[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[tor-commits] [tor/master] manpage: alphabetize General Options



commit 21b3073b9ad3e49182352cb8c7e3111aa0757f70
Author: Swati Thacker <swati.kgp13@xxxxxxxxx>
Date:   Tue Nov 26 14:41:03 2019 +0530

    manpage: alphabetize General Options
    
    Part of ticket 32708.
---
 doc/tor.1.txt | 562 +++++++++++++++++++++++++++++-----------------------------
 1 file changed, 280 insertions(+), 282 deletions(-)

diff --git a/doc/tor.1.txt b/doc/tor.1.txt
index ae08c31c1..7e70bb67e 100644
--- a/doc/tor.1.txt
+++ b/doc/tor.1.txt
@@ -227,6 +227,43 @@ forward slash (/) in the configuration file and on the command line.
 
 GENERAL OPTIONS
 ---------------
+[[AccelDir]] **AccelDir** __DIR__::
+    Specify this option if using dynamic hardware acceleration and the engine
+    implementation library resides somewhere other than the OpenSSL default.
+    Can not be changed while tor is running.
+
+[[AccelName]] **AccelName** __NAME__::
+    When using OpenSSL hardware crypto acceleration attempt to load the dynamic
+    engine of this name. This must be used for any dynamic hardware engine.
+    Names can be verified with the openssl engine command. Can not be changed
+    while tor is running.
+ +
+    If the engine name is prefixed with a "!", then Tor will exit if the
+    engine cannot be loaded.
+
+[[AlternateBridgeAuthority]] **AlternateBridgeAuthority** [__nickname__] [**flags**] __ipv4address__:__port__ __ fingerprint__::
+[[AlternateDirAuthority]] **AlternateDirAuthority** [__nickname__] [**flags**] __ipv4address__:__port__ __fingerprint__::
+    These options behave as DirAuthority, but they replace fewer of the
+    default directory authorities. Using
+    AlternateDirAuthority replaces the default Tor directory authorities, but
+    leaves the default bridge authorities in
+    place.  Similarly,
+    AlternateBridgeAuthority replaces the default bridge authority,
+    but leaves the directory authorities alone.
+
+[[AndroidIdentityTag]] **AndroidIdentityTag** __tag__::
+    When logging to Android's logging subsystem, adds a tag to the log identity
+    such that log entries are marked with "Tor-__tag__". Can not be changed while
+    tor is running. (Default: none)
+
+[[AvoidDiskWrites]] **AvoidDiskWrites** **0**|**1**::
+    If non-zero, try to write to disk less frequently than we would otherwise.
+    This is useful when running on flash memory or other media that support
+    only a limited number of writes. (Default: 0)
+
+[[BandwidthBurst]] **BandwidthBurst** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
+    Limit the maximum token bucket size (also known as the burst) to the given
+    number of bytes in each direction. (Default: 1 GByte)
 
 [[BandwidthRate]] **BandwidthRate** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
     A token bucket limits the average incoming bandwidth usage on this node
@@ -254,41 +291,27 @@ GENERAL OPTIONS
     To avoid confusion, we recommend writing "bytes" or "bits" explicitly,
     since it's easy to forget that "B" means bytes, not bits.
 
-[[BandwidthBurst]] **BandwidthBurst** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
-    Limit the maximum token bucket size (also known as the burst) to the given
-    number of bytes in each direction. (Default: 1 GByte)
-
-[[MaxAdvertisedBandwidth]] **MaxAdvertisedBandwidth** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
-    If set, we will not advertise more than this amount of bandwidth for our
-    BandwidthRate. Server operators who want to reduce the number of clients
-    who ask to build circuits through them (since this is proportional to
-    advertised bandwidth rate) can thus reduce the CPU demands on their server
-    without impacting network performance.
-
-[[RelayBandwidthRate]] **RelayBandwidthRate** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
-    If not 0, a separate token bucket limits the average incoming bandwidth
-    usage for \_relayed traffic_ on this node to the specified number of bytes
-    per second, and the average outgoing bandwidth usage to that same value.
-    Relayed traffic currently is calculated to include answers to directory
-    requests, but that may change in future versions. They do not include directory
-    fetches by the relay (from authority or other relays), because that is considered
-    "client" activity.  (Default: 0)
-
-[[RelayBandwidthBurst]] **RelayBandwidthBurst** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
-    If not 0, limit the maximum token bucket size (also known as the burst) for
-    \_relayed traffic_ to the given number of bytes in each direction.
-    They do not include directory fetches by the relay (from authority
-    or other relays), because that is considered "client" activity. (Default: 0)
+[[CacheDirectory]] **CacheDirectory** __DIR__::
+    Store cached directory data in DIR. Can not be changed while tor is
+    running.
+    (Default: uses the value of DataDirectory.)
 
-[[PerConnBWRate]] **PerConnBWRate** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
-    If this option is set manually, or via the "perconnbwrate" consensus
-    field, Tor will use it for separate rate limiting for each connection
-    from a non-relay. (Default: 0)
+[[CacheDirectoryGroupReadable]] **CacheDirectoryGroupReadable** **0**|**1**|**auto**::
+    If this option is set to 0, don't allow the filesystem group to read the
+    CacheDirectory. If the option is set to 1, make the CacheDirectory readable
+    by the default GID. If the option is "auto", then we use the
+    setting for DataDirectoryGroupReadable when the CacheDirectory is the
+    same as the DataDirectory, and 0 otherwise. (Default: auto)
 
-[[PerConnBWBurst]] **PerConnBWBurst** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
-    If this option is set manually, or via the "perconnbwburst" consensus
-    field, Tor will use it for separate rate limiting for each connection
-    from a non-relay. (Default: 0)
+[[CircuitPriorityHalflife]] **CircuitPriorityHalflife** __NUM__::
+    If this value is set, we override the default algorithm for choosing which
+    circuit's cell to deliver or relay next. It is delivered first to the
+    circuit that has the lowest weighted cell count, where cells are weighted
+    exponentially according to this value (in seconds). If the value is -1, it
+    is taken from the consensus if possible else it will fallback to the
+    default value of 30. Minimum: 1, Maximum: 2147483647. This can be defined
+    as a float value. This is an advanced option; you generally shouldn't have
+    to mess with it. (Default: -1)
 
 [[ClientTransportPlugin]] **ClientTransportPlugin** __transport__ socks4|socks5 __IP__:__PORT__::
 **ClientTransportPlugin** __transport__ exec __path-to-binary__ [options]::
@@ -304,39 +327,6 @@ GENERAL OPTIONS
     forwards its traffic to it. It's the duty of that proxy to properly forward
     the traffic to the bridge. (Default: none)
 
-[[ServerTransportPlugin]] **ServerTransportPlugin** __transport__ exec __path-to-binary__ [options]::
-    The Tor relay launches the pluggable transport proxy in __path-to-binary__
-    using __options__ as its command-line options, and expects to receive
-    proxied client traffic from it. (Default: none)
-
-[[ServerTransportListenAddr]] **ServerTransportListenAddr** __transport__ __IP__:__PORT__::
-    When this option is set, Tor will suggest __IP__:__PORT__ as the
-    listening address of any pluggable transport proxy that tries to
-    launch __transport__. (IPv4 addresses should written as-is; IPv6
-    addresses should be wrapped in square brackets.) (Default: none)
-
-[[ServerTransportOptions]] **ServerTransportOptions** __transport__ __k=v__ __k=v__ ...::
-    When this option is set, Tor will pass the __k=v__ parameters to
-    any pluggable transport proxy that tries to launch __transport__. +
-    (Example: ServerTransportOptions obfs45 shared-secret=bridgepasswd cache=/var/lib/tor/cache) (Default: none)
-
-[[ExtORPort]] **ExtORPort** \['address':]__port__|**auto**::
-    Open this port to listen for Extended ORPort connections from your
-    pluggable transports. +
-    (Default: **DataDirectory**/extended_orport_auth_cookie)
-
-[[ExtORPortCookieAuthFile]] **ExtORPortCookieAuthFile** __Path__::
-    If set, this option overrides the default location and file name
-    for the Extended ORPort's cookie file -- the cookie file is needed
-    for pluggable transports to communicate through the Extended ORPort.
-
-[[ExtORPortCookieAuthFileGroupReadable]] **ExtORPortCookieAuthFileGroupReadable** **0**|**1**::
-    If this option is set to 0, don't allow the filesystem group to read the
-    Extended OR Port cookie file. If the option is set to 1, make the cookie
-    file readable by the default GID. [Making the file readable by other
-    groups is not yet implemented; let us know if you need this for some
-    reason.] (Default: 0)
-
 [[ConnLimit]] **ConnLimit** __NUM__::
     The minimum number of file descriptors that must be available to the Tor
     process before it will start. Tor will ask the OS for as many file
@@ -353,15 +343,6 @@ GENERAL OPTIONS
     adjust **ConnLimit** itself. It has no effect on Windows, since that
     platform lacks getrlimit(). (Default: 1000)
 
-[[DisableNetwork]] **DisableNetwork** **0**|**1**::
-    When this option is set, we don't listen for or accept any connections
-    other than controller connections, and we close (and don't reattempt)
-    any outbound
-    connections.  Controllers sometimes use this option to avoid using
-    the network until Tor is fully configured.  Tor will make still certain
-    network-related calls (like DNS lookups) as a part of its configuration
-    process, even if DisableNetwork is set. (Default: 0)
-
 [[ConstrainedSockets]] **ConstrainedSockets** **0**|**1**::
     If set, Tor will tell the kernel to attempt to shrink the buffers for all
     sockets to the size specified in **ConstrainedSockSize**. This is useful for
@@ -414,6 +395,16 @@ GENERAL OPTIONS
         Unix domain sockets only: Do not insist that the directory
         that holds the socket be read-restricted.
 
+[[ControlPortFileGroupReadable]] **ControlPortFileGroupReadable** **0**|**1**::
+    If this option is set to 0, don't allow the filesystem group to read the
+    control port file. If the option is set to 1, make the control port
+    file readable by the default GID. (Default: 0)
+
+[[ControlPortWriteToFile]] **ControlPortWriteToFile** __Path__::
+    If set, Tor writes the address and port of any control port it opens to
+    this address.  Usable by controllers to learn the actual control port
+    when ControlPort is set to "auto".
+
 [[ControlSocket]] **ControlSocket** __Path__::
     Like ControlPort, but listens on a Unix domain socket, rather than a TCP
     socket. '0' disables ControlSocket. (Unix and Unix-like systems only.)
@@ -424,13 +415,6 @@ GENERAL OPTIONS
     write unix sockets (e.g. ControlSocket). If the option is set to 1, make
     the control socket readable and writable by the default GID. (Default: 0)
 
-[[HashedControlPassword]] **HashedControlPassword** __hashed_password__::
-    Allow connections on the control port if they present
-    the password whose one-way hash is __hashed_password__. You
-    can compute the hash of a password by running "tor --hash-password
-    __password__". You can provide several acceptable passwords by using more
-    than one HashedControlPassword line.
-
 [[CookieAuthentication]] **CookieAuthentication** **0**|**1**::
     If this option is set to 1, allow connections on the control port
     when the connecting process knows the contents of a file named
@@ -448,15 +432,11 @@ GENERAL OPTIONS
     the default GID. [Making the file readable by other groups is not yet
     implemented; let us know if you need this for some reason.] (Default: 0)
 
-[[ControlPortWriteToFile]] **ControlPortWriteToFile** __Path__::
-    If set, Tor writes the address and port of any control port it opens to
-    this address.  Usable by controllers to learn the actual control port
-    when ControlPort is set to "auto".
-
-[[ControlPortFileGroupReadable]] **ControlPortFileGroupReadable** **0**|**1**::
-    If this option is set to 0, don't allow the filesystem group to read the
-    control port file. If the option is set to 1, make the control port
-    file readable by the default GID. (Default: 0)
+[[CountPrivateBandwidth]] **CountPrivateBandwidth** **0**|**1**::
+    If this option is set, then Tor's rate-limiting applies not only to
+    remote connections, but also to connections to private addresses like
+    127.0.0.1 or 10.0.0.1.  This is mostly useful for debugging
+    rate-limiting.  (Default: 0)
 
 [[DataDirectory]] **DataDirectory** __DIR__::
     Store working data in DIR. Can not be changed while tor is running.
@@ -469,39 +449,6 @@ GENERAL OPTIONS
     DataDirectory. If the option is set to 1, make the DataDirectory readable
     by the default GID. (Default: 0)
 
-[[CacheDirectory]] **CacheDirectory** __DIR__::
-    Store cached directory data in DIR. Can not be changed while tor is
-    running.
-    (Default: uses the value of DataDirectory.)
-
-[[CacheDirectoryGroupReadable]] **CacheDirectoryGroupReadable** **0**|**1**|**auto**::
-    If this option is set to 0, don't allow the filesystem group to read the
-    CacheDirectory. If the option is set to 1, make the CacheDirectory readable
-    by the default GID. If the option is "auto", then we use the
-    setting for DataDirectoryGroupReadable when the CacheDirectory is the
-    same as the DataDirectory, and 0 otherwise. (Default: auto)
-
-[[FallbackDir]] **FallbackDir** __ipv4address__:__dirport__ orport=__orport__ id=__fingerprint__ [weight=__num__] [ipv6=**[**__ipv6address__**]**:__orport__]::
-    When tor is unable to connect to any directory cache for directory info
-    (usually because it doesn't know about any yet) it tries a hard-coded
-    directory. Relays try one directory authority at a time. Clients try
-    multiple directory authorities and FallbackDirs, to avoid hangs on
-    startup if a hard-coded directory is down. Clients wait for a few seconds
-    between each attempt, and retry FallbackDirs more often than directory
-    authorities, to reduce the load on the directory authorities.  +
- +
-    FallbackDirs should be stable relays with stable IP addresses, ports,
-    and identity keys. They must have a DirPort. +
- +
-    By default, the directory authorities are also FallbackDirs. Specifying a
-    FallbackDir replaces Tor's default hard-coded FallbackDirs (if any).
-    (See the **DirAuthority** entry for an explanation of each flag.)
-
-[[UseDefaultFallbackDirs]] **UseDefaultFallbackDirs** **0**|**1**::
-    Use Tor's default hard-coded FallbackDirs (if any). (When a
-    FallbackDir line is present, it replaces the hard-coded FallbackDirs,
-    regardless of the value of UseDefaultFallbackDirs.) (Default: 1)
-
 [[DirAuthority]] **DirAuthority** [__nickname__] [**flags**] __ipv4address__:__dirport__ __fingerprint__::
     Use a nonstandard authoritative directory server at the provided address
     and port, with the specified key fingerprint. This option can be repeated
@@ -540,17 +487,6 @@ GENERAL OPTIONS
     should be 1.0 or less. The default is less than 1, to reduce load on
     authorities. (Default: 0.1)
 
-[[AlternateDirAuthority]] **AlternateDirAuthority** [__nickname__] [**flags**] __ipv4address__:__port__ __fingerprint__ +
-
-[[AlternateBridgeAuthority]] **AlternateBridgeAuthority** [__nickname__] [**flags**] __ipv4address__:__port__ __ fingerprint__::
-    These options behave as DirAuthority, but they replace fewer of the
-    default directory authorities. Using
-    AlternateDirAuthority replaces the default Tor directory authorities, but
-    leaves the default bridge authorities in
-    place.  Similarly,
-    AlternateBridgeAuthority replaces the default bridge authority,
-    but leaves the directory authorities alone.
-
 [[DisableAllSwap]] **DisableAllSwap** **0**|**1**::
     If set to 1, Tor will attempt to lock all current and future memory pages,
     so that memory cannot be paged out. Windows, OS X and Solaris are currently
@@ -575,6 +511,55 @@ GENERAL OPTIONS
    this to 0 for the duration of your debugging. Normal users should leave it
    on. Disabling this option while Tor is running is prohibited. (Default: 1)
 
+[[DisableNetwork]] **DisableNetwork** **0**|**1**::
+    When this option is set, we don't listen for or accept any connections
+    other than controller connections, and we close (and don't reattempt)
+    any outbound
+    connections.  Controllers sometimes use this option to avoid using
+    the network until Tor is fully configured.  Tor will make still certain
+    network-related calls (like DNS lookups) as a part of its configuration
+    process, even if DisableNetwork is set. (Default: 0)
+
+[[ExtendByEd25519ID]] **ExtendByEd25519ID** **0**|**1**|**auto**::
+    If this option is set to 1, we always try to include a relay's Ed25519 ID
+    when telling the proceeding relay in a circuit to extend to it.
+    If this option is set to 0, we never include Ed25519 IDs when extending
+    circuits.  If the option is set to "default", we obey a
+    parameter in the consensus document. (Default: auto)
+
+[[ExtORPort]] **ExtORPort** \['address':]__port__|**auto**::
+    Open this port to listen for Extended ORPort connections from your
+    pluggable transports. +
+    (Default: **DataDirectory**/extended_orport_auth_cookie)
+
+[[ExtORPortCookieAuthFile]] **ExtORPortCookieAuthFile** __Path__::
+    If set, this option overrides the default location and file name
+    for the Extended ORPort's cookie file -- the cookie file is needed
+    for pluggable transports to communicate through the Extended ORPort.
+
+[[ExtORPortCookieAuthFileGroupReadable]] **ExtORPortCookieAuthFileGroupReadable** **0**|**1**::
+    If this option is set to 0, don't allow the filesystem group to read the
+    Extended OR Port cookie file. If the option is set to 1, make the cookie
+    file readable by the default GID. [Making the file readable by other
+    groups is not yet implemented; let us know if you need this for some
+    reason.] (Default: 0)
+
+[[FallbackDir]] **FallbackDir** __ipv4address__:__dirport__ orport=__orport__ id=__fingerprint__ [weight=__num__] [ipv6=**[**__ipv6address__**]**:__orport__]::
+    When tor is unable to connect to any directory cache for directory info
+    (usually because it doesn't know about any yet) it tries a hard-coded
+    directory. Relays try one directory authority at a time. Clients try
+    multiple directory authorities and FallbackDirs, to avoid hangs on
+    startup if a hard-coded directory is down. Clients wait for a few seconds
+    between each attempt, and retry FallbackDirs more often than directory
+    authorities, to reduce the load on the directory authorities.  +
+ +
+    FallbackDirs should be stable relays with stable IP addresses, ports,
+    and identity keys. They must have a DirPort. +
+ +
+    By default, the directory authorities are also FallbackDirs. Specifying a
+    FallbackDir replaces Tor's default hard-coded FallbackDirs (if any).
+    (See the **DirAuthority** entry for an explanation of each flag.)
+
 [[FetchDirInfoEarly]] **FetchDirInfoEarly** **0**|**1**::
     If set to 1, Tor will always fetch directory information like other
     directory caches, even if you don't meet the normal criteria for fetching
@@ -614,9 +599,20 @@ GENERAL OPTIONS
     flavour of consensues and descriptors that is fetched and used for
     building circuits. (Default: 0)
 
-[[HTTPProxy]] **HTTPProxy** __host__[:__port__]::
-    Tor will make all its directory requests through this host:port (or host:80
-    if port is not specified), rather than connecting directly to any directory
+[[HardwareAccel]] **HardwareAccel** **0**|**1**::
+    If non-zero, try to use built-in (static) crypto hardware acceleration when
+    available. Can not be changed while tor is running. (Default: 0)
+
+[[HashedControlPassword]] **HashedControlPassword** __hashed_password__::
+    Allow connections on the control port if they present
+    the password whose one-way hash is __hashed_password__. You
+    can compute the hash of a password by running "tor --hash-password
+    __password__". You can provide several acceptable passwords by using more
+    than one HashedControlPassword line.
+
+[[HTTPProxy]] **HTTPProxy** __host__[:__port__]::
+    Tor will make all its directory requests through this host:port (or host:80
+    if port is not specified), rather than connecting directly to any directory
     servers. (DEPRECATED: As of 0.3.1.0-alpha you should use HTTPSProxy.)
 
 [[HTTPProxyAuthenticator]] **HTTPProxyAuthenticator** __username:password__::
@@ -639,57 +635,23 @@ GENERAL OPTIONS
     proxy authentication that Tor supports; feel free to submit a patch if you
     want it to support others.
 
-[[Sandbox]] **Sandbox** **0**|**1**::
-    If set to 1, Tor will run securely through the use of a syscall sandbox.
-    Otherwise the sandbox will be disabled. The option is currently an
-    experimental feature. It only works on Linux-based operating systems,
-    and only when Tor has been built with the libseccomp library. This option
-    can not be changed while tor is running. +
- +
-    When the **Sandbox** is 1, the following options can not be changed when tor
-    is running:
-    **Address**,
-    **ConnLimit**,
-    **CookieAuthFile**,
-    **DirPortFrontPage**,
-    **ExtORPortCookieAuthFile**,
-    **Logs**,
-    **ServerDNSResolvConfFile**,
-    **ClientOnionAuthDir** (and any files in it won't reload on HUP signal).
- +
-    Launching new Onion Services through the control port is not supported
-    with current syscall sandboxing implementation.
- +
-    Tor must remain in client or server mode (some changes to **ClientOnly**
-    and **ORPort** are not allowed). Currently, if **Sandbox** is 1,
-    **ControlPort** command "GETINFO address" will not work.
- +
-    (Default: 0)
-
-[[Socks4Proxy]] **Socks4Proxy** __host__[:__port__]::
-    Tor will make all OR connections through the SOCKS 4 proxy at host:port
-    (or host:1080 if port is not specified).
-
-[[Socks5Proxy]] **Socks5Proxy** __host__[:__port__]::
-    Tor will make all OR connections through the SOCKS 5 proxy at host:port
-    (or host:1080 if port is not specified).
-
-[[Socks5ProxyUsername]] **Socks5ProxyUsername** __username__ +
-
-[[Socks5ProxyPassword]] **Socks5ProxyPassword** __password__::
-    If defined, authenticate to the SOCKS 5 server using username and password
-    in accordance to RFC 1929. Both username and password must be between 1 and
-    255 characters.
-
-[[UnixSocksGroupWritable]] **UnixSocksGroupWritable** **0**|**1**::
-    If this option is set to 0, don't allow the filesystem group to read and
-    write unix sockets (e.g. SocksPort unix:). If the option is set to 1, make
-    the Unix socket readable and writable by the default GID. (Default: 0)
-
 [[KeepalivePeriod]] **KeepalivePeriod** __NUM__::
     To keep firewalls from expiring connections, send a padding keepalive cell
     every NUM seconds on open connections that are in use. (Default: 5 minutes)
 
+[[KeepBindCapabilities]] **KeepBindCapabilities** **0**|**1**|**auto**::
+    On Linux, when we are started as root and we switch our identity using
+    the **User** option, the **KeepBindCapabilities** option tells us whether to
+    try to retain our ability to bind to low ports.  If this value is 1, we
+    try to keep the capability; if it is 0 we do not; and if it is **auto**,
+    we keep the capability only if we are configured to listen on a low port.
+    Can not be changed while tor is running.
+    (Default: auto.)
+[[LogMessageDomains]] **LogMessageDomains** **0**|**1**::
+    If 1, Tor includes message domains with each log message.  Every log
+    message currently has at least one domain; most currently have exactly
+    one.  This doesn't affect controller log messages. (Default: 0)
+
 [[Log]] **Log** __minSeverity__[-__maxSeverity__] **stderr**|**stdout**|**syslog**::
     Send all messages between __minSeverity__ and __maxSeverity__ to the standard
     output stream, the standard error stream, or to the system log. (The
@@ -739,10 +701,20 @@ GENERAL OPTIONS
     messages from domains other than networking and memory management, and all
     messages of severity notice or higher.
 
-[[LogMessageDomains]] **LogMessageDomains** **0**|**1**::
-    If 1, Tor includes message domains with each log message.  Every log
-    message currently has at least one domain; most currently have exactly
-    one.  This doesn't affect controller log messages. (Default: 0)
+[[LogTimeGranularity]] **LogTimeGranularity** __NUM__::
+    Set the resolution of timestamps in Tor's logs to NUM milliseconds.
+    NUM must be positive and either a divisor or a multiple of 1 second.
+    Note that this option only controls the granularity written by Tor to
+    a file or console log.  Tor does not (for example) "batch up" log
+    messages to affect times logged by a controller, times attached to
+    syslog messages, or the mtime fields on log files.  (Default: 1 second)
+
+[[MaxAdvertisedBandwidth]] **MaxAdvertisedBandwidth** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
+    If set, we will not advertise more than this amount of bandwidth for our
+    BandwidthRate. Server operators who want to reduce the number of clients
+    who ask to build circuits through them (since this is proportional to
+    advertised bandwidth rate) can thus reduce the CPU demands on their server
+    without impacting network performance.
 
 [[MaxUnparseableDescSizeToLog]] **MaxUnparseableDescSizeToLog** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**::
     Unparseable descriptors (e.g. for votes, consensuses, routers) are logged
@@ -751,6 +723,12 @@ GENERAL OPTIONS
     total; this is intended to be used to debug problems without opening live
     servers to resource exhaustion attacks. (Default: 10 MBytes)
 
+[[NoExec]] **NoExec** **0**|**1**::
+    If this option is set to 1, then Tor will never launch another
+    executable, regardless of the settings of ClientTransportPlugin
+    or ServerTransportPlugin.  Once this option has been set to 1,
+    it cannot be set back to 0 without restarting Tor. (Default: 0)
+
 [[OutboundBindAddress]] **OutboundBindAddress** __IP__::
     Make all outbound connections originate from the IP address specified. This
     is only useful when you have multiple network interfaces, and you want all
@@ -760,6 +738,15 @@ GENERAL OPTIONS
     This setting will be ignored for connections to the loopback addresses
     (127.0.0.0/8 and ::1), and is not used for DNS requests as well.
 
+[[OutboundBindAddressExit]] **OutboundBindAddressExit** __IP__::
+    Make all outbound exit connections originate from the IP address
+    specified. This option overrides **OutboundBindAddress** for the
+    same IP version. This option may be used twice, once with an IPv4
+    address and once with an IPv6 address.
+    IPv6 addresses should be wrapped in square brackets.
+    This setting will be ignored
+    for connections to the loopback addresses (127.0.0.0/8 and ::1).
+
 [[OutboundBindAddressOR]] **OutboundBindAddressOR** __IP__::
     Make all outbound non-exit (relay and other) connections
     originate from the IP address specified. This option overrides
@@ -769,14 +756,15 @@ GENERAL OPTIONS
     This setting will be ignored for connections to the loopback
     addresses (127.0.0.0/8 and ::1).
 
-[[OutboundBindAddressExit]] **OutboundBindAddressExit** __IP__::
-    Make all outbound exit connections originate from the IP address
-    specified. This option overrides **OutboundBindAddress** for the
-    same IP version. This option may be used twice, once with an IPv4
-    address and once with an IPv6 address.
-    IPv6 addresses should be wrapped in square brackets.
-    This setting will be ignored
-    for connections to the loopback addresses (127.0.0.0/8 and ::1).
+[[PerConnBWBurst]] **PerConnBWBurst** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
+    If this option is set manually, or via the "perconnbwburst" consensus
+    field, Tor will use it for separate rate limiting for each connection
+    from a non-relay. (Default: 0)
+
+[[PerConnBWRate]] **PerConnBWRate** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
+    If this option is set manually, or via the "perconnbwrate" consensus
+    field, Tor will use it for separate rate limiting for each connection
+    from a non-relay. (Default: 0)
 
 [[PidFile]] **PidFile** __FILE__::
     On startup, write our PID to FILE. On clean shutdown, remove
@@ -787,34 +775,27 @@ GENERAL OPTIONS
     following the Tor specification. Otherwise, they are logged with severity
     \'info'. (Default: 0)
 
+[[RelayBandwidthBurst]] **RelayBandwidthBurst** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
+    If not 0, limit the maximum token bucket size (also known as the burst) for
+    \_relayed traffic_ to the given number of bytes in each direction.
+    They do not include directory fetches by the relay (from authority
+    or other relays), because that is considered "client" activity. (Default: 0)
+
+[[RelayBandwidthRate]] **RelayBandwidthRate** __N__ **bytes**|**KBytes**|**MBytes**|**GBytes**|**TBytes**|**KBits**|**MBits**|**GBits**|**TBits**::
+    If not 0, a separate token bucket limits the average incoming bandwidth
+    usage for \_relayed traffic_ on this node to the specified number of bytes
+    per second, and the average outgoing bandwidth usage to that same value.
+    Relayed traffic currently is calculated to include answers to directory
+    requests, but that may change in future versions. They do not include directory
+    fetches by the relay (from authority or other relays), because that is considered
+    "client" activity.  (Default: 0)
+
 [[RunAsDaemon]] **RunAsDaemon** **0**|**1**::
     If 1, Tor forks and daemonizes to the background. This option has no effect
     on Windows; instead you should use the --service command-line option.
     Can not be changed while tor is running.
     (Default: 0)
 
-[[LogTimeGranularity]] **LogTimeGranularity** __NUM__::
-    Set the resolution of timestamps in Tor's logs to NUM milliseconds.
-    NUM must be positive and either a divisor or a multiple of 1 second.
-    Note that this option only controls the granularity written by Tor to
-    a file or console log.  Tor does not (for example) "batch up" log
-    messages to affect times logged by a controller, times attached to
-    syslog messages, or the mtime fields on log files.  (Default: 1 second)
-
-[[TruncateLogFile]] **TruncateLogFile** **0**|**1**::
-    If 1, Tor will overwrite logs at startup and in response to a HUP signal,
-    instead of appending to them. (Default: 0)
-
-[[SyslogIdentityTag]] **SyslogIdentityTag** __tag__::
-    When logging to syslog, adds a tag to the syslog identity such that
-    log entries are marked with "Tor-__tag__". Can not be changed while tor is
-    running. (Default: none)
-
-[[AndroidIdentityTag]] **AndroidIdentityTag** __tag__::
-    When logging to Android's logging subsystem, adds a tag to the log identity
-    such that log entries are marked with "Tor-__tag__". Can not be changed while
-    tor is running. (Default: none)
-
 [[SafeLogging]] **SafeLogging** **0**|**1**|**relay**::
     Tor can scrub potentially sensitive strings from log messages (e.g.
     addresses) by replacing them with the string [scrubbed]. This way logs can
@@ -828,70 +809,32 @@ GENERAL OPTIONS
     Note: Tor may not heed this option when logging at log levels below Notice.
     (Default: 1)
 
-[[User]] **User** __Username__::
-    On startup, setuid to this user and setgid to their primary group.
-    Can not be changed while tor is running.
-
-[[KeepBindCapabilities]] **KeepBindCapabilities** **0**|**1**|**auto**::
-    On Linux, when we are started as root and we switch our identity using
-    the **User** option, the **KeepBindCapabilities** option tells us whether to
-    try to retain our ability to bind to low ports.  If this value is 1, we
-    try to keep the capability; if it is 0 we do not; and if it is **auto**,
-    we keep the capability only if we are configured to listen on a low port.
-    Can not be changed while tor is running.
-    (Default: auto.)
-
-[[HardwareAccel]] **HardwareAccel** **0**|**1**::
-    If non-zero, try to use built-in (static) crypto hardware acceleration when
-    available. Can not be changed while tor is running. (Default: 0)
-
-[[AccelName]] **AccelName** __NAME__::
-    When using OpenSSL hardware crypto acceleration attempt to load the dynamic
-    engine of this name. This must be used for any dynamic hardware engine.
-    Names can be verified with the openssl engine command. Can not be changed
-    while tor is running.
+[[Sandbox]] **Sandbox** **0**|**1**::
+    If set to 1, Tor will run securely through the use of a syscall sandbox.
+    Otherwise the sandbox will be disabled. The option is currently an
+    experimental feature. It only works on Linux-based operating systems,
+    and only when Tor has been built with the libseccomp library. This option
+    can not be changed while tor is running. +
  +
-    If the engine name is prefixed with a "!", then Tor will exit if the
-    engine cannot be loaded.
-
-[[AccelDir]] **AccelDir** __DIR__::
-    Specify this option if using dynamic hardware acceleration and the engine
-    implementation library resides somewhere other than the OpenSSL default.
-    Can not be changed while tor is running.
-
-[[AvoidDiskWrites]] **AvoidDiskWrites** **0**|**1**::
-    If non-zero, try to write to disk less frequently than we would otherwise.
-    This is useful when running on flash memory or other media that support
-    only a limited number of writes. (Default: 0)
-
-[[CircuitPriorityHalflife]] **CircuitPriorityHalflife** __NUM__::
-    If this value is set, we override the default algorithm for choosing which
-    circuit's cell to deliver or relay next. It is delivered first to the
-    circuit that has the lowest weighted cell count, where cells are weighted
-    exponentially according to this value (in seconds). If the value is -1, it
-    is taken from the consensus if possible else it will fallback to the
-    default value of 30. Minimum: 1, Maximum: 2147483647. This can be defined
-    as a float value. This is an advanced option; you generally shouldn't have
-    to mess with it. (Default: -1)
-
-[[CountPrivateBandwidth]] **CountPrivateBandwidth** **0**|**1**::
-    If this option is set, then Tor's rate-limiting applies not only to
-    remote connections, but also to connections to private addresses like
-    127.0.0.1 or 10.0.0.1.  This is mostly useful for debugging
-    rate-limiting.  (Default: 0)
-
-[[ExtendByEd25519ID]] **ExtendByEd25519ID** **0**|**1**|**auto**::
-    If this option is set to 1, we always try to include a relay's Ed25519 ID
-    when telling the proceeding relay in a circuit to extend to it.
-    If this option is set to 0, we never include Ed25519 IDs when extending
-    circuits.  If the option is set to "default", we obey a
-    parameter in the consensus document. (Default: auto)
-
-[[NoExec]] **NoExec** **0**|**1**::
-    If this option is set to 1, then Tor will never launch another
-    executable, regardless of the settings of ClientTransportPlugin
-    or ServerTransportPlugin.  Once this option has been set to 1,
-    it cannot be set back to 0 without restarting Tor. (Default: 0)
+    When the **Sandbox** is 1, the following options can not be changed when tor
+    is running:
+    **Address**,
+    **ConnLimit**,
+    **CookieAuthFile**,
+    **DirPortFrontPage**,
+    **ExtORPortCookieAuthFile**,
+    **Logs**,
+    **ServerDNSResolvConfFile**,
+    **ClientOnionAuthDir** (and any files in it won't reload on HUP signal).
+ +
+    Launching new Onion Services through the control port is not supported
+    with current syscall sandboxing implementation.
+ +
+    Tor must remain in client or server mode (some changes to **ClientOnly**
+    and **ORPort** are not allowed). Currently, if **Sandbox** is 1,
+    **ControlPort** command "GETINFO address" will not work.
+ +
+    (Default: 0)
 
 [[Schedulers]] **Schedulers** **KIST**|**KISTLite**|**Vanilla**::
     Specify the scheduler type that tor should use. The scheduler is
@@ -931,6 +874,61 @@ GENERAL OPTIONS
     If KIST is used in Schedulers, this is a multiplier of the per-socket
     limit calculation of the KIST algorithm. (Default: 1.0)
 
+
+[[ServerTransportListenAddr]] **ServerTransportListenAddr** __transport__ __IP__:__PORT__::
+    When this option is set, Tor will suggest __IP__:__PORT__ as the
+    listening address of any pluggable transport proxy that tries to
+    launch __transport__. (IPv4 addresses should written as-is; IPv6
+    addresses should be wrapped in square brackets.) (Default: none)
+
+[[ServerTransportOptions]] **ServerTransportOptions** __transport__ __k=v__ __k=v__ ...::
+    When this option is set, Tor will pass the __k=v__ parameters to
+    any pluggable transport proxy that tries to launch __transport__. +
+    (Example: ServerTransportOptions obfs45 shared-secret=bridgepasswd cache=/var/lib/tor/cache) (Default: none)
+
+[[ServerTransportPlugin]] **ServerTransportPlugin** __transport__ exec __path-to-binary__ [options]::
+    The Tor relay launches the pluggable transport proxy in __path-to-binary__
+    using __options__ as its command-line options, and expects to receive
+    proxied client traffic from it. (Default: none)
+
+[[Socks4Proxy]] **Socks4Proxy** __host__[:__port__]::
+    Tor will make all OR connections through the SOCKS 4 proxy at host:port
+    (or host:1080 if port is not specified).
+
+[[Socks5Proxy]] **Socks5Proxy** __host__[:__port__]::
+    Tor will make all OR connections through the SOCKS 5 proxy at host:port
+    (or host:1080 if port is not specified).
+
+[[Socks5ProxyUsername]] **Socks5ProxyUsername** __username__ +
+
+[[Socks5ProxyPassword]] **Socks5ProxyPassword** __password__::
+    If defined, authenticate to the SOCKS 5 server using username and password
+    in accordance to RFC 1929. Both username and password must be between 1 and
+    255 characters.
+
+[[SyslogIdentityTag]] **SyslogIdentityTag** __tag__::
+    When logging to syslog, adds a tag to the syslog identity such that
+    log entries are marked with "Tor-__tag__". Can not be changed while tor is
+    running. (Default: none)
+
+[[TruncateLogFile]] **TruncateLogFile** **0**|**1**::
+    If 1, Tor will overwrite logs at startup and in response to a HUP signal,
+    instead of appending to them. (Default: 0)
+
+[[UnixSocksGroupWritable]] **UnixSocksGroupWritable** **0**|**1**::
+    If this option is set to 0, don't allow the filesystem group to read and
+    write unix sockets (e.g. SocksPort unix:). If the option is set to 1, make
+    the Unix socket readable and writable by the default GID. (Default: 0)
+
+[[UseDefaultFallbackDirs]] **UseDefaultFallbackDirs** **0**|**1**::
+    Use Tor's default hard-coded FallbackDirs (if any). (When a
+    FallbackDir line is present, it replaces the hard-coded FallbackDirs,
+    regardless of the value of UseDefaultFallbackDirs.) (Default: 1)
+
+[[User]] **User** __Username__::
+    On startup, setuid to this user and setgid to their primary group.
+    Can not be changed while tor is running.
+
 CLIENT OPTIONS
 --------------
 



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits