[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[tor-commits] [stem/master] Resync manual data



commit 530b3bc144a7d323ce30aa604eff63560c716400
Author: Damian Johnson <atagar@xxxxxxxxxxxxxx>
Date:   Sat Apr 21 16:53:56 2018 -0700

    Resync manual data
    
    Tests we're adding are for the ONLINE test target, so getting us to a spot
    first where everything passes.
---
 stem/cached_tor_manual.sqlite | Bin 239616 -> 238592 bytes
 stem/manual.py                |  15 +++++++++++++--
 stem/settings.cfg             |   9 ++-------
 test/integ/manual.py          |  38 ++++----------------------------------
 4 files changed, 19 insertions(+), 43 deletions(-)

diff --git a/stem/cached_tor_manual.sqlite b/stem/cached_tor_manual.sqlite
index 749bf86b..6b17f4da 100644
Binary files a/stem/cached_tor_manual.sqlite and b/stem/cached_tor_manual.sqlite differ
diff --git a/stem/manual.py b/stem/manual.py
index 0bff9b68..3d734026 100644
--- a/stem/manual.py
+++ b/stem/manual.py
@@ -758,8 +758,19 @@ def _add_config_options(config_options, category, lines):
 
   last_option, usage, description = None, None, []
 
-  if lines and lines[0].startswith('The following options'):
-    lines = lines[lines.index(''):]  # drop the initial description
+  # Drop the section description. Each ends with a paragraph saying 'The
+  # following options...'.
+
+  desc_paragraph_index = None
+
+  for i, line in enumerate(lines):
+    if 'The following options' in line:
+      desc_paragraph_index = i
+      break
+
+  if desc_paragraph_index is not None:
+    lines = lines[desc_paragraph_index:]  # trim to the description paragrah
+    lines = lines[lines.index(''):]  # drop the paragraph
 
   for line in lines:
     if line and not line.startswith(' '):
diff --git a/stem/settings.cfg b/stem/settings.cfg
index 5ce1cfa0..7e84210c 100644
--- a/stem/settings.cfg
+++ b/stem/settings.cfg
@@ -32,7 +32,6 @@ manual.important ExitPolicy
 manual.important MyFamily
 manual.important Nickname
 manual.important ORPort
-manual.important PortForwarding
 manual.important AccountingMax
 manual.important AccountingStart
 
@@ -190,8 +189,8 @@ manual.summary.RejectPlaintextPorts Prevents connections on risky ports
 manual.summary.OptimisticData Use exits without confirmation that prior connections succeeded
 manual.summary.Tor2webMode Establish non-anonymous hidden service connections
 manual.summary.Tor2webRendezvousPoints Rendezvous points to use for hidden services when in Tor2webMode
-manual.summary._HSLayer2Nodes # TODO: https://trac.torproject.org/projects/tor/ticket/25581
-manual.summary._HSLayer3Nodes # TODO: https://trac.torproject.org/projects/tor/ticket/25581
+manual.summary.HSLayer2Nodes permissible relays for the second hop of HS circuits
+manual.summary.HSLayer3Nodes permissible relays for the third hop of HS circuits
 manual.summary.UseMicrodescriptors Retrieve microdescriptors rather than server descriptors
 manual.summary.PathBiasCircThreshold Number of circuits through a guard before applying bias checks
 manual.summary.PathBiasNoticeRate Fraction of circuits that must succeed before logging a notice
@@ -222,7 +221,6 @@ manual.summary.BridgeDistribution Distribution method BrideDB should provide our
 manual.summary.ContactInfo Contact information for this relay
 manual.summary.ExitRelay Allow relaying of exit traffic
 manual.summary.ExitPolicy Traffic destinations that can exit from this relay
-manual.summary.ExitPolicyDefault # TODO: https://trac.torproject.org/projects/tor/ticket/25582
 manual.summary.ExitPolicyRejectPrivate Prevent exiting on the local network
 manual.summary.ExitPolicyRejectLocalInterfaces More extensive prevention of exiting on the local network
 manual.summary.ReducedExitPolicy Customized reduced exit policy 
@@ -232,8 +230,6 @@ manual.summary.MyFamily Other relays this operator administers
 manual.summary.Nickname Identifier for this relay
 manual.summary.NumCPUs Number of processes spawned for decryption
 manual.summary.ORPort Port used to accept relay traffic
-manual.summary.PortForwarding Use UPnP or NAT-PMP if needed to relay
-manual.summary.PortForwardingHelper Executable for configuring port forwarding
 manual.summary.PublishServerDescriptor Types of descriptors published
 manual.summary.ShutdownWaitLength Delay before quitting after receiving a SIGINT signal
 manual.summary.SSLKeyLifetime Lifetime for our link certificate
@@ -369,7 +365,6 @@ manual.summary.TestingDirAuthVoteHSDir Relays to give the HSDir flag to
 manual.summary.TestingDirAuthVoteHSDirIsStrict Only grant the HSDir flag to relays listed by TestingDirAuthVoteHSDir
 manual.summary.TestingEnableConnBwEvent Allow controllers to request CONN_BW events
 manual.summary.TestingEnableCellStatsEvent Allow controllers to request CELL_STATS events
-manual.summary.TestingEnableTbEmptyEvent Allow controllers to request TB_EMPTY events
 manual.summary.TestingMinExitFlagThreshold Lower bound for assigning the Exit flag
 manual.summary.TestingLinkCertLifetime Duration of our ed25519 certificate
 manual.summary.TestingAuthKeyLifetime Duration for our ed25519 signing key
diff --git a/test/integ/manual.py b/test/integ/manual.py
index b08179db..fa7e0ca5 100644
--- a/test/integ/manual.py
+++ b/test/integ/manual.py
@@ -52,39 +52,8 @@ EXPECTED_FILE_DESCRIPTION = 'Specify a new configuration file to contain further
 
 EXPECTED_BANDWIDTH_RATE_DESCRIPTION = 'A token bucket limits the average incoming bandwidth usage on this node to the specified number of bytes per second, and the average outgoing bandwidth usage to that same value. If you want to run a relay in the public network, this needs to be at the very least 75 KBytes for a relay (that is, 600 kbits) or 50 KBytes for a bridge (400 kbits) -- but of course, more is better; we recommend at least 250 KBytes (2 mbits) if possible. (Default: 1 GByte)\n\nNote that this option, and other bandwidth-limiting options, apply to TCP data only: They do not count TCP headers or DNS traffic.\n\nWith this option, and in other options that take arguments in bytes, KBytes, and so on, other formats are also supported. Notably, "KBytes" can also be written as "kilobytes" or "kb"; "MBytes" can be written as "megabytes" or "MB"; "kbits" can be written as "kilobits"; and so forth. Tor also accepts "byte" and "bit" in the singular. The prefixes "tera" and "T" are a
 lso recognized. If no units are given, we default to bytes. To avoid confusion, we recommend writing "bytes" or "bits" explicitly, since it\'s easy to forget that "B" means bytes, not bits.'
 
-EXPECTED_EXIT_POLICY_DESCRIPTION = """
-Set an exit policy for this server. Each policy is of the form "accept[6]|reject[6] ADDR[/MASK][:PORT]". If /MASK is omitted then this policy just applies to the host given. Instead of giving a host or network you can also use "*" to denote the universe (0.0.0.0/0 and ::/128), or *4 to denote all IPv4 addresses, and *6 to denote all IPv6 addresses.  PORT can be a single port number, an interval of ports "FROM_PORT-TO_PORT", or "*". If PORT is omitted, that means "*".
-
-For example, "accept 18.7.22.69:*,reject 18.0.0.0/8:*,accept *:*" would reject any IPv4 traffic destined for MIT except for web.mit.edu, and accept any other IPv4 or IPv6 traffic.
-
-Tor also allows IPv6 exit policy entries. For instance, "reject6 [FC00::]/7:*" rejects all destinations that share 7 most significant bit prefix with address FC00::. Respectively, "accept6 [C000::]/3:*" accepts all destinations that share 3 most significant bit prefix with address C000::.
-
-accept6 and reject6 only produce IPv6 exit policy entries. Using an IPv4 address with accept6 or reject6 is ignored and generates a warning. accept/reject allows either IPv4 or IPv6 addresses. Use *4 as an IPv4 wildcard address, and *6 as an IPv6 wildcard address. accept/reject * expands to matching IPv4 and IPv6 wildcard address rules.
-
-To specify all IPv4 and IPv6 internal and link-local networks (including 0.0.0.0/8, 169.254.0.0/16, 127.0.0.0/8, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, [::]/8, [FC00::]/7, [FE80::]/10, [FEC0::]/10, [FF00::]/8, and [::]/127), you can use the "private" alias instead of an address. ("private" always produces rules for IPv4 and IPv6 addresses, even when used with accept6/reject6.)
-
-Private addresses are rejected by default (at the beginning of your exit policy), along with any configured primary public IPv4 and IPv6 addresses. These private addresses are rejected unless you set the ExitPolicyRejectPrivate config option to 0. For example, once you've done that, you could allow HTTP to 127.0.0.1 and block all other connections to internal networks with "accept 127.0.0.1:80,reject private:*", though that may also allow connections to your own computer that are addressed to its public (external) IP address. See RFC 1918 and RFC 3330 for more details about internal and reserved IP address space. See ExitPolicyRejectLocalInterfaces if you want to block every address on the relay, even those that aren't advertised in the descriptor.
-
-This directive can be specified multiple times so you don't have to put it all on one line.
-
-Policies are considered first to last, and the first match wins. If you want to allow the same ports on IPv4 and IPv6, write your rules using accept/reject *. If you want to allow different ports on IPv4 and IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules using accept/reject *4. If you want to _replace_ the default exit policy, end your exit policy with either a reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to) the default exit policy.
-
-If you want to use a reduced exit policy rather than the default exit policy, set "ReducedExitPolicy 1". If you want to replace the default exit policy with your custom exit policy, end your exit policy with either a reject : or an accept :. Otherwise, you're augmenting (prepending to) the default or reduced exit policy.
-
-The default exit policy is:
-
-    reject *:25
-    reject *:119
-    reject *:135-139
-    reject *:445
-    reject *:563
-    reject *:1214
-    reject *:4661-4666
-    reject *:6346-6429
-    reject *:6699
-    reject *:6881-6999
-    accept *:*
-""".strip()
+EXPECTED_EXIT_POLICY_DESCRIPTION_START = 'Set an exit policy for this server. Each policy'
+EXPECTED_EXIT_POLICY_DESCRIPTION_END = 'it applies to both IPv4 and IPv6 addresses.'
 
 
 class TestManual(unittest.TestCase):
@@ -164,7 +133,8 @@ class TestManual(unittest.TestCase):
       return
 
     manual = stem.manual.Manual.from_man(self.man_path)
-    self.assertEqual(EXPECTED_EXIT_POLICY_DESCRIPTION, manual.config_options['ExitPolicy'].description)
+    self.assertTrue(manual.config_options['ExitPolicy'].description.startswith(EXPECTED_EXIT_POLICY_DESCRIPTION_START))
+    self.assertTrue(manual.config_options['ExitPolicy'].description.endswith(EXPECTED_EXIT_POLICY_DESCRIPTION_END))
 
   def test_that_cache_is_up_to_date(self):
     """



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits