[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[tor-commits] [tor] 02/07: Clean up and disable switch rate limiting.
This is an automated email from the git hooks/post-receive script.
dgoulet pushed a commit to branch main
in repository tor.
commit c8341abf82fcf3cdd0f5c68f25b0526270dbbe2c
Author: Mike Perry <mikeperry-git@xxxxxxxxxxxxxx>
AuthorDate: Tue May 9 19:42:05 2023 +0000
Clean up and disable switch rate limiting.
Switch rate limiting will likely be helpful for limiting OOQ, but according to
shadow it was the cause of slower performance in Hong Kong endpoints.
So let's disable it, and then optimize for OOQ later.
---
src/core/or/conflux.c | 85 +++++++++++++++++++++++----------------------------
1 file changed, 39 insertions(+), 46 deletions(-)
diff --git a/src/core/or/conflux.c b/src/core/or/conflux.c
index e2e9460c06..5f6af9268b 100644
--- a/src/core/or/conflux.c
+++ b/src/core/or/conflux.c
@@ -209,7 +209,7 @@ circuit_ready_to_send(const circuit_t *circ)
* cwnd, because inflight is decremented before this check */
// TODO-329-TUNING: This subtraction not be right.. It depends
// on call order wrt decisions and sendme arrival
- if (cc->inflight + cc->sendme_inc >= cc->cwnd) {
+ if (cc->inflight >= cc->cwnd) {
cc_sendable = false;
}
@@ -289,6 +289,21 @@ conflux_decide_circ_lowrtt(const conflux_t *cfx)
return circ;
}
+/**
+ * Returns the amount of room in a cwnd on a circuit.
+ */
+static inline uint64_t
+cwnd_available(const circuit_t *on_circ)
+{
+ const congestion_control_t *cc = circuit_ccontrol(on_circ);
+ tor_assert(cc);
+
+ if (cc->cwnd < cc->inflight)
+ return 0;
+
+ return cc->cwnd - cc->inflight;
+}
+
/**
* Return the amount of congestion window we can send on
* on_circ during in_usec. However, if we're still in
@@ -300,42 +315,30 @@ cwnd_sendable(const circuit_t *on_circ, uint64_t in_usec,
uint64_t our_usec)
{
const congestion_control_t *cc = circuit_ccontrol(on_circ);
-
tor_assert(cc);
-
- // TODO-329-TUNING: This function may want to consider inflight?
+ uint64_t cwnd_adjusted = cwnd_available(on_circ);
if (our_usec == 0 || in_usec == 0) {
log_fn(LOG_PROTOCOL_WARN, LD_CIRC,
"cwnd_sendable: Missing RTT data. in_usec: %" PRIu64
" our_usec: %" PRIu64, in_usec, our_usec);
- return cc->cwnd;
+ return cwnd_adjusted;
}
if (cc->in_slow_start) {
- return cc->cwnd;
+ return cwnd_adjusted;
} else {
- uint64_t sendable =
- conflux_params_get_send_pct()*cc->cwnd*in_usec/(100*our_usec);
+ /* For any given leg, it has min_rtt/2 time before the 'primary'
+ * leg's acks start arriving. So, the amount of data this
+ * 'secondary' leg can send while the min_rtt leg transmits these
+ * acks is:
+ * (cwnd_leg/(leg_rtt/2))*min_rtt/2 = cwnd_leg*min_rtt/leg_rtt.
+ */
+ uint64_t sendable = cwnd_adjusted*in_usec/our_usec;
return MIN(cc->cwnd, sendable);
}
}
-/**
- * Returns the amount of room in a cwnd on a circuit.
- */
-static inline uint64_t
-cwnd_available(const circuit_t *on_circ)
-{
- const congestion_control_t *cc = circuit_ccontrol(on_circ);
- tor_assert(cc);
-
- if (cc->cwnd < cc->inflight)
- return 0;
-
- return cc->cwnd - cc->inflight;
-}
-
/**
* Returns true if we can switch to a new circuit, false otherwise.
*
@@ -360,15 +363,14 @@ conflux_can_switch(const conflux_t *cfx)
* of the congestion window, then we can switch.
* We check the sendme_inc because there may be un-ackable
* data in inflight as well, and we can still switch then. */
+ // TODO-329-TUNING: Should we try to switch if the prev_leg is
+ // ready to send, instead of this?
if (ccontrol->inflight < ccontrol->sendme_inc ||
100*ccontrol->inflight <=
conflux_params_get_drain_pct()*ccontrol->cwnd) {
return true;
}
- // TODO-329-TUNING: Should we try to switch if the prev_leg is
- // ready to send?
-
return false;
}
@@ -407,14 +409,6 @@ conflux_decide_circ_cwndrtt(const conflux_t *cfx)
return leg->circ;
}
- /* For any given leg, it has min_rtt/2 time before the 'primary'
- * leg's acks start arriving. So, the amount of data this
- * 'secondary' leg can send while the min_rtt leg transmits these
- * acks is:
- * (cwnd_leg/(leg_rtt/2))*min_rtt/2 = cwnd_leg*min_rtt/leg_rtt.
- * So any leg with available room below that is no good.
- */
-
leg = NULL;
CONFLUX_FOR_EACH_LEG_BEGIN(cfx, l) {
@@ -425,8 +419,7 @@ conflux_decide_circ_cwndrtt(const conflux_t *cfx)
/* Pick a 'min_leg' with the lowest RTT that still has
* room in the congestion window. Note that this works for
* min_leg itself, up to inflight. */
- if (cwnd_sendable(l->circ, min_rtt, l->circ_rtts_usec) <=
- cwnd_available(l->circ)) {
+ if (cwnd_sendable(l->circ, min_rtt, l->circ_rtts_usec) > 0) {
leg = l;
}
} CONFLUX_FOR_EACH_LEG_END(l);
@@ -484,9 +477,12 @@ conflux_decide_circ_for_send(conflux_t *cfx,
tor_assert(cfx->curr_leg);
if (new_circ != cfx->curr_leg->circ) {
- cfx->cells_until_switch =
- cwnd_sendable(new_circ,cfx->curr_leg->circ_rtts_usec,
- new_leg->circ_rtts_usec);
+ // TODO-329-TUNING: This is one mechanism to rate limit switching,
+ // which should reduce the OOQ mem. However, we're not going to do that
+ // until we get some data on if the memory usage is high
+ cfx->cells_until_switch = 0;
+ //cwnd_sendable(new_circ,cfx->curr_leg->circ_rtts_usec,
+ // new_leg->circ_rtts_usec);
conflux_validate_stream_lists(cfx);
@@ -559,13 +555,10 @@ conflux_pick_first_leg(conflux_t *cfx)
tor_assert(min_leg);
}
- // TODO-329-TUNING: Does this create an edge condition by getting blocked,
- // is it possible that we get full before this point and block?
- // Esp if we switch to a new circuit that is not ready to
- // send because it has unacked inflight data.... This might cause
- // stalls?
- // That is the thinking with this -1 here, but maybe it is not needed.
- cfx->cells_until_switch = circuit_ccontrol(min_leg->circ)->cwnd - 1;
+ // TODO-329-TUNING: We may want to initialize this to a cwnd, to
+ // minimize early switching?
+ //cfx->cells_until_switch = circuit_ccontrol(min_leg->circ)->cwnd;
+ cfx->cells_until_switch = 0;
cfx->curr_leg = min_leg;
}
--
To stop receiving notification emails like this one, please contact
the administrator of this repository.
_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits