[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [tor-bugs] #29154 [Core Tor/Tor]: My tor does not work anymore!



#29154: My tor does not work anymore!
--------------------------+----------------------------------
 Reporter:  killerbee     |          Owner:  (none)
     Type:  defect        |         Status:  new
 Priority:  Medium        |      Milestone:  Tor: unspecified
Component:  Core Tor/Tor  |        Version:
 Severity:  Normal        |     Resolution:
 Keywords:                |  Actual Points:
Parent ID:                |         Points:
 Reviewer:                |        Sponsor:
--------------------------+----------------------------------

Comment (by killerbee):

 -- MY TORRC FILE --

 ## Configuration file for a typical Tor user

 ## Last updated 22 December 2017 for Tor 0.3.2.8-rc.

 ## (may or may not work for much older or much newer versions of Tor.)

 ##

 ## Lines that begin with "## " try to explain what's going on. Lines

 ## that begin with just "#" are disabled commands: you can enable them

 ## by removing the "#" symbol.

 ##

 ## See 'man tor', or !https://www.torproject.org/docs/tor-manual.html,

 ## for more options you can use in this file.

 ##

 ## Tor will look for this file in various places based on your platform:

 ## !https://www.torproject.org/docs/faq#torrc

 ## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't

 ## configure one below. Set "SOCKSPort 0" if you plan to run Tor only

 ## as a relay, and not make any local application connections yourself.

 #SOCKSPort 9050 # Default: Bind to !localhost:9050 for local connections.

 #SOCKSPort 192.168.0.1:9100 # Bind to this !address:port too.

 ## Entry policies to allow/deny SOCKS requests based on IP address.

 ## First entry that matches wins. If no SOCKSPolicy is set, we accept

 ## all (and only) requests that reach a SOCKSPort. Untrusted users who

 ## can access your SOCKSPort may be able to learn about the connections

 ## you make.

 #SOCKSPolicy accept 192.168.0.0/16

 #SOCKSPolicy accept6 FC00::/7

 #SOCKSPolicy reject *

 ## Logs go to stdout at level "notice" unless redirected by something

 ## else, like one of the below lines. You can have as many Log lines as

 ## you want.

 ##

 ## We advise using "notice" in most cases, since anything more verbose

 ## may provide sensitive information to an attacker who obtains the logs.

 ##

 ## Send all messages of level 'notice' or higher to
 @LOCALSTATEDIR@/log/tor/notices.log

 #Log notice file @LOCALSTATEDIR@/log/tor/notices.log

 ## Send every possible message to @LOCALSTATEDIR@/log/tor/debug.log

 #Log debug file @LOCALSTATEDIR@/log/tor/debug.log

 ## Use the system log instead of Tor's logfiles

 #Log notice syslog

 ## To send all messages to stderr:

 #Log debug stderr

 ## Uncomment this to start the process in the background... or use

 ## --runasdaemon 1 on the command line. This is ignored on Windows;

 ## see the FAQ entry if you want Tor to run as an NT service.

 #!RunAsDaemon 1

 ## The directory for keeping all the keys/etc. By default, we store

 ## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.

 #!DataDirectory @LOCALSTATEDIR@/lib/tor

 ## The port on which Tor will listen for local connections from Tor

 ## controller applications, as documented in control-spec.txt.

 #!ControlPort 9051

 ## If you enable the controlport, be sure to enable one of these

 ## authentication methods, to prevent attackers from accessing it.

 #!HashedControlPassword
 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C

 #!CookieAuthentication 1

 ############### This section is just for location-hidden services ###

 ## Once you have configured a hidden service, you can look at the

 ## contents of the file ".../hidden_service/hostname" for the address

 ## to tell people.

 ##

 ## !HiddenServicePort x !y:z says to redirect requests on port x to the

 ## address !y:z.

 #!HiddenServiceDir @LOCALSTATEDIR@/lib/tor/hidden_service/

 #!HiddenServicePort 80 127.0.0.1:80

 #!HiddenServiceDir @LOCALSTATEDIR@/lib/tor/other_hidden_service/

 #!HiddenServicePort 80 127.0.0.1:80

 #!HiddenServicePort 22 127.0.0.1:22

 ################ This section is just for relays #####################

 #

 ## See !https://www.torproject.org/docs/tor-doc-relay for details.

 ## Required: what port to advertise for incoming Tor connections.

 #ORPort 9001

 ## If you want to listen on a port other than the one advertised in

 ## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as

 ## follows. You'll need to do ipchains or other port forwarding

 ## yourself to make this work.

 #ORPort 443 !NoListen

 #ORPort 127.0.0.1:9090 !NoAdvertise

 ## The IP address or full DNS name for incoming connections to your

 ## relay. Leave commented out and Tor will guess.

 #Address noname.example.com

 ## If you have multiple network interfaces, you can specify one for

 ## outgoing traffic to use.

 ## !OutboundBindAddressExit will be used for all exit traffic, while

 ## OutboundBindAddressOR will be used for all OR and Dir connections

 ## (DNS connections ignore !OutboundBindAddress).

 ## If you do not wish to differentiate, use !OutboundBindAddress to

 ## specify the same address for both in a single line.

 #!OutboundBindAddressExit 10.0.0.4

 #OutboundBindAddressOR 10.0.0.5

 ## A handle for your relay, so people don't have to refer to it by key.

 ## Nicknames must be between 1 and 19 characters inclusive, and must

 ## contain only the characters [a-zA-Z0-9].

 ## If not set, "Unnamed" will be used.

 #Nickname ididnteditheconfig

 ## Define these to limit how much relayed traffic you will allow. Your

 ## own traffic is still unthrottled. Note that !RelayBandwidthRate must

 ## be at least 75 kilobytes per second.

 ## Note that units for these config options are bytes (per second), not

 ## bits (per second), and that prefixes are binary prefixes, i.e. 2!^10,

 ## 2!^20, etc.

 #!RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)

 #!RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb)

 ## Use these to restrict the maximum traffic per day, week, or month.

 ## Note that this threshold applies separately to sent and received bytes,

 ## not to their sum: setting "40 GB" may allow up to 80 GB total before

 ## hibernating.

 ##

 ## Set a maximum of 40 gigabytes each way per period.

 #!AccountingMax 40 GBytes

 ## Each period starts daily at midnight (!AccountingMax is per day)

 #!AccountingStart day 00:00

 ## Each period starts on the 3rd of the month at 15:00 (!AccountingMax

 ## is per month)

 #!AccountingStart month 3 15:00

 ## Administrative contact information for this relay or bridge. This line

 ## can be used to contact you if your relay or bridge is misconfigured or

 ## something else goes wrong. Note that we archive and publish all

 ## descriptors containing these lines and that Google indexes them, so

 ## spammers might also collect them. You may want to obscure the fact that

 ## it's an email address and/or generate a new address for this purpose.

 ##

 ## If you are running multiple relays, you MUST set this option.

 ##

 #!ContactInfo Random Person <nobody AT example dot com>

 ## You might also include your PGP or GPG fingerprint if you have one:

 #!ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>

 ## Uncomment this to mirror directory information for others. Please do

 ## if you have enough bandwidth.

 #!DirPort 9030 # what port to advertise for directory connections

 ## If you want to listen on a port other than the one advertised in

 ## !DirPort (e.g. to advertise 80 but bind to 9091), you can do it as

 ## follows. below too. You'll need to do ipchains or other port

 ## forwarding yourself to make this work.

 #!DirPort 80 !NoListen

 #!DirPort 127.0.0.1:9091 !NoAdvertise

 ## Uncomment to return an arbitrary blob of html on your !DirPort. Now you

 ## can explain what Tor is if anybody wonders why your IP address is

 ## contacting them. See contrib/tor-exit-notice.html in Tor's source

 ## distribution for a sample.

 #!DirPortFrontPage @CONFDIR@/tor-exit-notice.html

 ## Uncomment this if you run more than one Tor relay, and add the identity

 ## key fingerprint of each Tor relay you control, even if they're on

 ## different networks. You declare it here so Tor clients can avoid

 ## using more than one of your relays in a single circuit. See

 ## !https://www.torproject.org/docs/faq#MultipleRelays

 ## However, you should never include a bridge's fingerprint here, as it
 would

 ## break its concealability and potentially reveal its IP/TCP address.

 ##

 ## If you are running multiple relays, you MUST set this option.

 ##

 ## Note: do not use !MyFamily on bridge relays.

 #!MyFamily $keyid,$keyid,...

 ## Uncomment this if you do *not* want your relay to allow any exit
 traffic.

 ## (Relays allow exit traffic by default.)

 #!ExitRelay 0

 ## Uncomment this if you want your relay to allow IPv6 exit traffic.

 ## (Relays only allow IPv4 exit traffic by default.)

 #IPv6Exit 1

 ## A comma-separated list of exit policies. They're considered first

 ## to last, and the first match wins.

 ##

 ## If you want to allow the same ports on IPv4 and IPv6, write your rules

 ## using accept/reject *. If you want to allow different ports on IPv4 and

 ## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4
 rules

 ## using accept/reject *4.

 ##

 ## If you want to _replace_ the default exit policy, end this with either
 a

 ## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending
 to)

 ## the default exit policy. Leave commented to just use the default, which
 is

 ## described in the man page or at

 ## !https://www.torproject.org/documentation.html

 ##

 ## Look at !https://www.torproject.org/faq-abuse.html#TypicalAbuses

 ## for issues you might encounter if you use the default exit policy.

 ##

 ## If certain IPs and ports are blocked externally, e.g. by your firewall,

 ## you should update your exit policy to reflect this -- otherwise Tor

 ## users will be told that those destinations are down.

 ##

 ## For security, by default Tor rejects connections to private (local)

 ## networks, including to the configured primary public IPv4 and IPv6
 addresses,

 ## and any public IPv4 and IPv6 addresses on any interface on the relay.

 ## See the man page entry for !ExitPolicyRejectPrivate if you want to
 allow

 ## "exit enclaving".

 ##

 #!ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and
 IPv6 but no more

 #!ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as
 default exit policy

 #!ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as
 default exit policy

 #!ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as
 default exit policy

 #!ExitPolicy reject *:* # no exits allowed

 ## Bridge relays (or "bridges") are Tor relays that aren't listed in the

 ## main directory. Since there is no complete public list of them, even an

 ## ISP that filters connections to all the known Tor relays probably

 ## won't be able to block all the bridges. Also, websites won't treat you

 ## differently because they won't know you're running Tor. If you can

 ## be a real relay, please do; but if not, be a bridge!

 ##

 ## Warning: when running your Tor as a bridge, make sure than !MyFamily is

 ## NOT configured.

 #!BridgeRelay 1

 ## By default, Tor will advertise your bridge to users through various

 ## mechanisms like !https://bridges.torproject.org/. If you want to run

 ## a private bridge, for example because you'll give out your bridge

 ## address manually to your friends, uncomment this line:

 #!PublishServerDescriptor 0

 ## Configuration options can be imported from files or folders using the
 %include

 ## option with the value being a path. If the path is a file, the options
 from the

 ## file will be parsed as if they were written where the %include option
 is. If

 ## the path is a folder, all files on that folder will be parsed following
 lexical

 ## order. Files starting with a dot are ignored. Files on subfolders are
 ignored.

 ## The %include option can be used recursively.

 #%include /etc/torrc.d/

 #%include /etc/torrc.custom

 Thank you teor!
 Mike

--
Ticket URL: <https://trac.torproject.org/projects/tor/ticket/29154#comment:5>
Tor Bug Tracker & Wiki <https://trac.torproject.org/>
The Tor Project: anonymity online
_______________________________________________
tor-bugs mailing list
tor-bugs@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-bugs