[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[tor-commits] [ooni-probe/master] flesh out tcp scan tutorial



commit acbf9de939b9a477fb7faea39e9206accc13abea
Author: poly <poly@xxxxxxxxxxxxxx>
Date:   Thu Apr 30 20:05:02 2015 +0400

    flesh out tcp scan tutorial
---
 docs/source/tutorial.rst |  119 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 117 insertions(+), 2 deletions(-)

diff --git a/docs/source/tutorial.rst b/docs/source/tutorial.rst
index 15afad7..4c0f4ce 100644
--- a/docs/source/tutorial.rst
+++ b/docs/source/tutorial.rst
@@ -5,7 +5,122 @@ Writing a TCP port scanner
 --------------------------
 
 Our goal is to write an OONI test that takes as input a list of ip:port
-combinations and attempts to detect which ones are reachable and open and
-which ones are not.
+combinations from a file and attempts to detect which ones are reachable
+and open and which ones are not.
 
+Following this tutorial requires basic knowledge of event-driven programming
+(specifically 'Twisted')
 
+Creating test
+--------------
+
+We base our test on the TCP subclass :class:`ooni.templates.tcpt.TCPTest`,
+since it the most suitable for our requirements. We then create the file
+'tcp_port_scanner.py' inside 'ooni/nettests/experimental'.
+
+All tests start in the 'experimental' directory, until they are tested
+and may then be moved to the stable test folders. 
+
+We start by adding our base class into 'tcp_port_scanner.py'::
+
+    class TCPPortScan(tcpt.TCPTest):
+
+Setup
+------
+
+OONI requires some basic information from all tests before running them.
+To provide this information we add the following to our test::
+
+    class TCPPortScan(tcpt.TCPTest):
+        name = 'TCP_port_scan_test'
+        author = 'OONI Contributor <ooni@xxxxxxxxxxxxxx>'
+        version = 0.0.1
+
+        # Some tests may require root access
+        requiresRoot = False
+        requiresTor  = False
+
+Inputs
+------
+
+We need to provide a file to read the IP addresses from. We can do
+this by adding::
+
+    class TCPPortScan(tcpt.TCPTest):
+        ...
+        inputFile = ['file', 'f', None, "Short file description"] 
+        requiredOptions = ['file']
+        ...
+
+When the test is run, the file will be opened by 
+:class:`ooni.nettest.NetTestCase.inputProcessor`. By default the
+'inputProcessor' will read line-by-line and feed them to the test.
+However, in this test case we may want to skip over the comment lines
+that start with a '#'. We override 'inputProcessor'::
+
+     class TCPPortScan(tcpt.TCPTest):
+        ...
+        def inputProcessor(self, filename):
+            fp = open(filename)
+            for x in fp.xreadlines():
+                if x.startswith("#"):
+                    continue
+                yield x.strip()
+            fp.close()
+        ...
+
+Once the test is run, the input may be accessed via 'self.input'.
+
+Writing Tests
+-------------
+
+Any functioned prefixed with 'test' will be run by OONI for each
+input. We implement the TCP connection test by adding::
+
+    class TCPPortScan(tcpt.TCPTest):
+        ...
+        def test_tcp_port(self):
+            def got_response(response):
+                self.report['connection_success'] = True
+                print "Connection Successful"
+
+            def connection_failed(failure):
+                self.report['connection_success'] = False
+                print "Connection Failed"
+
+            self.address = self.input.split(":")[0]
+            self.port    = self.input.split(":")[1]
+            payload = ""
+
+            d = self.sendPayload(payload)
+            d.addErrback(connection_failed)
+            d.addCallback(got_response)
+
+            return d
+
+Note that all test functions **must** return a Deferred object.
+As shown above, information can add to the OONI report using::
+
+    self.report['something'] = value
+
+Runninng Tests
+--------------
+
+If OONI is installed on your computer, you may run the above test
+by::
+
+    ooniprobe nettests/experimental/tcp_port_scanner.py -f /path/to/ip_list.txt
+
+By default, this will cause OONI to connect to tor and upload the results
+of the test. To save time during development, consider using the '-n' flag, 
+temporarily disabling upload. Additionally, the '-v' is also useful,
+as OONI by default doesn't print the line if a runtime error occurs::
+
+    ooniprobe -n -v nettests/experimental/tcp_port_scanner.py -f /path/to/ip_list.txt
+
+Reports
+-------
+
+Once 'ooniprobe' is invoked, a report will be created in the current working
+directory. This report is structed in the YAMLOO format - a format based on
+YAML.



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits