[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[tor-commits] [orbot/master] removed privoxy source



commit a8fab5e851e1f9c082c4902132ee81c461bd11a1
Author: n8fr8 <nathan@xxxxxxxxxxx>
Date:   Fri Jul 6 14:53:01 2012 -0400

    removed privoxy source
---
 external/privoxy/AUTHORS                           |  116 -
 external/privoxy/ChangeLog                         |  717 --
 external/privoxy/GNUmakefile.in                    | 2156 -----
 external/privoxy/INSTALL                           |  173 -
 external/privoxy/LICENSE                           |  339 -
 external/privoxy/Makefile                          |  108 -
 external/privoxy/README                            |  280 -
 external/privoxy/acconfig.h                        |  495 --
 external/privoxy/actionlist.h                      |  306 -
 external/privoxy/actions.c                         | 2021 -----
 external/privoxy/actions.h                         |  187 -
 external/privoxy/amiga.c                           |  341 -
 external/privoxy/amiga.h                           |  176 -
 external/privoxy/cgi.c                             | 2987 -------
 external/privoxy/cgi.h                             |  289 -
 external/privoxy/cgiedit.c                         | 4924 -----------
 external/privoxy/cgiedit.h                         |  175 -
 external/privoxy/cgisimple.c                       | 2295 -----
 external/privoxy/cgisimple.h                       |  185 -
 external/privoxy/config                            | 1530 ----
 external/privoxy/config.guess                      | 1530 ----
 external/privoxy/config.orig                       | 1530 ----
 external/privoxy/config.sub                        | 1773 ----
 external/privoxy/configure.in                      | 1463 ---
 external/privoxy/cygwin.h                          |   80 -
 external/privoxy/deanimate.c                       |  554 --
 external/privoxy/deanimate.h                       |  126 -
 external/privoxy/default.action.master             | 2162 -----
 external/privoxy/default.filter                    | 1289 ---
 external/privoxy/doc/gpl.html                      |  560 --
 external/privoxy/doc/pcrs.3                        |  488 -
 external/privoxy/doc/source/authors.sgml           |   67 -
 external/privoxy/doc/source/buildsource.sgml       |  256 -
 external/privoxy/doc/source/config.sgml            |   36 -
 external/privoxy/doc/source/contacting.sgml        |  262 -
 external/privoxy/doc/source/copyright.sgml         |   47 -
 external/privoxy/doc/source/developer-manual.sgml  | 3304 -------
 external/privoxy/doc/source/faq.sgml               | 3454 --------
 external/privoxy/doc/source/history.sgml           |   71 -
 external/privoxy/doc/source/install.sgml           |  106 -
 external/privoxy/doc/source/ldp.dsl.in             |  420 -
 external/privoxy/doc/source/license.sgml           |   50 -
 external/privoxy/doc/source/newfeatures.sgml       |  156 -
 external/privoxy/doc/source/p-authors.sgml         |  159 -
 external/privoxy/doc/source/p-config.sgml          | 2756 ------
 external/privoxy/doc/source/privoxy-man-page.sgml  |  352 -
 external/privoxy/doc/source/privoxy.sgml           |   44 -
 external/privoxy/doc/source/readme.sgml            |  268 -
 external/privoxy/doc/source/seealso.sgml           |  113 -
 external/privoxy/doc/source/supported.sgml         |   46 -
 external/privoxy/doc/source/temp/manpage.refs      |    4 -
 external/privoxy/doc/source/user-manual.sgml       | 9328 --------------------
 external/privoxy/doc/source/webserver/index.sgml   |  372 -
 external/privoxy/doc/webserver/README.txt          |    9 -
 external/privoxy/doc/webserver/announce.txt        |  126 -
 .../doc/webserver/developer-manual/coding.html     | 2602 ------
 .../doc/webserver/developer-manual/contact.html    |  510 --
 .../doc/webserver/developer-manual/copyright.html  |  298 -
 .../doc/webserver/developer-manual/cvs.html        |  330 -
 .../webserver/developer-manual/documentation.html  |  944 --
 .../doc/webserver/developer-manual/index.html      |  688 --
 .../webserver/developer-manual/introduction.html   |  199 -
 .../doc/webserver/developer-manual/newrelease.html | 1956 ----
 .../doc/webserver/developer-manual/quickstart.html |  150 -
 .../doc/webserver/developer-manual/seealso.html    |  405 -
 .../doc/webserver/developer-manual/testing.html    |  259 -
 .../developer-manual/webserver-update.html         |  260 -
 .../privoxy/doc/webserver/faq/configuration.html   | 1797 ----
 external/privoxy/doc/webserver/faq/contact.html    |  510 --
 external/privoxy/doc/webserver/faq/copyright.html  |  301 -
 external/privoxy/doc/webserver/faq/general.html    | 1076 ---
 external/privoxy/doc/webserver/faq/index.html      |  999 ---
 .../privoxy/doc/webserver/faq/installation.html    |  569 --
 external/privoxy/doc/webserver/faq/misc.html       | 1745 ----
 external/privoxy/doc/webserver/faq/trouble.html    | 1276 ---
 .../privoxy/doc/webserver/images/files-in-use.jpg  |  Bin 16587 -> 0 bytes
 .../privoxy/doc/webserver/images/proxy_setup.jpg   |  Bin 33275 -> 0 bytes
 external/privoxy/doc/webserver/index.html          |  328 -
 .../doc/webserver/man-page/privoxy-man-page.html   |  294 -
 external/privoxy/doc/webserver/p_doc.css           |   66 -
 external/privoxy/doc/webserver/p_feedback.css      |    9 -
 external/privoxy/doc/webserver/privoxy-index.html  |  283 -
 external/privoxy/doc/webserver/privoxy.css         |   69 -
 external/privoxy/doc/webserver/robots.txt          |   17 -
 external/privoxy/doc/webserver/team/01stefanw.jpg  |  Bin 10327 -> 0 bytes
 .../privoxy/doc/webserver/team/01stefanw_t.jpg     |  Bin 1896 -> 0 bytes
 external/privoxy/doc/webserver/team/02jon.jpg      |  Bin 85888 -> 0 bytes
 external/privoxy/doc/webserver/team/02jon_t.jpg    |  Bin 2039 -> 0 bytes
 external/privoxy/doc/webserver/team/03andreas.jpg  |  Bin 42354 -> 0 bytes
 .../privoxy/doc/webserver/team/03andreas_t.jpg     |  Bin 1894 -> 0 bytes
 external/privoxy/doc/webserver/team/04rodney.jpg   |  Bin 57055 -> 0 bytes
 external/privoxy/doc/webserver/team/04rodney_t.jpg |  Bin 2138 -> 0 bytes
 external/privoxy/doc/webserver/team/05david.jpg    |  Bin 62834 -> 0 bytes
 external/privoxy/doc/webserver/team/05david_t.jpg  |  Bin 3950 -> 0 bytes
 external/privoxy/doc/webserver/team/05member.jpg   |  Bin 932 -> 0 bytes
 external/privoxy/doc/webserver/team/05member_t.jpg |  Bin 1049 -> 0 bytes
 external/privoxy/doc/webserver/team/06member.jpg   |  Bin 932 -> 0 bytes
 external/privoxy/doc/webserver/team/06member_t.jpg |  Bin 1049 -> 0 bytes
 external/privoxy/doc/webserver/team/07member.jpg   |  Bin 932 -> 0 bytes
 external/privoxy/doc/webserver/team/07member_t.jpg |  Bin 1049 -> 0 bytes
 external/privoxy/doc/webserver/team/08member.jpg   |  Bin 932 -> 0 bytes
 external/privoxy/doc/webserver/team/08member_t.jpg |  Bin 1049 -> 0 bytes
 external/privoxy/doc/webserver/team/20member.jpg   |  Bin 932 -> 0 bytes
 external/privoxy/doc/webserver/team/20member_t.jpg |  Bin 1049 -> 0 bytes
 external/privoxy/doc/webserver/team/index.html     |   26 -
 .../doc/webserver/user-manual/actions-file.html    | 8214 -----------------
 .../doc/webserver/user-manual/appendix.html        | 2187 -----
 .../privoxy/doc/webserver/user-manual/config.html  | 4121 ---------
 .../doc/webserver/user-manual/configuration.html   |  514 --
 .../privoxy/doc/webserver/user-manual/contact.html |  514 --
 .../doc/webserver/user-manual/copyright.html       |  424 -
 .../doc/webserver/user-manual/files-in-use.jpg     |  Bin 16587 -> 0 bytes
 .../doc/webserver/user-manual/filter-file.html     | 1652 ----
 .../privoxy/doc/webserver/user-manual/index.html   |  963 --
 .../doc/webserver/user-manual/installation.html    | 1082 ---
 .../doc/webserver/user-manual/introduction.html    |  292 -
 .../privoxy/doc/webserver/user-manual/proxy2.jpg   |  Bin 45431 -> 0 bytes
 .../doc/webserver/user-manual/proxy_setup.jpg      |  Bin 33275 -> 0 bytes
 .../doc/webserver/user-manual/quickstart.html      |  943 --
 .../privoxy/doc/webserver/user-manual/seealso.html |  418 -
 .../privoxy/doc/webserver/user-manual/startup.html |  902 --
 .../doc/webserver/user-manual/templates.html       |  321 -
 .../doc/webserver/user-manual/upgradersnote.html   |  296 -
 .../doc/webserver/user-manual/whatsnew.html        |  351 -
 external/privoxy/encode.c                          |  430 -
 external/privoxy/encode.h                          |   94 -
 external/privoxy/errlog.c                          | 1547 ----
 external/privoxy/errlog.h                          |  215 -
 external/privoxy/filters.c                         | 2709 ------
 external/privoxy/filters.h                         |  382 -
 external/privoxy/gateway.c                         | 1379 ---
 external/privoxy/gateway.h                         |  158 -
 external/privoxy/genclspec.sh                      |   55 -
 external/privoxy/icons/ico00001.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00002.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00003.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00004.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00005.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00006.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00007.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/ico00008.ico                |  Bin 318 -> 0 bytes
 external/privoxy/icons/idle.ico                    |  Bin 318 -> 0 bytes
 external/privoxy/icons/off.ico                     |  Bin 318 -> 0 bytes
 external/privoxy/icons/os2.ico                     |  Bin 2968 -> 0 bytes
 external/privoxy/icons/os20.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os21.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os22.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os23.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os24.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os25.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os26.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os27.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/os28.ico                    |  Bin 498 -> 0 bytes
 external/privoxy/icons/privoxy.ico                 |  Bin 318 -> 0 bytes
 external/privoxy/install-sh                        |  251 -
 external/privoxy/jbsockets.c                       | 1054 ---
 external/privoxy/jbsockets.h                       |  149 -
 external/privoxy/jcc.c                             | 4486 ----------
 external/privoxy/jcc.c.rej                         |   20 -
 external/privoxy/jcc.h                             |  261 -
 external/privoxy/list.c                            | 1229 ---
 external/privoxy/list.h                            |  181 -
 external/privoxy/loadcfg.c                         | 2041 -----
 external/privoxy/loadcfg.h                         |  199 -
 external/privoxy/loaders.c                         | 1762 ----
 external/privoxy/loaders.h                         |  250 -
 external/privoxy/match-all.action                  |   14 -
 external/privoxy/miscutil.c                        | 1907 ----
 external/privoxy/miscutil.h                        |  259 -
 external/privoxy/mkinstalldirs                     |   40 -
 external/privoxy/parsers.c                         | 4740 ----------
 external/privoxy/parsers.c.rej                     |   16 -
 external/privoxy/parsers.h                         |  323 -
 external/privoxy/pcre/Makefile.in                  |  219 -
 external/privoxy/pcre/RunTest.in                   |  148 -
 external/privoxy/pcre/chartables.c                 |  183 -
 external/privoxy/pcre/config.guess                 | 1121 ---
 external/privoxy/pcre/config.h                     |    5 -
 external/privoxy/pcre/config.in                    |   33 -
 external/privoxy/pcre/config.sub                   | 1232 ---
 external/privoxy/pcre/configure                    | 1568 ----
 external/privoxy/pcre/configure.in                 |   85 -
 external/privoxy/pcre/dftables                     |  Bin 22917 -> 0 bytes
 external/privoxy/pcre/dftables.c                   |  148 -
 external/privoxy/pcre/dll.mk                       |   60 -
 external/privoxy/pcre/doc/ChangeLog                |  655 --
 external/privoxy/pcre/doc/NON-UNIX-USE             |   50 -
 external/privoxy/pcre/doc/Tech.Notes               |  243 -
 external/privoxy/pcre/doc/authors                  |    6 -
 external/privoxy/pcre/doc/copying                  |   46 -
 external/privoxy/pcre/doc/news                     |   54 -
 external/privoxy/pcre/doc/pcre.3                   | 1810 ----
 external/privoxy/pcre/doc/pcre.html                | 2397 -----
 external/privoxy/pcre/doc/pcre.txt                 | 2125 -----
 external/privoxy/pcre/doc/pcregrep.1               |   76 -
 external/privoxy/pcre/doc/pcregrep.html            |  105 -
 external/privoxy/pcre/doc/pcregrep.txt             |   87 -
 external/privoxy/pcre/doc/pcreposix.3              |  149 -
 external/privoxy/pcre/doc/pcreposix.html           |  191 -
 external/privoxy/pcre/doc/pcreposix.txt            |  159 -
 external/privoxy/pcre/doc/pcretest.txt             |  246 -
 external/privoxy/pcre/doc/perltest.txt             |   29 -
 external/privoxy/pcre/doc/readme                   |  270 -
 external/privoxy/pcre/get.c                        |  227 -
 external/privoxy/pcre/install                      |  185 -
 external/privoxy/pcre/install-sh                   |  251 -
 external/privoxy/pcre/internal.h                   |  381 -
 external/privoxy/pcre/licence                      |   46 -
 external/privoxy/pcre/ltconfig                     | 3078 -------
 external/privoxy/pcre/ltmain.sh                    | 4012 ---------
 external/privoxy/pcre/maketables.c                 |  132 -
 external/privoxy/pcre/pcre-config                  |   59 -
 external/privoxy/pcre/pcre-config.in               |   59 -
 external/privoxy/pcre/pcre.c                       | 5151 -----------
 external/privoxy/pcre/pcre.def                     |   19 -
 external/privoxy/pcre/pcre.h                       |  110 -
 external/privoxy/pcre/pcre.in                      |  110 -
 external/privoxy/pcre/pcregrep.c                   |  228 -
 external/privoxy/pcre/pcreposix.c                  |  280 -
 external/privoxy/pcre/pcreposix.h                  |   88 -
 external/privoxy/pcre/pcretest.c                   | 1225 ---
 external/privoxy/pcre/study.c                      |  397 -
 external/privoxy/pcre/vc_dftables.dsp              |  296 -
 external/privoxy/pcrs.c                            | 1317 ---
 external/privoxy/pcrs.h                            |  221 -
 external/privoxy/privoxy-generic.init              |  182 -
 external/privoxy/privoxy-rh.spec                   | 1196 ---
 external/privoxy/privoxy-suse.spec                 |  556 --
 external/privoxy/privoxy.1                         |  216 -
 external/privoxy/privoxy.init                      |  276 -
 external/privoxy/privoxy.init.suse                 |  127 -
 external/privoxy/privoxy.logrotate                 |  107 -
 external/privoxy/project.h                         | 1885 ----
 external/privoxy/regression-tests.action           |  782 --
 external/privoxy/slackware/rc.privoxy.orig         |  109 -
 external/privoxy/ssplit.c                          |  218 -
 external/privoxy/ssplit.h                          |   84 -
 external/privoxy/strptime.h                        | 1003 ---
 external/privoxy/templates/blocked                 |  287 -
 external/privoxy/templates/cgi-error-404           |  149 -
 external/privoxy/templates/cgi-error-bad-param     |  156 -
 external/privoxy/templates/cgi-error-disabled      |  169 -
 external/privoxy/templates/cgi-error-file          |  139 -
 .../privoxy/templates/cgi-error-file-read-only     |  146 -
 external/privoxy/templates/cgi-error-modified      |  157 -
 external/privoxy/templates/cgi-error-parse         |  176 -
 external/privoxy/templates/cgi-style.css           |  173 -
 external/privoxy/templates/connect-failed          |  156 -
 external/privoxy/templates/default                 |  131 -
 .../privoxy/templates/edit-actions-add-url-form    |  216 -
 external/privoxy/templates/edit-actions-for-url    | 1425 ---
 .../privoxy/templates/edit-actions-for-url-filter  |   40 -
 external/privoxy/templates/edit-actions-list       |  412 -
 .../privoxy/templates/edit-actions-list-button     |   49 -
 .../privoxy/templates/edit-actions-list-section    |  125 -
 external/privoxy/templates/edit-actions-list-url   |   95 -
 .../privoxy/templates/edit-actions-remove-url-form |  196 -
 external/privoxy/templates/edit-actions-url-form   |  219 -
 external/privoxy/templates/forwarding-failed       |  167 -
 external/privoxy/templates/mod-local-help          |   12 -
 external/privoxy/templates/mod-support-and-service |   61 -
 external/privoxy/templates/mod-title               |    4 -
 external/privoxy/templates/mod-unstable-warning    |    7 -
 external/privoxy/templates/no-such-domain          |  158 -
 external/privoxy/templates/show-request            |  154 -
 external/privoxy/templates/show-status             |  343 -
 external/privoxy/templates/show-status-file        |  146 -
 external/privoxy/templates/show-url-info           |  340 -
 external/privoxy/templates/show-version            |  159 -
 external/privoxy/templates/toggle                  |  180 -
 external/privoxy/templates/toggle-mini             |   91 -
 external/privoxy/templates/untrusted               |  191 -
 external/privoxy/templates/url-info-osd.xml        |   14 -
 external/privoxy/tools/privoxy-log-parser.pl       | 2064 -----
 external/privoxy/tools/privoxy-regression-test.pl  | 1754 ----
 external/privoxy/tools/url-pattern-translator.pl   |  139 -
 external/privoxy/trust                             |   85 -
 external/privoxy/urlmatch.c                        | 1452 ---
 external/privoxy/urlmatch.h                        |  136 -
 external/privoxy/user.action                       |  169 -
 external/privoxy/user.filter                       |   75 -
 external/privoxy/utils/changelog2doc.pl            |   66 -
 external/privoxy/utils/docbook2man/COPYING         |  340 -
 .../privoxy/utils/docbook2man/docbook2man-spec.pl  | 1229 ---
 .../utils/docbook2man/docbook2man-spec.pl.1        |   99 -
 external/privoxy/utils/filter2docs.pl              |   81 -
 external/privoxy/utils/ldp_print/README            |   80 -
 external/privoxy/utils/ldp_print/VERSION           |    1 -
 .../privoxy/utils/ldp_print/fix_print_html.lib     |  227 -
 external/privoxy/utils/ldp_print/ldp_print         |   72 -
 external/privoxy/utils/prepare-configfile.pl       |   50 -
 external/privoxy/vc_config_pthreads.h              |  484 -
 external/privoxy/vc_config_winthreads.h            |  675 --
 external/privoxy/vc_console.dsp                    |  405 -
 external/privoxy/vc_privoxy.dsp                    |  488 -
 external/privoxy/vc_privoxy.dsw                    |   59 -
 external/privoxy/w32.rc                            |  343 -
 external/privoxy/w32log.c                          | 1480 ----
 external/privoxy/w32log.h                          |  181 -
 external/privoxy/w32res.h                          |  194 -
 external/privoxy/w32svrapi.c                       |  952 --
 external/privoxy/w32svrapi.h                       |  146 -
 external/privoxy/w32taskbar.c                      |  313 -
 external/privoxy/w32taskbar.h                      |   82 -
 external/privoxy/win32.c                           |  366 -
 external/privoxy/win32.h                           |   94 -
 306 files changed, 0 insertions(+), 179609 deletions(-)

diff --git a/external/privoxy/AUTHORS b/external/privoxy/AUTHORS
deleted file mode 100644
index 3f8a609..0000000
--- a/external/privoxy/AUTHORS
+++ /dev/null
@@ -1,116 +0,0 @@
-              Authors of Privoxy v2.9.x and 3.x
-===========================================================================
-
-Current Privoxy Team:
-
- Fabian Keil, lead developer
- David Schmidt, developer
-
- Hal Burgiss
- Mark Miller
- Gerry Murphy
- Lee Rian
- Roland Rosenfeld
- Jörg Strohmayer
-
-Former Privoxy Team Members:
-
- Johny Agotnes
- Rodrigo Barbosa
- Moritz Barsnick
- Ian Cummings
- Brian Dessent
- Jon Foster
- Karsten Hopp
- Alexander Lazic
- Daniel Leite
- Gábor Lipták
- Adam Lock
- Guy Laroche
- Justin McMurtry
- Andreas Oesterhelt
- Haroon Rafique
- Georg Sauthoff
- Thomas Steudten
- Rodney Stromlund
- Sviatoslav Sviridov
- Sarantis Paskalis
- Stefan Waldherr
-
-Thanks to the many people who have tested Privoxy, reported bugs, provided
-patches, made suggestions or contributed in some way. These include (in
-alphabetical order):
-
- Ken Arromdee
- Devin Bayer
- Gergely Bor
- Reiner Buehl
- Andrew J. Caines
- Clifford Caoile
- Frédéric Crozat
- Michael T. Davis
- Mattes Dolak
- Matthias Drochner
- Peter E.
- Florian Effenberger
- Markus Elfring
- Dean Gaudet
- Stephen Gildea
- Daniel Griscom
- Felix Gröbert
- Aaron Hamid
- Darel Henman
- Magnus Holmgren
- Eric M. Hopper
- Ralf Horstmann
- Stefan Huehner 
- Peter Hyman
- Derek Jennings
- Petr Kadlec
- David Laight
- Bert van Leeuwen
- Don Libes
- Paul Lieverse
- Toby Lyward
- Wil Mahan
- Jindrich Makovicka
- David Mediavilla
- Raphael Moll
- Amuro Namie
- Adam Piggott
- Dan Price
- Roberto Ragusa
- Félix Rauch
- Maynard Riley
- Chung-chieh Shan
- Spinor S.
- Bart Schelstraete
- Oliver Stoeneberg
- Peter Thoenen
- Martin Thomas
- Bobby G. Vinyard
- Jochen Voss
- Glenn Washburn
- Song Weijia
- Jörg Weinmann
- Darren Wiebe
- Anduin Withers
- Oliver Yeoh
- Jamie Zawinski
-
-Privoxy is based in part on code originally developed by Junkbusters Corp. and
-Anonymous Coders.
-
-Privoxy heavily relies on Philip Hazel's PCRE.
-
-The code to filter compressed content makes use of zlib which is written by
-Jean-loup Gailly and Mark Adler.
-
-On systems that lack snprintf(), Privoxy is using a version written by Mark
-Martinec. On systems that lack strptime(), Privoxy is using the one from the
-GNU C Library written by Ulrich Drepper.
-
-If we've missed you off this list, please let us know!
-
- Privoxy team. http://www.privoxy.org/
- <ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx>
diff --git a/external/privoxy/ChangeLog b/external/privoxy/ChangeLog
deleted file mode 100644
index 54cc625..0000000
--- a/external/privoxy/ChangeLog
+++ /dev/null
@@ -1,717 +0,0 @@
---------------------------------------------------------------------
-ChangeLog for Privoxy
---------------------------------------------------------------------
-*** Version 3.0.12 (UNRELEASED) ***
-
-- The socket-timeout option now also works on platforms whose
-  select() implementation modifies the timeout structure.
-  Previously the timeout was triggered even if the connection
-  didn't stall. Reported by cyberpatrol.
-- The Connection: keep-alive code properly deals with files
-  larger than 2GB. Previously the connection was closed too
-  early.
-- The content length for files above 2GB is logged correctly.
-- The user-manual directive on the show-status page links to
-  the documentation location specified with the directive,
-  not to the Privoxy website.
-- When running in daemon mode, Privoxy doesn't log anything
-  to the console unless there are errors before the logfile
-  has been opened.
-- The show-status page prints warnings about invalid directives
-  on the same line as the directives themselves.
-- Fixed several justified (but harmless) compiler warnings,
-  mostly on 64 bit platforms.
-- The mingw32 version explicitly requests the default charset
-  to prevent display problems with some fonts available on more
-  recent Windows versions. Patch by Burberry.
-- The mingw32 version uses the Privoxy icon in the alt-tab
-  windows. Patch by Burberry.
-- The timestamp and the thread id is omitted in the "Fatal error"
-  message box on mingw32.
-- Fixed two related mingw32-only buffer overflows. Triggering
-  them required control over the configuration file, therefore
-  this isn't seen as a security issue.
-- In verbose mode, or if the new option --show-skipped-tests
-  is used, Privoxy-Regression-Test logs skipped tests and the
-  skip reason.
-
-*** Version 3.0.11 ***
-	
-- On most platforms, outgoing connections can be kept alive and
-  reused if the server supports it. Whether or not this improves
-  things depends on the connection.
-- When dropping privileges, membership in supplementary groups
-  is given up as well. Not doing that can lead to Privoxy running
-  with more rights than necessary and violates the principle of
-  least privilege. Users of the --user option are advised to update.
-  Thanks to Matthias Drochner for reporting the problem,
-  providing the initial patch and testing the final version.
-- Passing invalid users or groups with the --user option
-  didn't lead to program exit. Regression introduced in 3.0.7.
-- The match all section has been moved from default.action
-  to a new file called match-all.action. As a result the
-  default.action no longer needs to be touched by the user
-  and can be safely overwritten by updates.
-- The standard.action file has been removed. Its content
-  is now part of the default.action file.
-- In some situations the logged content length was slightly too low.
-- Crunched requests are logged with their own log level.
-  If you used "debug 1" in the past, you'll probably want
-  to additionally enable "debug 1024", otherwise only passed
-  requests will be logged. If you only care about crunched
-  requests, simply replace "debug 1" with "debug 1024".
-- The crunch reason has been moved to the beginning of the
-  crunch message. For HTTP URLs, the protocol is logged as well.
-- Log messages are shortened by printing the thread id on its
-  own (as opposed to putting it inside the string "Privoxy()").
-- The config option socket-timeout has been added to control
-  the time Privoxy waits for data to arrive on a socket.
-- Support for remote toggling is controlled by the configure
-  option --disable-toggle only. In previous versions it also
-  depended on the action editor and thus configuring with the
-  --disable-editor option would disable remote toggling support
-  as well.
-- Requests with invalid HTTP versions are rejected.
-- The template symbol @date@ can be used to include a date(1)-like
-  time string. Initial patch submitted by Endre Szabo.
-- Responses from shoutcast servers are accepted again.
-  Problem reported and fix suggested by Stefan.
-- The hide-forwarded-for-headers action has been replaced with
-  the change-x-forwarded-for{} action which can also be used to
-  add X-Forwarded-For headers. The latter functionality already
-  existed in Privoxy versions prior to 3.0.7 but has been removed
-  as it was often used unintentionally (by not using the
-  hide-forwarded-for-headers action).
-- A "clear log" view option was added to the mingw32 version
-  to clear out all of the lines in the Privoxy log window.
-  Based on a patch submitted by T Ford.
-- The mingw32 version uses "critical sections" now, which prevents
-  log message corruption under load. As a side effect, the
-  "no thread-safe PRNG" warning could be removed as well.
-- The mingw32 version's task bar icon is crossed out and
-  the color changed to gray if Privoxy is toggled off.
-
-*** Version 3.0.10 ***
-
-- Ordinary configuration file changes no longer cause program
-  termination on OS/2 if the name of the logfile hasn't been
-  changed as well. This regression probably crept in with the
-  logging improvements in 3.0.7. Reported by Maynard.
-- The img-reorder filter is less likely to mess up JavaScript code in
-  img tags. Problem and solution reported by Glenn Washburn in #2014552.
-- The source tar ball now includes Privoxy-Log-Parser,
-  a syntax-highlighter for Privoxy logs. For fancy screenshots see:
-  http://www.fabiankeil.de/sourcecode/privoxy-log-parser/
-  Documentation is available through perldoc(1).
-
-*** Version 3.0.9 Beta ***
-
-- Added SOCKS5 support (with address resolution done by
-  the SOCKS5 server). Patch provided by Eric M. Hopper.
-- The "blocked" CGI pages include a block reason that was
-  provided as argument to the last-applying block action.
-- If enable-edit-actions is disabled (the default since 3.0.7 beta)
-  the show-status page hides the edit buttons and explains why.
-  Previously the user would get the "this feature has been disabled"
-  message after using the edit button.
-- Forbidden CONNECT requests are treated like blocks by default.
-  The now-pointless treat-forbidden-connects-like-blocks action
-  has been removed.
-- Not enabling limit-connect now allows CONNECT requests to all ports.
-  In previous versions it would only allow CONNECT requests to port 443.
-  Use +limit-connect{443} if you think you need the old default behaviour.
-- The CGI editor gets turned off after three edit requests with invalid
-  file modification timestamps. This makes life harder for attackers
-  who can leverage browser bugs to send fake Referers and intend to
-  brute-force edit URLs.
-- Action settings for multiple patterns in the same section are
-  shared in memory. As a result these sections take up less space
-  (and are loaded slightly faster). Problem reported by Franz Schwartau.
-- Linear white space in HTTP headers will be normalized to single
-  spaces before parsing the header's content, headers split across
-  multiple lines get merged first. This should prevent problems like:
-   * letting the session-cookies-only action slip
-     some Cookies through unmodified,
-   * only suppressing the first line of a header,
-     thus creating an invalid one, and
-   * to incorrectly block headers with valid timestamps
-     that weren't properly recognized.
-  Headers that could trigger these problems are unlikely to appear
-  in "normal" web traffic, but could be intentionally generated to
-  fool some of Privoxy's header parsers.
-- Host information is gathered outside the main thread so it's less
-  likely to delay other incoming connections if the host is misconfigured.
-- New config option "hostname" to use a hostname other than
-  the one returned by the operating system. Useful to speed-up responses
-  for CGI requests on misconfigured systems. Requested by Max Khon.
-- The CGI editor supports the "disable all filters of this type"
-  directives "-client-header-filter", "-server-header-filter",
-  "-client-header-tagger" and "-server-header-tagger".
-- Fixed false-positives with the link-by-url filter and URLs that
-  contain the pattern "/jump/".
-- The less-download-windows filter no longer messes
-  "Content-Type: application/x-shockwave-flash" headers up.
-- In the show-url-info page's "Final results" section active and
-  inactive actions are listed separately. Patch provided by Lee.
-- The GNUmakefile supports the DESTDIR variable. Patch for
-  the install target submitted by Radoslaw Zielinski.
-- Embedding the content of configuration files in the show-status
-  page is significantly faster now. For a largish action file (1 MB)
-  a speedup of about 2450 times has been measured. This is mostly
-  interesting if you are using large action files or regularly use
-  Privoxy-Regression-Test while running Privoxy through Valgrind,
-  for stock configuration files it doesn't really matter.
-- If zlib support is unavailable and there are content
-  filters active but the prevent-compression action is disabled,
-  the show-url-info page includes a warning that compression
-  might prevent filtering.
-- The show-url-info page provides an OpenSearch Description that
-  allows to access the page through browser search plugins.
-- Custom client-header filters that rewrite the request line
-  incorrectly no longer cause Privoxy to crash. Reported by din_a4.
-- The obsolete kill-popups action has been removed as the
-  PCRS-based popup filters can do the same and are slightly
-  less unreliable.
-- The inspect-jpegs action has been removed.
-- The send-wafer and send-vanilla-wafer actions have been removed.
-  They weren't particular useful and their behaviour could be emulated
-  with add-header anyway.
-- Privoxy-Regression-Test has been significantly improved.
-- Most sections in the default.action file contain tests for
-  Privoxy-Regression-Test to verify that they are working as intended.
-- Parts of Privoxy have been refactored to increase maintainability.
-- Building with zlib (if available) is done by default.
-
-*** Version 3.0.8 ***
-
-- Fixed a small memory leak when listen-address only specifies the port.
-- The source tar balls now include Privoxy-Regression-Test which
-  (upon other things) can be used to automatically detect some
-  packaging problems. Packagers are welcome to give it a try.
-- Reverted a change in 3.0.7 that caused path patterns to be checked
-  even if the host pattern match already failed. While this doesn't
-  noticeable affect the performance, it makes it less likely to run
-  out of stack space with overly-complex path patterns the user might
-  have added.
-- Updated the msn, yahoo and google filters to work as advertised again.
-- The warning message shown by the show-status CGI page is easier to
-  understand. Previously it wasn't clear that the error message
-  is shown below the invalid directive. (Reported by Lee)
-- When regenerating Content-Disposition headers the more common
-  spelling is used for the name. Previously it was written without caps.
-- Less confusing log message if the content type isn't overwritten
-  because force-text-type wasn't used but the old type doesn't look
-  like content that would be filtered normally.
-- Better log messages if the user tries to execute filters that
-  don't exist.
-- Treat the non-standard Request-Range headers like standard range
-  headers and suppress them if content filtering is enabled.
-- Prevent the log messages for CONNECT requests to unacceptable
-  ports from printing the limit-connect argument as [null] if
-  limit-connect hasn't been explicitly enabled.
-- Don't disable the mingw32 log window if the logfile directive
-  isn't used. While it was an intentional change in 3.0.7 at least
-  one user perceived it as a regression and the same effect can
-  be achieved by disabling all debug directives.
-- Fixed two minor problems related to the win32 build process: a css
-  file was not being in the installer and the trustfile comment in the
-  config.txt referenced a nonexisting file
-- Minor documentation fixes.
-
-*** Version 3.0.7 Beta ***
-
-- Added zlib support to filter content with gzip and deflate
-  encoding. (Patch provided by Wil Mahan)
-- Dedicated filters and actions are used for header filtering.
-  "filter-client-headers" and "filter-client-headers" are no longer
-  supported, use server-header-filter{} and client-header-filter{}
-  instead.
-- Tags can be used to change actions based on HTTP headers.
-- New server-header filter: less-download-windows.
-- New client-header taggers: css-requests, image-requests,
-  client-ip-address, http-method, allow-post, complete-url,
-  user-agent and privoxy-control.
-- New server-header taggers: content-type and privoxy-control.
-- The forward-override{} action allows to change the forwarding
-  settings through the action files, for example based on client
-  headers like the User-Agent, or the request origin.
-- Socks errors are no longer handled by the CGI page for
-  DNS resolution failures.
-- CGI pages use favicons to signal whether they are error
-  or control pages. This is useful if you rely heavily on
-  browser tabs.
-- The show-url-info CGI page shows the forwarding settings.
-- "Crunch!" log messages (used when Privoxy answers requests
-  by itself) now also contain the reason.
-- Allow to rewrite the request destination behind the client's back.
-- Fix socks requests on big-endian platforms. Patch provided by Song Weijia.
-- Fixes possible deadlocks and crashes on OpenBSD.
-  Patch provided by Ralf Horstmann.
-- The CGI action editor allows to edit actionfiles with previously
-  forbidden characters like dots.
-- New trust entries are saved with a comment that contains the
-  trusted referring URL (Suggested by Daniel Griscom).
-- Filter descriptions are HTML encoded automatically. 	
-- New config option "split-large-forms" to work
-  around a browser bug that caused IE6 and IE7 to ignore
-  the Submit button on the edit-actions-for-url CGI page.
-- New config option "allow-cgi-request-crunching" to allow
-  requests for Privoxy's CGI pages to be blocked, redirected
-  or (un)trusted like ordinary requests.
-- Empty filter files no longer interrupt the filtering process
-  prematurely and are correctly listed on the show-status CGI page.
-- New config option "accept-intercepted-requests" to combine
-  Privoxy with any packet filter to build an intercepting proxy
-  for HTTP/1.1 requests (and for HTTP/1.0 requests with Host header set).
-- fast-redirects{} catch redirects to https URLs as well.
-- redirect{s@foo@bar@} can be used to redirect to a rewritten
-  version of the original URL.
-- Trap unsupported gopher proxy requests.
-- Fixed a bug in the User Manual delivery on Windows
-  (mingw32 only). Images now show up correctly and HTML
-  pages are no longer padded with garbage data.
-- Fixed several minor memory leaks, most of them discovered with Valgrind.
-- Only unlink the pidfile if it's actually used.
-- Retries after connection problems with forced requests
-  aren't blocked again.
-- On Unix SIGABRT causes a core dump as expected and is no
-  longer treated as normal shutdown signal.
-- The "access denied" CGI page is more descriptive and
-  allows retries to circumvent the referrer check.
-- Updated PCRS to handle unexpected PCRE errors properly.
-  Fixed crashes that could occur if Privoxy was build
-  with external PCRE versions newer than Privoxy's internal
-  one. (Reported by Chung-chieh Shan)
-- Fixed crashes with null bytes in PCRS replacement strings
-  (Patch provided by Felix Gröbert).
-- Fixed crashes with header time randomization on mingw32.
-- The CGI style sheet is no longer delivered if the referring
-  page isn't a Privoxy CGI page. This prevents a JavaScript-based
-  Privoxy detection "attack". Note that detecting Privoxy is
-  still possible through other ways and Privoxy was never intended
-  to be invisible anyway.
-- Added support for AmigaOS 4, fixed build for AmigaOS 3.x.	
-- The show-url-info CGI page displays a warning if Privoxy
-  is currently toggled off.
-- The show-status CGI page suppresses the edit button
-  for action files if Privoxy has no write access.	
-- Most CGI error pages react properly to HEAD requests.
-- Requests with RFC 3253 HTTP methods (used by Subversion)
-  are accepted. (Patch provided by Petr Kadlec)
-- New config option "templdir" to change the location
-  of the CGI templates to make sure customized templates
-  aren't "updated".
-- Better handling of "HTTP/1.1 100 Continue" responses.
-- The background of the PNG pattern is transparent.
-- Fixed XML syntax errors caused by banners-by-size and banners-by-url.
-- Fixed crashes and possible action file corruptions
-  when lines containing hashes are written through the CGI editor.
-- Supports dynamic filters which can contain variables.
-- Supports tags to change the actions based on client or server headers.
-- Incorrect actions are logged before program termination.
-- The "actionsfile" syntax in the configuration file is consistent
-  with the rest of the configuration options and requires the
-  whole file name. This is an incompatible change, if you use
-  an old configuration file you might have to append ".action"
-  to your "actionsfile" directives.
-- With the configuration file option "enforce-blocks" the
-  "go there anyway" mechanism can be disabled without recompiling
-  Privoxy.
-- More precise error messages in case of incorrect acl syntax.
-- Logs a warning if filtering is enabled but impossible due
-  to lack of zlib support or use of the prevent-compression action.
-- Less noisy handling of Cookie:" and "Connection:" headers.
-- Improved error messages in case of connection problems.
-- Fix a command-line-parsing bug that was introduced before 3.0.5
-  beta and caused Privoxy to treat the last argument as configuration
-  file if no configuration file was specified.
-- Treat unknown command line options as fatal errors instead
-  of silently ignoring them.
-- Use string functions with length checks more often.
-- Don't log CONNECT requests twice.
-- Allow to log the source address for ACL-related connection drops.
-- Don't ignore applying filters if the server didn't
-  specify a Content-Type. Bug reported by Amuro Namie.
-- Rejected CONNECT requests are logged with log level info
-  (enabled by default) and the reason for the block.
-- New command line option "--pre-chroot-nslookup hostname" to
-  intialize the resolver library before chroot'ing. On some systems this
-  reduces the number of files that must be copied into the chroot tree.
-  (Patch provided by Stephen Gildea)
-- Fix a long-standing memory corruption bug that could cause
-  Privoxy to overwrite a single byte in memory it didn't explicitly
-  allocate (but that probably was allocated anyway due to bucket size).
-- Send template-based CGI pages as HTTP/1.1 unless the client
-  asked for HTTP/1.0.
-- Let the first line in connection established responses
-  end in \r\n as required by RFC1945. Reported by Bert van Leeuwen.
-- If no log file has been specified, disable logging instead of logging
-  to stderr.
-- Don't block stderr when in daemon mode.
-- Ignore missing zero-chunks when filtering chunk-encoded content.
-  Earlier Privoxy versions would buffer and then forward the content
-  unmodified which caused some browsers to simply show empty pages.
-- Fix double free in cgi_edit_actions_list(). Reported by Venustech AD-LAB.
-- The code to add X-Forwarded-For headers when the hide-forwarded-for-headers
-  action isn't being used has been removed.
-- Fixed trustfile feature which previously didn't work without FEATURE_TOGGLE.
-  Reported by Lee.
-- Minor code clean-ups, filter and action file updates.
-  (Some of them reported by Davide Alberani, Markus Elfring,
-   Stefan Huehner and Adam Piggott)
-
-*** Version 3.0.6 ***
-
-- New content filters: no-ping, google, msn, yahoo and blogspot.
-- New header filters:  x-httpd-php-to-html, html-to-xml, xml-to-html
-                       and hide-tor-exit-notation.
-- The special header "X-Filter: No" now disables header filtering as well.
-- Improved the filters img-reorder, js-annoyances, webbugs,
-  banners-by-size, banners-by-link and ie-exploits to make them
-  less likely to break anything.
-- Removed outdated URL patterns in default.action and added new ones. 
-- Added redirection from http://p.p/user-manual to http://p.p/user-manual/
-- Changed webinterface default values for hide-user-agent, hide-referrer
-  and set-image-blocker.
-	
-*** Version 3.0.5 Beta ***
-
-- Windows version can be installed/started as a service.
-- Windows icon stays blue when Privoxy is idle, green when busy.
-- Integrated Fabian Keil's extensive patch.  See:
-  http://www.fabiankeil.de/sourcecode/privoxy/. Includes the 
-  following new or significantly improved actions (among many 
-  other improvements):
-
-     content-type-overwrite{}
-     crunch-client-header{string}
-     crunch-if-none-match
-     crunch-server-header{string}
-     fast-redirects{check-decoded-url}
-     filter-client-headers
-     filter-server-headers
-     force-text-mode
-     handle-as-empty-document
-     hide-accept-language{}
-     hide-content-disposition{}
-     hide-if-modified-since
-     hide-referrer{conditional-block}
-     overwrite-last-modified{}
-     redirect{URL}
-     treat-forbidden-connects-like-blocks
-
-- Standard-compliant clients are prevented from displaying cached
-  copies of Privoxy's error messages after the cause of the problem
-  has gone.
-- Improved DNS error handling.
-- Multiple filter files can now be specified in config.
-- Added jpeg filtering to defend against MS jpeg vulnerability MS04-028
-  with the new inspect-jpegs action.
-- Removed the "arbitrary" 1000 filter limit - addresses tracker #911950
-- Thanks to Jindrich Makovicka for a race condition fix for the log 
-  file.  The race condition remains for non-pthread implementations.
-  Reference patch #1175720. Various other logging enhancements.
-- A pile of assorted bug fixes, memory leaks, enhancements, etc.
-- Moved Actions file reporting mechanism to SF tracker.
-- Two new options for config: enable-remote-http-toggle and 
-  forwarded-connect-retries.
-- Trap unsupported FTP requests.
-- Let text/xml be filtered.
-- Numerous updates to default.action
-- Increase the compiled in limit of trusted referrers from 64 to 512 
-  (for trustfile users).
-
-*** Version 3.0.3 ***
-
-- Fixed yet another two memory leaks. Process growth seems stopped now.
-- Further tightened security against malicious toggle-off links.
-- Excluded text/plain MIME types from filtering. This fixes a
-  couple of client-crashing, download corruption and
-  Privoxy performance issues, whose root cause lies in
-  web servers labelling content of unknown type as text/plain.
-- Assorted fixes for POSIX compliance, signal handling, graceful
-  termination, compiler warnings, OSX support, Win32 systray,
-  error logging, hostname wildcards, correct detection of NetBSD.
-- Workarounds for client (iTunes etc) and server (PHP < 4.2.3) bugs
-  including the notorious "blank page" problem.
-- Various filter improvements; most notably the unsolicited-popups
-  filter became less destructive     
-- Major revamp of the actions file
-	
-*** Version 3.0.2 ***
-
-- Fixed two memory leaks, one serious
-- Fixed bug in pcrs which could cause crashes with user-defined filters
-- Fixed bug in domain name matching
-- Assorted small fixes (Win32 menu, CGI URL editor, ..) 
-- Added basic support for the OPTIONS and TRACE http methods
-- Added workaround for Bug in Mac OSX that made Privoxy crash occasionally
-- Refined the default action file through >400 items of user feedback
-- Filter changes:
-  - Assorted refinements, optimizations and fixes in the js-annoyances,
-    img-reorder, banners-by-size, banners-by-link, webbugs, refresh-tags,
-    html-annoyances, content-cookies and fun filters
-  - Replaced filter "popups" by choice between two modes:
-    - "unsolicited-popups" tries to catch only the unsolicited ones
-    - "all-popups" tries to kill them all (as before)
-  - New filter "tiny-textforms" Help those tiny or hard-wrap textareas. 
-  - New filter "jumping-windows" that prevents windows from resizing
-    and moving themselves
-  - New filter "demoronizer" which fixes MS's abuse of std charsets
-    (common cases anyway).
-  - Replaced "nimda" with more general "ie-exploits" filter in which
-    all filters for exploits shall be collected
-- Improved cookie logging
-- Rewrote make install target. Added uninstall and install-strip
-  targets.
-- Fixed a potential (application-level, NOT OS-level!) security
-  problem involving remote toggling and action file manipulation
-  by mailicious websites.
-- Added ability to chroot (thanks to Sviatoslav Sviridov)
-- Added more action aliases for prehistoric action names
-- Add Slackware support to Makefile.
-
-*** Version 3.0  ***
-
-- Fixed Windows startmenu items, log window and tray icon menus.
-- Added warning for bogus install target
-- Added quicktime-kioskmode filter and improved frameset-borders
-- Updated default.action based on latest feedback
-- New PDF doc build process
-- Add a user contrib module to cvs: 
-  http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/contrib/
-
-*** Version 2.9.18  ***
-
-- Added workaround for IE bug that broke CGI interface
-- Bugfix: String actions now reliably editable through CGI interface
-- Three filters fixed (again!)
-- Assorted small fixes and doc enhancements
-
-*** Version 2.9.16  *** 
-
-- Major revamp of default.action to get rid of years of cruft.
-- Same for default.filter
-- Re-design and major improvements to the CGI editor interface.
-- Address spurious 'out of memory' error due to incorrect file permissions.
-- Impose buffer limits while reading client and server headers.
-- Better memory and CPU optimization.
-- Add Conectiva Linux package.
-- user-manual directive added to config for help links from within CGI
-  editor.
-- Multiple actions files can now be specified in config.
-- Actions files are changed to: default.action, standard.action, and 
-  user.action. user.action is for personal/local configuration.
-- The usual many small and miscellaneous bug and security fixes.
-
-*** Version 2.9.14 Beta *** 
-
-- Fix Solaris compile problem (gateway.h and filters.h)
-- Makefile fixes for Solaris, FreeBSD (?)
-- Fix build failure where certain features were disabled.
-- 'blocked-compact' template is removed. Various CGI improvements,
-  including an adaptive 'blocked' template.
-- Various tweaks for actions file to get ready for stable 3.0
-- Included a 'Bookmarklet' and PHP scripts for reporting actions file
-  problems via web interface at privoxy.org. Accessed via internal CGIs.
-- Include cgi-style.css for templates.
-- #include mechansim for common text in templates
-- Various other minor fixes.
-
-*** Version 2.9.13 Beta *** 
-
-- *NEWS*: The project has been renamed to Privoxy! The new name is 
-  reflected throughout (file locations, etc).
-- ijb.action is now default.action. re_filterfile is now 
-  default.filter.
-- http://i.j.b/ is now http://p.p/
-- The 'logo' option for replacing ad iamges is removed now. 'Pattern' 
-  (checkerboard) is now the default.
-- RPM spec file make over.
-
-
-*** Version 2.9.12 Beta *** 
-
-- **READ**: The default listening PORT is NOW 8118!!! Changed from 
-  8000 due to conflict with NAS (Network Audio Server, whatever that 
-  is.)
-- More CGI actions editor fixes and improvements.
-- Win32 command line fix ups.
-- re_filterfile now has modular sections that can be activated on a 
-  per site basis. Some new goodies there too.
-- +filter now takes arguments to match FILTER sections in re_filterfile
-  for even more flexibility. 
-- Added a new image blocker option: +image-blocker{pattern}, which 
-  displays a checkerboard patthern and scales better than the logo.
-- PNG images will be used in place of GIF for JB built-in images
-  if configured with --enable-no-gif.
-- Clean up compiler warnings (mostly).
-- Improved handling of failed DNS lookups & diagnostics for failed bind
-  to listen socket
-- Made --no-daemon mode log to tty instead of logfile.
-- Various spec file and init script cleanups and improvements (Redhat and
-  SuSE).
-- CGI Editor works on OS/2 now.
-- Fix restart failure where sockets were in TIME_WAIT.
-- Fixes for actions cgi editor, make sure we have right file.
-- A --pidfile command line option now, in addition to --help, 
-  --version, --no-daemon, --user and configfile. --no-daemon replaces
-  the former -d option and _DEBUG define. --user will drop privileges 
-  to the specified user.
-- Signal handling cleanups (*nix).
-- CGI actions editor improvements and fixes.
-- Error handling improvements, especially out of memory.
-- Default re_filterfile fix that caused spurious IJB logos 
-  (instead of 'blank').
-- configure.in threading fixes for Solaris.
-- Various other minor fixes.
-
-
-*** Version 2.9.11 Beta Changes ***
-
-- Add "session" cookie concept where cookies exist for the life 
-of that browser session only (ie never goes to disk). 
-- Checks for correct header length.
-- Fix user:pass@xxxxxxxxxxxxxxx auth bug.
-- Better signal handling on *nix.
-- Fix CFLAGS hard-coded in configure.in
-- Fix threading bug re: gethostbyname() that caused random 
-URLs to fail in some cases.
-
-
-*** Version 2.9.11 Alpha Changes ***
-
-- A web-based editor for the actions file is included (go to http://i.j.b/).
-- Web-based toggle IJB on/off support.
-- Cookie handling has changed - the new +no-cookies-keep feature is now the
-default.
-- actionsfile is renamed to ijb.action.
-- junkbstr.txt is now config.txt on Win32.
-- Support for running IJB as a UNIX daemon process has improved.
-- Unix daemon now returns error code on failed start.
-- Timestamps in logfile and jarfile now.
-- Fix for the Netscape bug reintroduced in 2.9.9.
-- make should now abort if gmake (GNU make) not present.
-- Many other minor bugfixes
-- Start a ChangeLog :)
-
-
-
-*** Version 2.9.3 pre-Alpha Changes ***
-
-- Amiga support (completely untested by me - I don't have an Amiga)
-- "tinygif 3" support (redirects blocked images to a specified URL, so
-the browser doesn't have to load and cache many copies of the same
-image).
-- one case where there were both local and global "referrer" variables
-(yuck!) clarified by renaming the local one to "refer".
-- Fixed some places where close() was used instead of close_socket().
-Thanks to Jörg Strohmayer (joergs at users.sourceforge.net) for these.
-- Temporary hack to get FORCE_LOAD to work with IE.  I just lowercased the
-FORCE_LOAD_PREFIX.  Needs fixing properly.
-- Most URLs hardcoded into Junkbuster were changed to go through a script
-e.g. http://ijbswa.sourceforge.net/redirect.php?v=2.9.3&to=faq
-The only other URLs left are the GNU GPL:
-  http://www.fsf.org/copyleft/gpl.html
-and the home page:
-  http://ijbswa.sourceforge.net/
-... and various URLs which will be intercepted by Junkbuster anyway.
-TODO: Still need to do something with the URLs in Junkbuster Corp's 
-copyright/trademark notice on the bottom of the show-proxy-args page.
-- PCRE or GNU Regex is now a #define option.
-
-
-*** Version 2.9.2 pre-Alpha Changes ***
-
-- Andreas applied the latest version of the FORCE patch.
-
-
-*** Version 2.9.1 pre-Alpha Changes ***
-
-- in parsers.c, fixed two #ifdef FORCE to #ifdef FORCE_LOAD
-(BTW: I think FORCE is precise enough, since loading remote
-data is the whole purpose of a proxy..)
-- Set the FORCE_PREFIX (back) to 'IJB-FORCE-LOAD-'. While 'noijb.'
-is more elegant and looks like a hostname in the URL, it doesn't
-make clear to the inexperienced user that the proxy is bypassed. It
-also has a higher name collision risk.
-- Filled in the function header templates for my functions in
-parsers.c (again). They obviously got lost in our current
-patch war ;-)
-- Cut the credit for the §-referrer-option from the config file,
-that Stefan had placed there.
-- Improved the re_filterfile 
-
-
-*** Version 2.9.0 pre-Alpha Changes ***
-
--  Now use PCRE, not GNU REGEX.  I have not yet had chance to check the
-syntax of the block/image/cookie file to ensure that they match what
-is expected - however they seem to work.
--  Replaced "configure" script with one generated by "autoconf".  Also 
-use a header "config.h" (was ijbconfig.h in my previous release) for 
-the #defines.  "config.h" is now generated with "autoheader" from 
-"acconfig.h" and "configure.in".  (Note that to install you do not
-need autoconf or autoheader - just run "./configure".)
-To see command-line options, run "./configure --help".
-This is my first ever autoconf script, so it has some rough edges
-(how PCRE is handled is the roughest).
--  Error logging code replaced with new module errlog.c, based on the
-one from JunkbusterMT (but with the threading code removed).
--  Most of Rodney's 0.21 and 0.21A patches applied. (Marked *).  I did not
-apply all of these, since I had already independently done conditional
-popup file, conditional image file, and integration of popup code.
-- ACL, Jar and trust files conditionally compiled.
-- New source file headers.
-- Various cosmetic changes.  (But I have not consistently ordered the 
-config files - I think that's worthwhile, but it's 1am and I want to
-get this released!)
-- RCS tags on .h files.
--  RCS tags are const char[] rather than const char *.  (Saves 4 bytes
-per tag ;-)
-- VC++ project files renamed to vc_junkbuster.*.
-- show-proxy-args now shows status of all conditionals, not just REGEX
-- Various functions moved around.  Most notably all the system-specific
-sockets code which was spread between jcc.c, bind.c, and connect.c,
-has been moved to "jbsockets.c".  The non-system-specific code from
-connect.c and socks4.c has been movet to "gateway.c".  Also, the
-config file loader and the global variables it writes to have been
-moved to "loadcfg.c".  (Maybe this should go into loaders.c?)
-And candidate for the "worst filename ever" award is "miscutil.c",
-which contains, well, miscellaneous utility functions like zalloc.
-(Suggestions for a better name for this file are welcome!)
-- Loaders now use a common function to read a line and skip comments,
-and this function also stores the proxy_args.
-- Added ./junkbuster --help     (Not for Win32 GUI)
-- Added ./junkbuster --version  (Not for Win32 GUI)
-- Win32 resources are now all marked as "U.S. English", rather than
-being a mix of "U.S. English", "U.K. English" and "Irish English".
-- Version number changes to 2.9.0
-
-
-
-----------------------------------------------------------------------
-Copyright   :  Written by and Copyright (C) 2001-2008 the SourceForge
-               Privoxy team. http://www.privoxy.org/
-
-               Based on the Internet Junkbuster originally written
-               by and Copyright (C) 1997 Anonymous Coders and 
-               Junkbusters Corporation.  http://www.junkbusters.com/
-
-               This program is free software; you can redistribute it 
-               and/or modify it under the terms of the GNU General
-               Public License as published by the Free Software
-               Foundation; either version 2 of the License, or (at
-               your option) any later version.
-
-               This program is distributed in the hope that it will
-               be useful, but WITHOUT ANY WARRANTY; without even the
-               implied warranty of MERCHANTABILITY or FITNESS FOR A
-               PARTICULAR PURPOSE.  See the GNU General Public
-               License for more details.
-
-               The GNU General Public License should be included with
-               this file.  If not, you can view it at
-               http://www.gnu.org/copyleft/gpl.html
-               or write to the Free Software Foundation, Inc., 59
-               Temple Place - Suite 330, Boston, MA  02111-1307, USA.
diff --git a/external/privoxy/GNUmakefile.in b/external/privoxy/GNUmakefile.in
deleted file mode 100644
index 481633c..0000000
--- a/external/privoxy/GNUmakefile.in
+++ /dev/null
@@ -1,2156 +0,0 @@
-# Note:  Makefile is built automatically from Makefile.in
-#
-# $Id: GNUmakefile.in,v 1.180 2009/02/28 08:28:14 fabiankeil Exp $
-#
-# Written by and Copyright (C) 2001 - 2008 the SourceForge
-# Privoxy team. http://www.privoxy.org/
-#
-# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and 
-# Junkbusters Corporation.  http://www.junkbusters.com
-#
-# This program is free software; you can redistribute it 
-# and/or modify it under the terms of the GNU General
-# Public License as published by the Free Software
-# Foundation; either version 2 of the License, or (at
-# your option) any later version.
-#
-# This program is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.  See the GNU General Public
-# License for more details.
-#
-# The GNU General Public License should be included with
-# this file.  If not, you can view it at
-# http://www.gnu.org/copyleft/gpl.html
-# or write to the Free Software Foundation, Inc., 59
-# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-
-#############################################################################
-# Set make command correctly
-#############################################################################
-@SET_MAKE@
-
-#############################################################################
-# Version number (for RPM)
-#############################################################################
-
-VERSION_MAJOR = @VERSION_MAJOR@
-VERSION_MINOR = @VERSION_MINOR@
-VERSION_POINT = @VERSION_POINT@
-CODE_STATUS   = @CODE_STATUS@
-VERSION       = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-RPM_VERSION   = $(VERSION)
-RPM_PACKAGEV  = ""
-SNAPVERSION   = $(RPM_VERSION)-$(shell date "+%Y%m%d")
-
-
-#############################################################################
-# "make install" directories and variables
-#############################################################################
-
-#User Group paras
-USER         = @USER@
-GROUP	   = @GROUP@
-
-datarootdir  = @datarootdir@
-prefix       = @prefix@
-exec_prefix  = @exec_prefix@
-CONF_BASE    = @sysconfdir@
-SBIN_DEST    = @sbindir@
-MAN_DIR      = @mandir@
-MAN_DEST     = $(MAN_DIR)/man1
-SHARE_DEST   = @datadir@
-DOC_DEST     = $(SHARE_DEST)/doc/privoxy
-VAR_DEST     = @localstatedir@
-LOGS_DEST    = $(VAR_DEST)/log/privoxy
-PIDS_DEST    = $(VAR_DEST)/run
-
-# if $prefix = /usr/local then the default CONFDEST change from 
-# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy  
-# by the target rule CONF_DEST
-#
-# also if the $prefix is /usr/local and there is no
-# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
-# instead in this situation
-#
-# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it 
-# changes this to /var for storing the logs and pidfile
-
-# used in source dir only, the install goes to $share_dest/doc/privoxy
-DOK_WEB = doc/webserver/
-
-# Install usage should be compatible with install-sh.
-INSTALL    = @INSTALL@
-# Binaries
-BIN_MODE	 = 0755
-# Support files, docs, etc.
-RA_MODE   = 0664
-# Directory
-DIR_MODE   = 0755
-# Files daemon writes to.
-RWD_MODE   = 0660
-INSTALL_P  = -m $(BIN_MODE)  
-INSTALL_T  = -m $(RA_MODE)
-INSTALL_D  = -m $(DIR_MODE) -d
-INSTALL_R  = -m $(RWD_MODE)
-
-# install options for superuser install
-#INSTALL_S  = -g @GROUP@ -o @USER@ 
-
-#############################################################################
-# Build tools
-#############################################################################
-
-PROGRAM    = privoxy@EXEEXT@
-CC         = @CC@
-ECHO       = echo
-GZIP_PROG  = gzip
-
-# id -u is not universal. FIXME: need to set from configure. Breaks on
-# Solaris.
-#ID         = id -u
-ID         = id
-LD         = @CC@
-RM         = rm -f
-CP         = cp -f
-RMDIR      = rmdir
-MKDIR      = ./mkinstalldirs
-STRIP_PROG = strip
-SED        = sed
-GREP       = grep
-CAT        = cat
-RPM        = rpm
-RPMBUILD   = rpmbuild
-MV         = mv
-TAR        = tar
-LN         = ln
-TOUCH      = touch
-KILL       = kill
-CHMOD      = chmod
-CHOWN      = chown
-CHGRP      = chgrp
-GROUPS     = groups
-WDUMP      = @WDUMP@ -dump
-JADECAT    = @JADECAT@
-JADEBIN    = @JADEBIN@
-DB         = $(JADEBIN) $(JADECAT) -ihtml -t sgml  -D.. -d ldp.dsl\#html
-DB2HTML    = @DB2HTML@
-MAN2HTML   = @MAN2HTML@
-G2H_CMD    = groff -mandoc -Thtml
-TARGET_OS  = @host@
-PERL       = perl
-DOC_DIR    = doc/source
-DOC_TMP    = $(DOC_DIR)/tmp
-DOC_STATUS = @DOC_STATUS@
-
-# Program to do LF->CRLF
-#
-# The sed version should be the most portable, but it doesn't for for me,
-# the other two do.  FIXME.
-#   - Jon
-#DOSFILTER  = $(SED) -e $$'s,$$,\r,'
-#DOSFILTER  = gawk -v ORS='\r\n' '{print $0;}'
-DOSFILTER  = $(PERL) -p -e 's/\n/\r\n/'
-CVSROOT    = :pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa
-#TMPDIR     := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
-
-#############################################################################
-# Setup for make distribution rh and suse for now 
-#############################################################################
-
-TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
-RPM_BASE = @RPM_BASE@
-
-#############################################################################
-# We include these files in our distributions
-#############################################################################
-CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
-# take care that no CVS .cvsignore or other crappy files
-# are included here
-# and escape every '#' in the find. doh.
-CONFIG_FILES = $(CONFIGS) \
-		`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
-
-DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
-		`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
-		`find doc/webserver/ -name "*.css"` \
-                privoxy.1
-
-#############################################################################
-# Filenames and libraries
-#############################################################################
-
-C_SRC  = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
-         errlog.c filters.c gateway.c jbsockets.c jcc.c \
-         list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
-         urlmatch.c
-
-C_OBJS = $(C_SRC:.c=.@OBJEXT@)
-C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
-
-W32_SRC   = @WIN_ONLY@xxxxxxxx w32taskbar.c win32.c w32svrapi.c
-W32_FILES = @WIN_ONLY@xxxxxxx
-W32_OBJS  = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
-W32_HDRS  = @WIN_ONLY@xxxxxxxx w32taskbar.h win32.h w32res.h w32svrapi.h
-W32_LIB   = @WIN_ONLY@-lwsock32 -lcomctl32
-W32_INIS  = @WIN_ONLY@xxxxxxxxxx trust.txt
-
-PCRS_SRC     = @STATIC_PCRS_ONLY@xxxxxx
-PCRS_OBJS    = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
-PCRS_HDRS    = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
-
-PCRE_SRC     = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
-PCRE_OBJS    = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
-PCRE_HDRS    = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
-
-# No REGEX (maybe because dynamically linked pcreposix):
-REGEX_SRC    =
-@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
-
-REGEX_OBJS   = $(REGEX_SRC:.c=.@OBJEXT@)
-REGEX_HDRS   = $(REGEX_SRC:.c=.h)
-
-# Dependencies introduced by #include "project.h".
-PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
-
-# Socket libraries for platforms that need them explicitly defined
-SOCKET_LIB   = @SOCKET_LIB@
-
-# PThreads library, if needed.
-PTHREAD_LIB  = @PTHREAD_ONLY@@PTHREAD_LIB@
-
-SRCS         = $(C_SRC)  $(W32_SRC)  $(PCRS_SRC)  $(PCRE_SRC)  $(REGEX_SRC)
-OBJS         = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
-HDRS         = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
-LIBS         = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
-
-
-#############################################################################
-# Compiler switches
-#############################################################################
-
-# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
-# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
-# Win32 GUI build.
-# The flag "-pthread" is required if using Pthreads under Linux (and
-# possibly other OSs).
-SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
-
-# Add your flags here 
-OTHER_CFLAGS =   
-
-CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
-         @STATIC_PCRE_ONLY@ -Ipcre 
-
-LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
-
-
-#############################################################################
-# Build section.
-#
-# There should NOT be any targets above this line.
-#############################################################################
-all: $(PROGRAM) default.action
-
-
-#############################################################################
-# Phony targets
-#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
-PID_DEST check_doc install-strip uninstall GROUP_T
-
-#############################################################################
-# Define this explicitly because Solaris is broken!
-#############################################################################
-%.o: %.c
-	$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
-
-
-#############################################################################
-# Strip master copy comments from default.action:
-#############################################################################
-default.action: default.action.master
-	$(GREP) -v '^#MASTER#' $< > $@
-
-#############################################################################
-# Win32 config files
-#############################################################################
-
-inifiles: $(W32_INIS)
-
-config.txt: config
-	$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
-	       -e 's!\logfile logfile!logfile privoxy.log!' \
-	       -e 's!#Win32-only: !!' \
-	       < $< | \
-	       $(DOSFILTER) > $@
-	# LF to CRLF in default.action
-	$(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
-	# LF to CRLF in default.filter
-	$(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
-
-trust.txt: trust
-	$(DOSFILTER) < $< > $@ 
-
-#############################################################################
-# Pre-dist check:
-#############################################################################
-dist-check:
-	@if [ -d CVS ]; then \
-           $(ECHO) "***************************************************"; \
-           $(ECHO) "***                                             ***"; \
-           $(ECHO) "***                  WARNING                    ***"; \
-           $(ECHO) "***                                             ***"; \
-           $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
-           $(ECHO) "*** that you are trying to build a distribution ***"; \
-           $(ECHO) "*** package based on a checked out, not an      ***"; \
-           $(ECHO) "*** exported copy of the source tree. Please    ***"; \
-           $(ECHO) "*** see \"Releasing a new version\" in the        ***"; \
-           $(ECHO) "*** developer manual.                           ***"; \
-           $(ECHO) "***                                             ***"; \
-           $(ECHO) "***************************************************"; \
-           $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
-           $(ECHO) -n "really want to proceed: "; \
-           read answer; \
-           if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
-         fi;
-
-
-#############################################################################
-# create tar.gz from CVS:
-# This make-target is usually called through 'create-archive'. If you 
-# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
-# tar.gz with the current date in the name and as a releasenumber in the 
-# spec-file. But the main usage is to run it as follows (Red Hat example):
-# make SNAPVERSION=1.6x create-snapshot
-# This creates a tar.gz and spec-file for a Red Hat 6.x version.
-#############################################################################
-create-snapshot:
-	@tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
-	[ x"$$tag" = x"(none)" ] && tag=HEAD; \
-	echo "*** Creating package from $$tag!"; \
-	TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
-	cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
-	cd $$TMPDIR/current; \
-	TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
-	if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-		-e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
-		privoxy-rh.spec > $$TMPFILE ; then \
-			$(MV) -f $$TMPFILE privoxy-rh.spec; \
-	else \
-		$(ECHO) "Could not set version info in specfile."; \
-		exit 1;\
-	fi;\
-	if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-             -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
-              privoxy-suse.spec > $$TMPFILE ; then \
-			$(MV) -f $$TMPFILE privoxy-suse.spec; \
-	else \
-		$(ECHO) "Could not set version info in specfile."; \
-		exit 1;\
-	fi; \
-	$(RM) $$TMPFILE; \
-	cd $$TMPDIR/current; \
-	$(TAR) --exclude ".cvsignore" --exclude "CVS" \
-		-czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
-	$(RM) -rf $$TMPDIR
-	@echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz"
-
-
-#############################################################################
-# looks at the version of Makefile and exports a corresponding source-tree
-# example: if the Makefile has the sticky tag v_2_9_13, you'll get 
-# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
-# Red Hat and one for SuSe (different spec-files)
-#############################################################################
-create-archive:
-	make SNAPVERSION=$(SNAPVERSION) create-snapshot
-
-#############################################################################
-# RPM specifice stuff (SuSE or Redhat, ..)
-#############################################################################
-rpm-stuff: dist-check clean clobber 
-	for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
-		if [ ! -w $(RPM_BASE)/$$dir ]; then \
-			$(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
-			$(ECHO) "Or add a suitable path to .rpmmacros like."; \
-			$(ECHO) "%_topdir /home/foo/rpm-build"; \
-			exit 1; \
-		fi; \
-	done; \
-
-check-release:
-	@if [ "$(RPM_PACKAGEV)" = "" ]; then \
-		echo ; \
-		echo "	ERROR: NO RPM_PACKAGEV VALUE"; \
-		echo "	No value given for RPM_PACKAGEV. Please use:"; \
-		echo "	make dist-upload RPM_PACKAGEV=release"; \
-		echo "	where \"release\" is the release number you want to and"; \
-		echo "	where \"dist\" is the name of the distro (redhat or suse)"; \
-		echo ; \
-		echo "	Ex: make redhat-upload RPM_PACKAGEV=1"; \
-		echo ""; \
-		echo "ATTENTION: If your distribution use a specific tag on the"; \
-		echo "           release field (like \"cl\" for Conectiva, and"; \
-		echo "           \"mdk\" for Mandrake), DO NOT put it on the value"; \
-		echo "           given to RPM_PACKAGEV. It will be added automaticaly."; \
-		echo "           Do it like you would do for a redhat package,"; \
-		echo "           (i.e. just the number)."; \
-		echo ; \
-		exit 1; \
-	fi
-
-
-#############################################################################
-# Create Conectiva specfile from RedHat specfile
-#############################################################################
-conectiva-spec:
-	$(RM) privoxy-cl.spec
-	chmod a+x genclspec.sh
-	./genclspec.sh
-
-#############################################################################
-# Conectiva distribution for x86
-#############################################################################
-conectiva-dist: rpm-stuff conectiva-spec
-
-	$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
-	$(RPMBUILD) --clean -ta  $(TAR_ARCH)
-	if [ -f $(TAR_ARCH) ]; then  $(RM) $(TAR_ARCH); fi
-
-conectiva-upload: check-release
-	make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
-
-#############################################################################
-# redhat distribution alpha and x86
-#############################################################################
-redhat-dist: rpm-stuff
-	echo $(CONFIG_FILES)
-	$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
-	$(RPMBUILD) --clean -ta  $(TAR_ARCH)
-	if [ -f $(TAR_ARCH) ]; then  $(RM) $(TAR_ARCH); fi
-
-# For testing build issues only! Use redhat-dist for official releases.
-redhat-test: 
-	echo $(CONFIG_FILES)
-	$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
-	$(RPMBUILD) --clean -tb  $(TAR_ARCH)
-	if [ -f $(TAR_ARCH) ]; then  $(RM) $(TAR_ARCH); fi
-	@echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
-
-# anonymously ncftps the rpms to sourceforge
-redhat-upload: check-release
-	ncftpput -u anonymous -p ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
-	ncftpput -u anonymous -p ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
-	@$(ECHO) -------------------------------------------------------
-	@$(ECHO) Now goto
-	@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
-	@$(ECHO) ... and release the files.
-	@$(ECHO) -------------------------------------------------------
-     # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
-
-
-#############################################################################
-# Creates a Red Hat sourcepackage from CVS (not from the current sources
-# on disk)
-#############################################################################
-redhat-srpm: 
-	make create-archive
-	$(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
-
-
-#############################################################################
-# suse distribution. works fine. no need to be root. 
-#############################################################################
-suse-dist: rpm-stuff
-# 	TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
-# 	if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-#              -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
-#               privoxy-suse.spec > $$TMPFILE ; then \
-# 	$(MV) -f $$TMPFILE privoxy-suse.spec; \
-# 	else \
-# 		$(ECHO) "Could not set version info in specfile."; \
-# 	exit 1;\
-# 	fi
-
-	$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
-	$(RPMBUILD) --clean -ta  $(TAR_ARCH)
-	if [ -f $(TAR_ARCH) ]; then  $(RM) $(TAR_ARCH); fi
-
-# anonymously ncftps the rpms to sourceforge
-suse-upload: check-release
-	ncftpput -u anonymous -p ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
-	ncftpput -u anonymous -p ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
-	@$(ECHO) -------------------------------------------------------
-	@$(ECHO) Now goto
-	@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
-	@$(ECHO) ... and release the files.
-	@$(ECHO) -------------------------------------------------------
-
-# handle with care. use with root.
-suse-clean:
-	$(RPM) -e junkbuster-suse || true
-	$(RM) -r /etc/junkbuster
-	$(RM) -r /etc/rc.d/junkbuster*
-	$(RM) -r /var/run/junkbuster.pid 
-	$(RM) -r /var/log/junkbuster
-	$(RM) /etc/init.d/junkbuster
-	$(RM) /usr/sbin/junkbuster
-	$(RM) /usr/sbin/rcjunkbuster
-	$(RM) /usr/share/man/man1/junkbuster.1.gz
-	$(RPM) -e privoxy-suse || true
-	$(RM) -r /etc/privoxy
-	$(RM) -r /etc/rc.d/privoxy*
-	$(RM) -r /var/run/privoxy.pid 
-	$(RM) -r /var/log/privoxy
-	$(RM) /etc/init.d/privoxy
-	$(RM) /usr/sbin/privoxy
-	$(RM) /usr/sbin/rcprivoxy
-	$(RM) /usr/share/man/man1/privoxy.1.gz
-
-#############################################################################
-# generic distribution
-#############################################################################
-gen-dist: dist-check
-	@$(ECHO) ""
-	@$(ECHO) "You have run autoconf && autoheader && ./configure right?"
-	@$(ECHO) ""
-	$(MAKE) $(PROGRAM)
-	$(STRIP_PROG) $(PROGRAM)
-	$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
-# add program
-	(cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
-# add config files
-	for foo in $(CONFIG_FILES); do \
-		(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
-	done; 
-# add documentation
-	for foo in $(DOC_FILES); do \
-		(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
-	done;
-# and zip the archive
-	$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
-	$(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
-	@$(ECHO) Distribution with binary created.
-
-# anonymously ncftps the package to sourceforge
-gen-upload:
-	ncftpput -u anonymous -p ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
-	@$(ECHO) -------------------------------------------------------
-	@$(ECHO) Now goto
-	@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
-	@$(ECHO) ... and release the files.
-	@$(ECHO) -------------------------------------------------------
-
-# use with care
-gen-clean:
-	$(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
-
-#############################################################################
-# solaris distribution. verified on SF machines by swa.
-#############################################################################
-solaris-dist: gen-dist
-	@$(ECHO) Done.
-# anonymously ncftps the package to sourceforge
-solaris-upload: gen-upload
-	@$(ECHO) Done.
-# use with care
-solaris-clean: gen-clean
-	@$(ECHO) Done.
-
-#############################################################################
-# hpux distribution
-#############################################################################
-hpux-dist:
-	@$(ECHO) coming soon. 
-hpux-upload:
-	@$(ECHO) coming soon. 
-
-#############################################################################
-# debian distribution
-#############################################################################
-debian-dist:
-	@$(ECHO) coming soon. 
-debian-upload:
-	@$(ECHO) coming soon. 
-
-#############################################################################
-# macosx distribution
-#############################################################################
-macosx-dist:
-	@$(ECHO) coming soon. 
-macosx-upload:
-	@$(ECHO) coming soon. 
-
-#############################################################################
-# amiga distribution
-#############################################################################
-amiga-dist:
-	@$(ECHO) coming soon. 
-amiga-upload:
-	@$(ECHO) coming soon. 
-
-#############################################################################
-# freebsd distribution. verified on SF machines by swa.
-#############################################################################
-freebsd-dist: gen-dist
-	@$(ECHO) Done.
-# anonymously ncftps the package to sourceforge
-freebsd-upload: gen-upload
-	@$(ECHO) Done.
-# use with care
-freebsd-clean: gen-clean
-	@$(ECHO) Done.
-
-#############################################################################
-# Windows distribution
-#############################################################################
-win-dist:
-	$(ECHO) Not implemented.
-
-
-#############################################################################
-# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
-# (FIXME:) only parts of the static / generated docs mix in doc/webserver
-#############################################################################
-
-tarball-dist: dist-check clean clobber
-	$(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
-
-	for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
-	-o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
-	-name "PACKAGERS" \)`; do \
-	   files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
-	done &&  \
-	cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
-
-# and zip the archive
-	$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) 
-	$(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
-	@$(ECHO) Tarball distribution created.
-
-# anonymously ncftps the tarball to sourceforge
-tarball-upload:
-	ncftpput -u anonymous -p ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
-	@$(ECHO) -------------------------------------------------------
-	@$(ECHO) Now goto
-	@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
-	@$(ECHO) ... and release the files.
-	@$(ECHO) -------------------------------------------------------
-
-tarball-clean:
-	$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
-
-#############################################################################
-#
-# Documentation
-#
-# converts doc/source/*.sgml into html and man pages
-#
-#############################################################################
-
-# developer manual
-dok-devel: 
-	$(RM) doc/webserver/developer-manual/*.html
-	$(RM) -r doc/source/developer-manual
-	mkdir -p doc/source/developer-manual
-	cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
-
-# user manual
-dok-user: 
-	$(RM) doc/webserver/user-manual/*.html
-	$(RM) -r doc/source/user-manual/
-	mkdir -p doc/source/user-manual
-	cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
-	# FIXME: temp fix so same stylesheet gets in more than one place so it works
-	# for all doc set-ups, including the 'user manual' config option in local
-	# system where it MUST be in same directory as html.
-	$(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
-
-# faq
-dok-faq: 
-	$(RM) doc/webserver/faq/*.html
-	$(RM) -r doc/source/faq
-	mkdir -p doc/source/faq
-	cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
-
-# man page, one variation. Try to use the next target, just 'make man'. 
-dok-man: 
-	$(RM) doc/man/* doc/webserver/man-page/*.html
-ifneq ($(MAN2HTML),false)
-	$(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
-	man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
-	$(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
-else
-	$(MAKE) groff2html
-endif
-
-# Build man page from sgml. This requires the SGMLSpm perl module.
-# See CPAN, or your favorite perl repository. This is the preferred 
-# target for man page generation!
-man: dok-release
-	mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
-	nsgmls ../privoxy-man-page.sgml  | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
-	perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
-	perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
-	perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
-	perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
-	perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
-	perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
-	$(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
-
-# For those with man2html ala RH7s.
-man2html:
-	mkdir -p doc/webserver/man-page
-ifneq ($(MAN2HTML),false)
-	$(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
-	$(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
-	$(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
-# Twice because my version of man2html is pulling in commas and periods in URLs.
-	$(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
-	$(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
-	$(PERL) -pi.bak -e "s/\['a\]/\&aacute;/g;s/\['e\]/\&eacute;/g" tmp.html
-# Get rid of spurious  from conversion. (How to do this with perl?)
-	$(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
-else
-	$(MAKE) groff2html
-endif
-
-
-# Otherwise we get plain groff conversion.
-groff2html:
-	$(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
-
-
-# readme page and INSTALL file
-dok-readme: dok-release
-	cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
-	env -u LANG $(WDUMP) tmp.html > ../../README ;\
-	$(DB)-notoc -V nochunks install.sgml > tmp.html &&\
-	env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
-	$(RM) tmp.*
-
-# index.sgml is used to create both the Home Page, and a local index
-# for documentation, etc.
-#
-# index.html for webserver:
-dok-webserver: 
-	cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
-	$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
-	s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
-	s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
-	s/\.\d\. //;\
-	s/__copy/&copy;/'\
-     doc/webserver/index.html && $(RM) doc/webserver/*.bak
-
-# privoxy-index.html for local documentation:
-dok-index: 
-	cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
-	$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
-	s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
-	s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
-	s/\.\d\. //;\
-	s/__copy/&copy;/' \
-     doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
-
-# Main documentation target.
-dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
-	@$(ECHO) Documentation created.
-
-#
-# an alternative to the above dok. disabled man page creation for the moment
-#
-redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
-	@$(ECHO) Documentation created.
-
-## Make README
-redhat-readme: 
-	cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
-	  tmp.html > ../../README && $(RM) -r tmp.html
-
-## Make AUTHORS file
-dok-authors: 
-	cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
-	  tmp.html > ../../AUTHORS && $(RM) tmp.html
-
-# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
-# exceptions accordingly. This needs to go before any doc building (doh).
-dok-release:
-	@$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
-	@$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
-     s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
-     doc/source/*sgml doc/source/*/*sgml
-	$(RM) -r doc/source/*bak doc/source/*/*bak
-ifeq ($(CODE_STATUS),stable)
-	@$(ECHO) Setting docs to stable $(VERSION)
-	@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
-     s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
-     doc/source/*sgml doc/source/*/*sgml
-	$(RM) -r doc/source/*bak doc/source/*/*bak
-else
-	@$(ECHO) Setting docs to not stable $(VERSION)
-	@$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
-     s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
-     doc/source/*sgml doc/source/*/*sgml
-	$(RM) -r doc/source/*bak doc/source/*/*bak
-endif
-
-# Create release announcement in text and html, with short and long versions.
-# This is a standalone target, and must be invoked directly.
-# announce: dok-release
-# 	mkdir -p $(DOC_TMP)
-# 	cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
-# 	mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
-# 	cd $(DOC_TMP) && $(DB) announce.sgml &&\
-# 	mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
-# 	mv -f *html *txt ../../.. 
-# 	rm -fr $(DOC_TMP)
-
-# The main Privoxy config file, generated from sgml sources. 
-# NOTE: This will require some hand editing. The new file is outputted 
-# as config.new so that problem sections can be compared to previous
-# version. This is hardcored to w3m for html/text conversion. Also, 
-# requires the shell util 'fmt'.
-config-file: dok-release
-	cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
-	env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
-	$(PERL) -i.bak utils/prepare-configfile.pl config.new
-
-	$(RM) *.bak
-	@$(ECHO)  "****************************************************"
-	@$(ECHO)  "The output file is config.new."
-	@$(ECHO)  "Now -- you need to hand edit the results!!!"
-	@$(ECHO)  "In particular, check the Debug levels, the"
-	@$(ECHO)  "permit-access, forward & socks examples and the"
-	@$(ECHO)  "various user-manual examples, which all"
-	@$(ECHO)  "probably got hammered."
-	@$(ECHO)  "****************************************************"
-
-# config file, alternate version using lynx (perl stuff unfinished). Lynx
-# does not do so good a job.
-config-file-alt: 
-	cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
-	$(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
-	lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
-	$(PERL) -pi -e 's/^(   )//;\
-	                s/:$\/:\n/' config.new
-
-#############################################################################
-#
-# Webserver
-#
-# moves dokumentation to webserver
-#
-#############################################################################
-webserver: tidy
-	@$(ECHO) -------------------------------------------------------
-	@$(ECHO) You will need to "create" a SF shell first:
-	@$(ECHO)    ssh -t USER,PROJECT@xxxxxxxxxxxxxxxxxxxxx create
-	@$(ECHO) Please make sure your documentation files are up to date.
-	@$(ECHO) Note that this command updates the home page and scps 
-	@$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
-	@$(ECHO) You will also need to change the user-manual symlink manually.
-	@$(ECHO) -------------------------------------------------------
-
-	@$(ECHO) Uploading html
-	@cd doc/webserver; \
-          upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
-          $(TAR) c $$upload | ssh shell.sf.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
-
-	@$(ECHO) Fixing permissions
-	@ssh shell.sf.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
-	@ssh shell.sf.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
-	@ssh shell.sf.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
-
-
-web-actions: tidy
-	@$(ECHO) Uploading 
-	@cd doc/webserver/actions; \
-          upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
-          $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
-
-	@$(ECHO) Fixing permissions
-	@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
-	@ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
-
-## 
-dok-put:
-	tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
-	     --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
-		doc/* INSTALL LICENSE AUTHORS README \
-		-czf $(DOC_FILE) ;\
-		$(ECHO) "Uploading doc package ..." ;\
-		scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
-		@ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
-		$(RM) $(DOC_FILE)
-
-dok-get:
-	cd /tmp ;\
-	$(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
-	$(TAR) -zxvf $(DOC_FILE)
-
-
-#############################################################################
-# Source file dependencies
-#############################################################################
-
-actions.@OBJEXT@:   actions.c   actions.h   config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
-cgi.@OBJEXT@:       cgi.c       cgi.h       config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@:   cgiedit.c   cgiedit.h   config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
-deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
-encode.@OBJEXT@:    encode.c    encode.h    config.h
-errlog.@OBJEXT@:    errlog.c    errlog.h    config.h $(PROJECT_H_DEPS) @WIN_ONLY@xxxxxxxx
-filters.@OBJEXT@:   filters.c   filters.h   config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@xxxxxxx 
-gateway.@OBJEXT@:   gateway.c   gateway.h   config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
-jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@:       jcc.c       jcc.h       config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@xxxxxxxx win32.h w32svrapi.h cgi.h
-list.@OBJEXT@:      list.c      list.h      config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@:   loadcfg.c   loadcfg.h   config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@xxxxxxxx win32.h
-loaders.@OBJEXT@:   loaders.c   loaders.h   config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
-miscutil.@OBJEXT@:  miscutil.c  miscutil.h  config.h
-parsers.@OBJEXT@:   parsers.c   parsers.h   config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
-ssplit.@OBJEXT@:    ssplit.c    ssplit.h    config.h miscutil.h
-urlmatch.@OBJEXT@:  urlmatch.c  urlmatch.h  config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
-
-# GNU regex
-gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
-
-# PCRS
-pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h 
-
-# PCRE
-pcre/get.@OBJEXT@:        pcre/get.c        pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@:       pcre/pcre.c       pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c 
-pcre/pcreposix.@OBJEXT@:  pcre/pcreposix.c  pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
-pcre/study.@OBJEXT@:      pcre/study.c      pcre/config.h pcre/internal.h pcre/pcre.h
-
-# An auxiliary program makes the PCRE default character table source
-
-pcre/chartables.c:   pcre/dftables@EXEEXT@
-		pcre/dftables@EXEEXT@ >pcre/chartables.c
-
-pcre/dftables@EXEEXT@:       pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
-		$(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
-
-# Win32
-w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
-w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
-
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
-	windres -D__MINGW32__=0.2 -O coff -i $< -o $@
-
-# AmigaOS
-@AMIGAOS_ONLY@OBJS += amiga.o
-@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
-@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
-@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
-@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
-@AMIGAOS_ONLY@else
-@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
-@AMIGAOS_ONLY@endif
-@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
-
-
-$(PROGRAM): $(OBJS) $(W32_FILES)
-	$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
-
-clean:
-	$(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
-
-tidy:
-	$(RM) `find . -name "*~"`
-	$(RM) `find . -name "#*#"` # Emacs backup files
-	$(RM) `find . -name ".\#*"`
-
-clobber: tidy
-	$(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
-              privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
-	$(RM) -r autom4te.cache
-
-#
-# FIXME: What is all this? 
-#
-	$(RM) cscope.*  *.pdb *.lib *.exp 
-
-distclean: clobber
-
-tags: $(SRCS) $(HDRS)
-	etags $(SRCS) $(HDRS)
-
-CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
-		$(ECHO) "$(CONF_BASE)/privoxy";\
-	 else\
-		 $(ECHO) "$(CONF_BASE)";\
-	 fi)
-
-LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
-		$(ECHO) "/var/log/privoxy" ;\
-	 else\
-		 $(ECHO) "$(LOGS_DEST)";\
-	 fi)
-
-PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
-		$(ECHO) "/var/run" ;\
-	 else\
-		 $(ECHO) "$(PIDS_DEST)";\
-	 fi)
-
-check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ]  && [ -d "$(prefix)/doc" ];then \
-		$(ECHO) "1";\
-	 else\
-		 $(ECHO) "0";\
-	 fi)
-
-# If USER is specified but no GROUP, assume there is a GROUP of same name.
-GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
-		$(ECHO) "$(USER)" ;\
-	 else\
-		 $(ECHO) "$(GROUP)";\
-	 fi)
-
-install-strip:
-	$(MAKE) install STRIP=-s
-
-# FIXME: Test USER and GROUP on Slack to make sure this works as 
-# intended.
-#
-# FIXME: id handling needs help, probably via configure, since 'id -u' is not 
-# universally reliable (eg Solaris). Group handling could be better. 
-# Perhaps the whole user/group validation should be done here, and simplified.
-PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
-install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
-	@# Quick test for valid USER.
-	@if [ -n "$(USER)" ]; then \
-		$(ID) $(USER) >/dev/null || exit 1;\
-	fi
-	@# Test for valid group. FIXME. USER does not have to belong to GROUP 
-	@# for file ownership purposes.
-# 	if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
-# 		$(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
-# 	fi
-
-	@$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
-	$(CHMOD) $(DIR_MODE) $(MKDIR)
-	@$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
-		$(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
-		$(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
-	@# Install the executable binary, strip if invoked as install-strip
-	@test -n "$(STRIP)" &&\
-	$(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
-	$(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
-	$(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
-
-	@# Install the DOCS and man page. install-sh only does one file at a time.
-	@# FIXME: only handles jpegs.
-	-@if [ $(check_doc) = 0 ]; then \
-		DOC=$(DOC_DEST) ;\
-	else \
-		DOC=$(prefix)/doc/privoxy ;\
-	fi;\
-	$(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
-	     $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
-	if [ -d "$(DOK_WEB)" ]; then \
-		$(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
-          for i in user-manual developer-manual faq; do \
-               for ii in $(DOK_WEB)/$$i/*html; do \
-                    $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
-               done ;\
-          done ;\
-		for i in $(DOK_WEB)/user-manual/*jpg; do \
-               $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
-          done ;\
-		$(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
-		$(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
-		$(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
-		$(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
-		$(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
-		$(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
-		$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
-		$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
-	fi
-	@# Not all platforms support gzipped man pages.
-	@$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
-	-$(INSTALL) $(INSTALL_T) privoxy.1  $(DESTDIR)$(MAN_DEST)/privoxy.1
-
-	@# Change the config file default directories according to the configured ones
-	@$(ECHO) Rewriting config for this installation
-	@if [ -f config.base ] ; then \
-		$(CAT) config >config~ ;\
-		$(MV) config.base config ;\
-	fi
-	$(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
-	$(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
-	-@if [ $(check_doc) = 0 ]; then \
-      $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
-	else \
-      $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
-	fi;\
-	$(MV) config config.base
-	$(MV) config.updated config 
-
-	@# Install the config support files. Test for root install, and abort 
-	@# if there is no privoxy user, and no other user was enabled during 
-	@# configure. Later, install init script if appropriate.
-	@$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
-	@for i in `find templates -type f`; do \
-		$(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
-	done
-
-	@# FIXME: group/user validation is overly convoluted.
-	@# If superuser install ... we require a minimum of group ownership
-	@# of those files the daemon writes to, to be non-root owned.
-	@if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
-		if [ x$(USER) = x ] || [ $(USER) = root ]; then \
-			if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
-				if [ "`$(ID) privoxy`" ] && \
-					$(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
-					$(ECHO) "Warning: Setting group owner to privoxy";\
-					GROUP_T=privoxy ;\
-				else \
-					$(ECHO)  "******************************************************************" ;\
-					$(ECHO)  " WARNING! WARNING! installing config files as root!" ;\
-					$(ECHO)  " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
-					$(ECHO)  " and to install the config files as that user and/or group!" ;\
-					$(ECHO)  " Please read INSTALL, and create a privoxy user and group!" ;\
-					$(ECHO)  "*******************************************************************" ;\
-					exit 1 ;\
-				fi ;\
-			else \
-				GROUP_T=$(GROUP) ;\
-			fi ;\
-			INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
-		else \
-			$(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
-			INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
-			GROUP_T=$(GROUP_T) ;\
-		fi ;\
-	else \
-		if [ ! "`id $(USER)`" = "`id`" ] ;then \
-			$(ECHO) "** WARNING ** current install user different from configured user!!" ;\
-			$(ECHO) "Edit may fail." ;\
-		fi ;\
-		INSTALL_CONF="$(INSTALL_R)" ;\
-	fi ;\
-	$(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
-	for i in $(CONFIGS); do \
-		if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
-			$(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
-			$(ECHO) Installing fresh $$i;\
-			$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
-		elif [ -s "$(CONF_DEST)/$$i" ]; then \
-			$(ECHO) Installing $$i as $$i.new ;\
-			$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
-			NEW=1;\
-		else \
-			$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
-		fi ;\
-	done ;\
-	if [ -n "$$NEW" ]; then \
-		$(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
-		$(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
-	fi ;\
-	[ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
-		$(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
-		$(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
-	if [ x$$USER != x ]; then \
-		$(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
-		$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
-	fi ;\
-	if [ x$$GROUP_T != x ]; then \
-		$(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
-		$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
-	fi ;\
-	$(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
-	if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
-		if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
-               $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
-               $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
-               $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
-               $(SED) 's+%USER%+$(USER)+' | \
-               $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
-			$(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
-               $(ECHO) "Installing for Slackware." ;\
-               $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
-		elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
-               $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
-			$(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
-			$(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
-			$(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
-			$(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
-			$(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
-			$(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
-			$(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
-		elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
-			$(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
-			$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
-			$(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
-		fi ;\
-	else \
-		$(ECHO) "No init script installed, install it manually if needed" ;\
-	fi
-	$(RM) config.base config.tmp
-	@# mmmmm, good.
-	@$(ECHO) "$(PROGRAM_V) installation succeeded!"
-	@$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
-
-# rmdir is used as a precaution since it will not remove non-empty
-# directories. RH init script creates lock file and pid file.
-uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
-	@$(ECHO) Starting Privoxy uninstallation
-	@# KILL privoxy if running
-	@# XXX: the chkconfig line may need a DESTDIR prefix.
-	-@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
-		$(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
-		chkconfig --del $(PROGRAM) 2>/dev/null;\
-	fi
-	-@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
-         $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
-	-@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
-          $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
-
-	@# Program binary
-	@$(ECHO) Removing $(PROGRAM) binary
-	$(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
-
-	@# config files and dir, and maybe old install backups
-	-@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
-		$(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
-		$(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
-		cd $(DESTDIR)$(CONF_DEST) ;\
-		for i in $(DESTDIR)$(CONFIGS); do \
-			[ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
-		done ;\
-	fi
-	@$(ECHO) Removing $(PROGRAM) config files
-	-@for i in $(DESTDIR)$(CONFIGS); do \
-		test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
-		$(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
-	done
-	-@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
-	$(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
-
-	@# man page and docs
-	@$(ECHO) Removing $(PROGRAM) docs
-	-$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
-	-$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
-
-	@# Log and pidfile
-	@$(ECHO) Removing $(PROGRAM) logs
-	-$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
-
-	@# Final clean up of unused directories. Special handling of CONF and LOG
-     # destinations.
-	@$(ECHO) Removing $(PROGRAM) directories
-	@for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
-		if test -d $$i; then \
-			$(ECHO) Removing $$i ;\
-			$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
-		fi;\
-	done
-	@if [  ! "$(prefix)" = "/usr/local" ] ;then \
-		for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
-                         $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
-			if test -d $$i; then \
-				$(ECHO) Removing $$i ;\
-				$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
-			fi;\
-		done;\
-		if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
-			$(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
-			$(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
-		fi ;\
-		if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
-			$(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
-			$(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
-		fi ;\
-		if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
-			$(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
-			$(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
-		fi ;\
-		if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
-			$(ECHO) Removing $(DESTDIR)$(prefix) ;\
-			$(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
-			$(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
-		fi;\
-	fi
-
-	@# init scripts and logrotate
-	@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
-		$(ECHO) Removing $(PROGRAM) init script ;\
-		if [ -f $(DESTDIR)/etc/slackware-version ] && \
-	                [ -d $(DESTDIR)/etc/rc.d/ ]  && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
-			$(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
-		elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
-                       && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
-			$(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
-		elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
-			$(RM) $(DESTDIR)/etc/init.d/privoxy ;\
-		else \
-			$(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
-		fi ;\
-	fi
-	@$(ECHO) Privoxy uninstalled, bye
-
-coffee:
-	 @perl	-e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,'	 \
-		-e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,'  \
-		-e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
-		-e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,'  \
-		-e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
-		-e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
-		-e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
-
-#############################################################################
-
-## Local Variables:
-## tab-width: 3
-## end:
-
-# $Log: GNUmakefile.in,v $
-# Revision 1.180  2009/02/28 08:28:14  fabiankeil
-# pcrs.o doesn't depend on pcre/pcre.h if we are linking
-# dynamically. Patch provided by drauh in #2056286.
-#
-# Revision 1.179  2009/02/22 14:48:31  hal9
-# Updates to the 'make webserver' target that recreates the home page and uploads
-# fresh documents to reflect new SF realities, and more explanation of process.
-#
-# Revision 1.178  2009/02/08 18:35:48  fabiankeil
-# Move the match-all section into a separate file
-# (match-all.action) so we can safely overwrite the
-# default actions when updating. Based on Roland's
-# patch #1563977.
-#
-# Revision 1.177  2009/01/13 16:44:32  fabiankeil
-# Delete the standard.action file after moving
-# the pre-settings over to the default actions.
-#
-# Revision 1.176  2008/09/21 13:24:37  fabiankeil
-# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
-#
-# Revision 1.175  2008/08/30 12:03:07  fabiankeil
-# Remove FEATURE_COOKIE_JAR.
-#
-# Revision 1.174  2008/07/18 17:50:47  fabiankeil
-# Fix whitespace.
-#
-# Revision 1.173  2008/06/18 18:28:42  fabiankeil
-# Remove PDF-related stuff.
-#
-# Revision 1.172  2008/06/17 16:16:08  fabiankeil
-# - Stop building text files nobody cares about.
-# - Update copyright year.
-#
-# Revision 1.171  2008/06/13 15:24:57  fabiankeil
-# Move previously inline'd Perl code for the config-file target
-# into a separate file, have it work with older perl releases,
-# clean it up a bit and fix the "underlining" code.
-#
-# Revision 1.170  2008/06/12 16:38:50  fabiankeil
-# Add third-level domain to URL in dok-get target.
-#
-# Revision 1.169  2008/06/09 17:28:31  fabiankeil
-# - Recommend https for releasing files.
-# - Fix a warning about datarootdir being ignored.
-#
-# Revision 1.168  2008/05/23 18:03:12  fabiankeil
-# - Shorten meta description inserted in dok-webserver
-#   and dok-index target.
-# - In config-file target, unset LANG for w3m as we
-#   might otherwise end up with multi-byte characters.
-#
-# Revision 1.167  2008/05/23 14:39:09  fabiankeil
-# Silence dok-user complaint about @# not being found.
-#
-# Revision 1.166  2008/05/23 14:04:57  fabiankeil
-# - Get config-file target working with more recent Perl
-#   versions. The generated file is still messed up, though.
-# - Fix comment typo.
-#
-# Revision 1.165  2008/05/22 16:57:23  fabiankeil
-# Fix coffee machine.
-#
-# Revision 1.164  2008/05/22 10:26:26  fabiankeil
-# - Remove parsers.@OBJEXT@'s dependency on encode.h.
-# - Include Emacs backup files in tidy target again.
-#
-# Revision 1.163  2008/05/04 18:01:53  fabiankeil
-# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
-#
-# Revision 1.162  2008/03/30 13:31:42  fabiankeil
-# Add DESTDIR support for the uninstall target.
-#
-# Revision 1.161  2008/03/30 13:19:13  fabiankeil
-# Add DESTDIR support for the install target. Closes PR#1910612.
-# Patch by Radoslaw Zielinski with minor modifications.
-#
-# Revision 1.160  2008/03/27 18:27:19  fabiankeil
-# Remove kill-popups action.
-#
-# Revision 1.159  2008/03/21 11:13:53  fabiankeil
-# Only gather host information if it's actually needed.
-# Also move the code out of accept_connection() so it's less likely
-# to delay other incoming connections if the host is misconfigured.
-#
-# Revision 1.158  2007/12/11 21:29:25  fabiankeil
-# Fix dependency list for cgiedit.c.
-#
-# Revision 1.157  2007/12/10 02:28:02  hal9
-# Unset $LANG for text processing of docs so we get pure text.
-#
-# Revision 1.156  2007/11/15 03:17:43  hal9
-# Some workaround changes to the config file perl stuff and comments, which is
-# broken here all by itself on perl 5.8.8.
-#
-# Revision 1.155  2007/09/22 16:23:25  fabiankeil
-# Update copyright line.
-#
-# Revision 1.154  2007/02/07 11:52:40  fabiankeil
-# Fix suse-dist as described in BR#1654052.
-# (I didn't test it, but it's done the same
-# way in redhat-dist which is known to work).
-#
-# Revision 1.153  2007/01/07 07:36:36  joergs
-# Added AmigaOS4 support.
-#
-# Revision 1.152  2006/12/13 14:53:51  etresoft
-# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
-#
-# Revision 1.151  2006/11/30 01:08:55  hal9
-# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
-#
-# Revision 1.150  2006/10/25 11:55:45  fabiankeil
-# Fix sed regexes for rewriting "confdir ." and "logdir .".
-# Thanks to Darel Henman for reporting this.
-#
-# Revision 1.149  2006/10/11 01:40:28  hal9
-# Apply patch from  Neil McCalden to fix syntax issue.
-#
-# Revision 1.148  2006/09/26 10:57:58  hal9
-# Including Karsten's patch to fix make create-snapshot.
-#
-# Revision 1.147  2006/09/13 01:25:16  hal9
-# Make sure install forces in new default.action, default.filter, and
-# standard.filter. These are privoxy files, not user files.
-#
-# Revision 1.146  2006/09/08 23:57:19  hal9
-# User manual images are now user-manual doc directory, and fix make install
-# target accordingly.
-#
-# Revision 1.145  2006/09/08 02:32:00  hal9
-# Various changes to implement building and installing docs to be compatible
-# with the new "user-manual" settings in config from Roland. Docbook does not
-# seem to like dealing with more than one css file, so workaround that here.
-# Change 'make install' so it provides p_doc.css in the user-manual doc
-# directory so that functions well, and lastly modify 'make install' so that the
-# PATH is automatically set, and the 'user-manual' directive should done during
-# the install.
-#
-# Revision 1.144  2006/09/07 22:53:20  hal9
-# Make sure config sgml build related artifacts are cleaned out.
-#
-# Revision 1.143  2006/09/02 15:59:40  hal9
-# Add to code status to make install output.
-#
-# Revision 1.142  2006/08/29 01:46:24  hal9
-# Add user.filter to $CONFIGS.
-#
-# Revision 1.141  2006/08/12 03:54:37  david__schmidt
-# Windows service integration
-#
-# Revision 1.140  2006/07/18 14:48:45  david__schmidt
-# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-# with what was really the latest development (the v_3_0_branch branch)
-#
-# Revision 1.104.2.28  2004/06/10 17:06:05  hal9
-# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
-# only place it is used.
-#
-# Revision 1.104.2.27  2004/02/07 16:11:10  oes
-# Make clobber remove the autom4te.cache dir.
-# Closes BR #889300
-#
-# Revision 1.104.2.26  2004/01/31 16:32:25  oes
-# Adding a check for an htmldoc variant from the debian diff
-#
-# Revision 1.104.2.25  2004/01/31 01:15:33  oes
-# Fixed a typo; updated copyright notice
-#
-# Revision 1.104.2.24  2003/12/03 10:30:02  oes
-# - Added new dependency: actions.c -> ssplit.h
-# - Excluded PDF docs from src tarball
-#
-# Revision 1.104.2.23  2003/04/20 17:28:52  hal9
-# Strip trailing spaces from config-file generation, bug #724596.
-#
-# Revision 1.104.2.22  2003/03/28 03:32:01  hal9
-# Minor changes for Privoxy home page:
-#  - Handle &copy; more sanely
-#  - include link to announce.txt
-# Also, disable 'make announce' target.
-#
-# Revision 1.104.2.21  2002/11/04 07:04:03  hal9
-# Catch up with main trunk install/uninstall. Quiet output, etc.
-#
-# Revision 1.104.2.20  2002/10/25 02:44:22  hal9
-# Port of make install, etc from main trunk. Needs testing! Add Slackware
-# support, and other related changes. Update related docs.
-#
-# Revision 1.104.2.19  2002/09/26 22:50:02  hal9
-# New user-manual examples in config-file are getting wrapped. Add warning.
-#
-# Revision 1.104.2.18  2002/08/23 12:22:40  oes
-# Added warning to broken install target
-#
-# Revision 1.104.2.17  2002/08/16 03:19:34  hal9
-# More (minor) cleanup of html before pdf processing to make some relative
-# links work as pdf -> pdf. Upload pdf as zip archive now.
-#
-# Revision 1.104.2.16  2002/08/14 16:43:27  hal9
-# Added pdf docs to make webserver target.
-#
-# Revision 1.104.2.15  2002/08/11 20:02:41  hal9
-# New targets for man page (make man) and pdf (make dok-pdf) targets.
-#
-# Revision 1.104.2.14  2002/08/10 11:19:37  oes
-# - Make -Ipcre (again) conditional on STATIC_PCRE
-# - $(RPMBUILD) -> $(RPM) for SuSE
-# - Add dependency: pcrs.o deps on config.h
-#
-# Revision 1.104.2.13  2002/08/07 15:13:54  hal9
-# Remove pdf2 target, and make it dok-shtml (single page html for pdf
-# conversion).
-#
-# Revision 1.104.2.12  2002/08/06 11:29:36  oes
-# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
-#
-# Revision 1.104.2.11  2002/07/30 19:38:11  hal9
-# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
-# *I think* it was supposed to be (was breaking upload targets since it was
-# set to RPM_VERSION).
-#
-# Revision 1.104.2.10  2002/07/27 22:56:53  kick_
-# cleanups of the redhat-srpm target
-#
-# Revision 1.104.2.9  2002/07/26 15:17:02  oes
-# - Added generation of default.action from defaul.action.master
-# - Deleted obsolete re_filterfile.txt generation
-#
-# Revision 1.104.2.8  2002/07/12 10:04:32  kick_
-# added helper targets to the makefile. They shouldn't break anything, but
-# make my life a lot easier.
-#
-# The new rpm has been splitted into two parts, one for package installation/
-# removal, one for package building.
-# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
-# by rpmbuild -ta  (this is backwards compatible)
-#
-# Revision 1.104.2.7  2002/06/07 00:23:47  hal9
-# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
-# thus breaking them completely.
-#
-# Revision 1.104.2.6  2002/06/02 03:26:25  hal9
-# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
-# index.html and team/index.html)
-#
-# Revision 1.104.2.5  2002/05/30 15:35:01  hal9
-# This is more cleanup on the make config-file target. Most issues for
-# automatic generation are taken care of. There are still some problems
-# that require hand editing. Namely, some of the examples that are > 80 chars.
-#
-# Revision 1.104.2.4  2002/05/29 02:12:17  hal9
-# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
-# new target is 'make config-file', _not_ make config.
-#
-# Revision 1.104.2.3  2002/05/29 02:05:48  hal9
-# 'make config' target added (WIP) for future generation of config file from
-# text in u-m so the two are in sync. New generated config, which requires
-# some hand editing for the time being.
-#
-# Revision 1.104.2.2  2002/05/28 02:32:55  hal9
-# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
-# not being cleaned up in doc/webserver.
-#
-# Revision 1.104.2.1  2002/05/26 17:19:34  hal9
-# Remove Table of Contents from readme with oes's dsl trick.
-#
-# Revision 1.104  2002/05/24 00:03:49  oes
-# Use p_doc.css for the Homepage for consistency
-#
-# Revision 1.103  2002/05/23 23:19:00  oes
-# Use dsl without TOC for the homepage
-#
-# Revision 1.102  2002/05/16 01:20:17  hal9
-# make announce target added.
-#
-# Revision 1.101  2002/05/15 12:28:46  oes
-# Trying to keep Hal happy :)
-#
-# Revision 1.100  2002/05/08 13:48:18  hal9
-# Ooops, that trashed JB v2.0.2 comment. Fixed.
-#
-# Revision 1.99  2002/05/08 13:42:07  hal9
-# This fixes the numbering problem on index.html in contact info section (.1.). Using
-# perl, since its way too convoluted to try to fix proper with docbook.
-#
-# Revision 1.98  2002/05/03 14:33:06  oes
-# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
-#
-# Revision 1.97  2002/04/27 20:27:43  swa
-# no longer needed due to new
-# PACKAGE_VERSION process
-#
-# Revision 1.96  2002/04/27 17:44:32  morcego
-# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
-# - Using the RM macro everywhere rm is called (either we use, or don't)
-# - Same for RPM
-#
-# Revision 1.95  2002/04/27 15:37:25  swa
-# replacing directory in document creation process
-# no longer necessary.
-#
-# Revision 1.94  2002/04/27 08:23:29  swa
-# pdf process reviewed and cleaned up
-#
-# Revision 1.93  2002/04/27 04:55:53  morcego
-# privoxy-cl.spec now gets removed by clobber target
-#
-# Revision 1.92  2002/04/27 04:53:40  morcego
-# Adding --exclude "PACKAGERS" to every tar command that applies (not for
-#   webserver target)
-#
-# Revision 1.91  2002/04/27 04:44:51  morcego
-# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
-#   the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
-# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
-#   conectiva-upload
-# genclspec.sh  : New file to generate, from privoxy-rh.spec, a specfile
-#   for Conectiva Linux
-#
-# Revision 1.90  2002/04/26 17:46:53  swa
-# be consistent
-#
-# Revision 1.89  2002/04/26 17:20:54  swa
-# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
-#
-# Revision 1.88  2002/04/25 19:13:57  morcego
-# Removed RPM release number declaration on configure.in
-# Changed makefile to use given value for RPM_PACKAGEV when on uploading
-# targets (will produce an error, explaining who to do it, if no value
-# if provided).
-#
-# Revision 1.87  2002/04/23 14:10:59  swa
-# now create pdf documents
-#
-# Revision 1.86  2002/04/15 04:30:27  hal9
-# Missed two -pi.bak's on perl/cygwin problem.
-#
-# Revision 1.85  2002/04/14 01:05:34  hal9
-# Revert dok-webserver change for SF logo.
-#
-# Revision 1.84  2002/04/13 22:43:25  hal9
-# -Fix dok-webserver for SF logo (more perl).
-# -Change all perl -pi to perl -pi.bak for Cygwin problem.
-#
-# Revision 1.83  2002/04/12 09:39:25  oes
-# Excluding yet more files from tarball; making dist warning yet more scary
-#
-# Revision 1.82  2002/04/11 21:07:11  oes
-# Excluding more files from tarball build
-#
-# Revision 1.81  2002/04/11 14:40:27  oes
-# Fixed typo -- Thanks, Moritz!
-#
-# Revision 1.80  2002/04/11 12:50:00  oes
-# Fixed tarball-dist target
-#
-# Revision 1.79  2002/04/11 06:49:28  oes
-# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
-#
-# Revision 1.78  2002/04/09 13:37:11  sarantis
-# fix tar options typo
-#
-# Revision 1.77  2002/04/09 13:28:53  swa
-# build suse and gen-dist with html docs
-#
-# Revision 1.76  2002/04/08 22:43:41  oes
-# Fix: Include dotfiles in fixing webserver permissions
-#
-# Revision 1.75  2002/04/08 22:14:59  oes
-# Silencing tar warnings in the web* targets
-#
-# Revision 1.74  2002/04/08 15:22:44  hal9
-# This has finishing touches for dok building. Should be ready to go.
-# -The main doc build is now 'make dok', should work on Redhat too.
-# -Removed man page from main doc build. It is built separately due to
-#  perl scripts that most aren't likely to have.
-#
-# Revision 1.73  2002/04/08 14:03:24  oes
-# oes for al: Fix install target
-#
-# Revision 1.72  2002/04/08 13:42:11  oes
-# Added safety check to *-dist targets; fixed permissions for feedback logfile
-#
-# Revision 1.71  2002/04/07 20:32:03  hal9
-# -Add meta data kludge for make dok-webserver via $(PERL).
-# -Add subdirs for 'make dok-release'.
-#
-# Revision 1.70  2002/04/07 08:59:40  swa
-# generated files. do NOT edit.
-# fixed directory bug in makefile.
-#
-# Revision 1.69  2002/04/07 08:10:47  swa
-# create some of the webserver docs
-# automatically (in particular if
-# those docs recycle other documentation
-# fragments). Now committed webserver's
-# index file.
-#
-# Revision 1.68  2002/04/07 07:58:11  swa
-# create some of the webserver docs
-# automatically (in particular if
-# those docs recycle other documentation
-# fragments)
-#
-# Revision 1.67  2002/04/07 05:31:42  hal9
-# Add 'dok-release' target:
-# -Set doc entities to VERSION and CODE_STATUS during make.
-# -Set doc conditional content flags (stable vs non-stable).
-# A separate target for the time being but needs to be incorporated into
-# dok build at some point.
-# -Filter out a spurious ^G from new man page > html converion in man2html.
-#
-# Revision 1.66  2002/04/06 20:28:21  jongfoster
-# Prettifying groff2html.
-# Using GNU Make's conditional makefile feature rather than shell "if"s.
-# (The shell "if"s were hiding errors)
-# "perl" -> "$(PERL)"
-# Spaces->tabs in a couple of places.
-#
-# Revision 1.65  2002/04/06 05:16:39  hal9
-# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
-# -Both of these will soon be generated files.
-#
-# Revision 1.64  2002/04/04 22:14:51  oes
-# No longer rely on find honoring -iname
-#
-# Revision 1.63  2002/04/04 21:06:22  swa
-# cosmetics.
-#
-# Revision 1.62  2002/04/04 20:49:50  swa
-# attempt to consolidate the
-# different dokbook versions.
-#
-# Revision 1.61  2002/04/04 19:18:21  swa
-# readme was leftover directory. use w3m instead
-# of lynx to be consistent among developers. use
-# consistent target naming.
-#
-# Revision 1.60  2002/04/04 12:25:41  oes
-# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
-#
-# Revision 1.59  2002/04/04 08:32:45  swa
-# wrong name for tarball-dist target. further fixed content of tarball dist
-#
-# Revision 1.58  2002/04/04 06:32:58  hal9
-# New dok targets for make readme.
-#
-# Revision 1.57  2002/04/04 00:36:36  gliptak
-# always use pcre for matching
-#
-# Revision 1.56  2002/04/03 22:28:03  gliptak
-# Removed references to gnu_regex
-#
-# Revision 1.55  2002/04/03 19:54:29  swa
-# freebsd tested to work. attempt to move tarball dist target forward
-#
-# Revision 1.54  2002/04/03 14:54:07  oes
-# Standard clean and clobber semantics II
-#
-# Revision 1.53  2002/04/03 14:19:16  oes
-# Standard clean and clobber semantics
-#
-# Revision 1.52  2002/04/03 02:56:18  hal9
-# Revert previous FAQ numbering kludge.
-#
-# Revision 1.51  2002/04/02 13:03:56  oes
-# Added fix for webserver permissions
-#
-# Revision 1.50  2002/04/02 03:46:24  hal9
-# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
-# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
-#
-# Revision 1.49  2002/03/30 22:20:12  swa
-# cd didn't work. neither did find.
-#
-# Revision 1.48  2002/03/30 19:04:06  swa
-# people release differently. no good.
-# I want to make parts of the docs only.
-#
-# Revision 1.47  2002/03/30 09:05:21  swa
-# better packaging. better rpm building.
-# tar failed on sun (no exclude there).
-#
-# Revision 1.46  2002/03/29 20:09:01  swa
-# al's patch
-#
-# Revision 1.45  2002/03/29 19:45:45  swa
-# for lazy swa
-#
-# Revision 1.44  2002/03/29 17:42:44  gliptak
-# Correcting for Solaris tar limitations
-#
-# Revision 1.43  2002/03/29 07:40:03  swa
-# fixed make webserver. doh
-#
-# Revision 1.42  2002/03/29 06:59:04  swa
-# other users could not modify files on webserver
-#
-# Revision 1.41  2002/03/28 20:43:00  swa
-# set make correctly
-#
-# Revision 1.40  2002/03/28 04:22:44  hal9
-# More on man2html stuff.
-#
-# Revision 1.39  2002/03/28 01:04:14  hal9
-# More man2html stuff for docs.
-#
-# Revision 1.38  2002/03/27 16:02:30  swa
-# have a generic target
-#
-# Revision 1.37  2002/03/27 15:30:26  swa
-# have a consistent appearance
-#
-# Revision 1.36  2002/03/27 14:58:08  swa
-# can be used by mutilple targets
-#
-# Revision 1.35  2002/03/27 14:53:19  swa
-# added solaris-dist
-#
-# Revision 1.34  2002/03/27 10:30:11  swa
-# we want a html man file on the webserver
-#
-# Revision 1.33  2002/03/27 03:05:35  hal9
-# Added man2html target for docs (redhat-dok only for now)
-#
-# Revision 1.32  2002/03/26 22:29:54  swa
-# we have a new homepage!
-#
-# Revision 1.31  2002/03/26 14:00:18  swa
-# fixed make tarball, tarball-dist, tarball-clean
-#
-# Revision 1.30  2002/03/25 12:52:25  swa
-# new targets
-#
-# Revision 1.29  2002/03/24 17:03:55  jongfoster
-# Name change
-#
-# Revision 1.28  2002/03/24 16:19:48  swa
-# configure needs to be generated.
-#
-# Revision 1.27  2002/03/24 16:13:57  swa
-# generated files are a nono in cvs
-#
-# Revision 1.26  2002/03/24 15:36:02  swa
-# did not build.
-#
-# Revision 1.25  2002/03/24 14:31:08  swa
-# remove more crappy files. set RPM
-# release version correctly.
-#
-# Revision 1.24  2002/03/24 14:19:55  swa
-# set rpm package release in configure.in. nowhere else.
-#
-# Revision 1.23  2002/03/24 13:06:49  swa
-# suse-clean now runs fine
-#
-# Revision 1.22  2002/03/24 12:56:21  swa
-# name change related issues.
-#
-# Revision 1.21  2002/03/24 12:43:57  swa
-# name change
-#
-# Revision 1.20  2002/03/24 11:39:17  jongfoster
-# Renaming config files
-#
-# Revision 1.19  2002/03/22 20:53:03  morcego
-# - Ongoing process to change name to JunkbusterNG
-# - configure/configure.in: no change needed
-# - GNUmakefile.in:
-#         - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
-#         - PROGRAM    = jbng@EXEEXT@
-#         - rh-spec now references as junkbusterng-rh.spec
-#         - redhat-upload: references changed to junkbusterng-* (package names)
-#         - tarball-dist: references changed to JunkbusterNG-distribution-*
-#         - tarball-src: now JunkbusterNG-*
-#         - install: initscript now junkbusterng.init and junkbusterng (when
-#                    installed)
-# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
-# - junkbusterng.spec:
-#         - References to the expression ijb where changed where possible
-#         - New package name: junkbusterng (all in lower case, acording to
-#           the LSB recomendation)
-#         - Version changed to: 2.9.13
-#         - Release: 1
-#         - Added: junkbuster to obsoletes and conflicts (Not sure this is
-#           right. If it obsoletes, why conflict ? Have to check it later)
-#         - Summary changed: Stefan, please check and aprove it
-#         - Changes description to use the new name
-#         - Sed string was NOT changed. Have to wait to the manpage to
-#           change first
-#         - Keeping the user junkbuster for now. It will require some aditional
-#           changes on the script (scheduled for the next specfile release)
-#         - Added post entry to move the old logfile to the new log directory
-#         - Removing "chkconfig --add" entry (not good to have it automaticaly
-#           added to the startup list).
-#         - Added preun section to stop the service with the old name, as well
-#           as remove it from the startup list
-#         - Removed the chkconfig --del entry from the conditional block on
-#           the preun scriptlet (now handled on the %files section)
-# - junkbuster.init: renamed to junkbusterng.init
-# - junkbusterng.init:
-#         - Changed JB_BIN to jbng
-#         - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
-#           be used where necessary (config dir)
-#
-# Aditional notes:
-# - The config directory is /etc/junkbuster yet. Have to change it on the
-# specfile, after it is changes on the code
-# - The only files that got renamed on the cvs tree were the rh specfile and
-# the init file. Some file references got changes on the makefile and on the
-# rh-spec (as listed above)
-#
-# Revision 1.18  2002/03/21 23:00:00  swa
-# want to autogenerate stuff.
-#
-# Revision 1.17  2002/03/19 19:30:04  morcego
-# - Fixing stylesheet checking on configure. If it is found, no further checks
-#   should be done
-#
-# - configure will now check for db2html or docbook2html (should work now
-#   on SuSe without the docbktls package)
-#
-# Revision 1.16  2002/03/14 22:32:32  hal9
-# Bumped the RPM version.
-#
-# Revision 1.15  2002/03/08 20:00:28  swa
-# some leftovers.
-#
-# Revision 1.14  2002/03/07 18:25:56  swa
-# synced redhat and suse build process
-#
-# Revision 1.13  2002/03/07 17:17:56  oes
-# (Hopefully) fixed for older make versions
-#
-# Revision 1.12  2002/03/07 15:28:27  swa
-# more informative
-#
-# Revision 1.11  2002/03/06 14:33:18  sarantis
-# Use proper temp file, not "abc".
-#
-# Revision 1.10  2002/03/06 14:19:35  sarantis
-# Cleanup PID_FILE_PATH from redhat-dist target
-#
-# Revision 1.9  2002/03/05 17:31:11  morcego
-# Search for docbook.dsl. Should solve portability problems for SuSe.
-#
-# Revision 1.8  2002/03/05 14:07:42  morcego
-# configure now detects rpm topdir, and change GNUmakefile acordingly
-#    (based on sugestion by Sarantis Paskalis)
-#
-# Revision 1.7  2002/03/05 13:43:28  morcego
-# Checking for text browser, so redhat-dok can work.
-#
-# Revision 1.6  2002/03/05 13:10:51  morcego
-# Changes to implement redhat-dok (Hal Burgiss)
-# Changes to make it work on other distros and out-of-the-shelf configurations
-#
-# Revision 1.5  2002/02/27 15:30:39  hal9
-# Reset $(RPM_PACKAGEV) to 1 (was 2)
-#
-# Revision 1.4  2002/01/17 21:44:04  jongfoster
-# Adding urlmatch.[ch]
-#
-# Revision 1.3  2002/01/04 15:26:08  oes
-# Added tarball-src target
-#
-# Revision 1.2  2001/12/30 14:07:31  steudten
-# - Add signal handling (unix)
-# - Add SIGHUP handler (unix)
-# - Add creation of pidfile (unix)
-# - Add action 'top' in rc file (RH)
-# - Add entry 'SIGNALS' to manpage
-# - Add exit message to logfile (unix)
-#
-# Revision 1.1  2001/12/01 11:22:57  jongfoster
-# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
-# make break in a more obvious way.
-# Adding .PHONY section.
-#
-# Revision 1.40  2001/12/01 00:24:11  jongfoster
-# Renaming various config files
-# Fixing CR->CRLF under Win32 (I hope)
-#
-# Revision 1.39  2001/11/06 12:07:30  steudten
-# Add --clean for building rpm in target redhat-dist.
-#
-# Revision 1.38  2001/11/05 21:35:23  steudten
-# Complete rewrite for the 'redhat-dist' target.
-# Checks for writeable RPM build directories for calling user.
-# So you must not be root, just set the modes to 1777 to
-# build a RH package.
-# Fix the upload-target to be arch independant.
-# Add target for 'solaris-dist' - coming soon.
-#
-# Revision 1.37  2001/11/01 00:52:04  hal9
-# Redhat-upload stuff per Stefan.
-#
-# Revision 1.36  2001/10/31 19:26:13  swa
-# automate process of uploading new releases
-# to sf.
-#
-# Revision 1.35  2001/10/15 22:14:59  joergs
-# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
-#  the general CFLAGS already.
-#
-# Revision 1.34  2001/10/15 18:28:06  steudten
-# remove config.cache for target clobber.
-# Cleanup make dist for RH and S.u.S.E.
-#
-# Revision 1.33  2001/10/10 12:43:33  oes
-# Added ugly hack to make install target work at least for some setups.
-#
-# Revision 1.32  2001/10/09 22:38:19  jongfoster
-# Correcting actionsfile filename for Win32 INI build
-#
-# Revision 1.31  2001/09/23 10:13:48  swa
-# upload process established. run make webserver and
-# the documentation is moved to the webserver. documents
-# are now linked correctly.
-#
-# Revision 1.30  2001/09/19 17:55:49  oes
-# Fixed CFLAGS
-#
-# Revision 1.29  2001/09/16 17:34:27  jongfoster
-# Removing showargs.[ch], adding cgi(simple|edit).[ch]
-# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
-# of build problems.
-#
-# Revision 1.28  2001/09/13 15:19:08  swa
-# we want text files as well.
-#
-# Revision 1.27  2001/09/13 13:11:37  steudten
-#
-# Replace DEBUG_CFLAGS with OTHER_CFLAGS
-#
-# Revision 1.26  2001/09/12 23:44:54  david__schmidt
-# Mac OSX (Darwin) support added.
-#
-# Revision 1.25  2001/09/12 22:55:45  joergs
-# AmigaOS support added.
-#
-# Revision 1.24  2001/09/12 17:28:59  david__schmidt
-#
-# OS/2 port: update autoconf'd support for the platform.
-#
-# Revision 1.23  2001/09/12 16:28:42  swa
-# added "make dok" section to generate html pages from
-# the sgml source documents. note that the we do not want
-# generated stuff in cvs.
-#
-# Revision 1.22  2001/09/10 16:31:23  swa
-# buildroot definition in the specfile fucks up the build
-# process under suse. hence I moved it to the "rpm -ta"
-# command
-#
-# Revision 1.21  2001/09/10 11:12:49  oes
-# Turning on -Wall
-#
-# Revision 1.20  2001/08/02 22:04:29  jongfoster
-# Removing some remaining references to obsolete w32rulesdlg.[ch]
-#
-# Revision 1.19  2001/07/30 22:14:03  jongfoster
-# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
-#
-# Revision 1.18  2001/07/29 17:09:17  jongfoster
-# Major changes to build system in order to fix these bugs:
-# - pthreads under Linux was broken - changed -lpthread to -pthread
-# - Compiling in MinGW32 mode under CygWin now correctly detects
-#   which shared libraries are available
-# - Solaris support (?) (Not tested under Solaris yet)
-#
-# Revision 1.17  2001/07/28 16:44:54  oes
-# Fixed sed LF->CRLF conversion and removed deprecated files
-#
-# Revision 1.16  2001/07/15 19:45:33  jongfoster
-# Added support for linking with POSIX threads library
-#
-# Revision 1.15  2001/07/13 13:48:07  oes
-#  - Moved STATIC #define for pcre to (ac)config.h
-#  - Made -Ipcre depandant on static pcre compilation to
-#    avoid version conflicts
-#  - Included compilation and depandancies for new deanimate.c
-#  - Made changes to the pcre/pcreposix/pcrs build process
-#    as required by the new library autodetection in
-#    configure.in
-#
-# Revision 1.14  2001/07/01 16:27:44  oes
-# Fixed misplaced dependancy
-#
-# Revision 1.13  2001/06/29 13:18:36  oes
-# - added depandancy of filters.o on cgi.h
-#
-# Revision 1.12  2001/06/12 17:15:56  swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %configure confuses rpm, etc.
-#
-# Revision 1.11  2001/06/11 11:26:35  sarantis
-# RPM version should be the same as ijbswa version.  The rpm release is
-# specified in the specfile.
-#
-# Revision 1.10  2001/06/07 17:27:45  swa
-# added suse build section
-#
-# Revision 1.9  2001/06/04 18:31:58  swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
-#
-# Revision 1.8  2001/06/04 10:44:57  swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
-#
-# Revision 1.7  2001/06/03 17:09:09  swa
-# swa for oes: reversed my earlier change
-#
-# Revision 1.6  2001/06/03 17:07:27  swa
-# swa for oes
-#
-# Revision 1.5  2001/06/03 13:57:26  swa
-# compile cgi.c (for andreas' GUI)
-#
-# Revision 1.4  2001/05/31 21:18:45  jongfoster
-# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
-#
-# Revision 1.3  2001/05/29 20:02:48  joergs
-# Changes for AmigaOS added.
-#
-# Revision 1.2  2001/05/17 22:23:23  oes
-#  - Added auto-generation of CRLFs for Win32 config files
-#  - Added comment-prefix to all Win32-only options in the config file
-#    and provided auto stripping of this prefix for the Win32 platform by make
-#
-# Revision 1.1.1.1  2001/05/15 13:59:00  oes
-# Initial import of version 2.9.3 source tree
-#
-#
diff --git a/external/privoxy/INSTALL b/external/privoxy/INSTALL
deleted file mode 100644
index f17eadb..0000000
--- a/external/privoxy/INSTALL
+++ /dev/null
@@ -1,173 +0,0 @@
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/INSTALL,v $
- *
- * Purpose     :  INSTALL file to help with installing from source.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
- *                USA
- *
- *********************************************************************/
-   
-
--------------------------------------------------------------------------------
-
-To build Privoxy from source, autoconf, GNU make (gmake), and, of course, a C
-compiler like gcc are required.
-
-When building from a source tarball, first unpack the source:
-
- tar xzvf privoxy-3.0.12-stable-src.tar.gz
- cd privoxy-3.0.12-stable
-
-
-For retrieving the current CVS sources, you'll need a CVS client installed.
-Note that sources from CVS are typically development quality, and may not be
-stable, or well tested. To download CVS source, check the Sourceforge
-documentation, which might give commands like:
-
-  cvs -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa login
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co current
-  cd current
-
-
-This will create a directory named current/, which will contain the source
-tree.
-
-You can also check out any Privoxy "branch", just exchange the current name
-with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs tree).
-
-It is also strongly recommended to not run Privoxy as root. You should
-configure/install/run Privoxy as an unprivileged user, preferably by creating a
-"privoxy" user and group just for this purpose. See your local documentation
-for the correct command line to do add new users and groups (something like
-adduser, but the command syntax may vary from platform to platform).
-
-/etc/passwd might then look like:
-
-  privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell
-
-
-And then /etc/group, like:
-
-  privoxy:*:7777:
-
-
-Some binary packages may do this for you.
-
-Then, to build from either unpacked tarball or CVS source:
-
- autoheader
- autoconf
- ./configure      # (--help to see options)
- make             # (the make from GNU, sometimes called gmake)
- su               # Possibly required
- make -n install  # (to see where all the files will go)
- make -s install  # (to really install, -s to silence output)
-
-
-Using GNU make, you can have the first four steps automatically done for you by
-just typing:
-
-  make
-
-
-in the freshly downloaded or unpacked source directory.
-
-To build an executable with security enhanced features so that users cannot
-easily bypass the proxy (e.g. "Go There Anyway"), or alter their own
-configurations, configure like this:
-
- ./configure  --disable-toggle  --disable-editor  --disable-force
-
-
-Then build as above. In Privoxy 3.0.7 and later, all of these options can also
-be disabled through the configuration file.
-
-WARNING: If installing as root, the install will fail unless a non-root user or
-group is specified, or a privoxy user and group already exist on the system. If
-a non-root user is specified, and no group, then the installation will try to
-also use a group of the same name as "user". If a group is specified (and no
-user), then the support files will be installed as writable by that group, and
-owned by the user running the installation.
-
-configure accepts --with-user and --with-group options for setting user and
-group ownership of the configuration files (which need to be writable by the
-daemon). The specified user must already exist. When starting Privoxy, it must
-be run as this same user to insure write access to configuration and log files!
-
-Alternately, you can specify user and group on the make command line, but be
-sure both already exist:
-
- make -s install  USER=privoxy GROUP=privoxy
-
-
-The default installation path for make install is /usr/local. This may of
-course be customized with the various ./configure path options. If you are
-doing an install to anywhere besides /usr/local, be sure to set the appropriate
-paths with the correct configure options (./configure --help). Non-privileged
-users must of course have write access permissions to wherever the target
-installation is going.
-
-If you do install to /usr/local, the install will use sysconfdir=$prefix/etc/
-privoxy by default. All other destinations, and the direct usage of
---sysconfdir flag behave like normal, i.e. will not add the extra privoxy
-directory. This is for a safer install, as there may already exist another
-program that uses a file with the "config" name, and thus makes /usr/local/etc
-cleaner.
-
-If installing to /usr/local, the documentation will go by default to $prefix/
-share/doc. But if this directory doesn't exist, it will then try $prefix/doc
-and install there before creating a new $prefix/share/doc just for Privoxy.
-
-Again, if the installs goes to /usr/local, the localstatedir (ie: var/) will
-default to /var instead of $prefix/var so the logs will go to /var/log/privoxy
-/, and the pid file will be created in /var/run/privoxy.pid.
-
-make install will attempt to set the correct values in config (main
-configuration file). You should check this to make sure all values are correct.
-If appropriate, an init script will be installed, but it is up to the user to
-determine how and where to start Privoxy. The init script should be checked for
-correct paths and values, if anything other than a default install is done.
-
-If install finds previous versions of local configuration files, most of these
-will not be overwritten, and the new ones will be installed with a "new"
-extension. default.action and default.filter will be overwritten. You will then
-need to manually update the other installed configuration files as needed. The
-default template files will be overwritten. If you have customized, local
-templates, these should be stored safely in a separate directory and defined in
-config by the "templdir" directive. It is of course wise to always back-up any
-important configuration files "just in case". If a previous version of Privoxy
-is already running, you will have to restart it manually.
-
-For more detailed instructions on how to build Redhat RPMs, Windows
-self-extracting installers, building on platforms with special requirements
-etc, please consult the developer manual.
-
-The simplest command line to start Privoxy is $path/privoxy --user=privoxy
-$path/etc/privoxy/config. See privoxy --usage, or the man page, for other
-options, and configuration.
-
diff --git a/external/privoxy/LICENSE b/external/privoxy/LICENSE
deleted file mode 100644
index d511905..0000000
--- a/external/privoxy/LICENSE
+++ /dev/null
@@ -1,339 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
diff --git a/external/privoxy/Makefile b/external/privoxy/Makefile
deleted file mode 100644
index ed6d7ac..0000000
--- a/external/privoxy/Makefile
+++ /dev/null
@@ -1,108 +0,0 @@
-# $Id: Makefile,v 1.11 2006/07/18 14:48:45 david__schmidt Exp $
-#
-# Written by and Copyright (C) 2001 the SourceForge
-# Privoxy team. http://www.privoxy.org/
-#
-# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and 
-# Junkbusters Corporation.  http://www.junkbusters.com
-#
-# This program is free software; you can redistribute it 
-# and/or modify it under the terms of the GNU General
-# Public License as published by the Free Software
-# Foundation; either version 2 of the License, or (at
-# your option) any later version.
-#
-# This program is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.  See the GNU General Public
-# License for more details.
-#
-# The GNU General Public License should be included with
-# this file.  If not, you can view it at
-# http://www.gnu.org/copyleft/gpl.html
-# or write to the Free Software Foundation, Inc., 59
-# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# $Log: Makefile,v $
-# Revision 1.11  2006/07/18 14:48:45  david__schmidt
-# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-# with what was really the latest development (the v_3_0_branch branch)
-#
-# Revision 1.5.2.2  2002/10/25 02:44:23  hal9
-# Port of make install, etc from main trunk. Needs testing! Add Slackware
-# support, and other related changes. Update related docs.
-#
-# Revision 1.5.2.1  2002/08/05 17:46:13  oes
-# Change make to gmake to fix auto-build on Solaris
-#
-# Revision 1.5  2002/04/11 12:51:34  oes
-# Bugfix
-#
-# Revision 1.4  2002/04/09 16:38:10  oes
-# Added option to run the whole build process
-#
-# Revision 1.3  2002/03/26 22:29:54  swa
-# we have a new homepage!
-#
-# Revision 1.2  2002/03/24 13:25:42  swa
-# name change related issues
-#
-# Revision 1.1  2001/12/01 11:24:29  jongfoster
-# Will display a warning if non-GNU make is used
-#
-#
-
-#############################################################################
-
-GNU_MAKE_CMD = gmake
-MAKE_CMD     = make
-
-error:
-	@if [ -f GNUmakefile ]; then \
-	    echo "***"; \
-	    echo "*** You are not using the GNU version of Make - maybe it's called gmake"; \
-	    echo "*** or it's in a different PATH? Please read INSTALL." ; \
-	    echo "***"; \
-	    exit 1; \
-	 elif test -n "$(HOST_ARCH)"  && test -z "$(MAKE_VERSION)" ; then \
-	    echo "***"; \
-	    echo "*** You are not using GNU Make on Solaris, please make sure you do" ; \
-	    echo "*** and re-run 'make' "; \
-	    echo "***"; \
-	    exit 1 ; \
-	 elif test -n "$(MACHINE_ARCH)"  && test -z "$(MAKE_VERSION)" ; then \
-	    echo "***"; \
-	    echo "*** You are not using GNU Make on FreeBSD, please make sure you do" ; \
-	    echo "*** and re-run 'make' "; \
-	    echo "***"; \
-	    exit 1 ; \
-	 else \
-	    echo "***"; \
-	    echo "*** To build this program, you must run"; \
-	    echo "*** autoheader && autoconf && ./configure and then run GNU make."; \
-	    echo "***"; \
-	    echo -n "*** Shall I do this for you now? (y/n) "; \
-	    read answer; \
-	    if [ "$$answer" = "y" ]; then \
-		autoheader && autoconf && ./configure || exit 1; \
-	  	if $(GNU_MAKE_CMD) -v |grep GNU >/dev/null 2>/dev/null; then \
-		   $(GNU_MAKE_CMD) ;\
-		elif $(MAKE_CMD) -v |grep GNU >/dev/null 2>/dev/null; then \
-		   $(MAKE_CMD) ;\
-		else \
-		   echo "Neither 'make' nor 'gmake' are GNU compatible!" ; \
-		   echo "Please read INSTALL." ; \
-		   exit 1 ; \
-		fi ;\
-	    fi; \
-	 fi
-
-.PHONY: error
-
-#############################################################################
-
-## Local Variables:
-## tab-width: 3
-## end:
diff --git a/external/privoxy/README b/external/privoxy/README
deleted file mode 100644
index a145e81..0000000
--- a/external/privoxy/README
+++ /dev/null
@@ -1,280 +0,0 @@
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/README,v $
- *
- * Purpose     :  README file to give a short intro.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009  the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
- *                USA
- *
- *********************************************************************/
-
-This README is included with Privoxy 3.0.12. See http://www.privoxy.org/ for
-more information. The current code maturity level is "stable".
-
--------------------------------------------------------------------------------
-
-Privoxy is a non-caching web proxy with advanced filtering capabilities for
-enhancing privacy, modifying web page data and HTTP headers, controlling
-access, and removing ads and other obnoxious Internet junk. Privoxy has a
-flexible configuration and can be customized to suit individual needs and
-tastes. It has application for both stand-alone systems and multi-user
-networks.
-
-Privoxy is Free Software and licensed under the GPL2.
-
-Privoxy is an associated project of Software in the Public Interest (SPI).
-Donations are welcome.
-
--------------------------------------------------------------------------------
-
-1. IMPORTANT CHANGES
-
-March 2009, Privoxy 3.0.12 is released.
-
-This is primarily a bug fix release. See the "ChangeLog", and the "What's New"
-section and the "Upgrader's Notes" in the User Manual for details.
-
-February 2009, Privoxy 3.0.11 is released.
-
-As usual there are changes that effect the configuration. See the "ChangeLog",
-and the "What's New" section and the "Upgrader's Notes" in the User Manual for
-details and specifics.
-
-This is a stable release, and marks a departure for Privoxy development.
-
-Previously, odd numbered releases were considered beta versions and were only
-released at the end of the development cycle when the code was already believed
-to be stable. Usually it was, so the stable release contained pretty much the
-same code, but got a higher version number. In the future we intend to release
-several snapshots between stable releases. There will probably still be about
-two stable releases per year, but hopefully about six snapshots instead of the
-two betas we have now. The intentions is to make testing without CVS access
-easier.
-
--------------------------------------------------------------------------------
-
-2. INSTALL
-
-See the INSTALL file in this directory, for installing from raw source, and the
-User Manual, for all other installation types.
-
--------------------------------------------------------------------------------
-
-3. RUN
-
-privoxy [--help] [--version] [--no-daemon] [--pidfile PIDFILE] [--user USER
-[.GROUP]] [--chroot] [--pre-chroot-nslookup HOSTNAME ][config_file]
-
-See the man page or User Manual for an explanation of each option, and other
-configuration and usage issues.
-
-If no config_file is specified on the command line, Privoxy will look for a
-file named 'config' in the current directory (except Win32 which will look for
-'config.txt'). If no config_file is found, Privoxy will fail to start.
-
-Or for Red Hat and Fedora based distributions: /etc/rc.d/init.d/privoxy start
-
-Or Debian and Ubuntu: /etc/init.d/privoxy start
-
--------------------------------------------------------------------------------
-
-4. CONFIGURATION
-
-See: 'config', 'default.action', 'user.action', 'default.filter', and
-'user.filter'. 'user.action' and 'user.filter' are for personal and local
-configuration preferences. These are all well commented. Most of the magic is
-in '*.action' files. 'user.action' should be used for any actions
-customizations. On Unix-like systems, these files are typically installed in /
-etc/privoxy. On Windows, then wherever the executable itself is installed.
-There are many significant changes and advances from earlier versions. The User
-Manual has an explanation of all configuration options, and examples: http://
-www.privoxy.org/user-manual/.
-
-Be sure to set your browser(s) for HTTP/HTTPS Proxy at <IP>:<Port>, or whatever
-you specify in the config file under 'listen-address'. DEFAULT is
-localhost:8118. Note that Privoxy ONLY proxies HTTP (and HTTPS) traffic. Do not
-try it with FTP or other protocols for the simple reason it does not work.
-
-The actions list can be configured via the web interface accessed via http://
-p.p/, as well other options.
-
--------------------------------------------------------------------------------
-
-5. DOCUMENTATION
-
-There should be documentation in the 'doc' subdirectory. In particular, see the
-User Manual there, the FAQ, and those interested in Privoxy development, should
-look at developer-manual.
-
-The source and configuration files are all well commented. The main
-configuration files are: 'config', 'default.action', and 'default.filter'.
-
-Included documentation may vary according to platform and packager. All
-documentation is posted on http://www.privoxy.org, in case you don't have it,
-or can't find it.
-
--------------------------------------------------------------------------------
-
-6. CONTACTING THE DEVELOPERS, BUG REPORTING AND FEATURE REQUESTS
-
-We value your feedback. In fact, we rely on it to improve Privoxy and its
-configuration. However, please note the following hints, so we can provide you
-with the best support:
-
--------------------------------------------------------------------------------
-
-6.1. Get Support
-
-For casual users, our support forum at SourceForge is probably best suited:
-http://sourceforge.net/tracker/?group_id=11118&atid=211118
-
-All users are of course welcome to discuss their issues on the users mailing
-list, where the developers also hang around.
-
-Please don't sent private support requests to individual Privoxy developers,
-either use the mailing lists or the support trackers.
-
-Note that the Privoxy mailing lists are moderated. Posts from unsubscribed
-addresses have to be accepted manually by a moderator. This may cause a delay
-of several days and if you use a subject that doesn't clearly mention Privoxy
-or one of its features, your message may be accidentally discarded as spam.
-
-If you aren't subscribed, you should therefore spend a few seconds to come up
-with a proper subject. Additionally you should make it clear that you want to
-get CC'd. Otherwise some responses will be directed to the mailing list only,
-and you won't see them.
-
--------------------------------------------------------------------------------
-
-6.2. Reporting Problems
-
-"Problems" for our purposes, come in two forms:
-
-  * Configuration issues, such as ads that slip through, or sites that don't
-    function properly due to one Privoxy "action" or another being turned "on".
-
-  * "Bugs" in the programming code that makes up Privoxy, such as that might
-    cause a crash.
-
--------------------------------------------------------------------------------
-
-6.2.1. Reporting Ads or Other Configuration Problems
-
-Please send feedback on ads that slipped through, innocent images that were
-blocked, sites that don't work properly, and other configuration related
-problem of default.action file, to http://sourceforge.net/tracker/?group_id=
-11118&atid=460288, the Actions File Tracker.
-
-New, improved default.action files may occasionally be made available based on
-your feedback. These will be announced on the ijbswa-announce list and
-available from our the files section of our project page.
-
--------------------------------------------------------------------------------
-
-6.2.2. Reporting Bugs
-
-Please report all bugs through our bug tracker: http://sourceforge.net/tracker
-/?group_id=11118&atid=111118.
-
-Before doing so, please make sure that the bug has not already been submitted
-and observe the additional hints at the top of the submit form. If already
-submitted, please feel free to add any info to the original report that might
-help to solve the issue.
-
-Please try to verify that it is a Privoxy bug, and not a browser or site bug or
-documented behaviour that just happens to be different than what you expected.
-If unsure, try toggling off Privoxy, and see if the problem persists.
-
-If you are using your own custom configuration, please try the stock configs to
-see if the problem is configuration related. If you're having problems with a
-feature that is disabled by default, please ask around on the mailing list if
-others can reproduce the problem.
-
-If you aren't using the latest Privoxy version, the bug may have been found and
-fixed in the meantime. We would appreciate if you could take the time to
-upgrade to the latest version (or even the latest CVS snapshot) and verify that
-your bug still exists.
-
-Please be sure to provide the following information:
-
-  * The exact Privoxy version you are using (if you got the source from CVS,
-    please also provide the source code revisions as shown in http://
-    config.privoxy.org/show-version).
-
-  * The operating system and versions you run Privoxy on, (e.g. Windows XP
-    SP2), if you are using a Unix flavor, sending the output of "uname -a"
-    should do, in case of GNU/Linux, please also name the distribution.
-
-  * The name, platform, and version of the browser you were using (e.g.
-    Internet Explorer v5.5 for Mac).
-
-  * The URL where the problem occurred, or some way for us to duplicate the
-    problem (e.g. http://somesite.example.com/?somethingelse=123).
-
-  * Whether your version of Privoxy is one supplied by the Privoxy developers
-    via SourceForge, or if you got your copy somewhere else.
-
-  * Whether you are using Privoxy in tandem with another proxy such as Tor. If
-    so, please temporary disable the other proxy to see if the symptoms change.
-
-  * Whether you are using a personal firewall product. If so, does Privoxy work
-    without it?
-
-  * Any other pertinent information to help identify the problem such as config
-    or log file excerpts (yes, you should have log file entries for each action
-    taken).
-
-You don't have to tell us your actual name when filing a problem report, but
-please use a nickname so we can differentiate between your messages and the
-ones entered by other "anonymous" users that may respond to your request if
-they have the same problem or already found a solution.
-
-Please also check the status of your request a few days after submitting it, as
-we may request additional information. If you use a SF id, you should
-automatically get a mail when someone responds to your request.
-
-The appendix of the Privoxy User Manual also has helpful information on
-understanding actions, and action debugging.
-
--------------------------------------------------------------------------------
-
-6.3. Request New Features
-
-You are welcome to submit ideas on new features or other proposals for
-improvement through our feature request tracker at http://sourceforge.net/
-tracker/?atid=361118&group_id=11118.
-
--------------------------------------------------------------------------------
-
-6.4. Other
-
-For any other issues, feel free to use the mailing lists. Technically
-interested users and people who wish to contribute to the project are also
-welcome on the developers list! You can find an overview of all Privoxy-related
-mailing lists, including list archives, at: http://sourceforge.net/mail/?
-group_id=11118.
-
diff --git a/external/privoxy/acconfig.h b/external/privoxy/acconfig.h
deleted file mode 100644
index ea2792d..0000000
--- a/external/privoxy/acconfig.h
+++ /dev/null
@@ -1,495 +0,0 @@
-#ifndef CONFIG_H_INCLUDED
-#define CONFIG_H_INCLUDED
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/acconfig.h,v $
- *
- * Purpose     :  This file should be the first thing included in every
- *                .c file.  (Before even system headers).  It contains 
- *                #define statements for various features.  It was
- *                introduced because the compile command line started
- *                getting ludicrously long with feature defines.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: acconfig.h,v $
- *    Revision 1.36  2008/10/18 11:17:52  fabiankeil
- *    Connection keep-alive support is ready for testing,
- *    allow enabling it through the configure script.
- *
- *    Revision 1.35  2008/04/06 15:18:33  fabiankeil
- *    Oh well, rename the --enable-pcre-host-patterns option to
- *    --enable-extended-host-patterns as it's not really PCRE syntax.
- *
- *    Revision 1.34  2008/04/06 14:54:26  fabiankeil
- *    Use PCRE syntax in host patterns when configured
- *    with --enable-pcre-host-patterns.
- *
- *    Revision 1.33  2006/12/17 19:15:26  fabiankeil
- *    Added ./configure switch for FEATURE_GRACEFUL_TERMINATION.
- *
- *    Revision 1.32  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.27.2.4  2003/12/17 16:34:40  oes
- *    Cosmetics
- *
- *    Revision 1.27.2.3  2003/03/27 16:03:19  oes
- *    Another shot at Bug #707467
- *
- *    Revision 1.27.2.2  2003/03/21 14:39:12  oes
- *    Presumably fixed Bug #707467 by defining unix ifdef __unix__
- *
- *    Revision 1.27.2.1  2002/08/10 11:22:31  oes
- *    - Add two AC_DEFINEs that indicate if the pcre*.h headers
- *      are located in a pcre/ subdir to the include path.
- *
- *    Revision 1.27  2002/04/25 19:13:57  morcego
- *    Removed RPM release number declaration on configure.in
- *    Changed makefile to use given value for RPM_PACKAGEV when on uploading
- *    targets (will produce an error, explaining who to do it, if no value
- *    if provided).
- *
- *    Revision 1.26  2002/04/11 11:00:21  oes
- *    Applied Moritz' fix for socklen_t on Solaris
- *
- *    Revision 1.25  2002/04/06 20:38:01  jongfoster
- *    Renaming VC++ versions of config.h
- *
- *    Revision 1.24  2002/04/04 00:36:36  gliptak
- *    always use pcre for matching
- *
- *    Revision 1.23  2002/04/03 22:28:03  gliptak
- *    Removed references to gnu_regex
- *
- *    Revision 1.22  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.21  2002/03/24 14:31:08  swa
- *    remove more crappy files. set RPM
- *    release version correctly.
- *
- *    Revision 1.20  2002/03/24 13:46:44  swa
- *    name change related issue.
- *
- *    Revision 1.19  2002/03/24 13:25:42  swa
- *    name change related issues
- *
- *    Revision 1.18  2002/03/08 16:40:28  oes
- *    Added FEATURE_NO_GIFS
- *
- *    Revision 1.17  2002/03/04 17:52:44  oes
- *    Deleted PID_FILE_PATH
- *
- *    Revision 1.16  2002/01/10 12:36:18  oes
- *    Moved HAVE_*_R to acconfig.h, where they belong.
- *
- *    Revision 1.15  2001/12/30 14:07:31  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.14  2001/10/23 21:24:09  jongfoster
- *    Support for FEATURE_CGI_EDIT_ACTIONS
- *
- *    Revision 1.13  2001/10/07 15:30:41  oes
- *    Removed FEATURE_DENY_GZIP
- *
- *    Revision 1.12  2001/09/13 19:56:37  jongfoster
- *    Reverting to revision 1.10 - previous checking was majorly broken.
- *
- *    Revision 1.10  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.9  2001/07/29 19:08:52  jongfoster
- *    Changing _CONFIG_H to CONFIG_H_INCLUDED.
- *    Also added protection against using a MinGW32 or CygWin version of
- *    config.h from within MS Visual C++
- *
- *    Revision 1.8  2001/07/29 17:09:17  jongfoster
- *    Major changes to build system in order to fix these bugs:
- *    - pthreads under Linux was broken - changed -lpthread to -pthread
- *    - Compiling in MinGW32 mode under CygWin now correctly detects
- *      which shared libraries are available
- *    - Solaris support (?) (Not tested under Solaris yet)
- *
- *    Revision 1.7  2001/07/25 22:53:59  jongfoster
- *    Will #error if pthreads is enabled under BeOs
- *
- *    Revision 1.6  2001/07/15 17:54:29  jongfoster
- *    Renaming #define STATIC to STATIC_PCRE
- *    Adding new #define FEATURE_PTHREAD that will be used to enable
- *    POSIX threads support.
- *
- *    Revision 1.5  2001/07/13 13:48:37  oes
- *     - (Fix:) Copied CODE_STATUS #define from config.h.in
- *     - split REGEX #define into REGEX_GNU and REGEX_PCRE
- *       and removed PCRE.
- *       (REGEX = REGEX_GNU || REGEX_PCRE per project.h)
- *     - Moved STATIC (for pcre) here from Makefile.in
- *     - Introduced STATIC_PCRS #define to allow for dynaimc linking with
- *       libpcrs
- *     - Removed PCRS #define, since pcrs is now needed for CGI anyway
- *
- *    Revision 1.4  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.3  2001/05/26 01:26:34  jongfoster
- *    New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor.
- *    This #define cannot be set from ./configure - there's no point, it
- *    doesn't work yet.  See feature request # 425722
- *
- *    Revision 1.2  2001/05/22 17:43:35  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Many minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:45  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-@TOP@
-
-/*
- * Version number - Major (X._._)
- */
-#undef VERSION_MAJOR
-
-/*
- * Version number - Minor (_.X._)
- */
-#undef VERSION_MINOR
-
-/*
- * Version number - Point (_._.X)
- */
-#undef VERSION_POINT
-
-/*
- * Version number, as a string
- */
-#undef VERSION
-
-/*
- * Status of the code: "alpha", "beta" or "stable".
- */
-#undef CODE_STATUS
-
-/* 
- * Should pcre be statically built in instead of linkling with libpcre?
- * (This is determined by configure depending on the availiability of
- * libpcre and user preferences). The name is ugly, but pcre needs it.
- * Don't bother to change this here! Use configure instead.
- */
-#undef STATIC_PCRE
-
-/* 
- * Should pcrs be statically built in instead of linkling with libpcrs?
- * (This is determined by configure depending on the availiability of
- * libpcrs and user preferences).
- * Don't bother to change this here! Use configure instead.
- */
-#undef STATIC_PCRS
-
-/*
- * Allows the use of an ACL to control access to the proxy by IP address.
- */
-#undef FEATURE_ACL
-
-/*
- * Enables the web-based configuration (actionsfile) editor.  If you
- * have a shared proxy, you might want to turn this off.
- */
-#undef FEATURE_CGI_EDIT_ACTIONS
-
-/*
- * Allows the use of jar files to capture cookies.
- */
-#undef FEATURE_COOKIE_JAR
-
-/*
- * Locally redirect remote script-redirect URLs
- */
-#undef FEATURE_FAST_REDIRECTS
-
-/*
- * Bypass filtering for 1 page only
- */
-#undef FEATURE_FORCE_LOAD
-
-/*
- * Allow blocking using images as well as HTML.
- * If you do not define this then everything is blocked as HTML.
- *
- * Note that this is required if you want to use FEATURE_IMAGE_DETECT_MSIE.
- */
-#undef FEATURE_IMAGE_BLOCKING
-
-/*
- * Detect image requests automatically for MSIE.  Will fall back to
- * other image-detection methods (i.e. "+image" permission) for other
- * browsers.
- *
- * You must also define FEATURE_IMAGE_BLOCKING to use this feature.
- *
- * It detects the following header pair as an image request:
- *
- * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
- * Accept: * / *
- *
- * And the following as a HTML request:
- *
- * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
- * Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * / *
- *
- * And no, I haven't got that backwards - IE is being wierd.
- *
- * Known limitations: 
- * 1) If you press shift-reload on a blocked HTML page, you get
- *    the image "blocked" page, not the HTML "blocked" page.
- * 2) Once an image "blocked" page has been sent, viewing it 
- *    in it's own browser window *should* bring up the HTML
- *    "blocked" page, but it doesn't.  You need to clear the 
- *    browser cache to get the HTML version again.
- *
- * These limitations are due to IE making inconsistent choices
- * about which "Accept:" header to send.
- */
-#undef FEATURE_IMAGE_DETECT_MSIE
-
-/*
- * Kills JavaScript popups - window.open, onunload, etc.
- */
-#undef FEATURE_KILL_POPUPS
-
-/*
- * Use PNG instead of GIF for built-in images
- */
-#undef FEATURE_NO_GIFS
-
-/*
- * Allow to shutdown Privoxy through the webinterface.
- */
-#undef FEATURE_GRACEFUL_TERMINATION
-
-/*
- * Allow PCRE syntax in host patterns.
- */
-#undef FEATURE_EXTENDED_HOST_PATTERNS
-
-/*
- * Keep outgoing connections alive if possible.
- */
-#undef FEATURE_CONNECTION_KEEP_ALIVE
-
-/*
- * Use POSIX threads instead of native threads.
- */
-#undef FEATURE_PTHREAD
-
-/*
- * Enables statistics function.
- */
-#undef FEATURE_STATISTICS
-
-/*
- * Allow Privoxy to be "disabled" so it is just a normal non-blocking
- * non-anonymizing proxy.  This is useful if you're trying to access a
- * blocked or broken site - just change the setting in the config file,
- * or use the handy "Disable" menu option in the Windows GUI.
- */
-#undef FEATURE_TOGGLE
-
-/*
- * Allows the use of trust files.
- */
-#undef FEATURE_TRUST
-
-/*
- * Defined on Solaris only.  Makes the system libraries thread safe.
- */
-#undef _REENTRANT
-
-/*
- * Defined on Solaris only.  Without this, many important functions are not
- * defined in the system headers.
- */
-#undef __EXTENSIONS__
-
-/*
- * Defined always.
- * FIXME: Don't know what it does or why we need it.
- * (presumably something to do with MultiThreading?)
- */
-#undef __MT__
-
-/* If the (nonstandard and thread-safe) function gethostbyname_r
- * is available, select which signature to use
- */
-#undef HAVE_GETHOSTBYNAME_R_6_ARGS
-#undef HAVE_GETHOSTBYNAME_R_5_ARGS
-#undef HAVE_GETHOSTBYNAME_R_3_ARGS
-
-/* If the (nonstandard and thread-safe) function gethostbyaddr_r
- * is available, select which signature to use
- */
-#undef HAVE_GETHOSTBYADDR_R_8_ARGS
-#undef HAVE_GETHOSTBYADDR_R_7_ARGS
-#undef HAVE_GETHOSTBYADDR_R_5_ARGS
-
-/* Defined if you have gmtime_r and localtime_r with a signature
- * of (struct time *, struct tm *)
- */
-#undef HAVE_GMTIME_R
-#undef HAVE_LOCALTIME_R
-
-/* Define to 'int' if <sys/socket.h> doesn't have it. 
- */
-#undef socklen_t
-
-/* Define if pcre.h must be included as <pcre/pcre.h>
- */
-#undef PCRE_H_IN_SUBDIR
-
-/* Define if pcreposix.h must be included as <pcre/pcreposix.h>
- */
-#undef PCREPOSIX_H_IN_SUBDIR
-
-@BOTTOM@
-
-/*
- * Defined always.
- * FIXME: Don't know what it does or why we need it.
- * (presumably something to do with ANSI Standard C?)
- */
-#ifndef __STDC__
-#define __STDC__ 1
-#endif /* ndef __STDC__ */
-
-/*
- * Need to set up this define only for the Pthreads library for
- * Win32, available from http://sources.redhat.com/pthreads-win32/
- */
-#if defined(FEATURE_PTHREAD) && defined(_WIN32)
-#define __CLEANUP_C
-#endif /* defined(FEATURE_PTHREAD) && defined(_WIN32) */
-
-/*
- * BEOS does not currently support POSIX threads.
- * This *should* be detected by ./configure, but let's be sure.
- */
-#if defined(FEATURE_PTHREAD) && defined(__BEOS__)
-#error BEOS does not support pthread - please run ./configure again with "--disable-pthread"
-
-#endif /* defined(FEATURE_PTHREAD) && defined(__BEOS__) */
-
-/*
- * On OpenBSD and maybe also FreeBSD, gcc doesn't define the cpp
- * symbol unix; it defines __unix__ and sometimes not even that:
- */
-#if ( defined(__unix__) || defined(__NetBSD__) ) && !defined(unix)
-#define unix 1
-#endif
-
-/*
- * It's too easy to accidentally use a Cygwin or MinGW32 version of config.h
- * under VC++, and it usually gives many wierd error messages.  Let's make
- * the error messages understandable, by bailing out now.
- */
-#ifdef _MSC_VER
-#error For MS VC++, please use vc_config_winthreads.h or vc_config_pthreads.h.  You can usually do this by selecting the "Build", "Clean" menu option.
-#endif /* def _MSC_VER */
-
-#endif /* CONFIG_H_INCLUDED */
diff --git a/external/privoxy/actionlist.h b/external/privoxy/actionlist.h
deleted file mode 100644
index 339c878..0000000
--- a/external/privoxy/actionlist.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/actionlist.h,v $
- *
- * Purpose     :  Master list of supported actions.
- *                Not really a header, since it generates code.
- *                This is included (3 times!) from actions.c
- *                Each time, the following macros are defined to
- *                suitable values beforehand:
- *                    DEFINE_ACTION_MULTI()
- *                    DEFINE_ACTION_STRING()
- *                    DEFINE_ACTION_BOOL()
- *                    DEFINE_ACTION_ALIAS
- *
- * Copyright   :  Written by and Copyright (C) 2001-2008 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: actionlist.h,v $
- *    Revision 1.36  2008/09/20 10:04:33  fabiankeil
- *    Remove hide-forwarded-for-headers action which has
- *    been obsoleted by change-x-forwarded-for{block}.
- *
- *    Revision 1.35  2008/09/19 15:43:54  fabiankeil
- *    Fix sorting.
- *
- *    Revision 1.34  2008/09/19 15:26:28  fabiankeil
- *    Add change-x-forwarded-for{} action to block or add
- *    X-Forwarded-For headers. Mostly based on code removed
- *    before 3.0.7.
- *
- *    Revision 1.33  2008/03/29 12:13:45  fabiankeil
- *    Remove send-wafer and send-vanilla-wafer actions.
- *
- *    Revision 1.32  2008/03/28 15:13:42  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.31  2008/03/27 18:27:20  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.30  2008/03/04 18:30:34  fabiankeil
- *    Remove the treat-forbidden-connects-like-blocks action. We now
- *    use the "blocked" page for forbidden CONNECT requests by default.
- *
- *    Revision 1.29  2008/03/01 14:00:43  fabiankeil
- *    Let the block action take the reason for the block
- *    as argument and show it on the "blocked" page.
- *
- *    Revision 1.28  2007/12/11 21:08:29  fabiankeil
- *    Let the CGI editor suggest a forward-override
- *    parameter whose syntax is actually valid.
- *
- *    Revision 1.27  2007/11/10 15:04:08  fabiankeil
- *    Tell the CGI editor about +hide-referrer{conditional-forge}.
- *
- *    Revision 1.26  2007/06/01 16:54:28  fabiankeil
- *    Add forward-override{} to change the forwarding settings through
- *    action sections. This is mainly interesting to forward different
- *    clients differently (for example based on User-Agent or request
- *    origin).
- *
- *    Revision 1.25  2007/04/15 16:39:20  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.24  2007/03/20 15:16:34  fabiankeil
- *    Use dedicated header filter actions instead of abusing "filter".
- *    Replace "filter-client-headers" and "filter-client-headers"
- *    with "server-header-filter" and "client-header-filter".
- *
- *    Revision 1.23  2006/10/09 10:26:18  fabiankeil
- *    Changed the path in set-image-blocker's redirection default to
- *    "send-banner?type=pattern" instead of "show-banner?type=pattern"
- *    which isn't caught by Privoxy. Fixes BR 1573468.
- *
- *    Changed hide-user-agent's default value to "Privoxy VERSION".
- *
- *    Changed hide-referrer's default fake value to "http://www.privoxy.org/";.
- *    A static referrer is obviously fake anyway, so we might as well
- *    advertise ourselves.
- *
- *    Revision 1.22  2006/09/01 17:14:18  hal9
- *    Re-ordered the actions list so that they display in the actions editor in
- *    alphabetical order. Some of the new actions were "out of order".
- *
- *    Revision 1.21  2006/08/14 08:25:19  fabiankeil
- *    Split filter-headers{} into filter-client-headers{}
- *    and filter-server-headers{}.
- *    Added parse_header_time() to share some code.
- *    Replaced timegm() with mktime().
- *
- *    Revision 1.20  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.19  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.17.2.3  2004/10/03 12:53:32  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.17.2.2  2002/09/25 15:25:25  oes
- *    Added more aliases for prehistoric action names
- *
- *    Revision 1.17.2.1  2002/08/02 12:50:47  oes
- *    Consistency with docs: Change default name for action from hide-referer to hide-referrer
- *
- *    Revision 1.17  2002/05/14 21:25:55  oes
- *    Renamed prevent-(setting/reading)-cookies to crunch-(incoming/outgoing)-cookies
- *
- *    Revision 1.16  2002/04/24 02:15:18  oes
- *    Renamed actions as discussed, Aliased old action names to new ones.
- *
- *    Revision 1.15  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.14  2002/03/24 16:32:08  jongfoster
- *    Removing logo option
- *
- *    Revision 1.13  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.12  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.11  2002/03/12 01:42:49  oes
- *    Introduced modular filters
- *
- *    Revision 1.10  2002/03/08 18:19:14  jongfoster
- *    Adding +image-blocker{pattern} option to edit interface
- *
- *    Revision 1.9  2001/11/22 21:58:41  jongfoster
- *    Adding action +no-cookies-keep
- *
- *    Revision 1.8  2001/10/10 16:42:52  oes
- *    Fixed a bug, Added +limit-connect string action
- *
- *    Revision 1.7  2001/10/07 15:33:59  oes
- *    Introduced a +no-compression action
- *    Introduced a +downgrade action
- *
- *    Revision 1.6  2001/09/16 15:47:37  jongfoster
- *    First version of CGI-based edit interface.  This is very much a
- *    work-in-progress, and you can't actually use it to edit anything
- *    yet.  You must #define FEATURE_CGI_EDIT_ACTIONS for these changes
- *    to have any effect.
- *
- *    Revision 1.5  2001/07/18 12:27:03  oes
- *    Changed deanimate-gifs to string action
- *
- *    Revision 1.4  2001/07/13 13:52:12  oes
- *     - Formatting
- *     - Introduced new action ACTION_DEANIMATE
- *
- *    Revision 1.3  2001/06/07 23:03:56  jongfoster
- *    Added standard comment at top of file.
- *
- *
- *********************************************************************/
-
-
-#if !(defined(DEFINE_ACTION_BOOL) && defined(DEFINE_ACTION_MULTI) && defined(DEFINE_ACTION_STRING))
-#error Please define lots of macros before including "actionlist.h".
-#endif /* !defined(all the DEFINE_ACTION_xxx macros) */
-
-#ifndef DEFINE_CGI_PARAM_RADIO
-#define DEFINE_CGI_PARAM_RADIO(name, bit, index, value, is_default)
-#define DEFINE_CGI_PARAM_CUSTOM(name, bit, index, default_val)
-#define DEFINE_CGI_PARAM_NO_RADIO(name, bit, index, default_val)
-#endif /* ndef DEFINE_CGI_PARAM_RADIO */
-
-DEFINE_ACTION_MULTI      ("add-header",                 ACTION_MULTI_ADD_HEADER)
-DEFINE_ACTION_STRING     ("block",                      ACTION_BLOCK, ACTION_STRING_BLOCK)
-DEFINE_CGI_PARAM_NO_RADIO("block",                      ACTION_BLOCK, ACTION_STRING_BLOCK, "No reason specified.")
-DEFINE_ACTION_STRING     ("change-x-forwarded-for",     ACTION_CHANGE_X_FORWARDED_FOR,  ACTION_STRING_CHANGE_X_FORWARDED_FOR)
-DEFINE_CGI_PARAM_RADIO   ("change-x-forwarded-for",     ACTION_CHANGE_X_FORWARDED_FOR,  ACTION_STRING_CHANGE_X_FORWARDED_FOR, "block", 0)
-DEFINE_CGI_PARAM_RADIO   ("change-x-forwarded-for",     ACTION_CHANGE_X_FORWARDED_FOR,  ACTION_STRING_CHANGE_X_FORWARDED_FOR, "add", 1)
-DEFINE_ACTION_MULTI      ("client-header-filter",       ACTION_MULTI_CLIENT_HEADER_FILTER)
-DEFINE_ACTION_MULTI      ("client-header-tagger",       ACTION_MULTI_CLIENT_HEADER_TAGGER)
-DEFINE_ACTION_STRING     ("content-type-overwrite",     ACTION_CONTENT_TYPE_OVERWRITE, ACTION_STRING_CONTENT_TYPE)
-DEFINE_CGI_PARAM_NO_RADIO("content-type-overwrite",     ACTION_CONTENT_TYPE_OVERWRITE, ACTION_STRING_CONTENT_TYPE,    "text/html")
-DEFINE_ACTION_STRING     ("crunch-client-header",       ACTION_CRUNCH_CLIENT_HEADER, ACTION_STRING_CLIENT_HEADER)
-DEFINE_CGI_PARAM_NO_RADIO("crunch-client-header",       ACTION_CRUNCH_CLIENT_HEADER, ACTION_STRING_CLIENT_HEADER,          "X-Whatever:")
-DEFINE_ACTION_BOOL       ("crunch-if-none-match",       ACTION_CRUNCH_IF_NONE_MATCH)
-DEFINE_ACTION_BOOL       ("crunch-incoming-cookies",    ACTION_NO_COOKIE_SET)
-DEFINE_ACTION_BOOL       ("crunch-outgoing-cookies",    ACTION_NO_COOKIE_READ)
-DEFINE_ACTION_STRING     ("crunch-server-header",       ACTION_CRUNCH_SERVER_HEADER, ACTION_STRING_SERVER_HEADER)
-DEFINE_CGI_PARAM_NO_RADIO("crunch-server-header",       ACTION_CRUNCH_SERVER_HEADER, ACTION_STRING_SERVER_HEADER,          "X-Whatever:")
-DEFINE_ACTION_STRING     ("deanimate-gifs",             ACTION_DEANIMATE,       ACTION_STRING_DEANIMATE)
-DEFINE_CGI_PARAM_RADIO   ("deanimate-gifs",             ACTION_DEANIMATE,       ACTION_STRING_DEANIMATE,     "first", 0)
-DEFINE_CGI_PARAM_RADIO   ("deanimate-gifs",             ACTION_DEANIMATE,       ACTION_STRING_DEANIMATE,     "last",  1)
-DEFINE_ACTION_BOOL       ("downgrade-http-version",     ACTION_DOWNGRADE)
-DEFINE_ACTION_STRING     ("fast-redirects",             ACTION_FAST_REDIRECTS,  ACTION_STRING_FAST_REDIRECTS)
-DEFINE_CGI_PARAM_RADIO   ("fast-redirects",             ACTION_FAST_REDIRECTS,  ACTION_STRING_FAST_REDIRECTS, "simple-check",  0)
-DEFINE_CGI_PARAM_RADIO   ("fast-redirects",             ACTION_FAST_REDIRECTS,  ACTION_STRING_FAST_REDIRECTS, "check-decoded-url",  1)
-DEFINE_ACTION_MULTI      ("filter",                     ACTION_MULTI_FILTER)
-DEFINE_ACTION_BOOL       ("force-text-mode",            ACTION_FORCE_TEXT_MODE)
-DEFINE_ACTION_STRING     ("forward-override",           ACTION_FORWARD_OVERRIDE, ACTION_STRING_FORWARD_OVERRIDE)
-DEFINE_CGI_PARAM_CUSTOM  ("forward-override",           ACTION_FORWARD_OVERRIDE, ACTION_STRING_FORWARD_OVERRIDE, "forward .")
-DEFINE_ACTION_BOOL       ("handle-as-empty-document",   ACTION_HANDLE_AS_EMPTY_DOCUMENT)
-DEFINE_ACTION_BOOL       ("handle-as-image",            ACTION_IMAGE)
-DEFINE_ACTION_STRING     ("hide-accept-language",       ACTION_HIDE_ACCEPT_LANGUAGE, ACTION_STRING_LANGUAGE)
-DEFINE_CGI_PARAM_RADIO   ("hide-accept-language",       ACTION_HIDE_ACCEPT_LANGUAGE, ACTION_STRING_LANGUAGE, "block", 0)
-DEFINE_CGI_PARAM_CUSTOM  ("hide-accept-language",       ACTION_HIDE_ACCEPT_LANGUAGE, ACTION_STRING_LANGUAGE, "de-de")
-DEFINE_ACTION_STRING     ("hide-content-disposition",   ACTION_HIDE_CONTENT_DISPOSITION, ACTION_STRING_CONTENT_DISPOSITION)
-DEFINE_CGI_PARAM_RADIO   ("hide-content-disposition",   ACTION_HIDE_CONTENT_DISPOSITION, ACTION_STRING_CONTENT_DISPOSITION,    "block", 0)
-DEFINE_CGI_PARAM_CUSTOM  ("hide-content-disposition",   ACTION_HIDE_CONTENT_DISPOSITION, ACTION_STRING_CONTENT_DISPOSITION,    "attachment; filename=WHATEVER.txt")
-DEFINE_ACTION_STRING     ("hide-from-header",           ACTION_HIDE_FROM,       ACTION_STRING_FROM)
-DEFINE_CGI_PARAM_RADIO   ("hide-from-header",           ACTION_HIDE_FROM,       ACTION_STRING_FROM,          "block", 1)
-DEFINE_CGI_PARAM_CUSTOM  ("hide-from-header",           ACTION_HIDE_FROM,       ACTION_STRING_FROM,          "spam_me_senseless@xxxxxxxxxxxxxxx")
-DEFINE_ACTION_STRING     ("hide-if-modified-since",     ACTION_HIDE_IF_MODIFIED_SINCE, ACTION_STRING_IF_MODIFIED_SINCE)
-DEFINE_CGI_PARAM_RADIO   ("hide-if-modified-since",     ACTION_HIDE_IF_MODIFIED_SINCE, ACTION_STRING_IF_MODIFIED_SINCE, "block", 0)
-DEFINE_CGI_PARAM_CUSTOM  ("hide-if-modified-since",     ACTION_HIDE_IF_MODIFIED_SINCE, ACTION_STRING_IF_MODIFIED_SINCE, "-1")
-DEFINE_ACTION_STRING     ("hide-referrer",              ACTION_HIDE_REFERER,    ACTION_STRING_REFERER)
-DEFINE_CGI_PARAM_RADIO   ("hide-referrer",              ACTION_HIDE_REFERER,    ACTION_STRING_REFERER,       "conditional-forge", 3)
-DEFINE_CGI_PARAM_RADIO   ("hide-referrer",              ACTION_HIDE_REFERER,    ACTION_STRING_REFERER,       "conditional-block", 2)
-DEFINE_CGI_PARAM_RADIO   ("hide-referrer",              ACTION_HIDE_REFERER,    ACTION_STRING_REFERER,       "forge", 1)
-DEFINE_CGI_PARAM_RADIO   ("hide-referrer",              ACTION_HIDE_REFERER,    ACTION_STRING_REFERER,       "block", 0)
-DEFINE_CGI_PARAM_CUSTOM  ("hide-referrer",              ACTION_HIDE_REFERER,    ACTION_STRING_REFERER,       "http://www.privoxy.org/";)
-DEFINE_ACTION_STRING     ("hide-user-agent",            ACTION_HIDE_USER_AGENT, ACTION_STRING_USER_AGENT)
-DEFINE_CGI_PARAM_NO_RADIO("hide-user-agent",            ACTION_HIDE_USER_AGENT, ACTION_STRING_USER_AGENT,    "Privoxy " VERSION)
-DEFINE_ACTION_STRING     ("limit-connect",              ACTION_LIMIT_CONNECT,   ACTION_STRING_LIMIT_CONNECT)
-DEFINE_CGI_PARAM_NO_RADIO("limit-connect",              ACTION_LIMIT_CONNECT,   ACTION_STRING_LIMIT_CONNECT,  "443")
-DEFINE_ACTION_STRING     ("overwrite-last-modified",    ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED)
-DEFINE_CGI_PARAM_RADIO   ("overwrite-last-modified",    ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED, "block", 0)
-DEFINE_CGI_PARAM_RADIO   ("overwrite-last-modified",    ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED, "reset-to-request-time", 1)
-DEFINE_CGI_PARAM_RADIO   ("overwrite-last-modified",    ACTION_OVERWRITE_LAST_MODIFIED, ACTION_STRING_LAST_MODIFIED, "randomize", 2)
-DEFINE_ACTION_BOOL       ("prevent-compression",        ACTION_NO_COMPRESSION)
-DEFINE_ACTION_STRING     ("redirect",                   ACTION_REDIRECT,        ACTION_STRING_REDIRECT)
-DEFINE_CGI_PARAM_NO_RADIO("redirect",                   ACTION_REDIRECT,        ACTION_STRING_REDIRECT,  "http://localhost/";)
-DEFINE_ACTION_MULTI      ("server-header-filter",       ACTION_MULTI_SERVER_HEADER_FILTER)
-DEFINE_ACTION_MULTI      ("server-header-tagger",       ACTION_MULTI_SERVER_HEADER_TAGGER)
-DEFINE_ACTION_BOOL       ("session-cookies-only",       ACTION_NO_COOKIE_KEEP)
-DEFINE_ACTION_STRING     ("set-image-blocker",          ACTION_IMAGE_BLOCKER,   ACTION_STRING_IMAGE_BLOCKER)
-DEFINE_CGI_PARAM_RADIO   ("set-image-blocker",          ACTION_IMAGE_BLOCKER,   ACTION_STRING_IMAGE_BLOCKER, "pattern", 1)
-DEFINE_CGI_PARAM_RADIO   ("set-image-blocker",          ACTION_IMAGE_BLOCKER,   ACTION_STRING_IMAGE_BLOCKER, "blank", 0)
-DEFINE_CGI_PARAM_CUSTOM  ("set-image-blocker",          ACTION_IMAGE_BLOCKER,   ACTION_STRING_IMAGE_BLOCKER,  CGI_PREFIX "send-banner?type=pattern")
-
-#if DEFINE_ACTION_ALIAS
-
-/* 
- * Alternative spellings
- */
-DEFINE_ACTION_STRING     ("hide-referer",   ACTION_HIDE_REFERER,    ACTION_STRING_REFERER)
-DEFINE_ACTION_BOOL       ("prevent-keeping-cookies", ACTION_NO_COOKIE_KEEP)
-
-/* 
- * Pre-3.0.7 (pseudo) compatibility
- */
-DEFINE_ACTION_MULTI      ("filter-client-headers",       ACTION_MULTI_CLIENT_HEADER_FILTER)
-DEFINE_ACTION_MULTI      ("filter-server-headers",       ACTION_MULTI_SERVER_HEADER_FILTER)
-
-/* 
- * Pre-3.0 compatibility
- */
-DEFINE_ACTION_BOOL       ("no-cookie-read",          ACTION_NO_COOKIE_READ)
-DEFINE_ACTION_BOOL       ("no-cookie-set",           ACTION_NO_COOKIE_SET)
-DEFINE_ACTION_BOOL       ("prevent-reading-cookies", ACTION_NO_COOKIE_READ)
-DEFINE_ACTION_BOOL       ("prevent-setting-cookies", ACTION_NO_COOKIE_SET)
-DEFINE_ACTION_BOOL       ("downgrade",               ACTION_DOWNGRADE)
-DEFINE_ACTION_STRING     ("hide-from",               ACTION_HIDE_FROM,       ACTION_STRING_FROM)
-DEFINE_ACTION_BOOL       ("image",                   ACTION_IMAGE)
-DEFINE_ACTION_STRING     ("image-blocker",           ACTION_IMAGE_BLOCKER,   ACTION_STRING_IMAGE_BLOCKER)
-DEFINE_ACTION_BOOL       ("no-compression",          ACTION_NO_COMPRESSION)
-DEFINE_ACTION_BOOL       ("no-cookies-keep",         ACTION_NO_COOKIE_KEEP)
-DEFINE_ACTION_BOOL       ("no-cookies-read",         ACTION_NO_COOKIE_READ)
-DEFINE_ACTION_BOOL       ("no-cookies-set",          ACTION_NO_COOKIE_SET)
-#endif /* if DEFINE_ACTION_ALIAS */
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-#undef DEFINE_CGI_PARAM_CUSTOM
-#undef DEFINE_CGI_PARAM_RADIO
-#undef DEFINE_CGI_PARAM_NO_RADIO
-
diff --git a/external/privoxy/actions.c b/external/privoxy/actions.c
deleted file mode 100644
index 172085f..0000000
--- a/external/privoxy/actions.c
+++ /dev/null
@@ -1,2021 +0,0 @@
-const char actions_rcs[] = "$Id: actions.c,v 1.56 2009/03/08 14:19:21 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/actions.c,v $
- *
- * Purpose     :  Declares functions to work with actions files
- *                Functions declared include: FIXME
- *
- * Copyright   :  Written by and Copyright (C) 2001-2008 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: actions.c,v $
- *    Revision 1.56  2009/03/08 14:19:21  fabiankeil
- *    Fix justified (but harmless) compiler warnings
- *    on platforms where sizeof(int) < sizeof(long).
- *
- *    Revision 1.55  2008/12/04 18:18:56  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.54  2008/09/20 10:04:33  fabiankeil
- *    Remove hide-forwarded-for-headers action which has
- *    been obsoleted by change-x-forwarded-for{block}.
- *
- *    Revision 1.53  2008/05/26 16:04:04  fabiankeil
- *    s@memorey@memory@
- *
- *    Revision 1.52  2008/04/27 16:26:59  fabiankeil
- *    White space fix for the last commit.
- *
- *    Revision 1.51  2008/04/27 16:20:19  fabiankeil
- *    Complain about every block action without reason found.
- *
- *    Revision 1.50  2008/03/30 14:52:00  fabiankeil
- *    Rename load_actions_file() and load_re_filterfile()
- *    as they load multiple files "now".
- *
- *    Revision 1.49  2008/03/29 12:13:45  fabiankeil
- *    Remove send-wafer and send-vanilla-wafer actions.
- *
- *    Revision 1.48  2008/03/28 18:17:14  fabiankeil
- *    In action_used_to_be_valid(), loop through an array of formerly
- *    valid actions instead of using an OR-chain of strcmpic() calls.
- *
- *    Revision 1.47  2008/03/28 15:13:37  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.46  2008/03/27 18:27:20  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.45  2008/03/24 11:21:02  fabiankeil
- *    Share the action settings for multiple patterns in the same
- *    section so we waste less memory for gigantic block lists
- *    (and load them slightly faster). Reported by Franz Schwartau.
- *
- *    Revision 1.44  2008/03/04 18:30:34  fabiankeil
- *    Remove the treat-forbidden-connects-like-blocks action. We now
- *    use the "blocked" page for forbidden CONNECT requests by default.
- *
- *    Revision 1.43  2008/03/01 14:00:43  fabiankeil
- *    Let the block action take the reason for the block
- *    as argument and show it on the "blocked" page.
- *
- *    Revision 1.42  2008/02/09 15:15:38  fabiankeil
- *    List active and inactive actions in the show-url-info's
- *    "Final results" section separately. Patch submitted by Lee
- *    in #1830056, modified to list active actions first.
- *
- *    Revision 1.41  2008/01/28 20:17:40  fabiankeil
- *    - Mark some parameters as immutable.
- *    - Hide update_action_bits_for_all_tags() while it's unused.
- *
- *    Revision 1.40  2007/05/21 10:26:50  fabiankeil
- *    - Use strlcpy() instead of strcpy().
- *    - Provide a reason why loading the actions
- *      file might have failed.
- *
- *    Revision 1.39  2007/04/17 18:21:45  fabiankeil
- *    Split update_action_bits() into
- *    update_action_bits_for_all_tags()
- *    and update_action_bits_for_tag().
- *
- *    Revision 1.38  2007/04/15 16:39:20  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.37  2007/03/11 15:56:12  fabiankeil
- *    Add kludge to log unknown aliases and actions before exiting.
- *
- *    Revision 1.36  2006/12/28 17:15:42  fabiankeil
- *    Fix gcc43 conversion warning.
- *
- *    Revision 1.35  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.32.2.6  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.32.2.5  2005/06/09 01:18:41  david__schmidt
- *    Tweaks to conditionally include pthread.h if FEATURE_PTHREAD is enabled -
- *    this becomes important when jcc.h gets included later down the line.
- *
- *    Revision 1.32.2.4  2003/12/03 10:33:11  oes
- *    - Implemented Privoxy version requirement through
- *      for-privoxy-version= statement in {{settings}}
- *      block
- *    - Fix for unchecked out-of-memory condition
- *
- *    Revision 1.32.2.3  2003/02/28 12:52:10  oes
- *    Fixed memory leak reported by Dan Price in Bug #694713
- *
- *    Revision 1.32.2.2  2002/11/20 14:36:55  oes
- *    Extended unload_current_actions_file() to multiple AFs.
- *    Thanks to Oliver Stoeneberg for the hint.
- *
- *    Revision 1.32.2.1  2002/05/26 12:13:16  roro
- *    Change unsigned to unsigned long in actions_name struct.  This closes
- *    SourceForge Bug #539284.
- *
- *    Revision 1.32  2002/05/12 21:36:29  jongfoster
- *    Correcting function comments
- *
- *    Revision 1.31  2002/05/06 07:56:50  oes
- *    Made actions_to_html independent of FEATURE_CGI_EDIT_ACTIONS
- *
- *    Revision 1.30  2002/04/30 11:14:52  oes
- *    Made csp the first parameter in *action_to_html
- *
- *    Revision 1.29  2002/04/26 19:30:54  jongfoster
- *    - current_action_to_html(): Adding help link for the "-" form of
- *      one-string actions.
- *    - Some actions had "<br>-", some "<br> -" (note the space).
- *      Standardizing on no space.
- *    - Greatly simplifying some of the code by using string_join()
- *      where appropriate.
- *
- *    Revision 1.28  2002/04/26 12:53:15  oes
- *     - CGI AF editor now writes action lines split into
- *       single lines with line continuation
- *     - actions_to_html now embeds each action name in
- *       link to chapter
- *     - current_action_to_text is now called current_action_to_html
- *       and acts like actions_to_html
- *
- *    Revision 1.27  2002/04/24 02:10:31  oes
- *     - Jon's patch for multiple AFs:
- *       - split load_actions_file, add load_one_actions_file
- *       - make csp->actions_list files an array
- *       - remember file id with each action
- *     - Copy_action now frees dest action before copying
- *
- *    Revision 1.26  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.25  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.24  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.23  2002/03/07 03:46:16  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.22  2002/01/21 00:27:02  jongfoster
- *    Allowing free_action(NULL).
- *    Moving the functions that #include actionlist.h to the end of the file,
- *    because the Visual C++ 97 debugger gets extremely confused if you try
- *    to debug any code that comes after them in the file.
- *
- *    Revision 1.21  2002/01/17 20:54:44  jongfoster
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Revision 1.20  2001/11/22 21:56:49  jongfoster
- *    Making action_spec->flags into an unsigned long rather than just an
- *    unsigned int.
- *    Fixing a bug in the display of -add-header and -wafer
- *
- *    Revision 1.19  2001/11/13 00:14:07  jongfoster
- *    Fixing stupid bug now I've figured out what || means.
- *    (It always returns 0 or 1, not one of it's paramaters.)
- *
- *    Revision 1.18  2001/11/07 00:06:06  steudten
- *    Add line number in error output for lineparsing for
- *    actionsfile.
- *
- *    Revision 1.17  2001/10/25 03:40:47  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.16  2001/10/23 21:30:30  jongfoster
- *    Adding error-checking to selected functions.
- *
- *    Revision 1.15  2001/10/14 21:58:22  jongfoster
- *    Adding support for the CGI-based editor:
- *    - Exported get_actions()
- *    - Added new function free_alias_list()
- *    - Added support for {{settings}} and {{description}} blocks
- *      in the actions file.  They are currently ignored.
- *    - Added restriction to only one {{alias}} block which must appear
- *      first in the file, to simplify the editor's rewriting rules.
- *    - Note that load_actions_file() is no longer used by the CGI-based
- *      editor, but some of the other routines in this file are.
- *
- *    Revision 1.14  2001/09/22 16:36:59  jongfoster
- *    Removing unused parameter fs from read_config_line()
- *
- *    Revision 1.13  2001/09/16 15:47:37  jongfoster
- *    First version of CGI-based edit interface.  This is very much a
- *    work-in-progress, and you can't actually use it to edit anything
- *    yet.  You must #define FEATURE_CGI_EDIT_ACTIONS for these changes
- *    to have any effect.
- *
- *    Revision 1.12  2001/09/16 13:21:27  jongfoster
- *    Changes to use new list functions.
- *
- *    Revision 1.11  2001/09/14 00:17:32  jongfoster
- *    Tidying up memory allocation. New function init_action().
- *
- *    Revision 1.10  2001/09/10 10:14:34  oes
- *    Removing unused variable
- *
- *    Revision 1.9  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.8  2001/06/29 13:19:52  oes
- *    Removed logentry from cancelled commit
- *
- *    Revision 1.7  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.6  2001/06/07 23:04:34  jongfoster
- *    Made get_actions() static.
- *
- *    Revision 1.5  2001/06/03 19:11:48  oes
- *    adapted to new enlist_unique arg format
- *
- *    Revision 1.4  2001/06/01 20:03:42  jongfoster
- *    Better memory management - current_action->strings[] now
- *    contains copies of the strings, not the original.
- *
- *    Revision 1.3  2001/06/01 18:49:17  jongfoster
- *    Replaced "list_share" with "list" - the tiny memory gain was not
- *    worth the extra complexity.
- *
- *    Revision 1.2  2001/05/31 21:40:00  jongfoster
- *    Removing some commented out, obsolete blocks of code.
- *
- *    Revision 1.1  2001/05/31 21:16:46  jongfoster
- *    Moved functions to process the action list into this new file.
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#ifdef FEATURE_PTHREAD
-#include <pthread.h>
-#endif
-
-#include "project.h"
-#include "jcc.h"
-#include "list.h"
-#include "actions.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "loaders.h"
-#include "encode.h"
-#include "urlmatch.h"
-#include "cgi.h"
-#include "ssplit.h"
-
-const char actions_h_rcs[] = ACTIONS_H_VERSION;
-
-
-/*
- * We need the main list of options.
- *
- * First, we need a way to tell between boolean, string, and multi-string
- * options.  For string and multistring options, we also need to be
- * able to tell the difference between a "+" and a "-".  (For bools,
- * the "+"/"-" information is encoded in "add" and "mask").  So we use
- * an enumerated type (well, the preprocessor equivalent).  Here are
- * the values:
- */
-#define AV_NONE       0 /* +opt -opt */
-#define AV_ADD_STRING 1 /* +stropt{string} */
-#define AV_REM_STRING 2 /* -stropt */
-#define AV_ADD_MULTI  3 /* +multiopt{string} +multiopt{string2} */
-#define AV_REM_MULTI  4 /* -multiopt{string} -multiopt          */
-
-/*
- * We need a structure to hold the name, flag changes,
- * type, and string index.
- */
-struct action_name
-{
-   const char * name;
-   unsigned long mask;   /* a bit set to "0" = remove action */
-   unsigned long add;    /* a bit set to "1" = add action */
-   int takes_value;      /* an AV_... constant */
-   int index;            /* index into strings[] or multi[] */
-};
-
-/*
- * And with those building blocks in place, here's the array.
- */
-static const struct action_name action_names[] =
-{
-   /*
-    * Well actually there's no data here - it's in actionlist.h
-    * This keeps it together to make it easy to change.
-    *
-    * Here's the macros used to format it:
-    */
-#define DEFINE_ACTION_MULTI(name,index)                   \
-   { "+" name, ACTION_MASK_ALL, 0, AV_ADD_MULTI, index }, \
-   { "-" name, ACTION_MASK_ALL, 0, AV_REM_MULTI, index },
-#define DEFINE_ACTION_STRING(name,flag,index)                 \
-   { "+" name, ACTION_MASK_ALL, flag, AV_ADD_STRING, index }, \
-   { "-" name, ~flag, 0, AV_REM_STRING, index },
-#define DEFINE_ACTION_BOOL(name,flag)   \
-   { "+" name, ACTION_MASK_ALL, flag }, \
-   { "-" name, ~flag, 0 },
-#define DEFINE_ACTION_ALIAS 1 /* Want aliases please */
-
-#include "actionlist.h"
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-
-   { NULL, 0, 0 } /* End marker */
-};
-
-
-static int load_one_actions_file(struct client_state *csp, int fileid);
-
-
-/*********************************************************************
- *
- * Function    :  merge_actions
- *
- * Description :  Merge two actions together.
- *                Similar to "dest += src".
- *
- * Parameters  :
- *          1  :  dest = Actions to modify.
- *          2  :  src = Action to add.
- *
- * Returns     :  JB_ERR_OK or JB_ERR_MEMORY
- *
- *********************************************************************/
-jb_err merge_actions (struct action_spec *dest,
-                      const struct action_spec *src)
-{
-   int i;
-   jb_err err;
-
-   dest->mask &= src->mask;
-   dest->add  &= src->mask;
-   dest->add  |= src->add;
-
-   for (i = 0; i < ACTION_STRING_COUNT; i++)
-   {
-      char * str = src->string[i];
-      if (str)
-      {
-         freez(dest->string[i]);
-         dest->string[i] = strdup(str);
-         if (NULL == dest->string[i])
-         {
-            return JB_ERR_MEMORY;
-         }
-      }
-   }
-
-   for (i = 0; i < ACTION_MULTI_COUNT; i++)
-   {
-      if (src->multi_remove_all[i])
-      {
-         /* Remove everything from dest */
-         list_remove_all(dest->multi_remove[i]);
-         dest->multi_remove_all[i] = 1;
-
-         err = list_duplicate(dest->multi_add[i], src->multi_add[i]);
-      }
-      else if (dest->multi_remove_all[i])
-      {
-         /*
-          * dest already removes everything, so we only need to worry
-          * about what we add.
-          */
-         list_remove_list(dest->multi_add[i], src->multi_remove[i]);
-         err = list_append_list_unique(dest->multi_add[i], src->multi_add[i]);
-      }
-      else
-      {
-         /* No "remove all"s to worry about. */
-         list_remove_list(dest->multi_add[i], src->multi_remove[i]);
-         err = list_append_list_unique(dest->multi_remove[i], src->multi_remove[i]);
-         if (!err) err = list_append_list_unique(dest->multi_add[i], src->multi_add[i]);
-      }
-
-      if (err)
-      {
-         return err;
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  copy_action
- *
- * Description :  Copy an action_specs.
- *                Similar to "dest = src".
- *
- * Parameters  :
- *          1  :  dest = Destination of copy.
- *          2  :  src = Source for copy.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-jb_err copy_action (struct action_spec *dest,
-                    const struct action_spec *src)
-{
-   int i;
-   jb_err err = JB_ERR_OK;
-
-   free_action(dest);
-   memset(dest, '\0', sizeof(*dest));
-
-   dest->mask = src->mask;
-   dest->add  = src->add;
-
-   for (i = 0; i < ACTION_STRING_COUNT; i++)
-   {
-      char * str = src->string[i];
-      if (str)
-      {
-         str = strdup(str);
-         if (!str)
-         {
-            return JB_ERR_MEMORY;
-         }
-         dest->string[i] = str;
-      }
-   }
-
-   for (i = 0; i < ACTION_MULTI_COUNT; i++)
-   {
-      dest->multi_remove_all[i] = src->multi_remove_all[i];
-      err = list_duplicate(dest->multi_remove[i], src->multi_remove[i]);
-      if (err)
-      {
-         return err;
-      }
-      err = list_duplicate(dest->multi_add[i],    src->multi_add[i]);
-      if (err)
-      {
-         return err;
-      }
-   }
-   return err;
-}
-
-/*********************************************************************
- *
- * Function    :  free_action_spec
- *
- * Description :  Frees an action_spec and the memory used by it.
- *
- * Parameters  :
- *          1  :  src = Source to free.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_action_spec(struct action_spec *src)
-{
-   free_action(src);
-   freez(src);
-}
-
-
-/*********************************************************************
- *
- * Function    :  free_action
- *
- * Description :  Destroy an action_spec.  Frees memory used by it,
- *                except for the memory used by the struct action_spec
- *                itself.
- *
- * Parameters  :
- *          1  :  src = Source to free.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_action (struct action_spec *src)
-{
-   int i;
-
-   if (src == NULL)
-   {
-      return;
-   }
-
-   for (i = 0; i < ACTION_STRING_COUNT; i++)
-   {
-      freez(src->string[i]);
-   }
-
-   for (i = 0; i < ACTION_MULTI_COUNT; i++)
-   {
-      destroy_list(src->multi_remove[i]);
-      destroy_list(src->multi_add[i]);
-   }
-
-   memset(src, '\0', sizeof(*src));
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_action_token
- *
- * Description :  Parses a line for the first action.
- *                Modifies it's input array, doesn't allocate memory.
- *                e.g. given:
- *                *line="  +abc{def}  -ghi "
- *                Returns:
- *                *line="  -ghi "
- *                *name="+abc"
- *                *value="def"
- *
- * Parameters  :
- *          1  :  line = [in] The line containing the action.
- *                       [out] Start of next action on line, or
- *                       NULL if we reached the end of line before
- *                       we found an action.
- *          2  :  name = [out] Start of action name, null
- *                       terminated.  NULL on EOL
- *          3  :  value = [out] Start of action value, null
- *                        terminated.  NULL if none or EOL.
- *
- * Returns     :  JB_ERR_OK => Ok
- *                JB_ERR_PARSE => Mismatched {} (line was trashed anyway)
- *
- *********************************************************************/
-jb_err get_action_token(char **line, char **name, char **value)
-{
-   char * str = *line;
-   char ch;
-
-   /* set default returns */
-   *line = NULL;
-   *name = NULL;
-   *value = NULL;
-
-   /* Eat any leading whitespace */
-   while ((*str == ' ') || (*str == '\t'))
-   {
-      str++;
-   }
-
-   if (*str == '\0')
-   {
-      return 0;
-   }
-
-   if (*str == '{')
-   {
-      /* null name, just value is prohibited */
-      return JB_ERR_PARSE;
-   }
-
-   *name = str;
-
-   /* parse option */
-   while (((ch = *str) != '\0') &&
-          (ch != ' ') && (ch != '\t') && (ch != '{'))
-   {
-      if (ch == '}')
-      {
-         /* error, '}' without '{' */
-         return JB_ERR_PARSE;
-      }
-      str++;
-   }
-   *str = '\0';
-
-   if (ch != '{')
-   {
-      /* no value */
-      if (ch == '\0')
-      {
-         /* EOL - be careful not to run off buffer */
-         *line = str;
-      }
-      else
-      {
-         /* More to parse next time. */
-         *line = str + 1;
-      }
-      return JB_ERR_OK;
-   }
-
-   str++;
-   *value = str;
-
-   str = strchr(str, '}');
-   if (str == NULL)
-   {
-      /* error */
-      *value = NULL;
-      return JB_ERR_PARSE;
-   }
-
-   /* got value */
-   *str = '\0';
-   *line = str + 1;
-
-   chomp(*value);
-
-   return JB_ERR_OK;
-}
-
-/*********************************************************************
- *
- * Function    :  action_used_to_be_valid
- *
- * Description :  Checks if unrecognized actions were valid in earlier
- *                releases.
- *
- * Parameters  :
- *          1  :  action = The string containing the action to check.
- *
- * Returns     :  True if yes, otherwise false.
- *
- *********************************************************************/
-static int action_used_to_be_valid(const char *action)
-{
-   static const char *formerly_valid_actions[] = {
-      "inspect-jpegs",
-      "kill-popups",
-      "send-vanilla-wafer",
-      "send-wafer",
-      "treat-forbidden-connects-like-blocks",
-      "vanilla-wafer",
-      "wafer"
-   };
-   unsigned int i;
-
-   for (i = 0; i < SZ(formerly_valid_actions); i++)
-   {
-      if (0 == strcmpic(action, formerly_valid_actions[i]))
-      {
-         return TRUE;
-      }
-   }
-
-   return FALSE;
-}
-
-/*********************************************************************
- *
- * Function    :  get_actions
- *
- * Description :  Parses a list of actions.
- *
- * Parameters  :
- *          1  :  line = The string containing the actions.
- *                       Will be written to by this function.
- *          2  :  alias_list = Custom alias list, or NULL for none.
- *          3  :  cur_action = Where to store the action.  Caller
- *                             allocates memory.
- *
- * Returns     :  JB_ERR_OK => Ok
- *                JB_ERR_PARSE => Parse error (line was trashed anyway)
- *                nonzero => Out of memory (line was trashed anyway)
- *
- *********************************************************************/
-jb_err get_actions(char *line,
-                   struct action_alias * alias_list,
-                   struct action_spec *cur_action)
-{
-   jb_err err;
-   init_action(cur_action);
-   cur_action->mask = ACTION_MASK_ALL;
-
-   while (line)
-   {
-      char * option = NULL;
-      char * value = NULL;
-
-      err = get_action_token(&line, &option, &value);
-      if (err)
-      {
-         return err;
-      }
-
-      if (option)
-      {
-         /* handle option in 'option' */
-
-         /* Check for standard action name */
-         const struct action_name * action = action_names;
-
-         while ( (action->name != NULL) && (0 != strcmpic(action->name, option)) )
-         {
-            action++;
-         }
-         if (action->name != NULL)
-         {
-            /* Found it */
-            cur_action->mask &= action->mask;
-            cur_action->add  &= action->mask;
-            cur_action->add  |= action->add;
-
-            switch (action->takes_value)
-            {
-            case AV_NONE:
-               /* ignore any option. */
-               break;
-            case AV_ADD_STRING:
-               {
-                  /* add single string. */
-
-                  if ((value == NULL) || (*value == '\0'))
-                  {
-                     if (0 != strcmpic(action->name, "block"))
-                     {
-                        /*
-                         * XXX: Temporary backwards compatibility hack.
-                         * XXX: should include line number.
-                         */
-                        value = "No reason specified.";
-                        log_error(LOG_LEVEL_ERROR,
-                           "block action without reason found. This may "
-                           "become a fatal error in future versions.");
-                     }
-                     else
-                     {
-                        return JB_ERR_PARSE;
-                     }
-                  }
-                  /* FIXME: should validate option string here */
-                  freez (cur_action->string[action->index]);
-                  cur_action->string[action->index] = strdup(value);
-                  if (NULL == cur_action->string[action->index])
-                  {
-                     return JB_ERR_MEMORY;
-                  }
-                  break;
-               }
-            case AV_REM_STRING:
-               {
-                  /* remove single string. */
-
-                  freez (cur_action->string[action->index]);
-                  break;
-               }
-            case AV_ADD_MULTI:
-               {
-                  /* append multi string. */
-
-                  struct list * remove_p = cur_action->multi_remove[action->index];
-                  struct list * add_p    = cur_action->multi_add[action->index];
-
-                  if ((value == NULL) || (*value == '\0'))
-                  {
-                     return JB_ERR_PARSE;
-                  }
-
-                  list_remove_item(remove_p, value);
-                  err = enlist_unique(add_p, value, 0);
-                  if (err)
-                  {
-                     return err;
-                  }
-                  break;
-               }
-            case AV_REM_MULTI:
-               {
-                  /* remove multi string. */
-
-                  struct list * remove_p = cur_action->multi_remove[action->index];
-                  struct list * add_p    = cur_action->multi_add[action->index];
-
-                  if ( (value == NULL) || (*value == '\0')
-                     || ((*value == '*') && (value[1] == '\0')) )
-                  {
-                     /*
-                      * no option, or option == "*".
-                      *
-                      * Remove *ALL*.
-                      */
-                     list_remove_all(remove_p);
-                     list_remove_all(add_p);
-                     cur_action->multi_remove_all[action->index] = 1;
-                  }
-                  else
-                  {
-                     /* Valid option - remove only 1 option */
-
-                     if ( !cur_action->multi_remove_all[action->index] )
-                     {
-                        /* there isn't a catch-all in the remove list already */
-                        err = enlist_unique(remove_p, value, 0);
-                        if (err)
-                        {
-                           return err;
-                        }
-                     }
-                     list_remove_item(add_p, value);
-                  }
-                  break;
-               }
-            default:
-               /* Shouldn't get here unless there's memory corruption. */
-               assert(0);
-               return JB_ERR_PARSE;
-            }
-         }
-         else
-         {
-            /* try user aliases. */
-            const struct action_alias * alias = alias_list;
-
-            while ( (alias != NULL) && (0 != strcmpic(alias->name, option)) )
-            {
-               alias = alias->next;
-            }
-            if (alias != NULL)
-            {
-               /* Found it */
-               merge_actions(cur_action, alias->action);
-            }
-            else if (((size_t)2 < strlen(option)) && action_used_to_be_valid(option+1))
-            {
-               log_error(LOG_LEVEL_ERROR, "Action '%s' is no longer valid "
-                  "in this Privoxy release. Ignored.", option+1);
-            }
-            else if (((size_t)2 < strlen(option)) && 0 == strcmpic(option+1, "hide-forwarded-for-headers"))
-            {
-               log_error(LOG_LEVEL_FATAL, "The action 'hide-forwarded-for-headers' "
-                  "is no longer valid in this Privoxy release. "
-                  "Use 'change-x-forwarded-for' instead.");
-            }
-            else
-            {
-               /* Bad action name */
-               /*
-                * XXX: This is a fatal error and Privoxy will later on exit
-                * in load_one_actions_file() because of an "invalid line".
-                *
-                * It would be preferable to name the offending option in that
-                * error message, but currently there is no way to do that and
-                * we have to live with two error messages for basically the
-                * same reason.
-                */
-               log_error(LOG_LEVEL_ERROR, "Unknown action or alias: %s", option);
-               return JB_ERR_PARSE;
-            }
-         }
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  init_current_action
- *
- * Description :  Zero out an action.
- *
- * Parameters  :
- *          1  :  dest = An uninitialized current_action_spec.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void init_current_action (struct current_action_spec *dest)
-{
-   memset(dest, '\0', sizeof(*dest));
-
-   dest->flags = ACTION_MOST_COMPATIBLE;
-}
-
-
-/*********************************************************************
- *
- * Function    :  init_action
- *
- * Description :  Zero out an action.
- *
- * Parameters  :
- *          1  :  dest = An uninitialized action_spec.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void init_action (struct action_spec *dest)
-{
-   memset(dest, '\0', sizeof(*dest));
-}
-
-
-/*********************************************************************
- *
- * Function    :  merge_current_action
- *
- * Description :  Merge two actions together.
- *                Similar to "dest += src".
- *                Differences between this and merge_actions()
- *                is that this one doesn't allocate memory for
- *                strings (so "src" better be in memory for at least
- *                as long as "dest" is, and you'd better free
- *                "dest" using "free_current_action").
- *                Also, there is no  mask or remove lists in dest.
- *                (If we're applying it to a URL, we don't need them)
- *
- * Parameters  :
- *          1  :  dest = Current actions, to modify.
- *          2  :  src = Action to add.
- *
- * Returns  0  :  no error
- *        !=0  :  error, probably JB_ERR_MEMORY.
- *
- *********************************************************************/
-jb_err merge_current_action (struct current_action_spec *dest,
-                             const struct action_spec *src)
-{
-   int i;
-   jb_err err = JB_ERR_OK;
-
-   dest->flags  &= src->mask;
-   dest->flags  |= src->add;
-
-   for (i = 0; i < ACTION_STRING_COUNT; i++)
-   {
-      char * str = src->string[i];
-      if (str)
-      {
-         str = strdup(str);
-         if (!str)
-         {
-            return JB_ERR_MEMORY;
-         }
-         freez(dest->string[i]);
-         dest->string[i] = str;
-      }
-   }
-
-   for (i = 0; i < ACTION_MULTI_COUNT; i++)
-   {
-      if (src->multi_remove_all[i])
-      {
-         /* Remove everything from dest, then add src->multi_add */
-         err = list_duplicate(dest->multi[i], src->multi_add[i]);
-         if (err)
-         {
-            return err;
-         }
-      }
-      else
-      {
-         list_remove_list(dest->multi[i], src->multi_remove[i]);
-         err = list_append_list_unique(dest->multi[i], src->multi_add[i]);
-         if (err)
-         {
-            return err;
-         }
-      }
-   }
-   return err;
-}
-
-#if 0
-/*********************************************************************
- *
- * Function    :  update_action_bits_for_all_tags
- *
- * Description :  Updates the action bits based on all matching tags.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  0 if no tag matched, or
- *                1 otherwise
- *
- *********************************************************************/
-int update_action_bits_for_all_tags(struct client_state *csp)
-{
-   struct list_entry *tag;
-   int updated = 0;
-
-   for (tag = csp->tags->first; tag != NULL; tag = tag->next)
-   {
-      if (update_action_bits_for_tag(csp, tag->str))
-      {
-         updated = 1;
-      }
-   }
-
-   return updated;
-}
-#endif
-
-/*********************************************************************
- *
- * Function    :  update_action_bits_for_tag
- *
- * Description :  Updates the action bits based on the action sections
- *                whose tag patterns match a provided tag.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  tag = The tag on which the update should be based on
- *
- * Returns     :  0 if no tag matched, or
- *                1 otherwise
- *
- *********************************************************************/
-int update_action_bits_for_tag(struct client_state *csp, const char *tag)
-{
-   struct file_list *fl;
-   struct url_actions *b;
-
-   int updated = 0;
-   int i;
-
-   assert(tag);
-   assert(list_contains_item(csp->tags, tag));
-
-   /* Run through all action files, */
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (((fl = csp->actions_list[i]) == NULL) || ((b = fl->f) == NULL))
-      {
-         /* Skip empty files */
-         continue;
-      }
-
-      /* and through all the action patterns, */
-      for (b = b->next; NULL != b; b = b->next)
-      {
-         /* skip the URL patterns, */
-         if (NULL == b->url->tag_regex)
-         {
-            continue;
-         }
-
-         /* and check if one of the tag patterns matches the tag, */
-         if (0 == regexec(b->url->tag_regex, tag, 0, NULL, 0))
-         {
-            /* if it does, update the action bit map, */
-            if (merge_current_action(csp->action, b->action))
-            {
-               log_error(LOG_LEVEL_ERROR,
-                  "Out of memory while changing action bits");
-            }
-            /* and signal the change. */
-            updated = 1;
-         }
-      }
-   }
-
-   return updated;
-}
-
-
-/*********************************************************************
- *
- * Function    :  free_current_action
- *
- * Description :  Free memory used by a current_action_spec.
- *                Does not free the current_action_spec itself.
- *
- * Parameters  :
- *          1  :  src = Source to free.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_current_action (struct current_action_spec *src)
-{
-   int i;
-
-   for (i = 0; i < ACTION_STRING_COUNT; i++)
-   {
-      freez(src->string[i]);
-   }
-
-   for (i = 0; i < ACTION_MULTI_COUNT; i++)
-   {
-      destroy_list(src->multi[i]);
-   }
-
-   memset(src, '\0', sizeof(*src));
-}
-
-
-static struct file_list *current_actions_file[MAX_AF_FILES]  = {
-   NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL
-};
-
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-/*********************************************************************
- *
- * Function    :  unload_current_actions_file
- *
- * Description :  Unloads current actions file - reset to state at
- *                beginning of program.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void unload_current_actions_file(void)
-{
-   int i;
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (current_actions_file[i])
-      {
-         current_actions_file[i]->unloader = unload_actions_file;
-         current_actions_file[i] = NULL;
-      }
-   }
-}
-#endif /* FEATURE_GRACEFUL_TERMINATION */
-
-
-/*********************************************************************
- *
- * Function    :  unload_actions_file
- *
- * Description :  Unloads an actions module.
- *
- * Parameters  :
- *          1  :  file_data = the data structure associated with the
- *                            actions file.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void unload_actions_file(void *file_data)
-{
-   struct url_actions * next;
-   struct url_actions * cur = (struct url_actions *)file_data;
-   while (cur != NULL)
-   {
-      next = cur->next;
-      free_url_spec(cur->url);
-      if ((next == NULL) || (next->action != cur->action))
-      {
-         /*
-          * As the action settings might be shared,
-          * we can only free them if the current
-          * url pattern is the last one, or if the
-          * next one is using different settings.
-          */
-         free_action_spec(cur->action);
-      }
-      freez(cur);
-      cur = next;
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  free_alias_list
- *
- * Description :  Free memory used by a list of aliases.
- *
- * Parameters  :
- *          1  :  alias_list = Linked list to free.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_alias_list(struct action_alias *alias_list)
-{
-   while (alias_list != NULL)
-   {
-      struct action_alias * next = alias_list->next;
-      alias_list->next = NULL;
-      freez(alias_list->name);
-      free_action(alias_list->action);
-      free(alias_list);
-      alias_list = next;
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  load_action_files
- *
- * Description :  Read and parse all the action files and add to files
- *                list.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int load_action_files(struct client_state *csp)
-{
-   int i;
-   int result;
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (csp->config->actions_file[i])
-      {
-         result = load_one_actions_file(csp, i);
-         if (result)
-         {
-            return result;
-         }
-      }
-      else if (current_actions_file[i])
-      {
-         current_actions_file[i]->unloader = unload_actions_file;
-         current_actions_file[i] = NULL;
-      }
-   }
-
-   return 0;
-}
-
-/*********************************************************************
- *
- * Function    :  load_one_actions_file
- *
- * Description :  Read and parse a action file and add to files
- *                list.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  fileid = File index to load.
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-static int load_one_actions_file(struct client_state *csp, int fileid)
-{
-
-   /*
-    * Parser mode.
-    * Note: Keep these in the order they occur in the file, they are
-    * sometimes tested with <=
-    */
-#define MODE_START_OF_FILE 1
-#define MODE_SETTINGS      2
-#define MODE_DESCRIPTION   3
-#define MODE_ALIAS         4
-#define MODE_ACTIONS       5
-
-   int mode = MODE_START_OF_FILE;
-
-   FILE *fp;
-   struct url_actions *last_perm;
-   struct url_actions *perm;
-   char  buf[BUFFER_SIZE];
-   struct file_list *fs;
-   struct action_spec * cur_action = NULL;
-   int cur_action_used = 0;
-   struct action_alias * alias_list = NULL;
-   unsigned long linenum = 0;
-
-   if (!check_file_changed(current_actions_file[fileid], csp->config->actions_file[fileid], &fs))
-   {
-      /* No need to load */
-      csp->actions_list[fileid] = current_actions_file[fileid];
-      return 0;
-   }
-   if (!fs)
-   {
-      log_error(LOG_LEVEL_FATAL, "can't load actions file '%s': %E. "
-         "Note that beginning with Privoxy 3.0.7, actions files have to be specified "
-         "with their complete file names.", csp->config->actions_file[fileid]);
-      return 1; /* never get here */
-   }
-
-   fs->f = last_perm = (struct url_actions *)zalloc(sizeof(*last_perm));
-   if (last_perm == NULL)
-   {
-      log_error(LOG_LEVEL_FATAL, "can't load actions file '%s': out of memory!",
-                csp->config->actions_file[fileid]);
-      return 1; /* never get here */
-   }
-
-   if ((fp = fopen(csp->config->actions_file[fileid], "r")) == NULL)
-   {
-      log_error(LOG_LEVEL_FATAL, "can't load actions file '%s': error opening file: %E",
-                csp->config->actions_file[fileid]);
-      return 1; /* never get here */
-   }
-
-   while (read_config_line(buf, sizeof(buf), fp, &linenum) != NULL)
-   {
-      if (*buf == '{')
-      {
-         /* It's a header block */
-         if (buf[1] == '{')
-         {
-            /* It's {{settings}} or {{alias}} */
-            size_t len = strlen(buf);
-            char * start = buf + 2;
-            char * end = buf + len - 1;
-            if ((len < (size_t)5) || (*end-- != '}') || (*end-- != '}'))
-            {
-               /* too short */
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                  "can't load actions file '%s': invalid line (%lu): %s", 
-                  csp->config->actions_file[fileid], linenum, buf);
-               return 1; /* never get here */
-            }
-
-            /* Trim leading and trailing whitespace. */
-            end[1] = '\0';
-            chomp(start);
-
-            if (*start == '\0')
-            {
-               /* too short */
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                  "can't load actions file '%s': invalid line (%lu): {{ }}",
-                  csp->config->actions_file[fileid], linenum);
-               return 1; /* never get here */
-            }
-
-            /*
-             * An actionsfile can optionally contain the following blocks.
-             * They *MUST* be in this order, to simplify processing:
-             *
-             * {{settings}}
-             * name=value...
-             *
-             * {{description}}
-             * ...free text, format TBD, but no line may start with a '{'...
-             *
-             * {{alias}}
-             * name=actions...
-             *
-             * The actual actions must be *after* these special blocks.
-             * None of these special blocks may be repeated.
-             *
-             */
-            if (0 == strcmpic(start, "settings"))
-            {
-               /* it's a {{settings}} block */
-               if (mode >= MODE_SETTINGS)
-               {
-                  /* {{settings}} must be first thing in file and must only
-                   * appear once.
-                   */
-                  fclose(fp);
-                  log_error(LOG_LEVEL_FATAL,
-                     "can't load actions file '%s': line %lu: {{settings}} must only appear once, and it must be before anything else.",
-                     csp->config->actions_file[fileid], linenum);
-               }
-               mode = MODE_SETTINGS;
-            }
-            else if (0 == strcmpic(start, "description"))
-            {
-               /* it's a {{description}} block */
-               if (mode >= MODE_DESCRIPTION)
-               {
-                  /* {{description}} is a singleton and only {{settings}} may proceed it
-                   */
-                  fclose(fp);
-                  log_error(LOG_LEVEL_FATAL,
-                     "can't load actions file '%s': line %lu: {{description}} must only appear once, and only a {{settings}} block may be above it.",
-                     csp->config->actions_file[fileid], linenum);
-               }
-               mode = MODE_DESCRIPTION;
-            }
-            else if (0 == strcmpic(start, "alias"))
-            {
-               /* it's an {{alias}} block */
-               if (mode >= MODE_ALIAS)
-               {
-                  /* {{alias}} must be first thing in file, possibly after
-                   * {{settings}} and {{description}}
-                   *
-                   * {{alias}} must only appear once.
-                   *
-                   * Note that these are new restrictions introduced in
-                   * v2.9.10 in order to make actionsfile editing simpler.
-                   * (Otherwise, reordering actionsfile entries without
-                   * completely rewriting the file becomes non-trivial)
-                   */
-                  fclose(fp);
-                  log_error(LOG_LEVEL_FATAL,
-                     "can't load actions file '%s': line %lu: {{alias}} must only appear once, and it must be before all actions.",
-                     csp->config->actions_file[fileid], linenum);
-               }
-               mode = MODE_ALIAS;
-            }
-            else
-            {
-               /* invalid {{something}} block */
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                  "can't load actions file '%s': invalid line (%lu): {{%s}}",
-                  csp->config->actions_file[fileid], linenum, start);
-               return 1; /* never get here */
-            }
-         }
-         else
-         {
-            /* It's an actions block */
-
-            char  actions_buf[BUFFER_SIZE];
-            char * end;
-
-            /* set mode */
-            mode    = MODE_ACTIONS;
-
-            /* free old action */
-            if (cur_action)
-            {
-               if (!cur_action_used)
-               {
-                  free_action_spec(cur_action);
-               }
-               cur_action = NULL;
-            }
-            cur_action_used = 0;
-            cur_action = (struct action_spec *)zalloc(sizeof(*cur_action));
-            if (cur_action == NULL)
-            {
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                  "can't load actions file '%s': out of memory",
-                  csp->config->actions_file[fileid]);
-               return 1; /* never get here */
-            }
-            init_action(cur_action);
-
-            /* trim { */
-            strlcpy(actions_buf, buf + 1, sizeof(actions_buf));
-
-            /* check we have a trailing } and then trim it */
-            end = actions_buf + strlen(actions_buf) - 1;
-            if (*end != '}')
-            {
-               /* No closing } */
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                  "can't load actions file '%s': invalid line (%lu): %s",
-                  csp->config->actions_file[fileid], linenum, buf);
-               return 1; /* never get here */
-            }
-            *end = '\0';
-
-            /* trim any whitespace immediately inside {} */
-            chomp(actions_buf);
-
-            if (get_actions(actions_buf, alias_list, cur_action))
-            {
-               /* error */
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                  "can't load actions file '%s': invalid line (%lu): %s",
-                  csp->config->actions_file[fileid], linenum, buf);
-               return 1; /* never get here */
-            }
-         }
-      }
-      else if (mode == MODE_SETTINGS)
-      {
-         /*
-          * Part of the {{settings}} block.
-          * For now only serves to check if the file's minimum Privoxy
-          * version requirement is met, but we may want to read & check
-          * permissions when we go multi-user.
-          */
-         if (!strncmp(buf, "for-privoxy-version=", 20))
-         {
-            char *version_string, *fields[3];
-            int num_fields;
-
-            if ((version_string = strdup(buf + 20)) == NULL)
-            {
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                         "can't load actions file '%s': out of memory!",
-                         csp->config->actions_file[fileid]);
-               return 1; /* never get here */
-            }
-            
-            num_fields = ssplit(version_string, ".", fields, 3, TRUE, FALSE);
-
-            if (num_fields < 1 || atoi(fields[0]) == 0)
-            {
-               log_error(LOG_LEVEL_ERROR,
-                 "While loading actions file '%s': invalid line (%lu): %s",
-                  csp->config->actions_file[fileid], linenum, buf);
-            }
-            else if (                      atoi(fields[0]) > VERSION_MAJOR
-                     || (num_fields > 1 && atoi(fields[1]) > VERSION_MINOR)
-                     || (num_fields > 2 && atoi(fields[2]) > VERSION_POINT))
-            {
-               fclose(fp);
-               log_error(LOG_LEVEL_FATAL,
-                         "Actions file '%s', line %lu requires newer Privoxy version: %s",
-                         csp->config->actions_file[fileid], linenum, buf );
-               return 1; /* never get here */
-            }
-            free(version_string);
-         }
-      }
-      else if (mode == MODE_DESCRIPTION)
-      {
-         /*
-          * Part of the {{description}} block.
-          * Ignore for now.
-          */
-      }
-      else if (mode == MODE_ALIAS)
-      {
-         /*
-          * define an alias
-          */
-         char  actions_buf[BUFFER_SIZE];
-         struct action_alias * new_alias;
-
-         char * start = strchr(buf, '=');
-         char * end = start;
-
-         if ((start == NULL) || (start == buf))
-         {
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': invalid alias line (%lu): %s",
-               csp->config->actions_file[fileid], linenum, buf);
-            return 1; /* never get here */
-         }
-
-         if ((new_alias = zalloc(sizeof(*new_alias))) == NULL)
-         {
-            fclose(fp);
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': out of memory!",
-               csp->config->actions_file[fileid]);
-            return 1; /* never get here */
-         }
-
-         /* Eat any the whitespace before the '=' */
-         end--;
-         while ((*end == ' ') || (*end == '\t'))
-         {
-            /*
-             * we already know we must have at least 1 non-ws char
-             * at start of buf - no need to check
-             */
-            end--;
-         }
-         end[1] = '\0';
-
-         /* Eat any the whitespace after the '=' */
-         start++;
-         while ((*start == ' ') || (*start == '\t'))
-         {
-            start++;
-         }
-         if (*start == '\0')
-         {
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': invalid alias line (%lu): %s",
-               csp->config->actions_file[fileid], linenum, buf);
-            return 1; /* never get here */
-         }
-
-         if ((new_alias->name = strdup(buf)) == NULL)
-         {
-            fclose(fp);
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': out of memory!",
-               csp->config->actions_file[fileid]);
-            return 1; /* never get here */
-         }
-
-         strlcpy(actions_buf, start, sizeof(actions_buf));
-
-         if (get_actions(actions_buf, alias_list, new_alias->action))
-         {
-            /* error */
-            fclose(fp);
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': invalid alias line (%lu): %s = %s",
-               csp->config->actions_file[fileid], linenum, buf, start);
-            return 1; /* never get here */
-         }
-
-         /* add to list */
-         new_alias->next = alias_list;
-         alias_list = new_alias;
-      }
-      else if (mode == MODE_ACTIONS)
-      {
-         /* it's a URL pattern */
-
-         /* allocate a new node */
-         if ((perm = zalloc(sizeof(*perm))) == NULL)
-         {
-            fclose(fp);
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': out of memory!",
-               csp->config->actions_file[fileid]);
-            return 1; /* never get here */
-         }
-
-         perm->action = cur_action;
-         cur_action_used = 1;
-
-         /* Save the URL pattern */
-         if (create_url_spec(perm->url, buf))
-         {
-            fclose(fp);
-            log_error(LOG_LEVEL_FATAL,
-               "can't load actions file '%s': line %lu: cannot create URL pattern from: %s",
-               csp->config->actions_file[fileid], linenum, buf);
-            return 1; /* never get here */
-         }
-
-         /* add it to the list */
-         last_perm->next = perm;
-         last_perm = perm;
-      }
-      else if (mode == MODE_START_OF_FILE)
-      {
-         /* oops - please have a {} line as 1st line in file. */
-         fclose(fp);
-         log_error(LOG_LEVEL_FATAL,
-            "can't load actions file '%s': first needed line (%lu) is invalid: %s",
-            csp->config->actions_file[fileid], linenum, buf);
-         return 1; /* never get here */
-      }
-      else
-      {
-         /* How did we get here? This is impossible! */
-         fclose(fp);
-         log_error(LOG_LEVEL_FATAL,
-            "can't load actions file '%s': INTERNAL ERROR - mode = %d",
-            csp->config->actions_file[fileid], mode);
-         return 1; /* never get here */
-      }
-   }
-
-   fclose(fp);
-
-   if (!cur_action_used)
-   {
-      free_action_spec(cur_action);
-   }
-   free_alias_list(alias_list);
-
-   /* the old one is now obsolete */
-   if (current_actions_file[fileid])
-   {
-      current_actions_file[fileid]->unloader = unload_actions_file;
-   }
-
-   fs->next    = files->next;
-   files->next = fs;
-   current_actions_file[fileid] = fs;
-
-   csp->actions_list[fileid] = fs;
-
-   return(0);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  actions_to_text
- *
- * Description :  Converts a actionsfile entry from the internal
- *                structure into a text line.  The output is split
- *                into one line for each action with line continuation. 
- *
- * Parameters  :
- *          1  :  action = The action to format.
- *
- * Returns     :  A string.  Caller must free it.
- *                NULL on out-of-memory error.
- *
- *********************************************************************/
-char * actions_to_text(const struct action_spec *action)
-{
-   unsigned long mask = action->mask;
-   unsigned long add  = action->add;
-   char *result = strdup("");
-   struct list_entry * lst;
-
-   /* sanity - prevents "-feature +feature" */
-   mask |= add;
-
-
-#define DEFINE_ACTION_BOOL(__name, __bit)          \
-   if (!(mask & __bit))                            \
-   {                                               \
-      string_append(&result, " -" __name " \\\n"); \
-   }                                               \
-   else if (add & __bit)                           \
-   {                                               \
-      string_append(&result, " +" __name " \\\n"); \
-   }
-
-#define DEFINE_ACTION_STRING(__name, __bit, __index)   \
-   if (!(mask & __bit))                                \
-   {                                                   \
-      string_append(&result, " -" __name " \\\n");     \
-   }                                                   \
-   else if (add & __bit)                               \
-   {                                                   \
-      string_append(&result, " +" __name "{");         \
-      string_append(&result, action->string[__index]); \
-      string_append(&result, "} \\\n");                \
-   }
-
-#define DEFINE_ACTION_MULTI(__name, __index)         \
-   if (action->multi_remove_all[__index])            \
-   {                                                 \
-      string_append(&result, " -" __name " \\\n");   \
-   }                                                 \
-   else                                              \
-   {                                                 \
-      lst = action->multi_remove[__index]->first;    \
-      while (lst)                                    \
-      {                                              \
-         string_append(&result, " -" __name "{");    \
-         string_append(&result, lst->str);           \
-         string_append(&result, "} \\\n");           \
-         lst = lst->next;                            \
-      }                                              \
-   }                                                 \
-   lst = action->multi_add[__index]->first;          \
-   while (lst)                                       \
-   {                                                 \
-      string_append(&result, " +" __name "{");       \
-      string_append(&result, lst->str);              \
-      string_append(&result, "} \\\n");              \
-      lst = lst->next;                               \
-   }
-
-#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */
-
-#include "actionlist.h"
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-
-   return result;
-}
-
-
-/*********************************************************************
- *
- * Function    :  actions_to_html
- *
- * Description :  Converts a actionsfile entry from numeric form
- *                ("mask" and "add") to a <br>-seperated HTML string
- *                in which each action is linked to its chapter in
- *                the user manual.
- *
- * Parameters  :
- *          1  :  csp    = Client state (for config)
- *          2  :  action = Action spec to be converted
- *
- * Returns     :  A string.  Caller must free it.
- *                NULL on out-of-memory error.
- *
- *********************************************************************/
-char * actions_to_html(const struct client_state *csp,
-                       const struct action_spec *action)
-{
-   unsigned long mask = action->mask;
-   unsigned long add  = action->add;
-   char *result = strdup("");
-   struct list_entry * lst;
-
-   /* sanity - prevents "-feature +feature" */
-   mask |= add;
-
-
-#define DEFINE_ACTION_BOOL(__name, __bit)       \
-   if (!(mask & __bit))                         \
-   {                                            \
-      string_append(&result, "\n<br>-");        \
-      string_join(&result, add_help_link(__name, csp->config)); \
-   }                                            \
-   else if (add & __bit)                        \
-   {                                            \
-      string_append(&result, "\n<br>+");        \
-      string_join(&result, add_help_link(__name, csp->config)); \
-   }
-
-#define DEFINE_ACTION_STRING(__name, __bit, __index) \
-   if (!(mask & __bit))                              \
-   {                                                 \
-      string_append(&result, "\n<br>-");             \
-      string_join(&result, add_help_link(__name, csp->config)); \
-   }                                                 \
-   else if (add & __bit)                             \
-   {                                                 \
-      string_append(&result, "\n<br>+");             \
-      string_join(&result, add_help_link(__name, csp->config)); \
-      string_append(&result, "{");                   \
-      string_join(&result, html_encode(action->string[__index])); \
-      string_append(&result, "}");                   \
-   }
-
-#define DEFINE_ACTION_MULTI(__name, __index)          \
-   if (action->multi_remove_all[__index])             \
-   {                                                  \
-      string_append(&result, "\n<br>-");              \
-      string_join(&result, add_help_link(__name, csp->config)); \
-   }                                                  \
-   else                                               \
-   {                                                  \
-      lst = action->multi_remove[__index]->first;     \
-      while (lst)                                     \
-      {                                               \
-         string_append(&result, "\n<br>-");           \
-         string_join(&result, add_help_link(__name, csp->config)); \
-         string_append(&result, "{");                 \
-         string_join(&result, html_encode(lst->str)); \
-         string_append(&result, "}");                 \
-         lst = lst->next;                             \
-      }                                               \
-   }                                                  \
-   lst = action->multi_add[__index]->first;           \
-   while (lst)                                        \
-   {                                                  \
-      string_append(&result, "\n<br>+");              \
-      string_join(&result, add_help_link(__name, csp->config)); \
-      string_append(&result, "{");                    \
-      string_join(&result, html_encode(lst->str));    \
-      string_append(&result, "}");                    \
-      lst = lst->next;                                \
-   }
-
-#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */
-
-#include "actionlist.h"
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-
-   /* trim leading <br> */
-   if (result && *result)
-   {
-      char * s = result;
-      result = strdup(result + 5);
-      free(s);
-   }
-
-   return result;
-}
-
-
-/*********************************************************************
- *
- * Function    :  current_actions_to_html
- *
- * Description :  Converts a curren action spec to a <br> seperated HTML
- *                text in which each action is linked to its chapter in
- *                the user manual.
- *
- * Parameters  :
- *          1  :  csp    = Client state (for config) 
- *          2  :  action = Current action spec to be converted
- *
- * Returns     :  A string.  Caller must free it.
- *                NULL on out-of-memory error.
- *
- *********************************************************************/
-char *current_action_to_html(const struct client_state *csp,
-                             const struct current_action_spec *action)
-{
-   unsigned long flags  = action->flags;
-   struct list_entry * lst;
-   char *result   = strdup("");
-   char *active   = strdup("");
-   char *inactive = strdup("");
-
-#define DEFINE_ACTION_BOOL(__name, __bit)  \
-   if (flags & __bit)                      \
-   {                                       \
-      string_append(&active, "\n<br>+");   \
-      string_join(&active, add_help_link(__name, csp->config)); \
-   }                                       \
-   else                                    \
-   {                                       \
-      string_append(&inactive, "\n<br>-"); \
-      string_join(&inactive, add_help_link(__name, csp->config)); \
-   }
-
-#define DEFINE_ACTION_STRING(__name, __bit, __index)   \
-   if (flags & __bit)                                  \
-   {                                                   \
-      string_append(&active, "\n<br>+");               \
-      string_join(&active, add_help_link(__name, csp->config)); \
-      string_append(&active, "{");                     \
-      string_join(&active, html_encode(action->string[__index])); \
-      string_append(&active, "}");                     \
-   }                                                   \
-   else                                                \
-   {                                                   \
-      string_append(&inactive, "\n<br>-");             \
-      string_join(&inactive, add_help_link(__name, csp->config)); \
-   }
-
-#define DEFINE_ACTION_MULTI(__name, __index)           \
-   lst = action->multi[__index]->first;                \
-   if (lst == NULL)                                    \
-   {                                                   \
-      string_append(&inactive, "\n<br>-");             \
-      string_join(&inactive, add_help_link(__name, csp->config)); \
-   }                                                   \
-   else                                                \
-   {                                                   \
-      while (lst)                                      \
-      {                                                \
-         string_append(&active, "\n<br>+");            \
-         string_join(&active, add_help_link(__name, csp->config)); \
-         string_append(&active, "{");                  \
-         string_join(&active, html_encode(lst->str));  \
-         string_append(&active, "}");                  \
-         lst = lst->next;                              \
-      }                                                \
-   }
-
-#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */
-
-#include "actionlist.h"
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-
-   if (active != NULL)
-   {
-      string_append(&result, active);
-      freez(active);
-   }
-   string_append(&result, "\n<br>");
-   if (inactive != NULL)
-   {
-      string_append(&result, inactive);
-      freez(inactive);
-   }
-   return result;
-}
diff --git a/external/privoxy/actions.h b/external/privoxy/actions.h
deleted file mode 100644
index 733a853..0000000
--- a/external/privoxy/actions.h
+++ /dev/null
@@ -1,187 +0,0 @@
-#ifndef ACTIONS_H_INCLUDED
-#define ACTIONS_H_INCLUDED
-#define ACTIONS_H_VERSION "$Id: actions.h,v 1.18 2008/03/30 14:52:00 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/actions.h,v $
- *
- * Purpose     :  Declares functions to work with actions files
- *                Functions declared include: FIXME
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: actions.h,v $
- *    Revision 1.18  2008/03/30 14:52:00  fabiankeil
- *    Rename load_actions_file() and load_re_filterfile()
- *    as they load multiple files "now".
- *
- *    Revision 1.17  2008/01/28 20:17:40  fabiankeil
- *    - Mark some parameters as immutable.
- *    - Hide update_action_bits_for_all_tags() while it's unused.
- *
- *    Revision 1.16  2007/04/17 18:21:45  fabiankeil
- *    Split update_action_bits() into
- *    update_action_bits_for_all_tags()
- *    and update_action_bits_for_tag().
- *
- *    Revision 1.15  2007/04/15 16:39:20  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.14  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.12  2002/05/06 07:56:50  oes
- *    Made actions_to_html independent of FEATURE_CGI_EDIT_ACTIONS
- *
- *    Revision 1.11  2002/04/30 11:14:52  oes
- *    Made csp the first parameter in *action_to_html
- *
- *    Revision 1.10  2002/04/26 12:53:33  oes
- *     -  actions_to_html signature change
- *     -  current_action_to_text: renamed to current_action_to_html
- *        and signature change
- *
- *    Revision 1.9  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.8  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.7  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.6  2001/10/23 21:30:30  jongfoster
- *    Adding error-checking to selected functions.
- *
- *    Revision 1.5  2001/10/14 21:58:22  jongfoster
- *    Adding support for the CGI-based editor:
- *    - Exported get_actions()
- *    - Added new function free_alias_list()
- *    - Added support for {{settings}} and {{description}} blocks
- *      in the actions file.  They are currently ignored.
- *    - Added restriction to only one {{alias}} block which must appear
- *      first in the file, to simplify the editor's rewriting rules.
- *    - Note that load_actions_file() is no longer used by the CGI-based
- *      editor, but some of the other routines in this file are.
- *
- *    Revision 1.4  2001/09/16 15:47:37  jongfoster
- *    First version of CGI-based edit interface.  This is very much a
- *    work-in-progress, and you can't actually use it to edit anything
- *    yet.  You must #define FEATURE_CGI_EDIT_ACTIONS for these changes
- *    to have any effect.
- *
- *    Revision 1.3  2001/09/14 00:17:32  jongfoster
- *    Tidying up memory allocation. New function init_action().
- *
- *    Revision 1.2  2001/07/29 19:01:11  jongfoster
- *    Changed _FILENAME_H to FILENAME_H_INCLUDED.
- *    Added forward declarations for needed structures.
- *
- *    Revision 1.1  2001/05/31 21:16:46  jongfoster
- *    Moved functions to process the action list into this new file.
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-struct action_spec;
-struct current_action_spec;
-struct client_state;
-
-
-
-/* This structure is used to hold user-defined aliases */
-struct action_alias
-{
-   const char * name;
-   struct action_spec action[1];
-   struct action_alias * next;
-};
-
-
-extern jb_err get_actions (char *line, 
-                           struct action_alias * alias_list,
-                           struct action_spec *cur_action);
-extern void free_alias_list(struct action_alias *alias_list);
-
-extern void init_action(struct action_spec *dest);
-extern void free_action(struct action_spec *src);
-extern jb_err merge_actions (struct action_spec *dest, 
-                             const struct action_spec *src);
-#if 0
-extern int update_action_bits_for_all_tags(struct client_state *csp);
-#endif
-extern int update_action_bits_for_tag(struct client_state *csp, const char *tag);
-extern jb_err copy_action (struct action_spec *dest, 
-                           const struct action_spec *src);
-extern char * actions_to_text     (const struct action_spec *action);
-extern char * actions_to_html     (const struct client_state *csp,
-                                   const struct action_spec *action);
-extern void init_current_action     (struct current_action_spec *dest);
-extern void free_current_action     (struct current_action_spec *src);
-extern jb_err merge_current_action  (struct current_action_spec *dest, 
-                                     const struct action_spec *src);
-extern char * current_action_to_html(const struct client_state *csp,
-                                     const struct current_action_spec *action);
-
-extern jb_err get_action_token(char **line, char **name, char **value);
-extern void unload_actions_file(void *file_data);
-extern int load_action_files(struct client_state *csp);
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-void unload_current_actions_file(void);
-#endif
-
-
-/* Revision control strings from this header and associated .c file */
-extern const char actions_rcs[];
-extern const char actions_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef ACTIONS_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
-
diff --git a/external/privoxy/amiga.c b/external/privoxy/amiga.c
deleted file mode 100644
index 68193fb..0000000
--- a/external/privoxy/amiga.c
+++ /dev/null
@@ -1,341 +0,0 @@
-const char amiga_rcs[] = "$Id: amiga.c,v 1.12 2007/01/07 07:40:52 joergs Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/amiga.c,v $
- *
- * Purpose     :  Amiga-specific declarations.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: amiga.c,v $
- *    Revision 1.12  2007/01/07 07:40:52  joergs
- *    Added AmigaOS4 support and made it work on AmigaOS 3.x with current sources.
- *
- *    Revision 1.11  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.9  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.8  2002/03/25 19:32:15  joergs
- *    Name in version string changed from junkbuster to Privoxy.
- *
- *    Revision 1.7  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.6  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.5  2002/03/03 09:18:03  joergs
- *    Made jumbjuster work on AmigaOS again.
- *
- *    Revision 1.4  2001/10/07 15:35:13  oes
- *    Replaced 6 boolean members of csp with one bitmap (csp->flags)
- *
- *    Revision 1.3  2001/09/12 22:54:51  joergs
- *    Stacksize of main thread increased.
- *
- *    Revision 1.2  2001/05/23 00:13:58  joergs
- *    AmigaOS support fixed.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:46  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#ifdef AMIGA
-
-#include <stdio.h>
-#include <signal.h>
-
-#include "project.h"
-
-const char amiga_h_rcs[] = AMIGA_H_VERSION;
-
-static char *ver USED = "$VER: Privoxy " __AMIGAVERSION__ " (" __AMIGADATE__ ")";
-#ifdef __amigaos4__
-static char *stack USED = "$STACK: 524288";
-#else
-unsigned long __stack = 100*1024;
-#endif
-struct Task *main_task = NULL;
-int childs = 0;
-
-void serve(struct client_state *csp);
-
-SAVEDS ULONG server_thread(void)
-{
-   struct client_state *local_csp;
-   struct UserData UserData;
-   struct Task *me=FindTask(NULL);
-#ifdef __amigaos4__
-   struct Library *SocketBase;
-#endif
-
-   Wait(SIGF_SINGLE);
-   local_csp=(struct client_state *)(me->tc_UserData);
-   me->tc_UserData=&UserData;
-   SocketBase=(APTR)OpenLibrary("bsdsocket.library",3);
-   if (SocketBase)
-#ifdef __amigaos4__
-   {
-      ISocket = (struct SocketIFace *)GetInterface(SocketBase, "main", 1, NULL);
-   }
-   if (ISocket)
-#endif
-   {
-      SetErrnoPtr(&(UserData.eno),sizeof(int));
-      local_csp->cfd=ObtainSocket(local_csp->cfd, AF_INET, SOCK_STREAM, 0);
-      if(JB_INVALID_SOCKET!=local_csp->cfd)
-      {
-         Signal(main_task,SIGF_SINGLE);
-         serve((struct client_state *) local_csp);
-      } else {
-         local_csp->flags &= ~CSP_FLAG_ACTIVE;
-         Signal(main_task,SIGF_SINGLE);
-      }
-#ifdef __amigaos4__
-      DropInterface((struct Interface *)ISocket);
-#endif
-      CloseLibrary(SocketBase);
-   } else {
-#ifdef __amigaos4__
-      CloseLibrary(SocketBase);
-#endif
-      local_csp->flags &= ~CSP_FLAG_ACTIVE;
-      Signal(main_task,SIGF_SINGLE);
-   }
-   childs--;
-   return 0;
-}
-
-static BPTR olddir;
-
-void amiga_exit(void)
-{
-#ifdef __amigaos4__
-   if (ISocket)
-#else
-   if (SocketBase)
-#endif
-   {
-#ifdef __amigaos4__
-      struct Library *SocketBase = ISocket->Data.LibBase;
-      DropInterface((struct Interface *)ISocket);
-#endif
-      CloseLibrary(SocketBase);
-   }
-   CurrentDir(olddir);
-}
-
-#ifndef __amigaos4__
-static struct SignalSemaphore memsem;
-static struct SignalSemaphore *memsemptr = NULL;
-#endif
-static struct UserData GlobalUserData;
-
-void InitAmiga(void)
-{
-#ifdef __amigaos4__
-   struct Library *SocketBase;
-#endif
-
-   main_task = FindTask(NULL);
-   main_task->tc_UserData = &GlobalUserData;
-
-   if (((struct Library *)SysBase)->lib_Version < 39)
-   {
-      exit(RETURN_FAIL);
-   }
-
-   signal(SIGINT,SIG_IGN);
-   SocketBase = (APTR)OpenLibrary("bsdsocket.library",3);
-#ifdef __amigaos4__
-   if (SocketBase)
-   {
-      ISocket = (struct SocketIFace *)GetInterface(SocketBase, "main", 1, NULL);
-   }
-   if (!ISocket)
-#else
-   if (!SocketBase)
-#endif
-   {
-#ifdef __amigaos4__
-      CloseLibrary(SocketBase);
-#endif
-      fprintf(stderr, "Can't open bsdsocket.library V3+\n");
-      exit(RETURN_ERROR);
-   }
-   SetErrnoPtr(&(GlobalUserData.eno),sizeof(int));
-#ifndef __amigaos4__
-   InitSemaphore(&memsem);
-   memsemptr = &memsem;
-#endif
-
-   olddir=CurrentDir(GetProgramDir());
-   atexit(amiga_exit);
-}
-
-#ifndef __amigaos4__
-#ifdef __GNUC__
-#ifdef libnix
-/* multithreadingsafe libnix replacements */
-static void *memPool=NULL;
-
-void *malloc (size_t s)
-{
-   ULONG *mem;
-   LONG size = s;
-
-   if (size<=0)
-   {
-      return NULL;
-   }
-   if (!memPool)
-   {
-      if (!(memPool=CreatePool(MEMF_ANY,32*1024,8*1024)))
-      {
-         return NULL;
-      }
-   }
-   size += sizeof(ULONG) + MEM_BLOCKMASK;
-   size &= ~MEM_BLOCKMASK;
-   if (memsemptr)
-   {
-      ObtainSemaphore(memsemptr);
-   }
-   if ((mem=AllocPooled(memPool,size)))
-   {
-      *mem++=size;
-   }
-   if (memsemptr)
-   {
-      ReleaseSemaphore(memsemptr);
-   }
-   return mem;
-}
-
-void free (void *m)
-{
-   ULONG *mem = m;
-
-   if(mem && memPool)
-   {
-      ULONG size=*--mem;
-
-      if (memsemptr)
-      {
-         ObtainSemaphore(memsemptr);
-      }
-      FreePooled(memPool,mem,size);
-      if (memsemptr)
-      {
-         ReleaseSemaphore(memsemptr);
-      }
-   }
-}
-
-void *realloc (void *old, size_t ns)
-{
-   void *new;
-   LONG osize, *o = old;
-   LONG nsize = ns;
-
-   if (!old)
-   {
-      return malloc(nsize);
-   }
-   osize = (*(o-1)) - sizeof(ULONG);
-   if (nsize <= osize)
-   {
-      return old;
-   }
-   if ((new = malloc(nsize)))
-   {
-      ULONG *n = new;
-
-      osize >>= 2;
-      while(osize--)
-      {
-         *n++ = *o++;
-      }
-      free(old);
-   }
-   return new;
-}
-
-void __memCleanUp (void)
-{
-   if (memsemptr)
-   {
-      ObtainSemaphore(memsemptr);
-   }
-   if (memPool)
-   {
-      DeletePool(memPool);
-   }
-   if (memsemptr)
-   {
-      ReleaseSemaphore(memsemptr);
-   }
-}
-
-#define ADD2LIST(a,b,c) asm(".stabs \"_" #b "\"," #c ",0,0,_" #a )
-#define ADD2EXIT(a,pri) ADD2LIST(a,__EXIT_LIST__,22); \
-                        asm(".stabs \"___EXIT_LIST__\",20,0,0," #pri "+128")
-ADD2EXIT(__memCleanUp,-50);
-#elif !defined(ixemul)
-#error No libnix and no ixemul!?
-#endif /* libnix */
-#else
-#error Only GCC is supported, multithreading safe malloc/free required.
-#endif /* __GNUC__ */
-#endif /* !__amigaos4__ */
-
-#endif /* def AMIGA */
diff --git a/external/privoxy/amiga.h b/external/privoxy/amiga.h
deleted file mode 100644
index 43ebda6..0000000
--- a/external/privoxy/amiga.h
+++ /dev/null
@@ -1,176 +0,0 @@
-#ifdef AMIGA
-#ifndef AMIGA_H_INCLUDED
-#define AMIGA_H_INCLUDED
-#define AMIGA_H_VERSION "$Id: amiga.h,v 1.12 2007/01/07 07:40:52 joergs Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/amiga.h,v $
- *
- * Purpose     :  Amiga-specific declarations.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: amiga.h,v $
- *    Revision 1.12  2007/01/07 07:40:52  joergs
- *    Added AmigaOS4 support and made it work on AmigaOS 3.x with current sources.
- *
- *    Revision 1.11  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.9  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.8  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.7  2002/03/03 09:18:03  joergs
- *    Made jumbjuster work on AmigaOS again.
- *
- *    Revision 1.6  2001/10/13 12:46:08  joergs
- *    Added #undef EINTR to avoid warnings
- *
- *    Revision 1.5  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.4  2001/05/29 20:05:06  joergs
- *    Fixed exit() macro not exiting if called before InitAmiga()
- *    (junkbuster --help and --version).
- *
- *    Revision 1.3  2001/05/25 21:53:27  jongfoster
- *    Fixing indentation
- *
- *    Revision 1.2  2001/05/23 00:13:58  joergs
- *    AmigaOS support fixed.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:46  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#define _KERNEL
-#include <sys/socket.h>
-#undef _KERNEL
-
-#define __NOLIBBASE__
-#define __NOGLOBALIFACE__
-#include <proto/socket.h>
-#undef __NOLIBBASE__
-#undef __NOGLOBALIFACE__
-
-#define __CONSTLIBBASEDECL__ const
-#include <proto/exec.h>
-#include <exec/tasks.h>
-#include <proto/dos.h>
-#include <dos/dostags.h>
-
-struct UserData
-{
-#ifdef __amigaos4__
-   struct SocketIFace *si;
-#else
-   struct Library *sb;
-#endif
-   int eno;
-};
-
-#ifdef __amigaos4__
-#define ISocket (((struct UserData *)(FindTask(NULL)->tc_UserData))->si)
-#undef errno
-#else
-#define SocketBase ((struct Library *)(((struct UserData *)(FindTask(NULL)->tc_UserData))->sb))
-#endif
-#define errno (((struct UserData *)(FindTask(NULL)->tc_UserData))->eno)
-#define select(a,b,c,d,e) WaitSelect(a,b,c,d,e,NULL)
-#define inet_ntoa(x) Inet_NtoA(x.s_addr)
-
-extern int childs;
-extern struct Task *main_task;
-
-void InitAmiga(void);
-void amiga_exit(void);
-void __memCleanUp(void);
-SAVEDS ULONG server_thread(void);
-
-#ifdef __amigaos4__
-#define exit(x)                                             \
-{                                                           \
-   if(main_task)                                            \
-   {                                                        \
-      if(main_task == FindTask(NULL))                       \
-      {                                                     \
-         while(childs) Delay(10*TICKS_PER_SECOND); exit(x); \
-      }                                                     \
-      else                                                  \
-      {                                                     \
-         if (ISocket)                                       \
-         {                                                  \
-             struct Library *sb = ISocket->Data.LibBase;    \
-             DropInterface((struct Interface *)ISocket);    \
-             CloseLibrary(sb);                              \
-         }                                                  \
-         childs--;                                          \
-         RemTask(NULL);                                     \
-      }                                                     \
-   }                                                        \
-   else                                                     \
-   {                                                        \
-      exit(x);                                              \
-   }                                                        \
-}
-#else
-#define exit(x)                                             \
-{                                                           \
-   if(main_task)                                            \
-   {                                                        \
-      if(main_task == FindTask(NULL))                       \
-      {                                                     \
-         while(childs) Delay(10*TICKS_PER_SECOND); exit(x); \
-      }                                                     \
-      else                                                  \
-      {                                                     \
-         CloseLibrary(SocketBase);                          \
-         childs--;                                          \
-         RemTask(NULL);                                     \
-      }                                                     \
-   }                                                        \
-   else                                                     \
-   {                                                        \
-      exit(x);                                              \
-   }                                                        \
-}
-
-#undef HAVE_RANDOM
-#define h_errno 0
-#define HAVE_TIMEGM
-#define timegm(tm) mktime(tm)
-#endif /* __amigaos4__ */
-
-#undef EINTR
-#define EINTR 0
-
-#endif /* ndef AMIGA_H_INCLUDED */
-#endif /* def AMIGA */
diff --git a/external/privoxy/cgi.c b/external/privoxy/cgi.c
deleted file mode 100644
index 61ff069..0000000
--- a/external/privoxy/cgi.c
+++ /dev/null
@@ -1,2987 +0,0 @@
-const char cgi_rcs[] = "$Id: cgi.c,v 1.116 2009/03/15 14:59:34 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cgi.c,v $
- *
- * Purpose     :  Declares functions to intercept request, generate
- *                html or gif answers, and to compose HTTP resonses.
- *                This only contains the framework functions, the
- *                actual handler functions are declared elsewhere.
- *                
- *                Functions declared include:
- * 
- *
- * Copyright   :  Written by and Copyright (C) 2001-2004, 2006-2008
- *                the SourceForge Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cgi.c,v $
- *    Revision 1.116  2009/03/15 14:59:34  fabiankeil
- *    Cosmetics.
- *
- *    Revision 1.115  2009/03/01 18:28:23  fabiankeil
- *    Help clang understand that we aren't dereferencing
- *    NULL pointers here.
- *
- *    Revision 1.114  2008/12/04 18:15:04  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.113  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.112  2008/08/31 16:08:12  fabiankeil
- *    "View the request headers" isn't more equal than the other
- *    menu items and thus doesn't need a trailing dot either.
- *
- *    Revision 1.111  2008/08/31 15:59:02  fabiankeil
- *    There's no reason to let remote toggling support depend
- *    on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't.
- *
- *    Revision 1.110  2008/08/31 14:55:43  fabiankeil
- *    Add a @date@ symbol to include a date(1)-like time string
- *    in templates. Modified version of the patch Endre Szabo
- *    submitted in #2026468.
- *
- *    Revision 1.109  2008/07/26 09:40:27  fabiankeil
- *    Remove the unconditional block in get_http_time().
- *    It's pointless now that it's no longer used to limit
- *    dummy's scope. While at it, remove obvious comments
- *    and a trailing space.
- *
- *    Revision 1.108  2008/05/26 17:30:53  fabiankeil
- *    Provide an OpenSearch Description to access the
- *    show-url-info page through "search engine plugins".
- *
- *    Revision 1.107  2008/05/26 16:23:19  fabiankeil
- *    - Fix spelling in template-not-found message.
- *    - Declare referrer_is_safe()'s alternative_prefix[] static.
- *
- *    Revision 1.106  2008/05/21 15:24:38  fabiankeil
- *    Mark csp as immutable for a bunch of functions.
- *
- *    Revision 1.105  2008/04/17 14:40:47  fabiankeil
- *    Provide get_http_time() with the buffer size so it doesn't
- *    have to blindly assume that the buffer is big enough.
- *
- *    Revision 1.104  2008/03/26 18:07:06  fabiankeil
- *    Add hostname directive. Closes PR#1918189.
- *
- *    Revision 1.103  2008/03/21 11:13:57  fabiankeil
- *    Only gather host information if it's actually needed.
- *    Also move the code out of accept_connection() so it's less likely
- *    to delay other incoming connections if the host is misconfigured.
- *
- *    Revision 1.102  2008/02/23 16:33:43  fabiankeil
- *    Let forward_url() use the standard parameter ordering
- *    and mark its second parameter immutable.
- *
- *    Revision 1.101  2008/02/03 15:45:06  fabiankeil
- *    Add SOCKS5 support for "Forwarding failure" CGI page.
- *
- *    Revision 1.100  2007/10/17 18:40:53  fabiankeil
- *    - Send CGI pages as HTTP/1.1 unless the client asked for HTTP/1.0.
- *    - White space fix.
- *
- *    Revision 1.99  2007/08/05 13:42:22  fabiankeil
- *    #1763173 from Stefan Huehner: declare some more functions static.
- *
- *    Revision 1.98  2007/05/14 10:33:51  fabiankeil
- *    - Use strlcpy() and strlcat() instead of strcpy() and strcat().
- *
- *    Revision 1.97  2007/04/09 18:11:35  fabiankeil
- *    Don't mistake VC++'s _snprintf() for a snprintf() replacement.
- *
- *    Revision 1.96  2007/03/08 17:41:05  fabiankeil
- *    Use sizeof() more often.
- *
- *    Revision 1.95  2007/02/10 17:01:37  fabiankeil
- *    Don't overlook map result for the forwarding-type.
- *
- *    Revision 1.94  2007/02/08 19:44:49  fabiankeil
- *    Use a transparent background for the PNG replacement pattern.
- *
- *    Revision 1.93  2007/02/07 10:45:22  fabiankeil
- *    - Save the reason for generating http_responses.
- *    - Fix --disable-toggle (again).
- *    - Use TBL birthday hack for 403 responses as well.
- *    - Uglify the @menu@ again to fix JavaScript
- *      errors on the "blocked" template.
- *    - Escape an ampersand in cgi_error_unknown().
- *
- *    Revision 1.92  2007/01/28 13:41:17  fabiankeil
- *    - Add HEAD support to finish_http_response.
- *    - Add error favicon to internal HTML error messages.
- *
- *    Revision 1.91  2007/01/27 13:09:16  fabiankeil
- *    Add new config option "templdir" to
- *    change the templates directory.
- *
- *    Revision 1.90  2007/01/25 13:47:26  fabiankeil
- *    Added "forwarding-failed" template support for error_response().
- *
- *    Revision 1.89  2007/01/23 15:51:16  fabiankeil
- *    Add favicon delivery functions.
- *
- *    Revision 1.88  2007/01/23 13:14:32  fabiankeil
- *    - Map variables that aren't guaranteed to be
- *      pure ASCII html_encoded.
- *    - Use CGI_PREFIX to generate URL for user manual
- *      CGI page to make sure CGI_SITE_2_PATH is included.
- *
- *    Revision 1.87  2007/01/22 15:34:13  fabiankeil
- *    - "Protect" against a rather lame JavaScript-based
- *      Privoxy detection "attack" and check the referrer
- *      before delivering the CGI style sheet.
- *    - Move referrer check for unsafe CGI pages into
- *      referrer_is_safe() and log the result.
- *    - Map @url@ in cgi-error-disabled page.
- *      It's required for the "go there anyway" link.
- *    - Mark *csp as immutable for grep_cgi_referrer().
- *
- *    Revision 1.86  2007/01/09 11:54:26  fabiankeil
- *    Fix strdup() error handling in cgi_error_unknown()
- *    and cgi_error_no_template(). Reported by Markus Elfring.
- *
- *    Revision 1.85  2007/01/05 14:19:02  fabiankeil
- *    Handle pcrs_execute() errors in template_fill() properly.
- *
- *    Revision 1.84  2006/12/28 17:54:22  fabiankeil
- *    Fixed gcc43 conversion warnings and replaced sprintf
- *    calls with snprintf to give OpenBSD's gcc one less reason
- *    to complain.
- *
- *    Revision 1.83  2006/12/17 19:35:19  fabiankeil
- *    Escape ampersand in Privoxy menu.
- *
- *    Revision 1.82  2006/12/17 17:53:39  fabiankeil
- *    Suppress the toggle link if remote toggling is disabled.
- *
- *    Revision 1.81  2006/12/09 13:49:16  fabiankeil
- *    Fix configure option --disable-toggle.
- *    Thanks to Peter Thoenen for reporting this.
- *
- *    Revision 1.80  2006/12/08 14:45:32  fabiankeil
- *    Don't lose the FORCE_PREFIX in case of
- *    connection problems. Fixes #612235.
- *
- *    Revision 1.79  2006/11/13 19:05:50  fabiankeil
- *    Make pthread mutex locking more generic. Instead of
- *    checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- *    and use mutex locking unless there is an _r function
- *    available. Better safe than sorry.
- *
- *    Fixes "./configure --disable-pthread" and should result
- *    in less threading-related problems on pthread-using platforms,
- *    but it still doesn't fix BR#1122404.
- *
- *    Revision 1.78  2006/09/21 19:22:07  fabiankeil
- *    Use CGI_PREFIX to check the referrer.
- *    The check for "http://config.privoxy.org/"; fails
- *    if the user modified CGI_SITE_2_HOST.
- *
- *    Revision 1.77  2006/09/21 15:17:23  fabiankeil
- *    Adjusted headers for Privoxy's cgi responses:
- *    Don't set Last-Modified, Expires and Cache-Control
- *    headers for redirects; always set "Connection: close".
- *
- *    Revision 1.76  2006/09/07 14:06:38  fabiankeil
- *    Only predate the Last-Modified header for cgi responses
- *    that are delivered with status code 404 or 503.
- *
- *    Revision 1.75  2006/09/07 11:56:39  fabiankeil
- *    Mark cgi_send_user_manual as harmless,
- *    to fix the access denied problem Hal spotted.
- *    The manual has no secret content, therefore we
- *    don't have to care about "secure" referrers.
- *
- *    Revision 1.74  2006/09/06 18:45:03  fabiankeil
- *    Incorporate modified version of Roland Rosenfeld's patch to
- *    optionally access the user-manual via Privoxy. Closes patch 679075.
- *
- *    Formatting changed to Privoxy style, added call to
- *    cgi_error_no_template if the requested file doesn't
- *    exist and modified check whether or not Privoxy itself
- *    should serve the manual. Should work cross-platform now.
- *
- *    Revision 1.73  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.72  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.70.2.13  2004/02/17 13:30:23  oes
- *    Moved cgi_error_disabled() from cgiedit.c to
- *    cgi.c to re-enable build with --disable-editor.
- *    Fixes Bug #892744. Thanks to Matthew Fischer
- *    for spotting.
- *
- *    Revision 1.70.2.12  2003/12/17 16:33:16  oes
- *     - Added new function cgi_redirect to handle creation of
- *       HTTP redirect messages formerly repeated in the code.
- *     - Send cgi_error_disabled instead of cgi_error_404 when
- *       referrer check fails
- *     - Dynamic content now gets Expires header field with date
- *       in the past
- *
- *    Revision 1.70.2.11  2003/10/23 12:29:26  oes
- *    Bugfix: Transparent PNG was not transparent. Thanks to
- *    Dan Razzell of Starfish Systems for notice and new PNG.
- *
- *    Revision 1.70.2.10  2003/06/06 07:54:25  oes
- *    Security fix: dspatch_known_cgi no longer considers an empty
- *    referrer safe for critical CGIs, since malicious links could
- *    reside on https:// locations which browsers don't advertize as
- *    referrers. Closes bug #749916, thanks to Jeff Epler for the
- *    hint. Goodbye One-Click[tm] toggling :-(
- *
- *    Revision 1.70.2.9  2003/05/08 15:11:31  oes
- *    Nit
- *
- *    Revision 1.70.2.8  2003/04/29 13:33:51  oes
- *    Killed a compiler warning on OSX
- *
- *    Revision 1.70.2.7  2003/04/03 13:50:58  oes
- *    - Don't call cgi_error_disabled ifndef FEATURE_CGI_EDIT_ACTIONS
- *      (fixes bug #710056)
- *    - Show toggle info only if we have it
- *
- *    Revision 1.70.2.6  2003/03/12 01:26:25  david__schmidt
- *    Move declaration of struct tm dummy outside of a control block so it is
- *    accessible later on during snprintf in get_http_time.
- *
- *    Revision 1.70.2.5  2003/03/11 11:53:58  oes
- *    Cosmetic: Renamed cryptic variable
- *
- *    Revision 1.70.2.4  2003/03/07 03:41:03  david__schmidt
- *    Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX.  Hopefully this will take care of all of those pesky crash reports.
- *
- *    Revision 1.70.2.3  2002/11/28 18:14:32  oes
- *    Disable access to critical CGIs via untrusted referrers.
- *    This prevents users from being tricked by malicious websites
- *    into making unintentional configuration changes:
- *
- *     - Added flag to each cgi_dispatcher that allows or denies
- *       external linking
- *     - Introduced proviorical function that greps for the
- *       referrer header before regular header parsing happens
- *     - Added safety check to dispatch_known_cgi. CGI is called
- *       if (cgi harmless || no referrer || we are referrer).
- *       Else a) toggle calls are modified not to change status and
- *       b) all other calls are denied.
- *
- *    Revision 1.70.2.2  2002/11/12 16:20:37  oes
- *    Added missing #ifdef FEATURE_TOGGLE around g_bToggleIJB; fixes bug #636651
- *
- *    Revision 1.70.2.1  2002/08/05 11:17:46  oes
- *    Fixed Bug #587820, i.e. added workaround for IE bug that includes fragment identifier in (cgi) query
- *
- *    Revision 1.70  2002/05/19 11:33:20  jongfoster
- *    If a CGI error was not handled, and propogated back to
- *    dispatch_known_cgi(), then it was assumed to be "out of memory".
- *    This gave a very misleading error message.
- *
- *    Now other errors will cause a simple message giving the error
- *    number and asking the user to report a bug.
- *
- *    Bug report:
- *    http://sourceforge.net/tracker/index.php?func=detail
- *    &aid=557905&group_id=11118&atid=111118
- *
- *    Revision 1.69  2002/05/14 21:28:40  oes
- *     - Fixed add_help_link to link to the (now split) actions
- *       part of the config chapter
- *     - Renamed helplink export to actions-help-prefix
- *
- *    Revision 1.68  2002/05/12 21:36:29  jongfoster
- *    Correcting function comments
- *
- *    Revision 1.67  2002/04/30 12:02:07  oes
- *    Nit: updated a comment
- *
- *    Revision 1.66  2002/04/26 18:32:57  jongfoster
- *    Fixing a memory leak on error
- *
- *    Revision 1.65  2002/04/26 12:53:51  oes
- *     - New function add_help_link
- *     - default_exports now exports links to the user manual
- *       and a prefix for links into the config chapter
- *
- *    Revision 1.64  2002/04/24 02:17:21  oes
- *     - Better descriptions for CGIs
- *     - Hide edit-actions, more shortcuts
- *     - Moved get_char_param, get_string_param and get_number_param here
- *       from cgiedit.c
- *
- *    Revision 1.63  2002/04/15 19:06:43  jongfoster
- *    Typos
- *
- *    Revision 1.62  2002/04/10 19:59:46  jongfoster
- *    Fixes to #include in templates:
- *    - Didn't close main file if loading an included template fails.
- *    - I'm paranoid and want to disallow "#include /etc/passwd".
- *
- *    Revision 1.61  2002/04/10 13:37:48  oes
- *    Made templates modular: template_load now recursive with max depth 1
- *
- *    Revision 1.60  2002/04/08 20:50:25  swa
- *    fixed JB spelling
- *
- *    Revision 1.59  2002/04/05 15:51:51  oes
- *     - added send-stylesheet CGI
- *     - bugfix: error-pages now get correct request protocol
- *     - fixed
- *     - kludged CGI descriptions and menu not to break JS syntax
- *
- *    Revision 1.58  2002/03/29 03:33:13  david__schmidt
- *    Fix Mac OSX compiler warnings
- *
- *    Revision 1.57  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.56  2002/03/24 17:50:46  jongfoster
- *    Fixing compile error if actions file editor disabled
- *
- *    Revision 1.55  2002/03/24 16:55:06  oes
- *    Making GIF checkerboard transparent
- *
- *    Revision 1.54  2002/03/24 16:18:15  jongfoster
- *    Removing old logo
- *
- *    Revision 1.53  2002/03/24 16:06:00  oes
- *    Correct transparency for checkerboard PNG. Thanks, Magnus!
- *
- *    Revision 1.52  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.51  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.50  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.49  2002/03/13 00:27:04  jongfoster
- *    Killing warnings
- *
- *    Revision 1.48  2002/03/08 17:47:07  jongfoster
- *    Adding comments
- *
- *    Revision 1.47  2002/03/08 16:41:33  oes
- *    Added GIF images again
- *
- *    Revision 1.46  2002/03/07 03:48:38  oes
- *     - Changed built-in images from GIF to PNG
- *       (with regard to Unisys patent issue)
- *     - Added a 4x4 pattern PNG which is less intrusive
- *       than the logo but also clearly marks the deleted banners
- *
- *    Revision 1.45  2002/03/06 22:54:35  jongfoster
- *    Automated function-comment nitpicking.
- *
- *    Revision 1.44  2002/03/05 22:43:45  david__schmidt
- *    - Better error reporting on OS/2
- *    - Fix double-slash comment (oops)
- *
- *    Revision 1.43  2002/03/05 21:33:45  david__schmidt
- *    - Re-enable OS/2 building after new parms were added
- *    - Fix false out of memory report when resolving CGI templates when no IP
- *      address is available of failed attempt (a la no such domain)
- *
- *    Revision 1.42  2002/01/21 00:33:20  jongfoster
- *    Replacing strsav() with the safer string_append() or string_join().
- *    Adding map_block_keep() to save a few bytes in the edit-actions-list HTML.
- *    Adding missing html_encode() to error message generators.
- *    Adding edit-actions-section-swap and many "shortcuts" to the list of CGIs.
- *
- *    Revision 1.41  2002/01/17 20:56:22  jongfoster
- *    Replacing hard references to the URL of the config interface
- *    with #defines from project.h
- *
- *    Revision 1.40  2002/01/09 14:26:46  oes
- *    Added support for thread-safe gmtime_r call.
- *
- *    Revision 1.39  2001/11/16 00:48:13  jongfoster
- *    Fixing a compiler warning
- *
- *    Revision 1.38  2001/11/13 00:31:21  jongfoster
- *    - Adding new CGIs for use by non-JavaScript browsers:
- *        edit-actions-url-form
- *        edit-actions-add-url-form
- *        edit-actions-remove-url-form
- *    - Fixing make_menu()'s HTML generation - it now quotes the href parameter.
- *    - Fixing || bug.
- *
- *    Revision 1.37  2001/11/01 14:28:47  david__schmidt
- *    Show enablement/disablement status in almost all templates.
- *    There is a little trickiness here: apparent recursive resolution of
- *    @if-enabled-then@ caused the toggle template to show status out-of-phase with
- *    the actual enablement status.  So a similar construct,
- *    @if-enabled-display-then@, is used to resolve the status display on non-'toggle'
- *    templates.
- *
- *    Revision 1.36  2001/10/26 17:33:27  oes
- *    marginal bugfix
- *
- *    Revision 1.35  2001/10/23 21:48:19  jongfoster
- *    Cleaning up error handling in CGI functions - they now send back
- *    a HTML error page and should never cause a FATAL error.  (Fixes one
- *    potential source of "denial of service" attacks).
- *
- *    CGI actions file editor that works and is actually useful.
- *
- *    Ability to toggle Junkbuster remotely using a CGI call.
- *
- *    You can turn off both the above features in the main configuration
- *    file, e.g. if you are running a multi-user proxy.
- *
- *    Revision 1.34  2001/10/18 22:22:09  david__schmidt
- *    Only show "Local support" on templates conditionally:
- *      - if either 'admin-address' or 'proxy-info-url' are uncommented in config
- *      - if not, no Local support section appears
- *
- *    Revision 1.33  2001/10/14 22:28:41  jongfoster
- *    Fixing stupid typo.
- *
- *    Revision 1.32  2001/10/14 22:20:18  jongfoster
- *    - Changes to CGI dispatching method to match CGI names exactly,
- *      rather than doing a prefix match.
- *    - No longer need to count the length of the CGI handler names by hand.
- *    - Adding new handler for 404 error when disptching a CGI, if none of
- *      the handlers match.
- *    - Adding new handlers for CGI actionsfile editor.
- *
- *    Revision 1.31  2001/10/10 10:56:39  oes
- *    Failiure to load template now fatal. Before, the user got a hard-to-understand assertion failure from cgi.c
- *
- *    Revision 1.30  2001/10/02 15:30:57  oes
- *    Introduced show-request cgi
- *
- *    Revision 1.29  2001/09/20 15:47:44  steudten
- *
- *    Fix BUG: Modify int size to size_t size in fill_template()
- *     - removes big trouble on machines where sizeof(int) != sizeof(size_t).
- *
- *    Revision 1.28  2001/09/19 18:00:37  oes
- *     - Deletef time() FIXME (Can't fail under Linux either, if
- *       the argument is guaranteed to be in out address space,
- *       which it is.)
- *     - Fixed comments
- *     - Pointer notation cosmetics
- *     - Fixed a minor bug in template_fill(): Failiure of
- *       pcrs_execute() now secure.
- *
- *    Revision 1.27  2001/09/16 17:08:54  jongfoster
- *    Moving simple CGI functions from cgi.c to new file cgisimple.c
- *
- *    Revision 1.26  2001/09/16 15:47:37  jongfoster
- *    First version of CGI-based edit interface.  This is very much a
- *    work-in-progress, and you can't actually use it to edit anything
- *    yet.  You must #define FEATURE_CGI_EDIT_ACTIONS for these changes
- *    to have any effect.
- *
- *    Revision 1.25  2001/09/16 15:02:35  jongfoster
- *    Adding i.j.b/robots.txt.
- *    Inlining add_stats() since it's only ever called from one place.
- *
- *    Revision 1.24  2001/09/16 11:38:01  jongfoster
- *    Splitting fill_template() into 2 functions:
- *    template_load() loads the file
- *    template_fill() performs the PCRS regexps.
- *    This is because the CGI edit interface has a "table row"
- *    template which is used many times in the page - this
- *    change means it's only loaded from disk once.
- *
- *    Revision 1.23  2001/09/16 11:16:05  jongfoster
- *    Better error handling in dispatch_cgi() and parse_cgi_parameters()
- *
- *    Revision 1.22  2001/09/16 11:00:10  jongfoster
- *    New function alloc_http_response, for symmetry with free_http_response
- *
- *    Revision 1.21  2001/09/13 23:53:03  jongfoster
- *    Support for both static and dynamically generated CGI pages.
- *    Correctly setting Last-Modified: and Expires: HTTP headers.
- *
- *    Revision 1.20  2001/09/13 23:40:36  jongfoster
- *    (Cosmetic only) Indentation correction
- *
- *    Revision 1.19  2001/09/13 23:31:25  jongfoster
- *    Moving image data to cgi.c rather than cgi.h.
- *
- *    Revision 1.18  2001/08/05 16:06:20  jongfoster
- *    Modifiying "struct map" so that there are now separate header and
- *    "map_entry" structures.  This means that functions which modify a
- *    map no longer need to return a pointer to the modified map.
- *    Also, it no longer reverses the order of the entries (which may be
- *    important with some advanced template substitutions).
- *
- *    Revision 1.17  2001/08/05 15:57:38  oes
- *    Adapted finish_http_response to new list_to_text
- *
- *    Revision 1.16  2001/08/01 21:33:18  jongfoster
- *    Changes to fill_template() that reduce memory usage without having
- *    an impact on performance.  I also renamed some variables so as not
- *    to clash with the C++ keywords "new" and "template".
- *
- *    Revision 1.15  2001/08/01 21:19:22  jongfoster
- *    Moving file version information to a separate CGI page.
- *
- *    Revision 1.14  2001/08/01 00:19:03  jongfoster
- *    New function: map_conditional() for an if-then-else syntax.
- *    Changing to use new version of show_defines()
- *
- *    Revision 1.13  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.12  2001/07/29 18:47:05  jongfoster
- *    Adding missing #include "loadcfg.h"
- *
- *    Revision 1.11  2001/07/18 17:24:37  oes
- *    Changed to conform to new pcrs interface
- *
- *    Revision 1.10  2001/07/13 13:53:13  oes
- *    Removed all #ifdef PCRS and related code
- *
- *    Revision 1.9  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.8  2001/06/29 13:21:46  oes
- *    - Cosmetics: renamed and reordered functions, variables,
- *      texts, improved comments  etc
- *
- *    - Removed ij_untrusted_url() The relevant
- *      info is now part of the "untrusted" page,
- *      which is generated by filters.c:trust_url()
- *
- *    - Generators of content now call finish_http_response()
- *      themselves, making jcc.c:chat() a little less
- *      cluttered
- *
- *    - Removed obsolete "Pragma: no-cache" from our headers
- *
- *    - http_responses now know their head length
- *
- *    - fill_template now uses the new interface to pcrs, so that
- *       - long jobs (like whole files) no longer have to be assembled
- *         in a fixed size buffer
- *       - the new T (trivial) option is used, and the replacement may
- *         contain Perl syntax backrefs without confusing pcrs
- *
- *    - Introduced default_exports() which generates a set of exports
- *      common to all CGIs and other content generators
- *
- *    - Introduced convenience function map_block_killer()
- *
- *    - Introduced convenience function make_menu()
- *
- *    - Introduced CGI-like function error_response() which generates
- *      the "No such domain" and "Connect failed" messages using the
- *      CGI platform
- *
- *    - cgi_show_url_info:
- *      - adapted to new CGI features
- *      - form and answers now generated from same template
- *      - http:// prefix in URL now OK
- *
- *    - cgi_show_status:
- *      - adapted to new CGI features
- *      - no longer uses csp->init_proxy_args
- *
- *    - cgi_default:
- *      - moved menu generation to make_menu()
- *
- *    - add_stats now writes single export map entries instead
- *      of a fixed string
- *
- *    - Moved redirect_url() to filters.c
- *
- *    - Fixed mem leak in free_http_response(), map_block_killer(),
- *
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.7  2001/06/09 10:51:58  jongfoster
- *    Changing "show URL info" handler to new style.
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.6  2001/06/07 23:05:19  jongfoster
- *    Removing code related to old forward and ACL files.
- *
- *    Revision 1.5  2001/06/05 19:59:16  jongfoster
- *    Fixing multiline character string (a GCC-only "feature"), and snprintf (it's _snprintf under VC++).
- *
- *    Revision 1.4  2001/06/04 10:41:52  swa
- *    show version string of cgi.h and cgi.c
- *
- *    Revision 1.3  2001/06/03 19:12:16  oes
- *    introduced new cgi handling
- *
- *    No revisions before 1.3
- *
- **********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <string.h>
-#include <limits.h>
-#include <assert.h>
-
-#include "project.h"
-#include "cgi.h"
-#include "list.h"
-#include "encode.h"
-#include "ssplit.h"
-#include "errlog.h"
-#include "filters.h"
-#include "miscutil.h"
-#include "cgisimple.h"
-#include "jbsockets.h"
-#if defined(FEATURE_CGI_EDIT_ACTIONS) || defined(FEATURE_TOGGLE)
-#include "cgiedit.h"
-#endif /* defined(FEATURE_CGI_EDIT_ACTIONS) || defined (FEATURE_TOGGLE) */
-#include "loadcfg.h"
-/* loadcfg.h is for global_toggle_state only */
-#ifdef FEATURE_PTHREAD
-#include "jcc.h"
-/* jcc.h is for mutex semaphore globals only */
-#endif /* def FEATURE_PTHREAD */
-const char cgi_h_rcs[] = CGI_H_VERSION;
-
-/*
- * List of CGI functions: name, handler, description
- * Note: Do NOT use single quotes in the description;
- *       this will break the dynamic "blocked" template!
- */
-static const struct cgi_dispatcher cgi_dispatchers[] = {
-   { "",
-         cgi_default,
-         "Privoxy main page",
-         TRUE },
-#ifdef FEATURE_GRACEFUL_TERMINATION
-   { "die", 
-         cgi_die,  
-         "<b>Shut down</b> - <em class=\"warning\">Do not deploy this build in a production environment, "
-        "this is a one click Denial Of Service attack!!!</em>",
-         FALSE }, 
-#endif
-   { "show-status", 
-         cgi_show_status,  
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-        "View &amp; change the current configuration",
-#else
-        "View the current configuration",
-#endif
-         TRUE }, 
-   { "show-version", 
-         cgi_show_version,  
-         "View the source code version numbers",
-          TRUE }, 
-   { "show-request", 
-         cgi_show_request,  
-         "View the request headers",
-         TRUE }, 
-   { "show-url-info",
-         cgi_show_url_info, 
-         "Look up which actions apply to a URL and why",
-         TRUE },
-#ifdef FEATURE_TOGGLE
-   { "toggle",
-         cgi_toggle, 
-         "Toggle Privoxy on or off",
-         FALSE },
-#endif /* def FEATURE_TOGGLE */
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-   { "edit-actions", /* Edit the actions list */
-         cgi_edit_actions, 
-         NULL, FALSE },
-   { "eaa", /* Shortcut for edit-actions-add-url-form */
-         cgi_edit_actions_add_url_form, 
-         NULL, FALSE },
-   { "eau", /* Shortcut for edit-actions-url-form */
-         cgi_edit_actions_url_form, 
-         NULL, FALSE },
-   { "ear", /* Shortcut for edit-actions-remove-url-form */
-         cgi_edit_actions_remove_url_form, 
-         NULL, FALSE },
-   { "eal", /* Shortcut for edit-actions-list */
-         cgi_edit_actions_list, 
-         NULL, FALSE },
-   { "eafu", /* Shortcut for edit-actions-for-url */
-         cgi_edit_actions_for_url, 
-         NULL, FALSE },
-   { "eas", /* Shortcut for edit-actions-submit */
-         cgi_edit_actions_submit, 
-         NULL, FALSE },
-   { "easa", /* Shortcut for edit-actions-section-add */
-         cgi_edit_actions_section_add, 
-         NULL, FALSE  },
-   { "easr", /* Shortcut for edit-actions-section-remove */
-         cgi_edit_actions_section_remove, 
-         NULL, FALSE  },
-   { "eass", /* Shortcut for edit-actions-section-swap */
-         cgi_edit_actions_section_swap, 
-         NULL, FALSE  },
-   { "edit-actions-for-url",
-         cgi_edit_actions_for_url, 
-         NULL, FALSE  /* Edit the actions for (a) specified URL(s) */ },
-   { "edit-actions-list",
-         cgi_edit_actions_list, 
-         NULL, TRUE /* Edit the actions list */ },
-   { "edit-actions-submit",
-         cgi_edit_actions_submit, 
-         NULL, FALSE /* Change the actions for (a) specified URL(s) */ },
-   { "edit-actions-url",
-         cgi_edit_actions_url, 
-         NULL, FALSE /* Change a URL pattern in the actionsfile */ },
-   { "edit-actions-url-form",
-         cgi_edit_actions_url_form, 
-         NULL, FALSE /* Form to change a URL pattern in the actionsfile */ },
-   { "edit-actions-add-url",
-         cgi_edit_actions_add_url, 
-         NULL, FALSE /* Add a URL pattern to the actionsfile */ },
-   { "edit-actions-add-url-form",
-         cgi_edit_actions_add_url_form, 
-         NULL, FALSE /* Form to add a URL pattern to the actionsfile */ },
-   { "edit-actions-remove-url",
-         cgi_edit_actions_remove_url, 
-         NULL, FALSE /* Remove a URL pattern from the actionsfile */ },
-   { "edit-actions-remove-url-form",
-         cgi_edit_actions_remove_url_form, 
-         NULL, FALSE /* Form to remove a URL pattern from the actionsfile */ },
-   { "edit-actions-section-add",
-         cgi_edit_actions_section_add, 
-         NULL, FALSE /* Remove a section from the actionsfile */ },
-   { "edit-actions-section-remove",
-         cgi_edit_actions_section_remove, 
-         NULL, FALSE /* Remove a section from the actionsfile */ },
-   { "edit-actions-section-swap",
-         cgi_edit_actions_section_swap, 
-         NULL, FALSE /* Swap two sections in the actionsfile */ },
-#endif /* def FEATURE_CGI_EDIT_ACTIONS */
-   { "error-favicon.ico", 
-         cgi_send_error_favicon,  
-         NULL, TRUE /* Sends the favicon image for error pages. */ },
-   { "favicon.ico", 
-         cgi_send_default_favicon,  
-         NULL, TRUE /* Sends the default favicon image. */ },
-   { "robots.txt", 
-         cgi_robots_txt,  
-         NULL, TRUE /* Sends a robots.txt file to tell robots to go away. */ }, 
-   { "send-banner",
-         cgi_send_banner, 
-         NULL, TRUE /* Send a built-in image */ },
-   { "send-stylesheet",
-         cgi_send_stylesheet, 
-         NULL, FALSE /* Send templates/cgi-style.css */ },
-   { "t",
-         cgi_transparent_image, 
-         NULL, TRUE /* Send a transparent image (short name) */ },
-   { "url-info-osd.xml",
-         cgi_send_url_info_osd, 
-         NULL, TRUE /* Send templates/url-info-osd.xml */ },
-   { "user-manual",
-          cgi_send_user_manual,
-          NULL, TRUE /* Send user-manual */ },
-   { NULL, /* NULL Indicates end of list and default page */
-         cgi_error_404,
-         NULL, TRUE /* Unknown CGI page */ }
-};
-
-
-/*
- * Built-in images for ad replacement
- *
- * Hint: You can encode your own images like this:
- * cat your-image | perl -e 'while (read STDIN, $c, 1) { printf("\\%.3o", unpack("C", $c)); }'
- */
-
-#ifdef FEATURE_NO_GIFS
-
-/*
- * Checkerboard pattern, as a PNG.
- */
-const char image_pattern_data[] =
-   "\211\120\116\107\015\012\032\012\000\000\000\015\111\110\104"
-   "\122\000\000\000\004\000\000\000\004\010\006\000\000\000\251"
-   "\361\236\176\000\000\000\006\142\113\107\104\000\000\000\000"
-   "\000\000\371\103\273\177\000\000\000\033\111\104\101\124\010"
-   "\327\143\140\140\140\060\377\377\377\077\003\234\106\341\060"
-   "\060\230\063\020\124\001\000\161\021\031\241\034\364\030\143"
-   "\000\000\000\000\111\105\116\104\256\102\140\202";
-
-/*
- * 1x1 transparant PNG.
- */
-const char image_blank_data[] =
- "\211\120\116\107\015\012\032\012\000\000\000\015\111\110\104\122"
- "\000\000\000\001\000\000\000\001\001\003\000\000\000\045\333\126"
- "\312\000\000\000\003\120\114\124\105\377\377\377\247\304\033\310"
- "\000\000\000\001\164\122\116\123\000\100\346\330\146\000\000\000"
- "\001\142\113\107\104\000\210\005\035\110\000\000\000\012\111\104"
- "\101\124\170\001\143\140\000\000\000\002\000\001\163\165\001\030"
- "\000\000\000\000\111\105\116\104\256\102\140\202";
-#else
-
-/*
- * Checkerboard pattern, as a GIF.
- */
-const char image_pattern_data[] =
-   "\107\111\106\070\071\141\004\000\004\000\200\000\000\310\310"
-   "\310\377\377\377\041\376\016\111\040\167\141\163\040\141\040"
-   "\142\141\156\156\145\162\000\041\371\004\001\012\000\001\000"
-   "\054\000\000\000\000\004\000\004\000\000\002\005\104\174\147"
-   "\270\005\000\073";
-
-/*
- * 1x1 transparant GIF.
- */
-const char image_blank_data[] =
-   "GIF89a\001\000\001\000\200\000\000\377\377\377\000\000"
-   "\000!\371\004\001\000\000\000\000,\000\000\000\000\001"
-   "\000\001\000\000\002\002D\001\000;";
-#endif
-
-const size_t image_pattern_length = sizeof(image_pattern_data) - 1;
-const size_t image_blank_length   = sizeof(image_blank_data) - 1;
-
-
-static struct http_response cgi_error_memory_response[1];
-
-static struct http_response *dispatch_known_cgi(struct client_state * csp,
-                                                const char * path);
-static struct map *parse_cgi_parameters(char *argstring);
-
-
-/*********************************************************************
- * 
- * Function    :  dispatch_cgi
- *
- * Description :  Checks if a request URL has either the magical
- *                hostname CGI_SITE_1_HOST (usually http://p.p/) or
- *                matches CGI_SITE_2_HOST CGI_SITE_2_PATH (usually
- *                http://config.privoxy.org/). If so, it passes
- *                the (rest of the) path onto dispatch_known_cgi, which
- *                calls the relevant CGI handler function.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  http_response if match, NULL if nonmatch or handler fail
- *
- *********************************************************************/
-struct http_response *dispatch_cgi(struct client_state *csp)
-{
-   const char *host = csp->http->host;
-   const char *path = csp->http->path;
-
-   /*
-    * Should we intercept ?
-    */
-
-   /* Note: "example.com" and "example.com." are equivalent hostnames. */
-
-   /* Either the host matches CGI_SITE_1_HOST ..*/
-   if (   ( (0 == strcmpic(host, CGI_SITE_1_HOST))
-         || (0 == strcmpic(host, CGI_SITE_1_HOST ".")))
-       && (path[0] == '/') )
-   {
-      /* ..then the path will all be for us.  Remove leading '/' */
-      path++;
-   }
-   /* Or it's the host part CGI_SITE_2_HOST, and the path CGI_SITE_2_PATH */
-   else if ( ( (0 == strcmpic(host, CGI_SITE_2_HOST ))
-            || (0 == strcmpic(host, CGI_SITE_2_HOST ".")) )
-          && (0 == strncmpic(path, CGI_SITE_2_PATH, strlen(CGI_SITE_2_PATH))) )
-   {
-      /* take everything following CGI_SITE_2_PATH */
-      path += strlen(CGI_SITE_2_PATH);
-      if (*path == '/')
-      {
-         /* skip the forward slash after CGI_SITE_2_PATH */
-         path++;
-      }
-      else if (*path != '\0')
-      {
-         /*
-          * weirdness: URL is /configXXX, where XXX is some string
-          * Do *NOT* intercept.
-          */
-         return NULL;
-      }
-   }
-   else
-   {
-      /* Not a CGI */
-      return NULL;
-   }
-
-   /* 
-    * This is a CGI call.
-    */
-
-   return dispatch_known_cgi(csp, path);
-}
-
-
-/*********************************************************************
- *
- * Function    :  grep_cgi_referrer
- *
- * Description :  Ugly provisorical fix that greps the value of the
- *                referer HTTP header field out of a linked list of
- *                strings like found at csp->headers. Will disappear
- *                in Privoxy 3.1.
- *
- *                FIXME: csp->headers ought to be csp->http->headers
- *                FIXME: Parsing all client header lines should
- *                       happen right after the request is received!
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  pointer to value (no copy!), or NULL if none found.
- *
- *********************************************************************/
-static char *grep_cgi_referrer(const struct client_state *csp)
-{
-   struct list_entry *p;
-
-   for (p = csp->headers->first; p != NULL; p = p->next)
-   {
-      if (p->str == NULL) continue;
-      if (strncmpic(p->str, "Referer: ", 9) == 0)
-      {
-         return ((p->str) + 9);
-      }
-   }
-   return NULL;
-
-}
-
-
-/*********************************************************************
- * 
- * Function    :  referrer_is_safe
- *
- * Description :  Decides whether we trust the Referer for
- *                CGI pages which are only meant to be reachable
- *                through Privoxy's web interface directly.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  TRUE  if the referrer is safe, or
- *                FALSE if the referrer is unsafe or not set.
- *
- *********************************************************************/
-static int referrer_is_safe(const struct client_state *csp)
-{
-   char *referrer;
-   static const char alternative_prefix[] = "http://"; CGI_SITE_1_HOST "/";
-
-   referrer = grep_cgi_referrer(csp);
-
-   if (NULL == referrer)
-   {
-      /* No referrer, no access  */
-      log_error(LOG_LEVEL_ERROR, "Denying access to %s. No referrer found.",
-         csp->http->url);
-   }
-   else if ((0 == strncmp(referrer, CGI_PREFIX, sizeof(CGI_PREFIX)-1)
-         || (0 == strncmp(referrer, alternative_prefix, strlen(alternative_prefix)))))
-   {
-      /* Trustworthy referrer */
-      log_error(LOG_LEVEL_CGI, "Granting access to %s, referrer %s is trustworthy.",
-         csp->http->url, referrer);
-
-      return TRUE;
-   }
-   else
-   {
-      /* Untrustworthy referrer */
-      log_error(LOG_LEVEL_ERROR, "Denying access to %s, referrer %s isn't trustworthy.",
-         csp->http->url, referrer);
-   }
-
-   return FALSE;
-
-}
-
-/*********************************************************************
- * 
- * Function    :  dispatch_known_cgi
- *
- * Description :  Processes a CGI once dispatch_cgi has determined that
- *                it matches one of the magic prefixes. Parses the path
- *                as a cgi name plus query string, prepares a map that
- *                maps CGI parameter names to their values, initializes
- *                the http_response struct, and calls the relevant CGI
- *                handler function.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  path = Path of CGI, with the CGI prefix removed.
- *                       Should not have a leading "/".
- *
- * Returns     :  http_response, or NULL on handler failure or out of
- *                memory.
- *
- *********************************************************************/
-static struct http_response *dispatch_known_cgi(struct client_state * csp,
-                                                const char * path)
-{
-   const struct cgi_dispatcher *d;
-   struct map *param_list;
-   struct http_response *rsp;
-   char *query_args_start;
-   char *path_copy;
-   jb_err err;
-
-   if (NULL == (path_copy = strdup(path)))
-   {
-      return cgi_error_memory();
-   }
-   query_args_start = path_copy;
-   while (*query_args_start && *query_args_start != '?' && *query_args_start != '/')
-   {
-      query_args_start++;
-   }
-   if (*query_args_start == '/') 
-   {
-      *query_args_start++ = '\0';
-      if ((param_list = new_map()))
-      {
-         map(param_list, "file", 1, url_decode(query_args_start), 0);
-      }
-   }
-   else
-   {
-      if (*query_args_start == '?')
-      {
-         *query_args_start++ = '\0';
-      }
-      if (NULL == (param_list = parse_cgi_parameters(query_args_start)))
-      {
-         free(path_copy);
-         return cgi_error_memory();
-      }
-   }
-
-   /*
-    * At this point:
-    * path_copy        = CGI call name
-    * param_list       = CGI params, as map
-    */
-
-   /* Get mem for response or fail*/
-   if (NULL == (rsp = alloc_http_response()))
-   {
-      free(path_copy);
-      free_map(param_list);
-      return cgi_error_memory();
-   }
-
-   /* 
-    * Find and start the right CGI function
-    */
-   d = cgi_dispatchers;
-   for (;;)
-   {
-      if ((d->name == NULL) || (strcmp(path_copy, d->name) == 0))
-      {
-         /*
-          * If the called CGI is either harmless, or referred
-          * from a trusted source, start it.
-          */
-         if (d->harmless || referrer_is_safe(csp))
-         {
-            err = (d->handler)(csp, rsp, param_list);
-         }
-         else
-         {
-            /*
-             * Else, modify toggle calls so that they only display
-             * the status, and deny all other calls.
-             */
-            if (0 == strcmp(path_copy, "toggle"))
-            {
-               unmap(param_list, "set");
-               err = (d->handler)(csp, rsp, param_list);
-            }
-            else
-            {
-               err = cgi_error_disabled(csp, rsp);
-            }
-         }
-
-         free(path_copy);
-         free_map(param_list);
-
-         if (err == JB_ERR_CGI_PARAMS)
-         {
-            err = cgi_error_bad_param(csp, rsp);
-         }
-         if (err && (err != JB_ERR_MEMORY))
-         {
-            /* Unexpected error! Shouldn't get here */
-            log_error(LOG_LEVEL_ERROR, "Unexpected CGI error %d in top-level handler.  Please file a bug report!", err);
-            err = cgi_error_unknown(csp, rsp, err);
-         }
-         if (!err)
-         {
-            /* It worked */
-            rsp->reason = RSP_REASON_CGI_CALL;
-            return finish_http_response(csp, rsp);
-         }
-         else
-         {
-            /* Error in handler, probably out-of-memory */
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-      }
-      d++;
-   }
-}
-   
-        
-/*********************************************************************
- *
- * Function    :  parse_cgi_parameters
- *
- * Description :  Parse a URL-encoded argument string into name/value
- *                pairs and store them in a struct map list.
- *
- * Parameters  :
- *          1  :  argstring = string to be parsed.  Will be trashed.
- *
- * Returns     :  pointer to param list, or NULL if out of memory.
- *
- *********************************************************************/
-static struct map *parse_cgi_parameters(char *argstring)
-{
-   char *p;
-   char *vector[BUFFER_SIZE];
-   int pairs, i;
-   struct map *cgi_params;
-
-   if (NULL == (cgi_params = new_map()))
-   {
-      return NULL;
-   }
-
-   /* 
-    * IE 5 does, of course, violate RFC 2316 Sect 4.1 and sends
-    * the fragment identifier along with the request, so we must
-    * cut it off here, so it won't pollute the CGI params:
-    */
-   if (NULL != (p = strchr(argstring, '#')))
-   {
-      *p = '\0';
-   }
-
-   pairs = ssplit(argstring, "&", vector, SZ(vector), 1, 1);
-
-   for (i = 0; i < pairs; i++)
-   {
-      if ((NULL != (p = strchr(vector[i], '='))) && (*(p+1) != '\0'))
-      {
-         *p = '\0';
-         if (map(cgi_params, url_decode(vector[i]), 0, url_decode(++p), 0))
-         {
-            free_map(cgi_params);
-            return NULL;
-         }
-      }
-   }
-
-   return cgi_params;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_char_param
- *
- * Description :  Get a single-character parameter passed to a CGI
- *                function.
- *
- * Parameters  :
- *          1  :  parameters = map of cgi parameters
- *          2  :  param_name = The name of the parameter to read
- *
- * Returns     :  Uppercase character on success, '\0' on error.
- *
- *********************************************************************/
-char get_char_param(const struct map *parameters,
-                    const char *param_name)
-{
-   char ch;
-
-   assert(parameters);
-   assert(param_name);
-
-   ch = *(lookup(parameters, param_name));
-   if ((ch >= 'a') && (ch <= 'z'))
-   {
-      ch = (char)(ch - 'a' + 'A');
-   }
-
-   return ch;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_string_param
- *
- * Description :  Get a string paramater, to be used as an
- *                ACTION_STRING or ACTION_MULTI paramater.
- *                Validates the input to prevent stupid/malicious
- *                users from corrupting their action file.
- *
- * Parameters  :
- *          1  :  parameters = map of cgi parameters
- *          2  :  param_name = The name of the parameter to read
- *          3  :  pparam = destination for paramater.  Allocated as
- *                part of the map "parameters", so don't free it.
- *                Set to NULL if not specified.
- *
- * Returns     :  JB_ERR_OK         on success, or if the paramater
- *                                  was not specified.
- *                JB_ERR_MEMORY     on out-of-memory.
- *                JB_ERR_CGI_PARAMS if the paramater is not valid.
- *
- *********************************************************************/
-jb_err get_string_param(const struct map *parameters,
-                        const char *param_name,
-                        const char **pparam)
-{
-   const char *param;
-   const char *s;
-   char ch;
-
-   assert(parameters);
-   assert(param_name);
-   assert(pparam);
-
-   *pparam = NULL;
-
-   param = lookup(parameters, param_name);
-   if (!*param)
-   {
-      return JB_ERR_OK;
-   }
-
-   if (strlen(param) >= CGI_PARAM_LEN_MAX)
-   {
-      /*
-       * Too long.
-       *
-       * Note that the length limit is arbitrary, it just seems
-       * sensible to limit it to *something*.  There's no
-       * technical reason for any limit at all.
-       */
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* Check every character to see if it's legal */
-   s = param;
-   while ((ch = *s++) != '\0')
-   {
-      if ( ((unsigned char)ch < (unsigned char)' ')
-        || (ch == '}') )
-      {
-         /* Probable hack attempt, or user accidentally used '}'. */
-         return JB_ERR_CGI_PARAMS;
-      }
-   }
-
-   /* Success */
-   *pparam = param;
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_number_param
- *
- * Description :  Get a non-negative integer from the parameters
- *                passed to a CGI function.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  parameters = map of cgi parameters
- *          3  :  name = Name of CGI parameter to read
- *          4  :  pvalue = destination for value.
- *                         Set to -1 on error.
- *
- * Returns     :  JB_ERR_OK         on success
- *                JB_ERR_MEMORY     on out-of-memory
- *                JB_ERR_CGI_PARAMS if the parameter was not specified
- *                                  or is not valid.
- *
- *********************************************************************/
-jb_err get_number_param(struct client_state *csp,
-                        const struct map *parameters,
-                        char *name,
-                        unsigned *pvalue)
-{
-   const char *param;
-   char ch;
-   unsigned value;
-
-   assert(csp);
-   assert(parameters);
-   assert(name);
-   assert(pvalue);
-
-   *pvalue = 0; 
-
-   param = lookup(parameters, name);
-   if (!*param)
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* We don't use atoi because I want to check this carefully... */
-
-   value = 0;
-   while ((ch = *param++) != '\0')
-   {
-      if ((ch < '0') || (ch > '9'))
-      {
-         return JB_ERR_CGI_PARAMS;
-      }
-
-      ch = (char)(ch - '0');
-
-      /* Note:
-       *
-       * <limits.h> defines UINT_MAX
-       *
-       * (UINT_MAX - ch) / 10 is the largest number that
-       *     can be safely multiplied by 10 then have ch added.
-       */
-      if (value > ((UINT_MAX - (unsigned)ch) / 10U))
-      {
-         return JB_ERR_CGI_PARAMS;
-      }
-
-      value = value * 10 + (unsigned)ch;
-   }
-
-   /* Success */
-   *pvalue = value;
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  error_response
- *
- * Description :  returns an http_response that explains the reason
- *                why a request failed.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  templatename = Which template should be used for the answer
- *          3  :  sys_err = system error number
- *
- * Returns     :  A http_response.  If we run out of memory, this
- *                will be cgi_error_memory().
- *
- *********************************************************************/
-struct http_response *error_response(struct client_state *csp,
-                                     const char *templatename,
-                                     int sys_err)
-{
-   jb_err err;
-   struct http_response *rsp;
-   struct map *exports = default_exports(csp, NULL);
-   char *path = NULL;
-
-   if (exports == NULL)
-   {
-      return cgi_error_memory();
-   }
-
-   if (NULL == (rsp = alloc_http_response()))
-   {
-      free_map(exports);
-      return cgi_error_memory();
-   }
-
-#ifdef FEATURE_FORCE_LOAD
-   if (csp->flags & CSP_FLAG_FORCED)
-   {
-      path = strdup(FORCE_PREFIX);
-   }
-   else
-#endif /* def FEATURE_FORCE_LOAD */
-   {
-      path = strdup("");
-   }
-   err = string_append(&path, csp->http->path);
-
-   if (!err) err = map(exports, "host", 1, html_encode(csp->http->host), 0);
-   if (!err) err = map(exports, "hostport", 1, html_encode(csp->http->hostport), 0);
-   if (!err) err = map(exports, "path", 1, html_encode_and_free_original(path), 0);
-   if (!err) err = map(exports, "error", 1, html_encode_and_free_original(safe_strerror(sys_err)), 0);
-   if (!err) err = map(exports, "protocol", 1, csp->http->ssl ? "https://"; : "http://";, 1); 
-   if (!err)
-   {
-     err = map(exports, "host-ip", 1, html_encode(csp->http->host_ip_addr_str), 0);
-     if (err)
-     {
-       /* Some failures, like "404 no such domain", don't have an IP address. */
-       err = map(exports, "host-ip", 1, html_encode(csp->http->host), 0);
-     }
-   }
-
-
-   if (err)
-   {
-      free_map(exports);
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   if (!strcmp(templatename, "no-such-domain"))
-   {
-      rsp->status = strdup("404 No such domain");
-      if (rsp->status == NULL)
-      {
-         free_map(exports);
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-      rsp->reason = RSP_REASON_NO_SUCH_DOMAIN;
-   }
-   else if (!strcmp(templatename, "forwarding-failed"))
-   {
-      const struct forward_spec *fwd = forward_url(csp, csp->http);
-      char *socks_type = NULL;
-      if (fwd == NULL)
-      {
-         log_error(LOG_LEVEL_FATAL, "gateway spec is NULL. This shouldn't happen!");
-         /* Never get here - LOG_LEVEL_FATAL causes program exit */
-      }
-
-      /*
-       * XXX: While the template is called forwarding-failed,
-       * it currently only handles socks forwarding failures.
-       */
-      assert(fwd != NULL);
-      assert(fwd->type != SOCKS_NONE);
-
-      /*
-       * Map failure reason, forwarding type and forwarder.
-       */
-      if (NULL == csp->error_message)
-      {
-         /*
-          * Either we forgot to record the failure reason,
-          * or the memory allocation failed.
-          */
-         log_error(LOG_LEVEL_ERROR, "Socks failure reason missing.");
-         csp->error_message = strdup("Failure reason missing. Check the log file for details.");
-      }
-      if (!err) err = map(exports, "gateway", 1, fwd->gateway_host, 1);
-
-      /*
-       * XXX: this is almost the same code as in cgi_show_url_info()
-       * and thus should be factored out and shared.
-       */
-      switch (fwd->type)
-      {
-         case SOCKS_4:
-            socks_type = "socks4-";
-            break;
-         case SOCKS_4A:
-            socks_type = "socks4a-";
-            break;
-         case SOCKS_5:
-            socks_type = "socks5-";
-            break;
-         default:
-            log_error(LOG_LEVEL_FATAL, "Unknown socks type: %d.", fwd->type);
-      }
-
-      if (!err) err = map(exports, "forwarding-type", 1, socks_type, 1);
-      if (!err) err = map(exports, "error-message", 1, html_encode(csp->error_message), 0);
-
-      if (!err) rsp->status = strdup("503 Forwarding failure");
-      if ((rsp->status == NULL) || (NULL == csp->error_message) || err)
-      {
-         free_map(exports);
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-      rsp->reason = RSP_REASON_FORWARDING_FAILED;
-   }
-   else if (!strcmp(templatename, "connect-failed"))
-   {
-      rsp->status = strdup("503 Connect failed");
-      if (rsp->status == NULL)
-      {
-         free_map(exports);
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-      rsp->reason = RSP_REASON_CONNECT_FAILED;
-   }
-
-   err = template_fill_for_cgi(csp, templatename, exports, rsp);
-   if (err)
-   {
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   return finish_http_response(csp, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_disabled
- *
- * Description :  CGI function that is called to generate an error
- *                response if the actions editor or toggle CGI are
- *                accessed despite having being disabled at compile-
- *                or run-time, or if the user followed an untrusted link
- *                to access a unsafe CGI feature that is only reachable
- *                through Privoxy directly.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err cgi_error_disabled(const struct client_state *csp,
-                          struct http_response *rsp)
-{
-   struct map *exports;
-
-   assert(csp);
-   assert(rsp);
-
-   if (NULL == (exports = default_exports(csp, "cgi-error-disabled")))
-   {
-      return JB_ERR_MEMORY;
-   }
-   if (map(exports, "url", 1, html_encode(csp->http->url), 0))
-   {
-      /* Not important enough to do anything */
-      log_error(LOG_LEVEL_ERROR, "Failed to fill in url.");
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-disabled", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_init_error_messages
- *
- * Description :  Call at the start of the program to initialize
- *                the error message used by cgi_error_memory().
- *
- * Parameters  :  N/A
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void cgi_init_error_messages(void)
-{
-   memset(cgi_error_memory_response, '\0', sizeof(*cgi_error_memory_response));
-   cgi_error_memory_response->head =
-      "HTTP/1.0 500 Internal Privoxy Error\r\n"
-      "Content-Type: text/html\r\n"
-      "\r\n";
-   cgi_error_memory_response->body =
-      "<html>\r\n"
-      "<head>\r\n"
-      " <title>500 Internal Privoxy Error</title>\r\n"
-      " <link rel=\"shortcut icon\" href=\"" CGI_PREFIX "error-favicon.ico\" type=\"image/x-icon\">"
-      "</head>\r\n"
-      "<body>\r\n"
-      "<h1>500 Internal Privoxy Error</h1>\r\n"
-      "<p>Privoxy <b>ran out of memory</b> while processing your request.</p>\r\n"
-      "<p>Please contact your proxy administrator, or try again later</p>\r\n"
-      "</body>\r\n"
-      "</html>\r\n";
-
-   cgi_error_memory_response->head_length =
-      strlen(cgi_error_memory_response->head);
-   cgi_error_memory_response->content_length =
-      strlen(cgi_error_memory_response->body);
-   cgi_error_memory_response->reason = RSP_REASON_OUT_OF_MEMORY;
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_memory
- *
- * Description :  Called if a CGI function runs out of memory.
- *                Returns a statically-allocated error response.
- *
- * Parameters  :  N/A
- *
- * Returns     :  http_response data structure for output.  This is
- *                statically allocated, for obvious reasons.
- *
- *********************************************************************/
-struct http_response *cgi_error_memory(void)
-{
-   /* assert that it's been initialized. */
-   assert(cgi_error_memory_response->head);
-
-   return cgi_error_memory_response;
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_no_template
- *
- * Description :  Almost-CGI function that is called if a template
- *                cannot be loaded.  Note this is not a true CGI,
- *                it takes a template name rather than a map of 
- *                parameters.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  template_name = Name of template that could not
- *                                be loaded.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_error_no_template(const struct client_state *csp,
-                             struct http_response *rsp,
-                             const char *template_name)
-{
-   static const char status[] =
-      "500 Internal Privoxy Error";
-   static const char body_prefix[] =
-      "<html>\r\n"
-      "<head>\r\n"
-      " <title>500 Internal Privoxy Error</title>\r\n"
-      " <link rel=\"shortcut icon\" href=\"" CGI_PREFIX "error-favicon.ico\" type=\"image/x-icon\">"
-      "</head>\r\n"
-      "<body>\r\n"
-      "<h1>500 Internal Privoxy Error</h1>\r\n"
-      "<p>Privoxy encountered an error while processing your request:</p>\r\n"
-      "<p><b>Could not load template file <code>";
-   static const char body_suffix[] =
-      "</code> or one of its included components.</b></p>\r\n"
-      "<p>Please contact your proxy administrator.</p>\r\n"
-      "<p>If you are the proxy administrator, please put the required file(s)"
-      "in the <code><i>(confdir)</i>/templates</code> directory.  The "
-      "location of the <code><i>(confdir)</i></code> directory "
-      "is specified in the main Privoxy <code>config</code> "
-      "file.  (It's typically the Privoxy install directory"
-#ifndef _WIN32
-      ", or <code>/etc/privoxy/</code>"
-#endif /* ndef _WIN32 */
-      ").</p>\r\n"
-      "</body>\r\n"
-      "</html>\r\n";
-   const size_t body_size = strlen(body_prefix) + strlen(template_name) + strlen(body_suffix) + 1;
-
-   assert(csp);
-   assert(rsp);
-   assert(template_name);
-
-   /* Reset rsp, if needed */
-   freez(rsp->status);
-   freez(rsp->head);
-   freez(rsp->body);
-   rsp->content_length = 0;
-   rsp->head_length = 0;
-   rsp->is_static = 0;
-
-   rsp->body = malloc(body_size);
-   if (rsp->body == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-   strlcpy(rsp->body, body_prefix, body_size);
-   strlcat(rsp->body, template_name, body_size);
-   strlcat(rsp->body, body_suffix, body_size);
-
-   rsp->status = strdup(status);
-   if (rsp->status == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_unknown
- *
- * Description :  Almost-CGI function that is called if an unexpected
- *                error occurs in the top-level CGI dispatcher.
- *                In this context, "unexpected" means "anything other
- *                than JB_ERR_MEMORY or JB_ERR_CGI_PARAMS" - CGIs are
- *                expected to handle all other errors internally,
- *                since they can give more relavent error messages
- *                that way.
- *
- *                Note this is not a true CGI, it takes an error
- *                code rather than a map of parameters.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  error_to_report = Error code to report.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_error_unknown(const struct client_state *csp,
-                         struct http_response *rsp,
-                         jb_err error_to_report)
-{
-   static const char status[] =
-      "500 Internal Privoxy Error";
-   static const char body_prefix[] =
-      "<html>\r\n"
-      "<head>\r\n"
-      " <title>500 Internal Privoxy Error</title>\r\n"
-      " <link rel=\"shortcut icon\" href=\"" CGI_PREFIX "error-favicon.ico\" type=\"image/x-icon\">"
-      "</head>\r\n"
-      "<body>\r\n"
-      "<h1>500 Internal Privoxy Error</h1>\r\n"
-      "<p>Privoxy encountered an error while processing your request:</p>\r\n"
-      "<p><b>Unexpected internal error: ";
-   static const char body_suffix[] =
-      "</b></p>\r\n"
-      "<p>Please "
-      "<a href=\"http://sourceforge.net/tracker/?group_id=11118&amp;atid=111118\";>"
-      "file a bug report</a>.</p>\r\n"
-      "</body>\r\n"
-      "</html>\r\n";
-   char errnumbuf[30];
-   /*
-    * Due to sizeof(errnumbuf), body_size will be slightly
-    * bigger than necessary but it doesn't really matter.
-    */
-   const size_t body_size = strlen(body_prefix) + sizeof(errnumbuf) + strlen(body_suffix) + 1;
-   assert(csp);
-   assert(rsp);
-
-   /* Reset rsp, if needed */
-   freez(rsp->status);
-   freez(rsp->head);
-   freez(rsp->body);
-   rsp->content_length = 0;
-   rsp->head_length = 0;
-   rsp->is_static = 0;
-   rsp->reason = RSP_REASON_INTERNAL_ERROR;
-
-   snprintf(errnumbuf, sizeof(errnumbuf), "%d", error_to_report);
-
-   rsp->body = malloc(body_size);
-   if (rsp->body == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-   strlcpy(rsp->body, body_prefix, body_size);
-   strlcat(rsp->body, errnumbuf,   body_size);
-   strlcat(rsp->body, body_suffix, body_size);
-
-   rsp->status = strdup(status);
-   if (rsp->status == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_bad_param
- *
- * Description :  CGI function that is called if the parameters
- *                (query string) for a CGI were wrong.
- *               
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_error_bad_param(const struct client_state *csp,
-                           struct http_response *rsp)
-{
-   struct map *exports;
-
-   assert(csp);
-   assert(rsp);
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-bad-param", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_redirect 
- *
- * Description :  CGI support function to generate a HTTP redirect
- *                message
- *
- * Parameters  :
- *          1  :  rsp = http_response data structure for output
- *          2  :  target = string with the target URL
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_redirect (struct http_response * rsp, const char *target)
-{
-   jb_err err;
-
-   assert(rsp);
-   assert(target);
-
-   err = enlist_unique_header(rsp->headers, "Location", target);
-
-   rsp->status = strdup("302 Local Redirect from Privoxy");
-   if (rsp->status == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  add_help_link
- *
- * Description :  Produce a copy of the string given as item,
- *                embedded in an HTML link to its corresponding
- *                section (item name in uppercase) in the actions
- *                chapter of the user manual, (whose URL is given in
- *                the config and defaults to our web site).
- *
- *                FIXME: I currently only work for actions, and would
- *                       like to be generalized for other topics.
- *
- * Parameters  :  
- *          1  :  item = item (will NOT be free()d.) 
- *                       It is assumed to be HTML-safe.
- *          2  :  config = The current configuration.
- *
- * Returns     :  String with item embedded in link, or NULL on
- *                out-of-memory
- *
- *********************************************************************/
-char *add_help_link(const char *item,
-                    struct configuration_spec *config)
-{
-   char *result;
-
-   if (!item) return NULL;
-
-   result = strdup("<a href=\"");
-   if (!strncmpic(config->usermanual, "file://", 7) ||
-       !strncmpic(config->usermanual, "http", 4))
-   {
-      string_append(&result, config->usermanual);
-   }
-   else
-   {
-      string_append(&result, "http://";);
-      string_append(&result, CGI_SITE_2_HOST);
-      string_append(&result, "/user-manual/");
-   }
-   string_append(&result, ACTIONS_HELP_PREFIX);
-   string_join  (&result, string_toupper(item));
-   string_append(&result, "\">");
-   string_append(&result, item);
-   string_append(&result, "</a> ");
-
-   return result;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_http_time
- *
- * Description :  Get the time in a format suitable for use in a
- *                HTTP header - e.g.:
- *                "Sun, 06 Nov 1994 08:49:37 GMT"
- *
- * Parameters  :  
- *          1  :  time_offset = Time returned will be current time
- *                              plus this number of seconds.
- *          2  :  buf = Destination for result.
- *          3  :  buffer_size = Size of the buffer above. Must be big
- *                              enough to hold 29 characters plus a
- *                              trailing zero.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void get_http_time(int time_offset, char *buf, size_t buffer_size)
-{
-   static const char day_names[7][4] =
-      { "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" };
-   static const char month_names[12][4] =
-      { "Jan", "Feb", "Mar", "Apr", "May", "Jun",
-        "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" };
-
-   struct tm *t;
-   time_t current_time;
-#if defined(HAVE_GMTIME_R)
-   struct tm dummy;
-#endif
-
-   assert(buf);
-   assert(buffer_size > (size_t)29);
-
-   time(&current_time);
-
-   current_time += time_offset;
-
-   /* get and save the gmt */
-#if HAVE_GMTIME_R
-   t = gmtime_r(&current_time, &dummy);
-#elif FEATURE_PTHREAD
-   privoxy_mutex_lock(&gmtime_mutex);
-   t = gmtime(&current_time);
-   privoxy_mutex_unlock(&gmtime_mutex);
-#else
-   t = gmtime(&current_time);
-#endif
-
-   /* Format: "Sun, 06 Nov 1994 08:49:37 GMT" */
-   snprintf(buf, buffer_size,
-      "%s, %02d %s %4d %02d:%02d:%02d GMT",
-      day_names[t->tm_wday],
-      t->tm_mday,
-      month_names[t->tm_mon],
-      t->tm_year + 1900,
-      t->tm_hour,
-      t->tm_min,
-      t->tm_sec
-      );
-
-}
-
-/*********************************************************************
- *
- * Function    :  get_locale_time
- *
- * Description :  Get the time in a date(1)-like format
- *                according to the current locale - e.g.:
- *                "Fri Aug 29 19:37:12 CEST 2008"
- *
- *                XXX: Should we allow the user to change the format?
- *
- * Parameters  :
- *          1  :  buf         = Destination for result.
- *          2  :  buffer_size = Size of the buffer above. Must be big
- *                              enough to hold 29 characters plus a
- *                              trailing zero.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void get_locale_time(char *buf, size_t buffer_size)
-{
-   struct tm *timeptr;
-   time_t current_time;
-#if defined(HAVE_LOCALTIME_R)
-   struct tm dummy;
-#endif
-
-   assert(buf);
-   assert(buffer_size > (size_t)29);
-
-   time(&current_time);
-
-#if HAVE_LOCALTIME_R
-   timeptr = localtime_r(&current_time, &dummy);
-#elif FEATURE_PTHREAD
-   privoxy_mutex_lock(&localtime_mutex);
-   timeptr = localtime(&current_time);
-   privoxy_mutex_unlock(&localtime_mutex);
-#else
-   timeptr = localtime(&current_time);
-#endif
-
-   strftime(buf, buffer_size, "%a %b %d %X %Z %Y", timeptr);
-
-}
-
-/*********************************************************************
- *
- * Function    :  finish_http_response
- *
- * Description :  Fill in the missing headers in an http response,
- *                and flatten the headers to an http head.
- *                For HEAD requests the body is freed once
- *                the Content-Length header is set.
- *
- * Parameters  :
- *          1  :  rsp = pointer to http_response to be processed
- *
- * Returns     :  A http_response, usually the rsp parameter.
- *                On error, free()s rsp and returns cgi_error_memory()
- *
- *********************************************************************/
-struct http_response *finish_http_response(const struct client_state *csp, struct http_response *rsp)
-{
-   char buf[BUFFER_SIZE];
-   jb_err err;
-
-   /* Special case - do NOT change this statically allocated response,
-    * which is ready for output anyway.
-    */
-   if (rsp == cgi_error_memory_response)
-   {
-      return rsp;
-   }
-
-   /* 
-    * Fill in the HTTP Status, using HTTP/1.1
-    * unless the client asked for HTTP/1.0.
-    */
-   snprintf(buf, sizeof(buf), "%s %s",
-      strcmpic(csp->http->ver, "HTTP/1.0") ? "HTTP/1.1" : "HTTP/1.0",
-      rsp->status ? rsp->status : "200 OK");
-   err = enlist_first(rsp->headers, buf);
-
-   /* 
-    * Set the Content-Length
-    */
-   if (rsp->content_length == 0)
-   {
-      rsp->content_length = rsp->body ? strlen(rsp->body) : 0;
-   }
-   if (!err)
-   {
-      snprintf(buf, sizeof(buf), "Content-Length: %d", (int)rsp->content_length);
-      err = enlist(rsp->headers, buf);
-   }
-
-   if (0 == strcmpic(csp->http->gpc, "head"))
-   {
-      /*
-       * The client only asked for the head. Dispose
-       * the body and log an offensive message.
-       *
-       * While it may seem to be a bit inefficient to
-       * prepare the body if it isn't needed, it's the
-       * only way to get the Content-Length right for
-       * dynamic pages. We could have disposed the body
-       * earlier, but not without duplicating the
-       * Content-Length setting code above.
-       */
-      log_error(LOG_LEVEL_CGI, "Preparing to give head to %s.", csp->ip_addr_str);
-      freez(rsp->body);
-      rsp->content_length = 0;
-   }
-
-   if (strncmpic(rsp->status, "302", 3))
-   {
-      /*
-       * If it's not a redirect without any content,
-       * set the Content-Type to text/html if it's
-       * not already specified.
-       */
-      if (!err) err = enlist_unique(rsp->headers, "Content-Type: text/html", 13);
-   }
-
-   /*
-    * Fill in the rest of the default headers:
-    *
-    * Date: set to current date/time.
-    * Last-Modified: set to date/time the page was last changed.
-    * Expires: set to date/time page next needs reloading.
-    * Cache-Control: set to "no-cache" if applicable.
-    * 
-    * See http://www.w3.org/Protocols/rfc2068/rfc2068
-    */
-   if (rsp->is_static)
-   {
-      /*
-       * Set Expires to about 10 min into the future so it'll get reloaded
-       * occasionally, e.g. if Privoxy gets upgraded.
-       */
-
-      if (!err)
-      {
-         get_http_time(0, buf, sizeof(buf));
-         err = enlist_unique_header(rsp->headers, "Date", buf);
-      }
-
-      /* Some date in the past. */
-      if (!err) err = enlist_unique_header(rsp->headers, "Last-Modified", "Sat, 17 Jun 2000 12:00:00 GMT");
-
-      if (!err)
-      {
-         get_http_time(10 * 60, buf, sizeof(buf)); /* 10 * 60sec = 10 minutes */
-         err = enlist_unique_header(rsp->headers, "Expires", buf);
-      }
-   }
-   else if (!strncmpic(rsp->status, "302", 3))
-   {
-      get_http_time(0, buf, sizeof(buf));
-      if (!err) err = enlist_unique_header(rsp->headers, "Date", buf);
-   }
-   else
-   {
-      /*
-       * Setting "Cache-Control" to "no-cache" and  "Expires" to
-       * the current time doesn't exactly forbid caching, it just
-       * requires the client to revalidate the cached copy.
-       *
-       * If a temporary problem occurs and the user tries again after
-       * getting Privoxy's error message, a compliant browser may set the
-       * If-Modified-Since header with the content of the error page's
-       * Last-Modified header. More often than not, the document on the server
-       * is older than Privoxy's error message, the server would send status code
-       * 304 and the browser would display the outdated error message again and again.
-       *
-       * For documents delivered with status code 403, 404 and 503 we set "Last-Modified"
-       * to Tim Berners-Lee's birthday, which predates the age of any page on the web
-       * and can be safely used to "revalidate" without getting a status code 304.
-       *
-       * There is no need to let the useless If-Modified-Since header reach the
-       * server, it is therefore stripped by client_if_modified_since in parsers.c.
-       */
-      if (!err) err = enlist_unique_header(rsp->headers, "Cache-Control", "no-cache");
-
-      get_http_time(0, buf, sizeof(buf));
-      if (!err) err = enlist_unique_header(rsp->headers, "Date", buf);
-      if (!strncmpic(rsp->status, "403", 3)
-       || !strncmpic(rsp->status, "404", 3)
-       || !strncmpic(rsp->status, "503", 3))
-      {
-         if (!err) err = enlist_unique_header(rsp->headers, "Last-Modified", "Wed, 08 Jun 1955 12:00:00 GMT");
-      }
-      else
-      {
-         if (!err) err = enlist_unique_header(rsp->headers, "Last-Modified", buf);
-      }
-      if (!err) err = enlist_unique_header(rsp->headers, "Expires", "Sat, 17 Jun 2000 12:00:00 GMT");
-      if (!err) err = enlist_unique_header(rsp->headers, "Pragma", "no-cache");
-   }
-
-   /*
-    * Quoting RFC 2616:
-    *
-    * HTTP/1.1 applications that do not support persistent connections MUST
-    * include the "close" connection option in every message.
-    */
-   if (!err) err = enlist_unique_header(rsp->headers, "Connection", "close");
-
-   /* 
-    * Write the head
-    */
-   if (err || (NULL == (rsp->head = list_to_text(rsp->headers))))
-   {
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-   rsp->head_length = strlen(rsp->head);
-
-   return rsp;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  alloc_http_response
- *
- * Description :  Allocates a new http_response structure.
- *
- * Parameters  :  N/A
- *
- * Returns     :  pointer to a new http_response, or NULL.
- *
- *********************************************************************/
-struct http_response *alloc_http_response(void)
-{
-   return (struct http_response *) zalloc(sizeof(struct http_response));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  free_http_response
- *
- * Description :  Free the memory occupied by an http_response
- *                and its depandant structures.
- *
- * Parameters  :
- *          1  :  rsp = pointer to http_response to be freed
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_http_response(struct http_response *rsp)
-{
-   /*
-    * Must special case cgi_error_memory_response, which is never freed.
-    */
-   if (rsp && (rsp != cgi_error_memory_response))
-   {
-      freez(rsp->status);
-      freez(rsp->head);
-      freez(rsp->body);
-      destroy_list(rsp->headers);
-      free(rsp);
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  template_load
- *
- * Description :  CGI support function that loads a given HTML
- *                template, ignoring comment lines and following
- *                #include statements up to a depth of 1.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  template_ptr = Destination for pointer to loaded
- *                               template text.
- *          3  :  templatename = name of the HTML template to be used
- *          4  :  recursive = Flag set if this function calls itself
- *                            following an #include statament
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *                JB_ERR_FILE if the template file cannot be read
- *
- *********************************************************************/
-jb_err template_load(const struct client_state *csp, char **template_ptr, 
-                     const char *templatename, int recursive)
-{
-   jb_err err;
-   char *templates_dir_path;
-   char *full_path;
-   char *file_buffer;
-   char *included_module;
-   const char *p;
-   FILE *fp;
-   char buf[BUFFER_SIZE];
-
-   assert(csp);
-   assert(template_ptr);
-   assert(templatename);
-
-   *template_ptr = NULL;
-
-   /* Validate template name.  Paranoia. */
-   for (p = templatename; *p != 0; p++)
-   {
-      if ( ((*p < 'a') || (*p > 'z'))
-        && ((*p < 'A') || (*p > 'Z'))
-        && ((*p < '0') || (*p > '9'))
-        && (*p != '-')
-        && (*p != '.'))
-      {
-         /* Illegal character */
-         return JB_ERR_FILE;
-      }
-   }
-
-   /*
-    * Generate full path using either templdir
-    * or confdir/templates as base directory.
-    */
-   if (NULL != csp->config->templdir)
-   {
-      templates_dir_path = strdup(csp->config->templdir);
-   }
-   else
-   {
-      templates_dir_path = make_path(csp->config->confdir, "templates");
-   }
-
-   if (templates_dir_path == NULL)
-   {
-      log_error(LOG_LEVEL_ERROR, "Out of memory while generating template path for %s.",
-         templatename);
-      return JB_ERR_MEMORY;
-   }
-
-   full_path = make_path(templates_dir_path, templatename);
-   free(templates_dir_path);
-   if (full_path == NULL)
-   {
-      log_error(LOG_LEVEL_ERROR, "Out of memory while generating full template path for %s.",
-         templatename);
-      return JB_ERR_MEMORY;
-   }
-
-   /* Allocate buffer */
-
-   file_buffer = strdup("");
-   if (file_buffer == NULL)
-   {
-      log_error(LOG_LEVEL_ERROR, "Not enough free memory to buffer %s.", full_path);
-      free(full_path);
-      return JB_ERR_MEMORY;
-   }
-
-   /* Open template file */
-
-   if (NULL == (fp = fopen(full_path, "r")))
-   {
-      log_error(LOG_LEVEL_ERROR, "Cannot open template file %s: %E", full_path);
-      free(full_path);
-      free(file_buffer);
-      return JB_ERR_FILE;
-   }
-   free(full_path);
-
-   /* 
-    * Read the file, ignoring comments, and honoring #include
-    * statements, unless we're already called recursively.
-    *
-    * XXX: The comment handling could break with lines lengths > sizeof(buf).
-    *      This is unlikely in practise.
-    */
-   while (fgets(buf, sizeof(buf), fp))
-   {
-      if (!recursive && !strncmp(buf, "#include ", 9))
-      {
-         if (JB_ERR_OK != (err = template_load(csp, &included_module, chomp(buf + 9), 1)))
-         {
-            free(file_buffer);
-            fclose(fp);
-            return err;
-         }
-
-         if (string_join(&file_buffer, included_module))
-         {
-            fclose(fp);
-            return JB_ERR_MEMORY;
-         }
-
-         continue;
-      }
-
-      /* skip lines starting with '#' */
-      if (*buf == '#')
-      {
-         continue;
-      }
-
-      if (string_append(&file_buffer, buf))
-      {
-         fclose(fp);
-         return JB_ERR_MEMORY;
-      }
-   }
-   fclose(fp);
-
-   *template_ptr = file_buffer;
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  template_fill
- *
- * Description :  CGI support function that fills in a pre-loaded
- *                HTML template by replacing @name@ with value using
- *                pcrs, for each item in the output map.
- *
- *                Note that a leading '$' charachter in the export map's
- *                values will be stripped and toggle on backreference
- *                interpretation.
- *
- * Parameters  :
- *          1  :  template_ptr = IN: Template to be filled out.
- *                                   Will be free()d.
- *                               OUT: Filled out template.
- *                                    Caller must free().
- *          2  :  exports = map with fill in symbol -> name pairs
- *
- * Returns     :  JB_ERR_OK on success (and for uncritical errors)
- *                JB_ERR_MEMORY on out-of-memory error
- *
- *********************************************************************/
-jb_err template_fill(char **template_ptr, const struct map *exports)
-{
-   struct map_entry *m;
-   pcrs_job *job;
-   char buf[BUFFER_SIZE];
-   char *tmp_out_buffer;
-   char *file_buffer;
-   size_t size;
-   int error;
-   const char *flags;
-
-   assert(template_ptr);
-   assert(*template_ptr);
-   assert(exports);
-
-   file_buffer = *template_ptr;
-   size = strlen(file_buffer) + 1;
-
-   /* 
-    * Assemble pcrs joblist from exports map
-    */
-   for (m = exports->first; m != NULL; m = m->next)
-   {
-      if (*m->name == '$')
-      {
-         /*
-          * First character of name is '$', so remove this flag
-          * character and allow backreferences ($1 etc) in the
-          * "replace with" text.
-          */
-         snprintf(buf, sizeof(buf), "%s", m->name + 1);
-         flags = "sigU";
-      }
-      else
-      {
-         /*
-          * Treat the "replace with" text as a literal string - 
-          * no quoting needed, no backreferences allowed.
-          * ("Trivial" ['T'] flag).
-          */
-         flags = "sigTU";
-
-         /* Enclose name in @@ */
-         snprintf(buf, sizeof(buf), "@%s@", m->name);
-      }
-
-      log_error(LOG_LEVEL_CGI, "Substituting: s/%s/%s/%s", buf, m->value, flags);
-
-      /* Make and run job. */
-      job = pcrs_compile(buf, m->value, flags,  &error);
-      if (job == NULL) 
-      {
-         if (error == PCRS_ERR_NOMEM)
-         {
-            free(file_buffer);
-            *template_ptr = NULL;
-            return JB_ERR_MEMORY;
-         }
-         else
-         {
-            log_error(LOG_LEVEL_ERROR, "Error compiling template fill job %s: %d", m->name, error);
-            /* Hope it wasn't important and silently ignore the invalid job */
-         }
-      }
-      else
-      {
-         error = pcrs_execute(job, file_buffer, size, &tmp_out_buffer, &size);
-
-         pcrs_free_job(job);
-         if (NULL == tmp_out_buffer)
-         {
-            *template_ptr = NULL;
-            return JB_ERR_MEMORY;
-         }
-
-         if (error < 0)
-         {
-            /* 
-             * Substitution failed, keep the original buffer,
-             * log the problem and ignore it.
-             * 
-             * The user might see some unresolved @CGI_VARIABLES@,
-             * but returning a special CGI error page seems unreasonable
-             * and could mask more important error messages.
-             */
-            free(tmp_out_buffer);
-            log_error(LOG_LEVEL_ERROR, "Failed to execute s/%s/%s/%s. %s",
-               buf, m->value, flags, pcrs_strerror(error));
-         }
-         else
-         {
-            /* Substitution succeeded, use modified buffer. */
-            free(file_buffer);
-            file_buffer = tmp_out_buffer;
-         }
-      }
-   }
-
-   /*
-    * Return
-    */
-   *template_ptr = file_buffer;
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  template_fill_for_cgi
- *
- * Description :  CGI support function that loads a HTML template
- *                and fills it in.  Handles file-not-found errors
- *                by sending a HTML error message.  For convenience,
- *                this function also frees the passed "exports" map.
- *
- * Parameters  :
- *          1  :  csp = Client state
- *          2  :  templatename = name of the HTML template to be used
- *          3  :  exports = map with fill in symbol -> name pairs.
- *                          Will be freed by this function.
- *          4  :  rsp = Response structure to fill in.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error
- *
- *********************************************************************/
-jb_err template_fill_for_cgi(const struct client_state *csp,
-                             const char *templatename,
-                             struct map *exports,
-                             struct http_response *rsp)
-{
-   jb_err err;
-   
-   assert(csp);
-   assert(templatename);
-   assert(exports);
-   assert(rsp);
-
-   err = template_load(csp, &rsp->body, templatename, 0);
-   if (err == JB_ERR_FILE)
-   {
-      free_map(exports);
-      return cgi_error_no_template(csp, rsp, templatename);
-   }
-   else if (err)
-   {
-      free_map(exports);
-      return err; /* JB_ERR_MEMORY */
-   }
-   err = template_fill(&rsp->body, exports);
-   free_map(exports);
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  default_exports
- *
- * Description :  returns a struct map list that contains exports
- *                which are common to all CGI functions.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  caller = name of CGI who calls us and which should
- *                         be excluded from the generated menu. May be
- *                         NULL.
- * Returns     :  NULL if no memory, else a new map.  Caller frees.
- *
- *********************************************************************/
-struct map *default_exports(const struct client_state *csp, const char *caller)
-{
-   char buf[30];
-   jb_err err;
-   struct map * exports;
-   int local_help_exists = 0;
-   char *ip_address = NULL;
-   char *hostname = NULL;
-
-   assert(csp);
-
-   exports = new_map();
-   if (exports == NULL)
-   {
-      return NULL;
-   }
-
-   if (csp->config->hostname)
-   {
-      get_host_information(csp->cfd, &ip_address, NULL);
-      hostname = strdup(csp->config->hostname);
-   }
-   else
-   {
-      get_host_information(csp->cfd, &ip_address, &hostname);
-   }
-
-   err = map(exports, "version", 1, html_encode(VERSION), 0);
-   get_locale_time(buf, sizeof(buf));
-   if (!err) err = map(exports, "time",          1, html_encode(buf), 0);
-   if (!err) err = map(exports, "my-ip-address", 1, html_encode(ip_address ? ip_address : "unknown"), 0);
-   freez(ip_address);
-   if (!err) err = map(exports, "my-hostname",   1, html_encode(hostname ? hostname : "unknown"), 0);
-   freez(hostname);
-   if (!err) err = map(exports, "homepage",      1, html_encode(HOME_PAGE_URL), 0);
-   if (!err) err = map(exports, "default-cgi",   1, html_encode(CGI_PREFIX), 0);
-   if (!err) err = map(exports, "menu",          1, make_menu(caller, csp->config->feature_flags), 0);
-   if (!err) err = map(exports, "code-status",   1, CODE_STATUS, 1);
-   if (!strncmpic(csp->config->usermanual, "file://", 7) ||
-       !strncmpic(csp->config->usermanual, "http", 4))
-   {
-      /* Manual is located somewhere else, just link to it. */
-      if (!err) err = map(exports, "user-manual", 1, html_encode(csp->config->usermanual), 0);
-   }
-   else
-   {
-      /* Manual is delivered by Privoxy. */
-      if (!err) err = map(exports, "user-manual", 1, html_encode(CGI_PREFIX"user-manual/"), 0);
-   }
-   if (!err) err = map(exports, "actions-help-prefix", 1, ACTIONS_HELP_PREFIX ,1);
-#ifdef FEATURE_TOGGLE
-   if (!err) err = map_conditional(exports, "enabled-display", global_toggle_state);
-#else
-   if (!err) err = map_block_killer(exports, "can-toggle");
-#endif
-
-   snprintf(buf, sizeof(buf), "%d", csp->config->hport);
-   if (!err) err = map(exports, "my-port", 1, buf, 1);
-
-   if(!strcmp(CODE_STATUS, "stable"))
-   {
-      if (!err) err = map_block_killer(exports, "unstable");
-   }
-
-   if (csp->config->admin_address != NULL)
-   {
-      if (!err) err = map(exports, "admin-address", 1, html_encode(csp->config->admin_address), 0);
-      local_help_exists = 1;
-   }
-   else
-   {
-      if (!err) err = map_block_killer(exports, "have-adminaddr-info");
-   }
-
-   if (csp->config->proxy_info_url != NULL)
-   {
-      if (!err) err = map(exports, "proxy-info-url", 1, html_encode(csp->config->proxy_info_url), 0);
-      local_help_exists = 1;
-   }
-   else
-   {
-      if (!err) err = map_block_killer(exports, "have-proxy-info");
-   }
-
-   if (local_help_exists == 0)
-   {
-      if (!err) err = map_block_killer(exports, "have-help-info");
-   }
-
-   if (err)
-   {
-      free_map(exports);
-      return NULL;
-   }
-
-   return exports;
-}
-
-
-/*********************************************************************
- *
- * Function    :  map_block_killer
- *
- * Description :  Convenience function.
- *                Adds a "killer" for the conditional HTML-template
- *                block <name>, i.e. a substitution of the regex
- *                "if-<name>-start.*if-<name>-end" to the given
- *                export list.
- *
- * Parameters  :  
- *          1  :  exports = map to extend
- *          2  :  name = name of conditional block
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err map_block_killer(struct map *exports, const char *name)
-{
-   char buf[1000]; /* Will do, since the names are hardwired */
-
-   assert(exports);
-   assert(name);
-   assert(strlen(name) < (size_t)490);
-
-   snprintf(buf, sizeof(buf), "if-%s-start.*if-%s-end", name, name);
-   return map(exports, buf, 1, "", 1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  map_block_keep
- *
- * Description :  Convenience function.  Removes the markers used
- *                by map-block-killer, to save a few bytes.
- *                i.e. removes "@if-<name>-start@" and "@if-<name>-end@"
- *
- * Parameters  :  
- *          1  :  exports = map to extend
- *          2  :  name = name of conditional block
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err map_block_keep(struct map *exports, const char *name)
-{
-   jb_err err;
-   char buf[500]; /* Will do, since the names are hardwired */
-
-   assert(exports);
-   assert(name);
-   assert(strlen(name) < (size_t)490);
-
-   snprintf(buf, sizeof(buf), "if-%s-start", name);
-   err = map(exports, buf, 1, "", 1);
-
-   if (err)
-   {
-      return err;
-   }
-
-   snprintf(buf, sizeof(buf), "if-%s-end", name);
-   return map(exports, buf, 1, "", 1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  map_conditional
- *
- * Description :  Convenience function.
- *                Adds an "if-then-else" for the conditional HTML-template
- *                block <name>, i.e. a substitution of the form:
- *                @if-<name>-then@
- *                   True text
- *                @else-not-<name>@
- *                   False text
- *                @endif-<name>@
- *
- *                The control structure and one of the alternatives
- *                will be hidden.
- *
- * Parameters  :  
- *          1  :  exports = map to extend
- *          2  :  name = name of conditional block
- *          3  :  choose_first = nonzero for first, zero for second.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err map_conditional(struct map *exports, const char *name, int choose_first)
-{
-   char buf[1000]; /* Will do, since the names are hardwired */
-   jb_err err;
-
-   assert(exports);
-   assert(name);
-   assert(strlen(name) < (size_t)480);
-
-   snprintf(buf, sizeof(buf), (choose_first
-      ? "else-not-%s@.*@endif-%s"
-      : "if-%s-then@.*@else-not-%s"),
-      name, name);
-
-   err = map(exports, buf, 1, "", 1);
-   if (err)
-   {
-      return err;
-   }
-
-   snprintf(buf, sizeof(buf), (choose_first ? "if-%s-then" : "endif-%s"), name);
-   return map(exports, buf, 1, "", 1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  make_menu
- *
- * Description :  Returns an HTML-formatted menu of the available 
- *                unhidden CGIs, excluding the one given in <self>
- *                and the toggle CGI if toggling is disabled.
- *
- * Parameters  :
- *          1  :  self = name of CGI to leave out, can be NULL for
- *                complete listing.
- *          2  :  feature_flags = feature bitmap from csp->config
- *                
- *
- * Returns     :  menu string, or NULL on out-of-memory error.
- *
- *********************************************************************/
-char *make_menu(const char *self, const unsigned feature_flags)
-{
-   const struct cgi_dispatcher *d;
-   char *result = strdup("");
-
-   if (self == NULL)
-   {
-      self = "NO-SUCH-CGI!";
-   }
-
-   /* List available unhidden CGI's and export as "other-cgis" */
-   for (d = cgi_dispatchers; d->name; d++)
-   {
-
-#ifdef FEATURE_TOGGLE
-      if (!(feature_flags & RUNTIME_FEATURE_CGI_TOGGLE) && !strcmp(d->name, "toggle"))
-      {
-         /*
-          * Suppress the toggle link if remote toggling is disabled.
-          */
-         continue;
-      }
-#endif /* def FEATURE_TOGGLE */
-
-      if (d->description && strcmp(d->name, self))
-      {
-         char *html_encoded_prefix;
-
-         /*
-          * Line breaks would be great, but break
-          * the "blocked" template's JavaScript.
-          */
-         string_append(&result, "<li><a href=\"");
-         html_encoded_prefix = html_encode(CGI_PREFIX);
-         if (html_encoded_prefix == NULL)
-         {
-            return NULL;  
-         }
-         else
-         {
-            string_append(&result, html_encoded_prefix);
-            free(html_encoded_prefix);
-         }
-         string_append(&result, d->name);
-         string_append(&result, "\">");
-         string_append(&result, d->description);
-         string_append(&result, "</a></li>");
-      }
-   }
-
-   return result;
-}
-
-
-/*********************************************************************
- *
- * Function    :  dump_map
- *
- * Description :  HTML-dump a map for debugging (as table)
- *
- * Parameters  :
- *          1  :  the_map = map to dump
- *
- * Returns     :  string with HTML
- *
- *********************************************************************/
-char *dump_map(const struct map *the_map)
-{
-   struct map_entry *cur_entry;
-   char *ret = strdup("");
-
-   string_append(&ret, "<table>\n");
-
-   for (cur_entry = the_map->first;
-        (cur_entry != NULL) && (ret != NULL);
-        cur_entry = cur_entry->next)
-   {
-      string_append(&ret, "<tr><td><b>");
-      string_join  (&ret, html_encode(cur_entry->name));
-      string_append(&ret, "</b></td><td>");
-      string_join  (&ret, html_encode(cur_entry->value));
-      string_append(&ret, "</td></tr>\n");
-   }
-
-   string_append(&ret, "</table>\n");
-   return ret;
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/cgi.h b/external/privoxy/cgi.h
deleted file mode 100644
index 6228b32..0000000
--- a/external/privoxy/cgi.h
+++ /dev/null
@@ -1,289 +0,0 @@
-#ifndef CGI_H_INCLUDED
-#define CGI_H_INCLUDED
-#define CGI_H_VERSION "$Id: cgi.h,v 1.35 2008/05/21 15:24:37 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cgi.h,v $
- *
- * Purpose     :  Declares functions to intercept request, generate
- *                html or gif answers, and to compose HTTP resonses.
- *                
- *                Functions declared include:
- * 
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cgi.h,v $
- *    Revision 1.35  2008/05/21 15:24:37  fabiankeil
- *    Mark csp as immutable for a bunch of functions.
- *
- *    Revision 1.34  2008/04/17 14:40:48  fabiankeil
- *    Provide get_http_time() with the buffer size so it doesn't
- *    have to blindly assume that the buffer is big enough.
- *
- *    Revision 1.33  2007/01/28 13:41:17  fabiankeil
- *    - Add HEAD support to finish_http_response.
- *    - Add error favicon to internal HTML error messages.
- *
- *    Revision 1.32  2006/12/17 17:53:39  fabiankeil
- *    Suppress the toggle link if remote toggling is disabled.
- *
- *    Revision 1.31  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.29.2.2  2004/02/17 13:30:23  oes
- *    Moved cgi_error_disabled() from cgiedit.c to
- *    cgi.c to re-enable build with --disable-editor.
- *    Fixes Bug #892744. Thanks to Matthew Fischer
- *    for spotting.
- *
- *    Revision 1.29.2.1  2003/12/17 16:33:28  oes
- *    Added prototype of new function cgi_redirect
- *
- *    Revision 1.29  2002/05/19 11:33:21  jongfoster
- *    If a CGI error was not handled, and propogated back to
- *    dispatch_known_cgi(), then it was assumed to be "out of memory".
- *    This gave a very misleading error message.
- *
- *    Now other errors will cause a simple message giving the error
- *    number and asking the user to report a bug.
- *
- *    Bug report:
- *    http://sourceforge.net/tracker/index.php?func=detail
- *    &aid=557905&group_id=11118&atid=111118
- *
- *    Revision 1.28  2002/04/26 12:54:03  oes
- *    New function add_help_link
- *
- *    Revision 1.27  2002/04/24 02:16:51  oes
- *    Moved get_char_param, get_string_param and get_number_param here from cgiedit.c
- *
- *    Revision 1.26  2002/04/10 13:38:35  oes
- *    load_template signature changed
- *
- *    Revision 1.25  2002/04/08 20:50:25  swa
- *    fixed JB spelling
- *
- *    Revision 1.24  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.23  2002/03/24 16:18:15  jongfoster
- *    Removing old logo
- *
- *    Revision 1.22  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.21  2002/03/07 03:48:38  oes
- *     - Changed built-in images from GIF to PNG
- *       (with regard to Unisys patent issue)
- *     - Added a 4x4 pattern PNG which is less intrusive
- *       than the logo but also clearly marks the deleted banners
- *
- *    Revision 1.20  2002/03/04 17:53:22  oes
- *    Fixed compiled warning
- *
- *    Revision 1.19  2002/01/21 00:33:52  jongfoster
- *    Adding map_block_keep() to save a few bytes in the edit-actions-list HTML.
- *
- *    Revision 1.18  2001/11/16 00:46:31  jongfoster
- *    Fixing compiler warnings
- *
- *    Revision 1.17  2001/10/23 21:48:19  jongfoster
- *    Cleaning up error handling in CGI functions - they now send back
- *    a HTML error page and should never cause a FATAL error.  (Fixes one
- *    potential source of "denial of service" attacks).
- *
- *    CGI actions file editor that works and is actually useful.
- *
- *    Ability to toggle Junkbuster remotely using a CGI call.
- *
- *    You can turn off both the above features in the main configuration
- *    file, e.g. if you are running a multi-user proxy.
- *
- *    Revision 1.16  2001/09/16 17:08:54  jongfoster
- *    Moving simple CGI functions from cgi.c to new file cgisimple.c
- *
- *    Revision 1.15  2001/09/16 15:02:35  jongfoster
- *    Adding i.j.b/robots.txt.
- *    Inlining add_stats() since it's only ever called from one place.
- *
- *    Revision 1.14  2001/09/16 11:38:02  jongfoster
- *    Splitting fill_template() into 2 functions:
- *    template_load() loads the file
- *    template_fill() performs the PCRS regexps.
- *    This is because the CGI edit interface has a "table row"
- *    template which is used many times in the page - this
- *    change means it's only loaded from disk once.
- *
- *    Revision 1.13  2001/09/16 11:00:10  jongfoster
- *    New function alloc_http_response, for symmetry with free_http_response
- *
- *    Revision 1.12  2001/09/13 23:31:25  jongfoster
- *    Moving image data to cgi.c rather than cgi.h.
- *
- *    Revision 1.11  2001/08/05 16:06:20  jongfoster
- *    Modifiying "struct map" so that there are now separate header and
- *    "map_entry" structures.  This means that functions which modify a
- *    map no longer need to return a pointer to the modified map.
- *    Also, it no longer reverses the order of the entries (which may be
- *    important with some advanced template substitutions).
- *
- *    Revision 1.10  2001/08/01 21:19:22  jongfoster
- *    Moving file version information to a separate CGI page.
- *
- *    Revision 1.9  2001/08/01 00:17:54  jongfoster
- *    Adding prototype for map_conditional
- *
- *    Revision 1.8  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.7  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.6  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.5  2001/06/29 13:22:44  oes
- *    - Cleaned up
- *    - Added new functions: default_exports(), make_menu(),
- *      error_response() etc, ranamed others and changed
- *      param and return types.
- *    - Removed HTTP/HTML snipplets
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.4  2001/06/09 10:50:58  jongfoster
- *    Changing "show URL info" handler to new style.
- *    Adding "extern" to some function prototypes.
- *
- *    Revision 1.3  2001/06/03 19:12:16  oes
- *    introduced new cgi handling
- *
- *    No revisions before 1.3
- *
- **********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Main dispatch function
- */
-extern struct http_response *dispatch_cgi(struct client_state *csp);
-
-/* Not exactly a CGI */
-extern struct http_response * error_response(struct client_state *csp,
-                                             const char *templatename,
-                                             int err);
-
-/*
- * CGI support functions
- */
-extern struct http_response * alloc_http_response(void);
-extern void free_http_response(struct http_response *rsp);
-
-extern struct http_response *finish_http_response(const struct client_state *csp,
-                                                  struct http_response *rsp);
-
-extern struct map * default_exports(const struct client_state *csp, const char *caller);
-
-extern jb_err map_block_killer (struct map *exports, const char *name);
-extern jb_err map_block_keep   (struct map *exports, const char *name);
-extern jb_err map_conditional  (struct map *exports, const char *name, int choose_first);
-
-extern jb_err template_load(const struct client_state *csp, char ** template_ptr, 
-                            const char *templatename, int recursive);
-extern jb_err template_fill(char ** template_ptr, const struct map *exports);
-extern jb_err template_fill_for_cgi(const struct client_state *csp,
-                                    const char *templatename,
-                                    struct map *exports,
-                                    struct http_response *rsp);
-
-extern void cgi_init_error_messages(void);
-extern struct http_response *cgi_error_memory(void);
-extern jb_err cgi_redirect (struct http_response * rsp, const char *target);
-
-extern jb_err cgi_error_no_template(const struct client_state *csp,
-                                    struct http_response *rsp,
-                                    const char *template_name);
-extern jb_err cgi_error_bad_param(const struct client_state *csp,
-                                  struct http_response *rsp);
-extern jb_err cgi_error_disabled(const struct client_state *csp,
-                                 struct http_response *rsp);
-extern jb_err cgi_error_unknown(const struct client_state *csp,
-                         struct http_response *rsp,
-                         jb_err error_to_report);
-
-extern jb_err get_number_param(struct client_state *csp,
-                               const struct map *parameters,
-                               char *name,
-                               unsigned *pvalue);
-extern jb_err get_string_param(const struct map *parameters,
-                               const char *param_name,
-                               const char **pparam);
-extern char   get_char_param(const struct map *parameters,
-                             const char *param_name);
-
-/*
- * Text generators
- */
-extern void get_http_time(int time_offset, char *buf, size_t buffer_size);
-extern char *add_help_link(const char *item, struct configuration_spec *config);
-extern char *make_menu(const char *self, const unsigned feature_flags);
-extern char *dump_map(const struct map *the_map);
-
-/*
- * Ad replacement images
- */
-extern const char image_pattern_data[];
-extern const size_t  image_pattern_length;
-extern const char image_blank_data[];
-extern const size_t  image_blank_length;
-
-/* Revision control strings from this header and associated .c file */
-extern const char cgi_rcs[];
-extern const char cgi_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef CGI_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/cgiedit.c b/external/privoxy/cgiedit.c
deleted file mode 100644
index 6fca21f..0000000
--- a/external/privoxy/cgiedit.c
+++ /dev/null
@@ -1,4924 +0,0 @@
-const char cgiedit_rcs[] = "$Id: cgiedit.c,v 1.65 2009/03/08 14:19:22 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cgiedit.c,v $
- *
- * Purpose     :  CGI-based actionsfile editor.
- *
- *                Functions declared include: cgi_edit_*
- *
- *                NOTE: The CGIs in this file use parameter names
- *                such as "f" and "s" which are really *BAD* choices.
- *                However, I'm trying to save bytes in the
- *                edit-actions-list HTML page - the standard actions
- *                file generated a 550kbyte page, which is ridiculous.
- *
- *                Stick to the short names in this file for consistency.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2008 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cgiedit.c,v $
- *    Revision 1.65  2009/03/08 14:19:22  fabiankeil
- *    Fix justified (but harmless) compiler warnings
- *    on platforms where sizeof(int) < sizeof(long).
- *
- *    Revision 1.64  2009/03/01 18:43:09  fabiankeil
- *    Fix cparser warnings.
- *
- *    Revision 1.63  2008/12/04 18:15:38  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.62  2008/08/31 15:59:02  fabiankeil
- *    There's no reason to let remote toggling support depend
- *    on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't.
- *
- *    Revision 1.61  2008/03/24 18:12:52  fabiankeil
- *    Use sizeof() more often.
- *
- *    Revision 1.60  2008/03/15 14:52:35  fabiankeil
- *    Add CGI editor support for the "disable all filters of this type"
- *    directives "-client-header-filter", "-server-header-filter",
- *    "-client-header-tagger" and "-server-header-tagger".
- *
- *    Revision 1.59  2008/03/08 16:25:56  fabiankeil
- *    After three file modification time mismatches, turn the CGI editor off.
- *
- *    Revision 1.58  2007/11/28 17:57:01  fabiankeil
- *    Fix double free in cgi_edit_actions_list().
- *    Reported by adlab in BR#1840145.
- *
- *    Revision 1.57  2007/10/27 13:32:23  fabiankeil
- *    Plug minor 5-year-old memory leak. Spotted by
- *    Valgrind and triggered by Privoxy-Regression-Test.
- *
- *    Revision 1.56  2007/08/05 13:47:03  fabiankeil
- *    #1763173 from Stefan Huehner: s@const static@static const@.
- *
- *    Revision 1.55  2007/05/31 11:50:20  fabiankeil
- *    Re-enable support for old-school URLs like
- *    http://config.privoxy.org/edit-actions-list?f=default
- *    in the action editor.
- *
- *    They are no longer used by the CGI pages, but make it easier
- *    to reach the editor directly, without knowing the requested
- *    file's index in csp->config->actions_file[].
- *
- *    Revision 1.54  2007/05/14 10:33:51  fabiankeil
- *    - Use strlcpy() and strlcat() instead of strcpy() and strcat().
- *
- *    Revision 1.53  2007/04/15 16:39:20  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.52  2007/04/12 10:41:23  fabiankeil
- *    - Don't mistake VC++'s _snprintf() for a snprintf() replacement.
- *    - Move some cgi_edit_actions_for_url() variables into structs.
- *    - Remove bogus comment.
- *
- *    Revision 1.51  2007/04/08 13:21:05  fabiankeil
- *    Reference action files in CGI URLs by id instead
- *    of using the first part of the file name.
- *    Fixes BR 1694250 and BR 1590556.
- *
- *    Revision 1.50  2007/03/29 11:40:34  fabiankeil
- *    Divide @filter-params@ into @client-header-filter-params@
- *    @content-filter-params@ and @server-header-filter-params@.
- *
- *    Revision 1.49  2007/03/20 15:16:34  fabiankeil
- *    Use dedicated header filter actions instead of abusing "filter".
- *    Replace "filter-client-headers" and "filter-client-headers"
- *    with "server-header-filter" and "client-header-filter".
- *
- *    Revision 1.48  2007/02/13 14:35:25  fabiankeil
- *    Replace hash escaping code to prevent
- *    crashes, memory and file corruption.
- *
- *    Revision 1.47  2006/12/28 18:04:25  fabiankeil
- *    Fixed gcc43 conversion warnings.
- *
- *    Revision 1.46  2006/12/27 18:44:52  fabiankeil
- *    Stop shadowing string.h's index().
- *
- *    Revision 1.45  2006/12/21 12:57:48  fabiankeil
- *    Add config option "split-large-forms"
- *    to work around the browser bug reported
- *    in BR #1570678.
- *
- *    Revision 1.44  2006/12/09 13:49:16  fabiankeil
- *    Fix configure option --disable-toggle.
- *    Thanks to Peter Thoenen for reporting this.
- *
- *    Revision 1.43  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.41.2.12  2006/01/30 15:16:25  david__schmidt
- *    Remove a little residual debugging info
- *
- *    Revision 1.41.2.11  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.41.2.10  2005/07/04 03:13:43  david__schmidt
- *    Undo some damaging memory leak patches
- *
- *    Revision 1.41.2.9  2005/07/04 00:31:04  david__schmidt
- *    Removing a double free
- *
- *    Revision 1.41.2.8  2005/05/07 21:50:54  david__schmidt
- *    A few memory leaks plugged (mostly on error paths)
- *
- *    Revision 1.41.2.7  2004/02/17 13:30:23  oes
- *    Moved cgi_error_disabled() from cgiedit.c to
- *    cgi.c to re-enable build with --disable-editor.
- *    Fixes Bug #892744. Thanks to Matthew Fischer
- *    for spotting.
- *
- *    Revision 1.41.2.6  2003/12/18 08:13:48  oes
- *    One line lost in last commit
- *
- *    Revision 1.41.2.5  2003/12/17 16:33:47  oes
- *     - All edit functions that redirect back to the list page
- *       now use cgi_redirect
- *     - All redirects now contain useless parameter "foo", whose
- *       value are raw seconds since epoch, in order to force
- *       Opera and Konqueror to properly reload the list. Closes
- *       bug #859993
- *
- *    Revision 1.41.2.4  2003/03/11 11:53:59  oes
- *    Cosmetic: Renamed cryptic variable
- *
- *    Revision 1.41.2.3  2002/11/12 15:01:41  oes
- *    Fix: Don't free uninitialized struct editable_file
- *
- *    Revision 1.41.2.2  2002/08/05 20:02:59  oes
- *    Bugfix: "Insert new section at top" did not work properly if first non-comment line in file was of type FILE_LINE_ACTION
- *
- *    Revision 1.41.2.1  2002/08/02 12:43:14  oes
- *    Fixed bug #588514: first_time now set on a per-string basis in actions_from_radio; javascriptify now called on copies
- *
- *    Revision 1.41  2002/05/21 19:09:45  oes
- *     - Made Add/Edit/Remove URL Submit and Cancel
- *       buttons jump back to relevant section in eal
- *     - Bugfix: remove-url-form needs p export
- *
- *    Revision 1.40  2002/05/19 11:34:35  jongfoster
- *    Handling read-only actions files better - report the actual
- *    error, not "Out of memory"!
- *
- *    Bug report:
- *    http://sourceforge.net/tracker/index.php?func=detail
- *    &aid=557905&group_id=11118&atid=111118
- *
- *    Revision 1.39  2002/05/12 21:39:15  jongfoster
- *    - Adding Doxygen-style comments to structures and #defines.
- *    - Correcting function comments
- *
- *    Revision 1.38  2002/05/03 23:00:38  jongfoster
- *    Support for templates for "standard actions" buttons.
- *    See bug #549871
- *
- *    Revision 1.37  2002/04/30 11:14:52  oes
- *    Made csp the first parameter in *action_to_html
- *
- *    Revision 1.36  2002/04/26 21:53:30  jongfoster
- *    Fixing a memory leak.  (Near, but not caused by, my earlier commit).
- *
- *    Revision 1.35  2002/04/26 21:50:02  jongfoster
- *    Honouring default exports in edit-actions-for-url-filter template.
- *
- *    Revision 1.34  2002/04/26 12:54:17  oes
- *    Adaptions to changes in actions.c
- *
- *    Revision 1.33  2002/04/24 02:17:47  oes
- *     - Moved get_char_param, get_string_param and get_number_param to cgi.c
- *     - Comments
- *     - Activated Jon's code for editing multiple AFs
- *     - cgi_edit_list_actions now provides context-sensitive
- *       help, looks up all action sets from standard.action and
- *       makes buttons for them in the catchall section
- *     - cgi_edit_action_submit now honors a p parameter, looks up
- *       the corresponding action set, and sets the catchall pattern's
- *       actions accordingly.
- *
- *    Revision 1.32  2002/04/19 16:55:31  jongfoster
- *    Fixing newline problems.  If we do our own text file newline
- *    mangling, we don't want the library to do any, so we need to
- *    open the files in *binary* mode.
- *
- *    Revision 1.31  2002/04/18 19:21:08  jongfoster
- *    Added code to detect "conventional" action files, that start
- *    with a set of actions for all URLs (the pattern "/").
- *    These are special-cased in the "edit-actions-list" CGI, so
- *    that a special UI can be written for them.
- *
- *    Revision 1.30  2002/04/10 13:38:35  oes
- *    load_template signature changed
- *
- *    Revision 1.29  2002/04/08 16:59:08  oes
- *    Fixed comment
- *
- *    Revision 1.28  2002/03/27 12:30:29  oes
- *    Deleted unsused variable
- *
- *    Revision 1.27  2002/03/26 23:06:04  jongfoster
- *    Removing duplicate @ifs on the toggle page
- *
- *    Revision 1.26  2002/03/26 22:59:17  jongfoster
- *    Fixing /toggle to display status consistently.
- *
- *    Revision 1.25  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.24  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.23  2002/03/24 13:32:41  swa
- *    name change related issues
- *
- *    Revision 1.22  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.21  2002/03/22 18:02:48  jongfoster
- *    Fixing remote toggle
- *
- *    Revision 1.20  2002/03/16 20:28:34  oes
- *    Added descriptions to the filters so users will know what they select in the cgi editor
- *
- *    Revision 1.19  2002/03/16 18:38:14  jongfoster
- *    Stopping stupid or malicious users from breaking the actions
- *    file using the web-based editor.
- *
- *    Revision 1.18  2002/03/16 14:57:44  jongfoster
- *    Full support for enabling/disabling modular filters.
- *
- *    Revision 1.17  2002/03/16 14:26:42  jongfoster
- *    First version of modular filters support - READ ONLY!
- *    Fixing a double-free bug in the out-of-memory handling in map_radio().
- *
- *    Revision 1.16  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.15  2002/03/06 22:54:35  jongfoster
- *    Automated function-comment nitpicking.
- *
- *    Revision 1.14  2002/03/05 00:24:51  jongfoster
- *    Patch to always edit the current actions file.
- *
- *    Revision 1.13  2002/03/04 02:07:59  david__schmidt
- *    Enable web editing of actions file on OS/2 (it had been broken all this time!)
- *
- *    Revision 1.12  2002/03/03 09:18:03  joergs
- *    Made jumbjuster work on AmigaOS again.
- *
- *    Revision 1.11  2002/01/23 01:03:31  jongfoster
- *    Fixing gcc [CygWin] compiler warnings
- *
- *    Revision 1.10  2002/01/23 00:22:59  jongfoster
- *    Adding new function cgi_edit_actions_section_swap(), to reorder
- *    the actions file.
- *
- *    Adding get_url_spec_param() to get a validated URL pattern.
- *
- *    Moving edit_read_line() out of this file and into loaders.c.
- *
- *    Adding missing html_encode() to many CGI functions.
- *
- *    Moving the functions that #include actionlist.h to the end of the file,
- *    because the Visual C++ 97 debugger gets extremely confused if you try
- *    to debug any code that comes after them in the file.
- *
- *    Major optimizations in cgi_edit_actions_list() to reduce the size of
- *    the generated HTML (down 40% from 550k to 304k), with major side-effects
- *    throughout the editor and templates.  In particular, the length of the
- *    URLs throughout the editor has been drastically reduced, by cutting
- *    paramater names down to 1 character and CGI names down to 3-4
- *    characters, by removing all non-essential CGI paramaters even at the
- *    expense of having to re-read the actions file for the most trivial
- *    page, and by using relative rather than absolute URLs.  This means
- *    that this (typical example):
- *
- *    <a href="http://ijbswa.sourceforge.net/config/edit-actions-url-form?
- *    filename=ijb&amp;ver=1011487572&amp;section=12&amp;pattern=13
- *    &amp;oldval=www.oesterhelt.org%2Fdeanimate-demo">
- *
- *    is now this:
- *
- *    <a href="eau?f=ijb&amp;v=1011487572&amp;p=13">
- *
- *    Revision 1.9  2002/01/17 20:56:22  jongfoster
- *    Replacing hard references to the URL of the config interface
- *    with #defines from project.h
- *
- *    Revision 1.8  2001/11/30 23:35:51  jongfoster
- *    Renaming actionsfile to ijb.action
- *
- *    Revision 1.7  2001/11/13 00:28:24  jongfoster
- *    - Renaming parameters from edit-actions-for-url so that they only
- *      contain legal JavaScript characters.  If we wanted to write
- *      JavaScript that worked with Netscape 4, this is nessacery.
- *      (Note that at the moment the JavaScript doesn't actually work
- *      with Netscape 4, but now this is purely a template issue, not
- *      one affecting code).
- *    - Adding new CGIs for use by non-JavaScript browsers:
- *        edit-actions-url-form
- *        edit-actions-add-url-form
- *        edit-actions-remove-url-form
- *    - Fixing || bug.
- *
- *    Revision 1.6  2001/10/29 03:48:09  david__schmidt
- *    OS/2 native needed a snprintf() routine.  Added one to miscutil, brackedted
- *    by and __OS2__ ifdef.
- *
- *    Revision 1.5  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.4  2001/10/23 21:48:19  jongfoster
- *    Cleaning up error handling in CGI functions - they now send back
- *    a HTML error page and should never cause a FATAL error.  (Fixes one
- *    potential source of "denial of service" attacks).
- *
- *    CGI actions file editor that works and is actually useful.
- *
- *    Ability to toggle JunkBuster remotely using a CGI call.
- *
- *    You can turn off both the above features in the main configuration
- *    file, e.g. if you are running a multi-user proxy.
- *
- *    Revision 1.3  2001/10/14 22:12:49  jongfoster
- *    New version of CGI-based actionsfile editor.
- *    Major changes, including:
- *    - Completely new file parser and file output routines
- *    - edit-actions CGI renamed edit-actions-for-url
- *    - All CGIs now need a filename parameter, except for...
- *    - New CGI edit-actions which doesn't need a filename,
- *      to allow you to start the editor up.
- *    - edit-actions-submit now works, and now automatically
- *      redirects you back to the main edit-actions-list handler.
- *
- *    Revision 1.2  2001/09/16 17:05:14  jongfoster
- *    Removing unused #include showarg.h
- *
- *    Revision 1.1  2001/09/16 15:47:37  jongfoster
- *    First version of CGI-based edit interface.  This is very much a
- *    work-in-progress, and you can't actually use it to edit anything
- *    yet.  You must #define FEATURE_CGI_EDIT_ACTIONS for these changes
- *    to have any effect.
- *
- *
- **********************************************************************/
-
-
-#include "config.h"
-
-/*
- * FIXME: Following includes copied from cgi.c - which are actually needed?
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <ctype.h>
-#include <string.h>
-#include <assert.h>
-#include <sys/stat.h>
-
-#include "project.h"
-#include "cgi.h"
-#include "cgiedit.h"
-#include "cgisimple.h"
-#include "list.h"
-#include "encode.h"
-#include "actions.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "loaders.h"
-#ifdef FEATURE_TOGGLE
-/* loadcfg.h is for global_toggle_state only */
-#include "loadcfg.h"
-#endif /* def FEATURE_TOGGLE */
-#include "urlmatch.h"
-
-const char cgiedit_h_rcs[] = CGIEDIT_H_VERSION;
-
-
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-
-/**
- * A line in an editable_file.
- */
-struct file_line
-{
-   /** Next entry in the linked list */
-   struct file_line * next;
-   
-   /** The raw data, to write out if this line is unmodified. */
-   char * raw;
-   
-   /** Comments and/or whitespace to put before this line if it's modified
-       and then written out. */
-   char * prefix;
-
-   /** The actual data, as a string.  Line continuation and comment removal
-       are performed on the data read from file before it's stored here, so
-       it will be a single line of data.  */
-   char * unprocessed;
-   
-   /** The type of data on this line.  One of the FILE_LINE_xxx constants. */
-   int type;
-
-   /** The actual data, processed into some sensible data type. */
-   union
-   {
-
-      /** An action specification. */
-      struct action_spec action[1];
-
-      /** A name=value pair. */
-      struct
-      {
-
-         /** The name in the name=value pair. */
-         char * name;
-
-         /** The value in the name=value pair, as a string. */
-         char * svalue;
-
-         /** The value in the name=value pair, as an integer. */
-         int ivalue;
-
-      } setting;
-
-      /* Add more data types here... e.g.
-
-
-      struct url_spec url[1];
-
-      struct
-      {
-         struct action_spec action[1];
-         const char * name;
-      } alias;
-
-      */
-
-   } data;
-
-};
-
-/** This file_line has not been processed yet. */
-#define FILE_LINE_UNPROCESSED           1
-
-/** This file_line is blank. Can only appear at the end of a file, due to
-    the way the parser works. */
-#define FILE_LINE_BLANK                 2
-
-/** This file_line says {{alias}}. */
-#define FILE_LINE_ALIAS_HEADER          3
-
-/** This file_line defines an alias. */
-#define FILE_LINE_ALIAS_ENTRY           4
-
-/** This file_line defines an {action}. */
-#define FILE_LINE_ACTION                5
-
-/** This file_line specifies a URL pattern. */
-#define FILE_LINE_URL                   6
-
-/** This file_line says {{settings}}. */
-#define FILE_LINE_SETTINGS_HEADER       7
-
-/** This file_line is in a {{settings}} block. */
-#define FILE_LINE_SETTINGS_ENTRY        8
-
-/** This file_line says {{description}}. */
-#define FILE_LINE_DESCRIPTION_HEADER    9
-
-/** This file_line is in a {{description}} block. */
-#define FILE_LINE_DESCRIPTION_ENTRY    10
-
-/*
- * Number of file modification time mismatches
- * before the CGI editor gets turned off.
- */
-#define ACCEPTABLE_TIMESTAMP_MISMATCHES 3
-
-/**
- * A configuration file, in a format that can be edited and written back to
- * disk.
- */
-struct editable_file
-{
-   struct file_line * lines;  /**< The contents of the file.  A linked list of lines. */
-   const char * filename;     /**< Full pathname - e.g. "/etc/privoxy/wibble.action". */
-   unsigned identifier;       /**< The file name's position in csp->config->actions_file[]. */
-   const char * version_str;  /**< Last modification time, as a string.  For CGI param. */
-                              /**< Can be used in URL without using url_param(). */
-   unsigned version;          /**< Last modification time - prevents chaos with
-                                   the browser's "back" button.  Note that this is a
-                                   time_t cast to an unsigned.  When comparing, always
-                                   cast the time_t to an unsigned, and *NOT* vice-versa.
-                                   This may lose the top few bits, but they're not
-                                   significant anyway. */
-   int newline;               /**< Newline convention - one of the NEWLINE_xxx constants.
-                                   Note that changing this after the file has been
-                                   read in will cause a mess. */
-   struct file_line * parse_error; /**< On parse error, this is the offending line. */
-   const char * parse_error_text;  /**< On parse error, this is the problem.
-                                        (Statically allocated) */
-};
-
-/**
- * Information about the filter types.
- * Used for macro replacement in cgi_edit_actions_for_url.
- */
-struct filter_type_info
-{
-   const int multi_action_index; /**< The multi action index as defined in project.h */
-   const char *macro_name;       /**< Name of the macro that has to be replaced
-                                      with the prepared templates.
-                                      For example "content-filter-params" */
-   const char *type;             /**< Name of the filter type,
-                                      for example "server-header-filter". */
-   /* XXX: check if these two can be combined. */
-   const char *disable_all_option; /**< Name of the catch-all radio option that has
-                                        to be checked or unchecked for this filter type. */
-   const char *disable_all_param;  /**< Name of the parameter that causes all filters of
-                                        this type to be disabled. */
-   const char *abbr_type;        /**< Abbreviation of the filter type, usually the
-                                      first or second character capitalized */
-   const char *anchor;           /**< Anchor for the User Manual link,
-                                      for example "SERVER-HEADER-FILTER"  */
-};
-
-/* Accessed by index, keep the order in the way the FT_ macros are defined. */
-static const struct filter_type_info filter_type_info[] =
-{
-   {
-      ACTION_MULTI_FILTER,
-      "content-filter-params", "filter",
-      "filter-all", "filter_all",
-      "F", "FILTER"
-   },
-   {
-      ACTION_MULTI_CLIENT_HEADER_FILTER,
-      "client-header-filter-params", "client-header-filter",
-      "client-header-filter-all", "client_header_filter_all",
-      "C", "CLIENT-HEADER-FILTER"
-   },
-   {
-      ACTION_MULTI_SERVER_HEADER_FILTER,
-      "server-header-filter-params", "server-header-filter",
-      "server-header-filter-all", "server_header_filter_all",
-      "S", "SERVER-HEADER-FILTER"
-   },
-   {
-      ACTION_MULTI_CLIENT_HEADER_TAGGER,
-      "client-header-tagger-params", "client-header-tagger",
-      "client-header-tagger-all", "client_header_tagger_all",
-      "L", "CLIENT-HEADER-TAGGER"
-   },
-   {
-      ACTION_MULTI_SERVER_HEADER_TAGGER,
-      "server-header-tagger-params", "server-header-tagger",
-      "server-header-tagger-all", "server_header_tagger_all",
-      "E", "SERVER-HEADER-TAGGER"
-   },
-};
-
-/* FIXME: Following non-static functions should be prototyped in .h or made static */
-
-/* Functions to read and write arbitrary config files */
-jb_err edit_read_file(struct client_state *csp,
-                      const struct map *parameters,
-                      int require_version,
-                      struct editable_file **pfile);
-jb_err edit_write_file(struct editable_file * file);
-void   edit_free_file(struct editable_file * file);
-
-/* Functions to read and write actions files */
-jb_err edit_parse_actions_file(struct editable_file * file);
-jb_err edit_read_actions_file(struct client_state *csp,
-                              struct http_response *rsp,
-                              const struct map *parameters,
-                              int require_version,
-                              struct editable_file **pfile);
-
-/* Error handlers */
-jb_err cgi_error_modified(struct client_state *csp,
-                          struct http_response *rsp,
-                          const char *filename);
-jb_err cgi_error_parse(struct client_state *csp,
-                       struct http_response *rsp,
-                       struct editable_file *file);
-jb_err cgi_error_file(struct client_state *csp,
-                      struct http_response *rsp,
-                      const char *filename);
-jb_err cgi_error_file_read_only(struct client_state *csp,
-                                struct http_response *rsp,
-                                const char *filename);
-
-/* Internal arbitrary config file support functions */
-static jb_err edit_read_file_lines(FILE *fp, struct file_line ** pfile, int *newline);
-static void edit_free_file_lines(struct file_line * first_line);
-
-/* Internal actions file support functions */
-static int match_actions_file_header_line(const char * line, const char * name);
-static jb_err split_line_on_equals(const char * line, char ** pname, char ** pvalue);
-
-/* Internal parameter parsing functions */
-static jb_err get_url_spec_param(struct client_state *csp,
-                                 const struct map *parameters,
-                                 const char *name,
-                                 char **pvalue);
-
-
-/* Internal actionsfile <==> HTML conversion functions */
-static jb_err map_radio(struct map * exports,
-                        const char * optionname,
-                        const char * values,
-                        int value);
-static jb_err actions_to_radio(struct map * exports,
-                               const struct action_spec *action);
-static jb_err actions_from_radio(const struct map * parameters,
-                                 struct action_spec *action);
-
-
-static jb_err map_copy_parameter_html(struct map *out,
-                                      const struct map *in,
-                                      const char *name);
-#if 0 /* unused function */
-static jb_err map_copy_parameter_url(struct map *out,
-                                     const struct map *in,
-                                     const char *name);
-#endif /* unused function */
-
-static jb_err get_file_name_param(struct client_state *csp, 	 
-	                                   const struct map *parameters, 	 
-	                                   const char *param_name, 	 
-	                                   const char **pfilename);
-
-/* Internal convenience functions */
-static char *section_target(const unsigned sectionid);
-
-/*********************************************************************
- *
- * Function    :  section_target
- *
- * Description :  Given an unsigned (section id) n, produce a dynamically
- *                allocated string of the form #l<n>, for use in link
- *                targets.
- *
- *                XXX: The hash should be moved into the templates
- *                to make this function more generic and render
- *                stringify() obsolete.
- *
- * Parameters  :
- *          1  :  sectionid = start line number of section
- *
- * Returns     :  String with link target, or NULL if out of
- *                memory
- *
- *********************************************************************/
-static char *section_target(const unsigned sectionid)
-{
-   char buf[30];
-
-   snprintf(buf, sizeof(buf), "#l%d", sectionid);
-   return(strdup(buf));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  stringify
- *
- * Description :  Convert a number into a dynamically allocated string.
- *
- * Parameters  :
- *          1  :  number = The number to convert.
- *
- * Returns     :  String with link target, or NULL if out of memory
- *
- *********************************************************************/
-static char *stringify(const unsigned number)
-{
-   char buf[6];
-
-   snprintf(buf, sizeof(buf), "%i", number);
-   return strdup(buf);
-}
-
-
-/*********************************************************************
- *
- * Function    :  map_copy_parameter_html
- *
- * Description :  Copy a CGI parameter from one map to another, HTML
- *                encoding it.
- *
- * Parameters  :
- *          1  :  out = target map
- *          2  :  in = source map
- *          3  :  name = name of cgi parameter to copy
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the parameter doesn't exist
- *                                  in the source map
- *
- *********************************************************************/
-static jb_err map_copy_parameter_html(struct map *out,
-                                      const struct map *in,
-                                      const char *name)
-{
-   const char * value;
-   jb_err err;
-
-   assert(out);
-   assert(in);
-   assert(name);
-
-   value = lookup(in, name);
-   err = map(out, name, 1, html_encode(value), 0);
-
-   if (err)
-   {
-      /* Out of memory */
-      return err;
-   }
-   else if (*value == '\0')
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-   else
-   {
-      return JB_ERR_OK;
-   }
-}
-
-
-#if 0 /* unused function */
-/*********************************************************************
- *
- * Function    :  map_copy_parameter_url
- *
- * Description :  Copy a CGI parameter from one map to another, URL
- *                encoding it.
- *
- * Parameters  :
- *          1  :  out = target map
- *          2  :  in = source map
- *          3  :  name = name of cgi parameter to copy
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the parameter doesn't exist
- *                                  in the source map
- *
- *********************************************************************/
-static jb_err map_copy_parameter_url(struct map *out,
-                                     const struct map *in,
-                                     const char *name)
-{
-   const char * value;
-   jb_err err;
-
-   assert(out);
-   assert(in);
-   assert(name);
-
-   value = lookup(in, name);
-   err = map(out, name, 1, url_encode(value), 0);
-
-   if (err)
-   {
-      /* Out of memory */
-      return err;
-   }
-   else if (*value == '\0')
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-   else
-   {
-      return JB_ERR_OK;
-   }
-}
-#endif /* 0 - unused function */
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_url_form
- *
- * Description :  CGI function that displays a form for
- *                edit-actions-url
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters
- *           i : (action index) Identifies the file to edit
- *           v : (version) File's last-modified time
- *           p : (pattern) Line number of pattern to edit
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_url_form(struct client_state *csp,
-                                 struct http_response *rsp,
-                                 const struct map *parameters)
-{
-   struct map * exports;
-   unsigned patternid;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   unsigned section_start_line_number = 0;
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "p", &patternid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   cur_line = file->lines;
-
-   for (line_number = 1; (cur_line != NULL) && (line_number < patternid); line_number++)
-   {
-      if (cur_line->type == FILE_LINE_ACTION)
-      {
-         section_start_line_number = line_number;
-      }
-      cur_line = cur_line->next;
-   }
-
-   if ( (cur_line == NULL)
-     || (line_number != patternid)
-     || (patternid < 1U)
-     || (cur_line->type != FILE_LINE_URL))
-   {
-      /* Invalid "patternid" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, stringify(file->identifier), 0);
-   if (!err) err = map(exports, "v", 1, file->version_str, 1);
-   if (!err) err = map(exports, "p", 1, url_encode(lookup(parameters, "p")), 0);
-   if (!err) err = map(exports, "u", 1, html_encode(cur_line->unprocessed), 0);
-   if (!err) err = map(exports, "jumptarget", 1, section_target(section_start_line_number), 0);
-
-   edit_free_file(file);
-
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "edit-actions-url-form", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_add_url_form
- *
- * Description :  CGI function that displays a form for
- *                edit-actions-url
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           f : (filename) Identifies the file to edit
- *           v : (version) File's last-modified time
- *           s : (section) Line number of section to edit
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_add_url_form(struct client_state *csp,
-                                     struct http_response *rsp,
-                                     const struct map *parameters)
-{
-   struct map *exports;
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = map_copy_parameter_html(exports, parameters, "f");
-   if (!err) err = map_copy_parameter_html(exports, parameters, "v");
-   if (!err) err = map_copy_parameter_html(exports, parameters, "s");
-
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "edit-actions-add-url-form", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_remove_url_form
- *
- * Description :  CGI function that displays a form for
- *                edit-actions-url
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           f : (number)  The action file identifier.
- *           v : (version) File's last-modified time
- *           p : (pattern) Line number of pattern to edit
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_remove_url_form(struct client_state *csp,
-                                     struct http_response *rsp,
-                                     const struct map *parameters)
-{
-   struct map * exports;
-   unsigned patternid;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   unsigned section_start_line_number = 0;
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "p", &patternid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   cur_line = file->lines;
-
-   for (line_number = 1; (cur_line != NULL) && (line_number < patternid); line_number++)
-   {
-      if (cur_line->type == FILE_LINE_ACTION)
-      {
-         section_start_line_number = line_number;
-      }      
-      cur_line = cur_line->next;
-   }
-
-   if ( (cur_line == NULL)
-     || (line_number != patternid)
-     || (patternid < 1U)
-     || (cur_line->type != FILE_LINE_URL))
-   {
-      /* Invalid "patternid" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, stringify(file->identifier), 0);
-   if (!err) err = map(exports, "v", 1, file->version_str, 1);
-   if (!err) err = map(exports, "p", 1, url_encode(lookup(parameters, "p")), 0);
-   if (!err) err = map(exports, "u", 1, html_encode(cur_line->unprocessed), 0);
-   if (!err) err = map(exports, "jumptarget", 1, section_target(section_start_line_number), 0);
-   if (!err) err = map(exports, "actions-file", 1, html_encode(file->filename), 0);
-
-   edit_free_file(file);
-
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "edit-actions-remove-url-form", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_write_file
- *
- * Description :  Write a complete file to disk.
- *
- * Parameters  :
- *          1  :  file = File to write.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_FILE   on error writing to file.
- *                JB_ERR_MEMORY on out of memory
- *
- *********************************************************************/
-jb_err edit_write_file(struct editable_file * file)
-{
-   FILE * fp;
-   struct file_line * cur_line;
-   struct stat statbuf[1];
-   char version_buf[22]; /* 22 = ceil(log10(2^64)) + 2 = max number of
-                            digits in time_t, assuming this is a 64-bit
-                            machine, plus null terminator, plus one
-                            for paranoia */
-
-   assert(file);
-   assert(file->filename);
-
-   if (NULL == (fp = fopen(file->filename, "wb")))
-   {
-      return JB_ERR_FILE;
-   }
-
-   cur_line = file->lines;
-   while (cur_line != NULL)
-   {
-      if (cur_line->raw)
-      {
-         if (fputs(cur_line->raw, fp) < 0)
-         {
-            fclose(fp);
-            return JB_ERR_FILE;
-         }
-      }
-      else
-      {
-         if (cur_line->prefix)
-         {
-            if (fputs(cur_line->prefix, fp) < 0)
-            {
-               fclose(fp);
-               return JB_ERR_FILE;
-            }
-         }
-         if (cur_line->unprocessed)
-         {
-
-            if (NULL != strchr(cur_line->unprocessed, '#'))
-            {
-               /* Must quote '#' characters */
-               int numhash = 0;
-               size_t len;
-               char * src;
-               char * dest;
-               char * str;
-
-               /* Count number of # characters, so we know length of output string */
-               src = cur_line->unprocessed;
-               while (NULL != (src = strchr(src, '#')))
-               {
-                  numhash++;
-                  src++;
-               }
-               assert(numhash > 0);
-
-               /* Allocate new memory for string */
-               len = strlen(cur_line->unprocessed) + (size_t)numhash;
-               if (NULL == (str = malloc(len + 1)))
-               {
-                  /* Uh oh, just trashed file! */
-                  fclose(fp);
-                  return JB_ERR_MEMORY;
-               }
-
-               /* Copy string but quote hashes */
-               src  = cur_line->unprocessed;
-               dest = str;
-               while (*src)
-               {
-                  if (*src == '#')
-                  {
-                     *dest++ = '\\';
-                     numhash--;
-                     assert(numhash >= 0);
-                  }
-                  *dest++ = *src++;
-               }
-               *dest = '\0';
-
-               assert(numhash == 0);
-               assert(strlen(str) == len);
-               assert(str == dest - len);
-               assert(src - len <= cur_line->unprocessed);
-
-               if ((strlen(str) != len) || (numhash != 0))
-               {
-                  /*
-                   * Escaping didn't work as expected, go spread the news.
-                   * Only reached in non-debugging builds.
-                   */
-                  log_error(LOG_LEVEL_ERROR,
-                     "Looks like hash escaping failed. %s might be corrupted now.",
-                     file->filename);
-               }
-
-               if (fputs(str, fp) < 0)
-               {
-                  free(str);
-                  fclose(fp);
-                  return JB_ERR_FILE;
-               }
-
-               free(str);
-            }
-            else
-            {
-               /* Can write without quoting '#' characters. */
-               if (fputs(cur_line->unprocessed, fp) < 0)
-               {
-                  fclose(fp);
-                  return JB_ERR_FILE;
-               }
-            }
-            if (fputs(NEWLINE(file->newline), fp) < 0)
-            {
-               fclose(fp);
-               return JB_ERR_FILE;
-            }
-         }
-         else
-         {
-            /* FIXME: Write data from file->data->whatever */
-            assert(0);
-         }
-      }
-      cur_line = cur_line->next;
-   }
-
-   fclose(fp);
-
-
-   /* Update the version stamp in the file structure, since we just
-    * wrote to the file & changed it's date.
-    */
-   if (stat(file->filename, statbuf) < 0)
-   {
-      /* Error, probably file not found. */
-      return JB_ERR_FILE;
-   }
-   file->version = (unsigned)statbuf->st_mtime;
-
-   /* Correct file->version_str */
-   freez(file->version_str);
-   snprintf(version_buf, sizeof(version_buf), "%u", file->version);
-   version_buf[sizeof(version_buf)-1] = '\0';
-   file->version_str = strdup(version_buf);
-   if (version_buf == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_free_file
- *
- * Description :  Free a complete file in memory.
- *
- * Parameters  :
- *          1  :  file = Data structure to free.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void edit_free_file(struct editable_file * file)
-{
-   if (!file)
-   {
-      /* Silently ignore NULL pointer */
-      return;
-   }
-
-   edit_free_file_lines(file->lines);
-   freez(file->version_str);
-   file->version = 0;
-   file->parse_error_text = NULL; /* Statically allocated */
-   file->parse_error = NULL;
-
-   free(file);
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_free_file_lines
- *
- * Description :  Free an entire linked list of file lines.
- *
- * Parameters  :
- *          1  :  first_line = Data structure to free.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void edit_free_file_lines(struct file_line * first_line)
-{
-   struct file_line * next_line;
-
-   while (first_line != NULL)
-   {
-      next_line = first_line->next;
-      first_line->next = NULL;
-      freez(first_line->raw);
-      freez(first_line->prefix);
-      freez(first_line->unprocessed);
-      switch(first_line->type)
-      {
-         case 0: /* special case if memory zeroed */
-         case FILE_LINE_UNPROCESSED:
-         case FILE_LINE_BLANK:
-         case FILE_LINE_ALIAS_HEADER:
-         case FILE_LINE_SETTINGS_HEADER:
-         case FILE_LINE_DESCRIPTION_HEADER:
-         case FILE_LINE_DESCRIPTION_ENTRY:
-         case FILE_LINE_ALIAS_ENTRY:
-         case FILE_LINE_URL:
-            /* No data is stored for these */
-            break;
-
-         case FILE_LINE_ACTION:
-            free_action(first_line->data.action);
-            break;
-
-         case FILE_LINE_SETTINGS_ENTRY:
-            freez(first_line->data.setting.name);
-            freez(first_line->data.setting.svalue);
-            break;
-         default:
-            /* Should never happen */
-            assert(0);
-            break;
-      }
-      first_line->type = 0; /* paranoia */
-      free(first_line);
-      first_line = next_line;
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  match_actions_file_header_line
- *
- * Description :  Match an actions file {{header}} line
- *
- * Parameters  :
- *          1  :  line = String from file
- *          2  :  name = Header to match against
- *
- * Returns     :  0 iff they match.
- *
- *********************************************************************/
-static int match_actions_file_header_line(const char * line, const char * name)
-{
-   size_t len;
-
-   assert(line);
-   assert(name);
-
-   /* Look for "{{" */
-   if ((line[0] != '{') || (line[1] != '{'))
-   {
-      return 1;
-   }
-   line += 2;
-
-   /* Look for optional whitespace */
-   while ( (*line == ' ') || (*line == '\t') )
-   {
-      line++;
-   }
-
-   /* Look for the specified name (case-insensitive) */
-   len = strlen(name);
-   if (0 != strncmpic(line, name, len))
-   {
-      return 1;
-   }
-   line += len;
-
-   /* Look for optional whitespace */
-   while ( (*line == ' ') || (*line == '\t') )
-   {
-      line++;
-   }
-
-   /* Look for "}}" and end of string*/
-   if ((line[0] != '}') || (line[1] != '}') || (line[2] != '\0'))
-   {
-      return 1;
-   }
-
-   /* It matched!! */
-   return 0;
-}
-
-
-/*********************************************************************
- *
- * Function    :  match_actions_file_header_line
- *
- * Description :  Match an actions file {{header}} line
- *
- * Parameters  :
- *          1  :  line = String from file.  Must not start with
- *                       whitespace (else infinite loop!)
- *          2  :  pname = Destination for name
- *          2  :  pvalue = Destination for value
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_PARSE  if there's no "=" sign, or if there's
- *                              nothing before the "=" sign (but empty
- *                              values *after* the "=" sign are legal).
- *
- *********************************************************************/
-static jb_err split_line_on_equals(const char * line, char ** pname, char ** pvalue)
-{
-   const char * name_end;
-   const char * value_start;
-   size_t name_len;
-
-   assert(line);
-   assert(pname);
-   assert(pvalue);
-   assert(*line != ' ');
-   assert(*line != '\t');
-
-   *pname = NULL;
-   *pvalue = NULL;
-
-   value_start = strchr(line, '=');
-   if ((value_start == NULL) || (value_start == line))
-   {
-      return JB_ERR_PARSE;
-   }
-
-   name_end = value_start - 1;
-
-   /* Eat any whitespace before the '=' */
-   while ((*name_end == ' ') || (*name_end == '\t'))
-   {
-      /*
-       * we already know we must have at least 1 non-ws char
-       * at start of buf - no need to check
-       */
-      name_end--;
-   }
-
-   name_len = (size_t)(name_end - line) + 1; /* Length excluding \0 */
-   if (NULL == (*pname = (char *) malloc(name_len + 1)))
-   {
-      return JB_ERR_MEMORY;
-   }
-   strncpy(*pname, line, name_len);
-   (*pname)[name_len] = '\0';
-
-   /* Eat any the whitespace after the '=' */
-   value_start++;
-   while ((*value_start == ' ') || (*value_start == '\t'))
-   {
-      value_start++;
-   }
-
-   if (NULL == (*pvalue = strdup(value_start)))
-   {
-      free(*pname);
-      *pname = NULL;
-      return JB_ERR_MEMORY;
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_parse_actions_file
- *
- * Description :  Parse an actions file in memory.
- *
- *                Passed linked list must have the "data" member
- *                zeroed, and must contain valid "next" and
- *                "unprocessed" fields.  The "raw" and "prefix"
- *                fields are ignored, and "type" is just overwritten.
- *
- *                Note that on error the file may have been
- *                partially parsed.
- *
- * Parameters  :
- *          1  :  file = Actions file to be parsed in-place.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_PARSE  on error
- *
- *********************************************************************/
-jb_err edit_parse_actions_file(struct editable_file * file)
-{
-   struct file_line * cur_line;
-   size_t len;
-   const char * text; /* Text from a line */
-   char * name;  /* For lines of the form name=value */
-   char * value; /* For lines of the form name=value */
-   struct action_alias * alias_list = NULL;
-   jb_err err = JB_ERR_OK;
-
-   /* alias_list contains the aliases defined in this file.
-    * It might be better to use the "file_line.data" fields
-    * in the relavent places instead.
-    */
-
-   cur_line = file->lines;
-
-   /* A note about blank line support: Blank lines should only
-    * ever occur as the last line in the file.  This function
-    * is more forgiving than that - FILE_LINE_BLANK can occur
-    * anywhere.
-    */
-
-   /* Skip leading blanks.  Should only happen if file is
-    * empty (which is valid, but pointless).
-    */
-   while ( (cur_line != NULL)
-        && (cur_line->unprocessed[0] == '\0') )
-   {
-      /* Blank line */
-      cur_line->type = FILE_LINE_BLANK;
-      cur_line = cur_line->next;
-   }
-
-   if ( (cur_line != NULL)
-     && (cur_line->unprocessed[0] != '{') )
-   {
-      /* File doesn't start with a header */
-      file->parse_error = cur_line;
-      file->parse_error_text = "First (non-comment) line of the file must contain a header.";
-      return JB_ERR_PARSE;
-   }
-
-   if ( (cur_line != NULL) && (0 ==
-      match_actions_file_header_line(cur_line->unprocessed, "settings") ) )
-   {
-      cur_line->type = FILE_LINE_SETTINGS_HEADER;
-
-      cur_line = cur_line->next;
-      while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{'))
-      {
-         if (cur_line->unprocessed[0])
-         {
-            cur_line->type = FILE_LINE_SETTINGS_ENTRY;
-
-            err = split_line_on_equals(cur_line->unprocessed,
-                     &cur_line->data.setting.name,
-                     &cur_line->data.setting.svalue);
-            if (err == JB_ERR_MEMORY)
-            {
-               return err;
-            }
-            else if (err != JB_ERR_OK)
-            {
-               /* Line does not contain a name=value pair */
-               file->parse_error = cur_line;
-               file->parse_error_text = "Expected a name=value pair on this {{description}} line, but couldn't find one.";
-               return JB_ERR_PARSE;
-            }
-         }
-         else
-         {
-            cur_line->type = FILE_LINE_BLANK;
-         }
-         cur_line = cur_line->next;
-      }
-   }
-
-   if ( (cur_line != NULL) && (0 ==
-      match_actions_file_header_line(cur_line->unprocessed, "description") ) )
-   {
-      cur_line->type = FILE_LINE_DESCRIPTION_HEADER;
-
-      cur_line = cur_line->next;
-      while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{'))
-      {
-         if (cur_line->unprocessed[0])
-         {
-            cur_line->type = FILE_LINE_DESCRIPTION_ENTRY;
-         }
-         else
-         {
-            cur_line->type = FILE_LINE_BLANK;
-         }
-         cur_line = cur_line->next;
-      }
-   }
-
-   if ( (cur_line != NULL) && (0 ==
-      match_actions_file_header_line(cur_line->unprocessed, "alias") ) )
-   {
-      cur_line->type = FILE_LINE_ALIAS_HEADER;
-
-      cur_line = cur_line->next;
-      while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{'))
-      {
-         if (cur_line->unprocessed[0])
-         {
-            /* define an alias */
-            struct action_alias * new_alias;
-
-            cur_line->type = FILE_LINE_ALIAS_ENTRY;
-
-            err = split_line_on_equals(cur_line->unprocessed, &name, &value);
-            if (err == JB_ERR_MEMORY)
-            {
-               return err;
-            }
-            else if (err != JB_ERR_OK)
-            {
-               /* Line does not contain a name=value pair */
-               file->parse_error = cur_line;
-               file->parse_error_text = "Expected a name=value pair on this {{alias}} line, but couldn't find one.";
-               return JB_ERR_PARSE;
-            }
-
-            if ((new_alias = zalloc(sizeof(*new_alias))) == NULL)
-            {
-               /* Out of memory */
-               free(name);
-               free(value);
-               free_alias_list(alias_list);
-               return JB_ERR_MEMORY;
-            }
-
-            err = get_actions(value, alias_list, new_alias->action);
-            if (err)
-            {
-               /* Invalid action or out of memory */
-               free(name);
-               free(value);
-               free(new_alias);
-               free_alias_list(alias_list);
-               if (err == JB_ERR_MEMORY)
-               {
-                  return err;
-               }
-               else
-               {
-                  /* Line does not contain a name=value pair */
-                  file->parse_error = cur_line;
-                  file->parse_error_text = "This alias does not specify a valid set of actions.";
-                  return JB_ERR_PARSE;
-               }
-            }
-
-            free(value);
-
-            new_alias->name = name;
-
-            /* add to list */
-            new_alias->next = alias_list;
-            alias_list = new_alias;
-         }
-         else
-         {
-            cur_line->type = FILE_LINE_BLANK;
-         }
-         cur_line = cur_line->next;
-      }
-   }
-
-   /* Header done, process the main part of the file */
-   while (cur_line != NULL)
-   {
-      /* At this point, (cur_line->unprocessed[0] == '{') */
-      assert(cur_line->unprocessed[0] == '{');
-      text = cur_line->unprocessed + 1;
-      len = strlen(text) - 1;
-      if (text[len] != '}')
-      {
-         /* No closing } on header */
-         free_alias_list(alias_list);
-         file->parse_error = cur_line;
-         file->parse_error_text = "Headers starting with '{' must have a "
-            "closing bracket ('}').  Headers starting with two brackets ('{{') "
-            "must close with two brackets ('}}').";
-         return JB_ERR_PARSE;
-      }
-
-      if (text[0] == '{')
-      {
-         /* An invalid {{ header.  */
-         free_alias_list(alias_list);
-         file->parse_error = cur_line;
-         file->parse_error_text = "Unknown or unexpected two-bracket header.  "
-            "Please remember that the system (two-bracket) headers must "
-            "appear in the order {{settings}}, {{description}}, {{alias}}, "
-            "and must appear before any actions (one-bracket) headers.  "
-            "Also note that system headers may not be repeated.";
-         return JB_ERR_PARSE;
-      }
-
-      while ( (*text == ' ') || (*text == '\t') )
-      {
-         text++;
-         len--;
-      }
-      while ( (len > (size_t)0)
-           && ( (text[len - 1] == ' ')
-             || (text[len - 1] == '\t') ) )
-      {
-         len--;
-      }
-
-      cur_line->type = FILE_LINE_ACTION;
-
-      /* Remove {} and make copy */
-      if (NULL == (value = (char *) malloc(len + 1)))
-      {
-         /* Out of memory */
-         free_alias_list(alias_list);
-         return JB_ERR_MEMORY;
-      }
-      strncpy(value, text, len);
-      value[len] = '\0';
-
-      /* Get actions */
-      err = get_actions(value, alias_list, cur_line->data.action);
-      if (err)
-      {
-         /* Invalid action or out of memory */
-         free(value);
-         free_alias_list(alias_list);
-         if (err == JB_ERR_MEMORY)
-         {
-            return err;
-         }
-         else
-         {
-            /* Line does not contain a name=value pair */
-            file->parse_error = cur_line;
-            file->parse_error_text = "This header does not specify a valid set of actions.";
-            return JB_ERR_PARSE;
-         }
-      }
-
-      /* Done with string - it was clobbered anyway */
-      free(value);
-
-      /* Process next line */
-      cur_line = cur_line->next;
-
-      /* Loop processing URL patterns */
-      while ((cur_line != NULL) && (cur_line->unprocessed[0] != '{'))
-      {
-         if (cur_line->unprocessed[0])
-         {
-            /* Could parse URL here, but this isn't currently needed */
-
-            cur_line->type = FILE_LINE_URL;
-         }
-         else
-         {
-            cur_line->type = FILE_LINE_BLANK;
-         }
-         cur_line = cur_line->next;
-      }
-   } /* End main while(cur_line != NULL) loop */
-
-   free_alias_list(alias_list);
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_read_file_lines
- *
- * Description :  Read all the lines of a file into memory.
- *                Handles whitespace, comments and line continuation.
- *
- * Parameters  :
- *          1  :  fp = File to read from.  On return, this will be
- *                     at EOF but it will not have been closed.
- *          2  :  pfile = Destination for a linked list of file_lines.
- *                        Will be set to NULL on error.
- *          3  :  newline = How to handle newlines.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *
- *********************************************************************/
-jb_err edit_read_file_lines(FILE *fp, struct file_line ** pfile, int *newline)
-{
-   struct file_line * first_line; /* Keep for return value or to free */
-   struct file_line * cur_line;   /* Current line */
-   struct file_line * prev_line;  /* Entry with prev_line->next = cur_line */
-   jb_err rval;
-
-   assert(fp);
-   assert(pfile);
-
-   *pfile = NULL;
-
-   cur_line = first_line = zalloc(sizeof(struct file_line));
-   if (cur_line == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   cur_line->type = FILE_LINE_UNPROCESSED;
-
-   rval = edit_read_line(fp, &cur_line->raw, &cur_line->prefix, &cur_line->unprocessed, newline, NULL);
-   if (rval)
-   {
-      /* Out of memory or empty file. */
-      /* Note that empty file is not an error we propogate up */
-      free(cur_line);
-      return ((rval == JB_ERR_FILE) ? JB_ERR_OK : rval);
-   }
-
-   do
-   {
-      prev_line = cur_line;
-      cur_line = prev_line->next = zalloc(sizeof(struct file_line));
-      if (cur_line == NULL)
-      {
-         /* Out of memory */
-         edit_free_file_lines(first_line);
-         return JB_ERR_MEMORY;
-      }
-
-      cur_line->type = FILE_LINE_UNPROCESSED;
-
-      rval = edit_read_line(fp, &cur_line->raw, &cur_line->prefix, &cur_line->unprocessed, newline, NULL);
-      if ((rval != JB_ERR_OK) && (rval != JB_ERR_FILE))
-      {
-         /* Out of memory */
-         edit_free_file_lines(first_line);
-         return JB_ERR_MEMORY;
-      }
-
-   }
-   while (rval != JB_ERR_FILE);
-
-   /* EOF */
-
-   /* We allocated one too many - free it */
-   prev_line->next = NULL;
-   free(cur_line);
-
-   *pfile = first_line;
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_read_file
- *
- * Description :  Read a complete file into memory.
- *                Handles CGI parameter parsing.  If requested, also
- *                checks the file's modification timestamp.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  parameters = map of cgi parameters.
- *          3  :  require_version = true to check "ver" parameter.
- *          4  :  pfile = Destination for the file.  Will be set
- *                        to NULL on error.
- *
- * CGI Parameters :
- *           f :  The action file identifier.
- *         ver :  (Only if require_version is nonzero)
- *                Timestamp of the actions file.  If wrong, this
- *                function fails with JB_ERR_MODIFIED.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if "filename" was not specified
- *                                  or is not valid.
- *                JB_ERR_FILE   if the file cannot be opened or
- *                              contains no data
- *                JB_ERR_MODIFIED if version checking was requested and
- *                                failed - the file was modified outside
- *                                of this CGI editor instance.
- *
- *********************************************************************/
-jb_err edit_read_file(struct client_state *csp,
-                      const struct map *parameters,
-                      int require_version,
-                      struct editable_file **pfile)
-{
-   struct file_line * lines;
-   FILE * fp;
-   jb_err err;
-   const char *filename = NULL;
-   struct editable_file * file;
-   unsigned version = 0;
-   struct stat statbuf[1];
-   char version_buf[22];
-   int newline = NEWLINE_UNKNOWN;
-   unsigned i;
-
-   assert(csp);
-   assert(parameters);
-   assert(pfile);
-
-   *pfile = NULL;
-
-   err = get_number_param(csp, parameters, "f", &i);
-   if ((JB_ERR_OK == err) && (i < MAX_AF_FILES) && (NULL != csp->config->actions_file[i]))
-   {
-      filename = csp->config->actions_file[i];
-   }
-   else if (JB_ERR_CGI_PARAMS == err)
-   {
-      /*
-       * Probably an old-school URL like
-       * http://config.privoxy.org/edit-actions-list?f=default
-       */
-      err = get_file_name_param(csp, parameters, "f", &filename);
-   }
-
-   if (NULL == filename || stat(filename, statbuf) < 0)
-   {
-      /* Error, probably file not found. */
-      return JB_ERR_FILE;
-   }
-   version = (unsigned) statbuf->st_mtime;
-
-   if (require_version)
-   {
-      unsigned specified_version;
-      err = get_number_param(csp, parameters, "v", &specified_version);
-      if (err)
-      {
-         return err;
-      }
-
-      if (version != specified_version)
-      {
-         return JB_ERR_MODIFIED;
-      }
-   }
-
-   if (NULL == (fp = fopen(filename,"rb")))
-   {
-      return JB_ERR_FILE;
-   }
-
-   err = edit_read_file_lines(fp, &lines, &newline);
-
-   fclose(fp);
-
-   if (err)
-   {
-      return err;
-   }
-
-   file = (struct editable_file *) zalloc(sizeof(*file));
-   if (err)
-   {
-      edit_free_file_lines(lines);
-      return err;
-   }
-
-   file->lines = lines;
-   file->newline = newline;
-   file->filename = filename;
-   file->version = version;
-   file->identifier = i;
-
-   /* Correct file->version_str */
-   freez(file->version_str);
-   snprintf(version_buf, sizeof(version_buf), "%u", file->version);
-   version_buf[sizeof(version_buf)-1] = '\0';
-   file->version_str = strdup(version_buf);
-   if (version_buf == NULL)
-   {
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   *pfile = file;
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_read_actions_file
- *
- * Description :  Read a complete actions file into memory.
- *                Handles CGI parameter parsing.  If requested, also
- *                checks the file's modification timestamp.
- *
- *                If this function detects an error in the categories
- *                JB_ERR_FILE, JB_ERR_MODIFIED, or JB_ERR_PARSE,
- *                then it handles it by filling in the specified
- *                response structure and returning JB_ERR_FILE.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = HTTP response.  Only filled in on error.
- *          2  :  parameters = map of cgi parameters.
- *          3  :  require_version = true to check "ver" parameter.
- *          4  :  pfile = Destination for the file.  Will be set
- *                        to NULL on error.
- *
- * CGI Parameters :
- *           f :  The actions file identifier.
- *         ver :  (Only if require_version is nonzero)
- *                Timestamp of the actions file.  If wrong, this
- *                function fails with JB_ERR_MODIFIED.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if "filename" was not specified
- *                                  or is not valid.
- *                JB_ERR_FILE  if the file does not contain valid data,
- *                             or if file cannot be opened or
- *                             contains no data, or if version
- *                             checking was requested and failed.
- *
- *********************************************************************/
-jb_err edit_read_actions_file(struct client_state *csp,
-                              struct http_response *rsp,
-                              const struct map *parameters,
-                              int require_version,
-                              struct editable_file **pfile)
-{
-   jb_err err;
-   struct editable_file *file;
-   static int acceptable_failures = ACCEPTABLE_TIMESTAMP_MISMATCHES - 1;
-
-   assert(csp);
-   assert(parameters);
-   assert(pfile);
-
-   *pfile = NULL;
-
-   err = edit_read_file(csp, parameters, require_version, &file);
-   if (err)
-   {
-      /* Try to handle if possible */
-      if (err == JB_ERR_FILE)
-      {
-         err = cgi_error_file(csp, rsp, lookup(parameters, "f"));
-      }
-      else if (err == JB_ERR_MODIFIED)
-      {
-         assert(require_version);
-         err = cgi_error_modified(csp, rsp, lookup(parameters, "f"));
-         log_error(LOG_LEVEL_ERROR,
-            "Blocking CGI edit request due to modification time mismatch.");
-         if (acceptable_failures > 0)
-         {
-            log_error(LOG_LEVEL_INFO,
-               "The CGI editor will be turned off after another %d mismatche(s).",
-               acceptable_failures);
-            acceptable_failures--;
-         }
-         else
-         {
-            log_error(LOG_LEVEL_INFO,
-               "Timestamp mismatch limit reached, turning CGI editor off. "
-               "Reload the configuration file to reenable it.");
-            csp->config->feature_flags &= ~RUNTIME_FEATURE_CGI_EDIT_ACTIONS;
-         }
-      }
-      if (err == JB_ERR_OK)
-      {
-         /*
-          * Signal to higher-level CGI code that there was a problem but we
-          * handled it, they should just return JB_ERR_OK.
-          */
-         err = JB_ERR_FILE;
-      }
-      return err;
-   }
-
-   err = edit_parse_actions_file(file);
-   if (err)
-   {
-      if (err == JB_ERR_PARSE)
-      {
-         err = cgi_error_parse(csp, rsp, file);
-         if (err == JB_ERR_OK)
-         {
-            /*
-             * Signal to higher-level CGI code that there was a problem but we
-             * handled it, they should just return JB_ERR_OK.
-             */
-            err = JB_ERR_FILE;
-         }
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   *pfile = file;
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_file_name_param
- *
- * Description :  Get the name of the file to edit from the parameters
- *                passed to a CGI function using the old syntax.
- *                This function handles security checks and only
- *                accepts files that Privoxy already knows.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  parameters = map of cgi parameters
- *          3  :  param_name = The name of the parameter to read
- *          4  :  pfilename = pointer to the filename in
- *                csp->config->actions_file[] if found. Set to NULL on error.
- *
- * Returns     :  JB_ERR_OK         on success
- *                JB_ERR_MEMORY     on out-of-memory
- *                JB_ERR_CGI_PARAMS if "filename" was not specified
- *                                  or is not valid.
- *
- *********************************************************************/
-static jb_err get_file_name_param(struct client_state *csp,
-                                  const struct map *parameters,
-                                  const char *param_name,
-                                  const char **pfilename)
-{
-   const char *param;
-   const char suffix[] = ".action";
-   const char *s;
-   char *name;
-   char *fullpath;
-   char ch;
-   size_t len;
-   size_t name_size;
-   int i;
-
-   assert(csp);
-   assert(parameters);
-   assert(pfilename);
-
-   *pfilename = NULL;
-
-   param = lookup(parameters, param_name);
-   if (!*param)
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   len = strlen(param);
-   if (len >= FILENAME_MAX)
-   {
-      /* Too long. */
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /*
-    * Check every character to see if it's legal.
-    * Totally unnecessary but we do it anyway.
-    */
-   s = param;
-   while ((ch = *s++) != '\0')
-   {
-      if ( ((ch < 'A') || (ch > 'Z'))
-        && ((ch < 'a') || (ch > 'z'))
-        && ((ch < '0') || (ch > '9'))
-        && (ch != '-')
-        && (ch != '_') )
-      {
-         /* Probable hack attempt. */
-         return JB_ERR_CGI_PARAMS;
-      }
-   }
-
-   /* Append extension */
-   name_size = len + strlen(suffix) + 1;
-   name = malloc(name_size);
-   if (name == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-   strlcpy(name, param, name_size);
-   strlcat(name, suffix, name_size);
-
-   /* Prepend path */
-   fullpath = make_path(csp->config->confdir, name);
-   free(name);
-
-   if (fullpath == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   /* Check if the file is known */
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (NULL != csp->config->actions_file[i] &&
-          !strcmp(fullpath, csp->config->actions_file[i]))
-      {
-         /* Success */
-         *pfilename = csp->config->actions_file[i];
-         freez(fullpath);
-
-         return JB_ERR_OK;
-      }
-   }
-   freez(fullpath);
-
-   return JB_ERR_CGI_PARAMS;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_url_spec_param
- *
- * Description :  Get a URL pattern from the parameters
- *                passed to a CGI function.  Removes leading/trailing
- *                spaces and validates it.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  parameters = map of cgi parameters
- *          3  :  name = Name of CGI parameter to read
- *          4  :  pvalue = destination for value.  Will be malloc()'d.
- *                         Set to NULL on error.
- *
- * Returns     :  JB_ERR_OK         on success
- *                JB_ERR_MEMORY     on out-of-memory
- *                JB_ERR_CGI_PARAMS if the parameter was not specified
- *                                  or is not valid.
- *
- *********************************************************************/
-static jb_err get_url_spec_param(struct client_state *csp,
-                                 const struct map *parameters,
-                                 const char *name,
-                                 char **pvalue)
-{
-   const char *orig_param;
-   char *param;
-   char *s;
-   struct url_spec compiled[1];
-   jb_err err;
-
-   assert(csp);
-   assert(parameters);
-   assert(name);
-   assert(pvalue);
-
-   *pvalue = NULL;
-
-   orig_param = lookup(parameters, name);
-   if (!*orig_param)
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* Copy and trim whitespace */
-   param = strdup(orig_param);
-   if (param == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-   chomp(param);
-
-   /* Must be non-empty, and can't allow 1st character to be '{' */
-   if (param[0] == '\0' || param[0] == '{')
-   {
-      free(param);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* Check for embedded newlines */
-   for (s = param; *s != '\0'; s++)
-   {
-      if ((*s == '\r') || (*s == '\n'))
-      {
-         free(param);
-         return JB_ERR_CGI_PARAMS;
-      }
-   }
-
-   /* Check that regex is valid */
-   s = strdup(param);
-   if (s == NULL)
-   {
-      free(param);
-      return JB_ERR_MEMORY;
-   }
-   err = create_url_spec(compiled, s);
-   free(s);
-   if (err)
-   {
-      free(param);
-      return (err == JB_ERR_MEMORY) ? JB_ERR_MEMORY : JB_ERR_CGI_PARAMS;
-   }
-   free_url_spec(compiled);
-
-   if (param[strlen(param) - 1] == '\\')
-   {
-      /*
-       * Must protect trailing '\\' from becoming line continuation character.
-       * Two methods: 1) If it's a domain only, add a trailing '/'.
-       * 2) For path, add the do-nothing PCRE expression (?:) to the end
-       */
-      if (strchr(param, '/') == NULL)
-      {
-         err = string_append(&param, "/");
-      }
-      else
-      {
-         err = string_append(&param, "(?:)");
-      }
-      if (err)
-      {
-         return err;
-      }
-
-      /* Check that the modified regex is valid */
-      s = strdup(param);
-      if (s == NULL)
-      {
-         free(param);
-         return JB_ERR_MEMORY;
-      }
-      err = create_url_spec(compiled, s);
-      free(s);
-      if (err)
-      {
-         free(param);
-         return (err == JB_ERR_MEMORY) ? JB_ERR_MEMORY : JB_ERR_CGI_PARAMS;
-      }
-      free_url_spec(compiled);
-   }
-
-   *pvalue = param;
-   return JB_ERR_OK;
-}
-
-/*********************************************************************
- *
- * Function    :  map_radio
- *
- * Description :  Map a set of radio button values.  E.g. if you have
- *                3 radio buttons, declare them as:
- *                  <option type="radio" name="xyz" @xyz-a@>
- *                  <option type="radio" name="xyz" @xyz-b@>
- *                  <option type="radio" name="xyz" @xyz-c@>
- *                Then map one of the @xyz-?@ variables to "checked"
- *                and all the others to empty by calling:
- *                map_radio(exports, "xyz", "abc", sel)
- *                Where 'sel' is 'a', 'b', or 'c'.
- *
- * Parameters  :
- *          1  :  exports = Exports map to modify.
- *          2  :  optionname = name for map
- *          3  :  values = null-terminated list of values;
- *          4  :  value = Selected value.
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *
- *********************************************************************/
-static jb_err map_radio(struct map * exports,
-                        const char * optionname,
-                        const char * values,
-                        int value)
-{
-   char * buf;
-   char * p;
-   char c;
-   const size_t len = strlen(optionname);
-   const size_t buf_size = len + 3;
-
-   assert(exports);
-   assert(optionname);
-   assert(values);
-
-   buf = malloc(buf_size);
-   if (buf == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   strlcpy(buf, optionname, buf_size);
-
-   /* XXX: this looks ... interesting */
-   p = buf + len;
-   *p++ = '-';
-   p[1] = '\0';
-
-   while ((c = *values++) != '\0')
-   {
-      if (c != value)
-      {
-         *p = c;
-         if (map(exports, buf, 1, "", 1))
-         {
-            return JB_ERR_MEMORY;
-         }
-      }
-   }
-
-   *p = (char)value;
-   return map(exports, buf, 0, "checked", 1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_modified
- *
- * Description :  CGI function that is called when a file is modified
- *                outside the CGI editor.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  filename = The file that was modified.
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err cgi_error_modified(struct client_state *csp,
-                          struct http_response *rsp,
-                          const char *filename)
-{
-   struct map *exports;
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(filename);
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, html_encode(filename), 0);
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-modified", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_parse
- *
- * Description :  CGI function that is called when a file cannot
- *                be parsed by the CGI editor.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  file = The file that was modified.
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err cgi_error_parse(struct client_state *csp,
-                       struct http_response *rsp,
-                       struct editable_file *file)
-{
-   struct map *exports;
-   jb_err err;
-   struct file_line *cur_line;
-
-   assert(csp);
-   assert(rsp);
-   assert(file);
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, stringify(file->identifier), 0);
-   if (!err) err = map(exports, "parse-error", 1, html_encode(file->parse_error_text), 0);
-
-   cur_line = file->parse_error;
-   assert(cur_line);
-
-   if (!err) err = map(exports, "line-raw", 1, html_encode(cur_line->raw), 0);
-   if (!err) err = map(exports, "line-data", 1, html_encode(cur_line->unprocessed), 0);
-
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-parse", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_file
- *
- * Description :  CGI function that is called when a file cannot be
- *                opened by the CGI editor.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  filename = The file that was modified.
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err cgi_error_file(struct client_state *csp,
-                      struct http_response *rsp,
-                      const char *filename)
-{
-   struct map *exports;
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(filename);
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, html_encode(filename), 0);
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-file", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_file_read_only
- *
- * Description :  CGI function that is called when a file cannot be
- *                opened for writing by the CGI editor.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  filename = The file that we can't write to
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err cgi_error_file_read_only(struct client_state *csp,
-                                struct http_response *rsp,
-                                const char *filename)
-{
-   struct map *exports;
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(filename);
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, html_encode(filename), 0);
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-file-read-only", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions
- *
- * Description :  CGI function that allows the user to choose which
- *                actions file to edit.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error
- *
- *********************************************************************/
-jb_err cgi_edit_actions(struct client_state *csp,
-                        struct http_response *rsp,
-                        const struct map *parameters)
-{
-   (void)parameters;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   /* FIXME: Incomplete */
-
-   return cgi_redirect(rsp, CGI_PREFIX "edit-actions-list?f=default");
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_list
- *
- * Description :  CGI function that edits the actions list.
- *                FIXME: This function shouldn't FATAL ever.
- *                FIXME: This function doesn't check the retval of map()
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : filename
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_FILE   if the file cannot be opened or
- *                              contains no data
- *                JB_ERR_CGI_PARAMS if "filename" was not specified
- *                                  or is not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_list(struct client_state *csp,
-                             struct http_response *rsp,
-                             const struct map *parameters)
-{
-   char * section_template;
-   char * url_template;
-   char * sections;
-   char * urls;
-   char buf[150];
-   char * s;
-   struct map * exports;
-   struct map * section_exports;
-   struct map * url_exports;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number = 0;
-   unsigned prev_section_line_number = ((unsigned) (-1));
-   int i, url_1_2;
-   struct file_list * fl;
-   struct url_actions * b;
-   char * buttons = NULL;
-   jb_err err;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   /* Load actions file */
-   err = edit_read_actions_file(csp, rsp, parameters, 0, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, or out of memory. */
-      free_map(exports);
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   /* Find start of actions in file */
-   cur_line = file->lines;
-   line_number = 1;
-   while ((cur_line != NULL) && (cur_line->type != FILE_LINE_ACTION))
-   {
-      cur_line = cur_line->next;
-      line_number++;
-   }
-
-   /*
-    * Conventional actions files should have a match all block
-    * at the start:
-    * cur_line             = {...global actions...}
-    * cur_line->next       = /
-    * cur_line->next->next = {...actions...} or EOF
-    */
-   if ( (cur_line != NULL)
-     && (cur_line->type == FILE_LINE_ACTION)
-     && (cur_line->next != NULL)
-     && (cur_line->next->type == FILE_LINE_URL)
-     && (0 == strcmp(cur_line->next->unprocessed, "/"))
-     && ( (cur_line->next->next == NULL)
-       || (cur_line->next->next->type != FILE_LINE_URL)
-      ) )
-   {
-      /*
-       * Generate string with buttons to set actions for "/" to
-       * any predefined set of actions (named standard.*, probably
-       * residing in standard.action).
-       */
-
-      err = template_load(csp, &section_template, "edit-actions-list-button", 0);
-      if (err)
-      {
-         edit_free_file(file);
-         free_map(exports);
-         if (err == JB_ERR_FILE)
-         {
-            return cgi_error_no_template(csp, rsp, "edit-actions-list-button");
-         }
-         return err;
-      }
-
-      err = template_fill(&section_template, exports);
-      if (err)
-      {
-         edit_free_file(file);
-         free_map(exports);
-         return err;
-      }
-
-      buttons = strdup("");
-      for (i = 0; i < MAX_AF_FILES; i++)
-      {
-         if (((fl = csp->actions_list[i]) != NULL) && ((b = fl->f) != NULL))
-         {
-            for (b = b->next; NULL != b; b = b->next)
-            {
-               if (!strncmp(b->url->spec, "standard.", 9) && *(b->url->spec + 9) != '\0')
-               {
-                  if (err || (NULL == (section_exports = new_map())))
-                  {
-                     freez(buttons);
-                     free(section_template);
-                     edit_free_file(file);
-                     free_map(exports);
-                     return JB_ERR_MEMORY;
-                  }
-
-                  err = map(section_exports, "button-name", 1, b->url->spec + 9, 1);
-
-                  if (err || (NULL == (s = strdup(section_template))))
-                  {
-                     free_map(section_exports);
-                     freez(buttons);
-                     free(section_template);
-                     edit_free_file(file);
-                     free_map(exports);
-                     return JB_ERR_MEMORY;
-                  }
-
-                  if (!err) err = template_fill(&s, section_exports);
-                  free_map(section_exports);
-                  if (!err) err = string_join(&buttons, s);
-               }
-            }
-         }
-      }
-      freez(section_template);
-      if (!err) err = map(exports, "all-urls-buttons", 1, buttons, 0);
-
-      /*
-       * Conventional actions file, supply extra editing help.
-       * (e.g. don't allow them to make it an unconventional one).
-       */
-      if (!err) err = map_conditional(exports, "all-urls-present", 1);
-
-      snprintf(buf, sizeof(buf), "%d", line_number);
-      if (!err) err = map(exports, "all-urls-s", 1, buf, 1);
-      snprintf(buf, sizeof(buf), "%d", line_number + 2);
-      if (!err) err = map(exports, "all-urls-s-next", 1, buf, 1);
-      if (!err) err = map(exports, "all-urls-actions", 1,
-                          actions_to_html(csp, cur_line->data.action), 0);
-
-       /* Skip the 2 lines */
-      cur_line = cur_line->next->next;
-      line_number += 2;
-
-      /*
-       * Note that prev_section_line_number is NOT set here.
-       * This is deliberate and not a bug.  It stops a "Move up"
-       * option appearing on the next section.  Clicking "Move
-       * up" would make the actions file unconventional, which
-       * we don't want, so we hide this option.
-       */
-   }
-   else
-   {
-      /*
-       * Non-standard actions file - does not begin with
-       * the "All URLs" section.
-       */
-      if (!err) err = map_conditional(exports, "all-urls-present", 0);
-   }
-
-   /* Set up global exports */
-
-   if (!err) err = map(exports, "actions-file", 1, html_encode(file->filename), 0);
-   if (!err) err = map(exports, "f", 1, stringify(file->identifier), 0);
-   if (!err) err = map(exports, "v", 1, file->version_str, 1);
-
-   /* Discourage private additions to default.action */
-
-   if (!err) err = map_conditional(exports, "default-action",
-                                   (strstr("default.action", file->filename) != NULL));
-   if (err)
-   {
-      edit_free_file(file);
-      free_map(exports);
-      return err;
-   }
-
-   /* Should do all global exports above this point */
-
-   /* Load templates */
-
-   err = template_load(csp, &section_template, "edit-actions-list-section", 0);
-   if (err)
-   {
-      edit_free_file(file);
-      free_map(exports);
-      if (err == JB_ERR_FILE)
-      {
-         return cgi_error_no_template(csp, rsp, "edit-actions-list-section");
-      }
-      return err;
-   }
-
-   err = template_load(csp, &url_template, "edit-actions-list-url", 0);
-   if (err)
-   {
-      free(section_template);
-      edit_free_file(file);
-      free_map(exports);
-      if (err == JB_ERR_FILE)
-      {
-         return cgi_error_no_template(csp, rsp, "edit-actions-list-url");
-      }
-      return err;
-   }
-
-   err = template_fill(&section_template, exports);
-   if (err)
-   {
-      free(url_template);
-      edit_free_file(file);
-      free_map(exports);
-      return err;
-   }
-
-   err = template_fill(&url_template, exports);
-   if (err)
-   {
-      free(section_template);
-      edit_free_file(file);
-      free_map(exports);
-      return err;
-   }
-
-   if (NULL == (sections = strdup("")))
-   {
-      free(section_template);
-      free(url_template);
-      edit_free_file(file);
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   while ((cur_line != NULL) && (cur_line->type == FILE_LINE_ACTION))
-   {
-      if (NULL == (section_exports = new_map()))
-      {
-         free(sections);
-         free(section_template);
-         free(url_template);
-         edit_free_file(file);
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-
-      snprintf(buf, sizeof(buf), "%d", line_number);
-      err = map(section_exports, "s", 1, buf, 1);
-      if (!err) err = map(section_exports, "actions", 1,
-                          actions_to_html(csp, cur_line->data.action), 0);
-
-      if ( (!err)
-        && (cur_line->next != NULL)
-        && (cur_line->next->type == FILE_LINE_URL))
-      {
-         /* This section contains at least one URL, don't allow delete */
-         err = map_block_killer(section_exports, "empty-section");
-      }
-      else
-      {
-         if (!err) err = map_block_keep(section_exports, "empty-section");
-      }
-
-      if (prev_section_line_number != ((unsigned)(-1)))
-      {
-         /* Not last section */
-         snprintf(buf, sizeof(buf), "%d", prev_section_line_number);
-         if (!err) err = map(section_exports, "s-prev", 1, buf, 1);
-         if (!err) err = map_block_keep(section_exports, "s-prev-exists");
-      }
-      else
-      {
-         /* Last section */
-         if (!err) err = map_block_killer(section_exports, "s-prev-exists");
-      }
-      prev_section_line_number = line_number;
-
-      if (err)
-      {
-         free(sections);
-         free(section_template);
-         free(url_template);
-         edit_free_file(file);
-         free_map(exports);
-         free_map(section_exports);
-         return err;
-      }
-
-      /* Should do all section-specific exports above this point */
-
-      if (NULL == (urls = strdup("")))
-      {
-         free(sections);
-         free(section_template);
-         free(url_template);
-         edit_free_file(file);
-         free_map(exports);
-         free_map(section_exports);
-         return JB_ERR_MEMORY;
-      }
-
-      url_1_2 = 2;
-
-      cur_line = cur_line->next;
-      line_number++;
-
-      while ((cur_line != NULL) && (cur_line->type == FILE_LINE_URL))
-      {
-         if (NULL == (url_exports = new_map()))
-         {
-            free(urls);
-            free(sections);
-            free(section_template);
-            free(url_template);
-            edit_free_file(file);
-            free_map(exports);
-            free_map(section_exports);
-            return JB_ERR_MEMORY;
-         }
-
-         snprintf(buf, sizeof(buf), "%d", line_number);
-         err = map(url_exports, "p", 1, buf, 1);
-
-         snprintf(buf, sizeof(buf), "%d", url_1_2);
-         if (!err) err = map(url_exports, "url-1-2", 1, buf, 1);
-
-         if (!err) err = map(url_exports, "url-html", 1,
-                             html_encode(cur_line->unprocessed), 0);
-         if (!err) err = map(url_exports, "url", 1,
-                             url_encode(cur_line->unprocessed), 0);
-
-         if (err)
-         {
-            free(urls);
-            free(sections);
-            free(section_template);
-            free(url_template);
-            edit_free_file(file);
-            free_map(exports);
-            free_map(section_exports);
-            free_map(url_exports);
-            return err;
-         }
-
-         if (NULL == (s = strdup(url_template)))
-         {
-            free(urls);
-            free(sections);
-            free(section_template);
-            free(url_template);
-            edit_free_file(file);
-            free_map(exports);
-            free_map(section_exports);
-            free_map(url_exports);
-            return JB_ERR_MEMORY;
-         }
-
-         err = template_fill(&s, section_exports);
-         if (!err) err = template_fill(&s, url_exports);
-         if (!err) err = string_append(&urls, s);
-
-         free_map(url_exports);
-         freez(s);
-
-         if (err)
-         {
-            freez(urls);
-            free(sections);
-            free(section_template);
-            free(url_template);
-            edit_free_file(file);
-            free_map(exports);
-            free_map(section_exports);
-            return err;
-         }
-
-         url_1_2 = 3 - url_1_2;
-
-         cur_line = cur_line->next;
-         line_number++;
-      }
-
-      err = map(section_exports, "urls", 1, urls, 0);
-
-      /* Could also do section-specific exports here, but it wouldn't be as fast */
-
-      snprintf(buf, sizeof(buf), "%d", line_number);
-      if (!err) err = map(section_exports, "s-next", 1, buf, 1);
-
-      if ( (cur_line != NULL)
-        && (cur_line->type == FILE_LINE_ACTION))
-      {
-         /* Not last section */
-         if (!err) err = map_block_keep(section_exports, "s-next-exists");
-      }
-      else
-      {
-         /* Last section */
-         if (!err) err = map_block_killer(section_exports, "s-next-exists");
-      }
-
-      if (err)
-      {
-         free(sections);
-         free(section_template);
-         free(url_template);
-         edit_free_file(file);
-         free_map(exports);
-         free_map(section_exports);
-         return err;
-      }
-
-      if (NULL == (s = strdup(section_template)))
-      {
-         free(sections);
-         free(section_template);
-         free(url_template);
-         edit_free_file(file);
-         free_map(exports);
-         free_map(section_exports);
-         return JB_ERR_MEMORY;
-      }
-
-      err = template_fill(&s, section_exports);
-      if (!err) err = string_append(&sections, s);
-
-      freez(s);
-      free_map(section_exports);
-
-      if (err)
-      {
-         freez(sections);
-         free(section_template);
-         free(url_template);
-         edit_free_file(file);
-         free_map(exports);
-         return err;
-      }
-   }
-
-   edit_free_file(file);
-   free(section_template);
-   free(url_template);
-
-   err = map(exports, "sections", 1, sections, 0);
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   /* Could also do global exports here, but it wouldn't be as fast */
-
-   return template_fill_for_cgi(csp, "edit-actions-list", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_for_url
- *
- * Description :  CGI function that edits the Actions list.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_for_url(struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters)
-{
-   struct map * exports;
-   unsigned sectionid;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   jb_err err;
-   struct re_filterfile_spec *filter_group;
-   int i, have_filters = 0;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "s", &sectionid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   cur_line = file->lines;
-
-   for (line_number = 1; (cur_line != NULL) && (line_number < sectionid); line_number++)
-   {
-      cur_line = cur_line->next;
-   }
-
-   if ( (cur_line == NULL)
-     || (line_number != sectionid)
-     || (sectionid < 1)
-     || (cur_line->type != FILE_LINE_ACTION))
-   {
-      /* Invalid "sectionid" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   err = map(exports, "f", 1, stringify(file->identifier), 0);
-   if (!err) err = map(exports, "v", 1, file->version_str, 1);
-   if (!err) err = map(exports, "s", 1, url_encode(lookup(parameters, "s")), 0);
-
-   if (!err) err = actions_to_radio(exports, cur_line->data.action);
-
-   /*
-    * XXX: Some browsers (at least IE6 and IE7) have an artifical URL
-    * length limitation and ignore clicks on the Submit buttons if
-    * the resulting GET URL would be longer than their limit.
-    *
-    * In Privoxy 3.0.5 beta the standard edit-actions-for-url template
-    * reached this limit and action editing stopped working in these
-    * browsers (BR #1570678).
-    *
-    * The config option split-large-forms works around this browser
-    * bug (HTTP has no URL lenght limitation) by deviding the action
-    * list form into multiple smaller ones. It means the URLs are shorter
-    * and work in broken browsers as well, but the user can no longer change
-    * all actions with one submit.
-    *
-    * A better solution would be to switch to POST requests,
-    * but this will do for now.
-    */
-   if(!err && (csp->config->feature_flags & RUNTIME_FEATURE_SPLIT_LARGE_FORMS))
-   {
-      /* Generate multiple smaller form by killing the big one. */
-      err = map_block_killer(exports, "one-form-only");
-   }
-   else
-   {
-      /* Default: Generate one large form by killing the smaller ones. */
-      err = map_block_killer(exports, "multiple-forms");
-   }
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if ((csp->rlist[i] != NULL) && (csp->rlist[i]->f != NULL))
-      {
-         if (!err) err = map_conditional(exports, "any-filters-defined", 1);
-         have_filters = 1;
-         break;
-      }
-   }
-
-   if (err)
-   {
-      edit_free_file(file);
-      free_map(exports);
-      return err;
-   }
-
-   if (0 == have_filters)
-   {
-      err = map(exports, "filter-params", 1, "", 1);
-   }
-   else
-   {
-      /*
-       * List available filters and their settings.
-       */
-      char *filter_template;
-      int filter_identifier = 0;
-      char *prepared_templates[MAX_FILTER_TYPES];
-
-      for (i = 0; i < MAX_FILTER_TYPES; i++)
-      {
-         prepared_templates[i] = strdup("");
-      }
-
-      err = template_load(csp, &filter_template, "edit-actions-for-url-filter", 0);
-      if (err)
-      {
-         edit_free_file(file);
-         free_map(exports);
-         if (err == JB_ERR_FILE)
-         {
-            return cgi_error_no_template(csp, rsp, "edit-actions-for-url-filter");
-         }
-         return err;
-      }
-
-      err = template_fill(&filter_template, exports);
-
-      for (i = 0; i < MAX_AF_FILES; i++)
-      {
-         if ((csp->rlist[i] != NULL) && (csp->rlist[i]->f != NULL))
-         {
-            filter_group = csp->rlist[i]->f;
-            for (;(!err) && (filter_group != NULL); filter_group = filter_group->next)
-            {
-               char current_mode = 'x';
-               char number[20];
-               struct list_entry *filter_name;
-               struct map *line_exports;
-               const int type = filter_group->type;
-               const int multi_action_index = filter_type_info[type].multi_action_index;
-
-               assert(type < MAX_FILTER_TYPES);
-
-               filter_name = cur_line->data.action->multi_add[multi_action_index]->first;
-               while ((filter_name != NULL)
-                   && (0 != strcmp(filter_group->name, filter_name->str)))
-               {
-                    filter_name = filter_name->next;
-               }
-
-               if (filter_name != NULL)
-               {
-                  current_mode = 'y';
-               }
-               else
-               {
-                  filter_name = cur_line->data.action->multi_remove[multi_action_index]->first;
-                  while ((filter_name != NULL)
-                      && (0 != strcmp(filter_group->name, filter_name->str)))
-                  {
-                       filter_name = filter_name->next;
-                  }
-                  if (filter_name != NULL)
-                  {
-                     current_mode = 'n';
-                  }
-               }
-
-               /* Generate a unique serial number */
-               snprintf(number, sizeof(number), "%x", filter_identifier++);
-               number[sizeof(number) - 1] = '\0';
-
-               line_exports = new_map();
-               if (line_exports == NULL)
-               {
-                  err = JB_ERR_MEMORY;
-               }
-               else
-               {
-                  char *filter_line;
-
-                  if (!err) err = map(line_exports, "index", 1, number, 1);
-                  if (!err) err = map(line_exports, "name",  1, filter_group->name, 1);
-                  if (!err) err = map(line_exports, "description",  1, filter_group->description, 1);
-                  if (!err) err = map_radio(line_exports, "this-filter", "ynx", current_mode);
-                  if (!err) err = map(line_exports, "filter-type", 1, filter_type_info[type].type, 1);
-                  if (!err) err = map(line_exports, "abbr-filter-type", 1, filter_type_info[type].abbr_type, 1);
-                  if (!err) err = map(line_exports, "anchor", 1, filter_type_info[type].anchor, 1);
-
-                  if (!err)
-                  {
-                     filter_line = strdup(filter_template);
-                     if (filter_line == NULL) err = JB_ERR_MEMORY;
-                  }
-                  if (!err) err = template_fill(&filter_line, line_exports);
-                  string_join(&prepared_templates[type], filter_line);
-
-                  free_map(line_exports);
-               }
-            }
-         }
-      }
-      freez(filter_template);
-
-      /* Replace all filter macros with the aggregated templates */
-      for (i = 0; i < MAX_FILTER_TYPES; i++)
-      {
-         if (err) break;
-         err = map(exports, filter_type_info[i].macro_name, 1, prepared_templates[i], 0);
-      }
-
-      if (err)
-      {
-         /* Free aggregated templates */
-         for (i = 0; i < MAX_FILTER_TYPES; i++)
-         {
-            freez(prepared_templates[i]);
-         }
-      }
-   }
-
-   /* Check or uncheck the "disable all of this type" radio buttons. */
-   for (i = 0; i < MAX_FILTER_TYPES; i++)
-   {
-      const int a = filter_type_info[i].multi_action_index;
-      const int disable_all = cur_line->data.action->multi_remove_all[a];
-      if (err) break;
-      err = map_radio(exports, filter_type_info[i].disable_all_option, "nx", (disable_all ? 'n' : 'x'));
-   }
-
-   edit_free_file(file);
-
-   if (err)
-   {
-      free_map(exports);
-      return err;
-   }
-
-   return template_fill_for_cgi(csp, "edit-actions-for-url", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_submit
- *
- * Description :  CGI function that actually edits the Actions list.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_submit(struct client_state *csp,
-                               struct http_response *rsp,
-                               const struct map *parameters)
-{
-   unsigned sectionid;
-   char * actiontext;
-   char * newtext;
-   size_t newtext_size;
-   size_t len;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   char target[1024];
-   jb_err err;
-   int filter_identifier;
-   int i;
-   const char * action_set_name;
-   struct file_list * fl;
-   struct url_actions * b;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "s", &sectionid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   cur_line = file->lines;
-
-   for (line_number = 1; (cur_line != NULL) && (line_number < sectionid); line_number++)
-   {
-      cur_line = cur_line->next;
-   }
-
-   if ( (cur_line == NULL)
-     || (line_number != sectionid)
-     || (sectionid < 1)
-     || (cur_line->type != FILE_LINE_ACTION))
-   {
-      /* Invalid "sectionid" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   get_string_param(parameters, "p", &action_set_name);
-   if (action_set_name != NULL)
-   {
-      for (filter_identifier = 0; filter_identifier < MAX_AF_FILES; filter_identifier++)
-      {
-         if (((fl = csp->actions_list[filter_identifier]) != NULL) && ((b = fl->f) != NULL))
-         {
-            for (b = b->next; NULL != b; b = b->next)
-            {
-               if (!strncmp(b->url->spec, "standard.", 9) && !strcmp(b->url->spec + 9, action_set_name))
-               {
-                  copy_action(cur_line->data.action, b->action);
-                  goto found;
-               }
-            }
-         }
-      }
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-
-      found: ;
-   }
-   else
-   {
-      err = actions_from_radio(parameters, cur_line->data.action);
-   }
-
-   if (err)
-   {
-      /* Out of memory */
-      edit_free_file(file);
-      return err;
-   }
-
-   /* Check the "disable all of this type" parameters. */
-   for (i = 0; i < MAX_FILTER_TYPES; i++)
-   {
-      const int multi_action_index = filter_type_info[i].multi_action_index;
-      const char ch = get_char_param(parameters, filter_type_info[i].disable_all_param);
-
-      if (ch == 'N')
-      {
-         list_remove_all(cur_line->data.action->multi_add[multi_action_index]);
-         list_remove_all(cur_line->data.action->multi_remove[multi_action_index]);
-         cur_line->data.action->multi_remove_all[multi_action_index] = 1;
-      }
-      else if (ch == 'X')
-      {
-         cur_line->data.action->multi_remove_all[multi_action_index] = 0;
-      }
-   }
-
-   for (filter_identifier = 0; !err; filter_identifier++)
-   {
-      char key_value[30];
-      char key_name[30];
-      char key_type[30];
-      const char *name;
-      char value; /*
-                   * Filter state. Valid states are: 'Y' (active),
-                   * 'N' (inactive) and 'X' (no change).
-                   * XXX: bad name.
-                   */
-      char type;  /*
-                   * Abbreviated filter type. Valid types are: 'F' (content filter),
-                   * 'S' (server-header filter) and 'C' (client-header filter).
-                   */
-      int multi_action_index = 0;
-
-      /* Generate the keys */
-      snprintf(key_value, sizeof(key_value), "filter_r%x", filter_identifier);
-      key_value[sizeof(key_value) - 1] = '\0'; /* XXX: Why? */
-      snprintf(key_name, sizeof(key_name), "filter_n%x", filter_identifier);
-      key_name[sizeof(key_name) - 1] = '\0'; /* XXX: Why? */
-      snprintf(key_type, sizeof(key_type), "filter_t%x", filter_identifier);
-
-      err = get_string_param(parameters, key_name, &name);
-      if (err) break;
-
-      if (name == NULL)
-      {
-         /* End of list */
-         break;
-      }
-
-      type = get_char_param(parameters, key_type);
-      switch (type)
-      {
-         case 'F':
-            multi_action_index = ACTION_MULTI_FILTER;
-            break;
-         case 'S':
-            multi_action_index = ACTION_MULTI_SERVER_HEADER_FILTER;
-            break;
-         case 'C':
-            multi_action_index = ACTION_MULTI_CLIENT_HEADER_FILTER;
-            break;
-         case 'L':
-            multi_action_index = ACTION_MULTI_CLIENT_HEADER_TAGGER;
-            break;
-         case 'E':
-            multi_action_index = ACTION_MULTI_SERVER_HEADER_TAGGER;
-            break;
-         default:
-            log_error(LOG_LEVEL_ERROR,
-               "Unknown filter type: %c for filter %s. Filter ignored.", type, name);
-            continue;
-      }
-      assert(multi_action_index);
-
-      value = get_char_param(parameters, key_value);
-      if (value == 'Y')
-      {
-         list_remove_item(cur_line->data.action->multi_add[multi_action_index], name);
-         if (!err) err = enlist(cur_line->data.action->multi_add[multi_action_index], name);
-         list_remove_item(cur_line->data.action->multi_remove[multi_action_index], name);
-      }
-      else if (value == 'N')
-      {
-         list_remove_item(cur_line->data.action->multi_add[multi_action_index], name);
-         if (!cur_line->data.action->multi_remove_all[multi_action_index])
-         {
-            list_remove_item(cur_line->data.action->multi_remove[multi_action_index], name);
-            if (!err) err = enlist(cur_line->data.action->multi_remove[multi_action_index], name);
-         }
-      }
-      else if (value == 'X')
-      {
-         list_remove_item(cur_line->data.action->multi_add[multi_action_index], name);
-         list_remove_item(cur_line->data.action->multi_remove[multi_action_index], name);
-      }
-   }
-
-   if(err)
-   {
-      /* Out of memory */
-      edit_free_file(file);
-      return err;
-   }
-
-   if (NULL == (actiontext = actions_to_text(cur_line->data.action)))
-   {
-      /* Out of memory */
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   len = strlen(actiontext);
-   if (len == 0)
-   {
-      /*
-       * Empty action - must special-case this.
-       * Simply setting len to 1 is sufficient...
-       */
-      len = 1;
-   }
-
-   newtext_size = len + 2;
-   if (NULL == (newtext = malloc(newtext_size)))
-   {
-      /* Out of memory */
-      free(actiontext);
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-   strlcpy(newtext, actiontext, newtext_size);
-   free(actiontext);
-   newtext[0]       = '{';
-   newtext[len]     = '}';
-   newtext[len + 1] = '\0';
-
-   freez(cur_line->raw);
-   freez(cur_line->unprocessed);
-   cur_line->unprocessed = newtext;
-
-   err = edit_write_file(file);
-   if (err)
-   {
-      /* Error writing file */
-      if (err == JB_ERR_FILE)
-      {
-         /* Read-only file. */
-         err = cgi_error_file_read_only(csp, rsp, file->filename);
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d",
-            (long) time(NULL), file->identifier, sectionid);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_url
- *
- * Description :  CGI function that actually edits a URL pattern in
- *                an actions file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *    filename : Identifies the file to edit
- *         ver : File's last-modified time
- *     section : Line number of section to edit
- *     pattern : Line number of pattern to edit
- *      newval : New value for pattern
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_url(struct client_state *csp,
-                            struct http_response *rsp,
-                            const struct map *parameters)
-{
-   unsigned patternid;
-   char * new_pattern;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   unsigned section_start_line_number = 0;
-   char target[1024];
-   jb_err err;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "p", &patternid);
-   if (err)
-   {
-      return err;
-   }
-   if (patternid < 1U)
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   err = get_url_spec_param(csp, parameters, "u", &new_pattern);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      free(new_pattern);
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   line_number = 1;
-   cur_line = file->lines;
-
-   while ((cur_line != NULL) && (line_number < patternid))
-   {
-      if (cur_line->type == FILE_LINE_ACTION)
-      {
-         section_start_line_number = line_number;
-      }      
-      cur_line = cur_line->next;
-      line_number++;
-   }
-
-   if ( (cur_line == NULL)
-     || (cur_line->type != FILE_LINE_URL))
-   {
-      /* Invalid "patternid" parameter */
-      free(new_pattern);
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* At this point, the line to edit is in cur_line */
-
-   freez(cur_line->raw);
-   freez(cur_line->unprocessed);
-   cur_line->unprocessed = new_pattern;
-
-   err = edit_write_file(file);
-   if (err)
-   {
-      /* Error writing file */
-      if (err == JB_ERR_FILE)
-      {
-         /* Read-only file. */
-         err = cgi_error_file_read_only(csp, rsp, file->filename);
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d",
-            (long) time(NULL), file->identifier, section_start_line_number);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_add_url
- *
- * Description :  CGI function that actually adds a URL pattern to
- *                an actions file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *    filename : Identifies the file to edit
- *         ver : File's last-modified time
- *     section : Line number of section to edit
- *      newval : New pattern
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_add_url(struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters)
-{
-   unsigned sectionid;
-   char * new_pattern;
-   struct file_line * new_line;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   char target[1024];
-   jb_err err;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "s", &sectionid);
-   if (err)
-   {
-      return err;
-   }
-   if (sectionid < 1U)
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   err = get_url_spec_param(csp, parameters, "u", &new_pattern);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      free(new_pattern);
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   line_number = 1;
-   cur_line = file->lines;
-
-   while ((cur_line != NULL) && (line_number < sectionid))
-   {
-      cur_line = cur_line->next;
-      line_number++;
-   }
-
-   if ( (cur_line == NULL)
-     || (cur_line->type != FILE_LINE_ACTION))
-   {
-      /* Invalid "sectionid" parameter */
-      free(new_pattern);
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* At this point, the section header is in cur_line - add after this. */
-
-   /* Allocate the new line */
-   new_line = (struct file_line *)zalloc(sizeof(*new_line));
-   if (new_line == NULL)
-   {
-      free(new_pattern);
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   /* Fill in the data members of the new line */
-   new_line->raw = NULL;
-   new_line->prefix = NULL;
-   new_line->unprocessed = new_pattern;
-   new_line->type = FILE_LINE_URL;
-
-   /* Link new_line into the list, after cur_line */
-   new_line->next = cur_line->next;
-   cur_line->next = new_line;
-
-   /* Done making changes, now commit */
-
-   err = edit_write_file(file);
-   if (err)
-   {
-      /* Error writing file */
-      if (err == JB_ERR_FILE)
-      {
-         /* Read-only file. */
-         err = cgi_error_file_read_only(csp, rsp, file->filename);
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d",
-            (long) time(NULL), file->identifier, sectionid);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_remove_url
- *
- * Description :  CGI function that actually removes a URL pattern from
- *                the actions file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           f : (filename) Identifies the file to edit
- *           v : (version) File's last-modified time
- *           p : (pattern) Line number of pattern to remove
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_remove_url(struct client_state *csp,
-                                   struct http_response *rsp,
-                                   const struct map *parameters)
-{
-   unsigned patternid;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   struct file_line * prev_line;
-   unsigned line_number;
-   unsigned section_start_line_number = 0;
-   char target[1024];
-   jb_err err;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "p", &patternid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   line_number = 1;
-   prev_line = NULL;
-   cur_line = file->lines;
-
-   while ((cur_line != NULL) && (line_number < patternid))
-   {
-      if (cur_line->type == FILE_LINE_ACTION)
-      {
-         section_start_line_number = line_number;
-      }
-      prev_line = cur_line;
-      cur_line = cur_line->next;
-      line_number++;
-   }
-
-   if ( (cur_line == NULL)
-     || (prev_line == NULL)
-     || (cur_line->type != FILE_LINE_URL))
-   {
-      /* Invalid "patternid" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* At this point, the line to remove is in cur_line, and the previous
-    * one is in prev_line
-    */
-
-   /* Unlink cur_line */
-   prev_line->next = cur_line->next;
-   cur_line->next = NULL;
-
-   /* Free cur_line */
-   edit_free_file_lines(cur_line);
-
-   err = edit_write_file(file);
-   if (err)
-   {
-      /* Error writing file */
-      if (err == JB_ERR_FILE)
-      {
-         /* Read-only file. */
-         err = cgi_error_file_read_only(csp, rsp, file->filename);
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i#l%d",
-            (long) time(NULL), file->identifier, section_start_line_number);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_section_remove
- *
- * Description :  CGI function that actually removes a whole section from
- *                the actions file.  The section must be empty first
- *                (else JB_ERR_CGI_PARAMS).
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           f : (filename) Identifies the file to edit
- *           v : (version) File's last-modified time
- *           s : (section) Line number of section to edit
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_section_remove(struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters)
-{
-   unsigned sectionid;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   struct file_line * prev_line;
-   unsigned line_number;
-   char target[1024];
-   jb_err err;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "s", &sectionid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   line_number = 1;
-   cur_line = file->lines;
-
-   prev_line = NULL;
-   while ((cur_line != NULL) && (line_number < sectionid))
-   {
-      prev_line = cur_line;
-      cur_line = cur_line->next;
-      line_number++;
-   }
-
-   if ( (cur_line == NULL)
-     || (cur_line->type != FILE_LINE_ACTION) )
-   {
-      /* Invalid "sectionid" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   if ( (cur_line->next != NULL)
-     && (cur_line->next->type == FILE_LINE_URL) )
-   {
-      /* Section not empty. */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* At this point, the line to remove is in cur_line, and the previous
-    * one is in prev_line
-    */
-
-   /* Unlink cur_line */
-   if (prev_line == NULL)
-   {
-      /* Removing the first line from the file */
-      file->lines = cur_line->next;
-   }
-   else
-   {
-      prev_line->next = cur_line->next;
-   }
-   cur_line->next = NULL;
-
-   /* Free cur_line */
-   edit_free_file_lines(cur_line);
-
-   err = edit_write_file(file);
-   if (err)
-   {
-      /* Error writing file */
-      if (err == JB_ERR_FILE)
-      {
-         /* Read-only file. */
-         err = cgi_error_file_read_only(csp, rsp, file->filename);
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i",
-            (long) time(NULL), file->identifier);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_section_add
- *
- * Description :  CGI function that adds a new empty section to
- *                an actions file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           f : (filename) Identifies the file to edit
- *           v : (version) File's last-modified time
- *           s : (section) Line number of section to add after, 0 for
- *               start of file.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_section_add(struct client_state *csp,
-                                    struct http_response *rsp,
-                                    const struct map *parameters)
-{
-   unsigned sectionid;
-   struct file_line * new_line;
-   char * new_text;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   unsigned line_number;
-   char target[1024];
-   jb_err err;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "s", &sectionid);
-   if (err)
-   {
-      return err;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   line_number = 1;
-   cur_line = file->lines;
-
-   if (sectionid <= 1U)
-   {
-      /* Add to start of file */
-      if (cur_line != NULL && cur_line->type != FILE_LINE_ACTION)
-      {
-         /* There's something in the file, find the line before the first
-          * action.
-          */
-         while ( (cur_line->next != NULL)
-              && (cur_line->next->type != FILE_LINE_ACTION) )
-         {
-            cur_line = cur_line->next;
-            line_number++;
-         }
-      }
-      else
-      {
-         /* File starts with action line, so insert at top */
-         cur_line = NULL;
-      }
-   }
-   else
-   {
-      /* Add after stated section. */
-      while ((cur_line != NULL) && (line_number < sectionid))
-      {
-         cur_line = cur_line->next;
-         line_number++;
-      }
-
-      if ( (cur_line == NULL)
-        || (cur_line->type != FILE_LINE_ACTION))
-      {
-         /* Invalid "sectionid" parameter */
-         edit_free_file(file);
-         return JB_ERR_CGI_PARAMS;
-      }
-
-      /* Skip through the section to find the last line in it. */
-      while ( (cur_line->next != NULL)
-           && (cur_line->next->type != FILE_LINE_ACTION) )
-      {
-         cur_line = cur_line->next;
-         line_number++;
-      }
-   }
-
-   /* At this point, the last line in the previous section is in cur_line
-    * - add after this.  (Or if we need to add as the first line, cur_line
-    * will be NULL).
-    */
-
-   new_text = strdup("{}");
-   if (NULL == new_text)
-   {
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   /* Allocate the new line */
-   new_line = (struct file_line *)zalloc(sizeof(*new_line));
-   if (new_line == NULL)
-   {
-      free(new_text);
-      edit_free_file(file);
-      return JB_ERR_MEMORY;
-   }
-
-   /* Fill in the data members of the new line */
-   new_line->raw = NULL;
-   new_line->prefix = NULL;
-   new_line->unprocessed = new_text;
-   new_line->type = FILE_LINE_ACTION;
-
-   if (cur_line != NULL)
-   {
-      /* Link new_line into the list, after cur_line */
-      new_line->next = cur_line->next;
-      cur_line->next = new_line;
-   }
-   else
-   {
-      /* Link new_line into the list, as first line */
-      new_line->next = file->lines;
-      file->lines = new_line;
-   }
-
-   /* Done making changes, now commit */
-
-   err = edit_write_file(file);
-   if (err)
-   {
-      /* Error writing file */
-      if (err == JB_ERR_FILE)
-      {
-         /* Read-only file. */
-         err = cgi_error_file_read_only(csp, rsp, file->filename);
-      }
-      edit_free_file(file);
-      return err;
-   }
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i",
-            (long) time(NULL), file->identifier);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_edit_actions_section_swap
- *
- * Description :  CGI function that swaps the order of two sections
- *                in the actions file.  Note that this CGI can actually
- *                swap any two arbitrary sections, but the GUI interface
- *                currently only allows consecutive sections to be
- *                specified.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           f : (filename) Identifies the file to edit
- *           v : (version) File's last-modified time
- *          s1 : (section1) Line number of first section to swap
- *          s2 : (section2) Line number of second section to swap
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_CGI_PARAMS if the CGI parameters are not
- *                                  specified or not valid.
- *
- *********************************************************************/
-jb_err cgi_edit_actions_section_swap(struct client_state *csp,
-                                     struct http_response *rsp,
-                                     const struct map *parameters)
-{
-   unsigned section1;
-   unsigned section2;
-   struct editable_file * file;
-   struct file_line * cur_line;
-   struct file_line * prev_line;
-   struct file_line * line_before_section1;
-   struct file_line * line_start_section1;
-   struct file_line * line_end_section1;
-   struct file_line * line_after_section1;
-   struct file_line * line_before_section2;
-   struct file_line * line_start_section2;
-   struct file_line * line_end_section2;
-   struct file_line * line_after_section2;
-   unsigned line_number;
-   char target[1024];
-   jb_err err;
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   err = get_number_param(csp, parameters, "s1", &section1);
-   if (!err) err = get_number_param(csp, parameters, "s2", &section2);
-   if (err)
-   {
-      return err;
-   }
-
-   if (section1 > section2)
-   {
-      unsigned temp = section2;
-      section2 = section1;
-      section1 = temp;
-   }
-
-   err = edit_read_actions_file(csp, rsp, parameters, 1, &file);
-   if (err)
-   {
-      /* No filename specified, can't read file, modified, or out of memory. */
-      return (err == JB_ERR_FILE ? JB_ERR_OK : err);
-   }
-
-   /* Start at the beginning... */
-   line_number = 1;
-   cur_line = file->lines;
-   prev_line = NULL;
-
-   /* ... find section1 ... */
-   while ((cur_line != NULL) && (line_number < section1))
-   {
-      prev_line = cur_line;
-      cur_line = cur_line->next;
-      line_number++;
-   }
-
-   if ( (cur_line == NULL)
-     || (cur_line->type != FILE_LINE_ACTION) )
-   {
-      /* Invalid "section1" parameter */
-      edit_free_file(file);
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   /* If no-op, we've validated params and can skip the rest. */
-   if (section1 != section2)
-   {
-      /* ... find the end of section1 ... */
-      line_before_section1 = prev_line;
-      line_start_section1 = cur_line;
-      do
-      {
-         prev_line = cur_line;
-         cur_line = cur_line->next;
-         line_number++;
-      }
-      while ((cur_line != NULL) && (cur_line->type == FILE_LINE_URL));
-      line_end_section1 = prev_line;
-      line_after_section1 = cur_line;
-
-      /* ... find section2 ... */
-      while ((cur_line != NULL) && (line_number < section2))
-      {
-         prev_line = cur_line;
-         cur_line = cur_line->next;
-         line_number++;
-      }
-
-      if ( (cur_line == NULL)
-        || (cur_line->type != FILE_LINE_ACTION) )
-      {
-         /* Invalid "section2" parameter */
-         edit_free_file(file);
-         return JB_ERR_CGI_PARAMS;
-      }
-
-      /* ... find the end of section2 ... */
-      line_before_section2 = prev_line;
-      line_start_section2 = cur_line;
-      do
-      {
-         prev_line = cur_line;
-         cur_line = cur_line->next;
-         line_number++;
-      }
-      while ((cur_line != NULL) && (cur_line->type == FILE_LINE_URL));
-      line_end_section2 = prev_line;
-      line_after_section2 = cur_line;
-
-      /* Now have all the pointers we need. Do the swap. */
-
-      /* Change the pointer to section1 to point to section2 instead */
-      if (line_before_section1 == NULL)
-      {
-         file->lines = line_start_section2;
-      }
-      else
-      {
-         line_before_section1->next = line_start_section2;
-      }
-
-      if (line_before_section2 == line_end_section1)
-      {
-         /* Consecutive sections */
-         line_end_section2->next = line_start_section1;
-      }
-      else
-      {
-         line_end_section2->next = line_after_section1;
-         line_before_section2->next = line_start_section1;
-      }
-
-      /* Set the pointer from the end of section1 to the rest of the file */
-      line_end_section1->next = line_after_section2;
-
-      err = edit_write_file(file);
-      if (err)
-      {
-         /* Error writing file */
-         if (err == JB_ERR_FILE)
-         {
-            /* Read-only file. */
-            err = cgi_error_file_read_only(csp, rsp, file->filename);
-         }
-         edit_free_file(file);
-         return err;
-      }
-   } /* END if (section1 != section2) */
-
-   snprintf(target, sizeof(target), CGI_PREFIX "edit-actions-list?foo=%lu&f=%i",
-            (long) time(NULL), file->identifier);
-
-   edit_free_file(file);
-
-   return cgi_redirect(rsp, target);
-}
-
-
-/*********************************************************************
- *
- * Function    :  javascriptify
- *
- * Description :  Converts a string into a form JavaScript will like.
- *
- *                Netscape 4's JavaScript sucks - it doesn't use 
- *                "id" parameters, so you have to set the "name"
- *                used to submit a form element to something JavaScript
- *                will like.  (Or access the elements by index in an
- *                array.  That array contains >60 elements and will
- *                be changed whenever we add a new action to the
- *                editor, so I'm NOT going to use indexes that have
- *                to be figured out by hand.)
- *
- *                Currently the only thing we have to worry about
- *                is "-" ==> "_" conversion.
- *
- *                This is a length-preserving operation so it is
- *                carried out in-place, no memory is allocated
- *                or freed.
- *
- * Parameters  :
- *          1  :  identifier = String to make JavaScript-friendly.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void javascriptify(char * identifier)
-{
-   char * p = identifier;
-   while (NULL != (p = strchr(p, '-')))
-   {
-      *p++ = '_';
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  actions_to_radio
- *
- * Description :  Converts a actionsfile entry into settings for
- *                radio buttons and edit boxes on a HTML form.
- *
- * Parameters  :
- *          1  :  exports = List of substitutions to add to.
- *          2  :  action  = Action to read
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *
- *********************************************************************/
-static jb_err actions_to_radio(struct map * exports,
-                               const struct action_spec *action)
-{
-   unsigned long mask;
-   unsigned long add;
-   int mapped_param;
-   int checked;
-   char current_mode;
-
-   assert(exports);
-   assert(action);
-
-   mask = action->mask;
-   add  = action->add;
-
-   /* sanity - prevents "-feature +feature" */
-   mask |= add;
-
-
-#define DEFINE_ACTION_BOOL(name, bit)                 \
-   if (!(mask & bit))                                 \
-   {                                                  \
-      current_mode = 'n';                             \
-   }                                                  \
-   else if (add & bit)                                \
-   {                                                  \
-      current_mode = 'y';                             \
-   }                                                  \
-   else                                               \
-   {                                                  \
-      current_mode = 'x';                             \
-   }                                                  \
-   if (map_radio(exports, name, "ynx", current_mode)) \
-   {                                                  \
-      return JB_ERR_MEMORY;                           \
-   }
-
-#define DEFINE_ACTION_STRING(name, bit, index)        \
-   DEFINE_ACTION_BOOL(name, bit);                     \
-   mapped_param = 0;
-
-#define DEFINE_CGI_PARAM_RADIO(name, bit, index, value, is_default)  \
-   if (add & bit)                                                    \
-   {                                                                 \
-      checked = !strcmp(action->string[index], value);               \
-   }                                                                 \
-   else                                                              \
-   {                                                                 \
-      checked = is_default;                                          \
-   }                                                                 \
-   mapped_param |= checked;                                          \
-   if (map(exports, name "-param-" value, 1, (checked ? "checked" : ""), 1)) \
-   {                                                                 \
-      return JB_ERR_MEMORY;                                          \
-   }
-
-#define DEFINE_CGI_PARAM_CUSTOM(name, bit, index, default_val)       \
-   if (map(exports, name "-param-custom", 1,                         \
-           ((!mapped_param) ? "checked" : ""), 1))                   \
-   {                                                                 \
-      return JB_ERR_MEMORY;                                          \
-   }                                                                 \
-   if (map(exports, name "-param", 1,                                \
-           (((add & bit) && !mapped_param) ?                         \
-           action->string[index] : default_val), 1))                 \
-   {                                                                 \
-      return JB_ERR_MEMORY;                                          \
-   }
-
-#define DEFINE_CGI_PARAM_NO_RADIO(name, bit, index, default_val)     \
-   if (map(exports, name "-param", 1,                                \
-           ((add & bit) ? action->string[index] : default_val), 1))  \
-   {                                                                 \
-      return JB_ERR_MEMORY;                                          \
-   }
-
-#define DEFINE_ACTION_MULTI(name, index)              \
-   if (action->multi_add[index]->first)               \
-   {                                                  \
-      current_mode = 'y';                             \
-   }                                                  \
-   else if (action->multi_remove_all[index])          \
-   {                                                  \
-      current_mode = 'n';                             \
-   }                                                  \
-   else if (action->multi_remove[index]->first)       \
-   {                                                  \
-      current_mode = 'y';                             \
-   }                                                  \
-   else                                               \
-   {                                                  \
-      current_mode = 'x';                             \
-   }                                                  \
-   if (map_radio(exports, name, "ynx", current_mode)) \
-   {                                                  \
-      return JB_ERR_MEMORY;                           \
-   }
-
-#define DEFINE_ACTION_ALIAS 0 /* No aliases for output */
-
-#include "actionlist.h"
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-#undef DEFINE_CGI_PARAM_CUSTOM
-#undef DEFINE_CGI_PARAM_RADIO
-#undef DEFINE_CGI_PARAM_NO_RADIO
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  actions_from_radio
- *
- * Description :  Converts a map of parameters passed to a CGI function
- *                into an actionsfile entry.
- *
- * Parameters  :
- *          1  :  parameters = parameters to the CGI call
- *          2  :  action  = Action to change.  Must be valid before
- *                          the call, actions not specified will be
- *                          left unchanged.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *
- *********************************************************************/
-static jb_err actions_from_radio(const struct map * parameters,
-                                 struct action_spec *action)
-{
-   const char * param;
-   char * param_dup;
-   char ch;
-   const char * js_name;
-   jb_err err = JB_ERR_OK;
-
-   assert(parameters);
-   assert(action);
-
-   /* Statics are generally a potential race condition,
-    * but in this case we're safe and don't need semaphores.
-    * Be careful if you modify this function.
-    * - Jon
-    * The js_name_arr's are never free()d, but this is no
-    * problem, since they will only be created once and
-    * used by all threads thereafter. -oes
-    */
-
-#define JAVASCRIPTIFY(dest_var, string)               \
-   {                                                  \
-     static int first_time = 1;                       \
-     static char *js_name_arr;                        \
-      if (first_time)                                 \
-      {                                               \
-         js_name_arr = strdup(string);                \
-         javascriptify(js_name_arr);                  \
-      }                                               \
-      dest_var = js_name_arr;                         \
-      first_time = 0;                                 \
-   }                                                  \
-
-#define DEFINE_ACTION_BOOL(name, bit)                 \
-   JAVASCRIPTIFY(js_name, name);                      \
-   ch = get_char_param(parameters, js_name);          \
-   if (ch == 'Y')                                     \
-   {                                                  \
-      action->add  |= bit;                            \
-      action->mask |= bit;                            \
-   }                                                  \
-   else if (ch == 'N')                                \
-   {                                                  \
-      action->add  &= ~bit;                           \
-      action->mask &= ~bit;                           \
-   }                                                  \
-   else if (ch == 'X')                                \
-   {                                                  \
-      action->add  &= ~bit;                           \
-      action->mask |= bit;                            \
-   }                                                  \
-
-#define DEFINE_ACTION_STRING(name, bit, index)                 \
-   JAVASCRIPTIFY(js_name, name);                               \
-   ch = get_char_param(parameters, js_name);                   \
-   if (ch == 'Y')                                              \
-   {                                                           \
-      param = NULL;                                            \
-      JAVASCRIPTIFY(js_name, name "-mode");                    \
-      if (!err) err = get_string_param(parameters, js_name, &param);    \
-      if ((param == NULL) || (0 == strcmp(param, "CUSTOM")))            \
-      {                                                                 \
-         JAVASCRIPTIFY(js_name, name "-param");                         \
-         if (!err) err = get_string_param(parameters, js_name, &param); \
-      }                                                        \
-      if (param != NULL)                                       \
-      {                                                        \
-         if (NULL == (param_dup = strdup(param)))              \
-         {                                                     \
-            return JB_ERR_MEMORY;                              \
-         }                                                     \
-         freez(action->string[index]);                         \
-         action->add  |= bit;                                  \
-         action->mask |= bit;                                  \
-         action->string[index] = param_dup;                    \
-      }                                                        \
-   }                                                           \
-   else if (ch == 'N')                                         \
-   {                                                           \
-      if (action->add & bit)                                   \
-      {                                                        \
-         freez(action->string[index]);                         \
-      }                                                        \
-      action->add  &= ~bit;                                    \
-      action->mask &= ~bit;                                    \
-   }                                                           \
-   else if (ch == 'X')                                         \
-   {                                                           \
-      if (action->add & bit)                                   \
-      {                                                        \
-         freez(action->string[index]);                         \
-      }                                                        \
-      action->add  &= ~bit;                                    \
-      action->mask |= bit;                                     \
-   }                                                           \
-
-#define DEFINE_ACTION_MULTI(name, index)                       \
-   JAVASCRIPTIFY(js_name, name);                               \
-   ch = get_char_param(parameters, js_name);                   \
-   if (ch == 'Y')                                              \
-   {                                                           \
-      /* FIXME */                                              \
-   }                                                           \
-   else if (ch == 'N')                                         \
-   {                                                           \
-      list_remove_all(action->multi_add[index]);               \
-      list_remove_all(action->multi_remove[index]);            \
-      action->multi_remove_all[index] = 1;                     \
-   }                                                           \
-   else if (ch == 'X')                                         \
-   {                                                           \
-      list_remove_all(action->multi_add[index]);               \
-      list_remove_all(action->multi_remove[index]);            \
-      action->multi_remove_all[index] = 0;                     \
-   }                                                           \
-
-#define DEFINE_ACTION_ALIAS 0 /* No aliases for URL parsing */
-
-#include "actionlist.h"
-
-#undef DEFINE_ACTION_MULTI
-#undef DEFINE_ACTION_STRING
-#undef DEFINE_ACTION_BOOL
-#undef DEFINE_ACTION_ALIAS
-#undef JAVASCRIPTIFY
-
-   return err;
-}
-#endif /* def FEATURE_CGI_EDIT_ACTIONS */
-
-
-#ifdef FEATURE_TOGGLE
-/*********************************************************************
- *
- * Function    :  cgi_toggle
- *
- * Description :  CGI function that adds a new empty section to
- *                an actions file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *         set : If present, how to change toggle setting:
- *               "enable", "disable", "toggle", or none (default).
- *        mini : If present, use mini reply template.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *
- *********************************************************************/
-jb_err cgi_toggle(struct client_state *csp,
-                  struct http_response *rsp,
-                  const struct map *parameters)
-{
-   struct map *exports;
-   char mode;
-   const char *template_name;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (0 == (csp->config->feature_flags & RUNTIME_FEATURE_CGI_TOGGLE))
-   {
-      return cgi_error_disabled(csp, rsp);
-   }
-
-   mode = get_char_param(parameters, "set");
-
-   if (mode == 'E')
-   {
-      /* Enable */
-      global_toggle_state = 1;
-   }
-   else if (mode == 'D')
-   {
-      /* Disable */
-      global_toggle_state = 0;
-   }
-   else if (mode == 'T')
-   {
-      /* Toggle */
-      global_toggle_state = !global_toggle_state;
-   }
-
-   if (NULL == (exports = default_exports(csp, "toggle")))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   template_name = (get_char_param(parameters, "mini")
-                 ? "toggle-mini"
-                 : "toggle");
-
-   return template_fill_for_cgi(csp, template_name, exports, rsp);
-}
-#endif /* def FEATURE_TOGGLE */
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/cgiedit.h b/external/privoxy/cgiedit.h
deleted file mode 100644
index ceb5248..0000000
--- a/external/privoxy/cgiedit.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef CGIEDIT_H_INCLUDED
-#define CGIEDIT_H_INCLUDED
-#define CGIEDIT_H_VERSION "$Id: cgiedit.h,v 1.10 2008/08/31 15:59:03 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cgiedit.h,v $
- *
- * Purpose     :  CGI-based actionsfile editor.
- *                
- *                Functions declared include:
- * 
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cgiedit.h,v $
- *    Revision 1.10  2008/08/31 15:59:03  fabiankeil
- *    There's no reason to let remote toggling support depend
- *    on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't.
- *
- *    Revision 1.9  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.7.2.2  2004/02/17 13:30:23  oes
- *    Moved cgi_error_disabled() from cgiedit.c to
- *    cgi.c to re-enable build with --disable-editor.
- *    Fixes Bug #892744. Thanks to Matthew Fischer
- *    for spotting.
- *
- *    Revision 1.7.2.1  2002/11/28 18:15:17  oes
- *    Added cgi_error_disabled
- *
- *    Revision 1.7  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.6  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.5  2002/01/22 23:24:48  jongfoster
- *    Adding edit-actions-section-swap
- *
- *    Revision 1.4  2001/11/13 00:28:51  jongfoster
- *    Adding new CGIs for use by non-JavaScript browsers:
- *      edit-actions-url-form
- *      edit-actions-add-url-form
- *      edit-actions-remove-url-form
- *
- *    Revision 1.3  2001/10/23 21:48:19  jongfoster
- *    Cleaning up error handling in CGI functions - they now send back
- *    a HTML error page and should never cause a FATAL error.  (Fixes one
- *    potential source of "denial of service" attacks).
- *
- *    CGI actions file editor that works and is actually useful.
- *
- *    Ability to toggle JunkBuster remotely using a CGI call.
- *
- *    You can turn off both the above features in the main configuration
- *    file, e.g. if you are running a multi-user proxy.
- *
- *    Revision 1.2  2001/10/14 22:12:49  jongfoster
- *    New version of CGI-based actionsfile editor.
- *    Major changes, including:
- *    - Completely new file parser and file output routines
- *    - edit-actions CGI renamed edit-actions-for-url
- *    - All CGIs now need a filename parameter, except for...
- *    - New CGI edit-actions which doesn't need a filename,
- *      to allow you to start the editor up.
- *    - edit-actions-submit now works, and now automatically
- *      redirects you back to the main edit-actions-list handler.
- *
- *    Revision 1.1  2001/09/16 15:47:37  jongfoster
- *    First version of CGI-based edit interface.  This is very much a
- *    work-in-progress, and you can't actually use it to edit anything
- *    yet.  You must #define FEATURE_CGI_EDIT_ACTIONS for these changes
- *    to have any effect.
- *
- *
- **********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * CGI functions
- */
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-extern jb_err cgi_edit_actions        (struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters);
-extern jb_err cgi_edit_actions_for_url(struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters);
-extern jb_err cgi_edit_actions_list   (struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters);
-extern jb_err cgi_edit_actions_submit (struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters);
-extern jb_err cgi_edit_actions_url    (struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters);
-extern jb_err cgi_edit_actions_url_form(struct client_state *csp,
-                                        struct http_response *rsp,
-                                        const struct map *parameters);
-extern jb_err cgi_edit_actions_add_url(struct client_state *csp,
-                                       struct http_response *rsp,
-                                       const struct map *parameters);
-extern jb_err cgi_edit_actions_add_url_form(struct client_state *csp,
-                                            struct http_response *rsp,
-                                            const struct map *parameters);
-extern jb_err cgi_edit_actions_remove_url    (struct client_state *csp,
-                                              struct http_response *rsp,
-                                              const struct map *parameters);
-extern jb_err cgi_edit_actions_remove_url_form(struct client_state *csp,
-                                            struct http_response *rsp,
-                                            const struct map *parameters);
-extern jb_err cgi_edit_actions_section_remove(struct client_state *csp,
-                                              struct http_response *rsp,
-                                              const struct map *parameters);
-extern jb_err cgi_edit_actions_section_add   (struct client_state *csp,
-                                              struct http_response *rsp,
-                                              const struct map *parameters);
-extern jb_err cgi_edit_actions_section_swap  (struct client_state *csp,
-                                              struct http_response *rsp,
-                                              const struct map *parameters);
-#endif /* def FEATURE_CGI_EDIT_ACTIONS */
-#ifdef FEATURE_TOGGLE
-extern jb_err cgi_toggle(struct client_state *csp,
-                         struct http_response *rsp,
-                         const struct map *parameters);
-#endif /* def FEATURE_TOGGLE */
-
-/* Revision control strings from this header and associated .c file */
-extern const char cgiedit_rcs[];
-extern const char cgiedit_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef CGI_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/cgisimple.c b/external/privoxy/cgisimple.c
deleted file mode 100644
index 3543611..0000000
--- a/external/privoxy/cgisimple.c
+++ /dev/null
@@ -1,2295 +0,0 @@
-const char cgisimple_rcs[] = "$Id: cgisimple.c,v 1.91 2009/03/08 14:19:23 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cgisimple.c,v $
- *
- * Purpose     :  Simple CGIs to get information about Privoxy's
- *                status.
- *                
- *                Functions declared include:
- * 
- *
- * Copyright   :  Written by and Copyright (C) 2001-2008 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cgisimple.c,v $
- *    Revision 1.91  2009/03/08 14:19:23  fabiankeil
- *    Fix justified (but harmless) compiler warnings
- *    on platforms where sizeof(int) < sizeof(long).
- *
- *    Revision 1.90  2009/03/01 18:43:09  fabiankeil
- *    Fix cparser warnings.
- *
- *    Revision 1.89  2008/10/11 11:31:14  fabiankeil
- *    Add FEATURE_CONNECTION_KEEP_ALIVE to the list
- *    of conditional defines on the show-status page.
- *
- *    Revision 1.88  2008/08/30 12:03:07  fabiankeil
- *    Remove FEATURE_COOKIE_JAR.
- *
- *    Revision 1.87  2008/08/29 15:59:22  fabiankeil
- *    Fix two comments.
- *
- *    Revision 1.86  2008/06/28 14:19:05  fabiankeil
- *    Protocol detection is done case-insensitive, fix assertion
- *    to do the same. Yay for Privoxy-Regression-Test and zzuf.
- *
- *    Revision 1.85  2008/05/26 17:30:55  fabiankeil
- *    Provide an OpenSearch Description to access the
- *    show-url-info page through "search engine plugins".
- *
- *    Revision 1.84  2008/05/26 16:16:55  fabiankeil
- *    Spell error correctly.
- *
- *    Revision 1.83  2008/05/12 14:51:30  fabiankeil
- *    Don't complain about an invalid URL if show-url-info is requested
- *    without parameters. Regression introduced in 1.81 by yours truly.
- *
- *    Revision 1.82  2008/05/10 20:01:47  fabiankeil
- *    Fix an assertion that could erroneously
- *    trigger in case of memory shortage.
- *
- *    Revision 1.81  2008/05/05 09:54:39  fabiankeil
- *    In cgi_show_url_info(), make sure ftp URLs are
- *    declared invalid. Also simplify the code that adds
- *    "http://"; if no protocol has been specified.
- *
- *    Revision 1.80  2008/05/04 16:18:32  fabiankeil
- *    Provide parse_http_url() with a third parameter to specify
- *    whether or not URLs without protocol are acceptable.
- *
- *    Revision 1.79  2008/05/04 13:30:56  fabiankeil
- *    Streamline parse_http_url()'s prototype.
- *
- *    Revision 1.78  2008/05/03 16:50:11  fabiankeil
- *    Leverage content_filters_enabled() in cgi_show_url_info().
- *
- *    Revision 1.77  2008/05/02 09:47:48  fabiankeil
- *    In cgi_show_url_info, pass an initialized http structure
- *    to parse_http_url() as that will be required soonish and
- *    assert that https URLs are recognized correctly.
- *
- *    Revision 1.76  2008/04/28 09:13:30  fabiankeil
- *    In load_file(), remember the error reason and fclose()
- *    and return later on instead of right away.
- *
- *    Revision 1.75  2008/04/27 13:52:52  fabiankeil
- *    Move CGI file loading code into load_file() and
- *    add checks for unexpected errors.
- *
- *    Revision 1.74  2008/04/26 15:50:56  fabiankeil
- *    Fix macro name in cgi_show_file() error path.
- *
- *    Revision 1.73  2008/04/26 12:21:55  fabiankeil
- *    Forget about JB_ERR_PARSE. JB_ERR_CGI_PARAMS to the rescue.
- *
- *    Revision 1.72  2008/04/26 10:34:15  fabiankeil
- *    If zlib support is unavailable and there are content filters active
- *    but the prevent-compression action is disabled, include a warning
- *    on the show-url-info page that compression might prevent filtering.
- *
- *    Revision 1.71  2008/04/25 13:33:56  fabiankeil
- *    - Factor cgi_show_file() out of cgi_show_status().
- *    - Adjust cgi_show_status()'s parameter description to match reality.
- *
- *    Revision 1.70  2008/04/24 16:12:38  fabiankeil
- *    In cgi_show_status(), load the requested file at once.
- *    Using string_join() for every line really doesn't scale.
- *
- *    Revision 1.69  2008/04/17 14:40:48  fabiankeil
- *    Provide get_http_time() with the buffer size so it doesn't
- *    have to blindly assume that the buffer is big enough.
- *
- *    Revision 1.68  2008/03/27 18:27:21  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.67  2008/03/27 17:00:05  fabiankeil
- *    Turn the favicon blobs into locals.
- *
- *    Revision 1.66  2008/02/23 16:57:12  fabiankeil
- *    Rename url_actions() to get_url_actions() and let it
- *    use the standard parameter ordering.
- *
- *    Revision 1.65  2008/02/23 16:33:43  fabiankeil
- *    Let forward_url() use the standard parameter ordering
- *    and mark its second parameter immutable.
- *
- *    Revision 1.64  2008/02/03 13:56:07  fabiankeil
- *    Add SOCKS5 support for show-url-info CGI page.
- *
- *    Revision 1.63  2008/02/01 06:04:31  fabiankeil
- *    If edit buttons on the show-url-info CGI page are hidden, explain why.
- *
- *    Revision 1.62  2008/02/01 05:52:40  fabiankeil
- *    Hide edit buttons on the show-url-info CGI page if enable-edit-action
- *    is disabled. Patch by Lee with additional white space adjustments.
- *
- *    Revision 1.61  2008/01/26 11:13:25  fabiankeil
- *    If enable-edit-actions is disabled, hide the edit buttons and explain why.
- *
- *    Revision 1.60  2007/10/27 13:12:13  fabiankeil
- *    Finish 1.49 and check write access before
- *    showing edit buttons on show-url-info page.
- *
- *    Revision 1.59  2007/10/19 16:42:36  fabiankeil
- *    Plug memory leak I introduced five months ago.
- *    Yay Valgrind and Privoxy-Regression-Test.
- *
- *    Revision 1.58  2007/07/21 12:19:50  fabiankeil
- *    If show-url-info is called with an URL that Privoxy
- *    would reject as invalid, don't show unresolved forwarding
- *    variables, "final matches" or claim the site's secure.
- *
- *    Revision 1.57  2007/06/01 16:53:05  fabiankeil
- *    Adjust cgi_show_url_info() to show what forward-override{}
- *    would do with the requested URL (instead of showing how the
- *    request for the CGI page would be forwarded if it wasn't a
- *    CGI request).
- *
- *    Revision 1.56  2007/05/21 10:50:35  fabiankeil
- *    - Use strlcpy() instead of strcpy().
- *    - Stop treating actions files special. Expect a complete file name
- *      (with or without path) like it's done for the rest of the files.
- *      Closes FR#588084.
- *    - Don't rerun sed() in cgi_show_request().
- *
- *    Revision 1.55  2007/04/13 13:36:46  fabiankeil
- *    Reference action files in CGI URLs by id instead
- *    of using the first part of the file name.
- *    Fixes BR 1694250 and BR 1590556.
- *
- *    Revision 1.54  2007/04/09 18:11:35  fabiankeil
- *    Don't mistake VC++'s _snprintf() for a snprintf() replacement.
- *
- *    Revision 1.53  2007/04/08 13:21:04  fabiankeil
- *    Reference action files in CGI URLs by id instead
- *    of using the first part of the file name.
- *    Fixes BR 1694250 and BR 1590556.
- *
- *    Revision 1.52  2007/02/13 15:10:26  fabiankeil
- *    Apparently fopen()ing in "binary" mode doesn't require
- *    #ifdefs, it's already done without them in cgiedit.c.
- *
- *    Revision 1.51  2007/02/10 16:55:22  fabiankeil
- *    - Show forwarding settings on the show-url-info page
- *    - Fix some HTML syntax errors.
- *
- *    Revision 1.50  2007/01/23 15:51:17  fabiankeil
- *    Add favicon delivery functions.
- *
- *    Revision 1.49  2007/01/20 16:29:38  fabiankeil
- *    Suppress edit buttons for action files if Privoxy has
- *    no write access. Suggested by Roland in PR 1564026.
- *
- *    Revision 1.48  2007/01/20 15:31:31  fabiankeil
- *    Display warning if show-url-info CGI page
- *    is used while Privoxy is toggled off.
- *
- *    Revision 1.47  2007/01/12 15:07:10  fabiankeil
- *    Use zalloc in cgi_send_user_manual.
- *
- *    Revision 1.46  2007/01/02 12:49:46  fabiankeil
- *    Add FEATURE_ZLIB to the list of conditional
- *    defines at the show-status page.
- *
- *    Revision 1.45  2006/12/28 18:16:41  fabiankeil
- *    Fixed gcc43 compiler warnings, zero out cgi_send_user_manual's
- *    body memory before using it, replaced sprintf calls with snprintf.
- *
- *    Revision 1.44  2006/12/22 14:19:27  fabiankeil
- *    Removed checks whether or not AF_FILES have
- *    data structures associated with them in cgi_show_status.
- *    It doesn't matter as we're only interested in the file names.
- *
- *    For the action files the checks were always true,
- *    but they prevented empty filter files from being
- *    listed. Fixes parts of BR 1619208.
- *
- *    Revision 1.43  2006/12/17 17:57:56  fabiankeil
- *    - Added FEATURE_GRACEFUL_TERMINATION to the
- *      "conditional #defines" section
- *    - Escaped ampersands in generated HTML.
- *    - Renamed re-filter-filename to re-filter-filenames
- *
- *    Revision 1.42  2006/11/21 15:43:12  fabiankeil
- *    Add special treatment for WIN32 to make sure
- *    cgi_send_user_manual opens the files in binary mode.
- *    Fixes BR 1600411 and unbreaks image delivery.
- *
- *    Remove outdated comment.
- *
- *    Revision 1.41  2006/10/09 19:18:28  roro
- *    Redirect http://p.p/user-manual (without trailing slash) to
- *    http://p.p/user-manual/ (with trailing slash), otherwise links will be broken.
- *
- *    Revision 1.40  2006/09/09 13:05:33  fabiankeil
- *    Modified cgi_send_user_manual to serve binary
- *    content without destroying it first. Should also be
- *    faster now. Added ".jpg" check for Content-Type guessing.
- *
- *    Revision 1.39  2006/09/08 09:49:23  fabiankeil
- *    Deliver documents in the user-manual directory
- *    with "Content-Type text/css" if their filename
- *    ends with ".css".
- *
- *    Revision 1.38  2006/09/06 18:45:03  fabiankeil
- *    Incorporate modified version of Roland Rosenfeld's patch to
- *    optionally access the user-manual via Privoxy. Closes patch 679075.
- *
- *    Formatting changed to Privoxy style, added call to
- *    cgi_error_no_template if the requested file doesn't
- *    exist and modified check whether or not Privoxy itself
- *    should serve the manual. Should work cross-platform now.
- *
- *    Revision 1.37  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.35.2.7  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.35.2.6  2005/07/04 03:13:43  david__schmidt
- *    Undo some damaging memory leak patches
- *
- *    Revision 1.35.2.5  2005/05/07 21:50:55  david__schmidt
- *    A few memory leaks plugged (mostly on error paths)
- *
- *    Revision 1.35.2.4  2005/04/04 02:21:24  david__schmidt
- *    Another instance of:
- *    Don't show "Edit" buttons #ifndef FEATURE_CGI_EDIT_ACTIONS
- *    Thanks to Magnus Holmgren for the patch
- *
- *    Revision 1.35.2.3  2003/12/17 16:34:15  oes
- *     - Prevent line wrap beween "View/Edit" link buttons on status page
- *     - Some (mostly irrelevant) fixes for Out-of-mem-case handling
- *
- *    Revision 1.35.2.2  2003/04/03 13:48:28  oes
- *    Don't show "Edit" buttons #ifndef FEATURE_CGI_EDIT_ACTIONS
- *
- *    Revision 1.35.2.1  2002/07/04 15:02:38  oes
- *    Added ability to send redirects to send-banner CGI, so that it can completely mimic the image blocking action if called with type=auto
- *
- *    Revision 1.35.2.1  2002/07/01 17:32:04  morcego
- *    Applying patch from Andreas as provided by Hal on the list.
- *    Message-ID: <20020701121218.V1606@xxxxxxxxxxxxxxxxxx>
- *
- *    Revision 1.35  2002/05/12 21:44:44  jongfoster
- *    Adding amiga.[ch] revision information, if on an amiga.
- *
- *    Revision 1.34  2002/04/30 12:06:12  oes
- *    Deleted unused code from default_cgi
- *
- *    Revision 1.33  2002/04/30 11:14:52  oes
- *    Made csp the first parameter in *action_to_html
- *
- *    Revision 1.32  2002/04/26 18:29:13  jongfoster
- *    Fixing this Visual C++ warning:
- *    cgisimple.c(775) : warning C4018: '<' : signed/unsigned mismatch
- *
- *    Revision 1.31  2002/04/26 12:54:36  oes
- *     - Kill obsolete REDIRECT_URL code
- *     - Error handling fixes
- *     - Style sheet related HTML snipplet changes
- *     - cgi_show_url_info:
- *       - Matches now in table, actions on single lines,
- *         linked to help
- *       - standard.action suppressed
- *       - Buttons to View and Edit AFs
- *
- *    Revision 1.30  2002/04/24 02:18:08  oes
- *     - show-status is now the starting point for editing
- *       the actions files, generate list of all AFs with buttons
- *       for viewing and editing, new look for file list (Jon:
- *       buttons now aligned ;-P ), view mode now supports multiple
- *       AFs, name changes, no view links for unspecified files,
- *       no edit link for standard.action.
- *
- *     - Jon's multiple AF patch: cgi_show_url_info now uses all
- *       AFs and marks the output accordingly
- *
- *    Revision 1.29  2002/04/10 13:38:35  oes
- *    load_template signature changed
- *
- *    Revision 1.28  2002/04/07 15:42:12  jongfoster
- *    Fixing send-banner?type=auto when the image-blocker is
- *    a redirect to send-banner
- *
- *    Revision 1.27  2002/04/05 15:50:48  oes
- *    added send-stylesheet CGI
- *
- *    Revision 1.26  2002/04/04 00:36:36  gliptak
- *    always use pcre for matching
- *
- *    Revision 1.25  2002/04/03 22:28:03  gliptak
- *    Removed references to gnu_regex
- *
- *    Revision 1.24  2002/04/02 16:12:47  oes
- *    Fix: moving misplaced lines into #ifdef FEATURE_FORCE
- *
- *    Revision 1.23  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.22  2002/03/24 16:18:15  jongfoster
- *    Removing old logo
- *
- *    Revision 1.21  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.20  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.19  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.18  2002/03/12 01:44:49  oes
- *    Changed default for "blocked" image from jb logo to checkboard pattern
- *
- *    Revision 1.17  2002/03/08 16:43:18  oes
- *    Added choice beween GIF and PNG built-in images
- *
- *    Revision 1.16  2002/03/07 03:48:38  oes
- *     - Changed built-in images from GIF to PNG
- *       (with regard to Unisys patent issue)
- *     - Added a 4x4 pattern PNG which is less intrusive
- *       than the logo but also clearly marks the deleted banners
- *
- *    Revision 1.15  2002/03/06 22:54:35  jongfoster
- *    Automated function-comment nitpicking.
- *
- *    Revision 1.14  2002/03/02 04:14:50  david__schmidt
- *    Clean up a little CRLF unpleasantness that suddenly appeared
- *
- *    Revision 1.13  2002/02/21 00:10:37  jongfoster
- *    Adding send-banner?type=auto option
- *
- *    Revision 1.12  2002/01/23 01:03:32  jongfoster
- *    Fixing gcc [CygWin] compiler warnings
- *
- *    Revision 1.11  2002/01/23 00:01:04  jongfoster
- *    Adding cgi_transparent_gif() for http://i.j.b/t
- *    Adding missing html_encode() to many CGI functions.
- *    Adding urlmatch.[ch] to http://i.j.b/show-version
- *
- *    Revision 1.10  2002/01/17 21:10:37  jongfoster
- *    Changes to cgi_show_url_info to use new matching code from urlmatch.c.
- *    Also fixing a problem in the same function with improperly quoted URLs
- *    in output HTML, and adding code to handle https:// URLs correctly.
- *
- *    Revision 1.9  2001/11/30 23:09:15  jongfoster
- *    Now reports on FEATURE_CGI_EDIT_ACTIONS
- *    Removing FEATURE_DENY_GZIP from template
- *
- *    Revision 1.8  2001/11/13 00:14:07  jongfoster
- *    Fixing stupid bug now I've figured out what || means.
- *    (It always returns 0 or 1, not one of it's paramaters.)
- *
- *    Revision 1.7  2001/10/23 21:48:19  jongfoster
- *    Cleaning up error handling in CGI functions - they now send back
- *    a HTML error page and should never cause a FATAL error.  (Fixes one
- *    potential source of "denial of service" attacks).
- *
- *    CGI actions file editor that works and is actually useful.
- *
- *    Ability to toggle JunkBuster remotely using a CGI call.
- *
- *    You can turn off both the above features in the main configuration
- *    file, e.g. if you are running a multi-user proxy.
- *
- *    Revision 1.6  2001/10/14 22:00:32  jongfoster
- *    Adding support for a 404 error when an invalid CGI page is requested.
- *
- *    Revision 1.5  2001/10/07 15:30:41  oes
- *    Removed FEATURE_DENY_GZIP
- *
- *    Revision 1.4  2001/10/02 15:31:12  oes
- *    Introduced show-request cgi
- *
- *    Revision 1.3  2001/09/22 16:34:44  jongfoster
- *    Removing unneeded #includes
- *
- *    Revision 1.2  2001/09/19 18:01:11  oes
- *    Fixed comments; cosmetics
- *
- *    Revision 1.1  2001/09/16 17:08:54  jongfoster
- *    Moving simple CGI functions from cgi.c to new file cgisimple.c
- *
- *
- **********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <string.h>
-#include <assert.h>
-
-#ifdef HAVE_ACCESS
-#include <unistd.h>
-#endif /* def HAVE_ACCESS */
-
-#include "project.h"
-#include "cgi.h"
-#include "cgisimple.h"
-#include "list.h"
-#include "encode.h"
-#include "jcc.h"
-#include "filters.h"
-#include "actions.h"
-#include "miscutil.h"
-#include "loadcfg.h"
-#include "parsers.h"
-#include "urlmatch.h"
-#include "errlog.h"
-
-const char cgisimple_h_rcs[] = CGISIMPLE_H_VERSION;
-
-static char *show_rcs(void);
-static jb_err show_defines(struct map *exports);
-static jb_err cgi_show_file(struct client_state *csp,
-                            struct http_response *rsp,
-                            const struct map *parameters);
-static jb_err load_file(const char *filename, char **buffer, size_t *length);
-
-/*********************************************************************
- *
- * Function    :  cgi_default
- *
- * Description :  CGI function that is called for the CGI_SITE_1_HOST
- *                and CGI_SITE_2_HOST/CGI_SITE_2_PATH base URLs.
- *                Boring - only exports the default exports.
- *               
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory
- *
- *********************************************************************/
-jb_err cgi_default(struct client_state *csp,
-                   struct http_response *rsp,
-                   const struct map *parameters)
-{
-   struct map *exports;
-
-   (void)parameters;
-
-   assert(csp);
-   assert(rsp);
-
-   if (NULL == (exports = default_exports(csp, "")))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return template_fill_for_cgi(csp, "default", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_error_404
- *
- * Description :  CGI function that is called if an unknown action was
- *                given.
- *               
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_error_404(struct client_state *csp,
-                     struct http_response *rsp,
-                     const struct map *parameters)
-{
-   struct map *exports;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (NULL == (exports = default_exports(csp, NULL)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   rsp->status = strdup("404 Privoxy configuration page not found");
-   if (rsp->status == NULL)
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   return template_fill_for_cgi(csp, "cgi-error-404", exports, rsp);
-}
-
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-/*********************************************************************
- *
- * Function    :  cgi_die
- *
- * Description :  CGI function to shut down Privoxy.
- *                NOTE: Turning this on in a production build
- *                would be a BAD idea.  An EXTREMELY BAD idea.
- *                In short, don't do it.
- *               
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_die (struct client_state *csp,
-                struct http_response *rsp,
-                const struct map *parameters)
-{
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   /* quit */
-   g_terminate = 1;
-
-   /*
-    * I don't really care what gets sent back to the browser.
-    * Take the easy option - "out of memory" page.
-    */
-
-   return JB_ERR_MEMORY;
-}
-#endif /* def FEATURE_GRACEFUL_TERMINATION */
-
-
-/*********************************************************************
- *
- * Function    :  cgi_show_request
- *
- * Description :  Show the client's request and what sed() would have
- *                made of it.
- *               
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_show_request(struct client_state *csp,
-                        struct http_response *rsp,
-                        const struct map *parameters)
-{
-   char *p;
-   struct map *exports;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (NULL == (exports = default_exports(csp, "show-request")))
-   {
-      return JB_ERR_MEMORY;
-   }
-   
-   /*
-    * Repair the damage done to the IOB by get_header()
-    */
-   for (p = csp->iob->buf; p < csp->iob->eod; p++)
-   {
-      if (*p == '\0') *p = '\n';
-   }
-
-   /*
-    * Export the original client's request and the one we would
-    * be sending to the server if this wasn't a CGI call
-    */
-
-   if (map(exports, "client-request", 1, html_encode(csp->iob->buf), 0))
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   if (map(exports, "processed-request", 1,
-         html_encode_and_free_original(list_to_text(csp->headers)), 0))
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   return template_fill_for_cgi(csp, "show-request", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_send_banner
- *
- * Description :  CGI function that returns a banner. 
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *           type : Selects the type of banner between "trans", "logo",
- *                  and "auto". Defaults to "logo" if absent or invalid.
- *                  "auto" means to select as if we were image-blocking.
- *                  (Only the first character really counts; b and t are
- *                  equivalent).
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_send_banner(struct client_state *csp,
-                       struct http_response *rsp,
-                       const struct map *parameters)
-{
-   char imagetype = lookup(parameters, "type")[0];
-
-   /*
-    * If type is auto, then determine the right thing
-    * to do from the set-image-blocker action
-    */
-   if (imagetype == 'a') 
-   {
-      /*
-       * Default to pattern
-       */
-      imagetype = 'p';
-
-#ifdef FEATURE_IMAGE_BLOCKING
-      if ((csp->action->flags & ACTION_IMAGE_BLOCKER) != 0)
-      {
-         static const char prefix1[] = CGI_PREFIX "send-banner?type=";
-         static const char prefix2[] = "http://"; CGI_SITE_1_HOST "/send-banner?type=";
-         const char *p = csp->action->string[ACTION_STRING_IMAGE_BLOCKER];
-
-         if (p == NULL)
-         {
-            /* Use default - nothing to do here. */
-         }
-         else if (0 == strcmpic(p, "blank"))
-         {
-            imagetype = 'b';
-         }
-         else if (0 == strcmpic(p, "pattern"))
-         {
-            imagetype = 'p';
-         }
-
-         /*
-          * If the action is to call this CGI, determine
-          * the argument:
-          */
-         else if (0 == strncmpic(p, prefix1, sizeof(prefix1) - 1))
-         {
-            imagetype = p[sizeof(prefix1) - 1];
-         }
-         else if (0 == strncmpic(p, prefix2, sizeof(prefix2) - 1))
-         {
-            imagetype = p[sizeof(prefix2) - 1];
-         }
-
-         /*
-          * Everything else must (should) be a URL to
-          * redirect to.
-          */
-         else
-         {
-            imagetype = 'r';
-         }
-      }
-#endif /* def FEATURE_IMAGE_BLOCKING */
-   }
-      
-   /*
-    * Now imagetype is either the non-auto type we were called with,
-    * or it was auto and has since been determined. In any case, we
-    * can proceed to actually answering the request by sending a redirect
-    * or an image as appropriate:
-    */
-   if (imagetype == 'r') 
-   {
-      rsp->status = strdup("302 Local Redirect from Privoxy");
-      if (rsp->status == NULL)
-      {
-         return JB_ERR_MEMORY;
-      }
-      if (enlist_unique_header(rsp->headers, "Location",
-                               csp->action->string[ACTION_STRING_IMAGE_BLOCKER]))
-      {
-         return JB_ERR_MEMORY;
-      }
-   }
-   else
-   {
-      if ((imagetype == 'b') || (imagetype == 't')) 
-      {
-         rsp->body = bindup(image_blank_data, image_blank_length);
-         rsp->content_length = image_blank_length;
-      }
-      else
-      {
-         rsp->body = bindup(image_pattern_data, image_pattern_length);
-         rsp->content_length = image_pattern_length;
-      }
-
-      if (rsp->body == NULL)
-      {
-         return JB_ERR_MEMORY;
-      }
-      if (enlist(rsp->headers, "Content-Type: " BUILTIN_IMAGE_MIMETYPE))
-      {
-         return JB_ERR_MEMORY;
-      }
-
-      rsp->is_static = 1;
-   }
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_transparent_image
- *
- * Description :  CGI function that sends a 1x1 transparent image.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_transparent_image(struct client_state *csp,
-                             struct http_response *rsp,
-                             const struct map *parameters)
-{
-   (void)csp;
-   (void)parameters;
-
-   rsp->body = bindup(image_blank_data, image_blank_length);
-   rsp->content_length = image_blank_length;
-
-   if (rsp->body == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (enlist(rsp->headers, "Content-Type: " BUILTIN_IMAGE_MIMETYPE))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   rsp->is_static = 1;
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_send_default_favicon
- *
- * Description :  CGI function that sends the standard favicon.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_send_default_favicon(struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters)
-{
-   static const char default_favicon_data[] =
-      "\000\000\001\000\001\000\020\020\002\000\000\000\000\000\260"
-      "\000\000\000\026\000\000\000\050\000\000\000\020\000\000\000"
-      "\040\000\000\000\001\000\001\000\000\000\000\000\100\000\000"
-      "\000\000\000\000\000\000\000\000\000\002\000\000\000\000\000"
-      "\000\000\377\377\377\000\377\000\052\000\017\360\000\000\077"
-      "\374\000\000\161\376\000\000\161\376\000\000\361\377\000\000"
-      "\361\377\000\000\360\017\000\000\360\007\000\000\361\307\000"
-      "\000\361\307\000\000\361\307\000\000\360\007\000\000\160\036"
-      "\000\000\177\376\000\000\077\374\000\000\017\360\000\000\360"
-      "\017\000\000\300\003\000\000\200\001\000\000\200\001\000\000"
-      "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
-      "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
-      "\000\000\200\001\000\000\200\001\000\000\300\003\000\000\360"
-      "\017\000\000";
-   static const size_t favicon_length = sizeof(default_favicon_data) - 1;
-
-   (void)csp;
-   (void)parameters;
-
-   rsp->body = bindup(default_favicon_data, favicon_length);
-   rsp->content_length = favicon_length;
-
-   if (rsp->body == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (enlist(rsp->headers, "Content-Type: image/x-icon"))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   rsp->is_static = 1;
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_send_error_favicon
- *
- * Description :  CGI function that sends the favicon for error pages.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_send_error_favicon(struct client_state *csp,
-                              struct http_response *rsp,
-                              const struct map *parameters)
-{
-   static const char error_favicon_data[] =
-      "\000\000\001\000\001\000\020\020\002\000\000\000\000\000\260"
-      "\000\000\000\026\000\000\000\050\000\000\000\020\000\000\000"
-      "\040\000\000\000\001\000\001\000\000\000\000\000\100\000\000"
-      "\000\000\000\000\000\000\000\000\000\002\000\000\000\000\000"
-      "\000\000\377\377\377\000\000\000\377\000\017\360\000\000\077"
-      "\374\000\000\161\376\000\000\161\376\000\000\361\377\000\000"
-      "\361\377\000\000\360\017\000\000\360\007\000\000\361\307\000"
-      "\000\361\307\000\000\361\307\000\000\360\007\000\000\160\036"
-      "\000\000\177\376\000\000\077\374\000\000\017\360\000\000\360"
-      "\017\000\000\300\003\000\000\200\001\000\000\200\001\000\000"
-      "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
-      "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
-      "\000\000\200\001\000\000\200\001\000\000\300\003\000\000\360"
-      "\017\000\000";
-   static const size_t favicon_length = sizeof(error_favicon_data) - 1;
-
-   (void)csp;
-   (void)parameters;
-
-   rsp->body = bindup(error_favicon_data, favicon_length);
-   rsp->content_length = favicon_length;
-
-   if (rsp->body == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (enlist(rsp->headers, "Content-Type: image/x-icon"))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   rsp->is_static = 1;
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_send_stylesheet
- *
- * Description :  CGI function that sends a css stylesheet found
- *                in the cgi-style.css template
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_send_stylesheet(struct client_state *csp,
-                           struct http_response *rsp,
-                           const struct map *parameters)
-{
-   jb_err err;
-   
-   assert(csp);
-   assert(rsp);
-
-   (void)parameters;
-
-   err = template_load(csp, &rsp->body, "cgi-style.css", 0);
-
-   if (err == JB_ERR_FILE)
-   {
-      /*
-       * No way to tell user; send empty stylesheet
-       */
-      log_error(LOG_LEVEL_ERROR, "Could not find cgi-style.css template");
-   }
-   else if (err)
-   {
-      return err; /* JB_ERR_MEMORY */
-   }
-
-   if (enlist(rsp->headers, "Content-Type: text/css"))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_send_url_info_osd
- *
- * Description :  CGI function that sends the OpenSearch Description
- *                template for the show-url-info page. It allows to
- *                access the page through "search engine plugins".
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_send_url_info_osd(struct client_state *csp,
-                               struct http_response *rsp,
-                               const struct map *parameters)
-{
-   jb_err err = JB_ERR_MEMORY;
-   struct map *exports = default_exports(csp, NULL);
-
-   (void)csp;
-   (void)parameters;
-
-   if (NULL != exports)
-   {
-      err = template_fill_for_cgi(csp, "url-info-osd.xml", exports, rsp);
-      if (JB_ERR_OK == err)
-      {
-         err = enlist(rsp->headers,
-            "Content-Type: application/opensearchdescription+xml");
-      }
-   }
-
-   return err;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_send_user_manual
- *
- * Description :  CGI function that sends a file in the user
- *                manual directory.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : file=name.html, the name of the HTML file
- *                  (relative to user-manual from config)
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_send_user_manual(struct client_state *csp,
-                            struct http_response *rsp,
-                            const struct map *parameters)
-{
-   const char * filename;
-   char *full_path;
-   jb_err err = JB_ERR_OK;
-   size_t length;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (!parameters->first)
-   {
-      /* requested http://p.p/user-manual (without trailing slash) */
-      return cgi_redirect(rsp, CGI_PREFIX "user-manual/");
-   }
-
-   get_string_param(parameters, "file", &filename);
-   /* Check paramter for hack attempts */
-   if (filename && strchr(filename, '/'))
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-   if (filename && strstr(filename, ".."))
-   {
-      return JB_ERR_CGI_PARAMS;
-   }
-
-   full_path = make_path(csp->config->usermanual, filename ? filename : "index.html");
-   if (full_path == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = load_file(full_path, &rsp->body, &rsp->content_length);
-   if (JB_ERR_OK != err)
-   {
-      assert((JB_ERR_FILE == err) || (JB_ERR_MEMORY == err));
-      if (JB_ERR_FILE == err)
-      {
-         err = cgi_error_no_template(csp, rsp, full_path);
-      }
-      freez(full_path);
-      return err;
-   }
-   freez(full_path);
-
-   /* Guess correct Content-Type based on the filename's ending */
-   if (filename)
-   {
-      length = strlen(filename);
-   }
-   else
-   {
-      length = 0;
-   } 
-   if((length>=4) && !strcmp(&filename[length-4], ".css"))
-   {
-      err = enlist(rsp->headers, "Content-Type: text/css");
-   }
-   else if((length>=4) && !strcmp(&filename[length-4], ".jpg"))
-   {
-      err = enlist(rsp->headers, "Content-Type: image/jpeg");
-   }
-   else
-   {
-      err = enlist(rsp->headers, "Content-Type: text/html");
-   }
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_show_version
- *
- * Description :  CGI function that returns a a web page describing the
- *                file versions of Privoxy.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : none
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_show_version(struct client_state *csp,
-                        struct http_response *rsp,
-                        const struct map *parameters)
-{
-   struct map *exports;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (NULL == (exports = default_exports(csp, "show-version")))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (map(exports, "sourceversions", 1, show_rcs(), 0))
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   return template_fill_for_cgi(csp, "show-version", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_show_status
- *
- * Description :  CGI function that returns a web page describing the
- *                current status of Privoxy.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *        file :  Which file to show.  Only first letter is checked,
- *                valid values are:
- *                - "a"ction file
- *                - "r"egex
- *                - "t"rust
- *                Default is to show menu and other information.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_show_status(struct client_state *csp,
-                       struct http_response *rsp,
-                       const struct map *parameters)
-{
-   char *s = NULL;
-   unsigned i;
-   int j;
-
-   char buf[BUFFER_SIZE];
-#ifdef FEATURE_STATISTICS
-   float perc_rej;   /* Percentage of http requests rejected */
-   int local_urls_read;
-   int local_urls_rejected;
-#endif /* ndef FEATURE_STATISTICS */
-   jb_err err = JB_ERR_OK;
-
-   struct map *exports;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if ('\0' != *(lookup(parameters, "file")))
-   {
-      return cgi_show_file(csp, rsp, parameters);
-   }
-
-   if (NULL == (exports = default_exports(csp, "show-status")))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   s = strdup("");
-   for (j = 0; (s != NULL) && (j < Argc); j++)
-   {
-      if (!err) err = string_join  (&s, html_encode(Argv[j]));
-      if (!err) err = string_append(&s, " ");
-   }
-   if (!err) err = map(exports, "invocation", 1, s, 0);
-
-   if (!err) err = map(exports, "options", 1, csp->config->proxy_args, 1);
-   if (!err) err = show_defines(exports);
-
-   if (err) 
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-#ifdef FEATURE_STATISTICS
-   local_urls_read     = urls_read;
-   local_urls_rejected = urls_rejected;
-
-   /*
-    * Need to alter the stats not to include the fetch of this
-    * page.
-    *
-    * Can't do following thread safely! doh!
-    *
-    * urls_read--;
-    * urls_rejected--; * This will be incremented subsequently *
-    */
-
-   if (local_urls_read == 0)
-   {
-      if (!err) err = map_block_killer(exports, "have-stats");
-   }
-   else
-   {
-      if (!err) err = map_block_killer(exports, "have-no-stats");
-
-      perc_rej = (float)local_urls_rejected * 100.0F /
-            (float)local_urls_read;
-
-      snprintf(buf, sizeof(buf), "%d", local_urls_read);
-      if (!err) err = map(exports, "requests-received", 1, buf, 1);
-
-      snprintf(buf, sizeof(buf), "%d", local_urls_rejected);
-      if (!err) err = map(exports, "requests-blocked", 1, buf, 1);
-
-      snprintf(buf, sizeof(buf), "%6.2f", perc_rej);
-      if (!err) err = map(exports, "percent-blocked", 1, buf, 1);
-   }
-
-#else /* ndef FEATURE_STATISTICS */
-   err = err || map_block_killer(exports, "statistics");
-#endif /* ndef FEATURE_STATISTICS */
-   
-   /* 
-    * List all action files in use, together with view and edit links,
-    * except for standard.action, which should only be viewable. (Not
-    * enforced in the editor itself)
-    * FIXME: Shouldn't include hardwired HTML here, use line template instead!
-    */
-   s = strdup("");
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (csp->actions_list[i] != NULL)
-      {
-         if (!err) err = string_append(&s, "<tr><td>");
-         if (!err) err = string_join(&s, html_encode(csp->actions_list[i]->filename));
-         snprintf(buf, sizeof(buf),
-            "</td><td class=\"buttons\"><a href=\"/show-status?file=actions&amp;index=%u\">View</a>", i);
-         if (!err) err = string_append(&s, buf);
-
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-         if ((csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)
-            && (NULL == strstr(csp->actions_list[i]->filename, "standard.action"))
-            && (NULL != csp->config->actions_file_short[i]))
-         {
-#ifdef HAVE_ACCESS
-            if (access(csp->config->actions_file[i], W_OK) == 0)
-            {
-#endif /* def HAVE_ACCESS */
-               snprintf(buf, sizeof(buf), "&nbsp;&nbsp;<a href=\"/edit-actions-list?f=%u\">Edit</a>", i);
-               if (!err) err = string_append(&s, buf);
-#ifdef HAVE_ACCESS
-            }
-            else
-            {
-               if (!err) err = string_append(&s, "&nbsp;&nbsp;<strong>No write access.</strong>");
-            }
-#endif /* def HAVE_ACCESS */
-         }
-#endif
-
-         if (!err) err = string_append(&s, "</td></tr>\n");
-      }
-   }
-   if (*s != '\0')   
-   {
-      if (!err) err = map(exports, "actions-filenames", 1, s, 0);
-   }
-   else
-   {
-      if (!err) err = map(exports, "actions-filenames", 1, "<tr><td>None specified</td></tr>", 1);
-   }
-
-   /* 
-    * List all re_filterfiles in use, together with view options.
-    * FIXME: Shouldn't include hardwired HTML here, use line template instead!
-    */
-   s = strdup("");
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (csp->rlist[i] != NULL)
-      {
-         if (!err) err = string_append(&s, "<tr><td>");
-         if (!err) err = string_join(&s, html_encode(csp->rlist[i]->filename));
-         snprintf(buf, sizeof(buf),
-            "</td><td class=\"buttons\"><a href=\"/show-status?file=filter&amp;index=%u\">View</a>", i);
-         if (!err) err = string_append(&s, buf);
-         if (!err) err = string_append(&s, "</td></tr>\n");
-      }
-   }
-   if (*s != '\0')   
-   {
-      if (!err) err = map(exports, "re-filter-filenames", 1, s, 0);
-   }
-   else
-   {
-      if (!err) err = map(exports, "re-filter-filenames", 1, "<tr><td>None specified</td></tr>", 1);
-      if (!err) err = map_block_killer(exports, "have-filterfile");
-   }
-
-#ifdef FEATURE_TRUST
-   if (csp->tlist)
-   {
-      if (!err) err = map(exports, "trust-filename", 1, html_encode(csp->tlist->filename), 0);
-   }
-   else
-   {
-      if (!err) err = map(exports, "trust-filename", 1, "None specified", 1);
-      if (!err) err = map_block_killer(exports, "have-trustfile");
-   }
-#else
-   if (!err) err = map_block_killer(exports, "trust-support");
-#endif /* ndef FEATURE_TRUST */
-
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-   if (!err && (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-   {
-      err = map_block_killer(exports, "cgi-editor-is-disabled");
-   }
-#endif /* ndef CGI_EDIT_ACTIONS */
-
-   if (err)
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   return template_fill_for_cgi(csp, "show-status", exports, rsp);
-}
-
- 
-/*********************************************************************
- *
- * Function    :  cgi_show_url_info
- *
- * Description :  CGI function that determines and shows which actions
- *                Privoxy will perform for a given url, and which
- *                matches starting from the defaults have lead to that.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *            url : The url whose actions are to be determined.
- *                  If url is unset, the url-given conditional will be
- *                  set, so that all but the form can be suppressed in
- *                  the template.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_show_url_info(struct client_state *csp,
-                         struct http_response *rsp,
-                         const struct map *parameters)
-{
-   char *url_param;
-   struct map *exports;
-   char buf[150];
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   if (NULL == (exports = default_exports(csp, "show-url-info")))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   /*
-    * Get the url= parameter (if present) and remove any leading/trailing spaces.
-    */
-   url_param = strdup(lookup(parameters, "url"));
-   if (url_param == NULL)
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-   chomp(url_param);
-
-   /*
-    * Handle prefixes.  4 possibilities:
-    * 1) "http://"; or "https://"; prefix present and followed by URL - OK
-    * 2) Only the "http://"; or "https://"; part is present, no URL - change
-    *    to empty string so it will be detected later as "no URL".
-    * 3) Parameter specified but doesn't contain "http(s?)://" - add a
-    *    "http://"; prefix.
-    * 4) Parameter not specified or is empty string - let this fall through
-    *    for now, next block of code will handle it.
-    */
-   if (0 == strncmp(url_param, "http://";, 7))
-   {
-      if (url_param[7] == '\0')
-      {
-         /*
-          * Empty URL (just prefix).
-          * Make it totally empty so it's caught by the next if()
-          */
-         url_param[0] = '\0';
-      }
-   }
-   else if (0 == strncmp(url_param, "https://";, 8))
-   {
-      if (url_param[8] == '\0')
-      {
-         /*
-          * Empty URL (just prefix).
-          * Make it totally empty so it's caught by the next if()
-          */
-         url_param[0] = '\0';
-      }
-   }
-   else if ((url_param[0] != '\0') && (NULL == strstr(url_param, "://")))
-   {
-      /* No prefix - assume http:// */
-      char *url_param_prefixed = strdup("http://";);
-
-      if (JB_ERR_OK != string_join(&url_param_prefixed, url_param))
-      {
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-      url_param = url_param_prefixed;
-   }
-
-   /*
-    * Hide "toggle off" warning if Privoxy is toggled on.
-    */
-   if (
-#ifdef FEATURE_TOGGLE
-       (global_toggle_state == 1) &&
-#endif /* def FEATURE_TOGGLE */
-       map_block_killer(exports, "privoxy-is-toggled-off")
-      )
-   {
-      free_map(exports);
-      return JB_ERR_MEMORY;
-   }
-
-   if (url_param[0] == '\0')
-   {
-      /* URL paramater not specified, display query form only. */
-      free(url_param);
-      if (map_block_killer(exports, "url-given")
-        || map(exports, "url", 1, "", 1))
-      {
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-   }
-   else
-   {
-      /* Given a URL, so query it. */
-      jb_err err;
-      char *matches;
-      char *s;
-      int hits = 0;
-      struct file_list *fl;
-      struct url_actions *b;
-      struct http_request url_to_query[1];
-      struct current_action_spec action[1];
-      int i;
-      
-      if (map(exports, "url", 1, html_encode(url_param), 0))
-      {
-         free(url_param);
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-
-      init_current_action(action);
-
-      if (map(exports, "default", 1, current_action_to_html(csp, action), 0))
-      {
-         free_current_action(action);
-         free(url_param);
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-
-      memset(url_to_query, '\0', sizeof(url_to_query));
-      err = parse_http_url(url_param, url_to_query, REQUIRE_PROTOCOL);
-      assert((err != JB_ERR_OK) || (url_to_query->ssl == !strncmpic(url_param, "https://";, 8)));
-
-      free(url_param);
-
-      if (err == JB_ERR_MEMORY)
-      {
-         free_http_request(url_to_query);
-         free_current_action(action);
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-      else if (err)
-      {
-         /* Invalid URL */
-
-         err = map(exports, "matches", 1, "<b>[Invalid URL specified!]</b>" , 1);
-         if (!err) err = map(exports, "final", 1, lookup(exports, "default"), 1);
-         if (!err) err = map_block_killer(exports, "valid-url");
-
-         free_current_action(action);
-         free_http_request(url_to_query);
-
-         if (err)
-         {
-            free_map(exports);
-            return JB_ERR_MEMORY;
-         }
-
-         return template_fill_for_cgi(csp, "show-url-info", exports, rsp);
-      }
-
-      /*
-       * We have a warning about SSL paths.  Hide it for unencrypted sites.
-       */
-      if (!url_to_query->ssl)
-      {
-         if (map_block_killer(exports, "https"))
-         {
-            free_current_action(action);
-            free_map(exports);
-            free_http_request(url_to_query);
-            return JB_ERR_MEMORY;
-         }
-      }
-
-      matches = strdup("<table summary=\"\" class=\"transparent\">");
-
-      for (i = 0; i < MAX_AF_FILES; i++)
-      {
-         if (NULL == csp->config->actions_file_short[i]
-             || !strcmp(csp->config->actions_file_short[i], "standard.action")) continue;
-
-         b = NULL;
-         hits = 1;
-         if ((fl = csp->actions_list[i]) != NULL)
-         {
-            if ((b = fl->f) != NULL)
-            {
-               /* FIXME: Hardcoded HTML! */
-               string_append(&matches, "<tr><th>In file: ");
-               string_join  (&matches, html_encode(csp->config->actions_file_short[i]));
-               snprintf(buf, sizeof(buf), " <a class=\"cmd\" href=\"/show-status?file=actions&amp;index=%d\">", i);
-               string_append(&matches, buf);
-               string_append(&matches, "View</a>");
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-               if (csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS)
-               {
-#ifdef HAVE_ACCESS
-                  if (access(csp->config->actions_file[i], W_OK) == 0)
-                  {
-#endif /* def HAVE_ACCESS */
-                     snprintf(buf, sizeof(buf),
-                        " <a class=\"cmd\" href=\"/edit-actions-list?f=%d\">", i);
-                     string_append(&matches, buf);
-                     string_append(&matches, "Edit</a>");
-#ifdef HAVE_ACCESS
-                  }
-                  else
-                  {
-                     string_append(&matches, " <strong>No write access.</strong>");
-                  }
-#endif /* def HAVE_ACCESS */
-               }
-#endif /* FEATURE_CGI_EDIT_ACTIONS */
-
-               string_append(&matches, "</th></tr>\n");
-
-               hits = 0;
-               b = b->next;
-            }
-         }
-
-         for (; (b != NULL) && (matches != NULL); b = b->next)
-         {
-            if (url_match(b->url, url_to_query))
-            {
-               string_append(&matches, "<tr><td>{");
-               string_join  (&matches, actions_to_html(csp, b->action));
-               string_append(&matches, " }<br>\n<code>");
-               string_join  (&matches, html_encode(b->url->spec));
-               string_append(&matches, "</code></td></tr>\n");
-
-               if (merge_current_action(action, b->action))
-               {
-                  freez(matches);
-                  free_http_request(url_to_query);
-                  free_current_action(action);
-                  free_map(exports);
-                  return JB_ERR_MEMORY;
-               }
-               hits++;
-            }
-         }
-
-         if (!hits)
-         {
-            string_append(&matches, "<tr><td>(no matches in this file)</td></tr>\n");
-         }
-      }
-      string_append(&matches, "</table>\n");
-
-      /*
-       * XXX: Kludge to make sure the "Forward settings" section
-       * shows what forward-override{} would do with the requested URL.
-       * No one really cares how the CGI request would be forwarded
-       * if it wasn't intercepted as CGI request in the first place.
-       *
-       * From here on the action bitmask will no longer reflect
-       * the real url (http://config.privoxy.org/show-url-info?url=.*),
-       * but luckily it's no longer required later on anyway.
-       */
-      free_current_action(csp->action);
-      get_url_actions(csp, url_to_query);
-
-      /*
-       * Fill in forwarding settings.
-       *
-       * The possibilities are:
-       *  - no forwarding
-       *  - http forwarding only
-       *  - socks4(a) forwarding only
-       *  - socks4(a) and http forwarding.
-       *
-       * XXX: Parts of this code could be reused for the
-       * "forwarding-failed" template which currently doesn't
-       * display the proxy port and an eventual second forwarder.
-       */
-      {
-         const struct forward_spec *fwd = forward_url(csp, url_to_query);
-
-         if ((fwd->gateway_host == NULL) && (fwd->forward_host == NULL))
-         {
-            if (!err) err = map_block_killer(exports, "socks-forwarder");
-            if (!err) err = map_block_killer(exports, "http-forwarder");
-         }
-         else
-         {
-            char port[10]; /* We save proxy ports as int but need a string here */
-
-            if (!err) err = map_block_killer(exports, "no-forwarder");
-
-            if (fwd->gateway_host != NULL)
-            {
-               char *socks_type = NULL;
-
-               switch (fwd->type)
-               {
-                  case SOCKS_4:
-                     socks_type = "socks4";
-                     break;
-                  case SOCKS_4A:
-                     socks_type = "socks4a";
-                     break;
-                  case SOCKS_5:
-                     socks_type = "socks5";
-                     break;
-                  default:
-                     log_error(LOG_LEVEL_FATAL, "Unknown socks type: %d.", fwd->type);
-               }
-
-               if (!err) err = map(exports, "socks-type", 1, socks_type, 1);
-               if (!err) err = map(exports, "gateway-host", 1, fwd->gateway_host, 1);
-               snprintf(port, sizeof(port), "%d", fwd->gateway_port);
-               if (!err) err = map(exports, "gateway-port", 1, port, 1);
-            }
-            else
-            {
-               if (!err) err = map_block_killer(exports, "socks-forwarder");
-            }
-
-            if (fwd->forward_host != NULL)
-            {
-               if (!err) err = map(exports, "forward-host", 1, fwd->forward_host, 1);
-               snprintf(port, sizeof(port), "%d", fwd->forward_port);
-               if (!err) err = map(exports, "forward-port", 1, port, 1);
-            }
-            else
-            {
-               if (!err) err = map_block_killer(exports, "http-forwarder");
-            }
-         }
-      }
-
-      free_http_request(url_to_query);
-
-      if (err || matches == NULL)
-      {
-         free_current_action(action);
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-      if ((csp->config->feature_flags & RUNTIME_FEATURE_CGI_EDIT_ACTIONS))
-      {
-         err = map_block_killer(exports, "cgi-editor-is-disabled");
-      }
-#endif /* FEATURE_CGI_EDIT_ACTIONS */
-
-      /*
-       * If zlib support is available, if no content filters
-       * are enabled or if the prevent-compression action is enabled,
-       * suppress the "compression could prevent filtering" warning.
-       */
-#ifndef FEATURE_ZLIB
-      if (!content_filters_enabled(action) ||
-         (action->flags & ACTION_NO_COMPRESSION))
-#endif
-      {
-         if (!err) err = map_block_killer(exports, "filters-might-be-ineffective");
-      }
-
-      if (err || map(exports, "matches", 1, matches , 0))
-      {
-         free_current_action(action);
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-
-      s = current_action_to_html(csp, action);
-
-      free_current_action(action);
-
-      if (map(exports, "final", 1, s, 0))
-      {
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-   }
-
-   return template_fill_for_cgi(csp, "show-url-info", exports, rsp);
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_robots_txt
- *
- * Description :  CGI function to return "/robots.txt".
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters : None
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-jb_err cgi_robots_txt(struct client_state *csp,
-                      struct http_response *rsp,
-                      const struct map *parameters)
-{
-   char buf[100];
-   jb_err err;
-
-   (void)csp;
-   (void)parameters;
-
-   rsp->body = strdup(
-      "# This is the Privoxy control interface.\n"
-      "# It isn't very useful to index it, and you're likely to break stuff.\n"
-      "# So go away!\n"
-      "\n"
-      "User-agent: *\n"
-      "Disallow: /\n"
-      "\n");
-   if (rsp->body == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   err = enlist_unique(rsp->headers, "Content-Type: text/plain", 13);
-
-   rsp->is_static = 1;
-
-   get_http_time(7 * 24 * 60 * 60, buf, sizeof(buf)); /* 7 days into future */
-   if (!err) err = enlist_unique_header(rsp->headers, "Expires", buf);
-
-   return (err ? JB_ERR_MEMORY : JB_ERR_OK);
-}
-
-
-/*********************************************************************
- *
- * Function    :  show_defines
- *
- * Description :  Add to a map the state od all conditional #defines
- *                used when building
- *
- * Parameters  :
- *          1  :  exports = map to extend
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-static jb_err show_defines(struct map *exports)
-{
-   jb_err err = JB_ERR_OK;
-
-#ifdef FEATURE_ACL
-   if (!err) err = map_conditional(exports, "FEATURE_ACL", 1);
-#else /* ifndef FEATURE_ACL */
-   if (!err) err = map_conditional(exports, "FEATURE_ACL", 0);
-#endif /* ndef FEATURE_ACL */
-
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-   if (!err) err = map_conditional(exports, "FEATURE_CGI_EDIT_ACTIONS", 1);
-#else /* ifndef FEATURE_CGI_EDIT_ACTIONS */
-   if (!err) err = map_conditional(exports, "FEATURE_CGI_EDIT_ACTIONS", 0);
-#endif /* ndef FEATURE_CGI_EDIT_ACTIONS */
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   if (!err) err = map_conditional(exports, "FEATURE_CONNECTION_KEEP_ALIVE", 1);
-#else /* ifndef FEATURE_CGI_EDIT_ACTIONS */
-   if (!err) err = map_conditional(exports, "FEATURE_CONNECTION_KEEP_ALIVE", 0);
-#endif /* ndef FEATURE_CONNECTION_KEEP_ALIVE */
-
-#ifdef FEATURE_FAST_REDIRECTS
-   if (!err) err = map_conditional(exports, "FEATURE_FAST_REDIRECTS", 1);
-#else /* ifndef FEATURE_FAST_REDIRECTS */
-   if (!err) err = map_conditional(exports, "FEATURE_FAST_REDIRECTS", 0);
-#endif /* ndef FEATURE_FAST_REDIRECTS */
-
-#ifdef FEATURE_FORCE_LOAD
-   if (!err) err = map_conditional(exports, "FEATURE_FORCE_LOAD", 1);
-   if (!err) err = map(exports, "FORCE_PREFIX", 1, FORCE_PREFIX, 1);
-#else /* ifndef FEATURE_FORCE_LOAD */
-   if (!err) err = map_conditional(exports, "FEATURE_FORCE_LOAD", 0);
-   if (!err) err = map(exports, "FORCE_PREFIX", 1, "(none - disabled)", 1);
-#endif /* ndef FEATURE_FORCE_LOAD */
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-   if (!err) err = map_conditional(exports, "FEATURE_GRACEFUL_TERMINATION", 1);
-#else /* ifndef FEATURE_GRACEFUL_TERMINATION */
-   if (!err) err = map_conditional(exports, "FEATURE_GRACEFUL_TERMINATION", 0);
-#endif /* ndef FEATURE_GRACEFUL_TERMINATION */
-
-#ifdef FEATURE_IMAGE_BLOCKING
-   if (!err) err = map_conditional(exports, "FEATURE_IMAGE_BLOCKING", 1);
-#else /* ifndef FEATURE_IMAGE_BLOCKING */
-   if (!err) err = map_conditional(exports, "FEATURE_IMAGE_BLOCKING", 0);
-#endif /* ndef FEATURE_IMAGE_BLOCKING */
-
-#ifdef FEATURE_IMAGE_DETECT_MSIE
-   if (!err) err = map_conditional(exports, "FEATURE_IMAGE_DETECT_MSIE", 1);
-#else /* ifndef FEATURE_IMAGE_DETECT_MSIE */
-   if (!err) err = map_conditional(exports, "FEATURE_IMAGE_DETECT_MSIE", 0);
-#endif /* ndef FEATURE_IMAGE_DETECT_MSIE */
-
-#ifdef FEATURE_NO_GIFS
-   if (!err) err = map_conditional(exports, "FEATURE_NO_GIFS", 1);
-#else /* ifndef FEATURE_NO_GIFS */
-   if (!err) err = map_conditional(exports, "FEATURE_NO_GIFS", 0);
-#endif /* ndef FEATURE_NO_GIFS */
-
-#ifdef FEATURE_PTHREAD
-   if (!err) err = map_conditional(exports, "FEATURE_PTHREAD", 1);
-#else /* ifndef FEATURE_PTHREAD */
-   if (!err) err = map_conditional(exports, "FEATURE_PTHREAD", 0);
-#endif /* ndef FEATURE_PTHREAD */
-
-#ifdef FEATURE_STATISTICS
-   if (!err) err = map_conditional(exports, "FEATURE_STATISTICS", 1);
-#else /* ifndef FEATURE_STATISTICS */
-   if (!err) err = map_conditional(exports, "FEATURE_STATISTICS", 0);
-#endif /* ndef FEATURE_STATISTICS */
-
-#ifdef FEATURE_TOGGLE
-   if (!err) err = map_conditional(exports, "FEATURE_TOGGLE", 1);
-#else /* ifndef FEATURE_TOGGLE */
-   if (!err) err = map_conditional(exports, "FEATURE_TOGGLE", 0);
-#endif /* ndef FEATURE_TOGGLE */
-
-#ifdef FEATURE_TRUST
-   if (!err) err = map_conditional(exports, "FEATURE_TRUST", 1);
-#else /* ifndef FEATURE_TRUST */
-   if (!err) err = map_conditional(exports, "FEATURE_TRUST", 0);
-#endif /* ndef FEATURE_TRUST */
-
-#ifdef FEATURE_ZLIB
-   if (!err) err = map_conditional(exports, "FEATURE_ZLIB", 1);
-#else /* ifndef FEATURE_ZLIB */
-   if (!err) err = map_conditional(exports, "FEATURE_ZLIB", 0);
-#endif /* ndef FEATURE_ZLIB */
-
-#ifdef STATIC_PCRE
-   if (!err) err = map_conditional(exports, "STATIC_PCRE", 1);
-#else /* ifndef STATIC_PCRE */
-   if (!err) err = map_conditional(exports, "STATIC_PCRE", 0);
-#endif /* ndef STATIC_PCRE */
-
-#ifdef STATIC_PCRS
-   if (!err) err = map_conditional(exports, "STATIC_PCRS", 1);
-#else /* ifndef STATIC_PCRS */
-   if (!err) err = map_conditional(exports, "STATIC_PCRS", 0);
-#endif /* ndef STATIC_PCRS */
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  show_rcs
- *
- * Description :  Create a string with the rcs info for all sourcefiles
- *
- * Parameters  :  None
- *
- * Returns     :  A string, or NULL on out-of-memory.
- *
- *********************************************************************/
-static char *show_rcs(void)
-{
-   char *result = strdup("");
-   char buf[BUFFER_SIZE];
-
-   /* Instead of including *all* dot h's in the project (thus creating a
-    * tremendous amount of dependencies), I will concede to declaring them
-    * as extern's.  This forces the developer to add to this list, but oh well.
-    */
-
-#define SHOW_RCS(__x)              \
-   {                               \
-      extern const char __x[];     \
-      snprintf(buf, sizeof(buf), " %s\n", __x);   \
-      string_append(&result, buf); \
-   }
-
-   /* In alphabetical order */
-   SHOW_RCS(actions_h_rcs)
-   SHOW_RCS(actions_rcs)
-#ifdef AMIGA
-   SHOW_RCS(amiga_h_rcs)
-   SHOW_RCS(amiga_rcs)
-#endif /* def AMIGA */
-   SHOW_RCS(cgi_h_rcs)
-   SHOW_RCS(cgi_rcs)
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-   SHOW_RCS(cgiedit_h_rcs)
-   SHOW_RCS(cgiedit_rcs)
-#endif /* def FEATURE_CGI_EDIT_ACTIONS */
-   SHOW_RCS(cgisimple_h_rcs)
-   SHOW_RCS(cgisimple_rcs)
-#ifdef __MINGW32__
-   SHOW_RCS(cygwin_h_rcs)
-#endif
-   SHOW_RCS(deanimate_h_rcs)
-   SHOW_RCS(deanimate_rcs)
-   SHOW_RCS(encode_h_rcs)
-   SHOW_RCS(encode_rcs)
-   SHOW_RCS(errlog_h_rcs)
-   SHOW_RCS(errlog_rcs)
-   SHOW_RCS(filters_h_rcs)
-   SHOW_RCS(filters_rcs)
-   SHOW_RCS(gateway_h_rcs)
-   SHOW_RCS(gateway_rcs)
-   SHOW_RCS(jbsockets_h_rcs)
-   SHOW_RCS(jbsockets_rcs)
-   SHOW_RCS(jcc_h_rcs)
-   SHOW_RCS(jcc_rcs)
-   SHOW_RCS(list_h_rcs)
-   SHOW_RCS(list_rcs)
-   SHOW_RCS(loadcfg_h_rcs)
-   SHOW_RCS(loadcfg_rcs)
-   SHOW_RCS(loaders_h_rcs)
-   SHOW_RCS(loaders_rcs)
-   SHOW_RCS(miscutil_h_rcs)
-   SHOW_RCS(miscutil_rcs)
-   SHOW_RCS(parsers_h_rcs)
-   SHOW_RCS(parsers_rcs)
-   SHOW_RCS(pcrs_rcs)
-   SHOW_RCS(pcrs_h_rcs)
-   SHOW_RCS(project_h_rcs)
-   SHOW_RCS(ssplit_h_rcs)
-   SHOW_RCS(ssplit_rcs)
-   SHOW_RCS(urlmatch_h_rcs)
-   SHOW_RCS(urlmatch_rcs)
-#ifdef _WIN32
-#ifndef _WIN_CONSOLE
-   SHOW_RCS(w32log_h_rcs)
-   SHOW_RCS(w32log_rcs)
-   SHOW_RCS(w32res_h_rcs)
-   SHOW_RCS(w32taskbar_h_rcs)
-   SHOW_RCS(w32taskbar_rcs)
-#endif /* ndef _WIN_CONSOLE */
-   SHOW_RCS(win32_h_rcs)
-   SHOW_RCS(win32_rcs)
-#endif /* def _WIN32 */
-
-#undef SHOW_RCS
-
-   return result;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  cgi_show_file
- *
- * Description :  CGI function that shows the content of a
- *                configuration file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  rsp = http_response data structure for output
- *          3  :  parameters = map of cgi parameters
- *
- * CGI Parameters :
- *        file :  Which file to show.  Only first letter is checked,
- *                valid values are:
- *                - "a"ction file
- *                - "r"egex
- *                - "t"rust
- *                Default is to show menu and other information.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.  
- *
- *********************************************************************/
-static jb_err cgi_show_file(struct client_state *csp,
-                            struct http_response *rsp,
-                            const struct map *parameters)
-{
-   unsigned i;
-   const char * filename = NULL;
-   char * file_description = NULL;
-
-   assert(csp);
-   assert(rsp);
-   assert(parameters);
-
-   switch (*(lookup(parameters, "file")))
-   {
-   case 'a':
-      if (!get_number_param(csp, parameters, "index", &i) && i < MAX_AF_FILES && csp->actions_list[i])
-      {
-         filename = csp->actions_list[i]->filename;
-         file_description = "Actions File";
-      }
-      break;
-
-   case 'f':
-      if (!get_number_param(csp, parameters, "index", &i) && i < MAX_AF_FILES && csp->rlist[i])
-      {
-         filename = csp->rlist[i]->filename;
-         file_description = "Filter File";
-      }
-      break;
-
-#ifdef FEATURE_TRUST
-   case 't':
-      if (csp->tlist)
-      {
-         filename = csp->tlist->filename;
-         file_description = "Trust File";
-      }
-      break;
-#endif /* def FEATURE_TRUST */
-   }
-
-   if (NULL != filename)
-   {
-      struct map *exports;
-      char *s;
-      jb_err err;
-      size_t length;
-
-      exports = default_exports(csp, "show-status");
-      if (NULL == exports)
-      {
-         return JB_ERR_MEMORY;
-      }
-
-      if ( map(exports, "file-description", 1, file_description, 1)
-        || map(exports, "filepath", 1, html_encode(filename), 0) )
-      {
-         free_map(exports);
-         return JB_ERR_MEMORY;
-      }
-
-      err = load_file(filename, &s, &length);
-      if (JB_ERR_OK != err)
-      {
-         if (map(exports, "contents", 1, "<h1>ERROR OPENING FILE!</h1>", 1))
-         {
-            free_map(exports);
-            return JB_ERR_MEMORY;
-         }
-      }
-      else
-      {
-         s = html_encode_and_free_original(s);
-         if (NULL == s)
-         {
-            return JB_ERR_MEMORY;
-         }
-
-         if (map(exports, "contents", 1, s, 0))
-         {
-            free_map(exports);
-            return JB_ERR_MEMORY;
-         }
-      }
-
-      return template_fill_for_cgi(csp, "show-status-file", exports, rsp);
-   }
-
-   return JB_ERR_CGI_PARAMS;
-}
-
- 
-/*********************************************************************
- *
- * Function    :  load_file
- *
- * Description :  Loads a file into a buffer.
- *
- * Parameters  :
- *          1  :  filename = Name of the file to be loaded.
- *          2  :  buffer   = Used to return the file's content.
- *          3  :  length   = Used to return the size of the file.
- *
- * Returns     :  JB_ERR_OK in case of success,
- *                JB_ERR_FILE in case of ordinary file loading errors
- *                            (fseek() and ftell() errors are fatal)
- *                JB_ERR_MEMORY in case of out-of-memory.
- *
- *********************************************************************/
-static jb_err load_file(const char *filename, char **buffer, size_t *length)
-{
-   FILE *fp;
-   long ret;
-   jb_err err = JB_ERR_OK;
-
-   fp = fopen(filename, "rb");
-   if (NULL == fp)
-   {
-      return JB_ERR_FILE;
-   }
-
-   /* Get file length */
-   if (fseek(fp, 0, SEEK_END))
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "Unexpected error while fseek()ing to the end of %s: %E",
-         filename);
-   }
-   ret = ftell(fp);
-   if (-1 == ret)
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "Unexpected ftell() error while loading %s: %E",
-         filename);
-   }
-   *length = (size_t)ret;
-
-   /* Go back to the beginning. */
-   if (fseek(fp, 0, SEEK_SET))
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "Unexpected error while fseek()ing to the beginning of %s: %E",
-         filename);
-   }
-
-   *buffer = (char *)zalloc(*length + 1);
-   if (NULL == *buffer)
-   {
-      err = JB_ERR_MEMORY;
-   }
-   else if (!fread(*buffer, *length, 1, fp))
-   {
-      /*
-       * May happen if the file size changes between fseek() and
-       * fread(). If it does, we just log it and serve what we got.
-       */
-      log_error(LOG_LEVEL_ERROR,
-         "Couldn't completely read file %s.", filename);
-      err = JB_ERR_FILE;
-   }
-
-   fclose(fp);
-
-   return err;
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/cgisimple.h b/external/privoxy/cgisimple.h
deleted file mode 100644
index 2bce214..0000000
--- a/external/privoxy/cgisimple.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef CGISIMPLE_H_INCLUDED
-#define CGISIMPLE_H_INCLUDED
-#define CGISIMPLE_H_VERSION "$Id: cgisimple.h,v 1.16 2008/05/26 17:30:55 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cgisimple.h,v $
- *
- * Purpose     :  Declares functions to intercept request, generate
- *                html or gif answers, and to compose HTTP resonses.
- *                
- *                Functions declared include:
- * 
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cgisimple.h,v $
- *    Revision 1.16  2008/05/26 17:30:55  fabiankeil
- *    Provide an OpenSearch Description to access the
- *    show-url-info page through "search engine plugins".
- *
- *    Revision 1.15  2007/01/23 15:51:17  fabiankeil
- *    Add favicon delivery functions.
- *
- *    Revision 1.14  2006/09/06 18:45:03  fabiankeil
- *    Incorporate modified version of Roland Rosenfeld's patch to
- *    optionally access the user-manual via Privoxy. Closes patch 679075.
- *
- *    Formatting changed to Privoxy style, added call to
- *    cgi_error_no_template if the requested file doesn't
- *    exist and modified check whether or not Privoxy itself
- *    should serve the manual. Should work cross-platform now.
- *
- *    Revision 1.13  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.11  2002/04/05 15:50:53  oes
- *    added send-stylesheet CGI
- *
- *    Revision 1.10  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.9  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.8  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.7  2002/03/08 16:43:59  oes
- *    Renamed cgi_transparent_png to cgi_transparent_image
- *
- *    Revision 1.6  2002/03/07 03:48:59  oes
- *     - Changed built-in images from GIF to PNG
- *       (with regard to Unisys patent issue)
- *
- *    Revision 1.5  2002/01/22 23:26:03  jongfoster
- *    Adding cgi_transparent_gif() for http://i.j.b/t
- *
- *    Revision 1.4  2001/10/23 21:48:19  jongfoster
- *    Cleaning up error handling in CGI functions - they now send back
- *    a HTML error page and should never cause a FATAL error.  (Fixes one
- *    potential source of "denial of service" attacks).
- *
- *    CGI actions file editor that works and is actually useful.
- *
- *    Ability to toggle JunkBuster remotely using a CGI call.
- *
- *    You can turn off both the above features in the main configuration
- *    file, e.g. if you are running a multi-user proxy.
- *
- *    Revision 1.3  2001/10/14 22:00:32  jongfoster
- *    Adding support for a 404 error when an invalid CGI page is requested.
- *
- *    Revision 1.2  2001/10/02 15:31:20  oes
- *    Introduced show-request cgi
- *
- *    Revision 1.1  2001/09/16 17:08:54  jongfoster
- *    Moving simple CGI functions from cgi.c to new file cgisimple.c
- *
- *
- **********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * CGI functions
- */
-extern jb_err cgi_default      (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_error_404    (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_robots_txt   (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_send_banner  (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_show_status  (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_show_url_info(struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_show_version (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_show_request (struct client_state *csp,
-                                struct http_response *rsp,
-                                const struct map *parameters);
-extern jb_err cgi_transparent_image (struct client_state *csp,
-                                     struct http_response *rsp,
-                                     const struct map *parameters);
-extern jb_err cgi_send_error_favicon (struct client_state *csp,
-                                      struct http_response *rsp,
-                                      const struct map *parameters);
-extern jb_err cgi_send_default_favicon (struct client_state *csp,
-                                        struct http_response *rsp,
-                                        const struct map *parameters);
-extern jb_err cgi_send_stylesheet(struct client_state *csp,
-                                  struct http_response *rsp,
-                                  const struct map *parameters);
-extern jb_err cgi_send_url_info_osd(struct client_state *csp,
-                                    struct http_response *rsp,
-                                    const struct map *parameters);
-extern jb_err cgi_send_user_manual(struct client_state *csp,
-                                   struct http_response *rsp,
-                                   const struct map *parameters);
-
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-extern jb_err cgi_die (struct client_state *csp,
-                       struct http_response *rsp,
-                       const struct map *parameters);
-#endif
-
-/* Revision control strings from this header and associated .c file */
-extern const char cgisimple_rcs[];
-extern const char cgisimple_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef CGISIMPLE_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/config b/external/privoxy/config
deleted file mode 100644
index 741382a..0000000
--- a/external/privoxy/config
+++ /dev/null
@@ -1,1530 +0,0 @@
-#        Sample Configuration File for Privoxy v3.0.12
-#
-#  $Id: config,v 1.76 2009/03/21 11:51:51 fabiankeil Exp $
-#
-#  Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
-#
-####################################################################
-#                                                                  #
-#                      Table of Contents                           #
-#                                                                  #
-#        I. INTRODUCTION                                           #
-#       II. FORMAT OF THE CONFIGURATION FILE                       #
-#                                                                  #
-#        1. LOCAL SET-UP DOCUMENTATION                             #
-#        2. CONFIGURATION AND LOG FILE LOCATIONS                   #
-#        3. DEBUGGING                                              #
-#        4. ACCESS CONTROL AND SECURITY                            #
-#        5. FORWARDING                                             #
-#        6. WINDOWS GUI OPTIONS                                    #
-#                                                                  #
-####################################################################
-#
-#
-#  I. INTRODUCTION
-#   ===============
-#
-#  This file holds Privoxy's main configuration. Privoxy detects
-#  configuration changes automatically, so you don't have to restart
-#  it unless you want to load a different configuration file.
-#
-#  The configuration will be reloaded with the first request after
-#  the change was done, this request itself will still use the old
-#  configuration, though. In other words: it takes two requests before
-#  you see the result of your changes.  Requests that are dropped due
-#  to ACL don't trigger reloads.
-#
-#  When starting Privoxy on Unix systems, give the location of this
-#  file as last argument. On Windows systems, Privoxy will look for
-#  this file with the name 'config.txt' in the current working directory
-#  of the Privoxy process.
-#
-#
-#  II. FORMAT OF THE CONFIGURATION FILE
-#  ====================================
-#
-#  Configuration lines consist of an initial keyword followed by a
-#  list of values, all separated by whitespace (any number of spaces
-#  or tabs). For example,
-#
-#  actionsfile default.action
-#
-#  Indicates that the actionsfile is named 'default.action'.
-#
-#  The '#' indicates a comment. Any part of a line following a '#'
-#  is ignored, except if the '#' is preceded by a '\'.
-#
-#  Thus, by placing a # at the start of an existing configuration
-#  line, you can make it a comment and it will be treated as if it
-#  weren't there. This is called "commenting out" an option and can
-#  be useful. Removing the # again is called "uncommenting".
-#
-#  Note that commenting out an option and leaving it at its default
-#  are two completely different things! Most options behave very
-#  differently when unset.  See the "Effect if unset" explanation in
-#  each option's description for details.
-#
-#  Long lines can be continued on the next line by using a `\' as the
-#  last character.
-#
-#
-#
-#  1. LOCAL SET-UP DOCUMENTATION
-#  ==============================
-#
-#  If you intend to operate Privoxy for more users than just yourself,
-#  it might be a good idea to let them know how to reach you, what
-#  you block and why you do that, your policies, etc.
-#
-#
-#
-#  1.1. user-manual
-#  =================
-#
-#  Specifies:
-#
-#      Location of the Privoxy User Manual.
-#
-#  Type of value:
-#
-#      A fully qualified URI
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      http://www.privoxy.org/version/user-manual/ will be used,
-#      where version is the Privoxy version.
-#
-#  Notes:
-#
-#      The User Manual URI is the single best source of information on
-#      Privoxy, and is used for help links from some of the internal
-#      CGI pages. The manual itself is normally packaged with the
-#      binary distributions, so you probably want to set this to a
-#      locally installed copy.
-#
-#      Examples:
-#
-#      The best all purpose solution is simply to put the full local
-#      PATH to where the User Manual is located:
-#
-#        user-manual  /usr/share/doc/privoxy/user-manual
-#
-#
-#      The User Manual is then available to anyone with
-#      access to Privoxy, by following the built-in URL:
-#      http://config.privoxy.org/user-manual/ (or the shortcut:
-#      http://p.p/user-manual/).
-#
-#      If the documentation is not on the local system, it can be
-#      accessed from a remote server, as:
-#
-#        user-manual  http://example.com/privoxy/user-manual/
-#
-#
-#      WARNING!!!
-#
-#          If set, this option should be the first option in the config
-#          file, because it is used while the config file is being read.
-#
-#user-manual http://www.privoxy.org/user-manual/
-#
-#
-#  1.2. trust-info-url
-#  ====================
-#
-#  Specifies:
-#
-#      A URL to be displayed in the error page that users will see if
-#      access to an untrusted page is denied.
-#
-#  Type of value:
-#
-#      URL
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No links are displayed on the "untrusted" error page.
-#
-#  Notes:
-#
-#      The value of this option only matters if the experimental trust
-#      mechanism has been activated. (See trustfile below.)
-#
-#      If you use the trust mechanism, it is a good idea to write
-#      up some on-line documentation about your trust policy and to
-#      specify the URL(s) here. Use multiple times for multiple URLs.
-#
-#      The URL(s) should be added to the trustfile as well, so users
-#      don't end up locked out from the information on why they were
-#      locked out in the first place!
-#
-#trust-info-url  http://www.example.com/why_we_block.html
-#trust-info-url  http://www.example.com/what_we_allow.html
-#
-#
-#  1.3. admin-address
-#  ===================
-#
-#  Specifies:
-#
-#      An email address to reach the Privoxy administrator.
-#
-#  Type of value:
-#
-#      Email address
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No email address is displayed on error pages and the CGI user
-#      interface.
-#
-#  Notes:
-#
-#      If both admin-address and proxy-info-url are unset, the whole
-#      "Local Privoxy Support" box on all generated pages will not
-#      be shown.
-#
-#admin-address privoxy-admin@xxxxxxxxxxx
-#
-#
-#  1.4. proxy-info-url
-#  ====================
-#
-#  Specifies:
-#
-#      A URL to documentation about the local Privoxy setup,
-#      configuration or policies.
-#
-#  Type of value:
-#
-#      URL
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No link to local documentation is displayed on error pages and
-#      the CGI user interface.
-#
-#  Notes:
-#
-#      If both admin-address and proxy-info-url are unset, the whole
-#      "Local Privoxy Support" box on all generated pages will not
-#      be shown.
-#
-#      This URL shouldn't be blocked ;-)
-#
-#proxy-info-url http://www.example.com/proxy-service.html
-#
-#
-#  2. CONFIGURATION AND LOG FILE LOCATIONS
-#  ========================================
-#
-#  Privoxy can (and normally does) use a number of other files for
-#  additional configuration, help and logging. This section of the
-#  configuration file tells Privoxy where to find those other files.
-#
-#  The user running Privoxy, must have read permission for all
-#  configuration files, and write permission to any files that would
-#  be modified, such as log files and actions files.
-#
-#
-#
-#  2.1. confdir
-#  =============
-#
-#  Specifies:
-#
-#      The directory where the other configuration files are located.
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      /etc/privoxy (Unix) or Privoxy installation dir (Windows)
-#
-#  Effect if unset:
-#
-#      Mandatory
-#
-#  Notes:
-#
-#      No trailing "/", please.
-#
-confdir .
-#
-#
-#  2.2. templdir
-#  ==============
-#
-#  Specifies:
-#
-#      An alternative directory where the templates are loaded from.
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      unset
-#
-#  Effect if unset:
-#
-#      The templates are assumed to be located in confdir/template.
-#
-#  Notes:
-#
-#      Privoxy's original templates are usually overwritten with each
-#      update. Use this option to relocate customized templates that
-#      should be kept. As template variables might change between
-#      updates, you shouldn't expect templates to work with Privoxy
-#      releases other than the one they were part of, though.
-#
-#templdir .
-#
-#
-#  2.3. logdir
-#  ============
-#
-#  Specifies:
-#
-#      The directory where all logging takes place (i.e. where the
-#      logfile is located).
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
-#
-#  Effect if unset:
-#
-#      Mandatory
-#
-#  Notes:
-#
-#      No trailing "/", please.
-#
-logdir .
-#
-#
-#  2.4. actionsfile
-#  =================
-#
-#  Specifies:
-#
-#      The actions file(s) to use
-#
-#  Type of value:
-#
-#      Complete file name, relative to confdir
-#
-#  Default values:
-#
-#        match-all.action # Actions that are applied to all sites and maybe overruled later on.
-#
-#        default.action   # Main actions file
-#
-#        user.action      # User customizations
-#
-#  Effect if unset:
-#
-#      No actions are taken at all. More or less neutral proxying.
-#
-#  Notes:
-#
-#      Multiple actionsfile lines are permitted, and are in fact
-#      recommended!
-#
-#      The default values are default.action, which is the "main"
-#      actions file maintained by the developers, and user.action,
-#      where you can make your personal additions.
-#
-#      Actions files contain all the per site and per URL configuration
-#      for ad blocking, cookie management, privacy considerations,
-#      etc. There is no point in using Privoxy without at least one
-#      actions file.
-#
-#      Note that since Privoxy 3.0.7, the complete filename, including
-#      the ".action" extension has to be specified. The syntax change
-#      was necessary to be consistent with the other file options and
-#      to allow previously forbidden characters.
-#
-actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.
-actionsfile default.action   # Main actions file
-actionsfile user.action      # User customizations
-#
-#
-#  2.5. filterfile
-#  ================
-#
-#  Specifies:
-#
-#      The filter file(s) to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir
-#
-#  Default value:
-#
-#      default.filter (Unix) or default.filter.txt (Windows)
-#
-#  Effect if unset:
-#
-#      No textual content filtering takes place, i.e. all +filter{name}
-#      actions in the actions files are turned neutral.
-#
-#  Notes:
-#
-#      Multiple filterfile lines are permitted.
-#
-#      The filter files contain content modification rules that use
-#      regular expressions. These rules permit powerful changes on the
-#      content of Web pages, and optionally the headers as well, e.g.,
-#      you could try to disable your favorite JavaScript annoyances,
-#      re-write the actual displayed text, or just have some fun
-#      playing buzzword bingo with web pages.
-#
-#      The +filter{name} actions rely on the relevant filter (name)
-#      to be defined in a filter file!
-#
-#      A pre-defined filter file called default.filter that contains a
-#      number of useful filters for common problems is included in the
-#      distribution. See the section on the filter action for a list.
-#
-#      It is recommended to place any locally adapted filters into a
-#      separate file, such as user.filter.
-#
-filterfile default.filter
-#filterfile user.filter      # User customizations
-#
-#
-#  2.6. logfile
-#  =============
-#
-#  Specifies:
-#
-#      The log file to use
-#
-#  Type of value:
-#
-#      File name, relative to logdir
-#
-#  Default value:
-#
-#      Unset (commented out). When activated: logfile (Unix) or
-#      privoxy.log (Windows).
-#
-#  Effect if unset:
-#
-#      No logfile is written.
-#
-#  Notes:
-#
-#      The logfile is where all logging and error messages are
-#      written. The level of detail and number of messages are set with
-#      the debug option (see below).  The logfile can be useful for
-#      tracking down a problem with Privoxy (e.g., it's not blocking
-#      an ad you think it should block) and it can help you to monitor
-#      what your browser is doing.
-#
-#      Depending on the debug options below, the logfile may be a
-#      privacy risk if third parties can get access to it. As most
-#      users will never look at it, Privoxy 3.0.7 and later only log
-#      fatal errors by default.
-#
-#      For most troubleshooting purposes, you will have to change that,
-#      please refer to the debugging section for details.
-#
-#      Your logfile will grow indefinitely, and you will probably
-#      want to periodically remove it. On Unix systems, you can do
-#      this with a cron job (see "man cron"). For Red Hat based Linux
-#      distributions, a logrotate script has been included.
-#
-#      Any log files must be writable by whatever user Privoxy is
-#      being run as (on Unix, default user id is "privoxy").
-#
-logfile logfile
-#
-#
-#  2.7. trustfile
-#  ===============
-#
-#  Specifies:
-#
-#      The name of the trust file to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir
-#
-#  Default value:
-#
-#      Unset (commented out). When activated: trust (Unix) or trust.txt
-#      (Windows)
-#
-#  Effect if unset:
-#
-#      The entire trust mechanism is disabled.
-#
-#  Notes:
-#
-#      The trust mechanism is an experimental feature for building
-#      white-lists and should be used with care. It is NOT recommended
-#      for the casual user.
-#
-#      If you specify a trust file, Privoxy will only allow access to
-#      sites that are specified in the trustfile. Sites can be listed
-#      in one of two ways:
-#
-#      Prepending a ~ character limits access to this site only (and
-#      any sub-paths within this site), e.g. ~www.example.com allows
-#      access to ~www.example.com/ features/news.html, etc.
-#
-#      Or, you can designate sites as trusted referrers, by prepending
-#      the name with a + character. The effect is that access to
-#      untrusted sites will be granted -- but only if a link from
-#      this trusted referrer was used to get there. The link target
-#      will then be added to the "trustfile" so that future, direct
-#      accesses will be granted. Sites added via this mechanism do
-#      not become trusted referrers themselves (i.e. they are added
-#      with a ~ designation). There is a limit of 512 such entries,
-#      after which new entries will not be made.
-#
-#      If you use the + operator in the trust file, it may grow
-#      considerably over time.
-#
-#      It is recommended that Privoxy be compiled with the
-#      --disable-force, --disable-toggle and --disable-editor options,
-#      if this feature is to be used.
-#
-#      Possible applications include limiting Internet access for
-#      children.
-#
-#trustfile trust
-#
-#
-#  3. DEBUGGING
-#  =============
-#
-#  These options are mainly useful when tracing a problem. Note that
-#  you might also want to invoke Privoxy with the --no-daemon command
-#  line option when debugging.
-#
-#
-#
-#  3.1. debug
-#  ===========
-#
-#  Specifies:
-#
-#      Key values that determine what information gets logged.
-#
-#  Type of value:
-#
-#      Integer values
-#
-#  Default value:
-#
-#      0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)
-#
-#  Effect if unset:
-#
-#      Default value is used (see above).
-#
-#  Notes:
-#
-#      The available debug levels are:
-#
-#        debug         1 # Log the destination for each request Privoxy let through. See also debug 1024.
-#        debug         2 # show each connection status
-#        debug         4 # show I/O status
-#        debug         8 # show header parsing
-#        debug        16 # log all data written to the network into the logfile
-#        debug        32 # debug force feature
-#        debug        64 # debug regular expression filters
-#        debug       128 # debug redirects
-#        debug       256 # debug GIF de-animation
-#        debug       512 # Common Log Format
-#        debug      1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
-#        debug      2048 # CGI user interface
-#        debug      4096 # Startup banner and warnings.
-#        debug      8192 # Non-fatal errors
-#
-#
-#      To select multiple debug levels, you can either add them or
-#      use multiple debug lines.
-#
-#      A debug level of 1 is informative because it will show you each
-#      request as it happens. 1, 4096 and 8192 are recommended so that
-#      you will notice when things go wrong. The other levels are
-#      probably only of interest if you are hunting down a specific
-#      problem. They can produce a hell of an output (especially 16).
-#
-#      Privoxy used to ship with the debug levels recommended above
-#      enabled by default, but due to privacy concerns 3.0.7 and later
-#      are configured to only log fatal errors.
-#
-#      If you are used to the more verbose settings, simply enable
-#      the debug lines below again.
-#
-#      If you want to use pure CLF (Common Log Format), you should set
-#      "debug 512" ONLY and not enable anything else.
-#
-#      Privoxy has a hard-coded limit for the length of log messages. If
-#      it's reached, messages are logged truncated and marked with
-#      "... [too long, truncated]".
-#
-#      Please don't file any support requests without trying to
-#      reproduce the problem with increased debug level first. Once
-#      you read the log messages, you may even be able to solve the
-#      problem on your own.
-#
-#debug      1 # Log the destination for each request Privoxy let through.
-#debug   1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
-#debug   4096 # Startup banner and warnings
-#debug   8192 # Non-fatal errors
-#
-#
-#  3.2. single-threaded
-#  =====================
-#
-#  Specifies:
-#
-#      Whether to run only one server thread.
-#
-#  Type of value:
-#
-#      None
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Multi-threaded (or, where unavailable: forked) operation,
-#      i.e. the ability to serve multiple requests simultaneously.
-#
-#  Notes:
-#
-#      This option is only there for debugging purposes. It will
-#      drastically reduce performance.
-#
-#single-threaded
-#
-#
-#  3.3. hostname
-#  ==============
-#
-#  Specifies:
-#
-#      The hostname shown on the CGI pages.
-#
-#  Type of value:
-#
-#      Text
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      The hostname provided by the operating system is used.
-#
-#  Notes:
-#
-#      On some misconfigured systems resolving the hostname fails or
-#      takes too much time and slows Privoxy down. Setting a fixed
-#      hostname works around the problem.
-#
-#      In other circumstances it might be desirable to show a hostname
-#      other than the one returned by the operating system. For example
-#      if the system has several different hostnames and you don't
-#      want to use the first one.
-#
-#      Note that Privoxy does not validate the specified hostname value.
-#
-#hostname hostname.example.org
-#
-#
-#  4. ACCESS CONTROL AND SECURITY
-#  ===============================
-#
-#  This section of the config file controls the security-relevant
-#  aspects of Privoxy's configuration.
-#
-#
-#
-#  4.1. listen-address
-#  ====================
-#
-#  Specifies:
-#
-#      The IP address and TCP port on which Privoxy will listen for
-#      client requests.
-#
-#  Type of value:
-#
-#      [IP-Address]:Port
-#
-#  Default value:
-#
-#      127.0.0.1:8118
-#
-#  Effect if unset:
-#
-#      Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
-#      recommended for home users who run Privoxy on the same machine
-#      as their browser.
-#
-#  Notes:
-#
-#      You will need to configure your browser(s) to this proxy address
-#      and port.
-#
-#      If you already have another service running on port 8118, or
-#      if you want to serve requests from other machines (e.g. on your
-#      local network) as well, you will need to override the default.
-#
-#      If you leave out the IP address, Privoxy will bind to all
-#      interfaces (addresses) on your machine and may become reachable
-#      from the Internet. In that case, consider using access control
-#      lists (ACL's, see below), and/or a firewall.
-#
-#      If you open Privoxy to untrusted users, you will also
-#      want to make sure that the following actions are disabled:
-#      enable-edit-actions and enable-remote-toggle
-#
-#  Example:
-#
-#      Suppose you are running Privoxy on a machine which has the
-#      address 192.168.0.1 on your local private network (192.168.0.0)
-#      and has another outside connection with a different address. You
-#      want it to serve requests from inside only:
-#
-#        listen-address  192.168.0.1:8118
-#
-#
-listen-address  127.0.0.1:8118
-#
-#
-#  4.2. toggle
-#  ============
-#
-#  Specifies:
-#
-#      Initial state of "toggle" status
-#
-#  Type of value:
-#
-#      1 or 0
-#
-#  Default value:
-#
-#      1
-#
-#  Effect if unset:
-#
-#      Act as if toggled on
-#
-#  Notes:
-#
-#      If set to 0, Privoxy will start in "toggled off" mode,
-#      i.e. mostly behave like a normal, content-neutral proxy
-#      with both ad blocking and content filtering disabled. See
-#      enable-remote-toggle below.
-#
-#      The windows version will only display the toggle icon in the
-#      system tray if this option is present.
-#
-toggle  1
-#
-#
-#  4.3. enable-remote-toggle
-#  ==========================
-#
-#  Specifies:
-#
-#      Whether or not the web-based toggle feature may be used
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      The web-based toggle feature is disabled.
-#
-#  Notes:
-#
-#      When toggled off, Privoxy mostly acts like a normal,
-#      content-neutral proxy, i.e. doesn't block ads or filter content.
-#
-#      Access to the toggle feature can not be controlled separately by
-#      "ACLs" or HTTP authentication, so that everybody who can access
-#      Privoxy (see "ACLs" and listen-address above) can toggle it
-#      for all users. So this option is not recommended for multi-user
-#      environments with untrusted users.
-#
-#      Note that malicious client side code (e.g Java) is also capable
-#      of using this option.
-#
-#      As a lot of Privoxy users don't read documentation, this feature
-#      is disabled by default.
-#
-#      Note that you must have compiled Privoxy with support for this
-#      feature, otherwise this option has no effect.
-#
-enable-remote-toggle  0
-#
-#
-#  4.4. enable-remote-http-toggle
-#  ===============================
-#
-#  Specifies:
-#
-#      Whether or not Privoxy recognizes special HTTP headers to change
-#      its behaviour.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Privoxy ignores special HTTP headers.
-#
-#  Notes:
-#
-#      When toggled on, the client can change Privoxy's behaviour by
-#      setting special HTTP headers. Currently the only supported
-#      special header is "X-Filter: No", to disable filtering for
-#      the ongoing request, even if it is enabled in one of the
-#      action files.
-#
-#      This feature is disabled by default. If you are using Privoxy in
-#      a environment with trusted clients, you may enable this feature
-#      at your discretion. Note that malicious client side code (e.g
-#      Java) is also capable of using this feature.
-#
-#      This option will be removed in future releases as it has been
-#      obsoleted by the more general header taggers.
-#
-enable-remote-http-toggle  0
-#
-#
-#  4.5. enable-edit-actions
-#  =========================
-#
-#  Specifies:
-#
-#      Whether or not the web-based actions file editor may be used
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      The web-based actions file editor is disabled.
-#
-#  Notes:
-#
-#      Access to the editor can not be controlled separately by
-#      "ACLs" or HTTP authentication, so that everybody who can access
-#      Privoxy (see "ACLs" and listen-address above) can modify its
-#      configuration for all users.
-#
-#      This option is not recommended for environments with untrusted
-#      users and as a lot of Privoxy users don't read documentation,
-#      this feature is disabled by default.
-#
-#      Note that malicious client side code (e.g Java) is also capable
-#      of using the actions editor and you shouldn't enable this
-#      options unless you understand the consequences and are sure
-#      your browser is configured correctly.
-#
-#      Note that you must have compiled Privoxy with support for this
-#      feature, otherwise this option has no effect.
-#
-enable-edit-actions 0
-#
-#
-#  4.6. enforce-blocks
-#  ====================
-#
-#  Specifies:
-#
-#      Whether the user is allowed to ignore blocks and can "go there
-#      anyway".
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Blocks are not enforced.
-#
-#  Notes:
-#
-#      Privoxy is mainly used to block and filter requests as a service
-#      to the user, for example to block ads and other junk that clogs
-#      the pipes.  Privoxy's configuration isn't perfect and sometimes
-#      innocent pages are blocked. In this situation it makes sense to
-#      allow the user to enforce the request and have Privoxy ignore
-#      the block.
-#
-#      In the default configuration Privoxy's "Blocked" page contains
-#      a "go there anyway" link to adds a special string (the force
-#      prefix) to the request URL. If that link is used, Privoxy
-#      will detect the force prefix, remove it again and let the
-#      request pass.
-#
-#      Of course Privoxy can also be used to enforce a network
-#      policy. In that case the user obviously should not be able to
-#      bypass any blocks, and that's what the "enforce-blocks" option
-#      is for. If it's enabled, Privoxy hides the "go there anyway"
-#      link. If the user adds the force prefix by hand, it will not
-#      be accepted and the circumvention attempt is logged.
-#
-#  Examples:
-#
-#      enforce-blocks 1
-#
-enforce-blocks 0
-#
-#
-#  4.7. ACLs: permit-access and deny-access
-#  =========================================
-#
-#  Specifies:
-#
-#      Who can access what.
-#
-#  Type of value:
-#
-#      src_addr[/src_masklen] [dst_addr[/dst_masklen]]
-#
-#      Where src_addr and dst_addr are IP addresses in dotted decimal
-#      notation or valid DNS names, and src_masklen and dst_masklen are
-#      subnet masks in CIDR notation, i.e. integer values from 2 to 30
-#      representing the length (in bits) of the network address. The
-#      masks and the whole destination part are optional.
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't restrict access further than implied by listen-address
-#
-#  Notes:
-#
-#      Access controls are included at the request of ISPs and systems
-#      administrators, and are not usually needed by individual
-#      users. For a typical home user, it will normally suffice to
-#      ensure that Privoxy only listens on the localhost (127.0.0.1)
-#      or internal (home) network address by means of the listen-address
-#      option.
-#
-#      Please see the warnings in the FAQ that Privoxy is not intended
-#      to be a substitute for a firewall or to encourage anyone to
-#      defer addressing basic security weaknesses.
-#
-#      Multiple ACL lines are OK. If any ACLs are specified, Privoxy
-#      only talks to IP addresses that match at least one permit-access
-#      line and don't match any subsequent deny-access line. In other
-#      words, the last match wins, with the default being deny-access.
-#
-#      If Privoxy is using a forwarder (see forward below) for a
-#      particular destination URL, the dst_addr that is examined is
-#      the address of the forwarder and NOT the address of the ultimate
-#      target. This is necessary because it may be impossible for the
-#      local Privoxy to determine the IP address of the ultimate target
-#      (that's often what gateways are used for).
-#
-#      You should prefer using IP addresses over DNS names, because
-#      the address lookups take time. All DNS names must resolve! You
-#      can not use domain patterns like "*.org" or partial domain
-#      names. If a DNS name resolves to multiple IP addresses, only
-#      the first one is used.
-#
-#      Denying access to particular sites by ACL may have undesired
-#      side effects if the site in question is hosted on a machine
-#      which also hosts other sites (most sites are).
-#
-#  Examples:
-#
-#      Explicitly define the default behavior if no ACL and
-#      listen-address are set: "localhost" is OK. The absence of a
-#      dst_addr implies that all destination addresses are OK:
-#
-#        permit-access  localhost
-#
-#
-#      Allow any host on the same class C subnet as www.privoxy.org
-#      access to nothing but www.example.com (or other domains hosted
-#      on the same system):
-#
-#        permit-access  www.privoxy.org/24 www.example.com/32
-#
-#
-#      Allow access from any host on the 26-bit subnet 192.168.45.64 to
-#      anywhere, with the exception that 192.168.45.73 may not access
-#      the IP address behind www.dirty-stuff.example.com:
-#
-#        permit-access  192.168.45.64/26 
-#        deny-access   192.168.45.73  www.dirty-stuff.example.com
-#
-#
-#
-#  4.8. buffer-limit
-#  ==================
-#
-#  Specifies:
-#
-#      Maximum size of the buffer for content filtering.
-#
-#  Type of value:
-#
-#      Size in Kbytes
-#
-#  Default value:
-#
-#      4096
-#
-#  Effect if unset:
-#
-#      Use a 4MB (4096 KB) limit.
-#
-#  Notes:
-#
-#      For content filtering, i.e. the +filter and +deanimate-gif
-#      actions, it is necessary that Privoxy buffers the entire document
-#      body. This can be potentially dangerous, since a server could
-#      just keep sending data indefinitely and wait for your RAM to
-#      exhaust -- with nasty consequences.  Hence this option.
-#
-#      When a document buffer size reaches the buffer-limit, it is
-#      flushed to the client unfiltered and no further attempt to filter
-#      the rest of the document is made. Remember that there may be
-#      multiple threads running, which might require up to buffer-limit
-#      Kbytes each, unless you have enabled "single-threaded" above.
-#
-buffer-limit 4096
-#
-#
-#  5. FORWARDING
-#  ==============
-#
-#  This feature allows routing of HTTP requests through a chain of
-#  multiple proxies.
-#
-#  Forwarding can be used to chain Privoxy with a caching proxy to
-#  speed up browsing. Using a parent proxy may also be necessary if
-#  the machine that Privoxy runs on has no direct Internet access.
-#
-#  Note that parent proxies can severely decrease your privacy
-#  level. For example a parent proxy could add your IP address to the
-#  request headers and if it's a caching proxy it may add the "Etag"
-#  header to revalidation requests again, even though you configured
-#  Privoxy to remove it. It may also ignore Privoxy's header time
-#  randomization and use the original values which could be used by
-#  the server as cookie replacement to track your steps between visits.
-#
-#  Also specified here are SOCKS proxies. Privoxy supports the SOCKS
-#  4 and SOCKS 4A protocols.
-#
-#
-#
-#  5.1. forward
-#  =============
-#
-#  Specifies:
-#
-#      To which parent HTTP proxy specific requests should be routed.
-#
-#  Type of value:
-#
-#      target_pattern http_parent[:port]
-#
-#      where target_pattern is a URL pattern that specifies to which
-#      requests (i.e. URLs) this forward rule shall apply. Use /
-#      to denote "all URLs".  http_parent[:port] is the DNS name or
-#      IP address of the parent HTTP proxy through which the requests
-#      should be forwarded, optionally followed by its listening port
-#      (default: 8080). Use a single dot (.) to denote "no forwarding".
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't use parent HTTP proxies.
-#
-#  Notes:
-#
-#      If http_parent is ".", then requests are not forwarded to
-#      another HTTP proxy but are made directly to the web servers.
-#
-#      Multiple lines are OK, they are checked in sequence, and the
-#      last match wins.
-#
-#  Examples:
-#
-#      Everything goes to an example parent proxy, except SSL on port
-#      443 (which it doesn't handle):
-#
-#        forward   /      parent-proxy.example.org:8080 
-#        forward   :443   .
-#
-#
-#      Everything goes to our example ISP's caching proxy, except for
-#      requests to that ISP's sites:
-#
-#        forward   /                  caching-proxy.isp.example.net:8000
-#        forward   .isp.example.net   .
-#
-#
-#
-#
-#  5.2. forward-socks4, forward-socks4a and forward-socks5
-#  ========================================================
-#
-#  Specifies:
-#
-#      Through which SOCKS proxy (and optionally to which parent HTTP
-#      proxy) specific requests should be routed.
-#
-#  Type of value:
-#
-#      target_pattern socks_proxy[:port] http_parent[:port]
-#
-#      where target_pattern is a URL pattern that specifies to which
-#      requests (i.e. URLs) this forward rule shall apply. Use / to
-#      denote "all URLs".  http_parent and socks_proxy are IP addresses
-#      in dotted decimal notation or valid DNS names (http_parent may
-#      be "." to denote "no HTTP forwarding"), and the optional port
-#      parameters are TCP ports, i.e. integer values from 1 to 65535
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't use SOCKS proxies.
-#
-#  Notes:
-#
-#      Multiple lines are OK, they are checked in sequence, and the
-#      last match wins.
-#
-#      The difference between forward-socks4 and forward-socks4a
-#      is that in the SOCKS 4A protocol, the DNS resolution of the
-#      target hostname happens on the SOCKS server, while in SOCKS 4
-#      it happens locally.
-#
-#      With forward-socks5 the DNS resolution will happen on the remote
-#      server as well.
-#
-#      If http_parent is ".", then requests are not forwarded to another
-#      HTTP proxy but are made (HTTP-wise) directly to the web servers,
-#      albeit through a SOCKS proxy.
-#
-#  Examples:
-#
-#      From the company example.com, direct connections are made to all
-#      "internal" domains, but everything outbound goes through their
-#      ISP's proxy by way of example.com's corporate SOCKS 4A gateway
-#      to the Internet.
-#
-#        forward-socks4a   /       socks-gw.example.com:1080    www-cache.isp.example.net:8080 
-#        forward           .example.com        .
-#
-#
-#      A rule that uses a SOCKS 4 gateway for all destinations but no
-#      HTTP parent looks like this:
-#
-#        forward-socks4   /               socks-gw.example.com:1080  .
-#
-#
-#      To chain Privoxy and Tor, both running on the same system,
-#      you would use something like:
-#
-#        forward-socks4a   /               127.0.0.1:9050 .
-#
-#
-#      The public Tor network can't be used to reach your local network,
-#      if you need to access local servers you therefore might want
-#      to make some exceptions:
-#
-#        forward         192.168.*.*/     .  
-#        forward         10.*.*.*/        .  
-#        forward         127.*.*.*/       .
-#
-#
-#      Unencrypted connections to systems in these address ranges will
-#      be as (un) secure as the local network is, but the alternative
-#      is that you can't reach the local network through Privoxy at
-#      all. Of course this may actually be desired and there is no
-#      reason to make these exceptions if you aren't sure you need them.
-#
-#      If you also want to be able to reach servers in your local
-#      network by using their names, you will need additional exceptions
-#      that look like this:
-#
-#       forward           localhost/     .
-#
-#
-#
-#
-#  5.3. forwarded-connect-retries
-#  ===============================
-#
-#  Specifies:
-#
-#      How often Privoxy retries if a forwarded connection request
-#      fails.
-#
-#  Type of value:
-#
-#      Number of retries.
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Connections forwarded through other proxies are treated like
-#      direct connections and no retry attempts are made.
-#
-#  Notes:
-#
-#      forwarded-connect-retries is mainly interesting for socks4a
-#      connections, where Privoxy can't detect why the connections
-#      failed. The connection might have failed because of a DNS timeout
-#      in which case a retry makes sense, but it might also have failed
-#      because the server doesn't exist or isn't reachable. In this
-#      case the retry will just delay the appearance of Privoxy's
-#      error message.
-#
-#      Note that in the context of this option, "forwarded connections"
-#      includes all connections that Privoxy forwards through other
-#      proxies. This option is not limited to the HTTP CONNECT method.
-#
-#      Only use this option, if you are getting lots of
-#      forwarding-related error messages that go away when you try again
-#      manually. Start with a small value and check Privoxy's logfile
-#      from time to time, to see how many retries are usually needed.
-#
-#  Examples:
-#
-#      forwarded-connect-retries 1
-#
-forwarded-connect-retries  0
-#
-#
-#  5.4. accept-intercepted-requests
-#  =================================
-#
-#  Specifies:
-#
-#      Whether intercepted requests should be treated as valid.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Only proxy requests are accepted, intercepted requests are
-#      treated as invalid.
-#
-#  Notes:
-#
-#      If you don't trust your clients and want to force them to use
-#      Privoxy, enable this option and configure your packet filter
-#      to redirect outgoing HTTP connections into Privoxy.
-#
-#      Make sure that Privoxy's own requests aren't redirected as well.
-#      Additionally take care that Privoxy can't intentionally connect
-#      to itself, otherwise you could run into redirection loops if
-#      Privoxy's listening port is reachable by the outside or an
-#      attacker has access to the pages you visit.
-#
-#  Examples:
-#
-#      accept-intercepted-requests 1
-#
-accept-intercepted-requests 0
-#
-#
-#  5.5. allow-cgi-request-crunching
-#  =================================
-#
-#  Specifies:
-#
-#      Whether requests to Privoxy's CGI pages can be blocked or
-#      redirected.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Privoxy ignores block and redirect actions for its CGI pages.
-#
-#  Notes:
-#
-#      By default Privoxy ignores block or redirect actions for
-#      its CGI pages.  Intercepting these requests can be useful in
-#      multi-user setups to implement fine-grained access control,
-#      but it can also render the complete web interface useless and
-#      make debugging problems painful if done without care.
-#
-#      Don't enable this option unless you're sure that you really
-#      need it.
-#
-#  Examples:
-#
-#      allow-cgi-request-crunching 1
-#
-allow-cgi-request-crunching 0
-#
-#
-#  5.6. split-large-forms
-#  =======================
-#
-#  Specifies:
-#
-#      Whether the CGI interface should stay compatible with broken
-#      HTTP clients.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      The CGI form generate long GET URLs.
-#
-#  Notes:
-#
-#      Privoxy's CGI forms can lead to rather long URLs. This isn't
-#      a problem as far as the HTTP standard is concerned, but it can
-#      confuse clients with arbitrary URL length limitations.
-#
-#      Enabling split-large-forms causes Privoxy to divide big forms
-#      into smaller ones to keep the URL length down. It makes editing
-#      a lot less convenient and you can no longer submit all changes
-#      at once, but at least it works around this browser bug.
-#
-#      If you don't notice any editing problems, there is no reason
-#      to enable this option, but if one of the submit buttons appears
-#      to be broken, you should give it a try.
-#
-#  Examples:
-#
-#      split-large-forms 1
-#
-split-large-forms 0
-#
-#
-#  5.7. keep-alive-timeout
-#  ========================
-#
-#  Specifies:
-#
-#      Number of seconds after which an open connection will no longer
-#      be reused.
-#
-#  Type of value:
-#
-#      Time in seconds.
-#
-#  Default value:
-#
-#      None
-#
-#  Effect if unset:
-#
-#      Connections are not reused.
-#
-#  Notes:
-#
-#      This option has no effect if Privoxy has been compiled without
-#      keep-alive support.
-#
-#  Notes:
-#
-#      Note that reusing connections doesn't necessary cause
-#      speedups. There are also a few privacy implications you should
-#      be aware of.
-#
-#      Outgoing connections are shared between clients (if there are
-#      more than one) and closing the client that initiated the outgoing
-#      connection does not affect the connection between Privoxy and
-#      the server unless the client's request hasn't been completed
-#      yet. If the outgoing connection is idle, it will not be closed
-#      until either Privoxy's or the server's timeout is reached. While
-#      it's open, the server knows that the system running Privoxy is
-#      still there.
-#
-#  Examples:
-#
-#      keep-alive-timeout 300
-#
-keep-alive-timeout 300
-#
-#
-#  5.8. socket-timeout
-#  ====================
-#
-#  Specifies:
-#
-#      Number of seconds after which a socket times out if no data
-#      is received.
-#
-#  Type of value:
-#
-#      Time in seconds.
-#
-#  Default value:
-#
-#      None
-#
-#  Effect if unset:
-#
-#      A default value of 300 seconds is used.
-#
-#  Notes:
-#
-#      For SOCKS requests the timeout currently doesn't start until
-#      the SOCKS server accepted the request. This will be fixed in
-#      the next release.
-#
-#  Examples:
-#
-#      socket-timeout 300
-#
-socket-timeout 300
-#
-#
-#  6. WINDOWS GUI OPTIONS
-#  =======================
-#
-#  Privoxy has a number of options specific to the Windows GUI
-#  interface:
-#
-#
-#  If "activity-animation" is set to 1, the Privoxy icon will animate
-#  when "Privoxy" is active. To turn off, set to 0.
-#
-#activity-animation   1
-#
-#  If "log-messages" is set to 1, Privoxy will log messages to the
-#  console window:
-#
-#log-messages   1
-#
-#  If "log-buffer-size" is set to 1, the size of the log buffer,
-#  i.e. the amount of memory used for the log messages displayed in
-#  the console window, will be limited to "log-max-lines" (see below).
-#
-#  Warning: Setting this to 0 will result in the buffer to grow
-#  infinitely and eat up all your memory!
-#
-#log-buffer-size 1
-#
-#  log-max-lines is the maximum number of lines held in the log
-#  buffer. See above.
-#
-#log-max-lines 200
-#
-#  If "log-highlight-messages" is set to 1, Privoxy will highlight
-#  portions of the log messages with a bold-faced font:
-#
-#log-highlight-messages 1
-#
-#  The font used in the console window:
-#
-#log-font-name Comic Sans MS
-#
-#  Font size used in the console window:
-#
-#log-font-size 8
-#
-#  "show-on-task-bar" controls whether or not Privoxy will appear as
-#  a button on the Task bar when minimized:
-#
-#show-on-task-bar 0
-#
-#  If "close-button-minimizes" is set to 1, the Windows close button
-#  will minimize Privoxy instead of closing the program (close with
-#  the exit option on the File menu).
-#
-#close-button-minimizes 1
-#
-#  The "hide-console" option is specific to the MS-Win console version
-#  of Privoxy.  If this option is used, Privoxy will disconnect from
-#  and hide the command console.
-#
-#hide-console
-#
-#
diff --git a/external/privoxy/config.guess b/external/privoxy/config.guess
deleted file mode 100644
index d622a44..0000000
--- a/external/privoxy/config.guess
+++ /dev/null
@@ -1,1530 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-02-10'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@xxxxxxx> and include a ChangeLog
-# entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@xxxxxxx>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@xxxxxxxxxxxxxxx 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep -q __ELF__
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-		os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    *:MirBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
-	exitcode=$?
-	trap '' 0
-	exit $exitcode ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-	echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@xxxxxxxxxxxxxxxxxxxx (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    s390x:SunOS:*:*)
-	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-	echo i386-pc-auroraux${UNAME_RELEASE}
-	exit ;;
-    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval $set_cc_for_build
-	SUN_ARCH="i386"
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH="x86_64"
-	    fi
-	fi
-	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-	echo m68k-milan-mint${UNAME_RELEASE}
-	exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-	echo m68k-hades-mint${UNAME_RELEASE}
-	exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-	echo m68k-unknown-mint${UNAME_RELEASE}
-	exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten${UNAME_RELEASE}
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c &&
-	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`$dummy $dummyarg` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-	# DG/UX returns AViiON for all architectures
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
-	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[4567])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-		    case "${sc_cpu_version}" in
-		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-		      532)                      # CPU_PA_RISC2_0
-			case "${sc_kernel_bits}" in
-			  32) HP_ARCH="hppa2.0n" ;;
-			  64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-			esac ;;
-		    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^		//' << EOF >$dummy.c
-
-		#define _HPUX_SOURCE
-		#include <stdlib.h>
-		#include <unistd.h>
-
-		int main ()
-		{
-		#if defined(_SC_KERNEL_BITS)
-		    long bits = sysconf(_SC_KERNEL_BITS);
-		#endif
-		    long cpu  = sysconf (_SC_CPU_VERSION);
-
-		    switch (cpu)
-			{
-			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-			case CPU_PA_RISC2_0:
-		#if defined(_SC_KERNEL_BITS)
-			    switch (bits)
-				{
-				case 64: puts ("hppa2.0w"); break;
-				case 32: puts ("hppa2.0n"); break;
-				default: puts ("hppa2.0"); break;
-				} break;
-		#else  /* !defined(_SC_KERNEL_BITS) */
-			    puts ("hppa2.0"); break;
-		#endif
-			default: puts ("hppa1.0"); break;
-			}
-		    exit (0);
-		}
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    eval $set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep -q __LP64__
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-	exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-	exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-	exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-	exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:FreeBSD:*:*)
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	case ${UNAME_PROCESSOR} in
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
-	exit ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit ;;
-    *:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:MSYS*:*)
-	echo ${UNAME_MACHINE}-pc-msys
-	exit ;;
-    i*:windows32*:*)
-	# uname -m includes "-pc" on this system.
-	echo ${UNAME_MACHINE}-mingw32
-	exit ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit ;;
-    *:Interix*:*)
-	case ${UNAME_MACHINE} in
-	    x86)
-		echo i586-pc-interix${UNAME_RELEASE}
-		exit ;;
-	    authenticamd | genuineintel | EM64T)
-		echo x86_64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	    IA64)
-		echo ia64-unknown-interix${UNAME_RELEASE}
-		exit ;;
-	esac ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit ;;
-    8664:Windows_NT:*)
-	echo x86_64-pc-mks
-	exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit ;;
-    aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    aarch64_be:Linux:*:*)
-	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-	esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit ;;
-    arm*:Linux:*:*)
-	eval $set_cc_for_build
-	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
-	    | grep -q __ARM_EABI__
-	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
-	else
-	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
-		| grep -q __ARM_PCS_VFP
-	    then
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
-	    else
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
-	    fi
-	fi
-	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
-	exit ;;
-    crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
-	exit ;;
-    frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    i*86:Linux:*:*)
-	LIBC=gnu
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-	exit ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    mips:Linux:*:* | mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef ${UNAME_MACHINE}
-	#undef ${UNAME_MACHINE}el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=${UNAME_MACHINE}el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=${UNAME_MACHINE}
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    or32:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit ;;
-    sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
-    x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-	# Unixware is an offshoot of SVR4, but it has its own version
-	# number series starting with 2...
-	# I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-	# Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-	# uname -m prints for DJGPP always 'pc', but it prints nothing about
-	# the processor, so we play safe by assuming i586.
-	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configury will decide that
-	# this is a cross-build.
-	echo i586-pc-msdosdjgpp
-	exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-			# says <Richard.M.Bartel@xxxxxxxxxxxxxxxxx>
-	echo i586-unisys-sysv4
-	exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@xxxxxxxxxxxxxx>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@xxxxxxxxxxxxxxxxx
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@xxxxxxxxxxxx
-	echo ${UNAME_MACHINE}-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@xxxxxxxxxxxx
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-		echo mips-nec-sysv${UNAME_RELEASE}
-	else
-		echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-	exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
-	echo i586-pc-haiku
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux${UNAME_RELEASE}
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    i386)
-		eval $set_cc_for_build
-		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		      grep IS_64BIT_ARCH >/dev/null
-		  then
-		      UNAME_PROCESSOR="x86_64"
-		  fi
-		fi ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NEO-?:NONSTOP_KERNEL:*:*)
-	echo neo-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-	echo mips-sei-seiux${UNAME_RELEASE}
-	exit ;;
-    *:DragonFly:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit ;;
-    *:*VMS:*:*)
-	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
-    i*86:AROS:*:*)
-	echo ${UNAME_MACHINE}-pc-aros
-	exit ;;
-    x86_64:VMkernel:*:*)
-	echo ${UNAME_MACHINE}-unknown-esx
-	exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@xxxxxxx> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/external/privoxy/config.orig b/external/privoxy/config.orig
deleted file mode 100644
index 176dd5f..0000000
--- a/external/privoxy/config.orig
+++ /dev/null
@@ -1,1530 +0,0 @@
-#        Sample Configuration File for Privoxy v3.0.12
-#
-#  $Id: config,v 1.75 2009/03/21 11:35:37 hal9 Exp $
-#
-#  Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
-#
-####################################################################
-#                                                                  #
-#                      Table of Contents                           #
-#                                                                  #
-#        I. INTRODUCTION                                           #
-#       II. FORMAT OF THE CONFIGURATION FILE                       #
-#                                                                  #
-#        1. LOCAL SET-UP DOCUMENTATION                             #
-#        2. CONFIGURATION AND LOG FILE LOCATIONS                   #
-#        3. DEBUGGING                                              #
-#        4. ACCESS CONTROL AND SECURITY                            #
-#        5. FORWARDING                                             #
-#        6. WINDOWS GUI OPTIONS                                    #
-#                                                                  #
-####################################################################
-#
-#
-#  I. INTRODUCTION
-#   ===============
-#
-#  This file holds Privoxy's main configuration. Privoxy detects
-#  configuration changes automatically, so you don't have to restart
-#  it unless you want to load a different configuration file.
-#
-#  The configuration will be reloaded with the first request after
-#  the change was done, this request itself will still use the old
-#  configuration, though. In other words: it takes two requests before
-#  you see the result of your changes.  Requests that are dropped due
-#  to ACL don't trigger reloads.
-#
-#  When starting Privoxy on Unix systems, give the location of this
-#  file as last argument. On Windows systems, Privoxy will look for
-#  this file with the name 'config.txt' in the current working directory
-#  of the Privoxy process.
-#
-#
-#  II. FORMAT OF THE CONFIGURATION FILE
-#  ====================================
-#
-#  Configuration lines consist of an initial keyword followed by a
-#  list of values, all separated by whitespace (any number of spaces
-#  or tabs). For example,
-#
-#  actionsfile default.action
-#
-#  Indicates that the actionsfile is named 'default.action'.
-#
-#  The '#' indicates a comment. Any part of a line following a '#'
-#  is ignored, except if the '#' is preceded by a '\'.
-#
-#  Thus, by placing a # at the start of an existing configuration
-#  line, you can make it a comment and it will be treated as if it
-#  weren't there. This is called "commenting out" an option and can
-#  be useful. Removing the # again is called "uncommenting".
-#
-#  Note that commenting out an option and leaving it at its default
-#  are two completely different things! Most options behave very
-#  differently when unset.  See the "Effect if unset" explanation in
-#  each option's description for details.
-#
-#  Long lines can be continued on the next line by using a `\' as the
-#  last character.
-#
-#
-#
-#  1. LOCAL SET-UP DOCUMENTATION
-#  ==============================
-#
-#  If you intend to operate Privoxy for more users than just yourself,
-#  it might be a good idea to let them know how to reach you, what
-#  you block and why you do that, your policies, etc.
-#
-#
-#
-#  1.1. user-manual
-#  =================
-#
-#  Specifies:
-#
-#      Location of the Privoxy User Manual.
-#
-#  Type of value:
-#
-#      A fully qualified URI
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      http://www.privoxy.org/version/user-manual/ will be used,
-#      where version is the Privoxy version.
-#
-#  Notes:
-#
-#      The User Manual URI is the single best source of information on
-#      Privoxy, and is used for help links from some of the internal
-#      CGI pages. The manual itself is normally packaged with the
-#      binary distributions, so you probably want to set this to a
-#      locally installed copy.
-#
-#      Examples:
-#
-#      The best all purpose solution is simply to put the full local
-#      PATH to where the User Manual is located:
-#
-#        user-manual  /usr/share/doc/privoxy/user-manual
-#
-#
-#      The User Manual is then available to anyone with
-#      access to Privoxy, by following the built-in URL:
-#      http://config.privoxy.org/user-manual/ (or the shortcut:
-#      http://p.p/user-manual/).
-#
-#      If the documentation is not on the local system, it can be
-#      accessed from a remote server, as:
-#
-#        user-manual  http://example.com/privoxy/user-manual/
-#
-#
-#      WARNING!!!
-#
-#          If set, this option should be the first option in the config
-#          file, because it is used while the config file is being read.
-#
-user-manual /home/halb/privoxy/share/doc/privoxy/user-manual/
-#
-#
-#  1.2. trust-info-url
-#  ====================
-#
-#  Specifies:
-#
-#      A URL to be displayed in the error page that users will see if
-#      access to an untrusted page is denied.
-#
-#  Type of value:
-#
-#      URL
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No links are displayed on the "untrusted" error page.
-#
-#  Notes:
-#
-#      The value of this option only matters if the experimental trust
-#      mechanism has been activated. (See trustfile below.)
-#
-#      If you use the trust mechanism, it is a good idea to write
-#      up some on-line documentation about your trust policy and to
-#      specify the URL(s) here. Use multiple times for multiple URLs.
-#
-#      The URL(s) should be added to the trustfile as well, so users
-#      don't end up locked out from the information on why they were
-#      locked out in the first place!
-#
-#trust-info-url  http://www.example.com/why_we_block.html
-#trust-info-url  http://www.example.com/what_we_allow.html
-#
-#
-#  1.3. admin-address
-#  ===================
-#
-#  Specifies:
-#
-#      An email address to reach the Privoxy administrator.
-#
-#  Type of value:
-#
-#      Email address
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No email address is displayed on error pages and the CGI user
-#      interface.
-#
-#  Notes:
-#
-#      If both admin-address and proxy-info-url are unset, the whole
-#      "Local Privoxy Support" box on all generated pages will not
-#      be shown.
-#
-#admin-address privoxy-admin@xxxxxxxxxxx
-#
-#
-#  1.4. proxy-info-url
-#  ====================
-#
-#  Specifies:
-#
-#      A URL to documentation about the local Privoxy setup,
-#      configuration or policies.
-#
-#  Type of value:
-#
-#      URL
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No link to local documentation is displayed on error pages and
-#      the CGI user interface.
-#
-#  Notes:
-#
-#      If both admin-address and proxy-info-url are unset, the whole
-#      "Local Privoxy Support" box on all generated pages will not
-#      be shown.
-#
-#      This URL shouldn't be blocked ;-)
-#
-#proxy-info-url http://www.example.com/proxy-service.html
-#
-#
-#  2. CONFIGURATION AND LOG FILE LOCATIONS
-#  ========================================
-#
-#  Privoxy can (and normally does) use a number of other files for
-#  additional configuration, help and logging. This section of the
-#  configuration file tells Privoxy where to find those other files.
-#
-#  The user running Privoxy, must have read permission for all
-#  configuration files, and write permission to any files that would
-#  be modified, such as log files and actions files.
-#
-#
-#
-#  2.1. confdir
-#  =============
-#
-#  Specifies:
-#
-#      The directory where the other configuration files are located.
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      /etc/privoxy (Unix) or Privoxy installation dir (Windows)
-#
-#  Effect if unset:
-#
-#      Mandatory
-#
-#  Notes:
-#
-#      No trailing "/", please.
-#
-confdir /home/halb/privoxy/etc
-#
-#
-#  2.2. templdir
-#  ==============
-#
-#  Specifies:
-#
-#      An alternative directory where the templates are loaded from.
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      unset
-#
-#  Effect if unset:
-#
-#      The templates are assumed to be located in confdir/template.
-#
-#  Notes:
-#
-#      Privoxy's original templates are usually overwritten with each
-#      update. Use this option to relocate customized templates that
-#      should be kept. As template variables might change between
-#      updates, you shouldn't expect templates to work with Privoxy
-#      releases other than the one they were part of, though.
-#
-#templdir .
-#
-#
-#  2.3. logdir
-#  ============
-#
-#  Specifies:
-#
-#      The directory where all logging takes place (i.e. where the
-#      logfile is located).
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
-#
-#  Effect if unset:
-#
-#      Mandatory
-#
-#  Notes:
-#
-#      No trailing "/", please.
-#
-logdir /home/halb/privoxy/var/log/privoxy
-#
-#
-#  2.4. actionsfile
-#  =================
-#
-#  Specifies:
-#
-#      The actions file(s) to use
-#
-#  Type of value:
-#
-#      Complete file name, relative to confdir
-#
-#  Default values:
-#
-#        match-all.action # Actions that are applied to all sites and maybe overruled later on.
-#
-#        default.action   # Main actions file
-#
-#        user.action      # User customizations
-#
-#  Effect if unset:
-#
-#      No actions are taken at all. More or less neutral proxying.
-#
-#  Notes:
-#
-#      Multiple actionsfile lines are permitted, and are in fact
-#      recommended!
-#
-#      The default values are default.action, which is the "main"
-#      actions file maintained by the developers, and user.action,
-#      where you can make your personal additions.
-#
-#      Actions files contain all the per site and per URL configuration
-#      for ad blocking, cookie management, privacy considerations,
-#      etc. There is no point in using Privoxy without at least one
-#      actions file.
-#
-#      Note that since Privoxy 3.0.7, the complete filename, including
-#      the ".action" extension has to be specified. The syntax change
-#      was necessary to be consistent with the other file options and
-#      to allow previously forbidden characters.
-#
-actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.
-actionsfile default.action   # Main actions file
-actionsfile user.action      # User customizations
-#
-#
-#  2.5. filterfile
-#  ================
-#
-#  Specifies:
-#
-#      The filter file(s) to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir
-#
-#  Default value:
-#
-#      default.filter (Unix) or default.filter.txt (Windows)
-#
-#  Effect if unset:
-#
-#      No textual content filtering takes place, i.e. all +filter{name}
-#      actions in the actions files are turned neutral.
-#
-#  Notes:
-#
-#      Multiple filterfile lines are permitted.
-#
-#      The filter files contain content modification rules that use
-#      regular expressions. These rules permit powerful changes on the
-#      content of Web pages, and optionally the headers as well, e.g.,
-#      you could try to disable your favorite JavaScript annoyances,
-#      re-write the actual displayed text, or just have some fun
-#      playing buzzword bingo with web pages.
-#
-#      The +filter{name} actions rely on the relevant filter (name)
-#      to be defined in a filter file!
-#
-#      A pre-defined filter file called default.filter that contains a
-#      number of useful filters for common problems is included in the
-#      distribution. See the section on the filter action for a list.
-#
-#      It is recommended to place any locally adapted filters into a
-#      separate file, such as user.filter.
-#
-filterfile default.filter
-#filterfile user.filter      # User customizations
-#
-#
-#  2.6. logfile
-#  =============
-#
-#  Specifies:
-#
-#      The log file to use
-#
-#  Type of value:
-#
-#      File name, relative to logdir
-#
-#  Default value:
-#
-#      Unset (commented out). When activated: logfile (Unix) or
-#      privoxy.log (Windows).
-#
-#  Effect if unset:
-#
-#      No logfile is written.
-#
-#  Notes:
-#
-#      The logfile is where all logging and error messages are
-#      written. The level of detail and number of messages are set with
-#      the debug option (see below).  The logfile can be useful for
-#      tracking down a problem with Privoxy (e.g., it's not blocking
-#      an ad you think it should block) and it can help you to monitor
-#      what your browser is doing.
-#
-#      Depending on the debug options below, the logfile may be a
-#      privacy risk if third parties can get access to it. As most
-#      users will never look at it, Privoxy 3.0.7 and later only log
-#      fatal errors by default.
-#
-#      For most troubleshooting purposes, you will have to change that,
-#      please refer to the debugging section for details.
-#
-#      Your logfile will grow indefinitely, and you will probably
-#      want to periodically remove it. On Unix systems, you can do
-#      this with a cron job (see "man cron"). For Red Hat based Linux
-#      distributions, a logrotate script has been included.
-#
-#      Any log files must be writable by whatever user Privoxy is
-#      being run as (on Unix, default user id is "privoxy").
-#
-logfile logfile
-#
-#
-#  2.7. trustfile
-#  ===============
-#
-#  Specifies:
-#
-#      The name of the trust file to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir
-#
-#  Default value:
-#
-#      Unset (commented out). When activated: trust (Unix) or trust.txt
-#      (Windows)
-#
-#  Effect if unset:
-#
-#      The entire trust mechanism is disabled.
-#
-#  Notes:
-#
-#      The trust mechanism is an experimental feature for building
-#      white-lists and should be used with care. It is NOT recommended
-#      for the casual user.
-#
-#      If you specify a trust file, Privoxy will only allow access to
-#      sites that are specified in the trustfile. Sites can be listed
-#      in one of two ways:
-#
-#      Prepending a ~ character limits access to this site only (and
-#      any sub-paths within this site), e.g. ~www.example.com allows
-#      access to ~www.example.com/ features/news.html, etc.
-#
-#      Or, you can designate sites as trusted referrers, by prepending
-#      the name with a + character. The effect is that access to
-#      untrusted sites will be granted -- but only if a link from
-#      this trusted referrer was used to get there. The link target
-#      will then be added to the "trustfile" so that future, direct
-#      accesses will be granted. Sites added via this mechanism do
-#      not become trusted referrers themselves (i.e. they are added
-#      with a ~ designation). There is a limit of 512 such entries,
-#      after which new entries will not be made.
-#
-#      If you use the + operator in the trust file, it may grow
-#      considerably over time.
-#
-#      It is recommended that Privoxy be compiled with the
-#      --disable-force, --disable-toggle and --disable-editor options,
-#      if this feature is to be used.
-#
-#      Possible applications include limiting Internet access for
-#      children.
-#
-#trustfile trust
-#
-#
-#  3. DEBUGGING
-#  =============
-#
-#  These options are mainly useful when tracing a problem. Note that
-#  you might also want to invoke Privoxy with the --no-daemon command
-#  line option when debugging.
-#
-#
-#
-#  3.1. debug
-#  ===========
-#
-#  Specifies:
-#
-#      Key values that determine what information gets logged.
-#
-#  Type of value:
-#
-#      Integer values
-#
-#  Default value:
-#
-#      0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)
-#
-#  Effect if unset:
-#
-#      Default value is used (see above).
-#
-#  Notes:
-#
-#      The available debug levels are:
-#
-#        debug         1 # Log the destination for each request Privoxy let through. See also debug 1024.
-#        debug         2 # show each connection status
-#        debug         4 # show I/O status
-#        debug         8 # show header parsing
-#        debug        16 # log all data written to the network into the logfile
-#        debug        32 # debug force feature
-#        debug        64 # debug regular expression filters
-#        debug       128 # debug redirects
-#        debug       256 # debug GIF de-animation
-#        debug       512 # Common Log Format
-#        debug      1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
-#        debug      2048 # CGI user interface
-#        debug      4096 # Startup banner and warnings.
-#        debug      8192 # Non-fatal errors
-#
-#
-#      To select multiple debug levels, you can either add them or
-#      use multiple debug lines.
-#
-#      A debug level of 1 is informative because it will show you each
-#      request as it happens. 1, 4096 and 8192 are recommended so that
-#      you will notice when things go wrong. The other levels are
-#      probably only of interest if you are hunting down a specific
-#      problem. They can produce a hell of an output (especially 16).
-#
-#      Privoxy used to ship with the debug levels recommended above
-#      enabled by default, but due to privacy concerns 3.0.7 and later
-#      are configured to only log fatal errors.
-#
-#      If you are used to the more verbose settings, simply enable
-#      the debug lines below again.
-#
-#      If you want to use pure CLF (Common Log Format), you should set
-#      "debug 512" ONLY and not enable anything else.
-#
-#      Privoxy has a hard-coded limit for the length of log messages. If
-#      it's reached, messages are logged truncated and marked with
-#      "... [too long, truncated]".
-#
-#      Please don't file any support requests without trying to
-#      reproduce the problem with increased debug level first. Once
-#      you read the log messages, you may even be able to solve the
-#      problem on your own.
-#
-#debug      1 # Log the destination for each request Privoxy let through.
-#debug   1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
-#debug   4096 # Startup banner and warnings
-#debug   8192 # Non-fatal errors
-#
-#
-#  3.2. single-threaded
-#  =====================
-#
-#  Specifies:
-#
-#      Whether to run only one server thread.
-#
-#  Type of value:
-#
-#      None
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Multi-threaded (or, where unavailable: forked) operation,
-#      i.e. the ability to serve multiple requests simultaneously.
-#
-#  Notes:
-#
-#      This option is only there for debugging purposes. It will
-#      drastically reduce performance.
-#
-#single-threaded
-#
-#
-#  3.3. hostname
-#  ==============
-#
-#  Specifies:
-#
-#      The hostname shown on the CGI pages.
-#
-#  Type of value:
-#
-#      Text
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      The hostname provided by the operating system is used.
-#
-#  Notes:
-#
-#      On some misconfigured systems resolving the hostname fails or
-#      takes too much time and slows Privoxy down. Setting a fixed
-#      hostname works around the problem.
-#
-#      In other circumstances it might be desirable to show a hostname
-#      other than the one returned by the operating system. For example
-#      if the system has several different hostnames and you don't
-#      want to use the first one.
-#
-#      Note that Privoxy does not validate the specified hostname value.
-#
-#hostname hostname.example.org
-#
-#
-#  4. ACCESS CONTROL AND SECURITY
-#  ===============================
-#
-#  This section of the config file controls the security-relevant
-#  aspects of Privoxy's configuration.
-#
-#
-#
-#  4.1. listen-address
-#  ====================
-#
-#  Specifies:
-#
-#      The IP address and TCP port on which Privoxy will listen for
-#      client requests.
-#
-#  Type of value:
-#
-#      [IP-Address]:Port
-#
-#  Default value:
-#
-#      127.0.0.1:8118
-#
-#  Effect if unset:
-#
-#      Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
-#      recommended for home users who run Privoxy on the same machine
-#      as their browser.
-#
-#  Notes:
-#
-#      You will need to configure your browser(s) to this proxy address
-#      and port.
-#
-#      If you already have another service running on port 8118, or
-#      if you want to serve requests from other machines (e.g. on your
-#      local network) as well, you will need to override the default.
-#
-#      If you leave out the IP address, Privoxy will bind to all
-#      interfaces (addresses) on your machine and may become reachable
-#      from the Internet. In that case, consider using access control
-#      lists (ACL's, see below), and/or a firewall.
-#
-#      If you open Privoxy to untrusted users, you will also
-#      want to make sure that the following actions are disabled:
-#      enable-edit-actions and enable-remote-toggle
-#
-#  Example:
-#
-#      Suppose you are running Privoxy on a machine which has the
-#      address 192.168.0.1 on your local private network (192.168.0.0)
-#      and has another outside connection with a different address. You
-#      want it to serve requests from inside only:
-#
-#        listen-address  192.168.0.1:8118
-#
-#
-listen-address  127.0.0.1:8118
-#
-#
-#  4.2. toggle
-#  ============
-#
-#  Specifies:
-#
-#      Initial state of "toggle" status
-#
-#  Type of value:
-#
-#      1 or 0
-#
-#  Default value:
-#
-#      1
-#
-#  Effect if unset:
-#
-#      Act as if toggled on
-#
-#  Notes:
-#
-#      If set to 0, Privoxy will start in "toggled off" mode,
-#      i.e. mostly behave like a normal, content-neutral proxy
-#      with both ad blocking and content filtering disabled. See
-#      enable-remote-toggle below.
-#
-#      The windows version will only display the toggle icon in the
-#      system tray if this option is present.
-#
-toggle  1
-#
-#
-#  4.3. enable-remote-toggle
-#  ==========================
-#
-#  Specifies:
-#
-#      Whether or not the web-based toggle feature may be used
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      The web-based toggle feature is disabled.
-#
-#  Notes:
-#
-#      When toggled off, Privoxy mostly acts like a normal,
-#      content-neutral proxy, i.e. doesn't block ads or filter content.
-#
-#      Access to the toggle feature can not be controlled separately by
-#      "ACLs" or HTTP authentication, so that everybody who can access
-#      Privoxy (see "ACLs" and listen-address above) can toggle it
-#      for all users. So this option is not recommended for multi-user
-#      environments with untrusted users.
-#
-#      Note that malicious client side code (e.g Java) is also capable
-#      of using this option.
-#
-#      As a lot of Privoxy users don't read documentation, this feature
-#      is disabled by default.
-#
-#      Note that you must have compiled Privoxy with support for this
-#      feature, otherwise this option has no effect.
-#
-enable-remote-toggle  0
-#
-#
-#  4.4. enable-remote-http-toggle
-#  ===============================
-#
-#  Specifies:
-#
-#      Whether or not Privoxy recognizes special HTTP headers to change
-#      its behaviour.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Privoxy ignores special HTTP headers.
-#
-#  Notes:
-#
-#      When toggled on, the client can change Privoxy's behaviour by
-#      setting special HTTP headers. Currently the only supported
-#      special header is "X-Filter: No", to disable filtering for
-#      the ongoing request, even if it is enabled in one of the
-#      action files.
-#
-#      This feature is disabled by default. If you are using Privoxy in
-#      a environment with trusted clients, you may enable this feature
-#      at your discretion. Note that malicious client side code (e.g
-#      Java) is also capable of using this feature.
-#
-#      This option will be removed in future releases as it has been
-#      obsoleted by the more general header taggers.
-#
-enable-remote-http-toggle  0
-#
-#
-#  4.5. enable-edit-actions
-#  =========================
-#
-#  Specifies:
-#
-#      Whether or not the web-based actions file editor may be used
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      The web-based actions file editor is disabled.
-#
-#  Notes:
-#
-#      Access to the editor can not be controlled separately by
-#      "ACLs" or HTTP authentication, so that everybody who can access
-#      Privoxy (see "ACLs" and listen-address above) can modify its
-#      configuration for all users.
-#
-#      This option is not recommended for environments with untrusted
-#      users and as a lot of Privoxy users don't read documentation,
-#      this feature is disabled by default.
-#
-#      Note that malicious client side code (e.g Java) is also capable
-#      of using the actions editor and you shouldn't enable this
-#      options unless you understand the consequences and are sure
-#      your browser is configured correctly.
-#
-#      Note that you must have compiled Privoxy with support for this
-#      feature, otherwise this option has no effect.
-#
-enable-edit-actions 0
-#
-#
-#  4.6. enforce-blocks
-#  ====================
-#
-#  Specifies:
-#
-#      Whether the user is allowed to ignore blocks and can "go there
-#      anyway".
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Blocks are not enforced.
-#
-#  Notes:
-#
-#      Privoxy is mainly used to block and filter requests as a service
-#      to the user, for example to block ads and other junk that clogs
-#      the pipes.  Privoxy's configuration isn't perfect and sometimes
-#      innocent pages are blocked. In this situation it makes sense to
-#      allow the user to enforce the request and have Privoxy ignore
-#      the block.
-#
-#      In the default configuration Privoxy's "Blocked" page contains
-#      a "go there anyway" link to adds a special string (the force
-#      prefix) to the request URL. If that link is used, Privoxy
-#      will detect the force prefix, remove it again and let the
-#      request pass.
-#
-#      Of course Privoxy can also be used to enforce a network
-#      policy. In that case the user obviously should not be able to
-#      bypass any blocks, and that's what the "enforce-blocks" option
-#      is for. If it's enabled, Privoxy hides the "go there anyway"
-#      link. If the user adds the force prefix by hand, it will not
-#      be accepted and the circumvention attempt is logged.
-#
-#  Examples:
-#
-#      enforce-blocks 1
-#
-enforce-blocks 0
-#
-#
-#  4.7. ACLs: permit-access and deny-access
-#  =========================================
-#
-#  Specifies:
-#
-#      Who can access what.
-#
-#  Type of value:
-#
-#      src_addr[/src_masklen] [dst_addr[/dst_masklen]]
-#
-#      Where src_addr and dst_addr are IP addresses in dotted decimal
-#      notation or valid DNS names, and src_masklen and dst_masklen are
-#      subnet masks in CIDR notation, i.e. integer values from 2 to 30
-#      representing the length (in bits) of the network address. The
-#      masks and the whole destination part are optional.
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't restrict access further than implied by listen-address
-#
-#  Notes:
-#
-#      Access controls are included at the request of ISPs and systems
-#      administrators, and are not usually needed by individual
-#      users. For a typical home user, it will normally suffice to
-#      ensure that Privoxy only listens on the localhost (127.0.0.1)
-#      or internal (home) network address by means of the listen-address
-#      option.
-#
-#      Please see the warnings in the FAQ that Privoxy is not intended
-#      to be a substitute for a firewall or to encourage anyone to
-#      defer addressing basic security weaknesses.
-#
-#      Multiple ACL lines are OK. If any ACLs are specified, Privoxy
-#      only talks to IP addresses that match at least one permit-access
-#      line and don't match any subsequent deny-access line. In other
-#      words, the last match wins, with the default being deny-access.
-#
-#      If Privoxy is using a forwarder (see forward below) for a
-#      particular destination URL, the dst_addr that is examined is
-#      the address of the forwarder and NOT the address of the ultimate
-#      target. This is necessary because it may be impossible for the
-#      local Privoxy to determine the IP address of the ultimate target
-#      (that's often what gateways are used for).
-#
-#      You should prefer using IP addresses over DNS names, because
-#      the address lookups take time. All DNS names must resolve! You
-#      can not use domain patterns like "*.org" or partial domain
-#      names. If a DNS name resolves to multiple IP addresses, only
-#      the first one is used.
-#
-#      Denying access to particular sites by ACL may have undesired
-#      side effects if the site in question is hosted on a machine
-#      which also hosts other sites (most sites are).
-#
-#  Examples:
-#
-#      Explicitly define the default behavior if no ACL and
-#      listen-address are set: "localhost" is OK. The absence of a
-#      dst_addr implies that all destination addresses are OK:
-#
-#        permit-access  localhost
-#
-#
-#      Allow any host on the same class C subnet as www.privoxy.org
-#      access to nothing but www.example.com (or other domains hosted
-#      on the same system):
-#
-#        permit-access  www.privoxy.org/24 www.example.com/32
-#
-#
-#      Allow access from any host on the 26-bit subnet 192.168.45.64 to
-#      anywhere, with the exception that 192.168.45.73 may not access
-#      the IP address behind www.dirty-stuff.example.com:
-#
-#        permit-access  192.168.45.64/26 
-#        deny-access   192.168.45.73  www.dirty-stuff.example.com
-#
-#
-#
-#  4.8. buffer-limit
-#  ==================
-#
-#  Specifies:
-#
-#      Maximum size of the buffer for content filtering.
-#
-#  Type of value:
-#
-#      Size in Kbytes
-#
-#  Default value:
-#
-#      4096
-#
-#  Effect if unset:
-#
-#      Use a 4MB (4096 KB) limit.
-#
-#  Notes:
-#
-#      For content filtering, i.e. the +filter and +deanimate-gif
-#      actions, it is necessary that Privoxy buffers the entire document
-#      body. This can be potentially dangerous, since a server could
-#      just keep sending data indefinitely and wait for your RAM to
-#      exhaust -- with nasty consequences.  Hence this option.
-#
-#      When a document buffer size reaches the buffer-limit, it is
-#      flushed to the client unfiltered and no further attempt to filter
-#      the rest of the document is made. Remember that there may be
-#      multiple threads running, which might require up to buffer-limit
-#      Kbytes each, unless you have enabled "single-threaded" above.
-#
-buffer-limit 4096
-#
-#
-#  5. FORWARDING
-#  ==============
-#
-#  This feature allows routing of HTTP requests through a chain of
-#  multiple proxies.
-#
-#  Forwarding can be used to chain Privoxy with a caching proxy to
-#  speed up browsing. Using a parent proxy may also be necessary if
-#  the machine that Privoxy runs on has no direct Internet access.
-#
-#  Note that parent proxies can severely decrease your privacy
-#  level. For example a parent proxy could add your IP address to the
-#  request headers and if it's a caching proxy it may add the "Etag"
-#  header to revalidation requests again, even though you configured
-#  Privoxy to remove it. It may also ignore Privoxy's header time
-#  randomization and use the original values which could be used by
-#  the server as cookie replacement to track your steps between visits.
-#
-#  Also specified here are SOCKS proxies. Privoxy supports the SOCKS
-#  4 and SOCKS 4A protocols.
-#
-#
-#
-#  5.1. forward
-#  =============
-#
-#  Specifies:
-#
-#      To which parent HTTP proxy specific requests should be routed.
-#
-#  Type of value:
-#
-#      target_pattern http_parent[:port]
-#
-#      where target_pattern is a URL pattern that specifies to which
-#      requests (i.e. URLs) this forward rule shall apply. Use /
-#      to denote "all URLs".  http_parent[:port] is the DNS name or
-#      IP address of the parent HTTP proxy through which the requests
-#      should be forwarded, optionally followed by its listening port
-#      (default: 8080). Use a single dot (.) to denote "no forwarding".
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't use parent HTTP proxies.
-#
-#  Notes:
-#
-#      If http_parent is ".", then requests are not forwarded to
-#      another HTTP proxy but are made directly to the web servers.
-#
-#      Multiple lines are OK, they are checked in sequence, and the
-#      last match wins.
-#
-#  Examples:
-#
-#      Everything goes to an example parent proxy, except SSL on port
-#      443 (which it doesn't handle):
-#
-#        forward   /      parent-proxy.example.org:8080 
-#        forward   :443   .
-#
-#
-#      Everything goes to our example ISP's caching proxy, except for
-#      requests to that ISP's sites:
-#
-#        forward   /                  caching-proxy.isp.example.net:8000
-#        forward   .isp.example.net   .
-#
-#
-#
-#
-#  5.2. forward-socks4, forward-socks4a and forward-socks5
-#  ========================================================
-#
-#  Specifies:
-#
-#      Through which SOCKS proxy (and optionally to which parent HTTP
-#      proxy) specific requests should be routed.
-#
-#  Type of value:
-#
-#      target_pattern socks_proxy[:port] http_parent[:port]
-#
-#      where target_pattern is a URL pattern that specifies to which
-#      requests (i.e. URLs) this forward rule shall apply. Use / to
-#      denote "all URLs".  http_parent and socks_proxy are IP addresses
-#      in dotted decimal notation or valid DNS names (http_parent may
-#      be "." to denote "no HTTP forwarding"), and the optional port
-#      parameters are TCP ports, i.e. integer values from 1 to 65535
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't use SOCKS proxies.
-#
-#  Notes:
-#
-#      Multiple lines are OK, they are checked in sequence, and the
-#      last match wins.
-#
-#      The difference between forward-socks4 and forward-socks4a
-#      is that in the SOCKS 4A protocol, the DNS resolution of the
-#      target hostname happens on the SOCKS server, while in SOCKS 4
-#      it happens locally.
-#
-#      With forward-socks5 the DNS resolution will happen on the remote
-#      server as well.
-#
-#      If http_parent is ".", then requests are not forwarded to another
-#      HTTP proxy but are made (HTTP-wise) directly to the web servers,
-#      albeit through a SOCKS proxy.
-#
-#  Examples:
-#
-#      From the company example.com, direct connections are made to all
-#      "internal" domains, but everything outbound goes through their
-#      ISP's proxy by way of example.com's corporate SOCKS 4A gateway
-#      to the Internet.
-#
-#        forward-socks4a   /       socks-gw.example.com:1080    www-cache.isp.example.net:8080 
-#        forward           .example.com        .
-#
-#
-#      A rule that uses a SOCKS 4 gateway for all destinations but no
-#      HTTP parent looks like this:
-#
-#        forward-socks4   /               socks-gw.example.com:1080  .
-#
-#
-#      To chain Privoxy and Tor, both running on the same system,
-#      you would use something like:
-#
-#        forward-socks4a   /               127.0.0.1:9050 .
-#
-#
-#      The public Tor network can't be used to reach your local network,
-#      if you need to access local servers you therefore might want
-#      to make some exceptions:
-#
-#        forward         192.168.*.*/     .  
-#        forward         10.*.*.*/        .  
-#        forward         127.*.*.*/       .
-#
-#
-#      Unencrypted connections to systems in these address ranges will
-#      be as (un) secure as the local network is, but the alternative
-#      is that you can't reach the local network through Privoxy at
-#      all. Of course this may actually be desired and there is no
-#      reason to make these exceptions if you aren't sure you need them.
-#
-#      If you also want to be able to reach servers in your local
-#      network by using their names, you will need additional exceptions
-#      that look like this:
-#
-#       forward           localhost/     .
-#
-#
-#
-#
-#  5.3. forwarded-connect-retries
-#  ===============================
-#
-#  Specifies:
-#
-#      How often Privoxy retries if a forwarded connection request
-#      fails.
-#
-#  Type of value:
-#
-#      Number of retries.
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Connections forwarded through other proxies are treated like
-#      direct connections and no retry attempts are made.
-#
-#  Notes:
-#
-#      forwarded-connect-retries is mainly interesting for socks4a
-#      connections, where Privoxy can't detect why the connections
-#      failed. The connection might have failed because of a DNS timeout
-#      in which case a retry makes sense, but it might also have failed
-#      because the server doesn't exist or isn't reachable. In this
-#      case the retry will just delay the appearance of Privoxy's
-#      error message.
-#
-#      Note that in the context of this option, "forwarded connections"
-#      includes all connections that Privoxy forwards through other
-#      proxies. This option is not limited to the HTTP CONNECT method.
-#
-#      Only use this option, if you are getting lots of
-#      forwarding-related error messages that go away when you try again
-#      manually. Start with a small value and check Privoxy's logfile
-#      from time to time, to see how many retries are usually needed.
-#
-#  Examples:
-#
-#      forwarded-connect-retries 1
-#
-forwarded-connect-retries  0
-#
-#
-#  5.4. accept-intercepted-requests
-#  =================================
-#
-#  Specifies:
-#
-#      Whether intercepted requests should be treated as valid.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Only proxy requests are accepted, intercepted requests are
-#      treated as invalid.
-#
-#  Notes:
-#
-#      If you don't trust your clients and want to force them to use
-#      Privoxy, enable this option and configure your packet filter
-#      to redirect outgoing HTTP connections into Privoxy.
-#
-#      Make sure that Privoxy's own requests aren't redirected as well.
-#      Additionally take care that Privoxy can't intentionally connect
-#      to itself, otherwise you could run into redirection loops if
-#      Privoxy's listening port is reachable by the outside or an
-#      attacker has access to the pages you visit.
-#
-#  Examples:
-#
-#      accept-intercepted-requests 1
-#
-accept-intercepted-requests 0
-#
-#
-#  5.5. allow-cgi-request-crunching
-#  =================================
-#
-#  Specifies:
-#
-#      Whether requests to Privoxy's CGI pages can be blocked or
-#      redirected.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Privoxy ignores block and redirect actions for its CGI pages.
-#
-#  Notes:
-#
-#      By default Privoxy ignores block or redirect actions for
-#      its CGI pages.  Intercepting these requests can be useful in
-#      multi-user setups to implement fine-grained access control,
-#      but it can also render the complete web interface useless and
-#      make debugging problems painful if done without care.
-#
-#      Don't enable this option unless you're sure that you really
-#      need it.
-#
-#  Examples:
-#
-#      allow-cgi-request-crunching 1
-#
-allow-cgi-request-crunching 0
-#
-#
-#  5.6. split-large-forms
-#  =======================
-#
-#  Specifies:
-#
-#      Whether the CGI interface should stay compatible with broken
-#      HTTP clients.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      The CGI form generate long GET URLs.
-#
-#  Notes:
-#
-#      Privoxy's CGI forms can lead to rather long URLs. This isn't
-#      a problem as far as the HTTP standard is concerned, but it can
-#      confuse clients with arbitrary URL length limitations.
-#
-#      Enabling split-large-forms causes Privoxy to divide big forms
-#      into smaller ones to keep the URL length down. It makes editing
-#      a lot less convenient and you can no longer submit all changes
-#      at once, but at least it works around this browser bug.
-#
-#      If you don't notice any editing problems, there is no reason
-#      to enable this option, but if one of the submit buttons appears
-#      to be broken, you should give it a try.
-#
-#  Examples:
-#
-#      split-large-forms 1
-#
-split-large-forms 0
-#
-#
-#  5.7. keep-alive-timeout
-#  ========================
-#
-#  Specifies:
-#
-#      Number of seconds after which an open connection will no longer
-#      be reused.
-#
-#  Type of value:
-#
-#      Time in seconds.
-#
-#  Default value:
-#
-#      None
-#
-#  Effect if unset:
-#
-#      Connections are not reused.
-#
-#  Notes:
-#
-#      This option has no effect if Privoxy has been compiled without
-#      keep-alive support.
-#
-#  Notes:
-#
-#      Note that reusing connections doesn't necessary cause
-#      speedups. There are also a few privacy implications you should
-#      be aware of.
-#
-#      Outgoing connections are shared between clients (if there are
-#      more than one) and closing the client that initiated the outgoing
-#      connection does not affect the connection between Privoxy and
-#      the server unless the client's request hasn't been completed
-#      yet. If the outgoing connection is idle, it will not be closed
-#      until either Privoxy's or the server's timeout is reached. While
-#      it's open, the server knows that the system running Privoxy is
-#      still there.
-#
-#  Examples:
-#
-#      keep-alive-timeout 300
-#
-keep-alive-timeout 300
-#
-#
-#  5.8. socket-timeout
-#  ====================
-#
-#  Specifies:
-#
-#      Number of seconds after which a socket times out if no data
-#      is received.
-#
-#  Type of value:
-#
-#      Time in seconds.
-#
-#  Default value:
-#
-#      None
-#
-#  Effect if unset:
-#
-#      A default value of 300 seconds is used.
-#
-#  Notes:
-#
-#      For SOCKS requests the timeout currently doesn't start until
-#      the SOCKS server accepted the request. This will be fixed in
-#      the next release.
-#
-#  Examples:
-#
-#      socket-timeout 300
-#
-socket-timeout 300
-#
-#
-#  6. WINDOWS GUI OPTIONS
-#  =======================
-#
-#  Privoxy has a number of options specific to the Windows GUI
-#  interface:
-#
-#
-#  If "activity-animation" is set to 1, the Privoxy icon will animate
-#  when "Privoxy" is active. To turn off, set to 0.
-#
-#activity-animation   1
-#
-#  If "log-messages" is set to 1, Privoxy will log messages to the
-#  console window:
-#
-#log-messages   1
-#
-#  If "log-buffer-size" is set to 1, the size of the log buffer,
-#  i.e. the amount of memory used for the log messages displayed in
-#  the console window, will be limited to "log-max-lines" (see below).
-#
-#  Warning: Setting this to 0 will result in the buffer to grow
-#  infinitely and eat up all your memory!
-#
-#log-buffer-size 1
-#
-#  log-max-lines is the maximum number of lines held in the log
-#  buffer. See above.
-#
-#log-max-lines 200
-#
-#  If "log-highlight-messages" is set to 1, Privoxy will highlight
-#  portions of the log messages with a bold-faced font:
-#
-#log-highlight-messages 1
-#
-#  The font used in the console window:
-#
-#log-font-name Comic Sans MS
-#
-#  Font size used in the console window:
-#
-#log-font-size 8
-#
-#  "show-on-task-bar" controls whether or not Privoxy will appear as
-#  a button on the Task bar when minimized:
-#
-#show-on-task-bar 0
-#
-#  If "close-button-minimizes" is set to 1, the Windows close button
-#  will minimize Privoxy instead of closing the program (close with
-#  the exit option on the File menu).
-#
-#close-button-minimizes 1
-#
-#  The "hide-console" option is specific to the MS-Win console version
-#  of Privoxy.  If this option is used, Privoxy will disconnect from
-#  and hide the command console.
-#
-#hide-console
-#
-#
diff --git a/external/privoxy/config.sub b/external/privoxy/config.sub
deleted file mode 100644
index c894da4..0000000
--- a/external/privoxy/config.sub
+++ /dev/null
@@ -1,1773 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-02-10'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@xxxxxxx>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@xxxxxxx>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  android-linux)
-    os=-linux-android
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
-		os=
-		basic_machine=$1
-		;;
-	-bluegene*)
-		os=-cnk
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
-	-chorusrdb)
-		os=-chorusrdb
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| aarch64 | aarch64_be \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-        | be32 | be64 \
-	| bfin \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| epiphany \
-	| fido | fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| hexagon \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| le32 | le64 \
-	| lm32 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64octeon | mips64octeonel \
-	| mips64orion | mips64orionel \
-	| mips64r5900 | mips64r5900el \
-	| mips64vr | mips64vrel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| moxie \
-	| mt \
-	| msp430 \
-	| nds32 | nds32le | nds32be \
-	| nios | nios2 \
-	| ns16k | ns32k \
-	| open8 \
-	| or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle \
-	| pyramid \
-	| rl78 | rx \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu \
-	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
-	| ubicom32 \
-	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| we32k \
-	| x86 | xc16x | xstormy16 | xtensa \
-	| z8k | z80)
-		basic_machine=$basic_machine-unknown
-		;;
-	c54x)
-		basic_machine=tic54x-unknown
-		;;
-	c55x)
-		basic_machine=tic55x-unknown
-		;;
-	c6x)
-		basic_machine=tic6x-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	strongarm | thumb | xscale)
-		basic_machine=arm-unknown
-		;;
-	xgate)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	xscaleeb)
-		basic_machine=armeb-unknown
-		;;
-
-	xscaleel)
-		basic_machine=armel-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| aarch64-* | aarch64_be-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| be32-* | be64-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| clipper-* | craynv-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| hexagon-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| le32-* | le64-* \
-	| lm32-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64octeon-* | mips64octeonel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64r5900-* | mips64r5900el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| open8-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
-	| pyramid-* \
-	| rl78-* | romp-* | rs6000-* | rx-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
-	| tahoe-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tile*-* \
-	| tron-* \
-	| ubicom32-* \
-	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
-	| vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* \
-	| xstormy16-* | xtensa*-* \
-	| ymp-* \
-	| z8k-* | z80-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	bluegene*)
-		basic_machine=powerpc-ibm
-		os=-cnk
-		;;
-	c54x-*)
-		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c55x-*)
-		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c6x-*)
-		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16 | cr16-*)
-		basic_machine=cr16-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	microblaze)
-		basic_machine=microblaze-xilinx
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
-	msys)
-		basic_machine=i386-pc
-		os=-msys
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	nacl)
-		basic_machine=le32-unknown
-		os=-nacl
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	neo-tandem)
-		basic_machine=neo-tandem
-		;;
-	nse-tandem)
-		basic_machine=nse-tandem
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc | ppcbe)	basic_machine=powerpc-unknown
-		;;
-	ppc-* | ppcbe-*)
-		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	strongarm-* | thumb-*)
-		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tile*)
-		basic_machine=$basic_machine-unknown
-		os=-linux-gnu
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	xscale-* | xscalee[bl]-*)
-		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-	# First match some system type aliases
-	# that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-auroraux)
-		os=-auroraux
-		;;
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-	-os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-dicos*)
-		os=-dicos
-		;;
-	-nacl*)
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	score-*)
-		os=-elf
-		;;
-	spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-	c4x-* | tic4x-*)
-		os=-coff
-		;;
-	tic54x-*)
-		os=-coff
-		;;
-	tic55x-*)
-		os=-coff
-		;;
-	tic6x-*)
-		os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-haiku)
-		os=-haiku
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-cnk*|-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff --git a/external/privoxy/configure.in b/external/privoxy/configure.in
deleted file mode 100644
index 2945a7a..0000000
--- a/external/privoxy/configure.in
+++ /dev/null
@@ -1,1463 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-dnl 
-dnl $Id: configure.in,v 1.126 2009/03/21 10:45:06 fabiankeil Exp $
-dnl 
-dnl Written by and Copyright (C) 2001-2009 the
-dnl Privoxy team. http://www.privoxy.org/
-dnl
-dnl Based on the Internet Junkbuster originally written
-dnl by and Copyright (C) 1997 Anonymous Coders and 
-dnl Junkbusters Corporation.  http://www.junkbusters.com
-dnl
-dnl This program is free software; you can redistribute it 
-dnl and/or modify it under the terms of the GNU General
-dnl Public License as published by the Free Software
-dnl Foundation; either version 2 of the License, or (at
-dnl your option) any later version.
-dnl 
-dnl This program is distributed in the hope that it will
-dnl be useful, but WITHOUT ANY WARRANTY; without even the
-dnl implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.  See the GNU General Public
-dnl License for more details.
-dnl 
-dnl The GNU General Public License should be included with
-dnl this file.  If not, you can view it at
-dnl http://www.gnu.org/copyleft/gpl.html
-dnl or write to the Free Software Foundation, Inc., 59
-dnl Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-dnl 
-dnl $Log: configure.in,v $
-dnl Revision 1.126  2009/03/21 10:45:06  fabiankeil
-dnl Declare the code stable.
-dnl
-dnl Revision 1.125  2009/02/25 16:58:03  fabiankeil
-dnl And the journey continues. Bump version to 3.0.12 UNRELEASED.
-dnl
-dnl Revision 1.124  2009/02/12 15:42:00  fabiankeil
-dnl Declare the code stable.
-dnl
-dnl Revision 1.123  2009/02/06 18:17:32  fabiankeil
-dnl Boldly enable keep-alive support where possible.
-dnl
-dnl Revision 1.122  2008/10/18 11:17:52  fabiankeil
-dnl Connection keep-alive support is ready for testing,
-dnl allow enabling it through the configure script.
-dnl
-dnl Revision 1.121  2008/08/30 12:03:07  fabiankeil
-dnl Remove FEATURE_COOKIE_JAR.
-dnl
-dnl Revision 1.120  2008/08/21 17:19:50  fabiankeil
-dnl Change version to 3.0.11 UNRELEASED.
-dnl
-dnl Revision 1.119  2008/08/13 16:53:50  fabiankeil
-dnl Change version to 3.0.10 stable.
-dnl
-dnl Revision 1.118  2008/06/27 12:50:44  fabiankeil
-dnl Here's looking at you, Gentoo Linux: Show a warning if
-dnl --disable-pthread is used even though pthreads are available.
-dnl
-dnl Revision 1.117  2008/06/14 12:47:30  fabiankeil
-dnl Set CODE_STATUS to beta.
-dnl
-dnl Revision 1.116  2008/06/08 11:55:09  fabiankeil
-dnl - Show a warning if the soon-to-be-removed static PCRE code is used.
-dnl - Hide the "using built-in static pcrs" message. With dynamic linking
-dnl   against PCRS disabled, the message isn't particularly useful.
-dnl
-dnl Revision 1.115  2008/05/25 15:50:14  fabiankeil
-dnl Try to use zlib by default, but just show a warning if it's
-dnl unavailable. Remove --enable-zlib, add  --disable-zlib.
-dnl
-dnl Revision 1.114  2008/04/06 15:18:33  fabiankeil
-dnl Oh well, rename the --enable-pcre-host-patterns option to
-dnl --enable-extended-host-patterns as it's not really PCRE syntax.
-dnl
-dnl Revision 1.113  2008/04/06 14:54:26  fabiankeil
-dnl Use PCRE syntax in host patterns when configured
-dnl with --enable-pcre-host-patterns.
-dnl
-dnl Revision 1.112  2008/03/27 18:27:22  fabiankeil
-dnl Remove kill-popups action.
-dnl
-dnl Revision 1.111  2008/02/03 14:40:47  fabiankeil
-dnl Remove unused OSX_DARWIN macro. Reported by Mark Miller in #1852529.
-dnl
-dnl Revision 1.110  2008/01/26 10:52:13  fabiankeil
-dnl Change version to 3.0.9 UNRELEASED.
-dnl
-dnl Revision 1.109  2008/01/20 14:07:09  fabiankeil
-dnl Set CODE_STATUS to stable.
-dnl
-dnl Revision 1.108  2007/12/10 02:30:00  hal9
-dnl Change versioning for > 3.0.7 && < 3.0.8
-dnl
-dnl Revision 1.107  2007/11/15 02:50:14  hal9
-dnl Setting to "beta" (for doc builds, etc).
-dnl
-dnl Revision 1.106  2007/05/11 11:49:41  fabiankeil
-dnl Check for strlcat().
-dnl
-dnl Revision 1.105  2007/04/09 17:34:58  fabiankeil
-dnl Check for snprintf().
-dnl
-dnl Revision 1.104  2007/03/31 13:35:11  fabiankeil
-dnl Add checks for gettimeofday() and strlcpy().
-dnl
-dnl Revision 1.103  2007/01/20 16:29:38  fabiankeil
-dnl Suppress edit buttons for action files if Privoxy has
-dnl no write access. Suggested by Roland in PR 1564026.
-dnl
-dnl Revision 1.102  2007/01/18 14:55:45  fabiankeil
-dnl Check for tzset() and putenv() to make sure the
-dnl replacement timegm() isn't included on systems
-dnl where it fails to compile.
-dnl
-dnl Revision 1.101  2007/01/12 15:20:17  fabiankeil
-dnl Temporarily ignore external libpcrs to prevent
-dnl problems that are fixed in Privoxy's own version.
-dnl
-dnl Revision 1.100  2007/01/07 07:38:10  joergs
-dnl Disabled -pipe for AmigaOS4.
-dnl
-dnl Revision 1.99  2007/01/01 19:36:37  fabiankeil
-dnl Integrate a modified version of Wil Mahan's
-dnl zlib patch (PR #895531).
-dnl
-dnl Revision 1.98  2006/12/17 19:15:26  fabiankeil
-dnl Added ./configure switch for FEATURE_GRACEFUL_TERMINATION.
-dnl
-dnl Revision 1.97  2006/11/21 18:32:46  hal9
-dnl Setting version to 3.0.7 UNRELEASED for lack of a better setting.
-dnl
-dnl Revision 1.96  2006/11/18 14:42:51  fabiankeil
-dnl Mark as stable.
-dnl
-dnl Revision 1.95  2006/11/14 02:08:59  hal9
-dnl Setting version string to 3.0.6 UNRELEASED. This needs to be reset to 3.0.6
-dnl stable just before CVS is tagged for release.
-dnl
-dnl Revision 1.94  2006/11/13 19:05:50  fabiankeil
-dnl Make pthread mutex locking more generic. Instead of
-dnl checking for OSX and OpenBSD, check for FEATURE_PTHREAD
-dnl and use mutex locking unless there is an _r function
-dnl available. Better safe than sorry.
-dnl
-dnl Fixes "./configure --disable-pthread" and should result
-dnl in less threading-related problems on pthread-using platforms,
-dnl but it still doesn't fix BR#1122404.
-dnl
-dnl Revision 1.93  2006/09/22 01:26:20  hal9
-dnl Set version to 3.0.5 BETA for hopefully release this weekend.
-dnl
-dnl Revision 1.92  2006/08/17 17:09:49  fabiankeil
-dnl Added check for timegm().
-dnl
-dnl Revision 1.91  2006/08/13 22:01:51  fabiankeil
-dnl Added checks for strptime() and random()
-dnl
-dnl Revision 1.90  2006/07/18 14:48:45  david__schmidt
-dnl Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-dnl with what was really the latest development (the v_3_0_branch branch)
-dnl
-dnl Revision 1.68.2.20  2004/01/31 16:31:46  oes
-dnl Resetting version info to 0.0.0 UNRELEASED
-dnl
-dnl Revision 1.68.2.19  2004/01/30 09:26:03  oes
-dnl Added docbook paths for debian sarge; set status for release
-dnl
-dnl Revision 1.68.2.18  2003/12/08 15:10:29  oes
-dnl Bugfix: --with-docbook now correctly accepts its path parameter. Thanks, Roland!
-dnl
-dnl Revision 1.68.2.17  2003/10/18 18:41:26  david__schmidt
-dnl Update to remain buildable on OS/2 - remove the failures
-dnl due to missing unixisms
-dnl
-dnl Revision 1.68.2.16  2003/03/26 16:05:14  oes
-dnl Marked as 0.0.0 UNRELEASED
-dnl
-dnl Revision 1.68.2.15  2003/03/26 00:25:00  oes
-dnl Bump version for 3.0.2
-dnl
-dnl Revision 1.68.2.14  2003/03/25 13:27:12  hal9
-dnl Manually apply Docbook/FreeBSD patch #708081 from a.go at tiscali.nl.
-dnl
-dnl Revision 1.68.2.13  2003/03/18 19:38:57  oes
-dnl Set version info for 3.0.1 release
-dnl
-dnl Revision 1.68.2.12  2003/03/07 03:41:04  david__schmidt
-dnl Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX.  Hopefully this will take care of all of those pesky crash reports.
-dnl
-dnl Revision 1.68.2.11  2003/03/06 15:22:37  oes
-dnl Fixed minor shell syntax bug
-dnl
-dnl Revision 1.68.2.10  2003/01/08 16:39:41  oes
-dnl Changing default to exclude FEATURE_IMAGE_DETECT_MSIE because of problem reports with recent IEs
-dnl
-dnl Revision 1.68.2.9  2002/12/13 23:47:45  hal9
-dnl Add openbsd $specialflags per gunner at styx2002.no-ip.org
-dnl
-dnl Revision 1.68.2.8  2002/11/27 12:55:26  oes
-dnl Fixed broken handling of pre-set CFLAGS
-dnl
-dnl Revision 1.68.2.7  2002/10/25 02:44:22  hal9
-dnl Port of make install, etc from main trunk. Needs testing! Add Slackware
-dnl support, and other related changes. Update related docs.
-dnl
-dnl Revision 1.68.2.6  2002/09/25 15:35:15  oes
-dnl Marking as non-release
-dnl
-dnl Revision 1.68.2.5  2002/08/25 23:37:00  hal9
-dnl Getting ready for 3.0 release.
-dnl
-dnl Revision 1.68.2.4  2002/08/10 11:21:57  oes
-dnl - Set Version to 2.9.20 (beta)
-dnl - Add two AC_DEFINEs that indicate if the pcre*.h headers
-dnl   are located in a pcre/ subdir to the include path.
-dnl
-dnl Revision 1.68.2.3  2002/08/06 11:29:36  oes
-dnl Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
-dnl
-dnl Revision 1.68.2.2  2002/07/30 19:36:09  hal9
-dnl Bump version to 2.9.17.
-dnl
-dnl Revision 1.68.2.1  2002/07/26 15:21:12  oes
-dnl  Bumped version number for 2.9.16 freeze
-dnl
-dnl Revision 1.68  2002/05/25 16:54:54  jongfoster
-dnl Detect if the compiler supports -pthread.
-dnl Hopefully this will fix bug 560442.  (I don't have a HP PA-RISC
-dnl machine to test this!)
-dnl
-dnl Revision 1.67  2002/05/03 14:33:59  oes
-dnl Generate doc/soucre/ldp.dsl
-dnl
-dnl Revision 1.66  2002/05/03 00:41:56  oes
-dnl Set version to 2.9.15 to comply with new versioning scheme
-dnl
-dnl Revision 1.65  2002/04/25 19:13:57  morcego
-dnl Removed RPM release number declaration on configure.in
-dnl Changed makefile to use given value for RPM_PACKAGEV when on uploading
-dnl targets (will produce an error, explaining who to do it, if no value
-dnl if provided).
-dnl
-dnl Revision 1.64  2002/04/22 16:32:31  morcego
-dnl configure.in, *.spec: Bumping release to 2 (2.9.14-2)
-dnl -rh.spec: uid and gid are now macros
-dnl -suse.spec: Changing the header Copyright to License (Copyright is
-dnl             deprecable)
-dnl
-dnl Revision 1.63  2002/04/11 11:00:21  oes
-dnl Applied Moritz' fix for socklen_t on Solaris
-dnl
-dnl Revision 1.62  2002/04/11 10:09:20  oes
-dnl Version 2.9.14
-dnl
-dnl Revision 1.61  2002/04/10 18:14:45  morcego
-dnl - (privoxy-rh.spec only) Relisting template files on the %%files section
-dnl - (configure.in, privoxy-rh.spec) Bumped package release to 5
-dnl
-dnl Revision 1.60  2002/04/09 16:38:49  oes
-dnl Added detection of missing config.h.in
-dnl
-dnl Revision 1.59  2002/04/06 20:23:55  jongfoster
-dnl Removing unnessacery tests (C++, ranlib)
-dnl
-dnl Revision 1.58  2002/04/04 20:49:20  swa
-dnl attempt to consolidate the
-dnl different dokbook versions.
-dnl
-dnl Revision 1.57  2002/04/04 00:36:36  gliptak
-dnl always use pcre for matching
-dnl
-dnl Revision 1.56  2002/04/03 22:28:03  gliptak
-dnl Removed references to gnu_regex
-dnl
-dnl Revision 1.55  2002/04/03 03:54:38  gliptak
-dnl Checking pcre version
-dnl
-dnl Revision 1.54  2002/04/01 00:54:24  gliptak
-dnl More changes needed around regex support.
-dnl
-dnl Revision 1.53  2002/03/29 20:09:01  swa
-dnl al's patch
-dnl
-dnl Revision 1.52  2002/03/29 19:51:40  gliptak
-dnl Correcting compile problem with Debian
-dnl
-dnl Revision 1.51  2002/03/28 20:43:00  swa
-dnl set make correctly
-dnl
-dnl Revision 1.50  2002/03/27 03:03:45  hal9
-dnl Add test for man2html
-dnl
-dnl Revision 1.49  2002/03/27 02:19:52  david__schmidt
-dnl More Mac OSX support:
-dnl - Get rid of extraneous, noisy -pthread warnings
-dnl - Define unix so we get oes' unix-tagged changes
-dnl
-dnl Revision 1.48  2002/03/26 22:29:54  swa
-dnl we have a new homepage!
-dnl
-dnl Revision 1.47  2002/03/26 16:41:00  hal9
-dnl Upped RPM Release to 3 (need to build new RH packages)
-dnl
-dnl Revision 1.46  2002/03/24 18:55:06  jongfoster
-dnl Making Docbook work under Windows
-dnl
-dnl Revision 1.45  2002/03/24 14:19:55  swa
-dnl set rpm package release in configure.in. nowhere else.
-dnl
-dnl Revision 1.44  2002/03/24 13:25:43  swa
-dnl name change related issues
-dnl
-dnl Revision 1.43  2002/03/24 12:56:21  swa
-dnl name change related issues.
-dnl
-dnl Revision 1.42  2002/03/22 18:11:37  jongfoster
-dnl Bumping version number to 2.9.12
-dnl
-dnl Revision 1.41  2002/03/19 19:30:04  morcego
-dnl - Fixing stylesheet checking on configure. If it is found, no further checks
-dnl   should be done
-dnl
-dnl - configure will now check for db2html or docbook2html (should work now
-dnl   on SuSe without the docbktls package)
-dnl
-dnl Revision 1.40  2002/03/09 14:33:30  oes
-dnl Fixing the (harmless) AC_CHECK_FILE warnings
-dnl
-dnl Revision 1.39  2002/03/08 16:46:13  oes
-dnl Added --enable-no-gifs
-dnl
-dnl Revision 1.38  2002/03/08 14:13:50  morcego
-dnl Fixing configure, to remove a command not found error.
-dnl
-dnl Revision 1.37  2002/03/08 12:58:21  oes
-dnl Tiny bugfix in AC_ARG_WITH(debug)
-dnl
-dnl Revision 1.36  2002/03/06 23:50:36  morcego
-dnl Will not test for a text browser if we are not using docbook.
-dnl
-dnl Revision 1.35  2002/03/06 21:55:52  morcego
-dnl New configure option: --with-docbook=(yes|no|directory)
-dnl Preliminary new platform detection code included. Will work with the
-dnl old one for now. No use just trowing it away
-dnl
-dnl Revision 1.34  2002/03/06 20:57:00  morcego
-dnl Fixing detection of stylesheets on SuSe.
-dnl
-dnl Revision 1.33  2002/03/05 17:31:11  morcego
-dnl Search for docbook.dsl. Should solve portability problems for SuSe.
-dnl
-dnl Revision 1.32  2002/03/05 14:07:43  morcego
-dnl configure now detects rpm topdir, and change GNUmakefile acordingly
-dnl    (based on sugestion by Sarantis Paskalis)
-dnl
-dnl Revision 1.31  2002/03/05 13:43:28  morcego
-dnl Checking for text browser, so redhat-dok can work.
-dnl
-dnl Revision 1.30  2002/03/04 17:58:01  oes
-dnl Deleted _DEBUG and PID_FILE_PATH
-dnl
-dnl Revision 1.29  2002/02/28 14:20:53  oes
-dnl Fixed detection of gethost*_r functions on Solaris
-dnl
-dnl Revision 1.28  2002/02/27 15:02:38  oes
-dnl Incremented version number
-dnl
-dnl Revision 1.27  2002/01/10 12:35:18  oes
-dnl Added cross-compile defaults to the AC_CHECK_SIZEOF macros
-dnl to silence autoconf warnings. Numbers are for Intel/Linux.
-dnl Is there a better way?
-dnl
-dnl Revision 1.26  2002/01/09 14:29:49  oes
-dnl - Added AC_CHECK_FUNC tests for the availability of
-dnl   gethostbyname_r, gethostbyaddr_r, gmtime_r and
-dnl   localtime_r, as well as AC_TRY_COMPILE tests to
-dnl   determine their signatures.
-dnl
-dnl - Fixed a bug with the init of CFLAGS that was
-dnl   reported by barsnick
-dnl
-dnl Revision 1.25  2002/01/04 15:27:18  oes
-dnl Changed quoting of CODE_STATUS for use in make
-dnl
-dnl Revision 1.24  2001/12/30 14:07:31  steudten
-dnl - Add signal handling (unix)
-dnl - Add SIGHUP handler (unix)
-dnl - Add creation of pidfile (unix)
-dnl - Add action 'top' in rc file (RH)
-dnl - Add entry 'SIGNALS' to manpage
-dnl - Add exit message to logfile (unix)
-dnl
-dnl Revision 1.23  2001/12/09 20:24:42  david__schmidt
-dnl Change from "alpha" to "beta" in configure.in
-dnl
-dnl Revision 1.22  2001/12/01 11:24:01  jongfoster
-dnl Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
-dnl make break in a more obvious way.
-dnl
-dnl Revision 1.21  2001/11/30 21:35:54  jongfoster
-dnl Bumping version number to 2.9.10
-dnl
-dnl Revision 1.20  2001/10/23 21:24:09  jongfoster
-dnl Support for FEATURE_CGI_EDIT_ACTIONS
-dnl
-dnl Revision 1.19  2001/10/07 15:33:14  oes
-dnl Removed FEATURE_DENY_GZIP
-dnl Bumped up version number
-dnl
-dnl Revision 1.18  2001/09/13 13:10:24  steudten
-dnl
-dnl PreWork for Debug Interface.
-dnl Add new option "--with-debug" to enable debugging (flags aso.)
-dnl
-dnl Revision 1.17  2001/09/12 23:44:55  david__schmidt
-dnl Mac OSX (Darwin) support added.
-dnl
-dnl Revision 1.16  2001/09/12 22:55:45  joergs
-dnl AmigaOS support added.
-dnl
-dnl Revision 1.15  2001/09/12 17:28:59  david__schmidt
-dnl
-dnl OS/2 port: update autoconf'd support for the platform.
-dnl
-dnl Revision 1.14  2001/07/30 22:12:11  jongfoster
-dnl Fixing Solaris build (I hope) and tidying up #defines:
-dnl - All feature #defines are now of the form FEATURE_xxx
-dnl - Permanently turned off WIN_GUI_EDIT
-dnl - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
-dnl
-dnl Revision 1.13  2001/07/29 17:09:17  jongfoster
-dnl Major changes to build system in order to fix these bugs:
-dnl - pthreads under Linux was broken - changed -lpthread to -pthread
-dnl - Compiling in MinGW32 mode under CygWin now correctly detects
-dnl   which shared libraries are available
-dnl - Solaris support (?) (Not tested under Solaris yet)
-dnl
-dnl Revision 1.12  2001/07/25 19:16:27  oes
-dnl Bumping version number to 2.9.8
-dnl
-dnl Revision 1.11  2001/07/21 18:00:07  jongfoster
-dnl Bumping version number to 2.9.7
-dnl
-dnl Revision 1.10  2001/07/18 17:25:04  oes
-dnl Fixed a typo
-dnl
-dnl Revision 1.9  2001/07/15 19:45:13  jongfoster
-dnl Added support for linking with POSIX threads library
-dnl
-dnl Revision 1.8  2001/07/15 17:54:29  jongfoster
-dnl Renaming #define STATIC to STATIC_PCRE
-dnl Adding new #define FEATURE_PTHREAD that will be used to enable
-dnl POSIX threads support.
-dnl
-dnl Revision 1.7  2001/07/13 13:58:05  oes
-dnl    Completely reorganized the selection scheme for
-dnl    pcre, pcreposix, pcrs and gnu_regex:
-dnl
-dnl    The presence of shared pcre, pcreposix or pcrs
-dnl    libraried is now autodetected. Additionally, the
-dnl    user can enforce using the built-in static variants
-dnl    by specifying --disable-dynamic-(pcre|pcrs).
-dnl    Care is taken to avoid that pcre is dyn, while pcreposix
-dnl    is static, if both are used and that pcrs is static if
-dnl    pcrs is.
-dnl
-dnl    The choice between pcre, gnu or no regex for actionsfile
-dnl    URL matching is now via
-dnl    --(enable|disable)-regex-matching[=(gnu|pcre|no)] with the
-dnl    default being pcre.
-dnl
-dnl Revision 1.6  2001/06/29 21:56:40  oes
-dnl Version -> 2.9.5
-dnl
-dnl Revision 1.5  2001/06/29 13:26:27  oes
-dnl Introduced #define CODE_STATUS
-dnl
-dnl Revision 1.4  2001/05/29 09:50:24  jongfoster
-dnl Unified blocklist/imagelist/permissionslist.
-dnl File format is still under discussion, but the internal changes
-dnl are (mostly) done.
-dnl
-dnl Also modified interceptor behaviour:
-dnl - We now intercept all URLs beginning with one of the following
-dnl   prefixes (and *only* these prefixes):
-dnl     * http://i.j.b/
-dnl     * http://ijbswa.sf.net/config/
-dnl     * http://ijbswa.sourceforge.net/config/
-dnl - New interceptors "home page" - go to http://i.j.b/ to see it.
-dnl - Internal changes so that intercepted and fast redirect pages
-dnl   are not replaced with an image.
-dnl - Interceptors now have the option to send a binary page direct
-dnl   to the client. (i.e. ijb-send-banner uses this)
-dnl - Implemented show-url-info interceptor.  (Which is why I needed
-dnl   the above interceptors changes - a typical URL is
-dnl   "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
-dnl   The previous mechanism would not have intercepted that, and
-dnl   if it had been intercepted then it then it would have replaced
-dnl   it with an image.)
-dnl
-dnl Revision 1.3  2001/05/22 18:46:04  oes
-dnl
-dnl - Enabled filtering banners by size rather than URL
-dnl   by adding patterns that replace all standard banner
-dnl   sizes with the "Junkbuster" gif to the re_filterfile
-dnl
-dnl - Enabled filtering WebBugs by providing a pattern
-dnl   which kills all 1x1 images
-dnl
-dnl - Added support for PCRE_UNGREEDY behaviour to pcrs,
-dnl   which is selected by the (nonstandard and therefore
-dnl   capital) letter 'U' in the option string.
-dnl   It causes the quantifiers to be ungreedy by default.
-dnl   Appending a ? turns back to greedy (!).
-dnl
-dnl - Added a new interceptor ijb-send-banner, which
-dnl   sends back the "Junkbuster" gif. Without imagelist or
-dnl   MSIE detection support, or if tinygif = 1, or the
-dnl   URL isn't recognized as an imageurl, a lame HTML
-dnl   explanation is sent instead.
-dnl
-dnl - Added new feature, which permits blocking remote
-dnl   script redirects and firing back a local redirect
-dnl   to the browser.
-dnl   The feature is conditionally compiled, i.e. it
-dnl   can be disabled with --disable-fast-redirects,
-dnl   plus it must be activated by a "fast-redirects"
-dnl   line in the config file, has its own log level
-dnl   and of course wants to be displayed by show-proxy-args
-dnl   Note: Boy, all the #ifdefs in 1001 locations and
-dnl   all the fumbling with configure.in and acconfig.h
-dnl   were *way* more work than the feature itself :-(
-dnl
-dnl - Because a generic redirect template was needed for
-dnl   this, tinygif = 3 now uses the same.
-dnl
-dnl - Moved GIFs, and other static HTTP response templates
-dnl   to project.h
-dnl
-dnl - Some minor fixes
-dnl
-dnl - Removed some >400 CRs again (Jon, you really worked
-dnl   a lot! ;-)
-dnl
-dnl Revision 1.2  2001/05/20 01:21:20  jongfoster
-dnl Version 2.9.4 checkin.
-dnl - Merged popupfile and cookiefile, and added control over PCRS
-dnl   filtering, in new "permissionsfile".
-dnl - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
-dnl   file error you now get a message box (in the Win32 GUI) rather
-dnl   than the program exiting with no explanation.
-dnl - Made killpopup use the PCRS MIME-type checking and HTTP-header
-dnl   skipping.
-dnl - Removed tabs from "config"
-dnl - Moved duplicated url parsing code in "loaders.c" to a new funcition.
-dnl - Bumped up version number.
-dnl
-dnl Revision 1.1.1.1  2001/05/15 13:58:50  oes
-dnl Initial import of version 2.9.3 source tree
-dnl
-dnl 
-
-
-dnl =================================================================
-dnl AutoConf Initialization
-dnl =================================================================
-
-AC_REVISION($Revision: 1.126 $)
-AC_INIT(jcc.c)
-
-if test ! -f config.h.in; then
-   echo "You need to run autoheader first. "
-   echo -n "Shall I do this for you now? (y/n) "
-   read answer
-   if test "$answer" != "y"; then
-      exit 1
-   else
-      autoheader
-  fi
-fi  
-
-AC_CONFIG_HEADER([config.h])
-AC_CANONICAL_HOST
-
-dodk=auto
-DKPREFIX=none
-AC_ARG_WITH(docbook, dnl
-  --with-docbook=[[yes|no|directory]]	
-                           Enable docbook documentation creation 
-			   (default = yes, for gnu and linux),[dnl
-case "$with_docbook" in
-yes) dodk=yes;;
-no) dodk=no;;
-*) 
-	dodk=yes
-	DKPREFIX=$withval
-	;;
-esac
-])
-DB2HTML=false
-AC_ARG_WITH(db2html, dnl
-  --with-db2html=<path/executable>
-                          Set the location of the docbook to html converter
-                          (default = search),[dnl
-DB2HTML=$withval
-])
-
-dnl =================================================================
-dnl Application version number
-dnl =================================================================
-
-VERSION_MAJOR=3
-VERSION_MINOR=0
-VERSION_POINT=12
-CODE_STATUS="stable"
-
-dnl CODE_STATUS can be "alpha", "beta", or "stable", and will be
-dnl used for CGI output. Set version to 0.0.0 and status to "UNRELEASED"
-dnl whenever CVS in a stable branch differs from the last release.
-
-dnl =================================================================
-dnl Substitute the version numbers
-dnl =================================================================
-
-AC_SUBST(VERSION_MAJOR)
-AC_SUBST(VERSION_MINOR)
-AC_SUBST(VERSION_POINT)
-AC_SUBST(CODE_STATUS)
-
-dnl
-AC_DEFINE_UNQUOTED(VERSION_MAJOR,${VERSION_MAJOR})
-AC_DEFINE_UNQUOTED(VERSION_MINOR,${VERSION_MINOR})
-AC_DEFINE_UNQUOTED(VERSION_POINT,${VERSION_POINT})
-AC_DEFINE_UNQUOTED(VERSION,"${VERSION_MAJOR}.${VERSION_MINOR}.${VERSION_POINT}")
-AC_DEFINE_UNQUOTED(CODE_STATUS,"${CODE_STATUS}")
-
-dnl =================================================================
-dnl Checks for programs needed to build.
-dnl =================================================================
-
-dnl Keep AC_PROG_CC from setting its own defaults:
-if test "X$CFLAGS" = "X"; then
-   CFLAGS=" "
-fi
-
-AC_PROG_CC
-AC_PROG_CPP
-AC_PROG_INSTALL
-AC_PROG_LN_S
-AC_PROG_MAKE_SET
-AC_PROG_AWK
-
-AC_CHECK_PROG(GDB,gdb,yes,no)
-AC_PATH_PROG(BGROUPS,groups,no,/bin:/usr/bin:/usr/local/bin)
-AC_PATH_PROG(ID,id,no,/bin:/usr/bin:/usr/local/bin)
-AC_SUBST(ID)
-AC_SUBST(BGROUPS)
-
-dnl =================================================================
-dnl debug, gcc and gdb support 
-dnl =================================================================
-
-AC_ARG_WITH(debug,
-        [  --with-debug            Enable debug mode],
-        [
-                if test "x$withval" != "xno" ; then
-                    if test $ac_cv_prog_cc_g = yes; then
-                      if test "$GCC" = yes; then
-                        if test "$GDB"; then
-                          CFLAGS="$CFLAGS -ggdb"
-                        else
-                          CFLAGS="$CFLAGS -g"
-                        fi
-                        CFLAGS="$CFLAGS -Wshadow  -Wconversion"
-                      else
-                        CFLAGS="$CFLAGS -g"
-                      fi
-                   fi
-                fi
-        ],
-        [
-            if test "X$CFLAGS" = "X "; then # if CFLAGS were unset (see above)
-              if test "$GCC" = yes; then
-                CFLAGS="-O2"
-              fi
-            fi
-        ]
-)
-
-dnl =================================================================
-dnl Check for user and group validity
-dnl =================================================================
-
-
-if test "$EMXOS2" = yes; then
-  echo "Skipping user and group validity stuff.";
-
-else
-
-  $ID privoxy >/dev/null 2>/dev/null
-  if test $? -ne 0 ; then
-   AC_MSG_WARN(There is no user 'privoxy' on this system)
-  fi
-  AC_MSG_CHECKING([for user])
-  AC_ARG_WITH(user,
-        [  --with-user=privoxy          Set user under which privoxy will run],
-        [
-                if test "x$withval" != "xyes"; then
-                  if test $ID = no ; then
-                    AC_MSG_ERROR(There is no 'id' program on this system)
-                  else
-                    AC_MSG_RESULT($with_user)
-                    $ID $with_user 2>/dev/null >/dev/null
-                    if test $? -eq 0 ; then
-                      USER=$with_user;
-                    else
-                      AC_MSG_ERROR(There is no user '$with_user' on this system)
-                    fi
-                  fi
-                  else
-                   AC_MSG_ERROR(We need a user if you give me this parameter)
-                fi
-        ],
-        [
-          if test $ID = no ; then
-            AC_MSG_ERROR(There is no 'id' programm on this system)
-          else
-            AC_MSG_RESULT(none specified)
-            USER=$with_user
-          fi
-        ]
-  )
-  AC_SUBST(USER)
-
-  AC_MSG_CHECKING([for group])
-  AC_ARG_WITH(group,
-        [  --with-group=privoxy         Set group for privoxy],
-        [ 
-                if test "x$withval" != "xyes"; then
-                  if test $BGROUPS = no ; then
-                    AC_MSG_ERROR(There is no 'groups' program on this system)
-                  else
-                    AC_MSG_RESULT($with_group)
-                    $BGROUPS $USER >/dev/null
-                    if test $? -eq 0 ; then
-                    # FIXME: this fails if valid group, but not first group
-                    # listed.
-                      if test "$with_group" != "`$BGROUPS $USER | sed 's/.*: //' 2>/dev/null |$AWK '{print $1}'`" ; then
-                        AC_MSG_ERROR(The given value '$withval' does not match group entry)
-                      else
-                        GROUP=$with_group;
-                      fi
-                    else
-                      AC_MSG_ERROR(There is no group entry for user '$USER')
-                    fi
-                  fi
-                else
-                   AC_MSG_ERROR(We need a group if you give me this parameter)
-                fi
-        ],
-        [
-          if test $BGROUPS = no ; then
-            AC_MSG_ERROR(There is no 'groups' programm on this system)
-          else
-            AC_MSG_RESULT(none specified)
-            GROUP=$with_group;
-          fi
-        ]
-  )
-  AC_SUBST(GROUP)
-
-fi
-
-dnl =================================================================
-dnl additional gcc flags
-dnl =================================================================
-dnl 
-if test "$GCC"; then
-  if test "$host" != "powerpc-unknown-amigaos"; then
-    CFLAGS="-pipe $CFLAGS"
-  fi
-fi
-
-
-dnl =================================================================
-dnl Build type
-dnl =================================================================
-dnl
-dnl Must do this first.
-dnl
-dnl Reason: This sets CFLAGS in order to switch the Cygwin compiler
-dnl into Cygwin or MinGW32 modes.  Depending on the mode selected,
-dnl the compiler will use completely different sets of library
-dnl and include files.
-dnl 
-dnl =================================================================
-
-AC_MINGW32
-AC_CYGWIN
-
-if test "$MINGW32" = "yes"; then
-  target_type=mingw
-else
-  if test "$CYGWIN" = "yes"; then
-    target_type=cygwin
-  else
-    target_type=unix
-  fi
-fi
-
-if test $dodk = auto; then
-	dodk=no
-	if test $target_type = unix; then
-		case "$host_os" in
-		linux* | gnu*)
-			dodk=yes
-		;;
-		esac
-	fi
-fi
-
-dnl Decide what to do based on target_type
-dnl Note: PTHREAD_LIB is always set, even if pthread is disabled.
-dnl This is because we don't know yet whether pthread is enabled.
-
-AC_ARG_ENABLE(mingw32,
-[  --enable-mingw32                Use mingw32 for a Windows GUI],
-[if test $enableval = yes; then
-  target_type=mingw
-fi])
-
-if test $target_type = mingw; then
-  WIN_ONLY=
-  SPECIAL_CFLAGS="-mwindows -mno-cygwin"
-  PTHREAD_LIB=-lpthreadGC
-  echo "Using mingw32 (Win32 GUI)"
-else
-  WIN_ONLY=#
-  if test $target_type = cygwin; then
-    SPECIAL_CFLAGS="-mno-win32"
-    PTHREAD_LIB=
-    echo "Using Cygnus (Win32 command line)"
-  else
-    SPECIAL_CFLAGS=
-dnl    PTHREAD_LIB=-lpthread
-  fi
-fi
-AC_SUBST(WIN_ONLY)
-
-dnl Checking which text html browser we have avaliable
-if test $dodk != no; then
-	AC_CHECK_PROGS(WDUMP,w3m lynx links,false)
-	if test "$WDUMP" = false; then
-		AC_MSG_WARN(You need some kind of text browser to build documentation \(w3m, lynx and links are supported\))
-	fi
-	if test $DB2HTML = false; then
-		dnl We need to clean the variable, otherwise AC_CHECK_PROGS
-		dnl will fail	
-		DB2HTML=""
-		AC_CHECK_PROGS(DB2HTML,db2html docbook2html,false)
-	fi
-fi
-AC_SUBST(WDUMP)
-AC_SUBST(DB2HTML)
-
-dnl If we use rpm, we need to check where %_topdir is
-AC_CHECK_PROGS(RPMBIN,rpm,false)
-if test $RPMBIN != false; then
-		RPM_BASE=`rpm --eval "%{_topdir}"`
-		if test "$RPM_BASE" = ""; then
-			RPM_BASE=/usr/src/redhat
-		fi
-fi
-AC_SUBST(RPM_BASE)
-
-dnl Check for jade, so we can build the documentation
-AC_CHECK_PROGS(JADEBIN,jade openjade,false)
-AC_SUBST(JADEBIN)
-
-dnl Check for man2html for docs.
-AC_CHECK_PROGS(MAN2HTML,man2html,false)
-AC_SUBST(MAN2HTML)
-
-dnl Set doc status flag for conditional content inclusions
-DOC_STATUS=p-not-stable
-if  test $CODE_STATUS = stable; then
-     DOC_STATUS="p-stable"
-fi
-AC_SUBST(DOC_STATUS)
-
-dnl Checking for the docbook.dsl stylesheet file
-dnl It is still not portable (directory slash)
-JADECAT=""
-if test $dodk = yes; then
-  if test $DKPREFIX = none; then
-    for i in /usr/share/sgml/docbook/dsssl-stylesheets \
-             /usr/share/sgml/docbkdsl /usr/share/sgml/docbook-dsssl \
-             /usr/local/share/sgml/docbook/dsssl/modular \
-             /usr/share/sgml/docbook/stylesheet/dsssl/modular/ \
-             ; do
-dnl  echo -n does not fly with /bin/sh.
-dnl      echo -n "checking for $i/html/docbook.dsl..."
-      AC_MSG_CHECKING([for $i])
-      if test -f $i/html/docbook.dsl; then
-        echo "yes"
-        DKPREFIX=$i
-        break
-      else
-        echo "no"
-      fi
-    done
-# where are the catalogs?
-    for i in /usr/share/sgml/CATALOG.docbk30 \
-             /usr/share/sgml/CATALOG.docbk31 \
-             /usr/share/sgml/CATALOG.docbk31 \
-             /usr/local/share/sgml/docbook/3.0/docbook.cat \
-             /usr/local/share/sgml/docbook/3.1/docbook.cat \
-             /usr/share/sgml/docbook/dtd/3.1/docbook.cat \
-             ; do
-dnl     echo -n "checking for $i..."
-      AC_MSG_CHECKING([for $i])
-      if test -f $i; then
-        echo "yes"
-        JADECAT="$JADECAT -c $i"
-      else
-        echo "no"
-      fi
-    done
-  fi
-fi
-AC_SUBST(JADECAT)
-AC_SUBST(DKPREFIX)
-
-dnl Save old CFLAGS so we can restore them later, then add SPECIAL_CFLAGS
-old_CFLAGS_nospecial=$CFLAGS
-CFLAGS="$CFLAGS $SPECIAL_CFLAGS"
-
-# Hack to force AutoConf to use the CFLAGS we just set
-dnl Warning: This may break with a future version of Autoconf
-dnl          Tested with autoconf 2.13
-ac_cpp='$CPP $CPPFLAGS $SPECIAL_CFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-
-
-dnl =================================================================
-dnl Thread support
-dnl =================================================================
-
-AC_CHECK_HEADER(pthread.h, [have_pthread=yes], [have_pthread=no])
-
-AC_ARG_ENABLE(pthread,
-[  --disable-pthread               Don't use POSIX threads (pthreads)],
-[if test $enableval = no; then
-  # Disable pthreads
-  if test $have_pthread = yes; then
-     AC_MSG_WARN([pthreads seem to be available but you are using --disable-pthread.]) 
-     AC_MSG_WARN([This is almost always a mistake and can render Privoxy unacceptable slow.])
-  fi
-  have_pthread=no
-fi])
-
-if test $have_pthread = yes; then
-  PTHREAD_ONLY=
-  AC_DEFINE(FEATURE_PTHREAD)
-  echo Using POSIX threads
-  if test "$GCC" = "yes"; then
-    # Set a GCC specific switch:
-    if test "$target_type" = "unix"; then
-      ac_jgf_save_CFLAGS=$CFLAGS
-      CFLAGS="$CFLAGS -pthread"
-      AC_TRY_LINK([#include <pthread.h>],
-        [void *p = pthread_create;],
-        [
-          # This compiler switch makes GCC on Linux thread-safe
-          # However, it's not supported on most other OS.
-          PTHREAD_LIB=
-          SPECIAL_CFLAGS="-pthread"
-        ])
-      CFLAGS=$ac_jgf_save_CFLAGS
-    fi
-  fi
-else
-  PTHREAD_ONLY=#
-  echo Using native threads
-fi
-
-AC_SUBST(PTHREAD_ONLY)
-
-dnl =================================================================
-dnl Support for thread-safe versions of gethostbyaddr, gethostbyname,
-dnl gmtime and localtime
-dnl =================================================================
-
-dnl Next line needed to find the gethost*_r functions on Solaris
-AC_CHECK_LIB(nsl, gethostbyname)
-
-AC_CHECK_FUNC(gethostbyaddr_r, [
-  AC_MSG_CHECKING([signature of gethostbyaddr_r])
-  AC_TRY_COMPILE([
-#   include <netdb.h>
-  ], [
-    struct hostent *h, *hp;
-    char *a, *b;
-    int l, bl, t, e;
-    (void) gethostbyaddr_r(a, l, t, h, b, bl, &hp, &e)
-  ], [
-    AC_DEFINE(HAVE_GETHOSTBYADDR_R_8_ARGS)
-    AC_MSG_RESULT([8 args])
-  ], [
-    AC_TRY_COMPILE([
-#     include <netdb.h>
-    ], [
-      struct hostent *h;
-      char *a, *b;
-      int l, bl, t, e;
-      (void) gethostbyaddr_r(a, l, t, h, b, bl, &e)
-    ], [
-      AC_DEFINE(HAVE_GETHOSTBYADDR_R_7_ARGS)
-      AC_MSG_RESULT([7 args])
-    ], [
-      AC_TRY_COMPILE([
-#       include <netdb.h>
-      ], [
-        struct hostent_data *d;
-        struct hostent *h;
-        char a,
-        int l, t;
-        (void) gethostbyaddr_r(a, l, t, h, d)
-      ], [
-        AC_DEFINE(HAVE_GETHOSTBYADDR_R_5_ARGS)
-        AC_MSG_RESULT([5 args])
-      ], [
-        AC_MSG_RESULT(unrecognised)
-      ])
-    ])
-  ])
-], [
-  AC_MSG_RESULT(no)
-])
-
-AC_CHECK_FUNC(gethostbyname_r, [
-  AC_MSG_CHECKING([signature of gethostbyname_r])
-  AC_TRY_COMPILE([
-#   include <netdb.h>
-  ], [
-    struct hostent *h, *r;
-    char *n, *b;
-    int bl, e;
-    (void) gethostbyname_r(n, h, b, bl, &r, &e)
-  ], [
-    AC_DEFINE(HAVE_GETHOSTBYNAME_R_6_ARGS)
-    AC_MSG_RESULT([6 args])
-  ], [
-    AC_TRY_COMPILE([
-#     include <netdb.h>
-    ], [
-      struct hostent *h;
-      char *n, *b;
-      int bl, e;
-      (void) gethostbyname_r(n, h, b, bl, &e)
-    ], [
-      AC_DEFINE(HAVE_GETHOSTBYNAME_R_5_ARGS)
-      AC_MSG_RESULT([5 args])
-    ], [
-      AC_TRY_COMPILE([
-#       include <netdb.h>
-      ], [
-        struct hostent_data *d;
-        struct hostent *h;
-        char *n,
-        (void) gethostbyname_r(n, h, d)
-      ], [
-        AC_DEFINE(HAVE_GETHOSTBYNAME_R_3_ARGS)
-        AC_MSG_RESULT([3 args])
-      ], [
-        AC_MSG_RESULT(unrecognised)
-      ])
-    ])
-  ])
-], [
-  AC_MSG_RESULT(no)
-])
-
-AC_CHECK_FUNC(gmtime_r, [
-  AC_MSG_CHECKING([signature of gmtime_r])
-  AC_TRY_COMPILE([
-#   include <time.h>
-  ], [
-    struct time *t;
-    struct tm *tm;
-    (void) gmtime_r(t, tm)
-  ], [
-    AC_MSG_RESULT(ok)
-    AC_DEFINE(HAVE_GMTIME_R)
-  ], [
-    AC_MSG_RESULT(unrecognised)
-  ])
-], [
-  AC_MSG_RESULT(no)
-])
-
-AC_CHECK_FUNC(localtime_r, [
-  AC_MSG_CHECKING([signature of localtime_r])
-  AC_TRY_COMPILE([
-#   include <time.h>
-  ], [
-    struct time *t;
-    struct tm *tm;
-    (void) localtime_r(t, tm)
-  ], [
-    AC_MSG_RESULT(ok)
-    AC_DEFINE(HAVE_LOCALTIME_R)
-  ], [
-    AC_MSG_RESULT(unrecognised)
-  ])
-], [
-  AC_MSG_RESULT(no)
-])
-
-dnl =================================================================
-dnl Solaris specific
-dnl FIXME: Not tested on Solaris yet...
-dnl ISFIXED: Have tested it on Solaris, but there are other ways to
-dnl 	make these checks generic, e.g.:
-dnl AC_CHECK_FUNC(getsockopt, , AC_CHECK_LIB(socket, getsockopt))
-dnl	(Moritz Barsnick <moritz@xxxxxxxxxxxx>)
-dnl =================================================================
-
-
-SOCKET_LIB=
-
-case "$host" in
-*-solaris*) SOCKET_LIB="-lsocket -lnsl"
-            AC_DEFINE(__EXTENSIONS__)
-            if test "$GCC" = "yes"; then
-              # Set a GCC specific switch:
-              # This compiler switch makes Solaris thread-safe
-              PTHREAD_LIB=
-              SPECIAL_CFLAGS="-pthreads"
-            else
-              # What do we do without GCC? Guess this:
-              SPECIAL_CFLAGS="-D_REENTRANT"
-            fi
-;;
-esac
-
-AC_SUBST(SOCKET_LIB)
-
-dnl =================================================================
-dnl Solaris problem, and others perhaps (socklen_t is undefined)
-dnl =================================================================
-
-AC_MSG_CHECKING([for socklen_t])
-AC_EGREP_HEADER(socklen_t, sys/socket.h, AC_MSG_RESULT([yes]),
-	AC_MSG_RESULT([no])
-	AC_DEFINE(socklen_t,int,
-		[ Define to 'int' if <sys/socket.h> doesn't have it. ]))
-
-
-dnl =================================================================
-dnl OS/2 specific
-dnl =================================================================
-
-case "$host" in
-*-os2-emx*) SOCKET_LIB=-lsocket
-;;
-esac
-
-AC_SUBST(SOCKET_LIB)
-
-dnl =================================================================
-dnl Mac OSX specific
-dnl =================================================================
-    
-case "$host" in
-*-apple-darwin*) SPECIAL_CFLAGS="-Dunix"
-;;  
-esac
-
-dnl =================================================================
-dnl OpenBSD specific
-dnl =================================================================
-
-case "$host" in
-*-openbsd*) SPECIAL_CFLAGS="$SPECIAL_CFLAGS -Dunix"
-;;
-esac
-
-dnl =================================================================
-dnl AmigaOS specific
-dnl =================================================================
-
-AMIGAOS_ONLY=#
-
-case "$host" in
-*-amigaos) AMIGAOS_ONLY=
-;;
-esac
-
-AC_SUBST(AMIGAOS_ONLY)
-
-dnl =================================================================
-dnl Check for standard compiler stuff
-dnl =================================================================
-
-AC_EXEEXT
-AC_OBJEXT
-AC_HEADER_STDC
-AC_HEADER_DIRENT
-AC_C_CONST
-AC_TYPE_SIZE_T
-AC_TYPE_PID_T
-AC_HEADER_TIME
-AC_STRUCT_TM
-AC_CHECK_SIZEOF(int, 4)
-AC_CHECK_SIZEOF(char *, 4)
-AC_CHECK_SIZEOF(long, 4)
-AC_CHECK_SIZEOF(long long, 8)
-AC_CHECK_SIZEOF(size_t, 4)
-
-dnl Checks for header files.
-dnl AC_HEADER_SYS_WAIT
-dnl AC_CHECK_HEADERS(fcntl.h limits.h malloc.h sys/time.h unistd.h)
-AC_CHECK_HEADERS([OS.h arpa/inet.h errno.h fcntl.h limits.h locale.h netdb.h netinet/in.h stddef.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h sys/timeb.h sys/wait.h unistd.h])
-
-dnl Checks for library functions.
-dnl AC_TYPE_SIGNAL
-dnl AC_CHECK_FUNC(strstr)
-dnl bcopy and memmove are for PCRE
-AC_CHECK_FUNCS([strerror bcopy memmove])
-AC_PROG_GCC_TRADITIONAL
-dnl uncommenting does not work for swa. suse linux
-dnl AC_FUNC_MALLOC
-AC_FUNC_SETPGRP
-AC_TYPE_SIGNAL
-dnl uncommenting does not work for swa. suse linux
-dnl AC_FUNC_STAT
-AC_CHECK_FUNCS([access atexit getcwd gethostbyaddr gethostbyaddr_r gethostbyname gethostbyname_r gettimeofday inet_ntoa localtime_r memchr memmove memset poll putenv random regcomp select setlocale snprintf socket strchr strdup strerror strftime strlcat strlcpy strptime strstr strtoul timegm tzset])
-
-
-dnl =================================================================
-dnl Checks for libraries.
-dnl =================================================================
-dnl Note: Some systems may have the library but not the system header
-dnl       file, so we must check for both.
-dnl       Also check for correct version
-AC_CHECK_LIB(pcre, pcre_compile, [
-   AC_CHECK_HEADER(pcre.h, [
-      AC_EGREP_HEADER(pcre_fullinfo, pcre.h, [have_pcre=yes], [AC_MSG_WARN([[pcre old version installed]]); have_pcre=no])
-   ], [
-      AC_CHECK_HEADER(pcre/pcre.h, [
-         AC_EGREP_HEADER(pcre_fullinfo, pcre/pcre.h, [have_pcre=yes]; [AC_DEFINE(PCRE_H_IN_SUBDIR)], [AC_MSG_WARN([[pcre old version installed]]); have_pcre=no])
-      ], [have_pcre=no])
-   ])
-], [have_pcre=no])
- 
-AC_CHECK_LIB(pcreposix, regcomp, [
-   AC_CHECK_HEADER(pcreposix.h, [
-      AC_EGREP_HEADER(pcreposix_regerror, pcreposix.h, [AC_MSG_WARN([[pcreposix old version installed]]); have_pcreposix=no], [have_pcreposix=yes])
-   ], [
-      AC_CHECK_HEADER(pcre/pcreposix.h, [
-         AC_EGREP_HEADER(pcreposix_regerror, pcre/pcreposix.h, [AC_MSG_WARN([[pcreposix old version installed]]); have_pcreposix=no], [have_pcreposix=yes]; [AC_DEFINE(PCREPOSIX_H_IN_SUBDIR)])
-      ], [have_pcreposix=no])
-   ])
-], [have_pcreposix=no], -lpcre) 
-
-dnl ================================================================
-dnl libpcrs is temporarily disabled.
-dnl
-dnl Privoxy's own pcrs version fixes some problems that
-dnl are present in libpcrs 0.3, the last pcrs release we
-dnl know of, and as libpcrs seems to be currently unmaintained
-dnl we can't send these fixes upstream.
-dnl ================================================================
-dnl
-dnl AC_CHECK_LIB(pcrs, pcrs_compile, [AC_CHECK_HEADER(pcrs.h, [have_pcrs=yes], [have_pcrs=no])], [have_pcrs=no], -lpcre)
-
-dnl =================================================================
-dnl Always defined
-dnl =================================================================
-
-AC_DEFINE(__MT__)
-
-dnl =================================================================
-dnl Features
-dnl =================================================================
-
-AC_ARG_ENABLE(toggle,
-[  --disable-toggle                Don't support temporary disable],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_TOGGLE)
-fi],AC_DEFINE(FEATURE_TOGGLE))
-
-AC_ARG_ENABLE(force,
-[  --disable-force                 Don't allow single-page disable],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_FORCE_LOAD)
-fi],AC_DEFINE(FEATURE_FORCE_LOAD))
-
-AC_ARG_ENABLE(fast-redirects,
-[  --disable-fast-redirects        Don't support fast redirects],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_FAST_REDIRECTS)
-fi], AC_DEFINE(FEATURE_FAST_REDIRECTS))
-
-AC_ARG_ENABLE(stats,
-[  --disable-stats                 Don't keep statistics],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_STATISTICS)
-fi],AC_DEFINE(FEATURE_STATISTICS))
-
-AC_ARG_ENABLE(ie-images,
-[  --enable-ie-images              Enable a quick but not always reliable auto-detect whether requests from
-                                  MS Internet Explorer are for an image or not.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_IMAGE_DETECT_MSIE)
-fi],)
-
-AC_ARG_ENABLE(image-blocking,
-[  --disable-image-blocking        Don't try to figure out whether a request is 
-                                  for an image or HTML - assume HTML.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_IMAGE_BLOCKING)
-fi],
-AC_DEFINE(FEATURE_IMAGE_BLOCKING))
-
-AC_ARG_ENABLE(acl-files,
-[  --disable-acl-files             Prevents the use of ACL files to control access to
-                                  Privoxy by IP address.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_ACL)
-fi],
-AC_DEFINE(FEATURE_ACL))
-
-AC_ARG_ENABLE(trust-files,
-[  --disable-trust-files           Prevents the use of trust files.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_TRUST)
-fi],
-AC_DEFINE(FEATURE_TRUST))
-
-AC_ARG_ENABLE(editor,
-[  --disable-editor                Prevents the use of the web-based actions file
-                                  editor and web-based temporary disable setting.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_CGI_EDIT_ACTIONS)
-fi],
-AC_DEFINE(FEATURE_CGI_EDIT_ACTIONS))
-
-AC_ARG_ENABLE(no-gifs,
-[  --enable-no-gifs                Use politically correct PNG format instead of GIF
-                                  for built-in images. May not work with all browsers.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_NO_GIFS)
-fi])
-
-AC_ARG_ENABLE(graceful-termination,
-[  --enable-graceful-termination   Allow to shutdown Privoxy through the webinterface.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_GRACEFUL_TERMINATION)
-fi])
-
-AC_ARG_ENABLE(extended-host-patterns,
-[  --enable-extended-host-patterns Allow extended regular expressions in host patterns.],
-[if test $enableval = yes; then
-  AC_DEFINE(FEATURE_EXTENDED_HOST_PATTERNS)
-fi])
-
-dnl pcre/pcrs is needed for CGI anyway, so
-dnl the choice is only between static and
-dnl dynamic:
-
-AC_ARG_ENABLE(dynamic-pcre,
-[  --disable-dynamic-pcre          Use the built-in, static pcre, even if libpcre is available],
-[ if test $enableval = "no"; then have_pcre=no; fi ])
-
-dnl =================================================
-dnl libpcrs is temporarily disabled,
-dnl see comment above for the reason.
-dnl =================================================
-dnl AC_ARG_ENABLE(dynamic-pcrs,
-dnl [  --disable-dynamic-pcrs          Use the built-in, static pcrs, even if libpcrs is available],
-dnl [ if test $enableval = "no"; then have_pcrs=no; fi ])
-
-
-dnl ====================================================
-dnl This check is incomplete. For mingw32 zlib is found
-dnl by configure, but not necessarily by the compiler.
-dnl ====================================================
-AC_ARG_ENABLE(zlib,
-[  --disable-zlib                  Don't use zlib to decompress data before filtering.],
-[enableval2=$enableval],
-[enableval2=yes])
-if test $enableval2 = yes; then
-  AC_CHECK_LIB(z, zlibVersion, [have_zlib="yes"], [have_zlib="no"])
-  if test $have_zlib = "yes"; then
-    LIBS="$LIBS -lz"
-    AC_DEFINE(FEATURE_ZLIB,1,[Define to 1 to use compression through the zlib library.])
-  else
-   AC_MSG_WARN([No zlib found.
-   Privoxy will not be able to filter compressed content.
-   This may become a fatal error in the future.])
-  fi  
-fi
-
-
-# If we have libpcre and either we also have pcreposix or
-# we don't need pcreposix, then link pcre dynamically; else
-# build it and link statically
-#
-if test $have_pcre = "yes"; then
-  echo "using libpcre"
-  pcre_dyn=yes
-  STATIC_PCRE_ONLY=#
-  LIBS="$LIBS -lpcre -lpcreposix"
-else
-  AC_MSG_WARN([You are using the static PCRE code which is scheduled for removal, for details see: 
-    https://sourceforge.net/mailarchive/message.php?msg_id=20080511195555.2dc6cfdc%40fabiankeil.de])
-  pcre_dyn=no
-  AC_DEFINE(STATIC_PCRE)
-  STATIC_PCRE_ONLY=
-fi
-
-if test $have_pthread = "yes" -o $target_type = "mingw"; then
-  echo Enabling keep-alive support for outgoing connections.
-  AC_DEFINE(FEATURE_CONNECTION_KEEP_ALIVE)
-fi
-
-dnl =================================================
-dnl libpcrs is temporarily disabled,
-dnl see comment above for the reason.
-dnl =================================================
-dnl # If we have libpcrs and pcre is linked dynamically
-dnl # then also link pcrs dynamically, else build and link
-dnl # pcrs statically
-dnl
-dnl if test $have_pcrs = "yes" -a $pcre_dyn = "yes"; then
-dnl  echo "using libpcrs"
-dnl  STATIC_PCRS_ONLY=#
-dnl  LIBS="$LIBS -lpcrs"
-dnl else
-dnl  echo "using built-in static pcrs"
-  AC_DEFINE(STATIC_PCRS)
-  STATIC_PCRS_ONLY=
-dnl fi
-
-AC_SUBST(STATIC_PCRE_ONLY)
-AC_SUBST(STATIC_PCRS_ONLY)
-
-dnl =================================================================
-dnl Final cleanup and output
-dnl =================================================================
-
-dnl Remove the SPECIAL_CFLAGS stuff from CFLAGS, and add it seperately
-dnl in the Makefile
-CFLAGS=$old_CFLAGS_nospecial
-AC_SUBST(SPECIAL_CFLAGS)
-
-AC_SUBST(PTHREAD_LIB)
-
-AC_OUTPUT(GNUmakefile doc/source/ldp.dsl)
diff --git a/external/privoxy/cygwin.h b/external/privoxy/cygwin.h
deleted file mode 100644
index 526f8d0..0000000
--- a/external/privoxy/cygwin.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef CYGWIN_H_INCLUDED
-#define CYGWIN_H_INCLUDED
-#define CYGWIN_H_VERSION "$Id: cygwin.h,v 1.6 2006/07/18 14:48:45 david__schmidt Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/cygwin.h,v $
- *
- * Purpose     :  The windows.h file seems to be a *tad* different, so I
- *                will bridge the gaps here.  Perhaps I should convert the
- *                latest SDK too?  Shudder, I think not.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: cygwin.h,v $
- *    Revision 1.6  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.4  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.3  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.2  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:51  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-/* Conditionally include this whole file. */
-#ifdef __MINGW32__
-
-/* Hmmm, seems to be overlooked. */
-#define _RICHEDIT_VER 0x0300
-
-/*
- * Named slightly different ... but not in Cygwin v1.3.1 ...
- *
- * #define LVITEM   LV_ITEM
- * #define LVCOLUMN LV_COLUMN
- */
-
-#endif /* def __MINGW32__ */
-#endif /* ndef CYGWIN_H_INCLUDED */
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/deanimate.c b/external/privoxy/deanimate.c
deleted file mode 100644
index 01fc97c..0000000
--- a/external/privoxy/deanimate.c
+++ /dev/null
@@ -1,554 +0,0 @@
-const char deanimate_rcs[] = "$Id: deanimate.c,v 1.19 2008/05/21 15:29:35 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/deanimate.c,v $
- *
- * Purpose     :  Declares functions to manipulate binary images on the
- *                fly.  High-level functions include:
- *                  - Deanimation of GIF images
- *                
- *                Functions declared include: gif_deanimate, buf_free,
- *                buf_copy,  buf_getbyte, gif_skip_data_block
- *                and gif_extract_image
- *
- * Copyright   :  Written by and Copyright (C) 2001 - 2004, 2006 by the
- *                SourceForge Privoxy team. http://www.privoxy.org/
- *
- *                Based on the GIF file format specification (see
- *                http://tronche.com/computer-graphics/gif/gif89a.html)
- *                and ideas from the Image::DeAnim Perl module by
- *                Ken MacFarlane, <ksm+cpan@xxxxxxxxxxxxxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: deanimate.c,v $
- *    Revision 1.19  2008/05/21 15:29:35  fabiankeil
- *    Fix gcc43 warnings.
- *
- *    Revision 1.18  2008/03/28 15:13:38  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.17  2007/08/05 13:42:22  fabiankeil
- *    #1763173 from Stefan Huehner: declare some more functions static.
- *
- *    Revision 1.16  2007/07/14 08:01:58  fabiankeil
- *    s@failiure@failure@
- *
- *    Revision 1.15  2007/01/03 14:39:19  fabiankeil
- *    Fix a gcc43 warning and mark the binbuffer
- *    as immutable for buf_getbyte().
- *
- *    Revision 1.14  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.12.2.1  2004/10/03 12:53:32  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.12  2002/05/12 21:36:29  jongfoster
- *    Correcting function comments
- *
- *    Revision 1.11  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.10  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.9  2002/03/13 00:27:04  jongfoster
- *    Killing warnings
- *
- *    Revision 1.8  2002/03/09 19:42:47  jongfoster
- *    Fixing more warnings
- *
- *    Revision 1.7  2002/03/08 17:46:04  jongfoster
- *    Fixing int/size_t warnings
- *
- *    Revision 1.6  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.5  2001/09/10 10:16:06  oes
- *    Silenced compiler warnings
- *
- *    Revision 1.4  2001/07/18 12:28:49  oes
- *    - Added feature for extracting the first frame
- *      to gif_deanimate
- *    - Separated image buffer extension into buf_extend
- *    - Extended gif deanimation to GIF87a (untested!)
- *    - Cosmetics
- *
- *    Revision 1.3  2001/07/15 13:57:50  jongfoster
- *    Adding #includes string.h and miscutil.h
- *
- *    Revision 1.2  2001/07/13 13:46:20  oes
- *    Introduced GIF deanimation feature
- *
- *
- **********************************************************************/
-
-
-#include "config.h"
-
-#include <string.h>
-#include <fcntl.h>
-
-#include "errlog.h"
-#include "project.h"
-#include "deanimate.h"
-#include "miscutil.h"
-
-const char deanimate_h_rcs[] = DEANIMATE_H_VERSION;
-
-/*********************************************************************
- * 
- * Function    :  buf_free
- *
- * Description :  Safely frees a struct binbuffer
- *
- * Parameters  :
- *          1  :  buf = Pointer to the binbuffer to be freed
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void buf_free(struct binbuffer *buf)
-{
-   if (buf == NULL) return;
-
-   if (buf->buffer != NULL)
-   {
-      free(buf->buffer);
-   }
-
-   free(buf);
-
-}
-
-
-/*********************************************************************
- * 
- * Function    :  buf_extend
- *
- * Description :  Ensure that a given binbuffer can hold a given amount
- *                of bytes, by reallocating its buffer if necessary.
- *                Allocate new mem in chunks of 1024 bytes, so we don't
- *                have to realloc() too often.
- *
- * Parameters  :
- *          1  :  buf = Pointer to the binbuffer
- *          2  :  length = Desired minimum size
- *                
- *
- * Returns     :  0 on success, 1 on failure.
- *
- *********************************************************************/
-static int buf_extend(struct binbuffer *buf, size_t length)
-{
-   char *newbuf;
-
-   if (buf->offset + length > buf->size)
-   {
-      buf->size = ((buf->size + length + (size_t)1023) & ~(size_t)1023);
-      newbuf = (char *)realloc(buf->buffer, buf->size);
-
-      if (newbuf == NULL)
-      {
-         freez(buf->buffer);
-         return 1;
-      }
-      else
-      {
-         buf->buffer = newbuf;
-         return 0;
-      }
-   }
-   return 0;
-
-}
-
-
-/*********************************************************************
- * 
- * Function    :  buf_copy
- *
- * Description :  Safely copies a given amount of bytes from one
- *                struct binbuffer to another, advancing the
- *                offsets appropriately.
- *
- * Parameters  :
- *          1  :  src = Pointer to the source binbuffer
- *          2  :  dst = Pointer to the destination binbuffer
- *          3  :  length = Number of bytes to be copied
- *
- * Returns     :  0 on success, 1 on failure.
- *
- *********************************************************************/
-static int buf_copy(struct binbuffer *src, struct binbuffer *dst, size_t length)
-{
-
-   /*
-    * Sanity check: Can't copy more data than we have
-    */
-   if (src->offset + length > src->size) 
-   {
-      return 1;
-   }
-
-   /*
-    * Ensure that dst can hold the new data
-    */
-   if (buf_extend(dst, length)) 
-   {
-      return 1;
-   }
-
-   /*
-    * Now that it's safe, memcpy() the desired amount of
-    * data from src to dst and adjust the offsets
-    */
-   memcpy(dst->buffer + dst->offset, src->buffer + src->offset, length);
-   src->offset += length;
-   dst->offset += length;
-
-   return 0;
-
-}
-
-
-/*********************************************************************
- * 
- * Function    :  buf_getbyte
- *
- * Description :  Safely gets a byte from a given binbuffer at a
- *                given offset
- *
- * Parameters  :
- *          1  :  src = Pointer to the source binbuffer
- *          2  :  offset = Offset to the desired byte
- *
- * Returns     :  The byte on success, or 0 on failure
- *
- *********************************************************************/
-static unsigned char buf_getbyte(const struct binbuffer *src, size_t offset)
-{
-   if (src->offset + offset < src->size)
-   {
-      return (unsigned char)*(src->buffer + src->offset + offset);
-   }
-   else
-   {
-      return '\0';
-   }
-
-}
-
-
-/*********************************************************************
- * 
- * Function    :  gif_skip_data_block
- *
- * Description :  Safely advances the offset of a given struct binbuffer
- *                that contains a GIF image and whose offset is
- *                positioned at the start of a data block, behind
- *                that block.
- *
- * Parameters  :
- *          1  :  buf = Pointer to the binbuffer
- *
- * Returns     :  0 on success, or 1 on failure
- *
- *********************************************************************/
-static int gif_skip_data_block(struct binbuffer *buf)
-{
-   unsigned char c;
-
-   /* 
-    * Data blocks are sequences of chunks, which are headed
-    * by a one-byte length field, with the last chunk having
-    * zero length.
-    */
-   while((c = buf_getbyte(buf, 0)) != '\0')
-   {
-      buf->offset += (size_t)c + 1;
-      if (buf->offset >= buf->size - 1)
-      {
-         return 1;
-      }
-   }
-   buf->offset++;
-
-   return 0;
-
-}
-
-
-/*********************************************************************
- * 
- * Function    :  gif_extract_image
- *
- * Description :  Safely extracts an image data block from a given
- *                struct binbuffer that contains a GIF image and whose
- *                offset is positioned at the start of a data block 
- *                into a given destination binbuffer.
- *
- * Parameters  :
- *          1  :  src = Pointer to the source binbuffer
- *          2  :  dst = Pointer to the destination binbuffer
- *
- * Returns     :  0 on success, or 1 on failure
- *
- *********************************************************************/
-static int gif_extract_image(struct binbuffer *src, struct binbuffer *dst)
-{
-   unsigned char c;
-
-   /*
-    * Remember the colormap flag and copy the image head
-    */
-   c = buf_getbyte(src, 9);
-   if (buf_copy(src, dst, 10))
-   {
-      return 1;
-   }
-
-   /*
-    * If the image has a local colormap, copy it.
-    */
-   if (c & 0x80)
-   {
-      int map_length = 3 * (1 << ((c & 0x07) + 1));
-      if (map_length <= 0)
-      {
-         log_error(LOG_LEVEL_DEANIMATE,
-            "colormap length = %d (%c)?", map_length, c);
-         return 1;
-      }
-      if (buf_copy(src, dst, (size_t)map_length))
-      {
-         return 1;
-      }           
-   }
-   if (buf_copy(src, dst, 1)) return 1;
-
-   /*
-    * Copy the image chunk by chunk.
-    */
-   while((c = buf_getbyte(src, 0)) != '\0')
-   {
-      if (buf_copy(src, dst, 1 + (size_t) c)) return 1;
-   }
-   if (buf_copy(src, dst, 1)) return 1;
-
-   /*
-    * Trim and rewind the dst buffer
-    */
-   if (NULL == (dst->buffer = (char *)realloc(dst->buffer, dst->offset))) return 1;
-   dst->size = dst->offset;
-   dst->offset = 0;
-
-   return(0);
-
-}
-
-/*********************************************************************
- * 
- * Function    :  gif_deanimate
- *
- * Description :  Deanimate a given GIF image, i.e. given a GIF with
- *                an (optional) image block and an arbitrary number
- *                of image extension blocks, produce an output GIF with
- *                only one image block that contains the last image
- *                (extenstion) block of the original.
- *                Also strip Comments, Application extenstions, etc.
- *
- * Parameters  :
- *          1  :  src = Pointer to the source binbuffer
- *          2  :  dst = Pointer to the destination binbuffer
- *          3  :  get_first_image = Flag: If set, get the first image
- *                                        If unset (default), get the last
- *
- * Returns     :  0 on success, or 1 on failure
- *
- *********************************************************************/
-int gif_deanimate(struct binbuffer *src, struct binbuffer *dst, int get_first_image)
-{
-   unsigned char c;
-   struct binbuffer *image;
-
-   if (NULL == src || NULL == dst)
-   {
-      return 1;
-   }
-
-   c = buf_getbyte(src, 10);
-
-   /*
-    * Check & copy GIF header 
-    */
-   if (strncmp(src->buffer, "GIF89a", 6) && strncmp(src->buffer, "GIF87a", 6)) 
-   {
-      return 1;
-   }
-   else
-   {
-      if (buf_copy(src, dst, 13))
-      {
-         return 1;
-      }
-   }
-
-   /*
-    * Look for global colormap and  copy if found.
-    */
-   if(c & 0x80)
-   {
-      int map_length = 3 * (1 << ((c & 0x07) + 1));
-      if (map_length <= 0)
-      {
-         log_error(LOG_LEVEL_DEANIMATE,
-            "colormap length = %d (%c)?", map_length, c);
-         return 1;
-      }
-      if (buf_copy(src, dst, (size_t)map_length))
-      {
-         return 1;
-      }
-   }
-
-   /*
-    * Reserve a buffer for the current image block
-    */
-   if (NULL == (image = (struct binbuffer *)zalloc(sizeof(*image))))
-   {
-      return 1;
-   }
-
-   /*
-    * Parse the GIF block by block and copy the relevant
-    * parts to dst
-    */
-   while(src->offset < src->size)
-   {
-      switch(buf_getbyte(src, 0))
-      {
-         /*
-          *  End-of-GIF Marker: Append current image and return
-          */
-      case 0x3b:
-         goto write;
-
-         /* 
-          * Image block: Extract to current image buffer.
-          */
-      case 0x2c:
-         image->offset = 0;
-         if (gif_extract_image(src, image)) goto failed;
-         if (get_first_image) goto write;
-         continue;
-
-         /*
-          * Extension block: Look at next byte and decide
-          */
-      case 0x21:
-         switch (buf_getbyte(src, 1))
-         {
-            /*
-             * Image extension: Copy extension  header and image
-             *                  to the current image buffer
-             */
-         case 0xf9:
-            image->offset = 0;
-            if (buf_copy(src, image, 8) || buf_getbyte(src, 0) != 0x2c) goto failed;
-            if (gif_extract_image(src, image)) goto failed;
-            if (get_first_image) goto write;
-            continue;
-
-            /*
-             * Application extension: Skip
-             */
-         case 0xff:
-            if ((src->offset += 14) >= src->size || gif_skip_data_block(src)) goto failed;
-            continue;
-
-            /*
-             * Comment extension: Skip
-             */
-         case 0xfe:
-            if ((src->offset += 2) >= src->size || gif_skip_data_block(src)) goto failed;
-            continue;
-
-            /*
-             * Plain text extension: Skip
-             */
-         case 0x01:
-            if ((src->offset += 15) >= src->size || gif_skip_data_block(src)) goto failed;
-            continue;
-
-            /*
-             * Ooops, what type of extension is that?
-             */
-         default:
-            goto failed;
-
-         }
-
-         /*
-          * Ooops, what type of block is that?
-          */
-      default:
-         goto failed;
-         
-      }
-   } /* -END- while src */
-
-   /*
-    * Either we got here by goto, or because the GIF is
-    * bogus and EOF was reached before an end-of-gif marker 
-    * was found.
-    */
-
-failed:
-   buf_free(image);
-   return 1;
-
-   /*
-    * Append the current image to dst and return
-    */
-
-write:
-   if (buf_copy(image, dst, image->size)) goto failed;
-   if (buf_extend(dst, 1)) goto failed;
-   *(dst->buffer + dst->offset++) = 0x3b;
-   buf_free(image);
-   return 0;
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/deanimate.h b/external/privoxy/deanimate.h
deleted file mode 100644
index 53af6f1..0000000
--- a/external/privoxy/deanimate.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef DEANIMATE_H_INCLUDED
-#define DEANIMATE_H_INCLUDED
-#define DEANIMATE_H_VERSION "$Id: deanimate.h,v 1.12 2008/03/28 15:13:39 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/deanimate.h,v $
- *
- * Purpose     :  Declares functions to manipulate binary images on the
- *                fly.  High-level functions include:
- *                  - Deanimation of GIF images
- *                
- *                Functions declared include: gif_deanimate and buf_free.
- *                
- *
- * Copyright   :  Written by and Copyright (C) 2001 - 2004 by the the
- *                SourceForge Privoxy team. http://www.privoxy.org/
- *
- *                Based on ideas from the Image::DeAnim Perl module by
- *                Ken MacFarlane, <ksm+cpan@xxxxxxxxxxxxxxxxx>
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: deanimate.h,v $
- *    Revision 1.12  2008/03/28 15:13:39  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.11  2007/01/12 15:41:00  fabiankeil
- *    Remove some white space at EOL.
- *
- *    Revision 1.10  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.8.2.1  2004/10/03 12:53:32  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.8  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.7  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.6  2002/03/08 17:46:04  jongfoster
- *    Fixing int/size_t warnings
- *
- *    Revision 1.5  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.4  2001/07/29 18:50:04  jongfoster
- *    Fixing "extern C" block, and renaming #define _DEANIMATE_H
- *
- *    Revision 1.3  2001/07/18 12:29:05  oes
- *    Updated prototype for gif_deanimate
- *
- *    Revision 1.2  2001/07/13 13:46:20  oes
- *    Introduced GIF deanimation feature
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * A struct that holds a buffer, a read/write offset,
- * and the buffer's capacity.
- */
-struct binbuffer
-{
-   char *buffer;
-   size_t offset;
-   size_t size;
-};
-
-/*
- * Function prototypes
- */
-extern int gif_deanimate(struct binbuffer *src, struct binbuffer *dst, int get_first_image);
-extern void buf_free(struct binbuffer *buf);
-
-/* 
- * Revision control strings from this header and associated .c file
- */
-extern const char deanimate_rcs[];
-extern const char deanimate_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef DEANIMATE_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/default.action.master b/external/privoxy/default.action.master
deleted file mode 100644
index 81c4138..0000000
--- a/external/privoxy/default.action.master
+++ /dev/null
@@ -1,2162 +0,0 @@
-#MASTER# COMMENT:
-#MASTER# COMMENT:  Anyone adding specific rules to this file,
-#MASTER# COMMENT:  wherever possible please include a *full* URL
-#MASTER# COMMENT:  which can be used to verify the problem, and if
-#MASTER# COMMENT:  the problem may not always be fully obvious, a
-#MASTER# COMMENT:  brief explanation. Please also add tests for
-#MASTER# COMMENT:  Privoxy-Regression-Test so we can automatically
-#MASTER# COMMENT:  verify that your rules are effective. Thanks.
-#MASTER# COMMENT:
-######################################################################
-#
-#  File        :  $Source: /cvsroot/ijbswa/current/default.action.master,v $
-#
-#  $Id: default.action.master,v 1.170 2009/03/04 15:05:00 ler762 Exp $
-#
-#  Requires    :  This version requires Privoxy v3.0.11 or later due to
-#                 syntax changes.
-#
-#  Purpose     :  Default actions file, see
-#                 http://www.privoxy.org/user-manual/actions-file.html.
-#                 This file is subject to periodic updating. It is
-#                 not supposed to be edited by the user. Local exceptions
-#                 and enhancements are better placed in user.action,
-#                 the match-all section has been moved to match-all.action.
-#
-#  Copyright   :  Written by and Copyright (C) 2001-2009 the
-#                 Privoxy team. http://www.privoxy.org/
-#
-#  Note: Updated versions of this file will be made available from time
-#        to time. Check http://sourceforge.net/project/showfiles.php?group_id=11118
-#        for updates and/or subscribe to the announce mailing list
-#        (http://lists.sourceforge.net/lists/listinfo/ijbswa-announce) if you
-#        wish to receive an email notice whenever updates are released.
-#
-# We value your feedback. However, to provide you with the best support,
-# please note:
-#
-#  * Use the support forum to get help:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=211118
-#  * Submit feedback for this actions file only through the
-#    SF actions file feedback tracker:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=460288
-#  * Submit bugs only through our bug forum:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=111118
-#    Make sure that the bug has not already been submitted. Please try
-#    to verify that it is a Privoxy bug, and not a browser or site
-#    bug first. If you are using your own custom configuration, please
-#    try the stock configs to see if the problem is a configuration
-#    related bug. And if possible please try the latest CVS sources.
-#  * Submit feature requests only through our feature request forum:
-#    http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse
-#
-# For any other issues, feel free to use the mailing lists:
-# http://sourceforge.net/mail/?group_id=11118
-#
-# Anyone interested in actively participating in development and related
-# discussions can join the appropriate mailing list here:
-# http://sourceforge.net/mail/?group_id=11118. Archives are available
-# here too.
-#
-# The current development version of this file is located:
-# http://ijbswa.cvs.sourceforge.net/*checkout*/ijbswa/current/default.action.master
-#
-#############################################################################
-# Syntax
-#############################################################################
-#
-# A much better explanation can be found in the user manual which is
-# part of the distribution and can be found at http://www.privoxy.org/user-manual
-#
-# To determine which actions apply to a request, the URL of the request is
-# compared to all patterns in this file. Every time it matches, the list of
-# applicable actions for this URL is incrementally updated. You can trace
-# this process by visiting http://config.privoxy.org/show-url-info
-#
-# There are 4 types of lines in this file: comments (like this line),
-# actions, aliases and patterns, all of which are explained below.
-#
-#############################################################################
-# Pattern Syntax
-#############################################################################
-#
-# 1. On Domains and Paths
-# -----------------------
-#
-# Generally, a pattern has the form <domain>/<path>, where both the <domain>
-# and <path> part are optional. The pattern matching syntax is different for
-# each. If you only specify a domain part, the "/" can be left out, but it is
-# required for the path part.
-#
-# www.example.com
-#   is a domain-only pattern and will match any request to www.example.com
-#
-# www.example.com/
-#   means exactly the same (but is slightly less efficient)
-#
-# www.example.com/index.html
-#   matches only the document /index.html on www.example.com
-#
-# /index.html
-#   matches the document /index.html, regardless of the domain
-#
-# index.html
-#   matches nothing, since it would be interpreted as a domain name and
-#   there is no top-level domain called ".html".
-#
-# 2. Domain Syntax
-# ----------------
-#
-# The matching of the domain part offers some flexible options: If the
-# domain starts or ends with a dot, it becomes unanchored at that end:
-#
-# www.example.com
-#   matches only www.example.com
-#
-# .example.com
-#   matches any domain that ENDS in .example.com
-#
-# www.
-#   matches any domain that STARTS with www.
-#
-# .example.
-#   matches any domain that CONTAINS example
-#
-#
-# Additionally, there are wildcards that you can use in the domain names
-# themselves. They work pretty similar to shell wildcards: "*" stands for
-# zero or more arbitrary characters, "?" stands for one, and you can define
-# character classes in square brackets and they can be freely mixed:
-#
-# ad*.example.com
-#   matches adserver.example.com, ads.example.com, etc but not sfads.example.com
-#
-# *ad*.example.com
-#   matches all of the above
-#
-# .?pix.com
-#   matches www.ipix.com, pictures.epix.com, a.b.c.d.e.upix.com etc
-#
-# www[1-9a-ez].example.com
-#   matches www1.example.com, www4.example.com, wwwd.example.com,
-#   wwwz.example.com etc, but not wwww.example.com
-#
-# You get the idea?
-#
-# 2. Path Syntax
-# --------------
-#
-# Paths are specified as full regular expressions, and are more flexible than
-# the domain syntax above. A comprehensive discussion of regular expressions
-# wouldn't fit here.
-#
-# Perl compatible regular expressions are used. See the pcre/docs/ direcory or
-# man perlre (also available at http://perldoc.perl.org/perlre.html) for
-# details. The appendix to our User Manual also has some detail.
-#
-# Please note that matching in the path is CASE INSENSITIVE by default, but
-# you can switch to case sensitive by starting the pattern with the "(?-i)"
-# switch:
-#
-# www.example.com/(?-i)PaTtErN.*
-#   will match only documents whose path starts with PaTtErN in exactly this
-#   capitalization.
-#
-# Partially case-sensitive and partially case-insensitive patterns are
-# possible, but the rules about splitting them up are extremely complex
-# - see the PCRE documentation for more information.
-#
-#############################################################################
-# Action Syntax
-#############################################################################
-#
-# There are 3 kinds of actions:
-#
-# Boolean (e.g. "handle-as-image"):
-#   +name  # enable
-#   -name  # disable
-#
-# Parameterized (e.g. "hide-user-agent"):
-#   +name{param}  # enable and set parameter to "param"
-#   -name         # disable
-#
-# Multi-value (e.g. "add-header", "filter"):
-#   +name{param}  # enable and add parameter "param"
-#   -name{param}  # remove the parameter "param"
-#   -name         # disable totally
-#
-# The default (if you don't specify anything in this file) is not to take
-# any actions - i.e completely disabled, so Privoxy will just be a
-# normal, non-blocking, non-anonymizing proxy.  You must specifically
-# enable the privacy and blocking features you need (although the
-# provided default actions file will do that for you).
-#
-# Later actions always override earlier ones.  For multi-valued actions,
-# the actions are applied in the order they are specified.
-#
-#############################################################################
-# Valid actions are:
-#############################################################################
-#
-# +add-header{Name: value}
-#    Adds the specified HTTP header, which is not checked for validity.
-#    You may specify this many times to specify many headers.
-#
-# +block{reason}
-#    Block this URL. Instead of forwarding the request, Privoxy will
-#    send a "block" page containing the specified reason.
-#
-# +change-x-forwarded-for{add}
-# +change-x-forwarded-for{block}
-#   Adds or blocks the "X-Forwarded-For:" HTTP header in client
-#   requests.
-#
-# +client-header-filter{name}
-#    All client headers to which this action applies are filtered on-the-fly
-#    through the specified regular expression based substitutions.
-#
-#    Client-header filters predefined in the supplied default.filter include:
-#
-#     hide-tor-exit-notation: Removes the Tor exit node notation in Host and Referer headers.
-#     privoxy-control:        Removes X-Privoxy-Control headers.
-#
-# +client-header-tagger{string}
-#    Tag requests based on their headers. Client headers to which this
-#    action applies are filtered on-the-fly through the specified regular
-#    expression based substitutions, the result is used as a tag.
-#    Client-header taggers are the first actions that are executed and their
-#    tags can be used to control every other action.
-#
-#    Client-header taggers predefined in the supplied default.filter include:
-#
-#     image-requests:    Tags detected image requests as "IMAGE-REQUEST".
-#     css-requests:      Tags detected CSS requests as "CSS-REQUEST".
-#     client-ip-address: Tags the request with the client's IP address.
-#     http-method:       Tags the request with its HTTP method.
-#     allow-post:        Tags POST requests as "ALLOWED-POST".
-#     complete-url:      Tags the request with the whole request URL.
-#     user-agent:        Tags the request with the complete User-Agent header.
-#     privoxy-control:   Creates tags with the content of X-Privoxy-Control headers.
-#
-# +content-type-overwrite
-#    Replaces the "Content-Type:" HTTP server header, so that unwanted
-#    download menus will not pop up, or changes the browser's rendering mode.
-#
-# +crunch-client-header{string}
-#    Deletes every header sent by the client that contains the string the
-#    user supplied as parameter.
-#
-# +crunch-if-none-match
-#     Deletes the "If-None-Match:" HTTP client header.
-#
-# +crunch-server-header{string}
-#    Deletes every header sent by the server that contains the string the
-#    user supplied as a parameter.
-#
-# +deanimate-gifs{last}
-# +deanimate-gifs{first}
-#    Deanimate all animated GIF images, i.e. reduce them to their last
-#    frame. This will also shrink the images considerably. (In bytes,
-#    not pixels!)
-#    If the option "first" is given, the first frame of the animation
-#    is used as the replacement. If "last" is given, the last frame of
-#    the animation is used instead, which propably makes more sense for
-#    most banner animations, but also has the risk of not showing the
-#    entire last frame (if it is only a delta to an earlier frame).
-#
-# +downgrade-http-version
-#    Downgrade HTTP/1.1 client requests to HTTP/1.0 and downgrade the
-#    responses as well. Use this action for servers that use HTTP/1.1
-#    protocol features that Privoxy currently can't handle yet.
-#
-# +fast-redirects{check-decoded-url}
-# +fast-redirects{simple-check}
-#    Many sites, like yahoo.com, don't just link to other sites.
-#    Instead, they will link to some script on their own server,
-#    giving the destination as a parameter, which will then redirect
-#    you to the final target.
-#
-#    URLs resulting from this scheme typically look like:
-#    http://some.place/some_script?http://some.where-else
-#
-#    Sometimes, there are even multiple consecutive redirects encoded
-#    in the URL. These redirections via scripts make your web browsing
-#    more traceable, since the server from which you follow such a link
-#    can see where you go to. Apart from that, valuable bandwidth and
-#    time is wasted, while your browser asks the server for one redirect
-#    after the other. Plus, it feeds the advertisers.
-#
-#    The +fast-redirects{check-decoded-url} option enables interception of
-#    these requests by Privoxy, who will cut off all but the last valid URL
-#    in the request and send a local redirect back to your browser without
-#    contacting the intermediate sites. NOTE: Syntax change as of v.3.0.4.
-#
-# +filter{name}
-#    All files of text-based type, most notably HTML and JavaScript, to which
-#    this action applies, can be filtered on-the-fly through the specified
-#    regular expression based substitutions. (Note: plain text documents are
-#    exempted from filtering, because web servers often use the text/plain
-#    MIME type for all files whose type they don't know.) By default,
-#    filtering works only on the raw document content itself (that which can
-#    be seen with View Source), not the headers. Repeat for multiple filters.
-#    Use with caution: filters can be very intrusive.
-#
-#    Filters predefined in the supplied default.filter include:
-#
-#     js-annoyances:       Get rid of particularly annoying JavaScript abuse.
-#     js-events:           Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).
-#     html-annoyances:     Get rid of particularly annoying HTML abuse.
-#     content-cookies:     Kill cookies that come in the HTML or JS content.
-#     refresh-tags:        Kill automatic refresh tags (for dial-on-demand setups).
-#     unsolicited-popups:  Disable only unsolicited pop-up windows.
-#     all-popups:          Kill all popups in JavaScript and HTML.
-#     img-reorder:         Reorder attributes in <img> tags to make the banners-by-* filters more effective.
-#     banners-by-size:     Kill banners by size.
-#     banners-by-link:     Kill banners by their links to known clicktrackers.
-#     webbugs:             Squish WebBugs (1x1 invisible GIFs used for user tracking).
-#     tiny-textforms:      Extend those tiny textareas up to 40x80 and kill the hard wrap.
-#     jumping-windows:     Prevent windows from resizing and moving themselves.
-#     frameset-borders:    Give frames a border and make them resizable.
-#     demoronizer:         Fix MS's non-standard use of standard charsets.
-#     shockwave-flash:     Kill embedded Shockwave Flash objects.
-#     quicktime-kioskmode: Make Quicktime movies saveable.
-#     fun:                 Text replacements for subversive browsing fun!
-#     crude-parental:      Crude parental filtering. Note that this filter doesn't work reliably.
-#     ie-exploits:         Disable some known Internet Explorer bug exploits.
-#     site-specifics:      Cure for site-specific problems. Don't apply generally!
-#     no-ping:             Removes non-standard ping attributes in <a> and <area> tags.
-#     google:              CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.
-#     yahoo:               CSS-based block for Yahoo text ads. Also removes a width limitation.
-#     msn:                 CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.
-#     blogspot:            Cleans up some Blogspot blogs. Read the fine print before using this.
-#
-# +force-text-mode
-#    Declares a document as plain text, even if the "Content-Type:" isn't detected
-#    as such.
-#
-# +forward-override{forward .}
-# +forward-override{forward 127.0.0.1:8123}
-# +forward-override{forward-socks4a 127.0.0.1:9050 .}
-# +forward-override{forward-socks4a 127.0.0.1:9050 proxy.example.org:8000}
-# +forward-override{forward-socks5 127.0.0.1:9050 .}
-# +forward-override{forward-socks5 127.0.0.1:9050 proxy.example.org:8000}
-#   This action overrules the forward directives in the configuration file.
-#
-# +handle-as-empty-document
-#   This action alone doesn't do anything noticeable. It just marks URLs. If
-#   the block action also applies, the presence or absence of this mark
-#   decides whether an HTML "blocked"  page, or an empty document will be sent
-#   to the client as a substitute for the blocked content.
-#
-# +handle-as-image
-#    Treat this URL as an image.  This only matters if it's also "+block"ed,
-#    in which case a "blocked" image can be sent rather than a HTML page.
-#    See +set-image-blocker{} for the control over what is actually sent.
-#
-# +hide-accept-language{lang}
-# +hide-accept-language{block}
-#   Deletes or replaces the "Accept-Language:" HTTP header in client
-#   requests.
-#
-# +hide-content-disposition{block}
-# +hide-content-disposition{string}
-#   Deletes or replaces the "Content-Disposition:" HTTP header set by some
-#   servers. This can be used to prevent download menus for content you
-#   prefer to view inside the browser, for example.
-#
-# +hide-from-header{block}
-# +hide-from-header{spam@xxxxxxxxxxxxxxx}
-#   If the browser sends a "From:" header containing your e-mail address,
-#   either completely removes the header ("block"), or change it to the
-#   specified e-mail address.
-#
-# +hide-if-modified-since{block}
-# +hide-if-modified-since{-60}
-#   Deletes the "If-Modified-Since:" HTTP client header or modifies its
-#   value, preventing another way to track users.
-#
-# +hide-referer{block}
-# +hide-referer{forge}
-# +hide-referer{http://nowhere.com}
-#    Don't send the "Referer:" (sic) header to the web site.  You can
-#    block it, forge a URL to the same server as the request (which is
-#    preferred because some sites will not send images otherwise) or
-#    set it to a constant string.
-#
-# +hide-referrer{...}
-#    Alternative spelling of +hide-referer.  Has the same parameters,
-#    and can be freely mixed with, "+hide-referer".  ("referrer" is the
-#    correct English spelling, however the HTTP specification has a
-#    bug - it requires it to be spelt "referer").
-#
-# +hide-user-agent{browser-type}
-#    Change the "User-Agent:" header so web servers can't tell your
-#    browser type.  (Breaks many web sites).  Specify the user-agent
-#    value you want - e.g., to pretend to be using Netscape on Linux:
-#      +hide-user-agent{Mozilla (X11; I; Linux 2.0.32 i586)}
-#    Or to identify yourself explicitly as a Privoxy user:
-#      +hide-user-agent{Privoxy/1.0}
-#    (Don't change the version number from 1.0 - after all, why tell them?)
-#
-# +limit-connect{portlist}
-#
-#    By default, i.e. if no limit-connect action applies, Privoxy
-#    allows HTTP CONNECT requests to all ports. Use limit-connect
-#    if fine-grained control is desired for some or all destinations.
-#    The CONNECT methods exists in HTTP to allow access to secure websites
-#    ("https://"; URLs) through proxies. It works very simply: the proxy
-#    connects to the server on the specified port, and then short-circuits
-#    its connections to the client and to the remote server. This means
-#    CONNECT-enabled proxies can be used as TCP relays very easily. Privoxy
-#    relays HTTPS traffic without seeing the decoded content. Websites can
-#    leverage this limitation to circumvent Privoxy's filters. By specifying
-#    an invalid port range you can disable HTTPS entirely.
-#
-#    +limit-connect{443}                   # Only port 443 is OK.
-#    +limit-connect{80,443}                # Ports 80 and 443 are OK.
-#    +limit-connect{-3, 7, 20-100, 500-}   # Ports less than 3, 7, 20 to 100 and above 500 are OK.
-#    +limit-connect{-}                     # All ports are OK
-#    +limit-connect{,}                     # No HTTPS/SSL traffic is allowed
-#
-# +overwrite-last-modified{block}
-# +overwrite-last-modified{reset-to-request-time}
-# +overwrite-last-modified{randomize}
-#    Removing the "Last-Modified:" header is useful for filter testing, where
-#    you want to force a real reload instead of getting status code "304",
-#    which would cause the browser to reuse the old version of the page.
-#
-#    The "randomize" option overwrites the value of the "Last-Modified:"
-#    header with a randomly chosen time between the original value and the
-#    current time. In theory the server could send each document with a
-#    different "Last-Modified:" header to track visits without using cookies.
-#    "Randomize" makes it impossible and the browser can still revalidate
-#    cached documents.
-#
-#    "reset-to-request-time" overwrites the value of the "Last-Modified:"
-#    header with the current time. You could use this option together with
-#    hide-if-modified-since to further customize your random range.
-#
-# +prevent-compression
-#    Prevent the website from compressing the data. Some websites do
-#    that, which is a problem for Privoxy when built without zlib support,
-#    since +filter and +gif-deanimate will not work on compressed data.
-#    Will slow down connections to those websites, though.
-#
-# +server-header-filter{name}
-#    All server headers to which this action applies are filtered on-the-fly
-#    through the specified regular expression based substitutions.
-#
-#    Server-header filters predefined in the supplied default.filter include:
-#
-#     x-httpd-php-to-html:   Changes the Content-Type header from x-httpd-php to html.
-#     html-to-xml:           Changes the Content-Type header from html to xml.
-#     xml-to-html:           Changes the Content-Type header from xml to html.
-#     less-download-windows: Prevent annoying download windows for content types the browser can handle itself.
-#     privoxy-control:       Removes X-Privoxy-Control headers.
-#
-# +server-header-tagger{content-type}
-#    Server headers to which this action applies are filtered on-the-fly
-#    through the specified regular expression based substitutions, the result
-#    is used as a tag. Server-header taggers are executed before all other
-#    header actions that modify server headers. Their tags can be used to
-#    control all of the other server-header actions, the content filters and
-#    the crunch actions (redirect and block).
-#
-#    Server-header taggers predefined in the supplied default.filter include:
-#
-#     content-type:    Tags the request with the content type declared by the server.
-#     privoxy-control: Creates tags with the content of X-Privoxy-Control headers.
-#
-# +session-cookies-only
-#    If the website sets cookies, make sure they are erased when you exit
-#    and restart your web browser.  This makes profiling cookies useless,
-#    but won't break sites which require cookies so that you can log in
-#    or for transactions.
-#
-# +set-image-blocker{blank}
-# +set-image-blocker{pattern}
-# +set-image-blocker{<URL>} with <url> being any valid image URL
-#    Decides what to do with URLs that end up tagged with {+block +handle-as-image}.
-#    There are 4 options:
-#      * "-set-image-blocker" will send a HTML "blocked" page, usually
-#         resulting in a "broken image" icon.
-#      * "+set-image-blocker{blank}" will send a 1x1 transparent image
-#      * "+set-image-blocker{pattern}" will send a 4x4 grey/white pattern
-#        which is less intrusive than the logo but easier to recognize
-#        than the transparent one.
-#      * "+set-image-blocker{<URL>}" will send a HTTP temporary redirect
-#        to the specified image URL.
-#
-#
-# +crunch-outgoing-cookies
-#    Prevent the website from reading cookies
-#
-# +crunch-incoming-cookies
-#    Prevent the website from setting cookies
-#
-# +redirect{<URL>}
-# +redirect{<pcrs command>}
-#    Convinces the browser that the requested document has been moved to
-#    another location and the browser should get it from the specified
-#    URL.
-#
-#############################################################################
-
-#############################################################################
-# Settings -- Don't change.
-#############################################################################
-{{settings}}
-#############################################################################
-#MASTER# COMMENT: The minimum Privoxy version:
-for-privoxy-version=3.0.11
-
-#############################################################################
-# Aliases
-#############################################################################
-{{alias}}
-#############################################################################
-#
-# You can define a short form for a list of permissions - e.g., instead
-# of "-crunch-incoming-cookies -crunch-outgoing-cookies -filter -fast-redirects",
-# you can just write "shop". This is called an alias.
-#
-# Currently, an alias can contain any character except space, tab, '=', '{'
-# or '}'.
-# But please use only 'a'-'z', '0'-'9', '+', and '-'.
-#
-# Alias names are not case sensitive.
-#
-# Aliases beginning with '+' or '-' may be used for system action names
-# in future releases - so try to avoid alias names like this.  (e.g.
-# "+crunch-all-cookies" below is not a good name)
-#
-# Aliases must be defined before they are used.
-#
-
-# These aliases just save typing later:
-#
-+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
--crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
- allow-all-cookies  = -crunch-all-cookies -session-cookies-only
- allow-popups       = -filter{all-popups} -filter{unsolicited-popups}
-+block-as-image     = +block{Blocked image request.} +handle-as-image
--block-as-image     = -block
-
-# These aliases define combinations of actions
-# that are useful for certain types of sites:
-#
-fragile     = -block -crunch-all-cookies -filter -fast-redirects -hide-referer -prevent-compression
-shop        = -crunch-all-cookies allow-popups
-
-# Your favourite blend of filters:
-#
-myfilters   = +filter{html-annoyances} +filter{js-annoyances} +filter{all-popups}\
-              +filter{webbugs} +filter{banners-by-size}
-
-# Allow ads for selected useful free sites:
-#
-allow-ads   = -block -filter{banners-by-size} -filter{banners-by-link}
-
-################
-#
-# Cautious settings -- safe for all sites, but offer little privacy protection
-#
-{ \
-+change-x-forwarded-for{block} \
-+hide-from-header{block} \
-+set-image-blocker{pattern} \
-}
-standard.Cautious
-
-################
-#
-# Medium settings -- safe for most sites, with reasonable protection/damage tradeoff
-#
-{ \
-+change-x-forwarded-for{block} \
-+deanimate-gifs{last} \
-+filter{refresh-tags} \
-+filter{img-reorder} \
-+filter{banners-by-size} \
-+filter{webbugs} \
-+filter{jumping-windows} \
-+filter{ie-exploits} \
-+hide-from-header{block} \
-+hide-referrer{conditional-block} \
-+session-cookies-only \
-+set-image-blocker{pattern} \
-}
-standard.Medium
-
-################
-#
-# Advanced settings -- reasonable privacy protection but
-# require some exceptions for trusted sites, most likely
-# because of cookies or SSL. Also testing ground for
-# new options.
-#
-# CAUTION: These settings can still be subverted by a
-# misconfigured client that executes code from untrusted
-# sources.
-#
-{ \
-+change-x-forwarded-for{block} \
-+client-header-tagger{css-requests} \
-+client-header-tagger{image-requests} \
-+crunch-if-none-match \
-+crunch-outgoing-cookies \
-+crunch-incoming-cookies \
-+deanimate-gifs{last} \
-+fast-redirects{check-decoded-url} \
-+filter{html-annoyances} \
-+filter{content-cookies} \
-+filter{refresh-tags} \
-+filter{img-reorder} \
-+filter{banners-by-size} \
-+filter{banners-by-link} \
-+filter{webbugs} \
-+filter{jumping-windows} \
-+filter{frameset-borders} \
-+filter{quicktime-kioskmode} \
-+hide-if-modified-since{-60} \
-+hide-from-header{block} \
-+hide-referrer{conditional-block} \
-+limit-connect{,} \
-+overwrite-last-modified{randomize} \
-+set-image-blocker{pattern} \
-}
-standard.Advanced
-
-#############################################################################
-# These extensions belong to images:
-#############################################################################
-{+handle-as-image -filter}
-#############################################################################
-/.*\.(gif|jpe?g|png|bmp|ico)($|\?)
-
-#############################################################################
-# These don't:
-#############################################################################
-{-handle-as-image}
-/.*\.(js|php|css|.?html?)
-
-#############################################################################
-# Generic block patterns by host:
-#############################################################################
-{+block{Host matches generic block pattern.}}
-ad*.
-.*ads.
-#MASTER# REMARKS: removed .ad. 2007-12-18 HB
-#MASTER# REMARKS: Modifications per Actionsfile feedback item #1807613
-.ad.?.
-.ad.[a-ik-z][a-oq-z].
-.ad.jp.*.
-.ad.???*.
-# Blocked URL = http://alternativos.iw-advertising.com/
-.*advert*.
-*banner*.
-count*.
-*counter.
-#MASTER# PROBLEM URL: http://www.newegg.com
-promotions.
-#MASTER# BLOCK-REFERRER: http://tech.cybernetnews.com/
-# Blocked URL = http://metrics.performancing.com/
-metrics.
-
-#############################################################################
-# Generic unblockers by host:
-#############################################################################
-{-block}
-adsl.
-ad[udmw]*.
-adbl*.
-adam*.
-adapt*.
-adob*.
-adrenaline.
-adtp*.
-adv[oia]*.
-adventure*.
-.*road*.
-.olympiad*.
-.*load*.
-.*[epu]ad*.
-county*.
-countr*.
-
-#############################################################################
-# Generic block patterns by path:
-#############################################################################
-{+block{Path matches generic block pattern.}}
-/(.*/)?ad(\?|/|s|v|_?(image|se?rv|box)|cycle|rotate|mentor|click|f[ra]m|script|stream|fetch|log|space)
-# Blocked URL = http://www.example.org/adimage
-# Blocked URL = http://www.example.org/adspace
-/phpads(new)?/
-/(.*/)?(ad|all|nn|db|promo(tion)?)?[-_]?banner
-/(.*/)?(publicite|werbung|rekla(me|am)|annonse|maino(kset|nta|s)?/)
-/.*(count|track|compteur|(?<!relo)adframe|adse?rve?|banner)(er|run)?(\?|\.(pl|cgi|exe|dll|asp|php|cpt))
-/(.*/)?clicktrack
-/(.*/)?(full)?pop[-_]?(up|over|under|open(er)?)?s?(/|\.)
-/(.*/)?((flash)?pop|live(cnt|count(er)?)).*\.(js|php|cgi)
-
-#############################################################################
-# Generic unblockers by path:
-#############################################################################
-{-block}
-# Sticky Actions = -block
-/.*ad(sl|v(i[cs]|o|an|ertencia|ent|.*search|erse)) # advice/advisories/advan*/advertencia (spanish) adverse
-/.*(lo|thre|he|d|gr|l|ro|re|squ|class(ified)?)ads
-/.*account
-support./(.*/)?track
-
-#############################################################################
-# Exceptions for academia and non-profits
-#############################################################################
-.edu
-.ac.*/
-.uni-*.de
-.tu-*.de
-.gov
-.hs-*.de
-.fh-*.de
-#MASTER# REMARKS: Try to avoid harmless names in non-commercial organizations. Added 10/24/06
-# URL = http://www.gnu.org/graphics/gnu-head-banner.png
-.org/.*(image|banner)
-
-#############################################################################
-# Catch-all for false-positives that are just TOO obvious to let go
-#############################################################################
-{+block{Catch-all block for false-positives.}}
-#MASTER# REMARKS: Going for adsrv, adserve, adserver*.
-.ads[erv][rv]*.
-# Blocked URL = http://ads.facebook.com/ads/spreadshirt/banner120x600.jpg
-.ads.
-/(.*/)?ad(se?rv|click|stream|image|log|farm|script)
-# Blocked URL = http://www.torrentportal.com/topad.html
-#MASTER# REMARKS: Action tracker 1637648 and a bit of imagination. Added 2007-01-20.
-#MASTER# REMARKS: Added "text" 20070730 as per http://www.pcworld.com/textad?Keywords=System Resources Tune-Up.&type=pcworld_downloads_search&count=3&ord=906010128&serveUrl=http%3A%2F%2Fwww.pcworld.com%2Fdownloads%2Ffile%2Ffid%2C7661-order%2C1-page%2C1-c%2Csystemresourcestuneup%2Fdescription.html Adam Piggott
-/.*(top|bottom|left|right|text)_?ad
-
-#############################################################################
-# Site-specific block patterns;
-#############################################################################
-{+block{Domain parking site}}
-#MASTER# BLOCK-REFERRER: http://www.inetcat.org
-# Blocked URL = http://www.sedoparking.com/www.inetcat.org
-.sedoparking.com/
-# Blocked URL = http://landing.trafficz.com/index.php?domain=www.inetcat.org
-landing.trafficz.com/
-# Blocked URL = http://www.searchnut.com/?domain=www.inetcat.org
-.searchnut.com/\?domain
-
-{+block{Site-specific block pattern matches.}}
-#MASTER# BLOCK-REFERRER: http://www.brooksbrothers.com/ 10/18/06
-#MASTER# BLOCK-REFERRER: http://www.autodesk.com/
-# Blocked URL = http://www.hitbox.com/foobar
-.hitbox.com
-#MASTER# BLOCK-REFERRER: http://www.the-gadgeteer.com/palmos.html 10/18/06
-# Blocked URL = http://www..the-gadgeteer.com/cgi-bin/getimage.cgi/
-.the-gadgeteer.com/cgi-bin/getimage.cgi/
-#MASTER# BLOCK-REFERRER: http://dest.travelocity.com/DestGuides/geo_frontdoor/0,,TRAVELOCITY,00.html?HPTRACK=icon_dest
-# Blocked URL = http://dest.travelocity.com/website/destinations/images/partner_frommers.gif
-# Blocked URL = http://dest.travelocity.com/website/destinations/images/travelex_logo.gif
-dest.travelocity.com/website/destinations/images/partner_frommers.gif
-dest.travelocity.com/website/destinations/images/travelex_logo.gif
-#MASTER# BLOCK-REFERRER: http://us.imdb.com/Title?0110912 10/18/06
-#MASTER# BLOCK-REFERRER: http://www.imdb.com/help/boards/markup
-#MASTER# REMARKS: 2nd is for emoticons exception
-i.imdb.com/Photos/CMSIcons/(?!buttons|emoticons)
-rcm.amazon.com
-#MASTER# BLOCK-REFERRER: http://www.nytimes.com/ 10/18/06
-# Blocked URL = http://www.nytimes.com/adx/foo
-.nytimes.com/adx/
-#MASTER# BLOCK-REFERRER: http://www.sharereactor.com/ 10/19/06
-#MASTER# BLOCK-REFERRER: http://www.popupad.net/
-#www.popupad.net/ats/
-.adtrak.net
-.elitemediagroup.net
-.popuptraffic.com
-#MASTER# BLOCK-REFERRER: http://www.famousbabes.com/gabrielleR/grpics1.htm 10/19/06
-#MASTER# BLOCK-REFERRER: http://www.hit-now.com/
-.hit-now.com
-#MASTER# BLOCK-REFERRER: http://www.pgpi.org/ 10/18/06
-[a-v]*.valueclick.com
-#MASTER# BLOCK-REFERRER: http://astalavista.box.sk/
-#MASTER# REMARKS: Yea, all these at one site! 10/19/06
-.cpays.com
-.oxado.com
-.adult*finder.com
-#MASTER# DONT-VERIFY: Opera's list of banners to load (XML)
-/scripts/cms/xcms.asp
-#MASTER# REMARKS: Actionsfile tracker 1559740 09/16/06 See http://www.vibrantmedia.com/whatisIntelliTXT.asp
-#MASTER# BLOCK-REFERRER: http://www.hartware.de/news_40795.html
-/.*intellitxt/
-.intellitxt.com
-#MASTER# REMARKS: per Actions File tracker: #1597893 11/17/06, similar to intellitxt
-.kontera.com
-#MASTER# REMARKS: 2007-08-17 HB, similar to intellitxt
-#MASTER# BLOCK-REFERRER: http://www.webhostingtalk.com/archive/index.php/t-533369.html
-.tribalfusion.com/ctxt
-#MASTER# REMARKS: Video advertizer, owned by doubleclick.net.
-#MASTER# BLOCK-REFERRER: http://www.ign.com/ 09/17/06
-.klipmart.com
-#MASTER# BLOCK-REFERRER: http://gamespot.com 09/26/06
-#MASTER# REMARKS: adlog.com.com and ads.com.com
-ad*.com.com
-#MASTER# REMARKS: used in redirects: dw.com.com 12/18/06
-#MASTER# BLOCK-REFERRER: http://verizon.net 09/29/06
-sales.liveperson.net
-#MASTER# BLOCK-REFERRER: www.avclub.com/ 10/14/06
-.iad.liveperson.net
-#MASTER# BLOCK-REFERRER: http://homedepot.com 09/29/06
-#MASTER# BLOCK-REFERRER: http://weather.com 11/03/06
-.coremetrics.com/
-#MASTER# BLOCK-REFERRER: http://wired.com 09/29/06
-.realmedia.com/data/
-#MASTER# REMARKS: webbugs, ads and user tracking js in many places.
-#MASTER# BLOCK-REFERRER: http://washingtonpost.com & http://tomshardware.com 09/29/06
-.revsci.net
-#MASTER# BLOCK-REFERRER: http://www.time.com/time/business/article/0,8599,1073341,00.html 09/29/06
-.clickability.com
-/.*clickability(.com)?/
-#MASTER# BLOCK-REFERRER: http://washingtonpost.com 09/29/06
-stats.*.ihost.com
-#MASTER# BLOCK-REFERRER: http://msnbc.com and many others 09/29/06
-.2o7.net
-#MASTER# BLOCK-REFERRER: http://microsoft.com 09/29/06
-.webtrends.com
-#MASTER# BLOCK-REFERRER: http://tomshardware.com 09/29/06
-.tacoda.
-#MASTER# BLOCK-REFERRER: http://www.torrentazos.com 10/04/06
-ad.theadhost.com
-#MASTER# BLOCK-REFERRER: http://www.stuff.co.nz 10/06/06
-.adbureau.net
-#MASTER# BLOCK-REFERRER: http://drudgereport.com 10/06/06
-.adgardener.com
-#MASTER# BLOCK-REFERRER: http://www.connected-media.com/riven/hints.htm 10/14/06
-#MASTER# REMARKS: ads.kw.revenue.net/? etc
-.revenue.net
-#MASTER# BLOCK-REFERRER: http://www.geocities.com/the_sockman1/index.html 10/15/06
-#MASTER# REMARKS: ..and any other page on geocities. Source of the obnoxious Geocities drop-in menu.
-.geocities.com/js_source
-#MASTER# BLOCK-REFERRER: http://www.google.com 09/28/06
-.dartsearch.net
-#MASTER# BLOCK-REFERRER: http://wunderground.com 11/02/06
-.zedo.com
-#MASTER# BLOCK-REFERRER: http://realtor.org 11/03/06
-.trk.sodoit.com/
-#MASTER# BLOCK-REFERRER: http://www.freenews.fr 11/23/06 Actionsfile feedback item #1597034
-.espace.netavenir.com
-#MASTER# BLOCK-REFERRER: http://www.powerdvd.com/ 12/28/06
-.hitfarm.com
-#MASTER# BLOCK-REFERRER: http://www.uk-businessdirectory.co.uk/
-#MASTER# REMARKS: Action tracker 1616457. Added 2007-01-20.
-.topnemo.com/engine
-.top100categories.com/engine
-#MASTER# REMARKS: Actionsfile feedback item #1647852 2007-01-30
-#MASTER# REMARKS: Domain squatting onload pop-ups
-#MASTER# BLOCK-REFERRER: http://www.memtest.com/
-/(t|search)\.php\?uid=ws[a-z0-9]+\.[a-z0-9]+
-#MASTER# BLOCK-REFERRER: via Yahoo groups
-#MASTER# REMARKS: Actionsfile tracker 1645513 2007-01-26
-.adinterax.com/(?!(.*)\.(js|gif|jpg))
-#MASTER# BLOCK-REFERRER:  http://www.weilpod.com
-#MASTER# REMARKS: Actionsfile feedback item #1710951 2007-05-02
-img.bluehost.com
-#MASTER# BLOCK-REFERRER: http://www.linuxinsider.com/story/57759.html
-#MASTER# REMARKS: Actionsfile feedback item #1736213 at 2007-06-12
-linuxinsider.com/images/sda/
-#MASTER# REMARKS: 20070711 Adam Piggott Actionsfile feedback #1700692
-#MASTER# REMARKS: Tracking JavaScript
-#MASTER# BLOCK-REFERRER: http://www.hants.gov.uk/record-office/
-[a-z].clickdensity.com
-#MASTER# REMARKS: Obnoxious "widget" adverts
-#MASTER# BLOCK-REFERRER: http://www.quickonlinetips.com/archives/2007/08/nokia-offers-free-bl-5c-battery-replacement-for-overheating/
-.widgetbucks.com
-#MASTER# BLOCK-REFERRER: http://www.dailymail.co.uk/pages/live/articles/news/news.html?in_article_id=559547&in_page_id=1770
-# Blocked URL = http://img.dailymail.co.uk/i/promo_boxes/groTime_promo.jpg
-# Blocked URL = http://img.dailymail.co.uk/i/promo_boxes/idealhome_promo.gif
-img.dailymail.co.uk/i/promo_boxes/
-#MASTER# REMARKS: Flash ad, Actionsfile feedback item #2003465 2008-07-01
-# Blocked URL = http://cache.opt.fimserve.com/contents/325/84/84325/LIN728x90.swf?%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20clickTag=http%3A//delb.opt.fimserve.com/lnk/%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%3Fk%3DODk1ODc7Mzs0MDA7ODQzMjU7Zi44LjkuaHYuaGdseHBzbG9uaCBvem0uNzYuZkBAeHp5b3ZAQGxobmxAQCs4XzlAQHhsbnN2biBoZHZ3dm1AQGh2QEBmOzEyMTQ1MTE1MjgzMzA7Mjs7MTMxfDsxOzQ7NzIxODs4ODAyODc3NQ%3D%3Dhref%3Dhttp%3A//www.myspace.com/liveinnordics&clickTarget=_new
-.fimserve.com
-#MASTER# REMARKS: Actionsfile feedback item #2004311 2008-07-01, are they all images?
-# Blocked URL = http://static.lycos-europe.net/lea/se/pricerunner/040608_728x90_payback_digitalkamer.gif
-static.lycos-europe.net
-#MASTER# REMARKS: Actionsfile feedback item #2005285
-#MASTER# BLOCK-REFERRER: http://hitta.se
-# Blocked URL = http://82.99.18.195/media.1/112/9460/146016/150x175_Hitta_FV_Feb08.gif
-82.99.18.195
-#MASTER# REMARKS: Actionsfile feedback item #1888197  2008-02-06
-#MASTER# REMARKS: Have a "go there anyway" link for clk.atdmt.com
-#MASTER# BLOCK-REFERRER: http://www.networkworld.com/resourcelibrary/?tid=4&type=special%20report
-# Blocked URL = http://clk.atdmt.com/
-.atdmt.com/
-
-#----------------------------------------------------------------------------
-# Misc Web-bugs, JS and just plain Junk. Images here aren't normal images.
-#----------------------------------------------------------------------------
-{+block{Might be a web-bug.} +handle-as-empty-document -handle-as-image}
-#MASTER# REMARKS: signature for user tracking nytimes, cnn.com,latimes.com and many others. 10/06/06
-/b/ss/.+
-#MASTER# BLOCK-REFERRER: http://www.thesun.co.uk/article/0,,11071-10784,00.html
-#MASTER# REMARKS: widespread hitbox signature 10/06/06
-/HG\?hc=
-#MASTER# BLOCK-REFERRER: http://macaddict.com 10/06/06
-.visistat.com
-#MASTER# REMARKS: See <http://www.google.com/analytics/> for user tracking.
-#MASTER# REMARKS: There is a ssl.google-analytics as well.
-.google-analytics./
-#MASTER# BLOCK-REFERRER: http://versiontracker.com and many others. 10/20/06
-/(.*/)?__utm.gif\?
-#MASTER# REMARKS: Below Moved here from -handle-as-image 10/16/06 ##########
-#MASTER# BLOCK-REFERRER: http://forums2.gardenweb.com/forums/orchids/ 09/25/06
-#MASTER# REMARKS: Mostly JS and plain text stuff
-.overture.
-#MASTER# PROBLEM-URL: http://www.linuxtoday.com/
-#MASTER# REMARKS: /adi has HTML snipplets for use in IFRAMEs 10/15/06
-.doubleclick.net/adi
-.doubleclick.net/(.*/)?adj/
-#MASTER# PROBLEM-URL: http://maps.yahoo.com/
-#MASTER# REMARKS: /AVE/iview has HTML snipplets for use in IFRAMEs 10/15/06
-view.atdmt.com/(.*/)?iview/
-#MASTER# REMARKS: Above Moved here from -handle-as-image 10/16/06 ##########
-#MASTER# REMARKS: Generic, re: tracking.foxnews.com/HG? 10/01/06
-tracking.
-#MASTER# BLOCK-REFERRER: http://netcraft.com and many others 10/22/06
-/(.*/)?adjs\.php\?
-#MASTER# BLOCK-REFERRER: http://washingpost.com and others 10/25/06
-/.*\.gif\?D=DM
-#MASTER# BLOCK-REFERRER: http://www.washingtonpost.com/
-#stats.surfaid.ihost.com/(crc/)?images/(bounce/)?uc.GIF
-#MASTER# BLOCK-REFERRER: http://www.ibm.com 10/09/06
-#MASTER# REMARKS: Similar hostname and paths appear in multiple locations.
-# Blocked URL = http://stats.surfaid.ihost.com/crc/images/bounce/uc.GIF
-# Blocked URL = http://stats.surfaid.ihost.com/rc/images/bounce/uc.GIF
-stats./c?rc/.*/uc.gif
-#MASTER# BLOCK-REFERRER: http://priceline.com 10/20/06
-#MASTER# REMARKS: User tracking, webbug stuff
-/(.*/)?dcs.gif\?&?dcs
-#MASTER# BLOCK-REFERRER: http://www.msnbc.com 10/07/06
-#MASTER# REMARKS: And MANY others. Webbug stuff.
-/(.*/)?c(lear)?\.gif\?.
-#MASTER# BLOCK-REFERRER: http://www.investorguide.com 10/08/06
-#MASTER# BLOCK-REFERRER: http://foodnetwork.com, http://gardenweb.com 10/20/06
-#MASTER# REMARK: webbug type gif used in MANY places.
-#MASTER# REMARK: Too many false positives
-#/(.*/)?(clear|(trans_?1x|blank)?1).gif
-#MASTER# REMARK: Let's try this way.
-/(.*/)?(clear|blank|(trans_?|1x)?1).gif\?.
-#MASTER# BLOCK-REFERRER: http://groups.yahoo.com/group/epdf/ 10/08/06
-.bc.yahoo.com/b\?P=
-#MASTER# BLOCK-REFERRER: http://www.motherboard.cz 10/30/06
-x*.alexa.com
-#MASTER# BLOCK-REFERRER: http://actorstheatre.org 11/02/06
-stats./.*\.gif\?
-#MASTER# BLOCK-REFERRER: http://mplayernetwork.com 11/07/06
-#MASTER# BLOCK-REFERRER: http://eetimes.com 09/26/06
-/event.ng/
-#MASTER# BLOCK-REFERRER: http://www.homedepot.com/ 11/08/06
-#MASTER# BLOCK-REFERRER: http://www.williams-sonoma.com/ 11/08/06
-/cm\?[tc]
-#MASTER# BLOCK-REFERRER: http://www.snapfiles.com/feedback/ 12/13/06 SF tracker
-.snapfiles.net/rotation/.*\.asp
-#MASTER# BLOCK-REFERRER: not provided. SF tracker #1616034 12/16/06
-#MASTER# COMMENT: JS pop-ups
-spa.snap.com/
-#MASTER# BLOCK-REFERRER: http://www.gamefaqs.com/computer/doswin/game/914819.html 12/18/06
-#MASTER# COMMENT: user tracking, and run-away assorted 'junk'
-#MASTER# BLOCK-REFERRER: http://formwood.com 2007-11-12
-.insitemetrics.com/
-#MASTER# COMMENT: user tracking, and assorted 'junk'
-#MASTER# BLOCK-REFERRER: http://blogblog.com 2007-11-12
-.extreme-dm.com/
-#MASTER# COMMENT: user tracking, and assorted 'junk'
-#MASTER# BLOCK-REFERRER: http://www.schillmania.com 2007-11-12
-stats.reinvigorate.net/
-#MASTER# COMMENT: user tracking, and assorted 'junk'
-#MASTER# BLOCK-REFERRER: http://wordpress.com 2007-11-12
-.getclicky.com/
-#MASTER# COMMENT: user tracking, and assorted 'junk'
-#MASTER# BLOCK-REFERRER: http://infoworld.com 2007-11-12
-.quantserve.com
-# Blocked URL = http://media.adrevolver.com/adrevolver/trace?sip=123&cpy=123
-media.adrevolver.com/
-
-#----------------------------------------------------------------------------
-# JavaScripts and Texts for ad and popup generation
-#----------------------------------------------------------------------------
-#MASTER# BLOCK-REFERRER: http://www.chip.de/artikel/c_artikelunterseite_10423683.html
-# Blocked URL = http://pagead.googlesyndication.example.com/foo/bar/baz.js
-pagead*.googlesyndication./.*\.js
-#MASTER# REMARKS: broadening scope from a.tfag.de/js.ng/ 10/23/06
-# Blocked URL = http://a.tfag.de/js.ng/
-/js\.ng/
-#MASTER# BLOCK-REFERRER: http://www.britannica.com/ 10/23/06
-/popunder
-#MASTER# BLOCK-REFERRER: http://www.pcmag.com/ 11/22/06 per SF Tracker # 1601148
-/js/slider\.js
-#MASTER# BLOCK-REFERRER: http://www.earthcore.com/ feedback item #1605385 12/14/06
-/t\.php\?cat=.*&kw=.*&sc=
-#MASTER# BLOCK-REFERRER: http://floodle.net 2007-01-21 SF tracker
-scripts.chitika.net/.*\.js
-#MASTER# REMARKS: Actionsfile tracker #1674363 2007-03-05, text ads
-#MASTER# BLOCK-REFERRER: http://www.securityfocus.com/archive/1/461489/30/0/threaded
-jlinks.industrybrains.com/
-#MASTER# BLOCK-REFERRER: via Yahoo groups
-#MASTER# REMARKS: Actionsfile tracker 1645513 2007-01-26
-.adinterax.com/.*\.js
-#MASTER# BLOCK-REFERRER: http://dictionary.reference.com/search?q=privacy&db=*
-#MASTER# REMARKS: Actionsfile tracker 1650798 2007-02-02
-.googleadservices.com/gampad/.*\.js
-#MASTER# BLOCK-REFERRER: http://www.linuxworld.com/news/2007/061307-brian-aker-interview.html
-#MASTER# REMARKS: Actionsfile feedback item #1736794 2007-06-13
-js.adsonar.
-#MASTER# BLOCK-REFERRER: http://news.zdnet.co.uk/software/0,1000000121,39209666,00.htm
-#MASTER# REMARKS: Actionsfile feedback item #1736879 2007-06-13, sponsored links. 2007-08-02, more hosts using this scheme, broadening scope.
-#bwp.zdnet.
-bwp.
-# Blocked URL = http://us.mc123.mail.yahoo.com/mc/stampNonJs
-.yahoo.com/mc/stampNonJs
-# Blocked URL = http://richmedia.yimg.com/js/123/personnals_banners/PER_happy_sara1_4_425x600/ad.js?q=123
-/.*/ad\.js\?
-# Blocked URL = http://ad.yieldmanager.com/st?ad_type=iframe&ad_size=728x90&site=123&section_code=123
-/.*\?ad_(type|size)=
-
-#############################################################################
-# Generic block-as-image patterns:
-#############################################################################
-{+block-as-image}
-# XXX: Should use "+block{Blocked image request.}", but Privoxy-Regression-Test
-# isn't smart enough to split that properly.
-# Sticky Actions = +block +handle-as-image
-#MASTER# BLOCK-REFERRER: http://experts-exchange.com/os2gen/
-/.*ad_?image\.(php|cgi)
-#MASTER# BLOCK-REFERRER: http://flashhentai.com/Tgp/28-09-2002/index4.html
-#MASTER# BLOCK-REFERRER: http://www.thughosting.com/www/ixix/a912/912s2.html
-#MASTER# BLOCK-REFERRER: http://www.fantasiegirl.com/cumshots/3/spunkpatrolgirl302.htm
-#MASTER# BLOCK-REFERRER: http://www.asianuncut.com/asian2/sep5628.html
-#MASTER# BLOCK-REFERRER: http://www.tatgirls.com/gals/redhot-2/kitty-carl/lb10.html
-#MASTER# BLOCK-REFERRER: http://www.cream-porn.com/1/hard/29/02.html
-/.*recips?/
-#MASTER# BLOCK-REFERRER: http://www.paroles.net/texte/10818
-/bandeaux/
-#MASTER# COMMENT: SF tracker 09/15/06
-/.*client_?ad\.(php|cgi)
-#MASTER# COMMENT: SF tracker 09/15/06
-/.*AIM_UAC.adp
-#MASTER# BLOCK-REFERRER: http://www.wunderground.com/ 2007-01-20
-#MASTER# COMMENT: banner at top of page http://server2.as5000.com/AS5000/adserver/click?ID=ADST-00015&C=0&T=1169332403
-/(.*/)?adserver/image
-#MASTER# COMMENT: Also from wunderground.com: http://icons-aa.wunderground.com/ads/images/TripAdvisor-Blinky.gif 2007-01-20
-# Blocked URL = http://icons-aa.wunderground.com/ads/images/TripAdvisor-Blinky.gif
-# URL = http://icons-aa.wunderground.com/ads/images/TripAdvisor-Blinky.gif
-/(.*/)?ads/images/
-
-#############################################################################
-# Site-specific block-as-image patterns:
-#############################################################################
-#----------------------------------------------------------------------------
-# Banner farms:
-#----------------------------------------------------------------------------
-#MASTER# BLOCK-REFERRER: http://www.cnn.com/
-#MASTER# BLOCK-REFERRER: http://www.aol.com/
-#MASTER# COMMENT: There are at least ar.atwola and pr.atwola. 10/01/06
-# Blocked URL = http://ar.atwola.com/
-# Blocked URL = http://pr.atwola.com/
-?r.atwola.com
-#MASTER# BLOCK-REFERRER: http://www.altavista.com/
-#MASTER# BLOCK-REFERRER: http://www.tecchannel.de/
-#MASTER# BLOCK-REFERRER: http://www.whowhere.lycos.com/
-#MASTER# REMARKS: Do NOT block /adj or /adi here since these are typically JS
-.[a-vx-z]*.doubleclick.net/(?!(.*/)?ad[ji])
-#MASTER# BLOCK-REFERRER: http://www.joecartoon.com/  10/17/06
-.*servedby.advertising.com
-#MASTER# BLOCK-REFERRER: http://www.yahoo.com/
-#.a.yimg.com/(?:(?!/i/).)*$
-#.a[0-9].yimg.com/(?:(?!/i/).)*$
-#.yimg.com/(.*/)?a/
-#.yimg.com/.*/(flash|java)/promotions
-#.yimg.com/a/.*/flash/
-#MASTER# REMARKS: The above replaced with below. Actions file tracker #1645616 2007-01-27
-.yimg.com/.*\.yimg\.com/a/
-bs*.gsanet.com
-bs*.einets.com
-.qkimg.net
-#MASTER# BLOCK-REFERRER: http://salon.com/ 10/19/06
-#MASTER# BLOCK-REFERRER: http://maps.yahoo.com/
-#MASTER# REMARKS: Banner farms; just exclude their corp. info
-#MASTER# REMARKS: and have a "go there anyway" link for clk.atdmt.com
-#MASTER# REMARKS:   (Actionsfile feedback item #1888197)
-[abd-vx-z]*.atdmt.com/
-#MASTER# BLOCK-REFERRER: http://www.exactaudiocopy.de/ 09/11/06
-#MASTER# BLOCK-REFERRER: http://stanford.facebook.com/home.php
-# URL = http://www.fastclick.net/
-.fastclick.net
-#MASTER# BLOCK-REFERRER: http://www.math.com/school/subject2/lessons/S2U3L6DP.html 09/11/06
-.casalemedia.com
-#MASTER# BLOCK-REFERRER: http://www.macnn.com/ 10/09/06
-kermit.macnn.com/
-#MASTER# BLOCK-REFERRER: http://www.globalseeker.com/freesamples/ 10/09/06
-quinst.com/images
-valuepage.com/images
-#MASTER# BLOCK-REFERRER: http://www.imdb.com/
-ia.imdb.com/.*\.swf
-#MASTER# BLOCK-REFERRER: http://www.dietngo.com/ 10/09/06
-.reactivpub.
-#MASTER# BLOCK-REFERRER: http://freemail.web.de/  10/17/06
-#MASTER# BLOCK-REFERRER: http://www.nytimes.com/2003/11/19/politics/19DEAN.html?ex=1069822800&en=dc82dfff0502faeb&ei=5062&partner=GOOGLE
-.as*.falkag.
-#MASTER# BLOCK-REFERRER: http://www.macnn.com/news/18944 10/17/06
-a.tribalfusion.com/
-#MASTER# BLOCK-REFERRER: http://reviews.infosyncworld.com/palmos/featured/index.html?start=1&offset=10 10/19/06
-.adserver.com/
-#MASTER# BLOCK-REFERRER: http://computers.cnet.com/hardware/0-1027-404-20857400.html?tag=rev
-#MASTER# REMARKS: Pointdexter
-.ru4.com/
-#MASTER# BLOCK-REFERRER: http://www.boursorama.com/infos/actualites/detail_actu_marches.phtml?news=1510287
-www.smartadserver.com/
-#MASTER# BLOCK-REFERRER: http://www.chez.tiscali.fr/ 10/07/06
-admedia.
-#MASTER# REMARKS: Bannerfarm used by Morpheus file sharing software
-jmcms.cydoor.com/
-#MASTER# BLOCK-REFERRER: http://www.tech-report.com/etc/2003q2/3dmurk03/index.x?pg=7
-#MASTER# REMARKS: Netshelter.com farm
-#MASTER# REMARKS: Not found but leaving 10/07/06
-.adtrix.com
-#MASTER# BLOCK-REFERRER: http://discussion.brighthand.com/forumdisplay.php?s=fee44a5b2a6fc2e9e79d6472bc8fbe94&forumid=197 10/19/06
-*[0-9].tribalfusion.com/
-#MASTER# REMARKS: Actions file tracker 1547656 09/02/06
-#MASTER# REMARKS: Update pattern: Actionsfile feedback item #1698822, was opened at 2007-04-11 to catch https://secure.img-cdn.mediaplex.com/0....
-# Blocked URL = https://secure.img-cdn.mediaplex.com/0/7454/43775/YA3149_17566_728x90_FCR_07.gif
-.img*.mediaplex.com
-#MASTER# BLOCK-REFERRER: http://www.tomshardware.com/ 09/28/06
-#MASTER# REMARKS: There is adfarm and altfarm.mediaplex
-#MASTER# REMARKS: 20070711 Actionsfile feedback #1749013 /ad/fm/ appended, as click-throughs were being blocked. Could only find adverts being served from /ad/fm/
-a*farm.mediaplex.com/ad/fm/
-#MASTER# REMARKS: Support request 1312362 09/08/06
-#MASTER# DUPLICATED: adserver.itsfogo.com
-#MASTER# REMARKS: Actionsfile feedback 09/11/06 http://matrix.mediavantage.de/mx.one?p=210&pa=1060&pb=1906&pd=10944&aid=399&x=120&y=240&ts=2005.06.27.21.38.08
-# URL = http://matrix.mediavantage.de/mx.one?p=210&pa=1060&pb=1906&pd=10944&aid=399&x=120&y=240&ts=2005.06.27.21.38.08
-#MASTER# BLOCK-REFERRER: http://www.heise.de/newsticker/meldung/61067
-matrix.mediavantage.
-#MASTER# REMARKS Ad generator, SF user tracker 09/11/06
-.cibleclick.com
-#MASTER# REMARKS: Ad generator 09/11/06  http://c1.netshelter.net/campaigns/ITTTech/itttech09_728x90.gif
-#MASTER# BLOCK-REFERRER: http://www.osnews.com/ 09/11/06
-.netracker.net
-#MASTER# REMARKS: ad generator domain per SF tracker 09/11/06
-.interclick.com
-#MASTER# REMARKS: Ad generator http://c4.maxserving.com/iserver/site=5314/area=ad728x90/aamfmt=normal/aamsz=banner/PageID=
-#MASTER# BLOCK-REFERRER: http://www.imdb.com/name/nm0000168/bio 09/12/06
-# URL = http://c4.maxserving.com/iserver/site=5314/area=ad728x90/aamfmt=normal/aamsz=banner/PageID=
-.maxserving.com
-#MASTER# REMARKS: Ad generator http://partner.gonamic.de/Affiliate/ViewCounter/index.cfm?trackingID=368232&bIsAffiliate=0
-#MASTER# BLOCK-REFERRER:  http://torrent.to/torrent/ 09/12/06
-# URL = http://partner.gonamic.de/Affiliate/ViewCounter/index.cfm?trackingID=368232&bIsAffiliate=0
-.gonamic.de
-# URL = http://img.webads.nl/
-.webads.
-#MASTER# REMARKS: Ad generator http://media.adlegend.com/centrport/20060/511290/GM_emplyee_300x250.gif
-# URL = http://media.adlegend.com/centrport/20060/511290/GM_emplyee_300x250.gif
-#MASTER# BLOCK-REFERRER:  http://news.yahoo.com/news?tmpl=story&cid=534&e=1&u=/ap/20050613/ap_on_he_me/cancer_research
-.adlegend.com
-#MASTER# REMARKS: Ad generator 09/12/06 http://dist.belnk.com//4/placement/1738/alt_offer/static.jpg
-# URL = http://dist.belnk.com//4/placement/1738/alt_offer/static.jpg
-#MASTER# BLOCK-REFERRER: http://groups.yahoo.com/group/louisianaandmardigra/messages/1?viscount=100
-.belnk.com
-.euros4click.
-#MASTER# BLOCK-REFERRER: http://www.planet3dnow.de/cgi-bin/newspub/viewnews.cgi?id=1129904195
-ads-*.quarterserver.
-#MASTER# BLOCK-REFERRER: http://adrian.adrian.org/ 10/07/06
-searchportal.information.com/
-#MASTER# BLOCK-REFERRER: http://www.nbc4.com/news/2672416/detail.html 10/17/06
-images.ibsys.com/
-#MASTER# BLOCK-REFERRER: http://www.rentalhouses.com/search_results.php?searchnew=1&citys_city=&citys_county=&citys_state=&ssubmit=Search&Szip=40205&keyword=&listingid=&strs_state=&strs_city=&strs_street= 11/05/06
-.lduhtrp.net/image
-#MASTER# BLOCK-REFERRER: http://floodle.net 2007-01-21 SF tracker
-scripts.chitika.net/.*\.(gif|png|jpg)
-#MASTER# REMARKS: Actionsfile feedback item #1648478 2007-01-30
-.projectwonderful.com/gen.php
-#MASTER# BLOCK-REFERRER: http://www.multimap.com/ (sporadic)
-#MASTER# REMARKS: Actionsfile feedback item #1665682 2007-02-21
-.akamai.net/.*\.adtech\.de/.*\.(gif|png)
-#MASTER# BLOCK-REFERRER: via Yahoo groups
-#MASTER# REMARKS: Actionsfile tracker 1645513 2007-01-26
-.adinterax.com/.*\.(gif|jpg)
-#MASTER# BLOCK-REFERRER: http://www.wotzon.com/profilepage.html?comp_id=1002310&CatID=2
-#MASTER# REMARKS: Ad generator per Actionsfile feedback item #1749870 2007-07-08
-# URL = http://img.directtrack.com
-img.directtrack.com
-#MASTER# BLOCK-REFERRER: http://www.thinkbroadband.com/news/3621-complaint-about-orange-broadband-advertising-upheld.html
-# URL = http://eas.apm.emediate.eu/media.5/1/1228/19193/ACT1215_120x600_v3.gif
-.emediate.eu/
-# URL = http://feedads.googleadservices.com/~a/dPlpGU767u4D4kVO8EGuUlnf1Q0/i
-# URL = http://feedads.googleadservices.com/~at/EpX-FnAXxwdaBSq-GRze37-rG0M/i
-.googleadservices.com/~
-#MASTER# REMARKS: Block yahoo email & ygroups banner ad
-# URL = http://ts.richmedia.yahoo.com/...hummingbird.jpg?adxq=NNN
-.richmedia.yahoo.com/.*\.(gif|jpe?g)\?ad
-# Blocked URL = http://this.content.served.by.adshuffle.com/p/a=/view.pxl
-.served.by.adshuffle.com/
-# Blocked URL = http://newsletter.adsonar.com/nwrss/imgs/nwr_123.PNG?placementId=123&plid=123&rotation=1&type=2&&url=NA
-.adsonar.com/.*/imgs/
-# Blocked URL = http://rtb.pclick.yahoo.com/images/nojs.gif?p=3
-.pclick.yahoo.com/images/
-# Blocked URL = http://rover.ebay.com/ar/1/2/3?mpt=123&adtype=1&size=728x90
-/.*\&adtype=
-
-#----------------------------------------------------------------------------
-# Cross-site user tracking
-#----------------------------------------------------------------------------
-#MASTER# REMARKS: +block-as-image here
-#MASTER# BLOCK-REFERRER: http://os2.ru/ 10/07/06
-.*.*.spylog.com/
-#MASTER# BLOCK-REFERRER: http://www.dhtmlplanet.com/ 10/07/06
-statse.webtrendslive.com
-#MASTER# BLOCK-REFERRER: http://www.versiontracker.com/
-#MASTER# REMARKS: 1) Used on many sites 2) URLs don't _end_ in .gif, hence +imageblock
-spinbox.versiontracker.com/.*\.(gif|jpg)
-#MASTER# BLOCK-REFERRER: http://mycroft.mozdev.org/ 10/07/06
-stat.onestat.com
-#MASTER# BLOCK-REFERRER: http://www.meparecebien.com/noticias/discograficas/sinnamon-records/sinnamon-records-libera-a-sus-artistas-nacionales-para-el-mercado-digital-401/
-#MASTER# REMARKS: Actionsfile feedback item #1644583 2007-03-05
-imp*.tradedoubler.com
-#MASTER# BLOCK-REFERRER: http://www.sharepoint.boo.pl/
-#MASTER# REMARKS: Not found, but left 10/07/06
-stat.webmedia.
-#MASTER# BLOCK-REFERRER: http://www.asp-php.net/index.php 10/07/06
-log*.xiti.com/
-log*.hit-parade.com/
-#MASTER# BLOCK-REFERRER: http://www.msnbc.com/news/884810.asp?0si=-&cp1=1
-# URL = http://www.xml.eshop.msn.com/tracksponsorimpression.asp
-www.xml.eshop.msn.com/tracksponsorimpression.asp
-#MASTER# BLOCK-REFERRER: http://www.planetgamecube.com/ 10/07/06
-.imrworldwide.com
-#MASTER# REMARKS: Actionsfile feedback 1555719 09/10/06, and Debian Bug report
-#MASTER# BLOCK-REFERRER: http://www.nrc.nl/ 09/12/06
-.clicktracks.com
-#MASTER# REMARK: Actionsfile tracker 1159072 09/12/06
-.etracker.
-#MASTER# REMARK: Actionsfile tracker 1243494 09/12/06
-#MASTER# BLOCK-REFERRER: http://www.spanked-slaves.com/movies14/bdsm14c.html
-.x-traceur.com
-#MASTER# BLOCK-REFERRER: http://www.aintitcool.com/ 10/05/06
-content.ipro.com
-#MASTER# BLOCK-REFERRER: http://www.weatherbug.com/default.asp 10/05/06
-.247realmedia.com
-#MASTER# BLOCK-REFERRER: http://www.samachar.com/ 10/05/06
-.sify.com
-#MASTER# BLOCK-REFERRER: http://www.nbc4.com/news/2672416/detail.html 10/06/06
-.searchignite.com
-#MASTER# BLOCK-REFERRER: http://www.sdtimes.com/ 10/07/06
-.statcounter.com
-#MASTER# BLOCK-REFERRER: http://www.dn.se/ 10/07/06
-.research-int.se/data
-#MASTER# BLOCK-REFERRER: http://www.chez.aliceadsl.fr/ 10/07/06
-.cybermonitor.com
-#MASTER# BLOCK-REFERRER: http://disney.go.com
-#MASTER# BLOCK-REFERRER: http://abcnews.com  10/15/06
-log.go.com/log
-#MASTER# BLOCK-REFERRER: http://www.care2.com 10/18/06
-stats.indextools.com
-#MASTER# BLOCK-REFERRER: http://www.techcrunch.com/ 12/16/06 #1616497 3 urls.
-tra*.measuremap.com
-.eurekster.com/sidebar
-tra*.mybloglog.com
-#MASTER# BLOCK-REFERRER:  http://www.polymervision.com/
-#MASTER# REMARKS: Actionsfile feedback item #1629370 01/16/07
-.guesttrace.
-#MASTER# BLOCK-REFERRER: http://dictionary.com
-#MASTER# REMARKS: Actionsfile feedback item #165078 2007-02-05
-insightxe./data/
-#MASTER# BLOCK-REFERRER:  http://www.unitedairlines.com
-#MASTER# REMARKS: Actionsfile feedback item #1650797 2007-02-05
-.insightfirst.com
-#MASTER# BLOCK-REFERRER: http://rss.slashdot.org/Slashdot/slashdot
-# Blocked URL = http://rss.slashdot.org/~a/Slashdot/slashdot?i=ofbWqX
-# URL = http://rss.slashdot.org/~a/Slashdot/slashdot?i=ofbWqX
-rss.slashdot.org/~a/Slashdot/slashdot\?
-# Blocked URL = http://rss.slashdot.org/~r/Slashdot/slashdot/~4/102113044
-# URL = http://rss.slashdot.org/~r/Slashdot/slashdot/~4/102113044
-rss.slashdot.org/~r/Slashdot/slashdot/~4/
-#MASTER# BLOCK-REFERRER: http://www.isys.ucl.ac.be/bchi/research/Kwaresmi.htm
-#MASTER# REMAKRKS: Actionsfile feedback item #1849627 2007-12-12
-[a-z][0-9].nedstatbasic.net/
-#MASTER# BLOCK-REFERER: http://feeds.feedburner.com/dilbertdailystrip/
-# Blocked URL = http://feeds.feedburner.com/~r/DilbertDailyStrip/~4/274512747
-#MASTER# BLOCK-REFERER: http://feeds.feedburner.com/PCLoadLetter
-# Blocked URL = http://feeds.feedburner.com/~r/PCLoadLetter/~4/270448381
-#MASTER# REMAKRKS: This seem to be a common pattern for web bugs in feedburner feeds.
-feeds.feedburner.com/~r/.*/~4/
-# Blocked URL = http://feedproxy.google.com/~r/DilbertDailyStrip/~4/y_kXD1z1HO0
-feedproxy.google.com/~r/.*/~4/
-# Blocked URL = http://feeds.feedburner.com/~a/DilbertDailyStrip?a=Ebzxel
-#MASTER# REMAKRKS: This looks like a pattern as well, maybe we should block feeds.feedburner.com/~a/ here.
-feeds.feedburner.com/~a/DilbertDailyStrip\?
-#MASTER# BLOCK-REFERER: http://www.buch.de/
-# URL = http://track.webtrekk.de/471497967328727/wt.pl?p=177,de.buch.show.home,1,1024x768,24,1,1218816426275,0,884x653,0&enc1=%FC&enc2=iso-8859-1&st=view&la=en-US&np=Default%20Plugi
-track.webtrekk.de/
-
-#----------------------------------------------------------------------------
-# Specific counters (see above for generic patterns)
-#----------------------------------------------------------------------------
-#MASTER# BLOCK-REFERRER: http://www.distrowatch.com/table.php?distribution=linex 10/19/06
-#MASTER# BLOCK-REFERRER: http://floodle.net 2007-01-21 tracker  #1641102
-s*.sitemeter.com/(meter|js/counter.js)
-#MASTER# BLOCK-REFERRER: http://personales.mundivia.es/lbouza/ 10/19/06
-# URL = http://fastcounter.bcentral.com/
-fastcounter.bcentral.com/
-#MASTER# BLOCK-REFERRER: http://osnews.com/ 10/19/06
-# URL = http://bilbo.counted.com/
-bilbo.counted.com/
-
-#----------------------------------------------------------------------------
-# On-site ads and other single sources:
-#----------------------------------------------------------------------------
-#MASTER# BLOCK-REFERRER: http://www.travelocity.com/Vacations/0,,TRAVELOCITY||Y,00.html?HPTRACK=mpc_vac
-#MASTER# BLOCK-REFERRER: http://dest.travelocity.com/DestGuides/geo_frontdoor/0,,TRAVELOCITY,00.html?HPTRACK=icon_dest 10/07/06
-.travelocity./Sponsor_gifs/
-#MASTER# REMARKS: Referenced from HTML-Emails (not checked 10/08/06)
-# URL = http://foo.weather.com/creatives/
-# URL = http://bar.weather.com/web/services/email/
-.weather.com/creatives/
-.weather.com/web/services/email/
-#MASTER# BLOCK-REFERRER: http://gamespot.com/gamespot/filters/0,10850,6013548,00.html 10/08/06
-/.*/topslots/topslot
-.contextweb.com/
-.offermatica.com/
-#MASTER# BLOCK-REFERRER: http://www.jpost.com/ 10/08/06
-.adbrite.com
-#MASTER# BLOCK-REFERRER: http://www.jpost.com/servlet/Satellite?pagename=JPost/A/JPArticle/ShowFull&cid=1038889003183
-.jpost.com/images/\d+/promos/
-#MASTER# BLOCK-REFERRER: http://www.infoempleo.com/ 10/08/06
-.infoempleo.com/(pop-up|images(/Nueva/|/motor))
-#MASTER# BLOCK-REFERRER: http://www.hardocp.com/ 10/08/06
-hera.hardocp.com/
-#MASTER# BLOCK-REFERRER: http://people.aol.com/ 10/08/06
-leadback.advertising.
-#MASTER# BLOCK-REFERRER: http://astalavista.box.sk/ 10/08/06
-.yieldmanager.com/
-.displayadsmedia.com
-# URL = http://astalavista.box.sk/adult.foo.jpg
-astalavista.box.sk/adult.*\.jpg
-#MASTER# BLOCK-REFERRER: http://www.bol.com.br/
-smartad.*.*.*
-#MASTER# BLOCK-REFERRER: http://www.dinside.no/ 10/08/06
-.dinside.no/annonsorer/
-#MASTER# BLOCK-REFERRER: http://www.heise.de/ 10/08/06
-#MASTER# BLOCK-REFERRER: http://www.spiegel.de/
-/RealMedia/ads/
-#MASTER# REMARKS: Variation 2007-11-12
-/RealMediaAds/
-#MASTER# BLOCK-REFERRER: http://www.powerdvd.com 12/28/06 per SF tracker
-/top\.php\?d=.*\.[a-z]{2,5}
-#MASTER# REMARKS: Actionsfile feedback item #1764161 2007-07-31
-#MASTER# BLOCK-REFERRER: http://www.webster.com/dictionary/revering
-.google.com/afsonline
-
-#############################################################################
-# Site-specific unblockers:
-#############################################################################
-{-block}
-# Sticky Actions = -block
-#MASTER# UNBLOCK-REFERRER: http://www.faqs.org/
-.faqs.org/banner\.html
-#MASTER# UNBLOCK-REFERRER: http://bannerblind.mozdev.org/
-bannerblind.mozdev.org
-#MASTER# UNBLOCK-REFERRER: http://advogato.org/
-advogato.org
-#MASTER# UNBLOCK-REFERRER: http://www.handelsblatt.com/
-ad*.vhb.de
-#MASTER# UNBLOCK-REFERRER: http://www.globalintersec.com/adv/sendtemp-2001021302.txt
-.globalintersec.com/adv
-#MASTER# UNBLOCK-REFERRER: http://www.wunderground.com/geo/BannerPromo/US/NY/New_York.html 10/08/06
-banners.wunderground.com/
-#MASTER# UNBLOCK-REFERRER: http://www.openoffice.org/ 10/09/06
-.openoffice.org/banners/
-#MASTER# UNBLOCK-REFERRER: http://www.amazon.com/exec/obidos/tg/browse/-/130/ref=gw_br_dvd/102-9730978-3540926 10/09/06
-#MASTER# REMARKS: Part of site decoration
-.amazon.com/.*/banners/
-#MASTER# UNBLOCK-REFERRER: http://www.washingtonpost.com/wp-dyn/articles/A43890-2002Aug4.html
-#MASTER# REMARKS: Javascripts whose absence messes the page
-.washingtonpost.com/wp-srv/
-# URL = http://www.gnome.org/images/banner-gnomeis
-.gnome.org
-#MASTER# UNBLOCK-REFERRER: http://www.nycsubway.org/ 10/09/06
-.nycsubway.org/img/banner
-#MASTER# UNBLOCK-REFERRER: http://www.forgotten-ny.com/ADS/manhattanads/moremahnattan.html
-# URL = http://www.forgotten-ny.com/ADS/manhattanads/moremahnattan.html
-.forgotten-ny.com/ADS/
-# URL = http://counter.li.org
-counter.li.org
-#MASTER# UNBLOCK-REFERRER: http://adrian.adrian.org/ 10/09/06
-# URL = http://adrian.adrian.org
-adrian.adrian.org
-#MASTER# UNBLOCK-REFERRER: http://adela.karlin.mff.cuni.cz/ 10/09/06
-# URL = http://adela.karlin.mff.cuni.cz
-adela.karlin.mff.cuni.cz
-#MASTER# UNBLOCK-REFERRER: http://www.swcp.com/rtoads/printmag/issue3/neg_data.html 10/09/06
-.swcp.com/rtoads/
-#MASTER# UNBLOCK-REFERRER: http://www.privoxy.org/actions/index.php
-#MASTER# REMARKS: Don't block our own feedback process, even if the
-#MASTER# REMARKS: parameters contain block patterns
-# URL = http://www.privoxy.org/actions/index.php
-.privoxy.org
-#MASTER# UNBLOCK-REFERRER: http://sourceforge.net/help/tracker.php
-sourceforge.net/.*tracker
-#MASTER# UNBLOCK-REFERRER: http://www.brawnylads.com/
-# URL = http://www.brawnylads.com/
-.brawnylads.com
-#MASTER# UNBLOCK-REFERRER: http://adzapper.sourceforge.net/
-# URL = http://adzapper.sourceforge.net/
-adzapper.
-#MASTER# UNBLOCK-REFERRER: http://de.altavista.com/web/adv
-# URL = http://de.altavista.com/web/adv
-.altavista.com/web/adv
-# URL = http://rads.mcafee.com/rads/scripts/RADS.dll?QueryProduct2
-rads.mcafee.com/
-# URL = http://linuxfromscratch.org/cgi-bin/lfscounter.cgi
-linuxfromscratch.org/
-#MASTER# UNBLOCK-REFERRER: http://dv411.com/advc50.html
-# URL = http://dv411.com/advc50.html
-dv411.com/.*advc50
-# URL = http://www.freeswan.org/freeswan_trees/freeswan-1.98b/doc/adv_config.html
-.freeswan.org/
-# URL = http://www.arm.com/support/ads_faq?OpenDocument&ExpandSection=11
-www.arm.com/.*ads
-# URL = http://www.anybrowser.org/campaign/
-www.anybrowser.org/
-# URL = http://www.tads.org/
-www.tads.org/
-# URL = http://www.mbe.com/redir/packtrack.asp
-.mbe.com/redir/packtrack.asp
-.iship.com/trackit/
-# URL = http://www.esis.com.au/AdvSerialCards/Firewire.htm
-.esis.com.au/AdvSerialCards
-#MASTER# UNBLOCK-REFERRER: http://www.familysearch.org/ 10/11/06
-.familysearch.org/.*banner
-#MASTER# UNBLOCK-REFERRER: http://coder.com/ 10/11/06
-coder.com/creations/banner/
-#MASTER# UNBLOCK-REFERRER: http://arnolds.dhs.org/static/adv_tools.html 10/11/06
-# URL = http://arnolds.dhs.org/static/adv_tools.html
-arnolds.dhs.org/static/adv_tools.html
-#MASTER# UNBLOCK-REFERRER: http://www.gpl.org/
-.gpl.org/
-#MASTER# UNBLOCK-REFERRER: http://europa.eu.int/yourvoice/ 10/11/06
-.europa.eu.
-#MASTER# UNBLOCK-REFERRER: http://www.schooner.com/~loverso/no-ads/ 10/11/06
-# URL = http://www.schooner.com/~loverso/no-ads/
-.schooner.com/~loverso/no-ads/
-#MASTER# UNBLOCK-REFERRER: http://source.bungie.org/ 10/11/06
-source.bungie.org/
-# URL = http://adonthell.linuxgames.com/
-adonthell.linuxgames.com/
-#MASTER# UNBLOCK-REFERRER: http://news.bbc.co.uk/furniture/chinese/banner/bbccantonese_600.gif
-#MASTER# REMARKS: Banner-free site(s).
-.bbc.co.uk/
-# URL = http://adc.netlabs.org/
-adc.netlabs.org/
-#MASTER# UNBLOCK-REFERRER: http://www.tela.bc.ca/tads/authoring/multimedia-tads-docs/latin2.htm 10/11/06
-# URL = http://www.tela.bc.ca/tads/authoring/multimedia-tads-docs/latin2.htm
-.tela.bc.ca/tads/
-# URL = http://adbusters.org/information/
-adbusters.org/
-# URL = http://www.eads.com/
-# URL = http://www.eads.net/
-# URL = http://www.eads.de/
-.eads.*/
-# URL = http://brew.qualcomm.com/brew/en/developer/resources/ad/documentation.html
-.qualcomm.com/brew/en/developer/resources/ad/
-# URL = http://upgrade.bitdefender.com/update71/avx/Plugins/adsntfs.xmd.gzip
-/update\d\d/.*adsnt.*
-#MASTER# UNBLOCK-REFERRER: http://msdn.microsoft.com/ 09/11/06
-.microsoft.com/.*masthead
-#MASTER# UNBLOCK-REFERRER: http://indymedia.org adfree site 09/11/06
-.indymedia.org
-# URL = http://www.seanbaby.com/stupid/comicads05.shtml
-.seanbaby.com
-# URL = http://www.cels.org/db/keep-track.pl?cat:1
-.cels.org/.*track
-#MASTER# UNBLOCK-REFERRER: http://www.nic.ad.jp/ See http://jprs.co.jp/en/jpdomain.html 09/11/06
-#MASTER# REMARKS: 2007-10-04, increase scope per Actionsfile feedback item #1807613
-#.nic.ad.jp
-#MASTER# REMARKS removed .ad.jp per Actionsfile feedback item #1807613
-#MASTER# UNBLOCK-REFERRER: http://www.flickr.com/photo_zoom.gne?id=32594118&size=l 09/11/06
-#MASTER# REMARKS: creativecommons.org worthwhile organization 09/11/06
-/(.*/)?somerights20.gif
-.creativecommons.org
-# URL = http://www.ups.com/WebTracking/track?loc=en_US
-.ups.com/.*/track
-#MASTER# UNBLOCK-REFERRER: http://adju.st 09/12/06
-.adju.
-#MASTER# REMARKS: Ad-free art site 09/12/06
-.rubberslug.com
-.freebsd.org
-.fsf.org
-.gnu.org
-#MASTER# REMARKS: SF tracker 09/15/06, and #1750779 2007-07-09
-#MASTER# REMARKS: New home? http://adiumx.cachefly.net/Adium_1.0.5.dmg
-adium*.*.
-#MASTER# UNBLOCK-REFERRER: http://google.com 10/01/06
-#MASTER# REMARKS: This allows many (but not all) Google "Sponsored Links" to function.
-#MASTER# REMARKS: Presumably if someone clicks these they want to go there.
-.googleadservices./pagead/adclick
-#MASTER# UNBLOCK-REFERRER: http://www.garaget.org
-#MASTER# REMARKS: These are "ads" from individuals selling cars per tracker. 10/06/06
-.garaget.org/annonser/
-#MASTER# UNBLOCK-REFERRER: http://www.macworld.com/ 10/07/06
-#MASTER# REMARKS: Without the unblock, the page layout is horribly broken 10/08/06
-edge.macworld.com
-#MASTER# UNBLOCK-REFERRER: http:// www.discovery.de  10/19/06
-#MASTER# REMARKS: These are promos relevant to the page content.
-.discovery./.*/topads/
-#MASTER# UNBLOCK-REFERRER: http://dawn.com
-#MASTER# REMARKS: SF Actionsfile tracker 10/19/06. These images are not ads.
-.dawn.com/.*/(9690dina|aurora_award)\.
-#MASTER# UNBLOCK-REFERRER: http://google.com/reader/
-#MASTER# REMARKS: Initial page does not load, per Support request 10/27/06
-.google.com/reader/
-#MASTER# REMARKS: Actionsfile Tracker 1587079 10/30/06
-.parcel2go.com/track
-#MASTER# REMARKS: Actionsfile Tracker #1612950 12/11/06
-.amazon.com/gp/gift-central/.*recip/
-#MASTER# UNBLOCK-REFERRER: http://yahoo.com 2007-01-27
-#MASTER# REMARKS: Actionsfile Tracker #1645501, this is a UI page element.
-.yimg.com/.*/themes/ad/
-#MASTER# UNBLOCK-REFERRER: http://mozilla.hongo.wide.ad.jp/pub/mozilla.org//thunderbird/releases/
-#MASTER# REMARKS: Actionsfile feedback item #1672918 2007-03-03
-# URL = http://mozilla.hongo.wide.ad.jp/pub/mozilla.org//thunderbird/releases/
-.ad.*/pub/mozilla.org/
-# URL = http://lads.myspace.com/mini/mini.swf?b=NDgwNzU1ODE=&o=NjQwNzIzMA==&d=MTE3NDI4ODcwNg==&i=MA==&a=VHJ1ZQ==
-#MASTER# UNBLOCK-REFERRER: http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=5282733
-#MASTER# UNBLOCK-REFERRER: http://lads.myspace.com/videos/vplayer.swf
-#MASTER# REMARKS: MySpace videos caught by .*ads. The above profile.myspace.com link grabs the vplayer.swf file (which does not work when directly fetched)
-# URL = http://lads.myspace.com/videos/vplayer.swf
-lads.myspace.com
-#MASTER# REMARKS: 20070402 Adam Piggott first-party tracking. 20070411 Moved from generic unblockers by path to site-specific unblockers.
-#MASTER# UNBLOCK-REFERRER: http://www.shockwave.com/servlet/DownloadEcommTracker?sku=fizzball-pc&promoCode=SiteShockwaveLandingPage
-# URL = http://www.shockwave.com/servlet/DownloadEcommTracker?sku=fizzball-pc&promoCode=SiteShockwaveLandingPage
-.shockwave.com/servlet/DownloadEcommTracker
-#MASTER# REMARKS: 20070411 Adam Piggott fish4.co.uk is a popular UK advertising site for cars, properties and jobs and uses ad/advert all over the place, understandably.
-# URL = http://www.fish4.co.uk/iad/lettings/advert?adId=12389712&src=nestoria
-.fish4.co.uk/.*ad
-#MASTER# REMARKS: Actionsfile feedback item #1700037 2007-04-13 HB
-# URL = http://www.mp3.com.au/popup/popup.asp?id=110433
-.mp3.com.au/.*popup
-#MASTER# REMARKS Actionsfile feedback #1700915 2007-04-15
-# URL = http://www.svd.se/ego/339/http://www.e24.se/dynamiskt/reklam_media/did_15092793.asp
-# URL = http://www.e24.se/dynamiskt/reklam_media/did_15092793.asp
-/(.*/)?dynamiskt/reklam_media/did_
-#MASTER# REMARKS 20070710 Actionsfile feedback #1751020
-switch.atdmt.com/action/
-# URL = http://www.parcelforce.com/portal/pw/track?catId=7500082
-.parcelforce.com/.*track
-#MASTER# UNBLOCK-REFERRER: redirect from http://go.microsoft.com/fwlink?linkid=51093
-#MASTER# REMARKS: Actionsfile feedback item #1757121 2007-07-19
-.microsoft.com/.*/adschema/
-# URL = http://upload.wikimedia.org/wikipedia/en/a/ad/Picturecarnegie.jpg
-.wikimedia.org/
-# URL = http://en.wikipedia.org/wiki/Advertisement
-.wikipedia.org/
-#MASTER# REMARKS Actionsfile feedback item #2299717 2008-11-16
-# URL = http://en.wiktionary.org/wiki/advertisement
-.wiktionary.org/
-# URL = http://curl.haxx.se/docs/adv_20070710.html
-.haxx.se/docs/adv_
-# URL = http://www.google.com/adsense/
-www.google.com/adsense/
-# URL = http://www.encyclopediadramatica.com/Advertisement
-# URL = http://images.encyclopediadramatica.com/images/b/b5/Advertising-Dierentuin.jpg
-.encyclopediadramatica.com/
-#MASTER# UNBLOCK-REFERRER: http://lifehacker.com 2008-04-18 HB
-# URL = tags.gawker.com/assets/minify.php?files=/assets/base.v6/css/global.css,/assets/base.v6/css/header.css,/assets/base.v6/css/sidebar.css,/assets/base.v6/css/content.css,/assets/base.v6/css/images.css,/assets/base.v6/css/ads.css,/assets/base.v6/css/community.css,/assets/base.v6/css/comments.css,/assets/base.v6/css/messages.css,/assets/base.v6/css/ui.css
-tags.gawker.com/.*css$
-# URL = http://cgi.tnt.co.uk/TrackNTrace/quicktrack.asp
-.tnt.co.uk/TrackNTrace/
-#MASTER# UNBLOCK-REFERRER: http://www.supermediastore.com/trackorder.html
-# URL = http://secure.howtoburndvd.net/ups/track.php
-/ups/track\.php
-#MASTER# REMARKS: Actionsfile feedback item #1886140  2008-02-04
-#MASTER# UNBLOCK-REFERRER: http://idonthateyouall.imeem.com/video/8zH0_f9i/kiley_rilo_pull_me_in_tighter_art_video/
-# URL = http://ad.doubleclick.net/crossdomain.xml
-ad.doubleclick.net/crossdomain\.xml
-#MASTER# REMARKS: Actionsfile feedback item #2021509  2008-07-18
-#MASTER# REMARKS: Allow realplayer site help popup windows
-#MASTER# UNBLOCK-REFERRER: http://real.custhelp.com/cgi-bin/real.cfg/php/enduser/std_adp.php?p_faqid=4512
-# URL = http://real.custhelp.com/cgi-bin/real.cfg/php/enduser/popup_adp.php
-real.custhelp.com/cgi-bin/real\.cfg/php/enduser/popup_adp\.php
-# URL = http://fritz.fonwlan.box/cgi-bin/webcm?getpage=../html/de/help/popup.html&var:lang=de&var:pagename=hilfe_syslog&var:anker=24
-fritz.fonwlan.box/
-# URL = http://fritz.box/cgi-bin/webcm?getpage=../html/de/help/popup.html&var:lang=de&var:pagename=hilfe_syslog&var:anker=24
-fritz.box/
-#MASTER# REMARKS: Actionsfile feedback item #2043327 2008-08-08
-# URL = http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402747&sliceId=1
-.adobe.com
-# URL = http://qa.debian.org/popcon.php
-qa.debian.org/popcon\.php
-#MASTER# REMARKS: Support Requests item #2432535 2008-12-16
-# URL = http://www.mta.info/bandt/traffic/advmain.htm
-.mta.info/.*advmain.htm$
-#MASTER# REMARKS: We also use this as a light character class test, therefore the additional URL directives.
-# URL = http://www.proaurum.de/bannerA2/image/pro_master_r3_01_04.gif
-# URL = http://www.proaurum.de/bannerA1/image/limitorder2.gif
-# URL = http://www.proaurum.de/bannerA3/image/pro_master_r5_banken_01_01+.gif
-# URL = http://www.proaurum.de/bannerB2/image/pro_banner_mitte.gif
-# URL = http://www.proaurum.de/bannerB1_/image/pro_banner_links.gif
-# URL = http://www.proaurum.de/bannerC1/image/partner1.png
-.proaurum.de/banner[ABC]\d_?/
-# URL = http://www.goldmoney.com/en/images/home/banner_r4_c1.gif
-.goldmoney.com/
-#MASTER# REMARKS: Actionsfile feedback item #2017126  2008-07-13
-#MASTER# REMARKS: The dutch newspaper site of Algemeen Dagblad (http://www.ad.nl) is blocked
-# URL = http://www.ad.nl/
-.ad.nl/
-#MASTER# REMARKS: yahoo groups self-promotion - and the page is uglier without it
-# URL = http://us.i1.yimg.com/us.yimg.com/i/yg/img/ads/bestofygroups.jpg
-.yimg.com/.*/ads/bestofygroups.jpg$
-#MASTER# REMARKS: NYT home page is messed up because .css files are blocked
-#MASTER# UNBLOCK-REFERRER: http://www.nytimes.com/
-# URL = http://graphics8.nytimes.com/css/0.1/screen/common/ads.css
-# URL = http://graphics8.nytimes.com/css/0.1/screen/homepage/ads.css
-.nytimes.com/.*/ads\.css$
-
-
-#############################################################################
-# Site-specific special rules:
-#############################################################################
-
-#----------------------------------------------------------------------------
-# These sites are very complex (read: keen on your identity) and require
-# minimal interference.
-#----------------------------------------------------------------------------
-{fragile}
-.office.microsoft.com
-.windowsupdate.microsoft.com
-#MASTER# PROBLEM URL: http://metrics.apple.com 10/11/06
-# too broad: .apple.com
-www.apple.com
-store.apple.com
-images.apple.com
-#MASTER# REMARKS: Actions Tracker 1293057 09/02/06
-.update.microsoft.com
-#MASTER# REMARKS: Various reports 09/16/06. This site also requires pop-ups.
-mail.google.
-
-#----------------------------------------------------------------------------
-# Semi-fragile, allow for blocks.
-#----------------------------------------------------------------------------
-{ -crunch-all-cookies -filter -fast-redirects -hide-referer -prevent-compression }
-#MASTER# REMARKS: Problem URL: adserver.yahoo.com 10/01/06
-#MASTER# REMARKS: This is much too broad for my taste. It forces me to add
-#MASTER# REMARKS: a special yahoo section in my user.action file, just to
-#MASTER# REMARKS: confirm my defaults in default.action. fk 2007-01-19
-.yahoo.com
-
-#----------------------------------------------------------------------------
-# Shopping and banking sites - allow cookies and pop-ups
-#----------------------------------------------------------------------------
-#MASTER# REMARKS: This section not checked 10/11/06 HB
-{shop}
-.quietpc.com
-.worldpay.com   # for quietpc.com
-.jungle.com
-.dabs.com
-.overclockers.co.uk
-.db24.de
-.ebay.
-.mobile.de
-www.fondationlejeu.com
-www.techtv.com
-.mywebgrocer.com
-
-#----------------------------------------------------------------------------
-# Subscription sites (with credible privacy policy) - allow permanent cookies
-#----------------------------------------------------------------------------
-{-session-cookies-only}
-#MASTER# PROBLEM-URL: http://www.nytimes.com/auth/login
-.nytimes.com/
-#MASTER# PROBLEM-URL: http://www.volkskrant.nl/
-.volkskrant.nl/
-
-#----------------------------------------------------------------------------
-# These sites require pop-ups, so don't use the unconditional filters.
-#----------------------------------------------------------------------------
-{allow-popups}
-#MASTER# PROBLEM-URL: http://www.aprilbarrows.com/discography.html
-www.aprilbarrows.com/discography\.html$
-#MASTER# PROBLEM-URL: http://www.nvidia.com/view.asp?PAGE=windows2000
-.nvidia.com
-#MASTER# PROBLEM-URL: http://www15.chathouse.com/games/
-www*.chathouse.com/games/
-#MASTER# PROBLEM-URL: http://www.bild.de/
-.bild.t-online.de
-#MASTER# PROBLEM-URL: http://www.netflix.com/
-.netflix.com
-#MASTER# PROBLEM-URL: http://my.aol.com/
-my.aol.com
-#MASTER# PROBLEM-URL: http://www.cnn.com/
-#MASTER# REMARKS: Re-enable "Story Tools" i.e. printing, emailing etc.
-i.cnn.net/cnn/.*/clickability/button
-#MASTER# PROBLEM-URL: http://www.rosettaproject.org:8080/live/search/contribute/swadesh/view?ethnocode=SPN
-.rosettaproject.org
-#MASTER# PROBLEM-URL: http://www.quantum.com requires popups for downloads, etc. 09/11/06
-.quantum.com
-#MASTER# PROBLEM-URL: http://www.liberation.fr 11/23/06 Actions tracker
-.liberation.fr
-
-#----------------------------------------------------------------------------
-# Sometimes (i.e. often!) fast-redirects catches things by mistake
-#----------------------------------------------------------------------------
-#MASTER# REMARKS: This section NOT checked 10/13/06 HB
-{-fast-redirects}
-# Sticky Actions = -fast-redirects
-www.ukc.ac.uk/cgi-bin/wac\.cgi\?
-#MASTER# PROBLEM-URL: http://www.google.com/search?q=foo
-.google.
-#MASTER# PROBLEM-URL: http://de.altavista.com/q?pg=q&q=foo&kl=XX&search.x=28&search.y=8&what=web
-.altavista.com/(.*(like|url|link):|trans.*urltext=)http
-#MASTER# PROBLEM-URL: http://www.speedfind.de/cgi-bin/search?q=foo&t=STANDARD
-.speedfind.de
-#MASTER# PROBLEM-URL: http://www.nytimes.com/
-.nytimes.com
-#MASTER# REMARKS: Yahoo logout URL after first redirect. fk 2007-01-19
-#MASTER# REMARKS: Logout fails if we fast-redirect to the URL after "done=".
-#MASTER# REMARKS: Reported in support request #1635354.
-# URL = http://login.yahoo.com/config/login?logout=1&.done=http://mail.yahoo.com&.src=ym&.intl=us
-.yahoo.com/.*done=http
-#MASTER# REMARKS: Reported in support request #1802365.
-# URL = http://us.rd.yahoo.com/reg/login1/lisu/login/uk/ym/*http://edit.europe.yahoo.com/c onfig/login?.tries=1&.src=ym&.md5=&.hash=&.js=1&.last=&...kP=Y&.done=http://mail .yahoo.com&.pd=ym_ver=0&c=&login=XXX&passwd=XXX&.persistent =&.hash=1&.md5=1
-.rd.yahoo.com/reg/login1/
-# URL = http://validator.w3.org/check
-.w3.org
-#MASTER# PROBLEM-URL: http://www.ask.com/
-.directhit.com
-#MASTER# PROBLEM-URL: http://www.zagats.com/
-.zagats.com
-#MASTER# PROBLEM-URL: http://www.passport.com/Consumer/default.asp?lc=1033
-#MASTER# PROBLEM-URL: http://www.msn.com/
-# URL = http://www.passport.com/Consumer/default.asp?lc=1033&msppchlg=1&mspplogin=
-my.msn.com/passport/pp(consent|set)\.ashx\?msnru=
-www.passport.com/Consumer/default\.asp\?lc=[0-9]+&msppchlg=[01]&mspplogin=
-login.passport.com/logout\.(asp|srf)\?
-#MASTER# PROBLEM-URL: http://www.fileplanet.com
-download.com.com/redir\?
-www.fileplanet.com/redir\.asp\?
-#MASTER# PROBLEM-URL: http://cyber.law.harvard.edu/filtering/china/test/
-.edu
-#MASTER# PROBLEM-URL: http://web.archive.org
-# URL = http://web.archive.org/web/19970715180251/http://www.gmd.de/
-.archive.org
-# URL = http://www.guenstiger.de/gt/link.asp?url=http://www.edv-supermarkt.de&source=produkt=238284&USID=00086443917155&hnr=2199&pnr=238284&ppr=158,00
-www.guenstiger.de
-# URL = http://anon.free.anonymizer.com/http://www.privoxy.org/
-.anonymizer.com
-# URL = http://www.mailtothefuture.com/public/logon?http://www.mailtothefuture.com/
-www.mailtothefuture.com
-#MASTER# PROBLEM-URL: http://support.microsoft.com/default.aspx?scid=KB;en-us;q219110
-support.microsoft.com/
-# URL = http://www.alexa.com/data/details/traffic_details?q=blogspot&url=http://www.blogalia.com
-.alexa.com
-# URL = http://www.translate.ru/url/tran_url.asp?lang=es&url=http%3A%2F%2Fos2progg.by.ru%2Findex.shtml&direction=rs&template=General&cp1=NO&cp2=NO&autotranslate=on&transliterate=on&psubmit2.x=68&psubmit2.y=12
-www.translate.ru/url/
-# URL = http://schneegans.de/sv/?url=http%3A%2F%2Fwww.freebsd.org%2F&schema=%28Detect+automatically%29&encoding=%28Detect+automatically%29&htmlcomp=%28Detect+automatically%29
-schneegans.de/
-# URL = http://config.privoxy.org/edit-actions-submit?f=user..&redirect_mode=http%3A%2F%2Fwww.privoxy.org%2F
-config.privoxy.org/
-# URL = http://users.wsj.com/lmda/do/checkLogin?mg=evo-wsj&url=http%3A%2F%2Fonline.wsj.com%2Farticle%2FSB117313867582027623.html
-.wsj.com/lmda/do/checkLogin
-#MASTER# REMARKS: As we already have five other PROBLEM-URLs that contain '?url=',
-#MASTER# REMARKS: it might make sense to allow '/.*?url=' in general
-# URL = http://del.icio.us/url/check?url=http%3A%2F%2Fwww.privoxy.org
-del.icio.us/
-# URL = http://calgary.ctv.ca/servlet/RTGAMArticleHTMLTemplate/B/20070615/goexpo?brand=generic&hub=&tf=CFCNPlus/generic/hubs/frontpage.html&cf=CFCNPlus/generic/hubs/frontpage.cfg&slug=goexpo&date=20070615&archive=CFCNPlus&ad_page_name=&nav=home&subnav=fullstory&site_cfcn=http://calgary.ctv.ca
-.ctv.ca/.*&site_cfcn=http://
-# URL = http://memberservices.informit.com/checkLogin.ashx?partner=8&r=http%3a%2f%2fwww.informit.com%2farticles%2farticle.asp%3fp%3d766375%26seqNum%3d1
-.informit.com/.*&r=http%3a%2f%2f
-# URL = http://access.adobe.com/access/getStatus.do?jobid=&srcPdfUrl=http://cups.cs.cmu.edu/soups/2007/proceedings/p41_clark.pdf&convertTo=html&visuallyImpaired=preferhtml&preferHTMLReason=&platform=&comments=&starttime=1187362172109
-access.adobe.com/access/getStatus.do\?jobid=&srcPdfUrl=
-# URL = http://view.samurajdata.se/ps.php?url=http%3A%2F%2Fcups.cs.cmu.edu%2Fsoups%2F2007%2Fproceedings%2Fp41_clark.pdf&submit=View%21
-view.samurajdata.se/ps\.php\?url=
-# URL = http://www.blogger.com/navbar.g?targetBlogID=8919860543765866292&blogName=Kickin%27+the+Darkness&publishMode=PUBLISH_MODE_HOSTED&navbarType=BLUE&layoutType=LAYOUTS&homepageUrl=http%3A%2F%2Fblog.kickin-the-darkness.com%2F&searchRoot=http%3A%2F%2Fblog.kickin-the-darkness.com%2Fsearch
-.blogger.com/navbar\.g
-# URL = http://editors.dmoz.org/editors/editurl.cgi?url=http%3a//www.example.de/&cat=World/Deutsch/Computer/Hardware/Speichermedien
-.dmoz.org/editors/editurl\.cgi
-# URL = http://offer.ebay.de/ws/eBayISAPI.dll?stockphotourl=http%3A%2F%2Fi16.ebayimg.com%2F02%2Fc%2F02%2F88%2F21%2F5b_6.JPG&MfcISAPICommand=BinConfirm&fb=1&co_partnerid=&item=123456789112&quantity=1&input_bin=
-# URL = http://offer.ebay.de/ws/eBayISAPI.dll?maxbid=15%2C01&MfcISAPICommand=MakeBid&fromPage=284&stockphotourl=http%3A%2F%2Fi14.ebayimg.com%2F02%2Fc%2F00%2Fe9%2Fe1%2F2a_6.JPG&fb=2&co_partnerid=&item=123456789112&input_bid=
-.ebay.de/ws/eBayISAPI\.dll\?
-#MASTER# REMARKS: While this is a redirect, the token isn't part of the URL redirected to.
-# URL = http://www.amazon.com/gp/redirect.html/ref=cm_plog_item_link/105-3659773-0844420?ie=UTF8&location=http%3A%2F%2Fjoltawards.com%2F2007%2F&token=A07736D870C02EF10CB13BCC8A33C302F689BBBA
-.amazon.com/gp/redirect.html/.*location.*&token
-# URL = http://en.groundspring.org/EmailNow/pub.php?module=WebSignup&cmd=thankyou&gotoUrl=http%3A%2F%2Fwww.freebsdfoundation.org&gotoText=Return+to+Home+Page&listNames=The+FreeBSD+Foundation+Mailing+List
-.groundspring.org/
-# URL = http://www1.landsend.de/pp/undefined/images/error.gif?onerr=true&ts=1227969386837&file=http%3A//s7.landsend.com/is-viewers/dhtml/include/sj_textloader.js%3Fver%3Dle.1&line=0&msg=Script%20error.&sid=
-.landsend.de/
-# URL = http://www.youtube.com/swf/l.swf?swf=http%3A//s.ytimg.com/yt/swf/cps-vfl68942.swf&video_id=2cpd6rHIfyA&rel=1&showsearch=1&eurl=&iurl=http%3A//i3.ytimg.com/vi/2cpd6rHIfyA/hqdefault.jpg&sk=5E3I2RCcOLknk1qyI_JgVVnb8FKwgpHzC&use_get_video_info=1&load_modules=1&fs=1&hl=en
-.youtube.com/swf/.*swf=
-
-#----------------------------------------------------------------------------
-# No filtering for sourcecode or other automatically parsed content
-#----------------------------------------------------------------------------
-{-filter -prevent-compression}
-# Sticky Actions = -filter -prevent-compression
-# URL = http://ijbswa.cvs.sourceforge.net/ijbswa/current/
-.cvs.
-/.*(cvs(view|web)|viewcvs)
-#MASTER# REMARKS: The same for Subversion
-# URL = http://svn.sourceforge.net/
-.svn.
-.websvn.
-/(.*/)?svn/
-#MASTER# REMARKS: Jeez, could you please stay with one of them?
-# URL = http://liveupdate.symantec.com/ennlu.x86
-liveupdate.symantec.com
-liveupdate.liveupdatesymantec.com
-liveupdate.symantecliveupdate.com
-# URL = http://www.bookmarklets.com/
-.bookmarklets.com
-# URL = http://www.squarefree.com/bookmarklets/
-.squarefree.com/bookmarklets/
-#MASTER# REMARKS: Used by Mac OSX's automatic software update feature
-swquery.apple.com
-swscan.apple.com
-#MASTER# REMARKS: These are various US DSL speed tests sites, where MIME is wrong
-# URL = http://atl.speakeasy.net/300k
-.speakeasy.net/\d+k
-# URL = http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=185033
-.debian.org
-#MASTER# DONT-VERIFY
-#MASTER# REMARKS: Popular bug-tracking system - likely to contain code
-bugzilla.
-.tldp.org
-#MASTER# REMARKS: mail should not be filtered 09/18/06
-webmail.
-#MASTER# REMARKS: all the world is wikified 09/02/06. Generic wiki un-filterers.
-.wiki*.
-.*wiki.
-/.*wiki/
-#MASTER# REMARKS Actionsfile feedback item #2299717 2008-11-16
-# URL = http://en.wiktionary.org/
-.wiktionary.org/
-#MASTER# REMARKS: protect some google projects from accidental JS/HTML tampering, etc
-maps.google.
-.google.com/(calendar|reader)
-#MASTER# REMARKS: A lot of code and docs on these sites:
-code.
-developer.
-.mozdev.org
-.mozilla.org
-.perl.org
-.cpan.org
-.webdeveloper.com
-.ibm.com/developerworks
-.apache.org/docs
-.comptechdoc.org
-.webmonkey.com
-.webreference.com
-docs.sun.com
-java.sun.com
-.thescripts.com
-.php.net
-.phpdeveloper.org
-.oreillynet.com/pub
-.devshed.com
-.htmlgoodies.com
-.javascript.com
-javascript.internet.com
-.w3schools.com
-.devguru.com
-javascriptkit.com
-.xulplanet.com
-.perl.com/language/newdocs
-.freebsd.org
-.watson.org
-.netbsd.org
-.openbsd.org
-.dragonflybsd.org
-.freedesktop.org
-.gnu.org
-.fedoraproject.org
-.userscripts.org
-#MASTER# REMARKS: Bug trackers like Flyspray and Mailinglist interfaces like Mailman:
-/(.*/)?flyspray/
-/(.*/)?mail(man|archive|inglists?)/
-bugs.
-#MASTER# REMARKS: Actionsfile tracker 1555909 09/17/06, various problems with cpu and logging in.
-quoka.de
-
-#----------------------------------------------------------------------------
-# Innocent images in standard banner sizes found here:
-#----------------------------------------------------------------------------
-{-filter{banners-by-size}}
-# Sticky Actions = -filter{banners-by-size}
-# URL = http://www.pricegrabber.com/search_getprod.php?masterid=580330&zip_code=92840&found=1&ut=40a6c41f2c9d1244
-.pricegrabber.com/search_getprod.php
-#MASTER# REMARKS: URL-based filtering is enough here. 120x90 content images
-# URL = http://www.cnn.com/WORLD/
-.cnn.com
-#MASTER# REMARKS: 120x90 content images
-# URL = http://gamespot.com/gamespot/filters/0,10850,6013054,00.html
-.gamespot.com/gamespot
-#MASTER# PROBLEM-URL: http://www.wral.com/ 10/14/06
-www.wral.com
-#MASTER# PROBLEM-URL: http://www.cartoonnetwork.com/ 10/15/06
-.cartoonnetwork.com/
-# URL = http://www.anybrowser.org/campaign/
-.anybrowser.org
-# URL = http://images.google.de/images?q=cookie+monster&svnum=10&hl=de&lr=&ie=UTF-8&oe=UTF-8&start=40&sa=N
-images.google.
-# URL =  http://www.pbs.org/wgbh/pages/roadshow/series/highlights/2003/albuquerque/index.html
-.pbs.org/.*/roadshow/
-# URL = http://objects.povworld.org/cat/Food/
-objects.povworld.org/cat/
-# URL = http://www.xach.com/gimp/tutorials/tiles.html
-www.xach.com/gimp/
-#MASTER# REMARKS: The destination map at the bottom of the page.
-# URL = http://www.mapquest.com/directions/main.adp?go=1&do=nw&ct=NA&1y=US&1a=255+w+88+st&1p=&1c=&1s=&1z=10024&2y=US&2a=20+milltown+rd&2p=&2c=&2s=&2z=10509&lr=2
-.mapquest.com/directions/
-#MASTER# PROBLEM-URL: http://www.theonion.com/ 10/15/06
-#MASTER# REMARKS: A nasty "premercial" ad is required to enter this site.
-.theonion.com/content/
-# URL = http://www.pattilupone.net/gallery.html
-.pattilupone.net/gallery.html
-# URL = http://www.ambrosiasw.com/games/evn/desktops.html
-.ambrosiasw.com/
-# URL = http://oca.microsoft.com/en/Welcome.asp
-.microsoft.com
-# URL = http://javabog.dk/ijk/
-javabog.dk/ijk/
-#MASTER# REMARK: Per Debian bug report #319025 09/09/06
-.w3.org
-# URL = http://www.encyclopediadramatica.com/New_Zealand_Fail_Guy
-.encyclopediadramatica.com/
-# URL = http://www.ikea.com/us/en/catalog/products/00103102
-.ikea.com/
-# URL = http://www.froscon.de/en/projects.html
-.froscon.de/
-# URL = http://www.fsfe.org/en/supporters
-.fsfe.org/
-# URL = http://www.couchsurfing.com/mapsurf.html
-.couchsurfing.com/
-
-{-filter{banners-by-link}}
-# Sticky Actions = -filter{banners-by-link}
-# URL = http://www.encyclopediadramatica.com/Advertisement
-.encyclopediadramatica.com/
-
-#----------------------------------------------------------------------------
-# These don't work without the referrer information:
-#----------------------------------------------------------------------------
-{-hide-referrer}
-# Sticky Actions = -hide-referrer
-#MASTER# REMARKS: This section NOT checked 10/18/06 HB
-#MASTER# REMARKS: These are movie clips, linked from http://us.imdb.com
-.totaleclips.com
-#MASTER# REMARKS: Link to download page breaks
-# URL = http://www.mandrakelinux.com/en/ftp.php3
-.mandrakelinux.com/en/ftp.php3
-#MASTER# REMARKS: Actions Tracker 1313157
-# URL = http://validator.w3.org/check?uri=referer
-validator.w3.org/check\?uri=referer
-#MASTER# REMARKS: Fixes Debian Bug #250407
-# URL = http://www.petitiononline.com/mod_perl/signed.cgi
-.petitiononline.com/mod_perl/signed.cgi
-#MASTER# REMARKS: Tracker bug report 1107806 09/26/06
-.telia.se
-#MASTER# REMARKS: XML validator that actually works.
-# URL = schneegans.de/sv/?url=referer
-schneegans.de/sv/\?url=referer
-
-#----------------------------------------------------------------------------
-# These animated gifs are either useful or nice:
-#----------------------------------------------------------------------------
-{-deanimate-gifs}
-# Sticky Actions = -deanimate-gifs
-#MASTER# REMARKS: Wanted animations on ecards
-#MASTER# REMARKS: Leaving 10/18/06 though most animated seem flash now.
-# URL = http://www.care2.com/
-.care2.com
-.care-mail.com
-#MASTER# PROBLEM-URL: http://weather.chicagotribune.com/radar/station.asp?ID=LOT19&type=loop
-#MASTER# REMARKS: These are weather radar images. 10/18/06
-# URL = http://www.wunderground.com/radar/station.asp?ID=MPX19&type=loop&clutter=1
-.wunderground.com
-66.28.250.180/data/
-#MASTER# PROBLEM-URL: http://www.teamquest.com/html/gunther/laquiz.shtml
-.teamquest.com/gifs/gunther/
-#MASTER# REMARKS: 09/12/06 Art site, and ad-free
-.rubberslug.com
-#MASTER# REMARKS: Actionsfile feedback item #2040467, allow animated gifs from wikipedia.org
-.wikipedia.org/
-
-#----------------------------------------------------------------------------
-# The "site-specifics" filter has special cures for problems found here:
-#----------------------------------------------------------------------------
-#MASTER# REMARKS: This section NOT checked 10/15/06 HB.
-{+filter{site-specifics}}
-# Sticky Actions = +filter{site-specifics}
-# URL = http://www.spiegel.de/static/js/flash-plugin.js
-.spiegel.de/static/js/flash-plugin\.js
-# URL = http://www.quelle-bausparkasse.de/
-.quelle-bausparkasse.de/$
-# URL = http://de.groups.yahoo.com/group/die-spinner/interrupt?st=2&ln=die-spinner&m=1&done=%2Fgroup%2Fdie-spinner%2Fmessage%2F416
-.groups.yahoo.com/group/
-# URL = http://www.nytimes.com/
-.nytimes.com/
-
-#----------------------------------------------------------------------------
-# Content under these TLDs is most probably in character sets which the
-# demoronizer filter would mess up
-#----------------------------------------------------------------------------
-{-filter{demoronizer}}
-.jp
-.cn
-.tw
-.ru
-.kr
-
-#----------------------------------------------------------------------------
-# Misc special rules:
-#----------------------------------------------------------------------------
-{-filter{content-cookies} -filter{webbugs}}
-# Sticky Actions = -filter{content-cookies} -filter{webbugs}
-#MASTER# REMARKS: Needs content-cookies for cookie test on index page; needs webbugs for storing profile(!)
-# URL = http://www.friendscout24.de/
-.friendscout24.de
-#MASTER# REMARKS: Explains how content cookies work
-# URL = http://www.webreference.com/js/column8/property.html
-.webreference.com/js/column8/property.html
-
-{-filter{fun}}
-# Sticky Actions = -filter{fun}
-#MASTER# REMARKS: Don't change the filter code with itself ;-)
-# URL = http://www.privoxy.org/user-manual/filter-file.html
-/(.*/)?user-manual/filter-file.html
-
-#{+filter{img-reorder} +filter{banners-by-link}}
-#MASTER# REMARKS: Temporarily decommissioning 10/15/06. Violates Cautious no filter policy. HB
-#MASTER# PROBLEM-URL: http://www.dn.se/
-#MASTER# REMARKS: Can't catch by size or location
-#www.dn.se
-
-{-filter{img-reorder}}
-# Sticky Actions = -filter{img-reorder}
-#MASTER# REMARKS: Google images don't show up with img-reorder on
-#MASTER# REMARKS: Also images on finance.google.com 09/25/06
-# URL = http://images.google.com
-.google.
-#MASTER# PROBLEM-URL: http://wired.com 09/23/06
-# URL = http://wired.com
-/.*wired(\.com)?/
-.wired.com/
-
-{-filter{js-annoyances}}
-# Sticky Actions = -filter{js-annoyances}
-#MASTER# REMARKS: No progress past main page without js-annoyances
-# URL = http://www.nasa.gov
-.nasa.gov
-#MASTER# REMARKS: Exclude per Debian bug report #377843
-# URL = http://www2.cnrs.fr/presse/communique/900.htm
-.cnrs.fr
-#MASTER# REMARKS: Exclude per Debian bug report #377843
-# URL = http://blogs.msdn.com/wga/archive/2006/07/16/667063.aspx
-blogs.msdn.com
-
-{-filter{unsolicited-popups}}
-# Sticky Actions = -filter{unsolicited-popups}
-#MASTER# REMARKS: Breaks Movable Type's admin interface (http://www.movabletype.org/)
-/.*mt.cgi$
-#MASTER# REMARKS: Exclude per Debian bug report #377843 09/17/06
-# URL = http://www2.cnrs.fr/presse/communique/900.htm
-.cnrs.fr
-#MASTER# REMARKS: Exclude per Debian bug report #377843 09/17/06
-# URL = http://blogs.msdn.com/wga/archive/2006/07/16/667063.aspx
-blogs.msdn.com
-
-{+fast-redirects{check-decoded-url} -block}
-# Sticky Actions = +fast-redirects{check-decoded-url} -block
-#MASTER# REMARKS: Yahoo search results. Added 2007-01-19 fk
-#MASTER# REDIRECT-REFERRER: http://search.yahoo.com/search?p=privoxy
-# URL = http://rds.yahoo.com/_ylt=A0geuryczbBF._YAEmxXNyoA;_ylu=X3oDMTB2b2gzdDdtBGNvbG8DZQRsA1dTMQRwb3MDMQRzZWMDc3IEdnRpZAM-/SIG=11b3qg40n/EXP=1169301276/**http%3a//www.privoxy.org/
-rds.yahoo.com/
-#MASTER# COMMENTS: Verified 2007-01-19 fk
-#MASTER# REDIRECT-REFERRER: http://www.gamefaqs.com/computer/doswin/game/914819.html
-# URL = http://dw.com.com/redir?asid=0&astid=8&siteid=19&edid=107&destCat=33862&destURL=http%3A%2F%2Fdb.gamefaqs.com%2Fcomputer%2Fdoswin%2Ffile%2Fvampire_tmb_b.txt
-dw.com.com/
-#MASTER# REMARKS: Action tracker 1593393. Added 2007-01-20.
-# URL = http://wzus.bloglines.com/r?t=a&d=us&s=bl&c=blen&ti=1&ai=51060&l=dir&o=0&sv=z6f537f5b&ip=971AC44B&u=http%3A%2F%2Fwww.skweezer.net%2Fbloglines%2Fskweeze.aspx%3F%26i%3Dd%26l%3Den%26r%3Dhttp%253A%252F%252Fwww.bloglines.com%252Fmyblogs_display%253Fsub%253D29302699%2526site%253D5382440%26url%3Dhttp%253A%252F%252Fpermalink.gmane.org%252Fgmane.linux.debian.devel.changes.unstable%252F97340
-.bloglines.com/r\?
-www.skweezer.net/bloglines
-# URL = http://media.fastclick.net/w/get.media?sid=4681&m=5&tp=6&url=http%3A//www.sciam.com/article.cfm%3FchanID%3Dsa003%26articleID%3DC7C87ECC-E7F2-99DF-39AEFF3D7D1A8CFB%26ref%3Drss
-.fastclick.net/w/get\.media\?
-
-{+block{Looks like an anti-leech trigger URL.}}
-#MASTER# COMMENTS: This section not checked 10/17/06 HB. Still out there?
-#MASTER# PROBLEM-URL: http://www.anti-leech.com/theft_example.html
-#MASTER# REMARKS: Lame attempt at banning ad-blockers. Used by other websites as well.
-/antitheft\.php
-
-{ +prevent-compression }
-.compusa.com/
-
-{+filter{tiny-textforms}}
-.sourceforge.net/tracker
-
-{+downgrade-http-version}
-#MASTER# COMMENTS: This section not checked 10/17/06 HB
-#MASTER# REMARKS: This is work-around for CUPS http configuration.
-:631
-
-#MASTER# REMARKS: If Privoxy is disabled, requests for config.privoxy.org/
-#MASTER# REMARKS: reach privoxy.org and are redirected to privoxy.org/config.
-#MASTER# REMARKS: The instructions tell the user to reload the page with
-#MASTER# REMARKS: Privoxy enabled to reach the configuration webinterface,
-#MASTER# REMARKS: to make this work we have to intercept the request and revert
-#MASTER# REMARKS: the redirection.
-{+redirect{http://config.privoxy.org/}}
-# Sticky Actions = +redirect{http://config.privoxy.org/}
-# URL = http://www.privoxy.org/config
-.privoxy.org/config
-
-#MASTER# REMARKS: Privoxy's "unsafe" CGI pages check the referrer
-#MASTER# REMARKS: to make sure the user reached them intentionally.
-#MASTER# REMARKS: Disabling hide-referrer so there's a referrer left to check.
-#MASTER# REMARKS: Disabling fast-redirects because if CGI crunching gets
-#MASTER# REMARKS: enabled it could be leveraged to fool the referrer check.
-{-hide-referrer -fast-redirects}
-# Sticky Actions = -hide-referrer -fast-redirects
-# URL = http://p.p
-# URL = http://config.privoxy.org
-p.p/
-config.privoxy.org/
-
-#MASTER# REMARKS: Yahoo logout URLs need special treatment,
-#MASTER# REMARKS: the URL after "done=" is no fast-redirect. 2007-01-19 fk
-#MASTER# REMARKS: Reported in support request #1635354.
-{-fast-redirects +redirect{s@^.*\*(http://login\.yahoo\.com/.*)$@$1@i}}
-# XXX: Privoxy-Regression-Test currently doesn't allow backslashes.
-# Sticky Actions = -fast-redirects +redirect
-# URL = http://us.ard.yahoo.com/SIG=AAAAAAAAA/M=NNNNNN.NNNNNNN.NNNNNNN.NNNNNNN/D=mail/S=NNNNNNNNN:HEADR/Y=YAHOO/EXP=NNNNNNNNNN/A=NNNNNNN/R=N/SIG=AAAAAAAAA/*http://login.yahoo.com/config/login?logout=1&.done=http://mail.yahoo.com&.src=ym&.intl=us
-.yahoo./.*http://login.yahoo.com/config/login.*http://
-
-#----------------------------------------------------------------------------
-# Sections that modify the action settings based on tags.
-#----------------------------------------------------------------------------
-
-#############################################################################
-# Depends on +client-header-tagger{image-requests}
-#############################################################################
-{-handle-as-empty-document \
- +handle-as-image \
-}
-TAG:^IMAGE-REQUEST$
-
-#############################################################################
-# Depends on +client-header-tagger{css-requests}
-#############################################################################
-{+handle-as-empty-document \
- -handle-as-image \
-}
-TAG:^CSS-REQUEST$
-
-#MASTER# set vi:nowrap
diff --git a/external/privoxy/default.filter b/external/privoxy/default.filter
deleted file mode 100644
index 3537c7b..0000000
--- a/external/privoxy/default.filter
+++ /dev/null
@@ -1,1289 +0,0 @@
-# ********************************************************************
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/default.filter,v $
-# 
-#  $Id: default.filter,v 1.71 2009/03/01 18:33:17 ler762 Exp $
-#
-#  Purpose     :  Rules to process the content of web pages
-# 
-#  Copyright   :  Written by and Copyright (C) 2001-2009 the
-#                 Privoxy team. http://www.privoxy.org/
-#
-# We value your feedback. However, to provide you with the best support,
-# please note:
-#  
-#  * Use the support forum to get help:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=211118
-#  * Submit bugs only thru our bug forum:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=111118 
-#    Make sure that the bug has not already been submitted. Please try
-#    to verify that it is a Privoxy bug, and not a browser or site
-#    bug first. If you are using your own custom configuration, please
-#    try the stock configs to see if the problem is a configuration
-#    related bug. And if not using the latest development snapshot,
-#    please try the latest one. Or even better, CVS sources.
-#  * Submit feature requests only thru our feature request forum:
-#    http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse
-#      
-# For any other issues, feel free to use the mailing lists:
-# http://sourceforge.net/mail/?group_id=11118
-#    
-# Anyone interested in actively participating in development and related
-# discussions can join the appropriate mailing list here:
-# http://sourceforge.net/mail/?group_id=11118. Archives are available
-# here too.
-# 
-#################################################################################
-#
-# Syntax:
-#
-# Generally filters start with a line like "FILTER: name description".
-# They are then referrable from the actionsfile with +filter{name}
-#
-# FILTER marks a filter as content filter, other filter
-# types are CLIENT-HEADER-FILTER, CLIENT-HEADER-TAGGER,
-# SERVER-HEADER-FILTER and SERVER-HEADER-TAGGER.
-#
-# Inside the filters, write one Perl-Style substitution (job) per line.
-# Jobs that precede the first FILTER: line are ignored.
-#
-# For Details see the pcrs manpage contained in this distribution.
-# (and the perlre, perlop and pcre manpages)
-#
-# Note that you are free to choose the delimiter as you see fit.
-#
-# Note2: In addition to the Perl options gimsx, the following nonstandard
-# options are supported:
-# 
-# 'U' turns the default to ungreedy matching.  Add ? to quantifiers to
-#     switch back to greedy.
-#
-# 'T' (trivial) prevents parsing for backreferences in the substitute.
-#     Use if you want to include text like '$&' in your substitute without
-#     quoting.
-#
-# 'D' (Dynamic) allows the use of variables. Supported variables are:
-#     $host, $origin (the IP address the request came from), $path and $url.
-#
-#     Note that '$' is a bad choice as delimiter for dynamic filters as you
-#     might end up with unintended variables if you use a variable name
-#     directly after the delimiter. Variables will be resolved without
-#     escaping anything, therefore you also have to be careful not to chose
-#     delimiters that appear in the replacement text. For example '<' should
-#     be save, while '?' will sooner or later cause conflicts with $url.
-# 
-#################################################################################
-
-
-#################################################################################
-#
-# js-annoyances: Get rid of particularly annoying JavaScript abuse.
-#
-#################################################################################
-FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse.
-
-# Note: Most of these jobs would be safer if restricted to a
-# <script> context as in:
-#
-# s/(<script.*)nasty-item(?=.*<\/script>)/$1replacement/sigU
-#
-# but that would make them match only the first occurrence of
-# nasty-item in each <script>. We need nestable jobs!
-
-# Get rid of Javascript referrer tracking. 
-# Test page: http://www.javascript-page.com/referrer.html
-#
-s|(?:\w+\.)+referrer|"Not Your Business!"|gisU
-
-# The status bar is for displaying link targets, not pointless blahblah
-#
-s@([\W]\s*)((?:this|window)\.(?:default)?status)\s*=\s*((['"]).*?\4)@$1$2 =\
- (typeof(this.href) != 'undefined')?($3 + ' URL: ' + this.href):($2)@ig
-
-s/(?:(?:this|window)\.(?:default)?status)\s*=\s*\w*\s*;//ig
-
-# Kill OnUnload popups. Yummy.
-# Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html
-#
-s/(<body\s+[^>]*)onunload/$1never/siU
-s|(<script.*)window\.onunload(?=.*</script>)|$1never|sigU
-
-# If we allow window.open, we want normal window features: 
-# Test: http://www.htmlgoodies.com/beyond/notitle.html
-#
-s/(open\s*\([^\)]+resizable=)(["']?)(?:no|0)\2/$1$2yes$2/sigU
-s/(open\s*\([^\)]+location=)(["']?)(?:no|0)\2/$1$2yes$2/sigU 
-s/(open\s*\([^\)]+status=)(["']?)(?:no|0)\2/$1$2yes$2/sigU 
-s/(open\s*\([^\)]+scroll(?:ing|bars)=)(["']?)(?:no|0)\2/$1$2auto$2/sigU 
-s/(open\s*\([^\)]+menubar=)(["']?)(?:no|0)\2/$1$2yes$2/sigU 
-s/(open\s*\([^\)]+toolbar=)(["']?)(?:no|0)\2/$1$2yes$2/sigU 
-s/(open\s*\([^\)]+directories=)(["']?)(?:no|0)\2/$1$2yes$2/sigU 
-s/(open\s*\([^\)]+fullscreen=)(["']?)(?:yes|1)\2/$1$2no$2/sigU
-s/(open\s*\([^\)]+always(?:raised|lowered)=)(["']?)(?:yes|1)\2/$1$2no$2/sigU
-s/(open\s*\([^\)]+z-?lock=)(["']?)(?:yes|1)\2/$1$2no$2/sigU
-s/(open\s*\([^\)]+hotkeys=)(["']?)(?:yes|1)\2/$1$2no$2/sigU
-s/(open\s*\([^\)]+titlebar=)(["']?)(?:no|0)\2/$1$2yes$2/sigU
-s/(open\s*\([^\)]+always(?:raised|lowered)=)(["']?)(?:yes|1)\2/$1$2no$2/sigU
-
-
-#################################################################################
-#
-# js-events: Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).
-#
-#################################################################################
-FILTER: js-events Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).
-
-s/(on|event\.)((mouse(over|out|down|up|move))|(un)?load|contextmenu|selectstart)/never/ig
-# Not events, but abused on the same type of sites:
-s/(alert|confirm)\s*\(/concat(/ig
-s/settimeout\(/concat(/ig
-
-#################################################################################
-#
-# html-annoyances: Get rid of particularly annoying HTML abuse.
-#
-#################################################################################
-FILTER: html-annoyances Get rid of particularly annoying HTML abuse.
-
-# New browser windows (if allowed -- see no-popups filter below) should be
-# resizeable and have a location and status bar
-#
-s/(<a\s+href[^>]+resizable=)(['"]?)(?:no|0)\2/$1$2yes$2/igU 
-s/(<a\s+href[^>]+location=)(['"]?)(?:no|0)\2/$1$2yes$2/igU 
-s/(<a\s+href[^>]+status=)(['"]?)(?:no|0)\2/$1$2yes1$2/igU
-s/(<a\s+href[^>]+scrolling=)(['"]?)(?:no|0)\2/$1$2auto$2/igU
-s/(<a\s+href[^>]+menubar=)(['"]?)(?:no|0)\2/$1$2yes$2/igU
-
-# The <BLINK> and <MARQUEE> tags were crimes!
-#
-s-</?(blink|marquee).*>--sigU
-
-
-#################################################################################
-#
-# content-cookies: Kill cookies that come in the HTML or JS content.
-#
-#################################################################################
-FILTER: content-cookies Kill cookies that come in the HTML or JS content.
-
-# JS cookies, except those used by antiadbuster.com to detect us:
-#
-s|(\w+\.)+cookie(?=[ \t\r\n]*=)(?!='aab)|ZappedCookie|ig
-
-# HTML cookies:
-#
-s|<meta\s+http-equiv=['"]?set-cookie.*>|<!-- ZappedCookie -->|igU
-
-
-#################################################################################
-#
-# refresh-tags: Kill automatic refresh tags (for dial-on-demand setups).
-#
-#################################################################################
-FILTER: refresh-tags Kill automatic refresh tags (for dial-on-demand setups).
-
-# Note: Only deactivates refreshes with more than 9 seconds delay to
-#       preserve monster-stupid but common redirections via meta tags.
-#
-s/<meta\s+http-equiv\s*=\s*(['"]?)refresh\1\s+content\s*=\s*(['"]?)\d{2,}\s*(;\s*url\s*=\s*([^>\2]*))?\2/<link rev="x-refresh" href="$4"/iU
-
-
-#################################################################################
-#
-# unsolicited-popups: Disable unsolicited pop-up windows.
-#
-#################################################################################
-FILTER: unsolicited-popups Disable only unsolicited pop-up windows.
-
-s+([^'"]\s*<head.*>)(?=\s*[^'"])+$1<script>function PrivoxyWindowOpen(){return(null);}</script>+isU
-s@([^\w\s.]\s*)((?:map)?(window|this|parent)\.?)?open\s*\(@$1PrivoxyWindowOpen(@ig
-s+([^'"]\s*</html>)(?!\s*(\\n|'|"))+$1<script>function PrivoxyWindowOpen(a, b, c){return(window.open(a, b, c));}</script>+iU     
-
-
-##################################################################################
-#
-# all-popups: Kill all popups in JavaScript and HTML.
-#
-#################################################################################
-FILTER: all-popups Kill all popups in JavaScript and HTML.
-
-s@((\W\s*)(?:map)?(window|this|parent)\.?)open\s*\\?\(@$1concat(@ig  # JavaScript
-#s/\starget\s*=\s*(['"]?)_?(blank|new)\1?/ notarget/ig        # HTML
-s/\starget\s*=\s*(['"]?)_?(blank|new)\1?/ /ig        # (X)HTML
-
-##################################################################################
-#
-# img-reorder: Reorder attributes in <img> tags to make the banners-by-* filters more effective.
-#
-#################################################################################
-FILTER: img-reorder Reorder attributes in <img> tags to make the banners-by-* filters more effective.
-
-# In the first step src is moved to the start, then width is moved to the second
-# place to guarantee an order of src, width, height. Also does some white-space
-# normalization.
-#
-# This makes banners-by-size more effective and allows both banners-by-size
-# and banners-by-link to preserve the original image URL in the title attribute.
-
-s|<img\s+?([^>]*)\ssrc\s*=\s*(['"])([^>\\\2]+)\2|<img src=$2$3$2 $1|siUg
-s|<img\s+?([^>]*)\ssrc\s*=\s*([^'">\\\s]+)|<img src=$2 $1|sig
-s|(<img[^>]+height)\s*=\s*|$1=|sig
-
-s|<img (src=(?:(['"])[^>\\\\2]*\2\|[^'">\\\s]+?))([^>]*)\s+width\s*=\s*((["']?)\d+?\5)(?=[\s>])|<img $1 width=$4$3|siUg
-
-
-#################################################################################
-#
-# banners-by-size: Kill banners by size.
-#
-#################################################################################
-#
-# Standard banner sizes taken from http://www.iab.net/iab_banner_standards/bannersizes.html
-#
-# Note: Use http://config.privoxy.org/send-banner?type=trans for a transparent 1x1 image
-#       Use http://config.privoxy.org/send-banner?type=pattern for a grey/white pattern image
-#       Use http://config.privoxy.org/send-banner?type=auto  to auto-select.
-#
-# Note2: Use img-reorder before this filter to ensure maximum matching success
-#
-#################################################################################
-FILTER: banners-by-size Kill banners by size.
-
-# 88*31
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)88\4)[^>]*?(height=(['"]?)31\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 120*60, 120*90, 120*240, 120*600
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)120\4)[^>]*?(height=(['"]?)(?:600?|90|240)\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 125*125
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)125\4)[^>]*?(height=(['"]?)125\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 160*600
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)160\4)[^>]*?(height=(['"]?)600\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 180*150
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)180\4)[^>]*?(height=(['"]?)150\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 234*60, 468*60 (Most Banners!)
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)(?:234|468)\4)[^>]*?(height=(['"]?)60\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 240*400
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)240\4)[^>]*?(height=(['"]?)400\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 250*250, 300*250
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)(?:250|300)\4)[^>]*?(height=(['"]?)250\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-# 336*280
-s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)336\4)[^>]*?(height=(['"]?)280\6)[^>]*?(?=/?>)@\
-  <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-
-# Note: 200*50 was also proposed, but it probably causes too much collateral damage:
-#
-#s@<img\s+(?:src\s*=\s*(['"]?)([^>\\\1\s]+)\1)?[^>]*?(width=(['"]?)200\4)[^>]*?(height=(['"]?)50\6)[^>]*?(?=/?>)@\
-#   <img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed-$2-by-size" $3 $5@sig
-
-
-#################################################################################
-#
-# banners-by-link: Kill banners by their links to known clicktrackers (Experimental).
-#
-#################################################################################
-FILTER: banners-by-link Kill banners by their links to known clicktrackers.
-
-# Common case with width and height attributes:
-#
-s@<a\s+href\s*=\s*(['"]?)([^>\1\s]*?(?:\
-  adclick                             # See www.dn.se \
-| advert                              # see dict.leo.org \
-| atwola\.com/(?:link|redir)          # see www.cnn.com \
-| doubleclick\.net/jump/              # redirs for doublecklick.net ads \
-| counter                             # common \
-| (?<!&type=)tracker                  # (&type=tracker is used in sf's project statistics) \
-| adlog\.pl                           # see sf.net \
-)[^>\1\s]*)\1[^>]*>\s*<img\s+(?:src\s*=\s*(['"]?)([^>\\\3\s]+)\3)?[^>]*((?:width|height)\s*=\s*(['"]?)\d+?\6)[^>]*((?:width|height)\s*=\s*(['"]?)\d+?\8)[^>]*?(?=/?>)\
-@<img $5 $7 src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed $4 by link to $2"@sigx
-
-# Rare case w/o explicit dimensions:
-#
-s@<a\s+href\s*=\s*(['"]?)([^>\1\s]*?(?:ad(?:click|vert)|atwola\.com/(?:link|redir)|doubleclick\.net/jump/|(?<!&type=)tracker|counter|adlog\.pl)[^>\1\s]*)\1[^>]*>\s*<img\s+(?:src\s*=\s*(['"]?)([^>\\\3\s]+)\3)?[^>]*?(?=/?>)@<img src="http://config.privoxy.org/send-banner?type=auto"; border="0" title="Killed $4 by link to $2"@sig
-
-
-################################################################################
-#
-# webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking).
-#
-#################################################################################
-FILTER: webbugs Squish WebBugs (1x1 invisible GIFs used for user tracking).
-
-s@<img[^>]*\s(?:width|height)\s*=\s*['"]?[01](?=\D)[^>]*\s(?:width|height)\s*=\s*['"]?[01](?=\D)[^>]*?>@@siUg
-
-
-#################################################################################
-#
-# tiny-textforms: Extend those tiny textareas up to 40x80 and kill the hard wrap.
-#
-#################################################################################
-FILTER: tiny-textforms Extend those tiny textareas up to 40x80 and kill the hard wrap.
-
-s/(<textarea[^>]*?)(?:\s*(?:rows|cols)=(['"]?)\d+\2)+/$1 rows=$2\40$2 cols=$2\80$2/ig 
-s/(<textarea[^>]*?)wrap=(['"]?)hard\2/$1/ig
-
-
-#################################################################################
-#
-# jumping-windows: Prevent windows from resizing and moving themselves.
-#
-#################################################################################
-FILTER: jumping-windows Prevent windows from resizing and moving themselves.
-
-s/(?<=[\W])(?:window|this|self)\.(?:move|resize)(?:to|by)\(/''.concat(/ig
-
-#################################################################################
-#
-# frameset-borders: Give frames a border, make them resizable and scrollable.
-#
-#################################################################################
-FILTER: frameset-borders Give frames a border and make them resizable.
-
-s/(<frameset\s+[^>]*)framespacing=(['"]?)(no|0)\2/$1/igU
-s/(<frameset\s+[^>]*)frameborder=(['"]?)(no|0)\2/$1/igU
-s/(<frameset\s+[^>]*)border=(['"]?)(no|0)\2/$1/igU
-s/(<frame\s+[^>]*)noresize/$1/igU
-s/(<frame\s+[^>]*)frameborder=(['"]?)(no|0)\2/$1/igU 
-s/(<frame\s+[^>]*)scrolling=(['"]?)(no|0)\2/$1/igU
-
-
-
-#################################################################################
-#
-# demoronizer: Correct Microsoft's abuse of standardized character sets, which 
-#              leave the browser to (mis)-interpret unknown characters, with 
-#              sometimes bizarre results on non-MS platforms.
-#
-# credit: ripped from the demoroniser.pl script by: 
-#         John Walker -- January 1998, http://www.fourmilab.ch/webtools/demoroniser
-#
-#################################################################################
-FILTER: demoronizer Fix MS's non-standard use of standard charsets.
-
-s/(&\#[0-2]\d\d)\s/$1; /g
-# per Robert Lynch: http://slate.msn.com//?id=2067547, just a guess.
-# Must come before x94 below.
-s/\xE2\x80\x94/ -- /g
-s/\x82/,/g
-#s-\x83-<em>f</em>-g
-s/\x84/,,/g
-s/\x85/.../g
-#s/\x88/^/g
-#s-\x89- °/°°-g
-s/\x8B/</g
-s/\x8C/Oe/g
-s/\x91/`/g
-s/\x92/'/g
-s/(\x93|\x94)/"/g
-# Bullet type character.
-s/\x95/&middot;/g
-s/\x96/-/g
-s/\x97/--/g
-#s-\x98-<sup>~</sup>-g
-#s-\x99-<sup>TM</sup>-g
-# per Robert Lynch.
-s/\x9B/>/g                  # 155
-
-
-#################################################################################
-#
-# shockwave-flash: Kill embedded Shockwave Flash objects.
-#                  Note: Better just block "/.*\.swf$"!
-#
-#################################################################################
-FILTER: shockwave-flash Kill embedded Shockwave Flash objects.
-
-s|<object [^>]*macromedia.*</object>|<!-- Squished Shockwave Object -->|sigU
-s|<embed [^>]*(application/x-shockwave-flash\|\.swf).*>(.*</embed>)?|<!-- Squished Shockwave Flash Embed -->|sigU
-
-
-#################################################################################
-#
-# quicktime-kioskmode: Make Quicktime movies saveable.
-#
-#################################################################################
-FILTER: quicktime-kioskmode Make Quicktime movies saveable.
-
-s/(<embed\s+[^>]*)kioskmode\s*=\s*(["']?)true\2/$1/ig 
-
-
-#################################################################################
-#
-# fun: Text replacements for subversive browsing fun!
-#
-#################################################################################
-FILTER: fun Text replacements for subversive browsing fun!
-
-# SCNR
-#
-s/microsoft(?!.[^\s])/MicroSuck/ig
-
-# Buzzword Bingo (example for extended regex syntax)
-#
-s* (?:industry|world)[ -]leading \
-|  cutting[ -]edge \
-|  customer[ -]focused \
-|  market[ -]driven \
-|  award[ -]winning # Comments are OK, too! \
-|  high[ -]performance \
-|  solutions[ -]based \
-|  unmatched \
-|  unparalleled \
-|  unrivalled \
-*$0<sup><font color="red"><b>Bingo!</b></font></sup> \
-*igx
-
-# For Germans only
-#
-s/(M|m)edien(?![^<]*>)/$1&auml;dchen/Ug
-
-#################################################################################
-#
-# crude-parental: Crude parental filtering. Use with a suitable blocklist.
-#                 Pages are "blocked" based on keyword matching.
-#
-#################################################################################
-FILTER: crude-parental Crude parental filtering. Note that this filter doesn't work reliably.
-
-# (Note: Middlesex, Sussex and Essex are counties in the UK, not rude words)
-# (Note #2: Is 'sex' a rude word?!)
-
-s%^.*(?<!middle)(?<!sus)(?<!es)sex.*$%<html><head><title>Blocked</title></head><body>\
-<h3>Blocked by Privoxy's crude-parental filter due to possible adult content.</h3></body></html>%is
-
-s+^.*warez.*$+<html><head><title>No Warez</title></head><body><h3>You're not searching for illegal stuff, are you?</h3></body></html>+is
-
-# Remove by description
-s/^.*\
-(?:(suck|lick|tongue|rub|fuck|fingering|finger|chicks?)\s*)?\
-(?:(her|your|my|hard|with|big|wet|tight|pink|hot|moist|young|teen)\s*)+\
-(dicks?|penis|cocks?|balls?|tits?|pussy|cunt|clit|ass|mouth).*$\
-/This page has been blocked by Privoxy's crude-parental content filter\
-/is
-
-#Remove by link text
-s/^.*\
-(download|broadband|view|watch|free|get|extreem)?\s*\
-(sex|xxx|porn|cumshot|fuck(ing|s)?|anal|ass|asian|adult|Amateur|org(y|ies)|close ups?|hand?job|nail(ed)?)+\s*\
-(movies?|pics?|videos?|dvds?|dvd's|links?).*$\
-/This page has been blocked by Privoxy's crude-parental content filter\
-/is
-
-#Remove by age disclaimer
-s/^.*\
-(models?|chicks?|girls?|women|persons)\s*\
-(who|are|were)+ (over|at least) (16|18|21) years (old|of age).*$\
-/This page has been blocked by Privoxy's crude-parental content filter\
-/is
-
-#Remove by regulations
-s/^.*(Section 2257|18 U.?S.?C.? 2257).*$\
-/This page has been blocked by Privoxy's crude-parental content filter\
-/is 
-
-
-#################################################################################
-#
-# IE-Exploits: Disable some known Internet Explorer bug exploits.
-#
-#################################################################################
-FILTER: ie-exploits Disable some known Internet Explorer bug exploits.
-
-# Note: This is basically a demo and waits for someone more interested in IE
-# security (sic!) to take over.
-
-# Cross-site-scripting:
-#
-s%f\("javascript:location.replace\('mk:@MSITStore:C:'\)"\);%alert\("This page looks like it tries to use a vulnerability described here:\n http://online.securityfocus.com/archive/1/298748/2002-11-02/2002-11-08/2"\);%siU
-
-# Address bar spoofing (http://www.secunia.com/advisories/10395/):
-#
-s/(<a[^>]*href[^>]*)(?:\x01|\x02|\x03|%0[012])@/$1MALICIOUS-LINK@/ig
-
-# Nimda:
-#
-s%<script language="JavaScript">(window\.open|1;''\.concat)\("readme\.eml", null, "resizable=no,top=6000,left=6000"\)</script>%<br><font size="7"> WARNING: This Server is infected with <a href="http://www.cert.org/advisories/CA-2001-26.html";>Nimda</a>!</font>%g
-
-
-#################################################################################
-#
-#
-# site-specifics: Cure for site-specific problems. Don't apply generally!
-#
-#   Note: The fixes contained here are so specific to the problems of the
-#         particular web sites they are designed for that they would be a
-#         waste of CPU cycles (or even destructive!) on 99.9% of the web
-#         sites where they don't apply.
-#
-#################################################################################
-FILTER: site-specifics Cure for site-specific problems. Don't apply generally!
-
-# www.spiegel.de excludes X11 users from viewing Flash5 objects - shame.
-# Apply to: www.spiegel.de/static/js/flash-plugin.js 
-#
-s/indexOf\("x11"\)/indexOf("x13")/
-
-# www.quelle-bausparkasse.de uses a very stupid redirect mechanism that
-# relies on a webbug being present. Can we tolerate that? No!
-# Apply to: www.quelle-bausparkasse.de/$
-#
-s/mylogfunc()//g
-
-# groups.yahoo.com has splash pages that one needs to click through in
-# order to access the actual messages. Let the browser do that. Thanks
-# to Paul Jobson for this one:
-#
-s|<a href="(.+?)">(?:Continue to message\|Weiter zu Nachricht)</a>|<meta http-equiv="refresh" content="0; URL=$1">|ig
-
-# monster.com has two very similar gimmicks:
-#
-s|<input type="hidden" name="REDIRECT" value="(.+?)">|<meta http-equiv="refresh" content="0; URL=$1">|i
- 
-s|<IMG SRC="http://media.monster.com/mm/usen/my/no_thanks_211x40.gif".+?>|<meta http-equiv="refresh" content="0; URL=http://my.monster.com/resume.asp";>|i 
-
-# nytimes.com triggers popups through the onload handler of dummy images
-# to fool popup-blockers.  
-#
-s|(<img [^>]*)onload|$1never|sig
-
-# Pre-check all the "Discard" buttons in GNU Mailman's web interface.
-# (This saves a lot of mouse aiming practice when flushing spamtraps)
-#
-s|(<INPUT name="\d{2,4}" type="RADIO" value="0") CHECKED |$1|g
-s|<INPUT name="\d{2,4}" type="RADIO" value="3" |$0 checked|g
-
-#################################################################################
-#
-# no-ping: Removes non-standard ping attributes in <a> and <area> tags.
-#          
-#################################################################################
-FILTER: no-ping Removes non-standard ping attributes in <a> and <area> tags.
-s@(<a(?:rea)?[^>]*?)\sping=(['"]?)([^"'>]+)\2([>\s]?)@\
-<strong style="color:white; background-color:red;" title="Privoxy removed ping target '$3'">PING!</strong>\n$1$4@ig
-
-#################################################################################
-#
-# google: CSS-based block for Google text ads. Also removes
-#         a width limitation and the toolbar advertisement.
-#
-#################################################################################
-FILTER: google CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.
-
-s@</head>@<style type="text/css">\n\
- /* Style sheet inserted by Privoxy's google filter. */\n\
- \#fbc, \#fbl, \#ra, .rhh {visibility: hidden !important;}\n\
- \#tpa1,\#tpa2,\#tpa3,\#tpa4,\#tpa5,\#tpa5, \#spl, .ch, \#ads,\
- \#toolbar, \#google_ads_frame, \#mbEnd {display: none !important;}\n\
- .main_body, .j {width: 100%}\n</style>\n$0@
-s@<div style=\"padding-top:11px;min-width:500px\">@<div id="main_body">@
-s@(<table cellspacing=0 cellpadding=0 width=25% align=right bgcolor=\#ffffff border=0\
-|</font></td></tr></tbody></table><table align=\"right\" bgcolor=\"\#ffffff\"\
-|<table cellspacing=0 cellpadding=0 align=right bgcolor=\#ffffff border=0\
-|<table style=\"clear:both\" align=right width=25% cellspacing=\"0\" cellpadding=\"0\"\
- border=\"0\" bgcolor=\"\#ffffff\")@$0 id="ads"@
-s@(<br clear=all><table)( border=0 cellpadding=9><tr><td)@$1 id="toolbar"$2@
-
-#################################################################################
-#
-# yahoo: CSS-based block for Yahoo text ads. Also removes a width limitation.
-#
-#################################################################################
-FILTER: yahoo CSS-based block for Yahoo text ads. Also removes a width limitation.
-
-s@</head>@\n<style type="text/css">\n\
- /* Style sheet inserted by Privoxy's yahoo filter. */\n\
- \#symadbn, \#ymadbn, .yschbox, .yschhd, .bbox, \#yschsec, \#sec,\
- \#yschanswr, .yschftad, .yschspn, .yschspns, \#ygrp-sponsored-links,\
- \#nwad, \#MWA2, \#MSCM, \#yregad, \
- \#ks-ypn-ads, .ad, \#east, \#ygrp-vital {display: none !important;}\n\
- \#yschpri, \#yschweb, \#pri, \#web, \#main {width: 100% !important; max-width: 100% !important;}\n\
- \#yschqcon, \#yschtg {width: auto !important; /* No useless horizontal scrollbar please */}\n\
- \#composebox \#compose_editorArea {width: 70% !important; /* reasonably sized reply textarea please */\n\
- </style>\n$0\n@
-
-s@(<textarea\s+id="composeArea"[^>]*)width:545px;@$1width:70%;@isU
-
-#################################################################################
-#
-# msn: CSS-based block for MSN text ads. Also removes tracking URLs
-#      and a width limitation.
-#
-#################################################################################
-FILTER: msn CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.
-
-s@</head>@<style type="text/css">\n\
- /* Style sheet inserted by Privoxy's msn filter. */\n\
- .msn_ads, \#at, \#ar, .mktmsg {display: none !important;}\n\
- \#results, .flank, .results_area_flank, .results_area_stroke,\n\
- \#results_area, .SearchSection, .not, .sc_rslth1\n\
-.content, \#sw_foot, \#bf, \#sw_content, \#sidebar, \#pag\n\
- {width: 99% !important; min-width: 99% !important;\n\
- max-width: 100% !important; /* width:100% sometimes causes horizontal scrollbars */}\n\
- /* Remove "suggestions". They are next to worthless but partly overlap with the search results */\n\
- .suggestion, \#nys_right, \#nys {clear: both; display:none;}\n\
- \#content {padding-right: 0;}\n\
- </style>\n$0@
-# Are these ids still in use?
-s@(<div[^>]*) id=(["']?)ads_[^\2]*\2@$1 class="msn_ads"@Uig
-s@(<div[^>]*) class=(["']?)sb_ads[^\2]*\2@$1 class="msn_ads"@Uig
-s@(<a[^>]*href=\")http://g.msn.com/.*\?(http://.*)(&amp;&amp;DI=.*)(\")@$1$2$4@Ug
-s@(<a[^>]*)gping=\".*\"@$1 title="URL cleaned up by Privoxy's msn filter"@Ug
-
-#################################################################################
-#
-# blogspot: Cleans up some Blogspot blogs. Read the fine print before using this.
-#
-#           This filter also intentionally removes some navigation stuff and
-#           sets the page width to 100%. As a result, some rounded "corners" would
-#           appear to early or not at all and as fixing this would require a browser
-#           that understands background-size (CSS3), they are removed instead.
-#
-#           When applied to feeds, it removes comment titles that
-#           only contain the beginning of the actual comment.
-#
-#################################################################################
-FILTER: blogspot Cleans up some Blogspot blogs. Read the fine print before using this.
-
-s@</head>@<style type="text/css">\n\
- /* Style sheet inserted by Privoxy's blogspot filter. */\n\
- \#powered-by {display: none !important;}\n\
- \#wrap4, \#wrapper {margin-top: 0px }\n\
- \#blogheader, \#header {margin-top: 0.5em !important}\n\
- \#content {width: 98% }\n\
- \#main {width: 70% }\n\
- \#sidebar {width: 29% }\n\
- .post-body {overflow: auto;}\n\
- .blogComments {width: 100%; overflow: auto;}\n</style>\n$0@
-s@<body.*(?:<div id="space-for-ie"></div>|(<div id="(?:content|wrap4|wrapper)))@<body>\
- <!-- Privoxy's blogspot filter ditched some garbage here -->$1@Us
-s@(<div style=\"[^\"]*width:)30em@$1 100%@
-s@background:url\(\"http://www.blogblog.com/rounders[^\"]*\"\).*;@/*$0*/@Ug
-s@(background:\#[a-f\d]{3})( url\(\"http://www.blogblog.com/rounders[^\"]*\"\).*;)@$1 ;/*$2*/@Ug
-# Do the feed filtering magic as described above.
-s@<title(?:\s+type=\'text\')?>([^<]*)(?:\.\.\.)?\s*</title>\s*\
-(<content(?:\s+type=\'(?:html|text)\')?>\s*\1)@<title></title>$2@ig
-
-#################################################################################
-#
-# x-httpd-php-to-html: Changes the Content-Type header from
-#                      x-httpd-php to html. "Content-Type: x-httpd-php"
-#                      is set by clueless PHP users and causes many
-#                      browsers do open a download menu instead of
-#                      rendering the page.
-#
-#################################################################################
-SERVER-HEADER-FILTER: x-httpd-php-to-html Changes the Content-Type header from x-httpd-php to html.
-
-s@^(Content-Type:)\s*application/x-httpd-php@$1 text/html@i
-
-#################################################################################
-#
-# html-to-xml: Changes the Content-Type header from html to xml.
-#
-#################################################################################
-SERVER-HEADER-FILTER: html-to-xml Changes the Content-Type header from html to xml.
-
-s@^(Content-Type:)\s*text/html(;.*)?$@$1 application/xhtml+xml$2@i
-
-#################################################################################
-#
-# xml-to-html: Changes the Content-Type header from xml to html.
-#
-#################################################################################
-SERVER-HEADER-FILTER: xml-to-html Changes the Content-Type header from xml to html.
-
-s@^(Content-Type:)\s*(?:application|text)/(?:xhtml\+)?xml(;.*)?$@$1 text/html$2@i
-
-#################################################################################
-#
-# hide-tor-exit-notation: Remove the Tor exit node notation in Host and Referer headers.
-#
-#   Note: If Privoxy and Tor are chained and Privoxy is configured to
-#         use socks4a, one can use http://www.example.org.foobar.exit/
-#         to access the host www.example.org through Tor exit node foobar.
-#
-#         As the HTTP client isn't aware of this notation, it treats the
-#         whole string "www.example.org.foobar.exit" as host and uses it
-#         for the "Host" and "Referer" headers. From the server's point of
-#         view the resulting headers are invalid and can cause problems.
-#
-#         An invalid "Referer" header can trigger "hot-linking" protections,
-#         an invalid "Host" header will make it impossible for the server to
-#         find the right vhost (several domains hosted on the same IP address).
-#
-#         This filter removes the "foo.exit" part in those headers
-#         to prevent the mentioned problems. Note that it only modifies
-#         the HTTP headers, it doesn't make it impossible for the server
-#         to detect your Tor exit node based on the IP address the request is
-#         coming from.
-#
-#################################################################################
-CLIENT-HEADER-FILTER: hide-tor-exit-notation Removes the Tor exit node notation in Host and Referer headers.
-
-s@^((?:Referer|Host):\s*(?:https?://)?[^/]*)\.[^\./]*?\.exit@$1@i
-
-#################################################################################
-#
-# less-download-windows: Prevents annoying download windows for content types
-#                        the browser can handle itself.
-#
-#################################################################################
-SERVER-HEADER-FILTER: less-download-windows Prevent annoying download windows for content types the browser can handle itself.
-
-s@^Content-Disposition:.*filename=(["']?).*\.(png|gif|jpe?g|diff?|d?patch|c|h|pl|shar)\1.*$@@i
-s@^(Content-Type:)\s*(?:message/(?:news|rfc822)|text/x-.*|application/x-sh(?:\s|$))\s*@$1 text/plain@i
-
-#################################################################################
-#
-# image-requests: Tags detected image requests as "IMAGE-REQUEST". Whether
-#                 or not the detection actually works depends on the browser.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: image-requests Tags detected image requests as "IMAGE-REQUEST".
-
-s@^Accept:\s*image/.*@IMAGE-REQUEST@i
-
-#################################################################################
-#
-# css-requests:  Tags detected CSS requests as "CSS-REQUEST". Whether
-#                or not the detection actually works depends on the browser.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: css-requests Tags detected CSS requests as "CSS-REQUEST".
-
-s@^Accept:\s*text/css.*@CSS-REQUEST@i
-
-#################################################################################
-#
-# client-ip-address: Tags the request with the client's IP address.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: client-ip-address Tags the request with the client's IP address.
-
-s@^\w*\s+.*\s+HTTP/\d\.\d\s*@IP-ADDRESS: $origin@D
-
-#################################################################################
-#
-# http-method: Tags the request with its HTTP method.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: http-method Tags the request with its HTTP method.
-
-s@^(\w*).*HTTP/\d\.\d\s*$@$1@i
-
-#################################################################################
-#
-# allow-post: Tags POST requests as "ALLOWED-POST".
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: allow-post Tags POST requests as "ALLOWED-POST".
-
-s@^(?:POST)\s+.*\s+HTTP/\d\.\d\s*@ALLOWED-POST@i
-
-#################################################################################
-#
-# complete-url: Tags the request with the whole request URL.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: complete-url Tags the request with the whole request URL.
-
-s@^\w*\s+(.*)\s+HTTP/\d\.\d\s*$@$1@i
-
-#################################################################################
-#
-# user-agent: Tags the request with the complete User-Agent header.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: user-agent Tags the request with the complete User-Agent header.
-
-s@^User-Agent:.*@$0@i
-
-#################################################################################
-#
-# content-type: Tags the request with the content type declared by the server.
-#
-#################################################################################
-SERVER-HEADER-TAGGER: content-type Tags the request with the content type declared by the server.
-
-s@^Content-Type:\s*([^;]+).*@$1@i
-
-#################################################################################
-#
-# privoxy-control: The taggers create tags with the content of X-Privoxy-Control
-#                  headers, the filters remove said headers.
-#
-#################################################################################
-CLIENT-HEADER-TAGGER: privoxy-control Creates tags with the content of X-Privoxy-Control headers.
-
-s@^X-Privoxy-Control:\s*@@i
-
-CLIENT-HEADER-FILTER: privoxy-control Removes X-Privoxy-Control headers.
-
-s@^X-Privoxy-Control:.*@@i
-
-SERVER-HEADER-TAGGER: privoxy-control Creates tags with the content of X-Privoxy-Control headers.
-
-s@^X-Privoxy-Control:\s*@@i
-
-SERVER-HEADER-FILTER: privoxy-control Removes X-Privoxy-Control headers.
-
-s@^X-Privoxy-Control:.*@@i
-
-
-############################################################################## 
-#
-#  Revisions   :
-#     $Log: default.filter,v $
-#     Revision 1.71  2009/03/01 18:33:17  ler762
-#     couple of changes to the yahoo filter
-#     -get a bigger email message reply textarea
-#     -block a few more ads
-#     -remove the now useless northbanner css change
-#
-#     Revision 1.70  2009/02/21 13:01:51  fabiankeil
-#     Make blogspot's feed magic slightly more reliable.
-#
-#     Revision 1.69  2009/02/12 15:40:11  ler762
-#     more yahoo email ad blocking
-#
-#     Revision 1.68  2008/09/19 13:26:04  fabiankeil
-#     s@tounge@tongue@. Anonymously reported in #1648657.
-#
-#     Revision 1.67  2008/08/06 17:38:06  fabiankeil
-#     In banners-by-size, make sure white-space around the height
-#     attribute is removed as well and replace two spaces with
-#     "\s" so we don't get fooled by tabs. Fixes #2036125.
-#
-#     Revision 1.66  2008/08/03 17:27:47  fabiankeil
-#     Teach msn filter to catch a few new ad classes.
-#
-#     Revision 1.65  2008/07/21 13:43:44  fabiankeil
-#     Fix img-reorder regression introduced with my last commit.
-#     Some tags were terminated too soon, letting the browser render
-#     some of their arguments as text. Oops.
-#
-#     Revision 1.64  2008/07/12 15:49:09  fabiankeil
-#     - Don't let img-reorder touch width attributes
-#       that aren't followed by either whitespace or '>',
-#       as those usually indicate onclick nonsense.
-#       Problem and solution reported by Glenn Washburn in #2014552.
-#     - While at it, don't use more groups than necessary.
-#
-#     Revision 1.63  2008/06/27 12:53:41  fabiankeil
-#     Make sure the taggers css-requests and image-requests
-#     only match at the beginning of the header.
-#
-#     Revision 1.62  2008/06/21 17:02:03  fabiankeil
-#     Fix typo.
-#
-#     Revision 1.61  2008/05/21 18:44:43  fabiankeil
-#     - Let the content-type tagger ignore headers without value.
-#     - Remove a few unused lines at the end of the file.
-#
-#     Revision 1.60  2008/04/26 10:36:41  fabiankeil
-#     Let the msn filter hide another class.
-#
-#     Revision 1.59  2008/04/23 16:18:18  fabiankeil
-#     s@declarded@declared@
-#
-#     Revision 1.58  2008/02/02 15:27:19  fabiankeil
-#     Yet another yahoo update to get the width limitation removal working again.
-#
-#     Revision 1.57  2008/01/26 15:45:39  fabiankeil
-#     Don't let the less-download-windows filter mess up
-#     "Content-Type: application/x-shockwave-flash" headers.
-#
-#     Revision 1.56  2008/01/25 19:12:40  fabiankeil
-#     - Add yet another new yahoo ad id.
-#     - Don't let the first banners-by-link job punish URLs for merely
-#       containing the pattern "/jump/" when it should really look for
-#       "doubleclick\.net/jump/".
-#
-#     Revision 1.55  2007/12/31 19:53:59  fabiankeil
-#     Let the msn filter remove the width limitation again.
-#
-#     Revision 1.54  2007/12/31 19:11:31  fabiankeil
-#     - Let the yahoo filter remove the width limitation again.
-#     - Teach the blogspot filter to remove useless feed comment
-#       titles that only contain the beginning of the actual comment.
-#
-#     Revision 1.53  2007/12/23 15:48:12  fabiankeil
-#     - Lo and behold, the CSS fix for the MSN buttons is no longer necessary.
-#     - Add some new selectors the msn filter should hide.
-#     - Add the two yahoo selectors Lee reported in #1856574.
-#     - Add comments that the width limitation fixes stopped
-#       working for the msn and yahoo filter.
-#
-#     Revision 1.52  2007/11/27 18:35:48  fabiankeil
-#     Update CSS for the yahoo filter.
-#
-#     Revision 1.51  2007/11/04 16:15:11  fabiankeil
-#     - Add client-header taggers: client-ip-address,
-#       http-method, allow-post, complete-url and user-agent.
-#     - Add server-header tagger: content-type.
-#
-#     Revision 1.50  2007/11/03 15:05:30  fabiankeil
-#     Consistently use an empty line between the description and the PCRS code
-#     and end descriptions with dots. Patch submitted by Simon Ruderich.
-#
-#     Revision 1.49  2007/11/03 14:29:41  fabiankeil
-#     Spelling fixes mostly submitted by Simon Ruderich.
-#
-#     Revision 1.48  2007/10/17 18:11:32  fabiankeil
-#     Add privoxy-control header filters and taggers.
-#
-#     Revision 1.47  2007/10/06 15:45:25  fabiankeil
-#     Let msn hide sponsored links in #at divs.
-#
-#     Revision 1.46  2007/10/06 09:54:13  fabiankeil
-#     - Let msn hide sponsored links in #ar divs.
-#     - Teach banners-by-link not to block the graphs for sf's tracker statistics.
-#
-#     Revision 1.45  2007/08/11 16:54:12  fabiankeil
-#     - Complete the changes from r1.42.
-#     - Make crude-parental less sensitive to the amount of white-space,
-#       add the note that it doesn't work too well again and replace the
-#       DMOZ link with a less confusing explanation.
-#
-#     Revision 1.44  2007/07/18 11:06:56  hal9
-#     Replace notarget with '' in all popups filter to keep from breaking xhmtl per
-#     report from Siegfried Gipp.
-#
-#     Revision 1.43  2007/06/01 14:17:04  fabiankeil
-#     Mention possible delimiter conflicts with variables in dynamic pcrs commands.
-#
-#     Revision 1.42  2007/05/17 15:55:36  fabiankeil
-#     Undo an improperly tested last-minute change
-#     and turn "text-requests" back into "css-requests".
-#
-#     Revision 1.41  2007/05/17 15:45:41  fabiankeil
-#     - Mention new filter types and the 'D' option.
-#     - Header filters are now case-insensitive and accept a
-#       varying amount of whitespace after the colon.
-#     - Add another selector for yahoo ads.
-#     - New server-header filter: less-download-windows
-#     - New client-header taggers: text-requests and image-requests.
-#
-#     Revision 1.40  2007/03/20 15:40:00  fabiankeil
-#     Adjust to new world order with dedicated header-filter actions.
-#
-#     Revision 1.39  2007/02/21 14:10:23  fabiankeil
-#     - Fix a js-annoyances pcrs command that broke
-#       evaluated code. (BR #1124071, thanks to Bor Gergely)
-#     - Have unsolicited-popups and all-popups catch the
-#       wheather.com popup reported in in AF #1640173.
-#
-#     Revision 1.38  2007/02/19 11:22:48  hal9
-#     Adding back the orginal filter content to offset problems found by Fabian.
-#
-#     Revision 1.37  2007/02/17 13:29:44  hal9
-#     Updates to the crude parental filter per Feature Requests item #1648657.
-#
-#     Revision 1.36  2007/02/05 16:47:31  fabiankeil
-#     - Let banners-by-link look for "advert".
-#     - Fix XML systax problems with banners-by-link
-#       and banners-by-size (AF#1651570).
-#
-#     Revision 1.35  2006/12/21 12:28:12  fabiankeil
-#     Escaping special characters in filter descriptions is no
-#     longer necessary, it's done by Privoxy now.
-#
-#     Revision 1.34  2006/12/12 17:32:23  fabiankeil
-#     Added id mbEnd to google filter, it's now and then
-#     used for the sponsored links.
-#
-#     Have js-annoyances try to prevent status bar
-#     modifications where the status bar text is
-#     inside another variable. Fixes 1605710.
-#
-#     Revision 1.33  2006/11/16 17:10:43  fabiankeil
-#     Removed webbugs debugging comment again.
-#     The apostrophe could break JavaScript and
-#     the comment itself could mess up existing
-#     comments.
-#
-#     Revision 1.32  2006/11/10 18:04:04  fabiankeil
-#     Have no-ping print the ping warning in red.
-#
-#     Modified yahoo to keep in sync with recent
-#     CSS changes and to suppress a useless horizontal
-#     scrollbar.
-#
-#     msn now makes sure that the continue-link boxes
-#     act as links (the original CSS just changes the cursor).
-#
-#     Changed fun filter regex to leave microsoft links alone.
-#     Fixes BR 1019996.
-#
-#     Revision 1.31  2006/10/21 13:12:28  fabiankeil
-#     Added no-ping and hide-tor-exit-notation.
-#
-#     Adjusted jumping-windows to break less.
-#     Fixes BR 1146134.
-#
-#     Revision 1.30  2006/10/18 12:36:50  fabiankeil
-#     google filter now cleans Google groups as well.
-#
-#     Revision 1.29  2006/10/11 14:03:17  fabiankeil
-#     Changed img-reorder regex to only move width
-#     attributes if they are following at least one
-#     whitespace. Fixes BR 1328455.
-#
-#     Revision 1.28  2006/10/11 13:31:13  fabiankeil
-#     Added Anduin Withers' js-annoyances fix
-#     for not messing up escaped quotes. Fixes BR 999765.
-#
-#     Improved blogspot filter to make it less likely that
-#     the blogspot banner at the top of the page is missed.
-#
-#     Revision 1.27  2006/10/08 17:00:51  fabiankeil
-#     Modified webbugs filter to create a comment around the offending
-#     image instead of removing it entirely.
-#
-#     Adjusted regex to only match if there's at least one whitespace
-#     before the width and height attributes. Makes it more likely that
-#     they are indeed attributes, and not part of the value of another attribute.
-#     Solves BR 1035587.
-#
-#     Thanks to Martin Thomas for diagnosing the cause of the problem.
-#
-#     Revision 1.26  2006/10/06 18:06:16  fabiankeil
-#     Added header filter x-httpd-php-to-html
-#     and reverted another img-reorder whitespace
-#     problem.
-#
-#     Revision 1.25  2006/10/06 15:26:09  fabiankeil
-#     Bumped copyright year.
-#
-#     Reverted parts of the last img-reorder change
-#     which were intended to remove superfluous whitespace
-#     but had the side effect to mess up some tags.
-#
-#     Modified banners-by-size and banners-by-link to
-#     use border value "0" instead of "\0". Fixes BR 1100065.
-#
-#     Revision 1.24  2006/10/06 11:25:31  fabiankeil
-#     Taught img-reorder not to break img tags
-#     with empty src attributes. Fixes BR 1089474.
-#     Thanks to Raphael Moll for reporting.
-#
-#     Revision 1.23  2006/10/05 14:46:28  fabiankeil
-#     Replaced "<" in img-reorder's description with "&lt;".
-#
-#     Modified msn filter to tag ads with classes instead
-#     of ids. There may be more than one ad per page,
-#     but ids are required to be unique.
-#
-#     Revision 1.22  2006/10/04 19:17:14  fabiankeil
-#     Incorportated Frédéric Crozat's ie-exploits
-#     modification to make it less trigger-happy.
-#
-#     Modified blogspot filter to make .post-body
-#     scrollable if necessary.
-#
-#     Revision 1.21  2006/10/02 16:21:14  fabiankeil
-#     Adjusted yahoo filter to hide .yschspns as well.
-#     Added header filters: html-to-xml and xml-to-html.
-#
-#     Revision 1.20  2006/10/01 21:00:22  fabiankeil
-#     New site-specific filters: google, yahoo, msn and blogspot.
-#
-#     Revision 1.19  2006/07/18 14:48:45  david__schmidt
-#     Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#     with what was really the latest development (the v_3_0_branch branch)
-#
-#     Revision 1.11.2.23  2004/02/17 13:34:01  oes
-#     - Beefed up the protection of the unsolicited-popups
-#       filter against matching in JavaScript string constants.
-#     - Extended the fun filter with a German joke
-#     - Extended the site-specifics filter with a convenience
-#       reeplacement for managing mailing lists at SourceForge
-#
-#     Revision 1.11.2.22  2004/01/30 15:29:29  oes
-#     Updated the copyright note
-#
-#     Revision 1.11.2.21  2004/01/20 15:15:01  oes
-#     Detail enhancement in all-popups
-#
-#     Revision 1.11.2.20  2004/01/06 16:46:14  oes
-#     Fixed a JS syntax problem in jumping-windows
-#
-#     Revision 1.11.2.19  2003/12/17 17:09:25  oes
-#     Added remedy against IE address bar spoofing
-#
-#     Revision 1.11.2.18  2003/12/02 11:25:27  oes
-#     Fixed a line trashed in previous commit
-#
-#     Revision 1.11.2.17  2003/12/01 21:58:46  oes
-#     Assorted tuning:
-#
-#      - unsolicited-popups no longer matches at start or end of quoted
-#        strings, and is now activated earlier and deactivated later in
-#        the page.
-#      - replacement images in banners-by-* now without border
-#      - more effective shockwave flash flattening
-#      - Custom annoyance filtering for Yahoo Groups, Monster.com, NY Times.
-#
-#     Revision 1.11.2.16  2003/05/08 09:44:56  oes
-#     Allow extra parameters in blink,marquee tags. Fixes bug #734012
-#
-#     Revision 1.11.2.15  2003/03/30 13:57:08  oes
-#     Making unsolicited-popups safe for use on <html> tags enclosed in JS strings
-#
-#     Revision 1.11.2.14  2003/03/19 13:17:50  oes
-#     - Added filter "site-specifics" to address site specific problems
-#     - Fixed a small problem in the img-reorder filter
-#
-#     Revision 1.11.2.13  2003/03/18 19:28:59  oes
-#     Fixed a minor problem in the img-reorder filter
-#
-#     Revision 1.11.2.12  2003/03/15 14:06:58  oes
-#      - Assorted refinements, optimizations and fixes in the js-annoyances,
-#        img-reorder, banners-by-size, banners-by-link, webbugs, refresh-tags,
-#        html-annoyances, content-cookies and fun filters
-#      - Replaced filter "popups" by choice between two modes:
-#        - "unsolicited-popups" tries to catch only the unsolicited ones
-#        - "all-popups" tries to kill them all (as before)
-#      - New filter "tiny-textforms" Help those tiny or hard-wrap textareas.
-#      - New filter "jumping-windows" that prevents windows from resizing
-#        and moving themselves
-#      - Replaced "nimda" with more general "ie-exploits" filter in which
-#        all filters for exploits shall be collected
-#
-#     Revision 1.11.2.11  2002/11/12 16:14:43  oes
-#     Exchanged js-annoyance filter against status bar rewrites with improved version by Don Libes
-#
-#     Revision 1.11.2.10  2002/11/11 13:39:47  oes
-#     Make refresh-tags filter work even on incorrect refresh tags like found on usatoday.com
-#
-#     Revision 1.11.2.9  2002/11/08 16:39:17  oes
-#     Made img-reorder more cautious. Fixes bug #632715
-#
-#     Revision 1.11.2.8  2002/10/13 21:56:52  hal9
-#     Adding demoronizer filter. This should include all the common abuses. I have
-#     left a few of the rare cases commented out (never found these in the wild).
-#
-#     Revision 1.11.2.7  2002/09/25 15:09:39  oes
-#     Preserve original quoting style in <img> tags wherever possible. Fixes Bug #605956
-#
-#     Revision 1.11.2.6  2002/08/23 14:12:26  oes
-#     Proofed frameset-borders against "fremaborder=0 border=0"
-#
-#     Revision 1.11.2.5  2002/08/22 15:05:20  oes
-#     Added Filter to make Quicktime movies saveable (thanks to aaron@xxxxxxxxxxxx for the idea)
-#
-#     Revision 1.11.2.4  2002/08/10 11:32:29  oes
-#     Attribute values in replacement tags of banners-by-size filter now undelimited. (Fixes bug #592493)
-#
-#     Revision 1.11.2.3  2002/08/05 11:43:56  oes
-#     Fixed a bug in the popups filter that was introduced with the last fix :-(
-#
-#     Revision 1.11.2.2  2002/08/01 11:20:13  oes
-#     Fixed bugs 587802, 577802 and an unreported one
-#
-#     Revision 1.11.2.1  2002/07/26 15:18:26  oes
-#     - All filters reviewed and many shorcomings fixed
-#     - New filters: img-reorder, banners-by-link and js-events
-#     - Jobs reorderd because they are now executed in order of
-#       appearance
-#
-#     Revision 1.11  2002/05/24 00:57:18  oes
-#     Made WeBugs job ungreedy; Fixes bug 559190
-#
-#     Revision 1.10  2002/04/18 10:14:19  oes
-#     renamed some filters
-#
-#     Revision 1.9  2002/04/11 07:36:35  oes
-#     Generalized js-popup filter
-#
-#     Revision 1.8  2002/04/10 17:07:21  oes
-#     Fixed potentially desctructive jobs, added noflash filter
-#
-#     Revision 1.7  2002/04/09 18:34:51  oes
-#     Fixed HTML syntax in replacements
-#
-#     Revision 1.6  2002/04/03 19:49:52  swa
-#     name change
-#
-#     Revision 1.5  2002/03/27 15:30:26  swa
-#     have a consistent appearance
-#
-#     Revision 1.4  2002/03/26 22:29:54  swa
-#     we have a new homepage!
-#
-#     Revision 1.3  2002/03/24 16:08:03  jongfoster
-#     Fixing banners-by-size for new config URLs
-#
-#     Revision 1.2  2002/03/24 13:02:18  swa
-#     name change related issues.
-#
-#     Revision 1.1  2002/03/24 11:37:39  jongfoster
-#     Name change
-#
-#     Revision 1.24  2002/03/16 20:39:54  oes
-#      - Added descriptions to the filters so users will know what they select in the cgi editor
-#      - Added content-cookies filter
-#      - Bugfixed many jobs (Thanks to Al for some hints)
-#
-#     Revision 1.22  2002/03/12 13:42:50  oes
-#     Fixing & Optimizing REs
-#
-#     Revision 1.21  2002/03/12 11:59:20  oes
-#     Beefed up Buzzword Bingo
-#
-#     Revision 1.20  2002/03/12 01:42:50  oes
-#     Introduced modular filters
-#
-#     Revision 1.19  2002/03/10 19:49:24  oes
-#     Added expression to kill referer tracking in JavaScripts
-#
-#     Revision 1.18  2002/03/08 17:14:12  oes
-#     PNG -> image in comments
-#
-#     Revision 1.17  2002/03/07 03:50:54  oes
-#     Adapted comments to new built-in images
-#
-#     Revision 1.16  2002/02/21 00:12:19  jongfoster
-#     Modifying the banner regexps to use long URLS and to autodetect
-#     whether to show a logo or a transparent GIF, based on actionsfile
-#     setting.
-#
-#     Revision 1.15  2001/12/28 23:54:20  steudten
-#     Fix for feature Req #495374: http-equiv problem
-#
-#     Revision 1.14  2001/12/09 18:55:11  david__schmidt
-#     Updated CODE_STATUS to beta, commented out microsuck line in re_filterfile
-#     for 2.9.10 beta
-#
-#     Revision 1.13  2001/10/13 13:11:20  joergs
-#     Fixed WebBug filter.
-#
-#     Revision 1.12  2001/10/07 15:46:42  oes
-#     Followed Guy's proposal to change the document.cookie job
-#
-#     Revision 1.11  2001/09/21 12:34:00  joergs
-#     Added filter to replace "Nimda" code by a warning.
-#
-#     Revision 1.10  2001/07/20 11:04:26  oes
-#     Added Rodneys javascript cookie filter
-#
-#     Revision 1.9  2001/07/13 14:03:48  oes
-#     Elimiated yet another bug in the banner-by-size jobs. Shame on me!
-#
-#     Revision 1.8  2001/06/29 13:34:00  oes
-#     - Added explanation for U and T options
-#     - Added hint on image replacement by CGI call
-#     - Fixed bug in banner-by-size jobs
-#
-#     Revision 1.7  2001/06/19 14:21:56  oes
-#     Fixed microsuck line
-#
-#     Revision 1.6  2001/06/09 14:01:57  swa
-#     header. cosmetics. default: no messing ala microsuck.
-#
diff --git a/external/privoxy/doc/gpl.html b/external/privoxy/doc/gpl.html
deleted file mode 100644
index 17c517d..0000000
--- a/external/privoxy/doc/gpl.html
+++ /dev/null
@@ -1,560 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<!-- $Id: gpl.html,v 1.4 2002/04/08 20:39:43 swa Exp $
-
-     See copyright details at end of file
-
-     After changing this file, please run it through "HTML Tidy"
-     (from http://www.w3.org/People/Raggett/tidy/)
-     It should have no warnings or errors.
--->
-
-<html>
-  <head>
-    <title>The GNU General Public License</title>
-    <meta name="description" content=
-    "GNU General Public License, as used by Junkbuster">
-    <meta name="keywords" content="">
-<style type="text/css">
-<!--
-h2           { text-align: Center; font-family: arial, helvetica, sans-serif }
-p.sans       { font-family: arial, helvetica, sans-serif }
-b.dot        { color: #FF0000 }
--->
-</style>
-  </head>
-
-  <body bgcolor="#f8f8f0" link="#000078" alink="#ff0022" vlink=
-  "#787878">
-    <p class="sans"><a href="http://www.privoxy.org/";>
-    Website</a> <b class="dot">&middot;</b> <a href="ijbman.html">
-    Manual</a> <b class="dot">&middot;</b> <a href="ijbfaq.html">
-    FAQ</a> <b class="dot">&middot;</b> <b>GPL</b></p>
-
-    <h1 align="center"><a name="top_of_page">Internet J<small>UNK<i
-    style="color: #FF0000">BUSTER</i></small> License</a></h1>
-
-    <h1>This document is out of date</h1>
-
-    <p><b>Development of Junkbuster is ongoing and this document is
-    no longer current. However, it may provide some assistance. If
-    you have problems, please use the <a href=
-    "http://groups.yahoo.com/group/junkbuster-users/";>Yahoo Groups
-    mailing list</a> (which includes an archive of mail), the
-    SourceForge.net <a href=
-    "http://sourceforge.net/projects/ijbswa/";>project page</a>, or
-    see the project's <a href="http://www.privoxy.org/";>home
-    page</a>. Please also bear in mind that versions 2.9.x of
-    Junkbuster are development releases, and are not production
-    quality.</b></p>
-
-    <h3 align="center">The GNU General Public License</h3>
-
-    <p class="sans"><a name="notus"><b>We did not write the GPL:
-    the <a href="http://www.fsf.org/fsf/fsf.html";>Free Software
-    Foundation</a> did</b></a></p>
-
-    <h3><img border="0" width="14" height="14" src="fb.gif" alt=
-    "*">&nbsp; The GPL allows copying and changing of copyrighted
-    documents</h3>
-
-    <p><a name="fsf">The Free Software Foundation</a> <a href=
-    "http://www.fsf.org/fsf/fsf.html";>(FSF)</a> is a non-profit
-    institution that designed the GNU General Public License (GPL)
-    to promote the publication of free software. The GPL is used by
-    thousands of programmers who want to give others the right to
-    copy and modify the source code of their programs. Millions of
-    people benefit from this.</p>
-
-    <p><a name="junkbuster">We use the GPL</a> to allow everyone to
-    use, copy and modify the Internet Junkbuster as they wish. <a
-    name="separate">Companies can use it for commercial
-    purposes,</a> but they are not permitted to use it in products
-    that they claim as their property.</p>
-
-    <p><a name="text">The GPL</a> can also be used on documents
-    written in human languages. This documentation for the Internet
-    Junkbuster is also under the GPL. This means that you do not
-    have to break copyright laws in order to print a page or email
-    a screen of the text to someone, for example.</p>
-
-    <p><a name="rest">The</a> remainder of this page is the text of
-    the GPL. As legal documents go it's relatively clear, but
-    unfortunately it's fairly long because it has to cover a lot of
-    details. The HTML formatting is ours, and should not be
-    misinterpreted as changing the license in any way.</p>
-
-    <p align="center"><a href="#top_of_page"><img border="0" width=
-    "250" height="15" src="top.gif" alt=
-    "--- Back to Top of Page ---"></a></p>
-
-    <h2><a name="v2">Version 2, June 1991</a></h2>
-
-    <blockquote>
-      <a name="crn">Copyright 1989, 1991</a><br>
-       <a name="address">Free Software Foundation, Inc.</a><br>
-       675 Mass Ave.<br>
-       Cambridge, MA 02139<br>
-       USA
-    </blockquote>
-    <a name="changing">Everyone</a> 
-
-    <p>is permitted to copy and distribute verbatim copies of this
-    license document, but changing it is not allowed.</p>
-
-    <h3><a name="pream"><img border="0" width="14" height="14" src=
-    "fb.gif" alt="*"></a>&nbsp; Preamble</h3>
-
-    <p>The licenses for most software are designed to take away
-    your freedom to share and change it. By contrast, the GNU
-    General Public License is intended to guarantee your freedom to
-    share and change free software--to make sure the software is
-    free for all its users. This General Public License applies to
-    most of the Free Software Foundation's software and to any
-    other program whose authors commit to using it. (Some other
-    Free Software Foundation software is covered by the GNU Library
-    General Public License instead.) You can apply it to your
-    programs, too.</p>
-
-    <p><a name="freedom">When we speak of free software,</a> we are
-    referring to freedom, not price. Our General Public Licenses
-    are designed to make sure that you have the freedom to
-    distribute copies of free software (and charge for this service
-    if you wish), that you receive source code or can get it if you
-    want it, that you can change the software or use pieces of it
-    in new free programs; and that you know you can do these
-    things.</p>
-
-    <p><a name="forbid">To protect your rights,</a> we need to make
-    restrictions that forbid anyone to deny you these rights or to
-    ask you to surrender the rights. These restrictions translate
-    to certain responsibilities for you if you distribute copies of
-    the software, or if you modify it.</p>
-
-    <p><a name="allrights">For example,</a> if you distribute
-    copies of such a program, whether gratis or for a fee, you must
-    give the recipients all the rights that you have. You must make
-    sure that they, too, receive or can get the source code. And
-    you must show them these terms so they know their rights.</p>
-
-    <p><a name="steps">We protect your rights with two steps:</a>
-    (1) copyright the software, and (2) offer you this license
-    which gives you legal permission to copy, distribute and/or
-    modify the software.</p>
-
-    <p><a name="protection">Also,</a> for each author's protection
-    and ours, we want to make certain that everyone understands
-    that there is no warranty for this free software. If the
-    software is modified by someone else and passed on, we want its
-    recipients to know that what they have is not the original, so
-    that any problems introduced by others will not reflect on the
-    original authors' reputations.</p>
-
-    <p><a name="threat">Finally,</a> any free program is threatened
-    constantly by software patents. We wish to avoid the danger
-    that redistributors of a free program will individually obtain
-    patent licenses, in effect making the program proprietary. To
-    prevent this, we have made it clear that any patent must be
-    licensed for everyone's free use or not licensed at all.</p>
-
-    <p><a name="terms">The precise terms and conditions</a> for
-    copying, distribution and modification follow.</p>
-
-    <h3><a name="tnc"><img border="0" width="14" height="14" src=
-    "fb.gif" alt="*"></a>&nbsp; GNU General Public License: Terms
-    and Conditions for Copying, Distribution and Modification</h3>
-
-    <p><a name="applies">O.</a> This License applies to any program
-    or other work which contains a notice placed by the copyright
-    holder saying it may be distributed under the terms of this
-    General Public License. The "Program", below, refers to any
-    such program or work, and a "work based on the Program" means
-    either the Program or any derivative work under copyright law:
-    that is to say, a work containing the Program or a portion of
-    it, either verbatim or with modifications and/or translated
-    into another language. (Hereinafter, translation is included
-    without limitation in the term "modification".) Each licensee
-    is addressed as "you".</p>
-
-    <p><a name="scope">Activities</a> other than copying,
-    distribution and modification are not covered by this License;
-    they are outside its scope. The act of running the Program is
-    not restricted, and the output from the Program is covered only
-    if its contents constitute a work based on the Program
-    (independent of having been made by running the Program).</p>
-
-    <p><a name="depends">Whether that is true depends on what the
-    Program does.</a><br>
-    </p>
-
-    <ol type="1">
-      <li>
-        <a name="verbatim">You may copy</a> and distribute verbatim
-        copies of the Program's source code as you receive it, in
-        any medium, provided that you conspicuously and
-        appropriately publish on each copy an appropriate copyright
-        notice and disclaimer of warranty; keep intact all the
-        notices that refer to this License and to the absence of
-        any warranty; and give any other recipients of the Program
-        a copy of this License along with the Program. 
-
-        <p><a name="fee">You may charge a fee</a> for the physical
-        act of transferring a copy, and you may at your option
-        offer warranty protection in exchange for a fee.</p>
-      </li>
-
-      <li>
-        <a name="modify">You may modify</a> your copy or copies of
-        the Program or any portion of it, thus forming a work based
-        on the Program, and copy and distribute such modifications
-        or work under the terms of Section 1 above, provided that
-        you also meet all of these conditions:<br>
-         
-
-        <ol type="a">
-          <li><a name="notices">You must cause</a> the modified
-          files to carry prominent notices stating that you changed
-          the files and the date of any change.</li>
-
-          <li><a name="nocharge">You must</a> cause any work that
-          you distribute or publish, that in whole or in part
-          contains or is derived from the Program or any part
-          thereof, to be licensed as a whole at no charge to all
-          third parties under the terms of this License.</li>
-
-          <li><a name="interactive">If the modified program</a>
-          normally reads commands interactively when run, you must
-          cause it, when started running for such interactive use
-          in the most ordinary way, to print or display an
-          announcement including an appropriate copyright notice
-          and a notice that there is no warranty (or else, saying
-          that you provide a warranty) and that users may
-          redistribute the program under these conditions, and
-          telling the user how to view a copy of this License.
-          (Exception: if the Program itself is interactive but does
-          not normally print such an announcement, your work based
-          on the Program is not required to print an
-          announcement.)</li>
-        </ol>
-
-        <p><a name="sections">These requirements</a> apply to the
-        modified work as a whole. If identifiable sections of that
-        work are not derived from the Program, and can be
-        reasonably considered independent and separate works in
-        themselves, then this License, and its terms, do not apply
-        to those sections when you distribute them as separate
-        works. But when you distribute the same sections as part of
-        a whole which is a work based on the Program, the
-        distribution of the whole must be on the terms of this
-        License, whose permissions for other licensees extend to
-        the entire whole, and thus to each and every part
-        regardless of who wrote it.</p>
-
-        <p><a name="intent">Thus,</a> it is not the intent of this
-        section to claim rights or contest your rights to work
-        written entirely by you; rather, the intent is to exercise
-        the right to control the distribution of derivative or
-        collective works based on the Program.</p>
-
-        <p><a name="aggregation">In addition,</a> mere aggregation
-        of another work not based on the Program with the Program
-        (or with a work based on the Program) on a volume of a
-        storage or distribution medium does not bring the other
-        work under the scope of this License.</p>
-      </li>
-
-      <li>
-        <a name="exeutable">You may copy</a> and distribute the
-        Program (or a work based on it, under Section 2) in object
-        code or executable form under the terms of Sections 1 and 2
-        above provided that you also do one of the following:<br>
-         
-
-        <ol type="a">
-          <li><a name="medium">Accompany it</a> with the complete
-          corresponding machine-readable source code, which must be
-          distributed under the terms of Sections 1 and 2 above on
-          a medium customarily used for software interchange;
-          or,</li>
-
-          <li><a name="written">Accompany it with a written
-          offer,</a> valid for at least three years, to give any
-          third party, for a charge no more than your cost of
-          physically performing source distribution, a complete
-          machine-readable copy of the corresponding source code,
-          to be distributed under the terms of Sections 1 and 2
-          above on a medium customarily used for software
-          interchange; or,</li>
-
-          <li><a name="distrib">Accompany it</a> with the
-          information you received as to the offer to distribute
-          corresponding source code. (This alternative is allowed
-          only for noncommercial distribution and only if you
-          received the program in object code or executable form
-          with such an offer, in accord with Subsection b
-          above.)</li>
-        </ol>
-
-        <p><a name="preferred">The source code</a> for a work means
-        the preferred form of the work for making modifications to
-        it. For an executable work, complete source code means all
-        the source code for all modules it contains, plus any
-        associated interface definition files, plus the scripts
-        used to control compilation and installation of the
-        executable. However, as a special exception, the source
-        code distributed need not include anything that is normally
-        distributed (in either source or binary form) with the
-        major components (compiler, kernel, and so on) of the
-        operating system on which the executable runs, unless that
-        component itself accompanies the executable.</p>
-
-        <p><a name="access">If distribution of executable or object
-        code is made</a> by offering access to copy from a
-        designated place, then offering equivalent access to copy
-        the source code from the same place counts as distribution
-        of the source code, even though third parties are not
-        compelled to copy the source along with the object
-        code.</p>
-      </li>
-
-      <li><a name="otherwise">You may not copy,</a> modify,
-      sublicense, or distribute the Program except as expressly
-      provided under this License. Any attempt otherwise to copy,
-      modify, sublicense or distribute the Program is void, and
-      will automatically terminate your rights under this License.
-      However, parties who have received copies, or rights, from
-      you under this License will not have their licenses
-      terminated so long as such parties remain in full
-      compliance.</li>
-
-      <li><a name="voluntary">You are not required</a> to accept
-      this License, since you have not signed it. However, nothing
-      else grants you permission to modify or distribute the
-      Program or its derivative works. These actions are prohibited
-      by law if you do not accept this License. Therefore, by
-      modifying or distributing the Program (or any work based on
-      the Program), you indicate your acceptance of this License to
-      do so, and all its terms and conditions for copying,
-      distributing or modifying the Program or works based on
-      it.</li>
-
-      <li><a name="redistrib">Each time you redistribute</a> the
-      Program (or any work based on the Program), the recipient
-      automatically receives a license from the original licensor
-      to copy, distribute or modify the Program subject to these
-      terms and conditions. You may not impose any further
-      restrictions on the recipients' exercise of the rights
-      granted herein. You are not responsible for enforcing
-      compliance by third parties to this License.</li>
-
-      <li>
-        <a name="patent">If, as a consequence of a court
-        judgment</a> or allegation of patent infringement or for
-        any other reason (not limited to patent issues), conditions
-        are imposed on you (whether by court order, agreement or
-        otherwise) that contradict the conditions of this License,
-        they do not excuse you from the conditions of this License.
-        If you cannot distribute so as to satisfy simultaneously
-        your obligations under this License and any other pertinent
-        obligations, then as a consequence you may not distribute
-        the Program at all. For example, if a patent license would
-        not permit royalty-free redistribution of the Program by
-        all those who receive copies directly or indirectly through
-        you, then the only way you could satisfy both it and this
-        License would be to refrain entirely from distribution of
-        the Program. 
-
-        <p><a name="invalid">If any portion</a> of this section is
-        held invalid or unenforceable under any particular
-        circumstance, the balance of the section is intended to
-        apply and the section as a whole is intended to apply in
-        other circumstances.</p>
-
-        <p><a name="induce">It is not the purpose</a> of this
-        section to induce you to infringe any patents or other
-        property right claims or to contest validity of any such
-        claims; this section has the sole purpose of protecting the
-        integrity of the free software distribution system, which
-        is implemented by public license practices. Many people
-        have made generous contributions to the wide range of
-        software distributed through that system in reliance on
-        consistent application of that system; it is up to the
-        author/donor to decide if he or she is willing to
-        distribute software through any other system and a licensee
-        cannot impose that choice.</p>
-
-        <p><a name="clarify">This section</a> is intended to make
-        thoroughly clear what is believed to be a consequence of
-        the rest of this License.</p>
-      </li>
-
-      <li><a name="geog">If the distribution</a> and/or use of the
-      Program is restricted in certain countries either by patents
-      or by copyrighted interfaces, the original copyright holder
-      who places the Program under this License may add an explicit
-      geographical distribution limitation excluding those
-      countries, so that distribution is permitted only in or among
-      countries not thus excluded. In such case, this License
-      incorporates the limitation as if written in the body of this
-      License.</li>
-
-      <li><a name="revise">The Free Software Foundation</a> may
-      publish revised and/or new versions of the General Public
-      License from time to time. Such new versions will be similar
-      in spirit to the present version, but may differ in detail to
-      address new problems or concerns. Each version is given a
-      distinguishing version number. If the Program specifies a
-      version number of this License which applies to it and "any
-      later version", you have the option of following the terms
-      and conditions either of that version or of any later version
-      published by the Free Software Foundation. If the Program
-      does not specify a version number of this License, you may
-      choose any version ever published by the Free Software
-      Foundation.</li>
-
-      <li>
-        <a name="permission">If you wish to incorporate parts</a>
-        of the Program into other free programs whose distribution
-        conditions are different, write to the author to ask for
-        permission. For software which is copyrighted by the Free
-        Software Foundation, write to the Free Software Foundation;
-        we sometimes make exceptions for this. Our decision will be
-        guided by the two goals of preserving the free status of
-        all derivatives of our free software and of promoting the
-        sharing and reuse of software generally. 
-
-        <p><a name="nowarr">NO WARRANTY</a></p>
-      </li>
-
-      <li><a name="foc">BECAUSE THE PROGRAM IS LICENSED FREE OF
-      CHARGE,</a> THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
-      EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
-      STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-      PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND,
-      EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-      THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-      PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
-      PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
-      PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
-      SERVICING, REPAIR OR CORRECTION.</li>
-
-      <li><a name="liable">IN NO EVENT UNLESS REQUIRED</a> BY
-      APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
-      HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
-      THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-      INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
-      DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-      PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
-      BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-      PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-      PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
-      ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.</li>
-    </ol>
-
-    <p>END OF TERMS AND CONDITIONS<br>
-    <br>
-    </p>
-
-    <h3><a name="append"><img border="0" width="14" height="14"
-    src="fb.gif" alt="*"></a>&nbsp; Appendix: How to Apply These
-    Terms to Your New Programs</h3>
-
-    <p>If you develop a new program, and you want it to be of the
-    greatest possible use to the public, the best way to achieve
-    this is to make it free software which everyone can
-    redistribute and change under these terms.</p>
-
-    <p><a name="attach">To do so,</a> attach the following notices
-    to the program. It is safest to attach them to the start of
-    each source file to most effectively convey the exclusion of
-    warranty; and each file should have at least the "copyright"
-    line and a pointer to where the full notice is found.</p>
-
-    <blockquote>
-      &lt;one line to give the program's name and a brief idea of
-      what it does.&gt; Copyright (C) 19yy &lt;name of author&gt; 
-
-      <p><a name="free">This program is free software;</a> you can
-      redistribute it and/or modify it under the terms of the GNU
-      General Public License as published by the Free Software
-      Foundation; either version 2 of the License, or (at your
-      option) any later version.</p>
-
-      <p><a name="merchant">This program</a> is distributed in the
-      hope that it will be useful, but WITHOUT ANY WARRANTY;
-      without even the implied warranty of MERCHANTABILITY or
-      FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
-      License for more details.</p>
-
-      <p><a name="ifnot">You should</a> have received a copy of the
-      GNU General Public License along with this program; if not,
-      write to the Free Software Foundation, Inc., 675 Mass Ave,
-      Cambridge, MA 02139, USA.</p>
-    </blockquote>
-
-    <p><a name="contact">Also add</a> information on how to contact
-    you by electronic and paper mail.</p>
-
-    <p><a name="short">If the program is interactive,</a> make it
-    output a short notice like this when it starts in an
-    interactive mode:</p>
-
-    <blockquote>
-      Gnomovision version 69, Copyright (C) 19yy name of author
-      Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
-      type `show w'. This is free software, and you are welcome to
-      redistribute it under certain conditions; type `show c' for
-      details.
-    </blockquote>
-
-    <p><a name="hypo">The hypothetical</a> commands `show w' and
-    `show c' should show the appropriate parts of the General
-    Public License. Of course, the commands you use may be called
-    something other than `show w' and `show c'; they could even be
-    mouse-clicks or menu items--whatever suits your program.</p>
-
-    <p><a name="disclaimer">You should also get your employer</a>
-    (if you work as a programmer) or your school, if any, to sign a
-    "copyright disclaimer" for the program, if necessary. Here is a
-    sample; alter the names:</p>
-
-    <blockquote>
-      Yoyodyne, Inc., hereby disclaims all copyright interest in
-      the program `Gnomovision' (which makes passes at compilers)
-      written by James Hacker. &lt;signature of Ty Coon&gt;, 1
-      April 1989<br>
-       Ty Coon, President of Vice
-    </blockquote>
-
-    <p><a name="library">This General Public License</a> does not
-    permit incorporating your program into proprietary programs. If
-    your program is a subroutine library, you may consider it more
-    useful to permit linking proprietary applications with the
-    library. If this is what you want to do, use the GNU Library
-    General Public License instead of this License.</p>
-
-    <p align="center"><a href="#top_of_page"><img border="0" width=
-    "250" height="15" src="top.gif" alt=
-    "--- Back to Top of Page ---"></a></p>
-
-    <p class="sans"><a href="http://www.privoxy.org/";>
-    Website</a> <b class="dot">&middot;</b> <a href="ijbman.html">
-    Manual</a> <b class="dot">&middot;</b> <a href="ijbfaq.html">
-    FAQ</a> <b class="dot">&middot;</b> <b>GPL</b></p>
-
-    <p class="sans"><small><small><a href="gpl.html#text">
-    Copyright</a> &copy; 1996-8 <a href=
-    "http://www.junkbusters.com/";>Junkbusters</a> <a href=
-    "http://www.junkbusters.com/ht/en/legal.html#marks";>&reg;</a>
-    Corporation. <a href="gpl.html#text">Copyright</a> &copy; 2001
-    <a href="http://sourceforge.net/projects/ijbswa/";>Jon
-    Foster</a>. Copying and distribution permitted under the <a
-    href="gpl.html">GNU</a> General Public License. The text of the
-    GNU GPL itself is copyrighted by the FSF, and may be copied but
-    not modified.</small></small></p>
-
-    <p><small><code><a href=
-    "http://sourceforge.net/projects/ijbswa/";>
-    http://sourceforge.net/projects/ijbswa/</a></code></small></p>
-  </body>
-</html>
-
diff --git a/external/privoxy/doc/pcrs.3 b/external/privoxy/doc/pcrs.3
deleted file mode 100644
index 59e0f22..0000000
--- a/external/privoxy/doc/pcrs.3
+++ /dev/null
@@ -1,488 +0,0 @@
-.\" Copyright (c) 2001-2003 Andreas S. Oesterhelt <oes@xxxxxxxxxxxxxx>
-.\"
-.\" This is free documentation; you can redistribute it and/or
-.\" modify it under the terms of the GNU General Public License as
-.\" published by the Free Software Foundation; either version 2 of
-.\" the License, or (at your option) any later version.
-.\"
-.\" The GNU General Public License's references to "object code"
-.\" and "executables" are to be interpreted as the output of any
-.\" document formatting or typesetting system, including
-.\" intermediate and printed output.
-.\"
-.\" This manual is distributed in the hope that it will be useful,
-.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-.\" GNU General Public License for more details.
-.\"
-.\" You should have received a copy of the GNU General Public
-.\" License along with this manual; if not, write to the Free
-.\" Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-.\" MA 02111, USA.
-.\"
-.TH PCRS 3 "2 December 2003" "pcrs-0.0.3"
-.SH NAME
-pcrs - Perl-compatible regular substitution.
-.SH SYNOPSIS
-.br
-.B "#include <pcrs.h>"
-.PP
-.br
-.BI "pcrs_job *pcrs_compile(const char *" pattern "," 
-.ti +5n
-.BI "const char *" substitute ", const char *" options ,
-.ti +5n
-.BI "int *" errptr );
-.PP
-.br
-.BI "pcrs_job *pcrs_compile_command(const char *" command ,
-.ti +5n
-.BI "int *" errptr );
-.PP
-.br
-.BI "int pcrs_execute(pcrs_job *" job ", char *" subject ,
-.ti +5n
-.BI "int " subject_length ", char **" result ,
-.ti +5n
-.BI "int *" result_length );
-.PP
-.br
-.BI "int pcrs_execute_list (pcrs_job *" joblist ", char *" subject ,
-.ti +5n
-.BI "int " subject_length ", char **" result ,
-.ti +5n
-.BI "int *" result_length );
-.PP
-.br
-.BI "pcrs_job *pcrs_free_job(pcrs_job *" job );
-.PP
-.br
-.BI "void pcrs_free_joblist(pcrs_job *" joblist );
-.PP
-.br
-.BI "char *pcrs_strerror(int " err );
-.PP
-.br
-
-.SH DESCRIPTION
-
-The
-.SM PCRS
-library is a supplement to the 
-.SB PCRE(3)
-library that implements
-.RB "regular expression based substitution, like provided by " Perl(1) "'s 's'"
-operator. It uses the same syntax and semantics as Perl 5, with just a few
-differences (see below).
-
-In a first step, the information on a substitution, i.e. the pattern, the
-substitute and the options are compiled from Perl syntax to an internal form
-.RB "called " pcrs_job " by using either the " pcrs_compile() " or " 
-.BR pcrs_compile_command() " functions."
-
-Once the job is compiled, it can be used on subjects, which are arbitrary 
-memory areas containing string or binary data, by calling
-.BR pcrs_execute() ". Jobs can be chained to joblists and whole"
-.RB "joblists can be applied to a subject using " pcrs_execute_list() .
-
-There are also convenience functions for freeing the jobs and for errno-to-string
-.RB "conversion, namely " pcrs_free_job() ", " pcrs_free_joblist() " and "
-.BR pcrs_strerror() .
-
-.SH COMPILING JOBS
-
-.RB "The function " pcrs_compile() " is called to compile a " pcrs_job
-.RI "from a " pattern ", " substitute " and " options " string."
-.RB "The resulting " "pcrs_job" " structure is dynamically allocated and it"
-.RB "is the caller's responsibility to call " "pcrs_free_job()" "  when it's no longer needed."
-
-.BR "pcrs_compile_command()" " is a convenience wrapper function that parses a Perl"
-.IR "command" " of the form"
-.BI "s/" "pattern" "/" "substitute" "/[" "options" "]"
-.RB "into its components and then calls " "pcrs_compile()" ". As in Perl, you"
-.RB "are not bound to the '" "/" "' character: Whatever"
-.RB "follows the '" "s" "' will be used as the delimiter. Patterns or substitutes"
-that contain the delimiter need to quote it:
-\fBs/th\\/is/th\\/at/\fR
-.RB "will replace " "th/is" " by " "th/at" " and can be written more simply as" 
-.BR "s|th/is|th/at|" "."
-
-.IR "pattern" ", " "substitute" ", " "options" " and " "command" " must be"
-.RI "zero-terminated C strings. " "substitute" " and " "options" " may be"
-.BR "NULL" ", in which case they are treated like the empty string."
-
-.SS "Return value and diagnostics"
-On success, both functions return a pointer to the compiled job.
-.RB "On failure, " "NULL"
-.RI "is returned. In that case, the pcrs error code is written to *" "err" "."
-
-.SS Patterns
-.RI "For the syntax of the " "pattern" ", see the "
-.BR "PCRE(3)" " manual page."
-
-.SS Substitutes
-.RI "The " "substitute" " uses"
-.RB "Perl syntax as documented in the " "perlre(1)" " manual page, with"
-some exceptions: 
-
-Most notably and evidently, since
-.SM PCRS
-is not Perl, variable interpolation or Perl command substitution won't work.
-Special variables that do get interpolated, are:
-.TP
-.B "$1, $2, ..., $n"
-Like in Perl, these variables refer to what the nth capturing subpattern
-in the pattern matched.
-.TP
-.B "$& and $0"
-.RB "refer to the whole match. Note that " "$0" " is deprecated in recent"
-Perl versions and now refers to the program name.
-.TP
-.B "$+"
-refers to what the last capturing subpattern matched.
-.TP
-.BR "$` and $'" " (backtick and tick)"
-.RI "refer to the areas of the " "subject" " before and after the match, respectively."
-.RB "Note that, like in Perl, the " "unmodified" " subject is used, even"
-if a global substitution previously matched.
-
-.PP
-Perl4-style references to subpattern matches of the form 
-\fB\\1, \\2, ...\fR
-.RB "which only exist in Perl5 for backwards compatibility, are " "not" 
-supported.
-
-Also, since the substitute is a double-quoted string in Perl, you
-might expect all Perl syntax for special characters to apply. In fact,
-only the following are supported:
-
-.TP
-\fB\\n\fR
-newline (0x0a)
-.TP
-\fB\\r\fR
-carriage return (0x0d)
-.TP
-\fB\\t\fR
-horizontal tab (0x09)
-.TP
-\fB\\f\fR
-form feed (0x0c)
-.TP
-\fB\\b\fR
-backspace (0x08)
-.TP
-\fB\\a\fR
-alarm, bell (0x07)
-.TP
-\fB\\e\fR
-escape (0x1b)
-.TP
-\fB\\0\fR
-binary zero (0x00)
-
-.SS "Options"
-.RB "The options " "gmisx" " are supported. " "e" " is not, since it would"
-.RB "require a Perl interpreter and neither is " o ", because the pattern
-is explicitly compiled, anyway. Additionally,
-.SM PCRS
-.RB "honors the options " "U" " and " "T" "."
-Where
-.SM PCRE
-.RB "options are mentioned below, refer to " PCRE(3) " for the subtle differences"
-to Perl behaviour.
-
-.TP
-.B g
-.RB "Replace " all " instances of"
-.IR pattern " in " subject ,
-not just the first one.
-
-.TP
-.B i
-.RI "Match the " pattern " without respect to case. This translates to"
-.SM PCRE_CASELESS.
-
-.TP
-.B m
-.RI "Treat the " subject " as consisting of multiple lines, i.e."
-.RB ' ^ "' matches immediately after, and '" $ "' immediately before each newline."
-Translates to
-.SM PCRE_MULTILINE.
-
-.TP
-.B s
-.RI "Treat the " subject " as consisting of one single line, i.e."
-.RB "let the scope of the '" . "' metacharacter include newlines."
-Translates to
-.SM PCRE_DOTALL.
-
-.TP
-.B x
-.RI "Allow extended regular expression syntax in the " pattern ","
-.RB "enabling whitespace and comments in complex patterns."
-Translates to
-.SM PCRE_EXTENDED.
-
-.TP
-.B U
-.RB "Switch the default behaviour of the '" * "' and '" + "' quantifiers"
-.RB "to ungreedy. Note that appending a '" ? "' switches back to greedy(!)."
-.RB "The explicit in-pattern switches " (?U) " and " (?-U) " remain unaffected."
-Translates to
-.SM PCRE_UNGREEDY.
-
-.TP
-.B T
-.RI "Consider the " substitute " trivial, i.e. do not interpret any references"
-or special character escape sequences in the substitute. Handy for large
-user-supplied substitutes, which would otherwise have to be examined and properly
-quoted.
-
-.PP
-Unsupported options are silently ignored.
-
-.SH EXECUTING JOBS
-
-.RI "Calling " pcrs_execute() " produces a modified copy of the " subject ", in which"
-.RB "the first (or all, if the '" g "' option was given when compiling the job)"
-.RI "occurance(s) of the job's " pattern " in the " subject " is replaced by the job's"
-.IR substitute .
-
-.RI "The first " subject_length " bytes following " subject " are processed, so"
-.RI  "a " subject_length " that exceeds the actual " subject " is dangerous."
-.RI "Note that for zero-terminated C strings, you should set " subject_length " to"
-.BI strlen( subject ) \fR,
-so that the dollar metacharacter matches at the end of the string, not after
-the string-terminating null byte. For convenience, an extra null byte is
-appended to the result so it can again be used as a string.
-
-.RI "The " subject " itself is left untouched, and the " *result " is dynamically"
-.RB "allocated, so it is the caller's responsibility to " free() " it when it's"
-no longer needed.
-
-.RI "The result's length (excluding the extra null byte) is written to " *result_length "."
-
-.RB "If the job matched, the " PCRS_SUCCESS " flag in"
-.IB job ->flags
-is set.
-
-
-.SS String subjects
-If your 
-
-.SS Return value and diagnostics
-
-.RB "On success, " pcrs_execute() " returns the number of substitutions that"
-were made, which is limited to 0 or 1 for non-global searches.
-.RI "On failure, a negative error code is returned and " result " is set"
-.RB "to " NULL .
-
-.SH FREEING JOBS
-.RB "It is not sufficient to call " free() " on a " pcrs_job ", because it "
-contains pointers to other dynamically allocated structures.
-.RB "Use " pcrs_free_job() " instead. It is safe to pass " NULL " pointers "
-.RB "(or pointers to invalid " pcrs_job "s that contain " NULL " pointers"
-.RB "to dependant structures) to " pcrs_free_job() "."
-
-.SS Return value
-.RB "The value of the job's " next " pointer."
-
-
-.SH CHAINING JOBS
-
-.SM PCRS
-.RB "supports to some extent the chaining of multiple " pcrs_job " structures by"
-.RB "means of their " next " member."
-
-Chaining the jobs is up to you, but once you have built a linked list of jobs,
-.RI "you can execute a whole " joblist " on a given subject by"
-.RB "a single call to " pcrs_execute_list() ", which will sequentially traverse"
-.RB "the linked list until it reaches a " NULL " pointer, and call " pcrs_execute() 
-.RI "for each job it encounters, feeding the " result  " and " result_length " of each"
-.RI "call into the next as the " subject " and " subject_length ". As in the single"
-.RI "job case, the original " subject " remains untouched, but all interim " result "s"
-.RB "are of course " free() "d. The return value is the accumulated number of matches"
-.RI "for all jobs in the " joblist "."
-.RI "Note that while this is handy, it reduces the diagnostic value of " err ", since "
-you won't know which job failed.
-
-.RI "In analogy, you can free all jobs in a given " joblist " by calling"
-.BR pcrs_free_joblist() .
-
-.SH QUOTING
-The quote character is (surprise!) '\fB\\\fR'. It quotes the delimiter in a
-.IR command ", the"
-.RB ' $ "' in  a"
-.IR substitute ", and, of course, itself. Note that the"
-.RB ' $ "' doesn't need to be quoted if it isn't followed by " [0-9+'`&] "."
-
-.RI "For quoting in the " pattern ", please refer to"
-.BR PCRE(3) .
-
-.SH DIAGNOSTICS
-
-.RB "When " compiling " a job either via the " pcrs_compile() " or " pcrs_compile_command()
-.RB "functions, you know that something went wrong when you are returned a " NULL " pointer."
-.RI "In that case, or in the event of non-fatal warnings, the integer pointed to by " err
-contains a nonzero error code, which is either a passed-through
-.SM PCRE
-error code or one generated by
-.SM PCRS.
-Under normal circumstances, it can take the following values:
-.TP
-.B PCRE_ERROR_NOMEMORY
-While compiling the pattern,
-.SM PCRE
-ran out of memory.
-.TP  
-.B  PCRS_ERR_NOMEM
-While compiling the job,
-.SM PCRS
-ran out of memory.
-.TP  
-.B  PCRS_ERR_CMDSYNTAX
-.BR pcrs_compile_command() " didn't find four tokens while parsing the"
-.IR command .
-.TP  
-.B  PCRS_ERR_STUDY
-A
-.SM PCRE
-.RB "error occured while studying the compiled pattern. Since " pcre_study()
-only provides textual diagnostic information, the details are lost.
-.TP  
-.B  PCRS_WARN_BADREF
-.RI "The " substitute " contains a reference to a capturing subpattern that"
-.RI "has a higher index than the number of capturing subpatterns in the " pattern
-or that exceeds the current hard limit of 33 (See LIMITATIONS below). As in Perl,
-this is non-fatal and results in substitutions with the empty string.
-
-.PP
-.RB "When " executing " jobs via " pcrs_execute() " or " pcrs_execute_list() ","
-.RI "a negative return code indicates an error. In that case, *" result
-.RB "is " NULL ". Possible error codes are:"
-.TP
-.B PCRE_ERROR_NOMEMORY
-While matching the pattern,
-.SM PCRE
-ran out of memory. This can only happen if there are more than 33 backrefrences
-.RI "in the " pattern "(!)"
-.BR and " memory is too tight to extend storage for more."
-.TP  
-.B  PCRS_ERR_NOMEM
-While executing the job,
-.SM PCRS
-ran out of memory.
-.TP  
-.B  PCRS_ERR_BADJOB
-.RB "The " pcrs_job "*  passed to " pcrs_execute " was NULL, or the"
-.RB "job is bogus (it contains " NULL " pointers to the compiled
-pattern, extra, or substitute).
-
-.PP
-If you see any other
-.SM PCRE
-error code passed through, you've either messed with the compiled job
-or found a bug in
-.SM PCRS.
-Please send me an email.
-
-.RB "Ah, and don't look for " PCRE_ERROR_NOMATCH ", since this"
-is not an error in the context of
-.SM PCRS.
-.RI "Should there be no match, an exact copy of the " subject " is"
-.RI "found at *" result " and the return code is 0 (matches)."
-
-All error codes can be translated into human readable text by means
-.RB "of the " pcrs_strerror() " function."
-
-
-.SH EXAMPLE
-A trivial command-line test program for
-.SM PCRS
-might look like:
-
-.nf
-#include <pcrs.h>
-#include <stdio.h>
-
-int main(int Argc, char **Argv)
-{
-   pcrs_job *job;
-   char *result;
-   size_t newsize;
-   int err;
-
-   if (Argc != 3)
-   {
-      fprintf(stderr, "Usage: %s s/pattern/substitute/[options]  subject\\n", Argv[0]);
-      return 1;
-   }
-
-   if (NULL == (job = pcrs_compile_command(Argv[1], &err)))
-   {
-      fprintf(stderr, "%s: compile error:  %s (%d).\\n", Argv[0], pcrs_strerror(err), err);
-   }
-
-   if (0 > (err = pcrs_execute(job, Argv[2], strlen(Argv[2]), &result, &newsize)))
-   {
-      fprintf(stderr, "%s: exec error:  %s (%d).\\n", Argv[0], pcrs_strerror(err), err);
-   }
-   else
-   {
-      printf("Result: *%s*\\n", result);
-      free(result);
-   }
-
-   pcrs_free_job(job);
-   return(err < 0);
-
-}
-
-.fi
-
-
-.SH LIMITATIONS
-The number of matches that a global job can have is only limited by the
-available memory. An initial storage for 40 matches is reserved, which
-is dynamically resized by the factor 1.6 whenever it is exhausted.
-
-The number of capturing subpatterns is currently limited to 33, which
-is a Bad Thing[tm]. It should be dynamically expanded until it reaches the
-.SM PCRE
-limit of 99.
-.br
-This limitation is particularly embarassing since
-.SM PCRE
-3.5 has raised the capturing subpattern limit to 65K.
-
-All of the above values can be adjusted in the "Capacity" section
-.RB "of " pcrs.h "."
-
-The Perl-style escape sequences for special characters \\\fInnn\fR,
-\\x\fInn\fR, and \\c\fIX\fR are currently unsupported.
-
-.SH BUGS
-This library has only been tested in the context of one application
-and should be considered high risk.
-
-.SH HISTORY
-.SM PCRS
-was originally written for the Privoxy project
-(http://www.privoxy.org/).
-
-.SH SEE ALSO
-.B PCRE(3), perl(1), perlre(1)
-
-.SH AUTHOR
-
-.SM PCRS
-is Copyright 2000 - 2003 by Andreas Oesterhelt <andreas@xxxxxxxxxxxxxx> and is
-licensed under the terms of the GNU Lesser General Public License (LGPL),
-version 2.1, which should be included in this distribution, with the exception
-that the permission to replace that license with the GNU General Public
-License (GPL) given in section 3 is restricted to version 2 of the GPL.
-
-If it is missing from this distribution, the LGPL can be obtained from
-http://www.gnu.org/licenses/lgpl.html or by mail: Write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
diff --git a/external/privoxy/doc/source/authors.sgml b/external/privoxy/doc/source/authors.sgml
deleted file mode 100644
index a810736..0000000
--- a/external/privoxy/doc/source/authors.sgml
+++ /dev/null
@@ -1,67 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/authors.sgml,v $
-
- Purpose     :  AUTHORS file for Privoxy
-                
- $Id: authors.sgml,v 2.11 2009/02/12 16:08:26 fabiankeil Exp $
-
- 
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. You have been warned!
- Failure to abide by this rule will result in the revocation of your license 
- to live a peaceful existence!
- ========================================================================
-
- ===================================================================
- READ: Document Note: This file generates the AUTHORS file in the 
- top level source directory. See p-authors.sgml for list of developers
- and contributors, etc. They were split from here for use in man page.
- ===================================================================
-
--->
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
-<!entity % dummy "IGNORE"> 
-<!entity authors SYSTEM "p-authors.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity % p-text "INCLUDE">           <!-- define we are a text only doc -->
-<!entity % p-authors-formal "INCLUDE"> <!-- include additional text, etc  -->
-]>
-
-<article id="index">
-
-<![%dummy;[
- <para>
- <comment>
-  This is here to keep vim syntax file from breaking :/
-  If I knew enough to fix it, I would.
-  PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
- </comment>
- </para>
-]]>
-
-<literallayout>
-              Authors of <application>Privoxy</application> v2.9.x and 3.x
-===========================================================================
-</literallayout>
-
-<!-- include boilerplate p-authors.sgml -->
- &authors;
-<!-- end boilerplate -->
-
-<para>
- If we've missed you off this list, please let us know!
-</para>
-
-<literallayout>
- Privoxy team. <ulink url="http://www.privoxy.org/";>http://www.privoxy.org/</ulink>
- <email>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</email>
-</literallayout>
-
-</article>
diff --git a/external/privoxy/doc/source/buildsource.sgml b/external/privoxy/doc/source/buildsource.sgml
deleted file mode 100644
index f8f5955..0000000
--- a/external/privoxy/doc/source/buildsource.sgml
+++ /dev/null
@@ -1,256 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/buildsource.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: buildsource.sgml,v 2.18 2009/02/23 09:03:12 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  user-manual
-  INSTALL
-
--->
-<para>
- To build <application>Privoxy</application> from source, 
- <ulink url="http://www.gnu.org/software/autoconf/autoconf.html";>autoconf</ulink>,
- <ulink
- url="http://www.gnu.org/software/make/make.html";>GNU make
- (gmake)</ulink>, and, of course, a C compiler like <ulink
- url="http://www.gnu.org/software/gcc/gcc.html";>gcc</ulink> are required.
-</para>
-
-<para>
- When building from a source tarball,
-<!-- 
- no longer available ...
- <ulink
- url="http://cvs.sourceforge.net/cvstarballs/ijbswa-cvsroot.tar.gz";>nightly CVS
- tarball</ulink>), 
---> first unpack the source: 
-</para>
-
-<para>
- <screen>
- tar xzvf privoxy-&p-version;<![%p-not-stable;[-beta]]><![%p-stable;[-stable]]>-src.tar.gz
- cd privoxy-&p-version;<![%p-not-stable;[-beta]]><![%p-stable;[-stable]]>
-</screen>
-</para>
-
-<para>
- For retrieving the current CVS sources, you'll need a CVS client installed.
- Note that sources from CVS are typically development quality, and may not be
- stable, or well tested. To download CVS source, check the Sourceforge
- documentation, which might give commands like:
-</para>
-
-<para>
- <screen>
-  cvs -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa login
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co current
-  cd current
-</screen>
-</para>
-
-<para>
- This will create a directory named <filename>current/</filename>, which will 
- contain the source tree.
-</para>
-
-<para>
- You can also check out any <application>Privoxy</application>
- <quote>branch</quote>, just exchange the <application>current</application>
- name with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs
- tree).
-</para>
-
-<para>
- It is also strongly recommended to not run <application>Privoxy</application>
- as root. You should configure/install/run <application>Privoxy</application> as
- an unprivileged user, preferably by  creating a <quote>privoxy</quote> user
- and group just for this purpose. See your local documentation for the correct
- command line to do add new users and groups (something like
- <command>adduser</command>, but the command syntax may vary from platform
- to platform). 
-</para>
-
-<para>
- <filename>/etc/passwd</filename> might then look like:
-</para>
-
-<para>
- <screen>  privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell</screen>
-</para>
-
-<para>
- And then <filename>/etc/group</filename>, like:
-</para>
-
-<para>
- <screen>  privoxy:*:7777:</screen>
-</para>
-
-<para>
- Some binary packages may do this for you.
-</para>
-
-<para>
- Then, to build from either unpacked tarball or CVS source:
-</para>
-
-<para>
- <screen>
- autoheader
- autoconf
- ./configure      # (--help to see options)
- make             # (the make from GNU, sometimes called gmake) 
- su               # Possibly required
- make -n install  # (to see where all the files will go)
- make -s install  # (to really install, -s to silence output)</screen>
-</para>
-
-<para>
-  Using GNU <command>make</command>, you can have the first four steps
-  automatically done for you by just typing:
-</para>
-
-<para>
- <screen>
-  make
-</screen>
-</para>
-
-<para>
-  in the freshly downloaded or unpacked source directory.
-</para>
-
-<para>
- To build an executable with security enhanced features so that 
- users cannot easily bypass the proxy (e.g. <quote>Go There Anyway</quote>), or
- alter their own configurations, <command>configure</command> like this:
-</para>
-<para>
- <screen>
- ./configure  --disable-toggle  --disable-editor  --disable-force</screen>
-</para> 
-<para>
-Then build as above. In Privoxy 3.0.7 and later, all of these options
-can also be disabled through the configuration file.
-</para>
-<para>
- <emphasis>WARNING:</emphasis> If installing as root, the install will fail
- unless a non-root user or group is specified, or a <literal>privoxy</literal>
- user and group already exist on the system. If a non-root user is specified,
- and no group, then the installation will try to also use a group of the same name
- as <quote>user</quote>. If a group is specified (and no user), then the
- support files will be installed as writable by that group, and owned by the
- user running the installation.
-</para>
-
-<para>
- <command>configure</command> accepts <literal>--with-user</literal> and
- <literal>--with-group</literal> options for setting user and group ownership
- of the configuration files (which need to be writable by the daemon). The
- specified <emphasis>user must already exist</emphasis>. When starting
- <application>Privoxy</application>, it must be run as this same user to
- insure write access to configuration and log files!
-</para>
-
-<para>
- Alternately, you can specify <literal>user</literal> and <literal>group</literal>
- on the <command>make</command> command line, but be sure both already exist:
-</para>
-
-<para>
- <screen>
- make -s install  USER=privoxy GROUP=privoxy</screen>
-</para>
-
-<para>
- The default installation path for <command>make install</command> is 
- <filename>/usr/local</filename>. This may of course be customized with 
- the various <command>./configure</command> path options. If you are doing 
- an install to anywhere besides <filename>/usr/local</filename>, be
- sure to set the appropriate paths with the correct configure options
- (<command>./configure --help</command>). Non-privileged users must of course
- have write access permissions to wherever the target installation is going.
-</para>
-
-<para>
- If you do install to <filename>/usr/local</filename>, the install will use
- <literal>sysconfdir=$prefix/etc/privoxy</literal> by default. All other
- destinations, and the direct usage of <literal>--sysconfdir</literal> flag
- behave like normal, i.e. will not add the extra <filename>privoxy</filename>
- directory. This is for a safer install, as there may already exist another
- program that uses a file with the <quote>config</quote> name, and thus makes
- <filename>/usr/local/etc</filename> cleaner.
-</para>
-
-<para>
- If installing to <filename>/usr/local</filename>, the documentation will go
- by default to <filename>$prefix/share/doc</filename>. But if this directory
- doesn't exist, it will then try <filename>$prefix/doc</filename> and install
- there before creating a new <filename>$prefix/share/doc</filename> just for
- <application>Privoxy</application>.
-</para>
-
-<para>
- Again, if the installs goes to <filename>/usr/local</filename>, the
- <literal>localstatedir</literal> (ie: <filename>var/</filename>) will default
- to <filename>/var</filename> instead of <literal>$prefix/var</literal> so
- the logs will go to <filename>/var/log/privoxy/</filename>, and the pid file
- will be created in <filename>/var/run/privoxy.pid</filename>. 
-</para>
-
-<para>
- <command>make install</command> will attempt to set the correct values 
- in <filename>config</filename> (main configuration file). You should  
- check this to make sure all values are correct. If appropriate,
- an init script will be installed, but it is up to the user to determine 
- how and where to start <application>Privoxy</application>. The init 
- script should be checked for correct paths and values, if anything other than
- a default install is done.
-</para>
-
-<para>
- If install finds previous versions of local configuration files, most of
- these will not be overwritten, and the new ones will be installed with a
- <quote>new</quote> extension. default.action and default.filter
- <emphasis>will be overwritten</emphasis>. You will then need
- to manually update the other installed configuration files as needed. The
- default template files <emphasis>will</emphasis> be overwritten. If you have
- customized, local templates, these should be stored safely in a separate
- directory and defined in <filename>config</filename> by the
- <quote>templdir</quote> directive. It is of course wise to always back-up any
- important configuration files <quote>just in case</quote>. If a previous
- version of <application>Privoxy</application> is already running, you will
- have to restart it manually.
-</para>
-
-<para>
- For more detailed instructions on how to build Redhat RPMs,
- Windows self-extracting installers, building on platforms with
- special requirements etc, please consult the <ulink
- url="http://www.privoxy.org/developer-manual/newrelease.html";>developer manual</ulink>.
-</para>
-
-<!-- print for README only -->
-<!-- Actually this is now in INSTALL -->
- <![%p-readme;[
-<para>
- The simplest command line to start <application>Privoxy</application> is 
- <command>$path/privoxy --user=privoxy  $path/etc/privoxy/config</command>. 
- See <command>privoxy --usage</command>, or the man page, for other options, 
- and configuration.
-</para>
-]]>
diff --git a/external/privoxy/doc/source/config.sgml b/external/privoxy/doc/source/config.sgml
deleted file mode 100644
index 472884c..0000000
--- a/external/privoxy/doc/source/config.sgml
+++ /dev/null
@@ -1,36 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[
-<!entity % dummy "IGNORE"> 
-<!entity config SYSTEM "p-config.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % user-man "IGNORE">
-<!entity % config-file "IGNORE">
-<!entity  my-app "<application>Privoxy</application>">
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/config.sgml,v $
-
- Purpose     :  config file generation
-                
- $Id: config.sgml,v 2.12 2009/02/12 16:08:26 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. 
- ========================================================================
-
- This file is used to generate the main Privoxy config file. It is mostly 
- content included from p-config.sgml (where all the data is). See that 
- file for more comments.
-
--->
-
-<article>
-<!-- include config.sgml -->
- &config;
-<!-- end include -->
-</article>
diff --git a/external/privoxy/doc/source/contacting.sgml b/external/privoxy/doc/source/contacting.sgml
deleted file mode 100644
index 96293f7..0000000
--- a/external/privoxy/doc/source/contacting.sgml
+++ /dev/null
@@ -1,262 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/contacting.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: contacting.sgml,v 2.14 2008/04/26 11:38:51 fabiankeil Exp $
-
- Copyright (C) 2001-2008 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- This file is included into:
-
-  faq
-  developer-manual
-  README
-  user-manual
-  webserver/index.sgml
-  announce.sgml
-
--->
-
-<!-- READ: -->
-<!-- Careful of the literallayout tags and finished formatting -->
-
-<para>
- We value your feedback. In fact, we rely on it to improve
- <application>Privoxy</application> and its configuration.
- However, please note the following hints, so we can 
- provide you with the best support:
-</para>
-
-<sect2 id="contact-support"><title>Get Support</title>
-<para>
- For casual users, our 
- <ulink url="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";>support forum at SourceForge</ulink>
- is probably best suited:
- <ulink url="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";>http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118</ulink>
-</para>
-
-<para>
- All users are of course welcome to discuss their issues on the <ulink
- url="http://lists.sourceforge.net/lists/listinfo/ijbswa-users";>users
- mailing list</ulink>, where the developers also hang around.
-</para>
-
-<para>
- Please don't sent private support requests to individual Privoxy
- developers, either use the mailing lists or the support trackers.
-</para>
-
-<para>
- Note that the Privoxy mailing lists are moderated. Posts from unsubscribed
- addresses have to be accepted manually by a moderator. This may cause a
- delay of several days and if you use a subject that doesn't clearly
- mention Privoxy or one of its features, your message may be accidentally
- discarded as spam.
-</para>
-
-<para>
- If you aren't subscribed, you should therefore spend a few seconds
- to come up with a proper subject. Additionally you should make it clear
- that you want to get CC'd. Otherwise some responses will be directed to
- the mailing list only, and you won't see them.
-</para>
-
-</sect2>
-
-<sect2 id="reporting"><title>Reporting Problems</title>
-<para>
-<quote>Problems</quote> for our purposes, come in two forms:
-</para>
- <itemizedlist>
-
-  <listitem>
-   <para>
-    Configuration issues, such as ads that slip through, or sites that 
-    don't function properly due to one <application>Privoxy</application> 
-    <quote>action</quote> or another being turned <quote>on</quote>.
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    <quote>Bugs</quote> in the programming code that makes up 
-    <application>Privoxy</application>, such as that might cause a crash.
-   </para>
-  </listitem> 
-</itemizedlist>
-
-
-<sect3 id="contact-ads"><title>Reporting Ads or Other Configuration Problems</title>
-<para>
- Please send feedback on ads that slipped through, innocent images that were
- blocked, sites that don't work properly, and other configuration related problem of 
- <filename>default.action</filename> file, to 
- <ulink url="http://sourceforge.net/tracker/?group_id=11118&amp;atid=460288";>
- http://sourceforge.net/tracker/?group_id=11118&amp;atid=460288</ulink>,
- the Actions File Tracker.
-</para> 
-
-<para>
- New, improved <filename>default.action</filename> files may occasionally be made
- available based on your feedback. These will be announced on the <ulink
- url="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce";>ijbswa-announce</ulink>
- list and available from our the <ulink
- url="http://sourceforge.net/project/showfiles.php?group_id=11118";>files section</ulink> of
- our <ulink url="http://sf.net/projects/ijbswa/";>project page</ulink>.
-</para>
-</sect3>
-
-
-<sect3 id="contact-bugs"><title>Reporting Bugs</title>
-<para>
- Please report all bugs through our bug tracker: 
- <ulink url="http://sourceforge.net/tracker/?group_id=11118&amp;atid=111118";>http://sourceforge.net/tracker/?group_id=11118&amp;atid=111118</ulink>. 
-</para>
-
-<para>
-  Before doing so, please make sure that the bug has <emphasis>not already been submitted</emphasis>
-  and observe the additional hints at the top of the <ulink
-  url="http://sourceforge.net/tracker/?func=add&amp;group_id=11118&amp;atid=111118";>submit
-  form</ulink>. If already submitted, please feel free to add any info to the 
-  original report that might help to solve the issue.
-</para>
-
-<para>
-  Please try to verify that it is a <application>Privoxy</application> bug,
-  and not a browser or site bug or documented behaviour that just happens
-  to be different than what you expected. If unsure,
-  try <ulink url="http://config.privoxy.org/toggle?set=disable";>toggling
-  off</ulink> <application>Privoxy</application>, and see if the problem persists.
-</para>
-
-<para>
-  If you are using your own custom configuration, please try
-  the stock configs to see if the problem is configuration related.
-  If you're having problems with a feature that is disabled by default,
-  please ask around on the mailing list if others can reproduce the problem.
-</para>
-
-<para>
-  If you aren't using the latest Privoxy version, the bug may have been found
-  and fixed in the meantime. We would appreciate if you could take the time
-  to <ulink url="http://www.privoxy.org/user-manual/installation.html";>upgrade
-  to the latest version</ulink> (or  even the latest CVS snapshot) and verify
-  that your bug still exists.
-</para>
-<para>
-Please be sure to provide the following information:
-</para>
-<para>
- <itemizedlist>
-
-  <listitem>
-   <para>
-    The exact <application>Privoxy</application> version you are using
-    (if you got the source from CVS, please also provide the source code revisions
-     as shown in <ulink url="http://config.privoxy.org/show-version";>http://config.privoxy.org/show-version</ulink>).
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    The operating system and versions you run
-    <application>Privoxy</application> on, (e.g. <application>Windows
-    XP SP2</application>), if you are using a Unix flavor,
-    sending the output of <quote>uname -a</quote> should do,
-    in case of GNU/Linux, please also name the distribution.
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    The name, platform, and version of the <application>browser</application> 
-    you were using (e.g. <application>Internet Explorer v5.5</application> for Mac).
-   </para>
-  </listitem>
-
-  <listitem>
-   <para>
-    The URL where the problem occurred, or some way for us to duplicate the
-    problem (e.g. <literal>http://somesite.example.com/?somethingelse=123</literal>). 
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    Whether your version of <application>Privoxy</application> is one supplied
-    by the <application>Privoxy</application> developers via SourceForge,
-    or if you got your copy somewhere else.
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    Whether you are using <application>Privoxy</application> in tandem with 
-    another proxy such as <application>Tor</application>. If so, please
-    temporary disable the other proxy to see if the symptoms change.
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    Whether you are using a personal firewall product. If so, does 
-    <application>Privoxy</application> work without it?
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    Any other pertinent information to help identify the problem such as config
-    or log file excerpts (yes, you should have log file entries for each
-    action taken).
-   </para>
-  </listitem> 
-
-</itemizedlist>
-</para>
-
-<para>
- You don't have to tell us your actual name when filing a problem
- report, but please use a nickname so we can differentiate between
- your messages and the ones entered by other "anonymous" users that
- may respond to your request if they have the same problem or already
- found a solution.
-</para>
-
-<para>
- Please also check the status of your request a few days after submitting
- it, as we may request additional information. If you use a SF id,
- you should automatically get a mail when someone responds to your request.
-</para>
-
-<para>
-  The <ulink url="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT";>appendix
-  of the Privoxy User Manual</ulink> also has helpful information 
-  on understanding <literal>actions</literal>, and <literal>action</literal> debugging. 
-</para>
-</sect3>
-</sect2>
-
-<sect2 id="contact-feature"><title>Request New Features</title>
-<para>
- You are welcome to submit ideas on new features or other proposals
- for improvement through our feature request tracker at
- <ulink url="http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118";>http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118</ulink>.
-</para>
-</sect2>
-
-<sect2 id="contact-other"><title>Other</title>
-<para>
-For any other issues, feel free to use the mailing lists. Technically interested users
-and people who wish to contribute to the project are also welcome on the developers list!
-You can find an overview of all <application>Privoxy</application>-related mailing lists,
-including list archives, at:
-<ulink url="http://sourceforge.net/mail/?group_id=11118";>http://sourceforge.net/mail/?group_id=11118</ulink>.
-</para>
-</sect2>
diff --git a/external/privoxy/doc/source/copyright.sgml b/external/privoxy/doc/source/copyright.sgml
deleted file mode 100644
index 01c978d..0000000
--- a/external/privoxy/doc/source/copyright.sgml
+++ /dev/null
@@ -1,47 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/copyright.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: copyright.sgml,v 2.10 2009/02/10 16:13:30 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  privoxy-man-page
-  user-manual
-  developer-manual
-  faq
-
- **************************************************************
- NOTE: the &my-copy entity must be defined in any file that will 
- include this file. (This is a workaround for docbook2man not 
- handling the standard &copy entity in the man page processing.)
- **************************************************************
-
--->
-
-<!--
- GFDL:
- http://www.gnu.org/licenses/fdl.html
--->
-
-<para>
- Copyright &my-copy; 2001-2009 by Privoxy Developers <email>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</email>
-</para>
-
-<para>
- Some source code is based on code Copyright &my-copy; 1997 by Anonymous Coders
- and Junkbusters, Inc. and licensed under the <citetitle>GNU General Public
- License</citetitle>.
-</para>
-
diff --git a/external/privoxy/doc/source/developer-manual.sgml b/external/privoxy/doc/source/developer-manual.sgml
deleted file mode 100644
index 0e1dc1f..0000000
--- a/external/privoxy/doc/source/developer-manual.sgml
+++ /dev/null
@@ -1,3304 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[
-<!entity % dummy "IGNORE"> 
-<!entity supported SYSTEM "supported.sgml">
-<!entity newfeatures SYSTEM "newfeatures.sgml">
-<!entity p-intro SYSTEM "privoxy.sgml">
-<!entity history SYSTEM "history.sgml">
-<!entity seealso SYSTEM "seealso.sgml">
-<!entity contacting SYSTEM "contacting.sgml">
-<!entity copyright SYSTEM "copyright.sgml">
-<!entity license SYSTEM "license.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity % p-text "IGNORE">        <!-- define we are not a text only doc -->
-<!entity % p-doc "INCLUDE">        <!-- and we are a formal doc           -->
-<!entity % seealso-extra "INCLUDE"> <!-- extra stuff from seealso.sgml    -->
-<!entity  my-copy "&copy;">        <!-- kludge for docbook2man            -->
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/developer-manual.sgml,v $
-
- Purpose     :  developer manual
-                This file belongs into
-                ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-                
- $Id: developer-manual.sgml,v 2.27 2009/02/19 02:20:22 hal9 Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. You have been warned!
- Failure to abide by this rule will result in the revocation of your license 
- to live a peaceful existence!
- ========================================================================
-
--->
-
-<article id="index">
-  <artheader>
-    <title>Privoxy Developer Manual</title>
-    <pubdate>
-     <subscript>
-    <!-- Completely the wrong markup, but very little is allowed  -->
-    <!-- in this part of an article. FIXME -->
-      <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by 
-      <ulink url="http://www.privoxy.org/";>Privoxy Developers</ulink>
-     </subscript>
-    </pubdate>
-
-
-    <pubdate>$Id: developer-manual.sgml,v 2.27 2009/02/19 02:20:22 hal9 Exp $</pubdate>
-
-<!--
-
-Note: this should generate a separate page, and a live link to it. 
-But it doesn't for some mysterious reason. Please leave commented
-unless it can be fixed proper. For the time being, the copyright 
-statement will be in copyright.smgl.
-
-Hal.
-
-<legalnotice id="legalnotice"> 
- <para>
-  text goes here ........
- </para>
-</legalnotice>
-
--->
-
-    <abstract>
-
-<![%dummy;[
- <para>
- <comment>
-  This is here to keep vim syntax file from breaking :/
-  If I knew enough to fix it, I would.
-  PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
- </comment>
- </para>
- ]]>
-<para>
- The developer manual provides guidance on coding, testing, packaging, documentation
- and other issues of importance to those involved with
- <application>Privoxy</application> development. It is mandatory (and helpful!) reading
- for anyone who wants to join the team. Note that it's currently out of date
- and may not be entirely correct. As always, patches are welcome.
-</para>
-
-<!-- Include privoxy.sgml boilerplate text: -->
-
-<!--  &p-intro; Someone interested enough in the project to contribute
-                will already know at this point what Privoxy is. -->
-
-<!-- end boilerplate -->
-
-<para>
- Please note that this document is constantly evolving. This copy represents
- the state at the release of version &p-version;.
- You can find the latest version of the this manual at <ulink
- url="http://www.privoxy.org/developer-manual/";>http://www.privoxy.org/developer-manual/</ulink>.
- Please see <link linkend="contact">the Contact section</link> 
- on how to contact the developers.
-</para>
-<!--        <para> -->
-<!--    Feel free to send a note to the developers at <email>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</email>. -->
-<!--   </para> -->
-
-    </abstract>
-  </artheader>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="introduction"><title>Introduction</title>
-<!--
-
- I don't like seeing blank space :) So added *something* here.
-
- --> 
-    <para>
-     <application>Privoxy</application>, as an heir to
-     <application>Junkbuster</application>, is a Free Software project 
-     and the code is licensed under the GNU General Public License version 2.
-     As such, <application>Privoxy</application> development is potentially open
-     to anyone who has the time, knowledge, and desire to contribute
-     in any capacity. Our goals are simply to continue the mission,
-     to improve <application>Privoxy</application>, and
-     to make it available to as wide an audience as possible. 
-    </para>
-    <para>
-     One does not have to be a programmer to contribute. Packaging, testing,
-     documenting and porting, are all important jobs as well.
-    </para>
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect2 id="quickstart"><title>Quickstart to Privoxy Development</title>
-   <para>
-    The first step is to join the <ulink
-      url="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";>developer's mailing list</ulink>.
-    You can submit your ideas, or even better patches. Patches are best 
-    submitted to the Sourceforge tracker set up for this purpose, but 
-    can be sent to the list for review too.
-   </para>
-    <para>
-     You will also need to have a cvs package installed, which will 
-     entail having ssh installed as well (which seems to be a requirement of
-     SourceForge), in order to access the cvs repository. Having the GNU build
-     tools is also going to be important (particularly, autoconf and gmake).
-    </para>
-    <para>
-      For the time being (read, this section is under construction), you can 
-      also refer to the extensive comments in the source code. In fact, 
-      reading the code is recommended in any case.
-    </para>
-   </sect2>
-  </sect1>
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="cvs"><title>The CVS Repository</title>
-    <para>
-      If you become part of the active development team, you will eventually
-      need write access to our holy grail, the CVS repository. One of the 
-      team members will need to set this up for you. Please read
-      this chapter completely before accessing via CVS.
-    </para>
-
-    <sect2 id="cvsaccess"><title>Access to CVS</title>
-      <para>
-        The project's CVS repository is hosted on
-        <ulink url="http://sourceforge.net/";>SourceForge.</ulink>
-        Please refer to the chapters 6 and 7 in
-        <ulink url="http://sourceforge.net/docman/?group_id=1";>SF's site
-        documentation</ulink> for the technical access details for your
-        operating system. For historical reasons, the CVS server is
-        called <literal>ijbswa.cvs.sourceforge.net</literal>, the repository is
-        called <literal>ijbswa</literal>, and the source tree module is called
-        <literal>current</literal>.
-      </para>
-    </sect2>
-
-    <sect2 id="cvsbranches">
-    <title>Branches</title>
-     <para>
-       Within the CVS repository, there are modules and branches. As
-       mentioned, the sources are in the <literal>current</literal>
-       <quote>module</quote>. Other modules are present for platform specific
-       issues. There is a webview of the CVS hierarchy at <ulink
-       url="http://ijbswa.cvs.sourceforge.net/ijbswa/";>http://ijbswa.cvs.sourceforge.net/ijbswa/</ulink>,
-       which might help with visualizing how these pieces fit together.
-     </para>
-     <para>
-       Branches are used to fork a sub-development path from the main trunk.
-       Within the <literal>current</literal> module where the sources are, there
-       is always at least one <quote>branch</quote> from the main trunk
-       devoted to a stable release series. The main trunk is where active
-       development takes place for the next stable series (e.g. 3.2.x).
-       So just prior to each stable series (e.g. 3.0.x), a branch is created
-       just for stable series releases (e.g. 3.0.0 -> 3.0.1 -> 3.0.2, etc).
-       Once the initial stable release of any stable branch has taken place,
-       this branch is <emphasis>only used for bugfixes</emphasis>, which have
-       had prior testing before being committed to CVS. (See <link
-       linkend="versionnumbers">Version Numbers</link> below for details on
-       versioning.)
-     </para>
-     <para>
-      At one time there were two distinct branches: stable and unstable. The
-      more drastic changes were to be in the unstable branch. These branches 
-      have now been merged to minimize time and effort of maintaining two 
-      branches.
-     </para>
-    <!-- 
-     <para>
-       This will result in at least two active branches, which means there may
-       be occasions that require the same (or similar) item to be 
-       checked into to two different places (assuming its a bugfix and needs 
-       fixing in both the stable and unstable trees). This also means that in
-       order to have access to both trees, both will have to be checked out 
-       separately. Use the <literal>cvs -r</literal> flag to check out a 
-       branch, e.g: <literal>cvs co -r v_3_0_branch current</literal>.
-     </para>
-    --> 
-    </sect2>
-
-    <sect2 id="cvscommit"><title>CVS Commit Guidelines</title>
-      <para>
-        The source tree is the heart of every software project. Every effort must
-        be made to ensure that it is readable, compilable and consistent at all
-        times. There are differing guidelines for the stable branch and the
-        main development trunk, and we ask anyone with CVS access to strictly
-        adhere to the following guidelines:
-      </para>
-      
-      <para>
-       Basic Guidelines, for all branches:
-      </para>
-      <para>
-        <itemizedlist>
-          <listitem><para>
-            Please don't commit even 
-            a small change without testing it thoroughly first. When we're
-            close to a public release, ask a fellow developer to review your 
-            changes.
-          </para></listitem>
-          <listitem><para>
-            Your commit message should give a concise overview of <emphasis>what you
-            changed</emphasis> (no big details) and <emphasis>why you changed it</emphasis>
-            Just check previous messages for good examples.
-          </para></listitem>
-          <listitem><para>
-            Don't use the same message on multiple files, unless it equally applies to
-            all those files.
-          </para></listitem>
-          <listitem><para>
-            If your changes span multiple files, and the code won't recompile unless
-            all changes are committed (e.g. when changing the signature of a function),
-            then commit all files one after another, without long delays in between.
-            If necessary, prepare the commit messages in advance.
-          </para></listitem>
-          <listitem><para>
-            Before changing things on CVS, make sure that your changes are in line
-            with the team's general consensus on what should be done.
-          </para></listitem>
-          <listitem>
-           <para>
-            Note that near a major public release, we get more cautious.
-            There is always the possibility to submit a patch to the <ulink
-            url="http://sourceforge.net/tracker/?atid=311118&amp;group_id=11118&amp;func=browse";>patch
-            tracker</ulink> instead.
-          </para>
-         </listitem> 
-        </itemizedlist>
-      </para>
-      
-<!--
-      <para>
-       Stable branches are handled with more care, especially after the 
-       initial *.*.0 release, and we are just in bugfix mode. In addition to 
-       the above, the below applies only to the stable branch (currently the 
-       <literal>v_3_0_branch</literal> branch):
-      </para>
-      
-      <para>
-       <itemizedlist>
-        <listitem>
-         <para>
-           Do not commit <emphasis>anything</emphasis> unless your proposed
-           changes have been well tested first, preferably by other members of the
-           project, or have prior approval of the project leaders or consensus
-           of the devel list.
-         </para>
-        </listitem> 
-       <listitem>
-        <para>
-         Where possible, bugfixes and changes should be tested in the main 
-         development trunk first. There may be occasions where this is not 
-         feasible, though.
-        </para>
-       </listitem> 
-       <listitem>
-        <para>
-          Alternately, proposed changes can be submitted as patches to the patch tracker on 
-          Sourceforge first: <ulink
-          url="http://sourceforge.net/tracker/?group_id=11118&#38;atid=311118";>http://sourceforge.net/tracker/?group_id=11118&#38;atid=311118</ulink>.
-          Then ask for peer review. 
-        </para>
-       </listitem> 
-        <listitem>
-         <para>
-          Do not even think about anything except bugfixes. No new features!
-         </para>
-        </listitem> 
-     
-       </itemizedlist>
-      </para> 
-    -->
-    </sect2>
-
-  </sect1>
-	
-  <!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="documentation"><title>Documentation Guidelines</title>
-  <para>
-    All formal documents are maintained in Docbook SGML and located in the
-    <computeroutput>doc/source/*</computeroutput> directory. You will need
-    <ulink url="http://www.docbook.org";>Docbook</ulink>, the Docbook 
-    DTD's and the Docbook modular stylesheets (or comparable alternatives),
-    and either <application>jade</application> or
-    <application>openjade</application> (recommended) installed in order to
-    build docs from source. Currently there is <ulink
-    url="../user-manual/index.html"><citetitle>user-manual</citetitle></ulink>,
-    <ulink url="../faq/index.html"><citetitle>FAQ</citetitle></ulink>, and, of
-    course this, the <citetitle>developer-manual</citetitle> in this format.
-    The <citetitle>README</citetitle>, <citetitle>AUTHORS</citetitle>,
-    <citetitle>INSTALL</citetitle>,
-    <citetitle>privoxy.1</citetitle> (man page), and
-    <citetitle>config</citetitle> files are also now maintained as Docbook
-    SGML. These files, when built, in the top-level source directory are
-    generated files! Also, the <application>Privoxy</application> <filename>index.html</filename> (and a 
-    variation on this file, <filename>privoxy-index.html</filename>, 
-    meant for inclusion with doc packages), are maintained as SGML as well.
-    <emphasis>DO NOT edit these directly</emphasis>. Edit the SGML source, or
-    contact someone involved in the documentation.
-    </para> 
-    <para>
-     <filename>config</filename> requires some special handling. The reason it
-     is maintained this way is so that the extensive comments in the file
-     mirror those in <citetitle>user-manual</citetitle>. But the conversion 
-     process requires going from SGML to HTML to text to special formatting 
-     required for the embedded comments. Some of this does not survive so
-     well. Especially some of the examples that are longer than 80 characters.
-     The build process for this file outputs to <filename>config.new</filename>, 
-     which should be reviewed for errors and mis-formatting. Once satisfied
-     that it is correct, then it should be hand copied to
-     <filename>config</filename>.
-    </para>
-    <para>
-     Other, less formal documents (e.g. <filename>LICENSE</filename>) are
-     maintained as plain text files in the top-level source directory.
-    </para>
-    <para>
-     Packagers are encouraged to include this documentation. For those without
-     the ability to build the docs locally, text versions of each are kept in
-     CVS. HTML versions are also being kept in CVS under 
-     <filename>doc/webserver/*</filename>. And PDF version are kept in 
-     <filename>doc/pdf/*</filename>.
-    </para>
-    <para>
-     Formal documents are built with the Makefile targets of
-     <computeroutput>make dok</computeroutput>, or alternately
-     <computeroutput>make redhat-dok</computeroutput>. If you have problems,
-     try both. The build process uses the document SGML sources in
-     <computeroutput>doc/source/*/*</computeroutput> to update all text files in
-     <computeroutput>doc/text/</computeroutput> and to update all HTML
-     documents in <computeroutput>doc/webserver/</computeroutput>.
-    </para>
-    <para>
-     Documentation writers should please make sure documents build
-     successfully before committing to CVS, if possible.
-    </para>
-    <para>
-     How do you update the webserver (i.e. the pages on privoxy.org)?
-     
-     <orderedlist numeration="arabic">
-      <listitem><para>
-        First, build the docs by running <computeroutput>make
-        dok</computeroutput> (or alternately <computeroutput>make
-        redhat-dok</computeroutput>). For PDF docs, do <computeroutput>make
-        dok-pdf</computeroutput>.
-      </para></listitem>
-      <listitem><para>
-        Run <computeroutput>make webserver</computeroutput> which copies all
-        files from <computeroutput>doc/webserver</computeroutput> to the
-        sourceforge webserver via scp.
-      </para></listitem>
-     </orderedlist>
-  </para>
-
-  <para>
-   Finished docs should be occasionally submitted to CVS
-   (<filename>doc/webserver/*/*.html</filename>) so that those without 
-   the ability to build them locally, have access to them if needed.
-   This is especially important just prior to a new release! Please
-   do this <emphasis>after</emphasis> the <literal>$VERSION</literal> and
-   other release specific data in <filename>configure.in</filename> has been
-   updated (this is done just prior to a new release).
-  </para>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="sgml">
-<title>Quickstart to Docbook and SGML</title>
-<para>
- If you are not familiar with SGML, it is a markup language similar to HTML. 
- Actually, not a mark up language per se, but a language used to define 
- markup languages. In fact, HTML is an SGML application. Both will use
- <quote>tags</quote> to format text and other content. SGML tags can be much
- more varied, and flexible, but do much of the same kinds of things. The tags,
- or <quote>elements</quote>, are definable in SGML. There is no set
- <quote>standards</quote>. Since we are using
- <application>Docbook</application>, our tags are those that are defined by 
- <application>Docbook</application>. Much of how the finish document is
- rendered is determined by the <quote>stylesheets</quote>.
- The stylesheets determine how each tag gets translated to HTML, or other
- formats.
-</para>
-
-<para>
- Tags in Docbook SGML need to be always <quote>closed</quote>. If not, you
- will likely generate errors. Example: <literal>&lt;title&gt;My
- Title&lt;/title&gt;</literal>. They are also case-insensitive, but we
- strongly suggest using all lower case. This keeps compatibility with
- [Docbook] <application>XML</application>.
-</para>
-
-<para>
- Our documents use <quote>sections</quote> for the most part. Sections
- will be processed into HTML headers (e.g. <literal>h1</literal> for 
- <literal>sect1</literal>). The <application>Docbook</application> stylesheets
- will use these to also generate the Table of Contents for each doc. Our 
- TOC's are set to a depth of three. Meaning <literal>sect1</literal>, 
- <literal>sect2</literal>, and <literal>sect3</literal> will have TOC 
- entries, but <literal>sect4</literal> will not. Each section requires 
- a <literal>&lt;title&gt;</literal> element, and at least one 
- <literal>&lt;para&gt;</literal>. There is a limit of five section 
- levels in Docbook, but generally three should be sufficient for our 
- purposes.
-</para>
-
-<para>
- Some common elements that you likely will use: 
-</para>
-
-<para>
-  <simplelist>
-    <member>
-      <emphasis>&lt;para&gt;&lt;/para&gt;</emphasis>, paragraph delimiter. Most 
-      text needs to be within paragraph elements (there are some exceptions).
-    </member>
-    <member>
-      <emphasis>&lt;emphasis&gt;&lt;/emphasis&gt;</emphasis>, the stylesheets
-      make this italics.
-    </member>
-    <member>
-      <emphasis>&lt;filename&gt;&lt;/filename&gt;</emphasis>, files and directories.
-    </member>
-    <member>
-      <emphasis>&lt;command&gt;&lt;/command&gt;</emphasis>, command examples.
-    </member>
-    <member>
-      <emphasis>&lt;literallayout&gt;&lt;/literallayout&gt;</emphasis>, like 
-      <literal>&lt;pre&gt;</literal>, more or less.
-    </member>
-    <member>
-      <emphasis>&lt;itemizedlist&gt;&lt;/itemizedlist&gt;</emphasis>, list with bullets.
-    </member>
-    <member>
-      <emphasis>&lt;listitem&gt;&lt;/listitem&gt;</emphasis>, member of the above.
-    </member>
-    <member>
-      <emphasis>&lt;screen&gt;&lt;/screen&gt;</emphasis>, screen output, implies 
-      <literal>&lt;literallayout&gt;</literal>.
-    </member>
-    <member>
-      <emphasis>&lt;ulink url="example.com"&gt;&lt;/ulink&gt;</emphasis>, like 
-      HTML <literal>&lt;a&gt;</literal> tag.
-    </member>
-    <member>
-      <emphasis>&lt;quote&gt;&lt;/quote&gt;</emphasis>, for, doh, quoting text. 
-    </member>
-  </simplelist>
-</para>
-
-<para>
- Look at any of the existing docs for examples of all these and more.
-</para>
-
-<para>
- You might also find <quote><ulink
- url="http://opensource.bureau-cornavin.com/crash-course/index.html";>Writing Documentation
- Using DocBook - A Crash Course</ulink></quote> useful.
-</para>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-  <sect2 id="docstyle">
-  <title><application>Privoxy</application> Documentation Style</title>
-   <para>
-    It will be easier if everyone follows a similar writing style. This 
-    just makes it easier to read what someone else has written if it 
-    is all done in a similar fashion.
-   </para>
-   <para>
-    Here it is:
-   </para>
-   <para>
-    <itemizedlist>
-     <listitem>
-      <para>
-       All tags should be lower case.
-      </para>
-    </listitem> 
-    <listitem>
-     <para>
-       Tags delimiting a <emphasis>block</emphasis> of text (even small
-       blocks) should be on their own line. Like:
-       <literallayout>
- &lt;para&gt;
-  Some text goes here.
- &lt;/para&gt;
-       </literallayout>
-       Tags marking individual words, or few words, should be in-line:
-       <literallayout>
-  Just to &lt;emphasis&gt;emphasize&lt;/emphasis&gt;, some text goes here.
-       </literallayout>
-     </para>
-   </listitem> 
-   <listitem>
-    <para>
-      Tags should be nested and step indented for block text like: (except
-      in-line tags) 
-     <literallayout>
- &lt;para&gt;
-  &lt;itemizedlist&gt;
-   &lt;para&gt;
-    &lt;listitem&gt;
-      Some text goes here in our list example.
-     &lt;/listitem&gt;
-   &lt;/para&gt;
-  &lt;/itemizedlist&gt;
- &lt;/para&gt;
-       </literallayout>
-      This makes it easier to find the text amongst the tags ;-)
-    </para>
-   </listitem> 
-   <listitem>
-    <para>
-     Use white space to separate logical divisions within a document, 
-     like between sections. Running everything together consistently 
-     makes it harder to read and work on.
-    </para>
-   </listitem> 
-   <listitem>
-    <para>
-     Do not hesitate to make comments. Comments can either use the 
-     &lt;comment&gt; element, or the &lt;!--  --&gt; style comment 
-     familiar from HTML. (Note in Docbook v4.x &lt;comment&gt; is 
-     replaced by &lt;remark&gt;.)
-    </para>
-  </listitem> 
-  <listitem>
-   <para>
-     We have an international audience. Refrain from slang, or English 
-     idiosyncrasies (too many to list :). Humor also does not translate 
-     well sometimes.
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    Try to keep overall line lengths in source files to 80 characters or less
-    for obvious reasons. This is not always possible, with lengthy URLs for
-    instance.
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    Our documents are available in differing formats. Right now, they 
-    are just plain text, HTML, and PDF, but others are always a 
-    future possibility. Be careful with URLs (&lt;ulink&gt;), and avoid 
-    this mistake:
-   </para>
-   <para>
-     My favorite site is &lt;ulink url="http://example.com"&gt;here&lt;/ulink&gt;.
-   </para>
-   <para>
-     This will render as <quote>My favorite site is here</quote>, which is 
-     not real helpful in a text doc. Better like this:
-   </para>
-   <para>
-     My favorite site is &lt;ulink url="http://example.com"&gt;example.com&lt;/ulink&gt;.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    All documents should be spell checked occasionally.
-    <application>aspell</application> can check SGML with the
-    <literal>-H</literal> option. (<application>ispell</application> I think
-    too.)
-   </para>
-  </listitem> 
-
-  </itemizedlist>
- </para> 
-  
-  </sect2>
-
-  
- <!--   ~~~~~       New section      ~~~~~     -->
-
- <sect2><title>Privoxy Custom Entities</title>
- <para>
-  <application>Privoxy</application> documentation is using 
-  a number of customized <quote>entities</quote> to facilitate 
-  documentation maintenance. 
- </para>
- <para>
-  We are using a set of <quote>boilerplate</quote> files with generic text,
-  that is used by multiple docs. This way we can write something once, and use
-  it repeatedly without having to re-write the same content over and over again.
-  If editing such a file, keep in mind that it should be
-  <emphasis>generic</emphasis>. That is the purpose; so it can be used in varying 
-  contexts without additional modifications.
- </para>
- <para>
-  We are also using what <application>Docbook</application> calls 
-  <quote>internal entities</quote>. These are like variables in 
-  programming. Well, sort of. For instance, we have the
-  <literal>p-version</literal> entity that contains the current 
-  <application>Privoxy</application> version string. You are strongly 
-  encouraged to use these where possible. Some of these obviously 
-  require re-setting with each release (done by the Makefile). A sampling of
-  custom entities are listed below. See any of the main docs for examples.
- </para>
-
- <para>
-  <itemizedlist>
-  <listitem>
-   <para>
-    Re- <quote>boilerplate</quote> text entities are defined like:
-   </para>
-   <para>
-    <literal>&lt;!entity supported SYSTEM "supported.sgml"&gt;</literal>
-   </para>
-   <para>
-     In this example, the contents of the file,
-     <filename>supported.sgml</filename> is available for inclusion anywhere 
-     in the doc. To make this happen, just reference the now defined 
-     entity: <literal>&#38;supported;</literal> (starts with an ampersand 
-     and ends with a semi-colon), and the contents will be dumped into 
-     the finished doc at that point.
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    Commonly used <quote>internal entities</quote>:
-  </para>
-  <simplelist>
-   <member>
-    <emphasis>p-version</emphasis>: the <application>Privoxy</application> 
-    version string, e.g. <quote>&p-version;</quote>.
-   </member>
-   <member>
-    <emphasis>p-status</emphasis>: the project status, either 
-    <quote>alpha</quote>, <quote>beta</quote>, or <quote>stable</quote>.
-   </member>
-   <member>
-    <emphasis>p-not-stable</emphasis>: use to conditionally include 
-    text in <quote>not stable</quote> releases (e.g. <quote>beta</quote>).
-   </member>
-   <member>
-    <emphasis>p-stable</emphasis>: just the opposite.
-   </member>
-   <member>
-    <emphasis>p-text</emphasis>: this doc is only generated as text.
-   </member>
-  </simplelist>
- </listitem> 
- </itemizedlist>
- </para> 
- <para>
-  There are others in various places that are defined for a specific 
-  purpose. Read the source!
- </para>
- 
- </sect2>
-  
- </sect1>
-
-<!--     <listitem><para>be consistent with the redirect script (i.e. the <application>Privoxy</application> program -->
-<!--       points via the redirect URL at sf to valid end-points in the document)</para></listitem> -->
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="coding"><title>Coding Guidelines</title>
-
-    <sect2 id="s1"><title>Introduction</title>
-
-    <para>This set of standards is designed to make our lives easier.  It is
-    developed with the simple goal of helping us keep the "new and improved
-    <application>Privoxy</application>" consistent and reliable. Thus making
-    maintenance easier and increasing chances of success of the
-    project.</para>
-
-    <para>And that of course comes back to us as individuals. If we can
-    increase our development and product efficiencies then we can solve more
-    of the request for changes/improvements and in general feel good about
-    ourselves. ;-></para>
-
-  </sect2>
-
-    <sect2 id="s2"><title>Using Comments</title>
- 
-
-    <sect3 id="s3"><title>Comment, Comment, Comment</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Comment as much as possible without commenting the obvious.
-    For example do not comment "variable_a is equal to variable_b".
-    Instead explain why variable_a should be equal to the variable_b.
-    Just because a person can read code does not mean they will
-    understand why or what is being done. A reader may spend a lot
-    more time figuring out what is going on when a simple comment
-    or explanation would have prevented the extra research. Please
-    help your brother IJB'ers out!</para>
-
-    <para>The comments will also help justify the intent of the code.
-    If the comment describes something different than what the code
-    is doing then maybe a programming error is occurring.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-/* if page size greater than 1k ... */
-if ( page_length() > 1024 )
-{
-    ... "block" the page up ...
-}
-
-/* if page size is small, send it in blocks */
-if ( page_length() > 1024 )
-{
-    ... "block" the page up ...
-}
-
-This demonstrates 2 cases of "what not to do".  The first is a
-"syntax comment".  The second is a comment that does not fit what
-is actually being done.
-</programlisting>
-  </sect3>
-
-    
-
-    <sect3 id="s4"><title>Use blocks for comments</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Comments can help or they can clutter. They help when they
-    are differentiated from the code they describe. One line
-    comments do not offer effective separation between the comment
-    and the code. Block identifiers do, by surrounding the code
-    with a clear, definable pattern.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-/*********************************************************************
- * This will stand out clearly in your code!
- *********************************************************************/
-if ( this_variable == that_variable )
-{
-   do_something_very_important();
-}
-
-
-/* unfortunately, this may not */
-if ( this_variable == that_variable )
-{
-   do_something_very_important();
-}
-
-
-if ( this_variable == that_variable ) /* this may not either */
-{
-   do_something_very_important();
-}</programlisting>
-
-    <para><emphasis>Exception:</emphasis></para>
-
-    <para>If you are trying to add a small logic comment and do not
-    wish to "disrupt" the flow of the code, feel free to use a 1
-    line comment which is NOT on the same line as the code.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s5"><title>Keep Comments on their own line</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>It goes back to the question of readability. If the comment
-    is on the same line as the code it will be harder to read than
-    the comment that is on its own line.</para>
-
-    <para>There are three exceptions to this rule, which should be
-    violated freely and often: during the definition of variables,
-    at the end of closing braces, when used to comment
-    parameters.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-/*********************************************************************
- * This will stand out clearly in your code,
- * But the second example won't.
- *********************************************************************/
-if ( this_variable == this_variable )
-{
-   do_something_very_important();
-}
-
-if ( this_variable == this_variable ) /*can you see me?*/
-{
-   do_something_very_important(); /*not easily*/
-}
-
-
-/*********************************************************************
- * But, the encouraged exceptions:
- *********************************************************************/
-int urls_read     = 0;     /* # of urls read + rejected */
-int urls_rejected = 0;     /* # of urls rejected */
-
-if ( 1 == X )
-{
-   do_something_very_important();
-}
-
-
-short do_something_very_important(
-   short firstparam,   /* represents something */
-   short nextparam     /* represents something else */ )
-{
-   ...code here...
-
-}   /* -END- do_something_very_important */
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s6"><title>Comment each logical step</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Logical steps should be commented to help others follow the
-    intent of the written code and comments will make the code more
-    readable.</para>
-
-    <para>If you have 25 lines of code without a comment, you should
-    probably go back into it to see where you forgot to put
-    one.</para>
-
-    <para>Most "for", "while", "do", etc... loops _probably_ need a
-    comment. After all, these are usually major logic
-    containers.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s7"><title>Comment All Functions Thoroughly</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>A reader of the code should be able to look at the comments
-    just prior to the beginning of a function and discern the
-    reason for its existence and the consequences of using it. The
-    reader should not have to read through the code to determine if
-    a given function is safe for a desired use. The proper
-    information thoroughly presented at the introduction of a
-    function not only saves time for subsequent maintenance or
-    debugging, it more importantly aids in code reuse by allowing a
-    user to determine the safety and applicability of any function
-    for the problem at hand. As a result of such benefits, all
-    functions should contain the information presented in the
-    addendum section of this document.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s8"><title>Comment at the end of braces if the
-    content is more than one screen length</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Each closing brace should be followed on the same line by a
-    comment that describes the origination of the brace if the
-    original brace is off of the screen, or otherwise far away from
-    the closing brace. This will simplify the debugging,
-    maintenance, and readability of the code.</para>
-
-    <para>As a suggestion , use the following flags to make the
-    comment and its brace more readable:</para>
-
-    <para>use following a closing brace: } /* -END- if() or while ()
-    or etc... */</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-if ( 1 == X )
-{
-   do_something_very_important();
-   ...some long list of commands...
-} /* -END- if x is 1 */
-
-or:
-
-if ( 1 == X )
-{
-   do_something_very_important();
-   ...some long list of commands...
-} /* -END- if ( 1 == X ) */
-</programlisting>
-  </sect3>
-    
-  </sect2>
-
-    <sect2 id="s9"><title>Naming Conventions</title>
-
-    
-
-    <sect3 id="s10"><title>Variable Names</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Use all lowercase, and separate words via an underscore
-    ('_'). Do not start an identifier with an underscore. (ANSI C
-    reserves these for use by the compiler and system headers.) Do
-    not use identifiers which are reserved in ANSI C++. (E.g.
-    template, class, true, false, ...). This is in case we ever
-    decide to port Privoxy to C++.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-int ms_iis5_hack = 0;</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>
-<programlisting>
-int msiis5hack = 0; int msIis5Hack = 0;
-</programlisting>
-</para>
-
-    
-
-  </sect3>    
-
-    <sect3 id="s11"><title>Function Names</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Use all lowercase, and separate words via an underscore
-    ('_'). Do not start an identifier with an underscore. (ANSI C
-    reserves these for use by the compiler and system headers.) Do
-    not use identifiers which are reserved in ANSI C++. (E.g.
-    template, class, true, false, ...). This is in case we ever
-    decide to port Privoxy to C++.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-int load_some_file( struct client_state *csp )</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>
-<programlisting>
-int loadsomefile( struct client_state *csp )
-int loadSomeFile( struct client_state *csp )
-</programlisting>
-</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s12"><title>Header file prototypes</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Use a descriptive parameter name in the function prototype
-    in header files. Use the same parameter name in the header file
-    that you use in the c file.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-(.h) extern int load_aclfile( struct client_state *csp );
-(.c) int load_aclfile( struct client_state *csp )</programlisting>
-
-    <para><emphasis>Instead of:</emphasis>
-<programlisting>
-(.h) extern int load_aclfile( struct client_state * ); or 
-(.h) extern int load_aclfile(); 
-(.c) int load_aclfile( struct client_state *csp )
-</programlisting>
-</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s13"><title>Enumerations, and #defines</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Use all capital letters, with underscores between words. Do
-    not start an identifier with an underscore. (ANSI C reserves
-    these for use by the compiler and system headers.)</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-(enumeration) : enum Boolean { FALSE, TRUE };
-(#define) : #define DEFAULT_SIZE 100;</programlisting>
-
-    <para><emphasis>Note:</emphasis> We have a standard naming scheme for #defines
-    that toggle a feature in the preprocessor: FEATURE_>, where
-    > is a short (preferably 1 or 2 word) description.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-#define FEATURE_FORCE 1
-
-#ifdef FEATURE_FORCE
-#define FORCE_PREFIX blah
-#endif /* def FEATURE_FORCE */
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s14"><title>Constants</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Spell common words out entirely (do not remove vowels).</para>
-
-    <para>Use only widely-known domain acronyms and abbreviations.
-    Capitalize all letters of an acronym.</para>
-
-    <para>Use underscore (_) to separate adjacent acronyms and
-    abbreviations. Never terminate a name with an underscore.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-#define USE_IMAGE_LIST 1</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>
-<programlisting>
-#define USE_IMG_LST 1 or 
-#define _USE_IMAGE_LIST 1 or
-#define USE_IMAGE_LIST_ 1 or 
-#define use_image_list 1 or
-#define UseImageList 1
-</programlisting>
-</para>
-
-    
-  </sect3>
-
-  </sect2>
-    
-
-    <sect2 id="s15"><title>Using Space</title>
-
-    
-
-    <sect3 id="s16"><title>Put braces on a line by themselves.</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>The brace needs to be on a line all by itself, not at the
-    end of the statement. Curly braces should line up with the
-    construct that they're associated with. This practice makes it
-    easier to identify the opening and closing braces for a
-    block.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-if ( this == that )
-{
-   ...
-}</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>if ( this == that ) { ... }</para>
-
-    <para>or</para>
-
-    <para>if ( this == that ) { ... }</para>
-
-    <para><emphasis>Note:</emphasis> In the special case that the if-statement is
-    inside a loop, and it is trivial, i.e. it tests for a
-    condition that is obvious from the purpose of the block,
-    one-liners as above may optically preserve the loop structure
-    and make it easier to read.</para>
-
-    <para><emphasis>Status:</emphasis> developer-discretion.</para>
-
-    <para><emphasis>Example exception:</emphasis></para>
-<programlisting>
-while ( more lines are read )
-{
-   /* Please document what is/is not a comment line here */
-   if ( it's a comment ) continue;
-
-   do_something( line );
-}
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s17"><title>ALL control statements should have a
-    block</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Using braces to make a block will make your code more
-    readable and less prone to error. All control statements should
-    have a block defined.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-if ( this == that )
-{
-   do_something();
-   do_something_else();
-}</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>if ( this == that ) do_something(); do_something_else();</para>
-
-    <para>or</para>
-
-    <para>if ( this == that ) do_something();</para>
-
-    <para><emphasis>Note:</emphasis> The first example in "Instead of" will execute
-    in a manner other than that which the developer desired (per
-    indentation). Using code braces would have prevented this
-    "feature". The "explanation" and "exception" from the point
-    above also applies.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s18"><title>Do not belabor/blow-up boolean
-    expressions</title>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-structure->flag = ( condition );</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>if ( condition ) { structure->flag = 1; } else {
-    structure->flag = 0; }</para>
-
-    <para><emphasis>Note:</emphasis> The former is readable and concise. The later
-    is wordy and inefficient. Please assume that any developer new
-    to the project has at least a "good" knowledge of C/C++. (Hope
-    I do not offend by that last comment ... 8-)</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s19"><title>Use white space freely because it is
-    free</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Make it readable. The notable exception to using white space
-    freely is listed in the next guideline.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-int first_value   = 0;
-int some_value    = 0;
-int another_value = 0;
-int this_variable = 0;
-
-if ( this_variable == this_variable )
-
-first_value = old_value + ( ( some_value - another_value ) - whatever )
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s20"><title>Don't use white space around structure
-    operators</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>- structure pointer operator ( "->" ) - member operator (
-    "." ) - functions and parentheses</para>
-
-    <para>It is a general coding practice to put pointers, references,
-    and function parentheses next to names. With spaces, the
-    connection between the object and variable/function name is not
-    as clear.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-a_struct->a_member;
-a_struct.a_member;
-function_name();</programlisting>
-
-    <para><emphasis>Instead of:</emphasis> a_struct -> a_member; a_struct . a_member;
-    function_name ();</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s21"><title>Make the last brace of a function stand
-    out</title>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-int function1( ... )
-{
-   ...code...
-   return( ret_code );
-
-}   /* -END- function1 */
-
-
-int function2( ... )
-{
-}   /* -END- function2 */
-</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>int function1( ... ) { ...code... return( ret_code ); } int
-    function2( ... ) { }</para>
-
-    <para><emphasis>Note:</emphasis> Use 1 blank line before the closing brace and 2
-    lines afterward. This makes the end of function standout to
-    the most casual viewer. Although function comments help
-    separate functions, this is still a good coding practice. In
-    fact, I follow these rules when using blocks in "for", "while",
-    "do" loops, and long if {} statements too. After all whitespace
-    is free!</para>
-
-    <para><emphasis>Status:</emphasis> developer-discretion on the number of blank
-    lines. Enforced is the end of function comments.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s22"><title>Use 3 character indentions</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>If some use 8 character TABs and some use 3 character TABs,
-    the code can look *very* ragged. So use 3 character indentions
-    only. If you like to use TABs, pass your code through a filter
-    such as "expand -t3" before checking in your code.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-static const char * const url_code_map[256] =
-{
-   NULL, ...
-};
-
-
-int function1( ... )
-{
-   if ( 1 )
-   {
-      return( ALWAYS_TRUE );
-   }
-   else
-   {
-      return( HOW_DID_YOU_GET_HERE );
-   }
-
-   return( NEVER_GETS_HERE );
-
-}
-</programlisting>
-  </sect3>
-
-  </sect2>
-    
-
-    <sect2 id="s23"><title>Initializing</title>
-
-    
-
-    <sect3 id="s24"><title>Initialize all variables</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Do not assume that the variables declared will not be used
-    until after they have been assigned a value somewhere else in
-    the code. Remove the chance of accidentally using an unassigned
-    variable.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-short a_short = 0;
-float a_float  = 0;
-struct *ptr = NULL;</programlisting>
-
-    <para><emphasis>Note:</emphasis> It is much easier to debug a SIGSEGV if the
-    message says you are trying to access memory address 00000000
-    and not 129FA012; or array_ptr[20] causes a SIGSEV vs.
-    array_ptr[0].</para>
-
-    <para><emphasis>Status:</emphasis> developer-discretion if and only if the
-    variable is assigned a value "shortly after" declaration.</para>
-
-  </sect3>
-  </sect2>
-    
-
-    <sect2 id="s25"><title>Functions</title>
-
-    
-
-    <sect3 id="s26"><title>Name functions that return a boolean as a
-    question.</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Value should be phrased as a question that would logically
-    be answered as a true or false statement</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-should_we_block_this();
-contains_an_image();
-is_web_page_blank();
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s27"><title>Always specify a return type for a
-    function.</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>The default return for a function is an int. To avoid
-    ambiguity, create a return for a function when the return has a
-    purpose, and create a void return type if the function does not
-    need to return anything.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s28"><title>Minimize function calls when iterating by
-    using variables</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>It is easy to write the following code, and a clear argument
-    can be made that the code is easy to understand:</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-for ( size_t cnt = 0; cnt &lt; block_list_length(); cnt++ )
-{
-   ....
-}</programlisting>
-
-    <para><emphasis>Note:</emphasis> Unfortunately, this makes a function call for
-    each and every iteration. This increases the overhead in the
-    program, because the compiler has to look up the function each
-    time, call it, and return a value. Depending on what occurs in
-    the block_list_length() call, it might even be creating and
-    destroying structures with each iteration, even though in each
-    case it is comparing "cnt" to the same value, over and over.
-    Remember too - even a call to block_list_length() is a function
-    call, with the same overhead.</para>
-
-    <para>Instead of using a function call during the iterations,
-    assign the value to a variable, and evaluate using the
-    variable.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-size_t len = block_list_length();
-
-for ( size_t cnt = 0; cnt &lt; len; cnt++ )
-{
-   ....
-}</programlisting>
-
-    <para><emphasis>Exceptions:</emphasis> if the value of block_list_length()
-    *may* change or could *potentially* change, then you must code the
-    function call in the for/while loop.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s29"><title>Pass and Return by Const Reference</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>This allows a developer to define a const pointer and call
-    your function. If your function does not have the const
-    keyword, we may not be able to use your function. Consider
-    strcmp, if it were defined as: extern int strcmp( char *s1,
-    char *s2 );</para>
-
-    <para>I could then not use it to compare argv's in main: int main(
-    int argc, const char *argv[] ) { strcmp( argv[0], "privoxy"
-    ); }</para>
-
-    <para>Both these pointers are *const*! If the c runtime library
-    maintainers do it, we should too.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s30"><title>Pass and Return by Value</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Most structures cannot fit onto a normal stack entry (i.e.
-    they are not 4 bytes or less). Aka, a function declaration
-    like: int load_aclfile( struct client_state csp )</para>
-
-    <para>would not work. So, to be consistent, we should declare all
-    prototypes with "pass by value": int load_aclfile( struct
-    client_state *csp )</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s31"><title>Names of include files</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Your include statements should contain the file name without
-    a path. The path should be listed in the Makefile, using -I as
-    processor directive to search the indicated paths. An exception
-    to this would be for some proprietary software that utilizes a
-    partial path to distinguish their header files from system or
-    other header files.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-#include &lt;iostream.h&gt;     /* This is not a local include */
-#include "config.h"       /* This IS a local include */
-</programlisting>
-
-    <para><emphasis>Exception:</emphasis></para>
-
-    <para>
-<programlisting>
-/* This is not a local include, but requires a path element. */ 
-#include &lt;sys/fileName.h&gt;
-</programlisting>
-</para>
-
-    <para><emphasis>Note:</emphasis> Please! do not add "-I." to the Makefile
-    without a _very_ good reason. This duplicates the #include
-    "file.h" behavior.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s32"><title>Provide multiple inclusion
-    protection</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Prevents compiler and linker errors resulting from
-    redefinition of items.</para>
-
-    <para>Wrap each header file with the following syntax to prevent
-    multiple inclusions of the file. Of course, replace PROJECT_H
-    with your file name, with "." Changed to "_", and make it
-    uppercase.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-#ifndef PROJECT_H_INCLUDED
-#define PROJECT_H_INCLUDED
- ...
-#endif /* ndef PROJECT_H_INCLUDED */
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s33"><title>Use `extern "C"` when appropriate</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>If our headers are included from C++, they must declare our
-    functions as `extern "C"`. This has no cost in C, but increases
-    the potential re-usability of our code.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-#ifdef __cplusplus
-extern "C"
-{
-#endif /* def __cplusplus */
-
-... function definitions here ...
-
-#ifdef __cplusplus
-}
-#endif /* def __cplusplus */
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s34"><title>Where Possible, Use Forward Struct
-    Declaration Instead of Includes</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Useful in headers that include pointers to other struct's.
-    Modifications to excess header files may cause needless
-    compiles.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-/*********************************************************************
- * We're avoiding an include statement here!
- *********************************************************************/
-struct file_list;
-extern file_list *xyz;</programlisting>
-
-    <para><emphasis>Note:</emphasis> If you declare "file_list xyz;" (without the
-    pointer), then including the proper header file is necessary.
-    If you only want to prototype a pointer, however, the header
-    file is unnecessary.</para>
-
-    <para><emphasis>Status:</emphasis> Use with discretion.</para>
-
-    
-  </sect3>
-  </sect2>
-
-    <sect2 id="s35"><title>General Coding Practices</title>
-
-    
-
-    <sect3 id="s36"><title>Turn on warnings</title>
-
-    <para><emphasis>Explanation</emphasis></para>
-
-    <para>Compiler warnings are meant to help you find bugs. You
-    should turn on as many as possible. With GCC, the switch is
-    "-Wall". Try and fix as many warnings as possible.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s37"><title>Provide a default case for all switch
-    statements</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>What you think is guaranteed is never really guaranteed. The
-    value that you don't think you need to check is the one that
-    someday will be passed. So, to protect yourself from the
-    unknown, always have a default step in a switch statement.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-switch( hash_string( cmd ) )
-{
-   case hash_actions_file :
-      ... code ...
-      break;
-
-   case hash_confdir :
-      ... code ...
-      break;
-
-   default :
-      log_error( ... );
-      ... anomaly code goes here ...
-      continue; / break; / exit( 1 ); / etc ...
-
-} /* end switch( hash_string( cmd ) ) */</programlisting>
-
-    <para><emphasis>Note:</emphasis> If you already have a default condition, you
-    are obviously exempt from this point. Of note, most of the
-    WIN32 code calls `DefWindowProc' after the switch statement.
-    This API call *should* be included in a default statement.</para>
-
-    <para><emphasis>Another Note:</emphasis> This is not so much a readability issue
-    as a robust programming issue. The "anomaly code goes here" may
-    be no more than a print to the STDERR stream (as in
-    load_config). Or it may really be an abort condition.</para>
-
-    <para><emphasis>Status:</emphasis> Programmer discretion is advised.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s38"><title>Try to avoid falling through cases in a
-    switch statement.</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>In general, you will want to have a 'break' statement within
-    each 'case' of a switch statement. This allows for the code to
-    be more readable and understandable, and furthermore can
-    prevent unwanted surprises if someone else later gets creative
-    and moves the code around.</para>
-
-    <para>The language allows you to plan the fall through from one
-    case statement to another simply by omitting the break
-    statement within the case statement. This feature does have
-    benefits, but should only be used in rare cases. In general,
-    use a break statement for each case statement.</para>
-
-    <para>If you choose to allow fall through, you should comment both
-    the fact of the fall through and reason why you felt it was
-    necessary.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s39"><title>Use 'long' or 'short' Instead of
-    'int'</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>On 32-bit platforms, int usually has the range of long. On
-    16-bit platforms, int has the range of short.</para>
-
-    <para><emphasis>Status:</emphasis> open-to-debate. In the case of most FSF
-    projects (including X/GNU-Emacs), there are typedefs to int4,
-    int8, int16, (or equivalence ... I forget the exact typedefs
-    now). Should we add these to IJB now that we have a "configure"
-    script?</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s40"><title>Don't mix size_t and other types</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>The type of size_t varies across platforms. Do not make
-    assumptions about whether it is signed or unsigned, or about
-    how long it is. Do not compare a size_t against another
-    variable of a different type (or even against a constant)
-    without casting one of the values.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s41"><title>Declare each variable and struct on its
-    own line.</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>It can be tempting to declare a series of variables all on
-    one line. Don't.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-long a = 0;
-long b = 0;
-long c = 0;</programlisting>
-
-    <para><emphasis>Instead of:</emphasis></para>
-
-    <para>long a, b, c;</para>
-
-    <para><emphasis>Explanation:</emphasis> - there is more room for comments on the
-    individual variables - easier to add new variables without
-    messing up the original ones - when searching on a variable to
-    find its type, there is less clutter to "visually"
-    eliminate</para>
-
-    <para><emphasis>Exceptions:</emphasis> when you want to declare a bunch of loop
-    variables or other trivial variables; feel free to declare them
-    on one line. You should, although, provide a good comment on
-    their functions.</para>
-
-    <para><emphasis>Status:</emphasis> developer-discretion.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s42"><title>Use malloc/zalloc sparingly</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>Create a local struct (on the stack) if the variable will
-    live and die within the context of one function call.</para>
-
-    <para>Only "malloc" a struct (on the heap) if the variable's life
-    will extend beyond the context of one function call.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-If a function creates a struct and stores a pointer to it in a
-list, then it should definitely be allocated via `malloc'.
-</programlisting>
-  </sect3>
-    
-
-    <sect3 id="s43"><title>The Programmer Who Uses 'malloc' is
-    Responsible for Ensuring 'free'</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>If you have to "malloc" an instance, you are responsible for
-    insuring that the instance is `free'd, even if the deallocation
-    event falls within some other programmer's code. You are also
-    responsible for ensuring that deletion is timely (i.e. not too
-    soon, not too late). This is known as "low-coupling" and is a
-    "good thing (tm)". You may need to offer a
-    free/unload/destructor type function to accommodate this.</para>
-
-    <para><emphasis>Example:</emphasis></para>
-<programlisting>
-int load_re_filterfile( struct client_state *csp ) { ... }
-static void unload_re_filterfile( void *f ) { ... }</programlisting>
-
-    <para><emphasis>Exceptions:</emphasis></para>
-
-    <para>The developer cannot be expected to provide `free'ing
-    functions for C run-time library functions ... such as
-    `strdup'.</para>
-
-    <para><emphasis>Status:</emphasis> developer-discretion. The "main" use of this
-    standard is for allocating and freeing data structures (complex
-    or nested).</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s44"><title>Add loaders to the `file_list' structure
-    and in order</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>I have ordered all of the "blocker" file code to be in alpha
-    order. It is easier to add/read new blockers when you expect a
-    certain order.</para>
-
-    <para><emphasis>Note:</emphasis> It may appear that the alpha order is broken in
-    places by POPUP tests coming before PCRS tests. But since
-    POPUPs can also be referred to as KILLPOPUPs, it is clear that
-    it should come first.</para>
-
-    
-  </sect3>
-    
-
-    <sect3 id="s45"><title>"Uncertain" new code and/or changes to
-    existing code, use FIXME or XXX</title>
-
-    <para><emphasis>Explanation:</emphasis></para>
-
-    <para>If you have enough confidence in new code or confidence in
-    your changes, but are not *quite* sure of the repercussions,
-    add this:</para>
-
-    <para>/* FIXME: this code has a logic error on platform XYZ, *
-    attempting to fix */ #ifdef PLATFORM ...changed code here...
-    #endif</para>
-
-    <para>or:</para>
-
-    <para>/* FIXME: I think the original author really meant this...
-    */ ...changed code here...</para>
-
-    <para>or:</para>
-
-    <para>/* FIXME: new code that *may* break something else... */
-    ...new code here...</para>
-
-    <para><emphasis>Note:</emphasis> If you make it clear that this may or may not
-    be a "good thing (tm)", it will be easier to identify and
-    include in the project (or conversely exclude from the
-    project).</para>
-
-    
-  </sect3>
-
-  </sect2>
-
-    <sect2 id="s46"><title>Addendum: Template for files and function
-    comment blocks:</title>
-
-    <para><emphasis>Example for file comments:</emphasis></para>
-<programlisting>
-const char FILENAME_rcs[] = "$I<!-- Break CVS Substitution -->d$";
-/*********************************************************************
- *
- * File        :  $S<!-- Break CVS Substitution -->ource$
- *
- * Purpose     :  (Fill me in with a good description!)
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009
- *                the Privoxy team. http://www.privoxy.org/
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 ,
- *                USA
- *
- * Revisions   :
- *    $L<!-- Break CVS Substitution -->og$
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-   ...necessary include files for us to do our work...
-
-const char FILENAME_h_rcs[] = FILENAME_H_VERSION;
-</programlisting>
-
-    <para><emphasis>Note:</emphasis> This declares the rcs variables that should be
-    added to the "show-proxy-args" page. If this is a brand new
-    creation by you, you are free to change the "Copyright" section
-    to represent the rights you wish to maintain.</para>
-
-    <para><emphasis>Note:</emphasis> The formfeed character that is present right
-    after the comment flower box is handy for (X|GNU)Emacs users to
-    skip the verbiage and get to the heart of the code (via
-    `forward-page' and `backward-page'). Please include it if you
-    can.</para>
-
-    <para><emphasis>Example for file header comments:</emphasis></para>
-<programlisting>
-#ifndef _FILENAME_H
-#define _FILENAME_H
-#define FILENAME_H_VERSION "$I<!-- Break CVS Substitution -->d$"
-/*********************************************************************
- *
- * File        :  $S<!-- Break CVS Substitution -->ource$
- *
- * Purpose     :  (Fill me in with a good description!)
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009
- *                the Privoxy team. http://www.privoxy.org/
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 ,
- *                USA
- *
- * Revisions   :
- *    $L<!-- Break CVS Substitution -->og$
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-   ... function headers here ...
-
-
-/* Revision control strings from this header and associated .c file */
-extern const char FILENAME_rcs[];
-extern const char FILENAME_h_rcs[];
-
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef _FILENAME_H */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
-</programlisting>
-
-    <para><emphasis>Example for function comments:</emphasis></para>
-<programlisting>
-/*********************************************************************
- *
- * Function    :  FUNCTION_NAME
- *
- * Description :  (Fill me in with a good description!)
- *
- * parameters  :
- *          1  :  param1 = pointer to an important thing
- *          2  :  x      = pointer to something else
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int FUNCTION_NAME( void *param1, const char *x )
-{
-   ...
-   return( 0 );
-
-}
-</programlisting>
-
-    <para><emphasis>Note:</emphasis> If we all follow this practice, we should be
-    able to parse our code to create a "self-documenting" web
-    page.</para>
-
-  </sect2>
-
-  </sect1>
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="testing"><title>Testing Guidelines</title>
-    <para>To be filled.
-</para>
-
-    <!--   ~~~~~       New section      ~~~~~     -->
-    <sect2 id="testing-plan"><title>Testplan for releases</title>
-      <para>
-       Explain release numbers. major, minor. developer releases. etc.
-
-<orderedlist numeration="arabic">
-          <listitem><para>
-Remove any existing rpm with rpm -e
-</para></listitem>
-          <listitem><para>
-Remove any file that was left over. This includes (but is not limited to)
-      <itemizedlist>
-                <listitem><para>/var/log/privoxy</para></listitem>
-                <listitem><para>/etc/privoxy</para></listitem>
-                <listitem><para>/usr/sbin/privoxy</para></listitem>
-                <listitem><para>/etc/init.d/privoxy</para></listitem>
-                <listitem><para>/usr/doc/privoxy*</para></listitem>
-              </itemizedlist>
-</para></listitem>
-          <listitem><para>
-Install the rpm. Any error messages?
-</para></listitem>
-          <listitem><para>start,stop,status <application>Privoxy</application> with the specific script
-      (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does
-      autostart work?</para></listitem>
-          <listitem><para>Start browsing. Does <application>Privoxy</application> work? Logfile written?</para></listitem>
-          <listitem><para>Remove the rpm. Any error messages? All files removed?</para></listitem>
-        </orderedlist>
-</para>
-    </sect2>
-
-    <!--   ~~~~~       New section      ~~~~~     -->
-    <sect2 id="testing-report"><title>Test reports</title>
-      <para>
-Please submit test reports only with the <ulink url="http://sourceforge.net/tracker/?func=add&amp;group_id=11118&amp;atid=395005";>test form</ulink>
-at sourceforge. Three simple steps:
-        <itemizedlist>
-          
-          <listitem><para>Select category: the distribution you test on.</para></listitem>
-          <listitem><para>Select group: the version of <application>Privoxy</application> that we are about to release.</para></listitem>
-          <listitem><para>Fill the Summary and Detailed Description with something
-              intelligent (keep it short and precise).</para>
-          </listitem>
-        </itemizedlist>
-        Do not mail to the mailing list (we cannot keep track on issues there).
-      </para>
-    </sect2>
-    
-  </sect1>
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="newrelease"><title>Releasing a New Version</title>
-    <para>
-        When we release versions of <application>Privoxy</application>,
-        our work leaves our cozy secret lab and has to work in the cold
-        RealWorld[tm]. Once it is released, there is no way to call it
-        back, so it is very important that great care is taken to ensure
-        that everything runs fine, and not to introduce problems in the
-        very last minute.
-    </para>
-    <para>
-        So when releasing a new version, please adhere exactly to the
-        procedure outlined in this chapter.
-    </para>
-
-    <para>
-	The following programs are required to follow this process:
-	<filename>ncftpput</filename> (ncftp), <filename>scp, ssh</filename> (ssh),
-        <filename>gmake</filename> (GNU's version of make), autoconf, cvs.
-    </para>
-
-    <sect2 id="versionnumbers">
-    <title>Version numbers</title>
-
-    <para>
-      First you need to determine which version number the release will have. 
-      <application>Privoxy</application> version numbers consist of three numbers,
-      separated by dots, like in X.Y.Z (e.g. 3.0.0), where:
-        <itemizedlist>
-          <listitem>
-            <para>
-              X, the version major, is rarely ever changed. It is increased by one if
-              turning a development branch into stable substantially changes the functionality,
-              user interface or configuration syntax. Majors 1 and 2 were 
-              <application>Junkbuster</application>, and 3 will be the first stable
-              <application>Privoxy</application> release.
-            </para>
-          </listitem>
-          <listitem>
-            <para>
-              Y, the version minor, represents the branch within the major version.
-              At any point in time, there are two branches being maintained:
-              The stable branch, with an even minor, say, 2N, in which no functionality is
-              being added and only bug-fixes are made, and 2N+1, the development branch, in
-              which the further development of <application>Privoxy</application> takes
-              place.
-              This enables us to turn the code upside down and inside out, while at the same time
-              providing and maintaining a stable version.
-              The minor is reset to zero (and one) when the major is incremented. When a development
-              branch has matured to the point where it can be turned into stable, the old stable branch
-              2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the
-              new stable branch 2N+2, and a new development branch 2N+3 is opened.
-            </para>
-          </listitem>
-          <listitem>
-            <para>
-              Z, the point or sub version, represents a release of the software within a branch.
-              It is therefore incremented immediately before each code freeze. 
-              In development branches, only the even point versions correspond to actual releases,
-              while the odd ones denote the evolving state of the sources on CVS in between.
-              It follows that Z is odd on CVS in development branches most of the time. There, it gets
-              increased to an even number immediately before a code freeze, and is increased to an odd
-              number again immediately thereafter.
-              This ensures that builds from CVS snapshots are easily distinguished from released versions.
-              The point version is reset to zero when the minor changes.
-            </para>
-            <para>
-              Stable branches work a little differently, since there should be
-              little to no development happening in such branches. Remember,
-              only bugfixes, which presumably should have had some testing
-              before being committed. Stable branches will then have their 
-              version reported as <literal>0.0.0</literal>, during that period 
-              between releases when changes are being added. This is to denote 
-              that this code is <emphasis>not for release</emphasis>. Then 
-              as the release nears, the version is bumped according: e.g. 
-              <literal>3.0.1 -> 0.0.0 -> 3.0.2</literal>.
-            </para>
-          </listitem>
-        </itemizedlist>
-    </para>
-    <para>
-     In summary, the main CVS trunk is the development branch where new
-     features are being worked on for the next stable series. This should
-     almost always be where the most activity takes place. There is always at
-     least one stable branch from the trunk, e.g now it is
-     <literal>3.0</literal>, which is only used to release stable versions.
-     Once the initial *.0 release of the stable branch has been done, then as a
-     rule, only bugfixes that have had prior testing should be committed to
-     the stable branch. Once there are enough bugfixes to justify a new
-     release, the version of this branch is again incremented Example: 3.0.0
-     -> 3.0.1 -> 3.0.2, etc are all stable releases from within the stable
-     branch. 3.1.x is currently the main trunk, and where work on 3.2.x is
-     taking place. If any questions, please post to the devel list
-     <emphasis>before</emphasis> committing to a stable branch!
-    </para>
-    <para>
-     Developers should remember too that if they commit a bugfix to the stable 
-     branch, this will more than likely require a separate submission to the 
-     main trunk, since these are separate development trees within CVS. If you 
-     are working on both, then this would require at least two separate check
-     outs (i.e main trunk, <emphasis>and</emphasis> the stable release branch,
-     which is <literal>v_3_0_branch</literal> at the moment).
-    </para>
-
-    </sect2>
-     
-    <sect2 id="beforerelease">
-    <title>Before the Release: Freeze</title>
-     <para>
-       The following <emphasis>must be done by one of the
-       developers</emphasis> prior to each new release.
-     </para>
-     <para>
-      <itemizedlist>
-       <listitem>
-        <para>
-         Make sure that everybody who has worked on the code in the last
-         couple of days has had a chance to yell <quote>no!</quote> in case
-         they have pending changes/fixes in their pipelines. Announce the
-         freeze so that nobody will interfere with last minute changes.
-        </para>
-      </listitem> 
-      <listitem>
-       <para>
-         Increment the version number (point from odd to even in development
-         branches!) in <filename>configure.in</filename>. (RPM spec files 
-         will need to be incremented as well.)
-       </para>
-      </listitem> 
-      <listitem>
-       <para>
-        If <filename>default.action</filename> has changed since last
-        release (i.e. software release or standalone actions file release),
-        bump up its version info to A.B in this line:
-       </para>
-       <para> 
-        <programlisting>
-  {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
-</programlisting>
-       </para>
-       <para> 
-        Then change the version info in doc/webserver/actions/index.php,
-        line: '$required_actions_file_version = "A.B";'
-       </para>
-      </listitem>
-      <listitem>
-       <para>
-        All documentation should be rebuild after the version bump.
-        Finished docs should be then be committed to CVS (for those 
-        without the ability to build these). Some docs may require 
-        rather obscure processing tools. <filename>config</filename>,
-        the man page (and the html version of the man page), and the PDF docs
-        fall in this category. REAMDE, the man page, AUTHORS, and config
-        should all also be committed to CVS for other packagers. The 
-        formal docs should be uploaded to the webserver. See the
-        Section "Updating the webserver" in this manual for details.
-       </para>
-      </listitem> 
-      <listitem>
-       <para>
-         The <citetitle>User Manual</citetitle> is also used for context 
-         sensitive help for the CGI editor. This is version sensitive, so that
-         the user will get appropriate help for his/her release. So with 
-         each release a fresh version should be uploaded to the webserver
-         (this is in addition to the main <citetitle>User Manual</citetitle>
-         link from the main page since we need to keep manuals for various 
-         versions available). The CGI pages will link to something like 
-         <literal>http://privoxy.org/$(VERSION)/user-manual/</literal>. This
-         will need to be updated for each new release. There is no Makefile
-         target for this at this time!!! It needs to be done manually.
-       </para>
-      </listitem> 
-      <listitem>
-       <para>
-        All developers should look at the <filename>ChangeLog</filename> and
-        make sure noteworthy changes are referenced.
-       </para>
-     </listitem> 
-      <listitem>
-       <para>
-        <emphasis>Commit all files that were changed in the above steps!</emphasis>
-       </para>
-      </listitem>
-      <listitem>
-       <para>
-        Tag all files in CVS with the version number with
-        <quote><command>cvs tag v_X_Y_Z</command></quote>.
-        Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc.
-       </para>
-      </listitem> 
-     <listitem>
-       <para>
-        If the release was in a development branch, increase the point version
-        from even to odd (X.Y.(Z+1)) again in <filename>configure.in</filename> and
-        commit your change.
-       </para>
-      </listitem> 
-     <listitem>
-       <para>
-        On the webserver, copy the user manual to a new top-level directory
-        called <filename>X.Y.Z</filename>. This ensures that help links from the CGI
-        pages, which have the version as a prefix, will go into the right version of the manual.
-        If this is a development branch release, also symlink <filename>X.Y.(Z-1)</filename>
-        to <filename>X.Y.Z</filename> and <filename>X.Y.(Z+1)</filename> to
-        <filename>.</filename> (i.e. dot). 
-       </para>
-      </listitem> 
-      </itemizedlist>
-     </para> 
-    </sect2>
-    
-    <sect2 id="therelease">
-    <title>Building and Releasing the Packages</title>
-     <para>
-      Now the individual packages can be built and released. Note that for
-      GPL reasons the first package to be released is always the source tarball.
-     </para>
- 
-     <para>
-      For <emphasis>all</emphasis> types of packages, including the source tarball,
-      <emphasis>you must make sure that you build from clean sources by exporting
-      the right version from CVS into an empty directory</emphasis> (just press return when
-      asked for a password):
-     </para>
-      
-     <para>
-      <programlisting>
-  mkdir dist # delete or choose different name if it already exists
-  cd dist
-  cvs -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa login
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa export -r v_X_Y_Z current
-</programlisting>
-    </para>
-  
-    <para>
-     <emphasis>Do NOT change</emphasis> a single bit, including, but not limited to
-     version information after export from CVS. This is to make sure that
-     all release packages, and with them, all future bug reports, are based
-     on exactly the same code.
-    </para>
-  
-    <warning>
-     <para>
-      Every significant release of Privoxy has included at least one 
-      package that either had incorrect versions of files, missing files, 
-      or incidental leftovers from a previous build process that gave 
-      unknown numbers of users headaches to try to figure out what was 
-      wrong. PLEASE, make sure you are using pristene sources, and are
-      following the prescribed process!
-     </para>
-    </warning>
-
-    <para>
-     Please find additional instructions for the source tarball and the
-     individual platform dependent binary packages below. And details 
-     on the Sourceforge release process below that.
-    </para>
-
-    <sect3 id="pack-guidelines">
-    <title>Note on Privoxy Packaging</title>
-     <para>
-      Please keep these general guidelines in mind when putting together 
-      your package. These apply to <emphasis>all</emphasis> platforms!
-     </para>
-     <para>
-      <itemizedlist>
-       <listitem>
-        <para>
-          <application>Privoxy</application> <emphasis>requires</emphasis>
-          write access to: all <filename>*.action</filename> files, all 
-          logfiles, and the <filename>trust</filename> file. You will 
-          need to determine the best way to do this for your platform.
-        </para>
-       </listitem> 
-       <listitem>
-        <para>
-          Please include up to date documentation. At a bare minimum:
-        </para>
-        <simplelist>
-         <member>
-          <filename>LICENSE</filename> (top-level directory)
-         </member>
-        </simplelist>
-        <simplelist>
-         <member>
-          <filename>README</filename> (top-level directory)
-         </member>
-        </simplelist>
-        <simplelist>
-         <member>
-          <filename>AUTHORS</filename> (top-level directory)
-         </member>
-        </simplelist>
-        <simplelist>
-         <member>
-          <filename>man page</filename> (top-level directory, Unix-like
-          platforms only)
-         </member>
-        </simplelist>
-        <simplelist>
-         <member>
-          <filename>The User Manual</filename> (doc/webserver/user-manual/)
-         </member>
-        </simplelist>
-        <simplelist>
-         <member>
-          <filename>FAQ</filename> (doc/webserver/faq/)
-         </member>
-        </simplelist>
-        <para>
-          Also suggested: <filename>Developer Manual</filename>
-          (doc/webserver/developer-manual) and <filename>ChangeLog</filename>
-          (top-level directory). <filename>FAQ</filename> and the manuals are
-          HTML docs. There are also text versions in
-          <filename>doc/text/</filename> which could conceivably also be
-          included.
-        </para>
-        <para>
-         The documentation has been designed such that the manuals are linked
-         to each other from parallel directories, and should be packaged 
-         that way. <filename>privoxy-index.html</filename> can also be
-         included and can serve as a focal point for docs and other links of
-         interest (and possibly renamed to <filename>index.html</filename>).
-         This should be one level up from the manuals. There is a link also 
-         on this page to an HTMLized version of the man page. To avoid 404 for
-         this, it is in CVS as
-         <filename>doc/webserver/man-page/privoxy-man-page.html</filename>,
-         and should be included along with the manuals. There is also a
-         css stylesheets that can be included for better presentation:
-         <filename>p_doc.css</filename>. This should be in the same directory
-         with <filename>privoxy-index.html</filename>, (i.e. one level up from
-         the manual directories).
-        </para>
-      </listitem> 
-      <listitem>
-       <para>
-        <filename>user.action</filename> and <filename>user.filter</filename>
-        are designed for local preferences. Make sure these do not get overwritten!
-        <filename>config</filename> should not be overwritten either. This 
-        has especially important configuration data in it.
-        <filename>trust</filename> should be left in tact as well.
-       </para>
-      </listitem> 
-      <listitem>
-       <para>
-        Other configuration files (<filename>default.action</filename> and
-        <filename>default.filter</filename>) should be installed as the new
-        defaults, but all previously installed configuration files should be
-        preserved as backups. This is just good manners :-) These files are
-        likely to change between releases and contain important new features
-        and bug fixes.
-       </para>
-     </listitem> 
-     <listitem>
-      <para>
-       Please check platform specific notes in this doc, if you haven't 
-       done <quote>Privoxy</quote> packaging before for other platform 
-       specific issues. Conversely, please add any notes that you know 
-       are important for your platform (or contact one of the doc 
-       maintainers to do this if you can't).
-      </para>
-    </listitem> 
-    <listitem>
-     <para>
-       Packagers should do a <quote>clean</quote> install of their 
-       package after building it. So any previous installs should be 
-       removed first to ensure the integrity of the newly built package. 
-       Then run the package for a while to make sure there are no 
-       obvious problems, before uploading.
-     </para>
-    </listitem> 
-
-      </itemizedlist>
-     </para> 
-    
-    </sect3>
-
-    <sect3 id="newrelease-tarball"><title>Source Tarball</title>
-        <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then do:
-	</para>
-	<para>
-	<programlisting>
-  make tarball-dist
-</programlisting>
-	</para>
-	<para>
-	To upload the package to Sourceforge, simply issue
-	</para>
-	<para>
-	<programlisting>
-  make tarball-upload
-</programlisting>
-	</para>
-	<para>
-	Go to the displayed URL and release the file publicly on Sourceforge.
-        For the change log field, use the relevant section of the
-        <filename>ChangeLog</filename> file.
-      </para>
-    </sect3>
-
-    <sect3 id="newrelease-rpm"><title>SuSE, Conectiva or Red Hat RPM</title>
-        <para>
-        In following text, replace <replaceable class="parameter">dist</replaceable>
-        with either <quote>rh</quote> for Red Hat or <quote>suse</quote> for SuSE.
-        </para>
-        <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). 
-	</para>
-	<para>
-        As the only exception to not changing anything after export from CVS,
-        now examine the file <filename>privoxy-</filename><replaceable class="parameter">dist</replaceable><filename>.spec</filename>
-        and make sure that the version information and the RPM release number are
-        correct. The RPM release numbers for each version start at one. Hence it must
-        be reset to one if this is the first RPM for
-        <replaceable class="parameter">dist</replaceable> which is built from version
-        X.Y.Z. Check the
-        <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118";>file
-        list</ulink> if unsure. Else, it must be set to the highest already available RPM
-        release number for that version plus one.
-	</para>
-	<para>
-        Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then do
-	</para>
-	<para>
-	<programlisting>
-  make <replaceable class="parameter">dist</replaceable>-dist
-</programlisting>
-	</para>
-	<para>
-	To upload the package to Sourceforge, simply issue
-	</para>
-	<para>
-	<programlisting>
-  make <replaceable class="parameter">dist</replaceable>-upload <replaceable class="parameter">rpm_packagerev</replaceable>
-</programlisting>
-	</para>
-	<para>
-        where <replaceable class="parameter">rpm_packagerev</replaceable> is the
-        RPM release number as determined above.
-	Go to the displayed URL and release the file publicly on Sourceforge.
-        Use the release notes and change log from the source tarball package.
-      </para>
-    </sect3>
-
-    <sect3 id="newrelease-os2"><title>OS/2</title>
-      <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then get the OS/2 Setup module:
-	</para>
-	<para>
-	<programlisting>
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co os2setup
-</programlisting>
-	</para>
-	<para>
-	You will need a mix of development tools.
-	The main compilation takes place with IBM Visual Age C++.
-	Some ancillary work takes place with GNU tools, available from
-	various sources like hobbes.nmsu.edu.
-	Specificially, you will need <filename>autoheader</filename>,
-	<filename>autoconf</filename> and <filename>sh</filename> tools.
-	The packaging takes place with WarpIN, available from various sources, including
-	its home page: <ulink url="http://www.xworkplace.org/";>xworkplace</ulink>.
-	</para>
-	<para>
-	Change directory to the <filename>os2setup</filename> directory.
-	Edit the os2build.cmd file to set the final executable filename.
-	For example, 
-	</para>
-	<para>
- 	<programlisting>
-  installExeName='privoxyos2_setup_X.Y.Z.exe'
-</programlisting>
-	</para>
-	<para>
- 	Next, edit the <filename>IJB.wis</filename> file so the release number matches
- 	in the <filename>PACKAGEID</filename> section:
- 	</para>
-	<para>
-	<programlisting>
-  PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z"
-</programlisting>
-	</para>
-	<para>
-	You're now ready to build.  Run:
-	</para>
-	<para>
-	<programlisting>
-  os2build
-</programlisting>
-	</para>
-	<para>
-         You will find the  WarpIN-installable executable in the
-        <filename>./files</filename> directory. Upload this anonymously to
-         <filename>uploads.sourceforge.net/incoming</filename>, create a release
-         for it, and you're done. Use the release notes and Change Log from the
-         source tarball package.
-	</para>
-    </sect3>
-
-    <sect3 id="newrelease-solaris"><title>Solaris</title>
-      <para>
-	Login to Sourceforge's compilefarm via ssh:
-	</para>
-	<para>
-	<programlisting>
-  ssh cf.sourceforge.net
-</programlisting>
-	</para>
-	<para>
-	Choose the right operating system (not the Debian one).
-        When logged in, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then run
-	</para>
-	<para>
-	<programlisting>
-  gmake solaris-dist
-</programlisting>
-	</para>
-	<para>
-	which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
-	solaris-upload</command> on the Sourceforge machine (no ncftpput). You now have
-	to manually upload the archive to Sourceforge's ftp server and release
-	the file publicly. Use the release notes and Change Log from the
-        source tarball package.
-	</para>
-    </sect3>
-
-    <sect3 id="newrelease-windows"><title>Windows</title>
-      <para>
-        You should ensure you have the latest version of Cygwin (from
-        <ulink url="http://www.cygwin.com/";>http://www.cygwin.com/</ulink>).
-        Run the following commands from within a Cygwin bash shell.
-      </para>
-      <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then get the Windows setup module:
-      </para>
-      <para>
-      <programlisting>
-  cvs -z3  -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co winsetup
-</programlisting>
-      </para>
-      <para>
-        Then you can build the package.  This is fully automated, and is
-        controlled by <filename>winsetup/GNUmakefile</filename>.
-        All you need to do is:
-      </para>
-      <para>
-      <programlisting>
-  cd winsetup
-  make
-</programlisting>
-      </para>
-      <para>
-        Now you can manually rename <filename>privoxy_setup.exe</filename> to
-        <filename>privoxy_setup_X_Y_Z.exe</filename>, and upload it to
-        SourceForge. When releasing the package on SourceForge, use the release notes
-        and Change Log from the source tarball package.
-      </para>
-    </sect3>
-
-    <sect3 id="newrelease-debian"><title>Debian</title>
-      <para>
-        First, <emphasis>make sure that you have freshly exported the
-        right version into an empty directory</emphasis>. (See
-        "Building and releasing packages" above).  Then add a log
-        entry to <filename>debian/changelog</filename>, if it is not
-        already there, for example by running:
-      </para>
-      <para>
-        <programlisting>
-  debchange -v &p-version;-&p-status;-1 "New upstream version"
-</programlisting>
-      </para>
-      <para>
-        Then, run: 
-      </para>
-      <para>
-        <programlisting>
-  dpkg-buildpackage -rfakeroot -us -uc -b
-</programlisting>
-      </para>
-      <para>
-        This will create
-        <filename>../privoxy_&p-version;-&p-status;-1_i386.deb</filename>
-        which can be uploaded.  To upload the package to Sourceforge, simply
-	issue
-      </para>
-      <para>
-        <programlisting>
-  make debian-upload
-</programlisting>
-      </para>
-    </sect3>
-
-    <sect3 id="newrelease-macosx"><title>Mac OS X</title>
-      <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then get the Mac OS X setup module:
-	</para>
-	<para>
-	<programlisting>
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co osxsetup
-</programlisting>
-	</para>
-	<para>
-	Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd osxsetup
-  build
-</programlisting>
-	</para>
-	<para>
-	This will run <filename>autoheader</filename>, <filename>autoconf</filename> and
-	<filename>configure</filename> as well as <filename>make</filename>.
-	Finally, it will copy over the necessary files to the ./osxsetup/files directory
-	for further processing by <filename>PackageMaker</filename>.
-	</para>
-	<para>
-	Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package
-	name to match the release, and hit the "Create package" button.
-	If you specify ./Privoxy.pkg as the output package name, you can then create
-	the distributable zip file with the command:
-	</para>
-	<para>
-	<programlisting>
-  zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg
-</programlisting>
-	</para>
-	<para>
-	You can then upload <filename>privoxyosx_setup_x.y.z.zip</filename> anonymously to 
-	<filename>uploads.sourceforge.net/incoming</filename>,
-	create a release for it, and you're done. Use the release notes
-        and Change Log from the source tarball package.
-	</para>
-    </sect3>
-
-    <sect3 id="newrelease-freebsd"><title>FreeBSD</title>
-      <para>
-	Login to Sourceforge's compile-farm via ssh:
-	</para>
-	<para>
-	<programlisting>
-  ssh cf.sourceforge.net
-</programlisting>
-	</para>
-	<para>
-	Choose the right operating system.
-        When logged in, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then run:
-	</para>
-	<para>
-	<programlisting>
-  gmake freebsd-dist
-</programlisting>
-	</para>
-	<para>
-	which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
-	freebsd-upload</command> on the Sourceforge machine (no ncftpput). You now have
-	to manually upload the archive to Sourceforge's ftp server and release
-	the file publicly. Use the release notes and Change Log from the
-        source tarball package.
-	</para>
-    </sect3>
-
-    <sect3 id="newrelease-hpux"><title>HP-UX 11</title>
-      <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then do FIXME.
-	</para>
-    </sect3>
-
-    <sect3 id="newrelease-amiga"><title>Amiga OS</title>
-      <para>
-	First, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then do FIXME.
-	</para>
-    </sect3>
-
-    <sect3 id="newrelease-aix"><title>AIX</title>
-      <para>
-	Login to Sourceforge's compilefarm via ssh:
-	</para>
-	<para>
-	<programlisting>
-  ssh cf.sourceforge.net
-</programlisting>
-	</para>
-	<para>
-	Choose the right operating system.
-        When logged in, <emphasis>make sure that you have freshly exported the right
-        version into an empty directory</emphasis>. (See "Building and releasing
-        packages" above). Then run:
-	</para>
-	<para>
-	<programlisting>
-  cd current
-  autoheader && autoconf && ./configure
-</programlisting>
-	</para>
-	<para>
-	Then run:
-	</para>
-	<para>
-	<programlisting>
-  make aix-dist
-</programlisting>
-	</para>
-	<para>
-	which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
-	aix-upload</command> on the Sourceforge machine (no ncftpput). You now have
-	to manually upload the archive to Sourceforge's ftp server and release
-	the file publicly. Use the release notes and Change Log from the
-        source tarball package.
-	</para>
-    </sect3>
-   </sect2>
-
-   <sect2 id="releasing">
-   <title>Uploading and Releasing Your Package</title>
-    <para>
-      After the package is ready, it is time to upload it 
-      to SourceForge, and go through the release steps. The upload
-      is done via FTP:
-    </para>
-     <para>
-      <itemizedlist>
-       <listitem>
-        <para>
-          Upload to: <ulink url="ftp://upload.sourceforge.net/incoming";>ftp://upload.sourceforge.net/incoming</ulink>
-        </para>
-      </listitem> 
-      <listitem>
-       <para>
-         user: <literal>anonymous</literal>
-       </para>
-      </listitem> 
-      <listitem>
-       <para>
-         password: <literal>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</literal>
-       </para>
-      </listitem> 
-     </itemizedlist>
-    </para> 
-    <para>
-     Or use the <command>make</command> targets as described above.
-    </para>
-    <para>
-     Once this done go to <ulink
-      url="https://sourceforge.net/project/admin/editpackages.php?group_id=11118";
-      >https://sourceforge.net/project/admin/editpackages.php?group_id=11118</ulink>, 
-     making sure you are logged in. Find your target platform in the 
-     second column, and click <literal>Add Release</literal>. You will 
-     then need to create a new release for your package, using the format 
-     of <literal>$VERSION ($CODE_STATUS)</literal>, e.g. <emphasis>&p-version;
-     (beta)</emphasis>.
-    </para>
-    <para>
-     Now just follow the prompts. Be sure to add any appropriate Release
-     notes. You should see your freshly uploaded packages in 
-     <quote>Step 2. Add Files To This Release</quote>. Check the 
-     appropriate box(es). Remember at each step to hit the 
-     <quote>Refresh/Submit</quote> buttons! You should now see your 
-     file(s) listed in Step 3. Fill out the forms with the appropriate 
-     information for your platform, being sure to hit <quote>Update</quote>
-     for each file. If anyone is monitoring your platform, check the 
-     <quote>email</quote> box at the very bottom to notify them of 
-     the new package. This should do it!
-    </para>
-    <para>
-     If you have made errors, or need to make changes, you can go through 
-     essentially the same steps, but select <literal>Edit Release</literal>, 
-     instead of <literal>Add Release</literal>.
-    </para>
-   </sect2>
-
-    <sect2 id="afterrelease">
-    <title>After the Release</title>
-     <para>
-      When all (or: most of the) packages have been uploaded and made available,
-      send an email to the <ulink url="mailto:ijbswa-announce@xxxxxxxxxxxxxxxxxxxxx";>announce
-      mailing list</ulink>, Subject: "Version X.Y.Z available for download". Be sure to
-      include the
-      <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118";>download
-      location</ulink>, the release notes and the Changelog. Also, post an
-      updated News item on the project page Sourceforge, and update the Home 
-      page and docs linked from the Home page (see below). Other news sites
-      and release oriented sites, such as Freshmeat, should also be notified.
-     </para>
-   </sect2>
-
-  </sect1>
-  
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="webserver-update"><title>Update the Webserver</title>
-   <para>
-    The webserver should be updated at least with each stable release. When
-    updating, please follow these steps to make sure that no broken links,
-    inconsistent contents or permission problems will occur (as it has many 
-    times in the past!):
-   </para>
-   <para>
-    If you have changed anything in the stable-branch documentation source
-    SGML files, do:
-   </para>
-   <para>
-    <programlisting>
-  make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you)
-</programlisting>
-   </para>
-   <para>
-    That will generate <filename>doc/webserver/user-manual</filename>,
-    <filename>doc/webserver/developer-manual</filename>,
-    <filename>doc/webserver/faq</filename>, 
-    <filename>doc/pdf/*.pdf</filename> and
-    <filename>doc/webserver/index.html</filename> automatically.
-   </para>
-   <para>
-    If you changed the manual page sources, generate
-    <filename>doc/webserver/man-page/privoxy-man-page.html</filename>
-    by running <quote><command>make man</command></quote>. (This is
-    a separate target due to dependencies on some obscure perl scripts
-    [now in CVS, but not well tested]. See comments in <filename>GNUmakefile</filename>.)
-   </para>
-   <para>
-    If you want to add new files to the webserver, create them locally in
-    the <filename>doc/webserver/*</filename> directory (or
-    create new directories under <filename>doc/webserver</filename>).
-   </para>
-   <para>
-    Next, commit any changes from the above steps to CVS. All set? 
-    If these are docs in the stable branch, then do:
-   </para>
-   <para>
-    <programlisting>
-  make webserver
-</programlisting>
-   </para>
-   <para>
-    This will do the upload to <ulink url="http://www.privoxy.org/";>the
-    webserver</ulink> (www.privoxy.org) and ensure all files and directories
-    there are group writable.
-   </para>
-   <para>
-    Please do <emphasis>NOT</emphasis> use any other means of transferring
-    files to the webserver to avoid permission problems. Also, please do not
-    upload docs from development branches or versions. The publicly posted
-    docs should be in sync with the last official release.
-   </para>
-  </sect1>
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="contact"><title>Contacting the developers, Bug Reporting and Feature Requests</title>
-<!-- Include contacting.sgml  -->
- &contacting;
-<!-- end contacting -->
-  </sect1>
-  
-
-<!--   ~~~~~~~~       New section Header    ~~~~~~~~~     -->
-<sect1 id="copyright"><title>Privoxy Copyright, License and History</title>
-
-<!-- Include copyright.sgml -->
- &copyright;
-<!-- end -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2><title>License</title>
-<!-- Include copyright.sgml: -->
- &license;
-<!-- end copyright -->
-</sect2>
-<!--  ~  End section  ~  -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2><title>History</title>
-<!-- Include history.sgml -->
- &history;
-<!-- end -->
-</sect2>
-
-</sect1>
-  
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="seealso"><title>See also</title>
-<!-- Include seealso.sgml -->
- &seealso;
-<!-- end  -->
-
-  </sect1>
-
-  <!--
-
-  This program is free software; you can redistribute it 
-  and/or modify it under the terms of the GNU General
-  Public License as published by the Free Software
-  Foundation; either version 2 of the License, or (at
-  your option) any later version.
-
-  This program is distributed in the hope that it will
-  be useful, but WITHOUT ANY WARRANTY; without even the
-  implied warranty of MERCHANTABILITY or FITNESS FOR A
-  PARTICULAR PURPOSE.  See the GNU General Public
-  License for more details.
-
-  The GNU General Public License should be included with
-  this file.  If not, you can view it at
-  http://www.gnu.org/copyleft/gpl.html
-  or write to the Free Software Foundation, Inc., 59
-  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-
-  $Log: developer-manual.sgml,v $
-  Revision 2.27  2009/02/19 02:20:22  hal9
-  Make some links in seealso conditional. Man page is now privoxy only links.
-
-  Revision 2.26  2009/02/12 16:08:26  fabiankeil
-  Declare the code stable.
-
-  Revision 2.25  2009/02/12 15:37:05  fabiankeil
-  Update templates.
-
-  Revision 2.24  2009/01/13 16:50:35  fabiankeil
-  The standard.action file is gone.
-
-  Revision 2.23  2008/09/26 17:02:01  fabiankeil
-  - Break some more CVS substitutions in examples.
-  - Remove Junkbusters reference in example header
-    for new files.
-
-  Revision 2.22  2008/08/30 15:37:35  fabiankeil
-  Update entities.
-
-  Revision 2.21  2008/08/16 08:51:28  fabiankeil
-  Update version-related entities.
-
-  Revision 2.20  2008/06/14 13:21:24  fabiankeil
-  Prepare for the upcoming 3.0.9 beta release.
-
-  Revision 2.19  2008/05/12 11:13:33  fabiankeil
-  Clarify that Privoxy is licensed under GPL version 2.
-
-  Revision 2.18  2008/02/04 12:14:06  fabiankeil
-  Change "Edit Packages" URL to use https.
-
-  Revision 2.17  2008/02/03 21:37:41  hal9
-  Apply patch from Mark: s/OSX/OS X/
-
-  Revision 2.16  2008/01/19 17:52:38  hal9
-  Re-commit to fix various minor issues for new release.
-
-  Revision 2.15  2008/01/19 15:03:05  hal9
-  Doc sources tagged for 3.0.8 release.
-
-  Revision 2.14  2008/01/17 01:49:51  hal9
-  Change copyright notice for docs s/2007/2008/. All these will be rebuilt soon
-  enough.
-
-  Revision 2.13  2007/10/30 17:59:31  fabiankeil
-  - Bump p-version, p-status and copyright date.
-  - Mention that the manual is out of date.
-  - Don't use examples with HardToReadCamelCase after
-    explaining that we actually don't like that.
-  - Minor cosmetics.
-
-  Revision 2.12  2006/11/14 01:57:46  hal9
-  Dump all docs prior to 3.0.6 release. Various minor changes to faq and user
-  manual.
-
-  Revision 2.11  2006/09/26 02:36:29  hal9
-  Fix broken link per bug tracker.
-
-  Revision 2.10  2006/09/22 01:27:55  hal9
-  Final commit of probably various minor changes here and there. Unless
-  something changes this should be ready for pending release.
-
-  Revision 2.9  2006/09/14 02:30:07  hal9
-  Fix ijbswa cvs links. Update notes on release process, and which config files
-  should be overwritten and which not.
-
-  Revision 2.8  2006/08/22 23:35:01  hal9
-  Fix email address, cvs URI, address branching changes and various other
-  small updates.
-
-  Revision 2.7  2006/07/18 14:48:50  david__schmidt
-  Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-  with what was really the latest development (the v_3_0_branch branch)
-
-  Revision 1.46.2.11  2002/12/11 13:12:15  hal9
-  Rewrite cvs write access give-away section.
-
-  Revision 1.46.2.10  2002/09/26 21:53:45  hal9
-  Changes to reflect recent change in stable branch commit policy (hopefully
-  clearer now).
-
-  Revision 1.46.2.9  2002/09/26 01:21:40  hal9
-  Porting 3.1.1 changes: more on cvs and branches, more on versions and
-  releases.
-
-  Revision 1.46.2.8  2002/08/17 00:16:10  hal9
-  Add note on updating webserver for User-manual/CGI editor, which is version
-  dependent (and different from main UM link).
-
-  Revision 1.46.2.7  2002/08/14 17:29:25  hal9
-  Add small notes on post-release steps, and uploading docs to webserver.
-
-  Revision 1.46.2.6  2002/08/10 11:40:25  oes
-  Added disclaimer about probably being out-of-date and two small hints
-
-  Revision 1.46.2.5  2002/08/09 01:15:12  hal9
-  Added some notes on pre-release steps (test builds first, update ChangeLog).
-
-  Revision 1.46.2.4  2002/05/29 00:30:59  mal0rd
-  Fixed a little formatting.  Clarified debian section.
-
-  Revision 1.46.2.3  2002/05/28 04:32:45  hal9
-  Change hints on bundling index.html to privoxy-index.html
-
-  Revision 1.46.2.2  2002/05/26 17:04:24  hal9
-  -Spellcheck, very minor edits, and sync across branches
-
-  Revision 1.48  2002/05/26 12:48:31  roro
-  Add releasing information about Debian.
-
-  Revision 1.47  2002/05/26 04:55:11  mal0rd
-  Added debian-dist and debian-upload targets.  Also documented usage.
-
-  Revision 1.46  2002/05/22 17:15:00  oes
-  Updated intro
-
-  Revision 1.45  2002/05/19 23:01:54  hal9
-  Add small section on general packaging guidelines (e.g. actions files must
-  be writable).
-
-  Revision 1.44  2002/05/15 03:55:17  hal9
-  Fix ulink -> link, and minor modification to release process section for
-  clarification.
-
-  Revision 1.43  2002/05/10 01:48:19  hal9
-  This is mostly proposed copyright/licensing additions and changes. Docs
-  are still GPL, but licensing and copyright are more visible. Also, copyright
-  changed in doc header comments (eliminate references to JB except FAQ).
-
-  Revision 1.42  2002/05/05 20:26:02  hal9
-  Sorting out license vs copyright in these docs.
-
-  Revision 1.41  2002/05/04 08:44:44  swa
-  bumped version
-
-  Revision 1.40  2002/05/04 00:43:43  hal9
-  -Remove TOC/first page kludge with proper stylesheet fix.
-  -Combined the two very brief sections: Intro and Quickstart.
-
-  Revision 1.39  2002/05/02 15:08:25  oes
-  Added explanation about version numbers and RPM package revisions
-
-  Revision 1.38  2002/04/29 02:20:31  hal9
-  Add info on steps for uploading and the release process on SF.
-
-  Revision 1.37  2002/04/26 17:23:29  swa
-  bookmarks cleaned, changed structure of user manual, screen and programlisting cleanups, and numerous other changes that I forgot
-
-  Revision 1.36  2002/04/26 05:25:23  hal9
-  Mass commit to catch a few scattered fixes.
-
-  Revision 1.35  2002/04/17 15:16:15  oes
-  Added link to docbook crash course
-
-  Revision 1.34  2002/04/15 23:39:32  oes
-   - Extended & fixed the release section
-   - Added CVS guideline sections
-   - Separated webserver section from release section
-   - Commented out boilerplate inclusion (If you don't know yet what it is,
-     you shouldn't mess with its code ;-)
-   - Nits & fixes
-
-  Revision 1.33  2002/04/12 03:49:53  hal9
-  Spell checked. Clarification on where docs are kept.
-
-  Revision 1.32  2002/04/11 21:29:58  jongfoster
-  Documenting Win32 release procedure
-
-  Revision 1.31  2002/04/11 09:32:52  oes
-  more nits
-
-  Revision 1.30  2002/04/11 09:24:53  oes
-  nits
-
-  Revision 1.29  2002/04/10 18:45:14  swa
-  generated
-
-  Revision 1.28  2002/04/08 22:59:26  hal9
-  Version update. Spell chkconfig correctly :)
-
-  Revision 1.27  2002/04/08 15:31:18  hal9
-  Touch ups to documentation section.
-
-  Revision 1.26  2002/04/07 23:50:08  hal9
-  Documentation changes to reflect HTML docs now in CVS, and new generated files
-  list.
-
-  Revision 1.25  2002/04/06 05:07:28  hal9
-  -Add privoxy-man-page.sgml, for man page.
-  -Add authors.sgml for AUTHORS (and p-authors.sgml)
-  -Reworked various aspects of various docs.
-  -Added additional comments to sub-docs.
-
-  Revision 1.24  2002/04/04 21:33:37  hal9
-  More on documenting the documents.
-
-  Revision 1.23  2002/04/04 18:46:47  swa
-  consistent look. reuse of copyright, history et. al.
-
-  Revision 1.22  2002/04/04 17:27:56  swa
-  more single file to be included at multiple points. make maintaining easier
-
-  Revision 1.21  2002/04/04 06:48:37  hal9
-  Structural changes to allow for conditional inclusion/exclusion of content
-  based on entity toggles, e.g. 'entity % p-not-stable  "INCLUDE"'. And
-  definition of internal entities, e.g. 'entity p-version "2.9.13"' that will
-  eventually be set by Makefile.
-  More boilerplate text for use across multiple docs.
-
-  Revision 1.20  2002/04/04 03:28:27  david__schmidt
-  Add Mac OS X section
-
-  Revision 1.19  2002/04/03 15:09:42  david__schmidt
-  Add OS/2 build section
-
-  Revision 1.18  2002/04/03 03:51:48  hal9
-  Touch ups.
-
-  Revision 1.17  2002/04/03 01:21:17  hal9
-  Implementing Andreas's suggestions for Release sections.
-
-  Revision 1.16  2002/03/31 23:04:40  hal9
-  Fleshed out the doc section, and added something for an intro so it was not
-  blank.
-
-  Revision 1.15  2002/03/30 22:29:47  swa
-  wrong make flavour
-
-  Revision 1.14  2002/03/30 19:04:08  swa
-  people release differently. no good.
-  I want to make parts of the docs only.
-
-  Revision 1.13  2002/03/27 01:16:41  hal9
-  ditto
-
-  Revision 1.12  2002/03/27 01:02:51  hal9
-  Touch up on name change...
-
-  Revision 1.11  2002/03/26 22:29:55  swa
-  we have a new homepage!
-
-  Revision 1.10  2002/03/24 12:33:01  swa
-  more additions.
-
-  Revision 1.9  2002/03/24 11:01:05  swa
-  name change
-
-  Revision 1.8  2002/03/23 15:13:11  swa
-  renamed every reference to the old name with foobar.
-  fixed "application foobar application" tag, fixed
-  "the foobar" with "foobar". left junkbustser in cvs
-  comments and remarks to history untouched.
-
-  Revision 1.7  2002/03/11 13:13:27  swa
-  correct feedback channels
-
-  Revision 1.6  2002/02/24 14:25:06  jongfoster
-  Formatting changes.  Now changing the doctype to DocBook XML 4.1
-  will work - no other changes are needed.
-
-  Revision 1.5  2001/10/31 18:16:51  swa
-  documentation added: howto generate docs in text and html
-  format, howto move stuff to the webserver.
-
-  Revision 1.4  2001/09/23 10:13:48  swa
-  upload process established. run make webserver and
-  the documentation is moved to the webserver. documents
-  are now linked correctly.
-
-  Revision 1.3  2001/09/13 15:27:40  swa
-  cosmetics
-
-  Revision 1.2  2001/09/13 15:20:17  swa
-  merged standards into developer manual
-
-  Revision 1.1  2001/09/12 15:36:41  swa
-  source files for junkbuster documentation
-
-  Revision 1.3  2001/09/10 17:43:59  swa
-  first proposal of a structure.
-
-  Revision 1.2  2001/06/13 14:28:31  swa
-  docs should have an author.
-
-  Revision 1.1  2001/06/13 14:20:37  swa
-  first import of project's documentation for the webserver.
-
-  -->
-
-</article>
diff --git a/external/privoxy/doc/source/faq.sgml b/external/privoxy/doc/source/faq.sgml
deleted file mode 100644
index 7684e8e..0000000
--- a/external/privoxy/doc/source/faq.sgml
+++ /dev/null
@@ -1,3454 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN"[
-<!entity % dummy "IGNORE"> 
-<!entity supported SYSTEM "supported.sgml">
-<!entity newfeatures SYSTEM "newfeatures.sgml">
-<!entity p-intro SYSTEM "privoxy.sgml">
-<!entity seealso SYSTEM "seealso.sgml">
-<!entity contacting SYSTEM "contacting.sgml">
-<!entity history SYSTEM "history.sgml">
-<!entity copyright SYSTEM "copyright.sgml">
-<!entity license SYSTEM "license.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity % p-text "IGNORE">        <!-- define we are not a text only doc -->
-<!entity % p-doc "INCLUDE">        <!-- and we are a formal doc           -->
-<!entity % p-supp-userman "INCLUDE"> <!-- Include all from supported.sgml -->
-<!entity  my-copy "&copy;">          <!-- kludge for docbook2man          -->
-<!entity % p-newstuff "INCLUDE">      <!-- exclude stuff from devel versions -->
-<!entity % seealso-extra "INCLUDE"> <!-- extra stuff from seealso.sgml    -->
-<!entity  my-app "<application>Privoxy</application>">
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/faq.sgml,v $
-
- Purpose     :  FAQ
-                This file belongs into
-                ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-                
- $Id: faq.sgml,v 2.58 2009/03/21 12:27:44 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- Based partially on the Internet Junkbuster FAQ originally written by and
- Copyright (C) 1997 Anonymous Coders and Junkbusters Corporation.
- http://www.junkbusters.com/
-
- <Qandaset defaultlabel='qanda'>
-  <QandAEntry>
-   <question>
-    <para> 
-     How are you?
-    </para>
-   </question>
-   <answer>
-    <para> 
-     Fine.
-    </para>
-   </answer>
-  </QandAEntry>
- </QandASet>
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- this file!
-
- Please we keep the info in this file as version independent as possible 
- so we only have to maintain one FAQ. Where significant changes are 
- made to Privoxy configuration, please note the change in such a way that 
- it makes sense to both users of older and newer versions.
- ========================================================================
-
-
--->
-
-
-<article id="index" class="faq">
-<artheader>
-<title>Privoxy Frequently Asked Questions</title>
-
-<pubdate>
- <subscript>
-<!-- Completely the wrong markup, but very little is allowed  -->
-<!-- in this part of an article. FIXME -->
- <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by 
- <ulink url="http://www.privoxy.org/";>Privoxy Developers</ulink>
- </subscript>
-</pubdate>
-
-<pubdate>$Id: faq.sgml,v 2.58 2009/03/21 12:27:44 fabiankeil Exp $</pubdate>
-
-<!--
-
-Note: this should generate a separate page, and a live link to it. 
-But it doesn't for some mysterious reason. Please leave commented
-unless it can be fixed proper. For the time being, the copyright 
-statement will be in copyright.smgl.
-
-Hal.
-
-<legalnotice id="legalnotice"> 
- <para>
-  text goes here ........
- </para>
-</legalnotice>
-
--->
-
-<!--
-<authorgroup>
- <author>
-  <affiliation>
-   <orgname>By: Privoxy Developers</orgname>
-   </affiliation>
- </author>
-</authorgroup>
--->
-<abstract>
-<![%dummy;[
-<para>
- <comment>
-  This is here to keep vim syntax file from breaking :/
-  If I knew enough to fix it, I would.
-  PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
- </comment>
-</para>
-]]>
- <para>
- This FAQ gives quick answers to frequently asked questions about
- <ulink url="http://www.privoxy.org/";>Privoxy</ulink>.
- It is not a substitute for the 
- <ulink url="../user-manual/index.html"><citetitle>Privoxy User Manual</citetitle></ulink>.
-<!-- 
- This works, at least in some situtations:
- Test: <ulink url="privoxy-user-manual.pdf"><citetitle>User Manual</citetitle></ulink>.
---> 
- </para>
-
-<!-- Include privoxy.sgml boilerplate: -->
- <para>What is Privoxy?</para> &p-intro;
-<!-- end boilerplate -->
-
- <para>
-  Please note that this document is a work in progress. This copy represents
-  the state at the release of version &p-version;.
-  You can find the latest version of the document at <ulink
-  url="http://www.privoxy.org/faq/";>http://www.privoxy.org/faq/</ulink>.
-  Please see the <link linkend="contact">Contact section</link> if you want to
-  contact the developers. 
- </para>
-
-<!--   <para> -->
-<!--    Feel free to send a note to the developers at <email>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</email>. -->
-<!--   </para> -->
-</abstract>
-</artheader>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1 id="general"><title>General Information</title>
-<sect2 renderas="sect3" id="who-uses"><title>Who should give &my-app; a try?</title>
- <para>
-  Anyone who is interested in security, privacy, or in 
-  finer-grained control over their web and Internet experience.
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="bestchoice"><title>Is Privoxy the best choice for
-me?</title>
- <para>
-  &my-app; is certainly a good choice, especially for those who want more 
-  control and security. Those with the willingness to read the documentation
-  and the ability to fine-tune their installation will benefit the most.
- </para>
- <para>
-  One of <application>Privoxy's</application>
-  strengths is that it is highly configurable giving you the ability to
-  completely personalize your installation. Being familiar with, or at least
-  having an interest in learning about <ulink
-  url="http://en.wikipedia.org/wiki/Http";>HTTP</ulink> and other networking
-  protocols, <ulink url="http://en.wikipedia.org/wiki/Html";>HTML</ulink>, and 
-  <ulink url="http://en.wikipedia.org/wiki/Regular_expressions";><quote>Regular
-  Expressions</quote></ulink>
-  will be a big plus and will help you get the most out of &my-app;. 
-  A new installation just includes a very basic configuration. The user 
-  should take this as a starting point only, and enhance it as he or she 
-  sees fit. In fact, the user is encouraged, and expected to, fine-tune the 
-  configuration.
- </para>
- <para>
-  Much of <application>Privoxy's</application> configuration can be done 
-  with a <ulink url="http://en.wikipedia.org/wiki/Web_browser";>Web browser</ulink>.
-  But there are areas where configuration is done using a 
-  <ulink url="http://en.wikipedia.org/wiki/Text_editors";>text editor</ulink>
-  to edit configuration files. Also note that the web-based action editor
-  doesn't use authentication and should only be enabled in environments
-  where all clients with access to &my-app; listening port can be trusted.
-  </para>
-</sect2>
-
-<sect2 renderas="sect3" id="proxymoron"><title>What is a <quote>proxy</quote>? How does
-Privoxy work? </title>
- <para>
-  A <ulink url="http://en.wikipedia.org/wiki/Proxy_server";>web proxy</ulink>
-  is a service, based on a software such as &my-app;, that clients
-  (i.e. browsers) can use instead of connecting to web servers directly.
-  The clients then ask the proxy to request objects (web pages, images, movies etc)
-  on their behalf and to forward the data to the clients.
-  It is a <quote>go-between</quote>. For details, see
-  <ulink url="http://en.wikipedia.org/wiki/Proxy_server";>Wikipedia's proxy definition</ulink>.
- </para>
- <para>
-  There are many reasons to use web proxies, such as security (firewalling),
-  efficiency (caching) and others, and there are any number of proxies
-  to accommodate those needs.
- </para>
- <para>
-  &my-app; is a proxy that is primarily focused on
-  privacy enhancement, ad and junk elimination and freeing the user from
-  restrictions placed on his activities. Sitting between your browser(s) and the Internet,
-  it is in a perfect position to filter outbound personal information that your
-  browser is leaking, as well as inbound junk. It uses a variety of techniques to do
-  this, all of which are under your complete control via the various configuration
-  files and options. Being a proxy also makes it easier to share
-  configurations among multiple browsers and/or users.
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="otherstuff">
-<title>Does Privoxy do anything more than ad blocking?</title>
- <para> 
-  Yes, ad blocking is but one possible use. There are many, many ways &my-app; 
-  can be used to sanitize and customize web browsing. 
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="newjb"><title>What is this new version of 
-<quote><citetitle>Junkbuster</citetitle></quote>?</title>
-
-<!-- Include history.sgml -->
- &history;
-<!-- end -->
-
-</sect2>
-
-
-<sect2 renderas="sect3">
-<title id="whyprivoxy">Why <quote>Privoxy</quote>? Why change the name from
-Junkbuster at all?</title>
-<para>
- Though outdated, <ulink url="http://junkbusters.com/";>Junkbusters Corporation</ulink>
- continues to offer their original version of the <application>Internet
- Junkbuster</application>, so publishing our
- <application> Junkbuster</application>-derived software under the same name
- led to confusion.
-</para>
-<para>
- There are also potential legal complications from our use of the 
- <application>Junkbuster</application> name, which is a registered trademark of 
- <ulink url="http://junkbusters.com/";>Junkbusters Corporation</ulink>.
- There are, however, no objections from Junkbusters Corporation to the 
- <application>Privoxy</application> project itself, and they, in fact, still
- share our ideals and goals.
-</para>
-<para>
- The developers also believed that there are so many improvements over the original 
- code, that it was time to make a clean break from the past and make 
- a name in their own right.
-</para>
-<para>
- <application>Privoxy</application> is the 
- <quote><emphasis>Privacy Enhancing Proxy</emphasis></quote>. Also, its content
- modification and junk suppression gives <emphasis>you</emphasis>, the user, more
- control, more freedom, and allows you to browse your personal and
- <quote><emphasis>private</emphasis> edition</quote> of the web.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="differs"><title>How does Privoxy differ
-from the old Junkbuster?</title> 
-<para>
- <application>Privoxy</application> picks up where
- <application>Junkbuster</application> left off.
- The new <application>Privoxy</application> still blocks ads and banners,
- still manages <ulink
- url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink>, and still
- helps protect your privacy. But, most of these features have been enhanced,
- and many new ones have been added, all in the same vein.
- </para>
-<para>
- <application>Privoxy</application>'s new features include:
-</para>
-
-<!-- Include newfeatures.sgml: --> 
- &newfeatures;
-<!-- end include -->
-
-</sect2>
-
-<sect2 renderas="sect3" id="whatsanad">
-<title id="knows">How does Privoxy know what is
-an ad, and what is not?</title>
-<para>
- <application>Privoxy</application>'s approach to blocking ads is twofold:
-</para>
-<para>
- First, there are certain patterns in the <emphasis>locations</emphasis> (URLs)
- of banner images. This applies to both the path (you wouldn't guess how many
- web sites serve their banners from a directory called <quote>banners</quote>!)
- and the host (blocking the big banner hosting services like doublecklick.net
- already helps a lot). <application>Privoxy</application> takes advantage of this
- fact by using <ulink url="../user-manual/actions-file.html#AF-PATTERNS">URL
- patterns</ulink> to sort out and block the requests for things that sound 
- like they would be ads or banners.
-</para>
-<para>
- Second, banners tend to come in certain <emphasis>sizes</emphasis>. But you
- can't tell the size of an image by its URL without downloading it, and if you
- do, it's too late to save bandwidth. Therefore, <application>Privoxy</application>
- also inspects the HTML sources of web pages while they are loaded, and replaces
- references to images with standard banner sizes by dummy references, so that
- your browser doesn't request them anymore in the first place.
-</para>
-<para>
- Both of this involves a certain amount of guesswork and is, of course, freely
- and readily configurable.
-</para>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="mistakes">Can Privoxy make mistakes? 
-This does not sound very scientific.</title>
-<para>
- Actually, it's a black art ;-) And yes, it is always possible to have a broad
- rule accidentally block or change something by mistake. You will almost surely
- run into such situations at some point. It is tricky writing rules to
- cover every conceivable possibility, and not occasionally get false positives.
-</para>
-
-<para>
- But this should not be a big concern since the
- <application>Privoxy</application> configuration is very flexible, and
- includes tools to help identify these types of situations so they can be
- addressed as needed, allowing you to customize your installation.
- (<link linkend="badsite">See the Troubleshooting section below</link>.)
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="configornot">Will I have to configure Privoxy
- before I can use it?</title>
-<para>
- That depends on your expectations.
- The default installation should give you a good starting
- point, and block <emphasis>most</emphasis> ads and unwanted content,
- but many of the more advanced features are off by default, and require
- you to activate them. 
-</para>
-<para>
- You do have to set up your browser to use
- <application>Privoxy</application> (see the <link
- linkend="firststep">Installation section below</link>). 
-</para>
-<para>
- And you will certainly run into situations where there are false positives,
- or ads not being blocked that you may not want to see. In these cases, you
- would certainly benefit by customizing <application>Privoxy's</application>
- configuration to more closely match your individual situation. And we
- encourage you to do this. This is where the real power of
- <application>Privoxy</application> lies!
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="lan">
-<title>Can Privoxy run as a server on a network?</title>
- <para> 
-  Yes, &my-app; runs as a server already, and can easily be configured to
-  <quote>serve</quote> more than one client. See <link linkend="lanconfig">
-  How can I set up Privoxy to act as a proxy for my LAN</link> below.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="browsers2"><title>My browser does the same things as
-Privoxy. Why should I use Privoxy at all?</title>
- <para>
-  Modern browsers do indeed have <emphasis>some</emphasis> of the same
-  functionality as <application>Privoxy</application>. Maybe this is
-  adequate for you. But <application>Privoxy</application> is very
-  versatile and powerful, and can probably do a number of things
-  your browser just can't.
- </para>
- <para>
-  In addition, a proxy is good choice if you use multiple browsers, or 
-  have a LAN with multiple computers since &my-app; can run as a server  
-  application. This way all the configuration is in one place, and you don't
-  have to maintain a similar configuration for possibly many browsers or
-  users.
- </para>
- <para>
-  Note, however, that it's recommended to leverage both your browser's
-  and <application>Privoxy's</application> privacy enhancing features
-  at the same time. While your browser probably lacks some features
-  &my-app; offers, it should also be able to do some things more
-  reliable, for example restricting and suppressing JavaScript.
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="whytrust"><title>Why should I trust Privoxy?</title>
- <para>
-  The most important reason is because you have access to
-  <emphasis>everything</emphasis>, and you can control everything. You can
-  check every line of every configuration file yourself. You can check every
-  last bit of source code should you desire. And even if you can't read code, 
-  there should be some comfort in knowing that <!-- thousands of -->other people can, 
-  and do read it. You can build the software from scratch, if you want,
-  so that you know the executable is clean, and that it is
-  <emphasis>yours</emphasis>. In fact, we encourage this level of scrutiny. It
-  is one reason we use &my-app; ourselves.
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="license"><title>Is there is a license or fee? What about a 
-warranty? Registration?</title>
- <para>
-  <application>Privoxy</application> is free software and licensed under the <ulink
-  url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";>GNU General Public License (GPL) version 2</ulink>.
-  It is free to use, copy, modify or distribute as you wish under the terms of this
-  license.  Please see the <link linkend="copyright">Copyright</link> section for more
-  information on the license and copyright. Or the <filename>LICENSE</filename> file 
-  that should be included.
- </para>
- <para>
-  There is <emphasis>no warranty</emphasis> of any kind, expressed, implied or otherwise.
-  That is something that would cost real money ;-) There is no registration either.
- </para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="spyware">
-<title>Can Privoxy remove spyware? Adware? Viruses?</title>
-<para>
- No, at least not reliably enough to trust it. &my-app; is not designed to be
- a malware removal tool and the default configuration doesn't even try to
- filter out any malware.
-</para>
-<para>
- &my-app; could help prevent contact from (known) sites that use such
- tactics with appropriate configuration rules, and thus could conceivably
- prevent contamination from such sites. However, keeping such a configuration
- up to date would require a lot of time and effort that would be better spend
- on keeping your software itself up to date so it doesn't have known
- vulnerabilities.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="otherads">
-<title>Can I use Privoxy with other ad-blocking software?</title>
-<para>
- &my-app; should work fine with other proxies and other software in general.
-</para>
-<para>
- But it is probably not necessary to use &my-app; in conjunction with other
- ad-blocking products, and this could conceivably cause undesirable results.
- It might be better to choose one software or the other and work a little to
- tweak its configuration to your liking.
-</para>
-<para>
- Note that this is an advice specific to ad blocking.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="jointeam"><title>I would like to help you, what can I do?</title>
-
-<sect3 renderas="sect4" id="jointeam-work"><title>Would you like to participate?</title>
-<para>
-   Well, we <emphasis>always</emphasis> need help. There is something for
-   everybody who wants to help us. We welcome new developers, packagers,
-   testers, documentation writers or really anyone with a desire to help in
-   any way. You <emphasis>DO NOT</emphasis> need to be a
-   <quote>programmer</quote>. There are many other tasks available. In fact,
-   the programmers often can't spend as much time programming because of some
-   of the other, more mundane things that need to be done, like checking the
-   Tracker feedback sections. 
- </para>
- <para>
-  So first thing, <ulink
-   url="https://sourceforge.net/account/register.php";>get an account on SourceForge.net</ulink>
-   and mail your id to the <ulink url="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";>developers
-   mailing list</ulink>. Then, please read the <ulink
-   url="../developer-manual/index.html">Developer's Manual</ulink>, at least
-   the pertinent sections.
-</para>
- <para>
-  You can also start helping out without SourceForge.net account,
-  simply by showing up on the mailing list, helping out other users,
-  providing general feedback or reporting problems you noticed.
- </para>
-</sect3>
-
-<sect3 renderas="sect4" id="donate"><title>Would you like to donate?</title>
-<para>
- <application>Privoxy</application> is developed by unpaid volunteers
- and thus our current running costs are pretty low. Nevertheless, we
- have plans that will cost money in the future. We would like to get
- this money through donations made by our users.
-</para>
-
-<para>
- <application>Privoxy</application> has therefore become an associated
- project of <ulink url="http://www.spi-inc.org/about-spi/about-spi";>Software
- in the Public Interest (SPI)</ulink>, which allows us to receive tax-deductible
- donations in most western countries.
-</para>
-
-<para>
- We intend to use the donations to pay for our domain after transfering
- it to SPI. Our goal is to make sure there's no single point of failure
- and the bill gets paid and the site keeps running even if a some of
- the currently active developers were to suddenly disappear for a while.
-</para>
-
-<para>
- We would also like to spend some money on more reliable hosting,
- on hardware to help make sure <application>Privoxy</application>
- keeps running on platforms the developers currently can't test on,
- and on technical books to educate our developers about said platforms
- or to improve their knowledge in general.
-</para>
-
-<para>
- If you enjoy our software and feel like helping out with a donation,
- please have a look at
- <ulink url="http://www.spi-inc.org/donations";>SPI's donation page</ulink>
- to see what the options are.
-<para>
-</sect3>
-
-</sect2>
-
-</sect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1  id="installation"><title>Installation</title>
-
-<sect2 renderas="sect3" id="whichbrowsers">
-<title>Which browsers are supported by Privoxy?</title>
-<para>
- Any browser that can be configured to use a proxy, which 
- should be virtually all browsers, including
- <application>Firefox</application>, <application>Internet
- Explorer</application>, <application>Opera</application>, and 
- <application>Safari</application> among others.
- Direct browser support is not an absolute requirement since
- <application>Privoxy</application> runs as a separate application and talks
- to the browser in the standardized HTTP protocol, just like a web server
- does.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="whichos">
-<title>Which operating systems are supported?</title>
-<!--
-Include supported.sgml here:
--->
-&supported;
-</sect2>
-
-<sect2 renderas="sect3" id="email-client">
-<title>Can I use Privoxy with my email client?</title>
-<para>
- As long as there is some way to set a HTTP proxy for the client, then yes,
- any application can be used, whether it is strictly speaking a
- <quote>browser</quote> or not. Though this may not be the best approach for
- dealing with some of the common abuses of HTML in email. See <link
- linkend="outlook">How can I configure <application>Privoxy</application>
- with <application>Outlook</application>?</link> below for more on
- this. 
-</para>
-<para>
- Be aware that HTML email presents a number of unique security and privacy
- related issues, that can require advanced skills to overcome. The developers
- recommend using email clients that can be configured to convert HTML to plain
- text for these reasons.
-</para>
-</sect2>
-
-<!-- Nobody is going to still be doing this!
-<sect2 renderas="sect3" id="newinstall"><title>Can I install  
- Privoxy over Junkbuster?</title>
- <para>
-   We recommend you un-install <application>Junkbuster</application>
-   first to minimize conflicts and confusion. You may want to 
-   save your old configuration files for future reference. The configuration
-   files and syntax have substantially changed, so you will need to manually
-   port your old patterns. See the <ulink url="../user-manual/upgradersnote.html">note
-   to upgraders</ulink> and <ulink url="../user-manual/installation.html">installation
-   chapter</ulink> in the <ulink url="../user-manual/index.html">User Manual</ulink>
-   for details.
- </para>
- <para>
-  Note: Some installers may automatically un-install
-  <application>Junkbuster</application>, if present!
- </para>
-
-</sect2>
--->
-
-<sect2 renderas="sect3" id="firststep">
-<title>I just installed Privoxy. Is there anything 
-special I have to do now?</title>
-
-<para>
- All browsers should be told to use <application>Privoxy</application> 
- as a proxy by specifying the correct proxy address and port number 
- in the appropriate configuration area for the browser. It's possible
- to combine &my-app; with a packet filter to intercept HTTP requests
- even if the client isn't explicitly configured to use &my-app;,
- but where possible, configuring the client is recommended. See 
- <ulink url="../user-manual/startup.html">the User Manual for more
- details</ulink>. You should also flush your browser's memory and disk
- cache to get rid of any cached junk items, and remove any stored 
- <ulink url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink>.
-
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="localhost"><title>What is the proxy address of Privoxy?</title>
- <para>
-  If you set up the <application>Privoxy</application> to run on
-  the computer you browse from (rather than your ISP's server or some
-  networked computer on a LAN), the proxy will be on <literal>127.0.0.1</literal> 
-  (sometimes referred to as <quote>localhost</quote>,
-  which is the special name used by every computer on the Internet to refer
-  to itself) and the port will be 8118 (unless you used the <ulink
-  url="../user-manual/config.html#LISTEN-ADDRESS">listen-address</ulink>
-  config option to tell <application>Privoxy</application> to run on
-  a different port).
- </para>
- <para>
-  When configuring your browser's proxy settings you typically enter
-  the word <quote>localhost</quote> or the IP address <quote>127.0.0.1</quote>
-  in the boxes next to <quote>HTTP</quote> and <quote>Secure</quote> (HTTPS) and
-  then the number <quote>8118</quote> for <quote>port</quote>. 
-  This tells your browser to send all web requests to <application>Privoxy</application>
-  instead of directly to the Internet.
- </para>
- <para>
-  <application>Privoxy</application> can also be used to proxy for 
-  a Local Area Network. In this case, your would enter either the IP 
-  address of the LAN host where <application>Privoxy</application> 
-  is running, or the equivalent hostname, e.g. <literal>192.168.1.1</literal>.
-  Port assignment would be same as above. Note that
-  <application>Privoxy</application> doesn't listen on any LAN interfaces by
-  default.
- </para>
- <para>
-  <application>Privoxy</application> does not currently handle
-  any other protocols such as FTP, SMTP, IM, IRC, ICQ, etc.
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="nothing">
-<title>I just installed Privoxy, and nothing is happening.
-All the ads are there. What's wrong?</title>
-
-<para>
- Did you configure your browser to use <application>Privoxy</application> 
- as a proxy? It does not sound like it. See above. You might also try flushing
- the browser's caches to force a full re-reading of pages. You can verify 
- that <application>Privoxy</application> is running, and your browser 
- is correctly configured by entering the special URL: 
- <ulink url="http://p.p/";>http://p.p/</ulink>. 
- <!-- Use http://p.p/ instead of http://config.privoxy.org/ here because
-      of potential redirect caching problem (see next Q). -->
- This should take you to a page titled <quote>This is Privoxy..</quote> with
- access to <application>Privoxy's</application> internal configuration.
- If you see this, then you are good to go. If you receive a page saying 
- <quote>Privoxy is not running</quote>, then the browser is not set up to use
- your <application>Privoxy</application> installation.
- If you receive anything else (probably nothing at all), it could either
- be that the browser is not set up correctly, or that
- <application>Privoxy</application> is not running at all. Check the <ulink
- url="../user-manual/config.html#LOGFILE">log file</ulink>. For instructions
- on starting <application>Privoxy</application> and browser configuration,
- see the <ulink url="http://www.privoxy.org/user-manual/startup.html";>chapter
- on starting <application>Privoxy</application></ulink> in the
- <ulink url="http://www.privoxy.org/user-manual/";>User Manual</ulink>.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="notused">
-<title>I get a <quote>Privoxy is not being used</quote> dummy page although
-Privoxy is running and being used.</title>
-
-<para>
- First, make sure that Privoxy is <emphasis>really</emphasis> running and
- being used by visiting <ulink url="http://p.p/";>http://p.p/</ulink>. You
- should see the <application>Privoxy</application> main page. If not, see
- the <ulink url="http://www.privoxy.org/user-manual/startup.html";>chapter
- on starting <application>Privoxy</application></ulink> in the
- <ulink url="http://www.privoxy.org/user-manual/";>User Manual</ulink>.
-</para>
-
-<para>
- Now if <ulink url="http://p.p/";>http://p.p/</ulink> works for you, but
- other parts of <application>Privoxy</application>'s web interface show
- the dummy page, your browser has cached a redirection it encountered before
- <application>Privoxy</application> was being used. You need to clear your
- browser's cache. Note that shift-reloading the dummy page won't help, since
- that'll only refresh the dummy page, not the redirection that lead you there.
-</para>
-
-<para>
- The procedure for clearing the cache varies from browser to browser. For
- example, <application>Mozilla/Netscape</application> users would click 
- <guibutton>Edit</guibutton> --> <guibutton>Preferences</guibutton> -->
- <guibutton>Advanced</guibutton> --> <guibutton>Cache</guibutton> and
- then click both <quote><guibutton>Clear Memory Cache</guibutton></quote>
- and <quote><guibutton>Clear Disk Cache</guibutton></quote>.
- In some <application>Firefox</application> versions it's
- <guibutton>Tools</guibutton> --> <guibutton>Options</guibutton> -->
- <guibutton>Privacy</guibutton> --> <guibutton>Cache</guibutton> and
- then click <quote><guibutton>Clear Cache Now</guibutton></quote>.
- <!-- In my Firefox versions it's the Netscape way. fk 2007-11-19-->
-</para>
-</sect2>
-
-</sect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1 id="configuration"><title>Configuration</title>
-<sect2 renderas="sect3">
-<title id="actionsfile">What exactly is an <quote>actions</quote> file?</title>
-
-<para>
- &my-app; utilizes the concept of <quote>
- <ulink url="../user-manual/actions-file.html#ACTIONS">actions</ulink></quote> 
- that are used to manipulate and control web page data.
- <ulink url="../user-manual/actions-file.html">Actions files</ulink>
- are where these <ulink url="../user-manual/actions-file.html#ACTIONS">actions</ulink>
- that <application>Privoxy</application> could take while processing a certain
- request, are configured. Typically, you would define a set of default actions
- that apply globally to all URLs, then add exceptions to these defaults where needed.
- There is a wide array of actions available that give the user a high degree
- of control and flexibility on how to process each and every web page.
-</para>
- 
-<para>
- Actions can be defined on a <ulink
- url="../user-manual/actions-file.html#AF-PATTERNS">URL pattern</ulink> basis, i.e.
- for single URLs, whole web sites, groups or parts thereof etc. Actions can also be
- grouped together and then applied to requests matching one or more patterns.
- There are many possible actions that might apply to any given site. As an example,
- if you are blocking <ulink url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink>
- as one of your default actions, but need to accept cookies from a given site,
- you would need to define an exception for this site in one of your actions
- files, preferably in <filename>user.action</filename>.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="actionss">
-<title>The <quote>actions</quote> concept confuses me. Please list 
-some of these <quote>actions</quote>.</title>
-<para>
- For a comprehensive discussion of the actions concept, please refer
- to the <ulink url="../user-manual/actions-file.html">actions file
- chapter</ulink> in the <ulink url="../user-manual/index.html">User
- Manual</ulink>. It includes a <ulink
- url="../user-manual/actions-file.html#ACTIONS">list of all actions</ulink>
- and an <ulink url="../user-manual/actions-file.html#ACT-EXAMPLES">actions
- file tutorial</ulink> to get you started.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3">
-<title id="actconfig">How are actions files configured? What is the easiest
-way to do this?</title> 
-
-<para>
- Actions files are just text files in a special syntax and can be edited
- with a text editor. But probably the easiest way is to access
- <application>Privoxy</application>'s user interface with your web browser
- at <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>
- (Shortcut: <ulink url="http://p.p/";>http://p.p/</ulink>) and then select
- <quote><ulink url="http://config.privoxy.org/show-status";>View &
- change the current configuration</ulink></quote> from the menu. Note 
- that this feature must be explicitly enabled in the main config file 
- (see <ulink
- url="../user-manual/config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</ulink>).
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3">
-<title>There are several different <quote>actions</quote> files. What are
-the differences?</title>
-<para>
- Three actions files 
- are being included by the developers, to be used for 
- different purposes: These are 
- <filename>default.action</filename>, the <quote>main</quote> actions file
- which is actively maintained by the <application>Privoxy</application>
- developers and typically sets the default policies, <filename>user.action</filename>,
- where users are encouraged to make their private customizations.
- Please see <ulink url="../user-manual/actions-file.html">the actions chapter</ulink>
- in the <ulink url="../user-manual/index.html">User Manual</ulink> for a more
- detailed explanation.
-</para>
-
-<para>
- Earlier versions included three different versions of the 
- <filename>default.action</filename> file. The new scheme allows for 
- greater flexibility of local configuration, and for browser based 
- selection of pre-defined <quote>aggressiveness</quote> levels.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="getupdates"><title>Where can I get updated Actions Files?</title>
- <para>
-  Based on your feedback and the continuing development, updates of 
-  <filename>default.action</filename> will be
-  made available from time to time on the <ulink
-  url="http://sourceforge.net/project/showfiles.php?group_id=11118";>files section</ulink> of
-  our <ulink url="http://sf.net/projects/ijbswa/";>project page</ulink>.
- </para>
-
- <para>
-  If you wish to receive an email notification whenever we release updates of
-  <application>Privoxy</application> or the actions file, <ulink
-  url="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/";>subscribe
-  to our announce mailing list</ulink>, ijbswa-announce@xxxxxxxxxxxxxxxxxxxxxx
- </para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="newconfig"><title>Can I use my old config files?</title>
- <para>
-  The syntax and purpose of configuration files has remained roughly the
-  same throughout the 3.x series, but backwards compatibility is not guaranteed.
-  Also each release contains updated, <quote>improved</quote> versions and it is
-  therefore strongly recommended to install the newer configuration files
-  and merge back your modifications.
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="difficult">
-<title>Why is the configuration so complicated?</title>
- <para>
-  <quote>Complicated</quote> is in the eye of the beholder. Those that are 
-  familiar with some of the underlying concepts, such as regular expression
-  syntax, take to it like a fish takes to water. Also, software that tries
-  hard to be <quote>user friendly</quote>, often lacks sophistication and
-  flexibility. There is always that trade-off there between power vs.
-  easy-of-use. Furthermore, anyone is welcome to contribute ideas and
-  implementations to enhance &my-app;. 
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="yahoo"><title>How can I make my Yahoo/Hotmail/Gmail account work?</title>
- <para>
-  The default configuration shouldn't impact the usability of any of these services.
-  It may, however, make all <ulink 
- url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink> 
-  temporary, so that your browser will forget your
-  login credentials in between browser sessions. If you would like not to have to log
-  in manually each time you access those websites, simply turn off all cookie handling
-  for them in the <filename>user.action</filename> file. An example for yahoo might
-  look like:
- </para>
- <para>
-  <screen># Allow all cookies for Yahoo login:
-#
-{ -<ulink url="../user-manual/actions-file.html#CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</ulink> -<ulink url="../user-manual/actions-file.html#CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</ulink> -<ulink url="../user-manual/actions-file.html#SESSION-COOKIES-ONLY">session-cookies-only</ulink> }
-.login.yahoo.com</screen>
- </para>
- <para>
-  These kinds of sites are often quite complex and heavy with 
-  <ulink url="http://en.wikipedia.org/wiki/Javascript";>Javascript</ulink> and 
-  thus <quote>fragile</quote>. So if <emphasis>still</emphasis> a problem, 
-  we have an <ulink
-  url="../user-manual/actions-file.html#ALIASES">alias</ulink> just for such
-  sticky situations:
- </para>
- <para>
-  <screen># Gmail is a _fragile_ site:
-#
-{ <literal>fragile</literal> }
- # Gmail is ...
- mail.google.com</screen>
- </para>
- <para>
-  Be sure to flush your browser's caches whenever making these kinds of
-  changes, just to make sure the changes <quote>take</quote>.
- </para>
- <para>
-  Make sure the domain, host and path are appropriate as well. Your browser can
-  tell you where you are specifically and you should use that information for 
-  your configuration settings. Note that above it is not referenced as 
-  <literal>gmail.com</literal>, which is a valid domain name.
- </para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="configfiles"> <title>What's the difference between the
-<quote>Cautious</quote>, <quote>Medium</quote> and <quote>Advanced</quote> defaults?</title>
- <para>
-  Configuring <application>Privoxy</application> is not entirely trivial. To
-  help you get started, we provide you with three different default action
-  <quote>profiles</quote> in the web based actions file editor at <ulink
-  url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>.
-  See the <ulink url="../user-manual/actions-file.html"><citetitle>User
-  Manual</citetitle></ulink> for a list of actions, and how the default 
-  profiles are set.
- </para>
-
-<para>
- Where the defaults are likely to break some sites, exceptions for
- known popular <quote>problem</quote> sites are included, but in
- general, the more aggressive your default settings are, the more exceptions
- you will have to make later. New users are best to start off in 
- <quote>Cautious</quote> setting. This is safest and will have the fewest 
- problems. See the <ulink
- url="../user-manual/index.html"><citetitle>User Manual</citetitle></ulink>
- for a more detailed discussion.
-</para>
-
-<para>
- It should be noted that the <quote>Advanced</quote> profile (formerly known 
- as the <quote>Adventuresome</quote> profile) is more
- aggressive, and will make use of some of 
- <application>Privoxy's</application> advanced features. Use at your own risk!
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="browseconfig"> <title>Why can I change the configuration 
-with a browser? Does that not raise security issues?</title>
- <para>
-  It may seem strange that regular users can edit the config files with their
-  browsers, although the whole <filename>/etc/privoxy</filename> hierarchy
-  belongs to the user <quote>privoxy</quote>, with only 644 permissions.
- </para>
- <para>
-  When you use the browser-based editor, <application>Privoxy</application>
-  itself is writing to the config files.  Because
-  <application>Privoxy</application> is running as the user <quote>privoxy</quote>,
-  it can update its own config files.
- </para>
- <para>
-  If you run <application>Privoxy</application> for multiple untrusted users (e.g. in
-  a LAN) or aren't entirely in control of your own browser, you will probably want
-  to make sure that the the web-based editor and remote toggle features are
-  <quote>off</quote> by setting <quote><literal><ulink
-  url="../user-manual/config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</ulink>
-  0</literal></quote> and <quote><literal><ulink
-  url="../user-manual/config.html#ENABLE-REMOTE-TOGGLE">enable-remote-toggle</ulink>
-  0</literal></quote> in the <ulink url="../user-manual/config.html">main configuration file</ulink>.
- </para>
- <para>
-  As of &my-app; 3.0.7 these options are disabled by default.
- </para>
-</sect2>
-
-
-<sect2 renderas="sect3">
-<title id="filterfile">What is the <filename>default.filter</filename> file? What is a <quote>filter</quote>?</title>
-<para>
- The <ulink url="../user-manual/filter-file.html"><filename>default.filter</filename></ulink>
- file is where <emphasis>filters</emphasis> as supplied by the developers are defined.
- Filters are a special subset of actions that can be used to modify or
- remove web page content or headers on the fly. Content filters can
- be applied to <emphasis>anything</emphasis> in the page source,
- header filters can be applied to either server or client headers.
- Regular expressions are used to accomplish this.
-</para>
-<para>
- There are a number of pre-defined filters to deal with common annoyances. The
- filters are only defined here, to invoke them, you need to use the
- <ulink
- url="../user-manual/actions-file.html#FILTER"><literal>filter</literal>
- action</ulink> in one of the actions files. Content filtering is automatically
- disabled for inappropriate MIME types, but if you now better than Privoxy
- what should or should not be filtered you can filter any content you like.
-</para>
-<para>
- Filters should
- <emphasis>not</emphasis> be confused with <ulink
- url="../user-manual/actions-file.html#BLOCK"><literal>blocks</literal></ulink>, which
- is a completely different action, and is more typically used to block ads and
- unwanted sites.
-</para>
-
-<para>
- If you are familiar with regular expressions, and HTML, you can look at 
- the provided <filename>default.filter</filename> with a text editor and define
- your own filters.  This is potentially a very powerful feature, but
- requires some expertise in both regular expressions and HTML/HTTP. 
- <![%p-newstuff;[ You should 
- place any modifications to the default filters, or any new ones you create 
- in a separate file, such as <filename>user.filter</filename>, so they won't 
- be overwritten during upgrades. 
- The ability to define multiple filter files 
- in <filename>config</filename> is a new feature as of v. 3.0.5.]]>
-</para>
-
-<para>
- There is no GUI editor option for this part of the configuration, 
- but you can disable/enable the various pre-defined filters of the included 
- <filename>default.filter</filename> file with the <ulink
- url="http://config.privoxy.org/show-status";>web-based actions file editor</ulink>.
- Note that the custom actions editor must be explicitly enabled in
- the main config file (see <ulink
- url="../user-manual/config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions</ulink>).
-</para>
-
-<para>
- If you intend to develop your own filters, you might want to have a look at
- <ulink
- url="http://www.fabiankeil.de/sourcecode/pft/";>Privoxy-Filter-Test</ulink>.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="lanconfig">
-<title>How can I set up Privoxy to act as a proxy for my 
- LAN?</title>
-<para>
- By default, <application>Privoxy</application> only responds to requests 
- from <literal>127.0.0.1</literal> (localhost). To have it act as a server for
- a network, this needs to be changed in the <ulink
- url="../user-manual/config.html">main configuration file</ulink>. Look for
- the <literal><ulink
- url="../user-manual/config.html#LISTEN-ADDRESS">listen-address</ulink></literal>
- option, which may be commented out with a <quote>#</quote> symbol. Make sure
- it is uncommented, and assign it the address of the LAN gateway interface,
- and port number to use. Assuming your LAN address is 192.168.1.1 and you
- wish to run <application>Privoxy</application> on port 8118, this line
- should look like:
-</para>
-
-<para>
- <screen>
-  listen-address  192.168.1.1:8118</screen>
-</para>
-
-<para>
- Save the file, and restart <application>Privoxy</application>. Configure 
- all browsers on the network then to use this address and port number.
-</para>
-
-<para>
- Alternately, you can have <application>Privoxy</application> listen on 
- all available interfaces:
-</para>
-
-<para>
- <screen>
-  listen-address    :8118</screen>
-</para>
-
-<para>
- And then use <application>Privoxy's</application> 
- <ulink
- url="../user-manual/config.html#PERMIT-ACCESS">permit-access</ulink> 
- feature to limit connections. A firewall in this situation is recommended 
- as well.
-</para>
-
-<para>
- The above steps should be the same for any TCP network, regardless of
- operating system.
-</para>
-
-<para>
- If you run <application>Privoxy</application> on a LAN with untrusted users,
- we recommend that you double-check the <ulink
- url="../user-manual/config.html#ACCESS-CONTROL">access control and security</ulink>
- options!
-</para>
-
-</sect2>
-
-
-<sect2 renderas="sect3">
-<title id="noseeum">Instead of ads, now I get a checkerboard pattern. I don't want to see anything.</title>
-<para>
- The replacement for blocked images can be controlled with the <ulink
- url="../user-manual/actions-file.html#SET-IMAGE-BLOCKER"><literal>set-image-blocker</literal>
- action</ulink>. You have the choice of a checkerboard pattern, a transparent 1x1 GIF
- image (aka <quote>blank</quote>), or a redirect to a custom image of your choice.
- Note that this choice only has effect for images which are blocked as images, i.e.
- whose URLs match both a <literal><ulink
- url="../user-manual/actions-file.html#HANDLE-AS-IMAGE">handle-as-image</ulink></literal>
- <emphasis>and</emphasis> <literal><ulink
- url="../user-manual/actions-file.html#BLOCK">block</ulink></literal> action.
-</para>
-<para>
- If you want to see nothing, then change the <ulink
- url="../user-manual/actions-file.html#SET-IMAGE-BLOCKER"><literal>set-image-blocker</literal>
- action</ulink> to <quote>blank</quote>. This can be done by editing the 
- <filename>user.action</filename> file, or through the <ulink
- url="http://config.privoxy.org/show-status";>web-based actions file editor</ulink>.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="whyseeum">Why would anybody want to see a checkerboard pattern?</title>
-<para>
- Remember that <link linkend="whatsanad">telling which image is an ad and which
- isn't</link>, is an educated guess. While we hope that the standard configuration
- is rather smart, it will make occasional mistakes. The checkerboard image is visually
- decent, and it shows you where images have been blocked, which can be very
- helpful in case some navigation aid or otherwise innocent image was
- erroneously blocked. It is recommended for new users so they can 
- <quote>see</quote> what is happening. Some people might also enjoy seeing how
- many banners they <emphasis>don't</emphasis> have to see.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="blockedbytext">I see some images being replaced with text
-instead of the checkerboard image. Why and how do I get rid of this?</title>
-<para>
- This happens when the banners are not embedded in the HTML code of the
- page itself, but in separate HTML (sub)documents that are loaded into (i)frames
- or (i)layers, and these external HTML documents are blocked. Being non-images
- they get replaced by a substitute HTML page rather than a substitute image,
- which wouldn't work out technically, since the browser expects and accepts
- only HTML when it has requested an HTML document. 
-</para>
-<para>
- The substitute page adapts to the available space and shows itself as a
- miniature two-liner if loaded into small frames, or full-blown with a
- large red "BLOCKED" banner if space allows.
-</para>
-<para>
- If you prefer the banners to be blocked by images, you must see to it that
- the HTML documents in which they are embedded are not blocked. Clicking
- the <quote>See why</quote> link offered in the substitute page will show
- you which rule blocked the page. After changing the rule and un-blocking
- the HTML documents, the browser will try to load the actual banner images
- and the usual image blocking will (hopefully!) kick in.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="srvany">
-<title>Can Privoxy run as a service 
-on Win2K/NT/XP?</title>
-<para>
-<![%p-newstuff;[
- Yes. Version 3.0.5 introduces full <application>Windows</application> service
- functionality. See <ulink url="../user-manual/installation.html#installation-pack-win">
- the <citetitle>User Manual</citetitle></ulink> for details on how to install and configure 
- <application>Privoxy</application> as a service.
-</para> 
-<para>
- Earlier ]]>3.x versions could run as a system service using <command>srvany.exe</command>.
- See the discussion at <ulink
- url="http://sourceforge.net/tracker/?func=detail&#38;atid=361118&#38;aid=485617&#38;group_id=11118";>http://sourceforge.net/tracker/?func=detail&#38;atid=361118&#38;aid=485617&#38;group_id=11118</ulink>,
- for details, and a sample configuration.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="otherproxy">
-<title>How can I make Privoxy work with other 
-proxies like Squid or Tor?</title>
-<para>
- This can be done and is often useful to combine the benefits of
- <application>Privoxy</application> with those of a another proxy.
- See the <ulink
- url="../user-manual/config.html#FORWARDING">forwarding chapter</ulink>
- in the <ulink url="../user-manual/index.html">User Manual</ulink> which
- describes how to do this, and the <link linkend="TOR">
- How do I use Privoxy together with 
- Tor</link> section below.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="port-80">
-<title>Can I just set Privoxy to use port 80
-and thus avoid individual browser configuration?</title>
-
-<para>
- No, its more complicated than that. This only works with special kinds 
- of proxies known as <quote>intercepting</quote> proxies (see below).
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="transparent">
-<title>Can Privoxy run as a <quote>transparent
-</quote> proxy?</title>
-<para>
- The whole idea of Privoxy is to modify client requests
- and server responses in all sorts of ways and therefore
- it's not a transparent proxy as described in
- <ulink url="http://tools.ietf.org/html/rfc2616";>RFC 2616</ulink>.
-</para>
-<para>
- However, some people say <quote>transparent proxy</quote> when they
- mean <quote>intercepting proxy</quote>. If you are one of them,
- please read the <ulink url="#intercepting">next entry</ulink>.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="intercepting">
-<title>Can Privoxy run as a <quote>intercepting</quote> proxy?</title>
-<para>
- <application>Privoxy</application> can't intercept traffic itself,
-  but it can handle requests that where intercepted and redirected
-  with a packet filter (like <application>PF</application> or
-  <application>iptables</application>), as long as the <literal>Host</literal>
-  header is present. 
-  </para>
-<para>
-  As the <literal>Host</literal> header is required by HTTP/1.1 and as most
-  web sites rely on it anyway, this limitation shouldn't be a problem.
-</para>
-<para>
-  Please refer to your packet filter's documentation to learn how to
-  intercept and redirect traffic into <application>Privoxy</application>.
-  Afterward you just have to configure <application>Privoxy</application> to
-  <ulink url="../user-manual/config.html#ACCEPT-INTERCEPTED-REQUESTS">accept
-  intercepted requests</ulink>.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="outlook">
-<title>How can I configure Privoxy for use with Outlook?</title>
-<para>
- Versions of <application>Outlook</application> prior to Office 2007, use
- <application>Internet Explorer</application> components to both render HTML,
- and fetch any HTTP requests that may be embedded in an HTML email. So however
- you have <application>Privoxy</application> configured to work with IE, this
- configuration should automatically be shared, at least with older version of
- Internet Explorer.
-</para>
-<para>
- Starting with Office 2007, Microsoft is instead using the MS-Word rendering
- engine with Outlook. It is unknown whether this can be configured to use a
- proxy.
- <!-- FIXME HB 2009-02-15 -->
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="outlook-more">
-<title>How can I have separate rules just for HTML mail?</title>
-<para>
- The short answer is, you can't. <application>Privoxy</application> has no way
- of knowing which particular application makes a request, so there is no way to
- distinguish between web pages and HTML mail.
- <application>Privoxy</application> just blindly proxies all requests. In the
- case of <application>Outlook Express</application> (see above), OE uses 
- IE anyway, and there is no way for <application>Privoxy</application> to ever 
- be able to distinguish between them (nor could any other proxy type application for
- that matter).
-</para>
-<para>
- For a good discussion of some of the issues involved (including privacy and 
- security issues), see 
- <ulink url="http://sourceforge.net/tracker/?func=detail&#38;atid=211118&#38;aid=629518&#38;group_id=11118";>http://sourceforge.net/tracker/?func=detail&#38;atid=211118&#38;aid=629518&#38;group_id=11118</ulink>.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="sneaky-cookies">
-<title>I sometimes notice cookies sneaking through. How?</title>
-<para>
- <ulink
- url="http://en.wikipedia.org/wiki/Browser_cookie";>Cookies</ulink> can be 
- set in several ways. The classic method is via the 
- <literal>Set-Cookie</literal> HTTP header. This is straightforward, and an
- easy one to manipulate, such as the &my-app; concept of 
- <ulink url="../user-manual/actions-file.html#SESSION-COOKIES-ONLY">session-cookies-only</ulink>.
- There is also the possibility of using 
-  <ulink url="http://en.wikipedia.org/wiki/Javascript";>Javascript</ulink> to
- set cookies (&my-app; calls these <literal>content-cookies</literal>). This
- is trickier because the syntax can vary widely, and thus requires a certain
- amount of guesswork. It is not realistic to catch all of these short of
- disabling Javascript, which would break many sites. And lastly, if the
- cookies are embedded in a HTTPS/SSL secure session via Javascript, they are beyond
- <application>Privoxy's</application> reach.
-</para>
-<para>
- All in all, &my-app; can help manage cookies in general, can help minimize
- the loss of privacy posed by cookies, but can't realistically stop all
- cookies.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="evil-cookies">
-<title>Are all cookies bad? Why?</title>
-<para>
- No, in fact there are many beneficial uses of 
- <ulink
- url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink>. Cookies are just a
- method that browsers can use to store data between pages, or between browser
- sessions. Sometimes there is a good reason for this, and the user's life is a
- bit easier as a result. But there is a long history of some websites taking
- advantage of this layer of trust, and using the data they glean from you and 
- your browsing habits for their own purposes, and maybe to your potential
- detriment. Such sites are using you and storing their data on your system.
- That is why the privacy conscious watch from whom those cookies come, and why
- they really <emphasis>need</emphasis> to be there.
-</para>
-<para>
-  See the 
-   <ulink url="http://en.wikipedia.org/wiki/Browser_cookie";>Wikipedia cookie
-  definition</ulink> for more.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="allow-cookies">
-<title>How can I allow permanent cookies for my trusted sites?</title>
-
-<para>
-  There are several actions that relate to cookies. The default behavior is to 
-  allow only <quote>session cookies</quote>, which means the cookies only last
-  for the current browser session. This eliminates most kinds of abuse related 
-  to cookies. But there may be cases where you want cookies to last.
-</para>
-<para>
-  To disable all cookie actions, so that cookies are allowed unrestricted,
-  both in and out, for <literal>example.com</literal>: 
-</para>
-<para>
- <screen>
- { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} }
-  .example.com</screen>
-</para>
-<para>
- Place the above in <filename>user.action</filename>. Note that some of these may
- be off by default anyway, so this might be redundant, but there is no harm
- being explicit in what you want to happen. <filename>user.action</filename>
- includes an alias for this situation, called
- <literal>allow-all-cookies</literal>.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="multiples">
-<title>Can I have separate configurations for different users?</title>
-<para>
- Each instance of <application>Privoxy</application> has its own
- configuration, including such attributes as the TCP port that it listens on.
- What you can do is run multiple instances of <application>Privoxy</application>, each with 
- a unique 
- <ulink url="../user-manual/config.html#LISTEN-ADDRESS">listen-address</ulink>
- configuration setting, and configuration path, and then
- each of these can have their own configurations. Think of it as per-port
- configuration.
-</para>
-<para> 
- Simple enough for a few users, but for large installations, consider having
- groups of users that might share like configurations.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="whitelists">
-<title>Can I set-up Privoxy as a whitelist of
-<quote>good</quote> sites?</title>
-<para>
- Sure. There are a couple of things you can do for simple white-listing.
- Here's one real easy one:
-</para>
- <screen>
- ############################################################
- # Blacklist
- ############################################################
- { <ulink url="../user-manual/actions-file.html#BLOCK">+block</ulink> }
- / # Block *all* URLs
- 
- ############################################################
- # Whitelist
- ############################################################
- { <ulink url="../user-manual/actions-file.html#BLOCK">-block</ulink> }
-  kids.example.com
-  toys.example.com
-  games.example.com</screen>
-<para>
- This allows access to only those three sites by first blocking all URLs, and 
- then subsequently allowing three specific exceptions.
-</para>
-<para>
- Another approach is <application>Privoxy's</application> 
- <literal>trustfile</literal> concept, which incorporates the notion of 
- <quote>trusted referrers</quote>. See the <ulink
- url="../user-manual/config.html#TRUSTFILE">Trust documentation</ulink>
- for details.
-</para>
-<para>
- These are fairly simple approaches and are not completely foolproof. There
- are various other configuration options that should be disabled (described
- elsewhere here and in <ulink url="../user-manual/">the User Manual</ulink>)
- so that users can't modify their own configuration and easily circumvent the
- whitelist.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="no-adblock">
-<title>How can I turn off ad-blocking?</title>
-<para>
- Ad blocking is achieved through a complex application of various &my-app; 
- <ulink url="../user-manual/actions-file.html">actions</ulink>. These 
- actions are deployed against simple images, banners, flash animations, 
- text pages, JavaScript, pop-ups and pop-unders, etc., so its not as simple as
- just turning one or two actions off. The various actions that make up
- &my-app; ad blocking are hard-coded into the default configuration files. It
- has been assumed that everyone using &my-app; is interested in this
- particular feature. 
- </para>
- <para>
- If you want to do without this, there are several approaches you can take:
- You can manually undo the many block rules in
- <filename>default.action</filename>. Or even easier, just create your own
- <filename>default.action</filename> file from scratch without the many ad
- blocking rules, and corresponding exceptions. Or lastly, if you are not
- concerned about the additional blocks that are done for privacy reasons, you
- can very easily over-ride <emphasis>all</emphasis> blocking with the
- following very simple rule in your <filename>user.action</filename>: 
- </para>
- <para>
- <screen>
- # Unblock everybody, everywhere
- { <ulink url="../user-manual/actions-file.html#BLOCK">-block</ulink> }
- / # UN-Block *all* URLs</screen>
-</para>
-<para> 
- Or even a more comprehensive reversing of various ad related actions:
-</para>
-<para>
- <screen>
- # Unblock everybody, everywhere, and turn off appropriate filtering, etc
- { <ulink url="../user-manual/actions-file.html#BLOCK">-block</ulink> \
-  <ulink url="../user-manual/actions-file.html#FILTER-BANNERS-BY-SIZE">-filter{banners-by-size}</ulink> \
-  <ulink url="../user-manual/actions-file.html#FILTER-BANNERS-BY-LINK">-filter{banners-by-link}</ulink> \
-  <literal>allow-popups</literal> \
- }
- / # UN-Block *all* URLs and allow ads</screen>
-</para>
-<para>
- This last <quote>action</quote> in this compound statement,
- <literal>allow-popups</literal>, is an <ulink
- url="../user-manual/actions-file.html#ALIASES">alias</ulink> that disables
- various pop-up blocking features.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="templates">
-<title>How can I have custom template pages, like the 
-<emphasis>BLOCKED</emphasis> page?</title>
-<para>
- &my-app; <quote>templates</quote> are specialized text files utilized by
- &my-app; for various purposes and can easily be modified using any text
- editor. All the template pages are installed in a sub-directory appropriately
- named: <filename>templates</filename>.  Knowing something about HTML syntax
- will of course be helpful.
-</para>
-<para>
- Be forewarned that the default templates are subject to being overwritten
- during upgrades. You can, however, create completely new templates,
- place them in another directory and specify the alternate path in the main
- <filename>config</filename>. For details, have a look at the <ulink
- url="../user-manual/config.html#templdir">templdir</ulink> option. 
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="blockall">
-<title>How can I remove the <quote>Go There Anyway</quote> link from 
-the <emphasis>BLOCKED</emphasis> page?</title>
-<para>
- There is more than one way to do it (although Perl is not involved).
-</para>
-<para>
- Editing the BLOCKED template page (see above) may dissuade some users, but
- this method is easily circumvented. Where you need this level of control, you
- might want to build &my-app; from source, and disable various features that are
- available as compile-time options. You should 
- <command>configure</command> the sources as follows:
-</para>
-<para>
- <screen>
- ./configure  --disable-toggle  --disable-editor  --disable-force</screen>
-</para>
-<para>
- This will create an executable with hard-coded security features so that
- &my-app; does not allow easy bypassing of blocked sites, or changing the
- current configuration via any connected user's web browser.
-</para>
-<para>
- Finally, all of these features can also be toggled on/off via options in
- <application>Privoxy's</application> main  <ulink
- url="../user-manual/config.html#ACCESS-CONTROL">config</ulink> file which
- means you don't have to recompile anything.
-</para>
-</sect2>
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1 id="misc"><title>Miscellaneous</title>
-
-<sect2 renderas="sect3">
-<title id="slowsme">How much does Privoxy slow my browsing down? This 
-has to add extra time to browsing.</title>
-<para>
- How much of an impact depends on many things, including the CPU of the host
- system, how aggressive the configuration is, which specific actions are being triggered, 
- the size of the page, the bandwidth of the connection, etc.
-</para>
-<para>
- Overall, it should not slow you down any in real terms, and may actually help 
- speed things up since ads, banners and other junk are not typically being
- retrieved and displayed. The actual processing time required by
- <application>Privoxy</application> itself for each page, is relatively small
- in the overall scheme of things, and happens very quickly. This is typically
- more than offset by time saved not downloading and rendering ad images and
- other junk content (if ad blocking is being used).
-</para>
-
-<para>
- <quote>Filtering</quote> content via the <literal><ulink
- url="../user-manual/actions-file.html#FILTER">filter</ulink></literal> or
- <literal><ulink
- url="../user-manual/actions-file.html#DEANIMATE-GIFS">deanimate-gifs</ulink></literal>
- actions may cause a perceived slowdown, since the entire document
- needs to be buffered before displaying. And on very large documents,
- filtering may have some measurable impact. How much depends on the page size,
- the actual definition of the filter(s), etc. See below. Most other actions
- have little to no impact on speed.
-</para>
-<para>
- Also, when filtering is enabled but zlib support isn't available, compression
- is often disabled (see <ulink
- url="../user-manual/actions-file.html#PREVENT-COMPRESSION">prevent-compression</ulink>).
- This can have an impact on speed as well, although it's probably smaller than
- you might think. Again, the page size, etc. will determine how much of an impact.
-</para>
-
-</sect2>
-
-
-<sect2 renderas="sect3" id="loadingtimes"><title>I notice considerable
-delays in page requests. What's wrong?</title>
-<para>
- If you use any <literal><ulink
- url="../user-manual/actions-file.html#FILTER">filter</ulink></literal> action,
- such as filtering banners by size, web-bugs etc, or the <literal><ulink
- url="../user-manual/actions-file.html#DEANIMATE-GIFS">deanimate-gifs</ulink></literal>
- action, the entire document must be loaded into memory in order for the filtering 
- mechanism to work, and nothing is sent to the browser during this time.
-</para>
-<para>
- The loading time typically does not really change much in real numbers, but
- the feeling is different, because most browsers are able to start rendering
- incomplete content, giving the user a feeling of "it works". This effect is
- more noticeable on slower dialup connections. Extremely large documents
- may have some impact on the time to load the page where there is filtering
- being done. But overall, the difference should be very minimal. If there is a
- big impact, then probably some other situation is contributing (like
- anti-virus software).
- </para>
-<para>
- Filtering is automatically disabled for inappropriate MIME types. But note 
- that if the web server mis-reports the MIME type, then content that should
- not be filtered, could be. <application>Privoxy</application> only knows how
- to differentiate filterable content because of the MIME type as reported by
- the server, or because of some configuration setting that enables/disables
- filtering.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="configurl"><title>What are "http://config.privoxy.org/"; and
-"http://p.p/";?</title>
-<para>
- <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink> is the
- address of <application>Privoxy</application>'s built-in user interface, and 
- <ulink url="http://p.p/";>http://p.p/</ulink> is a shortcut for it.
-</para>
-<para>
- Since <application>Privoxy</application> sits between your web browser and the Internet, 
- it can simply intercept requests for these addresses and answer them with its built-in
- <quote>web server</quote>.
-</para>
-<para>
- This also makes for a good test for your browser configuration: If entering the
- URL <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>
- takes you to a page saying <quote>This is Privoxy ...</quote>, everything is OK.
- If you get a page saying <quote>Privoxy is not working</quote> instead, then
- your browser didn't use <application>Privoxy</application> for the request,
- hence it could not be intercepted, and you have accessed the <emphasis>real</emphasis>
- web site at config.privoxy.org.
-</para>
-
-</sect2>
-
-<!--
- out of date 09/02/06 HB
-<sect2 renderas="sect3" id="blocklist"><title>Do you still maintain the blocklists?</title>
- <para>
-  No. The patterns for blocking now reside (among other things) in the <ulink
-  url="../user-manual/actions-file.html">actions files</ulink>, which are 
-  actively maintained instead. See next question ...
-</para>
-</sect2>
--->
-<sect2 renderas="sect3" id="newads"><title>How can I submit new ads, or report
-problems?</title>
-<para>
-Please see the <link linkend="contact">Contact section</link> for
-various ways to interact with the developers.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="newads2"><title>If I do submit missed ads, will 
-they be included in future updates?</title>
-<para>
- Whether such submissions are eventually included in the
- <filename>default.action</filename> configuration file depends on how 
- significant the issue is. We of course want to address any potential 
- problem with major, high-profile sites such as <citetitle>Google</citetitle>, 
- <citetitle>Yahoo</citetitle>, etc. Any site with global or regional reach, 
- has a good chance of being a candidate. But at the other end of the spectrum
- are any number of smaller, low-profile sites such as for local clubs or
- schools. Since their reach and impact are much less, they are best handled by
- inclusion in the user's <filename>user.action</filename>, and thus would be
- unlikely to be included. 
-</para>
-
-</sect2>
-
-
-<sect2 renderas="sect3" id="noonecares"><title>Why doesn't anyone answer my support 
-request?</title>
-<para>
-Rest assured that it has been read and considered. Why it is not answered,
-could be for various reasons, including no one has a good answer for it, no
-one has had time to yet investigate it thoroughly, it has been reported
-numerous times already, or because not enough information was provided to help
-us help you. Your efforts are not wasted, and we do appreciate them.
-</para>
-
-</sect2>
-
-
-<sect2 renderas="sect3" id="ip"><title>How can I hide my IP address?</title>
-<para>
- If you run both the browser and &my-app; locally, you cannot hide your IP
- address with <application>Privoxy</application> or ultimately any other
- software alone. The server needs to know your IP address so that it knows
- where to send the responses back. 
-</para>
-<para>
- There are many publicly usable "anonymous" proxies out there, which
- provide a further level of indirection between you and the web server.
-</para>
-<para>
- However, these proxies are called "anonymous" because you don't need
- to authenticate, not because they would offer any real anonymity.
- Most of them will log your IP address and make it available to the
- authorities in case you violate the law of the country they run in. In fact
- you can't even rule out that some of them only exist to *collect* information
- on (those suspicious) people with a more than average preference for privacy.
-</para>
-<para>
- If you want to hide your IP address from most adversaries,
- you should consider chaining <application>Privoxy</application>
- with <ulink url="https://www.torproject.org/";>Tor</ulink>.
- The configuration details can be found in
- <ulink url="#TOR">How do I use <application>Privoxy</application> together
- with <application>Tor</application> section</ulink>
- just below.
-</para>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="anonforsure">Can Privoxy guarantee I am anonymous?</title>
-<para>
- No. Your chances of remaining anonymous are improved, but unless you
- <ulink url="#TOR">chain <application>Privoxy</application> with <application>Tor</application></ulink>
- or a similar proxy and know what you're doing when it comes to configuring
- the rest of your system, you should assume that everything you do
- on the Web can be traced back to you.
-</para>
-<para>
- <application>Privoxy</application> can remove various information about you,
- and allows <emphasis>you</emphasis> more freedom to decide which sites 
- you can trust, and what details you want to reveal. But it neither 
- hides your IP address, nor can it guarantee that the rest of the system
- behaves correctly. There are several possibilities how a web sites can find
- out who you are, even if you are using a strict <application>Privoxy</application>
- configuration and chained it with <application>Tor</application>.
-</para>
-<para>
- Most of <application>Privoxy's</application> privacy-enhancing features can be easily subverted
- by an insecure browser configuration, therefore you should use a browser that can
- be configured to only execute code from trusted sites, and be careful which sites you trust.
- For example there is no point in having <application>Privoxy</application>
- modify the User-Agent header, if websites can get all the information they want
- through JavaScript, ActiveX, Flash, Java etc.
-</para>
-<para>
- A few browsers disclose the user's email address in certain situations, such
- as when transferring a file by FTP. <application>Privoxy</application>
- does not filter FTP. If you need this feature, or are concerned about the
- mail handler of your browser disclosing your email address, you might
- consider products such as <application>NSClean</application>.
-</para>
-<para>
- Browsers available only as binaries could use non-standard headers to give
- out any information they can have access to: see the manufacturer's license
- agreement. It's impossible to anticipate and prevent every breach of privacy
- that might occur. The professionally paranoid prefer browsers available as
- source code, because anticipating their behavior is easier. Trust the source,
- Luke!
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="proxytest">A test site says I am not using a Proxy.</title>
-<para>
- Good! Actually, they are probably testing for some other kinds of proxies.
- Hiding yourself completely would require additional steps.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="tor"><title>How do I use Privoxy
- together with Tor?</title>
-<para>
- Before you configure <application>Privoxy</application> to use
- <ulink url="https://www.torproject.org/";>Tor</ulink>,
- please follow the <citetitle>User Manual</citetitle> chapters
- <ulink url="../user-manual/installation.html">2. Installation</ulink> and
- <ulink url="../user-manual/startup.html">5. Startup</ulink> to make sure
- <application>Privoxy</application> itself is setup correctly.
-</para>
-<para> 
- If it is, refer to <ulink url="https://www.torproject.org/documentation.html";>Tor's
- extensive documentation</ulink> to learn how to install <application>Tor</application>,
- and make sure <application>Tor</application>'s logfile says that
- <quote>Tor has successfully opened a circuit</quote> and it
- <quote>looks like client functionality is working</quote>.
-</para>
-<para>
- If either <application>Tor</application> or <application>Privoxy</application>
- isn't working, their combination most likely will neither. Testing them on their
- own will also help you to direct problem reports to the right audience.
- If <application>Privoxy</application> isn't working, don't bother the
- <application>Tor</application> developers. If <application>Tor</application>
- isn't working, don't send bug reports to the <application>Privoxy</application> Team.
-</para>
-<para>
- If you verified that <application>Privoxy</application> and <application>Tor</application>
- are working, it is time to connect them. As far as <application>Privoxy</application>
- is concerned, <application>Tor</application> is just another proxy that can be reached
- by socks4 or socks4a. Most likely you are interested in <application>Tor</application>
- to increase your anonymity level, therefore you should use socks4a, to make sure DNS requests are
- done through <application>Tor</application> and thus invisible to your local network.
-</para>
-
-<![%p-newstuff;[
-<para>
- Since <application>Privoxy</application> 3.0.5, its
- <ulink url="../user-manual/config.html">main configuration file</ulink>
- is already prepared for <application>Tor</application>, if you are using a
- default <application>Tor</application> configuration and run it on the same
- system as &my-app;, you just have to edit the
- <ulink url="../user-manual/config.html#FORWARDING">forwarding section</ulink>
- and uncomment the line:
-</para>
-<para>
- <screen>
-#        forward-socks4a             /     127.0.0.1:9050 .
- </screen>
-</para>
-<para>
- This is enough to reach the Internet, but additionally you might want to
- uncomment the following forward rules, to make sure your local network is still
- reachable through Privoxy:
-</para>
-<para>
- <screen>
-#        forward         192.168.*.*/     .
-#        forward            10.*.*.*/     .
-#        forward           127.*.*.*/     .
- </screen>
-</para>
-<para>
- Unencrypted connections to systems in these address ranges will
- be as (un)secure as the local network is, but the alternative is
- that your browser can't reach the network at all. Then again,
- that may actually be desired and if you don't know for sure
- that your browser has to be able to reach the local network,
- there's no reason to allow it.
-</para>
-<para>
- If you want your browser to be able to reach servers in your local
- network by using their names, you will need additional exceptions
- that look like this:
-</para>
-<para>
- <screen>
-#        forward           localhost/     .
- </screen>
-</para>
-<para>
- Save the modified configuration file and open
- <ulink url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status/</ulink>
- in your browser, confirm that <application>Privoxy</application> has reloaded its configuration
- and that there are no other forward lines, unless you know that you need them. If everything looks good,
- refer to
- <ulink url="https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#IsMyConnectionPrivate";>Tor
- Faq 4.2</ulink> to learn how to verify that you are really using <application>Tor</application>.
-</para>
-<para>
- Afterward, please take the time to at least skim through the rest
- of <application>Tor's</application> documentation. Make sure you understand
- what <application>Tor</application> does, why it is no replacement for
- application level security, and why you probably don't want to
- use it for unencrypted logins.
-</para> ]]>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="sitebreak">Might some things break because header information or
-content is being altered?</title>
-
-<para>
- Definitely. It is common for sites to use browser type, browser version, 
- HTTP header content, and various other techniques in order to dynamically
- decide what to display and how to display it. What you see, and what I see,
- might be very different. There are many, many ways that this can be handled,
- so having hard and fast rules, is tricky.
-</para>
-
-<para>
- The <quote>User-Agent</quote> is sometimes used in this way to identify
- the browser, and adjust content accordingly.
-</para>
-
-<para>
- Also, different browsers use different encodings of non-English
- characters, certain web servers convert pages on-the-fly according to the
- User Agent header. Giving a <quote>User Agent</quote> with the wrong
- operating system or browser manufacturer causes some sites in these languages
- to be garbled; Surfers to Eastern European sites should change it to
- something closer. And then some page access counters work by looking at the
- <quote>Referer</quote> header; they may fail or break if unavailable. The
- weather maps of Intellicast have been blocked by their server when no
- <quote>Referer</quote> or cookie is provided, is another example. (But you
- can forge both headers without giving information away). There are
- many other ways things can go wrong when trying to fool a web server. The
- results of which could inadvertently cause pages to load incorrectly,
- partially, or even not at all. And there may be no obvious clues as to just
- what went wrong, or why. Nowhere will there be a message that says 
- <quote><emphasis>Turn off <literal>fast-redirects</literal> or else!</emphasis> 
- </quote>
-</para>
-
-<para>
- Similar thoughts apply to modifying JavaScript, and, to a lesser degree,
- HTML elements.
-</para>
-
-<para>
- If you have problems with a site, you will have to adjust your configuration 
- accordingly. Cookies are probably the most likely adjustment that may 
- be required, but by no means the only one.
-</para>
-
-</sect2>
-
-
-<sect2 renderas="sect3">
-<title id="caching">Can Privoxy act as a <quote>caching</quote> proxy to 
-speed up web browsing?</title>
-<para>
- No, it does not have this ability at all. You want something like 
- <ulink url="http://www.squid-cache.org/";>Squid</ulink> or
- <ulink url="http://www.pps.jussieu.fr/~jch/software/polipo/";>Polipo</ulink> for this.
- And, yes, before you ask, <application>Privoxy</application> can co-exist 
- with other kinds of proxies like <application>Squid</application>.
- See the <ulink url="../user-manual/config.html#FORWARDING">forwarding
- chapter</ulink> in the <ulink url="../user-manual/index.html">user
- manual</ulink> for details.
-</para>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="firewall">What about as a firewall? Can Privoxy protect me?</title>
-<para>
- Not in the way you mean, or in the way some firewall vendors claim they can. 
- <application>Privoxy</application> can help protect your privacy, but can't
- protect your system from intrusion attempts. It is, of course, perfectly possible
- to use <emphasis>both</emphasis>.
-</para>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="wasted">I have large empty spaces / a checkerboard pattern now where
-ads used to be. Why?</title>
-<para>
- It is technically possible to eliminate banners and ads in a way that frees
- their allocated page space. This could easily be done by blocking with 
- <application>Privoxy's</application> filters,
- and eliminating the <emphasis>entire</emphasis> image references from the
- HTML page source. 
-</para>
-<para>
- But, this would consume considerably more CPU resources (IOW, slow things
- down), would likely destroy the layout of some web pages which rely on the
- banners utilizing a certain amount of page space, and might fail in other
- cases, where the screen space is reserved (e.g. by HTML tables for instance).
- Also, making ads and banners disappear without any trace complicates
- troubleshooting, and would sooner or later be problematic.
-</para>
-<para>
- The better alternative is to instead let them stay, and block the resulting
- requests for the banners themselves as is now the case. This leaves either
- empty space, or the familiar checkerboard pattern.
-</para>
-<para>
- So the developers won't support this in the default configuration, but you
- can of course define appropriate filters yourself to achieve this.
-</para>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="ssl">How can Privoxy filter Secure (HTTPS) URLs?</title>
-<para>
- Since secure HTTP connections are encrypted SSL sessions between your browser
- and the secure site, and are meant to be reliably <emphasis>secure</emphasis>,
- there is little that <application>Privoxy</application> can do but hand the raw
- gibberish data though from one end to the other unprocessed.
-</para>
-<para>
- The only exception to this is blocking by host patterns, as the client needs
- to tell <application>Privoxy</application> the name of the remote server,
- so that <application>Privoxy</application> can establish the connection.
- If that name matches a host-only pattern, the connection will be blocked.
-</para>
-<para>
- As far as ad blocking is concerned, this is less of a restriction than it may
- seem, since ad sources are often identifiable by the host name, and often
- the banners to be placed in an encrypted page come unencrypted nonetheless
- for efficiency reasons, which exposes them to the full power of 
- <application>Privoxy</application>'s ad blocking.
-</para>
-<para>
- <quote>Content cookies</quote> (those that are embedded in the actual HTML or
- JS page content, see <literal><ulink
- url="../user-manual/actions-file.html#FILTER-CONTENT-COOKIES">filter{content-cookies}</ulink></literal>), 
- in an SSL transaction will be impossible to block under these conditions. 
- Fortunately, this does not seem to be a very common scenario since most 
- cookies come by traditional means.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="secure">Privoxy runs as a <quote>server</quote>. How 
-secure is it? Do I need to take any special precautions?</title>
-<para>
- On Unix-like systems, <application>Privoxy</application> can run as a non-privileged 
- user, which is how we recommend it be run. Also, by default
- <application>Privoxy</application> listens to requests from <quote>localhost</quote>
- only.
-</para>
-<para>
- The server aspect of <application>Privoxy</application> is not itself directly 
- exposed to the Internet in this configuration. If you want to have
- <application>Privoxy</application> serve as a LAN proxy, this will have to
- be opened up to allow for LAN requests. In this case, we'd recommend
- you specify only the LAN gateway address, e.g. 192.168.1.1, in the main 
- <application>Privoxy</application> configuration file and check all <ulink
- url="../user-manual/config.html#ACCESS-CONTROL">access control and security
- options</ulink>. All LAN hosts can then use this as their proxy address
- in the browser proxy configuration, but <application>Privoxy</application>
- will not listen on any external interfaces. ACLs can be defined in addition,
- and using a firewall is always good too. Better safe than sorry.
-</para>
-
-</sect2>
-
-<sect2 renderas="sect3" id="turnoff">
-<title>Can I temporarily disable Privoxy?</title>
-<para>
- &my-app; doesn't have a transparent proxy mode,
- but you can toggle off blocking and content filtering.
-</para>
-<para>
- The easiest way to do that is to point your browser
- to the remote toggle URL: <ulink
- url="http://config.privoxy.org/toggle";>http://config.privoxy.org/toggle</ulink>.
-</para>
-<para>
- See the <ulink url="../user-manual/appendix.html#BOOKMARKLETS">Bookmarklets section</ulink> 
- of the <citetitle>User Manual</citetitle> for an easy way to access this 
- feature. Note that this is a feature that may need to be enabled in the main 
- <filename>config</filename> file.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="reallyoff">
-<title>When <quote>disabled</quote> is Privoxy totally 
-out of the picture?</title>
-<para>
- No, this just means all optional filtering and actions are disabled.
- <application>Privoxy</application> is still acting as a proxy, but just 
- doing less of the things that <application>Privoxy</application> would
- normally be expected to do. It is still a <quote>middle-man</quote> in 
- the interaction between your browser and web sites. See below to bypass 
- the proxy.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="turnoff2">
-<title>How can I tell Privoxy to totally ignore certain sites?</title>
-<para>
- Bypassing a proxy, or proxying based on arbitrary criteria, is purely a browser
- configuration issue, not a &my-app; issue. Modern browsers typically do have
- settings for not proxying certain sites. Check your browser's help files.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="crunch">
-<title>My logs show Privoxy <quote>crunches</quote> 
-ads, but also its own internal CGI pages. What is a <quote>crunch</quote>?</title>
-<para>
- A <quote>crunch</quote> simply means <application>Privoxy</application> intercepted 
- <emphasis>something</emphasis>, nothing more. Often this is indeed ads or
- banners, but <application>Privoxy</application> uses the same mechanism for
- trapping requests for its own internal pages. For instance, a request for
- <application>Privoxy's</application> configuration page at: <ulink
- url="http://config.privoxy.org";>http://config.privoxy.org</ulink>, is
- intercepted (i.e. it does not go out to the 'net), and the familiar CGI
- configuration is returned to the browser, and the log consequently will show
- a <quote>crunch</quote>.
-</para>
-<para>
- Since version 3.0.7, Privoxy will also log the crunch reason.
- If you are using an older version you might want to upgrade.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="downloads">
-<title>Can Privoxy effect files that I download
-from a webserver? FTP server?</title>
-<para>
- From the webserver's perspective, there is no difference between
- viewing a document (i.e. a page), and downloading a file. The same is true of
- <application>Privoxy</application>. If there is a match for a <literal><ulink
- url="../user-manual/actions-file.html#BLOCK">block</ulink></literal> pattern,
- it will still be blocked, and of course this is obvious. 
- </para>
- <para>
- Filtering is potentially more of a concern since the results are not always
- so obvious, and the effects of filtering are there whether the file is simply
- viewed, or downloaded. And potentially whether the content is some obnoxious
- advertisement, or Mr. Jimmy's latest/greatest source code jewel. Of course,
- one of these presumably is <quote>bad</quote> content that we don't want, and
- the other is <quote>good</quote> content that we do want.
- <application>Privoxy</application> is blind to the differences, and can only
- distinguish <quote>good from bad</quote> by the configuration parameters
- <emphasis>we</emphasis> give it.
-</para>
-<para>
- <application>Privoxy</application> knows the differences in files according
- to the <quote>Content Type</quote> as reported by the webserver. If this is
- reported accurately (e.g. <quote>application/zip</quote> for a zip archive),
- then <application>Privoxy</application> knows to ignore these where
- appropriate. <application>Privoxy</application> potentially can filter HTML
- as well as plain text documents, subject to configuration parameters of
- course. Also, documents that are of an unknown type (generally assumed to be
- <quote>text/plain</quote>) can be filtered, as will those that might be
- incorrectly reported by the webserver. If such a file is a downloaded file
- that is intended to be saved to disk, then any content that might have been
- altered by filtering, will be saved too, for these (probably rare) cases.
-</para>
-<para>
- Note that versions later than 3.0.2 do NOT filter document types reported as 
- <quote>text/plain</quote>. Prior to this, <application>Privoxy</application>
- did filter this document type.
-</para>
-<para>
- In short, filtering is <quote>ON</quote> if a) the content type as reported
- by the webserver is appropriate <emphasis>and</emphasis> b) the configuration
- allows it (or at least does not disallow it). That's it. There is no magic
- cookie anywhere to say this is <quote>good</quote> and this is
- <quote>bad</quote>. It's the configuration that lets it all happen or not.
-</para>
-<para>
- If you download text files, you probably do not want these to be filtered,
- particularly if the content is source code, or other critical content. Source
- code sometimes might be mistaken for Javascript (i.e. the kind that might
- open a pop-up window). It is recommended to turn off filtering for download
- sites (particularly if the content may be plain text files and you are using
- version 3.0.2 or earlier) in your <filename>user.action</filename> file. And
- also, for any site or page where making <emphasis>any</emphasis> changes at
- all to the content is to be avoided.
-</para>
-<para>
- <application>Privoxy</application> does not do FTP at all, only HTTP 
- and HTTPS (SSL) protocols.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="downloads2">
-<title>I just downloaded a Perl script, and Privoxy
-altered it! Yikes, what is wrong!</title>
-<para>
- Please read above.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="hostsfile">
-<title>Should I continue to use a <quote>HOSTS</quote> file for ad-blocking?</title>
-<para>
- One time-tested technique to defeat common ads is to trick the local DNS
- system by giving a phony IP address for the ad generator in the local 
- <filename>HOSTS</filename> file, typically using <literal>127.0.0.1</literal>, aka 
- <literal>localhost</literal>. This effectively blocks the ad.
-</para>
-<para>
- There is no reason to use this technique in conjunction with 
- <application>Privoxy</application>. <application>Privoxy</application>
- does essentially the same thing, much more elegantly and with much more 
- flexibility. A large <filename>HOSTS</filename> file, in fact, not only
- duplicates effort, but may get in the way and seriously slow down your system.
- It is recommended to remove such entries from your <filename>HOSTS</filename> file. If you think 
- your hosts list is neglected by <application>Privoxy's </application> 
- configuration, consider adding your list to your <filename>user.action</filename> file:
-</para>
-<para>
- <screen>
-  { +block }
-   www.ad.example1.com
-   ad.example2.com
-   ads.galore.example.com
-   etc.example.com</screen>
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="seealso">
-<title>Where can I find more information about Privoxy
-and related issues?</title>
-<!-- Include seealso.sgml boilerplate: -->
- &seealso;
-<!-- end boilerplate -->
-
-<!--
-<para>
- Please see the 
- <ulink url="../user-manual/seealso.html">user-manual</ulink> for 
- others references.
-</para>
--->
-</sect2>
-
-<sect2 renderas="sect3" id="microsuck">
-<title>I've noticed that Privoxy changes <quote>Microsoft</quote> to 
-<quote>MicroSuck</quote>! Why are you manipulating my browsing?</title>
-
-<para>
- We're not. The text substitutions that you are seeing are disabled
- in the default configuration as shipped. You have either manually
- activated the <quote><literal>fun</literal></quote> filter which
- is clearly labeled <quote>Text replacements for subversive browsing
- fun!</quote> or you are using an older Privoxy version and have implicitly
- activated it by choosing the <quote>Advanced</quote> profile in the
- web-based editor. Please upgrade.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="valid">
-<title>Does Privoxy produce <quote>valid</quote> HTML (or XHTML)?</title>
-
-<para>
- Privoxy generates HTML in both its own <quote>templates</quote>, and possibly
- whenever there are text substitutions via a &my-app; filter. While this
- should always conform to the HTML 4.01 specifications, it has not been
- validated against this or any other standard. 
-</para>
-</sect2>
-
-
-</sect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1 id="trouble">
-<title>Troubleshooting</title>
-
-<sect2 renderas="sect3">
-<title id="refused">I cannot connect to any websites. Or, I am getting
-<quote>connection refused</quote> message with every web page. Why?</title>
-<para>
- There are several possibilities:
-</para>
-<para>
-<itemizedlist>
-<listitem><para>
-<application>Privoxy</application> is not running. Solution: verify 
- that &my-app; is installed correctly, has not crashed, and is indeed running.
- Turn on <application>Privoxy's</application> logging, and look at the logs to see what they say.
-</para></listitem>
- <listitem><para>Or your browser is configured for a different port than what
- <application>Privoxy</application> is using. Solution: verify that &my-app;
- and your browser are set to the same port (<literal>listen-address</literal>).
-</para></listitem>
- <listitem><para>Or if using a forwarding rule, you have a configuration problem or a
- problem with a host in the forwarding chain. Solution: temporarily alter your
- configuration and take the forwarders out of the equation.
-</para></listitem>
- <listitem><para>
-  Or you have a firewall that is interfering and blocking you. Solution: 
-  try disabling or removing the firewall as a simple test.
- </para></listitem>
-</itemizedlist>
-</para>
-
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 renderas="sect3" id="error503">
-<title>Why am I getting a 503 Error (WSAECONNREFUSED) on every page?</title>
- <para>
-  More than likely this is a problem with your TCP/IP networking. ZoneAlarm has
-  been reported to cause this symptom -- even if not running! The solution is
-  to either fight the ZA configuration, or uninstall ZoneAlarm, and then find
-  something better behaved in its place. Other personal firewall type products
-  may cause similar type problems if not configured correctly.
- </para>
-</sect2>
-
-<sect2 renderas="sect3">
-<title id="flushit">I just added a new rule, but the steenkin ad is 
-still getting through. How?</title>
-<para>
- If the ad had been displayed before you added its URL, it will probably be
- held in the browser's cache for some time, so it will be displayed without
- the need for any request to the server, and <application>Privoxy</application>
- will not be involved. Flush the browser's caches, and then try again.
-</para>
-
-<para>
- If this doesn't help, you probably have an error in the rule you
- applied. Try pasting the full URL of the offending ad into <ulink
- url="http://config.privoxy.org/show-url-info";>http://config.privoxy.org/show-url-info</ulink>
- and see if it really matches your new rule. Blocking ads is like blocking
- spam: a lot of tinkering is required to stay ahead of the game. And 
- remember you need to block the URL of the ad in question, which may be 
- entirely different from the site URL itself. Most ads are hosted on different
- servers than the main site itself. If you right-click on the ad, you should
- be able to get all the relevant information you need. Alternately, you can 
- find the correct URL by looking at <application>Privoxy's</application> logs
- (you may need to enable logging in the main config file if its disabled).
-</para>
-<para>
- Below is a slightly modified real-life log snippet that originates with one 
- requested URL: <literal>www.example.com</literal> (name of site was changed
- for this example, the number of requests is real). You can see in this the
- complexity of what goes into making up this one <quote>page</quote>. There
- are eight different domains involved here, with thirty two separate URLs
- requested in all, making up all manner of images, Shockwave Flash,
- JavaScript, CSS stylesheets, scripts, and other related content. Some of this
- content is obviously <quote>good</quote> or <quote>bad</quote>, but not all.
- Many of the more questionable looking requests, are going to outside domains
- that seem to be identifying themselves with suspicious looking names, making
- our job a little easier. &my-app; has <quote>crunched</quote> (meaning caught 
- and BLOCKED) quite a few items in this example, but perhaps missed a few as well. 
-</para>
-<para>
-<screen>
-<![CDATA[
-Request: www.example.com/
-Request: www.example.com/favicon.ico
-Request: img.example.com/main.css
-Request: img.example.com/sr.js
-Request: example.betamarker.com/example.html
-Request: www.lik-sang.com/Banners/bestsellers/skyscraper.php?likref=BSellers
-Request: img.example.com/pb.png
-Request: www.google-analytics.com/urchin.js crunch! (Blocked)
-Request: www.advertising-department.com/ats/switch.ps.php?26856 crunch! (Blocked)
-Request: img.example.com/p.gif
-Request: www.popuptraffic.com/assign.php?l=example&mode=behind crunch! (Blocked)
-Request: www.popuptraffic.com/scripts/popup.php?hid=5c3cf&tmpl=PBa.tmpl crunch! (Blocked)
-Request: www.popuptraffic.com/assign.php?l=example crunch! (Blocked)
-Request: www.lik-sang.com/Banners/best_sellers/best_sellers.css
-Request: www.adtrak.net/adx.js crunch! (Blocked)
-Request: img.example.com/hbg.gif
-Request: img.example.com/example.jpg
-Request: img.example.com/mt.png
-Request: img.example.com/mm.png
-Request: img.example.com/mb.png
-Request: www.popuptraffic.com/scripts/popup.php?hid=a71b91fa5&tmpl=Ua.tmp crunch! (Blocked)
-Request: www.example.com/tracker.js
-Request: www.lik-sang.com/Banners/best_sellers/lsi_head.gif
-Request: www.adtrak.net/adjs.php?n=020548130&what=zone:61 crunch! (Blocked)
-Request: www.adtrak.net/adjs.php?n=463594413&what=zone:58&source=Ua crunch! (Blocked)
-Request: www.lik-sang.com/Banners/best_sellers/bottomani.swf
-Request: mmm.elitemediagroup.net/install.php?allowpop=no&popupmincook=0&allowsp2=1 crunch! (Blocked)
-Request: www.example.com/tracker.js?screen=1400x1050&win=962x693
-Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=61 crunch! (Blocked)
-Request: 66.70.21.80/scripts/click.php?hid=5c3cf599a9efd0320d26&si
-Request: 66.70.21.80/img/pixel.gif
-Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=58&source=Ua&block=86400 crunch! (Blocked)
-Request: 66.70.21.80/scripts/click.php?hid=a71b9f6504b0c5681fa5&si=Ua
-]]>
-</screen>
-</para>
-<para>
- Despite 12 out of 32 requests being blocked, the page looked, and seemed to
- behave perfectly <quote>normal</quote> (minus some ads, of course).
-</para>
-
-</sect2>
-
-<sect2 id="badsite" renderas="sect3">
-<title >One of my favorite sites does not work with Privoxy.
-What can I do?</title>
-
-<para>
- First verify that it is indeed a <application>Privoxy</application> problem, 
- by toggling off <application>Privoxy</application> through <ulink
- url="http://config.privoxy.org/toggle";>http://config.privoxy.org/toggle</ulink>
- (the toggle feature may need to be enabled in the main
- <filename>config</filename>),
- and then shift-reloading the problem page (i.e. holding down the shift key
- while clicking reload. Alternatively, flush your browser's disk and memory
- caches).
-</para>
-
-<para>
- If the problem went away, we know we have a configuration related problem.
- Now go to <ulink
- url="http://config.privoxy.org/show-url-info";>http://config.privoxy.org/show-url-info</ulink>
- and paste the full URL of the page in question into the prompt. See which
- actions are being applied to the URL, and which matches in which actions
- files are responsible for that. It might be helpful also to look at your logs
- for this site too, to see what else might be happening (note: logging may need
- to be enabled in the main config file). Many sites are
- complex and require a number of related pages to help present their content.
- Look at what else might be used by the page in question, and what of that
- might be <emphasis>required</emphasis>.
- Now, armed with this information, go to
- <ulink
- url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>
- and select the appropriate actions files for editing. </para>
-<para>
- You can now either look for a section which disables the actions that
- you suspect to cause the problem and add a pattern for your site there,
- or make up a completely new section for your site. In any case, the recommended
- way is to disable only the prime suspect, reload the problem page, and only
- if the problem persists, disable more and more actions until you have
- identified the culprit. You may or may not want to turn the other actions
- on again. Remember to flush your browser's caches in between any such changes!
-</para>
-<para>
- Alternately, if you are comfortable with a text editor, you can accomplish 
- the same thing by editing the appropriate actions file. Probably the easiest 
- way to deal with such problems when editing by hand is to add your
- site to a <literal>{ fragile }</literal> section in <filename>user.action</filename>,
- which is an alias that turns off most <quote>dangerous</quote>
- actions, but is also likely to turn off more actions then needed, and thus lower
- your privacy and protection more than necessary, 
-</para>
-<para>
- Troubleshooting actions is discussed in more detail in the <ulink
- url="../user-manual/appendix.html#ACTIONSANAT">User Manual appendix,
- Troubleshooting: the Anatomy of an Action</ulink>.
- There is also an <ulink
- url="../user-manual/actions-file.html#ACT-EXAMPLES">actions tutorial</ulink>
- with general configuration information and examples.
-</para>
-<para>
- As a last resort, you can always see if your browser has a setting that will 
- bypass the proxy setting for selective sites. Modern browsers can do this.
-</para>
-
-</sect2>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="dun" renderas="sect3">
-<title>After installing Privoxy, I have to log in
-every time I start IE. What gives?</title>
-
-<para>
- This is a quirk that effects the installation of
- <application>Privoxy</application>, in conjunction with Internet Explorer and
- Internet Connection Sharing on Windows 2000 and Windows XP. The symptoms may
- appear to be corrupted or invalid DUN settings, or passwords.
-</para>
-
-<para>
- When setting up an NT based Windows system with
- <application>Privoxy</application> you may find that things do not seem to be
- doing what you expect. When you set your system up you will probably have set
- up Internet Connection Sharing (ICS) with Dial up Networking (DUN) when
- logged in with administrator privileges. You will probably have made this DUN
- connection available to other accounts that you may have set-up on your
- system. E.g. Mum or Dad sets up the system and makes accounts suitably
- configured for the kids.
-</para>
-
-<para>
- When setting up <application>Privoxy</application> in this environment you
- will have to alter the proxy set-up of Internet Explorer (IE) for the
- specific DUN connection on which you wish to use
- <application>Privoxy</application>. When you do this the ICS DUN set-up
- becomes user specific. In this instance you will see no difference if you
- change the DUN connection under the account used to set-up the connection.
- However when you do this from another user you will notice that the DUN
- connection changes to make available to "Me only". You will also find that
- you have to store the password under each different user!
-</para>
-
-<para>
- The reason for this is that each user's set-up for IE is user specific. Each
- set-up DUN connection and each LAN connection in IE store the settings for
- each user individually. As such this enforces individual configurations
- rather than common ones. Hence the first time you use a DUN connection after
- re-booting your system it may not perform as you expect, and prompt you for 
- the password. Just set and save the password again and all should be OK.
-</para>
-
-<para>
-[Thanks to Ray Griffith for this submission.]
-</para>
-</sect2>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="ftp" renderas="sect3">
-<title>I cannot connect to any FTP sites. Privoxy
- is blocking me.</title>
- <para>
-  <application>Privoxy</application> cannot act as a proxy for FTP traffic, 
-  so do not configure your browser to use <application>Privoxy</application>
-  as an FTP proxy. The same is true for <emphasis>any protocol other than HTTP
-  or HTTPS (SSL)</emphasis>. 
- </para>
- <para>
-  Most browsers understand FTP as well as HTTP. If you connect to a site, with
-  a URL like <literal>ftp://ftp.example.com</literal>, your browser is making
-  an FTP connection, and not a HTTP connection. So while your browser may 
-  speak FTP, <application>Privoxy</application> does not, and cannot proxy 
-  such traffic.
- </para>
- <para>
-  To complicate matters, some systems may have a generic <quote>proxy</quote>
-  setting, which will enable various protocols, including
-  <emphasis>both</emphasis> HTTP and FTP proxying! So it is possible to
-  accidentally enable FTP proxying in these cases. And of course, if this
-  happens, <application>Privoxy</application> will indeed cause problems since
-  it does not know FTP. <![%p-newstuff;[Newer version will give a sane error
-  message if a FTP connection is attempted.]]> Just disable the FTP setting 
-  and all will be well again.
- </para>
- <para>
-  Will <application>Privoxy</application> ever proxy FTP traffic? Unlikely.
-  There just is not much reason, and the work to make this happen is more than
-  it may seem.
- </para>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="macosxie" renderas="sect3">
-<title>In Mac OS X, I can't configure Microsoft Internet Explorer to use 
- Privoxy as the HTTP proxy.</title>
- <para>
-  Microsoft Internet Explorer (in versions like 5.1) respects system-wide
-  network settings.  In order to change the HTTP proxy, open System
-  Preferences, and click on the Network icon.  In the settings pane that
-  comes up, click on the Proxies tab.  Ensure the "Web Proxy (HTTP)" checkbox 
-  is checked and enter <literal>127.0.0.1</literal> in the entry field.  
-  Enter <literal>8118</literal> in the Port field.  The next time you start
-  IE, it should reflect these values.
- </para>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 renderas="sect3" id="macosxuninstall">
-<title>In Mac OS X, I dragged the Privoxy folder to the trash in order to 
- uninstall it. Now the finder tells me I don't have sufficient privileges to
- empty the trash.</title>
- <para>
- Note: This ONLY applies to privoxy 3.0.6 and earlier.
- </para> 
- <para>
-  Just dragging the <application>Privoxy</application> folder to the trash is
-  not enough to delete it. <application>Privoxy</application> supplies an
-  <application>uninstall.command</application> file that takes care of
-  these details. Open the trash, drag the <application>uninstall.command</application>
-  file out of the trash and double-click on it. You will be prompted for
-  confirmation and the administration password.
- </para> 
- <para>
-  The trash may still appear full after this command; emptying the trash 
-  from the desktop should make it appear empty again.
- </para>
-</sect2>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 renderas="sect3" id="macosximages">
-<title>In Mac OS X Panther (10.3), images often fail to load and/or I
- experience random delays in page loading. I'm using
- <literal>localhost</literal> as my browser's proxy setting.</title>
- <para>
-  We believe this is due to an IPv6-related bug in Mac OS X, but don't fully
-  understand the issue yet. In any case, changing the proxy setting to 
-  <literal>127.0.0.1</literal> instead of <literal>localhost</literal>
-  works around the problem.
- </para>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<!-- XXX: Is this still relevant now that we have gzip support? -->
-<sect2 renderas="sect3" id="blankpage">
-<title>I get a completely blank page at one site. <quote>View Source</quote>
- shows only: <markup><![CDATA[<html><body></body></html>]]></markup>. Without
- Privoxy the page loads fine.</title>
- <para>
-  Chances are that the site suffers from a bug in
-  <ulink url="http://www.php.net/";><application>PHP</application></ulink>,
-  which results in empty pages being sent if the client explicitly requests
-  an uncompressed page, like <application>Privoxy</application> does.
-  This bug has been fixed in PHP 4.2.3.
- </para>
- <para>
-  To find out if this is in fact the source of the problem, try adding
-  the site to a <literal>-prevent-compression</literal> section in
-  <filename>user.action</filename>:
- </para>
- <screen>
-   # Make exceptions for ill-behaved sites:                                     
-   #                                                                    
-   {-prevent-compression}                                               
-    .example.com</screen>
- <para>
-  If that works, you may also want to report the problem to the
-  site's webmasters, telling them to use zlib.output_compression
-  instead of ob_gzhandler in their PHP applications (workaround)
-  or upgrade to PHP 4.2.3 or later (fix).
- </para>
-</sect2>
-
-<sect2 renderas="sect3" id="nohostname">
-<title>My logs show many <quote>Unable to get my own hostname</quote> lines.
-Why?</title>
-<para>
- <application>Privoxy</application> tries to get the hostname of the system
- its running on from the IP address of the system interface it is bound to
- (from the <filename>config</filename> file
- <emphasis>listen-address</emphasis> setting). If the system cannot supply
- this information, <application>Privoxy</application> logs this condition. 
-</para>
-<para>
- Typically, this would be considered a minor system configuration error. It is
- not a fatal error to <application>Privoxy</application> however, but may
- result in a much slower response from <application>Privoxy</application> on
- some platforms due to DNS timeouts.
-</para>
-<para>
- This can be caused by a problem with the local <filename>hosts</filename>
- file. If this file has been changed from the original, try reverting it to
- see if that helps. Make sure whatever name(s) are used for the local system,
- that they resolve both ways.
-</para>
-<para>
- You should also be able to work around the problem with the
- <ulink url="../user-manual/config.html#HOSTNAME">hostname option</ulink>.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="inuse">
-<title>When I try to launch Privoxy, I get an 
-error message <quote>port 8118 is already in use</quote> (or similar wording).
-Why?</title>
-<para>
- Port 8118 is <application>Privoxy's</application> default TCP 
- <quote>listening</quote> port. Typically this message would mean that there
- is already one instance of <application>Privoxy</application> running, and
- your system is actually trying to start a second
- <application>Privoxy</application> on the same port, which will not work.
- (You can have multiple instances but they must be assigned different ports.)
- How and why this might happen varies from platform to platform, but you need
- to check your installation and start-up procedures.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="demoronizer">
-<title>
- Pages with UTF-8 fonts are garbled.
-</title>
-<para>
- This is caused by the <quote>demoronizer</quote> filter. You should either
- upgrade <application>Privoxy</application>, or at least upgrade to the most
- recent <filename>default.action</filename> file available from <ulink
- url="http://sourceforge.net/project/showfiles.php?group_id=11118";>SourceForge</ulink>.
- Or you can simply disable the demoronizer filter.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="demoronizer2">
-<title>
- Why are binary files (such as images) corrupted when Privoxy
- is used?
-</title>
-<para>
- This may also be caused by the <quote>demoronizer</quote> filter, 
- in conjunction with a web server that is misreporting the content type. Binary 
- files are exempted from <application>Privoxy's</application> filtering
- (unless the web server by mistake says the file is something else). Either
- upgrade <application>Privoxy</application>, or go to the most recent
- <filename>default.action</filename> file available from <ulink
- url="http://sourceforge.net/project/showfiles.php?group_id=11118";>SourceForge</ulink>.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="demoronizer3">
-<title>
- What is the <quote>demoronizer</quote> and why is it there?
-</title>
-<para>
- The original demoronizer was a Perl script that cleaned up HTML pages which 
- were created with certain Microsoft products. MS has used proprietary extensions 
- to standardized font encodings (ISO 8859-1), which has caused problems for pages
- that are viewed with non-Microsoft products (and are expecting to see a
- standard set of fonts). The demoronizer corrected these errors so the pages
- displayed correctly. <application>Privoxy</application> borrowed from this
- script, introducing a filter based on the original demoronizer, which in turn could
- correct these errors on the fly. 
-</para>
-<para>
- But this is only needed in some situations, and will cause serious problems in some 
- other situations.
-</para>
-<para>
- If you are using Microsoft products, you do not need it. If you need to view 
- pages with UTF-8 characters (such as Cyrillic or Chinese), then it will 
- cause corruption of the fonts, and thus <emphasis>should not be on</emphasis>.
-</para>
-<para>
- On the other hand, if you use non-Microsoft products, and you occasionally 
- notice weird characters on pages, you might want to try it.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="windowopen">
-<title>
- Why do I keep seeing <quote>PrivoxyWindowOpen()</quote> in raw source code?
-</title>
-<para>
- <application>Privoxy</application> is attempting to disable malicious 
-  <ulink url="http://en.wikipedia.org/wiki/Javascript";>Javascript</ulink> 
-  in this case, with the <literal>unsolicited-popups</literal>
- filter. <application>Privoxy</application> cannot tell very well 
- <quote>good</quote> code snippets from <quote>bad</quote> code snippets.
-</para>
-<para>
- If you see this in HTML source, and the page displays without problems, then 
- this is good, and likely some pop-up window was disabled. If you see this 
- where it is causing a problem, such as a downloaded program source code file, 
- then you should set an exception for this site or page such that the
- integrity of the page stays in tact by disabling all filtering.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="dnserrors">
-<title>
- I am getting too many DNS errors like <quote>404 No Such Domain</quote>. Why
- can't Privoxy do this better?
-</title>
-<para>
- There are potentially several factors here. First of all, the DNS resolution
- is done by the underlying operating system -- not
- <application>Privoxy</application> itself. <application>Privoxy</application>
- merely initiates the process and hands it off, and then later reports
- whatever the outcome was and tries to give a coherent message if there seems
- to be a problem. In some cases, this might otherwise be mitigated by the
- browser itself which might try some work-arounds and alternate approaches (e.g
- adding <quote>www.</quote> to the URL).
-</para>
-<para>
- In other cases, if <application>Privoxy</application> is being chained
- with another proxy, this could complicate the issue, and cause undue
- delays and timeouts. In the case of a <quote>socks4a</quote> proxy, the socks
- server handles all the DNS.  <application>Privoxy</application> would just be
- the <quote>messenger</quote> which is reporting whatever problem occurred
- downstream, and not the root cause of the error.
-</para>
-<![%p-newstuff;[
-<para>
- In any case, versions newer than 3.0.3 include various improvements to help
- <application>Privoxy</application> better handle these cases.
-</para>]]>
-</sect2>
-
-<sect2 renderas="sect3" id="allcpu">
-<title>
- At one site Privoxy just hangs, and starts taking 
- all CPU. Why is this?
-</title>
-<para>
- This is probably a manifestation of the <quote>100% cpu</quote> problem that
- occurs on pages containing many (thousands upon thousands) of blank lines. The blank lines 
- are in the raw HTML source of the page, and the browser just ignores them. But the 
- pattern matching in <application>Privoxy's</application> page filtering
- mechanism is trying to match against absurdly long strings and this becomes
- very CPU-intensive, taking a long, long time to complete.
-</para>
-<para>
- Until a better solution comes along, disable filtering on these pages,
- particularly the <literal>js-annoyances</literal> and
- <literal>unsolicited-popups</literal> filters. If you run into this problem
- with a recent &my-app; version, please send a problem report.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="slowcrawl">
-<title>I just installed Privoxy, and all my
-browsing has slowed to a crawl. What gives? </title>
-<para>
- This should not happen, and for the overwhelming number of users world-wide,
- it does not happen. I would suspect some inadvertent interaction of software
- components such as anti-virus software, spyware protectors, personal
- firewalls or similar components. Try disabling (or uninstalling) these one
- at a time and see if that helps. Either way, if you are using a
- recent &my-app; version, please report the problem.
-</para>
-</sect2>
-
-<sect2 renderas="sect3" id="preventcomp">
-<title>Why do my filters work on some sites but not on others? </title>
-<para>
- It's probably due to compression. It is a common practice for web servers to
- send their content <quote>compressed</quote> in order to speed things up, and
- then let the browser <quote>uncompress</quote> them. When compiled with zlib support
- &my-app; can decompress content before filtering, otherwise you may want to enable
-<ulink
- url="../user-manual/actions-file.html#PREVENT-COMPRESSION">prevent-compression</ulink>.
-</para>
-<para>
- As of &my-app; 3.0.9, zlib support is enabled in the default builds.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="ssl-warnings">
-<title>On some HTTPS sites my browser warns me about unauthenticated content,
- the URL bar doesn't get highlighted and the lock symbol appears to be broken.
- What's going on?</title>
-<para>
- Probably the browser is requesting ads through HTTPS and &my-app;
- is blocking the requests. Privoxy's error messages are delivered
- unencrypted and while it's obvious for the browser that the HTTPS
- request is already blocked by the proxy, some warn about unauthenticated
- content anyway.
-</para>
-<para>
- To work around the problem you can redirect those requests to an invalid
- local address instead of blocking them. While the redirects aren't
- encrypted either, many browsers don't care. They simply follow the
- redirect, fail to reach a server and display an error message instead
- of the ad.
-</para>
-<para>
- To do that, enable logging to figure out which requests get blocked by
- &my-app; and add the hosts (no path patterns) to a section like this:
-</para>
-<para>
-<screen>
-<![CDATA[
-{+redirect{http://127.0.0.1:0/} -block -limit-connect}
-.ivwbox.de:443/
-]]>
-</screen>
-</para>
-<para>
- Additionally you have to configure your browser to contact
- <quote>127.0.0.1:0</quote> directly (instead of through &my-app;).
-</para>
-<para>
- To add a proxy exception in <application>Mozilla Firefox</application>
- open the <quote>Preferences</quote>, click the <quote>Settings</quote>
- button located on the <quote>Network</quote> tab in the <quote>Advanced</quote>
- section, and add <quote>127.0.0.1:0</quote> in the <quote>No Proxy for:</quote>
- field.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="se-linux">
-<title>I get selinux error messages. How can I fix this?</title>
-<para>
- Please report the problem to the creator of your selinux policies.
-</para>
-<para>
- The problem is that some selinux policy writers aren't familiar
- with the application they are trying to <quote>secure</quote> and
- thus create policies that make no sense.
-</para>
-<para>
- In <application>Privoxy's</application> case the problem usually
- is that the policy only allows outgoing connections for certain
- destination ports (e.g. 80 and 443). While this may cover the
- standard ports, websites occasionally use other ports as well.
- This isn't a security problem and therefore <application>Privoxy's</application>
- default configuration doesn't block these requests.
-</para>
-<para>
- If you really want to block these ports (and don't be able
- to load websites that don't use standard ports), you should
- configure Privoxy to block these ports as well, so it doesn't
- trigger the selinux warnings.
-</para>
-</sect2>
-
-
-<sect2 renderas="sect3" id="gentoo-ricers">
-<title>I compiled &my-app; with Gentoo's portage and it appears to be very slow. Why?</title>
-<para>
- Probably you unintentionally compiled &my-app; without threading support
- in which case requests have to be serialized and only one can be served
- at the same time.
-</para>
-<para>
- Check your <quote>USE</quote> flags and make sure they include
- <quote>threads</quote>. If they don't, add the flag and rebuild &my-app;.
-</para>
-<para>
- If you compiled &my-app; with threading support (on POSIX-based systems),
- the <quote>Conditional #defines</quote> section on <ulink
- url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>
- will list <quote>FEATURE_PTHREAD</quote> as <quote>enabled</quote>. 
-</para>
-</sect2>
-
-
-</sect1>
-
-  <!--   ~~~~~       New section      ~~~~~     -->
-  <sect1 id="contact"><title>Contacting the developers, Bug Reporting and Feature Requests</title>
-<!-- Include contacting.sgml  -->
- &contacting;
-<!-- end contacting -->
-  </sect1>
-  
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="copyright"><title>Privoxy Copyright, License and History</title>
-
- <!-- Include copyright.sgml -->
-  &copyright;
- <!-- end -->
-  
-
-  <para>
-   Portions of this document are <quote>borrowed</quote> from the original
-   <application>Junkbuster</application> (tm) FAQ, and modified as 
-   appropriate for <application>Privoxy</application>.
-  </para>
-
- <!--   ~~~~~       New section      ~~~~~     -->
- <sect2><title>License</title>
- <!-- Include copyright.sgml: -->
-  &license;
- <!-- end copyright -->
- </sect2>
- <!--  ~  End section  ~  -->
-
- <!--   ~~~~~       New section      ~~~~~     -->
- <sect2><title>History</title>
- <!-- Include history.sgml -->
-  &history;
- <!-- end -->
- </sect2>
-
- </sect1>
- <!--  ~  End section  ~  -->
- 
-  
-<!--   ~~~~~       New section      ~~~~~     -->
-<!--
-<sect1 id="seealso"><title>See also</title>
--->
-<!-- Include seealso.sgml -->
-<!--
- &see;
--->
-<!-- end  -->
-<!--
-</sect1>
--->
-
-<!-- hhmts end -->
- <!--
- Tue 09/11/01 06:38:14 PM EST: Test SGML doc by Hal Burgiss.
- 
- This program is free software; you can redistribute it 
- and/or modify it under the terms of the GNU General
- Public License as published by the Free Software
- Foundation; either version 2 of the License, or (at
- your option) any later version.
-
- This program is distributed in the hope that it will
- be useful, but WITHOUT ANY WARRANTY; without even the
- implied warranty of MERCHANTABILITY or FITNESS FOR A
- PARTICULAR PURPOSE.  See the GNU General Public
- License for more details.
-
- The GNU General Public License should be included with
- this file.  If not, you can view it at
- http://www.gnu.org/copyleft/gpl.html
- or write to the Free Software Foundation, Inc., 
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
-
-$Log: faq.sgml,v $
-Revision 2.58  2009/03/21 12:27:44  fabiankeil
-Turn the donation entry title into a question,
-also rephrase the content a bit.
-
-Revision 2.57  2009/03/19 19:07:49  fabiankeil
-First draft of a "Donating" entry. To be polished tomorrow.
-
-Revision 2.56  2009/02/19 17:05:05  fabiankeil
-Explain slowness when build with Gentoo's portage.
-
-Revision 2.55  2009/02/19 02:20:21  hal9
-Make some links in seealso conditional. Man page is now privoxy only links.
-
-Revision 2.54  2009/02/15 20:47:12  hal9
-Fix small typo.
-
-Revision 2.53  2009/02/15 20:46:13  hal9
-Update Outlook HTML rendering engine comments re: Office 2007.
-
-Revision 2.52  2009/02/14 10:27:52  fabiankeil
-Finish last paragraph in the selinux entry which
-I unintentionally committed with the last commit.
-
-Revision 2.51  2009/02/12 16:08:26  fabiankeil
-Declare the code stable.
-
-Revision 2.50  2009/02/11 18:13:36  fabiankeil
-State the obvious.
-
-Revision 2.49  2009/02/10 16:30:20  fabiankeil
-Add a workaround for "unauthenticated content" warnings on HTTPS sites.
-
-Revision 2.48  2009/01/13 16:50:35  fabiankeil
-The standard.action file is gone.
-
-Revision 2.47  2008/11/24 18:29:39  fabiankeil
-Two changes suggested by Roger Dingledine:
-- Use https://www.torproject.org/ in section 4.7, too.
-- Replace the Tor wiki URL in section 4.10 with one
-  with a more useful anchor name.
-
-Revision 2.46  2008/08/30 15:37:35  fabiankeil
-Update entities.
-
-Revision 2.45  2008/08/16 08:51:28  fabiankeil
-Update version-related entities.
-
-Revision 2.44  2008/06/19 01:41:36  hal9
-Add short note about zlib being enabled in 3.0.9
-
-Revision 2.43  2008/06/14 13:21:25  fabiankeil
-Prepare for the upcoming 3.0.9 beta release.
-
-Revision 2.42  2008/06/07 13:11:15  fabiankeil
-- Note that the "100% cpu problem" is worth
-  reporting if it happens with a recent release.
-- Mention the hostname option as a workaround for
-  the "can't get my own hostname" issue.
-- The profile formerly known as "Adventuresome"
-  is called "Advanced" now.
-- Some white-space fixes.
-
-Revision 2.41  2008/06/06 15:32:09  fabiankeil
-- Minor rewordings.
-- Don't claim that all the old Junkbuster features remain.
-  Some of them have been removed or replaced with better ones.
-
-Revision 2.40  2008/02/22 05:54:27  markm68k
-updates for mac os x
-
-Revision 2.39  2008/02/03 21:37:41  hal9
-Apply patch from Mark: s/OSX/OS X/
-
-Revision 2.38  2008/01/19 17:52:39  hal9
-Re-commit to fix various minor issues for new release.
-
-Revision 2.37  2008/01/19 15:03:05  hal9
-Doc sources tagged for 3.0.8 release.
-
-Revision 2.36  2008/01/17 01:49:51  hal9
-Change copyright notice for docs s/2007/2008/. All these will be rebuilt soon
-enough.
-
-Revision 2.35  2007/11/19 17:57:59  fabiankeil
-A bunch of rewordings, minor updates and fixes.
-
-Revision 2.34  2007/11/19 02:38:11  hal9
-Minor revisions and rebuild
-
-Revision 2.33  2007/11/15 03:30:20  hal9
-Results of spell check.
-
-Revision 2.32  2007/11/13 03:03:42  hal9
-Various changes to reflect new features and revised configuration for the
-upcoming release.
-
-Revision 2.31  2007/11/05 02:34:53  hal9
-Various changes in preparation for the upcoming release. Much yet to be done.
-
-Revision 2.30  2007/11/04 15:16:40  hal9
-Fix one silly typo.
-
-Revision 2.29  2007/11/04 15:12:47  hal9
-Various minor adjustments.
-
-Revision 2.28  2007/10/27 15:14:16  fabiankeil
-Change Tor links to use the new domain torproject.org.
-
-Revision 2.27  2007/10/22 19:47:05  fabiankeil
-- Bump version and copyright.
-- Adjust Tor section to make it clear that forward exceptions
-  aren't required and may not even be desired.
-- A bunch of other minor rewordings.
-- Fix markup problems Roland noticed (hopefully without adding new ones).
-
-Revision 2.26  2007/08/05 15:37:55  fabiankeil
-- Don't claim that thousands of people read our code.
-- Specify the GPL version and link to GPLv2 instead of v3.
-- Note that configuration syntax may change between releases.
-- Mention zlib support.
-- Answer the "transparent proxy" question properly.
-- Add "intercepting proxy" entry.
-- Mention Polipo.
-- Rephrase some other sentences for various reasons.
-
-Revision 2.25  2007/07/18 11:00:34  hal9
-Add misc note about valid mark-up in Privoxy.
-
-Revision 2.24  2006/11/14 01:57:46  hal9
-Dump all docs prior to 3.0.6 release. Various minor changes to faq and user
-manual.
-
-Revision 2.23  2006/10/21 22:19:52  hal9
-Two new FAQs, a rewrite or two, and some touch ups.
-
-Revision 2.22  2006/10/14 20:33:10  hal9
-Three new FAQ's re: templates and blocking, and various minor touch-ups/improvements.
-
-Revision 2.21  2006/10/03 14:40:51  fabiankeil
-Added links from the Tor faq to the
-configuration chapter in the User Manual.
-
-Revision 2.20  2006/09/26 10:12:37  fabiankeil
-Spelling fix.
-
-Revision 2.19  2006/09/22 10:54:32  hal9
-Change references to 3.0.4 to 3.0.5 and minor adjustments.
-
-Revision 2.18  2006/09/22 01:27:55  hal9
-Final commit of probably various minor changes here and there. Unless
-something changes this should be ready for pending release.
-
-Revision 2.17  2006/09/17 14:56:32  hal9
-This includes yet several more new FAQs, some improved wording, enhanced
-mark-up, various hyper links to wikipedia to explain key terminology to the
-uninitiated, etc. This is ready for release IMO pending final tagging of cvs
-and Privoxy version stamping.
-
-Revision 2.16  2006/09/10 15:30:46  hal9
-Spell check.
-
-Revision 2.15  2006/09/08 23:05:07  hal9
-Fix broken links. Add faq on hosts files. Move most of new windows service
-feature to user manual and reference in faq. Various other small changes.
-
-Revision 2.14  2006/09/05 13:25:12  david__schmidt
-Add Windows service invocation stuff (duplicated) in FAQ and in user manual under Windows startup.  One probably ought to reference the other.
-
-Revision 2.13  2006/09/04 19:20:33  fabiankeil
-Adjusted anonymity related sections to match reality.
-Added a section about using Privoxy with Tor.
-
-Revision 2.12  2006/09/03 14:15:30  hal9
-Various updates, including 7 or 8 new FAQs, and updates/changes to various
-other ones to better reflect improvements, additions and changes for the
-upcoming release. This is close to final form for 3.0.4 IMHO.
-
-Revision 2.11  2006/07/18 14:48:50  david__schmidt
-Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-with what was really the latest development (the v_3_0_branch branch)
-
-Revision 1.61.2.41  2004/04/05 13:44:05  oes
-Fixed allow-all-cookies alias name; closes SR #929746
-
-Revision 1.61.2.40  2004/01/30 17:00:33  oes
-Added Mac OS X Panther problem
-
-Revision 1.61.2.39  2004/01/29 22:53:08  hal9
-Minor changes for exempting docs of text/plain. Change copyright date.
-
-Revision 1.61.2.38  2003/12/10 03:39:45  hal9
-Added FAQs for: demoronizer, related problems and why its included. Also,
-port 8118 already in use questions, and PrivoxyWindowOpen() questions. All in
-troubleshooting section.
-
-Revision 1.61.2.37  2003/10/17 11:01:50  oes
-Added Q&A for "not being used" page problem
-
-Revision 1.61.2.36  2003/06/26 23:49:20  hal9
-More on the filter/source code problem.
-
-Revision 1.61.2.35  2003/06/26 13:38:08  hal9
-Add FAQ on whether configuring Privoxy is necessary or not.
-
-Revision 1.61.2.34  2003/06/26 03:00:03  hal9
-Sorry, found another copyright date.
-
-Revision 1.61.2.33  2003/06/26 02:57:05  hal9
-Fix typo (finally!) and very minor modifications.
-
-Revision 1.61.2.32  2003/06/26 02:52:04  hal9
-Test, no changes.
-
-Revision 1.61.2.31  2003/06/25 01:27:51  hal9
-Fix copyright, and a few nits.
-
-Revision 1.61.2.30  2003/06/25 01:13:52  hal9
-Add:
-
- - FAQ on "Unable to get my own hostname"
- - Another one on filtering effects on text files.
-
-Revision 1.61.2.29  2003/06/15 21:32:58  hal9
-Add to the 4.17 (filtering effects on downloaded files).
-
-Revision 1.61.2.28  2003/03/18 19:37:21  oes
-s/Advanced|Radical/Adventuresome/g to avoid complaints re fun filter
-
-Revision 1.61.2.27  2002/12/01 06:31:58  hal9
-Add faq on win32 error 503 due to ZoneAlarm.
-
-Revision 1.61.2.26  2002/11/17 06:41:06  hal9
-Move default profiles table from FAQ to U-M, and other minor related changes.
-Add faq on cookies.
-
-Revision 1.61.2.25  2002/10/29 03:21:50  hal9
-Add 3 Q/A's relating to HTML in email. Other minor touchups.
-
-Revision 1.61.2.24  2002/10/15 12:50:22  oes
-s/Advanced/Radical/ (stupid me)
-
-Revision 1.61.2.23  2002/10/15 12:38:56  oes
-Added Microsuck faq; more detail for PHP problem
-
-Revision 1.61.2.22  2002/10/12 01:13:13  hal9
-Updates for demoronizer, more commentary on Radical profile, and update on
-the srvany.exe/icon fix.
-
-Revision 1.61.2.21  2002/10/10 04:09:35  hal9
-s/Advanced/Radical/ and added very brief note.
-
-Revision 1.61.2.20  2002/09/26 01:22:45  hal9
-Small additions for LAN setup, content-cookies/SSL, and FTP non-support.
-
-Revision 1.61.2.19  2002/08/25 23:31:56  hal9
-Fix one grammatical error. Add brief FAQ relating to tranparent proxies (ie
-port 80 setting). Add FAQ on effects of Privoxy on downloaded files
-(especially filtering).
-
-Revision 1.61.2.18  2002/08/14 16:39:37  hal9
-Fix wrong tag on FAQ addition.
-
-Revision 1.61.2.17  2002/08/14 00:01:18  hal9
-Add a crunch FAQ.
-
-Revision 1.61.2.16  2002/08/13 00:10:38  hal9
-Add faq to troubleshooting re: blank page syndrome, ie {-prevent-compression}.
-
-Revision 1.61.2.15  2002/08/10 11:34:22  oes
-Add disclaimer about probably being out-of-date
-
-Revision 1.61.2.14  2002/08/07 02:53:43  hal9
-Fix some minor markup errors, and move one Mac OS X Q/A to troubleshooting section.
-
-Revision 1.61.2.13  2002/08/06 11:55:32  oes
-Added missing close tag
-
-Revision 1.61.2.12  2002/08/06 11:43:46  david__schmidt
-Updated Mac OS X uninstall FAQ... we have an uninstall script now.
-
-Revision 1.61.2.11  2002/08/06 08:54:03  oes
-Style police: Fixed formatting details
-
-Revision 1.61.2.10  2002/08/02 14:00:25  david__schmidt
-Made the Mac OS X removal commands far less dangerous
-
-Revision 1.61.2.9  2002/08/02 13:14:45  oes
-Added warning about sudo rm -r for Mac OS X deinstallation; moved this item to install section
-
-Revision 1.61.2.8  2002/08/02 02:01:42  david__schmidt
-Add FAQ item for MSIE on Mac OS X HTTP proxy confusion
-
-Revision 1.61.2.7  2002/08/02 01:46:01  david__schmidt
-Added FAQ item for Mac OS X uninstall woes
-
-Revision 1.61.2.6  2002/07/30 20:04:56  hal9
-Fix typo: 'schould'.
-
-Revision 1.61.2.5  2002/07/26 15:22:58  oes
-- Updated to reflect changes in standard.action
-- Added info on where to get updated actions files
-
-Revision 1.61.2.4  2002/07/25 21:42:29  hal9
-Add brief notes on not proxying non-HTTP protocols.
-
-Revision 1.61.2.3  2002/06/09 16:36:33  hal9
-Clarifications on filtering and MIME. Hardcode 'latest release' in index.html.
-
-Revision 1.61.2.2  2002/06/06 02:51:34  hal9
-Fix typo in URL http:/config.privoxy.org
-
-Revision 1.61.2.1  2002/06/05 23:10:43  hal9
-Add new FAQ re: DUN/IE. Change release date from May to June :)
-
-Revision 1.61  2002/05/25 12:37:25  hal9
-Various minor changes and edits.
-
-Revision 1.60  2002/05/22 17:17:48  oes
-Proofread & added more links into u-m
-
-Revision 1.59  2002/05/15 04:03:30  hal9
-Fix ulink -> link markup.
-
-Revision 1.58  2002/05/10 01:48:20  hal9
-This is mostly proposed copyright/licensing additions and changes. Docs
-are still GPL, but licensing and copyright are more visible. Also, copyright
-changed in doc header comments (eliminate references to JB except FAQ).
-
-Revision 1.57  2002/05/05 20:26:02  hal9
-Sorting out license vs copyright in these docs.
-
-Revision 1.56  2002/05/04 08:44:44  swa
-bumped version
-
-Revision 1.55  2002/05/04 00:41:56  hal9
--Remove TOC/first page kludge in favor of proper handling via dsl file.
-
-Revision 1.54  2002/05/03 05:06:44  hal9
-Add brief Q/A on transparent proxies.
-
-Revision 1.53  2002/05/03 01:34:52  hal9
-Fix section numbering for new sections (due to TOC kludge).
-
-Revision 1.52  2002/04/29 03:08:43  hal9
--Added new Q/A on new actions file set up (pointer to u-m)
--Fixed a few broken links and converted old actions as a result of
- recent changes.
-
-Revision 1.51  2002/04/26 17:24:31  swa
-bookmarks cleaned, changed structure of user manual, screen and programlisting cleanups, and numerous other changes that I forgot
-
-Revision 1.50  2002/04/26 05:25:23  hal9
-Mass commit to catch a few scattered fixes.
-
-Revision 1.49  2002/04/12 10:10:18  swa
-version update
-
-Revision 1.48  2002/04/10 18:45:15  swa
-generated
-
-Revision 1.47  2002/04/10 04:05:32  hal9
-More on BML, etc.
-
-Revision 1.45  2002/04/08 22:59:26  hal9
-Version update. Spell chkconfig correctly :)
-
-Revision 1.44  2002/04/07 21:24:29  hal9
-Touch up on name change.
-
-Revision 1.43  2002/04/04 21:59:53  hal9
-Added NT/W2K service/icon situation.
-
-Revision 1.42  2002/04/04 18:46:47  swa
-consistent look. reuse of copyright, history et. al.
-
-Revision 1.41  2002/04/04 06:48:37  hal9
-Structural changes to allow for conditional inclusion/exclusion of content
-based on entity toggles, e.g. 'entity % p-not-stable  "INCLUDE"'. And
-definition of internal entities, e.g. 'entity p-version "2.9.13"' that will
-eventually be set by Makefile.
-More boilerplate text for use across multiple docs.
-
-Revision 1.40  2002/04/03 04:22:03  hal9
-Fixed several typos.
-
-Revision 1.39  2002/04/03 03:53:03  hal9
-Revert some changes, and then make some news, to layout, and appearance.
-
-Revision 1.38  2002/04/02 03:49:10  hal9
-Major changes to doc structure and layout. Sections are not automatically
-numbered now. TOC is on page by itself.
-
-Revision 1.37  2002/04/01 16:24:07  hal9
--Rework of supported Q/A.
--Set up entities to include boilerplate text.
-
-Revision 1.36  2002/03/31 23:18:47  hal9
-More on dealing with BLOCKED.
-
-Revision 1.35  2002/03/30 04:14:19  hal9
-Fix privoxy.org/config links.
-
-Revision 1.34  2002/03/29 04:35:56  hal9
-Touch ups.
-
-Revision 1.33  2002/03/29 01:31:48  hal9
-Several new Q/A's and other touch ups.
-
-Revision 1.32  2002/03/27 00:57:03  hal9
-Touch ups for name change.
-
-Revision 1.31  2002/03/26 22:29:55  swa
-we have a new homepage!
-
-Revision 1.30  2002/03/25 16:39:22  hal9
-A few new sections. Made all links relative to user-manual.
-
-Revision 1.29  2002/03/25 05:23:57  hal9
-Moved section, and touch ups.
-
-Revision 1.28  2002/03/25 04:27:33  hal9
-New section related to name change.
-
-Revision 1.25  2002/03/24 16:08:08  swa
-we are too lazy to make a block-built
-privoxy logo. hence removed the option.
-
-Revision 1.24  2002/03/24 15:46:20  swa
-name change related issue.
-
-Revision 1.23  2002/03/24 12:33:01  swa
-more additions.
-
-Revision 1.22  2002/03/24 11:51:00  swa
-name change. changed filenames.
-
-Revision 1.21  2002/03/24 11:01:06  swa
-name change
-
-Revision 1.20  2002/03/23 15:13:11  swa
-renamed every reference to the old name with foobar.
-fixed "application foobar application" tag, fixed
-"the foobar" with "foobar". left junkbustser in cvs
-comments and remarks to history untouched.
-
-Revision 1.19  2002/03/21 17:01:54  hal9
-Some touch ups.
-
-Revision 1.18  2002/03/18 16:40:31  hal9
-More additions.
-
-Revision 1.17  2002/03/18 03:53:53  hal9
-Some new additions.
-
-Revision 1.16  2002/03/17 21:32:56  hal9
-A few more additions.
-
-Revision 1.15  2002/03/17 07:25:59  hal9
-Correcting some of my typos, and some additions.
-
-Revision 1.14  2002/03/17 02:39:13  hal9
-A little more added ...
-
-Revision 1.13  2002/03/17 00:22:20  hal9
-Adding new stuff, and trying to incorporate stuff from old faq.
-
-Revision 1.12  2002/03/11 20:13:21  swa
-typo
-
-Revision 1.11  2002/03/11 18:42:27  swa
-new section
-
-Revision 1.10  2002/03/11 13:13:27  swa
-correct feedback channels
-
-Revision 1.9  2002/03/10 23:34:04  swa
-more info on not hiding ip address
-
-Revision 1.8  2002/03/09 15:55:48  swa
-added default config section
-
-Revision 1.7  2002/03/07 18:16:55  swa
-looks better
-
-Revision 1.6  2002/03/07 13:16:31  oes
-Committing changes by Stefan
-
-Revision 1.5  2002/03/02 15:50:04  swa
-2.9.11 version. more input for docs.
-
-Revision 1.4  2002/02/24 14:34:24  jongfoster
-Formatting changes.  Now changing the doctype to DocBook XML 4.1
-will work - no other changes are needed.
-
-Revision 1.3  2001/09/23 10:13:48  swa
-upload process established. run make webserver and
-the documentation is moved to the webserver. documents
-are now linked correctly.
-
-Revision 1.2  2001/09/13 15:20:17  swa
-merged standards into developer manual
-
-Revision 1.1  2001/09/12 15:36:41  swa
-source files for junkbuster documentation
-
-Revision 1.3  2001/09/10 17:43:59  swa
-first proposal of a structure.
-
-Revision 1.2  2001/06/13 14:28:31  swa
-docs should have an author.
-
-Revision 1.1  2001/06/13 14:20:37  swa
-first import of project's documentation for the webserver.
-
--->
-
-</article>
diff --git a/external/privoxy/doc/source/history.sgml b/external/privoxy/doc/source/history.sgml
deleted file mode 100644
index 9e8b2fa..0000000
--- a/external/privoxy/doc/source/history.sgml
+++ /dev/null
@@ -1,71 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/history.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: history.sgml,v 2.7 2009/02/22 11:05:21 fabiankeil Exp $
-
-  Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
-  See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  user-manual
-  developer-manual
-  faq
-  webserver/index.sgml
-
--->
-
-<para>
- A long time ago, there was the
- <ulink url="http://www.junkbusters.com/ijb.html";><application>Internet Junkbuster</application></ulink>, 
- by Anonymous Coders and <ulink url="http://www.junkbusters.com/";>Junkbusters
- Corporation</ulink>. This saved many users a lot of pain in the early days of
- web advertising and user tracking.
-</para>
-
-<para>
- But the web, its protocols and standards, and with it, the techniques for
- forcing ads on users, give up autonomy over their browsing, and
- for tracking them, keeps evolving. Unfortunately, the <application>Internet
- Junkbuster</application> did not. Version 2.0.2, published in 1998, was 
- (and is) the last official
- <ulink url="http://www.junkbusters.com/ijbdist.html#release";>release</ulink>
- available from <ulink url="http://www.junkbusters.com";>Junkbusters Corporation</ulink>.
- Fortunately, it had been released under the GNU
- <ulink url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";>GPL</ulink>,
- which allowed further development by others.
-</para>
-
-<para>
- So Stefan Waldherr started maintaining an improved version of the
- software, to which eventually a number of people contributed patches.
- It could already replace banners with a transparent image, and had a first
- version of pop-up killing, but it was still very closely based on the
- original, with all its limitations, such as the lack of HTTP/1.1 support,
- flexible per-site configuration, or content modification. The last release
- from this effort was version 2.0.2-10, published in 2000.
-</para>
-
-<para>
- Then, some
- <ulink url="http://www.privoxy.org/user-manual/copyright.html#AUTHORS";>developers</ulink>
- picked up the thread, and started turning the software inside out, upside down,
- and then reassembled it, adding many
- <ulink url="http://www.privoxy.org/user-manual/introduction.html#FEATURES";>new
- features</ulink> along the way.
-</para>
-
-<para>
- The result of this is <application>Privoxy</application>, whose first
- stable version, 3.0, was released August, 2002. 
- <!-- Cautious!!!!!!!!! ;) -->
-</para>
diff --git a/external/privoxy/doc/source/install.sgml b/external/privoxy/doc/source/install.sgml
deleted file mode 100644
index bba9ccc..0000000
--- a/external/privoxy/doc/source/install.sgml
+++ /dev/null
@@ -1,106 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
-<!entity % dummy "IGNORE"> 
-<!entity buildsource SYSTEM "buildsource.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-stable "INCLUDE">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-alpha "IGNORE">
-<!entity % p-beta "IGNORE">
-<!entity % p-text "INCLUDE">       <!-- define we are a text only doc    -->
-<!entity % p-doc "IGNORE">         <!-- and never a text doc             -->
-<!entity % p-readme "INCLUDE">     <!-- This is now in INSTALL           -->
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/install.sgml,v $
-
- Purpose     :  INSTALL file for Privoxy
-                
- $Id: install.sgml,v 2.11 2009/02/12 16:08:26 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. You have been warned!
- Failure to abide by this rule will result in the revocation of your license 
- to live a peaceful existence!
- ========================================================================
-
- ===================================================================
- READ: Document Note: This file generates the INSTALL file in the top level
- source directory. It is generated as only a plain text file. The current
- markup is not suitable for other formats. Build from Makefile with 'make
- dok-readme'.
- ===================================================================
-
--->
-<article id="index">
-<artheader>
-<![%dummy;[
- <para>
- <comment>
-  This is here to keep vim syntax file from breaking :/
-  If I knew enough to fix it, I would.
-  PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
- </comment>
- </para>
-]]>
-<abstract>
-<para>
- <literal>
-  <msgtext>
-   <literallayout>
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/doc/source/install.sgml,v $
- *
- * Purpose     :  INSTALL file to help with installing from source.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
- *                USA
- *
- *********************************************************************/
-   </literallayout>
-  </msgtext>
- </literal>
-</para>
-
- </abstract>
-</artheader>
-
-<para>
- <msgtext>
-<!--   ~~~~~       New section      ~~~~~     -->
-<!-- include buildsource.sgml boilerplate: -->
- &buildsource;
-<!-- end boilderplate -->
- </msgtext>
-</para>
-
-
-</article>
diff --git a/external/privoxy/doc/source/ldp.dsl.in b/external/privoxy/doc/source/ldp.dsl.in
deleted file mode 100644
index a86de0d..0000000
--- a/external/privoxy/doc/source/ldp.dsl.in
+++ /dev/null
@@ -1,420 +0,0 @@
-<!DOCTYPE style-sheet PUBLIC "-//James Clark//DTD DSSSL Style Sheet//EN" [
-<!ENTITY % html "IGNORE">
-<![%html;[
-<!ENTITY % print "IGNORE">
-<!ENTITY docbook.dsl SYSTEM "@DKPREFIX@/html/docbook.dsl" CDATA dsssl>
-]]>
-<!ENTITY % print "INCLUDE">
-<![%print;[
-<!ENTITY docbook.dsl SYSTEM "@DKPREFIX@/print/docbook.dsl" CDATA dsssl>
-]]>
-]>
-
-<!--
-
-;; borrowed from the LDP stylesheet, with modifications, HB.
-;; Added support for css 03/20/02, and other mods.
-
--->
-
-<style-sheet>
-
-<style-specification id="print" use="docbook">
-<style-specification-body> 
-
-;; ==============================
-;; customize the print stylesheet
-;; ==============================
-;;
-;; see http://docbook.sourceforge.net/projects/dsssl/doc/print.html
-;;
-
-(define %indent-screen-lines%
-  ;; Indent lines in a 'Screen'?
-  #t)
-
-(define %callout-fancy-bug% 
-  ;; Use fancy callout bugs?
-  #t)
-
-(define %chap-app-running-heads% 
-  ;; Generate running headers and footers on chapter-level elements?
-  #t)
-
-(define %chap-app-running-head-autolabel% 
-  ;; Put chapter labels in running heads?
-  #t)
-
-;; this is necessary because right now jadetex does not understand
-;; symbolic entities, whereas things work well with numeric entities.
-(declare-characteristic preserve-sdata?
-  "UNREGISTERED::James Clark//Characteristic::preserve-sdata?"
-  #f)
-
-;; put the legal notice in a separate file
-(define %generate-legalnotice-link%
-  #t)
-
-;; use graphics in admonitions, and have their path be "stylesheet-images"
-;; NO: they do not yet look very good
-(define %admon-graphics-path%
-  "./stylesheet-images/")
-
-(define %admon-graphics%
-  #f)
-
-(define %funcsynopsis-decoration%
-  ;; make funcsynopsis look pretty
-  #t)
-
-;;(define %shade-verbatim%
-;;  #t)
-
-(define %section-autolabel% #t)
-  ;; For enumerated sections (1.1, 1.1.1, 1.2, etc.)
-  
-;; HB changed TOC depth to 3 levels.
-(define (toc-depth nd)
-  3)
-
-;; HB added 03/20/02, see dbparam.dsl ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(define %body-attr% 
-  ;; REFENTRY body-attr
-  ;; PURP What attributes should be hung off of BODY?
-  ;; DESC
-  ;; A list of the the BODY attributes that should be generated.
-  ;; The format is a list of lists, each interior list contains the
-  ;; name and value of a BODY attribute.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  (list
-   (list "BGCOLOR" "#EEEEEE")
-   (list "TEXT" "#000000")
-   (list "LINK" "#0000FF")
-   (list "VLINK" "#840084")
-   (list "ALINK" "#0000FF")))
-
-(define %stylesheet%
-  ;; REFENTRY stylesheet
-  ;; PURP Name of the stylesheet to use
-  ;; DESC
-  ;; The name of the stylesheet to place in the HTML LINK TAG, or '#f' to
-  ;; suppress the stylesheet LINK.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  "../p_doc.css")
-
-(define %stylesheet-type%
-  ;; REFENTRY stylesheet-type
-  ;; PURP The type of the stylesheet to use
-  ;; DESC
-  ;; The type of the stylesheet to place in the HTML LINK TAG.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  "text/css")
-
-(define %css-liststyle-alist%
-  ;; REFENTRY css-liststyle-alist
-  ;; PURP Map DocBook OVERRIDE and MARK attributes to CSS
-  ;; DESC
-  ;; If '%css-decoration%' is turned on then the list-style-type property of
-  ;; list items will be set to reflect the list item style selected in the
-  ;; DocBook instance.  This associative list maps the style type names used
-  ;; in your instance to the appropriate CSS names.  If no mapping exists,
-  ;; the name from the instance will be used.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  '(("bullet" "disc")
-    ("box" "square")))
-
-(define %css-decoration%
-  ;; REFENTRY css-decoration
-  ;; PURP Enable CSS decoration of elements
-  ;; DESC
-  ;; If '%css-decoration%' is turned on then HTML elements produced by the
-  ;; stylesheet may be decorated with STYLE attributes.  For example, the
-  ;; LI tags produced for list items may include a fragment of CSS in the
-  ;; STYLE attribute which sets the CSS property "list-style-type".
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  #t)
-
-;; swa1
-
-(define %generate-part-toc%
-  #f)
-
-(define %generate-article-toc% 
-  ;; Should a Table of Contents be produced for Articles?
-  ;; If true, a Table of Contents will be generated for each 'Article'.
-  #t)
-
-(define %generate-part-toc-on-titlepage%
-  ;; Should the Part TOC appear on the Part title page?
-  #f)
-
-;;Do you want a separate page for the title?
-(define %generate-article-titlepage-on-separate-page%
- #t)
-
-;;Do you want the article toc on the titlepage or separate?
-(define %generate-article-toc-on-titlepage%
- #f)
-
-;;Titlepage Separate?
-;; This is the one that makes TOC only on first page!! hal.
-(define (chunk-skip-first-element-list)
- '())
-
-(define %body-start-indent%
-  ;; Default indent of body text
-  2pi)
-
-(define %para-indent-firstpara%
-  ;; First line start-indent for the first paragraph
-  0pt)
-
-;; swa2
-
-(define %para-indent%
-  ;; First line start-indent for paragraphs (other than the first)
-  0pt)
-
-(define %block-start-indent%
-  ;; Extra start-indent for block-elements
-  2pt)
-
-;;Define distance between paragraphs
-(define %para-sep% 
- (/ %bf-size% 2.0))
-
-;; with swa2 no effects
-
-;; swa3
-
-;;Define distance between block elements (figures, tables, etc.).
-(define %block-sep% 
- (* %para-sep% 1.0))
-;; (* %para-sep% 2.0))
-
-(define %hyphenation%
-  ;; Allow automatic hyphenation?
-  #t)
-
-(define %left-margin% 5pi)
-(define %right-margin% 5pi)
-(define %top-margin% 5pi)
-(define %bottom-margin% 5pi)
-(define %footer-margin% 2pi)
-(define %header-margin% 2pi)
-
-(define %line-spacing-factor% 1.3)
-  ;; Factor used to calculate leading
-  ;; The leading is calculated by multiplying the current font size by the 
-  ;; '%line-spacing-factor%'. For example, if the font size is 10pt and
-  ;; the '%line-spacing-factor%' is 1.1, then the text will be
-  ;; printed "10-on-11".
-
-(define %head-before-factor% 
-  ;; Factor used to calculate space above a title
-  ;; The space before a title is calculated by multiplying the font size
-  ;; used in the title by the '%head-before-factor%'.
-;;  0.75)
-  0.5)
-
-(define %head-after-factor% 
-  ;; Factor used to calculate space below a title
-  ;; The space after a title is calculated by multiplying the font size used
-  ;; in the title by the '%head-after-factor%'.
-  0.5)
-
-(define %input-whitespace-treatment% 'collapse)
-
-(define ($generate-article-lot-list$)
-  ;; Which Lists of Titles should be produced for Articles?
-  (list ))
-
-
-</style-specification-body>
-</style-specification>
-
-
-<!--
-;; ===================================================
-;; customize the html stylesheet; borrowed from Cygnus
-;; at http://sourceware.cygnus.com/ (cygnus-both.dsl)
-;; ===================================================
--->
-
-<style-specification id="html" use="docbook">
-<style-specification-body> 
-
-;; this is necessary because right now jadetex does not understand
-;; symbolic entities, whereas things work well with numeric entities.
-(declare-characteristic preserve-sdata?
-  "UNREGISTERED::James Clark//Characteristic::preserve-sdata?"
-  #f)
-
-;; put the legal notice in a separate file
-(define %generate-legalnotice-link%
-  #t)
-
-;; use graphics in admonitions, and have their path be "stylesheet-images"
-;; NO: they do not yet look very good
-(define %admon-graphics-path%
-  "./stylesheet-images/")
-
-(define %admon-graphics%
-  #f)
-
-(define %funcsynopsis-decoration%
-  ;; make funcsynopsis look pretty
-  #t)
-
-(define %html-ext%
-  ".html")
-
-(define %generate-article-toc% 
-  ;; Should a Table of Contents be produced for Articles?
-  ;; If true, a Table of Contents will be generated for each 'Article'.
-  #t)
-
-;; HB added next three statements 05/03/02.
-;;Do you want a separate page for the title?
-(define %generate-article-titlepage-on-separate-page%
- #t)
-
-;;Do you want the article toc on the titlepage or separate?
-(define %generate-article-toc-on-titlepage%
- #t)
-
-;;Titlepage Separate?
-;; This is the one that makes TOC only on first page!! hal.
-(define (chunk-skip-first-element-list)
- '())
-
-(define %root-filename%
-  ;; The filename of the root HTML document (e.g, "index").
-  "index")
-
-(define %generate-part-toc%
-  #t)
-
-(define %shade-verbatim%
-  #t)
-
-(define %use-id-as-filename%
-  ;; Use ID attributes as name for component HTML files?
-  #t)
-
-(define %graphic-default-extension% 
-  "gif")
-
-(define %section-autolabel% #t)
-  ;; For enumerated sections (1.1, 1.1.1, 1.2, etc.)
-  
-;; HB changed TOC depth to 3 levels.
-(define (toc-depth nd)
-  3)
-
-;; HB added 03/20/02, see dbparam.dsl ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-(define %body-attr% 
-  ;; REFENTRY body-attr
-  ;; PURP What attributes should be hung off of BODY?
-  ;; DESC
-  ;; A list of the the BODY attributes that should be generated.
-  ;; The format is a list of lists, each interior list contains the
-  ;; name and value of a BODY attribute.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  (list
-   (list "BGCOLOR" "#EEEEEE")
-   (list "TEXT" "#000000")
-   (list "LINK" "#0000FF")
-   (list "VLINK" "#840084")
-   (list "ALINK" "#0000FF")))
-
-(define %stylesheet%
-  ;; REFENTRY stylesheet
-  ;; PURP Name of the stylesheet to use
-  ;; DESC
-  ;; The name of the stylesheet to place in the HTML LINK TAG, or '#f' to
-  ;; suppress the stylesheet LINK.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  "../p_doc.css")
-
-(define %stylesheet-type%
-  ;; REFENTRY stylesheet-type
-  ;; PURP The type of the stylesheet to use
-  ;; DESC
-  ;; The type of the stylesheet to place in the HTML LINK TAG.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  "text/css")
-
-(define %css-liststyle-alist%
-  ;; REFENTRY css-liststyle-alist
-  ;; PURP Map DocBook OVERRIDE and MARK attributes to CSS
-  ;; DESC
-  ;; If '%css-decoration%' is turned on then the list-style-type property of
-  ;; list items will be set to reflect the list item style selected in the
-  ;; DocBook instance.  This associative list maps the style type names used
-  ;; in your instance to the appropriate CSS names.  If no mapping exists,
-  ;; the name from the instance will be used.
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  '(("bullet" "disc")
-    ("box" "square")))
-
-(define %css-decoration%
-  ;; REFENTRY css-decoration
-  ;; PURP Enable CSS decoration of elements
-  ;; DESC
-  ;; If '%css-decoration%' is turned on then HTML elements produced by the
-  ;; stylesheet may be decorated with STYLE attributes.  For example, the
-  ;; LI tags produced for list items may include a fragment of CSS in the
-  ;; STYLE attribute which sets the CSS property "list-style-type".
-  ;; /DESC
-  ;; AUTHOR N/A
-  ;; /REFENTRY
-  #t)
-
-;; HB added 2008-01-19
-(define %html-header-tags% 
-  '(("META" ("HTTP-EQUIV" "Content-Type") ("CONTENT" "text/html;
-charset=ISO-8859-1"))))
-
-</style-specification-body>
-</style-specification>
-
-
-<style-specification id="html-notoc" use="html">
-<style-specification-body> 
-
-;; ===================================================
-;; Vairant without TOC for the Homepage --oes 24/05/02
-;; ===================================================
-
-(define %generate-article-toc% 
-  ;; Should a Table of Contents be produced for Articles?
-  ;; If true, a Table of Contents will be generated for each 'Article'.
-  #f)
-
-</style-specification-body>
-</style-specification>
-
-<external-specification id="docbook" document="docbook.dsl">
-
-</style-sheet>
diff --git a/external/privoxy/doc/source/license.sgml b/external/privoxy/doc/source/license.sgml
deleted file mode 100644
index b674770..0000000
--- a/external/privoxy/doc/source/license.sgml
+++ /dev/null
@@ -1,50 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/license.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: license.sgml,v 2.6 2008/05/23 15:09:48 fabiankeil Exp $
-
-  Copyright (C) 2001-2008 Privoxy Developers http://www.privoxy.org/
-  See LICENSE.
- 
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  privoxy-man-page
-  user-manual
-  developer-manual
-  faq
-  webserver/index.sgml
-
--->
-
-<para>
- <application>Privoxy</application> is free software; you can
- redistribute it and/or modify it under the terms of the 
- <citetitle>GNU General Public License</citetitle>, version 2,
- as published by the Free Software Foundation.
-</para>
-
-<para>
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the <ulink
- url="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";>
- <citetitle>GNU General Public License</citetitle></ulink> for details.
-</para>
-
-<para>
- You should have received a copy of the <citetitle>GNU GPL</citetitle>
- along with this program; if not, write to the <address> Free Software
- Foundation, Inc. <street>51 Franklin Street, Fifth Floor</street>
- <city>Boston</city>, <state>MA</state> <postcode>02110-1301</postcode>
- <country>USA</country> </address>
-</para>
-
diff --git a/external/privoxy/doc/source/newfeatures.sgml b/external/privoxy/doc/source/newfeatures.sgml
deleted file mode 100644
index b1db531..0000000
--- a/external/privoxy/doc/source/newfeatures.sgml
+++ /dev/null
@@ -1,156 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/newfeatures.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: newfeatures.sgml,v 2.10 2009/02/14 17:37:13 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  user-manual
-  faq
-
--->
-<para>
- <itemizedlist>
-
-<!--
- <listitem>
-  <para>
-  FIXME: complete the list of features. change the order: most important
-  features to the top of the list. prefix new features with "NEW".
-  </para>
- </listitem> 
--->
- <listitem>
-  <para>
-     Can keep outgoing connections alive and reuse them later on.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-     Supports tagging which allows to change the behaviour
-     based on client and server headers.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-     Can be run as an "intercepting" proxy, which obviates the need to
-     configure browsers individually.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-     Sophisticated actions and filters for manipulating both server and client
-     headers. 
-   </para>
- </listitem> 
-
- <listitem>
-  <para>
-     Can be chained with other proxies.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Integrated browser based configuration and control utility at <ulink
-   url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>
-   (shortcut: <ulink url="http://p.p/";>http://p.p/</ulink>). Browser-based
-   tracing of rule and filter effects. Remote toggling.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Web page filtering (text replacements, removes banners based on size,
-   invisible <quote>web-bugs</quote>, JavaScript and HTML annoyances, 
-   pop-up windows, etc.)
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Modularized configuration that allows for standard settings and
-   user settings to reside in separate files, so that installing updated
-   actions files won't overwrite individual user settings.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Support for Perl Compatible Regular Expressions in the configuration files, and 
-   a more sophisticated and flexible configuration syntax.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Improved cookie management features (e.g. session based cookies).
-  </para>
-</listitem> 
-
- <listitem>
-  <para>
-   GIF de-animation. 
-  </para>
- </listitem> 
- 
- <listitem>
-  <para>
-   Bypass many click-tracking scripts (avoids script redirection).
-  </para>
- </listitem> 
- 
- <listitem>
-  <para>
-   Multi-threaded (POSIX and native threads).
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   User-customizable HTML templates for most proxy-generated pages (e.g. "blocked" page).
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Auto-detection and re-reading of config file changes.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Improved signal handling, and a true daemon mode (Unix).
-  </para>
-</listitem> 
-
- <listitem>
-  <para>
-   Every feature now controllable on a per-site or per-location basis, configuration
-   more powerful and versatile over-all.
-  </para>
-</listitem> 
-
- <listitem>
-  <para>
-   Many smaller new features added, limitations and bugs removed.
-  </para>
-</listitem> 
-
- </itemizedlist>
-</para>
diff --git a/external/privoxy/doc/source/p-authors.sgml b/external/privoxy/doc/source/p-authors.sgml
deleted file mode 100644
index b8eb1ca..0000000
--- a/external/privoxy/doc/source/p-authors.sgml
+++ /dev/null
@@ -1,159 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/p-authors.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: p-authors.sgml,v 2.34 2009/02/08 18:13:26 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  privoxy-man-page
-  AUTHORS
-  user-manual
-
--->
-<![%p-authors-formal;[
-<para>
-Current Privoxy Team:
-</para>
-]]>
-
-<literallayout>
- Fabian Keil, lead developer
- David Schmidt, developer
-<![%p-authors-formal;[
-]]>
-
- Hal Burgiss
- Mark Miller
- Gerry Murphy
- Lee Rian
- Roland Rosenfeld
- Jörg Strohmayer
-<![%p-authors-formal;[
-</literallayout>
-
-<para>
- Former Privoxy Team Members:
-</para>
-
-<literallayout>
- Johny Agotnes
- Rodrigo Barbosa
- Moritz Barsnick
- Ian Cummings
- Brian Dessent
- Jon Foster
- Karsten Hopp
- Alexander Lazic
- Daniel Leite
- Gábor Lipták
- Adam Lock
- Guy Laroche
- Justin McMurtry
- Andreas Oesterhelt
- Haroon Rafique
- Georg Sauthoff
- Thomas Steudten
- Rodney Stromlund
- Sviatoslav Sviridov
- Sarantis Paskalis
- Stefan Waldherr
-]]>
-</literallayout>
-<![%p-authors-formal;[
-<para>
- Thanks to the many people who have tested Privoxy, reported bugs, provided
- patches, made suggestions or contributed in some way. These include (in
- alphabetical order):
-</para>
-<literallayout>
- Ken Arromdee
- Devin Bayer
- Gergely Bor
- Reiner Buehl
- Andrew J. Caines
- Clifford Caoile
- Frédéric Crozat
- Michael T. Davis
- Mattes Dolak
- Matthias Drochner
- Peter E.
- Florian Effenberger
- Markus Elfring
- Dean Gaudet
- Stephen Gildea
- Daniel Griscom
- Felix Gröbert
- Aaron Hamid
- Darel Henman
- Magnus Holmgren
- Eric M. Hopper
- Ralf Horstmann
- Stefan Huehner
- Peter Hyman
- Derek Jennings
- Petr Kadlec
- David Laight
- Bert van Leeuwen
- Don Libes
- Paul Lieverse
- Toby Lyward
- Wil Mahan
- Jindrich Makovicka
- David Mediavilla
- Raphael Moll
- Amuro Namie
- Adam Piggott
- Dan Price
- Roberto Ragusa
- Félix Rauch
- Maynard Riley
- Chung-chieh Shan
- Spinor S.
- Bart Schelstraete
- Oliver Stoeneberg
- Peter Thoenen
- Martin Thomas
- Bobby G. Vinyard
- Jochen Voss
- Glenn Washburn
- Song Weijia
- Jörg Weinmann
- Darren Wiebe
- Anduin Withers
- Oliver Yeoh
- Jamie Zawinski
-</literallayout>
-
-<para>
- Privoxy is based in part on code originally developed by
- Junkbusters Corp. and Anonymous Coders.
-</para>
-
-<para>
- Privoxy heavily relies on Philip Hazel's PCRE.
-</para>
-
-<para>
- The code to filter compressed content makes use of zlib
- which is written by Jean-loup Gailly and Mark Adler.
-</para>
-
-<para>
- On systems that lack snprintf(), Privoxy is using a version
- written by Mark Martinec. On systems that lack strptime(),
- Privoxy is using the one from the GNU C Library written
- by Ulrich Drepper.
-</para>
-]]>
diff --git a/external/privoxy/doc/source/p-config.sgml b/external/privoxy/doc/source/p-config.sgml
deleted file mode 100644
index 3b59fbf..0000000
--- a/external/privoxy/doc/source/p-config.sgml
+++ /dev/null
@@ -1,2756 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/p-config.sgml,v $
-
- Purpose     :  Used with other docs and files only.
-
- $Id: p-config.sgml,v 2.41 2009/02/19 16:59:41 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation.
- ========================================================================
-
- 
- This file contains all the config file comments and options. It used to 
- build both the user-manual config sections, and all of config (yes, the main
- config file) itself.
-
- Rationale: This is broken up into two files since a file with a prolog 
- (DTD, etc) cannot be sourced as a secondary file. config.sgml is basically
- a wrapper for this file.
-
- IMPORTANT:
-
- OPTIONS: The actual options are included in this file and prefixed with 
- '@@', and processed by the Makefile to strip the '@@'. Default options 
- that should appear commented out should be listed as: '@@#OPTION'. 
- Otherwise, as '@@OPTION'. Example:
-
-  @@listen-address  127.0.0.1:8118
-
- The Makefile does significant other processing too. The final results 
- should be checked to make sure that the perl processing does not 
- fubar something!!! Makefile processing requires w3m, fmt (shell line
- formatter), and perl.
- 
-
- This file is included into:
-
-   user-manual.sgml
-   config   (the actual Privoxy config file)
-
--->
-
-<![%user-man;[
-<!-- This part only goes into user-manual -->
-<sect1 id="config">
-<title>The Main Configuration File</title>
-
-<para>
- Again, the main configuration file is named <filename>config</filename> on
- Linux/Unix/BSD and OS/2, and <filename>config.txt</filename> on Windows.
- Configuration lines consist of an initial keyword followed by a list of
- values, all separated by whitespace (any number of spaces or tabs). For
- example:
-</para>
-
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>confdir /etc/privoxy</emphasis></literallayout>
-  </msgtext>
- </literal> 
-</para>
-
-<para>
- Assigns the value <literal>/etc/privoxy</literal> to the option
- <literal>confdir</literal> and thus indicates that the configuration
- directory is named <quote>/etc/privoxy/</quote>.
-</para>
-
-<para>
- All options in the config file except for <literal>confdir</literal> and
- <literal>logdir</literal> are optional. Watch out in the below description
- for what happens if you leave them unset.
-</para>
-
-<para>
- The main config file controls all aspects of <application>Privoxy</application>'s
- operation that are not location dependent (i.e. they apply universally, no matter
- where you may be surfing).
-</para>
-
-]]>
-
-
-<![%config-file;[
-<!-- This part only goes into the config file -->
-<sect1 id="config">
-<title>
- @@TITLE<!-- between the @@ is stripped by Makefile -->@@
- Sample Configuration File for Privoxy v&p-version;
-</title>
-<para>
- $Id: p-config.sgml,v 2.41 2009/02/19 16:59:41 fabiankeil Exp $
-</para>
-<para>
-Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
-</para>
-
-<para>
- <literallayout>
-#################################################################
-                                                                #
-                    Table of Contents                           #
-                                                                #
-      I. INTRODUCTION                                           #
-     II. FORMAT OF THE CONFIGURATION FILE                       #
-                                                                #
-      1. LOCAL SET-UP DOCUMENTATION                             #
-      2. CONFIGURATION AND LOG FILE LOCATIONS                   #
-      3. DEBUGGING                                              #
-      4. ACCESS CONTROL AND SECURITY                            #
-      5. FORWARDING                                             #
-      6. WINDOWS GUI OPTIONS                                    #
-                                                                #
-#################################################################
- </literallayout>
-</para>
-
-<literallayout>I. INTRODUCTION
- ===============  <!-- fuck this madness --></literallayout>
-
-<para>
- This file holds Privoxy's main configuration.  Privoxy detects
- configuration changes automatically, so you don't have to restart it
- unless you want to load a different configuration file.
-</para>
-<para>
- The configuration will be reloaded with the first request after the
- change was done, this request itself will still use the old configuration,
- though. In other words: it takes two requests before you see the result of
- your changes. Requests that are dropped due to ACL don't trigger reloads.
-</para>
-<para>
- When starting Privoxy on Unix systems, give the location of this
- file as last argument.  On Windows systems, Privoxy will look for
- this file with the name 'config.txt' in the current working directory
- of the Privoxy process.
-</para>
-
-<para>
- <literallayout><!-- funky spacing -->
-
-II. FORMAT OF THE CONFIGURATION FILE
-====================================</literallayout>
-</para>
-<para>
- Configuration lines consist of an initial keyword followed by a list
- of values, all separated by whitespace (any number of spaces or
- tabs).  For example,
-</para>
-<para>
- actionsfile default.action
-</para>
-<para>
- Indicates that the actionsfile is named 'default.action'.
-</para>
-<para>
- The '#' indicates a comment.  Any part of a line following a '#' is
- ignored, except if the '#' is preceded by a '\'.
-</para>
-<para>
- Thus, by placing a # at the start of an existing configuration line,
- you can make it a comment and it will be treated as if it weren't there. 
- This is called "commenting out" an option and can be useful. Removing
- the # again is called "uncommenting".
-</para>
-<para>
- Note that commenting out an option and leaving it at its default
- are two completely different things! Most options behave very
- differently when unset. See the "Effect if unset" explanation
- in each option's description for details.
-</para>
-<para>
- Long lines can be continued on the next line by using a `\' as
- the last character.
-</para>
-
-]]>
-
-<!-- ************************************************ -->
-<!-- The following is common to both outputs (mostly) -->
-<!-- ************************************************ -->
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="local-set-up">
-<title>Local Set-up Documentation</title>
-
-  <para>
-    If you intend to operate <application>Privoxy</application> for more users
-    than just yourself, it might be a good idea to let them know how to reach
-    you, what you block and why you do that, your policies, etc.
-   </para>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="user-manual"><title>user-manual</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Location of the <application>Privoxy</application> User Manual.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>A fully qualified URI</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    <ulink url="http://www.privoxy.org/user-manual/";>http://www.privoxy.org/<replaceable class="parameter">version</replaceable>/user-manual/</ulink>
-    will be used, where <replaceable class="parameter">version</replaceable> is the <application>Privoxy</application> version.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-    <para>
-    The User Manual URI is the single best source of information on 
-    <application>Privoxy</application>, and is used for help links from some
-    of the internal CGI pages. The manual itself is normally packaged with the
-    binary distributions, so you probably want to set this to a locally
-    installed copy. 
-   </para>
-   <para>
-    Examples:
-   </para>
-  <!--
-  <para>
-   Unix, in local filesystem (may not work with all browsers):
-  </para>
-  <para>
-   <screen>&nbsp;&nbsp;user-manual&nbsp;&nbsp;file:///usr/share/doc/privoxy-&p-version;/user-manual/</screen>
-  </para>
-  <para>
-   Windows, in local filesystem, <emphasis>must</emphasis> use forward slash notation:
-  </para>
-  <para>
-   <screen>&nbsp;&nbsp;user-manual&nbsp;&nbsp;file:/c:/some-dir/privoxy-&p-version;/user-manual/</screen>
-  </para>
-  <para>
-   Windows, UNC notation (with forward slashes):
-  </para>
-  <para>
-   <screen>&nbsp;&nbsp;user-manual&nbsp;&nbsp;file://///some-server/some-path/privoxy-&p-version;/user-manual/</screen>
-  </para>
- --> 
-  <para>
-   The best all purpose solution is simply to put the full local
-   <literal>PATH</literal> to where the <citetitle>User Manual</citetitle> is
-   located:
-  </para>
-  <para>
-   <screen>&nbsp;&nbsp;user-manual&nbsp;&nbsp;/usr/share/doc/privoxy/user-manual</screen>
-  </para>
-  <para>
-   The User Manual is then available to anyone with access to
-   <application>Privoxy</application>, by following the built-in URL:
-   <literal>http://config.privoxy.org/user-manual/</literal>
-   (or the shortcut: <literal>http://p.p/user-manual/</literal>).
-  </para>
-  <para>
-   If the documentation is not on the local system, it can be accessed 
-   from a remote server, as:
-  </para>
-  <para>
-   <screen>&nbsp;&nbsp;user-manual&nbsp;&nbsp;http://example.com/privoxy/user-manual/</screen>
-  </para>
-  <![%user-man;[
-   <!-- this gets hammered in conversion to config. Text repeated below. -->
-  <warning>
-   <para>
-     If set, this option should be <emphasis>the first option in the config
-     file</emphasis>, because it is used while the config file is being read
-     on start-up.
-   </para>
-  </warning>     
-  ]]>
-
-  <![%config-file;[
-   <!-- alternate -->
-   <para>
-    WARNING!!!
-   </para>
-   <blockquote>
-    <para> 
-     If set, this option should be the first option in the config
-     file, because it is used while the config file is being read.
-    </para>
-   </blockquote>
-  ]]>
-
- </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#user-manual http://www.privoxy.org/user-manual/</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="trust-info-url"><title>trust-info-url</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    A URL to be displayed in the error page that users will see if access to an untrusted page is denied.    
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>URL</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    No links are displayed on the "untrusted" error page.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The value of this option only matters if the experimental trust mechanism has been
-    activated. (See <link linkend="trustfile"><emphasis>trustfile</emphasis></link> below.)
-   </para>
-   <para>
-    If you use the trust mechanism, it is a good idea to write up some on-line
-    documentation about your trust policy and to specify the URL(s) here.
-    Use multiple times for multiple URLs.
-   </para>
-   <para>
-    The URL(s) should be added to the trustfile as well, so users don't end up
-    locked out from the information on why they were locked out in the first place!
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#trust-info-url  http://www.example.com/why_we_block.html</literallayout>]]>
-<![%config-file;[<literallayout>@@#trust-info-url  http://www.example.com/what_we_allow.html</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="admin-address"><title>admin-address</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    An email address to reach the <application>Privoxy</application> administrator.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Email address</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    No email address is displayed on error pages and the CGI user interface.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    If both <literal>admin-address</literal> and <literal>proxy-info-url</literal>
-    are unset, the whole "Local Privoxy Support" box on all generated pages will
-    not be shown.
-   </para>  
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#admin-address privoxy-admin@xxxxxxxxxxx</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="proxy-info-url"><title>proxy-info-url</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    A URL to documentation about the local <application>Privoxy</application> setup,
-    configuration or policies.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>URL</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    No link to local documentation is displayed on error pages and the CGI user interface.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    If both <literal>admin-address</literal> and <literal>proxy-info-url</literal>
-    are unset, the whole "Local Privoxy Support" box on all generated pages will
-    not be shown.
-   </para>  
-   <para>
-    This URL shouldn't be blocked ;-)
-   </para> 
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#proxy-info-url http://www.example.com/proxy-service.html</literallayout>]]>
-</sect3>
-
-</sect2>
-<!--  ~  End section  ~  -->
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="conf-log-loc">
-<title>Configuration and Log File Locations</title>
-
-<para>
- <application>Privoxy</application> can (and normally does) use a number of
- other files for additional configuration, help and logging.
- This section of the configuration file tells <application>Privoxy</application>
- where to find those other files. 
-</para>
-
-<para>
- The user running <application>Privoxy</application>, must have read
- permission for all configuration files, and write permission to any files
- that would be modified, such as log files and actions files.
-</para>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="confdir"><title>confdir</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>The directory where the other configuration files are located.</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Path name</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>/etc/privoxy (Unix) <emphasis>or</emphasis> <application>Privoxy</application> installation dir (Windows) </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para><emphasis>Mandatory</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    No trailing <quote><literal>/</literal></quote>, please.
-   </para>
-  <!-- 
-   This is really outdated and not likely to happen. HB 09/20/06
-   <para>
-    When development goes modular and multi-user, the blocker, filter, and
-    per-user config will be stored in subdirectories of <quote>confdir</quote>.
-    For now, the configuration directory structure is flat, except for 
-    <filename>confdir/templates</filename>, where the HTML templates for CGI 
-    output reside (e.g. <application>Privoxy's</application> 404 error page). 
-   </para>
-  --> 
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@confdir .</literallayout>]]>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="templdir"><title>templdir</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>An alternative directory where the templates are loaded from.</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Path name</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>unset</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>The templates are assumed to be located in confdir/template.</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    <application>Privoxy's</application> original templates are usually
-    overwritten with each update. Use this option to relocate customized
-    templates that should be kept. As template variables might change
-    between updates, you shouldn't expect templates to work with
-    <application>Privoxy</application> releases other than the one
-    they were part of, though.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#templdir .</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="logdir"><title>logdir</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The directory where all logging takes place
-    (i.e. where the <filename>logfile</filename> is located).
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Path name</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>/var/log/privoxy (Unix) <emphasis>or</emphasis> <application>Privoxy</application> installation dir (Windows) </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para><emphasis>Mandatory</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    No trailing <quote><literal>/</literal></quote>, please.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@logdir .</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="actionsfile"><title>
-actionsfile
-</title>
-<anchor id="default.action">
-<anchor id="standard.action">
-<anchor id="user.action">
-<!-- Note: slightly modified this section 04/28/02, hal. See NOTE. -->
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The <link linkend="actions-file">actions file(s)</link> to use
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Complete file name, relative to <literal>confdir</literal></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default values:</term>
-  <listitem>
-   <simplelist>
-    <member>
-     <msgtext><literallayout>  match-all.action # Actions that are applied to all sites and maybe overruled later on.</literallayout></msgtext>
-    </member>
-    <member>
-     <msgtext><literallayout>  default.action   # Main actions file</literallayout></msgtext>
-    </member>
-    <member>
-     <msgtext><literallayout>  user.action      # User customizations</literallayout></msgtext>
-    </member>
-   </simplelist>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    No actions are taken at all. More or less neutral proxying. 
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Multiple <literal>actionsfile</literal> lines are permitted, and are in fact recommended!
-   </para>
-   <para> 
-    The default values are <filename>default.action</filename>, which is the
-    <quote>main</quote> actions file maintained by the developers, and
-    <filename>user.action</filename>, where you can make your personal additions.
-   </para>
-   <para> 
-    Actions files contain all the per site and per URL configuration for 
-    ad blocking, cookie management, privacy considerations, etc.
-    There is no point in using <application>Privoxy</application> without at 
-    least one actions file.
-   </para>
-   <para>
-    Note that since Privoxy 3.0.7, the complete filename, including the <quote>.action</quote>
-    extension has to be specified.  The syntax change was necessary to be consistent
-    with the other file options and to allow previously forbidden characters.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<!-- NOTE: alternate markup to make a simpler list doesn't work due to -->
-<!-- html -> text conversion, blah -->
-<![%config-file;[<literallayout>@@actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.</literallayout>]]>
-<![%config-file;[<literallayout>@@actionsfile default.action   # Main actions file</literallayout>]]>
-<!--
- XXX: Like user.filter, user.action should probably be commented out
- by default as not all packages install it into the default directory.
- fk 2007-11-07
--->
-<![%config-file;[<literallayout>@@actionsfile user.action      # User customizations</literallayout>]]>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="filterfile"><title>filterfile</title>
-<anchor id="default.filter">
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The <link linkend="filter-file">filter file(s)</link> to use
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>File name, relative to <literal>confdir</literal></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>default.filter (Unix) <emphasis>or</emphasis> default.filter.txt (Windows)</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    No textual content filtering takes place, i.e. all
-    <literal>+<link linkend="filter">filter</link>{<replaceable class="parameter">name</replaceable>}</literal>
-    actions in the actions files are turned neutral.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Multiple <literal>filterfile</literal> lines are permitted.
-   </para>
-   <para>
-    The <link linkend="filter-file">filter files</link> contain content modification
-    rules that use <link linkend="regex">regular expressions</link>. These rules permit
-    powerful changes on the content of Web pages, and optionally the headers
-    as well, e.g., you could try to disable your favorite JavaScript annoyances,
-    re-write the actual displayed text, or just have some fun 
-    playing buzzword bingo with web pages.
-   </para>
-   <para>
-    The
-    <literal>+<link linkend="filter">filter</link>{<replaceable class="parameter">name</replaceable>}</literal>
-    actions rely on the relevant filter (<replaceable class="parameter">name</replaceable>)
-    to be defined in a filter file!
-   </para>
-   <para>
-    A pre-defined filter file called <filename>default.filter</filename> that contains
-    a number of useful filters for common problems is included in the distribution.
-    See the section on the <literal><link linkend="filter">filter</link></literal>
-    action for a list.
-   </para>
-   <para>
-    It is recommended to place any locally adapted filters into a separate
-    file, such as <filename>user.filter</filename>.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@filterfile default.filter</literallayout>]]>
-<![%config-file;[<literallayout>@@#filterfile user.filter      # User customizations</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="logfile"><title>logfile</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The log file to use
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>File name, relative to <literal>logdir</literal></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset (commented out)</emphasis>. When activated: logfile (Unix) <emphasis>or</emphasis> privoxy.log (Windows).</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    No logfile is written.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The logfile is where all logging and error messages are written. The level
-    of detail and number of messages are set with the <literal>debug</literal>
-    option (see below). The logfile can be useful for tracking down a problem with
-    <application>Privoxy</application> (e.g., it's not blocking an ad you
-    think it should block) and it can help you to monitor what your browser
-    is doing.
-   </para>
-   <para>
-    Depending on the debug options below, the logfile may be a privacy risk
-    if third parties can get access to it. As most users will never look
-    at it, <application>Privoxy</application> 3.0.7 and later only log fatal
-    errors by default.
-   </para>
-   <para>
-    For most troubleshooting purposes, you will have to change that,
-    please refer to the debugging section for details.
-   </para>
-   <para>
-    Your logfile will grow indefinitely, and you will probably want to
-    periodically remove it.  On Unix systems, you can do this with a cron job
-    (see <quote>man cron</quote>). For Red Hat based Linux distributions, a
-    <command>logrotate</command> script has been included.
-   </para> 
-   <para>
-    Any log files must be writable by whatever user <application>Privoxy</application>
-    is being run as (on Unix, default user id is <quote>privoxy</quote>).
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@logfile logfile</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="trustfile"><title>trustfile</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The name of the trust file to use
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>File name, relative to <literal>confdir</literal></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset (commented out)</emphasis>. When activated: trust (Unix) <emphasis>or</emphasis> trust.txt (Windows)</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    The entire trust mechanism is disabled.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The trust mechanism is an experimental feature for building white-lists and should
-    be used with care. It is <emphasis>NOT</emphasis> recommended for the casual user.
-   </para>
-   <para>
-    If you specify a trust file, <application>Privoxy</application> will only allow
-    access to sites that are specified in the trustfile. Sites can be listed 
-    in one of two ways:
-   </para>
-   <para>
-    Prepending a <literal>~</literal> character limits access to this site 
-    only (and any sub-paths within this site), e.g. 
-    <literal>~www.example.com</literal> allows access to
-    <literal>~www.example.com/features/news.html</literal>, etc. 
-   </para>
-   <para>
-    Or, you can designate sites as <emphasis>trusted referrers</emphasis>, by
-    prepending the name with a <literal>+</literal> character. The effect is that
-    access to untrusted sites will be granted -- but only if a link from this
-    trusted referrer was used to get there. The link target will then be added
-    to the <quote>trustfile</quote> so that future, direct accesses will be
-    granted. Sites added via this mechanism do not become trusted referrers
-    themselves (i.e. they are added with a <literal>~</literal> designation).
-    There is a limit of 512 such entries, after which new entries will not be
-    made.
-   </para>
-   <para>
-    If you use the <literal>+</literal> operator in the trust file, it may grow 
-    considerably over time.
-   </para>
-   <para>
-    It is recommended that <application>Privoxy</application> be compiled with
-    the <literal>--disable-force</literal>, <literal>--disable-toggle</literal> and
-    <literal> --disable-editor</literal> options, if this feature is to be
-    used.
-   </para>
-   <para>
-    Possible applications include limiting Internet access for children.
-   </para>
-   
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#trustfile trust</literallayout>]]>
-</sect3>
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="debugging">
-<title>Debugging</title>
-
- <para>
-  These options are mainly useful when tracing a problem.
-  Note that you might also want to invoke
-  <application>Privoxy</application> with the <literal>--no-daemon</literal>
-  command line option when debugging.
- </para>
-
-<sect3 renderas="sect4" id="debug"><title>debug</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Key values that determine what information gets logged.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Integer values</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Default value is used (see above).
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The available debug levels are:
-   </para>
-   <para>
-    <programlisting>
-  debug     1 # Log the destination for each request &my-app; let through. See also debug 1024.
-  debug     2 # show each connection status
-  debug     4 # show I/O status
-  debug     8 # show header parsing
-  debug    16 # log all data written to the network into the logfile
-  debug    32 # debug force feature
-  debug    64 # debug regular expression filters
-  debug   128 # debug redirects
-  debug   256 # debug GIF de-animation
-  debug   512 # Common Log Format
-  debug  1024 # Log the destination for requests &my-app; didn't let through, and the reason why.
-  debug  2048 # CGI user interface
-  debug  4096 # Startup banner and warnings.
-  debug  8192 # Non-fatal errors
-</programlisting>
-   </para>
-   <para>
-    To select multiple debug levels, you can either add them or use
-    multiple <literal>debug</literal> lines.
-   </para>
-   <para>
-    A debug level of 1 is informative because it will show you each request
-    as it happens. <emphasis>1, 4096 and 8192 are recommended</emphasis>
-    so that you will notice when things go wrong. The other levels are
-    probably only of interest if you are hunting down a specific problem.
-    They can produce a hell of an output (especially 16).
-    <!-- LOL -->
-   </para>
-   <para>
-    &my-app; used to ship with the debug levels recommended above enabled by
-    default, but due to privacy concerns 3.0.7 and later are configured to
-    only log fatal errors.
-   </para>
-   <para>
-    If you are used to the more verbose settings, simply enable the debug lines
-    below again.
-   </para>
-   <para>
-    If you want to use pure CLF (Common Log Format), you should set <quote>debug
-    512</quote> <emphasis>ONLY</emphasis> and not enable anything else.
-   </para>
-   <para>
-    <application>Privoxy</application> has a hard-coded limit for the
-    length of log messages. If it's reached, messages are logged truncated
-    and marked with <quote>... [too long, truncated]</quote>.
-   </para>
-   <para>
-    Please don't file any support requests without trying to reproduce
-    the problem with increased debug level first. Once you read the log
-    messages, you may even be able to solve the problem on your own.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#debug     1 # Log the destination for each request &my-app; let through.</literallayout>]]>
-<![%config-file;[<literallayout>@@#debug  1024 # Log the destination for requests &my-app; didn't let through, and the reason why.</literallayout>]]>
-<![%config-file;[<literallayout>@@#debug  4096 # Startup banner and warnings</literallayout>]]>
-<![%config-file;[<literallayout>@@#debug  8192 # Non-fatal errors</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="single-threaded"><title>single-threaded</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether to run only one server thread.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para><emphasis>None</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to
-    serve multiple requests simultaneously.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This option is only there for debugging purposes.
-    <emphasis>It will drastically reduce performance.</emphasis>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#single-threaded</literallayout>]]>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hostname"><title>hostname</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The hostname shown on the CGI pages.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Text</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    The hostname provided by the operating system is used.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    On some misconfigured systems resolving the hostname fails or
-    takes too much time and slows Privoxy down. Setting a fixed hostname
-    works around the problem.
-   </para>
-   <para>
-    In other circumstances it might be desirable to show a hostname
-    other than the one returned by the operating system. For example
-    if the system has several different hostnames and you don't want
-    to use the first one.
-   </para>
-   <para>
-    Note that Privoxy does not validate the specified hostname value.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@#hostname hostname.example.org</literallayout>]]>
-</sect3>
-
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="access-control">
-<title>Access Control and Security</title>
-
- <para>
-  This section of the config file controls the security-relevant aspects
-  of <application>Privoxy</application>'s configuration.
- </para>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="listen-address"><title>listen-address</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    The IP address and TCP port on which <application>Privoxy</application> will
-    listen for client requests.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>[<replaceable class="parameter">IP-Address</replaceable>]:<replaceable class="parameter">Port</replaceable></para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>127.0.0.1:8118</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for
-    home users who run <application>Privoxy</application> on the same machine as
-    their browser.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    You will need to configure your browser(s) to this proxy address and port.
-   </para>
-   <para>
-    If you already have another service running on port 8118, or if you want to
-    serve requests from other machines (e.g. on your local network) as well, you
-    will need to override the default.
-   </para>
-   <para>
-    If you leave out the IP address, <application>Privoxy</application> will
-    bind to all interfaces (addresses) on your machine and may become reachable
-    from the Internet. In that case, consider using <link
-    linkend="acls">access control lists</link> (ACL's, see below), and/or
-    a firewall.
-   </para>
-   <para>
-    If you open <application>Privoxy</application> to untrusted users, you will
-    also want to make sure that the following actions are disabled:  <literal><link
-    linkend="enable-edit-actions">enable-edit-actions</link></literal> and
-    <literal><link linkend="enable-remote-toggle">enable-remote-toggle</link></literal>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Example:</term>
-  <listitem>
-   <para>
-     Suppose you are running <application>Privoxy</application> on
-     a machine which has the address 192.168.0.1 on your local private network
-     (192.168.0.0) and has another outside connection with a different address.
-     You want it to serve requests from inside only:
-   </para>
-   <para>
-    <programlisting>
-  listen-address  192.168.0.1:8118
-</programlisting>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@listen-address  127.0.0.1:8118</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="toggle"><title>toggle</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Initial state of "toggle" status
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>1 or 0</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>1</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Act as if toggled on
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    If set to 0, <application>Privoxy</application> will start in
-    <quote>toggled off</quote> mode, i.e. mostly behave like a normal,
-    content-neutral proxy with both ad blocking and content filtering
-    disabled. See <literal>enable-remote-toggle</literal> below.
-<!--
-    This is not really useful
-    anymore, since toggling is much easier via <ulink
-    url="http://config.privoxy.org/toggle";>the web interface</ulink> than via
-    editing the <filename>conf</filename> file.
-
-    Remote toggling is now disabled by default. fk 2007-11-07)
--->
-   </para>
-   <para>
-    The windows version will only display the toggle icon in the system tray
-    if this option is present.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@toggle  1</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="enable-remote-toggle"><title>enable-remote-toggle</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether or not the <ulink url="http://config.privoxy.org/toggle";>web-based toggle
-    feature</ulink> may be used
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>0 or 1</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>0</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    The web-based toggle feature is disabled.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    When toggled off, <application>Privoxy</application> mostly acts like a normal,
-    content-neutral proxy, i.e. doesn't block ads or filter content.
-   </para>
-   <para>
-    Access to the toggle feature can <emphasis>not</emphasis> be
-    controlled separately by <quote>ACLs</quote> or HTTP authentication,
-    so that everybody who can access <application>Privoxy</application> (see
-    <quote>ACLs</quote> and <literal>listen-address</literal> above) can
-    toggle it for all users. So this option is <emphasis>not recommended</emphasis>
-    for multi-user environments with untrusted users.
-   </para>
-   <para>
-    Note that malicious client side code (e.g Java) is also
-    capable of using this option.
-   </para>
-   <para>
-    As a lot of <application>Privoxy</application> users don't read
-    documentation, this feature is disabled by default.
-   </para>
-   <para>
-    Note that you must have compiled <application>Privoxy</application> with
-    support for this feature, otherwise this option has no effect. 
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@enable-remote-toggle  0</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="enable-remote-http-toggle"><title>enable-remote-http-toggle</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether or not Privoxy recognizes special HTTP headers to change its behaviour.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>0 or 1</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>0</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Privoxy ignores special HTTP headers.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    When toggled on, the client can change <application>Privoxy's</application>
-    behaviour by setting special HTTP headers. Currently the only supported
-    special header is <quote>X-Filter: No</quote>, to disable filtering for
-    the ongoing request, even if it is enabled in one of the action files.
-   </para>
-   <para>
-    This feature is disabled by default. If you are using
-    <application>Privoxy</application> in a environment with trusted clients,
-    you may enable this feature at your discretion. Note that malicious client
-    side code (e.g Java) is also capable of using this feature.
-   </para>
-   <para>
-    This option will be removed in future releases as it has been obsoleted
-    by the more general header taggers.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@enable-remote-http-toggle  0</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="enable-edit-actions"><title>enable-edit-actions</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether or not the <ulink url="http://config.privoxy.org/show-status";>web-based actions
-    file editor</ulink> may be used
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>0 or 1</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>0</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    The web-based actions file editor is disabled.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Access to the editor can <emphasis>not</emphasis> be
-    controlled separately by <quote>ACLs</quote> or HTTP authentication,
-    so that everybody who can access <application>Privoxy</application> (see
-    <quote>ACLs</quote> and <literal>listen-address</literal> above) can
-    modify its configuration for all users.
-   </para>
-   <para>
-    This option is <emphasis>not recommended</emphasis> for environments
-    with untrusted users and as a lot of <application>Privoxy</application>
-    users don't read documentation, this feature is disabled by default.
-   </para>
-   <para>
-    Note that malicious client side code (e.g Java) is also
-    capable of using the actions editor and you shouldn't enable
-    this options unless you understand the consequences and are
-    sure your browser is configured correctly.
-   </para>
-   <para>
-    Note that you must have compiled <application>Privoxy</application> with
-    support for this feature, otherwise this option has no effect. 
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@enable-edit-actions 0</literallayout>]]>
-</sect3>
-
-
-<sect3 renderas="sect4" id="enforce-blocks"><title>enforce-blocks</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether the user is allowed to ignore blocks and can <quote>go there anyway</quote>.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable>0 or 1</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>0</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Blocks are not enforced.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    <application>Privoxy</application> is mainly used to block and filter
-    requests as a service to the user, for example to block ads and other
-    junk that clogs the pipes. <application>Privoxy's</application> configuration
-    isn't perfect and sometimes innocent pages are blocked. In this situation it
-    makes sense to allow the user to enforce the request and have
-    <application>Privoxy</application> ignore the block.
-   </para>
-   <para>
-    In the default configuration <application>Privoxy's</application>
-    <quote>Blocked</quote> page contains a <quote>go there anyway</quote>
-    link to adds a special string (the force prefix) to the request URL.
-    If that link is used, <application>Privoxy</application> will
-    detect the force prefix, remove it again and let the request pass.
-   </para>
-   <para>
-    Of course <application>Privoxy</application> can also be used to enforce
-    a network policy. In that case the user obviously should not be able to
-    bypass any blocks, and that's what the <quote>enforce-blocks</quote>
-    option is for. If it's enabled, <application>Privoxy</application> hides
-    the <quote>go there anyway</quote> link. If the user adds the force
-    prefix by hand, it will not be accepted and the circumvention attempt
-    is logged.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    enforce-blocks 1
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@enforce-blocks 0</literallayout>]]>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="acls"><title>
-ACLs: permit-access and deny-access</title>
-<anchor id="permit-access">
-<anchor id="deny-access">
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Who can access what.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable class="parameter">src_addr</replaceable>[/<replaceable class="parameter">src_masklen</replaceable>]
-    [<replaceable class="parameter">dst_addr</replaceable>[/<replaceable class="parameter">dst_masklen</replaceable>]]
-   </para>
-   <para>
-    Where <replaceable class="parameter">src_addr</replaceable> and 
-   <replaceable class="parameter">dst_addr</replaceable> are IP addresses in dotted decimal notation or valid
-    DNS names, and <replaceable class="parameter">src_masklen</replaceable> and
-    <replaceable class="parameter">dst_masklen</replaceable> are subnet masks in CIDR notation, i.e. integer
-    values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole
-    destination part are optional.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Don't restrict access further than implied by <literal>listen-address</literal>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Access controls are included at the request of ISPs and systems
-    administrators, and <emphasis>are not usually needed by individual users</emphasis>.
-    For a typical home user, it will normally suffice to ensure that 
-    <application>Privoxy</application> only listens on the localhost
-    (127.0.0.1) or internal (home) network address by means of the
-    <link linkend="listen-address"><emphasis>listen-address</emphasis></link>
-    option. 
-   </para>
-   <para>
-    Please see the warnings in the FAQ that <application>Privoxy</application>
-    is not intended to be a substitute for a firewall or to encourage anyone
-    to defer addressing basic security weaknesses.
-   </para>
-   <para>
-    Multiple ACL lines are OK.
-    If any ACLs are specified, <application>Privoxy</application> only talks
-    to IP addresses that match at least one <literal>permit-access</literal> line
-    and don't match any subsequent <literal>deny-access</literal> line. In other words, the
-    last match wins, with the default being <literal>deny-access</literal>.
-   </para>
-   <para>
-    If <application>Privoxy</application> is using a forwarder (see <literal>forward</literal> below)
-    for a particular destination URL, the <replaceable class="parameter">dst_addr</replaceable>
-    that is examined is the address of the forwarder and <emphasis>NOT</emphasis> the address
-    of the ultimate target. This is necessary because it may be impossible for the local
-    <application>Privoxy</application> to determine the IP address of the
-    ultimate target (that's often what gateways are used for).
-   </para>
-   <para>
-    You should prefer using IP addresses over DNS names, because the address lookups take
-    time. All DNS names must resolve! You can <emphasis>not</emphasis> use domain patterns
-    like <quote>*.org</quote> or partial domain names. If a DNS name resolves to multiple
-    IP addresses, only the first one is used.
-   </para>
-   <para>
-    Denying access to particular sites by ACL may have undesired side effects
-    if the site in question is hosted on a machine which also hosts other sites
-    (most sites are).
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    Explicitly define the default behavior if no ACL and
-    <literal>listen-address</literal> are set: <quote>localhost</quote>
-    is OK. The absence of a <replaceable class="parameter">dst_addr</replaceable> implies that
-    <emphasis>all</emphasis> destination addresses are OK:
-   </para>
-   <para>
-    <screen>
-  permit-access  localhost
-</screen>
-   </para>
-   <para>
-    Allow any host on the same class C subnet as www.privoxy.org access to
-    nothing but www.example.com (or other domains hosted on the same system):
-   </para>
-   <para>
-    <screen>
-  permit-access  www.privoxy.org/24 www.example.com/32
-</screen>
-   </para>
-   <para>
-    Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere,
-    with the exception that 192.168.45.73 may not access the IP address behind
-    www.dirty-stuff.example.com:
-   </para>
-   <para>
-    <screen>
-  permit-access  192.168.45.64/26
-  deny-access    192.168.45.73    www.dirty-stuff.example.com
-</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="buffer-limit"><title>buffer-limit</title>
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Maximum size of the buffer for content filtering.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>Size in Kbytes</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>4096</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Use a 4MB (4096 KB) limit.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    For content filtering, i.e. the <literal>+filter</literal> and
-    <literal>+deanimate-gif</literal> actions, it is necessary that 
-    <application>Privoxy</application> buffers the entire document body.
-    This can be potentially dangerous, since a server could just keep sending
-    data indefinitely and wait for your RAM to exhaust -- with nasty consequences.
-    Hence this option.
-   </para>
-   <para>
-    When a document buffer size reaches the <literal>buffer-limit</literal>, it is
-    flushed to the client unfiltered and no further attempt to
-    filter the rest of the document is made. Remember that there may be multiple threads
-    running, which might require up to <literal>buffer-limit</literal> Kbytes
-    <emphasis>each</emphasis>, unless you have enabled <quote>single-threaded</quote>
-    above.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<![%config-file;[<literallayout>@@buffer-limit 4096</literallayout>]]>
-</sect3>
-
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="forwarding">
-<title>Forwarding</title>
-
-<para>
- This feature allows routing of HTTP requests through a chain of
- multiple proxies.
-</para>
-<para>
- Forwarding can be used to chain Privoxy with a caching proxy to speed
- up browsing. Using a parent proxy may also be necessary if the machine
- that <application>Privoxy</application> runs on has no direct Internet access.
-</para>
-<para>
- Note that parent proxies can severely decrease your privacy level.
- For example a parent proxy could add your IP address to the request
- headers and if it's a caching proxy it may add the <quote>Etag</quote>
- header to revalidation requests again, even though you configured Privoxy
- to remove it. It may also ignore Privoxy's header time randomization and use the
- original values which could be used by the server as cookie replacement
- to track your steps between visits.
-</para>
-
-<para>
- Also specified here are SOCKS proxies. <application>Privoxy</application>
- supports the SOCKS 4 and SOCKS 4A protocols.
-</para>
-
-<sect3 renderas="sect4" id="forward"><title>forward</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    To which parent HTTP proxy specific requests should be routed.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable class="parameter">target_pattern</replaceable>
-    <replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>]
-   </para>
-   <para>
-    where <replaceable class="parameter">target_pattern</replaceable> is a <link linkend="af-patterns">URL pattern</link> 
-    that specifies to which requests (i.e. URLs) this forward rule shall apply. Use <literal>/</literal> to
-    denote <quote>all URLs</quote>.
-    <replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>]
-    is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded,
-    optionally followed by its listening port (default: 8080).
-    Use a single dot (<literal>.</literal>) to denote <quote>no forwarding</quote>.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Don't use parent HTTP proxies.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    If <replaceable class="parameter">http_parent</replaceable> is <quote>.</quote>, then requests are not
-    forwarded to another HTTP proxy but are made directly to the web servers.
-   </para>
-   <para>
-    Multiple lines are OK, they are checked in sequence, and the last match wins.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    Everything goes to an example parent proxy, except SSL on port 443 (which it doesn't handle):
-   </para>
-   <para>
-    <screen>
-  forward   /      parent-proxy.example.org:8080
-  forward   :443   .
-</screen>
-   </para>
-   <para>
-    Everything goes to our example ISP's caching proxy, except for requests
-    to that ISP's sites:
-   </para>
-   <para>
-    <screen>
-  forward   /                  caching-proxy.isp.example.net:8000
-  forward   .isp.example.net   .
-</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="socks"><title>
-forward-socks4, forward-socks4a and forward-socks5</title>
-<anchor id="forward-socks4">
-<anchor id="forward-socks4a">
-
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Through which SOCKS proxy (and optionally to which parent HTTP proxy) specific requests should be routed.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable class="parameter">target_pattern</replaceable>
-    <replaceable class="parameter">socks_proxy</replaceable>[:<replaceable class="parameter">port</replaceable>]
-    <replaceable class="parameter">http_parent</replaceable>[:<replaceable class="parameter">port</replaceable>]
-   </para>
-   <para>
-    where <replaceable class="parameter">target_pattern</replaceable> is a
-    <link linkend="af-patterns">URL pattern</link> that specifies to which
-    requests (i.e. URLs) this forward rule shall apply. Use <literal>/</literal> to
-    denote <quote>all URLs</quote>. <replaceable class="parameter">http_parent</replaceable>
-    and <replaceable class="parameter">socks_proxy</replaceable>
-    are IP addresses in dotted decimal notation or valid DNS names
-    (<replaceable class="parameter">http_parent</replaceable>
-    may be <quote>.</quote> to denote <quote>no HTTP forwarding</quote>), and the optional 
-    <replaceable class="parameter">port</replaceable> parameters are TCP ports,
-    i.e. integer values from 1 to 65535
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>Unset</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Don't use SOCKS proxies.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Multiple lines are OK, they are checked in sequence, and the last match wins.
-   </para>
-   <para>
-    The difference between <literal>forward-socks4</literal> and <literal>forward-socks4a</literal>
-    is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS
-    server, while in SOCKS 4 it happens locally.
-   </para>
-   <para>
-    With <literal>forward-socks5</literal> the DNS resolution will happen on the remote server as well.
-   </para>
-   <para>
-    If <replaceable class="parameter">http_parent</replaceable> is <quote>.</quote>, then requests are not
-    forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through
-    a SOCKS proxy.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-     From the company example.com, direct connections are made to all
-     <quote>internal</quote> domains, but everything outbound goes through
-     their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to
-     the Internet.
-   </para>
-   <para>
-    <screen>
-  forward-socks4a   /              socks-gw.example.com:1080  www-cache.isp.example.net:8080
-  forward           .example.com   .
-</screen>
-   </para>
-   <para>
-    A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this:
-   </para>
-   <para>
-    <screen>
-  forward-socks4   /               socks-gw.example.com:1080  .
-</screen>
-   </para>
-  
-    <para>
-    To chain Privoxy and Tor, both running on the same system, you would use 
-    something like:
-   </para>
-   <para>
-    <screen>
-  forward-socks4a   /               127.0.0.1:9050 .
-</screen>
-   </para>
-
-    <para>
-    The public <application>Tor</application> network can't be used to
-    reach your local network, if you need to access local servers you
-    therefore might want to make some exceptions:
-   </para>
-   <para>
-    <screen>
-  forward         192.168.*.*/     .
-  forward            10.*.*.*/     .
-  forward           127.*.*.*/     .
-</screen>
-   </para>
-   <para>
-    Unencrypted connections to systems in these address ranges will
-    be as (un)secure as the local network is, but the alternative is that you
-    can't reach the local network through <application>Privoxy</application>
-    at all. Of course this may actually be desired and there is no reason
-    to make these exceptions if you aren't sure you need them.
-   </para>
-   <para>
-    If you also want to be able to reach servers in your local network by
-    using their names, you will need additional exceptions that look like
-    this:
-   </para>
-   <para>
-    <screen>
- forward           localhost/     .
-</screen>
-   </para>
-
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-<![%user-man;[     <!-- not included in config due to length -->
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="advanced-forwarding-examples"><title>Advanced Forwarding Examples</title>
-
-<para>
- If you have links to multiple ISPs that provide various special content 
- only to their subscribers, you can configure multiple <application>Privoxies</application>
- which have connections to the respective ISPs to act as forwarders to each other, so that
- <emphasis>your</emphasis> users can see the internal content of all ISPs.
-</para>
-
-<para>
- Assume that host-a has a PPP connection to isp-a.example.net. And host-b has a PPP connection to
- isp-b.example.org. Both run <application>Privoxy</application>. Their forwarding
- configuration can look like this:
-</para>
-
-<para>
- host-a:
-</para>
-
-<para>
- <screen>
-  forward    /           .
-  forward    .isp-b.example.net  host-b:8118
-</screen>
-</para>
-
-<para>
- host-b:
-</para>
-
-<para>
- <screen>
-  forward    /           .
-  forward    .isp-a.example.org  host-a:8118
-</screen>
-</para>
-
-<para>
- Now, your users can set their browser's proxy to use either
- host-a or host-b and be able to browse the internal content
- of both isp-a and isp-b.
-</para>
-
-<para>
- If you intend to chain <application>Privoxy</application> and 
- <application>squid</application> locally, then chaining as 
- <literal>browser -> squid -> privoxy</literal> is the recommended way. 
-</para>
-
-<para>
- Assuming that <application>Privoxy</application> and <application>squid</application>
- run on the same box, your <application>squid</application> configuration could then look like this:
-</para>
-
-<para>
- <screen>
-  # Define Privoxy as parent proxy (without ICP) 
-  cache_peer 127.0.0.1 parent 8118 7 no-query 
-
-  # Define ACL for protocol FTP 
-  acl ftp proto FTP 
-
-  # Do not forward FTP requests to Privoxy
-  always_direct allow ftp 
-
-  # Forward all the rest to Privoxy
-  never_direct allow all</screen>
-</para>
-
-<para>
- You would then need to change your browser's proxy settings to <application>squid</application>'s address and port.
- Squid normally uses port 3128. If unsure consult <literal>http_port</literal> in <filename>squid.conf</filename>.
-</para>
-
-<para>
- You could just as well decide to only forward requests you suspect
- of leading to Windows executables through a virus-scanning parent proxy,
- say, on <literal>antivir.example.com</literal>, port 8010:
-</para>
-
-<para>
- <screen>
-  forward   /                          .
-  forward   /.*\.(exe|com|dll|zip)$    antivir.example.com:8010</screen> 
-</para>
-
-</sect3>
-]]>
-
-<sect3 renderas="sect4" id="forwarded-connect-retries"><title>forwarded-connect-retries</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    How often Privoxy retries if a forwarded connection request fails. 
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable class="parameter">Number of retries.</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>0</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Connections forwarded through other proxies are treated like direct connections and no retry attempts are made.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    <replaceable class="parameter">forwarded-connect-retries</replaceable> is mainly interesting
-    for socks4a connections, where <application>Privoxy</application> can't detect why the connections failed.
-    The connection might have failed because of a DNS timeout in which case a retry makes sense,
-    but it might also have failed because the server doesn't exist or isn't reachable. In this
-    case the retry will just delay the appearance of Privoxy's error message.
-   </para>
-   <para>
-    Note that in the context of this option, <quote>forwarded connections</quote> includes all connections
-    that Privoxy forwards through other proxies. This option is not limited to the HTTP CONNECT method.
-   </para>
-   <para>
-    Only use this option, if you are getting lots of forwarding-related error messages
-    that go away when you try again manually. Start with a small value and check Privoxy's
-    logfile from time to time, to see how many retries are usually needed.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    forwarded-connect-retries 1
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@forwarded-connect-retries  0</literallayout>]]>
-</sect3>
-
-<sect3 renderas="sect4" id="accept-intercepted-requests"><title>accept-intercepted-requests</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether intercepted requests should be treated as valid.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable>0 or 1</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>0</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Only proxy requests are accepted, intercepted requests are treated as invalid.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    If you don't trust your clients and want to force them
-    to use <application>Privoxy</application>, enable this
-    option and configure your packet filter to redirect outgoing
-    HTTP connections into <application>Privoxy</application>. 
-   </para>
-   <para>
-    Make sure that <application>Privoxy's</application> own requests
-    aren't redirected as well. Additionally take care that
-    <application>Privoxy</application> can't intentionally connect
-    to itself, otherwise you could run into redirection loops if
-    <application>Privoxy's</application> listening port is reachable
-    by the outside or an attacker has access to the pages you visit.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    accept-intercepted-requests 1
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@accept-intercepted-requests 0</literallayout>]]>
-</sect3>
-
-<sect3 renderas="sect4" id="allow-cgi-request-crunching"><title>allow-cgi-request-crunching</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether requests to <application>Privoxy's</application> CGI pages can be blocked or redirected.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable>0 or 1</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>0</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    <application>Privoxy</application> ignores block and redirect actions for its CGI pages.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    By default <application>Privoxy</application> ignores block or redirect actions
-    for its CGI pages. Intercepting these requests can be useful in multi-user
-    setups to implement fine-grained access control, but it can also render the complete
-    web interface useless and make debugging problems painful if done without care.
-   </para>
-   <para>
-    Don't enable this option unless you're sure that you really need it.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    allow-cgi-request-crunching 1
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@allow-cgi-request-crunching 0</literallayout>]]>
-</sect3>
-
-<sect3 renderas="sect4" id="split-large-forms"><title>split-large-forms</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Whether the CGI interface should stay compatible with broken HTTP clients.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable>0 or 1</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para><emphasis>0</emphasis></para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    The CGI form generate long GET URLs.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    <application>Privoxy's</application> CGI forms can lead to
-    rather long URLs. This isn't a problem as far as the HTTP
-    standard is concerned, but it can confuse clients with arbitrary
-    URL length limitations.
-   </para>
-   <para>
-    Enabling split-large-forms causes <application>Privoxy</application>
-    to divide big forms into smaller ones to keep the URL length down.
-    It makes editing a lot less convenient and you can no longer
-    submit all changes at once, but at least it works around this
-    browser bug.
-   </para>
-   <para>
-    If you don't notice any editing problems, there is no reason
-    to enable this option, but if one of the submit buttons appears
-    to be broken, you should give it a try.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    split-large-forms 1
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@split-large-forms 0</literallayout>]]>
-</sect3>
-
-<sect3 renderas="sect4" id="keep-alive-timeout"><title>keep-alive-timeout</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Number of seconds after which an open connection will no longer be reused.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable>Time in seconds.</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>None</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    Connections are not reused.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This option has no effect if <application>Privoxy</application>
-    has been compiled without keep-alive support.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Note that reusing connections doesn't necessary cause speedups.
-    There are also a few privacy implications you should be aware of.
-   </para>
-   <para>
-    Outgoing connections are shared between clients (if there are more
-    than one) and closing the client that initiated the outgoing connection
-    does not affect the connection between &my-app; and the server unless
-    the client's request hasn't been completed yet. If the outgoing connection
-    is idle, it will not be closed until either <application>Privoxy's</application>
-    or the server's timeout is reached. While it's open, the server knows
-    that the system running &my-app; is still there.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    keep-alive-timeout 300
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@keep-alive-timeout 300</literallayout>]]>
-</sect3>
-
-
-<sect3 renderas="sect4" id="socket-timeout"><title>socket-timeout</title>
-<variablelist>
- <varlistentry>
-  <term>Specifies:</term>
-  <listitem>
-   <para>
-    Number of seconds after which a socket times out if
-    no data is received.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Type of value:</term>
-  <listitem>
-   <para>
-    <replaceable>Time in seconds.</replaceable>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Default value:</term>
-  <listitem>
-   <para>None</para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Effect if unset:</term>
-  <listitem>
-   <para>
-    A default value of 300 seconds is used.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    For SOCKS requests the timeout currently doesn't start until
-    the SOCKS server accepted the request. This will be fixed in
-    the next release.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Examples:</term>
-  <listitem>
-   <para>
-    socket-timeout 300
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-<![%config-file;[<literallayout>@@socket-timeout 300</literallayout>]]>
-</sect3>
-
-
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="windows-gui">
-<title>Windows GUI Options</title>
-<para>
- <application>Privoxy</application> has a number of options specific to the
- Windows GUI interface:
-</para>
-
-<anchor id="activity-animation">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- If <quote>activity-animation</quote> is set to 1, the
- <application>Privoxy</application> icon will animate when
- <quote>Privoxy</quote> is active. To turn off, set to 0.
-</para>
-
-<![%config-file;[<literallayout>@@#activity-animation   1</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>activity-animation   1</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="log-messages">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- If <quote>log-messages</quote> is set to 1,
- <application>Privoxy</application> will log messages to the console
- window:
-</para>
-
-<![%config-file;[<literallayout>@@#log-messages   1</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>log-messages       1</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="log-buffer-size">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para> 
- If <quote>log-buffer-size</quote> is set to 1, the size of the log buffer,
- i.e. the amount of memory used for the log messages displayed in the
- console window, will be limited to <quote>log-max-lines</quote> (see below).
-</para>
-
-<para>
- Warning: Setting this to 0 will result in the buffer to grow infinitely and
- eat up all your memory!
-</para>
-
-<![%config-file;[<literallayout>@@#log-buffer-size 1</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>log-buffer-size      1</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="log-max-lines">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- <application>log-max-lines</application> is the maximum number of lines held
- in the log buffer. See above.
-</para>
-
-<![%config-file;[<literallayout>@@#log-max-lines 200</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>log-max-lines      200</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="log-highlight-messages">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- If <quote>log-highlight-messages</quote> is set to 1,
- <application>Privoxy</application> will highlight portions of the log
- messages with a bold-faced font:
-</para>
-
-<![%config-file;[<literallayout>@@#log-highlight-messages 1</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>log-highlight-messages   1</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="log-font-name">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- The font used in the console window:
-</para>
-
-<![%config-file;[<literallayout>@@#log-font-name Comic Sans MS</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>log-font-name        Comic Sans MS</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="log-font-size">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- Font size used in the console window:
-</para>
-
-<![%config-file;[<literallayout>@@#log-font-size 8</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>log-font-size        8</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="show-on-task-bar">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>  
- <quote>show-on-task-bar</quote> controls whether or not
- <application>Privoxy</application> will appear as a button on the Task bar
- when minimized:
-</para>
-
-<![%config-file;[<literallayout>@@#show-on-task-bar 0</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>show-on-task-bar     0</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="close-button-minimizes">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- If <quote>close-button-minimizes</quote> is set to 1, the Windows close
- button will minimize <application>Privoxy</application> instead of closing
- the program (close with the exit option on the File menu).
-</para>
-
-<![%config-file;[<literallayout>@@#close-button-minimizes 1</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  <emphasis>close-button-minimizes  1</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-<anchor id="hide-console">
-<![%config-file;[<para>@@</para>]]> <!-- for spacing -->
-<para>
- The <quote>hide-console</quote> option is specific to the MS-Win console
- version of <application>Privoxy</application>. If this option is used,
- <application>Privoxy</application> will disconnect from and hide the
- command console.
-</para>
-
-<![%config-file;[<literallayout>@@#hide-console</literallayout>]]>
-<![%user-man;[
-<para>
- <literal>
-  <msgtext> 
-   <literallayout>
-  #<emphasis>hide-console</emphasis>
-   </literallayout>
-  </msgtext> 
- </literal>
-</para>
-]]>
-
-</sect2>
-</sect1>
-
-<!-- end config content common to both outputs -->
-
-<![%config-file;[
-<!-- These are dummy anchors to keep the processor quiet            -->
-<!-- when building config-file only (ie. they are used in u-m only) -->
-<sect1 label="">
-<title></title>
-<anchor id="filter">
-<anchor id="filter-file">
-<anchor id="regex">
-<anchor id="actions-file">
-<anchor id="af-patterns">
-</sect1>
-]]>
-
-<!-- eof p-config.sgml -->
diff --git a/external/privoxy/doc/source/privoxy-man-page.sgml b/external/privoxy/doc/source/privoxy-man-page.sgml
deleted file mode 100644
index ea336e3..0000000
--- a/external/privoxy/doc/source/privoxy-man-page.sgml
+++ /dev/null
@@ -1,352 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/privoxy-man-page.sgml,v $
-
- Purpose     :  Manual Page
-                This file belongs into
-                ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-                
- $Id: privoxy-man-page.sgml,v 2.29 2009/02/19 02:20:22 hal9 Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. 
- ========================================================================
-
- Doc NOTES: This is some tricky markup! There are some quirks
- to how this markup is handled. It is not always so co-operative.
- Please don't change the markup unless you can verify the changes 
- will improve finished output! 
- 
- literallayout tags are particularly sensitive to where they are placed.
- The 'replaceable' and 'command' tags are used here somewhat unconventionally,
- since it seems to generate the proper formatting (at least for me :).
-
- Create man page: 'make man'
-
- Requires docbook2man (short perl script), see CVS
- http://sources.redhat.com/docbook-tools/. Also requires openjade and SGMLSpm
- perl module. 
- 
- For man page references, see:
- http://www.linuxdoc.org/HOWTO/mini/DocBook-Install/using.html
- http://docbook.org/tdg/en/html/ch02.html#making-refentry
-
--->
-<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN"[
-<!entity % dummy "IGNORE"> 
-<!entity p-intro SYSTEM "privoxy.sgml">
-<!entity seealso SYSTEM "seealso.sgml">
-<!entity copyright SYSTEM "copyright.sgml">
-<!entity license SYSTEM "license.sgml">
-<!entity authors SYSTEM "p-authors.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity % p-text "IGNORE">           <!-- define we are not a text only doc -->
-<!entity % p-authors-formal "IGNORE"> <!-- exclude additional formating      -->
-<!entity my-copy "(C)">               <!-- db2man barfs on copyright symbol  -->
-<!entity % seealso-extra "IGNORE">    <!-- for excluding sections of seealso -->
-]>
-
-<refentry id="privoxy">
-<refentryinfo>
- <date>2009-02-15</date>
-</refentryinfo>
-<refmeta>
- <refentrytitle>privoxy</refentrytitle> 
- <manvolnum>1</manvolnum>
- <refmiscinfo>
-  Privoxy &p-version;<![%p-not-stable;[ &p-status;]]>
- </refmiscinfo>
-</refmeta>
-
-<refnamediv>
- <refname><application>privoxy</application></refname>
- <refpurpose>Privacy Enhancing Proxy</refpurpose>
-</refnamediv>
-
-<refsynopsisdiv>
- <cmdsynopsis> 
-  <command>privoxy</command>
-  <arg><option>--help</option></arg>
-  <arg><option>--version</option></arg>
-  <arg><option>--no-daemon</option></arg>
-  <arg><option>--pidfile </option><replaceable class="parameter">pidfile</replaceable></arg>  
-  <arg><option>--user </option><replaceable class="parameter">user[.group]</replaceable></arg> 
-  <arg><option>--chroot</option></arg>
-  <arg><option>--pre-chroot-nslookup </option><replaceable class="parameter">hostname</replaceable></arg> 
-  <arg><replaceable class="parameter">configfile</replaceable></arg>        
- </cmdsynopsis>
-
-</refsynopsisdiv>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Options</title>
- <para>
-  <command>Privoxy</command> may be invoked with the following command line
-  options:
- </para>
-
- <variablelist>                                          
-  <varlistentry>
-    <term>--help</term>
-      <listitem>
-       <para>
-         Print brief usage info and exit.
-        </para>
-      </listitem>
-  </varlistentry>
-
-  <varlistentry>
-    <term>--version</term>
-      <listitem>
-       <para>
-         Print version info and exit.
-        </para>
-      </listitem>
-  </varlistentry>
-
-  <varlistentry>
-    <term>--no-daemon</term>
-     <listitem>
-      <para>
-        Don't  become  a daemon, i.e. don't fork and become process group
-        leader, don't detach from controlling tty, and do all logging there.
-      </para>
-    </listitem>
-  </varlistentry>
-
-  <varlistentry>
-    <term>--pidfile <replaceable class="parameter">pidfile</replaceable></term>
-     <listitem>
-      <para>
-        On startup, write the process ID to <replaceable class="parameter">pidfile</replaceable>.
-        Delete the <replaceable class="parameter">pidfile</replaceable> on exit.
-        Failure to create or delete the <replaceable class="parameter">pidfile</replaceable>
-        is non-fatal. If no <command>--pidfile</command> option is given, no PID file will be used.
-      </para>
-    </listitem>
-  </varlistentry>
-
-  <varlistentry>
-    <term>--user <replaceable class="parameter">user[.group]</replaceable></term>
-     <listitem>
-      <para>
-       <!-- Note: replaceable is maybe the wrong tag, but generates  -->
-       <!-- correct looking man output.                              -->
-       After (optionally) writing the PID file, assume the user ID of
-       <replaceable class="parameter">user</replaceable> and the GID of
-       <replaceable class="parameter">group</replaceable>, or, if the optional
-       <replaceable class="parameter">group</replaceable> was not given, the default group of
-       <replaceable class="parameter">user</replaceable>. Exit if the privileges are not
-       sufficient to do so.
-     </para>
-    </listitem>
-  </varlistentry>
-  <varlistentry>
-    <term>--chroot</term>
-     <listitem>
-      <para>
-       Before changing to the user ID given in the --user option, chroot to
-       that user's home directory, i.e. make the kernel pretend to the
-       <command>Privoxy</command> process that the directory tree starts
-       there. If set up carefully, this can limit the impact of possible
-       vulnerabilities in <command>Privoxy</command> to the files contained in
-       that hierarchy. 
-      </para>
-    </listitem>
-  </varlistentry>
-  <varlistentry>
-    <term>--pre-chroot-nslookup <replaceable class="parameter">hostname</replaceable></term>
-     <listitem>
-      <para>
-        Initialize the resolver library using <replaceable class="parameter">hostname</replaceable>
-        before chroot'ing. On some systems this reduces the number of files
-        that must be copied into the chroot tree.
-     </para>
-    </listitem>
-  </varlistentry>
- </variablelist>
-
- <para>
-  If the <filename>configfile</filename> is not specified on  the  command  line,
-  <command>Privoxy</command>  will  look for a file named
-  <filename>config</filename> in the current directory. If no
-  <filename>configfile</filename> is found, <command>Privoxy</command> will 
-  fail to start.
- </para>
-
-</refsect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Description</title>
-<!-- Include privoxy.sgml boilerplate: -->
- &p-intro;
-<!-- end boilerplate -->
-</refsect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Installation and Usage</title>
-<para>
- Browsers can either be individually configured to use
- <command>Privoxy</command> as a HTTP proxy (recommended),
- or <command>Privoxy</command> can be combined with a packet
- filter to build an intercepting proxy
- (see <filename>config</filename>).  The default setting is  for
- localhost,  on port  8118 (configurable in the main config file).  To set the
- HTTP proxy in Firefox, go through: <command>Tools</command>; 
- <command>Options</command>; <command>General</command>;
- <command>Connection Settings</command>;
- <command>Manual Proxy Configuration</command>. 
-</para>
-<para>
- For Internet Explorer, go through: <command>Tools</command>; 
- <command>Internet Properties</command>; <command>Connections</command>;
- <command>LAN Settings</command>. 
-</para>
-<para>
- The Secure (SSL) Proxy should also be set to the same values, otherwise
- https: URLs will not be proxied. Note: <command>Privoxy</command> can only
- proxy HTTP and HTTPS traffic. Do not try it with FTP or other protocols.
- HTTPS presents some limitations, and not all features will work with HTTPS 
- connections.
-</para>
-
-<para>
- For other browsers, check the documentation.
-</para>
-</refsect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Configuration</title>
-<para>
- <command>Privoxy</command> can be configured with the various configuration
- files. The default configuration files are: <filename>config</filename>,
- <filename>default.filter</filename>, <filename>default.action</filename> and
- <filename>default.action</filename>. <filename>user.action</filename> should 
- be used for locally defined exceptions to the default rules in
- <filename>match-all.action</filename> and <filename>default.action</filename>,
- and <filename>user.filter</filename> for locally defined filters. These are
- well commented.  On Unix and Unix-like systems, these are located in
- <filename>/etc/privoxy/</filename> by default. 
-</para>
-<para> 
- <command>Privoxy</command> uses the concept of <command>actions</command> 
- in order to manipulate the data stream between the browser and remote sites.
- There are various actions available with specific functions for such things 
- as blocking web sites, managing cookies, etc. These actions can be invoked
- individually or combined, and used against individual URLs, or groups of URLs 
- that can be defined using wildcards and regular expressions. The result is
- that the user has greatly enhanced control and freedom.
-</para>
-<para>
- The actions list (ad blocks, etc) can also be configured with your
- web browser at <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink> 
- (assuming the configuration allows it).
- <command>Privoxy's</command> configuration parameters  can also  be viewed at
- the same page. In addition, <command>Privoxy</command> can be toggled on/off.
- This is an internal page, and does not require Internet access.
-</para>
-<para>
- See the <ulink
- url="http://www.privoxy.org/user-manual/";><citetitle>User Manual</citetitle></ulink> for a detailed
- explanation of installation, general usage, all configuration options, new
- features and notes on upgrading.
-</para>
-</refsect1>
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Files</title>
-<!-- this is a cheesy way to do this, but WTF. -->
-<literallayout> 
- <filename>/usr/sbin/privoxy</filename>
- <filename>/etc/privoxy/config</filename>
- <filename>/etc/privoxy/match-all.action</filename>
- <filename>/etc/privoxy/default.action</filename>
- <filename>/etc/privoxy/user.action</filename>
- <filename>/etc/privoxy/default.filter</filename>
- <filename>/etc/privoxy/user.filter</filename>
- <filename>/etc/privoxy/trust</filename>
- <filename>/etc/privoxy/templates/*</filename>
- <filename>/var/log/privoxy/logfile</filename>
-</literallayout>
-
-<para>
- Various other files should be included, but may vary depending on platform
- and build configuration. Additional documentation should be included in the local
- documentation directory.
-</para>
-
-</refsect1>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Signals</title>
-<para>
- <!-- command tag is used here to get proper looking format  -->
- <command>Privoxy</command> terminates on the <command>SIGINT</command>,
- <command>SIGTERM</command> and <command>SIGABRT</command> signals. Log
- rotation scripts may cause a re-opening of the logfile by sending a 
- <command>SIGHUP</command> to <command>Privoxy</command>. Note that unlike
- other daemons,  <command>Privoxy</command> does not need to be made aware of
- config file changes by <command>SIGHUP</command> -- it will detect them
- automatically. 
-</para>
-
-</refsect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Notes</title>
-<![%p-not-stable;[
-<para>
- This is a &p-status; version of <command>Privoxy</command>. Not 
- all features are well tested.
-</para>]]>
-<para>
- Please see the <citetitle>User Manual</citetitle> on how to contact the
- developers, for feature requests, reporting problems, and other questions.
-</para>
-
-</refsect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>See Also</title>
-<!-- Include seealso.sgml boilerplate: -->
- &seealso;
-<!-- end boilerplate -->
-</refsect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Development Team</title>
-<!-- Include p-authors.sgml boilerplate: -->
- &authors;
-<!-- end boilerplate -->
-</refsect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<refsect1><title>Copyright and License</title>
-
-<refsect2><title>Copyright</title>
-<!-- Include copyright.sgml boilerplate: -->
- &copyright;
-<!-- end boilerplate -->
-</refsect2>
-
-<refsect2><title>License</title>
-<!-- Include license.sgml boilerplate: -->
- &license;
-<!-- end boilerplate -->
-</refsect2>
-</refsect1>
-
-</refentry>
diff --git a/external/privoxy/doc/source/privoxy.sgml b/external/privoxy/doc/source/privoxy.sgml
deleted file mode 100644
index 1e4791f..0000000
--- a/external/privoxy/doc/source/privoxy.sgml
+++ /dev/null
@@ -1,44 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/privoxy.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: privoxy.sgml,v 2.9 2009/03/21 12:42:49 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  privoxy-man-page
-  user-manual
-  faq
-  developer-manual
-  README
-  webserver/index.sgml
-
--->
-
-<para>
- Privoxy is a non-caching web proxy with advanced filtering capabilities
- for enhancing privacy, modifying web page data and HTTP headers, controlling
- access, and removing ads and other obnoxious Internet junk. Privoxy has a
- flexible configuration and can be customized to suit individual needs and tastes.
- It has application for both stand-alone systems and multi-user networks.
-</para>
-
-<para>
- Privoxy is Free Software and licensed under the GPL2.
-</para>
-
-<para>
- Privoxy is an associated project of Software in the Public Interest (SPI).
- <ulink url="http://www.privoxy.org/faq/general.html#DONATE";>Donations are welcome</ulink>.
-</para>
diff --git a/external/privoxy/doc/source/readme.sgml b/external/privoxy/doc/source/readme.sgml
deleted file mode 100644
index 3bbacf7..0000000
--- a/external/privoxy/doc/source/readme.sgml
+++ /dev/null
@@ -1,268 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
-<!entity % dummy "IGNORE"> 
-<!entity supported SYSTEM "supported.sgml">
-<!entity p-intro SYSTEM "privoxy.sgml">
-<!entity contacting SYSTEM "contacting.sgml">
-<!entity buildsource SYSTEM "buildsource.sgml">
-<!entity p-version "3.0.12">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity % p-text "INCLUDE">       <!-- define we are a text only doc    -->
-<!entity % p-doc "IGNORE">         <!-- and never a text doc             -->
-<!entity % p-readme "INCLUDE">     <!-- all your README belong to us     -->
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/readme.sgml,v $
-
- Purpose     :  README for Privoxy
-                
- $Id: readme.sgml,v 2.26 2009/03/21 11:32:38 hal9 Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. You have been warned!
- Failure to abide by this rule will result in the revocation of your license 
- to live a peaceful existence!
- ========================================================================
-
- ===================================================================
- READ: Document Note: This file generates the README in the top level 
- source directory. It is generated as only a plain text file. The 
- current markup is not suitable for other formats. Build from 
- Makefile with 'make dok-readme'.
- ===================================================================
-
- READ:
-
- ======================================================================
- NOTE: The left margin spacing is *important* when using 'literallayout'
- WYSISWYG!!! Don't mess this up!!! Careful with linebreaks too, ie 
- the para tag forces a linebreak. Tags need to be carefully placed as a result
- to avoid extra blank lines, etc. 
- ======================================================================
-
- For stable releases, change 
- 
-  entity % p-not-stable "INCLUDE" 
- 
- to 
- 
-  entity % p-not-stable "IGNORE" 
-  
- in the DTD at the top. This will toggle various text 'off'. BOTH
- MUST be toggled in this case or you will get both text referencing 
- stable and unstable versions. You only want one or the other!
-
--->
-<article id="index">
-<artheader>
-<![%dummy;[
- <para>
- <comment>
-  This is here to keep vim syntax file from breaking :/
-  If I knew enough to fix it, I would.
-  PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
- </comment>
- </para>
-]]>
-<abstract>
-<para>
- <literal>
-  <msgtext>
-   <literallayout>
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/doc/source/readme.sgml,v $
- *
- * Purpose     :  README file to give a short intro.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009  the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
- *                USA
- *
- *********************************************************************/
-</literallayout>
-</msgtext>
-</literal>
-</para>
-
-<para>
- <!-- include some conditional text -->
- This README is included with <![%p-not-stable;[ the development version of]]>
- Privoxy &p-version;. See http://www.privoxy.org/ for more information. The current code maturity
- level is <quote>&p-status;</quote><![%p-not-stable;[, but seems stable to us :)]]>.
-</para>
-</abstract>
-</artheader>
-
-<!-- Include privoxy.sgml boilerplate: -->
-&p-intro;
-<!-- end boilerplate -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="importantchanges" ><title>IMPORTANT CHANGES</title>
-<para>
- March 2009, Privoxy 3.0.12 is released.
-</para>
-<para>
- This is primarily a bug fix release. See the "ChangeLog", and the "What's
- New" section and the "Upgrader's Notes" in <citetitle>the User
- Manual</citetitle> for details. 
-</para>
-
-<para>
- February 2009, Privoxy 3.0.11 is released.
-</para>
-<para>
- As usual there are changes that effect the configuration. See the "ChangeLog",
- and the "What's New" section and the "Upgrader's Notes" in
- <citetitle>the User Manual</citetitle> for details and specifics. 
-</para>
-<para>
- This is a stable release, and marks a departure for Privoxy development.
-</para>
-<para>
- Previously, odd numbered releases were considered beta versions and
- were only released at the end of the development cycle when the code
- was already believed to be stable. Usually it was, so the stable release
- contained pretty much the same code, but got a higher version number.
- In the future we intend to release several snapshots between stable releases.
- There will probably still be about two stable releases per year,
- but hopefully about six snapshots instead of the two betas we have now.
- The intentions is to make testing without CVS access easier.
-</para>
-</sect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="install" ><title>INSTALL</title>
-<para> 
- See the <filename>INSTALL</filename> file in this directory, for installing
- from raw source, and the <citetitle>User Manual</citetitle>, for all other
- installation types. 
-</para>
-</sect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="run"><title>RUN</title>
-<para>
- privoxy [--help] [--version]
- [--no-daemon] [--pidfile PIDFILE] [--user USER[.GROUP]] [--chroot]  [--pre-chroot-nslookup
- HOSTNAME ][config_file]
-</para>
-<para>
- See the man page or <citetitle>User Manual</citetitle> for an explanation of each option, and 
- other configuration and usage issues.
-</para>
-<para>
- If no config_file is specified on the command line, Privoxy will look for a
- file named 'config' in the current directory (except Win32 which will look
- for 'config.txt'). If no config_file is found, Privoxy will fail to start.
-</para>
-<para>
- Or for Red Hat and Fedora based distributions: /etc/rc.d/init.d/privoxy start
-</para>
-<para>
- Or Debian and Ubuntu: /etc/init.d/privoxy start
-</para>
-</sect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="configuration"><title>CONFIGURATION</title>
-<para>
- See: 'config', 'default.action', 'user.action', 'default.filter', and
- 'user.filter'. 'user.action' and 'user.filter' are for personal and local
- configuration preferences. These are all well commented. Most of the magic is
- in '*.action' files. 'user.action' should be used for any actions
- customizations. On Unix-like systems, these files are typically installed in
- /etc/privoxy.  On Windows, then wherever the executable itself is installed.
- There are many significant changes and advances from earlier versions. The
- <citetitle>User Manual</citetitle> has an explanation of all configuration
- options, and examples: http://www.privoxy.org/user-manual/.
-</para>
-<para>
- Be sure to set your browser(s) for HTTP/HTTPS Proxy at &lt;IP&gt;:&lt;Port&gt;, or
- whatever you specify in the config file under 'listen-address'. DEFAULT is
- localhost:8118. Note that Privoxy ONLY proxies HTTP (and HTTPS) traffic. Do not try it 
- with FTP or other protocols for the simple reason it does not work.
-</para>
-<para>
- The actions list can be configured via the web interface accessed via
- http://p.p/, as well other options.
-</para>
-<![%p-not-stable;[
-<para>
- All configuration files are subject to unannounced changes during the
- development process.
-</para>
-]]>
-</sect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="documentation"><title>DOCUMENTATION</title>
-<para>
- There should be documentation in the 'doc' subdirectory<![%p-not-stable;[, but it
- may not be completed at this point]]>. In particular, see the 
- <citetitle>User Manual</citetitle> there,
- the <citetitle>FAQ</citetitle>, and those interested in Privoxy development, should look at
- <citetitle>developer-manual</citetitle>. 
-</para>
-<para>
- <![%p-not-stable;[
- The most up to date source of information on the current development version,
- may still be either comments in the source code, or the included
- configuration files. ]]>The source and configuration files are all well
- commented. The main configuration files are: 'config', 'default.action', and
- 'default.filter'<![%p-not-stable;[ in the top-level source directory]]>. 
-</para>
-
-<para>
- Included documentation may vary according to platform and packager. All 
- documentation is posted on http://www.privoxy.org, in case you don't have it, 
- or can't find it.
-</para>
-</sect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="contact"><title>CONTACTING THE DEVELOPERS, BUG REPORTING AND FEATURE REQUESTS</title>
-<!-- Include contacting.sgml boilerplate: -->
-  &contacting;
-<!-- end boilerplate -->
-</sect1>
-
-<!-- <para> -->
-<!--  <LiteralLayout> -->
-<!--  ------------------------------------------------------------------------- -->
-<!--  ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx -->
-<!-- </LiteralLayout> -->
-<!-- </para> -->
-<!-- <para> -->
-<!--  $Id: readme.sgml,v 2.26 2009/03/21 11:32:38 hal9 Exp $ -->
-<!-- </para> -->
-
-</article>
diff --git a/external/privoxy/doc/source/seealso.sgml b/external/privoxy/doc/source/seealso.sgml
deleted file mode 100644
index 087ebc5..0000000
--- a/external/privoxy/doc/source/seealso.sgml
+++ /dev/null
@@ -1,113 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/seealso.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: seealso.sgml,v 2.12 2009/02/23 10:42:58 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  privoxy-man-page
-  user-manual
-  faq
-  developer-manual
-
- NOTE: 04/05/02, HB Removed &nbsp; tags. They were causing docbook2man 
- to barf.
-
--->
-
-<para>
- Other references and sites of interest to <application>Privoxy</application>
- users:
-</para>
-
-<para>
- <simplelist>
-  <member>
-   <ulink
-   url="http://www.privoxy.org/";>http://www.privoxy.org/</ulink>, 
-   the <application>Privoxy</application> Home page. 
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink
-   url="http://www.privoxy.org/faq/";>http://www.privoxy.org/faq/</ulink>, 
-   the <application>Privoxy</application> FAQ. 
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink
-   url="http://www.privoxy.org/developer-manual/";>http://www.privoxy.org/developer-manual/</ulink>, 
-   the <application>Privoxy</application> developer manual. 
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="https://sourceforge.net/projects/ijbswa/";>https://sourceforge.net/projects/ijbswa/</ulink>, 
-   the Project Page for <application>Privoxy</application> on 
-   <ulink url="http://sourceforge.net";>SourceForge</ulink>.
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>,
-   the web-based user interface. <application>Privoxy</application> must be
-   running for this to work. Shortcut: <ulink url="http://p.p/";>http://p.p/</ulink>
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="https://sourceforge.net/tracker/?group_id=11118&amp;atid=460288";>https://sourceforge.net/tracker/?group_id=11118&amp;atid=460288</ulink>, to submit <quote>misses</quote> and other
-   configuration related suggestions to the developers. 
-  </member>
- </simplelist>
- <![%seealso-extra;[
- <!-- This part only goes into user-manual -->
- <simplelist>
-  <member>
-   <ulink url="http://www.junkbusters.com/ht/en/cookies.html";>http://www.junkbusters.com/ht/en/cookies.html</ulink>,
-   an explanation how cookies are used to track web users.
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="http://www.junkbusters.com/ijb.html";>http://www.junkbusters.com/ijb.html</ulink>,
-   the original Internet Junkbuster.
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="http://www.squid-cache.org/";>http://www.squid-cache.org/</ulink>, a popular
-   caching proxy, which is often used together with <application>Privoxy</application>.
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="http://www.pps.jussieu.fr/~jch/software/polipo/";>http://www.pps.jussieu.fr/~jch/software/polipo/</ulink>,
-   <application>Polipo</application> is a caching proxy with advanced features
-   like pipelining, multiplexing and caching of partial instances. In many setups
-   it can be used as <application>Squid</application> replacement.
-  </member>
- </simplelist>
- <simplelist>
-  <member>
-   <ulink url="https://www.torproject.org/";>https://www.torproject.org/</ulink>, 
-   <application>Tor</application> can help anonymize web browsing, 
-   web publishing, instant messaging, IRC, SSH, and other applications.
-  </member>
- </simplelist>
- ]]>
-</para>
diff --git a/external/privoxy/doc/source/supported.sgml b/external/privoxy/doc/source/supported.sgml
deleted file mode 100644
index 62bfde1..0000000
--- a/external/privoxy/doc/source/supported.sgml
+++ /dev/null
@@ -1,46 +0,0 @@
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/supported.sgml,v $
-
- Purpose     :  Entity included in other project documents.
-                
- $Id: supported.sgml,v 2.9 2008/01/17 01:49:51 hal9 Exp $
-
- Copyright (C) 2001-2008 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ======================================================================
-  This file used for inclusion with other documents only.
- ======================================================================
-
- If you make changes to this file, please verify the finished 
- docs all display as intended.
-
- This file is included into:
-
-  user-manual
-  faq
-  newfeatures
-  announce
-
--->
-<para>
- At present, <application>Privoxy</application> is known to run on
- Windows(95, 98, ME, 2000, XP, Vista), GNU/Linux (RedHat, SuSE, Debian,
- Fedora, Gentoo, Slackware and others), Mac OSX, OS/2, AmigaOS, FreeBSD,
- NetBSD, OpenBSD, Solaris, and various other flavors of Unix.
-</para>
-
-<![%p-supp-userman;[
-<para>
- But any operating system that runs TCP/IP, can conceivably take advantage of
- <application>Privoxy</application> in a networked situation where
- <application>Privoxy</application> would run as a server on a LAN gateway. 
- Then only the <quote>gateway</quote> needs to be running one of the above
- operating systems.
-</para>
-
-<para>
- Source code is freely available, so porting to other operating systems 
- is always a possibility.
-</para>
-]]>
diff --git a/external/privoxy/doc/source/temp/manpage.links b/external/privoxy/doc/source/temp/manpage.links
deleted file mode 100644
index e69de29..0000000
diff --git a/external/privoxy/doc/source/temp/manpage.refs b/external/privoxy/doc/source/temp/manpage.refs
deleted file mode 100644
index 09dd95e..0000000
--- a/external/privoxy/doc/source/temp/manpage.refs
+++ /dev/null
@@ -1,4 +0,0 @@
-{
-  'refentry:PRIVOXY' => 'privoxy(1)',
-  '' => ''
-}
diff --git a/external/privoxy/doc/source/user-manual.sgml b/external/privoxy/doc/source/user-manual.sgml
deleted file mode 100644
index 2999e3e..0000000
--- a/external/privoxy/doc/source/user-manual.sgml
+++ /dev/null
@@ -1,9328 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
-<!entity % dummy "IGNORE"> 
-<!entity supported SYSTEM "supported.sgml">
-<!entity newfeatures SYSTEM "newfeatures.sgml">
-<!entity p-intro SYSTEM "privoxy.sgml">
-<!entity seealso SYSTEM "seealso.sgml">
-<!entity buildsource SYSTEM "buildsource.sgml">
-<!entity contacting SYSTEM "contacting.sgml">
-<!entity history SYSTEM "history.sgml">
-<!entity copyright SYSTEM "copyright.sgml">
-<!entity license SYSTEM "license.sgml">
-<!entity p-authors SYSTEM "p-authors.sgml">
-<!entity config SYSTEM "p-config.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-authors-formal "INCLUDE"> <!-- include additional text, etc  -->
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity % p-text "IGNORE">        <!-- define we are not a text only doc -->
-<!entity % p-doc "INCLUDE">        <!-- and we are a formal doc           -->
-<!entity % p-readme "IGNORE">
-<!entity % user-man "IGNORE">
-<!entity % config-file "IGNORE">
-<!entity % p-supp-userman "IGNORE"> <!-- Omit some from supported.sgml    -->
-<!entity  my-copy "&copy;">         <!-- kludge for docbook2man           -->
-<!entity % draft "IGNORE">          <!-- WIP stuff    -->
-<!entity % seealso-extra "INCLUDE"> <!-- extra stuff from seealso.sgml    -->
-<!entity  my-app "<application>Privoxy</application>">
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/user-manual.sgml,v $
-
- Purpose     :  user manual
-                This file belongs into
-                ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-
- $Id: user-manual.sgml,v 2.103 2009/03/21 10:49:05 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation.
- ========================================================================
-
--->
-
-<article id="index">
-<artheader>
-
-<title>Privoxy &p-version; User Manual</title>
-
-<pubdate>
- <subscript>
-<!-- Completely the wrong markup, but very little is allowed  -->
-<!-- in this part of an article. FIXME -->
- <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by 
- <ulink url="http://www.privoxy.org/";>Privoxy Developers</ulink>
- </subscript>
-</pubdate>
-
-<pubdate>$Id: user-manual.sgml,v 2.103 2009/03/21 10:49:05 fabiankeil Exp $</pubdate>
-
-<!--
-
-Note: the following should generate a separate page, and a live link to it,
-all nicely done. But it doesn't for some mysterious reason. Please leave
-commented unless it can be fixed proper. For the time being, the
-copyright/license declarations will be in their own sgml.
-
-Hal.
-
-
--->
-
-
-<abstract>
-
-<![%dummy;[
- <para>
- <comment>
-  This is here to keep vim syntax file from breaking :/
-  If I knew enough to fix it, I would.
-  PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
- </comment>
- </para>
-]]>
-
- <para>
-  The <citetitle>Privoxy User Manual</citetitle> gives users information on how to
-  install, configure and use <ulink
-  url="http://www.privoxy.org/";>Privoxy</ulink>.
- </para>
-
-<!-- Include privoxy.sgml boilerplate: -->
- &p-intro;
-<!-- end privoxy.sgml -->
-
- <para>
-  You can find the latest version of the <citetitle>Privoxy User Manual</citetitle> at  <ulink
-  url="http://www.privoxy.org/user-manual/";>http://www.privoxy.org/user-manual/</ulink>.
-  Please see the <link linkend="contact">Contact section</link> on how to
-  contact the developers.
- </para>
-
-<!--   <para> -->
-<!--    Feel free to send a note to the developers at <email>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</email>. -->
-<!--   </para> -->
-</abstract>
-
-</artheader>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 label="1" id="introduction"><title>Introduction</title>
-<para>
- This documentation is included with the current &p-status; version of
- <application>Privoxy</application>, v.&p-version;<![%p-not-stable;[, 
- and is mostly complete at this point. The most up to date reference for the
- time being is still the comments in the source files and in the individual
- configuration files. Development of a new version is currently nearing
- completion, and includes significant changes and enhancements over
- earlier versions. ]]>.
-</para>
-
-<!-- include only in non-stable versions -->
-<![%p-not-stable;[
-<para>
- Since this is a &p-status; version, not all new features are well tested. This
- documentation may be slightly out of sync as a result (especially with 
- CVS sources). And there <emphasis>may be</emphasis> bugs, though hopefully
- not many! 
-</para>
-]]>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="features"><title>Features</title>
-<para>
- In addition to the core 
- features of ad blocking and 
- <ulink url="http://en.wikipedia.org/wiki/Browser_cookie";>cookie</ulink> management,
- <application>Privoxy</application> provides many supplemental
- features<![%p-not-stable;[, some of them currently under development]]>, 
- that give the end-user more control, more privacy and more freedom:
-</para>
-<!-- Include newfeatures.sgml boilerplate here: -->
- &newfeatures;
-<!-- end boilerplate -->
-</sect2>
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="installation"><title>Installation</title>
-
-<para>
- <application>Privoxy</application> is available both in convenient pre-compiled
- packages for a wide range of operating systems, and as raw source code.
- For most users, we recommend using the packages, which can be downloaded from our
- <ulink url="http://sourceforge.net/projects/ijbswa/";>Privoxy Project
- Page</ulink>.
-</para>
-
-<para>
- Note: 
- On some platforms, the installer may remove previously installed versions, if 
- found. (See below for your platform). In any case <emphasis>be sure to backup
- your old configuration if it is valuable to you.</emphasis> See the <link
- linkend="upgradersnote">note to upgraders</link> section below.
-</para>
-
-<!--   ~~~~~       New section      ~~~~~     --> 
-<sect2 id="installation-packages"><title>Binary Packages</title>
-<para>
-How to install the binary packages depends on your operating system:
-</para>
-
-<!-- XXX: The installation sections should be sorted -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-pack-rpm"><title>Red Hat and Fedora RPMs</title>
-
-<para>
- RPMs can be installed with <literal>rpm -Uvh privoxy-&p-version;-1.rpm</literal>,
- and will use <filename>/etc/privoxy</filename> for the location 
- of configuration files.
-</para>
-
-<para>
- Note that on Red Hat, <application>Privoxy</application> will
- <emphasis>not</emphasis> be automatically started on system boot. You will
- need to enable that using <command>chkconfig</command>,
- <command>ntsysv</command>, or similar methods. 
-</para>
-
-<para>
- If you have problems with failed dependencies, try rebuilding the SRC RPM: 
- <literal>rpm --rebuild privoxy-&p-version;-1.src.rpm</literal>. This 
- will use your locally installed libraries and RPM version. 
-</para>
-
-<para>
- Also note that if you have a <application>Junkbuster</application> RPM installed
- on your system, you need to remove it first, because the packages conflict.
- Otherwise, RPM will try to remove <application>Junkbuster</application>
- automatically if found, before installing <application>Privoxy</application>.
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-deb"><title>Debian and Ubuntu</title>
-<para>
- DEBs can be installed with <literal>apt-get install privoxy</literal>,
- and will use <filename>/etc/privoxy</filename> for the location of 
- configuration files.
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-pack-win"><title>Windows</title>
-
-<para>
- Just double-click the installer, which will guide you through
- the installation process. You will find the configuration files
- in the same directory as you installed <application>Privoxy</application> in. 
-</para>
-<para>
- Version 3.0.5 beta introduced full <application>Windows</application> service
- functionality. On Windows only, the <application>Privoxy</application>
- program has two new command line arguments to install and uninstall
- <application>Privoxy</application> as a <emphasis>service</emphasis>.
-</para>
- <variablelist>
-  <varlistentry>
-   <term>Arguments:</term>
-   <listitem>
-    <para>
-     <replaceable class="parameter">--install</replaceable>[:<replaceable class="parameter">service_name</replaceable>]
-    </para>
-    <para>
-     <replaceable class="parameter">--uninstall</replaceable>[:<replaceable class="parameter">service_name</replaceable>]
-    </para>
-   </listitem>
-  </varlistentry>
- </variablelist>
- <para>
- After invoking <application>Privoxy</application> with
- <command>--install</command>, you will need to bring up the
- <application>Windows</application> service console to assign the user you
- want <application>Privoxy</application> to run under, and whether or not you
- want it to run whenever the system starts. You can start the
- <application>Windows</application> services console with the following
- command: <command>services.msc</command>.  If you do not take the manual step
- of modifying <application>Privoxy's</application> service settings, it will
- not start.  Note too that you will need to give Privoxy a user account that
- actually exists, or it will not be permitted to 
- write to its log and configuration files.
-</para>
-
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-pack-bintgz"><title>Solaris <!--, NetBSD, HP-UX--></title>
-
-<para>
- Create a new directory, <literal>cd</literal> to it, then unzip and
- untar the archive. For the most part, you'll have to figure out where
- things go. <!-- FIXME, more info needed? -->
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-os2"><title>OS/2</title>
-
-<para>
- First, make sure that no previous installations of
- <application>Junkbuster</application> and / or 
- <application>Privoxy</application> are left on your
- system. Check that no <application>Junkbuster</application>
- or <application>Privoxy</application> objects are in
- your startup folder.
-
-</para>
-
-<para>
- Then, just double-click the WarpIN self-installing archive, which will
- guide you through the installation process. A shadow of the
- <application>Privoxy</application> executable will be placed in your
- startup folder so it will start automatically whenever OS/2 starts.
-</para>
-
-<para>
- The directory you choose to install <application>Privoxy</application>
- into will contain all of the configuration files.
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-mac"><title>Mac OS X</title>
-<para>
- Unzip the downloaded file (you can either double-click on the zip file
- icon from the Finder, or from the desktop if you downloaded it there).
- Then, double-click on the package installer icon and follow the
- installation process.
-</para>
-<para>
- The privoxy service will automatically start after a successful
- installation (in addition to every time your computer starts up).  To
- prevent the privoxy service from automatically starting when your
- computer starts up, remove or rename the folder named
- <literal>/Library/StartupItems/Privoxy</literal>. 
-</para>
-<para>
- To manually start or stop the privoxy service, use the Privoxy Utility
- for Mac OS X.  This application controls the privoxy service (e.g.
- starting and stopping the service as well as uninstalling the software).
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-amiga"><title>AmigaOS</title>
-<para>
- Copy and then unpack the <filename>lha</filename> archive to a suitable location. 
- All necessary files will be installed into <application>Privoxy</application>
- directory, including all configuration and log files. To uninstall, just 
- remove this directory.
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installation-tbz"><title>FreeBSD</title>
-
-<para>
- Privoxy is part of FreeBSD's Ports Collection, you can build and install
- it with <literal>cd /usr/ports/www/privoxy; make install clean</literal>.
-</para>
-<para>
- If you don't use the ports, you can fetch and install
- the package with <literal>pkg_add -r privoxy</literal>.
-</para>
-<para>
- The port skeleton and the package can also be downloaded from the
- <ulink url="https://sourceforge.net/project/showfiles.php?group_id=11118";>File Release
- Page</ulink>, but there's no reason to use them unless you're interested in the
- beta releases which are only available there.
-</para>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="installattion-gentoo"><title>Gentoo</title>
-<para>
- Gentoo source packages (Ebuilds) for <application>Privoxy</application> are 
- contained in the Gentoo  Portage Tree (they are not on the download page, 
- but there is a Gentoo section, where you can see when a new 
- <application>Privoxy</application> Version is added to the  Portage Tree).
-</para>
-<para>
- Before installing <application>Privoxy</application> under Gentoo just do 
- first <literal>emerge --sync</literal> to get the latest changes from the 
- Portage tree. With <literal>emerge privoxy</literal> you install the latest 
- version.
-</para>
-<para>
- Configuration files are in <filename>/etc/privoxy</filename>, the 
- documentation is in <filename>/usr/share/doc/privoxy-&p-version;</filename>
- and the Log directory is in <filename>/var/log/privoxy</filename>.
-</para>
-</sect3>
-
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="installation-source"><title>Building from Source</title>
-
-<para>
- The most convenient way to obtain the <application>Privoxy</application> sources
- is to download the source tarball from our 
- <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118&amp;package_id=10571";>project download
- page</ulink>.
-</para>
-
-<para>
- If you like to live on the bleeding edge and are not afraid of using
- possibly unstable development versions, you can check out the up-to-the-minute
- version directly from <ulink url="http://sourceforge.net/cvs/?group_id=11118";>the
- CVS repository</ulink>. 
-<!-- 
- deprecated...out of business.
- or simply download <ulink
- url="http://cvs.sourceforge.net/cvstarballs/ijbswa-cvsroot.tar.bz2";>the nightly CVS
- tarball.</ulink>
--->
-</para>
-
-<!-- include buildsource.sgml boilerplate: -->
-&buildsource;
-<!-- end boilerplate -->
-
-</sect2>
-<!--   ~~~~~       New section      ~~~~~     --> 
-<sect2 id="installation-keepupdated"><title>Keeping your Installation Up-to-Date</title>
-<para>
- As user feedback comes in and development continues, we will make updated versions
- of both the main <link linkend="actions-file">actions file</link> (as a <ulink
- url="http://sourceforge.net/project/showfiles.php?group_id=11118&amp;release_id=103670";>separate
- package</ulink>) and the software itself (including the actions file) available for
- download.
-</para>
-
-<para>
- If you wish to receive an email notification whenever we release updates of
- <application>Privoxy</application> or the actions file, <ulink
- url="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/";>subscribe
- to our announce  mailing list</ulink>, ijbswa-announce@xxxxxxxxxxxxxxxxxxxxxx
-</para>
-
-<para>
- In order not to lose your personal changes and adjustments when updating
- to the latest <literal>default.action</literal> file we <emphasis>strongly
- recommend</emphasis> that you use <literal>user.action</literal> and 
- <literal>user.filter</literal> for your local
- customizations of <application>Privoxy</application>. See the <link
- linkend="actions-file">Chapter on actions files</link> for details.
-</para>
-
-</sect2>
-
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="whatsnew">
-<title>What's New in this Release</title>
-<para>
- <application>Privoxy 3.0.12</application> is mainly a bugfix release:
-</para>
-
-<para>
- <itemizedlist>
-  <listitem>
-   <para>
-    The socket-timeout option now also works on platforms whose
-    select() implementation modifies the timeout structure.
-    Previously the timeout was triggered even if the connection
-    didn't stall. Reported by cyberpatrol.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The Connection: keep-alive code properly deals with files
-    larger than 2GB. Previously the connection was closed too
-    early.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The content length for files above 2GB is logged correctly.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The user-manual directive on the show-status page links to
-    the documentation location specified with the directive,
-    not to the Privoxy website.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    When running in daemon mode, Privoxy doesn't log anything
-    to the console unless there are errors before the logfile
-    has been opened.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The show-status page prints warnings about invalid directives
-    on the same line as the directives themselves.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    Fixed several justified (but harmless) compiler warnings,
-    mostly on 64 bit platforms.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The mingw32 version explicitly requests the default charset
-    to prevent display problems with some fonts available on more
-    recent Windows versions. Patch by Burberry.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The mingw32 version uses the Privoxy icon in the alt-tab
-    windows. Patch by Burberry.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    The timestamp and the thread id is omitted in the "Fatal error"
-    message box on mingw32.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    Fixed two related mingw32-only buffer overflows. Triggering
-    them required control over the configuration file, therefore
-    this isn't seen as a security issue.
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    In verbose mode, or if the new option --show-skipped-tests
-    is used, Privoxy-Regression-Test logs skipped tests and the
-    skip reason.
-   </para>
-  </listitem>
- </itemizedlist>
-</para>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="upgradersnote">
-<title>Note to Upgraders</title>
-
-<para>
- A quick list of things to be aware of before upgrading from earlier 
- versions of <application>Privoxy</application>:
-</para>
-
-<para>
- <itemizedlist>
-
- <listitem>
-  <para>
-   The recommended way to upgrade &my-app; is to backup your old 
-   configuration files, install the new ones, verify that &my-app;
-   is working correctly and finally merge back your changes using
-   <application>diff</application> and maybe <application>patch</application>.
-  </para>
-  <para>
-   There are a number of new features in each &my-app; release and
-   most of them have to be explicitly enabled in the configuration
-   files. Old configuration files obviously don't do that and due
-   to syntax changes using old configuration files with a new
-   &my-app; isn't always possible anyway.
-  </para>
- </listitem>
- <listitem>
-  <para>  
-    Note that some installers remove earlier versions completely,
-    including configuration files, therefore you should really save
-    any important configuration files!
-  </para>
- </listitem>
- <listitem>
-  <para>  
-   On the other hand, other installers don't overwrite existing configuration 
-   files, thinking you will want to do that yourself.
-  </para>
- </listitem>
- <listitem>
-  <para>  
-   <filename>standard.action</filename> has been merged into
-   the <filename>default.action</filename> file.
-  </para>
- </listitem>
- <listitem>
-  <para>
-   In the default configuration only fatal errors are logged now.
-   You can change that in the <link linkend="DEBUG">debug section</link>
-   of the configuration file. You may also want to enable more verbose
-   logging until you verified that the new &my-app; version is working
-   as expected.
-  </para>
- </listitem>
-
- <listitem>
-    <para>
-     Three other config file settings are now off by default: 
-     <link linkend="enable-remote-toggle">enable-remote-toggle</link>,
-     <link linkend="enable-remote-http-toggle">enable-remote-http-toggle</link>,
-     and  <link linkend="enable-edit-actions">enable-edit-actions</link>. 
-     If you use or want these, you will need to explicitly enable them, and
-     be aware of the security issues involved. 
-    </para>
-  </listitem>
-
-<!--
- <listitem>
-  <para>  
-   What constitutes a <quote>default</quote> configuration has changed, 
-   and you may want to review which actions are <quote>on</quote> by 
-   default. This is primarily a matter of emphasis, but some features 
-   you may have been used to, may now be <quote>off</quote> by default.
-   There are also a number of new actions and filters you may want to
-   consider, most of which are not fully incorporated into the default
-   settings as yet (see above).
-  </para>
- </listitem>
--->
-<!--
-  <listitem>
-   <para>
-    The default actions setting is now <literal>Cautious</literal>. Previous
-    releases had a default setting of <literal>Medium</literal>. Experienced
-    users may want to adjust this, as it is fairly conservative by &my-app;
-    standards and past practices. See <ulink
-    url="http://config.privoxy.org/edit-actions-list?f=default";>
-    http://config.privoxy.org/edit-actions-list?f=default</ulink>. New users
-    should try the default settings for a while before turning up the volume.
-   </para>
-  </listitem>
-
-  <listitem>
-   <para>
-    The default setting has filtering turned <emphasis>off</emphasis>, which
-    subsequently means that compression is <emphasis>on</emphasis>. Remember
-    that filtering does not work on compressed pages, so if you use, or want to
-    use, filtering, you will need to force compression off. Example:
-   </para>
-   <para>
- <screen>
-  { +<link linkend="filter">filter</link>{google}  +<link linkend="prevent-compression">prevent-compression</link> }
-   .google.</screen>
-   </para>
-   <para>
-    Or if you use a number of filters, or filter many sites, you may just want
-    to turn off compression for all sites in
-    <filename>default.action</filename> (or
-    <filename>user.action</filename>). 
-   </para>
-
-  </listitem>
-
-  <listitem>
-  <para>
-   Also, <link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> is 
-   off by default now. If you've liked this feature in the past, you may want 
-   to turn it back on in <filename>user.action</filename> now.
-  </para>
-  </listitem>
-
-
-  <listitem>
-  <para>
-   Some installers may not automatically start
-   <application>Privoxy</application> after installation.
-  </para>
- </listitem> 
--->
-
- </itemizedlist>
-</para>
-
-</sect2>
-</sect1>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="quickstart"><title>Quickstart to Using Privoxy</title>
-<para>
- <itemizedlist>
-
- <listitem>
-  <para>
-  Install <application>Privoxy</application>. See the <link
-  linkend="installation">Installation Section</link> below for platform specific
-  information. 
- </para>
- </listitem>  
-
- <listitem>
-  <para>
-   Advanced users and those who want to offer <application>Privoxy</application>
-   service to more than just their local machine should check the <link
-   linkend="config">main config file</link>, especially the <link
-   linkend="access-control">security-relevant</link> options. These are 
-   off by default.
-  </para>
- </listitem>  
-
- <listitem>
-  <para>
-  Start <application>Privoxy</application>, if the installation program has
-  not done this already (may vary according to platform). See the section
-  <link linkend="startup">Starting <application>Privoxy</application></link>.
-  </para>
- </listitem>
-
- <listitem>
-  <para>
-   Set your browser to use <application>Privoxy</application> as HTTP and
-   HTTPS (SSL)  <ulink url="http://en.wikipedia.org/wiki/Proxy_server";>proxy</ulink>
-   by setting the proxy configuration for address of
-   <literal>127.0.0.1</literal> and port <literal>8118</literal>.
-   <emphasis>DO NOT</emphasis> activate proxying for <literal>FTP</literal> or 
-   any protocols besides HTTP and HTTPS (SSL) unless you intend to prevent your
-   browser from using these protocols.
-  </para>
- </listitem>  
-
- <listitem>
-  <para>
-    Flush your browser's disk and memory caches, to remove any cached ad images.
-    If using <application>Privoxy</application> to manage 
-    <ulink url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink>,
-    you should remove any currently stored cookies too.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   A default installation should provide a reasonable starting point for 
-   most. There will undoubtedly be occasions where you will want to adjust the
-   configuration, but that can be dealt with as the need arises. Little 
-   to no initial configuration is required in most cases, you may want
-   to enable the
-   <ulink url="config.html#ENABLE-EDIT-ACTIONS">web-based action editor</ulink> though.
-   Be sure to read the warnings first.
-  </para>
-  <para>
-   See the <link linkend="configuration">Configuration section</link> for more
-   configuration options, and how to customize your installation.
-   You might also want to look at the <link
-   linkend="quickstart-ad-blocking">next section</link> for a quick
-   introduction to how <application>Privoxy</application> blocks ads and
-   banners.
-</para>
- </listitem> 
-
- <listitem>
-  <para>
-    If you experience ads that slip through, innocent images that are
-    blocked, or otherwise feel the need to fine-tune
-    <application>Privoxy's</application> behavior, take a look at the <link
-    linkend="actions-file">actions files</link>. As a quick start, you might
-    find the <link linkend="act-examples">richly commented examples</link>
-    helpful. You can also view and edit the actions files through the <ulink
-    url="http://config.privoxy.org";>web-based user interface</ulink>. The
-    Appendix <quote><link linkend="actionsanat">Troubleshooting: Anatomy of an
-    Action</link></quote> has hints on how to understand and debug actions that
-    <quote>misbehave</quote>.
-  </para>
- </listitem> 
-
-<!--
- Did anyone test these lately?
- fk 2007-11-10
- <listitem>
-  <para>
-   For easy access to &my-app;'s most important controls, drag the provided
-   <link linkend="bookmarklets">Bookmarklets</link> into your browser's
-   personal toolbar.
-  </para>
- </listitem> 
--->
-
- <listitem>
-  <para>
-   Please see the section <link linkend="contact">Contacting the
-   Developers</link> on how to report bugs, problems with websites or to get
-   help. 
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   Now enjoy surfing with enhanced control, comfort and privacy!
-  </para>
- </listitem> 
-
- </itemizedlist>
-</para>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="quickstart-ad-blocking">
-<title>Quickstart to Ad Blocking</title>
-<!--
- NOTE:  This section is deliberately redundant for those that don't 
- want to read the whole thing (which is getting lengthy).
--->
-<para>
- Ad blocking is but one of <application>Privoxy's</application>
- array of features. Many of these features are for the technically minded advanced 
- user. But, ad and banner blocking is surely common ground for everybody.
-</para>
-<para> 
- This section will provide a quick summary of ad blocking so 
- you can get up to speed quickly without having to read the more extensive
- information provided below, though this is highly recommended.
-</para>
-<para>
- First a bit of a warning ... blocking ads is much like blocking SPAM: the
- more aggressive you are about it, the more likely you are to block 
- things that were not intended. And the more likely that some things 
- may not work as intended. So there is a trade off here. If you want
- extreme ad free browsing, be prepared to deal with more
- <quote>problem</quote> sites, and to spend more time adjusting the
- configuration to solve these unintended consequences. In short, there is 
- not an easy way to eliminate <emphasis>all</emphasis> ads. Either take 
- the easy way and settle for <emphasis>most</emphasis> ads blocked with the
- default configuration, or jump in and tweak it for your personal surfing
- habits and preferences.
-</para>
-<para>
- Secondly, a brief explanation of <application>Privoxy's </application>
- <quote>actions</quote>. <quote>Actions</quote> in this context, are 
- the directives we use to tell <application>Privoxy</application> to perform
- some task relating to HTTP transactions (i.e. web browsing). We tell
- <application>Privoxy</application> to take some <quote>action</quote>. Each
- action has a unique name and function. While there are many potential
- <application>actions</application> in <application>Privoxy's</application>
- arsenal, only a few are used for ad blocking. <link
- linkend="actions">Actions</link>, and <link linkend="actions-file">action
- configuration files</link>, are explained in depth below.
-</para>
-<para>
- Actions are specified in <application>Privoxy's</application> configuration,
- followed by one or more URLs to which the action should apply. URLs 
- can actually be URL type <link linkend="af-patterns">patterns</link> that use
- wildcards so they can apply potentially to a range of similar URLs. The
- actions, together with the URL patterns are called a section.
-</para>
-<para>
- When you connect to a website, the full URL will either match one or more
- of the sections as defined in <application>Privoxy's</application> configuration,
- or not. If so, then <application>Privoxy</application> will perform the
- respective actions. If not, then nothing special happens. Furthermore, web
- pages may contain embedded, secondary URLs that your web browser will
- use to load additional components of the page, as it parses the
- original page's HTML content. An ad image for instance, is just an URL
- embedded in the page somewhere. The image itself may be on the same server,
- or a server somewhere else on the Internet. Complex web pages will have many
- such embedded URLs. &my-app; can deal with each URL individually, so, for
- instance, the main page text is not touched, but images from such-and-such
- server are blocked.
-</para>
-
-<para>
- The most important actions for basic ad blocking are:  <literal><link
- linkend="block">block</link></literal>, <literal><link
- linkend="handle-as-image">handle-as-image</link></literal>, 
- <literal><link
- linkend="handle-as-empty-document">handle-as-empty-document</link></literal>,and
- <literal><link linkend="set-image-blocker">set-image-blocker</link></literal>:
-</para>
-
-<para>
- <itemizedlist>
-  
- <listitem>
-  <para>
-   <literal><link linkend="block">block</link></literal> - this is perhaps 
-   the single most used action, and is particularly important for ad blocking.
-   This action stops any contact between your browser and any URL patterns
-   that match this action's configuration. It can be used for blocking ads,
-   but also anything that is determined to be unwanted. By itself, it simply
-   stops any communication with the remote server and sends
-   <application>Privoxy</application>'s own built-in BLOCKED page instead to
-   let you now what has happened (with some exceptions, see below).
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   <literal><link linkend="handle-as-image">handle-as-image</link></literal> - 
-   tells <application>Privoxy</application> to treat this URL as an image.
-   <application>Privoxy</application>'s default configuration already does this
-   for all common image types (e.g. GIF), but there are many situations where this
-   is not so easy to determine. So we'll force it in these cases. This is particularly
-   important for ad blocking, since  only if we know that it's an image of
-   some kind, can we replace it with an image of our choosing, instead of the 
-   <application>Privoxy</application> BLOCKED page (which would only result in
-   a <quote>broken image</quote> icon). There are some limitations to this
-   though. For instance, you can't just brute-force an image substitution for
-   an entire HTML page in most situations.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   <literal><link linkend="handle-as-empty-document">handle-as-empty-document</link></literal> - 
-   sends an empty document instead of <application>Privoxy's</application> 
-   normal BLOCKED HTML page. This is useful for file types that are neither 
-   HTML nor images, such as blocking JavaScript files.
-  </para>
- </listitem> 
-
- <listitem>
-  <para>
-   <literal><link
-   linkend="set-image-blocker">set-image-blocker</link></literal> - tells
-   <application>Privoxy</application> what to display in place of an ad image that
-   has hit a block rule. For this to come into play, the URL must match a
-   <literal><link linkend="block">block</link></literal> action somewhere in the
-   configuration, <emphasis>and</emphasis>, it must also match an
-   <literal><link linkend="handle-as-image">handle-as-image</link></literal> action.
-  </para>
-  <para>
-   The configuration options on what to display instead of the ad are:
-  </para>
-  <simplelist>
-   <member>
-    &nbsp;&nbsp;&nbsp;<emphasis>pattern</emphasis> - a checkerboard pattern, so that an ad 
-    replacement is obvious. This is the default.
-   </member>
-  </simplelist>
-  <simplelist>
-   <member>
-    &nbsp;&nbsp;&nbsp;<emphasis>blank</emphasis> - A very small empty GIF image is displayed.
-    This is the so-called <quote>invisible</quote> configuration option.
-   </member>
-  </simplelist>
-  <simplelist>
-   <member>
-    &nbsp;&nbsp;&nbsp;<emphasis>http://&lt;URL&gt;</emphasis> - A redirect to any image anywhere
-    of the user's choosing (advanced usage).
-   </member>
-  </simplelist>
-  </listitem> 
-
-</itemizedlist>
-</para>
-
-<para>
- Advanced users will eventually want to explore &my-app;
- <literal><link linkend="filter">filters</link></literal> as well. Filters 
- are very different from <literal><link
- linkend="block">blocks</link></literal>.
- A <quote>block</quote> blocks a site, page, or unwanted contented. Filters
- are a way of filtering or modifying what is actually on the page. An example
- filter usage: a text replacement of <quote>no-no</quote> for
- <quote>nasty-word</quote>. That is a very simple example. This process can be
- used for ad blocking, but it is more in the realm of advanced usage and has
- some pitfalls to be wary off.
-</para>
-
-<para>
- The quickest way to adjust any of these settings is with your browser through
- the special <application>Privoxy</application> editor at <ulink
- url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>
- (shortcut: <ulink url="http://p.p/";>http://p.p/show-status</ulink>). This 
- is an internal page, and does not require Internet access.
-</para>
-
-<para>
- Note that as of <application>Privoxy</application> 3.0.7 beta the
- action editor is disabled by default. Check the
- <ulink url="config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions
-  section in the configuration file</ulink> to learn why and in which
- cases it's safe to enable again.
-</para>
-
-<para>
- If you decided to enable the action editor, select the appropriate
- <quote>actions</quote> file, and click
- <quote><guibutton>Edit</guibutton></quote>. It is best to put personal or
- local preferences in <filename>user.action</filename> since this is not
- meant to be overwritten during upgrades, and will over-ride the settings in
- other files. Here you can insert new <quote>actions</quote>, and URLs for ad
- blocking or other purposes, and make other adjustments to the configuration.
- <application>Privoxy</application> will detect these changes automatically.
-</para>
-
-<para>
- A quick and simple step by step example:
-</para>
-
-<para>
- <itemizedlist>
-
-  <listitem>
-   <para>
-     Right click on the ad image to be blocked, then select 
-     <quote><guimenuitem>Copy Link Location</guimenuitem></quote> from the
-     pop-up menu. 
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    Set your browser to 
-    <ulink
- url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    Find <filename>user.action</filename> in the top section, and click 
-    on <quote><guibutton>Edit</guibutton></quote>:
-   </para>
-
- <!-- image of editor and actions files selections -->
- <para>
-  <figure pgwide="0" float="0"><title>Actions Files in Use</title>
-   <mediaobject>
-     <imageobject>
-      <imagedata  fileref="files-in-use.jpg" format="jpg">
-       </imageobject> 
-       <textobject>
-        <phrase>[ Screenshot of Actions Files in Use ]</phrase>
-      </textobject>
-   </mediaobject>
-  </figure>
- </para>
- </listitem> 
- 
- <listitem>
-  <para>
-   You should have a section with only
-   <literal><link linkend="block">block</link></literal> listed under 
-   <quote>Actions:</quote>.
-   If not, click a <quote><guibutton>Insert new section below</guibutton></quote>
-   button, and in the new section that just appeared, click the 
-   <guibutton>Edit</guibutton> button right under the word <quote>Actions:</quote>.
-   This will bring up a list of all actions. Find
-   <literal><link linkend="block">block</link></literal> near the top, and click
-   in the <quote>Enabled</quote> column, then <quote><guibutton>Submit</guibutton></quote>
-   just below the list.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   Now, in the <literal><link linkend="block">block</link></literal> actions section,
-   click the <quote><guibutton>Add</guibutton></quote> button, and paste the URL the
-   browser got from <quote><guimenuitem>Copy Link Location</guimenuitem></quote>.
-   Remove the <literal>http://</literal> at the beginning of the URL. Then, click
-   <quote><guibutton>Submit</guibutton></quote> (or
-   <quote><guibutton>OK</guibutton></quote> if in a pop-up window).
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   Now go back to the original page, and press <keycap>SHIFT-Reload</keycap>
-   (or flush all browser caches). The image should be gone now.
-  </para>
- </listitem> 
- 
- </itemizedlist>
-</para>
-
-<para>
- This is a very crude and simple example. There might be good reasons to use a 
- wildcard pattern match to include potentially similar images from the same
- site. For a more extensive explanation of <quote>patterns</quote>, and 
- the entire actions concept, see <link linkend="actions-file">the Actions
- section</link>.
-</para>
-
-<para>
- For advanced users who want to hand edit their config files, you might want
- to now go to the <link linkend="act-examples">Actions Files Tutorial</link>.
- The ideas explained therein also apply to the web-based editor.
-</para>
-<para>
- There are also various 
- <link linkend="filter">filters</link> that can be used for ad blocking 
- (filters are a special subset of actions). These 
- fall into the <quote>advanced</quote> usage category, and are explained in
- depth in later sections. 
-</para>
-
-</sect2>
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="startup">
-<title>Starting Privoxy</title>
-<para>
- Before launching <application>Privoxy</application> for the first time, you
- will want to configure your browser(s) to use
- <application>Privoxy</application> as a HTTP and HTTPS (SSL) 
- <ulink url="http://en.wikipedia.org/wiki/Proxy_server";>proxy</ulink>. The default is
- 127.0.0.1 (or localhost) for the proxy address, and port 8118 (earlier versions
- used port 8000). This is the one configuration step <emphasis>that must be done
-</emphasis>!
-</para>
-<para>
- Please note that <application>Privoxy</application> can only proxy HTTP and 
- HTTPS traffic. It will not work with FTP or other protocols.
-</para>
-
- <!-- image of Mozilla Proxy configuration -->
- <para>
-  <figure pgwide="0" float="0"><title>Proxy Configuration Showing
-  Mozilla/Netscape HTTP and HTTPS (SSL) Settings</title>
-   <mediaobject>
-     <imageobject>
-      <imagedata  fileref="proxy_setup.jpg" format="jpg">
-       </imageobject> 
-       <textobject>
-        <phrase>[ Screenshot of Mozilla Proxy Configuration ]</phrase>
-      </textobject>
-   </mediaobject>
-  </figure>
- </para>
- 
-
-<para> 
- With <application>Firefox</application>, this is typically set under:
-</para>
- 
-<literallayout>
- <guibutton>Tools</guibutton> -> <guibutton>Options</guibutton> ->  <guibutton>Advanced</guibutton> -> <guibutton>Network</guibutton> -><guibutton>Connection</guibutton> -> <guibutton>Settings</guibutton>
-
-</literallayout>
-
-<para> 
- Or optionally on some platforms:
-</para>
- 
-<literallayout>
- <guibutton>Edit</guibutton> -> <guibutton>Preferences</guibutton> -> <guibutton>General</guibutton> -> <guibutton>Connection Settings</guibutton> -> <guibutton>Manual Proxy Configuration</guibutton>
-
-</literallayout>
-
-
-<para> 
- With <application>Netscape</application> (and
- <application>Mozilla</application>), this can be set under:
-</para>
-
-
-<literallayout>
-<!-- Mix ascii and gui art, something for everybody -->
-<!-- spacing on this is tricky -->
- <guibutton>Edit</guibutton> -> <guibutton>Preferences</guibutton> -> <guibutton>Advanced</guibutton> -> <guibutton>Proxies</guibutton> -> <guibutton>HTTP Proxy</guibutton>
-
-</literallayout>
-
-<para>
- For <application>Internet Explorer v.5-7</application>: 
-</para>
-
-<literallayout>
- <guibutton>Tools</guibutton> -> <guibutton>Internet Options</guibutton> -> <guibutton>Connections</guibutton> -> <guibutton>LAN Settings</guibutton>
-</literallayout>
-
-<para>
- Then, check <quote>Use Proxy</quote> and fill in the appropriate info
- (Address: 127.0.0.1, Port: 8118). Include HTTPS (SSL), if you want HTTPS
- proxy support too (sometimes labeled <quote>Secure</quote>). Make sure any
- checkboxes like <quote>Use the same proxy server for all protocols</quote> is
- <emphasis>UNCHECKED</emphasis>. You want only HTTP and HTTPS (SSL)!
-</para>
-
- <!-- image of IE Proxy configuration -->
- <para>
-  <figure pgwide="0" float="0"><title>Proxy Configuration Showing
-  Internet Explorer HTTP and HTTPS (Secure) Settings</title>
-   <mediaobject>
-     <imageobject>
-      <imagedata  fileref="proxy2.jpg" format="jpg">
-       </imageobject> 
-       <textobject>
-        <phrase>[ Screenshot of IE Proxy Configuration ]</phrase>
-      </textobject>
-   </mediaobject>
-  </figure>
- </para>
-
-
-<para>
- After doing this, flush your browser's disk and memory caches to force a
- re-reading of all pages and to get rid of any ads that may be cached. Remove 
- any <ulink url="http://en.wikipedia.org/wiki/Browser_cookie";>cookies</ulink>,
- if you want <application>Privoxy</application> to manage that. You are now
- ready to start enjoying the benefits of using
- <application>Privoxy</application>!
-</para>
-
-<para>
- <application>Privoxy</application> itself is typically started by specifying the
- main configuration file to be used on the command line. If no configuration
- file is specified on the command line, <application>Privoxy</application>
- will look for a file named <filename>config</filename> in the current
- directory. Except on Win32 where it will try <filename>config.txt</filename>.
-</para>
-
-<sect2 id="start-redhat">
-<title>Red Hat and Fedora</title>
-<para>
- A default Red Hat installation may not start &my-app; upon boot. It will use
- the file <filename>/etc/privoxy/config</filename> as its main configuration
- file.
-</para>
-<para>
- <screen>
- # /etc/rc.d/init.d/privoxy start
-</screen>
-</para>
-<para>
- Or ...
-</para>
-<para>
- <screen>
- # service privoxy start
-</screen>
-</para>
-</sect2>
-
-<sect2 id="start-debian">
-<title>Debian</title>
-<para>
- We use a script. Note that Debian typically starts &my-app; upon booting per
- default.  It will use the file
- <filename>/etc/privoxy/config</filename> as its main configuration
- file.
-</para>
-<para>
- <screen>
- # /etc/init.d/privoxy start
-</screen>
-</para>
-</sect2>
-
-<sect2 id="start-windows">
-<title>Windows</title>
-<para>
-Click on the &my-app; Icon to start <application>Privoxy</application>. If no configuration file is
- specified on the command line, <application>Privoxy</application> will look
- for a file named <filename>config.txt</filename>. Note that Windows will
- automatically start &my-app; when the system starts if you chose that option
- when installing.
-</para>
-<para>
- <application>Privoxy</application> can run with full Windows service functionality.
- On Windows only, the &my-app; program has two new command line arguments
- to install and uninstall &my-app; as a service. See the 
- <link linkend="installation-pack-win">Windows Installation
- instructions</link> for details.
-</para>
-</sect2>
-
-<sect2 id="start-unices">
-<title>Solaris, NetBSD, FreeBSD, HP-UX and others</title>
-<para>
-Example Unix startup command:
-</para>
-<para>
- <screen>
- # /usr/sbin/privoxy /etc/privoxy/config
-</screen>
-</para>
-</sect2>
-
-<sect2 id="start-os2">
-<title>OS/2</title>
-<para>
- During installation, <application>Privoxy</application> is configured to
- start automatically when the system restarts. You can start it manually by
- double-clicking on the <application>Privoxy</application> icon in the
- <application>Privoxy</application> folder.
-</para>
-</sect2>
-
-<sect2 id="start-macosx">
-<title>Mac OS X</title>
-<para>
-  After downloading the privoxy software, unzip the downloaded file by
-  double-clicking on the zip file icon.  Then, double-click on the
-  installer package icon and follow the installation process.
-</para>
-<para>
-  The privoxy service will automatically start after a successful
-  installation.  In addition, the privoxy service will automatically
-  start every time your computer starts up.
-</para>
-<para>
-  To prevent the privoxy service from automatically starting when your
-  computer starts up, remove or rename the folder named
-  /Library/StartupItems/Privoxy.
-</para>
-<para>
-  A simple application named Privoxy Utility has been created which
-  enables administrators to easily start and stop the privoxy service.
-</para>
-<para>
-  In addition, the Privoxy Utility presents a simple way for
-  administrators to edit the various privoxy config files.  A method
-  to uninstall the software is also available.
-</para>
-<para>
-  An administrator username and password must be supplied in order for
-  the Privoxy Utility to perform any of the tasks.
-</para>
-</sect2>
-
-
-<sect2 id="start-amigaos">
-<title>AmigaOS</title>
-<para>
- Start <application>Privoxy</application> (with RUN &lt;&gt;NIL:) in your
- <filename>startnet</filename> script (AmiTCP), in
- <filename>s:user-startup</filename> (RoadShow), as startup program in your
- startup script (Genesis), or as startup action (Miami and MiamiDx). 
- <application>Privoxy</application> will automatically quit when you quit your
- TCP/IP stack (just ignore the harmless warning your TCP/IP stack may display that
- <application>Privoxy</application> is still running).
-</para>
-</sect2>
-
-<sect2 id="start-gentoo">
-<title>Gentoo</title>
-<para>
- A script is again used. It will use the file <filename>/etc/privoxy/config 
- </filename> as its main configuration file.
-</para>
-<para>
- <screen>
- /etc/init.d/privoxy start
- </screen>
-</para>
-<para>
- Note that <application>Privoxy</application> is not automatically started at 
- boot time by default. You can change this with the <literal>rc-update</literal> 
- command.
-</para>
-<para> 
- <screen>
- rc-update add privoxy default
- </screen>
-</para>
-</sect2>
-
-<!--
-
-<para>
- See the section <link linkend="cmdoptions">Command line options</link> for
- further info.
-</para>
-
-must find a better place for this paragraph
-
-<para>
- The included default configuration files should give a reasonable starting
- point. Most of the per site configuration is done in the
- <ulink url="actions-file.html"><quote>actions</quote></ulink> files. These are
- where various cookie actions are defined, ad and banner blocking, and other
- aspects of <application>Privoxy</application> configuration. There are several
- such files included, with varying levels of aggressiveness. 
-</para>
-
-<para>
- You will probably want to keep an eye out for sites for which you may prefer
- persistent cookies, and add these to your actions configuration as needed. By
- default, most of these will be accepted only during the current browser
- session (aka <quote>session cookies</quote>), unless you add them to the
- configuration. If you want the browser to handle this instead, you will need
- to edit <filename>user.action</filename> (or through the web based interface)
- and disable this feature. If you use more than one browser, it would make
- more sense to let <application>Privoxy</application> handle this. In which
- case, the browser(s) should be set to accept all cookies.
-</para>
-
-<para>
- Another feature where you will probably want to define exceptions for trusted
- sites is the popup-killing (through  <ulink
- url="actions-file.html#FILTER-POPUPS"><quote>+filter{popups}</quote></ulink>),
- because your favorite shopping, banking, or leisure site may need
- popups (explained below). 
-</para>
-
-<para>
- <application>Privoxy</application> does not support all of the optional HTTP/1.1
- features yet. In the unlikely event that you experience inexplicable problems
- with browsers that use HTTP/1.1 per default
- (like <application>Mozilla</application> or recent versions of I.E.), you might
- try to force HTTP/1.0 compatibility. For Mozilla, look under <literal>Edit -&gt;
- Preferences -&gt; Debug -&gt; Networking</literal>.
- Alternatively, set the <quote>+downgrade-http-version</quote> config option in
- <filename>default.action</filename> which will downgrade your browser's HTTP
- requests from HTTP/1.1 to HTTP/1.0 before processing them.
-</para>
-
-<para>
- After running <application>Privoxy</application> for a while, you can 
- start to fine tune the configuration to suit your personal, or site, 
- preferences and requirements. There are many, many aspects that can 
- be customized. <quote>Actions</quote> 
- can be adjusted by pointing your browser to 
- <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>
- (shortcut: <ulink url="http://p.p/";>http://p.p/</ulink>), 
- and then follow the link to <quote>View &#38; Change the Current Configuration</quote>. 
- (This is an internal page and does not require Internet access.)
-</para>
-
-<para>
- In fact, various aspects of <application>Privoxy</application>
- configuration can be viewed from this page, including 
- current configuration parameters, source code version numbers, 
- the browser's request headers, and <quote>actions</quote> that apply 
- to a given URL. In addition to the actions file 
- editor mentioned above, <application>Privoxy</application> can also 
- be turned <quote>on</quote> and <quote>off</quote> (toggled) from this page.
-</para>
-
-<para>
- If you encounter problems, try loading the page without
- <application>Privoxy</application>. If that helps, enter the URL where
- you have the problems into <ulink url="http://p.p/show-url-info";>the browser
- based rule tracing utility</ulink>. See which rules apply and why, and
- then try turning them off for that site one after the other, until the problem
- is gone. When you have found the culprit, you might want to turn the rest on
- again.
-</para>
-
-<para>
- If the above paragraph sounds gibberish to you, you might want to <link
- linkend="actions-file">read more about the actions concept</link>
- or even dive deep into the <link linkend="actionsanat">Appendix
- on actions</link>.
-</para>
-
-<para>
- If you can't get rid of the problem at all, think you've found a bug in
- Privoxy, want to propose a new feature or smarter rules, please see the 
- section <link linkend="contact"><quote>Contacting the
- Developers</quote></link> below. 
-</para>
-
--->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="cmdoptions">
-<title>Command Line Options</title>
-<para>
- <application>Privoxy</application> may be invoked with the following
- command-line options:
-</para>
-
-<para>
- <itemizedlist>
-
- <listitem>
-  <para>
-    <emphasis>--version</emphasis>
-  </para>
-  <para>
-     Print version info and exit. Unix only.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-    <emphasis>--help</emphasis>
-  </para>
-  <para>
-   Print short usage info and exit. Unix only.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   <emphasis>--no-daemon</emphasis>
-  </para>
-  <para>
-   Don't become a daemon, i.e. don't fork and become process group
-   leader, and don't detach from controlling tty. Unix only.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   <emphasis>--pidfile FILE</emphasis>
-  </para>
-  <para>
-   On startup, write the process ID to <emphasis>FILE</emphasis>. Delete the
-   <emphasis>FILE</emphasis> on exit. Failure to create or delete the
-   <emphasis>FILE</emphasis> is non-fatal. If no <emphasis>FILE</emphasis>
-   option is given, no PID file will be used. Unix only.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   <emphasis>--user USER[.GROUP]</emphasis>
-  </para>
-  <para>
-   After (optionally) writing the PID file, assume the user  ID  of
-   <emphasis>USER</emphasis>, and if included the GID of GROUP.  Exit if the
-   privileges are not sufficient to do so. Unix only.
-  </para>
- </listitem>
- <listitem>
-  <para>
-   <emphasis>--chroot</emphasis>
-  </para>
-  <para>
-   Before changing to the user ID given in the <emphasis>--user</emphasis> option, 
-   chroot to that user's home directory, i.e. make the kernel pretend to the &my-app;
-   process that the directory tree starts there. If set up carefully, this can limit 
-   the impact of possible vulnerabilities in &my-app; to the files contained in that hierarchy.
-   Unix only.
-  </para>
- </listitem>
- <listitem>
-  <para>
-   <emphasis>--pre-chroot-nslookup hostname</emphasis>
-  </para>
-  <para>
-   Specifies a hostname to look up before doing a chroot. On some systems, initializing the
-   resolver library involves reading config files from /etc and/or loading additional shared
-   libraries from /lib. On these systems, doing a hostname lookup before the chroot reduces
-   the number of files that must be copied into the chroot tree.
-  </para>
-  <para>
-   For fastest startup speed, a good value is a hostname that is not in /etc/hosts but that
-   your local name server (listed in /etc/resolv.conf) can resolve without recursion
-   (that is, without having to ask any other name servers). The hostname need not exist,
-   but if it doesn't, an error message (which can be ignored) will be output.
-  </para>
- </listitem>
-
- <listitem>
-  <para>
-    <emphasis>configfile</emphasis>
-  </para>
-  <para>
-    If no <emphasis>configfile</emphasis> is included on the command line, 
-    <application>Privoxy</application> will look for a file named 
-    <quote>config</quote> in the current directory (except on Win32 
-    where it will look for <quote>config.txt</quote> instead). Specify 
-    full path to avoid confusion. If no config file is found, 
-    <application>Privoxy</application> will fail to start.
-  </para>
- </listitem> 
-
- </itemizedlist>
-</para>
-
-<para>
- On <application>MS Windows</application> only there are two additional 
- command-line options to allow <application>Privoxy</application> to install and 
- run as a <emphasis>service</emphasis>. See the 
-<link linkend="installation-pack-win">Window Installation section</link> 
-for details.
-</para>
-
-</sect2>
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="configuration"><title>Privoxy Configuration</title>
- <para>
-  All <application>Privoxy</application> configuration is stored  
-  in text files. These files can be edited with a text editor.
-  Many important aspects of <application>Privoxy</application> can 
-  also be controlled easily with a web browser.
- </para>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2>
-<title>Controlling Privoxy with Your Web Browser</title>
-<para>
- <application>Privoxy</application>'s user interface can be reached through the special 
- URL <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>
- (shortcut: <ulink url="http://p.p/";>http://p.p/</ulink>), 
- which is a built-in page and works without Internet access.
- You will see the following section:
-
-</para>
-
-<!-- Needs to be put in a table and colorized  -->
-<screen>
- <msgtext>
- <bridgehead renderas="sect2">&nbsp;&nbsp;&nbsp;&nbsp;Privoxy Menu</bridgehead>
-
- <simplelist>
- <member>
-  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&squf;&nbsp;&nbsp;<ulink url="http://config.privoxy.org/show-status";>View & change the current configuration</ulink>
- </member>
- <member>
-  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&squf;&nbsp;&nbsp;<ulink url="http://config.privoxy.org/show-version";>View the source code version numbers</ulink>
- </member>
- <member>
-  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&squf;&nbsp;&nbsp;<ulink url="http://config.privoxy.org/show-request";>View the request headers.</ulink>
- </member>
- <member>
-  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&squf;&nbsp;&nbsp;<ulink url="http://config.privoxy.org/show-url-info";>Look up which actions apply to a URL and why</ulink>
- </member>
- <member>
-  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&squf;&nbsp;&nbsp;<ulink url="http://config.privoxy.org/toggle";>Toggle Privoxy on or off</ulink>
- </member>
- <member>
-  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&squf;&nbsp;&nbsp;<ulink
-  url="http://www.privoxy.org/&p-version;/user-manual/";>Documentation</ulink>
- </member>
- </simplelist>
- </msgtext>
-</screen>
-
-
-<para>
- This should be self-explanatory. Note the first item leads to an editor for the
- <link linkend="actions-file">actions files</link>, which is where the ad, banner,
- cookie, and URL blocking magic is configured as well as other advanced features of
- <application>Privoxy</application>. This is an easy way to adjust various
- aspects of <application>Privoxy</application> configuration. The actions
- file, and other configuration files, are explained in detail below. 
-</para>
-
-<para>
- <quote>Toggle Privoxy On or Off</quote> is handy for sites that might 
- have problems with your current actions and filters. You can in fact use
- it as a test to see whether it is <application>Privoxy</application> 
- causing the problem or not. <application>Privoxy</application> continues 
- to run as a proxy in this case, but all manipulation is disabled, i.e.
- <application>Privoxy</application> acts like a normal forwarding proxy. There
- is even a toggle <link linkend="bookmarklets">Bookmarklet</link> offered, so
- that you can toggle <application>Privoxy</application> with one click from
- your browser.
-</para>
-
-<para>
- Note that several of the features described above are disabled by default
- in <application>Privoxy</application> 3.0.7 beta and later.
- Check the
- <ulink url="config.html">configuration file</ulink> to learn why
- and in which cases it's safe to enable them again.
-</para>
-
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="confoverview">
-<title>Configuration Files Overview</title>
-<para>
- For Unix, *BSD and Linux, all configuration files are located in
- <filename>/etc/privoxy/</filename> by default. For MS Windows, OS/2, and
- AmigaOS these are all in the same directory as the 
- <application>Privoxy</application> executable. <![%p-not-stable;[ The name
- and number of configuration files has changed from previous versions, and is
- subject to change as development progresses.]]>
-</para>
-
-<para>
- The installed defaults provide a reasonable starting point, though 
- some settings may be aggressive by some standards. For the time being, the
- principle configuration files are:
-</para>
-
-<para>
- <itemizedlist>
-
-  <listitem>
-   <para>
-     The <link linkend="config">main configuration file</link> is named <filename>config</filename>
-     on Linux, Unix, BSD, OS/2, and AmigaOS and <filename>config.txt</filename>
-     on Windows. This is a required file.
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    <filename>match-all.action</filename> is used to define which <quote>actions</quote>
-    relating to banner-blocking, images, pop-ups, content modification, cookie handling
-    etc should be applied by default. It should be the first actions file loaded.
-   </para>
-   <para>
-    <filename>default.action</filename> defines many exceptions (both positive and negative)
-    from the default set of actions that's configured in <filename>match-all.action</filename>.
-    It should be the second actions file loaded and shouldn't be edited by the user.
-   </para>
-   <para>
-    Multiple actions files may be defined in <filename>config</filename>. These 
-    are processed in the order they are defined. Local customizations and locally 
-    preferred exceptions to the default policies as defined in
-    <filename>match-all.action</filename> (which you will most probably want
-    to define sooner or later) are best applied in <filename>user.action</filename>,
-    where you can preserve them across upgrades. The file isn't installed by all
-    installers, but you can easily create it yourself with a text editor.
-   </para>
-   <para>    
-    There is also a web based editor that can be accessed from
-    <ulink
-    url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>
-    (Shortcut: <ulink
-    url="http://p.p/show-status";>http://p.p/show-status</ulink>) for the
-    various actions files. 
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    <quote>Filter files</quote> (the <link linkend="filter-file">filter
-    file</link>) can be used to re-write the raw page content, including
-    viewable text as well as embedded HTML and JavaScript, and whatever else
-    lurks on any given web page. The filtering jobs are only pre-defined here;
-    whether to apply them or not is up to the actions files. 
-    <filename>default.filter</filename> includes various filters made 
-    available for use by the developers. Some are much more intrusive than 
-    others, and all should be used with caution. You may define additional 
-    filter files in <filename>config</filename> as you can with 
-    actions files. We suggest <filename>user.filter</filename> for any 
-    locally defined filters or customizations.
-   </para>
-  </listitem> 
-
- </itemizedlist>
-</para>
-
-<para>
- The syntax of the configuration and filter files may change between different
- Privoxy versions, unfortunately some enhancements cost backwards compatibility.
- <!-- Add link to documentation-->
-</para>
-
-<para>
- All files use the <quote><literal>#</literal></quote> character to denote a
- comment (the rest of the line will be ignored) and understand line continuation
- through placing a backslash ("<literal>\</literal>") as the very last character
- in a line. If the <literal>#</literal> is preceded by a backslash, it looses
- its special function. Placing a <literal>#</literal> in front of an otherwise
- valid configuration line to prevent it from being interpreted is called "commenting
- out" that line. Blank lines are ignored.
-</para>
-
-<para>
- The actions files and filter files  
- can use Perl style <link linkend="regex">regular expressions</link> for
- maximum flexibility. 
-</para>
-
-<para>
- After making any changes, there is no need to restart
- <application>Privoxy</application> in order for the changes to take
- effect. <application>Privoxy</application> detects such changes 
- automatically. Note, however, that it may take one or two additional
- requests for the change to take effect. When changing the listening address
- of <application>Privoxy</application>, these <quote>wake up</quote> requests
- must obviously be sent to the <emphasis>old</emphasis> listening address.
-</para>
-
-<![%p-not-stable;[
-<para>
- While under development, the configuration content is subject to change. 
- The below documentation may not be accurate by the time you read this. 
- Also, what constitutes a <quote>default</quote> setting, may change, so 
- please check all your configuration files on important issues.
-</para>
-]]>
-
-</sect2>
-</sect1>
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~~~~       New section Header    ~~~~~~~~~     -->
-
-<!-- **************************************************** -->
-<!-- Include config.sgml here -->
-<!-- This is where the entire config file is detailed. -->
- &config;
-<!-- end include  -->
-
-
-<!--  ~  End section  ~  -->
-
-
-
-<!--   ~~~~~~~~       New section Header    ~~~~~~~~~     -->
-
-<sect1 id="actions-file"><title>Actions Files</title>
-
-
-<!--
-  XXX: similar descriptions are in the Configuration Files sections.
-  We should only describe them at one place.
--->
-<para>
- The actions files are used to define what <emphasis>actions</emphasis>
- <application>Privoxy</application> takes for which URLs, and thus determines
- how ad images, cookies and various other aspects of HTTP content and
- transactions are handled, and on which sites (or even parts thereof). 
- There are a number of such actions, with a wide range of functionality.
- Each action does something a little different.
- These actions give us a veritable arsenal of tools with which to exert 
- our control, preferences and independence. Actions can be combined so that 
- their effects are aggregated when applied against a given set of URLs.
-</para> 
-<para>
- There 
- are three action files included with <application>Privoxy</application> with
- differing purposes:
-</para>
-<para>
- <itemizedlist>
-  <listitem>
-   <para>
-    <filename>match-all.action</filename> - is used to define which
-    <quote>actions</quote> relating to banner-blocking, images, pop-ups,
-    content modification, cookie handling etc should be applied by default.
-    It should be the first actions file loaded
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    <filename>default.action</filename> - defines many exceptions (both
-    positive and negative) from the default set of actions that's configured
-    in <filename>match-all.action</filename>. It is a set of rules that should
-    work reasonably well as-is for most users. This file is only supposed to
-    be edited by the developers. It should be the second actions file loaded.
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    <filename>user.action</filename> - is intended to be for local site 
-    preferences and exceptions. As an example, if your ISP or your bank
-    has specific requirements, and need special handling, this kind of 
-    thing should go here. This file will not be upgraded.
-   </para>
-  </listitem> 
-  <listitem>
-   <para>
-    <guibutton>Edit</guibutton>  <guibutton>Set to Cautious</guibutton> <guibutton>Set to Medium</guibutton>  <guibutton>Set to Advanced</guibutton>
-   </para>
-   <para>
-    These have increasing levels of aggressiveness <emphasis>and have no
-    influence on your browsing unless you select them explicitly in the
-    editor</emphasis>. A default installation should be pre-set to 
-    <literal>Cautious</literal>. New users should try this for a while before
-    adjusting the settings to more aggressive levels. The more aggressive 
-    the settings, then the more likelihood there is of problems such as sites 
-    not working as they should.
-   </para>
-   <para>
-    The <guibutton>Edit</guibutton> button allows you to turn each 
-    action on/off individually for fine-tuning. The <guibutton>Cautious</guibutton>
-    button changes the actions list to low/safe settings which will activate 
-    ad blocking and a minimal set of &my-app;'s features, and subsequently
-    there will be less of a chance for accidental problems. The
-    <guibutton>Medium</guibutton> button sets the list to a medium level of
-    other features and a low level set of privacy features. The
-    <guibutton>Advanced</guibutton> button sets the list to a high level of
-    ad blocking and medium level of privacy. See the chart below. The latter
-    three buttons over-ride any changes via with the
-    <guibutton>Edit</guibutton> button. More fine-tuning can be done in the
-    lower sections of this internal page.
-   </para>
-   <para>
-    While the actions file editor allows to enable these settings in all
-    actions files, they are only supposed to be enabled in the first one
-    to make sure you don't unintentionally overrule earlier rules.
-   </para>
-   <para>
-    The default profiles, and their associated actions, as pre-defined in
-    <filename>default.action</filename> are:
-   </para>
-   <para>
-    <table frame=all><title>Default Configurations</title>
-    <tgroup cols=4 align=left colsep=1 rowsep=1>
-    <colspec colname=c1>
-    <colspec colname=c2>
-    <colspec colname=c3>
-    <colspec colname=c4>
-    <thead>
-    <row>
-      <entry>Feature</entry>
-      <entry>Cautious</entry>
-      <entry>Medium</entry>
-      <entry>Advanced</entry>
-    </row>
-    </thead>
-    <!--  <tfoot> -->
-    <!--  <row> -->
-    <!--    <entry>f1</entry> -->
-    <!--    <entry>f2</entry> -->
-    <!--    <entry>f3</entry> -->
-    <!--    <entry>f4</entry> -->
-    <!--  </row> -->
-    <!--  </tfoot> -->
-    <tbody>
-
-    <row>
-      <entry>Ad-blocking Aggressiveness</entry>
-      <entry>medium</entry>
-      <entry>high</entry>
-      <entry>high</entry>
-    </row>
-
-    <row>
-      <entry>Ad-filtering by size</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>Ad-filtering by link</entry>
-      <entry>no</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-    </row>
-    <row>
-      <entry>Pop-up killing</entry>
-      <entry>blocks only</entry>
-      <entry>blocks only</entry>
-      <entry>blocks only</entry>
-    </row>
-    
-    <row>
-      <entry>Privacy Features</entry>
-      <entry>low</entry>
-      <entry>medium</entry>
-      <entry>medium/high</entry>
-    </row>
-
-    <row>
-      <entry>Cookie handling</entry>
-      <entry>none</entry>
-      <entry>session-only</entry>
-      <entry>kill</entry>
-    </row>
-
-    <row>
-      <entry>Referer forging</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>GIF de-animation</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>Fast redirects</entry>
-      <entry>no</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>HTML taming</entry>
-      <entry>no</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>JavaScript taming</entry>
-      <entry>no</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>Web-bug killing</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-      <entry>yes</entry>
-    </row>
-
-    <row>
-      <entry>Image tag reordering</entry>
-      <entry>no</entry>
-      <entry>yes</entry>
-      <entry>yes</entry>
-    </row>
-
-    </tbody>
-    </tgroup>
-    </table>
-    </para>
-
-  </listitem> 
- </itemizedlist>
-</para> 
-
-<para>
- The list of actions files to be used are defined in the main configuration 
- file, and are processed in the order they are defined (e.g.
- <filename>default.action</filename> is typically processed before
- <filename>user.action</filename>). The content of these can all be viewed and
- edited from <ulink
- url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>.
- The over-riding principle when applying actions, is that the last action that
- matches a given URL wins. The broadest, most general rules go first
- (defined in <filename>default.action</filename>),
- followed by any exceptions (typically also in
- <filename>default.action</filename>), which are then followed lastly by any
- local preferences (typically in <emphasis>user</emphasis><filename>.action</filename>). 
- Generally, <filename>user.action</filename> has the last word.
- </para>
-
-<para>
- An actions file typically has multiple sections. If you want to use
- <quote>aliases</quote> in an actions file, you have to place the (optional)
- <link linkend="aliases">alias section</link> at the top of that file.
- Then comes the default set of rules which will apply universally to all
- sites and pages (be <emphasis>very careful</emphasis> with using such a
- universal set in <filename>user.action</filename> or any other actions file after 
- <filename>default.action</filename>, because it will override the result
- from consulting any previous file). And then below that,
- exceptions to the defined universal policies. You can regard
- <filename>user.action</filename> as an appendix to <filename>default.action</filename>,
- with the advantage that it is a separate file, which makes preserving your
- personal settings across <application>Privoxy</application> upgrades easier.
-</para>
-
-<para> 
- Actions can be used to block anything you want, including ads, banners, or
- just some obnoxious URL whose content you would rather not see. Cookies can be accepted
- or rejected, or accepted only during the current browser session (i.e. not
- written to disk), content can be modified, some JavaScripts tamed, user-tracking
- fooled, and much more. See below for a <link linkend="actions">complete list
- of actions</link>.
-</para>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2>
-<title>Finding the Right Mix</title>
-<para>
- Note that some <link linkend="actions">actions</link>, like cookie suppression
- or script disabling, may render some sites unusable that rely on these
- techniques to work properly. Finding the right mix of actions is not always easy and
- certainly a matter of personal taste. And, things can always change, requiring 
- refinements in the configuration. In general, it can be said that the more
- <quote>aggressive</quote> your default settings (in the top section of the
- actions file) are, the more exceptions for <quote>trusted</quote> sites you
- will have to make later. If, for example, you want to crunch all cookies per
- default, you'll have to make exceptions from that rule for sites that you
- regularly use and that require cookies for actually useful purposes, like maybe
- your bank, favorite shop, or newspaper.
-</para>
-
-<para>
- We have tried to provide you with reasonable rules to start from in the
- distribution actions files. But there is no general rule of thumb on these
- things. There just are too many variables, and sites are constantly changing.
- Sooner or later you will want to change the rules (and read this chapter again :).
-</para>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2>
-<title>How to Edit</title>
-<para>
- The easiest way to edit the actions files is with a browser by
- using our browser-based editor, which can be reached from <ulink
- url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>.
- Note: the config file option <link
- linkend="enable-edit-actions">enable-edit-actions</link> must be enabled for
- this to work. The editor allows both fine-grained control over every single
- feature on a per-URL basis, and easy choosing from wholesale sets of defaults
- like <quote>Cautious</quote>, <quote>Medium</quote> or
- <quote>Advanced</quote>. Warning: the <quote>Advanced</quote> setting is more
- aggressive, and will be more likely to cause problems for some sites.
- Experienced users only! 
- </para>
-
-<para>
- If you prefer plain text editing to GUIs, you can of course also directly edit the
- the actions files with your favorite text editor. Look at
- <filename>default.action</filename> which is richly commented with many 
- good examples.
-</para>
-</sect2>
-
-
-<sect2 id="actions-apply">
-<title>How Actions are Applied to Requests</title>
-<para>
- Actions files are divided into sections. There are special sections,
- like the <quote><link linkend="aliases">alias</link></quote> sections which will
- be discussed later. For now let's concentrate on regular sections: They have a
- heading line (often split up to multiple lines for readability) which consist
- of a list of actions, separated by whitespace and enclosed in curly braces.
- Below that, there is a list of URL and tag patterns, each on a separate line.
-</para>
-
-<para>
- To determine which actions apply to a request, the URL of the request is
- compared to all URL patterns in each <quote>action file</quote>.
- Every time it matches, the list of applicable actions for the request is
- incrementally updated, using the heading of the section in which the
- pattern is located. The same is done again for tags and tag patterns later on.
-</para>
-
-<para>
- If multiple applying sections set the same action differently,
- the last match wins. If not, the effects are aggregated.
- E.g. a URL might match a regular section with a heading line of <literal>{ 
- +<link linkend="handle-as-image">handle-as-image</link> }</literal>,
- then later another one with just <literal>{
- +<link linkend="block">block</link> }</literal>, resulting
- in <emphasis>both</emphasis> actions to apply. And there may well be 
- cases where you will want to combine actions together. Such a section then 
- might look like:
-</para>
-
- <para>
- <screen>
-  { +<literal>handle-as-image</literal>  +<literal>block{Banner ads.}</literal> }
-  # Block these as if they were images. Send no block page.
-   banners.example.com
-   media.example.com/.*banners
-   .example.com/images/ads/</screen>
- </para>
-
-<para>
- You can trace this process for URL patterns and any given URL by visiting <ulink
- url="http://config.privoxy.org/show-url-info";>http://config.privoxy.org/show-url-info</ulink>.
-</para>
-
-<para>
- Examples and more detail on this is provided in the Appendix, <link linkend="ACTIONSANAT">
- Troubleshooting: Anatomy of an Action</link> section.
-</para>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="af-patterns">
-<title>Patterns</title>
-<para> 
- As mentioned, <application>Privoxy</application> uses <quote>patterns</quote>
- to determine what <emphasis>actions</emphasis> might apply to which sites and
- pages your browser attempts to access. These <quote>patterns</quote> use wild
- card type <emphasis>pattern</emphasis> matching to achieve a high degree of
- flexibility. This allows one expression to be expanded and potentially match
- against many similar patterns.
-</para>
- 
-<para>
- Generally, an URL pattern has the form
- <literal>&lt;domain&gt;/&lt;path&gt;</literal>, where both the
- <literal>&lt;domain&gt;</literal> and <literal>&lt;path&gt;</literal> are
- optional. (This is why the special <literal>/</literal> pattern matches all
- URLs). Note that the protocol portion of the URL pattern (e.g.
- <literal>http://</literal>) should <emphasis>not</emphasis> be included in
- the pattern. This is assumed already!
-</para>
-<para>
- The pattern matching syntax is different for the domain and path parts of
- the URL. The domain part uses a simple globbing type matching technique, 
- while the path part uses more flexible 
- <ulink url="http://en.wikipedia.org/wiki/Regular_expressions";><quote>Regular
-  Expressions</quote></ulink> (POSIX 1003.2).
-</para>
-
-<variablelist>
- <varlistentry>
-  <term><literal>www.example.com/</literal></term>
-  <listitem>
-   <para>
-    is a domain-only pattern and will match any request to <literal>www.example.com</literal>,
-    regardless of which document on that server is requested. So ALL pages in
-    this domain would be covered by the scope of this action. Note that a 
-    simple <literal>example.com</literal> is different and would NOT match.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>www.example.com</literal></term>
-  <listitem>
-   <para>
-    means exactly the same. For domain-only patterns, the trailing <literal>/</literal> may
-    be omitted.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>www.example.com/index.html</literal></term>
-  <listitem>
-   <para>
-    matches all the documents on <literal>www.example.com</literal>
-    whose name starts with <literal>/index.html</literal>.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>www.example.com/index.html$</literal></term>
-  <listitem>
-   <para>
-    matches only the single document <literal>/index.html</literal>
-    on <literal>www.example.com</literal>.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>/index.html$</literal></term>
-  <listitem>
-   <para>
-    matches the document <literal>/index.html</literal>, regardless of the domain,
-    i.e. on <emphasis>any</emphasis> web server anywhere.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>index.html</literal></term>
-  <listitem>
-   <para>
-    matches nothing, since it would be interpreted as a domain name and
-    there is no top-level domain called <literal>.html</literal>. So its 
-    a mistake.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3><title>The Domain Pattern</title>
-
-<para>
- The matching of the domain part offers some flexible options: if the
- domain starts or ends with a dot, it becomes unanchored at that end. 
- For example:
-</para>
-
-<variablelist>
- <varlistentry>
-  <term><literal>.example.com</literal></term>
-  <listitem>
-   <para>
-    matches any domain with first-level domain <literal>com</literal>
-    and second-level domain <literal>example</literal>.
-    For example <literal>www.example.com</literal>,
-    <literal>example.com</literal> and <literal>foo.bar.baz.example.com</literal>.
-    Note that it wouldn't match if the second-level domain was <literal>another-example</literal>.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>www.</literal></term>
-  <listitem>
-   <para>
-    matches any domain that <emphasis>STARTS</emphasis> with
-    <literal>www.</literal> (It also matches the domain
-    <literal>www</literal> but most of the time that doesn't matter.)
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>.example.</literal></term>
-  <listitem>
-   <para>
-    matches any domain that <emphasis>CONTAINS</emphasis> <literal>.example.</literal>.
-    And, by the way, also included would be any files or documents that exist
-    within that domain since no path limitations are specified. (Correctly
-    speaking: It matches any FQDN that contains <literal>example</literal> as
-    a domain.) This might be <literal>www.example.com</literal>,
-    <literal>news.example.de</literal>, or
-    <literal>www.example.net/cgi/testing.pl</literal> for instance. All these
-    cases are matched. 
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<para>
- Additionally, there are wild-cards that you can use in the domain names
- themselves. These work similarly to shell globbing type wild-cards:
- <quote>*</quote> represents zero or more arbitrary characters (this is
- equivalent to the 
- <ulink url="http://en.wikipedia.org/wiki/Regular_expressions";><quote>Regular
- Expression</quote></ulink> based syntax of <quote>.*</quote>),
- <quote>?</quote>  represents any single character (this is equivalent to the
- regular expression syntax of a simple <quote>.</quote>), and you can define
- <quote>character classes</quote> in square brackets which is similar to 
- the same regular expression technique. All of this can be freely mixed:
-</para>
-
-<variablelist>
- <varlistentry>
-  <term><literal>ad*.example.com</literal></term>
-  <listitem>
-   <para>
-    matches <quote>adserver.example.com</quote>, 
-    <quote>ads.example.com</quote>, etc but not <quote>sfads.example.com</quote>
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>*ad*.example.com</literal></term>
-  <listitem>
-   <para>
-    matches all of the above, and then some.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>.?pix.com</literal></term>
-  <listitem>
-   <para>
-    matches <literal>www.ipix.com</literal>,
-    <literal>pictures.epix.com</literal>, <literal>a.b.c.d.e.upix.com</literal> etc. 
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>www[1-9a-ez].example.c*</literal></term>
-  <listitem>
-   <para>
-     matches <literal>www1.example.com</literal>, 
-     <literal>www4.example.cc</literal>, <literal>wwwd.example.cy</literal>, 
-     <literal>wwwz.example.com</literal> etc., but <emphasis>not</emphasis> 
-     <literal>wwww.example.com</literal>.
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-
-<para>
- While flexible, this is not the sophistication of full regular expression based syntax.
-</para>
-
-</sect3>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3><title>The Path Pattern</title>
-
-<para>
- <application>Privoxy</application> uses <quote>modern</quote> POSIX 1003.2
-  <ulink url="http://en.wikipedia.org/wiki/Regular_expressions";><quote>Regular
-  Expressions</quote></ulink> for matching the path portion (after the slash),
-  and is thus more flexible.
-</para>
-
-<para>
- There is an <link linkend="regex">Appendix</link> with a brief quick-start into regular
- expressions, you also might want to have a look at your operating system's documentation
- on regular expressions (try <literal>man re_format</literal>).
-</para>
-
-<para>
- Note that the path pattern is automatically left-anchored at the <quote>/</quote>,
- i.e. it matches as if it would start with a <quote>^</quote> (regular expression speak 
- for the beginning of a line).
-</para>
-
-<para>
- Please also note that matching in the path is <emphasis>CASE INSENSITIVE</emphasis>
- by default, but you can switch to case sensitive at any point in the pattern by using the 
- <quote>(?-i)</quote> switch: <literal>www.example.com/(?-i)PaTtErN.*</literal> will match
- only documents whose path starts with <literal>PaTtErN</literal> in
- <emphasis>exactly</emphasis> this capitalization.
-</para>
-
-<variablelist>
- <varlistentry>
-  <term><literal>.example.com/.*</literal></term>
-  <listitem>
-   <para>
-     Is equivalent to just <quote>.example.com</quote>, since any documents 
-     within that domain are matched with or without the <quote>.*</quote>
-     regular expression. This is redundant
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>.example.com/.*/index.html$</literal></term>
-  <listitem>
-   <para>
-    Will match any page in the domain of <quote>example.com</quote> that is
-    named <quote>index.html</quote>, and that is part of some path. For
-    example, it matches <quote>www.example.com/testing/index.html</quote> but
-    NOT <quote>www.example.com/index.html</quote> because the regular
-    expression called for at least two <quote>/'s</quote>, thus the path 
-    requirement. It also would match 
-    <quote>www.example.com/testing/index_html</quote>, because of the 
-    special meta-character <quote>.</quote>.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>.example.com/(.*/)?index\.html$</literal></term>
-  <listitem>
-   <para>
-    This regular expression is conditional so it will match any page 
-    named <quote>index.html</quote> regardless of path which in this case can 
-    have one or more <quote>/'s</quote>. And this one must contain exactly 
-    <quote>.html</quote> (but does not have to end with that!).
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>.example.com/(.*/)(ads|banners?|junk)</literal></term>
-  <listitem>
-   <para>
-    This regular expression will match any path of <quote>example.com</quote>
-    that contains any of the words <quote>ads</quote>, <quote>banner</quote>, 
-    <quote>banners</quote> (because of the <quote>?</quote>) or <quote>junk</quote>.
-    The path does not have to end in these words, just contain them.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term><literal>.example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$</literal></term>
-  <listitem>
-   <para>
-    This is very much the same as above, except now it must end in either 
-    <quote>.jpg</quote>, <quote>.jpeg</quote>, <quote>.gif</quote> or <quote>.png</quote>. So this 
-    one is limited to common image formats.
-   </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-<para>
- There are many, many good examples to be found in <filename>default.action</filename>, 
- and more tutorials below in <link linkend="regex">Appendix on regular expressions</link>.
-</para>
-
-</sect3>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 id="tag-pattern"><title>The Tag Pattern</title>
-
-<para>
- Tag patterns are used to change the applying actions based on the
- request's tags. Tags can be created with either the
- <link linkend="CLIENT-HEADER-TAGGER">client-header-tagger</link>
- or the  <link linkend="SERVER-HEADER-TAGGER">server-header-tagger</link> action.
-</para>
-
-<para>
- Tag patterns have to start with <quote>TAG:</quote>, so &my-app;
- can tell them apart from URL patterns. Everything after the colon
- including white space, is interpreted as a regular expression with
- path pattern syntax, except that tag patterns aren't left-anchored
- automatically (&my-app; doesn't silently add a <quote>^</quote>,
- you have to do it yourself if you need it).
-</para>
-
-<para>
- To match all requests that are tagged with <quote>foo</quote>
- your pattern line should be <quote>TAG:^foo$</quote>,
- <quote>TAG:foo</quote> would work as well, but it would also
- match requests whose tags contain <quote>foo</quote> somewhere.
- <quote>TAG: foo</quote> wouldn't work as it requires white space.
-</para>
-
-<para>
- Sections can contain URL and tag patterns at the same time,
- but tag patterns are checked after the URL patterns and thus
- always overrule them, even if they are located before the URL patterns.
-</para>
-
-<para>
- Once a new tag is added, Privoxy checks right away if it's matched by one
- of the tag patterns and updates the action settings accordingly. As a result
- tags can be used to activate other tagger actions, as long as these other
- taggers look for headers that haven't already be parsed.
-</para>
-
-<para>
- For example you could tag client requests which use the
- <literal>POST</literal> method,
- then use this tag to activate another tagger that adds a tag if cookies
- are sent, and then use a block action based on the cookie tag. This allows
- the outcome of one action, to be input into a subsequent action. However if
- you'd reverse the position of the described taggers, and activated the
- method tagger based on the cookie tagger, no method tags would be created.
- The method tagger would look for the request line, but at the time
- the cookie tag is created, the request line has already been parsed.
-</para>
-
-<para>
- While this is a limitation you should be aware of, this kind of
- indirection is seldom needed anyway and even the example doesn't
- make too much sense.
-</para>
-
-</sect3>
-
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="actions">
-<title>Actions</title>
-<para>
- All actions are disabled by default, until they are explicitly enabled
- somewhere in an actions file. Actions are turned on if preceded with a
- <quote>+</quote>, and turned off if preceded with a <quote>-</quote>. So a
- <literal>+action</literal> means <quote>do that action</quote>, e.g.
- <literal>+block</literal> means <quote>please block URLs that match the
- following patterns</quote>, and <literal>-block</literal> means <quote>don't
- block URLs that match the following patterns, even if <literal>+block</literal>
- previously applied.</quote>
-
-</para>
-
-<para> 
- Again, actions are invoked by placing them on a line, enclosed in curly braces and
- separated by whitespace, like in 
- <literal>{+some-action -some-other-action{some-parameter}}</literal>,
- followed by a list of URL patterns, one per line, to which they apply.
- Together, the actions line and the following pattern lines make up a section
- of the actions file. 
-</para>
-
-<para> 
- Actions fall into three categories:
-</para>
-
-<para>
- <itemizedlist>
- <listitem>
-  <para>  
-   Boolean, i.e the action can only be <quote>enabled</quote> or
-   <quote>disabled</quote>. Syntax:
-  </para>
-  <para>
-   <screen>
-  +<replaceable class="function">name</replaceable>        # enable action <replaceable class="parameter">name</replaceable>
-  -<replaceable class="function">name</replaceable>        # disable action <replaceable class="parameter">name</replaceable></screen>
-  </para>
-  <para>  
-   Example: <literal>+handle-as-image</literal>
-  </para>
- </listitem>
-
-
- <listitem>
-  <para>  
-   Parameterized, where some value is required in order to enable this type of action.
-   Syntax:
-  </para>
-  <para>
-   <screen>
-  +<replaceable class="function">name</replaceable>{<replaceable class="parameter">param</replaceable>}  # enable action and set parameter to <replaceable class="parameter">param</replaceable>,
-               # overwriting parameter from previous match if necessary
-  -<replaceable class="function">name</replaceable>         # disable action. The parameter can be omitted</screen>
-  </para>
-  <para>
-   Note that if the URL matches multiple positive forms of a parameterized action,
-   the last match wins, i.e. the params from earlier matches are simply ignored.
-  </para>
-  <para>  
-   Example: <literal>+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.4) Gecko/20070602 Firefox/2.0.0.4}</literal>
-  </para>
- </listitem>
- 
- <listitem>
-  <para>  
-   Multi-value. These look exactly like parameterized actions,
-   but they behave differently: If the action applies multiple times to the
-   same URL, but with different parameters, <emphasis>all</emphasis> the parameters
-   from <emphasis>all</emphasis> matches are remembered. This is used for actions
-   that can be executed for the same request repeatedly, like adding multiple
-   headers, or filtering through multiple filters. Syntax:
-  </para>
-  <para>
-   <screen>
-  +<replaceable class="function">name</replaceable>{<replaceable class="parameter">param</replaceable>}   # enable action and add <replaceable class="parameter">param</replaceable> to the list of parameters
-  -<replaceable class="function">name</replaceable>{<replaceable class="parameter">param</replaceable>}   # remove the parameter <replaceable class="parameter">param</replaceable> from the list of parameters
-                # If it was the last one left, disable the action.
-  <replaceable class="parameter">-name</replaceable>          # disable this action completely and remove all parameters from the list</screen>
-  </para>
-  <para>  
-   Examples: <literal>+add-header{X-Fun-Header: Some text}</literal> and
-   <literal>+filter{html-annoyances}</literal>
-  </para>
- </listitem>
-
- </itemizedlist>
-</para>
-
-<para>
- If nothing is specified in any actions file, no <quote>actions</quote> are
- taken. So in this case <application>Privoxy</application> would just be a
- normal, non-blocking, non-filtering proxy. You must specifically enable the
- privacy and blocking features you need (although the provided default actions
- files will give a good starting point).
-</para>
-
-<para>
- Later defined action sections always over-ride earlier ones of the same type.
- So exceptions to any rules you make, should come in the latter part of the file (or 
- in a file that is processed later when using multiple actions files such 
- as <filename>user.action</filename>). For multi-valued actions, the actions
- are applied in the order they are specified. Actions files are processed in
- the order they are defined in <filename>config</filename> (the default
- installation has three actions files). It also quite possible for any given
- URL to match more than one <quote>pattern</quote> (because of wildcards and
- regular expressions), and thus to trigger more than one set of actions! Last
- match wins.
-</para>
-
-<!-- start actions listing -->
-<para>
- The list of valid <application>Privoxy</application> actions are:
-</para>
-
-
-<!-- ********************************************************** -->
-<!-- Please note the below defined actions use id's that are    -->
-<!-- probably linked from other places, so please don't change. -->
-<!--                                                            -->
-<!-- ********************************************************** -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect3 renderas="sect4" id="add-header">
-<title>add-header</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Confuse log analysis, custom applications</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Sends a user defined HTTP header to the web server.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Multi-value.</para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Any string value is possible. Validity of the defined HTTP headers is not checked.
-    It is recommended that you use the <quote><literal>X-</literal></quote> prefix
-    for custom headers.
-   </para>
-  </listitem>
- </varlistentry>
- 
-<varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This action may be specified multiple times, in order to define multiple 
-    headers. This is rarely needed for the typical user. If you don't know what 
-    <quote>HTTP headers</quote> are, you definitely don't need to worry about this 
-    one.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-    <para>
-     <screen>+add-header{X-User-Tracking: sucks}</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="block">
-<title>block</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Block ads or other unwanted content</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Requests for URLs to which this action applies are blocked, i.e. the
-    requests are trapped by &my-app; and the requested URL is never retrieved,
-    but is answered locally with a substitute page or image, as determined by
-    the <literal><link
-    linkend="handle-as-image">handle-as-image</link></literal>,
-    <literal><link
-    linkend="set-image-blocker">set-image-blocker</link></literal>, and 
-    <literal><link
-    linkend="handle-as-empty-document">handle-as-empty-document</link></literal> actions.
-    
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>A block reason that should be given to the user.</para>
-  </listitem>
- </varlistentry>
- 
-<varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    <application>Privoxy</application> sends a special <quote>BLOCKED</quote> page
-    for requests to blocked pages. This page contains the block reason given as
-    parameter, a link to find out why the block action applies, and a click-through
-    to the blocked content (the latter only if the force feature is available and
-    enabled).
-   </para>
-   <para> 
-    A very important exception occurs if <emphasis>both</emphasis> 
-    <literal>block</literal> and <literal><link linkend="handle-as-image">handle-as-image</link></literal>,
-    apply to the same request: it will then be replaced by an image. If 
-    <literal><link linkend="set-image-blocker">set-image-blocker</link></literal>
-    (see below) also applies, the type of image will be determined by its parameter,
-    if not, the standard checkerboard pattern is sent.
-   </para>
-   <para>
-    It is important to understand this process, in order 
-    to understand how <application>Privoxy</application> deals with 
-    ads and other unwanted content. Blocking is a core feature, and one 
-    upon which various other features depend.
-   </para>
-   <para>
-    The <literal><link linkend="filter">filter</link></literal>
-    action can perform a very similar task, by <quote>blocking</quote>
-    banner images and other content through rewriting the relevant URLs in the
-    document's HTML source, so they don't get requested in the first place.
-    Note that this is a totally different technique, and it's easy to confuse the two.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen>{+block{No nasty stuff for you.}}
-# Block and replace with "blocked" page
- .nasty-stuff.example.com
-
-{+block{Doubleclick banners.} +handle-as-image} 
-# Block and replace with image
- .ad.doubleclick.net
- .ads.r.us/banners/
-
-{+block{Layered ads.} +handle-as-empty-document} 
-# Block and then ignore
- adserver.example.net/.*\.js$</screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="change-x-forwarded-for">
-<title>change-x-forwarded-for</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Improve privacy by not forwarding the source of the request in the HTTP headers.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes the <quote>X-Forwarded-For:</quote> HTTP header from the client request,
-    or adds a new one.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <itemizedlist>
-    <listitem>
-     <para><quote>block</quote> to delete the header.</para>
-    </listitem>
-    <listitem>
-     <para>
-       <quote>add</quote> to create the header (or append
-       the client's IP address to an already existing one).
-     </para>
-    </listitem>
-   </itemizedlist>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    It is safe and recommended to use <literal>block</literal>.
-   </para>
-   <para>
-    Forwarding the source address of the request may make
-    sense in some multi-user setups but is also a privacy risk.
-   </para>
-  </listitem>
- </varlistentry>
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-    <para>
-     <screen>+change-x-forwarded-for{block}</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="client-header-filter">
-<title>client-header-filter</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-   Rewrite or remove single client headers.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    All client headers to which this action applies are filtered on-the-fly through
-    the specified regular expression based substitutions.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    The name of a client-header filter, as defined in one of the
-    <link linkend="filter-file">filter files</link>.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Client-header filters are applied to each header on its own, not to
-    all at once. This makes it easier to diagnose problems, but on the downside
-    you can't write filters that only change header x if header y's value is z.
-    You can do that by using tags though.
-   </para>
-   <para>
-    Client-header filters are executed after the other header actions have finished
-    and use their output as input.
-   </para>
-   <para>
-    If the request URL gets changed, &my-app; will detect that and use the new
-    one. This can be used to rewrite the request destination behind the client's
-    back, for example to specify a Tor exit relay for certain requests.
-   </para>
-   <para>
-    Please refer to the <link linkend="filter-file">filter file chapter</link>
-    to learn which client-header filters are available by default, and how to
-    create your own.
-   </para>
-
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen>
-# Hide Tor exit notation in Host and Referer Headers
-{+client-header-filter{hide-tor-exit-notation}}
-/
-    </screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="client-header-tagger">
-<title>client-header-tagger</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-   Block requests based on their headers.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Client headers to which this action applies are filtered on-the-fly through
-    the specified regular expression based substitutions, the result is used as
-    tag. 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    The name of a client-header tagger, as defined in one of the
-    <link linkend="filter-file">filter files</link>.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Client-header taggers are applied to each header on its own,
-    and as the header isn't modified, each tagger <quote>sees</quote>
-    the original.
-   </para>
-   <para>
-    Client-header taggers are the first actions that are executed
-    and their tags can be used to control every other action.
-   </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen>
-# Tag every request with the User-Agent header
-{+client-header-tagger{user-agent}}
-/
-
-# Tagging itself doesn't change the action
-# settings, sections with TAG patterns do:
-#
-# If it's a download agent, use a different forwarding proxy,
-# show the real User-Agent and make sure resume works.
-{+forward-override{forward-socks5 10.0.0.2:2222 .} \
- -hide-if-modified-since      \
- -overwrite-last-modified     \
- -hide-user-agent             \
- -filter                      \
- -deanimate-gifs              \
-}
-TAG:^User-Agent: NetBSD-ftp/
-TAG:^User-Agent: Novell ZYPP Installer
-TAG:^User-Agent: RPM APT-HTTP/
-TAG:^User-Agent: fetch libfetch/
-TAG:^User-Agent: Ubuntu APT-HTTP/
-TAG:^User-Agent: MPlayer/
-    </screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="content-type-overwrite">
-<title>content-type-overwrite</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Stop useless download menus from popping up, or change the browser's rendering mode</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Replaces the <quote>Content-Type:</quote> HTTP server header.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Any string. 
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The <quote>Content-Type:</quote> HTTP server header is used by the
-    browser to decide what to do with the document. The value of this
-    header can cause the browser to open a download menu instead of
-    displaying the document by itself, even if the document's format is
-    supported by the browser. 
-   </para>
-   <para>
-    The declared content type can also affect which rendering mode
-    the browser chooses. If XHTML is delivered as <quote>text/html</quote>,
-    many browsers treat it as yet another broken HTML document.
-    If it is send as <quote>application/xml</quote>, browsers with
-    XHTML support will only display it, if the syntax is correct.
-   </para>
-   <para>
-    If you see a web site that proudly uses XHTML buttons, but sets
-    <quote>Content-Type: text/html</quote>, you can use &my-app;
-    to overwrite it with <quote>application/xml</quote> and validate
-    the web master's claim inside your XHTML-supporting browser.
-    If the syntax is incorrect, the browser will complain loudly. 
-   </para>
-   <para>
-    You can also go the opposite direction: if your browser prints
-    error messages instead of rendering a document falsely declared
-    as XHTML, you can overwrite the content type with
-    <quote>text/html</quote> and have it rendered as broken HTML document. 
-   </para>
-   <para>
-    By default <literal>content-type-overwrite</literal> only replaces
-    <quote>Content-Type:</quote> headers that look like some kind of text.
-    If you want to overwrite it unconditionally, you have to combine it with
-    <literal><link linkend="force-text-mode">force-text-mode</link></literal>.
-    This limitation exists for a reason, think twice before circumventing it.
-   </para>
-   <para>
-    Most of the time it's easier to replace this action with a custom
-    <literal><link linkend="server-header-filter">server-header filter</link></literal>.
-    It allows you to activate it for every document of a certain site and it will still
-    only replace the content types you aimed at.
-   </para>
-   <para>
-    Of course you can apply <literal>content-type-overwrite</literal>
-    to a whole site and then make URL based exceptions, but it's a lot
-    more work to get the same precision. 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (sections):</term>
-  <listitem>
-    <para>
-     <screen># Check if www.example.net/ really uses valid XHTML
-{ +content-type-overwrite{application/xml} }
-www.example.net/
-
-# but leave the content type unmodified if the URL looks like a style sheet
-{-content-type-overwrite}
-www.example.net/.*\.css$
-www.example.net/.*style
-</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="crunch-client-header">
-<!--
-new action
--->
-<title>crunch-client-header</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Remove a client header <application>Privoxy</application> has no dedicated action for.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes every header sent by the client that contains the string the user supplied as parameter.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Any string.
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This action allows you to block client headers for which no dedicated
-    <application>Privoxy</application> action exists.
-    <application>Privoxy</application> will remove every client header that
-    contains the string you supplied as parameter.
-   </para>
-   <para>
-    Regular expressions are <emphasis>not supported</emphasis> and you can't
-    use this action to block different headers in the same request, unless
-    they contain the same string.
-   </para>
-   <para>
-    <literal>crunch-client-header</literal> is only meant for quick tests.
-    If you have to block several different headers, or only want to modify
-    parts of them, you should use a
-    <literal><link linkend="client-header-filter">client-header filter</link></literal>.
-   </para>
-    <warning>
-     <para>
-      Don't block any header without understanding the consequences.
-     </para>
-    </warning>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen># Block the non-existent "Privacy-Violation:" client header 
-{ +crunch-client-header{Privacy-Violation:} }
-/
-    </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="crunch-if-none-match">
-<title>crunch-if-none-match</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Prevent yet another way to track the user's steps between sessions.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes the <quote>If-None-Match:</quote> HTTP client header.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Removing the <quote>If-None-Match:</quote> HTTP client header
-    is useful for filter testing, where you want to force a real
-    reload instead of getting status code <quote>304</quote> which
-    would cause the browser to use a cached copy of the page.
-   </para>
-   <para>
-    It is also useful to make sure the header isn't used as a cookie
-    replacement (unlikely but possible).
-   </para>
-   <para>
-    Blocking the <quote>If-None-Match:</quote> header shouldn't cause any
-    caching problems, as long as the <quote>If-Modified-Since:</quote> header
-    isn't blocked or missing as well.
-   </para>
-   <para>
-    It is recommended to use this action together with
-    <literal><link linkend="hide-if-modified-since">hide-if-modified-since</link></literal>
-    and
-    <literal><link linkend="overwrite-last-modified">overwrite-last-modified</link></literal>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen># Let the browser revalidate cached documents but don't
-# allow the server to use the revalidation headers for user tracking.
-{+hide-if-modified-since{-60} \
- +overwrite-last-modified{randomize} \
- +crunch-if-none-match}
-/   </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="crunch-incoming-cookies">
-<title>crunch-incoming-cookies</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-    Prevent the web server from setting HTTP cookies on your system
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes any <quote>Set-Cookie:</quote> HTTP headers from server replies.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This action is only concerned with <emphasis>incoming</emphasis> HTTP cookies. For
-    <emphasis>outgoing</emphasis> HTTP cookies, use
-    <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal>.
-    Use <emphasis>both</emphasis> to disable HTTP cookies completely.
-   </para>
-   <para>
-    It makes <emphasis>no sense at all</emphasis> to use this action in conjunction
-    with the <literal><link linkend="session-cookies-only">session-cookies-only</link></literal> action,
-    since it would prevent the session cookies from being set. See also 
-    <literal><link linkend="filter-content-cookies">filter-content-cookies</link></literal>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-    <screen>+crunch-incoming-cookies</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="crunch-server-header">
-<title>crunch-server-header</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Remove a server header <application>Privoxy</application> has no dedicated action for.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes every header sent by the server that contains the string the user supplied as parameter.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Any string.
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This action allows you to block server headers for which no dedicated
-    <application>Privoxy</application> action exists. <application>Privoxy</application>
-    will remove every server header that contains the string you supplied as parameter.
-   </para>
-   <para>
-    Regular expressions are <emphasis>not supported</emphasis> and you can't
-    use this action to block different headers in the same request, unless
-    they contain the same string.
-   </para>
-   <para>
-    <literal>crunch-server-header</literal> is only meant for quick tests.
-    If you have to block several different headers, or only want to modify
-    parts of them, you should use a custom
-    <literal><link linkend="server-header-filter">server-header filter</link></literal>.
-   </para>
-    <warning>
-     <para>
-     Don't block any header without understanding the consequences.
-     </para>
-    </warning>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen># Crunch server headers that try to prevent caching
-{ +crunch-server-header{no-cache} }
-/   </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="crunch-outgoing-cookies">
-<title>crunch-outgoing-cookies</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-    Prevent the web server from reading any HTTP cookies from your system
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes any <quote>Cookie:</quote> HTTP headers from client requests.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This action is only concerned with <emphasis>outgoing</emphasis> HTTP cookies. For
-    <emphasis>incoming</emphasis> HTTP cookies, use
-    <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal>.
-    Use <emphasis>both</emphasis> to disable HTTP cookies completely.
-   </para>
-   <para>
-    It makes <emphasis>no sense at all</emphasis> to use this action in conjunction
-    with the <literal><link linkend="session-cookies-only">session-cookies-only</link></literal> action,
-    since it would prevent the session cookies from being read.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-    <screen>+crunch-outgoing-cookies</screen>
-   </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="deanimate-gifs">
-<title>deanimate-gifs</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Stop those annoying, distracting animated GIF images.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    De-animate GIF animations, i.e. reduce them to their first or last image.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    <quote>last</quote> or <quote>first</quote>
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This will also shrink the images considerably (in bytes, not pixels!). If
-    the option <quote>first</quote> is given, the first frame of the animation
-    is used as the replacement. If <quote>last</quote> is given, the last
-    frame of the animation is used instead, which probably makes more sense for
-    most banner animations, but also has the risk of not showing the entire
-    last frame (if it is only a delta to an earlier frame).
-   </para>
-   <para>
-    You can safely use this action with patterns that will also match non-GIF
-    objects, because no attempt will be made at anything that doesn't look like
-    a GIF.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-    <para>
-      <screen>+deanimate-gifs{last}</screen>
-    </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="downgrade-http-version">
-<title>downgrade-http-version</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Work around (very rare) problems with HTTP/1.1</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Downgrades HTTP/1.1 client requests and server replies to HTTP/1.0.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
- 
-<varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This is a left-over from the time when <application>Privoxy</application>
-    didn't support important HTTP/1.1 features well. It is left here for the
-    unlikely case that you experience HTTP/1.1 related problems with some server
-    out there. Not all HTTP/1.1 features and requirements are supported yet,
-    so there is a chance you might need this action.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen>{+downgrade-http-version}
-problem-host.example.com</screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="fast-redirects">
-<title>fast-redirects</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Fool some click-tracking scripts and speed up indirect links.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Detects redirection URLs and redirects the browser without contacting
-    the redirection server first.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <itemizedlist>
-    <listitem>
-     <para>
-      <quote>simple-check</quote> to just search for the string <quote>http://</quote>
-      to detect redirection URLs.
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      <quote>check-decoded-url</quote> to decode URLs (if necessary) before searching
-      for redirection URLs.
-     </para>
-    </listitem>
-   </itemizedlist>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>  
-    Many sites, like yahoo.com, don't just link to other sites. Instead, they
-    will link to some script on their own servers, giving the destination as a
-    parameter, which will then redirect you to the final target. URLs
-    resulting from this scheme typically look like:
-    <quote>http://www.example.org/click-tracker.cgi?target=http%3a//www.example.net/</quote>.
-  </para>
-   <para>
-    Sometimes, there are even multiple consecutive redirects encoded in the
-    URL. These redirections via scripts make your web browsing more traceable,
-    since the server from which you follow such a link can see where you go
-    to. Apart from that, valuable bandwidth and time is wasted, while your
-    browser asks the server for one redirect after the other. Plus, it feeds
-    the advertisers.
-   </para>
-   <para>
-    This feature is currently not very smart and is scheduled for improvement.
-    If it is enabled by default, you will have to create some exceptions to
-    this action. It can lead to failures in several ways: 
-   </para>
-   <para>
-    Not every URLs with other URLs as parameters is evil.
-    Some sites offer a real service that requires this information to work.
-    For example a validation service needs to know, which document to validate.
-    <literal>fast-redirects</literal> assumes that every URL parameter that
-    looks like another URL is a redirection target, and will always redirect to
-    the last one. Most of the time the assumption is correct, but if it isn't,
-    the user gets redirected anyway.
-   </para>
-   <para>
-    Another failure occurs if the URL contains other parameters after the URL parameter.
-    The URL:
-    <quote>http://www.example.org/?redirect=http%3a//www.example.net/&amp;foo=bar</quote>.
-    contains the redirection URL <quote>http://www.example.net/</quote>,
-    followed by another parameter. <literal>fast-redirects</literal> doesn't know that
-    and will cause a redirect to <quote>http://www.example.net/&amp;foo=bar</quote>.
-    Depending on the target server configuration, the parameter will be silently ignored
-    or lead to a <quote>page not found</quote> error. You can prevent this problem by
-    first using the <literal><link linkend="redirect">redirect</link></literal> action
-    to remove the last part of the URL, but it requires a little effort.
-   </para>
-   <para>
-    To detect a redirection URL, <literal>fast-redirects</literal> only
-    looks for the string <quote>http://</quote>, either in plain text
-    (invalid but often used) or encoded as <quote>http%3a//</quote>.
-    Some sites use their own URL encoding scheme, encrypt the address
-    of the target server or replace it with a database id. In theses cases
-    <literal>fast-redirects</literal> is fooled and the request reaches the
-    redirection server where it probably gets logged.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-    <para>
-     <screen>
- { +fast-redirects{simple-check} }
-   one.example.com 
-
- { +fast-redirects{check-decoded-url} }
-   another.example.com/testing</screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="filter">
-<title>filter</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Get rid of HTML and JavaScript annoyances, banner advertisements (by size), 
-         do fun text replacements, add personalized effects, etc.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    All instances of text-based type, most notably HTML and JavaScript, to which
-    this action applies, can be filtered on-the-fly through the specified regular
-    expression based substitutions. (Note: as of version 3.0.3 plain text documents
-    are exempted from filtering, because web servers often use the
-   <literal>text/plain</literal> MIME type for all files whose type they don't know.)
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    The name of a content filter, as defined in the <link linkend="filter-file">filter file</link>.
-    Filters can be defined in one or more  files as defined by the 
-    <literal><link linkend="filterfile">filterfile</link></literal>
-    option in the <link linkend="config">config file</link>. 
-    <filename>default.filter</filename> is the collection of filters 
-    supplied by the developers. Locally defined filters should go 
-    in their own file, such as <filename>user.filter</filename>.
-   </para>
-   <para>
-     When used in its negative form,
-     and without parameters, <emphasis>all</emphasis> filtering is completely disabled.
-  </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    For your convenience, there are a number of pre-defined filters available 
-    in the distribution filter file that you can use. See the examples below for
-    a list.
-   </para>
-   <para>
-    Filtering requires buffering the page content, which may appear to
-    slow down page rendering since nothing is displayed until all content has
-    passed the filters. (It does not really take longer, but seems that way
-    since the page is not incrementally displayed.) This effect will be more
-    noticeable on slower connections.
-   </para>
-   <para>
-   <quote>Rolling your own</quote>
-    filters requires a knowledge of 
-     <ulink url="http://en.wikipedia.org/wiki/Regular_expressions";><quote>Regular
-     Expressions</quote></ulink> and 
-      <ulink url="http://en.wikipedia.org/wiki/Html";><quote>HTML</quote></ulink>.
-    This is very powerful feature, and potentially very intrusive. 
-    Filters should be used with caution, and where an equivalent
-    <quote>action</quote> is not available.
-   </para>
-   <para>
-    The amount of data that can be filtered is limited to the 
-    <literal><link linkend="buffer-limit">buffer-limit</link></literal>
-    option in the main <link linkend="config">config file</link>. The 
-    default is 4096 KB (4 Megs). Once this limit is exceeded, the buffered
-    data, and all pending data, is passed through unfiltered. 
-   </para>
-   <para>
-    Inappropriate MIME types, such as zipped files, are not filtered at all.
-    (Again, only text-based types except plain text). Encrypted SSL data
-    (from HTTPS servers) cannot be filtered either, since this would violate
-    the integrity of the secure transaction. In some situations it might
-    be necessary to protect certain text, like source code, from filtering
-    by defining appropriate <literal>-filter</literal> exceptions.
-   </para>
-   <para>
-    Compressed content can't be filtered either, unless &my-app;
-    is compiled with zlib support (requires at least &my-app; 3.0.7),
-    in which case &my-app; will decompress the content before filtering
-    it.
-   </para>
-   <para>
-    If you use a &my-app; version without zlib support, but want filtering to work on
-    as much documents as possible, even those that would normally be sent compressed,
-    you must use the <literal><link linkend="prevent-compression">prevent-compression</link></literal>
-    action in conjunction with <literal>filter</literal>.
-   </para>
-   <para>
-    Content filtering can achieve some of the same effects as the 
-    <literal><link linkend="block">block</link></literal>
-    action, i.e. it can be used to block ads and banners. But the mechanism 
-    works quite differently. One effective use, is to block ad banners 
-    based on their size (see below), since many of these seem to be somewhat 
-    standardized.
-   </para>
-   <para>
-    <link linkend="contact">Feedback</link> with suggestions for new or
-    improved filters is particularly welcome!
-   </para>
-   <para>
-    The below list has only the names and a one-line description of each
-    predefined filter. There are <link linkend="predefined-filters">more
-    verbose explanations</link> of what these filters do in the <link
-    linkend="filter-file">filter file chapter</link>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (with filters from the distribution <filename>default.filter</filename> file).
-  See <link linkend="PREDEFINED-FILTERS">the Predefined Filters section</link> for 
-  more explanation on each:</term>
-  <listitem>
-   <para>
-    <anchor id="filter-js-annoyances">
-    <screen>+filter{js-annoyances}       # Get rid of particularly annoying JavaScript abuse.</screen>
-   </para>
-   <para>
-    <anchor id="filter-js-events">
-    <screen>+filter{js-events}           # Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).</screen>
-   </para>
-   <para>
-    <anchor id="filter-html-annoyances">
-    <screen>+filter{html-annoyances}     # Get rid of particularly annoying HTML abuse.</screen>
-   </para>
-   <para>
-    <anchor id="filter-content-cookies">
-    <screen>+filter{content-cookies}     # Kill cookies that come in the HTML or JS content.</screen>
-   </para>
-   <para>
-    <anchor id="filter-refresh-tags">
-    <screen>+filter{refresh-tags}        # Kill automatic refresh tags (for dial-on-demand setups).</screen>
-   </para>
-   <para>
-    <anchor id="filter-unsolicited-popups">
-    <screen>+filter{unsolicited-popups}  # Disable only unsolicited pop-up windows. Useful if your browser lacks this ability.</screen>
-   </para>
-   <para>
-    <anchor id="filter-all-popups">
-    <screen>+filter{all-popups}          # Kill all popups in JavaScript and HTML. Useful if your browser lacks this ability.</screen>
-   </para>
-   <para>
-    <anchor id="filter-img-reorder">
-    <screen>+filter{img-reorder}         # Reorder attributes in &lt;img&gt; tags to make the banners-by-* filters more effective.</screen>
-   </para>
-   <para>
-    <anchor id="filter-banners-by-size">
-    <screen>+filter{banners-by-size}     # Kill banners by size.</screen>
-   </para>
-   <para>
-    <anchor id="filter-banners-by-link">
-    <screen>+filter{banners-by-link}     # Kill banners by their links to known clicktrackers.</screen>
-   </para>
-   <para>
-    <anchor id="filter-webbugs">
-    <screen>+filter{webbugs}             # Squish WebBugs (1x1 invisible GIFs used for user tracking).</screen>
-   </para>
-   <para>
-    <anchor id="filter-tiny-textforms">
-    <screen>+filter{tiny-textforms}      # Extend those tiny textareas up to 40x80 and kill the hard wrap.</screen>
-   </para>
-   <para>
-    <anchor id="filter-jumping-windows">
-    <screen>+filter{jumping-windows}     # Prevent windows from resizing and moving themselves.</screen>
-   </para>
-   <para>
-    <anchor id="filter-frameset-borders">
-    <screen>+filter{frameset-borders}    # Give frames a border and make them resizable.</screen>
-   </para>
-   <para>
-    <anchor id="filter-demoronizer">
-    <screen>+filter{demoronizer}         # Fix MS's non-standard use of standard charsets.</screen>
-   </para>
-   <para>
-    <anchor id="filter-shockwave-flash">
-    <screen>+filter{shockwave-flash}     # Kill embedded Shockwave Flash objects.</screen>
-   </para>
-   <para>
-    <anchor id="filter-quicktime-kioskmode">
-    <screen>+filter{quicktime-kioskmode} # Make Quicktime movies saveable.</screen>
-   </para>
-   <para>
-    <anchor id="filter-fun">
-    <screen>+filter{fun}                 # Text replacements for subversive browsing fun!</screen>
-   </para>
-   <para>
-    <anchor id="filter-crude-parental">
-    <screen>+filter{crude-parental}      # Crude parental filtering. Note that this filter doesn't work reliably.</screen>
-   </para>
-   <para>
-    <anchor id="filter-ie-exploits">
-    <screen>+filter{ie-exploits}         # Disable some known Internet Explorer bug exploits.</screen>
-   </para>
-   <para>
-    <anchor id="filter-site-specifics">
-    <screen>+filter{site-specifics}      # Cure for site-specific problems. Don't apply generally!</screen>
-   </para>
-   <para>
-    <anchor id="filter-no-ping">
-    <screen>+filter{no-ping}             # Removes non-standard ping attributes in &lt;a&gt; and &lt;area&gt; tags.</screen>
-   </para>
-   <para>
-    <anchor id="filter-google">
-    <screen>+filter{google}              # CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.</screen>
-   </para>
-   <para>
-    <anchor id="filter-yahoo">
-    <screen>+filter{yahoo}               # CSS-based block for Yahoo text ads. Also removes a width limitation.</screen>
-   </para>
-   <para>
-    <anchor id="filter-msn">
-    <screen>+filter{msn}                 # CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.</screen>
-   </para>
-   <para>
-    <anchor id="filter-blogspot">
-    <screen>+filter{blogspot}            # Cleans up some Blogspot blogs. Read the fine print before using this.</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="force-text-mode">
-<title>force-text-mode</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Force <application>Privoxy</application> to treat a document as if it was in some kind of <emphasis>text</emphasis> format.   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Declares a document as text, even if the <quote>Content-Type:</quote> isn't detected as such.
-   </para>    
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    As explained <literal><link linkend="filter">above</link></literal>,
-    <application>Privoxy</application> tries to only filter files that are
-    in some kind of text format. The same restrictions apply to
-    <literal><link linkend="content-type-overwrite">content-type-overwrite</link></literal>.
-    <literal>force-text-mode</literal> declares a document as text,
-    without looking at the <quote>Content-Type:</quote> first.
-   </para>
-   <warning> 
-    <para>
-     Think twice before activating this action. Filtering binary data
-     with regular expressions can cause file damage.
-    </para>
-   </warning>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-     <screen>
-+force-text-mode
-     </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="forward-override">
-<title>forward-override</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Change the forwarding settings based on User-Agent or request origin</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Overrules the forward directives in the configuration file.
-   </para>    
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Multi-value.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <itemizedlist>
-    <listitem>
-     <para><quote>forward .</quote> to use a direct connection without any additional proxies.</para>
-    </listitem>
-    <listitem>
-     <para>
-      <quote>forward 127.0.0.1:8123</quote> to use the HTTP proxy listening at 127.0.0.1 port 8123.
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      <quote>forward-socks4a 127.0.0.1:9050 .</quote> to use the socks4a proxy listening at
-      127.0.0.1 port 9050. Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote>
-      to use a socks4 connection  (with local DNS resolution) instead, use <quote>forward-socks5</quote>
-      for socks5 connections (with remote DNS resolution).
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      <quote>forward-socks4a 127.0.0.1:9050 proxy.example.org:8000</quote> to use the socks4a proxy
-      listening at 127.0.0.1 port 9050 to reach the HTTP proxy listening at proxy.example.org port 8000.
-      Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote> to use a socks4 connection
-      (with local DNS resolution) instead, use <quote>forward-socks5</quote>
-      for socks5 connections (with remote DNS resolution).
-     </para>
-    </listitem>
-   </itemizedlist>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This action takes parameters similar to the
-    <link linkend="forwarding">forward</link> directives in the configuration
-    file, but without the URL pattern. It can be used as replacement, but normally it's only
-    used in cases where matching based on the request URL isn't sufficient.
-   </para>
-   <warning> 
-    <para>
-     Please read the description for the <link linkend="forwarding">forward</link> directives before
-     using this action. Forwarding to the wrong people will reduce your privacy and increase the
-     chances of man-in-the-middle attacks.
-    </para>
-    <para>
-     If the ports are missing or invalid, default values will be used. This might change
-     in the future and you shouldn't rely on it. Otherwise incorrect syntax causes Privoxy
-     to exit.
-    </para>
-    <para>
-     Use the <ulink url="http://config.privoxy.org/show-url-info";>show-url-info CGI page</ulink>
-     to verify that your forward settings do what you thought the do.
-    </para>
-   </warning>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-     <screen>
-# Always use direct connections for requests previously tagged as
-# <quote>User-Agent: fetch libfetch/2.0</quote> and make sure
-# resuming downloads continues to work.
-# This way you can continue to use Tor for your normal browsing,
-# without overloading the Tor network with your FreeBSD ports updates
-# or downloads of bigger files like ISOs.
-# Note that HTTP headers are easy to fake and therefore their
-# values are as (un)trustworthy as your clients and users.
-{+forward-override{forward .} \
- -hide-if-modified-since      \
- -overwrite-last-modified     \
-}
-TAG:^User-Agent: fetch libfetch/2\.0$
-     </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="handle-as-empty-document">
-<title>handle-as-empty-document</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Mark URLs that should be replaced by empty documents <emphasis>if they get blocked</emphasis></para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    This action alone doesn't do anything noticeable. It just marks URLs.
-    If the <literal><link linkend="block">block</link></literal> action <emphasis>also applies</emphasis>,
-    the presence or absence of this mark decides whether an HTML <quote>BLOCKED</quote>
-    page, or an empty document will be sent to the client as a substitute for the blocked content.
-    The <emphasis>empty</emphasis> document isn't literally empty, but actually contains a single space.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Some browsers complain about syntax errors if JavaScript documents
-    are blocked with <application>Privoxy's</application>
-    default HTML page; this option can be used to silence them.
-    And of course this action can also be used to eliminate the &my-app;
-    BLOCKED message in frames.
-   </para>
-   <para>
-    The content type for the empty document can be specified with
-    <literal><link linkend="content-type-overwrite">content-type-overwrite{}</link></literal>,
-    but usually this isn't necessary.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-     <screen># Block all documents on example.org that end with ".js",
-# but send an empty document instead of the usual HTML message. 
-{+block{Blocked JavaScript} +handle-as-empty-document}
-example.org/.*\.js$
-     </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="handle-as-image">
-<title>handle-as-image</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Mark URLs as belonging to images (so they'll be replaced by images <emphasis>if they do get blocked</emphasis>, rather than HTML pages)</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    This action alone doesn't do anything noticeable. It just marks URLs as images.
-    If the <literal><link linkend="block">block</link></literal> action <emphasis>also applies</emphasis>,
-    the presence or absence of this mark decides whether an HTML <quote>blocked</quote>
-    page, or a replacement image (as determined by the <literal><link
-    linkend="set-image-blocker">set-image-blocker</link></literal> action) will be sent to the
-    client as a substitute for the blocked content.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The below generic example section is actually part of <filename>default.action</filename>.
-    It marks all URLs with well-known image file name extensions as images and should
-    be left intact. 
-   </para>
-   <para>
-    Users will probably only want to use the handle-as-image action in conjunction with
-    <literal><link linkend="block">block</link></literal>, to block sources of banners, whose URLs don't
-    reflect the file type, like in the second example section.
-   </para>
-   <para>
-    Note that you cannot treat HTML pages as images in most cases. For instance, (in-line) ad
-    frames require an HTML page to be sent, or they won't display properly.
-    Forcing <literal>handle-as-image</literal> in this situation will not replace the
-    ad frame with an image, but lead to error messages.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (sections):</term>
-  <listitem>
-   <para>
-     <screen># Generic image extensions:
-#
-{+handle-as-image}
-/.*\.(gif|jpg|jpeg|png|bmp|ico)$
-
-# These don't look like images, but they're banners and should be
-# blocked as images:
-#
-{+block{Nasty banners.} +handle-as-image}
-nasty-banner-server.example.com/junk.cgi\?output=trash
-</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hide-accept-language">
-<title>hide-accept-language</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Pretend to use different language settings.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes or replaces the <quote>Accept-Language:</quote> HTTP header in client requests.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Keyword: <quote>block</quote>, or any user defined value.
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Faking the browser's language settings can be useful to make a
-    foreign User-Agent set with
-    <literal><link linkend="hide-user-agent">hide-user-agent</link></literal>
-    more believable.
-   </para>
-   <para>
-    However some sites with content in different languages check the
-    <quote>Accept-Language:</quote> to decide which one to take by default.
-    Sometimes it isn't possible to later switch to another language without
-    changing the <quote>Accept-Language:</quote> header first.
-   </para>
-   <para>
-    Therefore it's a good idea to either only change the
-    <quote>Accept-Language:</quote> header to languages you understand,
-    or to languages that aren't wide spread.
-   </para>
-   <para>
-    Before setting the <quote>Accept-Language:</quote> header
-    to a rare language, you should consider that it helps to
-    make your requests unique and thus easier to trace.
-    If you don't plan to change this header frequently,
-    you should stick to a common language. 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen># Pretend to use Canadian language settings.
-{+hide-accept-language{en-ca} \
-+hide-user-agent{Mozilla/5.0 (X11; U; OpenBSD i386; en-CA; rv:1.8.0.4) Gecko/20060628 Firefox/1.5.0.4} \
-}
-/   </screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hide-content-disposition">
-<title>hide-content-disposition</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Prevent download menus for content you prefer to view inside the browser.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes or replaces the <quote>Content-Disposition:</quote> HTTP header set by some servers.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Keyword: <quote>block</quote>, or any user defined value.
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Some servers set the <quote>Content-Disposition:</quote> HTTP header for
-    documents they assume you want to save locally before viewing them.
-    The <quote>Content-Disposition:</quote> header contains the file name
-    the browser is supposed to use by default.
-   </para>
-   <para>
-    In most browsers that understand this header, it makes it impossible to
-    <emphasis>just view</emphasis> the document, without downloading it first,
-    even if it's just a simple text file or an image.
-   </para>
-   <para>
-    Removing the <quote>Content-Disposition:</quote> header helps
-    to prevent this annoyance, but some browsers additionally check the
-    <quote>Content-Type:</quote> header, before they decide if they can
-    display a document without saving it first. In these cases, you have
-    to change this header as well, before the browser stops displaying
-    download menus.
-   </para>
-   <para>
-    It is also possible to change the server's file name suggestion
-    to another one, but in most cases it isn't worth the time to set
-    it up.
-   </para>
-   <para>
-    This action will probably be removed in the future,
-    use server-header filters instead.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-    <para>
-     <screen># Disarm the download link in Sourceforge's patch tracker
-{ -filter \
- +content-type-overwrite{text/plain}\
- +hide-content-disposition{block} }
- .sourceforge.net/tracker/download\.php</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hide-if-modified-since">
-<title>hide-if-modified-since</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Prevent yet another way to track the user's steps between sessions.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes the <quote>If-Modified-Since:</quote> HTTP client header or modifies its value. 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Keyword: <quote>block</quote>, or a user defined value that specifies a range of hours.
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Removing this header is useful for filter testing, where you want to force a real
-    reload instead of getting status code <quote>304</quote>, which would cause the
-    browser to use a cached copy of the page.
-   </para>
-   <para>
-    Instead of removing the header, <literal>hide-if-modified-since</literal> can
-    also add or subtract a random amount of time to/from the header's value.
-    You specify a range of minutes where the random factor should be chosen from and
-    <application>Privoxy</application> does the rest. A negative value means
-    subtracting, a positive value adding.
-   </para>
-   <para>
-    Randomizing the value of the <quote>If-Modified-Since:</quote> makes
-    it less likely that the server can use the time as a cookie replacement,
-    but you will run into caching problems if the random range is too high.
-   </para>
-   <para>
-    It is a good idea to only use a small negative value and let
-    <literal><link linkend="overwrite-last-modified">overwrite-last-modified</link></literal>
-    handle the greater changes.
-   </para>
-   <para>
-    It is also recommended to use this action together with
-    <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>,
-    otherwise it's more or less pointless.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen># Let the browser revalidate but make tracking based on the time less likely.
-{+hide-if-modified-since{-60} \
- +overwrite-last-modified{randomize} \
- +crunch-if-none-match}
-/</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hide-from-header">
-<title>hide-from-header</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Keep your (old and ill) browser from telling web servers your email address</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes any existing <quote>From:</quote> HTTP header, or replaces it with the
-    specified string.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Keyword: <quote>block</quote>, or any user defined value.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The keyword <quote>block</quote> will completely remove the header 
-    (not to be confused with the <literal><link linkend="block">block</link></literal>
-    action).
-   </para>
-   <para>
-    Alternately, you can specify any value you prefer to be sent to the web
-    server. If you do, it is a matter of fairness not to use any address that
-    is actually used by a real person.
-   </para>
-   <para>
-    This action is rarely needed, as modern web browsers don't send
-    <quote>From:</quote> headers anymore.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-    <screen>+hide-from-header{block}</screen> or
-    <screen>+hide-from-header{spam-me-senseless@xxxxxxxxxxxxxxxxxxxxxxx}</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hide-referrer">
-<title>hide-referrer</title>
-<anchor id="hide-referer">
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Conceal which link you followed to get to a particular site</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes the <quote>Referer:</quote> (sic) HTTP header from the client request,
-    or replaces it with a forged one.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <itemizedlist>
-    <listitem>
-     <para><quote>conditional-block</quote> to delete the header completely if the host has changed.</para>
-    </listitem>
-    <listitem>
-     <para><quote>conditional-forge</quote> to forge the header if the host has changed.</para>
-    </listitem>
-    <listitem>
-     <para><quote>block</quote> to delete the header unconditionally.</para>
-    </listitem>
-    <listitem>
-     <para><quote>forge</quote> to pretend to be coming from the homepage of the server we are talking to.</para>
-    </listitem>
-    <listitem>
-     <para>Any other string to set a user defined referrer.</para>
-    </listitem>
-   </itemizedlist>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    <literal>conditional-block</literal> is the only parameter,
-    that isn't easily detected in the server's log file. If it blocks the
-    referrer, the request will look like the visitor used a bookmark or
-    typed in the address directly.
-   </para>
-   <para>
-    Leaving the referrer unmodified for requests on the same host
-    allows the server owner to see the visitor's <quote>click path</quote>,
-    but in most cases she could also get that information by comparing
-    other parts of the log file: for example the User-Agent if it isn't
-    a very common one, or the user's IP address if it doesn't change between
-    different requests.
-   </para>
-   <para>
-    Always blocking the referrer, or using a custom one, can lead to
-    failures on servers that check the referrer before they answer any
-    requests, in an attempt to prevent their content from being
-    embedded or linked to elsewhere.
-   </para>
-   <para>
-    Both <literal>conditional-block</literal> and <literal>forge</literal>
-    will work with referrer checks, as long as content and valid referring page
-    are on the same host. Most of the time that's the case.
-   </para>
-   <para>  
-    <literal>hide-referer</literal> is an alternate spelling of
-    <literal>hide-referrer</literal> and the two can be can be freely
-    substituted with each other. (<quote>referrer</quote> is the
-    correct English spelling, however the HTTP specification has a bug - it
-    requires it to be spelled as <quote>referer</quote>.) 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-     <screen>+hide-referrer{forge}</screen> or
-     <screen>+hide-referrer{http://www.yahoo.com/}</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="hide-user-agent">
-<title>hide-user-agent</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Try to conceal your type of browser and client operating system</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Replaces the value of the <quote>User-Agent:</quote> HTTP header
-    in client requests with the specified value.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    Any user-defined string.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <warning> 
-    <para>
-     This can lead to problems on web sites that depend on looking at this header in
-     order to customize their content for different browsers (which, by the
-     way, is <emphasis>NOT</emphasis> the right thing to do: good web sites
-     work browser-independently). 
-    </para>
-   </warning>
-   <para>
-    Using this action in multi-user setups or wherever different types of
-    browsers will access the same <application>Privoxy</application> is
-    <emphasis>not recommended</emphasis>. In single-user, single-browser
-    setups, you might use it to delete your OS version information from
-    the headers, because it is an invitation to exploit known bugs for your
-    OS. It is also occasionally useful to forge this in order to access 
-    sites that won't let you in otherwise (though there may be a good 
-    reason in some cases). Example of this: some MSN sites will not 
-    let <application>Mozilla</application> enter, yet forging to a 
-    <application>Netscape 6.1</application> user-agent works just fine.
-    (Must be just a silly MS goof, I'm sure :-).
-   </para>
-   <para>
-     More information on known user-agent strings can be found at 
-     <ulink url="http://www.user-agents.org/";>http://www.user-agents.org/</ulink>
-     and 
-     <ulink url="http://en.wikipedia.org/wiki/User_agent";>http://en.wikipedia.org/wiki/User_agent</ulink>.
-   </para>
-   </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-     <screen>+hide-user-agent{Netscape 6.1 (X11; I; Linux 2.4.18 i686)}</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="limit-connect">
-<title>limit-connect</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Prevent abuse of <application>Privoxy</application> as a TCP proxy relay or disable SSL for untrusted sites</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Specifies to which ports HTTP CONNECT requests are allowable.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    A comma-separated list of ports or port ranges (the latter using dashes, with the minimum
-    defaulting to 0 and the maximum to 65K).
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    By default, i.e. if no <literal>limit-connect</literal> action applies,
-    <application>Privoxy</application> allows HTTP CONNECT requests to all
-    ports. Use <literal>limit-connect</literal> if fine-grained control
-    is desired for some or all destinations.
-   </para>
-   <para>
-    The CONNECT methods exists in HTTP to allow access to secure websites
-    (<quote>https://</quote> URLs) through proxies. It works very simply:
-    the proxy connects to the server on the specified port, and then
-    short-circuits its connections to the client and to the remote server.
-    This means CONNECT-enabled proxies can be used as TCP relays very easily.
-  </para>
-  <para>
-   <application>Privoxy</application> relays HTTPS traffic without seeing
-   the decoded content. Websites can leverage this limitation to circumvent &my-app;'s
-   filters. By specifying an invalid port range you can disable HTTPS entirely.
-  </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usages:</term>
-  <listitem>
-   <!-- I had trouble getting the spacing to look right in my browser -->
-   <!-- I probably have the wrong font setup, bollocks. -->
-   <!-- Apparently the emphasis tag uses a proportional font no matter what -->
-    <para>
-     <screen>+limit-connect{443}                   # Port 443 is OK.
-+limit-connect{80,443}                # Ports 80 and 443 are OK.
-+limit-connect{-3, 7, 20-100, 500-}   # Ports less than 3, 7, 20 to 100 and above 500 are OK.
-+limit-connect{-}                     # All ports are OK
-+limit-connect{,}                     # No HTTPS/SSL traffic is allowed</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="prevent-compression">
-<title>prevent-compression</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-    Ensure that servers send the content uncompressed, so it can be
-    passed through <literal><link linkend="filter">filter</link></literal>s.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Removes the Accept-Encoding header which can be used to ask for compressed transfer.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    More and more websites send their content compressed by default, which
-    is generally a good idea and saves bandwidth. But the <literal><link
-    linkend="filter">filter</link></literal> and
-    <literal><link linkend="deanimate-gifs">deanimate-gifs</link></literal>
-    actions need access to the uncompressed data.
-   </para>
-   <para>
-    When compiled with zlib support (available since &my-app; 3.0.7), content that should be
-    filtered is decompressed on-the-fly and you don't have to worry about this action.
-    If you are using an older &my-app; version, or one that hasn't been compiled with zlib
-    support, this action can be used to convince the server to send the content uncompressed.
-   </para>
-   <para>
-    Most text-based instances compress very well, the size is seldom decreased by less than 50%,
-    for markup-heavy instances like news feeds saving more than 90% of the original size isn't
-    unusual. 
-   </para>
-   <para>
-    Not using compression will therefore slow down the transfer, and you should only
-    enable this action if you really need it. As of &my-app; 3.0.7 it's disabled in all
-    predefined action settings.
-   </para>
-   <para>
-    Note that some (rare) ill-configured sites don't handle requests for uncompressed
-    documents correctly. Broken PHP applications tend to send an empty document body,
-    some IIS versions only send the beginning of the content. If you enable
-    <literal>prevent-compression</literal> per default, you might want to add
-    exceptions for those sites. See the example for how to do that.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (sections):</term>
-  <listitem>
-   <para>
-    <screen>
-# Selectively turn off compression, and enable a filter
-#
-{ +filter{tiny-textforms} +prevent-compression }
-# Match only these sites
- .google.
- sourceforge.net
- sf.net
-
-# Or instead, we could set a universal default:
-#
-{ +prevent-compression }
- / # Match all sites
-
-# Then maybe make exceptions for broken sites:
-#
-{ -prevent-compression }
-.compusa.com/</screen>
-   </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="overwrite-last-modified">
-<title>overwrite-last-modified</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Prevent yet another way to track the user's steps between sessions.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes the <quote>Last-Modified:</quote> HTTP server header or modifies its value. 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    One of the keywords: <quote>block</quote>, <quote>reset-to-request-time</quote>
-    and <quote>randomize</quote>
-   </para>    
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Removing the <quote>Last-Modified:</quote> header is useful for filter
-    testing, where you want to force a real reload instead of getting status
-    code <quote>304</quote>, which would cause the browser to reuse the old
-    version of the page.
-   </para>
-   <para>
-    The <quote>randomize</quote> option overwrites the value of the
-    <quote>Last-Modified:</quote> header with a randomly chosen time
-    between the original value and the current time. In theory the server
-    could send each document with a different <quote>Last-Modified:</quote>
-    header to track visits without using cookies. <quote>Randomize</quote>
-    makes it impossible and the browser can still revalidate cached documents. 
-   </para>
-   <para>
-    <quote>reset-to-request-time</quote> overwrites the value of the
-    <quote>Last-Modified:</quote> header with the current time. You could use
-    this option together with
-    <literal><link linkend="hide-if-modified-since">hide-if-modified-since</link></literal>
-    to further customize your random range.
-   </para>
-   <para>
-    The preferred parameter here is <quote>randomize</quote>. It is safe
-    to use, as long as the time settings are more or less correct.
-    If the server sets the <quote>Last-Modified:</quote> header to the time
-    of the request, the random range becomes zero and the value stays the same.
-    Therefore you should later randomize it a second time with
-    <literal><link linkend="hide-if-modified-since">hided-if-modified-since</link></literal>,
-    just to be sure. 
-   </para>
-   <para>
-    It is also recommended to use this action together with
-    <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-    <para>
-     <screen># Let the browser revalidate without being tracked across sessions
-{ +hide-if-modified-since{-60} \
- +overwrite-last-modified{randomize} \
- +crunch-if-none-match}
-/</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="redirect">
-<title>redirect</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-    Redirect requests to other sites.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Convinces the browser that the requested document has been moved
-    to another location and the browser should get it from there.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    An absolute URL or a single pcrs command.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Requests to which this action applies are answered with a
-    HTTP redirect to URLs of your choosing. The new URL is
-    either provided as parameter, or derived by applying a
-    single pcrs command to the original URL.
-   </para>
-   <para>
-    This action will be ignored if you use it together with
-    <literal><link linkend="block">block</link></literal>.
-    It can be combined with
-    <literal><link linkend="fast-redirects">fast-redirects{check-decoded-url}</link></literal>
-    to redirect to a decoded version of a rewritten URL.
-   </para>
-   <para>
-    Use this action carefully, make sure not to create redirection loops
-    and be aware that using your own redirects might make it
-    possible to fingerprint your requests.
-   </para>
-   <para>
-    In case of problems with your redirects, or simply to watch
-    them working, enable <link linkend="DEBUG">debug 128</link>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usages:</term>
-  <listitem>
-   <para>
-    <screen># Replace example.com's style sheet with another one
-{ +redirect{http://localhost/css-replacements/example.com.css} }
- example.com/stylesheet\.css
-
-# Create a short, easy to remember nickname for a favorite site
-# (relies on the browser accept and forward invalid URLs to &my-app;)
-{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} }
- a
-
-# Always use the expanded view for Undeadly.org articles
-# (Note the $ at the end of the URL pattern to make sure
-# the request for the rewritten URL isn't redirected as well)
-{+redirect{s@$@&amp;mode=expanded@}}
-undeadly.org/cgi\?action=article&amp;sid=\d*$
-
-# Redirect Google search requests to MSN
-{+redirect{s@^http://[^/]*/search\?q=([^&amp;]*).*@http://search.msn.com/results.aspx?q=$1@}}
-.google.com/search
-
-# Redirect MSN search requests to Yahoo
-{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&amp;]*).*@http://search.yahoo.com/search?p=$1@}}
-search.msn.com//results\.aspx\?q=
-
-# Redirect remote requests for this manual
-# to the local version delivered by Privoxy
-{+redirect{s@^http://www@http://config@}}
-www.privoxy.org/user-manual/</screen>
-   </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="server-header-filter">
-<title>server-header-filter</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-   Rewrite or remove single server headers.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    All server headers to which this action applies are filtered on-the-fly
-    through the specified regular expression based substitutions.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    The name of a server-header filter, as defined in one of the
-    <link linkend="filter-file">filter files</link>.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Server-header filters are applied to each header on its own, not to
-    all at once. This makes it easier to diagnose problems, but on the downside
-    you can't write filters that only change header x if header y's value is z.
-    You can do that by using tags though.
-   </para>
-   <para>
-    Server-header filters are executed after the other header actions have finished
-    and use their output as input.
-   </para>
-   <para>
-    Please refer to the <link linkend="filter-file">filter file chapter</link>
-    to learn which server-header filters are available by default, and how to
-    create your own.
-   </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen>
-{+server-header-filter{html-to-xml}}
-example.org/xml-instance-that-is-delivered-as-html
-
-{+server-header-filter{xml-to-html}}
-example.org/instance-that-is-delivered-as-xml-but-is-not
-    </screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="server-header-tagger">
-<title>server-header-tagger</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-   Enable or disable filters based on the Content-Type header.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Server headers to which this action applies are filtered on-the-fly through
-    the specified regular expression based substitutions, the result is used as
-    tag.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- boolean, parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    The name of a server-header tagger, as defined in one of the
-    <link linkend="filter-file">filter files</link>.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    Server-header taggers are applied to each header on its own,
-    and as the header isn't modified, each tagger <quote>sees</quote>
-    the original.
-   </para>
-   <para>
-    Server-header taggers are executed before all other header actions
-    that modify server headers. Their tags can be used to control
-    all of the other server-header actions, the content filters
-    and the crunch actions (<link linkend="redirect">redirect</link>
-    and <link linkend="block">block</link>).
-   </para>
-   <para>
-    Obviously crunching based on tags created by server-header taggers
-    doesn't prevent the request from showing up in the server's log file.
-   </para>
-
- </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage (section):</term>
-  <listitem>
-    <para>
-     <screen>
-# Tag every request with the content type declared by the server
-{+server-header-tagger{content-type}}
-/
-    </screen>
-    </para>
-  </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="session-cookies-only">
-<title>session-cookies-only</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>
-    Allow only temporary <quote>session</quote> cookies (for the current
-    browser session <emphasis>only</emphasis>). 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-    Deletes the <quote>expires</quote> field from <quote>Set-Cookie:</quote>
-    server headers. Most browsers will not store such cookies permanently and
-    forget them in between sessions.
-   </para>
-  </listitem>
- </varlistentry>
-
-<varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Boolean.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <para>
-    N/A
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    This is less strict than <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal> / 
-    <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal> and allows you to browse
-    websites that insist or rely on setting cookies, without compromising your privacy too badly.
-   </para>
-   <para>
-    Most browsers will not permanently store cookies that have been processed by
-    <literal>session-cookies-only</literal> and will forget about them between sessions.
-    This makes profiling cookies useless, but won't break sites which require cookies so
-    that you can log in for transactions. This is generally turned on for all 
-    sites, and is the recommended setting.
-   </para>
-   <para>
-    It makes <emphasis>no sense at all</emphasis> to use <literal>session-cookies-only</literal>
-    together with <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal> or
-    <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal>. If you do, cookies
-    will be plainly killed.
-   </para>
-   <para>
-    Note that it is up to the browser how it handles such cookies without an <quote>expires</quote>
-    field. If you use an exotic browser, you might want to try it out to be sure.
-   </para>
-   <para>
-    This setting also has no effect on cookies that may have been stored
-    previously by the browser before starting <application>Privoxy</application>.
-    These would have to be removed manually.
-   </para>
-   <para>
-     <application>Privoxy</application> also uses  
-     the <link linkend="filter-content-cookies">content-cookies filter</link> 
-     to block some types of cookies. Content cookies are not effected by 
-     <literal>session-cookies-only</literal>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-     <screen>+session-cookies-only</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3 renderas="sect4" id="set-image-blocker">
-<title>set-image-blocker</title>
-
-<variablelist>
- <varlistentry>
-  <term>Typical use:</term>
-  <listitem>
-   <para>Choose the replacement for blocked images</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Effect:</term>
-  <listitem>
-   <para>
-     This action alone doesn't do anything noticeable. If <emphasis>both</emphasis>
-     <literal><link linkend="block">block</link></literal> <emphasis>and</emphasis> <literal><link
-     linkend="handle-as-image">handle-as-image</link></literal> <emphasis>also</emphasis>
-     apply, i.e. if the request is to be blocked as an image,
-     <emphasis>then</emphasis> the parameter of this action decides what will be
-     sent as a replacement.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Type:</term>
-  <!-- Boolean, Parameterized, Multi-value -->
-  <listitem>
-   <para>Parameterized.</para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Parameter:</term>
-  <listitem>
-   <itemizedlist>
-    <listitem>
-     <para>
-      <quote>pattern</quote> to send a built-in checkerboard pattern image. The image is visually
-      decent, scales very well, and makes it obvious where banners were busted.
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      <quote>blank</quote> to send a built-in transparent image. This makes banners disappear
-      completely, but makes it hard to detect where <application>Privoxy</application> has blocked
-      images on a given page and complicates troubleshooting if <application>Privoxy</application>
-      has blocked innocent images, like navigation icons.
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      <quote><replaceable class="parameter">target-url</replaceable></quote> to
-      send a redirect to <replaceable class="parameter">target-url</replaceable>. You can redirect
-      to any image anywhere, even in your local filesystem via <quote>file:///</quote> URL. 
-      (But note that not all browsers support redirecting to a local file system).
-     </para>
-     <para>
-      A good application of redirects is to use special <application>Privoxy</application>-built-in
-      URLs, which send the built-in images, as <replaceable class="parameter">target-url</replaceable>.
-      This has the same visual effect as specifying <quote>blank</quote> or <quote>pattern</quote> in
-      the first place, but enables your browser to cache the replacement image, instead of requesting
-      it over and over again.
-     </para>
-    </listitem>
-   </itemizedlist>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Notes:</term>
-  <listitem>
-   <para>
-    The URLs for the built-in images are <quote>http://config.privoxy.org/send-banner?type=<replaceable
-    class="parameter">type</replaceable></quote>, where <replaceable class="parameter">type</replaceable> is
-    either <quote>blank</quote> or <quote>pattern</quote>.
-   </para>
-   <para>
-    There is a third (advanced) type, called <quote>auto</quote>. It is <emphasis>NOT</emphasis> to be
-    used in <literal>set-image-blocker</literal>, but meant for use from <link linkend="filter-file">filters</link>.
-    Auto will select the type of image that would have applied to the referring page, had it been an image.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term>Example usage:</term>
-  <listitem>
-   <para>
-    Built-in pattern:
-   </para>
-   <para>
-    <screen>+set-image-blocker{pattern}</screen>
-   </para>
-   <para>
-    Redirect to the BSD daemon:
-   </para>
-   <para>
-    <screen>+set-image-blocker{http://www.freebsd.org/gifs/dae_up3.gif}</screen>
-   </para>
-   <para>
-    Redirect to the built-in pattern for better caching:
-   </para>
-   <para>
-    <screen>+set-image-blocker{http://config.privoxy.org/send-banner?type=pattern}</screen>
-   </para>
-  </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect3>
-<title>Summary</title>
-<para>
- Note that many of these actions have the potential to cause a page to
- misbehave, possibly even not to display at all. There are many ways 
- a site designer may choose to design his site, and what HTTP header 
- content, and other criteria, he may depend on. There is no way to have hard
- and fast rules for all sites. See the <link
- linkend="ACTIONSANAT">Appendix</link> for a brief example on troubleshooting
- actions.
-</para>
-</sect3>
-</sect2>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="aliases">
-<title>Aliases</title>
-<para>
- Custom <quote>actions</quote>, known to <application>Privoxy</application>
- as <quote>aliases</quote>, can be defined by combining other actions.
- These can in turn be invoked just like the built-in actions.
- Currently, an alias name can contain any character except space, tab,
- <quote>=</quote>,
- <quote>{</quote> and <quote>}</quote>, but we <emphasis>strongly 
- recommend</emphasis> that you only use <quote>a</quote> to <quote>z</quote>,
- <quote>0</quote> to <quote>9</quote>, <quote>+</quote>, and <quote>-</quote>.
- Alias names are not case sensitive, and are not required to start with a
- <quote>+</quote> or <quote>-</quote> sign, since they are merely textually
- expanded.
-</para>
-<para>
- Aliases can be used throughout the actions file, but they <emphasis>must be
- defined in a special section at the top of the file!</emphasis>
- And there can only be one such section per actions file. Each actions file may
- have its own alias section, and the aliases defined in it are only visible
- within that file.
-</para>
-<para>
- There are two main reasons to use aliases: One is to save typing for frequently
- used combinations of actions, the other one is a gain in flexibility: If you
- decide once how you want to handle shops by defining an alias called
- <quote>shop</quote>, you can later change your policy on shops in
- <emphasis>one</emphasis> place, and your changes will take effect everywhere
- in the actions file where the <quote>shop</quote> alias is used. Calling aliases
- by their purpose also makes your actions files more readable.
-</para>
-<para>
- Currently, there is one big drawback to using aliases, though:
- <application>Privoxy</application>'s built-in web-based action file
- editor honors aliases when reading the actions files, but it expands
- them before writing. So the effects of your aliases are of course preserved,
- but the aliases themselves are lost when you edit sections that use aliases
- with it.
-</para>
-
-<para>
- Now let's define some aliases...
-</para>
-
-<para>
- <screen>
- # Useful custom aliases we can use later.
- #
- # Note the (required!) section header line and that this section
- # must be at the top of the actions file!
- #
- {{alias}}
-
- # These aliases just save typing later:
- # (Note that some already use other aliases!)
- #
- +crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- -crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- +block-as-image      = +block{Blocked image.} +handle-as-image
- allow-all-cookies   = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
-
- # These aliases define combinations of actions
- # that are useful for certain types of sites:
- #
- fragile     = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="PREVENT-COMPRESSION">prevent-compression</link>
-
- shop        = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link>
-
- # Short names for other aliases, for really lazy people ;-)
- #
- c0 = +crunch-all-cookies
- c1 = -crunch-all-cookies</screen>
-</para>
-
-<para>
- ...and put them to use. These sections would appear in the lower part of an 
- actions file and define exceptions to the default actions (as specified further
- up for the <quote>/</quote> pattern):
-</para>
-
-<para>
- <screen>
- # These sites are either very complex or very keen on
- # user data and require minimal interference to work:
- #
- {fragile}
- .office.microsoft.com
- .windowsupdate.microsoft.com
- # Gmail is really mail.google.com, not gmail.com
- mail.google.com
-
- # Shopping sites:
- # Allow cookies (for setting and retrieving your customer data)
- #           
- {shop}
- .quietpc.com
- .worldpay.com   # for quietpc.com
- mybank.example.com
-
- # These shops require pop-ups:
- #
- {-filter{all-popups} -filter{unsolicited-popups}}
-  .dabs.com
-  .overclockers.co.uk</screen>
-</para>
-
-<para>
- Aliases like <quote>shop</quote> and <quote>fragile</quote> are typically used for 
- <quote>problem</quote> sites that require more than one action to be disabled 
- in order to function properly.
-</para>
-</sect2>
-<!--
-hal stop here
--->
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="act-examples">
-<title>Actions Files Tutorial</title>
-<para>
- The above chapters have shown <link linkend="actions-file">which actions files
- there are and how they are organized</link>, how actions are <link
- linkend="actions">specified</link> and <link linkend="actions-apply">applied
- to URLs</link>, how <link linkend="af-patterns">patterns</link> work, and how to
- define and use <link linkend="aliases">aliases</link>. Now, let's look at an
- example <filename>match-all.action</filename>, <filename>default.action</filename>
- and <filename>user.action</filename> file and see how all these pieces come together:
-</para>
-
-<sect3>
-<title>match-all.action</title>
-<para>
- Remember <emphasis>all actions are disabled when matching starts</emphasis>,
- so we have to explicitly enable the ones we want.
-</para>
-
-<para>
- While the <filename>match-all.action</filename> file only contains a
- single section, it is probably the most important one. It has only one
- pattern, <quote><literal>/</literal></quote>, but this pattern
- <link linkend="af-patterns">matches all URLs</link>. Therefore, the set of
- actions used in this <quote>default</quote> section <emphasis>will
- be applied to all requests as a start</emphasis>. It can  be partly or
- wholly overridden by other actions files like <filename>default.action</filename>
- and <filename>user.action</filename>, but it will still be largely responsible
- for your overall browsing experience.
-</para>
-
-<para>
- Again, at the start of matching, all actions are disabled, so there is
- no need to disable any actions here. (Remember: a <quote>+</quote>
- preceding the action name enables the action, a <quote>-</quote> disables!).
- Also note how this long line has been made more readable by splitting it into
- multiple lines with line continuation.
-</para> 
-
-<para>
- <screen>
-{ \
- +<link linkend="CHANGE-X-FORWARDED-FOR">change-x-forwarded-for{block}</link> \
- +<link linkend="HIDE-FROM-HEADER">hide-from-header{block}</link> \
- +<link linkend="SET-IMAGE-BLOCKER">set-image-blocker{pattern}</link> \
-}
-/ # Match all URLs
- </screen>
-</para>
-
-<para>
- The default behavior is now set.
-</para>
-</sect3>
-
-<sect3>
-<title>default.action</title>
-
-<para>
- If you aren't a developer, there's no need for you to edit the
- <filename>default.action</filename> file. It is maintained by
- the &my-app; developers and if you disagree with some of the
- sections, you should overrule them in your <filename>user.action</filename>.
-</para>
-
-<para>
- Understanding the <filename>default.action</filename> file can
- help you with your <filename>user.action</filename>, though.
-</para>
-
-<para>
- The first section in this file is a special section for internal use
- that prevents older &my-app; versions from reading the file:
-</para>
-
-<para>
- <screen>
-##########################################################################
-# Settings -- Don't change! For internal Privoxy use ONLY.
-##########################################################################
-{{settings}}
-for-privoxy-version=3.0.11</screen>
-</para>
-
-<para>
- After that comes the (optional) alias section. We'll use the example
- section from the above <link linkend="aliases">chapter on aliases</link>,
- that also explains why and how aliases are used:
-</para>
-
-<para>
- <screen>
-##########################################################################
-# Aliases
-##########################################################################
-{{alias}}
-
- # These aliases just save typing later:
- # (Note that some already use other aliases!)
- #
- +crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- -crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- +block-as-image      = +block{Blocked image.} +handle-as-image
- mercy-for-cookies   = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
-
- # These aliases define combinations of actions
- # that are useful for certain types of sites:
- #
- fragile     = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link>
- shop        = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link></screen>
-</para>
-
-<para>
- The first of our specialized sections is concerned with <quote>fragile</quote>
- sites, i.e. sites that require minimum interference, because they are either
- very complex or very keen on tracking you (and have mechanisms in place that
- make them unusable for people who avoid being tracked). We will simply use
- our pre-defined <literal>fragile</literal> alias instead of stating the list
- of actions explicitly:
-</para>
-
-<para>
- <screen>
-##########################################################################
-# Exceptions for sites that'll break under the default action set:
-##########################################################################
-
-# "Fragile" Use a minimum set of actions for these sites (see alias above):
-#
-{ fragile }
-.office.microsoft.com           # surprise, surprise!
-.windowsupdate.microsoft.com
-mail.google.com</screen>
-</para>
-
-<para>
- Shopping sites are not as fragile, but they typically
- require cookies to log in, and pop-up windows for shopping
- carts or item details. Again, we'll use a pre-defined alias:
-</para>
- 
-<para>
- <screen>
-# Shopping sites:
-#
-{ shop }
-.quietpc.com 
-.worldpay.com   # for quietpc.com
-.jungle.com
-.scan.co.uk</screen>
-</para>
-
-<para>
- The <literal><link linkend="FAST-REDIRECTS">fast-redirects</link></literal>
- action, which may have been enabled in <filename>match-all.action</filename>,
- breaks some sites. So disable it for popular sites where we know it misbehaves:
-</para>
-
-<para>
- <screen>
-{ -<link linkend="FAST-REDIRECTS">fast-redirects</link> }
-login.yahoo.com
-edit.*.yahoo.com
-.google.com
-.altavista.com/.*(like|url|link):http
-.altavista.com/trans.*urltext=http
-.nytimes.com</screen>
-</para>
-
-<para>
- It is important that <application>Privoxy</application> knows which
- URLs belong to images, so that <emphasis>if</emphasis> they are to
- be blocked, a substitute image can be sent, rather than an HTML page.
- Contacting the remote site to find out is not an option, since it
- would destroy the loading time advantage of banner blocking, and it
- would feed the advertisers information about you. We can mark any
- URL as an image with the <literal><link
- linkend="handle-as-image">handle-as-image</link></literal> action,
- and marking all URLs that end in a known image file extension is a
- good start:
-</para>
-
-<para>
- <screen>
-##########################################################################
-# Images:
-##########################################################################
-
-# Define which file types will be treated as images, in case they get
-# blocked further down this file:
-#
-{ +<link linkend="HANDLE-AS-IMAGE">handle-as-image</link> }
-/.*\.(gif|jpe?g|png|bmp|ico)$</screen>
-</para>
-
-<para>
- And then there are known banner sources. They often use scripts to
- generate the banners, so it won't be visible from the URL that the
- request is for an image. Hence we block them <emphasis>and</emphasis>
- mark them as images in one go, with the help of our
- <literal>+block-as-image</literal> alias defined above. (We could of
- course just as well use <literal>+<link linkend="block">block</link>
- +<link linkend="handle-as-image">handle-as-image</link></literal> here.)
- Remember that the type of the replacement image is chosen by the
- <literal><link linkend="set-image-blocker">set-image-blocker</link></literal>
- action. Since all URLs have matched the default section with its
- <literal>+<link linkend="set-image-blocker">set-image-blocker</link>{pattern}</literal>
- action before, it still applies and needn't be repeated:
-</para>
-
-<para>
- <screen>
-# Known ad generators:
-#
-{ +block-as-image }
-ar.atwola.com 
-.ad.doubleclick.net
-.ad.*.doubleclick.net
-.a.yimg.com/(?:(?!/i/).)*$
-.a[0-9].yimg.com/(?:(?!/i/).)*$
-bs*.gsanet.com
-.qkimg.net</screen>
-</para>
-
-<para>
- One of the most important jobs of <application>Privoxy</application>
- is to block banners. Many of these can be <quote>blocked</quote>
- by the <literal><link linkend="filter">filter</link>{banners-by-size}</literal>
- action, which we enabled above, and which deletes the references to banner
- images from the pages while they are loaded, so the browser doesn't request
- them anymore, and hence they don't need to be blocked here. But this naturally
- doesn't catch all banners, and some people choose not to use filters, so we
- need a comprehensive list of patterns for banner URLs here, and apply the
- <literal><link linkend="block">block</link></literal> action to them.
-</para>
-<para>
- First comes many generic patterns, which do most of the work, by
- matching typical domain and path name components of banners. Then comes
- a list of individual patterns for specific sites, which is omitted here
- to keep the example short:
-</para>
-
-<para>
- <screen>
-##########################################################################
-# Block these fine banners:
-##########################################################################
-{ <link linkend="BLOCK">+block{Banner ads.}</link> }
-
-# Generic patterns:
-# 
-ad*.
-.*ads.
-banner?.
-count*.
-/.*count(er)?\.(pl|cgi|exe|dll|asp|php[34]?)
-/(?:.*/)?(publicite|werbung|rekla(ma|me|am)|annonse|maino(kset|nta|s)?)/
-
-# Site-specific patterns (abbreviated):
-#
-.hitbox.com</screen>
-</para>
-
-<para>
- It's quite remarkable how many advertisers actually call their banner
- servers ads.<replaceable>company</replaceable>.com, or call the directory
- in which the banners are stored simply <quote>banners</quote>. So the above
- generic patterns are surprisingly effective.
-</para>
-<para>
- But being very generic, they necessarily also catch URLs that we don't want
- to block. The pattern <literal>.*ads.</literal> e.g. catches 
- <quote>nasty-<emphasis>ads</emphasis>.nasty-corp.com</quote> as intended,
- but also <quote>downlo<emphasis>ads</emphasis>.sourcefroge.net</quote> or
- <quote><emphasis>ads</emphasis>l.some-provider.net.</quote> So here come some
- well-known exceptions to the <literal>+<link linkend="BLOCK">block</link></literal>
- section above.
-</para>
-<para>
- Note that these are exceptions to exceptions from the default! Consider the URL
- <quote>downloads.sourcefroge.net</quote>: Initially, all actions are deactivated,
- so it wouldn't get blocked. Then comes the defaults section, which matches the
- URL, but just deactivates the <literal><link linkend="BLOCK">block</link></literal>
- action once again. Then it matches <literal>.*ads.</literal>, an exception to the
- general non-blocking policy, and suddenly
- <literal><link linkend="BLOCK">+block</link></literal> applies. And now, it'll match
- <literal>.*loads.</literal>, where <literal><link linkend="BLOCK">-block</link></literal>
- applies, so (unless it matches <emphasis>again</emphasis> further down) it ends up
- with no <literal><link linkend="BLOCK">block</link></literal> action applying.
-</para>
-
-<para>
- <screen>
-##########################################################################
-# Save some innocent victims of the above generic block patterns:
-##########################################################################
-
-# By domain:
-# 
-{ -<link linkend="BLOCK">block</link> }
-adv[io]*.  # (for advogato.org and advice.*)
-adsl.      # (has nothing to do with ads)
-adobe.     # (has nothing to do with ads either)
-ad[ud]*.   # (adult.* and add.*)
-.edu       # (universities don't host banners (yet!))
-.*loads.   # (downloads, uploads etc)
-
-# By path:
-#
-/.*loads/
-
-# Site-specific:
-#
-www.globalintersec.com/adv # (adv = advanced)
-www.ugu.com/sui/ugu/adv</screen>
-</para>
-
-<para>
- Filtering source code can have nasty side effects,
- so make an exception for our friends at sourceforge.net,
- and all paths with <quote>cvs</quote> in them. Note that
- <literal>-<link linkend="FILTER">filter</link></literal>
- disables <emphasis>all</emphasis> filters in one fell swoop!
-</para>
-
-<para>
- <screen>
-# Don't filter code!
-#
-{ -<link linkend="FILTER">filter</link> }
-/(.*/)?cvs
-bugzilla.
-developer.
-wiki.
-.sourceforge.net</screen>
-</para>
-
-<para>
- The actual <filename>default.action</filename> is of course much more
- comprehensive, but we hope this example made clear how it works.
-</para>
-
-</sect3>
-
-<sect3><title>user.action</title>
-
-<para>
- So far we are painting with a broad brush by setting general policies,
- which would be a reasonable starting point for many people. Now, 
- you might want to be more specific and have customized rules that
- are more suitable to your personal habits and preferences. These would
- be for narrowly defined situations like your ISP or your bank, and should
- be placed in <filename>user.action</filename>, which is parsed after all other 
- actions files and hence has the last word, over-riding any previously
- defined actions. <filename>user.action</filename> is also a 
- <emphasis>safe</emphasis> place for your personal settings, since
- <filename>default.action</filename> is actively maintained by the
- <application>Privoxy</application> developers and you'll probably want
- to install updated versions from time to time.
-</para>
-
-<para>
- So let's look at a few examples of things that one might typically do in
- <filename>user.action</filename>: 
-</para>
-
-
-<!-- brief sample user.action here -->
-
-<para>
- <screen>
-# My user.action file. &lt;fred@xxxxxxxxxxx&gt;</screen>
-</para>
-
-<para>
- As <link linkend="aliases">aliases</link> are local to the actions
- file that they are defined in, you can't use the ones from
- <filename>default.action</filename>, unless you repeat them here:
-</para>
-
-<para>
- <screen>
-# Aliases are local to the file they are defined in.
-# (Re-)define aliases for this file:
-#
-{{alias}}
-# 
-# These aliases just save typing later, and the alias names should 
-# be self explanatory.
-#
-+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
--crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
- allow-all-cookies  = -crunch-all-cookies -session-cookies-only
- allow-popups       = -filter{all-popups}
-+block-as-image     = +block{Blocked as image.} +handle-as-image
--block-as-image     = -block
-
-# These aliases define combinations of actions that are useful for
-# certain types of sites:
-#
-fragile     = -block -crunch-all-cookies -filter -fast-redirects -hide-referrer
-shop        = -crunch-all-cookies allow-popups
-
-# Allow ads for selected useful free sites:
-#
-allow-ads   = -block -filter{banners-by-size} -filter{banners-by-link}
-
-# Alias for specific file types that are text, but might have conflicting
-# MIME types. We want the browser to force these to be text documents.
-handle-as-text = -<link linkend="FILTER">filter</link> +-<link linkend="content-type-overwrite">content-type-overwrite{text/plain}</link> +-<link linkend="FORCE-TEXT-MODE">force-text-mode</link> -<link linkend="HIDE-CONTENT-DISPOSITION">hide-content-disposition</link></screen>
-
-</para>
-
-<para>
- Say you have accounts on some sites that you visit regularly, and
- you don't want to have to log in manually each time. So you'd like
- to allow persistent cookies for these sites. The
- <literal>allow-all-cookies</literal> alias defined above does exactly
- that, i.e. it disables crunching of cookies in any direction, and the 
- processing of cookies to make them only temporary.
-</para>
-
-<para>
- <screen>
-{ allow-all-cookies }
- sourceforge.net
- .yahoo.com
- .msdn.microsoft.com
- .redhat.com</screen>
-</para>
-
-<para>
- Your bank is allergic to some filter, but you don't know which, so you disable them all:
-</para>
-
-<para>
- <screen>
-{ -<link linkend="FILTER">filter</link> }
- .your-home-banking-site.com</screen>
-</para>
-
-<para>
- Some file types you may not want to filter for various reasons:
-</para>
-
-<para>
- <screen>
-# Technical documentation is likely to contain strings that might
-# erroneously get altered by the JavaScript-oriented filters:
-#
-.tldp.org
-/(.*/)?selfhtml/
-
-# And this stupid host sends streaming video with a wrong MIME type,
-# so that Privoxy thinks it is getting HTML and starts filtering:
-#
-stupid-server.example.com/</screen>
-</para>
-
-<para>
- Example of a simple <link linkend="BLOCK">block</link> action. Say you've
- seen an ad on your favourite page on example.com that you want to get rid of.
- You have right-clicked the image, selected <quote>copy image location</quote>
- and pasted the URL below while removing the leading http://, into a 
- <literal>{ +block{} }</literal> section. Note that <literal>{ +handle-as-image
- }</literal> need not be specified, since all URLs ending in
- <literal>.gif</literal> will be tagged as images by the general rules as set
- in default.action anyway:
-</para>
-
-<para>
- <screen>
-{ +<link linkend="BLOCK">block</link>{Nasty ads.} }
- www.example.com/nasty-ads/sponsor\.gif
- another.example.net/more/junk/here/</screen>
-</para>
-
-<para>
- The URLs of dynamically generated banners, especially from large banner
- farms, often don't use the well-known image file name extensions, which
- makes it impossible for <application>Privoxy</application> to guess
- the file type just by looking at the URL. 
- You can use the <literal>+block-as-image</literal> alias defined above for
- these cases.
- Note that objects which match this rule but then turn out NOT to be an
- image are typically rendered as a <quote>broken image</quote> icon by the
- browser. Use cautiously.
-</para>
-
-<para>
- <screen>
-{ +block-as-image }
- .doubleclick.net
- .fastclick.net
- /Realmedia/ads/
- ar.atwola.com/</screen>
-</para>
-
-<para>
- Now you noticed that the default configuration breaks Forbes Magazine,
- but you were too lazy to find out which action is the culprit, and you
- were again too lazy to give <link linkend="contact">feedback</link>, so
- you just used the <literal>fragile</literal> alias on the site, and
- -- <emphasis>whoa!</emphasis> -- it worked. The <literal>fragile</literal>
- aliases disables those actions that are most likely to break a site. Also,
- good for testing purposes to see if it is <application>Privoxy</application>
- that is causing the problem or not. We later find other regular sites 
- that misbehave, and add those to our personalized list of troublemakers:
-</para>
-
-<para>
-<screen>
-{ fragile }
- .forbes.com
- webmail.example.com
- .mybank.com</screen>
-</para>
-
-<para>
- You like the <quote>fun</quote> text replacements in <filename>default.filter</filename>,
- but it is disabled in the distributed actions file.
- So you'd like to turn it on in your private,
- update-safe config, once and for all:
-</para>
-
-<para>
-<screen>
-{ +<link linkend="filter-fun">filter{fun}</link> }
- / # For ALL sites!</screen>
-</para>
-
-<para>
- Note that the above is not really a good idea: There are exceptions
- to the filters in <filename>default.action</filename> for things that
- really shouldn't be filtered, like code on CVS->Web interfaces. Since
- <filename>user.action</filename> has the last word, these exceptions
- won't be valid for the <quote>fun</quote> filtering specified here.
-</para>
-
-<para>
- You might also worry about how your favourite free websites are
- funded, and find that they rely on displaying banner advertisements
- to survive. So you might want to specifically allow banners for those
- sites that you feel provide value to you:
-</para>
-
-<para>
-<screen>
-{ allow-ads }
- .sourceforge.net
- .slashdot.org
- .osdn.net</screen>   
-</para>
-
-<para>
- Note that <literal>allow-ads</literal> has been aliased to 
- <literal>-<link linkend="block">block</link></literal>, 
- <literal>-<link linkend="filter-banners-by-size">filter{banners-by-size}</link></literal>, and 
- <literal>-<link linkend="filter-banners-by-link">filter{banners-by-link}</link></literal> above.
-</para>
-
-<para>
- Invoke another alias here to force an over-ride of the MIME type <literal>
- application/x-sh</literal> which typically would open a download type 
- dialog. In my case, I want to look at the shell script, and then I can save
- it should I choose to.
-</para>
-
-<para>
-<screen>
-{ handle-as-text }
- /.*\.sh$</screen>   
-</para>
-
-<para>
- <filename>user.action</filename> is generally the best place to define
- exceptions and additions to the default policies of
- <filename>default.action</filename>. Some actions are safe to have their
- default policies set here though. So let's set a default policy to have a
- <quote>blank</quote> image as opposed to the checkerboard pattern for
- <emphasis>ALL</emphasis> sites. <quote>/</quote> of course matches all URL
- paths and patterns:
-</para>
-
-<para>
-<screen>
-{ +<link linkend="set-image-blocker">set-image-blocker{blank}</link> }
-/ # ALL sites</screen>
-</para>
-
-</sect3>
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-<!--   ~~~~~~~~       New section Header    ~~~~~~~~~     -->
-
-<sect1 id="filter-file">
-<title>Filter Files</title>
-
-<para>
- On-the-fly text substitutions need
- to be defined in a <quote>filter file</quote>. Once defined, they 
- can then be invoked as an <quote>action</quote>.
-</para>
-
-<para>
- &my-app; supports three different filter actions:
- <literal><link linkend="filter">filter</link></literal> to
- rewrite the content that is send to the client,
- <literal><link linkend="client-header-filter">client-header-filter</link></literal>
- to rewrite headers that are send by the client, and
- <literal><link linkend="server-header-filter">server-header-filter</link></literal>
- to rewrite headers that are send by the server.
-</para>
-
-<para>
- &my-app; also supports two tagger actions:
- <literal><link linkend="client-header-tagger">client-header-tagger</link></literal>
- and
- <literal><link linkend="server-header-tagger">server-header-tagger</link></literal>.
- Taggers and filters use the same syntax in the filter files, the difference
- is that taggers don't modify the text they are filtering, but use a rewritten
- version of the filtered text as tag. The tags can then be used to change the
- applying actions through sections with <link linkend="tag-pattern">tag-patterns</link>.
-</para>
-
-
-<para>
- Multiple filter files can be defined through the <literal> <link
- linkend="filterfile">filterfile</link></literal> config directive. The filters
- as supplied by the developers are located in
- <filename>default.filter</filename>. It is recommended that any locally
- defined or modified filters go in a separately defined file such as
- <filename>user.filter</filename>.
- </para>
-
-<para>
- Common tasks for content filters are to eliminate common annoyances in
- HTML and JavaScript, such as pop-up windows,
- exit consoles, crippled windows without navigation tools, the
- infamous &lt;BLINK&gt; tag etc, to suppress images with certain
- width and height attributes (standard banner sizes or web-bugs),
- or just to have fun.
-</para>
-
-<para>
- Enabled content filters are applied to any content whose
- <quote>Content Type</quote> header is recognised as a sign
- of text-based content, with the exception of <literal>text/plain</literal>.
- Use the <link linkend="FORCE-TEXT-MODE">force-text-mode</link> action
- to also filter other content.
-</para>
-
-<para>
- Substitutions are made at the source level, so if you want to <quote>roll
- your own</quote> filters, you should first be familiar with HTML syntax, 
- and, of course, regular expressions.
-</para>
-
-<para>
- Just like the <link linkend="actions-file">actions files</link>, the
- filter file is organized in sections, which are called <emphasis>filters</emphasis>
- here. Each filter consists of a heading line, that starts with one of the
- <emphasis>keywords</emphasis> <literal>FILTER:</literal>,
- <literal>CLIENT-HEADER-FILTER:</literal> or <literal>SERVER-HEADER-FILTER:</literal>
- followed by the filter's <emphasis>name</emphasis>, and a short (one line) 
- <emphasis>description</emphasis> of what it does. Below that line
- come the <emphasis>jobs</emphasis>, i.e. lines that define the actual
- text substitutions. By convention, the name of a filter
- should describe what the filter <emphasis>eliminates</emphasis>. The
- comment is used in the <ulink url="http://config.privoxy.org/";>web-based
- user interface</ulink>.
-</para>
-
-<para>
- Once a filter called <replaceable>name</replaceable> has been defined
- in the filter file, it can be invoked by using an action of the form
- +<literal><link linkend="filter">filter</link>{<replaceable>name</replaceable>}</literal>
- in any <link linkend="actions-file">actions file</link>.
-</para>
- 
-<para>
- Filter definitions start with a header line that contains the filter
- type, the filter name and the filter description.
- A content filter header line for a filter called <quote>foo</quote> could look
- like this:
-</para>
-
-<para>
- <screen>FILTER: foo Replace all "foo" with "bar"</screen>
-</para>
-
-<para>
- Below that line, and up to the next header line, come the jobs that
- define what text replacements the filter executes. They are specified
- in a syntax that imitates <ulink url="http://www.perl.org/";>Perl</ulink>'s
- <literal>s///</literal> operator. If you are familiar with Perl, you
- will find this to be quite intuitive, and may want to look at the
- PCRS documentation for the subtle differences to Perl behaviour. Most
- notably, the non-standard option letter <literal>U</literal> is supported,
- which turns the default to ungreedy matching.
-</para>
-
-<para>
- If you are new to 
-  <ulink url="http://en.wikipedia.org/wiki/Regular_expressions";><quote>Regular
-  Expressions</quote></ulink>, you might want to take a look at
- the <link linkend="regex">Appendix on regular expressions</link>, and
- see the <ulink url="http://perldoc.perl.org/perlre.html";>Perl
- manual</ulink> for
- <ulink url="http://perldoc.perl.org/perlop.html";>the 
- <literal>s///</literal> operator's syntax</ulink> and <ulink
- url="http://perldoc.perl.org/perlre.html";>Perl-style regular
- expressions</ulink> in general.
- The below examples might also help to get you started.
-</para>
-
-
-<!--   ~~~~~~~~       New section Header    ~~~~~~~~~     -->
-
-<sect2><title>Filter File Tutorial</title>
-<para>
- Now, let's complete our <quote>foo</quote> content filter. We have already defined
- the heading, but the jobs are still missing. Since all it does is to replace
- <quote>foo</quote> with <quote>bar</quote>, there is only one (trivial) job
- needed:
-</para>
-
-<para>
- <screen>s/foo/bar/</screen>
-</para>
-
-<para>
- But wait! Didn't the comment say that <emphasis>all</emphasis> occurrences
- of <quote>foo</quote> should be replaced? Our current job will only take
- care of the first <quote>foo</quote> on each page. For global substitution,
- we'll need to add the <literal>g</literal> option:
-</para>
-
-<para>
- <screen>s/foo/bar/g</screen>
-</para>
-
-<para>
- Our complete filter now looks like this:
-</para>
-<para>
- <screen>FILTER: foo Replace all "foo" with "bar"
-s/foo/bar/g</screen>
-</para>
-
-<para>
- Let's look at some real filters for more interesting examples. Here you see
- a filter that protects against some common annoyances that arise from JavaScript
- abuse. Let's look at its jobs one after the other:
-</para>
-
-
-<para>
- <screen>
-FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse
-
-# Get rid of JavaScript referrer tracking. Test page: http://www.randomoddness.com/untitled.htm
-#
-s|(&lt;script.*)document\.referrer(.*&lt;/script&gt;)|$1"Not Your Business!"$2|Usg</screen>
-</para>
-
-<para>
- Following the header line and a comment, you see the job. Note that it uses
- <literal>|</literal> as the delimiter instead of <literal>/</literal>, because
- the pattern contains a forward slash, which would otherwise have to be escaped
- by a backslash (<literal>\</literal>).
-</para>
-
-<para>
- Now, let's examine the pattern: it starts with the text <literal>&lt;script.*</literal>
- enclosed in parentheses. Since the dot matches any character, and <literal>*</literal>
- means: <quote>Match an arbitrary number of the element left of myself</quote>, this
- matches <quote>&lt;script</quote>, followed by <emphasis>any</emphasis> text, i.e.
- it matches the whole page, from the start of the first &lt;script&gt; tag.
-</para>
-
-<para>
- That's more than we want, but the pattern continues: <literal>document\.referrer</literal>
- matches only the exact string <quote>document.referrer</quote>. The dot needed to
- be <emphasis>escaped</emphasis>, i.e. preceded by a backslash, to take away its
- special meaning as a joker, and make it just a regular dot. So far, the meaning is:
- Match from the start of the first &lt;script&gt; tag in a the page, up to, and including,
- the text <quote>document.referrer</quote>, if <emphasis>both</emphasis> are present
- in the page (and appear in that order).
-</para>
-
-<para>
- But there's still more pattern to go. The next element, again enclosed in parentheses,
- is <literal>.*&lt;/script&gt;</literal>. You already know what <literal>.*</literal>
- means, so the whole pattern translates to: Match from the start of the first  &lt;script&gt;
- tag in a page to the end of the last &lt;script&gt; tag, provided that the text
- <quote>document.referrer</quote> appears somewhere in between.
-</para>
-
-<para>
- This is still not the whole story, since we have ignored the options and the parentheses:
- The portions of the page matched by sub-patterns that are enclosed in parentheses, will be
- remembered and be available through the variables <literal>$1, $2, ...</literal> in
- the substitute. The <literal>U</literal> option switches to ungreedy matching, which means
- that the first <literal>.*</literal> in the pattern will only <quote>eat up</quote> all
- text in between <quote>&lt;script</quote> and the <emphasis>first</emphasis> occurrence
- of <quote>document.referrer</quote>, and that the second <literal>.*</literal> will
- only span the text up to the <emphasis>first</emphasis> <quote>&lt;/script&gt;</quote>
- tag. Furthermore, the <literal>s</literal> option says that the match may span
- multiple lines in the page, and the <literal>g</literal> option again means that the
- substitution is global.
-</para>
-
-<para>
- So, to summarize, the pattern means: Match all scripts that contain the text
- <quote>document.referrer</quote>. Remember the parts of the script from
- (and including) the start tag up to (and excluding) the string
- <quote>document.referrer</quote> as <literal>$1</literal>, and the part following
- that string, up to and including the closing tag, as <literal>$2</literal>.
-</para>
-
-<para>
- Now the pattern is deciphered, but wasn't this about substituting things? So
- lets look at the substitute: <literal>$1"Not Your Business!"$2</literal> is
- easy to read: The text remembered as <literal>$1</literal>, followed by 
- <literal>"Not Your Business!"</literal> (<emphasis>including</emphasis>
- the quotation marks!), followed by the text remembered as <literal>$2</literal>.
- This produces an exact copy of the original string, with the middle part
- (the <quote>document.referrer</quote>) replaced by <literal>"Not Your
- Business!"</literal>.
-</para>
-
-<para>
- The whole job now reads: Replace <quote>document.referrer</quote> by
- <literal>"Not Your Business!"</literal> wherever it appears inside a
- &lt;script&gt tag. Note that this job won't break JavaScript syntax,
- since both the original and the replacement are syntactically valid
- string objects. The script just won't have access to the referrer
- information anymore.
-</para>
-
-<para>
- We'll show you two other jobs from the JavaScript taming department, but
- this time only point out the constructs of special interest:
-</para>
-
-<para>
- <screen>
-# The status bar is for displaying link targets, not pointless blahblah
-#
-s/window\.status\s*=\s*(['"]).*?\1/dUmMy=1/ig</screen>
-</para>
-
-<para>
- <literal>\s</literal> stands for whitespace characters (space, tab, newline,
- carriage return, form feed), so that <literal>\s*</literal> means: <quote>zero
- or more whitespace</quote>. The <literal>?</literal> in <literal>.*?</literal>
- makes this matching of arbitrary text ungreedy. (Note that the <literal>U</literal>
- option is not set). The <literal>['"]</literal> construct means: <quote>a single
- <emphasis>or</emphasis> a double quote</quote>. Finally, <literal>\1</literal> is
- a back-reference to the first parenthesis just like <literal>$1</literal> above,
- with the difference that in the <emphasis>pattern</emphasis>, a backslash indicates
- a back-reference, whereas in the <emphasis>substitute</emphasis>, it's the dollar.
-</para>
-
-<para>
- So what does this job do? It replaces assignments of single- or double-quoted
- strings to the <quote>window.status</quote> object with a dummy assignment
- (using a variable name that is hopefully odd enough not to conflict with
- real variables in scripts). Thus, it catches many cases where e.g. pointless
- descriptions are displayed in the status bar instead of the link target when
- you move your mouse over links.
-</para>
-
-<para>
- <screen>
-# Kill OnUnload popups. Yummy. Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html
-#
-s/(&lt;body [^&gt;]*)onunload(.*&gt;)/$1never$2/iU</screen>
-</para>
-
-<para>
- Including the
- <ulink url="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Events-eventgroupings-htmlevents";>OnUnload
- event binding</ulink> in the HTML DOM was a <emphasis>CRIME</emphasis>.
- When I close a browser window, I want it to close and die. Basta.
- This job replaces the <quote>onunload</quote> attribute in
- <quote>&lt;body&gt</quote> tags with the dummy word <literal>never</literal>.
- Note that the <literal>i</literal> option makes the pattern matching
- case-insensitive. Also note that ungreedy matching alone doesn't always guarantee
- a minimal match: In the first parenthesis, we had to use <literal>[^&gt;]*</literal>
- instead of <literal>.*</literal> to prevent the match from exceeding the 
- &lt;body&gt tag if it doesn't contain <quote>OnUnload</quote>, but the page's
- content does.
-</para>
-
-<para>
- The last example is from the fun department:
-</para>
-
-<para>
- <screen>
-FILTER: fun Fun text replacements
-
-# Spice the daily news:
-#
-s/microsoft(?!\.com)/MicroSuck/ig</screen>
-</para>
-
-<para>
- Note the <literal>(?!\.com)</literal> part (a so-called negative lookahead)
- in the job's pattern, which means: Don't match, if the string 
- <quote>.com</quote> appears directly following <quote>microsoft</quote>
- in the page. This prevents links to microsoft.com from being trashed, while
- still replacing the word everywhere else.
-</para>
-
-<para>
- <screen>
-# Buzzword Bingo (example for extended regex syntax)
-#
-s* industry[ -]leading \
-|  cutting[ -]edge \
-|  customer[ -]focused \
-|  market[ -]driven \
-|  award[ -]winning # Comments are OK, too! \
-|  high[ -]performance \
-|  solutions[ -]based \
-|  unmatched \
-|  unparalleled \
-|  unrivalled \
-*&lt;font color="red"&gt;&lt;b&gt;BINGO!&lt;/b&gt;&lt;/font&gt; \
-*igx</screen>
-</para>
-
-<para>
- The <literal>x</literal> option in this job turns on extended syntax, and allows for
- e.g. the liberal use of (non-interpreted!) whitespace for nicer formatting. 
-</para>
-
-<para>
- You get the idea?
-</para>
-</sect2>
-
-<!--   ~~~~~~~~       New section Header    ~~~~~~~~~     -->
-
-<sect2 id="predefined-filters"><title>The Pre-defined Filters</title>
-
-<!-- 
-
- Note each filter is also listed in the +filter action section above. Please
- keep these listings in sync.
- 
--->
-
-<para>
-The distribution <filename>default.filter</filename> file contains a selection of
-pre-defined filters for your convenience:
-</para>
-
-<variablelist>
- <varlistentry>
-  <term><emphasis>js-annoyances</emphasis></term>
-  <listitem>
-   <para>
-    The purpose of this filter is to get rid of particularly annoying JavaScript abuse.
-    To that end, it
-   <itemizedlist>
-    <listitem>
-     <para>
-      replaces JavaScript references to the browser's referrer information
-      with the string "Not Your Business!". This compliments the <literal><link
-      linkend="hide-referrer">hide-referrer</link></literal> action on the content level.
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      removes the bindings to the DOM's
-      <ulink url="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Events-eventgroupings-htmlevents";>unload
-      event</ulink> which we feel has no right to exist and is responsible for most <quote>exit consoles</quote>, i.e.
-      nasty windows that pop up when you close another one.
-     </para>
-    </listitem>
-    <listitem>
-     <para>
-      removes code that causes new windows to be opened with undesired properties, such as being
-      full-screen, non-resizeable, without location, status or menu bar etc.
-     </para>
-    </listitem>
-   </itemizedlist>
-   </para>
-   <para>
-    Use with caution. This is an aggressive filter, and can break sites that 
-    rely heavily on JavaScript.
-   </para>
-  </listitem>
- </varlistentry>
- 
- <varlistentry>
-  <term><emphasis>js-events</emphasis></term>
-  <listitem>
-   <para>
-    This is a very radical measure. It removes virtually all JavaScript event bindings, which
-    means that scripts can not react to user actions such as mouse movements or clicks, window
-    resizing etc, anymore. Use with caution!
-   </para>
-   <para>
-    We <emphasis>strongly discourage</emphasis> using this filter as a default since it breaks
-    many legitimate scripts. It is meant for use only on extra-nasty sites (should you really
-    need to go there).
-   </para>
-  </listitem>
- </varlistentry>
-
-<varlistentry>
-  <term><emphasis>html-annoyances</emphasis></term>
-  <listitem>
-   <para>
-    This filter will undo many common instances of HTML based abuse.
-   </para>
-   <para>
-    The <literal>BLINK</literal> and <literal>MARQUEE</literal> tags 
-    are neutralized (yeah baby!), and browser windows will be created as
-    resizeable (as of course they should be!), and will have location,
-    scroll and menu bars -- even if specified otherwise.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>content-cookies</emphasis></term>
-  <listitem>
-   <para>
-    Most cookies are set in the HTTP dialog, where they can be intercepted
-    by the
-    <literal><link linkend="crunch-incoming-cookies">crunch-incoming-cookies</link></literal>
-    and <literal><link linkend="crunch-outgoing-cookies">crunch-outgoing-cookies</link></literal>
-    actions. But web sites increasingly make use of HTML meta tags and JavaScript
-    to sneak cookies to the browser on the content level.
-   </para>
-   <para>
-    This filter disables most HTML and JavaScript code that reads or sets
-    cookies. It cannot detect all clever uses of these types of code, so it 
-    should not be relied on as an absolute fix. Use it wherever you would also
-    use the cookie crunch actions. 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>refresh tags</emphasis></term>
-  <listitem>
-   <para>
-    Disable any refresh tags if the interval is greater than nine seconds (so 
-    that redirections done via refresh tags are not destroyed). This is useful 
-    for dial-on-demand setups, or for those who find this HTML feature
-    annoying.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>unsolicited-popups</emphasis></term>
-  <listitem>
-   <para>
-    This filter attempts to prevent only <quote>unsolicited</quote> pop-up 
-    windows from opening, yet still allow pop-up windows that the user 
-    has explicitly chosen to open. It was added in version 3.0.1, 
-    as an improvement over earlier such filters.
-   </para>
-   <para>
-    Technical note: The filter works by redefining the window.open JavaScript
-    function to a dummy function, <literal>PrivoxyWindowOpen()</literal>,
-    during the loading and rendering phase of each HTML page access, and
-    restoring the function afterward.
-   </para>
-   <para>
-    This is recommended only for browsers that cannot perform this function
-    reliably themselves. And be aware that some sites require such windows 
-    in order to function normally. Use with caution.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>all-popups</emphasis></term>
-  <listitem>
-   <para>
-    Attempt to prevent <emphasis>all</emphasis> pop-up windows from opening.
-    Note this should be used with even more discretion than the above, since
-    it is more likely to break some sites that require pop-ups for normal
-    usage. Use with caution.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>img-reorder</emphasis></term>
-  <listitem>
-   <para>
-    This is a helper filter that has no value if used alone. It makes the
-    <literal>banners-by-size</literal> and <literal>banners-by-link</literal>
-    (see below) filters more effective and should be enabled together with them.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>banners-by-size</emphasis></term>
-  <listitem>
-   <para>
-    This filter removes image tags purely based on what size they are. Fortunately 
-    for us, many ads and banner images tend to conform to certain standardized
-    sizes, which makes this filter quite effective for ad stripping purposes.
-   </para>
-   <para>
-    Occasionally this filter will cause false positives on images that are not ads,
-    but just happen to be of one of the standard banner sizes.
-   </para>
-   <para>
-    Recommended only for those who require extreme ad blocking. The default 
-    block rules should catch 95+% of all ads <emphasis>without</emphasis> this filter enabled.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>banners-by-link</emphasis></term>
-  <listitem>
-   <para>
-    This is an experimental filter that attempts to kill any banners if 
-    their URLs seem to point to known or suspected click trackers. It is currently
-    not of much value and is not recommended for use by default.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>webbugs</emphasis></term>
-  <listitem>
-   <para>
-    Webbugs are small, invisible images (technically 1X1 GIF images), that 
-    are used to track users across websites, and collect information on them.
-    As an HTML page is loaded by the browser, an embedded image tag causes the
-    browser to contact a third-party site, disclosing the tracking information
-    through the requested URL and/or cookies for that third-party domain, without
-    the user ever becoming aware of the interaction with the third-party site.
-    HTML-ized spam also uses a similar technique to verify email addresses.
-   </para>
-   <para>
-    This filter removes the HTML code that loads such <quote>webbugs</quote>.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>tiny-textforms</emphasis></term>
-  <listitem>
-   <para>
-    A rather special-purpose filter that can be used to enlarge textareas (those
-    multi-line text boxes in web forms) and turn off hard word wrap in them. 
-    It was written for the sourceforge.net tracker system where such boxes are
-    a nuisance, but it can be handy on other sites, too.
-   </para>
-   <para>
-    It is not recommended to use this filter as a default.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>jumping-windows</emphasis></term>
-  <listitem>
-   <para>
-    Many consider windows that move, or resize themselves to be abusive. This filter
-    neutralizes the related JavaScript code. Note that some sites might not display
-    or behave as intended when using this filter. Use with caution.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>frameset-borders</emphasis></term>
-  <listitem>
-   <para>
-    Some web designers seem to assume that everyone in the world will view their
-    web sites using the same browser brand and version, screen resolution etc,
-    because only that assumption could explain why they'd use static frame sizes,
-    yet prevent their frames from being resized by the user, should they be too
-    small to show their whole content.
-   </para>
-   <para>
-    This filter removes the related HTML code. It should only be applied to sites
-    which need it.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>demoronizer</emphasis></term>
-  <listitem>
-   <para>
-    Many Microsoft products that generate HTML use non-standard extensions (read:
-    violations) of the ISO 8859-1 aka Latin-1 character set. This can cause those
-    HTML documents to display with errors on standard-compliant platforms. 
-   </para>
-   <para>
-    This filter translates the MS-only characters into Latin-1 equivalents. 
-    It is not necessary when using MS products, and will cause corruption of  
-    all documents that use 8-bit character sets other than Latin-1. It's mostly
-    worthwhile for Europeans on non-MS platforms, if weird garbage characters
-    sometimes appear on some pages, or user agents that don't correct for this on 
-    the fly.
-<!--
-    My version of Mozilla (ancient) shows litte square boxes for quote
-    characters, and apostrophes on moronized pages. So many pages have this, I
-    can read them fine now. HB 08/27/06
---> 
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>shockwave-flash</emphasis></term>
-  <listitem>
-   <para>
-    A filter for shockwave haters. As the name suggests, this filter strips code
-    out of web pages that is used to embed shockwave flash objects. 
-   </para>
-   <para>
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>quicktime-kioskmode</emphasis></term>
-  <listitem>
-   <para>
-    Change HTML code that embeds Quicktime objects so that kioskmode, which
-    prevents saving, is disabled.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>fun</emphasis></term>
-  <listitem>
-   <para>
-    Text replacements for subversive browsing fun. Make fun of your favorite
-    Monopolist or play buzzword bingo.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>crude-parental</emphasis></term>
-  <listitem>
-   <para>
-    A demonstration-only filter that shows how <application>Privoxy</application>
-    can be used to delete web content on a keyword basis.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>ie-exploits</emphasis></term>
-  <listitem>
-   <para>
-    An experimental collection of text replacements to disable malicious HTML and JavaScript
-    code that exploits known security holes in Internet Explorer.
-   </para>
-   <para>
-    Presently, it only protects against Nimda and a cross-site scripting bug, and
-    would need active maintenance to provide more substantial protection.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>site-specifics</emphasis></term>
-  <listitem>
-   <para>
-    Some web sites have very specific problems, the cure for which doesn't apply
-    anywhere else, or could even cause damage on other sites.
-   </para>
-   <para>
-    This is a collection of such site-specific cures which should only be applied
-    to the sites they were intended for, which is what the supplied
-    <filename>default.action</filename> file does. Users shouldn't need to change
-    anything regarding this filter.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>google</emphasis></term>
-  <listitem>
-   <para>
-    A CSS based block for Google text ads. Also removes a width limitation
-    and the toolbar advertisement.
-   </para>
-  </listitem>
- </varlistentry>
- 
-  <varlistentry>
-  <term><emphasis>yahoo</emphasis></term>
-  <listitem>
-   <para>
-    Another CSS based block, this time for Yahoo text ads. And removes 
-    a width limitation as well.
-   </para>
-  </listitem>
- </varlistentry>
-
-  <varlistentry>
-  <term><emphasis>msn</emphasis></term>
-  <listitem>
-   <para>
-    Another CSS based block, this time for MSN text ads. And removes 
-    tracking URLs, as well as a width limitation.
-   </para>
-  </listitem>
- </varlistentry>
-
- <varlistentry>
-  <term><emphasis>blogspot</emphasis></term>
-  <listitem>
-   <para>
-    Cleans up some Blogspot blogs. Read the fine print before using this one!
-   </para>
-   <para>
-    This filter also intentionally removes some navigation stuff and sets the
-    page width to 100%. As a result, some rounded <quote>corners</quote> would
-    appear to early or not at all and as fixing this would require a browser
-    that understands background-size (CSS3), they are removed instead.
-   </para>
-  </listitem>
- </varlistentry>
-
-  <varlistentry>
-  <term><emphasis>xml-to-html</emphasis></term>
-  <listitem>
-   <para>
-    Server-header filter to change the Content-Type from xml to html.
-   </para>
-  </listitem>
- </varlistentry>
- 
-  <varlistentry>
-  <term><emphasis>html-to-xml</emphasis></term>
-  <listitem>
-   <para>
-    Server-header filter to change the Content-Type from html to xml.
-   </para>
-  </listitem>
- </varlistentry>
-
-  <varlistentry>
-  <term><emphasis>no-ping</emphasis></term>
-  <listitem>
-   <para>
-    Removes the non-standard <literal>ping</literal> attribute from
-    anchor and area HTML tags.
-   </para>
-  </listitem>
- </varlistentry>
-
-  <varlistentry>
-  <term><emphasis>hide-tor-exit-notation</emphasis></term>
-  <listitem>
-   <para>
-    Client-header filter to remove the <command>Tor</command> exit node notation
-    found in Host and Referer headers.
-   </para>
-   <para>
-    If &my-app; and <command>Tor</command> are chained and &my-app;
-    is configured to use socks4a, one can use <quote>http://www.example.org.foobar.exit/</quote>
-    to access the host <quote>www.example.org</quote> through the
-    <command>Tor</command> exit node <quote>foobar</quote>.
-   </para>
-   <para>
-    As the HTTP client isn't aware of this notation, it treats the
-    whole string <quote>www.example.org.foobar.exit</quote> as host and uses it
-    for the <quote>Host</quote> and <quote>Referer</quote> headers. From the
-    server's point of view the resulting headers are invalid and can cause problems.
-   </para>
-   <para>
-    An invalid <quote>Referer</quote> header can trigger <quote>hot-linking</quote>
-    protections, an invalid <quote>Host</quote> header will make it impossible for
-    the server to find the right vhost (several domains hosted on the same IP address).
-   </para>
-   <para>
-    This client-header filter removes the <quote>foo.exit</quote> part in those headers
-    to prevent the mentioned problems. Note that it only modifies
-    the HTTP headers, it doesn't make it impossible for the server
-    to detect your <command>Tor</command> exit node based on the IP address
-    the request is coming from.
-   </para>
-  </listitem>
- </varlistentry>
-
-<!--
- <varlistentry>
-  <term><emphasis> </emphasis></term>
-  <listitem>
-   <para>
-   </para>
-   <para>
-   </para>
-  </listitem>
- </varlistentry>
--->
-</variablelist>
-
-</sect2>
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1 id="templates">
-<title>Privoxy's Template Files</title>
-<para>
- All <application>Privoxy</application> built-in pages, i.e. error pages such as the 
- <ulink url="http://show-the-404-error.page";><quote>404 - No Such Domain</quote>
- error page</ulink>, the <ulink
- url="http://ads.bannerserver.example.com/nasty-ads/sponsor.html";><quote>BLOCKED</quote>
- page</ulink>
- and all pages of its <ulink url="http://config.privoxy.org/";>web-based
- user interface</ulink>, are generated from <emphasis>templates</emphasis>. 
- (<application>Privoxy</application> must be running for the above links to work as
- intended.)
-</para>
-
-<para>
- These templates are stored in a subdirectory of the <link linkend="confdir">configuration
- directory</link> called <filename>templates</filename>. On Unixish platforms,
- this is typically
- <ulink url="file:///etc/privoxy/templates/"><filename>/etc/privoxy/templates/</filename></ulink>.
-</para>
-
-<para>
- The templates are basically normal HTML files, but with place-holders (called symbols
- or exports), which <application>Privoxy</application> fills at run time. It
- is possible to edit the templates with a normal text editor, should you want
- to customize them. (<emphasis>Not recommended for the casual
- user</emphasis>). Should you create your own custom templates, you should use 
- the <filename>config</filename> setting <link linkend="templdir">templdir</link>
- to specify an alternate location, so your templates do not get overwritten
- during upgrades. 
- </para>
- <para>
- Note that just like in configuration files, lines starting
- with <literal>#</literal> are ignored when the templates are filled in.
-</para>
-
-<para>
- The place-holders are of the form <literal>@name@</literal>, and you will
- find a list of available symbols, which vary from template to template,
- in the comments at the start of each file. Note that these comments are not
- always accurate, and that it's probably best to look at the existing HTML
- code to find out which symbols are supported and what they are filled in with.
-</para>
-
-<para>
- A special application of this substitution mechanism is to make whole
- blocks of HTML code disappear when a specific symbol is set. We use this
- for many purposes, one of them being to include the beta warning in all
- our user interface (CGI) pages when <application>Privoxy</application>
- is in an alpha or beta development stage:
-</para>
-
-<para>
- <screen>
-&lt;!-- @if-unstable-start --&gt;
-
-  ... beta warning HTML code goes here ...
-
-&lt;!-- if-unstable-end@ --&gt;</screen>
-</para>
-
-<para>
- If the "unstable" symbol is set, everything in between and including
- <literal>@if-unstable-start</literal> and <literal>if-unstable-end@</literal>
- will disappear, leaving nothing but an empty comment:
-</para>
-
-<para>
- <screen>&lt;!--  --&gt;</screen>
-</para>
-
-<para>
- There's also an if-then-else construct and an <literal>#include</literal>
- mechanism, but you'll sure find out if you are inclined to edit the
- templates ;-)
-</para>
-
-<para>
- All templates refer to a style located at
- <ulink url="http://config.privoxy.org/send-stylesheet";><literal>http://config.privoxy.org/send-stylesheet</literal></ulink>.
- This is, of course, locally served by <application>Privoxy</application>
- and the source for it can be found and edited in the
- <filename>cgi-style.css</filename> template.
-</para>
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect1 id="contact"><title>Contacting the Developers, Bug Reporting and Feature
-Requests</title>
-
-<!-- Include contacting.sgml boilerplate: -->
- &contacting;
-<!-- end boilerplate -->
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="copyright"><title>Privoxy Copyright, License and History</title>
-
-<!-- Include copyright.sgml: -->
- &copyright;
-<!-- end copyright -->
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2><title>License</title>
-<!-- Include copyright.sgml: -->
- &license;
-<!-- end copyright -->
-</sect2>
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-<sect2 id="history"><title>History</title>
-<!-- Include history.sgml: -->
- &history;
-<!-- end history -->
-</sect2>
-
-<sect2 id="authors"><title>Authors</title>
-<!-- Include p-authors.sgml: -->
- &p-authors;
-<!-- end authors -->
-</sect2>
-
-</sect1>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="seealso"><title>See Also</title>
-<!-- Include seealso.sgml: -->
- &seealso;
-<!-- end seealso -->
-</sect1>
-
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 id="appendix"><title>Appendix</title>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="regex">
-<title>Regular Expressions</title>
-<para>
- <application>Privoxy</application> uses Perl-style <quote>regular
- expressions</quote> in its <link linkend="actions-file">actions
- files</link> and <link linkend="filter-file">filter file</link>,
- through the <ulink url="http://www.pcre.org/";>PCRE</ulink> and
-<!-- 
- dead 08/27/06
- <ulink url="http://www.oesterhelt.org/pcrs/";>PCRS</ulink> libraries.
--->
- <application>PCRS</application> libraries.
-</para>
-
-<para>
- If you are reading this, you probably don't understand what <quote>regular
- expressions</quote> are, or what they can do. So this will be a very brief
- introduction only. A full explanation would require a <ulink
- url="http://www.oreilly.com/catalog/regex/";>book</ulink> ;-)
-</para>
-
-<para>
- Regular expressions provide a language to describe patterns that can be
- run against strings of characters (letter, numbers, etc), to see if they
- match the string or not. The  patterns are themselves (sometimes complex)
- strings of literal characters, combined with  wild-cards, and other special
- characters, called meta-characters. The <quote>meta-characters</quote> have
- special meanings and are used to build complex patterns to be matched against.
- Perl Compatible Regular Expressions are an especially convenient
- <quote>dialect</quote> of the regular expression language.
-</para>
-
-<para>
- To make a simple analogy, we do something similar when we use wild-card
- characters when listing files with the <command>dir</command> command in DOS. 
- <literal>*.*</literal> matches all filenames. The <quote>special</quote>
- character here is the asterisk which matches any and all characters. We can be
- more specific and use <literal>?</literal> to match just individual
- characters. So <quote>dir file?.text</quote> would match
- <quote>file1.txt</quote>, <quote>file2.txt</quote>, etc. We are pattern
- matching, using a similar technique to <quote>regular expressions</quote>!
-</para>
-
-<para>
- Regular expressions do essentially the same thing, but are much, much more
- powerful. There are many more <quote>special characters</quote> and ways of 
- building complex patterns however. Let's look at a few of the common ones,
- and then some examples:
-</para>
-
-<para><simplelist>
- <member>
-  <emphasis>.</emphasis> - Matches any single character, e.g. <quote>a</quote>,
-  <quote>A</quote>, <quote>4</quote>, <quote>:</quote>, or <quote>@</quote>.
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>?</emphasis> - The preceding character or expression is matched ZERO or ONE
-  times. Either/or.
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>+</emphasis> - The preceding character or expression is matched ONE or MORE
-  times.
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>*</emphasis> - The preceding character or expression is matched ZERO or MORE
-  times.
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>\</emphasis> - The <quote>escape</quote> character denotes that
-  the following character should be taken literally. This is used where one of the 
-  special characters (e.g. <quote>.</quote>) needs to be taken literally and
-  not as a special meta-character. Example: <quote>example\.com</quote>, makes 
-  sure the period is recognized only as a period (and not expanded to its 
-  meta-character meaning of any single character).
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>[ ]</emphasis> - Characters enclosed in brackets will be matched if
-  any of the enclosed characters are encountered. For instance, <quote>[0-9]</quote>
-  matches any numeric digit (zero through nine). As an example, we can combine 
-  this with <quote>+</quote> to match any digit one of more times: <quote>[0-9]+</quote>.
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>( )</emphasis> - parentheses are used to group a sub-expression,
-  or multiple sub-expressions.
- </member>
-</simplelist></para>
-
-<para><simplelist>
- <member>
-  <emphasis>|</emphasis> - The <quote>bar</quote> character works like an
-  <quote>or</quote> conditional statement. A match is successful if the
-  sub-expression on either side of <quote>|</quote> matches. As an example:
-  <quote>/(this|that) example/</quote> uses grouping and the bar character 
-  and would match either <quote>this example</quote> or <quote>that
-  example</quote>, and nothing else.
- </member>
-</simplelist></para>
-
-<para>
- These are just some of the ones you are likely to use when matching URLs with 
- <application>Privoxy</application>, and is a long way from a definitive
- list. This is enough to get us started with a few simple examples which may
- be more illuminating:
-</para>
-
-<para>
- <emphasis><literal>/.*/banners/.*</literal></emphasis> - A  simple example
- that uses the common combination of <quote>.</quote> and <quote>*</quote> to 
- denote any character, zero or more times. In other words, any string at all.
- So we start with a literal forward slash, then our regular expression pattern 
- (<quote>.*</quote>) another literal forward slash, the string
- <quote>banners</quote>, another forward slash, and lastly another
- <quote>.*</quote>. We are building 
- a directory path here. This will match any file with the path that has a
- directory named <quote>banners</quote> in it. The <quote>.*</quote> matches
- any characters, and this could conceivably be more forward slashes, so it
- might expand into a much longer looking path. For example, this could match:
- <quote>/eye/hate/spammers/banners/annoy_me_please.gif</quote>, or just
- <quote>/banners/annoying.html</quote>, or almost an infinite number of other
- possible combinations, just so it has <quote>banners</quote> in the path
- somewhere.
-</para>
-
-<para>
- And now something a little more complex:
-</para>
-
-<para>
- <emphasis><literal>/.*/adv((er)?ts?|ertis(ing|ements?))?/</literal></emphasis> - 
- We have several literal forward slashes again (<quote>/</quote>), so we are
- building another expression that is a file path statement. We have another 
- <quote>.*</quote>, so we are matching against any conceivable sub-path, just so
- it matches our expression. The only true literal that <emphasis>must
- match</emphasis> our pattern is <application>adv</application>, together with
- the forward slashes. What comes after the <quote>adv</quote> string is the
- interesting part. 
-</para>
-
-<para>
- Remember the <quote>?</quote> means the preceding expression (either a
- literal character or anything grouped with <quote>(...)</quote> in this case)
- can exist or not, since this means either zero or one match. So
- <quote>((er)?ts?|ertis(ing|ements?))</quote> is optional, as are the
- individual sub-expressions: <quote>(er)</quote>,
- <quote>(ing|ements?)</quote>, and the <quote>s</quote>. The <quote>|</quote>
- means <quote>or</quote>. We have two of those. For instance, 
- <quote>(ing|ements?)</quote>, can expand to match either <quote>ing</quote> 
- <emphasis>OR</emphasis> <quote>ements?</quote>. What is being done here, is an
- attempt at matching as many variations of <quote>advertisement</quote>, and 
- similar, as possible. So this would expand to match just <quote>adv</quote>,
- or <quote>advert</quote>, or <quote>adverts</quote>, or
- <quote>advertising</quote>, or <quote>advertisement</quote>, or
- <quote>advertisements</quote>. You get the idea. But it would not match 
- <quote>advertizements</quote> (with a <quote>z</quote>). We could fix that by
- changing our regular expression to: 
- <quote>/.*/adv((er)?ts?|erti(s|z)(ing|ements?))?/</quote>, which would then match
- either spelling.
-</para>
-
-<para>
- <emphasis><literal>/.*/advert[0-9]+\.(gif|jpe?g)</literal></emphasis> - Again 
- another path statement with forward slashes. Anything in the square brackets 
- <quote>[ ]</quote> can be matched. This is using <quote>0-9</quote> as a
- shorthand expression to mean any digit one through nine. It is the same as
- saying <quote>0123456789</quote>. So any digit matches. The <quote>+</quote>
- means one or more of the preceding expression must be included. The preceding 
- expression here is what is in the square brackets -- in this case, any digit 
- one through nine. Then, at the end, we have a grouping: <quote>(gif|jpe?g)</quote>. 
- This includes a <quote>|</quote>, so this needs to match the expression on
- either side of that bar character also. A simple <quote>gif</quote> on one side, and the other
- side will in turn match either <quote>jpeg</quote> or <quote>jpg</quote>,
- since the <quote>?</quote> means the letter <quote>e</quote> is optional and
- can be matched once or not at all. So we are building an expression here to
- match image GIF or JPEG type image file. It must include the literal
- string <quote>advert</quote>, then one or more digits, and a <quote>.</quote>
- (which is now a literal, and not a special character, since it is escaped
- with <quote>\</quote>), and lastly either <quote>gif</quote>, or
- <quote>jpeg</quote>, or <quote>jpg</quote>. Some possible matches would
- include: <quote>//advert1.jpg</quote>,
- <quote>/nasty/ads/advert1234.gif</quote>,
- <quote>/banners/from/hell/advert99.jpg</quote>. It would not match
- <quote>advert1.gif</quote> (no leading slash), or
- <quote>/adverts232.jpg</quote> (the expression does not include an
- <quote>s</quote>), or <quote>/advert1.jsp</quote> (<quote>jsp</quote> is not
- in the expression anywhere).
-</para>
-
-<para>
- We are barely scratching the surface of regular expressions here so that you
- can understand the default <application>Privoxy</application>
- configuration files, and maybe use this knowledge to customize your own
- installation. There is much, much more that can be done with regular
- expressions. Now that you know enough to get started, you can learn more on
- your own :/
-</para>
-
-<para>
- More reading on Perl Compatible Regular expressions: 
- <ulink url="http://perldoc.perl.org/perlre.html";>http://perldoc.perl.org/perlre.html</ulink>
-</para>
-
-<para>
- For information on regular expression based substitutions and their applications
- in filters, please see the <link linkend="filter-file">filter file tutorial</link>
- in this manual.
-</para>
-</sect2>
-
-<!--  ~  End section  ~  -->
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2>
-<title>Privoxy's Internal Pages</title>
-
-<para>
- Since <application>Privoxy</application> proxies each requested 
- web page, it is easy for <application>Privoxy</application> to 
- trap certain special URLs. In this way, we can talk directly to
- <application>Privoxy</application>, and see how it is 
- configured, see how our rules are being applied, change these 
- rules and other configuration options, and even turn
- <application>Privoxy's</application> filtering off, all with 
- a web browser.
-
-</para>
-
-<para>
- The URLs listed below are the special ones that allow direct access 
- to <application>Privoxy</application>. Of course,
- <application>Privoxy</application> must be running to access these. If 
- not, you will get a friendly error message. Internet access is not 
- necessary either.
-</para>
-
-<para>
- <itemizedlist>
-
- <listitem>
-  <para>  
-   Privoxy main page: 
-  </para>
-  <blockquote>
-   <para> 
-     <ulink url="http://config.privoxy.org/";>http://config.privoxy.org/</ulink>
-   </para>
-  </blockquote>
-  <para>
-   There is a shortcut: <ulink url="http://p.p/";>http://p.p/</ulink> (But it
-   doesn't provide a fall-back to a real page, in case the request is not
-   sent through <application>Privoxy</application>)
-  </para>
- </listitem>
-
- <listitem>
-  <para>  
-    Show information about the current configuration, including viewing and 
-    editing of actions files:
-  </para>
-   <blockquote>
-   <para> 
-    <ulink url="http://config.privoxy.org/show-status";>http://config.privoxy.org/show-status</ulink>
-   </para>
-  </blockquote>
- </listitem>
- 
- <listitem>
-  <para>  
-    Show the source code version numbers:
-  </para>
-  <blockquote>
-   <para> 
-    <ulink url="http://config.privoxy.org/show-version";>http://config.privoxy.org/show-version</ulink>
-   </para>
-  </blockquote>
- </listitem>
- 
- <listitem>
-  <para>  
-   Show the browser's request headers:
-  </para>
-  <blockquote>
-   <para> 
-    <ulink url="http://config.privoxy.org/show-request";>http://config.privoxy.org/show-request</ulink>
-   </para>
-  </blockquote>
- </listitem>
- 
- <listitem>
-  <para>  
-   Show which actions apply to a URL and why:
-  </para>
-   <blockquote>
-   <para> 
-    <ulink url="http://config.privoxy.org/show-url-info";>http://config.privoxy.org/show-url-info</ulink>
-   </para>
-  </blockquote>
- </listitem>
- 
- <listitem>
-  <para>  
-   Toggle Privoxy on or off. This feature can be turned off/on in the main 
-   <filename>config</filename> file. When toggled <quote>off</quote>, <quote>Privoxy</quote>
-   continues to run, but only as a pass-through proxy, with no actions taking
-   place:
-  </para>
-   <blockquote>
-   <para> 
-    <ulink url="http://config.privoxy.org/toggle";>http://config.privoxy.org/toggle</ulink>
-   </para>
-  </blockquote>
-  <para>
-   Short cuts. Turn off, then on: 
-  </para>
-   <blockquote>
-   <para> 
-     <ulink url="http://config.privoxy.org/toggle?set=disable";>http://config.privoxy.org/toggle?set=disable</ulink>
-   </para>
-  </blockquote>
-   <blockquote>
-   <para> 
-     <ulink url="http://config.privoxy.org/toggle?set=enable";>http://config.privoxy.org/toggle?set=enable</ulink>
-   </para>
-  </blockquote>
- </listitem>
- 
- </itemizedlist>
-</para>
-
-<para>
- These may be bookmarked for quick reference. See next.
-
-</para>
-
-<sect3 id="bookmarklets">
-<title>Bookmarklets</title>
-<para>
- Below are some <quote>bookmarklets</quote> to allow you to easily access a
- <quote>mini</quote> version of some of <application>Privoxy's</application>
- special pages. They are designed for MS Internet Explorer, but should work
- equally well in Netscape, Mozilla, and other browsers which support
- JavaScript. They are designed to run directly from your bookmarks - not by
- clicking the links below (although that should work for testing).
-</para>
-<para>
- To save them, right-click the link and choose <quote>Add to Favorites</quote>
- (IE) or <quote>Add Bookmark</quote> (Netscape). You will get a warning that
- the bookmark <quote>may not be safe</quote> - just click OK. Then you can run the
- Bookmarklet directly from your favorites/bookmarks. For even faster access,
- you can put them on the <quote>Links</quote> bar (IE) or the <quote>Personal
- Toolbar</quote> (Netscape), and run them with a single click. 
-</para>
-
-<para>
- <itemizedlist>
-
-  <listitem>
-   <para>
-    <ulink
-    url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&#38;set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Enable</ulink>
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    <ulink
-    url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&#38;set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Disable</ulink>
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    <ulink
-    url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&#38;set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Toggle Privoxy</ulink> (Toggles between enabled and disabled)
-   </para>
-  </listitem> 
-
-  <listitem>
-   <para>
-    <ulink
-    url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y','ijbstatus','width=250,height=2,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy- View Status</ulink>
-   </para>
-  </listitem> 
-<!--
-  <listitem>
-   <para>
-    <ulink url="javascript:w=Math.floor(screen.width/2);h=Math.floor(screen.height*0.9);void(window.open('http://www.privoxy.org/actions/index.php?url='+escape(location.href),'Feedback','screenx='+w+',width='+w+',height='+h+',scrollbars=yes,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Submit Actions File Feedback</ulink>
-   </para>
-  </listitem> 
- --> 
-  <listitem>
-   <para>
-    <ulink url="javascript:void(window.open('http://config.privoxy.org/show-url-info?url='+escape(location.href),'Why').focus());">Privoxy - Why?</ulink>
-   </para>
-  </listitem> 
- </itemizedlist>
-</para>
-
-<para>
- Credit: The site which gave us the general idea for these bookmarklets is
- <ulink url="http://www.bookmarklets.com/";>www.bookmarklets.com</ulink>. They
- have more information about bookmarklets. 
-</para>
-
-
-</sect3>
-
-</sect2>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="chain">
-<title>Chain of Events</title>
-<para>
- Let's take a quick look at how some of <application>Privoxy's</application> 
- core features are triggered, and the ensuing sequence of events when a web
- page is requested by your browser:
-</para>
-
-<para>
- <itemizedlist>
- <listitem>
-  <para>
-   First, your web browser requests a web page. The browser knows to send 
-   the request to <application>Privoxy</application>, which will in turn, 
-   relay the request to the remote web server after passing the following 
-   tests: 
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   <application>Privoxy</application> traps any request for its own internal CGI 
-   pages (e.g <ulink url="http://p.p/";>http://p.p/</ulink>) and sends the CGI page back to the browser.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   Next, <application>Privoxy</application> checks to see if the URL 
-   matches any <link
-   linkend="BLOCK"><quote>+block</quote></link> patterns. If
-   so, the URL is then blocked, and the remote web server will not be contacted.
-   <link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link> 
-   and 
-   <link linkend="HANDLE-AS-EMPTY-DOCUMENT"><quote>+handle-as-empty-document</quote></link>
-   are then checked, and if there is no match, an 
-   HTML <quote>BLOCKED</quote> page is sent back to the browser. Otherwise, if
-   it does match, an image is returned for the former, and an empty text
-   document for the latter. The type of image would depend on the setting of
-   <link linkend="SET-IMAGE-BLOCKER"><quote>+set-image-blocker</quote></link>
-   (blank, checkerboard pattern, or an HTTP redirect to an image elsewhere).
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   Untrusted URLs are blocked. If URLs are being added to the
-   <filename>trust</filename> file, then that is done.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   If the URL pattern matches the <link
-   linkend="FAST-REDIRECTS"><quote>+fast-redirects</quote></link> action,
-   it is then processed. Unwanted parts of the requested URL are stripped.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   Now the rest of the client browser's request headers are processed. If any
-   of these match any of the relevant actions (e.g. <link
-   linkend="HIDE-USER-AGENT"><quote>+hide-user-agent</quote></link>,
-   etc.), headers are suppressed or forged as determined by these actions and
-   their parameters.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   Now the web server starts sending its response back (i.e. typically a web
-   page).
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   First, the server headers are read and processed to determine, among other
-   things, the MIME type (document type) and encoding. The headers are then
-   filtered as determined by the 
-   <link linkend="CRUNCH-INCOMING-COOKIES"><quote>+crunch-incoming-cookies</quote></link>,
-   <link linkend="SESSION-COOKIES-ONLY"><quote>+session-cookies-only</quote></link>,
-   and <link linkend="DOWNGRADE-HTTP-VERSION"><quote>+downgrade-http-version</quote></link>
-   actions.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   If any <link linkend="FILTER"><quote>+filter</quote></link> action
-   or <link
-   linkend="DEANIMATE-GIFS"><quote>+deanimate-gifs</quote></link>
-   action applies (and the document type fits the action), the rest of the page is
-   read into memory (up to a configurable limit). Then the filter rules (from
-   <filename>default.filter</filename> and any other filter files) are
-   processed against the buffered content. Filters are applied in the order
-   they are specified in one of the filter files. Animated GIFs, if present,
-   are reduced to either the first or last frame, depending on the action
-   setting.The entire page, which is now filtered, is then sent by
-   <application>Privoxy</application> back to your browser. 
-  </para>
-  <para>
-   If neither a <link linkend="FILTER"><quote>+filter</quote></link> action
-   or <link
-   linkend="DEANIMATE-GIFS"><quote>+deanimate-gifs</quote></link>
-   matches, then <application>Privoxy</application> passes the raw data through 
-   to the client browser as it becomes available.
-  </para>
- </listitem> 
- <listitem>
-  <para>
-   As the browser receives the now (possibly filtered) page content, it 
-   reads and then requests any URLs that may be embedded within the page
-   source, e.g. ad images, stylesheets, JavaScript, other HTML documents (e.g.
-   frames), sounds, etc. For each of these objects, the browser issues a
-   separate request (this is easily viewable in <application>Privoxy's</application>
-   logs). And each such request is in turn processed just as above. Note that a
-   complex web page will have many, many such embedded URLs. If these 
-   secondary requests are to a different server, then quite possibly a very 
-   differing set of actions is triggered.
-  </para>
- </listitem> 
- 
- </itemizedlist>
-</para>
-<para>
- NOTE: This is somewhat of a simplistic overview of what happens with each URL
- request. For the sake of brevity and simplicity, we have focused on 
- <application>Privoxy's</application> core features only.
-</para>
-
-</sect2>
-
-
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect2 id="actionsanat">
-<title>Troubleshooting: Anatomy of an Action</title>
-
-<para>
- The way <application>Privoxy</application> applies 
- <link linkend="ACTIONS">actions</link> and <link linkend="FILTER">filters</link>
- to any given URL can be complex, and not always so
- easy to understand what is happening. And sometimes we need to be able to
- <emphasis>see</emphasis> just what <application>Privoxy</application> is
- doing. Especially, if something <application>Privoxy</application> is doing
- is causing us a problem inadvertently. It can be a little daunting to look at
- the actions and filters files themselves, since they tend to be filled with
- <link linkend="regex">regular expressions</link> whose consequences are not
- always so obvious. 
-</para>
-
-<para>
- One quick test to see if <application>Privoxy</application> is causing a problem 
- or not, is to disable it temporarily. This should be the first troubleshooting 
- step. See <link linkend="bookmarklets">the Bookmarklets</link> section on a quick 
- and easy way to do this (be sure to flush caches afterward!). Looking at the 
- logs is a good idea too. (Note that both the toggle feature and logging are 
- enabled via <filename>config</filename> file settings, and may need to be 
- turned <quote>on</quote>.)
-</para>
-<para>
- Another easy troubleshooting step to try is if you have done any
- customization of your installation, revert back to the installed
- defaults and see if that helps. There are times the developers get complaints
- about one thing or another, and the problem is more related to a customized
- configuration issue.
-</para>
-
-<para>
- <application>Privoxy</application> also provides the 
- <ulink url="http://config.privoxy.org/show-url-info";>http://config.privoxy.org/show-url-info</ulink>
- page that can show us very specifically how <application>actions</application>
- are being applied to any given URL. This is a big help for troubleshooting.
-</para>
-
-<para>
- First, enter one URL (or partial URL) at the prompt, and then
- <application>Privoxy</application> will tell us 
- how the current configuration will handle it. This will not
- help with filtering effects (i.e. the <link
- linkend="FILTER"><quote>+filter</quote></link> action) from
- one of the filter files since this is handled very
- differently and not so easy to trap! It also will not tell you about any other
- URLs that may be embedded within the URL you are testing. For instance, images
- such as ads are expressed as URLs within the raw page source of HTML pages. So
- you will only get info for the actual URL that is pasted into the prompt area
- -- not any sub-URLs. If you want to know about embedded URLs like ads, you
- will have to dig those out of the HTML source. Use your browser's <quote>View
- Page Source</quote> option for this. Or right click on the ad, and grab the
- URL.
-</para>
-
-<para>
- Let's try an example, <ulink url="http://google.com";>google.com</ulink>, 
- and look at it one section at a time in a sample configuration (your real 
- configuration may vary):
-</para>
-
-<para>
- <screen>
- Matches for http://www.google.com:
-
- In file: default.action <guibutton>[ View ]</guibutton> <guibutton>[ Edit ]</guibutton>
-
- {+change-x-forwarded-for{block}
- +deanimate-gifs {last}
- +fast-redirects {check-decoded-url}
- +filter {refresh-tags}
- +filter {img-reorder}
- +filter {banners-by-size}
- +filter {webbugs}
- +filter {jumping-windows}
- +filter {ie-exploits}
- +hide-from-header {block}
- +hide-referrer {forge}
- +session-cookies-only
- +set-image-blocker {pattern}
-/
- 
- { -session-cookies-only }
- .google.com
-
- { -fast-redirects }
- .google.com
-
-In file: user.action <guibutton>[ View ]</guibutton> <guibutton>[ Edit ]</guibutton>
-(no matches in this file)  
-</screen>
-</para>
-
-<para>
- This is telling us how we have defined our 
- <link linkend="ACTIONS"><quote>actions</quote></link>, and
- which ones match for our test case, <quote>google.com</quote>. 
- Displayed is all the actions that are available to us. Remember,
- the <literal>+</literal> sign denotes <quote>on</quote>. <literal>-</literal>
- denotes <quote>off</quote>. So some are <quote>on</quote> here, but many 
- are <quote>off</quote>. Each example we try may provide a slightly different
- end result, depending on our configuration directives.
-</para>
-<para>
- The first listing
-  is for our <filename>default.action</filename> file. The large, multi-line
-  listing, is how the actions are set to match for all URLs, i.e. our default
-  settings. If you look at your <quote>actions</quote> file, this would be the
-  section just below the <quote>aliases</quote> section near the top. This
-  will apply to all URLs as signified by the single forward slash at the end
-  of the listing -- <quote> / </quote>.
-</para>
-
-<para>
- But we have defined additional actions that would be exceptions to these general
- rules, and then we list specific URLs (or patterns) that these exceptions
- would apply to. Last match wins. Just below this then are two explicit
- matches for <quote>.google.com</quote>. The first is negating our previous
- cookie setting, which was for <link
- linkend="SESSION-COOKIES-ONLY"><quote>+session-cookies-only</quote></link>
- (i.e. not persistent). So we will allow persistent cookies for google, at
- least that is how it is in this example. The second turns
- <emphasis>off</emphasis> any <link
- linkend="FAST-REDIRECTS"><quote>+fast-redirects</quote></link>
- action, allowing this to take place unmolested. Note that there is a leading
- dot here -- <quote>.google.com</quote>. This will match any hosts and
- sub-domains, in the google.com domain also, such as
- <quote>www.google.com</quote> or <quote>mail.google.com</quote>. But it would not 
- match <quote>www.google.de</quote>! So, apparently, we have these two actions
- defined as exceptions to the general rules at the top somewhere in the lower
- part of our <filename>default.action</filename> file, and
- <quote>google.com</quote> is referenced somewhere in these latter sections.
-</para>
-
-<para>
- Then, for our <filename>user.action</filename> file, we again have no hits.
- So there is nothing google-specific that we might have added to our own, local
- configuration. If there was, those actions would over-rule any actions from 
- previously processed files, such as <filename>default.action</filename>.
- <filename>user.action</filename> typically has the last word. This is the
- best place to put hard and fast exceptions,
-</para>
-
-<para>
- And finally we pull it all together in the bottom section and summarize how
- <application>Privoxy</application> is applying all its <quote>actions</quote> 
- to <quote>google.com</quote>:
-
-</para>
-
-<para>
- <screen>
-
- Final results:
- 
- -add-header
- -block
- +change-x-forwarded-for{block} 
- -client-header-filter{hide-tor-exit-notation}
- -content-type-overwrite
- -crunch-client-header
- -crunch-if-none-match
- -crunch-incoming-cookies
- -crunch-outgoing-cookies
- -crunch-server-header
- +deanimate-gifs {last}
- -downgrade-http-version
- -fast-redirects
- -filter {js-events}
- -filter {content-cookies}
- -filter {all-popups}
- -filter {banners-by-link}
- -filter {tiny-textforms}
- -filter {frameset-borders}
- -filter {demoronizer}
- -filter {shockwave-flash}
- -filter {quicktime-kioskmode}
- -filter {fun}
- -filter {crude-parental}
- -filter {site-specifics}
- -filter {js-annoyances}
- -filter {html-annoyances}
- +filter {refresh-tags}
- -filter {unsolicited-popups}
- +filter {img-reorder}
- +filter {banners-by-size}
- +filter {webbugs}
- +filter {jumping-windows}
- +filter {ie-exploits}
- -filter {google}
- -filter {yahoo}
- -filter {msn}
- -filter {blogspot}
- -filter {no-ping}
- -force-text-mode
- -handle-as-empty-document
- -handle-as-image
- -hide-accept-language
- -hide-content-disposition
- +hide-from-header {block}
- -hide-if-modified-since
- +hide-referrer {forge}
- -hide-user-agent
- -limit-connect
- -overwrite-last-modified
- -prevent-compression
- -redirect
- -server-header-filter{xml-to-html}
- -server-header-filter{html-to-xml} 
- -session-cookies-only
- +set-image-blocker {pattern} </screen>
-</para>
-
-<para>
- Notice the only difference here to the previous listing, is to 
- <quote>fast-redirects</quote> and <quote>session-cookies-only</quote>,
- which are activated specifically for this site in our configuration, 
- and thus show in the <quote>Final Results</quote>.
-</para>
-
-<para>
- Now another example, <quote>ad.doubleclick.net</quote>:
-</para>
-
-<para>
- <screen>
-
- { +block{Domains starts with "ad"} }
-  ad*.
-
- { +block{Domain contains "ad"} }
-  .ad.
-
- { +block{Doubleclick banner server} +handle-as-image }
-  .[a-vx-z]*.doubleclick.net
-</screen>
-</para>
-
-<para>
- We'll just show the interesting part here - the explicit matches. It is 
- matched three different times. Two <quote>+block{}</quote> sections, 
- and a <quote>+block{} +handle-as-image</quote>,
- which is the expanded form of one of our aliases that had been defined as: 
- <quote>+block-as-image</quote>. (<link
- linkend="ALIASES"><quote>Aliases</quote></link> are defined in
- the first section of the actions file and typically used to combine more 
- than one action.)
-</para>
-
-<para>
- Any one of these would have done the trick and blocked this as an unwanted 
- image. This is unnecessarily redundant since the last case effectively 
- would also cover the first. No point in taking chances with these guys 
- though ;-) Note that if you want an ad or obnoxious 
- URL to be invisible, it should be defined as <quote>ad.doubleclick.net</quote>
- is done here -- as both a <link
- linkend="BLOCK"><quote>+block{}</quote></link>
- <emphasis>and</emphasis> an 
- <link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link>.
- The custom alias <quote><literal>+block-as-image</literal></quote> just
- simplifies the process and make it more readable.
-</para>
-
-<para>
- One last example. Let's try <quote>http://www.example.net/adsl/HOWTO/</quote>.
- This one is giving us problems. We are getting a blank page. Hmmm ...
-</para>
-
-<para>
- <screen>
-
- Matches for http://www.example.net/adsl/HOWTO/:
-
- In file: default.action <guibutton>[ View ]</guibutton> <guibutton>[ Edit ]</guibutton>
-
- {-add-header 
-  -block
-  +change-x-forwarded-for{block} 
-  -client-header-filter{hide-tor-exit-notation}
-  -content-type-overwrite
-  -crunch-client-header
-  -crunch-if-none-match
-  -crunch-incoming-cookies
-  -crunch-outgoing-cookies
-  -crunch-server-header
-  +deanimate-gifs 
-  -downgrade-http-version 
-  +fast-redirects {check-decoded-url}
-  -filter {js-events}
-  -filter {content-cookies}
-  -filter {all-popups}
-  -filter {banners-by-link}
-  -filter {tiny-textforms}
-  -filter {frameset-borders}
-  -filter {demoronizer}
-  -filter {shockwave-flash}
-  -filter {quicktime-kioskmode}
-  -filter {fun}
-  -filter {crude-parental}
-  -filter {site-specifics}
-  -filter {js-annoyances}
-  -filter {html-annoyances}
-  +filter {refresh-tags}
-  -filter {unsolicited-popups}
-  +filter {img-reorder}
-  +filter {banners-by-size}
-  +filter {webbugs}
-  +filter {jumping-windows}
-  +filter {ie-exploits}
-  -filter {google}
-  -filter {yahoo}
-  -filter {msn}
-  -filter {blogspot}
-  -filter {no-ping}
-  -force-text-mode
-  -handle-as-empty-document
-  -handle-as-image 
-  -hide-accept-language
-  -hide-content-disposition  
-  +hide-from-header{block} 
-  +hide-referer{forge} 
-  -hide-user-agent 
-  -overwrite-last-modified
-  +prevent-compression 
-  -redirect
-  -server-header-filter{xml-to-html}
-  -server-header-filter{html-to-xml} 
-  +session-cookies-only 
-  +set-image-blocker{blank} }
-   /
-
- { +block{Path contains "ads".} +handle-as-image }
-  /ads
-</screen>
-</para>
-
-<para>
- Ooops, the <quote>/adsl/</quote> is matching <quote>/ads</quote> in our 
- configuration! But we did not want this at all! Now we see why we get the
- blank page. It is actually triggering two different actions here, and 
- the effects are aggregated so that the URL is blocked, and &my-app; is told 
- to treat the block as if it were an image. But this is, of course, all wrong.
-  We could now add a new action below this (or better in our own
-  <filename>user.action</filename> file) that explicitly
-  <emphasis>un</emphasis> blocks (
-  <link linkend="BLOCK"><quote>{-block}</quote></link>) paths with
-  <quote>adsl</quote> in them (remember, last match in the configuration
-  wins). There are various ways to handle such exceptions. Example:
-</para>
-
-<para>
- <screen>
-
- { -block }
-  /adsl
-</screen>
-</para>
-
-<para>
- Now the page displays ;-) 
- Remember to flush your browser's caches when making these kinds of changes to
- your configuration to insure that you get a freshly delivered page! Or, try
- using <literal>Shift+Reload</literal>.
-</para>
-
-<para>
- But now what about a situation where we get no explicit matches like 
- we did with:
-</para>
-
-<para>
- <screen>
-
- { +block{Path starts with "ads".} +handle-as-image }
- /ads
-</screen>
-</para>
-
-<para>
- That actually was very helpful and pointed us quickly to where the problem
- was. If you don't get this kind of match, then it means one of the default 
- rules in the first section of <filename>default.action</filename> is causing
- the problem. This would require some guesswork, and maybe a little trial and
- error to isolate the offending rule. One likely cause would be one of the
- <link linkend="FILTER"><quote>+filter</quote></link> actions.
- These tend to be harder to troubleshoot.
- Try adding the URL for the site to one of aliases that turn off
- <link linkend="FILTER"><quote>+filter</quote></link>:
-</para>
-
-<para>
- <screen>
-
- { shop }
- .quietpc.com
- .worldpay.com   # for quietpc.com
- .jungle.com
- .scan.co.uk
- .forbes.com
-</screen>
-</para>
-
-<para>
- <quote><literal>{ shop }</literal></quote> is an <quote>alias</quote> that expands to 
- <quote><literal>{ -filter -session-cookies-only }</literal></quote>.
- Or you could do your own exception to negate filtering:
-
-</para>
-
-<para>
- <screen>
-
- { -filter }
- # Disable ALL filter actions for sites in this section
- .forbes.com
- developer.ibm.com
- localhost
-</screen>
-</para>
-
-<para>
- This would turn off all filtering for these sites. This is best
- put in <filename>user.action</filename>, for local site
- exceptions. Note that when a simple domain pattern is used by itself (without
- the subsequent path portion), all sub-pages within that domain are included 
- automatically in the scope of the action.
-</para>
-
-<para>
- Images that are inexplicably being blocked, may well be hitting the 
-<link linkend="FILTER-BANNERS-BY-SIZE"><quote>+filter{banners-by-size}</quote></link>
- rule, which assumes 
- that images of certain sizes are ad banners (works well 
- <emphasis>most of the time</emphasis>  since these tend to be standardized).
-</para>
-
-<para>
- <quote><literal>{ fragile }</literal></quote> is an alias that disables most
- actions that are the most likely to cause trouble. This can be used as a
- last resort for problem sites. 
-</para> 
-<para>
- <screen>
-
- { fragile }
- # Handle with care: easy to break
- mail.google.
- mybank.example.com</screen>
-</para>
- 
-
-<para>
- <emphasis>Remember to flush caches!</emphasis> Note that the 
- <literal>mail.google</literal> reference lacks the TLD portion (e.g. 
- <quote>.com</quote>). This will effectively match any TLD with 
- <literal>google</literal> in it, such as <literal>mail.google.de.</literal>, 
- just as an example.
-</para>
-<para> 
- If this still does not work, you will have to go through the remaining
- actions one by one to find which one(s) is causing the problem.
-</para>
-
-</sect2>
-
-</sect1>
-
- <!--
-
- This program is free software; you can redistribute it 
- and/or modify it under the terms of the GNU General
- Public License as published by the Free Software
- Foundation; either version 2 of the License, or (at
- your option) any later version.
-
- This program is distributed in the hope that it will
- be useful, but WITHOUT ANY WARRANTY; without even the
- implied warranty of MERCHANTABILITY or FITNESS FOR A
- PARTICULAR PURPOSE.  See the GNU General Public
- License for more details.
-
- The GNU General Public License should be included with
- this file.  If not, you can view it at
- http://www.gnu.org/copyleft/gpl.html
- or write to the Free Software Foundation, Inc., 
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 
- USA
-
- $Log: user-manual.sgml,v $
- Revision 2.103  2009/03/21 10:49:05  fabiankeil
- Merge updated ChangeLog.
-
- Revision 2.102  2009/03/15 19:31:36  fabiankeil
- Update "What's New in this Release" section.
-
- Revision 2.101  2009/02/25 19:01:56  fabiankeil
- Fix typo.
-
- Revision 2.100  2009/02/19 17:14:11  fabiankeil
- - Copy the release cycle description from announce.txt into
-   the "What's New" section.
- - Stop referring to the ChangeLog for a "complete list of changes".
-   The "What's New" section already contains the complete list.
-
- Revision 2.99  2009/02/19 02:20:22  hal9
- Make some links in seealso conditional. Man page is now privoxy only links.
-
- Revision 2.98  2009/02/16 17:10:33  fabiankeil
- Fix entry about shortened log messages. Noticed by Lee.
-
- Revision 2.97  2009/02/14 18:01:00  fabiankeil
- Import ChangeLog.
-
- Revision 2.96  2009/02/14 13:14:03  fabiankeil
- Unbreak syntax.
-
- Revision 2.95  2009/02/14 12:51:26  fabiankeil
- Mention match-all.action in the "Actions Files Tutorial" section.
-
- Revision 2.94  2009/02/14 11:50:31  fabiankeil
- Some indentation fixes.
-
- Revision 2.93  2009/02/14 10:14:42  fabiankeil
- Mention match-all.action in the action file descriptions.
-
- Revision 2.92  2009/02/12 16:08:26  fabiankeil
- Declare the code stable.
-
- Revision 2.91  2009/01/13 16:50:35  fabiankeil
- The standard.action file is gone.
-
- Revision 2.90  2008/09/26 16:53:09  fabiankeil
- Update "What's new" section.
-
- Revision 2.89  2008/09/21 15:38:56  fabiankeil
- Fix Portage tree sync instructions in Gentoo section.
- Anonymously reported at ijbswa-developers@.
-
- Revision 2.88  2008/09/21 14:42:52  fabiankeil
- Add documentation for change-x-forwarded-for{},
- remove documentation for hide-forwarded-for-headers.
-
- Revision 2.87  2008/08/30 15:37:35  fabiankeil
- Update entities.
-
- Revision 2.86  2008/08/16 10:12:23  fabiankeil
- Merge two sentences and move the URL to the end of the item.
-
- Revision 2.85  2008/08/16 10:04:59  fabiankeil
- Some more syntax fixes. This version actually builds.
-
- Revision 2.84  2008/08/16 09:42:45  fabiankeil
- Turns out building docs works better if the syntax is valid.
-
- Revision 2.83  2008/08/16 09:32:02  fabiankeil
- Mention changes since 3.0.9 beta.
-
- Revision 2.82  2008/08/16 09:00:52  fabiankeil
- Fix example URL pattern (once more with feeling).
-
- Revision 2.81  2008/08/16 08:51:28  fabiankeil
- Update version-related entities.
-
- Revision 2.80  2008/07/18 16:54:30  fabiankeil
- Remove erroneous whitespace in documentation link.
- Reported by John Chronister in #2021611.
-
- Revision 2.79  2008/06/27 18:00:53  markm68k
- remove outdated startup information for mac os x
-
- Revision 2.78  2008/06/21 17:03:03  fabiankeil
- Fix typo.
-
- Revision 2.77  2008/06/14 13:45:22  fabiankeil
- Re-add a colon I unintentionally removed a few revisions ago.
-
- Revision 2.76  2008/06/14 13:21:28  fabiankeil
- Prepare for the upcoming 3.0.9 beta release.
-
- Revision 2.75  2008/06/13 16:06:48  fabiankeil
- Update the "What's New in this Release" section with
- the ChangeLog entries changelog2doc.pl could handle.
-
- Revision 2.74  2008/05/26 15:55:46  fabiankeil
- - Update "default profiles" table.
- - Add some more pcrs redirect examples and note that
-   enabling debug 128 helps to get redirects working.
-
- Revision 2.73  2008/05/23 14:43:18  fabiankeil
- Remove previously out-commented block that caused syntax problems.
-
- Revision 2.72  2008/05/12 10:26:14  fabiankeil
- Synchronize content filter descriptions with the ones in default.filter.
-
- Revision 2.71  2008/04/10 17:37:16  fabiankeil
- Actually we use "modern" POSIX 1003.2 regular
- expressions in path patterns, not PCRE.
-
- Revision 2.70  2008/04/10 15:59:12  fabiankeil
- Add another section to the client-header-tagger example that shows
- how to actually change the action settings once the tag is created.
-
- Revision 2.69  2008/03/29 12:14:25  fabiankeil
- Remove send-wafer and send-vanilla-wafer actions.
-
- Revision 2.68  2008/03/28 15:13:43  fabiankeil
- Remove inspect-jpegs action.
-
- Revision 2.67  2008/03/27 18:31:21  fabiankeil
- Remove kill-popups action.
-
- Revision 2.66  2008/03/06 16:33:47  fabiankeil
- If limit-connect isn't used, don't limit CONNECT requests to port 443.
-
- Revision 2.65  2008/03/04 18:30:40  fabiankeil
- Remove the treat-forbidden-connects-like-blocks action. We now
- use the "blocked" page for forbidden CONNECT requests by default.
-
- Revision 2.64  2008/03/01 14:10:28  fabiankeil
- Use new block syntax. Still needs some polishing.
-
- Revision 2.63  2008/02/22 05:50:37  markm68k
- fix merge problem
-
- Revision 2.62  2008/02/11 11:52:23  hal9
- Fix entity ... s/&/&amp;
-
- Revision 2.61  2008/02/11 03:41:47  markm68k
- more updates for mac os x
-
- Revision 2.60  2008/02/11 03:40:25  markm68k
- more updates for mac os x
-
- Revision 2.59  2008/02/11 00:52:34  markm68k
- reflect new changes for mac os x
-
- Revision 2.58  2008/02/03 21:37:40  hal9
- Apply patch from Mark: s/OSX/OS X/
-
- Revision 2.57  2008/02/03 19:10:14  fabiankeil
- Mention forward-socks5.
-
- Revision 2.56  2008/01/31 19:11:35  fabiankeil
- Let the +client-header-filter{hide-tor-exit-notation} example apply
- to all requests as "tainted" Referers aren't limited to exit TLDs.
-
- Revision 2.55  2008/01/19 21:26:37  hal9
- Add IE7 to configuration section per Gerry.
-
- Revision 2.54  2008/01/19 17:52:39  hal9
- Re-commit to fix various minor issues for new release.
-
- Revision 2.53  2008/01/19 15:03:05  hal9
- Doc sources tagged for 3.0.8 release.
-
- Revision 2.52  2008/01/17 01:49:51  hal9
- Change copyright notice for docs s/2007/2008/. All these will be rebuilt soon
- enough.
-
- Revision 2.51  2007/12/23 16:48:24  fabiankeil
- Use more precise example descriptions for the mysterious domain patterns.
-
- Revision 2.50  2007/12/08 12:44:36  fabiankeil
- - Remove already commented out pre-3.0.7 changes.
- - Update the "new log defaults" paragraph.
-
- Revision 2.49  2007/12/06 18:21:55  fabiankeil
- Update hide-forwarded-for-headers description.
-
- Revision 2.48  2007/11/24 19:07:17  fabiankeil
- - Mention request rewriting.
- - Enable the conditional-forge paragraph.
- - Minor rewordings.
-
- Revision 2.47  2007/11/18 14:59:47  fabiankeil
- A few "Note to Upgraders" updates.
-
- Revision 2.46  2007/11/17 17:24:44  fabiankeil
- - Use new action defaults.
- - Minor fixes and rewordings.
-
- Revision 2.45  2007/11/16 11:48:46  hal9
- Fix one typo, and add a couple of small refinements.
-
- Revision 2.44  2007/11/15 03:30:20  hal9
- Results of spell check.
-
- Revision 2.43  2007/11/14 18:45:39  fabiankeil
- - Mention some more contributors in the "New in this Release" list.
- - Minor rewordings.
-
- Revision 2.42  2007/11/12 03:32:40  hal9
- Updates for "What's New" and "Notes to Upgraders". Various other changes in
- preparation for new release. User Manual is almost ready.
-
- Revision 2.41  2007/11/11 16:32:11  hal9
- This is primarily syncing What's New and Note to Upgraders sections with the many
- new features and changes (gleaned from memory but mostly from ChangeLog).
-
- Revision 2.40  2007/11/10 17:10:59  fabiankeil
- In the first third of the file, mention several times that
- the action editor is disabled by default in 3.0.7 beta and later.
-
- Revision 2.39  2007/11/05 02:34:49  hal9
- Various changes in preparation for the upcoming release. Much yet to be done.
-
- Revision 2.38  2007/09/22 16:01:42  fabiankeil
- Update embedded show-url-info output.
-
- Revision 2.37  2007/08/27 16:09:55  fabiankeil
- Fix pre-chroot-nslookup description which I failed to
- copy and paste properly. Reported by Stephen Gildea.
-
- Revision 2.36  2007/08/26 16:47:14  fabiankeil
- Add Stephen Gildea's pre-chroot-nslookup patch [#1276666],
- extensive comments moved to user manual.
-
- Revision 2.35  2007/08/26 14:59:49  fabiankeil
- Minor rewordings and fixes.
-
- Revision 2.34  2007/08/05 15:19:50  fabiankeil
- - Don't claim HTTP/1.1 compliance.
- - Use $ in some of the path pattern examples.
- - Use a hide-user-agent example argument without
-   leading and trailing space.
- - Make it clear that the cookie actions work with
-   HTTP cookies only.
- - Rephrase the inspect-jpegs text to underline
-   that it's only meant to protect against a single
-   exploit.
-
- Revision 2.33  2007/07/27 10:57:35  hal9
- Add references for user-agent strings for hide-user-agenet
-
- Revision 2.32  2007/06/07 12:36:22  fabiankeil
- Apply Roland's 29_usermanual.dpatch to fix a bunch
- of syntax errors I collected over the last months.
-
- Revision 2.31  2007/06/02 14:01:37  fabiankeil
- Start to document forward-override{}.
-
- Revision 2.30  2007/04/25 15:10:36  fabiankeil
- - Describe installation for FreeBSD.
- - Start to document taggers and tag patterns.
- - Don't confuse devils and daemons.
-
- Revision 2.29  2007/04/05 11:47:51  fabiankeil
- Some updates regarding header filtering,
- handling of compressed content and redirect's
- support for pcrs commands.
-
- Revision 2.28  2006/12/10 23:42:48  hal9
- Fix various typos reported by Adam P. Thanks.
-
- Revision 2.27  2006/11/14 01:57:47  hal9
- Dump all docs prior to 3.0.6 release. Various minor changes to faq and user
- manual.
-
- Revision 2.26  2006/10/24 11:16:44  hal9
- Add new filters.
-
- Revision 2.25  2006/10/18 10:50:33  hal9
- Add note that since filters are off in Cautious, compression is ON. Turn off
- compression to make filters work on all sites.
-
- Revision 2.24  2006/10/03 11:13:54  hal9
- More references to the new filters. Include html this time around.
-
- Revision 2.23  2006/10/02 22:43:53  hal9
- Contains new filter definitions from Fabian, and few other miscellaneous
- touch-ups.
-
- Revision 2.22  2006/09/22 01:27:55  hal9
- Final commit of probably various minor changes here and there. Unless
- something changes this should be ready for pending release.
-
- Revision 2.21  2006/09/20 03:21:36  david__schmidt
- Just the tiniest tweak.  Wafer thin!
-
- Revision 2.20  2006/09/10 14:53:54  hal9
- Results of spell check. User manual has some updates to standard.actions file
- info.
-
- Revision 2.19  2006/09/08 12:19:02  fabiankeil
- Adjust hide-if-modified-since example values
- to reflect the recent changes.
-
- Revision 2.18  2006/09/08 02:38:57  hal9
- Various changes:
-  -Fix a number of broken links.
-  -Migrate the new Windows service command line options, and reference as
-   needed.
-  -Rebuild so that can be used with the new "user-manual" config capabilities.
-  -Etc.
-
- Revision 2.17  2006/09/05 13:25:12  david__schmidt
- Add Windows service invocation stuff (duplicated) in FAQ and in user manual under Windows startup.  One probably ought to reference the other.
-
- Revision 2.16  2006/09/02 12:49:37  hal9
- Various small updates for new actions, filterfiles, etc.
-
- Revision 2.15  2006/08/30 11:15:22  hal9
- More work on the new actions, especially filter-*-headers, and What's New
- section. User Manual is close to final form for 3.0.4 release. Some tinkering
- and proof reading left to do.
-
- Revision 2.14  2006/08/29 10:59:36  hal9
- Add a "Whats New in this release" Section. Further work on multiple filter
- files, and assorted other minor changes.
-
- Revision 2.13  2006/08/22 11:04:59  hal9
- Silence warnings and errors. This should build now. New filters were only
- stubbed in. More to be done.
-
- Revision 2.12  2006/08/14 08:40:39  fabiankeil
- Documented new actions that were part of
- the "minor Privoxy improvements".
-
- Revision 2.11  2006/07/18 14:48:51  david__schmidt
- Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- with what was really the latest development (the v_3_0_branch branch)
-
- Revision 1.123.2.43  2005/05/23 09:59:10  hal9
- Fix typo 'loose'
-
- Revision 1.123.2.42  2004/12/04 14:39:57  hal9
- Fix two minor typos per bug SF report.
-
- Revision 1.123.2.41  2004/03/23 12:58:42  oes
- Fixed an inaccuracy
-
- Revision 1.123.2.40  2004/02/27 12:48:49  hal9
- Add comment re: redirecting to local file system for set-image-blocker may
- is dependent on browser.
-
- Revision 1.123.2.39  2004/01/30 22:31:40  oes
- Added a hint re bookmarklets to Quickstart section
-
- Revision 1.123.2.38  2004/01/30 16:47:51  oes
- Some minor clarifications
-
- Revision 1.123.2.37  2004/01/29 22:36:11  hal9
- Updates for no longer filtering text/plain, and demoronizer default settings,
- and copyright notice dates.
-
- Revision 1.123.2.36  2003/12/10 02:26:26  hal9
- Changed the demoronizer filter description.
-
- Revision 1.123.2.35  2003/11/06 13:36:37  oes
- Updated link to nightly CVS tarball
-
- Revision 1.123.2.34  2003/06/26 23:50:16  hal9
- Add a small bit on filtering and problems re: source code being corrupted.
-
- Revision 1.123.2.33  2003/05/08 18:17:33  roro
- Use apt-get instead of dpkg to install Debian package, which is more
- solid, uses the correct and most recent Debian version automatically.
-
- Revision 1.123.2.32  2003/04/11 03:13:57  hal9
- Add small note about only one filterfile (as opposed to multiple actions
- files).
-
- Revision 1.123.2.31  2003/03/26 02:03:43  oes
- Updated hard-coded copyright dates
-
- Revision 1.123.2.30  2003/03/24 12:58:56  hal9
- Add new section on Predefined Filters.
-
- Revision 1.123.2.29  2003/03/20 02:45:29  hal9
- More problems with \-\-chroot causing markup problems :(
-
- Revision 1.123.2.28  2003/03/19 00:35:24  hal9
- Manual edit of revision log because 'chroot' (even inside a comment) was
- causing Docbook to hang here (due to double hyphen and the processor thinking
- it was a comment).
-
- Revision 1.123.2.27  2003/03/18 19:37:14  oes
- s/Advanced|Radical/Adventuresome/g to avoid complaints re fun filter
-
- Revision 1.123.2.26  2003/03/17 16:50:53  oes
- Added documentation for new chroot option
-
- Revision 1.123.2.25  2003/03/15 18:36:55  oes
- Adapted to the new filters
-
- Revision 1.123.2.24  2002/11/17 06:41:06  hal9
- Move default profiles table from FAQ to U-M, and other minor related changes.
- Add faq on cookies.
-
- Revision 1.123.2.23  2002/10/21 02:32:01  hal9
- Updates to the user.action examples section. A few new ones.
-
- Revision 1.123.2.22  2002/10/12 00:51:53  hal9
- Add demoronizer to filter section.
-
- Revision 1.123.2.21  2002/10/10 04:09:35  hal9
- s/Advanced/Radical/ and added very brief note.
-
- Revision 1.123.2.20  2002/10/10 03:49:21  hal9
- Add notes to session-cookies-only and Quickstart about pre-existing
- cookies. Also, note content-cookies work differently.
-
- Revision 1.123.2.19  2002/09/26 01:25:36  hal9
- More explanation on Privoxy patterns, more on content-cookies and SSL.
-
- Revision 1.123.2.18  2002/08/22 23:47:58  hal9
- Add 'Documentation' to Privoxy Menu shot in Configuration section to match
- CGIs.
-
- Revision 1.123.2.17  2002/08/18 01:13:05  hal9
- Spell checked (only one typo this time!).
-
- Revision 1.123.2.16  2002/08/09 19:20:54  david__schmidt
- Update to Mac OS X startup script name
-
- Revision 1.123.2.15  2002/08/07 17:32:11  oes
- Converted some internal links from ulink to link for PDF creation; no content changed
-
- Revision 1.123.2.14  2002/08/06 09:16:13  oes
- Nits re: actions file download
-
- Revision 1.123.2.13  2002/08/02 18:23:19  g_sauthoff
- Just 2 small corrections to the Gentoo sections
-
- Revision 1.123.2.12  2002/08/02 18:17:21  g_sauthoff
- Added 2 Gentoo sections
-
- Revision 1.123.2.11  2002/07/26 15:20:31  oes
- - Added version info to title
- - Added info on new filters
- - Revised parts of the filter file tutorial
- - Added info on where to get updated actions files
-
- Revision 1.123.2.10  2002/07/25 21:42:29  hal9
- Add brief notes on not proxying non-HTTP protocols.
-
- Revision 1.123.2.9  2002/07/11 03:40:28  david__schmidt
-
- Updated Mac OS X sections due to installation location change
-
- Revision 1.123.2.8  2002/06/09 16:36:32  hal9
- Clarifications on filtering and MIME. Hardcode 'latest release' in index.html.
-
- Revision 1.123.2.7  2002/06/09 00:29:34  hal9
- Touch ups on filtering, in actions section and Anatomy.
-
- Revision 1.123.2.6  2002/06/06 23:11:03  hal9
- Fix broken link. Linkchecked all docs.
-
- Revision 1.123.2.5  2002/05/29 02:01:02  hal9
- This is break out of the entire config section from u-m, so it can
- eventually be used to generate the comments, etc in the main config file
- so that these are in sync with each other.
-
- Revision 1.123.2.4  2002/05/27 03:28:45  hal9
- Ooops missed something from David.
-
- Revision 1.123.2.3  2002/05/27 03:23:17  hal9
- Fix FIXMEs for OS2 and Mac OS X startup. Fix Redhat typos (should be Red Hat).
- That's a wrap, I think.
-
- Revision 1.123.2.2  2002/05/26 19:02:09  hal9
- Move Amiga stuff around to take of FIXME in start up section.
-
- Revision 1.123.2.1  2002/05/26 17:04:25  hal9
- -Spellcheck, very minor edits, and sync across branches
-
- Revision 1.123  2002/05/24 23:19:23  hal9
- Include new image (Proxy setup). More fun with guibutton.
- Minor corrections/clarifications here and there.
-
- Revision 1.122  2002/05/24 13:24:08  oes
- Added Bookmarklet for one-click pre-filled access to show-url-info
-
- Revision 1.121  2002/05/23 23:20:17  oes
-  - Changed more (all?) references to actions to the
-    <literal><link> style.
-  - Small fixes in the actions chapter
-  - Small clarifications in the quickstart to ad blocking
-  - Removed <emphasis> from <title>s since the new doc CSS
-    renders them red (bad in TOC).
-
- Revision 1.120  2002/05/23 19:16:43  roro
- Correct Debian specials (installation and startup).
-
- Revision 1.119  2002/05/22 17:17:05  oes
- Added Security hint
-
- Revision 1.118  2002/05/21 04:54:55  hal9
- -New Section: Quickstart to Ad Blocking
- -Reformat Actions Anatomy to match new CGI layout
-
- Revision 1.117  2002/05/17 13:56:16  oes
-  - Reworked & extended Templates chapter
-  - Small changes to Regex appendix
-  - #included authors.sgml into (C) and hist chapter
-
- Revision 1.116  2002/05/17 03:23:46  hal9
- Fixing merge conflict in Quickstart section.
-
- Revision 1.115  2002/05/16 16:25:00  oes
- Extended the Filter File chapter & minor fixes
-
- Revision 1.114  2002/05/16 09:42:50  oes
- More ulink->link, added some hints to Quickstart section
-
- Revision 1.113  2002/05/15 21:07:25  oes
- Extended and further commented the example actions files
-
- Revision 1.112  2002/05/15 03:57:14  hal9
- Spell check. A few minor edits here and there for better syntax and
- clarification.
-
- Revision 1.111  2002/05/14 23:01:36  oes
- Fixing the fixes   
-
- Revision 1.110  2002/05/14 19:10:45  oes
- Restored alphabetical order of actions
-
- Revision 1.109  2002/05/14 17:23:11  oes
- Renamed the prevent-*-cookies actions, extended aliases section and moved it before the example AFs
-
- Revision 1.108  2002/05/14 15:29:12  oes
- Completed proofreading the actions chapter
-
- Revision 1.107  2002/05/12 03:20:41  hal9
- Small clarifications for 127.0.0.1 vs localhost for listen-address since this
- apparently an important distinction for some OS's.
-
- Revision 1.106  2002/05/10 01:48:20  hal9
- This is mostly proposed copyright/licensing additions and changes. Docs
- are still GPL, but licensing and copyright are more visible. Also, copyright
- changed in doc header comments (eliminate references to JB except FAQ).
-
- Revision 1.105  2002/05/05 20:26:02  hal9
- Sorting out license vs copyright in these docs.
-
- Revision 1.104  2002/05/04 08:44:45  swa
- bumped version
-
- Revision 1.103  2002/05/04 00:40:53  hal9
- -Remove the TOC first page kludge. It's fixed proper now in ldp.dsl.in.
- -Some minor additions to Quickstart.
-
- Revision 1.102  2002/05/03 17:46:00  oes
- Further proofread & reactivated short build instructions
-
- Revision 1.101  2002/05/03 03:58:30  hal9
- Move the user-manual config directive to top of section. Add note about
- Privoxy needing read permissions for configs, and write for logs.
-
- Revision 1.100  2002/04/29 03:05:55  hal9
- Add clarification on differences of new actions files.
-
- Revision 1.99  2002/04/28 16:59:05  swa
- more structure in starting section
-
- Revision 1.98  2002/04/28 05:43:59  hal9
- This is the break up of configuration.html into multiple files. This
- will probably break links elsewhere :(
-
- Revision 1.97  2002/04/27 21:04:42  hal9
- -Rewrite of Actions File example.
- -Add section for user-manual directive in config.
-
- Revision 1.96  2002/04/27 05:32:00  hal9
- -Add short section to Filter Files to tie in with +filter action.
- -Start rewrite of examples in Actions Examples (not finished).
-
- Revision 1.95  2002/04/26 17:23:29  swa
- bookmarks cleaned, changed structure of user manual, screen and programlisting cleanups, and numerous other changes that I forgot
-
- Revision 1.94  2002/04/26 05:24:36  hal9
- -Add most of Andreas suggestions to Chain of Events section.
- -A few other minor corrections and touch up.
-
- Revision 1.92  2002/04/25 18:55:13  hal9
- More catchups on new actions files, and new actions names.
- Other assorted cleanups, and minor modifications.
-
- Revision 1.91  2002/04/24 02:39:31  hal9
- Add 'Chain of Events' section.
-
- Revision 1.90  2002/04/23 21:41:25  hal9
- Linuxconf is deprecated on RH, substitute chkconfig.
-
- Revision 1.89  2002/04/23 21:05:28  oes
- Added hint for startup on Red Hat
-
- Revision 1.88  2002/04/23 05:37:54  hal9
- Add AmigaOS install stuff.
-
- Revision 1.87  2002/04/23 02:53:15  david__schmidt
- Updated Mac OS X installation section
- Added a few English tweaks here an there
-
- Revision 1.86  2002/04/21 01:46:32  hal9
- Re-write actions section.
-
- Revision 1.85  2002/04/18 21:23:23  hal9
- Fix ugly typo (mine).
-
- Revision 1.84  2002/04/18 21:17:13  hal9
- Spell Redhat correctly (ie Red Hat). A few minor grammar corrections.
-
- Revision 1.83  2002/04/18 18:21:12  oes
- Added RPM install detail
-
- Revision 1.82  2002/04/18 12:04:50  oes
- Cosmetics
-
- Revision 1.81  2002/04/18 11:50:24  oes
- Extended Install section - needs fixing by packagers
-
- Revision 1.80  2002/04/18 10:45:19  oes
- Moved text to buildsource.sgml, renamed some filters, details
-
- Revision 1.79  2002/04/18 03:18:06  hal9
- Spellcheck, and minor touchups.
-
- Revision 1.78  2002/04/17 18:04:16  oes
- Proofreading part 2
-
- Revision 1.77  2002/04/17 13:51:23  oes
- Proofreading, part one
-
- Revision 1.76  2002/04/16 04:25:51  hal9
- -Added 'Note to Upgraders' and re-ordered the 'Quickstart' section.
- -Note about proxy may need requests to re-read config files.
-
- Revision 1.75  2002/04/12 02:08:48  david__schmidt
- Remove OS/2 building info... it is already in the developer-manual
-
- Revision 1.74  2002/04/11 00:54:38  hal9
- Add small section on submitting actions.
-
- Revision 1.73  2002/04/10 18:45:15  swa
- generated
-
- Revision 1.72  2002/04/10 04:06:19  hal9
- Added actions feedback  to Bookmarklets section
-
- Revision 1.71  2002/04/08 22:59:26  hal9
- Version update. Spell chkconfig correctly :)
-
- Revision 1.70  2002/04/08 20:53:56  swa
- ?
-
- Revision 1.69  2002/04/06 05:07:29  hal9
- -Add privoxy-man-page.sgml, for man page.
- -Add authors.sgml for AUTHORS (and p-authors.sgml)
- -Reworked various aspects of various docs.
- -Added additional comments to sub-docs.
-
- Revision 1.68  2002/04/04 18:46:47  swa
- consistent look. reuse of copyright, history et. al.
-
- Revision 1.67  2002/04/04 17:27:57  swa
- more single file to be included at multiple points. make maintaining easier
-
- Revision 1.66  2002/04/04 06:48:37  hal9
- Structural changes to allow for conditional inclusion/exclusion of content
- based on entity toggles, e.g. 'entity % p-not-stable  "INCLUDE"'. And
- definition of internal entities, e.g. 'entity p-version "2.9.13"' that will
- eventually be set by Makefile.
- More boilerplate text for use across multiple docs.
-
- Revision 1.65  2002/04/03 19:52:07  swa
- enhance squid section due to user suggestion
-
- Revision 1.64  2002/04/03 03:53:43  hal9
- A few minor bug fixes, and touch ups. Ready for review.
-
- Revision 1.63  2002/04/01 16:24:49  hal9
- Define entities to include boilerplate text. See doc/source/*.
-
- Revision 1.62  2002/03/30 04:15:53  hal9
- - Fix privoxy.org/config links.
- - Paste in Bookmarklets from Toggle page.
- - Move Quickstart nearer top, and minor rework.
-
- Revision 1.61  2002/03/29 01:31:08  hal9
- Minor update.
-
- Revision 1.60  2002/03/27 01:57:34  hal9
- Added more to Anatomy section.
-
- Revision 1.59  2002/03/27 00:54:33  hal9
- Touch up intro for new name.
-
- Revision 1.58  2002/03/26 22:29:55  swa
- we have a new homepage!
-
- Revision 1.57  2002/03/24 20:33:30  hal9
- A few minor catch ups with name change.
-
- Revision 1.56  2002/03/24 16:17:06  swa
- configure needs to be generated.
-
- Revision 1.55  2002/03/24 16:08:08  swa
- we are too lazy to make a block-built
- privoxy logo. hence removed the option.
-
- Revision 1.54  2002/03/24 15:46:20  swa
- name change related issue.
-
- Revision 1.53  2002/03/24 11:51:00  swa
- name change. changed filenames.
-
- Revision 1.52  2002/03/24 11:01:06  swa
- name change
-
- Revision 1.51  2002/03/23 15:13:11  swa
- renamed every reference to the old name with foobar.
- fixed "application foobar application" tag, fixed
- "the foobar" with "foobar". left junkbustser in cvs
- comments and remarks to history untouched.
-
- Revision 1.50  2002/03/23 05:06:21  hal9
- Touch up.
-
- Revision 1.49  2002/03/21 17:01:05  hal9
- New section in Appendix.
-
- Revision 1.48  2002/03/12 06:33:01  hal9
- Catching up to Andreas and re_filterfile changes.
-
- Revision 1.47  2002/03/11 13:13:27  swa
- correct feedback channels
-
- Revision 1.46  2002/03/10 00:51:08  hal9
- Added section on JB internal pages in Appendix.
-
- Revision 1.45  2002/03/09 17:43:53  swa
- more distros
-
- Revision 1.44  2002/03/09 17:08:48  hal9
- New section on Jon's actions file editor, and move some stuff around.
-
- Revision 1.43  2002/03/08 00:47:32  hal9
- Added imageblock{pattern}.
-
- Revision 1.42  2002/03/07 18:16:55  swa
- looks better
-
- Revision 1.41  2002/03/07 16:46:43  hal9
- Fix a few markup problems for jade.
-
- Revision 1.40  2002/03/07 16:28:39  swa
- provide correct feedback channels
-
- Revision 1.39  2002/03/06 16:19:28  hal9
- Note on perceived filtering slowdown per FR.
-
- Revision 1.38  2002/03/05 23:55:14  hal9
- Stupid I did it again. Double hyphen in comment breaks jade.
-
- Revision 1.37  2002/03/05 23:53:49  hal9
- jade barfs on '- -' embedded in comments. - -user option broke it.
-
- Revision 1.36  2002/03/05 22:53:28  hal9
- Add new - - user option.
-
- Revision 1.35  2002/03/05 00:17:27  hal9
- Added section on command line options.
-
- Revision 1.34  2002/03/04 19:32:07  oes
- Changed default port to 8118
-
- Revision 1.33  2002/03/03 19:46:13  hal9
- Emphasis on where/how to report bugs, etc
-
- Revision 1.32  2002/03/03 09:26:06  joergs
- AmigaOS changes, config is now loaded from PROGDIR: instead of
- AmiTCP:db/junkbuster/ if no configuration file is specified on the
- command line.
-
- Revision 1.31  2002/03/02 22:45:52  david__schmidt
- Just tweaking
-
- Revision 1.30  2002/03/02 22:00:14  hal9
- Updated 'New Features' list. Ran through spell-checker.
-
- Revision 1.29  2002/03/02 20:34:07  david__schmidt
- Update OS/2 build section
-
- Revision 1.28  2002/02/24 14:34:24  jongfoster
- Formatting changes.  Now changing the doctype to DocBook XML 4.1
- will work - no other changes are needed.
-
- Revision 1.27  2002/01/11 14:14:32  hal9
- Added a very short section on Templates
-
- Revision 1.26  2002/01/09 20:02:50  hal9
- Fix bug re: auto-detect config file changes.
-
- Revision 1.25  2002/01/09 18:20:30  hal9
- Touch ups for *.action files.
-
- Revision 1.24  2001/12/02 01:13:42  hal9
- Fix typo.
-
- Revision 1.23  2001/12/02 00:20:41  hal9
- Updates for recent changes.
-
- Revision 1.22  2001/11/05 23:57:51  hal9
- Minor update for startup now daemon mode.
-
- Revision 1.21  2001/10/31 21:11:03  hal9
- Correct 2 minor errors
-
- Revision 1.18  2001/10/24 18:45:26  hal9
- *** empty log message ***
-
- Revision 1.17  2001/10/24 17:10:55  hal9
- Catching up with Jon's recent work, and a few other things.
-
- Revision 1.16  2001/10/21 17:19:21  swa
- wrong url in documentation
-
- Revision 1.15  2001/10/14 23:46:24  hal9
- Various minor changes. Fleshed out SEE ALSO section.
-
- Revision 1.13  2001/10/10 17:28:33  hal9
- Very minor changes.
-
- Revision 1.12  2001/09/28 02:57:04  hal9
- Ditto :/
-
- Revision 1.11  2001/09/28 02:25:20  hal9
- Ditto.
-
- Revision 1.9  2001/09/27 23:50:29  hal9
- A few changes. A short section on regular expression in appendix.
-
- Revision 1.8  2001/09/25 00:34:59  hal9
- Some additions, and re-arranging.
-
- Revision 1.7  2001/09/24 14:31:36  hal9
- Diddling.
-
- Revision 1.6  2001/09/24 14:10:32  hal9
- Including David's OS/2 installation instructions.
-
- Revision 1.2  2001/09/13 15:27:40  swa
- cosmetics
-
- Revision 1.1  2001/09/12 15:36:41  swa
- source files for junkbuster documentation
-
- Revision 1.3  2001/09/10 17:43:59  swa
- first proposal of a structure.
-
- Revision 1.2  2001/06/13 14:28:31  swa
- docs should have an author.
-
- Revision 1.1  2001/06/13 14:20:37  swa
- first import of project's documentation for the webserver.
-
- -->
-
-</article>
diff --git a/external/privoxy/doc/source/webserver/index.sgml b/external/privoxy/doc/source/webserver/index.sgml
deleted file mode 100644
index ef63867..0000000
--- a/external/privoxy/doc/source/webserver/index.sgml
+++ /dev/null
@@ -1,372 +0,0 @@
-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
-<!entity % dummy "IGNORE"> 
-<!entity p-intro SYSTEM "privoxy.sgml">
-<!entity contacting SYSTEM "contacting.sgml">
-<!entity history SYSTEM "history.sgml">
-<!entity copyright SYSTEM "copyright.sgml">
-<!entity license SYSTEM "license.sgml">
-<!entity p-version "3.0.11">
-<!entity p-status "stable">
-<!entity % p-not-stable "IGNORE">
-<!entity % p-stable "INCLUDE">
-<!entity  my-copy "&copy;">        <!-- kludge for docbook2man            -->
-<!entity % p-homepage "IGNORE">    <!-- toggle for webserver index.html   -->
-<!entity % p-index "IGNORE">       <!-- toggle for local doc index        -->
-]>
-<!--
- File        :  $Source: /cvsroot/ijbswa/current/doc/source/webserver/index.sgml,v $
-
- Purpose     :  Index file of the project's homepage and also documentation index
-                This file belongs into
-                ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-                
- $Id: index.sgml,v 2.9 2009/02/19 14:12:02 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers <ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx>
- See LICENSE.
-
- ========================================================================
- NOTE: Please read developer-manual/documentation.html before touching 
- anything in this, or other Privoxy documentation. 
- ========================================================================
-
- Note: This is the Privoxy home page *and* builds a page that can be 
- used with local documentation as a focal point for docs or other points
- of interest. The Makefile is adding additional meta data and content via
- perl.
-
- Generates: index.html, for webserver home page.
-            privoxy-index.html, for packaging with docs
- 
--->
-
-<article id="index">
-<artheader>
- <title>Privoxy - <![%p-homepage;[Home Page]]><![%p-index;[The Privacy Enhancing Proxy]]></title>
- <![%p-index;[<subtitle>Project Index Page v&p-version;</subtitle>]]>
-
-<!-- copyright is at bottom of page -->
-
- <keywordset>
-  <keyword>privoxy</keyword> <keyword>HTTP</keyword> <keyword>proxy</keyword> <keyword>privacy</keyword>
-  <keyword>popups</keyword>  <keyword>po-ups</keyword> <keyword>HTML</keyword> <keyword>JavaScript</keyword>
-  <keyword>cleaning</keyword> <keyword>blocking</keyword> <keyword>cleaner</keyword> <keyword>blocker</keyword>
-  <keyword>filter</keyword> <keyword>proxy</keyword> <keyword>junk</keyword> <keyword>ad</keyword>
-  <keyword>advertisement</keyword> <keyword>banner</keyword> <keyword>webbugs</keyword>
-  <keyword>web-bugs</keyword> <keyword>werbung</keyword> <keyword>junkbusters</keyword>
-  <keyword>junkbuster</keyword>
- </keywordset>
-
- <abstract>
-
-<![%dummy;[
-  <para>
-   <comment>
-    This is here to keep vim syntax file from breaking :/
-    If I knew enough to fix it, I would.
-    PLEASE DO NOT REMOVE! HB: hal@xxxxxxxxxx
-   </comment>
-  </para>
-]]>
-
-<!-- Include privoxy.sgml boilerplate: -->
-  &p-intro;
-<!-- end boilerplate -->
-
-<![%p-homepage;[
-  <para>
-   The most recent release is <ulink url="announce.txt">&p-version; (&p-status;)</ulink>. 
-  </para>
-]]>
-
- </abstract>
-</artheader>
-
-<!--   ~~~~~       New section      ~~~~~     -->
-
-
-<sect1 renderas="sect2" id="download" label=""><title>Download</title>
-<para>
- <itemizedlist>
-  <listitem>
-   <para>
-    <ulink url="https://sourceforge.net/project/showfiles.php?group_id=11118";>Download recent releases</ulink>
-   </para>
-  </listitem>
- <!-- 
- deprecated
-  <listitem>
-   <para>
-    <ulink url="http://cvs.sourceforge.net/cvstarballs/ijbswa-cvsroot.tar.bz2";>Download the latest CVS snapshot (source tarball)</ulink>
-   </para>
-  </listitem>
- --> 
-  <listitem>
-   <para>
-    <ulink url="user-manual/quickstart.html">Quickstart after installation</ulink>
-   </para>
-  </listitem>
- </itemizedlist>
-</para>
-</sect1>
-
-<sect1 renderas="sect2" id="docs" label=""><title>Documentation</title>
-<para>
- <itemizedlist>
-  <listitem>
-   <para>
-    <ulink url="user-manual/index.html">User manual</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="faq/index.html">Frequently Asked Questions</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="developer-manual/index.html">Developer Manual</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="man-page/privoxy-man-page.html">Classic Man Page</ulink>
-   </para>
-  </listitem>
- </itemizedlist>
-</para>
-</sect1>
-
-<sect1 renderas="sect2" id="moreinfo" label=""><title>More information</title>
-<para>
- <itemizedlist>
-  <listitem>
-   <para>
-    <ulink url="user-manual/contact.html">Support &amp; Service</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="user-manual/copyright.html">Copyright, License, History & Authors</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="user-manual/introduction.html#FEATURES">List of (new) Features</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="https://sourceforge.net/projects/ijbswa/";>The project page</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <ulink url="user-manual/seealso.html">Related links</ulink>
-   </para>
-  </listitem>
-  <listitem>
-   <para>
-    <!-- please leave this link absolute so this file can be bundled with -->
-    <!-- documentation and still used locally -->
-    <ulink url="http://privoxy.org/team/index.html";>Pictures of the Privoxy Team</ulink>
-   </para>
-  </listitem>
- </itemizedlist>
-</para>
-</sect1>
-
-<![%p-homepage;[
-<!--   ~~~~~       New section      ~~~~~     -->
-<sect1 label="">
-<!-- dummy section, for spacing -->
-<title></title>
-<para>
-<!-- show the SF logo per AUP -->
-<informaltable frame=none label="" pgwide="1">
- <tgroup cols=1 align="center" colsep=1 rowsep=1>
-  <colspec colname=c1 align="center">
-  <tbody>
-   <row>
-    <entry align="center">Privoxy is developed on:</entry>
-   </row>
-   <row>
-    <entry align="center">
-     <ulink url="http://sourceforge.net/";>
-      <inlinegraphic  fileref="http://sourceforge.net/sflogo.php?group_id=11118&#38;type=1&#38;dummy=.gif";></inlinegraphic>
-     </ulink>
-    </entry>
-   </row>
-  </tbody>
- </tgroup>
-</informaltable>
-</para>
-]]>
-
-<!--
-<informalfigure pgwide="1">
- <ulink url="http://sourceforge.net/";>
-  <inlinegraphic align="center" fileref="http://sourceforge.net/sflogo.php?group_id=11118&#38;type=1&#38;dummy=.gif";></inlinegraphic>
- </ulink>
-</informalfigure>
--->
-
-
-<![%p-index;[
-<sect1 label=""><title></title>
-<!-- dummy section for layout and spacing -->
-]]>
-
-<!-- Formal copyright markup does not work here. HB. -->
-<!-- NOTE: I could not get docbook to completely ignore &copy; -->
-<!-- GNUMakefile is inserting this now -->
-<para>
- <subscript>
-  Copyright __copy 2001-2009 by Privoxy Developers
- </subscript>
-</para>
-
-</sect1>
- 
- <!--
-
- This program is free software; you can redistribute it 
- and/or modify it under the terms of the GNU General
- Public License as published by the Free Software
- Foundation; either version 2 of the License, or (at
- your option) any later version.
-
- This program is distributed in the hope that it will
- be useful, but WITHOUT ANY WARRANTY; without even the
- implied warranty of MERCHANTABILITY or FITNESS FOR A
- PARTICULAR PURPOSE.  See the GNU General Public
- License for more details.
-
- The GNU General Public License should be included with
- this file.  If not, you can view it at
- http://www.gnu.org/copyleft/gpl.html
- or write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-
- $Log: index.sgml,v $
- Revision 2.9  2009/02/19 14:12:02  fabiankeil
- Change link to the project page to https://.
-
- Revision 2.8  2009/02/12 16:09:44  fabiankeil
- Declare the code stable.
-
- Revision 2.7  2009/01/13 16:50:36  fabiankeil
- The standard.action file is gone.
-
- Revision 2.6  2008/08/16 08:51:28  fabiankeil
- Update version-related entities.
-
- Revision 2.5  2008/06/18 17:42:13  fabiankeil
- - Remove link to soon-to-be-removed PDFs.
- - Use https for the download URL.
- - Update copyright year.
-
- Revision 2.4  2006/08/28 01:08:57  hal9
- Remove reference to defunct nightly cvs tarballs.
-
- Revision 2.3  2006/07/18 14:48:51  david__schmidt
- Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- with what was really the latest development (the v_3_0_branch branch)
-
- Revision 1.16.2.12  2004/01/30 14:33:41  oes
- Vi(m) syntax voodoo now hidden; copyright updated
-
- Revision 1.16.2.11  2003/08/16 12:16:30  hal9
- Update cvs tarball URL (to bz2)
-
- Revision 1.16.2.10  2003/03/28 03:33:09  hal9
- Include link for announce.txt, and change handling of &copy;.
-
- Revision 1.16.2.9  2003/03/26 02:03:45  oes
- Updated hard-coded copyright dates
-
- Revision 1.16.2.8  2002/08/16 03:05:42  hal9
- Put all pdf docs in a zip archive now.
-
- Revision 1.16.2.7  2002/08/14 16:40:00  hal9
- Add links to pdf docs.
-
- Revision 1.16.2.6  2002/07/26 15:22:15  oes
- Most recent release now inserted automatically (again)
-
- Revision 1.16.2.5  2002/06/09 18:59:16  hal9
- Correct typo.
-
- Revision 1.16.2.4  2002/06/09 16:36:33  hal9
- Clarifications on filtering and MIME. Hardcode 'latest release' in index.html.
-
- Revision 1.16.2.3  2002/05/28 02:31:38  hal9
- New file, privoxy-index.html, for bundling with documentation. Built from
- index.sgml, like homepage, but with content toggles more suitable for this use.
-
- Revision 1.16.2.2  2002/05/26 22:04:46  hal9
- Add several comments, and reworded 'most recent release', ie we don't officially
- release odd numbered versions.
-
- Revision 1.16.2.1  2002/05/26 17:40:02  hal9
- Make team pictures link absolute for docs.
-
- Revision 1.16  2002/05/24 10:06:31  oes
- Nit
-
- Revision 1.15  2002/05/24 00:02:05  oes
- Tried to make more useful and concise:
-   Reordered, no more TOC, link to instead of include info,
-   added some links. Should we use the free space to better
-   describe what Privoxy is good for?
-
- Revision 1.14  2002/05/10 01:48:20  hal9
- This is mostly proposed copyright/licensing additions and changes. Docs
- are still GPL, but licensing and copyright are more visible. Also, copyright
- changed in doc header comments (eliminate references to JB except FAQ).
-
- Revision 1.13  2002/05/05 20:29:59  hal9
- Ooops, fixing an accidental delete of title element.
-
- Revision 1.12  2002/05/05 20:26:02  hal9
- Sorting out license vs copyright in these docs.
-
- Revision 1.11  2002/05/04 08:44:45  swa
- bumped version
-
- Revision 1.10  2002/04/26 17:24:31  swa
- bookmarks cleaned, changed structure of user manual, screen and programlisting cleanups, and numerous other changes that I forgot
-
- Revision 1.9  2002/04/14 01:00:07  hal9
- Fix the logo properly with docbook.
-
- Revision 1.7  2002/04/12 10:11:53  swa
- changed bookmarklet text so that users can easily find the bookmark
-
- Revision 1.6  2002/04/12 08:34:18  swa
- added link to new page
-
- Revision 1.5  2002/04/12 02:05:19  david__schmidt
- Tiny English fix: infos -> info
- Add copyright date 2002
-
- Revision 1.4  2002/04/08 20:42:07  swa
- fixed JB spelling
-
- Revision 1.3  2002/04/07 20:27:18  hal9
- Fix meta data.
-
- Revision 1.2  2002/04/07 09:06:45  swa
- users can now completely browse offline
-
- Revision 1.1  2002/04/07 08:10:48  swa
- create some of the webserver docs
- automatically (in particular if
- those docs recycle other documentation
- fragments). Now committed webserver's
- index file.
-
-
- -->
-
-</article>
diff --git a/external/privoxy/doc/webserver/README.txt b/external/privoxy/doc/webserver/README.txt
deleted file mode 100644
index 4221e3a..0000000
--- a/external/privoxy/doc/webserver/README.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-All files contained in this directory should eventually be
-on the project's homepage 
-
-   ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-
-which is indeed http://ijbswa.sourceforge.net 
-and http://www.privoxy.org/.
-
--Stefan, April 2002
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/announce.txt b/external/privoxy/doc/webserver/announce.txt
deleted file mode 100644
index be37205..0000000
--- a/external/privoxy/doc/webserver/announce.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-                 Announcing Privoxy v.3.0.12
------------------------------------------------------------------
-
-Privoxy 3.0.12-stable is primarily a bugfix release.
-
-See http://www.privoxy.org/3.0.12/user-manual/whatsnew.html for details.
-
---------------------------------------------------------------------
-ChangeLog for Privoxy
---------------------------------------------------------------------
-*** Version 3.0.12  ***
-
-- The socket-timeout option now also works on platforms whose
-  select() implementation modifies the timeout structure.
-  Previously the timeout was triggered even if the connection
-  didn't stall. Reported by cyberpatrol.
-- The Connection: keep-alive code properly deals with files
-  larger than 2GB. Previously the connection was closed too
-  early.
-- The content length for files above 2GB is logged correctly.
-- The user-manual directive on the show-status page links to
-  the documentation location specified with the directive,
-  not to the Privoxy website.
-- When running in daemon mode, Privoxy doesn't log anything
-  to the console unless there are errors before the logfile
-  has been opened.
-- The show-status page prints warnings about invalid directives
-  on the same line as the directives themselves.
-- Fixed several justified (but harmless) compiler warnings,
-  mostly on 64 bit platforms.
-- The mingw32 version explicitly requests the default charset
-  to prevent display problems with some fonts available on more
-  recent Windows versions. Patch by Burberry.
-- The mingw32 version uses the Privoxy icon in the alt-tab
-  windows. Patch by Burberry.
-- The timestamp and the thread id is omitted in the "Fatal error"
-  message box on mingw32.
-- Fixed two related mingw32-only buffer overflows. Triggering
-  them required control over the configuration file, therefore
-  this isn't seen as a security issue.
-- In verbose mode, or if the new option --show-skipped-tests
-  is used, Privoxy-Regression-Test logs skipped tests and the
-  skip reason.
-
-
------------------------------------------------------------------
-About Privoxy:
------------------------------------------------------------------
-
-Privoxy is a non-caching web proxy with advanced filtering capabilities for
-enhancing privacy, modifying web page data and HTTP headers, controlling
-access, and removing ads and other obnoxious Internet junk. Privoxy has a
-flexible configuration and can be customized to suit individual needs and
-tastes. It has application for both stand-alone systems and multi-user
-networks.
-
-Privoxy is Free Software and licensed under the GPL2.
-
-Privoxy is an associated project of Software in the Public Interest (SPI).
-Donations are welcome: http://www.privoxy.org/faq/general.html#DONATE
-
-At present, Privoxy is known to run on Windows(95, 98, ME, 2000,
-XP, Vista), Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and
-others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and
-various other flavors of Unix.
-
-In addition to the core features of ad blocking and cookie management,
-Privoxy provides many supplemental features, that give the end-user
-more control, more privacy and more freedom:
-
-
-    *  Can keep outgoing connections alive and reuse them later on.
-
-    *  Supports tagging which allows to change the behaviour based on client
-       and server headers.
-
-    *  Can be run as an "intercepting" proxy, which obviates the need to
-       configure browsers individually.
-
-    *  Sophisticated actions and filters for manipulating both server and
-       client headers.
-
-    *  Can be chained with other proxies.
-
-    *  Integrated browser based configuration and control utility at
-       http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
-       tracing of rule and filter effects. Remote toggling.
-
-    *  Web page filtering (text replacements, removes banners based on size,
-       invisible "web-bugs", JavaScript and HTML annoyances, pop-up windows,
-       etc.)
-
-    *  Modularized configuration that allows for standard settings and user
-       settings to reside in separate files, so that installing updated actions
-       files won't overwrite individual user settings.
-
-    *  Support for Perl Compatible Regular Expressions in the configuration
-       files, and a more sophisticated and flexible configuration syntax.
-
-    *  Improved cookie management features (e.g. session based cookies).
-
-    *  GIF de-animation.
-
-    *  Bypass many click-tracking scripts (avoids script redirection).
-
-    *  Multi-threaded (POSIX and native threads).
-
-    *  User-customizable HTML templates for most proxy-generated pages (e.g.
-       "blocked" page).
-
-    *  Auto-detection and re-reading of config file changes.
-
-    *  Improved signal handling, and a true daemon mode (Unix).
-    
-    *  Every feature now controllable on a per-site or per-location basis,
-       configuration more powerful and versatile over-all.
-    
-
-Download location: 
-   http://sourceforge.net/project/showfiles.php?group_id=11118
- 
-Home Page: 
-   http://www.privoxy.org/
-
-
-  - Privoxy Developers <ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx>
diff --git a/external/privoxy/doc/webserver/developer-manual/coding.html b/external/privoxy/doc/webserver/developer-manual/coding.html
deleted file mode 100644
index 48259ed..0000000
--- a/external/privoxy/doc/webserver/developer-manual/coding.html
+++ /dev/null
@@ -1,2602 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Coding Guidelines</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Documentation Guidelines"
-HREF="documentation.html"><LINK
-REL="NEXT"
-TITLE="Testing Guidelines"
-HREF="testing.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="documentation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="testing.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CODING"
->4. Coding Guidelines</A
-></H1
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S1"
->4.1. Introduction</A
-></H2
-><P
->This set of standards is designed to make our lives easier.  It is
-    developed with the simple goal of helping us keep the "new and improved
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->" consistent and reliable. Thus making
-    maintenance easier and increasing chances of success of the
-    project.</P
-><P
->And that of course comes back to us as individuals. If we can
-    increase our development and product efficiencies then we can solve more
-    of the request for changes/improvements and in general feel good about
-    ourselves. ;-&#62;</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S2"
->4.2. Using Comments</A
-></H2
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S3"
->4.2.1. Comment, Comment, Comment</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Comment as much as possible without commenting the obvious.
-    For example do not comment "variable_a is equal to variable_b".
-    Instead explain why variable_a should be equal to the variable_b.
-    Just because a person can read code does not mean they will
-    understand why or what is being done. A reader may spend a lot
-    more time figuring out what is going on when a simple comment
-    or explanation would have prevented the extra research. Please
-    help your brother IJB'ers out!</P
-><P
->The comments will also help justify the intent of the code.
-    If the comment describes something different than what the code
-    is doing then maybe a programming error is occurring.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->/* if page size greater than 1k ... */
-if ( page_length() &#62; 1024 )
-{
-    ... "block" the page up ...
-}
-
-/* if page size is small, send it in blocks */
-if ( page_length() &#62; 1024 )
-{
-    ... "block" the page up ...
-}
-
-This demonstrates 2 cases of "what not to do".  The first is a
-"syntax comment".  The second is a comment that does not fit what
-is actually being done.</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S4"
->4.2.2. Use blocks for comments</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Comments can help or they can clutter. They help when they
-    are differentiated from the code they describe. One line
-    comments do not offer effective separation between the comment
-    and the code. Block identifiers do, by surrounding the code
-    with a clear, definable pattern.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->/*********************************************************************
- * This will stand out clearly in your code!
- *********************************************************************/
-if ( this_variable == that_variable )
-{
-   do_something_very_important();
-}
-
-
-/* unfortunately, this may not */
-if ( this_variable == that_variable )
-{
-   do_something_very_important();
-}
-
-
-if ( this_variable == that_variable ) /* this may not either */
-{
-   do_something_very_important();
-}</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Exception:</I
-></SPAN
-></P
-><P
->If you are trying to add a small logic comment and do not
-    wish to "disrupt" the flow of the code, feel free to use a 1
-    line comment which is NOT on the same line as the code.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S5"
->4.2.3. Keep Comments on their own line</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->It goes back to the question of readability. If the comment
-    is on the same line as the code it will be harder to read than
-    the comment that is on its own line.</P
-><P
->There are three exceptions to this rule, which should be
-    violated freely and often: during the definition of variables,
-    at the end of closing braces, when used to comment
-    parameters.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->/*********************************************************************
- * This will stand out clearly in your code,
- * But the second example won't.
- *********************************************************************/
-if ( this_variable == this_variable )
-{
-   do_something_very_important();
-}
-
-if ( this_variable == this_variable ) /*can you see me?*/
-{
-   do_something_very_important(); /*not easily*/
-}
-
-
-/*********************************************************************
- * But, the encouraged exceptions:
- *********************************************************************/
-int urls_read     = 0;     /* # of urls read + rejected */
-int urls_rejected = 0;     /* # of urls rejected */
-
-if ( 1 == X )
-{
-   do_something_very_important();
-}
-
-
-short do_something_very_important(
-   short firstparam,   /* represents something */
-   short nextparam     /* represents something else */ )
-{
-   ...code here...
-
-}   /* -END- do_something_very_important */</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S6"
->4.2.4. Comment each logical step</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Logical steps should be commented to help others follow the
-    intent of the written code and comments will make the code more
-    readable.</P
-><P
->If you have 25 lines of code without a comment, you should
-    probably go back into it to see where you forgot to put
-    one.</P
-><P
->Most "for", "while", "do", etc... loops _probably_ need a
-    comment. After all, these are usually major logic
-    containers.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S7"
->4.2.5. Comment All Functions Thoroughly</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->A reader of the code should be able to look at the comments
-    just prior to the beginning of a function and discern the
-    reason for its existence and the consequences of using it. The
-    reader should not have to read through the code to determine if
-    a given function is safe for a desired use. The proper
-    information thoroughly presented at the introduction of a
-    function not only saves time for subsequent maintenance or
-    debugging, it more importantly aids in code reuse by allowing a
-    user to determine the safety and applicability of any function
-    for the problem at hand. As a result of such benefits, all
-    functions should contain the information presented in the
-    addendum section of this document.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S8"
->4.2.6. Comment at the end of braces if the
-    content is more than one screen length</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Each closing brace should be followed on the same line by a
-    comment that describes the origination of the brace if the
-    original brace is off of the screen, or otherwise far away from
-    the closing brace. This will simplify the debugging,
-    maintenance, and readability of the code.</P
-><P
->As a suggestion , use the following flags to make the
-    comment and its brace more readable:</P
-><P
->use following a closing brace: } /* -END- if() or while ()
-    or etc... */</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->if ( 1 == X )
-{
-   do_something_very_important();
-   ...some long list of commands...
-} /* -END- if x is 1 */
-
-or:
-
-if ( 1 == X )
-{
-   do_something_very_important();
-   ...some long list of commands...
-} /* -END- if ( 1 == X ) */</PRE
-></TD
-></TR
-></TABLE
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S9"
->4.3. Naming Conventions</A
-></H2
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S10"
->4.3.1. Variable Names</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Use all lowercase, and separate words via an underscore
-    ('_'). Do not start an identifier with an underscore. (ANSI C
-    reserves these for use by the compiler and system headers.) Do
-    not use identifiers which are reserved in ANSI C++. (E.g.
-    template, class, true, false, ...). This is in case we ever
-    decide to port Privoxy to C++.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int ms_iis5_hack = 0;</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int msiis5hack = 0; int msIis5Hack = 0;</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S11"
->4.3.2. Function Names</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Use all lowercase, and separate words via an underscore
-    ('_'). Do not start an identifier with an underscore. (ANSI C
-    reserves these for use by the compiler and system headers.) Do
-    not use identifiers which are reserved in ANSI C++. (E.g.
-    template, class, true, false, ...). This is in case we ever
-    decide to port Privoxy to C++.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int load_some_file( struct client_state *csp )</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int loadsomefile( struct client_state *csp )
-int loadSomeFile( struct client_state *csp )</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S12"
->4.3.3. Header file prototypes</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Use a descriptive parameter name in the function prototype
-    in header files. Use the same parameter name in the header file
-    that you use in the c file.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->(.h) extern int load_aclfile( struct client_state *csp );
-(.c) int load_aclfile( struct client_state *csp )</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
->
-<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->(.h) extern int load_aclfile( struct client_state * ); or 
-(.h) extern int load_aclfile(); 
-(.c) int load_aclfile( struct client_state *csp )</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S13"
->4.3.4. Enumerations, and #defines</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Use all capital letters, with underscores between words. Do
-    not start an identifier with an underscore. (ANSI C reserves
-    these for use by the compiler and system headers.)</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->(enumeration) : enum Boolean { FALSE, TRUE };
-(#define) : #define DEFAULT_SIZE 100;</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> We have a standard naming scheme for #defines
-    that toggle a feature in the preprocessor: FEATURE_&#62;, where
-    &#62; is a short (preferably 1 or 2 word) description.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#define FEATURE_FORCE 1
-
-#ifdef FEATURE_FORCE
-#define FORCE_PREFIX blah
-#endif /* def FEATURE_FORCE */</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S14"
->4.3.5. Constants</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Spell common words out entirely (do not remove vowels).</P
-><P
->Use only widely-known domain acronyms and abbreviations.
-    Capitalize all letters of an acronym.</P
-><P
->Use underscore (_) to separate adjacent acronyms and
-    abbreviations. Never terminate a name with an underscore.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#define USE_IMAGE_LIST 1</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#define USE_IMG_LST 1 or 
-#define _USE_IMAGE_LIST 1 or
-#define USE_IMAGE_LIST_ 1 or 
-#define use_image_list 1 or
-#define UseImageList 1</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S15"
->4.4. Using Space</A
-></H2
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S16"
->4.4.1. Put braces on a line by themselves.</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->The brace needs to be on a line all by itself, not at the
-    end of the statement. Curly braces should line up with the
-    construct that they're associated with. This practice makes it
-    easier to identify the opening and closing braces for a
-    block.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->if ( this == that )
-{
-   ...
-}</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
->if ( this == that ) { ... }</P
-><P
->or</P
-><P
->if ( this == that ) { ... }</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> In the special case that the if-statement is
-    inside a loop, and it is trivial, i.e. it tests for a
-    condition that is obvious from the purpose of the block,
-    one-liners as above may optically preserve the loop structure
-    and make it easier to read.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> developer-discretion.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example exception:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->while ( more lines are read )
-{
-   /* Please document what is/is not a comment line here */
-   if ( it's a comment ) continue;
-
-   do_something( line );
-}</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S17"
->4.4.2. ALL control statements should have a
-    block</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Using braces to make a block will make your code more
-    readable and less prone to error. All control statements should
-    have a block defined.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->if ( this == that )
-{
-   do_something();
-   do_something_else();
-}</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
->if ( this == that ) do_something(); do_something_else();</P
-><P
->or</P
-><P
->if ( this == that ) do_something();</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> The first example in "Instead of" will execute
-    in a manner other than that which the developer desired (per
-    indentation). Using code braces would have prevented this
-    "feature". The "explanation" and "exception" from the point
-    above also applies.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S18"
->4.4.3. Do not belabor/blow-up boolean
-    expressions</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->structure-&#62;flag = ( condition );</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
->if ( condition ) { structure-&#62;flag = 1; } else {
-    structure-&#62;flag = 0; }</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> The former is readable and concise. The later
-    is wordy and inefficient. Please assume that any developer new
-    to the project has at least a "good" knowledge of C/C++. (Hope
-    I do not offend by that last comment ... 8-)</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S19"
->4.4.4. Use white space freely because it is
-    free</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Make it readable. The notable exception to using white space
-    freely is listed in the next guideline.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int first_value   = 0;
-int some_value    = 0;
-int another_value = 0;
-int this_variable = 0;
-
-if ( this_variable == this_variable )
-
-first_value = old_value + ( ( some_value - another_value ) - whatever )</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S20"
->4.4.5. Don't use white space around structure
-    operators</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->- structure pointer operator ( "-&#62;" ) - member operator (
-    "." ) - functions and parentheses</P
-><P
->It is a general coding practice to put pointers, references,
-    and function parentheses next to names. With spaces, the
-    connection between the object and variable/function name is not
-    as clear.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->a_struct-&#62;a_member;
-a_struct.a_member;
-function_name();</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-> a_struct -&#62; a_member; a_struct . a_member;
-    function_name ();</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S21"
->4.4.6. Make the last brace of a function stand
-    out</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int function1( ... )
-{
-   ...code...
-   return( ret_code );
-
-}   /* -END- function1 */
-
-
-int function2( ... )
-{
-}   /* -END- function2 */</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
->int function1( ... ) { ...code... return( ret_code ); } int
-    function2( ... ) { }</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> Use 1 blank line before the closing brace and 2
-    lines afterward. This makes the end of function standout to
-    the most casual viewer. Although function comments help
-    separate functions, this is still a good coding practice. In
-    fact, I follow these rules when using blocks in "for", "while",
-    "do" loops, and long if {} statements too. After all whitespace
-    is free!</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> developer-discretion on the number of blank
-    lines. Enforced is the end of function comments.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S22"
->4.4.7. Use 3 character indentions</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->If some use 8 character TABs and some use 3 character TABs,
-    the code can look *very* ragged. So use 3 character indentions
-    only. If you like to use TABs, pass your code through a filter
-    such as "expand -t3" before checking in your code.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->static const char * const url_code_map[256] =
-{
-   NULL, ...
-};
-
-
-int function1( ... )
-{
-   if ( 1 )
-   {
-      return( ALWAYS_TRUE );
-   }
-   else
-   {
-      return( HOW_DID_YOU_GET_HERE );
-   }
-
-   return( NEVER_GETS_HERE );
-
-}</PRE
-></TD
-></TR
-></TABLE
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S23"
->4.5. Initializing</A
-></H2
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S24"
->4.5.1. Initialize all variables</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Do not assume that the variables declared will not be used
-    until after they have been assigned a value somewhere else in
-    the code. Remove the chance of accidentally using an unassigned
-    variable.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->short a_short = 0;
-float a_float  = 0;
-struct *ptr = NULL;</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> It is much easier to debug a SIGSEGV if the
-    message says you are trying to access memory address 00000000
-    and not 129FA012; or array_ptr[20] causes a SIGSEV vs.
-    array_ptr[0].</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> developer-discretion if and only if the
-    variable is assigned a value "shortly after" declaration.</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S25"
->4.6. Functions</A
-></H2
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S26"
->4.6.1. Name functions that return a boolean as a
-    question.</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Value should be phrased as a question that would logically
-    be answered as a true or false statement</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->should_we_block_this();
-contains_an_image();
-is_web_page_blank();</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S27"
->4.6.2. Always specify a return type for a
-    function.</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->The default return for a function is an int. To avoid
-    ambiguity, create a return for a function when the return has a
-    purpose, and create a void return type if the function does not
-    need to return anything.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S28"
->4.6.3. Minimize function calls when iterating by
-    using variables</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->It is easy to write the following code, and a clear argument
-    can be made that the code is easy to understand:</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->for ( size_t cnt = 0; cnt &#60; block_list_length(); cnt++ )
-{
-   ....
-}</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> Unfortunately, this makes a function call for
-    each and every iteration. This increases the overhead in the
-    program, because the compiler has to look up the function each
-    time, call it, and return a value. Depending on what occurs in
-    the block_list_length() call, it might even be creating and
-    destroying structures with each iteration, even though in each
-    case it is comparing "cnt" to the same value, over and over.
-    Remember too - even a call to block_list_length() is a function
-    call, with the same overhead.</P
-><P
->Instead of using a function call during the iterations,
-    assign the value to a variable, and evaluate using the
-    variable.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->size_t len = block_list_length();
-
-for ( size_t cnt = 0; cnt &#60; len; cnt++ )
-{
-   ....
-}</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Exceptions:</I
-></SPAN
-> if the value of block_list_length()
-    *may* change or could *potentially* change, then you must code the
-    function call in the for/while loop.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S29"
->4.6.4. Pass and Return by Const Reference</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->This allows a developer to define a const pointer and call
-    your function. If your function does not have the const
-    keyword, we may not be able to use your function. Consider
-    strcmp, if it were defined as: extern int strcmp( char *s1,
-    char *s2 );</P
-><P
->I could then not use it to compare argv's in main: int main(
-    int argc, const char *argv[] ) { strcmp( argv[0], "privoxy"
-    ); }</P
-><P
->Both these pointers are *const*! If the c runtime library
-    maintainers do it, we should too.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S30"
->4.6.5. Pass and Return by Value</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Most structures cannot fit onto a normal stack entry (i.e.
-    they are not 4 bytes or less). Aka, a function declaration
-    like: int load_aclfile( struct client_state csp )</P
-><P
->would not work. So, to be consistent, we should declare all
-    prototypes with "pass by value": int load_aclfile( struct
-    client_state *csp )</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S31"
->4.6.6. Names of include files</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Your include statements should contain the file name without
-    a path. The path should be listed in the Makefile, using -I as
-    processor directive to search the indicated paths. An exception
-    to this would be for some proprietary software that utilizes a
-    partial path to distinguish their header files from system or
-    other header files.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#include &#60;iostream.h&#62;     /* This is not a local include */
-#include "config.h"       /* This IS a local include */</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Exception:</I
-></SPAN
-></P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->/* This is not a local include, but requires a path element. */ 
-#include &#60;sys/fileName.h&#62;</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> Please! do not add "-I." to the Makefile
-    without a _very_ good reason. This duplicates the #include
-    "file.h" behavior.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S32"
->4.6.7. Provide multiple inclusion
-    protection</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Prevents compiler and linker errors resulting from
-    redefinition of items.</P
-><P
->Wrap each header file with the following syntax to prevent
-    multiple inclusions of the file. Of course, replace PROJECT_H
-    with your file name, with "." Changed to "_", and make it
-    uppercase.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#ifndef PROJECT_H_INCLUDED
-#define PROJECT_H_INCLUDED
- ...
-#endif /* ndef PROJECT_H_INCLUDED */</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S33"
->4.6.8. Use `extern "C"` when appropriate</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->If our headers are included from C++, they must declare our
-    functions as `extern "C"`. This has no cost in C, but increases
-    the potential re-usability of our code.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#ifdef __cplusplus
-extern "C"
-{
-#endif /* def __cplusplus */
-
-... function definitions here ...
-
-#ifdef __cplusplus
-}
-#endif /* def __cplusplus */</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S34"
->4.6.9. Where Possible, Use Forward Struct
-    Declaration Instead of Includes</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Useful in headers that include pointers to other struct's.
-    Modifications to excess header files may cause needless
-    compiles.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->/*********************************************************************
- * We're avoiding an include statement here!
- *********************************************************************/
-struct file_list;
-extern file_list *xyz;</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> If you declare "file_list xyz;" (without the
-    pointer), then including the proper header file is necessary.
-    If you only want to prototype a pointer, however, the header
-    file is unnecessary.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> Use with discretion.</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S35"
->4.7. General Coding Practices</A
-></H2
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S36"
->4.7.1. Turn on warnings</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation</I
-></SPAN
-></P
-><P
->Compiler warnings are meant to help you find bugs. You
-    should turn on as many as possible. With GCC, the switch is
-    "-Wall". Try and fix as many warnings as possible.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S37"
->4.7.2. Provide a default case for all switch
-    statements</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->What you think is guaranteed is never really guaranteed. The
-    value that you don't think you need to check is the one that
-    someday will be passed. So, to protect yourself from the
-    unknown, always have a default step in a switch statement.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->switch( hash_string( cmd ) )
-{
-   case hash_actions_file :
-      ... code ...
-      break;
-
-   case hash_confdir :
-      ... code ...
-      break;
-
-   default :
-      log_error( ... );
-      ... anomaly code goes here ...
-      continue; / break; / exit( 1 ); / etc ...
-
-} /* end switch( hash_string( cmd ) ) */</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> If you already have a default condition, you
-    are obviously exempt from this point. Of note, most of the
-    WIN32 code calls `DefWindowProc' after the switch statement.
-    This API call *should* be included in a default statement.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Another Note:</I
-></SPAN
-> This is not so much a readability issue
-    as a robust programming issue. The "anomaly code goes here" may
-    be no more than a print to the STDERR stream (as in
-    load_config). Or it may really be an abort condition.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> Programmer discretion is advised.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S38"
->4.7.3. Try to avoid falling through cases in a
-    switch statement.</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->In general, you will want to have a 'break' statement within
-    each 'case' of a switch statement. This allows for the code to
-    be more readable and understandable, and furthermore can
-    prevent unwanted surprises if someone else later gets creative
-    and moves the code around.</P
-><P
->The language allows you to plan the fall through from one
-    case statement to another simply by omitting the break
-    statement within the case statement. This feature does have
-    benefits, but should only be used in rare cases. In general,
-    use a break statement for each case statement.</P
-><P
->If you choose to allow fall through, you should comment both
-    the fact of the fall through and reason why you felt it was
-    necessary.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S39"
->4.7.4. Use 'long' or 'short' Instead of
-    'int'</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->On 32-bit platforms, int usually has the range of long. On
-    16-bit platforms, int has the range of short.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> open-to-debate. In the case of most FSF
-    projects (including X/GNU-Emacs), there are typedefs to int4,
-    int8, int16, (or equivalence ... I forget the exact typedefs
-    now). Should we add these to IJB now that we have a "configure"
-    script?</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S40"
->4.7.5. Don't mix size_t and other types</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->The type of size_t varies across platforms. Do not make
-    assumptions about whether it is signed or unsigned, or about
-    how long it is. Do not compare a size_t against another
-    variable of a different type (or even against a constant)
-    without casting one of the values.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S41"
->4.7.6. Declare each variable and struct on its
-    own line.</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->It can be tempting to declare a series of variables all on
-    one line. Don't.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->long a = 0;
-long b = 0;
-long c = 0;</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Instead of:</I
-></SPAN
-></P
-><P
->long a, b, c;</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-> - there is more room for comments on the
-    individual variables - easier to add new variables without
-    messing up the original ones - when searching on a variable to
-    find its type, there is less clutter to "visually"
-    eliminate</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Exceptions:</I
-></SPAN
-> when you want to declare a bunch of loop
-    variables or other trivial variables; feel free to declare them
-    on one line. You should, although, provide a good comment on
-    their functions.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> developer-discretion.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S42"
->4.7.7. Use malloc/zalloc sparingly</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->Create a local struct (on the stack) if the variable will
-    live and die within the context of one function call.</P
-><P
->Only "malloc" a struct (on the heap) if the variable's life
-    will extend beyond the context of one function call.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->If a function creates a struct and stores a pointer to it in a
-list, then it should definitely be allocated via `malloc'.</PRE
-></TD
-></TR
-></TABLE
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S43"
->4.7.8. The Programmer Who Uses 'malloc' is
-    Responsible for Ensuring 'free'</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->If you have to "malloc" an instance, you are responsible for
-    insuring that the instance is `free'd, even if the deallocation
-    event falls within some other programmer's code. You are also
-    responsible for ensuring that deletion is timely (i.e. not too
-    soon, not too late). This is known as "low-coupling" and is a
-    "good thing (tm)". You may need to offer a
-    free/unload/destructor type function to accommodate this.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->int load_re_filterfile( struct client_state *csp ) { ... }
-static void unload_re_filterfile( void *f ) { ... }</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Exceptions:</I
-></SPAN
-></P
-><P
->The developer cannot be expected to provide `free'ing
-    functions for C run-time library functions ... such as
-    `strdup'.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Status:</I
-></SPAN
-> developer-discretion. The "main" use of this
-    standard is for allocating and freeing data structures (complex
-    or nested).</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S44"
->4.7.9. Add loaders to the `file_list' structure
-    and in order</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->I have ordered all of the "blocker" file code to be in alpha
-    order. It is easier to add/read new blockers when you expect a
-    certain order.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> It may appear that the alpha order is broken in
-    places by POPUP tests coming before PCRS tests. But since
-    POPUPs can also be referred to as KILLPOPUPs, it is clear that
-    it should come first.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="S45"
->4.7.10. "Uncertain" new code and/or changes to
-    existing code, use FIXME or XXX</A
-></H3
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Explanation:</I
-></SPAN
-></P
-><P
->If you have enough confidence in new code or confidence in
-    your changes, but are not *quite* sure of the repercussions,
-    add this:</P
-><P
->/* FIXME: this code has a logic error on platform XYZ, *
-    attempting to fix */ #ifdef PLATFORM ...changed code here...
-    #endif</P
-><P
->or:</P
-><P
->/* FIXME: I think the original author really meant this...
-    */ ...changed code here...</P
-><P
->or:</P
-><P
->/* FIXME: new code that *may* break something else... */
-    ...new code here...</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> If you make it clear that this may or may not
-    be a "good thing (tm)", it will be easier to identify and
-    include in the project (or conversely exclude from the
-    project).</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="S46"
->4.8. Addendum: Template for files and function
-    comment blocks:</A
-></H2
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example for file comments:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->const char FILENAME_rcs[] = "$Id: coding.html,v 1.42 2009/03/21 12:59:32 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/doc/webserver/developer-manual/coding.html,v $
- *
- * Purpose     :  (Fill me in with a good description!)
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009
- *                the Privoxy team. http://www.privoxy.org/
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 ,
- *                USA
- *
- * Revisions   :
- *    $Log: coding.html,v $
- *    Revision 1.42  2009/03/21 12:59:32  fabiankeil
- *    Rebuild with recent changes.
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-   ...necessary include files for us to do our work...
-
-const char FILENAME_h_rcs[] = FILENAME_H_VERSION;</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> This declares the rcs variables that should be
-    added to the "show-proxy-args" page. If this is a brand new
-    creation by you, you are free to change the "Copyright" section
-    to represent the rights you wish to maintain.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> The formfeed character that is present right
-    after the comment flower box is handy for (X|GNU)Emacs users to
-    skip the verbiage and get to the heart of the code (via
-    `forward-page' and `backward-page'). Please include it if you
-    can.</P
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example for file header comments:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->#ifndef _FILENAME_H
-#define _FILENAME_H
-#define FILENAME_H_VERSION "$Id: coding.html,v 1.42 2009/03/21 12:59:32 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/doc/webserver/developer-manual/coding.html,v $
- *
- * Purpose     :  (Fill me in with a good description!)
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009
- *                the Privoxy team. http://www.privoxy.org/
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
- *                or write to the Free Software Foundation, Inc., 
- *                51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 ,
- *                USA
- *
- * Revisions   :
- *    $Log: coding.html,v $
- *    Revision 1.42  2009/03/21 12:59:32  fabiankeil
- *    Rebuild with recent changes.
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-   ... function headers here ...
-
-
-/* Revision control strings from this header and associated .c file */
-extern const char FILENAME_rcs[];
-extern const char FILENAME_h_rcs[];
-
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef _FILENAME_H */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Example for function comments:</I
-></SPAN
-></P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->/*********************************************************************
- *
- * Function    :  FUNCTION_NAME
- *
- * Description :  (Fill me in with a good description!)
- *
- * parameters  :
- *          1  :  param1 = pointer to an important thing
- *          2  :  x      = pointer to something else
- *
- * Returns     :  0 =&#62; Ok, everything else is an error.
- *
- *********************************************************************/
-int FUNCTION_NAME( void *param1, const char *x )
-{
-   ...
-   return( 0 );
-
-}</PRE
-></TD
-></TR
-></TABLE
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Note:</I
-></SPAN
-> If we all follow this practice, we should be
-    able to parse our code to create a "self-documenting" web
-    page.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="documentation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="testing.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Documentation Guidelines</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Testing Guidelines</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/contact.html b/external/privoxy/doc/webserver/developer-manual/contact.html
deleted file mode 100644
index 3d8ddc0..0000000
--- a/external/privoxy/doc/webserver/developer-manual/contact.html
+++ /dev/null
@@ -1,510 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Contacting the developers, Bug Reporting and Feature Requests</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Update the Webserver"
-HREF="webserver-update.html"><LINK
-REL="NEXT"
-TITLE="Privoxy Copyright, License and History"
-HREF="copyright.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="webserver-update.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CONTACT"
->8. Contacting the developers, Bug Reporting and Feature Requests</A
-></H1
-><P
-> We value your feedback. In fact, we rely on it to improve
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and its configuration.
- However, please note the following hints, so we can 
- provide you with the best support:</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-SUPPORT"
->8.1. Get Support</A
-></H2
-><P
-> For casual users, our 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";
-TARGET="_top"
->support forum at SourceForge</A
->
- is probably best suited:
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";
-TARGET="_top"
->http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118</A
-></P
-><P
-> All users are of course welcome to discuss their issues on the <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-users";
-TARGET="_top"
->users
- mailing list</A
->, where the developers also hang around.</P
-><P
-> Please don't sent private support requests to individual Privoxy
- developers, either use the mailing lists or the support trackers.</P
-><P
-> Note that the Privoxy mailing lists are moderated. Posts from unsubscribed
- addresses have to be accepted manually by a moderator. This may cause a
- delay of several days and if you use a subject that doesn't clearly
- mention Privoxy or one of its features, your message may be accidentally
- discarded as spam.</P
-><P
-> If you aren't subscribed, you should therefore spend a few seconds
- to come up with a proper subject. Additionally you should make it clear
- that you want to get CC'd. Otherwise some responses will be directed to
- the mailing list only, and you won't see them.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="REPORTING"
->8.2. Reporting Problems</A
-></H2
-><P
-><SPAN
-CLASS="QUOTE"
->"Problems"</SPAN
-> for our purposes, come in two forms:</P
-><P
-></P
-><UL
-><LI
-><P
->    Configuration issues, such as ads that slip through, or sites that 
-    don't function properly due to one <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
-    <SPAN
-CLASS="QUOTE"
->"action"</SPAN
-> or another being turned <SPAN
-CLASS="QUOTE"
->"on"</SPAN
->.
-   </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="QUOTE"
->"Bugs"</SPAN
-> in the programming code that makes up 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, such as that might cause a crash.
-   </P
-></LI
-></UL
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="CONTACT-ADS"
->8.2.1. Reporting Ads or Other Configuration Problems</A
-></H3
-><P
-> Please send feedback on ads that slipped through, innocent images that were
- blocked, sites that don't work properly, and other configuration related problem of 
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file, to 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=460288";
-TARGET="_top"
-> http://sourceforge.net/tracker/?group_id=11118&#38;atid=460288</A
->,
- the Actions File Tracker.</P
-><P
-> New, improved <TT
-CLASS="FILENAME"
->default.action</TT
-> files may occasionally be made
- available based on your feedback. These will be announced on the <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce";
-TARGET="_top"
->ijbswa-announce</A
->
- list and available from our the <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->files section</A
-> of
- our <A
-HREF="http://sf.net/projects/ijbswa/";
-TARGET="_top"
->project page</A
->.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="CONTACT-BUGS"
->8.2.2. Reporting Bugs</A
-></H3
-><P
-> Please report all bugs through our bug tracker: 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=111118";
-TARGET="_top"
->http://sourceforge.net/tracker/?group_id=11118&#38;atid=111118</A
->. </P
-><P
->  Before doing so, please make sure that the bug has <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not already been submitted</I
-></SPAN
->
-  and observe the additional hints at the top of the <A
-HREF="http://sourceforge.net/tracker/?func=add&#38;group_id=11118&#38;atid=111118";
-TARGET="_top"
->submit
-  form</A
->. If already submitted, please feel free to add any info to the 
-  original report that might help to solve the issue.</P
-><P
->  Please try to verify that it is a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> bug,
-  and not a browser or site bug or documented behaviour that just happens
-  to be different than what you expected. If unsure,
-  try <A
-HREF="http://config.privoxy.org/toggle?set=disable";
-TARGET="_top"
->toggling
-  off</A
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and see if the problem persists.</P
-><P
->  If you are using your own custom configuration, please try
-  the stock configs to see if the problem is configuration related.
-  If you're having problems with a feature that is disabled by default,
-  please ask around on the mailing list if others can reproduce the problem.</P
-><P
->  If you aren't using the latest Privoxy version, the bug may have been found
-  and fixed in the meantime. We would appreciate if you could take the time
-  to <A
-HREF="http://www.privoxy.org/user-manual/installation.html";
-TARGET="_top"
->upgrade
-  to the latest version</A
-> (or  even the latest CVS snapshot) and verify
-  that your bug still exists.</P
-><P
->Please be sure to provide the following information:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    The exact <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version you are using
-    (if you got the source from CVS, please also provide the source code revisions
-     as shown in <A
-HREF="http://config.privoxy.org/show-version";
-TARGET="_top"
->http://config.privoxy.org/show-version</A
->).
-   </P
-></LI
-><LI
-><P
->    The operating system and versions you run
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on, (e.g. <SPAN
-CLASS="APPLICATION"
->Windows
-    XP SP2</SPAN
->), if you are using a Unix flavor,
-    sending the output of <SPAN
-CLASS="QUOTE"
->"uname -a"</SPAN
-> should do,
-    in case of GNU/Linux, please also name the distribution.
-   </P
-></LI
-><LI
-><P
->    The name, platform, and version of the <SPAN
-CLASS="APPLICATION"
->browser</SPAN
-> 
-    you were using (e.g. <SPAN
-CLASS="APPLICATION"
->Internet Explorer v5.5</SPAN
-> for Mac).
-   </P
-></LI
-><LI
-><P
->    The URL where the problem occurred, or some way for us to duplicate the
-    problem (e.g. <TT
-CLASS="LITERAL"
->http://somesite.example.com/?somethingelse=123</TT
->). 
-   </P
-></LI
-><LI
-><P
->    Whether your version of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is one supplied
-    by the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developers via SourceForge,
-    or if you got your copy somewhere else.
-   </P
-></LI
-><LI
-><P
->    Whether you are using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in tandem with 
-    another proxy such as <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->. If so, please
-    temporary disable the other proxy to see if the symptoms change.
-   </P
-></LI
-><LI
-><P
->    Whether you are using a personal firewall product. If so, does 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> work without it?
-   </P
-></LI
-><LI
-><P
->    Any other pertinent information to help identify the problem such as config
-    or log file excerpts (yes, you should have log file entries for each
-    action taken).
-   </P
-></LI
-></UL
-></P
-><P
-> You don't have to tell us your actual name when filing a problem
- report, but please use a nickname so we can differentiate between
- your messages and the ones entered by other "anonymous" users that
- may respond to your request if they have the same problem or already
- found a solution.</P
-><P
-> Please also check the status of your request a few days after submitting
- it, as we may request additional information. If you use a SF id,
- you should automatically get a mail when someone responds to your request.</P
-><P
->  The <A
-HREF="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT";
-TARGET="_top"
->appendix
-  of the Privoxy User Manual</A
-> also has helpful information 
-  on understanding <TT
-CLASS="LITERAL"
->actions</TT
->, and <TT
-CLASS="LITERAL"
->action</TT
-> debugging. </P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-FEATURE"
->8.3. Request New Features</A
-></H2
-><P
-> You are welcome to submit ideas on new features or other proposals
- for improvement through our feature request tracker at
- <A
-HREF="http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118";
-TARGET="_top"
->http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-OTHER"
->8.4. Other</A
-></H2
-><P
->For any other issues, feel free to use the mailing lists. Technically interested users
-and people who wish to contribute to the project are also welcome on the developers list!
-You can find an overview of all <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->-related mailing lists,
-including list archives, at:
-<A
-HREF="http://sourceforge.net/mail/?group_id=11118";
-TARGET="_top"
->http://sourceforge.net/mail/?group_id=11118</A
->.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="webserver-update.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Update the Webserver</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Privoxy Copyright, License and History</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/copyright.html b/external/privoxy/doc/webserver/developer-manual/copyright.html
deleted file mode 100644
index 5fbe9a4..0000000
--- a/external/privoxy/doc/webserver/developer-manual/copyright.html
+++ /dev/null
@@ -1,298 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy Copyright, License and History</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Contacting the developers, Bug Reporting and Feature Requests"
-HREF="contact.html"><LINK
-REL="NEXT"
-TITLE="See also"
-HREF="seealso.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="contact.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="seealso.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="COPYRIGHT"
->9. Privoxy Copyright, License and History</A
-></H1
-><P
-> Copyright © 2001-2009 by Privoxy Developers <CODE
-CLASS="EMAIL"
->&#60;<A
-HREF="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";
->ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</A
->&#62;</CODE
-></P
-><P
-> Some source code is based on code Copyright © 1997 by Anonymous Coders
- and Junkbusters, Inc. and licensed under the <I
-CLASS="CITETITLE"
->GNU General Public
- License</I
->.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN1223"
->9.1. License</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is free software; you can
- redistribute it and/or modify it under the terms of the 
- <I
-CLASS="CITETITLE"
->GNU General Public License</I
->, version 2,
- as published by the Free Software Foundation.</P
-><P
-> This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
-> <I
-CLASS="CITETITLE"
->GNU General Public License</I
-></A
-> for details.</P
-><P
-> You should have received a copy of the <I
-CLASS="CITETITLE"
->GNU GPL</I
->
- along with this program; if not, write to the <P
-CLASS="ADDRESS"
->&nbsp;Free&nbsp;Software<br>
-&nbsp;Foundation,&nbsp;Inc.&nbsp;<SPAN
-CLASS="STREET"
->51 Franklin Street, Fifth Floor</SPAN
-><br>
-&nbsp;<SPAN
-CLASS="CITY"
->Boston</SPAN
->,&nbsp;<SPAN
-CLASS="STATE"
->MA</SPAN
->&nbsp;<SPAN
-CLASS="POSTCODE"
->02110-1301</SPAN
-><br>
-&nbsp;<SPAN
-CLASS="COUNTRY"
->USA</SPAN
->&nbsp;</P
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN1239"
->9.2. History</A
-></H2
-><P
-> A long time ago, there was the
- <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
-><SPAN
-CLASS="APPLICATION"
->Internet Junkbuster</SPAN
-></A
->, 
- by Anonymous Coders and <A
-HREF="http://www.junkbusters.com/";
-TARGET="_top"
->Junkbusters
- Corporation</A
->. This saved many users a lot of pain in the early days of
- web advertising and user tracking.</P
-><P
-> But the web, its protocols and standards, and with it, the techniques for
- forcing ads on users, give up autonomy over their browsing, and
- for tracking them, keeps evolving. Unfortunately, the <SPAN
-CLASS="APPLICATION"
->Internet
- Junkbuster</SPAN
-> did not. Version 2.0.2, published in 1998, was 
- (and is) the last official
- <A
-HREF="http://www.junkbusters.com/ijbdist.html#release";
-TARGET="_top"
->release</A
->
- available from <A
-HREF="http://www.junkbusters.com";
-TARGET="_top"
->Junkbusters Corporation</A
->.
- Fortunately, it had been released under the GNU
- <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
->GPL</A
->,
- which allowed further development by others.</P
-><P
-> So Stefan Waldherr started maintaining an improved version of the
- software, to which eventually a number of people contributed patches.
- It could already replace banners with a transparent image, and had a first
- version of pop-up killing, but it was still very closely based on the
- original, with all its limitations, such as the lack of HTTP/1.1 support,
- flexible per-site configuration, or content modification. The last release
- from this effort was version 2.0.2-10, published in 2000.</P
-><P
-> Then, some
- <A
-HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS";
-TARGET="_top"
->developers</A
->
- picked up the thread, and started turning the software inside out, upside down,
- and then reassembled it, adding many
- <A
-HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES";
-TARGET="_top"
->new
- features</A
-> along the way.</P
-><P
-> The result of this is <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, whose first
- stable version, 3.0, was released August, 2002. 
- </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="contact.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="seealso.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Contacting the developers, Bug Reporting and Feature Requests</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->See also</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/cvs.html b/external/privoxy/doc/webserver/developer-manual/cvs.html
deleted file mode 100644
index db1fb9e..0000000
--- a/external/privoxy/doc/webserver/developer-manual/cvs.html
+++ /dev/null
@@ -1,330 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->The CVS Repository</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Introduction"
-HREF="introduction.html"><LINK
-REL="NEXT"
-TITLE="Documentation Guidelines"
-HREF="documentation.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="introduction.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="documentation.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CVS"
->2. The CVS Repository</A
-></H1
-><P
->      If you become part of the active development team, you will eventually
-      need write access to our holy grail, the CVS repository. One of the 
-      team members will need to set this up for you. Please read
-      this chapter completely before accessing via CVS.
-    </P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CVSACCESS"
->2.1. Access to CVS</A
-></H2
-><P
->        The project's CVS repository is hosted on
-        <A
-HREF="http://sourceforge.net/";
-TARGET="_top"
->SourceForge.</A
->
-        Please refer to the chapters 6 and 7 in
-        <A
-HREF="http://sourceforge.net/docman/?group_id=1";
-TARGET="_top"
->SF's site
-        documentation</A
-> for the technical access details for your
-        operating system. For historical reasons, the CVS server is
-        called <TT
-CLASS="LITERAL"
->ijbswa.cvs.sourceforge.net</TT
->, the repository is
-        called <TT
-CLASS="LITERAL"
->ijbswa</TT
->, and the source tree module is called
-        <TT
-CLASS="LITERAL"
->current</TT
->.
-      </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CVSBRANCHES"
->2.2. Branches</A
-></H2
-><P
->       Within the CVS repository, there are modules and branches. As
-       mentioned, the sources are in the <TT
-CLASS="LITERAL"
->current</TT
->
-       <SPAN
-CLASS="QUOTE"
->"module"</SPAN
->. Other modules are present for platform specific
-       issues. There is a webview of the CVS hierarchy at <A
-HREF="http://ijbswa.cvs.sourceforge.net/ijbswa/";
-TARGET="_top"
->http://ijbswa.cvs.sourceforge.net/ijbswa/</A
->,
-       which might help with visualizing how these pieces fit together.
-     </P
-><P
->       Branches are used to fork a sub-development path from the main trunk.
-       Within the <TT
-CLASS="LITERAL"
->current</TT
-> module where the sources are, there
-       is always at least one <SPAN
-CLASS="QUOTE"
->"branch"</SPAN
-> from the main trunk
-       devoted to a stable release series. The main trunk is where active
-       development takes place for the next stable series (e.g. 3.2.x).
-       So just prior to each stable series (e.g. 3.0.x), a branch is created
-       just for stable series releases (e.g. 3.0.0 -&#62; 3.0.1 -&#62; 3.0.2, etc).
-       Once the initial stable release of any stable branch has taken place,
-       this branch is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->only used for bugfixes</I
-></SPAN
->, which have
-       had prior testing before being committed to CVS. (See <A
-HREF="newrelease.html#VERSIONNUMBERS"
->Version Numbers</A
-> below for details on
-       versioning.)
-     </P
-><P
->      At one time there were two distinct branches: stable and unstable. The
-      more drastic changes were to be in the unstable branch. These branches 
-      have now been merged to minimize time and effort of maintaining two 
-      branches.
-     </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CVSCOMMIT"
->2.3. CVS Commit Guidelines</A
-></H2
-><P
->        The source tree is the heart of every software project. Every effort must
-        be made to ensure that it is readable, compilable and consistent at all
-        times. There are differing guidelines for the stable branch and the
-        main development trunk, and we ask anyone with CVS access to strictly
-        adhere to the following guidelines:
-      </P
-><P
->       Basic Guidelines, for all branches:
-      </P
-><P
->        <P
-></P
-><UL
-><LI
-><P
->            Please don't commit even 
-            a small change without testing it thoroughly first. When we're
-            close to a public release, ask a fellow developer to review your 
-            changes.
-          </P
-></LI
-><LI
-><P
->            Your commit message should give a concise overview of <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->what you
-            changed</I
-></SPAN
-> (no big details) and <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->why you changed it</I
-></SPAN
->
-            Just check previous messages for good examples.
-          </P
-></LI
-><LI
-><P
->            Don't use the same message on multiple files, unless it equally applies to
-            all those files.
-          </P
-></LI
-><LI
-><P
->            If your changes span multiple files, and the code won't recompile unless
-            all changes are committed (e.g. when changing the signature of a function),
-            then commit all files one after another, without long delays in between.
-            If necessary, prepare the commit messages in advance.
-          </P
-></LI
-><LI
-><P
->            Before changing things on CVS, make sure that your changes are in line
-            with the team's general consensus on what should be done.
-          </P
-></LI
-><LI
-><P
->            Note that near a major public release, we get more cautious.
-            There is always the possibility to submit a patch to the <A
-HREF="http://sourceforge.net/tracker/?atid=311118&#38;group_id=11118&#38;func=browse";
-TARGET="_top"
->patch
-            tracker</A
-> instead.
-          </P
-></LI
-></UL
->
-      </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="introduction.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="documentation.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Introduction</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Documentation Guidelines</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/documentation.html b/external/privoxy/doc/webserver/developer-manual/documentation.html
deleted file mode 100644
index d547c23..0000000
--- a/external/privoxy/doc/webserver/developer-manual/documentation.html
+++ /dev/null
@@ -1,944 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Documentation Guidelines</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="The CVS Repository"
-HREF="cvs.html"><LINK
-REL="NEXT"
-TITLE="Coding Guidelines"
-HREF="coding.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="cvs.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="coding.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="DOCUMENTATION"
->3. Documentation Guidelines</A
-></H1
-><P
->    All formal documents are maintained in Docbook SGML and located in the
-    <SAMP
-CLASS="COMPUTEROUTPUT"
->doc/source/*</SAMP
-> directory. You will need
-    <A
-HREF="http://www.docbook.org";
-TARGET="_top"
->Docbook</A
->, the Docbook 
-    DTD's and the Docbook modular stylesheets (or comparable alternatives),
-    and either <SPAN
-CLASS="APPLICATION"
->jade</SPAN
-> or
-    <SPAN
-CLASS="APPLICATION"
->openjade</SPAN
-> (recommended) installed in order to
-    build docs from source. Currently there is <A
-HREF="../user-manual/index.html"
-TARGET="_top"
-><I
-CLASS="CITETITLE"
->user-manual</I
-></A
->,
-    <A
-HREF="../faq/index.html"
-TARGET="_top"
-><I
-CLASS="CITETITLE"
->FAQ</I
-></A
->, and, of
-    course this, the <I
-CLASS="CITETITLE"
->developer-manual</I
-> in this format.
-    The <I
-CLASS="CITETITLE"
->README</I
->, <I
-CLASS="CITETITLE"
->AUTHORS</I
->,
-    <I
-CLASS="CITETITLE"
->INSTALL</I
->,
-    <I
-CLASS="CITETITLE"
->privoxy.1</I
-> (man page), and
-    <I
-CLASS="CITETITLE"
->config</I
-> files are also now maintained as Docbook
-    SGML. These files, when built, in the top-level source directory are
-    generated files! Also, the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> <TT
-CLASS="FILENAME"
->index.html</TT
-> (and a 
-    variation on this file, <TT
-CLASS="FILENAME"
->privoxy-index.html</TT
->, 
-    meant for inclusion with doc packages), are maintained as SGML as well.
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->DO NOT edit these directly</I
-></SPAN
->. Edit the SGML source, or
-    contact someone involved in the documentation.
-    </P
-><P
->     <TT
-CLASS="FILENAME"
->config</TT
-> requires some special handling. The reason it
-     is maintained this way is so that the extensive comments in the file
-     mirror those in <I
-CLASS="CITETITLE"
->user-manual</I
->. But the conversion 
-     process requires going from SGML to HTML to text to special formatting 
-     required for the embedded comments. Some of this does not survive so
-     well. Especially some of the examples that are longer than 80 characters.
-     The build process for this file outputs to <TT
-CLASS="FILENAME"
->config.new</TT
->, 
-     which should be reviewed for errors and mis-formatting. Once satisfied
-     that it is correct, then it should be hand copied to
-     <TT
-CLASS="FILENAME"
->config</TT
->.
-    </P
-><P
->     Other, less formal documents (e.g. <TT
-CLASS="FILENAME"
->LICENSE</TT
->) are
-     maintained as plain text files in the top-level source directory.
-    </P
-><P
->     Packagers are encouraged to include this documentation. For those without
-     the ability to build the docs locally, text versions of each are kept in
-     CVS. HTML versions are also being kept in CVS under 
-     <TT
-CLASS="FILENAME"
->doc/webserver/*</TT
->. And PDF version are kept in 
-     <TT
-CLASS="FILENAME"
->doc/pdf/*</TT
->.
-    </P
-><P
->     Formal documents are built with the Makefile targets of
-     <SAMP
-CLASS="COMPUTEROUTPUT"
->make dok</SAMP
->, or alternately
-     <SAMP
-CLASS="COMPUTEROUTPUT"
->make redhat-dok</SAMP
->. If you have problems,
-     try both. The build process uses the document SGML sources in
-     <SAMP
-CLASS="COMPUTEROUTPUT"
->doc/source/*/*</SAMP
-> to update all text files in
-     <SAMP
-CLASS="COMPUTEROUTPUT"
->doc/text/</SAMP
-> and to update all HTML
-     documents in <SAMP
-CLASS="COMPUTEROUTPUT"
->doc/webserver/</SAMP
->.
-    </P
-><P
->     Documentation writers should please make sure documents build
-     successfully before committing to CVS, if possible.
-    </P
-><P
->     How do you update the webserver (i.e. the pages on privoxy.org)?
-     
-     <P
-></P
-><OL
-TYPE="1"
-><LI
-><P
->        First, build the docs by running <SAMP
-CLASS="COMPUTEROUTPUT"
->make
-        dok</SAMP
-> (or alternately <SAMP
-CLASS="COMPUTEROUTPUT"
->make
-        redhat-dok</SAMP
->). For PDF docs, do <SAMP
-CLASS="COMPUTEROUTPUT"
->make
-        dok-pdf</SAMP
->.
-      </P
-></LI
-><LI
-><P
->        Run <SAMP
-CLASS="COMPUTEROUTPUT"
->make webserver</SAMP
-> which copies all
-        files from <SAMP
-CLASS="COMPUTEROUTPUT"
->doc/webserver</SAMP
-> to the
-        sourceforge webserver via scp.
-      </P
-></LI
-></OL
->
-  </P
-><P
->   Finished docs should be occasionally submitted to CVS
-   (<TT
-CLASS="FILENAME"
->doc/webserver/*/*.html</TT
->) so that those without 
-   the ability to build them locally, have access to them if needed.
-   This is especially important just prior to a new release! Please
-   do this <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->after</I
-></SPAN
-> the <TT
-CLASS="LITERAL"
->$VERSION</TT
-> and
-   other release specific data in <TT
-CLASS="FILENAME"
->configure.in</TT
-> has been
-   updated (this is done just prior to a new release).
-  </P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="SGML"
->3.1. Quickstart to Docbook and SGML</A
-></H2
-><P
-> If you are not familiar with SGML, it is a markup language similar to HTML. 
- Actually, not a mark up language per se, but a language used to define 
- markup languages. In fact, HTML is an SGML application. Both will use
- <SPAN
-CLASS="QUOTE"
->"tags"</SPAN
-> to format text and other content. SGML tags can be much
- more varied, and flexible, but do much of the same kinds of things. The tags,
- or <SPAN
-CLASS="QUOTE"
->"elements"</SPAN
->, are definable in SGML. There is no set
- <SPAN
-CLASS="QUOTE"
->"standards"</SPAN
->. Since we are using
- <SPAN
-CLASS="APPLICATION"
->Docbook</SPAN
->, our tags are those that are defined by 
- <SPAN
-CLASS="APPLICATION"
->Docbook</SPAN
->. Much of how the finish document is
- rendered is determined by the <SPAN
-CLASS="QUOTE"
->"stylesheets"</SPAN
->.
- The stylesheets determine how each tag gets translated to HTML, or other
- formats.</P
-><P
-> Tags in Docbook SGML need to be always <SPAN
-CLASS="QUOTE"
->"closed"</SPAN
->. If not, you
- will likely generate errors. Example: <TT
-CLASS="LITERAL"
->&#60;title&#62;My
- Title&#60;/title&#62;</TT
->. They are also case-insensitive, but we
- strongly suggest using all lower case. This keeps compatibility with
- [Docbook] <SPAN
-CLASS="APPLICATION"
->XML</SPAN
->.</P
-><P
-> Our documents use <SPAN
-CLASS="QUOTE"
->"sections"</SPAN
-> for the most part. Sections
- will be processed into HTML headers (e.g. <TT
-CLASS="LITERAL"
->h1</TT
-> for 
- <TT
-CLASS="LITERAL"
->sect1</TT
->). The <SPAN
-CLASS="APPLICATION"
->Docbook</SPAN
-> stylesheets
- will use these to also generate the Table of Contents for each doc. Our 
- TOC's are set to a depth of three. Meaning <TT
-CLASS="LITERAL"
->sect1</TT
->, 
- <TT
-CLASS="LITERAL"
->sect2</TT
->, and <TT
-CLASS="LITERAL"
->sect3</TT
-> will have TOC 
- entries, but <TT
-CLASS="LITERAL"
->sect4</TT
-> will not. Each section requires 
- a <TT
-CLASS="LITERAL"
->&#60;title&#62;</TT
-> element, and at least one 
- <TT
-CLASS="LITERAL"
->&#60;para&#62;</TT
->. There is a limit of five section 
- levels in Docbook, but generally three should be sufficient for our 
- purposes.</P
-><P
-> Some common elements that you likely will use: </P
-><P
->  <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;para&#62;&#60;/para&#62;</I
-></SPAN
->, paragraph delimiter. Most 
-      text needs to be within paragraph elements (there are some exceptions).
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;emphasis&#62;&#60;/emphasis&#62;</I
-></SPAN
->, the stylesheets
-      make this italics.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;filename&#62;&#60;/filename&#62;</I
-></SPAN
->, files and directories.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;command&#62;&#60;/command&#62;</I
-></SPAN
->, command examples.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;literallayout&#62;&#60;/literallayout&#62;</I
-></SPAN
->, like 
-      <TT
-CLASS="LITERAL"
->&#60;pre&#62;</TT
->, more or less.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;itemizedlist&#62;&#60;/itemizedlist&#62;</I
-></SPAN
->, list with bullets.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;listitem&#62;&#60;/listitem&#62;</I
-></SPAN
->, member of the above.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;screen&#62;&#60;/screen&#62;</I
-></SPAN
->, screen output, implies 
-      <TT
-CLASS="LITERAL"
->&#60;literallayout&#62;</TT
->.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;ulink url="example.com"&#62;&#60;/ulink&#62;</I
-></SPAN
->, like 
-      HTML <TT
-CLASS="LITERAL"
->&#60;a&#62;</TT
-> tag.
-    </TD
-></TR
-><TR
-><TD
->      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->&#60;quote&#62;&#60;/quote&#62;</I
-></SPAN
->, for, doh, quoting text. 
-    </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-> Look at any of the existing docs for examples of all these and more.</P
-><P
-> You might also find <SPAN
-CLASS="QUOTE"
->"<A
-HREF="http://opensource.bureau-cornavin.com/crash-course/index.html";
-TARGET="_top"
->Writing Documentation
- Using DocBook - A Crash Course</A
->"</SPAN
-> useful.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="DOCSTYLE"
->3.2. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Documentation Style</A
-></H2
-><P
->    It will be easier if everyone follows a similar writing style. This 
-    just makes it easier to read what someone else has written if it 
-    is all done in a similar fashion.
-   </P
-><P
->    Here it is:
-   </P
-><P
->    <P
-></P
-><UL
-><LI
-><P
->       All tags should be lower case.
-      </P
-></LI
-><LI
-><P
->       Tags delimiting a <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->block</I
-></SPAN
-> of text (even small
-       blocks) should be on their own line. Like:
-       <P
-CLASS="LITERALLAYOUT"
->&nbsp;&#60;para&#62;<br>
-&nbsp;&nbsp;Some&nbsp;text&nbsp;goes&nbsp;here.<br>
-&nbsp;&#60;/para&#62;<br>
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</P
->
-       Tags marking individual words, or few words, should be in-line:
-       <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;Just&nbsp;to&nbsp;&#60;emphasis&#62;emphasize&#60;/emphasis&#62;,&nbsp;some&nbsp;text&nbsp;goes&nbsp;here.<br>
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</P
->
-     </P
-></LI
-><LI
-><P
->      Tags should be nested and step indented for block text like: (except
-      in-line tags) 
-     <P
-CLASS="LITERALLAYOUT"
->&nbsp;&#60;para&#62;<br>
-&nbsp;&nbsp;&#60;itemizedlist&#62;<br>
-&nbsp;&nbsp;&nbsp;&#60;para&#62;<br>
-&nbsp;&nbsp;&nbsp;&nbsp;&#60;listitem&#62;<br>
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Some&nbsp;text&nbsp;goes&nbsp;here&nbsp;in&nbsp;our&nbsp;list&nbsp;example.<br>
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&#60;/listitem&#62;<br>
-&nbsp;&nbsp;&nbsp;&#60;/para&#62;<br>
-&nbsp;&nbsp;&#60;/itemizedlist&#62;<br>
-&nbsp;&#60;/para&#62;<br>
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</P
->
-      This makes it easier to find the text amongst the tags ;-)
-    </P
-></LI
-><LI
-><P
->     Use white space to separate logical divisions within a document, 
-     like between sections. Running everything together consistently 
-     makes it harder to read and work on.
-    </P
-></LI
-><LI
-><P
->     Do not hesitate to make comments. Comments can either use the 
-     &#60;comment&#62; element, or the &#60;!--  --&#62; style comment 
-     familiar from HTML. (Note in Docbook v4.x &#60;comment&#62; is 
-     replaced by &#60;remark&#62;.)
-    </P
-></LI
-><LI
-><P
->     We have an international audience. Refrain from slang, or English 
-     idiosyncrasies (too many to list :). Humor also does not translate 
-     well sometimes.
-   </P
-></LI
-><LI
-><P
->    Try to keep overall line lengths in source files to 80 characters or less
-    for obvious reasons. This is not always possible, with lengthy URLs for
-    instance.
-   </P
-></LI
-><LI
-><P
->    Our documents are available in differing formats. Right now, they 
-    are just plain text, HTML, and PDF, but others are always a 
-    future possibility. Be careful with URLs (&#60;ulink&#62;), and avoid 
-    this mistake:
-   </P
-><P
->     My favorite site is &#60;ulink url="http://example.com"&#62;here&#60;/ulink&#62;.
-   </P
-><P
->     This will render as <SPAN
-CLASS="QUOTE"
->"My favorite site is here"</SPAN
->, which is 
-     not real helpful in a text doc. Better like this:
-   </P
-><P
->     My favorite site is &#60;ulink url="http://example.com"&#62;example.com&#60;/ulink&#62;.
-   </P
-></LI
-><LI
-><P
->    All documents should be spell checked occasionally.
-    <SPAN
-CLASS="APPLICATION"
->aspell</SPAN
-> can check SGML with the
-    <TT
-CLASS="LITERAL"
->-H</TT
-> option. (<SPAN
-CLASS="APPLICATION"
->ispell</SPAN
-> I think
-    too.)
-   </P
-></LI
-></UL
->
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN217"
->3.3. Privoxy Custom Entities</A
-></H2
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> documentation is using 
-  a number of customized <SPAN
-CLASS="QUOTE"
->"entities"</SPAN
-> to facilitate 
-  documentation maintenance. 
- </P
-><P
->  We are using a set of <SPAN
-CLASS="QUOTE"
->"boilerplate"</SPAN
-> files with generic text,
-  that is used by multiple docs. This way we can write something once, and use
-  it repeatedly without having to re-write the same content over and over again.
-  If editing such a file, keep in mind that it should be
-  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->generic</I
-></SPAN
->. That is the purpose; so it can be used in varying 
-  contexts without additional modifications.
- </P
-><P
->  We are also using what <SPAN
-CLASS="APPLICATION"
->Docbook</SPAN
-> calls 
-  <SPAN
-CLASS="QUOTE"
->"internal entities"</SPAN
->. These are like variables in 
-  programming. Well, sort of. For instance, we have the
-  <TT
-CLASS="LITERAL"
->p-version</TT
-> entity that contains the current 
-  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version string. You are strongly 
-  encouraged to use these where possible. Some of these obviously 
-  require re-setting with each release (done by the Makefile). A sampling of
-  custom entities are listed below. See any of the main docs for examples.
- </P
-><P
->  <P
-></P
-><UL
-><LI
-><P
->    Re- <SPAN
-CLASS="QUOTE"
->"boilerplate"</SPAN
-> text entities are defined like:
-   </P
-><P
->    <TT
-CLASS="LITERAL"
->&#60;!entity supported SYSTEM "supported.sgml"&#62;</TT
->
-   </P
-><P
->     In this example, the contents of the file,
-     <TT
-CLASS="FILENAME"
->supported.sgml</TT
-> is available for inclusion anywhere 
-     in the doc. To make this happen, just reference the now defined 
-     entity: <TT
-CLASS="LITERAL"
->&#38;supported;</TT
-> (starts with an ampersand 
-     and ends with a semi-colon), and the contents will be dumped into 
-     the finished doc at that point.
-   </P
-></LI
-><LI
-><P
->    Commonly used <SPAN
-CLASS="QUOTE"
->"internal entities"</SPAN
->:
-  </P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->p-version</I
-></SPAN
->: the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
-    version string, e.g. <SPAN
-CLASS="QUOTE"
->"3.0.12"</SPAN
->.
-   </TD
-></TR
-><TR
-><TD
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->p-status</I
-></SPAN
->: the project status, either 
-    <SPAN
-CLASS="QUOTE"
->"alpha"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"beta"</SPAN
->, or <SPAN
-CLASS="QUOTE"
->"stable"</SPAN
->.
-   </TD
-></TR
-><TR
-><TD
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->p-not-stable</I
-></SPAN
->: use to conditionally include 
-    text in <SPAN
-CLASS="QUOTE"
->"not stable"</SPAN
-> releases (e.g. <SPAN
-CLASS="QUOTE"
->"beta"</SPAN
->).
-   </TD
-></TR
-><TR
-><TD
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->p-stable</I
-></SPAN
->: just the opposite.
-   </TD
-></TR
-><TR
-><TD
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->p-text</I
-></SPAN
->: this doc is only generated as text.
-   </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></LI
-></UL
->
- </P
-><P
->  There are others in various places that are defined for a specific 
-  purpose. Read the source!
- </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="cvs.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="coding.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The CVS Repository</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Coding Guidelines</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/index.html b/external/privoxy/doc/webserver/developer-manual/index.html
deleted file mode 100644
index 4360e6b..0000000
--- a/external/privoxy/doc/webserver/developer-manual/index.html
+++ /dev/null
@@ -1,688 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy Developer Manual</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="NEXT"
-TITLE="Introduction"
-HREF="introduction.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="ARTICLE"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="ARTICLE"
-><DIV
-CLASS="TITLEPAGE"
-><H1
-CLASS="TITLE"
-><A
-NAME="AEN2"
->Privoxy Developer Manual</A
-></H1
-><P
-CLASS="PUBDATE"
->     <SUB
->    
-    
-      <A
-HREF="copyright.html"
->Copyright</A
-> © 2001-2009 by 
-      <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->Privoxy Developers</A
->
-     </SUB
->
-    <BR></P
-><P
-CLASS="PUBDATE"
->$Id: index.html,v 1.42 2009/03/21 12:59:32 fabiankeil Exp $<BR></P
-><DIV
-><DIV
-CLASS="ABSTRACT"
-><P
-></P
-><A
-NAME="AEN9"
-></A
-><P
-> The developer manual provides guidance on coding, testing, packaging, documentation
- and other issues of importance to those involved with
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> development. It is mandatory (and helpful!) reading
- for anyone who wants to join the team. Note that it's currently out of date
- and may not be entirely correct. As always, patches are welcome.</P
-><P
-> Please note that this document is constantly evolving. This copy represents
- the state at the release of version 3.0.12.
- You can find the latest version of the this manual at <A
-HREF="http://www.privoxy.org/developer-manual/";
-TARGET="_top"
->http://www.privoxy.org/developer-manual/</A
->.
- Please see <A
-HREF="contact.html"
->the Contact section</A
-> 
- on how to contact the developers.</P
-><P
-></P
-></DIV
-></DIV
-><HR></DIV
-><DIV
-CLASS="TOC"
-><DL
-><DT
-><B
->Table of Contents</B
-></DT
-><DT
->1. <A
-HREF="introduction.html"
->Introduction</A
-></DT
-><DD
-><DL
-><DT
->1.1. <A
-HREF="introduction.html#QUICKSTART"
->Quickstart to Privoxy Development</A
-></DT
-></DL
-></DD
-><DT
->2. <A
-HREF="cvs.html"
->The CVS Repository</A
-></DT
-><DD
-><DL
-><DT
->2.1. <A
-HREF="cvs.html#CVSACCESS"
->Access to CVS</A
-></DT
-><DT
->2.2. <A
-HREF="cvs.html#CVSBRANCHES"
->Branches</A
-></DT
-><DT
->2.3. <A
-HREF="cvs.html#CVSCOMMIT"
->CVS Commit Guidelines</A
-></DT
-></DL
-></DD
-><DT
->3. <A
-HREF="documentation.html"
->Documentation Guidelines</A
-></DT
-><DD
-><DL
-><DT
->3.1. <A
-HREF="documentation.html#SGML"
->Quickstart to Docbook and SGML</A
-></DT
-><DT
->3.2. <A
-HREF="documentation.html#DOCSTYLE"
-><SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Documentation Style</A
-></DT
-><DT
->3.3. <A
-HREF="documentation.html#AEN217"
->Privoxy Custom Entities</A
-></DT
-></DL
-></DD
-><DT
->4. <A
-HREF="coding.html"
->Coding Guidelines</A
-></DT
-><DD
-><DL
-><DT
->4.1. <A
-HREF="coding.html#S1"
->Introduction</A
-></DT
-><DT
->4.2. <A
-HREF="coding.html#S2"
->Using Comments</A
-></DT
-><DD
-><DL
-><DT
->4.2.1. <A
-HREF="coding.html#S3"
->Comment, Comment, Comment</A
-></DT
-><DT
->4.2.2. <A
-HREF="coding.html#S4"
->Use blocks for comments</A
-></DT
-><DT
->4.2.3. <A
-HREF="coding.html#S5"
->Keep Comments on their own line</A
-></DT
-><DT
->4.2.4. <A
-HREF="coding.html#S6"
->Comment each logical step</A
-></DT
-><DT
->4.2.5. <A
-HREF="coding.html#S7"
->Comment All Functions Thoroughly</A
-></DT
-><DT
->4.2.6. <A
-HREF="coding.html#S8"
->Comment at the end of braces if the
-    content is more than one screen length</A
-></DT
-></DL
-></DD
-><DT
->4.3. <A
-HREF="coding.html#S9"
->Naming Conventions</A
-></DT
-><DD
-><DL
-><DT
->4.3.1. <A
-HREF="coding.html#S10"
->Variable Names</A
-></DT
-><DT
->4.3.2. <A
-HREF="coding.html#S11"
->Function Names</A
-></DT
-><DT
->4.3.3. <A
-HREF="coding.html#S12"
->Header file prototypes</A
-></DT
-><DT
->4.3.4. <A
-HREF="coding.html#S13"
->Enumerations, and #defines</A
-></DT
-><DT
->4.3.5. <A
-HREF="coding.html#S14"
->Constants</A
-></DT
-></DL
-></DD
-><DT
->4.4. <A
-HREF="coding.html#S15"
->Using Space</A
-></DT
-><DD
-><DL
-><DT
->4.4.1. <A
-HREF="coding.html#S16"
->Put braces on a line by themselves.</A
-></DT
-><DT
->4.4.2. <A
-HREF="coding.html#S17"
->ALL control statements should have a
-    block</A
-></DT
-><DT
->4.4.3. <A
-HREF="coding.html#S18"
->Do not belabor/blow-up boolean
-    expressions</A
-></DT
-><DT
->4.4.4. <A
-HREF="coding.html#S19"
->Use white space freely because it is
-    free</A
-></DT
-><DT
->4.4.5. <A
-HREF="coding.html#S20"
->Don't use white space around structure
-    operators</A
-></DT
-><DT
->4.4.6. <A
-HREF="coding.html#S21"
->Make the last brace of a function stand
-    out</A
-></DT
-><DT
->4.4.7. <A
-HREF="coding.html#S22"
->Use 3 character indentions</A
-></DT
-></DL
-></DD
-><DT
->4.5. <A
-HREF="coding.html#S23"
->Initializing</A
-></DT
-><DD
-><DL
-><DT
->4.5.1. <A
-HREF="coding.html#S24"
->Initialize all variables</A
-></DT
-></DL
-></DD
-><DT
->4.6. <A
-HREF="coding.html#S25"
->Functions</A
-></DT
-><DD
-><DL
-><DT
->4.6.1. <A
-HREF="coding.html#S26"
->Name functions that return a boolean as a
-    question.</A
-></DT
-><DT
->4.6.2. <A
-HREF="coding.html#S27"
->Always specify a return type for a
-    function.</A
-></DT
-><DT
->4.6.3. <A
-HREF="coding.html#S28"
->Minimize function calls when iterating by
-    using variables</A
-></DT
-><DT
->4.6.4. <A
-HREF="coding.html#S29"
->Pass and Return by Const Reference</A
-></DT
-><DT
->4.6.5. <A
-HREF="coding.html#S30"
->Pass and Return by Value</A
-></DT
-><DT
->4.6.6. <A
-HREF="coding.html#S31"
->Names of include files</A
-></DT
-><DT
->4.6.7. <A
-HREF="coding.html#S32"
->Provide multiple inclusion
-    protection</A
-></DT
-><DT
->4.6.8. <A
-HREF="coding.html#S33"
->Use `extern "C"` when appropriate</A
-></DT
-><DT
->4.6.9. <A
-HREF="coding.html#S34"
->Where Possible, Use Forward Struct
-    Declaration Instead of Includes</A
-></DT
-></DL
-></DD
-><DT
->4.7. <A
-HREF="coding.html#S35"
->General Coding Practices</A
-></DT
-><DD
-><DL
-><DT
->4.7.1. <A
-HREF="coding.html#S36"
->Turn on warnings</A
-></DT
-><DT
->4.7.2. <A
-HREF="coding.html#S37"
->Provide a default case for all switch
-    statements</A
-></DT
-><DT
->4.7.3. <A
-HREF="coding.html#S38"
->Try to avoid falling through cases in a
-    switch statement.</A
-></DT
-><DT
->4.7.4. <A
-HREF="coding.html#S39"
->Use 'long' or 'short' Instead of
-    'int'</A
-></DT
-><DT
->4.7.5. <A
-HREF="coding.html#S40"
->Don't mix size_t and other types</A
-></DT
-><DT
->4.7.6. <A
-HREF="coding.html#S41"
->Declare each variable and struct on its
-    own line.</A
-></DT
-><DT
->4.7.7. <A
-HREF="coding.html#S42"
->Use malloc/zalloc sparingly</A
-></DT
-><DT
->4.7.8. <A
-HREF="coding.html#S43"
->The Programmer Who Uses 'malloc' is
-    Responsible for Ensuring 'free'</A
-></DT
-><DT
->4.7.9. <A
-HREF="coding.html#S44"
->Add loaders to the `file_list' structure
-    and in order</A
-></DT
-><DT
->4.7.10. <A
-HREF="coding.html#S45"
->"Uncertain" new code and/or changes to
-    existing code, use FIXME or XXX</A
-></DT
-></DL
-></DD
-><DT
->4.8. <A
-HREF="coding.html#S46"
->Addendum: Template for files and function
-    comment blocks:</A
-></DT
-></DL
-></DD
-><DT
->5. <A
-HREF="testing.html"
->Testing Guidelines</A
-></DT
-><DD
-><DL
-><DT
->5.1. <A
-HREF="testing.html#TESTING-PLAN"
->Testplan for releases</A
-></DT
-><DT
->5.2. <A
-HREF="testing.html#TESTING-REPORT"
->Test reports</A
-></DT
-></DL
-></DD
-><DT
->6. <A
-HREF="newrelease.html"
->Releasing a New Version</A
-></DT
-><DD
-><DL
-><DT
->6.1. <A
-HREF="newrelease.html#VERSIONNUMBERS"
->Version numbers</A
-></DT
-><DT
->6.2. <A
-HREF="newrelease.html#BEFORERELEASE"
->Before the Release: Freeze</A
-></DT
-><DT
->6.3. <A
-HREF="newrelease.html#THERELEASE"
->Building and Releasing the Packages</A
-></DT
-><DD
-><DL
-><DT
->6.3.1. <A
-HREF="newrelease.html#PACK-GUIDELINES"
->Note on Privoxy Packaging</A
-></DT
-><DT
->6.3.2. <A
-HREF="newrelease.html#NEWRELEASE-TARBALL"
->Source Tarball</A
-></DT
-><DT
->6.3.3. <A
-HREF="newrelease.html#NEWRELEASE-RPM"
->SuSE, Conectiva or Red Hat RPM</A
-></DT
-><DT
->6.3.4. <A
-HREF="newrelease.html#NEWRELEASE-OS2"
->OS/2</A
-></DT
-><DT
->6.3.5. <A
-HREF="newrelease.html#NEWRELEASE-SOLARIS"
->Solaris</A
-></DT
-><DT
->6.3.6. <A
-HREF="newrelease.html#NEWRELEASE-WINDOWS"
->Windows</A
-></DT
-><DT
->6.3.7. <A
-HREF="newrelease.html#NEWRELEASE-DEBIAN"
->Debian</A
-></DT
-><DT
->6.3.8. <A
-HREF="newrelease.html#NEWRELEASE-MACOSX"
->Mac OS X</A
-></DT
-><DT
->6.3.9. <A
-HREF="newrelease.html#NEWRELEASE-FREEBSD"
->FreeBSD</A
-></DT
-><DT
->6.3.10. <A
-HREF="newrelease.html#NEWRELEASE-HPUX"
->HP-UX 11</A
-></DT
-><DT
->6.3.11. <A
-HREF="newrelease.html#NEWRELEASE-AMIGA"
->Amiga OS</A
-></DT
-><DT
->6.3.12. <A
-HREF="newrelease.html#NEWRELEASE-AIX"
->AIX</A
-></DT
-></DL
-></DD
-><DT
->6.4. <A
-HREF="newrelease.html#RELEASING"
->Uploading and Releasing Your Package</A
-></DT
-><DT
->6.5. <A
-HREF="newrelease.html#AFTERRELEASE"
->After the Release</A
-></DT
-></DL
-></DD
-><DT
->7. <A
-HREF="webserver-update.html"
->Update the Webserver</A
-></DT
-><DT
->8. <A
-HREF="contact.html"
->Contacting the developers, Bug Reporting and Feature Requests</A
-></DT
-><DD
-><DL
-><DT
->8.1. <A
-HREF="contact.html#CONTACT-SUPPORT"
->Get Support</A
-></DT
-><DT
->8.2. <A
-HREF="contact.html#REPORTING"
->Reporting Problems</A
-></DT
-><DD
-><DL
-><DT
->8.2.1. <A
-HREF="contact.html#CONTACT-ADS"
->Reporting Ads or Other Configuration Problems</A
-></DT
-><DT
->8.2.2. <A
-HREF="contact.html#CONTACT-BUGS"
->Reporting Bugs</A
-></DT
-></DL
-></DD
-><DT
->8.3. <A
-HREF="contact.html#CONTACT-FEATURE"
->Request New Features</A
-></DT
-><DT
->8.4. <A
-HREF="contact.html#CONTACT-OTHER"
->Other</A
-></DT
-></DL
-></DD
-><DT
->9. <A
-HREF="copyright.html"
->Privoxy Copyright, License and History</A
-></DT
-><DD
-><DL
-><DT
->9.1. <A
-HREF="copyright.html#AEN1223"
->License</A
-></DT
-><DT
->9.2. <A
-HREF="copyright.html#AEN1239"
->History</A
-></DT
-></DL
-></DD
-><DT
->10. <A
-HREF="seealso.html"
->See also</A
-></DT
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="introduction.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Introduction</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/introduction.html b/external/privoxy/doc/webserver/developer-manual/introduction.html
deleted file mode 100644
index 5ac1e59..0000000
--- a/external/privoxy/doc/webserver/developer-manual/introduction.html
+++ /dev/null
@@ -1,199 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Introduction</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="NEXT"
-TITLE="The CVS Repository"
-HREF="cvs.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="cvs.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="INTRODUCTION"
->1. Introduction</A
-></H1
-><P
->     <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, as an heir to
-     <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
->, is a Free Software project 
-     and the code is licensed under the GNU General Public License version 2.
-     As such, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> development is potentially open
-     to anyone who has the time, knowledge, and desire to contribute
-     in any capacity. Our goals are simply to continue the mission,
-     to improve <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and
-     to make it available to as wide an audience as possible. 
-    </P
-><P
->     One does not have to be a programmer to contribute. Packaging, testing,
-     documenting and porting, are all important jobs as well.
-    </P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="QUICKSTART"
->1.1. Quickstart to Privoxy Development</A
-></H2
-><P
->    The first step is to join the <A
-HREF="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";
-TARGET="_top"
->developer's mailing list</A
->.
-    You can submit your ideas, or even better patches. Patches are best 
-    submitted to the Sourceforge tracker set up for this purpose, but 
-    can be sent to the list for review too.
-   </P
-><P
->     You will also need to have a cvs package installed, which will 
-     entail having ssh installed as well (which seems to be a requirement of
-     SourceForge), in order to access the cvs repository. Having the GNU build
-     tools is also going to be important (particularly, autoconf and gmake).
-    </P
-><P
->      For the time being (read, this section is under construction), you can 
-      also refer to the extensive comments in the source code. In fact, 
-      reading the code is recommended in any case.
-    </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="cvs.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy Developer Manual</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->The CVS Repository</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/newrelease.html b/external/privoxy/doc/webserver/developer-manual/newrelease.html
deleted file mode 100644
index 0cdb485..0000000
--- a/external/privoxy/doc/webserver/developer-manual/newrelease.html
+++ /dev/null
@@ -1,1956 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Releasing a New Version</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Testing Guidelines"
-HREF="testing.html"><LINK
-REL="NEXT"
-TITLE="Update the Webserver"
-HREF="webserver-update.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="testing.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="webserver-update.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="NEWRELEASE"
->6. Releasing a New Version</A
-></H1
-><P
->        When we release versions of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->,
-        our work leaves our cozy secret lab and has to work in the cold
-        RealWorld[tm]. Once it is released, there is no way to call it
-        back, so it is very important that great care is taken to ensure
-        that everything runs fine, and not to introduce problems in the
-        very last minute.
-    </P
-><P
->        So when releasing a new version, please adhere exactly to the
-        procedure outlined in this chapter.
-    </P
-><P
->	The following programs are required to follow this process:
-	<TT
-CLASS="FILENAME"
->ncftpput</TT
-> (ncftp), <TT
-CLASS="FILENAME"
->scp, ssh</TT
-> (ssh),
-        <TT
-CLASS="FILENAME"
->gmake</TT
-> (GNU's version of make), autoconf, cvs.
-    </P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="VERSIONNUMBERS"
->6.1. Version numbers</A
-></H2
-><P
->      First you need to determine which version number the release will have. 
-      <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version numbers consist of three numbers,
-      separated by dots, like in X.Y.Z (e.g. 3.0.0), where:
-        <P
-></P
-><UL
-><LI
-><P
->              X, the version major, is rarely ever changed. It is increased by one if
-              turning a development branch into stable substantially changes the functionality,
-              user interface or configuration syntax. Majors 1 and 2 were 
-              <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
->, and 3 will be the first stable
-              <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> release.
-            </P
-></LI
-><LI
-><P
->              Y, the version minor, represents the branch within the major version.
-              At any point in time, there are two branches being maintained:
-              The stable branch, with an even minor, say, 2N, in which no functionality is
-              being added and only bug-fixes are made, and 2N+1, the development branch, in
-              which the further development of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> takes
-              place.
-              This enables us to turn the code upside down and inside out, while at the same time
-              providing and maintaining a stable version.
-              The minor is reset to zero (and one) when the major is incremented. When a development
-              branch has matured to the point where it can be turned into stable, the old stable branch
-              2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the
-              new stable branch 2N+2, and a new development branch 2N+3 is opened.
-            </P
-></LI
-><LI
-><P
->              Z, the point or sub version, represents a release of the software within a branch.
-              It is therefore incremented immediately before each code freeze. 
-              In development branches, only the even point versions correspond to actual releases,
-              while the odd ones denote the evolving state of the sources on CVS in between.
-              It follows that Z is odd on CVS in development branches most of the time. There, it gets
-              increased to an even number immediately before a code freeze, and is increased to an odd
-              number again immediately thereafter.
-              This ensures that builds from CVS snapshots are easily distinguished from released versions.
-              The point version is reset to zero when the minor changes.
-            </P
-><P
->              Stable branches work a little differently, since there should be
-              little to no development happening in such branches. Remember,
-              only bugfixes, which presumably should have had some testing
-              before being committed. Stable branches will then have their 
-              version reported as <TT
-CLASS="LITERAL"
->0.0.0</TT
->, during that period 
-              between releases when changes are being added. This is to denote 
-              that this code is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not for release</I
-></SPAN
->. Then 
-              as the release nears, the version is bumped according: e.g. 
-              <TT
-CLASS="LITERAL"
->3.0.1 -&#62; 0.0.0 -&#62; 3.0.2</TT
->.
-            </P
-></LI
-></UL
->
-    </P
-><P
->     In summary, the main CVS trunk is the development branch where new
-     features are being worked on for the next stable series. This should
-     almost always be where the most activity takes place. There is always at
-     least one stable branch from the trunk, e.g now it is
-     <TT
-CLASS="LITERAL"
->3.0</TT
->, which is only used to release stable versions.
-     Once the initial *.0 release of the stable branch has been done, then as a
-     rule, only bugfixes that have had prior testing should be committed to
-     the stable branch. Once there are enough bugfixes to justify a new
-     release, the version of this branch is again incremented Example: 3.0.0
-     -&#62; 3.0.1 -&#62; 3.0.2, etc are all stable releases from within the stable
-     branch. 3.1.x is currently the main trunk, and where work on 3.2.x is
-     taking place. If any questions, please post to the devel list
-     <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->before</I
-></SPAN
-> committing to a stable branch!
-    </P
-><P
->     Developers should remember too that if they commit a bugfix to the stable 
-     branch, this will more than likely require a separate submission to the 
-     main trunk, since these are separate development trees within CVS. If you 
-     are working on both, then this would require at least two separate check
-     outs (i.e main trunk, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
-> the stable release branch,
-     which is <TT
-CLASS="LITERAL"
->v_3_0_branch</TT
-> at the moment).
-    </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="BEFORERELEASE"
->6.2. Before the Release: Freeze</A
-></H2
-><P
->       The following <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->must be done by one of the
-       developers</I
-></SPAN
-> prior to each new release.
-     </P
-><P
->      <P
-></P
-><UL
-><LI
-><P
->         Make sure that everybody who has worked on the code in the last
-         couple of days has had a chance to yell <SPAN
-CLASS="QUOTE"
->"no!"</SPAN
-> in case
-         they have pending changes/fixes in their pipelines. Announce the
-         freeze so that nobody will interfere with last minute changes.
-        </P
-></LI
-><LI
-><P
->         Increment the version number (point from odd to even in development
-         branches!) in <TT
-CLASS="FILENAME"
->configure.in</TT
->. (RPM spec files 
-         will need to be incremented as well.)
-       </P
-></LI
-><LI
-><P
->        If <TT
-CLASS="FILENAME"
->default.action</TT
-> has changed since last
-        release (i.e. software release or standalone actions file release),
-        bump up its version info to A.B in this line:
-       </P
-><P
-> 
-        <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}</PRE
-></TD
-></TR
-></TABLE
->
-       </P
-><P
-> 
-        Then change the version info in doc/webserver/actions/index.php,
-        line: '$required_actions_file_version = "A.B";'
-       </P
-></LI
-><LI
-><P
->        All documentation should be rebuild after the version bump.
-        Finished docs should be then be committed to CVS (for those 
-        without the ability to build these). Some docs may require 
-        rather obscure processing tools. <TT
-CLASS="FILENAME"
->config</TT
->,
-        the man page (and the html version of the man page), and the PDF docs
-        fall in this category. REAMDE, the man page, AUTHORS, and config
-        should all also be committed to CVS for other packagers. The 
-        formal docs should be uploaded to the webserver. See the
-        Section "Updating the webserver" in this manual for details.
-       </P
-></LI
-><LI
-><P
->         The <I
-CLASS="CITETITLE"
->User Manual</I
-> is also used for context 
-         sensitive help for the CGI editor. This is version sensitive, so that
-         the user will get appropriate help for his/her release. So with 
-         each release a fresh version should be uploaded to the webserver
-         (this is in addition to the main <I
-CLASS="CITETITLE"
->User Manual</I
->
-         link from the main page since we need to keep manuals for various 
-         versions available). The CGI pages will link to something like 
-         <TT
-CLASS="LITERAL"
->http://privoxy.org/$(VERSION)/user-manual/</TT
->. This
-         will need to be updated for each new release. There is no Makefile
-         target for this at this time!!! It needs to be done manually.
-       </P
-></LI
-><LI
-><P
->        All developers should look at the <TT
-CLASS="FILENAME"
->ChangeLog</TT
-> and
-        make sure noteworthy changes are referenced.
-       </P
-></LI
-><LI
-><P
->        <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Commit all files that were changed in the above steps!</I
-></SPAN
->
-       </P
-></LI
-><LI
-><P
->        Tag all files in CVS with the version number with
-        <SPAN
-CLASS="QUOTE"
->"<B
-CLASS="COMMAND"
->cvs tag v_X_Y_Z</B
->"</SPAN
->.
-        Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc.
-       </P
-></LI
-><LI
-><P
->        If the release was in a development branch, increase the point version
-        from even to odd (X.Y.(Z+1)) again in <TT
-CLASS="FILENAME"
->configure.in</TT
-> and
-        commit your change.
-       </P
-></LI
-><LI
-><P
->        On the webserver, copy the user manual to a new top-level directory
-        called <TT
-CLASS="FILENAME"
->X.Y.Z</TT
->. This ensures that help links from the CGI
-        pages, which have the version as a prefix, will go into the right version of the manual.
-        If this is a development branch release, also symlink <TT
-CLASS="FILENAME"
->X.Y.(Z-1)</TT
->
-        to <TT
-CLASS="FILENAME"
->X.Y.Z</TT
-> and <TT
-CLASS="FILENAME"
->X.Y.(Z+1)</TT
-> to
-        <TT
-CLASS="FILENAME"
->.</TT
-> (i.e. dot). 
-       </P
-></LI
-></UL
->
-     </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="THERELEASE"
->6.3. Building and Releasing the Packages</A
-></H2
-><P
->      Now the individual packages can be built and released. Note that for
-      GPL reasons the first package to be released is always the source tarball.
-     </P
-><P
->      For <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> types of packages, including the source tarball,
-      <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->you must make sure that you build from clean sources by exporting
-      the right version from CVS into an empty directory</I
-></SPAN
-> (just press return when
-      asked for a password):
-     </P
-><P
->      <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  mkdir dist # delete or choose different name if it already exists
-  cd dist
-  cvs -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa login
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa export -r v_X_Y_Z current</PRE
-></TD
-></TR
-></TABLE
->
-    </P
-><P
->     <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Do NOT change</I
-></SPAN
-> a single bit, including, but not limited to
-     version information after export from CVS. This is to make sure that
-     all release packages, and with them, all future bug reports, are based
-     on exactly the same code.
-    </P
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="100%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->      Every significant release of Privoxy has included at least one 
-      package that either had incorrect versions of files, missing files, 
-      or incidental leftovers from a previous build process that gave 
-      unknown numbers of users headaches to try to figure out what was 
-      wrong. PLEASE, make sure you are using pristene sources, and are
-      following the prescribed process!
-     </P
-></TD
-></TR
-></TABLE
-></DIV
-><P
->     Please find additional instructions for the source tarball and the
-     individual platform dependent binary packages below. And details 
-     on the Sourceforge release process below that.
-    </P
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="PACK-GUIDELINES"
->6.3.1. Note on Privoxy Packaging</A
-></H3
-><P
->      Please keep these general guidelines in mind when putting together 
-      your package. These apply to <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> platforms!
-     </P
-><P
->      <P
-></P
-><UL
-><LI
-><P
->          <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->requires</I
-></SPAN
->
-          write access to: all <TT
-CLASS="FILENAME"
->*.action</TT
-> files, all 
-          logfiles, and the <TT
-CLASS="FILENAME"
->trust</TT
-> file. You will 
-          need to determine the best way to do this for your platform.
-        </P
-></LI
-><LI
-><P
->          Please include up to date documentation. At a bare minimum:
-        </P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          <TT
-CLASS="FILENAME"
->LICENSE</TT
-> (top-level directory)
-         </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          <TT
-CLASS="FILENAME"
->README</TT
-> (top-level directory)
-         </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          <TT
-CLASS="FILENAME"
->AUTHORS</TT
-> (top-level directory)
-         </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          <TT
-CLASS="FILENAME"
->man page</TT
-> (top-level directory, Unix-like
-          platforms only)
-         </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          <TT
-CLASS="FILENAME"
->The User Manual</TT
-> (doc/webserver/user-manual/)
-         </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          <TT
-CLASS="FILENAME"
->FAQ</TT
-> (doc/webserver/faq/)
-         </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
->          Also suggested: <TT
-CLASS="FILENAME"
->Developer Manual</TT
->
-          (doc/webserver/developer-manual) and <TT
-CLASS="FILENAME"
->ChangeLog</TT
->
-          (top-level directory). <TT
-CLASS="FILENAME"
->FAQ</TT
-> and the manuals are
-          HTML docs. There are also text versions in
-          <TT
-CLASS="FILENAME"
->doc/text/</TT
-> which could conceivably also be
-          included.
-        </P
-><P
->         The documentation has been designed such that the manuals are linked
-         to each other from parallel directories, and should be packaged 
-         that way. <TT
-CLASS="FILENAME"
->privoxy-index.html</TT
-> can also be
-         included and can serve as a focal point for docs and other links of
-         interest (and possibly renamed to <TT
-CLASS="FILENAME"
->index.html</TT
->).
-         This should be one level up from the manuals. There is a link also 
-         on this page to an HTMLized version of the man page. To avoid 404 for
-         this, it is in CVS as
-         <TT
-CLASS="FILENAME"
->doc/webserver/man-page/privoxy-man-page.html</TT
->,
-         and should be included along with the manuals. There is also a
-         css stylesheets that can be included for better presentation:
-         <TT
-CLASS="FILENAME"
->p_doc.css</TT
->. This should be in the same directory
-         with <TT
-CLASS="FILENAME"
->privoxy-index.html</TT
->, (i.e. one level up from
-         the manual directories).
-        </P
-></LI
-><LI
-><P
->        <TT
-CLASS="FILENAME"
->user.action</TT
-> and <TT
-CLASS="FILENAME"
->user.filter</TT
->
-        are designed for local preferences. Make sure these do not get overwritten!
-        <TT
-CLASS="FILENAME"
->config</TT
-> should not be overwritten either. This 
-        has especially important configuration data in it.
-        <TT
-CLASS="FILENAME"
->trust</TT
-> should be left in tact as well.
-       </P
-></LI
-><LI
-><P
->        Other configuration files (<TT
-CLASS="FILENAME"
->default.action</TT
-> and
-        <TT
-CLASS="FILENAME"
->default.filter</TT
->) should be installed as the new
-        defaults, but all previously installed configuration files should be
-        preserved as backups. This is just good manners :-) These files are
-        likely to change between releases and contain important new features
-        and bug fixes.
-       </P
-></LI
-><LI
-><P
->       Please check platform specific notes in this doc, if you haven't 
-       done <SPAN
-CLASS="QUOTE"
->"Privoxy"</SPAN
-> packaging before for other platform 
-       specific issues. Conversely, please add any notes that you know 
-       are important for your platform (or contact one of the doc 
-       maintainers to do this if you can't).
-      </P
-></LI
-><LI
-><P
->       Packagers should do a <SPAN
-CLASS="QUOTE"
->"clean"</SPAN
-> install of their 
-       package after building it. So any previous installs should be 
-       removed first to ensure the integrity of the newly built package. 
-       Then run the package for a while to make sure there are no 
-       obvious problems, before uploading.
-     </P
-></LI
-></UL
->
-     </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-TARBALL"
->6.3.2. Source Tarball</A
-></H3
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then do:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make tarball-dist</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	To upload the package to Sourceforge, simply issue
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make tarball-upload</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Go to the displayed URL and release the file publicly on Sourceforge.
-        For the change log field, use the relevant section of the
-        <TT
-CLASS="FILENAME"
->ChangeLog</TT
-> file.
-      </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-RPM"
->6.3.3. SuSE, Conectiva or Red Hat RPM</A
-></H3
-><P
->        In following text, replace <TT
-CLASS="REPLACEABLE"
-><I
->dist</I
-></TT
->
-        with either <SPAN
-CLASS="QUOTE"
->"rh"</SPAN
-> for Red Hat or <SPAN
-CLASS="QUOTE"
->"suse"</SPAN
-> for SuSE.
-        </P
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). 
-	</P
-><P
->        As the only exception to not changing anything after export from CVS,
-        now examine the file <TT
-CLASS="FILENAME"
->privoxy-</TT
-><TT
-CLASS="REPLACEABLE"
-><I
->dist</I
-></TT
-><TT
-CLASS="FILENAME"
->.spec</TT
->
-        and make sure that the version information and the RPM release number are
-        correct. The RPM release numbers for each version start at one. Hence it must
-        be reset to one if this is the first RPM for
-        <TT
-CLASS="REPLACEABLE"
-><I
->dist</I
-></TT
-> which is built from version
-        X.Y.Z. Check the
-        <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->file
-        list</A
-> if unsure. Else, it must be set to the highest already available RPM
-        release number for that version plus one.
-	</P
-><P
->        Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then do
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make <TT
-CLASS="REPLACEABLE"
-><I
->dist</I
-></TT
->-dist</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	To upload the package to Sourceforge, simply issue
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make <TT
-CLASS="REPLACEABLE"
-><I
->dist</I
-></TT
->-upload <TT
-CLASS="REPLACEABLE"
-><I
->rpm_packagerev</I
-></TT
-></PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->        where <TT
-CLASS="REPLACEABLE"
-><I
->rpm_packagerev</I
-></TT
-> is the
-        RPM release number as determined above.
-	Go to the displayed URL and release the file publicly on Sourceforge.
-        Use the release notes and change log from the source tarball package.
-      </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-OS2"
->6.3.4. OS/2</A
-></H3
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then get the OS/2 Setup module:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co os2setup</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	You will need a mix of development tools.
-	The main compilation takes place with IBM Visual Age C++.
-	Some ancillary work takes place with GNU tools, available from
-	various sources like hobbes.nmsu.edu.
-	Specificially, you will need <TT
-CLASS="FILENAME"
->autoheader</TT
->,
-	<TT
-CLASS="FILENAME"
->autoconf</TT
-> and <TT
-CLASS="FILENAME"
->sh</TT
-> tools.
-	The packaging takes place with WarpIN, available from various sources, including
-	its home page: <A
-HREF="http://www.xworkplace.org/";
-TARGET="_top"
->xworkplace</A
->.
-	</P
-><P
->	Change directory to the <TT
-CLASS="FILENAME"
->os2setup</TT
-> directory.
-	Edit the os2build.cmd file to set the final executable filename.
-	For example, 
-	</P
-><P
-> 	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  installExeName='privoxyos2_setup_X.Y.Z.exe'</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
-> 	Next, edit the <TT
-CLASS="FILENAME"
->IJB.wis</TT
-> file so the release number matches
- 	in the <TT
-CLASS="FILENAME"
->PACKAGEID</TT
-> section:
- 	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z"</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	You're now ready to build.  Run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  os2build</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->         You will find the  WarpIN-installable executable in the
-        <TT
-CLASS="FILENAME"
->./files</TT
-> directory. Upload this anonymously to
-         <TT
-CLASS="FILENAME"
->uploads.sourceforge.net/incoming</TT
->, create a release
-         for it, and you're done. Use the release notes and Change Log from the
-         source tarball package.
-	</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-SOLARIS"
->6.3.5. Solaris</A
-></H3
-><P
->	Login to Sourceforge's compilefarm via ssh:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  ssh cf.sourceforge.net</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Choose the right operating system (not the Debian one).
-        When logged in, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then run
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  gmake solaris-dist</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	which creates a gzip'ed tar archive. Sadly, you cannot use <B
-CLASS="COMMAND"
->make
-	solaris-upload</B
-> on the Sourceforge machine (no ncftpput). You now have
-	to manually upload the archive to Sourceforge's ftp server and release
-	the file publicly. Use the release notes and Change Log from the
-        source tarball package.
-	</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-WINDOWS"
->6.3.6. Windows</A
-></H3
-><P
->        You should ensure you have the latest version of Cygwin (from
-        <A
-HREF="http://www.cygwin.com/";
-TARGET="_top"
->http://www.cygwin.com/</A
->).
-        Run the following commands from within a Cygwin bash shell.
-      </P
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then get the Windows setup module:
-      </P
-><P
->      <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cvs -z3  -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co winsetup</PRE
-></TD
-></TR
-></TABLE
->
-      </P
-><P
->        Then you can build the package.  This is fully automated, and is
-        controlled by <TT
-CLASS="FILENAME"
->winsetup/GNUmakefile</TT
->.
-        All you need to do is:
-      </P
-><P
->      <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd winsetup
-  make</PRE
-></TD
-></TR
-></TABLE
->
-      </P
-><P
->        Now you can manually rename <TT
-CLASS="FILENAME"
->privoxy_setup.exe</TT
-> to
-        <TT
-CLASS="FILENAME"
->privoxy_setup_X_Y_Z.exe</TT
->, and upload it to
-        SourceForge. When releasing the package on SourceForge, use the release notes
-        and Change Log from the source tarball package.
-      </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-DEBIAN"
->6.3.7. Debian</A
-></H3
-><P
->        First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the
-        right version into an empty directory</I
-></SPAN
->. (See
-        "Building and releasing packages" above).  Then add a log
-        entry to <TT
-CLASS="FILENAME"
->debian/changelog</TT
->, if it is not
-        already there, for example by running:
-      </P
-><P
->        <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  debchange -v 3.0.12-stable-1 "New upstream version"</PRE
-></TD
-></TR
-></TABLE
->
-      </P
-><P
->        Then, run: 
-      </P
-><P
->        <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  dpkg-buildpackage -rfakeroot -us -uc -b</PRE
-></TD
-></TR
-></TABLE
->
-      </P
-><P
->        This will create
-        <TT
-CLASS="FILENAME"
->../privoxy_3.0.12-stable-1_i386.deb</TT
->
-        which can be uploaded.  To upload the package to Sourceforge, simply
-	issue
-      </P
-><P
->        <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make debian-upload</PRE
-></TD
-></TR
-></TABLE
->
-      </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-MACOSX"
->6.3.8. Mac OS X</A
-></H3
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then get the Mac OS X setup module:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co osxsetup</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd osxsetup
-  build</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	This will run <TT
-CLASS="FILENAME"
->autoheader</TT
->, <TT
-CLASS="FILENAME"
->autoconf</TT
-> and
-	<TT
-CLASS="FILENAME"
->configure</TT
-> as well as <TT
-CLASS="FILENAME"
->make</TT
->.
-	Finally, it will copy over the necessary files to the ./osxsetup/files directory
-	for further processing by <TT
-CLASS="FILENAME"
->PackageMaker</TT
->.
-	</P
-><P
->	Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package
-	name to match the release, and hit the "Create package" button.
-	If you specify ./Privoxy.pkg as the output package name, you can then create
-	the distributable zip file with the command:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	You can then upload <TT
-CLASS="FILENAME"
->privoxyosx_setup_x.y.z.zip</TT
-> anonymously to 
-	<TT
-CLASS="FILENAME"
->uploads.sourceforge.net/incoming</TT
->,
-	create a release for it, and you're done. Use the release notes
-        and Change Log from the source tarball package.
-	</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-FREEBSD"
->6.3.9. FreeBSD</A
-></H3
-><P
->	Login to Sourceforge's compile-farm via ssh:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  ssh cf.sourceforge.net</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Choose the right operating system.
-        When logged in, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  gmake freebsd-dist</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	which creates a gzip'ed tar archive. Sadly, you cannot use <B
-CLASS="COMMAND"
->make
-	freebsd-upload</B
-> on the Sourceforge machine (no ncftpput). You now have
-	to manually upload the archive to Sourceforge's ftp server and release
-	the file publicly. Use the release notes and Change Log from the
-        source tarball package.
-	</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-HPUX"
->6.3.10. HP-UX 11</A
-></H3
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then do FIXME.
-	</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-AMIGA"
->6.3.11. Amiga OS</A
-></H3
-><P
->	First, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then do FIXME.
-	</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="NEWRELEASE-AIX"
->6.3.12. AIX</A
-></H3
-><P
->	Login to Sourceforge's compilefarm via ssh:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  ssh cf.sourceforge.net</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Choose the right operating system.
-        When logged in, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->make sure that you have freshly exported the right
-        version into an empty directory</I
-></SPAN
->. (See "Building and releasing
-        packages" above). Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  cd current
-  autoheader &#38;&#38; autoconf &#38;&#38; ./configure</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	Then run:
-	</P
-><P
->	<TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make aix-dist</PRE
-></TD
-></TR
-></TABLE
->
-	</P
-><P
->	which creates a gzip'ed tar archive. Sadly, you cannot use <B
-CLASS="COMMAND"
->make
-	aix-upload</B
-> on the Sourceforge machine (no ncftpput). You now have
-	to manually upload the archive to Sourceforge's ftp server and release
-	the file publicly. Use the release notes and Change Log from the
-        source tarball package.
-	</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="RELEASING"
->6.4. Uploading and Releasing Your Package</A
-></H2
-><P
->      After the package is ready, it is time to upload it 
-      to SourceForge, and go through the release steps. The upload
-      is done via FTP:
-    </P
-><P
->      <P
-></P
-><UL
-><LI
-><P
->          Upload to: <A
-HREF="ftp://upload.sourceforge.net/incoming";
-TARGET="_top"
->ftp://upload.sourceforge.net/incoming</A
->
-        </P
-></LI
-><LI
-><P
->         user: <TT
-CLASS="LITERAL"
->anonymous</TT
->
-       </P
-></LI
-><LI
-><P
->         password: <TT
-CLASS="LITERAL"
->ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</TT
->
-       </P
-></LI
-></UL
->
-    </P
-><P
->     Or use the <B
-CLASS="COMMAND"
->make</B
-> targets as described above.
-    </P
-><P
->     Once this done go to <A
-HREF="https://sourceforge.net/project/admin/editpackages.php?group_id=11118";
-TARGET="_top"
->https://sourceforge.net/project/admin/editpackages.php?group_id=11118</A
->, 
-     making sure you are logged in. Find your target platform in the 
-     second column, and click <TT
-CLASS="LITERAL"
->Add Release</TT
->. You will 
-     then need to create a new release for your package, using the format 
-     of <TT
-CLASS="LITERAL"
->$VERSION ($CODE_STATUS)</TT
->, e.g. <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->3.0.12
-     (beta)</I
-></SPAN
->.
-    </P
-><P
->     Now just follow the prompts. Be sure to add any appropriate Release
-     notes. You should see your freshly uploaded packages in 
-     <SPAN
-CLASS="QUOTE"
->"Step 2. Add Files To This Release"</SPAN
->. Check the 
-     appropriate box(es). Remember at each step to hit the 
-     <SPAN
-CLASS="QUOTE"
->"Refresh/Submit"</SPAN
-> buttons! You should now see your 
-     file(s) listed in Step 3. Fill out the forms with the appropriate 
-     information for your platform, being sure to hit <SPAN
-CLASS="QUOTE"
->"Update"</SPAN
->
-     for each file. If anyone is monitoring your platform, check the 
-     <SPAN
-CLASS="QUOTE"
->"email"</SPAN
-> box at the very bottom to notify them of 
-     the new package. This should do it!
-    </P
-><P
->     If you have made errors, or need to make changes, you can go through 
-     essentially the same steps, but select <TT
-CLASS="LITERAL"
->Edit Release</TT
->, 
-     instead of <TT
-CLASS="LITERAL"
->Add Release</TT
->.
-    </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AFTERRELEASE"
->6.5. After the Release</A
-></H2
-><P
->      When all (or: most of the) packages have been uploaded and made available,
-      send an email to the <A
-HREF="mailto:ijbswa-announce@xxxxxxxxxxxxxxxxxxxxx";
-TARGET="_top"
->announce
-      mailing list</A
->, Subject: "Version X.Y.Z available for download". Be sure to
-      include the
-      <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->download
-      location</A
->, the release notes and the Changelog. Also, post an
-      updated News item on the project page Sourceforge, and update the Home 
-      page and docs linked from the Home page (see below). Other news sites
-      and release oriented sites, such as Freshmeat, should also be notified.
-     </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="testing.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="webserver-update.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Testing Guidelines</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Update the Webserver</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/quickstart.html b/external/privoxy/doc/webserver/developer-manual/quickstart.html
deleted file mode 100644
index ba84f13..0000000
--- a/external/privoxy/doc/webserver/developer-manual/quickstart.html
+++ /dev/null
@@ -1,150 +0,0 @@
-<HTML
-><HEAD
-><TITLE
->Quickstart to Privoxy Development</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.64
-"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Introduction"
-HREF="introduction.html"><LINK
-REL="NEXT"
-TITLE="The CVS Repository"
-HREF="cvs.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="introduction.html"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="cvs.html"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="QUICKSTART"
->3. Quickstart to Privoxy Development</A
-></H1
-><P
->      You'll need an account on <A
-HREF="http://sourceforge.net/";
-TARGET="_top"
->Sourceforge</A
-> to support our
-      development.  Mail your ID to <A
-HREF="mailto:developers@xxxxxxxxxxx";
-TARGET="_top"
->the list</A
-> and wait until a
-      project manager has added you.
-    </P
-><P
->      For the time being (read, this section is under construction), please
-      refer to the extensive comments in the source code.
-    </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="introduction.html"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="cvs.html"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Introduction</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->The CVS Repository</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/seealso.html b/external/privoxy/doc/webserver/developer-manual/seealso.html
deleted file mode 100644
index 35ee27c..0000000
--- a/external/privoxy/doc/webserver/developer-manual/seealso.html
+++ /dev/null
@@ -1,405 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->See also</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy Copyright, License and History"
-HREF="copyright.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
->&nbsp;</TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="SEEALSO"
->10. See also</A
-></H1
-><P
-> Other references and sites of interest to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- users:</P
-><P
-> <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->http://www.privoxy.org/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Home page. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/faq/";
-TARGET="_top"
->http://www.privoxy.org/faq/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> FAQ. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/developer-manual/";
-TARGET="_top"
->http://www.privoxy.org/developer-manual/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developer manual. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://sourceforge.net/projects/ijbswa/";
-TARGET="_top"
->https://sourceforge.net/projects/ijbswa/</A
->, 
-   the Project Page for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on 
-   <A
-HREF="http://sourceforge.net";
-TARGET="_top"
->SourceForge</A
->.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->,
-   the web-based user interface. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> must be
-   running for this to work. Shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://sourceforge.net/tracker/?group_id=11118&#38;atid=460288";
-TARGET="_top"
->https://sourceforge.net/tracker/?group_id=11118&#38;atid=460288</A
->, to submit <SPAN
-CLASS="QUOTE"
->"misses"</SPAN
-> and other
-   configuration related suggestions to the developers. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- 
- 
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.junkbusters.com/ht/en/cookies.html";
-TARGET="_top"
->http://www.junkbusters.com/ht/en/cookies.html</A
->,
-   an explanation how cookies are used to track web users.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
->http://www.junkbusters.com/ijb.html</A
->,
-   the original Internet Junkbuster.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.squid-cache.org/";
-TARGET="_top"
->http://www.squid-cache.org/</A
->, a popular
-   caching proxy, which is often used together with <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.pps.jussieu.fr/~jch/software/polipo/";
-TARGET="_top"
->http://www.pps.jussieu.fr/~jch/software/polipo/</A
->,
-   <SPAN
-CLASS="APPLICATION"
->Polipo</SPAN
-> is a caching proxy with advanced features
-   like pipelining, multiplexing and caching of partial instances. In many setups
-   it can be used as <SPAN
-CLASS="APPLICATION"
->Squid</SPAN
-> replacement.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://www.torproject.org/";
-TARGET="_top"
->https://www.torproject.org/</A
->, 
-   <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> can help anonymize web browsing, 
-   web publishing, instant messaging, IRC, SSH, and other applications.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->&nbsp;</TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy Copyright, License and History</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->&nbsp;</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/testing.html b/external/privoxy/doc/webserver/developer-manual/testing.html
deleted file mode 100644
index 80d3f29..0000000
--- a/external/privoxy/doc/webserver/developer-manual/testing.html
+++ /dev/null
@@ -1,259 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Testing Guidelines</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Coding Guidelines"
-HREF="coding.html"><LINK
-REL="NEXT"
-TITLE="Releasing a New Version"
-HREF="newrelease.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="coding.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="newrelease.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="TESTING"
->5. Testing Guidelines</A
-></H1
-><P
->To be filled.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="TESTING-PLAN"
->5.1. Testplan for releases</A
-></H2
-><P
->       Explain release numbers. major, minor. developer releases. etc.
-
-<P
-></P
-><OL
-TYPE="1"
-><LI
-><P
->Remove any existing rpm with rpm -e</P
-></LI
-><LI
-><P
->Remove any file that was left over. This includes (but is not limited to)
-      <P
-></P
-><UL
-><LI
-><P
->/var/log/privoxy</P
-></LI
-><LI
-><P
->/etc/privoxy</P
-></LI
-><LI
-><P
->/usr/sbin/privoxy</P
-></LI
-><LI
-><P
->/etc/init.d/privoxy</P
-></LI
-><LI
-><P
->/usr/doc/privoxy*</P
-></LI
-></UL
-></P
-></LI
-><LI
-><P
->Install the rpm. Any error messages?</P
-></LI
-><LI
-><P
->start,stop,status <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with the specific script
-      (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does
-      autostart work?</P
-></LI
-><LI
-><P
->Start browsing. Does <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> work? Logfile written?</P
-></LI
-><LI
-><P
->Remove the rpm. Any error messages? All files removed?</P
-></LI
-></OL
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="TESTING-REPORT"
->5.2. Test reports</A
-></H2
-><P
->Please submit test reports only with the <A
-HREF="http://sourceforge.net/tracker/?func=add&#38;group_id=11118&#38;atid=395005";
-TARGET="_top"
->test form</A
->
-at sourceforge. Three simple steps:
-        <P
-></P
-><UL
-><LI
-><P
->Select category: the distribution you test on.</P
-></LI
-><LI
-><P
->Select group: the version of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> that we are about to release.</P
-></LI
-><LI
-><P
->Fill the Summary and Detailed Description with something
-              intelligent (keep it short and precise).</P
-></LI
-></UL
->
-        Do not mail to the mailing list (we cannot keep track on issues there).
-      </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="coding.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="newrelease.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Coding Guidelines</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Releasing a New Version</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/developer-manual/webserver-update.html b/external/privoxy/doc/webserver/developer-manual/webserver-update.html
deleted file mode 100644
index b54d646..0000000
--- a/external/privoxy/doc/webserver/developer-manual/webserver-update.html
+++ /dev/null
@@ -1,260 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Update the Webserver</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Developer Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Releasing a New Version"
-HREF="newrelease.html"><LINK
-REL="NEXT"
-TITLE="Contacting the developers, Bug Reporting and Feature Requests"
-HREF="contact.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Developer Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="newrelease.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="contact.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="WEBSERVER-UPDATE"
->7. Update the Webserver</A
-></H1
-><P
->    The webserver should be updated at least with each stable release. When
-    updating, please follow these steps to make sure that no broken links,
-    inconsistent contents or permission problems will occur (as it has many 
-    times in the past!):
-   </P
-><P
->    If you have changed anything in the stable-branch documentation source
-    SGML files, do:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you)</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    That will generate <TT
-CLASS="FILENAME"
->doc/webserver/user-manual</TT
->,
-    <TT
-CLASS="FILENAME"
->doc/webserver/developer-manual</TT
->,
-    <TT
-CLASS="FILENAME"
->doc/webserver/faq</TT
->, 
-    <TT
-CLASS="FILENAME"
->doc/pdf/*.pdf</TT
-> and
-    <TT
-CLASS="FILENAME"
->doc/webserver/index.html</TT
-> automatically.
-   </P
-><P
->    If you changed the manual page sources, generate
-    <TT
-CLASS="FILENAME"
->doc/webserver/man-page/privoxy-man-page.html</TT
->
-    by running <SPAN
-CLASS="QUOTE"
->"<B
-CLASS="COMMAND"
->make man</B
->"</SPAN
->. (This is
-    a separate target due to dependencies on some obscure perl scripts
-    [now in CVS, but not well tested]. See comments in <TT
-CLASS="FILENAME"
->GNUmakefile</TT
->.)
-   </P
-><P
->    If you want to add new files to the webserver, create them locally in
-    the <TT
-CLASS="FILENAME"
->doc/webserver/*</TT
-> directory (or
-    create new directories under <TT
-CLASS="FILENAME"
->doc/webserver</TT
->).
-   </P
-><P
->    Next, commit any changes from the above steps to CVS. All set? 
-    If these are docs in the stable branch, then do:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  make webserver</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    This will do the upload to <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->the
-    webserver</A
-> (www.privoxy.org) and ensure all files and directories
-    there are group writable.
-   </P
-><P
->    Please do <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->NOT</I
-></SPAN
-> use any other means of transferring
-    files to the webserver to avoid permission problems. Also, please do not
-    upload docs from development branches or versions. The publicly posted
-    docs should be in sync with the last official release.
-   </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="newrelease.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="contact.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Releasing a New Version</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Contacting the developers, Bug Reporting and Feature Requests</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/configuration.html b/external/privoxy/doc/webserver/faq/configuration.html
deleted file mode 100644
index 01c001b..0000000
--- a/external/privoxy/doc/webserver/faq/configuration.html
+++ /dev/null
@@ -1,1797 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Configuration</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="NEXT"
-TITLE="Miscellaneous"
-HREF="misc.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="misc.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CONFIGURATION"
->3. Configuration</A
-></H1
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN354"
->3.1. What exactly is an <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> file?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> utilizes the concept of <SPAN
-CLASS="QUOTE"
->" <A
-HREF="../user-manual/actions-file.html#ACTIONS"
-TARGET="_top"
->actions</A
->"</SPAN
-> 
- that are used to manipulate and control web page data.
- <A
-HREF="../user-manual/actions-file.html"
-TARGET="_top"
->Actions files</A
->
- are where these <A
-HREF="../user-manual/actions-file.html#ACTIONS"
-TARGET="_top"
->actions</A
->
- that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> could take while processing a certain
- request, are configured. Typically, you would define a set of default actions
- that apply globally to all URLs, then add exceptions to these defaults where needed.
- There is a wide array of actions available that give the user a high degree
- of control and flexibility on how to process each and every web page.</P
-><P
-> Actions can be defined on a <A
-HREF="../user-manual/actions-file.html#AF-PATTERNS"
-TARGET="_top"
->URL pattern</A
-> basis, i.e.
- for single URLs, whole web sites, groups or parts thereof etc. Actions can also be
- grouped together and then applied to requests matching one or more patterns.
- There are many possible actions that might apply to any given site. As an example,
- if you are blocking <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
->
- as one of your default actions, but need to accept cookies from a given site,
- you would need to define an exception for this site in one of your actions
- files, preferably in <TT
-CLASS="FILENAME"
->user.action</TT
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="ACTIONSS"
->3.2. The <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> concept confuses me. Please list 
-some of these <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
->.</A
-></H3
-><P
-> For a comprehensive discussion of the actions concept, please refer
- to the <A
-HREF="../user-manual/actions-file.html"
-TARGET="_top"
->actions file
- chapter</A
-> in the <A
-HREF="../user-manual/index.html"
-TARGET="_top"
->User
- Manual</A
->. It includes a <A
-HREF="../user-manual/actions-file.html#ACTIONS"
-TARGET="_top"
->list of all actions</A
->
- and an <A
-HREF="../user-manual/actions-file.html#ACT-EXAMPLES"
-TARGET="_top"
->actions
- file tutorial</A
-> to get you started.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN377"
->3.3. How are actions files configured? What is the easiest
-way to do this?</A
-></H3
-><P
-> Actions files are just text files in a special syntax and can be edited
- with a text editor. But probably the easiest way is to access
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s user interface with your web browser
- at <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
- (Shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->) and then select
- <SPAN
-CLASS="QUOTE"
->"<A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->View &#38;
- change the current configuration</A
->"</SPAN
-> from the menu. Note 
- that this feature must be explicitly enabled in the main config file 
- (see <A
-HREF="../user-manual/config.html#ENABLE-EDIT-ACTIONS"
-TARGET="_top"
->enable-edit-actions</A
->).</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN386"
->3.4. There are several different <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> files. What are
-the differences?</A
-></H3
-><P
-> Three actions files 
- are being included by the developers, to be used for 
- different purposes: These are 
- <TT
-CLASS="FILENAME"
->default.action</TT
->, the <SPAN
-CLASS="QUOTE"
->"main"</SPAN
-> actions file
- which is actively maintained by the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- developers and typically sets the default policies, <TT
-CLASS="FILENAME"
->user.action</TT
->,
- where users are encouraged to make their private customizations.
- Please see <A
-HREF="../user-manual/actions-file.html"
-TARGET="_top"
->the actions chapter</A
->
- in the <A
-HREF="../user-manual/index.html"
-TARGET="_top"
->User Manual</A
-> for a more
- detailed explanation.</P
-><P
-> Earlier versions included three different versions of the 
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file. The new scheme allows for 
- greater flexibility of local configuration, and for browser based 
- selection of pre-defined <SPAN
-CLASS="QUOTE"
->"aggressiveness"</SPAN
-> levels.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="GETUPDATES"
->3.5. Where can I get updated Actions Files?</A
-></H3
-><P
->  Based on your feedback and the continuing development, updates of 
-  <TT
-CLASS="FILENAME"
->default.action</TT
-> will be
-  made available from time to time on the <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->files section</A
-> of
-  our <A
-HREF="http://sf.net/projects/ijbswa/";
-TARGET="_top"
->project page</A
->.
- </P
-><P
->  If you wish to receive an email notification whenever we release updates of
-  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> or the actions file, <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/";
-TARGET="_top"
->subscribe
-  to our announce mailing list</A
->, ijbswa-announce@xxxxxxxxxxxxxxxxxxxxxx
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NEWCONFIG"
->3.6. Can I use my old config files?</A
-></H3
-><P
->  The syntax and purpose of configuration files has remained roughly the
-  same throughout the 3.x series, but backwards compatibility is not guaranteed.
-  Also each release contains updated, <SPAN
-CLASS="QUOTE"
->"improved"</SPAN
-> versions and it is
-  therefore strongly recommended to install the newer configuration files
-  and merge back your modifications.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DIFFICULT"
->3.7. Why is the configuration so complicated?</A
-></H3
-><P
->  <SPAN
-CLASS="QUOTE"
->"Complicated"</SPAN
-> is in the eye of the beholder. Those that are 
-  familiar with some of the underlying concepts, such as regular expression
-  syntax, take to it like a fish takes to water. Also, software that tries
-  hard to be <SPAN
-CLASS="QUOTE"
->"user friendly"</SPAN
->, often lacks sophistication and
-  flexibility. There is always that trade-off there between power vs.
-  easy-of-use. Furthermore, anyone is welcome to contribute ideas and
-  implementations to enhance <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. 
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="YAHOO"
->3.8. How can I make my Yahoo/Hotmail/Gmail account work?</A
-></H3
-><P
->  The default configuration shouldn't impact the usability of any of these services.
-  It may, however, make all <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
-> 
-  temporary, so that your browser will forget your
-  login credentials in between browser sessions. If you would like not to have to log
-  in manually each time you access those websites, simply turn off all cookie handling
-  for them in the <TT
-CLASS="FILENAME"
->user.action</TT
-> file. An example for yahoo might
-  look like:
- </P
-><P
->  <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Allow all cookies for Yahoo login:
-#
-{ -<A
-HREF="../user-manual/actions-file.html#CRUNCH-INCOMING-COOKIES"
-TARGET="_top"
->crunch-incoming-cookies</A
-> -<A
-HREF="../user-manual/actions-file.html#CRUNCH-OUTGOING-COOKIES"
-TARGET="_top"
->crunch-outgoing-cookies</A
-> -<A
-HREF="../user-manual/actions-file.html#SESSION-COOKIES-ONLY"
-TARGET="_top"
->session-cookies-only</A
-> }
-.login.yahoo.com</PRE
-></TD
-></TR
-></TABLE
->
- </P
-><P
->  These kinds of sites are often quite complex and heavy with 
-  <A
-HREF="http://en.wikipedia.org/wiki/Javascript";
-TARGET="_top"
->Javascript</A
-> and 
-  thus <SPAN
-CLASS="QUOTE"
->"fragile"</SPAN
->. So if <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->still</I
-></SPAN
-> a problem, 
-  we have an <A
-HREF="../user-manual/actions-file.html#ALIASES"
-TARGET="_top"
->alias</A
-> just for such
-  sticky situations:
- </P
-><P
->  <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Gmail is a _fragile_ site:
-#
-{ <TT
-CLASS="LITERAL"
->fragile</TT
-> }
- # Gmail is ...
- mail.google.com</PRE
-></TD
-></TR
-></TABLE
->
- </P
-><P
->  Be sure to flush your browser's caches whenever making these kinds of
-  changes, just to make sure the changes <SPAN
-CLASS="QUOTE"
->"take"</SPAN
->.
- </P
-><P
->  Make sure the domain, host and path are appropriate as well. Your browser can
-  tell you where you are specifically and you should use that information for 
-  your configuration settings. Note that above it is not referenced as 
-  <TT
-CLASS="LITERAL"
->gmail.com</TT
->, which is a valid domain name.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="CONFIGFILES"
->3.9. What's the difference between the
-<SPAN
-CLASS="QUOTE"
->"Cautious"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"Medium"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
-> defaults?</A
-></H3
-><P
->  Configuring <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is not entirely trivial. To
-  help you get started, we provide you with three different default action
-  <SPAN
-CLASS="QUOTE"
->"profiles"</SPAN
-> in the web based actions file editor at <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->.
-  See the <A
-HREF="../user-manual/actions-file.html"
-TARGET="_top"
-><I
-CLASS="CITETITLE"
->User
-  Manual</I
-></A
-> for a list of actions, and how the default 
-  profiles are set.
- </P
-><P
-> Where the defaults are likely to break some sites, exceptions for
- known popular <SPAN
-CLASS="QUOTE"
->"problem"</SPAN
-> sites are included, but in
- general, the more aggressive your default settings are, the more exceptions
- you will have to make later. New users are best to start off in 
- <SPAN
-CLASS="QUOTE"
->"Cautious"</SPAN
-> setting. This is safest and will have the fewest 
- problems. See the <A
-HREF="../user-manual/index.html"
-TARGET="_top"
-><I
-CLASS="CITETITLE"
->User Manual</I
-></A
->
- for a more detailed discussion.</P
-><P
-> It should be noted that the <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
-> profile (formerly known 
- as the <SPAN
-CLASS="QUOTE"
->"Adventuresome"</SPAN
-> profile) is more
- aggressive, and will make use of some of 
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> advanced features. Use at your own risk!</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="BROWSECONFIG"
->3.10. Why can I change the configuration 
-with a browser? Does that not raise security issues?</A
-></H3
-><P
->  It may seem strange that regular users can edit the config files with their
-  browsers, although the whole <TT
-CLASS="FILENAME"
->/etc/privoxy</TT
-> hierarchy
-  belongs to the user <SPAN
-CLASS="QUOTE"
->"privoxy"</SPAN
->, with only 644 permissions.
- </P
-><P
->  When you use the browser-based editor, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-  itself is writing to the config files.  Because
-  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is running as the user <SPAN
-CLASS="QUOTE"
->"privoxy"</SPAN
->,
-  it can update its own config files.
- </P
-><P
->  If you run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> for multiple untrusted users (e.g. in
-  a LAN) or aren't entirely in control of your own browser, you will probably want
-  to make sure that the the web-based editor and remote toggle features are
-  <SPAN
-CLASS="QUOTE"
->"off"</SPAN
-> by setting <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/config.html#ENABLE-EDIT-ACTIONS"
-TARGET="_top"
->enable-edit-actions</A
->
-  0</TT
->"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/config.html#ENABLE-REMOTE-TOGGLE"
-TARGET="_top"
->enable-remote-toggle</A
->
-  0</TT
->"</SPAN
-> in the <A
-HREF="../user-manual/config.html"
-TARGET="_top"
->main configuration file</A
->.
- </P
-><P
->  As of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7 these options are disabled by default.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN481"
->3.11. What is the <TT
-CLASS="FILENAME"
->default.filter</TT
-> file? What is a <SPAN
-CLASS="QUOTE"
->"filter"</SPAN
->?</A
-></H3
-><P
-> The <A
-HREF="../user-manual/filter-file.html"
-TARGET="_top"
-><TT
-CLASS="FILENAME"
->default.filter</TT
-></A
->
- file is where <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->filters</I
-></SPAN
-> as supplied by the developers are defined.
- Filters are a special subset of actions that can be used to modify or
- remove web page content or headers on the fly. Content filters can
- be applied to <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->anything</I
-></SPAN
-> in the page source,
- header filters can be applied to either server or client headers.
- Regular expressions are used to accomplish this.</P
-><P
-> There are a number of pre-defined filters to deal with common annoyances. The
- filters are only defined here, to invoke them, you need to use the
- <A
-HREF="../user-manual/actions-file.html#FILTER"
-TARGET="_top"
-><TT
-CLASS="LITERAL"
->filter</TT
->
- action</A
-> in one of the actions files. Content filtering is automatically
- disabled for inappropriate MIME types, but if you now better than Privoxy
- what should or should not be filtered you can filter any content you like.</P
-><P
-> Filters should
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> be confused with <A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
-><TT
-CLASS="LITERAL"
->blocks</TT
-></A
->, which
- is a completely different action, and is more typically used to block ads and
- unwanted sites.</P
-><P
-> If you are familiar with regular expressions, and HTML, you can look at 
- the provided <TT
-CLASS="FILENAME"
->default.filter</TT
-> with a text editor and define
- your own filters.  This is potentially a very powerful feature, but
- requires some expertise in both regular expressions and HTML/HTTP. 
-  You should 
- place any modifications to the default filters, or any new ones you create 
- in a separate file, such as <TT
-CLASS="FILENAME"
->user.filter</TT
->, so they won't 
- be overwritten during upgrades. 
- The ability to define multiple filter files 
- in <TT
-CLASS="FILENAME"
->config</TT
-> is a new feature as of v. 3.0.5.</P
-><P
-> There is no GUI editor option for this part of the configuration, 
- but you can disable/enable the various pre-defined filters of the included 
- <TT
-CLASS="FILENAME"
->default.filter</TT
-> file with the <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->web-based actions file editor</A
->.
- Note that the custom actions editor must be explicitly enabled in
- the main config file (see <A
-HREF="../user-manual/config.html#ENABLE-EDIT-ACTIONS"
-TARGET="_top"
->enable-edit-actions</A
->).</P
-><P
-> If you intend to develop your own filters, you might want to have a look at
- <A
-HREF="http://www.fabiankeil.de/sourcecode/pft/";
-TARGET="_top"
->Privoxy-Filter-Test</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="LANCONFIG"
->3.12. How can I set up Privoxy to act as a proxy for my 
- LAN?</A
-></H3
-><P
-> By default, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> only responds to requests 
- from <TT
-CLASS="LITERAL"
->127.0.0.1</TT
-> (localhost). To have it act as a server for
- a network, this needs to be changed in the <A
-HREF="../user-manual/config.html"
-TARGET="_top"
->main configuration file</A
->. Look for
- the <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/config.html#LISTEN-ADDRESS"
-TARGET="_top"
->listen-address</A
-></TT
->
- option, which may be commented out with a <SPAN
-CLASS="QUOTE"
->"#"</SPAN
-> symbol. Make sure
- it is uncommented, and assign it the address of the LAN gateway interface,
- and port number to use. Assuming your LAN address is 192.168.1.1 and you
- wish to run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on port 8118, this line
- should look like:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  listen-address  192.168.1.1:8118</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Save the file, and restart <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. Configure 
- all browsers on the network then to use this address and port number.</P
-><P
-> Alternately, you can have <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> listen on 
- all available interfaces:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  listen-address    :8118</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> And then use <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> 
- <A
-HREF="../user-manual/config.html#PERMIT-ACCESS"
-TARGET="_top"
->permit-access</A
-> 
- feature to limit connections. A firewall in this situation is recommended 
- as well.</P
-><P
-> The above steps should be the same for any TCP network, regardless of
- operating system.</P
-><P
-> If you run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on a LAN with untrusted users,
- we recommend that you double-check the <A
-HREF="../user-manual/config.html#ACCESS-CONTROL"
-TARGET="_top"
->access control and security</A
->
- options!</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN532"
->3.13. Instead of ads, now I get a checkerboard pattern. I don't want to see anything.</A
-></H3
-><P
-> The replacement for blocked images can be controlled with the <A
-HREF="../user-manual/actions-file.html#SET-IMAGE-BLOCKER"
-TARGET="_top"
-><TT
-CLASS="LITERAL"
->set-image-blocker</TT
->
- action</A
->. You have the choice of a checkerboard pattern, a transparent 1x1 GIF
- image (aka <SPAN
-CLASS="QUOTE"
->"blank"</SPAN
->), or a redirect to a custom image of your choice.
- Note that this choice only has effect for images which are blocked as images, i.e.
- whose URLs match both a <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#HANDLE-AS-IMAGE"
-TARGET="_top"
->handle-as-image</A
-></TT
->
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
-> <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
->block</A
-></TT
-> action.</P
-><P
-> If you want to see nothing, then change the <A
-HREF="../user-manual/actions-file.html#SET-IMAGE-BLOCKER"
-TARGET="_top"
-><TT
-CLASS="LITERAL"
->set-image-blocker</TT
->
- action</A
-> to <SPAN
-CLASS="QUOTE"
->"blank"</SPAN
->. This can be done by editing the 
- <TT
-CLASS="FILENAME"
->user.action</TT
-> file, or through the <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->web-based actions file editor</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN549"
->3.14. Why would anybody want to see a checkerboard pattern?</A
-></H3
-><P
-> Remember that <A
-HREF="general.html#WHATSANAD"
->telling which image is an ad and which
- isn't</A
->, is an educated guess. While we hope that the standard configuration
- is rather smart, it will make occasional mistakes. The checkerboard image is visually
- decent, and it shows you where images have been blocked, which can be very
- helpful in case some navigation aid or otherwise innocent image was
- erroneously blocked. It is recommended for new users so they can 
- <SPAN
-CLASS="QUOTE"
->"see"</SPAN
-> what is happening. Some people might also enjoy seeing how
- many banners they <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->don't</I
-></SPAN
-> have to see.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN555"
->3.15. I see some images being replaced with text
-instead of the checkerboard image. Why and how do I get rid of this?</A
-></H3
-><P
-> This happens when the banners are not embedded in the HTML code of the
- page itself, but in separate HTML (sub)documents that are loaded into (i)frames
- or (i)layers, and these external HTML documents are blocked. Being non-images
- they get replaced by a substitute HTML page rather than a substitute image,
- which wouldn't work out technically, since the browser expects and accepts
- only HTML when it has requested an HTML document. </P
-><P
-> The substitute page adapts to the available space and shows itself as a
- miniature two-liner if loaded into small frames, or full-blown with a
- large red "BLOCKED" banner if space allows.</P
-><P
-> If you prefer the banners to be blocked by images, you must see to it that
- the HTML documents in which they are embedded are not blocked. Clicking
- the <SPAN
-CLASS="QUOTE"
->"See why"</SPAN
-> link offered in the substitute page will show
- you which rule blocked the page. After changing the rule and un-blocking
- the HTML documents, the browser will try to load the actual banner images
- and the usual image blocking will (hopefully!) kick in.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SRVANY"
->3.16. Can Privoxy run as a service 
-on Win2K/NT/XP?</A
-></H3
-><P
-> Yes. Version 3.0.5 introduces full <SPAN
-CLASS="APPLICATION"
->Windows</SPAN
-> service
- functionality. See <A
-HREF="../user-manual/installation.html#installation-pack-win"
-TARGET="_top"
-> the <I
-CLASS="CITETITLE"
->User Manual</I
-></A
-> for details on how to install and configure 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as a service.</P
-><P
-> Earlier 3.x versions could run as a system service using <B
-CLASS="COMMAND"
->srvany.exe</B
->.
- See the discussion at <A
-HREF="http://sourceforge.net/tracker/?func=detail&#38;atid=361118&#38;aid=485617&#38;group_id=11118";
-TARGET="_top"
->http://sourceforge.net/tracker/?func=detail&#38;atid=361118&#38;aid=485617&#38;group_id=11118</A
->,
- for details, and a sample configuration.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="OTHERPROXY"
->3.17. How can I make Privoxy work with other 
-proxies like Squid or Tor?</A
-></H3
-><P
-> This can be done and is often useful to combine the benefits of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with those of a another proxy.
- See the <A
-HREF="../user-manual/config.html#FORWARDING"
-TARGET="_top"
->forwarding chapter</A
->
- in the <A
-HREF="../user-manual/index.html"
-TARGET="_top"
->User Manual</A
-> which
- describes how to do this, and the <A
-HREF="misc.html#TOR"
-> How do I use Privoxy together with 
- Tor</A
-> section below.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="PORT-80"
->3.18. Can I just set Privoxy to use port 80
-and thus avoid individual browser configuration?</A
-></H3
-><P
-> No, its more complicated than that. This only works with special kinds 
- of proxies known as <SPAN
-CLASS="QUOTE"
->"intercepting"</SPAN
-> proxies (see below).</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="TRANSPARENT"
->3.19. Can Privoxy run as a <SPAN
-CLASS="QUOTE"
->"transparent"</SPAN
-> proxy?</A
-></H3
-><P
-> The whole idea of Privoxy is to modify client requests
- and server responses in all sorts of ways and therefore
- it's not a transparent proxy as described in
- <A
-HREF="http://tools.ietf.org/html/rfc2616";
-TARGET="_top"
->RFC 2616</A
->.</P
-><P
-> However, some people say <SPAN
-CLASS="QUOTE"
->"transparent proxy"</SPAN
-> when they
- mean <SPAN
-CLASS="QUOTE"
->"intercepting proxy"</SPAN
->. If you are one of them,
- please read the <A
-HREF="#intercepting"
-TARGET="_top"
->next entry</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="INTERCEPTING"
->3.20. Can Privoxy run as a <SPAN
-CLASS="QUOTE"
->"intercepting"</SPAN
-> proxy?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can't intercept traffic itself,
-  but it can handle requests that where intercepted and redirected
-  with a packet filter (like <SPAN
-CLASS="APPLICATION"
->PF</SPAN
-> or
-  <SPAN
-CLASS="APPLICATION"
->iptables</SPAN
->), as long as the <TT
-CLASS="LITERAL"
->Host</TT
->
-  header is present. 
-  </P
-><P
->  As the <TT
-CLASS="LITERAL"
->Host</TT
-> header is required by HTTP/1.1 and as most
-  web sites rely on it anyway, this limitation shouldn't be a problem.</P
-><P
->  Please refer to your packet filter's documentation to learn how to
-  intercept and redirect traffic into <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-  Afterward you just have to configure <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to
-  <A
-HREF="../user-manual/config.html#ACCEPT-INTERCEPTED-REQUESTS"
-TARGET="_top"
->accept
-  intercepted requests</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="OUTLOOK"
->3.21. How can I configure Privoxy for use with Outlook?</A
-></H3
-><P
-> Versions of <SPAN
-CLASS="APPLICATION"
->Outlook</SPAN
-> prior to Office 2007, use
- <SPAN
-CLASS="APPLICATION"
->Internet Explorer</SPAN
-> components to both render HTML,
- and fetch any HTTP requests that may be embedded in an HTML email. So however
- you have <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> configured to work with IE, this
- configuration should automatically be shared, at least with older version of
- Internet Explorer.</P
-><P
-> Starting with Office 2007, Microsoft is instead using the MS-Word rendering
- engine with Outlook. It is unknown whether this can be configured to use a
- proxy.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="OUTLOOK-MORE"
->3.22. How can I have separate rules just for HTML mail?</A
-></H3
-><P
-> The short answer is, you can't. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has no way
- of knowing which particular application makes a request, so there is no way to
- distinguish between web pages and HTML mail.
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> just blindly proxies all requests. In the
- case of <SPAN
-CLASS="APPLICATION"
->Outlook Express</SPAN
-> (see above), OE uses 
- IE anyway, and there is no way for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to ever 
- be able to distinguish between them (nor could any other proxy type application for
- that matter).</P
-><P
-> For a good discussion of some of the issues involved (including privacy and 
- security issues), see 
- <A
-HREF="http://sourceforge.net/tracker/?func=detail&#38;atid=211118&#38;aid=629518&#38;group_id=11118";
-TARGET="_top"
->http://sourceforge.net/tracker/?func=detail&#38;atid=211118&#38;aid=629518&#38;group_id=11118</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SNEAKY-COOKIES"
->3.23. I sometimes notice cookies sneaking through. How?</A
-></H3
-><P
-> <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->Cookies</A
-> can be 
- set in several ways. The classic method is via the 
- <TT
-CLASS="LITERAL"
->Set-Cookie</TT
-> HTTP header. This is straightforward, and an
- easy one to manipulate, such as the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> concept of 
- <A
-HREF="../user-manual/actions-file.html#SESSION-COOKIES-ONLY"
-TARGET="_top"
->session-cookies-only</A
->.
- There is also the possibility of using 
-  <A
-HREF="http://en.wikipedia.org/wiki/Javascript";
-TARGET="_top"
->Javascript</A
-> to
- set cookies (<SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> calls these <TT
-CLASS="LITERAL"
->content-cookies</TT
->). This
- is trickier because the syntax can vary widely, and thus requires a certain
- amount of guesswork. It is not realistic to catch all of these short of
- disabling Javascript, which would break many sites. And lastly, if the
- cookies are embedded in a HTTPS/SSL secure session via Javascript, they are beyond
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> reach.</P
-><P
-> All in all, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can help manage cookies in general, can help minimize
- the loss of privacy posed by cookies, but can't realistically stop all
- cookies.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="EVIL-COOKIES"
->3.24. Are all cookies bad? Why?</A
-></H3
-><P
-> No, in fact there are many beneficial uses of 
- <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
->. Cookies are just a
- method that browsers can use to store data between pages, or between browser
- sessions. Sometimes there is a good reason for this, and the user's life is a
- bit easier as a result. But there is a long history of some websites taking
- advantage of this layer of trust, and using the data they glean from you and 
- your browsing habits for their own purposes, and maybe to your potential
- detriment. Such sites are using you and storing their data on your system.
- That is why the privacy conscious watch from whom those cookies come, and why
- they really <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->need</I
-></SPAN
-> to be there.</P
-><P
->  See the 
-   <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->Wikipedia cookie
-  definition</A
-> for more.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="ALLOW-COOKIES"
->3.25. How can I allow permanent cookies for my trusted sites?</A
-></H3
-><P
->  There are several actions that relate to cookies. The default behavior is to 
-  allow only <SPAN
-CLASS="QUOTE"
->"session cookies"</SPAN
->, which means the cookies only last
-  for the current browser session. This eliminates most kinds of abuse related 
-  to cookies. But there may be cases where you want cookies to last.</P
-><P
->  To disable all cookie actions, so that cookies are allowed unrestricted,
-  both in and out, for <TT
-CLASS="LITERAL"
->example.com</TT
->: </P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} }
-  .example.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Place the above in <TT
-CLASS="FILENAME"
->user.action</TT
->. Note that some of these may
- be off by default anyway, so this might be redundant, but there is no harm
- being explicit in what you want to happen. <TT
-CLASS="FILENAME"
->user.action</TT
->
- includes an alias for this situation, called
- <TT
-CLASS="LITERAL"
->allow-all-cookies</TT
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="MULTIPLES"
->3.26. Can I have separate configurations for different users?</A
-></H3
-><P
-> Each instance of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has its own
- configuration, including such attributes as the TCP port that it listens on.
- What you can do is run multiple instances of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, each with 
- a unique 
- <A
-HREF="../user-manual/config.html#LISTEN-ADDRESS"
-TARGET="_top"
->listen-address</A
->
- configuration setting, and configuration path, and then
- each of these can have their own configurations. Think of it as per-port
- configuration.</P
-><P
-> 
- Simple enough for a few users, but for large installations, consider having
- groups of users that might share like configurations.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WHITELISTS"
->3.27. Can I set-up Privoxy as a whitelist of
-<SPAN
-CLASS="QUOTE"
->"good"</SPAN
-> sites?</A
-></H3
-><P
-> Sure. There are a couple of things you can do for simple white-listing.
- Here's one real easy one:</P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> ############################################################
- # Blacklist
- ############################################################
- { <A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
->+block</A
-> }
- / # Block *all* URLs
- 
- ############################################################
- # Whitelist
- ############################################################
- { <A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
->-block</A
-> }
-  kids.example.com
-  toys.example.com
-  games.example.com</PRE
-></TD
-></TR
-></TABLE
-><P
-> This allows access to only those three sites by first blocking all URLs, and 
- then subsequently allowing three specific exceptions.</P
-><P
-> Another approach is <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> 
- <TT
-CLASS="LITERAL"
->trustfile</TT
-> concept, which incorporates the notion of 
- <SPAN
-CLASS="QUOTE"
->"trusted referrers"</SPAN
->. See the <A
-HREF="../user-manual/config.html#TRUSTFILE"
-TARGET="_top"
->Trust documentation</A
->
- for details.</P
-><P
-> These are fairly simple approaches and are not completely foolproof. There
- are various other configuration options that should be disabled (described
- elsewhere here and in <A
-HREF="../user-manual/"
-TARGET="_top"
->the User Manual</A
->)
- so that users can't modify their own configuration and easily circumvent the
- whitelist.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NO-ADBLOCK"
->3.28. How can I turn off ad-blocking?</A
-></H3
-><P
-> Ad blocking is achieved through a complex application of various <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
- <A
-HREF="../user-manual/actions-file.html"
-TARGET="_top"
->actions</A
->. These 
- actions are deployed against simple images, banners, flash animations, 
- text pages, JavaScript, pop-ups and pop-unders, etc., so its not as simple as
- just turning one or two actions off. The various actions that make up
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> ad blocking are hard-coded into the default configuration files. It
- has been assumed that everyone using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is interested in this
- particular feature. 
- </P
-><P
-> If you want to do without this, there are several approaches you can take:
- You can manually undo the many block rules in
- <TT
-CLASS="FILENAME"
->default.action</TT
->. Or even easier, just create your own
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file from scratch without the many ad
- blocking rules, and corresponding exceptions. Or lastly, if you are not
- concerned about the additional blocks that are done for privacy reasons, you
- can very easily over-ride <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> blocking with the
- following very simple rule in your <TT
-CLASS="FILENAME"
->user.action</TT
->: 
- </P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # Unblock everybody, everywhere
- { <A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
->-block</A
-> }
- / # UN-Block *all* URLs</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> 
- Or even a more comprehensive reversing of various ad related actions:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # Unblock everybody, everywhere, and turn off appropriate filtering, etc
- { <A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
->-block</A
-> \
-  <A
-HREF="../user-manual/actions-file.html#FILTER-BANNERS-BY-SIZE"
-TARGET="_top"
->-filter{banners-by-size}</A
-> \
-  <A
-HREF="../user-manual/actions-file.html#FILTER-BANNERS-BY-LINK"
-TARGET="_top"
->-filter{banners-by-link}</A
-> \
-  <TT
-CLASS="LITERAL"
->allow-popups</TT
-> \
- }
- / # UN-Block *all* URLs and allow ads</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> This last <SPAN
-CLASS="QUOTE"
->"action"</SPAN
-> in this compound statement,
- <TT
-CLASS="LITERAL"
->allow-popups</TT
->, is an <A
-HREF="../user-manual/actions-file.html#ALIASES"
-TARGET="_top"
->alias</A
-> that disables
- various pop-up blocking features.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="TEMPLATES"
->3.29. How can I have custom template pages, like the 
-<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->BLOCKED</I
-></SPAN
-> page?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> <SPAN
-CLASS="QUOTE"
->"templates"</SPAN
-> are specialized text files utilized by
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> for various purposes and can easily be modified using any text
- editor. All the template pages are installed in a sub-directory appropriately
- named: <TT
-CLASS="FILENAME"
->templates</TT
->.  Knowing something about HTML syntax
- will of course be helpful.</P
-><P
-> Be forewarned that the default templates are subject to being overwritten
- during upgrades. You can, however, create completely new templates,
- place them in another directory and specify the alternate path in the main
- <TT
-CLASS="FILENAME"
->config</TT
->. For details, have a look at the <A
-HREF="../user-manual/config.html#templdir"
-TARGET="_top"
->templdir</A
-> option. </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="BLOCKALL"
->3.30. How can I remove the <SPAN
-CLASS="QUOTE"
->"Go There Anyway"</SPAN
-> link from 
-the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->BLOCKED</I
-></SPAN
-> page?</A
-></H3
-><P
-> There is more than one way to do it (although Perl is not involved).</P
-><P
-> Editing the BLOCKED template page (see above) may dissuade some users, but
- this method is easily circumvented. Where you need this level of control, you
- might want to build <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> from source, and disable various features that are
- available as compile-time options. You should 
- <B
-CLASS="COMMAND"
->configure</B
-> the sources as follows:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> ./configure  --disable-toggle  --disable-editor  --disable-force</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> This will create an executable with hard-coded security features so that
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> does not allow easy bypassing of blocked sites, or changing the
- current configuration via any connected user's web browser.</P
-><P
-> Finally, all of these features can also be toggled on/off via options in
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> main  <A
-HREF="../user-manual/config.html#ACCESS-CONTROL"
-TARGET="_top"
->config</A
-> file which
- means you don't have to recompile anything.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="misc.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Installation</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Miscellaneous</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/contact.html b/external/privoxy/doc/webserver/faq/contact.html
deleted file mode 100644
index c9d18c7..0000000
--- a/external/privoxy/doc/webserver/faq/contact.html
+++ /dev/null
@@ -1,510 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Contacting the developers, Bug Reporting and Feature Requests</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Troubleshooting"
-HREF="trouble.html"><LINK
-REL="NEXT"
-TITLE="Privoxy Copyright, License and History"
-HREF="copyright.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="trouble.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CONTACT"
->6. Contacting the developers, Bug Reporting and Feature Requests</A
-></H1
-><P
-> We value your feedback. In fact, we rely on it to improve
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and its configuration.
- However, please note the following hints, so we can 
- provide you with the best support:</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-SUPPORT"
->6.1. Get Support</A
-></H2
-><P
-> For casual users, our 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";
-TARGET="_top"
->support forum at SourceForge</A
->
- is probably best suited:
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";
-TARGET="_top"
->http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118</A
-></P
-><P
-> All users are of course welcome to discuss their issues on the <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-users";
-TARGET="_top"
->users
- mailing list</A
->, where the developers also hang around.</P
-><P
-> Please don't sent private support requests to individual Privoxy
- developers, either use the mailing lists or the support trackers.</P
-><P
-> Note that the Privoxy mailing lists are moderated. Posts from unsubscribed
- addresses have to be accepted manually by a moderator. This may cause a
- delay of several days and if you use a subject that doesn't clearly
- mention Privoxy or one of its features, your message may be accidentally
- discarded as spam.</P
-><P
-> If you aren't subscribed, you should therefore spend a few seconds
- to come up with a proper subject. Additionally you should make it clear
- that you want to get CC'd. Otherwise some responses will be directed to
- the mailing list only, and you won't see them.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="REPORTING"
->6.2. Reporting Problems</A
-></H2
-><P
-><SPAN
-CLASS="QUOTE"
->"Problems"</SPAN
-> for our purposes, come in two forms:</P
-><P
-></P
-><UL
-><LI
-><P
->    Configuration issues, such as ads that slip through, or sites that 
-    don't function properly due to one <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
-    <SPAN
-CLASS="QUOTE"
->"action"</SPAN
-> or another being turned <SPAN
-CLASS="QUOTE"
->"on"</SPAN
->.
-   </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="QUOTE"
->"Bugs"</SPAN
-> in the programming code that makes up 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, such as that might cause a crash.
-   </P
-></LI
-></UL
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="CONTACT-ADS"
->6.2.1. Reporting Ads or Other Configuration Problems</A
-></H3
-><P
-> Please send feedback on ads that slipped through, innocent images that were
- blocked, sites that don't work properly, and other configuration related problem of 
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file, to 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=460288";
-TARGET="_top"
-> http://sourceforge.net/tracker/?group_id=11118&#38;atid=460288</A
->,
- the Actions File Tracker.</P
-><P
-> New, improved <TT
-CLASS="FILENAME"
->default.action</TT
-> files may occasionally be made
- available based on your feedback. These will be announced on the <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce";
-TARGET="_top"
->ijbswa-announce</A
->
- list and available from our the <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->files section</A
-> of
- our <A
-HREF="http://sf.net/projects/ijbswa/";
-TARGET="_top"
->project page</A
->.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="CONTACT-BUGS"
->6.2.2. Reporting Bugs</A
-></H3
-><P
-> Please report all bugs through our bug tracker: 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=111118";
-TARGET="_top"
->http://sourceforge.net/tracker/?group_id=11118&#38;atid=111118</A
->. </P
-><P
->  Before doing so, please make sure that the bug has <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not already been submitted</I
-></SPAN
->
-  and observe the additional hints at the top of the <A
-HREF="http://sourceforge.net/tracker/?func=add&#38;group_id=11118&#38;atid=111118";
-TARGET="_top"
->submit
-  form</A
->. If already submitted, please feel free to add any info to the 
-  original report that might help to solve the issue.</P
-><P
->  Please try to verify that it is a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> bug,
-  and not a browser or site bug or documented behaviour that just happens
-  to be different than what you expected. If unsure,
-  try <A
-HREF="http://config.privoxy.org/toggle?set=disable";
-TARGET="_top"
->toggling
-  off</A
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and see if the problem persists.</P
-><P
->  If you are using your own custom configuration, please try
-  the stock configs to see if the problem is configuration related.
-  If you're having problems with a feature that is disabled by default,
-  please ask around on the mailing list if others can reproduce the problem.</P
-><P
->  If you aren't using the latest Privoxy version, the bug may have been found
-  and fixed in the meantime. We would appreciate if you could take the time
-  to <A
-HREF="http://www.privoxy.org/user-manual/installation.html";
-TARGET="_top"
->upgrade
-  to the latest version</A
-> (or  even the latest CVS snapshot) and verify
-  that your bug still exists.</P
-><P
->Please be sure to provide the following information:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    The exact <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version you are using
-    (if you got the source from CVS, please also provide the source code revisions
-     as shown in <A
-HREF="http://config.privoxy.org/show-version";
-TARGET="_top"
->http://config.privoxy.org/show-version</A
->).
-   </P
-></LI
-><LI
-><P
->    The operating system and versions you run
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on, (e.g. <SPAN
-CLASS="APPLICATION"
->Windows
-    XP SP2</SPAN
->), if you are using a Unix flavor,
-    sending the output of <SPAN
-CLASS="QUOTE"
->"uname -a"</SPAN
-> should do,
-    in case of GNU/Linux, please also name the distribution.
-   </P
-></LI
-><LI
-><P
->    The name, platform, and version of the <SPAN
-CLASS="APPLICATION"
->browser</SPAN
-> 
-    you were using (e.g. <SPAN
-CLASS="APPLICATION"
->Internet Explorer v5.5</SPAN
-> for Mac).
-   </P
-></LI
-><LI
-><P
->    The URL where the problem occurred, or some way for us to duplicate the
-    problem (e.g. <TT
-CLASS="LITERAL"
->http://somesite.example.com/?somethingelse=123</TT
->). 
-   </P
-></LI
-><LI
-><P
->    Whether your version of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is one supplied
-    by the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developers via SourceForge,
-    or if you got your copy somewhere else.
-   </P
-></LI
-><LI
-><P
->    Whether you are using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in tandem with 
-    another proxy such as <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->. If so, please
-    temporary disable the other proxy to see if the symptoms change.
-   </P
-></LI
-><LI
-><P
->    Whether you are using a personal firewall product. If so, does 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> work without it?
-   </P
-></LI
-><LI
-><P
->    Any other pertinent information to help identify the problem such as config
-    or log file excerpts (yes, you should have log file entries for each
-    action taken).
-   </P
-></LI
-></UL
-></P
-><P
-> You don't have to tell us your actual name when filing a problem
- report, but please use a nickname so we can differentiate between
- your messages and the ones entered by other "anonymous" users that
- may respond to your request if they have the same problem or already
- found a solution.</P
-><P
-> Please also check the status of your request a few days after submitting
- it, as we may request additional information. If you use a SF id,
- you should automatically get a mail when someone responds to your request.</P
-><P
->  The <A
-HREF="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT";
-TARGET="_top"
->appendix
-  of the Privoxy User Manual</A
-> also has helpful information 
-  on understanding <TT
-CLASS="LITERAL"
->actions</TT
->, and <TT
-CLASS="LITERAL"
->action</TT
-> debugging. </P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-FEATURE"
->6.3. Request New Features</A
-></H2
-><P
-> You are welcome to submit ideas on new features or other proposals
- for improvement through our feature request tracker at
- <A
-HREF="http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118";
-TARGET="_top"
->http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-OTHER"
->6.4. Other</A
-></H2
-><P
->For any other issues, feel free to use the mailing lists. Technically interested users
-and people who wish to contribute to the project are also welcome on the developers list!
-You can find an overview of all <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->-related mailing lists,
-including list archives, at:
-<A
-HREF="http://sourceforge.net/mail/?group_id=11118";
-TARGET="_top"
->http://sourceforge.net/mail/?group_id=11118</A
->.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="trouble.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Troubleshooting</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Privoxy Copyright, License and History</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/copyright.html b/external/privoxy/doc/webserver/faq/copyright.html
deleted file mode 100644
index 39b71a6..0000000
--- a/external/privoxy/doc/webserver/faq/copyright.html
+++ /dev/null
@@ -1,301 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy Copyright, License and History</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Contacting the developers, Bug Reporting and Feature Requests"
-HREF="contact.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="contact.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
->&nbsp;</TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="COPYRIGHT"
->7. Privoxy Copyright, License and History</A
-></H1
-><P
-> Copyright © 2001-2009 by Privoxy Developers <CODE
-CLASS="EMAIL"
->&#60;<A
-HREF="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";
->ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</A
->&#62;</CODE
-></P
-><P
-> Some source code is based on code Copyright © 1997 by Anonymous Coders
- and Junkbusters, Inc. and licensed under the <I
-CLASS="CITETITLE"
->GNU General Public
- License</I
->.</P
-><P
->   Portions of this document are <SPAN
-CLASS="QUOTE"
->"borrowed"</SPAN
-> from the original
-   <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
-> (tm) FAQ, and modified as 
-   appropriate for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-  </P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN1451"
->7.1. License</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is free software; you can
- redistribute it and/or modify it under the terms of the 
- <I
-CLASS="CITETITLE"
->GNU General Public License</I
->, version 2,
- as published by the Free Software Foundation.</P
-><P
-> This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
-> <I
-CLASS="CITETITLE"
->GNU General Public License</I
-></A
-> for details.</P
-><P
-> You should have received a copy of the <I
-CLASS="CITETITLE"
->GNU GPL</I
->
- along with this program; if not, write to the <P
-CLASS="ADDRESS"
->&nbsp;Free&nbsp;Software<br>
-&nbsp;Foundation,&nbsp;Inc.&nbsp;<SPAN
-CLASS="STREET"
->51 Franklin Street, Fifth Floor</SPAN
-><br>
-&nbsp;<SPAN
-CLASS="CITY"
->Boston</SPAN
->,&nbsp;<SPAN
-CLASS="STATE"
->MA</SPAN
->&nbsp;<SPAN
-CLASS="POSTCODE"
->02110-1301</SPAN
-><br>
-&nbsp;<SPAN
-CLASS="COUNTRY"
->USA</SPAN
->&nbsp;</P
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN1467"
->7.2. History</A
-></H2
-><P
-> A long time ago, there was the
- <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
-><SPAN
-CLASS="APPLICATION"
->Internet Junkbuster</SPAN
-></A
->, 
- by Anonymous Coders and <A
-HREF="http://www.junkbusters.com/";
-TARGET="_top"
->Junkbusters
- Corporation</A
->. This saved many users a lot of pain in the early days of
- web advertising and user tracking.</P
-><P
-> But the web, its protocols and standards, and with it, the techniques for
- forcing ads on users, give up autonomy over their browsing, and
- for tracking them, keeps evolving. Unfortunately, the <SPAN
-CLASS="APPLICATION"
->Internet
- Junkbuster</SPAN
-> did not. Version 2.0.2, published in 1998, was 
- (and is) the last official
- <A
-HREF="http://www.junkbusters.com/ijbdist.html#release";
-TARGET="_top"
->release</A
->
- available from <A
-HREF="http://www.junkbusters.com";
-TARGET="_top"
->Junkbusters Corporation</A
->.
- Fortunately, it had been released under the GNU
- <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
->GPL</A
->,
- which allowed further development by others.</P
-><P
-> So Stefan Waldherr started maintaining an improved version of the
- software, to which eventually a number of people contributed patches.
- It could already replace banners with a transparent image, and had a first
- version of pop-up killing, but it was still very closely based on the
- original, with all its limitations, such as the lack of HTTP/1.1 support,
- flexible per-site configuration, or content modification. The last release
- from this effort was version 2.0.2-10, published in 2000.</P
-><P
-> Then, some
- <A
-HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS";
-TARGET="_top"
->developers</A
->
- picked up the thread, and started turning the software inside out, upside down,
- and then reassembled it, adding many
- <A
-HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES";
-TARGET="_top"
->new
- features</A
-> along the way.</P
-><P
-> The result of this is <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, whose first
- stable version, 3.0, was released August, 2002. 
- </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="contact.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->&nbsp;</TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Contacting the developers, Bug Reporting and Feature Requests</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->&nbsp;</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/general.html b/external/privoxy/doc/webserver/faq/general.html
deleted file mode 100644
index 7043b18..0000000
--- a/external/privoxy/doc/webserver/faq/general.html
+++ /dev/null
@@ -1,1076 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->General Information</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="NEXT"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="installation.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="GENERAL"
->1. General Information</A
-></H1
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WHO-USES"
->1.1. Who should give <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> a try?</A
-></H3
-><P
->  Anyone who is interested in security, privacy, or in 
-  finer-grained control over their web and Internet experience.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="BESTCHOICE"
->1.2. Is Privoxy the best choice for
-me?</A
-></H3
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is certainly a good choice, especially for those who want more 
-  control and security. Those with the willingness to read the documentation
-  and the ability to fine-tune their installation will benefit the most.
- </P
-><P
->  One of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
-  strengths is that it is highly configurable giving you the ability to
-  completely personalize your installation. Being familiar with, or at least
-  having an interest in learning about <A
-HREF="http://en.wikipedia.org/wiki/Http";
-TARGET="_top"
->HTTP</A
-> and other networking
-  protocols, <A
-HREF="http://en.wikipedia.org/wiki/Html";
-TARGET="_top"
->HTML</A
->, and 
-  <A
-HREF="http://en.wikipedia.org/wiki/Regular_expressions";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"Regular
-  Expressions"</SPAN
-></A
->
-  will be a big plus and will help you get the most out of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. 
-  A new installation just includes a very basic configuration. The user 
-  should take this as a starting point only, and enhance it as he or she 
-  sees fit. In fact, the user is encouraged, and expected to, fine-tune the 
-  configuration.
- </P
-><P
->  Much of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> configuration can be done 
-  with a <A
-HREF="http://en.wikipedia.org/wiki/Web_browser";
-TARGET="_top"
->Web browser</A
->.
-  But there are areas where configuration is done using a 
-  <A
-HREF="http://en.wikipedia.org/wiki/Text_editors";
-TARGET="_top"
->text editor</A
->
-  to edit configuration files. Also note that the web-based action editor
-  doesn't use authentication and should only be enabled in environments
-  where all clients with access to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> listening port can be trusted.
-  </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="PROXYMORON"
->1.3. What is a <SPAN
-CLASS="QUOTE"
->"proxy"</SPAN
->? How does
-Privoxy work?</A
-></H3
-><P
->  A <A
-HREF="http://en.wikipedia.org/wiki/Proxy_server";
-TARGET="_top"
->web proxy</A
->
-  is a service, based on a software such as <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, that clients
-  (i.e. browsers) can use instead of connecting to web servers directly.
-  The clients then ask the proxy to request objects (web pages, images, movies etc)
-  on their behalf and to forward the data to the clients.
-  It is a <SPAN
-CLASS="QUOTE"
->"go-between"</SPAN
->. For details, see
-  <A
-HREF="http://en.wikipedia.org/wiki/Proxy_server";
-TARGET="_top"
->Wikipedia's proxy definition</A
->.
- </P
-><P
->  There are many reasons to use web proxies, such as security (firewalling),
-  efficiency (caching) and others, and there are any number of proxies
-  to accommodate those needs.
- </P
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is a proxy that is primarily focused on
-  privacy enhancement, ad and junk elimination and freeing the user from
-  restrictions placed on his activities. Sitting between your browser(s) and the Internet,
-  it is in a perfect position to filter outbound personal information that your
-  browser is leaking, as well as inbound junk. It uses a variety of techniques to do
-  this, all of which are under your complete control via the various configuration
-  files and options. Being a proxy also makes it easier to share
-  configurations among multiple browsers and/or users.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="OTHERSTUFF"
->1.4. Does Privoxy do anything more than ad blocking?</A
-></H3
-><P
-> 
-  Yes, ad blocking is but one possible use. There are many, many ways <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
-  can be used to sanitize and customize web browsing. </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NEWJB"
->1.5. What is this new version of 
-<SPAN
-CLASS="QUOTE"
->"Junkbuster"</SPAN
->?</A
-></H3
-><P
-> A long time ago, there was the
- <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
-><SPAN
-CLASS="APPLICATION"
->Internet Junkbuster</SPAN
-></A
->, 
- by Anonymous Coders and <A
-HREF="http://www.junkbusters.com/";
-TARGET="_top"
->Junkbusters
- Corporation</A
->. This saved many users a lot of pain in the early days of
- web advertising and user tracking.</P
-><P
-> But the web, its protocols and standards, and with it, the techniques for
- forcing ads on users, give up autonomy over their browsing, and
- for tracking them, keeps evolving. Unfortunately, the <SPAN
-CLASS="APPLICATION"
->Internet
- Junkbuster</SPAN
-> did not. Version 2.0.2, published in 1998, was 
- (and is) the last official
- <A
-HREF="http://www.junkbusters.com/ijbdist.html#release";
-TARGET="_top"
->release</A
->
- available from <A
-HREF="http://www.junkbusters.com";
-TARGET="_top"
->Junkbusters Corporation</A
->.
- Fortunately, it had been released under the GNU
- <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
->GPL</A
->,
- which allowed further development by others.</P
-><P
-> So Stefan Waldherr started maintaining an improved version of the
- software, to which eventually a number of people contributed patches.
- It could already replace banners with a transparent image, and had a first
- version of pop-up killing, but it was still very closely based on the
- original, with all its limitations, such as the lack of HTTP/1.1 support,
- flexible per-site configuration, or content modification. The last release
- from this effort was version 2.0.2-10, published in 2000.</P
-><P
-> Then, some
- <A
-HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS";
-TARGET="_top"
->developers</A
->
- picked up the thread, and started turning the software inside out, upside down,
- and then reassembled it, adding many
- <A
-HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES";
-TARGET="_top"
->new
- features</A
-> along the way.</P
-><P
-> The result of this is <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, whose first
- stable version, 3.0, was released August, 2002. 
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN78"
->1.6. Why <SPAN
-CLASS="QUOTE"
->"Privoxy"</SPAN
->? Why change the name from
-Junkbuster at all?</A
-></H3
-><P
-> Though outdated, <A
-HREF="http://junkbusters.com/";
-TARGET="_top"
->Junkbusters Corporation</A
->
- continues to offer their original version of the <SPAN
-CLASS="APPLICATION"
->Internet
- Junkbuster</SPAN
->, so publishing our
- <SPAN
-CLASS="APPLICATION"
-> Junkbuster</SPAN
->-derived software under the same name
- led to confusion.</P
-><P
-> There are also potential legal complications from our use of the 
- <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
-> name, which is a registered trademark of 
- <A
-HREF="http://junkbusters.com/";
-TARGET="_top"
->Junkbusters Corporation</A
->.
- There are, however, no objections from Junkbusters Corporation to the 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> project itself, and they, in fact, still
- share our ideals and goals.</P
-><P
-> The developers also believed that there are so many improvements over the original 
- code, that it was time to make a clean break from the past and make 
- a name in their own right.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is the 
- <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Privacy Enhancing Proxy</I
-></SPAN
->"</SPAN
->. Also, its content
- modification and junk suppression gives <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->you</I
-></SPAN
->, the user, more
- control, more freedom, and allows you to browse your personal and
- <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->private</I
-></SPAN
-> edition"</SPAN
-> of the web.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DIFFERS"
->1.7. How does Privoxy differ
-from the old Junkbuster?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> picks up where
- <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
-> left off.
- The new <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> still blocks ads and banners,
- still manages <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
->, and still
- helps protect your privacy. But, most of these features have been enhanced,
- and many new ones have been added, all in the same vein.
- </P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s new features include:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->     Can keep outgoing connections alive and reuse them later on.
-  </P
-></LI
-><LI
-><P
->     Supports tagging which allows to change the behaviour
-     based on client and server headers.
-  </P
-></LI
-><LI
-><P
->     Can be run as an "intercepting" proxy, which obviates the need to
-     configure browsers individually.
-  </P
-></LI
-><LI
-><P
->     Sophisticated actions and filters for manipulating both server and client
-     headers. 
-   </P
-></LI
-><LI
-><P
->     Can be chained with other proxies.
-  </P
-></LI
-><LI
-><P
->   Integrated browser based configuration and control utility at <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
-   (shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->). Browser-based
-   tracing of rule and filter effects. Remote toggling.
-  </P
-></LI
-><LI
-><P
->   Web page filtering (text replacements, removes banners based on size,
-   invisible <SPAN
-CLASS="QUOTE"
->"web-bugs"</SPAN
->, JavaScript and HTML annoyances, 
-   pop-up windows, etc.)
-  </P
-></LI
-><LI
-><P
->   Modularized configuration that allows for standard settings and
-   user settings to reside in separate files, so that installing updated
-   actions files won't overwrite individual user settings.
-  </P
-></LI
-><LI
-><P
->   Support for Perl Compatible Regular Expressions in the configuration files, and 
-   a more sophisticated and flexible configuration syntax.
-  </P
-></LI
-><LI
-><P
->   Improved cookie management features (e.g. session based cookies).
-  </P
-></LI
-><LI
-><P
->   GIF de-animation. 
-  </P
-></LI
-><LI
-><P
->   Bypass many click-tracking scripts (avoids script redirection).
-  </P
-></LI
-><LI
-><P
->   Multi-threaded (POSIX and native threads).
-  </P
-></LI
-><LI
-><P
->   User-customizable HTML templates for most proxy-generated pages (e.g. "blocked" page).
-  </P
-></LI
-><LI
-><P
->   Auto-detection and re-reading of config file changes.
-  </P
-></LI
-><LI
-><P
->   Improved signal handling, and a true daemon mode (Unix).
-  </P
-></LI
-><LI
-><P
->   Every feature now controllable on a per-site or per-location basis, configuration
-   more powerful and versatile over-all.
-  </P
-></LI
-><LI
-><P
->   Many smaller new features added, limitations and bugs removed.
-  </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WHATSANAD"
->1.8. How does Privoxy know what is
-an ad, and what is not?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s approach to blocking ads is twofold:</P
-><P
-> First, there are certain patterns in the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->locations</I
-></SPAN
-> (URLs)
- of banner images. This applies to both the path (you wouldn't guess how many
- web sites serve their banners from a directory called <SPAN
-CLASS="QUOTE"
->"banners"</SPAN
->!)
- and the host (blocking the big banner hosting services like doublecklick.net
- already helps a lot). <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> takes advantage of this
- fact by using <A
-HREF="../user-manual/actions-file.html#AF-PATTERNS"
-TARGET="_top"
->URL
- patterns</A
-> to sort out and block the requests for things that sound 
- like they would be ads or banners.</P
-><P
-> Second, banners tend to come in certain <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->sizes</I
-></SPAN
->. But you
- can't tell the size of an image by its URL without downloading it, and if you
- do, it's too late to save bandwidth. Therefore, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- also inspects the HTML sources of web pages while they are loaded, and replaces
- references to images with standard banner sizes by dummy references, so that
- your browser doesn't request them anymore in the first place.</P
-><P
-> Both of this involves a certain amount of guesswork and is, of course, freely
- and readily configurable.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN160"
->1.9. Can Privoxy make mistakes? 
-This does not sound very scientific.</A
-></H3
-><P
-> Actually, it's a black art ;-) And yes, it is always possible to have a broad
- rule accidentally block or change something by mistake. You will almost surely
- run into such situations at some point. It is tricky writing rules to
- cover every conceivable possibility, and not occasionally get false positives.</P
-><P
-> But this should not be a big concern since the
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> configuration is very flexible, and
- includes tools to help identify these types of situations so they can be
- addressed as needed, allowing you to customize your installation.
- (<A
-HREF="trouble.html#BADSITE"
->See the Troubleshooting section below</A
->.)</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN166"
->1.10. Will I have to configure Privoxy
- before I can use it?</A
-></H3
-><P
-> That depends on your expectations.
- The default installation should give you a good starting
- point, and block <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->most</I
-></SPAN
-> ads and unwanted content,
- but many of the more advanced features are off by default, and require
- you to activate them. </P
-><P
-> You do have to set up your browser to use
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> (see the <A
-HREF="installation.html#FIRSTSTEP"
->Installation section below</A
->). </P
-><P
-> And you will certainly run into situations where there are false positives,
- or ads not being blocked that you may not want to see. In these cases, you
- would certainly benefit by customizing <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
- configuration to more closely match your individual situation. And we
- encourage you to do this. This is where the real power of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> lies!</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="LAN"
->1.11. Can Privoxy run as a server on a network?</A
-></H3
-><P
-> 
-  Yes, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> runs as a server already, and can easily be configured to
-  <SPAN
-CLASS="QUOTE"
->"serve"</SPAN
-> more than one client. See <A
-HREF="configuration.html#LANCONFIG"
->  How can I set up Privoxy to act as a proxy for my LAN</A
-> below.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="BROWSERS2"
->1.12. My browser does the same things as
-Privoxy. Why should I use Privoxy at all?</A
-></H3
-><P
->  Modern browsers do indeed have <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->some</I
-></SPAN
-> of the same
-  functionality as <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. Maybe this is
-  adequate for you. But <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is very
-  versatile and powerful, and can probably do a number of things
-  your browser just can't.
- </P
-><P
->  In addition, a proxy is good choice if you use multiple browsers, or 
-  have a LAN with multiple computers since <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can run as a server  
-  application. This way all the configuration is in one place, and you don't
-  have to maintain a similar configuration for possibly many browsers or
-  users.
- </P
-><P
->  Note, however, that it's recommended to leverage both your browser's
-  and <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> privacy enhancing features
-  at the same time. While your browser probably lacks some features
-  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> offers, it should also be able to do some things more
-  reliable, for example restricting and suppressing JavaScript.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WHYTRUST"
->1.13. Why should I trust Privoxy?</A
-></H3
-><P
->  The most important reason is because you have access to
-  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->everything</I
-></SPAN
->, and you can control everything. You can
-  check every line of every configuration file yourself. You can check every
-  last bit of source code should you desire. And even if you can't read code, 
-  there should be some comfort in knowing that other people can, 
-  and do read it. You can build the software from scratch, if you want,
-  so that you know the executable is clean, and that it is
-  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->yours</I
-></SPAN
->. In fact, we encourage this level of scrutiny. It
-  is one reason we use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> ourselves.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="LICENSE"
->1.14. Is there is a license or fee? What about a 
-warranty? Registration?</A
-></H3
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is free software and licensed under the <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
->GNU General Public License (GPL) version 2</A
->.
-  It is free to use, copy, modify or distribute as you wish under the terms of this
-  license.  Please see the <A
-HREF="copyright.html"
->Copyright</A
-> section for more
-  information on the license and copyright. Or the <TT
-CLASS="FILENAME"
->LICENSE</TT
-> file 
-  that should be included.
- </P
-><P
->  There is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->no warranty</I
-></SPAN
-> of any kind, expressed, implied or otherwise.
-  That is something that would cost real money ;-) There is no registration either.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SPYWARE"
->1.15. Can Privoxy remove spyware? Adware? Viruses?</A
-></H3
-><P
-> No, at least not reliably enough to trust it. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is not designed to be
- a malware removal tool and the default configuration doesn't even try to
- filter out any malware.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> could help prevent contact from (known) sites that use such
- tactics with appropriate configuration rules, and thus could conceivably
- prevent contamination from such sites. However, keeping such a configuration
- up to date would require a lot of time and effort that would be better spend
- on keeping your software itself up to date so it doesn't have known
- vulnerabilities.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="OTHERADS"
->1.16. Can I use Privoxy with other ad-blocking software?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> should work fine with other proxies and other software in general.</P
-><P
-> But it is probably not necessary to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in conjunction with other
- ad-blocking products, and this could conceivably cause undesirable results.
- It might be better to choose one software or the other and work a little to
- tweak its configuration to your liking.</P
-><P
-> Note that this is an advice specific to ad blocking.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="JOINTEAM"
->1.17. I would like to help you, what can I do?</A
-></H3
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="JOINTEAM-WORK"
->1.17.1. Would you like to participate?</A
-></H4
-><P
->   Well, we <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->always</I
-></SPAN
-> need help. There is something for
-   everybody who wants to help us. We welcome new developers, packagers,
-   testers, documentation writers or really anyone with a desire to help in
-   any way. You <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->DO NOT</I
-></SPAN
-> need to be a
-   <SPAN
-CLASS="QUOTE"
->"programmer"</SPAN
->. There are many other tasks available. In fact,
-   the programmers often can't spend as much time programming because of some
-   of the other, more mundane things that need to be done, like checking the
-   Tracker feedback sections. 
- </P
-><P
->  So first thing, <A
-HREF="https://sourceforge.net/account/register.php";
-TARGET="_top"
->get an account on SourceForge.net</A
->
-   and mail your id to the <A
-HREF="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";
-TARGET="_top"
->developers
-   mailing list</A
->. Then, please read the <A
-HREF="../developer-manual/index.html"
-TARGET="_top"
->Developer's Manual</A
->, at least
-   the pertinent sections.</P
-><P
->  You can also start helping out without SourceForge.net account,
-  simply by showing up on the mailing list, helping out other users,
-  providing general feedback or reporting problems you noticed.
- </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="DONATE"
->1.17.2. Would you like to donate?</A
-></H4
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is developed by unpaid volunteers
- and thus our current running costs are pretty low. Nevertheless, we
- have plans that will cost money in the future. We would like to get
- this money through donations made by our users.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has therefore become an associated
- project of <A
-HREF="http://www.spi-inc.org/about-spi/about-spi";
-TARGET="_top"
->Software
- in the Public Interest (SPI)</A
->, which allows us to receive tax-deductible
- donations in most western countries.</P
-><P
-> We intend to use the donations to pay for our domain after transfering
- it to SPI. Our goal is to make sure there's no single point of failure
- and the bill gets paid and the site keeps running even if a some of
- the currently active developers were to suddenly disappear for a while.</P
-><P
-> We would also like to spend some money on more reliable hosting,
- on hardware to help make sure <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- keeps running on platforms the developers currently can't test on,
- and on technical books to educate our developers about said platforms
- or to improve their knowledge in general.</P
-><P
-> If you enjoy our software and feel like helping out with a donation,
- please have a look at
- <A
-HREF="http://www.spi-inc.org/donations";
-TARGET="_top"
->SPI's donation page</A
->
- to see what the options are.</P
-><P
-></P
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy Frequently Asked Questions</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Installation</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/index.html b/external/privoxy/doc/webserver/faq/index.html
deleted file mode 100644
index cec0d7c..0000000
--- a/external/privoxy/doc/webserver/faq/index.html
+++ /dev/null
@@ -1,999 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy Frequently Asked Questions</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="NEXT"
-TITLE="General Information"
-HREF="general.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="ARTICLE"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="ARTICLE"
-><DIV
-CLASS="TITLEPAGE"
-><H1
-CLASS="TITLE"
-><A
-NAME="AEN2"
->Privoxy Frequently Asked Questions</A
-></H1
-><P
-CLASS="PUBDATE"
-> <SUB
-> <A
-HREF="copyright.html"
->Copyright</A
-> © 2001-2009 by 
- <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->Privoxy Developers</A
->
- </SUB
-><BR></P
-><P
-CLASS="PUBDATE"
->$Id: index.html,v 1.51 2009/03/21 12:59:04 fabiankeil Exp $<BR></P
-><DIV
-><DIV
-CLASS="ABSTRACT"
-><P
-></P
-><A
-NAME="AEN9"
-></A
-><P
-> This FAQ gives quick answers to frequently asked questions about
- <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->Privoxy</A
->.
- It is not a substitute for the 
- <A
-HREF="../user-manual/index.html"
-TARGET="_top"
-><I
-CLASS="CITETITLE"
->Privoxy User Manual</I
-></A
->.
- 
- </P
-><P
->What is Privoxy?</P
-><P
-> Privoxy is a non-caching web proxy with advanced filtering capabilities
- for enhancing privacy, modifying web page data and HTTP headers, controlling
- access, and removing ads and other obnoxious Internet junk. Privoxy has a
- flexible configuration and can be customized to suit individual needs and tastes.
- It has application for both stand-alone systems and multi-user networks.</P
-><P
-> Privoxy is Free Software and licensed under the GPL2.</P
-><P
-> Privoxy is an associated project of Software in the Public Interest (SPI).
- <A
-HREF="http://www.privoxy.org/faq/general.html#DONATE";
-TARGET="_top"
->Donations are welcome</A
->.</P
-><P
->  Please note that this document is a work in progress. This copy represents
-  the state at the release of version 3.0.12.
-  You can find the latest version of the document at <A
-HREF="http://www.privoxy.org/faq/";
-TARGET="_top"
->http://www.privoxy.org/faq/</A
->.
-  Please see the <A
-HREF="contact.html"
->Contact section</A
-> if you want to
-  contact the developers. 
- </P
-><P
-></P
-></DIV
-></DIV
-><HR></DIV
-><DIV
-CLASS="TOC"
-><DL
-><DT
-><B
->Table of Contents</B
-></DT
-><DT
->1. <A
-HREF="general.html"
->General Information</A
-></DT
-><DD
-><DL
-><DT
->1.1. <A
-HREF="general.html#WHO-USES"
->Who should give <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> a try?</A
-></DT
-><DT
->1.2. <A
-HREF="general.html#BESTCHOICE"
->Is Privoxy the best choice for
-me?</A
-></DT
-><DT
->1.3. <A
-HREF="general.html#PROXYMORON"
->What is a <SPAN
-CLASS="QUOTE"
->"proxy"</SPAN
->? How does
-Privoxy work?</A
-></DT
-><DT
->1.4. <A
-HREF="general.html#OTHERSTUFF"
->Does Privoxy do anything more than ad blocking?</A
-></DT
-><DT
->1.5. <A
-HREF="general.html#NEWJB"
->What is this new version of 
-<SPAN
-CLASS="QUOTE"
->"Junkbuster"</SPAN
->?</A
-></DT
-><DT
->1.6. <A
-HREF="general.html#AEN78"
->Why <SPAN
-CLASS="QUOTE"
->"Privoxy"</SPAN
->? Why change the name from
-Junkbuster at all?</A
-></DT
-><DT
->1.7. <A
-HREF="general.html#DIFFERS"
->How does Privoxy differ
-from the old Junkbuster?</A
-></DT
-><DT
->1.8. <A
-HREF="general.html#WHATSANAD"
->How does Privoxy know what is
-an ad, and what is not?</A
-></DT
-><DT
->1.9. <A
-HREF="general.html#AEN160"
->Can Privoxy make mistakes? 
-This does not sound very scientific.</A
-></DT
-><DT
->1.10. <A
-HREF="general.html#AEN166"
->Will I have to configure Privoxy
- before I can use it?</A
-></DT
-><DT
->1.11. <A
-HREF="general.html#LAN"
->Can Privoxy run as a server on a network?</A
-></DT
-><DT
->1.12. <A
-HREF="general.html#BROWSERS2"
->My browser does the same things as
-Privoxy. Why should I use Privoxy at all?</A
-></DT
-><DT
->1.13. <A
-HREF="general.html#WHYTRUST"
->Why should I trust Privoxy?</A
-></DT
-><DT
->1.14. <A
-HREF="general.html#LICENSE"
->Is there is a license or fee? What about a 
-warranty? Registration?</A
-></DT
-><DT
->1.15. <A
-HREF="general.html#SPYWARE"
->Can Privoxy remove spyware? Adware? Viruses?</A
-></DT
-><DT
->1.16. <A
-HREF="general.html#OTHERADS"
->Can I use Privoxy with other ad-blocking software?</A
-></DT
-><DT
->1.17. <A
-HREF="general.html#JOINTEAM"
->I would like to help you, what can I do?</A
-></DT
-><DD
-><DL
-><DT
->1.17.1. <A
-HREF="general.html#JOINTEAM-WORK"
->Would you like to participate?</A
-></DT
-><DT
->1.17.2. <A
-HREF="general.html#DONATE"
->Would you like to donate?</A
-></DT
-></DL
-></DD
-></DL
-></DD
-><DT
->2. <A
-HREF="installation.html"
->Installation</A
-></DT
-><DD
-><DL
-><DT
->2.1. <A
-HREF="installation.html#WHICHBROWSERS"
->Which browsers are supported by Privoxy?</A
-></DT
-><DT
->2.2. <A
-HREF="installation.html#WHICHOS"
->Which operating systems are supported?</A
-></DT
-><DT
->2.3. <A
-HREF="installation.html#EMAIL-CLIENT"
->Can I use Privoxy with my email client?</A
-></DT
-><DT
->2.4. <A
-HREF="installation.html#FIRSTSTEP"
->I just installed Privoxy. Is there anything 
-special I have to do now?</A
-></DT
-><DT
->2.5. <A
-HREF="installation.html#LOCALHOST"
->What is the proxy address of Privoxy?</A
-></DT
-><DT
->2.6. <A
-HREF="installation.html#NOTHING"
->I just installed Privoxy, and nothing is happening.
-All the ads are there. What's wrong?</A
-></DT
-><DT
->2.7. <A
-HREF="installation.html#NOTUSED"
->I get a <SPAN
-CLASS="QUOTE"
->"Privoxy is not being used"</SPAN
-> dummy page although
-Privoxy is running and being used.</A
-></DT
-></DL
-></DD
-><DT
->3. <A
-HREF="configuration.html"
->Configuration</A
-></DT
-><DD
-><DL
-><DT
->3.1. <A
-HREF="configuration.html#AEN354"
->What exactly is an <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> file?</A
-></DT
-><DT
->3.2. <A
-HREF="configuration.html#ACTIONSS"
->The <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> concept confuses me. Please list 
-some of these <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
->.</A
-></DT
-><DT
->3.3. <A
-HREF="configuration.html#AEN377"
->How are actions files configured? What is the easiest
-way to do this?</A
-></DT
-><DT
->3.4. <A
-HREF="configuration.html#AEN386"
->There are several different <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> files. What are
-the differences?</A
-></DT
-><DT
->3.5. <A
-HREF="configuration.html#GETUPDATES"
->Where can I get updated Actions Files?</A
-></DT
-><DT
->3.6. <A
-HREF="configuration.html#NEWCONFIG"
->Can I use my old config files?</A
-></DT
-><DT
->3.7. <A
-HREF="configuration.html#DIFFICULT"
->Why is the configuration so complicated?</A
-></DT
-><DT
->3.8. <A
-HREF="configuration.html#YAHOO"
->How can I make my Yahoo/Hotmail/Gmail account work?</A
-></DT
-><DT
->3.9. <A
-HREF="configuration.html#CONFIGFILES"
->What's the difference between the
-<SPAN
-CLASS="QUOTE"
->"Cautious"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"Medium"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
-> defaults?</A
-></DT
-><DT
->3.10. <A
-HREF="configuration.html#BROWSECONFIG"
->Why can I change the configuration 
-with a browser? Does that not raise security issues?</A
-></DT
-><DT
->3.11. <A
-HREF="configuration.html#AEN481"
->What is the <TT
-CLASS="FILENAME"
->default.filter</TT
-> file? What is a <SPAN
-CLASS="QUOTE"
->"filter"</SPAN
->?</A
-></DT
-><DT
->3.12. <A
-HREF="configuration.html#LANCONFIG"
->How can I set up Privoxy to act as a proxy for my 
- LAN?</A
-></DT
-><DT
->3.13. <A
-HREF="configuration.html#AEN532"
->Instead of ads, now I get a checkerboard pattern. I don't want to see anything.</A
-></DT
-><DT
->3.14. <A
-HREF="configuration.html#AEN549"
->Why would anybody want to see a checkerboard pattern?</A
-></DT
-><DT
->3.15. <A
-HREF="configuration.html#AEN555"
->I see some images being replaced with text
-instead of the checkerboard image. Why and how do I get rid of this?</A
-></DT
-><DT
->3.16. <A
-HREF="configuration.html#SRVANY"
->Can Privoxy run as a service 
-on Win2K/NT/XP?</A
-></DT
-><DT
->3.17. <A
-HREF="configuration.html#OTHERPROXY"
->How can I make Privoxy work with other 
-proxies like Squid or Tor?</A
-></DT
-><DT
->3.18. <A
-HREF="configuration.html#PORT-80"
->Can I just set Privoxy to use port 80
-and thus avoid individual browser configuration?</A
-></DT
-><DT
->3.19. <A
-HREF="configuration.html#TRANSPARENT"
->Can Privoxy run as a <SPAN
-CLASS="QUOTE"
->"transparent"</SPAN
-> proxy?</A
-></DT
-><DT
->3.20. <A
-HREF="configuration.html#INTERCEPTING"
->Can Privoxy run as a <SPAN
-CLASS="QUOTE"
->"intercepting"</SPAN
-> proxy?</A
-></DT
-><DT
->3.21. <A
-HREF="configuration.html#OUTLOOK"
->How can I configure Privoxy for use with Outlook?</A
-></DT
-><DT
->3.22. <A
-HREF="configuration.html#OUTLOOK-MORE"
->How can I have separate rules just for HTML mail?</A
-></DT
-><DT
->3.23. <A
-HREF="configuration.html#SNEAKY-COOKIES"
->I sometimes notice cookies sneaking through. How?</A
-></DT
-><DT
->3.24. <A
-HREF="configuration.html#EVIL-COOKIES"
->Are all cookies bad? Why?</A
-></DT
-><DT
->3.25. <A
-HREF="configuration.html#ALLOW-COOKIES"
->How can I allow permanent cookies for my trusted sites?</A
-></DT
-><DT
->3.26. <A
-HREF="configuration.html#MULTIPLES"
->Can I have separate configurations for different users?</A
-></DT
-><DT
->3.27. <A
-HREF="configuration.html#WHITELISTS"
->Can I set-up Privoxy as a whitelist of
-<SPAN
-CLASS="QUOTE"
->"good"</SPAN
-> sites?</A
-></DT
-><DT
->3.28. <A
-HREF="configuration.html#NO-ADBLOCK"
->How can I turn off ad-blocking?</A
-></DT
-><DT
->3.29. <A
-HREF="configuration.html#TEMPLATES"
->How can I have custom template pages, like the 
-<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->BLOCKED</I
-></SPAN
-> page?</A
-></DT
-><DT
->3.30. <A
-HREF="configuration.html#BLOCKALL"
->How can I remove the <SPAN
-CLASS="QUOTE"
->"Go There Anyway"</SPAN
-> link from 
-the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->BLOCKED</I
-></SPAN
-> page?</A
-></DT
-></DL
-></DD
-><DT
->4. <A
-HREF="misc.html"
->Miscellaneous</A
-></DT
-><DD
-><DL
-><DT
->4.1. <A
-HREF="misc.html#AEN729"
->How much does Privoxy slow my browsing down? This 
-has to add extra time to browsing.</A
-></DT
-><DT
->4.2. <A
-HREF="misc.html#LOADINGTIMES"
->I notice considerable
-delays in page requests. What's wrong?</A
-></DT
-><DT
->4.3. <A
-HREF="misc.html#CONFIGURL"
->What are "http://config.privoxy.org/"; and
-"http://p.p/";?</A
-></DT
-><DT
->4.4. <A
-HREF="misc.html#NEWADS"
->How can I submit new ads, or report
-problems?</A
-></DT
-><DT
->4.5. <A
-HREF="misc.html#NEWADS2"
->If I do submit missed ads, will 
-they be included in future updates?</A
-></DT
-><DT
->4.6. <A
-HREF="misc.html#NOONECARES"
->Why doesn't anyone answer my support 
-request?</A
-></DT
-><DT
->4.7. <A
-HREF="misc.html#IP"
->How can I hide my IP address?</A
-></DT
-><DT
->4.8. <A
-HREF="misc.html#AEN794"
->Can Privoxy guarantee I am anonymous?</A
-></DT
-><DT
->4.9. <A
-HREF="misc.html#AEN812"
->A test site says I am not using a Proxy.</A
-></DT
-><DT
->4.10. <A
-HREF="misc.html#TOR"
->How do I use Privoxy
- together with Tor?</A
-></DT
-><DT
->4.11. <A
-HREF="misc.html#AEN868"
->Might some things break because header information or
-content is being altered?</A
-></DT
-><DT
->4.12. <A
-HREF="misc.html#AEN882"
->Can Privoxy act as a <SPAN
-CLASS="QUOTE"
->"caching"</SPAN
-> proxy to 
-speed up web browsing?</A
-></DT
-><DT
->4.13. <A
-HREF="misc.html#AEN892"
->What about as a firewall? Can Privoxy protect me?</A
-></DT
-><DT
->4.14. <A
-HREF="misc.html#AEN897"
->I have large empty spaces / a checkerboard pattern now where
-ads used to be. Why?</A
-></DT
-><DT
->4.15. <A
-HREF="misc.html#AEN905"
->How can Privoxy filter Secure (HTTPS) URLs?</A
-></DT
-><DT
->4.16. <A
-HREF="misc.html#AEN919"
->Privoxy runs as a <SPAN
-CLASS="QUOTE"
->"server"</SPAN
->. How 
-secure is it? Do I need to take any special precautions?</A
-></DT
-><DT
->4.17. <A
-HREF="misc.html#TURNOFF"
->Can I temporarily disable Privoxy?</A
-></DT
-><DT
->4.18. <A
-HREF="misc.html#REALLYOFF"
->When <SPAN
-CLASS="QUOTE"
->"disabled"</SPAN
-> is Privoxy totally 
-out of the picture?</A
-></DT
-><DT
->4.19. <A
-HREF="misc.html#TURNOFF2"
->How can I tell Privoxy to totally ignore certain sites?</A
-></DT
-><DT
->4.20. <A
-HREF="misc.html#CRUNCH"
->My logs show Privoxy <SPAN
-CLASS="QUOTE"
->"crunches"</SPAN
-> 
-ads, but also its own internal CGI pages. What is a <SPAN
-CLASS="QUOTE"
->"crunch"</SPAN
->?</A
-></DT
-><DT
->4.21. <A
-HREF="misc.html#DOWNLOADS"
->Can Privoxy effect files that I download
-from a webserver? FTP server?</A
-></DT
-><DT
->4.22. <A
-HREF="misc.html#DOWNLOADS2"
->I just downloaded a Perl script, and Privoxy
-altered it! Yikes, what is wrong!</A
-></DT
-><DT
->4.23. <A
-HREF="misc.html#HOSTSFILE"
->Should I continue to use a <SPAN
-CLASS="QUOTE"
->"HOSTS"</SPAN
-> file for ad-blocking?</A
-></DT
-><DT
->4.24. <A
-HREF="misc.html#SEEALSO"
->Where can I find more information about Privoxy
-and related issues?</A
-></DT
-><DT
->4.25. <A
-HREF="misc.html#MICROSUCK"
->I've noticed that Privoxy changes <SPAN
-CLASS="QUOTE"
->"Microsoft"</SPAN
-> to 
-<SPAN
-CLASS="QUOTE"
->"MicroSuck"</SPAN
->! Why are you manipulating my browsing?</A
-></DT
-><DT
->4.26. <A
-HREF="misc.html#VALID"
->Does Privoxy produce <SPAN
-CLASS="QUOTE"
->"valid"</SPAN
-> HTML (or XHTML)?</A
-></DT
-></DL
-></DD
-><DT
->5. <A
-HREF="trouble.html"
->Troubleshooting</A
-></DT
-><DD
-><DL
-><DT
->5.1. <A
-HREF="trouble.html#AEN1084"
->I cannot connect to any websites. Or, I am getting
-<SPAN
-CLASS="QUOTE"
->"connection refused"</SPAN
-> message with every web page. Why?</A
-></DT
-><DT
->5.2. <A
-HREF="trouble.html#ERROR503"
->Why am I getting a 503 Error (WSAECONNREFUSED) on every page?</A
-></DT
-><DT
->5.3. <A
-HREF="trouble.html#AEN1107"
->I just added a new rule, but the steenkin ad is 
-still getting through. How?</A
-></DT
-><DT
->5.4. <A
-HREF="trouble.html#BADSITE"
->One of my favorite sites does not work with Privoxy.
-What can I do?</A
-></DT
-><DT
->5.5. <A
-HREF="trouble.html#DUN"
->After installing Privoxy, I have to log in
-every time I start IE. What gives?</A
-></DT
-><DT
->5.6. <A
-HREF="trouble.html#FTP"
->I cannot connect to any FTP sites. Privoxy
- is blocking me.</A
-></DT
-><DT
->5.7. <A
-HREF="trouble.html#MACOSXIE"
->In Mac OS X, I can't configure Microsoft Internet Explorer to use 
- Privoxy as the HTTP proxy.</A
-></DT
-><DT
->5.8. <A
-HREF="trouble.html#MACOSXUNINSTALL"
->In Mac OS X, I dragged the Privoxy folder to the trash in order to 
- uninstall it. Now the finder tells me I don't have sufficient privileges to
- empty the trash.</A
-></DT
-><DT
->5.9. <A
-HREF="trouble.html#MACOSXIMAGES"
->In Mac OS X Panther (10.3), images often fail to load and/or I
- experience random delays in page loading. I'm using
- <TT
-CLASS="LITERAL"
->localhost</TT
-> as my browser's proxy setting.</A
-></DT
-><DT
->5.10. <A
-HREF="trouble.html#BLANKPAGE"
->I get a completely blank page at one site. <SPAN
-CLASS="QUOTE"
->"View Source"</SPAN
->
- shows only: <SPAN
-CLASS="MARKUP"
->&#60;html&#62;&#60;body&#62;&#60;/body&#62;&#60;/html&#62;</SPAN
->. Without
- Privoxy the page loads fine.</A
-></DT
-><DT
->5.11. <A
-HREF="trouble.html#NOHOSTNAME"
->My logs show many <SPAN
-CLASS="QUOTE"
->"Unable to get my own hostname"</SPAN
-> lines.
-Why?</A
-></DT
-><DT
->5.12. <A
-HREF="trouble.html#INUSE"
->When I try to launch Privoxy, I get an 
-error message <SPAN
-CLASS="QUOTE"
->"port 8118 is already in use"</SPAN
-> (or similar wording).
-Why?</A
-></DT
-><DT
->5.13. <A
-HREF="trouble.html#DEMORONIZER"
->Pages with UTF-8 fonts are garbled.</A
-></DT
-><DT
->5.14. <A
-HREF="trouble.html#DEMORONIZER2"
->Why are binary files (such as images) corrupted when Privoxy
- is used?</A
-></DT
-><DT
->5.15. <A
-HREF="trouble.html#DEMORONIZER3"
->What is the <SPAN
-CLASS="QUOTE"
->"demoronizer"</SPAN
-> and why is it there?</A
-></DT
-><DT
->5.16. <A
-HREF="trouble.html#WINDOWOPEN"
->Why do I keep seeing <SPAN
-CLASS="QUOTE"
->"PrivoxyWindowOpen()"</SPAN
-> in raw source code?</A
-></DT
-><DT
->5.17. <A
-HREF="trouble.html#DNSERRORS"
->I am getting too many DNS errors like <SPAN
-CLASS="QUOTE"
->"404 No Such Domain"</SPAN
->. Why
- can't Privoxy do this better?</A
-></DT
-><DT
->5.18. <A
-HREF="trouble.html#ALLCPU"
->At one site Privoxy just hangs, and starts taking 
- all CPU. Why is this?</A
-></DT
-><DT
->5.19. <A
-HREF="trouble.html#SLOWCRAWL"
->I just installed Privoxy, and all my
-browsing has slowed to a crawl. What gives?</A
-></DT
-><DT
->5.20. <A
-HREF="trouble.html#PREVENTCOMP"
->Why do my filters work on some sites but not on others?</A
-></DT
-><DT
->5.21. <A
-HREF="trouble.html#SSL-WARNINGS"
->On some HTTPS sites my browser warns me about unauthenticated content,
- the URL bar doesn't get highlighted and the lock symbol appears to be broken.
- What's going on?</A
-></DT
-><DT
->5.22. <A
-HREF="trouble.html#SE-LINUX"
->I get selinux error messages. How can I fix this?</A
-></DT
-><DT
->5.23. <A
-HREF="trouble.html#GENTOO-RICERS"
->I compiled <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with Gentoo's portage and it appears to be very slow. Why?</A
-></DT
-></DL
-></DD
-><DT
->6. <A
-HREF="contact.html"
->Contacting the developers, Bug Reporting and Feature Requests</A
-></DT
-><DD
-><DL
-><DT
->6.1. <A
-HREF="contact.html#CONTACT-SUPPORT"
->Get Support</A
-></DT
-><DT
->6.2. <A
-HREF="contact.html#REPORTING"
->Reporting Problems</A
-></DT
-><DD
-><DL
-><DT
->6.2.1. <A
-HREF="contact.html#CONTACT-ADS"
->Reporting Ads or Other Configuration Problems</A
-></DT
-><DT
->6.2.2. <A
-HREF="contact.html#CONTACT-BUGS"
->Reporting Bugs</A
-></DT
-></DL
-></DD
-><DT
->6.3. <A
-HREF="contact.html#CONTACT-FEATURE"
->Request New Features</A
-></DT
-><DT
->6.4. <A
-HREF="contact.html#CONTACT-OTHER"
->Other</A
-></DT
-></DL
-></DD
-><DT
->7. <A
-HREF="copyright.html"
->Privoxy Copyright, License and History</A
-></DT
-><DD
-><DL
-><DT
->7.1. <A
-HREF="copyright.html#AEN1451"
->License</A
-></DT
-><DT
->7.2. <A
-HREF="copyright.html#AEN1467"
->History</A
-></DT
-></DL
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="general.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->General Information</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/installation.html b/external/privoxy/doc/webserver/faq/installation.html
deleted file mode 100644
index 1e99b30..0000000
--- a/external/privoxy/doc/webserver/faq/installation.html
+++ /dev/null
@@ -1,569 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Installation</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="General Information"
-HREF="general.html"><LINK
-REL="NEXT"
-TITLE="Configuration"
-HREF="configuration.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="general.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="configuration.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="INSTALLATION"
->2. Installation</A
-></H1
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WHICHBROWSERS"
->2.1. Which browsers are supported by Privoxy?</A
-></H3
-><P
-> Any browser that can be configured to use a proxy, which 
- should be virtually all browsers, including
- <SPAN
-CLASS="APPLICATION"
->Firefox</SPAN
->, <SPAN
-CLASS="APPLICATION"
->Internet
- Explorer</SPAN
->, <SPAN
-CLASS="APPLICATION"
->Opera</SPAN
->, and 
- <SPAN
-CLASS="APPLICATION"
->Safari</SPAN
-> among others.
- Direct browser support is not an absolute requirement since
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> runs as a separate application and talks
- to the browser in the standardized HTTP protocol, just like a web server
- does.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WHICHOS"
->2.2. Which operating systems are supported?</A
-></H3
-><P
-> At present, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is known to run on
- Windows(95, 98, ME, 2000, XP, Vista), GNU/Linux (RedHat, SuSE, Debian,
- Fedora, Gentoo, Slackware and others), Mac OSX, OS/2, AmigaOS, FreeBSD,
- NetBSD, OpenBSD, Solaris, and various other flavors of Unix.</P
-><P
-> But any operating system that runs TCP/IP, can conceivably take advantage of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in a networked situation where
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> would run as a server on a LAN gateway. 
- Then only the <SPAN
-CLASS="QUOTE"
->"gateway"</SPAN
-> needs to be running one of the above
- operating systems.</P
-><P
-> Source code is freely available, so porting to other operating systems 
- is always a possibility.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="EMAIL-CLIENT"
->2.3. Can I use Privoxy with my email client?</A
-></H3
-><P
-> As long as there is some way to set a HTTP proxy for the client, then yes,
- any application can be used, whether it is strictly speaking a
- <SPAN
-CLASS="QUOTE"
->"browser"</SPAN
-> or not. Though this may not be the best approach for
- dealing with some of the common abuses of HTML in email. See <A
-HREF="configuration.html#OUTLOOK"
->How can I configure <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- with <SPAN
-CLASS="APPLICATION"
->Outlook</SPAN
->?</A
-> below for more on
- this. </P
-><P
-> Be aware that HTML email presents a number of unique security and privacy
- related issues, that can require advanced skills to overcome. The developers
- recommend using email clients that can be configured to convert HTML to plain
- text for these reasons.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="FIRSTSTEP"
->2.4. I just installed Privoxy. Is there anything 
-special I have to do now?</A
-></H3
-><P
-> All browsers should be told to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
- as a proxy by specifying the correct proxy address and port number 
- in the appropriate configuration area for the browser. It's possible
- to combine <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with a packet filter to intercept HTTP requests
- even if the client isn't explicitly configured to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->,
- but where possible, configuring the client is recommended. See 
- <A
-HREF="../user-manual/startup.html"
-TARGET="_top"
->the User Manual for more
- details</A
->. You should also flush your browser's memory and disk
- cache to get rid of any cached junk items, and remove any stored 
- <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
->.&#13;</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="LOCALHOST"
->2.5. What is the proxy address of Privoxy?</A
-></H3
-><P
->  If you set up the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to run on
-  the computer you browse from (rather than your ISP's server or some
-  networked computer on a LAN), the proxy will be on <TT
-CLASS="LITERAL"
->127.0.0.1</TT
-> 
-  (sometimes referred to as <SPAN
-CLASS="QUOTE"
->"localhost"</SPAN
->,
-  which is the special name used by every computer on the Internet to refer
-  to itself) and the port will be 8118 (unless you used the <A
-HREF="../user-manual/config.html#LISTEN-ADDRESS"
-TARGET="_top"
->listen-address</A
->
-  config option to tell <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to run on
-  a different port).
- </P
-><P
->  When configuring your browser's proxy settings you typically enter
-  the word <SPAN
-CLASS="QUOTE"
->"localhost"</SPAN
-> or the IP address <SPAN
-CLASS="QUOTE"
->"127.0.0.1"</SPAN
->
-  in the boxes next to <SPAN
-CLASS="QUOTE"
->"HTTP"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"Secure"</SPAN
-> (HTTPS) and
-  then the number <SPAN
-CLASS="QUOTE"
->"8118"</SPAN
-> for <SPAN
-CLASS="QUOTE"
->"port"</SPAN
->. 
-  This tells your browser to send all web requests to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-  instead of directly to the Internet.
- </P
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can also be used to proxy for 
-  a Local Area Network. In this case, your would enter either the IP 
-  address of the LAN host where <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
-  is running, or the equivalent hostname, e.g. <TT
-CLASS="LITERAL"
->192.168.1.1</TT
->.
-  Port assignment would be same as above. Note that
-  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> doesn't listen on any LAN interfaces by
-  default.
- </P
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> does not currently handle
-  any other protocols such as FTP, SMTP, IM, IRC, ICQ, etc.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NOTHING"
->2.6. I just installed Privoxy, and nothing is happening.
-All the ads are there. What's wrong?</A
-></H3
-><P
-> Did you configure your browser to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
- as a proxy? It does not sound like it. See above. You might also try flushing
- the browser's caches to force a full re-reading of pages. You can verify 
- that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is running, and your browser 
- is correctly configured by entering the special URL: 
- <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->. 
- 
- This should take you to a page titled <SPAN
-CLASS="QUOTE"
->"This is Privoxy.."</SPAN
-> with
- access to <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> internal configuration.
- If you see this, then you are good to go. If you receive a page saying 
- <SPAN
-CLASS="QUOTE"
->"Privoxy is not running"</SPAN
->, then the browser is not set up to use
- your <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> installation.
- If you receive anything else (probably nothing at all), it could either
- be that the browser is not set up correctly, or that
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is not running at all. Check the <A
-HREF="../user-manual/config.html#LOGFILE"
-TARGET="_top"
->log file</A
->. For instructions
- on starting <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and browser configuration,
- see the <A
-HREF="http://www.privoxy.org/user-manual/startup.html";
-TARGET="_top"
->chapter
- on starting <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-></A
-> in the
- <A
-HREF="http://www.privoxy.org/user-manual/";
-TARGET="_top"
->User Manual</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NOTUSED"
->2.7. I get a <SPAN
-CLASS="QUOTE"
->"Privoxy is not being used"</SPAN
-> dummy page although
-Privoxy is running and being used.</A
-></H3
-><P
-> First, make sure that Privoxy is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->really</I
-></SPAN
-> running and
- being used by visiting <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->. You
- should see the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> main page. If not, see
- the <A
-HREF="http://www.privoxy.org/user-manual/startup.html";
-TARGET="_top"
->chapter
- on starting <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-></A
-> in the
- <A
-HREF="http://www.privoxy.org/user-manual/";
-TARGET="_top"
->User Manual</A
->.</P
-><P
-> Now if <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
-> works for you, but
- other parts of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s web interface show
- the dummy page, your browser has cached a redirection it encountered before
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> was being used. You need to clear your
- browser's cache. Note that shift-reloading the dummy page won't help, since
- that'll only refresh the dummy page, not the redirection that lead you there.</P
-><P
-> The procedure for clearing the cache varies from browser to browser. For
- example, <SPAN
-CLASS="APPLICATION"
->Mozilla/Netscape</SPAN
-> users would click 
- <SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
-> --&#62; <SPAN
-CLASS="GUIBUTTON"
->Preferences</SPAN
-> --&#62;
- <SPAN
-CLASS="GUIBUTTON"
->Advanced</SPAN
-> --&#62; <SPAN
-CLASS="GUIBUTTON"
->Cache</SPAN
-> and
- then click both <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Clear Memory Cache</SPAN
->"</SPAN
->
- and <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Clear Disk Cache</SPAN
->"</SPAN
->.
- In some <SPAN
-CLASS="APPLICATION"
->Firefox</SPAN
-> versions it's
- <SPAN
-CLASS="GUIBUTTON"
->Tools</SPAN
-> --&#62; <SPAN
-CLASS="GUIBUTTON"
->Options</SPAN
-> --&#62;
- <SPAN
-CLASS="GUIBUTTON"
->Privacy</SPAN
-> --&#62; <SPAN
-CLASS="GUIBUTTON"
->Cache</SPAN
-> and
- then click <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Clear Cache Now</SPAN
->"</SPAN
->.
- </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="general.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="configuration.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->General Information</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Configuration</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/misc.html b/external/privoxy/doc/webserver/faq/misc.html
deleted file mode 100644
index 174722e..0000000
--- a/external/privoxy/doc/webserver/faq/misc.html
+++ /dev/null
@@ -1,1745 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Miscellaneous</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Configuration"
-HREF="configuration.html"><LINK
-REL="NEXT"
-TITLE="Troubleshooting"
-HREF="trouble.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="configuration.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="trouble.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="MISC"
->4. Miscellaneous</A
-></H1
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN729"
->4.1. How much does Privoxy slow my browsing down? This 
-has to add extra time to browsing.</A
-></H3
-><P
-> How much of an impact depends on many things, including the CPU of the host
- system, how aggressive the configuration is, which specific actions are being triggered, 
- the size of the page, the bandwidth of the connection, etc.</P
-><P
-> Overall, it should not slow you down any in real terms, and may actually help 
- speed things up since ads, banners and other junk are not typically being
- retrieved and displayed. The actual processing time required by
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> itself for each page, is relatively small
- in the overall scheme of things, and happens very quickly. This is typically
- more than offset by time saved not downloading and rendering ad images and
- other junk content (if ad blocking is being used).</P
-><P
-> <SPAN
-CLASS="QUOTE"
->"Filtering"</SPAN
-> content via the <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#FILTER"
-TARGET="_top"
->filter</A
-></TT
-> or
- <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#DEANIMATE-GIFS"
-TARGET="_top"
->deanimate-gifs</A
-></TT
->
- actions may cause a perceived slowdown, since the entire document
- needs to be buffered before displaying. And on very large documents,
- filtering may have some measurable impact. How much depends on the page size,
- the actual definition of the filter(s), etc. See below. Most other actions
- have little to no impact on speed.</P
-><P
-> Also, when filtering is enabled but zlib support isn't available, compression
- is often disabled (see <A
-HREF="../user-manual/actions-file.html#PREVENT-COMPRESSION"
-TARGET="_top"
->prevent-compression</A
->).
- This can have an impact on speed as well, although it's probably smaller than
- you might think. Again, the page size, etc. will determine how much of an impact.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="LOADINGTIMES"
->4.2. I notice considerable
-delays in page requests. What's wrong?</A
-></H3
-><P
-> If you use any <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#FILTER"
-TARGET="_top"
->filter</A
-></TT
-> action,
- such as filtering banners by size, web-bugs etc, or the <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#DEANIMATE-GIFS"
-TARGET="_top"
->deanimate-gifs</A
-></TT
->
- action, the entire document must be loaded into memory in order for the filtering 
- mechanism to work, and nothing is sent to the browser during this time.</P
-><P
-> The loading time typically does not really change much in real numbers, but
- the feeling is different, because most browsers are able to start rendering
- incomplete content, giving the user a feeling of "it works". This effect is
- more noticeable on slower dialup connections. Extremely large documents
- may have some impact on the time to load the page where there is filtering
- being done. But overall, the difference should be very minimal. If there is a
- big impact, then probably some other situation is contributing (like
- anti-virus software).
- </P
-><P
-> Filtering is automatically disabled for inappropriate MIME types. But note 
- that if the web server mis-reports the MIME type, then content that should
- not be filtered, could be. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> only knows how
- to differentiate filterable content because of the MIME type as reported by
- the server, or because of some configuration setting that enables/disables
- filtering.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="CONFIGURL"
->4.3. What are "http://config.privoxy.org/"; and
-"http://p.p/";?</A
-></H3
-><P
-> <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
-> is the
- address of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s built-in user interface, and 
- <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
-> is a shortcut for it.</P
-><P
-> Since <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> sits between your web browser and the Internet, 
- it can simply intercept requests for these addresses and answer them with its built-in
- <SPAN
-CLASS="QUOTE"
->"web server"</SPAN
->.</P
-><P
-> This also makes for a good test for your browser configuration: If entering the
- URL <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
- takes you to a page saying <SPAN
-CLASS="QUOTE"
->"This is Privoxy ..."</SPAN
->, everything is OK.
- If you get a page saying <SPAN
-CLASS="QUOTE"
->"Privoxy is not working"</SPAN
-> instead, then
- your browser didn't use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> for the request,
- hence it could not be intercepted, and you have accessed the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->real</I
-></SPAN
->
- web site at config.privoxy.org.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NEWADS"
->4.4. How can I submit new ads, or report
-problems?</A
-></H3
-><P
->Please see the <A
-HREF="contact.html"
->Contact section</A
-> for
-various ways to interact with the developers.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NEWADS2"
->4.5. If I do submit missed ads, will 
-they be included in future updates?</A
-></H3
-><P
-> Whether such submissions are eventually included in the
- <TT
-CLASS="FILENAME"
->default.action</TT
-> configuration file depends on how 
- significant the issue is. We of course want to address any potential 
- problem with major, high-profile sites such as <I
-CLASS="CITETITLE"
->Google</I
->, 
- <I
-CLASS="CITETITLE"
->Yahoo</I
->, etc. Any site with global or regional reach, 
- has a good chance of being a candidate. But at the other end of the spectrum
- are any number of smaller, low-profile sites such as for local clubs or
- schools. Since their reach and impact are much less, they are best handled by
- inclusion in the user's <TT
-CLASS="FILENAME"
->user.action</TT
->, and thus would be
- unlikely to be included. </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NOONECARES"
->4.6. Why doesn't anyone answer my support 
-request?</A
-></H3
-><P
->Rest assured that it has been read and considered. Why it is not answered,
-could be for various reasons, including no one has a good answer for it, no
-one has had time to yet investigate it thoroughly, it has been reported
-numerous times already, or because not enough information was provided to help
-us help you. Your efforts are not wasted, and we do appreciate them.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="IP"
->4.7. How can I hide my IP address?</A
-></H3
-><P
-> If you run both the browser and <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> locally, you cannot hide your IP
- address with <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> or ultimately any other
- software alone. The server needs to know your IP address so that it knows
- where to send the responses back. </P
-><P
-> There are many publicly usable "anonymous" proxies out there, which
- provide a further level of indirection between you and the web server.</P
-><P
-> However, these proxies are called "anonymous" because you don't need
- to authenticate, not because they would offer any real anonymity.
- Most of them will log your IP address and make it available to the
- authorities in case you violate the law of the country they run in. In fact
- you can't even rule out that some of them only exist to *collect* information
- on (those suspicious) people with a more than average preference for privacy.</P
-><P
-> If you want to hide your IP address from most adversaries,
- you should consider chaining <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- with <A
-HREF="https://www.torproject.org/";
-TARGET="_top"
->Tor</A
->.
- The configuration details can be found in
- <A
-HREF="#TOR"
-TARGET="_top"
->How do I use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> together
- with <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> section</A
->
- just below.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN794"
->4.8. Can Privoxy guarantee I am anonymous?</A
-></H3
-><P
-> No. Your chances of remaining anonymous are improved, but unless you
- <A
-HREF="#TOR"
-TARGET="_top"
->chain <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-></A
->
- or a similar proxy and know what you're doing when it comes to configuring
- the rest of your system, you should assume that everything you do
- on the Web can be traced back to you.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can remove various information about you,
- and allows <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->you</I
-></SPAN
-> more freedom to decide which sites 
- you can trust, and what details you want to reveal. But it neither 
- hides your IP address, nor can it guarantee that the rest of the system
- behaves correctly. There are several possibilities how a web sites can find
- out who you are, even if you are using a strict <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- configuration and chained it with <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->.</P
-><P
-> Most of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> privacy-enhancing features can be easily subverted
- by an insecure browser configuration, therefore you should use a browser that can
- be configured to only execute code from trusted sites, and be careful which sites you trust.
- For example there is no point in having <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- modify the User-Agent header, if websites can get all the information they want
- through JavaScript, ActiveX, Flash, Java etc.</P
-><P
-> A few browsers disclose the user's email address in certain situations, such
- as when transferring a file by FTP. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- does not filter FTP. If you need this feature, or are concerned about the
- mail handler of your browser disclosing your email address, you might
- consider products such as <SPAN
-CLASS="APPLICATION"
->NSClean</SPAN
->.</P
-><P
-> Browsers available only as binaries could use non-standard headers to give
- out any information they can have access to: see the manufacturer's license
- agreement. It's impossible to anticipate and prevent every breach of privacy
- that might occur. The professionally paranoid prefer browsers available as
- source code, because anticipating their behavior is easier. Trust the source,
- Luke!</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN812"
->4.9. A test site says I am not using a Proxy.</A
-></H3
-><P
-> Good! Actually, they are probably testing for some other kinds of proxies.
- Hiding yourself completely would require additional steps.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="TOR"
->4.10. How do I use Privoxy
- together with Tor?</A
-></H3
-><P
-> Before you configure <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to use
- <A
-HREF="https://www.torproject.org/";
-TARGET="_top"
->Tor</A
->,
- please follow the <I
-CLASS="CITETITLE"
->User Manual</I
-> chapters
- <A
-HREF="../user-manual/installation.html"
-TARGET="_top"
->2. Installation</A
-> and
- <A
-HREF="../user-manual/startup.html"
-TARGET="_top"
->5. Startup</A
-> to make sure
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> itself is setup correctly.</P
-><P
-> 
- If it is, refer to <A
-HREF="https://www.torproject.org/documentation.html";
-TARGET="_top"
->Tor's
- extensive documentation</A
-> to learn how to install <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->,
- and make sure <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->'s logfile says that
- <SPAN
-CLASS="QUOTE"
->"Tor has successfully opened a circuit"</SPAN
-> and it
- <SPAN
-CLASS="QUOTE"
->"looks like client functionality is working"</SPAN
->.</P
-><P
-> If either <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> or <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- isn't working, their combination most likely will neither. Testing them on their
- own will also help you to direct problem reports to the right audience.
- If <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> isn't working, don't bother the
- <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> developers. If <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->
- isn't working, don't send bug reports to the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Team.</P
-><P
-> If you verified that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->
- are working, it is time to connect them. As far as <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- is concerned, <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> is just another proxy that can be reached
- by socks4 or socks4a. Most likely you are interested in <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->
- to increase your anonymity level, therefore you should use socks4a, to make sure DNS requests are
- done through <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> and thus invisible to your local network.</P
-><P
-> Since <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.5, its
- <A
-HREF="../user-manual/config.html"
-TARGET="_top"
->main configuration file</A
->
- is already prepared for <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->, if you are using a
- default <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> configuration and run it on the same
- system as <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, you just have to edit the
- <A
-HREF="../user-manual/config.html#FORWARDING"
-TARGET="_top"
->forwarding section</A
->
- and uncomment the line:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->#        forward-socks4a             /     127.0.0.1:9050 .
- </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> This is enough to reach the Internet, but additionally you might want to
- uncomment the following forward rules, to make sure your local network is still
- reachable through Privoxy:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->#        forward         192.168.*.*/     .
-#        forward            10.*.*.*/     .
-#        forward           127.*.*.*/     .
- </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Unencrypted connections to systems in these address ranges will
- be as (un)secure as the local network is, but the alternative is
- that your browser can't reach the network at all. Then again,
- that may actually be desired and if you don't know for sure
- that your browser has to be able to reach the local network,
- there's no reason to allow it.</P
-><P
-> If you want your browser to be able to reach servers in your local
- network by using their names, you will need additional exceptions
- that look like this:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->#        forward           localhost/     .
- </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Save the modified configuration file and open
- <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status/</A
->
- in your browser, confirm that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has reloaded its configuration
- and that there are no other forward lines, unless you know that you need them. If everything looks good,
- refer to
- <A
-HREF="https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#IsMyConnectionPrivate";
-TARGET="_top"
->Tor
- Faq 4.2</A
-> to learn how to verify that you are really using <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->.</P
-><P
-> Afterward, please take the time to at least skim through the rest
- of <SPAN
-CLASS="APPLICATION"
->Tor's</SPAN
-> documentation. Make sure you understand
- what <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> does, why it is no replacement for
- application level security, and why you probably don't want to
- use it for unencrypted logins.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN868"
->4.11. Might some things break because header information or
-content is being altered?</A
-></H3
-><P
-> Definitely. It is common for sites to use browser type, browser version, 
- HTTP header content, and various other techniques in order to dynamically
- decide what to display and how to display it. What you see, and what I see,
- might be very different. There are many, many ways that this can be handled,
- so having hard and fast rules, is tricky.</P
-><P
-> The <SPAN
-CLASS="QUOTE"
->"User-Agent"</SPAN
-> is sometimes used in this way to identify
- the browser, and adjust content accordingly.</P
-><P
-> Also, different browsers use different encodings of non-English
- characters, certain web servers convert pages on-the-fly according to the
- User Agent header. Giving a <SPAN
-CLASS="QUOTE"
->"User Agent"</SPAN
-> with the wrong
- operating system or browser manufacturer causes some sites in these languages
- to be garbled; Surfers to Eastern European sites should change it to
- something closer. And then some page access counters work by looking at the
- <SPAN
-CLASS="QUOTE"
->"Referer"</SPAN
-> header; they may fail or break if unavailable. The
- weather maps of Intellicast have been blocked by their server when no
- <SPAN
-CLASS="QUOTE"
->"Referer"</SPAN
-> or cookie is provided, is another example. (But you
- can forge both headers without giving information away). There are
- many other ways things can go wrong when trying to fool a web server. The
- results of which could inadvertently cause pages to load incorrectly,
- partially, or even not at all. And there may be no obvious clues as to just
- what went wrong, or why. Nowhere will there be a message that says 
- <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Turn off <TT
-CLASS="LITERAL"
->fast-redirects</TT
-> or else!</I
-></SPAN
-> 
- "</SPAN
-></P
-><P
-> Similar thoughts apply to modifying JavaScript, and, to a lesser degree,
- HTML elements.</P
-><P
-> If you have problems with a site, you will have to adjust your configuration 
- accordingly. Cookies are probably the most likely adjustment that may 
- be required, but by no means the only one.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN882"
->4.12. Can Privoxy act as a <SPAN
-CLASS="QUOTE"
->"caching"</SPAN
-> proxy to 
-speed up web browsing?</A
-></H3
-><P
-> No, it does not have this ability at all. You want something like 
- <A
-HREF="http://www.squid-cache.org/";
-TARGET="_top"
->Squid</A
-> or
- <A
-HREF="http://www.pps.jussieu.fr/~jch/software/polipo/";
-TARGET="_top"
->Polipo</A
-> for this.
- And, yes, before you ask, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can co-exist 
- with other kinds of proxies like <SPAN
-CLASS="APPLICATION"
->Squid</SPAN
->.
- See the <A
-HREF="../user-manual/config.html#FORWARDING"
-TARGET="_top"
->forwarding
- chapter</A
-> in the <A
-HREF="../user-manual/index.html"
-TARGET="_top"
->user
- manual</A
-> for details.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN892"
->4.13. What about as a firewall? Can Privoxy protect me?</A
-></H3
-><P
-> Not in the way you mean, or in the way some firewall vendors claim they can. 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can help protect your privacy, but can't
- protect your system from intrusion attempts. It is, of course, perfectly possible
- to use <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN897"
->4.14. I have large empty spaces / a checkerboard pattern now where
-ads used to be. Why?</A
-></H3
-><P
-> It is technically possible to eliminate banners and ads in a way that frees
- their allocated page space. This could easily be done by blocking with 
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> filters,
- and eliminating the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->entire</I
-></SPAN
-> image references from the
- HTML page source. </P
-><P
-> But, this would consume considerably more CPU resources (IOW, slow things
- down), would likely destroy the layout of some web pages which rely on the
- banners utilizing a certain amount of page space, and might fail in other
- cases, where the screen space is reserved (e.g. by HTML tables for instance).
- Also, making ads and banners disappear without any trace complicates
- troubleshooting, and would sooner or later be problematic.</P
-><P
-> The better alternative is to instead let them stay, and block the resulting
- requests for the banners themselves as is now the case. This leaves either
- empty space, or the familiar checkerboard pattern.</P
-><P
-> So the developers won't support this in the default configuration, but you
- can of course define appropriate filters yourself to achieve this.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN905"
->4.15. How can Privoxy filter Secure (HTTPS) URLs?</A
-></H3
-><P
-> Since secure HTTP connections are encrypted SSL sessions between your browser
- and the secure site, and are meant to be reliably <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->secure</I
-></SPAN
->,
- there is little that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can do but hand the raw
- gibberish data though from one end to the other unprocessed.</P
-><P
-> The only exception to this is blocking by host patterns, as the client needs
- to tell <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> the name of the remote server,
- so that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can establish the connection.
- If that name matches a host-only pattern, the connection will be blocked.</P
-><P
-> As far as ad blocking is concerned, this is less of a restriction than it may
- seem, since ad sources are often identifiable by the host name, and often
- the banners to be placed in an encrypted page come unencrypted nonetheless
- for efficiency reasons, which exposes them to the full power of 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s ad blocking.</P
-><P
-> <SPAN
-CLASS="QUOTE"
->"Content cookies"</SPAN
-> (those that are embedded in the actual HTML or
- JS page content, see <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#FILTER-CONTENT-COOKIES"
-TARGET="_top"
->filter{content-cookies}</A
-></TT
->), 
- in an SSL transaction will be impossible to block under these conditions. 
- Fortunately, this does not seem to be a very common scenario since most 
- cookies come by traditional means.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN919"
->4.16. Privoxy runs as a <SPAN
-CLASS="QUOTE"
->"server"</SPAN
->. How 
-secure is it? Do I need to take any special precautions?</A
-></H3
-><P
-> On Unix-like systems, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can run as a non-privileged 
- user, which is how we recommend it be run. Also, by default
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> listens to requests from <SPAN
-CLASS="QUOTE"
->"localhost"</SPAN
->
- only.</P
-><P
-> The server aspect of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is not itself directly 
- exposed to the Internet in this configuration. If you want to have
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> serve as a LAN proxy, this will have to
- be opened up to allow for LAN requests. In this case, we'd recommend
- you specify only the LAN gateway address, e.g. 192.168.1.1, in the main 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> configuration file and check all <A
-HREF="../user-manual/config.html#ACCESS-CONTROL"
-TARGET="_top"
->access control and security
- options</A
->. All LAN hosts can then use this as their proxy address
- in the browser proxy configuration, but <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- will not listen on any external interfaces. ACLs can be defined in addition,
- and using a firewall is always good too. Better safe than sorry.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="TURNOFF"
->4.17. Can I temporarily disable Privoxy?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> doesn't have a transparent proxy mode,
- but you can toggle off blocking and content filtering.</P
-><P
-> The easiest way to do that is to point your browser
- to the remote toggle URL: <A
-HREF="http://config.privoxy.org/toggle";
-TARGET="_top"
->http://config.privoxy.org/toggle</A
->.</P
-><P
-> See the <A
-HREF="../user-manual/appendix.html#BOOKMARKLETS"
-TARGET="_top"
->Bookmarklets section</A
-> 
- of the <I
-CLASS="CITETITLE"
->User Manual</I
-> for an easy way to access this 
- feature. Note that this is a feature that may need to be enabled in the main 
- <TT
-CLASS="FILENAME"
->config</TT
-> file.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="REALLYOFF"
->4.18. When <SPAN
-CLASS="QUOTE"
->"disabled"</SPAN
-> is Privoxy totally 
-out of the picture?</A
-></H3
-><P
-> No, this just means all optional filtering and actions are disabled.
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is still acting as a proxy, but just 
- doing less of the things that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> would
- normally be expected to do. It is still a <SPAN
-CLASS="QUOTE"
->"middle-man"</SPAN
-> in 
- the interaction between your browser and web sites. See below to bypass 
- the proxy.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="TURNOFF2"
->4.19. How can I tell Privoxy to totally ignore certain sites?</A
-></H3
-><P
-> Bypassing a proxy, or proxying based on arbitrary criteria, is purely a browser
- configuration issue, not a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> issue. Modern browsers typically do have
- settings for not proxying certain sites. Check your browser's help files.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="CRUNCH"
->4.20. My logs show Privoxy <SPAN
-CLASS="QUOTE"
->"crunches"</SPAN
-> 
-ads, but also its own internal CGI pages. What is a <SPAN
-CLASS="QUOTE"
->"crunch"</SPAN
->?</A
-></H3
-><P
-> A <SPAN
-CLASS="QUOTE"
->"crunch"</SPAN
-> simply means <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> intercepted 
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->something</I
-></SPAN
->, nothing more. Often this is indeed ads or
- banners, but <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> uses the same mechanism for
- trapping requests for its own internal pages. For instance, a request for
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> configuration page at: <A
-HREF="http://config.privoxy.org";
-TARGET="_top"
->http://config.privoxy.org</A
->, is
- intercepted (i.e. it does not go out to the 'net), and the familiar CGI
- configuration is returned to the browser, and the log consequently will show
- a <SPAN
-CLASS="QUOTE"
->"crunch"</SPAN
->.</P
-><P
-> Since version 3.0.7, Privoxy will also log the crunch reason.
- If you are using an older version you might want to upgrade.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DOWNLOADS"
->4.21. Can Privoxy effect files that I download
-from a webserver? FTP server?</A
-></H3
-><P
-> From the webserver's perspective, there is no difference between
- viewing a document (i.e. a page), and downloading a file. The same is true of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. If there is a match for a <TT
-CLASS="LITERAL"
-><A
-HREF="../user-manual/actions-file.html#BLOCK"
-TARGET="_top"
->block</A
-></TT
-> pattern,
- it will still be blocked, and of course this is obvious. 
- </P
-><P
-> Filtering is potentially more of a concern since the results are not always
- so obvious, and the effects of filtering are there whether the file is simply
- viewed, or downloaded. And potentially whether the content is some obnoxious
- advertisement, or Mr. Jimmy's latest/greatest source code jewel. Of course,
- one of these presumably is <SPAN
-CLASS="QUOTE"
->"bad"</SPAN
-> content that we don't want, and
- the other is <SPAN
-CLASS="QUOTE"
->"good"</SPAN
-> content that we do want.
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is blind to the differences, and can only
- distinguish <SPAN
-CLASS="QUOTE"
->"good from bad"</SPAN
-> by the configuration parameters
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->we</I
-></SPAN
-> give it.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> knows the differences in files according
- to the <SPAN
-CLASS="QUOTE"
->"Content Type"</SPAN
-> as reported by the webserver. If this is
- reported accurately (e.g. <SPAN
-CLASS="QUOTE"
->"application/zip"</SPAN
-> for a zip archive),
- then <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> knows to ignore these where
- appropriate. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> potentially can filter HTML
- as well as plain text documents, subject to configuration parameters of
- course. Also, documents that are of an unknown type (generally assumed to be
- <SPAN
-CLASS="QUOTE"
->"text/plain"</SPAN
->) can be filtered, as will those that might be
- incorrectly reported by the webserver. If such a file is a downloaded file
- that is intended to be saved to disk, then any content that might have been
- altered by filtering, will be saved too, for these (probably rare) cases.</P
-><P
-> Note that versions later than 3.0.2 do NOT filter document types reported as 
- <SPAN
-CLASS="QUOTE"
->"text/plain"</SPAN
->. Prior to this, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- did filter this document type.</P
-><P
-> In short, filtering is <SPAN
-CLASS="QUOTE"
->"ON"</SPAN
-> if a) the content type as reported
- by the webserver is appropriate <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
-> b) the configuration
- allows it (or at least does not disallow it). That's it. There is no magic
- cookie anywhere to say this is <SPAN
-CLASS="QUOTE"
->"good"</SPAN
-> and this is
- <SPAN
-CLASS="QUOTE"
->"bad"</SPAN
->. It's the configuration that lets it all happen or not.</P
-><P
-> If you download text files, you probably do not want these to be filtered,
- particularly if the content is source code, or other critical content. Source
- code sometimes might be mistaken for Javascript (i.e. the kind that might
- open a pop-up window). It is recommended to turn off filtering for download
- sites (particularly if the content may be plain text files and you are using
- version 3.0.2 or earlier) in your <TT
-CLASS="FILENAME"
->user.action</TT
-> file. And
- also, for any site or page where making <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->any</I
-></SPAN
-> changes at
- all to the content is to be avoided.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> does not do FTP at all, only HTTP 
- and HTTPS (SSL) protocols.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DOWNLOADS2"
->4.22. I just downloaded a Perl script, and Privoxy
-altered it! Yikes, what is wrong!</A
-></H3
-><P
-> Please read above.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="HOSTSFILE"
->4.23. Should I continue to use a <SPAN
-CLASS="QUOTE"
->"HOSTS"</SPAN
-> file for ad-blocking?</A
-></H3
-><P
-> One time-tested technique to defeat common ads is to trick the local DNS
- system by giving a phony IP address for the ad generator in the local 
- <TT
-CLASS="FILENAME"
->HOSTS</TT
-> file, typically using <TT
-CLASS="LITERAL"
->127.0.0.1</TT
->, aka 
- <TT
-CLASS="LITERAL"
->localhost</TT
->. This effectively blocks the ad.</P
-><P
-> There is no reason to use this technique in conjunction with 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- does essentially the same thing, much more elegantly and with much more 
- flexibility. A large <TT
-CLASS="FILENAME"
->HOSTS</TT
-> file, in fact, not only
- duplicates effort, but may get in the way and seriously slow down your system.
- It is recommended to remove such entries from your <TT
-CLASS="FILENAME"
->HOSTS</TT
-> file. If you think 
- your hosts list is neglected by <SPAN
-CLASS="APPLICATION"
->Privoxy's </SPAN
-> 
- configuration, consider adding your list to your <TT
-CLASS="FILENAME"
->user.action</TT
-> file:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  { +block }
-   www.ad.example1.com
-   ad.example2.com
-   ads.galore.example.com
-   etc.example.com</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SEEALSO"
->4.24. Where can I find more information about Privoxy
-and related issues?</A
-></H3
-><P
-> Other references and sites of interest to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- users:</P
-><P
-> <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->http://www.privoxy.org/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Home page. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/faq/";
-TARGET="_top"
->http://www.privoxy.org/faq/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> FAQ. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/developer-manual/";
-TARGET="_top"
->http://www.privoxy.org/developer-manual/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developer manual. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://sourceforge.net/projects/ijbswa/";
-TARGET="_top"
->https://sourceforge.net/projects/ijbswa/</A
->, 
-   the Project Page for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on 
-   <A
-HREF="http://sourceforge.net";
-TARGET="_top"
->SourceForge</A
->.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->,
-   the web-based user interface. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> must be
-   running for this to work. Shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://sourceforge.net/tracker/?group_id=11118&#38;atid=460288";
-TARGET="_top"
->https://sourceforge.net/tracker/?group_id=11118&#38;atid=460288</A
->, to submit <SPAN
-CLASS="QUOTE"
->"misses"</SPAN
-> and other
-   configuration related suggestions to the developers. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- 
- 
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.junkbusters.com/ht/en/cookies.html";
-TARGET="_top"
->http://www.junkbusters.com/ht/en/cookies.html</A
->,
-   an explanation how cookies are used to track web users.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
->http://www.junkbusters.com/ijb.html</A
->,
-   the original Internet Junkbuster.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.squid-cache.org/";
-TARGET="_top"
->http://www.squid-cache.org/</A
->, a popular
-   caching proxy, which is often used together with <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.pps.jussieu.fr/~jch/software/polipo/";
-TARGET="_top"
->http://www.pps.jussieu.fr/~jch/software/polipo/</A
->,
-   <SPAN
-CLASS="APPLICATION"
->Polipo</SPAN
-> is a caching proxy with advanced features
-   like pipelining, multiplexing and caching of partial instances. In many setups
-   it can be used as <SPAN
-CLASS="APPLICATION"
->Squid</SPAN
-> replacement.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://www.torproject.org/";
-TARGET="_top"
->https://www.torproject.org/</A
->, 
-   <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> can help anonymize web browsing, 
-   web publishing, instant messaging, IRC, SSH, and other applications.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="MICROSUCK"
->4.25. I've noticed that Privoxy changes <SPAN
-CLASS="QUOTE"
->"Microsoft"</SPAN
-> to 
-<SPAN
-CLASS="QUOTE"
->"MicroSuck"</SPAN
->! Why are you manipulating my browsing?</A
-></H3
-><P
-> We're not. The text substitutions that you are seeing are disabled
- in the default configuration as shipped. You have either manually
- activated the <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->fun</TT
->"</SPAN
-> filter which
- is clearly labeled <SPAN
-CLASS="QUOTE"
->"Text replacements for subversive browsing
- fun!"</SPAN
-> or you are using an older Privoxy version and have implicitly
- activated it by choosing the <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
-> profile in the
- web-based editor. Please upgrade.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="VALID"
->4.26. Does Privoxy produce <SPAN
-CLASS="QUOTE"
->"valid"</SPAN
-> HTML (or XHTML)?</A
-></H3
-><P
-> Privoxy generates HTML in both its own <SPAN
-CLASS="QUOTE"
->"templates"</SPAN
->, and possibly
- whenever there are text substitutions via a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> filter. While this
- should always conform to the HTML 4.01 specifications, it has not been
- validated against this or any other standard. </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="configuration.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="trouble.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Configuration</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Troubleshooting</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/faq/trouble.html b/external/privoxy/doc/webserver/faq/trouble.html
deleted file mode 100644
index 8bc5b70..0000000
--- a/external/privoxy/doc/webserver/faq/trouble.html
+++ /dev/null
@@ -1,1276 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Troubleshooting</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy Frequently Asked Questions"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Miscellaneous"
-HREF="misc.html"><LINK
-REL="NEXT"
-TITLE="Contacting the developers, Bug Reporting and Feature Requests"
-HREF="contact.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy Frequently Asked Questions</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="misc.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="contact.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="TROUBLE"
->5. Troubleshooting</A
-></H1
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN1084"
->5.1. I cannot connect to any websites. Or, I am getting
-<SPAN
-CLASS="QUOTE"
->"connection refused"</SPAN
-> message with every web page. Why?</A
-></H3
-><P
-> There are several possibilities:</P
-><P
-><P
-></P
-><UL
-><LI
-><P
-><SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is not running. Solution: verify 
- that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is installed correctly, has not crashed, and is indeed running.
- Turn on <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> logging, and look at the logs to see what they say.</P
-></LI
-><LI
-><P
->Or your browser is configured for a different port than what
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is using. Solution: verify that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- and your browser are set to the same port (<TT
-CLASS="LITERAL"
->listen-address</TT
->).</P
-></LI
-><LI
-><P
->Or if using a forwarding rule, you have a configuration problem or a
- problem with a host in the forwarding chain. Solution: temporarily alter your
- configuration and take the forwarders out of the equation.</P
-></LI
-><LI
-><P
->  Or you have a firewall that is interfering and blocking you. Solution: 
-  try disabling or removing the firewall as a simple test.
- </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="ERROR503"
->5.2. Why am I getting a 503 Error (WSAECONNREFUSED) on every page?</A
-></H3
-><P
->  More than likely this is a problem with your TCP/IP networking. ZoneAlarm has
-  been reported to cause this symptom -- even if not running! The solution is
-  to either fight the ZA configuration, or uninstall ZoneAlarm, and then find
-  something better behaved in its place. Other personal firewall type products
-  may cause similar type problems if not configured correctly.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="AEN1107"
->5.3. I just added a new rule, but the steenkin ad is 
-still getting through. How?</A
-></H3
-><P
-> If the ad had been displayed before you added its URL, it will probably be
- held in the browser's cache for some time, so it will be displayed without
- the need for any request to the server, and <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- will not be involved. Flush the browser's caches, and then try again.</P
-><P
-> If this doesn't help, you probably have an error in the rule you
- applied. Try pasting the full URL of the offending ad into <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->http://config.privoxy.org/show-url-info</A
->
- and see if it really matches your new rule. Blocking ads is like blocking
- spam: a lot of tinkering is required to stay ahead of the game. And 
- remember you need to block the URL of the ad in question, which may be 
- entirely different from the site URL itself. Most ads are hosted on different
- servers than the main site itself. If you right-click on the ad, you should
- be able to get all the relevant information you need. Alternately, you can 
- find the correct URL by looking at <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> logs
- (you may need to enable logging in the main config file if its disabled).</P
-><P
-> Below is a slightly modified real-life log snippet that originates with one 
- requested URL: <TT
-CLASS="LITERAL"
->www.example.com</TT
-> (name of site was changed
- for this example, the number of requests is real). You can see in this the
- complexity of what goes into making up this one <SPAN
-CLASS="QUOTE"
->"page"</SPAN
->. There
- are eight different domains involved here, with thirty two separate URLs
- requested in all, making up all manner of images, Shockwave Flash,
- JavaScript, CSS stylesheets, scripts, and other related content. Some of this
- content is obviously <SPAN
-CLASS="QUOTE"
->"good"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"bad"</SPAN
->, but not all.
- Many of the more questionable looking requests, are going to outside domains
- that seem to be identifying themselves with suspicious looking names, making
- our job a little easier. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has <SPAN
-CLASS="QUOTE"
->"crunched"</SPAN
-> (meaning caught 
- and BLOCKED) quite a few items in this example, but perhaps missed a few as well. </P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->Request: www.example.com/
-Request: www.example.com/favicon.ico
-Request: img.example.com/main.css
-Request: img.example.com/sr.js
-Request: example.betamarker.com/example.html
-Request: www.lik-sang.com/Banners/bestsellers/skyscraper.php?likref=BSellers
-Request: img.example.com/pb.png
-Request: www.google-analytics.com/urchin.js crunch! (Blocked)
-Request: www.advertising-department.com/ats/switch.ps.php?26856 crunch! (Blocked)
-Request: img.example.com/p.gif
-Request: www.popuptraffic.com/assign.php?l=example&#38;mode=behind crunch! (Blocked)
-Request: www.popuptraffic.com/scripts/popup.php?hid=5c3cf&#38;tmpl=PBa.tmpl crunch! (Blocked)
-Request: www.popuptraffic.com/assign.php?l=example crunch! (Blocked)
-Request: www.lik-sang.com/Banners/best_sellers/best_sellers.css
-Request: www.adtrak.net/adx.js crunch! (Blocked)
-Request: img.example.com/hbg.gif
-Request: img.example.com/example.jpg
-Request: img.example.com/mt.png
-Request: img.example.com/mm.png
-Request: img.example.com/mb.png
-Request: www.popuptraffic.com/scripts/popup.php?hid=a71b91fa5&#38;tmpl=Ua.tmp crunch! (Blocked)
-Request: www.example.com/tracker.js
-Request: www.lik-sang.com/Banners/best_sellers/lsi_head.gif
-Request: www.adtrak.net/adjs.php?n=020548130&#38;what=zone:61 crunch! (Blocked)
-Request: www.adtrak.net/adjs.php?n=463594413&#38;what=zone:58&#38;source=Ua crunch! (Blocked)
-Request: www.lik-sang.com/Banners/best_sellers/bottomani.swf
-Request: mmm.elitemediagroup.net/install.php?allowpop=no&#38;popupmincook=0&#38;allowsp2=1 crunch! (Blocked)
-Request: www.example.com/tracker.js?screen=1400x1050&#38;win=962x693
-Request: www.adtrak.net/adlog.php?bannerid=1309&#38;clientid=439&#38;zoneid=61 crunch! (Blocked)
-Request: 66.70.21.80/scripts/click.php?hid=5c3cf599a9efd0320d26&#38;si
-Request: 66.70.21.80/img/pixel.gif
-Request: www.adtrak.net/adlog.php?bannerid=1309&#38;clientid=439&#38;zoneid=58&#38;source=Ua&#38;block=86400 crunch! (Blocked)
-Request: 66.70.21.80/scripts/click.php?hid=a71b9f6504b0c5681fa5&#38;si=Ua</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Despite 12 out of 32 requests being blocked, the page looked, and seemed to
- behave perfectly <SPAN
-CLASS="QUOTE"
->"normal"</SPAN
-> (minus some ads, of course).</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="BADSITE"
->5.4. One of my favorite sites does not work with Privoxy.
-What can I do?</A
-></H3
-><P
-> First verify that it is indeed a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> problem, 
- by toggling off <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> through <A
-HREF="http://config.privoxy.org/toggle";
-TARGET="_top"
->http://config.privoxy.org/toggle</A
->
- (the toggle feature may need to be enabled in the main
- <TT
-CLASS="FILENAME"
->config</TT
->),
- and then shift-reloading the problem page (i.e. holding down the shift key
- while clicking reload. Alternatively, flush your browser's disk and memory
- caches).</P
-><P
-> If the problem went away, we know we have a configuration related problem.
- Now go to <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->http://config.privoxy.org/show-url-info</A
->
- and paste the full URL of the page in question into the prompt. See which
- actions are being applied to the URL, and which matches in which actions
- files are responsible for that. It might be helpful also to look at your logs
- for this site too, to see what else might be happening (note: logging may need
- to be enabled in the main config file). Many sites are
- complex and require a number of related pages to help present their content.
- Look at what else might be used by the page in question, and what of that
- might be <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->required</I
-></SPAN
->.
- Now, armed with this information, go to
- <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->
- and select the appropriate actions files for editing. </P
-><P
-> You can now either look for a section which disables the actions that
- you suspect to cause the problem and add a pattern for your site there,
- or make up a completely new section for your site. In any case, the recommended
- way is to disable only the prime suspect, reload the problem page, and only
- if the problem persists, disable more and more actions until you have
- identified the culprit. You may or may not want to turn the other actions
- on again. Remember to flush your browser's caches in between any such changes!</P
-><P
-> Alternately, if you are comfortable with a text editor, you can accomplish 
- the same thing by editing the appropriate actions file. Probably the easiest 
- way to deal with such problems when editing by hand is to add your
- site to a <TT
-CLASS="LITERAL"
->{ fragile }</TT
-> section in <TT
-CLASS="FILENAME"
->user.action</TT
->,
- which is an alias that turns off most <SPAN
-CLASS="QUOTE"
->"dangerous"</SPAN
->
- actions, but is also likely to turn off more actions then needed, and thus lower
- your privacy and protection more than necessary, </P
-><P
-> Troubleshooting actions is discussed in more detail in the <A
-HREF="../user-manual/appendix.html#ACTIONSANAT"
-TARGET="_top"
->User Manual appendix,
- Troubleshooting: the Anatomy of an Action</A
->.
- There is also an <A
-HREF="../user-manual/actions-file.html#ACT-EXAMPLES"
-TARGET="_top"
->actions tutorial</A
->
- with general configuration information and examples.</P
-><P
-> As a last resort, you can always see if your browser has a setting that will 
- bypass the proxy setting for selective sites. Modern browsers can do this.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DUN"
->5.5. After installing Privoxy, I have to log in
-every time I start IE. What gives?</A
-></H3
-><P
-> This is a quirk that effects the installation of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, in conjunction with Internet Explorer and
- Internet Connection Sharing on Windows 2000 and Windows XP. The symptoms may
- appear to be corrupted or invalid DUN settings, or passwords.</P
-><P
-> When setting up an NT based Windows system with
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> you may find that things do not seem to be
- doing what you expect. When you set your system up you will probably have set
- up Internet Connection Sharing (ICS) with Dial up Networking (DUN) when
- logged in with administrator privileges. You will probably have made this DUN
- connection available to other accounts that you may have set-up on your
- system. E.g. Mum or Dad sets up the system and makes accounts suitably
- configured for the kids.</P
-><P
-> When setting up <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in this environment you
- will have to alter the proxy set-up of Internet Explorer (IE) for the
- specific DUN connection on which you wish to use
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. When you do this the ICS DUN set-up
- becomes user specific. In this instance you will see no difference if you
- change the DUN connection under the account used to set-up the connection.
- However when you do this from another user you will notice that the DUN
- connection changes to make available to "Me only". You will also find that
- you have to store the password under each different user!</P
-><P
-> The reason for this is that each user's set-up for IE is user specific. Each
- set-up DUN connection and each LAN connection in IE store the settings for
- each user individually. As such this enforces individual configurations
- rather than common ones. Hence the first time you use a DUN connection after
- re-booting your system it may not perform as you expect, and prompt you for 
- the password. Just set and save the password again and all should be OK.</P
-><P
->[Thanks to Ray Griffith for this submission.]</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="FTP"
->5.6. I cannot connect to any FTP sites. Privoxy
- is blocking me.</A
-></H3
-><P
->  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> cannot act as a proxy for FTP traffic, 
-  so do not configure your browser to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-  as an FTP proxy. The same is true for <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->any protocol other than HTTP
-  or HTTPS (SSL)</I
-></SPAN
->. 
- </P
-><P
->  Most browsers understand FTP as well as HTTP. If you connect to a site, with
-  a URL like <TT
-CLASS="LITERAL"
->ftp://ftp.example.com</TT
->, your browser is making
-  an FTP connection, and not a HTTP connection. So while your browser may 
-  speak FTP, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> does not, and cannot proxy 
-  such traffic.
- </P
-><P
->  To complicate matters, some systems may have a generic <SPAN
-CLASS="QUOTE"
->"proxy"</SPAN
->
-  setting, which will enable various protocols, including
-  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
-> HTTP and FTP proxying! So it is possible to
-  accidentally enable FTP proxying in these cases. And of course, if this
-  happens, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will indeed cause problems since
-  it does not know FTP. Newer version will give a sane error
-  message if a FTP connection is attempted. Just disable the FTP setting 
-  and all will be well again.
- </P
-><P
->  Will <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> ever proxy FTP traffic? Unlikely.
-  There just is not much reason, and the work to make this happen is more than
-  it may seem.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="MACOSXIE"
->5.7. In Mac OS X, I can't configure Microsoft Internet Explorer to use 
- Privoxy as the HTTP proxy.</A
-></H3
-><P
->  Microsoft Internet Explorer (in versions like 5.1) respects system-wide
-  network settings.  In order to change the HTTP proxy, open System
-  Preferences, and click on the Network icon.  In the settings pane that
-  comes up, click on the Proxies tab.  Ensure the "Web Proxy (HTTP)" checkbox 
-  is checked and enter <TT
-CLASS="LITERAL"
->127.0.0.1</TT
-> in the entry field.  
-  Enter <TT
-CLASS="LITERAL"
->8118</TT
-> in the Port field.  The next time you start
-  IE, it should reflect these values.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="MACOSXUNINSTALL"
->5.8. In Mac OS X, I dragged the Privoxy folder to the trash in order to 
- uninstall it. Now the finder tells me I don't have sufficient privileges to
- empty the trash.</A
-></H3
-><P
-> Note: This ONLY applies to privoxy 3.0.6 and earlier.
- </P
-><P
->  Just dragging the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> folder to the trash is
-  not enough to delete it. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> supplies an
-  <SPAN
-CLASS="APPLICATION"
->uninstall.command</SPAN
-> file that takes care of
-  these details. Open the trash, drag the <SPAN
-CLASS="APPLICATION"
->uninstall.command</SPAN
->
-  file out of the trash and double-click on it. You will be prompted for
-  confirmation and the administration password.
- </P
-><P
->  The trash may still appear full after this command; emptying the trash 
-  from the desktop should make it appear empty again.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="MACOSXIMAGES"
->5.9. In Mac OS X Panther (10.3), images often fail to load and/or I
- experience random delays in page loading. I'm using
- <TT
-CLASS="LITERAL"
->localhost</TT
-> as my browser's proxy setting.</A
-></H3
-><P
->  We believe this is due to an IPv6-related bug in Mac OS X, but don't fully
-  understand the issue yet. In any case, changing the proxy setting to 
-  <TT
-CLASS="LITERAL"
->127.0.0.1</TT
-> instead of <TT
-CLASS="LITERAL"
->localhost</TT
->
-  works around the problem.
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="BLANKPAGE"
->5.10. I get a completely blank page at one site. <SPAN
-CLASS="QUOTE"
->"View Source"</SPAN
->
- shows only: <SPAN
-CLASS="MARKUP"
->&#60;html&#62;&#60;body&#62;&#60;/body&#62;&#60;/html&#62;</SPAN
->. Without
- Privoxy the page loads fine.</A
-></H3
-><P
->  Chances are that the site suffers from a bug in
-  <A
-HREF="http://www.php.net/";
-TARGET="_top"
-><SPAN
-CLASS="APPLICATION"
->PHP</SPAN
-></A
->,
-  which results in empty pages being sent if the client explicitly requests
-  an uncompressed page, like <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> does.
-  This bug has been fixed in PHP 4.2.3.
- </P
-><P
->  To find out if this is in fact the source of the problem, try adding
-  the site to a <TT
-CLASS="LITERAL"
->-prevent-compression</TT
-> section in
-  <TT
-CLASS="FILENAME"
->user.action</TT
->:
- </P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->   # Make exceptions for ill-behaved sites:                                     
-   #                                                                    
-   {-prevent-compression}                                               
-    .example.com</PRE
-></TD
-></TR
-></TABLE
-><P
->  If that works, you may also want to report the problem to the
-  site's webmasters, telling them to use zlib.output_compression
-  instead of ob_gzhandler in their PHP applications (workaround)
-  or upgrade to PHP 4.2.3 or later (fix).
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="NOHOSTNAME"
->5.11. My logs show many <SPAN
-CLASS="QUOTE"
->"Unable to get my own hostname"</SPAN
-> lines.
-Why?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> tries to get the hostname of the system
- its running on from the IP address of the system interface it is bound to
- (from the <TT
-CLASS="FILENAME"
->config</TT
-> file
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->listen-address</I
-></SPAN
-> setting). If the system cannot supply
- this information, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> logs this condition. </P
-><P
-> Typically, this would be considered a minor system configuration error. It is
- not a fatal error to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> however, but may
- result in a much slower response from <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on
- some platforms due to DNS timeouts.</P
-><P
-> This can be caused by a problem with the local <TT
-CLASS="FILENAME"
->hosts</TT
->
- file. If this file has been changed from the original, try reverting it to
- see if that helps. Make sure whatever name(s) are used for the local system,
- that they resolve both ways.</P
-><P
-> You should also be able to work around the problem with the
- <A
-HREF="../user-manual/config.html#HOSTNAME"
-TARGET="_top"
->hostname option</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="INUSE"
->5.12. When I try to launch Privoxy, I get an 
-error message <SPAN
-CLASS="QUOTE"
->"port 8118 is already in use"</SPAN
-> (or similar wording).
-Why?</A
-></H3
-><P
-> Port 8118 is <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> default TCP 
- <SPAN
-CLASS="QUOTE"
->"listening"</SPAN
-> port. Typically this message would mean that there
- is already one instance of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> running, and
- your system is actually trying to start a second
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on the same port, which will not work.
- (You can have multiple instances but they must be assigned different ports.)
- How and why this might happen varies from platform to platform, but you need
- to check your installation and start-up procedures.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DEMORONIZER"
->5.13. Pages with UTF-8 fonts are garbled.</A
-></H3
-><P
-> This is caused by the <SPAN
-CLASS="QUOTE"
->"demoronizer"</SPAN
-> filter. You should either
- upgrade <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, or at least upgrade to the most
- recent <TT
-CLASS="FILENAME"
->default.action</TT
-> file available from <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->SourceForge</A
->.
- Or you can simply disable the demoronizer filter.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DEMORONIZER2"
->5.14. Why are binary files (such as images) corrupted when Privoxy
- is used?</A
-></H3
-><P
-> This may also be caused by the <SPAN
-CLASS="QUOTE"
->"demoronizer"</SPAN
-> filter, 
- in conjunction with a web server that is misreporting the content type. Binary 
- files are exempted from <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> filtering
- (unless the web server by mistake says the file is something else). Either
- upgrade <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, or go to the most recent
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file available from <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->SourceForge</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DEMORONIZER3"
->5.15. What is the <SPAN
-CLASS="QUOTE"
->"demoronizer"</SPAN
-> and why is it there?</A
-></H3
-><P
-> The original demoronizer was a Perl script that cleaned up HTML pages which 
- were created with certain Microsoft products. MS has used proprietary extensions 
- to standardized font encodings (ISO 8859-1), which has caused problems for pages
- that are viewed with non-Microsoft products (and are expecting to see a
- standard set of fonts). The demoronizer corrected these errors so the pages
- displayed correctly. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> borrowed from this
- script, introducing a filter based on the original demoronizer, which in turn could
- correct these errors on the fly. </P
-><P
-> But this is only needed in some situations, and will cause serious problems in some 
- other situations.</P
-><P
-> If you are using Microsoft products, you do not need it. If you need to view 
- pages with UTF-8 characters (such as Cyrillic or Chinese), then it will 
- cause corruption of the fonts, and thus <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->should not be on</I
-></SPAN
->.</P
-><P
-> On the other hand, if you use non-Microsoft products, and you occasionally 
- notice weird characters on pages, you might want to try it.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="WINDOWOPEN"
->5.16. Why do I keep seeing <SPAN
-CLASS="QUOTE"
->"PrivoxyWindowOpen()"</SPAN
-> in raw source code?</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is attempting to disable malicious 
-  <A
-HREF="http://en.wikipedia.org/wiki/Javascript";
-TARGET="_top"
->Javascript</A
-> 
-  in this case, with the <TT
-CLASS="LITERAL"
->unsolicited-popups</TT
->
- filter. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> cannot tell very well 
- <SPAN
-CLASS="QUOTE"
->"good"</SPAN
-> code snippets from <SPAN
-CLASS="QUOTE"
->"bad"</SPAN
-> code snippets.</P
-><P
-> If you see this in HTML source, and the page displays without problems, then 
- this is good, and likely some pop-up window was disabled. If you see this 
- where it is causing a problem, such as a downloaded program source code file, 
- then you should set an exception for this site or page such that the
- integrity of the page stays in tact by disabling all filtering.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="DNSERRORS"
->5.17. I am getting too many DNS errors like <SPAN
-CLASS="QUOTE"
->"404 No Such Domain"</SPAN
->. Why
- can't Privoxy do this better?</A
-></H3
-><P
-> There are potentially several factors here. First of all, the DNS resolution
- is done by the underlying operating system -- not
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> itself. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- merely initiates the process and hands it off, and then later reports
- whatever the outcome was and tries to give a coherent message if there seems
- to be a problem. In some cases, this might otherwise be mitigated by the
- browser itself which might try some work-arounds and alternate approaches (e.g
- adding <SPAN
-CLASS="QUOTE"
->"www."</SPAN
-> to the URL).</P
-><P
-> In other cases, if <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is being chained
- with another proxy, this could complicate the issue, and cause undue
- delays and timeouts. In the case of a <SPAN
-CLASS="QUOTE"
->"socks4a"</SPAN
-> proxy, the socks
- server handles all the DNS.  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> would just be
- the <SPAN
-CLASS="QUOTE"
->"messenger"</SPAN
-> which is reporting whatever problem occurred
- downstream, and not the root cause of the error.</P
-><P
-> In any case, versions newer than 3.0.3 include various improvements to help
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> better handle these cases.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="ALLCPU"
->5.18. At one site Privoxy just hangs, and starts taking 
- all CPU. Why is this?</A
-></H3
-><P
-> This is probably a manifestation of the <SPAN
-CLASS="QUOTE"
->"100% cpu"</SPAN
-> problem that
- occurs on pages containing many (thousands upon thousands) of blank lines. The blank lines 
- are in the raw HTML source of the page, and the browser just ignores them. But the 
- pattern matching in <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> page filtering
- mechanism is trying to match against absurdly long strings and this becomes
- very CPU-intensive, taking a long, long time to complete.</P
-><P
-> Until a better solution comes along, disable filtering on these pages,
- particularly the <TT
-CLASS="LITERAL"
->js-annoyances</TT
-> and
- <TT
-CLASS="LITERAL"
->unsolicited-popups</TT
-> filters. If you run into this problem
- with a recent <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version, please send a problem report.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SLOWCRAWL"
->5.19. I just installed Privoxy, and all my
-browsing has slowed to a crawl. What gives?</A
-></H3
-><P
-> This should not happen, and for the overwhelming number of users world-wide,
- it does not happen. I would suspect some inadvertent interaction of software
- components such as anti-virus software, spyware protectors, personal
- firewalls or similar components. Try disabling (or uninstalling) these one
- at a time and see if that helps. Either way, if you are using a
- recent <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version, please report the problem.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="PREVENTCOMP"
->5.20. Why do my filters work on some sites but not on others?</A
-></H3
-><P
-> It's probably due to compression. It is a common practice for web servers to
- send their content <SPAN
-CLASS="QUOTE"
->"compressed"</SPAN
-> in order to speed things up, and
- then let the browser <SPAN
-CLASS="QUOTE"
->"uncompress"</SPAN
-> them. When compiled with zlib support
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can decompress content before filtering, otherwise you may want to enable
-<A
-HREF="../user-manual/actions-file.html#PREVENT-COMPRESSION"
-TARGET="_top"
->prevent-compression</A
->.</P
-><P
-> As of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.9, zlib support is enabled in the default builds.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SSL-WARNINGS"
->5.21. On some HTTPS sites my browser warns me about unauthenticated content,
- the URL bar doesn't get highlighted and the lock symbol appears to be broken.
- What's going on?</A
-></H3
-><P
-> Probably the browser is requesting ads through HTTPS and <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- is blocking the requests. Privoxy's error messages are delivered
- unencrypted and while it's obvious for the browser that the HTTPS
- request is already blocked by the proxy, some warn about unauthenticated
- content anyway.</P
-><P
-> To work around the problem you can redirect those requests to an invalid
- local address instead of blocking them. While the redirects aren't
- encrypted either, many browsers don't care. They simply follow the
- redirect, fail to reach a server and display an error message instead
- of the ad.</P
-><P
-> To do that, enable logging to figure out which requests get blocked by
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and add the hosts (no path patterns) to a section like this:</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{+redirect{http://127.0.0.1:0/} -block -limit-connect}
-.ivwbox.de:443/</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Additionally you have to configure your browser to contact
- <SPAN
-CLASS="QUOTE"
->"127.0.0.1:0"</SPAN
-> directly (instead of through <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->).</P
-><P
-> To add a proxy exception in <SPAN
-CLASS="APPLICATION"
->Mozilla Firefox</SPAN
->
- open the <SPAN
-CLASS="QUOTE"
->"Preferences"</SPAN
->, click the <SPAN
-CLASS="QUOTE"
->"Settings"</SPAN
->
- button located on the <SPAN
-CLASS="QUOTE"
->"Network"</SPAN
-> tab in the <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
->
- section, and add <SPAN
-CLASS="QUOTE"
->"127.0.0.1:0"</SPAN
-> in the <SPAN
-CLASS="QUOTE"
->"No Proxy for:"</SPAN
->
- field.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="SE-LINUX"
->5.22. I get selinux error messages. How can I fix this?</A
-></H3
-><P
-> Please report the problem to the creator of your selinux policies.</P
-><P
-> The problem is that some selinux policy writers aren't familiar
- with the application they are trying to <SPAN
-CLASS="QUOTE"
->"secure"</SPAN
-> and
- thus create policies that make no sense.</P
-><P
-> In <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> case the problem usually
- is that the policy only allows outgoing connections for certain
- destination ports (e.g. 80 and 443). While this may cover the
- standard ports, websites occasionally use other ports as well.
- This isn't a security problem and therefore <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
- default configuration doesn't block these requests.</P
-><P
-> If you really want to block these ports (and don't be able
- to load websites that don't use standard ports), you should
- configure Privoxy to block these ports as well, so it doesn't
- trigger the selinux warnings.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H3
-CLASS="SECT2"
-><A
-NAME="GENTOO-RICERS"
->5.23. I compiled <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with Gentoo's portage and it appears to be very slow. Why?</A
-></H3
-><P
-> Probably you unintentionally compiled <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> without threading support
- in which case requests have to be serialized and only one can be served
- at the same time.</P
-><P
-> Check your <SPAN
-CLASS="QUOTE"
->"USE"</SPAN
-> flags and make sure they include
- <SPAN
-CLASS="QUOTE"
->"threads"</SPAN
->. If they don't, add the flag and rebuild <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.</P
-><P
-> If you compiled <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with threading support (on POSIX-based systems),
- the <SPAN
-CLASS="QUOTE"
->"Conditional #defines"</SPAN
-> section on <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->
- will list <SPAN
-CLASS="QUOTE"
->"FEATURE_PTHREAD"</SPAN
-> as <SPAN
-CLASS="QUOTE"
->"enabled"</SPAN
->. </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="misc.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="contact.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Miscellaneous</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Contacting the developers, Bug Reporting and Feature Requests</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/images/files-in-use.jpg b/external/privoxy/doc/webserver/images/files-in-use.jpg
deleted file mode 100644
index 207b6f7..0000000
Binary files a/external/privoxy/doc/webserver/images/files-in-use.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/images/proxy_setup.jpg b/external/privoxy/doc/webserver/images/proxy_setup.jpg
deleted file mode 100644
index 9e80f97..0000000
Binary files a/external/privoxy/doc/webserver/images/proxy_setup.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/index.html b/external/privoxy/doc/webserver/index.html
deleted file mode 100644
index 3afc2d9..0000000
--- a/external/privoxy/doc/webserver/index.html
+++ /dev/null
@@ -1,328 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy - Home Page</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><META
-NAME="KEYWORD"
-CONTENT="privoxy"><META
-NAME="KEYWORD"
-CONTENT="HTTP"><META
-NAME="KEYWORD"
-CONTENT="proxy"><META
-NAME="KEYWORD"
-CONTENT="privacy"><META
-NAME="KEYWORD"
-CONTENT="popups"><META
-NAME="KEYWORD"
-CONTENT="po-ups"><META
-NAME="KEYWORD"
-CONTENT="HTML"><META
-NAME="KEYWORD"
-CONTENT="JavaScript"><META
-NAME="KEYWORD"
-CONTENT="cleaning"><META
-NAME="KEYWORD"
-CONTENT="blocking"><META
-NAME="KEYWORD"
-CONTENT="cleaner"><META
-NAME="KEYWORD"
-CONTENT="blocker"><META
-NAME="KEYWORD"
-CONTENT="filter"><META
-NAME="KEYWORD"
-CONTENT="proxy"><META
-NAME="KEYWORD"
-CONTENT="junk"><META
-NAME="KEYWORD"
-CONTENT="ad"><META
-NAME="KEYWORD"
-CONTENT="advertisement"><META
-NAME="KEYWORD"
-CONTENT="banner"><META
-NAME="KEYWORD"
-CONTENT="webbugs"><META
-NAME="KEYWORD"
-CONTENT="web-bugs"><META
-NAME="KEYWORD"
-CONTENT="werbung"><META
-NAME="KEYWORD"
-CONTENT="junkbusters"><META
-NAME="KEYWORD"
-CONTENT="junkbuster"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<meta name="description" content="Privoxy helps users to protect their privacy.">
-<meta name="MSSmartTagsPreventParsing" content="TRUE"></HEAD
-><BODY
-CLASS="ARTICLE"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="ARTICLE"
-><DIV
-CLASS="TITLEPAGE"
-><H1
-CLASS="TITLE"
-><A
-NAME="AEN2"
->Privoxy - Home Page</A
-></H1
-><DIV
-><DIV
-CLASS="ABSTRACT"
-><P
-></P
-><A
-NAME="AEN28"
-></A
-><P
-> Privoxy is a non-caching web proxy with advanced filtering capabilities
- for enhancing privacy, modifying web page data and HTTP headers, controlling
- access, and removing ads and other obnoxious Internet junk. Privoxy has a
- flexible configuration and can be customized to suit individual needs and tastes.
- It has application for both stand-alone systems and multi-user networks.</P
-><P
-> Privoxy is Free Software and licensed under the GPL2.</P
-><P
-> Privoxy is an associated project of Software in the Public Interest (SPI).
- <A
-HREF="http://www.privoxy.org/faq/general.html#DONATE";
-TARGET="_top"
->Donations are welcome</A
->.</P
-><P
->   The most recent release is <A
-HREF="announce.txt"
-TARGET="_top"
->3.0.12 (stable)</A
->. 
-  </P
-><P
-></P
-></DIV
-></DIV
-><HR></DIV
-><DIV
-CLASS="SECT1"
-><H3
-CLASS="SECT1"
-><A
-NAME="DOWNLOAD"
->Download</A
-></H3
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="https://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->Download recent releases</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/quickstart.html"
-TARGET="_top"
->Quickstart after installation</A
->
-   </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT1"
-><HR><H3
-CLASS="SECT1"
-><A
-NAME="DOCS"
->Documentation</A
-></H3
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="user-manual/index.html"
-TARGET="_top"
->User manual</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="faq/index.html"
-TARGET="_top"
->Frequently Asked Questions</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="developer-manual/index.html"
-TARGET="_top"
->Developer Manual</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="man-page/privoxy-man-page.html"
-TARGET="_top"
->Classic Man Page</A
->
-   </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT1"
-><HR><H3
-CLASS="SECT1"
-><A
-NAME="MOREINFO"
->More information</A
-></H3
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="user-manual/contact.html"
-TARGET="_top"
->Support &#38; Service</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/copyright.html"
-TARGET="_top"
->Copyright, License, History &#38; Authors</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/introduction.html#FEATURES"
-TARGET="_top"
->List of (new) Features</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="https://sourceforge.net/projects/ijbswa/";
-TARGET="_top"
->The project page</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/seealso.html"
-TARGET="_top"
->Related links</A
->
-   </P
-></LI
-><LI
-><P
->    
-    
-    <A
-HREF="http://privoxy.org/team/index.html";
-TARGET="_top"
->Pictures of the Privoxy Team</A
->
-   </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT1"
-><HR><H2
-CLASS="SECT1"
-><A
-NAME="AEN83"
-></A
-></H2
-><P
-><DIV
-CLASS="INFORMALTABLE"
-><P
-></P
-><A
-NAME="AEN86"
-></A
-><TABLE
-BORDER="0"
-FRAME="void"
-RULES="all"
-WIDTH="100%"
-CLASS="CALSTABLE"
-><COL
-WIDTH="100%"
-ALIGN="CENTER"
-TITLE="C1"><TBODY
-><TR
-><TD
-ALIGN="CENTER"
->Privoxy is developed on:</TD
-></TR
-><TR
-><TD
-ALIGN="CENTER"
->     <A
-HREF="http://sourceforge.net/";
-TARGET="_top"
->      <IMG
-SRC="http://sourceforge.net/sflogo.php?group_id=11118&#38;type=1&#38;dummy=.gif";>
-     </A
->
-    </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></DIV
-></P
-><P
-> <SUB
->  Copyright &copy; 2001-2009 by Privoxy Developers
- </SUB
-></P
-></DIV
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/man-page/privoxy-man-page.html b/external/privoxy/doc/webserver/man-page/privoxy-man-page.html
deleted file mode 100644
index 91f045d..0000000
--- a/external/privoxy/doc/webserver/man-page/privoxy-man-page.html
+++ /dev/null
@@ -1,294 +0,0 @@
-
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<HTML><HEAD><TITLE>Man page of PRIVOXY</TITLE>
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></HEAD><BODY>
-<H1>PRIVOXY</H1>
-Section:  (1)<BR>Updated: 21 March 2009<BR><A HREF="#index">Index</A>
-<HR>
-
-<A NAME="lbAB">&nbsp;</A>
-<H2>NAME</H2>
-
-privoxy - Privacy Enhancing Proxy
-<A NAME="lbAC">&nbsp;</A>
-<H2>SYNOPSIS</H2>
-
-<P>
-<B>privoxy</B> [<B>--help</B> ] [<B>--version</B> ] [<B>--no-daemon</B> ] [<B>--pidfile </B><I>pidfile</I><B></B> ] [<B>--user </B><I>user[.group]</I><B></B> ] [<B>--chroot</B> ] [<B>--pre-chroot-nslookup </B><I>hostname</I><B></B> ] [<B></B><I>configfile</I><B></B> ]
-<P>
-<A NAME="lbAD">&nbsp;</A>
-<H2>OPTIONS</H2>
-
-<P>
-
-<B>Privoxy</B> may be invoked with the following command line
-options:
-<DL COMPACT>
-<DT><B>--help</B><DD>
-Print brief usage info and exit.
-<DT><B>--version</B><DD>
-Print version info and exit.
-<DT><B>--no-daemon</B><DD>
-Don't  become  a daemon, i.e. don't fork and become process group
-leader, don't detach from controlling tty, and do all logging there.
-<DT><B>--pidfile </B><I>pidfile</I><B></B><DD>
-On startup, write the process ID to <I>pidfile</I>.
-Delete the <I>pidfile</I> on exit.
-Failure to create or delete the <I>pidfile</I>
-is non-fatal. If no <B>--pidfile</B> option is given, no PID file will be used.
-<DT><B>--user </B><I>user[.group]</I><B></B><DD>
-After (optionally) writing the PID file, assume the user ID of
-<I>user</I> and the GID of
-<I>group</I>, or, if the optional
-<I>group</I> was not given, the default group of
-<I>user</I>. Exit if the privileges are not
-sufficient to do so.
-<DT><B>--chroot</B><DD>
-Before changing to the user ID given in the --user option, chroot to
-that user's home directory, i.e. make the kernel pretend to the
-<B>Privoxy</B> process that the directory tree starts
-there. If set up carefully, this can limit the impact of possible
-vulnerabilities in <B>Privoxy</B> to the files contained in
-that hierarchy. 
-<DT><B>--pre-chroot-nslookup </B><I>hostname</I><B></B><DD>
-Initialize the resolver library using <I>hostname</I>
-before chroot'ing. On some systems this reduces the number of files
-that must be copied into the chroot tree.
-</DL>
-<P>
-
-If the <I>configfile</I> is not specified on  the  command  line,
-<B>Privoxy</B>  will  look for a file named
-<I>config</I> in the current directory. If no
-<I>configfile</I> is found, <B>Privoxy</B> will 
-fail to start.
-<A NAME="lbAE">&nbsp;</A>
-<H2>DESCRIPTION</H2>
-
-<P>
-
-Privoxy is a non-caching web proxy with advanced filtering capabilities
-for enhancing privacy, modifying web page data and HTTP headers, controlling
-access, and removing ads and other obnoxious Internet junk. Privoxy has a
-flexible configuration and can be customized to suit individual needs and tastes.
-It has application for both stand-alone systems and multi-user networks.
-<P>
-
-Privoxy is Free Software and licensed under the GPL2.
-<A NAME="lbAF">&nbsp;</A>
-<H2>INSTALLATION AND USAGE</H2>
-
-<P>
-
-Browsers can either be individually configured to use
-<B>Privoxy</B> as a HTTP proxy (recommended),
-or <B>Privoxy</B> can be combined with a packet
-filter to build an intercepting proxy
-(see <I>config</I>).  The default setting is  for
-localhost,  on port  8118 (configurable in the main config file).  To set the
-HTTP proxy in Firefox, go through: <B>Tools</B>; 
-<B>Options</B>; <B>General</B>;
-<B>Connection Settings</B>;
-<B>Manual Proxy Configuration</B>. 
-<P>
-
-For Internet Explorer, go through: <B>Tools</B>; 
-<B>Internet Properties</B>; <B>Connections</B>;
-<B>LAN Settings</B>. 
-<P>
-
-The Secure (SSL) Proxy should also be set to the same values, otherwise
-https: URLs will not be proxied. Note: <B>Privoxy</B> can only
-proxy HTTP and HTTPS traffic. Do not try it with FTP or other protocols.
-HTTPS presents some limitations, and not all features will work with HTTPS 
-connections.
-<P>
-
-For other browsers, check the documentation.
-<A NAME="lbAG">&nbsp;</A>
-<H2>CONFIGURATION</H2>
-
-<P>
-
-<B>Privoxy</B> can be configured with the various configuration
-files. The default configuration files are: <I>config</I>,
-<I>default.filter</I>, <I>default.action</I> and
-<I>default.action</I>. <I>user.action</I> should 
-be used for locally defined exceptions to the default rules in
-<I>match-all.action</I> and <I>default.action</I>,
-and <I>user.filter</I> for locally defined filters. These are
-well commented.  On Unix and Unix-like systems, these are located in
-<I>/etc/privoxy/</I> by default. 
-<P>
-
-<B>Privoxy</B> uses the concept of <B>actions</B> 
-in order to manipulate the data stream between the browser and remote sites.
-There are various actions available with specific functions for such things 
-as blocking web sites, managing cookies, etc. These actions can be invoked
-individually or combined, and used against individual URLs, or groups of URLs 
-that can be defined using wildcards and regular expressions. The result is
-that the user has greatly enhanced control and freedom.
-<P>
-
-The actions list (ad blocks, etc) can also be configured with your
-web browser at <A HREF="http://config.privoxy.org/";>http://config.privoxy.org/</A> 
-(assuming the configuration allows it).
-<B>Privoxy's</B> configuration parameters  can also  be viewed at
-the same page. In addition, <B>Privoxy</B> can be toggled on/off.
-This is an internal page, and does not require Internet access.
-<P>
-
-See the <I>User Manual</I> for a detailed
-explanation of installation, general usage, all configuration options, new
-features and notes on upgrading.
-<A NAME="lbAH">&nbsp;</A>
-<H2>FILES</H2>
-
-<P>
-<PRE>
- 
- <I>/usr/sbin/privoxy</I>
- <I>/etc/privoxy/config</I>
- <I>/etc/privoxy/match-all.action</I>
- <I>/etc/privoxy/default.action</I>
- <I>/etc/privoxy/user.action</I>
- <I>/etc/privoxy/default.filter</I>
- <I>/etc/privoxy/user.filter</I>
- <I>/etc/privoxy/trust</I>
- <I>/etc/privoxy/templates/*</I>
- <I>/var/log/privoxy/logfile</I>
-</PRE>
-
-<P>
-
-Various other files should be included, but may vary depending on platform
-and build configuration. Additional documentation should be included in the local
-documentation directory.
-<A NAME="lbAI">&nbsp;</A>
-<H2>SIGNALS</H2>
-
-<P>
-
-<B>Privoxy</B> terminates on the <B>SIGINT</B>,
-<B>SIGTERM</B> and <B>SIGABRT</B> signals. Log
-rotation scripts may cause a re-opening of the logfile by sending a 
-<B>SIGHUP</B> to <B>Privoxy</B>. Note that unlike
-other daemons,  <B>Privoxy</B> does not need to be made aware of
-config file changes by <B>SIGHUP</B> -- it will detect them
-automatically. 
-<A NAME="lbAJ">&nbsp;</A>
-<H2>NOTES</H2>
-
-<P>
-
-Please see the <I>User Manual</I> on how to contact the
-developers, for feature requests, reporting problems, and other questions.
-<A NAME="lbAK">&nbsp;</A>
-<H2>SEE ALSO</H2>
-
-<P>
-
-Other references and sites of interest to <B>Privoxy</B>
-users:
-<P>
-
-<P>
-<A HREF="http://www.privoxy.org/";>http://www.privoxy.org/,</A> 
-the <B>Privoxy</B> Home page. 
-<P>
-<A HREF="http://www.privoxy.org/faq/";>http://www.privoxy.org/faq/,</A> 
-the <B>Privoxy</B> FAQ. 
-<P>
-<A HREF="http://www.privoxy.org/developer-manual/";>http://www.privoxy.org/developer-manual/,</A> 
-the <B>Privoxy</B> developer manual. 
-<P>
-<A HREF="https://sourceforge.net/projects/ijbswa/";>https://sourceforge.net/projects/ijbswa/,</A> 
-the Project Page for <B>Privoxy</B> on 
-SourceForge.
-<P>
-<A HREF="http://config.privoxy.org/";>http://config.privoxy.org/,</A>
-the web-based user interface. <B>Privoxy</B> must be
-running for this to work. Shortcut: <A HREF="http://p.p/";>http://p.p/</A>
-<P>
-<A HREF="https://sourceforge.net/tracker/?group_id=11118";>https://sourceforge.net/tracker/?group_id=11118</A>&amp;atid=460288, to submit ``misses'' and other
-configuration related suggestions to the developers. 
-<A NAME="lbAL">&nbsp;</A>
-<H2>DEVELOPMENT TEAM</H2>
-
-<P>
-<PRE>
- Fabian Keil, lead developer
- David Schmidt, developer
-
- Hal Burgiss
- Mark Miller
- Gerry Murphy
- Lee Rian
- Roland Rosenfeld
- J&ouml;rg Strohmayer
-</PRE>
-
-<A NAME="lbAM">&nbsp;</A>
-<H2>COPYRIGHT AND LICENSE</H2>
-
-<A NAME="lbAN">&nbsp;</A>
-<H3>COPYRIGHT</H3>
-
-<P>
-
-Copyright (C) 2001-2009 by Privoxy Developers &lt;<A HREF="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</A>&gt;
-<P>
-
-Some source code is based on code Copyright (C) 1997 by Anonymous Coders
-and Junkbusters, Inc. and licensed under the <I>GNU General Public
-License</I>.
-<A NAME="lbAO">&nbsp;</A>
-<H3>LICENSE</H3>
-
-<P>
-
-<B>Privoxy</B> is free software; you can
-redistribute it and/or modify it under the terms of the 
-<I>GNU General Public License</I>, version 2,
-as published by the Free Software Foundation.
-<P>
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the  <I>GNU General Public License</I> for details.
-<P>
-
-You should have received a copy of the <I>GNU GPL</I>
-along with this program; if not, write to the  Free Software
-Foundation, Inc. 51 Franklin Street, Fifth Floor
-Boston, MA 02110-1301
-USA 
-<P>
-
-<HR>
-<A NAME="index">&nbsp;</A><H2>Index</H2>
-<DL>
-<DT><A HREF="#lbAB">NAME</A><DD>
-<DT><A HREF="#lbAC">SYNOPSIS</A><DD>
-<DT><A HREF="#lbAD">OPTIONS</A><DD>
-<DT><A HREF="#lbAE">DESCRIPTION</A><DD>
-<DT><A HREF="#lbAF">INSTALLATION AND USAGE</A><DD>
-<DT><A HREF="#lbAG">CONFIGURATION</A><DD>
-<DT><A HREF="#lbAH">FILES</A><DD>
-<DT><A HREF="#lbAI">SIGNALS</A><DD>
-<DT><A HREF="#lbAJ">NOTES</A><DD>
-<DT><A HREF="#lbAK">SEE ALSO</A><DD>
-<DT><A HREF="#lbAL">DEVELOPMENT TEAM</A><DD>
-<DT><A HREF="#lbAM">COPYRIGHT AND LICENSE</A><DD>
-<DL>
-<DT><A HREF="#lbAN">COPYRIGHT</A><DD>
-<DT><A HREF="#lbAO">LICENSE</A><DD>
-</DL>
-</DL>
-<HR>
-This document was created by
-man2html,
-using the manual pages.<BR>
-Time: 11:32:52 GMT, March 21, 2009
-</BODY>
-</HTML>
diff --git a/external/privoxy/doc/webserver/p_doc.css b/external/privoxy/doc/webserver/p_doc.css
deleted file mode 100644
index 212610d..0000000
--- a/external/privoxy/doc/webserver/p_doc.css
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * CSS for Privoxy documentation
- *
- * $Id: p_doc.css,v 1.5 2006/09/09 19:13:42 hal9 Exp $
- */
-
-/*
- * Global fonts, colors, margins:
- */ 
-body,td,th { font-family: arial, helvetica, sans-serif; }
-body { margin: 4%; color: #000000; background-color: #eeeeee; }
-
-/*
- * Headings hierarchy in terms of size and color:
- */
-h1 { color: #4c000f; font-size: 160%; }
-h2 { color: #660014; font-size: 140%; }
-h3 { color: #820019; font-size: 120%; }
-h4 { color: #99001d; font-size: 110%; }
-
-/*
- * Make headings stand out:
- * Indent all content in chapters, by additional 2%,
- * and then pull the headings back left.
- */
-div.sect1 { margin-left: 2%; }
-h1,h2,h3,h4 {margin-left: -2%; }
-h1.title { margin-left: 0; }
-h2.subtitle { margin-left: 0; }
-
-/*
- * Underlined links disturb the examples;
- * Let them get darker instead of purple after visited.
- */
-a { text-decoration: none; }
-a:link { color: #0c29ff; }
-a:visited { color: #071899; }
-
-/*
- * Special highlighting:
- * Code examples in embedded in the text flow become half-bold,
- * Emphasis gets h4-red.
- * Warnings get the same bg as in privoxy.css
- */
-tt.literal { font-weight: 600; }
-i.emphasis { color: #99001d; }
-table.warning { border: 0; background-color: #ffdddd;}
-span.guibutton { 
-  white-space: nowrap;
-  width: auto;
-  padding: 2px;
-  background-color: #dddddd;
-  color:            #000000;
-  text-decoration: none;
-  border-top:    1px solid #ffffff;
-  border-left:   1px solid #ffffff;
-  border-bottom: 1px solid #000000;
-  border-right:  1px solid #000000;
-}
-
-/*
- * Misc:
- */
-ul { list-style-type: square; }
-/* Privoxy, of course */
-.application {font-weight: bold; font-size:105%; color: #99001d;}
diff --git a/external/privoxy/doc/webserver/p_feedback.css b/external/privoxy/doc/webserver/p_feedback.css
deleted file mode 100644
index e0b70a7..0000000
--- a/external/privoxy/doc/webserver/p_feedback.css
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Vary the gereneral Privoxy Stlyesheet to
- * meet the needs of small popups:
- *
- * $Id: p_feedback.css,v 1.4 2002/04/09 13:03:42 oes Exp $
- */
-body,td,th  { font-size:10px; }
-div.info    { width: 60%; }
-div.warning { width: 60%; text-align: left; } 
diff --git a/external/privoxy/doc/webserver/privoxy-index.html b/external/privoxy/doc/webserver/privoxy-index.html
deleted file mode 100644
index 22cec35..0000000
--- a/external/privoxy/doc/webserver/privoxy-index.html
+++ /dev/null
@@ -1,283 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy - The Privacy Enhancing Proxy</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><META
-NAME="KEYWORD"
-CONTENT="privoxy"><META
-NAME="KEYWORD"
-CONTENT="HTTP"><META
-NAME="KEYWORD"
-CONTENT="proxy"><META
-NAME="KEYWORD"
-CONTENT="privacy"><META
-NAME="KEYWORD"
-CONTENT="popups"><META
-NAME="KEYWORD"
-CONTENT="po-ups"><META
-NAME="KEYWORD"
-CONTENT="HTML"><META
-NAME="KEYWORD"
-CONTENT="JavaScript"><META
-NAME="KEYWORD"
-CONTENT="cleaning"><META
-NAME="KEYWORD"
-CONTENT="blocking"><META
-NAME="KEYWORD"
-CONTENT="cleaner"><META
-NAME="KEYWORD"
-CONTENT="blocker"><META
-NAME="KEYWORD"
-CONTENT="filter"><META
-NAME="KEYWORD"
-CONTENT="proxy"><META
-NAME="KEYWORD"
-CONTENT="junk"><META
-NAME="KEYWORD"
-CONTENT="ad"><META
-NAME="KEYWORD"
-CONTENT="advertisement"><META
-NAME="KEYWORD"
-CONTENT="banner"><META
-NAME="KEYWORD"
-CONTENT="webbugs"><META
-NAME="KEYWORD"
-CONTENT="web-bugs"><META
-NAME="KEYWORD"
-CONTENT="werbung"><META
-NAME="KEYWORD"
-CONTENT="junkbusters"><META
-NAME="KEYWORD"
-CONTENT="junkbuster"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<meta name="description" content="Privoxy helps users to protect their privacy.">
-<meta name="MSSmartTagsPreventParsing" content="TRUE"></HEAD
-><BODY
-CLASS="ARTICLE"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="ARTICLE"
-><DIV
-CLASS="TITLEPAGE"
-><H1
-CLASS="TITLE"
-><A
-NAME="AEN2"
->Privoxy - The Privacy Enhancing Proxy</A
-></H1
-><H2
-CLASS="SUBTITLE"
->Project Index Page v3.0.12</H2
-><DIV
-><DIV
-CLASS="ABSTRACT"
-><P
-></P
-><A
-NAME="AEN29"
-></A
-><P
-> Privoxy is a non-caching web proxy with advanced filtering capabilities
- for enhancing privacy, modifying web page data and HTTP headers, controlling
- access, and removing ads and other obnoxious Internet junk. Privoxy has a
- flexible configuration and can be customized to suit individual needs and tastes.
- It has application for both stand-alone systems and multi-user networks.</P
-><P
-> Privoxy is Free Software and licensed under the GPL2.</P
-><P
-> Privoxy is an associated project of Software in the Public Interest (SPI).
- <A
-HREF="http://www.privoxy.org/faq/general.html#DONATE";
-TARGET="_top"
->Donations are welcome</A
->.</P
-><P
-></P
-></DIV
-></DIV
-><HR></DIV
-><DIV
-CLASS="SECT1"
-><H3
-CLASS="SECT1"
-><A
-NAME="DOWNLOAD"
->Download</A
-></H3
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="https://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->Download recent releases</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/quickstart.html"
-TARGET="_top"
->Quickstart after installation</A
->
-   </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT1"
-><HR><H3
-CLASS="SECT1"
-><A
-NAME="DOCS"
->Documentation</A
-></H3
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="user-manual/index.html"
-TARGET="_top"
->User manual</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="faq/index.html"
-TARGET="_top"
->Frequently Asked Questions</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="developer-manual/index.html"
-TARGET="_top"
->Developer Manual</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="man-page/privoxy-man-page.html"
-TARGET="_top"
->Classic Man Page</A
->
-   </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT1"
-><HR><H3
-CLASS="SECT1"
-><A
-NAME="MOREINFO"
->More information</A
-></H3
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="user-manual/contact.html"
-TARGET="_top"
->Support &#38; Service</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/copyright.html"
-TARGET="_top"
->Copyright, License, History &#38; Authors</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/introduction.html#FEATURES"
-TARGET="_top"
->List of (new) Features</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="https://sourceforge.net/projects/ijbswa/";
-TARGET="_top"
->The project page</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="user-manual/seealso.html"
-TARGET="_top"
->Related links</A
->
-   </P
-></LI
-><LI
-><P
->    
-    
-    <A
-HREF="http://privoxy.org/team/index.html";
-TARGET="_top"
->Pictures of the Privoxy Team</A
->
-   </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="SECT1"
-><HR><H2
-CLASS="SECT1"
-><A
-NAME="AEN82"
-></A
-></H2
-><P
-> <SUB
->  Copyright &copy; 2001-2009 by Privoxy Developers
- </SUB
-></P
-></DIV
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/privoxy.css b/external/privoxy/doc/webserver/privoxy.css
deleted file mode 100644
index b08cc4d..0000000
--- a/external/privoxy/doc/webserver/privoxy.css
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * CSS for Privoxy CGI and script output
- *
- * $Id: privoxy.css,v 1.2 2002/04/09 11:55:20 oes Exp $
- */
-
-/*
- * General rules: Font, Color, Headings, Margins, Links
- */
-body,td,th { font-family: arial, helvetica, helv, sans-serif; }
-body { background-color: #ffffff; color: #000000; }
-
-h1 { font-size: 140%; margin: 0px; }
-h2 { font-size: 120%; margin: 0px; }
-h3 { font-size: 110%; margin: 0px; }
-
-p,pre  { margin-left: 15px; }
-li { margin: 2px 15px; }
-dl { margin: 2px 15px; }
-
-a:link    { color: #0000dd; text-decoration: none; }
-a:visited { color: #330099; text-decoration: none; }
-a:active  { color: #3333ff; text-decoration: none; }
-
-/*
- * Boxen as Table elements:
- */
-td.title   { border: solid black 1px; background-color: #dddddd; }
-td.box     { border: solid black 1px; background-color: #eeeeee; }
-td.info    { border: solid black 1px; background-color: #ccccff; }
-td.warning { border: solid black 1px; background-color: #ffdddd; }
-
-/*
- * Special Table Boxen: for nesting, naked container and for
- * the Status field in CGI Output:
- */
-td.wrapbox { border: solid black 1px; padding: 5px; }
-td.container { padding: 0px; }
-td.status  { border: solid black 1px; background-color: #ff0000; color: #ffffff; font-size: 300%; font-weight: bolder; }
-
-/*
- * Same Boxen as <div>s:
- */
-div.title    { border: solid black 1px; background-color: #dddddd; margin: 20px; padding: 20px; }
-div.box      { border: solid black 1px; background-color: #eeeeee; margin: 20px; padding: 20px; }
-div.info     { border: solid black 1px; background-color: #ccccff; margin: 20px; padding: 20px; }
-div.warning  { border: solid black 1px; background-color: #ffdddd; margin: 20px; padding: 20px; }
-div.wrapbox  { border: solid black 1px;                            margin: 20px; padding:  5px; }
-
-
-/*
- * Bold definitions in <dl>s, Grey BG for Table headings
- */
-dt { font-weight: bold; }
-th { background-color: #dddddd; }
-
-/*
- * Special purpose paragraphs: Small for page footers,
- * Important for quoting wrong or dangerous examples,
- * Whiteframed for the toggle?mini=y CGI
- */
-p.small { font-size: 10px; margin: 0px; }
-p.important { border: solid black 1px; background-color: #ffdddd; font-weight: bold; padding: 2px; }
-p.whiteframed { margin: 5px; padding: 5px; border: solid black 1px; text-align: center; background-color: #eeeeee; }
-
-/*
- * Special red emphasis:
- */
-em.warning { color: #ff0000 }
diff --git a/external/privoxy/doc/webserver/robots.txt b/external/privoxy/doc/webserver/robots.txt
deleted file mode 100644
index a9941db..0000000
--- a/external/privoxy/doc/webserver/robots.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-# This is the Privoxy web site.
-#
-# If the robot is connecting through Privoxy, then the
-# control interface is at /config.   It isn't very useful
-# to index it, and you're likely to break stuff.  So go away!
-#
-# Even if you're not connected through Privoxy, the 
-# one "Privoxy is not working" page there is not very
-# interesting.
-
-User-agent: *
-Disallow: /config/
-Disallow: /actions/
-Disallow: /submit/
-
-
-
diff --git a/external/privoxy/doc/webserver/team/01stefanw.jpg b/external/privoxy/doc/webserver/team/01stefanw.jpg
deleted file mode 100644
index 920dece..0000000
Binary files a/external/privoxy/doc/webserver/team/01stefanw.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/01stefanw_t.jpg b/external/privoxy/doc/webserver/team/01stefanw_t.jpg
deleted file mode 100644
index 5a90642..0000000
Binary files a/external/privoxy/doc/webserver/team/01stefanw_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/02jon.jpg b/external/privoxy/doc/webserver/team/02jon.jpg
deleted file mode 100644
index 136b2dd..0000000
Binary files a/external/privoxy/doc/webserver/team/02jon.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/02jon_t.jpg b/external/privoxy/doc/webserver/team/02jon_t.jpg
deleted file mode 100644
index 32e470b..0000000
Binary files a/external/privoxy/doc/webserver/team/02jon_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/03andreas.jpg b/external/privoxy/doc/webserver/team/03andreas.jpg
deleted file mode 100644
index 78dc102..0000000
Binary files a/external/privoxy/doc/webserver/team/03andreas.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/03andreas_t.jpg b/external/privoxy/doc/webserver/team/03andreas_t.jpg
deleted file mode 100644
index e23f580..0000000
Binary files a/external/privoxy/doc/webserver/team/03andreas_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/04rodney.jpg b/external/privoxy/doc/webserver/team/04rodney.jpg
deleted file mode 100644
index bb4e02d..0000000
Binary files a/external/privoxy/doc/webserver/team/04rodney.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/04rodney_t.jpg b/external/privoxy/doc/webserver/team/04rodney_t.jpg
deleted file mode 100644
index bba4f15..0000000
Binary files a/external/privoxy/doc/webserver/team/04rodney_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/05david.jpg b/external/privoxy/doc/webserver/team/05david.jpg
deleted file mode 100644
index 429723f..0000000
Binary files a/external/privoxy/doc/webserver/team/05david.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/05david_t.jpg b/external/privoxy/doc/webserver/team/05david_t.jpg
deleted file mode 100644
index c04aa55..0000000
Binary files a/external/privoxy/doc/webserver/team/05david_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/05member.jpg b/external/privoxy/doc/webserver/team/05member.jpg
deleted file mode 100644
index 97042aa..0000000
Binary files a/external/privoxy/doc/webserver/team/05member.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/05member_t.jpg b/external/privoxy/doc/webserver/team/05member_t.jpg
deleted file mode 100644
index c9ffd9b..0000000
Binary files a/external/privoxy/doc/webserver/team/05member_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/06member.jpg b/external/privoxy/doc/webserver/team/06member.jpg
deleted file mode 100644
index 97042aa..0000000
Binary files a/external/privoxy/doc/webserver/team/06member.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/06member_t.jpg b/external/privoxy/doc/webserver/team/06member_t.jpg
deleted file mode 100644
index c9ffd9b..0000000
Binary files a/external/privoxy/doc/webserver/team/06member_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/07member.jpg b/external/privoxy/doc/webserver/team/07member.jpg
deleted file mode 100644
index 97042aa..0000000
Binary files a/external/privoxy/doc/webserver/team/07member.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/07member_t.jpg b/external/privoxy/doc/webserver/team/07member_t.jpg
deleted file mode 100644
index c9ffd9b..0000000
Binary files a/external/privoxy/doc/webserver/team/07member_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/08member.jpg b/external/privoxy/doc/webserver/team/08member.jpg
deleted file mode 100644
index 97042aa..0000000
Binary files a/external/privoxy/doc/webserver/team/08member.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/08member_t.jpg b/external/privoxy/doc/webserver/team/08member_t.jpg
deleted file mode 100644
index c9ffd9b..0000000
Binary files a/external/privoxy/doc/webserver/team/08member_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/20member.jpg b/external/privoxy/doc/webserver/team/20member.jpg
deleted file mode 100644
index 97042aa..0000000
Binary files a/external/privoxy/doc/webserver/team/20member.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/20member_t.jpg b/external/privoxy/doc/webserver/team/20member_t.jpg
deleted file mode 100644
index c9ffd9b..0000000
Binary files a/external/privoxy/doc/webserver/team/20member_t.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/team/index.html b/external/privoxy/doc/webserver/team/index.html
deleted file mode 100644
index 2903bcf..0000000
--- a/external/privoxy/doc/webserver/team/index.html
+++ /dev/null
@@ -1,26 +0,0 @@
-<html>
- <head>
-  <meta http-equiv="Content-Type"content="text/html; charset=iso-8859-1">
-  <title>Privoxy - Team Photos</title>
-  <link rel="stylesheet" type="text/css" href="../p_doc.css">
- </head>
- <body>
-  <h1 style="margin-left: 0%">Privoxy - Team Photos</h1>
-  <hr>
-  <p>In our day jobs, we're all models ;-)</p>
-  <table align="center">
-   <tr>
-    <td><a href="01stefanw.jpg"><img src="01stefanw_t.jpg"  width="80" height="80" border="0" title="Stefan Waldherr"></a></td>
-    <td><a href="02jon.jpg"><img src="02jon_t.jpg"  width="80" height="80" border="0" title="Jon Foster"></a></td>
-    <td><a href="03andreas.jpg"><img src="03andreas_t.jpg"  width="80" height="80" border="0" title="Andreas Oesterhelt"></a></td>
-    <td><a href="04rodney.jpg"><img src="04rodney_t.jpg"  width="80" height="80" border="0" title="Rodney Stromlund"></a></td>
-   </tr>
-   <tr>
-    <td><a href="05david.jpg"><img src="05david_t.jpg"  width="80" height="80" border="0" title="David Schmidt"></a></td>
-    <td><a href="06member.jpg"><img src="06member_t.jpg"  width="80" height="80" border="0" title="N/A"></a></td>
-    <td><a href="07member.jpg"><img src="07member_t.jpg"  width="80" height="80" border="0" title="N/A"></a></td>
-    <td><a href="08member.jpg"><img src="08member_t.jpg"  width="80" height="80" border="0" title="N/A"></a></td>
-   </tr>
-  </table>
- </body>
-</html>
diff --git a/external/privoxy/doc/webserver/user-manual/actions-file.html b/external/privoxy/doc/webserver/user-manual/actions-file.html
deleted file mode 100644
index be87aa7..0000000
--- a/external/privoxy/doc/webserver/user-manual/actions-file.html
+++ /dev/null
@@ -1,8214 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Actions Files</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="The Main Configuration File"
-HREF="config.html"><LINK
-REL="NEXT"
-TITLE="Filter Files"
-HREF="filter-file.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="config.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="filter-file.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="ACTIONS-FILE"
->8. Actions Files</A
-></H1
-><P
-> The actions files are used to define what <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->actions</I
-></SPAN
->
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> takes for which URLs, and thus determines
- how ad images, cookies and various other aspects of HTTP content and
- transactions are handled, and on which sites (or even parts thereof). 
- There are a number of such actions, with a wide range of functionality.
- Each action does something a little different.
- These actions give us a veritable arsenal of tools with which to exert 
- our control, preferences and independence. Actions can be combined so that 
- their effects are aggregated when applied against a given set of URLs.</P
-><P
-> There 
- are three action files included with <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with
- differing purposes:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <TT
-CLASS="FILENAME"
->match-all.action</TT
-> - is used to define which
-    <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> relating to banner-blocking, images, pop-ups,
-    content modification, cookie handling etc should be applied by default.
-    It should be the first actions file loaded
-   </P
-></LI
-><LI
-><P
->    <TT
-CLASS="FILENAME"
->default.action</TT
-> - defines many exceptions (both
-    positive and negative) from the default set of actions that's configured
-    in <TT
-CLASS="FILENAME"
->match-all.action</TT
->. It is a set of rules that should
-    work reasonably well as-is for most users. This file is only supposed to
-    be edited by the developers. It should be the second actions file loaded.
-   </P
-></LI
-><LI
-><P
->    <TT
-CLASS="FILENAME"
->user.action</TT
-> - is intended to be for local site 
-    preferences and exceptions. As an example, if your ISP or your bank
-    has specific requirements, and need special handling, this kind of 
-    thing should go here. This file will not be upgraded.
-   </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
->  <SPAN
-CLASS="GUIBUTTON"
->Set to Cautious</SPAN
-> <SPAN
-CLASS="GUIBUTTON"
->Set to Medium</SPAN
->  <SPAN
-CLASS="GUIBUTTON"
->Set to Advanced</SPAN
->
-   </P
-><P
->    These have increasing levels of aggressiveness <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and have no
-    influence on your browsing unless you select them explicitly in the
-    editor</I
-></SPAN
->. A default installation should be pre-set to 
-    <TT
-CLASS="LITERAL"
->Cautious</TT
->. New users should try this for a while before
-    adjusting the settings to more aggressive levels. The more aggressive 
-    the settings, then the more likelihood there is of problems such as sites 
-    not working as they should.
-   </P
-><P
->    The <SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
-> button allows you to turn each 
-    action on/off individually for fine-tuning. The <SPAN
-CLASS="GUIBUTTON"
->Cautious</SPAN
->
-    button changes the actions list to low/safe settings which will activate 
-    ad blocking and a minimal set of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s features, and subsequently
-    there will be less of a chance for accidental problems. The
-    <SPAN
-CLASS="GUIBUTTON"
->Medium</SPAN
-> button sets the list to a medium level of
-    other features and a low level set of privacy features. The
-    <SPAN
-CLASS="GUIBUTTON"
->Advanced</SPAN
-> button sets the list to a high level of
-    ad blocking and medium level of privacy. See the chart below. The latter
-    three buttons over-ride any changes via with the
-    <SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
-> button. More fine-tuning can be done in the
-    lower sections of this internal page.
-   </P
-><P
->    While the actions file editor allows to enable these settings in all
-    actions files, they are only supposed to be enabled in the first one
-    to make sure you don't unintentionally overrule earlier rules.
-   </P
-><P
->    The default profiles, and their associated actions, as pre-defined in
-    <TT
-CLASS="FILENAME"
->default.action</TT
-> are:
-   </P
-><P
->    <DIV
-CLASS="TABLE"
-><A
-NAME="AEN2189"
-></A
-><P
-><B
->Table 1. Default Configurations</B
-></P
-><TABLE
-BORDER="1"
-FRAME="border"
-RULES="all"
-CLASS="CALSTABLE"
-><COL
-WIDTH="1*"
-TITLE="C1"><COL
-WIDTH="1*"
-TITLE="C2"><COL
-WIDTH="1*"
-TITLE="C3"><COL
-WIDTH="1*"
-TITLE="C4"><THEAD
-><TR
-><TH
->Feature</TH
-><TH
->Cautious</TH
-><TH
->Medium</TH
-><TH
->Advanced</TH
-></TR
-></THEAD
-><TBODY
-><TR
-><TD
->Ad-blocking Aggressiveness</TD
-><TD
->medium</TD
-><TD
->high</TD
-><TD
->high</TD
-></TR
-><TR
-><TD
->Ad-filtering by size</TD
-><TD
->no</TD
-><TD
->yes</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->Ad-filtering by link</TD
-><TD
->no</TD
-><TD
->no</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->Pop-up killing</TD
-><TD
->blocks only</TD
-><TD
->blocks only</TD
-><TD
->blocks only</TD
-></TR
-><TR
-><TD
->Privacy Features</TD
-><TD
->low</TD
-><TD
->medium</TD
-><TD
->medium/high</TD
-></TR
-><TR
-><TD
->Cookie handling</TD
-><TD
->none</TD
-><TD
->session-only</TD
-><TD
->kill</TD
-></TR
-><TR
-><TD
->Referer forging</TD
-><TD
->no</TD
-><TD
->yes</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->GIF de-animation</TD
-><TD
->no</TD
-><TD
->yes</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->Fast redirects</TD
-><TD
->no</TD
-><TD
->no</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->HTML taming</TD
-><TD
->no</TD
-><TD
->no</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->JavaScript taming</TD
-><TD
->no</TD
-><TD
->no</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->Web-bug killing</TD
-><TD
->no</TD
-><TD
->yes</TD
-><TD
->yes</TD
-></TR
-><TR
-><TD
->Image tag reordering</TD
-><TD
->no</TD
-><TD
->yes</TD
-><TD
->yes</TD
-></TR
-></TBODY
-></TABLE
-></DIV
->
-    </P
-></LI
-></UL
-></P
-><P
-> The list of actions files to be used are defined in the main configuration 
- file, and are processed in the order they are defined (e.g.
- <TT
-CLASS="FILENAME"
->default.action</TT
-> is typically processed before
- <TT
-CLASS="FILENAME"
->user.action</TT
->). The content of these can all be viewed and
- edited from <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->.
- The over-riding principle when applying actions, is that the last action that
- matches a given URL wins. The broadest, most general rules go first
- (defined in <TT
-CLASS="FILENAME"
->default.action</TT
->),
- followed by any exceptions (typically also in
- <TT
-CLASS="FILENAME"
->default.action</TT
->), which are then followed lastly by any
- local preferences (typically in <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->user</I
-></SPAN
-><TT
-CLASS="FILENAME"
->.action</TT
->). 
- Generally, <TT
-CLASS="FILENAME"
->user.action</TT
-> has the last word.
- </P
-><P
-> An actions file typically has multiple sections. If you want to use
- <SPAN
-CLASS="QUOTE"
->"aliases"</SPAN
-> in an actions file, you have to place the (optional)
- <A
-HREF="actions-file.html#ALIASES"
->alias section</A
-> at the top of that file.
- Then comes the default set of rules which will apply universally to all
- sites and pages (be <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->very careful</I
-></SPAN
-> with using such a
- universal set in <TT
-CLASS="FILENAME"
->user.action</TT
-> or any other actions file after 
- <TT
-CLASS="FILENAME"
->default.action</TT
->, because it will override the result
- from consulting any previous file). And then below that,
- exceptions to the defined universal policies. You can regard
- <TT
-CLASS="FILENAME"
->user.action</TT
-> as an appendix to <TT
-CLASS="FILENAME"
->default.action</TT
->,
- with the advantage that it is a separate file, which makes preserving your
- personal settings across <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> upgrades easier.</P
-><P
-> 
- Actions can be used to block anything you want, including ads, banners, or
- just some obnoxious URL whose content you would rather not see. Cookies can be accepted
- or rejected, or accepted only during the current browser session (i.e. not
- written to disk), content can be modified, some JavaScripts tamed, user-tracking
- fooled, and much more. See below for a <A
-HREF="actions-file.html#ACTIONS"
->complete list
- of actions</A
->.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN2288"
->8.1. Finding the Right Mix</A
-></H2
-><P
-> Note that some <A
-HREF="actions-file.html#ACTIONS"
->actions</A
->, like cookie suppression
- or script disabling, may render some sites unusable that rely on these
- techniques to work properly. Finding the right mix of actions is not always easy and
- certainly a matter of personal taste. And, things can always change, requiring 
- refinements in the configuration. In general, it can be said that the more
- <SPAN
-CLASS="QUOTE"
->"aggressive"</SPAN
-> your default settings (in the top section of the
- actions file) are, the more exceptions for <SPAN
-CLASS="QUOTE"
->"trusted"</SPAN
-> sites you
- will have to make later. If, for example, you want to crunch all cookies per
- default, you'll have to make exceptions from that rule for sites that you
- regularly use and that require cookies for actually useful purposes, like maybe
- your bank, favorite shop, or newspaper.</P
-><P
-> We have tried to provide you with reasonable rules to start from in the
- distribution actions files. But there is no general rule of thumb on these
- things. There just are too many variables, and sites are constantly changing.
- Sooner or later you will want to change the rules (and read this chapter again :).</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN2295"
->8.2. How to Edit</A
-></H2
-><P
-> The easiest way to edit the actions files is with a browser by
- using our browser-based editor, which can be reached from <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->.
- Note: the config file option <A
-HREF="config.html#ENABLE-EDIT-ACTIONS"
->enable-edit-actions</A
-> must be enabled for
- this to work. The editor allows both fine-grained control over every single
- feature on a per-URL basis, and easy choosing from wholesale sets of defaults
- like <SPAN
-CLASS="QUOTE"
->"Cautious"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"Medium"</SPAN
-> or
- <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
->. Warning: the <SPAN
-CLASS="QUOTE"
->"Advanced"</SPAN
-> setting is more
- aggressive, and will be more likely to cause problems for some sites.
- Experienced users only! 
- </P
-><P
-> If you prefer plain text editing to GUIs, you can of course also directly edit the
- the actions files with your favorite text editor. Look at
- <TT
-CLASS="FILENAME"
->default.action</TT
-> which is richly commented with many 
- good examples.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="ACTIONS-APPLY"
->8.3. How Actions are Applied to Requests</A
-></H2
-><P
-> Actions files are divided into sections. There are special sections,
- like the <SPAN
-CLASS="QUOTE"
->"<A
-HREF="actions-file.html#ALIASES"
->alias</A
->"</SPAN
-> sections which will
- be discussed later. For now let's concentrate on regular sections: They have a
- heading line (often split up to multiple lines for readability) which consist
- of a list of actions, separated by whitespace and enclosed in curly braces.
- Below that, there is a list of URL and tag patterns, each on a separate line.</P
-><P
-> To determine which actions apply to a request, the URL of the request is
- compared to all URL patterns in each <SPAN
-CLASS="QUOTE"
->"action file"</SPAN
->.
- Every time it matches, the list of applicable actions for the request is
- incrementally updated, using the heading of the section in which the
- pattern is located. The same is done again for tags and tag patterns later on.</P
-><P
-> If multiple applying sections set the same action differently,
- the last match wins. If not, the effects are aggregated.
- E.g. a URL might match a regular section with a heading line of <TT
-CLASS="LITERAL"
->{ 
- +<A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-> }</TT
->,
- then later another one with just <TT
-CLASS="LITERAL"
->{
- +<A
-HREF="actions-file.html#BLOCK"
->block</A
-> }</TT
->, resulting
- in <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
-> actions to apply. And there may well be 
- cases where you will want to combine actions together. Such a section then 
- might look like:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  { +<TT
-CLASS="LITERAL"
->handle-as-image</TT
->  +<TT
-CLASS="LITERAL"
->block{Banner ads.}</TT
-> }
-  # Block these as if they were images. Send no block page.
-   banners.example.com
-   media.example.com/.*banners
-   .example.com/images/ads/</PRE
-></TD
-></TR
-></TABLE
->
- </P
-><P
-> You can trace this process for URL patterns and any given URL by visiting <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->http://config.privoxy.org/show-url-info</A
->.</P
-><P
-> Examples and more detail on this is provided in the Appendix, <A
-HREF="appendix.html#ACTIONSANAT"
-> Troubleshooting: Anatomy of an Action</A
-> section.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AF-PATTERNS"
->8.4. Patterns</A
-></H2
-><P
-> 
- As mentioned, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> uses <SPAN
-CLASS="QUOTE"
->"patterns"</SPAN
->
- to determine what <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->actions</I
-></SPAN
-> might apply to which sites and
- pages your browser attempts to access. These <SPAN
-CLASS="QUOTE"
->"patterns"</SPAN
-> use wild
- card type <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->pattern</I
-></SPAN
-> matching to achieve a high degree of
- flexibility. This allows one expression to be expanded and potentially match
- against many similar patterns.</P
-><P
-> Generally, an URL pattern has the form
- <TT
-CLASS="LITERAL"
->&#60;domain&#62;/&#60;path&#62;</TT
->, where both the
- <TT
-CLASS="LITERAL"
->&#60;domain&#62;</TT
-> and <TT
-CLASS="LITERAL"
->&#60;path&#62;</TT
-> are
- optional. (This is why the special <TT
-CLASS="LITERAL"
->/</TT
-> pattern matches all
- URLs). Note that the protocol portion of the URL pattern (e.g.
- <TT
-CLASS="LITERAL"
->http://</TT
->) should <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> be included in
- the pattern. This is assumed already!</P
-><P
-> The pattern matching syntax is different for the domain and path parts of
- the URL. The domain part uses a simple globbing type matching technique, 
- while the path part uses more flexible 
- <A
-HREF="http://en.wikipedia.org/wiki/Regular_expressions";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"Regular
-  Expressions"</SPAN
-></A
-> (POSIX 1003.2).</P
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
-><TT
-CLASS="LITERAL"
->www.example.com/</TT
-></DT
-><DD
-><P
->    is a domain-only pattern and will match any request to <TT
-CLASS="LITERAL"
->www.example.com</TT
->,
-    regardless of which document on that server is requested. So ALL pages in
-    this domain would be covered by the scope of this action. Note that a 
-    simple <TT
-CLASS="LITERAL"
->example.com</TT
-> is different and would NOT match.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->www.example.com</TT
-></DT
-><DD
-><P
->    means exactly the same. For domain-only patterns, the trailing <TT
-CLASS="LITERAL"
->/</TT
-> may
-    be omitted.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->www.example.com/index.html</TT
-></DT
-><DD
-><P
->    matches all the documents on <TT
-CLASS="LITERAL"
->www.example.com</TT
->
-    whose name starts with <TT
-CLASS="LITERAL"
->/index.html</TT
->.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->www.example.com/index.html$</TT
-></DT
-><DD
-><P
->    matches only the single document <TT
-CLASS="LITERAL"
->/index.html</TT
->
-    on <TT
-CLASS="LITERAL"
->www.example.com</TT
->.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->/index.html$</TT
-></DT
-><DD
-><P
->    matches the document <TT
-CLASS="LITERAL"
->/index.html</TT
->, regardless of the domain,
-    i.e. on <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->any</I
-></SPAN
-> web server anywhere.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->index.html</TT
-></DT
-><DD
-><P
->    matches nothing, since it would be interpreted as a domain name and
-    there is no top-level domain called <TT
-CLASS="LITERAL"
->.html</TT
->. So its 
-    a mistake.
-   </P
-></DD
-></DL
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="AEN2386"
->8.4.1. The Domain Pattern</A
-></H3
-><P
-> The matching of the domain part offers some flexible options: if the
- domain starts or ends with a dot, it becomes unanchored at that end. 
- For example:</P
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
-><TT
-CLASS="LITERAL"
->.example.com</TT
-></DT
-><DD
-><P
->    matches any domain with first-level domain <TT
-CLASS="LITERAL"
->com</TT
->
-    and second-level domain <TT
-CLASS="LITERAL"
->example</TT
->.
-    For example <TT
-CLASS="LITERAL"
->www.example.com</TT
->,
-    <TT
-CLASS="LITERAL"
->example.com</TT
-> and <TT
-CLASS="LITERAL"
->foo.bar.baz.example.com</TT
->.
-    Note that it wouldn't match if the second-level domain was <TT
-CLASS="LITERAL"
->another-example</TT
->.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->www.</TT
-></DT
-><DD
-><P
->    matches any domain that <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->STARTS</I
-></SPAN
-> with
-    <TT
-CLASS="LITERAL"
->www.</TT
-> (It also matches the domain
-    <TT
-CLASS="LITERAL"
->www</TT
-> but most of the time that doesn't matter.)
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->.example.</TT
-></DT
-><DD
-><P
->    matches any domain that <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->CONTAINS</I
-></SPAN
-> <TT
-CLASS="LITERAL"
->.example.</TT
->.
-    And, by the way, also included would be any files or documents that exist
-    within that domain since no path limitations are specified. (Correctly
-    speaking: It matches any FQDN that contains <TT
-CLASS="LITERAL"
->example</TT
-> as
-    a domain.) This might be <TT
-CLASS="LITERAL"
->www.example.com</TT
->,
-    <TT
-CLASS="LITERAL"
->news.example.de</TT
->, or
-    <TT
-CLASS="LITERAL"
->www.example.net/cgi/testing.pl</TT
-> for instance. All these
-    cases are matched. 
-   </P
-></DD
-></DL
-></DIV
-><P
-> Additionally, there are wild-cards that you can use in the domain names
- themselves. These work similarly to shell globbing type wild-cards:
- <SPAN
-CLASS="QUOTE"
->"*"</SPAN
-> represents zero or more arbitrary characters (this is
- equivalent to the 
- <A
-HREF="http://en.wikipedia.org/wiki/Regular_expressions";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"Regular
- Expression"</SPAN
-></A
-> based syntax of <SPAN
-CLASS="QUOTE"
->".*"</SPAN
->),
- <SPAN
-CLASS="QUOTE"
->"?"</SPAN
->  represents any single character (this is equivalent to the
- regular expression syntax of a simple <SPAN
-CLASS="QUOTE"
->"."</SPAN
->), and you can define
- <SPAN
-CLASS="QUOTE"
->"character classes"</SPAN
-> in square brackets which is similar to 
- the same regular expression technique. All of this can be freely mixed:</P
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
-><TT
-CLASS="LITERAL"
->ad*.example.com</TT
-></DT
-><DD
-><P
->    matches <SPAN
-CLASS="QUOTE"
->"adserver.example.com"</SPAN
->, 
-    <SPAN
-CLASS="QUOTE"
->"ads.example.com"</SPAN
->, etc but not <SPAN
-CLASS="QUOTE"
->"sfads.example.com"</SPAN
->
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->*ad*.example.com</TT
-></DT
-><DD
-><P
->    matches all of the above, and then some.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->.?pix.com</TT
-></DT
-><DD
-><P
->    matches <TT
-CLASS="LITERAL"
->www.ipix.com</TT
->,
-    <TT
-CLASS="LITERAL"
->pictures.epix.com</TT
->, <TT
-CLASS="LITERAL"
->a.b.c.d.e.upix.com</TT
-> etc. 
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->www[1-9a-ez].example.c*</TT
-></DT
-><DD
-><P
->     matches <TT
-CLASS="LITERAL"
->www1.example.com</TT
->, 
-     <TT
-CLASS="LITERAL"
->www4.example.cc</TT
->, <TT
-CLASS="LITERAL"
->wwwd.example.cy</TT
->, 
-     <TT
-CLASS="LITERAL"
->wwwz.example.com</TT
-> etc., but <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> 
-     <TT
-CLASS="LITERAL"
->wwww.example.com</TT
->.
-   </P
-></DD
-></DL
-></DIV
-><P
-> While flexible, this is not the sophistication of full regular expression based syntax.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="AEN2462"
->8.4.2. The Path Pattern</A
-></H3
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> uses <SPAN
-CLASS="QUOTE"
->"modern"</SPAN
-> POSIX 1003.2
-  <A
-HREF="http://en.wikipedia.org/wiki/Regular_expressions";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"Regular
-  Expressions"</SPAN
-></A
-> for matching the path portion (after the slash),
-  and is thus more flexible.</P
-><P
-> There is an <A
-HREF="appendix.html#REGEX"
->Appendix</A
-> with a brief quick-start into regular
- expressions, you also might want to have a look at your operating system's documentation
- on regular expressions (try <TT
-CLASS="LITERAL"
->man re_format</TT
->).</P
-><P
-> Note that the path pattern is automatically left-anchored at the <SPAN
-CLASS="QUOTE"
->"/"</SPAN
->,
- i.e. it matches as if it would start with a <SPAN
-CLASS="QUOTE"
->"^"</SPAN
-> (regular expression speak 
- for the beginning of a line).</P
-><P
-> Please also note that matching in the path is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->CASE INSENSITIVE</I
-></SPAN
->
- by default, but you can switch to case sensitive at any point in the pattern by using the 
- <SPAN
-CLASS="QUOTE"
->"(?-i)"</SPAN
-> switch: <TT
-CLASS="LITERAL"
->www.example.com/(?-i)PaTtErN.*</TT
-> will match
- only documents whose path starts with <TT
-CLASS="LITERAL"
->PaTtErN</TT
-> in
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->exactly</I
-></SPAN
-> this capitalization.</P
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
-><TT
-CLASS="LITERAL"
->.example.com/.*</TT
-></DT
-><DD
-><P
->     Is equivalent to just <SPAN
-CLASS="QUOTE"
->".example.com"</SPAN
->, since any documents 
-     within that domain are matched with or without the <SPAN
-CLASS="QUOTE"
->".*"</SPAN
->
-     regular expression. This is redundant
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->.example.com/.*/index.html$</TT
-></DT
-><DD
-><P
->    Will match any page in the domain of <SPAN
-CLASS="QUOTE"
->"example.com"</SPAN
-> that is
-    named <SPAN
-CLASS="QUOTE"
->"index.html"</SPAN
->, and that is part of some path. For
-    example, it matches <SPAN
-CLASS="QUOTE"
->"www.example.com/testing/index.html"</SPAN
-> but
-    NOT <SPAN
-CLASS="QUOTE"
->"www.example.com/index.html"</SPAN
-> because the regular
-    expression called for at least two <SPAN
-CLASS="QUOTE"
->"/'s"</SPAN
->, thus the path 
-    requirement. It also would match 
-    <SPAN
-CLASS="QUOTE"
->"www.example.com/testing/index_html"</SPAN
->, because of the 
-    special meta-character <SPAN
-CLASS="QUOTE"
->"."</SPAN
->.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->.example.com/(.*/)?index\.html$</TT
-></DT
-><DD
-><P
->    This regular expression is conditional so it will match any page 
-    named <SPAN
-CLASS="QUOTE"
->"index.html"</SPAN
-> regardless of path which in this case can 
-    have one or more <SPAN
-CLASS="QUOTE"
->"/'s"</SPAN
->. And this one must contain exactly 
-    <SPAN
-CLASS="QUOTE"
->".html"</SPAN
-> (but does not have to end with that!).
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->.example.com/(.*/)(ads|banners?|junk)</TT
-></DT
-><DD
-><P
->    This regular expression will match any path of <SPAN
-CLASS="QUOTE"
->"example.com"</SPAN
->
-    that contains any of the words <SPAN
-CLASS="QUOTE"
->"ads"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"banner"</SPAN
->, 
-    <SPAN
-CLASS="QUOTE"
->"banners"</SPAN
-> (because of the <SPAN
-CLASS="QUOTE"
->"?"</SPAN
->) or <SPAN
-CLASS="QUOTE"
->"junk"</SPAN
->.
-    The path does not have to end in these words, just contain them.
-   </P
-></DD
-><DT
-><TT
-CLASS="LITERAL"
->.example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$</TT
-></DT
-><DD
-><P
->    This is very much the same as above, except now it must end in either 
-    <SPAN
-CLASS="QUOTE"
->".jpg"</SPAN
->, <SPAN
-CLASS="QUOTE"
->".jpeg"</SPAN
->, <SPAN
-CLASS="QUOTE"
->".gif"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->".png"</SPAN
->. So this 
-    one is limited to common image formats.
-   </P
-></DD
-></DL
-></DIV
-><P
-> There are many, many good examples to be found in <TT
-CLASS="FILENAME"
->default.action</TT
->, 
- and more tutorials below in <A
-HREF="appendix.html#REGEX"
->Appendix on regular expressions</A
->.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="TAG-PATTERN"
->8.4.3. The Tag Pattern</A
-></H3
-><P
-> Tag patterns are used to change the applying actions based on the
- request's tags. Tags can be created with either the
- <A
-HREF="actions-file.html#CLIENT-HEADER-TAGGER"
->client-header-tagger</A
->
- or the  <A
-HREF="actions-file.html#SERVER-HEADER-TAGGER"
->server-header-tagger</A
-> action.</P
-><P
-> Tag patterns have to start with <SPAN
-CLASS="QUOTE"
->"TAG:"</SPAN
->, so <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- can tell them apart from URL patterns. Everything after the colon
- including white space, is interpreted as a regular expression with
- path pattern syntax, except that tag patterns aren't left-anchored
- automatically (<SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> doesn't silently add a <SPAN
-CLASS="QUOTE"
->"^"</SPAN
->,
- you have to do it yourself if you need it).</P
-><P
-> To match all requests that are tagged with <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
->
- your pattern line should be <SPAN
-CLASS="QUOTE"
->"TAG:^foo$"</SPAN
->,
- <SPAN
-CLASS="QUOTE"
->"TAG:foo"</SPAN
-> would work as well, but it would also
- match requests whose tags contain <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
-> somewhere.
- <SPAN
-CLASS="QUOTE"
->"TAG: foo"</SPAN
-> wouldn't work as it requires white space.</P
-><P
-> Sections can contain URL and tag patterns at the same time,
- but tag patterns are checked after the URL patterns and thus
- always overrule them, even if they are located before the URL patterns.</P
-><P
-> Once a new tag is added, Privoxy checks right away if it's matched by one
- of the tag patterns and updates the action settings accordingly. As a result
- tags can be used to activate other tagger actions, as long as these other
- taggers look for headers that haven't already be parsed.</P
-><P
-> For example you could tag client requests which use the
- <TT
-CLASS="LITERAL"
->POST</TT
-> method,
- then use this tag to activate another tagger that adds a tag if cookies
- are sent, and then use a block action based on the cookie tag. This allows
- the outcome of one action, to be input into a subsequent action. However if
- you'd reverse the position of the described taggers, and activated the
- method tagger based on the cookie tagger, no method tags would be created.
- The method tagger would look for the request line, but at the time
- the cookie tag is created, the request line has already been parsed.</P
-><P
-> While this is a limitation you should be aware of, this kind of
- indirection is seldom needed anyway and even the example doesn't
- make too much sense.</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="ACTIONS"
->8.5. Actions</A
-></H2
-><P
-> All actions are disabled by default, until they are explicitly enabled
- somewhere in an actions file. Actions are turned on if preceded with a
- <SPAN
-CLASS="QUOTE"
->"+"</SPAN
->, and turned off if preceded with a <SPAN
-CLASS="QUOTE"
->"-"</SPAN
->. So a
- <TT
-CLASS="LITERAL"
->+action</TT
-> means <SPAN
-CLASS="QUOTE"
->"do that action"</SPAN
->, e.g.
- <TT
-CLASS="LITERAL"
->+block</TT
-> means <SPAN
-CLASS="QUOTE"
->"please block URLs that match the
- following patterns"</SPAN
->, and <TT
-CLASS="LITERAL"
->-block</TT
-> means <SPAN
-CLASS="QUOTE"
->"don't
- block URLs that match the following patterns, even if <TT
-CLASS="LITERAL"
->+block</TT
->
- previously applied."</SPAN
->&#13;</P
-><P
-> 
- Again, actions are invoked by placing them on a line, enclosed in curly braces and
- separated by whitespace, like in 
- <TT
-CLASS="LITERAL"
->{+some-action -some-other-action{some-parameter}}</TT
->,
- followed by a list of URL patterns, one per line, to which they apply.
- Together, the actions line and the following pattern lines make up a section
- of the actions file. </P
-><P
-> 
- Actions fall into three categories:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->  
-   Boolean, i.e the action can only be <SPAN
-CLASS="QUOTE"
->"enabled"</SPAN
-> or
-   <SPAN
-CLASS="QUOTE"
->"disabled"</SPAN
->. Syntax:
-  </P
-><P
->   <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  +<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->        # enable action <TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->
-  -<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->        # disable action <TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
-></PRE
-></TD
-></TR
-></TABLE
->
-  </P
-><P
->  
-   Example: <TT
-CLASS="LITERAL"
->+handle-as-image</TT
->
-  </P
-></LI
-><LI
-><P
->  
-   Parameterized, where some value is required in order to enable this type of action.
-   Syntax:
-  </P
-><P
->   <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  +<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->{<TT
-CLASS="REPLACEABLE"
-><I
->param</I
-></TT
->}  # enable action and set parameter to <TT
-CLASS="REPLACEABLE"
-><I
->param</I
-></TT
->,
-               # overwriting parameter from previous match if necessary
-  -<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->         # disable action. The parameter can be omitted</PRE
-></TD
-></TR
-></TABLE
->
-  </P
-><P
->   Note that if the URL matches multiple positive forms of a parameterized action,
-   the last match wins, i.e. the params from earlier matches are simply ignored.
-  </P
-><P
->  
-   Example: <TT
-CLASS="LITERAL"
->+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.1.4) Gecko/20070602 Firefox/2.0.0.4}</TT
->
-  </P
-></LI
-><LI
-><P
->  
-   Multi-value. These look exactly like parameterized actions,
-   but they behave differently: If the action applies multiple times to the
-   same URL, but with different parameters, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> the parameters
-   from <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> matches are remembered. This is used for actions
-   that can be executed for the same request repeatedly, like adding multiple
-   headers, or filtering through multiple filters. Syntax:
-  </P
-><P
->   <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  +<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->{<TT
-CLASS="REPLACEABLE"
-><I
->param</I
-></TT
->}   # enable action and add <TT
-CLASS="REPLACEABLE"
-><I
->param</I
-></TT
-> to the list of parameters
-  -<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->{<TT
-CLASS="REPLACEABLE"
-><I
->param</I
-></TT
->}   # remove the parameter <TT
-CLASS="REPLACEABLE"
-><I
->param</I
-></TT
-> from the list of parameters
-                # If it was the last one left, disable the action.
-  <TT
-CLASS="REPLACEABLE"
-><I
->-name</I
-></TT
->          # disable this action completely and remove all parameters from the list</PRE
-></TD
-></TR
-></TABLE
->
-  </P
-><P
->  
-   Examples: <TT
-CLASS="LITERAL"
->+add-header{X-Fun-Header: Some text}</TT
-> and
-   <TT
-CLASS="LITERAL"
->+filter{html-annoyances}</TT
->
-  </P
-></LI
-></UL
-></P
-><P
-> If nothing is specified in any actions file, no <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> are
- taken. So in this case <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> would just be a
- normal, non-blocking, non-filtering proxy. You must specifically enable the
- privacy and blocking features you need (although the provided default actions
- files will give a good starting point).</P
-><P
-> Later defined action sections always over-ride earlier ones of the same type.
- So exceptions to any rules you make, should come in the latter part of the file (or 
- in a file that is processed later when using multiple actions files such 
- as <TT
-CLASS="FILENAME"
->user.action</TT
->). For multi-valued actions, the actions
- are applied in the order they are specified. Actions files are processed in
- the order they are defined in <TT
-CLASS="FILENAME"
->config</TT
-> (the default
- installation has three actions files). It also quite possible for any given
- URL to match more than one <SPAN
-CLASS="QUOTE"
->"pattern"</SPAN
-> (because of wildcards and
- regular expressions), and thus to trigger more than one set of actions! Last
- match wins.</P
-><P
-> The list of valid <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> actions are:</P
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ADD-HEADER"
->8.5.1. add-header</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Confuse log analysis, custom applications</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Sends a user defined HTTP header to the web server.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Multi-value.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Any string value is possible. Validity of the defined HTTP headers is not checked.
-    It is recommended that you use the <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->X-</TT
->"</SPAN
-> prefix
-    for custom headers.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This action may be specified multiple times, in order to define multiple 
-    headers. This is rarely needed for the typical user. If you don't know what 
-    <SPAN
-CLASS="QUOTE"
->"HTTP headers"</SPAN
-> are, you definitely don't need to worry about this 
-    one.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+add-header{X-User-Tracking: sucks}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="BLOCK"
->8.5.2. block</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Block ads or other unwanted content</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Requests for URLs to which this action applies are blocked, i.e. the
-    requests are trapped by <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and the requested URL is never retrieved,
-    but is answered locally with a substitute page or image, as determined by
-    the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
->,
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></TT
->, and 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT"
->handle-as-empty-document</A
-></TT
-> actions.
-    
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->A block reason that should be given to the user.</P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> sends a special <SPAN
-CLASS="QUOTE"
->"BLOCKED"</SPAN
-> page
-    for requests to blocked pages. This page contains the block reason given as
-    parameter, a link to find out why the block action applies, and a click-through
-    to the blocked content (the latter only if the force feature is available and
-    enabled).
-   </P
-><P
-> 
-    A very important exception occurs if <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
-> 
-    <TT
-CLASS="LITERAL"
->block</TT
-> and <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
->,
-    apply to the same request: it will then be replaced by an image. If 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></TT
->
-    (see below) also applies, the type of image will be determined by its parameter,
-    if not, the standard checkerboard pattern is sent.
-   </P
-><P
->    It is important to understand this process, in order 
-    to understand how <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> deals with 
-    ads and other unwanted content. Blocking is a core feature, and one 
-    upon which various other features depend.
-   </P
-><P
->    The <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
-></TT
->
-    action can perform a very similar task, by <SPAN
-CLASS="QUOTE"
->"blocking"</SPAN
->
-    banner images and other content through rewriting the relevant URLs in the
-    document's HTML source, so they don't get requested in the first place.
-    Note that this is a totally different technique, and it's easy to confuse the two.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{+block{No nasty stuff for you.}}
-# Block and replace with "blocked" page
- .nasty-stuff.example.com
-
-{+block{Doubleclick banners.} +handle-as-image} 
-# Block and replace with image
- .ad.doubleclick.net
- .ads.r.us/banners/
-
-{+block{Layered ads.} +handle-as-empty-document} 
-# Block and then ignore
- adserver.example.net/.*\.js$</PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CHANGE-X-FORWARDED-FOR"
->8.5.3. change-x-forwarded-for</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Improve privacy by not forwarding the source of the request in the HTTP headers.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes the <SPAN
-CLASS="QUOTE"
->"X-Forwarded-For:"</SPAN
-> HTTP header from the client request,
-    or adds a new one.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
-></P
-><UL
-><LI
-><P
-><SPAN
-CLASS="QUOTE"
->"block"</SPAN
-> to delete the header.</P
-></LI
-><LI
-><P
->       <SPAN
-CLASS="QUOTE"
->"add"</SPAN
-> to create the header (or append
-       the client's IP address to an already existing one).
-     </P
-></LI
-></UL
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    It is safe and recommended to use <TT
-CLASS="LITERAL"
->block</TT
->.
-   </P
-><P
->    Forwarding the source address of the request may make
-    sense in some multi-user setups but is also a privacy risk.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+change-x-forwarded-for{block}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CLIENT-HEADER-FILTER"
->8.5.4. client-header-filter</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->   Rewrite or remove single client headers.
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    All client headers to which this action applies are filtered on-the-fly through
-    the specified regular expression based substitutions.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    The name of a client-header filter, as defined in one of the
-    <A
-HREF="filter-file.html"
->filter files</A
->.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Client-header filters are applied to each header on its own, not to
-    all at once. This makes it easier to diagnose problems, but on the downside
-    you can't write filters that only change header x if header y's value is z.
-    You can do that by using tags though.
-   </P
-><P
->    Client-header filters are executed after the other header actions have finished
-    and use their output as input.
-   </P
-><P
->    If the request URL gets changed, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will detect that and use the new
-    one. This can be used to rewrite the request destination behind the client's
-    back, for example to specify a Tor exit relay for certain requests.
-   </P
-><P
->    Please refer to the <A
-HREF="filter-file.html"
->filter file chapter</A
->
-    to learn which client-header filters are available by default, and how to
-    create your own.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Hide Tor exit notation in Host and Referer Headers
-{+client-header-filter{hide-tor-exit-notation}}
-/
-    </PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CLIENT-HEADER-TAGGER"
->8.5.5. client-header-tagger</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->   Block requests based on their headers.
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Client headers to which this action applies are filtered on-the-fly through
-    the specified regular expression based substitutions, the result is used as
-    tag. 
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    The name of a client-header tagger, as defined in one of the
-    <A
-HREF="filter-file.html"
->filter files</A
->.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Client-header taggers are applied to each header on its own,
-    and as the header isn't modified, each tagger <SPAN
-CLASS="QUOTE"
->"sees"</SPAN
->
-    the original.
-   </P
-><P
->    Client-header taggers are the first actions that are executed
-    and their tags can be used to control every other action.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Tag every request with the User-Agent header
-{+client-header-tagger{user-agent}}
-/
-
-# Tagging itself doesn't change the action
-# settings, sections with TAG patterns do:
-#
-# If it's a download agent, use a different forwarding proxy,
-# show the real User-Agent and make sure resume works.
-{+forward-override{forward-socks5 10.0.0.2:2222 .} \
- -hide-if-modified-since      \
- -overwrite-last-modified     \
- -hide-user-agent             \
- -filter                      \
- -deanimate-gifs              \
-}
-TAG:^User-Agent: NetBSD-ftp/
-TAG:^User-Agent: Novell ZYPP Installer
-TAG:^User-Agent: RPM APT-HTTP/
-TAG:^User-Agent: fetch libfetch/
-TAG:^User-Agent: Ubuntu APT-HTTP/
-TAG:^User-Agent: MPlayer/
-    </PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CONTENT-TYPE-OVERWRITE"
->8.5.6. content-type-overwrite</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Stop useless download menus from popping up, or change the browser's rendering mode</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Replaces the <SPAN
-CLASS="QUOTE"
->"Content-Type:"</SPAN
-> HTTP server header.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Any string. 
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The <SPAN
-CLASS="QUOTE"
->"Content-Type:"</SPAN
-> HTTP server header is used by the
-    browser to decide what to do with the document. The value of this
-    header can cause the browser to open a download menu instead of
-    displaying the document by itself, even if the document's format is
-    supported by the browser. 
-   </P
-><P
->    The declared content type can also affect which rendering mode
-    the browser chooses. If XHTML is delivered as <SPAN
-CLASS="QUOTE"
->"text/html"</SPAN
->,
-    many browsers treat it as yet another broken HTML document.
-    If it is send as <SPAN
-CLASS="QUOTE"
->"application/xml"</SPAN
->, browsers with
-    XHTML support will only display it, if the syntax is correct.
-   </P
-><P
->    If you see a web site that proudly uses XHTML buttons, but sets
-    <SPAN
-CLASS="QUOTE"
->"Content-Type: text/html"</SPAN
->, you can use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    to overwrite it with <SPAN
-CLASS="QUOTE"
->"application/xml"</SPAN
-> and validate
-    the web master's claim inside your XHTML-supporting browser.
-    If the syntax is incorrect, the browser will complain loudly. 
-   </P
-><P
->    You can also go the opposite direction: if your browser prints
-    error messages instead of rendering a document falsely declared
-    as XHTML, you can overwrite the content type with
-    <SPAN
-CLASS="QUOTE"
->"text/html"</SPAN
-> and have it rendered as broken HTML document. 
-   </P
-><P
->    By default <TT
-CLASS="LITERAL"
->content-type-overwrite</TT
-> only replaces
-    <SPAN
-CLASS="QUOTE"
->"Content-Type:"</SPAN
-> headers that look like some kind of text.
-    If you want to overwrite it unconditionally, you have to combine it with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FORCE-TEXT-MODE"
->force-text-mode</A
-></TT
->.
-    This limitation exists for a reason, think twice before circumventing it.
-   </P
-><P
->    Most of the time it's easier to replace this action with a custom
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SERVER-HEADER-FILTER"
->server-header filter</A
-></TT
->.
-    It allows you to activate it for every document of a certain site and it will still
-    only replace the content types you aimed at.
-   </P
-><P
->    Of course you can apply <TT
-CLASS="LITERAL"
->content-type-overwrite</TT
->
-    to a whole site and then make URL based exceptions, but it's a lot
-    more work to get the same precision. 
-   </P
-></DD
-><DT
->Example usage (sections):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Check if www.example.net/ really uses valid XHTML
-{ +content-type-overwrite{application/xml} }
-www.example.net/
-
-# but leave the content type unmodified if the URL looks like a style sheet
-{-content-type-overwrite}
-www.example.net/.*\.css$
-www.example.net/.*style</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CRUNCH-CLIENT-HEADER"
->8.5.7. crunch-client-header</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Remove a client header <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has no dedicated action for.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes every header sent by the client that contains the string the user supplied as parameter.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Any string.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This action allows you to block client headers for which no dedicated
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> action exists.
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will remove every client header that
-    contains the string you supplied as parameter.
-   </P
-><P
->    Regular expressions are <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not supported</I
-></SPAN
-> and you can't
-    use this action to block different headers in the same request, unless
-    they contain the same string.
-   </P
-><P
->    <TT
-CLASS="LITERAL"
->crunch-client-header</TT
-> is only meant for quick tests.
-    If you have to block several different headers, or only want to modify
-    parts of them, you should use a
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CLIENT-HEADER-FILTER"
->client-header filter</A
-></TT
->.
-   </P
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="90%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->      Don't block any header without understanding the consequences.
-     </P
-></TD
-></TR
-></TABLE
-></DIV
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Block the non-existent "Privacy-Violation:" client header 
-{ +crunch-client-header{Privacy-Violation:} }
-/
-    </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CRUNCH-IF-NONE-MATCH"
->8.5.8. crunch-if-none-match</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Prevent yet another way to track the user's steps between sessions.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes the <SPAN
-CLASS="QUOTE"
->"If-None-Match:"</SPAN
-> HTTP client header.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Removing the <SPAN
-CLASS="QUOTE"
->"If-None-Match:"</SPAN
-> HTTP client header
-    is useful for filter testing, where you want to force a real
-    reload instead of getting status code <SPAN
-CLASS="QUOTE"
->"304"</SPAN
-> which
-    would cause the browser to use a cached copy of the page.
-   </P
-><P
->    It is also useful to make sure the header isn't used as a cookie
-    replacement (unlikely but possible).
-   </P
-><P
->    Blocking the <SPAN
-CLASS="QUOTE"
->"If-None-Match:"</SPAN
-> header shouldn't cause any
-    caching problems, as long as the <SPAN
-CLASS="QUOTE"
->"If-Modified-Since:"</SPAN
-> header
-    isn't blocked or missing as well.
-   </P
-><P
->    It is recommended to use this action together with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE"
->hide-if-modified-since</A
-></TT
->
-    and
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#OVERWRITE-LAST-MODIFIED"
->overwrite-last-modified</A
-></TT
->.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Let the browser revalidate cached documents but don't
-# allow the server to use the revalidation headers for user tracking.
-{+hide-if-modified-since{-60} \
- +overwrite-last-modified{randomize} \
- +crunch-if-none-match}
-/   </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CRUNCH-INCOMING-COOKIES"
->8.5.9. crunch-incoming-cookies</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->    Prevent the web server from setting HTTP cookies on your system
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes any <SPAN
-CLASS="QUOTE"
->"Set-Cookie:"</SPAN
-> HTTP headers from server replies.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This action is only concerned with <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->incoming</I
-></SPAN
-> HTTP cookies. For
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->outgoing</I
-></SPAN
-> HTTP cookies, use
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
-></TT
->.
-    Use <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
-> to disable HTTP cookies completely.
-   </P
-><P
->    It makes <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->no sense at all</I
-></SPAN
-> to use this action in conjunction
-    with the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
->session-cookies-only</A
-></TT
-> action,
-    since it would prevent the session cookies from being set. See also 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER-CONTENT-COOKIES"
->filter-content-cookies</A
-></TT
->.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+crunch-incoming-cookies</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CRUNCH-SERVER-HEADER"
->8.5.10. crunch-server-header</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Remove a server header <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has no dedicated action for.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes every header sent by the server that contains the string the user supplied as parameter.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Any string.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This action allows you to block server headers for which no dedicated
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> action exists. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    will remove every server header that contains the string you supplied as parameter.
-   </P
-><P
->    Regular expressions are <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not supported</I
-></SPAN
-> and you can't
-    use this action to block different headers in the same request, unless
-    they contain the same string.
-   </P
-><P
->    <TT
-CLASS="LITERAL"
->crunch-server-header</TT
-> is only meant for quick tests.
-    If you have to block several different headers, or only want to modify
-    parts of them, you should use a custom
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SERVER-HEADER-FILTER"
->server-header filter</A
-></TT
->.
-   </P
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="90%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->     Don't block any header without understanding the consequences.
-     </P
-></TD
-></TR
-></TABLE
-></DIV
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Crunch server headers that try to prevent caching
-{ +crunch-server-header{no-cache} }
-/   </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CRUNCH-OUTGOING-COOKIES"
->8.5.11. crunch-outgoing-cookies</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->    Prevent the web server from reading any HTTP cookies from your system
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes any <SPAN
-CLASS="QUOTE"
->"Cookie:"</SPAN
-> HTTP headers from client requests.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This action is only concerned with <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->outgoing</I
-></SPAN
-> HTTP cookies. For
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->incoming</I
-></SPAN
-> HTTP cookies, use
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-></TT
->.
-    Use <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
-> to disable HTTP cookies completely.
-   </P
-><P
->    It makes <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->no sense at all</I
-></SPAN
-> to use this action in conjunction
-    with the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
->session-cookies-only</A
-></TT
-> action,
-    since it would prevent the session cookies from being read.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+crunch-outgoing-cookies</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="DEANIMATE-GIFS"
->8.5.12. deanimate-gifs</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Stop those annoying, distracting animated GIF images.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    De-animate GIF animations, i.e. reduce them to their first or last image.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    <SPAN
-CLASS="QUOTE"
->"last"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"first"</SPAN
->
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This will also shrink the images considerably (in bytes, not pixels!). If
-    the option <SPAN
-CLASS="QUOTE"
->"first"</SPAN
-> is given, the first frame of the animation
-    is used as the replacement. If <SPAN
-CLASS="QUOTE"
->"last"</SPAN
-> is given, the last
-    frame of the animation is used instead, which probably makes more sense for
-    most banner animations, but also has the risk of not showing the entire
-    last frame (if it is only a delta to an earlier frame).
-   </P
-><P
->    You can safely use this action with patterns that will also match non-GIF
-    objects, because no attempt will be made at anything that doesn't look like
-    a GIF.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->      <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+deanimate-gifs{last}</PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="DOWNGRADE-HTTP-VERSION"
->8.5.13. downgrade-http-version</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Work around (very rare) problems with HTTP/1.1</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Downgrades HTTP/1.1 client requests and server replies to HTTP/1.0.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This is a left-over from the time when <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    didn't support important HTTP/1.1 features well. It is left here for the
-    unlikely case that you experience HTTP/1.1 related problems with some server
-    out there. Not all HTTP/1.1 features and requirements are supported yet,
-    so there is a chance you might need this action.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{+downgrade-http-version}
-problem-host.example.com</PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FAST-REDIRECTS"
->8.5.14. fast-redirects</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Fool some click-tracking scripts and speed up indirect links.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Detects redirection URLs and redirects the browser without contacting
-    the redirection server first.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
-></P
-><UL
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"simple-check"</SPAN
-> to just search for the string <SPAN
-CLASS="QUOTE"
->"http://";</SPAN
->
-      to detect redirection URLs.
-     </P
-></LI
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"check-decoded-url"</SPAN
-> to decode URLs (if necessary) before searching
-      for redirection URLs.
-     </P
-></LI
-></UL
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->  
-    Many sites, like yahoo.com, don't just link to other sites. Instead, they
-    will link to some script on their own servers, giving the destination as a
-    parameter, which will then redirect you to the final target. URLs
-    resulting from this scheme typically look like:
-    <SPAN
-CLASS="QUOTE"
->"http://www.example.org/click-tracker.cgi?target=http%3a//www.example.net/";</SPAN
->.
-  </P
-><P
->    Sometimes, there are even multiple consecutive redirects encoded in the
-    URL. These redirections via scripts make your web browsing more traceable,
-    since the server from which you follow such a link can see where you go
-    to. Apart from that, valuable bandwidth and time is wasted, while your
-    browser asks the server for one redirect after the other. Plus, it feeds
-    the advertisers.
-   </P
-><P
->    This feature is currently not very smart and is scheduled for improvement.
-    If it is enabled by default, you will have to create some exceptions to
-    this action. It can lead to failures in several ways: 
-   </P
-><P
->    Not every URLs with other URLs as parameters is evil.
-    Some sites offer a real service that requires this information to work.
-    For example a validation service needs to know, which document to validate.
-    <TT
-CLASS="LITERAL"
->fast-redirects</TT
-> assumes that every URL parameter that
-    looks like another URL is a redirection target, and will always redirect to
-    the last one. Most of the time the assumption is correct, but if it isn't,
-    the user gets redirected anyway.
-   </P
-><P
->    Another failure occurs if the URL contains other parameters after the URL parameter.
-    The URL:
-    <SPAN
-CLASS="QUOTE"
->"http://www.example.org/?redirect=http%3a//www.example.net/&#38;foo=bar";</SPAN
->.
-    contains the redirection URL <SPAN
-CLASS="QUOTE"
->"http://www.example.net/";</SPAN
->,
-    followed by another parameter. <TT
-CLASS="LITERAL"
->fast-redirects</TT
-> doesn't know that
-    and will cause a redirect to <SPAN
-CLASS="QUOTE"
->"http://www.example.net/&#38;foo=bar";</SPAN
->.
-    Depending on the target server configuration, the parameter will be silently ignored
-    or lead to a <SPAN
-CLASS="QUOTE"
->"page not found"</SPAN
-> error. You can prevent this problem by
-    first using the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#REDIRECT"
->redirect</A
-></TT
-> action
-    to remove the last part of the URL, but it requires a little effort.
-   </P
-><P
->    To detect a redirection URL, <TT
-CLASS="LITERAL"
->fast-redirects</TT
-> only
-    looks for the string <SPAN
-CLASS="QUOTE"
->"http://";</SPAN
->, either in plain text
-    (invalid but often used) or encoded as <SPAN
-CLASS="QUOTE"
->"http%3a//"</SPAN
->.
-    Some sites use their own URL encoding scheme, encrypt the address
-    of the target server or replace it with a database id. In theses cases
-    <TT
-CLASS="LITERAL"
->fast-redirects</TT
-> is fooled and the request reaches the
-    redirection server where it probably gets logged.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> { +fast-redirects{simple-check} }
-   one.example.com 
-
- { +fast-redirects{check-decoded-url} }
-   another.example.com/testing</PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FILTER"
->8.5.15. filter</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Get rid of HTML and JavaScript annoyances, banner advertisements (by size), 
-         do fun text replacements, add personalized effects, etc.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    All instances of text-based type, most notably HTML and JavaScript, to which
-    this action applies, can be filtered on-the-fly through the specified regular
-    expression based substitutions. (Note: as of version 3.0.3 plain text documents
-    are exempted from filtering, because web servers often use the
-   <TT
-CLASS="LITERAL"
->text/plain</TT
-> MIME type for all files whose type they don't know.)
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    The name of a content filter, as defined in the <A
-HREF="filter-file.html"
->filter file</A
->.
-    Filters can be defined in one or more  files as defined by the 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="config.html#FILTERFILE"
->filterfile</A
-></TT
->
-    option in the <A
-HREF="config.html"
->config file</A
->. 
-    <TT
-CLASS="FILENAME"
->default.filter</TT
-> is the collection of filters 
-    supplied by the developers. Locally defined filters should go 
-    in their own file, such as <TT
-CLASS="FILENAME"
->user.filter</TT
->.
-   </P
-><P
->     When used in its negative form,
-     and without parameters, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> filtering is completely disabled.
-  </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    For your convenience, there are a number of pre-defined filters available 
-    in the distribution filter file that you can use. See the examples below for
-    a list.
-   </P
-><P
->    Filtering requires buffering the page content, which may appear to
-    slow down page rendering since nothing is displayed until all content has
-    passed the filters. (It does not really take longer, but seems that way
-    since the page is not incrementally displayed.) This effect will be more
-    noticeable on slower connections.
-   </P
-><P
->   <SPAN
-CLASS="QUOTE"
->"Rolling your own"</SPAN
->
-    filters requires a knowledge of 
-     <A
-HREF="http://en.wikipedia.org/wiki/Regular_expressions";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"Regular
-     Expressions"</SPAN
-></A
-> and 
-      <A
-HREF="http://en.wikipedia.org/wiki/Html";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"HTML"</SPAN
-></A
->.
-    This is very powerful feature, and potentially very intrusive. 
-    Filters should be used with caution, and where an equivalent
-    <SPAN
-CLASS="QUOTE"
->"action"</SPAN
-> is not available.
-   </P
-><P
->    The amount of data that can be filtered is limited to the 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="config.html#BUFFER-LIMIT"
->buffer-limit</A
-></TT
->
-    option in the main <A
-HREF="config.html"
->config file</A
->. The 
-    default is 4096 KB (4 Megs). Once this limit is exceeded, the buffered
-    data, and all pending data, is passed through unfiltered. 
-   </P
-><P
->    Inappropriate MIME types, such as zipped files, are not filtered at all.
-    (Again, only text-based types except plain text). Encrypted SSL data
-    (from HTTPS servers) cannot be filtered either, since this would violate
-    the integrity of the secure transaction. In some situations it might
-    be necessary to protect certain text, like source code, from filtering
-    by defining appropriate <TT
-CLASS="LITERAL"
->-filter</TT
-> exceptions.
-   </P
-><P
->    Compressed content can't be filtered either, unless <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    is compiled with zlib support (requires at least <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7),
-    in which case <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will decompress the content before filtering
-    it.
-   </P
-><P
->    If you use a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version without zlib support, but want filtering to work on
-    as much documents as possible, even those that would normally be sent compressed,
-    you must use the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#PREVENT-COMPRESSION"
->prevent-compression</A
-></TT
->
-    action in conjunction with <TT
-CLASS="LITERAL"
->filter</TT
->.
-   </P
-><P
->    Content filtering can achieve some of the same effects as the 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->
-    action, i.e. it can be used to block ads and banners. But the mechanism 
-    works quite differently. One effective use, is to block ad banners 
-    based on their size (see below), since many of these seem to be somewhat 
-    standardized.
-   </P
-><P
->    <A
-HREF="contact.html"
->Feedback</A
-> with suggestions for new or
-    improved filters is particularly welcome!
-   </P
-><P
->    The below list has only the names and a one-line description of each
-    predefined filter. There are <A
-HREF="filter-file.html#PREDEFINED-FILTERS"
->more
-    verbose explanations</A
-> of what these filters do in the <A
-HREF="filter-file.html"
->filter file chapter</A
->.
-   </P
-></DD
-><DT
->Example usage (with filters from the distribution <TT
-CLASS="FILENAME"
->default.filter</TT
-> file).
-  See <A
-HREF="filter-file.html#PREDEFINED-FILTERS"
->the Predefined Filters section</A
-> for 
-  more explanation on each:</DT
-><DD
-><P
->    <A
-NAME="FILTER-JS-ANNOYANCES"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{js-annoyances}       # Get rid of particularly annoying JavaScript abuse.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-JS-EVENTS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{js-events}           # Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-HTML-ANNOYANCES"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{html-annoyances}     # Get rid of particularly annoying HTML abuse.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-CONTENT-COOKIES"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{content-cookies}     # Kill cookies that come in the HTML or JS content.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-REFRESH-TAGS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{refresh-tags}        # Kill automatic refresh tags (for dial-on-demand setups).</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-UNSOLICITED-POPUPS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{unsolicited-popups}  # Disable only unsolicited pop-up windows. Useful if your browser lacks this ability.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-ALL-POPUPS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{all-popups}          # Kill all popups in JavaScript and HTML. Useful if your browser lacks this ability.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-IMG-REORDER"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{img-reorder}         # Reorder attributes in &#60;img&#62; tags to make the banners-by-* filters more effective.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-BANNERS-BY-SIZE"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{banners-by-size}     # Kill banners by size.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-BANNERS-BY-LINK"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{banners-by-link}     # Kill banners by their links to known clicktrackers.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-WEBBUGS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{webbugs}             # Squish WebBugs (1x1 invisible GIFs used for user tracking).</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-TINY-TEXTFORMS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{tiny-textforms}      # Extend those tiny textareas up to 40x80 and kill the hard wrap.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-JUMPING-WINDOWS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{jumping-windows}     # Prevent windows from resizing and moving themselves.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-FRAMESET-BORDERS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{frameset-borders}    # Give frames a border and make them resizable.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-DEMORONIZER"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{demoronizer}         # Fix MS's non-standard use of standard charsets.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-SHOCKWAVE-FLASH"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{shockwave-flash}     # Kill embedded Shockwave Flash objects.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-QUICKTIME-KIOSKMODE"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{quicktime-kioskmode} # Make Quicktime movies saveable.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-FUN"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{fun}                 # Text replacements for subversive browsing fun!</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-CRUDE-PARENTAL"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{crude-parental}      # Crude parental filtering. Note that this filter doesn't work reliably.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-IE-EXPLOITS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{ie-exploits}         # Disable some known Internet Explorer bug exploits.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-SITE-SPECIFICS"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{site-specifics}      # Cure for site-specific problems. Don't apply generally!</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-NO-PING"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{no-ping}             # Removes non-standard ping attributes in &#60;a&#62; and &#60;area&#62; tags.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-GOOGLE"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{google}              # CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-YAHOO"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{yahoo}               # CSS-based block for Yahoo text ads. Also removes a width limitation.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-MSN"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{msn}                 # CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    <A
-NAME="FILTER-BLOGSPOT"
-></A
->
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+filter{blogspot}            # Cleans up some Blogspot blogs. Read the fine print before using this.</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FORCE-TEXT-MODE"
->8.5.16. force-text-mode</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Force <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to treat a document as if it was in some kind of <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->text</I
-></SPAN
-> format.   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Declares a document as text, even if the <SPAN
-CLASS="QUOTE"
->"Content-Type:"</SPAN
-> isn't detected as such.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    As explained <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->above</A
-></TT
->,
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> tries to only filter files that are
-    in some kind of text format. The same restrictions apply to
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CONTENT-TYPE-OVERWRITE"
->content-type-overwrite</A
-></TT
->.
-    <TT
-CLASS="LITERAL"
->force-text-mode</TT
-> declares a document as text,
-    without looking at the <SPAN
-CLASS="QUOTE"
->"Content-Type:"</SPAN
-> first.
-   </P
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="90%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->     Think twice before activating this action. Filtering binary data
-     with regular expressions can cause file damage.
-    </P
-></TD
-></TR
-></TABLE
-></DIV
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+force-text-mode
-     </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FORWARD-OVERRIDE"
->8.5.17. forward-override</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Change the forwarding settings based on User-Agent or request origin</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Overrules the forward directives in the configuration file.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Multi-value.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
-></P
-><UL
-><LI
-><P
-><SPAN
-CLASS="QUOTE"
->"forward ."</SPAN
-> to use a direct connection without any additional proxies.</P
-></LI
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"forward 127.0.0.1:8123"</SPAN
-> to use the HTTP proxy listening at 127.0.0.1 port 8123.
-     </P
-></LI
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"forward-socks4a 127.0.0.1:9050 ."</SPAN
-> to use the socks4a proxy listening at
-      127.0.0.1 port 9050. Replace <SPAN
-CLASS="QUOTE"
->"forward-socks4a"</SPAN
-> with <SPAN
-CLASS="QUOTE"
->"forward-socks4"</SPAN
->
-      to use a socks4 connection  (with local DNS resolution) instead, use <SPAN
-CLASS="QUOTE"
->"forward-socks5"</SPAN
->
-      for socks5 connections (with remote DNS resolution).
-     </P
-></LI
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"forward-socks4a 127.0.0.1:9050 proxy.example.org:8000"</SPAN
-> to use the socks4a proxy
-      listening at 127.0.0.1 port 9050 to reach the HTTP proxy listening at proxy.example.org port 8000.
-      Replace <SPAN
-CLASS="QUOTE"
->"forward-socks4a"</SPAN
-> with <SPAN
-CLASS="QUOTE"
->"forward-socks4"</SPAN
-> to use a socks4 connection
-      (with local DNS resolution) instead, use <SPAN
-CLASS="QUOTE"
->"forward-socks5"</SPAN
->
-      for socks5 connections (with remote DNS resolution).
-     </P
-></LI
-></UL
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This action takes parameters similar to the
-    <A
-HREF="config.html#FORWARDING"
->forward</A
-> directives in the configuration
-    file, but without the URL pattern. It can be used as replacement, but normally it's only
-    used in cases where matching based on the request URL isn't sufficient.
-   </P
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="90%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->     Please read the description for the <A
-HREF="config.html#FORWARDING"
->forward</A
-> directives before
-     using this action. Forwarding to the wrong people will reduce your privacy and increase the
-     chances of man-in-the-middle attacks.
-    </P
-><P
->     If the ports are missing or invalid, default values will be used. This might change
-     in the future and you shouldn't rely on it. Otherwise incorrect syntax causes Privoxy
-     to exit.
-    </P
-><P
->     Use the <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->show-url-info CGI page</A
->
-     to verify that your forward settings do what you thought the do.
-    </P
-></TD
-></TR
-></TABLE
-></DIV
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Always use direct connections for requests previously tagged as
-# <SPAN
-CLASS="QUOTE"
->"User-Agent: fetch libfetch/2.0"</SPAN
-> and make sure
-# resuming downloads continues to work.
-# This way you can continue to use Tor for your normal browsing,
-# without overloading the Tor network with your FreeBSD ports updates
-# or downloads of bigger files like ISOs.
-# Note that HTTP headers are easy to fake and therefore their
-# values are as (un)trustworthy as your clients and users.
-{+forward-override{forward .} \
- -hide-if-modified-since      \
- -overwrite-last-modified     \
-}
-TAG:^User-Agent: fetch libfetch/2\.0$
-     </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HANDLE-AS-EMPTY-DOCUMENT"
->8.5.18. handle-as-empty-document</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Mark URLs that should be replaced by empty documents <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->if they get blocked</I
-></SPAN
-></P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    This action alone doesn't do anything noticeable. It just marks URLs.
-    If the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> action <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->also applies</I
-></SPAN
->,
-    the presence or absence of this mark decides whether an HTML <SPAN
-CLASS="QUOTE"
->"BLOCKED"</SPAN
->
-    page, or an empty document will be sent to the client as a substitute for the blocked content.
-    The <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->empty</I
-></SPAN
-> document isn't literally empty, but actually contains a single space.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Some browsers complain about syntax errors if JavaScript documents
-    are blocked with <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
-    default HTML page; this option can be used to silence them.
-    And of course this action can also be used to eliminate the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    BLOCKED message in frames.
-   </P
-><P
->    The content type for the empty document can be specified with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CONTENT-TYPE-OVERWRITE"
->content-type-overwrite{}</A
-></TT
->,
-    but usually this isn't necessary.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Block all documents on example.org that end with ".js",
-# but send an empty document instead of the usual HTML message. 
-{+block{Blocked JavaScript} +handle-as-empty-document}
-example.org/.*\.js$
-     </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HANDLE-AS-IMAGE"
->8.5.19. handle-as-image</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Mark URLs as belonging to images (so they'll be replaced by images <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->if they do get blocked</I
-></SPAN
->, rather than HTML pages)</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    This action alone doesn't do anything noticeable. It just marks URLs as images.
-    If the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> action <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->also applies</I
-></SPAN
->,
-    the presence or absence of this mark decides whether an HTML <SPAN
-CLASS="QUOTE"
->"blocked"</SPAN
->
-    page, or a replacement image (as determined by the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></TT
-> action) will be sent to the
-    client as a substitute for the blocked content.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The below generic example section is actually part of <TT
-CLASS="FILENAME"
->default.action</TT
->.
-    It marks all URLs with well-known image file name extensions as images and should
-    be left intact. 
-   </P
-><P
->    Users will probably only want to use the handle-as-image action in conjunction with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->, to block sources of banners, whose URLs don't
-    reflect the file type, like in the second example section.
-   </P
-><P
->    Note that you cannot treat HTML pages as images in most cases. For instance, (in-line) ad
-    frames require an HTML page to be sent, or they won't display properly.
-    Forcing <TT
-CLASS="LITERAL"
->handle-as-image</TT
-> in this situation will not replace the
-    ad frame with an image, but lead to error messages.
-   </P
-></DD
-><DT
->Example usage (sections):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Generic image extensions:
-#
-{+handle-as-image}
-/.*\.(gif|jpg|jpeg|png|bmp|ico)$
-
-# These don't look like images, but they're banners and should be
-# blocked as images:
-#
-{+block{Nasty banners.} +handle-as-image}
-nasty-banner-server.example.com/junk.cgi\?output=trash</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HIDE-ACCEPT-LANGUAGE"
->8.5.20. hide-accept-language</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Pretend to use different language settings.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes or replaces the <SPAN
-CLASS="QUOTE"
->"Accept-Language:"</SPAN
-> HTTP header in client requests.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Keyword: <SPAN
-CLASS="QUOTE"
->"block"</SPAN
->, or any user defined value.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Faking the browser's language settings can be useful to make a
-    foreign User-Agent set with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HIDE-USER-AGENT"
->hide-user-agent</A
-></TT
->
-    more believable.
-   </P
-><P
->    However some sites with content in different languages check the
-    <SPAN
-CLASS="QUOTE"
->"Accept-Language:"</SPAN
-> to decide which one to take by default.
-    Sometimes it isn't possible to later switch to another language without
-    changing the <SPAN
-CLASS="QUOTE"
->"Accept-Language:"</SPAN
-> header first.
-   </P
-><P
->    Therefore it's a good idea to either only change the
-    <SPAN
-CLASS="QUOTE"
->"Accept-Language:"</SPAN
-> header to languages you understand,
-    or to languages that aren't wide spread.
-   </P
-><P
->    Before setting the <SPAN
-CLASS="QUOTE"
->"Accept-Language:"</SPAN
-> header
-    to a rare language, you should consider that it helps to
-    make your requests unique and thus easier to trace.
-    If you don't plan to change this header frequently,
-    you should stick to a common language. 
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Pretend to use Canadian language settings.
-{+hide-accept-language{en-ca} \
-+hide-user-agent{Mozilla/5.0 (X11; U; OpenBSD i386; en-CA; rv:1.8.0.4) Gecko/20060628 Firefox/1.5.0.4} \
-}
-/   </PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HIDE-CONTENT-DISPOSITION"
->8.5.21. hide-content-disposition</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Prevent download menus for content you prefer to view inside the browser.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes or replaces the <SPAN
-CLASS="QUOTE"
->"Content-Disposition:"</SPAN
-> HTTP header set by some servers.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Keyword: <SPAN
-CLASS="QUOTE"
->"block"</SPAN
->, or any user defined value.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Some servers set the <SPAN
-CLASS="QUOTE"
->"Content-Disposition:"</SPAN
-> HTTP header for
-    documents they assume you want to save locally before viewing them.
-    The <SPAN
-CLASS="QUOTE"
->"Content-Disposition:"</SPAN
-> header contains the file name
-    the browser is supposed to use by default.
-   </P
-><P
->    In most browsers that understand this header, it makes it impossible to
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->just view</I
-></SPAN
-> the document, without downloading it first,
-    even if it's just a simple text file or an image.
-   </P
-><P
->    Removing the <SPAN
-CLASS="QUOTE"
->"Content-Disposition:"</SPAN
-> header helps
-    to prevent this annoyance, but some browsers additionally check the
-    <SPAN
-CLASS="QUOTE"
->"Content-Type:"</SPAN
-> header, before they decide if they can
-    display a document without saving it first. In these cases, you have
-    to change this header as well, before the browser stops displaying
-    download menus.
-   </P
-><P
->    It is also possible to change the server's file name suggestion
-    to another one, but in most cases it isn't worth the time to set
-    it up.
-   </P
-><P
->    This action will probably be removed in the future,
-    use server-header filters instead.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Disarm the download link in Sourceforge's patch tracker
-{ -filter \
- +content-type-overwrite{text/plain}\
- +hide-content-disposition{block} }
- .sourceforge.net/tracker/download\.php</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HIDE-IF-MODIFIED-SINCE"
->8.5.22. hide-if-modified-since</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Prevent yet another way to track the user's steps between sessions.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes the <SPAN
-CLASS="QUOTE"
->"If-Modified-Since:"</SPAN
-> HTTP client header or modifies its value. 
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Keyword: <SPAN
-CLASS="QUOTE"
->"block"</SPAN
->, or a user defined value that specifies a range of hours.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Removing this header is useful for filter testing, where you want to force a real
-    reload instead of getting status code <SPAN
-CLASS="QUOTE"
->"304"</SPAN
->, which would cause the
-    browser to use a cached copy of the page.
-   </P
-><P
->    Instead of removing the header, <TT
-CLASS="LITERAL"
->hide-if-modified-since</TT
-> can
-    also add or subtract a random amount of time to/from the header's value.
-    You specify a range of minutes where the random factor should be chosen from and
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> does the rest. A negative value means
-    subtracting, a positive value adding.
-   </P
-><P
->    Randomizing the value of the <SPAN
-CLASS="QUOTE"
->"If-Modified-Since:"</SPAN
-> makes
-    it less likely that the server can use the time as a cookie replacement,
-    but you will run into caching problems if the random range is too high.
-   </P
-><P
->    It is a good idea to only use a small negative value and let
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#OVERWRITE-LAST-MODIFIED"
->overwrite-last-modified</A
-></TT
->
-    handle the greater changes.
-   </P
-><P
->    It is also recommended to use this action together with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-IF-NONE-MATCH"
->crunch-if-none-match</A
-></TT
->,
-    otherwise it's more or less pointless.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Let the browser revalidate but make tracking based on the time less likely.
-{+hide-if-modified-since{-60} \
- +overwrite-last-modified{randomize} \
- +crunch-if-none-match}
-/</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HIDE-FROM-HEADER"
->8.5.23. hide-from-header</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Keep your (old and ill) browser from telling web servers your email address</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes any existing <SPAN
-CLASS="QUOTE"
->"From:"</SPAN
-> HTTP header, or replaces it with the
-    specified string.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Keyword: <SPAN
-CLASS="QUOTE"
->"block"</SPAN
->, or any user defined value.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The keyword <SPAN
-CLASS="QUOTE"
->"block"</SPAN
-> will completely remove the header 
-    (not to be confused with the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->
-    action).
-   </P
-><P
->    Alternately, you can specify any value you prefer to be sent to the web
-    server. If you do, it is a matter of fairness not to use any address that
-    is actually used by a real person.
-   </P
-><P
->    This action is rarely needed, as modern web browsers don't send
-    <SPAN
-CLASS="QUOTE"
->"From:"</SPAN
-> headers anymore.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+hide-from-header{block}</PRE
-></TD
-></TR
-></TABLE
-> or
-    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+hide-from-header{spam-me-senseless@xxxxxxxxxxxxxxxxxxxxxxx}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HIDE-REFERRER"
->8.5.24. hide-referrer</A
-></H4
-><A
-NAME="HIDE-REFERER"
-></A
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Conceal which link you followed to get to a particular site</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes the <SPAN
-CLASS="QUOTE"
->"Referer:"</SPAN
-> (sic) HTTP header from the client request,
-    or replaces it with a forged one.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
-></P
-><UL
-><LI
-><P
-><SPAN
-CLASS="QUOTE"
->"conditional-block"</SPAN
-> to delete the header completely if the host has changed.</P
-></LI
-><LI
-><P
-><SPAN
-CLASS="QUOTE"
->"conditional-forge"</SPAN
-> to forge the header if the host has changed.</P
-></LI
-><LI
-><P
-><SPAN
-CLASS="QUOTE"
->"block"</SPAN
-> to delete the header unconditionally.</P
-></LI
-><LI
-><P
-><SPAN
-CLASS="QUOTE"
->"forge"</SPAN
-> to pretend to be coming from the homepage of the server we are talking to.</P
-></LI
-><LI
-><P
->Any other string to set a user defined referrer.</P
-></LI
-></UL
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    <TT
-CLASS="LITERAL"
->conditional-block</TT
-> is the only parameter,
-    that isn't easily detected in the server's log file. If it blocks the
-    referrer, the request will look like the visitor used a bookmark or
-    typed in the address directly.
-   </P
-><P
->    Leaving the referrer unmodified for requests on the same host
-    allows the server owner to see the visitor's <SPAN
-CLASS="QUOTE"
->"click path"</SPAN
->,
-    but in most cases she could also get that information by comparing
-    other parts of the log file: for example the User-Agent if it isn't
-    a very common one, or the user's IP address if it doesn't change between
-    different requests.
-   </P
-><P
->    Always blocking the referrer, or using a custom one, can lead to
-    failures on servers that check the referrer before they answer any
-    requests, in an attempt to prevent their content from being
-    embedded or linked to elsewhere.
-   </P
-><P
->    Both <TT
-CLASS="LITERAL"
->conditional-block</TT
-> and <TT
-CLASS="LITERAL"
->forge</TT
->
-    will work with referrer checks, as long as content and valid referring page
-    are on the same host. Most of the time that's the case.
-   </P
-><P
->  
-    <TT
-CLASS="LITERAL"
->hide-referer</TT
-> is an alternate spelling of
-    <TT
-CLASS="LITERAL"
->hide-referrer</TT
-> and the two can be can be freely
-    substituted with each other. (<SPAN
-CLASS="QUOTE"
->"referrer"</SPAN
-> is the
-    correct English spelling, however the HTTP specification has a bug - it
-    requires it to be spelled as <SPAN
-CLASS="QUOTE"
->"referer"</SPAN
->.) 
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+hide-referrer{forge}</PRE
-></TD
-></TR
-></TABLE
-> or
-     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+hide-referrer{http://www.yahoo.com/}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HIDE-USER-AGENT"
->8.5.25. hide-user-agent</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Try to conceal your type of browser and client operating system</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Replaces the value of the <SPAN
-CLASS="QUOTE"
->"User-Agent:"</SPAN
-> HTTP header
-    in client requests with the specified value.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    Any user-defined string.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="90%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->     This can lead to problems on web sites that depend on looking at this header in
-     order to customize their content for different browsers (which, by the
-     way, is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->NOT</I
-></SPAN
-> the right thing to do: good web sites
-     work browser-independently). 
-    </P
-></TD
-></TR
-></TABLE
-></DIV
-><P
->    Using this action in multi-user setups or wherever different types of
-    browsers will access the same <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not recommended</I
-></SPAN
->. In single-user, single-browser
-    setups, you might use it to delete your OS version information from
-    the headers, because it is an invitation to exploit known bugs for your
-    OS. It is also occasionally useful to forge this in order to access 
-    sites that won't let you in otherwise (though there may be a good 
-    reason in some cases). Example of this: some MSN sites will not 
-    let <SPAN
-CLASS="APPLICATION"
->Mozilla</SPAN
-> enter, yet forging to a 
-    <SPAN
-CLASS="APPLICATION"
->Netscape 6.1</SPAN
-> user-agent works just fine.
-    (Must be just a silly MS goof, I'm sure :-).
-   </P
-><P
->     More information on known user-agent strings can be found at 
-     <A
-HREF="http://www.user-agents.org/";
-TARGET="_top"
->http://www.user-agents.org/</A
->
-     and 
-     <A
-HREF="http://en.wikipedia.org/wiki/User_agent";
-TARGET="_top"
->http://en.wikipedia.org/wiki/User_agent</A
->.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+hide-user-agent{Netscape 6.1 (X11; I; Linux 2.4.18 i686)}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="LIMIT-CONNECT"
->8.5.26. limit-connect</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Prevent abuse of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as a TCP proxy relay or disable SSL for untrusted sites</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Specifies to which ports HTTP CONNECT requests are allowable.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    A comma-separated list of ports or port ranges (the latter using dashes, with the minimum
-    defaulting to 0 and the maximum to 65K).
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    By default, i.e. if no <TT
-CLASS="LITERAL"
->limit-connect</TT
-> action applies,
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> allows HTTP CONNECT requests to all
-    ports. Use <TT
-CLASS="LITERAL"
->limit-connect</TT
-> if fine-grained control
-    is desired for some or all destinations.
-   </P
-><P
->    The CONNECT methods exists in HTTP to allow access to secure websites
-    (<SPAN
-CLASS="QUOTE"
->"https://";</SPAN
-> URLs) through proxies. It works very simply:
-    the proxy connects to the server on the specified port, and then
-    short-circuits its connections to the client and to the remote server.
-    This means CONNECT-enabled proxies can be used as TCP relays very easily.
-  </P
-><P
->   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> relays HTTPS traffic without seeing
-   the decoded content. Websites can leverage this limitation to circumvent <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s
-   filters. By specifying an invalid port range you can disable HTTPS entirely.
-  </P
-></DD
-><DT
->Example usages:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+limit-connect{443}                   # Port 443 is OK.
-+limit-connect{80,443}                # Ports 80 and 443 are OK.
-+limit-connect{-3, 7, 20-100, 500-}   # Ports less than 3, 7, 20 to 100 and above 500 are OK.
-+limit-connect{-}                     # All ports are OK
-+limit-connect{,}                     # No HTTPS/SSL traffic is allowed</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="PREVENT-COMPRESSION"
->8.5.27. prevent-compression</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->    Ensure that servers send the content uncompressed, so it can be
-    passed through <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
-></TT
->s.
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Removes the Accept-Encoding header which can be used to ask for compressed transfer.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    More and more websites send their content compressed by default, which
-    is generally a good idea and saves bandwidth. But the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
-></TT
-> and
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#DEANIMATE-GIFS"
->deanimate-gifs</A
-></TT
->
-    actions need access to the uncompressed data.
-   </P
-><P
->    When compiled with zlib support (available since <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7), content that should be
-    filtered is decompressed on-the-fly and you don't have to worry about this action.
-    If you are using an older <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version, or one that hasn't been compiled with zlib
-    support, this action can be used to convince the server to send the content uncompressed.
-   </P
-><P
->    Most text-based instances compress very well, the size is seldom decreased by less than 50%,
-    for markup-heavy instances like news feeds saving more than 90% of the original size isn't
-    unusual. 
-   </P
-><P
->    Not using compression will therefore slow down the transfer, and you should only
-    enable this action if you really need it. As of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7 it's disabled in all
-    predefined action settings.
-   </P
-><P
->    Note that some (rare) ill-configured sites don't handle requests for uncompressed
-    documents correctly. Broken PHP applications tend to send an empty document body,
-    some IIS versions only send the beginning of the content. If you enable
-    <TT
-CLASS="LITERAL"
->prevent-compression</TT
-> per default, you might want to add
-    exceptions for those sites. See the example for how to do that.
-   </P
-></DD
-><DT
->Example usage (sections):</DT
-><DD
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Selectively turn off compression, and enable a filter
-#
-{ +filter{tiny-textforms} +prevent-compression }
-# Match only these sites
- .google.
- sourceforge.net
- sf.net
-
-# Or instead, we could set a universal default:
-#
-{ +prevent-compression }
- / # Match all sites
-
-# Then maybe make exceptions for broken sites:
-#
-{ -prevent-compression }
-.compusa.com/</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="OVERWRITE-LAST-MODIFIED"
->8.5.28. overwrite-last-modified</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Prevent yet another way to track the user's steps between sessions.</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes the <SPAN
-CLASS="QUOTE"
->"Last-Modified:"</SPAN
-> HTTP server header or modifies its value. 
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    One of the keywords: <SPAN
-CLASS="QUOTE"
->"block"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"reset-to-request-time"</SPAN
->
-    and <SPAN
-CLASS="QUOTE"
->"randomize"</SPAN
->
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Removing the <SPAN
-CLASS="QUOTE"
->"Last-Modified:"</SPAN
-> header is useful for filter
-    testing, where you want to force a real reload instead of getting status
-    code <SPAN
-CLASS="QUOTE"
->"304"</SPAN
->, which would cause the browser to reuse the old
-    version of the page.
-   </P
-><P
->    The <SPAN
-CLASS="QUOTE"
->"randomize"</SPAN
-> option overwrites the value of the
-    <SPAN
-CLASS="QUOTE"
->"Last-Modified:"</SPAN
-> header with a randomly chosen time
-    between the original value and the current time. In theory the server
-    could send each document with a different <SPAN
-CLASS="QUOTE"
->"Last-Modified:"</SPAN
->
-    header to track visits without using cookies. <SPAN
-CLASS="QUOTE"
->"Randomize"</SPAN
->
-    makes it impossible and the browser can still revalidate cached documents. 
-   </P
-><P
->    <SPAN
-CLASS="QUOTE"
->"reset-to-request-time"</SPAN
-> overwrites the value of the
-    <SPAN
-CLASS="QUOTE"
->"Last-Modified:"</SPAN
-> header with the current time. You could use
-    this option together with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE"
->hide-if-modified-since</A
-></TT
->
-    to further customize your random range.
-   </P
-><P
->    The preferred parameter here is <SPAN
-CLASS="QUOTE"
->"randomize"</SPAN
->. It is safe
-    to use, as long as the time settings are more or less correct.
-    If the server sets the <SPAN
-CLASS="QUOTE"
->"Last-Modified:"</SPAN
-> header to the time
-    of the request, the random range becomes zero and the value stays the same.
-    Therefore you should later randomize it a second time with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE"
->hided-if-modified-since</A
-></TT
->,
-    just to be sure. 
-   </P
-><P
->    It is also recommended to use this action together with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-IF-NONE-MATCH"
->crunch-if-none-match</A
-></TT
->.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Let the browser revalidate without being tracked across sessions
-{ +hide-if-modified-since{-60} \
- +overwrite-last-modified{randomize} \
- +crunch-if-none-match}
-/</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="REDIRECT"
->8.5.29. redirect</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->    Redirect requests to other sites.
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Convinces the browser that the requested document has been moved
-    to another location and the browser should get it from there.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    An absolute URL or a single pcrs command.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Requests to which this action applies are answered with a
-    HTTP redirect to URLs of your choosing. The new URL is
-    either provided as parameter, or derived by applying a
-    single pcrs command to the original URL.
-   </P
-><P
->    This action will be ignored if you use it together with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->.
-    It can be combined with
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FAST-REDIRECTS"
->fast-redirects{check-decoded-url}</A
-></TT
->
-    to redirect to a decoded version of a rewritten URL.
-   </P
-><P
->    Use this action carefully, make sure not to create redirection loops
-    and be aware that using your own redirects might make it
-    possible to fingerprint your requests.
-   </P
-><P
->    In case of problems with your redirects, or simply to watch
-    them working, enable <A
-HREF="config.html#DEBUG"
->debug 128</A
->.
-   </P
-></DD
-><DT
->Example usages:</DT
-><DD
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Replace example.com's style sheet with another one
-{ +redirect{http://localhost/css-replacements/example.com.css} }
- example.com/stylesheet\.css
-
-# Create a short, easy to remember nickname for a favorite site
-# (relies on the browser accept and forward invalid URLs to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->)
-{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} }
- a
-
-# Always use the expanded view for Undeadly.org articles
-# (Note the $ at the end of the URL pattern to make sure
-# the request for the rewritten URL isn't redirected as well)
-{+redirect{s@$@&#38;mode=expanded@}}
-undeadly.org/cgi\?action=article&#38;sid=\d*$
-
-# Redirect Google search requests to MSN
-{+redirect{s@^http://[^/]*/search\?q=([^&#38;]*).*@http://search.msn.com/results.aspx?q=$1@}}
-.google.com/search
-
-# Redirect MSN search requests to Yahoo
-{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&#38;]*).*@http://search.yahoo.com/search?p=$1@}}
-search.msn.com//results\.aspx\?q=
-
-# Redirect remote requests for this manual
-# to the local version delivered by Privoxy
-{+redirect{s@^http://www@http://config@}}
-www.privoxy.org/user-manual/</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SERVER-HEADER-FILTER"
->8.5.30. server-header-filter</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->   Rewrite or remove single server headers.
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    All server headers to which this action applies are filtered on-the-fly
-    through the specified regular expression based substitutions.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    The name of a server-header filter, as defined in one of the
-    <A
-HREF="filter-file.html"
->filter files</A
->.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Server-header filters are applied to each header on its own, not to
-    all at once. This makes it easier to diagnose problems, but on the downside
-    you can't write filters that only change header x if header y's value is z.
-    You can do that by using tags though.
-   </P
-><P
->    Server-header filters are executed after the other header actions have finished
-    and use their output as input.
-   </P
-><P
->    Please refer to the <A
-HREF="filter-file.html"
->filter file chapter</A
->
-    to learn which server-header filters are available by default, and how to
-    create your own.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{+server-header-filter{html-to-xml}}
-example.org/xml-instance-that-is-delivered-as-html
-
-{+server-header-filter{xml-to-html}}
-example.org/instance-that-is-delivered-as-xml-but-is-not
-    </PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SERVER-HEADER-TAGGER"
->8.5.31. server-header-tagger</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->   Enable or disable filters based on the Content-Type header.
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Server headers to which this action applies are filtered on-the-fly through
-    the specified regular expression based substitutions, the result is used as
-    tag.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    The name of a server-header tagger, as defined in one of the
-    <A
-HREF="filter-file.html"
->filter files</A
->.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Server-header taggers are applied to each header on its own,
-    and as the header isn't modified, each tagger <SPAN
-CLASS="QUOTE"
->"sees"</SPAN
->
-    the original.
-   </P
-><P
->    Server-header taggers are executed before all other header actions
-    that modify server headers. Their tags can be used to control
-    all of the other server-header actions, the content filters
-    and the crunch actions (<A
-HREF="actions-file.html#REDIRECT"
->redirect</A
->
-    and <A
-HREF="actions-file.html#BLOCK"
->block</A
->).
-   </P
-><P
->    Obviously crunching based on tags created by server-header taggers
-    doesn't prevent the request from showing up in the server's log file.
-   </P
-></DD
-><DT
->Example usage (section):</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Tag every request with the content type declared by the server
-{+server-header-tagger{content-type}}
-/
-    </PRE
-></TD
-></TR
-></TABLE
->
-    </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SESSION-COOKIES-ONLY"
->8.5.32. session-cookies-only</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->    Allow only temporary <SPAN
-CLASS="QUOTE"
->"session"</SPAN
-> cookies (for the current
-    browser session <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->only</I
-></SPAN
->). 
-   </P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->    Deletes the <SPAN
-CLASS="QUOTE"
->"expires"</SPAN
-> field from <SPAN
-CLASS="QUOTE"
->"Set-Cookie:"</SPAN
->
-    server headers. Most browsers will not store such cookies permanently and
-    forget them in between sessions.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Boolean.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
->    N/A
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This is less strict than <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-></TT
-> / 
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
-></TT
-> and allows you to browse
-    websites that insist or rely on setting cookies, without compromising your privacy too badly.
-   </P
-><P
->    Most browsers will not permanently store cookies that have been processed by
-    <TT
-CLASS="LITERAL"
->session-cookies-only</TT
-> and will forget about them between sessions.
-    This makes profiling cookies useless, but won't break sites which require cookies so
-    that you can log in for transactions. This is generally turned on for all 
-    sites, and is the recommended setting.
-   </P
-><P
->    It makes <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->no sense at all</I
-></SPAN
-> to use <TT
-CLASS="LITERAL"
->session-cookies-only</TT
->
-    together with <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-></TT
-> or
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
-></TT
->. If you do, cookies
-    will be plainly killed.
-   </P
-><P
->    Note that it is up to the browser how it handles such cookies without an <SPAN
-CLASS="QUOTE"
->"expires"</SPAN
->
-    field. If you use an exotic browser, you might want to try it out to be sure.
-   </P
-><P
->    This setting also has no effect on cookies that may have been stored
-    previously by the browser before starting <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-    These would have to be removed manually.
-   </P
-><P
->     <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> also uses  
-     the <A
-HREF="actions-file.html#FILTER-CONTENT-COOKIES"
->content-cookies filter</A
-> 
-     to block some types of cookies. Content cookies are not effected by 
-     <TT
-CLASS="LITERAL"
->session-cookies-only</TT
->.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->     <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+session-cookies-only</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SET-IMAGE-BLOCKER"
->8.5.33. set-image-blocker</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Typical use:</DT
-><DD
-><P
->Choose the replacement for blocked images</P
-></DD
-><DT
->Effect:</DT
-><DD
-><P
->     This action alone doesn't do anything noticeable. If <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
->
-     <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
-> <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->also</I
-></SPAN
->
-     apply, i.e. if the request is to be blocked as an image,
-     <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->then</I
-></SPAN
-> the parameter of this action decides what will be
-     sent as a replacement.
-   </P
-></DD
-><DT
->Type:</DT
-><DD
-><P
->Parameterized.</P
-></DD
-><DT
->Parameter:</DT
-><DD
-><P
-></P
-><UL
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"pattern"</SPAN
-> to send a built-in checkerboard pattern image. The image is visually
-      decent, scales very well, and makes it obvious where banners were busted.
-     </P
-></LI
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"blank"</SPAN
-> to send a built-in transparent image. This makes banners disappear
-      completely, but makes it hard to detect where <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has blocked
-      images on a given page and complicates troubleshooting if <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-      has blocked innocent images, like navigation icons.
-     </P
-></LI
-><LI
-><P
->      <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="REPLACEABLE"
-><I
->target-url</I
-></TT
->"</SPAN
-> to
-      send a redirect to <TT
-CLASS="REPLACEABLE"
-><I
->target-url</I
-></TT
->. You can redirect
-      to any image anywhere, even in your local filesystem via <SPAN
-CLASS="QUOTE"
->"file:///"</SPAN
-> URL. 
-      (But note that not all browsers support redirecting to a local file system).
-     </P
-><P
->      A good application of redirects is to use special <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->-built-in
-      URLs, which send the built-in images, as <TT
-CLASS="REPLACEABLE"
-><I
->target-url</I
-></TT
->.
-      This has the same visual effect as specifying <SPAN
-CLASS="QUOTE"
->"blank"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"pattern"</SPAN
-> in
-      the first place, but enables your browser to cache the replacement image, instead of requesting
-      it over and over again.
-     </P
-></LI
-></UL
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The URLs for the built-in images are <SPAN
-CLASS="QUOTE"
->"http://config.privoxy.org/send-banner?type=<TT
-CLASS="REPLACEABLE"
-><I
->type</I
-></TT
->"</SPAN
->, where <TT
-CLASS="REPLACEABLE"
-><I
->type</I
-></TT
-> is
-    either <SPAN
-CLASS="QUOTE"
->"blank"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"pattern"</SPAN
->.
-   </P
-><P
->    There is a third (advanced) type, called <SPAN
-CLASS="QUOTE"
->"auto"</SPAN
->. It is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->NOT</I
-></SPAN
-> to be
-    used in <TT
-CLASS="LITERAL"
->set-image-blocker</TT
->, but meant for use from <A
-HREF="filter-file.html"
->filters</A
->.
-    Auto will select the type of image that would have applied to the referring page, had it been an image.
-   </P
-></DD
-><DT
->Example usage:</DT
-><DD
-><P
->    Built-in pattern:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+set-image-blocker{pattern}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    Redirect to the BSD daemon:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+set-image-blocker{http://www.freebsd.org/gifs/dae_up3.gif}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    Redirect to the built-in pattern for better caching:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->+set-image-blocker{http://config.privoxy.org/send-banner?type=pattern}</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="AEN4093"
->8.5.34. Summary</A
-></H3
-><P
-> Note that many of these actions have the potential to cause a page to
- misbehave, possibly even not to display at all. There are many ways 
- a site designer may choose to design his site, and what HTTP header 
- content, and other criteria, he may depend on. There is no way to have hard
- and fast rules for all sites. See the <A
-HREF="appendix.html#ACTIONSANAT"
->Appendix</A
-> for a brief example on troubleshooting
- actions.</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="ALIASES"
->8.6. Aliases</A
-></H2
-><P
-> Custom <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
->, known to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- as <SPAN
-CLASS="QUOTE"
->"aliases"</SPAN
->, can be defined by combining other actions.
- These can in turn be invoked just like the built-in actions.
- Currently, an alias name can contain any character except space, tab,
- <SPAN
-CLASS="QUOTE"
->"="</SPAN
->,
- <SPAN
-CLASS="QUOTE"
->"{"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"}"</SPAN
->, but we <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->strongly 
- recommend</I
-></SPAN
-> that you only use <SPAN
-CLASS="QUOTE"
->"a"</SPAN
-> to <SPAN
-CLASS="QUOTE"
->"z"</SPAN
->,
- <SPAN
-CLASS="QUOTE"
->"0"</SPAN
-> to <SPAN
-CLASS="QUOTE"
->"9"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"+"</SPAN
->, and <SPAN
-CLASS="QUOTE"
->"-"</SPAN
->.
- Alias names are not case sensitive, and are not required to start with a
- <SPAN
-CLASS="QUOTE"
->"+"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"-"</SPAN
-> sign, since they are merely textually
- expanded.</P
-><P
-> Aliases can be used throughout the actions file, but they <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->must be
- defined in a special section at the top of the file!</I
-></SPAN
->
- And there can only be one such section per actions file. Each actions file may
- have its own alias section, and the aliases defined in it are only visible
- within that file.</P
-><P
-> There are two main reasons to use aliases: One is to save typing for frequently
- used combinations of actions, the other one is a gain in flexibility: If you
- decide once how you want to handle shops by defining an alias called
- <SPAN
-CLASS="QUOTE"
->"shop"</SPAN
->, you can later change your policy on shops in
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->one</I
-></SPAN
-> place, and your changes will take effect everywhere
- in the actions file where the <SPAN
-CLASS="QUOTE"
->"shop"</SPAN
-> alias is used. Calling aliases
- by their purpose also makes your actions files more readable.</P
-><P
-> Currently, there is one big drawback to using aliases, though:
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s built-in web-based action file
- editor honors aliases when reading the actions files, but it expands
- them before writing. So the effects of your aliases are of course preserved,
- but the aliases themselves are lost when you edit sections that use aliases
- with it.</P
-><P
-> Now let's define some aliases...</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # Useful custom aliases we can use later.
- #
- # Note the (required!) section header line and that this section
- # must be at the top of the actions file!
- #
- {{alias}}
-
- # These aliases just save typing later:
- # (Note that some already use other aliases!)
- #
- +crunch-all-cookies = +<A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-> +<A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
->
- -crunch-all-cookies = -<A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-> -<A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
->
- +block-as-image      = +block{Blocked image.} +handle-as-image
- allow-all-cookies   = -crunch-all-cookies -<A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
->session-cookies-only</A
-> -<A
-HREF="actions-file.html#FILTER-CONTENT-COOKIES"
->filter{content-cookies}</A
->
-
- # These aliases define combinations of actions
- # that are useful for certain types of sites:
- #
- fragile     = -<A
-HREF="actions-file.html#BLOCK"
->block</A
-> -<A
-HREF="actions-file.html#FILTER"
->filter</A
-> -crunch-all-cookies -<A
-HREF="actions-file.html#FAST-REDIRECTS"
->fast-redirects</A
-> -<A
-HREF="actions-file.html#HIDE-REFERER"
->hide-referrer</A
-> -<A
-HREF="actions-file.html#PREVENT-COMPRESSION"
->prevent-compression</A
->
-
- shop        = -crunch-all-cookies -<A
-HREF="actions-file.html#FILTER-ALL-POPUPS"
->filter{all-popups}</A
->
-
- # Short names for other aliases, for really lazy people ;-)
- #
- c0 = +crunch-all-cookies
- c1 = -crunch-all-cookies</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> ...and put them to use. These sections would appear in the lower part of an 
- actions file and define exceptions to the default actions (as specified further
- up for the <SPAN
-CLASS="QUOTE"
->"/"</SPAN
-> pattern):</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # These sites are either very complex or very keen on
- # user data and require minimal interference to work:
- #
- {fragile}
- .office.microsoft.com
- .windowsupdate.microsoft.com
- # Gmail is really mail.google.com, not gmail.com
- mail.google.com
-
- # Shopping sites:
- # Allow cookies (for setting and retrieving your customer data)
- #           
- {shop}
- .quietpc.com
- .worldpay.com   # for quietpc.com
- mybank.example.com
-
- # These shops require pop-ups:
- #
- {-filter{all-popups} -filter{unsolicited-popups}}
-  .dabs.com
-  .overclockers.co.uk</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Aliases like <SPAN
-CLASS="QUOTE"
->"shop"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"fragile"</SPAN
-> are typically used for 
- <SPAN
-CLASS="QUOTE"
->"problem"</SPAN
-> sites that require more than one action to be disabled 
- in order to function properly.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="ACT-EXAMPLES"
->8.7. Actions Files Tutorial</A
-></H2
-><P
-> The above chapters have shown <A
-HREF="actions-file.html"
->which actions files
- there are and how they are organized</A
->, how actions are <A
-HREF="actions-file.html#ACTIONS"
->specified</A
-> and <A
-HREF="actions-file.html#ACTIONS-APPLY"
->applied
- to URLs</A
->, how <A
-HREF="actions-file.html#AF-PATTERNS"
->patterns</A
-> work, and how to
- define and use <A
-HREF="actions-file.html#ALIASES"
->aliases</A
->. Now, let's look at an
- example <TT
-CLASS="FILENAME"
->match-all.action</TT
->, <TT
-CLASS="FILENAME"
->default.action</TT
->
- and <TT
-CLASS="FILENAME"
->user.action</TT
-> file and see how all these pieces come together:</P
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="AEN4157"
->8.7.1. match-all.action</A
-></H3
-><P
-> Remember <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all actions are disabled when matching starts</I
-></SPAN
->,
- so we have to explicitly enable the ones we want.</P
-><P
-> While the <TT
-CLASS="FILENAME"
->match-all.action</TT
-> file only contains a
- single section, it is probably the most important one. It has only one
- pattern, <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->/</TT
->"</SPAN
->, but this pattern
- <A
-HREF="actions-file.html#AF-PATTERNS"
->matches all URLs</A
->. Therefore, the set of
- actions used in this <SPAN
-CLASS="QUOTE"
->"default"</SPAN
-> section <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->will
- be applied to all requests as a start</I
-></SPAN
->. It can  be partly or
- wholly overridden by other actions files like <TT
-CLASS="FILENAME"
->default.action</TT
->
- and <TT
-CLASS="FILENAME"
->user.action</TT
->, but it will still be largely responsible
- for your overall browsing experience.</P
-><P
-> Again, at the start of matching, all actions are disabled, so there is
- no need to disable any actions here. (Remember: a <SPAN
-CLASS="QUOTE"
->"+"</SPAN
->
- preceding the action name enables the action, a <SPAN
-CLASS="QUOTE"
->"-"</SPAN
-> disables!).
- Also note how this long line has been made more readable by splitting it into
- multiple lines with line continuation.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ \
- +<A
-HREF="actions-file.html#CHANGE-X-FORWARDED-FOR"
->change-x-forwarded-for{block}</A
-> \
- +<A
-HREF="actions-file.html#HIDE-FROM-HEADER"
->hide-from-header{block}</A
-> \
- +<A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker{pattern}</A
-> \
-}
-/ # Match all URLs
- </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The default behavior is now set.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="AEN4179"
->8.7.2. default.action</A
-></H3
-><P
-> If you aren't a developer, there's no need for you to edit the
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file. It is maintained by
- the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developers and if you disagree with some of the
- sections, you should overrule them in your <TT
-CLASS="FILENAME"
->user.action</TT
->.</P
-><P
-> Understanding the <TT
-CLASS="FILENAME"
->default.action</TT
-> file can
- help you with your <TT
-CLASS="FILENAME"
->user.action</TT
->, though.</P
-><P
-> The first section in this file is a special section for internal use
- that prevents older <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> versions from reading the file:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->##########################################################################
-# Settings -- Don't change! For internal Privoxy use ONLY.
-##########################################################################
-{{settings}}
-for-privoxy-version=3.0.11</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> After that comes the (optional) alias section. We'll use the example
- section from the above <A
-HREF="actions-file.html#ALIASES"
->chapter on aliases</A
->,
- that also explains why and how aliases are used:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->##########################################################################
-# Aliases
-##########################################################################
-{{alias}}
-
- # These aliases just save typing later:
- # (Note that some already use other aliases!)
- #
- +crunch-all-cookies = +<A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-> +<A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
->
- -crunch-all-cookies = -<A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-> -<A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
->
- +block-as-image      = +block{Blocked image.} +handle-as-image
- mercy-for-cookies   = -crunch-all-cookies -<A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
->session-cookies-only</A
-> -<A
-HREF="actions-file.html#FILTER-CONTENT-COOKIES"
->filter{content-cookies}</A
->
-
- # These aliases define combinations of actions
- # that are useful for certain types of sites:
- #
- fragile     = -<A
-HREF="actions-file.html#BLOCK"
->block</A
-> -<A
-HREF="actions-file.html#FILTER"
->filter</A
-> -crunch-all-cookies -<A
-HREF="actions-file.html#FAST-REDIRECTS"
->fast-redirects</A
-> -<A
-HREF="actions-file.html#HIDE-REFERER"
->hide-referrer</A
->
- shop        = -crunch-all-cookies -<A
-HREF="actions-file.html#FILTER-ALL-POPUPS"
->filter{all-popups}</A
-></PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The first of our specialized sections is concerned with <SPAN
-CLASS="QUOTE"
->"fragile"</SPAN
->
- sites, i.e. sites that require minimum interference, because they are either
- very complex or very keen on tracking you (and have mechanisms in place that
- make them unusable for people who avoid being tracked). We will simply use
- our pre-defined <TT
-CLASS="LITERAL"
->fragile</TT
-> alias instead of stating the list
- of actions explicitly:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->##########################################################################
-# Exceptions for sites that'll break under the default action set:
-##########################################################################
-
-# "Fragile" Use a minimum set of actions for these sites (see alias above):
-#
-{ fragile }
-.office.microsoft.com           # surprise, surprise!
-.windowsupdate.microsoft.com
-mail.google.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Shopping sites are not as fragile, but they typically
- require cookies to log in, and pop-up windows for shopping
- carts or item details. Again, we'll use a pre-defined alias:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Shopping sites:
-#
-{ shop }
-.quietpc.com 
-.worldpay.com   # for quietpc.com
-.jungle.com
-.scan.co.uk</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FAST-REDIRECTS"
->fast-redirects</A
-></TT
->
- action, which may have been enabled in <TT
-CLASS="FILENAME"
->match-all.action</TT
->,
- breaks some sites. So disable it for popular sites where we know it misbehaves:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ -<A
-HREF="actions-file.html#FAST-REDIRECTS"
->fast-redirects</A
-> }
-login.yahoo.com
-edit.*.yahoo.com
-.google.com
-.altavista.com/.*(like|url|link):http
-.altavista.com/trans.*urltext=http
-.nytimes.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> It is important that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> knows which
- URLs belong to images, so that <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->if</I
-></SPAN
-> they are to
- be blocked, a substitute image can be sent, rather than an HTML page.
- Contacting the remote site to find out is not an option, since it
- would destroy the loading time advantage of banner blocking, and it
- would feed the advertisers information about you. We can mark any
- URL as an image with the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
-> action,
- and marking all URLs that end in a known image file extension is a
- good start:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->##########################################################################
-# Images:
-##########################################################################
-
-# Define which file types will be treated as images, in case they get
-# blocked further down this file:
-#
-{ +<A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-> }
-/.*\.(gif|jpe?g|png|bmp|ico)$</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> And then there are known banner sources. They often use scripts to
- generate the banners, so it won't be visible from the URL that the
- request is for an image. Hence we block them <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
->
- mark them as images in one go, with the help of our
- <TT
-CLASS="LITERAL"
->+block-as-image</TT
-> alias defined above. (We could of
- course just as well use <TT
-CLASS="LITERAL"
->+<A
-HREF="actions-file.html#BLOCK"
->block</A
->
- +<A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
-> here.)
- Remember that the type of the replacement image is chosen by the
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></TT
->
- action. Since all URLs have matched the default section with its
- <TT
-CLASS="LITERAL"
->+<A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
->{pattern}</TT
->
- action before, it still applies and needn't be repeated:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Known ad generators:
-#
-{ +block-as-image }
-ar.atwola.com 
-.ad.doubleclick.net
-.ad.*.doubleclick.net
-.a.yimg.com/(?:(?!/i/).)*$
-.a[0-9].yimg.com/(?:(?!/i/).)*$
-bs*.gsanet.com
-.qkimg.net</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> One of the most important jobs of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- is to block banners. Many of these can be <SPAN
-CLASS="QUOTE"
->"blocked"</SPAN
->
- by the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
->{banners-by-size}</TT
->
- action, which we enabled above, and which deletes the references to banner
- images from the pages while they are loaded, so the browser doesn't request
- them anymore, and hence they don't need to be blocked here. But this naturally
- doesn't catch all banners, and some people choose not to use filters, so we
- need a comprehensive list of patterns for banner URLs here, and apply the
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> action to them.</P
-><P
-> First comes many generic patterns, which do most of the work, by
- matching typical domain and path name components of banners. Then comes
- a list of individual patterns for specific sites, which is omitted here
- to keep the example short:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->##########################################################################
-# Block these fine banners:
-##########################################################################
-{ <A
-HREF="actions-file.html#BLOCK"
->+block{Banner ads.}</A
-> }
-
-# Generic patterns:
-# 
-ad*.
-.*ads.
-banner?.
-count*.
-/.*count(er)?\.(pl|cgi|exe|dll|asp|php[34]?)
-/(?:.*/)?(publicite|werbung|rekla(ma|me|am)|annonse|maino(kset|nta|s)?)/
-
-# Site-specific patterns (abbreviated):
-#
-.hitbox.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> It's quite remarkable how many advertisers actually call their banner
- servers ads.<TT
-CLASS="REPLACEABLE"
-><I
->company</I
-></TT
->.com, or call the directory
- in which the banners are stored simply <SPAN
-CLASS="QUOTE"
->"banners"</SPAN
->. So the above
- generic patterns are surprisingly effective.</P
-><P
-> But being very generic, they necessarily also catch URLs that we don't want
- to block. The pattern <TT
-CLASS="LITERAL"
->.*ads.</TT
-> e.g. catches 
- <SPAN
-CLASS="QUOTE"
->"nasty-<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->ads</I
-></SPAN
->.nasty-corp.com"</SPAN
-> as intended,
- but also <SPAN
-CLASS="QUOTE"
->"downlo<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->ads</I
-></SPAN
->.sourcefroge.net"</SPAN
-> or
- <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->ads</I
-></SPAN
->l.some-provider.net."</SPAN
-> So here come some
- well-known exceptions to the <TT
-CLASS="LITERAL"
->+<A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->
- section above.</P
-><P
-> Note that these are exceptions to exceptions from the default! Consider the URL
- <SPAN
-CLASS="QUOTE"
->"downloads.sourcefroge.net"</SPAN
->: Initially, all actions are deactivated,
- so it wouldn't get blocked. Then comes the defaults section, which matches the
- URL, but just deactivates the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->
- action once again. Then it matches <TT
-CLASS="LITERAL"
->.*ads.</TT
->, an exception to the
- general non-blocking policy, and suddenly
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->+block</A
-></TT
-> applies. And now, it'll match
- <TT
-CLASS="LITERAL"
->.*loads.</TT
->, where <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->-block</A
-></TT
->
- applies, so (unless it matches <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->again</I
-></SPAN
-> further down) it ends up
- with no <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> action applying.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->##########################################################################
-# Save some innocent victims of the above generic block patterns:
-##########################################################################
-
-# By domain:
-# 
-{ -<A
-HREF="actions-file.html#BLOCK"
->block</A
-> }
-adv[io]*.  # (for advogato.org and advice.*)
-adsl.      # (has nothing to do with ads)
-adobe.     # (has nothing to do with ads either)
-ad[ud]*.   # (adult.* and add.*)
-.edu       # (universities don't host banners (yet!))
-.*loads.   # (downloads, uploads etc)
-
-# By path:
-#
-/.*loads/
-
-# Site-specific:
-#
-www.globalintersec.com/adv # (adv = advanced)
-www.ugu.com/sui/ugu/adv</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Filtering source code can have nasty side effects,
- so make an exception for our friends at sourceforge.net,
- and all paths with <SPAN
-CLASS="QUOTE"
->"cvs"</SPAN
-> in them. Note that
- <TT
-CLASS="LITERAL"
->-<A
-HREF="actions-file.html#FILTER"
->filter</A
-></TT
->
- disables <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> filters in one fell swoop!</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Don't filter code!
-#
-{ -<A
-HREF="actions-file.html#FILTER"
->filter</A
-> }
-/(.*/)?cvs
-bugzilla.
-developer.
-wiki.
-.sourceforge.net</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The actual <TT
-CLASS="FILENAME"
->default.action</TT
-> is of course much more
- comprehensive, but we hope this example made clear how it works.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="AEN4292"
->8.7.3. user.action</A
-></H3
-><P
-> So far we are painting with a broad brush by setting general policies,
- which would be a reasonable starting point for many people. Now, 
- you might want to be more specific and have customized rules that
- are more suitable to your personal habits and preferences. These would
- be for narrowly defined situations like your ISP or your bank, and should
- be placed in <TT
-CLASS="FILENAME"
->user.action</TT
->, which is parsed after all other 
- actions files and hence has the last word, over-riding any previously
- defined actions. <TT
-CLASS="FILENAME"
->user.action</TT
-> is also a 
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->safe</I
-></SPAN
-> place for your personal settings, since
- <TT
-CLASS="FILENAME"
->default.action</TT
-> is actively maintained by the
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developers and you'll probably want
- to install updated versions from time to time.</P
-><P
-> So let's look at a few examples of things that one might typically do in
- <TT
-CLASS="FILENAME"
->user.action</TT
->: </P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># My user.action file. &#60;fred@xxxxxxxxxxx&#62;</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> As <A
-HREF="actions-file.html#ALIASES"
->aliases</A
-> are local to the actions
- file that they are defined in, you can't use the ones from
- <TT
-CLASS="FILENAME"
->default.action</TT
->, unless you repeat them here:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Aliases are local to the file they are defined in.
-# (Re-)define aliases for this file:
-#
-{{alias}}
-# 
-# These aliases just save typing later, and the alias names should 
-# be self explanatory.
-#
-+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
--crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
- allow-all-cookies  = -crunch-all-cookies -session-cookies-only
- allow-popups       = -filter{all-popups}
-+block-as-image     = +block{Blocked as image.} +handle-as-image
--block-as-image     = -block
-
-# These aliases define combinations of actions that are useful for
-# certain types of sites:
-#
-fragile     = -block -crunch-all-cookies -filter -fast-redirects -hide-referrer
-shop        = -crunch-all-cookies allow-popups
-
-# Allow ads for selected useful free sites:
-#
-allow-ads   = -block -filter{banners-by-size} -filter{banners-by-link}
-
-# Alias for specific file types that are text, but might have conflicting
-# MIME types. We want the browser to force these to be text documents.
-handle-as-text = -<A
-HREF="actions-file.html#FILTER"
->filter</A
-> +-<A
-HREF="actions-file.html#CONTENT-TYPE-OVERWRITE"
->content-type-overwrite{text/plain}</A
-> +-<A
-HREF="actions-file.html#FORCE-TEXT-MODE"
->force-text-mode</A
-> -<A
-HREF="actions-file.html#HIDE-CONTENT-DISPOSITION"
->hide-content-disposition</A
-></PRE
-></TD
-></TR
-></TABLE
->&#13;</P
-><P
-> Say you have accounts on some sites that you visit regularly, and
- you don't want to have to log in manually each time. So you'd like
- to allow persistent cookies for these sites. The
- <TT
-CLASS="LITERAL"
->allow-all-cookies</TT
-> alias defined above does exactly
- that, i.e. it disables crunching of cookies in any direction, and the 
- processing of cookies to make them only temporary.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ allow-all-cookies }
- sourceforge.net
- .yahoo.com
- .msdn.microsoft.com
- .redhat.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Your bank is allergic to some filter, but you don't know which, so you disable them all:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ -<A
-HREF="actions-file.html#FILTER"
->filter</A
-> }
- .your-home-banking-site.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Some file types you may not want to filter for various reasons:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Technical documentation is likely to contain strings that might
-# erroneously get altered by the JavaScript-oriented filters:
-#
-.tldp.org
-/(.*/)?selfhtml/
-
-# And this stupid host sends streaming video with a wrong MIME type,
-# so that Privoxy thinks it is getting HTML and starts filtering:
-#
-stupid-server.example.com/</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Example of a simple <A
-HREF="actions-file.html#BLOCK"
->block</A
-> action. Say you've
- seen an ad on your favourite page on example.com that you want to get rid of.
- You have right-clicked the image, selected <SPAN
-CLASS="QUOTE"
->"copy image location"</SPAN
->
- and pasted the URL below while removing the leading http://, into a 
- <TT
-CLASS="LITERAL"
->{ +block{} }</TT
-> section. Note that <TT
-CLASS="LITERAL"
->{ +handle-as-image
- }</TT
-> need not be specified, since all URLs ending in
- <TT
-CLASS="LITERAL"
->.gif</TT
-> will be tagged as images by the general rules as set
- in default.action anyway:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ +<A
-HREF="actions-file.html#BLOCK"
->block</A
->{Nasty ads.} }
- www.example.com/nasty-ads/sponsor\.gif
- another.example.net/more/junk/here/</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The URLs of dynamically generated banners, especially from large banner
- farms, often don't use the well-known image file name extensions, which
- makes it impossible for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to guess
- the file type just by looking at the URL. 
- You can use the <TT
-CLASS="LITERAL"
->+block-as-image</TT
-> alias defined above for
- these cases.
- Note that objects which match this rule but then turn out NOT to be an
- image are typically rendered as a <SPAN
-CLASS="QUOTE"
->"broken image"</SPAN
-> icon by the
- browser. Use cautiously.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ +block-as-image }
- .doubleclick.net
- .fastclick.net
- /Realmedia/ads/
- ar.atwola.com/</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Now you noticed that the default configuration breaks Forbes Magazine,
- but you were too lazy to find out which action is the culprit, and you
- were again too lazy to give <A
-HREF="contact.html"
->feedback</A
->, so
- you just used the <TT
-CLASS="LITERAL"
->fragile</TT
-> alias on the site, and
- -- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->whoa!</I
-></SPAN
-> -- it worked. The <TT
-CLASS="LITERAL"
->fragile</TT
->
- aliases disables those actions that are most likely to break a site. Also,
- good for testing purposes to see if it is <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- that is causing the problem or not. We later find other regular sites 
- that misbehave, and add those to our personalized list of troublemakers:</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ fragile }
- .forbes.com
- webmail.example.com
- .mybank.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> You like the <SPAN
-CLASS="QUOTE"
->"fun"</SPAN
-> text replacements in <TT
-CLASS="FILENAME"
->default.filter</TT
->,
- but it is disabled in the distributed actions file.
- So you'd like to turn it on in your private,
- update-safe config, once and for all:</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ +<A
-HREF="actions-file.html#FILTER-FUN"
->filter{fun}</A
-> }
- / # For ALL sites!</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Note that the above is not really a good idea: There are exceptions
- to the filters in <TT
-CLASS="FILENAME"
->default.action</TT
-> for things that
- really shouldn't be filtered, like code on CVS-&#62;Web interfaces. Since
- <TT
-CLASS="FILENAME"
->user.action</TT
-> has the last word, these exceptions
- won't be valid for the <SPAN
-CLASS="QUOTE"
->"fun"</SPAN
-> filtering specified here.</P
-><P
-> You might also worry about how your favourite free websites are
- funded, and find that they rely on displaying banner advertisements
- to survive. So you might want to specifically allow banners for those
- sites that you feel provide value to you:</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ allow-ads }
- .sourceforge.net
- .slashdot.org
- .osdn.net</PRE
-></TD
-></TR
-></TABLE
->   </P
-><P
-> Note that <TT
-CLASS="LITERAL"
->allow-ads</TT
-> has been aliased to 
- <TT
-CLASS="LITERAL"
->-<A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->, 
- <TT
-CLASS="LITERAL"
->-<A
-HREF="actions-file.html#FILTER-BANNERS-BY-SIZE"
->filter{banners-by-size}</A
-></TT
->, and 
- <TT
-CLASS="LITERAL"
->-<A
-HREF="actions-file.html#FILTER-BANNERS-BY-LINK"
->filter{banners-by-link}</A
-></TT
-> above.</P
-><P
-> Invoke another alias here to force an over-ride of the MIME type <TT
-CLASS="LITERAL"
-> application/x-sh</TT
-> which typically would open a download type 
- dialog. In my case, I want to look at the shell script, and then I can save
- it should I choose to.</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ handle-as-text }
- /.*\.sh$</PRE
-></TD
-></TR
-></TABLE
->   </P
-><P
-> <TT
-CLASS="FILENAME"
->user.action</TT
-> is generally the best place to define
- exceptions and additions to the default policies of
- <TT
-CLASS="FILENAME"
->default.action</TT
->. Some actions are safe to have their
- default policies set here though. So let's set a default policy to have a
- <SPAN
-CLASS="QUOTE"
->"blank"</SPAN
-> image as opposed to the checkerboard pattern for
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->ALL</I
-></SPAN
-> sites. <SPAN
-CLASS="QUOTE"
->"/"</SPAN
-> of course matches all URL
- paths and patterns:</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->{ +<A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker{blank}</A
-> }
-/ # ALL sites</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="config.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="filter-file.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->The Main Configuration File</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Filter Files</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/appendix.html b/external/privoxy/doc/webserver/user-manual/appendix.html
deleted file mode 100644
index 4df57a4..0000000
--- a/external/privoxy/doc/webserver/user-manual/appendix.html
+++ /dev/null
@@ -1,2187 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Appendix</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="See Also"
-HREF="seealso.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="seealso.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
->&nbsp;</TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="APPENDIX"
->14. Appendix</A
-></H1
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="REGEX"
->14.1. Regular Expressions</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> uses Perl-style <SPAN
-CLASS="QUOTE"
->"regular
- expressions"</SPAN
-> in its <A
-HREF="actions-file.html"
->actions
- files</A
-> and <A
-HREF="filter-file.html"
->filter file</A
->,
- through the <A
-HREF="http://www.pcre.org/";
-TARGET="_top"
->PCRE</A
-> and
- <SPAN
-CLASS="APPLICATION"
->PCRS</SPAN
-> libraries.</P
-><P
-> If you are reading this, you probably don't understand what <SPAN
-CLASS="QUOTE"
->"regular
- expressions"</SPAN
-> are, or what they can do. So this will be a very brief
- introduction only. A full explanation would require a <A
-HREF="http://www.oreilly.com/catalog/regex/";
-TARGET="_top"
->book</A
-> ;-)</P
-><P
-> Regular expressions provide a language to describe patterns that can be
- run against strings of characters (letter, numbers, etc), to see if they
- match the string or not. The  patterns are themselves (sometimes complex)
- strings of literal characters, combined with  wild-cards, and other special
- characters, called meta-characters. The <SPAN
-CLASS="QUOTE"
->"meta-characters"</SPAN
-> have
- special meanings and are used to build complex patterns to be matched against.
- Perl Compatible Regular Expressions are an especially convenient
- <SPAN
-CLASS="QUOTE"
->"dialect"</SPAN
-> of the regular expression language.</P
-><P
-> To make a simple analogy, we do something similar when we use wild-card
- characters when listing files with the <B
-CLASS="COMMAND"
->dir</B
-> command in DOS. 
- <TT
-CLASS="LITERAL"
->*.*</TT
-> matches all filenames. The <SPAN
-CLASS="QUOTE"
->"special"</SPAN
->
- character here is the asterisk which matches any and all characters. We can be
- more specific and use <TT
-CLASS="LITERAL"
->?</TT
-> to match just individual
- characters. So <SPAN
-CLASS="QUOTE"
->"dir file?.text"</SPAN
-> would match
- <SPAN
-CLASS="QUOTE"
->"file1.txt"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"file2.txt"</SPAN
->, etc. We are pattern
- matching, using a similar technique to <SPAN
-CLASS="QUOTE"
->"regular expressions"</SPAN
->!</P
-><P
-> Regular expressions do essentially the same thing, but are much, much more
- powerful. There are many more <SPAN
-CLASS="QUOTE"
->"special characters"</SPAN
-> and ways of 
- building complex patterns however. Let's look at a few of the common ones,
- and then some examples:</P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->.</I
-></SPAN
-> - Matches any single character, e.g. <SPAN
-CLASS="QUOTE"
->"a"</SPAN
->,
-  <SPAN
-CLASS="QUOTE"
->"A"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"4"</SPAN
->, <SPAN
-CLASS="QUOTE"
->":"</SPAN
->, or <SPAN
-CLASS="QUOTE"
->"@"</SPAN
->.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->?</I
-></SPAN
-> - The preceding character or expression is matched ZERO or ONE
-  times. Either/or.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->+</I
-></SPAN
-> - The preceding character or expression is matched ONE or MORE
-  times.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->*</I
-></SPAN
-> - The preceding character or expression is matched ZERO or MORE
-  times.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->\</I
-></SPAN
-> - The <SPAN
-CLASS="QUOTE"
->"escape"</SPAN
-> character denotes that
-  the following character should be taken literally. This is used where one of the 
-  special characters (e.g. <SPAN
-CLASS="QUOTE"
->"."</SPAN
->) needs to be taken literally and
-  not as a special meta-character. Example: <SPAN
-CLASS="QUOTE"
->"example\.com"</SPAN
->, makes 
-  sure the period is recognized only as a period (and not expanded to its 
-  meta-character meaning of any single character).
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->[ ]</I
-></SPAN
-> - Characters enclosed in brackets will be matched if
-  any of the enclosed characters are encountered. For instance, <SPAN
-CLASS="QUOTE"
->"[0-9]"</SPAN
->
-  matches any numeric digit (zero through nine). As an example, we can combine 
-  this with <SPAN
-CLASS="QUOTE"
->"+"</SPAN
-> to match any digit one of more times: <SPAN
-CLASS="QUOTE"
->"[0-9]+"</SPAN
->.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->( )</I
-></SPAN
-> - parentheses are used to group a sub-expression,
-  or multiple sub-expressions.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->|</I
-></SPAN
-> - The <SPAN
-CLASS="QUOTE"
->"bar"</SPAN
-> character works like an
-  <SPAN
-CLASS="QUOTE"
->"or"</SPAN
-> conditional statement. A match is successful if the
-  sub-expression on either side of <SPAN
-CLASS="QUOTE"
->"|"</SPAN
-> matches. As an example:
-  <SPAN
-CLASS="QUOTE"
->"/(this|that) example/"</SPAN
-> uses grouping and the bar character 
-  and would match either <SPAN
-CLASS="QUOTE"
->"this example"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"that
-  example"</SPAN
->, and nothing else.
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></P
-><P
-> These are just some of the ones you are likely to use when matching URLs with 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and is a long way from a definitive
- list. This is enough to get us started with a few simple examples which may
- be more illuminating:</P
-><P
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
-><TT
-CLASS="LITERAL"
->/.*/banners/.*</TT
-></I
-></SPAN
-> - A  simple example
- that uses the common combination of <SPAN
-CLASS="QUOTE"
->"."</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"*"</SPAN
-> to 
- denote any character, zero or more times. In other words, any string at all.
- So we start with a literal forward slash, then our regular expression pattern 
- (<SPAN
-CLASS="QUOTE"
->".*"</SPAN
->) another literal forward slash, the string
- <SPAN
-CLASS="QUOTE"
->"banners"</SPAN
->, another forward slash, and lastly another
- <SPAN
-CLASS="QUOTE"
->".*"</SPAN
->. We are building 
- a directory path here. This will match any file with the path that has a
- directory named <SPAN
-CLASS="QUOTE"
->"banners"</SPAN
-> in it. The <SPAN
-CLASS="QUOTE"
->".*"</SPAN
-> matches
- any characters, and this could conceivably be more forward slashes, so it
- might expand into a much longer looking path. For example, this could match:
- <SPAN
-CLASS="QUOTE"
->"/eye/hate/spammers/banners/annoy_me_please.gif"</SPAN
->, or just
- <SPAN
-CLASS="QUOTE"
->"/banners/annoying.html"</SPAN
->, or almost an infinite number of other
- possible combinations, just so it has <SPAN
-CLASS="QUOTE"
->"banners"</SPAN
-> in the path
- somewhere.</P
-><P
-> And now something a little more complex:</P
-><P
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
-><TT
-CLASS="LITERAL"
->/.*/adv((er)?ts?|ertis(ing|ements?))?/</TT
-></I
-></SPAN
-> - 
- We have several literal forward slashes again (<SPAN
-CLASS="QUOTE"
->"/"</SPAN
->), so we are
- building another expression that is a file path statement. We have another 
- <SPAN
-CLASS="QUOTE"
->".*"</SPAN
->, so we are matching against any conceivable sub-path, just so
- it matches our expression. The only true literal that <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->must
- match</I
-></SPAN
-> our pattern is <SPAN
-CLASS="APPLICATION"
->adv</SPAN
->, together with
- the forward slashes. What comes after the <SPAN
-CLASS="QUOTE"
->"adv"</SPAN
-> string is the
- interesting part. </P
-><P
-> Remember the <SPAN
-CLASS="QUOTE"
->"?"</SPAN
-> means the preceding expression (either a
- literal character or anything grouped with <SPAN
-CLASS="QUOTE"
->"(...)"</SPAN
-> in this case)
- can exist or not, since this means either zero or one match. So
- <SPAN
-CLASS="QUOTE"
->"((er)?ts?|ertis(ing|ements?))"</SPAN
-> is optional, as are the
- individual sub-expressions: <SPAN
-CLASS="QUOTE"
->"(er)"</SPAN
->,
- <SPAN
-CLASS="QUOTE"
->"(ing|ements?)"</SPAN
->, and the <SPAN
-CLASS="QUOTE"
->"s"</SPAN
->. The <SPAN
-CLASS="QUOTE"
->"|"</SPAN
->
- means <SPAN
-CLASS="QUOTE"
->"or"</SPAN
->. We have two of those. For instance, 
- <SPAN
-CLASS="QUOTE"
->"(ing|ements?)"</SPAN
->, can expand to match either <SPAN
-CLASS="QUOTE"
->"ing"</SPAN
-> 
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->OR</I
-></SPAN
-> <SPAN
-CLASS="QUOTE"
->"ements?"</SPAN
->. What is being done here, is an
- attempt at matching as many variations of <SPAN
-CLASS="QUOTE"
->"advertisement"</SPAN
->, and 
- similar, as possible. So this would expand to match just <SPAN
-CLASS="QUOTE"
->"adv"</SPAN
->,
- or <SPAN
-CLASS="QUOTE"
->"advert"</SPAN
->, or <SPAN
-CLASS="QUOTE"
->"adverts"</SPAN
->, or
- <SPAN
-CLASS="QUOTE"
->"advertising"</SPAN
->, or <SPAN
-CLASS="QUOTE"
->"advertisement"</SPAN
->, or
- <SPAN
-CLASS="QUOTE"
->"advertisements"</SPAN
->. You get the idea. But it would not match 
- <SPAN
-CLASS="QUOTE"
->"advertizements"</SPAN
-> (with a <SPAN
-CLASS="QUOTE"
->"z"</SPAN
->). We could fix that by
- changing our regular expression to: 
- <SPAN
-CLASS="QUOTE"
->"/.*/adv((er)?ts?|erti(s|z)(ing|ements?))?/"</SPAN
->, which would then match
- either spelling.</P
-><P
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
-><TT
-CLASS="LITERAL"
->/.*/advert[0-9]+\.(gif|jpe?g)</TT
-></I
-></SPAN
-> - Again 
- another path statement with forward slashes. Anything in the square brackets 
- <SPAN
-CLASS="QUOTE"
->"[ ]"</SPAN
-> can be matched. This is using <SPAN
-CLASS="QUOTE"
->"0-9"</SPAN
-> as a
- shorthand expression to mean any digit one through nine. It is the same as
- saying <SPAN
-CLASS="QUOTE"
->"0123456789"</SPAN
->. So any digit matches. The <SPAN
-CLASS="QUOTE"
->"+"</SPAN
->
- means one or more of the preceding expression must be included. The preceding 
- expression here is what is in the square brackets -- in this case, any digit 
- one through nine. Then, at the end, we have a grouping: <SPAN
-CLASS="QUOTE"
->"(gif|jpe?g)"</SPAN
->. 
- This includes a <SPAN
-CLASS="QUOTE"
->"|"</SPAN
->, so this needs to match the expression on
- either side of that bar character also. A simple <SPAN
-CLASS="QUOTE"
->"gif"</SPAN
-> on one side, and the other
- side will in turn match either <SPAN
-CLASS="QUOTE"
->"jpeg"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"jpg"</SPAN
->,
- since the <SPAN
-CLASS="QUOTE"
->"?"</SPAN
-> means the letter <SPAN
-CLASS="QUOTE"
->"e"</SPAN
-> is optional and
- can be matched once or not at all. So we are building an expression here to
- match image GIF or JPEG type image file. It must include the literal
- string <SPAN
-CLASS="QUOTE"
->"advert"</SPAN
->, then one or more digits, and a <SPAN
-CLASS="QUOTE"
->"."</SPAN
->
- (which is now a literal, and not a special character, since it is escaped
- with <SPAN
-CLASS="QUOTE"
->"\"</SPAN
->), and lastly either <SPAN
-CLASS="QUOTE"
->"gif"</SPAN
->, or
- <SPAN
-CLASS="QUOTE"
->"jpeg"</SPAN
->, or <SPAN
-CLASS="QUOTE"
->"jpg"</SPAN
->. Some possible matches would
- include: <SPAN
-CLASS="QUOTE"
->"//advert1.jpg"</SPAN
->,
- <SPAN
-CLASS="QUOTE"
->"/nasty/ads/advert1234.gif"</SPAN
->,
- <SPAN
-CLASS="QUOTE"
->"/banners/from/hell/advert99.jpg"</SPAN
->. It would not match
- <SPAN
-CLASS="QUOTE"
->"advert1.gif"</SPAN
-> (no leading slash), or
- <SPAN
-CLASS="QUOTE"
->"/adverts232.jpg"</SPAN
-> (the expression does not include an
- <SPAN
-CLASS="QUOTE"
->"s"</SPAN
->), or <SPAN
-CLASS="QUOTE"
->"/advert1.jsp"</SPAN
-> (<SPAN
-CLASS="QUOTE"
->"jsp"</SPAN
-> is not
- in the expression anywhere).</P
-><P
-> We are barely scratching the surface of regular expressions here so that you
- can understand the default <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- configuration files, and maybe use this knowledge to customize your own
- installation. There is much, much more that can be done with regular
- expressions. Now that you know enough to get started, you can learn more on
- your own :/</P
-><P
-> More reading on Perl Compatible Regular expressions: 
- <A
-HREF="http://perldoc.perl.org/perlre.html";
-TARGET="_top"
->http://perldoc.perl.org/perlre.html</A
-></P
-><P
-> For information on regular expression based substitutions and their applications
- in filters, please see the <A
-HREF="filter-file.html"
->filter file tutorial</A
->
- in this manual.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN5174"
->14.2. Privoxy's Internal Pages</A
-></H2
-><P
-> Since <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> proxies each requested 
- web page, it is easy for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to 
- trap certain special URLs. In this way, we can talk directly to
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and see how it is 
- configured, see how our rules are being applied, change these 
- rules and other configuration options, and even turn
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> filtering off, all with 
- a web browser.&#13;</P
-><P
-> The URLs listed below are the special ones that allow direct access 
- to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. Of course,
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> must be running to access these. If 
- not, you will get a friendly error message. Internet access is not 
- necessary either.</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->  
-   Privoxy main page: 
-  </P
-><A
-NAME="AEN5188"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-     <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
-   </P
-></BLOCKQUOTE
-><P
->   There is a shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
-> (But it
-   doesn't provide a fall-back to a real page, in case the request is not
-   sent through <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->)
-  </P
-></LI
-><LI
-><P
->  
-    Show information about the current configuration, including viewing and 
-    editing of actions files:
-  </P
-><A
-NAME="AEN5196"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-    <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->
-   </P
-></BLOCKQUOTE
-></LI
-><LI
-><P
->  
-    Show the source code version numbers:
-  </P
-><A
-NAME="AEN5201"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-    <A
-HREF="http://config.privoxy.org/show-version";
-TARGET="_top"
->http://config.privoxy.org/show-version</A
->
-   </P
-></BLOCKQUOTE
-></LI
-><LI
-><P
->  
-   Show the browser's request headers:
-  </P
-><A
-NAME="AEN5206"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-    <A
-HREF="http://config.privoxy.org/show-request";
-TARGET="_top"
->http://config.privoxy.org/show-request</A
->
-   </P
-></BLOCKQUOTE
-></LI
-><LI
-><P
->  
-   Show which actions apply to a URL and why:
-  </P
-><A
-NAME="AEN5211"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-    <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->http://config.privoxy.org/show-url-info</A
->
-   </P
-></BLOCKQUOTE
-></LI
-><LI
-><P
->  
-   Toggle Privoxy on or off. This feature can be turned off/on in the main 
-   <TT
-CLASS="FILENAME"
->config</TT
-> file. When toggled <SPAN
-CLASS="QUOTE"
->"off"</SPAN
->, <SPAN
-CLASS="QUOTE"
->"Privoxy"</SPAN
->
-   continues to run, but only as a pass-through proxy, with no actions taking
-   place:
-  </P
-><A
-NAME="AEN5219"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-    <A
-HREF="http://config.privoxy.org/toggle";
-TARGET="_top"
->http://config.privoxy.org/toggle</A
->
-   </P
-></BLOCKQUOTE
-><P
->   Short cuts. Turn off, then on: 
-  </P
-><A
-NAME="AEN5223"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-     <A
-HREF="http://config.privoxy.org/toggle?set=disable";
-TARGET="_top"
->http://config.privoxy.org/toggle?set=disable</A
->
-   </P
-></BLOCKQUOTE
-><A
-NAME="AEN5226"
-></A
-><BLOCKQUOTE
-CLASS="BLOCKQUOTE"
-><P
-> 
-     <A
-HREF="http://config.privoxy.org/toggle?set=enable";
-TARGET="_top"
->http://config.privoxy.org/toggle?set=enable</A
->
-   </P
-></BLOCKQUOTE
-></LI
-></UL
-></P
-><P
-> These may be bookmarked for quick reference. See next.&#13;</P
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="BOOKMARKLETS"
->14.2.1. Bookmarklets</A
-></H3
-><P
-> Below are some <SPAN
-CLASS="QUOTE"
->"bookmarklets"</SPAN
-> to allow you to easily access a
- <SPAN
-CLASS="QUOTE"
->"mini"</SPAN
-> version of some of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
- special pages. They are designed for MS Internet Explorer, but should work
- equally well in Netscape, Mozilla, and other browsers which support
- JavaScript. They are designed to run directly from your bookmarks - not by
- clicking the links below (although that should work for testing).</P
-><P
-> To save them, right-click the link and choose <SPAN
-CLASS="QUOTE"
->"Add to Favorites"</SPAN
->
- (IE) or <SPAN
-CLASS="QUOTE"
->"Add Bookmark"</SPAN
-> (Netscape). You will get a warning that
- the bookmark <SPAN
-CLASS="QUOTE"
->"may not be safe"</SPAN
-> - just click OK. Then you can run the
- Bookmarklet directly from your favorites/bookmarks. For even faster access,
- you can put them on the <SPAN
-CLASS="QUOTE"
->"Links"</SPAN
-> bar (IE) or the <SPAN
-CLASS="QUOTE"
->"Personal
- Toolbar"</SPAN
-> (Netscape), and run them with a single click. </P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <A
-HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&#38;set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());"
-TARGET="_top"
->Privoxy - Enable</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&#38;set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());"
-TARGET="_top"
->Privoxy - Disable</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&#38;set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());"
-TARGET="_top"
->Privoxy - Toggle Privoxy</A
-> (Toggles between enabled and disabled)
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y','ijbstatus','width=250,height=2,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());"
-TARGET="_top"
->Privoxy- View Status</A
->
-   </P
-></LI
-><LI
-><P
->    <A
-HREF="javascript:void(window.open('http://config.privoxy.org/show-url-info?url='+escape(location.href),'Why').focus());"
-TARGET="_top"
->Privoxy - Why?</A
->
-   </P
-></LI
-></UL
-></P
-><P
-> Credit: The site which gave us the general idea for these bookmarklets is
- <A
-HREF="http://www.bookmarklets.com/";
-TARGET="_top"
->www.bookmarklets.com</A
->. They
- have more information about bookmarklets. </P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CHAIN"
->14.3. Chain of Events</A
-></H2
-><P
-> Let's take a quick look at how some of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> 
- core features are triggered, and the ensuing sequence of events when a web
- page is requested by your browser:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->   First, your web browser requests a web page. The browser knows to send 
-   the request to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, which will in turn, 
-   relay the request to the remote web server after passing the following 
-   tests: 
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> traps any request for its own internal CGI 
-   pages (e.g <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->) and sends the CGI page back to the browser.
-  </P
-></LI
-><LI
-><P
->   Next, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> checks to see if the URL 
-   matches any <A
-HREF="actions-file.html#BLOCK"
-><SPAN
-CLASS="QUOTE"
->"+block"</SPAN
-></A
-> patterns. If
-   so, the URL is then blocked, and the remote web server will not be contacted.
-   <A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
-><SPAN
-CLASS="QUOTE"
->"+handle-as-image"</SPAN
-></A
-> 
-   and 
-   <A
-HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT"
-><SPAN
-CLASS="QUOTE"
->"+handle-as-empty-document"</SPAN
-></A
->
-   are then checked, and if there is no match, an 
-   HTML <SPAN
-CLASS="QUOTE"
->"BLOCKED"</SPAN
-> page is sent back to the browser. Otherwise, if
-   it does match, an image is returned for the former, and an empty text
-   document for the latter. The type of image would depend on the setting of
-   <A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
-><SPAN
-CLASS="QUOTE"
->"+set-image-blocker"</SPAN
-></A
->
-   (blank, checkerboard pattern, or an HTTP redirect to an image elsewhere).
-  </P
-></LI
-><LI
-><P
->   Untrusted URLs are blocked. If URLs are being added to the
-   <TT
-CLASS="FILENAME"
->trust</TT
-> file, then that is done.
-  </P
-></LI
-><LI
-><P
->   If the URL pattern matches the <A
-HREF="actions-file.html#FAST-REDIRECTS"
-><SPAN
-CLASS="QUOTE"
->"+fast-redirects"</SPAN
-></A
-> action,
-   it is then processed. Unwanted parts of the requested URL are stripped.
-  </P
-></LI
-><LI
-><P
->   Now the rest of the client browser's request headers are processed. If any
-   of these match any of the relevant actions (e.g. <A
-HREF="actions-file.html#HIDE-USER-AGENT"
-><SPAN
-CLASS="QUOTE"
->"+hide-user-agent"</SPAN
-></A
->,
-   etc.), headers are suppressed or forged as determined by these actions and
-   their parameters.
-  </P
-></LI
-><LI
-><P
->   Now the web server starts sending its response back (i.e. typically a web
-   page).
-  </P
-></LI
-><LI
-><P
->   First, the server headers are read and processed to determine, among other
-   things, the MIME type (document type) and encoding. The headers are then
-   filtered as determined by the 
-   <A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
-><SPAN
-CLASS="QUOTE"
->"+crunch-incoming-cookies"</SPAN
-></A
->,
-   <A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
-><SPAN
-CLASS="QUOTE"
->"+session-cookies-only"</SPAN
-></A
->,
-   and <A
-HREF="actions-file.html#DOWNGRADE-HTTP-VERSION"
-><SPAN
-CLASS="QUOTE"
->"+downgrade-http-version"</SPAN
-></A
->
-   actions.
-  </P
-></LI
-><LI
-><P
->   If any <A
-HREF="actions-file.html#FILTER"
-><SPAN
-CLASS="QUOTE"
->"+filter"</SPAN
-></A
-> action
-   or <A
-HREF="actions-file.html#DEANIMATE-GIFS"
-><SPAN
-CLASS="QUOTE"
->"+deanimate-gifs"</SPAN
-></A
->
-   action applies (and the document type fits the action), the rest of the page is
-   read into memory (up to a configurable limit). Then the filter rules (from
-   <TT
-CLASS="FILENAME"
->default.filter</TT
-> and any other filter files) are
-   processed against the buffered content. Filters are applied in the order
-   they are specified in one of the filter files. Animated GIFs, if present,
-   are reduced to either the first or last frame, depending on the action
-   setting.The entire page, which is now filtered, is then sent by
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> back to your browser. 
-  </P
-><P
->   If neither a <A
-HREF="actions-file.html#FILTER"
-><SPAN
-CLASS="QUOTE"
->"+filter"</SPAN
-></A
-> action
-   or <A
-HREF="actions-file.html#DEANIMATE-GIFS"
-><SPAN
-CLASS="QUOTE"
->"+deanimate-gifs"</SPAN
-></A
->
-   matches, then <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> passes the raw data through 
-   to the client browser as it becomes available.
-  </P
-></LI
-><LI
-><P
->   As the browser receives the now (possibly filtered) page content, it 
-   reads and then requests any URLs that may be embedded within the page
-   source, e.g. ad images, stylesheets, JavaScript, other HTML documents (e.g.
-   frames), sounds, etc. For each of these objects, the browser issues a
-   separate request (this is easily viewable in <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
-   logs). And each such request is in turn processed just as above. Note that a
-   complex web page will have many, many such embedded URLs. If these 
-   secondary requests are to a different server, then quite possibly a very 
-   differing set of actions is triggered.
-  </P
-></LI
-></UL
-></P
-><P
-> NOTE: This is somewhat of a simplistic overview of what happens with each URL
- request. For the sake of brevity and simplicity, we have focused on 
- <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> core features only.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="ACTIONSANAT"
->14.4. Troubleshooting: Anatomy of an Action</A
-></H2
-><P
-> The way <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> applies 
- <A
-HREF="actions-file.html#ACTIONS"
->actions</A
-> and <A
-HREF="actions-file.html#FILTER"
->filters</A
->
- to any given URL can be complex, and not always so
- easy to understand what is happening. And sometimes we need to be able to
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->see</I
-></SPAN
-> just what <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is
- doing. Especially, if something <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is doing
- is causing us a problem inadvertently. It can be a little daunting to look at
- the actions and filters files themselves, since they tend to be filled with
- <A
-HREF="appendix.html#REGEX"
->regular expressions</A
-> whose consequences are not
- always so obvious. </P
-><P
-> One quick test to see if <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is causing a problem 
- or not, is to disable it temporarily. This should be the first troubleshooting 
- step. See <A
-HREF="appendix.html#BOOKMARKLETS"
->the Bookmarklets</A
-> section on a quick 
- and easy way to do this (be sure to flush caches afterward!). Looking at the 
- logs is a good idea too. (Note that both the toggle feature and logging are 
- enabled via <TT
-CLASS="FILENAME"
->config</TT
-> file settings, and may need to be 
- turned <SPAN
-CLASS="QUOTE"
->"on"</SPAN
->.)</P
-><P
-> Another easy troubleshooting step to try is if you have done any
- customization of your installation, revert back to the installed
- defaults and see if that helps. There are times the developers get complaints
- about one thing or another, and the problem is more related to a customized
- configuration issue.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> also provides the 
- <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->http://config.privoxy.org/show-url-info</A
->
- page that can show us very specifically how <SPAN
-CLASS="APPLICATION"
->actions</SPAN
->
- are being applied to any given URL. This is a big help for troubleshooting.</P
-><P
-> First, enter one URL (or partial URL) at the prompt, and then
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will tell us 
- how the current configuration will handle it. This will not
- help with filtering effects (i.e. the <A
-HREF="actions-file.html#FILTER"
-><SPAN
-CLASS="QUOTE"
->"+filter"</SPAN
-></A
-> action) from
- one of the filter files since this is handled very
- differently and not so easy to trap! It also will not tell you about any other
- URLs that may be embedded within the URL you are testing. For instance, images
- such as ads are expressed as URLs within the raw page source of HTML pages. So
- you will only get info for the actual URL that is pasted into the prompt area
- -- not any sub-URLs. If you want to know about embedded URLs like ads, you
- will have to dig those out of the HTML source. Use your browser's <SPAN
-CLASS="QUOTE"
->"View
- Page Source"</SPAN
-> option for this. Or right click on the ad, and grab the
- URL.</P
-><P
-> Let's try an example, <A
-HREF="http://google.com";
-TARGET="_top"
->google.com</A
->, 
- and look at it one section at a time in a sample configuration (your real 
- configuration may vary):</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> Matches for http://www.google.com:
-
- In file: default.action <SPAN
-CLASS="GUIBUTTON"
->[ View ]</SPAN
-> <SPAN
-CLASS="GUIBUTTON"
->[ Edit ]</SPAN
->
-
- {+change-x-forwarded-for{block}
- +deanimate-gifs {last}
- +fast-redirects {check-decoded-url}
- +filter {refresh-tags}
- +filter {img-reorder}
- +filter {banners-by-size}
- +filter {webbugs}
- +filter {jumping-windows}
- +filter {ie-exploits}
- +hide-from-header {block}
- +hide-referrer {forge}
- +session-cookies-only
- +set-image-blocker {pattern}
-/
- 
- { -session-cookies-only }
- .google.com
-
- { -fast-redirects }
- .google.com
-
-In file: user.action <SPAN
-CLASS="GUIBUTTON"
->[ View ]</SPAN
-> <SPAN
-CLASS="GUIBUTTON"
->[ Edit ]</SPAN
->
-(no matches in this file)  </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> This is telling us how we have defined our 
- <A
-HREF="actions-file.html#ACTIONS"
-><SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-></A
->, and
- which ones match for our test case, <SPAN
-CLASS="QUOTE"
->"google.com"</SPAN
->. 
- Displayed is all the actions that are available to us. Remember,
- the <TT
-CLASS="LITERAL"
->+</TT
-> sign denotes <SPAN
-CLASS="QUOTE"
->"on"</SPAN
->. <TT
-CLASS="LITERAL"
->-</TT
->
- denotes <SPAN
-CLASS="QUOTE"
->"off"</SPAN
->. So some are <SPAN
-CLASS="QUOTE"
->"on"</SPAN
-> here, but many 
- are <SPAN
-CLASS="QUOTE"
->"off"</SPAN
->. Each example we try may provide a slightly different
- end result, depending on our configuration directives.</P
-><P
-> The first listing
-  is for our <TT
-CLASS="FILENAME"
->default.action</TT
-> file. The large, multi-line
-  listing, is how the actions are set to match for all URLs, i.e. our default
-  settings. If you look at your <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> file, this would be the
-  section just below the <SPAN
-CLASS="QUOTE"
->"aliases"</SPAN
-> section near the top. This
-  will apply to all URLs as signified by the single forward slash at the end
-  of the listing -- <SPAN
-CLASS="QUOTE"
->" / "</SPAN
->.</P
-><P
-> But we have defined additional actions that would be exceptions to these general
- rules, and then we list specific URLs (or patterns) that these exceptions
- would apply to. Last match wins. Just below this then are two explicit
- matches for <SPAN
-CLASS="QUOTE"
->".google.com"</SPAN
->. The first is negating our previous
- cookie setting, which was for <A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
-><SPAN
-CLASS="QUOTE"
->"+session-cookies-only"</SPAN
-></A
->
- (i.e. not persistent). So we will allow persistent cookies for google, at
- least that is how it is in this example. The second turns
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->off</I
-></SPAN
-> any <A
-HREF="actions-file.html#FAST-REDIRECTS"
-><SPAN
-CLASS="QUOTE"
->"+fast-redirects"</SPAN
-></A
->
- action, allowing this to take place unmolested. Note that there is a leading
- dot here -- <SPAN
-CLASS="QUOTE"
->".google.com"</SPAN
->. This will match any hosts and
- sub-domains, in the google.com domain also, such as
- <SPAN
-CLASS="QUOTE"
->"www.google.com"</SPAN
-> or <SPAN
-CLASS="QUOTE"
->"mail.google.com"</SPAN
->. But it would not 
- match <SPAN
-CLASS="QUOTE"
->"www.google.de"</SPAN
->! So, apparently, we have these two actions
- defined as exceptions to the general rules at the top somewhere in the lower
- part of our <TT
-CLASS="FILENAME"
->default.action</TT
-> file, and
- <SPAN
-CLASS="QUOTE"
->"google.com"</SPAN
-> is referenced somewhere in these latter sections.</P
-><P
-> Then, for our <TT
-CLASS="FILENAME"
->user.action</TT
-> file, we again have no hits.
- So there is nothing google-specific that we might have added to our own, local
- configuration. If there was, those actions would over-rule any actions from 
- previously processed files, such as <TT
-CLASS="FILENAME"
->default.action</TT
->.
- <TT
-CLASS="FILENAME"
->user.action</TT
-> typically has the last word. This is the
- best place to put hard and fast exceptions,</P
-><P
-> And finally we pull it all together in the bottom section and summarize how
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is applying all its <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> 
- to <SPAN
-CLASS="QUOTE"
->"google.com"</SPAN
->:&#13;</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; Final results:
- 
- -add-header
- -block
- +change-x-forwarded-for{block} 
- -client-header-filter{hide-tor-exit-notation}
- -content-type-overwrite
- -crunch-client-header
- -crunch-if-none-match
- -crunch-incoming-cookies
- -crunch-outgoing-cookies
- -crunch-server-header
- +deanimate-gifs {last}
- -downgrade-http-version
- -fast-redirects
- -filter {js-events}
- -filter {content-cookies}
- -filter {all-popups}
- -filter {banners-by-link}
- -filter {tiny-textforms}
- -filter {frameset-borders}
- -filter {demoronizer}
- -filter {shockwave-flash}
- -filter {quicktime-kioskmode}
- -filter {fun}
- -filter {crude-parental}
- -filter {site-specifics}
- -filter {js-annoyances}
- -filter {html-annoyances}
- +filter {refresh-tags}
- -filter {unsolicited-popups}
- +filter {img-reorder}
- +filter {banners-by-size}
- +filter {webbugs}
- +filter {jumping-windows}
- +filter {ie-exploits}
- -filter {google}
- -filter {yahoo}
- -filter {msn}
- -filter {blogspot}
- -filter {no-ping}
- -force-text-mode
- -handle-as-empty-document
- -handle-as-image
- -hide-accept-language
- -hide-content-disposition
- +hide-from-header {block}
- -hide-if-modified-since
- +hide-referrer {forge}
- -hide-user-agent
- -limit-connect
- -overwrite-last-modified
- -prevent-compression
- -redirect
- -server-header-filter{xml-to-html}
- -server-header-filter{html-to-xml} 
- -session-cookies-only
- +set-image-blocker {pattern} </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Notice the only difference here to the previous listing, is to 
- <SPAN
-CLASS="QUOTE"
->"fast-redirects"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"session-cookies-only"</SPAN
->,
- which are activated specifically for this site in our configuration, 
- and thus show in the <SPAN
-CLASS="QUOTE"
->"Final Results"</SPAN
->.</P
-><P
-> Now another example, <SPAN
-CLASS="QUOTE"
->"ad.doubleclick.net"</SPAN
->:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; { +block{Domains starts with "ad"} }
-  ad*.
-
- { +block{Domain contains "ad"} }
-  .ad.
-
- { +block{Doubleclick banner server} +handle-as-image }
-  .[a-vx-z]*.doubleclick.net</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> We'll just show the interesting part here - the explicit matches. It is 
- matched three different times. Two <SPAN
-CLASS="QUOTE"
->"+block{}"</SPAN
-> sections, 
- and a <SPAN
-CLASS="QUOTE"
->"+block{} +handle-as-image"</SPAN
->,
- which is the expanded form of one of our aliases that had been defined as: 
- <SPAN
-CLASS="QUOTE"
->"+block-as-image"</SPAN
->. (<A
-HREF="actions-file.html#ALIASES"
-><SPAN
-CLASS="QUOTE"
->"Aliases"</SPAN
-></A
-> are defined in
- the first section of the actions file and typically used to combine more 
- than one action.)</P
-><P
-> Any one of these would have done the trick and blocked this as an unwanted 
- image. This is unnecessarily redundant since the last case effectively 
- would also cover the first. No point in taking chances with these guys 
- though ;-) Note that if you want an ad or obnoxious 
- URL to be invisible, it should be defined as <SPAN
-CLASS="QUOTE"
->"ad.doubleclick.net"</SPAN
->
- is done here -- as both a <A
-HREF="actions-file.html#BLOCK"
-><SPAN
-CLASS="QUOTE"
->"+block{}"</SPAN
-></A
->
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
-> an 
- <A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
-><SPAN
-CLASS="QUOTE"
->"+handle-as-image"</SPAN
-></A
->.
- The custom alias <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->+block-as-image</TT
->"</SPAN
-> just
- simplifies the process and make it more readable.</P
-><P
-> One last example. Let's try <SPAN
-CLASS="QUOTE"
->"http://www.example.net/adsl/HOWTO/";</SPAN
->.
- This one is giving us problems. We are getting a blank page. Hmmm ...</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; Matches for http://www.example.net/adsl/HOWTO/:
-
- In file: default.action <SPAN
-CLASS="GUIBUTTON"
->[ View ]</SPAN
-> <SPAN
-CLASS="GUIBUTTON"
->[ Edit ]</SPAN
->
-
- {-add-header 
-  -block
-  +change-x-forwarded-for{block} 
-  -client-header-filter{hide-tor-exit-notation}
-  -content-type-overwrite
-  -crunch-client-header
-  -crunch-if-none-match
-  -crunch-incoming-cookies
-  -crunch-outgoing-cookies
-  -crunch-server-header
-  +deanimate-gifs 
-  -downgrade-http-version 
-  +fast-redirects {check-decoded-url}
-  -filter {js-events}
-  -filter {content-cookies}
-  -filter {all-popups}
-  -filter {banners-by-link}
-  -filter {tiny-textforms}
-  -filter {frameset-borders}
-  -filter {demoronizer}
-  -filter {shockwave-flash}
-  -filter {quicktime-kioskmode}
-  -filter {fun}
-  -filter {crude-parental}
-  -filter {site-specifics}
-  -filter {js-annoyances}
-  -filter {html-annoyances}
-  +filter {refresh-tags}
-  -filter {unsolicited-popups}
-  +filter {img-reorder}
-  +filter {banners-by-size}
-  +filter {webbugs}
-  +filter {jumping-windows}
-  +filter {ie-exploits}
-  -filter {google}
-  -filter {yahoo}
-  -filter {msn}
-  -filter {blogspot}
-  -filter {no-ping}
-  -force-text-mode
-  -handle-as-empty-document
-  -handle-as-image 
-  -hide-accept-language
-  -hide-content-disposition  
-  +hide-from-header{block} 
-  +hide-referer{forge} 
-  -hide-user-agent 
-  -overwrite-last-modified
-  +prevent-compression 
-  -redirect
-  -server-header-filter{xml-to-html}
-  -server-header-filter{html-to-xml} 
-  +session-cookies-only 
-  +set-image-blocker{blank} }
-   /
-
- { +block{Path contains "ads".} +handle-as-image }
-  /ads</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Ooops, the <SPAN
-CLASS="QUOTE"
->"/adsl/"</SPAN
-> is matching <SPAN
-CLASS="QUOTE"
->"/ads"</SPAN
-> in our 
- configuration! But we did not want this at all! Now we see why we get the
- blank page. It is actually triggering two different actions here, and 
- the effects are aggregated so that the URL is blocked, and <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is told 
- to treat the block as if it were an image. But this is, of course, all wrong.
-  We could now add a new action below this (or better in our own
-  <TT
-CLASS="FILENAME"
->user.action</TT
-> file) that explicitly
-  <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->un</I
-></SPAN
-> blocks (
-  <A
-HREF="actions-file.html#BLOCK"
-><SPAN
-CLASS="QUOTE"
->"{-block}"</SPAN
-></A
->) paths with
-  <SPAN
-CLASS="QUOTE"
->"adsl"</SPAN
-> in them (remember, last match in the configuration
-  wins). There are various ways to handle such exceptions. Example:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; { -block }
-  /adsl</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Now the page displays ;-) 
- Remember to flush your browser's caches when making these kinds of changes to
- your configuration to insure that you get a freshly delivered page! Or, try
- using <TT
-CLASS="LITERAL"
->Shift+Reload</TT
->.</P
-><P
-> But now what about a situation where we get no explicit matches like 
- we did with:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; { +block{Path starts with "ads".} +handle-as-image }
- /ads</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> That actually was very helpful and pointed us quickly to where the problem
- was. If you don't get this kind of match, then it means one of the default 
- rules in the first section of <TT
-CLASS="FILENAME"
->default.action</TT
-> is causing
- the problem. This would require some guesswork, and maybe a little trial and
- error to isolate the offending rule. One likely cause would be one of the
- <A
-HREF="actions-file.html#FILTER"
-><SPAN
-CLASS="QUOTE"
->"+filter"</SPAN
-></A
-> actions.
- These tend to be harder to troubleshoot.
- Try adding the URL for the site to one of aliases that turn off
- <A
-HREF="actions-file.html#FILTER"
-><SPAN
-CLASS="QUOTE"
->"+filter"</SPAN
-></A
->:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; { shop }
- .quietpc.com
- .worldpay.com   # for quietpc.com
- .jungle.com
- .scan.co.uk
- .forbes.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->{ shop }</TT
->"</SPAN
-> is an <SPAN
-CLASS="QUOTE"
->"alias"</SPAN
-> that expands to 
- <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->{ -filter -session-cookies-only }</TT
->"</SPAN
->.
- Or you could do your own exception to negate filtering:&#13;</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; { -filter }
- # Disable ALL filter actions for sites in this section
- .forbes.com
- developer.ibm.com
- localhost</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> This would turn off all filtering for these sites. This is best
- put in <TT
-CLASS="FILENAME"
->user.action</TT
->, for local site
- exceptions. Note that when a simple domain pattern is used by itself (without
- the subsequent path portion), all sub-pages within that domain are included 
- automatically in the scope of the action.</P
-><P
-> Images that are inexplicably being blocked, may well be hitting the 
-<A
-HREF="actions-file.html#FILTER-BANNERS-BY-SIZE"
-><SPAN
-CLASS="QUOTE"
->"+filter{banners-by-size}"</SPAN
-></A
->
- rule, which assumes 
- that images of certain sizes are ad banners (works well 
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->most of the time</I
-></SPAN
->  since these tend to be standardized).</P
-><P
-> <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->{ fragile }</TT
->"</SPAN
-> is an alias that disables most
- actions that are the most likely to cause trouble. This can be used as a
- last resort for problem sites. </P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#13; { fragile }
- # Handle with care: easy to break
- mail.google.
- mybank.example.com</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Remember to flush caches!</I
-></SPAN
-> Note that the 
- <TT
-CLASS="LITERAL"
->mail.google</TT
-> reference lacks the TLD portion (e.g. 
- <SPAN
-CLASS="QUOTE"
->".com"</SPAN
->). This will effectively match any TLD with 
- <TT
-CLASS="LITERAL"
->google</TT
-> in it, such as <TT
-CLASS="LITERAL"
->mail.google.de.</TT
->, 
- just as an example.</P
-><P
-> 
- If this still does not work, you will have to go through the remaining
- actions one by one to find which one(s) is causing the problem.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="seealso.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->&nbsp;</TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->See Also</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->&nbsp;</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/config.html b/external/privoxy/doc/webserver/user-manual/config.html
deleted file mode 100644
index 05e19b3..0000000
--- a/external/privoxy/doc/webserver/user-manual/config.html
+++ /dev/null
@@ -1,4121 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->The Main Configuration File</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy Configuration"
-HREF="configuration.html"><LINK
-REL="NEXT"
-TITLE="Actions Files"
-HREF="actions-file.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="configuration.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="actions-file.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CONFIG"
->7. The Main Configuration File</A
-></H1
-><P
-> Again, the main configuration file is named <TT
-CLASS="FILENAME"
->config</TT
-> on
- Linux/Unix/BSD and OS/2, and <TT
-CLASS="FILENAME"
->config.txt</TT
-> on Windows.
- Configuration lines consist of an initial keyword followed by a list of
- values, all separated by whitespace (any number of spaces or tabs). For
- example:</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->confdir /etc/privoxy</I
-></SPAN
-></P
->
- </TT
-> </P
-><P
-> Assigns the value <TT
-CLASS="LITERAL"
->/etc/privoxy</TT
-> to the option
- <TT
-CLASS="LITERAL"
->confdir</TT
-> and thus indicates that the configuration
- directory is named <SPAN
-CLASS="QUOTE"
->"/etc/privoxy/"</SPAN
->.</P
-><P
-> All options in the config file except for <TT
-CLASS="LITERAL"
->confdir</TT
-> and
- <TT
-CLASS="LITERAL"
->logdir</TT
-> are optional. Watch out in the below description
- for what happens if you leave them unset.</P
-><P
-> The main config file controls all aspects of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s
- operation that are not location dependent (i.e. they apply universally, no matter
- where you may be surfing).</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="LOCAL-SET-UP"
->7.1. Local Set-up Documentation</A
-></H2
-><P
->    If you intend to operate <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> for more users
-    than just yourself, it might be a good idea to let them know how to reach
-    you, what you block and why you do that, your policies, etc.
-   </P
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="USER-MANUAL"
->7.1.1. user-manual</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Location of the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> User Manual.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->A fully qualified URI</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    <A
-HREF="http://www.privoxy.org/user-manual/";
-TARGET="_top"
->http://www.privoxy.org/<TT
-CLASS="REPLACEABLE"
-><I
->version</I
-></TT
->/user-manual/</A
->
-    will be used, where <TT
-CLASS="REPLACEABLE"
-><I
->version</I
-></TT
-> is the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The User Manual URI is the single best source of information on 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and is used for help links from some
-    of the internal CGI pages. The manual itself is normally packaged with the
-    binary distributions, so you probably want to set this to a locally
-    installed copy. 
-   </P
-><P
->    Examples:
-   </P
-><P
->   The best all purpose solution is simply to put the full local
-   <TT
-CLASS="LITERAL"
->PATH</TT
-> to where the <I
-CLASS="CITETITLE"
->User Manual</I
-> is
-   located:
-  </P
-><P
->   <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  user-manual  /usr/share/doc/privoxy/user-manual</PRE
-></TD
-></TR
-></TABLE
->
-  </P
-><P
->   The User Manual is then available to anyone with access to
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, by following the built-in URL:
-   <TT
-CLASS="LITERAL"
->http://config.privoxy.org/user-manual/</TT
->
-   (or the shortcut: <TT
-CLASS="LITERAL"
->http://p.p/user-manual/</TT
->).
-  </P
-><P
->   If the documentation is not on the local system, it can be accessed 
-   from a remote server, as:
-  </P
-><P
->   <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  user-manual  http://example.com/privoxy/user-manual/</PRE
-></TD
-></TR
-></TABLE
->
-  </P
-><DIV
-CLASS="WARNING"
-><P
-></P
-><TABLE
-CLASS="WARNING"
-BORDER="1"
-WIDTH="90%"
-><TR
-><TD
-ALIGN="CENTER"
-><B
->Warning</B
-></TD
-></TR
-><TR
-><TD
-ALIGN="LEFT"
-><P
->     If set, this option should be <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->the first option in the config
-     file</I
-></SPAN
->, because it is used while the config file is being read
-     on start-up.
-   </P
-></TD
-></TR
-></TABLE
-></DIV
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="TRUST-INFO-URL"
->7.1.2. trust-info-url</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    A URL to be displayed in the error page that users will see if access to an untrusted page is denied.    
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->URL</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    No links are displayed on the "untrusted" error page.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The value of this option only matters if the experimental trust mechanism has been
-    activated. (See <A
-HREF="config.html#TRUSTFILE"
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->trustfile</I
-></SPAN
-></A
-> below.)
-   </P
-><P
->    If you use the trust mechanism, it is a good idea to write up some on-line
-    documentation about your trust policy and to specify the URL(s) here.
-    Use multiple times for multiple URLs.
-   </P
-><P
->    The URL(s) should be added to the trustfile as well, so users don't end up
-    locked out from the information on why they were locked out in the first place!
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ADMIN-ADDRESS"
->7.1.3. admin-address</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    An email address to reach the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> administrator.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Email address</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    No email address is displayed on error pages and the CGI user interface.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    If both <TT
-CLASS="LITERAL"
->admin-address</TT
-> and <TT
-CLASS="LITERAL"
->proxy-info-url</TT
->
-    are unset, the whole "Local Privoxy Support" box on all generated pages will
-    not be shown.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="PROXY-INFO-URL"
->7.1.4. proxy-info-url</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    A URL to documentation about the local <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> setup,
-    configuration or policies.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->URL</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    No link to local documentation is displayed on error pages and the CGI user interface.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    If both <TT
-CLASS="LITERAL"
->admin-address</TT
-> and <TT
-CLASS="LITERAL"
->proxy-info-url</TT
->
-    are unset, the whole "Local Privoxy Support" box on all generated pages will
-    not be shown.
-   </P
-><P
->    This URL shouldn't be blocked ;-)
-   </P
-></DD
-></DL
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONF-LOG-LOC"
->7.2. Configuration and Log File Locations</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can (and normally does) use a number of
- other files for additional configuration, help and logging.
- This section of the configuration file tells <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- where to find those other files. </P
-><P
-> The user running <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, must have read
- permission for all configuration files, and write permission to any files
- that would be modified, such as log files and actions files.</P
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="CONFDIR"
->7.2.1. confdir</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->The directory where the other configuration files are located.</P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Path name</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->/etc/privoxy (Unix) <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->or</I
-></SPAN
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> installation dir (Windows) </P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Mandatory</I
-></SPAN
-></P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    No trailing <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->/</TT
->"</SPAN
->, please.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="TEMPLDIR"
->7.2.2. templdir</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->An alternative directory where the templates are loaded from.</P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Path name</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->unset</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->The templates are assumed to be located in confdir/template.</P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> original templates are usually
-    overwritten with each update. Use this option to relocate customized
-    templates that should be kept. As template variables might change
-    between updates, you shouldn't expect templates to work with
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> releases other than the one
-    they were part of, though.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="LOGDIR"
->7.2.3. logdir</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The directory where all logging takes place
-    (i.e. where the <TT
-CLASS="FILENAME"
->logfile</TT
-> is located).
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Path name</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->/var/log/privoxy (Unix) <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->or</I
-></SPAN
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> installation dir (Windows) </P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Mandatory</I
-></SPAN
-></P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    No trailing <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->/</TT
->"</SPAN
->, please.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ACTIONSFILE"
->7.2.4. actionsfile</A
-></H4
-><A
-NAME="DEFAULT.ACTION"
-></A
-><A
-NAME="STANDARD.ACTION"
-></A
-><A
-NAME="USER.ACTION"
-></A
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The <A
-HREF="actions-file.html"
->actions file(s)</A
-> to use
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Complete file name, relative to <TT
-CLASS="LITERAL"
->confdir</TT
-></P
-></DD
-><DT
->Default values:</DT
-><DD
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->     <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;match-all.action&nbsp;#&nbsp;Actions&nbsp;that&nbsp;are&nbsp;applied&nbsp;to&nbsp;all&nbsp;sites&nbsp;and&nbsp;maybe&nbsp;overruled&nbsp;later&nbsp;on.</P
->
-    </TD
-></TR
-><TR
-><TD
->     <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;default.action&nbsp;&nbsp;&nbsp;#&nbsp;Main&nbsp;actions&nbsp;file</P
->
-    </TD
-></TR
-><TR
-><TD
->     <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;user.action&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;#&nbsp;User&nbsp;customizations</P
->
-    </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    No actions are taken at all. More or less neutral proxying. 
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Multiple <TT
-CLASS="LITERAL"
->actionsfile</TT
-> lines are permitted, and are in fact recommended!
-   </P
-><P
-> 
-    The default values are <TT
-CLASS="FILENAME"
->default.action</TT
->, which is the
-    <SPAN
-CLASS="QUOTE"
->"main"</SPAN
-> actions file maintained by the developers, and
-    <TT
-CLASS="FILENAME"
->user.action</TT
->, where you can make your personal additions.
-   </P
-><P
-> 
-    Actions files contain all the per site and per URL configuration for 
-    ad blocking, cookie management, privacy considerations, etc.
-    There is no point in using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> without at 
-    least one actions file.
-   </P
-><P
->    Note that since Privoxy 3.0.7, the complete filename, including the <SPAN
-CLASS="QUOTE"
->".action"</SPAN
->
-    extension has to be specified.  The syntax change was necessary to be consistent
-    with the other file options and to allow previously forbidden characters.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FILTERFILE"
->7.2.5. filterfile</A
-></H4
-><A
-NAME="DEFAULT.FILTER"
-></A
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The <A
-HREF="filter-file.html"
->filter file(s)</A
-> to use
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->File name, relative to <TT
-CLASS="LITERAL"
->confdir</TT
-></P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->default.filter (Unix) <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->or</I
-></SPAN
-> default.filter.txt (Windows)</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    No textual content filtering takes place, i.e. all
-    <TT
-CLASS="LITERAL"
->+<A
-HREF="actions-file.html#FILTER"
->filter</A
->{<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->}</TT
->
-    actions in the actions files are turned neutral.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Multiple <TT
-CLASS="LITERAL"
->filterfile</TT
-> lines are permitted.
-   </P
-><P
->    The <A
-HREF="filter-file.html"
->filter files</A
-> contain content modification
-    rules that use <A
-HREF="appendix.html#REGEX"
->regular expressions</A
->. These rules permit
-    powerful changes on the content of Web pages, and optionally the headers
-    as well, e.g., you could try to disable your favorite JavaScript annoyances,
-    re-write the actual displayed text, or just have some fun 
-    playing buzzword bingo with web pages.
-   </P
-><P
->    The
-    <TT
-CLASS="LITERAL"
->+<A
-HREF="actions-file.html#FILTER"
->filter</A
->{<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->}</TT
->
-    actions rely on the relevant filter (<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->)
-    to be defined in a filter file!
-   </P
-><P
->    A pre-defined filter file called <TT
-CLASS="FILENAME"
->default.filter</TT
-> that contains
-    a number of useful filters for common problems is included in the distribution.
-    See the section on the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
-></TT
->
-    action for a list.
-   </P
-><P
->    It is recommended to place any locally adapted filters into a separate
-    file, such as <TT
-CLASS="FILENAME"
->user.filter</TT
->.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="LOGFILE"
->7.2.6. logfile</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The log file to use
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->File name, relative to <TT
-CLASS="LITERAL"
->logdir</TT
-></P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset (commented out)</I
-></SPAN
->. When activated: logfile (Unix) <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->or</I
-></SPAN
-> privoxy.log (Windows).</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    No logfile is written.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The logfile is where all logging and error messages are written. The level
-    of detail and number of messages are set with the <TT
-CLASS="LITERAL"
->debug</TT
->
-    option (see below). The logfile can be useful for tracking down a problem with
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> (e.g., it's not blocking an ad you
-    think it should block) and it can help you to monitor what your browser
-    is doing.
-   </P
-><P
->    Depending on the debug options below, the logfile may be a privacy risk
-    if third parties can get access to it. As most users will never look
-    at it, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7 and later only log fatal
-    errors by default.
-   </P
-><P
->    For most troubleshooting purposes, you will have to change that,
-    please refer to the debugging section for details.
-   </P
-><P
->    Your logfile will grow indefinitely, and you will probably want to
-    periodically remove it.  On Unix systems, you can do this with a cron job
-    (see <SPAN
-CLASS="QUOTE"
->"man cron"</SPAN
->). For Red Hat based Linux distributions, a
-    <B
-CLASS="COMMAND"
->logrotate</B
-> script has been included.
-   </P
-><P
->    Any log files must be writable by whatever user <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    is being run as (on Unix, default user id is <SPAN
-CLASS="QUOTE"
->"privoxy"</SPAN
->).
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="TRUSTFILE"
->7.2.7. trustfile</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The name of the trust file to use
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->File name, relative to <TT
-CLASS="LITERAL"
->confdir</TT
-></P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset (commented out)</I
-></SPAN
->. When activated: trust (Unix) <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->or</I
-></SPAN
-> trust.txt (Windows)</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    The entire trust mechanism is disabled.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The trust mechanism is an experimental feature for building white-lists and should
-    be used with care. It is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->NOT</I
-></SPAN
-> recommended for the casual user.
-   </P
-><P
->    If you specify a trust file, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will only allow
-    access to sites that are specified in the trustfile. Sites can be listed 
-    in one of two ways:
-   </P
-><P
->    Prepending a <TT
-CLASS="LITERAL"
->~</TT
-> character limits access to this site 
-    only (and any sub-paths within this site), e.g. 
-    <TT
-CLASS="LITERAL"
->~www.example.com</TT
-> allows access to
-    <TT
-CLASS="LITERAL"
->~www.example.com/features/news.html</TT
->, etc. 
-   </P
-><P
->    Or, you can designate sites as <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->trusted referrers</I
-></SPAN
->, by
-    prepending the name with a <TT
-CLASS="LITERAL"
->+</TT
-> character. The effect is that
-    access to untrusted sites will be granted -- but only if a link from this
-    trusted referrer was used to get there. The link target will then be added
-    to the <SPAN
-CLASS="QUOTE"
->"trustfile"</SPAN
-> so that future, direct accesses will be
-    granted. Sites added via this mechanism do not become trusted referrers
-    themselves (i.e. they are added with a <TT
-CLASS="LITERAL"
->~</TT
-> designation).
-    There is a limit of 512 such entries, after which new entries will not be
-    made.
-   </P
-><P
->    If you use the <TT
-CLASS="LITERAL"
->+</TT
-> operator in the trust file, it may grow 
-    considerably over time.
-   </P
-><P
->    It is recommended that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> be compiled with
-    the <TT
-CLASS="LITERAL"
->--disable-force</TT
->, <TT
-CLASS="LITERAL"
->--disable-toggle</TT
-> and
-    <TT
-CLASS="LITERAL"
-> --disable-editor</TT
-> options, if this feature is to be
-    used.
-   </P
-><P
->    Possible applications include limiting Internet access for children.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="DEBUGGING"
->7.3. Debugging</A
-></H2
-><P
->  These options are mainly useful when tracing a problem.
-  Note that you might also want to invoke
-  <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with the <TT
-CLASS="LITERAL"
->--no-daemon</TT
->
-  command line option when debugging.
- </P
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="DEBUG"
->7.3.1. debug</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Key values that determine what information gets logged.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Integer values</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Default value is used (see above).
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    The available debug levels are:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  debug     1 # Log the destination for each request <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> let through. See also debug 1024.
-  debug     2 # show each connection status
-  debug     4 # show I/O status
-  debug     8 # show header parsing
-  debug    16 # log all data written to the network into the logfile
-  debug    32 # debug force feature
-  debug    64 # debug regular expression filters
-  debug   128 # debug redirects
-  debug   256 # debug GIF de-animation
-  debug   512 # Common Log Format
-  debug  1024 # Log the destination for requests <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> didn't let through, and the reason why.
-  debug  2048 # CGI user interface
-  debug  4096 # Startup banner and warnings.
-  debug  8192 # Non-fatal errors</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    To select multiple debug levels, you can either add them or use
-    multiple <TT
-CLASS="LITERAL"
->debug</TT
-> lines.
-   </P
-><P
->    A debug level of 1 is informative because it will show you each request
-    as it happens. <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->1, 4096 and 8192 are recommended</I
-></SPAN
->
-    so that you will notice when things go wrong. The other levels are
-    probably only of interest if you are hunting down a specific problem.
-    They can produce a hell of an output (especially 16).
-    
-   </P
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> used to ship with the debug levels recommended above enabled by
-    default, but due to privacy concerns 3.0.7 and later are configured to
-    only log fatal errors.
-   </P
-><P
->    If you are used to the more verbose settings, simply enable the debug lines
-    below again.
-   </P
-><P
->    If you want to use pure CLF (Common Log Format), you should set <SPAN
-CLASS="QUOTE"
->"debug
-    512"</SPAN
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->ONLY</I
-></SPAN
-> and not enable anything else.
-   </P
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has a hard-coded limit for the
-    length of log messages. If it's reached, messages are logged truncated
-    and marked with <SPAN
-CLASS="QUOTE"
->"... [too long, truncated]"</SPAN
->.
-   </P
-><P
->    Please don't file any support requests without trying to reproduce
-    the problem with increased debug level first. Once you read the log
-    messages, you may even be able to solve the problem on your own.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SINGLE-THREADED"
->7.3.2. single-threaded</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether to run only one server thread.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->None</I
-></SPAN
-></P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to
-    serve multiple requests simultaneously.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This option is only there for debugging purposes.
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->It will drastically reduce performance.</I
-></SPAN
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="HOSTNAME"
->7.3.3. hostname</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The hostname shown on the CGI pages.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Text</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    The hostname provided by the operating system is used.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    On some misconfigured systems resolving the hostname fails or
-    takes too much time and slows Privoxy down. Setting a fixed hostname
-    works around the problem.
-   </P
-><P
->    In other circumstances it might be desirable to show a hostname
-    other than the one returned by the operating system. For example
-    if the system has several different hostnames and you don't want
-    to use the first one.
-   </P
-><P
->    Note that Privoxy does not validate the specified hostname value.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="ACCESS-CONTROL"
->7.4. Access Control and Security</A
-></H2
-><P
->  This section of the config file controls the security-relevant aspects
-  of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s configuration.
- </P
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="LISTEN-ADDRESS"
->7.4.1. listen-address</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    The IP address and TCP port on which <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will
-    listen for client requests.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->[<TT
-CLASS="REPLACEABLE"
-><I
->IP-Address</I
-></TT
->]:<TT
-CLASS="REPLACEABLE"
-><I
->Port</I
-></TT
-></P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->127.0.0.1:8118</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Bind to 127.0.0.1 (localhost), port 8118. This is suitable and recommended for
-    home users who run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on the same machine as
-    their browser.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    You will need to configure your browser(s) to this proxy address and port.
-   </P
-><P
->    If you already have another service running on port 8118, or if you want to
-    serve requests from other machines (e.g. on your local network) as well, you
-    will need to override the default.
-   </P
-><P
->    If you leave out the IP address, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will
-    bind to all interfaces (addresses) on your machine and may become reachable
-    from the Internet. In that case, consider using <A
-HREF="config.html#ACLS"
->access control lists</A
-> (ACL's, see below), and/or
-    a firewall.
-   </P
-><P
->    If you open <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to untrusted users, you will
-    also want to make sure that the following actions are disabled:  <TT
-CLASS="LITERAL"
-><A
-HREF="config.html#ENABLE-EDIT-ACTIONS"
->enable-edit-actions</A
-></TT
-> and
-    <TT
-CLASS="LITERAL"
-><A
-HREF="config.html#ENABLE-REMOTE-TOGGLE"
->enable-remote-toggle</A
-></TT
->
-   </P
-></DD
-><DT
->Example:</DT
-><DD
-><P
->     Suppose you are running <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on
-     a machine which has the address 192.168.0.1 on your local private network
-     (192.168.0.0) and has another outside connection with a different address.
-     You want it to serve requests from inside only:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->  listen-address  192.168.0.1:8118</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="TOGGLE"
->7.4.2. toggle</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Initial state of "toggle" status
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->1 or 0</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->1</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Act as if toggled on
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    If set to 0, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will start in
-    <SPAN
-CLASS="QUOTE"
->"toggled off"</SPAN
-> mode, i.e. mostly behave like a normal,
-    content-neutral proxy with both ad blocking and content filtering
-    disabled. See <TT
-CLASS="LITERAL"
->enable-remote-toggle</TT
-> below.
-   </P
-><P
->    The windows version will only display the toggle icon in the system tray
-    if this option is present.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ENABLE-REMOTE-TOGGLE"
->7.4.3. enable-remote-toggle</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether or not the <A
-HREF="http://config.privoxy.org/toggle";
-TARGET="_top"
->web-based toggle
-    feature</A
-> may be used
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->0 or 1</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->0</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    The web-based toggle feature is disabled.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    When toggled off, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> mostly acts like a normal,
-    content-neutral proxy, i.e. doesn't block ads or filter content.
-   </P
-><P
->    Access to the toggle feature can <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> be
-    controlled separately by <SPAN
-CLASS="QUOTE"
->"ACLs"</SPAN
-> or HTTP authentication,
-    so that everybody who can access <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> (see
-    <SPAN
-CLASS="QUOTE"
->"ACLs"</SPAN
-> and <TT
-CLASS="LITERAL"
->listen-address</TT
-> above) can
-    toggle it for all users. So this option is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not recommended</I
-></SPAN
->
-    for multi-user environments with untrusted users.
-   </P
-><P
->    Note that malicious client side code (e.g Java) is also
-    capable of using this option.
-   </P
-><P
->    As a lot of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> users don't read
-    documentation, this feature is disabled by default.
-   </P
-><P
->    Note that you must have compiled <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with
-    support for this feature, otherwise this option has no effect. 
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ENABLE-REMOTE-HTTP-TOGGLE"
->7.4.4. enable-remote-http-toggle</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether or not Privoxy recognizes special HTTP headers to change its behaviour.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->0 or 1</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->0</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Privoxy ignores special HTTP headers.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    When toggled on, the client can change <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
-    behaviour by setting special HTTP headers. Currently the only supported
-    special header is <SPAN
-CLASS="QUOTE"
->"X-Filter: No"</SPAN
->, to disable filtering for
-    the ongoing request, even if it is enabled in one of the action files.
-   </P
-><P
->    This feature is disabled by default. If you are using
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in a environment with trusted clients,
-    you may enable this feature at your discretion. Note that malicious client
-    side code (e.g Java) is also capable of using this feature.
-   </P
-><P
->    This option will be removed in future releases as it has been obsoleted
-    by the more general header taggers.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ENABLE-EDIT-ACTIONS"
->7.4.5. enable-edit-actions</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether or not the <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->web-based actions
-    file editor</A
-> may be used
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->0 or 1</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->0</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    The web-based actions file editor is disabled.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Access to the editor can <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> be
-    controlled separately by <SPAN
-CLASS="QUOTE"
->"ACLs"</SPAN
-> or HTTP authentication,
-    so that everybody who can access <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> (see
-    <SPAN
-CLASS="QUOTE"
->"ACLs"</SPAN
-> and <TT
-CLASS="LITERAL"
->listen-address</TT
-> above) can
-    modify its configuration for all users.
-   </P
-><P
->    This option is <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not recommended</I
-></SPAN
-> for environments
-    with untrusted users and as a lot of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    users don't read documentation, this feature is disabled by default.
-   </P
-><P
->    Note that malicious client side code (e.g Java) is also
-    capable of using the actions editor and you shouldn't enable
-    this options unless you understand the consequences and are
-    sure your browser is configured correctly.
-   </P
-><P
->    Note that you must have compiled <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with
-    support for this feature, otherwise this option has no effect. 
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ENFORCE-BLOCKS"
->7.4.6. enforce-blocks</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether the user is allowed to ignore blocks and can <SPAN
-CLASS="QUOTE"
->"go there anyway"</SPAN
->.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->0 or 1</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->0</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Blocks are not enforced.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is mainly used to block and filter
-    requests as a service to the user, for example to block ads and other
-    junk that clogs the pipes. <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> configuration
-    isn't perfect and sometimes innocent pages are blocked. In this situation it
-    makes sense to allow the user to enforce the request and have
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> ignore the block.
-   </P
-><P
->    In the default configuration <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
-    <SPAN
-CLASS="QUOTE"
->"Blocked"</SPAN
-> page contains a <SPAN
-CLASS="QUOTE"
->"go there anyway"</SPAN
->
-    link to adds a special string (the force prefix) to the request URL.
-    If that link is used, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will
-    detect the force prefix, remove it again and let the request pass.
-   </P
-><P
->    Of course <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can also be used to enforce
-    a network policy. In that case the user obviously should not be able to
-    bypass any blocks, and that's what the <SPAN
-CLASS="QUOTE"
->"enforce-blocks"</SPAN
->
-    option is for. If it's enabled, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> hides
-    the <SPAN
-CLASS="QUOTE"
->"go there anyway"</SPAN
-> link. If the user adds the force
-    prefix by hand, it will not be accepted and the circumvention attempt
-    is logged.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    enforce-blocks 1
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ACLS"
->7.4.7. ACLs: permit-access and deny-access</A
-></H4
-><A
-NAME="PERMIT-ACCESS"
-></A
-><A
-NAME="DENY-ACCESS"
-></A
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Who can access what.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->src_addr</I
-></TT
->[/<TT
-CLASS="REPLACEABLE"
-><I
->src_masklen</I
-></TT
->]
-    [<TT
-CLASS="REPLACEABLE"
-><I
->dst_addr</I
-></TT
->[/<TT
-CLASS="REPLACEABLE"
-><I
->dst_masklen</I
-></TT
->]]
-   </P
-><P
->    Where <TT
-CLASS="REPLACEABLE"
-><I
->src_addr</I
-></TT
-> and 
-   <TT
-CLASS="REPLACEABLE"
-><I
->dst_addr</I
-></TT
-> are IP addresses in dotted decimal notation or valid
-    DNS names, and <TT
-CLASS="REPLACEABLE"
-><I
->src_masklen</I
-></TT
-> and
-    <TT
-CLASS="REPLACEABLE"
-><I
->dst_masklen</I
-></TT
-> are subnet masks in CIDR notation, i.e. integer
-    values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole
-    destination part are optional.
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Don't restrict access further than implied by <TT
-CLASS="LITERAL"
->listen-address</TT
->
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Access controls are included at the request of ISPs and systems
-    administrators, and <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->are not usually needed by individual users</I
-></SPAN
->.
-    For a typical home user, it will normally suffice to ensure that 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> only listens on the localhost
-    (127.0.0.1) or internal (home) network address by means of the
-    <A
-HREF="config.html#LISTEN-ADDRESS"
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->listen-address</I
-></SPAN
-></A
->
-    option. 
-   </P
-><P
->    Please see the warnings in the FAQ that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    is not intended to be a substitute for a firewall or to encourage anyone
-    to defer addressing basic security weaknesses.
-   </P
-><P
->    Multiple ACL lines are OK.
-    If any ACLs are specified, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> only talks
-    to IP addresses that match at least one <TT
-CLASS="LITERAL"
->permit-access</TT
-> line
-    and don't match any subsequent <TT
-CLASS="LITERAL"
->deny-access</TT
-> line. In other words, the
-    last match wins, with the default being <TT
-CLASS="LITERAL"
->deny-access</TT
->.
-   </P
-><P
->    If <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is using a forwarder (see <TT
-CLASS="LITERAL"
->forward</TT
-> below)
-    for a particular destination URL, the <TT
-CLASS="REPLACEABLE"
-><I
->dst_addr</I
-></TT
->
-    that is examined is the address of the forwarder and <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->NOT</I
-></SPAN
-> the address
-    of the ultimate target. This is necessary because it may be impossible for the local
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to determine the IP address of the
-    ultimate target (that's often what gateways are used for).
-   </P
-><P
->    You should prefer using IP addresses over DNS names, because the address lookups take
-    time. All DNS names must resolve! You can <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> use domain patterns
-    like <SPAN
-CLASS="QUOTE"
->"*.org"</SPAN
-> or partial domain names. If a DNS name resolves to multiple
-    IP addresses, only the first one is used.
-   </P
-><P
->    Denying access to particular sites by ACL may have undesired side effects
-    if the site in question is hosted on a machine which also hosts other sites
-    (most sites are).
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    Explicitly define the default behavior if no ACL and
-    <TT
-CLASS="LITERAL"
->listen-address</TT
-> are set: <SPAN
-CLASS="QUOTE"
->"localhost"</SPAN
->
-    is OK. The absence of a <TT
-CLASS="REPLACEABLE"
-><I
->dst_addr</I
-></TT
-> implies that
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> destination addresses are OK:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  permit-access  localhost</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    Allow any host on the same class C subnet as www.privoxy.org access to
-    nothing but www.example.com (or other domains hosted on the same system):
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  permit-access  www.privoxy.org/24 www.example.com/32</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere,
-    with the exception that 192.168.45.73 may not access the IP address behind
-    www.dirty-stuff.example.com:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  permit-access  192.168.45.64/26
-  deny-access    192.168.45.73    www.dirty-stuff.example.com</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="BUFFER-LIMIT"
->7.4.8. buffer-limit</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Maximum size of the buffer for content filtering.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->Size in Kbytes</P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->4096</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Use a 4MB (4096 KB) limit.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    For content filtering, i.e. the <TT
-CLASS="LITERAL"
->+filter</TT
-> and
-    <TT
-CLASS="LITERAL"
->+deanimate-gif</TT
-> actions, it is necessary that 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> buffers the entire document body.
-    This can be potentially dangerous, since a server could just keep sending
-    data indefinitely and wait for your RAM to exhaust -- with nasty consequences.
-    Hence this option.
-   </P
-><P
->    When a document buffer size reaches the <TT
-CLASS="LITERAL"
->buffer-limit</TT
->, it is
-    flushed to the client unfiltered and no further attempt to
-    filter the rest of the document is made. Remember that there may be multiple threads
-    running, which might require up to <TT
-CLASS="LITERAL"
->buffer-limit</TT
-> Kbytes
-    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->each</I
-></SPAN
->, unless you have enabled <SPAN
-CLASS="QUOTE"
->"single-threaded"</SPAN
->
-    above.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="FORWARDING"
->7.5. Forwarding</A
-></H2
-><P
-> This feature allows routing of HTTP requests through a chain of
- multiple proxies.</P
-><P
-> Forwarding can be used to chain Privoxy with a caching proxy to speed
- up browsing. Using a parent proxy may also be necessary if the machine
- that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> runs on has no direct Internet access.</P
-><P
-> Note that parent proxies can severely decrease your privacy level.
- For example a parent proxy could add your IP address to the request
- headers and if it's a caching proxy it may add the <SPAN
-CLASS="QUOTE"
->"Etag"</SPAN
->
- header to revalidation requests again, even though you configured Privoxy
- to remove it. It may also ignore Privoxy's header time randomization and use the
- original values which could be used by the server as cookie replacement
- to track your steps between visits.</P
-><P
-> Also specified here are SOCKS proxies. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- supports the SOCKS 4 and SOCKS 4A protocols.</P
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FORWARD"
->7.5.1. forward</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    To which parent HTTP proxy specific requests should be routed.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->target_pattern</I
-></TT
->
-    <TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
->[:<TT
-CLASS="REPLACEABLE"
-><I
->port</I
-></TT
->]
-   </P
-><P
->    where <TT
-CLASS="REPLACEABLE"
-><I
->target_pattern</I
-></TT
-> is a <A
-HREF="actions-file.html#AF-PATTERNS"
->URL pattern</A
-> 
-    that specifies to which requests (i.e. URLs) this forward rule shall apply. Use <TT
-CLASS="LITERAL"
->/</TT
-> to
-    denote <SPAN
-CLASS="QUOTE"
->"all URLs"</SPAN
->.
-    <TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
->[:<TT
-CLASS="REPLACEABLE"
-><I
->port</I
-></TT
->]
-    is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded,
-    optionally followed by its listening port (default: 8080).
-    Use a single dot (<TT
-CLASS="LITERAL"
->.</TT
->) to denote <SPAN
-CLASS="QUOTE"
->"no forwarding"</SPAN
->.
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Don't use parent HTTP proxies.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    If <TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
-> is <SPAN
-CLASS="QUOTE"
->"."</SPAN
->, then requests are not
-    forwarded to another HTTP proxy but are made directly to the web servers.
-   </P
-><P
->    Multiple lines are OK, they are checked in sequence, and the last match wins.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    Everything goes to an example parent proxy, except SSL on port 443 (which it doesn't handle):
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward   /      parent-proxy.example.org:8080
-  forward   :443   .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    Everything goes to our example ISP's caching proxy, except for requests
-    to that ISP's sites:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward   /                  caching-proxy.isp.example.net:8000
-  forward   .isp.example.net   .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SOCKS"
->7.5.2. forward-socks4, forward-socks4a and forward-socks5</A
-></H4
-><A
-NAME="FORWARD-SOCKS4"
-></A
-><A
-NAME="FORWARD-SOCKS4A"
-></A
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Through which SOCKS proxy (and optionally to which parent HTTP proxy) specific requests should be routed.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->target_pattern</I
-></TT
->
-    <TT
-CLASS="REPLACEABLE"
-><I
->socks_proxy</I
-></TT
->[:<TT
-CLASS="REPLACEABLE"
-><I
->port</I
-></TT
->]
-    <TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
->[:<TT
-CLASS="REPLACEABLE"
-><I
->port</I
-></TT
->]
-   </P
-><P
->    where <TT
-CLASS="REPLACEABLE"
-><I
->target_pattern</I
-></TT
-> is a
-    <A
-HREF="actions-file.html#AF-PATTERNS"
->URL pattern</A
-> that specifies to which
-    requests (i.e. URLs) this forward rule shall apply. Use <TT
-CLASS="LITERAL"
->/</TT
-> to
-    denote <SPAN
-CLASS="QUOTE"
->"all URLs"</SPAN
->. <TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
->
-    and <TT
-CLASS="REPLACEABLE"
-><I
->socks_proxy</I
-></TT
->
-    are IP addresses in dotted decimal notation or valid DNS names
-    (<TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
->
-    may be <SPAN
-CLASS="QUOTE"
->"."</SPAN
-> to denote <SPAN
-CLASS="QUOTE"
->"no HTTP forwarding"</SPAN
->), and the optional 
-    <TT
-CLASS="REPLACEABLE"
-><I
->port</I
-></TT
-> parameters are TCP ports,
-    i.e. integer values from 1 to 65535
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Unset</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Don't use SOCKS proxies.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Multiple lines are OK, they are checked in sequence, and the last match wins.
-   </P
-><P
->    The difference between <TT
-CLASS="LITERAL"
->forward-socks4</TT
-> and <TT
-CLASS="LITERAL"
->forward-socks4a</TT
->
-    is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS
-    server, while in SOCKS 4 it happens locally.
-   </P
-><P
->    With <TT
-CLASS="LITERAL"
->forward-socks5</TT
-> the DNS resolution will happen on the remote server as well.
-   </P
-><P
->    If <TT
-CLASS="REPLACEABLE"
-><I
->http_parent</I
-></TT
-> is <SPAN
-CLASS="QUOTE"
->"."</SPAN
->, then requests are not
-    forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through
-    a SOCKS proxy.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->     From the company example.com, direct connections are made to all
-     <SPAN
-CLASS="QUOTE"
->"internal"</SPAN
-> domains, but everything outbound goes through
-     their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to
-     the Internet.
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward-socks4a   /              socks-gw.example.com:1080  www-cache.isp.example.net:8080
-  forward           .example.com   .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward-socks4   /               socks-gw.example.com:1080  .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    To chain Privoxy and Tor, both running on the same system, you would use 
-    something like:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward-socks4a   /               127.0.0.1:9050 .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    The public <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> network can't be used to
-    reach your local network, if you need to access local servers you
-    therefore might want to make some exceptions:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward         192.168.*.*/     .
-  forward            10.*.*.*/     .
-  forward           127.*.*.*/     .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-><P
->    Unencrypted connections to systems in these address ranges will
-    be as (un)secure as the local network is, but the alternative is that you
-    can't reach the local network through <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    at all. Of course this may actually be desired and there is no reason
-    to make these exceptions if you aren't sure you need them.
-   </P
-><P
->    If you also want to be able to reach servers in your local network by
-    using their names, you will need additional exceptions that look like
-    this:
-   </P
-><P
->    <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> forward           localhost/     .</PRE
-></TD
-></TR
-></TABLE
->
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ADVANCED-FORWARDING-EXAMPLES"
->7.5.3. Advanced Forwarding Examples</A
-></H4
-><P
-> If you have links to multiple ISPs that provide various special content 
- only to their subscribers, you can configure multiple <SPAN
-CLASS="APPLICATION"
->Privoxies</SPAN
->
- which have connections to the respective ISPs to act as forwarders to each other, so that
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->your</I
-></SPAN
-> users can see the internal content of all ISPs.</P
-><P
-> Assume that host-a has a PPP connection to isp-a.example.net. And host-b has a PPP connection to
- isp-b.example.org. Both run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. Their forwarding
- configuration can look like this:</P
-><P
-> host-a:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward    /           .
-  forward    .isp-b.example.net  host-b:8118</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> host-b:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward    /           .
-  forward    .isp-a.example.org  host-a:8118</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Now, your users can set their browser's proxy to use either
- host-a or host-b and be able to browse the internal content
- of both isp-a and isp-b.</P
-><P
-> If you intend to chain <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and 
- <SPAN
-CLASS="APPLICATION"
->squid</SPAN
-> locally, then chaining as 
- <TT
-CLASS="LITERAL"
->browser -&#62; squid -&#62; privoxy</TT
-> is the recommended way. </P
-><P
-> Assuming that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and <SPAN
-CLASS="APPLICATION"
->squid</SPAN
->
- run on the same box, your <SPAN
-CLASS="APPLICATION"
->squid</SPAN
-> configuration could then look like this:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  # Define Privoxy as parent proxy (without ICP) 
-  cache_peer 127.0.0.1 parent 8118 7 no-query 
-
-  # Define ACL for protocol FTP 
-  acl ftp proto FTP 
-
-  # Do not forward FTP requests to Privoxy
-  always_direct allow ftp 
-
-  # Forward all the rest to Privoxy
-  never_direct allow all</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> You would then need to change your browser's proxy settings to <SPAN
-CLASS="APPLICATION"
->squid</SPAN
->'s address and port.
- Squid normally uses port 3128. If unsure consult <TT
-CLASS="LITERAL"
->http_port</TT
-> in <TT
-CLASS="FILENAME"
->squid.conf</TT
->.</P
-><P
-> You could just as well decide to only forward requests you suspect
- of leading to Windows executables through a virus-scanning parent proxy,
- say, on <TT
-CLASS="LITERAL"
->antivir.example.com</TT
->, port 8010:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  forward   /                          .
-  forward   /.*\.(exe|com|dll|zip)$    antivir.example.com:8010</PRE
-></TD
-></TR
-></TABLE
-> </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="FORWARDED-CONNECT-RETRIES"
->7.5.4. forwarded-connect-retries</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    How often Privoxy retries if a forwarded connection request fails. 
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->Number of retries.</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->0</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Connections forwarded through other proxies are treated like direct connections and no retry attempts are made.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->forwarded-connect-retries</I
-></TT
-> is mainly interesting
-    for socks4a connections, where <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can't detect why the connections failed.
-    The connection might have failed because of a DNS timeout in which case a retry makes sense,
-    but it might also have failed because the server doesn't exist or isn't reachable. In this
-    case the retry will just delay the appearance of Privoxy's error message.
-   </P
-><P
->    Note that in the context of this option, <SPAN
-CLASS="QUOTE"
->"forwarded connections"</SPAN
-> includes all connections
-    that Privoxy forwards through other proxies. This option is not limited to the HTTP CONNECT method.
-   </P
-><P
->    Only use this option, if you are getting lots of forwarding-related error messages
-    that go away when you try again manually. Start with a small value and check Privoxy's
-    logfile from time to time, to see how many retries are usually needed.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    forwarded-connect-retries 1
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ACCEPT-INTERCEPTED-REQUESTS"
->7.5.5. accept-intercepted-requests</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether intercepted requests should be treated as valid.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->0 or 1</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->0</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Only proxy requests are accepted, intercepted requests are treated as invalid.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    If you don't trust your clients and want to force them
-    to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, enable this
-    option and configure your packet filter to redirect outgoing
-    HTTP connections into <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. 
-   </P
-><P
->    Make sure that <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> own requests
-    aren't redirected as well. Additionally take care that
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can't intentionally connect
-    to itself, otherwise you could run into redirection loops if
-    <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> listening port is reachable
-    by the outside or an attacker has access to the pages you visit.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    accept-intercepted-requests 1
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="ALLOW-CGI-REQUEST-CRUNCHING"
->7.5.6. allow-cgi-request-crunching</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether requests to <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> CGI pages can be blocked or redirected.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->0 or 1</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->0</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> ignores block and redirect actions for its CGI pages.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    By default <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> ignores block or redirect actions
-    for its CGI pages. Intercepting these requests can be useful in multi-user
-    setups to implement fine-grained access control, but it can also render the complete
-    web interface useless and make debugging problems painful if done without care.
-   </P
-><P
->    Don't enable this option unless you're sure that you really need it.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    allow-cgi-request-crunching 1
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SPLIT-LARGE-FORMS"
->7.5.7. split-large-forms</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Whether the CGI interface should stay compatible with broken HTTP clients.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->0 or 1</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->0</I
-></SPAN
-></P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    The CGI form generate long GET URLs.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> CGI forms can lead to
-    rather long URLs. This isn't a problem as far as the HTTP
-    standard is concerned, but it can confuse clients with arbitrary
-    URL length limitations.
-   </P
-><P
->    Enabling split-large-forms causes <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    to divide big forms into smaller ones to keep the URL length down.
-    It makes editing a lot less convenient and you can no longer
-    submit all changes at once, but at least it works around this
-    browser bug.
-   </P
-><P
->    If you don't notice any editing problems, there is no reason
-    to enable this option, but if one of the submit buttons appears
-    to be broken, you should give it a try.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    split-large-forms 1
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="KEEP-ALIVE-TIMEOUT"
->7.5.8. keep-alive-timeout</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Number of seconds after which an open connection will no longer be reused.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->Time in seconds.</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->None</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    Connections are not reused.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    This option has no effect if <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    has been compiled without keep-alive support.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    Note that reusing connections doesn't necessary cause speedups.
-    There are also a few privacy implications you should be aware of.
-   </P
-><P
->    Outgoing connections are shared between clients (if there are more
-    than one) and closing the client that initiated the outgoing connection
-    does not affect the connection between <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and the server unless
-    the client's request hasn't been completed yet. If the outgoing connection
-    is idle, it will not be closed until either <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
-    or the server's timeout is reached. While it's open, the server knows
-    that the system running <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is still there.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    keep-alive-timeout 300
-   </P
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="SECT3"
-><H4
-CLASS="SECT3"
-><A
-NAME="SOCKET-TIMEOUT"
->7.5.9. socket-timeout</A
-></H4
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Specifies:</DT
-><DD
-><P
->    Number of seconds after which a socket times out if
-    no data is received.
-   </P
-></DD
-><DT
->Type of value:</DT
-><DD
-><P
->    <TT
-CLASS="REPLACEABLE"
-><I
->Time in seconds.</I
-></TT
->
-   </P
-></DD
-><DT
->Default value:</DT
-><DD
-><P
->None</P
-></DD
-><DT
->Effect if unset:</DT
-><DD
-><P
->    A default value of 300 seconds is used.
-   </P
-></DD
-><DT
->Notes:</DT
-><DD
-><P
->    For SOCKS requests the timeout currently doesn't start until
-    the SOCKS server accepted the request. This will be fixed in
-    the next release.
-   </P
-></DD
-><DT
->Examples:</DT
-><DD
-><P
->    socket-timeout 300
-   </P
-></DD
-></DL
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="WINDOWS-GUI"
->7.6. Windows GUI Options</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> has a number of options specific to the
- Windows GUI interface:</P
-><A
-NAME="ACTIVITY-ANIMATION"
-></A
-><P
-> If <SPAN
-CLASS="QUOTE"
->"activity-animation"</SPAN
-> is set to 1, the
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> icon will animate when
- <SPAN
-CLASS="QUOTE"
->"Privoxy"</SPAN
-> is active. To turn off, set to 0.</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->activity-animation   1</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="LOG-MESSAGES"
-></A
-><P
-> If <SPAN
-CLASS="QUOTE"
->"log-messages"</SPAN
-> is set to 1,
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will log messages to the console
- window:</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->log-messages       1</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="LOG-BUFFER-SIZE"
-></A
-><P
-> 
- If <SPAN
-CLASS="QUOTE"
->"log-buffer-size"</SPAN
-> is set to 1, the size of the log buffer,
- i.e. the amount of memory used for the log messages displayed in the
- console window, will be limited to <SPAN
-CLASS="QUOTE"
->"log-max-lines"</SPAN
-> (see below).</P
-><P
-> Warning: Setting this to 0 will result in the buffer to grow infinitely and
- eat up all your memory!</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->log-buffer-size      1</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="LOG-MAX-LINES"
-></A
-><P
-> <SPAN
-CLASS="APPLICATION"
->log-max-lines</SPAN
-> is the maximum number of lines held
- in the log buffer. See above.</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->log-max-lines      200</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="LOG-HIGHLIGHT-MESSAGES"
-></A
-><P
-> If <SPAN
-CLASS="QUOTE"
->"log-highlight-messages"</SPAN
-> is set to 1,
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will highlight portions of the log
- messages with a bold-faced font:</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->log-highlight-messages   1</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="LOG-FONT-NAME"
-></A
-><P
-> The font used in the console window:</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->log-font-name        Comic Sans MS</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="LOG-FONT-SIZE"
-></A
-><P
-> Font size used in the console window:</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->log-font-size        8</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="SHOW-ON-TASK-BAR"
-></A
-><P
->  
- <SPAN
-CLASS="QUOTE"
->"show-on-task-bar"</SPAN
-> controls whether or not
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will appear as a button on the Task bar
- when minimized:</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->show-on-task-bar     0</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="CLOSE-BUTTON-MINIMIZES"
-></A
-><P
-> If <SPAN
-CLASS="QUOTE"
->"close-button-minimizes"</SPAN
-> is set to 1, the Windows close
- button will minimize <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> instead of closing
- the program (close with the exit option on the File menu).</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->close-button-minimizes  1</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-><A
-NAME="HIDE-CONSOLE"
-></A
-><P
-> The <SPAN
-CLASS="QUOTE"
->"hide-console"</SPAN
-> option is specific to the MS-Win console
- version of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. If this option is used,
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will disconnect from and hide the
- command console.</P
-><P
-> <TT
-CLASS="LITERAL"
->  <P
-CLASS="LITERALLAYOUT"
->&nbsp;&nbsp;#<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->hide-console</I
-></SPAN
-><br>
-&nbsp;&nbsp;&nbsp;</P
-> 
- </TT
-></P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="configuration.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="actions-file.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy Configuration</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Actions Files</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/configuration.html b/external/privoxy/doc/webserver/user-manual/configuration.html
deleted file mode 100644
index b4f021e..0000000
--- a/external/privoxy/doc/webserver/user-manual/configuration.html
+++ /dev/null
@@ -1,514 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy Configuration</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Starting Privoxy"
-HREF="startup.html"><LINK
-REL="NEXT"
-TITLE="The Main Configuration File"
-HREF="config.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="startup.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="config.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CONFIGURATION"
->6. Privoxy Configuration</A
-></H1
-><P
->  All <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> configuration is stored  
-  in text files. These files can be edited with a text editor.
-  Many important aspects of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can 
-  also be controlled easily with a web browser.
- </P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN776"
->6.1. Controlling Privoxy with Your Web Browser</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s user interface can be reached through the special 
- URL <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
- (shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->), 
- which is a built-in page and works without Internet access.
- You will see the following section:&#13;</P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> <H2
-CLASS="BRIDGEHEAD"
-><A
-NAME="AEN784"
-></A
->    Privoxy Menu</H2
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->          &#9642;  <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->View &#38; change the current configuration</A
->
- </TD
-></TR
-><TR
-><TD
->          &#9642;  <A
-HREF="http://config.privoxy.org/show-version";
-TARGET="_top"
->View the source code version numbers</A
->
- </TD
-></TR
-><TR
-><TD
->          &#9642;  <A
-HREF="http://config.privoxy.org/show-request";
-TARGET="_top"
->View the request headers.</A
->
- </TD
-></TR
-><TR
-><TD
->          &#9642;  <A
-HREF="http://config.privoxy.org/show-url-info";
-TARGET="_top"
->Look up which actions apply to a URL and why</A
->
- </TD
-></TR
-><TR
-><TD
->          &#9642;  <A
-HREF="http://config.privoxy.org/toggle";
-TARGET="_top"
->Toggle Privoxy on or off</A
->
- </TD
-></TR
-><TR
-><TD
->          &#9642;  <A
-HREF="http://www.privoxy.org/3.0.12/user-manual/";
-TARGET="_top"
->Documentation</A
->
- </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></PRE
-></TD
-></TR
-></TABLE
-><P
-> This should be self-explanatory. Note the first item leads to an editor for the
- <A
-HREF="actions-file.html"
->actions files</A
->, which is where the ad, banner,
- cookie, and URL blocking magic is configured as well as other advanced features of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. This is an easy way to adjust various
- aspects of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> configuration. The actions
- file, and other configuration files, are explained in detail below. </P
-><P
-> <SPAN
-CLASS="QUOTE"
->"Toggle Privoxy On or Off"</SPAN
-> is handy for sites that might 
- have problems with your current actions and filters. You can in fact use
- it as a test to see whether it is <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
- causing the problem or not. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> continues 
- to run as a proxy in this case, but all manipulation is disabled, i.e.
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> acts like a normal forwarding proxy. There
- is even a toggle <A
-HREF="appendix.html#BOOKMARKLETS"
->Bookmarklet</A
-> offered, so
- that you can toggle <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with one click from
- your browser.</P
-><P
-> Note that several of the features described above are disabled by default
- in <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7 beta and later.
- Check the
- <A
-HREF="config.html"
-TARGET="_top"
->configuration file</A
-> to learn why
- and in which cases it's safe to enable them again.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONFOVERVIEW"
->6.2. Configuration Files Overview</A
-></H2
-><P
-> For Unix, *BSD and Linux, all configuration files are located in
- <TT
-CLASS="FILENAME"
->/etc/privoxy/</TT
-> by default. For MS Windows, OS/2, and
- AmigaOS these are all in the same directory as the 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> executable. </P
-><P
-> The installed defaults provide a reasonable starting point, though 
- some settings may be aggressive by some standards. For the time being, the
- principle configuration files are:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->     The <A
-HREF="config.html"
->main configuration file</A
-> is named <TT
-CLASS="FILENAME"
->config</TT
->
-     on Linux, Unix, BSD, OS/2, and AmigaOS and <TT
-CLASS="FILENAME"
->config.txt</TT
->
-     on Windows. This is a required file.
-   </P
-></LI
-><LI
-><P
->    <TT
-CLASS="FILENAME"
->match-all.action</TT
-> is used to define which <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
->
-    relating to banner-blocking, images, pop-ups, content modification, cookie handling
-    etc should be applied by default. It should be the first actions file loaded.
-   </P
-><P
->    <TT
-CLASS="FILENAME"
->default.action</TT
-> defines many exceptions (both positive and negative)
-    from the default set of actions that's configured in <TT
-CLASS="FILENAME"
->match-all.action</TT
->.
-    It should be the second actions file loaded and shouldn't be edited by the user.
-   </P
-><P
->    Multiple actions files may be defined in <TT
-CLASS="FILENAME"
->config</TT
->. These 
-    are processed in the order they are defined. Local customizations and locally 
-    preferred exceptions to the default policies as defined in
-    <TT
-CLASS="FILENAME"
->match-all.action</TT
-> (which you will most probably want
-    to define sooner or later) are best applied in <TT
-CLASS="FILENAME"
->user.action</TT
->,
-    where you can preserve them across upgrades. The file isn't installed by all
-    installers, but you can easily create it yourself with a text editor.
-   </P
-><P
->    
-    There is also a web based editor that can be accessed from
-    <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->
-    (Shortcut: <A
-HREF="http://p.p/show-status";
-TARGET="_top"
->http://p.p/show-status</A
->) for the
-    various actions files. 
-   </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="QUOTE"
->"Filter files"</SPAN
-> (the <A
-HREF="filter-file.html"
->filter
-    file</A
->) can be used to re-write the raw page content, including
-    viewable text as well as embedded HTML and JavaScript, and whatever else
-    lurks on any given web page. The filtering jobs are only pre-defined here;
-    whether to apply them or not is up to the actions files. 
-    <TT
-CLASS="FILENAME"
->default.filter</TT
-> includes various filters made 
-    available for use by the developers. Some are much more intrusive than 
-    others, and all should be used with caution. You may define additional 
-    filter files in <TT
-CLASS="FILENAME"
->config</TT
-> as you can with 
-    actions files. We suggest <TT
-CLASS="FILENAME"
->user.filter</TT
-> for any 
-    locally defined filters or customizations.
-   </P
-></LI
-></UL
-></P
-><P
-> The syntax of the configuration and filter files may change between different
- Privoxy versions, unfortunately some enhancements cost backwards compatibility.
- </P
-><P
-> All files use the <SPAN
-CLASS="QUOTE"
->"<TT
-CLASS="LITERAL"
->#</TT
->"</SPAN
-> character to denote a
- comment (the rest of the line will be ignored) and understand line continuation
- through placing a backslash ("<TT
-CLASS="LITERAL"
->\</TT
->") as the very last character
- in a line. If the <TT
-CLASS="LITERAL"
->#</TT
-> is preceded by a backslash, it looses
- its special function. Placing a <TT
-CLASS="LITERAL"
->#</TT
-> in front of an otherwise
- valid configuration line to prevent it from being interpreted is called "commenting
- out" that line. Blank lines are ignored.</P
-><P
-> The actions files and filter files  
- can use Perl style <A
-HREF="appendix.html#REGEX"
->regular expressions</A
-> for
- maximum flexibility. </P
-><P
-> After making any changes, there is no need to restart
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in order for the changes to take
- effect. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> detects such changes 
- automatically. Note, however, that it may take one or two additional
- requests for the change to take effect. When changing the listening address
- of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, these <SPAN
-CLASS="QUOTE"
->"wake up"</SPAN
-> requests
- must obviously be sent to the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->old</I
-></SPAN
-> listening address.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="startup.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="config.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Starting Privoxy</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->The Main Configuration File</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/contact.html b/external/privoxy/doc/webserver/user-manual/contact.html
deleted file mode 100644
index 3fd43eb..0000000
--- a/external/privoxy/doc/webserver/user-manual/contact.html
+++ /dev/null
@@ -1,514 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Contacting the Developers, Bug Reporting and Feature
-Requests</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy's Template Files"
-HREF="templates.html"><LINK
-REL="NEXT"
-TITLE="Privoxy Copyright, License and History"
-HREF="copyright.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="templates.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="CONTACT"
->11. Contacting the Developers, Bug Reporting and Feature
-Requests</A
-></H1
-><P
-> We value your feedback. In fact, we rely on it to improve
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and its configuration.
- However, please note the following hints, so we can 
- provide you with the best support:</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-SUPPORT"
->11.1. Get Support</A
-></H2
-><P
-> For casual users, our 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";
-TARGET="_top"
->support forum at SourceForge</A
->
- is probably best suited:
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118";
-TARGET="_top"
->http://sourceforge.net/tracker/?group_id=11118&#38;atid=211118</A
-></P
-><P
-> All users are of course welcome to discuss their issues on the <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-users";
-TARGET="_top"
->users
- mailing list</A
->, where the developers also hang around.</P
-><P
-> Please don't sent private support requests to individual Privoxy
- developers, either use the mailing lists or the support trackers.</P
-><P
-> Note that the Privoxy mailing lists are moderated. Posts from unsubscribed
- addresses have to be accepted manually by a moderator. This may cause a
- delay of several days and if you use a subject that doesn't clearly
- mention Privoxy or one of its features, your message may be accidentally
- discarded as spam.</P
-><P
-> If you aren't subscribed, you should therefore spend a few seconds
- to come up with a proper subject. Additionally you should make it clear
- that you want to get CC'd. Otherwise some responses will be directed to
- the mailing list only, and you won't see them.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="REPORTING"
->11.2. Reporting Problems</A
-></H2
-><P
-><SPAN
-CLASS="QUOTE"
->"Problems"</SPAN
-> for our purposes, come in two forms:</P
-><P
-></P
-><UL
-><LI
-><P
->    Configuration issues, such as ads that slip through, or sites that 
-    don't function properly due to one <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 
-    <SPAN
-CLASS="QUOTE"
->"action"</SPAN
-> or another being turned <SPAN
-CLASS="QUOTE"
->"on"</SPAN
->.
-   </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="QUOTE"
->"Bugs"</SPAN
-> in the programming code that makes up 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, such as that might cause a crash.
-   </P
-></LI
-></UL
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="CONTACT-ADS"
->11.2.1. Reporting Ads or Other Configuration Problems</A
-></H3
-><P
-> Please send feedback on ads that slipped through, innocent images that were
- blocked, sites that don't work properly, and other configuration related problem of 
- <TT
-CLASS="FILENAME"
->default.action</TT
-> file, to 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=460288";
-TARGET="_top"
-> http://sourceforge.net/tracker/?group_id=11118&#38;atid=460288</A
->,
- the Actions File Tracker.</P
-><P
-> New, improved <TT
-CLASS="FILENAME"
->default.action</TT
-> files may occasionally be made
- available based on your feedback. These will be announced on the <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce";
-TARGET="_top"
->ijbswa-announce</A
->
- list and available from our the <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->files section</A
-> of
- our <A
-HREF="http://sf.net/projects/ijbswa/";
-TARGET="_top"
->project page</A
->.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="CONTACT-BUGS"
->11.2.2. Reporting Bugs</A
-></H3
-><P
-> Please report all bugs through our bug tracker: 
- <A
-HREF="http://sourceforge.net/tracker/?group_id=11118&#38;atid=111118";
-TARGET="_top"
->http://sourceforge.net/tracker/?group_id=11118&#38;atid=111118</A
->. </P
-><P
->  Before doing so, please make sure that the bug has <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not already been submitted</I
-></SPAN
->
-  and observe the additional hints at the top of the <A
-HREF="http://sourceforge.net/tracker/?func=add&#38;group_id=11118&#38;atid=111118";
-TARGET="_top"
->submit
-  form</A
->. If already submitted, please feel free to add any info to the 
-  original report that might help to solve the issue.</P
-><P
->  Please try to verify that it is a <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> bug,
-  and not a browser or site bug or documented behaviour that just happens
-  to be different than what you expected. If unsure,
-  try <A
-HREF="http://config.privoxy.org/toggle?set=disable";
-TARGET="_top"
->toggling
-  off</A
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, and see if the problem persists.</P
-><P
->  If you are using your own custom configuration, please try
-  the stock configs to see if the problem is configuration related.
-  If you're having problems with a feature that is disabled by default,
-  please ask around on the mailing list if others can reproduce the problem.</P
-><P
->  If you aren't using the latest Privoxy version, the bug may have been found
-  and fixed in the meantime. We would appreciate if you could take the time
-  to <A
-HREF="http://www.privoxy.org/user-manual/installation.html";
-TARGET="_top"
->upgrade
-  to the latest version</A
-> (or  even the latest CVS snapshot) and verify
-  that your bug still exists.</P
-><P
->Please be sure to provide the following information:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    The exact <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version you are using
-    (if you got the source from CVS, please also provide the source code revisions
-     as shown in <A
-HREF="http://config.privoxy.org/show-version";
-TARGET="_top"
->http://config.privoxy.org/show-version</A
->).
-   </P
-></LI
-><LI
-><P
->    The operating system and versions you run
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on, (e.g. <SPAN
-CLASS="APPLICATION"
->Windows
-    XP SP2</SPAN
->), if you are using a Unix flavor,
-    sending the output of <SPAN
-CLASS="QUOTE"
->"uname -a"</SPAN
-> should do,
-    in case of GNU/Linux, please also name the distribution.
-   </P
-></LI
-><LI
-><P
->    The name, platform, and version of the <SPAN
-CLASS="APPLICATION"
->browser</SPAN
-> 
-    you were using (e.g. <SPAN
-CLASS="APPLICATION"
->Internet Explorer v5.5</SPAN
-> for Mac).
-   </P
-></LI
-><LI
-><P
->    The URL where the problem occurred, or some way for us to duplicate the
-    problem (e.g. <TT
-CLASS="LITERAL"
->http://somesite.example.com/?somethingelse=123</TT
->). 
-   </P
-></LI
-><LI
-><P
->    Whether your version of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is one supplied
-    by the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developers via SourceForge,
-    or if you got your copy somewhere else.
-   </P
-></LI
-><LI
-><P
->    Whether you are using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in tandem with 
-    another proxy such as <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
->. If so, please
-    temporary disable the other proxy to see if the symptoms change.
-   </P
-></LI
-><LI
-><P
->    Whether you are using a personal firewall product. If so, does 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> work without it?
-   </P
-></LI
-><LI
-><P
->    Any other pertinent information to help identify the problem such as config
-    or log file excerpts (yes, you should have log file entries for each
-    action taken).
-   </P
-></LI
-></UL
-></P
-><P
-> You don't have to tell us your actual name when filing a problem
- report, but please use a nickname so we can differentiate between
- your messages and the ones entered by other "anonymous" users that
- may respond to your request if they have the same problem or already
- found a solution.</P
-><P
-> Please also check the status of your request a few days after submitting
- it, as we may request additional information. If you use a SF id,
- you should automatically get a mail when someone responds to your request.</P
-><P
->  The <A
-HREF="http://www.privoxy.org/user-manual/appendix.html#ACTIONSANAT";
-TARGET="_top"
->appendix
-  of the Privoxy User Manual</A
-> also has helpful information 
-  on understanding <TT
-CLASS="LITERAL"
->actions</TT
->, and <TT
-CLASS="LITERAL"
->action</TT
-> debugging. </P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-FEATURE"
->11.3. Request New Features</A
-></H2
-><P
-> You are welcome to submit ideas on new features or other proposals
- for improvement through our feature request tracker at
- <A
-HREF="http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118";
-TARGET="_top"
->http://sourceforge.net/tracker/?atid=361118&#38;group_id=11118</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CONTACT-OTHER"
->11.4. Other</A
-></H2
-><P
->For any other issues, feel free to use the mailing lists. Technically interested users
-and people who wish to contribute to the project are also welcome on the developers list!
-You can find an overview of all <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->-related mailing lists,
-including list archives, at:
-<A
-HREF="http://sourceforge.net/mail/?group_id=11118";
-TARGET="_top"
->http://sourceforge.net/mail/?group_id=11118</A
->.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="templates.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy's Template Files</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Privoxy Copyright, License and History</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/copyright.html b/external/privoxy/doc/webserver/user-manual/copyright.html
deleted file mode 100644
index b2e1e96..0000000
--- a/external/privoxy/doc/webserver/user-manual/copyright.html
+++ /dev/null
@@ -1,424 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy Copyright, License and History</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Contacting the Developers, Bug Reporting and Feature
-Requests"
-HREF="contact.html"><LINK
-REL="NEXT"
-TITLE="See Also"
-HREF="seealso.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="contact.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="seealso.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="COPYRIGHT"
->12. Privoxy Copyright, License and History</A
-></H1
-><P
-> Copyright © 2001-2009 by Privoxy Developers <CODE
-CLASS="EMAIL"
->&#60;<A
-HREF="mailto:ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx";
->ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</A
->&#62;</CODE
-></P
-><P
-> Some source code is based on code Copyright © 1997 by Anonymous Coders
- and Junkbusters, Inc. and licensed under the <I
-CLASS="CITETITLE"
->GNU General Public
- License</I
->.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN4921"
->12.1. License</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is free software; you can
- redistribute it and/or modify it under the terms of the 
- <I
-CLASS="CITETITLE"
->GNU General Public License</I
->, version 2,
- as published by the Free Software Foundation.</P
-><P
-> This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE.  See the <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
-> <I
-CLASS="CITETITLE"
->GNU General Public License</I
-></A
-> for details.</P
-><P
-> You should have received a copy of the <I
-CLASS="CITETITLE"
->GNU GPL</I
->
- along with this program; if not, write to the <P
-CLASS="ADDRESS"
->&nbsp;Free&nbsp;Software<br>
-&nbsp;Foundation,&nbsp;Inc.&nbsp;<SPAN
-CLASS="STREET"
->51 Franklin Street, Fifth Floor</SPAN
-><br>
-&nbsp;<SPAN
-CLASS="CITY"
->Boston</SPAN
->,&nbsp;<SPAN
-CLASS="STATE"
->MA</SPAN
->&nbsp;<SPAN
-CLASS="POSTCODE"
->02110-1301</SPAN
-><br>
-&nbsp;<SPAN
-CLASS="COUNTRY"
->USA</SPAN
->&nbsp;</P
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="HISTORY"
->12.2. History</A
-></H2
-><P
-> A long time ago, there was the
- <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
-><SPAN
-CLASS="APPLICATION"
->Internet Junkbuster</SPAN
-></A
->, 
- by Anonymous Coders and <A
-HREF="http://www.junkbusters.com/";
-TARGET="_top"
->Junkbusters
- Corporation</A
->. This saved many users a lot of pain in the early days of
- web advertising and user tracking.</P
-><P
-> But the web, its protocols and standards, and with it, the techniques for
- forcing ads on users, give up autonomy over their browsing, and
- for tracking them, keeps evolving. Unfortunately, the <SPAN
-CLASS="APPLICATION"
->Internet
- Junkbuster</SPAN
-> did not. Version 2.0.2, published in 1998, was 
- (and is) the last official
- <A
-HREF="http://www.junkbusters.com/ijbdist.html#release";
-TARGET="_top"
->release</A
->
- available from <A
-HREF="http://www.junkbusters.com";
-TARGET="_top"
->Junkbusters Corporation</A
->.
- Fortunately, it had been released under the GNU
- <A
-HREF="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";
-TARGET="_top"
->GPL</A
->,
- which allowed further development by others.</P
-><P
-> So Stefan Waldherr started maintaining an improved version of the
- software, to which eventually a number of people contributed patches.
- It could already replace banners with a transparent image, and had a first
- version of pop-up killing, but it was still very closely based on the
- original, with all its limitations, such as the lack of HTTP/1.1 support,
- flexible per-site configuration, or content modification. The last release
- from this effort was version 2.0.2-10, published in 2000.</P
-><P
-> Then, some
- <A
-HREF="http://www.privoxy.org/user-manual/copyright.html#AUTHORS";
-TARGET="_top"
->developers</A
->
- picked up the thread, and started turning the software inside out, upside down,
- and then reassembled it, adding many
- <A
-HREF="http://www.privoxy.org/user-manual/introduction.html#FEATURES";
-TARGET="_top"
->new
- features</A
-> along the way.</P
-><P
-> The result of this is <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, whose first
- stable version, 3.0, was released August, 2002. 
- </P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AUTHORS"
->12.3. Authors</A
-></H2
-><P
->Current Privoxy Team:</P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;Fabian&nbsp;Keil,&nbsp;lead&nbsp;developer<br>
-&nbsp;David&nbsp;Schmidt,&nbsp;developer<br>
-<br>
-&nbsp;Hal&nbsp;Burgiss<br>
-&nbsp;Mark&nbsp;Miller<br>
-&nbsp;Gerry&nbsp;Murphy<br>
-&nbsp;Lee&nbsp;Rian<br>
-&nbsp;Roland&nbsp;Rosenfeld<br>
-&nbsp;Jörg&nbsp;Strohmayer</P
-><P
-> Former Privoxy Team Members:</P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;Johny&nbsp;Agotnes<br>
-&nbsp;Rodrigo&nbsp;Barbosa<br>
-&nbsp;Moritz&nbsp;Barsnick<br>
-&nbsp;Ian&nbsp;Cummings<br>
-&nbsp;Brian&nbsp;Dessent<br>
-&nbsp;Jon&nbsp;Foster<br>
-&nbsp;Karsten&nbsp;Hopp<br>
-&nbsp;Alexander&nbsp;Lazic<br>
-&nbsp;Daniel&nbsp;Leite<br>
-&nbsp;Gábor&nbsp;Lipták<br>
-&nbsp;Adam&nbsp;Lock<br>
-&nbsp;Guy&nbsp;Laroche<br>
-&nbsp;Justin&nbsp;McMurtry<br>
-&nbsp;Andreas&nbsp;Oesterhelt<br>
-&nbsp;Haroon&nbsp;Rafique<br>
-&nbsp;Georg&nbsp;Sauthoff<br>
-&nbsp;Thomas&nbsp;Steudten<br>
-&nbsp;Rodney&nbsp;Stromlund<br>
-&nbsp;Sviatoslav&nbsp;Sviridov<br>
-&nbsp;Sarantis&nbsp;Paskalis<br>
-&nbsp;Stefan&nbsp;Waldherr</P
-><P
-> Thanks to the many people who have tested Privoxy, reported bugs, provided
- patches, made suggestions or contributed in some way. These include (in
- alphabetical order):</P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;Ken&nbsp;Arromdee<br>
-&nbsp;Devin&nbsp;Bayer<br>
-&nbsp;Gergely&nbsp;Bor<br>
-&nbsp;Reiner&nbsp;Buehl<br>
-&nbsp;Andrew&nbsp;J.&nbsp;Caines<br>
-&nbsp;Clifford&nbsp;Caoile<br>
-&nbsp;Frédéric&nbsp;Crozat<br>
-&nbsp;Michael&nbsp;T.&nbsp;Davis<br>
-&nbsp;Mattes&nbsp;Dolak<br>
-&nbsp;Matthias&nbsp;Drochner<br>
-&nbsp;Peter&nbsp;E.<br>
-&nbsp;Florian&nbsp;Effenberger<br>
-&nbsp;Markus&nbsp;Elfring<br>
-&nbsp;Dean&nbsp;Gaudet<br>
-&nbsp;Stephen&nbsp;Gildea<br>
-&nbsp;Daniel&nbsp;Griscom<br>
-&nbsp;Felix&nbsp;Gröbert<br>
-&nbsp;Aaron&nbsp;Hamid<br>
-&nbsp;Darel&nbsp;Henman<br>
-&nbsp;Magnus&nbsp;Holmgren<br>
-&nbsp;Eric&nbsp;M.&nbsp;Hopper<br>
-&nbsp;Ralf&nbsp;Horstmann<br>
-&nbsp;Stefan&nbsp;Huehner<br>
-&nbsp;Peter&nbsp;Hyman<br>
-&nbsp;Derek&nbsp;Jennings<br>
-&nbsp;Petr&nbsp;Kadlec<br>
-&nbsp;David&nbsp;Laight<br>
-&nbsp;Bert&nbsp;van&nbsp;Leeuwen<br>
-&nbsp;Don&nbsp;Libes<br>
-&nbsp;Paul&nbsp;Lieverse<br>
-&nbsp;Toby&nbsp;Lyward<br>
-&nbsp;Wil&nbsp;Mahan<br>
-&nbsp;Jindrich&nbsp;Makovicka<br>
-&nbsp;David&nbsp;Mediavilla<br>
-&nbsp;Raphael&nbsp;Moll<br>
-&nbsp;Amuro&nbsp;Namie<br>
-&nbsp;Adam&nbsp;Piggott<br>
-&nbsp;Dan&nbsp;Price<br>
-&nbsp;Roberto&nbsp;Ragusa<br>
-&nbsp;Félix&nbsp;Rauch<br>
-&nbsp;Maynard&nbsp;Riley<br>
-&nbsp;Chung-chieh&nbsp;Shan<br>
-&nbsp;Spinor&nbsp;S.<br>
-&nbsp;Bart&nbsp;Schelstraete<br>
-&nbsp;Oliver&nbsp;Stoeneberg<br>
-&nbsp;Peter&nbsp;Thoenen<br>
-&nbsp;Martin&nbsp;Thomas<br>
-&nbsp;Bobby&nbsp;G.&nbsp;Vinyard<br>
-&nbsp;Jochen&nbsp;Voss<br>
-&nbsp;Glenn&nbsp;Washburn<br>
-&nbsp;Song&nbsp;Weijia<br>
-&nbsp;Jörg&nbsp;Weinmann<br>
-&nbsp;Darren&nbsp;Wiebe<br>
-&nbsp;Anduin&nbsp;Withers<br>
-&nbsp;Oliver&nbsp;Yeoh<br>
-&nbsp;Jamie&nbsp;Zawinski</P
-><P
-> Privoxy is based in part on code originally developed by
- Junkbusters Corp. and Anonymous Coders.</P
-><P
-> Privoxy heavily relies on Philip Hazel's PCRE.</P
-><P
-> The code to filter compressed content makes use of zlib
- which is written by Jean-loup Gailly and Mark Adler.</P
-><P
-> On systems that lack snprintf(), Privoxy is using a version
- written by Mark Martinec. On systems that lack strptime(),
- Privoxy is using the one from the GNU C Library written
- by Ulrich Drepper.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="contact.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="seealso.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Contacting the Developers, Bug Reporting and Feature
-Requests</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->See Also</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/files-in-use.jpg b/external/privoxy/doc/webserver/user-manual/files-in-use.jpg
deleted file mode 100644
index 207b6f7..0000000
Binary files a/external/privoxy/doc/webserver/user-manual/files-in-use.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/user-manual/filter-file.html b/external/privoxy/doc/webserver/user-manual/filter-file.html
deleted file mode 100644
index 3a2ec3a..0000000
--- a/external/privoxy/doc/webserver/user-manual/filter-file.html
+++ /dev/null
@@ -1,1652 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Filter Files</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Actions Files"
-HREF="actions-file.html"><LINK
-REL="NEXT"
-TITLE="Privoxy's Template Files"
-HREF="templates.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="actions-file.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="templates.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="FILTER-FILE"
->9. Filter Files</A
-></H1
-><P
-> On-the-fly text substitutions need
- to be defined in a <SPAN
-CLASS="QUOTE"
->"filter file"</SPAN
->. Once defined, they 
- can then be invoked as an <SPAN
-CLASS="QUOTE"
->"action"</SPAN
->.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> supports three different filter actions:
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
-></TT
-> to
- rewrite the content that is send to the client,
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CLIENT-HEADER-FILTER"
->client-header-filter</A
-></TT
->
- to rewrite headers that are send by the client, and
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SERVER-HEADER-FILTER"
->server-header-filter</A
-></TT
->
- to rewrite headers that are send by the server.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> also supports two tagger actions:
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CLIENT-HEADER-TAGGER"
->client-header-tagger</A
-></TT
->
- and
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SERVER-HEADER-TAGGER"
->server-header-tagger</A
-></TT
->.
- Taggers and filters use the same syntax in the filter files, the difference
- is that taggers don't modify the text they are filtering, but use a rewritten
- version of the filtered text as tag. The tags can then be used to change the
- applying actions through sections with <A
-HREF="actions-file.html#TAG-PATTERN"
->tag-patterns</A
->.</P
-><P
-> Multiple filter files can be defined through the <TT
-CLASS="LITERAL"
-> <A
-HREF="config.html#FILTERFILE"
->filterfile</A
-></TT
-> config directive. The filters
- as supplied by the developers are located in
- <TT
-CLASS="FILENAME"
->default.filter</TT
->. It is recommended that any locally
- defined or modified filters go in a separately defined file such as
- <TT
-CLASS="FILENAME"
->user.filter</TT
->.
- </P
-><P
-> Common tasks for content filters are to eliminate common annoyances in
- HTML and JavaScript, such as pop-up windows,
- exit consoles, crippled windows without navigation tools, the
- infamous &#60;BLINK&#62; tag etc, to suppress images with certain
- width and height attributes (standard banner sizes or web-bugs),
- or just to have fun.</P
-><P
-> Enabled content filters are applied to any content whose
- <SPAN
-CLASS="QUOTE"
->"Content Type"</SPAN
-> header is recognised as a sign
- of text-based content, with the exception of <TT
-CLASS="LITERAL"
->text/plain</TT
->.
- Use the <A
-HREF="actions-file.html#FORCE-TEXT-MODE"
->force-text-mode</A
-> action
- to also filter other content.</P
-><P
-> Substitutions are made at the source level, so if you want to <SPAN
-CLASS="QUOTE"
->"roll
- your own"</SPAN
-> filters, you should first be familiar with HTML syntax, 
- and, of course, regular expressions.</P
-><P
-> Just like the <A
-HREF="actions-file.html"
->actions files</A
->, the
- filter file is organized in sections, which are called <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->filters</I
-></SPAN
->
- here. Each filter consists of a heading line, that starts with one of the
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->keywords</I
-></SPAN
-> <TT
-CLASS="LITERAL"
->FILTER:</TT
->,
- <TT
-CLASS="LITERAL"
->CLIENT-HEADER-FILTER:</TT
-> or <TT
-CLASS="LITERAL"
->SERVER-HEADER-FILTER:</TT
->
- followed by the filter's <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->name</I
-></SPAN
->, and a short (one line) 
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->description</I
-></SPAN
-> of what it does. Below that line
- come the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->jobs</I
-></SPAN
->, i.e. lines that define the actual
- text substitutions. By convention, the name of a filter
- should describe what the filter <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->eliminates</I
-></SPAN
->. The
- comment is used in the <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->web-based
- user interface</A
->.</P
-><P
-> Once a filter called <TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
-> has been defined
- in the filter file, it can be invoked by using an action of the form
- +<TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filter</A
->{<TT
-CLASS="REPLACEABLE"
-><I
->name</I
-></TT
->}</TT
->
- in any <A
-HREF="actions-file.html"
->actions file</A
->.</P
-><P
-> Filter definitions start with a header line that contains the filter
- type, the filter name and the filter description.
- A content filter header line for a filter called <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
-> could look
- like this:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->FILTER: foo Replace all "foo" with "bar"</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Below that line, and up to the next header line, come the jobs that
- define what text replacements the filter executes. They are specified
- in a syntax that imitates <A
-HREF="http://www.perl.org/";
-TARGET="_top"
->Perl</A
->'s
- <TT
-CLASS="LITERAL"
->s///</TT
-> operator. If you are familiar with Perl, you
- will find this to be quite intuitive, and may want to look at the
- PCRS documentation for the subtle differences to Perl behaviour. Most
- notably, the non-standard option letter <TT
-CLASS="LITERAL"
->U</TT
-> is supported,
- which turns the default to ungreedy matching.</P
-><P
-> If you are new to 
-  <A
-HREF="http://en.wikipedia.org/wiki/Regular_expressions";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"Regular
-  Expressions"</SPAN
-></A
->, you might want to take a look at
- the <A
-HREF="appendix.html#REGEX"
->Appendix on regular expressions</A
->, and
- see the <A
-HREF="http://perldoc.perl.org/perlre.html";
-TARGET="_top"
->Perl
- manual</A
-> for
- <A
-HREF="http://perldoc.perl.org/perlop.html";
-TARGET="_top"
->the 
- <TT
-CLASS="LITERAL"
->s///</TT
-> operator's syntax</A
-> and <A
-HREF="http://perldoc.perl.org/perlre.html";
-TARGET="_top"
->Perl-style regular
- expressions</A
-> in general.
- The below examples might also help to get you started.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="AEN4447"
->9.1. Filter File Tutorial</A
-></H2
-><P
-> Now, let's complete our <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
-> content filter. We have already defined
- the heading, but the jobs are still missing. Since all it does is to replace
- <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
-> with <SPAN
-CLASS="QUOTE"
->"bar"</SPAN
->, there is only one (trivial) job
- needed:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->s/foo/bar/</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> But wait! Didn't the comment say that <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> occurrences
- of <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
-> should be replaced? Our current job will only take
- care of the first <SPAN
-CLASS="QUOTE"
->"foo"</SPAN
-> on each page. For global substitution,
- we'll need to add the <TT
-CLASS="LITERAL"
->g</TT
-> option:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->s/foo/bar/g</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Our complete filter now looks like this:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->FILTER: foo Replace all "foo" with "bar"
-s/foo/bar/g</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Let's look at some real filters for more interesting examples. Here you see
- a filter that protects against some common annoyances that arise from JavaScript
- abuse. Let's look at its jobs one after the other:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse
-
-# Get rid of JavaScript referrer tracking. Test page: http://www.randomoddness.com/untitled.htm
-#
-s|(&#60;script.*)document\.referrer(.*&#60;/script&#62;)|$1"Not Your Business!"$2|Usg</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Following the header line and a comment, you see the job. Note that it uses
- <TT
-CLASS="LITERAL"
->|</TT
-> as the delimiter instead of <TT
-CLASS="LITERAL"
->/</TT
->, because
- the pattern contains a forward slash, which would otherwise have to be escaped
- by a backslash (<TT
-CLASS="LITERAL"
->\</TT
->).</P
-><P
-> Now, let's examine the pattern: it starts with the text <TT
-CLASS="LITERAL"
->&#60;script.*</TT
->
- enclosed in parentheses. Since the dot matches any character, and <TT
-CLASS="LITERAL"
->*</TT
->
- means: <SPAN
-CLASS="QUOTE"
->"Match an arbitrary number of the element left of myself"</SPAN
->, this
- matches <SPAN
-CLASS="QUOTE"
->"&#60;script"</SPAN
->, followed by <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->any</I
-></SPAN
-> text, i.e.
- it matches the whole page, from the start of the first &#60;script&#62; tag.</P
-><P
-> That's more than we want, but the pattern continues: <TT
-CLASS="LITERAL"
->document\.referrer</TT
->
- matches only the exact string <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
->. The dot needed to
- be <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->escaped</I
-></SPAN
->, i.e. preceded by a backslash, to take away its
- special meaning as a joker, and make it just a regular dot. So far, the meaning is:
- Match from the start of the first &#60;script&#62; tag in a the page, up to, and including,
- the text <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
->, if <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->both</I
-></SPAN
-> are present
- in the page (and appear in that order).</P
-><P
-> But there's still more pattern to go. The next element, again enclosed in parentheses,
- is <TT
-CLASS="LITERAL"
->.*&#60;/script&#62;</TT
->. You already know what <TT
-CLASS="LITERAL"
->.*</TT
->
- means, so the whole pattern translates to: Match from the start of the first  &#60;script&#62;
- tag in a page to the end of the last &#60;script&#62; tag, provided that the text
- <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
-> appears somewhere in between.</P
-><P
-> This is still not the whole story, since we have ignored the options and the parentheses:
- The portions of the page matched by sub-patterns that are enclosed in parentheses, will be
- remembered and be available through the variables <TT
-CLASS="LITERAL"
->$1, $2, ...</TT
-> in
- the substitute. The <TT
-CLASS="LITERAL"
->U</TT
-> option switches to ungreedy matching, which means
- that the first <TT
-CLASS="LITERAL"
->.*</TT
-> in the pattern will only <SPAN
-CLASS="QUOTE"
->"eat up"</SPAN
-> all
- text in between <SPAN
-CLASS="QUOTE"
->"&#60;script"</SPAN
-> and the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->first</I
-></SPAN
-> occurrence
- of <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
->, and that the second <TT
-CLASS="LITERAL"
->.*</TT
-> will
- only span the text up to the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->first</I
-></SPAN
-> <SPAN
-CLASS="QUOTE"
->"&#60;/script&#62;"</SPAN
->
- tag. Furthermore, the <TT
-CLASS="LITERAL"
->s</TT
-> option says that the match may span
- multiple lines in the page, and the <TT
-CLASS="LITERAL"
->g</TT
-> option again means that the
- substitution is global.</P
-><P
-> So, to summarize, the pattern means: Match all scripts that contain the text
- <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
->. Remember the parts of the script from
- (and including) the start tag up to (and excluding) the string
- <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
-> as <TT
-CLASS="LITERAL"
->$1</TT
->, and the part following
- that string, up to and including the closing tag, as <TT
-CLASS="LITERAL"
->$2</TT
->.</P
-><P
-> Now the pattern is deciphered, but wasn't this about substituting things? So
- lets look at the substitute: <TT
-CLASS="LITERAL"
->$1"Not Your Business!"$2</TT
-> is
- easy to read: The text remembered as <TT
-CLASS="LITERAL"
->$1</TT
->, followed by 
- <TT
-CLASS="LITERAL"
->"Not Your Business!"</TT
-> (<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->including</I
-></SPAN
->
- the quotation marks!), followed by the text remembered as <TT
-CLASS="LITERAL"
->$2</TT
->.
- This produces an exact copy of the original string, with the middle part
- (the <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
->) replaced by <TT
-CLASS="LITERAL"
->"Not Your
- Business!"</TT
->.</P
-><P
-> The whole job now reads: Replace <SPAN
-CLASS="QUOTE"
->"document.referrer"</SPAN
-> by
- <TT
-CLASS="LITERAL"
->"Not Your Business!"</TT
-> wherever it appears inside a
- &#60;script&#62; tag. Note that this job won't break JavaScript syntax,
- since both the original and the replacement are syntactically valid
- string objects. The script just won't have access to the referrer
- information anymore.</P
-><P
-> We'll show you two other jobs from the JavaScript taming department, but
- this time only point out the constructs of special interest:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># The status bar is for displaying link targets, not pointless blahblah
-#
-s/window\.status\s*=\s*(['"]).*?\1/dUmMy=1/ig</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> <TT
-CLASS="LITERAL"
->\s</TT
-> stands for whitespace characters (space, tab, newline,
- carriage return, form feed), so that <TT
-CLASS="LITERAL"
->\s*</TT
-> means: <SPAN
-CLASS="QUOTE"
->"zero
- or more whitespace"</SPAN
->. The <TT
-CLASS="LITERAL"
->?</TT
-> in <TT
-CLASS="LITERAL"
->.*?</TT
->
- makes this matching of arbitrary text ungreedy. (Note that the <TT
-CLASS="LITERAL"
->U</TT
->
- option is not set). The <TT
-CLASS="LITERAL"
->['"]</TT
-> construct means: <SPAN
-CLASS="QUOTE"
->"a single
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->or</I
-></SPAN
-> a double quote"</SPAN
->. Finally, <TT
-CLASS="LITERAL"
->\1</TT
-> is
- a back-reference to the first parenthesis just like <TT
-CLASS="LITERAL"
->$1</TT
-> above,
- with the difference that in the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->pattern</I
-></SPAN
->, a backslash indicates
- a back-reference, whereas in the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->substitute</I
-></SPAN
->, it's the dollar.</P
-><P
-> So what does this job do? It replaces assignments of single- or double-quoted
- strings to the <SPAN
-CLASS="QUOTE"
->"window.status"</SPAN
-> object with a dummy assignment
- (using a variable name that is hopefully odd enough not to conflict with
- real variables in scripts). Thus, it catches many cases where e.g. pointless
- descriptions are displayed in the status bar instead of the link target when
- you move your mouse over links.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Kill OnUnload popups. Yummy. Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html
-#
-s/(&#60;body [^&#62;]*)onunload(.*&#62;)/$1never$2/iU</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Including the
- <A
-HREF="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Events-eventgroupings-htmlevents";
-TARGET="_top"
->OnUnload
- event binding</A
-> in the HTML DOM was a <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->CRIME</I
-></SPAN
->.
- When I close a browser window, I want it to close and die. Basta.
- This job replaces the <SPAN
-CLASS="QUOTE"
->"onunload"</SPAN
-> attribute in
- <SPAN
-CLASS="QUOTE"
->"&#60;body&#62;"</SPAN
-> tags with the dummy word <TT
-CLASS="LITERAL"
->never</TT
->.
- Note that the <TT
-CLASS="LITERAL"
->i</TT
-> option makes the pattern matching
- case-insensitive. Also note that ungreedy matching alone doesn't always guarantee
- a minimal match: In the first parenthesis, we had to use <TT
-CLASS="LITERAL"
->[^&#62;]*</TT
->
- instead of <TT
-CLASS="LITERAL"
->.*</TT
-> to prevent the match from exceeding the 
- &#60;body&#62; tag if it doesn't contain <SPAN
-CLASS="QUOTE"
->"OnUnload"</SPAN
->, but the page's
- content does.</P
-><P
-> The last example is from the fun department:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->FILTER: fun Fun text replacements
-
-# Spice the daily news:
-#
-s/microsoft(?!\.com)/MicroSuck/ig</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Note the <TT
-CLASS="LITERAL"
->(?!\.com)</TT
-> part (a so-called negative lookahead)
- in the job's pattern, which means: Don't match, if the string 
- <SPAN
-CLASS="QUOTE"
->".com"</SPAN
-> appears directly following <SPAN
-CLASS="QUOTE"
->"microsoft"</SPAN
->
- in the page. This prevents links to microsoft.com from being trashed, while
- still replacing the word everywhere else.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-># Buzzword Bingo (example for extended regex syntax)
-#
-s* industry[ -]leading \
-|  cutting[ -]edge \
-|  customer[ -]focused \
-|  market[ -]driven \
-|  award[ -]winning # Comments are OK, too! \
-|  high[ -]performance \
-|  solutions[ -]based \
-|  unmatched \
-|  unparalleled \
-|  unrivalled \
-*&#60;font color="red"&#62;&#60;b&#62;BINGO!&#60;/b&#62;&#60;/font&#62; \
-*igx</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The <TT
-CLASS="LITERAL"
->x</TT
-> option in this job turns on extended syntax, and allows for
- e.g. the liberal use of (non-interpreted!) whitespace for nicer formatting. </P
-><P
-> You get the idea?</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="PREDEFINED-FILTERS"
->9.2. The Pre-defined Filters</A
-></H2
-><P
->The distribution <TT
-CLASS="FILENAME"
->default.filter</TT
-> file contains a selection of
-pre-defined filters for your convenience:</P
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->js-annoyances</I
-></SPAN
-></DT
-><DD
-><P
->    The purpose of this filter is to get rid of particularly annoying JavaScript abuse.
-    To that end, it
-   <P
-></P
-><UL
-><LI
-><P
->      replaces JavaScript references to the browser's referrer information
-      with the string "Not Your Business!". This compliments the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HIDE-REFERRER"
->hide-referrer</A
-></TT
-> action on the content level.
-     </P
-></LI
-><LI
-><P
->      removes the bindings to the DOM's
-      <A
-HREF="http://www.w3.org/TR/2000/REC-DOM-Level-2-Events-20001113/events.html#Events-eventgroupings-htmlevents";
-TARGET="_top"
->unload
-      event</A
-> which we feel has no right to exist and is responsible for most <SPAN
-CLASS="QUOTE"
->"exit consoles"</SPAN
->, i.e.
-      nasty windows that pop up when you close another one.
-     </P
-></LI
-><LI
-><P
->      removes code that causes new windows to be opened with undesired properties, such as being
-      full-screen, non-resizeable, without location, status or menu bar etc.
-     </P
-></LI
-></UL
->
-   </P
-><P
->    Use with caution. This is an aggressive filter, and can break sites that 
-    rely heavily on JavaScript.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->js-events</I
-></SPAN
-></DT
-><DD
-><P
->    This is a very radical measure. It removes virtually all JavaScript event bindings, which
-    means that scripts can not react to user actions such as mouse movements or clicks, window
-    resizing etc, anymore. Use with caution!
-   </P
-><P
->    We <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->strongly discourage</I
-></SPAN
-> using this filter as a default since it breaks
-    many legitimate scripts. It is meant for use only on extra-nasty sites (should you really
-    need to go there).
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->html-annoyances</I
-></SPAN
-></DT
-><DD
-><P
->    This filter will undo many common instances of HTML based abuse.
-   </P
-><P
->    The <TT
-CLASS="LITERAL"
->BLINK</TT
-> and <TT
-CLASS="LITERAL"
->MARQUEE</TT
-> tags 
-    are neutralized (yeah baby!), and browser windows will be created as
-    resizeable (as of course they should be!), and will have location,
-    scroll and menu bars -- even if specified otherwise.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->content-cookies</I
-></SPAN
-></DT
-><DD
-><P
->    Most cookies are set in the HTTP dialog, where they can be intercepted
-    by the
-    <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-></TT
->
-    and <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
-></TT
->
-    actions. But web sites increasingly make use of HTML meta tags and JavaScript
-    to sneak cookies to the browser on the content level.
-   </P
-><P
->    This filter disables most HTML and JavaScript code that reads or sets
-    cookies. It cannot detect all clever uses of these types of code, so it 
-    should not be relied on as an absolute fix. Use it wherever you would also
-    use the cookie crunch actions. 
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->refresh tags</I
-></SPAN
-></DT
-><DD
-><P
->    Disable any refresh tags if the interval is greater than nine seconds (so 
-    that redirections done via refresh tags are not destroyed). This is useful 
-    for dial-on-demand setups, or for those who find this HTML feature
-    annoying.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->unsolicited-popups</I
-></SPAN
-></DT
-><DD
-><P
->    This filter attempts to prevent only <SPAN
-CLASS="QUOTE"
->"unsolicited"</SPAN
-> pop-up 
-    windows from opening, yet still allow pop-up windows that the user 
-    has explicitly chosen to open. It was added in version 3.0.1, 
-    as an improvement over earlier such filters.
-   </P
-><P
->    Technical note: The filter works by redefining the window.open JavaScript
-    function to a dummy function, <TT
-CLASS="LITERAL"
->PrivoxyWindowOpen()</TT
->,
-    during the loading and rendering phase of each HTML page access, and
-    restoring the function afterward.
-   </P
-><P
->    This is recommended only for browsers that cannot perform this function
-    reliably themselves. And be aware that some sites require such windows 
-    in order to function normally. Use with caution.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all-popups</I
-></SPAN
-></DT
-><DD
-><P
->    Attempt to prevent <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> pop-up windows from opening.
-    Note this should be used with even more discretion than the above, since
-    it is more likely to break some sites that require pop-ups for normal
-    usage. Use with caution.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->img-reorder</I
-></SPAN
-></DT
-><DD
-><P
->    This is a helper filter that has no value if used alone. It makes the
-    <TT
-CLASS="LITERAL"
->banners-by-size</TT
-> and <TT
-CLASS="LITERAL"
->banners-by-link</TT
->
-    (see below) filters more effective and should be enabled together with them.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->banners-by-size</I
-></SPAN
-></DT
-><DD
-><P
->    This filter removes image tags purely based on what size they are. Fortunately 
-    for us, many ads and banner images tend to conform to certain standardized
-    sizes, which makes this filter quite effective for ad stripping purposes.
-   </P
-><P
->    Occasionally this filter will cause false positives on images that are not ads,
-    but just happen to be of one of the standard banner sizes.
-   </P
-><P
->    Recommended only for those who require extreme ad blocking. The default 
-    block rules should catch 95+% of all ads <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->without</I
-></SPAN
-> this filter enabled.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->banners-by-link</I
-></SPAN
-></DT
-><DD
-><P
->    This is an experimental filter that attempts to kill any banners if 
-    their URLs seem to point to known or suspected click trackers. It is currently
-    not of much value and is not recommended for use by default.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->webbugs</I
-></SPAN
-></DT
-><DD
-><P
->    Webbugs are small, invisible images (technically 1X1 GIF images), that 
-    are used to track users across websites, and collect information on them.
-    As an HTML page is loaded by the browser, an embedded image tag causes the
-    browser to contact a third-party site, disclosing the tracking information
-    through the requested URL and/or cookies for that third-party domain, without
-    the user ever becoming aware of the interaction with the third-party site.
-    HTML-ized spam also uses a similar technique to verify email addresses.
-   </P
-><P
->    This filter removes the HTML code that loads such <SPAN
-CLASS="QUOTE"
->"webbugs"</SPAN
->.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->tiny-textforms</I
-></SPAN
-></DT
-><DD
-><P
->    A rather special-purpose filter that can be used to enlarge textareas (those
-    multi-line text boxes in web forms) and turn off hard word wrap in them. 
-    It was written for the sourceforge.net tracker system where such boxes are
-    a nuisance, but it can be handy on other sites, too.
-   </P
-><P
->    It is not recommended to use this filter as a default.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->jumping-windows</I
-></SPAN
-></DT
-><DD
-><P
->    Many consider windows that move, or resize themselves to be abusive. This filter
-    neutralizes the related JavaScript code. Note that some sites might not display
-    or behave as intended when using this filter. Use with caution.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->frameset-borders</I
-></SPAN
-></DT
-><DD
-><P
->    Some web designers seem to assume that everyone in the world will view their
-    web sites using the same browser brand and version, screen resolution etc,
-    because only that assumption could explain why they'd use static frame sizes,
-    yet prevent their frames from being resized by the user, should they be too
-    small to show their whole content.
-   </P
-><P
->    This filter removes the related HTML code. It should only be applied to sites
-    which need it.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->demoronizer</I
-></SPAN
-></DT
-><DD
-><P
->    Many Microsoft products that generate HTML use non-standard extensions (read:
-    violations) of the ISO 8859-1 aka Latin-1 character set. This can cause those
-    HTML documents to display with errors on standard-compliant platforms. 
-   </P
-><P
->    This filter translates the MS-only characters into Latin-1 equivalents. 
-    It is not necessary when using MS products, and will cause corruption of  
-    all documents that use 8-bit character sets other than Latin-1. It's mostly
-    worthwhile for Europeans on non-MS platforms, if weird garbage characters
-    sometimes appear on some pages, or user agents that don't correct for this on 
-    the fly.
- 
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->shockwave-flash</I
-></SPAN
-></DT
-><DD
-><P
->    A filter for shockwave haters. As the name suggests, this filter strips code
-    out of web pages that is used to embed shockwave flash objects. 
-   </P
-><P
->   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->quicktime-kioskmode</I
-></SPAN
-></DT
-><DD
-><P
->    Change HTML code that embeds Quicktime objects so that kioskmode, which
-    prevents saving, is disabled.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->fun</I
-></SPAN
-></DT
-><DD
-><P
->    Text replacements for subversive browsing fun. Make fun of your favorite
-    Monopolist or play buzzword bingo.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->crude-parental</I
-></SPAN
-></DT
-><DD
-><P
->    A demonstration-only filter that shows how <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    can be used to delete web content on a keyword basis.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->ie-exploits</I
-></SPAN
-></DT
-><DD
-><P
->    An experimental collection of text replacements to disable malicious HTML and JavaScript
-    code that exploits known security holes in Internet Explorer.
-   </P
-><P
->    Presently, it only protects against Nimda and a cross-site scripting bug, and
-    would need active maintenance to provide more substantial protection.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->site-specifics</I
-></SPAN
-></DT
-><DD
-><P
->    Some web sites have very specific problems, the cure for which doesn't apply
-    anywhere else, or could even cause damage on other sites.
-   </P
-><P
->    This is a collection of such site-specific cures which should only be applied
-    to the sites they were intended for, which is what the supplied
-    <TT
-CLASS="FILENAME"
->default.action</TT
-> file does. Users shouldn't need to change
-    anything regarding this filter.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->google</I
-></SPAN
-></DT
-><DD
-><P
->    A CSS based block for Google text ads. Also removes a width limitation
-    and the toolbar advertisement.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->yahoo</I
-></SPAN
-></DT
-><DD
-><P
->    Another CSS based block, this time for Yahoo text ads. And removes 
-    a width limitation as well.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->msn</I
-></SPAN
-></DT
-><DD
-><P
->    Another CSS based block, this time for MSN text ads. And removes 
-    tracking URLs, as well as a width limitation.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->blogspot</I
-></SPAN
-></DT
-><DD
-><P
->    Cleans up some Blogspot blogs. Read the fine print before using this one!
-   </P
-><P
->    This filter also intentionally removes some navigation stuff and sets the
-    page width to 100%. As a result, some rounded <SPAN
-CLASS="QUOTE"
->"corners"</SPAN
-> would
-    appear to early or not at all and as fixing this would require a browser
-    that understands background-size (CSS3), they are removed instead.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->xml-to-html</I
-></SPAN
-></DT
-><DD
-><P
->    Server-header filter to change the Content-Type from xml to html.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->html-to-xml</I
-></SPAN
-></DT
-><DD
-><P
->    Server-header filter to change the Content-Type from html to xml.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->no-ping</I
-></SPAN
-></DT
-><DD
-><P
->    Removes the non-standard <TT
-CLASS="LITERAL"
->ping</TT
-> attribute from
-    anchor and area HTML tags.
-   </P
-></DD
-><DT
-><SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->hide-tor-exit-notation</I
-></SPAN
-></DT
-><DD
-><P
->    Client-header filter to remove the <B
-CLASS="COMMAND"
->Tor</B
-> exit node notation
-    found in Host and Referer headers.
-   </P
-><P
->    If <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> and <B
-CLASS="COMMAND"
->Tor</B
-> are chained and <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-    is configured to use socks4a, one can use <SPAN
-CLASS="QUOTE"
->"http://www.example.org.foobar.exit/";</SPAN
->
-    to access the host <SPAN
-CLASS="QUOTE"
->"www.example.org"</SPAN
-> through the
-    <B
-CLASS="COMMAND"
->Tor</B
-> exit node <SPAN
-CLASS="QUOTE"
->"foobar"</SPAN
->.
-   </P
-><P
->    As the HTTP client isn't aware of this notation, it treats the
-    whole string <SPAN
-CLASS="QUOTE"
->"www.example.org.foobar.exit"</SPAN
-> as host and uses it
-    for the <SPAN
-CLASS="QUOTE"
->"Host"</SPAN
-> and <SPAN
-CLASS="QUOTE"
->"Referer"</SPAN
-> headers. From the
-    server's point of view the resulting headers are invalid and can cause problems.
-   </P
-><P
->    An invalid <SPAN
-CLASS="QUOTE"
->"Referer"</SPAN
-> header can trigger <SPAN
-CLASS="QUOTE"
->"hot-linking"</SPAN
->
-    protections, an invalid <SPAN
-CLASS="QUOTE"
->"Host"</SPAN
-> header will make it impossible for
-    the server to find the right vhost (several domains hosted on the same IP address).
-   </P
-><P
->    This client-header filter removes the <SPAN
-CLASS="QUOTE"
->"foo.exit"</SPAN
-> part in those headers
-    to prevent the mentioned problems. Note that it only modifies
-    the HTTP headers, it doesn't make it impossible for the server
-    to detect your <B
-CLASS="COMMAND"
->Tor</B
-> exit node based on the IP address
-    the request is coming from.
-   </P
-></DD
-></DL
-></DIV
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="actions-file.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="templates.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Actions Files</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Privoxy's Template Files</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/index.html b/external/privoxy/doc/webserver/user-manual/index.html
deleted file mode 100644
index 366386b..0000000
--- a/external/privoxy/doc/webserver/user-manual/index.html
+++ /dev/null
@@ -1,963 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy 3.0.12 User Manual</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="NEXT"
-TITLE="Introduction"
-HREF="introduction.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="ARTICLE"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="ARTICLE"
-><DIV
-CLASS="TITLEPAGE"
-><H1
-CLASS="TITLE"
-><A
-NAME="AEN2"
->Privoxy 3.0.12 User Manual</A
-></H1
-><P
-CLASS="PUBDATE"
-> <SUB
-> <A
-HREF="copyright.html"
->Copyright</A
-> © 2001-2009 by 
- <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->Privoxy Developers</A
->
- </SUB
-><BR></P
-><P
-CLASS="PUBDATE"
->$Id: index.html,v 1.60 2009/03/21 12:58:53 fabiankeil Exp $<BR></P
-><DIV
-><DIV
-CLASS="ABSTRACT"
-><P
-></P
-><A
-NAME="AEN9"
-></A
-><P
->  The <I
-CLASS="CITETITLE"
->Privoxy User Manual</I
-> gives users information on how to
-  install, configure and use <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->Privoxy</A
->.
- </P
-><P
-> Privoxy is a non-caching web proxy with advanced filtering capabilities
- for enhancing privacy, modifying web page data and HTTP headers, controlling
- access, and removing ads and other obnoxious Internet junk. Privoxy has a
- flexible configuration and can be customized to suit individual needs and tastes.
- It has application for both stand-alone systems and multi-user networks.</P
-><P
-> Privoxy is Free Software and licensed under the GPL2.</P
-><P
-> Privoxy is an associated project of Software in the Public Interest (SPI).
- <A
-HREF="http://www.privoxy.org/faq/general.html#DONATE";
-TARGET="_top"
->Donations are welcome</A
->.</P
-><P
->  You can find the latest version of the <I
-CLASS="CITETITLE"
->Privoxy User Manual</I
-> at  <A
-HREF="http://www.privoxy.org/user-manual/";
-TARGET="_top"
->http://www.privoxy.org/user-manual/</A
->.
-  Please see the <A
-HREF="contact.html"
->Contact section</A
-> on how to
-  contact the developers.
- </P
-><P
-></P
-></DIV
-></DIV
-><HR></DIV
-><DIV
-CLASS="TOC"
-><DL
-><DT
-><B
->Table of Contents</B
-></DT
-><DT
->1. <A
-HREF="introduction.html"
->Introduction</A
-></DT
-><DD
-><DL
-><DT
->1.1. <A
-HREF="introduction.html#FEATURES"
->Features</A
-></DT
-></DL
-></DD
-><DT
->2. <A
-HREF="installation.html"
->Installation</A
-></DT
-><DD
-><DL
-><DT
->2.1. <A
-HREF="installation.html#INSTALLATION-PACKAGES"
->Binary Packages</A
-></DT
-><DD
-><DL
-><DT
->2.1.1. <A
-HREF="installation.html#INSTALLATION-PACK-RPM"
->Red Hat and Fedora RPMs</A
-></DT
-><DT
->2.1.2. <A
-HREF="installation.html#INSTALLATION-DEB"
->Debian and Ubuntu</A
-></DT
-><DT
->2.1.3. <A
-HREF="installation.html#INSTALLATION-PACK-WIN"
->Windows</A
-></DT
-><DT
->2.1.4. <A
-HREF="installation.html#INSTALLATION-PACK-BINTGZ"
->Solaris</A
-></DT
-><DT
->2.1.5. <A
-HREF="installation.html#INSTALLATION-OS2"
->OS/2</A
-></DT
-><DT
->2.1.6. <A
-HREF="installation.html#INSTALLATION-MAC"
->Mac OS X</A
-></DT
-><DT
->2.1.7. <A
-HREF="installation.html#INSTALLATION-AMIGA"
->AmigaOS</A
-></DT
-><DT
->2.1.8. <A
-HREF="installation.html#INSTALLATION-TBZ"
->FreeBSD</A
-></DT
-><DT
->2.1.9. <A
-HREF="installation.html#INSTALLATTION-GENTOO"
->Gentoo</A
-></DT
-></DL
-></DD
-><DT
->2.2. <A
-HREF="installation.html#INSTALLATION-SOURCE"
->Building from Source</A
-></DT
-><DT
->2.3. <A
-HREF="installation.html#INSTALLATION-KEEPUPDATED"
->Keeping your Installation Up-to-Date</A
-></DT
-></DL
-></DD
-><DT
->3. <A
-HREF="whatsnew.html"
->What's New in this Release</A
-></DT
-><DD
-><DL
-><DT
->3.1. <A
-HREF="whatsnew.html#UPGRADERSNOTE"
->Note to Upgraders</A
-></DT
-></DL
-></DD
-><DT
->4. <A
-HREF="quickstart.html"
->Quickstart to Using Privoxy</A
-></DT
-><DD
-><DL
-><DT
->4.1. <A
-HREF="quickstart.html#QUICKSTART-AD-BLOCKING"
->Quickstart to Ad Blocking</A
-></DT
-></DL
-></DD
-><DT
->5. <A
-HREF="startup.html"
->Starting Privoxy</A
-></DT
-><DD
-><DL
-><DT
->5.1. <A
-HREF="startup.html#START-REDHAT"
->Red Hat and Fedora</A
-></DT
-><DT
->5.2. <A
-HREF="startup.html#START-DEBIAN"
->Debian</A
-></DT
-><DT
->5.3. <A
-HREF="startup.html#START-WINDOWS"
->Windows</A
-></DT
-><DT
->5.4. <A
-HREF="startup.html#START-UNICES"
->Solaris, NetBSD, FreeBSD, HP-UX and others</A
-></DT
-><DT
->5.5. <A
-HREF="startup.html#START-OS2"
->OS/2</A
-></DT
-><DT
->5.6. <A
-HREF="startup.html#START-MACOSX"
->Mac OS X</A
-></DT
-><DT
->5.7. <A
-HREF="startup.html#START-AMIGAOS"
->AmigaOS</A
-></DT
-><DT
->5.8. <A
-HREF="startup.html#START-GENTOO"
->Gentoo</A
-></DT
-><DT
->5.9. <A
-HREF="startup.html#CMDOPTIONS"
->Command Line Options</A
-></DT
-></DL
-></DD
-><DT
->6. <A
-HREF="configuration.html"
->Privoxy Configuration</A
-></DT
-><DD
-><DL
-><DT
->6.1. <A
-HREF="configuration.html#AEN776"
->Controlling Privoxy with Your Web Browser</A
-></DT
-><DT
->6.2. <A
-HREF="configuration.html#CONFOVERVIEW"
->Configuration Files Overview</A
-></DT
-></DL
-></DD
-><DT
->7. <A
-HREF="config.html"
->The Main Configuration File</A
-></DT
-><DD
-><DL
-><DT
->7.1. <A
-HREF="config.html#LOCAL-SET-UP"
->Local Set-up Documentation</A
-></DT
-><DD
-><DL
-><DT
->7.1.1. <A
-HREF="config.html#USER-MANUAL"
->user-manual</A
-></DT
-><DT
->7.1.2. <A
-HREF="config.html#TRUST-INFO-URL"
->trust-info-url</A
-></DT
-><DT
->7.1.3. <A
-HREF="config.html#ADMIN-ADDRESS"
->admin-address</A
-></DT
-><DT
->7.1.4. <A
-HREF="config.html#PROXY-INFO-URL"
->proxy-info-url</A
-></DT
-></DL
-></DD
-><DT
->7.2. <A
-HREF="config.html#CONF-LOG-LOC"
->Configuration and Log File Locations</A
-></DT
-><DD
-><DL
-><DT
->7.2.1. <A
-HREF="config.html#CONFDIR"
->confdir</A
-></DT
-><DT
->7.2.2. <A
-HREF="config.html#TEMPLDIR"
->templdir</A
-></DT
-><DT
->7.2.3. <A
-HREF="config.html#LOGDIR"
->logdir</A
-></DT
-><DT
->7.2.4. <A
-HREF="config.html#ACTIONSFILE"
->actionsfile</A
-></DT
-><DT
->7.2.5. <A
-HREF="config.html#FILTERFILE"
->filterfile</A
-></DT
-><DT
->7.2.6. <A
-HREF="config.html#LOGFILE"
->logfile</A
-></DT
-><DT
->7.2.7. <A
-HREF="config.html#TRUSTFILE"
->trustfile</A
-></DT
-></DL
-></DD
-><DT
->7.3. <A
-HREF="config.html#DEBUGGING"
->Debugging</A
-></DT
-><DD
-><DL
-><DT
->7.3.1. <A
-HREF="config.html#DEBUG"
->debug</A
-></DT
-><DT
->7.3.2. <A
-HREF="config.html#SINGLE-THREADED"
->single-threaded</A
-></DT
-><DT
->7.3.3. <A
-HREF="config.html#HOSTNAME"
->hostname</A
-></DT
-></DL
-></DD
-><DT
->7.4. <A
-HREF="config.html#ACCESS-CONTROL"
->Access Control and Security</A
-></DT
-><DD
-><DL
-><DT
->7.4.1. <A
-HREF="config.html#LISTEN-ADDRESS"
->listen-address</A
-></DT
-><DT
->7.4.2. <A
-HREF="config.html#TOGGLE"
->toggle</A
-></DT
-><DT
->7.4.3. <A
-HREF="config.html#ENABLE-REMOTE-TOGGLE"
->enable-remote-toggle</A
-></DT
-><DT
->7.4.4. <A
-HREF="config.html#ENABLE-REMOTE-HTTP-TOGGLE"
->enable-remote-http-toggle</A
-></DT
-><DT
->7.4.5. <A
-HREF="config.html#ENABLE-EDIT-ACTIONS"
->enable-edit-actions</A
-></DT
-><DT
->7.4.6. <A
-HREF="config.html#ENFORCE-BLOCKS"
->enforce-blocks</A
-></DT
-><DT
->7.4.7. <A
-HREF="config.html#ACLS"
->ACLs: permit-access and deny-access</A
-></DT
-><DT
->7.4.8. <A
-HREF="config.html#BUFFER-LIMIT"
->buffer-limit</A
-></DT
-></DL
-></DD
-><DT
->7.5. <A
-HREF="config.html#FORWARDING"
->Forwarding</A
-></DT
-><DD
-><DL
-><DT
->7.5.1. <A
-HREF="config.html#FORWARD"
->forward</A
-></DT
-><DT
->7.5.2. <A
-HREF="config.html#SOCKS"
->forward-socks4, forward-socks4a and forward-socks5</A
-></DT
-><DT
->7.5.3. <A
-HREF="config.html#ADVANCED-FORWARDING-EXAMPLES"
->Advanced Forwarding Examples</A
-></DT
-><DT
->7.5.4. <A
-HREF="config.html#FORWARDED-CONNECT-RETRIES"
->forwarded-connect-retries</A
-></DT
-><DT
->7.5.5. <A
-HREF="config.html#ACCEPT-INTERCEPTED-REQUESTS"
->accept-intercepted-requests</A
-></DT
-><DT
->7.5.6. <A
-HREF="config.html#ALLOW-CGI-REQUEST-CRUNCHING"
->allow-cgi-request-crunching</A
-></DT
-><DT
->7.5.7. <A
-HREF="config.html#SPLIT-LARGE-FORMS"
->split-large-forms</A
-></DT
-><DT
->7.5.8. <A
-HREF="config.html#KEEP-ALIVE-TIMEOUT"
->keep-alive-timeout</A
-></DT
-><DT
->7.5.9. <A
-HREF="config.html#SOCKET-TIMEOUT"
->socket-timeout</A
-></DT
-></DL
-></DD
-><DT
->7.6. <A
-HREF="config.html#WINDOWS-GUI"
->Windows GUI Options</A
-></DT
-></DL
-></DD
-><DT
->8. <A
-HREF="actions-file.html"
->Actions Files</A
-></DT
-><DD
-><DL
-><DT
->8.1. <A
-HREF="actions-file.html#AEN2288"
->Finding the Right Mix</A
-></DT
-><DT
->8.2. <A
-HREF="actions-file.html#AEN2295"
->How to Edit</A
-></DT
-><DT
->8.3. <A
-HREF="actions-file.html#ACTIONS-APPLY"
->How Actions are Applied to Requests</A
-></DT
-><DT
->8.4. <A
-HREF="actions-file.html#AF-PATTERNS"
->Patterns</A
-></DT
-><DD
-><DL
-><DT
->8.4.1. <A
-HREF="actions-file.html#AEN2386"
->The Domain Pattern</A
-></DT
-><DT
->8.4.2. <A
-HREF="actions-file.html#AEN2462"
->The Path Pattern</A
-></DT
-><DT
->8.4.3. <A
-HREF="actions-file.html#TAG-PATTERN"
->The Tag Pattern</A
-></DT
-></DL
-></DD
-><DT
->8.5. <A
-HREF="actions-file.html#ACTIONS"
->Actions</A
-></DT
-><DD
-><DL
-><DT
->8.5.1. <A
-HREF="actions-file.html#ADD-HEADER"
->add-header</A
-></DT
-><DT
->8.5.2. <A
-HREF="actions-file.html#BLOCK"
->block</A
-></DT
-><DT
->8.5.3. <A
-HREF="actions-file.html#CHANGE-X-FORWARDED-FOR"
->change-x-forwarded-for</A
-></DT
-><DT
->8.5.4. <A
-HREF="actions-file.html#CLIENT-HEADER-FILTER"
->client-header-filter</A
-></DT
-><DT
->8.5.5. <A
-HREF="actions-file.html#CLIENT-HEADER-TAGGER"
->client-header-tagger</A
-></DT
-><DT
->8.5.6. <A
-HREF="actions-file.html#CONTENT-TYPE-OVERWRITE"
->content-type-overwrite</A
-></DT
-><DT
->8.5.7. <A
-HREF="actions-file.html#CRUNCH-CLIENT-HEADER"
->crunch-client-header</A
-></DT
-><DT
->8.5.8. <A
-HREF="actions-file.html#CRUNCH-IF-NONE-MATCH"
->crunch-if-none-match</A
-></DT
-><DT
->8.5.9. <A
-HREF="actions-file.html#CRUNCH-INCOMING-COOKIES"
->crunch-incoming-cookies</A
-></DT
-><DT
->8.5.10. <A
-HREF="actions-file.html#CRUNCH-SERVER-HEADER"
->crunch-server-header</A
-></DT
-><DT
->8.5.11. <A
-HREF="actions-file.html#CRUNCH-OUTGOING-COOKIES"
->crunch-outgoing-cookies</A
-></DT
-><DT
->8.5.12. <A
-HREF="actions-file.html#DEANIMATE-GIFS"
->deanimate-gifs</A
-></DT
-><DT
->8.5.13. <A
-HREF="actions-file.html#DOWNGRADE-HTTP-VERSION"
->downgrade-http-version</A
-></DT
-><DT
->8.5.14. <A
-HREF="actions-file.html#FAST-REDIRECTS"
->fast-redirects</A
-></DT
-><DT
->8.5.15. <A
-HREF="actions-file.html#FILTER"
->filter</A
-></DT
-><DT
->8.5.16. <A
-HREF="actions-file.html#FORCE-TEXT-MODE"
->force-text-mode</A
-></DT
-><DT
->8.5.17. <A
-HREF="actions-file.html#FORWARD-OVERRIDE"
->forward-override</A
-></DT
-><DT
->8.5.18. <A
-HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT"
->handle-as-empty-document</A
-></DT
-><DT
->8.5.19. <A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></DT
-><DT
->8.5.20. <A
-HREF="actions-file.html#HIDE-ACCEPT-LANGUAGE"
->hide-accept-language</A
-></DT
-><DT
->8.5.21. <A
-HREF="actions-file.html#HIDE-CONTENT-DISPOSITION"
->hide-content-disposition</A
-></DT
-><DT
->8.5.22. <A
-HREF="actions-file.html#HIDE-IF-MODIFIED-SINCE"
->hide-if-modified-since</A
-></DT
-><DT
->8.5.23. <A
-HREF="actions-file.html#HIDE-FROM-HEADER"
->hide-from-header</A
-></DT
-><DT
->8.5.24. <A
-HREF="actions-file.html#HIDE-REFERRER"
->hide-referrer</A
-></DT
-><DT
->8.5.25. <A
-HREF="actions-file.html#HIDE-USER-AGENT"
->hide-user-agent</A
-></DT
-><DT
->8.5.26. <A
-HREF="actions-file.html#LIMIT-CONNECT"
->limit-connect</A
-></DT
-><DT
->8.5.27. <A
-HREF="actions-file.html#PREVENT-COMPRESSION"
->prevent-compression</A
-></DT
-><DT
->8.5.28. <A
-HREF="actions-file.html#OVERWRITE-LAST-MODIFIED"
->overwrite-last-modified</A
-></DT
-><DT
->8.5.29. <A
-HREF="actions-file.html#REDIRECT"
->redirect</A
-></DT
-><DT
->8.5.30. <A
-HREF="actions-file.html#SERVER-HEADER-FILTER"
->server-header-filter</A
-></DT
-><DT
->8.5.31. <A
-HREF="actions-file.html#SERVER-HEADER-TAGGER"
->server-header-tagger</A
-></DT
-><DT
->8.5.32. <A
-HREF="actions-file.html#SESSION-COOKIES-ONLY"
->session-cookies-only</A
-></DT
-><DT
->8.5.33. <A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></DT
-><DT
->8.5.34. <A
-HREF="actions-file.html#AEN4093"
->Summary</A
-></DT
-></DL
-></DD
-><DT
->8.6. <A
-HREF="actions-file.html#ALIASES"
->Aliases</A
-></DT
-><DT
->8.7. <A
-HREF="actions-file.html#ACT-EXAMPLES"
->Actions Files Tutorial</A
-></DT
-><DD
-><DL
-><DT
->8.7.1. <A
-HREF="actions-file.html#AEN4157"
->match-all.action</A
-></DT
-><DT
->8.7.2. <A
-HREF="actions-file.html#AEN4179"
->default.action</A
-></DT
-><DT
->8.7.3. <A
-HREF="actions-file.html#AEN4292"
->user.action</A
-></DT
-></DL
-></DD
-></DL
-></DD
-><DT
->9. <A
-HREF="filter-file.html"
->Filter Files</A
-></DT
-><DD
-><DL
-><DT
->9.1. <A
-HREF="filter-file.html#AEN4447"
->Filter File Tutorial</A
-></DT
-><DT
->9.2. <A
-HREF="filter-file.html#PREDEFINED-FILTERS"
->The Pre-defined Filters</A
-></DT
-></DL
-></DD
-><DT
->10. <A
-HREF="templates.html"
->Privoxy's Template Files</A
-></DT
-><DT
->11. <A
-HREF="contact.html"
->Contacting the Developers, Bug Reporting and Feature
-Requests</A
-></DT
-><DD
-><DL
-><DT
->11.1. <A
-HREF="contact.html#CONTACT-SUPPORT"
->Get Support</A
-></DT
-><DT
->11.2. <A
-HREF="contact.html#REPORTING"
->Reporting Problems</A
-></DT
-><DD
-><DL
-><DT
->11.2.1. <A
-HREF="contact.html#CONTACT-ADS"
->Reporting Ads or Other Configuration Problems</A
-></DT
-><DT
->11.2.2. <A
-HREF="contact.html#CONTACT-BUGS"
->Reporting Bugs</A
-></DT
-></DL
-></DD
-><DT
->11.3. <A
-HREF="contact.html#CONTACT-FEATURE"
->Request New Features</A
-></DT
-><DT
->11.4. <A
-HREF="contact.html#CONTACT-OTHER"
->Other</A
-></DT
-></DL
-></DD
-><DT
->12. <A
-HREF="copyright.html"
->Privoxy Copyright, License and History</A
-></DT
-><DD
-><DL
-><DT
->12.1. <A
-HREF="copyright.html#AEN4921"
->License</A
-></DT
-><DT
->12.2. <A
-HREF="copyright.html#HISTORY"
->History</A
-></DT
-><DT
->12.3. <A
-HREF="copyright.html#AUTHORS"
->Authors</A
-></DT
-></DL
-></DD
-><DT
->13. <A
-HREF="seealso.html"
->See Also</A
-></DT
-><DT
->14. <A
-HREF="appendix.html"
->Appendix</A
-></DT
-><DD
-><DL
-><DT
->14.1. <A
-HREF="appendix.html#REGEX"
->Regular Expressions</A
-></DT
-><DT
->14.2. <A
-HREF="appendix.html#AEN5174"
->Privoxy's Internal Pages</A
-></DT
-><DD
-><DL
-><DT
->14.2.1. <A
-HREF="appendix.html#BOOKMARKLETS"
->Bookmarklets</A
-></DT
-></DL
-></DD
-><DT
->14.3. <A
-HREF="appendix.html#CHAIN"
->Chain of Events</A
-></DT
-><DT
->14.4. <A
-HREF="appendix.html#ACTIONSANAT"
->Troubleshooting: Anatomy of an Action</A
-></DT
-></DL
-></DD
-></DL
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="introduction.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Introduction</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/installation.html b/external/privoxy/doc/webserver/user-manual/installation.html
deleted file mode 100644
index f5fefc2..0000000
--- a/external/privoxy/doc/webserver/user-manual/installation.html
+++ /dev/null
@@ -1,1082 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Installation</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Introduction"
-HREF="introduction.html"><LINK
-REL="NEXT"
-TITLE="What's New in this Release"
-HREF="whatsnew.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="introduction.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="whatsnew.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="INSTALLATION"
->2. Installation</A
-></H1
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is available both in convenient pre-compiled
- packages for a wide range of operating systems, and as raw source code.
- For most users, we recommend using the packages, which can be downloaded from our
- <A
-HREF="http://sourceforge.net/projects/ijbswa/";
-TARGET="_top"
->Privoxy Project
- Page</A
->.</P
-><P
-> Note: 
- On some platforms, the installer may remove previously installed versions, if 
- found. (See below for your platform). In any case <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->be sure to backup
- your old configuration if it is valuable to you.</I
-></SPAN
-> See the <A
-HREF="whatsnew.html#UPGRADERSNOTE"
->note to upgraders</A
-> section below.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="INSTALLATION-PACKAGES"
->2.1. Binary Packages</A
-></H2
-><P
->How to install the binary packages depends on your operating system:</P
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-PACK-RPM"
->2.1.1. Red Hat and Fedora RPMs</A
-></H3
-><P
-> RPMs can be installed with <TT
-CLASS="LITERAL"
->rpm -Uvh privoxy-3.0.12-1.rpm</TT
->,
- and will use <TT
-CLASS="FILENAME"
->/etc/privoxy</TT
-> for the location 
- of configuration files.</P
-><P
-> Note that on Red Hat, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->not</I
-></SPAN
-> be automatically started on system boot. You will
- need to enable that using <B
-CLASS="COMMAND"
->chkconfig</B
->,
- <B
-CLASS="COMMAND"
->ntsysv</B
->, or similar methods. </P
-><P
-> If you have problems with failed dependencies, try rebuilding the SRC RPM: 
- <TT
-CLASS="LITERAL"
->rpm --rebuild privoxy-3.0.12-1.src.rpm</TT
->. This 
- will use your locally installed libraries and RPM version. </P
-><P
-> Also note that if you have a <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
-> RPM installed
- on your system, you need to remove it first, because the packages conflict.
- Otherwise, RPM will try to remove <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
->
- automatically if found, before installing <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-DEB"
->2.1.2. Debian and Ubuntu</A
-></H3
-><P
-> DEBs can be installed with <TT
-CLASS="LITERAL"
->apt-get install privoxy</TT
->,
- and will use <TT
-CLASS="FILENAME"
->/etc/privoxy</TT
-> for the location of 
- configuration files.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-PACK-WIN"
->2.1.3. Windows</A
-></H3
-><P
-> Just double-click the installer, which will guide you through
- the installation process. You will find the configuration files
- in the same directory as you installed <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> in. </P
-><P
-> Version 3.0.5 beta introduced full <SPAN
-CLASS="APPLICATION"
->Windows</SPAN
-> service
- functionality. On Windows only, the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- program has two new command line arguments to install and uninstall
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as a <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->service</I
-></SPAN
->.</P
-><P
-></P
-><DIV
-CLASS="VARIABLELIST"
-><DL
-><DT
->Arguments:</DT
-><DD
-><P
->     <TT
-CLASS="REPLACEABLE"
-><I
->--install</I
-></TT
->[:<TT
-CLASS="REPLACEABLE"
-><I
->service_name</I
-></TT
->]
-    </P
-><P
->     <TT
-CLASS="REPLACEABLE"
-><I
->--uninstall</I
-></TT
->[:<TT
-CLASS="REPLACEABLE"
-><I
->service_name</I
-></TT
->]
-    </P
-></DD
-></DL
-></DIV
-><P
-> After invoking <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> with
- <B
-CLASS="COMMAND"
->--install</B
->, you will need to bring up the
- <SPAN
-CLASS="APPLICATION"
->Windows</SPAN
-> service console to assign the user you
- want <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to run under, and whether or not you
- want it to run whenever the system starts. You can start the
- <SPAN
-CLASS="APPLICATION"
->Windows</SPAN
-> services console with the following
- command: <B
-CLASS="COMMAND"
->services.msc</B
->.  If you do not take the manual step
- of modifying <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> service settings, it will
- not start.  Note too that you will need to give Privoxy a user account that
- actually exists, or it will not be permitted to 
- write to its log and configuration files.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-PACK-BINTGZ"
->2.1.4. Solaris</A
-></H3
-><P
-> Create a new directory, <TT
-CLASS="LITERAL"
->cd</TT
-> to it, then unzip and
- untar the archive. For the most part, you'll have to figure out where
- things go. </P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-OS2"
->2.1.5. OS/2</A
-></H3
-><P
-> First, make sure that no previous installations of
- <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
-> and / or 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> are left on your
- system. Check that no <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
->
- or <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> objects are in
- your startup folder.&#13;</P
-><P
-> Then, just double-click the WarpIN self-installing archive, which will
- guide you through the installation process. A shadow of the
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> executable will be placed in your
- startup folder so it will start automatically whenever OS/2 starts.</P
-><P
-> The directory you choose to install <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- into will contain all of the configuration files.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-MAC"
->2.1.6. Mac OS X</A
-></H3
-><P
-> Unzip the downloaded file (you can either double-click on the zip file
- icon from the Finder, or from the desktop if you downloaded it there).
- Then, double-click on the package installer icon and follow the
- installation process.</P
-><P
-> The privoxy service will automatically start after a successful
- installation (in addition to every time your computer starts up).  To
- prevent the privoxy service from automatically starting when your
- computer starts up, remove or rename the folder named
- <TT
-CLASS="LITERAL"
->/Library/StartupItems/Privoxy</TT
->. </P
-><P
-> To manually start or stop the privoxy service, use the Privoxy Utility
- for Mac OS X.  This application controls the privoxy service (e.g.
- starting and stopping the service as well as uninstalling the software).</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-AMIGA"
->2.1.7. AmigaOS</A
-></H3
-><P
-> Copy and then unpack the <TT
-CLASS="FILENAME"
->lha</TT
-> archive to a suitable location. 
- All necessary files will be installed into <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- directory, including all configuration and log files. To uninstall, just 
- remove this directory.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATION-TBZ"
->2.1.8. FreeBSD</A
-></H3
-><P
-> Privoxy is part of FreeBSD's Ports Collection, you can build and install
- it with <TT
-CLASS="LITERAL"
->cd /usr/ports/www/privoxy; make install clean</TT
->.</P
-><P
-> If you don't use the ports, you can fetch and install
- the package with <TT
-CLASS="LITERAL"
->pkg_add -r privoxy</TT
->.</P
-><P
-> The port skeleton and the package can also be downloaded from the
- <A
-HREF="https://sourceforge.net/project/showfiles.php?group_id=11118";
-TARGET="_top"
->File Release
- Page</A
->, but there's no reason to use them unless you're interested in the
- beta releases which are only available there.</P
-></DIV
-><DIV
-CLASS="SECT3"
-><H3
-CLASS="SECT3"
-><A
-NAME="INSTALLATTION-GENTOO"
->2.1.9. Gentoo</A
-></H3
-><P
-> Gentoo source packages (Ebuilds) for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> are 
- contained in the Gentoo  Portage Tree (they are not on the download page, 
- but there is a Gentoo section, where you can see when a new 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Version is added to the  Portage Tree).</P
-><P
-> Before installing <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> under Gentoo just do 
- first <TT
-CLASS="LITERAL"
->emerge --sync</TT
-> to get the latest changes from the 
- Portage tree. With <TT
-CLASS="LITERAL"
->emerge privoxy</TT
-> you install the latest 
- version.</P
-><P
-> Configuration files are in <TT
-CLASS="FILENAME"
->/etc/privoxy</TT
->, the 
- documentation is in <TT
-CLASS="FILENAME"
->/usr/share/doc/privoxy-3.0.12</TT
->
- and the Log directory is in <TT
-CLASS="FILENAME"
->/var/log/privoxy</TT
->.</P
-></DIV
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="INSTALLATION-SOURCE"
->2.2. Building from Source</A
-></H2
-><P
-> The most convenient way to obtain the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> sources
- is to download the source tarball from our 
- <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118&#38;package_id=10571";
-TARGET="_top"
->project download
- page</A
->.</P
-><P
-> If you like to live on the bleeding edge and are not afraid of using
- possibly unstable development versions, you can check out the up-to-the-minute
- version directly from <A
-HREF="http://sourceforge.net/cvs/?group_id=11118";
-TARGET="_top"
->the
- CVS repository</A
->. </P
-><P
-> To build <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> from source, 
- <A
-HREF="http://www.gnu.org/software/autoconf/autoconf.html";
-TARGET="_top"
->autoconf</A
->,
- <A
-HREF="http://www.gnu.org/software/make/make.html";
-TARGET="_top"
->GNU make
- (gmake)</A
->, and, of course, a C compiler like <A
-HREF="http://www.gnu.org/software/gcc/gcc.html";
-TARGET="_top"
->gcc</A
-> are required.</P
-><P
-> When building from a source tarball,
- first unpack the source: </P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> tar xzvf privoxy-3.0.12-stable-src.tar.gz
- cd privoxy-3.0.12-stable</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> For retrieving the current CVS sources, you'll need a CVS client installed.
- Note that sources from CVS are typically development quality, and may not be
- stable, or well tested. To download CVS source, check the Sourceforge
- documentation, which might give commands like:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  cvs -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa login
-  cvs -z3 -d:pserver:anonymous@xxxxxxxxxxxxxxxxxxxxxxxxxx:/cvsroot/ijbswa co current
-  cd current</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> This will create a directory named <TT
-CLASS="FILENAME"
->current/</TT
->, which will 
- contain the source tree.</P
-><P
-> You can also check out any <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- <SPAN
-CLASS="QUOTE"
->"branch"</SPAN
->, just exchange the <SPAN
-CLASS="APPLICATION"
->current</SPAN
->
- name with the wanted branch name (Example: v_3_0_branch for the 3.0 cvs
- tree).</P
-><P
-> It is also strongly recommended to not run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- as root. You should configure/install/run <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as
- an unprivileged user, preferably by  creating a <SPAN
-CLASS="QUOTE"
->"privoxy"</SPAN
-> user
- and group just for this purpose. See your local documentation for the correct
- command line to do add new users and groups (something like
- <B
-CLASS="COMMAND"
->adduser</B
->, but the command syntax may vary from platform
- to platform). </P
-><P
-> <TT
-CLASS="FILENAME"
->/etc/passwd</TT
-> might then look like:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> And then <TT
-CLASS="FILENAME"
->/etc/group</TT
->, like:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  privoxy:*:7777:</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Some binary packages may do this for you.</P
-><P
-> Then, to build from either unpacked tarball or CVS source:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> autoheader
- autoconf
- ./configure      # (--help to see options)
- make             # (the make from GNU, sometimes called gmake) 
- su               # Possibly required
- make -n install  # (to see where all the files will go)
- make -s install  # (to really install, -s to silence output)</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
->  Using GNU <B
-CLASS="COMMAND"
->make</B
->, you can have the first four steps
-  automatically done for you by just typing:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->  make</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
->  in the freshly downloaded or unpacked source directory.</P
-><P
-> To build an executable with security enhanced features so that 
- users cannot easily bypass the proxy (e.g. <SPAN
-CLASS="QUOTE"
->"Go There Anyway"</SPAN
->), or
- alter their own configurations, <B
-CLASS="COMMAND"
->configure</B
-> like this:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> ./configure  --disable-toggle  --disable-editor  --disable-force</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
->Then build as above. In Privoxy 3.0.7 and later, all of these options
-can also be disabled through the configuration file.</P
-><P
-> <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->WARNING:</I
-></SPAN
-> If installing as root, the install will fail
- unless a non-root user or group is specified, or a <TT
-CLASS="LITERAL"
->privoxy</TT
->
- user and group already exist on the system. If a non-root user is specified,
- and no group, then the installation will try to also use a group of the same name
- as <SPAN
-CLASS="QUOTE"
->"user"</SPAN
->. If a group is specified (and no user), then the
- support files will be installed as writable by that group, and owned by the
- user running the installation.</P
-><P
-> <B
-CLASS="COMMAND"
->configure</B
-> accepts <TT
-CLASS="LITERAL"
->--with-user</TT
-> and
- <TT
-CLASS="LITERAL"
->--with-group</TT
-> options for setting user and group ownership
- of the configuration files (which need to be writable by the daemon). The
- specified <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->user must already exist</I
-></SPAN
->. When starting
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, it must be run as this same user to
- insure write access to configuration and log files!</P
-><P
-> Alternately, you can specify <TT
-CLASS="LITERAL"
->user</TT
-> and <TT
-CLASS="LITERAL"
->group</TT
->
- on the <B
-CLASS="COMMAND"
->make</B
-> command line, but be sure both already exist:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> make -s install  USER=privoxy GROUP=privoxy</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> The default installation path for <B
-CLASS="COMMAND"
->make install</B
-> is 
- <TT
-CLASS="FILENAME"
->/usr/local</TT
->. This may of course be customized with 
- the various <B
-CLASS="COMMAND"
->./configure</B
-> path options. If you are doing 
- an install to anywhere besides <TT
-CLASS="FILENAME"
->/usr/local</TT
->, be
- sure to set the appropriate paths with the correct configure options
- (<B
-CLASS="COMMAND"
->./configure --help</B
->). Non-privileged users must of course
- have write access permissions to wherever the target installation is going.</P
-><P
-> If you do install to <TT
-CLASS="FILENAME"
->/usr/local</TT
->, the install will use
- <TT
-CLASS="LITERAL"
->sysconfdir=$prefix/etc/privoxy</TT
-> by default. All other
- destinations, and the direct usage of <TT
-CLASS="LITERAL"
->--sysconfdir</TT
-> flag
- behave like normal, i.e. will not add the extra <TT
-CLASS="FILENAME"
->privoxy</TT
->
- directory. This is for a safer install, as there may already exist another
- program that uses a file with the <SPAN
-CLASS="QUOTE"
->"config"</SPAN
-> name, and thus makes
- <TT
-CLASS="FILENAME"
->/usr/local/etc</TT
-> cleaner.</P
-><P
-> If installing to <TT
-CLASS="FILENAME"
->/usr/local</TT
->, the documentation will go
- by default to <TT
-CLASS="FILENAME"
->$prefix/share/doc</TT
->. But if this directory
- doesn't exist, it will then try <TT
-CLASS="FILENAME"
->$prefix/doc</TT
-> and install
- there before creating a new <TT
-CLASS="FILENAME"
->$prefix/share/doc</TT
-> just for
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.</P
-><P
-> Again, if the installs goes to <TT
-CLASS="FILENAME"
->/usr/local</TT
->, the
- <TT
-CLASS="LITERAL"
->localstatedir</TT
-> (ie: <TT
-CLASS="FILENAME"
->var/</TT
->) will default
- to <TT
-CLASS="FILENAME"
->/var</TT
-> instead of <TT
-CLASS="LITERAL"
->$prefix/var</TT
-> so
- the logs will go to <TT
-CLASS="FILENAME"
->/var/log/privoxy/</TT
->, and the pid file
- will be created in <TT
-CLASS="FILENAME"
->/var/run/privoxy.pid</TT
->. </P
-><P
-> <B
-CLASS="COMMAND"
->make install</B
-> will attempt to set the correct values 
- in <TT
-CLASS="FILENAME"
->config</TT
-> (main configuration file). You should  
- check this to make sure all values are correct. If appropriate,
- an init script will be installed, but it is up to the user to determine 
- how and where to start <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. The init 
- script should be checked for correct paths and values, if anything other than
- a default install is done.</P
-><P
-> If install finds previous versions of local configuration files, most of
- these will not be overwritten, and the new ones will be installed with a
- <SPAN
-CLASS="QUOTE"
->"new"</SPAN
-> extension. default.action and default.filter
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->will be overwritten</I
-></SPAN
->. You will then need
- to manually update the other installed configuration files as needed. The
- default template files <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->will</I
-></SPAN
-> be overwritten. If you have
- customized, local templates, these should be stored safely in a separate
- directory and defined in <TT
-CLASS="FILENAME"
->config</TT
-> by the
- <SPAN
-CLASS="QUOTE"
->"templdir"</SPAN
-> directive. It is of course wise to always back-up any
- important configuration files <SPAN
-CLASS="QUOTE"
->"just in case"</SPAN
->. If a previous
- version of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is already running, you will
- have to restart it manually.</P
-><P
-> For more detailed instructions on how to build Redhat RPMs,
- Windows self-extracting installers, building on platforms with
- special requirements etc, please consult the <A
-HREF="http://www.privoxy.org/developer-manual/newrelease.html";
-TARGET="_top"
->developer manual</A
->.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="INSTALLATION-KEEPUPDATED"
->2.3. Keeping your Installation Up-to-Date</A
-></H2
-><P
-> As user feedback comes in and development continues, we will make updated versions
- of both the main <A
-HREF="actions-file.html"
->actions file</A
-> (as a <A
-HREF="http://sourceforge.net/project/showfiles.php?group_id=11118&#38;release_id=103670";
-TARGET="_top"
->separate
- package</A
->) and the software itself (including the actions file) available for
- download.</P
-><P
-> If you wish to receive an email notification whenever we release updates of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> or the actions file, <A
-HREF="http://lists.sourceforge.net/lists/listinfo/ijbswa-announce/";
-TARGET="_top"
->subscribe
- to our announce  mailing list</A
->, ijbswa-announce@xxxxxxxxxxxxxxxxxxxxxx</P
-><P
-> In order not to lose your personal changes and adjustments when updating
- to the latest <TT
-CLASS="LITERAL"
->default.action</TT
-> file we <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->strongly
- recommend</I
-></SPAN
-> that you use <TT
-CLASS="LITERAL"
->user.action</TT
-> and 
- <TT
-CLASS="LITERAL"
->user.filter</TT
-> for your local
- customizations of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. See the <A
-HREF="actions-file.html"
->Chapter on actions files</A
-> for details.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="introduction.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="whatsnew.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Introduction</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->What's New in this Release</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/introduction.html b/external/privoxy/doc/webserver/user-manual/introduction.html
deleted file mode 100644
index aad9cc0..0000000
--- a/external/privoxy/doc/webserver/user-manual/introduction.html
+++ /dev/null
@@ -1,292 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Introduction</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="NEXT"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="installation.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="INTRODUCTION"
->1. Introduction</A
-></H1
-><P
-> This documentation is included with the current stable version of
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, v.3.0.12.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="FEATURES"
->1.1. Features</A
-></H2
-><P
-> In addition to the core 
- features of ad blocking and 
- <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookie</A
-> management,
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> provides many supplemental
- features, 
- that give the end-user more control, more privacy and more freedom:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->     Can keep outgoing connections alive and reuse them later on.
-  </P
-></LI
-><LI
-><P
->     Supports tagging which allows to change the behaviour
-     based on client and server headers.
-  </P
-></LI
-><LI
-><P
->     Can be run as an "intercepting" proxy, which obviates the need to
-     configure browsers individually.
-  </P
-></LI
-><LI
-><P
->     Sophisticated actions and filters for manipulating both server and client
-     headers. 
-   </P
-></LI
-><LI
-><P
->     Can be chained with other proxies.
-  </P
-></LI
-><LI
-><P
->   Integrated browser based configuration and control utility at <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
-   (shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->). Browser-based
-   tracing of rule and filter effects. Remote toggling.
-  </P
-></LI
-><LI
-><P
->   Web page filtering (text replacements, removes banners based on size,
-   invisible <SPAN
-CLASS="QUOTE"
->"web-bugs"</SPAN
->, JavaScript and HTML annoyances, 
-   pop-up windows, etc.)
-  </P
-></LI
-><LI
-><P
->   Modularized configuration that allows for standard settings and
-   user settings to reside in separate files, so that installing updated
-   actions files won't overwrite individual user settings.
-  </P
-></LI
-><LI
-><P
->   Support for Perl Compatible Regular Expressions in the configuration files, and 
-   a more sophisticated and flexible configuration syntax.
-  </P
-></LI
-><LI
-><P
->   Improved cookie management features (e.g. session based cookies).
-  </P
-></LI
-><LI
-><P
->   GIF de-animation. 
-  </P
-></LI
-><LI
-><P
->   Bypass many click-tracking scripts (avoids script redirection).
-  </P
-></LI
-><LI
-><P
->   Multi-threaded (POSIX and native threads).
-  </P
-></LI
-><LI
-><P
->   User-customizable HTML templates for most proxy-generated pages (e.g. "blocked" page).
-  </P
-></LI
-><LI
-><P
->   Auto-detection and re-reading of config file changes.
-  </P
-></LI
-><LI
-><P
->   Improved signal handling, and a true daemon mode (Unix).
-  </P
-></LI
-><LI
-><P
->   Every feature now controllable on a per-site or per-location basis, configuration
-   more powerful and versatile over-all.
-  </P
-></LI
-><LI
-><P
->   Many smaller new features added, limitations and bugs removed.
-  </P
-></LI
-></UL
-></P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy 3.0.12 User Manual</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Installation</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/proxy2.jpg b/external/privoxy/doc/webserver/user-manual/proxy2.jpg
deleted file mode 100644
index e6c50dc..0000000
Binary files a/external/privoxy/doc/webserver/user-manual/proxy2.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/user-manual/proxy_setup.jpg b/external/privoxy/doc/webserver/user-manual/proxy_setup.jpg
deleted file mode 100644
index 9e80f97..0000000
Binary files a/external/privoxy/doc/webserver/user-manual/proxy_setup.jpg and /dev/null differ
diff --git a/external/privoxy/doc/webserver/user-manual/quickstart.html b/external/privoxy/doc/webserver/user-manual/quickstart.html
deleted file mode 100644
index 0393689..0000000
--- a/external/privoxy/doc/webserver/user-manual/quickstart.html
+++ /dev/null
@@ -1,943 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Quickstart to Using Privoxy</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="What's New in this Release"
-HREF="whatsnew.html"><LINK
-REL="NEXT"
-TITLE="Starting Privoxy"
-HREF="startup.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="whatsnew.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="startup.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="QUICKSTART"
->4. Quickstart to Using Privoxy</A
-></H1
-><P
-> <P
-></P
-><UL
-><LI
-><P
->  Install <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. See the <A
-HREF="installation.html"
->Installation Section</A
-> below for platform specific
-  information. 
- </P
-></LI
-><LI
-><P
->   Advanced users and those who want to offer <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-   service to more than just their local machine should check the <A
-HREF="config.html"
->main config file</A
->, especially the <A
-HREF="config.html#ACCESS-CONTROL"
->security-relevant</A
-> options. These are 
-   off by default.
-  </P
-></LI
-><LI
-><P
->  Start <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->, if the installation program has
-  not done this already (may vary according to platform). See the section
-  <A
-HREF="startup.html"
->Starting <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-></A
->.
-  </P
-></LI
-><LI
-><P
->   Set your browser to use <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as HTTP and
-   HTTPS (SSL)  <A
-HREF="http://en.wikipedia.org/wiki/Proxy_server";
-TARGET="_top"
->proxy</A
->
-   by setting the proxy configuration for address of
-   <TT
-CLASS="LITERAL"
->127.0.0.1</TT
-> and port <TT
-CLASS="LITERAL"
->8118</TT
->.
-   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->DO NOT</I
-></SPAN
-> activate proxying for <TT
-CLASS="LITERAL"
->FTP</TT
-> or 
-   any protocols besides HTTP and HTTPS (SSL) unless you intend to prevent your
-   browser from using these protocols.
-  </P
-></LI
-><LI
-><P
->    Flush your browser's disk and memory caches, to remove any cached ad images.
-    If using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to manage 
-    <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
->,
-    you should remove any currently stored cookies too.
-  </P
-></LI
-><LI
-><P
->   A default installation should provide a reasonable starting point for 
-   most. There will undoubtedly be occasions where you will want to adjust the
-   configuration, but that can be dealt with as the need arises. Little 
-   to no initial configuration is required in most cases, you may want
-   to enable the
-   <A
-HREF="config.html#ENABLE-EDIT-ACTIONS"
-TARGET="_top"
->web-based action editor</A
-> though.
-   Be sure to read the warnings first.
-  </P
-><P
->   See the <A
-HREF="configuration.html"
->Configuration section</A
-> for more
-   configuration options, and how to customize your installation.
-   You might also want to look at the <A
-HREF="quickstart.html#QUICKSTART-AD-BLOCKING"
->next section</A
-> for a quick
-   introduction to how <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> blocks ads and
-   banners.</P
-></LI
-><LI
-><P
->    If you experience ads that slip through, innocent images that are
-    blocked, or otherwise feel the need to fine-tune
-    <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> behavior, take a look at the <A
-HREF="actions-file.html"
->actions files</A
->. As a quick start, you might
-    find the <A
-HREF="actions-file.html#ACT-EXAMPLES"
->richly commented examples</A
->
-    helpful. You can also view and edit the actions files through the <A
-HREF="http://config.privoxy.org";
-TARGET="_top"
->web-based user interface</A
->. The
-    Appendix <SPAN
-CLASS="QUOTE"
->"<A
-HREF="appendix.html#ACTIONSANAT"
->Troubleshooting: Anatomy of an
-    Action</A
->"</SPAN
-> has hints on how to understand and debug actions that
-    <SPAN
-CLASS="QUOTE"
->"misbehave"</SPAN
->.
-  </P
-></LI
-><LI
-><P
->   Please see the section <A
-HREF="contact.html"
->Contacting the
-   Developers</A
-> on how to report bugs, problems with websites or to get
-   help. 
-  </P
-></LI
-><LI
-><P
->   Now enjoy surfing with enhanced control, comfort and privacy!
-  </P
-></LI
-></UL
-></P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="QUICKSTART-AD-BLOCKING"
->4.1. Quickstart to Ad Blocking</A
-></H2
-><P
-> Ad blocking is but one of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
- array of features. Many of these features are for the technically minded advanced 
- user. But, ad and banner blocking is surely common ground for everybody.</P
-><P
-> 
- This section will provide a quick summary of ad blocking so 
- you can get up to speed quickly without having to read the more extensive
- information provided below, though this is highly recommended.</P
-><P
-> First a bit of a warning ... blocking ads is much like blocking SPAM: the
- more aggressive you are about it, the more likely you are to block 
- things that were not intended. And the more likely that some things 
- may not work as intended. So there is a trade off here. If you want
- extreme ad free browsing, be prepared to deal with more
- <SPAN
-CLASS="QUOTE"
->"problem"</SPAN
-> sites, and to spend more time adjusting the
- configuration to solve these unintended consequences. In short, there is 
- not an easy way to eliminate <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->all</I
-></SPAN
-> ads. Either take 
- the easy way and settle for <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->most</I
-></SPAN
-> ads blocked with the
- default configuration, or jump in and tweak it for your personal surfing
- habits and preferences.</P
-><P
-> Secondly, a brief explanation of <SPAN
-CLASS="APPLICATION"
->Privoxy's </SPAN
->
- <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
->. <SPAN
-CLASS="QUOTE"
->"Actions"</SPAN
-> in this context, are 
- the directives we use to tell <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to perform
- some task relating to HTTP transactions (i.e. web browsing). We tell
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to take some <SPAN
-CLASS="QUOTE"
->"action"</SPAN
->. Each
- action has a unique name and function. While there are many potential
- <SPAN
-CLASS="APPLICATION"
->actions</SPAN
-> in <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
->
- arsenal, only a few are used for ad blocking. <A
-HREF="actions-file.html#ACTIONS"
->Actions</A
->, and <A
-HREF="actions-file.html"
->action
- configuration files</A
->, are explained in depth below.</P
-><P
-> Actions are specified in <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> configuration,
- followed by one or more URLs to which the action should apply. URLs 
- can actually be URL type <A
-HREF="actions-file.html#AF-PATTERNS"
->patterns</A
-> that use
- wildcards so they can apply potentially to a range of similar URLs. The
- actions, together with the URL patterns are called a section.</P
-><P
-> When you connect to a website, the full URL will either match one or more
- of the sections as defined in <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> configuration,
- or not. If so, then <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will perform the
- respective actions. If not, then nothing special happens. Furthermore, web
- pages may contain embedded, secondary URLs that your web browser will
- use to load additional components of the page, as it parses the
- original page's HTML content. An ad image for instance, is just an URL
- embedded in the page somewhere. The image itself may be on the same server,
- or a server somewhere else on the Internet. Complex web pages will have many
- such embedded URLs. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can deal with each URL individually, so, for
- instance, the main page text is not touched, but images from such-and-such
- server are blocked.</P
-><P
-> The most important actions for basic ad blocking are:  <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
->, <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
->, 
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT"
->handle-as-empty-document</A
-></TT
->,and
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></TT
->:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> - this is perhaps 
-   the single most used action, and is particularly important for ad blocking.
-   This action stops any contact between your browser and any URL patterns
-   that match this action's configuration. It can be used for blocking ads,
-   but also anything that is determined to be unwanted. By itself, it simply
-   stops any communication with the remote server and sends
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s own built-in BLOCKED page instead to
-   let you now what has happened (with some exceptions, see below).
-  </P
-></LI
-><LI
-><P
->   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
-> - 
-   tells <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to treat this URL as an image.
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->'s default configuration already does this
-   for all common image types (e.g. GIF), but there are many situations where this
-   is not so easy to determine. So we'll force it in these cases. This is particularly
-   important for ad blocking, since  only if we know that it's an image of
-   some kind, can we replace it with an image of our choosing, instead of the 
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> BLOCKED page (which would only result in
-   a <SPAN
-CLASS="QUOTE"
->"broken image"</SPAN
-> icon). There are some limitations to this
-   though. For instance, you can't just brute-force an image substitution for
-   an entire HTML page in most situations.
-  </P
-></LI
-><LI
-><P
->   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-EMPTY-DOCUMENT"
->handle-as-empty-document</A
-></TT
-> - 
-   sends an empty document instead of <SPAN
-CLASS="APPLICATION"
->Privoxy's</SPAN
-> 
-   normal BLOCKED HTML page. This is useful for file types that are neither 
-   HTML nor images, such as blocking JavaScript files.
-  </P
-></LI
-><LI
-><P
->   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#SET-IMAGE-BLOCKER"
->set-image-blocker</A
-></TT
-> - tells
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> what to display in place of an ad image that
-   has hit a block rule. For this to come into play, the URL must match a
-   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> action somewhere in the
-   configuration, <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->and</I
-></SPAN
->, it must also match an
-   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#HANDLE-AS-IMAGE"
->handle-as-image</A
-></TT
-> action.
-  </P
-><P
->   The configuration options on what to display instead of the ad are:
-  </P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->       <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->pattern</I
-></SPAN
-> - a checkerboard pattern, so that an ad 
-    replacement is obvious. This is the default.
-   </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->       <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->blank</I
-></SPAN
-> - A very small empty GIF image is displayed.
-    This is the so-called <SPAN
-CLASS="QUOTE"
->"invisible"</SPAN
-> configuration option.
-   </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-><P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->       <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->http://&#60;URL&#62;</I
-></SPAN
-> - A redirect to any image anywhere
-    of the user's choosing (advanced usage).
-   </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
-></LI
-></UL
-></P
-><P
-> Advanced users will eventually want to explore <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#FILTER"
->filters</A
-></TT
-> as well. Filters 
- are very different from <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->blocks</A
-></TT
->.
- A <SPAN
-CLASS="QUOTE"
->"block"</SPAN
-> blocks a site, page, or unwanted contented. Filters
- are a way of filtering or modifying what is actually on the page. An example
- filter usage: a text replacement of <SPAN
-CLASS="QUOTE"
->"no-no"</SPAN
-> for
- <SPAN
-CLASS="QUOTE"
->"nasty-word"</SPAN
->. That is a very simple example. This process can be
- used for ad blocking, but it is more in the realm of advanced usage and has
- some pitfalls to be wary off.</P
-><P
-> The quickest way to adjust any of these settings is with your browser through
- the special <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> editor at <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->
- (shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/show-status</A
->). This 
- is an internal page, and does not require Internet access.</P
-><P
-> Note that as of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> 3.0.7 beta the
- action editor is disabled by default. Check the
- <A
-HREF="config.html#ENABLE-EDIT-ACTIONS"
-TARGET="_top"
->enable-edit-actions
-  section in the configuration file</A
-> to learn why and in which
- cases it's safe to enable again.</P
-><P
-> If you decided to enable the action editor, select the appropriate
- <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
-> file, and click
- <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
->"</SPAN
->. It is best to put personal or
- local preferences in <TT
-CLASS="FILENAME"
->user.action</TT
-> since this is not
- meant to be overwritten during upgrades, and will over-ride the settings in
- other files. Here you can insert new <SPAN
-CLASS="QUOTE"
->"actions"</SPAN
->, and URLs for ad
- blocking or other purposes, and make other adjustments to the configuration.
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will detect these changes automatically.</P
-><P
-> A quick and simple step by step example:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->     Right click on the ad image to be blocked, then select 
-     <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIMENUITEM"
->Copy Link Location</SPAN
->"</SPAN
-> from the
-     pop-up menu. 
-   </P
-></LI
-><LI
-><P
->    Set your browser to 
-    <A
-HREF="http://config.privoxy.org/show-status";
-TARGET="_top"
->http://config.privoxy.org/show-status</A
->
-   </P
-></LI
-><LI
-><P
->    Find <TT
-CLASS="FILENAME"
->user.action</TT
-> in the top section, and click 
-    on <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
->"</SPAN
->:
-   </P
-><P
->  <DIV
-CLASS="FIGURE"
-><A
-NAME="AEN530"
-></A
-><P
-><B
->Figure 1. Actions Files in Use</B
-></P
-><DIV
-CLASS="MEDIAOBJECT"
-><P
-><IMG
-SRC="files-in-use.jpg"></P
-></DIV
-></DIV
->
- </P
-></LI
-><LI
-><P
->   You should have a section with only
-   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> listed under 
-   <SPAN
-CLASS="QUOTE"
->"Actions:"</SPAN
->.
-   If not, click a <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Insert new section below</SPAN
->"</SPAN
->
-   button, and in the new section that just appeared, click the 
-   <SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
-> button right under the word <SPAN
-CLASS="QUOTE"
->"Actions:"</SPAN
->.
-   This will bring up a list of all actions. Find
-   <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> near the top, and click
-   in the <SPAN
-CLASS="QUOTE"
->"Enabled"</SPAN
-> column, then <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Submit</SPAN
->"</SPAN
->
-   just below the list.
-  </P
-></LI
-><LI
-><P
->   Now, in the <TT
-CLASS="LITERAL"
-><A
-HREF="actions-file.html#BLOCK"
->block</A
-></TT
-> actions section,
-   click the <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Add</SPAN
->"</SPAN
-> button, and paste the URL the
-   browser got from <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIMENUITEM"
->Copy Link Location</SPAN
->"</SPAN
->.
-   Remove the <TT
-CLASS="LITERAL"
->http://</TT
-> at the beginning of the URL. Then, click
-   <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->Submit</SPAN
->"</SPAN
-> (or
-   <SPAN
-CLASS="QUOTE"
->"<SPAN
-CLASS="GUIBUTTON"
->OK</SPAN
->"</SPAN
-> if in a pop-up window).
-  </P
-></LI
-><LI
-><P
->   Now go back to the original page, and press <B
-CLASS="KEYCAP"
->SHIFT-Reload</B
->
-   (or flush all browser caches). The image should be gone now.
-  </P
-></LI
-></UL
-></P
-><P
-> This is a very crude and simple example. There might be good reasons to use a 
- wildcard pattern match to include potentially similar images from the same
- site. For a more extensive explanation of <SPAN
-CLASS="QUOTE"
->"patterns"</SPAN
->, and 
- the entire actions concept, see <A
-HREF="actions-file.html"
->the Actions
- section</A
->.</P
-><P
-> For advanced users who want to hand edit their config files, you might want
- to now go to the <A
-HREF="actions-file.html#ACT-EXAMPLES"
->Actions Files Tutorial</A
->.
- The ideas explained therein also apply to the web-based editor.</P
-><P
-> There are also various 
- <A
-HREF="actions-file.html#FILTER"
->filters</A
-> that can be used for ad blocking 
- (filters are a special subset of actions). These 
- fall into the <SPAN
-CLASS="QUOTE"
->"advanced"</SPAN
-> usage category, and are explained in
- depth in later sections. </P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="whatsnew.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="startup.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->What's New in this Release</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Starting Privoxy</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/seealso.html b/external/privoxy/doc/webserver/user-manual/seealso.html
deleted file mode 100644
index 93a8b2d..0000000
--- a/external/privoxy/doc/webserver/user-manual/seealso.html
+++ /dev/null
@@ -1,418 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->See Also</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Privoxy Copyright, License and History"
-HREF="copyright.html"><LINK
-REL="NEXT"
-TITLE="Appendix"
-HREF="appendix.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="copyright.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="appendix.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="SEEALSO"
->13. See Also</A
-></H1
-><P
-> Other references and sites of interest to <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- users:</P
-><P
-> <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/";
-TARGET="_top"
->http://www.privoxy.org/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Home page. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/faq/";
-TARGET="_top"
->http://www.privoxy.org/faq/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> FAQ. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.privoxy.org/developer-manual/";
-TARGET="_top"
->http://www.privoxy.org/developer-manual/</A
->, 
-   the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> developer manual. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://sourceforge.net/projects/ijbswa/";
-TARGET="_top"
->https://sourceforge.net/projects/ijbswa/</A
->, 
-   the Project Page for <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> on 
-   <A
-HREF="http://sourceforge.net";
-TARGET="_top"
->SourceForge</A
->.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->,
-   the web-based user interface. <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> must be
-   running for this to work. Shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://sourceforge.net/tracker/?group_id=11118&#38;atid=460288";
-TARGET="_top"
->https://sourceforge.net/tracker/?group_id=11118&#38;atid=460288</A
->, to submit <SPAN
-CLASS="QUOTE"
->"misses"</SPAN
-> and other
-   configuration related suggestions to the developers. 
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- 
- 
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.junkbusters.com/ht/en/cookies.html";
-TARGET="_top"
->http://www.junkbusters.com/ht/en/cookies.html</A
->,
-   an explanation how cookies are used to track web users.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.junkbusters.com/ijb.html";
-TARGET="_top"
->http://www.junkbusters.com/ijb.html</A
->,
-   the original Internet Junkbuster.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.squid-cache.org/";
-TARGET="_top"
->http://www.squid-cache.org/</A
->, a popular
-   caching proxy, which is often used together with <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="http://www.pps.jussieu.fr/~jch/software/polipo/";
-TARGET="_top"
->http://www.pps.jussieu.fr/~jch/software/polipo/</A
->,
-   <SPAN
-CLASS="APPLICATION"
->Polipo</SPAN
-> is a caching proxy with advanced features
-   like pipelining, multiplexing and caching of partial instances. In many setups
-   it can be used as <SPAN
-CLASS="APPLICATION"
->Squid</SPAN
-> replacement.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- <P
-></P
-><TABLE
-BORDER="0"
-><TBODY
-><TR
-><TD
->   <A
-HREF="https://www.torproject.org/";
-TARGET="_top"
->https://www.torproject.org/</A
->, 
-   <SPAN
-CLASS="APPLICATION"
->Tor</SPAN
-> can help anonymize web browsing, 
-   web publishing, instant messaging, IRC, SSH, and other applications.
-  </TD
-></TR
-></TBODY
-></TABLE
-><P
-></P
->
- </P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="copyright.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="appendix.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Privoxy Copyright, License and History</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Appendix</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/startup.html b/external/privoxy/doc/webserver/user-manual/startup.html
deleted file mode 100644
index e4f0c23..0000000
--- a/external/privoxy/doc/webserver/user-manual/startup.html
+++ /dev/null
@@ -1,902 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Starting Privoxy</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Quickstart to Using Privoxy"
-HREF="quickstart.html"><LINK
-REL="NEXT"
-TITLE="Privoxy Configuration"
-HREF="configuration.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="quickstart.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="configuration.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="STARTUP"
->5. Starting Privoxy</A
-></H1
-><P
-> Before launching <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> for the first time, you
- will want to configure your browser(s) to use
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as a HTTP and HTTPS (SSL) 
- <A
-HREF="http://en.wikipedia.org/wiki/Proxy_server";
-TARGET="_top"
->proxy</A
->. The default is
- 127.0.0.1 (or localhost) for the proxy address, and port 8118 (earlier versions
- used port 8000). This is the one configuration step <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->that must be done</I
-></SPAN
->!</P
-><P
-> Please note that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can only proxy HTTP and 
- HTTPS traffic. It will not work with FTP or other protocols.</P
-><P
->  <DIV
-CLASS="FIGURE"
-><A
-NAME="AEN585"
-></A
-><P
-><B
->Figure 2. Proxy Configuration Showing
-  Mozilla/Netscape HTTP and HTTPS (SSL) Settings</B
-></P
-><DIV
-CLASS="MEDIAOBJECT"
-><P
-><IMG
-SRC="proxy_setup.jpg"></P
-></DIV
-></DIV
->
- </P
-><P
-> 
- With <SPAN
-CLASS="APPLICATION"
->Firefox</SPAN
->, this is typically set under:</P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Tools</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Options</SPAN
->&nbsp;-&#62;&nbsp;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Advanced</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Network</SPAN
->&nbsp;-&#62;<SPAN
-CLASS="GUIBUTTON"
->Connection</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Settings</SPAN
-><br>&#13;</P
-><P
-> 
- Or optionally on some platforms:</P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Preferences</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->General</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Connection Settings</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Manual Proxy Configuration</SPAN
-><br>&#13;</P
-><P
-> 
- With <SPAN
-CLASS="APPLICATION"
->Netscape</SPAN
-> (and
- <SPAN
-CLASS="APPLICATION"
->Mozilla</SPAN
->), this can be set under:</P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Edit</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Preferences</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Advanced</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Proxies</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->HTTP Proxy</SPAN
-><br>&#13;</P
-><P
-> For <SPAN
-CLASS="APPLICATION"
->Internet Explorer v.5-7</SPAN
->: </P
-><P
-CLASS="LITERALLAYOUT"
->&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Tools</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Internet Options</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->Connections</SPAN
->&nbsp;-&#62;&nbsp;<SPAN
-CLASS="GUIBUTTON"
->LAN Settings</SPAN
-></P
-><P
-> Then, check <SPAN
-CLASS="QUOTE"
->"Use Proxy"</SPAN
-> and fill in the appropriate info
- (Address: 127.0.0.1, Port: 8118). Include HTTPS (SSL), if you want HTTPS
- proxy support too (sometimes labeled <SPAN
-CLASS="QUOTE"
->"Secure"</SPAN
->). Make sure any
- checkboxes like <SPAN
-CLASS="QUOTE"
->"Use the same proxy server for all protocols"</SPAN
-> is
- <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->UNCHECKED</I
-></SPAN
->. You want only HTTP and HTTPS (SSL)!</P
-><P
->  <DIV
-CLASS="FIGURE"
-><A
-NAME="AEN630"
-></A
-><P
-><B
->Figure 3. Proxy Configuration Showing
-  Internet Explorer HTTP and HTTPS (Secure) Settings</B
-></P
-><DIV
-CLASS="MEDIAOBJECT"
-><P
-><IMG
-SRC="proxy2.jpg"></P
-></DIV
-></DIV
->
- </P
-><P
-> After doing this, flush your browser's disk and memory caches to force a
- re-reading of all pages and to get rid of any ads that may be cached. Remove 
- any <A
-HREF="http://en.wikipedia.org/wiki/Browser_cookie";
-TARGET="_top"
->cookies</A
->,
- if you want <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to manage that. You are now
- ready to start enjoying the benefits of using
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->!</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> itself is typically started by specifying the
- main configuration file to be used on the command line. If no configuration
- file is specified on the command line, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- will look for a file named <TT
-CLASS="FILENAME"
->config</TT
-> in the current
- directory. Except on Win32 where it will try <TT
-CLASS="FILENAME"
->config.txt</TT
->.</P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-REDHAT"
->5.1. Red Hat and Fedora</A
-></H2
-><P
-> A default Red Hat installation may not start <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> upon boot. It will use
- the file <TT
-CLASS="FILENAME"
->/etc/privoxy/config</TT
-> as its main configuration
- file.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # /etc/rc.d/init.d/privoxy start</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Or ...</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # service privoxy start</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-DEBIAN"
->5.2. Debian</A
-></H2
-><P
-> We use a script. Note that Debian typically starts <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> upon booting per
- default.  It will use the file
- <TT
-CLASS="FILENAME"
->/etc/privoxy/config</TT
-> as its main configuration
- file.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # /etc/init.d/privoxy start</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-WINDOWS"
->5.3. Windows</A
-></H2
-><P
->Click on the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> Icon to start <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. If no configuration file is
- specified on the command line, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will look
- for a file named <TT
-CLASS="FILENAME"
->config.txt</TT
->. Note that Windows will
- automatically start <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> when the system starts if you chose that option
- when installing.</P
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> can run with full Windows service functionality.
- On Windows only, the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> program has two new command line arguments
- to install and uninstall <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> as a service. See the 
- <A
-HREF="installation.html#INSTALLATION-PACK-WIN"
->Windows Installation
- instructions</A
-> for details.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-UNICES"
->5.4. Solaris, NetBSD, FreeBSD, HP-UX and others</A
-></H2
-><P
->Example Unix startup command:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> # /usr/sbin/privoxy /etc/privoxy/config</PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-OS2"
->5.5. OS/2</A
-></H2
-><P
-> During installation, <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is configured to
- start automatically when the system restarts. You can start it manually by
- double-clicking on the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> icon in the
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> folder.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-MACOSX"
->5.6. Mac OS X</A
-></H2
-><P
->  After downloading the privoxy software, unzip the downloaded file by
-  double-clicking on the zip file icon.  Then, double-click on the
-  installer package icon and follow the installation process.</P
-><P
->  The privoxy service will automatically start after a successful
-  installation.  In addition, the privoxy service will automatically
-  start every time your computer starts up.</P
-><P
->  To prevent the privoxy service from automatically starting when your
-  computer starts up, remove or rename the folder named
-  /Library/StartupItems/Privoxy.</P
-><P
->  A simple application named Privoxy Utility has been created which
-  enables administrators to easily start and stop the privoxy service.</P
-><P
->  In addition, the Privoxy Utility presents a simple way for
-  administrators to edit the various privoxy config files.  A method
-  to uninstall the software is also available.</P
-><P
->  An administrator username and password must be supplied in order for
-  the Privoxy Utility to perform any of the tasks.</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-AMIGAOS"
->5.7. AmigaOS</A
-></H2
-><P
-> Start <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> (with RUN &#60;&#62;NIL:) in your
- <TT
-CLASS="FILENAME"
->startnet</TT
-> script (AmiTCP), in
- <TT
-CLASS="FILENAME"
->s:user-startup</TT
-> (RoadShow), as startup program in your
- startup script (Genesis), or as startup action (Miami and MiamiDx). 
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will automatically quit when you quit your
- TCP/IP stack (just ignore the harmless warning your TCP/IP stack may display that
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is still running).</P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="START-GENTOO"
->5.8. Gentoo</A
-></H2
-><P
-> A script is again used. It will use the file <TT
-CLASS="FILENAME"
->/etc/privoxy/config 
- </TT
-> as its main configuration file.</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> /etc/init.d/privoxy start
- </PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> Note that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is not automatically started at 
- boot time by default. You can change this with the <TT
-CLASS="LITERAL"
->rc-update</TT
-> 
- command.</P
-><P
-> 
- <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
-> rc-update add privoxy default
- </PRE
-></TD
-></TR
-></TABLE
-></P
-></DIV
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="CMDOPTIONS"
->5.9. Command Line Options</A
-></H2
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> may be invoked with the following
- command-line options:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--version</I
-></SPAN
->
-  </P
-><P
->     Print version info and exit. Unix only.
-  </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--help</I
-></SPAN
->
-  </P
-><P
->   Print short usage info and exit. Unix only.
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--no-daemon</I
-></SPAN
->
-  </P
-><P
->   Don't become a daemon, i.e. don't fork and become process group
-   leader, and don't detach from controlling tty. Unix only.
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--pidfile FILE</I
-></SPAN
->
-  </P
-><P
->   On startup, write the process ID to <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->FILE</I
-></SPAN
->. Delete the
-   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->FILE</I
-></SPAN
-> on exit. Failure to create or delete the
-   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->FILE</I
-></SPAN
-> is non-fatal. If no <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->FILE</I
-></SPAN
->
-   option is given, no PID file will be used. Unix only.
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--user USER[.GROUP]</I
-></SPAN
->
-  </P
-><P
->   After (optionally) writing the PID file, assume the user  ID  of
-   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->USER</I
-></SPAN
->, and if included the GID of GROUP.  Exit if the
-   privileges are not sufficient to do so. Unix only.
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--chroot</I
-></SPAN
->
-  </P
-><P
->   Before changing to the user ID given in the <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--user</I
-></SPAN
-> option, 
-   chroot to that user's home directory, i.e. make the kernel pretend to the <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-   process that the directory tree starts there. If set up carefully, this can limit 
-   the impact of possible vulnerabilities in <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to the files contained in that hierarchy.
-   Unix only.
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->--pre-chroot-nslookup hostname</I
-></SPAN
->
-  </P
-><P
->   Specifies a hostname to look up before doing a chroot. On some systems, initializing the
-   resolver library involves reading config files from /etc and/or loading additional shared
-   libraries from /lib. On these systems, doing a hostname lookup before the chroot reduces
-   the number of files that must be copied into the chroot tree.
-  </P
-><P
->   For fastest startup speed, a good value is a hostname that is not in /etc/hosts but that
-   your local name server (listed in /etc/resolv.conf) can resolve without recursion
-   (that is, without having to ask any other name servers). The hostname need not exist,
-   but if it doesn't, an error message (which can be ignored) will be output.
-  </P
-></LI
-><LI
-><P
->    <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->configfile</I
-></SPAN
->
-  </P
-><P
->    If no <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->configfile</I
-></SPAN
-> is included on the command line, 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will look for a file named 
-    <SPAN
-CLASS="QUOTE"
->"config"</SPAN
-> in the current directory (except on Win32 
-    where it will look for <SPAN
-CLASS="QUOTE"
->"config.txt"</SPAN
-> instead). Specify 
-    full path to avoid confusion. If no config file is found, 
-    <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> will fail to start.
-  </P
-></LI
-></UL
-></P
-><P
-> On <SPAN
-CLASS="APPLICATION"
->MS Windows</SPAN
-> only there are two additional 
- command-line options to allow <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> to install and 
- run as a <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->service</I
-></SPAN
->. See the 
-<A
-HREF="installation.html#INSTALLATION-PACK-WIN"
->Window Installation section</A
-> 
-for details.</P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="quickstart.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="configuration.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Quickstart to Using Privoxy</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Privoxy Configuration</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/templates.html b/external/privoxy/doc/webserver/user-manual/templates.html
deleted file mode 100644
index 7e31c75..0000000
--- a/external/privoxy/doc/webserver/user-manual/templates.html
+++ /dev/null
@@ -1,321 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->Privoxy's Template Files</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Filter Files"
-HREF="filter-file.html"><LINK
-REL="NEXT"
-TITLE="Contacting the Developers, Bug Reporting and Feature
-Requests"
-HREF="contact.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="filter-file.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="contact.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="TEMPLATES"
->10. Privoxy's Template Files</A
-></H1
-><P
-> All <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> built-in pages, i.e. error pages such as the 
- <A
-HREF="http://show-the-404-error.page";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"404 - No Such Domain"</SPAN
->
- error page</A
->, the <A
-HREF="http://ads.bannerserver.example.com/nasty-ads/sponsor.html";
-TARGET="_top"
-><SPAN
-CLASS="QUOTE"
->"BLOCKED"</SPAN
->
- page</A
->
- and all pages of its <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->web-based
- user interface</A
->, are generated from <SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->templates</I
-></SPAN
->. 
- (<SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> must be running for the above links to work as
- intended.)</P
-><P
-> These templates are stored in a subdirectory of the <A
-HREF="config.html#CONFDIR"
->configuration
- directory</A
-> called <TT
-CLASS="FILENAME"
->templates</TT
->. On Unixish platforms,
- this is typically
- <A
-HREF="file:///etc/privoxy/templates/"
-TARGET="_top"
-><TT
-CLASS="FILENAME"
->/etc/privoxy/templates/</TT
-></A
->.</P
-><P
-> The templates are basically normal HTML files, but with place-holders (called symbols
- or exports), which <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> fills at run time. It
- is possible to edit the templates with a normal text editor, should you want
- to customize them. (<SPAN
-CLASS="emphasis"
-><I
-CLASS="EMPHASIS"
->Not recommended for the casual
- user</I
-></SPAN
->). Should you create your own custom templates, you should use 
- the <TT
-CLASS="FILENAME"
->config</TT
-> setting <A
-HREF="config.html#TEMPLDIR"
->templdir</A
->
- to specify an alternate location, so your templates do not get overwritten
- during upgrades. 
- </P
-><P
-> Note that just like in configuration files, lines starting
- with <TT
-CLASS="LITERAL"
->#</TT
-> are ignored when the templates are filled in.</P
-><P
-> The place-holders are of the form <TT
-CLASS="LITERAL"
->@name@</TT
->, and you will
- find a list of available symbols, which vary from template to template,
- in the comments at the start of each file. Note that these comments are not
- always accurate, and that it's probably best to look at the existing HTML
- code to find out which symbols are supported and what they are filled in with.</P
-><P
-> A special application of this substitution mechanism is to make whole
- blocks of HTML code disappear when a specific symbol is set. We use this
- for many purposes, one of them being to include the beta warning in all
- our user interface (CGI) pages when <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- is in an alpha or beta development stage:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#60;!-- @if-unstable-start --&#62;
-
-  ... beta warning HTML code goes here ...
-
-&#60;!-- if-unstable-end@ --&#62;</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> If the "unstable" symbol is set, everything in between and including
- <TT
-CLASS="LITERAL"
->@if-unstable-start</TT
-> and <TT
-CLASS="LITERAL"
->if-unstable-end@</TT
->
- will disappear, leaving nothing but an empty comment:</P
-><P
-> <TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="100%"
-><TR
-><TD
-><PRE
-CLASS="SCREEN"
->&#60;!--  --&#62;</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
-> There's also an if-then-else construct and an <TT
-CLASS="LITERAL"
->#include</TT
->
- mechanism, but you'll sure find out if you are inclined to edit the
- templates ;-)</P
-><P
-> All templates refer to a style located at
- <A
-HREF="http://config.privoxy.org/send-stylesheet";
-TARGET="_top"
-><TT
-CLASS="LITERAL"
->http://config.privoxy.org/send-stylesheet</TT
-></A
->.
- This is, of course, locally served by <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
- and the source for it can be found and edited in the
- <TT
-CLASS="FILENAME"
->cgi-style.css</TT
-> template.</P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="filter-file.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="contact.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Filter Files</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Contacting the Developers, Bug Reporting and Feature
-Requests</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/upgradersnote.html b/external/privoxy/doc/webserver/user-manual/upgradersnote.html
deleted file mode 100644
index 36be7bc..0000000
--- a/external/privoxy/doc/webserver/user-manual/upgradersnote.html
+++ /dev/null
@@ -1,296 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<HTML
-><HEAD
-><TITLE
->Note to Upgraders</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.7"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.3 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="NEXT"
-TITLE="Quickstart to Using Privoxy"
-HREF="quickstart.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"></HEAD
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.3 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="quickstart.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="UPGRADERSNOTE"
->3. Note to Upgraders</A
-></H1
-><P
-> There are very significant changes from earlier 
- <SPAN
-CLASS="APPLICATION"
->Junkbuster</SPAN
-> versions to the current
- <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->. The number, names, syntax, and
- purposes of configuration files have substantially  changed.
- <SPAN
-CLASS="APPLICATION"
->Junkbuster 2.0.x</SPAN
-> configuration
- files will not migrate, <SPAN
-CLASS="APPLICATION"
->Junkbuster 2.9.x</SPAN
->
- and <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> configurations will need to be
- ported. The functionalities of the old <TT
-CLASS="FILENAME"
->blockfile</TT
->,
- <TT
-CLASS="FILENAME"
->cookiefile</TT
-> and <TT
-CLASS="FILENAME"
->imagelist</TT
-> 
- are now combined into the <A
-HREF="actions-file.html"
-><SPAN
-CLASS="QUOTE"
->"actions
- files"</SPAN
-></A
->.  
- <TT
-CLASS="FILENAME"
->default.action</TT
->, is the main actions file. Local
- exceptions should best be put into <TT
-CLASS="FILENAME"
->user.action</TT
->.</P
-><P
-> A <A
-HREF="filter-file.html"
-><SPAN
-CLASS="QUOTE"
->"filter file"</SPAN
-></A
-> (typically
- <TT
-CLASS="FILENAME"
->default.filter</TT
->) is new as of <SPAN
-CLASS="APPLICATION"
->Privoxy
- 2.9.x</SPAN
->, and provides some of the new sophistication (explained
- below). <TT
-CLASS="FILENAME"
->config</TT
-> is much the same as before.</P
-><P
-> If upgrading from a 2.0.x version, you will have to use the new config 
- files, and possibly adapt any personal rules from your older files.
- When porting personal rules over from the old <TT
-CLASS="FILENAME"
->blockfile</TT
->
- to the new actions files, please note that even the pattern syntax has
- changed. If upgrading from 2.9.x development versions, it is still
- recommended to use the new configuration files.</P
-><P
-> A quick list of things to be aware of before upgrading: </P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->   The default listening port is now 8118 due to a conflict with another 
-   service (NAS).
-  </P
-></LI
-><LI
-><P
->  
-    Some installers may remove earlier versions completely. Save any 
-    important configuration files!
-  </P
-></LI
-><LI
-><P
->   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is controllable with a web browser 
-   at the special URL: <A
-HREF="http://config.privoxy.org/";
-TARGET="_top"
->http://config.privoxy.org/</A
->
-   (Shortcut: <A
-HREF="http://p.p/";
-TARGET="_top"
->http://p.p/</A
->). Many
-   aspects of configuration can be done here, including temporarily disabling
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->.
-  </P
-></LI
-><LI
-><P
->   The primary configuration files for cookie management, ad and banner 
-   blocking, and many other aspects of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-   configuration are the <A
-HREF="actions-file.html"
->actions
-   files</A
->. It is strongly recommended to become familiar with the new
-   actions concept below, before modifying these files. Locally defined rules 
-   should go into <TT
-CLASS="FILENAME"
->user.action</TT
->.
-  </P
-></LI
-><LI
-><P
->   
-   Some installers may not automatically start
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> after installation.
-  </P
-></LI
-></UL
-></P
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="quickstart.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Installation</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Quickstart to Using <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-></TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/doc/webserver/user-manual/whatsnew.html b/external/privoxy/doc/webserver/user-manual/whatsnew.html
deleted file mode 100644
index 5d7c0b2..0000000
--- a/external/privoxy/doc/webserver/user-manual/whatsnew.html
+++ /dev/null
@@ -1,351 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN""http://www.w3.org/TR/html4/loose.dtd";>
-<HTML
-><HEAD
-><TITLE
->What's New in this Release</TITLE
-><META
-NAME="GENERATOR"
-CONTENT="Modular DocBook HTML Stylesheet Version 1.79"><LINK
-REL="HOME"
-TITLE="Privoxy 3.0.12 User Manual"
-HREF="index.html"><LINK
-REL="PREVIOUS"
-TITLE="Installation"
-HREF="installation.html"><LINK
-REL="NEXT"
-TITLE="Quickstart to Using Privoxy"
-HREF="quickstart.html"><LINK
-REL="STYLESHEET"
-TYPE="text/css"
-HREF="../p_doc.css"><META
-HTTP-EQUIV="Content-Type"
-CONTENT="text/html;
-charset=ISO-8859-1">
-<LINK REL="STYLESHEET" TYPE="text/css" HREF="p_doc.css">
-</head
-><BODY
-CLASS="SECT1"
-BGCOLOR="#EEEEEE"
-TEXT="#000000"
-LINK="#0000FF"
-VLINK="#840084"
-ALINK="#0000FF"
-><DIV
-CLASS="NAVHEADER"
-><TABLE
-SUMMARY="Header navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TH
-COLSPAN="3"
-ALIGN="center"
->Privoxy 3.0.12 User Manual</TH
-></TR
-><TR
-><TD
-WIDTH="10%"
-ALIGN="left"
-VALIGN="bottom"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="80%"
-ALIGN="center"
-VALIGN="bottom"
-></TD
-><TD
-WIDTH="10%"
-ALIGN="right"
-VALIGN="bottom"
-><A
-HREF="quickstart.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-></TABLE
-><HR
-ALIGN="LEFT"
-WIDTH="100%"></DIV
-><DIV
-CLASS="SECT1"
-><H1
-CLASS="SECT1"
-><A
-NAME="WHATSNEW"
->3. What's New in this Release</A
-></H1
-><P
-> <SPAN
-CLASS="APPLICATION"
->Privoxy 3.0.12</SPAN
-> is mainly a bugfix release:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->    The socket-timeout option now also works on platforms whose
-    select() implementation modifies the timeout structure.
-    Previously the timeout was triggered even if the connection
-    didn't stall. Reported by cyberpatrol.
-   </P
-></LI
-><LI
-><P
->    The Connection: keep-alive code properly deals with files
-    larger than 2GB. Previously the connection was closed too
-    early.
-   </P
-></LI
-><LI
-><P
->    The content length for files above 2GB is logged correctly.
-   </P
-></LI
-><LI
-><P
->    The user-manual directive on the show-status page links to
-    the documentation location specified with the directive,
-    not to the Privoxy website.
-   </P
-></LI
-><LI
-><P
->    When running in daemon mode, Privoxy doesn't log anything
-    to the console unless there are errors before the logfile
-    has been opened.
-   </P
-></LI
-><LI
-><P
->    The show-status page prints warnings about invalid directives
-    on the same line as the directives themselves.
-   </P
-></LI
-><LI
-><P
->    Fixed several justified (but harmless) compiler warnings,
-    mostly on 64 bit platforms.
-   </P
-></LI
-><LI
-><P
->    The mingw32 version explicitly requests the default charset
-    to prevent display problems with some fonts available on more
-    recent Windows versions. Patch by Burberry.
-   </P
-></LI
-><LI
-><P
->    The mingw32 version uses the Privoxy icon in the alt-tab
-    windows. Patch by Burberry.
-   </P
-></LI
-><LI
-><P
->    The timestamp and the thread id is omitted in the "Fatal error"
-    message box on mingw32.
-   </P
-></LI
-><LI
-><P
->    Fixed two related mingw32-only buffer overflows. Triggering
-    them required control over the configuration file, therefore
-    this isn't seen as a security issue.
-   </P
-></LI
-><LI
-><P
->    In verbose mode, or if the new option --show-skipped-tests
-    is used, Privoxy-Regression-Test logs skipped tests and the
-    skip reason.
-   </P
-></LI
-></UL
-></P
-><DIV
-CLASS="SECT2"
-><H2
-CLASS="SECT2"
-><A
-NAME="UPGRADERSNOTE"
->3.1. Note to Upgraders</A
-></H2
-><P
-> A quick list of things to be aware of before upgrading from earlier 
- versions of <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->:</P
-><P
-> <P
-></P
-><UL
-><LI
-><P
->   The recommended way to upgrade <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> is to backup your old 
-   configuration files, install the new ones, verify that <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
->
-   is working correctly and finally merge back your changes using
-   <SPAN
-CLASS="APPLICATION"
->diff</SPAN
-> and maybe <SPAN
-CLASS="APPLICATION"
->patch</SPAN
->.
-  </P
-><P
->   There are a number of new features in each <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> release and
-   most of them have to be explicitly enabled in the configuration
-   files. Old configuration files obviously don't do that and due
-   to syntax changes using old configuration files with a new
-   <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> isn't always possible anyway.
-  </P
-></LI
-><LI
-><P
->  
-    Note that some installers remove earlier versions completely,
-    including configuration files, therefore you should really save
-    any important configuration files!
-  </P
-></LI
-><LI
-><P
->  
-   On the other hand, other installers don't overwrite existing configuration 
-   files, thinking you will want to do that yourself.
-  </P
-></LI
-><LI
-><P
->  
-   <TT
-CLASS="FILENAME"
->standard.action</TT
-> has been merged into
-   the <TT
-CLASS="FILENAME"
->default.action</TT
-> file.
-  </P
-></LI
-><LI
-><P
->   In the default configuration only fatal errors are logged now.
-   You can change that in the <A
-HREF="config.html#DEBUG"
->debug section</A
->
-   of the configuration file. You may also want to enable more verbose
-   logging until you verified that the new <SPAN
-CLASS="APPLICATION"
->Privoxy</SPAN
-> version is working
-   as expected.
-  </P
-></LI
-><LI
-><P
->     Three other config file settings are now off by default: 
-     <A
-HREF="config.html#ENABLE-REMOTE-TOGGLE"
->enable-remote-toggle</A
->,
-     <A
-HREF="config.html#ENABLE-REMOTE-HTTP-TOGGLE"
->enable-remote-http-toggle</A
->,
-     and  <A
-HREF="config.html#ENABLE-EDIT-ACTIONS"
->enable-edit-actions</A
->. 
-     If you use or want these, you will need to explicitly enable them, and
-     be aware of the security issues involved. 
-    </P
-></LI
-></UL
-></P
-></DIV
-></DIV
-><DIV
-CLASS="NAVFOOTER"
-><HR
-ALIGN="LEFT"
-WIDTH="100%"><TABLE
-SUMMARY="Footer navigation table"
-WIDTH="100%"
-BORDER="0"
-CELLPADDING="0"
-CELLSPACING="0"
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
-><A
-HREF="installation.html"
-ACCESSKEY="P"
->Prev</A
-></TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
-><A
-HREF="index.html"
-ACCESSKEY="H"
->Home</A
-></TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
-><A
-HREF="quickstart.html"
-ACCESSKEY="N"
->Next</A
-></TD
-></TR
-><TR
-><TD
-WIDTH="33%"
-ALIGN="left"
-VALIGN="top"
->Installation</TD
-><TD
-WIDTH="34%"
-ALIGN="center"
-VALIGN="top"
->&nbsp;</TD
-><TD
-WIDTH="33%"
-ALIGN="right"
-VALIGN="top"
->Quickstart to Using Privoxy</TD
-></TR
-></TABLE
-></DIV
-></BODY
-></HTML
->
\ No newline at end of file
diff --git a/external/privoxy/encode.c b/external/privoxy/encode.c
deleted file mode 100644
index d4bb1ce..0000000
--- a/external/privoxy/encode.c
+++ /dev/null
@@ -1,430 +0,0 @@
-const char encode_rcs[] = "$Id: encode.c,v 1.14 2008/05/21 15:38:13 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/encode.c,v $
- *
- * Purpose     :  Functions to encode and decode URLs, and also to
- *                encode cookies and HTML text.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: encode.c,v $
- *    Revision 1.14  2008/05/21 15:38:13  fabiankeil
- *    Garbage-collect cookie_encode().
- *
- *    Revision 1.13  2007/08/18 14:34:27  fabiankeil
- *    Make xtoi() extern so it can be used in pcrs.c.
- *
- *    Revision 1.12  2007/08/04 10:15:51  fabiankeil
- *    Use strlcpy() instead of strcpy().
- *
- *    Revision 1.11  2006/12/28 18:25:53  fabiankeil
- *    Fixed gcc43 compiler warning.
- *
- *    Revision 1.10  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.8  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.7  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.6  2002/03/13 00:27:04  jongfoster
- *    Killing warnings
- *
- *    Revision 1.5  2002/03/07 03:46:53  oes
- *    Fixed compiler warnings etc
- *
- *    Revision 1.4  2002/01/22 23:28:07  jongfoster
- *    Adding convenience function html_encode_and_free_original()
- *    Making all functions accept NULL paramaters - in this case, they
- *    simply return NULL.  This allows error-checking to be deferred.
- *
- *    Revision 1.3  2001/11/13 00:16:40  jongfoster
- *    Replacing references to malloc.h with the standard stdlib.h
- *    (See ANSI or K&R 2nd Ed)
- *
- *    Revision 1.2  2001/05/17 22:52:35  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:51  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include "miscutil.h"
-#include "encode.h"
-
-const char encode_h_rcs[] = ENCODE_H_VERSION;
-
-/* Maps special characters in a URL to their equivalent % codes. */
-static const char * const url_code_map[256] = {
-   NULL, "%01", "%02", "%03", "%04", "%05", "%06", "%07", "%08", "%09",
-   "%0A", "%0B", "%0C", "%0D", "%0E", "%0F", "%10", "%11", "%12", "%13",
-   "%14", "%15", "%16", "%17", "%18", "%19", "%1A", "%1B", "%1C", "%1D",
-   "%1E", "%1F", "+",   "%21", "%22", "%23", "%24", "%25", "%26", "%27",
-   "%28", "%29", NULL,  "%2B", "%2C", NULL,  NULL,  "%2F", NULL,  NULL,
-   NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  "%3A", "%3B",
-   "%3C", "%3D", "%3E", "%3F", NULL,  NULL,  NULL,  NULL,  NULL,  NULL,
-   NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,
-   NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,
-   NULL,  "%5B", "%5C", "%5D", "%5E", NULL,  "%60", NULL,  NULL,  NULL,
-   NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,
-   NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,  NULL,
-   NULL,  NULL,  NULL,  "%7B", "%7C", "%7D", "%7E", "%7F", "%80", "%81",
-   "%82", "%83", "%84", "%85", "%86", "%87", "%88", "%89", "%8A", "%8B",
-   "%8C", "%8D", "%8E", "%8F", "%90", "%91", "%92", "%93", "%94", "%95",
-   "%96", "%97", "%98", "%99", "%9A", "%9B", "%9C", "%9D", "%9E", "%9F",
-   "%A0", "%A1", "%A2", "%A3", "%A4", "%A5", "%A6", "%A7", "%A8", "%A9",
-   "%AA", "%AB", "%AC", "%AD", "%AE", "%AF", "%B0", "%B1", "%B2", "%B3",
-   "%B4", "%B5", "%B6", "%B7", "%B8", "%B9", "%BA", "%BB", "%BC", "%BD",
-   "%BE", "%BF", "%C0", "%C1", "%C2", "%C3", "%C4", "%C5", "%C6", "%C7",
-   "%C8", "%C9", "%CA", "%CB", "%CC", "%CD", "%CE", "%CF", "%D0", "%D1",
-   "%D2", "%D3", "%D4", "%D5", "%D6", "%D7", "%D8", "%D9", "%DA", "%DB",
-   "%DC", "%DD", "%DE", "%DF", "%E0", "%E1", "%E2", "%E3", "%E4", "%E5",
-   "%E6", "%E7", "%E8", "%E9", "%EA", "%EB", "%EC", "%ED", "%EE", "%EF",
-   "%F0", "%F1", "%F2", "%F3", "%F4", "%F5", "%F6", "%F7", "%F8", "%F9",
-   "%FA", "%FB", "%FC", "%FD", "%FE", "%FF"
-};
-
-/* Maps special characters in HTML to their equivalent entites. */
-static const char * const html_code_map[256] = {
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL,"&quot;",NULL,NULL,NULL,"&amp;",NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   "&lt;",NULL,"&gt;",NULL,NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL, NULL
-};
-
-
-/*********************************************************************
- *
- * Function    :  html_encode
- *
- * Description :  Encodes a string so it's not interpreted as
- *                containing HTML tags or entities.
- *                Replaces <, >, &, and " with the appropriate HTML
- *                entities.
- *
- * Parameters  :
- *          1  :  s = String to encode.  Null-terminated.
- *
- * Returns     :  Encoded string, newly allocated on the heap. 
- *                Caller is responsible for freeing it with free().
- *                If s is NULL, or on out-of memory, returns NULL.
- *
- *********************************************************************/
-char * html_encode(const char *s)
-{
-   char * buf;
-   size_t buf_size;
-   
-   if (s == NULL)
-   {
-      return NULL;
-   }
-
-   /* each input char can expand to at most 6 chars */
-   buf_size = (strlen(s) * 6) + 1;
-   buf = (char *) malloc(buf_size);
-
-   if (buf)
-   {
-      char c;
-      char * p = buf;
-      while ( (c = *s++) != '\0')
-      {
-         const char * replace_with = html_code_map[(unsigned char) c];
-         if(replace_with != NULL)
-         {
-            const size_t bytes_written = (size_t)(p - buf);
-            assert(bytes_written < buf_size);
-            p += strlcpy(p, replace_with, buf_size - bytes_written);
-         }
-         else
-         {
-            *p++ = c;
-         }
-      }
-
-      *p = '\0';
-   }
-
-   assert(strlen(buf) < buf_size);
-   return(buf);
-}
-
-
-/*********************************************************************
- *
- * Function    :  html_encode_and_free_original
- *
- * Description :  Encodes a string so it's not interpreted as
- *                containing HTML tags or entities.
- *                Replaces <, >, &, and " with the appropriate HTML
- *                entities.  Free()s original string.
- *                If original string is NULL, simply returns NULL.
- *
- * Parameters  :
- *          1  :  s = String to encode.  Null-terminated.
- *
- * Returns     :  Encoded string, newly allocated on the heap. 
- *                Caller is responsible for freeing it with free().
- *                If s is NULL, or on out-of memory, returns NULL.
- *
- *********************************************************************/
-char * html_encode_and_free_original(char *s)
-{
-   char * result;
-   
-   if (s == NULL)
-   {
-      return NULL;
-   }
-
-   result = html_encode(s);
-   free(s);
-
-   return result;
-}
-
-
-/*********************************************************************
- *
- * Function    :  url_encode
- *
- * Description :  Encodes a string so it can be used in a URL
- *                query string.  Replaces special characters with
- *                the appropriate %xx codes.
- *
- * Parameters  :
- *          1  :  s = String to encode.  Null-terminated.
- *
- * Returns     :  Encoded string, newly allocated on the heap. 
- *                Caller is responsible for freeing it with free().
- *                If s is NULL, or on out-of memory, returns NULL.
- *
- *********************************************************************/
-char * url_encode(const char *s)
-{
-   char * buf;
-   size_t buf_size;
-
-   if (s == NULL)
-   {
-      return NULL;
-   }
-
-   /* each input char can expand to at most 3 chars */
-   buf_size = (strlen(s) * 3) + 1;
-   buf = (char *) malloc(buf_size);
-
-   if (buf)
-   {
-      char c;
-      char * p = buf;
-      while( (c = *s++) != '\0')
-      {
-         const char * replace_with = url_code_map[(unsigned char) c];
-         if (replace_with != NULL)
-         {
-            const size_t bytes_written = (size_t)(p - buf);
-            assert(bytes_written < buf_size);
-            p += strlcpy(p, replace_with, buf_size - bytes_written);
-         }
-         else
-         {
-            *p++ = c;
-         }
-      }
-
-      *p = '\0';
-
-   }
-
-   assert(strlen(buf) < buf_size);
-   return(buf);
-}
-
-
-/*********************************************************************
- *
- * Function    :  xdtoi
- *
- * Description :  Converts a single hex digit to an integer.
- *
- * Parameters  :
- *          1  :  d = in the range of ['0'..'9', 'A'..'F', 'a'..'f']
- *
- * Returns     :  The integer value, or -1 for non-hex characters.
- *
- *********************************************************************/
-static int xdtoi(const int d)
-{
-   if ((d >= '0') && (d <= '9'))
-   {
-      return(d - '0');
-   }
-   else if ((d >= 'a') && (d <= 'f')) 
-   {
-      return(d - 'a' + 10);
-   }
-   else if ((d >= 'A') && (d <= 'F'))
-   {
-      return(d - 'A' + 10);
-   }
-   else
-   {
-      return(-1);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  xtoi
- *
- * Description :  Hex string to integer conversion.
- *
- * Parameters  :
- *          1  :  s = a 2 digit hex string (e.g. "1f").  Only the
- *                    first two characters will be looked at.
- *
- * Returns     :  The integer value, or 0 for non-hex strings.
- *
- *********************************************************************/
-int xtoi(const char *s)
-{
-   int d1, d2;
-
-   d1 = xdtoi(*s);
-   if(d1 >= 0)
-   {
-      d2 = xdtoi(*(s+1));
-      if(d2 >= 0)
-      {
-         return (d1 << 4) + d2;
-      }
-   }
-
-   return 0;
-}
-
-
-/*********************************************************************
- *
- * Function    :  url_decode
- *
- * Description :  Decodes a URL query string, replacing %xx codes
- *                with their decoded form.
- *
- * Parameters  :
- *          1  :  s = String to decode.  Null-terminated.
- *
- * Returns     :  Decoded string, newly allocated on the heap. 
- *                Caller is responsible for freeing it with free().
- *
- *********************************************************************/
-char *url_decode(const char * s)
-{
-   char *buf = malloc(strlen(s) + 1);
-   char *q = buf;
-
-   if (buf)
-   {
-      while (*s)
-      {
-         switch (*s)
-         {
-            case '+':
-               s++;
-               *q++ = ' ';
-               break;
-
-            case '%':
-               if ((*q = (char)xtoi(s + 1)) != '\0')
-               {
-                  s += 3;
-                  q++;
-               }
-               else
-               {
-                  /* malformed, just use it */
-                  *q++ = *s++;
-               }
-               break;
-
-            default:
-               *q++ = *s++;
-               break;
-         }
-      }
-      *q = '\0';
-   }
-
-   return(buf);
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/encode.h b/external/privoxy/encode.h
deleted file mode 100644
index 728746b..0000000
--- a/external/privoxy/encode.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef ENCODE_H_INCLUDED
-#define ENCODE_H_INCLUDED
-#define ENCODE_H_VERSION "$Id: encode.h,v 1.9 2008/05/21 15:38:13 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/encode.h,v $
- *
- * Purpose     :  Functions to encode and decode URLs, and also to
- *                encode cookies and HTML text.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: encode.h,v $
- *    Revision 1.9  2008/05/21 15:38:13  fabiankeil
- *    Garbage-collect cookie_encode().
- *
- *    Revision 1.8  2007/08/18 14:34:27  fabiankeil
- *    Make xtoi() extern so it can be used in pcrs.c.
- *
- *    Revision 1.7  2006/07/18 14:48:45  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.5  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.4  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.3  2002/01/22 23:28:07  jongfoster
- *    Adding convenience function html_encode_and_free_original()
- *    Making all functions accept NULL paramaters - in this case, they
- *    simply return NULL.  This allows error-checking to be deferred.
- *
- *    Revision 1.2  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:51  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern char * html_encode(const char *s);
-extern char * url_encode(const char *s);
-extern char * url_decode(const char *str);
-extern int    xtoi(const char *s);
-extern char * html_encode_and_free_original(char *s);
-
-/* Revision control strings from this header and associated .c file */
-extern const char encode_rcs[];
-extern const char encode_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef ENCODE_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/errlog.c b/external/privoxy/errlog.c
deleted file mode 100644
index ca12d7f..0000000
--- a/external/privoxy/errlog.c
+++ /dev/null
@@ -1,1547 +0,0 @@
-const char errlog_rcs[] = "$Id: errlog.c,v 1.92 2009/03/20 03:39:31 ler762 Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/errlog.c,v $
- *
- * Purpose     :  Log errors to a designated destination in an elegant,
- *                printf-like fashion.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: errlog.c,v $
- *    Revision 1.92  2009/03/20 03:39:31  ler762
- *    I like having the version logged at startup and the Windows GUI stopped logging
- *    it after LOG_LEVEL_INFO was removed from
- *      static int debug = (LOG_LEVEL_FATAL | LOG_LEVEL_ERROR | LOG_LEVEL_INFO);
- *
- *    Revision 1.91  2009/03/18 21:56:30  fabiankeil
- *    In init_error_log(), suppress the "(Re-)Opening logfile" message if
- *    we're still logging to stderr. This restores the "silent mode", but
- *    with LOG_LEVEL_INFO enabled, the show_version() info is written to
- *    the logfile as intended.
- *
- *    Revision 1.90  2009/03/18 20:43:19  fabiankeil
- *    Don't enable LOG_LEVEL_INFO by default and don't apply the user's
- *    debug settings until the logfile has been opened (if there is one).
- *    Patch submitted by Roland in #2624120.
- *
- *    Revision 1.89  2009/03/07 12:56:12  fabiankeil
- *    Add log_error() support for unsigned long long (%lld).
- *
- *    Revision 1.88  2009/03/07 11:34:36  fabiankeil
- *    Omit timestamp and thread id in the mingw32 message box.
- *
- *    Revision 1.87  2009/03/01 18:28:24  fabiankeil
- *    Help clang understand that we aren't dereferencing
- *    NULL pointers here.
- *
- *    Revision 1.86  2009/02/09 21:21:15  fabiankeil
- *    Now that init_log_module() is called earlier, call show_version()
- *    later on from main() directly so it doesn't get called for --help
- *    or --version.
- *
- *    Revision 1.85  2009/02/06 17:51:38  fabiankeil
- *    Be prepared if I break the log module initialization again.
- *
- *    Revision 1.84  2008/12/14 15:46:22  fabiankeil
- *    Give crunched requests their own log level.
- *
- *    Revision 1.83  2008/12/04 18:14:32  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.82  2008/11/23 16:06:58  fabiankeil
- *    Update a log message I missed in 1.80.
- *
- *    Revision 1.81  2008/11/23 15:59:27  fabiankeil
- *    - Update copyright range.
- *    - Remove stray line breaks in a log message
- *      nobody is supposed to see anyway.
- *
- *    Revision 1.80  2008/11/23 15:49:49  fabiankeil
- *    In log_error(), don't surround the thread id with "Privoxy(" and ")".
- *
- *    Revision 1.79  2008/10/20 17:09:25  fabiankeil
- *    Update init_error_log() description to match reality.
- *
- *    Revision 1.78  2008/09/07 16:59:31  fabiankeil
- *    Update a comment to reflect that we
- *    have mutex support on mingw32 now.
- *
- *    Revision 1.77  2008/09/07 12:43:44  fabiankeil
- *    Move the LogPutString() call in log_error() into the locked
- *    region so the Windows GUI log is consistent with the logfile.
- *
- *    Revision 1.76  2008/09/07 12:35:05  fabiankeil
- *    Add mutex lock support for _WIN32.
- *
- *    Revision 1.75  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.74  2008/08/06 18:33:36  fabiankeil
- *    If the "close fd first" workaround doesn't work,
- *    the fatal error message will be lost, so we better
- *    explain the consequences while we still can.
- *
- *    Revision 1.73  2008/08/04 19:06:55  fabiankeil
- *    Add a lame workaround for the "can't open an already open
- *    logfile on OS/2" problem reported by Maynard in #2028842
- *    and describe what a real solution would look like.
- *
- *    Revision 1.72  2008/07/27 12:04:28  fabiankeil
- *    Fix a comment typo.
- *
- *    Revision 1.71  2008/06/28 17:17:15  fabiankeil
- *    Remove another stray semicolon.
- *
- *    Revision 1.70  2008/06/28 17:10:29  fabiankeil
- *    Remove stray semicolon in get_log_timestamp().
- *    Reported by Jochen Voss in #2005221.
- *
- *    Revision 1.69  2008/05/30 15:55:25  fabiankeil
- *    Declare variable "debug" static and complain about its name.
- *
- *    Revision 1.68  2008/04/27 16:50:46  fabiankeil
- *    Remove an incorrect assertion. The value of debug may change if
- *    the configuration is reloaded in another thread. While we could
- *    cache the initial value, the assertion doesn't seem worth it.
- *
- *    Revision 1.67  2008/03/27 18:27:23  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.66  2008/01/31 15:38:14  fabiankeil
- *    - Make the logfp assertion more strict. As of 1.63, the "||" could
- *      have been an "&&", which means we can use two separate assertions
- *      and skip on of them on Windows.
- *    - Break a long commit message line in two.
- *
- *    Revision 1.65  2008/01/31 14:44:33  fabiankeil
- *    Use (a != b) instead of !(a == b) so the sanity check looks less insane.
- *
- *    Revision 1.64  2008/01/21 18:56:46  david__schmidt
- *    Swap #def from negative to positive, re-joined it so it didn't
- *    span an assertion (compilation failure on OS/2)
- *
- *    Revision 1.63  2007/12/15 19:49:32  fabiankeil
- *    Stop overloading logfile to control the mingw32 log window as well.
- *    It's no longer necessary now that we disable all debug lines by default
- *    and at least one user perceived it as a regression (added in 1.55).
- *
- *    Revision 1.62  2007/11/30 15:33:46  fabiankeil
- *    Unbreak LOG_LEVEL_FATAL. It wasn't fatal with logging disabled
- *    and on mingw32 fatal log messages didn't end up in the log file.
- *
- *    Revision 1.61  2007/11/04 19:03:01  fabiankeil
- *    Fix another deadlock Hal spotted and that mysteriously didn't affect FreeBSD.
- *
- *    Revision 1.60  2007/11/03 19:03:31  fabiankeil
- *    - Prevent the Windows GUI from showing the version two times in a row.
- *    - Stop using the imperative in the "(Re-)Open logfile" message.
- *    - Ditch the "Switching to daemon mode" message as the detection
- *      whether or not we're already in daemon mode doesn't actually work.
- *
- *    Revision 1.59  2007/11/01 12:50:56  fabiankeil
- *    Here's looking at you, deadlock.
- *
- *    Revision 1.58  2007/10/28 19:04:21  fabiankeil
- *    Don't mention daemon mode in "Logging disabled" message. Some
- *    platforms call it differently and it's not really relevant anyway.
- *
- *    Revision 1.57  2007/10/27 13:02:26  fabiankeil
- *    Relocate daemon-mode-related log messages to make sure
- *    they aren't shown again in case of configuration reloads.
- *
- *    Revision 1.56  2007/10/14 14:26:56  fabiankeil
- *    Remove the old log_error() version.
- *
- *    Revision 1.55  2007/10/14 14:12:41  fabiankeil
- *    When in daemon mode, close stderr after the configuration file has been
- *    parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436.
- *
- *    Revision 1.54  2007/09/22 16:15:34  fabiankeil
- *    - Let it compile with pcc.
- *    - Move our includes below system includes to prevent macro conflicts.
- *
- *    Revision 1.53  2007/08/05 13:53:14  fabiankeil
- *    #1763173 from Stefan Huehner: declare some more functions
- *    static and use void instead of empty parameter lists.
- *
- *    Revision 1.52  2007/07/14 07:28:47  fabiankeil
- *    Add translation function for JB_ERR_FOO codes.
- *
- *    Revision 1.51  2007/05/11 11:51:34  fabiankeil
- *    Fix a type mismatch warning.
- *
- *    Revision 1.50  2007/04/11 10:55:44  fabiankeil
- *    Enforce some assertions that could be triggered
- *    on mingw32 and other systems where we use threads
- *    but no locks.
- *
- *    Revision 1.49  2007/04/08 16:44:15  fabiankeil
- *    We need <sys/time.h> for gettimeofday(), not <time.h>.
- *
- *    Revision 1.48  2007/03/31 13:33:28  fabiankeil
- *    Add alternative log_error() with timestamps
- *    that contain milliseconds and without using
- *    strcpy(), strcat() or sprintf().
- *
- *    Revision 1.47  2006/11/28 15:25:15  fabiankeil
- *    Only unlink the pidfile if it's actually used.
- *
- *    Revision 1.46  2006/11/13 19:05:51  fabiankeil
- *    Make pthread mutex locking more generic. Instead of
- *    checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- *    and use mutex locking unless there is an _r function
- *    available. Better safe than sorry.
- *
- *    Fixes "./configure --disable-pthread" and should result
- *    in less threading-related problems on pthread-using platforms,
- *    but it still doesn't fix BR#1122404.
- *
- *    Revision 1.45  2006/08/21 11:15:54  david__schmidt
- *    MS Visual C++ build updates
- *
- *    Revision 1.44  2006/08/18 16:03:16  david__schmidt
- *    Tweak for OS/2 build happiness.
- *
- *    Revision 1.43  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:
- *    http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.42  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.40.2.4  2005/04/03 20:10:50  david__schmidt
- *    Thanks to Jindrich Makovicka for a race condition fix for the log
- *    file.  The race condition remains for non-pthread implementations.
- *    Reference patch #1175720.
- *
- *    Revision 1.40.2.3  2003/03/07 03:41:04  david__schmidt
- *    Wrapping all *_r functions (the non-_r versions of them) with mutex 
- *    semaphores for OSX.  Hopefully this will take care of all of those pesky
- *    crash reports.
- *
- *    Revision 1.40.2.2  2002/09/28 00:30:57  david__schmidt
- *    Update error logging to give sane values for thread IDs on Mach kernels.
- *    It's still a hack, but at least it looks farily normal.  We print the
- *    absolute value of the first 4 bytes of the pthread_t modded with 1000.
- *
- *    Revision 1.40.2.1  2002/09/25 12:47:42  oes
- *    Make log_error safe against NULL string arguments
- *
- *    Revision 1.40  2002/05/22 01:27:27  david__schmidt
- *
- *    Add os2_socket_strerr mirroring w32_socket_strerr.
- *
- *    Revision 1.39  2002/04/03 17:15:27  gliptak
- *    zero padding thread ids in log
- *
- *    Revision 1.38  2002/03/31 17:18:59  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.37  2002/03/27 14:32:43  david__schmidt
- *    More compiler warning message maintenance
- *
- *    Revision 1.36  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.35  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.34  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.33  2002/03/13 00:27:04  jongfoster
- *    Killing warnings
- *
- *    Revision 1.32  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.31  2002/03/06 23:02:57  jongfoster
- *    Removing tabs
- *
- *    Revision 1.30  2002/03/05 22:43:45  david__schmidt
- *    - Better error reporting on OS/2
- *    - Fix double-slash comment (oops)
- *
- *    Revision 1.29  2002/03/04 23:45:13  jongfoster
- *    Printing thread ID if using Win32 native threads
- *
- *    Revision 1.28  2002/03/04 17:59:59  oes
- *    Deleted deletePidFile(), cosmetics
- *
- *    Revision 1.27  2002/03/04 02:08:01  david__schmidt
- *    Enable web editing of actions file on OS/2 (it had been broken all this time!)
- *
- *    Revision 1.26  2002/01/09 19:05:45  steudten
- *    Fix big memory leak.
- *
- *    Revision 1.25  2002/01/09 14:32:08  oes
- *    Added support for gmtime_r and localtime_r.
- *
- *    Revision 1.24  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.23  2001/11/07 00:02:13  steudten
- *    Add line number in error output for lineparsing for
- *    actionsfile and configfile.
- *    Special handling for CLF added.
- *
- *    Revision 1.22  2001/11/05 23:43:05  steudten
- *    Add time+date to log files.
- *
- *    Revision 1.21  2001/10/25 03:40:47  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.20  2001/09/16 23:04:34  jongfoster
- *    Fixing a warning
- *
- *    Revision 1.19  2001/09/13 20:08:06  jongfoster
- *    Adding support for LOG_LEVEL_CGI
- *
- *    Revision 1.18  2001/09/10 11:27:24  oes
- *    Declaration of w32_socket_strerr now conditional
- *
- *    Revision 1.17  2001/09/10 10:17:13  oes
- *    Removed unused variable; Fixed sprintf format
- *
- *    Revision 1.16  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.15  2001/07/29 17:41:10  jongfoster
- *    Now prints thread ID for each message (pthreads only)
- *
- *    Revision 1.14  2001/07/19 19:03:48  haroon
- *    - Added case for LOG_LEVEL_POPUPS
- *
- *    Revision 1.13  2001/07/13 13:58:58  oes
- *     - Added case for LOG_LEVEL_DEANIMATE
- *     - Removed all #ifdef PCRS
- *
- *    Revision 1.12  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.11  2001/06/01 18:14:49  jongfoster
- *    Changing the calls to strerr() to check HAVE_STRERR (which is defined
- *    in config.h if appropriate) rather than the NO_STRERR macro.
- *
- *    Revision 1.10  2001/05/29 11:52:21  oes
- *    Conditional compilation of w32_socket_error
- *
- *    Revision 1.9  2001/05/28 16:15:17  jongfoster
- *    Improved reporting of errors under Win32.
- *
- *    Revision 1.8  2001/05/26 17:25:14  jongfoster
- *    Added support for CLF (Common Log Format) and fixed LOG_LEVEL_LOG
- *
- *    Revision 1.7  2001/05/26 15:21:28  jongfoster
- *    Activity animation in Win32 GUI now works even if debug==0
- *
- *    Revision 1.6  2001/05/25 21:55:08  jongfoster
- *    Now cleans up properly on FATAL (removes taskbar icon etc)
- *
- *    Revision 1.5  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.4  2001/05/21 19:32:54  jongfoster
- *    Added another #ifdef _WIN_CONSOLE
- *
- *    Revision 1.3  2001/05/20 01:11:40  jongfoster
- *    Added support for LOG_LEVEL_FATAL
- *    Renamed LOG_LEVEL_FRC to LOG_LEVEL_FORCE,
- *    and LOG_LEVEL_REF to LOG_LEVEL_RE_FILTER
- *
- *    Revision 1.2  2001/05/17 22:42:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *     - Repaired logging for REF and FRC
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:51  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <string.h>
-
-#include "config.h"
-#include "miscutil.h"
-
-/* For gettimeofday() */
-#include <sys/time.h>
-
-#if !defined(_WIN32) && !defined(__OS2__)
-#include <unistd.h>
-#endif /* !defined(_WIN32) && !defined(__OS2__) */
-
-#include <errno.h>
-#include <assert.h>
-
-#ifdef _WIN32
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-#ifndef _WIN_CONSOLE
-#include "w32log.h"
-#endif /* ndef _WIN_CONSOLE */
-#endif /* def _WIN32 */
-#ifdef _MSC_VER
-#define inline __inline
-#endif /* def _MSC_VER */
-
-#ifdef __OS2__
-#include <sys/socket.h> /* For sock_errno */
-#define INCL_DOS
-#include <os2.h>
-#endif
-
-#include "errlog.h"
-#include "project.h"
-#include "jcc.h"
-
-const char errlog_h_rcs[] = ERRLOG_H_VERSION;
-
-
-/*
- * LOG_LEVEL_FATAL cannot be turned off.  (There are
- * some exceptional situations where we need to get a
- * message to the user).
- */
-#define LOG_LEVEL_MINIMUM  LOG_LEVEL_FATAL
-
-/* where to log (default: stderr) */
-static FILE *logfp = NULL;
-
-/* logging detail level. XXX: stupid name. */
-static int debug = (LOG_LEVEL_FATAL | LOG_LEVEL_ERROR);
-
-/* static functions */
-static void fatal_error(const char * error_message);
-#ifdef _WIN32
-static char *w32_socket_strerr(int errcode, char *tmp_buf);
-#endif
-#ifdef __OS2__
-static char *os2_socket_strerr(int errcode, char *tmp_buf);
-#endif
-
-#ifdef MUTEX_LOCKS_AVAILABLE
-static inline void lock_logfile(void)
-{
-   privoxy_mutex_lock(&log_mutex);
-}
-static inline void unlock_logfile(void)
-{
-   privoxy_mutex_unlock(&log_mutex);
-}
-static inline void lock_loginit(void)
-{
-   privoxy_mutex_lock(&log_init_mutex);
-}
-static inline void unlock_loginit(void)
-{
-   privoxy_mutex_unlock(&log_init_mutex);
-}
-#else /* ! MUTEX_LOCKS_AVAILABLE */
-/*
- * FIXME we need a cross-platform locking mechanism.
- * The locking/unlocking functions below should be 
- * fleshed out for non-pthread implementations.
- */ 
-static inline void lock_logfile() {}
-static inline void unlock_logfile() {}
-static inline void lock_loginit() {}
-static inline void unlock_loginit() {}
-#endif
-
-/*********************************************************************
- *
- * Function    :  fatal_error
- *
- * Description :  Displays a fatal error to standard error (or, on 
- *                a WIN32 GUI, to a dialog box), and exits Privoxy
- *                with status code 1.
- *
- * Parameters  :
- *          1  :  error_message = The error message to display.
- *
- * Returns     :  Does not return.
- *
- *********************************************************************/
-static void fatal_error(const char *error_message)
-{
-#if defined(_WIN32) && !defined(_WIN_CONSOLE)
-   /* Skip timestamp and thread id for the message box. */
-   const char *box_message = strstr(error_message, "Fatal error");
-   if (NULL == box_message)
-   {
-      /* Shouldn't happen but ... */
-      box_message = error_message;
-   }
-   MessageBox(g_hwndLogFrame, box_message, "Privoxy Error", 
-      MB_OK | MB_ICONERROR | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST);  
-
-   /* Cleanup - remove taskbar icon etc. */
-   TermLogWindow();
-#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */
-
-   if (logfp != NULL)
-   {
-      fputs(error_message, logfp);
-   }
-
-#if defined(unix)
-   if (pidfile)
-   {
-      unlink(pidfile);
-   }
-#endif /* unix */
-
-   exit(1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  show_version
- *
- * Description :  Logs the Privoxy version and the program name.
- *
- * Parameters  :
- *          1  :  prog_name = The program name.
- *
- * Returns     :  Nothing.
- *
- *********************************************************************/
-void show_version(const char *prog_name)
-{
-   log_error(LOG_LEVEL_INFO, "Privoxy version " VERSION);
-   if (prog_name != NULL)
-   {
-      log_error(LOG_LEVEL_INFO, "Program name: %s", prog_name);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  init_log_module
- *
- * Description :  Initializes the logging module to log to stderr.
- *                Can only be called while stderr hasn't been closed
- *                yet and is only supposed to be called once.
- *
- * Parameters  :
- *          1  :  prog_name = The program name.
- *
- * Returns     :  Nothing.
- *
- *********************************************************************/
-void init_log_module(void)
-{
-   lock_logfile();
-   logfp = stderr;
-   unlock_logfile();
-   set_debug_level(debug);
-}
-
-
-/*********************************************************************
- *
- * Function    :  set_debug_level
- *
- * Description :  Sets the debug level to the provided value
- *                plus LOG_LEVEL_MINIMUM.
- *
- *                XXX: we should only use the LOG_LEVEL_MINIMUM
- *                until the first time the configuration file has
- *                been parsed.
- *                
- * Parameters  :  1: debug_level = The debug level to set.
- *
- * Returns     :  Nothing.
- *
- *********************************************************************/
-void set_debug_level(int debug_level)
-{
-   debug = debug_level | LOG_LEVEL_MINIMUM;
-}
-
-
-/*********************************************************************
- *
- * Function    :  disable_logging
- *
- * Description :  Disables logging.
- *                
- * Parameters  :  None.
- *
- * Returns     :  Nothing.
- *
- *********************************************************************/
-void disable_logging(void)
-{
-   if (logfp != NULL)
-   {
-      log_error(LOG_LEVEL_INFO,
-         "No logfile configured. Please enable it before reporting any problems.");
-      lock_logfile();
-      fclose(logfp);
-      logfp = NULL;
-      unlock_logfile();
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  init_error_log
- *
- * Description :  Initializes the logging module to log to a file.
- *
- *                XXX: should be renamed.
- *
- * Parameters  :
- *          1  :  prog_name  = The program name.
- *          2  :  logfname   = The logfile to (re)open.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void init_error_log(const char *prog_name, const char *logfname)
-{
-   FILE *fp;
-
-   assert(NULL != logfname);
-
-   lock_loginit();
-
-   if ((logfp != NULL) && (logfp != stderr))
-   {
-      log_error(LOG_LEVEL_INFO, "(Re-)Opening logfile \'%s\'", logfname);
-   }
-
-   /* set the designated log file */
-   fp = fopen(logfname, "a");
-   if ((NULL == fp) && (logfp != NULL))
-   {
-      /*
-       * Some platforms (like OS/2) don't allow us to open
-       * the same file twice, therefore we give it another
-       * shot after closing the old file descriptor first.
-       *
-       * We don't do it right away because it prevents us
-       * from logging the "can't open logfile" message to
-       * the old logfile.
-       *
-       * XXX: this is a lame workaround and once the next
-       * release is out we should stop bothering reopening
-       * the logfile unless we have to.
-       *
-       * Currently we reopen it every time the config file
-       * has been reloaded, but actually we only have to
-       * reopen it if the file name changed or if the
-       * configuration reloas was caused by a SIGHUP.
-       */
-      log_error(LOG_LEVEL_INFO, "Failed to reopen logfile: \'%s\'. "
-         "Retrying after closing the old file descriptor first. If that "
-         "doesn't work, Privoxy will exit without being able to log a message.",
-         logfname);
-      lock_logfile();
-      fclose(logfp);
-      logfp = NULL;
-      unlock_logfile();
-      fp = fopen(logfname, "a");
-   }
-
-   if (NULL == fp)
-   {
-      log_error(LOG_LEVEL_FATAL, "init_error_log(): can't open logfile: \'%s\'", logfname);
-   }
-
-   /* set logging to be completely unbuffered */
-   setbuf(fp, NULL);
-
-   lock_logfile();
-   if (logfp != NULL)
-   {
-      fclose(logfp);
-   }
-   logfp = fp;
-   unlock_logfile();
-
-   show_version(prog_name);
-
-   unlock_loginit();
-
-} /* init_error_log */
-
-
-/*********************************************************************
- *
- * Function    :  get_thread_id
- *
- * Description :  Returns a number that is different for each thread.
- *
- *                XXX: Should be moved elsewhere (miscutil.c?)
- *                
- * Parameters  :  None
- *
- * Returns     :  thread_id
- *
- *********************************************************************/
-static long get_thread_id(void)
-{
-   long this_thread = 1;  /* was: pthread_t this_thread;*/
-
-#ifdef __OS2__
-   PTIB     ptib;
-   APIRET   ulrc; /* XXX: I have no clue what this does */
-#endif /* __OS2__ */
-
-   /* FIXME get current thread id */
-#ifdef FEATURE_PTHREAD
-   this_thread = (long)pthread_self();
-#ifdef __MACH__
-   /*
-    * Mac OSX (and perhaps other Mach instances) doesn't have a debuggable
-    * value at the first 4 bytes of pthread_self()'s return value, a pthread_t.
-    * pthread_t is supposed to be opaque... but it's fairly random, though, so
-    * we make it mostly presentable.
-    */
-   this_thread = abs(this_thread % 1000);
-#endif /* def __MACH__ */
-#elif defined(_WIN32)
-   this_thread = GetCurrentThreadId();
-#elif defined(__OS2__)
-   ulrc = DosGetInfoBlocks(&ptib, NULL);
-   if (ulrc == 0)
-     this_thread = ptib -> tib_ptib2 -> tib2_ultid;
-#endif /* def FEATURE_PTHREAD */
-
-   return this_thread;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_log_timestamp
- *
- * Description :  Generates the time stamp for the log message prefix.
- *
- * Parameters  :
- *          1  :  buffer = Storage buffer
- *          2  :  buffer_size = Size of storage buffer
- *
- * Returns     :  Number of written characters or 0 for error.
- *
- *********************************************************************/
-static inline size_t get_log_timestamp(char *buffer, size_t buffer_size)
-{
-   size_t length;
-   time_t now; 
-   struct tm tm_now;
-   struct timeval tv_now; /* XXX: stupid name */
-   long msecs;
-   int msecs_length = 0;
-
-   gettimeofday(&tv_now, NULL);
-   msecs = tv_now.tv_usec / 1000;
-
-   time(&now);
-
-#ifdef HAVE_LOCALTIME_R
-   tm_now = *localtime_r(&now, &tm_now);
-#elif FEATURE_PTHREAD
-   privoxy_mutex_lock(&localtime_mutex);
-   tm_now = *localtime(&now); 
-   privoxy_mutex_unlock(&localtime_mutex);
-#else
-   tm_now = *localtime(&now); 
-#endif
-
-   length = strftime(buffer, buffer_size, "%b %d %H:%M:%S", &tm_now);
-   if (length > (size_t)0)
-   {
-      msecs_length = snprintf(buffer+length, buffer_size - length, ".%.3ld", msecs);               
-   }
-   if (msecs_length > 0)
-   {
-      length += (size_t)msecs_length;
-   }
-   else
-   {
-      length = 0;
-   }
-
-   return length;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_clf_timestamp
- *
- * Description :  Generates a Common Log Format time string.
- *
- * Parameters  :
- *          1  :  buffer = Storage buffer
- *          2  :  buffer_size = Size of storage buffer
- *
- * Returns     :  Number of written characters or 0 for error.
- *
- *********************************************************************/
-static inline size_t get_clf_timestamp(char *buffer, size_t buffer_size)
-{
-   /*
-    * Complex because not all OSs have tm_gmtoff or
-    * the %z field in strftime()
-    */
-   time_t now;
-   struct tm *tm_now; 
-   struct tm gmt;
-#ifdef HAVE_LOCALTIME_R
-   struct tm dummy;
-#endif
-   int days, hrs, mins;
-   size_t length;
-   int tz_length = 0;
-
-   time (&now); 
-#ifdef HAVE_GMTIME_R
-   gmt = *gmtime_r(&now, &gmt);
-#elif FEATURE_PTHREAD
-   privoxy_mutex_lock(&gmtime_mutex);
-   gmt = *gmtime(&now);
-   privoxy_mutex_unlock(&gmtime_mutex);
-#else
-   gmt = *gmtime(&now);
-#endif
-#ifdef HAVE_LOCALTIME_R
-   tm_now = localtime_r(&now, &dummy);
-#elif FEATURE_PTHREAD
-   privoxy_mutex_lock(&localtime_mutex);
-   tm_now = localtime(&now); 
-   privoxy_mutex_unlock(&localtime_mutex);
-#else
-   tm_now = localtime(&now); 
-#endif
-   days = tm_now->tm_yday - gmt.tm_yday; 
-   hrs = ((days < -1 ? 24 : 1 < days ? -24 : days * 24) + tm_now->tm_hour - gmt.tm_hour); 
-   mins = hrs * 60 + tm_now->tm_min - gmt.tm_min; 
-
-   length = strftime(buffer, buffer_size, "%d/%b/%Y:%H:%M:%S ", tm_now);
-
-   if (length > (size_t)0)
-   {
-      tz_length = snprintf(buffer+length, buffer_size-length,
-                     "%+03d%02d", mins / 60, abs(mins) % 60);
-   }
-   if (tz_length > 0)
-   {
-      length += (size_t)tz_length;
-   }
-   else
-   {
-      length = 0;
-   }
-
-   return length;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_log_level_string
- *
- * Description :  Translates a numerical loglevel into a string.
- *
- * Parameters  :  
- *          1  :  loglevel = LOG_LEVEL_FOO
- *
- * Returns     :  Log level string.
- *
- *********************************************************************/
-static inline const char *get_log_level_string(int loglevel)
-{
-   char *log_level_string = NULL;
-
-   assert(0 < loglevel);
-
-   switch (loglevel)
-   {
-      case LOG_LEVEL_ERROR:
-         log_level_string = "Error";
-         break;
-      case LOG_LEVEL_FATAL:
-         log_level_string = "Fatal error";
-         break;
-      case LOG_LEVEL_GPC:
-         log_level_string = "Request";
-         break;
-      case LOG_LEVEL_CONNECT:
-         log_level_string = "Connect";
-         break;
-      case LOG_LEVEL_LOG:
-         log_level_string = "Writing";
-         break;
-      case LOG_LEVEL_HEADER:
-         log_level_string = "Header";
-         break;
-      case LOG_LEVEL_INFO:
-         log_level_string = "Info";
-         break;
-      case LOG_LEVEL_RE_FILTER:
-         log_level_string = "Re-Filter";
-         break;
-#ifdef FEATURE_FORCE_LOAD
-      case LOG_LEVEL_FORCE:
-         log_level_string = "Force";
-         break;
-#endif /* def FEATURE_FORCE_LOAD */
-#ifdef FEATURE_FAST_REDIRECTS
-      case LOG_LEVEL_REDIRECTS:
-         log_level_string = "Redirect";
-         break;
-#endif /* def FEATURE_FAST_REDIRECTS */
-      case LOG_LEVEL_DEANIMATE:
-         log_level_string = "Gif-Deanimate";
-         break;
-      case LOG_LEVEL_CRUNCH:
-         log_level_string = "Crunch";
-         break;
-      case LOG_LEVEL_CGI:
-         log_level_string = "CGI";
-         break;
-      default:
-         log_level_string = "Unknown log level";
-         break;
-   }
-   assert(NULL != log_level_string);
-
-   return log_level_string;
-}
-
-
-/*********************************************************************
- *
- * Function    :  log_error
- *
- * Description :  This is the error-reporting and logging function.
- *
- * Parameters  :
- *          1  :  loglevel  = the type of message to be logged
- *          2  :  fmt       = the main string we want logged, printf-like
- *          3  :  ...       = arguments to be inserted in fmt (printf-like).
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void log_error(int loglevel, const char *fmt, ...)
-{
-   va_list ap;
-   char *outbuf = NULL;
-   static char *outbuf_save = NULL;
-   char tempbuf[BUFFER_SIZE];
-   size_t length = 0;
-   const char * src = fmt;
-   long thread_id;
-   char timestamp[30];
-   /*
-    * XXX: Make this a config option,
-    * why else do we allocate instead of using
-    * an array?
-    */
-   size_t log_buffer_size = BUFFER_SIZE;
-
-#if defined(_WIN32) && !defined(_WIN_CONSOLE)
-   /*
-    * Irrespective of debug setting, a GET/POST/CONNECT makes
-    * the taskbar icon animate.  (There is an option to disable
-    * this but checking that is handled inside LogShowActivity()).
-    */
-   if ((loglevel == LOG_LEVEL_GPC) || (loglevel == LOG_LEVEL_CRUNCH))
-   {
-      LogShowActivity();
-   }
-#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */
-
-   /*
-    * verify that the loglevel applies to current
-    * settings and that logging is enabled.
-    * Bail out otherwise.
-    */
-   if ((0 == (loglevel & debug))
-#ifndef _WIN32
-      || (logfp == NULL)
-#endif
-      )
-   {
-      if (loglevel == LOG_LEVEL_FATAL)
-      {
-         fatal_error("Fatal error. You're not supposed to"
-            "see this message. Please file a bug report.");
-      }
-      return;
-   }
-
-   thread_id = get_thread_id();
-   get_log_timestamp(timestamp, sizeof(timestamp));
-
-   /* protect the whole function because of the static buffer (outbuf) */
-   lock_logfile();
-
-   if (NULL == outbuf_save) 
-   {
-      outbuf_save = (char*)zalloc(log_buffer_size + 1); /* +1 for paranoia */
-      if (NULL == outbuf_save)
-      {
-         snprintf(tempbuf, sizeof(tempbuf),
-            "%s %08lx Fatal error: Out of memory in log_error().",
-            timestamp, thread_id);
-         fatal_error(tempbuf); /* Exit */
-         return;
-      }
-   }
-   outbuf = outbuf_save;
-
-   /*
-    * Memsetting the whole buffer to zero (in theory)
-    * makes things easier later on.
-    */
-   memset(outbuf, 0, log_buffer_size);
-
-   /* Add prefix for everything but Common Log Format messages */
-   if (loglevel != LOG_LEVEL_CLF)
-   {
-      length = (size_t)snprintf(outbuf, log_buffer_size, "%s %08lx %s: ",
-         timestamp, thread_id, get_log_level_string(loglevel));
-   }
-
-   /* get ready to scan var. args. */
-   va_start(ap, fmt);
-
-   /* build formatted message from fmt and var-args */
-   while ((*src) && (length < log_buffer_size-2))
-   {
-      const char *sval = NULL; /* %N string  */
-      int ival;                /* %N string length or an error code */
-      unsigned uval;           /* %u value */
-      long lval;               /* %l value */
-      unsigned long ulval;     /* %ul value */
-      char ch;
-      const char *format_string = tempbuf;
-
-      ch = *src++;
-      if (ch != '%')
-      {
-         outbuf[length++] = ch;
-         /*
-          * XXX: Only necessary on platforms where multiple threads
-          * can write to the buffer at the same time because we
-          * don't support mutexes (OS/2 for example).
-          */
-         outbuf[length] = '\0';
-         continue;
-      }
-      outbuf[length] = '\0';
-      ch = *src++;
-      switch (ch) {
-         case '%':
-            tempbuf[0] = '%';
-            tempbuf[1] = '\0';
-            break;
-         case 'd':
-            ival = va_arg( ap, int );
-            snprintf(tempbuf, sizeof(tempbuf), "%d", ival);
-            break;
-         case 'u':
-            uval = va_arg( ap, unsigned );
-            snprintf(tempbuf, sizeof(tempbuf), "%u", uval);
-            break;
-         case 'l':
-            /* this is a modifier that must be followed by u, lu, or d */
-            ch = *src++;
-            if (ch == 'd')
-            {
-               lval = va_arg( ap, long );
-               snprintf(tempbuf, sizeof(tempbuf), "%ld", lval);
-            }
-            else if (ch == 'u')
-            {
-               ulval = va_arg( ap, unsigned long );
-               snprintf(tempbuf, sizeof(tempbuf), "%lu", ulval);
-            }
-            else if ((ch == 'l') && (*src == 'u'))
-            {
-               unsigned long long lluval = va_arg(ap, unsigned long long);
-               snprintf(tempbuf, sizeof(tempbuf), "%llu", lluval);
-               ch = *src++;
-            }
-            else
-            {
-               snprintf(tempbuf, sizeof(tempbuf), "Bad format string: \"%s\"", fmt);
-               loglevel = LOG_LEVEL_FATAL;
-            }
-            break;
-         case 'c':
-            /*
-             * Note that char paramaters are converted to int, so we need to
-             * pass "int" to va_arg.  (See K&R, 2nd ed, section A7.3.2, page 202)
-             */
-            tempbuf[0] = (char) va_arg(ap, int);
-            tempbuf[1] = '\0';
-            break;
-         case 's':
-            format_string = va_arg(ap, char *);
-            if (format_string == NULL)
-            {
-               format_string = "[null]";
-            }
-            break;
-         case 'N':
-            /*
-             * Non-standard: Print a counted unterminated string.
-             * Takes 2 parameters: int length, const char * string.
-             */
-            ival = va_arg(ap, int);
-            sval = va_arg(ap, char *);
-            if (sval == NULL)
-            {
-               format_string = "[null]";
-            }
-            else if (ival <= 0)
-            {
-               if (0 == ival)
-               {
-                  /* That's ok (but stupid) */
-                  tempbuf[0] = '\0';
-               }
-               else
-               {
-                  /*
-                   * That's not ok (and even more stupid)
-                   */
-                  assert(ival >= 0);
-                  format_string = "[counted string lenght < 0]";
-               }
-            }
-            else if ((size_t)ival >= sizeof(tempbuf))
-            {
-               /*
-                * String is too long, copy as much as possible.
-                * It will be further truncated later.
-                */
-               memcpy(tempbuf, sval, sizeof(tempbuf)-1);
-               tempbuf[sizeof(tempbuf)-1] = '\0';
-            }
-            else
-            {
-               memcpy(tempbuf, sval, (size_t) ival);
-               tempbuf[ival] = '\0';
-            }
-            break;
-         case 'E':
-            /* Non-standard: Print error code from errno */
-#ifdef _WIN32
-            ival = WSAGetLastError();
-            format_string = w32_socket_strerr(ival, tempbuf);
-#elif __OS2__
-            ival = sock_errno();
-            if (ival != 0)
-            {
-               format_string = os2_socket_strerr(ival, tempbuf);
-            }
-            else
-            {
-               ival = errno;
-               format_string = strerror(ival);
-            }
-#else /* ifndef _WIN32 */
-            ival = errno; 
-#ifdef HAVE_STRERROR
-            format_string = strerror(ival);
-#else /* ifndef HAVE_STRERROR */
-            format_string = NULL;
-#endif /* ndef HAVE_STRERROR */
-            if (sval == NULL)
-            {
-               snprintf(tempbuf, sizeof(tempbuf), "(errno = %d)", ival);
-            }
-#endif /* ndef _WIN32 */
-            break;
-         case 'T':
-            /* Non-standard: Print a Common Log File timestamp */
-            get_clf_timestamp(tempbuf, sizeof(tempbuf));
-            break;
-         default:
-            snprintf(tempbuf, sizeof(tempbuf), "Bad format string: \"%s\"", fmt);
-            loglevel = LOG_LEVEL_FATAL;
-            break;
-      } /* switch( p ) */
-
-      assert(length < log_buffer_size);
-      length += strlcpy(outbuf + length, format_string, log_buffer_size - length);
-
-      if (length >= log_buffer_size-2)
-      {
-         static char warning[] = "... [too long, truncated]";
-
-         length = log_buffer_size - sizeof(warning) - 1;
-         length += strlcpy(outbuf + length, warning, log_buffer_size - length);
-         assert(length < log_buffer_size);
-
-         break;
-      }
-   } /* for( p ... ) */
-
-   /* done with var. args */
-   va_end(ap);
-
-   assert(length < log_buffer_size);
-   length += strlcpy(outbuf + length, "\n", log_buffer_size - length);
-
-   /* Some sanity checks */
-   if ((length >= log_buffer_size)
-    || (outbuf[log_buffer_size-1] != '\0')
-    || (outbuf[log_buffer_size] != '\0')
-      )
-   {
-      /* Repeat as assertions */
-      assert(length < log_buffer_size);
-      assert(outbuf[log_buffer_size-1] == '\0');
-      /*
-       * outbuf's real size is log_buffer_size+1,
-       * so while this looks like an off-by-one,
-       * we're only checking our paranoia byte.
-       */
-      assert(outbuf[log_buffer_size] == '\0');
-
-      snprintf(outbuf, log_buffer_size,
-         "%s %08lx Fatal error: log_error()'s sanity checks failed."
-         "length: %d. Exiting.",
-         timestamp, thread_id, (int)length);
-      loglevel = LOG_LEVEL_FATAL;
-   }
-
-#ifndef _WIN32
-   /*
-    * On Windows this is acceptable in case
-    * we are logging to the GUI window only.
-    */
-   assert(NULL != logfp);
-#endif
-
-   if (loglevel == LOG_LEVEL_FATAL)
-   {
-      fatal_error(outbuf_save);
-      /* Never get here */
-   }
-   if (logfp != NULL)
-   {
-      fputs(outbuf_save, logfp);
-   }
-
-#if defined(_WIN32) && !defined(_WIN_CONSOLE)
-   /* Write to display */
-   LogPutString(outbuf_save);
-#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */
-
-   unlock_logfile();
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  jb_err_to_string
- *
- * Description :  Translates JB_ERR_FOO codes into strings.
- *
- *                XXX: the type of error codes is jb_err
- *                but the typedef'inition is currently not
- *                visible to all files that include errlog.h.
- *
- * Parameters  :
- *          1  :  error = a valid jb_err code
- *
- * Returns     :  A string with the jb_err translation
- *
- *********************************************************************/
-const char *jb_err_to_string(int error)
-{
-   switch (error)
-   {
-      case JB_ERR_OK:
-         return "Success, no error";
-      case JB_ERR_MEMORY:
-         return "Out of memory";
-      case JB_ERR_CGI_PARAMS:
-         return "Missing or corrupt CGI parameters";
-      case JB_ERR_FILE:
-         return "Error opening, reading or writing a file";
-      case JB_ERR_PARSE:
-         return "Parse error";
-      case JB_ERR_MODIFIED:
-         return "File has been modified outside of the CGI actions editor.";
-      case JB_ERR_COMPRESS:
-         return "(De)compression failure";
-      default:
-         assert(0);
-         return "Unknown error";
-   }
-   assert(0);
-   return "Internal error";
-}
-
-#ifdef _WIN32
-/*********************************************************************
- *
- * Function    :  w32_socket_strerr
- *
- * Description :  Translate the return value from WSAGetLastError()
- *                into a string.
- *
- * Parameters  :
- *          1  :  errcode = The return value from WSAGetLastError().
- *          2  :  tmp_buf = A temporary buffer that might be used to
- *                          store the string.
- *
- * Returns     :  String representing the error code.  This may be
- *                a global string constant or a string stored in
- *                tmp_buf.
- *
- *********************************************************************/
-static char *w32_socket_strerr(int errcode, char *tmp_buf)
-{
-#define TEXT_FOR_ERROR(code,text) \
-   if (errcode == code)           \
-   {                              \
-      return #code " - " text;    \
-   }
-
-   TEXT_FOR_ERROR(WSAEACCES, "Permission denied")
-   TEXT_FOR_ERROR(WSAEADDRINUSE, "Address already in use.")
-   TEXT_FOR_ERROR(WSAEADDRNOTAVAIL, "Cannot assign requested address.");
-   TEXT_FOR_ERROR(WSAEAFNOSUPPORT, "Address family not supported by protocol family.");
-   TEXT_FOR_ERROR(WSAEALREADY, "Operation already in progress.");
-   TEXT_FOR_ERROR(WSAECONNABORTED, "Software caused connection abort.");
-   TEXT_FOR_ERROR(WSAECONNREFUSED, "Connection refused.");
-   TEXT_FOR_ERROR(WSAECONNRESET, "Connection reset by peer.");
-   TEXT_FOR_ERROR(WSAEDESTADDRREQ, "Destination address required.");
-   TEXT_FOR_ERROR(WSAEFAULT, "Bad address.");
-   TEXT_FOR_ERROR(WSAEHOSTDOWN, "Host is down.");
-   TEXT_FOR_ERROR(WSAEHOSTUNREACH, "No route to host.");
-   TEXT_FOR_ERROR(WSAEINPROGRESS, "Operation now in progress.");
-   TEXT_FOR_ERROR(WSAEINTR, "Interrupted function call.");
-   TEXT_FOR_ERROR(WSAEINVAL, "Invalid argument.");
-   TEXT_FOR_ERROR(WSAEISCONN, "Socket is already connected.");
-   TEXT_FOR_ERROR(WSAEMFILE, "Too many open sockets.");
-   TEXT_FOR_ERROR(WSAEMSGSIZE, "Message too long.");
-   TEXT_FOR_ERROR(WSAENETDOWN, "Network is down.");
-   TEXT_FOR_ERROR(WSAENETRESET, "Network dropped connection on reset.");
-   TEXT_FOR_ERROR(WSAENETUNREACH, "Network is unreachable.");
-   TEXT_FOR_ERROR(WSAENOBUFS, "No buffer space available.");
-   TEXT_FOR_ERROR(WSAENOPROTOOPT, "Bad protocol option.");
-   TEXT_FOR_ERROR(WSAENOTCONN, "Socket is not connected.");
-   TEXT_FOR_ERROR(WSAENOTSOCK, "Socket operation on non-socket.");
-   TEXT_FOR_ERROR(WSAEOPNOTSUPP, "Operation not supported.");
-   TEXT_FOR_ERROR(WSAEPFNOSUPPORT, "Protocol family not supported.");
-   TEXT_FOR_ERROR(WSAEPROCLIM, "Too many processes.");
-   TEXT_FOR_ERROR(WSAEPROTONOSUPPORT, "Protocol not supported.");
-   TEXT_FOR_ERROR(WSAEPROTOTYPE, "Protocol wrong type for socket.");
-   TEXT_FOR_ERROR(WSAESHUTDOWN, "Cannot send after socket shutdown.");
-   TEXT_FOR_ERROR(WSAESOCKTNOSUPPORT, "Socket type not supported.");
-   TEXT_FOR_ERROR(WSAETIMEDOUT, "Connection timed out.");
-   TEXT_FOR_ERROR(WSAEWOULDBLOCK, "Resource temporarily unavailable.");
-   TEXT_FOR_ERROR(WSAHOST_NOT_FOUND, "Host not found.");
-   TEXT_FOR_ERROR(WSANOTINITIALISED, "Successful WSAStartup not yet performed.");
-   TEXT_FOR_ERROR(WSANO_DATA, "Valid name, no data record of requested type.");
-   TEXT_FOR_ERROR(WSANO_RECOVERY, "This is a non-recoverable error.");
-   TEXT_FOR_ERROR(WSASYSNOTREADY, "Network subsystem is unavailable.");
-   TEXT_FOR_ERROR(WSATRY_AGAIN, "Non-authoritative host not found.");
-   TEXT_FOR_ERROR(WSAVERNOTSUPPORTED, "WINSOCK.DLL version out of range.");
-   TEXT_FOR_ERROR(WSAEDISCON, "Graceful shutdown in progress.");
-   /*
-    * The following error codes are documented in the Microsoft WinSock
-    * reference guide, but don't actually exist.
-    *
-    * TEXT_FOR_ERROR(WSA_INVALID_HANDLE, "Specified event object handle is invalid.");
-    * TEXT_FOR_ERROR(WSA_INVALID_PARAMETER, "One or more parameters are invalid.");
-    * TEXT_FOR_ERROR(WSAINVALIDPROCTABLE, "Invalid procedure table from service provider.");
-    * TEXT_FOR_ERROR(WSAINVALIDPROVIDER, "Invalid service provider version number.");
-    * TEXT_FOR_ERROR(WSA_IO_PENDING, "Overlapped operations will complete later.");
-    * TEXT_FOR_ERROR(WSA_IO_INCOMPLETE, "Overlapped I/O event object not in signaled state.");
-    * TEXT_FOR_ERROR(WSA_NOT_ENOUGH_MEMORY, "Insufficient memory available.");
-    * TEXT_FOR_ERROR(WSAPROVIDERFAILEDINIT, "Unable to initialize a service provider.");
-    * TEXT_FOR_ERROR(WSASYSCALLFAILURE, "System call failure.");
-    * TEXT_FOR_ERROR(WSA_OPERATION_ABORTED, "Overlapped operation aborted.");
-    */
-
-   sprintf(tmp_buf, "(error number %d)", errcode);
-   return tmp_buf;
-}
-#endif /* def _WIN32 */
-
-
-#ifdef __OS2__
-/*********************************************************************
- *
- * Function    :  os2_socket_strerr
- *
- * Description :  Translate the return value from sock_errno()
- *                into a string.
- *
- * Parameters  :
- *          1  :  errcode = The return value from sock_errno().
- *          2  :  tmp_buf = A temporary buffer that might be used to
- *                          store the string.
- *
- * Returns     :  String representing the error code.  This may be
- *                a global string constant or a string stored in
- *                tmp_buf.
- *
- *********************************************************************/
-static char *os2_socket_strerr(int errcode, char *tmp_buf)
-{
-#define TEXT_FOR_ERROR(code,text) \
-   if (errcode == code)           \
-   {                              \
-      return #code " - " text;    \
-   }
-
-   TEXT_FOR_ERROR(SOCEPERM          , "Not owner.")
-   TEXT_FOR_ERROR(SOCESRCH          , "No such process.")
-   TEXT_FOR_ERROR(SOCEINTR          , "Interrupted system call.")
-   TEXT_FOR_ERROR(SOCENXIO          , "No such device or address.")
-   TEXT_FOR_ERROR(SOCEBADF          , "Bad file number.")
-   TEXT_FOR_ERROR(SOCEACCES         , "Permission denied.")
-   TEXT_FOR_ERROR(SOCEFAULT         , "Bad address.")
-   TEXT_FOR_ERROR(SOCEINVAL         , "Invalid argument.")
-   TEXT_FOR_ERROR(SOCEMFILE         , "Too many open files.")
-   TEXT_FOR_ERROR(SOCEPIPE          , "Broken pipe.")
-   TEXT_FOR_ERROR(SOCEWOULDBLOCK    , "Operation would block.")
-   TEXT_FOR_ERROR(SOCEINPROGRESS    , "Operation now in progress.")
-   TEXT_FOR_ERROR(SOCEALREADY       , "Operation already in progress.")
-   TEXT_FOR_ERROR(SOCENOTSOCK       , "Socket operation on non-socket.")
-   TEXT_FOR_ERROR(SOCEDESTADDRREQ   , "Destination address required.")
-   TEXT_FOR_ERROR(SOCEMSGSIZE       , "Message too long.")
-   TEXT_FOR_ERROR(SOCEPROTOTYPE     , "Protocol wrong type for socket.")
-   TEXT_FOR_ERROR(SOCENOPROTOOPT    , "Protocol not available.")
-   TEXT_FOR_ERROR(SOCEPROTONOSUPPORT, "Protocol not supported.")
-   TEXT_FOR_ERROR(SOCESOCKTNOSUPPORT, "Socket type not supported.")
-   TEXT_FOR_ERROR(SOCEOPNOTSUPP     , "Operation not supported.")
-   TEXT_FOR_ERROR(SOCEPFNOSUPPORT   , "Protocol family not supported.")
-   TEXT_FOR_ERROR(SOCEAFNOSUPPORT   , "Address family not supported by protocol family.")
-   TEXT_FOR_ERROR(SOCEADDRINUSE     , "Address already in use.")
-   TEXT_FOR_ERROR(SOCEADDRNOTAVAIL  , "Can't assign requested address.")
-   TEXT_FOR_ERROR(SOCENETDOWN       , "Network is down.")
-   TEXT_FOR_ERROR(SOCENETUNREACH    , "Network is unreachable.")
-   TEXT_FOR_ERROR(SOCENETRESET      , "Network dropped connection on reset.")
-   TEXT_FOR_ERROR(SOCECONNABORTED   , "Software caused connection abort.")
-   TEXT_FOR_ERROR(SOCECONNRESET     , "Connection reset by peer.")
-   TEXT_FOR_ERROR(SOCENOBUFS        , "No buffer space available.")
-   TEXT_FOR_ERROR(SOCEISCONN        , "Socket is already connected.")
-   TEXT_FOR_ERROR(SOCENOTCONN       , "Socket is not connected.")
-   TEXT_FOR_ERROR(SOCESHUTDOWN      , "Can't send after socket shutdown.")
-   TEXT_FOR_ERROR(SOCETOOMANYREFS   , "Too many references: can't splice.")
-   TEXT_FOR_ERROR(SOCETIMEDOUT      , "Operation timed out.")
-   TEXT_FOR_ERROR(SOCECONNREFUSED   , "Connection refused.")
-   TEXT_FOR_ERROR(SOCELOOP          , "Too many levels of symbolic links.")
-   TEXT_FOR_ERROR(SOCENAMETOOLONG   , "File name too long.")
-   TEXT_FOR_ERROR(SOCEHOSTDOWN      , "Host is down.")
-   TEXT_FOR_ERROR(SOCEHOSTUNREACH   , "No route to host.")
-   TEXT_FOR_ERROR(SOCENOTEMPTY      , "Directory not empty.")
-   TEXT_FOR_ERROR(SOCEOS2ERR        , "OS/2 Error.")
-
-   sprintf(tmp_buf, "(error number %d)", errcode);
-   return tmp_buf;
-}
-#endif /* def __OS2__ */
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/errlog.h b/external/privoxy/errlog.h
deleted file mode 100644
index 4906331..0000000
--- a/external/privoxy/errlog.h
+++ /dev/null
@@ -1,215 +0,0 @@
-#ifndef ERRLOG_H_INCLUDED
-#define ERRLOG_H_INCLUDED
-#define ERRLOG_H_VERSION "$Id: errlog.h,v 1.22 2009/02/09 21:21:15 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/errlog.h,v $
- *
- * Purpose     :  Log errors to a designated destination in an elegant,
- *                printf-like fashion.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: errlog.h,v $
- *    Revision 1.22  2009/02/09 21:21:15  fabiankeil
- *    Now that init_log_module() is called earlier, call show_version()
- *    later on from main() directly so it doesn't get called for --help
- *    or --version.
- *
- *    Revision 1.21  2008/12/14 15:46:22  fabiankeil
- *    Give crunched requests their own log level.
- *
- *    Revision 1.20  2008/03/27 18:27:23  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.19  2007/10/14 14:12:41  fabiankeil
- *    When in daemon mode, close stderr after the configuration file has been
- *    parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436.
- *
- *    Revision 1.18  2007/07/14 07:28:47  fabiankeil
- *    Add translation function for JB_ERR_FOO codes.
- *
- *    Revision 1.17  2007/03/31 13:33:28  fabiankeil
- *    Add alternative log_error() with timestamps
- *    that contain milliseconds and without using
- *    strcpy(), strcat() or sprintf().
- *
- *    Revision 1.16  2006/11/28 15:29:50  fabiankeil
- *    Define LOG_LEVEL_REDIRECTS independently of
- *    FEATURE_FAST_REDIRECTS. It is used by redirect{}
- *    as well.
- *
- *    Revision 1.15  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.13.2.1  2002/08/05 17:57:06  oes
- *    Cosmetic change
- *
- *    Revision 1.13  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.12  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.11  2002/03/06 23:02:57  jongfoster
- *    Removing tabs
- *
- *    Revision 1.10  2001/09/13 20:08:06  jongfoster
- *    Adding support for LOG_LEVEL_CGI
- *
- *    Revision 1.9  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.8  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.7  2001/07/19 19:02:53  haroon
- *    Added define for LOG_LEVEL_POPUPS
- *
- *    Revision 1.6  2001/07/13 13:59:22  oes
- *     - Added LOG_LEVEL_DEANIMATE
- *     - Changed LOG_LEVEL_CLF
- *     - Removed all #ifdef PCRS
- *
- *    Revision 1.5  2001/05/26 17:25:14  jongfoster
- *    Added support for CLF (Common Log Format) and fixed LOG_LEVEL_LOG
- *
- *    Revision 1.4  2001/05/25 21:56:06  jongfoster
- *    Added FIXME comment to (broken) LOG_LEVEL_LOG
- *
- *    Revision 1.3  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.2  2001/05/20 01:11:40  jongfoster
- *    Added support for LOG_LEVEL_FATAL
- *    Renamed LOG_LEVEL_FRC to LOG_LEVEL_FORCE,
- *    and LOG_LEVEL_REF to LOG_LEVEL_RE_FILTER
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:51  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Debug level for errors */
-
-/* XXX: Should be renamed. */
-#define LOG_LEVEL_GPC        0x0001
-#define LOG_LEVEL_CONNECT    0x0002
-#define LOG_LEVEL_IO         0x0004
-#define LOG_LEVEL_HEADER     0x0008
-#define LOG_LEVEL_LOG        0x0010
-#ifdef FEATURE_FORCE_LOAD
-#define LOG_LEVEL_FORCE      0x0020
-#endif /* def FEATURE_FORCE_LOAD */
-#define LOG_LEVEL_RE_FILTER  0x0040
-#define LOG_LEVEL_REDIRECTS  0x0080
-#define LOG_LEVEL_DEANIMATE  0x0100
-#define LOG_LEVEL_CLF        0x0200 /* Common Log File format */
-#define LOG_LEVEL_CRUNCH     0x0400
-#define LOG_LEVEL_CGI        0x0800 /* CGI / templates */
-
-/* Following are always on: */
-#define LOG_LEVEL_INFO    0x1000
-#define LOG_LEVEL_ERROR   0x2000
-#define LOG_LEVEL_FATAL   0x4000 /* Exits after writing log */
-
-extern void init_error_log(const char *prog_name, const char *logfname);
-extern void set_debug_level(int debuglevel);
-extern void disable_logging(void);
-extern void init_log_module(void);
-extern void show_version(const char *prog_name);
-extern void log_error(int loglevel, const char *fmt, ...);
-extern const char *jb_err_to_string(int error);
-
-/* Revision control strings from this header and associated .c file */
-extern const char errlog_rcs[];
-extern const char errlog_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef ERRLOG_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
-
diff --git a/external/privoxy/filters.c b/external/privoxy/filters.c
deleted file mode 100644
index 8fa1d4e..0000000
--- a/external/privoxy/filters.c
+++ /dev/null
@@ -1,2709 +0,0 @@
-const char filters_rcs[] = "$Id: filters.c,v 1.113 2009/03/08 14:19:23 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/filters.c,v $
- *
- * Purpose     :  Declares functions to parse/crunch headers and pages.
- *                Functions declared include:
- *                   `acl_addr', `add_stats', `block_acl', `block_imageurl',
- *                   `block_url', `url_actions', `domain_split',
- *                   `filter_popups', `forward_url', 'redirect_url',
- *                   `ij_untrusted_url', `intercept_url', `pcrs_filter_respose',
- *                   `ijb_send_banner', `trust_url', `gif_deanimate_response',
- *                   `execute_single_pcrs_command', `rewrite_url',
- *                   `get_last_url'
- *
- * Copyright   :  Written by and Copyright (C) 2001, 2004-2008 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: filters.c,v $
- *    Revision 1.113  2009/03/08 14:19:23  fabiankeil
- *    Fix justified (but harmless) compiler warnings
- *    on platforms where sizeof(int) < sizeof(long).
- *
- *    Revision 1.112  2009/03/01 18:28:23  fabiankeil
- *    Help clang understand that we aren't dereferencing
- *    NULL pointers here.
- *
- *    Revision 1.111  2008/12/04 18:13:46  fabiankeil
- *    Fix a cparser warning.
- *
- *    Revision 1.110  2008/11/10 16:40:25  fabiankeil
- *    Fix a gcc44 warning.
- *
- *    Revision 1.109  2008/11/08 15:48:41  fabiankeil
- *    Mention actual values when complaining about
- *    the chunk size exceeding the buffer size.
- *
- *    Revision 1.108  2008/05/21 15:35:08  fabiankeil
- *    - Mark csp as immutable for block_acl().
- *    - Remove an obsolete complaint about filter_popups().
- *
- *    Revision 1.107  2008/05/04 17:52:56  fabiankeil
- *    Adjust parse_http_url() call to new prototype.
- *
- *    Revision 1.106  2008/05/03 16:40:44  fabiankeil
- *    Change content_filters_enabled()'s parameter from
- *    csp->action to action so it can be also used in the
- *    CGI code. Don't bother checking if there are filters
- *    loaded, as that's somewhat besides the point.
- *
- *    Revision 1.105  2008/03/28 15:13:39  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.104  2008/03/27 18:27:24  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.103  2008/03/06 16:33:45  fabiankeil
- *    If limit-connect isn't used, don't limit CONNECT requests to port 443.
- *
- *    Revision 1.102  2008/03/01 14:00:44  fabiankeil
- *    Let the block action take the reason for the block
- *    as argument and show it on the "blocked" page.
- *
- *    Revision 1.101  2008/02/23 16:57:12  fabiankeil
- *    Rename url_actions() to get_url_actions() and let it
- *    use the standard parameter ordering.
- *
- *    Revision 1.100  2008/02/23 16:33:43  fabiankeil
- *    Let forward_url() use the standard parameter ordering
- *    and mark its second parameter immutable.
- *
- *    Revision 1.99  2008/02/03 13:57:58  fabiankeil
- *    Add SOCKS5 support for forward-override{}.
- *
- *    Revision 1.98  2008/01/04 17:43:45  fabiankeil
- *    Improve the warning messages that get logged if the action files
- *    "enable" filters but no filters of that type have been loaded.
- *
- *    Revision 1.97  2007/11/30 15:37:03  fabiankeil
- *    Use freez instead of free.
- *
- *    Revision 1.96  2007/10/19 16:53:28  fabiankeil
- *    Add helper function to check if any content filters are enabled.
- *
- *    Revision 1.95  2007/10/17 19:31:20  fabiankeil
- *    Omitting the zero chunk that ends the chunk transfer encoding seems
- *    to be the new black. Log the problem and continue filtering anyway.
- *
- *    Revision 1.94  2007/09/29 13:20:20  fabiankeil
- *    Remove two redundant and one useless log messages.
- *
- *    Revision 1.93  2007/09/29 10:21:16  fabiankeil
- *    - Move get_filter_function() from jcc.c to filters.c
- *      so the filter functions can be static.
- *    - Don't bother filtering body-less responses.
- *
- *    Revision 1.92  2007/09/28 16:38:55  fabiankeil
- *    - Execute content filters through execute_content_filter().
- *    - Add prepare_for_filtering() so filter functions don't have to
- *      care about de-chunking and decompression. As a side effect this enables
- *      decompression for gif_deanimate_response() and jpeg_inspect_response().
- *    - Change remove_chunked_transfer_coding()'s return type to jb_err.
- *      Some clowns feel like chunking empty responses in which case
- *      (size == 0) is valid but previously would be interpreted as error.
- *
- *    Revision 1.91  2007/09/02 15:31:20  fabiankeil
- *    Move match_portlist() from filter.c to urlmatch.c.
- *    It's used for url matching, not for filtering.
- *
- *    Revision 1.90  2007/09/02 12:44:17  fabiankeil
- *    Remove newline at the end of a log_error() message.
- *
- *    Revision 1.89  2007/08/05 13:42:23  fabiankeil
- *    #1763173 from Stefan Huehner: declare some more functions static.
- *
- *    Revision 1.88  2007/06/01 16:41:11  fabiankeil
- *    Add forward-override{} to change the forwarding settings through
- *    action sections. This is mainly interesting to forward different
- *    clients differently (for example based on User-Agent or request
- *    origin).
- *
- *    Revision 1.87  2007/04/30 15:53:10  fabiankeil
- *    Make sure filters with dynamic jobs actually use them.
- *
- *    Revision 1.86  2007/04/30 15:03:28  fabiankeil
- *    - Introduce dynamic pcrs jobs that can resolve variables.
- *    - Don't run redirect functions more than once,
- *      unless they are activated more than once.
- *
- *    Revision 1.85  2007/03/21 12:24:47  fabiankeil
- *    - Log the content size after decompression in decompress_iob()
- *      instead of pcrs_filter_response().
- *
- *    Revision 1.84  2007/03/20 15:16:34  fabiankeil
- *    Use dedicated header filter actions instead of abusing "filter".
- *    Replace "filter-client-headers" and "filter-client-headers"
- *    with "server-header-filter" and "client-header-filter".
- *
- *    Revision 1.83  2007/03/17 15:20:05  fabiankeil
- *    New config option: enforce-blocks.
- *
- *    Revision 1.82  2007/03/13 11:28:43  fabiankeil
- *    - Fix port handling in acl_addr() and use a temporary acl spec
- *      copy so error messages don't contain a truncated version.
- *    - Log size of iob before and after decompression.
- *
- *    Revision 1.81  2007/03/05 14:40:53  fabiankeil
- *    - Cosmetical changes for LOG_LEVEL_RE_FILTER messages.
- *    - Hide the "Go there anyway" link for blocked CONNECT
- *      requests where going there anyway doesn't work anyway.
- *
- *    Revision 1.80  2007/02/07 10:55:20  fabiankeil
- *    - Save the reason for generating http_responses.
- *    - Block (+block) with status code 403 instead of 404.
- *    - Use a different kludge to remember a failed decompression.
- *
- *    Revision 1.79  2007/01/31 16:21:38  fabiankeil
- *    Search for Max-Forwards headers case-insensitive,
- *    don't generate the "501 unsupported" message for invalid
- *    Max-Forwards values and don't increase negative ones.
- *
- *    Revision 1.78  2007/01/28 13:41:18  fabiankeil
- *    - Add HEAD support to finish_http_response.
- *    - Add error favicon to internal HTML error messages.
- *
- *    Revision 1.77  2007/01/12 15:36:44  fabiankeil
- *    Mark *csp as immutable for is_untrusted_url()
- *    and is_imageurl(). Closes FR 1237736.
- *
- *    Revision 1.76  2007/01/01 19:36:37  fabiankeil
- *    Integrate a modified version of Wil Mahan's
- *    zlib patch (PR #895531).
- *
- *    Revision 1.75  2006/12/29 18:30:46  fabiankeil
- *    Fixed gcc43 conversion warnings,
- *    changed sprintf calls to snprintf.
- *
- *    Revision 1.74  2006/12/24 17:37:38  fabiankeil
- *    Adjust comment in pcrs_filter_response()
- *    to recent pcrs changes. Hohoho.
- *
- *    Revision 1.73  2006/12/23 16:01:02  fabiankeil
- *    Don't crash if pcre returns an error code
- *    that pcrs didn't expect. Fixes BR 1621173.
- *
- *    Revision 1.72  2006/12/22 18:52:53  fabiankeil
- *    Modified is_untrusted_url to complain in case of
- *    write errors and to give a reason when adding new
- *    entries to the trustfile. Closes FR 1097611.
- *
- *    Revision 1.71  2006/12/22 14:24:52  fabiankeil
- *    Skip empty filter files in pcrs_filter_response,
- *    but don't ignore the ones that come afterwards.
- *    Fixes parts of BR 1619208.
- *
- *    Revision 1.70  2006/12/09 13:33:15  fabiankeil
- *    Added some sanity checks for get_last_url().
- *    Fixed possible segfault caused by my last commit.
- *
- *    Revision 1.69  2006/12/08 12:39:13  fabiankeil
- *    Let get_last_url() catch https URLs as well.
- *
- *    Revision 1.68  2006/12/05 14:45:48  fabiankeil
- *    Make sure get_last_url() behaves like advertised
- *    and fast-redirects{} can be combined with redirect{}.
- *
- *    Revision 1.67  2006/11/28 15:19:43  fabiankeil
- *    Implemented +redirect{s@foo@bar@} to generate
- *    a redirect based on a rewritten version of the
- *    original URL.
- *
- *    Revision 1.66  2006/09/23 13:26:38  roro
- *    Replace TABs by spaces in source code.
- *
- *    Revision 1.65  2006/09/21 12:54:43  fabiankeil
- *    Fix +redirect{}. Didn't work with -fast-redirects.
- *
- *    Revision 1.64  2006/08/31 10:55:49  fabiankeil
- *    Block requests for untrusted URLs with status
- *    code 403 instead of 200.
- *
- *    Revision 1.63  2006/08/31 10:11:28  fabiankeil
- *    Don't free p which is still in use and will be later
- *    freed by free_map(). Don't claim the referrer is unknown
- *    when the client didn't set one.
- *
- *    Revision 1.62  2006/08/14 00:27:47  david__schmidt
- *    Feature request 595948: Re-Filter logging in single line
- *
- *    Revision 1.61  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.60  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.58.2.9  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.58.2.8  2005/05/07 21:50:55  david__schmidt
- *    A few memory leaks plugged (mostly on error paths)
- *
- *    Revision 1.58.2.7  2004/10/03 12:53:32  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.58.2.6  2003/12/06 22:18:27  gliptak
- *    Correcting compile problem with FEATURE_IMAGE_BLOCKING
- *
- *    Revision 1.58.2.5  2003/11/11 13:10:31  oes
- *    Fixed bug #839859: "See why" link URL now gets url-encoded.
- *
- *    Revision 1.58.2.4  2003/02/28 12:52:45  oes
- *    Fixed a typo
- *
- *    Revision 1.58.2.3  2002/09/25 14:51:51  oes
- *    Added basic support for OPTIONS and TRACE HTTP methods:
- *    New function direct_response which handles OPTIONS and
- *    TRACE requests whose Max-Forwards header field is zero.
- *
- *    Revision 1.58.2.2  2002/08/01 17:18:28  oes
- *    Fixed BR 537651 / SR 579724 (MSIE image detect improper for IE/Mac)
- *
- *    Revision 1.58.2.1  2002/07/26 15:18:53  oes
- *    - Bugfix: Executing a filters without jobs no longer results in
- *      turing off *all* filters.
- *    - Security fix: Malicious web servers can't cause a seg fault
- *      through bogus chunk sizes anymore
- *
- *    Revision 1.58  2002/04/24 02:11:17  oes
- *    Jon's multiple AF patch: url_actions now evaluates rules
- *    from all AFs.
- *
- *    Revision 1.57  2002/04/08 20:38:34  swa
- *    fixed JB spelling
- *
- *    Revision 1.56  2002/04/05 15:51:24  oes
- *     - bugfix: error-pages now get correct request protocol
- *     - fix for invalid HTML in trust info
- *
- *    Revision 1.55  2002/04/02 16:13:51  oes
- *    Fix: No "Go there anyway" for SSL
- *
- *    Revision 1.54  2002/04/02 14:55:56  oes
- *    Bugfix: is_untrusted_url() now depends on FEATURE_TRUST, not FEATURE_COOKIE_JAR
- *
- *    Revision 1.53  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.52  2002/03/24 16:35:57  jongfoster
- *    Removing logo
- *
- *    Revision 1.51  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.50  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.49  2002/03/16 20:29:14  oes
- *    Cosmetics
- *
- *    Revision 1.48  2002/03/13 20:25:34  oes
- *    Better logging for content filters
- *
- *    Revision 1.47  2002/03/13 00:30:52  jongfoster
- *    Killing warnings
- *    Added option of always sending redirect for imageblock,
- *    currently disabled with #if 0.
- *
- *    Revision 1.46  2002/03/12 01:42:49  oes
- *    Introduced modular filters
- *
- *    Revision 1.45  2002/03/08 16:47:50  oes
- *    Added choice beween GIF and PNG built-in images
- *
- *    Revision 1.44  2002/03/07 03:49:31  oes
- *     - Fixed compiler warnings etc
- *     - Changed built-in images from GIF to PNG
- *       (with regard to Unisys patent issue)
- *     - Added a 4x4 pattern PNG which is less intrusive
- *       than the logo but also clearly marks the deleted banners
- *
- *    Revision 1.43  2002/01/22 23:51:59  jongfoster
- *    Replacing strsav() with the safer string_append().
- *
- *    Adding missing html_encode() to error message generators.  Where encoded
- *    and unencoded versions of a string were provided, removing the unencoded
- *    one.
- *
- *    Revision 1.42  2002/01/17 21:00:32  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Using a single, simple url_match(pattern,url) function - rather than
- *    the 3-line match routine which was repeated all over the place.
- *
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Using parse_http_url() to parse URLs without faking a HTTP
- *    request line for parse_http_request().
- *
- *    Revision 1.41  2001/11/13 00:14:07  jongfoster
- *    Fixing stupid bug now I've figured out what || means.
- *    (It always returns 0 or 1, not one of it's paramaters.)
- *
- *    Revision 1.40  2001/10/26 17:37:55  oes
- *    - Re-enabled Netscape 200/404 bug workaround in block_url():
- *      - Removed OS/2 special case
- *      - Made block_url() independant from sed() having been run
- *    - Made trust_url independant from sed() having been run
- *    - Made is_imageurl independant from sed() having been run.
- *      It now checks User-Agent: and Accept: by itself.
- *
- *
- *    Revision 1.39  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.38  2001/10/23 21:32:33  jongfoster
- *    Adding error-checking to selected functions
- *
- *    Revision 1.37  2001/10/22 15:33:56  david__schmidt
- *    Special-cased OS/2 out of the Netscape-abort-on-404-in-js problem in
- *    filters.c.  Added a FIXME in front of the offending code.  I'll gladly
- *    put in a better/more robust fix for all parties if one is presented...
- *    It seems that just returning 200 instead of 404 would pretty much fix
- *    it for everyone, but I don't know all the history of the problem.
- *
- *    Revision 1.36  2001/10/10 16:44:16  oes
- *    Added match_portlist function
- *
- *    Revision 1.35  2001/10/07 15:41:23  oes
- *    Replaced 6 boolean members of csp with one bitmap (csp->flags)
- *
- *    New function remove_chunked_transfer_coding that strips chunked
- *      transfer coding to plain and is called by pcrs_filter_response
- *      and gif_deanimate_response if neccessary
- *
- *    Improved handling of zero-change re_filter runs
- *
- *    pcrs_filter_response and gif_deanimate_response now remove
- *      chunked transfer codeing before processing the body.
- *
- *    Revision 1.34  2001/09/20 15:49:36  steudten
- *
- *    Fix BUG: Change int size to size_t size in pcrs_filter_response().
- *    See cgi.c fill_template().
- *
- *    Revision 1.33  2001/09/16 17:05:14  jongfoster
- *    Removing unused #include showarg.h
- *
- *    Revision 1.32  2001/09/16 13:21:27  jongfoster
- *    Changes to use new list functions.
- *
- *    Revision 1.31  2001/09/16 11:38:02  jongfoster
- *    Splitting fill_template() into 2 functions:
- *    template_load() loads the file
- *    template_fill() performs the PCRS regexps.
- *    This is because the CGI edit interface has a "table row"
- *    template which is used many times in the page - this
- *    change means it's only loaded from disk once.
- *
- *    Revision 1.30  2001/09/16 11:00:10  jongfoster
- *    New function alloc_http_response, for symmetry with free_http_response
- *
- *    Revision 1.29  2001/09/13 23:32:40  jongfoster
- *    Moving image data to cgi.c rather than cgi.h
- *    Fixing a GPF under Win32 (and any other OS that protects global
- *    constants from being written to).
- *
- *    Revision 1.28  2001/09/10 10:18:51  oes
- *    Silenced compiler warnings
- *
- *    Revision 1.27  2001/08/05 16:06:20  jongfoster
- *    Modifiying "struct map" so that there are now separate header and
- *    "map_entry" structures.  This means that functions which modify a
- *    map no longer need to return a pointer to the modified map.
- *    Also, it no longer reverses the order of the entries (which may be
- *    important with some advanced template substitutions).
- *
- *    Revision 1.26  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.25  2001/07/26 10:09:46  oes
- *    Made browser detection a little less naive
- *
- *    Revision 1.24  2001/07/25 17:22:51  oes
- *    Added workaround for Netscape bug that prevents display of page when loading a component fails.
- *
- *    Revision 1.23  2001/07/23 13:40:12  oes
- *    Fixed bug that caused document body to be dropped when pcrs joblist was empty.
- *
- *    Revision 1.22  2001/07/18 12:29:34  oes
- *    - Made gif_deanimate_response respect
- *      csp->action->string[ACTION_STRING_DEANIMATE]
- *    - Logging cosmetics
- *
- *    Revision 1.21  2001/07/13 13:59:53  oes
- *     - Introduced gif_deanimate_response which shares the
- *       generic content modification interface of pcrs_filter_response
- *       and acts as a wrapper to deanimate.c:gif_deanimate()
- *     - Renamed re_process_buffer to pcrs_filter_response
- *     - pcrs_filter_response now returns NULL on failiure
- *     - Removed all #ifdef PCRS
- *
- *    Revision 1.20  2001/07/01 17:01:04  oes
- *    Added comments and missing return statement in is_untrusted_url()
- *
- *    Revision 1.19  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.18  2001/06/29 13:27:38  oes
- *    - Cleaned up, renamed and reorderd functions
- *      and improved comments
- *
- *    - block_url:
- *      - Ported to CGI platform. Now delivers
- *        http_response or NULL
- *      - Unified HTML and GIF generation (moved image detection
- *        and GIF generation here from jcc.c:chat())
- *      - Fixed HTTP status to:
- *       -  403 (Forbidden) for the "blocked" HTML message
- *       -  200 (OK) for GIF answers
- *       -  302 (Redirect) for redirect to GIF
- *
- *    - trust_url:
- *      - Ported to CGI platform. Now delivers
- *        http_response or NULL
- *      - Separated detection of untrusted URL into
- *        (bool)is_untrusted_url
- *      - Added enforcement of untrusted requests
- *
- *    - Moved redirect_url() from cgi.c to here
- *      and ported it to the CGI platform
- *
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.17  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.16  2001/06/07 23:10:26  jongfoster
- *    Allowing unanchored domain patterns to back off and retry
- *    if they partially match.  Optimized right-anchored patterns.
- *    Moving ACL and forward files into config file.
- *    Replacing struct gateway with struct forward_spec
- *
- *    Revision 1.15  2001/06/03 19:12:00  oes
- *    extracted-CGI relevant stuff
- *
- *    Revision 1.14  2001/06/01 10:30:55  oes
- *    Added optional left-anchoring to domaincmp
- *
- *    Revision 1.13  2001/05/31 21:21:30  jongfoster
- *    Permissionsfile / actions file changes:
- *    - Changed "permission" to "action" throughout
- *    - changes to file format to allow string parameters
- *    - Moved helper functions to actions.c
- *
- *    Revision 1.12  2001/05/31 17:35:20  oes
- *
- *     - Enhanced domain part globbing with infix and prefix asterisk
- *       matching and optional unanchored operation
- *
- *    Revision 1.11  2001/05/29 11:53:23  oes
- *    "See why" link added to "blocked" page
- *
- *    Revision 1.10  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.9  2001/05/27 22:17:04  oes
- *
- *    - re_process_buffer no longer writes the modified buffer
- *      to the client, which was very ugly. It now returns the
- *      buffer, which it is then written by chat.
- *
- *    - content_length now adjusts the Content-Length: header
- *      for modified documents rather than crunch()ing it.
- *      (Length info in csp->content_length, which is 0 for
- *      unmodified documents)
- *
- *    - For this to work, sed() is called twice when filtering.
- *
- *    Revision 1.8  2001/05/26 17:13:28  jongfoster
- *    Filled in a function comment.
- *
- *    Revision 1.7  2001/05/26 15:26:15  jongfoster
- *    ACL feature now provides more security by immediately dropping
- *    connections from untrusted hosts.
- *
- *    Revision 1.6  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.5  2001/05/25 22:34:30  jongfoster
- *    Hard tabs->Spaces
- *
- *    Revision 1.4  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.3  2001/05/20 16:44:47  jongfoster
- *    Removing last hardcoded Junkbusters.com URLs.
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:52  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <string.h>
-#include <assert.h>
-
-#ifndef _WIN32
-#ifndef __OS2__
-#include <unistd.h>
-#endif /* ndef __OS2__ */
-#include <netinet/in.h>
-#else
-#include <winsock2.h>
-#endif /* ndef _WIN32 */
-
-#ifdef __OS2__
-#include <utils.h>
-#endif /* def __OS2__ */
-
-#include "project.h"
-#include "filters.h"
-#include "encode.h"
-#include "parsers.h"
-#include "ssplit.h"
-#include "errlog.h"
-#include "jbsockets.h"
-#include "miscutil.h"
-#include "actions.h"
-#include "cgi.h"
-#include "list.h"
-#include "deanimate.h"
-#include "urlmatch.h"
-#include "loaders.h"
-
-#ifdef _WIN32
-#include "win32.h"
-#endif
-
-const char filters_h_rcs[] = FILTERS_H_VERSION;
-
-/* Fix a problem with Solaris.  There should be no effect on other
- * platforms.
- * Solaris's isspace() is a macro which uses it's argument directly
- * as an array index.  Therefore we need to make sure that high-bit
- * characters generate +ve values, and ideally we also want to make
- * the argument match the declared parameter type of "int".
- */
-#define ijb_isdigit(__X) isdigit((int)(unsigned char)(__X))
-
-static jb_err remove_chunked_transfer_coding(char *buffer, size_t *size);
-static jb_err prepare_for_filtering(struct client_state *csp);
-
-#ifdef FEATURE_ACL
-/*********************************************************************
- *
- * Function    :  block_acl
- *
- * Description :  Block this request?
- *                Decide yes or no based on ACL file.
- *
- * Parameters  :
- *          1  :  dst = The proxy or gateway address this is going to.
- *                      Or NULL to check all possible targets.
- *          2  :  csp = Current client state (buffers, headers, etc...)
- *                      Also includes the client IP address.
- *
- * Returns     : 0 = FALSE (don't block) and 1 = TRUE (do block)
- *
- *********************************************************************/
-int block_acl(const struct access_control_addr *dst, const struct client_state *csp)
-{
-   struct access_control_list *acl = csp->config->acl;
-
-   /* if not using an access control list, then permit the connection */
-   if (acl == NULL)
-   {
-      return(0);
-   }
-
-   /* search the list */
-   while (acl != NULL)
-   {
-      if ((csp->ip_addr_long & acl->src->mask) == acl->src->addr)
-      {
-         if (dst == NULL)
-         {
-            /* Just want to check if they have any access */
-            if (acl->action == ACL_PERMIT)
-            {
-               return(0);
-            }
-         }
-         else if ( ((dst->addr & acl->dst->mask) == acl->dst->addr)
-           && ((dst->port == acl->dst->port) || (acl->dst->port == 0)))
-         {
-            if (acl->action == ACL_PERMIT)
-            {
-               return(0);
-            }
-            else
-            {
-               return(1);
-            }
-         }
-      }
-      acl = acl->next;
-   }
-
-   return(1);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  acl_addr
- *
- * Description :  Called from `load_config' to parse an ACL address.
- *
- * Parameters  :
- *          1  :  aspec = String specifying ACL address.
- *          2  :  aca = struct access_control_addr to fill in.
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int acl_addr(const char *aspec, struct access_control_addr *aca)
-{
-   int i, masklength;
-   long port;
-   char *p;
-   char *acl_spec = NULL;
-
-   masklength = 32;
-   port       =  0;
-
-   /*
-    * Use a temporary acl spec copy so we can log
-    * the unmodified original in case of parse errors.
-    */
-   acl_spec = strdup(aspec);
-   if (acl_spec == NULL)
-   {
-      /* XXX: This will be logged as parse error. */
-      return(-1);
-   }
-
-   if ((p = strchr(acl_spec, '/')) != NULL)
-   {
-      *p++ = '\0';
-      if (ijb_isdigit(*p) == 0)
-      {
-         freez(acl_spec);
-         return(-1);
-      }
-      masklength = atoi(p);
-   }
-
-   if ((masklength < 0) || (masklength > 32))
-   {
-      freez(acl_spec);
-      return(-1);
-   }
-
-   if ((p = strchr(acl_spec, ':')) != NULL)
-   {
-      char *endptr;
-
-      *p++ = '\0';
-      port = strtol(p, &endptr, 10);
-
-      if (port <= 0 || port > 65535 || *endptr != '\0')
-      {
-         freez(acl_spec);
-         return(-1);
-      }
-   }
-
-   aca->port = (unsigned long)port;
-
-   aca->addr = ntohl(resolve_hostname_to_ip(acl_spec));
-   freez(acl_spec);
-
-   if (aca->addr == INADDR_NONE)
-   {
-      /* XXX: This will be logged as parse error. */
-      return(-1);
-   }
-
-   /* build the netmask */
-   aca->mask = 0;
-   for (i=1; i <= masklength ; i++)
-   {
-      aca->mask |= (1U << (32 - i));
-   }
-
-   /* now mask off the host portion of the ip address
-    * (i.e. save on the network portion of the address).
-    */
-   aca->addr = aca->addr & aca->mask;
-
-   return(0);
-
-}
-#endif /* def FEATURE_ACL */
-
-
-/*********************************************************************
- *
- * Function    :  connect_port_is_forbidden
- *
- * Description :  Check to see if CONNECT requests to the destination
- *                port of this request are forbidden. The check is
- *                independend of the actual request method.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  True if yes, false otherwise.
- *
- *********************************************************************/
-int connect_port_is_forbidden(const struct client_state *csp)
-{
-   return ((csp->action->flags & ACTION_LIMIT_CONNECT) &&
-     !match_portlist(csp->action->string[ACTION_STRING_LIMIT_CONNECT],
-        csp->http->port));
-}
-
-
-/*********************************************************************
- *
- * Function    :  block_url
- *
- * Description :  Called from `chat'.  Check to see if we need to block this.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  NULL => unblocked, else HTTP block response
- *
- *********************************************************************/
-struct http_response *block_url(struct client_state *csp)
-{
-   struct http_response *rsp;
-   const char *new_content_type = NULL;
-
-   /*
-    * If it's not blocked, don't block it ;-)
-    */
-   if ((csp->action->flags & ACTION_BLOCK) == 0)
-   {
-      return NULL;
-   }
-   if (csp->action->flags & ACTION_REDIRECT)
-   {
-      log_error(LOG_LEVEL_ERROR, "redirect{} overruled by block.");     
-   }
-   /*
-    * Else, prepare a response
-    */
-   if (NULL == (rsp = alloc_http_response()))
-   {
-      return cgi_error_memory();
-   }
-
-   /*
-    * If it's an image-url, send back an image or redirect
-    * as specified by the relevant +image action
-    */
-#ifdef FEATURE_IMAGE_BLOCKING
-   if (((csp->action->flags & ACTION_IMAGE_BLOCKER) != 0)
-        && is_imageurl(csp))
-   {
-      char *p;
-      /* determine HOW images should be blocked */
-      p = csp->action->string[ACTION_STRING_IMAGE_BLOCKER];
-
-      if(csp->action->flags & ACTION_HANDLE_AS_EMPTY_DOCUMENT)
-      {
-         log_error(LOG_LEVEL_ERROR, "handle-as-empty-document overruled by handle-as-image.");
-      }
-#if 1 /* Two alternative strategies, use this one for now: */
-
-      /* and handle accordingly: */
-      if ((p == NULL) || (0 == strcmpic(p, "pattern")))
-      {
-         rsp->status = strdup("403 Request blocked by Privoxy");
-         if (rsp->status == NULL)
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-         rsp->body = bindup(image_pattern_data, image_pattern_length);
-         if (rsp->body == NULL)
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-         rsp->content_length = image_pattern_length;
-
-         if (enlist_unique_header(rsp->headers, "Content-Type", BUILTIN_IMAGE_MIMETYPE))
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-      }
-
-      else if (0 == strcmpic(p, "blank"))
-      {
-         rsp->status = strdup("403 Request blocked by Privoxy");
-         if (rsp->status == NULL)
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-         rsp->body = bindup(image_blank_data, image_blank_length);
-         if (rsp->body == NULL)
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-         rsp->content_length = image_blank_length;
-
-         if (enlist_unique_header(rsp->headers, "Content-Type", BUILTIN_IMAGE_MIMETYPE))
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-      }
-
-      else
-      {
-         rsp->status = strdup("302 Local Redirect from Privoxy");
-         if (rsp->status == NULL)
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-
-         if (enlist_unique_header(rsp->headers, "Location", p))
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-      }
-
-#else /* Following code is disabled for now */
-
-      /* and handle accordingly: */
-      if ((p == NULL) || (0 == strcmpic(p, "pattern")))
-      {
-         p = CGI_PREFIX "send-banner?type=pattern";
-      }
-      else if (0 == strcmpic(p, "blank"))
-      {
-         p = CGI_PREFIX "send-banner?type=blank";
-      }
-      rsp->status = strdup("302 Local Redirect from Privoxy");
-      if (rsp->status == NULL)
-      {
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-
-      if (enlist_unique_header(rsp->headers, "Location", p))
-      {
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-#endif /* Preceeding code is disabled for now */
-   }
-   else if(csp->action->flags & ACTION_HANDLE_AS_EMPTY_DOCUMENT)
-   {
-     /*
-      *  Send empty document.               
-      */
-      new_content_type = csp->action->string[ACTION_STRING_CONTENT_TYPE];
-
-      freez(rsp->body);
-      rsp->body = strdup(" ");
-      rsp->content_length = 1;
-
-      rsp->status = strdup("403 Request blocked by Privoxy");
-      if (rsp->status == NULL)
-      {
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-      if (new_content_type != 0)
-      {
-         log_error(LOG_LEVEL_HEADER, "Overwriting Content-Type with %s", new_content_type);
-         if (enlist_unique_header(rsp->headers, "Content-Type", new_content_type))
-         {
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-      }
-   }
-   else
-#endif /* def FEATURE_IMAGE_BLOCKING */
-
-   /*
-    * Else, generate an HTML "blocked" message:
-    */
-   {
-      jb_err err;
-      struct map * exports;
-      char *p;
-
-      /*
-       * Workaround for stupid Netscape bug which prevents
-       * pages from being displayed if loading a referenced
-       * JavaScript or style sheet fails. So make it appear
-       * as if it succeeded.
-       */
-      if ( NULL != (p = get_header_value(csp->headers, "User-Agent:"))
-           && !strncmpic(p, "mozilla", 7) /* Catch Netscape but */
-           && !strstr(p, "Gecko")         /* save Mozilla, */
-           && !strstr(p, "compatible")    /* MSIE */
-           && !strstr(p, "Opera"))        /* and Opera. */
-      {
-         rsp->status = strdup("200 Request for blocked URL");
-      }
-      else
-      {
-         rsp->status = strdup("403 Request for blocked URL");
-      }
-
-      if (rsp->status == NULL)
-      {
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-
-      exports = default_exports(csp, NULL);
-      if (exports == NULL)
-      {
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-
-#ifdef FEATURE_FORCE_LOAD
-      err = map(exports, "force-prefix", 1, FORCE_PREFIX, 1);
-      /*
-       * Export the force conditional block killer if
-       *
-       * - Privoxy was compiled without FEATURE_FORCE_LOAD, or
-       * - Privoxy is configured to enforce blocks, or
-       * - it's a CONNECT request and enforcing wouldn't work anyway.
-       */
-      if ((csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
-       || (0 == strcmpic(csp->http->gpc, "connect")))
-#endif /* ndef FEATURE_FORCE_LOAD */
-      {
-         err = map_block_killer(exports, "force-support");
-      }
-
-      if (!err) err = map(exports, "protocol", 1, csp->http->ssl ? "https://"; : "http://";, 1);
-      if (!err) err = map(exports, "hostport", 1, html_encode(csp->http->hostport), 0);
-      if (!err) err = map(exports, "path", 1, html_encode(csp->http->path), 0);
-      if (!err) err = map(exports, "path-ue", 1, url_encode(csp->http->path), 0);
-      if (!err)
-      {
-         const char *block_reason;
-         if (csp->action->string[ACTION_STRING_BLOCK] != NULL)
-         {
-            block_reason = csp->action->string[ACTION_STRING_BLOCK];
-         }
-         else
-         {
-            assert(connect_port_is_forbidden(csp));
-            block_reason = "Forbidden CONNECT port.";
-         }
-         err = map(exports, "block-reason", 1, html_encode(block_reason), 0);
-      }
-      if (err)
-      {
-         free_map(exports);
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-
-      err = template_fill_for_cgi(csp, "blocked", exports, rsp);
-      if (err)
-      {
-         free_http_response(rsp);
-         return cgi_error_memory();
-      }
-   }
-   rsp->reason = RSP_REASON_BLOCKED;
-
-   return finish_http_response(csp, rsp);
-
-}
-
-
-#ifdef FEATURE_TRUST
-/*********************************************************************
- *
- * Function    :  trust_url FIXME: I should be called distrust_url
- *
- * Description :  Calls is_untrusted_url to determine if the URL is trusted
- *                and if not, returns a HTTP 403 response with a reject message.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  NULL => trusted, else http_response.
- *
- *********************************************************************/
-struct http_response *trust_url(struct client_state *csp)
-{
-   struct http_response *rsp;
-   struct map * exports;
-   char buf[BUFFER_SIZE];
-   char *p;
-   struct url_spec **tl;
-   struct url_spec *t;
-   jb_err err;
-
-   /*
-    * Don't bother to work on trusted URLs
-    */
-   if (!is_untrusted_url(csp))
-   {
-      return NULL;
-   }
-
-   /*
-    * Else, prepare a response:
-    */
-   if (NULL == (rsp = alloc_http_response()))
-   {
-      return cgi_error_memory();
-   }
-
-   rsp->status = strdup("403 Request blocked by Privoxy");
-   exports = default_exports(csp, NULL);
-   if (exports == NULL || rsp->status == NULL)
-   {
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   /*
-    * Export the protocol, host, port, and referrer information
-    */
-   err = map(exports, "hostport", 1, csp->http->hostport, 1);
-   if (!err) err = map(exports, "protocol", 1, csp->http->ssl ? "https://"; : "http://";, 1); 
-   if (!err) err = map(exports, "path", 1, csp->http->path, 1);
-
-   if (NULL != (p = get_header_value(csp->headers, "Referer:")))
-   {
-      if (!err) err = map(exports, "referrer", 1, html_encode(p), 0);
-   }
-   else
-   {
-      if (!err) err = map(exports, "referrer", 1, "none set", 1);
-   }
-
-   if (err)
-   {
-      free_map(exports);
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   /*
-    * Export the trust list
-    */
-   p = strdup("");
-   for (tl = csp->config->trust_list; (t = *tl) != NULL ; tl++)
-   {
-      snprintf(buf, sizeof(buf), "<li>%s</li>\n", t->spec);
-      string_append(&p, buf);
-   }
-   err = map(exports, "trusted-referrers", 1, p, 0);
-
-   if (err)
-   {
-      free_map(exports);
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   /*
-    * Export the trust info, if available
-    */
-   if (csp->config->trust_info->first)
-   {
-      struct list_entry *l;
-
-      p = strdup("");
-      for (l = csp->config->trust_info->first; l ; l = l->next)
-      {
-         snprintf(buf, sizeof(buf), "<li> <a href=\"%s\">%s</a><br>\n", l->str, l->str);
-         string_append(&p, buf);
-      }
-      err = map(exports, "trust-info", 1, p, 0);
-   }
-   else
-   {
-      err = map_block_killer(exports, "have-trust-info");
-   }
-
-   if (err)
-   {
-      free_map(exports);
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   /*
-    * Export the force conditional block killer if
-    *
-    * - Privoxy was compiled without FEATURE_FORCE_LOAD, or
-    * - Privoxy is configured to enforce blocks, or
-    * - it's a CONNECT request and enforcing wouldn't work anyway.
-    */
-#ifdef FEATURE_FORCE_LOAD
-   if ((csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
-    || (0 == strcmpic(csp->http->gpc, "connect")))
-   {
-      err = map_block_killer(exports, "force-support");
-   }
-   else
-   {
-      err = map(exports, "force-prefix", 1, FORCE_PREFIX, 1);
-   }
-#else /* ifndef FEATURE_FORCE_LOAD */
-   err = map_block_killer(exports, "force-support");
-#endif /* ndef FEATURE_FORCE_LOAD */
-
-   if (err)
-   {
-      free_map(exports);
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-
-   /*
-    * Build the response
-    */
-   err = template_fill_for_cgi(csp, "untrusted", exports, rsp);
-   if (err)
-   {
-      free_http_response(rsp);
-      return cgi_error_memory();
-   }
-   rsp->reason = RSP_REASON_UNTRUSTED;
-
-   return finish_http_response(csp, rsp);
-}
-#endif /* def FEATURE_TRUST */
-
-
-/*********************************************************************
- *
- * Function    :  compile_dynamic_pcrs_job_list
- *
- * Description :  Compiles a dynamic pcrs job list (one with variables
- *                resolved at request time)
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  b = The filter list to compile
- *
- * Returns     :  NULL in case of errors, otherwise the
- *                pcrs job list.  
- *
- *********************************************************************/
-pcrs_job *compile_dynamic_pcrs_job_list(const struct client_state *csp, const struct re_filterfile_spec *b)
-{
-   struct list_entry *pattern;
-   pcrs_job *job_list = NULL;
-   pcrs_job *dummy = NULL;
-   pcrs_job *lastjob = NULL;
-   int error = 0;
-
-   const struct pcrs_variable variables[] =
-   {
-      {"url",    csp->http->url,   1},
-      {"path",   csp->http->path,  1},
-      {"host",   csp->http->host,  1},
-      {"origin", csp->ip_addr_str, 1},
-      {NULL,     NULL,             1}
-   };
-
-   for (pattern = b->patterns->first; pattern != NULL; pattern = pattern->next)
-   {
-      assert(pattern->str != NULL);
-
-      dummy = pcrs_compile_dynamic_command(pattern->str, variables, &error);
-      if (NULL == dummy)
-      {
-         assert(error < 0);
-         log_error(LOG_LEVEL_ERROR,
-            "Adding filter job \'%s\' to dynamic filter %s failed: %s",
-            pattern->str, b->name, pcrs_strerror(error));
-         continue;
-      }
-      else
-      {
-         if (error == PCRS_WARN_TRUNCATION)
-         {
-            log_error(LOG_LEVEL_ERROR,
-               "At least one of the variables in \'%s\' had to "
-               "be truncated before compilation", pattern->str);
-         }
-         if (job_list == NULL)
-         {
-            job_list = dummy;
-         }
-         else
-         {
-            lastjob->next = dummy;
-         }
-         lastjob = dummy;
-      }
-   }
-
-   return job_list;
-}
-
-
-/*********************************************************************
- *
- * Function    :  rewrite_url
- *
- * Description :  Rewrites a URL with a single pcrs command
- *                and returns the result if it differs from the
- *                original and isn't obviously invalid.
- *
- * Parameters  :
- *          1  :  old_url = URL to rewrite.
- *          2  :  pcrs_command = pcrs command formatted as string (s@foo@bar@)
- *
- *
- * Returns     :  NULL if the pcrs_command didn't change the url, or 
- *                the result of the modification.
- *
- *********************************************************************/
-char *rewrite_url(char *old_url, const char *pcrs_command)
-{
-   char *new_url = NULL;
-   int hits;
-
-   assert(old_url);
-   assert(pcrs_command);
-
-   new_url = pcrs_execute_single_command(old_url, pcrs_command, &hits);
-
-   if (hits == 0)
-   {
-      log_error(LOG_LEVEL_REDIRECTS,
-         "pcrs command \"%s\" didn't change \"%s\".",
-         pcrs_command, old_url);
-      freez(new_url);
-   }
-   else if (hits < 0)
-   {
-      log_error(LOG_LEVEL_REDIRECTS,
-         "executing pcrs command \"%s\" to rewrite %s failed: %s",
-         pcrs_command, old_url, pcrs_strerror(hits));
-      freez(new_url);
-   }
-   else if (strncmpic(new_url, "http://";, 7) && strncmpic(new_url, "https://";, 8))
-   {
-      log_error(LOG_LEVEL_ERROR,
-         "pcrs command \"%s\" changed \"%s\" to \"%s\" (%u hi%s), "
-         "but the result doesn't look like a valid URL and will be ignored.",
-         pcrs_command, old_url, new_url, hits, (hits == 1) ? "t" : "ts");
-      freez(new_url);
-   }
-   else
-   {
-      log_error(LOG_LEVEL_REDIRECTS,
-         "pcrs command \"%s\" changed \"%s\" to \"%s\" (%u hi%s).",
-         pcrs_command, old_url, new_url, hits, (hits == 1) ? "t" : "ts");
-   }
-
-   return new_url;
-
-}
-
-
-#ifdef FEATURE_FAST_REDIRECTS
-/*********************************************************************
- *
- * Function    :  get_last_url
- *
- * Description :  Search for the last URL inside a string.
- *                If the string already is a URL, it will
- *                be the first URL found.
- *
- * Parameters  :
- *          1  :  subject = the string to check
- *          2  :  redirect_mode = +fast-redirect{} mode 
- *
- * Returns     :  NULL if no URL was found, or
- *                the last URL found.
- *
- *********************************************************************/
-char *get_last_url(char *subject, const char *redirect_mode)
-{
-   char *new_url = NULL;
-   char *tmp;
-
-   assert(subject);
-   assert(redirect_mode);
-
-   subject = strdup(subject);
-   if (subject == NULL)
-   {
-      log_error(LOG_LEVEL_ERROR, "Out of memory while searching for redirects.");
-      return NULL;
-   }
-
-   if (0 == strcmpic(redirect_mode, "check-decoded-url"))
-   {  
-      log_error(LOG_LEVEL_REDIRECTS, "Decoding \"%s\" if necessary.", subject);
-      new_url = url_decode(subject);
-      if (new_url != NULL)
-      {
-         freez(subject);
-         subject = new_url;
-      }
-      else
-      {
-         log_error(LOG_LEVEL_ERROR, "Unable to decode \"%s\".", subject);
-      }
-   }
-
-   log_error(LOG_LEVEL_REDIRECTS, "Checking \"%s\" for redirects.", subject);
-
-   /*
-    * Find the last URL encoded in the request
-    */
-   tmp = subject;
-   while ((tmp = strstr(tmp, "http://";)) != NULL)
-   {
-      new_url = tmp++;
-   }
-   tmp = (new_url != NULL) ? new_url : subject;
-   while ((tmp = strstr(tmp, "https://";)) != NULL)
-   {
-      new_url = tmp++;
-   }
-
-   if ((new_url != NULL)
-      && (  (new_url != subject)
-         || (0 == strncmpic(subject, "http://";, 7))
-         || (0 == strncmpic(subject, "https://";, 8))
-         ))
-   {
-      /*
-       * Return new URL if we found a redirect 
-       * or if the subject already was a URL.
-       *
-       * The second case makes sure that we can
-       * chain get_last_url after another redirection check
-       * (like rewrite_url) without losing earlier redirects.
-       */
-      new_url = strdup(new_url);
-      freez(subject);
-      return new_url;
-   }
-
-   freez(subject);
-   return NULL;
-
-}
-#endif /* def FEATURE_FAST_REDIRECTS */
-
-
-/*********************************************************************
- *
- * Function    :  redirect_url
- *
- * Description :  Checks if Privoxy should answer the request with
- *                a HTTP redirect and generates the redirect if
- *                necessary.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  NULL if the request can pass, HTTP redirect otherwise.
- *
- *********************************************************************/
-struct http_response *redirect_url(struct client_state *csp)
-{
-   struct http_response *rsp;
-#ifdef FEATURE_FAST_REDIRECTS
-   /*
-    * XXX: Do we still need FEATURE_FAST_REDIRECTS
-    * as compile-time option? The user can easily disable
-    * it in his action file.
-    */
-   char * redirect_mode;
-#endif /* def FEATURE_FAST_REDIRECTS */
-   char *old_url = NULL;
-   char *new_url = NULL;
-   char *redirection_string;
-
-   if ((csp->action->flags & ACTION_REDIRECT))
-   {
-      redirection_string = csp->action->string[ACTION_STRING_REDIRECT];
-
-      /*
-       * If the redirection string begins with 's',
-       * assume it's a pcrs command, otherwise treat it as
-       * properly formatted URL and use it for the redirection
-       * directly.
-       *
-       * According to RFC 2616 section 14.30 the URL
-       * has to be absolute and if the user tries:
-       * +redirect{shit/this/will/be/parsed/as/pcrs_command.html}
-       * she would get undefined results anyway.
-       *
-       */
-
-      if (*redirection_string == 's')
-      {
-         old_url = csp->http->url;
-         new_url = rewrite_url(old_url, redirection_string);
-      }
-      else
-      {
-         log_error(LOG_LEVEL_REDIRECTS,
-            "No pcrs command recognized, assuming that \"%s\" is already properly formatted.",
-            redirection_string);
-         new_url = strdup(redirection_string);
-      }
-   }
-
-#ifdef FEATURE_FAST_REDIRECTS
-   if ((csp->action->flags & ACTION_FAST_REDIRECTS))
-   {
-      redirect_mode = csp->action->string[ACTION_STRING_FAST_REDIRECTS];
-
-      /*
-       * If it exists, use the previously rewritten URL as input
-       * otherwise just use the old path.
-       */
-      old_url = (new_url != NULL) ? new_url : strdup(csp->http->path);
-      new_url = get_last_url(old_url, redirect_mode);
-      freez(old_url);
-   }
-
-   /*
-    * Disable redirect checkers, so that they
-    * will be only run more than once if the user
-    * also enables them through tags.
-    *
-    * From a performance point of view
-    * it doesn't matter, but the duplicated
-    * log messages are annoying.
-    */
-   csp->action->flags &= ~ACTION_FAST_REDIRECTS;
-#endif /* def FEATURE_FAST_REDIRECTS */
-   csp->action->flags &= ~ACTION_REDIRECT;
-
-   /* Did any redirect action trigger? */   
-   if (new_url)
-   {
-      if (0 == strcmpic(new_url, csp->http->url))
-      {
-         log_error(LOG_LEVEL_ERROR,
-            "New URL \"%s\" and old URL \"%s\" are the same. Redirection loop prevented.",
-            csp->http->url, new_url);
-            freez(new_url);
-      }
-      else
-      {
-         log_error(LOG_LEVEL_REDIRECTS, "New URL is: %s", new_url);
-
-         if (NULL == (rsp = alloc_http_response()))
-         {
-            freez(new_url);
-            return cgi_error_memory();
-         }
-
-         if ( enlist_unique_header(rsp->headers, "Location", new_url)
-           || (NULL == (rsp->status = strdup("302 Local Redirect from Privoxy"))) )
-         {
-            freez(new_url);
-            free_http_response(rsp);
-            return cgi_error_memory();
-         }
-         rsp->reason = RSP_REASON_REDIRECTED;
-         freez(new_url);
-
-         return finish_http_response(csp, rsp);
-      }
-   }
-
-   /* Only reached if no redirect is required */
-   return NULL;
-
-}
-
-
-#ifdef FEATURE_IMAGE_BLOCKING
-/*********************************************************************
- *
- * Function    :  is_imageurl
- *
- * Description :  Given a URL, decide whether it is an image or not,
- *                using either the info from a previous +image action
- *                or, #ifdef FEATURE_IMAGE_DETECT_MSIE, and the browser
- *                is MSIE and not on a Mac, tell from the browser's accept
- *                header.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  True (nonzero) if URL is an image, false (0)
- *                otherwise
- *
- *********************************************************************/
-int is_imageurl(const struct client_state *csp)
-{
-#ifdef FEATURE_IMAGE_DETECT_MSIE
-   char *tmp;
-
-   tmp = get_header_value(csp->headers, "User-Agent:");
-   if (tmp && strstr(tmp, "MSIE") && !strstr(tmp, "Mac_"))
-   {
-      tmp = get_header_value(csp->headers, "Accept:");
-      if (tmp && strstr(tmp, "image/gif"))
-      {
-         /* Client will accept HTML.  If this seems counterintuitive,
-          * blame Microsoft.
-          */
-         return(0);
-      }
-      else
-      {
-         return(1);
-      }
-   }
-#endif /* def FEATURE_IMAGE_DETECT_MSIE */
-
-   return ((csp->action->flags & ACTION_IMAGE) != 0);
-
-}
-#endif /* def FEATURE_IMAGE_BLOCKING */
-
-
-#ifdef FEATURE_TRUST
-/*********************************************************************
- *
- * Function    :  is_untrusted_url
- *
- * Description :  Should we "distrust" this URL (and block it)?
- *
- *                Yes if it matches a line in the trustfile, or if the
- *                    referrer matches a line starting with "+" in the
- *                    trustfile.
- *                No  otherwise.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  0 => trusted, 1 => untrusted
- *
- *********************************************************************/
-int is_untrusted_url(const struct client_state *csp)
-{
-   struct file_list *fl;
-   struct block_spec *b;
-   struct url_spec **trusted_url;
-   struct http_request rhttp[1];
-   const char * referer;
-   jb_err err;
-
-   /*
-    * If we don't have a trustlist, we trust everybody
-    */
-   if (((fl = csp->tlist) == NULL) || ((b  = fl->f) == NULL))
-   {
-      return 0;
-   }
-
-   memset(rhttp, '\0', sizeof(*rhttp));
-
-   /*
-    * Do we trust the request URL itself?
-    */
-   for (b = b->next; b ; b = b->next)
-   {
-      if (url_match(b->url, csp->http))
-      {
-         return b->reject;
-      }
-   }
-
-   if (NULL == (referer = get_header_value(csp->headers, "Referer:")))
-   {
-      /* no referrer was supplied */
-      return 1;
-   }
-
-
-   /*
-    * If not, do we maybe trust its referrer?
-    */
-   err = parse_http_url(referer, rhttp, REQUIRE_PROTOCOL);
-   if (err)
-   {
-      return 1;
-   }
-
-   for (trusted_url = csp->config->trust_list; *trusted_url != NULL; trusted_url++)
-   {
-      if (url_match(*trusted_url, rhttp))
-      {
-         /* if the URL's referrer is from a trusted referrer, then
-          * add the target spec to the trustfile as an unblocked
-          * domain and return 0 (which means it's OK).
-          */
-
-         FILE *fp;
-
-         if (NULL != (fp = fopen(csp->config->trustfile, "a")))
-         {
-            char * path;
-            char * path_end;
-            char * new_entry = strdup("~");
-
-            string_append(&new_entry, csp->http->hostport);
-
-            path = csp->http->path;
-            if ( (path[0] == '/')
-              && (path[1] == '~')
-              && ((path_end = strchr(path + 2, '/')) != NULL))
-            {
-               /* since this path points into a user's home space
-                * be sure to include this spec in the trustfile.
-                */
-               long path_len = path_end - path; /* save offset */
-               path = strdup(path); /* Copy string */
-               if (path != NULL)
-               {
-                  path_end = path + path_len; /* regenerate ptr to new buffer */
-                  *(path_end + 1) = '\0'; /* Truncate path after '/' */
-               }
-               string_join(&new_entry, path);
-            }
-
-            /*
-             * Give a reason for generating this entry.
-             */
-            string_append(&new_entry, " # Trusted referrer was: ");
-            string_append(&new_entry, referer);
-
-            if (new_entry != NULL)
-            {
-               if (-1 == fprintf(fp, "%s\n", new_entry))
-               {
-                  log_error(LOG_LEVEL_ERROR, "Failed to append \'%s\' to trustfile \'%s\': %E",
-                     new_entry, csp->config->trustfile);
-               }
-               freez(new_entry);
-            }
-            else
-            {
-               /* FIXME: No way to handle out-of memory, so mostly ignoring it */
-               log_error(LOG_LEVEL_ERROR, "Out of memory adding pattern to trust file");
-            }
-
-            fclose(fp);
-         }
-         else
-         {
-            log_error(LOG_LEVEL_ERROR, "Failed to append new entry for \'%s\' to trustfile \'%s\': %E",
-               csp->http->hostport, csp->config->trustfile);
-         }
-         return 0;
-      }
-   }
-
-   return 1;
-}
-#endif /* def FEATURE_TRUST */
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_filter_response
- *
- * Description :  Execute all text substitutions from all applying
- *                +filter actions on the text buffer that's been
- *                accumulated in csp->iob->buf.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  a pointer to the (newly allocated) modified buffer.
- *                or NULL if there were no hits or something went wrong
- *
- *********************************************************************/
-static char *pcrs_filter_response(struct client_state *csp)
-{
-   int hits=0;
-   size_t size, prev_size;
-
-   char *old = NULL;
-   char *new = NULL;
-   pcrs_job *job;
-
-   struct file_list *fl;
-   struct re_filterfile_spec *b;
-   struct list_entry *filtername;
-
-   int i, found_filters = 0;
-
-   /* 
-    * Sanity first
-    */
-   if (csp->iob->cur >= csp->iob->eod)
-   {
-      return(NULL);
-   }
-
-   /*
-    * Need to check the set of re_filterfiles...
-    */
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      fl = csp->rlist[i];
-      if (NULL != fl)
-      {
-         if (NULL != fl->f)
-         {
-           found_filters = 1;
-           break;
-         }
-      }
-   }
-
-   if (0 == found_filters)
-   {
-      log_error(LOG_LEVEL_ERROR, "Inconsistent configuration: "
-         "content filtering enabled, but no content filters available.");
-      return(NULL);
-   }
-
-   size = (size_t)(csp->iob->eod - csp->iob->cur);
-   old = csp->iob->cur;
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-     fl = csp->rlist[i];
-     if ((NULL == fl) || (NULL == fl->f))
-     {
-        /*
-         * Either there are no filter files
-         * left, or this filter file just
-         * contains no valid filters.
-         *
-         * Continue to be sure we don't miss
-         * valid filter files that are chained
-         * after empty or invalid ones.
-         */
-        continue;
-     }
-   /*
-    * For all applying +filter actions, look if a filter by that
-    * name exists and if yes, execute it's pcrs_joblist on the
-    * buffer.
-    */
-   for (b = fl->f; b; b = b->next)
-   {
-      if (b->type != FT_CONTENT_FILTER)
-      {
-         /* Skip header filters */
-         continue;
-      }
-
-      for (filtername = csp->action->multi[ACTION_MULTI_FILTER]->first;
-           filtername ; filtername = filtername->next)
-      {
-         if (strcmp(b->name, filtername->str) == 0)
-         {
-            int current_hits = 0; /* Number of hits caused by this filter */
-            int job_number   = 0; /* Which job we're currently executing  */
-            int job_hits     = 0; /* How many hits the current job caused */
-            pcrs_job *joblist = b->joblist;
-
-            if (b->dynamic) joblist = compile_dynamic_pcrs_job_list(csp, b);
-
-            if (NULL == joblist)
-            {
-               log_error(LOG_LEVEL_RE_FILTER, "Filter %s has empty joblist. Nothing to do.", b->name);
-               continue;
-            }
-
-            prev_size = size;
-            /* Apply all jobs from the joblist */
-            for (job = joblist; NULL != job; job = job->next)
-            {
-               job_number++;
-               job_hits = pcrs_execute(job, old, size, &new, &size);
-
-               if (job_hits >= 0)
-               {
-                  /*
-                   * That went well. Continue filtering
-                   * and use the result of this job as
-                   * input for the next one.
-                   */
-                  current_hits += job_hits;
-                  if (old != csp->iob->cur)
-                  {
-                     freez(old);
-                  }
-                  old = new;
-               }
-               else
-               {
-                  /*
-                   * This job caused an unexpected error. Inform the user
-                   * and skip the rest of the jobs in this filter. We could
-                   * continue with the next job, but usually the jobs
-                   * depend on each other or are similar enough to
-                   * fail for the same reason.
-                   *
-                   * At the moment our pcrs expects the error codes of pcre 3.4,
-                   * but newer pcre versions can return additional error codes.
-                   * As a result pcrs_strerror()'s error message might be
-                   * "Unknown error ...", therefore we print the numerical value
-                   * as well.
-                   *
-                   * XXX: Is this important enough for LOG_LEVEL_ERROR or
-                   * should we use LOG_LEVEL_RE_FILTER instead?
-                   */
-                  log_error(LOG_LEVEL_ERROR, "Skipped filter \'%s\' after job number %u: %s (%d)",
-                     b->name, job_number, pcrs_strerror(job_hits), job_hits);
-                  break;
-               }
-            }
-
-            if (b->dynamic) pcrs_free_joblist(joblist);
-
-            log_error(LOG_LEVEL_RE_FILTER,
-               "filtering %s%s (size %d) with \'%s\' produced %d hits (new size %d).",
-               csp->http->hostport, csp->http->path, prev_size, b->name, current_hits, size);
-
-            hits += current_hits;
-         }
-      }
-   }
-   }
-
-   /*
-    * If there were no hits, destroy our copy and let
-    * chat() use the original in csp->iob
-    */
-   if (!hits)
-   {
-      freez(new);
-      return(NULL);
-   }
-
-   csp->flags |= CSP_FLAG_MODIFIED;
-   csp->content_length = size;
-   IOB_RESET(csp);
-
-   return(new);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  gif_deanimate_response
- *
- * Description :  Deanimate the GIF image that has been accumulated in
- *                csp->iob->buf, set csp->content_length to the modified
- *                size and raise the CSP_FLAG_MODIFIED flag.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  a pointer to the (newly allocated) modified buffer.
- *                or NULL in case something went wrong.
- *
- *********************************************************************/
-static char *gif_deanimate_response(struct client_state *csp)
-{
-   struct binbuffer *in, *out;
-   char *p;
-   size_t size;
-
-   size = (size_t)(csp->iob->eod - csp->iob->cur);
-
-   if (  (NULL == (in =  (struct binbuffer *)zalloc(sizeof *in )))
-      || (NULL == (out = (struct binbuffer *)zalloc(sizeof *out))) )
-   {
-      log_error(LOG_LEVEL_DEANIMATE, "failed! (no mem)");
-      return NULL;
-   }
-
-   in->buffer = csp->iob->cur;
-   in->size = size;
-
-   if (gif_deanimate(in, out, strncmp("last", csp->action->string[ACTION_STRING_DEANIMATE], 4)))
-   {
-      log_error(LOG_LEVEL_DEANIMATE, "failed! (gif parsing)");
-      freez(in);
-      buf_free(out);
-      return(NULL);
-   }
-   else
-   {
-      if ((int)size == out->offset)
-      {
-         log_error(LOG_LEVEL_DEANIMATE, "GIF not changed.");
-      }
-      else
-      {
-         log_error(LOG_LEVEL_DEANIMATE, "Success! GIF shrunk from %d bytes to %d.", size, out->offset);
-      }
-      csp->content_length = out->offset;
-      csp->flags |= CSP_FLAG_MODIFIED;
-      p = out->buffer;
-      freez(in);
-      freez(out);
-      return(p);
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_filter_function
- *
- * Description :  Decides which content filter function has
- *                to be applied (if any).
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  The content filter function to run, or
- *                NULL if no content filter is active
- *
- *********************************************************************/
-filter_function_ptr get_filter_function(struct client_state *csp)
-{
-   filter_function_ptr filter_function = NULL;
-
-   /*
-    * Are we enabling text mode by force?
-    */
-   if (csp->action->flags & ACTION_FORCE_TEXT_MODE)
-   {
-      /*
-       * Do we really have to?
-       */
-      if (csp->content_type & CT_TEXT)
-      {
-         log_error(LOG_LEVEL_HEADER, "Text mode is already enabled.");   
-      }
-      else
-      {
-         csp->content_type |= CT_TEXT;
-         log_error(LOG_LEVEL_HEADER, "Text mode enabled by force. Take cover!");   
-      }
-   }
-
-   if (!(csp->content_type & CT_DECLARED))
-   {
-      /*
-       * The server didn't bother to declare a MIME-Type.
-       * Assume it's text that can be filtered.
-       *
-       * This also regulary happens with 304 responses,
-       * therefore logging anything here would cause
-       * too much noise.
-       */
-      csp->content_type |= CT_TEXT;
-   }
-
-   /*
-    * Choose the applying filter function based on
-    * the content type and action settings.
-    */
-   if ((csp->content_type & CT_TEXT) &&
-       (csp->rlist != NULL) &&
-       (!list_is_empty(csp->action->multi[ACTION_MULTI_FILTER])))
-   {
-      filter_function = pcrs_filter_response;
-   }
-   else if ((csp->content_type & CT_GIF)  &&
-            (csp->action->flags & ACTION_DEANIMATE))
-   {
-      filter_function = gif_deanimate_response;
-   }
-
-   return filter_function;
-}
-
-
-/*********************************************************************
- *
- * Function    :  remove_chunked_transfer_coding
- *
- * Description :  In-situ remove the "chunked" transfer coding as defined
- *                in rfc2616 from a buffer.
- *
- * Parameters  :
- *          1  :  buffer = Pointer to the text buffer
- *          2  :  size =  In: Number of bytes to be processed,
- *                       Out: Number of bytes after de-chunking.
- *                       (undefined in case of errors)
- *
- * Returns     :  JB_ERR_OK for success,
- *                JB_ERR_PARSE otherwise
- *
- *********************************************************************/
-static jb_err remove_chunked_transfer_coding(char *buffer, size_t *size)
-{
-   size_t newsize = 0;
-   unsigned int chunksize = 0;
-   char *from_p, *to_p;
-
-   assert(buffer);
-   from_p = to_p = buffer;
-
-   if (sscanf(buffer, "%x", &chunksize) != 1)
-   {
-      log_error(LOG_LEVEL_ERROR, "Invalid first chunksize while stripping \"chunked\" transfer coding");
-      return JB_ERR_PARSE;
-   }
-
-   while (chunksize > 0U)
-   {
-      if (NULL == (from_p = strstr(from_p, "\r\n")))
-      {
-         log_error(LOG_LEVEL_ERROR, "Parse error while stripping \"chunked\" transfer coding");
-         return JB_ERR_PARSE;
-      }
-
-      if ((newsize += chunksize) >= *size)
-      {
-         log_error(LOG_LEVEL_ERROR,
-            "Chunk size %d exceeds buffer size %d in  \"chunked\" transfer coding",
-            chunksize, *size);
-         return JB_ERR_PARSE;
-      }
-      from_p += 2;
-
-      memmove(to_p, from_p, (size_t) chunksize);
-      to_p = buffer + newsize;
-      from_p += chunksize + 2;
-
-      if (sscanf(from_p, "%x", &chunksize) != 1)
-      {
-         log_error(LOG_LEVEL_INFO, "Invalid \"chunked\" transfer encoding detected and ignored.");
-         break;
-      }
-   }
-   
-   /* XXX: Should get its own loglevel. */
-   log_error(LOG_LEVEL_RE_FILTER, "De-chunking successful. Shrunk from %d to %d", *size, newsize);
-
-   *size = newsize;
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  prepare_for_filtering
- *
- * Description :  If necessary, de-chunks and decompresses
- *                the content so it can get filterd.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK for success,
- *                JB_ERR_PARSE otherwise
- *
- *********************************************************************/
-static jb_err prepare_for_filtering(struct client_state *csp)
-{
-   jb_err err = JB_ERR_OK;
-
-   /*
-    * If the body has a "chunked" transfer-encoding,
-    * get rid of it, adjusting size and iob->eod
-    */
-   if (csp->flags & CSP_FLAG_CHUNKED)
-   {
-      size_t size = (size_t)(csp->iob->eod - csp->iob->cur);
-
-      log_error(LOG_LEVEL_RE_FILTER, "Need to de-chunk first");
-      err = remove_chunked_transfer_coding(csp->iob->cur, &size);
-      if (JB_ERR_OK == err)
-      {
-         csp->iob->eod = csp->iob->cur + size;
-         csp->flags |= CSP_FLAG_MODIFIED;
-      }
-      else
-      {
-         return JB_ERR_PARSE;
-      }
-   }
-
-#ifdef FEATURE_ZLIB
-   /*
-    * If the body has a supported transfer-encoding,
-    * decompress it, adjusting size and iob->eod.
-    */
-   if (csp->content_type & (CT_GZIP|CT_DEFLATE))
-   {
-      if (0 == csp->iob->eod - csp->iob->cur)
-      {
-         /* Nothing left after de-chunking. */
-         return JB_ERR_OK;
-      }
-
-      err = decompress_iob(csp);
-
-      if (JB_ERR_OK == err)
-      {
-         csp->flags |= CSP_FLAG_MODIFIED;
-         csp->content_type &= ~CT_TABOO;
-      }
-      else
-      {
-         /*
-          * Unset CT_GZIP and CT_DEFLATE to remember not
-          * to modify the Content-Encoding header later.
-          */
-         csp->content_type &= ~CT_GZIP;
-         csp->content_type &= ~CT_DEFLATE;
-      }
-   }
-#endif
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  execute_content_filter
- *
- * Description :  Executes a given content filter.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  content_filter = The filter function to execute
- *
- * Returns     :  Pointer to the modified buffer, or
- *                NULL if filtering failed or wasn't necessary.
- *
- *********************************************************************/
-char *execute_content_filter(struct client_state *csp, filter_function_ptr content_filter)
-{
-   if (0 == csp->iob->eod - csp->iob->cur)
-   {
-      /*
-       * No content (probably status code 301, 302 ...),
-       * no filtering necessary.
-       */
-      return NULL;
-   }
-
-   if (JB_ERR_OK != prepare_for_filtering(csp))
-   {
-      /*
-       * failed to de-chunk or decompress.
-       */
-      return NULL;
-   }
-
-   if (0 == csp->iob->eod - csp->iob->cur)
-   {
-      /*
-       * Clown alarm: chunked and/or compressed nothing delivered.
-       */
-      return NULL;
-   }
-
-   return ((*content_filter)(csp));
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_url_actions
- *
- * Description :  Gets the actions for this URL.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  http = http_request request for blocked URLs
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void get_url_actions(struct client_state *csp, struct http_request *http)
-{
-   struct file_list *fl;
-   struct url_actions *b;
-   int i;
-
-   init_current_action(csp->action);
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (((fl = csp->actions_list[i]) == NULL) || ((b = fl->f) == NULL))
-      {
-         return;
-      }
-
-      apply_url_actions(csp->action, http, b);
-   }
-
-   return;
-}
-
-
-/*********************************************************************
- *
- * Function    :  apply_url_actions
- *
- * Description :  Applies a list of URL actions.
- *
- * Parameters  :
- *          1  :  action = Destination.
- *          2  :  http = Current URL
- *          3  :  b = list of URL actions to apply
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void apply_url_actions(struct current_action_spec *action,
-                       struct http_request *http,
-                       struct url_actions *b)
-{
-   if (b == NULL)
-   {
-      /* Should never happen */
-      return;
-   }
-
-   for (b = b->next; NULL != b; b = b->next)
-   {
-      if (url_match(b->url, http))
-      {
-         merge_current_action(action, b->action);
-      }
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_forward_override_settings
- *
- * Description :  Returns forward settings as specified with the
- *                forward-override{} action. forward-override accepts
- *                forward lines similar to the one used in the
- *                configuration file, but without the URL pattern.
- *
- *                For example:
- *
- *                   forward / .
- *
- *                in the configuration file can be replaced with
- *                the action section:
- *
- *                 {+forward-override{forward .}}
- *                 /
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  Pointer to forwarding structure in case of success.
- *                Invalid syntax is fatal.
- *
- *********************************************************************/
-const static struct forward_spec *get_forward_override_settings(struct client_state *csp)
-{
-   const char *forward_override_line = csp->action->string[ACTION_STRING_FORWARD_OVERRIDE];
-   char forward_settings[BUFFER_SIZE];
-   char *http_parent = NULL;
-   /* variable names were chosen for consistency reasons. */
-   struct forward_spec *fwd = NULL;
-   int vec_count;
-   char *vec[3];
-
-   assert(csp->action->flags & ACTION_FORWARD_OVERRIDE);
-   /* Should be enforced by load_one_actions_file() */
-   assert(strlen(forward_override_line) < sizeof(forward_settings) - 1);
-
-   /* Create a copy ssplit can modify */
-   strlcpy(forward_settings, forward_override_line, sizeof(forward_settings));
-
-   if (NULL != csp->fwd)
-   {
-      /*
-       * XXX: Currently necessary to prevent memory
-       * leaks when the show-url-info cgi page is visited.
-       */
-      unload_forward_spec(csp->fwd);
-   }
-
-   /*
-    * allocate a new forward node, valid only for
-    * the lifetime of this request. Save its location
-    * in csp as well, so sweep() can free it later on.
-    */
-   fwd = csp->fwd = zalloc(sizeof(*fwd));
-   if (NULL == fwd)
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "can't allocate memory for forward-override{%s}", forward_override_line);
-      /* Never get here - LOG_LEVEL_FATAL causes program exit */
-      return NULL;
-   }
-
-   vec_count = ssplit(forward_settings, " \t", vec, SZ(vec), 1, 1);
-   if ((vec_count == 2) && !strcasecmp(vec[0], "forward"))
-   {
-      fwd->type = SOCKS_NONE;
-
-      /* Parse the parent HTTP proxy host:port */
-      http_parent = vec[1];
-
-   }
-   else if (vec_count == 3)
-   {
-      char *socks_proxy = NULL;
-
-      if  (!strcasecmp(vec[0], "forward-socks4"))
-      {
-         fwd->type = SOCKS_4;
-         socks_proxy = vec[1];
-      }
-      else if (!strcasecmp(vec[0], "forward-socks4a"))
-      {
-         fwd->type = SOCKS_4A;
-         socks_proxy = vec[1];
-      }
-      else if (!strcasecmp(vec[0], "forward-socks5"))
-      {
-         fwd->type = SOCKS_5;
-         socks_proxy = vec[1];
-      }
-
-      if (NULL != socks_proxy)
-      {
-         /* Parse the SOCKS proxy host[:port] */
-         fwd->gateway_host = strdup(socks_proxy);
-
-         if (NULL != (socks_proxy = strchr(fwd->gateway_host, ':')))
-         {
-            *socks_proxy++ = '\0';
-            fwd->gateway_port = (int)strtol(socks_proxy, NULL, 0);
-         }
-
-         if (fwd->gateway_port <= 0)
-         {
-            fwd->gateway_port = 1080;
-         }
-
-         http_parent = vec[2];
-      }
-   }
-
-   if (NULL == http_parent)
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "Invalid forward-override syntax in: %s", forward_override_line);
-      /* Never get here - LOG_LEVEL_FATAL causes program exit */
-   }
-
-   /* Parse http forwarding settings */
-   if (strcmp(http_parent, ".") != 0)
-   {
-      fwd->forward_host = strdup(http_parent);
-
-      if (NULL != (http_parent = strchr(fwd->forward_host, ':')))
-      {
-         *http_parent++ = '\0';
-         fwd->forward_port = (int)strtol(http_parent, NULL, 0);
-      }
-
-      if (fwd->forward_port <= 0)
-      {
-         fwd->forward_port = 8000;
-      }
-   }
-
-   assert (NULL != fwd);
-
-   log_error(LOG_LEVEL_CONNECT,
-      "Overriding forwarding settings based on \'%s\'", forward_override_line);
-
-   return fwd;
-}
-
-
-/*********************************************************************
- *
- * Function    :  forward_url
- *
- * Description :  Should we forward this to another proxy?
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  http = http_request request for current URL
- *
- * Returns     :  Pointer to forwarding information.
- *
- *********************************************************************/
-const struct forward_spec *forward_url(struct client_state *csp,
-                                       const struct http_request *http)
-{
-   static const struct forward_spec fwd_default[1] = { FORWARD_SPEC_INITIALIZER };
-   struct forward_spec *fwd = csp->config->forward;
-
-   if (csp->action->flags & ACTION_FORWARD_OVERRIDE)
-   {
-      return get_forward_override_settings(csp);
-   }
-
-   if (fwd == NULL)
-   {
-      return fwd_default;
-   }
-
-   while (fwd != NULL)
-   {
-      if (url_match(fwd->url, http))
-      {
-         return fwd;
-      }
-      fwd = fwd->next;
-   }
-
-   return fwd_default;
-}
-
-
-/*********************************************************************
- *
- * Function    :  direct_response 
- *
- * Description :  Check if Max-Forwards == 0 for an OPTIONS or TRACE
- *                request and if so, return a HTTP 501 to the client.
- *
- *                FIXME: I have a stupid name and I should handle the
- *                requests properly. Still, what we do here is rfc-
- *                compliant, whereas ignoring or forwarding are not.
- *
- * Parameters  :  
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  http_response if , NULL if nonmatch or handler fail
- *
- *********************************************************************/
-struct http_response *direct_response(struct client_state *csp)
-{
-   struct http_response *rsp;
-   struct list_entry *p;
-
-   if ((0 == strcmpic(csp->http->gpc, "trace"))
-      || (0 == strcmpic(csp->http->gpc, "options")))
-   {
-      for (p = csp->headers->first; (p != NULL) ; p = p->next)
-      {
-         if (!strncmpic("Max-Forwards:", p->str, 13))
-         {
-            unsigned int max_forwards;
-
-            /*
-             * If it's a Max-Forwards value of zero,
-             * we have to intercept the request.
-             */
-            if (1 == sscanf(p->str+12, ": %u", &max_forwards) && max_forwards == 0)
-            {
-               /*
-                * FIXME: We could handle at least TRACE here,
-                * but that would require a verbatim copy of
-                * the request which we don't have anymore
-                */
-                log_error(LOG_LEVEL_HEADER,
-                  "Detected header \'%s\' in OPTIONS or TRACE request. Returning 501.",
-                  p->str);
-
-               /* Get mem for response or fail*/
-               if (NULL == (rsp = alloc_http_response()))
-               {
-                  return cgi_error_memory();
-               }
-            
-               if (NULL == (rsp->status = strdup("501 Not Implemented")))
-               {
-                  free_http_response(rsp);
-                  return cgi_error_memory();
-               }
-
-               rsp->is_static = 1;
-               rsp->reason = RSP_REASON_UNSUPPORTED;
-
-               return(finish_http_response(csp, rsp));
-            }
-         }
-      }
-   }
-   return NULL;
-}
-
-
-/*********************************************************************
- *
- * Function    :  content_filters_enabled
- *
- * Description :  Checks whether there are any content filters
- *                enabled for the current request.
- *
- * Parameters  :  
- *          1  :  action = Action spec to check.
- *
- * Returns     :  TRUE for yes, FALSE otherwise
- *
- *********************************************************************/
-int content_filters_enabled(const struct current_action_spec *action)
-{
-   return ((action->flags & ACTION_DEANIMATE) ||
-      !list_is_empty(action->multi[ACTION_MULTI_FILTER]));
-}
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/filters.h b/external/privoxy/filters.h
deleted file mode 100644
index 66794e1..0000000
--- a/external/privoxy/filters.h
+++ /dev/null
@@ -1,382 +0,0 @@
-#ifndef FILTERS_H_INCLUDED
-#define FILTERS_H_INCLUDED
-#define FILTERS_H_VERSION "$Id: filters.h,v 1.36 2008/05/21 15:35:08 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/filters.h,v $
- *
- * Purpose     :  Declares functions to parse/crunch headers and pages.
- *                Functions declared include:
- *                   `acl_addr', `add_stats', `block_acl', `block_imageurl',
- *                   `block_url', `url_actions', `filter_popups', `forward_url'
- *                   `ij_untrusted_url', `intercept_url', `re_process_buffer',
- *                   `show_proxy_args', and `trust_url'
- *
- * Copyright   :  Written by and Copyright (C) 2001, 2004 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: filters.h,v $
- *    Revision 1.36  2008/05/21 15:35:08  fabiankeil
- *    - Mark csp as immutable for block_acl().
- *    - Remove an obsolete complaint about filter_popups().
- *
- *    Revision 1.35  2008/05/03 16:40:45  fabiankeil
- *    Change content_filters_enabled()'s parameter from
- *    csp->action to action so it can be also used in the
- *    CGI code. Don't bother checking if there are filters
- *    loaded, as that's somewhat besides the point.
- *
- *    Revision 1.34  2008/03/02 12:25:25  fabiankeil
- *    Also use shiny new connect_port_is_forbidden() in jcc.c.
- *
- *    Revision 1.33  2008/02/23 16:57:12  fabiankeil
- *    Rename url_actions() to get_url_actions() and let it
- *    use the standard parameter ordering.
- *
- *    Revision 1.32  2008/02/23 16:33:43  fabiankeil
- *    Let forward_url() use the standard parameter ordering
- *    and mark its second parameter immutable.
- *
- *    Revision 1.31  2007/10/19 16:53:28  fabiankeil
- *    Add helper function to check if any content filters are enabled.
- *
- *    Revision 1.30  2007/09/29 10:21:16  fabiankeil
- *    - Move get_filter_function() from jcc.c to filters.c
- *      so the filter functions can be static.
- *    - Don't bother filtering body-less responses.
- *
- *    Revision 1.29  2007/09/28 16:38:55  fabiankeil
- *    - Execute content filters through execute_content_filter().
- *    - Add prepare_for_filtering() so filter functions don't have to
- *      care about de-chunking and decompression. As a side effect this enables
- *      decompression for gif_deanimate_response() and jpeg_inspect_response().
- *    - Change remove_chunked_transfer_coding()'s return type to jb_err.
- *      Some clowns feel like chunking empty responses in which case
- *      (size == 0) is valid but previously would be interpreted as error.
- *
- *    Revision 1.28  2007/09/02 15:31:20  fabiankeil
- *    Move match_portlist() from filter.c to urlmatch.c.
- *    It's used for url matching, not for filtering.
- *
- *    Revision 1.27  2007/04/30 15:02:18  fabiankeil
- *    Introduce dynamic pcrs jobs that can resolve variables.
- *
- *    Revision 1.26  2007/03/13 11:28:43  fabiankeil
- *    - Fix port handling in acl_addr() and use a temporary acl spec
- *      copy so error messages don't contain a truncated version.
- *    - Log size of iob before and after decompression.
- *
- *    Revision 1.25  2007/01/12 15:36:44  fabiankeil
- *    Mark *csp as immutable for is_untrusted_url()
- *    and is_imageurl(). Closes FR 1237736.
- *
- *    Revision 1.24  2006/12/29 18:30:46  fabiankeil
- *    Fixed gcc43 conversion warnings,
- *    changed sprintf calls to snprintf.
- *
- *    Revision 1.23  2006/11/28 15:19:43  fabiankeil
- *    Implemented +redirect{s@foo@bar@} to generate
- *    a redirect based on a rewritten version of the
- *    original URL.
- *
- *    Revision 1.22  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.20.2.2  2004/10/03 12:53:32  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.20.2.1  2002/09/25 14:51:51  oes
- *    Added basic support for OPTIONS and TRACE HTTP methods:
- *    New function direct_response which handles OPTIONS and
- *    TRACE requests whose Max-Forwards header field is zero.
- *
- *    Revision 1.20  2002/04/02 14:56:16  oes
- *    Bugfix: is_untrusted_url() and trust_url() now depend on FEATURE_TRUST, not FEATURE_COOKIE_JAR
- *
- *    Revision 1.19  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.18  2002/03/25 22:12:45  oes
- *    Added fix for undefined INADDR_NONE on Solaris by Bart Schelstraete
- *
- *    Revision 1.17  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.16  2002/01/17 21:01:02  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Revision 1.15  2001/10/10 16:44:16  oes
- *    Added match_portlist function
- *
- *    Revision 1.14  2001/10/07 15:41:40  oes
- *    Added prototype for remove_chunked_transfer_coding
- *
- *    Revision 1.13  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.12  2001/07/29 19:01:11  jongfoster
- *    Changed _FILENAME_H to FILENAME_H_INCLUDED.
- *    Added forward declarations for needed structures.
- *
- *    Revision 1.11  2001/07/13 14:00:18  oes
- *     - Introduced gif_deanimate_response
- *     - Renamed re_process_buffer to pcrs_filter_response
- *     - Removed all #ifdef PCRS
- *
- *    Revision 1.10  2001/06/29 13:29:01  oes
- *    Cleaned up and updated to reflect the changesin
- *    filters.c
- *
- *    Revision 1.9  2001/06/07 23:10:53  jongfoster
- *    Replacing struct gateway with struct forward_spec
- *
- *    Revision 1.8  2001/06/03 19:12:00  oes
- *    extracted-CGI relevant stuff
- *
- *    Revision 1.7  2001/05/31 21:21:30  jongfoster
- *    Permissionsfile / actions file changes:
- *    - Changed "permission" to "action" throughout
- *    - changes to file format to allow string parameters
- *    - Moved helper functions to actions.c
- *
- *    Revision 1.6  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.5  2001/05/27 22:17:04  oes
- *
- *    - re_process_buffer no longer writes the modified buffer
- *      to the client, which was very ugly. It now returns the
- *      buffer, which it is then written by chat.
- *
- *    - content_length now adjusts the Content-Length: header
- *      for modified documents rather than crunch()ing it.
- *      (Length info in csp->content_length, which is 0 for
- *      unmodified documents)
- *
- *    - For this to work, sed() is called twice when filtering.
- *
- *    Revision 1.4  2001/05/26 15:26:15  jongfoster
- *    ACL feature now provides more security by immediately dropping
- *    connections from untrusted hosts.
- *
- *    Revision 1.3  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:52  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-struct access_control_addr;
-struct client_state;
-struct http_request;
-struct http_response;
-struct current_action_spec;
-struct url_actions;
-struct url_spec;
-
-
-/*
- * ACL checking
- */
-#ifdef FEATURE_ACL
-extern int block_acl(const struct access_control_addr *dst, const struct client_state *csp);
-extern int acl_addr(const char *aspec, struct access_control_addr *aca);
-#endif /* def FEATURE_ACL */
-
-/*
- * Interceptors
- */
-extern struct http_response *block_url(struct client_state *csp);
-extern struct http_response *redirect_url(struct client_state *csp);
-#ifdef FEATURE_TRUST
-extern struct http_response *trust_url(struct client_state *csp);
-#endif /* def FEATURE_TRUST */
-
-/*
- * Request inspectors
- */
-#ifdef FEATURE_TRUST
-extern int is_untrusted_url(const struct client_state *csp);
-#endif /* def FEATURE_TRUST */
-#ifdef FEATURE_IMAGE_BLOCKING
-extern int is_imageurl(const struct client_state *csp);
-#endif /* def FEATURE_IMAGE_BLOCKING */
-extern int connect_port_is_forbidden(const struct client_state *csp);
-
-/*
- * Determining applicable actions
- */
-extern void get_url_actions(struct client_state *csp,
-                            struct http_request *http);
-extern void apply_url_actions(struct current_action_spec *action, 
-                              struct http_request *http, 
-                              struct url_actions *b);
-/*
- * Determining parent proxies
- */
-extern const struct forward_spec *forward_url(struct client_state *csp,
-                                              const struct http_request *http);
-
-/*
- * Content modification
- */
-
-typedef char *(*filter_function_ptr)();
-extern char *execute_content_filter(struct client_state *csp, filter_function_ptr content_filter);
-
-extern filter_function_ptr get_filter_function(struct client_state *csp);
-extern char *execute_single_pcrs_command(char *subject, const char *pcrs_command, int *hits);
-extern char *rewrite_url(char *old_url, const char *pcrs_command);
-extern char *get_last_url(char *subject, const char *redirect_mode);
-
-extern pcrs_job *compile_dynamic_pcrs_job_list(const struct client_state *csp, const struct re_filterfile_spec *b);
-
-extern int content_filters_enabled(const struct current_action_spec *action);
-
-/*
- * Handling Max-Forwards:
- */
-extern struct http_response *direct_response(struct client_state *csp);
-
-
-/*
- * Solaris fix:
- */
-#ifndef INADDR_NONE
-#define INADDR_NONE -1
-#endif     
-
-/* 
- * Revision control strings from this header and associated .c file
- */
-extern const char filters_rcs[];
-extern const char filters_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef FILTERS_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/gateway.c b/external/privoxy/gateway.c
deleted file mode 100644
index 1e4ffd0..0000000
--- a/external/privoxy/gateway.c
+++ /dev/null
@@ -1,1379 +0,0 @@
-const char gateway_rcs[] = "$Id: gateway.c,v 1.48 2009/02/13 17:20:36 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/gateway.c,v $
- *
- * Purpose     :  Contains functions to connect to a server, possibly
- *                using a "forwarder" (i.e. HTTP proxy and/or a SOCKS4
- *                or SOCKS5 proxy).
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: gateway.c,v $
- *    Revision 1.48  2009/02/13 17:20:36  fabiankeil
- *    Reword keep-alive support warning and only show
- *    it #if !defined(HAVE_POLL) && !defined(_WIN32).
- *
- *    Revision 1.47  2008/12/24 17:06:19  fabiankeil
- *    Keep a thread around to timeout alive connections
- *    even if no new requests are coming in.
- *
- *    Revision 1.46  2008/12/13 11:07:23  fabiankeil
- *    Remove duplicated debugging checks
- *    in connection_destination_matches().
- *
- *    Revision 1.45  2008/12/04 18:17:07  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.44  2008/11/22 11:54:04  fabiankeil
- *    Move log message around to include the socket number.
- *
- *    Revision 1.43  2008/11/13 09:15:51  fabiankeil
- *    Make keep_alive_timeout static.
- *
- *    Revision 1.42  2008/11/13 09:08:42  fabiankeil
- *    Add new config option: keep-alive-timeout.
- *
- *    Revision 1.41  2008/11/08 15:29:58  fabiankeil
- *    Unify two debug messages.
- *
- *    Revision 1.40  2008/11/08 15:14:05  fabiankeil
- *    Fix duplicated debugging check.
- *
- *    Revision 1.39  2008/10/25 11:33:01  fabiankeil
- *    Remove already out-commented line left over from debugging.
- *
- *    Revision 1.38  2008/10/24 17:33:00  fabiankeil
- *    - Tone the "keep-alive support is experimental" warning
- *      down a bit as hackish 0-chunk detection has been
- *      implemented recently.
- *    - Only show the "ndef HAVE_POLL" warning once on start-up.
- *
- *    Revision 1.37  2008/10/23 17:40:53  fabiankeil
- *    Fix forget_connection() and mark_connection_unused(),
- *    which would both under certain circumstances access
- *    reusable_connection[MAX_REUSABLE_CONNECTIONS]. Oops.
- *
- *    Revision 1.36  2008/10/18 19:49:15  fabiankeil
- *    - Factor close_unusable_connections() out of
- *      get_reusable_connection() to make sure we really check
- *      all the remembered connections, not just the ones before
- *      the next reusable one.
- *    - Plug two file descriptor leaks. Internally marking
- *      connections as closed doesn't cut it.
- *
- *    Revision 1.35  2008/10/17 17:12:01  fabiankeil
- *    In socket_is_still_usable(), use select()
- *    and FD_ISSET() if poll() isn't available.
- *
- *    Revision 1.34  2008/10/17 17:07:13  fabiankeil
- *    Add preliminary timeout support.
- *
- *    Revision 1.33  2008/10/16 16:34:21  fabiankeil
- *    Fix two gcc44 warnings.
- *
- *    Revision 1.32  2008/10/16 16:27:22  fabiankeil
- *    Fix compiler warning.
- *
- *    Revision 1.31  2008/10/16 07:31:11  fabiankeil
- *    - Factor socket_is_still_usable() out of get_reusable_connection().
- *    - If poll() isn't available, show a warning and assume the socket
- *      is still usable.
- *
- *    Revision 1.30  2008/10/13 17:31:03  fabiankeil
- *    If a remembered connection is no longer usable and
- *    has been marked closed, don't bother checking if the
- *    destination matches.
- *
- *    Revision 1.29  2008/10/11 16:59:41  fabiankeil
- *    Add missing dots for two log messages.
- *
- *    Revision 1.28  2008/10/09 18:21:41  fabiankeil
- *    Flush work-in-progress changes to keep outgoing connections
- *    alive where possible. Incomplete and mostly #ifdef'd out.
- *
- *    Revision 1.27  2008/09/27 15:05:51  fabiankeil
- *    Return only once in forwarded_connect().
- *
- *    Revision 1.26  2008/08/18 17:42:06  fabiankeil
- *    Fix typo in macro name.
- *
- *    Revision 1.25  2008/02/07 18:09:46  fabiankeil
- *    In socks5_connect:
- *    - make the buffers quite a bit smaller.
- *    - properly report "socks5 server unreachable" failures.
- *    - let strncpy() use the whole buffer. Using a length of 0xffu wasn't actually
- *      wrong, but requires too much thinking as it doesn't depend on the buffer size.
- *    - log a message if the socks5 server sends more data than expected.
- *    - add some assertions and comments.
- *
- *    Revision 1.24  2008/02/04 14:56:29  fabiankeil
- *    - Fix a compiler warning.
- *    - Stop assuming that htonl(INADDR_NONE) equals INADDR_NONE.
- *
- *    Revision 1.23  2008/02/04 13:11:35  fabiankeil
- *    Remember the cause of the SOCKS5 error for the CGI message.
- *
- *    Revision 1.22  2008/02/03 13:46:15  fabiankeil
- *    Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes.
- *
- *    Revision 1.21  2007/07/28 12:30:03  fabiankeil
- *    Modified patch from Song Weijia (#1762559) to
- *    fix socks requests on big-endian platforms.
- *
- *    Revision 1.20  2007/05/14 10:23:48  fabiankeil
- *    - Use strlcpy() instead of strcpy().
- *    - Use the same buffer for socks requests and socks responses.
- *    - Fix bogus warning about web_server_addr being used uninitialized.
- *
- *    Revision 1.19  2007/01/25 14:09:45  fabiankeil
- *    - Save errors in socks4_connect() to csp->error_message.
- *    - Silence some gcc43 warnings, hopefully the right way.
- *
- *    Revision 1.18  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.16  2002/05/12 21:36:29  jongfoster
- *    Correcting function comments
- *
- *    Revision 1.15  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.14  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.13  2002/03/13 00:29:59  jongfoster
- *    Killing warnings
- *
- *    Revision 1.12  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.11  2002/03/08 17:46:04  jongfoster
- *    Fixing int/size_t warnings
- *
- *    Revision 1.10  2002/03/07 03:50:19  oes
- *     - Improved handling of failed DNS lookups
- *     - Fixed compiler warnings
- *
- *    Revision 1.9  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.8  2001/09/13 20:10:12  jongfoster
- *    Fixing missing #include under Windows
- *
- *    Revision 1.7  2001/09/12 17:58:26  steudten
- *
- *    add #include <string.h>
- *
- *    Revision 1.6  2001/09/10 10:41:16  oes
- *    Added #include in.h
- *
- *    Revision 1.5  2001/07/29 18:47:57  jongfoster
- *    Adding missing #include project.h
- *
- *    Revision 1.4  2001/07/24 12:47:06  oes
- *    Applied BeOS support update by Eugenia
- *
- *    Revision 1.3  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.2  2001/06/07 23:11:38  jongfoster
- *    Removing gateways[] list - no longer used.
- *    Replacing function pointer in struct gateway with a directly
- *    called function forwarded_connect(), which can do the common
- *    task of deciding whether to connect to the web server or HTTP
- *    proxy.
- *    Replacing struct gateway with struct forward_spec
- *    Fixing bug with SOCKS4A and HTTP proxy server in combination.
- *    It was a bug which led to the connection being made to the web
- *    server rather than the HTTP proxy, and also a buffer overrun.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:54  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-
-#ifndef _WIN32
-#include <netinet/in.h>
-#endif
-
-#include <errno.h>
-#include <string.h>
-#include "assert.h"
-
-#ifdef _WIN32
-#include <winsock2.h>
-#endif /* def _WIN32 */
-
-#ifdef __BEOS__
-#include <netdb.h>
-#endif /* def __BEOS__ */
-
-#ifdef __OS2__
-#include <utils.h>
-#endif /* def __OS2__ */
-
-#include "project.h"
-#include "jcc.h"
-#include "errlog.h"
-#include "jbsockets.h"
-#include "gateway.h"
-#include "miscutil.h"
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-#ifdef HAVE_POLL
-#ifdef __GLIBC__ 
-#include <sys/poll.h>
-#else
-#include <poll.h>
-#endif /* def __GLIBC__ */
-#endif /* HAVE_POLL */
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-const char gateway_h_rcs[] = GATEWAY_H_VERSION;
-
-static jb_socket socks4_connect(const struct forward_spec * fwd,
-                                const char * target_host,
-                                int target_port,
-                                struct client_state *csp);
-
-static jb_socket socks5_connect(const struct forward_spec *fwd,
-                                const char *target_host,
-                                int target_port,
-                                struct client_state *csp);
-
-
-#define SOCKS_REQUEST_GRANTED          90
-#define SOCKS_REQUEST_REJECT           91
-#define SOCKS_REQUEST_IDENT_FAILED     92
-#define SOCKS_REQUEST_IDENT_CONFLICT   93
-
-#define SOCKS5_REQUEST_GRANTED             0
-#define SOCKS5_REQUEST_FAILED              1
-#define SOCKS5_REQUEST_DENIED              2
-#define SOCKS5_REQUEST_NETWORK_UNREACHABLE 3
-#define SOCKS5_REQUEST_HOST_UNREACHABLE    4
-#define SOCKS5_REQUEST_CONNECTION_REFUSED  5
-#define SOCKS5_REQUEST_TTL_EXPIRED         6
-#define SOCKS5_REQUEST_PROTOCOL_ERROR      7
-#define SOCKS5_REQUEST_BAD_ADDRESS_TYPE    8
-
-/* structure of a socks client operation */
-struct socks_op {
-   unsigned char vn;          /* socks version number */
-   unsigned char cd;          /* command code */
-   unsigned char dstport[2];  /* destination port */
-   unsigned char dstip[4];    /* destination address */
-   char userid;               /* first byte of userid */
-   char padding[3];           /* make sure sizeof(struct socks_op) is endian-independent. */
-   /* more bytes of the userid follow, terminated by a NULL */
-};
-
-/* structure of a socks server reply */
-struct socks_reply {
-   unsigned char vn;          /* socks version number */
-   unsigned char cd;          /* command code */
-   unsigned char dstport[2];  /* destination port */
-   unsigned char dstip[4];    /* destination address */
-};
-
-static const char socks_userid[] = "anonymous";
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-
-#define MAX_REUSABLE_CONNECTIONS 100
-static int keep_alive_timeout = DEFAULT_KEEP_ALIVE_TIMEOUT;
-
-struct reusable_connection
-{
-   jb_socket sfd;
-   int       in_use;
-   char      *host;
-   int       port;
-   time_t    timestamp;
-
-   int       forwarder_type;
-   char      *gateway_host;
-   int       gateway_port;
-   char      *forward_host;
-   int       forward_port;
-};
-
-static struct reusable_connection reusable_connection[MAX_REUSABLE_CONNECTIONS];
-
-static int mark_connection_unused(jb_socket sfd);
-static void mark_connection_closed(struct reusable_connection *closed_connection);
-static int socket_is_still_usable(jb_socket sfd);
-
-
-/*********************************************************************
- *
- * Function    :  initialize_reusable_connections
- *
- * Description :  Initializes the reusable_connection structures.
- *                Must be called with connection_reuse_mutex locked.
- *
- * Parameters  : N/A
- *
- * Returns     : void
- *
- *********************************************************************/
-extern void initialize_reusable_connections(void)
-{
-   unsigned int slot = 0;
-
-#if !defined(HAVE_POLL) && !defined(_WIN32)
-   log_error(LOG_LEVEL_INFO,
-      "Detecting already dead connections might not work "
-      "correctly on your platform. In case of problems, "
-      "unset the keep-alive-timeout option.");
-#endif
-
-   for (slot = 0; slot < SZ(reusable_connection); slot++)
-   {
-      mark_connection_closed(&reusable_connection[slot]);
-   }
-
-   log_error(LOG_LEVEL_CONNECT, "Initialized %d socket slots.", slot);
-}
-
-
-/*********************************************************************
- *
- * Function    :  remember_connection
- *
- * Description :  Remembers a connection for reuse later on.
- *
- * Parameters  :
- *          1  :  sfd  = Open socket to remember.
- *          2  :  http = The destination for the connection.
- *          3  :  fwd  = The forwarder settings used.
- *
- * Returns     : void
- *
- *********************************************************************/
-void remember_connection(jb_socket sfd, const struct http_request *http,
-                                        const struct forward_spec *fwd)
-{
-   unsigned int slot = 0;
-   int free_slot_found = FALSE;
-
-   assert(sfd != JB_INVALID_SOCKET);
-
-   if (mark_connection_unused(sfd))
-   {
-      return;
-   }
-
-   privoxy_mutex_lock(&connection_reuse_mutex);
-
-   /* Find free socket slot. */
-   for (slot = 0; slot < SZ(reusable_connection); slot++)
-   {
-      if (reusable_connection[slot].sfd == JB_INVALID_SOCKET)
-      {
-         assert(reusable_connection[slot].in_use == 0);
-         log_error(LOG_LEVEL_CONNECT,
-            "Remembering socket %d for %s:%d in slot %d.",
-            sfd, http->host, http->port, slot);
-         free_slot_found = TRUE;
-         break;
-      }
-   }
-
-   if (!free_slot_found)
-   {
-      log_error(LOG_LEVEL_CONNECT,
-        "No free slots found to remembering socket for %s:%d. Last slot %d.",
-        http->host, http->port, slot);
-      privoxy_mutex_unlock(&connection_reuse_mutex);
-      close_socket(sfd);
-      return;
-   }
-
-   assert(NULL != http->host);
-   reusable_connection[slot].host = strdup(http->host);
-   if (NULL == reusable_connection[slot].host)
-   {
-      log_error(LOG_LEVEL_FATAL, "Out of memory saving socket.");
-   }
-   reusable_connection[slot].sfd = sfd;
-   reusable_connection[slot].port = http->port;
-   reusable_connection[slot].in_use = 0;
-   reusable_connection[slot].timestamp = time(NULL);
-
-   assert(NULL != fwd);
-   assert(reusable_connection[slot].gateway_host == NULL);
-   assert(reusable_connection[slot].gateway_port == 0);
-   assert(reusable_connection[slot].forwarder_type == SOCKS_NONE);
-   assert(reusable_connection[slot].forward_host == NULL);
-   assert(reusable_connection[slot].forward_port == 0);
-
-   reusable_connection[slot].forwarder_type = fwd->type;
-   if (NULL != fwd->gateway_host)
-   {
-      reusable_connection[slot].gateway_host = strdup(fwd->gateway_host);
-      if (NULL == reusable_connection[slot].gateway_host)
-      {
-         log_error(LOG_LEVEL_FATAL, "Out of memory saving gateway_host.");
-      }
-   }
-   else
-   {
-      reusable_connection[slot].gateway_host = NULL;
-   }
-   reusable_connection[slot].gateway_port = fwd->gateway_port;
-
-   if (NULL != fwd->forward_host)
-   {
-      reusable_connection[slot].forward_host = strdup(fwd->forward_host);
-      if (NULL == reusable_connection[slot].forward_host)
-      {
-         log_error(LOG_LEVEL_FATAL, "Out of memory saving forward_host.");
-      }
-   }
-   else
-   {
-      reusable_connection[slot].forward_host = NULL;
-   }
-   reusable_connection[slot].forward_port = fwd->forward_port;
-
-   privoxy_mutex_unlock(&connection_reuse_mutex);
-}
-
-
-/*********************************************************************
- *
- * Function    :  mark_connection_closed
- *
- * Description : Marks a reused connection closed.
- *               Must be called with connection_reuse_mutex locked.
- *
- * Parameters  :
- *          1  :  closed_connection = The connection to mark as closed.
- *
- * Returns     : void
- *
- *********************************************************************/
-static void mark_connection_closed(struct reusable_connection *closed_connection)
-{
-   closed_connection->in_use = FALSE;
-   closed_connection->sfd = JB_INVALID_SOCKET;
-   freez(closed_connection->host);
-   closed_connection->port = 0;
-   closed_connection->timestamp = 0;
-   closed_connection->forwarder_type = SOCKS_NONE;
-   freez(closed_connection->gateway_host);
-   closed_connection->gateway_port = 0;
-   freez(closed_connection->forward_host);
-   closed_connection->forward_port = 0;
-}
-
-
-/*********************************************************************
- *
- * Function    :  forget_connection
- *
- * Description :  Removes a previously remembered connection from
- *                the list of reusable connections.
- *
- * Parameters  :
- *          1  :  sfd = The socket belonging to the connection in question.
- *
- * Returns     : void
- *
- *********************************************************************/
-void forget_connection(jb_socket sfd)
-{
-   unsigned int slot = 0;
-
-   assert(sfd != JB_INVALID_SOCKET);
-
-   privoxy_mutex_lock(&connection_reuse_mutex);
-
-   for (slot = 0; slot < SZ(reusable_connection); slot++)
-   {
-      if (reusable_connection[slot].sfd == sfd)
-      {
-         assert(reusable_connection[slot].in_use);
-
-         log_error(LOG_LEVEL_CONNECT,
-            "Forgetting socket %d for %s:%d in slot %d.",
-            sfd, reusable_connection[slot].host,
-            reusable_connection[slot].port, slot);
-         mark_connection_closed(&reusable_connection[slot]);
-         privoxy_mutex_unlock(&connection_reuse_mutex);
-
-         return;
-      }
-   }
-
-   log_error(LOG_LEVEL_CONNECT,
-      "Socket %d already forgotten or never remembered.", sfd);
-
-   privoxy_mutex_unlock(&connection_reuse_mutex);
-}
-
-
-/*********************************************************************
- *
- * Function    :  connection_destination_matches
- *
- * Description :  Determines whether a remembered connection can
- *                be reused. That is, whether the destination and
- *                the forwarding settings match.
- *
- * Parameters  :
- *          1  :  connection = The connection to check.
- *          2  :  http = The destination for the connection.
- *          3  :  fwd  = The forwarder settings.
- *
- * Returns     :  TRUE for yes, FALSE otherwise.
- *
- *********************************************************************/
-static int connection_destination_matches(const struct reusable_connection *connection,
-                                          const struct http_request *http,
-                                          const struct forward_spec *fwd)
-{
-   if ((connection->forwarder_type != fwd->type)
-    || (connection->gateway_port   != fwd->gateway_port)
-    || (connection->forward_port   != fwd->forward_port)
-    || (connection->port           != http->port))
-   {
-      return FALSE;
-   }
-
-   if ((    (NULL != connection->gateway_host)
-         && (NULL != fwd->gateway_host)
-         && strcmpic(connection->gateway_host, fwd->gateway_host))
-       && (connection->gateway_host != fwd->gateway_host))
-   {
-      log_error(LOG_LEVEL_CONNECT, "Gateway mismatch.");
-      return FALSE;
-   }
-
-   if ((    (NULL != connection->forward_host)
-         && (NULL != fwd->forward_host)
-         && strcmpic(connection->forward_host, fwd->forward_host))
-      && (connection->forward_host != fwd->forward_host))
-   {
-      log_error(LOG_LEVEL_CONNECT, "Forwarding proxy mismatch.");
-      return FALSE;
-   }
-
-   return (!strcmpic(connection->host, http->host));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  close_unusable_connections
- *
- * Description :  Closes remembered connections that have timed
- *                out or have been closed on the other side.
- *
- * Parameters  :  none
- *
- * Returns     :  Number of connections that are still alive.
- *
- *********************************************************************/
-int close_unusable_connections(void)
-{
-   unsigned int slot = 0;
-   int connections_alive = 0;
-
-   privoxy_mutex_lock(&connection_reuse_mutex);
-
-   for (slot = 0; slot < SZ(reusable_connection); slot++)
-   {
-      if (!reusable_connection[slot].in_use
-         && (JB_INVALID_SOCKET != reusable_connection[slot].sfd))
-      {
-         time_t time_open = time(NULL) - reusable_connection[slot].timestamp;
-
-         if (keep_alive_timeout < time_open)
-         {
-            log_error(LOG_LEVEL_CONNECT,
-               "The connection to %s:%d in slot %d timed out. "
-               "Closing socket %d. Timeout is: %d.",
-               reusable_connection[slot].host,
-               reusable_connection[slot].port, slot,
-               reusable_connection[slot].sfd, keep_alive_timeout);
-            close_socket(reusable_connection[slot].sfd);
-            mark_connection_closed(&reusable_connection[slot]);
-         }
-         else if (!socket_is_still_usable(reusable_connection[slot].sfd))
-         {
-            log_error(LOG_LEVEL_CONNECT,
-               "The connection to %s:%d in slot %d is no longer usable. "
-               "Closing socket %d.", reusable_connection[slot].host,
-               reusable_connection[slot].port, slot,
-               reusable_connection[slot].sfd);
-            close_socket(reusable_connection[slot].sfd);
-            mark_connection_closed(&reusable_connection[slot]);
-         }
-         else
-         {
-            connections_alive++;
-         }
-      }
-   }
-
-   privoxy_mutex_unlock(&connection_reuse_mutex);
-
-   return connections_alive;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  socket_is_still_usable
- *
- * Description :  Decides whether or not an open socket is still usable.
- *
- * Parameters  :
- *          1  :  sfd = The socket to check.
- *
- * Returns     :  TRUE for yes, otherwise FALSE.
- *
- *********************************************************************/
-static int socket_is_still_usable(jb_socket sfd)
-{
-#ifdef HAVE_POLL
-   int poll_result;
-   struct pollfd poll_fd[1];
-
-   memset(poll_fd, 0, sizeof(poll_fd));
-   poll_fd[0].fd = sfd;
-   poll_fd[0].events = POLLIN;
-
-   poll_result = poll(poll_fd, 1, 0);
-
-   if (-1 != poll_result)
-   {
-      return !(poll_fd[0].revents & POLLIN);
-   }
-   else
-   {
-      log_error(LOG_LEVEL_CONNECT, "Polling socket %d failed.", sfd);
-      return FALSE;
-   }
-#else
-   fd_set readable_fds;
-   struct timeval timeout;
-   int ret;
-   int socket_is_alive = 0;
-
-   memset(&timeout, '\0', sizeof(timeout));
-   FD_ZERO(&readable_fds);
-   FD_SET(sfd, &readable_fds);
-
-   ret = select((int)sfd+1, &readable_fds, NULL, NULL, &timeout);
-   if (ret < 0)
-   {
-      log_error(LOG_LEVEL_ERROR, "select() failed!: %E");
-   }
-
-   /*
-    * XXX: I'm not sure why !FD_ISSET() works,
-    * but apparently it does.
-    */
-   socket_is_alive = !FD_ISSET(sfd, &readable_fds);
-
-   return socket_is_alive;
-#endif /* def HAVE_POLL */
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_reusable_connection
- *
- * Description :  Returns an open socket to a previously remembered
- *                open connection (if there is one).
- *
- * Parameters  :
- *          1  :  http = The destination for the connection.
- *          2  :  fwd  = The forwarder settings.
- *
- * Returns     :  JB_INVALID_SOCKET => No reusable connection found,
- *                otherwise a usable socket.
- *
- *********************************************************************/
-static jb_socket get_reusable_connection(const struct http_request *http,
-                                         const struct forward_spec *fwd)
-{
-   jb_socket sfd = JB_INVALID_SOCKET;
-   unsigned int slot = 0;
-
-   close_unusable_connections();
-
-   privoxy_mutex_lock(&connection_reuse_mutex);
-
-   for (slot = 0; slot < SZ(reusable_connection); slot++)
-   {
-      if (!reusable_connection[slot].in_use
-         && (JB_INVALID_SOCKET != reusable_connection[slot].sfd))
-      {
-         if (connection_destination_matches(&reusable_connection[slot], http, fwd))
-         {
-            reusable_connection[slot].in_use = TRUE;
-            sfd = reusable_connection[slot].sfd;
-            log_error(LOG_LEVEL_CONNECT,
-               "Found reusable socket %d for %s:%d in slot %d.",
-               sfd, reusable_connection[slot].host, reusable_connection[slot].port, slot);
-            break;
-         }
-      }
-   }
-
-   privoxy_mutex_unlock(&connection_reuse_mutex);
-
-   return sfd;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  mark_connection_unused
- *
- * Description :  Gives a remembered connection free for reuse.
- *
- * Parameters  :
- *          1  :  sfd = The socket belonging to the connection in question.
- *
- * Returns     :  TRUE => Socket found and marked as unused.
- *                FALSE => Socket not found.
- *
- *********************************************************************/
-static int mark_connection_unused(jb_socket sfd)
-{
-   unsigned int slot = 0;
-   int socket_found = FALSE;
-
-   assert(sfd != JB_INVALID_SOCKET);
-
-   privoxy_mutex_lock(&connection_reuse_mutex);
-
-   for (slot = 0; slot < SZ(reusable_connection); slot++)
-   {
-      if (reusable_connection[slot].sfd == sfd)
-      {
-         assert(reusable_connection[slot].in_use);
-         socket_found = TRUE;
-         log_error(LOG_LEVEL_CONNECT,
-            "Marking open socket %d for %s:%d in slot %d as unused.",
-            sfd, reusable_connection[slot].host,
-            reusable_connection[slot].port, slot);
-         reusable_connection[slot].in_use = 0;
-         reusable_connection[slot].timestamp = time(NULL);
-         break;
-      }
-   }
-
-   privoxy_mutex_unlock(&connection_reuse_mutex);
-
-   return socket_found;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  set_keep_alive_timeout
- *
- * Description :  Sets the timeout after which open
- *                connections will no longer be reused.
- *
- * Parameters  :
- *          1  :  timeout = The timeout in seconds.
- *
- * Returns     :  void
- *
- *********************************************************************/
-void set_keep_alive_timeout(int timeout)
-{
-   keep_alive_timeout = timeout;
-}
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-
-/*********************************************************************
- *
- * Function    :  forwarded_connect
- *
- * Description :  Connect to a specified web server, possibly via
- *                a HTTP proxy and/or a SOCKS proxy.
- *
- * Parameters  :
- *          1  :  fwd = the proxies to use when connecting.
- *          2  :  http = the http request and apropos headers
- *          3  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_INVALID_SOCKET => failure, else it is the socket file descriptor.
- *
- *********************************************************************/
-jb_socket forwarded_connect(const struct forward_spec * fwd,
-                            struct http_request *http,
-                            struct client_state *csp)
-{
-   const char * dest_host;
-   int dest_port;
-   jb_socket sfd = JB_INVALID_SOCKET;
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   sfd = get_reusable_connection(http, fwd);
-   if (JB_INVALID_SOCKET != sfd)
-   {
-      return sfd;
-   }
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-   /* Figure out if we need to connect to the web server or a HTTP proxy. */
-   if (fwd->forward_host)
-   {
-      /* HTTP proxy */
-      dest_host = fwd->forward_host;
-      dest_port = fwd->forward_port;
-   }
-   else
-   {
-      /* Web server */
-      dest_host = http->host;
-      dest_port = http->port;
-   }
-
-   /* Connect, maybe using a SOCKS proxy */
-   switch (fwd->type)
-   {
-      case SOCKS_NONE:
-         sfd = connect_to(dest_host, dest_port, csp);
-         break;
-      case SOCKS_4:
-      case SOCKS_4A:
-         sfd = socks4_connect(fwd, dest_host, dest_port, csp);
-         break;
-      case SOCKS_5:
-         sfd = socks5_connect(fwd, dest_host, dest_port, csp);
-         break;
-      default:
-         /* Should never get here */
-         log_error(LOG_LEVEL_FATAL,
-            "SOCKS4 impossible internal error - bad SOCKS type.");
-   }
-
-   if (JB_INVALID_SOCKET != sfd)
-   {
-      log_error(LOG_LEVEL_CONNECT,
-         "Created new connection to %s:%d on socket %d.",
-         http->host, http->port, sfd);
-   }
-
-   return sfd;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  socks4_connect
- *
- * Description :  Connect to the SOCKS server, and connect through
- *                it to the specified server.   This handles
- *                all the SOCKS negotiation, and returns a file
- *                descriptor for a socket which can be treated as a
- *                normal (non-SOCKS) socket.
- *
- *                Logged error messages are saved to csp->error_message
- *                and later reused by error_response() for the CGI
- *                message. strdup allocation failures are handled there.
- *
- * Parameters  :
- *          1  :  fwd = Specifies the SOCKS proxy to use.
- *          2  :  target_host = The final server to connect to.
- *          3  :  target_port = The final port to connect to.
- *          4  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_INVALID_SOCKET => failure, else a socket file descriptor.
- *
- *********************************************************************/
-static jb_socket socks4_connect(const struct forward_spec * fwd,
-                                const char * target_host,
-                                int target_port,
-                                struct client_state *csp)
-{
-   unsigned int web_server_addr;
-   char buf[BUFFER_SIZE];
-   struct socks_op    *c = (struct socks_op    *)buf;
-   struct socks_reply *s = (struct socks_reply *)buf;
-   size_t n;
-   size_t csiz;
-   jb_socket sfd;
-   int err = 0;
-   char *errstr = NULL;
-
-   if ((fwd->gateway_host == NULL) || (*fwd->gateway_host == '\0'))
-   {
-      /* XXX: Shouldn't the config file parser prevent this? */
-      errstr = "NULL gateway host specified.";
-      err = 1;
-   }
-
-   if (fwd->gateway_port <= 0)
-   {
-      errstr = "invalid gateway port specified.";
-      err = 1;
-   }
-
-   if (err)
-   {
-      log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr);
-      csp->error_message = strdup(errstr); 
-      errno = EINVAL;
-      return(JB_INVALID_SOCKET);
-   }
-
-   /* build a socks request for connection to the web server */
-
-   strlcpy(&(c->userid), socks_userid, sizeof(buf) - sizeof(struct socks_op));
-
-   csiz = sizeof(*c) + sizeof(socks_userid) - sizeof(c->userid) - sizeof(c->padding);
-
-   switch (fwd->type)
-   {
-      case SOCKS_4:
-         web_server_addr = resolve_hostname_to_ip(target_host);
-         if (web_server_addr == INADDR_NONE)
-         {
-            errstr = "could not resolve target host";
-            log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s %s", errstr, target_host);
-            err = 1;
-         }
-         else
-         {
-            web_server_addr = htonl(web_server_addr);
-         }
-         break;
-      case SOCKS_4A:
-         web_server_addr = 0x00000001;
-         n = csiz + strlen(target_host) + 1;
-         if (n > sizeof(buf))
-         {
-            errno = EINVAL;
-            errstr = "buffer cbuf too small.";
-            log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr);
-            err = 1;
-         }
-         else
-         {
-            strlcpy(buf + csiz, target_host, sizeof(buf) - sizeof(struct socks_op) - csiz);
-            /*
-             * What we forward to the socks4a server should have the
-             * size of socks_op, plus the length of the userid plus
-             * its \0 byte (which we don't have to add because the
-             * first byte of the userid is counted twice as it's also
-             * part of sock_op) minus the padding bytes (which are part
-             * of the userid as well), plus the length of the target_host
-             * (which is stored csiz bytes after the beginning of the buffer),
-             * plus another \0 byte.
-             */
-            assert(n == sizeof(struct socks_op) + strlen(&(c->userid)) - sizeof(c->padding) + strlen(buf + csiz) + 1);
-            csiz = n;
-         }
-         break;
-      default:
-         /* Should never get here */
-         log_error(LOG_LEVEL_FATAL,
-            "socks4_connect: SOCKS4 impossible internal error - bad SOCKS type.");
-         /* Not reached */
-         return(JB_INVALID_SOCKET);
-   }
-
-   if (err)
-   {
-      csp->error_message = strdup(errstr);
-      return(JB_INVALID_SOCKET);
-   }
-
-   c->vn          = 4;
-   c->cd          = 1;
-   c->dstport[0]  = (unsigned char)((target_port       >> 8  ) & 0xff);
-   c->dstport[1]  = (unsigned char)((target_port             ) & 0xff);
-   c->dstip[0]    = (unsigned char)((web_server_addr   >> 24 ) & 0xff);
-   c->dstip[1]    = (unsigned char)((web_server_addr   >> 16 ) & 0xff);
-   c->dstip[2]    = (unsigned char)((web_server_addr   >>  8 ) & 0xff);
-   c->dstip[3]    = (unsigned char)((web_server_addr         ) & 0xff);
-
-   /* pass the request to the socks server */
-   sfd = connect_to(fwd->gateway_host, fwd->gateway_port, csp);
-
-   if (sfd == JB_INVALID_SOCKET)
-   {
-      /*
-       * XXX: connect_to should fill in the exact reason.
-       * Most likely resolving the IP of the forwarder failed.
-       */
-      errstr = "connect_to failed: see logfile for details";
-      err = 1;
-   }
-   else if (write_socket(sfd, (char *)c, csiz))
-   {
-      errstr = "SOCKS4 negotiation write failed.";
-      log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr);
-      err = 1;
-      close_socket(sfd);
-   }
-   else if (read_socket(sfd, buf, sizeof(buf)) != sizeof(*s))
-   {
-      errstr = "SOCKS4 negotiation read failed.";
-      log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr);
-      err = 1;
-      close_socket(sfd);
-   }
-
-   if (err)
-   {
-      csp->error_message = strdup(errstr);      
-      return(JB_INVALID_SOCKET);
-   }
-
-   switch (s->cd)
-   {
-      case SOCKS_REQUEST_GRANTED:
-         return(sfd);
-      case SOCKS_REQUEST_REJECT:
-         errstr = "SOCKS request rejected or failed.";
-         errno = EINVAL;
-         break;
-      case SOCKS_REQUEST_IDENT_FAILED:
-         errstr = "SOCKS request rejected because "
-            "SOCKS server cannot connect to identd on the client.";
-         errno = EACCES;
-         break;
-      case SOCKS_REQUEST_IDENT_CONFLICT:
-         errstr = "SOCKS request rejected because "
-            "the client program and identd report "
-            "different user-ids.";
-         errno = EACCES;
-         break;
-      default:
-         errno = ENOENT;
-         snprintf(buf, sizeof(buf),
-            "SOCKS request rejected for reason code %d.", s->cd);
-         errstr = buf;
-   }
-
-   log_error(LOG_LEVEL_CONNECT, "socks4_connect: %s", errstr);
-   csp->error_message = strdup(errstr);
-   close_socket(sfd);
-
-   return(JB_INVALID_SOCKET);
-
-}
-
-/*********************************************************************
- *
- * Function    :  translate_socks5_error
- *
- * Description :  Translates a SOCKS errors to a string.
- *
- * Parameters  :
- *          1  :  socks_error = The error code to translate.
- *
- * Returns     :  The string translation.
- *
- *********************************************************************/
-static const char *translate_socks5_error(int socks_error)
-{
-   switch (socks_error)
-   {
-      /* XXX: these should be more descriptive */
-      case SOCKS5_REQUEST_FAILED:
-         return "SOCKS5 request failed";
-      case SOCKS5_REQUEST_DENIED:
-         return "SOCKS5 request denied";
-      case SOCKS5_REQUEST_NETWORK_UNREACHABLE:
-         return "SOCKS5 network unreachable";
-      case SOCKS5_REQUEST_HOST_UNREACHABLE:
-         return "SOCKS5 host unreachable";
-      case SOCKS5_REQUEST_CONNECTION_REFUSED:
-         return "SOCKS5 connection refused";
-      case SOCKS5_REQUEST_TTL_EXPIRED:
-         return "SOCKS5 TTL expired";
-      case SOCKS5_REQUEST_PROTOCOL_ERROR:
-         return "SOCKS5 client protocol error";
-      case SOCKS5_REQUEST_BAD_ADDRESS_TYPE:
-         return "SOCKS5 domain names unsupported";
-      case SOCKS5_REQUEST_GRANTED:
-         return "everything's peachy";
-      default:
-         return "SOCKS5 negotiation protocol error";
-   }
-}
-
-/*********************************************************************
- *
- * Function    :  socks5_connect
- *
- * Description :  Connect to the SOCKS server, and connect through
- *                it to the specified server.   This handles
- *                all the SOCKS negotiation, and returns a file
- *                descriptor for a socket which can be treated as a
- *                normal (non-SOCKS) socket.
- *
- * Parameters  :
- *          1  :  fwd = Specifies the SOCKS proxy to use.
- *          2  :  target_host = The final server to connect to.
- *          3  :  target_port = The final port to connect to.
- *          4  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_INVALID_SOCKET => failure, else a socket file descriptor.
- *
- *********************************************************************/
-static jb_socket socks5_connect(const struct forward_spec *fwd,
-                                const char *target_host,
-                                int target_port,
-                                struct client_state *csp)
-{
-   int err = 0;
-   char cbuf[300];
-   char sbuf[30];
-   size_t client_pos = 0;
-   int server_size = 0;
-   size_t hostlen = 0;
-   jb_socket sfd;
-   const char *errstr = NULL;
-
-   assert(fwd->gateway_host);
-   if ((fwd->gateway_host == NULL) || (*fwd->gateway_host == '\0'))
-   {
-      errstr = "NULL gateway host specified";
-      err = 1;
-   }
-
-   if (fwd->gateway_port <= 0)
-   {
-      /*
-       * XXX: currently this can't happen because in
-       * case of invalid gateway ports we use the defaults.
-       * Of course we really shouldn't do that.
-       */
-      errstr = "invalid gateway port specified";
-      err = 1;
-   }
-
-   hostlen = strlen(target_host);
-   if (hostlen > (size_t)255)
-   {
-      errstr = "target host name is longer than 255 characters";
-      err = 1;
-   }
-
-   if (fwd->type != SOCKS_5)
-   {
-      /* Should never get here */
-      log_error(LOG_LEVEL_FATAL,
-         "SOCKS5 impossible internal error - bad SOCKS type");
-      err = 1;
-   }
-
-   if (err)
-   {
-      errno = EINVAL;
-      assert(errstr != NULL);
-      log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr);
-      csp->error_message = strdup(errstr);
-      return(JB_INVALID_SOCKET);
-   }
-
-   /* pass the request to the socks server */
-   sfd = connect_to(fwd->gateway_host, fwd->gateway_port, csp);
-
-   if (sfd == JB_INVALID_SOCKET)
-   {
-      errstr = "socks5 server unreachable";
-      log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr);
-      csp->error_message = strdup(errstr);
-      return(JB_INVALID_SOCKET);
-   }
-
-   client_pos = 0;
-   cbuf[client_pos++] = '\x05'; /* Version */
-   cbuf[client_pos++] = '\x01'; /* One authentication method supported */
-   cbuf[client_pos++] = '\x00'; /* The no authentication authentication method */
-
-   if (write_socket(sfd, cbuf, client_pos))
-   {
-      errstr = "SOCKS5 negotiation write failed";
-      csp->error_message = strdup(errstr);
-      log_error(LOG_LEVEL_CONNECT, "%s", errstr);
-      close_socket(sfd);
-      return(JB_INVALID_SOCKET);
-   }
-
-   if (read_socket(sfd, sbuf, sizeof(sbuf)) != 2)
-   {
-      errstr = "SOCKS5 negotiation read failed";
-      err = 1;
-   }
-
-   if (!err && (sbuf[0] != '\x05'))
-   {
-      errstr = "SOCKS5 negotiation protocol version error";
-      err = 1;
-   }
-
-   if (!err && (sbuf[1] == '\xff'))
-   {
-      errstr = "SOCKS5 authentication required";
-      err = 1;
-   }
-
-   if (!err && (sbuf[1] != '\x00'))
-   {
-      errstr = "SOCKS5 negotiation protocol error";
-      err = 1;
-   }
-
-   if (err)
-   {
-      assert(errstr != NULL);
-      log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr);
-      csp->error_message = strdup(errstr);
-      close_socket(sfd);
-      errno = EINVAL;
-      return(JB_INVALID_SOCKET);
-   }
-
-   client_pos = 0;
-   cbuf[client_pos++] = '\x05'; /* Version */
-   cbuf[client_pos++] = '\x01'; /* TCP connect */
-   cbuf[client_pos++] = '\x00'; /* Reserved, must be 0x00 */
-   cbuf[client_pos++] = '\x03'; /* Address is domain name */
-   cbuf[client_pos++] = (char)(hostlen & 0xffu);
-   assert(sizeof(cbuf) - client_pos > (size_t)255);
-   /* Using strncpy because we really want the nul byte padding. */
-   strncpy(cbuf + client_pos, target_host, sizeof(cbuf) - client_pos);
-   client_pos += (hostlen & 0xffu);
-   cbuf[client_pos++] = (char)((target_port >> 8) & 0xff);
-   cbuf[client_pos++] = (char)((target_port     ) & 0xff);
-
-   if (write_socket(sfd, cbuf, client_pos))
-   {
-      errstr = "SOCKS5 negotiation read failed";
-      csp->error_message = strdup(errstr);
-      log_error(LOG_LEVEL_CONNECT, "%s", errstr);
-      close_socket(sfd);
-      errno = EINVAL;
-      return(JB_INVALID_SOCKET);
-   }
-
-   server_size = read_socket(sfd, sbuf, sizeof(sbuf));
-   if (server_size < 3)
-   {
-      errstr = "SOCKS5 negotiation read failed";
-      err = 1;
-   }
-   else if (server_size > 20)
-   {
-      /* This is somewhat unexpected but doesn't realy matter. */
-      log_error(LOG_LEVEL_CONNECT, "socks5_connect: read %d bytes "
-         "from socks server. Would have accepted up to %d.",
-         server_size, sizeof(sbuf));
-   }
-
-   if (!err && (sbuf[0] != '\x05'))
-   {
-      errstr = "SOCKS5 negotiation protocol version error";
-      err = 1;
-   }
-
-   if (!err && (sbuf[2] != '\x00'))
-   {
-      errstr = "SOCKS5 negotiation protocol error";
-      err = 1;
-   }
-
-   if (!err)
-   {
-      if (sbuf[1] == SOCKS5_REQUEST_GRANTED)
-      {
-         return(sfd);
-      }
-      errstr = translate_socks5_error(sbuf[1]);
-      err = 1;
-   }
-
-   assert(errstr != NULL);
-   csp->error_message = strdup(errstr);
-   log_error(LOG_LEVEL_CONNECT, "socks5_connect: %s", errstr);
-   close_socket(sfd);
-   errno = EINVAL;
-
-   return(JB_INVALID_SOCKET);
-
-}
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/gateway.h b/external/privoxy/gateway.h
deleted file mode 100644
index 94115f7..0000000
--- a/external/privoxy/gateway.h
+++ /dev/null
@@ -1,158 +0,0 @@
-#ifndef GATEWAY_H_INCLUDED
-#define GATEWAY_H_INCLUDED
-#define GATEWAY_H_VERSION "$Id: gateway.h,v 1.12 2008/12/24 17:06:19 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/gateway.h,v $
- *
- * Purpose     :  Contains functions to connect to a server, possibly
- *                using a "gateway" (i.e. HTTP proxy and/or SOCKS4
- *                proxy).  Also contains the list of gateway types.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: gateway.h,v $
- *    Revision 1.12  2008/12/24 17:06:19  fabiankeil
- *    Keep a thread around to timeout alive connections
- *    even if no new requests are coming in.
- *
- *    Revision 1.11  2008/11/13 09:08:42  fabiankeil
- *    Add new config option: keep-alive-timeout.
- *
- *    Revision 1.10  2008/10/09 18:21:41  fabiankeil
- *    Flush work-in-progress changes to keep outgoing connections
- *    alive where possible. Incomplete and mostly #ifdef'd out.
- *
- *    Revision 1.9  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.7  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.6  2002/03/25 22:12:45  oes
- *    Added fix for undefined INADDR_NONE on Solaris by Bart Schelstraete
- *
- *    Revision 1.5  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.4  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.3  2001/07/29 18:58:15  jongfoster
- *    Removing nested #includes, adding forward declarations for needed
- *    structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED.
- *
- *    Revision 1.2  2001/06/07 23:12:14  jongfoster
- *    Removing gateways[] list - no longer used.
- *    Replacing function pointer in struct gateway with a directly
- *    called function forwarded_connect(), which can do the common
- *    task of deciding whether to connect to the web server or HTTP
- *    proxy.
- *    Replacing struct gateway with struct forward_spec
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:54  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct forward_spec;
-struct http_request;
-struct client_state;
-
-extern jb_socket forwarded_connect(const struct forward_spec * fwd, 
-                                   struct http_request *http, 
-                                   struct client_state *csp);
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-
-/*
- * Default number of seconds after which an
- * open connection will no longer be reused.
- */
-#define DEFAULT_KEEP_ALIVE_TIMEOUT 180
-
-extern void set_keep_alive_timeout(int timeout);
-extern void initialize_reusable_connections(void);
-extern void forget_connection(jb_socket sfd);
-extern void remember_connection(jb_socket sfd,
-                                const struct http_request *http,
-                                const struct forward_spec *fwd);
-extern int close_unusable_connections(void);
-#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
-
-
-/*
- * Solaris fix
- */
-#ifndef INADDR_NONE
-#define INADDR_NONE -1
-#endif
-
-/*
- * Revision control strings from this header and associated .c file
- */
-extern const char gateway_rcs[];
-extern const char gateway_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef GATEWAY_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/genclspec.sh b/external/privoxy/genclspec.sh
deleted file mode 100755
index 376e992..0000000
--- a/external/privoxy/genclspec.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/sh
-#
-# $Id: genclspec.sh,v 1.2 2002/04/27 04:49:11 morcego Exp $
-#
-# Written by and Copyright (C) 2001 the SourceForge
-# Privoxy team. http://www.privoxy.org/
-#
-# This program is free software; you can redistribute it 
-# and/or modify it under the terms of the GNU General
-# Public License as published by the Free Software
-# Foundation; either version 2 of the License, or (at
-# your option) any later version.
-#
-# This program is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.  See the GNU General Public
-# License for more details.
-#
-# The GNU General Public License should be included with
-# this file.  If not, you can view it at
-# http://www.gnu.org/copyleft/gpl.html
-# or write to the Free Software Foundation, Inc., 59
-# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# $Log: genclspec.sh,v $
-# Revision 1.2  2002/04/27 04:49:11  morcego
-# Adding license and copyright comments.
-#
-#
-
-VERSION=`cat privoxy-rh.spec | sed -n -e 's/^Version:[ ]*//p'`
-RELEASE=`cat privoxy-rh.spec | sed -n -e 's/^Release:[ ]*//p'`
-CLTAG=${VERSION}-${RELEASE}cl
-
-PACKAGER=`rpm --eval "%{packager}"`
-if [ "${PACKAGER}" = "%{packager}" ]; then
-	PACKAGER="genclspec script <developers@xxxxxxxxxxx>"
-fi
-
-export LC_ALL=
-export LANG=
-DATETAG=`date "+%a %b %d %Y"`
-
-if [ -r privoxy-cl.spec ]; then
-	echo Old CL specfile found. Removing it.
-fi
-
-cat privoxy-rh.spec | sed -e 's/^\(Release:[ ]*[^ ]\+\)[ ]*$/\1cl/' \
-			  -e "/^%changelog/a* ${DATETAG} ${PACKAGER}" \
-			  -e "/^%changelog/a+ privoxy-${CLTAG}" \
-			  -e "/^%changelog/a- Packaging for Conectiva Linux (automatic genarated specfile)" \
-			  -e '/^%changelog/a \
-' > privoxy-cl.spec
-
diff --git a/external/privoxy/icons/ico00001.ico b/external/privoxy/icons/ico00001.ico
deleted file mode 100644
index a01ccfc..0000000
Binary files a/external/privoxy/icons/ico00001.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00002.ico b/external/privoxy/icons/ico00002.ico
deleted file mode 100644
index b7de068..0000000
Binary files a/external/privoxy/icons/ico00002.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00003.ico b/external/privoxy/icons/ico00003.ico
deleted file mode 100644
index 99e0980..0000000
Binary files a/external/privoxy/icons/ico00003.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00004.ico b/external/privoxy/icons/ico00004.ico
deleted file mode 100644
index 35b76d4..0000000
Binary files a/external/privoxy/icons/ico00004.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00005.ico b/external/privoxy/icons/ico00005.ico
deleted file mode 100644
index db9bddf..0000000
Binary files a/external/privoxy/icons/ico00005.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00006.ico b/external/privoxy/icons/ico00006.ico
deleted file mode 100644
index 5e1f3fa..0000000
Binary files a/external/privoxy/icons/ico00006.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00007.ico b/external/privoxy/icons/ico00007.ico
deleted file mode 100644
index 6ec504d..0000000
Binary files a/external/privoxy/icons/ico00007.ico and /dev/null differ
diff --git a/external/privoxy/icons/ico00008.ico b/external/privoxy/icons/ico00008.ico
deleted file mode 100644
index e6bc72f..0000000
Binary files a/external/privoxy/icons/ico00008.ico and /dev/null differ
diff --git a/external/privoxy/icons/idle.ico b/external/privoxy/icons/idle.ico
deleted file mode 100644
index 5ef20fc..0000000
Binary files a/external/privoxy/icons/idle.ico and /dev/null differ
diff --git a/external/privoxy/icons/off.ico b/external/privoxy/icons/off.ico
deleted file mode 100644
index cea8778..0000000
Binary files a/external/privoxy/icons/off.ico and /dev/null differ
diff --git a/external/privoxy/icons/os2.ico b/external/privoxy/icons/os2.ico
deleted file mode 100644
index 0ad4f56..0000000
Binary files a/external/privoxy/icons/os2.ico and /dev/null differ
diff --git a/external/privoxy/icons/os20.ico b/external/privoxy/icons/os20.ico
deleted file mode 100644
index ef5995b..0000000
Binary files a/external/privoxy/icons/os20.ico and /dev/null differ
diff --git a/external/privoxy/icons/os21.ico b/external/privoxy/icons/os21.ico
deleted file mode 100644
index cc61b61..0000000
Binary files a/external/privoxy/icons/os21.ico and /dev/null differ
diff --git a/external/privoxy/icons/os22.ico b/external/privoxy/icons/os22.ico
deleted file mode 100644
index d357dfb..0000000
Binary files a/external/privoxy/icons/os22.ico and /dev/null differ
diff --git a/external/privoxy/icons/os23.ico b/external/privoxy/icons/os23.ico
deleted file mode 100644
index 8ac037f..0000000
Binary files a/external/privoxy/icons/os23.ico and /dev/null differ
diff --git a/external/privoxy/icons/os24.ico b/external/privoxy/icons/os24.ico
deleted file mode 100644
index f2b87f7..0000000
Binary files a/external/privoxy/icons/os24.ico and /dev/null differ
diff --git a/external/privoxy/icons/os25.ico b/external/privoxy/icons/os25.ico
deleted file mode 100644
index 5bc68b5..0000000
Binary files a/external/privoxy/icons/os25.ico and /dev/null differ
diff --git a/external/privoxy/icons/os26.ico b/external/privoxy/icons/os26.ico
deleted file mode 100644
index 408d89e..0000000
Binary files a/external/privoxy/icons/os26.ico and /dev/null differ
diff --git a/external/privoxy/icons/os27.ico b/external/privoxy/icons/os27.ico
deleted file mode 100644
index 00a8814..0000000
Binary files a/external/privoxy/icons/os27.ico and /dev/null differ
diff --git a/external/privoxy/icons/os28.ico b/external/privoxy/icons/os28.ico
deleted file mode 100644
index 9153636..0000000
Binary files a/external/privoxy/icons/os28.ico and /dev/null differ
diff --git a/external/privoxy/icons/privoxy.ico b/external/privoxy/icons/privoxy.ico
deleted file mode 100644
index 4c96d0b..0000000
Binary files a/external/privoxy/icons/privoxy.ico and /dev/null differ
diff --git a/external/privoxy/install-sh b/external/privoxy/install-sh
deleted file mode 100755
index e9de238..0000000
--- a/external/privoxy/install-sh
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/external/privoxy/jarfile b/external/privoxy/jarfile
deleted file mode 100644
index e69de29..0000000
diff --git a/external/privoxy/jbsockets.c b/external/privoxy/jbsockets.c
deleted file mode 100644
index 4548ff2..0000000
--- a/external/privoxy/jbsockets.c
+++ /dev/null
@@ -1,1054 +0,0 @@
-const char jbsockets_rcs[] = "$Id: jbsockets.c,v 1.50 2008/12/20 14:53:55 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/jbsockets.c,v $
- *
- * Purpose     :  Contains wrappers for system-specific sockets code,
- *                so that the rest of Junkbuster can be more
- *                OS-independent.  Contains #ifdefs to make this work
- *                on many platforms.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: jbsockets.c,v $
- *    Revision 1.50  2008/12/20 14:53:55  fabiankeil
- *    Add config option socket-timeout to control the time
- *    Privoxy waits for data to arrive on a socket. Useful
- *    in case of stale ssh tunnels or when fuzz-testing.
- *
- *    Revision 1.49  2008/11/10 17:03:57  fabiankeil
- *    Fix a gcc44 warning and remove a now-obsolete cast.
- *
- *    Revision 1.48  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.47  2008/03/26 18:07:07  fabiankeil
- *    Add hostname directive. Closes PR#1918189.
- *
- *    Revision 1.46  2008/03/21 11:13:57  fabiankeil
- *    Only gather host information if it's actually needed.
- *    Also move the code out of accept_connection() so it's less likely
- *    to delay other incoming connections if the host is misconfigured.
- *
- *    Revision 1.45  2007/09/30 16:59:22  fabiankeil
- *    Set the maximum listen() backlog to 128. Apparently SOMAXCONN is
- *    neither high enough, nor a hard limit on mingw32. Again for BR#1795281.
- *
- *    Revision 1.44  2007/09/15 13:01:31  fabiankeil
- *    Increase listen() backlog to SOMAXCONN (or 128) to decrease
- *    chances of dropped connections under load. Problem reported
- *    and fix suggested by nobody in BR#1795281.
- *
- *    Revision 1.43  2007/06/01 18:16:36  fabiankeil
- *    Use the same mutex for gethostbyname() and gethostbyaddr() to prevent
- *    deadlocks and crashes on OpenBSD and possibly other OS with neither
- *    gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174.
- *    Thanks to Ralf Horstmann for report and solution.
- *
- *    Revision 1.42  2007/04/01 17:37:07  fabiankeil
- *    - Add DNS retries for Solaris and other systems
- *      whose gethostbyname_r version takes five arguments.
- *    - Move maximum number of DNS retries into a macro.
- *
- *    Revision 1.41  2006/11/13 19:05:51  fabiankeil
- *    Make pthread mutex locking more generic. Instead of
- *    checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- *    and use mutex locking unless there is an _r function
- *    available. Better safe than sorry.
- *
- *    Fixes "./configure --disable-pthread" and should result
- *    in less threading-related problems on pthread-using platforms,
- *    but it still doesn't fix BR#1122404.
- *
- *    Revision 1.40  2006/09/02 15:36:42  fabiankeil
- *    Follow the OpenBSD port's lead and protect the resolve
- *    functions on OpenBSD as well.
- *
- *    Revision 1.39  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.38  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.35.2.8  2006/01/21 16:16:08  david__schmidt
- *    Thanks to  Edward Carrel for his patch to modernize OSX'spthreads support.  See bug #1409623.
- *
- *    Revision 1.35.2.7  2005/05/07 21:50:55  david__schmidt
- *    A few memory leaks plugged (mostly on error paths)
- *
- *    Revision 1.35.2.6  2003/12/17 16:34:40  oes
- *    Cosmetics
- *
- *    Revision 1.35.2.5  2003/04/29 11:32:54  oes
- *    Don't rely on h_addr being non-NULL after gethostbyname.
- *    Works around an oddness in Max OSX and closes bug #724796
- *
- *    Revision 1.35.2.4  2003/04/04 12:40:20  oes
- *    Made sure the errno set by bind, not close[socket] is used in
- *    bind_port. Probably fixes bugs #713777, #705562.
- *
- *    Revision 1.35.2.3  2003/03/07 03:41:04  david__schmidt
- *    Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX.  Hopefully this will take care of all of those pesky crash reports.
- *
- *    Revision 1.35.2.2  2002/11/20 14:37:24  oes
- *    Fixed Win32 error logging in bind_port.
- *    Thanks to Oliver Stoeneberg for the hint.
- *
- *    Revision 1.35.2.1  2002/05/26 23:41:27  joergs
- *    AmigaOS: Fixed wrong type of len in write_socket()
- *
- *    Revision 1.35  2002/04/26 15:50:04  joergs
- *    AmigaOS: No socklen_t, added AMIGA to the systems using int instead.
- *
- *    Revision 1.34  2002/04/08 20:31:41  swa
- *    fixed JB spelling
- *
- *    Revision 1.33  2002/04/03 16:02:18  gliptak
- *    Correcting compile warning with older gcc
- *
- *    Revision 1.32  2002/03/31 17:18:59  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.31  2002/03/29 03:33:13  david__schmidt
- *    Fix Mac OSX compiler warnings
- *
- *    Revision 1.30  2002/03/27 14:32:43  david__schmidt
- *    More compiler warning message maintenance
- *
- *    Revision 1.29  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.28  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.27  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.26  2002/03/11 22:07:02  david__schmidt
- *    OS/2 port maintenance:
- *    - Fixed EMX build - it had decayed a little
- *    - Fixed inexplicable crash during FD_ZERO - must be due to a bad macro.
- *      substituted a memset for now.
- *
- *    Revision 1.25  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.24  2002/03/07 03:51:36  oes
- *     - Improved handling of failed DNS lookups
- *     - Fixed compiler warnings etc
- *
- *    Revision 1.23  2002/03/05 00:36:01  jongfoster
- *    Fixing bug 514988 - unable to restart Junkbuster
- *
- *    Revision 1.22  2002/03/04 02:08:02  david__schmidt
- *    Enable web editing of actions file on OS/2 (it had been broken all this time!)
- *
- *    Revision 1.21  2002/01/09 14:32:33  oes
- *    Added support for gethostbyname_r and gethostbyaddr_r.
- *
- *    Revision 1.20  2001/11/16 00:48:48  jongfoster
- *    Enabling duplicate-socket detection for all platforms, not
- *    just Win32.
- *
- *    Revision 1.19  2001/10/25 03:40:47  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.18  2001/09/21 23:02:02  david__schmidt
- *    Cleaning up 2 compiler warnings on OS/2.
- *
- *    Revision 1.17  2001/09/13 20:11:46  jongfoster
- *    Fixing 2 compiler warnings under Win32
- *
- *    Revision 1.16  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.15  2001/07/29 17:40:43  jongfoster
- *    Fixed compiler warning by adding a cast
- *
- *    Revision 1.14  2001/07/18 13:47:59  oes
- *    Eliminated dirty hack for getsockbyname()
- *
- *    Revision 1.13  2001/07/15 13:56:57  jongfoster
- *    Removing unused local variable.
- *
- *    Revision 1.12  2001/07/01 17:04:11  oes
- *    Bugfix: accept_connection no longer uses the obsolete hstrerror() function
- *
- *    Revision 1.11  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.10  2001/06/29 13:29:15  oes
- *    - Added remote (server) host IP to csp->http->host_ip_addr_str
- *    - Added detection of local socket IP and fqdn
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.9  2001/06/07 23:06:09  jongfoster
- *    The host parameter to connect_to() is now const.
- *
- *    Revision 1.8  2001/06/03 19:12:07  oes
- *    filled comment
- *
- *    Revision 1.7  2001/05/28 16:14:00  jongfoster
- *    Fixing bug in LOG_LEVEL_LOG
- *
- *    Revision 1.6  2001/05/26 17:28:32  jongfoster
- *    Fixed LOG_LEVEL_LOG
- *
- *    Revision 1.5  2001/05/26 15:26:15  jongfoster
- *    ACL feature now provides more security by immediately dropping
- *    connections from untrusted hosts.
- *
- *    Revision 1.4  2001/05/26 00:37:42  jongfoster
- *    Cosmetic indentation correction.
- *
- *    Revision 1.3  2001/05/25 21:57:54  jongfoster
- *    Now gives a warning under Windows if you try to bind
- *    it to a port that's already in use.
- *
- *    Revision 1.2  2001/05/17 23:01:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:54  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/types.h>
-
-#ifdef _WIN32
-
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-#include <sys/timeb.h>
-#include <io.h>
-
-#else
-
-#ifndef __OS2__
-#include <unistd.h>
-#endif
-#include <sys/time.h>
-#include <netinet/in.h>
-#include <sys/ioctl.h>
-#include <netdb.h>
-#include <sys/socket.h>
-
-#ifndef __BEOS__
-#include <netinet/tcp.h>
-#ifndef __OS2__
-#include <arpa/inet.h>
-#endif
-#else
-#include <socket.h>
-#endif
-
-#if defined(__EMX__) || defined (__OS2__)
-#include <sys/select.h>  /* OS/2/EMX needs a little help with select */
-#ifdef __OS2__
-#include <nerrno.h>
-#endif
-#endif
-
-#endif
-
-#include "project.h"
-
-#ifdef FEATURE_PTHREAD
-#include "jcc.h"
-/* jcc.h is for mutex semaphores only */
-#endif /* def FEATURE_PTHREAD */
-
-#include "jbsockets.h"
-#include "filters.h"
-#include "errlog.h"
-
-const char jbsockets_h_rcs[] = JBSOCKETS_H_VERSION;
-
-/*
- * Maximum number of gethostbyname(_r) retries in case of
- * soft errors (TRY_AGAIN).
- * XXX: Does it make sense to make this a config option?
- */
-#define MAX_DNS_RETRIES 10
-
-#define MAX_LISTEN_BACKLOG 128
-
-
-/*********************************************************************
- *
- * Function    :  connect_to
- *
- * Description :  Open a socket and connect to it.  Will check
- *                that this is allowed according to ACL.
- *
- * Parameters  :
- *          1  :  host = hostname to connect to
- *          2  :  portnum = port to connent on (XXX: should be unsigned)
- *          3  :  csp = Current client state (buffers, headers, etc...)
- *                      Not modified, only used for source IP and ACL.
- *
- * Returns     :  JB_INVALID_SOCKET => failure, else it is the socket
- *                file descriptor.
- *
- *********************************************************************/
-jb_socket connect_to(const char *host, int portnum, struct client_state *csp)
-{
-   struct sockaddr_in inaddr;
-   jb_socket fd;
-   unsigned int addr;
-   fd_set wfds;
-   struct timeval tv[1];
-#if !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA)
-   int   flags;
-#endif /* !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) */
-
-#ifdef FEATURE_ACL
-   struct access_control_addr dst[1];
-#endif /* def FEATURE_ACL */
-
-   memset((char *)&inaddr, 0, sizeof inaddr);
-
-   if ((addr = resolve_hostname_to_ip(host)) == INADDR_NONE)
-   {
-      csp->http->host_ip_addr_str = strdup("unknown");
-      return(JB_INVALID_SOCKET);
-   }
-
-#ifdef FEATURE_ACL
-   dst->addr = ntohl(addr);
-   dst->port = portnum;
-
-   if (block_acl(dst, csp))
-   {
-#ifdef __OS2__
-      errno = SOCEPERM;
-#else
-      errno = EPERM;
-#endif
-      return(JB_INVALID_SOCKET);
-   }
-#endif /* def FEATURE_ACL */
-
-   inaddr.sin_addr.s_addr = addr;
-   inaddr.sin_family      = AF_INET;
-   csp->http->host_ip_addr_str = strdup(inet_ntoa(inaddr.sin_addr));
-
-#ifndef _WIN32
-   if (sizeof(inaddr.sin_port) == sizeof(short))
-#endif /* ndef _WIN32 */
-   {
-      inaddr.sin_port = htons((unsigned short) portnum);
-   }
-#ifndef _WIN32
-   else
-   {
-      inaddr.sin_port = htonl((unsigned long)portnum);
-   }
-#endif /* ndef _WIN32 */
-
-#ifdef _WIN32
-   if ((fd = socket(inaddr.sin_family, SOCK_STREAM, 0)) == JB_INVALID_SOCKET)
-#else
-   if ((fd = socket(inaddr.sin_family, SOCK_STREAM, 0)) < 0)
-#endif
-   {
-      return(JB_INVALID_SOCKET);
-   }
-
-#ifdef TCP_NODELAY
-   {  /* turn off TCP coalescence */
-      int mi = 1;
-      setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, (char *) &mi, sizeof (int));
-   }
-#endif /* def TCP_NODELAY */
-
-#if !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__)
-   if ((flags = fcntl(fd, F_GETFL, 0)) != -1)
-   {
-      flags |= O_NDELAY;
-      fcntl(fd, F_SETFL, flags);
-   }
-#endif /* !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) */
-
-   while (connect(fd, (struct sockaddr *) & inaddr, sizeof inaddr) == JB_INVALID_SOCKET)
-   {
-#ifdef _WIN32
-      if (errno == WSAEINPROGRESS)
-#elif __OS2__ 
-      if (sock_errno() == EINPROGRESS)
-#else /* ifndef _WIN32 */
-      if (errno == EINPROGRESS)
-#endif /* ndef _WIN32 || __OS2__ */
-      {
-         break;
-      }
-
-#ifdef __OS2__ 
-      if (sock_errno() != EINTR)
-#else
-      if (errno != EINTR)
-#endif /* __OS2__ */
-      {
-         close_socket(fd);
-         return(JB_INVALID_SOCKET);
-      }
-   }
-
-#if !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__)
-   if (flags != -1)
-   {
-      flags &= ~O_NDELAY;
-      fcntl(fd, F_SETFL, flags);
-   }
-#endif /* !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__) */
-
-   /* wait for connection to complete */
-   FD_ZERO(&wfds);
-   FD_SET(fd, &wfds);
-
-   tv->tv_sec  = 30;
-   tv->tv_usec = 0;
-
-   /* MS Windows uses int, not SOCKET, for the 1st arg of select(). Wierd! */
-   if (select((int)fd + 1, NULL, &wfds, NULL, tv) <= 0)
-   {
-      close_socket(fd);
-      return(JB_INVALID_SOCKET);
-   }
-   return(fd);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  write_socket
- *
- * Description :  Write the contents of buf (for n bytes) to socket fd.
- *
- * Parameters  :
- *          1  :  fd = file descriptor (aka. handle) of socket to write to.
- *          2  :  buf = pointer to data to be written.
- *          3  :  len = length of data to be written to the socket "fd".
- *
- * Returns     :  0 on success (entire buffer sent).
- *                nonzero on error.
- *
- *********************************************************************/
-#ifdef AMIGA
-int write_socket(jb_socket fd, const char *buf, ssize_t len)
-#else
-int write_socket(jb_socket fd, const char *buf, size_t len)
-#endif
-{
-   if (len == 0)
-   {
-      return 0;
-   }
-
-   if (len < 0) /* constant condition - size_t isn't ever negative */ 
-   {
-      return 1;
-   }
-
-   log_error(LOG_LEVEL_LOG, "%N", len, buf);
-
-#if defined(_WIN32)
-   return (send(fd, buf, (int)len, 0) != (int)len);
-#elif defined(__BEOS__) || defined(AMIGA)
-   return (send(fd, buf, len, 0) != len);
-#elif defined(__OS2__)
-   /*
-    * Break the data up into SOCKET_SEND_MAX chunks for sending...
-    * OS/2 seemed to complain when the chunks were too large.
-    */
-#define SOCKET_SEND_MAX 65000
-   {
-      int write_len = 0, send_len, send_rc = 0, i = 0;
-      while ((i < len) && (send_rc != -1))
-      {
-         if ((i + SOCKET_SEND_MAX) > len)
-            send_len = len - i;
-         else
-            send_len = SOCKET_SEND_MAX;
-         send_rc = send(fd,(char*)buf + i, send_len, 0);
-         if (send_rc == -1)
-            return 1;
-         i = i + send_len;
-      }
-      return 0;
-   }
-#else
-   return (write(fd, buf, len) != len);
-#endif
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  read_socket
- *
- * Description :  Read from a TCP/IP socket in a platform independent way.
- *
- * Parameters  :
- *          1  :  fd = file descriptor of the socket to read
- *          2  :  buf = pointer to buffer where data will be written
- *                Must be >= len bytes long.
- *          3  :  len = maximum number of bytes to read
- *
- * Returns     :  On success, the number of bytes read is returned (zero
- *                indicates end of file), and the file position is advanced
- *                by this number.  It is not an error if this number is
- *                smaller than the number of bytes requested; this may hap-
- *                pen for example because fewer bytes are actually available
- *                right now (maybe because we were close to end-of-file, or
- *                because we are reading from a pipe, or from a terminal,
- *                or because read() was interrupted by a signal).  On error,
- *                -1 is returned, and errno is set appropriately.  In this
- *                case it is left unspecified whether the file position (if
- *                any) changes.
- *
- *********************************************************************/
-int read_socket(jb_socket fd, char *buf, int len)
-{
-   if (len <= 0)
-   {
-      return(0);
-   }
-
-#if defined(_WIN32)
-   return(recv(fd, buf, len, 0));
-#elif defined(__BEOS__) || defined(AMIGA) || defined(__OS2__)
-   return(recv(fd, buf, (size_t)len, 0));
-#else
-   return(read(fd, buf, (size_t)len));
-#endif
-}
-
-
-/*********************************************************************
- *
- * Function    :  data_is_available
- *
- * Description :  Waits for data to arrive on a socket.
- *
- * Parameters  :
- *          1  :  fd = file descriptor of the socket to read
- *          2  :  seconds_to_wait = number of seconds after which we give up.
- *
- * Returns     :  TRUE if data arrived in time,
- *                FALSE otherwise.
- *
- *********************************************************************/
-int data_is_available(jb_socket fd, int seconds_to_wait)
-{
-   fd_set rfds;
-   struct timeval timeout;
-   int n;
-
-   memset(&timeout, 0, sizeof(timeout));
-   timeout.tv_sec = seconds_to_wait;
-
-#ifdef __OS2__
-   /* Copy and pasted from jcc.c ... */
-   memset(&rfds, 0, sizeof(fd_set));
-#else
-   FD_ZERO(&rfds);
-#endif
-   FD_SET(fd, &rfds);
-
-   n = select(fd+1, &rfds, NULL, NULL, &timeout);
-
-   /*
-    * XXX: Do we care about the different error conditions?
-    */
-   return (n == 1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  close_socket
- *
- * Description :  Closes a TCP/IP socket
- *
- * Parameters  :
- *          1  :  fd = file descriptor of socket to be closed
- *
- * Returns     :  void
- *
- *********************************************************************/
-void close_socket(jb_socket fd)
-{
-#if defined(_WIN32) || defined(__BEOS__)
-   closesocket(fd);
-#elif defined(AMIGA)
-   CloseSocket(fd); 
-#elif defined(__OS2__)
-   soclose(fd);
-#else
-   close(fd);
-#endif
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  bind_port
- *
- * Description :  Call socket, set socket options, and listen.
- *                Called by listen_loop to "boot up" our proxy address.
- *
- * Parameters  :
- *          1  :  hostnam = TCP/IP address to bind/listen to
- *          2  :  portnum = port to listen on
- *          3  :  pfd = pointer used to return file descriptor.
- *
- * Returns     :  if success, returns 0 and sets *pfd.
- *                if failure, returns -3 if address is in use,
- *                                    -2 if address unresolvable,
- *                                    -1 otherwise
- *********************************************************************/
-int bind_port(const char *hostnam, int portnum, jb_socket *pfd)
-{
-   struct sockaddr_in inaddr;
-   jb_socket fd;
-#ifndef _WIN32
-   int one = 1;
-#endif /* ndef _WIN32 */
-
-   *pfd = JB_INVALID_SOCKET;
-
-   memset((char *)&inaddr, '\0', sizeof inaddr);
-
-   inaddr.sin_family      = AF_INET;
-   inaddr.sin_addr.s_addr = resolve_hostname_to_ip(hostnam);
-
-   if (inaddr.sin_addr.s_addr == INADDR_NONE)
-   {
-      return(-2);
-   }
-
-#ifndef _WIN32
-   if (sizeof(inaddr.sin_port) == sizeof(short))
-#endif /* ndef _WIN32 */
-   {
-      inaddr.sin_port = htons((unsigned short) portnum);
-   }
-#ifndef _WIN32
-   else
-   {
-      inaddr.sin_port = htonl((unsigned long) portnum);
-   }
-#endif /* ndef _WIN32 */
-
-   fd = socket(AF_INET, SOCK_STREAM, 0);
-
-#ifdef _WIN32
-   if (fd == JB_INVALID_SOCKET)
-#else
-   if (fd < 0)
-#endif
-   {
-      return(-1);
-   }
-
-#ifndef _WIN32
-   /*
-    * This is not needed for Win32 - in fact, it stops
-    * duplicate instances of Privoxy from being caught.
-    *
-    * On UNIX, we assume the user is sensible enough not
-    * to start Privoxy multiple times on the same IP.
-    * Without this, stopping and restarting Privoxy
-    * from a script fails.
-    * Note: SO_REUSEADDR is meant to only take over
-    * sockets which are *not* in listen state in Linux,
-    * e.g. sockets in TIME_WAIT. YMMV.
-    */
-   setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (char *)&one, sizeof(one));
-#endif /* ndef _WIN32 */
-
-   if (bind(fd, (struct sockaddr *)&inaddr, sizeof(inaddr)) < 0)
-   {
-#ifdef _WIN32
-      errno = WSAGetLastError();
-      if (errno == WSAEADDRINUSE)
-#else
-      if (errno == EADDRINUSE)
-#endif
-      {
-         close_socket(fd);
-         return(-3);
-      }
-      else
-      {
-         close_socket(fd);
-         return(-1);
-      }
-   }
-
-   while (listen(fd, MAX_LISTEN_BACKLOG) == -1)
-   {
-      if (errno != EINTR)
-      {
-         return(-1);
-      }
-   }
-
-   *pfd = fd;
-   return 0;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_host_information
- *
- * Description :  Determines the IP address the client used to
- *                reach us and the hostname associated with it.
- *
- *                XXX: Most of the code has been copy and pasted
- *                from accept_connection() and not all of the
- *                ifdefs paths have been tested afterwards.
- *
- * Parameters  :
- *          1  :  afd = File descriptor returned from accept().
- *          2  :  ip_address = Pointer to return the pointer to
- *                             the ip address string.
- *          3  :  hostname =   Pointer to return the pointer to
- *                             the hostname or NULL if the caller
- *                             isn't interested in it.
- *
- * Returns     :  void.
- *
- *********************************************************************/
-void get_host_information(jb_socket afd, char **ip_address, char **hostname)
-{
-   struct sockaddr_in server;
-   struct hostent *host = NULL;
-#if defined(_WIN32) || defined(__OS2__) || defined(__APPLE_CC__) || defined(AMIGA)
-   /* according to accept_connection() this fixes a warning. */
-   int s_length;
-#else
-   socklen_t s_length;
-#endif
-#if defined(HAVE_GETHOSTBYADDR_R_8_ARGS) ||  defined(HAVE_GETHOSTBYADDR_R_7_ARGS) || defined(HAVE_GETHOSTBYADDR_R_5_ARGS)
-   struct hostent result;
-#if defined(HAVE_GETHOSTBYADDR_R_5_ARGS)
-   struct hostent_data hdata;
-#else
-   char hbuf[HOSTENT_BUFFER_SIZE];
-   int thd_err;
-#endif /* def HAVE_GETHOSTBYADDR_R_5_ARGS */
-#endif /* def HAVE_GETHOSTBYADDR_R_(8|7|5)_ARGS */
-   s_length = sizeof(server);
-
-   if (NULL != hostname)
-   {
-      *hostname = NULL;
-   }
-   *ip_address = NULL;
-
-   if (!getsockname(afd, (struct sockaddr *) &server, &s_length))
-   {
-      *ip_address = strdup(inet_ntoa(server.sin_addr));
-
-      if (NULL == hostname)
-      {
-         /*
-          * We're done here, the caller isn't
-          * interested in knowing the hostname.
-          */
-         return;
-      }
-#if defined(HAVE_GETHOSTBYADDR_R_8_ARGS)
-      gethostbyaddr_r((const char *)&server.sin_addr,
-                      sizeof(server.sin_addr), AF_INET,
-                      &result, hbuf, HOSTENT_BUFFER_SIZE,
-                      &host, &thd_err);
-#elif defined(HAVE_GETHOSTBYADDR_R_7_ARGS)
-      host = gethostbyaddr_r((const char *)&server.sin_addr,
-                      sizeof(server.sin_addr), AF_INET,
-                      &result, hbuf, HOSTENT_BUFFER_SIZE, &thd_err);
-#elif defined(HAVE_GETHOSTBYADDR_R_5_ARGS)
-      if (0 == gethostbyaddr_r((const char *)&server.sin_addr,
-                               sizeof(server.sin_addr), AF_INET,
-                               &result, &hdata))
-      {
-         host = &result;
-      }
-      else
-      {
-         host = NULL;
-      }
-#elif FEATURE_PTHREAD
-      privoxy_mutex_lock(&resolver_mutex);
-      host = gethostbyaddr((const char *)&server.sin_addr, 
-                           sizeof(server.sin_addr), AF_INET);
-      privoxy_mutex_unlock(&resolver_mutex);
-#else
-      host = gethostbyaddr((const char *)&server.sin_addr, 
-                           sizeof(server.sin_addr), AF_INET);
-#endif
-      if (host == NULL)
-      {
-         log_error(LOG_LEVEL_ERROR, "Unable to get my own hostname: %E\n");
-      }
-      else
-      {
-         *hostname = strdup(host->h_name);
-      }
-   }
-
-   return;
-}
-
-
-/*********************************************************************
- *
- * Function    :  accept_connection
- *
- * Description :  Accepts a connection on a socket.  Socket must have
- *                been created using bind_port().
- *
- * Parameters  :
- *          1  :  csp = Client state, cfd, ip_addr_str, and 
- *                ip_addr_long will be set by this routine.
- *          2  :  fd  = file descriptor returned from bind_port
- *
- * Returns     :  when a connection is accepted, it returns 1 (TRUE).
- *                On an error it returns 0 (FALSE).
- *
- *********************************************************************/
-int accept_connection(struct client_state * csp, jb_socket fd)
-{
-   struct sockaddr_in client;
-   jb_socket afd;
-#if defined(_WIN32) || defined(__OS2__) || defined(__APPLE_CC__) || defined(AMIGA)
-   /* Wierdness - fix a warning. */
-   int c_length;
-#else
-   socklen_t c_length;
-#endif
-
-   c_length = sizeof(client);
-
-#ifdef _WIN32
-   afd = accept (fd, (struct sockaddr *) &client, &c_length);
-   if (afd == JB_INVALID_SOCKET)
-   {
-      return 0;
-   }
-#else
-   do
-   {
-      afd = accept (fd, (struct sockaddr *) &client, &c_length);
-   } while (afd < 1 && errno == EINTR);
-   if (afd < 0)
-   {
-      return 0;
-   }
-#endif
-
-   csp->cfd = afd;
-   csp->ip_addr_str  = strdup(inet_ntoa(client.sin_addr));
-   csp->ip_addr_long = ntohl(client.sin_addr.s_addr);
-
-   return 1;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  resolve_hostname_to_ip
- *
- * Description :  Resolve a hostname to an internet tcp/ip address.
- *                NULL or an empty string resolve to INADDR_ANY.
- *
- * Parameters  :
- *          1  :  host = hostname to resolve
- *
- * Returns     :  INADDR_NONE => failure, INADDR_ANY or tcp/ip address if succesful.
- *
- *********************************************************************/
-unsigned long resolve_hostname_to_ip(const char *host)
-{
-   struct sockaddr_in inaddr;
-   struct hostent *hostp;
-   unsigned int dns_retries = 0;
-#if defined(HAVE_GETHOSTBYNAME_R_6_ARGS) || defined(HAVE_GETHOSTBYNAME_R_5_ARGS) || defined(HAVE_GETHOSTBYNAME_R_3_ARGS)
-   struct hostent result;
-#if defined(HAVE_GETHOSTBYNAME_R_6_ARGS) || defined(HAVE_GETHOSTBYNAME_R_5_ARGS)
-   char hbuf[HOSTENT_BUFFER_SIZE];
-   int thd_err;
-#else /* defined(HAVE_GETHOSTBYNAME_R_3_ARGS) */
-   struct hostent_data hdata;
-#endif /* def HAVE_GETHOSTBYNAME_R_(6|5)_ARGS */
-#endif /* def HAVE_GETHOSTBYNAME_R_(6|5|3)_ARGS */
-
-   if ((host == NULL) || (*host == '\0'))
-   {
-      return(INADDR_ANY);
-   }
-
-   memset((char *) &inaddr, 0, sizeof inaddr);
-
-   if ((inaddr.sin_addr.s_addr = inet_addr(host)) == -1)
-   {
-#if defined(HAVE_GETHOSTBYNAME_R_6_ARGS)
-      while (gethostbyname_r(host, &result, hbuf,
-                HOSTENT_BUFFER_SIZE, &hostp, &thd_err)
-             && (thd_err == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES))
-      {   
-         log_error(LOG_LEVEL_ERROR,
-            "Timeout #%u while trying to resolve %s. Trying again.",
-            dns_retries, host);
-      }
-#elif defined(HAVE_GETHOSTBYNAME_R_5_ARGS)
-      while (NULL == (hostp = gethostbyname_r(host, &result,
-                                 hbuf, HOSTENT_BUFFER_SIZE, &thd_err))
-             && (thd_err == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES))
-      {   
-         log_error(LOG_LEVEL_ERROR,
-            "Timeout #%u while trying to resolve %s. Trying again.",
-            dns_retries, host);
-      }
-#elif defined(HAVE_GETHOSTBYNAME_R_3_ARGS)
-      /*
-       * XXX: Doesn't retry in case of soft errors.
-       * Does this gethostbyname_r version set h_errno?
-       */
-      if (0 == gethostbyname_r(host, &result, &hdata))
-      {
-         hostp = &result;
-      }
-      else
-      {
-         hostp = NULL;
-      }
-#elif FEATURE_PTHREAD
-      privoxy_mutex_lock(&resolver_mutex);
-      while (NULL == (hostp = gethostbyname(host))
-             && (h_errno == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES))
-      {   
-         log_error(LOG_LEVEL_ERROR,
-            "Timeout #%u while trying to resolve %s. Trying again.",
-            dns_retries, host);
-      }
-      privoxy_mutex_unlock(&resolver_mutex);
-#else
-      while (NULL == (hostp = gethostbyname(host))
-             && (h_errno == TRY_AGAIN) && (dns_retries++ < MAX_DNS_RETRIES))
-      {
-         log_error(LOG_LEVEL_ERROR,
-            "Timeout #%u while trying to resolve %s. Trying again.",
-            dns_retries, host);
-      }
-#endif /* def HAVE_GETHOSTBYNAME_R_(6|5|3)_ARGS */
-      /*
-       * On Mac OSX, if a domain exists but doesn't have a type A
-       * record associated with it, the h_addr member of the struct
-       * hostent returned by gethostbyname is NULL, even if h_length
-       * is 4. Therefore the second test below.
-       */
-      if (hostp == NULL || hostp->h_addr == NULL)
-      {
-         errno = EINVAL;
-         log_error(LOG_LEVEL_ERROR, "could not resolve hostname %s", host);
-         return(INADDR_NONE);
-      }
-      if (hostp->h_addrtype != AF_INET)
-      {
-#ifdef _WIN32
-         errno = WSAEPROTOTYPE;
-#else
-         errno = EPROTOTYPE;
-#endif 
-         log_error(LOG_LEVEL_ERROR, "hostname %s resolves to unknown address type.", host);
-         return(INADDR_NONE);
-      }
-      memcpy(
-         (char *) &inaddr.sin_addr,
-         (char *) hostp->h_addr,
-         sizeof(inaddr.sin_addr)
-      );
-   }
-   return(inaddr.sin_addr.s_addr);
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/jbsockets.h b/external/privoxy/jbsockets.h
deleted file mode 100644
index 115cb6a..0000000
--- a/external/privoxy/jbsockets.h
+++ /dev/null
@@ -1,149 +0,0 @@
-#ifndef JBSOCKETS_H_INCLUDED
-#define JBSOCKETS_H_INCLUDED
-#define JBSOCKETS_H_VERSION "$Id: jbsockets.h,v 1.14 2008/12/20 14:53:55 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/jbsockets.h,v $
- *
- * Purpose     :  Contains wrappers for system-specific sockets code,
- *                so that the rest of Junkbuster can be more
- *                OS-independent.  Contains #ifdefs to make this work
- *                on many platforms.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: jbsockets.h,v $
- *    Revision 1.14  2008/12/20 14:53:55  fabiankeil
- *    Add config option socket-timeout to control the time
- *    Privoxy waits for data to arrive on a socket. Useful
- *    in case of stale ssh tunnels or when fuzz-testing.
- *
- *    Revision 1.13  2008/03/21 11:13:59  fabiankeil
- *    Only gather host information if it's actually needed.
- *    Also move the code out of accept_connection() so it's less likely
- *    to delay other incoming connections if the host is misconfigured.
- *
- *    Revision 1.12  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.9.2.1  2002/05/26 23:41:27  joergs
- *    AmigaOS: Fixed wrong type of len in write_socket()
- *
- *    Revision 1.9  2002/04/08 20:31:41  swa
- *    fixed JB spelling
- *
- *    Revision 1.8  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.7  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.6  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.5  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.4  2002/03/07 03:51:36  oes
- *     - Improved handling of failed DNS lookups
- *     - Fixed compiler warnings etc
- *
- *    Revision 1.3  2001/07/29 19:01:11  jongfoster
- *    Changed _FILENAME_H to FILENAME_H_INCLUDED.
- *    Added forward declarations for needed structures.
- *
- *    Revision 1.2  2001/06/07 23:06:09  jongfoster
- *    The host parameter to connect_to() is now const.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:54  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct client_state;
-
-extern jb_socket connect_to(const char *host, int portnum, struct client_state *csp);
-#ifdef AMIGA
-extern int write_socket(jb_socket fd, const char *buf, ssize_t n);
-#else
-extern int write_socket(jb_socket fd, const char *buf, size_t n);
-#endif
-extern int read_socket(jb_socket fd, char *buf, int n);
-extern int data_is_available(jb_socket fd, int seconds_to_wait);
-extern void close_socket(jb_socket fd);
-
-extern int bind_port(const char *hostnam, int portnum, jb_socket *pfd);
-extern int accept_connection(struct client_state * csp, jb_socket fd);
-extern void get_host_information(jb_socket afd, char **ip_address, char **hostname);
-
-extern unsigned long resolve_hostname_to_ip(const char *host);
-
-/* Revision control strings from this header and associated .c file */
-extern const char jbsockets_rcs[];
-extern const char jbsockets_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef JBSOCKETS_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/jcc.c b/external/privoxy/jcc.c
deleted file mode 100644
index 1007128..0000000
--- a/external/privoxy/jcc.c
+++ /dev/null
@@ -1,4486 +0,0 @@
-const char jcc_rcs[] = "$Id: jcc.c,v 1.235 2009/03/18 21:01:20 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/jcc.c,v $
- *
- * Purpose     :  Main file.  Contains main() method, main loop, and
- *                the main connection-handling function.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: jcc.c,v $
- *    Revision 1.235  2009/03/18 21:01:20  fabiankeil
- *    Comment fix. Spotted by Roland.
- *
- *    Revision 1.234  2009/03/18 20:48:42  fabiankeil
- *    If the --no-daemon option is used, enable LOG_LEVEL_INFO
- *    before the config file has been parsed (as we always did).
- *
- *    Revision 1.233  2009/03/13 14:10:07  fabiankeil
- *    Fix some more harmless warnings on amd64.
- *
- *    Revision 1.232  2009/03/08 19:29:16  fabiankeil
- *    Reinitialize the timeout structure every time before passing
- *    it to select(). Apparently some implementations mess with it.
- *    Probably fixes #2669131 reported by cyberpatrol.
- *
- *    Revision 1.231  2009/03/08 14:19:23  fabiankeil
- *    Fix justified (but harmless) compiler warnings
- *    on platforms where sizeof(int) < sizeof(long).
- *
- *    Revision 1.230  2009/03/07 13:09:17  fabiankeil
- *    Change csp->expected_content and_csp->expected_content_length from
- *    size_t to unsigned long long to reduce the likelihood of integer
- *    overflows that would let us close the connection prematurely.
- *    Bug found while investigating #2669131, reported by cyberpatrol.
- *
- *    Revision 1.229  2009/03/07 11:17:01  fabiankeil
- *    Fix compiler warning.
- *
- *    Revision 1.228  2009/03/06 20:30:13  fabiankeil
- *    Log unsigned values as such.
- *
- *    Revision 1.227  2009/03/02 19:18:11  fabiankeil
- *    Streamline parse_http_request()'s prototype. As
- *    cparser pointed out it doesn't actually use csp.
- *
- *    Revision 1.226  2009/03/01 18:28:24  fabiankeil
- *    Help clang understand that we aren't dereferencing
- *    NULL pointers here.
- *
- *    Revision 1.225  2009/02/19 18:09:32  fabiankeil
- *    Unbreak build without FEATURE_CONNECTION_KEEP_ALIVE.
- *    Noticed by David.
- *
- *    Revision 1.224  2009/02/14 15:32:04  fabiankeil
- *    Add the request URL to the timeout message in chat().
- *    Suggested by Lee.
- *
- *    Revision 1.223  2009/02/09 21:21:16  fabiankeil
- *    Now that init_log_module() is called earlier, call show_version()
- *    later on from main() directly so it doesn't get called for --help
- *    or --version.
- *
- *    Revision 1.222  2009/02/08 12:56:51  fabiankeil
- *    Call initialize_mutexes() before init_log_module() again.
- *    Broken since r220, might be the cause of Lee's #2579448.
- *
- *    Revision 1.221  2009/02/06 18:02:58  fabiankeil
- *    When dropping privileges, also give up membership in supplementary
- *    groups. Thanks to Matthias Drochner for reporting the problem,
- *    providing the initial patch and testing the final version.
- *
- *    Revision 1.220  2009/02/04 18:29:07  fabiankeil
- *    Initialize the log module before parsing arguments.
- *    Thanks to Matthias Drochner for the report.
- *
- *    Revision 1.219  2009/01/31 16:08:21  fabiankeil
- *    Remove redundant error check in receive_client_request().
- *
- *    Revision 1.218  2009/01/31 12:25:54  fabiankeil
- *    Flatten indentation in receive_client_request().
- *
- *    Revision 1.217  2009/01/07 19:50:09  fabiankeil
- *    - If the socket-timeout has been reached and the client
- *      hasn't received any data yet, send an explanation before
- *      closing the connection.
- *    - In get_request_line(), signal timeouts the right way.
- *
- *    Revision 1.216  2008/12/24 22:13:11  ler762
- *    fix GCC 3.4.4 warning
- *
- *    Revision 1.215  2008/12/24 17:06:19  fabiankeil
- *    Keep a thread around to timeout alive connections
- *    even if no new requests are coming in.
- *
- *    Revision 1.214  2008/12/20 14:53:55  fabiankeil
- *    Add config option socket-timeout to control the time
- *    Privoxy waits for data to arrive on a socket. Useful
- *    in case of stale ssh tunnels or when fuzz-testing.
- *
- *    Revision 1.213  2008/12/15 18:45:51  fabiankeil
- *    When logging crunches, log the whole URL, so one can easily
- *    differentiate between vanilla HTTP and CONNECT requests.
- *
- *    Revision 1.212  2008/12/14 15:46:22  fabiankeil
- *    Give crunched requests their own log level.
- *
- *    Revision 1.211  2008/12/06 10:05:03  fabiankeil
- *    Downgrade "Received x bytes while expecting y." message to
- *    LOG_LEVEL_CONNECT as it doesn't necessarily indicate an error.
- *
- *    Revision 1.210  2008/12/02 22:03:18  fabiankeil
- *    Don't miscalculate byte_count if we don't get all the
- *    server headers with one read_socket() call. With keep-alive
- *    support enabled, this caused delays until the server closed
- *    the connection.
- *
- *    Revision 1.209  2008/11/27 09:44:04  fabiankeil
- *    Cosmetics for the last commit: Don't watch out for
- *    the last chunk if the content isn't chunk-encoded or
- *    if we already determined the content length previously.
- *
- *    Revision 1.208  2008/11/26 18:24:17  fabiankeil
- *    Recognize that the server response is complete if the
- *    last chunk is read together with the server headers.
- *    Reported by Lee.
- *
- *    Revision 1.207  2008/11/25 17:25:16  fabiankeil
- *    Don't convert the client-header list to text until we need to.
- *
- *    Revision 1.206  2008/11/23 17:00:11  fabiankeil
- *    Some more chat() cosmetics.
- *
- *    Revision 1.205  2008/11/16 12:43:49  fabiankeil
- *    Turn keep-alive support into a runtime feature
- *    that is disabled by setting keep-alive-timeout
- *    to a negative value.
- *
- *    Revision 1.204  2008/11/06 19:42:17  fabiankeil
- *    Fix last-chunk detection hack to also apply
- *    if buf[] contains nothing but the last-chunk.
- *
- *    Revision 1.203  2008/11/06 18:34:35  fabiankeil
- *    Factor receive_client_request() and
- *    parse_client_request() out of chat().
- *
- *    Revision 1.202  2008/11/02 18:40:34  fabiankeil
- *    If we received a different amount of data than we expected,
- *    log a warning and make sure the server socket isn't reused.
- *
- *    Revision 1.201  2008/11/02 16:48:20  fabiankeil
- *    Revert revision 1.195 and try again.
- *
- *    Revision 1.200  2008/10/26 16:53:18  fabiankeil
- *    Fix gcc44 warning.
- *
- *    Revision 1.199  2008/10/26 15:36:10  fabiankeil
- *    Remove two debug messages with LOG_LEVEL_INFO.
- *
- *    Revision 1.198  2008/10/22 15:19:55  fabiankeil
- *    Once More, With Feeling: if there is no logfile
- *    because the user didn't specify one, we shouldn't
- *    call init_error_log() after receiving SIGHUP either.
- *
- *    Revision 1.197  2008/10/20 17:02:40  fabiankeil
- *    If SIGHUP is received while we aren't running in daemon
- *    mode, calling init_error_log() would be a mistake.
- *
- *    Revision 1.196  2008/10/16 09:16:41  fabiankeil
- *    - Fix two gcc44 conversion warnings.
- *    - Don't bother logging the last five bytes
- *      of the 0-chunk.
- *
- *    Revision 1.195  2008/10/13 16:04:37  fabiankeil
- *    Make sure we don't try to reuse tainted server sockets.
- *
- *    Revision 1.194  2008/10/12 18:35:18  fabiankeil
- *    The last commit was a bit too ambitious, apparently the content
- *    length adjustment is only necessary if we aren't buffering.
- *
- *    Revision 1.193  2008/10/12 15:57:35  fabiankeil
- *    Fix content length calculation if we read headers
- *    and the start of the body at once. Now that we have
- *    FEATURE_CONNECTION_KEEP_ALIVE, it actually matters.
- *
- *    Revision 1.192  2008/10/11 18:19:14  fabiankeil
- *    Even more chat() cosmetics.
- *
- *    Revision 1.191  2008/10/11 18:00:14  fabiankeil
- *    Reformat some comments in chat().
- *
- *    Revision 1.190  2008/10/11 14:58:00  fabiankeil
- *    In case of chunk-encoded content, stop reading if
- *    the buffer looks like it ends with the last chunk.
- *
- *    Revision 1.189  2008/10/11 09:53:00  fabiankeil
- *    Let server_response_is_complete() deal properly with
- *    content that is neither buffered nor read all at once.
- *
- *    Revision 1.188  2008/10/09 18:21:41  fabiankeil
- *    Flush work-in-progress changes to keep outgoing connections
- *    alive where possible. Incomplete and mostly #ifdef'd out.
- *
- *    Revision 1.187  2008/09/07 12:35:05  fabiankeil
- *    Add mutex lock support for _WIN32.
- *
- *    Revision 1.186  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.185  2008/08/30 12:03:07  fabiankeil
- *    Remove FEATURE_COOKIE_JAR.
- *
- *    Revision 1.184  2008/08/22 15:34:45  fabiankeil
- *    - Silence LLVM/Clang complaint.
- *    - Make received_hup_signal static.
- *    - Hide definitions for basedir, pidfile and received_hup_signal
- *      from __EMX__ as they only seem to be used in case of #ifdef unix.
- *
- *    Revision 1.183  2008/08/21 07:09:35  fabiankeil
- *    Accept Shoutcast responses again. Problem reported
- *    and fix suggested by Stefan in #2062860.
- *
- *    Revision 1.182  2008/06/27 11:13:56  fabiankeil
- *    Fix possible NULL-pointer dereference reported
- *    by din_a4 in #2003937. Pointy hat to me.
- *
- *    Revision 1.181  2008/05/21 15:47:15  fabiankeil
- *    Streamline sed()'s prototype and declare
- *    the header parse and add structures static.
- *
- *    Revision 1.180  2008/05/21 15:26:32  fabiankeil
- *    - Mark csp as immutable for send_crunch_response().
- *    - Fix comment spelling.
- *
- *    Revision 1.179  2008/05/20 20:13:32  fabiankeil
- *    Factor update_server_headers() out of sed(), ditch the
- *    first_run hack and make server_patterns_light static.
- *
- *    Revision 1.178  2008/05/10 13:23:38  fabiankeil
- *    Don't provide get_header() with the whole client state
- *    structure when it only needs access to csp->iob.
- *
- *    Revision 1.177  2008/05/10 11:51:12  fabiankeil
- *    Make the "read the rest of the headers" loop a bit more readable.
- *
- *    Revision 1.176  2008/05/10 11:37:57  fabiankeil
- *    - Instead of logging when the IIS5 hack is enabled, log when it fails.
- *    - Remove useless comment.
- *
- *    Revision 1.175  2008/05/09 18:53:59  fabiankeil
- *    Fix comment grammar.
- *
- *    Revision 1.174  2008/05/07 18:05:53  fabiankeil
- *    Remove the pointless buffer in client_protocol_is_unsupported().
- *
- *    Revision 1.173  2008/05/06 15:09:00  fabiankeil
- *    Least-effort fix for bug #1821930 (reported by Lee):
- *    If the response doesn't look like HTTP,
- *    tell the client and log the problem.
- *
- *    Revision 1.172  2008/04/16 16:38:21  fabiankeil
- *    Don't pass the whole csp structure to flush_socket()
- *    when it only needs a file descriptor and a buffer.
- *
- *    Revision 1.171  2008/03/27 18:27:25  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.170  2008/03/06 16:33:46  fabiankeil
- *    If limit-connect isn't used, don't limit CONNECT requests to port 443.
- *
- *    Revision 1.169  2008/03/04 18:30:39  fabiankeil
- *    Remove the treat-forbidden-connects-like-blocks action. We now
- *    use the "blocked" page for forbidden CONNECT requests by default.
- *
- *    Revision 1.168  2008/03/02 12:25:25  fabiankeil
- *    Also use shiny new connect_port_is_forbidden() in jcc.c.
- *
- *    Revision 1.167  2008/02/23 16:57:12  fabiankeil
- *    Rename url_actions() to get_url_actions() and let it
- *    use the standard parameter ordering.
- *
- *    Revision 1.166  2008/02/23 16:33:43  fabiankeil
- *    Let forward_url() use the standard parameter ordering
- *    and mark its second parameter immutable.
- *
- *    Revision 1.165  2008/02/02 19:36:56  fabiankeil
- *    Remove the "Listening ... for local connections only" log message.
- *    Whether or not remote connections are able to reach Privoxy is up
- *    to the operating system.
- *
- *    Revision 1.164  2007/12/16 18:32:46  fabiankeil
- *    Prevent the log messages for CONNECT requests to unacceptable
- *    ports from printing the limit-connect argument as [null] if
- *    limit-connect hasn't been explicitly enabled.
- *
- *    Revision 1.163  2007/12/13 01:47:11  david__schmidt
- *    Make sure all console-mode apps get a usage() instance
- *
- *    Revision 1.162  2007/12/06 17:54:57  fabiankeil
- *    Reword NO_SERVER_DATA_RESPONSE to make it harder
- *    to misunderstand what the message is all about.
- *
- *    Revision 1.161  2007/12/04 19:44:22  fabiankeil
- *    Unbreak trustfile which previously didn't work without
- *    FEATURE_TOGGLE. Fixes BR#1843585, reported by Lee.
- *
- *    Revision 1.160  2007/11/29 18:00:29  fabiankeil
- *    Plug memory leak. Spotted by Valgrind, triggered by
- *    Privoxy-Regression-Test feeding proxyfuzz.py.
- *
- *    Revision 1.159  2007/11/24 14:34:09  fabiankeil
- *    In the HTTP snipplets, refer to the client as client.
- *
- *    Revision 1.158  2007/11/11 16:44:17  fabiankeil
- *    Emit a log message when activating the MS IIS5 hack.
- *
- *    Revision 1.157  2007/11/03 17:34:49  fabiankeil
- *    Log the "weak randomization factor" warning only
- *    once for mingw32 and provide some more details.
- *
- *    Revision 1.156  2007/11/01 18:20:58  fabiankeil
- *    Initialize log module after initializing mutexes, future
- *    deadlocks in that code should now work cross-platform.
- *
- *    Revision 1.155  2007/10/23 20:12:45  fabiankeil
- *    Fix first CSUCCEED line to end in \r\n as required by RFC1945.
- *    Reported by Bert van Leeuwen in BR#1818808.
- *
- *    Revision 1.154  2007/10/19 17:00:08  fabiankeil
- *    Downgrade "Flushing header and buffers" message to LOG_LEVEL_INFO.
- *
- *    Revision 1.153  2007/10/14 14:12:41  fabiankeil
- *    When in daemon mode, close stderr after the configuration file has been
- *    parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436.
- *
- *    Revision 1.152  2007/10/04 18:03:34  fabiankeil
- *    - Fix a crash when parsing invalid requests whose first header
- *      is rejected by get_header(). Regression (re?)introduced
- *      in r1.143 by yours truly.
- *    - Move ACTION_VANILLA_WAFER handling into parsers.c's
- *      client_cookie_adder() to make sure send-vanilla-wafer can be
- *      controlled through tags (and thus regression-tested).
- *
- *    Revision 1.151  2007/09/29 10:21:16  fabiankeil
- *    - Move get_filter_function() from jcc.c to filters.c
- *      so the filter functions can be static.
- *    - Don't bother filtering body-less responses.
- *
- *    Revision 1.150  2007/09/28 16:39:29  fabiankeil
- *    Execute content filters through execute_content_filter().
- *
- *    Revision 1.149  2007/09/04 15:08:48  fabiankeil
- *    Initialize req to NULL to make sure it's defined if the
- *    first read_socket() call fails. Reported by icmp30.
- *
- *    Revision 1.148  2007/08/26 16:47:13  fabiankeil
- *    Add Stephen Gildea's --pre-chroot-nslookup patch [#1276666],
- *    extensive comments moved to user manual.
- *
- *    Revision 1.147  2007/08/25 14:42:40  fabiankeil
- *    Don't crash if a broken header filter wiped out the request line.
- *
- *    Revision 1.146  2007/08/20 17:09:32  fabiankeil
- *    Fix byte_count calculation in case of flushes
- *    and don't parse the server headers a second time.
- *
- *    Revision 1.145  2007/08/19 13:13:31  fabiankeil
- *    - If there's a connection problem after we already forwarded
- *      parts of the original content, just hang up. Fixes BR#1776724.
- *    - Fix warnings about unused code on mingw32.
- *    - In case of flushes, calculate the byte count
- *      less incorrectly (I think).
- *
- *    Revision 1.144  2007/08/11 14:43:22  fabiankeil
- *    Add some more prototypes for static functions.
- *
- *    Revision 1.143  2007/08/05 13:58:19  fabiankeil
- *    Comment out request_contains_null_bytes() until it's used again.
- *
- *    Revision 1.142  2007/08/05 13:50:26  fabiankeil
- *    #1763173 from Stefan Huehner: s@const static@static const@
- *    and declare some more functions static.
- *
- *    Revision 1.141  2007/08/04 09:56:23  fabiankeil
- *    - Log rejected CONNECT requests with LOG_LEVEL_INFO
- *      and explain why they were rejected in the first place.
- *    - Fix the LOG_LEVEL_CLF message for crunches of unallowed
- *      CONNECT requests. The request line was missing.
- *    - Add two more XXX reminders as we don't have enough already.
- *
- *    Revision 1.140  2007/07/21 11:51:36  fabiankeil
- *    As Hal noticed, checking dispatch_cgi() as the last cruncher
- *    looks like a bug if CGI requests are blocked unintentionally,
- *    so don't do it unless the user enabled the new config option
- *    "allow-cgi-request-crunching".
- *
- *    Revision 1.139  2007/07/14 07:46:41  fabiankeil
- *    - Allow to rewrite the request destination behind the client's back.
- *    - Turn the weird-looking unconditional for loop that
- *      reads the client request into a conditional while loop.
- *      Move the stuff that only runs once out of the loop.
- *    - Move parts of chat(), server_content_type() and the
- *      necessary stuff to fix BR#1750917 into get_filter_function().
- *
- *    Revision 1.138  2007/06/03 18:45:18  fabiankeil
- *    Temporary workaround for BR#1730105.
- *
- *    Revision 1.137  2007/06/01 18:16:36  fabiankeil
- *    Use the same mutex for gethostbyname() and gethostbyaddr() to prevent
- *    deadlocks and crashes on OpenBSD and possibly other OS with neither
- *    gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174.
- *    Thanks to Ralf Horstmann for report and solution.
- *
- *    Revision 1.136  2007/06/01 16:41:11  fabiankeil
- *    Add forward-override{} to change the forwarding settings through
- *    action sections. This is mainly interesting to forward different
- *    clients differently (for example based on User-Agent or request
- *    origin).
- *
- *    Revision 1.135  2007/05/24 17:03:50  fabiankeil
- *    - Let usage() mention the --chroot parameter.
- *    - Use read_socket() consistently and always leave
- *      the last buffer byte alone, even in cases where
- *      null termination (currently) doesn't matter.
- *
- *    Revision 1.134  2007/05/16 14:59:46  fabiankeil
- *    - Fix config file loading on Unix if no config file is specified.
- *      Since r1.97 Privoxy would always interpret the last argument as
- *      config file, even if it's a valid command line option.
- *    - Abort in case of unrecognized command line options. Closes #1719696.
- *    - Remove a bunch of unnecessary strcpy() calls (yay for c&p without thinking).
- *    - Replace the remaining strcpy() and strcat() calls with strlcpy() and strcat().
- *
- *    Revision 1.133  2007/05/04 11:23:19  fabiankeil
- *    - Don't rerun crunchers that only depend on the request URL.
- *    - Don't count redirects and CGI requests as "blocked requests".
- *
- *    Revision 1.132  2007/04/25 15:15:17  fabiankeil
- *    Support crunching based on tags created by server-header taggers.
- *
- *    Revision 1.131  2007/04/22 13:24:50  fabiankeil
- *    Make HTTP snippets static (again). Add a Content-Type for those
- *    with content so the browser doesn't guess it based on the URL.
- *
- *    Revision 1.130  2007/04/19 13:47:34  fabiankeil
- *    Move crunching and request line rebuilding out of chat().
- *
- *    Revision 1.129  2007/04/15 16:39:20  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.128  2007/03/25 16:55:54  fabiankeil
- *    Don't CLF-log CONNECT requests twice.
- *
- *    Revision 1.127  2007/03/20 13:53:17  fabiankeil
- *    Log the source address for ACL-related connection drops.
- *
- *    Revision 1.126  2007/03/17 15:20:05  fabiankeil
- *    New config option: enforce-blocks.
- *
- *    Revision 1.125  2007/03/09 14:12:00  fabiankeil
- *    - Move null byte check into separate function.
- *    - Don't confuse the client with error pages
- *      if a CONNECT request was already confirmed.
- *
- *    Revision 1.124  2007/02/23 14:59:54  fabiankeil
- *    Speed up NULL byte escaping and only log the complete
- *    NULL byte requests with header debugging enabled.
- *
- *    Revision 1.123  2007/02/21 18:42:10  fabiankeil
- *    Answer requests that contain NULL bytes with
- *    a custom response instead of waiting for more
- *    data until the client eventually hangs up.
- *
- *    Revision 1.122  2007/02/07 11:12:02  fabiankeil
- *    - Move delivery and logging of crunched responses
- *      from chat() into send_crunch_response().
- *    - Display the reason for generating http_responses.
- *    - Log the content length for LOG_LEVEL_CLF correctly
- *      (still incorrect for some fixed responses).
- *    - Reword an incorrect comment about
- *      treat-forbidden-connects-like-blocks violating
- *      the specs.
- *    - Add some log messages.
- *
- *    Revision 1.121  2007/01/27 10:52:56  fabiankeil
- *    Move mutex initialization into separate
- *    function and exit in case of errors.
- *
- *    Revision 1.120  2007/01/26 14:18:42  fabiankeil
- *    - Start to reduce chat()'s line count and move
- *      parts of it into separate functions.
- *    - Add "HTTP/1.1 100 Continue" hack for BR 756734.
- *
- *    Revision 1.119  2007/01/25 14:02:30  fabiankeil
- *    - Add Proxy-Agent header to HTTP snippets that are
- *      supposed to reach HTTP clients only.
- *    - Made a few CONNECT log messages more descriptive.
- *    - Catch completely empty server responses (as seen
- *      with Tor's fake ".noconnect" top level domain).
- *    - Use shiny new "forwarding-failed" template for socks errors.
- *
- *    Revision 1.118  2007/01/07 07:43:43  joergs
- *    AmigaOS4 support added.
- *
- *    Revision 1.117  2006/12/31 17:56:37  fabiankeil
- *    Added config option accept-intercepted-requests
- *    and disabled it by default.
- *
- *    Revision 1.116  2006/12/29 19:08:22  fabiankeil
- *    Reverted parts of my last commit
- *    to keep error handling working.
- *
- *    Revision 1.115  2006/12/29 17:38:57  fabiankeil
- *    Fixed gcc43 conversion warnings.
- *
- *    Revision 1.114  2006/12/27 18:52:02  fabiankeil
- *    Fix -pedantic ISO C warning about converting
- *    from function pointer to object pointer.
- *
- *    Revision 1.113  2006/12/26 17:38:50  fabiankeil
- *    Silence compiler warning I introduced with my last commit.
- *
- *    Revision 1.112  2006/12/26 17:31:41  fabiankeil
- *    Mutex protect rand() if POSIX threading
- *    is used, warn the user if that's not possible
- *    and stop using it on _WIN32 where it could
- *    cause crashes.
- *
- *    Revision 1.111  2006/12/23 16:15:06  fabiankeil
- *    Don't prevent core dumps by catching SIGABRT.
- *    It's rude and makes debugging unreasonable painful.
- *
- *    Revision 1.110  2006/12/13 14:52:53  etresoft
- *    Fix build failure on MacOS X. Global symbols can be either static or extern, but not both.
- *
- *    Revision 1.109  2006/12/06 19:41:40  fabiankeil
- *    Privoxy is now able to run as intercepting
- *    proxy in combination with any packet filter
- *    that does the port redirection. The destination
- *    is extracted from the "Host:" header which
- *    should be available for nearly all requests.
- *
- *    Moved HTTP snipplets into jcc.c.
- *    Added error message for gopher proxy requests.
- *
- *    Revision 1.108  2006/11/28 15:38:51  fabiankeil
- *    Only unlink the pidfile if it's actually used.
- *
- *    Change order of interception checks to make
- *    it possible to block or redirect requests for
- *    the cgi pages.
- *
- *    Revision 1.107  2006/11/13 19:05:51  fabiankeil
- *    Make pthread mutex locking more generic. Instead of
- *    checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- *    and use mutex locking unless there is an _r function
- *    available. Better safe than sorry.
- *
- *    Fixes "./configure --disable-pthread" and should result
- *    in less threading-related problems on pthread-using platforms,
- *    but it still doesn't fix BR#1122404.
- *
- *    Revision 1.106  2006/11/06 19:58:23  fabiankeil
- *    Move pthread.h inclusion from jcc.c to jcc.h.
- *    Fixes build on x86-freebsd1 (FreeBSD 5.4-RELEASE).
- *
- *    Revision 1.105  2006/11/06 14:26:02  fabiankeil
- *    Don't exit after receiving the second SIGHUP on Solaris.
- *
- *    Fixes BR 1052235, but the same problem may exist on other
- *    systems. Once 3.0.6 is out we should use sigset()
- *    where available and see if it breaks anything.
- *
- *    Revision 1.104  2006/09/23 13:26:38  roro
- *    Replace TABs by spaces in source code.
- *
- *    Revision 1.103  2006/09/21 12:54:43  fabiankeil
- *    Fix +redirect{}. Didn't work with -fast-redirects.
- *
- *    Revision 1.102  2006/09/06 13:03:04  fabiankeil
- *    Respond with 400 and a short text message
- *    if the client tries to use Privoxy as FTP proxy.
- *
- *    Revision 1.101  2006/09/06 09:23:37  fabiankeil
- *    Make number of retries in case of forwarded-connect problems
- *    a config file option (forwarded-connect-retries) and use 0 as
- *    default.
- *
- *    Revision 1.100  2006/09/03 19:42:59  fabiankeil
- *    Set random(3) seed.
- *
- *    Revision 1.99  2006/09/02 15:36:42  fabiankeil
- *    Follow the OpenBSD port's lead and protect the resolve
- *    functions on OpenBSD as well.
- *
- *    Revision 1.98  2006/08/24 11:01:34  fabiankeil
- *    --user fix. Only use the user as group if no group is specified.
- *    Solves BR 1492612. Thanks to Spinor S. and David Laight.
- *
- *    Revision 1.97  2006/08/18 15:23:17  david__schmidt
- *    Windows service (re-)integration
- *
- *    The new args are:
- *
- *    --install[:service_name]
- *    --uninstall[:service_name]
- *    --service
- *
- *    They work as follows:
- *    --install will create a service for you and then terminate.
- *    By default the service name will be "privoxy" (without the quotes).
- *    However you can run multiple services if you wish, just by adding
- *    a colon and then a name (no spaces).
- *
- *    --uninstall follows the exact same rules a --install.
- *
- *    --service is used when the program is executed by the service
- *    control manager, and in normal circumstances would never be
- *    used as a command line argument.
- *
- *    Revision 1.96  2006/08/15 20:12:36  david__schmidt
- *    Windows service integration
- *
- *    Revision 1.95  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:
-http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.94  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.92.2.16  2005/04/03 20:10:50  david__schmidt
- *    Thanks to Jindrich Makovicka for a race condition fix for the log
- *    file.  The race condition remains for non-pthread implementations.
- *    Reference patch #1175720.
- *
- *    Revision 1.92.2.15  2004/10/03 12:53:32  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.92.2.14  2003/12/12 12:52:53  oes
- *    - Fixed usage info for non-unix platforms
- *    - Fixed small cmdline parsing bug
- *
- *    Revision 1.92.2.13  2003/11/27 19:20:27  oes
- *    Diagnostics: Now preserve the returncode of pthread_create
- *    in errno. Closes BR #775721. Thanks to Geoffrey Hausheer.
- *
- *    Revision 1.92.2.12  2003/07/11 11:34:19  oes
- *    No longer ignore SIGCHLD. Fixes bug #769381
- *
- *    Revision 1.92.2.11  2003/05/14 12:32:02  oes
- *    Close jarfile on graceful exit, remove stray line
- *
- *    Revision 1.92.2.10  2003/05/08 15:13:46  oes
- *    Cosmetics: Killed a warning, a typo and an allocation left at exit
- *
- *    Revision 1.92.2.9  2003/04/03 15:08:42  oes
- *    No longer rely on non-POSIX.1 extensions of getcwd().
- *    Fixes bug #711001
- *
- *    Revision 1.92.2.8  2003/03/31 13:12:32  oes
- *    Replaced setenv() by posix-compliant putenv()
- *    Thanks to Neil McCalden (nmcc AT users.sf.net).
- *
- *    Revision 1.92.2.7  2003/03/17 16:48:59  oes
- *    Added chroot ability, thanks to patch by Sviatoslav Sviridov
- *
- *    Revision 1.92.2.6  2003/03/11 11:55:00  oes
- *    Clean-up and extension of improvements for forked mode:
- *     - Child's return code now consists of flags RC_FLAG_*
- *     - Reporting toggle to parent now properly #ifdef'ed
- *     - Children now report blocking to parent. This enables
- *       statistics in forked mode
- *
- *    Revision 1.92.2.5  2003/03/10 23:45:32  oes
- *    Fixed bug #700381: Non-Threaded version now capable of being toggled.
- *    Children now report having been toggled through _exit(17), parents
- *    watch for that code and toggle themselves if found.
- *
- *    Revision 1.92.2.4  2003/03/07 03:41:04  david__schmidt
- *    Wrapping all *_r functions (the non-_r versions of them) with 
- *    mutex semaphores for OSX.  Hopefully this will take care of all 
- *    of those pesky crash reports.
- *
- *    Revision 1.92.2.3  2003/02/28 12:53:06  oes
- *    Fixed two mostly harmless mem leaks
- *
- *    Revision 1.92.2.2  2002/11/20 14:37:47  oes
- *    Fix: Head of global clients list now initialized to NULL
- *
- *    Revision 1.92.2.1  2002/09/25 14:52:24  oes
- *    Added basic support for OPTIONS and TRACE HTTP methods:
- *     - New interceptor direct_response() added in chat().
- *     - sed() moved to earlier in the process, so that the
- *       Host: header is evaluated before actions and forwarding
- *       are decided on.
- *
- *    Revision 1.92  2002/05/08 16:00:46  oes
- *    Chat's buffer handling:
- *     - Fixed bug with unchecked out-of-mem conditions
- *       while reading client request & server headers
- *     - No longer predict if the buffer limit will be exceeded
- *       in the next read -- check add_to_iob's new
- *       return code. If buffer couldn't be extended
- *       (policy or out-of-mem) while
- *       - reading from client: abort
- *       - reading server headers: send error page
- *       - buffering server body for filter: flush,
- *         and if that fails: send error page
- *
- *    Revision 1.91  2002/04/08 20:35:58  swa
- *    fixed JB spelling
- *
- *    Revision 1.90  2002/04/02 14:57:28  oes
- *    Made sending wafers independent of FEATURE_COOKIE_JAR
- *
- *    Revision 1.89  2002/03/31 17:18:59  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.88  2002/03/27 14:32:43  david__schmidt
- *    More compiler warning message maintenance
- *
- *    Revision 1.87  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.86  2002/03/25 17:04:55  david__schmidt
- *    Workaround for closing the jarfile before load_config() comes around again
- *
- *    Revision 1.85  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.84  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.83  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.82  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.81  2002/03/12 01:42:50  oes
- *    Introduced modular filters
- *
- *    Revision 1.80  2002/03/11 22:07:05  david__schmidt
- *    OS/2 port maintenance:
- *    - Fixed EMX build - it had decayed a little
- *    - Fixed inexplicable crash during FD_ZERO - must be due to a bad macro.
- *      substituted a memset for now.
- *
- *    Revision 1.79  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.78  2002/03/08 21:35:04  oes
- *    Added optional group supplement to --user option. Will now use default group of user if no group given
- *
- *    Revision 1.77  2002/03/07 03:52:06  oes
- *     - Fixed compiler warnings etc
- *     - Improved handling of failed DNS lookups
- *
- *    Revision 1.76  2002/03/06 22:54:35  jongfoster
- *    Automated function-comment nitpicking.
- *
- *    Revision 1.75  2002/03/06 10:02:19  oes
- *    Fixed stupid bug when --user was not given
- *
- *    Revision 1.74  2002/03/06 00:49:31  jongfoster
- *    Fixing warning on Windows
- *    Making #ifdefs that refer to the same variable consistently
- *    use #ifdef unix rather than mixing #ifdef unix & #ifndef OS2
- *
- *    Revision 1.73  2002/03/05 23:57:30  hal9
- *    Stray character 's' on line 1618 was breaking build.
- *
- *    Revision 1.72  2002/03/05 21:33:45  david__schmidt
- *    - Re-enable OS/2 building after new parms were added
- *    - Fix false out of memory report when resolving CGI templates when no IP
- *      address is available of failed attempt (a la no such domain)
- *
- *    Revision 1.71  2002/03/05 18:13:56  oes
- *    Added --user option
- *
- *    Revision 1.70  2002/03/05 04:52:42  oes
- *    Deleted non-errlog debugging code
- *
- *    Revision 1.69  2002/03/04 23:50:00  jongfoster
- *    Splitting off bind_port() call into bind_port_helper(), with
- *    improved logging.
- *
- *    Revision 1.68  2002/03/04 20:17:32  oes
- *    Fixed usage info
- *
- *    Revision 1.67  2002/03/04 18:18:57  oes
- *    - Removed _DEBUG mode
- *    - Cleand up cmdline parsing
- *    - Introduced --no-daemon, --pidfile options
- *    - Cleaned up signal handling:
- *      - Terminate cleanly on INT, TERM and ABRT
- *      - Schedule logfile for re-opening on HUP
- *      - Ignore CHLD and PIPE
- *      - Leave the rest with their default handlers
- *      - Uniform handler registration
- *    - Added usage() function
- *    - Played styleguide police
- *
- *    Revision 1.66  2002/03/03 15:06:55  oes
- *    Re-enabled automatic config reloading
- *
- *    Revision 1.65  2002/03/03 14:49:11  oes
- *    Fixed CLF logging: Now uses client's original HTTP request
- *
- *    Revision 1.64  2002/03/03 09:18:03  joergs
- *    Made jumbjuster work on AmigaOS again.
- *
- *    Revision 1.63  2002/03/02 04:14:50  david__schmidt
- *    Clean up a little CRLF unpleasantness that suddenly appeared
- *
- *    Revision 1.62  2002/02/20 23:17:23  jongfoster
- *    Detecting some out-of memory conditions and exiting with a log message.
- *
- *    Revision 1.61  2002/01/17 21:01:52  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Revision 1.60  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.59  2001/12/13 14:07:18  oes
- *    Fixed Bug: 503 error page now sent OK
- *
- *    Revision 1.58  2001/11/30 23:37:24  jongfoster
- *    Renaming the Win32 config file to config.txt - this is almost the
- *    same as the corresponding UNIX name "config"
- *
- *    Revision 1.57  2001/11/16 00:47:43  jongfoster
- *    Changing the tty-disconnection code to use setsid().
- *
- *    Revision 1.56  2001/11/13 20:20:54  jongfoster
- *    Tabs->spaces, fixing a bug with missing {} around an if()
- *
- *    Revision 1.55  2001/11/13 20:14:53  jongfoster
- *    Patch for FreeBSD setpgrp() as suggested by Alexander Lazic
- *
- *    Revision 1.54  2001/11/07 00:03:14  steudten
- *    Give reliable return value if an error
- *    occurs not just 0 with new daemon mode.
- *
- *    Revision 1.53  2001/11/05 21:41:43  steudten
- *    Add changes to be a real daemon just for unix os.
- *    (change cwd to /, detach from controlling tty, set
- *    process group and session leader to the own process.
- *    Add DBG() Macro.
- *    Add some fatal-error log message for failed malloc().
- *    Add '-d' if compiled with 'configure --with-debug' to
- *    enable debug output.
- *
- *    Revision 1.52  2001/10/26 20:11:20  jongfoster
- *    Fixing type mismatch
- *
- *    Revision 1.51  2001/10/26 17:38:28  oes
- *    Cosmetics
- *
- *    Revision 1.50  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.49  2001/10/23 21:41:35  jongfoster
- *    Added call to initialize the (statically-allocated of course)
- *    "out of memory" CGI response.
- *
- *    Revision 1.48  2001/10/10 19:56:46  jongfoster
- *    Moving some code that wasn't cookie-related out of an #ifdef
- *    FEATURE_COOKIE_JAR
- *
- *    Revision 1.47  2001/10/10 16:44:36  oes
- *    Added CONNECT destination port limitation check
- *
- *    Revision 1.46  2001/10/08 15:17:41  oes
- *    Re-enabled SSL forwarding
- *
- *    Revision 1.45  2001/10/07 15:42:11  oes
- *    Replaced 6 boolean members of csp with one bitmap (csp->flags)
- *
- *    Moved downgrading of the HTTP version from parse_http_request to
- *      chat(), since we can't decide if it is necessary before we have
- *      determined the actions for the URL. The HTTP command is now
- *      *always* re-built so the repairs need no longer be special-cased.
- *
- *    filter_popups now gets a csp pointer so it can raise the new
- *      CSP_FLAG_MODIFIED flag.
- *
- *    Bugfix
- *
- *    Added configurable size limit for the IOB. If the IOB grows so
- *      large that the next read would exceed the limit, the header
- *      is generated, and the header & unfiltered buffer are flushed
- *      to the client. Chat then continues in non-buffering,
- *      non-filtering body mode.
- *
- *    Revision 1.44  2001/10/02 18:13:57  oes
- *    Ooops
- *
- *    Revision 1.43  2001/10/02 15:32:13  oes
- *    Moved generation of hdr
- *
- *    Revision 1.42  2001/09/21 23:02:02  david__schmidt
- *    Cleaning up 2 compiler warnings on OS/2.
- *
- *    Revision 1.41  2001/09/16 17:05:14  jongfoster
- *    Removing unused #include showarg.h
- *
- *    Revision 1.40  2001/09/16 15:41:45  jongfoster
- *    Fixing signed/unsigned comparison warning.
- *
- *    Revision 1.39  2001/09/16 13:21:27  jongfoster
- *    Changes to use new list functions.
- *
- *    Revision 1.38  2001/09/16 13:01:46  jongfoster
- *    Removing redundant function call that zeroed zalloc()'d memory.
- *
- *    Revision 1.37  2001/09/10 11:12:24  oes
- *    Deleted unused variable
- *
- *    Revision 1.36  2001/09/10 10:56:15  oes
- *    Silenced compiler warnings
- *
- *    Revision 1.35  2001/07/31 14:44:22  oes
- *    Deleted unused size parameter from filter_popups()
- *
- *    Revision 1.34  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.33  2001/07/29 19:32:00  jongfoster
- *    Renaming _main() [mingw32 only] to real_main(), for ANSI compliance.
- *
- *    Revision 1.32  2001/07/29 18:47:05  jongfoster
- *    Adding missing #include "loadcfg.h"
- *
- *    Revision 1.31  2001/07/29 12:17:48  oes
- *    Applied pthread fix by Paul Lieverse
- *
- *    Revision 1.30  2001/07/25 22:57:13  jongfoster
- *    __BEOS__ no longer overrides FEATURE_PTHREAD.
- *    This is because FEATURE_PTHREAD will soon be widely used, so I
- *    want to keep it simple.
- *
- *    Revision 1.29  2001/07/24 12:47:06  oes
- *    Applied BeOS support update by Eugenia
- *
- *    Revision 1.28  2001/07/23 13:26:12  oes
- *    Fixed bug in popup-killing for the first read that caused binary garbage to be sent between headers and body
- *
- *    Revision 1.27  2001/07/19 19:09:47  haroon
- *    - Added code to take care of the situation where while processing the first
- *      server response (which includes the server header), after finding the end
- *      of the headers we were not looking past the end of the headers for
- *      content modification. I enabled it for filter_popups.
- *      Someone else should look to see if other similar operations should be
- *      done to the discarded portion of the buffer.
- *
- *      Note 2001/07/20: No, the other content modification mechanisms will process
- *                       the whole iob later anyway. --oes
- *
- *    Revision 1.26  2001/07/18 12:31:36  oes
- *    cosmetics
- *
- *    Revision 1.25  2001/07/15 19:43:49  jongfoster
- *    Supports POSIX threads.
- *    Also removed some unused #includes.
- *
- *    Revision 1.24  2001/07/13 14:00:40  oes
- *     - Generic content modification scheme:
- *       Each feature has its own applicability flag that is set
- *       from csp->action->flags.
- *       Replaced the "filtering" int flag , by a function pointer
- *       "content_filter" to the function that will do the content
- *       modification. If it is != NULL, the document will be buffered
- *       and processed through *content_filter, which must set
- *       csp->content_length and return a modified copy of the body
- *       or return NULL (on failiure).
- *     - Changed csp->is_text to the more generic bitmap csp->content_type
- *       which can currently take the valued CT_TEXT or CT_GIF
- *     - Reformatting etc
- *     - Removed all #ifdef PCRS
- *
- *    Revision 1.23  2001/07/02 02:28:25  iwanttokeepanon
- *    Added "#ifdef ACL_FILES" conditional compilation to line 1291 to exclude
- *    the `block_acl' call.  This prevents a compilation error when the user
- *    does not wish to use the "ACL" feature.
- *
- *    Revision 1.22  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.21  2001/06/29 13:29:36  oes
- *    - Cleaned up, improved comments
- *    - Unified all possible interceptors (CGI,
- *      block, trust, fast_redirect) in one
- *      place, with one (CGI) answer generation
- *      mechansim. Much clearer now.
- *    - Removed the GIF image generation, which
- *      is now done in filters.c:block_url()
- *    - Made error conditions like domain lookup
- *      failiure or (various) problems while talking
- *      to the server use cgi.c:error_response()
- *      instead of generating HTML/HTTP in chat() (yuck!)
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.20  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.19  2001/06/07 23:12:52  jongfoster
- *    Replacing function pointer in struct gateway with a directly
- *    called function forwarded_connect().
- *    Replacing struct gateway with struct forward_spec
- *
- *    Revision 1.18  2001/06/03 19:12:16  oes
- *    introduced new cgi handling
- *
- *    Revision 1.17  2001/06/01 20:07:23  jongfoster
- *    Now uses action +image-blocker{} rather than config->tinygif
- *
- *    Revision 1.16  2001/06/01 18:49:17  jongfoster
- *    Replaced "list_share" with "list" - the tiny memory gain was not
- *    worth the extra complexity.
- *
- *    Revision 1.15  2001/05/31 21:24:47  jongfoster
- *    Changed "permission" to "action" throughout.
- *    Removed DEFAULT_USER_AGENT - it must now be specified manually.
- *    Moved vanilla wafer check into chat(), since we must now
- *    decide whether or not to add it based on the URL.
- *
- *    Revision 1.14  2001/05/29 20:14:01  joergs
- *    AmigaOS bugfix: PCRS needs a lot of stack, stacksize for child threads
- *    increased.
- *
- *    Revision 1.13  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.12  2001/05/27 22:17:04  oes
- *
- *    - re_process_buffer no longer writes the modified buffer
- *      to the client, which was very ugly. It now returns the
- *      buffer, which it is then written by chat.
- *
- *    - content_length now adjusts the Content-Length: header
- *      for modified documents rather than crunch()ing it.
- *      (Length info in csp->content_length, which is 0 for
- *      unmodified documents)
- *
- *    - For this to work, sed() is called twice when filtering.
- *
- *    Revision 1.11  2001/05/26 17:27:53  jongfoster
- *    Added support for CLF and fixed LOG_LEVEL_LOG.
- *    Also did CRLF->LF fix of my previous patch.
- *
- *    Revision 1.10  2001/05/26 15:26:15  jongfoster
- *    ACL feature now provides more security by immediately dropping
- *    connections from untrusted hosts.
- *
- *    Revision 1.9  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.8  2001/05/25 22:43:18  jongfoster
- *    Fixing minor memory leak and buffer overflow.
- *
- *    Revision 1.7  2001/05/25 22:34:30  jongfoster
- *    Hard tabs->Spaces
- *
- *    Revision 1.6  2001/05/23 00:13:58  joergs
- *    AmigaOS support fixed.
- *
- *    Revision 1.5  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.4  2001/05/21 19:34:01  jongfoster
- *    Made failure to bind() a fatal error.
- *
- *    Revision 1.3  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.2  2001/05/17 22:34:44  oes
- *     - Added hint on GIF char array generation to jcc.c
- *     - Cleaned CRLF's from the sources and related files
- *     - Repaired logging for REF and FRC
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:56  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <assert.h>
-
-#ifdef _WIN32
-# ifndef FEATURE_PTHREAD
-#  ifndef STRICT
-#   define STRICT
-#  endif
-#  include <windows.h>
-#  include <process.h>
-# endif /* ndef FEATURE_PTHREAD */
-
-# include "win32.h"
-# ifndef _WIN_CONSOLE
-#  include "w32log.h"
-# endif /* ndef _WIN_CONSOLE */
-# include "w32svrapi.h"
-
-#else /* ifndef _WIN32 */
-
-# if !defined (__OS2__)
-# include <unistd.h>
-# include <sys/wait.h>
-# endif /* ndef __OS2__ */
-# include <sys/time.h>
-# include <sys/stat.h>
-# include <sys/ioctl.h>
-
-#ifdef sun
-#include <sys/termios.h>
-#endif /* sun */
-
-#ifdef unix
-#include <pwd.h>
-#include <grp.h>
-#endif
-
-# include <signal.h>
-
-# ifdef __BEOS__
-#  include <socket.h>  /* BeOS has select() for sockets only. */
-#  include <OS.h>      /* declarations for threads and stuff. */
-# endif
-
-# if defined(__EMX__) || defined(__OS2__)
-#  include <sys/select.h>  /* OS/2/EMX needs a little help with select */
-# endif
-# ifdef __OS2__
-#define INCL_DOS
-# include <os2.h>
-#define bzero(B,N) memset(B,0x00,n)
-# endif
-
-# ifndef FD_ZERO
-#  include <select.h>
-# endif
-
-#endif
-
-#include "project.h"
-#include "list.h"
-#include "jcc.h"
-#include "filters.h"
-#include "loaders.h"
-#include "parsers.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "jbsockets.h"
-#include "gateway.h"
-#include "actions.h"
-#include "cgi.h"
-#include "loadcfg.h"
-#include "urlmatch.h"
-
-const char jcc_h_rcs[] = JCC_H_VERSION;
-const char project_h_rcs[] = PROJECT_H_VERSION;
-
-int no_daemon = 0;
-struct client_state  clients[1];
-struct file_list     files[1];
-
-#ifdef FEATURE_STATISTICS
-int urls_read     = 0;     /* total nr of urls read inc rejected */
-int urls_rejected = 0;     /* total nr of urls rejected */
-#endif /* def FEATURE_STATISTICS */
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-int g_terminate = 0;
-#endif
-
-#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA)
-static void sig_handler(int the_signal);
-#endif
-static int client_protocol_is_unsupported(const struct client_state *csp, char *req);
-static jb_err get_request_destination_elsewhere(struct client_state *csp, struct list *headers);
-static jb_err get_server_headers(struct client_state *csp);
-static const char *crunch_reason(const struct http_response *rsp);
-static void send_crunch_response(const struct client_state *csp, struct http_response *rsp);
-static char *get_request_line(struct client_state *csp);
-static jb_err receive_client_request(struct client_state *csp);
-static jb_err parse_client_request(struct client_state *csp);
-static void build_request_line(struct client_state *csp, const struct forward_spec *fwd, char **request_line);
-static jb_err change_request_destination(struct client_state *csp);
-static void chat(struct client_state *csp);
-static void serve(struct client_state *csp);
-#if !defined(_WIN32) || defined(_WIN_CONSOLE)
-static void usage(const char *myname);
-#endif
-static void initialize_mutexes(void);
-static jb_socket bind_port_helper(struct configuration_spec *config);
-static void listen_loop(void);
-
-#ifdef AMIGA
-void serve(struct client_state *csp);
-#else /* ifndef AMIGA */
-static void serve(struct client_state *csp);
-#endif /* def AMIGA */
-
-#ifdef __BEOS__
-static int32 server_thread(void *data);
-#endif /* def __BEOS__ */
-
-#ifdef _WIN32
-#define sleep(N)  Sleep(((N) * 1000))
-#endif
-
-#ifdef __OS2__
-#define sleep(N)  DosSleep(((N) * 100))
-#endif
-
-#ifdef MUTEX_LOCKS_AVAILABLE
-/*
- * XXX: Does the locking stuff really belong in this file?
- */
-privoxy_mutex_t log_mutex;
-privoxy_mutex_t log_init_mutex;
-privoxy_mutex_t connection_reuse_mutex;
-
-#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R)
-privoxy_mutex_t resolver_mutex;
-#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */
-
-#ifndef HAVE_GMTIME_R
-privoxy_mutex_t gmtime_mutex;
-#endif /* ndef HAVE_GMTIME_R */
-
-#ifndef HAVE_LOCALTIME_R
-privoxy_mutex_t localtime_mutex;
-#endif /* ndef HAVE_GMTIME_R */
-
-#ifndef HAVE_RANDOM
-privoxy_mutex_t rand_mutex;
-#endif /* ndef HAVE_RANDOM */
-
-#endif /* def MUTEX_LOCKS_AVAILABLE */
-
-#if defined(unix)
-const char *basedir = NULL;
-const char *pidfile = NULL;
-static int received_hup_signal = 0;
-#endif /* defined unix */
-
-/* HTTP snipplets. */
-static const char CSUCCEED[] =
-   "HTTP/1.0 200 Connection established\r\n"
-   "Proxy-Agent: Privoxy/" VERSION "\r\n\r\n";
-
-static const char CHEADER[] =
-   "HTTP/1.0 400 Invalid header received from client\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Invalid header received from client.\r\n";
-
-static const char FTP_RESPONSE[] =
-   "HTTP/1.0 400 Invalid request received from client\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Invalid request. Privoxy doesn't support FTP.\r\n";
-
-static const char GOPHER_RESPONSE[] =
-   "HTTP/1.0 400 Invalid request received from client\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Invalid request. Privoxy doesn't support gopher.\r\n";
-
-/* XXX: should be a template */
-static const char MISSING_DESTINATION_RESPONSE[] =
-   "HTTP/1.0 400 Bad request received from client\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Bad request. Privoxy was unable to extract the destination.\r\n";
-
-/* XXX: should be a template */
-static const char NO_SERVER_DATA_RESPONSE[] =
-   "HTTP/1.0 502 Server or forwarder response empty\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Empty server or forwarder response.\r\n"
-   "The connection has been closed but Privoxy didn't receive any data.\r\n";
-
-/* XXX: should be a template */
-static const char INVALID_SERVER_HEADERS_RESPONSE[] =
-   "HTTP/1.0 502 Server or forwarder response invalid\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Bad response. The server or forwarder response doesn't look like HTTP.\r\n";
-
-#if 0
-/* XXX: should be a template */
-static const char NULL_BYTE_RESPONSE[] =
-   "HTTP/1.0 400 Bad request received from client\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Bad request. Null byte(s) before end of request.\r\n";
-#endif
-
-/* XXX: should be a template */
-static const char MESSED_UP_REQUEST_RESPONSE[] =
-   "HTTP/1.0 400 Malformed request after rewriting\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "Bad request. Messed up with header filters.\r\n";
-
-/* XXX: should be a template */
-static const char CONNECTION_TIMEOUT_RESPONSE[] =
-   "HTTP/1.0 502 Connection timeout\r\n"
-   "Proxy-Agent: Privoxy " VERSION "\r\n"
-   "Content-Type: text/plain\r\n"
-   "Connection: close\r\n\r\n"
-   "The connection timed out.\r\n";
-
-/* A function to crunch a response */
-typedef struct http_response *(*crunch_func_ptr)(struct client_state *);
-
-/* Crunch function flags */
-#define CF_NO_FLAGS        0
-/* Cruncher applies to forced requests as well */
-#define CF_IGNORE_FORCE    1
-/* Crunched requests are counted for the block statistics */
-#define CF_COUNT_AS_REJECT 2
-
-/* A crunch function and its flags */
-struct cruncher
-{
-   const crunch_func_ptr cruncher;
-   const int flags;
-};
-
-static int crunch_response_triggered(struct client_state *csp, const struct cruncher crunchers[]);
-
-/* Complete list of cruncher functions */
-static const struct cruncher crunchers_all[] = {
-   { direct_response, CF_COUNT_AS_REJECT|CF_IGNORE_FORCE},
-   { block_url,       CF_COUNT_AS_REJECT },
-#ifdef FEATURE_TRUST
-   { trust_url,       CF_COUNT_AS_REJECT },
-#endif /* def FEATURE_TRUST */
-   { redirect_url,    CF_NO_FLAGS  },
-   { dispatch_cgi,    CF_IGNORE_FORCE},
-   { NULL,            0 }
-};
-
-/* Light version, used after tags are applied */
-static const struct cruncher crunchers_light[] = {
-   { block_url,       CF_COUNT_AS_REJECT },
-   { redirect_url,    CF_NO_FLAGS },
-   { NULL,            0 }
-};
-
-
-/*
- * XXX: Don't we really mean
- *
- * #if defined(unix)
- *
- * here?
- */
-#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA)
-/*********************************************************************
- *
- * Function    :  sig_handler 
- *
- * Description :  Signal handler for different signals.
- *                Exit gracefully on TERM and INT
- *                or set a flag that will cause the errlog
- *                to be reopened by the main thread on HUP.
- *
- * Parameters  :
- *          1  :  the_signal = the signal cause this function to call
- *
- * Returns     :  - 
- *
- *********************************************************************/
-static void sig_handler(int the_signal)
-{
-   switch(the_signal)
-   {
-      case SIGTERM:
-      case SIGINT:
-         log_error(LOG_LEVEL_INFO, "exiting by signal %d .. bye", the_signal);
-#if defined(unix)
-         if(pidfile)
-         {
-            unlink(pidfile);
-         }
-#endif /* unix */
-         exit(the_signal);
-         break;
-
-      case SIGHUP:
-#if defined(unix)
-         received_hup_signal = 1;
-#endif
-         break;         
-
-      default:
-         /* 
-          * We shouldn't be here, unless we catch signals
-          * in main() that we can't handle here!
-          */
-         log_error(LOG_LEVEL_FATAL, "sig_handler: exiting on unexpected signal %d", the_signal);
-   }
-   return;
-
-}
-#endif
-
-
-/*********************************************************************
- *
- * Function    :  client_protocol_is_unsupported
- *
- * Description :  Checks if the client used a known unsupported
- *                protocol and deals with it by sending an error
- *                response.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  req = the first request line send by the client
- *
- * Returns     :  TRUE if an error response has been generated, or
- *                FALSE if the request doesn't look invalid.
- *
- *********************************************************************/
-static int client_protocol_is_unsupported(const struct client_state *csp, char *req)
-{
-   /*
-    * If it's a FTP or gopher request, we don't support it.
-    *
-    * These checks are better than nothing, but they might
-    * not work in all configurations and some clients might
-    * have problems digesting the answer.
-    *
-    * They should, however, never cause more problems than
-    * Privoxy's old behaviour (returning the misleading HTML
-    * error message:
-    *
-    * "Could not resolve http://(ftp|gopher)://example.org").
-    */
-   if (!strncmpic(req, "GET ftp://";, 10) || !strncmpic(req, "GET gopher://";, 13))
-   {
-      const char *response = NULL;
-      const char *protocol = NULL;
-
-      if (!strncmpic(req, "GET ftp://";, 10))
-      {
-         response = FTP_RESPONSE;
-         protocol = "FTP";
-      }
-      else
-      {
-         response = GOPHER_RESPONSE;
-         protocol = "GOPHER";
-      }
-      log_error(LOG_LEVEL_ERROR,
-         "%s tried to use Privoxy as %s proxy: %s",
-         csp->ip_addr_str, protocol, req);
-      log_error(LOG_LEVEL_CLF,
-         "%s - - [%T] \"%s\" 400 0", csp->ip_addr_str, req);
-      freez(req);
-      write_socket(csp->cfd, response, strlen(response));
-
-      return TRUE;
-   }
-
-   return FALSE;
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_request_destination_elsewhere
- *
- * Description :  If the client's request was redirected into
- *                Privoxy without the client's knowledge,
- *                the request line lacks the destination host.
- *
- *                This function tries to get it elsewhere,
- *                provided accept-intercepted-requests is enabled.
- *
- *                "Elsewhere" currently only means "Host: header",
- *                but in the future we may ask the redirecting
- *                packet filter to look the destination up.
- *
- *                If the destination stays unknown, an error
- *                response is send to the client and headers
- *                are freed so that chat() can return directly.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  headers = a header list
- *
- * Returns     :  JB_ERR_OK if the destination is now known, or
- *                JB_ERR_PARSE if it isn't.
- *
- *********************************************************************/
-static jb_err get_request_destination_elsewhere(struct client_state *csp, struct list *headers)
-{
-   char *req;
-
-   if (!(csp->config->feature_flags & RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS))
-   {
-      log_error(LOG_LEVEL_ERROR, "%s's request: \'%s\' is invalid."
-         " Privoxy isn't configured to accept intercepted requests.",
-         csp->ip_addr_str, csp->http->cmd);
-      /* XXX: Use correct size */
-      log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 400 0",
-         csp->ip_addr_str, csp->http->cmd);
-
-      write_socket(csp->cfd, CHEADER, strlen(CHEADER));
-      destroy_list(headers);
-
-      return JB_ERR_PARSE;
-   }
-   else if (JB_ERR_OK == get_destination_from_headers(headers, csp->http))
-   {
-      /* Split the domain we just got for pattern matching */
-      init_domain_components(csp->http);
-
-      return JB_ERR_OK;
-   }
-   else
-   {
-      /* We can't work without destination. Go spread the news.*/
-
-      req = list_to_text(headers);
-      chomp(req);
-      /* XXX: Use correct size */
-      log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 400 0",
-         csp->ip_addr_str, csp->http->cmd);
-      log_error(LOG_LEVEL_ERROR,
-         "Privoxy was unable to get the destination for %s's request:\n%s\n%s",
-         csp->ip_addr_str, csp->http->cmd, req);
-      freez(req);
-
-      write_socket(csp->cfd, MISSING_DESTINATION_RESPONSE, strlen(MISSING_DESTINATION_RESPONSE));
-      destroy_list(headers);
-
-      return JB_ERR_PARSE;
-   }
-   /*
-    * TODO: If available, use PF's ioctl DIOCNATLOOK as last resort
-    * to get the destination IP address, use it as host directly
-    * or do a reverse DNS lookup first.
-    */
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_server_headers
- *
- * Description :  Parses server headers in iob and fills them
- *                into csp->headers so that they can later be
- *                handled by sed().
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK if everything went fine, or
- *                JB_ERR_PARSE if the headers were incomplete.
- *
- *********************************************************************/
-static jb_err get_server_headers(struct client_state *csp)
-{
-   int continue_hack_in_da_house = 0;
-   char * header;
-
-   while (((header = get_header(csp->iob)) != NULL) || continue_hack_in_da_house)
-   {
-      if (header == NULL)
-      {
-         /*
-          * continue hack in da house. Ignore the ending of
-          * this head and continue enlisting header lines.
-          * The reason is described below.
-          */
-         enlist(csp->headers, "");
-         continue_hack_in_da_house = 0;
-         continue;
-      }
-      else if (0 == strncmpic(header, "HTTP/1.1 100", 12))
-      {
-         /*
-          * It's a bodyless continue response, don't
-          * stop header parsing after reaching its end.
-          *
-          * As a result Privoxy will concatenate the
-          * next response's head and parse and deliver
-          * the headers as if they belonged to one request.
-          *
-          * The client will separate them because of the
-          * empty line between them.
-          *
-          * XXX: What we're doing here is clearly against
-          * the intended purpose of the continue header,
-          * and under some conditions (HTTP/1.0 client request)
-          * it's a standard violation.
-          *
-          * Anyway, "sort of against the spec" is preferable
-          * to "always getting confused by Continue responses"
-          * (Privoxy's behaviour before this hack was added)
-          */
-         log_error(LOG_LEVEL_HEADER, "Continue hack in da house.");
-         continue_hack_in_da_house = 1;
-      }
-      else if (*header == '\0') 
-      {
-         /*
-          * If the header is empty, but the Continue hack
-          * isn't active, we can assume that we reached the
-          * end of the buffer before we hit the end of the
-          * head.
-          *
-          * Inform the caller an let it decide how to handle it.
-          */
-         return JB_ERR_PARSE;
-      }
-
-      if (JB_ERR_MEMORY == enlist(csp->headers, header))
-      {
-         /*
-          * XXX: Should we quit the request and return a
-          * out of memory error page instead?
-          */
-         log_error(LOG_LEVEL_ERROR,
-            "Out of memory while enlisting server headers. %s lost.",
-            header);
-      }
-      freez(header);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  crunch_reason
- *
- * Description :  Translates the crunch reason code into a string.
- *
- * Parameters  :
- *          1  :  rsp = a http_response
- *
- * Returns     :  A string with the crunch reason or an error description.
- *
- *********************************************************************/
-static const char *crunch_reason(const struct http_response *rsp)
-{
-   char * reason = NULL;
-
-   assert(rsp != NULL);
-   if (rsp == NULL)
-   {
-      return "Internal error while searching for crunch reason";
-   }
-
-   switch (rsp->reason)
-   {
-      case RSP_REASON_UNSUPPORTED:
-         reason = "Unsupported HTTP feature";
-         break;
-      case RSP_REASON_BLOCKED:
-         reason = "Blocked";
-         break;
-      case RSP_REASON_UNTRUSTED:
-         reason = "Untrusted";
-         break;
-      case RSP_REASON_REDIRECTED:
-         reason = "Redirected";
-         break;
-      case RSP_REASON_CGI_CALL:
-         reason = "CGI Call";
-         break;
-      case RSP_REASON_NO_SUCH_DOMAIN:
-         reason = "DNS failure";
-         break;
-      case RSP_REASON_FORWARDING_FAILED:
-         reason = "Forwarding failed";
-         break;
-      case RSP_REASON_CONNECT_FAILED:
-         reason = "Connection failure";
-         break;
-      case RSP_REASON_OUT_OF_MEMORY:
-         reason = "Out of memory (may mask other reasons)";
-         break;
-      default:
-         reason = "No reason recorded";
-         break;
-   }
-
-   return reason;
-}
-
-
-/*********************************************************************
- *
- * Function    :  send_crunch_response
- *
- * Description :  Delivers already prepared response for
- *                intercepted requests, logs the interception
- *                and frees the response.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          1  :  rsp = Fully prepared response. Will be freed on exit.
- *
- * Returns     :  Nothing.
- *
- *********************************************************************/
-static void send_crunch_response(const struct client_state *csp, struct http_response *rsp)
-{
-      const struct http_request *http = csp->http;
-      char status_code[4];
-
-      assert(rsp != NULL);
-      assert(rsp->head != NULL);
-
-      if (rsp == NULL)
-      {
-         /*
-          * Not supposed to happen. If it does
-          * anyway, treat it as an unknown error.
-          */
-         cgi_error_unknown(csp, rsp, RSP_REASON_INTERNAL_ERROR);
-         /* return code doesn't matter */
-      }
-
-      if (rsp == NULL)
-      {
-         /* If rsp is still NULL, we have serious internal problems. */
-         log_error(LOG_LEVEL_FATAL,
-            "NULL response in send_crunch_response and cgi_error_unknown failed as well.");
-      }
-
-      /*
-       * Extract the status code from the actual head
-       * that was send to the client. It is the only
-       * way to get it right for all requests, including
-       * the fixed ones for out-of-memory problems.
-       *
-       * A head starts like this: 'HTTP/1.1 200...'
-       *                           0123456789|11
-       *                                     10
-       */
-      status_code[0] = rsp->head[9];
-      status_code[1] = rsp->head[10];
-      status_code[2] = rsp->head[11];
-      status_code[3] = '\0';
-
-      /* Write the answer to the client */
-      if (write_socket(csp->cfd, rsp->head, rsp->head_length)
-       || write_socket(csp->cfd, rsp->body, rsp->content_length))
-      {
-         /* There is nothing we can do about it. */
-         log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", csp->http->host);
-      }
-
-      /* Log that the request was crunched and why. */
-      log_error(LOG_LEVEL_CRUNCH, "%s: %s", crunch_reason(rsp), http->url);
-      log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" %s %u",
-         csp->ip_addr_str, http->ocmd, status_code, rsp->content_length);
-
-      /* Clean up and return */
-      if (cgi_error_memory() != rsp)
-      {
-         free_http_response(rsp);
-      } 
-      return;
-}
-
-
-#if 0
-/*********************************************************************
- *
- * Function    :  request_contains_null_bytes
- *
- * Description :  Checks for NULL bytes in the request and sends
- *                an error message to the client if any were found.
- *
- *                XXX: currently not used, see comment in chat().
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  buf = Data from the client's request to check.
- *          3  :  len = The data length.
- *
- * Returns     :  TRUE if the request contained one or more NULL bytes, or
- *                FALSE otherwise.
- *
- *********************************************************************/
-static int request_contains_null_bytes(const struct client_state *csp, char *buf, int len)
-{
-   size_t c_len; /* Request lenght when treated as C string */
-
-   c_len = strlen(buf);
-
-   if (c_len < len)
-   {
-      /*
-       * Null byte(s) found. Log the request,
-       * return an error response and hang up.
-       */
-      size_t tmp_len = c_len;
-
-      do
-      {
-        /*
-         * Replace NULL byte(s) with '°' characters
-         * so the request can be logged as string.
-         * XXX: Is there a better replacement character?
-         */
-         buf[tmp_len]='°';
-         tmp_len += strlen(buf+tmp_len);
-      } while (tmp_len < len);
-
-      log_error(LOG_LEVEL_ERROR, "%s\'s request contains at least one NULL byte "
-         "(length=%d, strlen=%u).", csp->ip_addr_str, len, c_len);
-      log_error(LOG_LEVEL_HEADER, 
-         "Offending request data with NULL bytes turned into \'°\' characters: %s", buf);
-
-      write_socket(csp->cfd, NULL_BYTE_RESPONSE, strlen(NULL_BYTE_RESPONSE));
-
-      /* XXX: Log correct size */
-      log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str);
-
-      return TRUE;
-   }
-
-   return FALSE;
-}
-#endif
-
-
-/*********************************************************************
- *
- * Function    :  crunch_response_triggered
- *
- * Description :  Checks if the request has to be crunched,
- *                and delivers the crunch response if necessary.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  crunchers = list of cruncher functions to run
- *
- * Returns     :  TRUE if the request was answered with a crunch response
- *                FALSE otherwise.
- *
- *********************************************************************/
-static int crunch_response_triggered(struct client_state *csp, const struct cruncher crunchers[])
-{
-   struct http_response *rsp = NULL;
-   const struct cruncher *c;
-
-   /*
-    * If CGI request crunching is disabled,
-    * check the CGI dispatcher out of order to
-    * prevent unintentional blocks or redirects. 
-    */
-   if (!(csp->config->feature_flags & RUNTIME_FEATURE_CGI_CRUNCHING)
-       && (NULL != (rsp = dispatch_cgi(csp))))
-   {
-      /* Deliver, log and free the interception response. */
-      send_crunch_response(csp, rsp);
-      return TRUE;
-   }
-
-   for (c = crunchers; c->cruncher != NULL; c++)
-   {
-      /*
-       * Check the cruncher if either Privoxy is toggled
-       * on and the request isn't forced, or if the cruncher
-       * applies to forced requests as well.
-       */
-      if (((csp->flags & CSP_FLAG_TOGGLED_ON) &&
-          !(csp->flags & CSP_FLAG_FORCED)) ||
-          (c->flags & CF_IGNORE_FORCE))
-      {
-         rsp = c->cruncher(csp);
-         if (NULL != rsp)
-         {
-            /* Deliver, log and free the interception response. */
-            send_crunch_response(csp, rsp);
-#ifdef FEATURE_STATISTICS
-            if (c->flags & CF_COUNT_AS_REJECT)
-            {
-               csp->flags |= CSP_FLAG_REJECTED;
-            }
-#endif /* def FEATURE_STATISTICS */
-
-            return TRUE;
-         }
-      }
-   }
-
-   return FALSE;
-}
-
-
-/*********************************************************************
- *
- * Function    :  build_request_line
- *
- * Description :  Builds the HTTP request line.
- *
- *                If a HTTP forwarder is used it expects the whole URL,
- *                web servers only get the path.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  fwd = The forwarding spec used for the request
- *                XXX: Should use http->fwd instead.
- *          3  :  request_line = The old request line which will be replaced.
- *
- * Returns     :  Nothing. Terminates in case of memory problems.
- *
- *********************************************************************/
-static void build_request_line(struct client_state *csp, const struct forward_spec *fwd, char **request_line)
-{
-   struct http_request *http = csp->http;
-
-   assert(http->ssl == 0);
-
-   /*
-    * Downgrade http version from 1.1 to 1.0
-    * if +downgrade action applies.
-    */
-   if ( (csp->action->flags & ACTION_DOWNGRADE)
-     && (!strcmpic(http->ver, "HTTP/1.1")))
-   {
-      freez(http->ver);
-      http->ver = strdup("HTTP/1.0");
-
-      if (http->ver == NULL)
-      {
-         log_error(LOG_LEVEL_FATAL, "Out of memory downgrading HTTP version");
-      }
-   }
-
-   /*
-    * Rebuild the request line.
-    */
-   freez(*request_line);
-   *request_line = strdup(http->gpc);
-   string_append(request_line, " ");
-
-   if (fwd->forward_host)
-   {
-      string_append(request_line, http->url);
-   }
-   else
-   {
-      string_append(request_line, http->path);
-   }
-   string_append(request_line, " ");
-   string_append(request_line, http->ver);
-
-   if (*request_line == NULL)
-   {
-      log_error(LOG_LEVEL_FATAL, "Out of memory writing HTTP command");
-   }
-   log_error(LOG_LEVEL_HEADER, "New HTTP Request-Line: %s", *request_line);
-}
-
-
-/*********************************************************************
- *
- * Function    :  change_request_destination
- *
- * Description :  Parse a (rewritten) request line and regenerate
- *                the http request data.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  Forwards the parse_http_request() return code.
- *                Terminates in case of memory problems.
- *
- *********************************************************************/
-static jb_err change_request_destination(struct client_state *csp)
-{
-   struct http_request *http = csp->http;
-   jb_err err;
-
-   log_error(LOG_LEVEL_INFO, "Rewrite detected: %s", csp->headers->first->str);
-   free_http_request(http);
-   err = parse_http_request(csp->headers->first->str, http);
-   if (JB_ERR_OK != err)
-   {
-      log_error(LOG_LEVEL_ERROR, "Couldn't parse rewritten request: %s.",
-         jb_err_to_string(err));
-   }
-   else
-   {
-      /* XXX: ocmd is a misleading name */
-      http->ocmd = strdup(http->cmd);
-      if (http->ocmd == NULL)
-      {
-         log_error(LOG_LEVEL_FATAL,
-            "Out of memory copying rewritten HTTP request line");
-      }
-   }
-
-   return err;
-}
-
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-/*********************************************************************
- *
- * Function    :  server_response_is_complete
- *
- * Description :  Determines whether we should stop reading
- *                from the server socket.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  content_length = Length of content received so far.
- *
- * Returns     :  TRUE if the response is complete,
- *                FALSE otherwise.
- *
- *********************************************************************/
-static int server_response_is_complete(struct client_state *csp,
-   unsigned long long content_length)
-{
-   int content_length_known = !!(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET);
-
-   if (!strcmpic(csp->http->gpc, "HEAD"))
-   {
-      /*
-       * "HEAD" implies no body, we are thus expecting
-       * no content. XXX: incomplete "list" of methods?
-       */
-      csp->expected_content_length = 0;
-      content_length_known = TRUE;
-   }
-
-   if (csp->http->status == 304)
-   {
-      /*
-       * Expect no body. XXX: incomplete "list" of status codes?
-       */
-      csp->expected_content_length = 0;
-      content_length_known = TRUE;
-   }
-
-   return (content_length_known && ((0 == csp->expected_content_length)
-            || (csp->expected_content_length <= content_length)));
-}
-
-
-/*********************************************************************
- *
- * Function    :  wait_for_alive_connections
- *
- * Description :  Waits for alive connections to timeout.
- *
- * Parameters  :  N/A
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void wait_for_alive_connections()
-{
-   int connections_alive = close_unusable_connections();
-
-   while (0 < connections_alive)
-   {
-      log_error(LOG_LEVEL_CONNECT,
-         "Waiting for %d connections to timeout.",
-         connections_alive);
-      sleep(60);
-      connections_alive = close_unusable_connections();
-   }
-
-   log_error(LOG_LEVEL_CONNECT, "No connections to wait for left.");
-
-}
-#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
-
-
-/*********************************************************************
- *
- * Function    :  mark_server_socket_tainted
- *
- * Description :  Makes sure we don't reuse a server socket
- *                (if we didn't read everything the server sent
- *                us reusing the socket would lead to garbage).
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  void.
- *
- *********************************************************************/
-static void mark_server_socket_tainted(struct client_state *csp)
-{
-   if ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE))
-   {
-      log_error(LOG_LEVEL_CONNECT, "Unsetting keep-alive flag.");
-      csp->flags &= ~CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE;
-   }
-}
-
-/*********************************************************************
- *
- * Function    :  get_request_line
- *
- * Description : Read the client request line.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  Pointer to request line or NULL in case of errors.
- *
- *********************************************************************/
-static char *get_request_line(struct client_state *csp)
-{
-   char buf[BUFFER_SIZE];
-   char *request_line = NULL;
-   int len;
-
-   memset(buf, 0, sizeof(buf));
-
-   do
-   {
-      if (!data_is_available(csp->cfd, csp->config->socket_timeout))
-      {
-         log_error(LOG_LEVEL_ERROR,
-            "Stopped waiting for the request line.");
-         write_socket(csp->cfd, CONNECTION_TIMEOUT_RESPONSE,
-            strlen(CONNECTION_TIMEOUT_RESPONSE));
-         return NULL;
-      }
-
-      len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
-
-      if (len <= 0) return NULL;
-
-      /*
-       * If there is no memory left for buffering the
-       * request, there is nothing we can do but hang up
-       */
-      if (add_to_iob(csp, buf, len))
-      {
-         return NULL;
-      }
-
-      request_line = get_header(csp->iob);
-
-   } while ((NULL != request_line) && ('\0' == *request_line));
-
-   return request_line;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  receive_client_request
- *
- * Description : Read the client's request (more precisely the
- *               client headers) and answer it if necessary.
- *
- *               Note that since we're not using select() we could get
- *               blocked here if a client connected, then didn't say
- *               anything!
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK, JB_ERR_PARSE or JB_ERR_MEMORY
- *
- *********************************************************************/
-static jb_err receive_client_request(struct client_state *csp)
-{
-   char buf[BUFFER_SIZE];
-   char *p;
-   char *req = NULL;
-   struct http_request *http;
-   int len;
-   jb_err err;
-
-   /* Temporary copy of the client's headers before they get enlisted in csp->headers */
-   struct list header_list;
-   struct list *headers = &header_list;
-
-   http = csp->http;
-
-   memset(buf, 0, sizeof(buf));
-
-   req = get_request_line(csp);
-   if (req == NULL)
-   {
-      return JB_ERR_PARSE;
-   }
-   assert(*req != '\0');
-
-   if (client_protocol_is_unsupported(csp, req))
-   {
-      return JB_ERR_PARSE;
-   }
-
-#ifdef FEATURE_FORCE_LOAD
-   /*
-    * If this request contains the FORCE_PREFIX and blocks
-    * aren't enforced, get rid of it and set the force flag.
-    */
-   if (strstr(req, FORCE_PREFIX))
-   {
-      if (csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
-      {
-         log_error(LOG_LEVEL_FORCE,
-            "Ignored force prefix in request: \"%s\".", req);
-      }
-      else
-      {
-         strclean(req, FORCE_PREFIX);
-         log_error(LOG_LEVEL_FORCE, "Enforcing request: \"%s\".", req);
-         csp->flags |= CSP_FLAG_FORCED;
-      }
-   }
-#endif /* def FEATURE_FORCE_LOAD */
-
-   err = parse_http_request(req, http);
-   freez(req);
-   if (JB_ERR_OK != err)
-   {
-      write_socket(csp->cfd, CHEADER, strlen(CHEADER));
-      /* XXX: Use correct size */
-      log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str);
-      log_error(LOG_LEVEL_ERROR,
-         "Couldn't parse request line received from %s: %s",
-         csp->ip_addr_str, jb_err_to_string(err));
-
-      free_http_request(http);
-      return JB_ERR_PARSE;
-   }
-
-   /* grab the rest of the client's headers */
-   init_list(headers);
-   for (;;)
-   {
-      p = get_header(csp->iob);
-
-      if (p == NULL)
-      {
-         /* There are no additional headers to read. */
-         break;
-      }
-
-      if (*p == '\0')
-      {
-         /*
-          * We didn't receive a complete header
-          * line yet, get the rest of it.
-          */
-         if (!data_is_available(csp->cfd, csp->config->socket_timeout))
-         {
-            log_error(LOG_LEVEL_ERROR,
-               "Stopped grabbing the client headers.");
-            return JB_ERR_PARSE;
-         }
-
-         len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
-         if (len <= 0)
-         {
-            log_error(LOG_LEVEL_ERROR, "read from client failed: %E");
-            destroy_list(headers);
-            return JB_ERR_PARSE;
-         }
-         
-         if (add_to_iob(csp, buf, len))
-         {
-            /*
-             * If there is no memory left for buffering the
-             * request, there is nothing we can do but hang up
-             */
-            destroy_list(headers);
-            return JB_ERR_MEMORY;
-         }
-      }
-      else
-      {
-         /*
-          * We were able to read a complete
-          * header and can finaly enlist it.
-          */
-         enlist(headers, p);
-         freez(p);
-      }
-   }
-
-   if (http->host == NULL)
-   {
-      /*
-       * If we still don't know the request destination,
-       * the request is invalid or the client uses
-       * Privoxy without its knowledge.
-       */
-      if (JB_ERR_OK != get_request_destination_elsewhere(csp, headers))
-      {
-         /*
-          * Our attempts to get the request destination
-          * elsewhere failed or Privoxy is configured
-          * to only accept proxy requests.
-          *
-          * An error response has already been send
-          * and we're done here.
-          */
-         return JB_ERR_PARSE;
-      }
-   }
-
-   /*
-    * Determine the actions for this URL
-    */
-#ifdef FEATURE_TOGGLE
-   if (!(csp->flags & CSP_FLAG_TOGGLED_ON))
-   {
-      /* Most compatible set of actions (i.e. none) */
-      init_current_action(csp->action);
-   }
-   else
-#endif /* ndef FEATURE_TOGGLE */
-   {
-      get_url_actions(csp, http);
-   }
-
-   /* 
-    * Save a copy of the original request for logging
-    */
-   http->ocmd = strdup(http->cmd);
-   if (http->ocmd == NULL)
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "Out of memory copying HTTP request line");
-   }
-   enlist(csp->headers, http->cmd);
-
-   /* Append the previously read headers */
-   list_append_list_unique(csp->headers, headers);
-   destroy_list(headers);
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    : parse_client_request
- *
- * Description : Parses the client's request and decides what to do
- *               with it.
- *
- *               Note that since we're not using select() we could get
- *               blocked here if a client connected, then didn't say
- *               anything!
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK or JB_ERR_PARSE
- *
- *********************************************************************/
-static jb_err parse_client_request(struct client_state *csp)
-{
-   struct http_request *http = csp->http;
-   jb_err err;
-
-   err = sed(csp, FILTER_CLIENT_HEADERS);
-   if (JB_ERR_OK != err)
-   {
-      /* XXX: Should be handled in sed(). */
-      assert(err == JB_ERR_PARSE);
-      log_error(LOG_LEVEL_FATAL, "Failed to parse client headers.");
-   }
-   csp->flags |= CSP_FLAG_CLIENT_HEADER_PARSING_DONE;
-
-   /* Check request line for rewrites. */
-   if ((NULL == csp->headers->first->str)
-      || (strcmp(http->cmd, csp->headers->first->str) &&
-         (JB_ERR_OK != change_request_destination(csp))))
-   {
-      /*
-       * A header filter broke the request line - bail out.
-       */
-      write_socket(csp->cfd, MESSED_UP_REQUEST_RESPONSE, strlen(MESSED_UP_REQUEST_RESPONSE));
-      /* XXX: Use correct size */
-      log_error(LOG_LEVEL_CLF,
-         "%s - - [%T] \"Invalid request generated\" 500 0", csp->ip_addr_str);
-      log_error(LOG_LEVEL_ERROR,
-         "Invalid request line after applying header filters.");
-      free_http_request(http);
-
-      return JB_ERR_PARSE;
-   }
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  chat
- *
- * Description :  Once a connection to the client has been accepted,
- *                this function is called (via serve()) to handle the
- *                main business of the communication.  When this
- *                function returns, the caller must close the client
- *                socket handle.
- *
- *                FIXME: chat is nearly thousand lines long.
- *                Ridiculous.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  Nothing.
- *
- *********************************************************************/
-static void chat(struct client_state *csp)
-{
-   char buf[BUFFER_SIZE];
-   char *hdr;
-   char *p;
-   fd_set rfds;
-   int n;
-   jb_socket maxfd;
-   int server_body;
-   int ms_iis5_hack = 0;
-   unsigned long long byte_count = 0;
-   int forwarded_connect_retries = 0;
-   int max_forwarded_connect_retries = csp->config->forwarded_connect_retries;
-   const struct forward_spec *fwd;
-   struct http_request *http;
-   long len = 0; /* for buffer sizes (and negative error codes) */
-
-   /* Function that does the content filtering for the current request */
-   filter_function_ptr content_filter = NULL;
-
-   /* Skeleton for HTTP response, if we should intercept the request */
-   struct http_response *rsp;
-   struct timeval timeout;
-
-   memset(buf, 0, sizeof(buf));
-
-   http = csp->http;
-
-   if (receive_client_request(csp) != JB_ERR_OK)
-   {
-      return;
-   }
-   if (parse_client_request(csp) != JB_ERR_OK)
-   {
-      return;
-   }
-
-   /* decide how to route the HTTP request */
-   fwd = forward_url(csp, http);
-   if (NULL == fwd)
-   {
-      log_error(LOG_LEVEL_FATAL, "gateway spec is NULL!?!?  This can't happen!");
-      /* Never get here - LOG_LEVEL_FATAL causes program exit */
-      return;
-   }
-
-   /*
-    * build the http request to send to the server
-    * we have to do one of the following:
-    *
-    * create = use the original HTTP request to create a new
-    *          HTTP request that has either the path component
-    *          without the http://domainspec (w/path) or the
-    *          full orininal URL (w/url)
-    *          Note that the path and/or the HTTP version may
-    *          have been altered by now.
-    *
-    * connect = Open a socket to the host:port of the server
-    *           and short-circuit server and client socket.
-    *
-    * pass =  Pass the request unchanged if forwarding a CONNECT
-    *         request to a parent proxy. Note that we'll be sending
-    *         the CFAIL message ourselves if connecting to the parent
-    *         fails, but we won't send a CSUCCEED message if it works,
-    *         since that would result in a double message (ours and the
-    *         parent's). After sending the request to the parent, we simply
-    *         tunnel.
-    *
-    * here's the matrix:
-    *                        SSL
-    *                    0        1
-    *                +--------+--------+
-    *                |        |        |
-    *             0  | create | connect|
-    *                | w/path |        |
-    *  Forwarding    +--------+--------+
-    *                |        |        |
-    *             1  | create | pass   |
-    *                | w/url  |        |
-    *                +--------+--------+
-    *
-    */
-
-   if (http->ssl && connect_port_is_forbidden(csp))
-   {
-      const char *acceptable_connect_ports =
-         csp->action->string[ACTION_STRING_LIMIT_CONNECT];
-      assert(NULL != acceptable_connect_ports);
-      log_error(LOG_LEVEL_INFO, "Request from %s marked for blocking. "
-         "limit-connect{%s} doesn't allow CONNECT requests to port %d.",
-         csp->ip_addr_str, acceptable_connect_ports, csp->http->port);
-      csp->action->flags |= ACTION_BLOCK;
-      http->ssl = 0;
-   }
-
-   if (http->ssl == 0)
-   {
-      freez(csp->headers->first->str);
-      build_request_line(csp, fwd, &csp->headers->first->str);
-   }
-
-   /*
-    * We have a request. Check if one of the crunchers wants it.
-    */
-   if (crunch_response_triggered(csp, crunchers_all))
-   {
-      /*
-       * Yes. The client got the crunch response
-       * and we are done here after cleaning up.
-       */
-      /* XXX: why list_remove_all()? */
-      list_remove_all(csp->headers);
-
-      return;
-   }
-
-   log_error(LOG_LEVEL_GPC, "%s%s", http->hostport, http->path);
-
-   if (fwd->forward_host)
-   {
-      log_error(LOG_LEVEL_CONNECT, "via %s:%d to: %s",
-         fwd->forward_host, fwd->forward_port, http->hostport);
-   }
-   else
-   {
-      log_error(LOG_LEVEL_CONNECT, "to %s", http->hostport);
-   }
-
-   /* here we connect to the server, gateway, or the forwarder */
-
-   while ((csp->sfd = forwarded_connect(fwd, http, csp))
-      && (errno == EINVAL)
-      && (forwarded_connect_retries++ < max_forwarded_connect_retries))
-   {
-      log_error(LOG_LEVEL_ERROR,
-         "failed request #%u to connect to %s. Trying again.",
-         forwarded_connect_retries, http->hostport);
-   }
-
-   if (csp->sfd == JB_INVALID_SOCKET)
-   {
-      if (fwd->type != SOCKS_NONE)
-      {
-         /* Socks error. */
-         rsp = error_response(csp, "forwarding-failed", errno);
-      }
-      else if (errno == EINVAL)
-      {
-         rsp = error_response(csp, "no-such-domain", errno);
-      }
-      else
-      {
-         rsp = error_response(csp, "connect-failed", errno);
-         log_error(LOG_LEVEL_CONNECT, "connect to: %s failed: %E",
-            http->hostport);
-      }
-
-      /* Write the answer to the client */
-      if (rsp != NULL)
-      {
-         send_crunch_response(csp, rsp);
-      }
-
-      return;
-   }
-
-   hdr = list_to_text(csp->headers);
-   if (hdr == NULL)
-   {
-      /* FIXME Should handle error properly */
-      log_error(LOG_LEVEL_FATAL, "Out of memory parsing client header");
-   }
-   list_remove_all(csp->headers);
-
-   if (fwd->forward_host || (http->ssl == 0))
-   {
-      /*
-       * Write the client's (modified) header to the server
-       * (along with anything else that may be in the buffer)
-       */
-      if (write_socket(csp->sfd, hdr, strlen(hdr))
-       || (flush_socket(csp->sfd, csp->iob) <  0))
-      {
-         log_error(LOG_LEVEL_CONNECT,
-            "write header to: %s failed: %E", http->hostport);
-
-         rsp = error_response(csp, "connect-failed", errno);
-         if (rsp)
-         {
-            send_crunch_response(csp, rsp);
-         }
-
-         freez(hdr);
-         return;
-      }
-   }
-   else
-   {
-      /*
-       * We're running an SSL tunnel and we're not forwarding,
-       * so just send the "connect succeeded" message to the
-       * client, flush the rest, and get out of the way.
-       */
-      if (write_socket(csp->cfd, CSUCCEED, strlen(CSUCCEED)))
-      {
-         freez(hdr);
-         return;
-      }
-      IOB_RESET(csp);
-   }
-
-   log_error(LOG_LEVEL_CONNECT, "to %s successful", http->hostport);
-
-   /* we're finished with the client's header */
-   freez(hdr);
-
-   maxfd = (csp->cfd > csp->sfd) ? csp->cfd : csp->sfd;
-
-   /* pass data between the client and server
-    * until one or the other shuts down the connection.
-    */
-
-   server_body = 0;
-
-   for (;;)
-   {
-#ifdef __OS2__
-      /*
-       * FD_ZERO here seems to point to an errant macro which crashes.
-       * So do this by hand for now...
-       */
-      memset(&rfds,0x00,sizeof(fd_set));
-#else
-      FD_ZERO(&rfds);
-#endif
-      FD_SET(csp->cfd, &rfds);
-      FD_SET(csp->sfd, &rfds);
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-      if ((csp->flags & CSP_FLAG_CHUNKED)
-         && !(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
-         && ((csp->iob->eod - csp->iob->cur) >= 5)
-         && !memcmp(csp->iob->eod-5, "0\r\n\r\n", 5))
-      {
-         log_error(LOG_LEVEL_CONNECT,
-            "Looks like we read the last chunk together with "
-            "the server headers. We better stop reading.");
-         byte_count = (unsigned long long)(csp->iob->eod - csp->iob->cur);
-         csp->expected_content_length = byte_count;
-         csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
-      }
-      if (server_body && server_response_is_complete(csp, byte_count))
-      {
-         log_error(LOG_LEVEL_CONNECT,
-            "Done reading from server. Expected content length: %llu. "
-            "Actual content length: %llu. Most recently received: %d.",
-            csp->expected_content_length, byte_count, len);
-         len = 0;
-         /*
-          * XXX: should not jump around,
-          * chat() is complicated enough already.
-          */
-         goto reading_done;
-      }
-#endif  /* FEATURE_CONNECTION_KEEP_ALIVE */
-
-      timeout.tv_sec = csp->config->socket_timeout;
-      timeout.tv_usec = 0;
-      n = select((int)maxfd+1, &rfds, NULL, NULL, &timeout);
-
-      if (n == 0)
-      {
-         log_error(LOG_LEVEL_ERROR,
-            "Didn't receive data in time: %s", http->url);
-         if ((byte_count == 0) && (http->ssl == 0))
-         {
-            write_socket(csp->cfd, CONNECTION_TIMEOUT_RESPONSE,
-               strlen(CONNECTION_TIMEOUT_RESPONSE));
-         }
-         mark_server_socket_tainted(csp);
-         return;
-      }
-      else if (n < 0)
-      {
-         log_error(LOG_LEVEL_ERROR, "select() failed!: %E");
-         mark_server_socket_tainted(csp);
-         return;
-      }
-
-      /*
-       * This is the body of the browser's request,
-       * just read and write it.
-       */
-      if (FD_ISSET(csp->cfd, &rfds))
-      {
-         len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
-
-         if (len <= 0)
-         {
-            /* XXX: not sure if this is necessary. */
-            mark_server_socket_tainted(csp);
-            break; /* "game over, man" */
-         }
-
-         if (write_socket(csp->sfd, buf, (size_t)len))
-         {
-            log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", http->host);
-            mark_server_socket_tainted(csp);
-            return;
-         }
-         continue;
-      }
-
-      /*
-       * The server wants to talk. It could be the header or the body.
-       * If `hdr' is null, then it's the header otherwise it's the body.
-       * FIXME: Does `hdr' really mean `host'? No.
-       */
-      if (FD_ISSET(csp->sfd, &rfds))
-      {
-         fflush(0);
-         len = read_socket(csp->sfd, buf, sizeof(buf) - 1);
-
-         if (len < 0)
-         {
-            log_error(LOG_LEVEL_ERROR, "read from: %s failed: %E", http->host);
-
-            if (http->ssl && (fwd->forward_host == NULL))
-            {
-               /*
-                * Just hang up. We already confirmed the client's CONNECT
-                * request with status code 200 and unencrypted content is
-                * no longer welcome.
-                */
-               log_error(LOG_LEVEL_ERROR,
-                  "CONNECT already confirmed. Unable to tell the client about the problem.");
-               return;
-            }
-            else if (byte_count)
-            {
-               /*
-                * Just hang up. We already transmitted the original headers
-                * and parts of the original content and therefore missed the
-                * chance to send an error message (without risking data corruption).
-                *
-                * XXX: we could retry with a fancy range request here.
-                */
-               log_error(LOG_LEVEL_ERROR, "Already forwarded the original headers. "
-                  "Unable to tell the client about the problem.");
-               mark_server_socket_tainted(csp);
-               return;
-            }
-
-            rsp = error_response(csp, "connect-failed", errno);
-            if (rsp)
-            {
-               send_crunch_response(csp, rsp);
-            }
-
-            return;
-         }
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-         if (csp->flags & CSP_FLAG_CHUNKED)
-         {
-            if ((len >= 5) && !memcmp(buf+len-5, "0\r\n\r\n", 5))
-            {
-               /* XXX: this is a temporary hack */
-               log_error(LOG_LEVEL_CONNECT,
-                  "Looks like we reached the end of the last chunk. "
-                  "We better stop reading.");
-               csp->expected_content_length = byte_count + (unsigned long long)len;
-               csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
-            }
-         }
-         reading_done:
-#endif  /* FEATURE_CONNECTION_KEEP_ALIVE */
-
-         /*
-          * Add a trailing zero to let be able to use string operations.
-          * XXX: do we still need this with filter_popups gone?
-          */
-         buf[len] = '\0';
-
-         /*
-          * Normally, this would indicate that we've read
-          * as much as the server has sent us and we can
-          * close the client connection.  However, Microsoft
-          * in its wisdom has released IIS/5 with a bug that
-          * prevents it from sending the trailing \r\n in
-          * a 302 redirect header (and possibly other headers).
-          * To work around this if we've haven't parsed
-          * a full header we'll append a trailing \r\n
-          * and see if this now generates a valid one.
-          *
-          * This hack shouldn't have any impacts.  If we've
-          * already transmitted the header or if this is a
-          * SSL connection, then we won't bother with this
-          * hack.  So we only work on partially received
-          * headers.  If we append a \r\n and this still
-          * doesn't generate a valid header, then we won't
-          * transmit anything to the client.
-          */
-         if (len == 0)
-         {
-
-            if (server_body || http->ssl)
-            {
-               /*
-                * If we have been buffering up the document,
-                * now is the time to apply content modification
-                * and send the result to the client.
-                */
-               if (content_filter)
-               {
-                  p = execute_content_filter(csp, content_filter);
-                  /*
-                   * If the content filter fails, use the original
-                   * buffer and length.
-                   * (see p != NULL ? p : csp->iob->cur below)
-                   */
-                  if (NULL == p)
-                  {
-                     csp->content_length = (size_t)(csp->iob->eod - csp->iob->cur);
-                  }
-
-                  if (JB_ERR_OK != update_server_headers(csp))
-                  {
-                     log_error(LOG_LEVEL_FATAL,
-                        "Failed to update server headers. after filtering.");
-                  }
-
-                  hdr = list_to_text(csp->headers);
-                  if (hdr == NULL)
-                  {
-                     /* FIXME Should handle error properly */
-                     log_error(LOG_LEVEL_FATAL, "Out of memory parsing server header");
-                  }
-
-                  if (write_socket(csp->cfd, hdr, strlen(hdr))
-                   || write_socket(csp->cfd,
-                         ((p != NULL) ? p : csp->iob->cur), (size_t)csp->content_length))
-                  {
-                     log_error(LOG_LEVEL_ERROR, "write modified content to client failed: %E");
-                     freez(hdr);
-                     freez(p);
-                     mark_server_socket_tainted(csp);
-                     return;
-                  }
-
-                  freez(hdr);
-                  freez(p);
-               }
-
-               break; /* "game over, man" */
-            }
-
-            /*
-             * This is NOT the body, so
-             * Let's pretend the server just sent us a blank line.
-             */
-            snprintf(buf, sizeof(buf), "\r\n");
-            len = (int)strlen(buf);
-
-            /*
-             * Now, let the normal header parsing algorithm below do its
-             * job.  If it fails, we'll exit instead of continuing.
-             */
-
-            ms_iis5_hack = 1;
-         }
-
-         /*
-          * If this is an SSL connection or we're in the body
-          * of the server document, just write it to the client,
-          * unless we need to buffer the body for later content-filtering
-          */
-         if (server_body || http->ssl)
-         {
-            if (content_filter)
-            {
-               /*
-                * If there is no memory left for buffering the content, or the buffer limit
-                * has been reached, switch to non-filtering mode, i.e. make & write the
-                * header, flush the iob and buf, and get out of the way.
-                */
-               if (add_to_iob(csp, buf, len))
-               {
-                  size_t hdrlen;
-                  long flushed;
-
-                  log_error(LOG_LEVEL_INFO,
-                     "Flushing header and buffers. Stepping back from filtering.");
-
-                  hdr = list_to_text(csp->headers);
-                  if (hdr == NULL)
-                  {
-                     /* 
-                      * Memory is too tight to even generate the header.
-                      * Send our static "Out-of-memory" page.
-                      */
-                     log_error(LOG_LEVEL_ERROR, "Out of memory while trying to flush.");
-                     rsp = cgi_error_memory();
-                     send_crunch_response(csp, rsp);
-                     mark_server_socket_tainted(csp);
-                     return;
-                  }
-                  hdrlen = strlen(hdr);
-
-                  if (write_socket(csp->cfd, hdr, hdrlen)
-                   || ((flushed = flush_socket(csp->cfd, csp->iob)) < 0)
-                   || (write_socket(csp->cfd, buf, (size_t)len)))
-                  {
-                     log_error(LOG_LEVEL_CONNECT,
-                        "Flush header and buffers to client failed: %E");
-                     freez(hdr);
-                     mark_server_socket_tainted(csp);
-                     return;
-                  }
-
-                  /*
-                   * Reset the byte_count to the amount of bytes
-                   * we just flushed. len will be added a few lines below,
-                   * hdrlen doesn't matter for LOG_LEVEL_CLF.
-                   */
-                  byte_count = (unsigned long long)flushed;
-                  freez(hdr);
-                  content_filter = NULL;
-                  server_body = 1;
-               }
-            }
-            else
-            {
-               if (write_socket(csp->cfd, buf, (size_t)len))
-               {
-                  log_error(LOG_LEVEL_ERROR, "write to client failed: %E");
-                  mark_server_socket_tainted(csp);
-                  return;
-               }
-            }
-            byte_count += (unsigned long long)len;
-            continue;
-         }
-         else
-         {
-            const char *header_start;
-            /*
-             * We're still looking for the end of the server's header.
-             * Buffer up the data we just read.  If that fails, there's
-             * little we can do but send our static out-of-memory page.
-             */
-            if (add_to_iob(csp, buf, len))
-            {
-               log_error(LOG_LEVEL_ERROR, "Out of memory while looking for end of server headers.");
-               rsp = cgi_error_memory();
-               send_crunch_response(csp, rsp);               
-               mark_server_socket_tainted(csp);
-               return;
-            }
-
-            header_start = csp->iob->cur;
-
-            /* Convert iob into something sed() can digest */
-            if (JB_ERR_PARSE == get_server_headers(csp))
-            {
-               if (ms_iis5_hack)
-               {
-                  /*
-                   * Well, we tried our MS IIS/5 hack and it didn't work.
-                   * The header is incomplete and there isn't anything
-                   * we can do about it.
-                   */
-                  log_error(LOG_LEVEL_INFO,
-                     "MS IIS5 hack didn't produce valid headers.");
-                  break;
-               }
-               else
-               {
-                  /*
-                   * Since we have to wait for more from the server before
-                   * we can parse the headers we just continue here.
-                   */
-                  long header_offset = csp->iob->cur - header_start;
-                  assert(csp->iob->cur >= header_start);
-                  byte_count += (unsigned long long)(len - header_offset);
-                  log_error(LOG_LEVEL_CONNECT, "Continuing buffering headers. "
-                     "byte_count: %llu. header_offset: %d. len: %d.",
-                     byte_count, header_offset, len);
-                  continue;
-               }
-            }
-
-            /* Did we actually get anything? */
-            if (NULL == csp->headers->first)
-            {
-               log_error(LOG_LEVEL_ERROR, "Empty server or forwarder response.");
-               log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
-               write_socket(csp->cfd, NO_SERVER_DATA_RESPONSE, strlen(NO_SERVER_DATA_RESPONSE));
-               free_http_request(http);
-               mark_server_socket_tainted(csp);
-               return;
-            }
-
-            assert(csp->headers->first->str);
-            assert(!http->ssl);
-            if (strncmpic(csp->headers->first->str, "HTTP", 4) &&
-                strncmpic(csp->headers->first->str, "ICY", 3))
-            {
-               /*
-                * It doesn't look like a HTTP (or Shoutcast) response:
-                * tell the client and log the problem.
-                */
-               if (strlen(csp->headers->first->str) > 30)
-               {
-                  csp->headers->first->str[30] = '\0';
-               }
-               log_error(LOG_LEVEL_ERROR,
-                  "Invalid server or forwarder response. Starts with: %s",
-                  csp->headers->first->str);
-               log_error(LOG_LEVEL_CLF,
-                  "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
-               write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE,
-                  strlen(INVALID_SERVER_HEADERS_RESPONSE));
-               free_http_request(http);
-               mark_server_socket_tainted(csp);
-               return;
-            }
-
-            /*
-             * We have now received the entire server header,
-             * filter it and send the result to the client
-             */
-            if (JB_ERR_OK != sed(csp, FILTER_SERVER_HEADERS))
-            {
-               log_error(LOG_LEVEL_FATAL, "Failed to parse server headers.");
-            }
-            hdr = list_to_text(csp->headers);
-            if (hdr == NULL)
-            {
-               /* FIXME Should handle error properly */
-               log_error(LOG_LEVEL_FATAL, "Out of memory parsing server header");
-            }
-
-            if (crunch_response_triggered(csp, crunchers_light))
-            {
-               /*
-                * One of the tags created by a server-header
-                * tagger triggered a crunch. We already
-                * delivered the crunch response to the client
-                * and are done here after cleaning up.
-                */
-                freez(hdr);
-                mark_server_socket_tainted(csp);
-                return;
-            }
-            /* Buffer and pcrs filter this if appropriate. */
-
-            if (!http->ssl) /* We talk plaintext */
-            {
-               content_filter = get_filter_function(csp);
-            }
-            /*
-             * Only write if we're not buffering for content modification
-             */
-            if (!content_filter)
-            {
-               /*
-                * Write the server's (modified) header to
-                * the client (along with anything else that
-                * may be in the buffer)
-                */
-
-               if (write_socket(csp->cfd, hdr, strlen(hdr))
-                || ((len = flush_socket(csp->cfd, csp->iob)) < 0))
-               {
-                  log_error(LOG_LEVEL_CONNECT, "write header to client failed: %E");
-
-                  /*
-                   * The write failed, so don't bother mentioning it
-                   * to the client... it probably can't hear us anyway.
-                   */
-                  freez(hdr);
-                  mark_server_socket_tainted(csp);
-                  return;
-               }
-
-               byte_count += (unsigned long long)len;
-            }
-            else
-            {
-               /*
-                * XXX: the header lenght should probably
-                * be calculated by get_server_headers().
-                */
-               long header_length = csp->iob->cur - header_start;
-               assert(csp->iob->cur > header_start);
-               byte_count += (unsigned long long)(len - header_length);
-            }
-
-            /* we're finished with the server's header */
-
-            freez(hdr);
-            server_body = 1;
-
-            /*
-             * If this was a MS IIS/5 hack then it means the server
-             * has already closed the connection. Nothing more to read.
-             * Time to bail.
-             */
-            if (ms_iis5_hack)
-            {
-               log_error(LOG_LEVEL_INFO,
-                  "Closed server connection detected with MS IIS5 hack enabled.");
-               break;
-            }
-         }
-         continue;
-      }
-      mark_server_socket_tainted(csp);
-      return; /* huh? we should never get here */
-   }
-
-   if (csp->content_length == 0)
-   {
-      /*
-       * If Privoxy didn't recalculate the Content-Lenght,
-       * byte_count is still correct.
-       */
-      csp->content_length = byte_count;
-   }
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   if ((csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
-      && (csp->expected_content_length != byte_count))
-   {
-      log_error(LOG_LEVEL_CONNECT,
-         "Received %llu bytes while expecting %llu.",
-         byte_count, csp->expected_content_length);
-      mark_server_socket_tainted(csp);
-   }
-#endif
-
-   log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 200 %llu",
-      csp->ip_addr_str, http->ocmd, csp->content_length);
-}
-
-
-/*********************************************************************
- *
- * Function    :  serve
- *
- * Description :  This is little more than chat.  We only "serve" to
- *                to close any socket that chat may have opened.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-#ifdef AMIGA
-void serve(struct client_state *csp)
-#else /* ifndef AMIGA */
-static void serve(struct client_state *csp)
-#endif /* def AMIGA */
-{
-   chat(csp);
-   close_socket(csp->cfd);
-
-   if (csp->sfd != JB_INVALID_SOCKET)
-   {
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-      static int monitor_thread_running = 0;
-
-      if ((csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
-       && (csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE))
-      {
-         remember_connection(csp->sfd, csp->http, forward_url(csp, csp->http));
-         privoxy_mutex_lock(&connection_reuse_mutex);
-         if (!monitor_thread_running)
-         {
-            monitor_thread_running = 1;
-            privoxy_mutex_unlock(&connection_reuse_mutex);
-            wait_for_alive_connections();
-            privoxy_mutex_lock(&connection_reuse_mutex);
-            monitor_thread_running = 0;
-         }
-         privoxy_mutex_unlock(&connection_reuse_mutex);
-      }
-      else
-      {
-         forget_connection(csp->sfd);
-         close_socket(csp->sfd);
-      }
-#else
-      close_socket(csp->sfd);
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-   }
-
-   csp->flags &= ~CSP_FLAG_ACTIVE;
-
-}
-
-
-#ifdef __BEOS__
-/*********************************************************************
- *
- * Function    :  server_thread
- *
- * Description :  We only exist to call `serve' in a threaded environment.
- *
- * Parameters  :
- *          1  :  data = Current client state (buffers, headers, etc...)
- *
- * Returns     :  Always 0.
- *
- *********************************************************************/
-static int32 server_thread(void *data)
-{
-   serve((struct client_state *) data);
-   return 0;
-
-}
-#endif
-
-
-#if !defined(_WIN32) || defined(_WIN_CONSOLE)
-/*********************************************************************
- *
- * Function    :  usage
- *
- * Description :  Print usage info & exit.
- *
- * Parameters  :  Pointer to argv[0] for identifying ourselves
- *
- * Returns     :  No. ,-)
- *
- *********************************************************************/
-static void usage(const char *myname)
-{
-   printf("Privoxy version " VERSION " (" HOME_PAGE_URL ")\n"
-          "Usage: %s "
-#if defined(unix)
-          "[--chroot] "
-#endif /* defined(unix) */
-          "[--help] "
-#if defined(unix)
-          "[--no-daemon] [--pidfile pidfile] [--pre-chroot-nslookup hostname] [--user user[.group]] "
-#endif /* defined(unix) */
-          "[--version] [configfile]\n"
-          "Aborting\n", myname);
-
-   exit(2);
-
-}
-#endif /* #if !defined(_WIN32) || defined(_WIN_CONSOLE) */
-
-
-#ifdef MUTEX_LOCKS_AVAILABLE
-/*********************************************************************
- *
- * Function    :  privoxy_mutex_lock
- *
- * Description :  Locks a mutex.
- *
- * Parameters  :
- *          1  :  mutex = The mutex to lock.
- *
- * Returns     :  Void. May exit in case of errors.
- *
- *********************************************************************/
-void privoxy_mutex_lock(privoxy_mutex_t *mutex)
-{
-#ifdef FEATURE_PTHREAD
-   int err = pthread_mutex_lock(mutex);
-   if (err)
-   {
-      if (mutex != &log_mutex)
-      {
-         log_error(LOG_LEVEL_FATAL,
-            "Mutex locking failed: %s.\n", strerror(err));
-      }
-      exit(1);
-   }
-#else
-   EnterCriticalSection(mutex);
-#endif /* def FEATURE_PTHREAD */
-}
-
-
-/*********************************************************************
- *
- * Function    :  privoxy_mutex_unlock
- *
- * Description :  Unlocks a mutex.
- *
- * Parameters  :
- *          1  :  mutex = The mutex to unlock.
- *
- * Returns     :  Void. May exit in case of errors.
- *
- *********************************************************************/
-void privoxy_mutex_unlock(privoxy_mutex_t *mutex)
-{
-#ifdef FEATURE_PTHREAD
-   int err = pthread_mutex_unlock(mutex);
-   if (err)
-   {
-      if (mutex != &log_mutex)
-      {
-         log_error(LOG_LEVEL_FATAL,
-            "Mutex unlocking failed: %s.\n", strerror(err));
-      }
-      exit(1);
-   }
-#else
-   LeaveCriticalSection(mutex);
-#endif /* def FEATURE_PTHREAD */
-}
-
-
-/*********************************************************************
- *
- * Function    :  privoxy_mutex_init
- *
- * Description :  Prepares a mutex.
- *
- * Parameters  :
- *          1  :  mutex = The mutex to initialize.
- *
- * Returns     :  Void. May exit in case of errors.
- *
- *********************************************************************/
-static void privoxy_mutex_init(privoxy_mutex_t *mutex)
-{
-#ifdef FEATURE_PTHREAD
-   int err = pthread_mutex_init(mutex, 0);
-   if (err)
-   {
-      printf("Fatal error. Mutex initialization failed: %s.\n",
-         strerror(err));
-      exit(1);
-   }
-#else
-   InitializeCriticalSection(mutex);
-#endif /* def FEATURE_PTHREAD */
-}
-#endif /* def MUTEX_LOCKS_AVAILABLE */
-
-/*********************************************************************
- *
- * Function    :  initialize_mutexes
- *
- * Description :  Prepares mutexes if mutex support is available.
- *
- * Parameters  :  None
- *
- * Returns     :  Void, exits in case of errors.
- *
- *********************************************************************/
-static void initialize_mutexes(void)
-{
-#ifdef MUTEX_LOCKS_AVAILABLE
-   /*
-    * Prepare global mutex semaphores
-    */
-   privoxy_mutex_init(&log_mutex);
-   privoxy_mutex_init(&log_init_mutex);
-   privoxy_mutex_init(&connection_reuse_mutex);
-
-   /*
-    * XXX: The assumptions below are a bit naive
-    * and can cause locks that aren't necessary.
-    *
-    * For example older FreeBSD versions (< 6.x?)
-    * have no gethostbyname_r, but gethostbyname is
-    * thread safe.
-    */
-#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R)
-   privoxy_mutex_init(&resolver_mutex);
-#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */
-   /*
-    * XXX: should we use a single mutex for
-    * localtime() and gmtime() as well?
-    */
-#ifndef HAVE_GMTIME_R
-   privoxy_mutex_init(&gmtime_mutex);
-#endif /* ndef HAVE_GMTIME_R */
-
-#ifndef HAVE_LOCALTIME_R
-   privoxy_mutex_init(&localtime_mutex);
-#endif /* ndef HAVE_GMTIME_R */
-
-#ifndef HAVE_RANDOM
-   privoxy_mutex_init(&rand_mutex);
-#endif /* ndef HAVE_RANDOM */
-#endif /* def MUTEX_LOCKS_AVAILABLE */
-}
-
-
-/*********************************************************************
- *
- * Function    :  main
- *
- * Description :  Load the config file and start the listen loop.
- *                This function is a lot more *sane* with the `load_config'
- *                and `listen_loop' functions; although it stills does
- *                a *little* too much for my taste.
- *
- * Parameters  :
- *          1  :  argc = Number of parameters (including $0).
- *          2  :  argv = Array of (char *)'s to the parameters.
- *
- * Returns     :  1 if : can't open config file, unrecognized directive,
- *                stats requested in multi-thread mode, can't open the
- *                log file, can't open the jar file, listen port is invalid,
- *                any load fails, and can't bind port.
- *
- *                Else main never returns, the process must be signaled
- *                to terminate execution.  Or, on Windows, use the
- *                "File", "Exit" menu option.
- *
- *********************************************************************/
-#ifdef __MINGW32__
-int real_main(int argc, const char *argv[])
-#else
-int main(int argc, const char *argv[])
-#endif
-{
-   int argc_pos = 0;
-   unsigned int random_seed;
-#ifdef unix
-   struct passwd *pw = NULL;
-   struct group *grp = NULL;
-   char *p;
-   int do_chroot = 0;
-   char *pre_chroot_nslookup_to_load_resolver = NULL;
-#endif
-
-   Argc = argc;
-   Argv = argv;
-
-   configfile =
-#if !defined(_WIN32)
-   "config"
-#else
-   "config.txt"
-#endif
-      ;
-
-   /* Prepare mutexes if supported and necessary. */
-   initialize_mutexes();
-
-   /* Enable logging until further notice. */
-   init_log_module();
-
-   /*
-    * Parse the command line arguments
-    *
-    * XXX: simply printing usage information in case of
-    * invalid arguments isn't particularly user friendly.
-    */
-   while (++argc_pos < argc)
-   {
-#ifdef _WIN32
-      /* Check to see if the service must be installed or uninstalled */
-      if (strncmp(argv[argc_pos], "--install", 9) == 0)
-      {
-         const char *pName = argv[argc_pos] + 9;
-         if (*pName == ':')
-            pName++;
-         exit( (install_service(pName)) ? 0 : 1 );
-      }
-      else if (strncmp(argv[argc_pos], "--uninstall", + 11) == 0)
-      {
-         const char *pName = argv[argc_pos] + 11;
-         if (*pName == ':')
-            pName++;
-         exit((uninstall_service(pName)) ? 0 : 1);
-      }
-      else if (strcmp(argv[argc_pos], "--service" ) == 0)
-      {
-         bRunAsService = TRUE;
-         w32_set_service_cwd();
-         atexit(w32_service_exit_notify);
-      }
-      else
-#endif /* defined(_WIN32) */
-
-
-#if !defined(_WIN32) || defined(_WIN_CONSOLE)
-
-      if (strcmp(argv[argc_pos], "--help") == 0)
-      {
-         usage(argv[0]);
-      }
-
-      else if(strcmp(argv[argc_pos], "--version") == 0)
-      {
-         printf("Privoxy version " VERSION " (" HOME_PAGE_URL ")\n");
-         exit(0);
-      }
-
-#if defined(unix)
-
-      else if (strcmp(argv[argc_pos], "--no-daemon" ) == 0)
-      {
-         set_debug_level(LOG_LEVEL_FATAL | LOG_LEVEL_ERROR | LOG_LEVEL_INFO);
-         no_daemon = 1;
-      }
-
-      else if (strcmp(argv[argc_pos], "--pidfile" ) == 0)
-      {
-         if (++argc_pos == argc) usage(argv[0]);
-         pidfile = strdup(argv[argc_pos]);
-      }
-
-      else if (strcmp(argv[argc_pos], "--user" ) == 0)
-      {
-         if (++argc_pos == argc) usage(argv[argc_pos]);
-
-         if ((NULL != (p = strchr(argv[argc_pos], '.'))) && *(p + 1) != '0')
-         {
-            *p++ = '\0';
-            if (NULL == (grp = getgrnam(p)))
-            {
-               log_error(LOG_LEVEL_FATAL, "Group %s not found.", p);
-            }
-         }
-
-         if (NULL == (pw = getpwnam(argv[argc_pos])))
-         {
-            log_error(LOG_LEVEL_FATAL, "User %s not found.", argv[argc_pos]);
-         }
-
-         if (p != NULL) *--p = '\0';
-      }
-
-      else if (strcmp(argv[argc_pos], "--pre-chroot-nslookup" ) == 0)
-      {
-         if (++argc_pos == argc) usage(argv[0]);
-         pre_chroot_nslookup_to_load_resolver = strdup(argv[argc_pos]);
-      }
-
-      else if (strcmp(argv[argc_pos], "--chroot" ) == 0)
-      {
-         do_chroot = 1;
-      }
-#endif /* defined(unix) */
-
-      else if (argc_pos + 1 != argc)
-      {
-         /*
-          * This is neither the last command line
-          * option, nor was it recognized before,
-          * therefore it must be invalid.
-          */
-         usage(argv[0]);
-      }
-      else
-
-#endif /* defined(_WIN32) && !defined(_WIN_CONSOLE) */
-      {
-         configfile = argv[argc_pos];
-      }
-
-   } /* -END- while (more arguments) */
-
-   show_version(Argv[0]);
-
-#if defined(unix)
-   if ( *configfile != '/' )
-   {
-      char cwd[BUFFER_SIZE];
-      char *abs_file;
-      size_t abs_file_size; 
-
-      /* make config-filename absolute here */
-      if (NULL == getcwd(cwd, sizeof(cwd)))
-      {
-         perror("failed to get current working directory");
-         exit( 1 );
-      }
-
-      /* XXX: why + 5? */
-      abs_file_size = strlen(cwd) + strlen(configfile) + 5;
-      basedir = strdup(cwd);
-
-      if (NULL == basedir ||
-          NULL == (abs_file = malloc(abs_file_size)))
-      {
-         perror("malloc failed");
-         exit( 1 );
-      }
-      strlcpy(abs_file, basedir, abs_file_size);
-      strlcat(abs_file, "/", abs_file_size );
-      strlcat(abs_file, configfile, abs_file_size);
-      configfile = abs_file;
-   }
-#endif /* defined unix */
-
-
-   files->next = NULL;
-   clients->next = NULL;
-
-   /* XXX: factor out initialising after the next stable release. */
-#ifdef AMIGA
-   InitAmiga();
-#elif defined(_WIN32)
-   InitWin32();
-#endif
-
-   random_seed = (unsigned int)time(NULL);
-#ifdef HAVE_RANDOM
-   srandom(random_seed);
-#else
-   srand(random_seed);
-#endif /* ifdef HAVE_RANDOM */
-
-   /*
-    * Unix signal handling
-    *
-    * Catch the abort, interrupt and terminate signals for a graceful exit
-    * Catch the hangup signal so the errlog can be reopened.
-    * Ignore the broken pipe signals (FIXME: Why?)
-    */
-#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA)
-{
-   int idx;
-   const int catched_signals[] = { SIGTERM, SIGINT, SIGHUP, 0 };
-   const int ignored_signals[] = { SIGPIPE, 0 };
-
-   for (idx = 0; catched_signals[idx] != 0; idx++)
-   {
-#ifdef sun /* FIXME: Is it safe to check for HAVE_SIGSET instead? */ 
-      if (sigset(catched_signals[idx], sig_handler) == SIG_ERR)
-#else
-      if (signal(catched_signals[idx], sig_handler) == SIG_ERR)
-#endif /* ifdef sun */
-      {
-         log_error(LOG_LEVEL_FATAL, "Can't set signal-handler for signal %d: %E", catched_signals[idx]);
-      }
-   }
-
-   for (idx = 0; ignored_signals[idx] != 0; idx++)
-   {
-      if (signal(ignored_signals[idx], SIG_IGN) == SIG_ERR)
-      {
-         log_error(LOG_LEVEL_FATAL, "Can't set ignore-handler for signal %d: %E", ignored_signals[idx]);
-      }
-   }
-
-}
-#else /* ifdef _WIN32 */
-# ifdef _WIN_CONSOLE
-   /*
-    * We *are* in a windows console app.
-    * Print a verbose messages about FAQ's and such
-    */
-   printf("%s", win32_blurb);
-# endif /* def _WIN_CONSOLE */
-#endif /* def _WIN32 */
-
-
-   /* Initialize the CGI subsystem */
-   cgi_init_error_messages();
-
-   /*
-    * If runnig on unix and without the --nodaemon
-    * option, become a daemon. I.e. fork, detach
-    * from tty and get process group leadership
-    */
-#if defined(unix)
-{
-   pid_t pid = 0;
-#if 0
-   int   fd;
-#endif
-
-   if (!no_daemon)
-   {
-      pid  = fork();
-
-      if ( pid < 0 ) /* error */
-      {
-         perror("fork");
-         exit( 3 );
-      }
-      else if ( pid != 0 ) /* parent */
-      {
-         int status;
-         pid_t wpid;
-         /*
-          * must check for errors
-          * child died due to missing files aso
-          */
-         sleep( 1 );
-         wpid = waitpid( pid, &status, WNOHANG );
-         if ( wpid != 0 )
-         {
-            exit( 1 );
-         }
-         exit( 0 );
-      }
-      /* child */
-#if 1
-      /* Should be more portable, but not as well tested */
-      setsid();
-#else /* !1 */
-#ifdef __FreeBSD__
-      setpgrp(0,0);
-#else /* ndef __FreeBSD__ */
-      setpgrp();
-#endif /* ndef __FreeBSD__ */
-      fd = open("/dev/tty", O_RDONLY);
-      if ( fd )
-      {
-         /* no error check here */
-         ioctl( fd, TIOCNOTTY,0 );
-         close ( fd );
-      }
-#endif /* 1 */
-      /*
-       * stderr (fd 2) will be closed later on,
-       * when the config file has been parsed.
-       */
-
-      close( 0 );
-      close( 1 );
-      chdir("/");
-
-   } /* -END- if (!no_daemon) */
-
-   /*
-    * As soon as we have written the PID file, we can switch
-    * to the user and group ID indicated by the --user option
-    */
-   write_pid_file();
-
-   if (NULL != pw)
-   {
-      if (setgid((NULL != grp) ? grp->gr_gid : pw->pw_gid))
-      {
-         log_error(LOG_LEVEL_FATAL, "Cannot setgid(): Insufficient permissions.");
-      }
-      if (NULL != grp)
-      {
-         if (setgroups(1, &grp->gr_gid))
-         {
-            log_error(LOG_LEVEL_FATAL, "setgroups() failed: %E");
-         }
-      }
-      else if (initgroups(pw->pw_name, pw->pw_gid))
-      {
-         log_error(LOG_LEVEL_FATAL, "initgroups() failed: %E");
-      }
-      if (do_chroot)
-      {
-         if (!pw->pw_dir)
-         {
-            log_error(LOG_LEVEL_FATAL, "Home directory for %s undefined", pw->pw_name);
-         }
-         /* Read the time zone file from /etc before doing chroot. */
-         tzset();
-         if (NULL != pre_chroot_nslookup_to_load_resolver
-             && '\0' != pre_chroot_nslookup_to_load_resolver[0])
-         {
-            /* Initialize resolver library. */
-            (void) resolve_hostname_to_ip(pre_chroot_nslookup_to_load_resolver);
-         }
-         if (chroot(pw->pw_dir) < 0)
-         {
-            log_error(LOG_LEVEL_FATAL, "Cannot chroot to %s", pw->pw_dir);
-         }
-         if (chdir ("/"))
-         {
-            log_error(LOG_LEVEL_FATAL, "Cannot chdir /");
-         }
-      }
-      if (setuid(pw->pw_uid))
-      {
-         log_error(LOG_LEVEL_FATAL, "Cannot setuid(): Insufficient permissions.");
-      }
-      if (do_chroot)
-      {
-         char putenv_dummy[64];
-
-         strlcpy(putenv_dummy, "HOME=/", sizeof(putenv_dummy));
-         if (putenv(putenv_dummy) != 0)
-         {
-            log_error(LOG_LEVEL_FATAL, "Cannot putenv(): HOME");
-         }                
-
-         snprintf(putenv_dummy, sizeof(putenv_dummy), "USER=%s", pw->pw_name);
-         if (putenv(putenv_dummy) != 0)
-         {
-            log_error(LOG_LEVEL_FATAL, "Cannot putenv(): USER");
-         }
-      }
-   }
-   else if (do_chroot)
-   {
-      log_error(LOG_LEVEL_FATAL, "Cannot chroot without --user argument.");
-   }
-}
-#endif /* defined unix */
-
-#ifdef _WIN32
-   /* This will be FALSE unless the command line specified --service
-    */
-   if (bRunAsService)
-   {
-      /* Yup, so now we must attempt to establish a connection 
-       * with the service dispatcher. This will only work if this
-       * process was launched by the service control manager to
-       * actually run as a service. If this isn't the case, i've
-       * known it take around 30 seconds or so for the call to return.
-       */
-
-      /* The StartServiceCtrlDispatcher won't return until the service is stopping */
-      if (w32_start_service_ctrl_dispatcher(w32ServiceDispatchTable))
-      {
-         /* Service has run, and at this point is now being stopped, so just return */
-         return 0;
-      }
-
-#ifdef _WIN_CONSOLE
-      printf("Warning: Failed to connect to Service Control Dispatcher\nwhen starting as a service!\n");
-#endif
-      /* An error occurred. Usually it's because --service was wrongly specified
-       * and we were unable to connect to the Service Control Dispatcher because
-       * it wasn't expecting us and is therefore not listening.
-       *
-       * For now, just continue below to call the listen_loop function.
-       */
-   }
-#endif /* def _WIN32 */
-
-   listen_loop();
-
-   /* NOTREACHED */
-   return(-1);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  bind_port_helper
- *
- * Description :  Bind the listen port.  Handles logging, and aborts
- *                on failure.
- *
- * Parameters  :
- *          1  :  config = Privoxy configuration.  Specifies port
- *                         to bind to.
- *
- * Returns     :  Port that was opened.
- *
- *********************************************************************/
-static jb_socket bind_port_helper(struct configuration_spec * config)
-{
-   int result;
-   jb_socket bfd;
-
-   if (config->haddr == NULL)
-   {
-      log_error(LOG_LEVEL_INFO, "Listening on port %d on all IP addresses",
-                config->hport);
-   }
-   else
-   {
-      log_error(LOG_LEVEL_INFO, "Listening on port %d on IP address %s",
-                config->hport, config->haddr);
-   }
-
-   result = bind_port(config->haddr, config->hport, &bfd);
-
-   if (result < 0)
-   {
-      switch(result)
-      {
-         case -3 :
-            log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: "
-               "There may be another Privoxy or some other "
-               "proxy running on port %d",
-               (NULL != config->haddr) ? config->haddr : "INADDR_ANY",
-                      config->hport, config->hport);
-
-         case -2 :
-            log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: " 
-               "The hostname is not resolvable",
-               (NULL != config->haddr) ? config->haddr : "INADDR_ANY", config->hport);
-
-         default :
-            log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: because %E",
-               (NULL != config->haddr) ? config->haddr : "INADDR_ANY", config->hport);
-      }
-
-      /* shouldn't get here */
-      return JB_INVALID_SOCKET;
-   }
-
-   config->need_bind = 0;
-
-   return bfd;
-}
-
-
-#ifdef _WIN32
-/* Without this simple workaround we get this compiler warning from _beginthread
- *     warning C4028: formal parameter 1 different from declaration
- */
-void w32_service_listen_loop(void *p)
-{
-   listen_loop();
-}
-#endif /* def _WIN32 */
-
-
-/*********************************************************************
- *
- * Function    :  listen_loop
- *
- * Description :  bind the listen port and enter a "FOREVER" listening loop.
- *
- * Parameters  :  N/A
- *
- * Returns     :  Never.
- *
- *********************************************************************/
-static void listen_loop(void)
-{
-   struct client_state *csp = NULL;
-   jb_socket bfd;
-   struct configuration_spec * config;
-
-   config = load_config();
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   /*
-    * XXX: Should be relocated once it no
-    * longer needs to emit log messages.
-    */
-   initialize_reusable_connections();
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-   bfd = bind_port_helper(config);
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-   while (!g_terminate)
-#else
-   for (;;)
-#endif
-   {
-#if !defined(FEATURE_PTHREAD) && !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) && !defined(__OS2__)
-      while (waitpid(-1, NULL, WNOHANG) > 0)
-      {
-         /* zombie children */
-      }
-#endif /* !defined(FEATURE_PTHREAD) && !defined(_WIN32) && !defined(__BEOS__) && !defined(AMIGA) */
-
-      /*
-       * Free data that was used by died threads
-       */
-      sweep();
-
-#if defined(unix)
-      /*
-       * Re-open the errlog after HUP signal
-       */
-      if (received_hup_signal)
-      {
-         if (NULL != config->logfile)
-         {
-            init_error_log(Argv[0], config->logfile);
-         }
-         received_hup_signal = 0;
-      }
-#endif
-
-      if ( NULL == (csp = (struct client_state *) zalloc(sizeof(*csp))) )
-      {
-         log_error(LOG_LEVEL_FATAL, "malloc(%d) for csp failed: %E", sizeof(*csp));
-         continue;
-      }
-
-      csp->flags |= CSP_FLAG_ACTIVE;
-      csp->sfd    = JB_INVALID_SOCKET;
-
-      csp->config = config = load_config();
-
-      if ( config->need_bind )
-      {
-         /*
-          * Since we were listening to the "old port", we will not see
-          * a "listen" param change until the next IJB request.  So, at
-          * least 1 more request must be made for us to find the new
-          * setting.  I am simply closing the old socket and binding the
-          * new one.
-          *
-          * Which-ever is correct, we will serve 1 more page via the
-          * old settings.  This should probably be a "show-proxy-args"
-          * request.  This should not be a so common of an operation
-          * that this will hurt people's feelings.
-          */
-
-         close_socket(bfd);
-
-         bfd = bind_port_helper(config);
-      }
-
-      log_error(LOG_LEVEL_CONNECT, "Listening for new connections ... ");
-
-      if (!accept_connection(csp, bfd))
-      {
-         log_error(LOG_LEVEL_CONNECT, "accept failed: %E");
-
-#ifdef AMIGA
-         if(!childs)
-         {
-            exit(1);
-         }
-#endif
-         freez(csp);
-         continue;
-      }
-      else
-      {
-         log_error(LOG_LEVEL_CONNECT, "accepted connection from %s", csp->ip_addr_str);
-      }
-
-#ifdef FEATURE_TOGGLE
-      if (global_toggle_state)
-#endif /* def FEATURE_TOGGLE */
-      {
-         csp->flags |= CSP_FLAG_TOGGLED_ON;
-      }
-
-      if (run_loader(csp))
-      {
-         log_error(LOG_LEVEL_FATAL, "a loader failed - must exit");
-         /* Never get here - LOG_LEVEL_FATAL causes program exit */
-      }
-
-#ifdef FEATURE_ACL
-      if (block_acl(NULL,csp))
-      {
-         log_error(LOG_LEVEL_CONNECT, "Connection from %s dropped due to ACL", csp->ip_addr_str);
-         close_socket(csp->cfd);
-         freez(csp);
-         continue;
-      }
-#endif /* def FEATURE_ACL */
-
-      /* add it to the list of clients */
-      csp->next = clients->next;
-      clients->next = csp;
-
-      if (config->multi_threaded)
-      {
-         int child_id;
-
-/* this is a switch () statment in the C preprocessor - ugh */
-#undef SELECTED_ONE_OPTION
-
-/* Use Pthreads in preference to native code */
-#if defined(FEATURE_PTHREAD) && !defined(SELECTED_ONE_OPTION)
-#define SELECTED_ONE_OPTION
-         {
-            pthread_t the_thread;
-            pthread_attr_t attrs;
-
-            pthread_attr_init(&attrs);
-            pthread_attr_setdetachstate(&attrs, PTHREAD_CREATE_DETACHED);
-            errno = pthread_create(&the_thread, &attrs,
-               (void * (*)(void *))serve, csp);
-            child_id = errno ? -1 : 0;
-            pthread_attr_destroy(&attrs);
-         }
-#endif
-
-#if defined(_WIN32) && !defined(_CYGWIN) && !defined(SELECTED_ONE_OPTION)
-#define SELECTED_ONE_OPTION
-         child_id = _beginthread(
-            (void (*)(void *))serve,
-            64 * 1024,
-            csp);
-#endif
-
-#if defined(__OS2__) && !defined(SELECTED_ONE_OPTION)
-#define SELECTED_ONE_OPTION
-         child_id = _beginthread(
-            (void(* _Optlink)(void*))serve,
-            NULL,
-            64 * 1024,
-            csp);
-#endif
-
-#if defined(__BEOS__) && !defined(SELECTED_ONE_OPTION)
-#define SELECTED_ONE_OPTION
-         {
-            thread_id tid = spawn_thread
-               (server_thread, "server", B_NORMAL_PRIORITY, csp);
-
-            if ((tid >= 0) && (resume_thread(tid) == B_OK))
-            {
-               child_id = (int) tid;
-            }
-            else
-            {
-               child_id = -1;
-            }
-         }
-#endif
-
-#if defined(AMIGA) && !defined(SELECTED_ONE_OPTION)
-#define SELECTED_ONE_OPTION
-         csp->cfd = ReleaseSocket(csp->cfd, -1);
-         
-#ifdef __amigaos4__
-         child_id = (int)CreateNewProcTags(NP_Entry, (ULONG)server_thread,
-                                           NP_Output, Output(),
-                                           NP_CloseOutput, FALSE,
-                                           NP_Name, (ULONG)"privoxy child",
-                                           NP_Child, TRUE,
-                                           TAG_DONE);
-#else
-         child_id = (int)CreateNewProcTags(NP_Entry, (ULONG)server_thread,
-                                           NP_Output, Output(),
-                                           NP_CloseOutput, FALSE,
-                                           NP_Name, (ULONG)"privoxy child",
-                                           NP_StackSize, 200*1024,
-                                           TAG_DONE);
-#endif
-         if(0 != child_id)
-         {
-            childs++;
-            ((struct Task *)child_id)->tc_UserData = csp;
-            Signal((struct Task *)child_id, SIGF_SINGLE);
-            Wait(SIGF_SINGLE);
-         }
-#endif
-
-#if !defined(SELECTED_ONE_OPTION)
-         child_id = fork();
-
-         /* This block is only needed when using fork().
-          * When using threads, the server thread was
-          * created and run by the call to _beginthread().
-          */
-         if (child_id == 0)   /* child */
-         {
-            int rc = 0;
-#ifdef FEATURE_TOGGLE
-            int inherited_toggle_state = global_toggle_state;
-#endif /* def FEATURE_TOGGLE */
-
-            serve(csp);
-
-            /* 
-             * If we've been toggled or we've blocked the request, tell Mom
-             */
-
-#ifdef FEATURE_TOGGLE
-            if (inherited_toggle_state != global_toggle_state)
-            {
-               rc |= RC_FLAG_TOGGLED;
-            }
-#endif /* def FEATURE_TOGGLE */
-
-#ifdef FEATURE_STATISTICS  
-            if (csp->flags & CSP_FLAG_REJECTED)
-            {
-               rc |= RC_FLAG_BLOCKED;
-            }
-#endif /* ndef FEATURE_STATISTICS */
-
-            _exit(rc);
-         }
-         else if (child_id > 0) /* parent */
-         {
-            /* in a fork()'d environment, the parent's
-             * copy of the client socket and the CSP
-             * are not used.
-             */
-            int child_status;
-#if !defined(_WIN32) && !defined(__CYGWIN__)
-
-            wait( &child_status );
-
-            /* 
-             * Evaluate child's return code: If the child has
-             *  - been toggled, toggle ourselves
-             *  - blocked its request, bump up the stats counter
-             */
-
-#ifdef FEATURE_TOGGLE
-            if (WIFEXITED(child_status) && (WEXITSTATUS(child_status) & RC_FLAG_TOGGLED))
-            {
-               global_toggle_state = !global_toggle_state;
-            }
-#endif /* def FEATURE_TOGGLE */
-
-#ifdef FEATURE_STATISTICS
-            urls_read++;
-            if (WIFEXITED(child_status) && (WEXITSTATUS(child_status) & RC_FLAG_BLOCKED))
-            {
-               urls_rejected++;
-            }
-#endif /* def FEATURE_STATISTICS */ 
-
-#endif /* !defined(_WIN32) && defined(__CYGWIN__) */
-            close_socket(csp->cfd);
-            csp->flags &= ~CSP_FLAG_ACTIVE;
-         }
-#endif
-
-#undef SELECTED_ONE_OPTION
-/* end of cpp switch () */
-
-         if (child_id < 0) /* failed */
-         {
-            char buf[BUFFER_SIZE];
-
-            log_error(LOG_LEVEL_ERROR, "can't fork: %E");
-
-            snprintf(buf , sizeof(buf), "Privoxy: can't fork: errno = %d", errno);
-
-            write_socket(csp->cfd, buf, strlen(buf));
-            close_socket(csp->cfd);
-            csp->flags &= ~CSP_FLAG_ACTIVE;
-            sleep(5);
-            continue;
-         }
-      }
-      else
-      {
-         serve(csp);
-      }
-   }
-
-   /* NOTREACHED unless FEATURE_GRACEFUL_TERMINATION is defined */
-
-   /* Clean up.  Aim: free all memory (no leaks) */
-#ifdef FEATURE_GRACEFUL_TERMINATION
-
-   log_error(LOG_LEVEL_ERROR, "Graceful termination requested");
-
-   unload_current_config_file();
-   unload_current_actions_file();
-   unload_current_re_filterfile();
-#ifdef FEATURE_TRUST
-   unload_current_trust_file();
-#endif
-
-   if (config->multi_threaded)
-   {
-      int i = 60;
-      do
-      {
-         sleep(1);
-         sweep();
-      } while ((clients->next != NULL) && (--i > 0));
-
-      if (i <= 0)
-      {
-         log_error(LOG_LEVEL_ERROR, "Graceful termination failed - still some live clients after 1 minute wait.");
-      }
-   }
-   sweep();
-   sweep();
-
-#if defined(unix)
-   freez(basedir);
-#endif
-   freez(configfile);
-
-#if defined(_WIN32) && !defined(_WIN_CONSOLE)
-   /* Cleanup - remove taskbar icon etc. */
-   TermLogWindow();
-#endif
-
-   exit(0);
-#endif /* FEATURE_GRACEFUL_TERMINATION */
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/jcc.c.rej b/external/privoxy/jcc.c.rej
deleted file mode 100644
index 7a1bbdc..0000000
--- a/external/privoxy/jcc.c.rej
+++ /dev/null
@@ -1,20 +0,0 @@
-***************
-*** 3110,3118 ****
-           }
-           continue;
-        }
--       log_error(LOG_LEVEL_INFO,
--          "Shouldn't get here but did.");
--       return;
-     }
-  
-     if (csp->content_length == 0)
---- 3120,3127 ----
-           }
-           continue;
-        }
-+       mark_server_socket_tainted(csp);
-+       return; /* huh? we should never get here */
-     }
-  
-     if (csp->content_length == 0)
diff --git a/external/privoxy/jcc.h b/external/privoxy/jcc.h
deleted file mode 100644
index add854c..0000000
--- a/external/privoxy/jcc.h
+++ /dev/null
@@ -1,261 +0,0 @@
-#ifndef JCC_H_INCLUDED
-#define JCC_H_INCLUDED
-#define JCC_H_VERSION "$Id: jcc.h,v 1.25 2008/10/09 18:21:41 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/jcc.h,v $
- *
- * Purpose     :  Main file.  Contains main() method, main loop, and 
- *                the main connection-handling function.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2006 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: jcc.h,v $
- *    Revision 1.25  2008/10/09 18:21:41  fabiankeil
- *    Flush work-in-progress changes to keep outgoing connections
- *    alive where possible. Incomplete and mostly #ifdef'd out.
- *
- *    Revision 1.24  2008/09/07 12:35:05  fabiankeil
- *    Add mutex lock support for _WIN32.
- *
- *    Revision 1.23  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.22  2007/06/01 18:16:36  fabiankeil
- *    Use the same mutex for gethostbyname() and gethostbyaddr() to prevent
- *    deadlocks and crashes on OpenBSD and possibly other OS with neither
- *    gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174.
- *    Thanks to Ralf Horstmann for report and solution.
- *
- *    Revision 1.21  2007/04/22 13:18:06  fabiankeil
- *    Keep the HTTP snippets local.
- *
- *    Revision 1.20  2006/12/26 17:31:41  fabiankeil
- *    Mutex protect rand() if POSIX threading
- *    is used, warn the user if that's not possible
- *    and stop using it on _WIN32 where it could
- *    cause crashes.
- *
- *    Revision 1.19  2006/12/06 19:41:39  fabiankeil
- *    Privoxy is now able to run as intercepting
- *    proxy in combination with any packet filter
- *    that does the port redirection. The destination
- *    is extracted from the "Host:" header which
- *    should be available for nearly all requests.
- *
- *    Moved HTTP snipplets into jcc.c.
- *    Added error message for gopher proxy requests.
- *
- *    Revision 1.18  2006/11/13 19:05:51  fabiankeil
- *    Make pthread mutex locking more generic. Instead of
- *    checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- *    and use mutex locking unless there is an _r function
- *    available. Better safe than sorry.
- *
- *    Fixes "./configure --disable-pthread" and should result
- *    in less threading-related problems on pthread-using platforms,
- *    but it still doesn't fix BR#1122404.
- *
- *    Revision 1.17  2006/11/06 19:58:23  fabiankeil
- *    Move pthread.h inclusion from jcc.c to jcc.h.
- *    Fixes build on x86-freebsd1 (FreeBSD 5.4-RELEASE).
- *
- *    Revision 1.16  2006/09/02 15:36:42  fabiankeil
- *    Follow the OpenBSD port's lead and protect the resolve
- *    functions on OpenBSD as well.
- *
- *    Revision 1.15  2006/09/02 10:24:30  fabiankeil
- *    Include pthread.h for OpenBSD to make Privoxy build again.
- *
- *    Tested shortly on OpenBSD 3.9 without problems, but the OpenBSD
- *    port has additional patches to use the mutexes OSX_DARWIN needs,
- *    and it should be investigated if they are still required for
- *    reliable operation.
- *
- *    Revision 1.14  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.12.2.3  2006/01/21 16:16:08  david__schmidt
- *    Thanks to  Edward Carrel for his patch to modernize OSX'spthreads support.  See bug #1409623.
- *
- *    Revision 1.12.2.2  2005/04/03 20:10:50  david__schmidt
- *    Thanks to Jindrich Makovicka for a race condition fix for the log
- *    file.  The race condition remains for non-pthread implementations.
- *    Reference patch #1175720.
- *
- *    Revision 1.12.2.1  2003/03/07 03:41:05  david__schmidt
- *    Wrapping all *_r functions (the non-_r versions of them) with mutex 
- *    semaphores for OSX.  Hopefully this will take care of all of those pesky
- *    crash reports.
- *
- *    Revision 1.12  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.11  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.10  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.9  2002/03/07 03:52:44  oes
- *    Set logging to tty for --no-daemon mode
- *
- *    Revision 1.8  2002/03/04 18:19:49  oes
- *    Added extern const char *pidfile
- *
- *    Revision 1.7  2001/11/05 21:41:43  steudten
- *    Add changes to be a real daemon just for unix os.
- *    (change cwd to /, detach from controlling tty, set
- *    process group and session leader to the own process.
- *    Add DBG() Macro.
- *    Add some fatal-error log message for failed malloc().
- *    Add '-d' if compiled with 'configure --with-debug' to
- *    enable debug output.
- *
- *    Revision 1.6  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.5  2001/07/29 19:32:00  jongfoster
- *    Renaming _main() [mingw32 only] to real_main(), for ANSI compliance.
- *
- *    Revision 1.4  2001/07/29 18:58:15  jongfoster
- *    Removing nested #includes, adding forward declarations for needed
- *    structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED.
- *
- *    Revision 1.3  2001/07/18 12:31:58  oes
- *    moved #define freez from jcc.h to project.h
- *
- *    Revision 1.2  2001/05/31 21:24:47  jongfoster
- *    Changed "permission" to "action" throughout.
- *    Removed DEFAULT_USER_AGENT - it must now be specified manually.
- *    Moved vanilla wafer check into chat(), since we must now
- *    decide whether or not to add it based on the URL.
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:56  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct client_state;
-struct file_list;
-
-/* Global variables */
-
-#ifdef FEATURE_STATISTICS
-extern int urls_read;
-extern int urls_rejected;
-#endif /*def FEATURE_STATISTICS*/
-
-extern struct client_state clients[1];
-extern struct file_list    files[1];
-
-#ifdef unix
-extern const char *pidfile;
-#endif
-extern int no_daemon;
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-extern int g_terminate;
-#endif
-
-#if defined(FEATURE_PTHREAD) || defined(_WIN32)
-#define MUTEX_LOCKS_AVAILABLE
-
-#ifdef FEATURE_PTHREAD
-#include <pthread.h>
-
-typedef pthread_mutex_t privoxy_mutex_t;
-
-#else
-
-typedef CRITICAL_SECTION privoxy_mutex_t;
-
-#endif
-
-extern void privoxy_mutex_lock(privoxy_mutex_t *mutex);
-extern void privoxy_mutex_unlock(privoxy_mutex_t *mutex);
-
-extern privoxy_mutex_t log_mutex;
-extern privoxy_mutex_t log_init_mutex;
-extern privoxy_mutex_t connection_reuse_mutex;
-
-#ifndef HAVE_GMTIME_R
-extern privoxy_mutex_t gmtime_mutex;
-#endif /* ndef HAVE_GMTIME_R */
-
-#ifndef HAVE_LOCALTIME_R
-extern privoxy_mutex_t localtime_mutex;
-#endif /* ndef HAVE_GMTIME_R */
-
-#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R)
-extern privoxy_mutex_t resolver_mutex;
-#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */
-
-#ifndef HAVE_RANDOM
-extern privoxy_mutex_t rand_mutex;
-#endif /* ndef HAVE_RANDOM */
-
-#endif /* FEATURE_PTHREAD */
-
-/* Functions */
-
-#ifdef __MINGW32__
-int real_main(int argc, const char *argv[]);
-#else
-int main(int argc, const char *argv[]);
-#endif
-
-/* Revision control strings from this header and associated .c file */
-extern const char jcc_rcs[];
-extern const char jcc_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef JCC_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/list.c b/external/privoxy/list.c
deleted file mode 100644
index c158129..0000000
--- a/external/privoxy/list.c
+++ /dev/null
@@ -1,1229 +0,0 @@
-const char list_rcs[] = "$Id: list.c,v 1.20 2007/05/14 16:56:07 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/list.c,v $
- *
- * Purpose     :  Declares functions to handle lists.
- *                Functions declared include:
- *                   `destroy_list', `enlist' and `list_to_text'
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: list.c,v $
- *    Revision 1.20  2007/05/14 16:56:07  fabiankeil
- *    - Stop using strcpy().
- *    - enlist_unique_header() now behaves as advertised
- *      and checks for existing headers with the same name
- *      but ignores the values.
- *
- *    Revision 1.19  2007/04/17 18:14:06  fabiankeil
- *    Add list_contains_item().
- *
- *    Revision 1.18  2006/12/28 19:21:23  fabiankeil
- *    Fixed gcc43 warning and enabled list_is_valid()'s loop
- *    detection again. It was ineffective since the removal of
- *    the arbitrary list length limit two years ago.
- *
- *    Revision 1.17  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.15.2.2  2004/05/25 02:04:23  david__schmidt
- *    Removed the "arbitrary" 1000 filter limit in file.c.  See tracker #911950.
- *
- *    Revision 1.15.2.1  2002/11/28 18:14:54  oes
- *    Added unmap function that removes all items with a given
- *    name from a map.
- *
- *    Revision 1.15  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.14  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.13  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.12  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.11  2001/10/23 21:21:03  jongfoster
- *    New error handling - error codes are now jb_errs, not ints.
- *    Changed the way map() handles out-of-memory, to dramatically
- *    reduce the amount of error-checking clutter needed.
- *
- *    Revision 1.10  2001/09/16 17:30:24  jongfoster
- *    Fixing a compiler warning.
- *
- *    Revision 1.9  2001/09/16 13:20:29  jongfoster
- *    Rewrite of list library.  Now has seperate header and list_entry
- *    structures.  Also added a large sprinking of assert()s to the list
- *    code.
- *
- *    Revision 1.8  2001/08/07 14:00:20  oes
- *    Fixed comment
- *
- *    Revision 1.7  2001/08/05 16:06:20  jongfoster
- *    Modifiying "struct map" so that there are now separate header and
- *    "map_entry" structures.  This means that functions which modify a
- *    map no longer need to return a pointer to the modified map.
- *    Also, it no longer reverses the order of the entries (which may be
- *    important with some advanced template substitutions).
- *
- *    Revision 1.6  2001/07/31 14:44:51  oes
- *    list_to_text() now appends empty line at end
- *
- *    Revision 1.5  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.4  2001/06/29 13:30:22  oes
- *    - Added Convenience function enlist_unique_header(),
- *      which takes the Header name and value as separate
- *      arguments and thus saves the pain of sprintf()ing
- *      and determining the Header name length to enlist_unique
- *    - Improved comments
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.3  2001/06/03 19:12:24  oes
- *    functions for new struct map, extended enlist_unique
- *
- *    Revision 1.2  2001/06/01 18:49:17  jongfoster
- *    Replaced "list_share" with "list" - the tiny memory gain was not
- *    worth the extra complexity.
- *
- *    Revision 1.1  2001/05/31 21:11:53  jongfoster
- *    - Moved linked list support to new "list.c" file.
- *      Structure definitions are still in project.h,
- *      function prototypes are now in "list.h".
- *    - Added support for "struct list_share", which is identical
- *      to "struct list" except it saves memory by not duplicating
- *      the strings.  Obviously, this only works if there is some
- *      other way of managing the memory used by the strings.
- *      (These list_share lists are used for lists which last
- *      for only 1 request, and where all the list entries are
- *      just coming directly from entries in the actionsfile.)
- *      Note that you still need to destroy list_share lists
- *      properly to free the nodes - it's only the strings
- *      which are shared.
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#ifndef _WIN32
-/* FIXME: The following headers are not needed for Win32.  Are they
- * needed on other platforms?
- */
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <ctype.h>
-#endif
-#include <string.h>
-
-#if !defined(_WIN32) && !defined(__OS2__)
-#include <unistd.h>
-#endif
-
-#include <assert.h>
-
-#include "project.h"
-#include "list.h"
-#include "miscutil.h"
-
-const char list_h_rcs[] = LIST_H_VERSION;
-
-
-static int list_is_valid (const struct list *the_list);
-
-
-/*********************************************************************
- *
- * Function    :  init_list
- *
- * Description :  Create a new, empty list in user-allocated memory.
- *                Caller should allocate a "struct list" variable,
- *                then pass it to this function.
- *                (Implementation note:  Rather than calling this
- *                function, you can also just memset the memory to
- *                zero, e.g. if you have a larger structure you
- *                want to initialize quickly.  However, that isn't
- *                really good design.)
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void init_list(struct list *the_list)
-{
-   memset(the_list, '\0', sizeof(*the_list));
-}
-
-
-/*********************************************************************
- *
- * Function    :  destroy_list
- *
- * Description :  Destroy a string list (opposite of list_init).
- *                On return, the memory used by the list entries has
- *                been freed, but not the memory used by the_list
- *                itself.  You should not re-use the_list without
- *                calling list_init().
- *
- *                (Implementation note:  You *can* reuse the_list
- *                without calling list_init(), but please don't.
- *                If you want to remove all entries from a list
- *                and still have a usable list, then use
- *                list_remove_all().)
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void destroy_list (struct list *the_list)
-{
-   struct list_entry *cur_entry, *next_entry;
-
-   assert(the_list);
-
-   for (cur_entry = the_list->first; cur_entry ; cur_entry = next_entry)
-   {
-      next_entry = cur_entry->next;
-      freez(cur_entry->str);
-      free(cur_entry);
-   }
-
-   the_list->first = NULL;
-   the_list->last = NULL;
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_is_valid
- *
- * Description :  Check that a string list is valid.  The intended
- *                usage is "assert(list_is_valid(the_list))".
- *                Currently this checks that "the_list->last"
- *                is correct, and that the list dosn't contain
- *                circular references.  It is likely to crash if
- *                it's passed complete garbage.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list.  Must be non-null.
- *
- * Returns     :  1 if list is valid, 0 otherwise.
- *
- *********************************************************************/
-static int list_is_valid (const struct list *the_list)
-{
-   /*
-    * If you don't want this check, just change the line below
-    * from "#if 1" to "#if 0".
-    */
-#if 1
-   const struct list_entry *cur_entry;
-   const struct list_entry *last_entry = NULL;
-   int entry = 0;
-
-   assert(the_list);
-
-   for (cur_entry = the_list->first; cur_entry ; cur_entry = cur_entry->next)
-   {
-      last_entry = cur_entry;
-
-      if (cur_entry->str)
-      {
-         /*
-          * Just check that this string can be accessed - i.e. it's a valid
-          * pointer.
-          */
-         (void)strlen(cur_entry->str);
-      }
-
-      /*
-       * Check for looping back to first
-       */
-      if ((entry++ != 0) && (cur_entry == the_list->first))
-      {
-         return 0;
-      }
-
-      /*
-       * Arbitrarily limit list length to prevent infinite loops.
-       * Note that the 1000 limit was hit by a real user in tracker 911950;
-       * removing it for now.  Real circular references should eventually
-       * be caught by the check above, anyway.
-       */         
-      /*
-      if (entry > 1000)
-      {           
-         return 0;
-      }           
-      */          
-
-      /*
-       * Check this isn't marked as the last entry, unless of course it's
-       * *really* the last entry.
-       */
-      if ((the_list->last == cur_entry) && (cur_entry->next != NULL))
-      {
-         /* This is the last entry, but there's data after it !!?? */
-         return 0;
-      }
-   }
-
-   return (the_list->last == last_entry);
-#else
-   return 1;
-#endif
-}
-
-/*********************************************************************
- *
- * Function    :  enlist
- *
- * Description :  Append a string into a specified string list.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *          2  :  str = string to add to the list (maybe NULL)
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *                On error, the_list will be unchanged.
- *
- *********************************************************************/
-jb_err enlist(struct list *the_list, const char *str)
-{
-   struct list_entry *cur;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-
-   if (NULL == (cur = (struct list_entry *)zalloc(sizeof(*cur))))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (str)
-   {
-      if (NULL == (cur->str = strdup(str)))
-      {
-         free(cur);
-         return JB_ERR_MEMORY;
-      }
-   }
-   /* else { cur->str = NULL; }  - implied by zalloc */
-
-   /* cur->next = NULL;  - implied by zalloc */
-
-   if (the_list->last)
-   {
-      the_list->last->next = cur;
-      the_list->last = cur;
-   }
-   else
-   {
-      the_list->first = cur;
-      the_list->last = cur;
-   }
-
-   assert(list_is_valid(the_list));
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  enlist_first
- *
- * Description :  Append a string as first element into a specified
- *                string list.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *          2  :  str = string to add to the list (maybe NULL)
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *                On error, the_list will be unchanged.
- *
- *********************************************************************/
-jb_err enlist_first(struct list *the_list, const char *str)
-{
-   struct list_entry *cur;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-
-   if (NULL == (cur = (struct list_entry *)zalloc(sizeof(*cur))))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (str)
-   {
-      if (NULL == (cur->str = strdup(str)))
-      {
-         free(cur);
-         return JB_ERR_MEMORY;
-      }
-   }
-   /* else { cur->str = NULL; }  - implied by zalloc */
-
-   cur->next = the_list->first;
-
-   the_list->first = cur;
-   if (the_list->last == NULL)
-   {
-      the_list->last = cur;
-   }
-
-   assert(list_is_valid(the_list));
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  enlist_unique
- *
- * Description :  Append a string into a specified string list,
- *                if & only if it's not there already.
- *                If the num_significant_chars argument is nonzero,
- *                only compare up to the nth character.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *          2  :  str = string to add to the list
- *          3  :  num_significant_chars = number of chars to use
- *                for uniqueness test, or 0 to require an exact match.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *                On error, the_list will be unchanged.
- *                "Success" does not indicate whether or not the
- *                item was already in the list.
- *
- *********************************************************************/
-jb_err enlist_unique(struct list *the_list, const char *str,
-                     size_t num_significant_chars)
-{
-   struct list_entry *cur_entry;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-   assert(str);
-   assert(num_significant_chars >= 0);
-   assert(num_significant_chars <= strlen(str));
-
-   if (num_significant_chars > 0)
-   {
-      for (cur_entry = the_list->first; cur_entry != NULL; cur_entry = cur_entry->next)
-      {
-         if ( (cur_entry->str != NULL)
-           && (0 == strncmp(str, cur_entry->str, num_significant_chars)))
-         {
-            /* Already there */
-            return JB_ERR_OK;
-         }
-      }
-   }
-   else
-   {
-      /* Test whole string */
-      for (cur_entry = the_list->first; cur_entry != NULL; cur_entry = cur_entry->next)
-      {
-         if ( (cur_entry->str != NULL) && (0 == strcmp(str, cur_entry->str)))
-         {
-            /* Already there */
-            return JB_ERR_OK;
-         }
-      }
-   }
-
-   return enlist(the_list, str);
-}
-
-
-/*********************************************************************
- *
- * Function    :  enlist_unique_header
- *
- * Description :  Make a HTTP header from the two strings name and value,
- *                and append the result into a specified string list,
- *                if & only if there isn't already a header with that name.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *          2  :  name = HTTP header name (e.g. "Content-type")
- *          3  :  value = HTTP header value (e.g. "text/html")
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *                On error, the_list will be unchanged.
- *                "Success" does not indicate whether or not the
- *                header was already in the list.
- *
- *********************************************************************/
-jb_err enlist_unique_header(struct list *the_list, const char *name,
-                            const char *value)
-{
-   jb_err result = JB_ERR_MEMORY;
-   char *header;
-   size_t header_size;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-   assert(name);
-   assert(value);
-
-   /* + 2 for the ': ', + 1 for the \0 */
-   header_size = strlen(name) + 2 + strlen(value) + 1;
-   header = (char *)malloc(header_size);
-
-   if (NULL != header)
-   {
-      const size_t bytes_to_compare = strlen(name) + 2;
-
-      snprintf(header, header_size, "%s: %s", name, value);
-      result = enlist_unique(the_list, header, bytes_to_compare);
-      free(header);
-      assert(list_is_valid(the_list));
-   }
-
-   return result;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_remove_all
- *
- * Description :  Remove all entries from a list.  On return, the_list
- *                is a valid, empty list.  Note that this is similar
- *                to destroy_list(), but the difference is that this
- *                function guarantees that the list structure is still
- *                valid after the call.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void list_remove_all(struct list *the_list)
-{
-   struct list_entry *cur_entry;
-   struct list_entry *next_entry;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-
-   for (cur_entry = the_list->first; cur_entry ; cur_entry = next_entry)
-   {
-      next_entry = cur_entry->next;
-      freez(cur_entry->str);
-      free(cur_entry);
-   }
-
-   the_list->first = the_list->last = NULL;
-
-   assert(list_is_valid(the_list));
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_to_text
- *
- * Description :  "Flatten" a string list into 1 long \r\n delimited string,
- *                adding an empty line at the end.  NULL entries are ignored.
- *                This function does not change the_list.
- *
- *                XXX: Should probably be renamed as it's only
- *                useful (and used) to flatten header lists.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *
- * Returns     :  NULL on malloc error, else new long string.
- *                Caller must free() it.
- *
- *********************************************************************/
-char *list_to_text(const struct list *the_list)
-{
-   struct list_entry *cur_entry;
-   char *text;
-   size_t text_length;
-   char *cursor;
-   size_t bytes_left;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-
-   /*
-    * Calculate the lenght of the final text.
-    * '2' because of the '\r\n' at the end of
-    * each string and at the end of the text.
-    */
-   text_length = 2;
-   for (cur_entry = the_list->first; cur_entry; cur_entry = cur_entry->next)
-   {
-      if (cur_entry->str)
-      {
-         text_length += strlen(cur_entry->str) + 2;
-      }
-   }
-
-   bytes_left = text_length + 1;
-
-   text = (char *)malloc(bytes_left);
-   if (NULL == text)
-   {
-      return NULL;
-   }
-
-   cursor = text;
-
-   for (cur_entry = the_list->first; cur_entry; cur_entry = cur_entry->next)
-   {
-      if (cur_entry->str)
-      {
-         const int written = snprintf(cursor, bytes_left, "%s\r\n", cur_entry->str);
-
-         assert(written > 0);
-         assert(written < bytes_left);
-
-         bytes_left -= (size_t)written;
-         cursor += (size_t)written;
-      }
-   }
-
-   assert(bytes_left == 3);
-
-   *cursor++ = '\r';
-   *cursor++ = '\n';
-   *cursor   = '\0';
-
-   assert(text_length == cursor - text);
-   assert(text[text_length] == '\0');
-
-   return text;
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_remove_item
- *
- * Description :  Remove a string from a specified string list.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list
- *          2  :  str = string to remove from the list - non-NULL
- *
- * Returns     :  Number of times it was removed.
- *
- *********************************************************************/
-int list_remove_item(struct list *the_list, const char *str)
-{
-   struct list_entry *prev = NULL;
-   struct list_entry *cur;
-   struct list_entry *next;
-   int count = 0;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-   assert(str);
-
-   cur = the_list->first;
-
-   while (cur != NULL)
-   {
-      next = cur->next;
-
-      if ((cur->str != NULL) && (0 == strcmp(str, cur->str)))
-      {
-         count++;
-
-         if (prev != NULL)
-         {
-            prev->next = next;
-         }
-         else
-         {
-            the_list->first = next;
-         }
-         free((char *)cur->str);
-         free(cur);
-      }
-      else
-      {
-         prev = cur;
-      }
-      cur = next;
-   }
-
-   the_list->last = prev;
-
-   assert(list_is_valid(the_list));
-
-   return count;
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_remove_list
- *
- * Description :  Remove all strings in one list from another list.
- *                This is currently a brute-force algorithm
- *                (it compares every pair of strings).
- *
- * Parameters  :
- *          1  :  dest = list to change
- *          2  :  src = list of strings to remove
- *
- * Returns     :  Total number of strings removed.
- *
- *********************************************************************/
-int list_remove_list(struct list *dest, const struct list *src)
-{
-   struct list_entry *cur;
-   int count = 0;
-
-   assert(src);
-   assert(dest);
-   assert(list_is_valid(src));
-   assert(list_is_valid(dest));
-
-   for (cur = src->first; cur != NULL; cur = cur->next)
-   {
-      if (cur->str != NULL)
-      {
-         count += list_remove_item(dest, cur->str);
-      }
-   }
-
-   assert(list_is_valid(src));
-   assert(list_is_valid(dest));
-
-   return count;
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_duplicate
- *
- * Description :  Copy a string list
- *
- * Parameters  :
- *          1  :  dest = Destination list.  Must be a valid list.
- *                       All existing entries will be removed.
- *          1  :  src = pointer to source list for copy.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *                On error, dest will be empty.
- *
- *********************************************************************/
-jb_err list_duplicate(struct list *dest, const struct list *src)
-{
-   struct list_entry * cur_src;
-   struct list_entry * cur_dest;
-
-   assert(src);
-   assert(dest);
-   assert(list_is_valid(src));
-   assert(list_is_valid(dest));
-
-   list_remove_all(dest);
-
-   /* Need to process first entry specially so we can set dest->first */
-   cur_src = src->first;
-   if (cur_src)
-   {
-      cur_dest = dest->first = (struct list_entry *)zalloc(sizeof(*cur_dest));
-      if (cur_dest == NULL)
-      {
-         destroy_list(dest);
-
-         assert(list_is_valid(src));
-         assert(list_is_valid(dest));
-
-         return JB_ERR_MEMORY;
-      }
-
-      if (cur_src->str)
-      {
-         cur_dest->str = strdup(cur_src->str);
-         if (cur_dest->str == NULL)
-         {
-            destroy_list(dest);
-
-            assert(list_is_valid(src));
-            assert(list_is_valid(dest));
-
-            return JB_ERR_MEMORY;
-         }
-      }
-      /* else { cur_dest->str = NULL; }  - implied by zalloc */
-
-      /* Now process the rest */
-      for (cur_src = cur_src->next; cur_src; cur_src = cur_src->next)
-      {
-         cur_dest = cur_dest->next = (struct list_entry *)zalloc(sizeof(*cur_dest));
-         if (cur_dest == NULL)
-         {
-            destroy_list(dest);
-
-            assert(list_is_valid(src));
-            assert(list_is_valid(dest));
-
-            return JB_ERR_MEMORY;
-         }
-         if (cur_src->str)
-         {
-            cur_dest->str = strdup(cur_src->str);
-            if (cur_dest->str == NULL)
-            {
-               destroy_list(dest);
-
-               assert(list_is_valid(src));
-               assert(list_is_valid(dest));
-
-               return JB_ERR_MEMORY;
-            }
-         }
-         /* else { cur_dest->str = NULL; }  - implied by zalloc */
-      }
-
-      dest->last = cur_dest;
-   }
-
-   assert(list_is_valid(src));
-   assert(list_is_valid(dest));
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_append_list_unique
- *
- * Description :  Append a string list to another list.
- *                Duplicate items are not added.
- *
- * Parameters  :
- *          1  :  dest = pointer to destination list for merge.
- *          2  :  src = pointer to source for merge.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *                On error, some (but not all) of src might have
- *                been copied into dest.
- *
- *********************************************************************/
-jb_err list_append_list_unique(struct list *dest, const struct list *src)
-{
-   struct list_entry * cur;
-
-   assert(src);
-   assert(dest);
-   assert(list_is_valid(src));
-   assert(list_is_valid(dest));
-
-   for (cur = src->first; cur; cur = cur->next)
-   {
-      if (cur->str)
-      {
-         if (enlist_unique(dest, cur->str, 0))
-         {
-            assert(list_is_valid(src));
-            assert(list_is_valid(dest));
-
-            return JB_ERR_MEMORY;
-         }
-      }
-   }
-
-   assert(list_is_valid(src));
-   assert(list_is_valid(dest));
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_is_empty
- *
- * Description :  Test whether a list is empty.  Does not change the list.
- *
- * Parameters  :
- *          1  :  the_list = pointer to list to test.
- *
- * Returns     :  Nonzero if the list contains no entries.
- *
- *********************************************************************/
-int list_is_empty(const struct list *the_list)
-{
-   assert(the_list);
-   assert(list_is_valid(the_list));
-
-   return (the_list->first == NULL);
-}
-
-
-/*********************************************************************
- *
- * Function    :  list_contains_item
- *
- * Description :  Tests whether a list item is already set.
- *                Does not change the list.
- *
- * Parameters  :
- *          1  :  the_list = list to search in
- *          2  :  str = string to search for
- *
- * Returns     :  TRUE if the item was found,
- *                FALSE otherwise.
- *
- *********************************************************************/
-int list_contains_item(const struct list *the_list, const char *str)
-{
-   struct list_entry *entry;
-
-   assert(the_list);
-   assert(list_is_valid(the_list));
-   assert(str);
-
-   for (entry = the_list->first; entry != NULL; entry = entry->next)
-   {
-      if (entry->str == NULL)
-      {
-         /*
-          * NULL pointers are allowed in some lists. 
-          * For example for csp->headers in case a
-          * header was removed.
-          */
-         continue;
-      }
-
-      if (0 == strcmp(str, entry->str))
-      {
-         /* Item found */
-         return TRUE;
-      }
-   }
-
-   return FALSE;
-}
-
-
-/*********************************************************************
- *
- * Function    :  new_map
- *
- * Description :  Create a new, empty map.
- *
- * Parameters  :  N/A
- *
- * Returns     :  A new, empty map, or NULL if out of memory.
- *
- *********************************************************************/
-struct map *new_map(void)
-{
-   return (struct map *) zalloc(sizeof(struct map));
-}
-
-
-/*********************************************************************
- *
- * Function    :  free_map
- *
- * Description :  Free the memory occupied by a map and its
- *                depandant strings
- *
- * Parameters  :
- *          1  :  the_map = map to be freed.  May be NULL.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_map(struct map *the_map)
-{
-   struct map_entry *cur_entry;
-   struct map_entry *next_entry;
-
-   if (the_map == NULL)
-   {
-      return;
-   }
-
-   for (cur_entry = the_map->first; cur_entry != NULL; cur_entry = next_entry)
-   {
-      freez(cur_entry->name);
-      freez(cur_entry->value);
-
-      next_entry = cur_entry->next;
-      free(cur_entry);
-   }
-
-   the_map->first = the_map->last = NULL;
-
-   free(the_map);
-}
-
-
-/*********************************************************************
- *
- * Function    :  map
- *
- * Description :  Add a mapping from given name to given value to a
- *                given map.
- *
- *                Note: Since all strings will be free()d in free_map()
- *                      later, set the copy flags for constants or
- *                      strings that will be independantly free()d.
- *
- *                Note2: This function allows NULL parameters - it
- *                       returns JB_ERR_MEMORY in that case.
- *
- *                Note3: If this function returns JB_ERR_MEMORY,
- *                       it will free(name) unless you specify
- *                       name_needs_copying, and similarly it will
- *                       free(value) unless you specify
- *                       value_needs_copying.
- *
- *                Due to Note2 and Note3 above, the following code
- *                is legal, and will never crash or leak memory even
- *                if the system runs out of memory:
- *
- *                    err = map(mymap, "xyz", 1, html_encode(somestring), 0);
- *
- *                err will be set to JB_ERR_MEMORY if either call runs
- *                out-of-memory.  Without these features, you would
- *                need to check the return value of html_encode in the
- *                above example for NULL, which (at least) doubles the
- *                amount of error-checking code needed.
- *
- * Parameters  :
- *          1  :  the_map = map to add to
- *          2  :  name = name to add
- *          3  :  name_needs_copying = flag set if a copy of name should be used
- *          4  :  value = value to add
- *          5  :  value_needs_copying = flag set if a copy of value should be used
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err map(struct map *the_map,
-           const char *name, int name_needs_copying,
-           const char *value, int value_needs_copying)
-{
-   struct map_entry *new_entry;
-
-   assert(the_map);
-
-   if ( (NULL == value)
-     || (NULL == name)
-     || (NULL == (new_entry = zalloc(sizeof(*new_entry)))) )
-   {
-      if ((name != NULL) && (!name_needs_copying))
-      {
-          free((char *)name);
-      }
-      if ((value != NULL) && (!value_needs_copying))
-      {
-          free((char *)value);
-      }
-      return JB_ERR_MEMORY;
-   }
-
-   if (name_needs_copying)
-   {
-      if (NULL == (name = strdup(name)))
-      {
-         free(new_entry);
-         if (!value_needs_copying)
-         {
-             free((char *)value);
-         }
-         return JB_ERR_MEMORY;
-      }
-   }
-
-   if (value_needs_copying)
-   {
-      if (NULL == (value = strdup(value)))
-      {
-         free((char *)name);
-         free(new_entry);
-         return JB_ERR_MEMORY;
-      }
-   }
-
-   new_entry->name = name;
-   new_entry->value = value;
-   /* new_entry->next = NULL;  - implied by zalloc */
-
-   if (the_map->last)
-   {
-      the_map->last->next = new_entry;
-      the_map->last = new_entry;
-   }
-   else
-   {
-      the_map->first = new_entry;
-      the_map->last = new_entry;
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  unmap
- *
- * Description :  Remove all map_entry structs with a given name from
- *                a given map.
- *
- * Parameters  :
- *          1  :  the_map = map to look in
- *          2  :  name = name to unmap
- *
- * Returns     :  JB_ERR_OK
- *
- *********************************************************************/
-jb_err unmap(struct map *the_map, const char *name)
-{
-   struct map_entry *cur_entry, *last_entry;
-
-   assert(the_map);
-   assert(name);
-   
-   last_entry = the_map->first;
-
-   for (cur_entry = the_map->first; cur_entry != NULL; cur_entry = cur_entry->next)
-   {
-      if (!strcmp(name, cur_entry->name))
-      {
-         /*
-          * Update the incoming pointer
-          */
-         if (cur_entry == the_map->first)
-         {
-            the_map->first = cur_entry->next;
-         }
-         else
-         {
-            last_entry->next = cur_entry->next;
-         }
-
-         /*
-          * Update the map's last pointer 
-          */
-         if (cur_entry == the_map->last)
-         {
-            the_map->last = last_entry;
-         }
-         
-         /*
-          * Free the map_entry
-          */
-         freez(cur_entry->name);
-         freez(cur_entry->value);
-         freez(cur_entry);
-
-         cur_entry = last_entry;
-      }
-      else
-      {
-         last_entry = cur_entry;
-      }
-   }
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  lookup
- *
- * Description :  Look up an item with a given name in a map, and
- *                return its value
- *
- * Parameters  :
- *          1  :  the_map = map to look in
- *          2  :  name = name parameter to look for
- *
- * Returns     :  the value if found, else the empty string.
- *                Return value is alloced as part of the map, so
- *                it is freed when the map is destroyed.  Caller
- *                must not free or modify it.
- *
- *********************************************************************/
-const char *lookup(const struct map *the_map, const char *name)
-{
-   const struct map_entry *cur_entry;
-
-   assert(the_map);
-   assert(name);
-
-   for (cur_entry = the_map->first; cur_entry != NULL; cur_entry = cur_entry->next)
-   {
-      if (!strcmp(name, cur_entry->name))
-      {
-         return cur_entry->value;
-      }
-   }
-   return "";
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/list.h b/external/privoxy/list.h
deleted file mode 100644
index b116237..0000000
--- a/external/privoxy/list.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef LIST_H_INCLUDED
-#define LIST_H_INCLUDED
-#define LIST_H_VERSION "$Id: list.h,v 1.15 2007/04/17 18:14:06 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/list.h,v $
- *
- * Purpose     :  Declares functions to handle lists.
- *                Functions declared include:
- *                   `destroy_list', `enlist' and `list_to_text'
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: list.h,v $
- *    Revision 1.15  2007/04/17 18:14:06  fabiankeil
- *    Add list_contains_item().
- *
- *    Revision 1.14  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.12.2.1  2002/11/28 18:14:54  oes
- *    Added unmap function that removes all items with a given
- *    name from a map.
- *
- *    Revision 1.12  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.11  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.10  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.9  2001/10/23 21:21:03  jongfoster
- *    New error handling - error codes are now jb_errs, not ints.
- *    Changed the way map() handles out-of-memory, to dramatically
- *    reduce the amount of error-checking clutter needed.
- *
- *    Revision 1.8  2001/09/16 17:30:24  jongfoster
- *    Fixing a compiler warning.
- *
- *    Revision 1.7  2001/09/16 13:20:29  jongfoster
- *    Rewrite of list library.  Now has seperate header and list_entry
- *    structures.  Also added a large sprinking of assert()s to the list
- *    code.
- *
- *    Revision 1.6  2001/08/05 16:06:20  jongfoster
- *    Modifiying "struct map" so that there are now separate header and
- *    "map_entry" structures.  This means that functions which modify a
- *    map no longer need to return a pointer to the modified map.
- *    Also, it no longer reverses the order of the entries (which may be
- *    important with some advanced template substitutions).
- *
- *    Revision 1.5  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.4  2001/06/29 13:30:37  oes
- *    - Introduced enlist_unique_header()
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.3  2001/06/03 11:03:48  oes
- *    introduced functions for new list type "map": map(), lookup(),
- *    free_map(), and extended enlist_unique
- *
- *    Revision 1.2  2001/06/01 18:49:17  jongfoster
- *    Replaced "list_share" with "list" - the tiny memory gain was not
- *    worth the extra complexity.
- *
- *    Revision 1.1  2001/05/31 21:11:53  jongfoster
- *    - Moved linked list support to new "list.c" file.
- *      Structure definitions are still in project.h,
- *      function prototypes are now in "list.h".
- *    - Added support for "struct list_share", which is identical
- *      to "struct list" except it saves memory by not duplicating
- *      the strings.  Obviously, this only works if there is some
- *      other way of managing the memory used by the strings.
- *      (These list_share lists are used for lists which last
- *      for only 1 request, and where all the list entries are
- *      just coming directly from entries in the actionsfile.)
- *      Note that you still need to destroy list_share lists
- *      properly to free the nodes - it's only the strings
- *      which are shared.
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/*
- * struct list
- *
- * A linked list class.
- */
-
-extern void init_list    (struct list *the_list);
-extern void destroy_list (struct list *the_list);
-
-extern jb_err enlist                 (struct list *the_list, const char *str);
-extern jb_err enlist_unique          (struct list *the_list, const char *str, size_t num_significant_chars);
-extern jb_err enlist_unique_header   (struct list *the_list, const char *name, const char *value);
-extern jb_err enlist_first           (struct list *the_list, const char *str);
-extern jb_err list_append_list_unique(struct list *dest,     const struct list *src);
-extern jb_err list_duplicate         (struct list *dest,     const struct list *src);
-
-extern int    list_remove_item(struct list *the_list, const char *str);
-extern int    list_remove_list(struct list *dest,     const struct list *src);
-extern void   list_remove_all (struct list *the_list);
-
-extern int    list_is_empty(const struct list *the_list);
-
-extern char * list_to_text(const struct list *the_list);
-
-extern int    list_contains_item(const struct list *the_list, const char *str);
-
-/*
- * struct map
- *
- * A class which maps names to values.
- *
- * Note: You must allocate this through new_map() and free it
- * through free_map().
- */
-
-extern struct map * new_map  (void);
-extern void         free_map (struct map * the_map);
-
-extern jb_err       map      (struct map * the_map,
-                              const char * name, int name_needs_copying,
-                              const char * value, int value_needs_copying);
-extern jb_err       unmap    (struct map *the_map,
-                              const char *name);
-extern const char * lookup   (const struct map * the_map, const char * name);
-
-
-/* Revision control strings from this header and associated .c file */
-extern const char list_rcs[];
-extern const char list_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef LIST_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/loadcfg.c b/external/privoxy/loadcfg.c
deleted file mode 100644
index c2e3bd1..0000000
--- a/external/privoxy/loadcfg.c
+++ /dev/null
@@ -1,2041 +0,0 @@
-const char loadcfg_rcs[] = "$Id: loadcfg.c,v 1.93 2009/03/18 21:46:26 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/loadcfg.c,v $
- *
- * Purpose     :  Loads settings from the configuration file into
- *                global variables.  This file contains both the
- *                routine to load the configuration and the global
- *                variables it writes to.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: loadcfg.c,v $
- *    Revision 1.93  2009/03/18 21:46:26  fabiankeil
- *    Revert the last commit as there's a better way.
- *
- *    Revision 1.92  2009/03/18 20:43:19  fabiankeil
- *    Don't enable LOG_LEVEL_INFO by default and don't apply the user's
- *    debug settings until the logfile has been opened (if there is one).
- *    Patch submitted by Roland in #2624120.
- *
- *    Revision 1.91  2009/03/09 17:29:08  fabiankeil
- *    As of r1.88, the show-status page can use a single line for
- *    warnings about ignored directives and the names of the ignored
- *    directives themselves. Reminded by Lee, finally closes #1856559.
- *
- *    Revision 1.90  2009/03/07 17:58:02  fabiankeil
- *    Fix two mingw32-only buffer overflows. Note that triggering
- *    them requires control over the configuration file in which
- *    case all bets are off anyway.
- *
- *    Revision 1.89  2009/03/01 18:46:33  fabiankeil
- *    - Help clang understand that we aren't
- *      dereferencing NULL pointers here.
- *    - Some style fixes in the modified region.
- *
- *    Revision 1.88  2009/02/28 10:57:10  fabiankeil
- *    Gimme a break or two. Don't let the show-status page
- *    link to the website documentation for the user-manual
- *    directive itself.
- *
- *    Revision 1.87  2009/02/15 07:56:13  fabiankeil
- *    Increase default socket timeout to 300 seconds.
- *
- *    Revision 1.86  2009/02/08 19:18:57  fabiankeil
- *    Now that we have the match-all.action file, the other action
- *    files changed their position in config->actions_file[] back
- *    to the way it was before standard.action got removed and the
- *    changes from revision 1.84 have to be reverted.
- *
- *    Revision 1.85  2009/01/22 12:06:26  fabiankeil
- *    Don't keep connections alive when running single-threaded.
- *
- *    Revision 1.84  2009/01/14 16:14:36  fabiankeil
- *    Due to the standard.action file removal, the other action
- *    files changed their position in config->actions_file[].
- *    Update mingw32 kludge accordingly.
- *
- *    Revision 1.83  2008/12/20 14:53:55  fabiankeil
- *    Add config option socket-timeout to control the time
- *    Privoxy waits for data to arrive on a socket. Useful
- *    in case of stale ssh tunnels or when fuzz-testing.
- *
- *    Revision 1.82  2008/11/16 12:43:49  fabiankeil
- *    Turn keep-alive support into a runtime feature
- *    that is disabled by setting keep-alive-timeout
- *    to a negative value.
- *
- *    Revision 1.81  2008/11/13 09:08:42  fabiankeil
- *    Add new config option: keep-alive-timeout.
- *
- *    Revision 1.80  2008/08/31 15:59:03  fabiankeil
- *    There's no reason to let remote toggling support depend
- *    on FEATURE_CGI_EDIT_ACTIONS, so make sure it doesn't.
- *
- *    Revision 1.79  2008/08/30 12:03:07  fabiankeil
- *    Remove FEATURE_COOKIE_JAR.
- *
- *    Revision 1.78  2008/08/02 08:23:22  fabiankeil
- *    If the enforce-blocks directive is used with FEATURE_FORCE_LOAD
- *    disabled, log a message that blocks will always be enforced
- *    instead of complaining about an unrecognized directive.
- *    Reported by Pietro Leone.
- *
- *    Revision 1.77  2008/05/26 16:13:22  fabiankeil
- *    Reuse directive_hash and don't hash the same directive twice.
- *
- *    Revision 1.76  2008/05/10 09:03:16  fabiankeil
- *    - Merge three string_append() calls.
- *    - Remove useless assertion.
- *
- *    Revision 1.75  2008/03/30 14:52:05  fabiankeil
- *    Rename load_actions_file() and load_re_filterfile()
- *    as they load multiple files "now".
- *
- *    Revision 1.74  2008/03/26 18:07:07  fabiankeil
- *    Add hostname directive. Closes PR#1918189.
- *
- *    Revision 1.73  2008/02/16 16:54:51  fabiankeil
- *    Fix typo.
- *
- *    Revision 1.72  2008/02/03 13:46:15  fabiankeil
- *    Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes.
- *
- *    Revision 1.71  2007/12/23 15:24:56  fabiankeil
- *    Reword "unrecognized directive" warning, use better
- *    mark up and add a <br>. Fixes parts of #1856559.
- *
- *    Revision 1.70  2007/12/15 14:24:05  fabiankeil
- *    Plug memory leak if listen-address only specifies the port.
- *
- *    Revision 1.69  2007/10/27 13:02:27  fabiankeil
- *    Relocate daemon-mode-related log messages to make sure
- *    they aren't shown again in case of configuration reloads.
- *
- *    Revision 1.68  2007/10/19 16:32:34  fabiankeil
- *    Plug memory leak introduced with my last commit.
- *
- *    Revision 1.67  2007/10/14 14:12:41  fabiankeil
- *    When in daemon mode, close stderr after the configuration file has been
- *    parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436.
- *
- *    Revision 1.66  2007/08/05 14:02:09  fabiankeil
- *    #1763173 from Stefan Huehner: declare unload_configfile() static.
- *
- *    Revision 1.65  2007/07/21 11:51:36  fabiankeil
- *    As Hal noticed, checking dispatch_cgi() as the last cruncher
- *    looks like a bug if CGI requests are blocked unintentionally,
- *    so don't do it unless the user enabled the new config option
- *    "allow-cgi-request-crunching".
- *
- *    Revision 1.64  2007/05/21 10:44:08  fabiankeil
- *    - Use strlcpy() instead of strcpy().
- *    - Stop treating actions files special. Expect a complete file name
- *      (with or without path) like it's done for the rest of the files.
- *      Closes FR#588084.
- *    - Remove an unnecessary temporary memory allocation.
- *    - Don't log anything to the console when running as
- *      daemon and no errors occurred.
- *
- *    Revision 1.63  2007/04/09 18:11:36  fabiankeil
- *    Don't mistake VC++'s _snprintf() for a snprintf() replacement.
- *
- *    Revision 1.62  2007/03/17 15:20:05  fabiankeil
- *    New config option: enforce-blocks.
- *
- *    Revision 1.61  2007/03/16 16:47:35  fabiankeil
- *    - Mention other reasons why acl directive loading might have failed.
- *    - Don't log the acl source if the acl destination is to blame.
- *
- *    Revision 1.60  2007/01/27 13:09:16  fabiankeil
- *    Add new config option "templdir" to
- *    change the templates directory.
- *
- *    Revision 1.59  2006/12/31 17:56:38  fabiankeil
- *    Added config option accept-intercepted-requests
- *    and disabled it by default.
- *
- *    Revision 1.58  2006/12/31 14:24:29  fabiankeil
- *    Fix gcc43 compiler warnings.
- *
- *    Revision 1.57  2006/12/21 12:57:48  fabiankeil
- *    Add config option "split-large-forms"
- *    to work around the browser bug reported
- *    in BR #1570678.
- *
- *    Revision 1.56  2006/12/17 17:04:51  fabiankeil
- *    Move the <br> in the generated HTML for the config
- *    options from the beginning of the string to its end.
- *    Keeps the white space in balance.
- *
- *    Revision 1.55  2006/11/28 15:31:52  fabiankeil
- *    Fix memory leak in case of config file reloads.
- *
- *    Revision 1.54  2006/10/21 16:04:22  fabiankeil
- *    Modified kludge for win32 to make ming32 menu
- *    "Options/Edit Filters" (sort of) work again.
- *    Same limitations as for the action files apply.
- *    Fixes BR 1567373.
- *
- *    Revision 1.53  2006/09/06 18:45:03  fabiankeil
- *    Incorporate modified version of Roland Rosenfeld's patch to
- *    optionally access the user-manual via Privoxy. Closes patch 679075.
- *
- *    Formatting changed to Privoxy style, added call to
- *    cgi_error_no_template if the requested file doesn't
- *    exist and modified check whether or not Privoxy itself
- *    should serve the manual. Should work cross-platform now.
- *
- *    Revision 1.52  2006/09/06 10:43:32  fabiankeil
- *    Added config option enable-remote-http-toggle
- *    to specify if Privoxy should recognize special
- *    headers (currently only X-Filter) to change its
- *    behaviour. Disabled by default.
- *
- *    Revision 1.51  2006/09/06 09:23:37  fabiankeil
- *    Make number of retries in case of forwarded-connect problems
- *    a config file option (forwarded-connect-retries) and use 0 as
- *    default.
- *
- *    Revision 1.50  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.48.2.7  2006/02/02 17:29:16  david__schmidt
- *    Don't forget to malloc space for the null terminator...
- *
- *    Revision 1.48.2.6  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.48.2.5  2003/05/08 15:17:25  oes
- *    Closed two memory leaks; hopefully the last remaining ones
- *    (in the main execution paths, anyway).
- *
- *    Revision 1.48.2.4  2003/04/11 12:06:14  oes
- *    Addressed bug #719435
- *     - Extraneous filterfile directives now logged as errors
- *     - This and unrecnonised directives now really obvious on status page
- *
- *    Revision 1.48.2.3  2003/03/11 11:53:59  oes
- *    Cosmetic: Renamed cryptic variable
- *
- *    Revision 1.48.2.2  2002/11/12 16:28:20  oes
- *    Move unrelated variable declaration out of #ifdef FEATURE_ACL; fixes bug #636655
- *
- *    Revision 1.48.2.1  2002/08/21 17:58:05  oes
- *    Temp kludge to let user and default action file be edited through win32 GUI (FR 592080)
- *
- *    Revision 1.48  2002/05/14 21:30:38  oes
- *    savearg now uses own linking code instead of (now special-cased) add_help_link
- *
- *    Revision 1.47  2002/05/12 21:36:29  jongfoster
- *    Correcting function comments
- *
- *    Revision 1.46  2002/04/26 12:55:14  oes
- *     - New option "user-manual", defaults to our site
- *       via project.h #define
- *     - savearg now embeds option names in help links
- *
- *    Revision 1.45  2002/04/24 02:11:54  oes
- *    Jon's multiple AF patch: Allow up to MAX_AF_FILES actionsfile options
- *
- *    Revision 1.44  2002/04/08 20:37:13  swa
- *    fixed JB spelling
- *
- *    Revision 1.43  2002/04/08 20:36:50  swa
- *    fixed JB spelling
- *
- *    Revision 1.42  2002/04/05 15:50:15  oes
- *    fix for invalid HTML proxy_args
- *
- *    Revision 1.41  2002/03/31 17:19:00  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.40  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.39  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.38  2002/03/24 13:05:48  jongfoster
- *    Renaming re_filterfile to filterfile
- *
- *    Revision 1.37  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.36  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.35  2002/03/07 03:52:44  oes
- *    Set logging to tty for --no-daemon mode
- *
- *    Revision 1.34  2002/03/06 23:14:35  jongfoster
- *    Trivial cosmetic changes to make function comments easier to find.
- *
- *    Revision 1.33  2002/03/05 04:52:42  oes
- *    Deleted non-errlog debugging code
- *
- *    Revision 1.32  2002/03/04 18:24:53  oes
- *    Re-enabled output of unknown config directive hash
- *
- *    Revision 1.31  2002/03/03 15:07:20  oes
- *    Re-enabled automatic config reloading
- *
- *    Revision 1.30  2002/01/22 23:31:43  jongfoster
- *    Replacing strsav() with string_append()
- *
- *    Revision 1.29  2002/01/17 21:02:30  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Revision 1.28  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.27  2001/11/07 00:02:13  steudten
- *    Add line number in error output for lineparsing for
- *    actionsfile and configfile.
- *    Special handling for CLF added.
- *
- *    Revision 1.26  2001/11/05 21:41:43  steudten
- *    Add changes to be a real daemon just for unix os.
- *    (change cwd to /, detach from controlling tty, set
- *    process group and session leader to the own process.
- *    Add DBG() Macro.
- *    Add some fatal-error log message for failed malloc().
- *    Add '-d' if compiled with 'configure --with-debug' to
- *    enable debug output.
- *
- *    Revision 1.25  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.24  2001/10/23 21:40:30  jongfoster
- *    Added support for enable-edit-actions and enable-remote-toggle config
- *    file options.
- *
- *    Revision 1.23  2001/10/07 15:36:00  oes
- *    Introduced new config option "buffer-limit"
- *
- *    Revision 1.22  2001/09/22 16:36:59  jongfoster
- *    Removing unused parameter fs from read_config_line()
- *
- *    Revision 1.21  2001/09/16 17:10:43  jongfoster
- *    Moving function savearg() here, since it was the only thing left in
- *    showargs.c.
- *
- *    Revision 1.20  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.19  2001/07/15 17:45:16  jongfoster
- *    Removing some unused #includes
- *
- *    Revision 1.18  2001/07/13 14:01:14  oes
- *     - Removed all #ifdef PCRS
- *     - Removed vim-settings
- *
- *    Revision 1.17  2001/06/29 13:31:03  oes
- *    - Improved comments
- *    - Fixed (actionsfile) and sorted hashes
- *    - Introduced admin_address and proxy-info-url
- *      as config parameters
- *    - Renamed config->proxy_args_invocation (which didn't have
- *      the invocation but the options!) to config->proxy_args
- *    - Various adaptions
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.16  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.15  2001/06/07 23:13:40  jongfoster
- *    Merging ACL and forward files into config file.
- *    Cosmetic: Sorting config file options alphabetically.
- *    Cosmetic: Adding brief syntax comments to config file options.
- *
- *    Revision 1.14  2001/06/07 14:46:25  joergs
- *    Missing make_path() added for re_filterfile.
- *
- *    Revision 1.13  2001/06/05 22:33:54  jongfoster
- *
- *    Fixed minor memory leak.
- *    Also now uses make_path to prepend the pathnames.
- *
- *    Revision 1.12  2001/06/05 20:04:09  jongfoster
- *    Now uses _snprintf() in place of snprintf() under Win32.
- *
- *    Revision 1.11  2001/06/04 18:31:58  swa
- *    files are now prefixed with either `confdir' or `logdir'.
- *    `make redhat-dist' replaces both entries confdir and logdir
- *    with redhat values
- *
- *    Revision 1.10  2001/06/03 19:11:54  oes
- *    introduced confdir option
- *
- *    Revision 1.9  2001/06/01 20:06:24  jongfoster
- *    Removed support for "tinygif" option - moved to actions file.
- *
- *    Revision 1.8  2001/05/31 21:27:13  jongfoster
- *    Removed many options from the config file and into the
- *    "actions" file: add_forwarded, suppress_vanilla_wafer,
- *    wafer, add_header, user_agent, referer, from
- *    Also globally replaced "permission" with "action".
- *
- *    Revision 1.7  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.6  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.5  2001/05/25 22:34:30  jongfoster
- *    Hard tabs->Spaces
- *
- *    Revision 1.4  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.3  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.2  2001/05/17 23:01:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:58  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <ctype.h>
-#include <assert.h>
-
-#ifdef _WIN32
-
-# ifndef STRICT
-#  define STRICT
-# endif
-# include <windows.h>
-
-# include "win32.h"
-# ifndef _WIN_CONSOLE
-#  include "w32log.h"
-# endif /* ndef _WIN_CONSOLE */
-
-#else /* ifndef _WIN32 */
-
-#ifndef __OS2__
-# include <unistd.h>
-# include <sys/wait.h>
-#endif
-# include <sys/time.h>
-# include <sys/stat.h>
-# include <signal.h>
-
-#endif
-
-#include "loadcfg.h"
-#include "list.h"
-#include "jcc.h"
-#include "filters.h"
-#include "loaders.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "ssplit.h"
-#include "encode.h"
-#include "urlmatch.h"
-#include "cgi.h"
-#include "gateway.h"
-
-const char loadcfg_h_rcs[] = LOADCFG_H_VERSION;
-
-/*
- * Fix a problem with Solaris.  There should be no effect on other
- * platforms.
- * Solaris's isspace() is a macro which uses it's argument directly
- * as an array index.  Therefore we need to make sure that high-bit
- * characters generate +ve values, and ideally we also want to make
- * the argument match the declared parameter type of "int".
- */
-#define ijb_isupper(__X) isupper((int)(unsigned char)(__X))
-#define ijb_tolower(__X) tolower((int)(unsigned char)(__X))
-
-#ifdef FEATURE_TOGGLE
-/* Privoxy is enabled by default. */
-int global_toggle_state = 1;
-#endif /* def FEATURE_TOGGLE */
-
-/* The filename of the configfile */
-const char *configfile  = NULL;
-
-/*
- * CGI functions will later need access to the invocation args,
- * so we will make argc and argv global.
- */
-int Argc = 0;
-const char **Argv = NULL;
-
-static struct file_list *current_configfile = NULL;
-
-
-/*
- * This takes the "cryptic" hash of each keyword and aliases them to
- * something a little more readable.  This also makes changing the
- * hash values easier if they should change or the hash algorthm changes.
- * Use the included "hash" program to find out what the hash will be
- * for any string supplied on the command line.  (Or just put it in the
- * config file and read the number from the error message in the log).
- *
- * Please keep this list sorted alphabetically (but with the Windows
- * console and GUI specific options last).
- */
-
-#define hash_actions_file                1196306641ul /* "actionsfile" */
-#define hash_accept_intercepted_requests 1513024973ul /* "accept-intercepted-requests" */
-#define hash_admin_address               4112573064ul /* "admin-address" */
-#define hash_allow_cgi_request_crunching  258915987ul /* "allow-cgi-request-crunching" */
-#define hash_buffer_limit                1881726070ul /* "buffer-limit */
-#define hash_confdir                        1978389ul /* "confdir" */
-#define hash_debug                            78263ul /* "debug" */
-#define hash_deny_access                 1227333715ul /* "deny-access" */
-#define hash_enable_edit_actions         2517097536ul /* "enable-edit-actions" */
-#define hash_enable_remote_toggle        2979744683ul /* "enable-remote-toggle" */
-#define hash_enable_remote_http_toggle    110543988ul /* "enable-remote-http-toggle" */
-#define hash_enforce_blocks              1862427469ul /* "enforce-blocks" */
-#define hash_filterfile                   250887266ul /* "filterfile" */
-#define hash_forward                        2029845ul /* "forward" */
-#define hash_forward_socks4              3963965521ul /* "forward-socks4" */
-#define hash_forward_socks4a             2639958518ul /* "forward-socks4a" */
-#define hash_forward_socks5              3963965522ul /* "forward-socks5" */
-#define hash_forwarded_connect_retries    101465292ul /* "forwarded-connect-retries" */
-#define hash_hostname                      10308071ul /* "hostname" */
-#define hash_keep_alive_timeout          3878599515ul /* "keep-alive-timeout" */
-#define hash_listen_address              1255650842ul /* "listen-address" */
-#define hash_logdir                          422889ul /* "logdir" */
-#define hash_logfile                        2114766ul /* "logfile" */
-#define hash_permit_access               3587953268ul /* "permit-access" */
-#define hash_proxy_info_url              3903079059ul /* "proxy-info-url" */
-#define hash_single_threaded             4250084780ul /* "single-threaded" */
-#define hash_socket_timeout              1809001761ul /* "socket-timeout" */
-#define hash_split_large_cgi_forms        671658948ul /* "split-large-cgi-forms" */
-#define hash_suppress_blocklists         1948693308ul /* "suppress-blocklists" */
-#define hash_templdir                      11067889ul /* "templdir" */
-#define hash_toggle                          447966ul /* "toggle" */
-#define hash_trust_info_url               430331967ul /* "trust-info-url" */
-#define hash_trustfile                     56494766ul /* "trustfile" */
-#define hash_usermanual                  1416668518ul /* "user-manual" */
-#define hash_activity_animation          1817904738ul /* "activity-animation" */
-#define hash_close_button_minimizes      3651284693ul /* "close-button-minimizes" */
-#define hash_hide_console                2048809870ul /* "hide-console" */
-#define hash_log_buffer_size             2918070425ul /* "log-buffer-size" */
-#define hash_log_font_name               2866730124ul /* "log-font-name" */
-#define hash_log_font_size               2866731014ul /* "log-font-size" */
-#define hash_log_highlight_messages      4032101240ul /* "log-highlight-messages" */
-#define hash_log_max_lines               2868344173ul /* "log-max-lines" */
-#define hash_log_messages                2291744899ul /* "log-messages" */
-#define hash_show_on_task_bar             215410365ul /* "show-on-task-bar" */
-
-
-static void savearg(char *command, char *argument, struct configuration_spec * config);
-
-/*********************************************************************
- *
- * Function    :  unload_configfile
- *
- * Description :  Free the config structure and all components.
- *
- * Parameters  :
- *          1  :  data: struct configuration_spec to unload
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void unload_configfile (void * data)
-{
-   struct configuration_spec * config = (struct configuration_spec *)data;
-   struct forward_spec *cur_fwd = config->forward;
-   int i;
-
-#ifdef FEATURE_ACL
-   struct access_control_list *cur_acl = config->acl;
-
-   while (cur_acl != NULL)
-   {
-      struct access_control_list * next_acl = cur_acl->next;
-      free(cur_acl);
-      cur_acl = next_acl;
-   }
-   config->acl = NULL;
-#endif /* def FEATURE_ACL */
-
-   while (cur_fwd != NULL)
-   {
-      struct forward_spec * next_fwd = cur_fwd->next;
-      free_url_spec(cur_fwd->url);
-
-      freez(cur_fwd->gateway_host);
-      freez(cur_fwd->forward_host);
-      free(cur_fwd);
-      cur_fwd = next_fwd;
-   }
-   config->forward = NULL;
-
-   freez(config->confdir);
-   freez(config->logdir);
-   freez(config->templdir);
-   freez(config->hostname);
-
-   freez(config->haddr);
-   freez(config->logfile);
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      freez(config->actions_file_short[i]);
-      freez(config->actions_file[i]);
-      freez(config->re_filterfile_short[i]);
-      freez(config->re_filterfile[i]);
-   }
-
-   freez(config->admin_address);
-   freez(config->proxy_info_url);
-   freez(config->proxy_args);
-   freez(config->usermanual);
-
-#ifdef FEATURE_TRUST
-   freez(config->trustfile);
-   list_remove_all(config->trust_info);
-#endif /* def FEATURE_TRUST */
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      freez(config->re_filterfile[i]);
-   }
-
-   freez(config);
-}
-
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-/*********************************************************************
- *
- * Function    :  unload_current_config_file
- *
- * Description :  Unloads current config file - reset to state at
- *                beginning of program.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void unload_current_config_file(void)
-{
-   if (current_configfile)
-   {
-      current_configfile->unloader = unload_configfile;
-      current_configfile = NULL;
-   }
-}
-#endif
-
-
-/*********************************************************************
- *
- * Function    :  load_config
- *
- * Description :  Load the config file and all parameters.
- *
- *                XXX: more than thousand lines long
- *                and thus in serious need of refactoring.
- *
- * Parameters  :  None
- *
- * Returns     :  The configuration_spec, or NULL on error.
- *
- *********************************************************************/
-struct configuration_spec * load_config(void)
-{
-   char buf[BUFFER_SIZE];
-   char *p, *q;
-   FILE *configfp = NULL;
-   struct configuration_spec * config = NULL;
-   struct client_state * fake_csp;
-   struct file_list *fs;
-   unsigned long linenum = 0;
-   int i;
-   char *logfile = NULL;
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   int keep_alive_timeout = DEFAULT_KEEP_ALIVE_TIMEOUT;
-#endif
-
-   if (!check_file_changed(current_configfile, configfile, &fs))
-   {
-      /* No need to load */
-      return ((struct configuration_spec *)current_configfile->f);
-   }
-   if (NULL == fs)
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "can't check configuration file '%s':  %E", configfile);
-      return NULL;
-   }
-
-   if (NULL != current_configfile)
-   {
-      log_error(LOG_LEVEL_INFO, "Reloading configuration file '%s'", configfile);
-   }
-
-#ifdef FEATURE_TOGGLE
-   global_toggle_state = 1;
-#endif /* def FEATURE_TOGGLE */
-
-   fs->f = config = (struct configuration_spec *)zalloc(sizeof(*config));
-
-   if (NULL == config)
-   {
-      freez(fs->filename);
-      freez(fs);
-      log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration");
-      return NULL;
-   }
-
-   /*
-    * This is backwards from how it's usually done.
-    * Following the usual pattern, "fs" would be stored in a member
-    * variable in "csp", and then we'd access "config" from "fs->f",
-    * using a cast.  However, "config" is used so often that a
-    * cast each time would be very ugly, and the extra indirection
-    * would waste CPU cycles.  Therefore we store "config" in
-    * "csp->config", and "fs" in "csp->config->config_file_list".
-    */
-   config->config_file_list = fs;
-
-   /*
-    * Set to defaults
-    */
-   config->multi_threaded            = 1;
-   config->hport                     = HADDR_PORT;
-   config->buffer_limit              = 4096 * 1024;
-   config->usermanual                = strdup(USER_MANUAL_URL);
-   config->proxy_args                = strdup("");
-   config->forwarded_connect_retries = 0;
-   config->socket_timeout            = 300; /* XXX: Should be a macro. */
-   config->feature_flags            &= ~RUNTIME_FEATURE_CGI_TOGGLE;
-   config->feature_flags            &= ~RUNTIME_FEATURE_SPLIT_LARGE_FORMS;
-   config->feature_flags            &= ~RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS;
-
-   configfp = fopen(configfile, "r");
-   if (NULL == configfp)
-   {
-      log_error(LOG_LEVEL_FATAL,
-         "can't open configuration file '%s':  %E", configfile);
-      /* Never get here - LOG_LEVEL_FATAL causes program exit */
-   }
-
-   while (read_config_line(buf, sizeof(buf), configfp, &linenum) != NULL)
-   {
-      char cmd[BUFFER_SIZE];
-      char arg[BUFFER_SIZE];
-      char tmp[BUFFER_SIZE];
-#ifdef FEATURE_ACL
-      struct access_control_list *cur_acl;
-#endif /* def FEATURE_ACL */
-      struct forward_spec *cur_fwd;
-      int vec_count;
-      char *vec[3];
-      unsigned long directive_hash;
-
-      strlcpy(tmp, buf, sizeof(tmp));
-
-      /* Copy command (i.e. up to space or tab) into cmd */
-      p = buf;
-      q = cmd;
-      while (*p && (*p != ' ') && (*p != '\t'))
-      {
-         *q++ = *p++;
-      }
-      *q = '\0';
-
-      /* Skip over the whitespace in buf */
-      while (*p && ((*p == ' ') || (*p == '\t')))
-      {
-         p++;
-      }
-
-      /* Copy the argument into arg */
-      strlcpy(arg, p, sizeof(arg));
-
-      /* Should never happen, but check this anyway */
-      if (*cmd == '\0')
-      {
-         continue;
-      }
-
-      /* Make sure the command field is lower case */
-      for (p = cmd; *p; p++)
-      {
-         if (ijb_isupper(*p))
-         {
-            *p = (char)ijb_tolower(*p);
-         }
-      }
-
-      directive_hash = hash_string(cmd);
-      switch (directive_hash)
-      {
-/* *************************************************************************
- * actionsfile actions-file-name
- * In confdir by default
- * *************************************************************************/
-         case hash_actions_file :
-            i = 0;
-            while ((i < MAX_AF_FILES) && (NULL != config->actions_file[i]))
-            {
-               i++;
-            }
-
-            if (i >= MAX_AF_FILES)
-            {
-               log_error(LOG_LEVEL_FATAL, "Too many 'actionsfile' directives in config file - limit is %d.\n"
-                  "(You can increase this limit by changing MAX_AF_FILES in project.h and recompiling).",
-                  MAX_AF_FILES);
-            }
-            config->actions_file_short[i] = strdup(arg);
-            config->actions_file[i] = make_path(config->confdir, arg);
-
-            break;
-/* *************************************************************************
- * accept-intercepted-requests
- * *************************************************************************/
-         case hash_accept_intercepted_requests:
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS;
-            }
-            break;
-
-/* *************************************************************************
- * admin-address email-address
- * *************************************************************************/
-         case hash_admin_address :
-            freez(config->admin_address);
-            config->admin_address = strdup(arg);
-            break;
-
-/* *************************************************************************
- * allow-cgi-request-crunching
- * *************************************************************************/
-         case hash_allow_cgi_request_crunching:
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_CGI_CRUNCHING;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_CGI_CRUNCHING;
-            }
-            break;
-
-/* *************************************************************************
- * buffer-limit n
- * *************************************************************************/
-         case hash_buffer_limit :
-            config->buffer_limit = (size_t)(1024 * atoi(arg));
-            break;
-
-/* *************************************************************************
- * confdir directory-name
- * *************************************************************************/
-         case hash_confdir :
-            freez(config->confdir);
-            config->confdir = make_path( NULL, arg);
-            break;
-
-/* *************************************************************************
- * debug n
- * Specifies debug level, multiple values are ORed together.
- * *************************************************************************/
-         case hash_debug :
-            config->debug |= atoi(arg);
-            break;
-
-/* *************************************************************************
- * deny-access source-ip[/significant-bits] [dest-ip[/significant-bits]]
- * *************************************************************************/
-#ifdef FEATURE_ACL
-         case hash_deny_access:
-            strlcpy(tmp, arg, sizeof(tmp));
-            vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1);
-
-            if ((vec_count != 1) && (vec_count != 2))
-            {
-               log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for "
-                     "deny-access directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Wrong number of parameters for "
-                  "deny-access directive in configuration file.<br><br>\n");
-               break;
-            }
-
-            /* allocate a new node */
-            cur_acl = (struct access_control_list *) zalloc(sizeof(*cur_acl));
-
-            if (cur_acl == NULL)
-            {
-               log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration");
-               /* Never get here - LOG_LEVEL_FATAL causes program exit */
-               break;
-            }
-            cur_acl->action = ACL_DENY;
-
-            if (acl_addr(vec[0], cur_acl->src) < 0)
-            {
-               log_error(LOG_LEVEL_ERROR, "Invalid source address, port or netmask "
-                  "for deny-access directive in configuration file: \"%s\"", vec[0]);
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Invalid source address, port or netmask "
-                  "for deny-access directive in configuration file: \"");
-               string_append(&config->proxy_args,
-                  vec[0]);
-               string_append(&config->proxy_args,
-                  "\"<br><br>\n");
-               freez(cur_acl);
-               break;
-            }
-            if (vec_count == 2)
-            {
-               if (acl_addr(vec[1], cur_acl->dst) < 0)
-               {
-                  log_error(LOG_LEVEL_ERROR, "Invalid destination address, port or netmask "
-                     "for deny-access directive in configuration file: \"%s\"", vec[1]);
-                  string_append(&config->proxy_args,
-                     "<br>\nWARNING: Invalid destination address, port or netmask "
-                     "for deny-access directive in configuration file: \"");
-                  string_append(&config->proxy_args,
-                     vec[1]);
-                  string_append(&config->proxy_args,
-                     "\"<br><br>\n");
-                  freez(cur_acl);
-                  break;
-               }
-            }
-
-            /*
-             * Add it to the list.  Note we reverse the list to get the
-             * behaviour the user expects.  With both the ACL and
-             * actions file, the last match wins.  However, the internal
-             * implementations are different:  The actions file is stored
-             * in the same order as the file, and scanned completely.
-             * With the ACL, we reverse the order as we load it, then
-             * when we scan it we stop as soon as we get a match.
-             */
-            cur_acl->next  = config->acl;
-            config->acl = cur_acl;
-
-            break;
-#endif /* def FEATURE_ACL */
-
-/* *************************************************************************
- * enable-edit-actions 0|1
- * *************************************************************************/
-#ifdef FEATURE_CGI_EDIT_ACTIONS
-         case hash_enable_edit_actions:
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_CGI_EDIT_ACTIONS;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_CGI_EDIT_ACTIONS;
-            }
-            break;
-#endif /* def FEATURE_CGI_EDIT_ACTIONS */
-
-/* *************************************************************************
- * enable-remote-toggle 0|1
- * *************************************************************************/
-#ifdef FEATURE_TOGGLE
-         case hash_enable_remote_toggle:
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_CGI_TOGGLE;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_CGI_TOGGLE;
-            }
-            break;
-#endif /* def FEATURE_TOGGLE */
-
-/* *************************************************************************
- * enable-remote-http-toggle 0|1
- * *************************************************************************/
-         case hash_enable_remote_http_toggle:
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_HTTP_TOGGLE;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_HTTP_TOGGLE;
-            }
-            break;
-
-/* *************************************************************************
- * enforce-blocks 0|1
- * *************************************************************************/
-         case hash_enforce_blocks:
-#ifdef FEATURE_FORCE_LOAD
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_ENFORCE_BLOCKS;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_ENFORCE_BLOCKS;
-            }
-#else
-            log_error(LOG_LEVEL_ERROR, "Ignoring directive 'enforce-blocks'. "
-               "FEATURE_FORCE_LOAD is disabled, blocks will always be enforced.");
-#endif /* def FEATURE_FORCE_LOAD */
-            break;
-
-/* *************************************************************************
- * filterfile file-name
- * In confdir by default.
- * *************************************************************************/
-         case hash_filterfile :
-            i = 0;
-            while ((i < MAX_AF_FILES) && (NULL != config->re_filterfile[i]))
-            {
-               i++;
-            }
-
-            if (i >= MAX_AF_FILES)
-            {
-               log_error(LOG_LEVEL_FATAL, "Too many 'filterfile' directives in config file - limit is %d.\n"
-                  "(You can increase this limit by changing MAX_AF_FILES in project.h and recompiling).",
-                  MAX_AF_FILES);
-            }
-            config->re_filterfile_short[i] = strdup(arg);
-            config->re_filterfile[i] = make_path(config->confdir, arg);
-
-            break;
-
-/* *************************************************************************
- * forward url-pattern (.|http-proxy-host[:port])
- * *************************************************************************/
-         case hash_forward:
-            strlcpy(tmp, arg, sizeof(tmp));
-            vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1);
-
-            if (vec_count != 2)
-            {
-               log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for forward "
-                     "directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Wrong number of parameters for "
-                  "forward directive in configuration file.");
-               break;
-            }
-
-            /* allocate a new node */
-            cur_fwd = zalloc(sizeof(*cur_fwd));
-            if (cur_fwd == NULL)
-            {
-               log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration");
-               /* Never get here - LOG_LEVEL_FATAL causes program exit */
-               break;
-            }
-
-            cur_fwd->type = SOCKS_NONE;
-
-            /* Save the URL pattern */
-            if (create_url_spec(cur_fwd->url, vec[0]))
-            {
-               log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward "
-                     "directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Bad URL specifier for "
-                  "forward directive in configuration file.");
-               break;
-            }
-
-            /* Parse the parent HTTP proxy host:port */
-            p = vec[1];
-
-            if (strcmp(p, ".") != 0)
-            {
-               cur_fwd->forward_host = strdup(p);
-
-               if (NULL != (p = strchr(cur_fwd->forward_host, ':')))
-               {
-                  *p++ = '\0';
-                  cur_fwd->forward_port = atoi(p);
-               }
-
-               if (cur_fwd->forward_port <= 0)
-               {
-                  cur_fwd->forward_port = 8000;
-               }
-            }
-
-            /* Add to list. */
-            cur_fwd->next = config->forward;
-            config->forward = cur_fwd;
-
-            break;
-
-/* *************************************************************************
- * forward-socks4 url-pattern socks-proxy[:port] (.|http-proxy[:port])
- * *************************************************************************/
-         case hash_forward_socks4:
-            strlcpy(tmp, arg, sizeof(tmp));
-            vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1);
-
-            if (vec_count != 3)
-            {
-               log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for "
-                     "forward-socks4 directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Wrong number of parameters for "
-                  "forward-socks4 directive in configuration file.");
-               break;
-            }
-
-            /* allocate a new node */
-            cur_fwd = zalloc(sizeof(*cur_fwd));
-            if (cur_fwd == NULL)
-            {
-               log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration");
-               /* Never get here - LOG_LEVEL_FATAL causes program exit */
-               break;
-            }
-
-            cur_fwd->type = SOCKS_4;
-
-            /* Save the URL pattern */
-            if (create_url_spec(cur_fwd->url, vec[0]))
-            {
-               log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward-socks4 "
-                     "directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Bad URL specifier for "
-                  "forward-socks4 directive in configuration file.");
-               break;
-            }
-
-            /* Parse the SOCKS proxy host[:port] */
-            p = vec[1];
-
-            if (strcmp(p, ".") != 0)
-            {
-               cur_fwd->gateway_host = strdup(p);
-
-               if (NULL != (p = strchr(cur_fwd->gateway_host, ':')))
-               {
-                  *p++ = '\0';
-                  cur_fwd->gateway_port = atoi(p);
-               }
-               if (cur_fwd->gateway_port <= 0)
-               {
-                  cur_fwd->gateway_port = 1080;
-               }
-            }
-
-            /* Parse the parent HTTP proxy host[:port] */
-            p = vec[2];
-
-            if (strcmp(p, ".") != 0)
-            {
-               cur_fwd->forward_host = strdup(p);
-
-               if (NULL != (p = strchr(cur_fwd->forward_host, ':')))
-               {
-                  *p++ = '\0';
-                  cur_fwd->forward_port = atoi(p);
-               }
-
-               if (cur_fwd->forward_port <= 0)
-               {
-                  cur_fwd->forward_port = 8000;
-               }
-            }
-
-            /* Add to list. */
-            cur_fwd->next = config->forward;
-            config->forward = cur_fwd;
-
-            break;
-
-/* *************************************************************************
- * forward-socks4a url-pattern socks-proxy[:port] (.|http-proxy[:port])
- * *************************************************************************/
-         case hash_forward_socks4a:
-         case hash_forward_socks5:
-            strlcpy(tmp, arg, sizeof(tmp));
-            vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1);
-
-            if (vec_count != 3)
-            {
-               log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for "
-                     "forward-socks4a directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Wrong number of parameters for "
-                  "forward-socks4a directive in configuration file.");
-               break;
-            }
-
-            /* allocate a new node */
-            cur_fwd = zalloc(sizeof(*cur_fwd));
-            if (cur_fwd == NULL)
-            {
-               log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration");
-               /* Never get here - LOG_LEVEL_FATAL causes program exit */
-               break;
-            }
-
-            if (directive_hash == hash_forward_socks4a)
-            {
-               cur_fwd->type = SOCKS_4A;
-            }
-            else
-            {
-               cur_fwd->type = SOCKS_5;
-            }
-
-            /* Save the URL pattern */
-            if (create_url_spec(cur_fwd->url, vec[0]))
-            {
-               log_error(LOG_LEVEL_ERROR, "Bad URL specifier for forward-socks4a "
-                     "directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Bad URL specifier for "
-                  "forward-socks4a directive in configuration file.");
-               break;
-            }
-
-            /* Parse the SOCKS proxy host[:port] */
-            p = vec[1];
-
-            cur_fwd->gateway_host = strdup(p);
-
-            if (NULL != (p = strchr(cur_fwd->gateway_host, ':')))
-            {
-               *p++ = '\0';
-               cur_fwd->gateway_port = atoi(p);
-            }
-            if (cur_fwd->gateway_port <= 0)
-            {
-               cur_fwd->gateway_port = 1080;
-            }
-
-            /* Parse the parent HTTP proxy host[:port] */
-            p = vec[2];
-
-            if (strcmp(p, ".") != 0)
-            {
-               cur_fwd->forward_host = strdup(p);
-
-               if (NULL != (p = strchr(cur_fwd->forward_host, ':')))
-               {
-                  *p++ = '\0';
-                  cur_fwd->forward_port = atoi(p);
-               }
-
-               if (cur_fwd->forward_port <= 0)
-               {
-                  cur_fwd->forward_port = 8000;
-               }
-            }
-
-            /* Add to list. */
-            cur_fwd->next = config->forward;
-            config->forward = cur_fwd;
-
-            break;
-
-/* *************************************************************************
- * forwarded-connect-retries n
- * *************************************************************************/
-         case hash_forwarded_connect_retries :
-            config->forwarded_connect_retries = atoi(arg);
-            break;
-
-/* *************************************************************************
- * hostname hostname-to-show-on-cgi-pages
- * *************************************************************************/
-         case hash_hostname :
-            freez(config->hostname);
-            config->hostname = strdup(arg);
-            if (NULL == config->hostname)
-            {
-               log_error(LOG_LEVEL_FATAL, "Out of memory saving hostname.");
-            }
-            break;
-
-/* *************************************************************************
- * keep-alive-timeout timeout
- * *************************************************************************/
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-         case hash_keep_alive_timeout :
-            if (*arg != '\0')
-            {
-               int timeout = atoi(arg);
-               if (0 <= timeout)
-               {
-                  config->feature_flags |= RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE;
-                  keep_alive_timeout = timeout;
-               }
-               else
-               {
-                  config->feature_flags &= ~RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE;
-               }
-            }
-            break;
-#endif
-
-/* *************************************************************************
- * listen-address [ip][:port]
- * *************************************************************************/
-         case hash_listen_address :
-            freez(config->haddr);
-            config->haddr = strdup(arg);
-            break;
-
-/* *************************************************************************
- * logdir directory-name
- * *************************************************************************/
-         case hash_logdir :
-            freez(config->logdir);
-            config->logdir = make_path(NULL, arg);
-            break;
-
-/* *************************************************************************
- * logfile log-file-name
- * In logdir by default
- * *************************************************************************/
-         case hash_logfile :
-            if (!no_daemon)
-            {
-               logfile = make_path(config->logdir, arg);
-               if (NULL == logfile)
-               {
-                  log_error(LOG_LEVEL_FATAL, "Out of memory while creating logfile path");
-               }
-            }
-            break;
-
-/* *************************************************************************
- * permit-access source-ip[/significant-bits] [dest-ip[/significant-bits]]
- * *************************************************************************/
-#ifdef FEATURE_ACL
-         case hash_permit_access:
-            strlcpy(tmp, arg, sizeof(tmp));
-            vec_count = ssplit(tmp, " \t", vec, SZ(vec), 1, 1);
-
-            if ((vec_count != 1) && (vec_count != 2))
-            {
-               log_error(LOG_LEVEL_ERROR, "Wrong number of parameters for "
-                     "permit-access directive in configuration file.");
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Wrong number of parameters for "
-                  "permit-access directive in configuration file.<br><br>\n");
-
-               break;
-            }
-
-            /* allocate a new node */
-            cur_acl = (struct access_control_list *) zalloc(sizeof(*cur_acl));
-
-            if (cur_acl == NULL)
-            {
-               log_error(LOG_LEVEL_FATAL, "can't allocate memory for configuration");
-               /* Never get here - LOG_LEVEL_FATAL causes program exit */
-               break;
-            }
-            cur_acl->action = ACL_PERMIT;
-
-            if (acl_addr(vec[0], cur_acl->src) < 0)
-            {
-               log_error(LOG_LEVEL_ERROR, "Invalid source address, port or netmask "
-                  "for permit-access directive in configuration file: \"%s\"", vec[0]);
-               string_append(&config->proxy_args,
-                  "<br>\nWARNING: Invalid source address, port or netmask for "
-                  "permit-access directive in configuration file: \"");
-               string_append(&config->proxy_args,
-                  vec[0]);
-               string_append(&config->proxy_args,
-                  "\"<br><br>\n");
-               freez(cur_acl);
-               break;
-            }
-            if (vec_count == 2)
-            {
-               if (acl_addr(vec[1], cur_acl->dst) < 0)
-               {
-                  log_error(LOG_LEVEL_ERROR, "Invalid destination address, port or netmask "
-                     "for permit-access directive in configuration file: \"%s\"", vec[1]);
-                  string_append(&config->proxy_args,
-                     "<br>\nWARNING: Invalid destination address, port or netmask for "
-                     "permit-access directive in configuration file: \"");
-                  string_append(&config->proxy_args,
-                     vec[1]);
-                  string_append(&config->proxy_args,
-                     "\"<br><br>\n");
-                  freez(cur_acl);
-                  break;
-               }
-            }
-
-            /*
-             * Add it to the list.  Note we reverse the list to get the
-             * behaviour the user expects.  With both the ACL and
-             * actions file, the last match wins.  However, the internal
-             * implementations are different:  The actions file is stored
-             * in the same order as the file, and scanned completely.
-             * With the ACL, we reverse the order as we load it, then
-             * when we scan it we stop as soon as we get a match.
-             */
-            cur_acl->next  = config->acl;
-            config->acl = cur_acl;
-
-            break;
-#endif /* def FEATURE_ACL */
-
-/* *************************************************************************
- * proxy-info-url url
- * *************************************************************************/
-         case hash_proxy_info_url :
-            freez(config->proxy_info_url);
-            config->proxy_info_url = strdup(arg);
-            break;
-
-/* *************************************************************************
- * single-threaded
- * *************************************************************************/
-         case hash_single_threaded :
-            config->multi_threaded = 0;
-            break;
-
-/* *************************************************************************
- * socket-timeout numer_of_seconds
- * *************************************************************************/
-         case hash_socket_timeout :
-            if (*arg != '\0')
-            {
-               int socket_timeout = atoi(arg);
-               if (0 < socket_timeout)
-               {
-                  config->socket_timeout = socket_timeout;
-               }
-               else
-               {
-                  log_error(LOG_LEVEL_FATAL,
-                     "Invalid socket-timeout: '%s'", arg);
-               }
-            }
-            break;
-
-/* *************************************************************************
- * split-large-cgi-forms
- * *************************************************************************/
-         case hash_split_large_cgi_forms :
-            if ((*arg != '\0') && (0 != atoi(arg)))
-            {
-               config->feature_flags |= RUNTIME_FEATURE_SPLIT_LARGE_FORMS;
-            }
-            else
-            {
-               config->feature_flags &= ~RUNTIME_FEATURE_SPLIT_LARGE_FORMS;
-            }
-            break;
-
-/* *************************************************************************
- * templdir directory-name
- * *************************************************************************/
-         case hash_templdir :
-            freez(config->templdir);
-            config->templdir = make_path(NULL, arg);
-            break;
-
-/* *************************************************************************
- * toggle (0|1)
- * *************************************************************************/
-#ifdef FEATURE_TOGGLE
-         case hash_toggle :
-            global_toggle_state = atoi(arg);
-            break;
-#endif /* def FEATURE_TOGGLE */
-
-/* *************************************************************************
- * trust-info-url url
- * *************************************************************************/
-#ifdef FEATURE_TRUST
-         case hash_trust_info_url :
-            enlist(config->trust_info, arg);
-            break;
-#endif /* def FEATURE_TRUST */
-
-/* *************************************************************************
- * trustfile filename
- * (In confdir by default.)
- * *************************************************************************/
-#ifdef FEATURE_TRUST
-         case hash_trustfile :
-            freez(config->trustfile);
-            config->trustfile = make_path(config->confdir, arg);
-            break;
-#endif /* def FEATURE_TRUST */
-
-/* *************************************************************************
- * usermanual url
- * *************************************************************************/
-         case hash_usermanual :
-            /*
-             * XXX: If this isn't the first config directive, the
-             * show-status page links to the website documentation
-             * for the directives that were already parsed. Lame.
-             */
-            freez(config->usermanual);
-            config->usermanual = strdup(arg);
-            break;
-
-/* *************************************************************************
- * Win32 Console options:
- * *************************************************************************/
-
-/* *************************************************************************
- * hide-console
- * *************************************************************************/
-#ifdef _WIN_CONSOLE
-         case hash_hide_console :
-            hideConsole = 1;
-            break;
-#endif /*def _WIN_CONSOLE*/
-
-
-/* *************************************************************************
- * Win32 GUI options:
- * *************************************************************************/
-
-#if defined(_WIN32) && ! defined(_WIN_CONSOLE)
-/* *************************************************************************
- * activity-animation (0|1)
- * *************************************************************************/
-         case hash_activity_animation :
-            g_bShowActivityAnimation = atoi(arg);
-            break;
-
-/* *************************************************************************
- *  close-button-minimizes (0|1)
- * *************************************************************************/
-         case hash_close_button_minimizes :
-            g_bCloseHidesWindow = atoi(arg);
-            break;
-
-/* *************************************************************************
- * log-buffer-size (0|1)
- * *************************************************************************/
-         case hash_log_buffer_size :
-            g_bLimitBufferSize = atoi(arg);
-            break;
-
-/* *************************************************************************
- * log-font-name fontname
- * *************************************************************************/
-         case hash_log_font_name :
-            if (strlcpy(g_szFontFaceName, arg,
-                   sizeof(g_szFontFaceName)) >= sizeof(g_szFontFaceName))
-            {
-               log_error(LOG_LEVEL_FATAL,
-                  "log-font-name argument '%s' is longer than %u characters.",
-                  arg, sizeof(g_szFontFaceName)-1);
-            }
-            break;
-
-/* *************************************************************************
- * log-font-size n
- * *************************************************************************/
-         case hash_log_font_size :
-            g_nFontSize = atoi(arg);
-            break;
-
-/* *************************************************************************
- * log-highlight-messages (0|1)
- * *************************************************************************/
-         case hash_log_highlight_messages :
-            g_bHighlightMessages = atoi(arg);
-            break;
-
-/* *************************************************************************
- * log-max-lines n
- * *************************************************************************/
-         case hash_log_max_lines :
-            g_nMaxBufferLines = atoi(arg);
-            break;
-
-/* *************************************************************************
- * log-messages (0|1)
- * *************************************************************************/
-         case hash_log_messages :
-            g_bLogMessages = atoi(arg);
-            break;
-
-/* *************************************************************************
- * show-on-task-bar (0|1)
- * *************************************************************************/
-         case hash_show_on_task_bar :
-            g_bShowOnTaskBar = atoi(arg);
-            break;
-
-#endif /* defined(_WIN32) && ! defined(_WIN_CONSOLE) */
-
-
-/* *************************************************************************
- * Warnings about unsupported features
- * *************************************************************************/
-#ifndef FEATURE_ACL
-         case hash_deny_access:
-#endif /* ndef FEATURE_ACL */
-#ifndef FEATURE_CGI_EDIT_ACTIONS
-         case hash_enable_edit_actions:
-#endif /* ndef FEATURE_CGI_EDIT_ACTIONS */
-#ifndef FEATURE_TOGGLE
-         case hash_enable_remote_toggle:
-#endif /* ndef FEATURE_TOGGLE */
-#ifndef FEATURE_ACL
-         case hash_permit_access:
-#endif /* ndef FEATURE_ACL */
-#ifndef FEATURE_TOGGLE
-         case hash_toggle :
-#endif /* ndef FEATURE_TOGGLE */
-#ifndef FEATURE_TRUST
-         case hash_trustfile :
-         case hash_trust_info_url :
-#endif /* ndef FEATURE_TRUST */
-
-#ifndef _WIN_CONSOLE
-         case hash_hide_console :
-#endif /* ndef _WIN_CONSOLE */
-
-#if defined(_WIN_CONSOLE) || ! defined(_WIN32)
-         case hash_activity_animation :
-         case hash_close_button_minimizes :
-         case hash_log_buffer_size :
-         case hash_log_font_name :
-         case hash_log_font_size :
-         case hash_log_highlight_messages :
-         case hash_log_max_lines :
-         case hash_log_messages :
-         case hash_show_on_task_bar :
-#endif /* defined(_WIN_CONSOLE) || ! defined(_WIN32) */
-            /* These warnings are annoying - so hide them. -- Jon */
-            /* log_error(LOG_LEVEL_INFO, "Unsupported directive \"%s\" ignored.", cmd); */
-            break;
-
-/* *************************************************************************/
-         default :
-/* *************************************************************************/
-            /*
-             * I decided that I liked this better as a warning than an
-             * error.  To change back to an error, just change log level
-             * to LOG_LEVEL_FATAL.
-             */
-            log_error(LOG_LEVEL_ERROR, "Ignoring unrecognized directive '%s' (%luul) in line %lu "
-                  "in configuration file (%s).",  buf, directive_hash, linenum, configfile);
-            string_append(&config->proxy_args,
-               " <strong class='warning'>Warning: Ignoring unrecognized directive:</strong>");
-            break;
-
-/* *************************************************************************/
-      } /* end switch( hash_string(cmd) ) */
-
-      /* Save the argument for the show-status page. */
-      savearg(cmd, arg, config);
-
-   } /* end while ( read_config_line(...) ) */
-
-   fclose(configfp);
-
-   set_debug_level(config->debug);
-
-   freez(config->logfile);
-
-   if (!no_daemon)
-   {
-      if (NULL != logfile)
-      {
-         config->logfile = logfile;
-         init_error_log(Argv[0], config->logfile);
-      }
-      else
-      {
-         disable_logging();
-      }
-   }
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   if (config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
-   {
-      if (config->multi_threaded)
-      {
-         set_keep_alive_timeout(keep_alive_timeout);
-      }
-      else
-      {
-         /*
-          * While we could use keep-alive without multiple threads
-          * if we didn't bother with enforcing the connection timeout,
-          * that might make Tor users sad, even though they shouldn't
-          * enable the single-threaded option anyway.
-          */
-         config->feature_flags &= ~RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE;
-         log_error(LOG_LEVEL_ERROR,
-            "Config option single-threaded disables connection keep-alive.");
-      }
-   }
-#endif
-
-   if (NULL == config->proxy_args)
-   {
-      log_error(LOG_LEVEL_FATAL, "Out of memory loading config - insufficient memory for config->proxy_args");
-   }
-
-   if (config->actions_file[0])
-   {
-      add_loader(load_action_files, config);
-   }
-
-   if (config->re_filterfile[0])
-   {
-      add_loader(load_re_filterfiles, config);
-   }
-
-#ifdef FEATURE_TRUST
-   if (config->trustfile)
-   {
-      add_loader(load_trustfile, config);
-   }
-#endif /* def FEATURE_TRUST */
-
-   if ( NULL == config->haddr )
-   {
-      config->haddr = strdup( HADDR_DEFAULT );
-   }
-
-   if ( NULL != config->haddr )
-   {
-      if (NULL != (p = strchr(config->haddr, ':')))
-      {
-         *p++ = '\0';
-         if (*p)
-         {
-            config->hport = atoi(p);
-         }
-      }
-
-      if (config->hport <= 0)
-      {
-         *--p = ':';
-         log_error(LOG_LEVEL_FATAL, "invalid bind port spec %s", config->haddr);
-         /* Never get here - LOG_LEVEL_FATAL causes program exit */
-      }
-      if (*config->haddr == '\0')
-      {
-         /*
-          * Only the port specified. We stored it in config->hport
-          * and don't need its text representation anymore.
-          */
-         freez(config->haddr);
-      }
-   }
-
-   /*
-    * Want to run all the loaders once now.
-    *
-    * Need to set up a fake csp, so they can get to the config.
-    */
-   fake_csp = (struct client_state *) zalloc (sizeof(*fake_csp));
-   fake_csp->config = config;
-
-   if (run_loader(fake_csp))
-   {
-      freez(fake_csp);
-      log_error(LOG_LEVEL_FATAL, "A loader failed while loading config file. Exiting.");
-      /* Never get here - LOG_LEVEL_FATAL causes program exit */
-   }
-   freez(fake_csp);
-
-/* FIXME: this is a kludge for win32 */
-#if defined(_WIN32) && !defined (_WIN_CONSOLE)
-
-   g_default_actions_file = config->actions_file[1]; /* FIXME Hope this is default.action */
-   g_user_actions_file = config->actions_file[2]; /* FIXME Hope this is user.action */
-   g_re_filterfile    = config->re_filterfile[0]; /* FIXME Hope this is default.filter */
-
-#ifdef FEATURE_TRUST
-   g_trustfile        = config->trustfile;
-#endif /* def FEATURE_TRUST */
-
-
-#endif /* defined(_WIN32) && !defined (_WIN_CONSOLE) */
-/* FIXME: end kludge */
-
-
-   config->need_bind = 1;
-
-   if (current_configfile)
-   {
-      struct configuration_spec * oldcfg = (struct configuration_spec *)
-                                           current_configfile->f;
-      /*
-       * Check if config->haddr,hport == oldcfg->haddr,hport
-       *
-       * The following could be written more compactly as a single,
-       * (unreadably long) if statement.
-       */
-      config->need_bind = 0;
-      if (config->hport != oldcfg->hport)
-      {
-         config->need_bind = 1;
-      }
-      else if (config->haddr == NULL)
-      {
-         if (oldcfg->haddr != NULL)
-         {
-            config->need_bind = 1;
-         }
-      }
-      else if (oldcfg->haddr == NULL)
-      {
-         config->need_bind = 1;
-      }
-      else if (0 != strcmp(config->haddr, oldcfg->haddr))
-      {
-         config->need_bind = 1;
-      }
-
-      current_configfile->unloader = unload_configfile;
-   }
-
-   fs->next = files->next;
-   files->next = fs;
-
-   current_configfile = fs;
-
-   return (config);
-}
-
-
-/*********************************************************************
- *
- * Function    :  savearg
- *
- * Description :  Called from `load_config'.  It saves each non-empty
- *                and non-comment line from config into
- *                config->proxy_args.  This is used to create the
- *                show-proxy-args page.  On error, frees
- *                config->proxy_args and sets it to NULL
- *
- * Parameters  :
- *          1  :  command = config setting that was found
- *          2  :  argument = the setting's argument (if any)
- *          3  :  config = Configuration to save into.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void savearg(char *command, char *argument, struct configuration_spec * config)
-{
-   char * buf;
-   char * s;
-
-   assert(command);
-   assert(argument);
-
-   /*
-    * Add config option name embedded in
-    * link to its section in the user-manual
-    */
-   buf = strdup("\n<a href=\"");
-   if (!strncmpic(config->usermanual, "file://", 7) ||
-       !strncmpic(config->usermanual, "http", 4))
-   {
-      string_append(&buf, config->usermanual);
-   }
-   else
-   {
-      string_append(&buf, "http://"; CGI_SITE_2_HOST "/user-manual/");
-   }
-   string_append(&buf, CONFIG_HELP_PREFIX);
-   string_join  (&buf, string_toupper(command));
-   string_append(&buf, "\">");
-   string_append(&buf, command);
-   string_append(&buf, "</a> ");
-
-   if (NULL == buf)
-   {
-      freez(config->proxy_args);
-      return;
-   }
-
-   if ( (NULL != argument) && ('\0' != *argument) )
-   {
-      s = html_encode(argument);
-      if (NULL == s)
-      {
-         freez(buf);
-         freez(config->proxy_args);
-         return;
-      }
-
-      if (strncmpic(argument, "http://";, 7) == 0)
-      {
-         string_append(&buf, "<a href=\"");
-         string_append(&buf, s);
-         string_append(&buf, "\">");
-         string_join  (&buf, s);
-         string_append(&buf, "</a>");
-      }
-      else
-      {
-         string_join  (&buf, s);
-      }
-   }
-
-   string_append(&buf, "<br>");
-   string_join(&config->proxy_args, buf);
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/loadcfg.h b/external/privoxy/loadcfg.h
deleted file mode 100644
index 80fc184..0000000
--- a/external/privoxy/loadcfg.h
+++ /dev/null
@@ -1,199 +0,0 @@
-#ifndef LOADCFG_H_INCLUDED
-#define LOADCFG_H_INCLUDED
-#define LOADCFG_H_VERSION "$Id: loadcfg.h,v 1.13 2006/07/18 14:48:46 david__schmidt Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/loadcfg.h,v $
- *
- * Purpose     :  Loads settings from the configuration file into
- *                global variables.  This file contains both the 
- *                routine to load the configuration and the global
- *                variables it writes to.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: loadcfg.h,v $
- *    Revision 1.13  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.11.2.1  2003/03/11 11:53:59  oes
- *    Cosmetic: Renamed cryptic variable
- *
- *    Revision 1.11  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.10  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.9  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.8  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.7  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.6  2001/07/29 18:58:15  jongfoster
- *    Removing nested #includes, adding forward declarations for needed
- *    structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED.
- *
- *    Revision 1.5  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.4  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.3  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.2  2001/05/17 23:01:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:58  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Don't need project.h, only this: */
-struct configuration_spec;
-
-/* Global variables */
-
-#ifdef FEATURE_TOGGLE
-/* Privoxy's toggle state */
-extern int global_toggle_state;
-#endif /* def FEATURE_TOGGLE */
-
-extern const char *configfile;
-
-
-/* The load_config function is now going to call:
- * init_proxy_args, so it will need argc and argv.
- * Since load_config will also be a signal handler,
- * we need to have these globally available.
- */
-extern int Argc;
-extern const char **Argv;
-extern short int MustReload;
-
-
-extern struct configuration_spec * load_config(void);
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-void unload_current_config_file(void);
-#endif
-
-/* Revision control strings from this header and associated .c file */
-extern const char loadcfg_rcs[];
-extern const char loadcfg_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef LOADCFG_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/loaders.c b/external/privoxy/loaders.c
deleted file mode 100644
index b796634..0000000
--- a/external/privoxy/loaders.c
+++ /dev/null
@@ -1,1762 +0,0 @@
-const char loaders_rcs[] = "$Id: loaders.c,v 1.71 2009/03/04 18:24:47 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/loaders.c,v $
- *
- * Purpose     :  Functions to load and unload the various
- *                configuration files.  Also contains code to manage
- *                the list of active loaders, and to automatically
- *                unload files that are no longer in use.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: loaders.c,v $
- *    Revision 1.71  2009/03/04 18:24:47  fabiankeil
- *    No need to create empty strings manually, strdup("") FTW.
- *
- *    Revision 1.70  2009/03/01 18:34:24  fabiankeil
- *    Help clang understand that we aren't dereferencing
- *    NULL pointers here.
- *
- *    Revision 1.69  2008/09/21 13:36:52  fabiankeil
- *    If change-x-forwarded-for{add} is used and the client
- *    sends multiple X-Forwarded-For headers, append the client's
- *    IP address to each one of them. "Traditionally" we would
- *    lose all but the last one.
- *
- *    Revision 1.68  2008/09/19 15:26:28  fabiankeil
- *    Add change-x-forwarded-for{} action to block or add
- *    X-Forwarded-For headers. Mostly based on code removed
- *    before 3.0.7.
- *
- *    Revision 1.67  2008/03/30 14:52:08  fabiankeil
- *    Rename load_actions_file() and load_re_filterfile()
- *    as they load multiple files "now".
- *
- *    Revision 1.66  2008/03/21 11:16:30  fabiankeil
- *    Garbage-collect csp->my_ip_addr_str and csp->my_hostname.
- *
- *    Revision 1.65  2007/12/07 18:29:23  fabiankeil
- *    Remove now-obsolete csp member x_forwarded.
- *
- *    Revision 1.64  2007/06/01 14:12:38  fabiankeil
- *    Add unload_forward_spec() in preparation for forward-override{}.
- *
- *    Revision 1.63  2007/05/14 10:41:15  fabiankeil
- *    Ditch the csp member cookie_list[] which isn't used anymore.
- *
- *    Revision 1.62  2007/04/30 15:02:18  fabiankeil
- *    Introduce dynamic pcrs jobs that can resolve variables.
- *
- *    Revision 1.61  2007/04/15 16:39:21  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.60  2007/03/20 15:16:34  fabiankeil
- *    Use dedicated header filter actions instead of abusing "filter".
- *    Replace "filter-client-headers" and "filter-client-headers"
- *    with "server-header-filter" and "client-header-filter".
- *
- *    Revision 1.59  2007/01/25 13:38:20  fabiankeil
- *    Freez csp->error_message in sweep().
- *
- *    Revision 1.58  2006/12/31 14:25:20  fabiankeil
- *    Fix gcc43 compiler warnings.
- *
- *    Revision 1.57  2006/12/21 12:22:22  fabiankeil
- *    html_encode filter descriptions.
- *
- *    Have "Ignoring job ..." error messages
- *    print the filter file name correctly.
- *
- *    Revision 1.56  2006/09/07 10:40:30  fabiankeil
- *    Turns out trusted referrers above our arbitrary
- *    limit are downgraded too ordinary trusted URLs.
- *    Adjusted error message.
- *
- *    Revision 1.55  2006/09/07 10:25:39  fabiankeil
- *    Fix typo.
- *
- *    Revision 1.54  2006/09/07 10:22:20  fabiankeil
- *    If too many trusted referrers are used,
- *    print only one error message instead of logging
- *    every single trusted referrer above the arbitrary
- *    limit.
- *
- *    Revision 1.53  2006/08/31 16:25:06  fabiankeil
- *    Work around a buffer overflow that caused Privoxy to
- *    segfault if too many trusted referrers were used. Good
- *    enough for now, but should be replaced with a real
- *    solution after the next release.
- *
- *    Revision 1.52  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.50.2.8  2006/01/30 15:16:25  david__schmidt
- *    Remove a little residual debugging info
- *
- *    Revision 1.50.2.7  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.50.2.6  2003/10/24 10:17:54  oes
- *    Nit: Allowed tabs as separators in filter headings
- *
- *    Revision 1.50.2.5  2003/05/08 15:19:15  oes
- *    sweep: Made loop structure of sweep step mirror that of mark step
- *
- *    Revision 1.50.2.4  2003/05/06 15:57:12  oes
- *    Bugfix: Update last_active pointer in sweep() before
- *    leaving an active client. Closes bugs #724395, #727882
- *
- *    Revision 1.50.2.3  2002/11/20 17:12:30  oes
- *    Ooops, forgot one change.
- *
- *    Revision 1.50.2.2  2002/11/20 14:38:15  oes
- *    Fixed delayed/incomplete freeing of client resources and
- *    simplified loop structure in sweep.
- *    Thanks to Oliver Stoeneberg for the hint.
- *
- *    Revision 1.50.2.1  2002/07/26 15:19:24  oes
- *    - PCRS jobs now chained in order of appearance. Previous
- *      reverse chaining was counter-intuitive.
- *    - Changed loglevel of PCRS job compile errors to
- *      LOG_LEVEL_ERROR
- *
- *    Revision 1.50  2002/04/24 02:12:16  oes
- *    Jon's multiple AF patch: Sweep now takes care of all AFs
- *
- *    Revision 1.49  2002/04/19 16:53:25  jongfoster
- *    Optimize away a function call by using an equivalent macro
- *
- *    Revision 1.48  2002/04/05 00:56:09  gliptak
- *    Correcting typo to clean up on realloc failure
- *
- *    Revision 1.47  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.46  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.45  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.44  2002/03/16 21:51:00  jongfoster
- *    Fixing free(NULL).
- *
- *    Revision 1.43  2002/03/16 20:28:34  oes
- *    Added descriptions to the filters so users will know what they select in the cgi editor
- *
- *    Revision 1.42  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.41  2002/03/12 01:42:50  oes
- *    Introduced modular filters
- *
- *    Revision 1.40  2002/03/08 17:46:04  jongfoster
- *    Fixing int/size_t warnings
- *
- *    Revision 1.39  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.38  2002/03/06 22:54:35  jongfoster
- *    Automated function-comment nitpicking.
- *
- *    Revision 1.37  2002/03/03 15:07:49  oes
- *    Re-enabled automatic config reloading
- *
- *    Revision 1.36  2002/01/22 23:46:18  jongfoster
- *    Moving edit_read_line() and simple_read_line() to loaders.c, and
- *    extending them to support reading MS-DOS, Mac and UNIX style files
- *    on all platforms.
- *
- *    Modifying read_config_line() (without changing it's prototype) to
- *    be a trivial wrapper for edit_read_line().  This means that we have
- *    one function to read a line and handle comments, which is common
- *    between the initialization code and the edit interface.
- *
- *    Revision 1.35  2002/01/17 21:03:08  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Revision 1.34  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.33  2001/11/13 00:16:38  jongfoster
- *    Replacing references to malloc.h with the standard stdlib.h
- *    (See ANSI or K&R 2nd Ed)
- *
- *    Revision 1.32  2001/11/07 00:02:13  steudten
- *    Add line number in error output for lineparsing for
- *    actionsfile and configfile.
- *    Special handling for CLF added.
- *
- *    Revision 1.31  2001/10/26 17:39:01  oes
- *    Removed csp->referrer
- *    Moved ijb_isspace and ijb_tolower to project.h
- *
- *    Revision 1.30  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.29  2001/10/23 21:38:53  jongfoster
- *    Adding error-checking to create_url_spec()
- *
- *    Revision 1.28  2001/10/07 15:40:39  oes
- *    Replaced 6 boolean members of csp with one bitmap (csp->flags)
- *
- *    Revision 1.27  2001/09/22 16:36:59  jongfoster
- *    Removing unused parameter fs from read_config_line()
- *
- *    Revision 1.26  2001/09/22 14:05:22  jongfoster
- *    Bugfix: Multiple escaped "#" characters in a configuration
- *    file are now permitted.
- *    Also removing 3 unused headers.
- *
- *    Revision 1.25  2001/09/13 22:44:03  jongfoster
- *    Adding {} to an if statement
- *
- *    Revision 1.24  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.23  2001/07/20 15:51:54  oes
- *    Fixed indentation of prepocessor commands
- *
- *    Revision 1.22  2001/07/20 15:16:17  haroon
- *    - per Guy's suggestion, added a while loop in sweep() to catch not just
- *      the last inactive CSP but all other consecutive inactive CSPs after that
- *      as well
- *
- *    Revision 1.21  2001/07/18 17:26:24  oes
- *    Changed to conform to new pcrs interface
- *
- *    Revision 1.20  2001/07/17 13:07:01  oes
- *    Fixed segv when last line in config files
- *     lacked a terminating (\r)\n
- *
- *    Revision 1.19  2001/07/13 14:01:54  oes
- *    Removed all #ifdef PCRS
- *
- *    Revision 1.18  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.17  2001/06/29 13:31:51  oes
- *    Various adaptions
- *
- *    Revision 1.16  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.15  2001/06/07 23:14:14  jongfoster
- *    Removing ACL and forward file loaders - these
- *    files have been merged into the config file.
- *    Cosmetic: Moving unloader funcs next to their
- *    respective loader funcs
- *
- *    Revision 1.14  2001/06/01 03:27:04  oes
- *    Fixed line continuation problem
- *
- *    Revision 1.13  2001/05/31 21:28:49  jongfoster
- *    Removed all permissionsfile code - it's now called the actions
- *    file, and (almost) all the code is in actions.c
- *
- *    Revision 1.12  2001/05/31 17:32:31  oes
- *
- *     - Enhanced domain part globbing with infix and prefix asterisk
- *       matching and optional unanchored operation
- *
- *    Revision 1.11  2001/05/29 23:25:24  oes
- *
- *     - load_config_line() and load_permissions_file() now use chomp()
- *
- *    Revision 1.10  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.9  2001/05/26 17:12:07  jongfoster
- *    Fatal errors loading configuration files now give better error messages.
- *
- *    Revision 1.8  2001/05/26 00:55:20  jongfoster
- *    Removing duplicated code.  load_forwardfile() now uses create_url_spec()
- *
- *    Revision 1.7  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.6  2001/05/23 12:27:33  oes
- *
- *    Fixed ugly indentation of my last changes
- *
- *    Revision 1.5  2001/05/23 10:39:05  oes
- *    - Added support for escaping the comment character
- *      in config files by a backslash
- *    - Added support for line continuation in config
- *      files
- *    - Fixed a buffer overflow bug with long config lines
- *
- *    Revision 1.4  2001/05/22 18:56:28  oes
- *    CRLF -> LF
- *
- *    Revision 1.3  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.2  2001/05/17 23:01:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:59  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <ctype.h>
-#include <assert.h>
-
-#if !defined(_WIN32) && !defined(__OS2__)
-#include <unistd.h>
-#endif
-
-#include "project.h"
-#include "list.h"
-#include "loaders.h"
-#include "filters.h"
-#include "parsers.h"
-#include "jcc.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "actions.h"
-#include "urlmatch.h"
-#include "encode.h"
-
-const char loaders_h_rcs[] = LOADERS_H_VERSION;
-
-/*
- * Currently active files.
- * These are also entered in the main linked list of files.
- */
-
-#ifdef FEATURE_TRUST
-static struct file_list *current_trustfile      = NULL;
-#endif /* def FEATURE_TRUST */
-
-static int load_one_re_filterfile(struct client_state *csp, int fileid);
-
-static struct file_list *current_re_filterfile[MAX_AF_FILES]  = {
-   NULL, NULL, NULL, NULL, NULL,
-   NULL, NULL, NULL, NULL, NULL
-};
-
-/*
- * Pseudo filter type for load_one_re_filterfile
- */
-#define NO_NEW_FILTER -1
-
-
-/*********************************************************************
- *
- * Function    :  sweep
- *
- * Description :  Basically a mark and sweep garbage collector, it is run
- *                (by the parent thread) every once in a while to reclaim memory.
- *
- * It uses a mark and sweep strategy:
- *   1) mark all files as inactive
- *
- *   2) check with each client:
- *       if it is active,   mark its files as active
- *       if it is inactive, free its resources
- *
- *   3) free the resources of all of the files that
- *      are still marked as inactive (and are obsolete).
- *
- *   N.B. files that are not obsolete don't have an unloader defined.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void sweep(void)
-{
-   struct file_list *fl, *nfl;
-   struct client_state *csp, *last_active;
-   int i;
-
-   /* clear all of the file's active flags */
-   for ( fl = files->next; NULL != fl; fl = fl->next )
-   {
-      fl->active = 0;
-   }
-
-   last_active = clients;
-   csp = clients->next;
-
-   while (NULL != csp)
-   {
-      if (csp->flags & CSP_FLAG_ACTIVE)
-      {
-         /* Mark this client's files as active */
-
-         /*
-          * Always have a configuration file.
-          * (Also note the slightly non-standard extra
-          * indirection here.)
-          */
-         csp->config->config_file_list->active = 1;
-
-         /* 
-          * Actions files
-          */
-         for (i = 0; i < MAX_AF_FILES; i++)
-         {
-            if (csp->actions_list[i])     
-            {
-               csp->actions_list[i]->active = 1;
-            }
-         }
-
-         /*
-          * Filter files
-          */
-         for (i = 0; i < MAX_AF_FILES; i++)
-         {
-            if (csp->rlist[i])     
-            {
-               csp->rlist[i]->active = 1;
-            }
-         }
-
-         /*
-          * Trust file
-          */
-#ifdef FEATURE_TRUST
-         if (csp->tlist)
-         {
-            csp->tlist->active = 1;
-         }
-#endif /* def FEATURE_TRUST */
-         
-         last_active = csp;
-         csp = csp->next;
-
-      }
-      else 
-      /*
-       * This client is not active. Free its resources.
-       */
-      {
-         last_active->next = csp->next;
-
-         freez(csp->ip_addr_str);
-         freez(csp->iob->buf);
-         freez(csp->error_message);
-
-         if (csp->action->flags & ACTION_FORWARD_OVERRIDE &&
-             NULL != csp->fwd)
-         {
-            unload_forward_spec(csp->fwd);
-         }
-         free_http_request(csp->http);
-
-         destroy_list(csp->headers);
-         destroy_list(csp->tags);
-
-         free_current_action(csp->action);
-
-#ifdef FEATURE_STATISTICS
-         urls_read++;
-         if (csp->flags & CSP_FLAG_REJECTED)
-         {
-            urls_rejected++;
-         }
-#endif /* def FEATURE_STATISTICS */
-
-         freez(csp);
-         
-         csp = last_active->next;
-      }
-   }
-
-   nfl = files;
-   fl = files->next;
-
-   while (fl != NULL)
-   {
-      if ( ( 0 == fl->active ) && ( NULL != fl->unloader ) )
-      {
-         nfl->next = fl->next;
-
-         (fl->unloader)(fl->f);
-
-         freez(fl->filename);
-         freez(fl);
-
-         fl = nfl->next;
-      }
-      else
-      {
-         nfl = fl;
-         fl = fl->next;
-      }
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  check_file_changed
- *
- * Description :  Helper function to check if a file needs reloading.
- *                If "current" is still current, return it.  Otherwise
- *                allocates a new (zeroed) "struct file_list", fills
- *                in the disk file name and timestamp, and returns it.
- *
- * Parameters  :
- *          1  :  current = The file_list currently being used - will
- *                          be checked to see if it is out of date.
- *                          May be NULL (which is treated as out of
- *                          date).
- *          2  :  filename = Name of file to check.
- *          3  :  newfl    = New file list. [Output only]
- *                           This will be set to NULL, OR a struct
- *                           file_list newly allocated on the
- *                           heap, with the filename and lastmodified
- *                           fields filled, and all others zeroed.
- *
- * Returns     :  If file unchanged: 0 (and sets newfl == NULL)
- *                If file changed: 1 and sets newfl != NULL
- *                On error: 1 and sets newfl == NULL
- *
- *********************************************************************/
-int check_file_changed(const struct file_list * current,
-                       const char * filename,
-                       struct file_list ** newfl)
-{
-   struct file_list *fs;
-   struct stat statbuf[1];
-
-   *newfl = NULL;
-
-   if (stat(filename, statbuf) < 0)
-   {
-      /* Error, probably file not found. */
-      return 1;
-   }
-
-   if (current
-       && (current->lastmodified == statbuf->st_mtime)
-       && (0 == strcmp(current->filename, filename)))
-   {
-      return 0;
-   }
-
-   fs = (struct file_list *)zalloc(sizeof(struct file_list));
-   if (fs == NULL)
-   {
-      /* Out of memory error */
-      return 1;
-   }
-
-
-   fs->filename = strdup(filename);
-   fs->lastmodified = statbuf->st_mtime;
-
-   if (fs->filename == NULL)
-   {
-      /* Out of memory error */
-      freez (fs);
-      return 1;
-   }
-   *newfl = fs;
-   return 1;
-}
-
-
-/*********************************************************************
- *
- * Function    :  simple_read_line
- *
- * Description :  Read a single line from a file and return it.
- *                This is basically a version of fgets() that malloc()s
- *                it's own line buffer.  Note that the buffer will
- *                always be a multiple of BUFFER_SIZE bytes long.
- *                Therefore if you are going to keep the string for
- *                an extended period of time, you should probably
- *                strdup() it and free() the original, to save memory.
- *
- *
- * Parameters  :
- *          1  :  dest = destination for newly malloc'd pointer to
- *                line data.  Will be set to NULL on error.
- *          2  :  fp = File to read from
- *          3  :  newline = Standard for newlines in the file.
- *                Will be unchanged if it's value on input is not
- *                NEWLINE_UNKNOWN.
- *                On output, may be changed from NEWLINE_UNKNOWN to
- *                actual convention in file.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_FILE   on EOF.
- *
- *********************************************************************/
-jb_err simple_read_line(FILE *fp, char **dest, int *newline)
-{
-   size_t len = 0;
-   size_t buflen = BUFFER_SIZE;
-   char * buf;
-   char * p;
-   int ch;
-   int realnewline = NEWLINE_UNKNOWN;
-
-   if (NULL == (buf = malloc(buflen)))
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   p = buf;
-
-/*
- * Character codes.  If you have a wierd compiler and the following are
- * incorrect, you also need to fix NEWLINE() in loaders.h
- */
-#define CHAR_CR '\r' /* ASCII 13 */
-#define CHAR_LF '\n' /* ASCII 10 */
-
-   for (;;)
-   {
-      ch = getc(fp);
-      if (ch == EOF)
-      {
-         if (len > 0)
-         {
-            *p = '\0';
-            *dest = buf;
-            return JB_ERR_OK;
-         }
-         else
-         {
-            free(buf);
-            *dest = NULL;
-            return JB_ERR_FILE;
-         }
-      }
-      else if (ch == CHAR_CR)
-      {
-         ch = getc(fp);
-         if (ch == CHAR_LF)
-         {
-            if (*newline == NEWLINE_UNKNOWN)
-            {
-               *newline = NEWLINE_DOS;
-            }
-         }
-         else
-         {
-            if (ch != EOF)
-            {
-               ungetc(ch, fp);
-            }
-            if (*newline == NEWLINE_UNKNOWN)
-            {
-               *newline = NEWLINE_MAC;
-            }
-         }
-         *p = '\0';
-         *dest = buf;
-         if (*newline == NEWLINE_UNKNOWN)
-         {
-            *newline = realnewline;
-         }
-         return JB_ERR_OK;
-      }
-      else if (ch == CHAR_LF)
-      {
-         *p = '\0';
-         *dest = buf;
-         if (*newline == NEWLINE_UNKNOWN)
-         {
-            *newline = NEWLINE_UNIX;
-         }
-         return JB_ERR_OK;
-      }
-      else if (ch == 0)
-      {
-         *p = '\0';
-         *dest = buf;
-         return JB_ERR_OK;
-      }
-
-      *p++ = (char)ch;
-
-      if (++len >= buflen)
-      {
-         buflen += BUFFER_SIZE;
-         if (NULL == (p = realloc(buf, buflen)))
-         {
-            free(buf);
-            return JB_ERR_MEMORY;
-         }
-         buf = p;
-         p = buf + len;
-      }
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  edit_read_line
- *
- * Description :  Read a single non-empty line from a file and return
- *                it.  Trims comments, leading and trailing whitespace
- *                and respects escaping of newline and comment char.
- *                Provides the line in 2 alternative forms: raw and
- *                preprocessed.
- *                - raw is the raw data read from the file.  If the
- *                  line is not modified, then this should be written
- *                  to the new file.
- *                - prefix is any comments and blank lines that were
- *                  read from the file.  If the line is modified, then
- *                  this should be written out to the file followed
- *                  by the modified data.  (If this string is non-empty
- *                  then it will have a newline at the end).
- *                - data is the actual data that will be parsed
- *                  further by appropriate routines.
- *                On EOF, the 3 strings will all be set to NULL and
- *                0 will be returned.
- *
- * Parameters  :
- *          1  :  fp = File to read from
- *          2  :  raw_out = destination for newly malloc'd pointer to
- *                raw line data.  May be NULL if you don't want it.
- *          3  :  prefix_out = destination for newly malloc'd pointer to
- *                comments.  May be NULL if you don't want it.
- *          4  :  data_out = destination for newly malloc'd pointer to
- *                line data with comments and leading/trailing spaces
- *                removed, and line continuation performed.  May be
- *                NULL if you don't want it.
- *          5  :  newline = Standard for newlines in the file.
- *                On input, set to value to use or NEWLINE_UNKNOWN.
- *                On output, may be changed from NEWLINE_UNKNOWN to
- *                actual convention in file.  May be NULL if you
- *                don't want it.
- *          6  :  line_number = Line number in file.  In "lines" as
- *                reported by a text editor, not lines containing data.
- *
- * Returns     :  JB_ERR_OK     on success
- *                JB_ERR_MEMORY on out-of-memory
- *                JB_ERR_FILE   on EOF.
- *
- *********************************************************************/
-jb_err edit_read_line(FILE *fp,
-                      char **raw_out,
-                      char **prefix_out,
-                      char **data_out,
-                      int *newline,
-                      unsigned long *line_number)
-{
-   char *p;          /* Temporary pointer   */
-   char *linebuf;    /* Line read from file */
-   char *linestart;  /* Start of linebuf, usually first non-whitespace char */
-   int contflag = 0; /* Nonzero for line continuation - i.e. line ends '\' */
-   int is_empty = 1; /* Flag if not got any data yet */
-   char *raw    = NULL; /* String to be stored in raw_out    */
-   char *prefix = NULL; /* String to be stored in prefix_out */
-   char *data   = NULL; /* String to be stored in data_out   */
-   int scrapnewline;    /* Used for (*newline) if newline==NULL */
-   jb_err rval = JB_ERR_OK;
-
-   assert(fp);
-   assert(raw_out || data_out);
-   assert(newline == NULL
-       || *newline == NEWLINE_UNKNOWN
-       || *newline == NEWLINE_UNIX
-       || *newline == NEWLINE_DOS
-       || *newline == NEWLINE_MAC);
-
-   if (newline == NULL)
-   {
-      scrapnewline = NEWLINE_UNKNOWN;
-      newline = &scrapnewline;
-   }
-
-   /* Set output parameters to NULL */
-   if (raw_out)
-   {
-      *raw_out    = NULL;
-   }
-   if (prefix_out)
-   {
-      *prefix_out = NULL;
-   }
-   if (data_out)
-   {
-      *data_out   = NULL;
-   }
-
-   /* Set string variables to new, empty strings. */
-
-   if (raw_out)
-   {
-      raw = strdup("");
-      if (NULL == raw)
-      {
-         return JB_ERR_MEMORY;
-      }
-   }
-   if (prefix_out)
-   {
-      prefix = strdup("");
-      if (NULL == prefix)
-      {
-         freez(raw);
-         return JB_ERR_MEMORY;
-      }
-   }
-   if (data_out)
-   {
-      data = strdup("");
-      if (NULL == data)
-      {
-         freez(raw);
-         freez(prefix);
-         return JB_ERR_MEMORY;
-      }
-   }
-
-   /* Main loop.  Loop while we need more data & it's not EOF. */
-
-   while ( (contflag || is_empty)
-        && (JB_ERR_OK == (rval = simple_read_line(fp, &linebuf, newline))))
-   {
-      if (line_number)
-      {
-         (*line_number)++;
-      }
-      if (raw)
-      {
-         string_append(&raw,linebuf);
-         if (string_append(&raw,NEWLINE(*newline)))
-         {
-            freez(prefix);
-            freez(data);
-            free(linebuf);
-            return JB_ERR_MEMORY;
-         }
-      }
-
-      /* Line continuation? Trim escape and set flag. */
-      p = linebuf + strlen(linebuf) - 1;
-      contflag = ((*linebuf != '\0') && (*p == '\\'));
-      if (contflag)
-      {
-         *p = '\0';
-      }
-
-      /* Trim leading spaces if we're at the start of the line */
-      linestart = linebuf;
-      assert(NULL != data);
-      if (*data == '\0')
-      {
-         /* Trim leading spaces */
-         while (*linestart && isspace((int)(unsigned char)*linestart))
-         {
-            linestart++;
-         }
-      }
-
-      /* Handle comment characters. */
-      p = linestart;
-      while ((p = strchr(p, '#')) != NULL)
-      {
-         /* Found a comment char.. */
-         if ((p != linebuf) && (*(p-1) == '\\'))
-         {
-            /* ..and it's escaped, left-shift the line over the escape. */
-            char *q = p - 1;
-            while ((*q = *(q + 1)) != '\0')
-            {
-               q++;
-            }
-            /* Now scan from just after the "#". */
-         }
-         else
-         {
-            /* Real comment.  Save it... */
-            if (p == linestart)
-            {
-               /* Special case:  Line only contains a comment, so all the
-                * previous whitespace is considered part of the comment.
-                * Undo the whitespace skipping, if any.
-                */
-               linestart = linebuf;
-               p = linestart;
-            }
-            if (prefix)
-            {
-               string_append(&prefix,p);
-               if (string_append(&prefix, NEWLINE(*newline)))
-               {
-                  freez(raw);
-                  freez(data);
-                  free(linebuf);
-                  return JB_ERR_MEMORY;
-               }
-            }
-
-            /* ... and chop off the rest of the line */
-            *p = '\0';
-         }
-      } /* END while (there's a # character) */
-
-      /* Write to the buffer */
-      if (*linestart)
-      {
-         is_empty = 0;
-         if (data)
-         {
-            if (string_append(&data, linestart))
-            {
-               freez(raw);
-               freez(prefix);
-               free(linebuf);
-               return JB_ERR_MEMORY;
-            }
-         }
-      }
-
-      free(linebuf);
-   } /* END while(we need more data) */
-
-   /* Handle simple_read_line() errors - ignore EOF */
-   if ((rval != JB_ERR_OK) && (rval != JB_ERR_FILE))
-   {
-      freez(raw);
-      freez(prefix);
-      freez(data);
-      return rval;
-   }
-
-   if (raw ? (*raw == '\0') : is_empty)
-   {
-      /* EOF and no data there.  (Definition of "data" depends on whether
-       * the caller cares about "raw" or just "data").
-       */
-
-      freez(raw);
-      freez(prefix);
-      freez(data);
-
-      return JB_ERR_FILE;
-   }
-   else
-   {
-      /* Got at least some data */
-
-      /* Remove trailing whitespace */
-      chomp(data);
-
-      if (raw_out)
-      {
-         *raw_out    = raw;
-      }
-      else
-      {
-         freez(raw);
-      }
-      if (prefix_out)
-      {
-         *prefix_out = prefix;
-      }
-      else
-      {
-         freez(prefix);
-      }
-      if (data_out)
-      {
-         *data_out   = data;
-      }
-      else
-      {
-         freez(data);
-      }
-      return JB_ERR_OK;
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  read_config_line
- *
- * Description :  Read a single non-empty line from a file and return
- *                it.  Trims comments, leading and trailing whitespace
- *                and respects escaping of newline and comment char.
- *
- * Parameters  :
- *          1  :  buf = Buffer to use.
- *          2  :  buflen = Size of buffer in bytes.
- *          3  :  fp = File to read from
- *          4  :  linenum = linenumber in file
- *
- * Returns     :  NULL on EOF or error
- *                Otherwise, returns buf.
- *
- *********************************************************************/
-char *read_config_line(char *buf, size_t buflen, FILE *fp, unsigned long *linenum)
-{
-   jb_err err;
-   char *buf2 = NULL;
-   err = edit_read_line(fp, NULL, NULL, &buf2, NULL, linenum);
-   if (err)
-   {
-      if (err == JB_ERR_MEMORY)
-      {
-         log_error(LOG_LEVEL_FATAL, "Out of memory loading a config file");
-      }
-      return NULL;
-   }
-   else
-   {
-      assert(buf2);
-      assert(strlen(buf2) + 1U < buflen);
-      strncpy(buf, buf2, buflen - 1);
-      free(buf2);
-      buf[buflen - 1] = '\0';
-      return buf;
-   }
-}
-
-
-#ifdef FEATURE_TRUST
-/*********************************************************************
- *
- * Function    :  unload_trustfile
- *
- * Description :  Unloads a trustfile.
- *
- * Parameters  :
- *          1  :  f = the data structure associated with the trustfile.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void unload_trustfile(void *f)
-{
-   struct block_spec *cur = (struct block_spec *)f;
-   struct block_spec *next;
-
-   while (cur != NULL)
-   {
-      next = cur->next;
-
-      free_url_spec(cur->url);
-      free(cur);
-
-      cur = next;
-   }
-
-}
-
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-/*********************************************************************
- *
- * Function    :  unload_current_trust_file
- *
- * Description :  Unloads current trust file - reset to state at
- *                beginning of program.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void unload_current_trust_file(void)
-{
-   if (current_trustfile)
-   {
-      current_trustfile->unloader = unload_trustfile;
-      current_trustfile = NULL;
-   }
-}
-#endif /* FEATURE_GRACEFUL_TERMINATION */
-
-
-/*********************************************************************
- *
- * Function    :  load_trustfile
- *
- * Description :  Read and parse a trustfile and add to files list.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int load_trustfile(struct client_state *csp)
-{
-   FILE *fp;
-
-   struct block_spec *b, *bl;
-   struct url_spec **tl;
-
-   char  buf[BUFFER_SIZE], *p, *q;
-   int reject, trusted;
-   struct file_list *fs;
-   unsigned long linenum = 0;
-   int trusted_referrers = 0;
-
-   if (!check_file_changed(current_trustfile, csp->config->trustfile, &fs))
-   {
-      /* No need to load */
-      if (csp)
-      {
-         csp->tlist = current_trustfile;
-      }
-      return(0);
-   }
-   if (!fs)
-   {
-      goto load_trustfile_error;
-   }
-
-   fs->f = bl = (struct block_spec *)zalloc(sizeof(*bl));
-   if (bl == NULL)
-   {
-      goto load_trustfile_error;
-   }
-
-   if ((fp = fopen(csp->config->trustfile, "r")) == NULL)
-   {
-      goto load_trustfile_error;
-   }
-
-   tl = csp->config->trust_list;
-
-   while (read_config_line(buf, sizeof(buf), fp, &linenum) != NULL)
-   {
-      trusted = 0;
-      reject  = 1;
-
-      if (*buf == '+')
-      {
-         trusted = 1;
-         *buf = '~';
-      }
-
-      if (*buf == '~')
-      {
-         reject = 0;
-         p = buf;
-         q = p+1;
-         while ((*p++ = *q++) != '\0')
-         {
-            /* nop */
-         }
-      }
-
-      /* skip blank lines */
-      if (*buf == '\0')
-      {
-         continue;
-      }
-
-      /* allocate a new node */
-      if ((b = zalloc(sizeof(*b))) == NULL)
-      {
-         fclose(fp);
-         goto load_trustfile_error;
-      }
-
-      /* add it to the list */
-      b->next  = bl->next;
-      bl->next = b;
-
-      b->reject = reject;
-
-      /* Save the URL pattern */
-      if (create_url_spec(b->url, buf))
-      {
-         fclose(fp);
-         goto load_trustfile_error;
-      }
-
-      /*
-       * save a pointer to URL's spec in the list of trusted URL's, too
-       */
-      if (trusted)
-      {
-         if(++trusted_referrers < MAX_TRUSTED_REFERRERS)
-         {
-            *tl++ = b->url;
-         }
-      }
-   }
-
-   if(trusted_referrers >= MAX_TRUSTED_REFERRERS) 
-   {
-      /*
-       * FIXME: ... after Privoxy 3.0.4 is out.
-       */
-       log_error(LOG_LEVEL_ERROR, "Too many trusted referrers. Current limit is %d, you are using %d.\n"
-          "  Additional trusted referrers are treated like ordinary trusted URLs.\n"
-          "  (You can increase this limit by changing MAX_TRUSTED_REFERRERS in project.h and recompiling).",
-          MAX_TRUSTED_REFERRERS, trusted_referrers);
-   }
-
-   *tl = NULL;
-
-   fclose(fp);
-
-   /* the old one is now obsolete */
-   if (current_trustfile)
-   {
-      current_trustfile->unloader = unload_trustfile;
-   }
-
-   fs->next    = files->next;
-   files->next = fs;
-   current_trustfile = fs;
-
-   if (csp)
-   {
-      csp->tlist = fs;
-   }
-
-   return(0);
-
-load_trustfile_error:
-   log_error(LOG_LEVEL_FATAL, "can't load trustfile '%s': %E",
-             csp->config->trustfile);
-   return(-1);
-
-}
-#endif /* def FEATURE_TRUST */
-
-
-/*********************************************************************
- *
- * Function    :  unload_re_filterfile
- *
- * Description :  Unload the re_filter list by freeing all chained
- *                re_filterfile specs and their data.
- *
- * Parameters  :
- *          1  :  f = the data structure associated with the filterfile.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void unload_re_filterfile(void *f)
-{
-   struct re_filterfile_spec *a, *b = (struct re_filterfile_spec *)f;
-
-   while (b != NULL)
-   {
-      a = b->next;
-
-      destroy_list(b->patterns);
-      pcrs_free_joblist(b->joblist);
-      freez(b->name);
-      freez(b->description);
-      freez(b);
-
-      b = a;
-   }
-
-   return;
-}
-
-/*********************************************************************
- *
- * Function    :  unload_forward_spec
- *
- * Description :  Unload the forward spec settings by freeing all 
- *                memory referenced by members and the memory for
- *                the spec itself.
- *
- * Parameters  :
- *          1  :  fwd = the forward spec.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void unload_forward_spec(struct forward_spec *fwd)
-{
-   free_url_spec(fwd->url);
-   freez(fwd->gateway_host);
-   freez(fwd->forward_host);
-   free(fwd);
-
-   return;
-}
-
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-/*********************************************************************
- *
- * Function    :  unload_current_re_filterfile
- *
- * Description :  Unloads current re_filter file - reset to state at
- *                beginning of program.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void unload_current_re_filterfile(void)
-{
-   int i;
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (current_re_filterfile[i])
-      {
-         current_re_filterfile[i]->unloader = unload_re_filterfile;
-         current_re_filterfile[i] = NULL;
-      }
-   }
-}
-#endif
-
-
-/*********************************************************************
- *
- * Function    :  load_re_filterfiles
- *
- * Description :  Loads all the filterfiles. 
- *                Generate a chained list of re_filterfile_spec's from
- *                the "FILTER: " blocks, compiling all their substitutions
- *                into chained lists of pcrs_job structs.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int load_re_filterfiles(struct client_state *csp)
-{
-   int i;
-   int result;
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      if (csp->config->re_filterfile[i])
-      {
-         result = load_one_re_filterfile(csp, i);
-         if (result)
-         {
-            return result;
-         }
-      }
-      else if (current_re_filterfile[i])
-      {
-         current_re_filterfile[i]->unloader = unload_re_filterfile;
-         current_re_filterfile[i] = NULL;
-      }
-   }
-
-   return 0;
-}
-
-
-/*********************************************************************
- *
- * Function    :  load_one_re_filterfile
- *
- * Description :  Load a re_filterfile. 
- *                Generate a chained list of re_filterfile_spec's from
- *                the "FILTER: " blocks, compiling all their substitutions
- *                into chained lists of pcrs_job structs.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int load_one_re_filterfile(struct client_state *csp, int fileid)
-{
-   FILE *fp;
-
-   struct re_filterfile_spec *new_bl, *bl = NULL;
-   struct file_list *fs;
-
-   char  buf[BUFFER_SIZE];
-   int error;
-   unsigned long linenum = 0;
-   pcrs_job *dummy, *lastjob = NULL;
-
-   /*
-    * No need to reload if unchanged
-    */
-   if (!check_file_changed(current_re_filterfile[fileid], csp->config->re_filterfile[fileid], &fs))
-   {
-      if (csp)
-      {
-         csp->rlist[fileid] = current_re_filterfile[fileid];
-      }
-      return(0);
-   }
-   if (!fs)
-   {
-      goto load_re_filterfile_error;
-   }
-
-   /* 
-    * Open the file or fail
-    */
-   if ((fp = fopen(csp->config->re_filterfile[fileid], "r")) == NULL)
-   {
-      goto load_re_filterfile_error;
-   }
-
-   /* 
-    * Read line by line
-    */
-   while (read_config_line(buf, sizeof(buf), fp, &linenum) != NULL)
-   {
-      int new_filter = NO_NEW_FILTER;
-
-      if (strncmp(buf, "FILTER:", 7) == 0)
-      {
-         new_filter = FT_CONTENT_FILTER;
-      }
-      else if (strncmp(buf, "SERVER-HEADER-FILTER:", 21) == 0)
-      {
-         new_filter = FT_SERVER_HEADER_FILTER;
-      }
-      else if (strncmp(buf, "CLIENT-HEADER-FILTER:", 21) == 0)
-      {
-         new_filter = FT_CLIENT_HEADER_FILTER;
-      }
-      else if (strncmp(buf, "CLIENT-HEADER-TAGGER:", 21) == 0)
-      {
-         new_filter = FT_CLIENT_HEADER_TAGGER;
-      }
-      else if (strncmp(buf, "SERVER-HEADER-TAGGER:", 21) == 0)
-      {
-         new_filter = FT_SERVER_HEADER_TAGGER;
-      }
-
-      /*
-       * If this is the head of a new filter block, make it a
-       * re_filterfile spec of its own and chain it to the list:
-       */
-      if (new_filter != NO_NEW_FILTER)
-      {
-         new_bl = (struct re_filterfile_spec  *)zalloc(sizeof(*bl));
-         if (new_bl == NULL)
-         {
-            goto load_re_filterfile_error;
-         }
-         if (new_filter == FT_CONTENT_FILTER)
-         {
-            new_bl->name = chomp(buf + 7);
-         }
-         else
-         {
-            new_bl->name = chomp(buf + 21);
-         }
-         new_bl->type = new_filter;
-
-         /*
-          * If a filter description is available,
-          * encode it to HTML and save it.
-          */
-         if (NULL != (new_bl->description = strpbrk(new_bl->name, " \t")))
-         {
-            *new_bl->description++ = '\0';
-            new_bl->description = html_encode(chomp(new_bl->description));
-            if (NULL == new_bl->description)
-            {
-               new_bl->description = strdup("Out of memory while encoding this filter's description to HTML");
-            }
-         }
-         else
-         {
-            new_bl->description = strdup("No description available for this filter");
-         }
-
-         new_bl->name = strdup(chomp(new_bl->name));
-         
-         /*
-          * If this is the first filter block, chain it
-          * to the file_list rather than its (nonexistant)
-          * predecessor
-          */
-         if (fs->f == NULL)
-         {
-            fs->f = new_bl;
-         }
-         else
-         {
-            assert(NULL != bl);
-            bl->next = new_bl;
-         }
-         bl = new_bl;
-
-         log_error(LOG_LEVEL_RE_FILTER, "Reading in filter \"%s\" (\"%s\")", bl->name, bl->description);
-
-         continue;
-      }
-
-      /* 
-       * Else, save the expression, make it a pcrs_job
-       * and chain it into the current filter's joblist 
-       */
-      if (bl != NULL)
-      {
-         error = enlist(bl->patterns, buf);
-         if (JB_ERR_MEMORY == error)
-         {
-            log_error(LOG_LEVEL_FATAL,
-               "Out of memory while enlisting re_filter job \'%s\' for filter %s.", buf, bl->name);
-         }
-         assert(JB_ERR_OK == error);
-
-         if (pcrs_job_is_dynamic(buf))
-         {
-            /*
-             * Dynamic pattern that might contain variables
-             * and has to be recompiled for every request
-             */
-            if (bl->joblist != NULL)
-            {
-                pcrs_free_joblist(bl->joblist);
-                bl->joblist = NULL;
-            }
-            bl->dynamic = 1;
-            log_error(LOG_LEVEL_RE_FILTER,
-               "Adding dynamic re_filter job \'%s\' to filter %s succeeded.", buf, bl->name);
-            continue;             
-         }
-         else if (bl->dynamic)
-         {
-            /*
-             * A previous job was dynamic and as we
-             * recompile the whole filter anyway, it
-             * makes no sense to compile this job now.
-             */
-            log_error(LOG_LEVEL_RE_FILTER,
-               "Adding static re_filter job \'%s\' to dynamic filter %s succeeded.", buf, bl->name);
-            continue;
-         }
-
-         if ((dummy = pcrs_compile_command(buf, &error)) == NULL)
-         {
-            log_error(LOG_LEVEL_ERROR,
-               "Adding re_filter job \'%s\' to filter %s failed with error %d.", buf, bl->name, error);
-            continue;
-         }
-         else
-         {
-            if (bl->joblist == NULL)
-            {
-               bl->joblist = dummy;
-            }
-            else if (NULL != lastjob)
-            {
-               lastjob->next = dummy;
-            }
-            lastjob = dummy;
-            log_error(LOG_LEVEL_RE_FILTER, "Adding re_filter job \'%s\' to filter %s succeeded.", buf, bl->name);
-         }
-      }
-      else
-      {
-         log_error(LOG_LEVEL_ERROR, "Ignoring job %s outside filter block in %s, line %d",
-            buf, csp->config->re_filterfile[fileid], linenum);
-      }
-   }
-
-   fclose(fp);
-
-   /* 
-    * Schedule the now-obsolete old data for unloading
-    */
-   if ( NULL != current_re_filterfile[fileid] )
-   {
-      current_re_filterfile[fileid]->unloader = unload_re_filterfile;
-   }
-
-   /*
-    * Chain this file into the global list of loaded files
-    */
-   fs->next    = files->next;
-   files->next = fs;
-   current_re_filterfile[fileid] = fs;
-
-   if (csp)
-   {
-      csp->rlist[fileid] = fs;
-   }
-
-   return( 0 );
-
-load_re_filterfile_error:
-   log_error(LOG_LEVEL_FATAL, "can't load re_filterfile '%s': %E",
-             csp->config->re_filterfile[fileid]);
-   return(-1);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  add_loader
- *
- * Description :  Called from `load_config'.  Called once for each input
- *                file found in config.
- *
- * Parameters  :
- *          1  :  loader = pointer to a function that can parse and load
- *                the appropriate config file.
- *          2  :  config = The configuration_spec to add the loader to.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void add_loader(int (*loader)(struct client_state *),
-                struct configuration_spec * config)
-{
-   int i;
-
-   for (i=0; i < NLOADERS; i++)
-   {
-      if (config->loaders[i] == NULL)
-      {
-         config->loaders[i] = loader;
-         break;
-      }
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  run_loader
- *
- * Description :  Called from `load_config' and `listen_loop'.  This
- *                function keeps the "csp" current with any file mods
- *                since the last loop.  If a file is unchanged, the
- *                loader functions do NOT reload the file.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *                      Must be non-null.  Reads: "csp->config"
- *                      Writes: various data members.
- *
- * Returns     :  0 => Ok, everything else is an error.
- *
- *********************************************************************/
-int run_loader(struct client_state *csp)
-{
-   int ret = 0;
-   int i;
-
-   for (i=0; i < NLOADERS; i++)
-   {
-      if (csp->config->loaders[i] == NULL)
-      {
-         break;
-      }
-      ret |= (csp->config->loaders[i])(csp);
-   }
-   return(ret);
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/loaders.h b/external/privoxy/loaders.h
deleted file mode 100644
index ded18e3..0000000
--- a/external/privoxy/loaders.h
+++ /dev/null
@@ -1,250 +0,0 @@
-#ifndef LOADERS_H_INCLUDED
-#define LOADERS_H_INCLUDED
-#define LOADERS_H_VERSION "$Id: loaders.h,v 1.23 2008/03/30 14:52:10 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/loaders.h,v $
- *
- * Purpose     :  Functions to load and unload the various
- *                configuration files.  Also contains code to manage
- *                the list of active loaders, and to automatically 
- *                unload files that are no longer in use.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: loaders.h,v $
- *    Revision 1.23  2008/03/30 14:52:10  fabiankeil
- *    Rename load_actions_file() and load_re_filterfile()
- *    as they load multiple files "now".
- *
- *    Revision 1.22  2007/06/01 14:12:38  fabiankeil
- *    Add unload_forward_spec() in preparation for forward-override{}.
- *
- *    Revision 1.21  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.19  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.18  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.17  2002/03/16 23:54:06  jongfoster
- *    Adding graceful termination feature, to help look for memory leaks.
- *    If you enable this (which, by design, has to be done by hand
- *    editing config.h) and then go to http://i.j.b/die, then the program
- *    will exit cleanly after the *next* request.  It should free all the
- *    memory that was used.
- *
- *    Revision 1.16  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.15  2002/01/22 23:46:18  jongfoster
- *    Moving edit_read_line() and simple_read_line() to loaders.c, and
- *    extending them to support reading MS-DOS, Mac and UNIX style files
- *    on all platforms.
- *
- *    Modifying read_config_line() (without changing it's prototype) to
- *    be a trivial wrapper for edit_read_line().  This means that we have
- *    one function to read a line and handle comments, which is common
- *    between the initialization code and the edit interface.
- *
- *    Revision 1.14  2002/01/17 21:03:08  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Revision 1.13  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.12  2001/11/07 00:02:13  steudten
- *    Add line number in error output for lineparsing for
- *    actionsfile and configfile.
- *    Special handling for CLF added.
- *
- *    Revision 1.11  2001/10/23 21:38:53  jongfoster
- *    Adding error-checking to create_url_spec()
- *
- *    Revision 1.10  2001/09/22 16:36:59  jongfoster
- *    Removing unused parameter fs from read_config_line()
- *
- *    Revision 1.9  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.8  2001/07/29 18:58:15  jongfoster
- *    Removing nested #includes, adding forward declarations for needed
- *    structures, and changing the #define _FILENAME_H to FILENAME_H_INCLUDED.
- *
- *    Revision 1.7  2001/07/13 14:01:54  oes
- *    Removed all #ifdef PCRS
- *
- *    Revision 1.6  2001/06/07 23:14:38  jongfoster
- *    Removing ACL and forward file loaders - these files have
- *    been merged into the config file.
- *
- *    Revision 1.5  2001/05/31 21:28:49  jongfoster
- *    Removed all permissionsfile code - it's now called the actions
- *    file, and (almost) all the code is in actions.c
- *
- *    Revision 1.4  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.3  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:00  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Structures taken from project.h */
-struct client_state;
-struct file_list;
-struct configuration_spec;
-struct url_spec;
-
-extern void sweep(void);
-extern char *read_config_line(char *buf, size_t buflen, FILE *fp, unsigned long *linenum);
-extern int check_file_changed(const struct file_list * current,
-                              const char * filename,
-                              struct file_list ** newfl);
-
-extern jb_err edit_read_line(FILE *fp,
-                             char **raw_out,
-                             char **prefix_out,
-                             char **data_out,
-                             int *newline,
-                             unsigned long *line_number);
-
-extern jb_err simple_read_line(FILE *fp, char **dest, int *newline);
-
-/*
- * Various types of newlines that a file may contain.
- */
-#define NEWLINE_UNKNOWN 0  /* Newline convention in file is unknown */
-#define NEWLINE_UNIX    1  /* Newline convention in file is '\n'   (ASCII 10) */
-#define NEWLINE_DOS     2  /* Newline convention in file is '\r\n' (ASCII 13,10) */
-#define NEWLINE_MAC     3  /* Newline convention in file is '\r'   (ASCII 13) */
-
-/*
- * Types of newlines that a file may contain, as strings.  If you have an
- * extremely wierd compiler that does not have '\r' == CR == ASCII 13 and
- * '\n' == LF == ASCII 10), then fix CHAR_CR and CHAR_LF in loaders.c as
- * well as these definitions.
- */
-#define NEWLINE(style) ((style)==NEWLINE_DOS ? "\r\n" : \
-                        ((style)==NEWLINE_MAC ? "\r" : "\n"))
-
-
-extern short int MustReload;
-extern int load_action_files(struct client_state *csp);
-extern int load_re_filterfiles(struct client_state *csp);
-
-#ifdef FEATURE_TRUST
-extern int load_trustfile(struct client_state *csp);
-#endif /* def FEATURE_TRUST */
-
-#ifdef FEATURE_GRACEFUL_TERMINATION
-#ifdef FEATURE_TRUST
-void unload_current_trust_file(void);
-#endif
-void unload_current_re_filterfile(void);
-#endif /* FEATURE_GRACEFUL_TERMINATION */
-
-void unload_forward_spec(struct forward_spec *fwd);
-
-extern void add_loader(int (*loader)(struct client_state *), 
-                       struct configuration_spec * config);
-extern int run_loader(struct client_state *csp);
-
-/* Revision control strings from this header and associated .c file */
-extern const char loaders_rcs[];
-extern const char loaders_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef LOADERS_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/match-all.action b/external/privoxy/match-all.action
deleted file mode 100644
index 904d85b..0000000
--- a/external/privoxy/match-all.action
+++ /dev/null
@@ -1,14 +0,0 @@
-#############################################################################
-# $Id: match-all.action,v 1.2 2009/02/14 10:41:07 fabiankeil Exp $
-#
-# This file contains the actions that are applied to all requests and
-# may be overruled later on by other actions files. Less experienced
-# users should only edit this file through the actions file editor.
-#
-#############################################################################
-{ \
-+change-x-forwarded-for{block} \
-+hide-from-header{block} \
-+set-image-blocker{pattern} \
-}
-/ # Match all URLs
diff --git a/external/privoxy/miscutil.c b/external/privoxy/miscutil.c
deleted file mode 100644
index 74aa32e..0000000
--- a/external/privoxy/miscutil.c
+++ /dev/null
@@ -1,1907 +0,0 @@
-const char miscutil_rcs[] = "$Id: miscutil.c,v 1.62 2008/12/04 18:16:41 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/miscutil.c,v $
- *
- * Purpose     :  zalloc, hash_string, safe_strerror, strcmpic,
- *                strncmpic, chomp, and MinGW32 strdup
- *                functions. 
- *                These are each too small to deserve their own file
- *                but don't really fit in any other file.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007
- *                the SourceForge Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                The timegm replacement function was taken from GnuPG,
- *                Copyright (C) 2004 Free Software Foundation, Inc.
- *
- *                The snprintf replacement function is written by
- *                Mark Martinec who also holds the copyright. It can be
- *                used under the terms of the GPL or the terms of the
- *                "Frontier Artistic License".
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: miscutil.c,v $
- *    Revision 1.62  2008/12/04 18:16:41  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.61  2008/10/18 11:09:23  fabiankeil
- *    Improve seed used by pick_from_range() on mingw32.
- *
- *    Revision 1.60  2008/09/07 12:35:05  fabiankeil
- *    Add mutex lock support for _WIN32.
- *
- *    Revision 1.59  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.58  2008/04/17 14:53:30  fabiankeil
- *    Move simplematch() into urlmatch.c as it's only
- *    used to match (old-school) domain patterns.
- *
- *    Revision 1.57  2008/03/24 15:29:51  fabiankeil
- *    Pet gcc43.
- *
- *    Revision 1.56  2007/12/01 12:59:05  fabiankeil
- *    Some sanity checks for pick_from_range().
- *
- *    Revision 1.55  2007/11/03 17:34:49  fabiankeil
- *    Log the "weak randomization factor" warning only
- *    once for mingw32 and provide some more details.
- *
- *    Revision 1.54  2007/09/19 20:28:37  fabiankeil
- *    If privoxy_strlcpy() is called with a "buffer" size
- *    of 0, don't touch whatever destination points to.
- *
- *    Revision 1.53  2007/09/09 18:20:20  fabiankeil
- *    Turn privoxy_strlcpy() into a function and try to work with
- *    b0rked snprintf() implementations too. Reported by icmp30.
- *
- *    Revision 1.52  2007/08/19 12:32:34  fabiankeil
- *    Fix a conversion warning.
- *
- *    Revision 1.51  2007/06/17 16:12:22  fabiankeil
- *    #ifdef _WIN32 the last commit. According to David Shaw,
- *    one of the gnupg developers, the changes are mingw32-specific.
- *
- *    Revision 1.50  2007/06/10 14:59:59  fabiankeil
- *    Change replacement timegm() to better match our style, plug a small
- *    but guaranteed memory leak and fix "time zone breathing" on mingw32.
- *
- *    Revision 1.49  2007/05/11 11:48:15  fabiankeil
- *    - Delete strsav() which was replaced
- *      by string_append() years ago.
- *    - Add a strlcat() look-alike.
- *    - Use strlcat() and strlcpy() in those parts
- *      of the code that are run on unixes.
- *
- *    Revision 1.48  2007/04/09 17:48:51  fabiankeil
- *    Check for HAVE_SNPRINTF instead of __OS2__
- *    before including the portable snprintf() code.
- *
- *    Revision 1.47  2007/03/17 11:52:15  fabiankeil
- *    - Use snprintf instead of sprintf.
- *    - Mention copyright for the replacement
- *      functions in the copyright header.
- *
- *    Revision 1.46  2007/01/18 15:03:20  fabiankeil
- *    Don't include replacement timegm() if
- *    putenv() or tzset() isn't available.
- *
- *    Revision 1.45  2006/12/26 17:31:41  fabiankeil
- *    Mutex protect rand() if POSIX threading
- *    is used, warn the user if that's not possible
- *    and stop using it on _WIN32 where it could
- *    cause crashes.
- *
- *    Revision 1.44  2006/11/07 12:46:43  fabiankeil
- *    Silence compiler warning on NetBSD 3.1.
- *
- *    Revision 1.43  2006/09/23 13:26:38  roro
- *    Replace TABs by spaces in source code.
- *
- *    Revision 1.42  2006/09/09 14:01:45  fabiankeil
- *    Integrated Oliver Yeoh's domain pattern fix
- *    to make sure *x matches xx. Closes Patch 1217393
- *    and Bug 1170767.
- *
- *    Revision 1.41  2006/08/18 16:03:17  david__schmidt
- *    Tweak for OS/2 build happiness.
- *
- *    Revision 1.40  2006/08/17 17:15:10  fabiankeil
- *    - Back to timegm() using GnuPG's replacement if necessary.
- *      Using mktime() and localtime() could add a on hour offset if
- *      the randomize factor was big enough to lead to a summer/wintertime
- *      switch.
- *
- *    - Removed now-useless Privoxy 3.0.3 compatibility glue.
- *
- *    - Moved randomization code into pick_from_range().
- *
- *    - Changed parse_header_time definition.
- *      time_t isn't guaranteed to be signed and
- *      if it isn't, -1 isn't available as error code.
- *      Changed some variable types in client_if_modified_since()
- *      because of the same reason.
- *
- *    Revision 1.39  2006/07/18 14:48:46  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.37.2.4  2003/12/01 14:45:14  oes
- *    Fixed two more problems with wildcarding in simplematch()
- *
- *    Revision 1.37.2.3  2003/11/20 11:39:24  oes
- *    Bugfix: The "?" wildcard for domain names had never been implemented. Ooops\!
- *
- *    Revision 1.37.2.2  2002/11/12 14:28:18  oes
- *    Proper backtracking in simplematch; fixes bug #632888
- *
- *    Revision 1.37.2.1  2002/09/25 12:58:51  oes
- *    Made strcmpic and strncmpic safe against NULL arguments
- *    (which are now treated as empty strings).
- *
- *    Revision 1.37  2002/04/26 18:29:43  jongfoster
- *    Fixing this Visual C++ warning:
- *    miscutil.c(710) : warning C4090: '=' : different 'const' qualifiers
- *
- *    Revision 1.36  2002/04/26 12:55:38  oes
- *    New function string_toupper
- *
- *    Revision 1.35  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.34  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.33  2002/03/07 03:46:53  oes
- *    Fixed compiler warnings etc
- *
- *    Revision 1.32  2002/03/06 23:02:57  jongfoster
- *    Removing tabs
- *
- *    Revision 1.31  2002/03/05 04:52:42  oes
- *    Deleted non-errlog debugging code
- *
- *    Revision 1.30  2002/03/04 18:27:42  oes
- *    - Deleted deletePidFile
- *    - Made write_pid_file use the --pidfile option value
- *      (or no PID file, if the option was absent)
- *    - Played styleguide police
- *
- *    Revision 1.29  2002/03/04 02:08:02  david__schmidt
- *    Enable web editing of actions file on OS/2 (it had been broken all this time!)
- *
- *    Revision 1.28  2002/03/03 09:18:03  joergs
- *    Made jumbjuster work on AmigaOS again.
- *
- *    Revision 1.27  2002/01/21 00:52:32  jongfoster
- *    Adding string_join()
- *
- *    Revision 1.26  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.25  2001/11/13 00:16:38  jongfoster
- *    Replacing references to malloc.h with the standard stdlib.h
- *    (See ANSI or K&R 2nd Ed)
- *
- *    Revision 1.24  2001/11/05 21:41:43  steudten
- *    Add changes to be a real daemon just for unix os.
- *    (change cwd to /, detach from controlling tty, set
- *    process group and session leader to the own process.
- *    Add DBG() Macro.
- *    Add some fatal-error log message for failed malloc().
- *    Add '-d' if compiled with 'configure --with-debug' to
- *    enable debug output.
- *
- *    Revision 1.23  2001/10/29 03:48:10  david__schmidt
- *    OS/2 native needed a snprintf() routine.  Added one to miscutil, brackedted
- *    by and __OS2__ ifdef.
- *
- *    Revision 1.22  2001/10/26 17:39:38  oes
- *    Moved ijb_isspace and ijb_tolower to project.h
- *
- *    Revision 1.21  2001/10/23 21:27:50  jongfoster
- *    Standardising error codes in string_append
- *    make_path() no longer adds '\\' if the dir already ends in '\\' (this
- *    is just copying a UNIX-specific fix to the Windows-specific part)
- *
- *    Revision 1.20  2001/10/22 15:33:56  david__schmidt
- *    Special-cased OS/2 out of the Netscape-abort-on-404-in-js problem in
- *    filters.c.  Added a FIXME in front of the offending code.  I'll gladly
- *    put in a better/more robust fix for all parties if one is presented...
- *    It seems that just returning 200 instead of 404 would pretty much fix
- *    it for everyone, but I don't know all the history of the problem.
- *
- *    Revision 1.19  2001/10/14 22:02:57  jongfoster
- *    New function string_append() which is like strsav(), but running
- *    out of memory isn't automatically FATAL.
- *
- *    Revision 1.18  2001/09/20 13:33:43  steudten
- *
- *    change long to int as return value in hash_string(). Remember the wraparound
- *    for int = long = sizeof(4) - thats maybe not what we want.
- *
- *    Revision 1.17  2001/09/13 20:51:29  jongfoster
- *    Fixing potential problems with characters >=128 in simplematch()
- *    This was also a compiler warning.
- *
- *    Revision 1.16  2001/09/10 10:56:59  oes
- *    Silenced compiler warnings
- *
- *    Revision 1.15  2001/07/13 14:02:24  oes
- *    Removed vim-settings
- *
- *    Revision 1.14  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.13  2001/06/29 13:32:14  oes
- *    Removed logentry from cancelled commit
- *
- *    Revision 1.12  2001/06/09 10:55:28  jongfoster
- *    Changing BUFSIZ ==> BUFFER_SIZE
- *
- *    Revision 1.11  2001/06/07 23:09:19  jongfoster
- *    Cosmetic indentation changes.
- *
- *    Revision 1.10  2001/06/07 14:51:38  joergs
- *    make_path() no longer adds '/' if the dir already ends in '/'.
- *
- *    Revision 1.9  2001/06/07 14:43:17  swa
- *    slight mistake in make_path, unix path style is /.
- *
- *    Revision 1.8  2001/06/05 22:32:01  jongfoster
- *    New function make_path() to splice directory and file names together.
- *
- *    Revision 1.7  2001/06/03 19:12:30  oes
- *    introduced bindup()
- *
- *    Revision 1.6  2001/06/01 18:14:49  jongfoster
- *    Changing the calls to strerr() to check HAVE_STRERR (which is defined
- *    in config.h if appropriate) rather than the NO_STRERR macro.
- *
- *    Revision 1.5  2001/06/01 10:31:51  oes
- *    Added character class matching to trivimatch; renamed to simplematch
- *
- *    Revision 1.4  2001/05/31 17:32:31  oes
- *
- *     - Enhanced domain part globbing with infix and prefix asterisk
- *       matching and optional unanchored operation
- *
- *    Revision 1.3  2001/05/29 23:10:09  oes
- *
- *
- *     - Introduced chomp()
- *     - Moved strsav() from showargs to miscutil
- *
- *    Revision 1.2  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:00  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#if !defined(_WIN32) && !defined(__OS2__)
-#include <unistd.h>
-#endif /* #if !defined(_WIN32) && !defined(__OS2__) */
-#include <string.h>
-#include <ctype.h>
-#include <assert.h>
-
-#if !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV)
-#include <time.h>
-#endif /* !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) */
-
-#include "project.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "jcc.h"
-
-const char miscutil_h_rcs[] = MISCUTIL_H_VERSION;
-
-/*********************************************************************
- *
- * Function    :  zalloc
- *
- * Description :  Malloc some memory and set it to '\0'.
- *                The way calloc() ought to be -acjc
- *
- * Parameters  :
- *          1  :  size = Size of memory chunk to return.
- *
- * Returns     :  Pointer to newly malloc'd memory chunk.
- *
- *********************************************************************/
-void *zalloc(size_t size)
-{
-   void * ret;
-
-   if ((ret = (void *)malloc(size)) != NULL)
-   {
-      memset(ret, 0, size);
-   }
-
-   return(ret);
-
-}
-
-
-#if defined(unix)
-/*********************************************************************
- *
- * Function    :  write_pid_file 
- *
- * Description :  Writes a pid file with the pid of the main process 
- *
- * Parameters  :  None
- *
- * Returns     :  N/A 
- *
- *********************************************************************/
-void write_pid_file(void)
-{
-   FILE   *fp;
-   
-   /*
-    * If no --pidfile option was given,
-    * we can live without one.
-    */
-   if (pidfile == NULL) return;
-
-   if ((fp = fopen(pidfile, "w")) == NULL)
-   {
-      log_error(LOG_LEVEL_INFO, "can't open pidfile '%s': %E", pidfile);
-   }
-   else
-   {
-      fprintf(fp, "%u\n", (unsigned int) getpid());
-      fclose (fp);
-   }
-   return;
-
-}
-#endif /* def unix */
-
-
-/*********************************************************************
- *
- * Function    :  hash_string
- *
- * Description :  Take a string and compute a (hopefuly) unique numeric
- *                integer value.  This has several uses, but being able
- *                to "switch" a string the one of my favorites.
- *
- * Parameters  :
- *          1  :  s : string to be hashed.
- *
- * Returns     :  an unsigned long variable with the hashed value.
- *
- *********************************************************************/
-unsigned int hash_string( const char* s )
-{
-   unsigned int h = 0; 
-
-   for ( ; *s; ++s )
-   {
-      h = 5 * h + (unsigned int)*s;
-   }
-
-   return (h);
-
-}
-
-
-#ifdef __MINGW32__
-/*********************************************************************
- *
- * Function    :  strdup
- *
- * Description :  For some reason (which is beyond me), gcc and WIN32
- *                don't like strdup.  When a "free" is executed on a
- *                strdup'd ptr, it can at times freez up!  So I just
- *                replaced it and problem was solved.
- *
- * Parameters  :
- *          1  :  s = string to duplicate
- *
- * Returns     :  Pointer to newly malloc'ed copy of the string.
- *
- *********************************************************************/
-char *strdup( const char *s )
-{
-   char * result = (char *)malloc( strlen(s)+1 );
-
-   if (result != NULL)
-   {
-      strcpy( result, s );
-   }
-
-   return( result );
-}
-
-#endif /* def __MINGW32__ */
-
-
-
-/*********************************************************************
- *
- * Function    :  safe_strerror
- *
- * Description :  Variant of the library routine strerror() which will
- *                work on systems without the library routine, and
- *                which should never return NULL.
- *
- * Parameters  :
- *          1  :  err = the `errno' of the last operation.
- *
- * Returns     :  An "English" string of the last `errno'.  Allocated
- *                with strdup(), so caller frees.  May be NULL if the
- *                system is out of memory.
- *
- *********************************************************************/
-char *safe_strerror(int err)
-{
-   char *s = NULL;
-   char buf[BUFFER_SIZE];
-
-
-#ifdef HAVE_STRERROR
-   s = strerror(err);
-#endif /* HAVE_STRERROR */
-
-   if (s == NULL)
-   {
-      snprintf(buf, sizeof(buf), "(errno = %d)", err);
-      s = buf;
-   }
-
-   return(strdup(s));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  strcmpic
- *
- * Description :  Case insensitive string comparison
- *
- * Parameters  :
- *          1  :  s1 = string 1 to compare
- *          2  :  s2 = string 2 to compare
- *
- * Returns     :  0 if s1==s2, Negative if s1<s2, Positive if s1>s2
- *
- *********************************************************************/
-int strcmpic(const char *s1, const char *s2)
-{
-   if (!s1) s1 = "";
-   if (!s2) s2 = "";
-
-   while (*s1 && *s2)
-   {
-      if ( ( *s1 != *s2 ) && ( ijb_tolower(*s1) != ijb_tolower(*s2) ) )
-      {
-         break;
-      }
-      s1++, s2++;
-   }
-   return(ijb_tolower(*s1) - ijb_tolower(*s2));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  strncmpic
- *
- * Description :  Case insensitive string comparison (upto n characters)
- *
- * Parameters  :
- *          1  :  s1 = string 1 to compare
- *          2  :  s2 = string 2 to compare
- *          3  :  n = maximum characters to compare
- *
- * Returns     :  0 if s1==s2, Negative if s1<s2, Positive if s1>s2
- *
- *********************************************************************/
-int strncmpic(const char *s1, const char *s2, size_t n)
-{
-   if (n <= (size_t)0) return(0);
-   if (!s1) s1 = "";
-   if (!s2) s2 = "";
-   
-   while (*s1 && *s2)
-   {
-      if ( ( *s1 != *s2 ) && ( ijb_tolower(*s1) != ijb_tolower(*s2) ) )
-      {
-         break;
-      }
-
-      if (--n <= (size_t)0) break;
-
-      s1++, s2++;
-   }
-   return(ijb_tolower(*s1) - ijb_tolower(*s2));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  chomp
- *
- * Description :  In-situ-eliminate all leading and trailing whitespace
- *                from a string.
- *
- * Parameters  :
- *          1  :  s : string to be chomped.
- *
- * Returns     :  chomped string
- *
- *********************************************************************/
-char *chomp(char *string)
-{
-   char *p, *q, *r;
-
-   /* 
-    * strip trailing whitespace
-    */
-   p = string + strlen(string);
-   while (p > string && ijb_isspace(*(p-1)))
-   {
-      p--;
-   }
-   *p = '\0';
-
-   /* 
-    * find end of leading whitespace 
-    */
-   q = r = string;
-   while (*q && ijb_isspace(*q))
-   {
-      q++;
-   }
-
-   /*
-    * if there was any, move the rest forwards
-    */
-   if (q != string)
-   {
-      while (q <= p)
-      {
-         *r++ = *q++;
-      }
-   }
-
-   return(string);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  string_append
- *
- * Description :  Reallocate target_string and append text to it.  
- *                This makes it easier to append to malloc'd strings.
- *                This is similar to the (removed) strsav(), but
- *                running out of memory isn't catastrophic.
- *
- *                Programming style:
- *
- *                The following style provides sufficient error
- *                checking for this routine, with minimal clutter
- *                in the source code.  It is recommended if you
- *                have many calls to this function:
- *
- *                char * s = strdup(...); // don't check for error
- *                string_append(&s, ...);  // don't check for error
- *                string_append(&s, ...);  // don't check for error
- *                string_append(&s, ...);  // don't check for error
- *                if (NULL == s) { ... handle error ... }
- *
- *                OR, equivalently:
- *
- *                char * s = strdup(...); // don't check for error
- *                string_append(&s, ...);  // don't check for error
- *                string_append(&s, ...);  // don't check for error
- *                if (string_append(&s, ...)) {... handle error ...}
- *
- * Parameters  :
- *          1  :  target_string = Pointer to old text that is to be
- *                extended.  *target_string will be free()d by this
- *                routine.  target_string must be non-NULL.
- *                If *target_string is NULL, this routine will
- *                do nothing and return with an error - this allows
- *                you to make many calls to this routine and only
- *                check for errors after the last one.
- *          2  :  text_to_append = Text to be appended to old.
- *                Must not be NULL.
- *
- * Returns     :  JB_ERR_OK on success, and sets *target_string
- *                   to newly malloc'ed appended string.  Caller
- *                   must free(*target_string).
- *                JB_ERR_MEMORY on out-of-memory.  (And free()s
- *                   *target_string and sets it to NULL).
- *                JB_ERR_MEMORY if *target_string is NULL.
- *
- *********************************************************************/
-jb_err string_append(char **target_string, const char *text_to_append)
-{
-   size_t old_len;
-   char *new_string;
-   size_t new_size;
-
-   assert(target_string);
-   assert(text_to_append);
-
-   if (*target_string == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   if (*text_to_append == '\0')
-   {
-      return JB_ERR_OK;
-   }
-
-   old_len = strlen(*target_string);
-
-   new_size = strlen(text_to_append) + old_len + 1;
-
-   if (NULL == (new_string = realloc(*target_string, new_size)))
-   {
-      free(*target_string);
-
-      *target_string = NULL;
-      return JB_ERR_MEMORY;
-   }
-
-   strlcpy(new_string + old_len, text_to_append, new_size - old_len);
-
-   *target_string = new_string;
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  string_join
- *
- * Description :  Join two strings together.  Frees BOTH the original
- *                strings.  If either or both input strings are NULL,
- *                fails as if it had run out of memory.
- *
- *                For comparison, string_append requires that the
- *                second string is non-NULL, and doesn't free it.
- *
- *                Rationale: Too often, we want to do
- *                string_append(s, html_encode(s2)).  That assert()s
- *                if s2 is NULL or if html_encode() runs out of memory.
- *                It also leaks memory.  Proper checking is cumbersome.
- *                The solution: string_join(s, html_encode(s2)) is safe,
- *                and will free the memory allocated by html_encode().
- *
- * Parameters  :
- *          1  :  target_string = Pointer to old text that is to be
- *                extended.  *target_string will be free()d by this
- *                routine.  target_string must be non-NULL.
- *          2  :  text_to_append = Text to be appended to old.
- *
- * Returns     :  JB_ERR_OK on success, and sets *target_string
- *                   to newly malloc'ed appended string.  Caller
- *                   must free(*target_string).
- *                JB_ERR_MEMORY on out-of-memory, or if
- *                   *target_string or text_to_append is NULL.  (In
- *                   this case, frees *target_string and text_to_append,
- *                   sets *target_string to NULL).
- *
- *********************************************************************/
-jb_err string_join(char **target_string, char *text_to_append)
-{
-   jb_err err;
-
-   assert(target_string);
-
-   if (text_to_append == NULL)
-   {
-      freez(*target_string);
-      return JB_ERR_MEMORY;
-   }
-
-   err = string_append(target_string, text_to_append);
-
-   freez(text_to_append);
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  string_toupper
- *
- * Description :  Produce a copy of string with all convertible
- *                characters converted to uppercase.
- *
- * Parameters  :
- *          1  :  string = string to convert
- *
- * Returns     :  Uppercase copy of string if possible, 
- *                NULL on out-of-memory or if string was NULL.
- *
- *********************************************************************/
-char *string_toupper(const char *string)
-{
-   char *result, *p;
-   const char *q;
-
-   if (!string || ((result = (char *) zalloc(strlen(string) + 1)) == NULL))
-   {
-      return NULL;
-   }
-   
-   q = string;
-   p = result;
-
-   while (*q != '\0')
-   {
-      *p++ = (char)toupper((int) *q++);
-   }
-
-   return result;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  bindup
- *
- * Description :  Duplicate the first n characters of a string that may
- *                contain '\0' characters.
- *
- * Parameters  :
- *          1  :  string = string to be duplicated
- *          2  :  len = number of bytes to duplicate
- *
- * Returns     :  pointer to copy, or NULL if failiure
- *
- *********************************************************************/
-char *bindup(const char *string, size_t len)
-{
-   char *duplicate;
-
-   if (NULL == (duplicate = (char *)malloc(len)))
-   {
-      return NULL;
-   }
-   else
-   {
-     memcpy(duplicate, string, len);
-   }
-
-   return duplicate;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  make_path
- *
- * Description :  Takes a directory name and a file name, returns 
- *                the complete path.  Handles windows/unix differences.
- *                If the file name is already an absolute path, or if
- *                the directory name is NULL or empty, it returns 
- *                the filename. 
- *
- * Parameters  :
- *          1  :  dir: Name of directory or NULL for none.
- *          2  :  file: Name of file.  Should not be NULL or empty.
- *
- * Returns     :  "dir/file" (Or on windows, "dir\file").
- *                It allocates the string on the heap.  Caller frees.
- *                Returns NULL in error (i.e. NULL file or out of
- *                memory) 
- *
- *********************************************************************/
-char * make_path(const char * dir, const char * file)
-{
-#ifdef AMIGA
-   char path[512];
-
-   if(dir)
-   {
-      if(dir[0] == '.')
-      {
-         if(dir[1] == '/')
-         {
-            strncpy(path,dir+2,512);
-         }
-         else
-         {
-            strncpy(path,dir+1,512);
-         }
-      }
-      else
-      {
-         strncpy(path,dir,512);
-      }
-      path[511]=0;
-   }
-   else
-   {
-      path[0]=0;
-   }
-   if(AddPart(path,file,512))
-   {
-      return strdup(path);
-   }
-   else
-   {
-      return NULL;
-   }
-#else /* ndef AMIGA */
-
-   if ((file == NULL) || (*file == '\0'))
-   {
-      return NULL; /* Error */
-   }
-
-   if ((dir == NULL) || (*dir == '\0') /* No directory specified */
-#if defined(_WIN32) || defined(__OS2__)
-      || (*file == '\\') || (file[1] == ':') /* Absolute path (DOS) */
-#else /* ifndef _WIN32 || __OS2__ */
-      || (*file == '/') /* Absolute path (U*ix) */
-#endif /* ifndef _WIN32 || __OS2__  */
-      )
-   {
-      return strdup(file);
-   }
-   else
-   {
-      char * path;
-      size_t path_size = strlen(dir) + strlen(file) + 2; /* +2 for trailing (back)slash and \0 */
-
-#if defined(unix)
-      if ( *dir != '/' && basedir && *basedir )
-      {
-         /*
-          * Relative path, so start with the base directory.
-          */
-         path_size += strlen(basedir) + 1; /* +1 for the slash */
-         path = malloc(path_size);
-         if (!path ) log_error(LOG_LEVEL_FATAL, "malloc failed!");
-         strlcpy(path, basedir, path_size);
-         strlcat(path, "/", path_size);
-         strlcat(path, dir, path_size);
-      }
-      else
-#endif /* defined unix */
-      {
-         path = malloc(path_size);
-         if (!path ) log_error(LOG_LEVEL_FATAL, "malloc failed!");
-         strlcpy(path, dir, path_size);
-      }
-
-#if defined(_WIN32) || defined(__OS2__)
-      if(path[strlen(path)-1] != '\\')
-      {
-         strlcat(path, "\\", path_size);
-      }
-#else /* ifndef _WIN32 || __OS2__ */
-      if(path[strlen(path)-1] != '/')
-      {
-         strlcat(path, "/", path_size);
-      }
-#endif /* ifndef _WIN32 || __OS2__ */
-      strlcat(path, file, path_size);
-
-      return path;
-   }
-#endif /* ndef AMIGA */
-}
-
-
-/*********************************************************************
- *
- * Function    :  pick_from_range
- *
- * Description :  Pick a positive number out of a given range.
- *                Should only be used if randomness would be nice,
- *                but isn't really necessary.
- *
- * Parameters  :
- *          1  :  range: Highest possible number to pick.
- *
- * Returns     :  Picked number. 
- *
- *********************************************************************/
-long int pick_from_range(long int range)
-{
-   long int number;
-#ifdef _WIN32
-   static unsigned long seed = 0;
-#endif /* def _WIN32 */
-
-   assert(range != 0);
-   assert(range > 0);
-
-   if (range <= 0) return 0;
-
-#ifdef HAVE_RANDOM
-   number = random() % range + 1; 
-#elif defined(MUTEX_LOCKS_AVAILABLE)
-   privoxy_mutex_lock(&rand_mutex);
-#ifdef _WIN32
-   if (!seed)
-   {
-      seed = (unsigned long)(GetCurrentThreadId()+GetTickCount());
-   }
-   srand(seed);
-   seed = (unsigned long)((rand() << 16) + rand());
-#endif /* def _WIN32 */
-   number = (unsigned long)((rand() << 16) + (rand())) % (unsigned long)(range + 1);
-   privoxy_mutex_unlock(&rand_mutex);
-#else
-   /*
-    * XXX: Which platforms reach this and are there
-    * better options than just using rand() and hoping
-    * that it's safe?
-    */
-   log_error(LOG_LEVEL_INFO, "No thread-safe PRNG available? Header time randomization "
-      "might cause crashes, predictable results or even combine these fine options.");
-   number = rand() % (long int)(range + 1);
-
-#endif /* (def HAVE_RANDOM) */
-
-   return number;
-}
-
-
-#ifdef USE_PRIVOXY_STRLCPY
-/*********************************************************************
- *
- * Function    :  privoxy_strlcpy
- *
- * Description :  strlcpy(3) look-alike for those without decent libc.
- *
- * Parameters  :
- *          1  :  destination: buffer to copy into.
- *          2  :  source: String to copy.
- *          3  :  size: Size of destination buffer.
- *
- * Returns     :  The length of the string that privoxy_strlcpy() tried to create.
- *
- *********************************************************************/
-size_t privoxy_strlcpy(char *destination, const char *source, const size_t size)
-{
-   if (0 < size)
-   {
-      snprintf(destination, size, "%s", source);
-      /*
-       * Platforms that lack strlcpy() also tend to have
-       * a broken snprintf implementation that doesn't
-       * guarantee nul termination.
-       *
-       * XXX: the configure script should detect and reject those.
-       */
-      destination[size-1] = '\0';
-   }
-   return strlen(source);
-}
-#endif /* def USE_PRIVOXY_STRLCPY */
-
-
-#ifndef HAVE_STRLCAT
-/*********************************************************************
- *
- * Function    :  privoxy_strlcat
- *
- * Description :  strlcat(3) look-alike for those without decent libc.
- *
- * Parameters  :
- *          1  :  destination: C string.
- *          2  :  source: String to copy.
- *          3  :  size: Size of destination buffer.
- *
- * Returns     :  The length of the string that privoxy_strlcat() tried to create.
- *
- *********************************************************************/
-size_t privoxy_strlcat(char *destination, const char *source, const size_t size)
-{
-   const size_t old_length = strlen(destination);
-   return old_length + strlcpy(destination + old_length, source, size - old_length);
-}
-#endif /* ndef HAVE_STRLCAT */
-
-
-#if !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV)
-/*********************************************************************
- *
- * Function    :  timegm
- *
- * Description :  libc replacement function for the inverse of gmtime().
- *                Copyright (C) 2004 Free Software Foundation, Inc.
- *
- *                Code originally copied from GnuPG, modifications done
- *                for Privoxy: style changed, #ifdefs for _WIN32 added
- *                to have it work on mingw32.
- *
- *                XXX: It's very unlikely to happen, but if the malloc()
- *                call fails the time zone will be permanently set to UTC.
- *
- * Parameters  :
- *          1  :  tm: Broken-down time struct.
- *
- * Returns     :  tm converted into time_t seconds. 
- *
- *********************************************************************/
-time_t timegm(struct tm *tm)
-{
-   time_t answer;
-   char *zone;
-
-   zone = getenv("TZ");
-   putenv("TZ=UTC");
-   tzset();
-   answer = mktime(tm);
-   if (zone)
-   {
-      char *old_zone;
-
-      old_zone = malloc(3 + strlen(zone) + 1);
-      if (old_zone)
-      {
-         strcpy(old_zone, "TZ=");
-         strcat(old_zone, zone);
-         putenv(old_zone);
-#ifdef _WIN32
-         free(old_zone);
-#endif /* def _WIN32 */
-      }
-   }
-   else
-   {
-#ifdef HAVE_UNSETENV
-      unsetenv("TZ");
-#elif defined(_WIN32)
-      putenv("TZ=");
-#else
-      putenv("TZ");
-#endif
-   }
-   tzset();
-
-   return answer;
-}
-#endif /* !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) */
-
-
-#ifndef HAVE_SNPRINTF
-/*
- * What follows is a portable snprintf routine, written by Mark Martinec.
- * See: http://www.ijs.si/software/snprintf/
-
-                                  snprintf.c
-                   - a portable implementation of snprintf,
-       including vsnprintf.c, asnprintf, vasnprintf, asprintf, vasprintf
-                                       
-   snprintf is a routine to convert numeric and string arguments to
-   formatted strings. It is similar to sprintf(3) provided in a system's
-   C library, yet it requires an additional argument - the buffer size -
-   and it guarantees never to store anything beyond the given buffer,
-   regardless of the format or arguments to be formatted. Some newer
-   operating systems do provide snprintf in their C library, but many do
-   not or do provide an inadequate (slow or idiosyncratic) version, which
-   calls for a portable implementation of this routine.
-
-Author
-
-   Mark Martinec <mark.martinec@xxxxxx>, April 1999, June 2000
-   Copyright © 1999, Mark Martinec
-
- */
-
-#define PORTABLE_SNPRINTF_VERSION_MAJOR 2
-#define PORTABLE_SNPRINTF_VERSION_MINOR 2
-
-#if defined(NEED_ASPRINTF) || defined(NEED_ASNPRINTF) || defined(NEED_VASPRINTF) || defined(NEED_VASNPRINTF)
-# if defined(NEED_SNPRINTF_ONLY)
-# undef NEED_SNPRINTF_ONLY
-# endif
-# if !defined(PREFER_PORTABLE_SNPRINTF)
-# define PREFER_PORTABLE_SNPRINTF
-# endif
-#endif
-
-#if defined(SOLARIS_BUG_COMPATIBLE) && !defined(SOLARIS_COMPATIBLE)
-#define SOLARIS_COMPATIBLE
-#endif
-
-#if defined(HPUX_BUG_COMPATIBLE) && !defined(HPUX_COMPATIBLE)
-#define HPUX_COMPATIBLE
-#endif
-
-#if defined(DIGITAL_UNIX_BUG_COMPATIBLE) && !defined(DIGITAL_UNIX_COMPATIBLE)
-#define DIGITAL_UNIX_COMPATIBLE
-#endif
-
-#if defined(PERL_BUG_COMPATIBLE) && !defined(PERL_COMPATIBLE)
-#define PERL_COMPATIBLE
-#endif
-
-#if defined(LINUX_BUG_COMPATIBLE) && !defined(LINUX_COMPATIBLE)
-#define LINUX_COMPATIBLE
-#endif
-
-#include <sys/types.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <errno.h>
-
-#ifdef isdigit
-#undef isdigit
-#endif
-#define isdigit(c) ((c) >= '0' && (c) <= '9')
-
-/* For copying strings longer or equal to 'breakeven_point'
- * it is more efficient to call memcpy() than to do it inline.
- * The value depends mostly on the processor architecture,
- * but also on the compiler and its optimization capabilities.
- * The value is not critical, some small value greater than zero
- * will be just fine if you don't care to squeeze every drop
- * of performance out of the code.
- *
- * Small values favor memcpy, large values favor inline code.
- */
-#if defined(__alpha__) || defined(__alpha)
-#  define breakeven_point   2    /* AXP (DEC Alpha)     - gcc or cc or egcs */
-#endif
-#if defined(__i386__)  || defined(__i386)
-#  define breakeven_point  12    /* Intel Pentium/Linux - gcc 2.96 */
-#endif
-#if defined(__hppa)
-#  define breakeven_point  10    /* HP-PA               - gcc */
-#endif
-#if defined(__sparc__) || defined(__sparc)
-#  define breakeven_point  33    /* Sun Sparc 5         - gcc 2.8.1 */
-#endif
-
-/* some other values of possible interest: */
-/* #define breakeven_point  8 */ /* VAX 4000          - vaxc */
-/* #define breakeven_point 19 */ /* VAX 4000          - gcc 2.7.0 */
-
-#ifndef breakeven_point
-#  define breakeven_point   6    /* some reasonable one-size-fits-all value */
-#endif
-
-#define fast_memcpy(d,s,n) \
-  { register size_t nn = (size_t)(n); \
-    if (nn >= breakeven_point) memcpy((d), (s), nn); \
-    else if (nn > 0) { /* proc call overhead is worth only for large strings*/\
-      register char *dd; register const char *ss; \
-      for (ss=(s), dd=(d); nn>0; nn--) *dd++ = *ss++; } }
-
-#define fast_memset(d,c,n) \
-  { register size_t nn = (size_t)(n); \
-    if (nn >= breakeven_point) memset((d), (int)(c), nn); \
-    else if (nn > 0) { /* proc call overhead is worth only for large strings*/\
-      register char *dd; register const int cc=(int)(c); \
-      for (dd=(d); nn>0; nn--) *dd++ = cc; } }
-
-/* prototypes */
-
-#if defined(NEED_ASPRINTF)
-int asprintf   (char **ptr, const char *fmt, /*args*/ ...);
-#endif
-#if defined(NEED_VASPRINTF)
-int vasprintf  (char **ptr, const char *fmt, va_list ap);
-#endif
-#if defined(NEED_ASNPRINTF)
-int asnprintf  (char **ptr, size_t str_m, const char *fmt, /*args*/ ...);
-#endif
-#if defined(NEED_VASNPRINTF)
-int vasnprintf (char **ptr, size_t str_m, const char *fmt, va_list ap);
-#endif
-
-#if defined(HAVE_SNPRINTF)
-/* declare our portable snprintf  routine under name portable_snprintf  */
-/* declare our portable vsnprintf routine under name portable_vsnprintf */
-#else
-/* declare our portable routines under names snprintf and vsnprintf */
-#define portable_snprintf snprintf
-#if !defined(NEED_SNPRINTF_ONLY)
-#define portable_vsnprintf vsnprintf
-#endif
-#endif
-
-#if !defined(HAVE_SNPRINTF) || defined(PREFER_PORTABLE_SNPRINTF)
-int portable_snprintf(char *str, size_t str_m, const char *fmt, /*args*/ ...);
-#if !defined(NEED_SNPRINTF_ONLY)
-int portable_vsnprintf(char *str, size_t str_m, const char *fmt, va_list ap);
-#endif
-#endif
-
-/* declarations */
-
-static char credits[] = "\n\
-@(#)snprintf.c, v2.2: Mark Martinec, <mark.martinec@xxxxxx>\n\
-@(#)snprintf.c, v2.2: Copyright 1999, Mark Martinec. Frontier Artistic License applies.\n\
-@(#)snprintf.c, v2.2: http://www.ijs.si/software/snprintf/\n";;
-
-#if defined(NEED_ASPRINTF)
-int asprintf(char **ptr, const char *fmt, /*args*/ ...) {
-  va_list ap;
-  size_t str_m;
-  int str_l;
-
-  *ptr = NULL;
-  va_start(ap, fmt);                            /* measure the required size */
-  str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap);
-  va_end(ap);
-  assert(str_l >= 0);        /* possible integer overflow if str_m > INT_MAX */
-  *ptr = (char *) malloc(str_m = (size_t)str_l + 1);
-  if (*ptr == NULL) { errno = ENOMEM; str_l = -1; }
-  else {
-    int str_l2;
-    va_start(ap, fmt);
-    str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap);
-    va_end(ap);
-    assert(str_l2 == str_l);
-  }
-  return str_l;
-}
-#endif
-
-#if defined(NEED_VASPRINTF)
-int vasprintf(char **ptr, const char *fmt, va_list ap) {
-  size_t str_m;
-  int str_l;
-
-  *ptr = NULL;
-  { va_list ap2;
-    va_copy(ap2, ap);  /* don't consume the original ap, we'll need it again */
-    str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap2);/*get required size*/
-    va_end(ap2);
-  }
-  assert(str_l >= 0);        /* possible integer overflow if str_m > INT_MAX */
-  *ptr = (char *) malloc(str_m = (size_t)str_l + 1);
-  if (*ptr == NULL) { errno = ENOMEM; str_l = -1; }
-  else {
-    int str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap);
-    assert(str_l2 == str_l);
-  }
-  return str_l;
-}
-#endif
-
-#if defined(NEED_ASNPRINTF)
-int asnprintf (char **ptr, size_t str_m, const char *fmt, /*args*/ ...) {
-  va_list ap;
-  int str_l;
-
-  *ptr = NULL;
-  va_start(ap, fmt);                            /* measure the required size */
-  str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap);
-  va_end(ap);
-  assert(str_l >= 0);        /* possible integer overflow if str_m > INT_MAX */
-  if ((size_t)str_l + 1 < str_m) str_m = (size_t)str_l + 1;      /* truncate */
-  /* if str_m is 0, no buffer is allocated, just set *ptr to NULL */
-  if (str_m == 0) {  /* not interested in resulting string, just return size */
-  } else {
-    *ptr = (char *) malloc(str_m);
-    if (*ptr == NULL) { errno = ENOMEM; str_l = -1; }
-    else {
-      int str_l2;
-      va_start(ap, fmt);
-      str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap);
-      va_end(ap);
-      assert(str_l2 == str_l);
-    }
-  }
-  return str_l;
-}
-#endif
-
-#if defined(NEED_VASNPRINTF)
-int vasnprintf (char **ptr, size_t str_m, const char *fmt, va_list ap) {
-  int str_l;
-
-  *ptr = NULL;
-  { va_list ap2;
-    va_copy(ap2, ap);  /* don't consume the original ap, we'll need it again */
-    str_l = portable_vsnprintf(NULL, (size_t)0, fmt, ap2);/*get required size*/
-    va_end(ap2);
-  }
-  assert(str_l >= 0);        /* possible integer overflow if str_m > INT_MAX */
-  if ((size_t)str_l + 1 < str_m) str_m = (size_t)str_l + 1;      /* truncate */
-  /* if str_m is 0, no buffer is allocated, just set *ptr to NULL */
-  if (str_m == 0) {  /* not interested in resulting string, just return size */
-  } else {
-    *ptr = (char *) malloc(str_m);
-    if (*ptr == NULL) { errno = ENOMEM; str_l = -1; }
-    else {
-      int str_l2 = portable_vsnprintf(*ptr, str_m, fmt, ap);
-      assert(str_l2 == str_l);
-    }
-  }
-  return str_l;
-}
-#endif
-
-/*
- * If the system does have snprintf and the portable routine is not
- * specifically required, this module produces no code for snprintf/vsnprintf.
- */
-#if !defined(HAVE_SNPRINTF) || defined(PREFER_PORTABLE_SNPRINTF)
-
-#if !defined(NEED_SNPRINTF_ONLY)
-int portable_snprintf(char *str, size_t str_m, const char *fmt, /*args*/ ...) {
-  va_list ap;
-  int str_l;
-
-  va_start(ap, fmt);
-  str_l = portable_vsnprintf(str, str_m, fmt, ap);
-  va_end(ap);
-  return str_l;
-}
-#endif
-
-#if defined(NEED_SNPRINTF_ONLY)
-int portable_snprintf(char *str, size_t str_m, const char *fmt, /*args*/ ...) {
-#else
-int portable_vsnprintf(char *str, size_t str_m, const char *fmt, va_list ap) {
-#endif
-
-#if defined(NEED_SNPRINTF_ONLY)
-  va_list ap;
-#endif
-  size_t str_l = 0;
-  const char *p = fmt;
-
-/* In contrast with POSIX, the ISO C99 now says
- * that str can be NULL and str_m can be 0.
- * This is more useful than the old:  if (str_m < 1) return -1; */
-
-#if defined(NEED_SNPRINTF_ONLY)
-  va_start(ap, fmt);
-#endif
-  if (!p) p = "";
-  while (*p) {
-    if (*p != '%') {
-   /* if (str_l < str_m) str[str_l++] = *p++;    -- this would be sufficient */
-   /* but the following code achieves better performance for cases
-    * where format string is long and contains few conversions */
-      const char *q = strchr(p+1,'%');
-      size_t n = !q ? strlen(p) : (q-p);
-      if (str_l < str_m) {
-        size_t avail = str_m-str_l;
-        fast_memcpy(str+str_l, p, (n>avail?avail:n));
-      }
-      p += n; str_l += n;
-    } else {
-      const char *starting_p;
-      size_t min_field_width = 0, precision = 0;
-      int zero_padding = 0, precision_specified = 0, justify_left = 0;
-      int alternate_form = 0, force_sign = 0;
-      int space_for_positive = 1; /* If both the ' ' and '+' flags appear,
-                                     the ' ' flag should be ignored. */
-      char length_modifier = '\0';            /* allowed values: \0, h, l, L */
-      char tmp[32];/* temporary buffer for simple numeric->string conversion */
-
-      const char *str_arg;      /* string address in case of string argument */
-      size_t str_arg_l;         /* natural field width of arg without padding
-                                   and sign */
-      unsigned char uchar_arg;
-        /* unsigned char argument value - only defined for c conversion.
-           N.B. standard explicitly states the char argument for
-           the c conversion is unsigned */
-
-      size_t number_of_zeros_to_pad = 0;
-        /* number of zeros to be inserted for numeric conversions
-           as required by the precision or minimal field width */
-
-      size_t zero_padding_insertion_ind = 0;
-        /* index into tmp where zero padding is to be inserted */
-
-      char fmt_spec = '\0';
-        /* current conversion specifier character */
-
-      str_arg = credits;/* just to make compiler happy (defined but not used)*/
-      str_arg = NULL;
-      starting_p = p; p++;  /* skip '%' */
-   /* parse flags */
-      while (*p == '0' || *p == '-' || *p == '+' ||
-             *p == ' ' || *p == '#' || *p == '\'') {
-        switch (*p) {
-        case '0': zero_padding = 1; break;
-        case '-': justify_left = 1; break;
-        case '+': force_sign = 1; space_for_positive = 0; break;
-        case ' ': force_sign = 1;
-     /* If both the ' ' and '+' flags appear, the ' ' flag should be ignored */
-#ifdef PERL_COMPATIBLE
-     /* ... but in Perl the last of ' ' and '+' applies */
-                  space_for_positive = 1;
-#endif
-                  break;
-        case '#': alternate_form = 1; break;
-        case '\'': break;
-        }
-        p++;
-      }
-   /* If the '0' and '-' flags both appear, the '0' flag should be ignored. */
-
-   /* parse field width */
-      if (*p == '*') {
-        int j;
-        p++; j = va_arg(ap, int);
-        if (j >= 0) min_field_width = j;
-        else { min_field_width = -j; justify_left = 1; }
-      } else if (isdigit((int)(*p))) {
-        /* size_t could be wider than unsigned int;
-           make sure we treat argument like common implementations do */
-        unsigned int uj = *p++ - '0';
-        while (isdigit((int)(*p))) uj = 10*uj + (unsigned int)(*p++ - '0');
-        min_field_width = uj;
-      }
-   /* parse precision */
-      if (*p == '.') {
-        p++; precision_specified = 1;
-        if (*p == '*') {
-          int j = va_arg(ap, int);
-          p++;
-          if (j >= 0) precision = j;
-          else {
-            precision_specified = 0; precision = 0;
-         /* NOTE:
-          *   Solaris 2.6 man page claims that in this case the precision
-          *   should be set to 0.  Digital Unix 4.0, HPUX 10 and BSD man page
-          *   claim that this case should be treated as unspecified precision,
-          *   which is what we do here.
-          */
-          }
-        } else if (isdigit((int)(*p))) {
-          /* size_t could be wider than unsigned int;
-             make sure we treat argument like common implementations do */
-          unsigned int uj = *p++ - '0';
-          while (isdigit((int)(*p))) uj = 10*uj + (unsigned int)(*p++ - '0');
-          precision = uj;
-        }
-      }
-   /* parse 'h', 'l' and 'll' length modifiers */
-      if (*p == 'h' || *p == 'l') {
-        length_modifier = *p; p++;
-        if (length_modifier == 'l' && *p == 'l') {   /* double l = long long */
-#ifdef SNPRINTF_LONGLONG_SUPPORT
-          length_modifier = '2';                  /* double l encoded as '2' */
-#else
-          length_modifier = 'l';                 /* treat it as a single 'l' */
-#endif
-          p++;
-        }
-      }
-      fmt_spec = *p;
-   /* common synonyms: */
-      switch (fmt_spec) {
-      case 'i': fmt_spec = 'd'; break;
-      case 'D': fmt_spec = 'd'; length_modifier = 'l'; break;
-      case 'U': fmt_spec = 'u'; length_modifier = 'l'; break;
-      case 'O': fmt_spec = 'o'; length_modifier = 'l'; break;
-      default: break;
-      }
-   /* get parameter value, do initial processing */
-      switch (fmt_spec) {
-      case '%': /* % behaves similar to 's' regarding flags and field widths */
-      case 'c': /* c behaves similar to 's' regarding flags and field widths */
-      case 's':
-        length_modifier = '\0';          /* wint_t and wchar_t not supported */
-     /* the result of zero padding flag with non-numeric conversion specifier*/
-     /* is undefined. Solaris and HPUX 10 does zero padding in this case,    */
-     /* Digital Unix and Linux does not. */
-#if !defined(SOLARIS_COMPATIBLE) && !defined(HPUX_COMPATIBLE)
-        zero_padding = 0;    /* turn zero padding off for string conversions */
-#endif
-        str_arg_l = 1;
-        switch (fmt_spec) {
-        case '%':
-          str_arg = p; break;
-        case 'c': {
-          int j = va_arg(ap, int);
-          uchar_arg = (unsigned char) j;   /* standard demands unsigned char */
-          str_arg = (const char *) &uchar_arg;
-          break;
-        }
-        case 's':
-          str_arg = va_arg(ap, const char *);
-          if (!str_arg) str_arg_l = 0;
-       /* make sure not to address string beyond the specified precision !!! */
-          else if (!precision_specified) str_arg_l = strlen(str_arg);
-       /* truncate string if necessary as requested by precision */
-          else if (precision == 0) str_arg_l = 0;
-          else {
-       /* memchr on HP does not like n > 2^31  !!! */
-            const char *q = memchr(str_arg, '\0',
-                             precision <= 0x7fffffff ? precision : 0x7fffffff);
-            str_arg_l = !q ? precision : (q-str_arg);
-          }
-          break;
-        default: break;
-        }
-        break;
-      case 'd': case 'u': case 'o': case 'x': case 'X': case 'p': {
-        /* NOTE: the u, o, x, X and p conversion specifiers imply
-                 the value is unsigned;  d implies a signed value */
-
-        int arg_sign = 0;
-          /* 0 if numeric argument is zero (or if pointer is NULL for 'p'),
-            +1 if greater than zero (or nonzero for unsigned arguments),
-            -1 if negative (unsigned argument is never negative) */
-
-        int int_arg = 0;  unsigned int uint_arg = 0;
-          /* only defined for length modifier h, or for no length modifiers */
-
-        long int long_arg = 0;  unsigned long int ulong_arg = 0;
-          /* only defined for length modifier l */
-
-        void *ptr_arg = NULL;
-          /* pointer argument value -only defined for p conversion */
-
-#ifdef SNPRINTF_LONGLONG_SUPPORT
-        long long int long_long_arg = 0;
-        unsigned long long int ulong_long_arg = 0;
-          /* only defined for length modifier ll */
-#endif
-        if (fmt_spec == 'p') {
-        /* HPUX 10: An l, h, ll or L before any other conversion character
-         *   (other than d, i, u, o, x, or X) is ignored.
-         * Digital Unix:
-         *   not specified, but seems to behave as HPUX does.
-         * Solaris: If an h, l, or L appears before any other conversion
-         *   specifier (other than d, i, u, o, x, or X), the behavior
-         *   is undefined. (Actually %hp converts only 16-bits of address
-         *   and %llp treats address as 64-bit data which is incompatible
-         *   with (void *) argument on a 32-bit system).
-         */
-#ifdef SOLARIS_COMPATIBLE
-#  ifdef SOLARIS_BUG_COMPATIBLE
-          /* keep length modifiers even if it represents 'll' */
-#  else
-          if (length_modifier == '2') length_modifier = '\0';
-#  endif
-#else
-          length_modifier = '\0';
-#endif
-          ptr_arg = va_arg(ap, void *);
-          if (ptr_arg != NULL) arg_sign = 1;
-        } else if (fmt_spec == 'd') {  /* signed */
-          switch (length_modifier) {
-          case '\0':
-          case 'h':
-         /* It is non-portable to specify a second argument of char or short
-          * to va_arg, because arguments seen by the called function
-          * are not char or short.  C converts char and short arguments
-          * to int before passing them to a function.
-          */
-            int_arg = va_arg(ap, int);
-            if      (int_arg > 0) arg_sign =  1;
-            else if (int_arg < 0) arg_sign = -1;
-            break;
-          case 'l':
-            long_arg = va_arg(ap, long int);
-            if      (long_arg > 0) arg_sign =  1;
-            else if (long_arg < 0) arg_sign = -1;
-            break;
-#ifdef SNPRINTF_LONGLONG_SUPPORT
-          case '2':
-            long_long_arg = va_arg(ap, long long int);
-            if      (long_long_arg > 0) arg_sign =  1;
-            else if (long_long_arg < 0) arg_sign = -1;
-            break;
-#endif
-          }
-        } else {  /* unsigned */
-          switch (length_modifier) {
-          case '\0':
-          case 'h':
-            uint_arg = va_arg(ap, unsigned int);
-            if (uint_arg) arg_sign = 1;
-            break;
-          case 'l':
-            ulong_arg = va_arg(ap, unsigned long int);
-            if (ulong_arg) arg_sign = 1;
-            break;
-#ifdef SNPRINTF_LONGLONG_SUPPORT
-          case '2':
-            ulong_long_arg = va_arg(ap, unsigned long long int);
-            if (ulong_long_arg) arg_sign = 1;
-            break;
-#endif
-          }
-        }
-        str_arg = tmp; str_arg_l = 0;
-     /* NOTE:
-      *   For d, i, u, o, x, and X conversions, if precision is specified,
-      *   the '0' flag should be ignored. This is so with Solaris 2.6,
-      *   Digital UNIX 4.0, HPUX 10, Linux, FreeBSD, NetBSD; but not with Perl.
-      */
-#ifndef PERL_COMPATIBLE
-        if (precision_specified) zero_padding = 0;
-#endif
-        if (fmt_spec == 'd') {
-          if (force_sign && arg_sign >= 0)
-            tmp[str_arg_l++] = space_for_positive ? ' ' : '+';
-         /* leave negative numbers for sprintf to handle,
-            to avoid handling tricky cases like (short int)(-32768) */
-#ifdef LINUX_COMPATIBLE
-        } else if (fmt_spec == 'p' && force_sign && arg_sign > 0) {
-          tmp[str_arg_l++] = space_for_positive ? ' ' : '+';
-#endif
-        } else if (alternate_form) {
-          if (arg_sign != 0 && (fmt_spec == 'x' || fmt_spec == 'X') )
-            { tmp[str_arg_l++] = '0'; tmp[str_arg_l++] = fmt_spec; }
-         /* alternate form should have no effect for p conversion, but ... */
-#ifdef HPUX_COMPATIBLE
-          else if (fmt_spec == 'p'
-         /* HPUX 10: for an alternate form of p conversion,
-          *          a nonzero result is prefixed by 0x. */
-#ifndef HPUX_BUG_COMPATIBLE
-         /* Actually it uses 0x prefix even for a zero value. */
-                   && arg_sign != 0
-#endif
-                  ) { tmp[str_arg_l++] = '0'; tmp[str_arg_l++] = 'x'; }
-#endif
-        }
-        zero_padding_insertion_ind = str_arg_l;
-        if (!precision_specified) precision = 1;   /* default precision is 1 */
-        if (precision == 0 && arg_sign == 0
-#if defined(HPUX_BUG_COMPATIBLE) || defined(LINUX_COMPATIBLE)
-            && fmt_spec != 'p'
-         /* HPUX 10 man page claims: With conversion character p the result of
-          * converting a zero value with a precision of zero is a null string.
-          * Actually HP returns all zeroes, and Linux returns "(nil)". */
-#endif
-        ) {
-         /* converted to null string */
-         /* When zero value is formatted with an explicit precision 0,
-            the resulting formatted string is empty (d, i, u, o, x, X, p).   */
-        } else {
-          char f[5]; int f_l = 0;
-          f[f_l++] = '%';    /* construct a simple format string for sprintf */
-          if (!length_modifier) { }
-          else if (length_modifier=='2') { f[f_l++] = 'l'; f[f_l++] = 'l'; }
-          else f[f_l++] = length_modifier;
-          f[f_l++] = fmt_spec; f[f_l++] = '\0';
-          if (fmt_spec == 'p') str_arg_l += sprintf(tmp+str_arg_l, f, ptr_arg);
-          else if (fmt_spec == 'd') {  /* signed */
-            switch (length_modifier) {
-            case '\0':
-            case 'h': str_arg_l+=sprintf(tmp+str_arg_l, f, int_arg);  break;
-            case 'l': str_arg_l+=sprintf(tmp+str_arg_l, f, long_arg); break;
-#ifdef SNPRINTF_LONGLONG_SUPPORT
-            case '2': str_arg_l+=sprintf(tmp+str_arg_l,f,long_long_arg); break;
-#endif
-            }
-          } else {  /* unsigned */
-            switch (length_modifier) {
-            case '\0':
-            case 'h': str_arg_l+=sprintf(tmp+str_arg_l, f, uint_arg);  break;
-            case 'l': str_arg_l+=sprintf(tmp+str_arg_l, f, ulong_arg); break;
-#ifdef SNPRINTF_LONGLONG_SUPPORT
-            case '2': str_arg_l+=sprintf(tmp+str_arg_l,f,ulong_long_arg);break;
-#endif
-            }
-          }
-         /* include the optional minus sign and possible "0x"
-            in the region before the zero padding insertion point */
-          if (zero_padding_insertion_ind < str_arg_l &&
-              tmp[zero_padding_insertion_ind] == '-') {
-            zero_padding_insertion_ind++;
-          }
-          if (zero_padding_insertion_ind+1 < str_arg_l &&
-              tmp[zero_padding_insertion_ind]   == '0' &&
-             (tmp[zero_padding_insertion_ind+1] == 'x' ||
-              tmp[zero_padding_insertion_ind+1] == 'X') ) {
-            zero_padding_insertion_ind += 2;
-          }
-        }
-        { size_t num_of_digits = str_arg_l - zero_padding_insertion_ind;
-          if (alternate_form && fmt_spec == 'o'
-#ifdef HPUX_COMPATIBLE                                  /* ("%#.o",0) -> ""  */
-              && (str_arg_l > 0)
-#endif
-#ifdef DIGITAL_UNIX_BUG_COMPATIBLE                      /* ("%#o",0) -> "00" */
-#else
-              /* unless zero is already the first character */
-              && !(zero_padding_insertion_ind < str_arg_l
-                   && tmp[zero_padding_insertion_ind] == '0')
-#endif
-          ) {        /* assure leading zero for alternate-form octal numbers */
-            if (!precision_specified || precision < num_of_digits+1) {
-             /* precision is increased to force the first character to be zero,
-                except if a zero value is formatted with an explicit precision
-                of zero */
-              precision = num_of_digits+1; precision_specified = 1;
-            }
-          }
-       /* zero padding to specified precision? */
-          if (num_of_digits < precision) 
-            number_of_zeros_to_pad = precision - num_of_digits;
-        }
-     /* zero padding to specified minimal field width? */
-        if (!justify_left && zero_padding) {
-          int n = min_field_width - (str_arg_l+number_of_zeros_to_pad);
-          if (n > 0) number_of_zeros_to_pad += n;
-        }
-        break;
-      }
-      default: /* unrecognized conversion specifier, keep format string as-is*/
-        zero_padding = 0;  /* turn zero padding off for non-numeric convers. */
-#ifndef DIGITAL_UNIX_COMPATIBLE
-        justify_left = 1; min_field_width = 0;                /* reset flags */
-#endif
-#if defined(PERL_COMPATIBLE) || defined(LINUX_COMPATIBLE)
-     /* keep the entire format string unchanged */
-        str_arg = starting_p; str_arg_l = p - starting_p;
-     /* well, not exactly so for Linux, which does something inbetween,
-      * and I don't feel an urge to imitate it: "%+++++hy" -> "%+y"  */
-#else
-     /* discard the unrecognized conversion, just keep *
-      * the unrecognized conversion character          */
-        str_arg = p; str_arg_l = 0;
-#endif
-        if (*p) str_arg_l++;  /* include invalid conversion specifier unchanged
-                                 if not at end-of-string */
-        break;
-      }
-      if (*p) p++;      /* step over the just processed conversion specifier */
-   /* insert padding to the left as requested by min_field_width;
-      this does not include the zero padding in case of numerical conversions*/
-      if (!justify_left) {                /* left padding with blank or zero */
-        int n = min_field_width - (str_arg_l+number_of_zeros_to_pad);
-        if (n > 0) {
-          if (str_l < str_m) {
-            size_t avail = str_m-str_l;
-            fast_memset(str+str_l, (zero_padding?'0':' '), (n>avail?avail:n));
-          }
-          str_l += n;
-        }
-      }
-   /* zero padding as requested by the precision or by the minimal field width
-    * for numeric conversions required? */
-      if (number_of_zeros_to_pad <= 0) {
-     /* will not copy first part of numeric right now, *
-      * force it to be copied later in its entirety    */
-        zero_padding_insertion_ind = 0;
-      } else {
-     /* insert first part of numerics (sign or '0x') before zero padding */
-        int n = zero_padding_insertion_ind;
-        if (n > 0) {
-          if (str_l < str_m) {
-            size_t avail = str_m-str_l;
-            fast_memcpy(str+str_l, str_arg, (n>avail?avail:n));
-          }
-          str_l += n;
-        }
-     /* insert zero padding as requested by the precision or min field width */
-        n = number_of_zeros_to_pad;
-        if (n > 0) {
-          if (str_l < str_m) {
-            size_t avail = str_m-str_l;
-            fast_memset(str+str_l, '0', (n>avail?avail:n));
-          }
-          str_l += n;
-        }
-      }
-   /* insert formatted string
-    * (or as-is conversion specifier for unknown conversions) */
-      { int n = str_arg_l - zero_padding_insertion_ind;
-        if (n > 0) {
-          if (str_l < str_m) {
-            size_t avail = str_m-str_l;
-            fast_memcpy(str+str_l, str_arg+zero_padding_insertion_ind,
-                        (n>avail?avail:n));
-          }
-          str_l += n;
-        }
-      }
-   /* insert right padding */
-      if (justify_left) {          /* right blank padding to the field width */
-        int n = min_field_width - (str_arg_l+number_of_zeros_to_pad);
-        if (n > 0) {
-          if (str_l < str_m) {
-            size_t avail = str_m-str_l;
-            fast_memset(str+str_l, ' ', (n>avail?avail:n));
-          }
-          str_l += n;
-        }
-      }
-    }
-  }
-#if defined(NEED_SNPRINTF_ONLY)
-  va_end(ap);
-#endif
-  if (str_m > 0) { /* make sure the string is null-terminated
-                      even at the expense of overwriting the last character
-                      (shouldn't happen, but just in case) */
-    str[str_l <= str_m-1 ? str_l : str_m-1] = '\0';
-  }
-  /* Return the number of characters formatted (excluding trailing null
-   * character), that is, the number of characters that would have been
-   * written to the buffer if it were large enough.
-   *
-   * The value of str_l should be returned, but str_l is of unsigned type
-   * size_t, and snprintf is int, possibly leading to an undetected
-   * integer overflow, resulting in a negative return value, which is illegal.
-   * Both XSH5 and ISO C99 (at least the draft) are silent on this issue.
-   * Should errno be set to EOVERFLOW and EOF returned in this case???
-   */
-  return (int) str_l;
-}
-#endif
-#endif /* ndef HAVE_SNPRINTF */
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/miscutil.h b/external/privoxy/miscutil.h
deleted file mode 100644
index a0498ac..0000000
--- a/external/privoxy/miscutil.h
+++ /dev/null
@@ -1,259 +0,0 @@
-#ifndef MISCUTIL_H_INCLUDED
-#define MISCUTIL_H_INCLUDED
-#define MISCUTIL_H_VERSION "$Id: miscutil.h,v 1.30 2008/04/17 14:53:31 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/miscutil.h,v $
- *
- * Purpose     :  zalloc, hash_string, safe_strerror, strcmpic,
- *                strncmpic, and MinGW32 strdup functions.  These are
- *                each too small to deserve their own file but don't 
- *                really fit in any other file.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: miscutil.h,v $
- *    Revision 1.30  2008/04/17 14:53:31  fabiankeil
- *    Move simplematch() into urlmatch.c as it's only
- *    used to match (old-school) domain patterns.
- *
- *    Revision 1.29  2007/09/09 18:20:20  fabiankeil
- *    Turn privoxy_strlcpy() into a function and try to work with
- *    b0rked snprintf() implementations too. Reported by icmp30.
- *
- *    Revision 1.28  2007/05/11 11:48:16  fabiankeil
- *    - Delete strsav() which was replaced
- *      by string_append() years ago.
- *    - Add a strlcat() look-alike.
- *    - Use strlcat() and strlcpy() in those parts
- *      of the code that are run on unixes.
- *
- *    Revision 1.27  2007/04/09 17:48:51  fabiankeil
- *    Check for HAVE_SNPRINTF instead of __OS2__
- *    before including the portable snprintf() code.
- *
- *    Revision 1.26  2007/04/08 17:04:51  fabiankeil
- *    Add macro for strlcpy() in case the libc lacks it.
- *
- *    Revision 1.25  2007/01/18 15:03:20  fabiankeil
- *    Don't include replacement timegm() if
- *    putenv() or tzset() isn't available.
- *
- *    Revision 1.24  2006/08/17 17:15:10  fabiankeil
- *    - Back to timegm() using GnuPG's replacement if necessary.
- *      Using mktime() and localtime() could add a on hour offset if
- *      the randomize factor was big enough to lead to a summer/wintertime
- *      switch.
- *
- *    - Removed now-useless Privoxy 3.0.3 compatibility glue.
- *
- *    - Moved randomization code into pick_from_range().
- *
- *    - Changed parse_header_time definition.
- *      time_t isn't guaranteed to be signed and
- *      if it isn't, -1 isn't available as error code.
- *      Changed some variable types in client_if_modified_since()
- *      because of the same reason.
- *
- *    Revision 1.23  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.21  2002/04/26 12:55:38  oes
- *    New function string_toupper
- *
- *    Revision 1.20  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.19  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.18  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.17  2002/03/04 18:28:32  oes
- *    Deleted deletePidFile, played syleguide police
- *
- *    Revision 1.16  2002/01/21 00:53:36  jongfoster
- *    Adding string_join()
- *
- *    Revision 1.15  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.14  2001/11/05 21:43:48  steudten
- *    Add global var 'basedir' for unix os.
- *
- *    Revision 1.13  2001/10/29 03:48:10  david__schmidt
- *    OS/2 native needed a snprintf() routine.  Added one to miscutil, brackedted
- *    by and __OS2__ ifdef.
- *
- *    Revision 1.12  2001/10/23 21:27:50  jongfoster
- *    Standardising error codes in string_append
- *    make_path() no longer adds '\\' if the dir already ends in '\\' (this
- *    is just copying a UNIX-specific fix to the Windows-specific part)
- *
- *    Revision 1.11  2001/10/14 22:02:57  jongfoster
- *    New function string_append() which is like strsav(), but running
- *    out of memory isn't automatically FATAL.
- *
- *    Revision 1.10  2001/09/20 13:34:09  steudten
- *
- *    change long to int for prototype hash_string()
- *
- *    Revision 1.9  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.8  2001/06/29 13:32:14  oes
- *    Removed logentry from cancelled commit
- *
- *    Revision 1.7  2001/06/05 22:32:01  jongfoster
- *    New function make_path() to splice directory and file names together.
- *
- *    Revision 1.6  2001/06/03 19:12:30  oes
- *    introduced bindup()
- *
- *    Revision 1.5  2001/06/01 10:31:51  oes
- *    Added character class matching to trivimatch; renamed to simplematch
- *
- *    Revision 1.4  2001/05/31 17:32:31  oes
- *
- *     - Enhanced domain part globbing with infix and prefix asterisk
- *       matching and optional unanchored operation
- *
- *    Revision 1.3  2001/05/29 23:10:09  oes
- *
- *
- *     - Introduced chomp()
- *     - Moved strsav() from showargs to miscutil
- *
- *    Revision 1.2  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:00  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-extern const char *basedir;
-extern void *zalloc(size_t size);
-
-#if defined(unix)
-extern void write_pid_file(void);
-#endif /* unix */
-
-extern unsigned int hash_string(const char* s);
-
-extern char *safe_strerror(int err);
-
-extern int strcmpic(const char *s1, const char *s2);
-extern int strncmpic(const char *s1, const char *s2, size_t n);
-
-extern jb_err string_append(char **target_string, const char *text_to_append);
-extern jb_err string_join  (char **target_string,       char *text_to_append);
-
-extern char *string_toupper(const char *string);
-extern char *chomp(char *string);
-extern char *bindup(const char *string, size_t len);
-
-extern char *make_path(const char * dir, const char * file);
-
-long int pick_from_range(long int range);
-
-#ifdef __MINGW32__
-extern char *strdup(const char *s);
-#endif /* def __MINGW32__ */
-
-#ifndef HAVE_SNPRINTF
-extern int snprintf(char *, size_t, const char *, /*args*/ ...);
-#endif /* ndef HAVE_SNPRINTF */
-
-#if !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV)
-time_t timegm(struct tm *tm);
-#endif /* !defined(HAVE_TIMEGM) && defined(HAVE_TZSET) && defined(HAVE_PUTENV) */
-
-/* Here's looking at you, Ulrich. */
-#if !defined(HAVE_STRLCPY)
-size_t privoxy_strlcpy(char *destination, const char *source, size_t size);
-#define strlcpy privoxy_strlcpy
-#define USE_PRIVOXY_STRLCPY 1
-#define HAVE_STRLCPY 1
-#endif /* ndef HAVE_STRLCPY*/
-
-#ifndef HAVE_STRLCAT
-size_t privoxy_strlcat(char *destination, const char *source, size_t size);
-#define strlcat privoxy_strlcat
-#endif /* ndef HAVE_STRLCAT */
-
-/* Revision control strings from this header and associated .c file */
-extern const char miscutil_rcs[];
-extern const char miscutil_h_rcs[];
-
-#if defined(__cplusplus)
-}
-#endif
-
-#endif /* ndef MISCUTIL_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/mkinstalldirs b/external/privoxy/mkinstalldirs
deleted file mode 100755
index 3f681b3..0000000
--- a/external/privoxy/mkinstalldirs
+++ /dev/null
@@ -1,40 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@xxxxxxxxxxxxxxx>
-# Created: 1993-05-16
-# Public domain
-
-# $Id: mkinstalldirs,v 1.4 2006/07/18 14:48:47 david__schmidt Exp $
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here
diff --git a/external/privoxy/parsers.c b/external/privoxy/parsers.c
deleted file mode 100644
index 021762e..0000000
--- a/external/privoxy/parsers.c
+++ /dev/null
@@ -1,4740 +0,0 @@
-const char parsers_rcs[] = "$Id: parsers.c,v 1.154 2009/03/13 14:10:07 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/parsers.c,v $
- *
- * Purpose     :  Declares functions to parse/crunch headers and pages.
- *                Functions declared include:
- *                   `add_to_iob', `client_cookie_adder', `client_from',
- *                   `client_referrer', `client_send_cookie', `client_ua',
- *                   `client_uagent', `client_x_forwarded',
- *                   `client_x_forwarded_adder', `client_xtra_adder',
- *                   `content_type', `crumble', `destroy_list', `enlist',
- *                   `flush_socket', ``get_header', `sed', `filter_header'
- *                   `server_content_encoding', `server_content_disposition',
- *                   `server_last_modified', `client_accept_language',
- *                   `crunch_client_header', `client_if_modified_since',
- *                   `client_if_none_match', `get_destination_from_headers',
- *                   `parse_header_time', `decompress_iob' and `server_set_cookie'.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: parsers.c,v $
- *    Revision 1.154  2009/03/13 14:10:07  fabiankeil
- *    Fix some more harmless warnings on amd64.
- *
- *    Revision 1.153  2009/03/07 13:09:17  fabiankeil
- *    Change csp->expected_content and_csp->expected_content_length from
- *    size_t to unsigned long long to reduce the likelihood of integer
- *    overflows that would let us close the connection prematurely.
- *    Bug found while investigating #2669131, reported by cyberpatrol.
- *
- *    Revision 1.152  2009/03/01 18:43:48  fabiankeil
- *    Help clang understand that we aren't dereferencing
- *    NULL pointers here.
- *
- *    Revision 1.151  2009/02/15 14:46:35  fabiankeil
- *    Don't let hide-referrer{conditional-*}} pass
- *    Referer headers without http URLs.
- *
- *    Revision 1.150  2008/12/04 18:12:19  fabiankeil
- *    Fix some cparser warnings.
- *
- *    Revision 1.149  2008/11/21 18:39:53  fabiankeil
- *    In case of CONNECT requests there's no point
- *    in trying to keep the connection alive.
- *
- *    Revision 1.148  2008/11/16 12:43:49  fabiankeil
- *    Turn keep-alive support into a runtime feature
- *    that is disabled by setting keep-alive-timeout
- *    to a negative value.
- *
- *    Revision 1.147  2008/11/04 17:20:31  fabiankeil
- *    HTTP/1.1 responses without Connection
- *    header imply keep-alive. Act accordingly.
- *
- *    Revision 1.146  2008/10/12 16:46:35  fabiankeil
- *    Remove obsolete warning about delayed delivery with chunked
- *    transfer encoding and FEATURE_CONNECTION_KEEP_ALIVE enabled.
- *
- *    Revision 1.145  2008/10/09 18:21:41  fabiankeil
- *    Flush work-in-progress changes to keep outgoing connections
- *    alive where possible. Incomplete and mostly #ifdef'd out.
- *
- *    Revision 1.144  2008/09/21 13:59:33  fabiankeil
- *    Treat unknown change-x-forwarded-for parameters as fatal errors.
- *
- *    Revision 1.143  2008/09/21 13:36:52  fabiankeil
- *    If change-x-forwarded-for{add} is used and the client
- *    sends multiple X-Forwarded-For headers, append the client's
- *    IP address to each one of them. "Traditionally" we would
- *    lose all but the last one.
- *
- *    Revision 1.142  2008/09/20 10:04:33  fabiankeil
- *    Remove hide-forwarded-for-headers action which has
- *    been obsoleted by change-x-forwarded-for{block}.
- *
- *    Revision 1.141  2008/09/19 15:26:28  fabiankeil
- *    Add change-x-forwarded-for{} action to block or add
- *    X-Forwarded-For headers. Mostly based on code removed
- *    before 3.0.7.
- *
- *    Revision 1.140  2008/09/12 17:51:43  fabiankeil
- *    - A few style fixes.
- *    - Remove a pointless cast.
- *
- *    Revision 1.139  2008/09/04 08:13:58  fabiankeil
- *    Prepare for critical sections on Windows by adding a
- *    layer of indirection before the pthread mutex functions.
- *
- *    Revision 1.138  2008/08/30 12:03:07  fabiankeil
- *    Remove FEATURE_COOKIE_JAR.
- *
- *    Revision 1.137  2008/05/30 15:50:08  fabiankeil
- *    Remove questionable micro-optimizations
- *    whose usefulness has never been measured.
- *
- *    Revision 1.136  2008/05/26 16:02:24  fabiankeil
- *    s@Insufficent@Insufficient@
- *
- *    Revision 1.135  2008/05/21 20:12:10  fabiankeil
- *    The whole point of strclean() is to modify the
- *    first parameter, so don't mark it immutable,
- *    even though the compiler lets us get away with it.
- *
- *    Revision 1.134  2008/05/21 19:27:25  fabiankeil
- *    As the wafer actions are gone, we can stop including encode.h.
- *
- *    Revision 1.133  2008/05/21 15:50:47  fabiankeil
- *    Ditch cast from (char **) to (char **).
- *
- *    Revision 1.132  2008/05/21 15:47:14  fabiankeil
- *    Streamline sed()'s prototype and declare
- *    the header parse and add structures static.
- *
- *    Revision 1.131  2008/05/20 20:13:30  fabiankeil
- *    Factor update_server_headers() out of sed(), ditch the
- *    first_run hack and make server_patterns_light static.
- *
- *    Revision 1.130  2008/05/19 17:18:04  fabiankeil
- *    Wrap memmove() calls in string_move()
- *    to document the purpose in one place.
- *
- *    Revision 1.129  2008/05/17 14:02:07  fabiankeil
- *    Normalize linear header white space.
- *
- *    Revision 1.128  2008/05/16 16:39:03  fabiankeil
- *    If a header is split across multiple lines,
- *    merge them to a single line before parsing them.
- *
- *    Revision 1.127  2008/05/10 13:23:38  fabiankeil
- *    Don't provide get_header() with the whole client state
- *    structure when it only needs access to csp->iob.
- *
- *    Revision 1.126  2008/05/03 16:40:45  fabiankeil
- *    Change content_filters_enabled()'s parameter from
- *    csp->action to action so it can be also used in the
- *    CGI code. Don't bother checking if there are filters
- *    loaded, as that's somewhat besides the point.
- *
- *    Revision 1.125  2008/04/17 14:40:49  fabiankeil
- *    Provide get_http_time() with the buffer size so it doesn't
- *    have to blindly assume that the buffer is big enough.
- *
- *    Revision 1.124  2008/04/16 16:38:21  fabiankeil
- *    Don't pass the whole csp structure to flush_socket()
- *    when it only needs a file descriptor and a buffer.
- *
- *    Revision 1.123  2008/03/29 12:13:46  fabiankeil
- *    Remove send-wafer and send-vanilla-wafer actions.
- *
- *    Revision 1.122  2008/03/28 15:13:39  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.121  2008/01/05 21:37:03  fabiankeil
- *    Let client_range() also handle Request-Range headers
- *    which apparently are still supported by many servers.
- *
- *    Revision 1.120  2008/01/04 17:43:45  fabiankeil
- *    Improve the warning messages that get logged if the action files
- *    "enable" filters but no filters of that type have been loaded.
- *
- *    Revision 1.119  2007/12/28 18:32:51  fabiankeil
- *    In server_content_type():
- *    - Don't require leading white space when detecting image content types.
- *    - Change '... not replaced ...' message to sound less crazy if the text
- *      type actually is 'text/plain'.
- *    - Mark the 'text/plain == binary data' assumption for removal.
- *    - Remove a bunch of trailing white space.
- *
- *    Revision 1.118  2007/12/28 16:56:35  fabiankeil
- *    Minor server_content_disposition() changes:
- *    - Don't regenerate the header name all lower-case.
- *    - Some white space fixes.
- *    - Remove useless log message in case of ENOMEM.
- *
- *    Revision 1.117  2007/12/06 18:11:50  fabiankeil
- *    Garbage-collect the code to add a X-Forwarded-For
- *    header as it seems to be mostly used by accident.
- *
- *    Revision 1.116  2007/12/01 13:04:22  fabiankeil
- *    Fix a crash on mingw32 with some Last Modified times in the future.
- *
- *    Revision 1.115  2007/11/02 16:52:50  fabiankeil
- *    Remove a "can't happen" error block which, over
- *    time, mutated into a "guaranteed to happen" block.
- *
- *    Revision 1.114  2007/10/19 16:56:26  fabiankeil
- *    - Downgrade "Buffer limit reached" message to LOG_LEVEL_INFO.
- *    - Use shiny new content_filters_enabled() in client_range().
- *
- *    Revision 1.113  2007/10/10 17:29:57  fabiankeil
- *    I forgot about Poland.
- *
- *    Revision 1.112  2007/10/09 16:38:40  fabiankeil
- *    Remove Range and If-Range headers if content filtering is enabled.
- *
- *    Revision 1.111  2007/10/04 18:07:00  fabiankeil
- *    Move ACTION_VANILLA_WAFER handling from jcc's chat() into
- *    client_cookie_adder() to make sure send-vanilla-wafer can be
- *    controlled through tags (and thus regression-tested).
- *
- *    Revision 1.110  2007/09/29 10:42:37  fabiankeil
- *    - Remove "scanning headers for" log message again.
- *    - Some more whitespace fixes.
- *
- *    Revision 1.109  2007/09/08 14:25:48  fabiankeil
- *    Refactor client_referrer() and add conditional-forge parameter.
- *
- *    Revision 1.108  2007/08/28 18:21:03  fabiankeil
- *    A bunch of whitespace fixes, pointy hat to me.
- *
- *    Revision 1.107  2007/08/28 18:16:32  fabiankeil
- *    Fix possible memory corruption in server_http, make sure it's not
- *    executed for ordinary server headers and mark some problems for later.
- *
- *    Revision 1.106  2007/08/18 14:30:32  fabiankeil
- *    Let content-type-overwrite{} honour force-text-mode again.
- *
- *    Revision 1.105  2007/08/11 14:49:49  fabiankeil
- *    - Add prototpyes for the header parsers and make them static.
- *    - Comment out client_accept_encoding_adder() which isn't used right now.
- *
- *    Revision 1.104  2007/07/14 07:38:19  fabiankeil
- *    Move the ACTION_FORCE_TEXT_MODE check out of
- *    server_content_type(). Signal other functions
- *    whether or not a content type has been declared.
- *    Part of the fix for BR#1750917.
- *
- *    Revision 1.103  2007/06/01 16:31:54  fabiankeil
- *    Change sed() to return a jb_err in preparation for forward-override{}.
- *
- *    Revision 1.102  2007/05/27 12:39:32  fabiankeil
- *    Adjust "X-Filter: No" to disable dedicated header filters.
- *
- *    Revision 1.101  2007/05/14 10:16:41  fabiankeil
- *    Streamline client_cookie_adder().
- *
- *    Revision 1.100  2007/04/30 15:53:11  fabiankeil
- *    Make sure filters with dynamic jobs actually use them.
- *
- *    Revision 1.99  2007/04/30 15:06:26  fabiankeil
- *    - Introduce dynamic pcrs jobs that can resolve variables.
- *    - Remove unnecessary update_action_bits_for_all_tags() call.
- *
- *    Revision 1.98  2007/04/17 18:32:10  fabiankeil
- *    - Make tagging based on tags set by earlier taggers
- *      of the same kind possible.
- *    - Log whether or not new tags cause action bits updates
- *      (in which case a matching tag-pattern section exists).
- *    - Log if the user tries to set a tag that is already set.
- *
- *    Revision 1.97  2007/04/15 16:39:21  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.96  2007/04/12 12:53:58  fabiankeil
- *    Log a warning if the content is compressed, filtering is
- *    enabled and Privoxy was compiled without zlib support.
- *    Closes FR#1673938.
- *
- *    Revision 1.95  2007/03/25 14:26:40  fabiankeil
- *    - Fix warnings when compiled with glibc.
- *    - Don't use crumble() for cookie crunching.
- *    - Move cookie time parsing into parse_header_time().
- *    - Let parse_header_time() return a jb_err code
- *      instead of a pointer that can only be used to
- *      check for NULL anyway.
- *
- *    Revision 1.94  2007/03/21 12:23:53  fabiankeil
- *    - Add better protection against malicious gzip headers.
- *    - Stop logging the first hundred bytes of decompressed content.
- *      It looks like it's working and there is always debug 16.
- *    - Log the content size after decompression in decompress_iob()
- *      instead of pcrs_filter_response().
- *
- *    Revision 1.93  2007/03/20 15:21:44  fabiankeil
- *    - Use dedicated header filter actions instead of abusing "filter".
- *      Replace "filter-client-headers" and "filter-client-headers"
- *      with "server-header-filter" and "client-header-filter".
- *    - Remove filter_client_header() and filter_client_header(),
- *      filter_header() now checks the shiny new
- *      CSP_FLAG_CLIENT_HEADER_PARSING_DONE flag instead.
- *
- *    Revision 1.92  2007/03/05 13:25:32  fabiankeil
- *    - Cosmetical changes for LOG_LEVEL_RE_FILTER messages.
- *    - Handle "Cookie:" and "Connection:" headers a bit smarter
- *      (don't crunch them just to recreate them later on).
- *    - Add another non-standard time format for the cookie
- *      expiration date detection.
- *    - Fix a valgrind warning.
- *
- *    Revision 1.91  2007/02/24 12:27:32  fabiankeil
- *    Improve cookie expiration date detection.
- *
- *    Revision 1.90  2007/02/08 19:12:35  fabiankeil
- *    Don't run server_content_length() the first time
- *    sed() parses server headers; only adjust the
- *    Content-Length header if the page was modified.
- *
- *    Revision 1.89  2007/02/07 16:52:11  fabiankeil
- *    Fix log messages regarding the cookie time format
- *    (cookie and request URL were mixed up).
- *
- *    Revision 1.88  2007/02/07 11:27:12  fabiankeil
- *    - Let decompress_iob()
- *      - not corrupt the content if decompression fails
- *        early. (the first byte(s) were lost).
- *      - use pointer arithmetics with defined outcome for
- *        a change.
- *    - Use a different kludge to remember a failed decompression.
- *
- *    Revision 1.87  2007/01/31 16:21:38  fabiankeil
- *    Search for Max-Forwards headers case-insensitive,
- *    don't generate the "501 unsupported" message for invalid
- *    Max-Forwards values and don't increase negative ones.
- *
- *    Revision 1.86  2007/01/30 13:05:26  fabiankeil
- *    - Let server_set_cookie() check the expiration date
- *      of cookies and don't touch the ones that are already
- *      expired. Fixes problems with low quality web applications
- *      as described in BR 932612.
- *
- *    - Adjust comment in client_max_forwards to reality;
- *      remove invalid Max-Forwards headers.
- *
- *    Revision 1.85  2007/01/26 15:33:46  fabiankeil
- *    Stop filter_header() from unintentionally removing
- *    empty header lines that were enlisted by the continue
- *    hack.
- *
- *    Revision 1.84  2007/01/24 12:56:52  fabiankeil
- *    - Repeat the request URL before logging any headers.
- *      Makes reading the log easier in case of simultaneous requests.
- *    - If there are more than one Content-Type headers in one request,
- *      use the first one and remove the others.
- *    - Remove "newval" variable in server_content_type().
- *      It's only used once.
- *
- *    Revision 1.83  2007/01/12 15:03:02  fabiankeil
- *    Correct a cast, check inflateEnd() exit code
- *    to see if we have to, replace sprintf calls
- *    with snprintf.
- *
- *    Revision 1.82  2007/01/01 19:36:37  fabiankeil
- *    Integrate a modified version of Wil Mahan's
- *    zlib patch (PR #895531).
- *
- *    Revision 1.81  2006/12/31 22:21:33  fabiankeil
- *    Skip empty filter files in filter_header()
- *    but don't ignore the ones that come afterwards.
- *    Fixes BR 1619208, this time for real.
- *
- *    Revision 1.80  2006/12/29 19:08:22  fabiankeil
- *    Reverted parts of my last commit
- *    to keep error handling working.
- *
- *    Revision 1.79  2006/12/29 18:04:40  fabiankeil
- *    Fixed gcc43 conversion warnings.
- *
- *    Revision 1.78  2006/12/26 17:19:20  fabiankeil
- *    Bringing back the "useless" localtime() call
- *    I removed in revision 1.67. On some platforms
- *    it's necessary to prevent time zone offsets.
- *
- *    Revision 1.77  2006/12/07 18:44:26  fabiankeil
- *    Rebuild request URL in get_destination_from_headers()
- *    to make sure redirect{pcrs command} works as expected
- *    for intercepted requests.
- *
- *    Revision 1.76  2006/12/06 19:52:25  fabiankeil
- *    Added get_destination_from_headers().
- *
- *    Revision 1.75  2006/11/13 19:05:51  fabiankeil
- *    Make pthread mutex locking more generic. Instead of
- *    checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- *    and use mutex locking unless there is an _r function
- *    available. Better safe than sorry.
- *
- *    Fixes "./configure --disable-pthread" and should result
- *    in less threading-related problems on pthread-using platforms,
- *    but it still doesn't fix BR#1122404.
- *
- *    Revision 1.74  2006/10/02 16:59:12  fabiankeil
- *    The special header "X-Filter: No" now disables
- *    header filtering as well.
- *
- *    Revision 1.73  2006/09/23 13:26:38  roro
- *    Replace TABs by spaces in source code.
- *
- *    Revision 1.72  2006/09/23 12:37:21  fabiankeil
- *    Don't print a log message every time filter_headers is
- *    entered or left. It only creates noise without any real
- *    information.
- *
- *    Revision 1.71  2006/09/21 19:55:17  fabiankeil
- *    Fix +hide-if-modified-since{-n}.
- *
- *    Revision 1.70  2006/09/08 12:06:34  fabiankeil
- *    Have hide-if-modified-since interpret the random
- *    range value as minutes instead of hours. Allows
- *    more fine-grained configuration.
- *
- *    Revision 1.69  2006/09/06 16:25:51  fabiankeil
- *    Always have parse_header_time return a pointer
- *    that actual makes sense, even though we currently
- *    only need it to detect problems.
- *
- *    Revision 1.68  2006/09/06 10:43:32  fabiankeil
- *    Added config option enable-remote-http-toggle
- *    to specify if Privoxy should recognize special
- *    headers (currently only X-Filter) to change its
- *    behaviour. Disabled by default.
- *
- *    Revision 1.67  2006/09/04 11:01:26  fabiankeil
- *    After filtering de-chunked instances, remove
- *    "Transfer-Encoding" header entirely instead of changing
- *    it to "Transfer-Encoding: identity", which is invalid.
- *    Thanks Michael Shields <shields@xxxxxxxx>. Fixes PR 1318658.
- *
- *    Don't use localtime in parse_header_time. An empty time struct
- *    is good enough, it gets overwritten by strptime anyway.
- *
- *    Revision 1.66  2006/09/03 19:38:28  fabiankeil
- *    Use gmtime_r if available, fallback to gmtime with mutex
- *    protection for MacOSX and use vanilla gmtime for the rest.
- *
- *    Revision 1.65  2006/08/22 10:55:56  fabiankeil
- *    Changed client_referrer to use the right type (size_t) for
- *    hostlenght and to shorten the temporary referrer string with
- *    '\0' instead of adding a useless line break.
- *
- *    Revision 1.64  2006/08/17 17:15:10  fabiankeil
- *    - Back to timegm() using GnuPG's replacement if necessary.
- *      Using mktime() and localtime() could add a on hour offset if
- *      the randomize factor was big enough to lead to a summer/wintertime
- *      switch.
- *
- *    - Removed now-useless Privoxy 3.0.3 compatibility glue.
- *
- *    - Moved randomization code into pick_from_range().
- *
- *    - Changed parse_header_time definition.
- *      time_t isn't guaranteed to be signed and
- *      if it isn't, -1 isn't available as error code.
- *      Changed some variable types in client_if_modified_since()
- *      because of the same reason.
- *
- *    Revision 1.63  2006/08/14 13:18:08  david__schmidt
- *    OS/2 compilation compatibility fixups
- *
- *    Revision 1.62  2006/08/14 08:58:42  fabiankeil
- *    Changed include from strptime.c to strptime.h
- *
- *    Revision 1.61  2006/08/14 08:25:19  fabiankeil
- *    Split filter-headers{} into filter-client-headers{}
- *    and filter-server-headers{}.
- *    Added parse_header_time() to share some code.
- *    Replaced timegm() with mktime().
- *
- *    Revision 1.60  2006/08/12 03:54:37  david__schmidt
- *    Windows service integration
- *
- *    Revision 1.59  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.58  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.56.2.10  2006/01/21 16:16:08  david__schmidt
- *    Thanks to  Edward Carrel for his patch to modernize OSX'spthreads support.  See bug #1409623.
- *
- *    Revision 1.56.2.9  2004/10/03 12:53:45  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.56.2.8  2003/07/11 13:21:25  oes
- *    Excluded text/plain objects from filtering. This fixes a
- *    couple of client-crashing, download corruption and
- *    Privoxy performance issues, whose root cause lies in
- *    web servers labelling content of unknown type as text/plain.
- *
- *    Revision 1.56.2.7  2003/05/06 12:07:26  oes
- *    Fixed bug #729900: Suspicious HOST: headers are now killed and regenerated if necessary
- *
- *    Revision 1.56.2.6  2003/04/14 21:28:30  oes
- *    Completing the previous change
- *
- *    Revision 1.56.2.5  2003/04/14 12:08:16  oes
- *    Added temporary workaround for bug in PHP < 4.2.3
- *
- *    Revision 1.56.2.4  2003/03/07 03:41:05  david__schmidt
- *    Wrapping all *_r functions (the non-_r versions of them) with mutex semaphores for OSX.  Hopefully this will take care of all of those pesky crash reports.
- *
- *    Revision 1.56.2.3  2002/11/10 04:20:02  hal9
- *    Fix typo: supressed -> suppressed
- *
- *    Revision 1.56.2.2  2002/09/25 14:59:53  oes
- *    Improved cookie logging
- *
- *    Revision 1.56.2.1  2002/09/25 14:52:45  oes
- *    Added basic support for OPTIONS and TRACE HTTP methods:
- *     - New parser function client_max_forwards which decrements
- *       the Max-Forwards HTTP header field of OPTIONS and TRACE
- *       requests by one before forwarding
- *     - New parser function client_host which extracts the host
- *       and port information from the HTTP header field if the
- *       request URI was not absolute
- *     - Don't crumble and re-add the Host: header, but only generate
- *       and append if missing
- *
- *    Revision 1.56  2002/05/12 15:34:22  jongfoster
- *    Fixing typo in a comment
- *
- *    Revision 1.55  2002/05/08 16:01:07  oes
- *    Optimized add_to_iob:
- *     - Use realloc instead of malloc(), memcpy(), free()
- *     - Expand to powers of two if possible, to get
- *       O(log n) reallocs instead of O(n).
- *     - Moved check for buffer limit here from chat
- *     - Report failure via returncode
- *
- *    Revision 1.54  2002/04/02 15:03:16  oes
- *    Tiny code cosmetics
- *
- *    Revision 1.53  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.52  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.51  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.50  2002/03/12 01:45:35  oes
- *    More verbose logging
- *
- *    Revision 1.49  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.48  2002/03/07 03:46:53  oes
- *    Fixed compiler warnings etc
- *
- *    Revision 1.47  2002/02/20 23:15:13  jongfoster
- *    Parsing functions now handle out-of-memory gracefully by returning
- *    an error code.
- *
- *    Revision 1.46  2002/01/17 21:03:47  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Revision 1.45  2002/01/09 14:33:03  oes
- *    Added support for localtime_r.
- *
- *    Revision 1.44  2001/12/14 01:22:54  steudten
- *    Remove 'user:pass@' from 'proto://user:pass@host' for the
- *    new added header 'Host: ..'. (See Req ID 491818)
- *
- *    Revision 1.43  2001/11/23 00:26:38  jongfoster
- *    Fixing two really stupid errors in my previous commit
- *
- *    Revision 1.42  2001/11/22 21:59:30  jongfoster
- *    Adding code to handle +no-cookies-keep
- *
- *    Revision 1.41  2001/11/05 23:43:05  steudten
- *    Add time+date to log files.
- *
- *    Revision 1.40  2001/10/26 20:13:09  jongfoster
- *    ctype.h is needed in Windows, too.
- *
- *    Revision 1.39  2001/10/26 17:40:04  oes
- *    Introduced get_header_value()
- *    Removed http->user_agent, csp->referrer and csp->accept_types
- *    Removed client_accept()
- *
- *    Revision 1.38  2001/10/25 03:40:48  david__schmidt
- *    Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- *    threads to call select() simultaneously.  So, it's time to do a real, live,
- *    native OS/2 port.  See defines for __EMX__ (the porting layer) vs. __OS2__
- *    (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- *    Revision 1.37  2001/10/23 21:36:02  jongfoster
- *    Documenting sed()'s error behaviou (doc change only)
- *
- *    Revision 1.36  2001/10/13 12:51:51  joergs
- *    Removed client_host, (was only required for the old 2.0.2-11 http://noijb.
- *    force-load), instead crumble Host: and add it (again) in client_host_adder
- *    (in case we get a HTTP/1.0 request without Host: header and forward it to
- *    a HTTP/1.1 server/proxy).
- *
- *    Revision 1.35  2001/10/09 22:39:21  jongfoster
- *    assert.h is also required under Win32, so moving out of #ifndef _WIN32
- *    block.
- *
- *    Revision 1.34  2001/10/07 18:50:55  oes
- *    Added server_content_encoding, renamed server_transfer_encoding
- *
- *    Revision 1.33  2001/10/07 18:04:49  oes
- *    Changed server_http11 to server_http and its pattern to "HTTP".
- *      Additional functionality: it now saves the HTTP status into
- *      csp->http->status and sets CT_TABOO for Status 206 (partial range)
- *
- *    Revision 1.32  2001/10/07 15:43:28  oes
- *    Removed FEATURE_DENY_GZIP and replaced it with client_accept_encoding,
- *       client_te and client_accept_encoding_adder, triggered by the new
- *       +no-compression action. For HTTP/1.1 the Accept-Encoding header is
- *       changed to allow only identity and chunked, and the TE header is
- *       crunched. For HTTP/1.0, Accept-Encoding is crunched.
- *
- *    parse_http_request no longer does anything than parsing. The rewriting
- *      of http->cmd and version mangling are gone. It now also recognizes
- *      the put and delete methods and saves the url in http->url. Removed
- *      unused variable.
- *
- *    renamed content_type and content_length to have the server_ prefix
- *
- *    server_content_type now only works if csp->content_type != CT_TABOO
- *
- *    added server_transfer_encoding, which
- *      - Sets CT_TABOO to prohibit filtering if encoding compresses
- *      - Raises the CSP_FLAG_CHUNKED flag if Encoding is "chunked"
- *      - Change from "chunked" to "identity" if body was chunked
- *        but has been de-chunked for filtering.
- *
- *    added server_content_md5 which crunches any Content-MD5 headers
- *      if the body was modified.
- *
- *    made server_http11 conditional on +downgrade action
- *
- *    Replaced 6 boolean members of csp with one bitmap (csp->flags)
- *
- *    Revision 1.31  2001/10/05 14:25:02  oes
- *    Crumble Keep-Alive from Server
- *
- *    Revision 1.30  2001/09/29 12:56:03  joergs
- *    IJB now changes HTTP/1.1 to HTTP/1.0 in requests and answers.
- *
- *    Revision 1.29  2001/09/24 21:09:24  jongfoster
- *    Fixing 2 memory leaks that Guy spotted, where the paramater to
- *    enlist() was not being free()d.
- *
- *    Revision 1.28  2001/09/22 16:32:28  jongfoster
- *    Removing unused #includes.
- *
- *    Revision 1.27  2001/09/20 15:45:25  steudten
- *
- *    add casting from size_t to int for printf()
- *    remove local variable shadow s2
- *
- *    Revision 1.26  2001/09/16 17:05:14  jongfoster
- *    Removing unused #include showarg.h
- *
- *    Revision 1.25  2001/09/16 13:21:27  jongfoster
- *    Changes to use new list functions.
- *
- *    Revision 1.24  2001/09/13 23:05:50  jongfoster
- *    Changing the string paramater to the header parsers a "const".
- *
- *    Revision 1.23  2001/09/12 18:08:19  steudten
- *
- *    In parse_http_request() header rewriting miss the host value, so
- *    from http://www.mydomain.com the result was just " / " not
- *    http://www.mydomain.com/ in case we forward.
- *
- *    Revision 1.22  2001/09/10 10:58:53  oes
- *    Silenced compiler warnings
- *
- *    Revision 1.21  2001/07/31 14:46:00  oes
- *     - Persistant connections now suppressed
- *     - sed() no longer appends empty header to csp->headers
- *
- *    Revision 1.20  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.19  2001/07/25 17:21:54  oes
- *    client_uagent now saves copy of User-Agent: header value
- *
- *    Revision 1.18  2001/07/13 14:02:46  oes
- *     - Included fix to repair broken HTTP requests that
- *       don't contain a path, not even '/'.
- *     - Removed all #ifdef PCRS
- *     - content_type now always inspected and classified as
- *       text, gif or other.
- *     - formatting / comments
- *
- *    Revision 1.17  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.16  2001/06/29 13:32:42  oes
- *    - Fixed a comment
- *    - Adapted free_http_request
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.15  2001/06/03 19:12:38  oes
- *    deleted const struct interceptors
- *
- *    Revision 1.14  2001/06/01 18:49:17  jongfoster
- *    Replaced "list_share" with "list" - the tiny memory gain was not
- *    worth the extra complexity.
- *
- *    Revision 1.13  2001/05/31 21:30:33  jongfoster
- *    Removed list code - it's now in list.[ch]
- *    Renamed "permission" to "action", and changed many features
- *    to use the actions file rather than the global config.
- *
- *    Revision 1.12  2001/05/31 17:33:13  oes
- *
- *    CRLF -> LF
- *
- *    Revision 1.11  2001/05/29 20:11:19  joergs
- *    '/ * inside comment' warning removed.
- *
- *    Revision 1.10  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.9  2001/05/28 17:26:33  jongfoster
- *    Fixing segfault if last header was crunched.
- *    Fixing Windows build (snprintf() is _snprintf() under Win32, but we
- *    can use the cross-platform sprintf() instead.)
- *
- *    Revision 1.8  2001/05/27 22:17:04  oes
- *
- *    - re_process_buffer no longer writes the modified buffer
- *      to the client, which was very ugly. It now returns the
- *      buffer, which it is then written by chat.
- *
- *    - content_length now adjusts the Content-Length: header
- *      for modified documents rather than crunch()ing it.
- *      (Length info in csp->content_length, which is 0 for
- *      unmodified documents)
- *
- *    - For this to work, sed() is called twice when filtering.
- *
- *    Revision 1.7  2001/05/27 13:19:06  oes
- *    Patched Joergs solution for the content-length in.
- *
- *    Revision 1.6  2001/05/26 13:39:32  jongfoster
- *    Only crunches Content-Length header if applying RE filtering.
- *    Without this fix, Microsoft Windows Update wouldn't work.
- *
- *    Revision 1.5  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.4  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.3  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.2  2001/05/17 23:02:36  oes
- *     - Made referrer option accept 'L' as a substitute for '§'
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:01  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#ifndef _WIN32
-#include <stdio.h>
-#include <sys/types.h>
-#endif
-
-#include <stdlib.h>
-#include <ctype.h>
-#include <assert.h>
-#include <string.h>
-
-#ifdef __GLIBC__
-/*
- * Convince GNU's libc to provide a strptime prototype.
- */
-#define __USE_XOPEN
-#endif /*__GLIBC__ */
-#include <time.h>
-
-#ifdef FEATURE_ZLIB
-#include <zlib.h>
-#endif
-
-#if !defined(_WIN32) && !defined(__OS2__)
-#include <unistd.h>
-#endif
-
-#include "project.h"
-
-#ifdef FEATURE_PTHREAD
-#include "jcc.h"
-/* jcc.h is for mutex semapores only */
-#endif /* def FEATURE_PTHREAD */
-#include "list.h"
-#include "parsers.h"
-#include "ssplit.h"
-#include "errlog.h"
-#include "jbsockets.h"
-#include "miscutil.h"
-#include "list.h"
-#include "actions.h"
-#include "filters.h"
-
-#ifndef HAVE_STRPTIME
-#include "strptime.h"
-#endif
-
-const char parsers_h_rcs[] = PARSERS_H_VERSION;
-
-/* Fix a problem with Solaris.  There should be no effect on other
- * platforms.
- * Solaris's isspace() is a macro which uses its argument directly
- * as an array index.  Therefore we need to make sure that high-bit
- * characters generate +ve values, and ideally we also want to make
- * the argument match the declared parameter type of "int".
- *
- * Why did they write a character function that can't take a simple
- * "char" argument?  Doh!
- */
-#define ijb_isupper(__X) isupper((int)(unsigned char)(__X))
-#define ijb_tolower(__X) tolower((int)(unsigned char)(__X))
-
-static char *get_header_line(struct iob *iob);
-static jb_err scan_headers(struct client_state *csp);
-static jb_err header_tagger(struct client_state *csp, char *header);
-static jb_err parse_header_time(const char *header_time, time_t *result);
-
-static jb_err crumble                   (struct client_state *csp, char **header);
-static jb_err filter_header             (struct client_state *csp, char **header);
-static jb_err client_connection         (struct client_state *csp, char **header);
-static jb_err client_referrer           (struct client_state *csp, char **header);
-static jb_err client_uagent             (struct client_state *csp, char **header);
-static jb_err client_ua                 (struct client_state *csp, char **header);
-static jb_err client_from               (struct client_state *csp, char **header);
-static jb_err client_send_cookie        (struct client_state *csp, char **header);
-static jb_err client_x_forwarded        (struct client_state *csp, char **header);
-static jb_err client_accept_encoding    (struct client_state *csp, char **header);
-static jb_err client_te                 (struct client_state *csp, char **header);
-static jb_err client_max_forwards       (struct client_state *csp, char **header);
-static jb_err client_host               (struct client_state *csp, char **header);
-static jb_err client_if_modified_since  (struct client_state *csp, char **header);
-static jb_err client_accept_language    (struct client_state *csp, char **header);
-static jb_err client_if_none_match      (struct client_state *csp, char **header);
-static jb_err crunch_client_header      (struct client_state *csp, char **header);
-static jb_err client_x_filter           (struct client_state *csp, char **header);
-static jb_err client_range              (struct client_state *csp, char **header);
-static jb_err server_set_cookie         (struct client_state *csp, char **header);
-static jb_err server_connection         (struct client_state *csp, char **header);
-static jb_err server_content_type       (struct client_state *csp, char **header);
-static jb_err server_adjust_content_length(struct client_state *csp, char **header);
-static jb_err server_content_md5        (struct client_state *csp, char **header);
-static jb_err server_content_encoding   (struct client_state *csp, char **header);
-static jb_err server_transfer_coding    (struct client_state *csp, char **header);
-static jb_err server_http               (struct client_state *csp, char **header);
-static jb_err crunch_server_header      (struct client_state *csp, char **header);
-static jb_err server_last_modified      (struct client_state *csp, char **header);
-static jb_err server_content_disposition(struct client_state *csp, char **header);
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-static jb_err server_save_content_length(struct client_state *csp, char **header);
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-static jb_err client_host_adder       (struct client_state *csp);
-static jb_err client_xtra_adder       (struct client_state *csp);
-static jb_err client_x_forwarded_for_adder(struct client_state *csp);
-static jb_err client_connection_header_adder(struct client_state *csp);
-static jb_err server_connection_close_adder(struct client_state *csp);
-
-static jb_err create_forged_referrer(char **header, const char *hostport);
-static jb_err create_fake_referrer(char **header, const char *fake_referrer);
-static jb_err handle_conditional_hide_referrer_parameter(char **header,
-   const char *host, const int parameter_conditional_block);
-static const char *get_appropiate_connection_header(const struct client_state *csp);
-
-/*
- * List of functions to run on a list of headers.
- */
-struct parsers
-{
-   /** The header prefix to match */
-   const char *str;
-   
-   /** The length of the prefix to match */
-   const size_t len;
-   
-   /** The function to apply to this line */
-   const parser_func_ptr parser;
-};
-
-static const struct parsers client_patterns[] = {
-   { "referer:",                  8,   client_referrer },
-   { "user-agent:",              11,   client_uagent },
-   { "ua-",                       3,   client_ua },
-   { "from:",                     5,   client_from },
-   { "cookie:",                   7,   client_send_cookie },
-   { "x-forwarded-for:",         16,   client_x_forwarded },
-   { "Accept-Encoding:",         16,   client_accept_encoding },
-   { "TE:",                       3,   client_te },
-   { "Host:",                     5,   client_host },
-   { "if-modified-since:",       18,   client_if_modified_since },
-   { "Keep-Alive:",              11,   crumble },
-   { "connection:",              11,   client_connection },
-   { "proxy-connection:",        17,   crumble },
-   { "max-forwards:",            13,   client_max_forwards },
-   { "Accept-Language:",         16,   client_accept_language },
-   { "if-none-match:",           14,   client_if_none_match },
-   { "Range:",                    6,   client_range },
-   { "Request-Range:",           14,   client_range },
-   { "If-Range:",                 9,   client_range },
-   { "X-Filter:",                 9,   client_x_filter },
-   { "*",                         0,   crunch_client_header },
-   { "*",                         0,   filter_header },
-   { NULL,                        0,   NULL }
-};
-
-static const struct parsers server_patterns[] = {
-   { "HTTP/",                     5, server_http },
-   { "set-cookie:",              11, server_set_cookie },
-   { "connection:",              11, server_connection },
-   { "Content-Type:",            13, server_content_type },
-   { "Content-MD5:",             12, server_content_md5 },
-   { "Content-Encoding:",        17, server_content_encoding },
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   { "Content-Length:",          15, server_save_content_length },
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-   { "Transfer-Encoding:",       18, server_transfer_coding },
-   { "Keep-Alive:",              11, crumble },
-   { "content-disposition:",     20, server_content_disposition },
-   { "Last-Modified:",           14, server_last_modified },
-   { "*",                         0, crunch_server_header },
-   { "*",                         0, filter_header },
-   { NULL,                        0, NULL }
-};
-
-static const add_header_func_ptr add_client_headers[] = {
-   client_host_adder,
-   client_x_forwarded_for_adder,
-   client_xtra_adder,
-   /* Temporarily disabled:    client_accept_encoding_adder, */
-   client_connection_header_adder,
-   NULL
-};
-
-static const add_header_func_ptr add_server_headers[] = {
-   server_connection_close_adder,
-   NULL
-};
-
-/*********************************************************************
- *
- * Function    :  flush_socket
- *
- * Description :  Write any pending "buffered" content.
- *
- * Parameters  :
- *          1  :  fd = file descriptor of the socket to read
- *          2  :  iob = The I/O buffer to flush, usually csp->iob.
- *
- * Returns     :  On success, the number of bytes written are returned (zero
- *                indicates nothing was written).  On error, -1 is returned,
- *                and errno is set appropriately.  If count is zero and the
- *                file descriptor refers to a regular file, 0 will be
- *                returned without causing any other effect.  For a special
- *                file, the results are not portable.
- *
- *********************************************************************/
-long flush_socket(jb_socket fd, struct iob *iob)
-{
-   long len = iob->eod - iob->cur;
-
-   if (len <= 0)
-   {
-      return(0);
-   }
-
-   if (write_socket(fd, iob->cur, (size_t)len))
-   {
-      return(-1);
-   }
-   iob->eod = iob->cur = iob->buf;
-   return(len);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  add_to_iob
- *
- * Description :  Add content to the buffered page, expanding the
- *                buffer if necessary.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  buf = holds the content to be added to the page
- *          3  :  n = number of bytes to be added
- *
- * Returns     :  JB_ERR_OK on success, JB_ERR_MEMORY if out-of-memory
- *                or buffer limit reached.
- *
- *********************************************************************/
-jb_err add_to_iob(struct client_state *csp, char *buf, long n)
-{
-   struct iob *iob = csp->iob;
-   size_t used, offset, need, want;
-   char *p;
-
-   if (n <= 0) return JB_ERR_OK;
-
-   used   = (size_t)(iob->eod - iob->buf);
-   offset = (size_t)(iob->cur - iob->buf);
-   need   = used + (size_t)n + 1;
-
-   /*
-    * If the buffer can't hold the new data, extend it first.
-    * Use the next power of two if possible, else use the actual need.
-    */
-   if (need > csp->config->buffer_limit)
-   {
-      log_error(LOG_LEVEL_INFO,
-         "Buffer limit reached while extending the buffer (iob). Needed: %d. Limit: %d",
-         need, csp->config->buffer_limit);
-      return JB_ERR_MEMORY;
-   }
-
-   if (need > iob->size)
-   {
-      for (want = csp->iob->size ? csp->iob->size : 512; want <= need;) want *= 2;
-      
-      if (want <= csp->config->buffer_limit && NULL != (p = (char *)realloc(iob->buf, want)))
-      {
-         iob->size = want;
-      }
-      else if (NULL != (p = (char *)realloc(iob->buf, need)))
-      {
-         iob->size = need;
-      }
-      else
-      {
-         log_error(LOG_LEVEL_ERROR, "Extending the buffer (iob) failed: %E");
-         return JB_ERR_MEMORY;
-      }
-
-      /* Update the iob pointers */
-      iob->cur = p + offset;
-      iob->eod = p + used;
-      iob->buf = p;
-   }
-
-   /* copy the new data into the iob buffer */
-   memcpy(iob->eod, buf, (size_t)n);
-
-   /* point to the end of the data */
-   iob->eod += n;
-
-   /* null terminate == cheap insurance */
-   *iob->eod = '\0';
-
-   return JB_ERR_OK;
-
-}
-
-
-#ifdef FEATURE_ZLIB
-/*********************************************************************
- *
- * Function    :  decompress_iob
- *
- * Description :  Decompress buffered page, expanding the
- *                buffer as necessary.  csp->iob->cur
- *                should point to the the beginning of the
- *                compressed data block.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success,
- *                JB_ERR_MEMORY if out-of-memory limit reached, and
- *                JB_ERR_COMPRESS if error decompressing buffer.
- *
- *********************************************************************/
-jb_err decompress_iob(struct client_state *csp)
-{
-   char  *buf;       /* new, uncompressed buffer */
-   char  *cur;       /* Current iob position (to keep the original 
-                      * iob->cur unmodified if we return early) */
-   size_t bufsize;   /* allocated size of the new buffer */
-   size_t old_size;  /* Content size before decompression */
-   size_t skip_size; /* Number of bytes at the beginning of the iob
-                        that we should NOT decompress. */
-   int status;       /* return status of the inflate() call */
-   z_stream zstr;    /* used by calls to zlib */
-
-   assert(csp->iob->cur - csp->iob->buf > 0);
-   assert(csp->iob->eod - csp->iob->cur > 0);
-
-   bufsize = csp->iob->size;
-   skip_size = (size_t)(csp->iob->cur - csp->iob->buf);
-   old_size = (size_t)(csp->iob->eod - csp->iob->cur);
-
-   cur = csp->iob->cur;
-
-   if (bufsize < (size_t)10)
-   {
-      /*
-       * This is to protect the parsing of gzipped data,
-       * but it should(?) be valid for deflated data also.
-       */
-      log_error(LOG_LEVEL_ERROR, "Buffer too small decompressing iob");
-      return JB_ERR_COMPRESS;
-   }
-
-   if (csp->content_type & CT_GZIP)
-   {
-      /*
-       * Our task is slightly complicated by the facts that data
-       * compressed by gzip does not include a zlib header, and
-       * that there is no easily accessible interface in zlib to
-       * handle a gzip header. We strip off the gzip header by
-       * hand, and later inform zlib not to expect a header.
-       */
-
-      /*
-       * Strip off the gzip header. Please see RFC 1952 for more
-       * explanation of the appropriate fields.
-       */
-      if ((*cur++ != (char)0x1f)
-       || (*cur++ != (char)0x8b)
-       || (*cur++ != Z_DEFLATED))
-      {
-         log_error(LOG_LEVEL_ERROR, "Invalid gzip header when decompressing");
-         return JB_ERR_COMPRESS;
-      }
-      else
-      {
-         int flags = *cur++;
-         /*
-          * XXX: These magic numbers should be replaced
-          * with macros to give a better idea what they do.
-          */
-         if (flags & 0xe0)
-         {
-            /* The gzip header has reserved bits set; bail out. */
-            log_error(LOG_LEVEL_ERROR, "Invalid gzip header flags when decompressing");
-            return JB_ERR_COMPRESS;
-         }
-         cur += 6;
-
-         /* Skip extra fields if necessary. */
-         if (flags & 0x04)
-         {
-            /*
-             * Skip a given number of bytes, specified
-             * as a 16-bit little-endian value.
-             */
-            /*
-             * XXX: This code used to be:
-             * 
-             * csp->iob->cur += *csp->iob->cur++ + (*csp->iob->cur++ << 8);
-             *
-             * which I had to change into:
-             *
-             * cur += *cur++ + (*cur++ << 8);
-             *
-             * at which point gcc43 finally noticed that the value
-             * of cur is undefined (it depends on which of the
-             * summands is evaluated first).
-             *
-             * I haven't come across a site where this
-             * code is actually executed yet, but I hope
-             * it works anyway.
-             */
-            int skip_bytes;
-            skip_bytes = *cur++;
-            skip_bytes = *cur++ << 8;
-
-            assert(skip_bytes == *csp->iob->cur - 2 + ((*csp->iob->cur - 1) << 8));
-
-            /*
-             * The number of bytes to skip should be positive
-             * and we'd like to stay in the buffer.
-             */
-            if ((skip_bytes < 0) || (skip_bytes >= (csp->iob->eod - cur)))
-            {
-               log_error(LOG_LEVEL_ERROR,
-                  "Unreasonable amount of bytes to skip (%d). Stopping decompression",
-                  skip_bytes);
-               return JB_ERR_COMPRESS;
-            }
-            log_error(LOG_LEVEL_INFO,
-               "Skipping %d bytes for gzip compression. Does this sound right?",
-               skip_bytes);
-            cur += skip_bytes;
-         }
-
-         /* Skip the filename if necessary. */
-         if (flags & 0x08)
-         {
-            /* A null-terminated string is supposed to follow. */
-            while (*cur++ && (cur < csp->iob->eod));
-
-         }
-
-         /* Skip the comment if necessary. */
-         if (flags & 0x10)
-         {
-            /* A null-terminated string is supposed to follow. */
-            while (*cur++ && (cur < csp->iob->eod));
-         }
-
-         /* Skip the CRC if necessary. */
-         if (flags & 0x02)
-         {
-            cur += 2;
-         }
-
-         if (cur >= csp->iob->eod)
-         {
-            /*
-             * If the current position pointer reached or passed
-             * the buffer end, we were obviously tricked to skip
-             * too much.
-             */
-            log_error(LOG_LEVEL_ERROR,
-               "Malformed gzip header detected. Aborting decompression.");
-            return JB_ERR_COMPRESS;
-         }
-      }
-   }
-   else if (csp->content_type & CT_DEFLATE)
-   {
-      /*
-       * XXX: The debug level should be lowered
-       * before the next stable release.
-       */
-      log_error(LOG_LEVEL_INFO, "Decompressing deflated iob: %d", *cur);
-      /*
-       * In theory (that is, according to RFC 1950), deflate-compressed
-       * data should begin with a two-byte zlib header and have an
-       * adler32 checksum at the end. It seems that in practice only
-       * the raw compressed data is sent. Note that this means that
-       * we are not RFC 1950-compliant here, but the advantage is that
-       * this actually works. :)
-       *
-       * We add a dummy null byte to tell zlib where the data ends,
-       * and later inform it not to expect a header.
-       *
-       * Fortunately, add_to_iob() has thoughtfully null-terminated
-       * the buffer; we can just increment the end pointer to include
-       * the dummy byte.  
-       */
-      csp->iob->eod++;
-   }
-   else
-   {
-      log_error(LOG_LEVEL_ERROR,
-         "Unable to determine compression format for decompression");
-      return JB_ERR_COMPRESS;
-   }
-
-   /* Set up the fields required by zlib. */
-   zstr.next_in  = (Bytef *)cur;
-   zstr.avail_in = (unsigned int)(csp->iob->eod - cur);
-   zstr.zalloc   = Z_NULL;
-   zstr.zfree    = Z_NULL;
-   zstr.opaque   = Z_NULL;
-
-   /*
-    * Passing -MAX_WBITS to inflateInit2 tells the library
-    * that there is no zlib header.
-    */
-   if (inflateInit2 (&zstr, -MAX_WBITS) != Z_OK)
-   {
-      log_error(LOG_LEVEL_ERROR, "Error initializing decompression");
-      return JB_ERR_COMPRESS;
-   }
-
-   /*
-    * Next, we allocate new storage for the inflated data.
-    * We don't modify the existing iob yet, so in case there
-    * is error in decompression we can recover gracefully.
-    */
-   buf = zalloc(bufsize);
-   if (NULL == buf)
-   {
-      log_error(LOG_LEVEL_ERROR, "Out of memory decompressing iob");
-      return JB_ERR_MEMORY;
-   }
-
-   assert(bufsize >= skip_size);
-   memcpy(buf, csp->iob->buf, skip_size);
-   zstr.avail_out = bufsize - skip_size;
-   zstr.next_out  = (Bytef *)buf + skip_size;
-
-   /* Try to decompress the whole stream in one shot. */
-   while (Z_BUF_ERROR == (status = inflate(&zstr, Z_FINISH)))
-   {
-      /* We need to allocate more memory for the output buffer. */
-
-      char *tmpbuf;                /* used for realloc'ing the buffer */
-      size_t oldbufsize = bufsize; /* keep track of the old bufsize */
-
-      /*
-       * If zlib wants more data then there's a problem, because
-       * the complete compressed file should have been buffered.
-       */
-      if (0 == zstr.avail_in)
-      {
-         log_error(LOG_LEVEL_ERROR, "Unexpected end of compressed iob");
-         return JB_ERR_COMPRESS;
-      }
-
-      /*
-       * If we tried the limit and still didn't have enough
-       * memory, just give up.
-       */
-      if (bufsize == csp->config->buffer_limit)
-      {
-         log_error(LOG_LEVEL_ERROR, "Buffer limit reached while decompressing iob");
-         return JB_ERR_MEMORY;
-      }
-
-      /* Try doubling the buffer size each time. */
-      bufsize *= 2;
-
-      /* Don't exceed the buffer limit. */
-      if (bufsize > csp->config->buffer_limit)
-      {
-         bufsize = csp->config->buffer_limit;
-      }
-    
-      /* Try to allocate the new buffer. */
-      tmpbuf = realloc(buf, bufsize);
-      if (NULL == tmpbuf)
-      {
-         log_error(LOG_LEVEL_ERROR, "Out of memory decompressing iob");
-         freez(buf);
-         return JB_ERR_MEMORY;
-      }
-      else
-      {
-         char *oldnext_out = (char *)zstr.next_out;
-
-         /*
-          * Update the fields for inflate() to use the new
-          * buffer, which may be in a location different from
-          * the old one.
-          */
-         zstr.avail_out += bufsize - oldbufsize;
-         zstr.next_out   = (Bytef *)tmpbuf + bufsize - zstr.avail_out;
-
-         /*
-          * Compare with an uglier method of calculating these values
-          * that doesn't require the extra oldbufsize variable.
-          */
-         assert(zstr.avail_out == tmpbuf + bufsize - (char *)zstr.next_out);
-         assert((char *)zstr.next_out == tmpbuf + ((char *)oldnext_out - buf));
-         assert(zstr.avail_out > 0U);
-
-         buf = tmpbuf;
-      }
-   }
-
-   if (Z_STREAM_ERROR == inflateEnd(&zstr))
-   {
-      log_error(LOG_LEVEL_ERROR,
-         "Inconsistent stream state after decompression: %s", zstr.msg);
-      /*
-       * XXX: Intentionally no return.
-       *
-       * According to zlib.h, Z_STREAM_ERROR is returned
-       * "if the stream state was inconsistent".
-       *
-       * I assume in this case inflate()'s status
-       * would also be something different than Z_STREAM_END
-       * so this check should be redundant, but lets see.
-       */
-   }
-
-   if (status != Z_STREAM_END)
-   {
-      /* We failed to decompress the stream. */
-      log_error(LOG_LEVEL_ERROR,
-         "Error in decompressing to the buffer (iob): %s", zstr.msg);
-      return JB_ERR_COMPRESS;
-   }
-
-   /*
-    * Finally, we can actually update the iob, since the
-    * decompression was successful. First, free the old
-    * buffer.
-    */
-   freez(csp->iob->buf);
-
-   /* Now, update the iob to use the new buffer. */
-   csp->iob->buf  = buf;
-   csp->iob->cur  = csp->iob->buf + skip_size;
-   csp->iob->eod  = (char *)zstr.next_out;
-   csp->iob->size = bufsize;
-  
-   /*
-    * Make sure the new uncompressed iob obeys some minimal
-    * consistency conditions.
-    */
-   if ((csp->iob->buf <  csp->iob->cur)
-    && (csp->iob->cur <= csp->iob->eod)
-    && (csp->iob->eod <= csp->iob->buf + csp->iob->size))
-   {
-      const size_t new_size = (size_t)(csp->iob->eod - csp->iob->cur);
-      if (new_size > (size_t)0)
-      {
-         log_error(LOG_LEVEL_RE_FILTER,
-            "Decompression successful. Old size: %d, new size: %d.",
-            old_size, new_size);
-      }
-      else
-      {
-         /* zlib thinks this is OK, so lets do the same. */
-         log_error(LOG_LEVEL_INFO, "Decompression didn't result in any content.");
-      }
-   }
-   else
-   {
-      /* It seems that zlib did something weird. */
-      log_error(LOG_LEVEL_ERROR,
-         "Unexpected error decompressing the buffer (iob): %d==%d, %d>%d, %d<%d",
-         csp->iob->cur, csp->iob->buf + skip_size, csp->iob->eod, csp->iob->buf,
-         csp->iob->eod, csp->iob->buf + csp->iob->size);
-      return JB_ERR_COMPRESS;
-   }
-
-   return JB_ERR_OK;
-
-}
-#endif /* defined(FEATURE_ZLIB) */
-
-
-/*********************************************************************
- *
- * Function    :  string_move
- *
- * Description :  memmove wrapper to move the last part of a string
- *                towards the beginning, overwriting the part in
- *                the middle. strlcpy() can't be used here as the
- *                strings overlap.
- *
- * Parameters  :
- *          1  :  dst = Destination to overwrite
- *          2  :  src = Source to move.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void string_move(char *dst, char *src)
-{
-   assert(dst < src);
-
-   /* +1 to copy the terminating nul as well. */
-   memmove(dst, src, strlen(src)+1);
-}
-
-
-/*********************************************************************
- *
- * Function    :  normalize_lws
- *
- * Description :  Reduces unquoted linear white space in headers
- *                to a single space in accordance with RFC 2616 2.2.
- *                This simplifies parsing and filtering later on.
- *
- *                XXX: Remove log messages before
- *                     the next stable release?
- *
- * Parameters  :
- *          1  :  header = A header with linear white space to reduce.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void normalize_lws(char *header)
-{
-   char *p = header;
-
-   while (*p != '\0')
-   {
-      if (ijb_isspace(*p) && ijb_isspace(*(p+1)))
-      {
-         char *q = p+1;
-
-         while (ijb_isspace(*q))
-         {
-            q++;
-         }
-         log_error(LOG_LEVEL_HEADER, "Reducing white space in '%s'", header);
-         string_move(p+1, q);
-      }
-
-      if (*p == '\t')
-      {
-         log_error(LOG_LEVEL_HEADER,
-            "Converting tab to space in '%s'", header);
-         *p = ' ';
-      }
-      else if (*p == '"')
-      {
-         char *end_of_token = strstr(p+1, "\"");
-
-         if (NULL != end_of_token)
-         {
-            /* Don't mess with quoted text. */
-            p = end_of_token;
-         }
-         else
-         {
-            log_error(LOG_LEVEL_HEADER,
-               "Ignoring single quote in '%s'", header);
-         }
-      }
-      p++;
-   }
-
-   p = strchr(header, ':');
-   if ((p != NULL) && (p != header) && ijb_isspace(*(p-1)))
-   {
-      /*
-       * There's still space before the colon.
-       * We don't want it.
-       */
-      string_move(p-1, p);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_header
- *
- * Description :  This (odd) routine will parse the csp->iob
- *                to get the next complete header.
- *
- * Parameters  :
- *          1  :  iob = The I/O buffer to parse, usually csp->iob.
- *
- * Returns     :  Any one of the following:
- *
- * 1) a pointer to a dynamically allocated string that contains a header line
- * 2) NULL  indicating that the end of the header was reached
- * 3) ""    indicating that the end of the iob was reached before finding
- *          a complete header line.
- *
- *********************************************************************/
-char *get_header(struct iob *iob)
-{
-   char *header;
-
-   header = get_header_line(iob);
-
-   if ((header == NULL) || (*header == '\0'))
-   {
-      /*
-       * No complete header read yet, tell the client.
-       */
-      return header;
-   }
-
-   while ((iob->cur[0] == ' ') || (iob->cur[0] == '\t'))
-   {
-      /*
-       * Header spans multiple lines, append the next one.
-       */
-      char *continued_header;
-      
-      continued_header = get_header_line(iob);
-      if ((continued_header == NULL) || (*continued_header == '\0'))
-      {
-         /*
-          * No complete header read yet, return what we got.
-          * XXX: Should "unread" header instead.
-          */
-         log_error(LOG_LEVEL_INFO,
-            "Failed to read a multi-line header properly: '%s'",
-            header);
-         break;
-      }
-
-      if (JB_ERR_OK != string_join(&header, continued_header))
-      {
-         log_error(LOG_LEVEL_FATAL,
-            "Out of memory while appending multiple headers.");
-      }
-      else
-      {
-         /* XXX: remove before next stable release. */
-         log_error(LOG_LEVEL_HEADER,
-            "Merged multiple header lines to: '%s'",
-            header);
-      }
-   }
-
-   normalize_lws(header);
-
-   return header;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_header_line
- *
- * Description :  This (odd) routine will parse the csp->iob
- *                to get the next header line.
- *
- * Parameters  :
- *          1  :  iob = The I/O buffer to parse, usually csp->iob.
- *
- * Returns     :  Any one of the following:
- *
- * 1) a pointer to a dynamically allocated string that contains a header line
- * 2) NULL  indicating that the end of the header was reached
- * 3) ""    indicating that the end of the iob was reached before finding
- *          a complete header line.
- *
- *********************************************************************/
-static char *get_header_line(struct iob *iob)
-{
-   char *p, *q, *ret;
-
-   if ((iob->cur == NULL)
-      || ((p = strchr(iob->cur, '\n')) == NULL))
-   {
-      return(""); /* couldn't find a complete header */
-   }
-
-   *p = '\0';
-
-   ret = strdup(iob->cur);
-   if (ret == NULL)
-   {
-      /* FIXME No way to handle error properly */
-      log_error(LOG_LEVEL_FATAL, "Out of memory in get_header_line()");
-   }
-   assert(ret != NULL);
-
-   iob->cur = p+1;
-
-   if ((q = strchr(ret, '\r')) != NULL) *q = '\0';
-
-   /* is this a blank line (i.e. the end of the header) ? */
-   if (*ret == '\0')
-   {
-      freez(ret);
-      return NULL;
-   }
-
-   return ret;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_header_value
- *
- * Description :  Get the value of a given header from a chained list
- *                of header lines or return NULL if no such header is
- *                present in the list.
- *
- * Parameters  :
- *          1  :  header_list = pointer to list
- *          2  :  header_name = string with name of header to look for.
- *                              Trailing colon required, capitalization
- *                              doesn't matter.
- *
- * Returns     :  NULL if not found, else value of header
- *
- *********************************************************************/
-char *get_header_value(const struct list *header_list, const char *header_name)
-{
-   struct list_entry *cur_entry;
-   char *ret = NULL;
-   size_t length = 0;
-
-   assert(header_list);
-   assert(header_name);
-   length = strlen(header_name);
-
-   for (cur_entry = header_list->first; cur_entry ; cur_entry = cur_entry->next)
-   {
-      if (cur_entry->str)
-      {
-         if (!strncmpic(cur_entry->str, header_name, length))
-         {
-            /*
-             * Found: return pointer to start of value
-             */
-            ret = cur_entry->str + length;
-            while (*ret && ijb_isspace(*ret)) ret++;
-            return ret;
-         }
-      }
-   }
-
-   /* 
-    * Not found
-    */
-   return NULL;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  scan_headers
- *
- * Description :  Scans headers, applies tags and updates action bits. 
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK
- *
- *********************************************************************/
-static jb_err scan_headers(struct client_state *csp)
-{
-   struct list_entry *h; /* Header */
-   jb_err err = JB_ERR_OK;
-
-   for (h = csp->headers->first; (err == JB_ERR_OK) && (h != NULL) ; h = h->next)
-   {
-      /* Header crunch()ed in previous run? -> ignore */
-      if (h->str == NULL) continue;
-      log_error(LOG_LEVEL_HEADER, "scan: %s", h->str);
-      err = header_tagger(csp, h->str);
-   }
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  sed
- *
- * Description :  add, delete or modify lines in the HTTP header streams.
- *                On entry, it receives a linked list of headers space
- *                that was allocated dynamically (both the list nodes
- *                and the header contents).
- *
- *                As a side effect it frees the space used by the original
- *                header lines.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  filter_server_headers = Boolean to switch between
- *                                        server and header filtering.
- *
- * Returns     :  JB_ERR_OK in case off success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err sed(struct client_state *csp, int filter_server_headers)
-{
-   /* XXX: use more descriptive names. */
-   struct list_entry *p;
-   const struct parsers *v;
-   const add_header_func_ptr *f;
-   jb_err err = JB_ERR_OK;
-
-   if (filter_server_headers)
-   {
-      v = server_patterns;
-      f = add_server_headers;
-   }
-   else
-   {
-      v = client_patterns;
-      f = add_client_headers;
-   }
-
-   scan_headers(csp);
-
-   while ((err == JB_ERR_OK) && (v->str != NULL))
-   {
-      for (p = csp->headers->first; (err == JB_ERR_OK) && (p != NULL); p = p->next)
-      {
-         /* Header crunch()ed in previous run? -> ignore */
-         if (p->str == NULL) continue;
-
-         /* Does the current parser handle this header? */
-         if ((strncmpic(p->str, v->str, v->len) == 0) ||
-             (v->len == CHECK_EVERY_HEADER_REMAINING))
-         {
-            err = v->parser(csp, &(p->str));
-         }
-      }
-      v++;
-   }
-
-   /* place additional headers on the csp->headers list */
-   while ((err == JB_ERR_OK) && (*f))
-   {
-      err = (*f)(csp);
-      f++;
-   }
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  update_server_headers
- *
- * Description :  Updates server headers after the body has been modified.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK in case off success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err update_server_headers(struct client_state *csp)
-{
-   jb_err err = JB_ERR_OK;
-
-   static const struct parsers server_patterns_light[] = {
-      { "Content-Length:",    15, server_adjust_content_length },
-      { "Transfer-Encoding:", 18, server_transfer_coding },
-#ifdef FEATURE_ZLIB
-      { "Content-Encoding:",  17, server_content_encoding },
-#endif /* def FEATURE_ZLIB */
-      { NULL,                  0, NULL }
-   };
-
-   if (strncmpic(csp->http->cmd, "HEAD", 4))
-   {
-      const struct parsers *v;
-      struct list_entry *p;
-
-      for (v = server_patterns_light; (err == JB_ERR_OK) && (v->str != NULL); v++)
-      {
-         for (p = csp->headers->first; (err == JB_ERR_OK) && (p != NULL); p = p->next)
-         {
-            /* Header crunch()ed in previous run? -> ignore */
-            if (p->str == NULL) continue;
-
-            /* Does the current parser handle this header? */
-            if (strncmpic(p->str, v->str, v->len) == 0)
-            {
-               err = v->parser(csp, (char **)&(p->str));
-            }
-         }
-      }
-   }
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  header_tagger
- *
- * Description :  Executes all text substitutions from applying
- *                tag actions and saves the result as tag.
- *
- *                XXX: Shares enough code with filter_header() and
- *                pcrs_filter_response() to warrant some helper functions.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = Header that is used as tagger input
- *
- * Returns     :  JB_ERR_OK on success and always succeeds
- *
- *********************************************************************/
-static jb_err header_tagger(struct client_state *csp, char *header)
-{
-   int wanted_filter_type;
-   int multi_action_index;
-   int i;
-   pcrs_job *job;
-
-   struct file_list *fl;
-   struct re_filterfile_spec *b;
-   struct list_entry *tag_name;
-
-   int found_filters = 0;
-   const size_t header_length = strlen(header);
-
-   if (csp->flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE)
-   {
-      wanted_filter_type = FT_SERVER_HEADER_TAGGER;
-      multi_action_index = ACTION_MULTI_SERVER_HEADER_TAGGER;
-   }
-   else
-   {
-      wanted_filter_type = FT_CLIENT_HEADER_TAGGER;
-      multi_action_index = ACTION_MULTI_CLIENT_HEADER_TAGGER;
-   }
-
-   /* Check if there are any filters */
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      fl = csp->rlist[i];
-      if (NULL != fl)
-      {
-         if (NULL != fl->f)
-         {
-           found_filters = 1;
-           break;
-         }
-      }
-   }
-
-   if (0 == found_filters)
-   {
-      log_error(LOG_LEVEL_ERROR, "Inconsistent configuration: "
-         "tagging enabled, but no taggers available.");
-      return JB_ERR_OK;
-   }
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      fl = csp->rlist[i];
-      if ((NULL == fl) || (NULL == fl->f))
-      {
-         /*
-          * Either there are no filter files
-          * left, or this filter file just
-          * contains no valid filters.
-          *
-          * Continue to be sure we don't miss
-          * valid filter files that are chained
-          * after empty or invalid ones.
-          */
-         continue;
-      }
-
-      /* For all filters, */
-      for (b = fl->f; b; b = b->next)
-      {
-         if (b->type != wanted_filter_type)
-         {
-            /* skip the ones we don't care about, */
-            continue;
-         }
-         /* leaving only taggers that could apply, of which we use the ones, */
-         for (tag_name = csp->action->multi[multi_action_index]->first;
-              NULL != tag_name; tag_name = tag_name->next)
-         {
-            /* that do apply, and */
-            if (strcmp(b->name, tag_name->str) == 0)
-            {
-               char *modified_tag = NULL;
-               char *tag = header;
-               size_t size = header_length;
-               pcrs_job *joblist = b->joblist;
-
-               if (b->dynamic) joblist = compile_dynamic_pcrs_job_list(csp, b);
-
-               if (NULL == joblist)
-               {
-                  log_error(LOG_LEVEL_RE_FILTER,
-                     "Tagger %s has empty joblist. Nothing to do.", b->name);
-                  continue;
-               }
-
-               /* execute their pcrs_joblist on the header. */
-               for (job = joblist; NULL != job; job = job->next)
-               {
-                  const int hits = pcrs_execute(job, tag, size, &modified_tag, &size);
-
-                  if (0 < hits)
-                  {
-                     /* Success, continue with the modified version. */
-                     if (tag != header)
-                     {
-                        freez(tag);
-                     }
-                     tag = modified_tag;
-                  }
-                  else
-                  {
-                     /* Tagger doesn't match */
-                     if (0 > hits)
-                     {
-                        /* Regex failure, log it but continue anyway. */
-                        assert(NULL != header);
-                        log_error(LOG_LEVEL_ERROR,
-                           "Problems with tagger \'%s\' and header \'%s\': %s",
-                           b->name, *header, pcrs_strerror(hits));
-                     }
-                     freez(modified_tag);
-                  }
-               }
-
-               if (b->dynamic) pcrs_free_joblist(joblist);
-
-               /* If this tagger matched */
-               if (tag != header)
-               {
-                  if (0 == size)
-                  {
-                     /*
-                      * There is to technical limitation which makes
-                      * it impossible to use empty tags, but I assume
-                      * no one would do it intentionally.
-                      */
-                     freez(tag);
-                     log_error(LOG_LEVEL_INFO,
-                        "Tagger \'%s\' created an empty tag. Ignored.",
-                        b->name);
-                     continue;
-                  }
- 
-                  if (!list_contains_item(csp->tags, tag))
-                  {
-                     if (JB_ERR_OK != enlist(csp->tags, tag))
-                     {
-                        log_error(LOG_LEVEL_ERROR,
-                           "Insufficient memory to add tag \'%s\', "
-                           "based on tagger \'%s\' and header \'%s\'",
-                           tag, b->name, *header);
-                     }
-                     else
-                     {
-                        char *action_message;
-                        /*
-                         * update the action bits right away, to make
-                         * tagging based on tags set by earlier taggers
-                         * of the same kind possible.
-                         */
-                        if (update_action_bits_for_tag(csp, tag))
-                        {
-                           action_message = "Action bits updated accordingly.";
-                        }
-                        else
-                        {
-                           action_message = "No action bits update necessary.";
-                        }
-
-                        log_error(LOG_LEVEL_HEADER,
-                           "Tagger \'%s\' added tag \'%s\'. %s",
-                           b->name, tag, action_message);
-                     }
-                  }
-                  else
-                  {
-                     /* XXX: Is this log-worthy? */
-                     log_error(LOG_LEVEL_HEADER,
-                        "Tagger \'%s\' didn't add tag \'%s\'. "
-                        "Tag already present", b->name, tag);
-                  }
-                  freez(tag);
-               } /* if the tagger matched */
-            } /* if the tagger applies */
-         } /* for every tagger that could apply */
-      } /* for all filters */
-   } /* for all filter files */
-
-   return JB_ERR_OK;
-}
-
-/* here begins the family of parser functions that reformat header lines */
-
-/*********************************************************************
- *
- * Function    :  filter_header
- *
- * Description :  Executes all text substitutions from all applying
- *                +(server|client)-header-filter actions on the header.
- *                Most of the code was copied from pcrs_filter_response,
- *                including the rather short variable names
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success and always succeeds
- *
- *********************************************************************/
-static jb_err filter_header(struct client_state *csp, char **header)
-{
-   int hits=0;
-   int matches;
-   size_t size = strlen(*header);
-
-   char *newheader = NULL;
-   pcrs_job *job;
-
-   struct file_list *fl;
-   struct re_filterfile_spec *b;
-   struct list_entry *filtername;
-
-   int i, found_filters = 0;
-   int wanted_filter_type;
-   int multi_action_index;
-
-   if (csp->flags & CSP_FLAG_NO_FILTERING)
-   {
-      return JB_ERR_OK;
-   }
-
-   if (csp->flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE)
-   {
-      wanted_filter_type = FT_SERVER_HEADER_FILTER;
-      multi_action_index = ACTION_MULTI_SERVER_HEADER_FILTER;
-   }
-   else
-   {
-      wanted_filter_type = FT_CLIENT_HEADER_FILTER;
-      multi_action_index = ACTION_MULTI_CLIENT_HEADER_FILTER;
-   }
-
-   /*
-    * Need to check the set of re_filterfiles...
-    */
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      fl = csp->rlist[i];
-      if (NULL != fl)
-      {
-         if (NULL != fl->f)
-         {
-           found_filters = 1;
-           break;
-         }
-      }
-   }
-
-   if (0 == found_filters)
-   {
-      log_error(LOG_LEVEL_ERROR, "Inconsistent configuration: "
-         "header filtering enabled, but no matching filters available.");
-      return JB_ERR_OK;
-   }
-
-   for (i = 0; i < MAX_AF_FILES; i++)
-   {
-      fl = csp->rlist[i];
-      if ((NULL == fl) || (NULL == fl->f))
-      {
-         /*
-          * Either there are no filter files
-          * left, or this filter file just
-          * contains no valid filters.
-          *
-          * Continue to be sure we don't miss
-          * valid filter files that are chained
-          * after empty or invalid ones.
-          */
-         continue;
-      }
-      /*
-       * For all applying +filter actions, look if a filter by that
-       * name exists and if yes, execute its pcrs_joblist on the
-       * buffer.
-       */
-      for (b = fl->f; b; b = b->next)
-      {
-         if (b->type != wanted_filter_type)
-         {
-            /* Skip other filter types */
-            continue;
-         }
-
-         for (filtername = csp->action->multi[multi_action_index]->first;
-              filtername ; filtername = filtername->next)
-         {
-            if (strcmp(b->name, filtername->str) == 0)
-            {
-               int current_hits = 0;
-               pcrs_job *joblist = b->joblist;
-
-               if (b->dynamic) joblist = compile_dynamic_pcrs_job_list(csp, b);
-
-               if (NULL == joblist)
-               {
-                  log_error(LOG_LEVEL_RE_FILTER, "Filter %s has empty joblist. Nothing to do.", b->name);
-                  continue;
-               }
-
-               log_error(LOG_LEVEL_RE_FILTER, "filtering \'%s\' (size %d) with \'%s\' ...",
-                         *header, size, b->name);
-
-               /* Apply all jobs from the joblist */
-               for (job = joblist; NULL != job; job = job->next)
-               {
-                  matches = pcrs_execute(job, *header, size, &newheader, &size);
-                  if ( 0 < matches )
-                  {
-                     current_hits += matches; 
-                     log_error(LOG_LEVEL_HEADER, "Transforming \"%s\" to \"%s\"", *header, newheader);
-                     freez(*header);
-                     *header = newheader;
-                  }
-                  else if ( 0 == matches )
-                  {
-                     /* Filter doesn't change header */
-                     freez(newheader);
-                  }
-                  else
-                  {
-                     /* RegEx failure */
-                     log_error(LOG_LEVEL_ERROR, "Filtering \'%s\' with \'%s\' didn't work out: %s",
-                        *header, b->name, pcrs_strerror(matches));
-                     if (newheader != NULL)
-                     {
-                        log_error(LOG_LEVEL_ERROR, "Freeing what's left: %s", newheader);
-                        freez(newheader);
-                     }
-                  }
-               }
-
-               if (b->dynamic) pcrs_free_joblist(joblist);
-
-               log_error(LOG_LEVEL_RE_FILTER, "... produced %d hits (new size %d).", current_hits, size);
-               hits += current_hits;
-            }
-         }
-      }
-   }
-
-   /*
-    * Additionally checking for hits is important because if
-    * the continue hack is triggered, server headers can
-    * arrive empty to separate multiple heads from each other.
-    */
-   if ((0 == size) && hits)
-   {
-      log_error(LOG_LEVEL_HEADER, "Removing empty header %s", *header);
-      freez(*header);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_connection
- *
- * Description :  Makes sure that the value of the Connection: header
- *                is "close" and signals server_connection_close_adder 
- *                to do nothing.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_connection(struct client_state *csp, char **header)
-{
-   char *old_header = *header;
-
-   /* Do we have a 'Connection: close' header? */
-   if (strcmpic(*header, "Connection: close"))
-   {
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-      if ((csp->config->feature_flags &
-           RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
-         && !strcmpic(*header, "Connection: keep-alive"))
-      {
-         /* Remember to keep the connection alive. */
-         csp->flags |= CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE;
-      }
-#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
-
-      *header = strdup("Connection: close");
-      if (header == NULL)
-      { 
-         return JB_ERR_MEMORY;
-      }
-      log_error(LOG_LEVEL_HEADER, "Replaced: \'%s\' with \'%s\'", old_header, *header);
-      freez(old_header);
-   }
-
-   /* Signal server_connection_close_adder() to return early. */
-   csp->flags |= CSP_FLAG_SERVER_CONNECTION_CLOSE_SET;
-
-   return JB_ERR_OK;
-}
-
-/*********************************************************************
- *
- * Function    :  client_connection
- *
- * Description :  Makes sure a proper "Connection:" header is
- *                set and signals connection_header_adder 
- *                to do nothing.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_connection(struct client_state *csp, char **header)
-{
-   char *old_header = *header;
-   const char *wanted_header = get_appropiate_connection_header(csp);
-
-   if (strcmpic(*header, wanted_header))
-   {
-      *header = strdup(wanted_header);
-      if (header == NULL)
-      { 
-         return JB_ERR_MEMORY;
-      }
-      log_error(LOG_LEVEL_HEADER,
-         "Replaced: \'%s\' with \'%s\'", old_header, *header);
-      freez(old_header);
-   }
-
-   /* Signal client_connection_close_adder() to return early. */
-   csp->flags |= CSP_FLAG_CLIENT_CONNECTION_HEADER_SET;
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  crumble
- *
- * Description :  This is called if a header matches a pattern to "crunch"
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err crumble(struct client_state *csp, char **header)
-{
-   (void)csp;
-   log_error(LOG_LEVEL_HEADER, "crumble crunched: %s!", *header);
-   freez(*header);
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  crunch_server_header
- *
- * Description :  Crunch server header if it matches a string supplied by the
- *                user. Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success and always succeeds
- *
- *********************************************************************/
-static jb_err crunch_server_header(struct client_state *csp, char **header)
-{
-   const char *crunch_pattern;
-
-   /* Do we feel like crunching? */
-   if ((csp->action->flags & ACTION_CRUNCH_SERVER_HEADER))
-   {
-      crunch_pattern = csp->action->string[ACTION_STRING_SERVER_HEADER];
-
-      /* Is the current header the lucky one? */
-      if (strstr(*header, crunch_pattern))
-      {
-         log_error(LOG_LEVEL_HEADER, "Crunching server header: %s (contains: %s)", *header, crunch_pattern);  
-         freez(*header);
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_content_type
- *
- * Description :  Set the content-type for filterable types (text/.*,
- *                .*xml.*, javascript and image/gif) unless filtering has been
- *                forbidden (CT_TABOO) while parsing earlier headers.
- *                NOTE: Since text/plain is commonly used by web servers
- *                      for files whose correct type is unknown, we don't
- *                      set CT_TEXT for it.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_content_type(struct client_state *csp, char **header)
-{
-   /* Remove header if it isn't the first Content-Type header */
-   if ((csp->content_type & CT_DECLARED))
-   {
-     /*
-      * Another, slightly slower, way to see if
-      * we already parsed another Content-Type header.
-      */
-      assert(NULL != get_header_value(csp->headers, "Content-Type:"));
-
-      log_error(LOG_LEVEL_ERROR,
-         "Multiple Content-Type headers. Removing and ignoring: \'%s\'",
-         *header);
-      freez(*header);
-
-      return JB_ERR_OK;
-   }
-
-   /*
-    * Signal that the Content-Type has been set.
-    */
-   csp->content_type |= CT_DECLARED;
-
-   if (!(csp->content_type & CT_TABOO))
-   {
-      /*
-       * XXX: The assumption that text/plain is a sign of
-       * binary data seems to be somewhat unreasonable nowadays
-       * and should be dropped after 3.0.8 is out.
-       */
-      if ((strstr(*header, "text/") && !strstr(*header, "plain"))
-        || strstr(*header, "xml")
-        || strstr(*header, "application/x-javascript"))
-      {
-         csp->content_type |= CT_TEXT;
-      }
-      else if (strstr(*header, "image/gif"))
-      {
-         csp->content_type |= CT_GIF;
-      }
-   }
-
-   /*
-    * Are we messing with the content type?
-    */
-   if (csp->action->flags & ACTION_CONTENT_TYPE_OVERWRITE)
-   {
-      /*
-       * Make sure the user doesn't accidently
-       * change the content type of binary documents. 
-       */
-      if ((csp->content_type & CT_TEXT) || (csp->action->flags & ACTION_FORCE_TEXT_MODE))
-      {
-         freez(*header);
-         *header = strdup("Content-Type: ");
-         string_append(header, csp->action->string[ACTION_STRING_CONTENT_TYPE]);
-
-         if (header == NULL)
-         {
-            log_error(LOG_LEVEL_HEADER, "Insufficient memory to replace Content-Type!");
-            return JB_ERR_MEMORY;
-         }
-         log_error(LOG_LEVEL_HEADER, "Modified: %s!", *header);
-      }
-      else
-      {
-         log_error(LOG_LEVEL_HEADER, "%s not replaced. "
-            "It doesn't look like a content type that should be filtered. "
-            "Enable force-text-mode if you know what you're doing.", *header);
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_transfer_coding
- *
- * Description :  - Prohibit filtering (CT_TABOO) if transfer coding compresses
- *                - Raise the CSP_FLAG_CHUNKED flag if coding is "chunked"
- *                - Remove header if body was chunked but has been
- *                  de-chunked for filtering.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_transfer_coding(struct client_state *csp, char **header)
-{
-   /*
-    * Turn off pcrs and gif filtering if body compressed
-    */
-   if (strstr(*header, "gzip") || strstr(*header, "compress") || strstr(*header, "deflate"))
-   {
-#ifdef FEATURE_ZLIB
-      /*
-       * XXX: Added to test if we could use CT_GZIP and CT_DEFLATE here.
-       */
-      log_error(LOG_LEVEL_INFO, "Marking content type for %s as CT_TABOO because of %s.",
-         csp->http->cmd, *header);
-#endif /* def FEATURE_ZLIB */
-      csp->content_type = CT_TABOO;
-   }
-
-   /*
-    * Raise flag if body chunked
-    */
-   if (strstr(*header, "chunked"))
-   {
-      csp->flags |= CSP_FLAG_CHUNKED;
-
-      /*
-       * If the body was modified, it has been de-chunked first
-       * and the header must be removed.
-       *
-       * FIXME: If there is more than one transfer encoding,
-       * only the "chunked" part should be removed here.
-       */
-      if (csp->flags & CSP_FLAG_MODIFIED)
-      {
-         log_error(LOG_LEVEL_HEADER, "Removing: %s", *header);
-         freez(*header);
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_content_encoding
- *
- * Description :  This function is run twice for each request,
- *                unless FEATURE_ZLIB and filtering are disabled.
- *
- *                The first run is used to check if the content
- *                is compressed, if FEATURE_ZLIB is disabled
- *                filtering is then disabled as well, if FEATURE_ZLIB
- *                is enabled the content is marked for decompression.
- *                
- *                The second run is used to remove the Content-Encoding
- *                header if the decompression was successful.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_content_encoding(struct client_state *csp, char **header)
-{
-#ifdef FEATURE_ZLIB
-   if ((csp->flags & CSP_FLAG_MODIFIED)
-    && (csp->content_type & (CT_GZIP | CT_DEFLATE)))
-   {
-      /*
-       * We successfully decompressed the content,
-       * and have to clean the header now, so the
-       * client no longer expects compressed data..
-       *
-       * XXX: There is a difference between cleaning
-       * and removing it completely.
-       */
-      log_error(LOG_LEVEL_HEADER, "Crunching: %s", *header);
-      freez(*header);
-   }
-   else if (strstr(*header, "gzip"))
-   {
-      /* Mark for gzip decompression */
-      csp->content_type |= CT_GZIP;
-   }
-   else if (strstr(*header, "deflate"))
-   {
-      /* Mark for zlib decompression */
-      csp->content_type |= CT_DEFLATE;
-   }
-   else if (strstr(*header, "compress"))
-   {
-      /*
-       * We can't decompress this; therefore we can't filter
-       * it either.
-       */
-      csp->content_type |= CT_TABOO;
-   }
-#else /* !defined(FEATURE_ZLIB) */
-   if (strstr(*header, "gzip") || strstr(*header, "compress") || strstr(*header, "deflate"))
-   {
-      /*
-       * Body is compressed, turn off pcrs and gif filtering.
-       */
-      csp->content_type |= CT_TABOO;
-
-      /*
-       * Log a warning if the user expects the content to be filtered.
-       */
-      if ((csp->rlist != NULL) &&
-         (!list_is_empty(csp->action->multi[ACTION_MULTI_FILTER])))
-      {
-         log_error(LOG_LEVEL_INFO,
-            "Compressed content detected, content filtering disabled. "
-            "Consider recompiling Privoxy with zlib support or "
-            "enable the prevent-compression action.");
-      }
-   }
-#endif /* defined(FEATURE_ZLIB) */
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_adjust_content_length
- *
- * Description :  Adjust Content-Length header if we modified
- *                the body.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_adjust_content_length(struct client_state *csp, char **header)
-{
-   const size_t max_header_length = 80;
-
-   /* Regenerate header if the content was modified. */
-   if (csp->flags & CSP_FLAG_MODIFIED)
-   {
-      freez(*header);
-      *header = (char *) zalloc(max_header_length);
-      if (*header == NULL)
-      {
-         return JB_ERR_MEMORY;
-      }
-
-      snprintf(*header, max_header_length, "Content-Length: %d",
-         (int)csp->content_length);
-      log_error(LOG_LEVEL_HEADER, "Adjusted Content-Length to %d",
-         (int)csp->content_length);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-/*********************************************************************
- *
- * Function    :  server_save_content_length
- *
- * Description :  Save the Content-Length sent by the server.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_save_content_length(struct client_state *csp, char **header)
-{
-   unsigned long long content_length = 0;
-
-   assert(*(*header+14) == ':');
-
-   if (1 != sscanf(*header+14, ": %llu", &content_length))
-   {
-      log_error(LOG_LEVEL_ERROR, "Crunching invalid header: %s", *header);
-      freez(*header);
-   }
-   else
-   {
-      csp->expected_content_length = content_length;
-      csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
-   }
-
-   return JB_ERR_OK;
-}
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-
-/*********************************************************************
- *
- * Function    :  server_content_md5
- *
- * Description :  Crumble any Content-MD5 headers if the document was
- *                modified. FIXME: Should we re-compute instead?
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_content_md5(struct client_state *csp, char **header)
-{
-   if (csp->flags & CSP_FLAG_MODIFIED)
-   {
-      log_error(LOG_LEVEL_HEADER, "Crunching Content-MD5");
-      freez(*header);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_content_disposition
- *
- * Description :  If enabled, blocks or modifies the "Content-Disposition" header.
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_content_disposition(struct client_state *csp, char **header)
-{
-   const char *newval;
-
-   /*
-    * Are we messing with the Content-Disposition header?
-    */
-   if ((csp->action->flags & ACTION_HIDE_CONTENT_DISPOSITION) == 0)
-   {
-      /* Me tinks not */
-      return JB_ERR_OK;
-   }
-
-   newval = csp->action->string[ACTION_STRING_CONTENT_DISPOSITION];
-
-   if ((newval == NULL) || (0 == strcmpic(newval, "block")))
-   {
-      /*
-       * Blocking content-disposition header
-       */
-      log_error(LOG_LEVEL_HEADER, "Crunching %s!", *header);
-      freez(*header);
-      return JB_ERR_OK;
-   }
-   else
-   {  
-      /*
-       * Replacing Content-Disposition header
-       */
-      freez(*header);
-      *header = strdup("Content-Disposition: ");
-      string_append(header, newval);
-
-      if (*header != NULL)
-      {
-         log_error(LOG_LEVEL_HEADER,
-            "Content-Disposition header crunched and replaced with: %s", *header);
-      }
-   }
-   return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_last_modified
- *
- * Description :  Changes Last-Modified header to the actual date
- *                to help hide-if-modified-since.
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_last_modified(struct client_state *csp, char **header)
-{
-   const char *newval;
-   char buf[BUFFER_SIZE];
-
-   char newheader[50];
-#ifdef HAVE_GMTIME_R
-   struct tm gmt;
-#endif
-   struct tm *timeptr = NULL;
-   time_t now, last_modified;                  
-   long int rtime;
-   long int days, hours, minutes, seconds;
-   
-   /*
-    * Are we messing with the Last-Modified header?
-    */
-   if ((csp->action->flags & ACTION_OVERWRITE_LAST_MODIFIED) == 0)
-   {
-      /*Nope*/
-      return JB_ERR_OK;
-   }
-
-   newval = csp->action->string[ACTION_STRING_LAST_MODIFIED];
-
-   if (0 == strcmpic(newval, "block") )
-   {
-      /*
-       * Blocking Last-Modified header. Useless but why not.
-       */
-      log_error(LOG_LEVEL_HEADER, "Crunching %s!", *header);
-      freez(*header);
-      return JB_ERR_OK;
-   }
-   else if (0 == strcmpic(newval, "reset-to-request-time"))
-   {  
-      /*
-       * Setting Last-Modified Header to now.
-       */
-      get_http_time(0, buf, sizeof(buf));
-      freez(*header);
-      *header = strdup("Last-Modified: ");
-      string_append(header, buf);   
-
-      if (*header == NULL)
-      {
-         log_error(LOG_LEVEL_HEADER, "Insufficient memory. Last-Modified header got lost, boohoo.");  
-      }
-      else
-      {
-         log_error(LOG_LEVEL_HEADER, "Reset to present time: %s", *header);
-      }
-   }
-   else if (0 == strcmpic(newval, "randomize"))
-   {
-      const char *header_time = *header + sizeof("Last-Modified:");
-
-      log_error(LOG_LEVEL_HEADER, "Randomizing: %s", *header);
-      now = time(NULL);
-#ifdef HAVE_GMTIME_R
-      timeptr = gmtime_r(&now, &gmt);
-#elif FEATURE_PTHREAD
-      privoxy_mutex_lock(&gmtime_mutex);
-      timeptr = gmtime(&now);
-      privoxy_mutex_unlock(&gmtime_mutex);
-#else
-      timeptr = gmtime(&now);
-#endif
-      if (JB_ERR_OK != parse_header_time(header_time, &last_modified))
-      {
-         log_error(LOG_LEVEL_HEADER, "Couldn't parse: %s in %s (crunching!)", header_time, *header);
-         freez(*header);
-      }
-      else
-      {
-         rtime = (long int)difftime(now, last_modified);
-         if (rtime)
-         {
-            int negative = 0;
-
-            if (rtime < 0)
-            {
-               rtime *= -1; 
-               negative = 1;
-               log_error(LOG_LEVEL_HEADER, "Server time in the future.");
-            }
-            rtime = pick_from_range(rtime);
-            if (negative) rtime *= -1;
-            last_modified += rtime;
-#ifdef HAVE_GMTIME_R
-            timeptr = gmtime_r(&last_modified, &gmt);
-#elif FEATURE_PTHREAD
-            privoxy_mutex_lock(&gmtime_mutex);
-            timeptr = gmtime(&last_modified);
-            privoxy_mutex_unlock(&gmtime_mutex);
-#else
-            timeptr = gmtime(&last_modified);
-#endif
-            strftime(newheader, sizeof(newheader), "%a, %d %b %Y %H:%M:%S GMT", timeptr);
-            freez(*header);
-            *header = strdup("Last-Modified: ");
-            string_append(header, newheader);
-
-            if (*header == NULL)
-            {
-               log_error(LOG_LEVEL_ERROR, "Insufficient memory, header crunched without replacement.");
-               return JB_ERR_MEMORY;  
-            }
-
-            days    = rtime / (3600 * 24);
-            hours   = rtime / 3600 % 24;
-            minutes = rtime / 60 % 60;
-            seconds = rtime % 60;
-
-            log_error(LOG_LEVEL_HEADER,
-               "Randomized:  %s (added %d da%s %d hou%s %d minut%s %d second%s",
-               *header, days, (days == 1) ? "y" : "ys", hours, (hours == 1) ? "r" : "rs",
-               minutes, (minutes == 1) ? "e" : "es", seconds, (seconds == 1) ? ")" : "s)");
-         }
-         else
-         {
-            log_error(LOG_LEVEL_HEADER, "Randomized ... or not. No time difference to work with.");
-         }
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_accept_encoding
- *
- * Description :  Rewrite the client's Accept-Encoding header so that
- *                if doesn't allow compression, if the action applies.
- *                Note: For HTTP/1.0 the absence of the header is enough.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_accept_encoding(struct client_state *csp, char **header)
-{
-   if ((csp->action->flags & ACTION_NO_COMPRESSION) != 0)
-   {
-      log_error(LOG_LEVEL_HEADER, "Suppressed offer to compress content");
-
-      freez(*header);
-
-      /* Temporarily disable the correct behaviour to
-       * work around a PHP bug. 
-       *
-       * if (!strcmpic(csp->http->ver, "HTTP/1.1"))
-       * {
-       *    *header = strdup("Accept-Encoding: identity;q=1.0, *;q=0");
-       *    if (*header == NULL)
-       *    {
-       *       return JB_ERR_MEMORY;
-       *    }
-       * }
-       * 
-       */
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_te
- *
- * Description :  Rewrite the client's TE header so that
- *                if doesn't allow compression, if the action applies.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_te(struct client_state *csp, char **header)
-{
-   if ((csp->action->flags & ACTION_NO_COMPRESSION) != 0)
-   {
-      freez(*header);
-      log_error(LOG_LEVEL_HEADER, "Suppressed offer to compress transfer");
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_referrer
- *
- * Description :  Handle the "referer" config setting properly.
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_referrer(struct client_state *csp, char **header)
-{
-   const char *parameter;
-   /* booleans for parameters we have to check multiple times */
-   int parameter_conditional_block;
-   int parameter_conditional_forge;
- 
-#ifdef FEATURE_FORCE_LOAD
-   /*
-    * Since the referrer can include the prefix even
-    * if the request itself is non-forced, we must
-    * clean it unconditionally.
-    *
-    * XXX: strclean is too broad
-    */
-   strclean(*header, FORCE_PREFIX);
-#endif /* def FEATURE_FORCE_LOAD */
-
-   if ((csp->action->flags & ACTION_HIDE_REFERER) == 0)
-   {
-      /* Nothing left to do */
-      return JB_ERR_OK;
-   }
-
-   parameter = csp->action->string[ACTION_STRING_REFERER];
-   assert(parameter != NULL);
-   parameter_conditional_block = (0 == strcmpic(parameter, "conditional-block"));
-   parameter_conditional_forge = (0 == strcmpic(parameter, "conditional-forge"));
-
-   if (!parameter_conditional_block && !parameter_conditional_forge)
-   {
-      /*
-       * As conditional-block and conditional-forge are the only
-       * parameters that rely on the original referrer, we can
-       * remove it now for all the others.
-       */
-      freez(*header);
-   }
-
-   if (0 == strcmpic(parameter, "block"))
-   {
-      log_error(LOG_LEVEL_HEADER, "Referer crunched!");
-      return JB_ERR_OK;
-   }
-   else if (parameter_conditional_block || parameter_conditional_forge)
-   {
-      return handle_conditional_hide_referrer_parameter(header,
-         csp->http->hostport, parameter_conditional_block);
-   }
-   else if (0 == strcmpic(parameter, "forge"))
-   {
-      return create_forged_referrer(header, csp->http->hostport);
-   }
-   else
-   {
-      /* interpret parameter as user-supplied referer to fake */
-      return create_fake_referrer(header, parameter);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_accept_language
- *
- * Description :  Handle the "Accept-Language" config setting properly.
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_accept_language(struct client_state *csp, char **header)
-{
-   const char *newval;
-
-   /*
-    * Are we messing with the Accept-Language?
-    */
-   if ((csp->action->flags & ACTION_HIDE_ACCEPT_LANGUAGE) == 0)
-   {
-      /*I don't think so*/
-      return JB_ERR_OK;
-   }
-
-   newval = csp->action->string[ACTION_STRING_LANGUAGE];
-
-   if ((newval == NULL) || (0 == strcmpic(newval, "block")) )
-   {
-      /*
-       * Blocking Accept-Language header
-       */
-      log_error(LOG_LEVEL_HEADER, "Crunching Accept-Language!");
-      freez(*header);
-      return JB_ERR_OK;
-   }
-   else
-   {  
-      /*
-       * Replacing Accept-Language header
-       */
-      freez(*header);
-      *header = strdup("Accept-Language: ");
-      string_append(header, newval);   
-
-      if (*header == NULL)
-      {
-         log_error(LOG_LEVEL_ERROR,
-            "Insufficient memory. Accept-Language header crunched without replacement.");  
-      }
-      else
-      {
-         log_error(LOG_LEVEL_HEADER,
-            "Accept-Language header crunched and replaced with: %s", *header);
-      }
-   }
-   return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  crunch_client_header
- *
- * Description :  Crunch client header if it matches a string supplied by the
- *                user. Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success and always succeeds
- *
- *********************************************************************/
-static jb_err crunch_client_header(struct client_state *csp, char **header)
-{
-   const char *crunch_pattern;
-
-   /* Do we feel like crunching? */
-   if ((csp->action->flags & ACTION_CRUNCH_CLIENT_HEADER))
-   {
-      crunch_pattern = csp->action->string[ACTION_STRING_CLIENT_HEADER];
-
-      /* Is the current header the lucky one? */
-      if (strstr(*header, crunch_pattern))
-      {
-         log_error(LOG_LEVEL_HEADER, "Crunching client header: %s (contains: %s)", *header, crunch_pattern);  
-         freez(*header);
-      }
-   }
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_uagent
- *
- * Description :  Handle the "user-agent" config setting properly
- *                and remember its original value to enable browser
- *                bug workarounds. Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_uagent(struct client_state *csp, char **header)
-{
-   const char *newval;
-
-   if ((csp->action->flags & ACTION_HIDE_USER_AGENT) == 0)
-   {
-      return JB_ERR_OK;
-   }
-
-   newval = csp->action->string[ACTION_STRING_USER_AGENT];
-   if (newval == NULL)
-   {
-      return JB_ERR_OK;
-   }
-
-   freez(*header);
-   *header = strdup("User-Agent: ");
-   string_append(header, newval);
-
-   log_error(LOG_LEVEL_HEADER, "Modified: %s", *header);
-
-   return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_ua
- *
- * Description :  Handle "ua-" headers properly.  Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_ua(struct client_state *csp, char **header)
-{
-   if ((csp->action->flags & ACTION_HIDE_USER_AGENT) != 0)
-   {
-      log_error(LOG_LEVEL_HEADER, "crunched User-Agent!");
-      freez(*header);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_from
- *
- * Description :  Handle the "from" config setting properly.
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_from(struct client_state *csp, char **header)
-{
-   const char *newval;
-
-   if ((csp->action->flags & ACTION_HIDE_FROM) == 0)
-   {
-      return JB_ERR_OK;
-   }
-
-   freez(*header);
-
-   newval = csp->action->string[ACTION_STRING_FROM];
-
-   /*
-    * Are we blocking the e-mail address?
-    */
-   if ((newval == NULL) || (0 == strcmpic(newval, "block")) )
-   {
-      log_error(LOG_LEVEL_HEADER, "crunched From!");
-      return JB_ERR_OK;
-   }
-
-   log_error(LOG_LEVEL_HEADER, " modified");
-
-   *header = strdup("From: ");
-   string_append(header, newval);
-
-   return (*header == NULL) ? JB_ERR_MEMORY : JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_send_cookie
- *
- * Description :  Crunches the "cookie" header if necessary.
- *                Called from `sed'.
- *
- *                XXX: Stupid name, doesn't send squat.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_send_cookie(struct client_state *csp, char **header)
-{
-   if (csp->action->flags & ACTION_NO_COOKIE_READ)
-   {
-      log_error(LOG_LEVEL_HEADER, "Crunched outgoing cookie: %s", *header);
-      freez(*header);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_x_forwarded
- *
- * Description :  Handle the "x-forwarded-for" config setting properly,
- *                also used in the add_client_headers list.  Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-jb_err client_x_forwarded(struct client_state *csp, char **header)
-{
-   if (0 != (csp->action->flags & ACTION_CHANGE_X_FORWARDED_FOR))
-   {
-      const char *parameter = csp->action->string[ACTION_STRING_CHANGE_X_FORWARDED_FOR];
-
-      if (0 == strcmpic(parameter, "block"))
-      {
-         freez(*header);
-         log_error(LOG_LEVEL_HEADER, "crunched x-forwarded-for!");
-      }
-      else if (0 == strcmpic(parameter, "add"))
-      {
-         string_append(header, ", ");
-         string_append(header, csp->ip_addr_str);
-
-         if (*header == NULL)
-         {
-            return JB_ERR_MEMORY;
-         }
-         log_error(LOG_LEVEL_HEADER,
-            "Appended client IP address to %s", *header);
-         csp->flags |= CSP_FLAG_X_FORWARDED_FOR_APPENDED;
-      }
-      else
-      {
-         log_error(LOG_LEVEL_FATAL,
-            "Invalid change-x-forwarded-for parameter: '%s'", parameter);
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_max_forwards
- *
- * Description :  If the HTTP method is OPTIONS or TRACE, subtract one
- *                from the value of the Max-Forwards header field.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_max_forwards(struct client_state *csp, char **header)
-{
-   int max_forwards;
-
-   if ((0 == strcmpic(csp->http->gpc, "trace")) ||
-       (0 == strcmpic(csp->http->gpc, "options")))
-   {
-      assert(*(*header+12) == ':');
-      if (1 == sscanf(*header+12, ": %d", &max_forwards))
-      {
-         if (max_forwards > 0)
-         {
-            snprintf(*header, strlen(*header)+1, "Max-Forwards: %d", --max_forwards);
-            log_error(LOG_LEVEL_HEADER,
-               "Max-Forwards value for %s request reduced to %d.",
-               csp->http->gpc, max_forwards);
-         }
-         else if (max_forwards < 0)
-         {
-            log_error(LOG_LEVEL_ERROR, "Crunching invalid header: %s", *header);
-            freez(*header);
-         }
-      }
-      else
-      {
-         log_error(LOG_LEVEL_ERROR, "Crunching invalid header: %s", *header);
-         freez(*header);
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_host
- *
- * Description :  If the request URI did not contain host and
- *                port information, parse and evaluate the Host
- *                header field.
- *
- *                Also, kill ill-formed HOST: headers as sent by
- *                Apple's iTunes software when used with a proxy.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_host(struct client_state *csp, char **header)
-{
-   char *p, *q;
-
-   /*
-    * If the header field name is all upper-case, chances are that it's
-    * an ill-formed one from iTunes. BTW, killing innocent headers here is
-    * not a problem -- they are regenerated later.
-    */
-   if ((*header)[1] == 'O')
-   {
-      log_error(LOG_LEVEL_HEADER, "Killed all-caps Host header line: %s", *header);
-      freez(*header);
-      return JB_ERR_OK;
-   }
-
-   if (!csp->http->hostport || (*csp->http->hostport == '*') ||  
-       *csp->http->hostport == ' ' || *csp->http->hostport == '\0')
-   {
-      
-      if (NULL == (p = strdup((*header)+6)))
-      {
-         return JB_ERR_MEMORY;
-      }
-      chomp(p);
-      if (NULL == (q = strdup(p)))
-      {
-         freez(p);
-         return JB_ERR_MEMORY;
-      }
-
-      freez(csp->http->hostport);
-      csp->http->hostport = p;
-      freez(csp->http->host);
-      csp->http->host = q;
-      q = strchr(csp->http->host, ':');
-      if (q != NULL)
-      {
-         /* Terminate hostname and evaluate port string */
-         *q++ = '\0';
-         csp->http->port = atoi(q);
-      }
-      else
-      {
-         csp->http->port = csp->http->ssl ? 443 : 80;
-      }
-
-      log_error(LOG_LEVEL_HEADER, "New host and port from Host field: %s = %s:%d",
-                csp->http->hostport, csp->http->host, csp->http->port);
-   }
-
-   /* Signal client_host_adder() to return right away */
-   csp->flags |= CSP_FLAG_HOST_HEADER_IS_SET;
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_if_modified_since
- *
- * Description :  Remove or modify the If-Modified-Since header.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_if_modified_since(struct client_state *csp, char **header)
-{
-   char newheader[50];
-#ifdef HAVE_GMTIME_R
-   struct tm gmt;
-#endif
-   struct tm *timeptr = NULL;
-   time_t tm = 0;                  
-   const char *newval;
-   long int rtime;
-   long int hours, minutes, seconds;
-   int negative = 0;
-   char * endptr;
-   
-   if ( 0 == strcmpic(*header, "If-Modified-Since: Wed, 08 Jun 1955 12:00:00 GMT"))
-   {
-      /* 
-       * The client got an error message because of a temporary problem,
-       * the problem is gone and the client now tries to revalidate our
-       * error message on the real server. The revalidation would always
-       * end with the transmission of the whole document and there is
-       * no need to expose the bogus If-Modified-Since header.
-       */
-      log_error(LOG_LEVEL_HEADER, "Crunching useless If-Modified-Since header.");
-      freez(*header);
-   }
-   else if (csp->action->flags & ACTION_HIDE_IF_MODIFIED_SINCE)
-   {
-      newval = csp->action->string[ACTION_STRING_IF_MODIFIED_SINCE];
-
-      if ((0 == strcmpic(newval, "block")))
-      {
-         log_error(LOG_LEVEL_HEADER, "Crunching %s", *header);
-         freez(*header);
-      }
-      else /* add random value */
-      {
-         const char *header_time = *header + sizeof("If-Modified-Since:");
-
-         if (JB_ERR_OK != parse_header_time(header_time, &tm))
-         {
-            log_error(LOG_LEVEL_HEADER, "Couldn't parse: %s in %s (crunching!)", header_time, *header);
-            freez(*header);
-         }
-         else
-         {
-            rtime = strtol(newval, &endptr, 0);
-            if (rtime)
-            {
-               log_error(LOG_LEVEL_HEADER, "Randomizing: %s (random range: %d minut%s)",
-                  *header, rtime, (rtime == 1 || rtime == -1) ? "e": "es");
-               if (rtime < 0)
-               {
-                  rtime *= -1; 
-                  negative = 1;
-               }
-               rtime *= 60;
-               rtime = pick_from_range(rtime);
-            }
-            else
-            {
-               log_error(LOG_LEVEL_ERROR, "Random range is 0. Assuming time transformation test.",
-                  *header);
-            }
-            tm += rtime * (negative ? -1 : 1);
-#ifdef HAVE_GMTIME_R
-            timeptr = gmtime_r(&tm, &gmt);
-#elif FEATURE_PTHREAD
-            privoxy_mutex_lock(&gmtime_mutex);
-            timeptr = gmtime(&tm);
-            privoxy_mutex_unlock(&gmtime_mutex);
-#else
-            timeptr = gmtime(&tm);
-#endif
-            strftime(newheader, sizeof(newheader), "%a, %d %b %Y %H:%M:%S GMT", timeptr);
-
-            freez(*header);
-            *header = strdup("If-Modified-Since: ");
-            string_append(header, newheader);
-
-            if (*header == NULL)
-            {
-               log_error(LOG_LEVEL_HEADER, "Insufficient memory, header crunched without replacement.");
-               return JB_ERR_MEMORY;  
-            }
-
-            hours   = rtime / 3600;
-            minutes = rtime / 60 % 60;
-            seconds = rtime % 60;
-
-            log_error(LOG_LEVEL_HEADER,
-               "Randomized:  %s (%s %d hou%s %d minut%s %d second%s",
-               *header, (negative) ? "subtracted" : "added", hours,
-               (hours == 1) ? "r" : "rs", minutes, (minutes == 1) ? "e" : "es",
-               seconds, (seconds == 1) ? ")" : "s)");
-         }
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_if_none_match
- *
- * Description :  Remove the If-None-Match header.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_if_none_match(struct client_state *csp, char **header)
-{
-   if (csp->action->flags & ACTION_CRUNCH_IF_NONE_MATCH)
-   {  
-      log_error(LOG_LEVEL_HEADER, "Crunching %s", *header);
-      freez(*header);
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_x_filter
- *
- * Description :  Disables filtering if the client set "X-Filter: No".
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success
- *
- *********************************************************************/
-jb_err client_x_filter(struct client_state *csp, char **header)
-{
-   if ( 0 == strcmpic(*header, "X-Filter: No"))
-   {
-      if (!(csp->config->feature_flags & RUNTIME_FEATURE_HTTP_TOGGLE))
-      {
-         log_error(LOG_LEVEL_INFO, "Ignored the client's request to fetch without filtering.");
-      }
-      else
-      {
-         if (csp->action->flags & ACTION_FORCE_TEXT_MODE)
-         {
-            log_error(LOG_LEVEL_HEADER,
-               "force-text-mode overruled the client's request to fetch without filtering!");
-         }
-         else
-         {  
-            csp->content_type = CT_TABOO; /* XXX: This hack shouldn't be necessary */
-            csp->flags |= CSP_FLAG_NO_FILTERING;
-            log_error(LOG_LEVEL_HEADER, "Accepted the client's request to fetch without filtering.");
-         }
-         log_error(LOG_LEVEL_HEADER, "Crunching %s", *header);
-         freez(*header);
-      }
-   }
-   return JB_ERR_OK; 
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_range
- *
- * Description :  Removes Range, Request-Range and If-Range headers if
- *                content filtering is enabled. If the client's version
- *                of the document has been altered by Privoxy, the server
- *                could interpret the range differently than the client
- *                intended in which case the user could end up with
- *                corrupted content.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK
- *
- *********************************************************************/
-static jb_err client_range(struct client_state *csp, char **header)
-{
-   if (content_filters_enabled(csp->action))
-   {
-      log_error(LOG_LEVEL_HEADER, "Content filtering is enabled."
-         " Crunching: \'%s\' to prevent range-mismatch problems.", *header);
-      freez(*header);
-   }
-
-   return JB_ERR_OK; 
-}
-
-/* the following functions add headers directly to the header list */
-
-/*********************************************************************
- *
- * Function    :  client_host_adder
- *
- * Description :  Adds the Host: header field if it is missing.
- *                Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_host_adder(struct client_state *csp)
-{
-   char *p;
-   jb_err err;
-
-   if (csp->flags & CSP_FLAG_HOST_HEADER_IS_SET)
-   {
-      /* Header already set by the client, nothing to do. */
-      return JB_ERR_OK;
-   }
-
-   if ( !csp->http->hostport || !*(csp->http->hostport))
-   {
-      /* XXX: When does this happen and why is it OK? */
-      log_error(LOG_LEVEL_INFO, "Weirdness in client_host_adder detected and ignored.");
-      return JB_ERR_OK;
-   }
-
-   /*
-    * remove 'user:pass@' from 'proto://user:pass@host'
-    */
-   if ( (p = strchr( csp->http->hostport, '@')) != NULL )
-   {
-      p++;
-   }
-   else
-   {
-      p = csp->http->hostport;
-   }
-
-   /* XXX: Just add it, we already made sure that it will be unique */
-   log_error(LOG_LEVEL_HEADER, "addh-unique: Host: %s", p);
-   err = enlist_unique_header(csp->headers, "Host", p);
-   return err;
-
-}
-
-
-#if 0
-/*********************************************************************
- *
- * Function    :  client_accept_encoding_adder
- *
- * Description :  Add an Accept-Encoding header to the client's request
- *                that disables compression if the action applies, and
- *                the header is not already there. Called from `sed'.
- *                Note: For HTTP/1.0, the absence of the header is enough.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_accept_encoding_adder(struct client_state *csp)
-{
-   if (   ((csp->action->flags & ACTION_NO_COMPRESSION) != 0)
-       && (!strcmpic(csp->http->ver, "HTTP/1.1")) )
-   {
-      return enlist_unique(csp->headers, "Accept-Encoding: identity;q=1.0, *;q=0", 16);
-   }
-
-   return JB_ERR_OK;
-}
-#endif
-
-
-/*********************************************************************
- *
- * Function    :  client_xtra_adder
- *
- * Description :  Used in the add_client_headers list.  Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_xtra_adder(struct client_state *csp)
-{
-   struct list_entry *lst;
-   jb_err err;
-
-   for (lst = csp->action->multi[ACTION_MULTI_ADD_HEADER]->first;
-        lst ; lst = lst->next)
-   {
-      log_error(LOG_LEVEL_HEADER, "addh: %s", lst->str);
-      err = enlist(csp->headers, lst->str);
-      if (err)
-      {
-         return err;
-      }
-
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_x_forwarded_for_adder
- *
- * Description :  Used in the add_client_headers list.  Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_x_forwarded_for_adder(struct client_state *csp)
-{
-   char *header = NULL;
-   jb_err err;
-
-   if (!((csp->action->flags & ACTION_CHANGE_X_FORWARDED_FOR)
-         && (0 == strcmpic(csp->action->string[ACTION_STRING_CHANGE_X_FORWARDED_FOR], "add")))
-      || (csp->flags & CSP_FLAG_X_FORWARDED_FOR_APPENDED))
-   {
-      /*
-       * If we aren't adding X-Forwarded-For headers,
-       * or we already appended an existing X-Forwarded-For
-       * header, there's nothing left to do here.
-       */
-      return JB_ERR_OK;
-   }
-
-   header = strdup("X-Forwarded-For: ");
-   string_append(&header, csp->ip_addr_str);
-
-   if (header == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   log_error(LOG_LEVEL_HEADER, "addh: %s", header);
-   err = enlist(csp->headers, header);
-   freez(header);
-
-   return err;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_connection_close_adder
- *
- * Description :  "Temporary" fix for the needed but missing HTTP/1.1
- *                support. Adds a "Connection: close" header to csp->headers
- *                unless the header was already present. Called from `sed'.
- *
- *                FIXME: This whole function shouldn't be neccessary!
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_connection_close_adder(struct client_state *csp)
-{
-   const unsigned int flags = csp->flags;
-   const char *response_status_line = csp->headers->first->str;
-
-   if ((flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE)
-    && (flags & CSP_FLAG_SERVER_CONNECTION_CLOSE_SET))
-   {
-      return JB_ERR_OK;
-   }
-
-   /*
-    * XXX: if we downgraded the response, this check will fail.
-    */
-   if ((csp->config->feature_flags &
-        RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
-    && (NULL != response_status_line)
-    && !strncmpic(response_status_line, "HTTP/1.1", 8))
-   {
-      log_error(LOG_LEVEL_HEADER, "A HTTP/1.1 response "
-         "without Connection header implies keep-alive.");
-      csp->flags |= CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE;
-   }
-
-   log_error(LOG_LEVEL_HEADER, "Adding: Connection: close");
-
-   return enlist(csp->headers, "Connection: close");
-}
-
-
-/*********************************************************************
- *
- * Function    :  client_connection_header_adder
- *
- * Description :  Adds a proper "Connection:" header to csp->headers
- *                unless the header was already present. Called from `sed'.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err client_connection_header_adder(struct client_state *csp)
-{
-   const unsigned int flags = csp->flags;
-   const char *wanted_header = get_appropiate_connection_header(csp);
-
-   if (!(flags & CSP_FLAG_CLIENT_HEADER_PARSING_DONE)
-     && (flags & CSP_FLAG_CLIENT_CONNECTION_HEADER_SET))
-   {
-      return JB_ERR_OK;
-   }
-
-   log_error(LOG_LEVEL_HEADER, "Adding: %s", wanted_header);
-
-   return enlist(csp->headers, wanted_header);
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_http
- *
- * Description :  - Save the HTTP Status into csp->http->status
- *                - Set CT_TABOO to prevent filtering if the answer
- *                  is a partial range (HTTP status 206)
- *                - Rewrite HTTP/1.1 answers to HTTP/1.0 if +downgrade
- *                  action applies.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_http(struct client_state *csp, char **header)
-{
-   sscanf(*header, "HTTP/%*d.%*d %d", &(csp->http->status));
-   if (csp->http->status == 206)
-   {
-      csp->content_type = CT_TABOO;
-   }
-
-   if ((csp->action->flags & ACTION_DOWNGRADE) != 0)
-   {
-      /* XXX: Should we do a real validity check here? */
-      if (strlen(*header) > 8)
-      {
-         (*header)[7] = '0';
-         log_error(LOG_LEVEL_HEADER, "Downgraded answer to HTTP/1.0");
-      }
-      else
-      {
-         /*
-          * XXX: Should we block the request or
-          * enlist a valid status code line here?
-          */
-         log_error(LOG_LEVEL_INFO, "Malformed server response detected. "
-            "Downgrading to HTTP/1.0 impossible.");
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  server_set_cookie
- *
- * Description :  Handle the server "cookie" header properly.
- *                Log cookie to the jar file.  Then "crunch",
- *                accept or rewrite it to a session cookie.
- *                Called from `sed'.
- *
- *                TODO: Allow the user to specify a new expiration
- *                time to cause the cookie to expire even before the
- *                browser is closed.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  header = On input, pointer to header to modify.
- *                On output, pointer to the modified header, or NULL
- *                to remove the header.  This function frees the
- *                original string if necessary.
- *
- * Returns     :  JB_ERR_OK on success, or
- *                JB_ERR_MEMORY on out-of-memory error.
- *
- *********************************************************************/
-static jb_err server_set_cookie(struct client_state *csp, char **header)
-{
-   time_t now;
-   time_t cookie_time; 
-
-   time(&now);
-
-   if ((csp->action->flags & ACTION_NO_COOKIE_SET) != 0)
-   {
-      log_error(LOG_LEVEL_HEADER, "Crunching incoming cookie: %s", *header);
-      freez(*header);
-   }
-   else if ((csp->action->flags & ACTION_NO_COOKIE_KEEP) != 0)
-   {
-      /* Flag whether or not to log a message */
-      int changed = 0;
-
-      /* A variable to store the tag we're working on */
-      char *cur_tag;
-
-      /* Skip "Set-Cookie:" (11 characters) in header */
-      cur_tag = *header + 11;
-
-      /* skip whitespace between "Set-Cookie:" and value */
-      while (*cur_tag && ijb_isspace(*cur_tag))
-      {
-         cur_tag++;
-      }
-
-      /* Loop through each tag in the cookie */
-      while (*cur_tag)
-      {
-         /* Find next tag */
-         char *next_tag = strchr(cur_tag, ';');
-         if (next_tag != NULL)
-         {
-            /* Skip the ';' character itself */
-            next_tag++;
-
-            /* skip whitespace ";" and start of tag */
-            while (*next_tag && ijb_isspace(*next_tag))
-            {
-               next_tag++;
-            }
-         }
-         else
-         {
-            /* "Next tag" is the end of the string */
-            next_tag = cur_tag + strlen(cur_tag);
-         }
-
-         /*
-          * Check the expiration date to see
-          * if the cookie is still valid, if yes,
-          * rewrite it to a session cookie.
-          */
-         if ((strncmpic(cur_tag, "expires=", 8) == 0) && *(cur_tag + 8))
-         {
-            char *expiration_date = cur_tag + 8; /* Skip "[Ee]xpires=" */
-
-            /* Did we detect the date properly? */
-            if (JB_ERR_OK != parse_header_time(expiration_date, &cookie_time))
-            {
-               /*
-                * Nope, treat it as if it was still valid.
-                *
-                * XXX: Should we remove the whole cookie instead?
-                */
-               log_error(LOG_LEVEL_ERROR,
-                  "Can't parse \'%s\', send by %s. Unsupported time format?", cur_tag, csp->http->url);
-               string_move(cur_tag, next_tag);
-               changed = 1;
-            }
-            else
-            {
-               /*
-                * Yes. Check if the cookie is still valid.
-                *
-                * If the cookie is already expired it's probably
-                * a delete cookie and even if it isn't, the browser
-                * will discard it anyway.
-                */
-
-               /*
-                * XXX: timegm() isn't available on some AmigaOS
-                * versions and our replacement doesn't work.
-                *
-                * Our options are to either:
-                *
-                * - disable session-cookies-only completely if timegm
-                *   is missing,
-                *
-                * - to simply remove all expired tags, like it has
-                *   been done until Privoxy 3.0.6 and to live with
-                *    the consequence that it can cause login/logout
-                *   problems on servers that don't validate their
-                *   input properly, or
-                *
-                * - to replace it with mktime in which
-                *   case there is a slight chance of valid cookies
-                *   passing as already expired.
-                *
-                *   This is the way it's currently done and it's not
-                *   as bad as it sounds. If the missing GMT offset is
-                *   enough to change the result of the expiration check
-                *   the cookie will be only valid for a few hours
-                *   anyway, which in many cases will be shorter
-                *   than a browser session.
-                */
-               if (cookie_time - now < 0)
-               {
-                  log_error(LOG_LEVEL_HEADER,
-                     "Cookie \'%s\' is already expired and can pass unmodified.", *header);
-                  /* Just in case some clown sets more then one expiration date */
-                  cur_tag = next_tag;
-               }
-               else
-               {
-                  /*
-                   * Still valid, delete expiration date by copying
-                   * the rest of the string over it.
-                   */
-                  string_move(cur_tag, next_tag);
-
-                  /* That changed the header, need to issue a log message */
-                  changed = 1;
-
-                  /*
-                   * Note that the next tag has now been moved to *cur_tag,
-                   * so we do not need to update the cur_tag pointer.
-                   */
-               }
-            }
-
-         }
-         else
-         {
-            /* Move on to next cookie tag */
-            cur_tag = next_tag;
-         }
-      }
-
-      if (changed)
-      {
-         assert(NULL != *header);
-         log_error(LOG_LEVEL_HEADER, "Cookie rewritten to a temporary one: %s",
-            *header);
-      }
-   }
-
-   return JB_ERR_OK;
-}
-
-
-#ifdef FEATURE_FORCE_LOAD
-/*********************************************************************
- *
- * Function    :  strclean
- *
- * Description :  In-Situ-Eliminate all occurances of substring in
- *                string
- *
- * Parameters  :
- *          1  :  string = string to clean
- *          2  :  substring = substring to eliminate
- *
- * Returns     :  Number of eliminations
- *
- *********************************************************************/
-int strclean(char *string, const char *substring)
-{
-   int hits = 0;
-   size_t len;
-   char *pos, *p;
-
-   len = strlen(substring);
-
-   while((pos = strstr(string, substring)) != NULL)
-   {
-      p = pos + len;
-      do
-      {
-         *(p - len) = *p;
-      }
-      while (*p++ != '\0');
-
-      hits++;
-   }
-
-   return(hits);
-}
-#endif /* def FEATURE_FORCE_LOAD */
-
-
-/*********************************************************************
- *
- * Function    :  parse_header_time
- *
- * Description :  Parses time formats used in HTTP header strings
- *                to get the numerical respresentation.
- *
- * Parameters  :
- *          1  :  header_time = HTTP header time as string. 
- *          2  :  result = storage for header_time in seconds
- *
- * Returns     :  JB_ERR_OK if the time format was recognized, or
- *                JB_ERR_PARSE otherwise.
- *
- *********************************************************************/
-static jb_err parse_header_time(const char *header_time, time_t *result)
-{
-   struct tm gmt;
-
-   /*
-    * Zero out gmt to prevent time zone offsets.
-    *
-    * While this is only necessary on some platforms
-    * (mingw32 for example), I don't know how to
-    * detect these automatically and doing it everywhere
-    * shouldn't hurt.
-    */
-   memset(&gmt, 0, sizeof(gmt));
-
-                            /* Tue, 02 Jun 2037 20:00:00 */
-   if ((NULL == strptime(header_time, "%a, %d %b %Y %H:%M:%S", &gmt))
-                            /* Tue, 02-Jun-2037 20:00:00 */
-    && (NULL == strptime(header_time, "%a, %d-%b-%Y %H:%M:%S", &gmt))
-                            /* Tue, 02-Jun-37 20:00:00 */
-    && (NULL == strptime(header_time, "%a, %d-%b-%y %H:%M:%S", &gmt))
-                        /* Tuesday, 02-Jun-2037 20:00:00 */
-    && (NULL == strptime(header_time, "%A, %d-%b-%Y %H:%M:%S", &gmt))
-                        /* Tuesday Jun 02 20:00:00 2037 */
-    && (NULL == strptime(header_time, "%A %b %d %H:%M:%S %Y", &gmt)))
-   {
-      return JB_ERR_PARSE;
-   }
-
-   *result = timegm(&gmt);
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_destination_from_headers
- *
- * Description :  Parse the "Host:" header to get the request's destination.
- *                Only needed if the client's request was forcefully
- *                redirected into Privoxy.
- *
- *                Code mainly copied from client_host() which is currently
- *                run too late for this purpose.
- *
- * Parameters  :
- *          1  :  headers = List of headers (one of them hopefully being
- *                the "Host:" header)
- *          2  :  http = storage for the result (host, port and hostport). 
- *
- * Returns     :  JB_ERR_MEMORY in case of memory problems,
- *                JB_ERR_PARSE if the host header couldn't be found,
- *                JB_ERR_OK otherwise.
- *
- *********************************************************************/
-jb_err get_destination_from_headers(const struct list *headers, struct http_request *http)
-{
-   char *q;
-   char *p;
-   char *host;
-
-   host = get_header_value(headers, "Host:");
-
-   if (NULL == host)
-   {
-      log_error(LOG_LEVEL_ERROR, "No \"Host:\" header found.");
-      return JB_ERR_PARSE;
-   }
-
-   if (NULL == (p = strdup((host))))
-   {
-      log_error(LOG_LEVEL_ERROR, "Out of memory while parsing \"Host:\" header");
-      return JB_ERR_MEMORY;
-   }
-   chomp(p);
-   if (NULL == (q = strdup(p)))
-   {
-      freez(p);
-      log_error(LOG_LEVEL_ERROR, "Out of memory while parsing \"Host:\" header");
-      return JB_ERR_MEMORY;
-   }
-
-   freez(http->hostport);
-   http->hostport = p;
-   freez(http->host);
-   http->host = q;
-   q = strchr(http->host, ':');
-   if (q != NULL)
-   {
-      /* Terminate hostname and evaluate port string */
-      *q++ = '\0';
-      http->port = atoi(q);
-   }
-   else
-   {
-      http->port = http->ssl ? 443 : 80;
-   }
-
-   /* Rebuild request URL */
-   freez(http->url);
-   http->url = strdup(http->ssl ? "https://"; : "http://";);
-   string_append(&http->url, http->hostport);
-   string_append(&http->url, http->path);
-   if (http->url == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   log_error(LOG_LEVEL_HEADER, "Destination extracted from \"Host:\" header. New request URL: %s",
-      http->url);
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  create_forged_referrer
- *
- * Description :  Helper for client_referrer to forge a referer as
- *                'http://[hostname:port/' to fool stupid
- *                checks for in-site links 
- *
- * Parameters  :
- *          1  :  header   = Pointer to header pointer
- *          2  :  hostport = Host and optionally port as string
- *
- * Returns     :  JB_ERR_OK in case of success, or
- *                JB_ERR_MEMORY in case of memory problems.
- *
- *********************************************************************/
-static jb_err create_forged_referrer(char **header, const char *hostport)
-{
-    assert(NULL == *header);
-
-    *header = strdup("Referer: http://";);
-    string_append(header, hostport);
-    string_append(header, "/");
-
-    if (NULL == *header)
-    {
-       return JB_ERR_MEMORY;
-    }
-
-    log_error(LOG_LEVEL_HEADER, "Referer forged to: %s", *header);
-
-    return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  create_fake_referrer
- *
- * Description :  Helper for client_referrer to create a fake referrer
- *                based on a string supplied by the user.
- *
- * Parameters  :
- *          1  :  header   = Pointer to header pointer
- *          2  :  hosthost = Referrer to fake
- *
- * Returns     :  JB_ERR_OK in case of success, or
- *                JB_ERR_MEMORY in case of memory problems.
- *
- *********************************************************************/
-static jb_err create_fake_referrer(char **header, const char *fake_referrer)
-{
-   assert(NULL == *header);
-
-   if ((0 != strncmpic(fake_referrer, "http://";, 7)) && (0 != strncmpic(fake_referrer, "https://";, 8)))
-   {
-      log_error(LOG_LEVEL_HEADER,
-         "Parameter: +hide-referrer{%s} is a bad idea, but I don't care.", fake_referrer);
-   }
-   *header = strdup("Referer: ");
-   string_append(header, fake_referrer);
-
-   if (NULL == *header)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   log_error(LOG_LEVEL_HEADER, "Referer replaced with: %s", *header);
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  handle_conditional_hide_referrer_parameter
- *
- * Description :  Helper for client_referrer to crunch or forge
- *                the referrer header if the host has changed.
- *
- * Parameters  :
- *          1  :  header = Pointer to header pointer
- *          2  :  host   = The target host (may include the port)
- *          3  :  parameter_conditional_block = Boolean to signal
- *                if we're in conditional-block mode. If not set,
- *                we're in conditional-forge mode.
- *
- * Returns     :  JB_ERR_OK in case of success, or
- *                JB_ERR_MEMORY in case of memory problems.
- *
- *********************************************************************/
-static jb_err handle_conditional_hide_referrer_parameter(char **header,
-   const char *host, const int parameter_conditional_block)
-{
-   char *referer = strdup(*header);
-   const size_t hostlenght = strlen(host);
-   const char *referer_url = NULL;
-
-   if (NULL == referer)
-   {
-      freez(*header);
-      return JB_ERR_MEMORY;
-   }
-
-   /* referer begins with 'Referer: http[s]://' */
-   if ((hostlenght+17) < strlen(referer))
-   {
-      /*
-       * Shorten referer to make sure the referer is blocked
-       * if www.example.org/www.example.com-shall-see-the-referer/
-       * links to www.example.com/
-       */
-      referer[hostlenght+17] = '\0';
-   }
-   referer_url = strstr(referer, "http://";);
-   if ((NULL == referer_url) || (NULL == strstr(referer_url, host)))
-   {
-      /* Host has changed, Referer is invalid or a https URL. */
-      if (parameter_conditional_block)
-      {
-         log_error(LOG_LEVEL_HEADER, "New host is: %s. Crunching %s!", host, *header);
-         freez(*header);
-      }
-      else
-      {
-         freez(*header);
-         freez(referer);
-         return create_forged_referrer(header, host);
-      }
-   }
-   freez(referer);
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  get_appropiate_connection_header
- *
- * Description :  Returns an appropiate Connection header
- *                depending on whether or not we try to keep
- *                the connection to the server alive.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *
- * Returns     :  Pointer to statically allocated header buffer.
- *
- *********************************************************************/
-static const char *get_appropiate_connection_header(const struct client_state *csp)
-{
-   static const char connection_keep_alive[] = "Connection: keep-alive";
-   static const char connection_close[] = "Connection: close";
-
-   if ((csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
-    && (csp->http->ssl == 0))
-   {
-      return connection_keep_alive;
-   }
-   return connection_close;
-}
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/parsers.c.rej b/external/privoxy/parsers.c.rej
deleted file mode 100644
index 84b4ba7..0000000
--- a/external/privoxy/parsers.c.rej
+++ /dev/null
@@ -1,16 +0,0 @@
-***************
-*** 986,991 ****
-  const add_header_func_ptr add_client_headers[] = {
-     client_host_adder,
-     client_cookie_adder,
-     client_xtra_adder,
-     /* Temporarily disabled:    client_accept_encoding_adder, */
-     connection_close_adder,
---- 983,989 ----
-  const add_header_func_ptr add_client_headers[] = {
-     client_host_adder,
-     client_cookie_adder,
-+    client_x_forwarded_adder,
-     client_xtra_adder,
-     /* Temporarily disabled:    client_accept_encoding_adder, */
-     connection_close_adder,
diff --git a/external/privoxy/parsers.h b/external/privoxy/parsers.h
deleted file mode 100644
index cf70be4..0000000
--- a/external/privoxy/parsers.h
+++ /dev/null
@@ -1,323 +0,0 @@
-#ifndef PARSERS_H_INCLUDED
-#define PARSERS_H_INCLUDED
-#define PARSERS_H_VERSION "$Id: parsers.h,v 1.49 2009/03/13 14:10:07 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/parsers.h,v $
- *
- * Purpose     :  Declares functions to parse/crunch headers and pages.
- *                Functions declared include:
- *                   `add_to_iob', `client_cookie_adder', `client_from',
- *                   `client_referrer', `client_send_cookie', `client_ua',
- *                   `client_uagent', `client_x_forwarded',
- *                   `client_x_forwarded_adder', `client_xtra_adder',
- *                   `content_type', `crumble', `destroy_list', `enlist',
- *                   `flush_socket', `free_http_request', `get_header',
- *                   `list_to_text', `parse_http_request', `sed',
- *                   and `server_set_cookie'.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: parsers.h,v $
- *    Revision 1.49  2009/03/13 14:10:07  fabiankeil
- *    Fix some more harmless warnings on amd64.
- *
- *    Revision 1.48  2008/05/30 15:57:23  fabiankeil
- *    Remove now-useless reference to debug.
- *
- *    Revision 1.47  2008/05/21 20:12:11  fabiankeil
- *    The whole point of strclean() is to modify the
- *    first parameter, so don't mark it immutable,
- *    even though the compiler lets us get away with it.
- *
- *    Revision 1.46  2008/05/21 15:47:14  fabiankeil
- *    Streamline sed()'s prototype and declare
- *    the header parse and add structures static.
- *
- *    Revision 1.45  2008/05/20 20:13:30  fabiankeil
- *    Factor update_server_headers() out of sed(), ditch the
- *    first_run hack and make server_patterns_light static.
- *
- *    Revision 1.44  2008/05/20 16:05:09  fabiankeil
- *    Move parsers structure definition from project.h to parsers.h.
- *
- *    Revision 1.43  2008/05/10 13:23:38  fabiankeil
- *    Don't provide get_header() with the whole client state
- *    structure when it only needs access to csp->iob.
- *
- *    Revision 1.42  2008/04/17 14:40:49  fabiankeil
- *    Provide get_http_time() with the buffer size so it doesn't
- *    have to blindly assume that the buffer is big enough.
- *
- *    Revision 1.41  2008/04/16 16:38:21  fabiankeil
- *    Don't pass the whole csp structure to flush_socket()
- *    when it only needs a file descriptor and a buffer.
- *
- *    Revision 1.40  2007/08/11 14:47:26  fabiankeil
- *    Remove the prototypes for functions that are only
- *    used in parsers.c and thus should be static.
- *
- *    Revision 1.39  2007/06/01 16:31:55  fabiankeil
- *    Change sed() to return a jb_err in preparation for forward-override{}.
- *
- *    Revision 1.38  2007/03/25 14:27:11  fabiankeil
- *    Let parse_header_time() return a jb_err code
- *    instead of a pointer that can only be used to
- *    check for NULL anyway.
- *
- *    Revision 1.37  2007/03/20 15:22:17  fabiankeil
- *    - Remove filter_client_header() and filter_client_header(),
- *      filter_header() now checks the shiny new
- *      CSP_FLAG_CLIENT_HEADER_PARSING_DONE flag instead.
- *
- *    Revision 1.36  2007/03/05 13:25:32  fabiankeil
- *    - Cosmetical changes for LOG_LEVEL_RE_FILTER messages.
- *    - Handle "Cookie:" and "Connection:" headers a bit smarter
- *      (don't crunch them just to recreate them later on).
- *    - Add another non-standard time format for the cookie
- *      expiration date detection.
- *    - Fix a valgrind warning.
- *
- *    Revision 1.35  2007/01/01 19:36:37  fabiankeil
- *    Integrate a modified version of Wil Mahan's
- *    zlib patch (PR #895531).
- *
- *    Revision 1.34  2006/12/29 19:08:22  fabiankeil
- *    Reverted parts of my last commit
- *    to keep error handling working.
- *
- *    Revision 1.33  2006/12/29 18:04:40  fabiankeil
- *    Fixed gcc43 conversion warnings.
- *
- *    Revision 1.32  2006/12/06 19:14:23  fabiankeil
- *    Added prototype for get_destination_from_headers().
- *
- *    Revision 1.31  2006/08/17 17:15:10  fabiankeil
- *    - Back to timegm() using GnuPG's replacement if necessary.
- *      Using mktime() and localtime() could add a on hour offset if
- *      the randomize factor was big enough to lead to a summer/wintertime
- *      switch.
- *
- *    - Removed now-useless Privoxy 3.0.3 compatibility glue.
- *
- *    - Moved randomization code into pick_from_range().
- *
- *    - Changed parse_header_time definition.
- *      time_t isn't guaranteed to be signed and
- *      if it isn't, -1 isn't available as error code.
- *      Changed some variable types in client_if_modified_since()
- *      because of the same reason.
- *
- *    Revision 1.30  2006/08/14 08:25:19  fabiankeil
- *    Split filter-headers{} into filter-client-headers{}
- *    and filter-server-headers{}.
- *    Added parse_header_time() to share some code.
- *    Replaced timegm() with mktime().
- *
- *    Revision 1.29  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.28  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.26.2.1  2002/09/25 14:52:46  oes
- *    Added basic support for OPTIONS and TRACE HTTP methods:
- *     - New parser function client_max_forwards which decrements
- *       the Max-Forwards HTTP header field of OPTIONS and TRACE
- *       requests by one before forwarding
- *     - New parser function client_host which extracts the host
- *       and port information from the HTTP header field if the
- *       request URI was not absolute
- *     - Don't crumble and re-add the Host: header, but only generate
- *       and append if missing
- *
- *    Revision 1.26  2002/05/08 15:59:53  oes
- *    Changed add_to_iob signature (now returns jb_err)
- *
- *    Revision 1.25  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.24  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.23  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.22  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.21  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.20  2002/02/20 23:15:13  jongfoster
- *    Parsing functions now handle out-of-memory gracefully by returning
- *    an error code.
- *
- *    Revision 1.19  2002/01/17 21:03:47  jongfoster
- *    Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- *    Revision 1.18  2001/10/26 17:40:23  oes
- *    Introduced get_header_value()
- *    Removed client_accept()
- *
- *    Revision 1.17  2001/10/13 12:47:32  joergs
- *    Removed client_host, added client_host_adder
- *
- *    Revision 1.16  2001/10/07 18:50:16  oes
- *    Added server_content_encoding, renamed server_transfer_encoding
- *
- *    Revision 1.15  2001/10/07 18:01:55  oes
- *    Changed server_http11 to server_http
- *
- *    Revision 1.14  2001/10/07 15:45:48  oes
- *    added client_accept_encoding, client_te, client_accept_encoding_adder
- *
- *    renamed content_type and content_length
- *
- *    fixed client_host and strclean prototypes
- *
- *    Revision 1.13  2001/09/29 12:56:03  joergs
- *    IJB now changes HTTP/1.1 to HTTP/1.0 in requests and answers.
- *
- *    Revision 1.12  2001/09/13 23:05:50  jongfoster
- *    Changing the string paramater to the header parsers a "const".
- *
- *    Revision 1.11  2001/07/31 14:46:53  oes
- *    Added prototype for connection_close_adder
- *
- *    Revision 1.10  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.9  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.8  2001/07/13 14:01:54  oes
- *    Removed all #ifdef PCRS
- *
- *    Revision 1.7  2001/06/29 13:32:14  oes
- *    Removed logentry from cancelled commit
- *
- *    Revision 1.6  2001/06/03 19:12:38  oes
- *    deleted const struct interceptors
- *
- *    Revision 1.5  2001/05/31 21:30:33  jongfoster
- *    Removed list code - it's now in list.[ch]
- *    Renamed "permission" to "action", and changed many features
- *    to use the actions file rather than the global config.
- *
- *    Revision 1.4  2001/05/27 13:19:06  oes
- *    Patched Joergs solution for the content-length in.
- *
- *    Revision 1.3  2001/05/26 13:39:32  jongfoster
- *    Only crunches Content-Length header if applying RE filtering.
- *    Without this fix, Microsoft Windows Update wouldn't work.
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:01  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Used for sed()'s second argument. */
-#define FILTER_CLIENT_HEADERS 0
-#define FILTER_SERVER_HEADERS 1
-
-extern long flush_socket(jb_socket fd, struct iob *iob);
-extern jb_err add_to_iob(struct client_state *csp, char *buf, long n);
-extern jb_err decompress_iob(struct client_state *csp);
-extern char *get_header(struct iob *iob);
-extern char *get_header_value(const struct list *header_list, const char *header_name);
-extern jb_err sed(struct client_state *csp, int filter_server_headers);
-extern jb_err update_server_headers(struct client_state *csp);
-extern void get_http_time(int time_offset, char *buf, size_t buffer_size);
-extern jb_err get_destination_from_headers(const struct list *headers, struct http_request *http);
-
-#ifdef FEATURE_FORCE_LOAD
-extern int strclean(char *string, const char *substring);
-#endif /* def FEATURE_FORCE_LOAD */
-
-/* Revision control strings from this header and associated .c file */
-extern const char parsers_rcs[];
-extern const char parsers_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef PARSERS_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/pcre/Makefile.in b/external/privoxy/pcre/Makefile.in
deleted file mode 100644
index 94edf49..0000000
--- a/external/privoxy/pcre/Makefile.in
+++ /dev/null
@@ -1,219 +0,0 @@
-
-# Makefile.in for PCRE (Perl-Compatible Regular Expression) library.
-
-#---------------------------------------------------------------------------#
-# To build mingw32 DLL uncomment the next two lines. This addition for      #
-# mingw32 was contributed by <Paul.Sokolovsky@xxxxxxxxxxxxxxxx>. I (Philip  #
-# Hazel) don't know anything about it! There are some additional targets at #
-# the bottom of this Makefile.                                              #
-#---------------------------------------------------------------------------#
-#
-# include dll.mk
-# DLL_LDFLAGS=-s
-
-
-#---------------------------------------------------------------------------#
-# The next few lines are modified by "configure" to insert data that it is  #
-# given in its arguments, or which it finds out for itself.                 #
-#---------------------------------------------------------------------------#
-
-# BINDIR is the directory in which the pcregrep command is installed.
-# INCDIR is the directory in which the public header file pcre.h is installed.
-# LIBDIR is the directory in which the libraries are installed.
-# MANDIR is the directory in which the man pages are installed.
-# The pcretest program, as it is a test program, does not get installed
-# anywhere.
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-BINDIR = @bindir@
-LIBDIR = @libdir@
-INCDIR = @includedir@
-MANDIR = @mandir@
-
-CC = @CC@
-CFLAGS = @CFLAGS@
-RANLIB = @RANLIB@
-UTF8   = @UTF8@
-
-# LIBTOOL defaults to "./libtool", which enables the building of shared
-# libraries. If "configure" is called with --disable-shared-libraries, LIBTOOL
-# is set to "", which stops shared libraries from being built, and LIBSUFFIX
-# is set to "a" instead of "la", which causes the shared libraries not to be
-# installed.
-
-LIBTOOL = @LIBTOOL@
-LIBSUFFIX = @LIBSUFFIX@
-
-# These are the version numbers for the shared libraries
-
-PCRELIBVERSION = @PCRE_LIB_VERSION@
-PCREPOSIXLIBVERSION = @PCRE_POSIXLIB_VERSION@
-
-
-#---------------------------------------------------------------------------#
-# A copy of install-sh is in this distribution and is used by default.      #
-#---------------------------------------------------------------------------#
-
-INSTALL = ./install-sh -c
-INSTALL_DATA = ${INSTALL} -m 644
-
-
-#---------------------------------------------------------------------------#
-# For almost all systems, the command to create a library is "ar cq", but   #
-# there is at least one where it is different, so this command must be      #
-# configurable. However, I haven't got round to learning how to make        #
-# "configure" find this out for itself. It is necessary to use a command    #
-# such as "make AR='ar -rc'" if you need to vary this. The setting of AR is #
-# *not* passed over to ./ltconfig, because it does its own setting up.      #
-#---------------------------------------------------------------------------#
-
-AR = ar cq
-
-
-##############################################################################
-
-
-OBJ = maketables.o get.o study.o pcre.o
-LOBJ = maketables.lo get.lo study.lo pcre.lo
-
-all:            libtool libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest pcregrep
-
-libtool:        config.guess config.sub ltconfig ltmain.sh
-		@if test "$(LIBTOOL)" = "./libtool"; then \
-		  echo '--- Building libtool ---'; \
-		  CC=$(CC) CFLAGS='$(CFLAGS)' RANLIB='$(RANLIB)' ./ltconfig ./ltmain.sh; \
-		  echo '--- Built libtool ---'; fi
-
-pcregrep:       libpcre.$(LIBSUFFIX) pcregrep.o
-		  @echo ' '
-		  @echo '--- Building pcregrep utility'
-		  @echo ' '
-		$(LIBTOOL) $(CC) $(CFLAGS) -o pcregrep pcregrep.o libpcre.$(LIBSUFFIX)
-
-pcretest:       libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest.o
-		  @echo ' '
-		  @echo '--- Building pcretest testing program'
-		  @echo ' '
-		$(LIBTOOL) $(PURIFY) $(CC) $(CFLAGS) -o pcretest pcretest.o \
-		  libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX)
-
-libpcre.a:      $(OBJ)
-		@echo ' '
-		@echo '--- Building static library: libpcre'
-		@echo ' '
-		-rm -f libpcre.a
-		$(AR) libpcre.a $(OBJ)
-		$(RANLIB) libpcre.a
-
-libpcre.la:     $(OBJ)
-		@echo ' '
-		@echo '--- Building shared library: libpcre'
-		@echo ' '
-		-rm -f libpcre.la
-		./libtool $(CC) -version-info '$(PCRELIBVERSION)' -o libpcre.la -rpath $(LIBDIR) $(LOBJ)
-
-libpcreposix.a: pcreposix.o
-		@echo ' '
-		@echo '--- Building static library: libpcreposix'
-		@echo ' '
-		-rm -f libpcreposix.a
-		$(AR) libpcreposix.a pcreposix.o
-		$(RANLIB) libpcreposix.a
-
-libpcreposix.la: pcreposix.o
-		@echo ' '
-		@echo '--- Building shared library: libpcreposix'
-		@echo ' '
-		-rm -f libpcreposix.la
-		./libtool $(CC) -version-info '$(PCREPOSIXLIBVERSION)' -o libpcreposix.la -rpath $(LIBDIR) pcreposix.lo
-
-pcre.o:         chartables.c pcre.c pcre.h internal.h config.h Makefile
-		$(LIBTOOL) $(CC) -c $(CFLAGS) $(UTF8) pcre.c
-
-pcreposix.o:    pcreposix.c pcreposix.h internal.h pcre.h config.h Makefile
-		$(LIBTOOL) $(CC) -c $(CFLAGS) pcreposix.c
-
-maketables.o:   maketables.c pcre.h internal.h config.h Makefile
-		$(LIBTOOL) $(CC) -c $(CFLAGS) maketables.c
-
-get.o:          get.c pcre.h internal.h config.h Makefile
-		$(LIBTOOL) $(CC) -c $(CFLAGS) get.c
-
-study.o:        study.c pcre.h internal.h config.h Makefile
-		$(LIBTOOL) $(CC) -c $(CFLAGS) $(UTF8) study.c
-
-pcretest.o:     pcretest.c pcre.h config.h Makefile
-		$(CC) -c $(CFLAGS) $(UTF8) pcretest.c
-
-pcregrep.o:     pcregrep.c pcre.h Makefile config.h
-		$(CC) -c $(CFLAGS) $(UTF8) pcregrep.c
-
-# An auxiliary program makes the default character table source
-
-chartables.c:   dftables
-		./dftables >chartables.c
-
-dftables:       dftables.c maketables.c pcre.h internal.h config.h Makefile
-		$(CC) -o dftables $(CFLAGS) dftables.c
-
-install:        all
-		$(LIBTOOL) $(INSTALL_DATA) libpcre.$(LIBSUFFIX) $(DESTDIR)/$(LIBDIR)/libpcre.$(LIBSUFFIX)
-		$(LIBTOOL) $(INSTALL_DATA) libpcreposix.$(LIBSUFFIX) $(DESTDIR)/$(LIBDIR)/libpcreposix.$(LIBSUFFIX)
-		$(INSTALL_DATA) pcre.h $(DESTDIR)/$(INCDIR)/pcre.h
-		$(INSTALL_DATA) pcreposix.h $(DESTDIR)/$(INCDIR)/pcreposix.h
-		$(INSTALL_DATA) doc/pcre.3 $(DESTDIR)/$(MANDIR)/man3/pcre.3
-		$(INSTALL_DATA) doc/pcreposix.3 $(DESTDIR)/$(MANDIR)/man3/pcreposix.3
-		$(INSTALL_DATA) doc/pcregrep.1 $(DESTDIR)/$(MANDIR)/man1/pcregrep.1
-		@if test "$(LIBTOOL)" = "./libtool"; then \
-		  echo ' '; \
-		  echo '--- Rebuilding pcregrep to use installed shared library ---'; \
-		  echo $(CC) $(CFLAGS) -o pcregrep pcregrep.o -L$(DESTDIR)/$(LIBDIR) -lpcre; \
-		  $(CC) $(CFLAGS) -o pcregrep pcregrep.o -L$(DESTDIR)/$(LIBDIR) -lpcre; \
-		  echo '--- Rebuilding pcretest to use installed shared library ---'; \
-		  echo $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(DESTDIR)/$(LIBDIR) -lpcre -lpcreposix; \
-		  $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(DESTDIR)/$(LIBDIR) -lpcre -lpcreposix; \
-		fi
-		$(INSTALL)	pcregrep $(DESTDIR)/$(BINDIR)/pcregrep
-		$(INSTALL)	pcre-config $(DESTDIR)/$(BINDIR)/pcre-config
-
-# We deliberately omit dftables and chartables.c from 'make clean'; once made
-# chartables.c shouldn't change, and if people have edited the tables by hand,
-# you don't want to throw them away.
-
-clean:;         -rm -rf *.o *.lo *.a *.la .libs pcretest pcregrep testtry
-
-# But "make distclean" should get back to a virgin distribution
-
-distclean:      clean
-		-rm -f chartables.c libtool pcre-config pcre.h \
-		Makefile config.h config.status config.log config.cache
-
-check:          runtest
-
-test:           runtest
-
-runtest:        all
-		./RunTest
-
-######## MINGW32 ############### MINGW32 ############### MINGW32 #############
-
-# This addition for mingw32 was contributed by  Paul Sokolovsky
-# <Paul.Sokolovsky@xxxxxxxxxxxxxxxx>. I (PH) don't know anything about it!
-
-dll:            _dll libpcre.dll.a pcregrep_d pcretest_d
-
-_dll:
-		$(MAKE) CFLAGS=-DSTATIC pcre.dll
-
-pcre.dll:       $(OBJ) pcreposix.o pcre.def
-libpcre.dll.a:  pcre.def
-
-pcregrep_d:     libpcre.dll.a pcregrep.o
-		$(CC) $(CFLAGS) -L. -o pcregrep pcregrep.o -lpcre.dll
-
-pcretest_d:     libpcre.dll.a pcretest.o
-		$(PURIFY) $(CC) $(CFLAGS) -L. -o pcretest pcretest.o -lpcre.dll
-
-# End
diff --git a/external/privoxy/pcre/RunTest.in b/external/privoxy/pcre/RunTest.in
deleted file mode 100644
index 6e4eb08..0000000
--- a/external/privoxy/pcre/RunTest.in
+++ /dev/null
@@ -1,148 +0,0 @@
-#! /bin/sh
-
-# This file is generated by configure from RunTest.in. Make any changes
-# to that file.
-
-# Run PCRE tests
-
-cf=diff
-
-# Select which tests to run; if no selection, run all
-
-do1=no
-do2=no
-do3=no
-do4=no
-do5=no
-do6=no
-
-while [ $# -gt 0 ] ; do
-  case $1 in
-    1) do1=yes;;
-    2) do2=yes;;
-    3) do3=yes;;
-    4) do4=yes;;
-    5) do5=yes;; 
-    6) do6=yes;; 
-    *) echo "Unknown test number $1"; exit 1;;
-  esac
-  shift
-done
-
-if [ "@UTF8@" = "" ] ; then
-  if [ $do5 = yes ] ; then
-    echo "Can't run test 5 because UFT8 support is not configured"
-    exit 1
-  fi   
-  if [ $do6 = yes ] ; then
-    echo "Can't run test 6 because UFT8 support is not configured"
-    exit 1
-  fi   
-fi    
-
-if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a\
-     $do5 = no -a $do6 = no ] ; then
-  do1=yes
-  do2=yes
-  do3=yes
-  do4=yes
-  if [ "@UTF8@" != "" ] ; then do5=yes; fi
-  if [ "@UTF8@" != "" ] ; then do6=yes; fi
-fi
-
-# Primary test, Perl-compatible
-
-if [ $do1 = yes ] ; then
-  echo "Testing main functionality (Perl compatible)"
-  ./pcretest testdata/testinput1 testtry
-  if [ $? = 0 ] ; then
-    $cf testtry testdata/testoutput1
-    if [ $? != 0 ] ; then exit 1; fi
-  else exit 1
-  fi
-fi
-
-# PCRE tests that are not Perl-compatible - API & error tests, mostly
-
-if [ $do2 = yes ] ; then
-  echo "Testing API and error handling (not Perl compatible)"
-  ./pcretest -i testdata/testinput2 testtry
-  if [ $? = 0 ] ; then
-    $cf testtry testdata/testoutput2
-    if [ $? != 0 ] ; then exit 1; fi
-  else exit 1
-  fi
-fi
-
-# Additional Perl-compatible tests for Perl 5.005's new features
-
-if [ $do3 = yes ] ; then
-  echo "Testing Perl 5.005 features (Perl 5.005 compatible)"
-  ./pcretest testdata/testinput3 testtry
-  if [ $? = 0 ] ; then
-    $cf testtry testdata/testoutput3
-    if [ $? != 0 ] ; then exit 1; fi
-  else exit 1
-  fi
-fi
-
-if [ $do1 = yes -a $do2 = yes -a $do3 = yes ] ; then
-  echo " " 
-  echo "The three main tests all ran OK"
-  echo " " 
-fi
-
-# Locale-specific tests, provided the "fr" locale is available
-
-if [ $do4 = yes ] ; then
-  locale -a | grep '^fr$' >/dev/null
-  if [ $? -eq 0 ] ; then
-    echo "Testing locale-specific features (using 'fr' locale)"
-    ./pcretest testdata/testinput4 testtry
-    if [ $? = 0 ] ; then
-      $cf testtry testdata/testoutput4
-      if [ $? != 0 ] ; then 
-        echo " "
-        echo "Locale test did not run entirely successfully."
-        echo "This usually means that there is a problem with the locale"
-        echo "settings rather than a bug in PCRE."    
-      else
-      echo "Locale test ran OK" 
-      fi 
-      echo " " 
-    else exit 1
-    fi
-  else
-    echo "Cannot test locale-specific features - 'fr' locale not found,"
-    echo "or the \"locale\" command is not available to check for it."
-    echo " " 
-  fi
-fi
-
-# Additional tests for UTF8 support
-
-if [ $do5 = yes ] ; then
-  echo "Testing experimental, incomplete UTF8 support (Perl compatible)"
-  ./pcretest testdata/testinput5 testtry 
-  if [ $? = 0 ] ; then
-    $cf testtry testdata/testoutput5
-    if [ $? != 0 ] ; then exit 1; fi
-  else exit 1
-  fi
-  echo "UTF8 test ran OK"
-  echo " "
-fi
-
-if [ $do6 = yes ] ; then
-  echo "Testing API and internals for UTF8 support (not Perl compatible)"
-  ./pcretest testdata/testinput6 testtry 
-  if [ $? = 0 ] ; then
-    $cf testtry testdata/testoutput6
-    if [ $? != 0 ] ; then exit 1; fi
-  else exit 1
-  fi
-  echo "UTF8 internals test ran OK"
-  echo " "
-fi
-
-# End
diff --git a/external/privoxy/pcre/chartables.c b/external/privoxy/pcre/chartables.c
deleted file mode 100644
index 9055da2..0000000
--- a/external/privoxy/pcre/chartables.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/* This file is automatically written by the dftables auxiliary 
-program. If you edit it by hand, you might like to edit the Makefile to 
-prevent its ever being regenerated.
-
-This file is #included in the compilation of pcre.c to build the default
-character tables which are used when no tables are passed to the compile
-function. */
-
-static unsigned char pcre_default_tables[] = {
-
-/* This table is a lower casing table. */
-
-    0,  1,  2,  3,  4,  5,  6,  7,
-    8,  9, 10, 11, 12, 13, 14, 15,
-   16, 17, 18, 19, 20, 21, 22, 23,
-   24, 25, 26, 27, 28, 29, 30, 31,
-   32, 33, 34, 35, 36, 37, 38, 39,
-   40, 41, 42, 43, 44, 45, 46, 47,
-   48, 49, 50, 51, 52, 53, 54, 55,
-   56, 57, 58, 59, 60, 61, 62, 63,
-   64, 97, 98, 99,100,101,102,103,
-  104,105,106,107,108,109,110,111,
-  112,113,114,115,116,117,118,119,
-  120,121,122, 91, 92, 93, 94, 95,
-   96, 97, 98, 99,100,101,102,103,
-  104,105,106,107,108,109,110,111,
-  112,113,114,115,116,117,118,119,
-  120,121,122,123,124,125,126,127,
-  128,129,130,131,132,133,134,135,
-  136,137,138,139,140,141,142,143,
-  144,145,146,147,148,149,150,151,
-  152,153,154,155,156,157,158,159,
-  160,161,162,163,164,165,166,167,
-  168,169,170,171,172,173,174,175,
-  176,177,178,179,180,181,182,183,
-  184,185,186,187,188,189,190,191,
-  192,193,194,195,196,197,198,199,
-  200,201,202,203,204,205,206,207,
-  208,209,210,211,212,213,214,215,
-  216,217,218,219,220,221,222,223,
-  224,225,226,227,228,229,230,231,
-  232,233,234,235,236,237,238,239,
-  240,241,242,243,244,245,246,247,
-  248,249,250,251,252,253,254,255,
-
-/* This table is a case flipping table. */
-
-    0,  1,  2,  3,  4,  5,  6,  7,
-    8,  9, 10, 11, 12, 13, 14, 15,
-   16, 17, 18, 19, 20, 21, 22, 23,
-   24, 25, 26, 27, 28, 29, 30, 31,
-   32, 33, 34, 35, 36, 37, 38, 39,
-   40, 41, 42, 43, 44, 45, 46, 47,
-   48, 49, 50, 51, 52, 53, 54, 55,
-   56, 57, 58, 59, 60, 61, 62, 63,
-   64, 97, 98, 99,100,101,102,103,
-  104,105,106,107,108,109,110,111,
-  112,113,114,115,116,117,118,119,
-  120,121,122, 91, 92, 93, 94, 95,
-   96, 65, 66, 67, 68, 69, 70, 71,
-   72, 73, 74, 75, 76, 77, 78, 79,
-   80, 81, 82, 83, 84, 85, 86, 87,
-   88, 89, 90,123,124,125,126,127,
-  128,129,130,131,132,133,134,135,
-  136,137,138,139,140,141,142,143,
-  144,145,146,147,148,149,150,151,
-  152,153,154,155,156,157,158,159,
-  160,161,162,163,164,165,166,167,
-  168,169,170,171,172,173,174,175,
-  176,177,178,179,180,181,182,183,
-  184,185,186,187,188,189,190,191,
-  192,193,194,195,196,197,198,199,
-  200,201,202,203,204,205,206,207,
-  208,209,210,211,212,213,214,215,
-  216,217,218,219,220,221,222,223,
-  224,225,226,227,228,229,230,231,
-  232,233,234,235,236,237,238,239,
-  240,241,242,243,244,245,246,247,
-  248,249,250,251,252,253,254,255,
-
-/* This table contains bit maps for various character classes.
-Each map is 32 bytes long and the bits run from the least
-significant end of each byte. The classes that have their own
-maps are: space, xdigit, digit, upper, lower, word, graph
-print, punct, and cntrl. Other classes are built from combinations. */
-
-  0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
-  0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
-  0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,
-  0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
-  0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc,
-  0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-  0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-
-/* This table identifies various classes of character by individual bits:
-  0x01   white space character
-  0x02   letter
-  0x04   decimal digit
-  0x08   hexadecimal digit
-  0x10   alphanumeric or '_'
-  0x80   regular expression metacharacter or binary zero
-*/
-
-  0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
-  0x00,0x01,0x01,0x01,0x01,0x01,0x00,0x00, /*   8- 15 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
-  0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /*    - '  */
-  0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /*  ( - /  */
-  0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /*  0 - 7  */
-  0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /*  8 - ?  */
-  0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  @ - G  */
-  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  H - O  */
-  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  P - W  */
-  0x12,0x12,0x12,0x80,0x00,0x00,0x80,0x10, /*  X - _  */
-  0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  ` - g  */
-  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  h - o  */
-  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  p - w  */
-  0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /*  x -127 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
-  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */
-
-/* End of chartables.c */
diff --git a/external/privoxy/pcre/config.guess b/external/privoxy/pcre/config.guess
deleted file mode 100644
index e1b5871..0000000
--- a/external/privoxy/pcre/config.guess
+++ /dev/null
@@ -1,1121 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
-#   Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Written by Per Bothner <bothner@xxxxxxxxxx>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
-# Please send patches to <autoconf-patches@xxxxxxx>.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
-
-# Use $HOST_CC if defined. $CC may point to a cross-compiler
-if test x"$CC_FOR_BUILD" = x; then
-  if test x"$HOST_CC" != x; then
-    CC_FOR_BUILD="$HOST_CC"
-  else
-    if test x"$CC" != x; then
-      CC_FOR_BUILD="$CC"
-    else
-      CC_FOR_BUILD=cc
-    fi
-  fi
-fi
-
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@xxxxxxxxxxxxxxx 8/24/94.)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	cat <<EOF >$dummy.s
-	.globl main
-	.ent main
-main:
-	.frame \$30,0,\$26,0
-	.prologue 0
-	.long 0x47e03d80 # implver $0
-	lda \$2,259
-	.long 0x47e20c21 # amask $2,$1
-	srl \$1,8,\$2
-	sll \$2,2,\$2
-	sll \$0,3,\$0
-	addl \$1,\$0,\$0
-	addl \$2,\$0,\$0
-	ret \$31,(\$26),1
-	.end main
-EOF
-	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		./$dummy
-		case "$?" in
-			7)
-				UNAME_MACHINE="alpha"
-				;;
-			15)
-				UNAME_MACHINE="alphaev5"
-				;;
-			14)
-				UNAME_MACHINE="alphaev56"
-				;;
-			10)
-				UNAME_MACHINE="alphapca56"
-				;;
-			16)
-				UNAME_MACHINE="alphaev6"
-				;;
-		esac
-	fi
-	rm -f $dummy.s $dummy
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit 0 ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit 0 ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-cbm-sysv4
-	exit 0;;
-    amiga:NetBSD:*:*)
-      echo m68k-cbm-netbsd${UNAME_RELEASE}
-      exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
-    arc64:OpenBSD:*:*)
-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hkmips:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit 0 ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
-    arm32:NetBSD:*:*)
-	echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    SR2?01:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@xxxxxxxxxxxxxxxxxxxx (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit 0 ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit 0 ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:NetBSD:*:*)
-	echo m68k-atari-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor 
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
-    sun3*:NetBSD:*:*)
-	echo m68k-sun-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:NetBSD:*:*)
-	echo m68k-apple-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:NetBSD:*:*)
-        echo powerpc-apple-netbsd${UNAME_RELEASE}
-        exit 0 ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy \
-	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit 0 ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit 0 ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit 0 ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit 0 ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit 0 ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit 0 ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit 0 ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i?86:AIX:*:*)
-	echo i386-ibm-aix
-	exit 0 ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
-		rm -f $dummy.c $dummy
-		echo rs6000-ibm-aix3.2.5
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit 0 ;;
-    *:AIX:*:4)
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=4.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit 0 ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit 0 ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit 0 ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit 0 ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit 0 ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit 0 ;;
-    9000/[34678]??:HP-UX:*:*)
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-              sed 's/^              //' << EOF >$dummy.c
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-	rm -f $dummy.c $dummy
-	esac
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    3050*:HI-UX:*:*)
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
-	rm -f $dummy.c $dummy
-	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit 0 ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit 0 ;;
-    *9??*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit 0 ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit 0 ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit 0 ;;
-    i?86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit 0 ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit 0 ;;
-    hppa*:OpenBSD:*:*)
-	echo hppa-unknown-openbsd
-	exit 0 ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit 0 ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit 0 ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit 0 ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit 0 ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit 0 ;;
-    CRAY*X-MP:*:*:*)
-	echo xmp-cray-unicos
-        exit 0 ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
-	exit 0 ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY*T3E:*:*:*)
-	echo alpha-cray-unicosmk${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY-2:*:*:*)
-	echo cray2-cray-unicos
-        exit 0 ;;
-    F300:UNIX_System_V:*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
-    F301:UNIX_System_V:*:*)
-       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
-       exit 0 ;;
-    hp3[0-9][05]:NetBSD:*:*)
-	echo m68k-hp-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:FreeBSD:*:*)
-	if test -x /usr/bin/objformat; then
-	    if test "elf" = "`/usr/bin/objformat`"; then
-		echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
-		exit 0
-	    fi
-	fi
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
-    *:NetBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
-    i*:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i386-pc-interix
-	exit 0 ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit 0 ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    *:GNU:*:*)
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
-    *:Linux:*:*)
-
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	ld_help_string=`cd /; ld --help 2>&1`
-	ld_supported_emulations=`echo $ld_help_string \
-			 | sed -ne '/supported emulations:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported emulations: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_emulations" in
-	  *ia64)
-		echo "${UNAME_MACHINE}-unknown-linux"
-		exit 0
-		;;
-	  i?86linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0
-		;;
-	  i?86coff)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0
-		;;
-	  sparclinux)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
-		exit 0
-		;;
-	  armlinux)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
-		exit 0
-		;;
-	  elf32arm*)
-		echo "${UNAME_MACHINE}-unknown-linux-gnu"
-		exit 0
-		;;
-	  armelf_linux*)
-		echo "${UNAME_MACHINE}-unknown-linux-gnu"
-		exit 0
-		;;
-	  m68klinux)
-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
-		exit 0
-		;;
-	  elf32ppc)
-		# Determine Lib Version
-		cat >$dummy.c <<EOF
-#include <features.h>
-#if defined(__GLIBC__)
-extern char __libc_version[];
-extern char __libc_release[];
-#endif
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#if defined(__GLIBC__)
-  printf("%s %s\n", __libc_version, __libc_release);
-#else
-  printf("unkown\n");
-#endif
-  return 0;
-}
-EOF
-		LIBC=""
-		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
-		if test "$?" = 0 ; then
-			./$dummy | grep 1\.99 > /dev/null
-			if test "$?" = 0 ; then
-				LIBC="libc1"
-			fi
-		fi	
-		rm -f $dummy.c $dummy
-		echo powerpc-unknown-linux-gnu${LIBC}
-		exit 0
-		;;
-	esac
-
-	if test "${UNAME_MACHINE}" = "alpha" ; then
-		sed 's/^	//'  <<EOF >$dummy.s
-		.globl main
-		.ent main
-	main:
-		.frame \$30,0,\$26,0
-		.prologue 0
-		.long 0x47e03d80 # implver $0
-		lda \$2,259
-		.long 0x47e20c21 # amask $2,$1
-		srl \$1,8,\$2
-		sll \$2,2,\$2
-		sll \$0,3,\$0
-		addl \$1,\$0,\$0
-		addl \$2,\$0,\$0
-		ret \$31,(\$26),1
-		.end main
-EOF
-		LIBC=""
-		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-		if test "$?" = 0 ; then
-			./$dummy
-			case "$?" in
-			7)
-				UNAME_MACHINE="alpha"
-				;;
-			15)
-				UNAME_MACHINE="alphaev5"
-				;;
-			14)
-				UNAME_MACHINE="alphaev56"
-				;;
-			10)
-				UNAME_MACHINE="alphapca56"
-				;;
-			16)
-				UNAME_MACHINE="alphaev6"
-				;;
-			esac
-
-			objdump --private-headers $dummy | \
-			  grep ld.so.1 > /dev/null
-			if test "$?" = 0 ; then
-				LIBC="libc1"
-			fi
-		fi
-		rm -f $dummy.s $dummy
-		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
-	elif test "${UNAME_MACHINE}" = "mips" ; then
-	  cat >$dummy.c <<EOF
-#ifdef __cplusplus
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __MIPSEB__
-  printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
-	  rm -f $dummy.c $dummy
-	else
-	  # Either a pre-BFD a.out linker (linux-gnuoldld)
-	  # or one that does not give us useful --help.
-	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	  # If ld does not provide *any* "supported emulations:"
-	  # that means it is gnuoldld.
-	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
-	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-
-	  case "${UNAME_MACHINE}" in
-	  i?86)
-	    VENDOR=pc;
-	    ;;
-	  *)
-	    VENDOR=unknown;
-	    ;;
-	  esac
-	  # Determine whether the default compiler is a.out or elf
-	  cat >$dummy.c <<EOF
-#include <features.h>
-#ifdef __cplusplus
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __ELF__
-# ifdef __GLIBC__
-#  if __GLIBC__ >= 2
-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-#  else
-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-#  endif
-# else
-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
-	  rm -f $dummy.c $dummy
-	fi ;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
-# are messed up and put the nodename in both sysname and nodename.
-    i?86:DYNIX/ptx:4*:*)
-	echo i386-sequent-sysv4
-	exit 0 ;;
-    i?86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
-    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit 0 ;;
-    i?86:*:5:7*)
-        # Fixed at (any) Pentium or better
-        UNAME_MACHINE=i586
-        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
-	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
-	else
-	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-	fi
-	exit 0 ;;
-    i?86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit 0 ;;
-    pc:*:*:*)
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit 0 ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit 0 ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit 0 ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit 0 ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit 0 ;;
-    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <Richard.M.Bartel@xxxxxxxxxxxxxxxxx>
-        echo i586-unisys-sysv4
-        exit 0 ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@xxxxxxxxxxxxxx>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
-    *:*:*:FTX*)
-	# From seanf@xxxxxxxxxxxxxxxxx
-	echo i860-stratus-sysv4
-	exit 0 ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
-    news*:NEWS-OS:*:6*)
-	echo mips-sony-newsos6
-	exit 0 ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit 0 ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit 0 ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit 0 ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit 0 ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
-    *:QNX:*:4*)
-	echo i386-qnx-qnx${UNAME_VERSION}
-	exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-#if !defined (ultrix)
-  printf ("vax-dec-bsd\n"); exit (0);
-#else
-  printf ("vax-dec-ultrix\n"); exit (0);
-#endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
-rm -f $dummy.c $dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit 0 ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit 0 ;;
-    c34*)
-	echo c34-convex-bsd
-	exit 0 ;;
-    c38*)
-	echo c38-convex-bsd
-	exit 0 ;;
-    c4*)
-	echo c4-convex-bsd
-	exit 0 ;;
-    esac
-fi
-
-#echo '(Unable to guess system type)' 1>&2
-
-exit 1
diff --git a/external/privoxy/pcre/config.h b/external/privoxy/pcre/config.h
deleted file mode 100644
index c767cbb..0000000
--- a/external/privoxy/pcre/config.h
+++ /dev/null
@@ -1,5 +0,0 @@
-
-/* For Privoxy, we just use Privoxy's config.h */
-
-#include "../config.h"
-
diff --git a/external/privoxy/pcre/config.in b/external/privoxy/pcre/config.in
deleted file mode 100644
index 02f4259..0000000
--- a/external/privoxy/pcre/config.in
+++ /dev/null
@@ -1,33 +0,0 @@
-
-/* On Unix systems config.in is converted by configure into config.h. PCRE is
-written in Standard C, but there are a few non-standard things it can cope
-with, allowing it to run on SunOS4 and other "close to standard" systems.
-
-On a non-Unix system you should just copy this file into config.h and change
-the definitions of HAVE_STRERROR and HAVE_MEMMOVE to 1. Unfortunately, because
-of the way autoconf works, these cannot be made the defaults. If your system
-has bcopy() and not memmove(), change the definition of HAVE_BCOPY instead of
-HAVE_MEMMOVE. If your system has neither bcopy() nor memmove(), leave them both
-as 0; an emulation function will be used. */
-
-/* Define to empty if the keyword does not work. */
-
-#undef const
-
-/* Define to `unsigned' if <stddef.h> doesn't define size_t. */
-
-#undef size_t
-
-/* The following two definitions are mainly for the benefit of SunOS4, which
-doesn't have the strerror() or memmove() functions that should be present in
-all Standard C libraries. The macros HAVE_STRERROR and HAVE_MEMMOVE should
-normally be defined with the value 1 for other systems, but unfortunately we
-can't make this the default because "configure" files generated by autoconf
-will only change 0 to 1; they won't change 1 to 0 if the functions are not
-found. If HAVE_MEMMOVE is set to 1, the value of HAVE_BCOPY is not relevant. */
-
-#define HAVE_STRERROR 0
-#define HAVE_MEMMOVE  0
-#define HAVE_BCOPY    0
-
-/* End */
diff --git a/external/privoxy/pcre/config.sub b/external/privoxy/pcre/config.sub
deleted file mode 100644
index 28426bb..0000000
--- a/external/privoxy/pcre/config.sub
+++ /dev/null
@@ -1,1232 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc.
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-if [ x$1 = x ]
-then
-	echo Configuration name missing. 1>&2
-	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
-	echo "or     $0 ALIAS" 1>&2
-	echo where ALIAS is a recognized configuration type. 1>&2
-	exit 1
-fi
-
-# First pass through any local machine types.
-case $1 in
-	*local*)
-		echo $1
-		exit 0
-		;;
-	*)
-	;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  linux-gnu*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple)
-		os=
-		basic_machine=$1
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
-		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
-		| 580 | i960 | h8300 \
-		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
-		| alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
-		| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
-		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
-		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
-		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-		| mips64vr5000 | miprs64vr5000el | mcore \
-		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
-		| thumb | d10v | fr30)
-		basic_machine=$basic_machine-unknown
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i[34567]86)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	# FIXME: clean up the formatting here.
-	vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
-	      | xmp-* | ymp-* \
-	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
-	      | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
-	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
-	      | clipper-* | orion-* \
-	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-* \
-	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-	      | mipstx39-* | mipstx39el-* | mcore-* \
-	      | f301-* | armv*-* | t3e-* \
-	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* )
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-cbm
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-cbm
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-cbm
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	cray2)
-		basic_machine=cray2-cray
-		os=-unicos
-		;;
-	[ctj]90-cray)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[34567]86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i[34567]86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i[34567]86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i[34567]86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	i386-go32 | go32)
-		basic_machine=i386-unknown
-		os=-go32
-		;;
-	i386-mingw32 | mingw32)
-		basic_machine=i386-unknown
-		os=-mingw32
-		;;
-	i386-qnx | qnx)
-		basic_machine=i386-qnx
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mipsel*-linux*)
-		basic_machine=mipsel-unknown
-		os=-linux-gnu
-		;;
-	mips*-linux*)
-		basic_machine=mips-unknown
-		os=-linux-gnu
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	msdos)
-		basic_machine=i386-unknown
-		os=-msdos
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-        pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pentium | p5 | k5 | k6 | nexen)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexen-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=rs6000-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-	        ;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-	        ;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sparclite-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=t3e-cray
-		os=-unicos
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-               basic_machine=f301-fujitsu
-               ;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xmp)
-		basic_machine=xmp-cray
-		os=-unicos
-		;;
-        xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	mips)
-		if [ x$os = x-linux-gnu ]; then
-			basic_machine=mips-unknown
-		else
-			basic_machine=mips-mips
-		fi
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sparc | sparcv9)
-		basic_machine=sparc-sun
-		;;
-        cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	c4x*)
-		basic_machine=c4x-none
-		os=-coff
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
-	      | -macos* | -mpw* | -magic* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-ns2 )
-	        os=-nextstep2
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-        -qnx)
-		os=-qnx4
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-        -*mint | -*MiNT)
-	        os=-mint
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-        pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-        *-gould)
-		os=-sysv
-		;;
-        *-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-        *-sgi)
-		os=-irix
-		;;
-        *-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f301-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-vxsim* | -vxworks*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -*MiNT)
-				vendor=atari
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
diff --git a/external/privoxy/pcre/configure b/external/privoxy/pcre/configure
deleted file mode 100644
index fbd3831..0000000
--- a/external/privoxy/pcre/configure
+++ /dev/null
@@ -1,1568 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --disable-shared        build PCRE as a static library"
-ac_help="$ac_help
-  --enable-utf8           enable UTF8 support (incomplete)"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # The list generated by autoconf has been trimmed to remove many
-    # options that are totally irrelevant to PCRE (e.g. relating to X),
-    # or are not supported by its Makefile.
-    # The list generated by autoconf has been trimmed to remove many
-    # options that are totally irrelevant to PCRE (e.g. relating to X),
-    # or are not supported by its Makefile.
-    # The list generated by autoconf has been trimmed to remove many
-    # options that are totally irrelevant to PCRE (e.g. relating to X),
-    # or are not supported by its Makefile.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: ./configure [options]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-EOF
-    cat << EOF
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=dftables.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@xxxxxxxxxxxxxxxxx
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-
-
-
-PCRE_MAJOR=3
-PCRE_MINOR=4
-PCRE_DATE=22-Aug-2000
-PCRE_VERSION=${PCRE_MAJOR}.${PCRE_MINOR}
-
-
-PCRE_LIB_VERSION=0:1:0
-PCRE_POSIXLIB_VERSION=0:0:0
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:546: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:576: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:627: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:659: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 670 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:701: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:706: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:734: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:768: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:798: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 813 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 830 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 847 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:878: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 883 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:891: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  ac_cv_header_stdc=yes
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 908 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 926 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
-  :
-else
-  cat > conftest.$ac_ext <<EOF
-#line 947 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  :
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
-  cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-for ac_hdr in limits.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:985: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 990 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1024: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1029 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1078: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_c_const=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
-
-fi
-
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1099: checking for size_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1104 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_size_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_size_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_size_t" 1>&6
-if test $ac_cv_type_size_t = no; then
-  cat >> confdefs.h <<\EOF
-#define size_t unsigned
-EOF
-
-fi
-
-
-
-for ac_func in bcopy memmove strerror
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1136: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1141 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-
-
-LIBTOOL=./libtool
-LIBSUFFIX=la
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  if test "$enableval" = "no"; then
-  LIBTOOL=
-  LIBSUFFIX=a
-fi
-
-fi
-
-
-
-# Check whether --enable-utf8 or --disable-utf8 was given.
-if test "${enable_utf8+set}" = set; then
-  enableval="$enable_utf8"
-  if test "$enableval" = "yes"; then
-  UTF8=-DSUPPORT_UTF8
-fi
-
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-
-trap 'rm -fr `echo "Makefile pcre.h:pcre.in pcre-config:pcre-config.in RunTest:RunTest.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@RANLIB@%$RANLIB%g
-s%@CPP@%$CPP%g
-s%@HAVE_MEMMOVE@%$HAVE_MEMMOVE%g
-s%@HAVE_STRERROR@%$HAVE_STRERROR%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@LIBSUFFIX@%$LIBSUFFIX%g
-s%@UTF8@%$UTF8%g
-s%@PCRE_MAJOR@%$PCRE_MAJOR%g
-s%@PCRE_MINOR@%$PCRE_MINOR%g
-s%@PCRE_DATE@%$PCRE_DATE%g
-s%@PCRE_VERSION@%$PCRE_VERSION%g
-s%@PCRE_LIB_VERSION@%$PCRE_LIB_VERSION%g
-s%@PCRE_POSIXLIB_VERSION@%$PCRE_POSIXLIB_VERSION%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile pcre.h:pcre.in pcre-config:pcre-config.in RunTest:RunTest.in"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="config.h:config.in"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-chmod a+x RunTest pcre-config
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/external/privoxy/pcre/configure.in b/external/privoxy/pcre/configure.in
deleted file mode 100644
index c98387d..0000000
--- a/external/privoxy/pcre/configure.in
+++ /dev/null
@@ -1,85 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-
-dnl This is required at the start; the name is the name of a file
-dnl it should be seeing, to verify it is in the same directory.
-
-AC_INIT(dftables.c)
-
-dnl Arrange to build config.h from config.in. Note that pcre.h is
-dnl built differently, as it is just a "substitution" file.
-dnl Manual says this macro should come right after AC_INIT.
-AC_CONFIG_HEADER(config.h:config.in)
-
-dnl Provide the current PCRE version information. Do not use numbers
-dnl with leading zeros for the minor version, as they end up in a C
-dnl macro, and may be treated as octal constants. Stick to single
-dnl digits for minor numbers less than 10. There are unlikely to be
-dnl that many releases anyway.
-
-PCRE_MAJOR=3
-PCRE_MINOR=4
-PCRE_DATE=22-Aug-2000
-PCRE_VERSION=${PCRE_MAJOR}.${PCRE_MINOR}
-
-dnl Provide versioning information for libtool shared libraries that
-dnl are built by default on Unix systems.
-
-PCRE_LIB_VERSION=0:1:0
-PCRE_POSIXLIB_VERSION=0:0:0
-
-dnl Checks for programs.
-
-AC_PROG_CC
-AC_PROG_RANLIB
-
-dnl Checks for header files.
-
-AC_HEADER_STDC
-AC_CHECK_HEADERS(limits.h)
-
-dnl Checks for typedefs, structures, and compiler characteristics.
-
-AC_C_CONST
-AC_TYPE_SIZE_T
-
-dnl Checks for library functions.
-
-AC_CHECK_FUNCS(bcopy memmove strerror)
-
-dnl Handle --enable-shared-libraries
-
-LIBTOOL=./libtool
-LIBSUFFIX=la
-AC_ARG_ENABLE(shared,
-[  --disable-shared        build PCRE as a static library],
-if test "$enableval" = "no"; then
-  LIBTOOL=
-  LIBSUFFIX=a
-fi
-)
-
-dnl Handle --enable-utf8
-
-AC_ARG_ENABLE(utf8,
-[  --enable-utf8           enable UTF8 support (incomplete)],
-if test "$enableval" = "yes"; then
-  UTF8=-DSUPPORT_UTF8
-fi
-)
-
-dnl "Export" these variables
-
-AC_SUBST(HAVE_MEMMOVE)
-AC_SUBST(HAVE_STRERROR)
-AC_SUBST(LIBTOOL)
-AC_SUBST(LIBSUFFIX)
-AC_SUBST(UTF8)
-AC_SUBST(PCRE_MAJOR)
-AC_SUBST(PCRE_MINOR)
-AC_SUBST(PCRE_DATE)
-AC_SUBST(PCRE_VERSION)
-AC_SUBST(PCRE_LIB_VERSION)
-AC_SUBST(PCRE_POSIXLIB_VERSION)
-
-dnl This must be last; it determines what files are written
-AC_OUTPUT(Makefile pcre.h:pcre.in pcre-config:pcre-config.in RunTest:RunTest.in,[chmod a+x RunTest pcre-config])
diff --git a/external/privoxy/pcre/dftables b/external/privoxy/pcre/dftables
deleted file mode 100755
index 0e680da..0000000
Binary files a/external/privoxy/pcre/dftables and /dev/null differ
diff --git a/external/privoxy/pcre/dftables.c b/external/privoxy/pcre/dftables.c
deleted file mode 100644
index d572dfd..0000000
--- a/external/privoxy/pcre/dftables.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/*
-PCRE is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-
-See the file Tech.Notes for some information on the internals.
-*/
-
-
-/* This is a support program to generate the file chartables.c, containing
-character tables of various kinds. They are built according to the default C
-locale and used as the default tables by PCRE. Now that pcre_maketables is
-a function visible to the outside world, we make use of its code from here in
-order to be consistent. */
-
-#include <ctype.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "internal.h"
-
-#define DFTABLES          /* maketables.c notices this */
-#include "maketables.c"
-
-
-int main(void)
-{
-int i;
-unsigned const char *tables = pcre_maketables();
-
-printf(
-  "/*************************************************\n"
-  "*      Perl-Compatible Regular Expressions       *\n"
-  "*************************************************/\n\n"
-  "/* This file is automatically written by the dftables auxiliary \n"
-  "program. If you edit it by hand, you might like to edit the Makefile to \n"
-  "prevent its ever being regenerated.\n\n"
-  "This file is #included in the compilation of pcre.c to build the default\n"
-  "character tables which are used when no tables are passed to the compile\n"
-  "function. */\n\n"
-  "static unsigned char pcre_default_tables[] = {\n\n"
-  "/* This table is a lower casing table. */\n\n");
-
-printf("  ");
-for (i = 0; i < 256; i++)
-  {
-  if ((i & 7) == 0 && i != 0) printf("\n  ");
-  printf("%3d", *tables++);
-  if (i != 255) printf(",");
-  }
-printf(",\n\n");
-
-printf("/* This table is a case flipping table. */\n\n");
-
-printf("  ");
-for (i = 0; i < 256; i++)
-  {
-  if ((i & 7) == 0 && i != 0) printf("\n  ");
-  printf("%3d", *tables++);
-  if (i != 255) printf(",");
-  }
-printf(",\n\n");
-
-printf(
-  "/* This table contains bit maps for various character classes.\n"
-  "Each map is 32 bytes long and the bits run from the least\n"
-  "significant end of each byte. The classes that have their own\n"
-  "maps are: space, xdigit, digit, upper, lower, word, graph\n"
-  "print, punct, and cntrl. Other classes are built from combinations. */\n\n");
-
-printf("  ");
-for (i = 0; i < cbit_length; i++)
-  {
-  if ((i & 7) == 0 && i != 0)
-    {
-    if ((i & 31) == 0) printf("\n");
-    printf("\n  ");
-    }
-  printf("0x%02x", *tables++);
-  if (i != cbit_length - 1) printf(",");
-  }
-printf(",\n\n");
-
-printf(
-  "/* This table identifies various classes of character by individual bits:\n"
-  "  0x%02x   white space character\n"
-  "  0x%02x   letter\n"
-  "  0x%02x   decimal digit\n"
-  "  0x%02x   hexadecimal digit\n"
-  "  0x%02x   alphanumeric or '_'\n"
-  "  0x%02x   regular expression metacharacter or binary zero\n*/\n\n",
-  ctype_space, ctype_letter, ctype_digit, ctype_xdigit, ctype_word,
-  ctype_meta);
-
-printf("  ");
-for (i = 0; i < 256; i++)
-  {
-  if ((i & 7) == 0 && i != 0)
-    {
-    printf(" /* ");
-    if (isprint(i-8)) printf(" %c -", i-8);
-      else printf("%3d-", i-8);
-    if (isprint(i-1)) printf(" %c ", i-1);
-      else printf("%3d", i-1);
-    printf(" */\n  ");
-    }
-  printf("0x%02x", *tables++);
-  if (i != 255) printf(",");
-  }
-
-printf("};/* ");
-if (isprint(i-8)) printf(" %c -", i-8);
-  else printf("%3d-", i-8);
-if (isprint(i-1)) printf(" %c ", i-1);
-  else printf("%3d", i-1);
-printf(" */\n\n/* End of chartables.c */\n");
-
-return 0;
-}
-
-/* End of dftables.c */
diff --git a/external/privoxy/pcre/dll.mk b/external/privoxy/pcre/dll.mk
deleted file mode 100644
index d8b728e..0000000
--- a/external/privoxy/pcre/dll.mk
+++ /dev/null
@@ -1,60 +0,0 @@
-# dll.mk - auxilary Makefile to easy build dll's for mingw32 target
-# ver. 0.6 of 1999-03-25
-#
-# Homepage of this makefile - http://www.is.lg.ua/~paul/devel/
-# Homepage of original mingw32 project -
-#		      http://www.fu.is.saga-u.ac.jp/~colin/gcc.html
-#
-# How to use:
-# This makefile can:
-# 1. Create automatical .def file from list of objects
-# 2. Create .dll from objects and .def file, either automatical, or your
-#    hand-written (maybe) file, which must have same basename as dll
-# WARNING! There MUST be object, which name match dll's name. Make sux.
-# 3. Create import library from .def (as for .dll, only its name required,
-#    not dll itself)
-#    By convention implibs for dll have .dll.a suffix, e.g. libstuff.dll.a
-#    Why not just libstuff.a? 'Cos that's name for static lib, ok?
-# Process divided into 3 phases because:
-# 1. Pre-existent .def possible
-# 2. Generating implib is enough time-consuming
-#
-# Variables:
-#   DLL_LDLIBS  - libs for linking dll
-#   DLL_LDFLAGS - flags for linking dll
-#
-# By using $(DLL_SUFFIX) instead of 'dll', e.g. stuff.$(DLL_SUFFIX)
-# you may help porting makefiles to other platforms
-#
-# Put this file in your make's include path (e.g. main include dir, for
-# more information see include section in make doc). Put in the beginning
-# of your own Makefile line "include dll.mk". Specify dependences, e.g.:
-#
-# Do all stuff in one step
-# libstuff.dll.a: $(OBJECTS) stuff.def
-# stuff.def: $(OBJECTS)
-#
-# Steps separated, pre-provided .def, link with user32
-#
-# DLL_LDLIBS=-luser32
-# stuff.dll: $(OBJECTS)
-# libstuff.dll.a: $(OBJECTS)
-
-
-DLLWRAP=dllwrap
-DLLTOOL=dlltool
-
-DLL_SUFFIX=dll
-
-.SUFFIXES: .o .$(DLL_SUFFIX)
-
-_%.def: %.o
-      $(DLLTOOL) --export-all --output-def $@ $^
-
-%.$(DLL_SUFFIX): %.o
-      $(DLLWRAP) --dllname $(notdir $@) --driver-name $(CC) --def $*.def -o $@ $(filter %.o,$^) $(DLL_LDFLAGS) $(DLL_LDLIBS)
-
-lib%.$(DLL_SUFFIX).a:%.def
-      $(DLLTOOL) --dllname $(notdir $*.dll) --def $< --output-lib $@
-
-# End
diff --git a/external/privoxy/pcre/doc/ChangeLog b/external/privoxy/pcre/doc/ChangeLog
deleted file mode 100644
index 2133dd7..0000000
--- a/external/privoxy/pcre/doc/ChangeLog
+++ /dev/null
@@ -1,655 +0,0 @@
-ChangeLog for PCRE
-------------------
-
-
-Version 3.4 22-Aug-00
----------------------
-
-1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *.
-
-2. Diagnose condition (?(0) as an error instead of crashing on matching.
-
-
-Version 3.3 01-Aug-00
----------------------
-
-1. If an octal character was given, but the value was greater than \377, it
-was not getting masked to the least significant bits, as documented. This could
-lead to crashes in some systems.
-
-2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats
-the hyphen as a literal. PCRE used to give an error; it now behaves like Perl.
-
-3. Added the functions pcre_free_substring() and pcre_free_substring_list().
-These just pass their arguments on to (pcre_free)(), but they are provided
-because some uses of PCRE bind it to non-C systems that can call its functions,
-but cannot call free() or pcre_free() directly.
-
-4. Add "make test" as a synonym for "make check". Corrected some comments in
-the Makefile.
-
-5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the
-Makefile.
-
-6. Changed the name of pgrep to pcregrep, because Solaris has introduced a
-command called pgrep for grepping around the active processes.
-
-7. Added the beginnings of support for UTF-8 character strings.
-
-8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and
-RANLIB to ./ltconfig so that they are used by libtool. I think these are all
-the relevant ones. (AR is not passed because ./ltconfig does its own figuring
-out for the ar command.)
-
-
-Version 3.2 12-May-00
----------------------
-
-This is purely a bug fixing release.
-
-1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead
-of ZA. This was just one example of several cases that could provoke this bug,
-which was introduced by change 9 of version 2.00. The code for breaking
-infinite loops after an iteration that matches an empty string was't working
-correctly.
-
-2. The pcretest program was not imitating Perl correctly for the pattern /a*/g
-when matched against abbab (for example). After matching an empty string, it
-wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this
-caused it to match further down the string than it should.
-
-3. The code contained an inclusion of sys/types.h. It isn't clear why this
-was there because it doesn't seem to be needed, and it causes trouble on some
-systems, as it is not a Standard C header. It has been removed.
-
-4. Made 4 silly changes to the source to avoid stupid compiler warnings that
-were reported on the Macintosh. The changes were from
-
-  while ((c = *(++ptr)) != 0 && c != '\n');
-to
-  while ((c = *(++ptr)) != 0 && c != '\n') ;
-
-Totally extraordinary, but if that's what it takes...
-
-5. PCRE is being used in one environment where neither memmove() nor bcopy() is
-available. Added HAVE_BCOPY and an autoconf test for it; if neither
-HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which
-assumes the way PCRE uses memmove() (always moving upwards).
-
-6. PCRE is being used in one environment where strchr() is not available. There
-was only one use in pcre.c, and writing it out to avoid strchr() probably gives
-faster code anyway.
-
-
-Version 3.1 09-Feb-00
----------------------
-
-The only change in this release is the fixing of some bugs in Makefile.in for
-the "install" target:
-
-(1) It was failing to install pcreposix.h.
-
-(2) It was overwriting the pcre.3 man page with the pcreposix.3 man page.
-
-
-Version 3.0 01-Feb-00
----------------------
-
-1. Add support for the /+ modifier to perltest (to output $` like it does in
-pcretest).
-
-2. Add support for the /g modifier to perltest.
-
-3. Fix pcretest so that it behaves even more like Perl for /g when the pattern
-matches null strings.
-
-4. Fix perltest so that it doesn't do unwanted things when fed an empty
-pattern. Perl treats empty patterns specially - it reuses the most recent
-pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this
-effect.
-
-5. The POSIX interface was broken in that it was just handing over the POSIX
-captured string vector to pcre_exec(), but (since release 2.00) PCRE has
-required a bigger vector, with some working space on the end. This means that
-the POSIX wrapper now has to get and free some memory, and copy the results.
-
-6. Added some simple autoconf support, placing the test data and the
-documentation in separate directories, re-organizing some of the
-information files, and making it build pcre-config (a GNU standard). Also added
-libtool support for building PCRE as a shared library, which is now the
-default.
-
-7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and
-09 are not valid octal constants. Single digits will be used for minor values
-less than 10.
-
-8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that
-existing programs that set these in the POSIX interface can use PCRE without
-modification.
-
-9. Added a new function, pcre_fullinfo() with an extensible interface. It can
-return all that pcre_info() returns, plus additional data. The pcre_info()
-function is retained for compatibility, but is considered to be obsolete.
-
-10. Added experimental recursion feature (?R) to handle one common case that
-Perl 5.6 will be able to do with (?p{...}).
-
-11. Added support for POSIX character classes like [:alpha:], which Perl is
-adopting.
-
-
-Version 2.08 31-Aug-99
-----------------------
-
-1. When startoffset was not zero and the pattern began with ".*", PCRE was not
-trying to match at the startoffset position, but instead was moving forward to
-the next newline as if a previous match had failed.
-
-2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G,
-and could get into a loop if a null string was matched other than at the start
-of the subject.
-
-3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can
-be distinguished at compile time, and for completeness also added PCRE_DATE.
-
-5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL
-in GnuWin32 environments.
-
-
-Version 2.07 29-Jul-99
-----------------------
-
-1. The documentation is now supplied in plain text form and HTML as well as in
-the form of man page sources.
-
-2. C++ compilers don't like assigning (void *) values to other pointer types.
-In particular this affects malloc(). Although there is no problem in Standard
-C, I've put in casts to keep C++ compilers happy.
-
-3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call
-should be (const char *).
-
-4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may
-be useful for non-Unix systems who don't want to bother with the POSIX stuff.
-However, I haven't made this a standard facility. The documentation doesn't
-mention it, and the Makefile doesn't support it.
-
-5. The Makefile now contains an "install" target, with editable destinations at
-the top of the file. The pcretest program is not installed.
-
-6. pgrep -V now gives the PCRE version number and date.
-
-7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was
-causing the entire string to be ignored, instead of just the last character.
-
-8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a
-non-matching string, it can take a very, very long time, even for strings of
-quite modest length, because of the nested recursion. PCRE now does better in
-some of these cases. It does this by remembering the last required literal
-character in the pattern, and pre-searching the subject to ensure it is present
-before running the real match. In other words, it applies a heuristic to detect
-some types of certain failure quickly, and in the above example, if presented
-with a string that has no trailing " it gives "no match" very quickly.
-
-9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored;
-other alternatives are tried instead.
-
-
-Version 2.06 09-Jun-99
-----------------------
-
-1. Change pcretest's output for amount of store used to show just the code
-space, because the remainder (the data block) varies in size between 32-bit and
-64-bit systems.
-
-2. Added an extra argument to pcre_exec() to supply an offset in the subject to
-start matching at. This allows lookbehinds to work when searching for multiple
-occurrences in a string.
-
-3. Added additional options to pcretest for testing multiple occurrences:
-
-   /+   outputs the rest of the string that follows a match
-   /g   loops for multiple occurrences, using the new startoffset argument
-   /G   loops for multiple occurrences by passing an incremented pointer
-
-4. PCRE wasn't doing the "first character" optimization for patterns starting
-with \b or \B, though it was doing it for other lookbehind assertions. That is,
-it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with
-the letter 'x'. On long subject strings, this gives a significant speed-up.
-
-
-Version 2.05 21-Apr-99
-----------------------
-
-1. Changed the type of magic_number from int to long int so that it works
-properly on 16-bit systems.
-
-2. Fixed a bug which caused patterns starting with .* not to work correctly
-when the subject string contained newline characters. PCRE was assuming
-anchoring for such patterns in all cases, which is not correct because .* will
-not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
-DOTALL is set at top level; otherwise it knows that patterns starting with .*
-must be retried after every newline in the subject.
-
-
-Version 2.04 18-Feb-99
-----------------------
-
-1. For parenthesized subpatterns with repeats whose minimum was zero, the
-computation of the store needed to hold the pattern was incorrect (too large).
-If such patterns were nested a few deep, this could multiply and become a real
-problem.
-
-2. Added /M option to pcretest to show the memory requirement of a specific
-pattern. Made -m a synonym of -s (which does this globally) for compatibility.
-
-3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
-compiled in such a way that the backtracking after subsequent failure was
-pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
-((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
-
-
-Version 2.03 02-Feb-99
-----------------------
-
-1. Fixed typo and small mistake in man page.
-
-2. Added 4th condition (GPL supersedes if conflict) and created separate
-LICENCE file containing the conditions.
-
-3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
-Perl, that is the internal \ allows the delimiter to be included in the
-pattern. Locked out the use of \ as a delimiter. If \ immediately follows
-the final delimiter, add \ to the end of the pattern (to test the error).
-
-4. Added the convenience functions for extracting substrings after a successful
-match. Updated pcretest to make it able to test these functions.
-
-
-Version 2.02 14-Jan-99
-----------------------
-
-1. Initialized the working variables associated with each extraction so that
-their saving and restoring doesn't refer to uninitialized store.
-
-2. Put dummy code into study.c in order to trick the optimizer of the IBM C
-compiler for OS/2 into generating correct code. Apparently IBM isn't going to
-fix the problem.
-
-3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
-calls, and wasn't printing the correct value for compiling calls. Increased the
-default value of LOOPREPEAT, and the number of significant figures in the
-times.
-
-4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
-
-5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
-a building problem on Windows NT with a FAT file system.
-
-
-Version 2.01 21-Oct-98
-----------------------
-
-1. Changed the API for pcre_compile() to allow for the provision of a pointer
-to character tables built by pcre_maketables() in the current locale. If NULL
-is passed, the default tables are used.
-
-
-Version 2.00 24-Sep-98
-----------------------
-
-1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
-it any more.
-
-2. Allow quantification of (?>) groups, and make it work correctly.
-
-3. The first character computation wasn't working for (?>) groups.
-
-4. Correct the implementation of \Z (it is permitted to match on the \n at the
-end of the subject) and add 5.005's \z, which really does match only at the
-very end of the subject.
-
-5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
-
-6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
-DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
-localized options. All options to pcre_study() were also removed.
-
-7. Add other new features from 5.005:
-
-   $(?<=           positive lookbehind
-   $(?<!           negative lookbehind
-   (?imsx-imsx)    added the unsetting capability
-                   such a setting is global if at outer level; local otherwise
-   (?imsx-imsx:)   non-capturing groups with option setting
-   (?(cond)re|re)  conditional pattern matching
-
-   A backreference to itself in a repeated group matches the previous
-   captured string.
-
-8. General tidying up of studying (both automatic and via "study")
-consequential on the addition of new assertions.
-
-9. As in 5.005, unlimited repeated groups that could match an empty substring
-are no longer faulted at compile time. Instead, the loop is forcibly broken at
-runtime if any iteration does actually match an empty substring.
-
-10. Include the RunTest script in the distribution.
-
-11. Added tests from the Perl 5.005_02 distribution. This showed up a few
-discrepancies, some of which were old and were also with respect to 5.004. They
-have now been fixed.
-
-
-Version 1.09 28-Apr-98
-----------------------
-
-1. A negated single character class followed by a quantifier with a minimum
-value of one (e.g.  [^x]{1,6}  ) was not compiled correctly. This could lead to
-program crashes, or just wrong answers. This did not apply to negated classes
-containing more than one character, or to minima other than one.
-
-
-Version 1.08 27-Mar-98
-----------------------
-
-1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
-
-2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
-latter must appear before anything that relies on it in the pattern.
-
-
-Version 1.07 16-Feb-98
-----------------------
-
-1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
-repeat of a potentially empty string).
-
-
-Version 1.06 23-Jan-98
-----------------------
-
-1. Added Markus Oberhumer's little patches for C++.
-
-2. Literal strings longer than 255 characters were broken.
-
-
-Version 1.05 23-Dec-97
-----------------------
-
-1. Negated character classes containing more than one character were failing if
-PCRE_CASELESS was set at run time.
-
-
-Version 1.04 19-Dec-97
-----------------------
-
-1. Corrected the man page, where some "const" qualifiers had been omitted.
-
-2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
-input syntax.
-
-3. Fixed memory leak which occurred when a regex with back references was
-matched with an offsets vector that wasn't big enough. The temporary memory
-that is used in this case wasn't being freed if the match failed.
-
-4. Tidied pcretest to ensure it frees memory that it gets.
-
-5. Temporary memory was being obtained in the case where the passed offsets
-vector was exactly big enough.
-
-6. Corrected definition of offsetof() from change 5 below.
-
-7. I had screwed up change 6 below and broken the rules for the use of
-setjmp(). Now fixed.
-
-
-Version 1.03 18-Dec-97
-----------------------
-
-1. A erroneous regex with a missing opening parenthesis was correctly
-diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
-on some systems.
-
-2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
-it was reported that one broken compiler failed on the former because "code" is
-also an independent variable.
-
-3. The erroneous regex a[]b caused an array overrun reference.
-
-4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
-fail on data ending with that character. (It was going on too far, and checking
-the next character, typically a binary zero.) This was specific to the
-optimized code for single-character negative classes.
-
-5. Added a contributed patch from the TIN world which does the following:
-
-  + Add an undef for memmove, in case the the system defines a macro for it.
-
-  + Add a definition of offsetof(), in case there isn't one. (I don't know
-    the reason behind this - offsetof() is part of the ANSI standard - but
-    it does no harm).
-
-  + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
-    most of the places where whitespace preceded '#'. I have given up and
-    allowed the remaining 2 cases to be at the margin.
-
-  + Rename some variables in pcre to eliminate shadowing. This seems very
-    pedantic, but does no harm, of course.
-
-6. Moved the call to setjmp() into its own function, to get rid of warnings
-from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
-
-7. Constructs such as \d{8,} were compiling into the equivalent of
-\d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
-outcome, but in this particular case used more store than had been allocated,
-which caused the bug to be discovered because it threw up an internal error.
-
-8. The debugging code in both pcre and pcretest for outputting the compiled
-form of a regex was going wrong in the case of back references followed by
-curly-bracketed repeats.
-
-
-Version 1.02 12-Dec-97
-----------------------
-
-1. Typos in pcre.3 and comments in the source fixed.
-
-2. Applied a contributed patch to get rid of places where it used to remove
-'const' from variables, and fixed some signed/unsigned and uninitialized
-variable warnings.
-
-3. Added the "runtest" target to Makefile.
-
-4. Set default compiler flag to -O2 rather than just -O.
-
-
-Version 1.01 19-Nov-97
-----------------------
-
-1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
-like /([ab]*)*/, that is, for classes with more than one character in them.
-
-2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
-as /((?>a*))*/ (a PCRE_EXTRA facility).
-
-
-Version 1.00 18-Nov-97
-----------------------
-
-1. Added compile-time macros to support systems such as SunOS4 which don't have
-memmove() or strerror() but have other things that can be used instead.
-
-2. Arranged that "make clean" removes the executables.
-
-
-Version 0.99 27-Oct-97
-----------------------
-
-1. Fixed bug in code for optimizing classes with only one character. It was
-initializing a 32-byte map regardless, which could cause it to run off the end
-of the memory it had got.
-
-2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
-
-
-Version 0.98 22-Oct-97
-----------------------
-
-1. Fixed bug in code for handling temporary memory usage when there are more
-back references than supplied space in the ovector. This could cause segfaults.
-
-
-Version 0.97 21-Oct-97
-----------------------
-
-1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
-
-2. Optimized negated single characters not to use a bit map.
-
-3. Brought error texts together as macro definitions; clarified some of them;
-fixed one that was wrong - it said "range out of order" when it meant "invalid
-escape sequence".
-
-4. Changed some char * arguments to const char *.
-
-5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
-
-6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
-pcretest.
-
-
-Version 0.96 16-Oct-97
-----------------------
-
-1. Added a simple "pgrep" utility to the distribution.
-
-2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
-unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
-where "ddd" means "one or more decimal digits".
-
-3. Fixed serious bug. If a pattern had a back reference, but the call to
-pcre_exec() didn't supply a large enough ovector to record the related
-identifying subpattern, the match always failed. PCRE now remembers the number
-of the largest back reference, and gets some temporary memory in which to save
-the offsets during matching if necessary, in order to ensure that
-backreferences always work.
-
-4. Increased the compatibility with Perl in a number of ways:
-
-  (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
-      to request this handling. The option can be set at compile or exec time.
-
-  (b) $ matches before a terminating newline by default; an option
-      PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
-      mode). The option can be set at compile or exec time.
-
-  (c) The handling of \ followed by a digit other than 0 is now supposed to be
-      the same as Perl's. If the decimal number it represents is less than 10
-      or there aren't that many previous left capturing parentheses, an octal
-      escape is read. Inside a character class, it's always an octal escape,
-      even if it is a single digit.
-
-  (d) An escaped but undefined alphabetic character is taken as a literal,
-      unless PCRE_EXTRA is set. Currently this just reserves the remaining
-      escapes.
-
-  (e) {0} is now permitted. (The previous item is removed from the compiled
-      pattern).
-
-5. Changed all the names of code files so that the basic parts are no longer
-than 10 characters, and abolished the teeny "globals.c" file.
-
-6. Changed the handling of character classes; they are now done with a 32-byte
-bit map always.
-
-7. Added the -d and /D options to pcretest to make it possible to look at the
-internals of compilation without having to recompile pcre.
-
-
-Version 0.95 23-Sep-97
-----------------------
-
-1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
-\x20 at the start of a run of normal characters. These were being treated as
-real characters, instead of the source characters being re-checked.
-
-
-Version 0.94 18-Sep-97
-----------------------
-
-1. The functions are now thread-safe, with the caveat that the global variables
-containing pointers to malloc() and free() or alternative functions are the
-same for all threads.
-
-2. Get pcre_study() to generate a bitmap of initial characters for non-
-anchored patterns when this is possible, and use it if passed to pcre_exec().
-
-
-Version 0.93 15-Sep-97
-----------------------
-
-1. /(b)|(:+)/ was computing an incorrect first character.
-
-2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
-but not actually doing anything yet.
-
-3. Treat "-" characters in classes that cannot be part of ranges as literals,
-as Perl does (e.g. [-az] or [az-]).
-
-4. Set the anchored flag if a branch starts with .* or .*? because that tests
-all possible positions.
-
-5. Split up into different modules to avoid including unneeded functions in a
-compiled binary. However, compile and exec are still in one module. The "study"
-function is split off.
-
-6. The character tables are now in a separate module whose source is generated
-by an auxiliary program - but can then be edited by hand if required. There are
-now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
-toupper() in the code.
-
-7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
-make them global. Abolish the function for setting them, as the caller can now
-set them directly.
-
-
-Version 0.92 11-Sep-97
-----------------------
-
-1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
-(e.g. /a{1,3}/) was broken (I mis-optimized it).
-
-2. Caseless matching was not working in character classes if the characters in
-the pattern were in upper case.
-
-3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
-
-4. Make PCRE_ANCHORED public and accept as a compile option.
-
-5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
-PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
-pass them.
-
-6. Give an error if bad option bits passed at compile or run time.
-
-7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
-pcretest to cause it to pass that flag.
-
-8. Add pcre_info(), to get the number of identifying subpatterns, the stored
-options, and the first character, if set.
-
-9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
-
-
-Version 0.91 10-Sep-97
-----------------------
-
-1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
-match the empty string as in /(a*)*/. It was looping and ultimately crashing.
-
-2. PCRE was looping on encountering an indefinitely repeated back reference to
-a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
-Perl does - treats the match as successful.
-
-****
diff --git a/external/privoxy/pcre/doc/NON-UNIX-USE b/external/privoxy/pcre/doc/NON-UNIX-USE
deleted file mode 100644
index 09a7432..0000000
--- a/external/privoxy/pcre/doc/NON-UNIX-USE
+++ /dev/null
@@ -1,50 +0,0 @@
-Compiling PCRE on non-Unix systems
-----------------------------------
-
-If you want to compile PCRE for a non-Unix system, note that it consists
-entirely of code written in Standard C, and so should compile successfully
-on any machine with a Standard C compiler and library, using normal compiling
-commands to do the following:
-
-(1) Copy or rename the file config.in as config.h, and change the macros that
-define HAVE_STRERROR and HAVE_MEMMOVE to define them as 1 rather than 0.
-Unfortunately, because of the way Unix autoconf works, the default setting has
-to be 0.
-
-(2) Copy or rename the file pcre.in as pcre.h, and change the macro definitions
-for PCRE_MAJOR, PCRE_MINOR, and PCRE_DATE near its start to the values set in
-configure.in.
-
-(3) Compile dftables.c as a stand-alone program, and then run it with
-the standard output sent to chartables.c. This generates a set of standard
-character tables.
-
-(4) Compile maketables.c, get.c, study.c and pcre.c and link them all
-together into an object library in whichever form your system keeps such
-libraries. This is the pcre library (chartables.c gets included by means of an
-#include directive).
-
-(5) Similarly, compile pcreposix.c and link it as the pcreposix library.
-
-(6) Compile the test program pcretest.c. This needs the functions in the
-pcre and pcreposix libraries when linking.
-
-(7) Run pcretest on the testinput files in the testdata directory, and check
-that the output matches the corresponding testoutput files. You must use the
--i option when checking testinput2.
-
-If you have a system without "configure" but where you can use a Makefile, edit
-Makefile.in to create Makefile, substituting suitable values for the variables
-at the head of the file.
-
-Some help in building a Win32 DLL of PCRE in GnuWin32 environments was
-contributed by Paul.Sokolovsky@xxxxxxxxxxxxxxxxx These environments are
-Mingw32 (http://www.xraylith.wisc.edu/~khan/software/gnu-win32/) and
-CygWin  (http://sourceware.cygnus.com/cygwin/). Paul comments:
-
-  For CygWin, set CFLAGS=-mno-cygwin, and do 'make dll'. You'll get
-  pcre.dll (containing pcreposix also), libpcre.dll.a, and dynamically
-  linked pgrep and pcretest. If you have /bin/sh, run RunTest (three
-  main test go ok, locale not supported).
-
-****
diff --git a/external/privoxy/pcre/doc/Tech.Notes b/external/privoxy/pcre/doc/Tech.Notes
deleted file mode 100644
index 7b96e5b..0000000
--- a/external/privoxy/pcre/doc/Tech.Notes
+++ /dev/null
@@ -1,243 +0,0 @@
-Technical Notes about PCRE
---------------------------
-
-Many years ago I implemented some regular expression functions to an algorithm
-suggested by Martin Richards. These were not Unix-like in form, and were quite
-restricted in what they could do by comparison with Perl. The interesting part
-about the algorithm was that the amount of space required to hold the compiled
-form of an expression was known in advance. The code to apply an expression did
-not operate by backtracking, as the Henry Spencer and Perl code does, but
-instead checked all possibilities simultaneously by keeping a list of current
-states and checking all of them as it advanced through the subject string. (In
-the terminology of Jeffrey Friedl's book, it was a "DFA algorithm".) When the
-pattern was all used up, all remaining states were possible matches, and the
-one matching the longest subset of the subject string was chosen. This did not
-necessarily maximize the individual wild portions of the pattern, as is
-expected in Unix and Perl-style regular expressions.
-
-By contrast, the code originally written by Henry Spencer and subsequently
-heavily modified for Perl actually compiles the expression twice: once in a
-dummy mode in order to find out how much store will be needed, and then for
-real. The execution function operates by backtracking and maximizing (or,
-optionally, minimizing in Perl) the amount of the subject that matches
-individual wild portions of the pattern. This is an "NFA algorithm" in Friedl's
-terminology.
-
-For the set of functions that forms PCRE (which are unrelated to those
-mentioned above), I tried at first to invent an algorithm that used an amount
-of store bounded by a multiple of the number of characters in the pattern, to
-save on compiling time. However, because of the greater complexity in Perl
-regular expressions, I couldn't do this. In any case, a first pass through the
-pattern is needed, in order to find internal flag settings like (?i) at top
-level. So PCRE works by running a very degenerate first pass to calculate a
-maximum store size, and then a second pass to do the real compile - which may
-use a bit less than the predicted amount of store. The idea is that this is
-going to turn out faster because the first pass is degenerate and the second
-pass can just store stuff straight into the vector. It does make the compiling
-functions bigger, of course, but they have got quite big anyway to handle all
-the Perl stuff.
-
-The compiled form of a pattern is a vector of bytes, containing items of
-variable length. The first byte in an item is an opcode, and the length of the
-item is either implicit in the opcode or contained in the data bytes which
-follow it. A list of all the opcodes follows:
-
-Opcodes with no following data
-------------------------------
-
-These items are all just one byte long
-
-  OP_END                 end of pattern
-  OP_ANY                 match any character
-  OP_SOD                 match start of data: \A
-  OP_CIRC                ^ (start of data, or after \n in multiline)
-  OP_NOT_WORD_BOUNDARY   \W
-  OP_WORD_BOUNDARY       \w
-  OP_NOT_DIGIT           \D
-  OP_DIGIT               \d
-  OP_NOT_WHITESPACE      \S
-  OP_WHITESPACE          \s
-  OP_NOT_WORDCHAR        \W
-  OP_WORDCHAR            \w
-  OP_EODN                match end of data or \n at end: \Z
-  OP_EOD                 match end of data: \z
-  OP_DOLL                $ (end of data, or before \n in multiline)
-  OP_RECURSE             match the pattern recursively
-
-
-Repeating single characters
----------------------------
-
-The common repeats (*, +, ?) when applied to a single character appear as
-two-byte items using the following opcodes:
-
-  OP_STAR
-  OP_MINSTAR
-  OP_PLUS
-  OP_MINPLUS
-  OP_QUERY
-  OP_MINQUERY
-
-Those with "MIN" in their name are the minimizing versions. Each is followed by
-the character that is to be repeated. Other repeats make use of
-
-  OP_UPTO
-  OP_MINUPTO
-  OP_EXACT
-
-which are followed by a two-byte count (most significant first) and the
-repeated character. OP_UPTO matches from 0 to the given number. A repeat with a
-non-zero minimum and a fixed maximum is coded as an OP_EXACT followed by an
-OP_UPTO (or OP_MINUPTO).
-
-
-Repeating character types
--------------------------
-
-Repeats of things like \d are done exactly as for single characters, except
-that instead of a character, the opcode for the type is stored in the data
-byte. The opcodes are:
-
-  OP_TYPESTAR
-  OP_TYPEMINSTAR
-  OP_TYPEPLUS
-  OP_TYPEMINPLUS
-  OP_TYPEQUERY
-  OP_TYPEMINQUERY
-  OP_TYPEUPTO
-  OP_TYPEMINUPTO
-  OP_TYPEEXACT
-
-
-Matching a character string
----------------------------
-
-The OP_CHARS opcode is followed by a one-byte count and then that number of
-characters. If there are more than 255 characters in sequence, successive
-instances of OP_CHARS are used.
-
-
-Character classes
------------------
-
-OP_CLASS is used for a character class, provided there are at least two
-characters in the class. If there is only one character, OP_CHARS is used for a
-positive class, and OP_NOT for a negative one (that is, for something like
-[^a]). Another set of repeating opcodes (OP_NOTSTAR etc.) are used for a
-repeated, negated, single-character class. The normal ones (OP_STAR etc.) are
-used for a repeated positive single-character class.
-
-OP_CLASS is followed by a 32-byte bit map containing a 1 bit for every
-character that is acceptable. The bits are counted from the least significant
-end of each byte.
-
-
-Back references
----------------
-
-OP_REF is followed by a single byte containing the reference number.
-
-
-Repeating character classes and back references
------------------------------------------------
-
-Single-character classes are handled specially (see above). This applies to
-OP_CLASS and OP_REF. In both cases, the repeat information follows the base
-item. The matching code looks at the following opcode to see if it is one of
-
-  OP_CRSTAR
-  OP_CRMINSTAR
-  OP_CRPLUS
-  OP_CRMINPLUS
-  OP_CRQUERY
-  OP_CRMINQUERY
-  OP_CRRANGE
-  OP_CRMINRANGE
-
-All but the last two are just single-byte items. The others are followed by
-four bytes of data, comprising the minimum and maximum repeat counts.
-
-
-Brackets and alternation
-------------------------
-
-A pair of non-capturing (round) brackets is wrapped round each expression at
-compile time, so alternation always happens in the context of brackets.
-Non-capturing brackets use the opcode OP_BRA, while capturing brackets use
-OP_BRA+1, OP_BRA+2, etc. [Note for North Americans: "bracket" to some English
-speakers, including myself, can be round, square, curly, or pointy. Hence this
-usage.]
-
-A bracket opcode is followed by two bytes which give the offset to the next
-alternative OP_ALT or, if there aren't any branches, to the matching KET
-opcode. Each OP_ALT is followed by two bytes giving the offset to the next one,
-or to the KET opcode.
-
-OP_KET is used for subpatterns that do not repeat indefinitely, while
-OP_KETRMIN and OP_KETRMAX are used for indefinite repetitions, minimally or
-maximally respectively. All three are followed by two bytes giving (as a
-positive number) the offset back to the matching BRA opcode.
-
-If a subpattern is quantified such that it is permitted to match zero times, it
-is preceded by one of OP_BRAZERO or OP_BRAMINZERO. These are single-byte
-opcodes which tell the matcher that skipping this subpattern entirely is a
-valid branch.
-
-A subpattern with an indefinite maximum repetition is replicated in the
-compiled data its minimum number of times (or once with a BRAZERO if the
-minimum is zero), with the final copy terminating with a KETRMIN or KETRMAX as
-appropriate.
-
-A subpattern with a bounded maximum repetition is replicated in a nested
-fashion up to the maximum number of times, with BRAZERO or BRAMINZERO before
-each replication after the minimum, so that, for example, (abc){2,5} is
-compiled as (abc)(abc)((abc)((abc)(abc)?)?)?. The 200-bracket limit does not
-apply to these internally generated brackets.
-
-
-Assertions
-----------
-
-Forward assertions are just like other subpatterns, but starting with one of
-the opcodes OP_ASSERT or OP_ASSERT_NOT. Backward assertions use the opcodes
-OP_ASSERTBACK and OP_ASSERTBACK_NOT, and the first opcode inside the assertion
-is OP_REVERSE, followed by a two byte count of the number of characters to move
-back the pointer in the subject string. When operating in UTF-8 mode, the count
-is a character count rather than a byte count. A separate count is present in
-each alternative of a lookbehind assertion, allowing them to have different
-fixed lengths.
-
-
-Once-only subpatterns
----------------------
-
-These are also just like other subpatterns, but they start with the opcode
-OP_ONCE.
-
-
-Conditional subpatterns
------------------------
-
-These are like other subpatterns, but they start with the opcode OP_COND. If
-the condition is a back reference, this is stored at the start of the
-subpattern using the opcode OP_CREF followed by one byte containing the
-reference number. Otherwise, a conditional subpattern will always start with
-one of the assertions.
-
-
-Changing options
-----------------
-
-If any of the /i, /m, or /s options are changed within a parenthesized group,
-an OP_OPT opcode is compiled, followed by one byte containing the new settings
-of these flags. If there are several alternatives in a group, there is an
-occurrence of OP_OPT at the start of all those following the first options
-change, to set appropriate options for the start of the alternative.
-Immediately after the end of the group there is another such item to reset the
-flags to their previous values. Other changes of flag within the pattern can be
-handled entirely at compile time, and so do not cause anything to be put into
-the compiled data.
-
-
-Philip Hazel
-August 2000
diff --git a/external/privoxy/pcre/doc/authors b/external/privoxy/pcre/doc/authors
deleted file mode 100644
index bfe1b5d..0000000
--- a/external/privoxy/pcre/doc/authors
+++ /dev/null
@@ -1,6 +0,0 @@
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-University of Cambridge Computing Service,
-Cambridge, England. Phone: +44 1223 334714.
-
-Copyright (c) 1997-2000 University of Cambridge
diff --git a/external/privoxy/pcre/doc/copying b/external/privoxy/pcre/doc/copying
deleted file mode 100644
index 34d20db..0000000
--- a/external/privoxy/pcre/doc/copying
+++ /dev/null
@@ -1,46 +0,0 @@
-PCRE LICENCE
-------------
-
-PCRE is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-University of Cambridge Computing Service,
-Cambridge, England. Phone: +44 1223 334714.
-
-Copyright (c) 1997-2000 University of Cambridge
-
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission. In practice, this means that if you use
-   PCRE in software which you distribute to others, commercially or
-   otherwise, you must put a sentence like this
-
-     Regular expression support is provided by the PCRE library package,
-     which is open source software, written by Philip Hazel, and copyright
-     by the University of Cambridge, England.
-
-   somewhere reasonably visible in your documentation and in any relevant
-   files or online help data or similar. A reference to the ftp site for
-   the source, that is, to
-
-     ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
-
-   should also be given in the documentation.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
-
-End
diff --git a/external/privoxy/pcre/doc/news b/external/privoxy/pcre/doc/news
deleted file mode 100644
index 56fccdf..0000000
--- a/external/privoxy/pcre/doc/news
+++ /dev/null
@@ -1,54 +0,0 @@
-News about PCRE releases
-------------------------
-
-Release 3.3 01-Aug-00
----------------------
-
-There is some support for UTF-8 character strings. This is incomplete and
-experimental. The documentation describes what is and what is not implemented.
-Otherwise, this is just a bug-fixing release.
-
-
-Release 3.0 01-Feb-00
----------------------
-
-1. A "configure" script is now used to configure PCRE for Unix systems. It
-builds a Makefile, a config.h file, and the pcre-config script.
-
-2. PCRE is built as a shared library by default.
-
-3. There is support for POSIX classes such as [:alpha:].
-
-5. There is an experimental recursion feature.
-
-----------------------------------------------------------------------------
-          IMPORTANT FOR THOSE UPGRADING FROM VERSIONS BEFORE 2.00
-
-Please note that there has been a change in the API such that a larger
-ovector is required at matching time, to provide some additional workspace.
-The new man page has details. This change was necessary in order to support
-some of the new functionality in Perl 5.005.
-
-          IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.00
-
-Another (I hope this is the last!) change has been made to the API for the
-pcre_compile() function. An additional argument has been added to make it
-possible to pass over a pointer to character tables built in the current
-locale by pcre_maketables(). To use the default tables, this new arguement
-should be passed as NULL.
-
-          IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.05
-
-Yet another (and again I hope this really is the last) change has been made
-to the API for the pcre_exec() function. An additional argument has been
-added to make it possible to start the match other than at the start of the
-subject string. This is important if there are lookbehinds. The new man
-page has the details, but you just want to convert existing programs, all
-you need to do is to stick in a new fifth argument to pcre_exec(), with a
-value of zero. For example, change
-
-  pcre_exec(pattern, extra, subject, length, options, ovec, ovecsize)
-to
-  pcre_exec(pattern, extra, subject, length, 0, options, ovec, ovecsize)
-
-****
diff --git a/external/privoxy/pcre/doc/pcre.3 b/external/privoxy/pcre/doc/pcre.3
deleted file mode 100644
index bb812f4..0000000
--- a/external/privoxy/pcre/doc/pcre.3
+++ /dev/null
@@ -1,1810 +0,0 @@
-.TH PCRE 3
-.SH NAME
-pcre - Perl-compatible regular expressions.
-.SH SYNOPSIS
-.B #include <pcre.h>
-.PP
-.SM
-.br
-.B pcre *pcre_compile(const char *\fIpattern\fR, int \fIoptions\fR,
-.ti +5n
-.B const char **\fIerrptr\fR, int *\fIerroffset\fR,
-.ti +5n
-.B const unsigned char *\fItableptr\fR);
-.PP
-.br
-.B pcre_extra *pcre_study(const pcre *\fIcode\fR, int \fIoptions\fR,
-.ti +5n
-.B const char **\fIerrptr\fR);
-.PP
-.br
-.B int pcre_exec(const pcre *\fIcode\fR, "const pcre_extra *\fIextra\fR,"
-.ti +5n
-.B "const char *\fIsubject\fR," int \fIlength\fR, int \fIstartoffset\fR,
-.ti +5n
-.B int \fIoptions\fR, int *\fIovector\fR, int \fIovecsize\fR);
-.PP
-.br
-.B int pcre_copy_substring(const char *\fIsubject\fR, int *\fIovector\fR,
-.ti +5n
-.B int \fIstringcount\fR, int \fIstringnumber\fR, char *\fIbuffer\fR,
-.ti +5n
-.B int \fIbuffersize\fR);
-.PP
-.br
-.B int pcre_get_substring(const char *\fIsubject\fR, int *\fIovector\fR,
-.ti +5n
-.B int \fIstringcount\fR, int \fIstringnumber\fR,
-.ti +5n
-.B const char **\fIstringptr\fR);
-.PP
-.br
-.B int pcre_get_substring_list(const char *\fIsubject\fR,
-.ti +5n
-.B int *\fIovector\fR, int \fIstringcount\fR, "const char ***\fIlistptr\fR);"
-.PP
-.br
-.B void pcre_free_substring(const char *\fIstringptr\fR);
-.PP
-.br
-.B void pcre_free_substring_list(const char **\fIstringptr\fR);
-.PP
-.br
-.B const unsigned char *pcre_maketables(void);
-.PP
-.br
-.B int pcre_fullinfo(const pcre *\fIcode\fR, "const pcre_extra *\fIextra\fR,"
-.ti +5n
-.B int \fIwhat\fR, void *\fIwhere\fR);
-.PP
-.br
-.B int pcre_info(const pcre *\fIcode\fR, int *\fIoptptr\fR, int
-.B *\fIfirstcharptr\fR);
-.PP
-.br
-.B char *pcre_version(void);
-.PP
-.br
-.B void *(*pcre_malloc)(size_t);
-.PP
-.br
-.B void (*pcre_free)(void *);
-
-
-
-.SH DESCRIPTION
-The PCRE library is a set of functions that implement regular expression
-pattern matching using the same syntax and semantics as Perl 5, with just a few
-differences (see below). The current implementation corresponds to Perl 5.005,
-with some additional features from later versions. This includes some
-experimental, incomplete support for UTF-8 encoded strings. Details of exactly
-what is and what is not supported are given below.
-
-PCRE has its own native API, which is described in this document. There is also
-a set of wrapper functions that correspond to the POSIX regular expression API.
-These are described in the \fBpcreposix\fR documentation.
-
-The native API function prototypes are defined in the header file \fBpcre.h\fR,
-and on Unix systems the library itself is called \fBlibpcre.a\fR, so can be
-accessed by adding \fB-lpcre\fR to the command for linking an application which
-calls it. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to
-contain the major and minor release numbers for the library. Applications can
-use these to include support for different releases.
-
-The functions \fBpcre_compile()\fR, \fBpcre_study()\fR, and \fBpcre_exec()\fR
-are used for compiling and matching regular expressions.
-
-The functions \fBpcre_copy_substring()\fR, \fBpcre_get_substring()\fR, and
-\fBpcre_get_substring_list()\fR are convenience functions for extracting
-captured substrings from a matched subject string; \fBpcre_free_substring()\fR
-and \fBpcre_free_substring_list()\fR are also provided, to free the memory used
-for extracted strings.
-
-The function \fBpcre_maketables()\fR is used (optionally) to build a set of
-character tables in the current locale for passing to \fBpcre_compile()\fR.
-
-The function \fBpcre_fullinfo()\fR is used to find out information about a
-compiled pattern; \fBpcre_info()\fR is an obsolete version which returns only
-some of the available information, but is retained for backwards compatibility.
-The function \fBpcre_version()\fR returns a pointer to a string containing the
-version of PCRE and its date of release.
-
-The global variables \fBpcre_malloc\fR and \fBpcre_free\fR initially contain
-the entry points of the standard \fBmalloc()\fR and \fBfree()\fR functions
-respectively. PCRE calls the memory management functions via these variables,
-so a calling program can replace them if it wishes to intercept the calls. This
-should be done before calling any PCRE functions.
-
-
-.SH MULTI-THREADING
-The PCRE functions can be used in multi-threading applications, with the
-proviso that the memory management functions pointed to by \fBpcre_malloc\fR
-and \fBpcre_free\fR are shared by all threads.
-
-The compiled form of a regular expression is not altered during matching, so
-the same compiled pattern can safely be used by several threads at once.
-
-
-.SH COMPILING A PATTERN
-The function \fBpcre_compile()\fR is called to compile a pattern into an
-internal form. The pattern is a C string terminated by a binary zero, and
-is passed in the argument \fIpattern\fR. A pointer to a single block of memory
-that is obtained via \fBpcre_malloc\fR is returned. This contains the
-compiled code and related data. The \fBpcre\fR type is defined for this for
-convenience, but in fact \fBpcre\fR is just a typedef for \fBvoid\fR, since the
-contents of the block are not externally defined. It is up to the caller to
-free the memory when it is no longer required.
-.PP
-The size of a compiled pattern is roughly proportional to the length of the
-pattern string, except that each character class (other than those containing
-just a single character, negated or not) requires 33 bytes, and repeat
-quantifiers with a minimum greater than one or a bounded maximum cause the
-relevant portions of the compiled pattern to be replicated.
-.PP
-The \fIoptions\fR argument contains independent bits that affect the
-compilation. It should be zero if no options are required. Some of the options,
-in particular, those that are compatible with Perl, can also be set and unset
-from within the pattern (see the detailed description of regular expressions
-below). For these options, the contents of the \fIoptions\fR argument specifies
-their initial settings at the start of compilation and execution. The
-PCRE_ANCHORED option can be set at the time of matching as well as at compile
-time.
-.PP
-If \fIerrptr\fR is NULL, \fBpcre_compile()\fR returns NULL immediately.
-Otherwise, if compilation of a pattern fails, \fBpcre_compile()\fR returns
-NULL, and sets the variable pointed to by \fIerrptr\fR to point to a textual
-error message. The offset from the start of the pattern to the character where
-the error was discovered is placed in the variable pointed to by
-\fIerroffset\fR, which must not be NULL. If it is, an immediate error is given.
-.PP
-If the final argument, \fItableptr\fR, is NULL, PCRE uses a default set of
-character tables which are built when it is compiled, using the default C
-locale. Otherwise, \fItableptr\fR must be the result of a call to
-\fBpcre_maketables()\fR. See the section on locale support below.
-.PP
-The following option bits are defined in the header file:
-
-  PCRE_ANCHORED
-
-If this bit is set, the pattern is forced to be "anchored", that is, it is
-constrained to match only at the start of the string which is being searched
-(the "subject string"). This effect can also be achieved by appropriate
-constructs in the pattern itself, which is the only way to do it in Perl.
-
-  PCRE_CASELESS
-
-If this bit is set, letters in the pattern match both upper and lower case
-letters. It is equivalent to Perl's /i option.
-
-  PCRE_DOLLAR_ENDONLY
-
-If this bit is set, a dollar metacharacter in the pattern matches only at the
-end of the subject string. Without this option, a dollar also matches
-immediately before the final character if it is a newline (but not before any
-other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is
-set. There is no equivalent to this option in Perl.
-
-  PCRE_DOTALL
-
-If this bit is set, a dot metacharater in the pattern matches all characters,
-including newlines. Without it, newlines are excluded. This option is
-equivalent to Perl's /s option. A negative class such as [^a] always matches a
-newline character, independent of the setting of this option.
-
-  PCRE_EXTENDED
-
-If this bit is set, whitespace data characters in the pattern are totally
-ignored except when escaped or inside a character class, and characters between
-an unescaped # outside a character class and the next newline character,
-inclusive, are also ignored. This is equivalent to Perl's /x option, and makes
-it possible to include comments inside complicated patterns. Note, however,
-that this applies only to data characters. Whitespace characters may never
-appear within special character sequences in a pattern, for example within the
-sequence (?( which introduces a conditional subpattern.
-
-  PCRE_EXTRA
-
-This option was invented in order to turn on additional functionality of PCRE
-that is incompatible with Perl, but it is currently of very little use. When
-set, any backslash in a pattern that is followed by a letter that has no
-special meaning causes an error, thus reserving these combinations for future
-expansion. By default, as in Perl, a backslash followed by a letter with no
-special meaning is treated as a literal. There are at present no other features
-controlled by this option. It can also be set by a (?X) option setting within a
-pattern.
-
-  PCRE_MULTILINE
-
-By default, PCRE treats the subject string as consisting of a single "line" of
-characters (even if it actually contains several newlines). The "start of line"
-metacharacter (^) matches only at the start of the string, while the "end of
-line" metacharacter ($) matches only at the end of the string, or before a
-terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as
-Perl.
-
-When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs
-match immediately following or immediately before any newline in the subject
-string, respectively, as well as at the very start and end. This is equivalent
-to Perl's /m option. If there are no "\\n" characters in a subject string, or
-no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no
-effect.
-
-  PCRE_UNGREEDY
-
-This option inverts the "greediness" of the quantifiers so that they are not
-greedy by default, but become greedy if followed by "?". It is not compatible
-with Perl. It can also be set by a (?U) option setting within the pattern.
-
-  PCRE_UTF8
-
-This option causes PCRE to regard both the pattern and the subject as strings
-of UTF-8 characters instead of just byte strings. However, it is available only
-if PCRE has been built to include UTF-8 support. If not, the use of this option
-provokes an error. Support for UTF-8 is new, experimental, and incomplete.
-Details of exactly what it entails are given below.
-
-
-.SH STUDYING A PATTERN
-When a pattern is going to be used several times, it is worth spending more
-time analyzing it in order to speed up the time taken for matching. The
-function \fBpcre_study()\fR takes a pointer to a compiled pattern as its first
-argument, and returns a pointer to a \fBpcre_extra\fR block (another \fBvoid\fR
-typedef) containing additional information about the pattern; this can be
-passed to \fBpcre_exec()\fR. If no additional information is available, NULL
-is returned.
-
-The second argument contains option bits. At present, no options are defined
-for \fBpcre_study()\fR, and this argument should always be zero.
-
-The third argument for \fBpcre_study()\fR is a pointer to an error message. If
-studying succeeds (even if no data is returned), the variable it points to is
-set to NULL. Otherwise it points to a textual error message.
-
-At present, studying a pattern is useful only for non-anchored patterns that do
-not have a single fixed starting character. A bitmap of possible starting
-characters is created.
-
-
-.SH LOCALE SUPPORT
-PCRE handles caseless matching, and determines whether characters are letters,
-digits, or whatever, by reference to a set of tables. The library contains a
-default set of tables which is created in the default C locale when PCRE is
-compiled. This is used when the final argument of \fBpcre_compile()\fR is NULL,
-and is sufficient for many applications.
-
-An alternative set of tables can, however, be supplied. Such tables are built
-by calling the \fBpcre_maketables()\fR function, which has no arguments, in the
-relevant locale. The result can then be passed to \fBpcre_compile()\fR as often
-as necessary. For example, to build and use tables that are appropriate for the
-French locale (where accented characters with codes greater than 128 are
-treated as letters), the following code could be used:
-
-  setlocale(LC_CTYPE, "fr");
-  tables = pcre_maketables();
-  re = pcre_compile(..., tables);
-
-The tables are built in memory that is obtained via \fBpcre_malloc\fR. The
-pointer that is passed to \fBpcre_compile\fR is saved with the compiled
-pattern, and the same tables are used via this pointer by \fBpcre_study()\fR
-and \fBpcre_exec()\fR. Thus for any single pattern, compilation, studying and
-matching all happen in the same locale, but different patterns can be compiled
-in different locales. It is the caller's responsibility to ensure that the
-memory containing the tables remains available for as long as it is needed.
-
-
-.SH INFORMATION ABOUT A PATTERN
-The \fBpcre_fullinfo()\fR function returns information about a compiled
-pattern. It replaces the obsolete \fBpcre_info()\fR function, which is
-nevertheless retained for backwards compability (and is documented below).
-
-The first argument for \fBpcre_fullinfo()\fR is a pointer to the compiled
-pattern. The second argument is the result of \fBpcre_study()\fR, or NULL if
-the pattern was not studied. The third argument specifies which piece of
-information is required, while the fourth argument is a pointer to a variable
-to receive the data. The yield of the function is zero for success, or one of
-the following negative numbers:
-
-  PCRE_ERROR_NULL       the argument \fIcode\fR was NULL
-                        the argument \fIwhere\fR was NULL
-  PCRE_ERROR_BADMAGIC   the "magic number" was not found
-  PCRE_ERROR_BADOPTION  the value of \fIwhat\fR was invalid
-
-The possible values for the third argument are defined in \fBpcre.h\fR, and are
-as follows:
-
-  PCRE_INFO_OPTIONS
-
-Return a copy of the options with which the pattern was compiled. The fourth
-argument should point to au \fBunsigned long int\fR variable. These option bits
-are those specified in the call to \fBpcre_compile()\fR, modified by any
-top-level option settings within the pattern itself, and with the PCRE_ANCHORED
-bit forcibly set if the form of the pattern implies that it can match only at
-the start of a subject string.
-
-  PCRE_INFO_SIZE
-
-Return the size of the compiled pattern, that is, the value that was passed as
-the argument to \fBpcre_malloc()\fR when PCRE was getting memory in which to
-place the compiled data. The fourth argument should point to a \fBsize_t\fR
-variable.
-
-  PCRE_INFO_CAPTURECOUNT
-
-Return the number of capturing subpatterns in the pattern. The fourth argument
-should point to an \fbint\fR variable.
-
-  PCRE_INFO_BACKREFMAX
-
-Return the number of the highest back reference in the pattern. The fourth
-argument should point to an \fBint\fR variable. Zero is returned if there are
-no back references.
-
-  PCRE_INFO_FIRSTCHAR
-
-Return information about the first character of any matched string, for a
-non-anchored pattern. If there is a fixed first character, e.g. from a pattern
-such as (cat|cow|coyote), it is returned in the integer pointed to by
-\fIwhere\fR. Otherwise, if either
-
-(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch
-starts with "^", or
-
-(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set
-(if it were set, the pattern would be anchored),
-
--1 is returned, indicating that the pattern matches only at the start of a
-subject string or after any "\\n" within the string. Otherwise -2 is returned.
-For anchored patterns, -2 is returned.
-
-  PCRE_INFO_FIRSTTABLE
-
-If the pattern was studied, and this resulted in the construction of a 256-bit
-table indicating a fixed set of characters for the first character in any
-matching string, a pointer to the table is returned. Otherwise NULL is
-returned. The fourth argument should point to an \fBunsigned char *\fR
-variable.
-
-  PCRE_INFO_LASTLITERAL
-
-For a non-anchored pattern, return the value of the rightmost literal character
-which must exist in any matched string, other than at its start. The fourth
-argument should point to an \fBint\fR variable. If there is no such character,
-or if the pattern is anchored, -1 is returned. For example, for the pattern
-/a\\d+z\\d+/ the returned value is 'z'.
-
-The \fBpcre_info()\fR function is now obsolete because its interface is too
-restrictive to return all the available data about a compiled pattern. New
-programs should use \fBpcre_fullinfo()\fR instead. The yield of
-\fBpcre_info()\fR is the number of capturing subpatterns, or one of the
-following negative numbers:
-
-  PCRE_ERROR_NULL       the argument \fIcode\fR was NULL
-  PCRE_ERROR_BADMAGIC   the "magic number" was not found
-
-If the \fIoptptr\fR argument is not NULL, a copy of the options with which the
-pattern was compiled is placed in the integer it points to (see
-PCRE_INFO_OPTIONS above).
-
-If the pattern is not anchored and the \fIfirstcharptr\fR argument is not NULL,
-it is used to pass back information about the first character of any matched
-string (see PCRE_INFO_FIRSTCHAR above).
-
-
-.SH MATCHING A PATTERN
-The function \fBpcre_exec()\fR is called to match a subject string against a
-pre-compiled pattern, which is passed in the \fIcode\fR argument. If the
-pattern has been studied, the result of the study should be passed in the
-\fIextra\fR argument. Otherwise this must be NULL.
-
-The PCRE_ANCHORED option can be passed in the \fIoptions\fR argument, whose
-unused bits must be zero. However, if a pattern was compiled with
-PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it
-cannot be made unachored at matching time.
-
-There are also three further options that can be set only at matching time:
-
-  PCRE_NOTBOL
-
-The first character of the string is not the beginning of a line, so the
-circumflex metacharacter should not match before it. Setting this without
-PCRE_MULTILINE (at compile time) causes circumflex never to match.
-
-  PCRE_NOTEOL
-
-The end of the string is not the end of a line, so the dollar metacharacter
-should not match it nor (except in multiline mode) a newline immediately before
-it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never
-to match.
-
-  PCRE_NOTEMPTY
-
-An empty string is not considered to be a valid match if this option is set. If
-there are alternatives in the pattern, they are tried. If all the alternatives
-match the empty string, the entire match fails. For example, if the pattern
-
-  a?b?
-
-is applied to a string not beginning with "a" or "b", it matches the empty
-string at the start of the subject. With PCRE_NOTEMPTY set, this match is not
-valid, so PCRE searches further into the string for occurrences of "a" or "b".
-
-Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case
-of a pattern match of the empty string within its \fBsplit()\fR function, and
-when using the /g modifier. It is possible to emulate Perl's behaviour after
-matching a null string by first trying the match again at the same offset with
-PCRE_NOTEMPTY set, and then if that fails by advancing the starting offset (see
-below) and trying an ordinary match again.
-
-The subject string is passed as a pointer in \fIsubject\fR, a length in
-\fIlength\fR, and a starting offset in \fIstartoffset\fR. Unlike the pattern
-string, it may contain binary zero characters. When the starting offset is
-zero, the search for a match starts at the beginning of the subject, and this
-is by far the most common case.
-
-A non-zero starting offset is useful when searching for another match in the
-same subject by calling \fBpcre_exec()\fR again after a previous success.
-Setting \fIstartoffset\fR differs from just passing over a shortened string and
-setting PCRE_NOTBOL in the case of a pattern that begins with any kind of
-lookbehind. For example, consider the pattern
-
-  \\Biss\\B
-
-which finds occurrences of "iss" in the middle of words. (\\B matches only if
-the current position in the subject is not a word boundary.) When applied to
-the string "Mississipi" the first call to \fBpcre_exec()\fR finds the first
-occurrence. If \fBpcre_exec()\fR is called again with just the remainder of the
-subject, namely "issipi", it does not match, because \\B is always false at the
-start of the subject, which is deemed to be a word boundary. However, if
-\fBpcre_exec()\fR is passed the entire string again, but with \fIstartoffset\fR
-set to 4, it finds the second occurrence of "iss" because it is able to look
-behind the starting point to discover that it is preceded by a letter.
-
-If a non-zero starting offset is passed when the pattern is anchored, one
-attempt to match at the given offset is tried. This can only succeed if the
-pattern does not require the match to be at the start of the subject.
-
-In general, a pattern matches a certain portion of the subject, and in
-addition, further substrings from the subject may be picked out by parts of the
-pattern. Following the usage in Jeffrey Friedl's book, this is called
-"capturing" in what follows, and the phrase "capturing subpattern" is used for
-a fragment of a pattern that picks out a substring. PCRE supports several other
-kinds of parenthesized subpattern that do not cause substrings to be captured.
-
-Captured substrings are returned to the caller via a vector of integer offsets
-whose address is passed in \fIovector\fR. The number of elements in the vector
-is passed in \fIovecsize\fR. The first two-thirds of the vector is used to pass
-back captured substrings, each substring using a pair of integers. The
-remaining third of the vector is used as workspace by \fBpcre_exec()\fR while
-matching capturing subpatterns, and is not available for passing back
-information. The length passed in \fIovecsize\fR should always be a multiple of
-three. If it is not, it is rounded down.
-
-When a match has been successful, information about captured substrings is
-returned in pairs of integers, starting at the beginning of \fIovector\fR, and
-continuing up to two-thirds of its length at the most. The first element of a
-pair is set to the offset of the first character in a substring, and the second
-is set to the offset of the first character after the end of a substring. The
-first pair, \fIovector[0]\fR and \fIovector[1]\fR, identify the portion of the
-subject string matched by the entire pattern. The next pair is used for the
-first capturing subpattern, and so on. The value returned by \fBpcre_exec()\fR
-is the number of pairs that have been set. If there are no capturing
-subpatterns, the return value from a successful match is 1, indicating that
-just the first pair of offsets has been set.
-
-Some convenience functions are provided for extracting the captured substrings
-as separate strings. These are described in the following section.
-
-It is possible for an capturing subpattern number \fIn+1\fR to match some
-part of the subject when subpattern \fIn\fR has not been used at all. For
-example, if the string "abc" is matched against the pattern (a|(z))(bc)
-subpatterns 1 and 3 are matched, but 2 is not. When this happens, both offset
-values corresponding to the unused subpattern are set to -1.
-
-If a capturing subpattern is matched repeatedly, it is the last portion of the
-string that it matched that gets returned.
-
-If the vector is too small to hold all the captured substrings, it is used as
-far as possible (up to two-thirds of its length), and the function returns a
-value of zero. In particular, if the substring offsets are not of interest,
-\fBpcre_exec()\fR may be called with \fIovector\fR passed as NULL and
-\fIovecsize\fR as zero. However, if the pattern contains back references and
-the \fIovector\fR isn't big enough to remember the related substrings, PCRE has
-to get additional memory for use during matching. Thus it is usually advisable
-to supply an \fIovector\fR.
-
-Note that \fBpcre_info()\fR can be used to find out how many capturing
-subpatterns there are in a compiled pattern. The smallest size for
-\fIovector\fR that will allow for \fIn\fR captured substrings in addition to
-the offsets of the substring matched by the whole pattern is (\fIn\fR+1)*3.
-
-If \fBpcre_exec()\fR fails, it returns a negative number. The following are
-defined in the header file:
-
-  PCRE_ERROR_NOMATCH        (-1)
-
-The subject string did not match the pattern.
-
-  PCRE_ERROR_NULL           (-2)
-
-Either \fIcode\fR or \fIsubject\fR was passed as NULL, or \fIovector\fR was
-NULL and \fIovecsize\fR was not zero.
-
-  PCRE_ERROR_BADOPTION      (-3)
-
-An unrecognized bit was set in the \fIoptions\fR argument.
-
-  PCRE_ERROR_BADMAGIC       (-4)
-
-PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch
-the case when it is passed a junk pointer. This is the error it gives when the
-magic number isn't present.
-
-  PCRE_ERROR_UNKNOWN_NODE   (-5)
-
-While running the pattern match, an unknown item was encountered in the
-compiled pattern. This error could be caused by a bug in PCRE or by overwriting
-of the compiled pattern.
-
-  PCRE_ERROR_NOMEMORY       (-6)
-
-If a pattern contains back references, but the \fIovector\fR that is passed to
-\fBpcre_exec()\fR is not big enough to remember the referenced substrings, PCRE
-gets a block of memory at the start of matching to use for this purpose. If the
-call via \fBpcre_malloc()\fR fails, this error is given. The memory is freed at
-the end of matching.
-
-
-.SH EXTRACTING CAPTURED SUBSTRINGS
-Captured substrings can be accessed directly by using the offsets returned by
-\fBpcre_exec()\fR in \fIovector\fR. For convenience, the functions
-\fBpcre_copy_substring()\fR, \fBpcre_get_substring()\fR, and
-\fBpcre_get_substring_list()\fR are provided for extracting captured substrings
-as new, separate, zero-terminated strings. A substring that contains a binary
-zero is correctly extracted and has a further zero added on the end, but the
-result does not, of course, function as a C string.
-
-The first three arguments are the same for all three functions: \fIsubject\fR
-is the subject string which has just been successfully matched, \fIovector\fR
-is a pointer to the vector of integer offsets that was passed to
-\fBpcre_exec()\fR, and \fIstringcount\fR is the number of substrings that
-were captured by the match, including the substring that matched the entire
-regular expression. This is the value returned by \fBpcre_exec\fR if it
-is greater than zero. If \fBpcre_exec()\fR returned zero, indicating that it
-ran out of space in \fIovector\fR, the value passed as \fIstringcount\fR should
-be the size of the vector divided by three.
-
-The functions \fBpcre_copy_substring()\fR and \fBpcre_get_substring()\fR
-extract a single substring, whose number is given as \fIstringnumber\fR. A
-value of zero extracts the substring that matched the entire pattern, while
-higher values extract the captured substrings. For \fBpcre_copy_substring()\fR,
-the string is placed in \fIbuffer\fR, whose length is given by
-\fIbuffersize\fR, while for \fBpcre_get_substring()\fR a new block of memory is
-obtained via \fBpcre_malloc\fR, and its address is returned via
-\fIstringptr\fR. The yield of the function is the length of the string, not
-including the terminating zero, or one of
-
-  PCRE_ERROR_NOMEMORY       (-6)
-
-The buffer was too small for \fBpcre_copy_substring()\fR, or the attempt to get
-memory failed for \fBpcre_get_substring()\fR.
-
-  PCRE_ERROR_NOSUBSTRING    (-7)
-
-There is no substring whose number is \fIstringnumber\fR.
-
-The \fBpcre_get_substring_list()\fR function extracts all available substrings
-and builds a list of pointers to them. All this is done in a single block of
-memory which is obtained via \fBpcre_malloc\fR. The address of the memory block
-is returned via \fIlistptr\fR, which is also the start of the list of string
-pointers. The end of the list is marked by a NULL pointer. The yield of the
-function is zero if all went well, or
-
-  PCRE_ERROR_NOMEMORY       (-6)
-
-if the attempt to get the memory block failed.
-
-When any of these functions encounter a substring that is unset, which can
-happen when capturing subpattern number \fIn+1\fR matches some part of the
-subject, but subpattern \fIn\fR has not been used at all, they return an empty
-string. This can be distinguished from a genuine zero-length substring by
-inspecting the appropriate offset in \fIovector\fR, which is negative for unset
-substrings.
-
-The two convenience functions \fBpcre_free_substring()\fR and
-\fBpcre_free_substring_list()\fR can be used to free the memory returned by
-a previous call of \fBpcre_get_substring()\fR or
-\fBpcre_get_substring_list()\fR, respectively. They do nothing more than call
-the function pointed to by \fBpcre_free\fR, which of course could be called
-directly from a C program. However, PCRE is used in some situations where it is
-linked via a special interface to another programming language which cannot use
-\fBpcre_free\fR directly; it is for these cases that the functions are
-provided.
-
-
-.SH LIMITATIONS
-There are some size limitations in PCRE but it is hoped that they will never in
-practice be relevant.
-The maximum length of a compiled pattern is 65539 (sic) bytes.
-All values in repeating quantifiers must be less than 65536.
-The maximum number of capturing subpatterns is 99.
-The maximum number of all parenthesized subpatterns, including capturing
-subpatterns, assertions, and other types of subpattern, is 200.
-
-The maximum length of a subject string is the largest positive number that an
-integer variable can hold. However, PCRE uses recursion to handle subpatterns
-and indefinite repetition. This means that the available stack space may limit
-the size of a subject string that can be processed by certain patterns.
-
-
-.SH DIFFERENCES FROM PERL
-The differences described here are with respect to Perl 5.005.
-
-1. By default, a whitespace character is any character that the C library
-function \fBisspace()\fR recognizes, though it is possible to compile PCRE with
-alternative character type tables. Normally \fBisspace()\fR matches space,
-formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5
-no longer includes vertical tab in its set of whitespace characters. The \\v
-escape that was in the Perl documentation for a long time was never in fact
-recognized. However, the character itself was treated as whitespace at least
-up to 5.002. In 5.004 and 5.005 it does not match \\s.
-
-2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits
-them, but they do not mean what you might think. For example, (?!a){3} does
-not assert that the next three characters are not "a". It just asserts that the
-next character is not "a" three times.
-
-3. Capturing subpatterns that occur inside negative lookahead assertions are
-counted, but their entries in the offsets vector are never set. Perl sets its
-numerical variables from any such patterns that are matched before the
-assertion fails to match something (thereby succeeding), but only if the
-negative lookahead assertion contains just one branch.
-
-4. Though binary zero characters are supported in the subject string, they are
-not allowed in a pattern string because it is passed as a normal C string,
-terminated by zero. The escape sequence "\\0" can be used in the pattern to
-represent a binary zero.
-
-5. The following Perl escape sequences are not supported: \\l, \\u, \\L, \\U,
-\\E, \\Q. In fact these are implemented by Perl's general string-handling and
-are not part of its pattern matching engine.
-
-6. The Perl \\G assertion is not supported as it is not relevant to single
-pattern matches.
-
-7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code})
-constructions. However, there is some experimental support for recursive
-patterns using the non-Perl item (?R).
-
-8. There are at the time of writing some oddities in Perl 5.005_02 concerned
-with the settings of captured strings when part of a pattern is repeated. For
-example, matching "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value
-"b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 unset. However, if
-the pattern is changed to /^(aa(b(b))?)+$/ then $2 (and $3) are set.
-
-In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the
-future Perl changes to a consistent state that is different, PCRE may change to
-follow.
-
-9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern
-/^(a)?(?(1)a|b)+$/ matches the string "a", whereas in PCRE it does not.
-However, in both Perl and PCRE /^(a)?a/ matched against "a" leaves $1 unset.
-
-10. PCRE provides some extensions to the Perl regular expression facilities:
-
-(a) Although lookbehind assertions must match fixed length strings, each
-alternative branch of a lookbehind assertion can match a different length of
-string. Perl 5.005 requires them all to have the same length.
-
-(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta-
-character matches only at the very end of the string.
-
-(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special
-meaning is faulted.
-
-(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is
-inverted, that is, by default they are not greedy, but if followed by a
-question mark they are.
-
-(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start
-of the subject.
-
-(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for
-\fBpcre_exec()\fR have no Perl equivalents.
-
-(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do
-this using the (?p{code}) construct, which PCRE cannot of course support.)
-
-
-.SH REGULAR EXPRESSION DETAILS
-The syntax and semantics of the regular expressions supported by PCRE are
-described below. Regular expressions are also described in the Perl
-documentation and in a number of other books, some of which have copious
-examples. Jeffrey Friedl's "Mastering Regular Expressions", published by
-O'Reilly (ISBN 1-56592-257), covers them in great detail.
-
-The description here is intended as reference documentation. The basic
-operation of PCRE is on strings of bytes. However, there is the beginnings of
-some support for UTF-8 character strings. To use this support you must
-configure PCRE to include it, and then call \fBpcre_compile()\fR with the
-PCRE_UTF8 option. How this affects the pattern matching is described in the
-final section of this document.
-
-A regular expression is a pattern that is matched against a subject string from
-left to right. Most characters stand for themselves in a pattern, and match the
-corresponding characters in the subject. As a trivial example, the pattern
-
-  The quick brown fox
-
-matches a portion of a subject string that is identical to itself. The power of
-regular expressions comes from the ability to include alternatives and
-repetitions in the pattern. These are encoded in the pattern by the use of
-\fImeta-characters\fR, which do not stand for themselves but instead are
-interpreted in some special way.
-
-There are two different sets of meta-characters: those that are recognized
-anywhere in the pattern except within square brackets, and those that are
-recognized in square brackets. Outside square brackets, the meta-characters are
-as follows:
-
-  \\      general escape character with several uses
-  ^      assert start of subject (or line, in multiline mode)
-  $      assert end of subject (or line, in multiline mode)
-  .      match any character except newline (by default)
-  [      start character class definition
-  |      start of alternative branch
-  (      start subpattern
-  )      end subpattern
-  ?      extends the meaning of (
-         also 0 or 1 quantifier
-         also quantifier minimizer
-  *      0 or more quantifier
-  +      1 or more quantifier
-  {      start min/max quantifier
-
-Part of a pattern that is in square brackets is called a "character class". In
-a character class the only meta-characters are:
-
-  \\      general escape character
-  ^      negate the class, but only if the first character
-  -      indicates character range
-  ]      terminates the character class
-
-The following sections describe the use of each of the meta-characters.
-
-
-.SH BACKSLASH
-The backslash character has several uses. Firstly, if it is followed by a
-non-alphameric character, it takes away any special meaning that character may
-have. This use of backslash as an escape character applies both inside and
-outside character classes.
-
-For example, if you want to match a "*" character, you write "\\*" in the
-pattern. This applies whether or not the following character would otherwise be
-interpreted as a meta-character, so it is always safe to precede a
-non-alphameric with "\\" to specify that it stands for itself. In particular,
-if you want to match a backslash, you write "\\\\".
-
-If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the
-pattern (other than in a character class) and characters between a "#" outside
-a character class and the next newline character are ignored. An escaping
-backslash can be used to include a whitespace or "#" character as part of the
-pattern.
-
-A second use of backslash provides a way of encoding non-printing characters
-in patterns in a visible manner. There is no restriction on the appearance of
-non-printing characters, apart from the binary zero that terminates a pattern,
-but when a pattern is being prepared by text editing, it is usually easier to
-use one of the following escape sequences than the binary character it
-represents:
-
-  \\a     alarm, that is, the BEL character (hex 07)
-  \\cx    "control-x", where x is any character
-  \\e     escape (hex 1B)
-  \\f     formfeed (hex 0C)
-  \\n     newline (hex 0A)
-  \\r     carriage return (hex 0D)
-  \\t     tab (hex 09)
-  \\xhh   character with hex code hh
-  \\ddd   character with octal code ddd, or backreference
-
-The precise effect of "\\cx" is as follows: if "x" is a lower case letter, it
-is converted to upper case. Then bit 6 of the character (hex 40) is inverted.
-Thus "\\cz" becomes hex 1A, but "\\c{" becomes hex 3B, while "\\c;" becomes hex
-7B.
-
-After "\\x", up to two hexadecimal digits are read (letters can be in upper or
-lower case).
-
-After "\\0" up to two further octal digits are read. In both cases, if there
-are fewer than two digits, just those that are present are used. Thus the
-sequence "\\0\\x\\07" specifies two binary zeros followed by a BEL character.
-Make sure you supply two digits after the initial zero if the character that
-follows is itself an octal digit.
-
-The handling of a backslash followed by a digit other than 0 is complicated.
-Outside a character class, PCRE reads it and any following digits as a decimal
-number. If the number is less than 10, or if there have been at least that many
-previous capturing left parentheses in the expression, the entire sequence is
-taken as a \fIback reference\fR. A description of how this works is given
-later, following the discussion of parenthesized subpatterns.
-
-Inside a character class, or if the decimal number is greater than 9 and there
-have not been that many capturing subpatterns, PCRE re-reads up to three octal
-digits following the backslash, and generates a single byte from the least
-significant 8 bits of the value. Any subsequent digits stand for themselves.
-For example:
-
-  \\040   is another way of writing a space
-  \\40    is the same, provided there are fewer than 40
-            previous capturing subpatterns
-  \\7     is always a back reference
-  \\11    might be a back reference, or another way of
-            writing a tab
-  \\011   is always a tab
-  \\0113  is a tab followed by the character "3"
-  \\113   is the character with octal code 113 (since there
-            can be no more than 99 back references)
-  \\377   is a byte consisting entirely of 1 bits
-  \\81    is either a back reference, or a binary zero
-            followed by the two characters "8" and "1"
-
-Note that octal values of 100 or greater must not be introduced by a leading
-zero, because no more than three octal digits are ever read.
-
-All the sequences that define a single byte value can be used both inside and
-outside character classes. In addition, inside a character class, the sequence
-"\\b" is interpreted as the backspace character (hex 08). Outside a character
-class it has a different meaning (see below).
-
-The third use of backslash is for specifying generic character types:
-
-  \\d     any decimal digit
-  \\D     any character that is not a decimal digit
-  \\s     any whitespace character
-  \\S     any character that is not a whitespace character
-  \\w     any "word" character
-  \\W     any "non-word" character
-
-Each pair of escape sequences partitions the complete set of characters into
-two disjoint sets. Any given character matches one, and only one, of each pair.
-
-A "word" character is any letter or digit or the underscore character, that is,
-any character which can be part of a Perl "word". The definition of letters and
-digits is controlled by PCRE's character tables, and may vary if locale-
-specific matching is taking place (see "Locale support" above). For example, in
-the "fr" (French) locale, some character codes greater than 128 are used for
-accented letters, and these are matched by \\w.
-
-These character type sequences can appear both inside and outside character
-classes. They each match one character of the appropriate type. If the current
-matching point is at the end of the subject string, all of them fail, since
-there is no character to match.
-
-The fourth use of backslash is for certain simple assertions. An assertion
-specifies a condition that has to be met at a particular point in a match,
-without consuming any characters from the subject string. The use of
-subpatterns for more complicated assertions is described below. The backslashed
-assertions are
-
-  \\b     word boundary
-  \\B     not a word boundary
-  \\A     start of subject (independent of multiline mode)
-  \\Z     end of subject or newline at end (independent of multiline mode)
-  \\z     end of subject (independent of multiline mode)
-
-These assertions may not appear in character classes (but note that "\\b" has a
-different meaning, namely the backspace character, inside a character class).
-
-A word boundary is a position in the subject string where the current character
-and the previous character do not both match \\w or \\W (i.e. one matches
-\\w and the other matches \\W), or the start or end of the string if the
-first or last character matches \\w, respectively.
-
-The \\A, \\Z, and \\z assertions differ from the traditional circumflex and
-dollar (described below) in that they only ever match at the very start and end
-of the subject string, whatever options are set. They are not affected by the
-PCRE_NOTBOL or PCRE_NOTEOL options. If the \fIstartoffset\fR argument of
-\fBpcre_exec()\fR is non-zero, \\A can never match. The difference between \\Z
-and \\z is that \\Z matches before a newline that is the last character of the
-string as well as at the end of the string, whereas \\z matches only at the
-end.
-
-
-.SH CIRCUMFLEX AND DOLLAR
-Outside a character class, in the default matching mode, the circumflex
-character is an assertion which is true only if the current matching point is
-at the start of the subject string. If the \fIstartoffset\fR argument of
-\fBpcre_exec()\fR is non-zero, circumflex can never match. Inside a character
-class, circumflex has an entirely different meaning (see below).
-
-Circumflex need not be the first character of the pattern if a number of
-alternatives are involved, but it should be the first thing in each alternative
-in which it appears if the pattern is ever to match that branch. If all
-possible alternatives start with a circumflex, that is, if the pattern is
-constrained to match only at the start of the subject, it is said to be an
-"anchored" pattern. (There are also other constructs that can cause a pattern
-to be anchored.)
-
-A dollar character is an assertion which is true only if the current matching
-point is at the end of the subject string, or immediately before a newline
-character that is the last character in the string (by default). Dollar need
-not be the last character of the pattern if a number of alternatives are
-involved, but it should be the last item in any branch in which it appears.
-Dollar has no special meaning in a character class.
-
-The meaning of dollar can be changed so that it matches only at the very end of
-the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching
-time. This does not affect the \\Z assertion.
-
-The meanings of the circumflex and dollar characters are changed if the
-PCRE_MULTILINE option is set. When this is the case, they match immediately
-after and immediately before an internal "\\n" character, respectively, in
-addition to matching at the start and end of the subject string. For example,
-the pattern /^abc$/ matches the subject string "def\\nabc" in multiline mode,
-but not otherwise. Consequently, patterns that are anchored in single line mode
-because all branches start with "^" are not anchored in multiline mode, and a
-match for circumflex is possible when the \fIstartoffset\fR argument of
-\fBpcre_exec()\fR is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if
-PCRE_MULTILINE is set.
-
-Note that the sequences \\A, \\Z, and \\z can be used to match the start and
-end of the subject in both modes, and if all branches of a pattern start with
-\\A is it always anchored, whether PCRE_MULTILINE is set or not.
-
-
-.SH FULL STOP (PERIOD, DOT)
-Outside a character class, a dot in the pattern matches any one character in
-the subject, including a non-printing character, but not (by default) newline.
-If the PCRE_DOTALL option is set, dots match newlines as well. The handling of
-dot is entirely independent of the handling of circumflex and dollar, the only
-relationship being that they both involve newline characters. Dot has no
-special meaning in a character class.
-
-
-.SH SQUARE BRACKETS
-An opening square bracket introduces a character class, terminated by a closing
-square bracket. A closing square bracket on its own is not special. If a
-closing square bracket is required as a member of the class, it should be the
-first data character in the class (after an initial circumflex, if present) or
-escaped with a backslash.
-
-A character class matches a single character in the subject; the character must
-be in the set of characters defined by the class, unless the first character in
-the class is a circumflex, in which case the subject character must not be in
-the set defined by the class. If a circumflex is actually required as a member
-of the class, ensure it is not the first character, or escape it with a
-backslash.
-
-For example, the character class [aeiou] matches any lower case vowel, while
-[^aeiou] matches any character that is not a lower case vowel. Note that a
-circumflex is just a convenient notation for specifying the characters which
-are in the class by enumerating those that are not. It is not an assertion: it
-still consumes a character from the subject string, and fails if the current
-pointer is at the end of the string.
-
-When caseless matching is set, any letters in a class represent both their
-upper case and lower case versions, so for example, a caseless [aeiou] matches
-"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a
-caseful version would.
-
-The newline character is never treated in any special way in character classes,
-whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class
-such as [^a] will always match a newline.
-
-The minus (hyphen) character can be used to specify a range of characters in a
-character class. For example, [d-m] matches any letter between d and m,
-inclusive. If a minus character is required in a class, it must be escaped with
-a backslash or appear in a position where it cannot be interpreted as
-indicating a range, typically as the first or last character in the class.
-
-It is not possible to have the literal character "]" as the end character of a
-range. A pattern such as [W-]46] is interpreted as a class of two characters
-("W" and "-") followed by a literal string "46]", so it would match "W46]" or
-"-46]". However, if the "]" is escaped with a backslash it is interpreted as
-the end of range, so [W-\\]46] is interpreted as a single class containing a
-range followed by two separate characters. The octal or hexadecimal
-representation of "]" can also be used to end a range.
-
-Ranges operate in ASCII collating sequence. They can also be used for
-characters specified numerically, for example [\\000-\\037]. If a range that
-includes letters is used when caseless matching is set, it matches the letters
-in either case. For example, [W-c] is equivalent to [][\\^_`wxyzabc], matched
-caselessly, and if character tables for the "fr" locale are in use,
-[\\xc8-\\xcb] matches accented E characters in both cases.
-
-The character types \\d, \\D, \\s, \\S, \\w, and \\W may also appear in a
-character class, and add the characters that they match to the class. For
-example, [\\dABCDEF] matches any hexadecimal digit. A circumflex can
-conveniently be used with the upper case character types to specify a more
-restricted set of characters than the matching lower case type. For example,
-the class [^\\W_] matches any letter or digit, but not underscore.
-
-All non-alphameric characters other than \\, -, ^ (at the start) and the
-terminating ] are non-special in character classes, but it does no harm if they
-are escaped.
-
-
-.SH POSIX CHARACTER CLASSES
-Perl 5.6 (not yet released at the time of writing) is going to support the
-POSIX notation for character classes, which uses names enclosed by [: and :]
-within the enclosing square brackets. PCRE supports this notation. For example,
-
-  [01[:alpha:]%]
-
-matches "0", "1", any alphabetic character, or "%". The supported class names
-are
-
-  alnum    letters and digits
-  alpha    letters
-  ascii    character codes 0 - 127
-  cntrl    control characters
-  digit    decimal digits (same as \\d)
-  graph    printing characters, excluding space
-  lower    lower case letters
-  print    printing characters, including space
-  punct    printing characters, excluding letters and digits
-  space    white space (same as \\s)
-  upper    upper case letters
-  word     "word" characters (same as \\w)
-  xdigit   hexadecimal digits
-
-The names "ascii" and "word" are Perl extensions. Another Perl extension is
-negation, which is indicated by a ^ character after the colon. For example,
-
-  [12[:^digit:]]
-
-matches "1", "2", or any non-digit. PCRE (and Perl) also recogize the POSIX
-syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not
-supported, and an error is given if they are encountered.
-
-
-.SH VERTICAL BAR
-Vertical bar characters are used to separate alternative patterns. For example,
-the pattern
-
-  gilbert|sullivan
-
-matches either "gilbert" or "sullivan". Any number of alternatives may appear,
-and an empty alternative is permitted (matching the empty string).
-The matching process tries each alternative in turn, from left to right,
-and the first one that succeeds is used. If the alternatives are within a
-subpattern (defined below), "succeeds" means matching the rest of the main
-pattern as well as the alternative in the subpattern.
-
-
-.SH INTERNAL OPTION SETTING
-The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED
-can be changed from within the pattern by a sequence of Perl option letters
-enclosed between "(?" and ")". The option letters are
-
-  i  for PCRE_CASELESS
-  m  for PCRE_MULTILINE
-  s  for PCRE_DOTALL
-  x  for PCRE_EXTENDED
-
-For example, (?im) sets caseless, multiline matching. It is also possible to
-unset these options by preceding the letter with a hyphen, and a combined
-setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and
-PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also
-permitted. If a letter appears both before and after the hyphen, the option is
-unset.
-
-The scope of these option changes depends on where in the pattern the setting
-occurs. For settings that are outside any subpattern (defined below), the
-effect is the same as if the options were set or unset at the start of
-matching. The following patterns all behave in exactly the same way:
-
-  (?i)abc
-  a(?i)bc
-  ab(?i)c
-  abc(?i)
-
-which in turn is the same as compiling the pattern abc with PCRE_CASELESS set.
-In other words, such "top level" settings apply to the whole pattern (unless
-there are other changes inside subpatterns). If there is more than one setting
-of the same option at top level, the rightmost setting is used.
-
-If an option change occurs inside a subpattern, the effect is different. This
-is a change of behaviour in Perl 5.005. An option change inside a subpattern
-affects only that part of the subpattern that follows it, so
-
-  (a(?i)b)c
-
-matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used).
-By this means, options can be made to have different settings in different
-parts of the pattern. Any changes made in one alternative do carry on
-into subsequent branches within the same subpattern. For example,
-
-  (a(?i)b|c)
-
-matches "ab", "aB", "c", and "C", even though when matching "C" the first
-branch is abandoned before the option setting. This is because the effects of
-option settings happen at compile time. There would be some very weird
-behaviour otherwise.
-
-The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the
-same way as the Perl-compatible options by using the characters U and X
-respectively. The (?X) flag setting is special in that it must always occur
-earlier in the pattern than any of the additional features it turns on, even
-when it is at top level. It is best put at the start.
-
-
-.SH SUBPATTERNS
-Subpatterns are delimited by parentheses (round brackets), which can be nested.
-Marking part of a pattern as a subpattern does two things:
-
-1. It localizes a set of alternatives. For example, the pattern
-
-  cat(aract|erpillar|)
-
-matches one of the words "cat", "cataract", or "caterpillar". Without the
-parentheses, it would match "cataract", "erpillar" or the empty string.
-
-2. It sets up the subpattern as a capturing subpattern (as defined above).
-When the whole pattern matches, that portion of the subject string that matched
-the subpattern is passed back to the caller via the \fIovector\fR argument of
-\fBpcre_exec()\fR. Opening parentheses are counted from left to right (starting
-from 1) to obtain the numbers of the capturing subpatterns.
-
-For example, if the string "the red king" is matched against the pattern
-
-  the ((red|white) (king|queen))
-
-the captured substrings are "red king", "red", and "king", and are numbered 1,
-2, and 3.
-
-The fact that plain parentheses fulfil two functions is not always helpful.
-There are often times when a grouping subpattern is required without a
-capturing requirement. If an opening parenthesis is followed by "?:", the
-subpattern does not do any capturing, and is not counted when computing the
-number of any subsequent capturing subpatterns. For example, if the string "the
-white queen" is matched against the pattern
-
-  the ((?:red|white) (king|queen))
-
-the captured substrings are "white queen" and "queen", and are numbered 1 and
-2. The maximum number of captured substrings is 99, and the maximum number of
-all subpatterns, both capturing and non-capturing, is 200.
-
-As a convenient shorthand, if any option settings are required at the start of
-a non-capturing subpattern, the option letters may appear between the "?" and
-the ":". Thus the two patterns
-
-  (?i:saturday|sunday)
-  (?:(?i)saturday|sunday)
-
-match exactly the same set of strings. Because alternative branches are tried
-from left to right, and options are not reset until the end of the subpattern
-is reached, an option setting in one branch does affect subsequent branches, so
-the above patterns match "SUNDAY" as well as "Saturday".
-
-
-.SH REPETITION
-Repetition is specified by quantifiers, which can follow any of the following
-items:
-
-  a single character, possibly escaped
-  the . metacharacter
-  a character class
-  a back reference (see next section)
-  a parenthesized subpattern (unless it is an assertion - see below)
-
-The general repetition quantifier specifies a minimum and maximum number of
-permitted matches, by giving the two numbers in curly brackets (braces),
-separated by a comma. The numbers must be less than 65536, and the first must
-be less than or equal to the second. For example:
-
-  z{2,4}
-
-matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special
-character. If the second number is omitted, but the comma is present, there is
-no upper limit; if the second number and the comma are both omitted, the
-quantifier specifies an exact number of required matches. Thus
-
-  [aeiou]{3,}
-
-matches at least 3 successive vowels, but may match many more, while
-
-  \\d{8}
-
-matches exactly 8 digits. An opening curly bracket that appears in a position
-where a quantifier is not allowed, or one that does not match the syntax of a
-quantifier, is taken as a literal character. For example, {,6} is not a
-quantifier, but a literal string of four characters.
-
-The quantifier {0} is permitted, causing the expression to behave as if the
-previous item and the quantifier were not present.
-
-For convenience (and historical compatibility) the three most common
-quantifiers have single-character abbreviations:
-
-  *    is equivalent to {0,}
-  +    is equivalent to {1,}
-  ?    is equivalent to {0,1}
-
-It is possible to construct infinite loops by following a subpattern that can
-match no characters with a quantifier that has no upper limit, for example:
-
-  (a?)*
-
-Earlier versions of Perl and PCRE used to give an error at compile time for
-such patterns. However, because there are cases where this can be useful, such
-patterns are now accepted, but if any repetition of the subpattern does in fact
-match no characters, the loop is forcibly broken.
-
-By default, the quantifiers are "greedy", that is, they match as much as
-possible (up to the maximum number of permitted times), without causing the
-rest of the pattern to fail. The classic example of where this gives problems
-is in trying to match comments in C programs. These appear between the
-sequences /* and */ and within the sequence, individual * and / characters may
-appear. An attempt to match C comments by applying the pattern
-
-  /\\*.*\\*/
-
-to the string
-
-  /* first command */  not comment  /* second comment */
-
-fails, because it matches the entire string owing to the greediness of the .*
-item.
-
-However, if a quantifier is followed by a question mark, it ceases to be
-greedy, and instead matches the minimum number of times possible, so the
-pattern
-
-  /\\*.*?\\*/
-
-does the right thing with the C comments. The meaning of the various
-quantifiers is not otherwise changed, just the preferred number of matches.
-Do not confuse this use of question mark with its use as a quantifier in its
-own right. Because it has two uses, it can sometimes appear doubled, as in
-
-  \\d??\\d
-
-which matches one digit by preference, but can match two if that is the only
-way the rest of the pattern matches.
-
-If the PCRE_UNGREEDY option is set (an option which is not available in Perl),
-the quantifiers are not greedy by default, but individual ones can be made
-greedy by following them with a question mark. In other words, it inverts the
-default behaviour.
-
-When a parenthesized subpattern is quantified with a minimum repeat count that
-is greater than 1 or with a limited maximum, more store is required for the
-compiled pattern, in proportion to the size of the minimum or maximum.
-
-If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent
-to Perl's /s) is set, thus allowing the . to match newlines, the pattern is
-implicitly anchored, because whatever follows will be tried against every
-character position in the subject string, so there is no point in retrying the
-overall match at any position after the first. PCRE treats such a pattern as
-though it were preceded by \\A. In cases where it is known that the subject
-string contains no newlines, it is worth setting PCRE_DOTALL when the pattern
-begins with .* in order to obtain this optimization, or alternatively using ^
-to indicate anchoring explicitly.
-
-When a capturing subpattern is repeated, the value captured is the substring
-that matched the final iteration. For example, after
-
-  (tweedle[dume]{3}\\s*)+
-
-has matched "tweedledum tweedledee" the value of the captured substring is
-"tweedledee". However, if there are nested capturing subpatterns, the
-corresponding captured values may have been set in previous iterations. For
-example, after
-
-  /(a|(b))+/
-
-matches "aba" the value of the second captured substring is "b".
-
-
-.SH BACK REFERENCES
-Outside a character class, a backslash followed by a digit greater than 0 (and
-possibly further digits) is a back reference to a capturing subpattern earlier
-(i.e. to its left) in the pattern, provided there have been that many previous
-capturing left parentheses.
-
-However, if the decimal number following the backslash is less than 10, it is
-always taken as a back reference, and causes an error only if there are not
-that many capturing left parentheses in the entire pattern. In other words, the
-parentheses that are referenced need not be to the left of the reference for
-numbers less than 10. See the section entitled "Backslash" above for further
-details of the handling of digits following a backslash.
-
-A back reference matches whatever actually matched the capturing subpattern in
-the current subject string, rather than anything matching the subpattern
-itself. So the pattern
-
-  (sens|respons)e and \\1ibility
-
-matches "sense and sensibility" and "response and responsibility", but not
-"sense and responsibility". If caseful matching is in force at the time of the
-back reference, the case of letters is relevant. For example,
-
-  ((?i)rah)\\s+\\1
-
-matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original
-capturing subpattern is matched caselessly.
-
-There may be more than one back reference to the same subpattern. If a
-subpattern has not actually been used in a particular match, any back
-references to it always fail. For example, the pattern
-
-  (a|(bc))\\2
-
-always fails if it starts to match "a" rather than "bc". Because there may be
-up to 99 back references, all digits following the backslash are taken
-as part of a potential back reference number. If the pattern continues with a
-digit character, some delimiter must be used to terminate the back reference.
-If the PCRE_EXTENDED option is set, this can be whitespace. Otherwise an empty
-comment can be used.
-
-A back reference that occurs inside the parentheses to which it refers fails
-when the subpattern is first used, so, for example, (a\\1) never matches.
-However, such references can be useful inside repeated subpatterns. For
-example, the pattern
-
-  (a|b\\1)+
-
-matches any number of "a"s and also "aba", "ababbaa" etc. At each iteration of
-the subpattern, the back reference matches the character string corresponding
-to the previous iteration. In order for this to work, the pattern must be such
-that the first iteration does not need to match the back reference. This can be
-done using alternation, as in the example above, or by a quantifier with a
-minimum of zero.
-
-
-.SH ASSERTIONS
-An assertion is a test on the characters following or preceding the current
-matching point that does not actually consume any characters. The simple
-assertions coded as \\b, \\B, \\A, \\Z, \\z, ^ and $ are described above. More
-complicated assertions are coded as subpatterns. There are two kinds: those
-that look ahead of the current position in the subject string, and those that
-look behind it.
-
-An assertion subpattern is matched in the normal way, except that it does not
-cause the current matching position to be changed. Lookahead assertions start
-with (?= for positive assertions and (?! for negative assertions. For example,
-
-  \\w+(?=;)
-
-matches a word followed by a semicolon, but does not include the semicolon in
-the match, and
-
-  foo(?!bar)
-
-matches any occurrence of "foo" that is not followed by "bar". Note that the
-apparently similar pattern
-
-  (?!foo)bar
-
-does not find an occurrence of "bar" that is preceded by something other than
-"foo"; it finds any occurrence of "bar" whatsoever, because the assertion
-(?!foo) is always true when the next three characters are "bar". A
-lookbehind assertion is needed to achieve this effect.
-
-Lookbehind assertions start with (?<= for positive assertions and (?<! for
-negative assertions. For example,
-
-  (?<!foo)bar
-
-does find an occurrence of "bar" that is not preceded by "foo". The contents of
-a lookbehind assertion are restricted such that all the strings it matches must
-have a fixed length. However, if there are several alternatives, they do not
-all have to have the same fixed length. Thus
-
-  (?<=bullock|donkey)
-
-is permitted, but
-
-  (?<!dogs?|cats?)
-
-causes an error at compile time. Branches that match different length strings
-are permitted only at the top level of a lookbehind assertion. This is an
-extension compared with Perl 5.005, which requires all branches to match the
-same length of string. An assertion such as
-
-  (?<=ab(c|de))
-
-is not permitted, because its single top-level branch can match two different
-lengths, but it is acceptable if rewritten to use two top-level branches:
-
-  (?<=abc|abde)
-
-The implementation of lookbehind assertions is, for each alternative, to
-temporarily move the current position back by the fixed width and then try to
-match. If there are insufficient characters before the current position, the
-match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns
-can be particularly useful for matching at the ends of strings; an example is
-given at the end of the section on once-only subpatterns.
-
-Several assertions (of any sort) may occur in succession. For example,
-
-  (?<=\\d{3})(?<!999)foo
-
-matches "foo" preceded by three digits that are not "999". Notice that each of
-the assertions is applied independently at the same point in the subject
-string. First there is a check that the previous three characters are all
-digits, and then there is a check that the same three characters are not "999".
-This pattern does \fInot\fR match "foo" preceded by six characters, the first
-of which are digits and the last three of which are not "999". For example, it
-doesn't match "123abcfoo". A pattern to do that is
-
-  (?<=\\d{3}...)(?<!999)foo
-
-This time the first assertion looks at the preceding six characters, checking
-that the first three are digits, and then the second assertion checks that the
-preceding three characters are not "999".
-
-Assertions can be nested in any combination. For example,
-
-  (?<=(?<!foo)bar)baz
-
-matches an occurrence of "baz" that is preceded by "bar" which in turn is not
-preceded by "foo", while
-
-  (?<=\\d{3}(?!999)...)foo
-
-is another pattern which matches "foo" preceded by three digits and any three
-characters that are not "999".
-
-Assertion subpatterns are not capturing subpatterns, and may not be repeated,
-because it makes no sense to assert the same thing several times. If any kind
-of assertion contains capturing subpatterns within it, these are counted for
-the purposes of numbering the capturing subpatterns in the whole pattern.
-However, substring capturing is carried out only for positive assertions,
-because it does not make sense for negative assertions.
-
-Assertions count towards the maximum of 200 parenthesized subpatterns.
-
-
-.SH ONCE-ONLY SUBPATTERNS
-With both maximizing and minimizing repetition, failure of what follows
-normally causes the repeated item to be re-evaluated to see if a different
-number of repeats allows the rest of the pattern to match. Sometimes it is
-useful to prevent this, either to change the nature of the match, or to cause
-it fail earlier than it otherwise might, when the author of the pattern knows
-there is no point in carrying on.
-
-Consider, for example, the pattern \\d+foo when applied to the subject line
-
-  123456bar
-
-After matching all 6 digits and then failing to match "foo", the normal
-action of the matcher is to try again with only 5 digits matching the \\d+
-item, and then with 4, and so on, before ultimately failing. Once-only
-subpatterns provide the means for specifying that once a portion of the pattern
-has matched, it is not to be re-evaluated in this way, so the matcher would
-give up immediately on failing to match "foo" the first time. The notation is
-another kind of special parenthesis, starting with (?> as in this example:
-
-  (?>\\d+)bar
-
-This kind of parenthesis "locks up" the  part of the pattern it contains once
-it has matched, and a failure further into the pattern is prevented from
-backtracking into it. Backtracking past it to previous items, however, works as
-normal.
-
-An alternative description is that a subpattern of this type matches the string
-of characters that an identical standalone pattern would match, if anchored at
-the current point in the subject string.
-
-Once-only subpatterns are not capturing subpatterns. Simple cases such as the
-above example can be thought of as a maximizing repeat that must swallow
-everything it can. So, while both \\d+ and \\d+? are prepared to adjust the
-number of digits they match in order to make the rest of the pattern match,
-(?>\\d+) can only match an entire sequence of digits.
-
-This construction can of course contain arbitrarily complicated subpatterns,
-and it can be nested.
-
-Once-only subpatterns can be used in conjunction with lookbehind assertions to
-specify efficient matching at the end of the subject string. Consider a simple
-pattern such as
-
-  abcd$
-
-when applied to a long string which does not match. Because matching proceeds
-from left to right, PCRE will look for each "a" in the subject and then see if
-what follows matches the rest of the pattern. If the pattern is specified as
-
-  ^.*abcd$
-
-the initial .* matches the entire string at first, but when this fails (because
-there is no following "a"), it backtracks to match all but the last character,
-then all but the last two characters, and so on. Once again the search for "a"
-covers the entire string, from right to left, so we are no better off. However,
-if the pattern is written as
-
-  ^(?>.*)(?<=abcd)
-
-there can be no backtracking for the .* item; it can match only the entire
-string. The subsequent lookbehind assertion does a single test on the last four
-characters. If it fails, the match fails immediately. For long strings, this
-approach makes a significant difference to the processing time.
-
-When a pattern contains an unlimited repeat inside a subpattern that can itself
-be repeated an unlimited number of times, the use of a once-only subpattern is
-the only way to avoid some failing matches taking a very long time indeed.
-The pattern
-
-  (\\D+|<\\d+>)*[!?]
-
-matches an unlimited number of substrings that either consist of non-digits, or
-digits enclosed in <>, followed by either ! or ?. When it matches, it runs
-quickly. However, if it is applied to
-
-  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
-
-it takes a long time before reporting failure. This is because the string can
-be divided between the two repeats in a large number of ways, and all have to
-be tried. (The example used [!?] rather than a single character at the end,
-because both PCRE and Perl have an optimization that allows for fast failure
-when a single character is used. They remember the last single character that
-is required for a match, and fail early if it is not present in the string.)
-If the pattern is changed to
-
-  ((?>\\D+)|<\\d+>)*[!?]
-
-sequences of non-digits cannot be broken, and failure happens quickly.
-
-
-.SH CONDITIONAL SUBPATTERNS
-It is possible to cause the matching process to obey a subpattern
-conditionally or to choose between two alternative subpatterns, depending on
-the result of an assertion, or whether a previous capturing subpattern matched
-or not. The two possible forms of conditional subpattern are
-
-  (?(condition)yes-pattern)
-  (?(condition)yes-pattern|no-pattern)
-
-If the condition is satisfied, the yes-pattern is used; otherwise the
-no-pattern (if present) is used. If there are more than two alternatives in the
-subpattern, a compile-time error occurs.
-
-There are two kinds of condition. If the text between the parentheses consists
-of a sequence of digits, the condition is satisfied if the capturing subpattern
-of that number has previously matched. The number must be greater than zero.
-Consider the following pattern, which contains non-significant white space to
-make it more readable (assume the PCRE_EXTENDED option) and to divide it into
-three parts for ease of discussion:
-
-  ( \\( )?    [^()]+    (?(1) \\) )
-
-The first part matches an optional opening parenthesis, and if that
-character is present, sets it as the first captured substring. The second part
-matches one or more characters that are not parentheses. The third part is a
-conditional subpattern that tests whether the first set of parentheses matched
-or not. If they did, that is, if subject started with an opening parenthesis,
-the condition is true, and so the yes-pattern is executed and a closing
-parenthesis is required. Otherwise, since no-pattern is not present, the
-subpattern matches nothing. In other words, this pattern matches a sequence of
-non-parentheses, optionally enclosed in parentheses.
-
-If the condition is not a sequence of digits, it must be an assertion. This may
-be a positive or negative lookahead or lookbehind assertion. Consider this
-pattern, again containing non-significant white space, and with the two
-alternatives on the second line:
-
-  (?(?=[^a-z]*[a-z])
-  \\d{2}-[a-z]{3}-\\d{2}  |  \\d{2}-\\d{2}-\\d{2} )
-
-The condition is a positive lookahead assertion that matches an optional
-sequence of non-letters followed by a letter. In other words, it tests for the
-presence of at least one letter in the subject. If a letter is found, the
-subject is matched against the first alternative; otherwise it is matched
-against the second. This pattern matches strings in one of the two forms
-dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.
-
-
-.SH COMMENTS
-The sequence (?# marks the start of a comment which continues up to the next
-closing parenthesis. Nested parentheses are not permitted. The characters
-that make up a comment play no part in the pattern matching at all.
-
-If the PCRE_EXTENDED option is set, an unescaped # character outside a
-character class introduces a comment that continues up to the next newline
-character in the pattern.
-
-
-.SH RECURSIVE PATTERNS
-Consider the problem of matching a string in parentheses, allowing for
-unlimited nested parentheses. Without the use of recursion, the best that can
-be done is to use a pattern that matches up to some fixed depth of nesting. It
-is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an
-experimental facility that allows regular expressions to recurse (amongst other
-things). It does this by interpolating Perl code in the expression at run time,
-and the code can refer to the expression itself. A Perl pattern to solve the
-parentheses problem can be created like this:
-
-  $re = qr{\\( (?: (?>[^()]+) | (?p{$re}) )* \\)}x;
-
-The (?p{...}) item interpolates Perl code at run time, and in this case refers
-recursively to the pattern in which it appears. Obviously, PCRE cannot support
-the interpolation of Perl code. Instead, the special item (?R) is provided for
-the specific case of recursion. This PCRE pattern solves the parentheses
-problem (assume the PCRE_EXTENDED option is set so that white space is
-ignored):
-
-  \\( ( (?>[^()]+) | (?R) )* \\)
-
-First it matches an opening parenthesis. Then it matches any number of
-substrings which can either be a sequence of non-parentheses, or a recursive
-match of the pattern itself (i.e. a correctly parenthesized substring). Finally
-there is a closing parenthesis.
-
-This particular example pattern contains nested unlimited repeats, and so the
-use of a once-only subpattern for matching strings of non-parentheses is
-important when applying the pattern to strings that do not match. For example,
-when it is applied to
-
-  (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
-
-it yields "no match" quickly. However, if a once-only subpattern is not used,
-the match runs for a very long time indeed because there are so many different
-ways the + and * repeats can carve up the subject, and all have to be tested
-before failure can be reported.
-
-The values set for any capturing subpatterns are those from the outermost level
-of the recursion at which the subpattern value is set. If the pattern above is
-matched against
-
-  (ab(cd)ef)
-
-the value for the capturing parentheses is "ef", which is the last value taken
-on at the top level. If additional parentheses are added, giving
-
-  \\( ( ( (?>[^()]+) | (?R) )* ) \\)
-     ^                        ^
-     ^                        ^
-the string they capture is "ab(cd)ef", the contents of the top level
-parentheses. If there are more than 15 capturing parentheses in a pattern, PCRE
-has to obtain extra memory to store data during a recursion, which it does by
-using \fBpcre_malloc\fR, freeing it via \fBpcre_free\fR afterwards. If no
-memory can be obtained, it saves data for the first 15 capturing parentheses
-only, as there is no way to give an out-of-memory error from within a
-recursion.
-
-
-.SH PERFORMANCE
-Certain items that may appear in patterns are more efficient than others. It is
-more efficient to use a character class like [aeiou] than a set of alternatives
-such as (a|e|i|o|u). In general, the simplest construction that provides the
-required behaviour is usually the most efficient. Jeffrey Friedl's book
-contains a lot of discussion about optimizing regular expressions for efficient
-performance.
-
-When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is
-implicitly anchored by PCRE, since it can match only at the start of a subject
-string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization,
-because the . metacharacter does not then match a newline, and if the subject
-string contains newlines, the pattern may match from the character immediately
-following one of them instead of from the very start. For example, the pattern
-
-  (.*) second
-
-matches the subject "first\\nand second" (where \\n stands for a newline
-character) with the first captured substring being "and". In order to do this,
-PCRE has to retry the match starting after every newline in the subject.
-
-If you are using such a pattern with subject strings that do not contain
-newlines, the best performance is obtained by setting PCRE_DOTALL, or starting
-the pattern with ^.* to indicate explicit anchoring. That saves PCRE from
-having to scan along the subject looking for a newline to restart at.
-
-Beware of patterns that contain nested indefinite repeats. These can take a
-long time to run when applied to a string that does not match. Consider the
-pattern fragment
-
-  (a+)*
-
-This can match "aaaa" in 33 different ways, and this number increases very
-rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4
-times, and for each of those cases other than 0, the + repeats can match
-different numbers of times.) When the remainder of the pattern is such that the
-entire match is going to fail, PCRE has in principle to try every possible
-variation, and this can take an extremely long time.
-
-An optimization catches some of the more simple cases such as
-
-  (a+)*b
-
-where a literal character follows. Before embarking on the standard matching
-procedure, PCRE checks that there is a "b" later in the subject string, and if
-there is not, it fails the match immediately. However, when there is no
-following literal this optimization cannot be used. You can see the difference
-by comparing the behaviour of
-
-  (a+)*\\d
-
-with the pattern above. The former gives a failure almost instantly when
-applied to a whole line of "a" characters, whereas the latter takes an
-appreciable time with strings longer than about 20 characters.
-
-
-.SH UTF-8 SUPPORT
-Starting at release 3.3, PCRE has some support for character strings encoded
-in the UTF-8 format. This is incomplete, and is regarded as experimental. In
-order to use it, you must configure PCRE to include UTF-8 support in the code,
-and, in addition, you must call \fBpcre_compile()\fR with the PCRE_UTF8 option
-flag. When you do this, both the pattern and any subject strings that are
-matched against it are treated as UTF-8 strings instead of just strings of
-bytes, but only in the cases that are mentioned below.
-
-If you compile PCRE with UTF-8 support, but do not use it at run time, the
-library will be a bit bigger, but the additional run time overhead is limited
-to testing the PCRE_UTF8 flag in several places, so should not be very large.
-
-PCRE assumes that the strings it is given contain valid UTF-8 codes. It does
-not diagnose invalid UTF-8 strings. If you pass invalid UTF-8 strings to PCRE,
-the results are undefined.
-
-Running with PCRE_UTF8 set causes these changes in the way PCRE works:
-
-1. In a pattern, the escape sequence \\x{...}, where the contents of the braces
-is a string of hexadecimal digits, is interpreted as a UTF-8 character whose
-code number is the given hexadecimal number, for example: \\x{1234}. This
-inserts from one to six literal bytes into the pattern, using the UTF-8
-encoding. If a non-hexadecimal digit appears between the braces, the item is
-not recognized.
-
-2. The original hexadecimal escape sequence, \\xhh, generates a two-byte UTF-8
-character if its value is greater than 127.
-
-3. Repeat quantifiers are NOT correctly handled if they follow a multibyte
-character. For example, \\x{100}* and \\xc3+ do not work. If you want to
-repeat such characters, you must enclose them in non-capturing parentheses,
-for example (?:\\x{100}), at present.
-
-4. The dot metacharacter matches one UTF-8 character instead of a single byte.
-
-5. Unlike literal UTF-8 characters, the dot metacharacter followed by a
-repeat quantifier does operate correctly on UTF-8 characters instead of
-single bytes.
-
-4. Although the \\x{...} escape is permitted in a character class, characters
-whose values are greater than 255 cannot be included in a class.
-
-5. A class is matched against a UTF-8 character instead of just a single byte,
-but it can match only characters whose values are less than 256. Characters
-with greater values always fail to match a class.
-
-6. Repeated classes work correctly on multiple characters.
-
-7. Classes containing just a single character whose value is greater than 127
-(but less than 256), for example, [\\x80] or [^\\x{93}], do not work because
-these are optimized into single byte matches. In the first case, of course,
-the class brackets are just redundant.
-
-8. Lookbehind assertions move backwards in the subject by a fixed number of
-characters instead of a fixed number of bytes. Simple cases have been tested
-to work correctly, but there may be hidden gotchas herein.
-
-9. The character types such as \\d and \\w do not work correctly with UTF-8
-characters. They continue to test a single byte.
-
-10. Anything not explicitly mentioned here continues to work in bytes rather
-than in characters.
-
-The following UTF-8 features of Perl 5.6 are not implemented:
-
-1. The escape sequence \\C to match a single byte.
-
-2. The use of Unicode tables and properties and escapes \\p, \\P, and \\X.
-
-.SH AUTHOR
-Philip Hazel <ph10@xxxxxxxxx>
-.br
-University Computing Service,
-.br
-New Museums Site,
-.br
-Cambridge CB2 3QG, England.
-.br
-Phone: +44 1223 334714
-
-Last updated: 28 August 2000,
-.br
-  the 250th anniversary of the death of J.S. Bach.
-.br
-Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcre.html b/external/privoxy/pcre/doc/pcre.html
deleted file mode 100644
index b12b212..0000000
--- a/external/privoxy/pcre/doc/pcre.html
+++ /dev/null
@@ -1,2397 +0,0 @@
-<HTML>
-<HEAD>
-<TITLE>pcre specification</TITLE>
-</HEAD>
-<body bgcolor="#FFFFFF" text="#00005A">
-<H1>pcre specification</H1>
-This HTML document has been generated automatically from the original man page.
-If there is any nonsense in it, please consult the man page in case the
-conversion went wrong.
-<UL>
-<LI><A NAME="TOC1" HREF="#SEC1">NAME</A>
-<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A>
-<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A>
-<LI><A NAME="TOC4" HREF="#SEC4">MULTI-THREADING</A>
-<LI><A NAME="TOC5" HREF="#SEC5">COMPILING A PATTERN</A>
-<LI><A NAME="TOC6" HREF="#SEC6">STUDYING A PATTERN</A>
-<LI><A NAME="TOC7" HREF="#SEC7">LOCALE SUPPORT</A>
-<LI><A NAME="TOC8" HREF="#SEC8">INFORMATION ABOUT A PATTERN</A>
-<LI><A NAME="TOC9" HREF="#SEC9">MATCHING A PATTERN</A>
-<LI><A NAME="TOC10" HREF="#SEC10">EXTRACTING CAPTURED SUBSTRINGS</A>
-<LI><A NAME="TOC11" HREF="#SEC11">LIMITATIONS</A>
-<LI><A NAME="TOC12" HREF="#SEC12">DIFFERENCES FROM PERL</A>
-<LI><A NAME="TOC13" HREF="#SEC13">REGULAR EXPRESSION DETAILS</A>
-<LI><A NAME="TOC14" HREF="#SEC14">BACKSLASH</A>
-<LI><A NAME="TOC15" HREF="#SEC15">CIRCUMFLEX AND DOLLAR</A>
-<LI><A NAME="TOC16" HREF="#SEC16">FULL STOP (PERIOD, DOT)</A>
-<LI><A NAME="TOC17" HREF="#SEC17">SQUARE BRACKETS</A>
-<LI><A NAME="TOC18" HREF="#SEC18">POSIX CHARACTER CLASSES</A>
-<LI><A NAME="TOC19" HREF="#SEC19">VERTICAL BAR</A>
-<LI><A NAME="TOC20" HREF="#SEC20">INTERNAL OPTION SETTING</A>
-<LI><A NAME="TOC21" HREF="#SEC21">SUBPATTERNS</A>
-<LI><A NAME="TOC22" HREF="#SEC22">REPETITION</A>
-<LI><A NAME="TOC23" HREF="#SEC23">BACK REFERENCES</A>
-<LI><A NAME="TOC24" HREF="#SEC24">ASSERTIONS</A>
-<LI><A NAME="TOC25" HREF="#SEC25">ONCE-ONLY SUBPATTERNS</A>
-<LI><A NAME="TOC26" HREF="#SEC26">CONDITIONAL SUBPATTERNS</A>
-<LI><A NAME="TOC27" HREF="#SEC27">COMMENTS</A>
-<LI><A NAME="TOC28" HREF="#SEC28">RECURSIVE PATTERNS</A>
-<LI><A NAME="TOC29" HREF="#SEC29">PERFORMANCE</A>
-<LI><A NAME="TOC30" HREF="#SEC30">UTF-8 SUPPORT</A>
-<LI><A NAME="TOC31" HREF="#SEC31">AUTHOR</A>
-</UL>
-<LI><A NAME="SEC1" HREF="#TOC1">NAME</A>
-<P>
-pcre - Perl-compatible regular expressions.
-</P>
-<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A>
-<P>
-<B>#include &#60;pcre.h&#62;</B>
-</P>
-<P>
-<B>pcre *pcre_compile(const char *<I>pattern</I>, int <I>options</I>,</B>
-<B>const char **<I>errptr</I>, int *<I>erroffset</I>,</B>
-<B>const unsigned char *<I>tableptr</I>);</B>
-</P>
-<P>
-<B>pcre_extra *pcre_study(const pcre *<I>code</I>, int <I>options</I>,</B>
-<B>const char **<I>errptr</I>);</B>
-</P>
-<P>
-<B>int pcre_exec(const pcre *<I>code</I>, const pcre_extra *<I>extra</I>,</B>
-<B>const char *<I>subject</I>, int <I>length</I>, int <I>startoffset</I>,</B>
-<B>int <I>options</I>, int *<I>ovector</I>, int <I>ovecsize</I>);</B>
-</P>
-<P>
-<B>int pcre_copy_substring(const char *<I>subject</I>, int *<I>ovector</I>,</B>
-<B>int <I>stringcount</I>, int <I>stringnumber</I>, char *<I>buffer</I>,</B>
-<B>int <I>buffersize</I>);</B>
-</P>
-<P>
-<B>int pcre_get_substring(const char *<I>subject</I>, int *<I>ovector</I>,</B>
-<B>int <I>stringcount</I>, int <I>stringnumber</I>,</B>
-<B>const char **<I>stringptr</I>);</B>
-</P>
-<P>
-<B>int pcre_get_substring_list(const char *<I>subject</I>,</B>
-<B>int *<I>ovector</I>, int <I>stringcount</I>, const char ***<I>listptr</I>);</B>
-</P>
-<P>
-<B>void pcre_free_substring(const char *<I>stringptr</I>);</B>
-</P>
-<P>
-<B>void pcre_free_substring_list(const char **<I>stringptr</I>);</B>
-</P>
-<P>
-<B>const unsigned char *pcre_maketables(void);</B>
-</P>
-<P>
-<B>int pcre_fullinfo(const pcre *<I>code</I>, const pcre_extra *<I>extra</I>,</B>
-<B>int <I>what</I>, void *<I>where</I>);</B>
-</P>
-<P>
-<B>int pcre_info(const pcre *<I>code</I>, int *<I>optptr</I>, int</B>
-<B>*<I>firstcharptr</I>);</B>
-</P>
-<P>
-<B>char *pcre_version(void);</B>
-</P>
-<P>
-<B>void *(*pcre_malloc)(size_t);</B>
-</P>
-<P>
-<B>void (*pcre_free)(void *);</B>
-</P>
-<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A>
-<P>
-The PCRE library is a set of functions that implement regular expression
-pattern matching using the same syntax and semantics as Perl 5, with just a few
-differences (see below). The current implementation corresponds to Perl 5.005,
-with some additional features from later versions. This includes some
-experimental, incomplete support for UTF-8 encoded strings. Details of exactly
-what is and what is not supported are given below.
-</P>
-<P>
-PCRE has its own native API, which is described in this document. There is also
-a set of wrapper functions that correspond to the POSIX regular expression API.
-These are described in the <B>pcreposix</B> documentation.
-</P>
-<P>
-The native API function prototypes are defined in the header file <B>pcre.h</B>,
-and on Unix systems the library itself is called <B>libpcre.a</B>, so can be
-accessed by adding <B>-lpcre</B> to the command for linking an application which
-calls it. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to
-contain the major and minor release numbers for the library. Applications can
-use these to include support for different releases.
-</P>
-<P>
-The functions <B>pcre_compile()</B>, <B>pcre_study()</B>, and <B>pcre_exec()</B>
-are used for compiling and matching regular expressions.
-</P>
-<P>
-The functions <B>pcre_copy_substring()</B>, <B>pcre_get_substring()</B>, and
-<B>pcre_get_substring_list()</B> are convenience functions for extracting
-captured substrings from a matched subject string; <B>pcre_free_substring()</B>
-and <B>pcre_free_substring_list()</B> are also provided, to free the memory used
-for extracted strings.
-</P>
-<P>
-The function <B>pcre_maketables()</B> is used (optionally) to build a set of
-character tables in the current locale for passing to <B>pcre_compile()</B>.
-</P>
-<P>
-The function <B>pcre_fullinfo()</B> is used to find out information about a
-compiled pattern; <B>pcre_info()</B> is an obsolete version which returns only
-some of the available information, but is retained for backwards compatibility.
-The function <B>pcre_version()</B> returns a pointer to a string containing the
-version of PCRE and its date of release.
-</P>
-<P>
-The global variables <B>pcre_malloc</B> and <B>pcre_free</B> initially contain
-the entry points of the standard <B>malloc()</B> and <B>free()</B> functions
-respectively. PCRE calls the memory management functions via these variables,
-so a calling program can replace them if it wishes to intercept the calls. This
-should be done before calling any PCRE functions.
-</P>
-<LI><A NAME="SEC4" HREF="#TOC1">MULTI-THREADING</A>
-<P>
-The PCRE functions can be used in multi-threading applications, with the
-proviso that the memory management functions pointed to by <B>pcre_malloc</B>
-and <B>pcre_free</B> are shared by all threads.
-</P>
-<P>
-The compiled form of a regular expression is not altered during matching, so
-the same compiled pattern can safely be used by several threads at once.
-</P>
-<LI><A NAME="SEC5" HREF="#TOC1">COMPILING A PATTERN</A>
-<P>
-The function <B>pcre_compile()</B> is called to compile a pattern into an
-internal form. The pattern is a C string terminated by a binary zero, and
-is passed in the argument <I>pattern</I>. A pointer to a single block of memory
-that is obtained via <B>pcre_malloc</B> is returned. This contains the
-compiled code and related data. The <B>pcre</B> type is defined for this for
-convenience, but in fact <B>pcre</B> is just a typedef for <B>void</B>, since the
-contents of the block are not externally defined. It is up to the caller to
-free the memory when it is no longer required.
-</P>
-<P>
-The size of a compiled pattern is roughly proportional to the length of the
-pattern string, except that each character class (other than those containing
-just a single character, negated or not) requires 33 bytes, and repeat
-quantifiers with a minimum greater than one or a bounded maximum cause the
-relevant portions of the compiled pattern to be replicated.
-</P>
-<P>
-The <I>options</I> argument contains independent bits that affect the
-compilation. It should be zero if no options are required. Some of the options,
-in particular, those that are compatible with Perl, can also be set and unset
-from within the pattern (see the detailed description of regular expressions
-below). For these options, the contents of the <I>options</I> argument specifies
-their initial settings at the start of compilation and execution. The
-PCRE_ANCHORED option can be set at the time of matching as well as at compile
-time.
-</P>
-<P>
-If <I>errptr</I> is NULL, <B>pcre_compile()</B> returns NULL immediately.
-Otherwise, if compilation of a pattern fails, <B>pcre_compile()</B> returns
-NULL, and sets the variable pointed to by <I>errptr</I> to point to a textual
-error message. The offset from the start of the pattern to the character where
-the error was discovered is placed in the variable pointed to by
-<I>erroffset</I>, which must not be NULL. If it is, an immediate error is given.
-</P>
-<P>
-If the final argument, <I>tableptr</I>, is NULL, PCRE uses a default set of
-character tables which are built when it is compiled, using the default C
-locale. Otherwise, <I>tableptr</I> must be the result of a call to
-<B>pcre_maketables()</B>. See the section on locale support below.
-</P>
-<P>
-The following option bits are defined in the header file:
-</P>
-<P>
-<PRE>
-  PCRE_ANCHORED
-</PRE>
-</P>
-<P>
-If this bit is set, the pattern is forced to be "anchored", that is, it is
-constrained to match only at the start of the string which is being searched
-(the "subject string"). This effect can also be achieved by appropriate
-constructs in the pattern itself, which is the only way to do it in Perl.
-</P>
-<P>
-<PRE>
-  PCRE_CASELESS
-</PRE>
-</P>
-<P>
-If this bit is set, letters in the pattern match both upper and lower case
-letters. It is equivalent to Perl's /i option.
-</P>
-<P>
-<PRE>
-  PCRE_DOLLAR_ENDONLY
-</PRE>
-</P>
-<P>
-If this bit is set, a dollar metacharacter in the pattern matches only at the
-end of the subject string. Without this option, a dollar also matches
-immediately before the final character if it is a newline (but not before any
-other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is
-set. There is no equivalent to this option in Perl.
-</P>
-<P>
-<PRE>
-  PCRE_DOTALL
-</PRE>
-</P>
-<P>
-If this bit is set, a dot metacharater in the pattern matches all characters,
-including newlines. Without it, newlines are excluded. This option is
-equivalent to Perl's /s option. A negative class such as [^a] always matches a
-newline character, independent of the setting of this option.
-</P>
-<P>
-<PRE>
-  PCRE_EXTENDED
-</PRE>
-</P>
-<P>
-If this bit is set, whitespace data characters in the pattern are totally
-ignored except when escaped or inside a character class, and characters between
-an unescaped # outside a character class and the next newline character,
-inclusive, are also ignored. This is equivalent to Perl's /x option, and makes
-it possible to include comments inside complicated patterns. Note, however,
-that this applies only to data characters. Whitespace characters may never
-appear within special character sequences in a pattern, for example within the
-sequence (?( which introduces a conditional subpattern.
-</P>
-<P>
-<PRE>
-  PCRE_EXTRA
-</PRE>
-</P>
-<P>
-This option was invented in order to turn on additional functionality of PCRE
-that is incompatible with Perl, but it is currently of very little use. When
-set, any backslash in a pattern that is followed by a letter that has no
-special meaning causes an error, thus reserving these combinations for future
-expansion. By default, as in Perl, a backslash followed by a letter with no
-special meaning is treated as a literal. There are at present no other features
-controlled by this option. It can also be set by a (?X) option setting within a
-pattern.
-</P>
-<P>
-<PRE>
-  PCRE_MULTILINE
-</PRE>
-</P>
-<P>
-By default, PCRE treats the subject string as consisting of a single "line" of
-characters (even if it actually contains several newlines). The "start of line"
-metacharacter (^) matches only at the start of the string, while the "end of
-line" metacharacter ($) matches only at the end of the string, or before a
-terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as
-Perl.
-</P>
-<P>
-When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs
-match immediately following or immediately before any newline in the subject
-string, respectively, as well as at the very start and end. This is equivalent
-to Perl's /m option. If there are no "\n" characters in a subject string, or
-no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no
-effect.
-</P>
-<P>
-<PRE>
-  PCRE_UNGREEDY
-</PRE>
-</P>
-<P>
-This option inverts the "greediness" of the quantifiers so that they are not
-greedy by default, but become greedy if followed by "?". It is not compatible
-with Perl. It can also be set by a (?U) option setting within the pattern.
-</P>
-<P>
-<PRE>
-  PCRE_UTF8
-</PRE>
-</P>
-<P>
-This option causes PCRE to regard both the pattern and the subject as strings
-of UTF-8 characters instead of just byte strings. However, it is available only
-if PCRE has been built to include UTF-8 support. If not, the use of this option
-provokes an error. Support for UTF-8 is new, experimental, and incomplete.
-Details of exactly what it entails are given below.
-</P>
-<LI><A NAME="SEC6" HREF="#TOC1">STUDYING A PATTERN</A>
-<P>
-When a pattern is going to be used several times, it is worth spending more
-time analyzing it in order to speed up the time taken for matching. The
-function <B>pcre_study()</B> takes a pointer to a compiled pattern as its first
-argument, and returns a pointer to a <B>pcre_extra</B> block (another <B>void</B>
-typedef) containing additional information about the pattern; this can be
-passed to <B>pcre_exec()</B>. If no additional information is available, NULL
-is returned.
-</P>
-<P>
-The second argument contains option bits. At present, no options are defined
-for <B>pcre_study()</B>, and this argument should always be zero.
-</P>
-<P>
-The third argument for <B>pcre_study()</B> is a pointer to an error message. If
-studying succeeds (even if no data is returned), the variable it points to is
-set to NULL. Otherwise it points to a textual error message.
-</P>
-<P>
-At present, studying a pattern is useful only for non-anchored patterns that do
-not have a single fixed starting character. A bitmap of possible starting
-characters is created.
-</P>
-<LI><A NAME="SEC7" HREF="#TOC1">LOCALE SUPPORT</A>
-<P>
-PCRE handles caseless matching, and determines whether characters are letters,
-digits, or whatever, by reference to a set of tables. The library contains a
-default set of tables which is created in the default C locale when PCRE is
-compiled. This is used when the final argument of <B>pcre_compile()</B> is NULL,
-and is sufficient for many applications.
-</P>
-<P>
-An alternative set of tables can, however, be supplied. Such tables are built
-by calling the <B>pcre_maketables()</B> function, which has no arguments, in the
-relevant locale. The result can then be passed to <B>pcre_compile()</B> as often
-as necessary. For example, to build and use tables that are appropriate for the
-French locale (where accented characters with codes greater than 128 are
-treated as letters), the following code could be used:
-</P>
-<P>
-<PRE>
-  setlocale(LC_CTYPE, "fr");
-  tables = pcre_maketables();
-  re = pcre_compile(..., tables);
-</PRE>
-</P>
-<P>
-The tables are built in memory that is obtained via <B>pcre_malloc</B>. The
-pointer that is passed to <B>pcre_compile</B> is saved with the compiled
-pattern, and the same tables are used via this pointer by <B>pcre_study()</B>
-and <B>pcre_exec()</B>. Thus for any single pattern, compilation, studying and
-matching all happen in the same locale, but different patterns can be compiled
-in different locales. It is the caller's responsibility to ensure that the
-memory containing the tables remains available for as long as it is needed.
-</P>
-<LI><A NAME="SEC8" HREF="#TOC1">INFORMATION ABOUT A PATTERN</A>
-<P>
-The <B>pcre_fullinfo()</B> function returns information about a compiled
-pattern. It replaces the obsolete <B>pcre_info()</B> function, which is
-nevertheless retained for backwards compability (and is documented below).
-</P>
-<P>
-The first argument for <B>pcre_fullinfo()</B> is a pointer to the compiled
-pattern. The second argument is the result of <B>pcre_study()</B>, or NULL if
-the pattern was not studied. The third argument specifies which piece of
-information is required, while the fourth argument is a pointer to a variable
-to receive the data. The yield of the function is zero for success, or one of
-the following negative numbers:
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NULL       the argument <I>code</I> was NULL
-                        the argument <I>where</I> was NULL
-  PCRE_ERROR_BADMAGIC   the "magic number" was not found
-  PCRE_ERROR_BADOPTION  the value of <I>what</I> was invalid
-</PRE>
-</P>
-<P>
-The possible values for the third argument are defined in <B>pcre.h</B>, and are
-as follows:
-</P>
-<P>
-<PRE>
-  PCRE_INFO_OPTIONS
-</PRE>
-</P>
-<P>
-Return a copy of the options with which the pattern was compiled. The fourth
-argument should point to au <B>unsigned long int</B> variable. These option bits
-are those specified in the call to <B>pcre_compile()</B>, modified by any
-top-level option settings within the pattern itself, and with the PCRE_ANCHORED
-bit forcibly set if the form of the pattern implies that it can match only at
-the start of a subject string.
-</P>
-<P>
-<PRE>
-  PCRE_INFO_SIZE
-</PRE>
-</P>
-<P>
-Return the size of the compiled pattern, that is, the value that was passed as
-the argument to <B>pcre_malloc()</B> when PCRE was getting memory in which to
-place the compiled data. The fourth argument should point to a <B>size_t</B>
-variable.
-</P>
-<P>
-<PRE>
-  PCRE_INFO_CAPTURECOUNT
-</PRE>
-</P>
-<P>
-Return the number of capturing subpatterns in the pattern. The fourth argument
-should point to an \fbint\fR variable.
-</P>
-<P>
-<PRE>
-  PCRE_INFO_BACKREFMAX
-</PRE>
-</P>
-<P>
-Return the number of the highest back reference in the pattern. The fourth
-argument should point to an <B>int</B> variable. Zero is returned if there are
-no back references.
-</P>
-<P>
-<PRE>
-  PCRE_INFO_FIRSTCHAR
-</PRE>
-</P>
-<P>
-Return information about the first character of any matched string, for a
-non-anchored pattern. If there is a fixed first character, e.g. from a pattern
-such as (cat|cow|coyote), it is returned in the integer pointed to by
-<I>where</I>. Otherwise, if either
-</P>
-<P>
-(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch
-starts with "^", or
-</P>
-<P>
-(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set
-(if it were set, the pattern would be anchored),
-</P>
-<P>
--1 is returned, indicating that the pattern matches only at the start of a
-subject string or after any "\n" within the string. Otherwise -2 is returned.
-For anchored patterns, -2 is returned.
-</P>
-<P>
-<PRE>
-  PCRE_INFO_FIRSTTABLE
-</PRE>
-</P>
-<P>
-If the pattern was studied, and this resulted in the construction of a 256-bit
-table indicating a fixed set of characters for the first character in any
-matching string, a pointer to the table is returned. Otherwise NULL is
-returned. The fourth argument should point to an <B>unsigned char *</B>
-variable.
-</P>
-<P>
-<PRE>
-  PCRE_INFO_LASTLITERAL
-</PRE>
-</P>
-<P>
-For a non-anchored pattern, return the value of the rightmost literal character
-which must exist in any matched string, other than at its start. The fourth
-argument should point to an <B>int</B> variable. If there is no such character,
-or if the pattern is anchored, -1 is returned. For example, for the pattern
-/a\d+z\d+/ the returned value is 'z'.
-</P>
-<P>
-The <B>pcre_info()</B> function is now obsolete because its interface is too
-restrictive to return all the available data about a compiled pattern. New
-programs should use <B>pcre_fullinfo()</B> instead. The yield of
-<B>pcre_info()</B> is the number of capturing subpatterns, or one of the
-following negative numbers:
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NULL       the argument <I>code</I> was NULL
-  PCRE_ERROR_BADMAGIC   the "magic number" was not found
-</PRE>
-</P>
-<P>
-If the <I>optptr</I> argument is not NULL, a copy of the options with which the
-pattern was compiled is placed in the integer it points to (see
-PCRE_INFO_OPTIONS above).
-</P>
-<P>
-If the pattern is not anchored and the <I>firstcharptr</I> argument is not NULL,
-it is used to pass back information about the first character of any matched
-string (see PCRE_INFO_FIRSTCHAR above).
-</P>
-<LI><A NAME="SEC9" HREF="#TOC1">MATCHING A PATTERN</A>
-<P>
-The function <B>pcre_exec()</B> is called to match a subject string against a
-pre-compiled pattern, which is passed in the <I>code</I> argument. If the
-pattern has been studied, the result of the study should be passed in the
-<I>extra</I> argument. Otherwise this must be NULL.
-</P>
-<P>
-The PCRE_ANCHORED option can be passed in the <I>options</I> argument, whose
-unused bits must be zero. However, if a pattern was compiled with
-PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it
-cannot be made unachored at matching time.
-</P>
-<P>
-There are also three further options that can be set only at matching time:
-</P>
-<P>
-<PRE>
-  PCRE_NOTBOL
-</PRE>
-</P>
-<P>
-The first character of the string is not the beginning of a line, so the
-circumflex metacharacter should not match before it. Setting this without
-PCRE_MULTILINE (at compile time) causes circumflex never to match.
-</P>
-<P>
-<PRE>
-  PCRE_NOTEOL
-</PRE>
-</P>
-<P>
-The end of the string is not the end of a line, so the dollar metacharacter
-should not match it nor (except in multiline mode) a newline immediately before
-it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never
-to match.
-</P>
-<P>
-<PRE>
-  PCRE_NOTEMPTY
-</PRE>
-</P>
-<P>
-An empty string is not considered to be a valid match if this option is set. If
-there are alternatives in the pattern, they are tried. If all the alternatives
-match the empty string, the entire match fails. For example, if the pattern
-</P>
-<P>
-<PRE>
-  a?b?
-</PRE>
-</P>
-<P>
-is applied to a string not beginning with "a" or "b", it matches the empty
-string at the start of the subject. With PCRE_NOTEMPTY set, this match is not
-valid, so PCRE searches further into the string for occurrences of "a" or "b".
-</P>
-<P>
-Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case
-of a pattern match of the empty string within its <B>split()</B> function, and
-when using the /g modifier. It is possible to emulate Perl's behaviour after
-matching a null string by first trying the match again at the same offset with
-PCRE_NOTEMPTY set, and then if that fails by advancing the starting offset (see
-below) and trying an ordinary match again.
-</P>
-<P>
-The subject string is passed as a pointer in <I>subject</I>, a length in
-<I>length</I>, and a starting offset in <I>startoffset</I>. Unlike the pattern
-string, it may contain binary zero characters. When the starting offset is
-zero, the search for a match starts at the beginning of the subject, and this
-is by far the most common case.
-</P>
-<P>
-A non-zero starting offset is useful when searching for another match in the
-same subject by calling <B>pcre_exec()</B> again after a previous success.
-Setting <I>startoffset</I> differs from just passing over a shortened string and
-setting PCRE_NOTBOL in the case of a pattern that begins with any kind of
-lookbehind. For example, consider the pattern
-</P>
-<P>
-<PRE>
-  \Biss\B
-</PRE>
-</P>
-<P>
-which finds occurrences of "iss" in the middle of words. (\B matches only if
-the current position in the subject is not a word boundary.) When applied to
-the string "Mississipi" the first call to <B>pcre_exec()</B> finds the first
-occurrence. If <B>pcre_exec()</B> is called again with just the remainder of the
-subject, namely "issipi", it does not match, because \B is always false at the
-start of the subject, which is deemed to be a word boundary. However, if
-<B>pcre_exec()</B> is passed the entire string again, but with <I>startoffset</I>
-set to 4, it finds the second occurrence of "iss" because it is able to look
-behind the starting point to discover that it is preceded by a letter.
-</P>
-<P>
-If a non-zero starting offset is passed when the pattern is anchored, one
-attempt to match at the given offset is tried. This can only succeed if the
-pattern does not require the match to be at the start of the subject.
-</P>
-<P>
-In general, a pattern matches a certain portion of the subject, and in
-addition, further substrings from the subject may be picked out by parts of the
-pattern. Following the usage in Jeffrey Friedl's book, this is called
-"capturing" in what follows, and the phrase "capturing subpattern" is used for
-a fragment of a pattern that picks out a substring. PCRE supports several other
-kinds of parenthesized subpattern that do not cause substrings to be captured.
-</P>
-<P>
-Captured substrings are returned to the caller via a vector of integer offsets
-whose address is passed in <I>ovector</I>. The number of elements in the vector
-is passed in <I>ovecsize</I>. The first two-thirds of the vector is used to pass
-back captured substrings, each substring using a pair of integers. The
-remaining third of the vector is used as workspace by <B>pcre_exec()</B> while
-matching capturing subpatterns, and is not available for passing back
-information. The length passed in <I>ovecsize</I> should always be a multiple of
-three. If it is not, it is rounded down.
-</P>
-<P>
-When a match has been successful, information about captured substrings is
-returned in pairs of integers, starting at the beginning of <I>ovector</I>, and
-continuing up to two-thirds of its length at the most. The first element of a
-pair is set to the offset of the first character in a substring, and the second
-is set to the offset of the first character after the end of a substring. The
-first pair, <I>ovector[0]</I> and <I>ovector[1]</I>, identify the portion of the
-subject string matched by the entire pattern. The next pair is used for the
-first capturing subpattern, and so on. The value returned by <B>pcre_exec()</B>
-is the number of pairs that have been set. If there are no capturing
-subpatterns, the return value from a successful match is 1, indicating that
-just the first pair of offsets has been set.
-</P>
-<P>
-Some convenience functions are provided for extracting the captured substrings
-as separate strings. These are described in the following section.
-</P>
-<P>
-It is possible for an capturing subpattern number <I>n+1</I> to match some
-part of the subject when subpattern <I>n</I> has not been used at all. For
-example, if the string "abc" is matched against the pattern (a|(z))(bc)
-subpatterns 1 and 3 are matched, but 2 is not. When this happens, both offset
-values corresponding to the unused subpattern are set to -1.
-</P>
-<P>
-If a capturing subpattern is matched repeatedly, it is the last portion of the
-string that it matched that gets returned.
-</P>
-<P>
-If the vector is too small to hold all the captured substrings, it is used as
-far as possible (up to two-thirds of its length), and the function returns a
-value of zero. In particular, if the substring offsets are not of interest,
-<B>pcre_exec()</B> may be called with <I>ovector</I> passed as NULL and
-<I>ovecsize</I> as zero. However, if the pattern contains back references and
-the <I>ovector</I> isn't big enough to remember the related substrings, PCRE has
-to get additional memory for use during matching. Thus it is usually advisable
-to supply an <I>ovector</I>.
-</P>
-<P>
-Note that <B>pcre_info()</B> can be used to find out how many capturing
-subpatterns there are in a compiled pattern. The smallest size for
-<I>ovector</I> that will allow for <I>n</I> captured substrings in addition to
-the offsets of the substring matched by the whole pattern is (<I>n</I>+1)*3.
-</P>
-<P>
-If <B>pcre_exec()</B> fails, it returns a negative number. The following are
-defined in the header file:
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NOMATCH        (-1)
-</PRE>
-</P>
-<P>
-The subject string did not match the pattern.
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NULL           (-2)
-</PRE>
-</P>
-<P>
-Either <I>code</I> or <I>subject</I> was passed as NULL, or <I>ovector</I> was
-NULL and <I>ovecsize</I> was not zero.
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_BADOPTION      (-3)
-</PRE>
-</P>
-<P>
-An unrecognized bit was set in the <I>options</I> argument.
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_BADMAGIC       (-4)
-</PRE>
-</P>
-<P>
-PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch
-the case when it is passed a junk pointer. This is the error it gives when the
-magic number isn't present.
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_UNKNOWN_NODE   (-5)
-</PRE>
-</P>
-<P>
-While running the pattern match, an unknown item was encountered in the
-compiled pattern. This error could be caused by a bug in PCRE or by overwriting
-of the compiled pattern.
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NOMEMORY       (-6)
-</PRE>
-</P>
-<P>
-If a pattern contains back references, but the <I>ovector</I> that is passed to
-<B>pcre_exec()</B> is not big enough to remember the referenced substrings, PCRE
-gets a block of memory at the start of matching to use for this purpose. If the
-call via <B>pcre_malloc()</B> fails, this error is given. The memory is freed at
-the end of matching.
-</P>
-<LI><A NAME="SEC10" HREF="#TOC1">EXTRACTING CAPTURED SUBSTRINGS</A>
-<P>
-Captured substrings can be accessed directly by using the offsets returned by
-<B>pcre_exec()</B> in <I>ovector</I>. For convenience, the functions
-<B>pcre_copy_substring()</B>, <B>pcre_get_substring()</B>, and
-<B>pcre_get_substring_list()</B> are provided for extracting captured substrings
-as new, separate, zero-terminated strings. A substring that contains a binary
-zero is correctly extracted and has a further zero added on the end, but the
-result does not, of course, function as a C string.
-</P>
-<P>
-The first three arguments are the same for all three functions: <I>subject</I>
-is the subject string which has just been successfully matched, <I>ovector</I>
-is a pointer to the vector of integer offsets that was passed to
-<B>pcre_exec()</B>, and <I>stringcount</I> is the number of substrings that
-were captured by the match, including the substring that matched the entire
-regular expression. This is the value returned by <B>pcre_exec</B> if it
-is greater than zero. If <B>pcre_exec()</B> returned zero, indicating that it
-ran out of space in <I>ovector</I>, the value passed as <I>stringcount</I> should
-be the size of the vector divided by three.
-</P>
-<P>
-The functions <B>pcre_copy_substring()</B> and <B>pcre_get_substring()</B>
-extract a single substring, whose number is given as <I>stringnumber</I>. A
-value of zero extracts the substring that matched the entire pattern, while
-higher values extract the captured substrings. For <B>pcre_copy_substring()</B>,
-the string is placed in <I>buffer</I>, whose length is given by
-<I>buffersize</I>, while for <B>pcre_get_substring()</B> a new block of memory is
-obtained via <B>pcre_malloc</B>, and its address is returned via
-<I>stringptr</I>. The yield of the function is the length of the string, not
-including the terminating zero, or one of
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NOMEMORY       (-6)
-</PRE>
-</P>
-<P>
-The buffer was too small for <B>pcre_copy_substring()</B>, or the attempt to get
-memory failed for <B>pcre_get_substring()</B>.
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NOSUBSTRING    (-7)
-</PRE>
-</P>
-<P>
-There is no substring whose number is <I>stringnumber</I>.
-</P>
-<P>
-The <B>pcre_get_substring_list()</B> function extracts all available substrings
-and builds a list of pointers to them. All this is done in a single block of
-memory which is obtained via <B>pcre_malloc</B>. The address of the memory block
-is returned via <I>listptr</I>, which is also the start of the list of string
-pointers. The end of the list is marked by a NULL pointer. The yield of the
-function is zero if all went well, or
-</P>
-<P>
-<PRE>
-  PCRE_ERROR_NOMEMORY       (-6)
-</PRE>
-</P>
-<P>
-if the attempt to get the memory block failed.
-</P>
-<P>
-When any of these functions encounter a substring that is unset, which can
-happen when capturing subpattern number <I>n+1</I> matches some part of the
-subject, but subpattern <I>n</I> has not been used at all, they return an empty
-string. This can be distinguished from a genuine zero-length substring by
-inspecting the appropriate offset in <I>ovector</I>, which is negative for unset
-substrings.
-</P>
-<P>
-The two convenience functions <B>pcre_free_substring()</B> and
-<B>pcre_free_substring_list()</B> can be used to free the memory returned by
-a previous call of <B>pcre_get_substring()</B> or
-<B>pcre_get_substring_list()</B>, respectively. They do nothing more than call
-the function pointed to by <B>pcre_free</B>, which of course could be called
-directly from a C program. However, PCRE is used in some situations where it is
-linked via a special interface to another programming language which cannot use
-<B>pcre_free</B> directly; it is for these cases that the functions are
-provided.
-</P>
-<LI><A NAME="SEC11" HREF="#TOC1">LIMITATIONS</A>
-<P>
-There are some size limitations in PCRE but it is hoped that they will never in
-practice be relevant.
-The maximum length of a compiled pattern is 65539 (sic) bytes.
-All values in repeating quantifiers must be less than 65536.
-The maximum number of capturing subpatterns is 99.
-The maximum number of all parenthesized subpatterns, including capturing
-subpatterns, assertions, and other types of subpattern, is 200.
-</P>
-<P>
-The maximum length of a subject string is the largest positive number that an
-integer variable can hold. However, PCRE uses recursion to handle subpatterns
-and indefinite repetition. This means that the available stack space may limit
-the size of a subject string that can be processed by certain patterns.
-</P>
-<LI><A NAME="SEC12" HREF="#TOC1">DIFFERENCES FROM PERL</A>
-<P>
-The differences described here are with respect to Perl 5.005.
-</P>
-<P>
-1. By default, a whitespace character is any character that the C library
-function <B>isspace()</B> recognizes, though it is possible to compile PCRE with
-alternative character type tables. Normally <B>isspace()</B> matches space,
-formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5
-no longer includes vertical tab in its set of whitespace characters. The \v
-escape that was in the Perl documentation for a long time was never in fact
-recognized. However, the character itself was treated as whitespace at least
-up to 5.002. In 5.004 and 5.005 it does not match \s.
-</P>
-<P>
-2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits
-them, but they do not mean what you might think. For example, (?!a){3} does
-not assert that the next three characters are not "a". It just asserts that the
-next character is not "a" three times.
-</P>
-<P>
-3. Capturing subpatterns that occur inside negative lookahead assertions are
-counted, but their entries in the offsets vector are never set. Perl sets its
-numerical variables from any such patterns that are matched before the
-assertion fails to match something (thereby succeeding), but only if the
-negative lookahead assertion contains just one branch.
-</P>
-<P>
-4. Though binary zero characters are supported in the subject string, they are
-not allowed in a pattern string because it is passed as a normal C string,
-terminated by zero. The escape sequence "\0" can be used in the pattern to
-represent a binary zero.
-</P>
-<P>
-5. The following Perl escape sequences are not supported: \l, \u, \L, \U,
-\E, \Q. In fact these are implemented by Perl's general string-handling and
-are not part of its pattern matching engine.
-</P>
-<P>
-6. The Perl \G assertion is not supported as it is not relevant to single
-pattern matches.
-</P>
-<P>
-7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code})
-constructions. However, there is some experimental support for recursive
-patterns using the non-Perl item (?R).
-</P>
-<P>
-8. There are at the time of writing some oddities in Perl 5.005_02 concerned
-with the settings of captured strings when part of a pattern is repeated. For
-example, matching "aba" against the pattern /^(a(b)?)+$/ sets $2 to the value
-"b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves $2 unset. However, if
-the pattern is changed to /^(aa(b(b))?)+$/ then $2 (and $3) are set.
-</P>
-<P>
-In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the
-future Perl changes to a consistent state that is different, PCRE may change to
-follow.
-</P>
-<P>
-9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern
-/^(a)?(?(1)a|b)+$/ matches the string "a", whereas in PCRE it does not.
-However, in both Perl and PCRE /^(a)?a/ matched against "a" leaves $1 unset.
-</P>
-<P>
-10. PCRE provides some extensions to the Perl regular expression facilities:
-</P>
-<P>
-(a) Although lookbehind assertions must match fixed length strings, each
-alternative branch of a lookbehind assertion can match a different length of
-string. Perl 5.005 requires them all to have the same length.
-</P>
-<P>
-(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta-
-character matches only at the very end of the string.
-</P>
-<P>
-(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special
-meaning is faulted.
-</P>
-<P>
-(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is
-inverted, that is, by default they are not greedy, but if followed by a
-question mark they are.
-</P>
-<P>
-(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start
-of the subject.
-</P>
-<P>
-(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for
-<B>pcre_exec()</B> have no Perl equivalents.
-</P>
-<P>
-(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do
-this using the (?p{code}) construct, which PCRE cannot of course support.)
-</P>
-<LI><A NAME="SEC13" HREF="#TOC1">REGULAR EXPRESSION DETAILS</A>
-<P>
-The syntax and semantics of the regular expressions supported by PCRE are
-described below. Regular expressions are also described in the Perl
-documentation and in a number of other books, some of which have copious
-examples. Jeffrey Friedl's "Mastering Regular Expressions", published by
-O'Reilly (ISBN 1-56592-257), covers them in great detail.
-</P>
-<P>
-The description here is intended as reference documentation. The basic
-operation of PCRE is on strings of bytes. However, there is the beginnings of
-some support for UTF-8 character strings. To use this support you must
-configure PCRE to include it, and then call <B>pcre_compile()</B> with the
-PCRE_UTF8 option. How this affects the pattern matching is described in the
-final section of this document.
-</P>
-<P>
-A regular expression is a pattern that is matched against a subject string from
-left to right. Most characters stand for themselves in a pattern, and match the
-corresponding characters in the subject. As a trivial example, the pattern
-</P>
-<P>
-<PRE>
-  The quick brown fox
-</PRE>
-</P>
-<P>
-matches a portion of a subject string that is identical to itself. The power of
-regular expressions comes from the ability to include alternatives and
-repetitions in the pattern. These are encoded in the pattern by the use of
-<I>meta-characters</I>, which do not stand for themselves but instead are
-interpreted in some special way.
-</P>
-<P>
-There are two different sets of meta-characters: those that are recognized
-anywhere in the pattern except within square brackets, and those that are
-recognized in square brackets. Outside square brackets, the meta-characters are
-as follows:
-</P>
-<P>
-<PRE>
-  \      general escape character with several uses
-  ^      assert start of subject (or line, in multiline mode)
-  $      assert end of subject (or line, in multiline mode)
-  .      match any character except newline (by default)
-  [      start character class definition
-  |      start of alternative branch
-  (      start subpattern
-  )      end subpattern
-  ?      extends the meaning of (
-         also 0 or 1 quantifier
-         also quantifier minimizer
-  *      0 or more quantifier
-  +      1 or more quantifier
-  {      start min/max quantifier
-</PRE>
-</P>
-<P>
-Part of a pattern that is in square brackets is called a "character class". In
-a character class the only meta-characters are:
-</P>
-<P>
-<PRE>
-  \      general escape character
-  ^      negate the class, but only if the first character
-  -      indicates character range
-  ]      terminates the character class
-</PRE>
-</P>
-<P>
-The following sections describe the use of each of the meta-characters.
-</P>
-<LI><A NAME="SEC14" HREF="#TOC1">BACKSLASH</A>
-<P>
-The backslash character has several uses. Firstly, if it is followed by a
-non-alphameric character, it takes away any special meaning that character may
-have. This use of backslash as an escape character applies both inside and
-outside character classes.
-</P>
-<P>
-For example, if you want to match a "*" character, you write "\*" in the
-pattern. This applies whether or not the following character would otherwise be
-interpreted as a meta-character, so it is always safe to precede a
-non-alphameric with "\" to specify that it stands for itself. In particular,
-if you want to match a backslash, you write "\\".
-</P>
-<P>
-If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the
-pattern (other than in a character class) and characters between a "#" outside
-a character class and the next newline character are ignored. An escaping
-backslash can be used to include a whitespace or "#" character as part of the
-pattern.
-</P>
-<P>
-A second use of backslash provides a way of encoding non-printing characters
-in patterns in a visible manner. There is no restriction on the appearance of
-non-printing characters, apart from the binary zero that terminates a pattern,
-but when a pattern is being prepared by text editing, it is usually easier to
-use one of the following escape sequences than the binary character it
-represents:
-</P>
-<P>
-<PRE>
-  \a     alarm, that is, the BEL character (hex 07)
-  \cx    "control-x", where x is any character
-  \e     escape (hex 1B)
-  \f     formfeed (hex 0C)
-  \n     newline (hex 0A)
-  \r     carriage return (hex 0D)
-  \t     tab (hex 09)
-  \xhh   character with hex code hh
-  \ddd   character with octal code ddd, or backreference
-</PRE>
-</P>
-<P>
-The precise effect of "\cx" is as follows: if "x" is a lower case letter, it
-is converted to upper case. Then bit 6 of the character (hex 40) is inverted.
-Thus "\cz" becomes hex 1A, but "\c{" becomes hex 3B, while "\c;" becomes hex
-7B.
-</P>
-<P>
-After "\x", up to two hexadecimal digits are read (letters can be in upper or
-lower case).
-</P>
-<P>
-After "\0" up to two further octal digits are read. In both cases, if there
-are fewer than two digits, just those that are present are used. Thus the
-sequence "\0\x\07" specifies two binary zeros followed by a BEL character.
-Make sure you supply two digits after the initial zero if the character that
-follows is itself an octal digit.
-</P>
-<P>
-The handling of a backslash followed by a digit other than 0 is complicated.
-Outside a character class, PCRE reads it and any following digits as a decimal
-number. If the number is less than 10, or if there have been at least that many
-previous capturing left parentheses in the expression, the entire sequence is
-taken as a <I>back reference</I>. A description of how this works is given
-later, following the discussion of parenthesized subpatterns.
-</P>
-<P>
-Inside a character class, or if the decimal number is greater than 9 and there
-have not been that many capturing subpatterns, PCRE re-reads up to three octal
-digits following the backslash, and generates a single byte from the least
-significant 8 bits of the value. Any subsequent digits stand for themselves.
-For example:
-</P>
-<P>
-<PRE>
-  \040   is another way of writing a space
-  \40    is the same, provided there are fewer than 40
-            previous capturing subpatterns
-  \7     is always a back reference
-  \11    might be a back reference, or another way of
-            writing a tab
-  \011   is always a tab
-  \0113  is a tab followed by the character "3"
-  \113   is the character with octal code 113 (since there
-            can be no more than 99 back references)
-  \377   is a byte consisting entirely of 1 bits
-  \81    is either a back reference, or a binary zero
-            followed by the two characters "8" and "1"
-</PRE>
-</P>
-<P>
-Note that octal values of 100 or greater must not be introduced by a leading
-zero, because no more than three octal digits are ever read.
-</P>
-<P>
-All the sequences that define a single byte value can be used both inside and
-outside character classes. In addition, inside a character class, the sequence
-"\b" is interpreted as the backspace character (hex 08). Outside a character
-class it has a different meaning (see below).
-</P>
-<P>
-The third use of backslash is for specifying generic character types:
-</P>
-<P>
-<PRE>
-  \d     any decimal digit
-  \D     any character that is not a decimal digit
-  \s     any whitespace character
-  \S     any character that is not a whitespace character
-  \w     any "word" character
-  \W     any "non-word" character
-</PRE>
-</P>
-<P>
-Each pair of escape sequences partitions the complete set of characters into
-two disjoint sets. Any given character matches one, and only one, of each pair.
-</P>
-<P>
-A "word" character is any letter or digit or the underscore character, that is,
-any character which can be part of a Perl "word". The definition of letters and
-digits is controlled by PCRE's character tables, and may vary if locale-
-specific matching is taking place (see "Locale support" above). For example, in
-the "fr" (French) locale, some character codes greater than 128 are used for
-accented letters, and these are matched by \w.
-</P>
-<P>
-These character type sequences can appear both inside and outside character
-classes. They each match one character of the appropriate type. If the current
-matching point is at the end of the subject string, all of them fail, since
-there is no character to match.
-</P>
-<P>
-The fourth use of backslash is for certain simple assertions. An assertion
-specifies a condition that has to be met at a particular point in a match,
-without consuming any characters from the subject string. The use of
-subpatterns for more complicated assertions is described below. The backslashed
-assertions are
-</P>
-<P>
-<PRE>
-  \b     word boundary
-  \B     not a word boundary
-  \A     start of subject (independent of multiline mode)
-  \Z     end of subject or newline at end (independent of multiline mode)
-  \z     end of subject (independent of multiline mode)
-</PRE>
-</P>
-<P>
-These assertions may not appear in character classes (but note that "\b" has a
-different meaning, namely the backspace character, inside a character class).
-</P>
-<P>
-A word boundary is a position in the subject string where the current character
-and the previous character do not both match \w or \W (i.e. one matches
-\w and the other matches \W), or the start or end of the string if the
-first or last character matches \w, respectively.
-</P>
-<P>
-The \A, \Z, and \z assertions differ from the traditional circumflex and
-dollar (described below) in that they only ever match at the very start and end
-of the subject string, whatever options are set. They are not affected by the
-PCRE_NOTBOL or PCRE_NOTEOL options. If the <I>startoffset</I> argument of
-<B>pcre_exec()</B> is non-zero, \A can never match. The difference between \Z
-and \z is that \Z matches before a newline that is the last character of the
-string as well as at the end of the string, whereas \z matches only at the
-end.
-</P>
-<LI><A NAME="SEC15" HREF="#TOC1">CIRCUMFLEX AND DOLLAR</A>
-<P>
-Outside a character class, in the default matching mode, the circumflex
-character is an assertion which is true only if the current matching point is
-at the start of the subject string. If the <I>startoffset</I> argument of
-<B>pcre_exec()</B> is non-zero, circumflex can never match. Inside a character
-class, circumflex has an entirely different meaning (see below).
-</P>
-<P>
-Circumflex need not be the first character of the pattern if a number of
-alternatives are involved, but it should be the first thing in each alternative
-in which it appears if the pattern is ever to match that branch. If all
-possible alternatives start with a circumflex, that is, if the pattern is
-constrained to match only at the start of the subject, it is said to be an
-"anchored" pattern. (There are also other constructs that can cause a pattern
-to be anchored.)
-</P>
-<P>
-A dollar character is an assertion which is true only if the current matching
-point is at the end of the subject string, or immediately before a newline
-character that is the last character in the string (by default). Dollar need
-not be the last character of the pattern if a number of alternatives are
-involved, but it should be the last item in any branch in which it appears.
-Dollar has no special meaning in a character class.
-</P>
-<P>
-The meaning of dollar can be changed so that it matches only at the very end of
-the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching
-time. This does not affect the \Z assertion.
-</P>
-<P>
-The meanings of the circumflex and dollar characters are changed if the
-PCRE_MULTILINE option is set. When this is the case, they match immediately
-after and immediately before an internal "\n" character, respectively, in
-addition to matching at the start and end of the subject string. For example,
-the pattern /^abc$/ matches the subject string "def\nabc" in multiline mode,
-but not otherwise. Consequently, patterns that are anchored in single line mode
-because all branches start with "^" are not anchored in multiline mode, and a
-match for circumflex is possible when the <I>startoffset</I> argument of
-<B>pcre_exec()</B> is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if
-PCRE_MULTILINE is set.
-</P>
-<P>
-Note that the sequences \A, \Z, and \z can be used to match the start and
-end of the subject in both modes, and if all branches of a pattern start with
-\A is it always anchored, whether PCRE_MULTILINE is set or not.
-</P>
-<LI><A NAME="SEC16" HREF="#TOC1">FULL STOP (PERIOD, DOT)</A>
-<P>
-Outside a character class, a dot in the pattern matches any one character in
-the subject, including a non-printing character, but not (by default) newline.
-If the PCRE_DOTALL option is set, dots match newlines as well. The handling of
-dot is entirely independent of the handling of circumflex and dollar, the only
-relationship being that they both involve newline characters. Dot has no
-special meaning in a character class.
-</P>
-<LI><A NAME="SEC17" HREF="#TOC1">SQUARE BRACKETS</A>
-<P>
-An opening square bracket introduces a character class, terminated by a closing
-square bracket. A closing square bracket on its own is not special. If a
-closing square bracket is required as a member of the class, it should be the
-first data character in the class (after an initial circumflex, if present) or
-escaped with a backslash.
-</P>
-<P>
-A character class matches a single character in the subject; the character must
-be in the set of characters defined by the class, unless the first character in
-the class is a circumflex, in which case the subject character must not be in
-the set defined by the class. If a circumflex is actually required as a member
-of the class, ensure it is not the first character, or escape it with a
-backslash.
-</P>
-<P>
-For example, the character class [aeiou] matches any lower case vowel, while
-[^aeiou] matches any character that is not a lower case vowel. Note that a
-circumflex is just a convenient notation for specifying the characters which
-are in the class by enumerating those that are not. It is not an assertion: it
-still consumes a character from the subject string, and fails if the current
-pointer is at the end of the string.
-</P>
-<P>
-When caseless matching is set, any letters in a class represent both their
-upper case and lower case versions, so for example, a caseless [aeiou] matches
-"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a
-caseful version would.
-</P>
-<P>
-The newline character is never treated in any special way in character classes,
-whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class
-such as [^a] will always match a newline.
-</P>
-<P>
-The minus (hyphen) character can be used to specify a range of characters in a
-character class. For example, [d-m] matches any letter between d and m,
-inclusive. If a minus character is required in a class, it must be escaped with
-a backslash or appear in a position where it cannot be interpreted as
-indicating a range, typically as the first or last character in the class.
-</P>
-<P>
-It is not possible to have the literal character "]" as the end character of a
-range. A pattern such as [W-]46] is interpreted as a class of two characters
-("W" and "-") followed by a literal string "46]", so it would match "W46]" or
-"-46]". However, if the "]" is escaped with a backslash it is interpreted as
-the end of range, so [W-\]46] is interpreted as a single class containing a
-range followed by two separate characters. The octal or hexadecimal
-representation of "]" can also be used to end a range.
-</P>
-<P>
-Ranges operate in ASCII collating sequence. They can also be used for
-characters specified numerically, for example [\000-\037]. If a range that
-includes letters is used when caseless matching is set, it matches the letters
-in either case. For example, [W-c] is equivalent to [][\^_`wxyzabc], matched
-caselessly, and if character tables for the "fr" locale are in use,
-[\xc8-\xcb] matches accented E characters in both cases.
-</P>
-<P>
-The character types \d, \D, \s, \S, \w, and \W may also appear in a
-character class, and add the characters that they match to the class. For
-example, [\dABCDEF] matches any hexadecimal digit. A circumflex can
-conveniently be used with the upper case character types to specify a more
-restricted set of characters than the matching lower case type. For example,
-the class [^\W_] matches any letter or digit, but not underscore.
-</P>
-<P>
-All non-alphameric characters other than \, -, ^ (at the start) and the
-terminating ] are non-special in character classes, but it does no harm if they
-are escaped.
-</P>
-<LI><A NAME="SEC18" HREF="#TOC1">POSIX CHARACTER CLASSES</A>
-<P>
-Perl 5.6 (not yet released at the time of writing) is going to support the
-POSIX notation for character classes, which uses names enclosed by [: and :]
-within the enclosing square brackets. PCRE supports this notation. For example,
-</P>
-<P>
-<PRE>
-  [01[:alpha:]%]
-</PRE>
-</P>
-<P>
-matches "0", "1", any alphabetic character, or "%". The supported class names
-are
-</P>
-<P>
-<PRE>
-  alnum    letters and digits
-  alpha    letters
-  ascii    character codes 0 - 127
-  cntrl    control characters
-  digit    decimal digits (same as \d)
-  graph    printing characters, excluding space
-  lower    lower case letters
-  print    printing characters, including space
-  punct    printing characters, excluding letters and digits
-  space    white space (same as \s)
-  upper    upper case letters
-  word     "word" characters (same as \w)
-  xdigit   hexadecimal digits
-</PRE>
-</P>
-<P>
-The names "ascii" and "word" are Perl extensions. Another Perl extension is
-negation, which is indicated by a ^ character after the colon. For example,
-</P>
-<P>
-<PRE>
-  [12[:^digit:]]
-</PRE>
-</P>
-<P>
-matches "1", "2", or any non-digit. PCRE (and Perl) also recogize the POSIX
-syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not
-supported, and an error is given if they are encountered.
-</P>
-<LI><A NAME="SEC19" HREF="#TOC1">VERTICAL BAR</A>
-<P>
-Vertical bar characters are used to separate alternative patterns. For example,
-the pattern
-</P>
-<P>
-<PRE>
-  gilbert|sullivan
-</PRE>
-</P>
-<P>
-matches either "gilbert" or "sullivan". Any number of alternatives may appear,
-and an empty alternative is permitted (matching the empty string).
-The matching process tries each alternative in turn, from left to right,
-and the first one that succeeds is used. If the alternatives are within a
-subpattern (defined below), "succeeds" means matching the rest of the main
-pattern as well as the alternative in the subpattern.
-</P>
-<LI><A NAME="SEC20" HREF="#TOC1">INTERNAL OPTION SETTING</A>
-<P>
-The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED
-can be changed from within the pattern by a sequence of Perl option letters
-enclosed between "(?" and ")". The option letters are
-</P>
-<P>
-<PRE>
-  i  for PCRE_CASELESS
-  m  for PCRE_MULTILINE
-  s  for PCRE_DOTALL
-  x  for PCRE_EXTENDED
-</PRE>
-</P>
-<P>
-For example, (?im) sets caseless, multiline matching. It is also possible to
-unset these options by preceding the letter with a hyphen, and a combined
-setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and
-PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also
-permitted. If a letter appears both before and after the hyphen, the option is
-unset.
-</P>
-<P>
-The scope of these option changes depends on where in the pattern the setting
-occurs. For settings that are outside any subpattern (defined below), the
-effect is the same as if the options were set or unset at the start of
-matching. The following patterns all behave in exactly the same way:
-</P>
-<P>
-<PRE>
-  (?i)abc
-  a(?i)bc
-  ab(?i)c
-  abc(?i)
-</PRE>
-</P>
-<P>
-which in turn is the same as compiling the pattern abc with PCRE_CASELESS set.
-In other words, such "top level" settings apply to the whole pattern (unless
-there are other changes inside subpatterns). If there is more than one setting
-of the same option at top level, the rightmost setting is used.
-</P>
-<P>
-If an option change occurs inside a subpattern, the effect is different. This
-is a change of behaviour in Perl 5.005. An option change inside a subpattern
-affects only that part of the subpattern that follows it, so
-</P>
-<P>
-<PRE>
-  (a(?i)b)c
-</PRE>
-</P>
-<P>
-matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used).
-By this means, options can be made to have different settings in different
-parts of the pattern. Any changes made in one alternative do carry on
-into subsequent branches within the same subpattern. For example,
-</P>
-<P>
-<PRE>
-  (a(?i)b|c)
-</PRE>
-</P>
-<P>
-matches "ab", "aB", "c", and "C", even though when matching "C" the first
-branch is abandoned before the option setting. This is because the effects of
-option settings happen at compile time. There would be some very weird
-behaviour otherwise.
-</P>
-<P>
-The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the
-same way as the Perl-compatible options by using the characters U and X
-respectively. The (?X) flag setting is special in that it must always occur
-earlier in the pattern than any of the additional features it turns on, even
-when it is at top level. It is best put at the start.
-</P>
-<LI><A NAME="SEC21" HREF="#TOC1">SUBPATTERNS</A>
-<P>
-Subpatterns are delimited by parentheses (round brackets), which can be nested.
-Marking part of a pattern as a subpattern does two things:
-</P>
-<P>
-1. It localizes a set of alternatives. For example, the pattern
-</P>
-<P>
-<PRE>
-  cat(aract|erpillar|)
-</PRE>
-</P>
-<P>
-matches one of the words "cat", "cataract", or "caterpillar". Without the
-parentheses, it would match "cataract", "erpillar" or the empty string.
-</P>
-<P>
-2. It sets up the subpattern as a capturing subpattern (as defined above).
-When the whole pattern matches, that portion of the subject string that matched
-the subpattern is passed back to the caller via the <I>ovector</I> argument of
-<B>pcre_exec()</B>. Opening parentheses are counted from left to right (starting
-from 1) to obtain the numbers of the capturing subpatterns.
-</P>
-<P>
-For example, if the string "the red king" is matched against the pattern
-</P>
-<P>
-<PRE>
-  the ((red|white) (king|queen))
-</PRE>
-</P>
-<P>
-the captured substrings are "red king", "red", and "king", and are numbered 1,
-2, and 3.
-</P>
-<P>
-The fact that plain parentheses fulfil two functions is not always helpful.
-There are often times when a grouping subpattern is required without a
-capturing requirement. If an opening parenthesis is followed by "?:", the
-subpattern does not do any capturing, and is not counted when computing the
-number of any subsequent capturing subpatterns. For example, if the string "the
-white queen" is matched against the pattern
-</P>
-<P>
-<PRE>
-  the ((?:red|white) (king|queen))
-</PRE>
-</P>
-<P>
-the captured substrings are "white queen" and "queen", and are numbered 1 and
-2. The maximum number of captured substrings is 99, and the maximum number of
-all subpatterns, both capturing and non-capturing, is 200.
-</P>
-<P>
-As a convenient shorthand, if any option settings are required at the start of
-a non-capturing subpattern, the option letters may appear between the "?" and
-the ":". Thus the two patterns
-</P>
-<P>
-<PRE>
-  (?i:saturday|sunday)
-  (?:(?i)saturday|sunday)
-</PRE>
-</P>
-<P>
-match exactly the same set of strings. Because alternative branches are tried
-from left to right, and options are not reset until the end of the subpattern
-is reached, an option setting in one branch does affect subsequent branches, so
-the above patterns match "SUNDAY" as well as "Saturday".
-</P>
-<LI><A NAME="SEC22" HREF="#TOC1">REPETITION</A>
-<P>
-Repetition is specified by quantifiers, which can follow any of the following
-items:
-</P>
-<P>
-<PRE>
-  a single character, possibly escaped
-  the . metacharacter
-  a character class
-  a back reference (see next section)
-  a parenthesized subpattern (unless it is an assertion - see below)
-</PRE>
-</P>
-<P>
-The general repetition quantifier specifies a minimum and maximum number of
-permitted matches, by giving the two numbers in curly brackets (braces),
-separated by a comma. The numbers must be less than 65536, and the first must
-be less than or equal to the second. For example:
-</P>
-<P>
-<PRE>
-  z{2,4}
-</PRE>
-</P>
-<P>
-matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special
-character. If the second number is omitted, but the comma is present, there is
-no upper limit; if the second number and the comma are both omitted, the
-quantifier specifies an exact number of required matches. Thus
-</P>
-<P>
-<PRE>
-  [aeiou]{3,}
-</PRE>
-</P>
-<P>
-matches at least 3 successive vowels, but may match many more, while
-</P>
-<P>
-<PRE>
-  \d{8}
-</PRE>
-</P>
-<P>
-matches exactly 8 digits. An opening curly bracket that appears in a position
-where a quantifier is not allowed, or one that does not match the syntax of a
-quantifier, is taken as a literal character. For example, {,6} is not a
-quantifier, but a literal string of four characters.
-</P>
-<P>
-The quantifier {0} is permitted, causing the expression to behave as if the
-previous item and the quantifier were not present.
-</P>
-<P>
-For convenience (and historical compatibility) the three most common
-quantifiers have single-character abbreviations:
-</P>
-<P>
-<PRE>
-  *    is equivalent to {0,}
-  +    is equivalent to {1,}
-  ?    is equivalent to {0,1}
-</PRE>
-</P>
-<P>
-It is possible to construct infinite loops by following a subpattern that can
-match no characters with a quantifier that has no upper limit, for example:
-</P>
-<P>
-<PRE>
-  (a?)*
-</PRE>
-</P>
-<P>
-Earlier versions of Perl and PCRE used to give an error at compile time for
-such patterns. However, because there are cases where this can be useful, such
-patterns are now accepted, but if any repetition of the subpattern does in fact
-match no characters, the loop is forcibly broken.
-</P>
-<P>
-By default, the quantifiers are "greedy", that is, they match as much as
-possible (up to the maximum number of permitted times), without causing the
-rest of the pattern to fail. The classic example of where this gives problems
-is in trying to match comments in C programs. These appear between the
-sequences /* and */ and within the sequence, individual * and / characters may
-appear. An attempt to match C comments by applying the pattern
-</P>
-<P>
-<PRE>
-  /\*.*\*/
-</PRE>
-</P>
-<P>
-to the string
-</P>
-<P>
-<PRE>
-  /* first command */  not comment  /* second comment */
-</PRE>
-</P>
-<P>
-fails, because it matches the entire string owing to the greediness of the .*
-item.
-</P>
-<P>
-However, if a quantifier is followed by a question mark, it ceases to be
-greedy, and instead matches the minimum number of times possible, so the
-pattern
-</P>
-<P>
-<PRE>
-  /\*.*?\*/
-</PRE>
-</P>
-<P>
-does the right thing with the C comments. The meaning of the various
-quantifiers is not otherwise changed, just the preferred number of matches.
-Do not confuse this use of question mark with its use as a quantifier in its
-own right. Because it has two uses, it can sometimes appear doubled, as in
-</P>
-<P>
-<PRE>
-  \d??\d
-</PRE>
-</P>
-<P>
-which matches one digit by preference, but can match two if that is the only
-way the rest of the pattern matches.
-</P>
-<P>
-If the PCRE_UNGREEDY option is set (an option which is not available in Perl),
-the quantifiers are not greedy by default, but individual ones can be made
-greedy by following them with a question mark. In other words, it inverts the
-default behaviour.
-</P>
-<P>
-When a parenthesized subpattern is quantified with a minimum repeat count that
-is greater than 1 or with a limited maximum, more store is required for the
-compiled pattern, in proportion to the size of the minimum or maximum.
-</P>
-<P>
-If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent
-to Perl's /s) is set, thus allowing the . to match newlines, the pattern is
-implicitly anchored, because whatever follows will be tried against every
-character position in the subject string, so there is no point in retrying the
-overall match at any position after the first. PCRE treats such a pattern as
-though it were preceded by \A. In cases where it is known that the subject
-string contains no newlines, it is worth setting PCRE_DOTALL when the pattern
-begins with .* in order to obtain this optimization, or alternatively using ^
-to indicate anchoring explicitly.
-</P>
-<P>
-When a capturing subpattern is repeated, the value captured is the substring
-that matched the final iteration. For example, after
-</P>
-<P>
-<PRE>
-  (tweedle[dume]{3}\s*)+
-</PRE>
-</P>
-<P>
-has matched "tweedledum tweedledee" the value of the captured substring is
-"tweedledee". However, if there are nested capturing subpatterns, the
-corresponding captured values may have been set in previous iterations. For
-example, after
-</P>
-<P>
-<PRE>
-  /(a|(b))+/
-</PRE>
-</P>
-<P>
-matches "aba" the value of the second captured substring is "b".
-</P>
-<LI><A NAME="SEC23" HREF="#TOC1">BACK REFERENCES</A>
-<P>
-Outside a character class, a backslash followed by a digit greater than 0 (and
-possibly further digits) is a back reference to a capturing subpattern earlier
-(i.e. to its left) in the pattern, provided there have been that many previous
-capturing left parentheses.
-</P>
-<P>
-However, if the decimal number following the backslash is less than 10, it is
-always taken as a back reference, and causes an error only if there are not
-that many capturing left parentheses in the entire pattern. In other words, the
-parentheses that are referenced need not be to the left of the reference for
-numbers less than 10. See the section entitled "Backslash" above for further
-details of the handling of digits following a backslash.
-</P>
-<P>
-A back reference matches whatever actually matched the capturing subpattern in
-the current subject string, rather than anything matching the subpattern
-itself. So the pattern
-</P>
-<P>
-<PRE>
-  (sens|respons)e and \1ibility
-</PRE>
-</P>
-<P>
-matches "sense and sensibility" and "response and responsibility", but not
-"sense and responsibility". If caseful matching is in force at the time of the
-back reference, the case of letters is relevant. For example,
-</P>
-<P>
-<PRE>
-  ((?i)rah)\s+\1
-</PRE>
-</P>
-<P>
-matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original
-capturing subpattern is matched caselessly.
-</P>
-<P>
-There may be more than one back reference to the same subpattern. If a
-subpattern has not actually been used in a particular match, any back
-references to it always fail. For example, the pattern
-</P>
-<P>
-<PRE>
-  (a|(bc))\2
-</PRE>
-</P>
-<P>
-always fails if it starts to match "a" rather than "bc". Because there may be
-up to 99 back references, all digits following the backslash are taken
-as part of a potential back reference number. If the pattern continues with a
-digit character, some delimiter must be used to terminate the back reference.
-If the PCRE_EXTENDED option is set, this can be whitespace. Otherwise an empty
-comment can be used.
-</P>
-<P>
-A back reference that occurs inside the parentheses to which it refers fails
-when the subpattern is first used, so, for example, (a\1) never matches.
-However, such references can be useful inside repeated subpatterns. For
-example, the pattern
-</P>
-<P>
-<PRE>
-  (a|b\1)+
-</PRE>
-</P>
-<P>
-matches any number of "a"s and also "aba", "ababbaa" etc. At each iteration of
-the subpattern, the back reference matches the character string corresponding
-to the previous iteration. In order for this to work, the pattern must be such
-that the first iteration does not need to match the back reference. This can be
-done using alternation, as in the example above, or by a quantifier with a
-minimum of zero.
-</P>
-<LI><A NAME="SEC24" HREF="#TOC1">ASSERTIONS</A>
-<P>
-An assertion is a test on the characters following or preceding the current
-matching point that does not actually consume any characters. The simple
-assertions coded as \b, \B, \A, \Z, \z, ^ and $ are described above. More
-complicated assertions are coded as subpatterns. There are two kinds: those
-that look ahead of the current position in the subject string, and those that
-look behind it.
-</P>
-<P>
-An assertion subpattern is matched in the normal way, except that it does not
-cause the current matching position to be changed. Lookahead assertions start
-with (?= for positive assertions and (?! for negative assertions. For example,
-</P>
-<P>
-<PRE>
-  \w+(?=;)
-</PRE>
-</P>
-<P>
-matches a word followed by a semicolon, but does not include the semicolon in
-the match, and
-</P>
-<P>
-<PRE>
-  foo(?!bar)
-</PRE>
-</P>
-<P>
-matches any occurrence of "foo" that is not followed by "bar". Note that the
-apparently similar pattern
-</P>
-<P>
-<PRE>
-  (?!foo)bar
-</PRE>
-</P>
-<P>
-does not find an occurrence of "bar" that is preceded by something other than
-"foo"; it finds any occurrence of "bar" whatsoever, because the assertion
-(?!foo) is always true when the next three characters are "bar". A
-lookbehind assertion is needed to achieve this effect.
-</P>
-<P>
-Lookbehind assertions start with (?&#60;= for positive assertions and (?&#60;! for
-negative assertions. For example,
-</P>
-<P>
-<PRE>
-  (?&#60;!foo)bar
-</PRE>
-</P>
-<P>
-does find an occurrence of "bar" that is not preceded by "foo". The contents of
-a lookbehind assertion are restricted such that all the strings it matches must
-have a fixed length. However, if there are several alternatives, they do not
-all have to have the same fixed length. Thus
-</P>
-<P>
-<PRE>
-  (?&#60;=bullock|donkey)
-</PRE>
-</P>
-<P>
-is permitted, but
-</P>
-<P>
-<PRE>
-  (?&#60;!dogs?|cats?)
-</PRE>
-</P>
-<P>
-causes an error at compile time. Branches that match different length strings
-are permitted only at the top level of a lookbehind assertion. This is an
-extension compared with Perl 5.005, which requires all branches to match the
-same length of string. An assertion such as
-</P>
-<P>
-<PRE>
-  (?&#60;=ab(c|de))
-</PRE>
-</P>
-<P>
-is not permitted, because its single top-level branch can match two different
-lengths, but it is acceptable if rewritten to use two top-level branches:
-</P>
-<P>
-<PRE>
-  (?&#60;=abc|abde)
-</PRE>
-</P>
-<P>
-The implementation of lookbehind assertions is, for each alternative, to
-temporarily move the current position back by the fixed width and then try to
-match. If there are insufficient characters before the current position, the
-match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns
-can be particularly useful for matching at the ends of strings; an example is
-given at the end of the section on once-only subpatterns.
-</P>
-<P>
-Several assertions (of any sort) may occur in succession. For example,
-</P>
-<P>
-<PRE>
-  (?&#60;=\d{3})(?&#60;!999)foo
-</PRE>
-</P>
-<P>
-matches "foo" preceded by three digits that are not "999". Notice that each of
-the assertions is applied independently at the same point in the subject
-string. First there is a check that the previous three characters are all
-digits, and then there is a check that the same three characters are not "999".
-This pattern does <I>not</I> match "foo" preceded by six characters, the first
-of which are digits and the last three of which are not "999". For example, it
-doesn't match "123abcfoo". A pattern to do that is
-</P>
-<P>
-<PRE>
-  (?&#60;=\d{3}...)(?&#60;!999)foo
-</PRE>
-</P>
-<P>
-This time the first assertion looks at the preceding six characters, checking
-that the first three are digits, and then the second assertion checks that the
-preceding three characters are not "999".
-</P>
-<P>
-Assertions can be nested in any combination. For example,
-</P>
-<P>
-<PRE>
-  (?&#60;=(?&#60;!foo)bar)baz
-</PRE>
-</P>
-<P>
-matches an occurrence of "baz" that is preceded by "bar" which in turn is not
-preceded by "foo", while
-</P>
-<P>
-<PRE>
-  (?&#60;=\d{3}(?!999)...)foo
-</PRE>
-</P>
-<P>
-is another pattern which matches "foo" preceded by three digits and any three
-characters that are not "999".
-</P>
-<P>
-Assertion subpatterns are not capturing subpatterns, and may not be repeated,
-because it makes no sense to assert the same thing several times. If any kind
-of assertion contains capturing subpatterns within it, these are counted for
-the purposes of numbering the capturing subpatterns in the whole pattern.
-However, substring capturing is carried out only for positive assertions,
-because it does not make sense for negative assertions.
-</P>
-<P>
-Assertions count towards the maximum of 200 parenthesized subpatterns.
-</P>
-<LI><A NAME="SEC25" HREF="#TOC1">ONCE-ONLY SUBPATTERNS</A>
-<P>
-With both maximizing and minimizing repetition, failure of what follows
-normally causes the repeated item to be re-evaluated to see if a different
-number of repeats allows the rest of the pattern to match. Sometimes it is
-useful to prevent this, either to change the nature of the match, or to cause
-it fail earlier than it otherwise might, when the author of the pattern knows
-there is no point in carrying on.
-</P>
-<P>
-Consider, for example, the pattern \d+foo when applied to the subject line
-</P>
-<P>
-<PRE>
-  123456bar
-</PRE>
-</P>
-<P>
-After matching all 6 digits and then failing to match "foo", the normal
-action of the matcher is to try again with only 5 digits matching the \d+
-item, and then with 4, and so on, before ultimately failing. Once-only
-subpatterns provide the means for specifying that once a portion of the pattern
-has matched, it is not to be re-evaluated in this way, so the matcher would
-give up immediately on failing to match "foo" the first time. The notation is
-another kind of special parenthesis, starting with (?&#62; as in this example:
-</P>
-<P>
-<PRE>
-  (?&#62;\d+)bar
-</PRE>
-</P>
-<P>
-This kind of parenthesis "locks up" the  part of the pattern it contains once
-it has matched, and a failure further into the pattern is prevented from
-backtracking into it. Backtracking past it to previous items, however, works as
-normal.
-</P>
-<P>
-An alternative description is that a subpattern of this type matches the string
-of characters that an identical standalone pattern would match, if anchored at
-the current point in the subject string.
-</P>
-<P>
-Once-only subpatterns are not capturing subpatterns. Simple cases such as the
-above example can be thought of as a maximizing repeat that must swallow
-everything it can. So, while both \d+ and \d+? are prepared to adjust the
-number of digits they match in order to make the rest of the pattern match,
-(?&#62;\d+) can only match an entire sequence of digits.
-</P>
-<P>
-This construction can of course contain arbitrarily complicated subpatterns,
-and it can be nested.
-</P>
-<P>
-Once-only subpatterns can be used in conjunction with lookbehind assertions to
-specify efficient matching at the end of the subject string. Consider a simple
-pattern such as
-</P>
-<P>
-<PRE>
-  abcd$
-</PRE>
-</P>
-<P>
-when applied to a long string which does not match. Because matching proceeds
-from left to right, PCRE will look for each "a" in the subject and then see if
-what follows matches the rest of the pattern. If the pattern is specified as
-</P>
-<P>
-<PRE>
-  ^.*abcd$
-</PRE>
-</P>
-<P>
-the initial .* matches the entire string at first, but when this fails (because
-there is no following "a"), it backtracks to match all but the last character,
-then all but the last two characters, and so on. Once again the search for "a"
-covers the entire string, from right to left, so we are no better off. However,
-if the pattern is written as
-</P>
-<P>
-<PRE>
-  ^(?&#62;.*)(?&#60;=abcd)
-</PRE>
-</P>
-<P>
-there can be no backtracking for the .* item; it can match only the entire
-string. The subsequent lookbehind assertion does a single test on the last four
-characters. If it fails, the match fails immediately. For long strings, this
-approach makes a significant difference to the processing time.
-</P>
-<P>
-When a pattern contains an unlimited repeat inside a subpattern that can itself
-be repeated an unlimited number of times, the use of a once-only subpattern is
-the only way to avoid some failing matches taking a very long time indeed.
-The pattern
-</P>
-<P>
-<PRE>
-  (\D+|&#60;\d+&#62;)*[!?]
-</PRE>
-</P>
-<P>
-matches an unlimited number of substrings that either consist of non-digits, or
-digits enclosed in &#60;&#62;, followed by either ! or ?. When it matches, it runs
-quickly. However, if it is applied to
-</P>
-<P>
-<PRE>
-  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
-</PRE>
-</P>
-<P>
-it takes a long time before reporting failure. This is because the string can
-be divided between the two repeats in a large number of ways, and all have to
-be tried. (The example used [!?] rather than a single character at the end,
-because both PCRE and Perl have an optimization that allows for fast failure
-when a single character is used. They remember the last single character that
-is required for a match, and fail early if it is not present in the string.)
-If the pattern is changed to
-</P>
-<P>
-<PRE>
-  ((?&#62;\D+)|&#60;\d+&#62;)*[!?]
-</PRE>
-</P>
-<P>
-sequences of non-digits cannot be broken, and failure happens quickly.
-</P>
-<LI><A NAME="SEC26" HREF="#TOC1">CONDITIONAL SUBPATTERNS</A>
-<P>
-It is possible to cause the matching process to obey a subpattern
-conditionally or to choose between two alternative subpatterns, depending on
-the result of an assertion, or whether a previous capturing subpattern matched
-or not. The two possible forms of conditional subpattern are
-</P>
-<P>
-<PRE>
-  (?(condition)yes-pattern)
-  (?(condition)yes-pattern|no-pattern)
-</PRE>
-</P>
-<P>
-If the condition is satisfied, the yes-pattern is used; otherwise the
-no-pattern (if present) is used. If there are more than two alternatives in the
-subpattern, a compile-time error occurs.
-</P>
-<P>
-There are two kinds of condition. If the text between the parentheses consists
-of a sequence of digits, the condition is satisfied if the capturing subpattern
-of that number has previously matched. The number must be greater than zero.
-Consider the following pattern, which contains non-significant white space to
-make it more readable (assume the PCRE_EXTENDED option) and to divide it into
-three parts for ease of discussion:
-</P>
-<P>
-<PRE>
-  ( \( )?    [^()]+    (?(1) \) )
-</PRE>
-</P>
-<P>
-The first part matches an optional opening parenthesis, and if that
-character is present, sets it as the first captured substring. The second part
-matches one or more characters that are not parentheses. The third part is a
-conditional subpattern that tests whether the first set of parentheses matched
-or not. If they did, that is, if subject started with an opening parenthesis,
-the condition is true, and so the yes-pattern is executed and a closing
-parenthesis is required. Otherwise, since no-pattern is not present, the
-subpattern matches nothing. In other words, this pattern matches a sequence of
-non-parentheses, optionally enclosed in parentheses.
-</P>
-<P>
-If the condition is not a sequence of digits, it must be an assertion. This may
-be a positive or negative lookahead or lookbehind assertion. Consider this
-pattern, again containing non-significant white space, and with the two
-alternatives on the second line:
-</P>
-<P>
-<PRE>
-  (?(?=[^a-z]*[a-z])
-  \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )
-</PRE>
-</P>
-<P>
-The condition is a positive lookahead assertion that matches an optional
-sequence of non-letters followed by a letter. In other words, it tests for the
-presence of at least one letter in the subject. If a letter is found, the
-subject is matched against the first alternative; otherwise it is matched
-against the second. This pattern matches strings in one of the two forms
-dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.
-</P>
-<LI><A NAME="SEC27" HREF="#TOC1">COMMENTS</A>
-<P>
-The sequence (?# marks the start of a comment which continues up to the next
-closing parenthesis. Nested parentheses are not permitted. The characters
-that make up a comment play no part in the pattern matching at all.
-</P>
-<P>
-If the PCRE_EXTENDED option is set, an unescaped # character outside a
-character class introduces a comment that continues up to the next newline
-character in the pattern.
-</P>
-<LI><A NAME="SEC28" HREF="#TOC1">RECURSIVE PATTERNS</A>
-<P>
-Consider the problem of matching a string in parentheses, allowing for
-unlimited nested parentheses. Without the use of recursion, the best that can
-be done is to use a pattern that matches up to some fixed depth of nesting. It
-is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an
-experimental facility that allows regular expressions to recurse (amongst other
-things). It does this by interpolating Perl code in the expression at run time,
-and the code can refer to the expression itself. A Perl pattern to solve the
-parentheses problem can be created like this:
-</P>
-<P>
-<PRE>
-  $re = qr{\( (?: (?&#62;[^()]+) | (?p{$re}) )* \)}x;
-</PRE>
-</P>
-<P>
-The (?p{...}) item interpolates Perl code at run time, and in this case refers
-recursively to the pattern in which it appears. Obviously, PCRE cannot support
-the interpolation of Perl code. Instead, the special item (?R) is provided for
-the specific case of recursion. This PCRE pattern solves the parentheses
-problem (assume the PCRE_EXTENDED option is set so that white space is
-ignored):
-</P>
-<P>
-<PRE>
-  \( ( (?&#62;[^()]+) | (?R) )* \)
-</PRE>
-</P>
-<P>
-First it matches an opening parenthesis. Then it matches any number of
-substrings which can either be a sequence of non-parentheses, or a recursive
-match of the pattern itself (i.e. a correctly parenthesized substring). Finally
-there is a closing parenthesis.
-</P>
-<P>
-This particular example pattern contains nested unlimited repeats, and so the
-use of a once-only subpattern for matching strings of non-parentheses is
-important when applying the pattern to strings that do not match. For example,
-when it is applied to
-</P>
-<P>
-<PRE>
-  (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
-</PRE>
-</P>
-<P>
-it yields "no match" quickly. However, if a once-only subpattern is not used,
-the match runs for a very long time indeed because there are so many different
-ways the + and * repeats can carve up the subject, and all have to be tested
-before failure can be reported.
-</P>
-<P>
-The values set for any capturing subpatterns are those from the outermost level
-of the recursion at which the subpattern value is set. If the pattern above is
-matched against
-</P>
-<P>
-<PRE>
-  (ab(cd)ef)
-</PRE>
-</P>
-<P>
-the value for the capturing parentheses is "ef", which is the last value taken
-on at the top level. If additional parentheses are added, giving
-</P>
-<P>
-<PRE>
-  \( ( ( (?&#62;[^()]+) | (?R) )* ) \)
-     ^                        ^
-     ^                        ^
-</PRE>
-the string they capture is "ab(cd)ef", the contents of the top level
-parentheses. If there are more than 15 capturing parentheses in a pattern, PCRE
-has to obtain extra memory to store data during a recursion, which it does by
-using <B>pcre_malloc</B>, freeing it via <B>pcre_free</B> afterwards. If no
-memory can be obtained, it saves data for the first 15 capturing parentheses
-only, as there is no way to give an out-of-memory error from within a
-recursion.
-</P>
-<LI><A NAME="SEC29" HREF="#TOC1">PERFORMANCE</A>
-<P>
-Certain items that may appear in patterns are more efficient than others. It is
-more efficient to use a character class like [aeiou] than a set of alternatives
-such as (a|e|i|o|u). In general, the simplest construction that provides the
-required behaviour is usually the most efficient. Jeffrey Friedl's book
-contains a lot of discussion about optimizing regular expressions for efficient
-performance.
-</P>
-<P>
-When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is
-implicitly anchored by PCRE, since it can match only at the start of a subject
-string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization,
-because the . metacharacter does not then match a newline, and if the subject
-string contains newlines, the pattern may match from the character immediately
-following one of them instead of from the very start. For example, the pattern
-</P>
-<P>
-<PRE>
-  (.*) second
-</PRE>
-</P>
-<P>
-matches the subject "first\nand second" (where \n stands for a newline
-character) with the first captured substring being "and". In order to do this,
-PCRE has to retry the match starting after every newline in the subject.
-</P>
-<P>
-If you are using such a pattern with subject strings that do not contain
-newlines, the best performance is obtained by setting PCRE_DOTALL, or starting
-the pattern with ^.* to indicate explicit anchoring. That saves PCRE from
-having to scan along the subject looking for a newline to restart at.
-</P>
-<P>
-Beware of patterns that contain nested indefinite repeats. These can take a
-long time to run when applied to a string that does not match. Consider the
-pattern fragment
-</P>
-<P>
-<PRE>
-  (a+)*
-</PRE>
-</P>
-<P>
-This can match "aaaa" in 33 different ways, and this number increases very
-rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4
-times, and for each of those cases other than 0, the + repeats can match
-different numbers of times.) When the remainder of the pattern is such that the
-entire match is going to fail, PCRE has in principle to try every possible
-variation, and this can take an extremely long time.
-</P>
-<P>
-An optimization catches some of the more simple cases such as
-</P>
-<P>
-<PRE>
-  (a+)*b
-</PRE>
-</P>
-<P>
-where a literal character follows. Before embarking on the standard matching
-procedure, PCRE checks that there is a "b" later in the subject string, and if
-there is not, it fails the match immediately. However, when there is no
-following literal this optimization cannot be used. You can see the difference
-by comparing the behaviour of
-</P>
-<P>
-<PRE>
-  (a+)*\d
-</PRE>
-</P>
-<P>
-with the pattern above. The former gives a failure almost instantly when
-applied to a whole line of "a" characters, whereas the latter takes an
-appreciable time with strings longer than about 20 characters.
-</P>
-<LI><A NAME="SEC30" HREF="#TOC1">UTF-8 SUPPORT</A>
-<P>
-Starting at release 3.3, PCRE has some support for character strings encoded
-in the UTF-8 format. This is incomplete, and is regarded as experimental. In
-order to use it, you must configure PCRE to include UTF-8 support in the code,
-and, in addition, you must call <B>pcre_compile()</B> with the PCRE_UTF8 option
-flag. When you do this, both the pattern and any subject strings that are
-matched against it are treated as UTF-8 strings instead of just strings of
-bytes, but only in the cases that are mentioned below.
-</P>
-<P>
-If you compile PCRE with UTF-8 support, but do not use it at run time, the
-library will be a bit bigger, but the additional run time overhead is limited
-to testing the PCRE_UTF8 flag in several places, so should not be very large.
-</P>
-<P>
-PCRE assumes that the strings it is given contain valid UTF-8 codes. It does
-not diagnose invalid UTF-8 strings. If you pass invalid UTF-8 strings to PCRE,
-the results are undefined.
-</P>
-<P>
-Running with PCRE_UTF8 set causes these changes in the way PCRE works:
-</P>
-<P>
-1. In a pattern, the escape sequence \x{...}, where the contents of the braces
-is a string of hexadecimal digits, is interpreted as a UTF-8 character whose
-code number is the given hexadecimal number, for example: \x{1234}. This
-inserts from one to six literal bytes into the pattern, using the UTF-8
-encoding. If a non-hexadecimal digit appears between the braces, the item is
-not recognized.
-</P>
-<P>
-2. The original hexadecimal escape sequence, \xhh, generates a two-byte UTF-8
-character if its value is greater than 127.
-</P>
-<P>
-3. Repeat quantifiers are NOT correctly handled if they follow a multibyte
-character. For example, \x{100}* and \xc3+ do not work. If you want to
-repeat such characters, you must enclose them in non-capturing parentheses,
-for example (?:\x{100}), at present.
-</P>
-<P>
-4. The dot metacharacter matches one UTF-8 character instead of a single byte.
-</P>
-<P>
-5. Unlike literal UTF-8 characters, the dot metacharacter followed by a
-repeat quantifier does operate correctly on UTF-8 characters instead of
-single bytes.
-</P>
-<P>
-4. Although the \x{...} escape is permitted in a character class, characters
-whose values are greater than 255 cannot be included in a class.
-</P>
-<P>
-5. A class is matched against a UTF-8 character instead of just a single byte,
-but it can match only characters whose values are less than 256. Characters
-with greater values always fail to match a class.
-</P>
-<P>
-6. Repeated classes work correctly on multiple characters.
-</P>
-<P>
-7. Classes containing just a single character whose value is greater than 127
-(but less than 256), for example, [\x80] or [^\x{93}], do not work because
-these are optimized into single byte matches. In the first case, of course,
-the class brackets are just redundant.
-</P>
-<P>
-8. Lookbehind assertions move backwards in the subject by a fixed number of
-characters instead of a fixed number of bytes. Simple cases have been tested
-to work correctly, but there may be hidden gotchas herein.
-</P>
-<P>
-9. The character types such as \d and \w do not work correctly with UTF-8
-characters. They continue to test a single byte.
-</P>
-<P>
-10. Anything not explicitly mentioned here continues to work in bytes rather
-than in characters.
-</P>
-<P>
-The following UTF-8 features of Perl 5.6 are not implemented:
-</P>
-<P>
-1. The escape sequence \C to match a single byte.
-</P>
-<P>
-2. The use of Unicode tables and properties and escapes \p, \P, and \X.
-</P>
-<LI><A NAME="SEC31" HREF="#TOC1">AUTHOR</A>
-<P>
-Philip Hazel &#60;ph10@xxxxxxxxx&#62;
-<BR>
-University Computing Service,
-<BR>
-New Museums Site,
-<BR>
-Cambridge CB2 3QG, England.
-<BR>
-Phone: +44 1223 334714
-</P>
-<P>
-Last updated: 28 August 2000,
-<BR>
-<PRE>
-  the 250th anniversary of the death of J.S. Bach.
-<BR>
-</PRE>
-Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcre.txt b/external/privoxy/pcre/doc/pcre.txt
deleted file mode 100644
index 1db4b53..0000000
--- a/external/privoxy/pcre/doc/pcre.txt
+++ /dev/null
@@ -1,2125 +0,0 @@
-NAME
-     pcre - Perl-compatible regular expressions.
-
-
-
-SYNOPSIS
-     #include <pcre.h>
-
-     pcre *pcre_compile(const char *pattern, int options,
-          const char **errptr, int *erroffset,
-          const unsigned char *tableptr);
-
-     pcre_extra *pcre_study(const pcre *code, int options,
-          const char **errptr);
-
-     int pcre_exec(const pcre *code, const pcre_extra *extra,
-          const char *subject, int length, int startoffset,
-          int options, int *ovector, int ovecsize);
-
-     int pcre_copy_substring(const char *subject, int *ovector,
-          int stringcount, int stringnumber, char *buffer,
-          int buffersize);
-
-     int pcre_get_substring(const char *subject, int *ovector,
-          int stringcount, int stringnumber,
-          const char **stringptr);
-
-     int pcre_get_substring_list(const char *subject,
-          int *ovector, int stringcount, const char ***listptr);
-
-     void pcre_free_substring(const char *stringptr);
-
-     void pcre_free_substring_list(const char **stringptr);
-
-     const unsigned char *pcre_maketables(void);
-
-     int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
-          int what, void *where);
-
-     int pcre_info(const pcre *code, int *optptr, *firstcharptr);
-
-     char *pcre_version(void);
-
-     void *(*pcre_malloc)(size_t);
-
-     void (*pcre_free)(void *);
-
-
-
-
-DESCRIPTION
-     The PCRE library is a set of functions that implement  regu-
-     lar  expression  pattern  matching using the same syntax and
-     semantics as Perl  5,  with  just  a  few  differences  (see
-
-     below).  The  current  implementation  corresponds  to  Perl
-     5.005, with some additional features  from  later  versions.
-     This  includes  some  experimental,  incomplete  support for
-     UTF-8 encoded strings. Details of exactly what is  and  what
-     is not supported are given below.
-
-     PCRE has its own native API,  which  is  described  in  this
-     document.  There  is  also  a  set of wrapper functions that
-     correspond to the POSIX regular expression API.   These  are
-     described in the pcreposix documentation.
-
-     The native API function prototypes are defined in the header
-     file  pcre.h,  and  on  Unix  systems  the library itself is
-     called libpcre.a, so can be accessed by adding -lpcre to the
-     command  for  linking  an  application  which  calls it. The
-     header file defines the macros PCRE_MAJOR and PCRE_MINOR  to
-     contain the major and minor release numbers for the library.
-     Applications can use these to include support for  different
-     releases.
-
-     The functions pcre_compile(), pcre_study(), and  pcre_exec()
-     are used for compiling and matching regular expressions.
-
-     The functions  pcre_copy_substring(),  pcre_get_substring(),
-     and  pcre_get_substring_list() are convenience functions for
-     extracting  captured  substrings  from  a  matched   subject
-     string; pcre_free_substring() and pcre_free_substring_list()
-     are also provided, to free the  memory  used  for  extracted
-     strings.
-
-     The function pcre_maketables() is used (optionally) to build
-     a  set of character tables in the current locale for passing
-     to pcre_compile().
-
-     The function pcre_fullinfo() is used to find out information
-     about a compiled pattern; pcre_info() is an obsolete version
-     which returns only some of the available information, but is
-     retained   for   backwards   compatibility.    The  function
-     pcre_version() returns a pointer to a string containing  the
-     version of PCRE and its date of release.
-
-     The global variables  pcre_malloc  and  pcre_free  initially
-     contain the entry points of the standard malloc() and free()
-     functions respectively. PCRE  calls  the  memory  management
-     functions  via  these  variables,  so  a calling program can
-     replace them if it  wishes  to  intercept  the  calls.  This
-     should be done before calling any PCRE functions.
-
-
-
-MULTI-THREADING
-     The  PCRE  functions  can   be   used   in   multi-threading
-
-
-
-
-
-SunOS 5.8                 Last change:                          2
-
-
-
-     applications,  with  the  proviso that the memory management
-     functions pointed to by pcre_malloc and pcre_free are shared
-     by all threads.
-
-     The compiled form of a regular  expression  is  not  altered
-     during  matching, so the same compiled pattern can safely be
-     used by several threads at once.
-
-
-
-COMPILING A PATTERN
-     The function pcre_compile() is called to compile  a  pattern
-     into  an internal form. The pattern is a C string terminated
-     by a binary zero, and is passed in the argument  pattern.  A
-     pointer  to  a  single  block of memory that is obtained via
-     pcre_malloc is returned. This contains the compiled code and
-     related data. The pcre type is defined for this for conveni-
-     ence, but in fact pcre is just a typedef for void, since the
-     contents  of  the block are not externally defined. It is up
-     to the caller to free  the  memory  when  it  is  no  longer
-     required.
-
-     The size of a compiled pattern is  roughly  proportional  to
-     the length of the pattern string, except that each character
-     class (other than those containing just a single  character,
-     negated  or  not)  requires 33 bytes, and repeat quantifiers
-     with a minimum greater than one or a bounded  maximum  cause
-     the  relevant  portions of the compiled pattern to be repli-
-     cated.
-
-     The options argument contains independent bits  that  affect
-     the  compilation.  It  should  be  zero  if  no  options are
-     required. Some of the options, in particular, those that are
-     compatible  with Perl, can also be set and unset from within
-     the pattern (see the detailed description of regular expres-
-     sions below). For these options, the contents of the options
-     argument specifies their initial settings at  the  start  of
-     compilation  and  execution. The PCRE_ANCHORED option can be
-     set at the time of matching as well as at compile time.
-
-     If errptr is NULL, pcre_compile() returns NULL  immediately.
-     Otherwise, if compilation of a pattern fails, pcre_compile()
-     returns NULL, and sets the variable pointed to by errptr  to
-     point  to a textual error message. The offset from the start
-     of  the  pattern  to  the  character  where  the  error  was
-     discovered   is   placed  in  the  variable  pointed  to  by
-     erroffset, which must not be NULL. If it  is,  an  immediate
-     error is given.
-
-     If the final  argument,  tableptr,  is  NULL,  PCRE  uses  a
-     default  set  of character tables which are built when it is
-     compiled, using the default C  locale.  Otherwise,  tableptr
-     must  be  the result of a call to pcre_maketables(). See the
-     section on locale support below.
-
-     The following option bits are defined in the header file:
-
-       PCRE_ANCHORED
-
-     If this bit is set, the pattern is forced to be  "anchored",
-     that is, it is constrained to match only at the start of the
-     string which is being searched (the "subject string").  This
-     effect can also be achieved by appropriate constructs in the
-     pattern itself, which is the only way to do it in Perl.
-
-       PCRE_CASELESS
-
-     If this bit is set, letters in the pattern match both  upper
-     and  lower  case  letters.  It  is  equivalent  to Perl's /i
-     option.
-
-       PCRE_DOLLAR_ENDONLY
-
-     If this bit is set, a dollar metacharacter  in  the  pattern
-     matches  only at the end of the subject string. Without this
-     option, a dollar also matches immediately before  the  final
-     character  if it is a newline (but not before any other new-
-     lines).  The  PCRE_DOLLAR_ENDONLY  option  is   ignored   if
-     PCRE_MULTILINE is set. There is no equivalent to this option
-     in Perl.
-
-       PCRE_DOTALL
-
-     If this bit is  set,  a  dot  metacharater  in  the  pattern
-     matches all characters, including newlines. Without it, new-
-     lines are excluded. This option is equivalent to  Perl's  /s
-     option.  A negative class such as [^a] always matches a new-
-     line character, independent of the setting of this option.
-
-       PCRE_EXTENDED
-
-     If this bit is set, whitespace data characters in  the  pat-
-     tern  are  totally  ignored  except when escaped or inside a
-     character class, and characters between an unescaped #  out-
-     side  a  character  class  and  the  next newline character,
-     inclusive, are also ignored. This is equivalent to Perl's /x
-     option,  and  makes  it  possible to include comments inside
-     complicated patterns. Note, however, that this applies  only
-     to  data  characters. Whitespace characters may never appear
-     within special character sequences in a pattern, for example
-     within  the sequence (?( which introduces a conditional sub-
-     pattern.
-
-       PCRE_EXTRA
-
-     This option was invented in  order  to  turn  on  additional
-     functionality of PCRE that is incompatible with Perl, but it
-     is currently of very little use. When set, any backslash  in
-     a  pattern  that is followed by a letter that has no special
-     meaning causes an error, thus reserving  these  combinations
-     for  future  expansion.  By default, as in Perl, a backslash
-     followed by a letter with no special meaning is treated as a
-     literal.  There  are at present no other features controlled
-     by this option. It can also be set by a (?X) option  setting
-     within a pattern.
-
-       PCRE_MULTILINE
-
-     By default, PCRE treats the subject string as consisting  of
-     a  single "line" of characters (even if it actually contains
-     several newlines). The "start  of  line"  metacharacter  (^)
-     matches  only  at the start of the string, while the "end of
-     line" metacharacter ($) matches  only  at  the  end  of  the
-     string,    or   before   a   terminating   newline   (unless
-     PCRE_DOLLAR_ENDONLY is set). This is the same as Perl.
-
-     When PCRE_MULTILINE it is set, the "start of line" and  "end
-     of  line"  constructs match immediately following or immedi-
-     ately before any newline  in  the  subject  string,  respec-
-     tively,  as  well  as  at  the  very  start and end. This is
-     equivalent to Perl's /m option. If there are no "\n" charac-
-     ters  in  a subject string, or no occurrences of ^ or $ in a
-     pattern, setting PCRE_MULTILINE has no effect.
-
-       PCRE_UNGREEDY
-
-     This option inverts the "greediness" of the  quantifiers  so
-     that  they  are  not greedy by default, but become greedy if
-     followed by "?". It is not compatible with Perl. It can also
-     be set by a (?U) option setting within the pattern.
-
-       PCRE_UTF8
-
-     This option causes PCRE to regard both the pattern  and  the
-     subject  as strings of UTF-8 characters instead of just byte
-     strings. However, it is available  only  if  PCRE  has  been
-     built  to  include  UTF-8  support.  If not, the use of this
-     option provokes an error. Support for UTF-8 is new,  experi-
-     mental,  and incomplete.  Details of exactly what it entails
-     are given below.
-
-
-
-STUDYING A PATTERN
-     When a pattern is going to be  used  several  times,  it  is
-     worth  spending  more time analyzing it in order to speed up
-     the time taken for matching. The function pcre_study() takes
-
-     a  pointer  to a compiled pattern as its first argument, and
-     returns a  pointer  to  a  pcre_extra  block  (another  void
-     typedef)  containing  additional  information about the pat-
-     tern; this can be passed to pcre_exec().  If  no  additional
-     information is available, NULL is returned.
-
-     The second argument contains option  bits.  At  present,  no
-     options  are  defined  for  pcre_study(),  and this argument
-     should always be zero.
-
-     The third argument for pcre_study() is a pointer to an error
-     message. If studying succeeds (even if no data is returned),
-     the variable it points to  is  set  to  NULL.  Otherwise  it
-     points to a textual error message.
-
-     At present, studying a  pattern  is  useful  only  for  non-
-     anchored  patterns  that do not have a single fixed starting
-     character. A  bitmap  of  possible  starting  characters  is
-     created.
-
-
-
-LOCALE SUPPORT
-     PCRE handles caseless matching, and determines whether char-
-     acters  are  letters, digits, or whatever, by reference to a
-     set of tables. The library contains a default set of  tables
-     which  is  created in the default C locale when PCRE is com-
-     piled.  This  is   used   when   the   final   argument   of
-     pcre_compile()  is NULL, and is sufficient for many applica-
-     tions.
-
-     An alternative set of tables can, however, be supplied. Such
-     tables  are built by calling the pcre_maketables() function,
-     which has no arguments, in the relevant locale.  The  result
-     can  then be passed to pcre_compile() as often as necessary.
-     For example, to build and use tables  that  are  appropriate
-     for  the French locale (where accented characters with codes
-     greater than 128 are treated as letters), the following code
-     could be used:
-
-       setlocale(LC_CTYPE, "fr");
-       tables = pcre_maketables();
-       re = pcre_compile(..., tables);
-
-     The  tables  are  built  in  memory  that  is  obtained  via
-     pcre_malloc.  The  pointer that is passed to pcre_compile is
-     saved with the compiled pattern, and  the  same  tables  are
-     used  via this pointer by pcre_study() and pcre_exec(). Thus
-     for any single pattern, compilation, studying  and  matching
-     all happen in the same locale, but different patterns can be
-     compiled in different locales. It is the caller's  responsi-
-     bility  to  ensure  that  the  memory  containing the tables
-     remains available for as long as it is needed.
-
-
-
-INFORMATION ABOUT A PATTERN
-     The pcre_fullinfo() function  returns  information  about  a
-     compiled pattern. It replaces the obsolete pcre_info() func-
-     tion, which is nevertheless retained for backwards compabil-
-     ity (and is documented below).
-
-     The first argument for pcre_fullinfo() is a pointer  to  the
-     compiled  pattern.  The  second  argument  is  the result of
-     pcre_study(), or NULL if the pattern was  not  studied.  The
-     third  argument  specifies  which  piece  of  information is
-     required, while the fourth argument is a pointer to a  vari-
-     able  to receive the data. The yield of the function is zero
-     for success, or one of the following negative numbers:
-
-       PCRE_ERROR_NULL       the argument code was NULL
-                             the argument where was NULL
-       PCRE_ERROR_BADMAGIC   the "magic number" was not found
-       PCRE_ERROR_BADOPTION  the value of what was invalid
-
-     The possible values for the third argument  are  defined  in
-     pcre.h, and are as follows:
-
-       PCRE_INFO_OPTIONS
-
-     Return a copy of the options with which the pattern was com-
-     piled.  The fourth argument should point to au unsigned long
-     int variable. These option bits are those specified  in  the
-     call  to  pcre_compile(),  modified  by any top-level option
-     settings  within  the   pattern   itself,   and   with   the
-     PCRE_ANCHORED  bit  forcibly  set if the form of the pattern
-     implies that it can match only at the  start  of  a  subject
-     string.
-
-       PCRE_INFO_SIZE
-
-     Return the size of the compiled pattern, that is, the  value
-     that  was  passed as the argument to pcre_malloc() when PCRE
-     was getting memory in which to place the compiled data.  The
-     fourth argument should point to a size_t variable.
-
-       PCRE_INFO_CAPTURECOUNT
-
-     Return the number of capturing subpatterns in  the  pattern.
-     The fourth argument should point to an int variable.
-
-       PCRE_INFO_BACKREFMAX
-
-     Return the number of  the  highest  back  reference  in  the
-     pattern.  The  fourth  argument should point to an int vari-
-     able. Zero is returned if there are no back references.
-
-       PCRE_INFO_FIRSTCHAR
-
-     Return information about the first character of any  matched
-     string,  for  a  non-anchored  pattern.  If there is a fixed
-     first   character,   e.g.   from   a   pattern    such    as
-     (cat|cow|coyote),  it  is returned in the integer pointed to
-     by where. Otherwise, if either
-
-     (a) the pattern was compiled with the PCRE_MULTILINE option,
-     and every branch starts with "^", or
-
-     (b) every  branch  of  the  pattern  starts  with  ".*"  and
-     PCRE_DOTALL is not set (if it were set, the pattern would be
-     anchored),
-
-     -1 is returned, indicating that the pattern matches only  at
-     the  start  of a subject string or after any "\n" within the
-     string. Otherwise -2 is returned.  For anchored patterns, -2
-     is returned.
-
-       PCRE_INFO_FIRSTTABLE
-
-     If the pattern was studied, and this resulted  in  the  con-
-     struction of a 256-bit table indicating a fixed set of char-
-     acters for the first character in  any  matching  string,  a
-     pointer   to  the  table  is  returned.  Otherwise  NULL  is
-     returned. The fourth argument should point  to  an  unsigned
-     char * variable.
-
-       PCRE_INFO_LASTLITERAL
-
-     For a non-anchored pattern, return the value of  the  right-
-     most  literal  character  which  must  exist  in any matched
-     string, other than at its start. The fourth argument  should
-     point  to an int variable. If there is no such character, or
-     if the pattern is anchored, -1 is returned. For example, for
-     the pattern /a\d+z\d+/ the returned value is 'z'.
-
-     The pcre_info() function is now obsolete because its  inter-
-     face  is  too  restrictive  to return all the available data
-     about  a  compiled  pattern.   New   programs   should   use
-     pcre_fullinfo()  instead.  The  yield  of pcre_info() is the
-     number of capturing subpatterns, or  one  of  the  following
-     negative numbers:
-
-       PCRE_ERROR_NULL       the argument code was NULL
-       PCRE_ERROR_BADMAGIC   the "magic number" was not found
-
-     If the optptr argument is not NULL, a copy  of  the  options
-     with which the pattern was compiled is placed in the integer
-     it points to (see PCRE_INFO_OPTIONS above).
-
-     If the pattern is not anchored and the firstcharptr argument
-     is  not  NULL, it is used to pass back information about the
-     first    character    of    any    matched    string    (see
-     PCRE_INFO_FIRSTCHAR above).
-
-
-
-MATCHING A PATTERN
-     The function pcre_exec() is called to match a subject string
-     against  a pre-compiled pattern, which is passed in the code
-     argument. If the pattern has been studied, the result of the
-     study should be passed in the extra argument. Otherwise this
-     must be NULL.
-
-     The PCRE_ANCHORED option can be passed in the options  argu-
-     ment,  whose unused bits must be zero. However, if a pattern
-     was  compiled  with  PCRE_ANCHORED,  or  turned  out  to  be
-     anchored  by  virtue  of  its  contents,  it  cannot be made
-     unachored at matching time.
-
-     There are also three further options that can be set only at
-     matching time:
-
-       PCRE_NOTBOL
-
-     The first character of the string is not the beginning of  a
-     line,  so  the  circumflex  metacharacter  should  not match
-     before it. Setting this without PCRE_MULTILINE  (at  compile
-     time) causes circumflex never to match.
-
-       PCRE_NOTEOL
-
-     The end of the string is not the end of a line, so the  dol-
-     lar  metacharacter should not match it nor (except in multi-
-     line mode) a newline immediately  before  it.  Setting  this
-     without PCRE_MULTILINE (at compile time) causes dollar never
-     to match.
-
-       PCRE_NOTEMPTY
-
-     An empty string is not considered to be  a  valid  match  if
-     this  option  is  set. If there are alternatives in the pat-
-     tern, they are tried. If  all  the  alternatives  match  the
-     empty  string,  the  entire match fails. For example, if the
-     pattern
-
-       a?b?
-
-     is applied to a string not beginning with  "a"  or  "b",  it
-     matches  the  empty string at the start of the subject. With
-     PCRE_NOTEMPTY set, this match is not valid, so PCRE searches
-     further into the string for occurrences of "a" or "b".
-
-     Perl has no direct equivalent of PCRE_NOTEMPTY, but it  does
-     make  a  special case of a pattern match of the empty string
-     within its split() function, and when using the /g modifier.
-     It  is possible to emulate Perl's behaviour after matching a
-     null string by first trying the  match  again  at  the  same
-     offset  with  PCRE_NOTEMPTY  set,  and then if that fails by
-     advancing the starting offset  (see  below)  and  trying  an
-     ordinary match again.
-
-     The subject string is passed as  a  pointer  in  subject,  a
-     length  in  length,  and  a  starting offset in startoffset.
-     Unlike the pattern string, it may contain binary zero  char-
-     acters.  When  the starting offset is zero, the search for a
-     match starts at the beginning of the subject, and this is by
-     far the most common case.
-
-     A non-zero starting offset  is  useful  when  searching  for
-     another  match  in  the  same subject by calling pcre_exec()
-     again after a previous success.  Setting startoffset differs
-     from  just  passing  over  a  shortened  string  and setting
-     PCRE_NOTBOL in the case of a pattern that  begins  with  any
-     kind of lookbehind. For example, consider the pattern
-
-       \Biss\B
-
-     which finds occurrences of "iss" in the middle of words. (\B
-     matches only if the current position in the subject is not a
-     word boundary.) When applied to the string "Mississipi"  the
-     first  call  to  pcre_exec()  finds the first occurrence. If
-     pcre_exec() is called again with just the remainder  of  the
-     subject,  namely  "issipi", it does not match, because \B is
-     always false at the start of the subject, which is deemed to
-     be  a  word  boundary. However, if pcre_exec() is passed the
-     entire string again, but with startoffset set to 4, it finds
-     the  second  occurrence  of "iss" because it is able to look
-     behind the starting point to discover that it is preceded by
-     a letter.
-
-     If a non-zero starting offset is passed when the pattern  is
-     anchored, one attempt to match at the given offset is tried.
-     This can only succeed if the pattern does  not  require  the
-     match to be at the start of the subject.
-
-     In general, a pattern matches a certain portion of the  sub-
-     ject,  and  in addition, further substrings from the subject
-     may be picked out by parts of  the  pattern.  Following  the
-     usage  in  Jeffrey Friedl's book, this is called "capturing"
-     in what follows, and the phrase  "capturing  subpattern"  is
-     used for a fragment of a pattern that picks out a substring.
-     PCRE supports several other kinds of  parenthesized  subpat-
-     tern that do not cause substrings to be captured.
-
-     Captured substrings are returned to the caller via a  vector
-     of  integer  offsets whose address is passed in ovector. The
-     number of elements in the vector is passed in ovecsize.  The
-     first two-thirds of the vector is used to pass back captured
-     substrings, each substring using a  pair  of  integers.  The
-     remaining  third  of  the  vector  is  used  as workspace by
-     pcre_exec() while matching capturing subpatterns, and is not
-     available for passing back information. The length passed in
-     ovecsize should always be a multiple of three. If it is not,
-     it is rounded down.
-
-     When a match has been successful, information about captured
-     substrings is returned in pairs of integers, starting at the
-     beginning of ovector, and continuing up to two-thirds of its
-     length  at  the  most. The first element of a pair is set to
-     the offset of the first character in a  substring,  and  the
-     second is set to the offset of the first character after the
-     end of a substring. The first  pair,  ovector[0]  and  ovec-
-     tor[1],  identify  the portion of the subject string matched
-     by the entire pattern. The next pair is used for  the  first
-     capturing  subpattern,  and  so  on.  The  value returned by
-     pcre_exec() is the number of pairs that have  been  set.  If
-     there  are no capturing subpatterns, the return value from a
-     successful match is 1, indicating that just the  first  pair
-     of offsets has been set.
-
-     Some convenience functions are provided for  extracting  the
-     captured substrings as separate strings. These are described
-     in the following section.
-
-     It is possible for an capturing  subpattern  number  n+1  to
-     match  some  part  of  the subject when subpattern n has not
-     been used at all.  For  example,  if  the  string  "abc"  is
-     matched  against the pattern (a|(z))(bc) subpatterns 1 and 3
-     are matched, but 2 is not. When this  happens,  both  offset
-     values corresponding to the unused subpattern are set to -1.
-
-     If a capturing subpattern is matched repeatedly, it  is  the
-     last  portion  of  the  string  that  it  matched  that gets
-     returned.
-
-     If the vector is too small to hold  all  the  captured  sub-
-     strings,  it is used as far as possible (up to two-thirds of
-     its length), and the function returns a value  of  zero.  In
-     particular,  if  the  substring offsets are not of interest,
-     pcre_exec() may be called with ovector passed  as  NULL  and
-     ovecsize  as  zero.  However,  if  the pattern contains back
-     references and the ovector isn't big enough to remember  the
-     related  substrings,  PCRE  has to get additional memory for
-     use during matching. Thus it is usually advisable to  supply
-     an ovector.
-
-     Note that pcre_info() can be used to find out how many  cap-
-     turing  subpatterns  there  are  in  a compiled pattern. The
-     smallest size for ovector that will  allow  for  n  captured
-     substrings  in  addition  to  the  offsets  of the substring
-     matched by the whole pattern is (n+1)*3.
-
-     If pcre_exec() fails, it returns a negative number. The fol-
-     lowing are defined in the header file:
-
-       PCRE_ERROR_NOMATCH        (-1)
-
-     The subject string did not match the pattern.
-
-       PCRE_ERROR_NULL           (-2)
-
-     Either code or subject was passed as NULL,  or  ovector  was
-     NULL and ovecsize was not zero.
-
-       PCRE_ERROR_BADOPTION      (-3)
-
-     An unrecognized bit was set in the options argument.
-
-       PCRE_ERROR_BADMAGIC       (-4)
-
-     PCRE stores a 4-byte "magic number" at the start of the com-
-     piled  code,  to  catch  the  case  when it is passed a junk
-     pointer. This is the error it gives when  the  magic  number
-     isn't present.
-
-       PCRE_ERROR_UNKNOWN_NODE   (-5)
-
-     While running the pattern match, an unknown item was encoun-
-     tered in the compiled pattern. This error could be caused by
-     a bug in PCRE or by overwriting of the compiled pattern.
-
-       PCRE_ERROR_NOMEMORY       (-6)
-
-     If a pattern contains back references, but the ovector  that
-     is  passed  to pcre_exec() is not big enough to remember the
-     referenced substrings, PCRE gets a block of  memory  at  the
-     start  of  matching to use for this purpose. If the call via
-     pcre_malloc() fails, this error  is  given.  The  memory  is
-     freed at the end of matching.
-
-
-
-EXTRACTING CAPTURED SUBSTRINGS
-     Captured substrings can be accessed directly  by  using  the
-
-
-
-
-
-SunOS 5.8                 Last change:                         12
-
-
-
-     offsets returned by pcre_exec() in ovector. For convenience,
-     the functions  pcre_copy_substring(),  pcre_get_substring(),
-     and  pcre_get_substring_list()  are  provided for extracting
-     captured  substrings  as  new,   separate,   zero-terminated
-     strings.   A  substring  that  contains  a  binary  zero  is
-     correctly extracted and has a further zero added on the end,
-     but the result does not, of course, function as a C string.
-
-     The first three arguments are the same for all  three  func-
-     tions:  subject  is  the  subject string which has just been
-     successfully matched, ovector is a pointer to the vector  of
-     integer   offsets   that  was  passed  to  pcre_exec(),  and
-     stringcount is the number of substrings that  were  captured
-     by  the  match,  including  the  substring  that matched the
-     entire regular expression. This is  the  value  returned  by
-     pcre_exec  if  it  is  greater  than  zero.  If  pcre_exec()
-     returned zero, indicating that it ran out of space in  ovec-
-     tor,  the  value passed as stringcount should be the size of
-     the vector divided by three.
-
-     The functions pcre_copy_substring() and pcre_get_substring()
-     extract a single substring, whose number is given as string-
-     number. A value of zero extracts the substring that  matched
-     the entire pattern, while higher values extract the captured
-     substrings. For pcre_copy_substring(), the string is  placed
-     in  buffer,  whose  length is given by buffersize, while for
-     pcre_get_substring() a new block of memory is  obtained  via
-     pcre_malloc,  and its address is returned via stringptr. The
-     yield of the function is  the  length  of  the  string,  not
-     including the terminating zero, or one of
-
-       PCRE_ERROR_NOMEMORY       (-6)
-
-     The buffer was too small for pcre_copy_substring(),  or  the
-     attempt to get memory failed for pcre_get_substring().
-
-       PCRE_ERROR_NOSUBSTRING    (-7)
-
-     There is no substring whose number is stringnumber.
-
-     The pcre_get_substring_list() function extracts  all  avail-
-     able  substrings  and builds a list of pointers to them. All
-     this is done in a single block of memory which  is  obtained
-     via pcre_malloc. The address of the memory block is returned
-     via listptr, which is also the start of the list  of  string
-     pointers.  The  end of the list is marked by a NULL pointer.
-     The yield of the function is zero if all went well, or
-
-       PCRE_ERROR_NOMEMORY       (-6)
-
-     if the attempt to get the memory block failed.
-
-     When any of these functions encounter a  substring  that  is
-     unset, which can happen when capturing subpattern number n+1
-     matches some part of the subject, but subpattern n  has  not
-     been  used  at all, they return an empty string. This can be
-     distinguished  from  a  genuine  zero-length  substring   by
-     inspecting the appropriate offset in ovector, which is nega-
-     tive for unset substrings.
-
-     The  two  convenience  functions  pcre_free_substring()  and
-     pcre_free_substring_list()  can  be  used to free the memory
-     returned by  a  previous  call  of  pcre_get_substring()  or
-     pcre_get_substring_list(),  respectively.  They  do  nothing
-     more than call the function pointed to by  pcre_free,  which
-     of  course  could  be called directly from a C program. How-
-     ever, PCRE is used in some situations where it is linked via
-     a  special  interface  to another programming language which
-     cannot use pcre_free directly; it is for  these  cases  that
-     the functions are provided.
-
-
-
-LIMITATIONS
-     There are some size limitations in PCRE but it is hoped that
-     they will never in practice be relevant.  The maximum length
-     of a compiled pattern is 65539 (sic) bytes.  All  values  in
-     repeating  quantifiers must be less than 65536.  The maximum
-     number of capturing subpatterns is 99.  The  maximum  number
-     of  all  parenthesized subpatterns, including capturing sub-
-     patterns, assertions, and other types of subpattern, is 200.
-
-     The maximum length of a subject string is the largest  posi-
-     tive number that an integer variable can hold. However, PCRE
-     uses recursion to handle subpatterns and indefinite  repeti-
-     tion.  This  means  that the available stack space may limit
-     the size of a subject string that can be processed  by  cer-
-     tain patterns.
-
-
-
-DIFFERENCES FROM PERL
-     The differences described here  are  with  respect  to  Perl
-     5.005.
-
-     1. By default, a whitespace character is any character  that
-     the  C  library  function isspace() recognizes, though it is
-     possible to compile PCRE  with  alternative  character  type
-     tables. Normally isspace() matches space, formfeed, newline,
-     carriage return, horizontal tab, and vertical tab. Perl 5 no
-     longer  includes vertical tab in its set of whitespace char-
-     acters. The \v escape that was in the Perl documentation for
-     a long time was never in fact recognized. However, the char-
-     acter itself was treated as whitespace at least up to 5.002.
-     In 5.004 and 5.005 it does not match \s.
-
-     2. PCRE does  not  allow  repeat  quantifiers  on  lookahead
-     assertions. Perl permits them, but they do not mean what you
-     might think. For example, (?!a){3} does not assert that  the
-     next  three characters are not "a". It just asserts that the
-     next character is not "a" three times.
-
-     3. Capturing subpatterns that occur inside  negative  looka-
-     head  assertions  are  counted,  but  their  entries  in the
-     offsets vector are never set. Perl sets its numerical  vari-
-     ables  from  any  such  patterns that are matched before the
-     assertion fails to match something (thereby succeeding), but
-     only  if  the negative lookahead assertion contains just one
-     branch.
-
-     4. Though binary zero characters are supported in  the  sub-
-     ject  string,  they  are  not  allowed  in  a pattern string
-     because it is passed as a normal  C  string,  terminated  by
-     zero. The escape sequence "\0" can be used in the pattern to
-     represent a binary zero.
-
-     5. The following Perl escape sequences  are  not  supported:
-     \l,  \u,  \L,  \U,  \E, \Q. In fact these are implemented by
-     Perl's general string-handling and are not part of its  pat-
-     tern matching engine.
-
-     6. The Perl \G assertion is  not  supported  as  it  is  not
-     relevant to single pattern matches.
-
-     7. Fairly obviously, PCRE does not support the (?{code}) and
-     (?p{code})  constructions. However, there is some experimen-
-     tal support for recursive patterns using the  non-Perl  item
-     (?R).
-
-     8. There are at the time of writing some  oddities  in  Perl
-     5.005_02  concerned  with  the  settings of captured strings
-     when part of a pattern is repeated.  For  example,  matching
-     "aba"  against the pattern /^(a(b)?)+$/ sets $2 to the value
-     "b", but matching "aabbaa" against /^(aa(bb)?)+$/ leaves  $2
-     unset.    However,    if   the   pattern   is   changed   to
-     /^(aa(b(b))?)+$/ then $2 (and $3) are set.
-
-     In Perl 5.004 $2 is set in both cases, and that is also true
-     of PCRE. If in the future Perl changes to a consistent state
-     that is different, PCRE may change to follow.
-
-     9. Another as yet unresolved discrepancy  is  that  in  Perl
-     5.005_02  the  pattern /^(a)?(?(1)a|b)+$/ matches the string
-     "a", whereas in PCRE it does not.  However, in both Perl and
-     PCRE /^(a)?a/ matched against "a" leaves $1 unset.
-
-     10. PCRE  provides  some  extensions  to  the  Perl  regular
-     expression facilities:
-
-     (a) Although lookbehind assertions must match  fixed  length
-     strings,  each  alternative branch of a lookbehind assertion
-     can match a different length of string. Perl 5.005  requires
-     them all to have the same length.
-
-     (b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is  not
-     set,  the  $ meta- character matches only at the very end of
-     the string.
-
-     (c) If PCRE_EXTRA is set, a backslash followed by  a  letter
-     with no special meaning is faulted.
-
-     (d) If PCRE_UNGREEDY is set, the greediness of  the  repeti-
-     tion  quantifiers  is inverted, that is, by default they are
-     not greedy, but if followed by a question mark they are.
-
-     (e) PCRE_ANCHORED can be used to force a pattern to be tried
-     only at the start of the subject.
-
-     (f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY  options
-     for pcre_exec() have no Perl equivalents.
-
-     (g) The (?R) construct allows for recursive pattern matching
-     (Perl  5.6 can do this using the (?p{code}) construct, which
-     PCRE cannot of course support.)
-
-
-
-REGULAR EXPRESSION DETAILS
-     The syntax and semantics of  the  regular  expressions  sup-
-     ported  by PCRE are described below. Regular expressions are
-     also described in the Perl documentation and in a number  of
-     other  books,  some  of which have copious examples. Jeffrey
-     Friedl's  "Mastering  Regular  Expressions",  published   by
-     O'Reilly (ISBN 1-56592-257), covers them in great detail.
-
-     The description here is intended as reference documentation.
-     The basic operation of PCRE is on strings of bytes. However,
-     there is the beginnings of some support for UTF-8  character
-     strings.  To  use  this  support  you must configure PCRE to
-     include it, and then call pcre_compile() with the  PCRE_UTF8
-     option.  How  this affects the pattern matching is described
-     in the final section of this document.
-
-     A regular expression is a pattern that is matched against  a
-     subject string from left to right. Most characters stand for
-     themselves in a pattern, and match the corresponding charac-
-     ters in the subject. As a trivial example, the pattern
-
-       The quick brown fox
-
-     matches a portion of a subject string that is  identical  to
-     itself.  The  power  of  regular  expressions comes from the
-     ability to include alternatives and repetitions in the  pat-
-     tern.  These  are encoded in the pattern by the use of meta-
-     characters, which do not stand for  themselves  but  instead
-     are interpreted in some special way.
-
-     There are two different sets of meta-characters: those  that
-     are  recognized anywhere in the pattern except within square
-     brackets, and those that are recognized in square  brackets.
-     Outside square brackets, the meta-characters are as follows:
-
-       \      general escape character with several uses
-       ^      assert start of  subject  (or  line,  in  multiline
-     mode)
-       $      assert end of subject (or line, in multiline mode)
-       .      match any character except newline (by default)
-       [      start character class definition
-       |      start of alternative branch
-       (      start subpattern
-       )      end subpattern
-       ?      extends the meaning of (
-              also 0 or 1 quantifier
-              also quantifier minimizer
-       *      0 or more quantifier
-       +      1 or more quantifier
-       {      start min/max quantifier
-
-     Part of a pattern that is in square  brackets  is  called  a
-     "character  class".  In  a  character  class  the only meta-
-     characters are:
-
-       \      general escape character
-       ^      negate the class, but only if the first character
-       -      indicates character range
-       ]      terminates the character class
-
-     The following sections describe  the  use  of  each  of  the
-     meta-characters.
-
-
-
-BACKSLASH
-     The backslash character has several uses. Firstly, if it  is
-     followed  by  a  non-alphameric character, it takes away any
-     special  meaning  that  character  may  have.  This  use  of
-     backslash  as  an  escape  character applies both inside and
-     outside character classes.
-
-     For example, if you want to match a "*" character, you write
-     "\*" in the pattern. This applies whether or not the follow-
-     ing character would otherwise  be  interpreted  as  a  meta-
-     character,  so it is always safe to precede a non-alphameric
-     with "\" to specify that it stands for itself.  In  particu-
-     lar, if you want to match a backslash, you write "\\".
-
-     If a pattern is compiled with the PCRE_EXTENDED option, whi-
-     tespace in the pattern (other than in a character class) and
-     characters between a "#" outside a character class  and  the
-     next  newline  character  are ignored. An escaping backslash
-     can be used to include a whitespace or "#" character as part
-     of the pattern.
-
-     A second use of backslash provides a way  of  encoding  non-
-     printing  characters  in patterns in a visible manner. There
-     is no restriction on the appearance of non-printing  charac-
-     ters,  apart from the binary zero that terminates a pattern,
-     but when a pattern is being prepared by text editing, it  is
-     usually  easier to use one of the following escape sequences
-     than the binary character it represents:
-
-       \a     alarm, that is, the BEL character (hex 07)
-       \cx    "control-x", where x is any character
-       \e     escape (hex 1B)
-       \f     formfeed (hex 0C)
-       \n     newline (hex 0A)
-       \r     carriage return (hex 0D)
-       \t     tab (hex 09)
-       \xhh   character with hex code hh
-       \ddd   character with octal code ddd, or backreference
-
-     The precise effect of "\cx" is as follows: if "x" is a lower
-     case  letter,  it  is converted to upper case. Then bit 6 of
-     the character (hex 40) is inverted.  Thus "\cz" becomes  hex
-     1A, but "\c{" becomes hex 3B, while "\c;" becomes hex 7B.
-
-     After "\x", up to two hexadecimal digits are  read  (letters
-     can be in upper or lower case).
-
-     After "\0" up to two further octal digits are read. In  both
-     cases,  if  there are fewer than two digits, just those that
-     are present are used. Thus the sequence "\0\x\07"  specifies
-     two binary zeros followed by a BEL character.  Make sure you
-     supply two digits after the initial zero  if  the  character
-     that follows is itself an octal digit.
-
-     The handling of a backslash followed by a digit other than 0
-     is  complicated.   Outside  a character class, PCRE reads it
-     and any following digits as a decimal number. If the  number
-     is  less  than  10, or if there have been at least that many
-     previous capturing left parentheses in the  expression,  the
-     entire  sequence is taken as a back reference. A description
-     of how this works is given later, following  the  discussion
-     of parenthesized subpatterns.
-
-     Inside a character  class,  or  if  the  decimal  number  is
-     greater  than  9 and there have not been that many capturing
-     subpatterns, PCRE re-reads up to three octal digits  follow-
-     ing  the  backslash,  and  generates  a single byte from the
-     least significant 8 bits of the value. Any subsequent digits
-     stand for themselves.  For example:
-
-       \040   is another way of writing a space
-       \40    is the same, provided there are fewer than 40
-                 previous capturing subpatterns
-       \7     is always a back reference
-       \11    might be a back reference, or another way of
-                 writing a tab
-       \011   is always a tab
-       \0113  is a tab followed by the character "3"
-       \113   is the character with octal code 113 (since there
-                 can be no more than 99 back references)
-       \377   is a byte consisting entirely of 1 bits
-       \81    is either a back reference, or a binary zero
-                 followed by the two characters "8" and "1"
-
-     Note that octal values of 100 or greater must not be  intro-
-     duced  by  a  leading zero, because no more than three octal
-     digits are ever read.
-
-     All the sequences that define a single  byte  value  can  be
-     used both inside and outside character classes. In addition,
-     inside a character class, the sequence "\b"  is  interpreted
-     as  the  backspace  character  (hex 08). Outside a character
-     class it has a different meaning (see below).
-
-     The third use of backslash is for specifying generic charac-
-     ter types:
-
-       \d     any decimal digit
-       \D     any character that is not a decimal digit
-       \s     any whitespace character
-       \S     any character that is not a whitespace character
-       \w     any "word" character
-       \W     any "non-word" character
-
-     Each pair of escape sequences partitions the complete set of
-     characters  into  two  disjoint  sets.  Any  given character
-     matches one, and only one, of each pair.
-
-     A "word" character is any letter or digit or the  underscore
-     character,  that  is,  any  character which can be part of a
-     Perl "word". The definition of letters and  digits  is  con-
-     trolled  by PCRE's character tables, and may vary if locale-
-     specific matching is  taking  place  (see  "Locale  support"
-     above). For example, in the "fr" (French) locale, some char-
-     acter codes greater than 128 are used for accented  letters,
-     and these are matched by \w.
-
-     These character type sequences can appear  both  inside  and
-     outside  character classes. They each match one character of
-     the appropriate type. If the current matching  point  is  at
-     the end of the subject string, all of them fail, since there
-     is no character to match.
-
-     The fourth use of backslash is  for  certain  simple  asser-
-     tions. An assertion specifies a condition that has to be met
-     at a particular point in  a  match,  without  consuming  any
-     characters  from  the subject string. The use of subpatterns
-     for more complicated  assertions  is  described  below.  The
-     backslashed assertions are
-
-       \b     word boundary
-       \B     not a word boundary
-       \A     start of subject (independent of multiline mode)
-       \Z     end of subject or newline at  end  (independent  of
-     multiline mode)
-       \z     end of subject (independent of multiline mode)
-
-     These assertions may not appear in  character  classes  (but
-     note that "\b" has a different meaning, namely the backspace
-     character, inside a character class).
-
-     A word boundary is a position in the  subject  string  where
-     the current character and the previous character do not both
-     match \w or \W (i.e. one matches \w and  the  other  matches
-     \W),  or the start or end of the string if the first or last
-     character matches \w, respectively.
-
-     The \A, \Z, and \z assertions differ  from  the  traditional
-     circumflex  and  dollar  (described below) in that they only
-     ever match at the very start and end of the subject  string,
-     whatever  options  are  set.  They  are  not affected by the
-     PCRE_NOTBOL or PCRE_NOTEOL options. If the startoffset argu-
-     ment  of  pcre_exec()  is  non-zero, \A can never match. The
-     difference between \Z and \z is that  \Z  matches  before  a
-     newline  that is the last character of the string as well as
-     at the end of the string, whereas \z  matches  only  at  the
-     end.
-
-
-
-CIRCUMFLEX AND DOLLAR
-     Outside a character class, in the default matching mode, the
-     circumflex  character  is an assertion which is true only if
-     the current matching point is at the start  of  the  subject
-
-     string.  If  the startoffset argument of pcre_exec() is non-
-     zero, circumflex can never match. Inside a character  class,
-     circumflex has an entirely different meaning (see below).
-
-     Circumflex need not be the first character of the pattern if
-     a  number of alternatives are involved, but it should be the
-     first thing in each alternative in which it appears  if  the
-     pattern is ever to match that branch. If all possible alter-
-     natives start with a circumflex, that is, if the pattern  is
-     constrained to match only at the start of the subject, it is
-     said to be an "anchored" pattern. (There are also other con-
-     structs that can cause a pattern to be anchored.)
-
-     A dollar character is an assertion which is true only if the
-     current  matching point is at the end of the subject string,
-     or immediately before a newline character that is  the  last
-     character in the string (by default). Dollar need not be the
-     last character of the pattern if a  number  of  alternatives
-     are  involved,  but it should be the last item in any branch
-     in which it appears.  Dollar has no  special  meaning  in  a
-     character class.
-
-     The meaning of dollar can be changed so that it matches only
-     at   the   very   end   of   the   string,  by  setting  the
-     PCRE_DOLLAR_ENDONLY option at compile or matching time. This
-     does not affect the \Z assertion.
-
-     The meanings of the circumflex  and  dollar  characters  are
-     changed  if  the  PCRE_MULTILINE option is set. When this is
-     the case,  they  match  immediately  after  and  immediately
-     before an internal "\n" character, respectively, in addition
-     to matching at the start and end of the subject string.  For
-     example,  the  pattern  /^abc$/  matches  the subject string
-     "def\nabc" in multiline  mode,  but  not  otherwise.  Conse-
-     quently,  patterns  that  are  anchored  in single line mode
-     because all branches start with "^" are not anchored in mul-
-     tiline mode, and a match for circumflex is possible when the
-     startoffset  argument  of  pcre_exec()  is   non-zero.   The
-     PCRE_DOLLAR_ENDONLY  option  is ignored if PCRE_MULTILINE is
-     set.
-
-     Note that the sequences \A, \Z, and \z can be used to  match
-     the  start  and end of the subject in both modes, and if all
-     branches of a pattern start with \A is it  always  anchored,
-     whether PCRE_MULTILINE is set or not.
-
-
-
-FULL STOP (PERIOD, DOT)
-     Outside a character class, a dot in the pattern matches  any
-     one character in the subject, including a non-printing char-
-     acter, but not (by default)  newline.   If  the  PCRE_DOTALL
-
-     option  is set, dots match newlines as well. The handling of
-     dot is entirely independent of the  handling  of  circumflex
-     and  dollar,  the  only  relationship  being  that they both
-     involve newline characters. Dot has no special meaning in  a
-     character class.
-
-
-
-SQUARE BRACKETS
-     An opening square bracket introduces a character class, ter-
-     minated  by  a  closing  square  bracket.  A  closing square
-     bracket on its own is  not  special.  If  a  closing  square
-     bracket  is  required as a member of the class, it should be
-     the first data character in the class (after an initial cir-
-     cumflex, if present) or escaped with a backslash.
-
-     A character class matches a single character in the subject;
-     the  character  must  be in the set of characters defined by
-     the class, unless the first character in the class is a cir-
-     cumflex,  in which case the subject character must not be in
-     the set defined by the class. If a  circumflex  is  actually
-     required  as  a  member  of  the class, ensure it is not the
-     first character, or escape it with a backslash.
-
-     For example, the character class [aeiou] matches  any  lower
-     case vowel, while [^aeiou] matches any character that is not
-     a lower case vowel. Note that a circumflex is  just  a  con-
-     venient  notation for specifying the characters which are in
-     the class by enumerating those that are not. It  is  not  an
-     assertion:  it  still  consumes a character from the subject
-     string, and fails if the current pointer is at  the  end  of
-     the string.
-
-     When caseless matching  is  set,  any  letters  in  a  class
-     represent  both their upper case and lower case versions, so
-     for example, a caseless [aeiou] matches "A" as well as  "a",
-     and  a caseless [^aeiou] does not match "A", whereas a case-
-     ful version would.
-
-     The newline character is never treated in any special way in
-     character  classes,  whatever the setting of the PCRE_DOTALL
-     or PCRE_MULTILINE options is. A  class  such  as  [^a]  will
-     always match a newline.
-
-     The minus (hyphen) character can be used to specify a  range
-     of  characters  in  a  character  class.  For example, [d-m]
-     matches any letter between d and m, inclusive.  If  a  minus
-     character  is required in a class, it must be escaped with a
-     backslash or appear in a position where it cannot be  inter-
-     preted as indicating a range, typically as the first or last
-     character in the class.
-
-     It is not possible to have the literal character "]" as  the
-     end  character  of  a  range.  A  pattern such as [W-]46] is
-     interpreted as a class of two characters ("W" and "-")  fol-
-     lowed by a literal string "46]", so it would match "W46]" or
-     "-46]". However, if the "]" is escaped with a  backslash  it
-     is  interpreted  as  the end of range, so [W-\]46] is inter-
-     preted as a single class containing a range followed by  two
-     separate characters. The octal or hexadecimal representation
-     of "]" can also be used to end a range.
-
-     Ranges operate in ASCII collating sequence. They can also be
-     used  for  characters  specified  numerically,  for  example
-     [\000-\037]. If a range that includes letters is  used  when
-     caseless  matching  is set, it matches the letters in either
-     case. For example, [W-c] is equivalent  to  [][\^_`wxyzabc],
-     matched  caselessly,  and  if  character tables for the "fr"
-     locale are in use, [\xc8-\xcb] matches accented E characters
-     in both cases.
-
-     The character types \d, \D, \s, \S,  \w,  and  \W  may  also
-     appear  in  a  character  class, and add the characters that
-     they match to the class. For example, [\dABCDEF] matches any
-     hexadecimal  digit.  A  circumflex  can conveniently be used
-     with the upper case character types to specify a  more  res-
-     tricted set of characters than the matching lower case type.
-     For example, the class [^\W_] matches any letter  or  digit,
-     but not underscore.
-
-     All non-alphameric characters other than \,  -,  ^  (at  the
-     start)  and  the  terminating ] are non-special in character
-     classes, but it does no harm if they are escaped.
-
-
-
-POSIX CHARACTER CLASSES
-     Perl 5.6 (not yet released at the time of writing) is  going
-     to  support  the POSIX notation for character classes, which
-     uses names enclosed by  [:  and  :]   within  the  enclosing
-     square brackets. PCRE supports this notation. For example,
-
-       [01[:alpha:]%]
-
-     matches "0", "1", any alphabetic character, or "%". The sup-
-     ported class names are
-
-       alnum    letters and digits
-       alpha    letters
-       ascii    character codes 0 - 127
-       cntrl    control characters
-       digit    decimal digits (same as \d)
-       graph    printing characters, excluding space
-       lower    lower case letters
-       print    printing characters, including space
-       punct    printing characters, excluding letters and digits
-       space    white space (same as \s)
-       upper    upper case letters
-       word     "word" characters (same as \w)
-       xdigit   hexadecimal digits
-
-     The names "ascii" and "word" are  Perl  extensions.  Another
-     Perl  extension is negation, which is indicated by a ^ char-
-     acter after the colon. For example,
-
-       [12[:^digit:]]
-
-     matches "1", "2", or any non-digit.  PCRE  (and  Perl)  also
-     recogize  the POSIX syntax [.ch.] and [=ch=] where "ch" is a
-     "collating element", but these are  not  supported,  and  an
-     error is given if they are encountered.
-
-
-
-VERTICAL BAR
-     Vertical bar characters are  used  to  separate  alternative
-     patterns. For example, the pattern
-
-       gilbert|sullivan
-
-     matches either "gilbert" or "sullivan". Any number of alter-
-     natives  may  appear,  and an empty alternative is permitted
-     (matching the empty string).   The  matching  process  tries
-     each  alternative in turn, from left to right, and the first
-     one that succeeds is used. If the alternatives are within  a
-     subpattern  (defined  below),  "succeeds" means matching the
-     rest of the main pattern as well as the alternative  in  the
-     subpattern.
-
-
-
-INTERNAL OPTION SETTING
-     The settings of PCRE_CASELESS, PCRE_MULTILINE,  PCRE_DOTALL,
-     and  PCRE_EXTENDED can be changed from within the pattern by
-     a sequence of Perl option letters enclosed between "(?"  and
-     ")". The option letters are
-
-       i  for PCRE_CASELESS
-       m  for PCRE_MULTILINE
-       s  for PCRE_DOTALL
-       x  for PCRE_EXTENDED
-
-     For example, (?im) sets caseless, multiline matching. It  is
-     also possible to unset these options by preceding the letter
-     with a hyphen, and a combined setting and unsetting such  as
-     (?im-sx),  which sets PCRE_CASELESS and PCRE_MULTILINE while
-     unsetting PCRE_DOTALL and PCRE_EXTENDED, is also  permitted.
-     If  a  letter  appears both before and after the hyphen, the
-     option is unset.
-
-     The scope of these option changes depends on  where  in  the
-     pattern  the  setting  occurs. For settings that are outside
-     any subpattern (defined below), the effect is the same as if
-     the  options were set or unset at the start of matching. The
-     following patterns all behave in exactly the same way:
-
-       (?i)abc
-       a(?i)bc
-       ab(?i)c
-       abc(?i)
-
-     which in turn is the same as compiling the pattern abc  with
-     PCRE_CASELESS  set.   In  other words, such "top level" set-
-     tings apply to the whole pattern  (unless  there  are  other
-     changes  inside subpatterns). If there is more than one set-
-     ting of the same option at top level, the rightmost  setting
-     is used.
-
-     If an option change occurs inside a subpattern,  the  effect
-     is  different.  This is a change of behaviour in Perl 5.005.
-     An option change inside a subpattern affects only that  part
-     of the subpattern that follows it, so
-
-       (a(?i)b)c
-
-     matches  abc  and  aBc  and  no  other   strings   (assuming
-     PCRE_CASELESS  is  not used).  By this means, options can be
-     made to have different settings in different  parts  of  the
-     pattern.  Any  changes  made  in one alternative do carry on
-     into subsequent branches within  the  same  subpattern.  For
-     example,
-
-       (a(?i)b|c)
-
-     matches "ab", "aB", "c", and "C", even though when  matching
-     "C" the first branch is abandoned before the option setting.
-     This is because the effects of  option  settings  happen  at
-     compile  time. There would be some very weird behaviour oth-
-     erwise.
-
-     The PCRE-specific options PCRE_UNGREEDY and  PCRE_EXTRA  can
-     be changed in the same way as the Perl-compatible options by
-     using the characters U and X  respectively.  The  (?X)  flag
-     setting  is  special in that it must always occur earlier in
-     the pattern than any of the additional features it turns on,
-     even when it is at top level. It is best put at the start.
-
-
-
-SUBPATTERNS
-     Subpatterns are delimited by parentheses  (round  brackets),
-     which can be nested.  Marking part of a pattern as a subpat-
-     tern does two things:
-
-     1. It localizes a set of alternatives. For example, the pat-
-     tern
-
-       cat(aract|erpillar|)
-
-     matches one of the words "cat",  "cataract",  or  "caterpil-
-     lar".  Without  the  parentheses, it would match "cataract",
-     "erpillar" or the empty string.
-
-     2. It sets up the subpattern as a capturing  subpattern  (as
-     defined  above).   When the whole pattern matches, that por-
-     tion of the subject string that matched  the  subpattern  is
-     passed  back  to  the  caller  via  the  ovector argument of
-     pcre_exec(). Opening parentheses are counted  from  left  to
-     right (starting from 1) to obtain the numbers of the captur-
-     ing subpatterns.
-
-     For example, if the string "the red king" is matched against
-     the pattern
-
-       the ((red|white) (king|queen))
-
-     the captured substrings are "red king", "red",  and  "king",
-     and are numbered 1, 2, and 3.
-
-     The fact that plain parentheses fulfil two functions is  not
-     always  helpful.  There are often times when a grouping sub-
-     pattern is required without a capturing requirement.  If  an
-     opening parenthesis is followed by "?:", the subpattern does
-     not do any capturing, and is not counted when computing  the
-     number of any subsequent capturing subpatterns. For example,
-     if the string "the white queen" is matched against the  pat-
-     tern
-
-       the ((?:red|white) (king|queen))
-
-     the captured substrings are "white queen" and  "queen",  and
-     are  numbered  1  and 2. The maximum number of captured sub-
-     strings is 99, and the maximum number  of  all  subpatterns,
-     both capturing and non-capturing, is 200.
-
-     As a  convenient  shorthand,  if  any  option  settings  are
-     required  at  the  start  of a non-capturing subpattern, the
-     option letters may appear between the "?" and the ":".  Thus
-     the two patterns
-
-       (?i:saturday|sunday)
-       (?:(?i)saturday|sunday)
-
-     match exactly the same set of strings.  Because  alternative
-     branches  are  tried from left to right, and options are not
-     reset until the end of the subpattern is reached, an  option
-     setting  in  one  branch does affect subsequent branches, so
-     the above patterns match "SUNDAY" as well as "Saturday".
-
-
-
-REPETITION
-     Repetition is specified by quantifiers, which can follow any
-     of the following items:
-
-       a single character, possibly escaped
-       the . metacharacter
-       a character class
-       a back reference (see next section)
-       a parenthesized subpattern (unless it is  an  assertion  -
-     see below)
-
-     The general repetition quantifier specifies  a  minimum  and
-     maximum  number  of  permitted  matches,  by  giving the two
-     numbers in curly brackets (braces), separated  by  a  comma.
-     The  numbers  must be less than 65536, and the first must be
-     less than or equal to the second. For example:
-
-       z{2,4}
-
-     matches "zz", "zzz", or "zzzz". A closing brace on  its  own
-     is not a special character. If the second number is omitted,
-     but the comma is present, there is no upper  limit;  if  the
-     second number and the comma are both omitted, the quantifier
-     specifies an exact number of required matches. Thus
-
-       [aeiou]{3,}
-
-     matches at least 3 successive vowels,  but  may  match  many
-     more, while
-
-       \d{8}
-
-     matches exactly 8 digits.  An  opening  curly  bracket  that
-     appears  in a position where a quantifier is not allowed, or
-     one that does not match the syntax of a quantifier, is taken
-     as  a literal character. For example, {,6} is not a quantif-
-     ier, but a literal string of four characters.
-
-     The quantifier {0} is permitted, causing the  expression  to
-     behave  as  if the previous item and the quantifier were not
-     present.
-
-     For convenience (and  historical  compatibility)  the  three
-     most common quantifiers have single-character abbreviations:
-
-       *    is equivalent to {0,}
-       +    is equivalent to {1,}
-       ?    is equivalent to {0,1}
-
-     It is possible to construct infinite loops  by  following  a
-     subpattern  that  can  match no characters with a quantifier
-     that has no upper limit, for example:
-
-       (a?)*
-
-     Earlier versions of Perl and PCRE used to give an  error  at
-     compile  time  for such patterns. However, because there are
-     cases where this  can  be  useful,  such  patterns  are  now
-     accepted,  but  if  any repetition of the subpattern does in
-     fact match no characters, the loop is forcibly broken.
-
-     By default, the quantifiers  are  "greedy",  that  is,  they
-     match  as much as possible (up to the maximum number of per-
-     mitted times), without causing the rest of  the  pattern  to
-     fail. The classic example of where this gives problems is in
-     trying to match comments in C programs. These appear between
-     the  sequences /* and */ and within the sequence, individual
-     * and / characters may appear. An attempt to  match  C  com-
-     ments by applying the pattern
-
-       /\*.*\*/
-
-     to the string
-
-       /* first command */  not comment  /* second comment */
-
-     fails, because it matches the entire  string  owing  to  the
-     greediness of the .*  item.
-
-     However, if a quantifier is followed by a question mark,  it
-     ceases  to be greedy, and instead matches the minimum number
-     of times possible, so the pattern
-
-       /\*.*?\*/
-
-     does the right thing with the C comments. The meaning of the
-     various  quantifiers is not otherwise changed, just the pre-
-     ferred number of matches.  Do not confuse this use of  ques-
-     tion  mark  with  its  use as a quantifier in its own right.
-     Because it has two uses, it can sometimes appear doubled, as
-     in
-
-       \d??\d
-
-     which matches one digit by preference, but can match two  if
-     that is the only way the rest of the pattern matches.
-
-     If the PCRE_UNGREEDY option is set (an option which  is  not
-     available  in  Perl),  the  quantifiers  are  not  greedy by
-     default, but individual ones can be made greedy by following
-     them  with  a  question mark. In other words, it inverts the
-     default behaviour.
-
-     When a parenthesized subpattern is quantified with a minimum
-     repeat  count  that is greater than 1 or with a limited max-
-     imum, more store is required for the  compiled  pattern,  in
-     proportion to the size of the minimum or maximum.
-
-     If a pattern starts with .* or  .{0,}  and  the  PCRE_DOTALL
-     option (equivalent to Perl's /s) is set, thus allowing the .
-     to match  newlines,  the  pattern  is  implicitly  anchored,
-     because whatever follows will be tried against every charac-
-     ter position in the subject string, so there is no point  in
-     retrying  the overall match at any position after the first.
-     PCRE treats such a pattern as though it were preceded by \A.
-     In  cases where it is known that the subject string contains
-     no newlines, it is worth setting PCRE_DOTALL when  the  pat-
-     tern begins with .* in order to obtain this optimization, or
-     alternatively using ^ to indicate anchoring explicitly.
-
-     When a capturing subpattern is repeated, the value  captured
-     is the substring that matched the final iteration. For exam-
-     ple, after
-
-       (tweedle[dume]{3}\s*)+
-
-     has matched "tweedledum tweedledee" the value  of  the  cap-
-     tured  substring  is  "tweedledee".  However,  if  there are
-     nested capturing  subpatterns,  the  corresponding  captured
-     values  may  have been set in previous iterations. For exam-
-     ple, after
-
-       /(a|(b))+/
-
-     matches "aba" the value of the second captured substring  is
-     "b".
-
-
-
-BACK REFERENCES
-     Outside a character class, a backslash followed by  a  digit
-     greater  than  0  (and  possibly  further  digits) is a back
-     reference to a capturing subpattern  earlier  (i.e.  to  its
-     left)  in  the  pattern,  provided there have been that many
-     previous capturing left parentheses.
-
-     However, if the decimal number following  the  backslash  is
-     less  than  10,  it is always taken as a back reference, and
-     causes an error only if there are not  that  many  capturing
-     left  parentheses in the entire pattern. In other words, the
-     parentheses that are referenced need not be to the  left  of
-     the  reference  for  numbers  less  than 10. See the section
-     entitled "Backslash" above for further details of  the  han-
-     dling of digits following a backslash.
-
-     A back reference matches whatever actually matched the  cap-
-     turing subpattern in the current subject string, rather than
-     anything matching the subpattern itself. So the pattern
-
-       (sens|respons)e and \1ibility
-
-     matches "sense and sensibility" and "response and  responsi-
-     bility",  but  not  "sense  and  responsibility". If caseful
-     matching is in force at the time of the back reference,  the
-     case of letters is relevant. For example,
-
-       ((?i)rah)\s+\1
-
-     matches "rah rah" and "RAH RAH", but  not  "RAH  rah",  even
-     though  the  original  capturing subpattern is matched case-
-     lessly.
-
-     There may be more than one back reference to the  same  sub-
-     pattern.  If  a  subpattern  has not actually been used in a
-     particular match, any back references to it always fail. For
-     example, the pattern
-
-       (a|(bc))\2
-
-     always fails if it starts to match  "a"  rather  than  "bc".
-     Because  there  may  be up to 99 back references, all digits
-     following the backslash are taken as  part  of  a  potential
-     back reference number. If the pattern continues with a digit
-     character, some delimiter must be used to terminate the back
-     reference.   If the PCRE_EXTENDED option is set, this can be
-     whitespace. Otherwise an empty comment can be used.
-
-     A back reference that occurs inside the parentheses to which
-     it  refers  fails when the subpattern is first used, so, for
-     example, (a\1) never matches.  However, such references  can
-     be useful inside repeated subpatterns. For example, the pat-
-     tern
-
-       (a|b\1)+
-
-     matches any number of "a"s and also "aba", "ababbaa" etc. At
-     each iteration of the subpattern, the back reference matches
-     the  character  string   corresponding   to   the   previous
-     iteration.  In  order  for this to work, the pattern must be
-     such that the first iteration does not  need  to  match  the
-     back  reference.  This  can be done using alternation, as in
-     the example above, or by a  quantifier  with  a  minimum  of
-     zero.
-
-
-
-ASSERTIONS
-     An assertion is  a  test  on  the  characters  following  or
-     preceding  the current matching point that does not actually
-     consume any characters. The simple assertions coded  as  \b,
-     \B,  \A,  \Z,  \z, ^ and $ are described above. More compli-
-     cated assertions are coded as  subpatterns.  There  are  two
-     kinds:  those that look ahead of the current position in the
-     subject string, and those that look behind it.
-
-     An assertion subpattern is matched in the normal way, except
-     that  it  does not cause the current matching position to be
-     changed. Lookahead assertions start with  (?=  for  positive
-     assertions and (?! for negative assertions. For example,
-
-       \w+(?=;)
-
-     matches a word followed by a semicolon, but does not include
-     the semicolon in the match, and
-
-       foo(?!bar)
-
-     matches any occurrence of "foo"  that  is  not  followed  by
-     "bar". Note that the apparently similar pattern
-
-       (?!foo)bar
-
-     does not find an occurrence of "bar"  that  is  preceded  by
-     something other than "foo"; it finds any occurrence of "bar"
-     whatsoever, because the assertion  (?!foo)  is  always  true
-     when  the  next  three  characters  are  "bar". A lookbehind
-     assertion is needed to achieve this effect.
-
-     Lookbehind assertions start with (?<=  for  positive  asser-
-     tions and (?<! for negative assertions. For example,
-
-       (?<!foo)bar
-
-     does find an occurrence of "bar" that  is  not  preceded  by
-     "foo". The contents of a lookbehind assertion are restricted
-     such that all the strings  it  matches  must  have  a  fixed
-     length.  However, if there are several alternatives, they do
-     not all have to have the same fixed length. Thus
-
-       (?<=bullock|donkey)
-
-     is permitted, but
-
-       (?<!dogs?|cats?)
-
-     causes an error at compile time. Branches  that  match  dif-
-     ferent length strings are permitted only at the top level of
-     a lookbehind assertion. This is an extension  compared  with
-     Perl  5.005,  which  requires all branches to match the same
-     length of string. An assertion such as
-
-       (?<=ab(c|de))
-
-     is not permitted, because its single  top-level  branch  can
-     match two different lengths, but it is acceptable if rewrit-
-     ten to use two top-level branches:
-
-       (?<=abc|abde)
-
-     The implementation of lookbehind  assertions  is,  for  each
-     alternative,  to  temporarily move the current position back
-     by the fixed width and then  try  to  match.  If  there  are
-     insufficient  characters  before  the  current position, the
-     match is deemed to fail.  Lookbehinds  in  conjunction  with
-     once-only  subpatterns can be particularly useful for match-
-     ing at the ends of strings; an example is given at  the  end
-     of the section on once-only subpatterns.
-
-     Several assertions (of any sort) may  occur  in  succession.
-     For example,
-
-       (?<=\d{3})(?<!999)foo
-
-     matches "foo" preceded by three digits that are  not  "999".
-     Notice  that each of the assertions is applied independently
-     at the same point in the subject string. First  there  is  a
-     check that the previous three characters are all digits, and
-     then there is a check that the same three characters are not
-     "999".   This  pattern  does not match "foo" preceded by six
-     characters, the first of which are digits and the last three
-     of  which  are  not  "999".  For  example,  it doesn't match
-     "123abcfoo". A pattern to do that is
-
-       (?<=\d{3}...)(?<!999)foo
-
-     This time the first assertion looks  at  the  preceding  six
-     characters,  checking  that  the first three are digits, and
-     then the second assertion checks that  the  preceding  three
-     characters are not "999".
-
-     Assertions can be nested in any combination. For example,
-
-       (?<=(?<!foo)bar)baz
-
-     matches an occurrence of "baz" that  is  preceded  by  "bar"
-     which in turn is not preceded by "foo", while
-
-       (?<=\d{3}(?!999)...)foo
-
-     is another pattern which matches  "foo"  preceded  by  three
-     digits and any three characters that are not "999".
-
-     Assertion subpatterns are not capturing subpatterns, and may
-     not  be  repeated,  because  it makes no sense to assert the
-     same thing several times. If any kind of assertion  contains
-     capturing  subpatterns  within it, these are counted for the
-     purposes of numbering the capturing subpatterns in the whole
-     pattern.   However,  substring capturing is carried out only
-     for positive assertions, because it does not make sense  for
-     negative assertions.
-
-     Assertions count towards the maximum  of  200  parenthesized
-     subpatterns.
-
-
-
-ONCE-ONLY SUBPATTERNS
-     With both maximizing and minimizing repetition,  failure  of
-     what  follows  normally  causes  the repeated item to be re-
-     evaluated to see if a different number of repeats allows the
-     rest  of  the  pattern  to  match. Sometimes it is useful to
-     prevent this, either to change the nature of the  match,  or
-     to  cause  it fail earlier than it otherwise might, when the
-     author of the pattern knows there is no  point  in  carrying
-     on.
-
-     Consider, for example, the pattern \d+foo  when  applied  to
-     the subject line
-
-       123456bar
-
-     After matching all 6 digits and then failing to match "foo",
-     the normal action of the matcher is to try again with only 5
-     digits matching the \d+ item, and then with 4,  and  so  on,
-     before ultimately failing. Once-only subpatterns provide the
-     means for specifying that once a portion of the pattern  has
-     matched,  it  is  not to be re-evaluated in this way, so the
-     matcher would give up immediately on failing to match  "foo"
-     the  first  time.  The  notation  is another kind of special
-     parenthesis, starting with (?> as in this example:
-
-       (?>\d+)bar
-
-     This kind of parenthesis "locks up" the  part of the pattern
-     it  contains once it has matched, and a failure further into
-     the  pattern  is  prevented  from  backtracking   into   it.
-     Backtracking  past  it  to previous items, however, works as
-     normal.
-
-     An alternative description is that a subpattern of this type
-     matches  the  string  of  characters that an identical stan-
-     dalone pattern would match, if anchored at the current point
-     in the subject string.
-
-     Once-only subpatterns are not capturing subpatterns.  Simple
-     cases  such as the above example can be thought of as a max-
-     imizing repeat that must  swallow  everything  it  can.  So,
-     while both \d+ and \d+? are prepared to adjust the number of
-     digits they match in order to make the rest of  the  pattern
-     match, (?>\d+) can only match an entire sequence of digits.
-
-     This construction can of course contain arbitrarily  compli-
-     cated subpatterns, and it can be nested.
-
-     Once-only subpatterns can be used in conjunction with  look-
-     behind  assertions  to specify efficient matching at the end
-     of the subject string. Consider a simple pattern such as
-
-       abcd$
-
-     when applied to a long string which does not match.  Because
-     matching  proceeds  from  left  to right, PCRE will look for
-     each "a" in the subject and then see if what follows matches
-     the rest of the pattern. If the pattern is specified as
-
-       ^.*abcd$
-
-     the initial .* matches the entire string at first, but  when
-     this  fails  (because  there  is no following "a"), it back-
-     tracks to match all but the last character, then all but the
-     last  two  characters,  and so on. Once again the search for
-     "a" covers the entire string, from right to left, so we  are
-     no better off. However, if the pattern is written as
-
-       ^(?>.*)(?<=abcd)
-
-     there can be no backtracking for the .* item; it  can  match
-     only  the entire string. The subsequent lookbehind assertion
-     does a single test on the last four characters. If it fails,
-     the match fails immediately. For long strings, this approach
-     makes a significant difference to the processing time.
-
-     When a pattern contains an unlimited repeat inside a subpat-
-     tern  that  can  itself  be  repeated an unlimited number of
-     times, the use of a once-only subpattern is the only way  to
-     avoid  some  failing matches taking a very long time indeed.
-     The pattern
-
-       (\D+|<\d+>)*[!?]
-
-     matches an unlimited number of substrings that  either  con-
-     sist  of  non-digits,  or digits enclosed in <>, followed by
-     either ! or ?. When it matches, it runs quickly. However, if
-     it is applied to
-
-       aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
-
-     it takes a long  time  before  reporting  failure.  This  is
-     because the string can be divided between the two repeats in
-     a large number of ways, and all have to be tried. (The exam-
-     ple  used  [!?]  rather  than a single character at the end,
-     because both PCRE and Perl have an optimization that  allows
-     for  fast  failure  when  a  single  character is used. They
-     remember the last single character that is  required  for  a
-     match,  and  fail early if it is not present in the string.)
-     If the pattern is changed to
-
-       ((?>\D+)|<\d+>)*[!?]
-
-     sequences of non-digits cannot be broken, and  failure  hap-
-     pens quickly.
-
-
-
-CONDITIONAL SUBPATTERNS
-     It is possible to cause the matching process to obey a  sub-
-     pattern  conditionally  or to choose between two alternative
-     subpatterns, depending on the result  of  an  assertion,  or
-     whether  a previous capturing subpattern matched or not. The
-     two possible forms of conditional subpattern are
-
-       (?(condition)yes-pattern)
-       (?(condition)yes-pattern|no-pattern)
-
-     If the condition is satisfied, the yes-pattern is used; oth-
-     erwise  the  no-pattern  (if  present) is used. If there are
-     more than two alternatives in the subpattern, a compile-time
-     error occurs.
-
-     There are two kinds of condition. If the  text  between  the
-     parentheses  consists of a sequence of digits, the condition
-     is satisfied if the capturing subpattern of that number  has
-     previously  matched.  The  number must be greater than zero.
-     Consider  the  following  pattern,   which   contains   non-
-     significant white space to make it more readable (assume the
-     PCRE_EXTENDED option) and to divide it into three parts  for
-     ease of discussion:
-
-       ( \( )?    [^()]+    (?(1) \) )
-
-     The first part matches an optional opening parenthesis,  and
-     if  that character is present, sets it as the first captured
-     substring. The second part matches one  or  more  characters
-     that  are  not  parentheses. The third part is a conditional
-     subpattern that tests whether the first set  of  parentheses
-     matched  or  not.  If  they did, that is, if subject started
-     with an opening parenthesis, the condition is true,  and  so
-     the  yes-pattern  is  executed  and a closing parenthesis is
-     required. Otherwise, since no-pattern is  not  present,  the
-     subpattern  matches  nothing.  In  other words, this pattern
-     matches a sequence of non-parentheses,  optionally  enclosed
-     in parentheses.
-
-     If the condition is not a sequence of digits, it must be  an
-     assertion.  This  may be a positive or negative lookahead or
-     lookbehind assertion. Consider this pattern, again  contain-
-     ing  non-significant  white space, and with the two alterna-
-     tives on the second line:
-
-       (?(?=[^a-z]*[a-z])
-       \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )
-
-     The condition is a positive lookahead assertion that matches
-     an optional sequence of non-letters followed by a letter. In
-     other words, it tests for  the  presence  of  at  least  one
-     letter  in the subject. If a letter is found, the subject is
-     matched against  the  first  alternative;  otherwise  it  is
-     matched  against the second. This pattern matches strings in
-     one of the two forms dd-aaa-dd or dd-dd-dd,  where  aaa  are
-     letters and dd are digits.
-
-
-
-COMMENTS
-     The sequence (?# marks the start of a comment which  contin-
-     ues  up  to the next closing parenthesis. Nested parentheses
-     are not permitted. The characters that  make  up  a  comment
-     play no part in the pattern matching at all.
-
-     If the PCRE_EXTENDED option is set, an unescaped # character
-     outside  a character class introduces a comment that contin-
-     ues up to the next newline character in the pattern.
-
-
-
-RECURSIVE PATTERNS
-     Consider the problem of matching a  string  in  parentheses,
-     allowing  for  unlimited nested parentheses. Without the use
-     of recursion, the best that can be done is to use a  pattern
-     that  matches  up  to some fixed depth of nesting. It is not
-     possible to handle an arbitrary nesting depth. Perl 5.6  has
-     provided   an  experimental  facility  that  allows  regular
-     expressions to recurse (amongst other things). It does  this
-     by  interpolating  Perl  code in the expression at run time,
-     and the code can refer to the expression itself. A Perl pat-
-     tern  to  solve  the parentheses problem can be created like
-     this:
-
-       $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;
-
-     The (?p{...}) item interpolates Perl code at run  time,  and
-     in  this  case refers recursively to the pattern in which it
-     appears. Obviously, PCRE cannot support the interpolation of
-     Perl  code.  Instead,  the special item (?R) is provided for
-     the specific case of recursion. This PCRE pattern solves the
-     parentheses  problem (assume the PCRE_EXTENDED option is set
-     so that white space is ignored):
-
-       \( ( (?>[^()]+) | (?R) )* \)
-
-     First it matches an opening parenthesis. Then it matches any
-     number  of substrings which can either be a sequence of non-
-     parentheses, or a recursive  match  of  the  pattern  itself
-     (i.e. a correctly parenthesized substring). Finally there is
-     a closing parenthesis.
-
-     This particular example pattern  contains  nested  unlimited
-     repeats, and so the use of a once-only subpattern for match-
-     ing strings of non-parentheses is  important  when  applying
-     the  pattern to strings that do not match. For example, when
-     it is applied to
-
-       (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
-
-     it yields "no match" quickly. However, if a  once-only  sub-
-     pattern  is  not  used,  the match runs for a very long time
-     indeed because there are so many different ways the + and  *
-     repeats  can carve up the subject, and all have to be tested
-     before failure can be reported.
-
-     The values set for any capturing subpatterns are those  from
-     the outermost level of the recursion at which the subpattern
-     value is set. If the pattern above is matched against
-
-       (ab(cd)ef)
-
-     the value for the capturing parentheses is  "ef",  which  is
-     the  last  value  taken  on  at the top level. If additional
-     parentheses are added, giving
-
-       \( ( ( (?>[^()]+) | (?R) )* ) \)
-          ^                        ^
-          ^                        ^ the string they  capture  is
-     "ab(cd)ef",  the  contents  of the top level parentheses. If
-     there are more than 15 capturing parentheses in  a  pattern,
-     PCRE  has  to  obtain  extra  memory  to store data during a
-     recursion, which it does by using  pcre_malloc,  freeing  it
-     via  pcre_free  afterwards. If no memory can be obtained, it
-     saves data for the first 15 capturing parentheses  only,  as
-     there is no way to give an out-of-memory error from within a
-     recursion.
-
-
-
-PERFORMANCE
-     Certain items that may appear in patterns are more efficient
-     than  others.  It is more efficient to use a character class
-     like [aeiou] than a set of alternatives such as (a|e|i|o|u).
-     In  general,  the  simplest  construction  that provides the
-     required behaviour is usually the  most  efficient.  Jeffrey
-     Friedl's  book contains a lot of discussion about optimizing
-     regular expressions for efficient performance.
-
-     When a pattern begins with .* and the PCRE_DOTALL option  is
-     set,  the  pattern  is implicitly anchored by PCRE, since it
-     can match only at the start of a subject string. However, if
-     PCRE_DOTALL  is not set, PCRE cannot make this optimization,
-     because the . metacharacter does not then match  a  newline,
-     and if the subject string contains newlines, the pattern may
-     match from the character immediately following one  of  them
-     instead of from the very start. For example, the pattern
-
-       (.*) second
-
-     matches the subject "first\nand second" (where \n stands for
-     a newline character) with the first captured substring being
-     "and". In order to do this, PCRE  has  to  retry  the  match
-     starting after every newline in the subject.
-
-     If you are using such a pattern with subject strings that do
-     not  contain  newlines,  the best performance is obtained by
-     setting PCRE_DOTALL, or starting the  pattern  with  ^.*  to
-     indicate  explicit anchoring. That saves PCRE from having to
-     scan along the subject looking for a newline to restart at.
-
-     Beware of patterns that contain nested  indefinite  repeats.
-     These  can  take a long time to run when applied to a string
-     that does not match. Consider the pattern fragment
-
-       (a+)*
-
-     This can match "aaaa" in 33 different ways, and this  number
-     increases  very  rapidly  as  the string gets longer. (The *
-     repeat can match 0, 1, 2, 3, or 4 times,  and  for  each  of
-     those  cases other than 0, the + repeats can match different
-     numbers of times.) When the remainder of the pattern is such
-     that  the entire match is going to fail, PCRE has in princi-
-     ple to try every possible variation, and this  can  take  an
-     extremely long time.
-
-     An optimization catches some of the more simple  cases  such
-     as
-
-       (a+)*b
-
-     where a literal character follows. Before embarking  on  the
-     standard matching procedure, PCRE checks that there is a "b"
-     later in the subject string, and if there is not,  it  fails
-     the  match  immediately. However, when there is no following
-     literal this optimization cannot be used. You  can  see  the
-     difference by comparing the behaviour of
-
-       (a+)*\d
-
-     with the pattern above. The former gives  a  failure  almost
-     instantly  when  applied  to a whole line of "a" characters,
-     whereas the latter takes an appreciable  time  with  strings
-     longer than about 20 characters.
-
-
-
-UTF-8 SUPPORT
-     Starting at release 3.3, PCRE has some support for character
-     strings encoded in the UTF-8 format. This is incomplete, and
-     is regarded as experimental. In order to use  it,  you  must
-     configure PCRE to include UTF-8 support in the code, and, in
-     addition, you must call pcre_compile()  with  the  PCRE_UTF8
-     option flag. When you do this, both the pattern and any sub-
-     ject strings that are matched  against  it  are  treated  as
-     UTF-8  strings instead of just strings of bytes, but only in
-     the cases that are mentioned below.
-
-     If you compile PCRE with UTF-8 support, but do not use it at
-     run  time,  the  library will be a bit bigger, but the addi-
-     tional run time overhead is limited to testing the PCRE_UTF8
-     flag in several places, so should not be very large.
-
-     PCRE assumes that the strings  it  is  given  contain  valid
-     UTF-8  codes. It does not diagnose invalid UTF-8 strings. If
-     you pass invalid UTF-8 strings  to  PCRE,  the  results  are
-     undefined.
-
-     Running with PCRE_UTF8 set causes these changes in  the  way
-     PCRE works:
-
-     1. In a pattern, the escape sequence \x{...}, where the con-
-     tents  of  the  braces is a string of hexadecimal digits, is
-     interpreted as a UTF-8 character whose code  number  is  the
-     given   hexadecimal  number,  for  example:  \x{1234}.  This
-     inserts from one to six  literal  bytes  into  the  pattern,
-     using the UTF-8 encoding. If a non-hexadecimal digit appears
-     between the braces, the item is not recognized.
-
-     2. The original hexadecimal escape sequence, \xhh, generates
-     a two-byte UTF-8 character if its value is greater than 127.
-
-     3. Repeat quantifiers are NOT correctly handled if they fol-
-     low  a  multibyte character. For example, \x{100}* and \xc3+
-     do not work. If you want to repeat such characters, you must
-     enclose  them  in  non-capturing  parentheses,  for  example
-     (?:\x{100}), at present.
-
-     4. The dot metacharacter matches one UTF-8 character instead
-     of a single byte.
-
-     5. Unlike literal UTF-8 characters,  the  dot  metacharacter
-     followed  by  a  repeat quantifier does operate correctly on
-     UTF-8 characters instead of single bytes.
-
-     4. Although the \x{...} escape is permitted in  a  character
-     class,  characters  whose values are greater than 255 cannot
-     be included in a class.
-
-     5. A class is matched against a UTF-8 character  instead  of
-     just  a  single byte, but it can match only characters whose
-     values are less than 256.  Characters  with  greater  values
-     always fail to match a class.
-
-     6. Repeated classes work correctly on multiple characters.
-
-     7. Classes containing just a single character whose value is
-     greater than 127 (but less than 256), for example, [\x80] or
-     [^\x{93}], do not work because these are optimized into sin-
-     gle  byte  matches.  In the first case, of course, the class
-     brackets are just redundant.
-
-     8. Lookbehind assertions move backwards in the subject by  a
-     fixed  number  of  characters  instead  of a fixed number of
-     bytes. Simple cases have been tested to work correctly,  but
-     there may be hidden gotchas herein.
-
-     9. The character types  such  as  \d  and  \w  do  not  work
-     correctly  with  UTF-8  characters.  They continue to test a
-     single byte.
-
-     10. Anything not explicitly mentioned here continues to work
-     in bytes rather than in characters.
-
-     The following UTF-8 features of  Perl  5.6  are  not  imple-
-     mented:
-     1. The escape sequence \C to match a single byte.
-
-     2. The use of Unicode tables and properties and escapes  \p,
-     \P, and \X.
-
-
-
-AUTHOR
-     Philip Hazel <ph10@xxxxxxxxx>
-     University Computing Service,
-     New Museums Site,
-     Cambridge CB2 3QG, England.
-     Phone: +44 1223 334714
-
-     Last updated: 28 August 2000,
-       the 250th anniversary of the death of J.S. Bach.
-     Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcregrep.1 b/external/privoxy/pcre/doc/pcregrep.1
deleted file mode 100644
index ec733fa..0000000
--- a/external/privoxy/pcre/doc/pcregrep.1
+++ /dev/null
@@ -1,76 +0,0 @@
-.TH PCREGREP 1
-.SH NAME
-pcregrep - a grep with Perl-compatible regular expressions.
-.SH SYNOPSIS
-.B pcregrep [-Vchilnsvx] pattern [file] ...
-
-
-.SH DESCRIPTION
-\fBpcregrep\fR searches files for character patterns, in the same way as other
-grep commands do, but it uses the PCRE regular expression library to support
-patterns that are compatible with the regular expressions of Perl 5. See
-\fBpcre(3)\fR for a full description of syntax and semantics.
-
-If no files are specified, \fBpcregrep\fR reads the standard input. By default,
-each line that matches the pattern is copied to the standard output, and if
-there is more than one file, the file name is printed before each line of
-output. However, there are options that can change how \fBpcregrep\fR behaves.
-
-Lines are limited to BUFSIZ characters. BUFSIZ is defined in \fB<stdio.h>\fR.
-The newline character is removed from the end of each line before it is matched
-against the pattern.
-
-
-.SH OPTIONS
-.TP 10
-\fB-V\fR
-Write the version number of the PCRE library being used to the standard error
-stream.
-.TP
-\fB-c\fR
-Do not print individual lines; instead just print a count of the number of
-lines that would otherwise have been printed. If several files are given, a
-count is printed for each of them.
-.TP
-\fB-h\fR
-Suppress printing of filenames when searching multiple files.
-.TP
-\fB-i\fR
-Ignore upper/lower case distinctions during comparisons.
-.TP
-\fB-l\fR
-Instead of printing lines from the files, just print the names of the files
-containing lines that would have been printed. Each file name is printed
-once, on a separate line.
-.TP
-\fB-n\fR
-Precede each line by its line number in the file.
-.TP
-\fB-s\fR
-Work silently, that is, display nothing except error messages.
-The exit status indicates whether any matches were found.
-.TP
-\fB-v\fR
-Invert the sense of the match, so that lines which do \fInot\fR match the
-pattern are now the ones that are found.
-.TP
-\fB-x\fR
-Force the pattern to be anchored (it must start matching at the beginning of
-the line) and in addition, require it to match the entire line. This is
-equivalent to having ^ and $ characters at the start and end of each
-alternative branch in the regular expression.
-
-
-.SH SEE ALSO
-\fBpcre(3)\fR, Perl 5 documentation
-
-
-.SH DIAGNOSTICS
-Exit status is 0 if any matches were found, 1 if no matches were found, and 2
-for syntax errors or inacessible files (even if matches were found).
-
-
-.SH AUTHOR
-Philip Hazel <ph10@xxxxxxxxx>
-.br
-Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcregrep.html b/external/privoxy/pcre/doc/pcregrep.html
deleted file mode 100644
index 19f733c..0000000
--- a/external/privoxy/pcre/doc/pcregrep.html
+++ /dev/null
@@ -1,105 +0,0 @@
-<HTML>
-<HEAD>
-<TITLE>pcregrep specification</TITLE>
-</HEAD>
-<body bgcolor="#FFFFFF" text="#00005A">
-<H1>pcregrep specification</H1>
-This HTML document has been generated automatically from the original man page.
-If there is any nonsense in it, please consult the man page in case the
-conversion went wrong.
-<UL>
-<LI><A NAME="TOC1" HREF="#SEC1">NAME</A>
-<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A>
-<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A>
-<LI><A NAME="TOC4" HREF="#SEC4">OPTIONS</A>
-<LI><A NAME="TOC5" HREF="#SEC5">SEE ALSO</A>
-<LI><A NAME="TOC6" HREF="#SEC6">DIAGNOSTICS</A>
-<LI><A NAME="TOC7" HREF="#SEC7">AUTHOR</A>
-</UL>
-<LI><A NAME="SEC1" HREF="#TOC1">NAME</A>
-<P>
-pcregrep - a grep with Perl-compatible regular expressions.
-</P>
-<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A>
-<P>
-<B>pcregrep [-Vchilnsvx] pattern [file] ...</B>
-</P>
-<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A>
-<P>
-<B>pcregrep</B> searches files for character patterns, in the same way as other
-grep commands do, but it uses the PCRE regular expression library to support
-patterns that are compatible with the regular expressions of Perl 5. See
-<B>pcre(3)</B> for a full description of syntax and semantics.
-</P>
-<P>
-If no files are specified, <B>pcregrep</B> reads the standard input. By default,
-each line that matches the pattern is copied to the standard output, and if
-there is more than one file, the file name is printed before each line of
-output. However, there are options that can change how <B>pcregrep</B> behaves.
-</P>
-<P>
-Lines are limited to BUFSIZ characters. BUFSIZ is defined in <B>&#60;stdio.h&#62;</B>.
-The newline character is removed from the end of each line before it is matched
-against the pattern.
-</P>
-<LI><A NAME="SEC4" HREF="#TOC1">OPTIONS</A>
-<P>
-<B>-V</B>
-Write the version number of the PCRE library being used to the standard error
-stream.
-</P>
-<P>
-<B>-c</B>
-Do not print individual lines; instead just print a count of the number of
-lines that would otherwise have been printed. If several files are given, a
-count is printed for each of them.
-</P>
-<P>
-<B>-h</B>
-Suppress printing of filenames when searching multiple files.
-</P>
-<P>
-<B>-i</B>
-Ignore upper/lower case distinctions during comparisons.
-</P>
-<P>
-<B>-l</B>
-Instead of printing lines from the files, just print the names of the files
-containing lines that would have been printed. Each file name is printed
-once, on a separate line.
-</P>
-<P>
-<B>-n</B>
-Precede each line by its line number in the file.
-</P>
-<P>
-<B>-s</B>
-Work silently, that is, display nothing except error messages.
-The exit status indicates whether any matches were found.
-</P>
-<P>
-<B>-v</B>
-Invert the sense of the match, so that lines which do <I>not</I> match the
-pattern are now the ones that are found.
-</P>
-<P>
-<B>-x</B>
-Force the pattern to be anchored (it must start matching at the beginning of
-the line) and in addition, require it to match the entire line. This is
-equivalent to having ^ and $ characters at the start and end of each
-alternative branch in the regular expression.
-</P>
-<LI><A NAME="SEC5" HREF="#TOC1">SEE ALSO</A>
-<P>
-<B>pcre(3)</B>, Perl 5 documentation
-</P>
-<LI><A NAME="SEC6" HREF="#TOC1">DIAGNOSTICS</A>
-<P>
-Exit status is 0 if any matches were found, 1 if no matches were found, and 2
-for syntax errors or inacessible files (even if matches were found).
-</P>
-<LI><A NAME="SEC7" HREF="#TOC1">AUTHOR</A>
-<P>
-Philip Hazel &#60;ph10@xxxxxxxxx&#62;
-<BR>
-Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcregrep.txt b/external/privoxy/pcre/doc/pcregrep.txt
deleted file mode 100644
index 871350c..0000000
--- a/external/privoxy/pcre/doc/pcregrep.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-NAME
-     pcregrep - a grep with Perl-compatible regular expressions.
-
-
-
-SYNOPSIS
-     pcregrep [-Vchilnsvx] pattern [file] ...
-
-
-
-DESCRIPTION
-     pcregrep searches files for character patterns, in the  same
-     way  as other grep commands do, but it uses the PCRE regular
-     expression library to support patterns that  are  compatible
-     with  the  regular  expressions of Perl 5. See pcre(3) for a
-     full description of syntax and semantics.
-
-     If no files  are  specified,  pcregrep  reads  the  standard
-     input.  By  default,  each  line that matches the pattern is
-     copied to the standard output, and if there is more than one
-     file,  the  file name is printed before each line of output.
-     However, there are options  that  can  change  how  pcregrep
-     behaves.
-
-     Lines are limited to BUFSIZ characters. BUFSIZ is defined in
-     <stdio.h>.  The newline character is removed from the end of
-     each line before it is matched against the pattern.
-
-
-
-OPTIONS
-     -V        Write the version number of the PCRE library being
-               used to the standard error stream.
-
-     -c        Do not print individual lines; instead just  print
-               a  count  of the number of lines that would other-
-               wise have  been  printed.  If  several  files  are
-               given, a count is printed for each of them.
-
-     -h        Suppress printing of filenames when searching mul-
-               tiple files.
-
-     -i        Ignore upper/lower case distinctions  during  com-
-               parisons.
-
-     -l        Instead of printing lines  from  the  files,  just
-               print the names of the files containing lines that
-               would have been printed. Each file name is printed
-               once, on a separate line.
-
-     -n        Precede each line by its line number in the file.
-
-     -s        Work silently, that  is,  display  nothing  except
-               error messages.  The exit status indicates whether
-               any matches were found.
-
-     -v        Invert the sense of the match, so that lines which
-               do not match the pattern are now the ones that are
-               found.
-
-     -x        Force the pattern to be anchored  (it  must  start
-               matching  at  the  beginning  of  the line) and in
-               addition, require it to  match  the  entire  line.
-               This is equivalent to having ^ and $ characters at
-               the start and end of each  alternative  branch  in
-               the regular expression.
-
-
-
-SEE ALSO
-     pcre(3), Perl 5 documentation
-
-
-
-
-
-DIAGNOSTICS
-     Exit status is 0 if any matches were found, 1 if no  matches
-     were  found,  and  2  for syntax errors or inacessible files
-     (even if matches were found).
-
-
-
-AUTHOR
-     Philip Hazel <ph10@xxxxxxxxx>
-     Copyright (c) 1997-2000 University of Cambridge.
-
diff --git a/external/privoxy/pcre/doc/pcreposix.3 b/external/privoxy/pcre/doc/pcreposix.3
deleted file mode 100644
index 4853a97..0000000
--- a/external/privoxy/pcre/doc/pcreposix.3
+++ /dev/null
@@ -1,149 +0,0 @@
-.TH PCRE 3
-.SH NAME
-pcreposix - POSIX API for Perl-compatible regular expressions.
-.SH SYNOPSIS
-.B #include <pcreposix.h>
-.PP
-.SM
-.br
-.B int regcomp(regex_t *\fIpreg\fR, const char *\fIpattern\fR,
-.ti +5n
-.B int \fIcflags\fR);
-.PP
-.br
-.B int regexec(regex_t *\fIpreg\fR, const char *\fIstring\fR,
-.ti +5n
-.B size_t \fInmatch\fR, regmatch_t \fIpmatch\fR[], int \fIeflags\fR);
-.PP
-.br
-.B size_t regerror(int \fIerrcode\fR, const regex_t *\fIpreg\fR,
-.ti +5n
-.B char *\fIerrbuf\fR, size_t \fIerrbuf_size\fR);
-.PP
-.br
-.B void regfree(regex_t *\fIpreg\fR);
-
-
-.SH DESCRIPTION
-This set of functions provides a POSIX-style API to the PCRE regular expression
-package. See the \fBpcre\fR documentation for a description of the native API,
-which contains additional functionality.
-
-The functions described here are just wrapper functions that ultimately call
-the native API. Their prototypes are defined in the \fBpcreposix.h\fR header
-file, and on Unix systems the library itself is called \fBpcreposix.a\fR, so
-can be accessed by adding \fB-lpcreposix\fR to the command for linking an
-application which uses them. Because the POSIX functions call the native ones,
-it is also necessary to add \fR-lpcre\fR.
-
-I have implemented only those option bits that can be reasonably mapped to PCRE
-native options. In addition, the options REG_EXTENDED and REG_NOSUB are defined
-with the value zero. They have no effect, but since programs that are written
-to the POSIX interface often use them, this makes it easier to slot in PCRE as
-a replacement library. Other POSIX options are not even defined.
-
-When PCRE is called via these functions, it is only the API that is POSIX-like
-in style. The syntax and semantics of the regular expressions themselves are
-still those of Perl, subject to the setting of various PCRE options, as
-described below.
-
-The header for these functions is supplied as \fBpcreposix.h\fR to avoid any
-potential clash with other POSIX libraries. It can, of course, be renamed or
-aliased as \fBregex.h\fR, which is the "correct" name. It provides two
-structure types, \fIregex_t\fR for compiled internal forms, and
-\fIregmatch_t\fR for returning captured substrings. It also defines some
-constants whose names start with "REG_"; these are used for setting options and
-identifying error codes.
-
-
-.SH COMPILING A PATTERN
-
-The function \fBregcomp()\fR is called to compile a pattern into an
-internal form. The pattern is a C string terminated by a binary zero, and
-is passed in the argument \fIpattern\fR. The \fIpreg\fR argument is a pointer
-to a regex_t structure which is used as a base for storing information about
-the compiled expression.
-
-The argument \fIcflags\fR is either zero, or contains one or more of the bits
-defined by the following macros:
-
-  REG_ICASE
-
-The PCRE_CASELESS option is set when the expression is passed for compilation
-to the native function.
-
-  REG_NEWLINE
-
-The PCRE_MULTILINE option is set when the expression is passed for compilation
-to the native function.
-
-In the absence of these flags, no options are passed to the native function.
-This means the the regex is compiled with PCRE default semantics. In
-particular, the way it handles newline characters in the subject string is the
-Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only
-\fIsome\fR of the effects specified for REG_NEWLINE. It does not affect the way
-newlines are matched by . (they aren't) or a negative class such as [^a] (they
-are).
-
-The yield of \fBregcomp()\fR is zero on success, and non-zero otherwise. The
-\fIpreg\fR structure is filled in on success, and one member of the structure
-is publicized: \fIre_nsub\fR contains the number of capturing subpatterns in
-the regular expression. Various error codes are defined in the header file.
-
-
-.SH MATCHING A PATTERN
-The function \fBregexec()\fR is called to match a pre-compiled pattern
-\fIpreg\fR against a given \fIstring\fR, which is terminated by a zero byte,
-subject to the options in \fIeflags\fR. These can be:
-
-  REG_NOTBOL
-
-The PCRE_NOTBOL option is set when calling the underlying PCRE matching
-function.
-
-  REG_NOTEOL
-
-The PCRE_NOTEOL option is set when calling the underlying PCRE matching
-function.
-
-The portion of the string that was matched, and also any captured substrings,
-are returned via the \fIpmatch\fR argument, which points to an array of
-\fInmatch\fR structures of type \fIregmatch_t\fR, containing the members
-\fIrm_so\fR and \fIrm_eo\fR. These contain the offset to the first character of
-each substring and the offset to the first character after the end of each
-substring, respectively. The 0th element of the vector relates to the entire
-portion of \fIstring\fR that was matched; subsequent elements relate to the
-capturing subpatterns of the regular expression. Unused entries in the array
-have both structure members set to -1.
-
-A successful match yields a zero return; various error codes are defined in the
-header file, of which REG_NOMATCH is the "expected" failure code.
-
-
-.SH ERROR MESSAGES
-The \fBregerror()\fR function maps a non-zero errorcode from either
-\fBregcomp\fR or \fBregexec\fR to a printable message. If \fIpreg\fR is not
-NULL, the error should have arisen from the use of that structure. A message
-terminated by a binary zero is placed in \fIerrbuf\fR. The length of the
-message, including the zero, is limited to \fIerrbuf_size\fR. The yield of the
-function is the size of buffer needed to hold the whole message.
-
-
-.SH STORAGE
-Compiling a regular expression causes memory to be allocated and associated
-with the \fIpreg\fR structure. The function \fBregfree()\fR frees all such
-memory, after which \fIpreg\fR may no longer be used as a compiled expression.
-
-
-.SH AUTHOR
-Philip Hazel <ph10@xxxxxxxxx>
-.br
-University Computing Service,
-.br
-New Museums Site,
-.br
-Cambridge CB2 3QG, England.
-.br
-Phone: +44 1223 334714
-
-Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcreposix.html b/external/privoxy/pcre/doc/pcreposix.html
deleted file mode 100644
index 79ff544..0000000
--- a/external/privoxy/pcre/doc/pcreposix.html
+++ /dev/null
@@ -1,191 +0,0 @@
-<HTML>
-<HEAD>
-<TITLE>pcreposix specification</TITLE>
-</HEAD>
-<body bgcolor="#FFFFFF" text="#00005A">
-<H1>pcreposix specification</H1>
-This HTML document has been generated automatically from the original man page.
-If there is any nonsense in it, please consult the man page in case the
-conversion went wrong.
-<UL>
-<LI><A NAME="TOC1" HREF="#SEC1">NAME</A>
-<LI><A NAME="TOC2" HREF="#SEC2">SYNOPSIS</A>
-<LI><A NAME="TOC3" HREF="#SEC3">DESCRIPTION</A>
-<LI><A NAME="TOC4" HREF="#SEC4">COMPILING A PATTERN</A>
-<LI><A NAME="TOC5" HREF="#SEC5">MATCHING A PATTERN</A>
-<LI><A NAME="TOC6" HREF="#SEC6">ERROR MESSAGES</A>
-<LI><A NAME="TOC7" HREF="#SEC7">STORAGE</A>
-<LI><A NAME="TOC8" HREF="#SEC8">AUTHOR</A>
-</UL>
-<LI><A NAME="SEC1" HREF="#TOC1">NAME</A>
-<P>
-pcreposix - POSIX API for Perl-compatible regular expressions.
-</P>
-<LI><A NAME="SEC2" HREF="#TOC1">SYNOPSIS</A>
-<P>
-<B>#include &#60;pcreposix.h&#62;</B>
-</P>
-<P>
-<B>int regcomp(regex_t *<I>preg</I>, const char *<I>pattern</I>,</B>
-<B>int <I>cflags</I>);</B>
-</P>
-<P>
-<B>int regexec(regex_t *<I>preg</I>, const char *<I>string</I>,</B>
-<B>size_t <I>nmatch</I>, regmatch_t <I>pmatch</I>[], int <I>eflags</I>);</B>
-</P>
-<P>
-<B>size_t regerror(int <I>errcode</I>, const regex_t *<I>preg</I>,</B>
-<B>char *<I>errbuf</I>, size_t <I>errbuf_size</I>);</B>
-</P>
-<P>
-<B>void regfree(regex_t *<I>preg</I>);</B>
-</P>
-<LI><A NAME="SEC3" HREF="#TOC1">DESCRIPTION</A>
-<P>
-This set of functions provides a POSIX-style API to the PCRE regular expression
-package. See the <B>pcre</B> documentation for a description of the native API,
-which contains additional functionality.
-</P>
-<P>
-The functions described here are just wrapper functions that ultimately call
-the native API. Their prototypes are defined in the <B>pcreposix.h</B> header
-file, and on Unix systems the library itself is called <B>pcreposix.a</B>, so
-can be accessed by adding <B>-lpcreposix</B> to the command for linking an
-application which uses them. Because the POSIX functions call the native ones,
-it is also necessary to add \fR-lpcre\fR.
-</P>
-<P>
-I have implemented only those option bits that can be reasonably mapped to PCRE
-native options. In addition, the options REG_EXTENDED and REG_NOSUB are defined
-with the value zero. They have no effect, but since programs that are written
-to the POSIX interface often use them, this makes it easier to slot in PCRE as
-a replacement library. Other POSIX options are not even defined.
-</P>
-<P>
-When PCRE is called via these functions, it is only the API that is POSIX-like
-in style. The syntax and semantics of the regular expressions themselves are
-still those of Perl, subject to the setting of various PCRE options, as
-described below.
-</P>
-<P>
-The header for these functions is supplied as <B>pcreposix.h</B> to avoid any
-potential clash with other POSIX libraries. It can, of course, be renamed or
-aliased as <B>regex.h</B>, which is the "correct" name. It provides two
-structure types, <I>regex_t</I> for compiled internal forms, and
-<I>regmatch_t</I> for returning captured substrings. It also defines some
-constants whose names start with "REG_"; these are used for setting options and
-identifying error codes.
-</P>
-<LI><A NAME="SEC4" HREF="#TOC1">COMPILING A PATTERN</A>
-<P>
-The function <B>regcomp()</B> is called to compile a pattern into an
-internal form. The pattern is a C string terminated by a binary zero, and
-is passed in the argument <I>pattern</I>. The <I>preg</I> argument is a pointer
-to a regex_t structure which is used as a base for storing information about
-the compiled expression.
-</P>
-<P>
-The argument <I>cflags</I> is either zero, or contains one or more of the bits
-defined by the following macros:
-</P>
-<P>
-<PRE>
-  REG_ICASE
-</PRE>
-</P>
-<P>
-The PCRE_CASELESS option is set when the expression is passed for compilation
-to the native function.
-</P>
-<P>
-<PRE>
-  REG_NEWLINE
-</PRE>
-</P>
-<P>
-The PCRE_MULTILINE option is set when the expression is passed for compilation
-to the native function.
-</P>
-<P>
-In the absence of these flags, no options are passed to the native function.
-This means the the regex is compiled with PCRE default semantics. In
-particular, the way it handles newline characters in the subject string is the
-Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only
-<I>some</I> of the effects specified for REG_NEWLINE. It does not affect the way
-newlines are matched by . (they aren't) or a negative class such as [^a] (they
-are).
-</P>
-<P>
-The yield of <B>regcomp()</B> is zero on success, and non-zero otherwise. The
-<I>preg</I> structure is filled in on success, and one member of the structure
-is publicized: <I>re_nsub</I> contains the number of capturing subpatterns in
-the regular expression. Various error codes are defined in the header file.
-</P>
-<LI><A NAME="SEC5" HREF="#TOC1">MATCHING A PATTERN</A>
-<P>
-The function <B>regexec()</B> is called to match a pre-compiled pattern
-<I>preg</I> against a given <I>string</I>, which is terminated by a zero byte,
-subject to the options in <I>eflags</I>. These can be:
-</P>
-<P>
-<PRE>
-  REG_NOTBOL
-</PRE>
-</P>
-<P>
-The PCRE_NOTBOL option is set when calling the underlying PCRE matching
-function.
-</P>
-<P>
-<PRE>
-  REG_NOTEOL
-</PRE>
-</P>
-<P>
-The PCRE_NOTEOL option is set when calling the underlying PCRE matching
-function.
-</P>
-<P>
-The portion of the string that was matched, and also any captured substrings,
-are returned via the <I>pmatch</I> argument, which points to an array of
-<I>nmatch</I> structures of type <I>regmatch_t</I>, containing the members
-<I>rm_so</I> and <I>rm_eo</I>. These contain the offset to the first character of
-each substring and the offset to the first character after the end of each
-substring, respectively. The 0th element of the vector relates to the entire
-portion of <I>string</I> that was matched; subsequent elements relate to the
-capturing subpatterns of the regular expression. Unused entries in the array
-have both structure members set to -1.
-</P>
-<P>
-A successful match yields a zero return; various error codes are defined in the
-header file, of which REG_NOMATCH is the "expected" failure code.
-</P>
-<LI><A NAME="SEC6" HREF="#TOC1">ERROR MESSAGES</A>
-<P>
-The <B>regerror()</B> function maps a non-zero errorcode from either
-<B>regcomp</B> or <B>regexec</B> to a printable message. If <I>preg</I> is not
-NULL, the error should have arisen from the use of that structure. A message
-terminated by a binary zero is placed in <I>errbuf</I>. The length of the
-message, including the zero, is limited to <I>errbuf_size</I>. The yield of the
-function is the size of buffer needed to hold the whole message.
-</P>
-<LI><A NAME="SEC7" HREF="#TOC1">STORAGE</A>
-<P>
-Compiling a regular expression causes memory to be allocated and associated
-with the <I>preg</I> structure. The function <B>regfree()</B> frees all such
-memory, after which <I>preg</I> may no longer be used as a compiled expression.
-</P>
-<LI><A NAME="SEC8" HREF="#TOC1">AUTHOR</A>
-<P>
-Philip Hazel &#60;ph10@xxxxxxxxx&#62;
-<BR>
-University Computing Service,
-<BR>
-New Museums Site,
-<BR>
-Cambridge CB2 3QG, England.
-<BR>
-Phone: +44 1223 334714
-</P>
-<P>
-Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcreposix.txt b/external/privoxy/pcre/doc/pcreposix.txt
deleted file mode 100644
index 2d76f7c..0000000
--- a/external/privoxy/pcre/doc/pcreposix.txt
+++ /dev/null
@@ -1,159 +0,0 @@
-NAME
-     pcreposix - POSIX API for  Perl-compatible  regular  expres-
-     sions.
-
-
-
-SYNOPSIS
-     #include <pcreposix.h>
-
-     int regcomp(regex_t *preg, const char *pattern,
-          int cflags);
-
-     int regexec(regex_t *preg, const char *string,
-          size_t nmatch, regmatch_t pmatch[], int eflags);
-
-     size_t regerror(int errcode, const regex_t *preg,
-          char *errbuf, size_t errbuf_size);
-
-     void regfree(regex_t *preg);
-
-
-
-DESCRIPTION
-     This set of functions provides a POSIX-style API to the PCRE
-     regular expression package. See the pcre documentation for a
-     description of the native  API,  which  contains  additional
-     functionality.
-
-     The functions described here are just wrapper functions that
-     ultimately call the native API. Their prototypes are defined
-     in the pcreposix.h header file,  and  on  Unix  systems  the
-     library  itself is called pcreposix.a, so can be accessed by
-     adding -lpcreposix to the command for linking an application
-     which uses them. Because the POSIX functions call the native
-     ones, it is also necessary to add -lpcre.
-
-     I have implemented only those option bits that can  be  rea-
-     sonably  mapped  to  PCRE  native  options. In addition, the
-     options REG_EXTENDED and  REG_NOSUB  are  defined  with  the
-     value zero. They have no effect, but since programs that are
-     written to the POSIX interface often use them, this makes it
-     easier to slot in PCRE as a replacement library. Other POSIX
-     options are not even defined.
-
-     When PCRE is called via these functions, it is only the  API
-     that is POSIX-like in style. The syntax and semantics of the
-     regular expressions themselves are still those of Perl, sub-
-     ject  to  the  setting of various PCRE options, as described
-     below.
-
-     The header for these functions is supplied as pcreposix.h to
-     avoid  any  potential  clash  with other POSIX libraries. It
-     can, of course, be renamed or aliased as regex.h,  which  is
-     the "correct" name. It provides two structure types, regex_t
-     for compiled internal forms, and  regmatch_t  for  returning
-     captured  substrings.  It  also defines some constants whose
-     names start with "REG_"; these are used for setting  options
-     and identifying error codes.
-
-
-
-COMPILING A PATTERN
-     The function regcomp() is called to compile a  pattern  into
-     an  internal form. The pattern is a C string terminated by a
-     binary zero, and is passed in the argument pattern. The preg
-     argument  is  a pointer to a regex_t structure which is used
-     as a base for storing information about the compiled expres-
-     sion.
-
-     The argument cflags is either zero, or contains one or  more
-     of the bits defined by the following macros:
-
-       REG_ICASE
-
-     The PCRE_CASELESS option  is  set  when  the  expression  is
-     passed for compilation to the native function.
-
-       REG_NEWLINE
-
-     The PCRE_MULTILINE option is  set  when  the  expression  is
-     passed for compilation to the native function.
-
-     In the absence of these flags, no options are passed to  the
-     native  function.  This means the the regex is compiled with
-     PCRE default semantics. In particular, the  way  it  handles
-     newline  characters  in  the subject string is the Perl way,
-     not the POSIX way. Note that setting PCRE_MULTILINE has only
-     some  of  the effects specified for REG_NEWLINE. It does not
-     affect the way newlines are matched by . (they aren't) or  a
-     negative class such as [^a] (they are).
-
-     The yield of regcomp() is zero on success, and non-zero oth-
-     erwise.  The preg structure is filled in on success, and one
-     member of the structure is publicized: re_nsub contains  the
-     number  of  capturing subpatterns in the regular expression.
-     Various error codes are defined in the header file.
-
-
-
-MATCHING A PATTERN
-     The function regexec() is called  to  match  a  pre-compiled
-     pattern  preg against a given string, which is terminated by
-     a zero byte, subject to the options in eflags. These can be:
-
-       REG_NOTBOL
-
-     The PCRE_NOTBOL option is set when  calling  the  underlying
-     PCRE matching function.
-
-       REG_NOTEOL
-
-     The PCRE_NOTEOL option is set when  calling  the  underlying
-     PCRE matching function.
-
-     The portion of the string that was  matched,  and  also  any
-     captured  substrings,  are returned via the pmatch argument,
-     which points to  an  array  of  nmatch  structures  of  type
-     regmatch_t,  containing  the  members rm_so and rm_eo. These
-     contain the offset to the first character of each  substring
-     and  the offset to the first character after the end of each
-     substring, respectively.  The  0th  element  of  the  vector
-     relates  to  the  entire portion of string that was matched;
-     subsequent elements relate to the capturing  subpatterns  of
-     the  regular  expression.  Unused  entries in the array have
-     both structure members set to -1.
-
-     A successful match yields a zero return; various error codes
-     are  defined in the header file, of which REG_NOMATCH is the
-     "expected" failure code.
-
-
-
-ERROR MESSAGES
-     The regerror()  function  maps  a  non-zero  errorcode  from
-     either regcomp or regexec to a printable message. If preg is
-     not NULL, the error should have arisen from the use of  that
-     structure.  A  message terminated by a binary zero is placed
-     in errbuf. The length of the message, including the zero, is
-     limited  to  errbuf_size.  The  yield of the function is the
-     size of buffer needed to hold the whole message.
-
-
-
-STORAGE
-     Compiling a regular expression causes memory to be allocated
-     and  associated  with  the preg structure. The function reg-
-     free() frees all such memory, after which preg may no longer
-     be used as a compiled expression.
-
-
-
-AUTHOR
-     Philip Hazel <ph10@xxxxxxxxx>
-     University Computing Service,
-     New Museums Site,
-     Cambridge CB2 3QG, England.
-     Phone: +44 1223 334714
-
-     Copyright (c) 1997-2000 University of Cambridge.
diff --git a/external/privoxy/pcre/doc/pcretest.txt b/external/privoxy/pcre/doc/pcretest.txt
deleted file mode 100644
index 722e6b8..0000000
--- a/external/privoxy/pcre/doc/pcretest.txt
+++ /dev/null
@@ -1,246 +0,0 @@
-The pcretest program
---------------------
-
-This program is intended for testing PCRE, but it can also be used for
-experimenting with regular expressions.
-
-If it is given two filename arguments, it reads from the first and writes to
-the second. If it is given only one filename argument, it reads from that file
-and writes to stdout. Otherwise, it reads from stdin and writes to stdout, and
-prompts for each line of input, using "re>" to prompt for regular expressions,
-and "data>" to prompt for data lines.
-
-The program handles any number of sets of input on a single input file. Each
-set starts with a regular expression, and continues with any number of data
-lines to be matched against the pattern. An empty line signals the end of the
-data lines, at which point a new regular expression is read. The regular
-expressions are given enclosed in any non-alphameric delimiters other than
-backslash, for example
-
-  /(a|bc)x+yz/
-
-White space before the initial delimiter is ignored. A regular expression may
-be continued over several input lines, in which case the newline characters are
-included within it. See the test input files in the testdata directory for many
-examples. It is possible to include the delimiter within the pattern by
-escaping it, for example
-
-  /abc\/def/
-
-If you do so, the escape and the delimiter form part of the pattern, but since
-delimiters are always non-alphameric, this does not affect its interpretation.
-If the terminating delimiter is immediately followed by a backslash, for
-example,
-
-  /abc/\
-
-then a backslash is added to the end of the pattern. This is done to provide a
-way of testing the error condition that arises if a pattern finishes with a
-backslash, because
-
-  /abc\/
-
-is interpreted as the first line of a pattern that starts with "abc/", causing
-pcretest to read the next line as a continuation of the regular expression.
-
-
-PATTERN MODIFIERS
------------------
-
-The pattern may be followed by i, m, s, or x to set the PCRE_CASELESS,
-PCRE_MULTILINE, PCRE_DOTALL, or PCRE_EXTENDED options, respectively. For
-example:
-
-  /caseless/i
-
-These modifier letters have the same effect as they do in Perl. There are
-others which set PCRE options that do not correspond to anything in Perl: /A,
-/E, and /X set PCRE_ANCHORED, PCRE_DOLLAR_ENDONLY, and PCRE_EXTRA respectively.
-
-Searching for all possible matches within each subject string can be requested
-by the /g or /G modifier. After finding a match, PCRE is called again to search
-the remainder of the subject string. The difference between /g and /G is that
-the former uses the startoffset argument to pcre_exec() to start searching at
-a new point within the entire string (which is in effect what Perl does),
-whereas the latter passes over a shortened substring. This makes a difference
-to the matching process if the pattern begins with a lookbehind assertion
-(including \b or \B).
-
-If any call to pcre_exec() in a /g or /G sequence matches an empty string, the
-next call is done with the PCRE_NOTEMPTY and PCRE_ANCHORED flags set in order
-to search for another, non-empty, match at the same point. If this second match
-fails, the start offset is advanced by one, and the normal match is retried.
-This imitates the way Perl handles such cases when using the /g modifier or the
-split() function.
-
-There are a number of other modifiers for controlling the way pcretest
-operates.
-
-The /+ modifier requests that as well as outputting the substring that matched
-the entire pattern, pcretest should in addition output the remainder of the
-subject string. This is useful for tests where the subject contains multiple
-copies of the same substring.
-
-The /L modifier must be followed directly by the name of a locale, for example,
-
-  /pattern/Lfr
-
-For this reason, it must be the last modifier letter. The given locale is set,
-pcre_maketables() is called to build a set of character tables for the locale,
-and this is then passed to pcre_compile() when compiling the regular
-expression. Without an /L modifier, NULL is passed as the tables pointer; that
-is, /L applies only to the expression on which it appears.
-
-The /I modifier requests that pcretest output information about the compiled
-expression (whether it is anchored, has a fixed first character, and so on). It
-does this by calling pcre_fullinfo() after compiling an expression, and
-outputting the information it gets back. If the pattern is studied, the results
-of that are also output.
-
-The /D modifier is a PCRE debugging feature, which also assumes /I. It causes
-the internal form of compiled regular expressions to be output after
-compilation.
-
-The /S modifier causes pcre_study() to be called after the expression has been
-compiled, and the results used when the expression is matched.
-
-The /M modifier causes the size of memory block used to hold the compiled
-pattern to be output.
-
-The /P modifier causes pcretest to call PCRE via the POSIX wrapper API rather
-than its native API. When this is done, all other modifiers except /i, /m, and
-/+ are ignored. REG_ICASE is set if /i is present, and REG_NEWLINE is set if /m
-is present. The wrapper functions force PCRE_DOLLAR_ENDONLY always, and
-PCRE_DOTALL unless REG_NEWLINE is set.
-
-The /8 modifier causes pcretest to call PCRE with the PCRE_UTF8 option set.
-This turns on the (currently incomplete) support for UTF-8 character handling
-in PCRE, provided that it was compiled with this support enabled. This modifier
-also causes any non-printing characters in output strings to be printed using
-the \x{hh...} notation if they are valid UTF-8 sequences.
-
-
-DATA LINES
-----------
-
-Before each data line is passed to pcre_exec(), leading and trailing whitespace
-is removed, and it is then scanned for \ escapes. The following are recognized:
-
-  \a         alarm (= BEL)
-  \b         backspace
-  \e         escape
-  \f         formfeed
-  \n         newline
-  \r         carriage return
-  \t         tab
-  \v         vertical tab
-  \nnn       octal character (up to 3 octal digits)
-  \xhh       hexadecimal character (up to 2 hex digits)
-  \x{hh...}  hexadecimal UTF-8 character
-
-  \A         pass the PCRE_ANCHORED option to pcre_exec()
-  \B         pass the PCRE_NOTBOL option to pcre_exec()
-  \Cdd       call pcre_copy_substring() for substring dd after a successful
-               match (any decimal number less than 32)
-  \Gdd       call pcre_get_substring() for substring dd after a successful
-               match (any decimal number less than 32)
-  \L         call pcre_get_substringlist() after a successful match
-  \N         pass the PCRE_NOTEMPTY option to pcre_exec()
-  \Odd       set the size of the output vector passed to pcre_exec() to dd
-               (any number of decimal digits)
-  \Z         pass the PCRE_NOTEOL option to pcre_exec()
-
-A backslash followed by anything else just escapes the anything else. If the
-very last character is a backslash, it is ignored. This gives a way of passing
-an empty line as data, since a real empty line terminates the data input.
-
-If /P was present on the regex, causing the POSIX wrapper API to be used, only
-\B, and \Z have any effect, causing REG_NOTBOL and REG_NOTEOL to be passed to
-regexec() respectively.
-
-The use of \x{hh...} to represent UTF-8 characters is not dependent on the use
-of the /8 modifier on the pattern. It is recognized always. There may be any
-number of hexadecimal digits inside the braces. The result is from one to six
-bytes, encoded according to the UTF-8 rules.
-
-
-OUTPUT FROM PCRETEST
---------------------
-
-When a match succeeds, pcretest outputs the list of captured substrings that
-pcre_exec() returns, starting with number 0 for the string that matched the
-whole pattern. Here is an example of an interactive pcretest run.
-
-  $ pcretest
-  PCRE version 2.06 08-Jun-1999
-
-    re> /^abc(\d+)/
-  data> abc123
-   0: abc123
-   1: 123
-  data> xyz
-  No match
-
-If the strings contain any non-printing characters, they are output as \0x
-escapes, or as \x{...} escapes if the /8 modifier was present on the pattern.
-If the pattern has the /+ modifier, then the output for substring 0 is followed
-by the the rest of the subject string, identified by "0+" like this:
-
-    re> /cat/+
-  data> cataract
-   0: cat
-   0+ aract
-
-If the pattern has the /g or /G modifier, the results of successive matching
-attempts are output in sequence, like this:
-
-    re> /\Bi(\w\w)/g
-  data> Mississippi
-   0: iss
-   1: ss
-   0: iss
-   1: ss
-   0: ipp
-   1: pp
-
-"No match" is output only if the first match attempt fails.
-
-If any of \C, \G, or \L are present in a data line that is successfully
-matched, the substrings extracted by the convenience functions are output with
-C, G, or L after the string number instead of a colon. This is in addition to
-the normal full list. The string length (that is, the return from the
-extraction function) is given in parentheses after each string for \C and \G.
-
-Note that while patterns can be continued over several lines (a plain ">"
-prompt is used for continuations), data lines may not. However newlines can be
-included in data by means of the \n escape.
-
-
-COMMAND LINE OPTIONS
---------------------
-
-If the -p option is given to pcretest, it is equivalent to adding /P to each
-regular expression: the POSIX wrapper API is used to call PCRE. None of the
-following flags has any effect in this case.
-
-If the option -d is given to pcretest, it is equivalent to adding /D to each
-regular expression: the internal form is output after compilation.
-
-If the option -i is given to pcretest, it is equivalent to adding /I to each
-regular expression: information about the compiled pattern is given after
-compilation.
-
-If the option -m is given to pcretest, it outputs the size of each compiled
-pattern after it has been compiled. It is equivalent to adding /M to each
-regular expression. For compatibility with earlier versions of pcretest, -s is
-a synonym for -m.
-
-If the -t option is given, each compile, study, and match is run 20000 times
-while being timed, and the resulting time per compile or match is output in
-milliseconds. Do not set -t with -m, because you will then get the size output
-20000 times and the timing will be distorted. If you want to change the number
-of repetitions used for timing, edit the definition of LOOPREPEAT at the top of
-pcretest.c
-
-Philip Hazel <ph10@xxxxxxxxx>
-August 2000
diff --git a/external/privoxy/pcre/doc/perltest.txt b/external/privoxy/pcre/doc/perltest.txt
deleted file mode 100644
index 33155c1..0000000
--- a/external/privoxy/pcre/doc/perltest.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-The perltest program
---------------------
-
-The perltest program tests Perl's regular expressions; it has the same
-specification as pcretest, and so can be given identical input, except that
-input patterns can be followed only by Perl's lower case modifiers and /+ (as
-used by pcretest), which is recognized and handled by the program.
-
-The data lines are processed as Perl double-quoted strings, so if they contain
-" \ $ or @ characters, these have to be escaped. For this reason, all such
-characters in testinput1 and testinput3 are escaped so that they can be used
-for perltest as well as for pcretest, and the special upper case modifiers such
-as /A that pcretest recognizes are not used in these files. The output should
-be identical, apart from the initial identifying banner.
-
-For testing UTF-8 features, an alternative form of perltest, called perltest8,
-is supplied. This requires Perl 5.6 or higher. It recognizes the special
-modifier /8 that pcretest uses to invoke UTF-8 functionality. The testinput5
-file can be fed to perltest8.
-
-The testinput2 and testinput4 files are not suitable for feeding to perltest,
-since they do make use of the special upper case modifiers and escapes that
-pcretest uses to test some features of PCRE. The first of these files also
-contains malformed regular expressions, in order to check that PCRE diagnoses
-them correctly. Similarly, testinput6 tests UTF-8 features that do not relate
-to Perl.
-
-Philip Hazel <ph10@xxxxxxxxx>
-August 2000
diff --git a/external/privoxy/pcre/doc/readme b/external/privoxy/pcre/doc/readme
deleted file mode 100644
index d124ee0..0000000
--- a/external/privoxy/pcre/doc/readme
+++ /dev/null
@@ -1,270 +0,0 @@
-README file for PCRE (Perl-compatible regular expression library)
------------------------------------------------------------------
-
-The latest release of PCRE is always available from
-
-  ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
-
-Please read the NEWS file if you are upgrading from a previous release.
-
-PCRE has its own native API, but a set of "wrapper" functions that are based on
-the POSIX API are also supplied in the library libpcreposix. Note that this
-just provides a POSIX calling interface to PCRE: the regular expressions
-themselves still follow Perl syntax and semantics. The header file
-for the POSIX-style functions is called pcreposix.h. The official POSIX name is
-regex.h, but I didn't want to risk possible problems with existing files of
-that name by distributing it that way. To use it with an existing program that
-uses the POSIX API, it will have to be renamed or pointed at by a link.
-
-
-Building PCRE on a Unix system
-------------------------------
-
-To build PCRE on a Unix system, run the "configure" command in the PCRE
-distribution directory. This is a standard GNU "autoconf" configuration script,
-for which generic instructions are supplied in INSTALL. On many systems just
-running "./configure" is sufficient, but the usual methods of changing standard
-defaults are available. For example,
-
-CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local
-
-specifies that the C compiler should be run with the flags '-O2 -Wall' instead
-of the default, and that "make install" should install PCRE under /opt/local
-instead of the default /usr/local.
-
-If you want to make use of the experimential, incomplete support for UTF-8
-character strings in PCRE, you must add --enable-utf8 to the "configure"
-command. Without it, the code for handling UTF-8 is not included in the
-library. (Even when included, it still has to be enabled by an option at run
-time.)
-
-The "configure" script builds four files:
-
-. Makefile is built by copying Makefile.in and making substitutions.
-. config.h is built by copying config.in and making substitutions.
-. pcre-config is built by copying pcre-config.in and making substitutions.
-. RunTest is a script for running tests
-
-Once "configure" has run, you can run "make". It builds two libraries called
-libpcre and libpcreposix, a test program called pcretest, and the pcregrep
-command. You can use "make install" to copy these, and the public header file
-pcre.h, to appropriate live directories on your system, in the normal way.
-
-Running "make install" also installs the command pcre-config, which can be used
-to recall information about the PCRE configuration and installation. For
-example,
-
-  pcre-config --version
-
-prints the version number, and
-
- pcre-config --libs
-
-outputs information about where the library is installed. This command can be
-included in makefiles for programs that use PCRE, saving the programmer from
-having to remember too many details.
-
-
-Shared libraries on Unix systems
---------------------------------
-
-The default distribution builds PCRE as two shared libraries. This support is
-new and experimental and may not work on all systems. It relies on the
-"libtool" scripts - these are distributed with PCRE. It should build a
-"libtool" script and use this to compile and link shared libraries, which are
-placed in a subdirectory called .libs. The programs pcretest and pcregrep are
-built to use these uninstalled libraries by means of wrapper scripts. When you
-use "make install" to install shared libraries, pcregrep and pcretest are
-automatically re-built to use the newly installed libraries. However, only
-pcregrep is installed, as pcretest is really just a test program.
-
-To build PCRE using static libraries you must use --disable-shared when
-configuring it. For example
-
-./configure --prefix=/usr/gnu --disable-shared
-
-Then run "make" in the usual way.
-
-
-Building on non-Unix systems
-----------------------------
-
-For a non-Unix system, read the comments in the file NON-UNIX-USE. PCRE has
-been compiled on Windows systems and on Macintoshes, but I don't know the
-details because I don't use those systems. It should be straightforward to
-build PCRE on any system that has a Standard C compiler, because it uses only
-Standard C functions.
-
-
-Testing PCRE
-------------
-
-To test PCRE on a Unix system, run the RunTest script in the pcre directory.
-(This can also be run by "make runtest", "make check", or "make test".) For
-other systems, see the instruction in NON-UNIX-USE.
-
-The script runs the pcretest test program (which is documented in
-doc/pcretest.txt) on each of the testinput files (in the testdata directory) in
-turn, and compares the output with the contents of the corresponding testoutput
-file. A file called testtry is used to hold the output from pcretest. To run
-pcretest on just one of the test files, give its number as an argument to
-RunTest, for example:
-
-  RunTest 3
-
-The first and third test files can also be fed directly into the perltest
-script to check that Perl gives the same results. The third file requires the
-additional features of release 5.005, which is why it is kept separate from the
-main test input, which needs only Perl 5.004. In the long run, when 5.005 (or
-higher) is widespread, these two test files may get amalgamated.
-
-The second set of tests check pcre_fullinfo(), pcre_info(), pcre_study(),
-pcre_copy_substring(), pcre_get_substring(), pcre_get_substring_list(), error
-detection, and run-time flags that are specific to PCRE, as well as the POSIX
-wrapper API. It also uses the debugging flag to check some of the internals of
-pcre_compile().
-
-If you build PCRE with a locale setting that is not the standard C locale, the
-character tables may be different (see next paragraph). In some cases, this may
-cause failures in the second set of tests. For example, in a locale where the
-isprint() function yields TRUE for characters in the range 128-255, the use of
-[:isascii:] inside a character class defines a different set of characters, and
-this shows up in this test as a difference in the compiled code, which is being
-listed for checking. Where the comparison test output contains [\x00-\x7f] the
-test will contain [\x00-\xff], and similarly in some other cases. This is not a
-bug in PCRE.
-
-The fourth set of tests checks pcre_maketables(), the facility for building a
-set of character tables for a specific locale and using them instead of the
-default tables. The tests make use of the "fr" (French) locale. Before running
-the test, the script checks for the presence of this locale by running the
-"locale" command. If that command fails, or if it doesn't include "fr" in the
-list of available locales, the fourth test cannot be run, and a comment is
-output to say why. If running this test produces instances of the error
-
-  ** Failed to set locale "fr"
-
-in the comparison output, it means that locale is not available on your system,
-despite being listed by "locale". This does not mean that PCRE is broken.
-
-The fifth test checks the experimental, incomplete UTF-8 support. It is not run
-automatically unless PCRE is built with UTF-8 support. This file can be fed
-directly to the perltest8 script, which requires Perl 5.6 or higher. The sixth
-file tests internal UTF-8 features of PCRE that are not relevant to Perl.
-
-
-Character tables
-----------------
-
-PCRE uses four tables for manipulating and identifying characters. The final
-argument of the pcre_compile() function is a pointer to a block of memory
-containing the concatenated tables. A call to pcre_maketables() can be used to
-generate a set of tables in the current locale. If the final argument for
-pcre_compile() is passed as NULL, a set of default tables that is built into
-the binary is used.
-
-The source file called chartables.c contains the default set of tables. This is
-not supplied in the distribution, but is built by the program dftables
-(compiled from dftables.c), which uses the ANSI C character handling functions
-such as isalnum(), isalpha(), isupper(), islower(), etc. to build the table
-sources. This means that the default C locale which is set for your system will
-control the contents of these default tables. You can change the default tables
-by editing chartables.c and then re-building PCRE. If you do this, you should
-probably also edit Makefile to ensure that the file doesn't ever get
-re-generated.
-
-The first two 256-byte tables provide lower casing and case flipping functions,
-respectively. The next table consists of three 32-byte bit maps which identify
-digits, "word" characters, and white space, respectively. These are used when
-building 32-byte bit maps that represent character classes.
-
-The final 256-byte table has bits indicating various character types, as
-follows:
-
-    1   white space character
-    2   letter
-    4   decimal digit
-    8   hexadecimal digit
-   16   alphanumeric or '_'
-  128   regular expression metacharacter or binary zero
-
-You should not alter the set of characters that contain the 128 bit, as that
-will cause PCRE to malfunction.
-
-
-Manifest
---------
-
-The distribution should contain the following files:
-
-(A) The actual source files of the PCRE library functions and their
-    headers:
-
-  dftables.c            auxiliary program for building chartables.c
-  get.c                 )
-  maketables.c          )
-  study.c               ) source of
-  pcre.c                )   the functions
-  pcreposix.c           )
-  pcre.in               "source" for the header for the external API; pcre.h
-                          is built from this by "configure"
-  pcreposix.h           header for the external POSIX wrapper API
-  internal.h            header for internal use
-  config.in             template for config.h, which is built by configure
-
-(B) Auxiliary files:
-
-  AUTHORS               information about the author of PCRE
-  ChangeLog             log of changes to the code
-  INSTALL               generic installation instructions
-  LICENCE               conditions for the use of PCRE
-  COPYING               the same, using GNU's standard name
-  Makefile.in           template for Unix Makefile, which is built by configure
-  NEWS                  important changes in this release
-  NON-UNIX-USE          notes on building PCRE on non-Unix systems
-  README                this file
-  RunTest.in            template for a Unix shell script for running tests
-  config.guess          ) files used by libtool,
-  config.sub            )   used only when building a shared library
-  configure             a configuring shell script (built by autoconf)
-  configure.in          the autoconf input used to build configure
-  doc/Tech.Notes        notes on the encoding
-  doc/pcre.3            man page source for the PCRE functions
-  doc/pcre.html         HTML version
-  doc/pcre.txt          plain text version
-  doc/pcreposix.3       man page source for the POSIX wrapper API
-  doc/pcreposix.html    HTML version
-  doc/pcreposix.txt     plain text version
-  doc/pcretest.txt      documentation of test program
-  doc/perltest.txt      documentation of Perl test program
-  doc/pcregrep.1        man page source for the pcregrep utility
-  doc/pcregrep.html     HTML version
-  doc/pcregrep.txt      plain text version
-  install-sh            a shell script for installing files
-  ltconfig              ) files used to build "libtool",
-  ltmain.sh             )   used only when building a shared library
-  pcretest.c            test program
-  perltest              Perl test program
-  perltest8             Perl test program for UTF-8 tests
-  pcregrep.c            source of a grep utility that uses PCRE
-  pcre-config.in        source of script which retains PCRE information
-  testdata/testinput1   test data, compatible with Perl 5.004 and 5.005
-  testdata/testinput2   test data for error messages and non-Perl things
-  testdata/testinput3   test data, compatible with Perl 5.005
-  testdata/testinput4   test data for locale-specific tests
-  testdata/testinput5   test data for UTF-8 tests compatible with Perl 5.6
-  testdata/testinput6   test data for other UTF-8 tests
-  testdata/testoutput1  test results corresponding to testinput1
-  testdata/testoutput2  test results corresponding to testinput2
-  testdata/testoutput3  test results corresponding to testinput3
-  testdata/testoutput4  test results corresponding to testinput4
-  testdata/testoutput5  test results corresponding to testinput5
-  testdata/testoutput6  test results corresponding to testinput6
-
-(C) Auxiliary files for Win32 DLL
-
-  dll.mk
-  pcre.def
-
-Philip Hazel <ph10@xxxxxxxxx>
-August 2000
diff --git a/external/privoxy/pcre/get.c b/external/privoxy/pcre/get.c
deleted file mode 100644
index 42e9bd4..0000000
--- a/external/privoxy/pcre/get.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/*
-This is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language. See
-the file Tech.Notes for some information on the internals.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-*/
-
-/* This module contains some convenience functions for extracting substrings
-from the subject string after a regex match has succeeded. The original idea
-for these functions came from Scott Wimer <scottw@xxxxxxxxxxxxxx>. */
-
-
-/* Include the internals header, which itself includes Standard C headers plus
-the external pcre header. */
-
-#include "internal.h"
-
-
-
-/*************************************************
-*      Copy captured string to given buffer      *
-*************************************************/
-
-/* This function copies a single captured substring into a given buffer.
-Note that we use memcpy() rather than strncpy() in case there are binary zeros
-in the string.
-
-Arguments:
-  subject        the subject string that was matched
-  ovector        pointer to the offsets table
-  stringcount    the number of substrings that were captured
-                   (i.e. the yield of the pcre_exec call, unless
-                   that was zero, in which case it should be 1/3
-                   of the offset table size)
-  stringnumber   the number of the required substring
-  buffer         where to put the substring
-  size           the size of the buffer
-
-Returns:         if successful:
-                   the length of the copied string, not including the zero
-                   that is put on the end; can be zero
-                 if not successful:
-                   PCRE_ERROR_NOMEMORY (-6) buffer too small
-                   PCRE_ERROR_NOSUBSTRING (-7) no such captured substring
-*/
-
-int
-pcre_copy_substring(const char *subject, int *ovector, int stringcount,
-  int stringnumber, char *buffer, int size)
-{
-int yield;
-if (stringnumber < 0 || stringnumber >= stringcount)
-  return PCRE_ERROR_NOSUBSTRING;
-stringnumber *= 2;
-yield = ovector[stringnumber+1] - ovector[stringnumber];
-if (size < yield + 1) return PCRE_ERROR_NOMEMORY;
-memcpy(buffer, subject + ovector[stringnumber], yield);
-buffer[yield] = 0;
-return yield;
-}
-
-
-
-/*************************************************
-*      Copy all captured strings to new store    *
-*************************************************/
-
-/* This function gets one chunk of store and builds a list of pointers and all
-of the captured substrings in it. A NULL pointer is put on the end of the list.
-
-Arguments:
-  subject        the subject string that was matched
-  ovector        pointer to the offsets table
-  stringcount    the number of substrings that were captured
-                   (i.e. the yield of the pcre_exec call, unless
-                   that was zero, in which case it should be 1/3
-                   of the offset table size)
-  listptr        set to point to the list of pointers
-
-Returns:         if successful: 0
-                 if not successful:
-                   PCRE_ERROR_NOMEMORY (-6) failed to get store
-*/
-
-int
-pcre_get_substring_list(const char *subject, int *ovector, int stringcount,
-  const char ***listptr)
-{
-int i;
-int size = sizeof(char *);
-int double_count = stringcount * 2;
-char **stringlist;
-char *p;
-
-for (i = 0; i < double_count; i += 2)
-  size += sizeof(char *) + ovector[i+1] - ovector[i] + 1;
-
-stringlist = (char **)(pcre_malloc)(size);
-if (stringlist == NULL) return PCRE_ERROR_NOMEMORY;
-
-*listptr = (const char **)stringlist;
-p = (char *)(stringlist + stringcount + 1);
-
-for (i = 0; i < double_count; i += 2)
-  {
-  int len = ovector[i+1] - ovector[i];
-  memcpy(p, subject + ovector[i], len);
-  *stringlist++ = p;
-  p += len;
-  *p++ = 0;
-  }
-
-*stringlist = NULL;
-return 0;
-}
-
-
-
-/*************************************************
-*   Free store obtained by get_substring_list    *
-*************************************************/
-
-/* This function exists for the benefit of people calling PCRE from non-C
-programs that can call its functions, but not free() or (pcre_free)() directly.
-
-Argument:   the result of a previous pcre_get_substring_list()
-Returns:    nothing
-*/
-
-void
-pcre_free_substring_list(const char **pointer)
-{
-(pcre_free)((void *)pointer);
-}
-
-
-
-/*************************************************
-*      Copy captured string to new store         *
-*************************************************/
-
-/* This function copies a single captured substring into a piece of new
-store
-
-Arguments:
-  subject        the subject string that was matched
-  ovector        pointer to the offsets table
-  stringcount    the number of substrings that were captured
-                   (i.e. the yield of the pcre_exec call, unless
-                   that was zero, in which case it should be 1/3
-                   of the offset table size)
-  stringnumber   the number of the required substring
-  stringptr      where to put a pointer to the substring
-
-Returns:         if successful:
-                   the length of the string, not including the zero that
-                   is put on the end; can be zero
-                 if not successful:
-                   PCRE_ERROR_NOMEMORY (-6) failed to get store
-                   PCRE_ERROR_NOSUBSTRING (-7) substring not present
-*/
-
-int
-pcre_get_substring(const char *subject, int *ovector, int stringcount,
-  int stringnumber, const char **stringptr)
-{
-int yield;
-char *substring;
-if (stringnumber < 0 || stringnumber >= stringcount)
-  return PCRE_ERROR_NOSUBSTRING;
-stringnumber *= 2;
-yield = ovector[stringnumber+1] - ovector[stringnumber];
-substring = (char *)(pcre_malloc)(yield + 1);
-if (substring == NULL) return PCRE_ERROR_NOMEMORY;
-memcpy(substring, subject + ovector[stringnumber], yield);
-substring[yield] = 0;
-*stringptr = substring;
-return yield;
-}
-
-
-
-/*************************************************
-*       Free store obtained by get_substring     *
-*************************************************/
-
-/* This function exists for the benefit of people calling PCRE from non-C
-programs that can call its functions, but not free() or (pcre_free)() directly.
-
-Argument:   the result of a previous pcre_get_substring()
-Returns:    nothing
-*/
-
-void
-pcre_free_substring(const char *pointer)
-{
-(pcre_free)((void *)pointer);
-}
-
-/* End of get.c */
diff --git a/external/privoxy/pcre/install b/external/privoxy/pcre/install
deleted file mode 100644
index 0880281..0000000
--- a/external/privoxy/pcre/install
+++ /dev/null
@@ -1,185 +0,0 @@
-Basic Installation
-==================
-
-   These are generic installation instructions that apply to systems that
-can run the `configure' shell script - Unix systems and any that imitate
-it. They are not specific to PCRE. There are PCRE-specific instructions
-for non-Unix systems in the file NON-UNIX-USE.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
diff --git a/external/privoxy/pcre/install-sh b/external/privoxy/pcre/install-sh
deleted file mode 100644
index e9de238..0000000
--- a/external/privoxy/pcre/install-sh
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/external/privoxy/pcre/internal.h b/external/privoxy/pcre/internal.h
deleted file mode 100644
index 25bb7f8..0000000
--- a/external/privoxy/pcre/internal.h
+++ /dev/null
@@ -1,381 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-
-/* This is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language. See
-the file Tech.Notes for some information on the internals.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-*/
-
-/* This header contains definitions that are shared between the different
-modules, but which are not relevant to the outside. */
-
-/* Get the definitions provided by running "configure" */
-
-#include "config.h"
-
-/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
-define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY
-is set. Otherwise, include an emulating function for those systems that have
-neither (there some non-Unix environments where this is the case). This assumes
-that all calls to memmove are moving strings upwards in store, which is the
-case in PCRE. */
-
-#if ! HAVE_MEMMOVE
-#undef  memmove        /* some systems may have a macro */
-#if HAVE_BCOPY
-#define memmove(a, b, c) bcopy(b, a, c)
-#else
-void *
-pcre_memmove(unsigned char *dest, const unsigned char *src, size_t n)
-{
-int i;
-dest += n;
-src += n;
-for (i = 0; i < n; ++i) *(--dest) =  *(--src);
-}
-#define memmove(a, b, c) pcre_memmove(a, b, c)
-#endif
-#endif
-
-/* Standard C headers plus the external interface definition */
-
-#include <ctype.h>
-#include <limits.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "pcre.h"
-
-/* In case there is no definition of offsetof() provided - though any proper
-Standard C system should have one. */
-
-#ifndef offsetof
-#define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field))
-#endif
-
-/* These are the public options that can change during matching. */
-
-#define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL)
-
-/* Private options flags start at the most significant end of the four bytes,
-but skip the top bit so we can use ints for convenience without getting tangled
-with negative values. The public options defined in pcre.h start at the least
-significant end. Make sure they don't overlap, though now that we have expanded
-to four bytes there is plenty of space. */
-
-#define PCRE_FIRSTSET      0x40000000  /* first_char is set */
-#define PCRE_REQCHSET      0x20000000  /* req_char is set */
-#define PCRE_STARTLINE     0x10000000  /* start after \n for multiline */
-#define PCRE_INGROUP       0x08000000  /* compiling inside a group */
-#define PCRE_ICHANGED      0x04000000  /* i option changes within regex */
-
-/* Options for the "extra" block produced by pcre_study(). */
-
-#define PCRE_STUDY_MAPPED   0x01     /* a map of starting chars exists */
-
-/* Masks for identifying the public options which are permitted at compile
-time, run time or study time, respectively. */
-
-#define PUBLIC_OPTIONS \
-  (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
-   PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8)
-
-#define PUBLIC_EXEC_OPTIONS \
-  (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY)
-
-#define PUBLIC_STUDY_OPTIONS 0   /* None defined */
-
-/* Magic number to provide a small check against being handed junk. */
-
-#define MAGIC_NUMBER  0x50435245UL   /* 'PCRE' */
-
-/* Miscellaneous definitions */
-
-typedef int BOOL;
-
-#define FALSE   0
-#define TRUE    1
-
-/* These are escaped items that aren't just an encoding of a particular data
-value such as \n. They must have non-zero values, as check_escape() returns
-their negation. Also, they must appear in the same order as in the opcode
-definitions below, up to ESC_z. The final one must be ESC_REF as subsequent
-values are used for \1, \2, \3, etc. There is a test in the code for an escape
-greater than ESC_b and less than ESC_X to detect the types that may be
-repeated. If any new escapes are put in-between that don't consume a character,
-that code will have to change. */
-
-enum { ESC_A = 1, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, ESC_w,
-       ESC_Z, ESC_z, ESC_REF };
-
-/* Opcode table: OP_BRA must be last, as all values >= it are used for brackets
-that extract substrings. Starting from 1 (i.e. after OP_END), the values up to
-OP_EOD must correspond in order to the list of escapes immediately above. */
-
-enum {
-  OP_END,            /* End of pattern */
-
-  /* Values corresponding to backslashed metacharacters */
-
-  OP_SOD,            /* Start of data: \A */
-  OP_NOT_WORD_BOUNDARY,  /* \B */
-  OP_WORD_BOUNDARY,      /* \b */
-  OP_NOT_DIGIT,          /* \D */
-  OP_DIGIT,              /* \d */
-  OP_NOT_WHITESPACE,     /* \S */
-  OP_WHITESPACE,         /* \s */
-  OP_NOT_WORDCHAR,       /* \W */
-  OP_WORDCHAR,           /* \w */
-  OP_EODN,           /* End of data or \n at end of data: \Z. */
-  OP_EOD,            /* End of data: \z */
-
-  OP_OPT,            /* Set runtime options */
-  OP_CIRC,           /* Start of line - varies with multiline switch */
-  OP_DOLL,           /* End of line - varies with multiline switch */
-  OP_ANY,            /* Match any character */
-  OP_CHARS,          /* Match string of characters */
-  OP_NOT,            /* Match anything but the following char */
-
-  OP_STAR,           /* The maximizing and minimizing versions of */
-  OP_MINSTAR,        /* all these opcodes must come in pairs, with */
-  OP_PLUS,           /* the minimizing one second. */
-  OP_MINPLUS,        /* This first set applies to single characters */
-  OP_QUERY,
-  OP_MINQUERY,
-  OP_UPTO,           /* From 0 to n matches */
-  OP_MINUPTO,
-  OP_EXACT,          /* Exactly n matches */
-
-  OP_NOTSTAR,        /* The maximizing and minimizing versions of */
-  OP_NOTMINSTAR,     /* all these opcodes must come in pairs, with */
-  OP_NOTPLUS,        /* the minimizing one second. */
-  OP_NOTMINPLUS,     /* This first set applies to "not" single characters */
-  OP_NOTQUERY,
-  OP_NOTMINQUERY,
-  OP_NOTUPTO,        /* From 0 to n matches */
-  OP_NOTMINUPTO,
-  OP_NOTEXACT,       /* Exactly n matches */
-
-  OP_TYPESTAR,       /* The maximizing and minimizing versions of */
-  OP_TYPEMINSTAR,    /* all these opcodes must come in pairs, with */
-  OP_TYPEPLUS,       /* the minimizing one second. These codes must */
-  OP_TYPEMINPLUS,    /* be in exactly the same order as those above. */
-  OP_TYPEQUERY,      /* This set applies to character types such as \d */
-  OP_TYPEMINQUERY,
-  OP_TYPEUPTO,       /* From 0 to n matches */
-  OP_TYPEMINUPTO,
-  OP_TYPEEXACT,      /* Exactly n matches */
-
-  OP_CRSTAR,         /* The maximizing and minimizing versions of */
-  OP_CRMINSTAR,      /* all these opcodes must come in pairs, with */
-  OP_CRPLUS,         /* the minimizing one second. These codes must */
-  OP_CRMINPLUS,      /* be in exactly the same order as those above. */
-  OP_CRQUERY,        /* These are for character classes and back refs */
-  OP_CRMINQUERY,
-  OP_CRRANGE,        /* These are different to the three seta above. */
-  OP_CRMINRANGE,
-
-  OP_CLASS,          /* Match a character class */
-  OP_REF,            /* Match a back reference */
-  OP_RECURSE,        /* Match this pattern recursively */
-
-  OP_ALT,            /* Start of alternation */
-  OP_KET,            /* End of group that doesn't have an unbounded repeat */
-  OP_KETRMAX,        /* These two must remain together and in this */
-  OP_KETRMIN,        /* order. They are for groups the repeat for ever. */
-
-  /* The assertions must come before ONCE and COND */
-
-  OP_ASSERT,         /* Positive lookahead */
-  OP_ASSERT_NOT,     /* Negative lookahead */
-  OP_ASSERTBACK,     /* Positive lookbehind */
-  OP_ASSERTBACK_NOT, /* Negative lookbehind */
-  OP_REVERSE,        /* Move pointer back - used in lookbehind assertions */
-
-  /* ONCE and COND must come after the assertions, with ONCE first, as there's
-  a test for >= ONCE for a subpattern that isn't an assertion. */
-
-  OP_ONCE,           /* Once matched, don't back up into the subpattern */
-  OP_COND,           /* Conditional group */
-  OP_CREF,           /* Used to hold an extraction string number */
-
-  OP_BRAZERO,        /* These two must remain together and in this */
-  OP_BRAMINZERO,     /* order. */
-
-  OP_BRA             /* This and greater values are used for brackets that
-                        extract substrings. */
-};
-
-/* The highest extraction number. This is limited by the number of opcodes
-left after OP_BRA, i.e. 255 - OP_BRA. We actually set it somewhat lower. */
-
-#define EXTRACT_MAX  99
-
-/* The texts of compile-time error messages are defined as macros here so that
-they can be accessed by the POSIX wrapper and converted into error codes.  Yes,
-I could have used error codes in the first place, but didn't feel like changing
-just to accommodate the POSIX wrapper. */
-
-#define ERR1  "\\ at end of pattern"
-#define ERR2  "\\c at end of pattern"
-#define ERR3  "unrecognized character follows \\"
-#define ERR4  "numbers out of order in {} quantifier"
-#define ERR5  "number too big in {} quantifier"
-#define ERR6  "missing terminating ] for character class"
-#define ERR7  "invalid escape sequence in character class"
-#define ERR8  "range out of order in character class"
-#define ERR9  "nothing to repeat"
-#define ERR10 "operand of unlimited repeat could match the empty string"
-#define ERR11 "internal error: unexpected repeat"
-#define ERR12 "unrecognized character after (?"
-#define ERR13 "too many capturing parenthesized sub-patterns"
-#define ERR14 "missing )"
-#define ERR15 "back reference to non-existent subpattern"
-#define ERR16 "erroffset passed as NULL"
-#define ERR17 "unknown option bit(s) set"
-#define ERR18 "missing ) after comment"
-#define ERR19 "too many sets of parentheses"
-#define ERR20 "regular expression too large"
-#define ERR21 "failed to get memory"
-#define ERR22 "unmatched parentheses"
-#define ERR23 "internal error: code overflow"
-#define ERR24 "unrecognized character after (?<"
-#define ERR25 "lookbehind assertion is not fixed length"
-#define ERR26 "malformed number after (?("
-#define ERR27 "conditional group contains more than two branches"
-#define ERR28 "assertion expected after (?("
-#define ERR29 "(?p must be followed by )"
-#define ERR30 "unknown POSIX class name"
-#define ERR31 "POSIX collating elements are not supported"
-#define ERR32 "this version of PCRE is not compiled with PCRE_UTF8 support"
-#define ERR33 "characters with values > 255 are not yet supported in classes"
-#define ERR34 "character value in \\x{...} sequence is too large"
-#define ERR35 "invalid condition (?(0)"
-
-/* All character handling must be done as unsigned characters. Otherwise there
-are problems with top-bit-set characters and functions such as isspace().
-However, we leave the interface to the outside world as char *, because that
-should make things easier for callers. We define a short type for unsigned char
-to save lots of typing. I tried "uchar", but it causes problems on Digital
-Unix, where it is defined in sys/types, so use "uschar" instead. */
-
-typedef unsigned char uschar;
-
-/* The real format of the start of the pcre block; the actual code vector
-runs on as long as necessary after the end. */
-
-typedef struct real_pcre {
-  unsigned long int magic_number;
-  size_t size;
-  const unsigned char *tables;
-  unsigned long int options;
-  uschar top_bracket;
-  uschar top_backref;
-  uschar first_char;
-  uschar req_char;
-  uschar code[1];
-} real_pcre;
-
-/* The real format of the extra block returned by pcre_study(). */
-
-typedef struct real_pcre_extra {
-  uschar options;
-  uschar start_bits[32];
-} real_pcre_extra;
-
-
-/* Structure for passing "static" information around between the functions
-doing the compiling, so that they are thread-safe. */
-
-typedef struct compile_data {
-  const uschar *lcc;            /* Points to lower casing table */
-  const uschar *fcc;            /* Points to case-flipping table */
-  const uschar *cbits;          /* Points to character type table */
-  const uschar *ctypes;         /* Points to table of type maps */
-} compile_data;
-
-/* Structure for passing "static" information around between the functions
-doing the matching, so that they are thread-safe. */
-
-typedef struct match_data {
-  int    errorcode;             /* As it says */
-  int   *offset_vector;         /* Offset vector */
-  int    offset_end;            /* One past the end */
-  int    offset_max;            /* The maximum usable for return data */
-  const uschar *lcc;            /* Points to lower casing table */
-  const uschar *ctypes;         /* Points to table of type maps */
-  BOOL   offset_overflow;       /* Set if too many extractions */
-  BOOL   notbol;                /* NOTBOL flag */
-  BOOL   noteol;                /* NOTEOL flag */
-  BOOL   utf8;                  /* UTF8 flag */
-  BOOL   endonly;               /* Dollar not before final \n */
-  BOOL   notempty;              /* Empty string match not wanted */
-  const uschar *start_pattern;  /* For use when recursing */
-  const uschar *start_subject;  /* Start of the subject string */
-  const uschar *end_subject;    /* End of the subject string */
-  const uschar *start_match;    /* Start of this match attempt */
-  const uschar *end_match_ptr;  /* Subject position at end match */
-  int    end_offset_top;        /* Highwater mark at end of match */
-} match_data;
-
-/* Bit definitions for entries in the pcre_ctypes table. */
-
-#define ctype_space   0x01
-#define ctype_letter  0x02
-#define ctype_digit   0x04
-#define ctype_xdigit  0x08
-#define ctype_word    0x10   /* alphameric or '_' */
-#define ctype_meta    0x80   /* regexp meta char or zero (end pattern) */
-
-/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
-of bits for a class map. Some classes are built by combining these tables. */
-
-#define cbit_space     0      /* [:space:] or \s */
-#define cbit_xdigit   32      /* [:xdigit:] */
-#define cbit_digit    64      /* [:digit:] or \d */
-#define cbit_upper    96      /* [:upper:] */
-#define cbit_lower   128      /* [:lower:] */
-#define cbit_word    160      /* [:word:] or \w */
-#define cbit_graph   192      /* [:graph:] */
-#define cbit_print   224      /* [:print:] */
-#define cbit_punct   256      /* [:punct:] */
-#define cbit_cntrl   288      /* [:cntrl:] */
-#define cbit_length  320      /* Length of the cbits table */
-
-/* Offsets of the various tables from the base tables pointer, and
-total length. */
-
-#define lcc_offset      0
-#define fcc_offset    256
-#define cbits_offset  512
-#define ctypes_offset (cbits_offset + cbit_length)
-#define tables_length (ctypes_offset + 256)
-
-/* End of internal.h */
diff --git a/external/privoxy/pcre/licence b/external/privoxy/pcre/licence
deleted file mode 100644
index 34d20db..0000000
--- a/external/privoxy/pcre/licence
+++ /dev/null
@@ -1,46 +0,0 @@
-PCRE LICENCE
-------------
-
-PCRE is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-University of Cambridge Computing Service,
-Cambridge, England. Phone: +44 1223 334714.
-
-Copyright (c) 1997-2000 University of Cambridge
-
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission. In practice, this means that if you use
-   PCRE in software which you distribute to others, commercially or
-   otherwise, you must put a sentence like this
-
-     Regular expression support is provided by the PCRE library package,
-     which is open source software, written by Philip Hazel, and copyright
-     by the University of Cambridge, England.
-
-   somewhere reasonably visible in your documentation and in any relevant
-   files or online help data or similar. A reference to the ftp site for
-   the source, that is, to
-
-     ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
-
-   should also be given in the documentation.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
-
-End
diff --git a/external/privoxy/pcre/ltconfig b/external/privoxy/pcre/ltconfig
deleted file mode 100644
index a01334f..0000000
--- a/external/privoxy/pcre/ltconfig
+++ /dev/null
@@ -1,3078 +0,0 @@
-#! /bin/sh
-
-# ltconfig - Create a system-specific libtool.
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@xxxxxxxxxxxxxx>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A lot of this script is taken from autoconf-2.10.
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-echo=echo
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) PATH_SEPARATOR=';' ;;
-    *)     PATH_SEPARATOR=':' ;;
-  esac
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test "X${echo_test_string+set}" != Xset; then
-  # find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
-   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-  for dir in $PATH /usr/ucb; do
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running ltconfig again with it.
-      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf "%s\n"'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
-	   test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-	CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
-	   test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# The name of this program.
-progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
-
-# Constants:
-PROGRAM=ltconfig
-PACKAGE=libtool
-VERSION=1.3.4
-TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-rm="rm -f"
-
-help="Try \`$progname --help' for more information."
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-enable_shared=yes
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-enable_static=yes
-enable_fast_install=yes
-enable_dlopen=unknown
-enable_win32_dll=no
-ltmain=
-silent=
-srcdir=
-ac_config_guess=
-ac_config_sub=
-host=
-nonopt=
-ofile="$default_ofile"
-verify_host=yes
-with_gcc=no
-with_gnu_ld=no
-need_locks=yes
-ac_ext=c
-objext=o
-libext=a
-exeext=
-cache_file=
-
-old_AR="$AR"
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-old_CPPFLAGS="$CPPFLAGS"
-old_LDFLAGS="$LDFLAGS"
-old_LD="$LD"
-old_LN_S="$LN_S"
-old_LIBS="$LIBS"
-old_NM="$NM"
-old_RANLIB="$RANLIB"
-old_DLLTOOL="$DLLTOOL"
-old_OBJDUMP="$OBJDUMP"
-old_AS="$AS"
-
-# Parse the command line options.
-args=
-prev=
-for option
-do
-  case "$option" in
-  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    eval "$prev=\$option"
-    prev=
-    continue
-  fi
-
-  case "$option" in
-  --help) cat <<EOM
-Usage: $progname [OPTION]... [HOST [LTMAIN]]
-
-Generate a system-specific libtool script.
-
-    --debug                enable verbose shell tracing
-    --disable-shared       do not build shared libraries
-    --disable-static       do not build static libraries
-    --disable-fast-install do not optimize for fast installation
-    --enable-dlopen        enable dlopen support
-    --enable-win32-dll     enable building dlls on win32 hosts
-    --help                 display this help and exit
-    --no-verify            do not verify that HOST is a valid host type
--o, --output=FILE          specify the output file [default=$default_ofile]
-    --quiet                same as \`--silent'
-    --silent               do not print informational messages
-    --srcdir=DIR           find \`config.guess' in DIR
-    --version              output version information and exit
-    --with-gcc             assume that the GNU C compiler will be used
-    --with-gnu-ld          assume that the C compiler uses the GNU linker
-    --disable-lock         disable file locking
-    --cache-file=FILE      configure cache file
-
-LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
-that provides basic libtool functionality.
-
-HOST is the canonical host system name [default=guessed].
-EOM
-  exit 0
-  ;;
-
-  --debug)
-    echo "$progname: enabling shell trace mode"
-    set -x
-    ;;
-
-  --disable-shared) enable_shared=no ;;
-
-  --disable-static) enable_static=no ;;
-
-  --disable-fast-install) enable_fast_install=no ;;
-
-  --enable-dlopen) enable_dlopen=yes ;;
-
-  --enable-win32-dll) enable_win32_dll=yes ;;
-
-  --quiet | --silent) silent=yes ;;
-
-  --srcdir) prev=srcdir ;;
-  --srcdir=*) srcdir="$optarg" ;;
-
-  --no-verify) verify_host=no ;;
-
-  --output | -o) prev=ofile ;;
-  --output=*) ofile="$optarg" ;;
-
-  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
-
-  --with-gcc) with_gcc=yes ;;
-  --with-gnu-ld) with_gnu_ld=yes ;;
-
-  --disable-lock) need_locks=no ;;
-
-  --cache-file=*) cache_file="$optarg" ;;
-
-  -*)
-    echo "$progname: unrecognized option \`$option'" 1>&2
-    echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    if test -z "$ltmain"; then
-      ltmain="$option"
-    elif test -z "$host"; then
-# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
-#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
-#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
-#      fi
-      host="$option"
-    else
-      echo "$progname: too many arguments" 1>&2
-      echo "$help" 1>&2
-      exit 1
-    fi ;;
-  esac
-done
-
-if test -z "$ltmain"; then
-  echo "$progname: you must specify a LTMAIN file" 1>&2
-  echo "$help" 1>&2
-  exit 1
-fi
-
-if test ! -f "$ltmain"; then
-  echo "$progname: \`$ltmain' does not exist" 1>&2
-  echo "$help" 1>&2
-  exit 1
-fi
-
-# Quote any args containing shell metacharacters.
-ltconfig_args=
-for arg
-do
-  case "$arg" in
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ltconfig_args="$ltconfig_args '$arg'" ;;
-  *) ltconfig_args="$ltconfig_args $arg" ;;
-  esac
-done
-
-# A relevant subset of AC_INIT.
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>>./config.log
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
-if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
-
-if test -n "$cache_file" && test -r "$cache_file"; then
-  echo "loading cache $cache_file within ltconfig"
-  . $cache_file
-fi
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@xxxxxxxxxxxxxxxxx
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-if test -z "$srcdir"; then
-  # Assume the source directory is the same one as the path to LTMAIN.
-  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
-  test "$srcdir" = "$ltmain" && srcdir=.
-fi
-
-trap "$rm conftest*; exit 1" 1 2 15
-if test "$verify_host" = yes; then
-  # Check for config.guess and config.sub.
-  ac_aux_dir=
-  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-    if test -f $ac_dir/config.guess; then
-      ac_aux_dir=$ac_dir
-      break
-    fi
-  done
-  if test -z "$ac_aux_dir"; then
-    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
-    echo "$help" 1>&2
-    exit 1
-  fi
-  ac_config_guess=$ac_aux_dir/config.guess
-  ac_config_sub=$ac_aux_dir/config.sub
-
-  # Make sure we can run config.sub.
-  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
-  else
-    echo "$progname: cannot run $ac_config_sub" 1>&2
-    echo "$help" 1>&2
-    exit 1
-  fi
-
-  echo $ac_n "checking host system type""... $ac_c" 1>&6
-
-  host_alias=$host
-  case "$host_alias" in
-  "")
-    if host_alias=`$SHELL $ac_config_guess`; then :
-    else
-      echo "$progname: cannot guess host type; you must specify one" 1>&2
-      echo "$help" 1>&2
-      exit 1
-    fi ;;
-  esac
-  host=`$SHELL $ac_config_sub $host_alias`
-  echo "$ac_t$host" 1>&6
-
-  # Make sure the host verified.
-  test -z "$host" && exit 1
-
-elif test -z "$host"; then
-  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
-  echo "$help" 1>&2
-  exit 1
-else
-  host_alias=$host
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case "$host_os" in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-case "$host_os" in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR cru $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-# Set a sane default for `AR'.
-test -z "$AR" && AR=ar
-
-# Set a sane default for `OBJDUMP'.
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-# If RANLIB is not set, then run the test.
-if test "${RANLIB+set}" != "set"; then
-  result=no
-
-  echo $ac_n "checking for ranlib... $ac_c" 1>&6
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
-      RANLIB="ranlib"
-      result="ranlib"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  echo "$ac_t$result" 1>&6
-fi
-
-if test -n "$RANLIB"; then
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-fi
-
-# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$AS" && AS=as
-
-# Check to see if we are using GCC.
-if test "$with_gcc" != yes || test -z "$CC"; then
-  # If CC is not set, then try to find GCC or a usable CC.
-  if test -z "$CC"; then
-    echo $ac_n "checking for gcc... $ac_c" 1>&6
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
-	CC="gcc"
-	break
-      fi
-    done
-    IFS="$save_ifs"
-
-    if test -n "$CC"; then
-      echo "$ac_t$CC" 1>&6
-    else
-      echo "$ac_t"no 1>&6
-    fi
-  fi
-
-  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
-  if test -z "$CC"; then
-    echo $ac_n "checking for cc... $ac_c" 1>&6
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-    cc_rejected=no
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
-	if test "$dir/cc" = "/usr/ucb/cc"; then
-	  cc_rejected=yes
-	  continue
-	fi
-	CC="cc"
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    if test $cc_rejected = yes; then
-      # We found a bogon in the path, so make sure we never use it.
-      set dummy $CC
-      shift
-      if test $# -gt 0; then
-	# We chose a different compiler from the bogus one.
-	# However, it has the same name, so the bogon will be chosen
-	# first if we set CC to just the name; use the full file name.
-	shift
-	set dummy "$dir/cc" "$@"
-	shift
-	CC="$@"
-      fi
-    fi
-
-    if test -n "$CC"; then
-      echo "$ac_t$CC" 1>&6
-    else
-      echo "$ac_t"no 1>&6
-    fi
-
-    if test -z "$CC"; then
-      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
-      exit 1
-    fi
-  fi
-
-  # Now see if the compiler is really GCC.
-  with_gcc=no
-  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
-  echo "$progname:581: checking whether we are using GNU C" >&5
-
-  $rm conftest.c
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-    with_gcc=yes
-  fi
-  $rm conftest.c
-  echo "$ac_t$with_gcc" 1>&6
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-echo $ac_n "checking for object suffix... $ac_c" 1>&6
-$rm conftest*
-echo 'int i = 1;' > conftest.c
-echo "$progname:603: checking for object suffix" >& 5
-if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
-  # Append any warnings to the config.log.
-  cat conftest.err 1>&5
-
-  for ac_file in conftest.*; do
-    case $ac_file in
-    *.c) ;;
-    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
-    esac
-  done
-else
-  cat conftest.err 1>&5
-  echo "$progname: failed program was:" >&5
-  cat conftest.c >&5
-fi
-$rm conftest*
-echo "$ac_t$objext" 1>&6
-
-echo $ac_n "checking for executable suffix... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_exeext="no"
-  $rm conftest*
-  echo 'main () { return 0; }' > conftest.c
-  echo "$progname:629: checking for executable suffix" >& 5
-  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
-    # Append any warnings to the config.log.
-    cat conftest.err 1>&5
-
-    for ac_file in conftest.*; do
-      case $ac_file in
-      *.c | *.err | *.$objext ) ;;
-      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
-      esac
-    done
-  else
-    cat conftest.err 1>&5
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  $rm conftest*
-fi
-if test "X$ac_cv_exeext" = Xno; then
-  exeext=""
-else
-  exeext="$ac_cv_exeext"
-fi
-echo "$ac_t$ac_cv_exeext" 1>&6
-
-echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
-pic_flag=
-special_shlib_compile_flags=
-wl=
-link_static_flag=
-no_builtin_flag=
-
-if test "$with_gcc" = yes; then
-  wl='-Wl,'
-  link_static_flag='-static'
-
-  case "$host_os" in
-  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-    # PIC is the default for these OSes.
-    ;;
-  aix*)
-    # Below there is a dirty hack to force normal static linking with -ldl
-    # The problem is because libdl dynamically linked with both libc and
-    # libC (AIX C++ library), which obviously doesn't included in libraries
-    # list by gcc. This cause undefined symbols with -static flags.
-    # This hack allows C programs to be linked with "-static -ldl", but
-    # we not sure about C++ programs.
-    link_static_flag="$link_static_flag ${wl}-lC"
-    ;;
-  cygwin* | mingw* | os2*)
-    # We can build DLLs from non-PIC.
-    ;;
-  amigaos*)
-    # FIXME: we need at least 68020 code to build shared libraries, but
-    # adding the `-m68020' flag to GCC prevents building anything better,
-    # like `-m68040'.
-    pic_flag='-m68020 -resident32 -malways-restore-a4'
-    ;;
-  sysv4*MP*)
-    if test -d /usr/nec; then
-       pic_flag=-Kconform_pic
-    fi
-    ;;
-  *)
-    pic_flag='-fPIC'
-    ;;
-  esac
-else
-  # PORTME Check for PIC flags for the system compiler.
-  case "$host_os" in
-  aix3* | aix4*)
-    # All AIX code is PIC.
-    link_static_flag='-bnso -bI:/lib/syscalls.exp'
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    # Is there a better link_static_flag that works with the bundled CC?
-    wl='-Wl,'
-    link_static_flag="${wl}-a ${wl}archive"
-    pic_flag='+Z'
-    ;;
-
-  irix5* | irix6*)
-    wl='-Wl,'
-    link_static_flag='-non_shared'
-    # PIC (with -KPIC) is the default.
-    ;;
-
-  cygwin* | mingw* | os2*)
-    # We can build DLLs from non-PIC.
-    ;;
-
-  osf3* | osf4* | osf5*)
-    # All OSF/1 code is PIC.
-    wl='-Wl,'
-    link_static_flag='-non_shared'
-    ;;
-
-  sco3.2v5*)
-    pic_flag='-Kpic'
-    link_static_flag='-dn'
-    special_shlib_compile_flags='-belf'
-    ;;
-
-  solaris*)
-    pic_flag='-KPIC'
-    link_static_flag='-Bstatic'
-    wl='-Wl,'
-    ;;
-
-  sunos4*)
-    pic_flag='-PIC'
-    link_static_flag='-Bstatic'
-    wl='-Qoption ld '
-    ;;
-
-  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-    pic_flag='-KPIC'
-    link_static_flag='-Bstatic'
-    wl='-Wl,'
-    ;;
-
-  uts4*)
-    pic_flag='-pic'
-    link_static_flag='-Bstatic'
-    ;;
-  sysv4*MP*)
-    if test -d /usr/nec ;then
-      pic_flag='-Kconform_pic'
-      link_static_flag='-Bstatic'
-    fi
-    ;;
-  *)
-    can_build_shared=no
-    ;;
-  esac
-fi
-
-if test -n "$pic_flag"; then
-  echo "$ac_t$pic_flag" 1>&6
-
-  # Check to make sure the pic_flag actually works.
-  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
-  $rm conftest*
-  echo "int some_variable = 0;" > conftest.c
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $pic_flag -DPIC"
-  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
-  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
-    # Append any warnings to the config.log.
-    cat conftest.err 1>&5
-    
-    case "$host_os" in
-    hpux9* | hpux10* | hpux11*)
-      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
-      # create non-PIC objects.  So, if there were any warnings, we assume that
-      # PIC is not supported.
-      if test -s conftest.err; then
-	echo "$ac_t"no 1>&6
-	can_build_shared=no
-	pic_flag=
-      else
-	echo "$ac_t"yes 1>&6
-	pic_flag=" $pic_flag"
-      fi
-      ;;
-    *)
-      echo "$ac_t"yes 1>&6
-      pic_flag=" $pic_flag"
-      ;;
-    esac
-  else
-    # Append any errors to the config.log.
-    cat conftest.err 1>&5
-    can_build_shared=no
-    pic_flag=
-    echo "$ac_t"no 1>&6
-  fi
-  CFLAGS="$save_CFLAGS"
-  $rm conftest*
-else
-  echo "$ac_t"none 1>&6
-fi
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-$rm conftest*
-echo "int some_variable = 0;" > conftest.c
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory.  Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.o"
-echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
-if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
-
-  # The compiler can only warn and ignore the option if not recognized
-  # So say no if there are warnings
-    if test -s out/conftest.err; then
-      echo "$ac_t"no 1>&6
-      compiler_c_o=no
-    else
-      echo "$ac_t"yes 1>&6
-      compiler_c_o=yes
-    fi
-else
-  # Append any errors to the config.log.
-  cat out/conftest.err 1>&5
-  compiler_c_o=no
-  echo "$ac_t"no 1>&6
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-
-if test x"$compiler_c_o" = x"yes"; then
-  # Check to see if we can write to a .lo
-  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
-  $rm conftest*
-  echo "int some_variable = 0;" > conftest.c
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -c -o conftest.lo"
-  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
-if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
-
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-      if test -s conftest.err; then
-	echo "$ac_t"no 1>&6
-	compiler_o_lo=no
-      else
-	echo "$ac_t"yes 1>&6
-	compiler_o_lo=yes
-      fi
-  else
-    # Append any errors to the config.log.
-    cat conftest.err 1>&5
-    compiler_o_lo=no
-    echo "$ac_t"no 1>&6
-  fi
-  CFLAGS="$save_CFLAGS"
-  $rm conftest*
-else
-  compiler_o_lo=no
-fi
-
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$ac_t$hard_links" 1>&6
-  $rm conftest*
-  if test "$hard_links" = no; then
-    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-if test "$with_gcc" = yes; then
-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
-  $rm conftest*
-  echo "int some_variable = 0;" > conftest.c
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
-  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
-
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-      if test -s conftest.err; then
-	echo "$ac_t"no 1>&6
-	compiler_rtti_exceptions=no
-      else
-	echo "$ac_t"yes 1>&6
-	compiler_rtti_exceptions=yes
-      fi
-  else
-    # Append any errors to the config.log.
-    cat conftest.err 1>&5
-    compiler_rtti_exceptions=no
-    echo "$ac_t"no 1>&6
-  fi
-  CFLAGS="$save_CFLAGS"
-  $rm conftest*
-
-  if test "$compiler_rtti_exceptions" = "yes"; then
-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-  else
-    no_builtin_flag=' -fno-builtin'
-  fi
-  
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$special_shlib_compile_flags"; then
-  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
-  else
-    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
-    can_build_shared=no
-  fi
-fi
-
-echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
-$rm conftest*
-echo 'main(){return(0);}' > conftest.c
-save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $link_static_flag"
-echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
-if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  echo "$ac_t$link_static_flag" 1>&6
-else
-  echo "$ac_t"none 1>&6
-  link_static_flag=
-fi
-LDFLAGS="$save_LDFLAGS"
-$rm conftest*
-
-if test -z "$LN_S"; then
-  # Check to see if we can use ln -s, or we need hard links.
-  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
-  $rm conftest.dat
-  if ln -s X conftest.dat 2>/dev/null; then
-    $rm conftest.dat
-    LN_S="ln -s"
-  else
-    LN_S=ln
-  fi
-  if test "$LN_S" = "ln -s"; then
-    echo "$ac_t"yes 1>&6
-  else
-    echo "$ac_t"no 1>&6
-  fi
-fi
-
-# Make sure LD is an absolute path.
-if test -z "$LD"; then
-  ac_prog=ld
-  if test "$with_gcc" = yes; then
-    # Check if gcc -print-prog-name=ld gives a path.
-    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
-    echo "$progname:991: checking for ld used by GCC" >&5
-    ac_prog=`($CC -print-prog-name=ld) 2>&5`
-    case "$ac_prog" in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-    "")
-      # If it fails, then pretend we are not using GCC.
-      ac_prog=ld
-      ;;
-    *)
-      # If it is relative, then search for the first ld in PATH.
-      with_gnu_ld=unknown
-      ;;
-    esac
-  elif test "$with_gnu_ld" = yes; then
-    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
-    echo "$progname:1015: checking for GNU ld" >&5
-  else
-    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-    echo "$progname:1018: checking for non-GNU ld" >&5
-  fi
-
-  if test -z "$LD"; then
-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-    for ac_dir in $PATH; do
-      test -z "$ac_dir" && ac_dir=.
-      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-	LD="$ac_dir/$ac_prog"
-	# Check to see if the program is GNU ld.  I'd rather use --version,
-	# but apparently some GNU ld's only accept -v.
-	# Break only if it was the GNU/non-GNU ld that we prefer.
-	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	  test "$with_gnu_ld" != no && break
-	else
-	  test "$with_gnu_ld" != yes && break
-	fi
-      fi
-    done
-    IFS="$ac_save_ifs"
-  fi
-
-  if test -n "$LD"; then
-    echo "$ac_t$LD" 1>&6
-  else
-    echo "$ac_t"no 1>&6
-  fi
-
-  if test -z "$LD"; then
-    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
-    exit 1
-  fi
-fi
-
-# Check to see if it really is or is not GNU ld.
-echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
-# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-echo "$ac_t$with_gnu_ld" 1>&6
-
-# See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced.  Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-
-case "$host_os" in
-cygwin* | mingw*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$with_gcc" != yes; then
-    with_gnu_ld=no
-  fi
-  ;;
-
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
-
-  # See if GNU ld supports shared libraries.
-  case "$host_os" in
-  aix3* | aix4*)
-    # On AIX, the GNU linker is very broken
-    ld_shlibs=no
-    cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@xxxxxxxxxxxxxxxxxxxxxxxx> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@xxxxxxxx> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  cygwin* | mingw*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
-      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
-      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
-
-    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
-      _lt_hint=1;
-      for symbol in `cat $export_symbols`; do
-	echo "	\$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
-	_lt_hint=`expr 1 + \$_lt_hint`;
-      done~
-      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
-      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
-      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
-      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
-      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
-
-      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' 
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
-      # can we support soname and/or expsyms with a.out? -oliva
-    fi
-    ;;
-
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;      
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-  esac
-
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-        whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-        whole_archive_flag_spec=
-      fi
-      ;;
-    esac
-  fi
-else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case "$host_os" in
-  aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4*)
-    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
-    hardcode_libdir_separator=':'
-    if test "$with_gcc" = yes; then
-      collect2name=`${CC} -print-prog-name=collect2`
-      if test -f "$collect2name" && \
-	 strings "$collect2name" | grep resolve_lib_name >/dev/null
-      then
-	# We have reworked collect2
-	hardcode_direct=yes
-      else
-	# We have old collect2
-	hardcode_direct=unsupported
-	# It fails to find uninstalled libraries when the uninstalled
-	# path is not listed in the libpath.  Setting hardcode_minus_L
-	# to unsupported forces relinking
-	hardcode_minus_L=yes
-	hardcode_libdir_flag_spec='-L$libdir'
-	hardcode_libdir_separator=
-      fi
-      shared_flag='-shared'
-    else
-      shared_flag='${wl}-bM:SRE'
-      hardcode_direct=yes
-    fi
-    allow_undefined_flag=' ${wl}-berok'
-    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
-    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
-    case "$host_os" in aix4.[01]|aix4.[01].*)
-      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
-      always_export_symbols=yes ;;
-    esac
-   ;;
-
-  amigaos*)
-    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
-    ;;
-
-  cygwin* | mingw*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
-    fix_srcfile_path='`cygpath -w $srcfile`'
-    ;;
-
-  freebsd1*)
-    ld_shlibs=no
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    case "$host_os" in
-    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
-    esac
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_direct=yes
-    hardcode_minus_L=yes # Not in the search PATH, but as the default
-			 # location of the library.
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  irix5* | irix6*)
-    if test "$with_gcc" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-    else
-      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
-    else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
-    fi
-    hardcode_libdir_flag_spec='${wl}-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
-    ;;
-
-  osf3*)
-    if test "$with_gcc" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  osf4* | osf5*)  # As osf3* with the addition of the -msym flag
-    if test "$with_gcc" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    ;;
-
-  solaris*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case "$host_os" in
-    solaris2.[0-5] | solaris2.[0-5].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-    esac
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
-    ;;  
-
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
-
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-      hardcode_shlibpath_var=no
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ld_shlibs=yes
-    fi
-    ;;
-
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
-    ;;
-
-  unixware7*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    ;;
-  esac
-fi
-echo "$ac_t$ld_shlibs" 1>&6
-test "$ld_shlibs" = no && can_build_shared=no
-
-if test -z "$NM"; then
-  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
-  case "$NM" in
-  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
-  *)
-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
-    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
-      test -z "$ac_dir" && ac_dir=.
-      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	  NM="$ac_dir/nm -B"
-	  break
-	elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	  NM="$ac_dir/nm -p"
-	  break
-	else
-	  NM=${NM="$ac_dir/nm"} # keep the first match, but
-	  continue # so that we can try to find one that supports BSD flags
-	fi
-      fi
-    done
-    IFS="$ac_save_ifs"
-    test -z "$NM" && NM=nm
-    ;;
-  esac
-  echo "$ac_t$NM" 1>&6
-fi
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  symcode='[ABCDGISTW]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  symcode='[BDT]'
-  ;;
-sysv4)
-  symcode='[DFNSTU]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-  global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode\)[ 	][ 	]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-  $rm conftest*
-  cat > conftest.c <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  echo "$progname:1635: checking if global_symbol_pipe works" >&5
-  if { (eval echo $progname:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { echo "$progname:1639: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
-	  cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$objext conftstm.$objext
-	  save_LIBS="$LIBS"
-	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo $progname:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    pipe_works=yes
-	  else
-	    echo "$progname: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$save_LIBS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  $rm conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    global_symbol_pipe=
-  fi
-done
-if test "$pipe_works" = yes; then
-  echo "${ac_t}ok" 1>&6
-else
-  echo "${ac_t}failed" 1>&6
-fi
-
-if test -z "$global_symbol_pipe"; then
-  global_symbol_to_cdecl=
-fi
-
-# Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$hardcode_shlibpath_var" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-echo "$ac_t$hardcode_action" 1>&6
-
-
-reload_flag=
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
-# PORTME Some linkers may need a different reload flag.
-reload_flag='-r'
-echo "$ac_t$reload_flag" 1>&6
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-# PORTME Fill in your ld.so characteristics
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-file_magic_cmd=
-file_magic_test_file=
-deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-case "$host_os" in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4*)
-  version_type=linux
-  # AIX has no versioning support, so currently we can not hardcode correct
-  # soname into executable. Probably we can add versioning support to
-  # collect2, so additional links can be useful in future.
-  # We preserve .a as extension for shared libraries though AIX4.2
-  # and later linker supports .so
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
-  shlibpath_var=LIBPATH
-  deplibs_check_method=pass_all
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  deplibs_check_method=pass_all
-  lt_cv_dlopen="load_add_on"
-  lt_cv_dlopen_libs=
-  lt_cv_dlopen_self=yes
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  file_magic_cmd=/usr/bin/file
-  file_magic_test_file=/shlib/libc.so
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  export_dynamic_flag_spec=-rdynamic
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  if test "$with_gcc" = yes; then
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
-  else
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
-  fi
-  dynamic_linker='Win32 ld.exe'
-  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  file_magic_cmd='${OBJDUMP} -f'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  lt_cv_dlopen="LoadLibrary"
-  lt_cv_dlopen_libs=
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-  
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case "$version_type" in
-    freebsd-elf*)
-      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
-      file_magic_cmd=/usr/bin/file
-      file_magic_test_file=`echo /usr/lib/libc.so*`
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      deplibs_check_method=unknown
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case "$host_os" in
-  freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  *) # from 3.2 on
-    shlibpath_overrides_runpath=no
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  dynamic_linker="$host_os dld.sl"
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  shlibpath_var=SHLIB_PATH
-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-  soname_spec='${libname}${release}.sl$major'
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6*)
-  version_type=irix
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so.$major'
-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
-  case "$host_os" in
-  irix5*)
-    libsuff= shlibsuff=
-    # this will be overridden with pass_all, but let us keep it just in case
-    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case "$LD" in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  file_magic_cmd=/usr/bin/file
-  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  deplibs_check_method='pass_all'
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-  file_magic_cmd=/usr/bin/file
-  file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-
-  if test -f /lib/ld.so.1; then
-    dynamic_linker='GNU ld.so'
-  else
-    # Only the GNU ld.so supports shared libraries on MkLinux.
-    case "$host_cpu" in
-    powerpc*) dynamic_linker=no ;;
-    *) dynamic_linker='Linux ld.so' ;;
-    esac
-  fi
-  ;;
-
-netbsd*)
-  version_type=sunos
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-openbsd*)
-  version_type=sunos
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-    need_version=no
-  fi
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_version=no
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  # this will be overridden with pass_all, but let us keep it just in case
-  deplibs_check_method='file_magic COFF format alpha shared library'
-  file_magic_cmd=/usr/bin/file
-  file_magic_test_file=/shlib/libc.so
-  deplibs_check_method='pass_all'
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
-  file_magic_cmd=/usr/bin/file
-  file_magic_test_file=/lib/libc.so
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case "$host_vendor" in
-    ncr)
-      deplibs_check_method='pass_all'
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-      file_magic_cmd=/usr/bin/file
-      file_magic_test_file=`echo /usr/lib/libc.so*`
-      ;;
-  esac
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-echo "$ac_t$dynamic_linker" 1>&6
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
-
-# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
-# configure.in, otherwise build static only libraries.
-case "$host_os" in
-cygwin* | mingw* | os2*)
-  if test x$can_build_shared = xyes; then
-    test x$enable_win32_dll = xno && can_build_shared=no
-    echo "checking if package supports dlls... $can_build_shared" 1>&6
-  fi
-;;
-esac
-
-if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
-  case "$deplibs_check_method" in
-  "file_magic "*)
-    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-       egrep "$file_magic_regex" > /dev/null; then
-      :
-    else
-      cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@xxxxxxx
-
-EOF
-    fi ;;
-  esac
-fi
-
-echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  test "$enable_shared" = yes && enable_static=no
-  ;;
-esac
-
-echo "$ac_t$enable_shared" 1>&6
-
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-
-echo "checking whether to build static libraries... $enable_static" 1>&6
-
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-echo $ac_n "checking for objdir... $ac_c" 1>&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-echo "$ac_t$objdir" 1>&6
-
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
-  lt_cv_dlopen=no lt_cv_dlopen_libs=
-echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:2212: checking for dlopen in -ldl" >&5
-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-ldl  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2220 "ltconfig"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo $progname:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:2252: checking for dlopen" >&5
-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2257 "ltconfig"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
-choke me
-#else
-dlopen();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo $progname:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_dlopen=yes"
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_dlopen=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="dlopen"
-else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:2299: checking for dld_link in -ldld" >&5
-ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-ldld  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2307 "ltconfig"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link();
-
-int main() {
-dld_link()
-; return 0; }
-EOF
-if { (eval echo $progname:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:2339: checking for shl_load" >&5
-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2344 "ltconfig"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
-choke me
-#else
-shl_load();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo $progname:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_shl_load=yes"
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_shl_load=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="shl_load"
-else
-  echo "$ac_t""no" 1>&6
-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "$progname:2387: checking for shl_load in -ldld" >&5
-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_save_LIBS="$LIBS"
-LIBS="-ldld  $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2395 "ltconfig"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load();
-
-int main() {
-shl_load()
-; return 0; }
-EOF
-if { (eval echo $progname:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=yes"
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-fi
-
-    
-fi
-
-  
-fi
-
-
-fi
-
-fi
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  fi
-
-  case "$lt_cv_dlopen" in
-  dlopen)
-for ac_hdr in dlfcn.h; do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:2452: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2457 "ltconfig"
-#include <$ac_hdr>
-int fnord = 0;
-EOF
-ac_try="$ac_compile >/dev/null 2>conftest.out"
-{ (eval echo $progname:2462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-    if test "x$ac_cv_header_dlfcn_h" = xyes; then
-      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-    fi
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2490: checking whether a program can dlopen itself" >&5
-if test "${lt_cv_dlopen_self+set}" = set; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    lt_cv_dlopen_self=cross
-  else
-    cat > conftest.c <<EOF
-#line 2498 "ltconfig"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL	RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-#  define LTDL_GLOBAL	DL_GLOBAL
-# else
-#  define LTDL_GLOBAL	0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
-# else
-#  ifdef DL_LAZY
-#   define LTDL_LAZY_OR_NOW	DL_LAZY
-#  else
-#   ifdef RTLD_NOW
-#    define LTDL_LAZY_OR_NOW	RTLD_NOW
-#   else
-#    ifdef DL_NOW
-#     define LTDL_LAZY_OR_NOW	DL_NOW
-#    else
-#     define LTDL_LAZY_OR_NOW	0
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-fnord() { int i=42;}
-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
-    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
-	       if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
-
-EOF
-if { (eval echo $progname:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  lt_cv_dlopen_self=yes
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  lt_cv_dlopen_self=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
-
-  if test "$lt_cv_dlopen_self" = yes; then
-    LDFLAGS="$LDFLAGS $link_static_flag"
-  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2563: checking whether a statically linked program can dlopen itself" >&5
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    lt_cv_dlopen_self_static=cross
-  else
-    cat > conftest.c <<EOF
-#line 2571 "ltconfig"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL	RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-#  define LTDL_GLOBAL	DL_GLOBAL
-# else
-#  define LTDL_GLOBAL	0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
-# else
-#  ifdef DL_LAZY
-#   define LTDL_LAZY_OR_NOW	DL_LAZY
-#  else
-#   ifdef RTLD_NOW
-#    define LTDL_LAZY_OR_NOW	RTLD_NOW
-#   else
-#    ifdef DL_NOW
-#     define LTDL_LAZY_OR_NOW	DL_NOW
-#    else
-#     define LTDL_LAZY_OR_NOW	0
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-fnord() { int i=42;}
-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
-    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
-    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
-
-EOF
-if { (eval echo $progname:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  lt_cv_dlopen_self_static=yes
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  lt_cv_dlopen_self_static=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
-fi
-    ;;
-  esac
-
-  case "$lt_cv_dlopen_self" in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case "$lt_cv_dlopen_self_static" in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-
-# Copy echo and quote the copy, instead of the original, because it is
-# used later.
-ltecho="$echo"
-if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
-fi
-LTSHELL="$SHELL"
-
-LTCONFIG_VERSION="$VERSION"
-
-# Only quote variables if we're using ltmain.sh.
-case "$ltmain" in
-*.sh)
-  # Now quote all the things that may contain metacharacters.
-  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
-    old_LD old_LDFLAGS old_LIBS \
-    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
-    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
-    reload_flag reload_cmds wl \
-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-    library_names_spec soname_spec \
-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
-    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-
-    case "$var" in
-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case "$ltecho" in
-  *'\$0 --fallback-echo"')
-    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-  trap "$rm \"$ofile\"; exit 1" 1 2 15
-  echo "creating $ofile"
-  $rm "$ofile"
-  cat <<EOF > "$ofile"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
-#
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@xxxxxxxxxxxxxx>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-### BEGIN LIBTOOL CONFIG
-EOF
-  cfgfile="$ofile"
-  ;;
-
-*)
-  # Double-quote the variables that need it (for aesthetics).
-  for var in old_CC old_CFLAGS old_CPPFLAGS \
-    old_LD old_LDFLAGS old_LIBS \
-    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
-    eval "$var=\\\"\$var\\\""
-  done
-
-  # Just create a config file.
-  cfgfile="$ofile.cfg"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  echo "creating $cfgfile"
-  $rm "$cfgfile"
-  cat <<EOF > "$cfgfile"
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-EOF
-  ;;
-esac
-
-cat <<EOF >> "$cfgfile"
-# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
-# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
-# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
-# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
-#   $0$ltconfig_args
-#
-# Compiler and other test output produced by $progname, useful for
-# debugging $progname, is in ./config.log if it exists.
-
-# The version of $progname that generated this script.
-LTCONFIG_VERSION=$LTCONFIG_VERSION
-
-# Shell to use when invoking shell scripts.
-SHELL=$LTSHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$ltecho
-
-# The archiver.
-AR=$AR
-
-# The default C compiler.
-CC=$CC
-
-# The linker used to build libraries.
-LD=$LD
-
-# Whether we need hard or soft links.
-LN_S=$LN_S
-
-# A BSD-compatible nm program.
-NM=$NM
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$reload_flag
-reload_cmds=$reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$wl
-
-# Object file suffix (normally "o").
-objext="$objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$pic_flag
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$compiler_c_o
-
-# Can we write directly to a .lo ?
-compiler_o_lo=$compiler_o_lo
-
-# Must we lock files when doing compilation ?
-need_locks=$need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$link_static_flag
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$RANLIB
-old_archive_cmds=$old_archive_cmds
-old_postinstall_cmds=$old_postinstall_cmds
-old_postuninstall_cmds=$old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$old_archive_from_new_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$archive_cmds
-archive_expsym_cmds=$archive_expsym_cmds
-postinstall_cmds=$postinstall_cmds
-postuninstall_cmds=$postuninstall_cmds
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$global_symbol_to_cdecl
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$include_expsyms
-
-EOF
-
-case "$ltmain" in
-*.sh)
-  echo '### END LIBTOOL CONFIG' >> "$ofile"
-  echo >> "$ofile"
-  case "$host_os" in
-  aix3*)
-    cat <<\EOF >> "$ofile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  # Append the ltmain.sh script.
-  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-
-  chmod +x "$ofile"
-  ;;
-
-*)
-  # Compile the libtool program.
-  echo "FIXME: would compile $ltmain"
-  ;;
-esac
-
-test -n "$cache_file" || exit 0
-
-# AC_CACHE_SAVE
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/external/privoxy/pcre/ltmain.sh b/external/privoxy/pcre/ltmain.sh
deleted file mode 100644
index ab65054..0000000
--- a/external/privoxy/pcre/ltmain.sh
+++ /dev/null
@@ -1,4012 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-#
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@xxxxxxxxxxxxxx>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.3.4
-TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
-  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-# Parse our command line options once, thoroughly.
-while test $# -gt 0
-do
-  arg="$1"
-  shift
-
-  case "$arg" in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case "$prev" in
-    execute_dlfiles)
-      eval "$prev=\"\$$prev \$arg\""
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case "$arg" in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    exit 0
-    ;;
-
-  --config)
-    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
-    exit 0
-    ;;
-
-  --debug)
-    echo "$progname: enabling shell trace mode"
-    set -x
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-    exit 0
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --quiet | --silent)
-    show=:
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-fi
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    case "$nonopt" in
-    *cc | *++ | gcc* | *-gcc*)
-      mode=link
-      for arg
-      do
-	case "$arg" in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case "$mode" in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    lastarg=
-    srcfile="$nonopt"
-    suppress_output=
-
-    user_target=no
-    for arg
-    do
-      # Accept any command-line options.
-      case "$arg" in
-      -o)
-	if test "$user_target" != "no"; then
-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	  exit 1
-	fi
-	user_target=next
-	;;
-
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-      esac
-
-      case "$user_target" in
-      next)
-	# The next one is the -o target name
-	user_target=yes
-	continue
-	;;
-      yes)
-	# We got the output file
-	user_target=set
-	libobj="$arg"
-	continue
-	;;
-      esac
-
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
-
-      # Aesthetically quote the previous argument.
-
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly in scan
-      # sets, so we specify it separately.
-      case "$lastarg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
-
-    case "$user_target" in
-    set)
-      ;;
-    no)
-      # Get the name of the library object.
-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    *)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSfmso]'
-    case "$libobj" in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case "$libobj" in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $libobj"
-    else
-      removelist="$libobj"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
-    else
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until ln "$0" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-      echo $srcfile > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      # All platforms use -DPIC, to notify preprocessed assembler code.
-      command="$base_compile $srcfile $pic_flag -DPIC"
-      if test "$build_old_libs" = yes; then
-	lo_libobj="$libobj"
-	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$dir" = "X$libobj"; then
-	  dir="$objdir"
-	else
-	  dir="$dir/$objdir"
-	fi
-	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-
-	if test -d "$dir"; then
-	  $show "$rm $libobj"
-	  $run $rm $libobj
-	else
-	  $show "$mkdir $dir"
-	  $run $mkdir $dir
-	  status=$?
-	  if test $status -ne 0 && test ! -d $dir; then
-	    exit $status
-	  fi
-	fi
-      fi
-      if test "$compiler_o_lo" = yes; then
-	output_obj="$libobj"
-	command="$command -o $output_obj"
-      elif test "$compiler_c_o" = yes; then
-	output_obj="$obj"
-	command="$command -o $output_obj"
-      fi
-
-      $run $rm "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test x"$output_obj" != x"$libobj"; then
-	$show "$mv $output_obj $libobj"
-	if $run $mv $output_obj $libobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # If we have no pic_flag, then copy the object into place and finish.
-      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
-	# Rename the .lo from within objdir to obj
-	if test -f $obj; then
-	  $show $rm $obj
-	  $run $rm $obj
-	fi
-
-	$show "$mv $libobj $obj"
-	if $run $mv $libobj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-
-	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$obj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
-	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	# Now arrange that obj and lo_libobj become the same file
-	$show "(cd $xdir && $LN_S $baseobj $libobj)"
-	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-	  exit 0
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      command="$base_compile $srcfile"
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-	output_obj="$obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed
-      if test x"$output_obj" != x"$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Create an invalid libtool object if no PIC, so that we do not
-      # accidentally link it into a program.
-      if test "$build_libtool_libs" != yes; then
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > \$libobj" || exit $?
-      else
-	# Move the .lo from within objdir
-	$show "$mv $libobj $lo_libobj"
-	if $run $mv $libobj $lo_libobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-    fi
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $rm "$lockfile"
-    fi
-
-    exit 0
-    ;;
-
-  # libtool link mode
-  link)
-    modename="$modename: link"
-    case "$host" in
-    *-*-cygwin* | *-*-mingw* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invokation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-      # This is a source program that is used to create import libraries
-      # on Windows for dlls which lack them. Don't remove nor modify the
-      # starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999 Free Software Foundation, Inc.
-# 
-#  This file is part of GNU libtool.
-# 
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-# 
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-# 
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-# 
-#  #include <stdio.h>		/* for printf() */
-#  #include <unistd.h>		/* for open(), lseek(), read() */
-#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-#  #include <string.h>		/* for strdup() */
-# 
-#  static unsigned int
-#  pe_get16 (fd, offset)
-#       int fd;
-#       int offset;
-#  {
-#    unsigned char b[2];
-#    lseek (fd, offset, SEEK_SET);
-#    read (fd, b, 2);
-#    return b[0] + (b[1]<<8);
-#  }
-# 
-#  static unsigned int
-#  pe_get32 (fd, offset)
-#      int fd;
-#      int offset;
-#  {
-#    unsigned char b[4];
-#    lseek (fd, offset, SEEK_SET);
-#    read (fd, b, 4);
-#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-#  }
-# 
-#  static unsigned int
-#  pe_as32 (ptr)
-#       void *ptr;
-#  {
-#    unsigned char *b = ptr;
-#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-#  }
-# 
-#  int
-#  main (argc, argv)
-#      int argc;
-#      char *argv[];
-#  {
-#      int dll;
-#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#      unsigned long export_rva, export_size, nsections, secptr, expptr;
-#      unsigned long name_rvas, nexp;
-#      unsigned char *expdata, *erva;
-#      char *filename, *dll_name;
-# 
-#      filename = argv[1];
-# 
-#      dll = open(filename, O_RDONLY|O_BINARY);
-#      if (!dll)
-#  	return 1;
-# 
-#      dll_name = filename;
-#    
-#      for (i=0; filename[i]; i++)
-#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-#  	    dll_name = filename + i +1;
-# 
-#      pe_header_offset = pe_get32 (dll, 0x3c);
-#      opthdr_ofs = pe_header_offset + 4 + 20;
-#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
-# 
-#      if (num_entries < 1) /* no exports */
-#  	return 1;
-# 
-#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#      export_size = pe_get32 (dll, opthdr_ofs + 100);
-#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#      secptr = (pe_header_offset + 4 + 20 +
-#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
-# 
-#      expptr = 0;
-#      for (i = 0; i < nsections; i++)
-#      {
-#  	char sname[8];
-#  	unsigned long secptr1 = secptr + 40 * i;
-#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-#  	lseek(dll, secptr1, SEEK_SET);
-#  	read(dll, sname, 8);
-#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-#  	{
-#  	    expptr = fptr + (export_rva - vaddr);
-#  	    if (export_rva + export_size > vaddr + vsize)
-#  		export_size = vsize - (export_rva - vaddr);
-#  	    break;
-#  	}
-#      }
-# 
-#      expdata = (unsigned char*)malloc(export_size);
-#      lseek (dll, expptr, SEEK_SET);
-#      read (dll, expdata, export_size);
-#      erva = expdata - export_rva;
-# 
-#      nexp = pe_as32 (expdata+24);
-#      name_rvas = pe_as32 (expdata+32);
-# 
-#      printf ("EXPORTS\n");
-#      for (i = 0; i<nexp; i++)
-#      {
-#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#      }
-# 
-#      return 0;
-#  }
-# /* impgen.c ends here */
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    linkopts=
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      lib_search_path=
-    fi
-    # now prepend the system-specific ones
-    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-    
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    link_against_libtool_libs=
-    ltlibs=
-    module=no
-    objs=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case "$arg" in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	else
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	fi
-	build_libtool_libs=no
-	build_old_libs=yes
-	prefer_static_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test $# -gt 0; do
-      arg="$1"
-      shift
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case "$prev" in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case "$prev" in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case "$arg" in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case "$arg" in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi
-
-      prevarg="$arg"
-
-      case "$arg" in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: not more than one -exported-symbols argument allowed"
-	  exit 1
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case "$dir" in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    absdir="$dir"
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case " $deplibs " in
-	*" $arg "*) ;;
-	*) deplibs="$deplibs $arg";;
-	esac
-	case " $lib_search_path " in
-	*" $dir "*) ;;
-	*) lib_search_path="$lib_search_path $dir";;
-	esac
-	case "$host" in
-	*-*-cygwin* | *-*-mingw* | *-*-os2*)
-	  dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-	  case ":$dllsearchpath:" in
-	  ::) dllsearchpath="$dllsearchdir";;
-	  *":$dllsearchdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
-	  esac
-	  ;;
-	esac
-	;;
-
-      -l*)
-	if test "$arg" = "-lc"; then
-	  case "$host" in
-	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-	    # These systems don't actually have c library (as such)
-	    continue
-	    ;;
-	  esac
-	elif test "$arg" = "-lm"; then
-	  case "$host" in
-	  *-*-cygwin* | *-*-beos*)
-	    # These systems don't actually have math library (as such)
-	    continue
-	    ;;
-	  esac
-	fi
-	deplibs="$deplibs $arg"
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case "$dir" in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static)
-	# If we have no pic_flag, then this is the same as -all-static.
-	if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-
-      *.o | *.obj | *.a | *.lib)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A library object.
-	if test "$prev" = dlfiles; then
-	  dlfiles="$dlfiles $arg"
-	  if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
-	    prev=
-	    continue
-	  else
-	    # If libtool objects are unsupported, then we need to preload.
-	    prev=dlprefiles
-	  fi
-	fi
-
-	if test "$prev" = dlprefiles; then
-	  # Preload the old-style object.
-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-	  prev=
-	fi
-	libobjs="$libobjs $arg"
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	dlname=
-	libdir=
-	library_names=
-	old_library=
-
-	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
-	  exit 1
-	fi
-
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variable installed.
-	installed=yes
-
-	# Read the .la file
-	# If there is no directory component, then add one.
-	case "$arg" in
-	*/* | *\\*) . $arg ;;
-	*) . ./$arg ;;
-	esac
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
-	  exit 1
-	fi
-
-	# Find the relevant object directory and library name.
-	name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
-
-	if test "X$installed" = Xyes; then
-	  dir="$libdir"
-	else
-	  dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$dir" = "X$arg"; then
-	    dir="$objdir"
-	  else
-	    dir="$dir/$objdir"
-	  fi
-	fi
-
-	if test -n "$dependency_libs"; then
-	  # Extract -R and -L from dependency_libs
-	  temp_deplibs=
-	  for deplib in $dependency_libs; do
-	    case "$deplib" in
-	    -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-		 case " $rpath $xrpath " in
-		 *" $temp_xrpath "*) ;;
-		 *) xrpath="$xrpath $temp_xrpath";;
-		 esac;;
-	    -L*) case "$compile_command $temp_deplibs " in
-		 *" $deplib "*) ;;
-		 *) temp_deplibs="$temp_deplibs $deplib";;
-		 esac
-		 temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-		 case " $lib_search_path " in
-		 *" $temp_dir "*) ;;
-		 *) lib_search_path="$lib_search_path $temp_dir";;
-		 esac
-		 ;;
-	    *) temp_deplibs="$temp_deplibs $deplib";;
-	    esac
-	  done
-	  dependency_libs="$temp_deplibs"
-	fi
-
-	if test -z "$libdir"; then
-	  # It is a libtool convenience library, so add in its objects.
-	  convenience="$convenience $dir/$old_library"
-	  old_convenience="$old_convenience $dir/$old_library"
-	  deplibs="$deplibs$dependency_libs"
-	  compile_command="$compile_command $dir/$old_library$dependency_libs"
-	  finalize_command="$finalize_command $dir/$old_library$dependency_libs"
-	  continue
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$prev" = dlfiles; then
-	  dlfiles="$dlfiles $arg"
-	  if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking statically,
-	    # we need to preload.
-	    prev=dlprefiles
-	  else
-	    # We should not create a dependency on this library, but we
-	    # may need any libraries it requires.
-	    compile_command="$compile_command$dependency_libs"
-	    finalize_command="$finalize_command$dependency_libs"
-	    prev=
-	    continue
-	  fi
-	fi
-
-	# The library was specified with -dlpreopen.
-	if test "$prev" = dlprefiles; then
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    dlprefiles="$dlprefiles $dir/$old_library"
-	  else
-	    dlprefiles="$dlprefiles $dir/$linklib"
-	  fi
-	  prev=
-	fi
-
-	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  link_against_libtool_libs="$link_against_libtool_libs $arg"
-	  if test -n "$shlibpath_var"; then
-	    # Make sure the rpath contains only unique directories.
-	    case "$temp_rpath " in
-	    *" $dir "*) ;;
-	    *) temp_rpath="$temp_rpath $dir" ;;
-	    esac
-	  fi
-
-	  # We need an absolute path.
-	  case "$dir" in
-	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-	  *)
-	    absdir=`cd "$dir" && pwd`
-	    if test -z "$absdir"; then
-	      $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-	      $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	      absdir="$dir"
-	    fi
-	    ;;
-	  esac
-	  
-	  # This is the magic to use -rpath.
-	  # Skip directories that are in the system default run-time
-	  # search path, unless they have been requested with -R.
-	  case " $sys_lib_dlsearch_path " in
-	  *" $absdir "*) ;;
-	  *)
-	    case "$compile_rpath " in
-	    *" $absdir "*) ;;
-	    *) compile_rpath="$compile_rpath $absdir" 
-	    esac
-	    ;;
-	  esac
-
-	  case " $sys_lib_dlsearch_path " in
-	  *" $libdir "*) ;;
-	  *)
-	    case "$finalize_rpath " in
-	    *" $libdir "*) ;;
-	    *) finalize_rpath="$finalize_rpath $libdir"
-	    esac
-	    ;;
-	  esac
-
-	  lib_linked=yes
-	  case "$hardcode_action" in
-	  immediate | unsupported)
-	    if test "$hardcode_direct" = no; then
-	      compile_command="$compile_command $dir/$linklib"
-	      deplibs="$deplibs $dir/$linklib"
-	      case "$host" in
-	      *-*-cygwin* | *-*-mingw* | *-*-os2*)
-		dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
-		if test -n "$dllsearchpath"; then
-		  dllsearchpath="$dllsearchpath:$dllsearchdir"
-		else
-		  dllsearchpath="$dllsearchdir"
-		fi
-		;;
-	      esac
-	    elif test "$hardcode_minus_L" = no; then
-	      case "$host" in
-	      *-*-sunos*)
-		compile_shlibpath="$compile_shlibpath$dir:"
-		;;
-	      esac
-	      case "$compile_command " in
-	      *" -L$dir "*) ;;
-	      *) compile_command="$compile_command -L$dir";;
-	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -L$dir -l$name"
-	    elif test "$hardcode_shlibpath_var" = no; then
-	      case ":$compile_shlibpath:" in
-	      *":$dir:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$dir:";;
-	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -l$name"
-	    else
-	      lib_linked=no
-	    fi
-	    ;;
-
-	  relink)
-	    if test "$hardcode_direct" = yes; then
-	      compile_command="$compile_command $absdir/$linklib"
-	      deplibs="$deplibs $absdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      case "$compile_command " in
-	      *" -L$absdir "*) ;;
-	      *) compile_command="$compile_command -L$absdir";;
-	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -L$absdir -l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case ":$compile_shlibpath:" in
-	      *":$absdir:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$absdir:";;
-	      esac
-	      compile_command="$compile_command -l$name"
-	      deplibs="$deplibs -l$name"
-	    else
-	      lib_linked=no
-	    fi
-	    ;;
-
-	  *)
-	    lib_linked=no
-	    ;;
-	  esac
-
-	  if test "$lib_linked" != yes; then
-	    $echo "$modename: configuration error: unsupported hardcode properties"
-	    exit 1
-	  fi
-
-	  # Finalize command for both is simple: just hardcode it.
-	  if test "$hardcode_direct" = yes; then
-	    finalize_command="$finalize_command $libdir/$linklib"
-	  elif test "$hardcode_minus_L" = yes; then
-	    case "$finalize_command " in
-	    *" -L$libdir "*) ;;
-	    *) finalize_command="$finalize_command -L$libdir";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  elif test "$hardcode_shlibpath_var" = yes; then
-	    case ":$finalize_shlibpath:" in
-	    *":$libdir:"*) ;;
-	    *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  else
-	    # We cannot seem to hardcode it, guess we'll fake it.
-	    case "$finalize_command " in
-	    *" -L$dir "*) ;;
-	    *) finalize_command="$finalize_command -L$libdir";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  fi
-	else
-	  # Transform directly to old archives if we don't build new libraries.
-	  if test -n "$pic_flag" && test -z "$old_library"; then
-	    $echo "$modename: cannot find static library for \`$arg'" 1>&2
-	    exit 1
-	  fi
-
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_command="$compile_command $dir/$linklib"
-	    finalize_command="$finalize_command $dir/$linklib"
-	  else
-	    case "$compile_command " in
-	    *" -L$dir "*) ;;
-	    *) compile_command="$compile_command -L$dir";;
-	    esac
-	    compile_command="$compile_command -l$name"
-	    case "$finalize_command " in
-	    *" -L$dir "*) ;;
-	    *) finalize_command="$finalize_command -L$dir";;
-	    esac
-	    finalize_command="$finalize_command -l$name"
-	  fi
-	fi
-
-	# Add in any libraries that this one depends upon.
-	compile_command="$compile_command$dependency_libs"
-	finalize_command="$finalize_command$dependency_libs"
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-      esac
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    case "$output" in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-      ;;
-
-    *.a | *.lib)
-      if test -n "$link_against_libtool_libs"; then
-	$echo "$modename: error: cannot link libtool libraries into archives" 1>&2
-	exit 1
-      fi
-
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      ;;
-
-    *.la)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case "$outputname" in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$output_objdir" = "X$output"; then
-	output_objdir="$objdir"
-      else
-	output_objdir="$output_objdir/$objdir"
-      fi
-
-      if test -n "$objs"; then
-	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
-	exit 1
-      fi
-
-      # How the heck are we supposed to write a wrapper for a shared library?
-      if test -n "$link_against_libtool_libs"; then
-	 $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
-	 exit 1
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test $# -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  libext=al
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-	dependency_libs="$deplibs"
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	current="$2"
-	revision="$3"
-	age="$4"
-
-	# Check that each of the things are valid numbers.
-	case "$current" in
-	0 | [1-9] | [1-9][0-9]*) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case "$revision" in
-	0 | [1-9] | [1-9][0-9]*) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case "$age" in
-	0 | [1-9] | [1-9][0-9]*) ;;
-	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	if test $age -gt $current; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case "$version_type" in
-	none) ;;
-
-	irix)
-	  major=`expr $current - $age + 1`
-	  versuffix="$major.$revision"
-	  verstring="sgi$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test $loop != 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="sgi$major.$iface:$verstring"
-	  done
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test $loop != 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	windows)
-	  # Like Linux, but with '-' rather than '.', since we only
-	  # want one extension on Windows 95.
-	  major=`expr $current - $age`
-	  versuffix="-$major-$age-$revision"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  verstring="0.0"
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-	
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-
-	dependency_libs="$deplibs"
-	case "$host" in
-	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
-	  # these systems don't actually have a c library (as such)!
-	  ;;
-	*)
-	  # Add libc to deplibs on all other systems.
-	  deplibs="$deplibs -lc"
-	  ;;
-	esac
-      fi
-
-      # Create the output directory, or remove our outputs if we need to.
-      if test -d $output_objdir; then
-	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
-      else
-	$show "$mkdir $output_objdir"
-	$run $mkdir $output_objdir
-	status=$?
-	if test $status -ne 0 && test ! -d $output_objdir; then
-	  exit $status
-	fi
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      if test "$build_libtool_libs" = yes; then
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case "$deplibs_check_method" in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behaviour.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  $CC -o conftest conftest.c $deplibs
-	  if test $? -eq 0 ; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	      # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		set dummy $deplib_matches
-		deplib_match=$2
-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		  newdeplibs="$newdeplibs $i"
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning: This library needs some functionality provided by $i."
-		  echo "*** I have the capability to make that library automatically link in when"
-		  echo "*** you link to this library.  But I can only do this if you have a"
-		  echo "*** shared version of the library, which you do not appear to have."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occured in the first compile.  Let's try to salvage the situation:
-	    # Compile a seperate program for each library.
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	     # If $name is empty we are operating on a -L argument.
-	      if test "$name" != "" ; then
-		$rm conftest
-		$CC -o conftest conftest.c $i
-		# Did it work?
-		if test $? -eq 0 ; then
-		  ldd_output=`ldd conftest`
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    echo "*** Warning: This library needs some functionality provided by $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which you do not appear to have."
-		  fi
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "***  make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-	    if test "$name" != "" ; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path; do
-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		    for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue 
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
-			case "$potliblink" in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | sed 10q \
-			 | egrep "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		    done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have."
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
-	     grep . >/dev/null; then
-	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-      
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	# Get the real and link names of the library.
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-
-	lib="$output_objdir/$realname"
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Ensure that we have .o objects for linkers which dislike .lo
-	# (e.g. aix) in case we are running --disable-static
-	for obj in $libobjs; do
-	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$obj"; then
-	    xdir="."
-	  else
-	    xdir="$xdir"
-	  fi
-	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	  if test ! -f $xdir/$oldobj; then
-	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-	  fi
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd" || exit $?
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "mkdir $gentop"
-	    $run mkdir "$gentop"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
-	    generated="$generated $gentop"
-
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case "$xlib" in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "mkdir $xdir"
-	      $run mkdir "$xdir"
-	      status=$?
-	      if test $status -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	    done
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linkopts="$linkopts $flag"
-	fi
-
-	# Do each of the archive commands.
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
-	else
-	  eval cmds=\"$archive_cmds\"
-	fi
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    *.lo | *.o | *.obj)
-      if test -n "$link_against_libtool_libs"; then
-	$echo "$modename: error: cannot link libtool libraries into objects" 1>&2
-	exit 1
-      fi
-
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case "$output" in
-      *.lo)
-	if test -n "$objs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl= 
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-	else
-	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "mkdir $gentop"
-	  $run mkdir "$gentop"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
-	  generated="$generated $gentop"
-
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case "$xlib" in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "mkdir $xdir"
-	    $run mkdir "$xdir"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	  done
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
-
-      output="$obj"
-      eval cmds=\"$reload_cmds\"
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit 0
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > $libobj" || exit $?
-	exit 0
-      fi
-
-      if test -n "$pic_flag"; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	eval cmds=\"$reload_cmds\"
-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      else
-	# Just create a symlink.
-	$show $rm $libobj
-	$run $rm $libobj
-	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$libobj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
-	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit 0
-      ;;
-
-    # Anything else should be a program.
-    *)
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi 
-      fi
-    
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$compile_rpath " in
-	  *" $libdir "*) ;;
-	  *) compile_rpath="$compile_rpath $libdir" ;;
-	  esac
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$output_objdir" = "X$output"; then
-	output_objdir="$objdir"
-      else
-	output_objdir="$output_objdir/$objdir"
-      fi
-
-      # Create the binary in the object directory, then wrap it.
-      if test ! -d $output_objdir; then
-	$show "$mkdir $output_objdir"
-	$run $mkdir $output_objdir
-	status=$?
-	if test $status -ne 0 && test ! -d $output_objdir; then
-	  exit $status
-	fi
-      fi
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case "$dlsyms" in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-	    
-	    if test -n "$export_symbols_regex"; then
-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
-	      $run $rm $export_symbols
-	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	    else
-	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`echo "$arg" | sed -e 's%^.*/%%'`
-	    $run eval 'echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
-		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
-		  < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr_t) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case "$host" in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	status=$?
-	
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case "$dir" in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-	
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-      
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case "$0" in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  link_against_libtool_libs='$link_against_libtool_libs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  echo >> $output "\
-  program=lt-'$outputname'
-  progdir=\"\$thisdir/$objdir\"
-  
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if (cd \"\$thisdir\" && eval \$relink_command); then :
-      else
-	$rm \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	*-*-cygwin* | *-*-mingw | *-*-os2*)
-	  # win32 systems need to use the prog path for dll
-	  # lookup to work
-	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
-	  ;;
-	*)
-	  $echo >> $output "\
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit 0
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "mkdir $gentop"
-	$run mkdir "$gentop"
-	status=$?
-	if test $status -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
-	generated="$generated $gentop"
-	  
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case "$xlib" in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "mkdir $xdir"
-	  $run mkdir "$xdir"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
-      else
-	# Ensure that we have .o objects in place in case we decided
-	# not to build a shared library, and have fallen back to building
-	# static libs even though --disable-static was passed!
-	for oldobj in $oldobjs; do
-	  if test ! -f $oldobj; then
-	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$oldobj"; then
-	      xdir="."
-	    else
-	      xdir="$xdir"
-	    fi
-	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
-	  fi
-	done
-
-	eval cmds=\"$old_archive_cmds\"
-      fi
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case "$output" in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      if test -n "$xrpath"; then
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	done
-	dependency_libs="$temp_xrpath $dependency_libs"
-      fi
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	  fi
-	  $rm $output
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$dlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'\
-"
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
-      ;;
-    esac
-    exit 0
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg="$nonopt"
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case "$arg" in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest="$arg"
-	continue
-      fi
-
-      case "$arg" in
-      -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*) ;;
-
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest="$arg"
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test $# -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-    fi
-    case "$destdir" in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case "$file" in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case "$file" in
-      *.a | *.lib)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	library_names=
-	old_library=
-	# If there is no directory component, then add one.
-	case "$file" in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$realname $destdir/$realname"
-	  $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
-
-	  if test $# -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
-	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case "$destfile" in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.o | *.obj)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit 0
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Do a test to see if this is really a libtool program.
-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  link_against_libtool_libs=
-	  relink_command=
-
-	  # If there is no directory component, then add one.
-	  case "$file" in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$link_against_libtool_libs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-	    exit 1
-	  fi
-
-	  finalize=yes
-	  for lib in $link_against_libtool_libs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case "$lib" in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-	      else
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec $SHELL $0 --finish$current_libdirs
-      exit 1
-    fi
-
-    exit 0
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
-	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit 0
-
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      echo "   $libdir"
-    done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "----------------------------------------------------------------------"
-    exit 0
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit 1
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-
-      dir=
-      case "$file" in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case "$file" in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case "$file" in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case "$file" in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-        # Export the shlibpath_var.
-        eval "export $shlibpath_var"
-      fi
-
-      # Restore saved enviroment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
-
-      # Now actually exec the command.
-      eval "exec \$cmd$args"
-
-      $echo "$modename: cannot exec \$cmd$args"
-      exit 1
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-        $echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit 0
-    fi
-    ;;
-
-  # libtool uninstall mode
-  uninstall)
-    modename="$modename: uninstall"
-    rm="$nonopt"
-    files=
-
-    for arg
-    do
-      case "$arg" in
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$dir" = "X$file" && dir=.
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      rmfiles="$file"
-
-      case "$name" in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $dir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-
-	  $show "$rm $rmfiles"
-	  $run $rm $rmfiles
-
-	  if test -n "$library_names"; then
-	    # Do each command in the postuninstall commands.
-	    eval cmds=\"$postuninstall_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd"
-	    done
-	    IFS="$save_ifs"
-	  fi
-
-	  if test -n "$old_library"; then
-	    # Do each command in the old_postuninstall commands.
-	    eval cmds=\"$old_postuninstall_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd"
-	    done
-	    IFS="$save_ifs"
-	  fi
-
-	  # FIXME: should reinstall the best remaining shared library.
-	fi
-	;;
-
-      *.lo)
-	if test "$build_old_libs" = yes; then
-	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-	  rmfiles="$rmfiles $dir/$oldobj"
-	fi
-	$show "$rm $rmfiles"
-	$run $rm $rmfiles
-	;;
-
-      *)
-	$show "$rm $rmfiles"
-	$run $rm $rmfiles
-	;;
-      esac
-    done
-    exit 0
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-    ;;
-  esac
-
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$generic_help" 1>&2
-  exit 1
-fi # test -z "$show_help"
-
-# We need to display help for each of the modes.
-case "$mode" in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --version         print version information
-
-MODE must be one of the following:
-
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-  ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/external/privoxy/pcre/maketables.c b/external/privoxy/pcre/maketables.c
deleted file mode 100644
index c0f06c0..0000000
--- a/external/privoxy/pcre/maketables.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/*
-PCRE is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-
-See the file Tech.Notes for some information on the internals.
-*/
-
-
-/* This file is compiled on its own as part of the PCRE library. However,
-it is also included in the compilation of dftables.c, in which case the macro
-DFTABLES is defined. */
-
-#ifndef DFTABLES
-#include "internal.h"
-#endif
-
-
-
-/*************************************************
-*           Create PCRE character tables         *
-*************************************************/
-
-/* This function builds a set of character tables for use by PCRE and returns
-a pointer to them. They are build using the ctype functions, and consequently
-their contents will depend upon the current locale setting. When compiled as
-part of the library, the store is obtained via pcre_malloc(), but when compiled
-inside dftables, use malloc().
-
-Arguments:   none
-Returns:     pointer to the contiguous block of data
-*/
-
-unsigned const char *
-pcre_maketables(void)
-{
-unsigned char *yield, *p;
-int i;
-
-#ifndef DFTABLES
-yield = (unsigned char*)(pcre_malloc)(tables_length);
-#else
-yield = (unsigned char*)malloc(tables_length);
-#endif
-
-if (yield == NULL) return NULL;
-p = yield;
-
-/* First comes the lower casing table */
-
-for (i = 0; i < 256; i++) *p++ = tolower(i);
-
-/* Next the case-flipping table */
-
-for (i = 0; i < 256; i++) *p++ = islower(i)? toupper(i) : tolower(i);
-
-/* Then the character class tables. Don't try to be clever and save effort
-on exclusive ones - in some locales things may be different. */
-
-memset(p, 0, cbit_length);
-for (i = 0; i < 256; i++)
-  {
-  if (isdigit(i))
-    {
-    p[cbit_digit  + i/8] |= 1 << (i&7);
-    p[cbit_word   + i/8] |= 1 << (i&7);
-    }
-  if (isupper(i))
-    {
-    p[cbit_upper  + i/8] |= 1 << (i&7);
-    p[cbit_word   + i/8] |= 1 << (i&7);
-    }
-  if (islower(i))
-    {
-    p[cbit_lower  + i/8] |= 1 << (i&7);
-    p[cbit_word   + i/8] |= 1 << (i&7);
-    }
-  if (i == '_')   p[cbit_word   + i/8] |= 1 << (i&7);
-  if (isspace(i)) p[cbit_space  + i/8] |= 1 << (i&7);
-  if (isxdigit(i))p[cbit_xdigit + i/8] |= 1 << (i&7);
-  if (isgraph(i)) p[cbit_graph  + i/8] |= 1 << (i&7);
-  if (isprint(i)) p[cbit_print  + i/8] |= 1 << (i&7);
-  if (ispunct(i)) p[cbit_punct  + i/8] |= 1 << (i&7);
-  if (iscntrl(i)) p[cbit_cntrl  + i/8] |= 1 << (i&7);
-  }
-p += cbit_length;
-
-/* Finally, the character type table */
-
-for (i = 0; i < 256; i++)
-  {
-  int x = 0;
-  if (isspace(i)) x += ctype_space;
-  if (isalpha(i)) x += ctype_letter;
-  if (isdigit(i)) x += ctype_digit;
-  if (isxdigit(i)) x += ctype_xdigit;
-  if (isalnum(i) || i == '_') x += ctype_word;
-  if (strchr("*+?{^.$|()[", i) != 0) x += ctype_meta;
-  *p++ = x;
-  }
-
-return yield;
-}
-
-/* End of maketables.c */
diff --git a/external/privoxy/pcre/pcre-config b/external/privoxy/pcre/pcre-config
deleted file mode 100755
index ac9ccfe..0000000
--- a/external/privoxy/pcre/pcre-config
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/sh
-
-prefix=/usr/local
-exec_prefix=${prefix}
-exec_prefix_set=no
-
-usage="\
-Usage: pcre-config [--prefix] [--exec-prefix] [--version] [--libs] [--libs-posix] [--cflags] [--cflags-posix]"
-
-if test $# -eq 0; then
-      echo "${usage}" 1>&2
-      exit 1
-fi
-
-while test $# -gt 0; do
-  case "$1" in
-  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  case $1 in
-    --prefix=*)
-      prefix=$optarg
-      if test $exec_prefix_set = no ; then
-        exec_prefix=$optarg
-      fi
-      ;;
-    --prefix)
-      echo $prefix
-      ;;
-    --exec-prefix=*)
-      exec_prefix=$optarg
-      exec_prefix_set=yes
-      ;;
-    --exec-prefix)
-      echo $exec_prefix
-      ;;
-    --version)
-      echo 3.4
-      ;;
-    --cflags | --cflags-posix)
-      if test ${prefix}/include != /usr/include ; then
-        includes=-I${prefix}/include
-      fi
-      echo $includes
-      ;;
-    --libs-posix)
-      echo -L${exec_prefix}/lib -lpcreposix -lpcre
-      ;;
-    --libs)
-      echo -L${exec_prefix}/lib -lpcre
-      ;;
-    *)
-      echo "${usage}" 1>&2
-      exit 1
-      ;;
-  esac
-  shift
-done
diff --git a/external/privoxy/pcre/pcre-config.in b/external/privoxy/pcre/pcre-config.in
deleted file mode 100644
index 8daded9..0000000
--- a/external/privoxy/pcre/pcre-config.in
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/sh
-
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-exec_prefix_set=no
-
-usage="\
-Usage: pcre-config [--prefix] [--exec-prefix] [--version] [--libs] [--libs-posix] [--cflags] [--cflags-posix]"
-
-if test $# -eq 0; then
-      echo "${usage}" 1>&2
-      exit 1
-fi
-
-while test $# -gt 0; do
-  case "$1" in
-  -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  case $1 in
-    --prefix=*)
-      prefix=$optarg
-      if test $exec_prefix_set = no ; then
-        exec_prefix=$optarg
-      fi
-      ;;
-    --prefix)
-      echo $prefix
-      ;;
-    --exec-prefix=*)
-      exec_prefix=$optarg
-      exec_prefix_set=yes
-      ;;
-    --exec-prefix)
-      echo $exec_prefix
-      ;;
-    --version)
-      echo @PCRE_VERSION@
-      ;;
-    --cflags | --cflags-posix)
-      if test @includedir@ != /usr/include ; then
-        includes=-I@includedir@
-      fi
-      echo $includes
-      ;;
-    --libs-posix)
-      echo -L@libdir@ -lpcreposix -lpcre
-      ;;
-    --libs)
-      echo -L@libdir@ -lpcre
-      ;;
-    *)
-      echo "${usage}" 1>&2
-      exit 1
-      ;;
-  esac
-  shift
-done
diff --git a/external/privoxy/pcre/pcre.c b/external/privoxy/pcre/pcre.c
deleted file mode 100644
index 5149f8d..0000000
--- a/external/privoxy/pcre/pcre.c
+++ /dev/null
@@ -1,5151 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/*
-This is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language. See
-the file Tech.Notes for some information on the internals.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-*/
-
-
-/* Define DEBUG to get debugging output on stdout. */
-
-/* #define DEBUG */
-
-/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
-inline, and there are *still* stupid compilers about that don't like indented
-pre-processor statements. I suppose it's only been 10 years... */
-
-#ifdef DEBUG
-#define DPRINTF(p) printf p
-#else
-#define DPRINTF(p) /*nothing*/
-#endif
-
-/* Include the internals header, which itself includes Standard C headers plus
-the external pcre header. */
-
-#include "internal.h"
-
-
-/* Allow compilation as C++ source code, should anybody want to do that. */
-
-#ifdef __cplusplus
-#define class pcre_class
-#endif
-
-
-/* Number of items on the nested bracket stacks at compile time. This should
-not be set greater than 200. */
-
-#define BRASTACK_SIZE 200
-
-
-/* The number of bytes in a literal character string above which we can't add
-any more is different when UTF-8 characters may be encountered. */
-
-#ifdef SUPPORT_UTF8
-#define MAXLIT 250
-#else
-#define MAXLIT 255
-#endif
-
-
-/* Min and max values for the common repeats; for the maxima, 0 => infinity */
-
-static const char rep_min[] = { 0, 0, 1, 1, 0, 0 };
-static const char rep_max[] = { 0, 0, 0, 0, 1, 1 };
-
-/* Text forms of OP_ values and things, for debugging (not all used) */
-
-#ifdef DEBUG
-static const char *OP_names[] = {
-  "End", "\\A", "\\B", "\\b", "\\D", "\\d",
-  "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z",
-  "Opt", "^", "$", "Any", "chars", "not",
-  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
-  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
-  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
-  "*", "*?", "+", "+?", "?", "??", "{", "{",
-  "class", "Ref", "Recurse",
-  "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",
-  "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref",
-  "Brazero", "Braminzero", "Bra"
-};
-#endif
-
-/* Table for handling escaped characters in the range '0'-'z'. Positive returns
-are simple data values; negative values are for special things like \d and so
-on. Zero means further processing is needed (for things like \x), or the escape
-is invalid. */
-
-static const short int escapes[] = {
-    0,      0,      0,      0,      0,      0,      0,      0,   /* 0 - 7 */
-    0,      0,    ':',    ';',    '<',    '=',    '>',    '?',   /* 8 - ? */
-  '@', -ESC_A, -ESC_B,      0, -ESC_D,      0,      0,      0,   /* @ - G */
-    0,      0,      0,      0,      0,      0,      0,      0,   /* H - O */
-    0,      0,      0, -ESC_S,      0,      0,      0, -ESC_W,   /* P - W */
-    0,      0, -ESC_Z,    '[',   '\\',    ']',    '^',    '_',   /* X - _ */
-  '`',      7, -ESC_b,      0, -ESC_d,     27,   '\f',      0,   /* ` - g */
-    0,      0,      0,      0,      0,      0,   '\n',      0,   /* h - o */
-    0,      0,   '\r', -ESC_s,   '\t',      0,      0, -ESC_w,   /* p - w */
-    0,      0, -ESC_z                                            /* x - z */
-};
-
-/* Tables of names of POSIX character classes and their lengths. The list is
-terminated by a zero length entry. The first three must be alpha, upper, lower,
-as this is assumed for handling case independence. */
-
-static const char *posix_names[] = {
-  "alpha", "lower", "upper",
-  "alnum", "ascii", "cntrl", "digit", "graph",
-  "print", "punct", "space", "word",  "xdigit" };
-
-static const uschar posix_name_lengths[] = {
-  5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 };
-
-/* Table of class bit maps for each POSIX class; up to three may be combined
-to form the class. */
-
-static const int posix_class_maps[] = {
-  cbit_lower, cbit_upper, -1,             /* alpha */
-  cbit_lower, -1,         -1,             /* lower */
-  cbit_upper, -1,         -1,             /* upper */
-  cbit_digit, cbit_lower, cbit_upper,     /* alnum */
-  cbit_print, cbit_cntrl, -1,             /* ascii */
-  cbit_cntrl, -1,         -1,             /* cntrl */
-  cbit_digit, -1,         -1,             /* digit */
-  cbit_graph, -1,         -1,             /* graph */
-  cbit_print, -1,         -1,             /* print */
-  cbit_punct, -1,         -1,             /* punct */
-  cbit_space, -1,         -1,             /* space */
-  cbit_word,  -1,         -1,             /* word */
-  cbit_xdigit,-1,         -1              /* xdigit */
-};
-
-
-/* Definition to allow mutual recursion */
-
-static BOOL
-  compile_regex(int, int, int *, uschar **, const uschar **, const char **,
-    BOOL, int, int *, int *, compile_data *);
-
-/* Structure for building a chain of data that actually lives on the
-stack, for holding the values of the subject pointer at the start of each
-subpattern, so as to detect when an empty string has been matched by a
-subpattern - to break infinite loops. */
-
-typedef struct eptrblock {
-  struct eptrblock *prev;
-  const uschar *saved_eptr;
-} eptrblock;
-
-/* Flag bits for the match() function */
-
-#define match_condassert   0x01    /* Called to check a condition assertion */
-#define match_isgroup      0x02    /* Set if start of bracketed group */
-
-
-
-/*************************************************
-*               Global variables                 *
-*************************************************/
-
-/* PCRE is thread-clean and doesn't use any global variables in the normal
-sense. However, it calls memory allocation and free functions via the two
-indirections below, which are can be changed by the caller, but are shared
-between all threads. */
-
-void *(*pcre_malloc)(size_t) = malloc;
-void  (*pcre_free)(void *) = free;
-
-
-
-/*************************************************
-*    Macros and tables for character handling    *
-*************************************************/
-
-/* When UTF-8 encoding is being used, a character is no longer just a single
-byte. The macros for character handling generate simple sequences when used in
-byte-mode, and more complicated ones for UTF-8 characters. */
-
-#ifndef SUPPORT_UTF8
-#define GETCHARINC(c, eptr) c = *eptr++;
-#define GETCHARLEN(c, eptr, len) c = *eptr;
-#define BACKCHAR(eptr)
-
-#else   /* SUPPORT_UTF8 */
-
-/* Get the next UTF-8 character, advancing the pointer */
-
-#define GETCHARINC(c, eptr) \
-  c = *eptr++; \
-  if (md->utf8 && (c & 0xc0) == 0xc0) \
-    { \
-    int a = utf8_table4[c & 0x3f];  /* Number of additional bytes */ \
-    int s = 6 - a;                  /* Amount to shift next byte */  \
-    c &= utf8_table3[a];            /* Low order bits from first byte */ \
-    while (a-- > 0) \
-      { \
-      c |= (*eptr++ & 0x3f) << s; \
-      s += 6; \
-      } \
-    }
-
-/* Get the next UTF-8 character, not advancing the pointer, setting length */
-
-#define GETCHARLEN(c, eptr, len) \
-  c = *eptr; \
-  len = 1; \
-  if (md->utf8 && (c & 0xc0) == 0xc0) \
-    { \
-    int i; \
-    int a = utf8_table4[c & 0x3f];  /* Number of additional bytes */ \
-    int s = 6 - a;                  /* Amount to shift next byte */  \
-    c &= utf8_table3[a];            /* Low order bits from first byte */ \
-    for (i = 1; i <= a; i++) \
-      { \
-      c |= (eptr[i] & 0x3f) << s; \
-      s += 6; \
-      } \
-    len += a; \
-    }
-
-/* If the pointer is not at the start of a character, move it back until
-it is. */
-
-#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--;
-
-#endif
-
-
-
-/*************************************************
-*             Default character tables           *
-*************************************************/
-
-/* A default set of character tables is included in the PCRE binary. Its source
-is built by the maketables auxiliary program, which uses the default C ctypes
-functions, and put in the file chartables.c. These tables are used by PCRE
-whenever the caller of pcre_compile() does not provide an alternate set of
-tables. */
-
-#include "chartables.c"
-
-
-
-#ifdef SUPPORT_UTF8
-/*************************************************
-*           Tables for UTF-8 support             *
-*************************************************/
-
-/* These are the breakpoints for different numbers of bytes in a UTF-8
-character. */
-
-static int utf8_table1[] = { 0x7f, 0x7ff, 0xffff, 0x1fffff, 0x3ffffff, 0x7fffffff};
-
-/* These are the indicator bits and the mask for the data bits to set in the
-first byte of a character, indexed by the number of additional bytes. */
-
-static int utf8_table2[] = { 0,    0xc0, 0xe0, 0xf0, 0xf8, 0xfc};
-static int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};
-
-/* Table of the number of extra characters, indexed by the first character
-masked with 0x3f. The highest number for a valid UTF-8 character is in fact
-0x3d. */
-
-static uschar utf8_table4[] = {
-  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
-  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
-  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
-  3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 };
-
-
-/*************************************************
-*       Convert character value to UTF-8         *
-*************************************************/
-
-/* This function takes an integer value in the range 0 - 0x7fffffff
-and encodes it as a UTF-8 character in 0 to 6 bytes.
-
-Arguments:
-  cvalue     the character value
-  buffer     pointer to buffer for result - at least 6 bytes long
-
-Returns:     number of characters placed in the buffer
-*/
-
-static int
-ord2utf8(int cvalue, uschar *buffer)
-{
-register int i, j;
-for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)
-  if (cvalue <= utf8_table1[i]) break;
-*buffer++ = utf8_table2[i] | (cvalue & utf8_table3[i]);
-cvalue >>= 6 - i;
-for (j = 0; j < i; j++)
-  {
-  *buffer++ = 0x80 | (cvalue & 0x3f);
-  cvalue >>= 6;
-  }
-return i + 1;
-}
-#endif
-
-
-
-/*************************************************
-*          Return version string                 *
-*************************************************/
-
-#define STRING(a)  # a
-#define XSTRING(s) STRING(s)
-
-const char *
-pcre_version(void)
-{
-return XSTRING(PCRE_MAJOR) "." XSTRING(PCRE_MINOR) " " XSTRING(PCRE_DATE);
-}
-
-
-
-
-/*************************************************
-* (Obsolete) Return info about compiled pattern  *
-*************************************************/
-
-/* This is the original "info" function. It picks potentially useful data out
-of the private structure, but its interface was too rigid. It remains for
-backwards compatibility. The public options are passed back in an int - though
-the re->options field has been expanded to a long int, all the public options
-at the low end of it, and so even on 16-bit systems this will still be OK.
-Therefore, I haven't changed the API for pcre_info().
-
-Arguments:
-  external_re   points to compiled code
-  optptr        where to pass back the options
-  first_char    where to pass back the first character,
-                or -1 if multiline and all branches start ^,
-                or -2 otherwise
-
-Returns:        number of capturing subpatterns
-                or negative values on error
-*/
-
-int
-pcre_info(const pcre *external_re, int *optptr, int *first_char)
-{
-const real_pcre *re = (const real_pcre *)external_re;
-if (re == NULL) return PCRE_ERROR_NULL;
-if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC;
-if (optptr != NULL) *optptr = (int)(re->options & PUBLIC_OPTIONS);
-if (first_char != NULL)
-  *first_char = ((re->options & PCRE_FIRSTSET) != 0)? re->first_char :
-     ((re->options & PCRE_STARTLINE) != 0)? -1 : -2;
-return re->top_bracket;
-}
-
-
-
-/*************************************************
-*        Return info about compiled pattern      *
-*************************************************/
-
-/* This is a newer "info" function which has an extensible interface so
-that additional items can be added compatibly.
-
-Arguments:
-  external_re      points to compiled code
-  external_study   points to study data, or NULL
-  what             what information is required
-  where            where to put the information
-
-Returns:           0 if data returned, negative on error
-*/
-
-int
-pcre_fullinfo(const pcre *external_re, const pcre_extra *study_data, int what,
-  void *where)
-{
-const real_pcre *re = (const real_pcre *)external_re;
-const real_pcre_extra *study = (const real_pcre_extra *)study_data;
-
-if (re == NULL || where == NULL) return PCRE_ERROR_NULL;
-if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC;
-
-switch (what)
-  {
-  case PCRE_INFO_OPTIONS:
-  *((unsigned long int *)where) = re->options & PUBLIC_OPTIONS;
-  break;
-
-  case PCRE_INFO_SIZE:
-  *((size_t *)where) = re->size;
-  break;
-
-  case PCRE_INFO_CAPTURECOUNT:
-  *((int *)where) = re->top_bracket;
-  break;
-
-  case PCRE_INFO_BACKREFMAX:
-  *((int *)where) = re->top_backref;
-  break;
-
-  case PCRE_INFO_FIRSTCHAR:
-  *((int *)where) =
-    ((re->options & PCRE_FIRSTSET) != 0)? re->first_char :
-    ((re->options & PCRE_STARTLINE) != 0)? -1 : -2;
-  break;
-
-  case PCRE_INFO_FIRSTTABLE:
-  *((const uschar **)where) =
-    (study != NULL && (study->options & PCRE_STUDY_MAPPED) != 0)?
-      study->start_bits : NULL;
-  break;
-
-  case PCRE_INFO_LASTLITERAL:
-  *((int *)where) =
-    ((re->options & PCRE_REQCHSET) != 0)? re->req_char : -1;
-  break;
-
-  default: return PCRE_ERROR_BADOPTION;
-  }
-
-return 0;
-}
-
-
-
-#ifdef DEBUG
-/*************************************************
-*        Debugging function to print chars       *
-*************************************************/
-
-/* Print a sequence of chars in printable format, stopping at the end of the
-subject if the requested.
-
-Arguments:
-  p           points to characters
-  length      number to print
-  is_subject  TRUE if printing from within md->start_subject
-  md          pointer to matching data block, if is_subject is TRUE
-
-Returns:     nothing
-*/
-
-static void
-pchars(const uschar *p, int length, BOOL is_subject, match_data *md)
-{
-int c;
-if (is_subject && length > md->end_subject - p) length = md->end_subject - p;
-while (length-- > 0)
-  if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c);
-}
-#endif
-
-
-
-
-/*************************************************
-*            Handle escapes                      *
-*************************************************/
-
-/* This function is called when a \ has been encountered. It either returns a
-positive value for a simple escape such as \n, or a negative value which
-encodes one of the more complicated things such as \d. When UTF-8 is enabled,
-a positive value greater than 255 may be returned. On entry, ptr is pointing at
-the \. On exit, it is on the final character of the escape sequence.
-
-Arguments:
-  ptrptr     points to the pattern position pointer
-  errorptr   points to the pointer to the error message
-  bracount   number of previous extracting brackets
-  options    the options bits
-  isclass    TRUE if inside a character class
-  cd         pointer to char tables block
-
-Returns:     zero or positive => a data character
-             negative => a special escape sequence
-             on error, errorptr is set
-*/
-
-static int
-check_escape(const uschar **ptrptr, const char **errorptr, int bracount,
-  int options, BOOL isclass, compile_data *cd)
-{
-const uschar *ptr = *ptrptr;
-int c, i;
-
-/* If backslash is at the end of the pattern, it's an error. */
-
-c = *(++ptr);
-if (c == 0) *errorptr = ERR1;
-
-/* Digits or letters may have special meaning; all others are literals. */
-
-else if (c < '0' || c > 'z') {}
-
-/* Do an initial lookup in a table. A non-zero result is something that can be
-returned immediately. Otherwise further processing may be required. */
-
-else if ((i = escapes[c - '0']) != 0) c = i;
-
-/* Escapes that need further processing, or are illegal. */
-
-else
-  {
-  const uschar *oldptr;
-  switch (c)
-    {
-    /* The handling of escape sequences consisting of a string of digits
-    starting with one that is not zero is not straightforward. By experiment,
-    the way Perl works seems to be as follows:
-
-    Outside a character class, the digits are read as a decimal number. If the
-    number is less than 10, or if there are that many previous extracting
-    left brackets, then it is a back reference. Otherwise, up to three octal
-    digits are read to form an escaped byte. Thus \123 is likely to be octal
-    123 (cf \0123, which is octal 012 followed by the literal 3). If the octal
-    value is greater than 377, the least significant 8 bits are taken. Inside a
-    character class, \ followed by a digit is always an octal number. */
-
-    case '1': case '2': case '3': case '4': case '5':
-    case '6': case '7': case '8': case '9':
-
-    if (!isclass)
-      {
-      oldptr = ptr;
-      c -= '0';
-      while ((cd->ctypes[ptr[1]] & ctype_digit) != 0)
-        c = c * 10 + *(++ptr) - '0';
-      if (c < 10 || c <= bracount)
-        {
-        c = -(ESC_REF + c);
-        break;
-        }
-      ptr = oldptr;      /* Put the pointer back and fall through */
-      }
-
-    /* Handle an octal number following \. If the first digit is 8 or 9, Perl
-    generates a binary zero byte and treats the digit as a following literal.
-    Thus we have to pull back the pointer by one. */
-
-    if ((c = *ptr) >= '8')
-      {
-      ptr--;
-      c = 0;
-      break;
-      }
-
-    /* \0 always starts an octal number, but we may drop through to here with a
-    larger first octal digit. */
-
-    case '0':
-    c -= '0';
-    while(i++ < 2 && (cd->ctypes[ptr[1]] & ctype_digit) != 0 &&
-      ptr[1] != '8' && ptr[1] != '9')
-        c = c * 8 + *(++ptr) - '0';
-    c &= 255;     /* Take least significant 8 bits */
-    break;
-
-    /* \x is complicated when UTF-8 is enabled. \x{ddd} is a character number
-    which can be greater than 0xff, but only if the ddd are hex digits. */
-
-    case 'x':
-#ifdef SUPPORT_UTF8
-    if (ptr[1] == '{' && (options & PCRE_UTF8) != 0)
-      {
-      const uschar *pt = ptr + 2;
-      register int count = 0;
-      c = 0;
-      while ((cd->ctypes[*pt] & ctype_xdigit) != 0)
-        {
-        count++;
-        c = c * 16 + cd->lcc[*pt] -
-          (((cd->ctypes[*pt] & ctype_digit) != 0)? '0' : 'W');
-        pt++;
-        }
-      if (*pt == '}')
-        {
-        if (c < 0 || count > 8) *errorptr = ERR34;
-        ptr = pt;
-        break;
-        }
-      /* If the sequence of hex digits does not end with '}', then we don't
-      recognize this construct; fall through to the normal \x handling. */
-      }
-#endif
-
-    /* Read just a single hex char */
-
-    c = 0;
-    while (i++ < 2 && (cd->ctypes[ptr[1]] & ctype_xdigit) != 0)
-      {
-      ptr++;
-      c = c * 16 + cd->lcc[*ptr] -
-        (((cd->ctypes[*ptr] & ctype_digit) != 0)? '0' : 'W');
-      }
-    break;
-
-    /* Other special escapes not starting with a digit are straightforward */
-
-    case 'c':
-    c = *(++ptr);
-    if (c == 0)
-      {
-      *errorptr = ERR2;
-      return 0;
-      }
-
-    /* A letter is upper-cased; then the 0x40 bit is flipped */
-
-    if (c >= 'a' && c <= 'z') c = cd->fcc[c];
-    c ^= 0x40;
-    break;
-
-    /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any
-    other alphameric following \ is an error if PCRE_EXTRA was set; otherwise,
-    for Perl compatibility, it is a literal. This code looks a bit odd, but
-    there used to be some cases other than the default, and there may be again
-    in future, so I haven't "optimized" it. */
-
-    default:
-    if ((options & PCRE_EXTRA) != 0) switch(c)
-      {
-      default:
-      *errorptr = ERR3;
-      break;
-      }
-    break;
-    }
-  }
-
-*ptrptr = ptr;
-return c;
-}
-
-
-
-/*************************************************
-*            Check for counted repeat            *
-*************************************************/
-
-/* This function is called when a '{' is encountered in a place where it might
-start a quantifier. It looks ahead to see if it really is a quantifier or not.
-It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd}
-where the ddds are digits.
-
-Arguments:
-  p         pointer to the first char after '{'
-  cd        pointer to char tables block
-
-Returns:    TRUE or FALSE
-*/
-
-static BOOL
-is_counted_repeat(const uschar *p, compile_data *cd)
-{
-if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE;
-while ((cd->ctypes[*p] & ctype_digit) != 0) p++;
-if (*p == '}') return TRUE;
-
-if (*p++ != ',') return FALSE;
-if (*p == '}') return TRUE;
-
-if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE;
-while ((cd->ctypes[*p] & ctype_digit) != 0) p++;
-return (*p == '}');
-}
-
-
-
-/*************************************************
-*         Read repeat counts                     *
-*************************************************/
-
-/* Read an item of the form {n,m} and return the values. This is called only
-after is_counted_repeat() has confirmed that a repeat-count quantifier exists,
-so the syntax is guaranteed to be correct, but we need to check the values.
-
-Arguments:
-  p          pointer to first char after '{'
-  minp       pointer to int for min
-  maxp       pointer to int for max
-             returned as -1 if no max
-  errorptr   points to pointer to error message
-  cd         pointer to character tables clock
-
-Returns:     pointer to '}' on success;
-             current ptr on error, with errorptr set
-*/
-
-static const uschar *
-read_repeat_counts(const uschar *p, int *minp, int *maxp,
-  const char **errorptr, compile_data *cd)
-{
-int min = 0;
-int max = -1;
-
-while ((cd->ctypes[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0';
-
-if (*p == '}') max = min; else
-  {
-  if (*(++p) != '}')
-    {
-    max = 0;
-    while((cd->ctypes[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0';
-    if (max < min)
-      {
-      *errorptr = ERR4;
-      return p;
-      }
-    }
-  }
-
-/* Do paranoid checks, then fill in the required variables, and pass back the
-pointer to the terminating '}'. */
-
-if (min > 65535 || max > 65535)
-  *errorptr = ERR5;
-else
-  {
-  *minp = min;
-  *maxp = max;
-  }
-return p;
-}
-
-
-
-/*************************************************
-*        Find the fixed length of a pattern      *
-*************************************************/
-
-/* Scan a pattern and compute the fixed length of subject that will match it,
-if the length is fixed. This is needed for dealing with backward assertions.
-
-Arguments:
-  code     points to the start of the pattern (the bracket)
-  options  the compiling options
-
-Returns:   the fixed length, or -1 if there is no fixed length
-*/
-
-static int
-find_fixedlength(uschar *code, int options)
-{
-int length = -1;
-
-register int branchlength = 0;
-register uschar *cc = code + 3;
-
-/* Scan along the opcodes for this branch. If we get to the end of the
-branch, check the length against that of the other branches. */
-
-for (;;)
-  {
-  int d;
-  register int op = *cc;
-  if (op >= OP_BRA) op = OP_BRA;
-
-  switch (op)
-    {
-    case OP_BRA:
-    case OP_ONCE:
-    case OP_COND:
-    d = find_fixedlength(cc, options);
-    if (d < 0) return -1;
-    branchlength += d;
-    do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT);
-    cc += 3;
-    break;
-
-    /* Reached end of a branch; if it's a ket it is the end of a nested
-    call. If it's ALT it is an alternation in a nested call. If it is
-    END it's the end of the outer call. All can be handled by the same code. */
-
-    case OP_ALT:
-    case OP_KET:
-    case OP_KETRMAX:
-    case OP_KETRMIN:
-    case OP_END:
-    if (length < 0) length = branchlength;
-      else if (length != branchlength) return -1;
-    if (*cc != OP_ALT) return length;
-    cc += 3;
-    branchlength = 0;
-    break;
-
-    /* Skip over assertive subpatterns */
-
-    case OP_ASSERT:
-    case OP_ASSERT_NOT:
-    case OP_ASSERTBACK:
-    case OP_ASSERTBACK_NOT:
-    do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT);
-    cc += 3;
-    break;
-
-    /* Skip over things that don't match chars */
-
-    case OP_REVERSE:
-    cc++;
-    /* Fall through */
-
-    case OP_CREF:
-    case OP_OPT:
-    cc++;
-    /* Fall through */
-
-    case OP_SOD:
-    case OP_EOD:
-    case OP_EODN:
-    case OP_CIRC:
-    case OP_DOLL:
-    case OP_NOT_WORD_BOUNDARY:
-    case OP_WORD_BOUNDARY:
-    cc++;
-    break;
-
-    /* Handle char strings. In UTF-8 mode we must count characters, not bytes.
-    This requires a scan of the string, unfortunately. We assume valid UTF-8
-    strings, so all we do is reduce the length by one for byte whose bits are
-    10xxxxxx. */
-
-    case OP_CHARS:
-    branchlength += *(++cc);
-#ifdef SUPPORT_UTF8
-    for (d = 1; d <= *cc; d++)
-      if ((cc[d] & 0xc0) == 0x80) branchlength--;
-#endif
-    cc += *cc + 1;
-    break;
-
-    /* Handle exact repetitions */
-
-    case OP_EXACT:
-    case OP_TYPEEXACT:
-    branchlength += (cc[1] << 8) + cc[2];
-    cc += 4;
-    break;
-
-    /* Handle single-char matchers */
-
-    case OP_NOT_DIGIT:
-    case OP_DIGIT:
-    case OP_NOT_WHITESPACE:
-    case OP_WHITESPACE:
-    case OP_NOT_WORDCHAR:
-    case OP_WORDCHAR:
-    case OP_ANY:
-    branchlength++;
-    cc++;
-    break;
-
-
-    /* Check a class for variable quantification */
-
-    case OP_CLASS:
-    cc += (*cc == OP_REF)? 2 : 33;
-
-    switch (*cc)
-      {
-      case OP_CRSTAR:
-      case OP_CRMINSTAR:
-      case OP_CRQUERY:
-      case OP_CRMINQUERY:
-      return -1;
-
-      case OP_CRRANGE:
-      case OP_CRMINRANGE:
-      if ((cc[1] << 8) + cc[2] != (cc[3] << 8) + cc[4]) return -1;
-      branchlength += (cc[1] << 8) + cc[2];
-      cc += 5;
-      break;
-
-      default:
-      branchlength++;
-      }
-    break;
-
-    /* Anything else is variable length */
-
-    default:
-    return -1;
-    }
-  }
-/* Control never gets here */
-}
-
-
-
-
-/*************************************************
-*           Check for POSIX class syntax         *
-*************************************************/
-
-/* This function is called when the sequence "[:" or "[." or "[=" is
-encountered in a character class. It checks whether this is followed by an
-optional ^ and then a sequence of letters, terminated by a matching ":]" or
-".]" or "=]".
-
-Argument:
-  ptr      pointer to the initial [
-  endptr   where to return the end pointer
-  cd       pointer to compile data
-
-Returns:   TRUE or FALSE
-*/
-
-static BOOL
-check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd)
-{
-int terminator;          /* Don't combine these lines; the Solaris cc */
-terminator = *(++ptr);   /* compiler warns about "non-constant" initializer. */
-if (*(++ptr) == '^') ptr++;
-while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++;
-if (*ptr == terminator && ptr[1] == ']')
-  {
-  *endptr = ptr;
-  return TRUE;
-  }
-return FALSE;
-}
-
-
-
-
-/*************************************************
-*          Check POSIX class name                *
-*************************************************/
-
-/* This function is called to check the name given in a POSIX-style class entry
-such as [:alnum:].
-
-Arguments:
-  ptr        points to the first letter
-  len        the length of the name
-
-Returns:     a value representing the name, or -1 if unknown
-*/
-
-static int
-check_posix_name(const uschar *ptr, int len)
-{
-register int yield = 0;
-while (posix_name_lengths[yield] != 0)
-  {
-  if (len == posix_name_lengths[yield] &&
-    strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield;
-  yield++;
-  }
-return -1;
-}
-
-
-
-
-/*************************************************
-*           Compile one branch                   *
-*************************************************/
-
-/* Scan the pattern, compiling it into the code vector.
-
-Arguments:
-  options      the option bits
-  brackets     points to number of brackets used
-  code         points to the pointer to the current code point
-  ptrptr       points to the current pattern pointer
-  errorptr     points to pointer to error message
-  optchanged   set to the value of the last OP_OPT item compiled
-  reqchar      set to the last literal character required, else -1
-  countlits    set to count of mandatory literal characters
-  cd           contains pointers to tables
-
-Returns:       TRUE on success
-               FALSE, with *errorptr set on error
-*/
-
-static BOOL
-compile_branch(int options, int *brackets, uschar **codeptr,
-  const uschar **ptrptr, const char **errorptr, int *optchanged,
-  int *reqchar, int *countlits, compile_data *cd)
-{
-int repeat_type, op_type;
-int repeat_min, repeat_max;
-int bravalue, length;
-int greedy_default, greedy_non_default;
-int prevreqchar;
-int condcount = 0;
-int subcountlits = 0;
-register int c;
-register uschar *code = *codeptr;
-uschar *tempcode;
-const uschar *ptr = *ptrptr;
-const uschar *tempptr;
-uschar *previous = NULL;
-uschar class[32];
-
-/* Set up the default and non-default settings for greediness */
-
-greedy_default = ((options & PCRE_UNGREEDY) != 0);
-greedy_non_default = greedy_default ^ 1;
-
-/* Initialize no required char, and count of literals */
-
-*reqchar = prevreqchar = -1;
-*countlits = 0;
-
-/* Switch on next character until the end of the branch */
-
-for (;; ptr++)
-  {
-  BOOL negate_class;
-  int class_charcount;
-  int class_lastchar;
-  int newoptions;
-  int condref;
-  int subreqchar;
-
-  c = *ptr;
-  if ((options & PCRE_EXTENDED) != 0)
-    {
-    if ((cd->ctypes[c] & ctype_space) != 0) continue;
-    if (c == '#')
-      {
-      /* The space before the ; is to avoid a warning on a silly compiler
-      on the Macintosh. */
-      while ((c = *(++ptr)) != 0 && c != '\n') ;
-      continue;
-      }
-    }
-
-  switch(c)
-    {
-    /* The branch terminates at end of string, |, or ). */
-
-    case 0:
-    case '|':
-    case ')':
-    *codeptr = code;
-    *ptrptr = ptr;
-    return TRUE;
-
-    /* Handle single-character metacharacters */
-
-    case '^':
-    previous = NULL;
-    *code++ = OP_CIRC;
-    break;
-
-    case '$':
-    previous = NULL;
-    *code++ = OP_DOLL;
-    break;
-
-    case '.':
-    previous = code;
-    *code++ = OP_ANY;
-    break;
-
-    /* Character classes. These always build a 32-byte bitmap of the permitted
-    characters, except in the special case where there is only one character.
-    For negated classes, we build the map as usual, then invert it at the end.
-    */
-
-    case '[':
-    previous = code;
-    *code++ = OP_CLASS;
-
-    /* If the first character is '^', set the negation flag and skip it. */
-
-    if ((c = *(++ptr)) == '^')
-      {
-      negate_class = TRUE;
-      c = *(++ptr);
-      }
-    else negate_class = FALSE;
-
-    /* Keep a count of chars so that we can optimize the case of just a single
-    character. */
-
-    class_charcount = 0;
-    class_lastchar = -1;
-
-    /* Initialize the 32-char bit map to all zeros. We have to build the
-    map in a temporary bit of store, in case the class contains only 1
-    character, because in that case the compiled code doesn't use the
-    bit map. */
-
-    memset(class, 0, 32 * sizeof(uschar));
-
-    /* Process characters until ] is reached. By writing this as a "do" it
-    means that an initial ] is taken as a data character. */
-
-    do
-      {
-      if (c == 0)
-        {
-        *errorptr = ERR6;
-        goto FAILED;
-        }
-
-      /* Handle POSIX class names. Perl allows a negation extension of the
-      form [:^name]. A square bracket that doesn't match the syntax is
-      treated as a literal. We also recognize the POSIX constructions
-      [.ch.] and [=ch=] ("collating elements") and fault them, as Perl
-      5.6 does. */
-
-      if (c == '[' &&
-          (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') &&
-          check_posix_syntax(ptr, &tempptr, cd))
-        {
-        BOOL local_negate = FALSE;
-        int posix_class, i;
-        register const uschar *cbits = cd->cbits;
-
-        if (ptr[1] != ':')
-          {
-          *errorptr = ERR31;
-          goto FAILED;
-          }
-
-        ptr += 2;
-        if (*ptr == '^')
-          {
-          local_negate = TRUE;
-          ptr++;
-          }
-
-        posix_class = check_posix_name(ptr, tempptr - ptr);
-        if (posix_class < 0)
-          {
-          *errorptr = ERR30;
-          goto FAILED;
-          }
-
-        /* If matching is caseless, upper and lower are converted to
-        alpha. This relies on the fact that the class table starts with
-        alpha, lower, upper as the first 3 entries. */
-
-        if ((options & PCRE_CASELESS) != 0 && posix_class <= 2)
-          posix_class = 0;
-
-        /* Or into the map we are building up to 3 of the static class
-        tables, or their negations. */
-
-        posix_class *= 3;
-        for (i = 0; i < 3; i++)
-          {
-          int taboffset = posix_class_maps[posix_class + i];
-          if (taboffset < 0) break;
-          if (local_negate)
-            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+taboffset];
-          else
-            for (c = 0; c < 32; c++) class[c] |= cbits[c+taboffset];
-          }
-
-        ptr = tempptr + 1;
-        class_charcount = 10;  /* Set > 1; assumes more than 1 per class */
-        continue;
-        }
-
-      /* Backslash may introduce a single character, or it may introduce one
-      of the specials, which just set a flag. Escaped items are checked for
-      validity in the pre-compiling pass. The sequence \b is a special case.
-      Inside a class (and only there) it is treated as backspace. Elsewhere
-      it marks a word boundary. Other escapes have preset maps ready to
-      or into the one we are building. We assume they have more than one
-      character in them, so set class_count bigger than one. */
-
-      if (c == '\\')
-        {
-        c = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd);
-        if (-c == ESC_b) c = '\b';
-        else if (c < 0)
-          {
-          register const uschar *cbits = cd->cbits;
-          class_charcount = 10;
-          switch (-c)
-            {
-            case ESC_d:
-            for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_digit];
-            continue;
-
-            case ESC_D:
-            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_digit];
-            continue;
-
-            case ESC_w:
-            for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_word];
-            continue;
-
-            case ESC_W:
-            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_word];
-            continue;
-
-            case ESC_s:
-            for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_space];
-            continue;
-
-            case ESC_S:
-            for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_space];
-            continue;
-
-            default:
-            *errorptr = ERR7;
-            goto FAILED;
-            }
-          }
-
-        /* Fall through if single character, but don't at present allow
-        chars > 255 in UTF-8 mode. */
-
-#ifdef SUPPORT_UTF8
-        if (c > 255)
-          {
-          *errorptr = ERR33;
-          goto FAILED;
-          }
-#endif
-        }
-
-      /* A single character may be followed by '-' to form a range. However,
-      Perl does not permit ']' to be the end of the range. A '-' character
-      here is treated as a literal. */
-
-      if (ptr[1] == '-' && ptr[2] != ']')
-        {
-        int d;
-        ptr += 2;
-        d = *ptr;
-
-        if (d == 0)
-          {
-          *errorptr = ERR6;
-          goto FAILED;
-          }
-
-        /* The second part of a range can be a single-character escape, but
-        not any of the other escapes. Perl 5.6 treats a hyphen as a literal
-        in such circumstances. */
-
-        if (d == '\\')
-          {
-          const uschar *oldptr = ptr;
-          d = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd);
-
-#ifdef SUPPORT_UTF8
-          if (d > 255)
-            {
-            *errorptr = ERR33;
-            goto FAILED;
-            }
-#endif
-          /* \b is backslash; any other special means the '-' was literal */
-
-          if (d < 0)
-            {
-            if (d == -ESC_b) d = '\b'; else
-              {
-              ptr = oldptr - 2;
-              goto SINGLE_CHARACTER;  /* A few lines below */
-              }
-            }
-          }
-
-        if (d < c)
-          {
-          *errorptr = ERR8;
-          goto FAILED;
-          }
-
-        for (; c <= d; c++)
-          {
-          class[c/8] |= (1 << (c&7));
-          if ((options & PCRE_CASELESS) != 0)
-            {
-            int uc = cd->fcc[c];           /* flip case */
-            class[uc/8] |= (1 << (uc&7));
-            }
-          class_charcount++;                /* in case a one-char range */
-          class_lastchar = c;
-          }
-        continue;   /* Go get the next char in the class */
-        }
-
-      /* Handle a lone single character - we can get here for a normal
-      non-escape char, or after \ that introduces a single character. */
-
-      SINGLE_CHARACTER:
-
-      class [c/8] |= (1 << (c&7));
-      if ((options & PCRE_CASELESS) != 0)
-        {
-        c = cd->fcc[c];   /* flip case */
-        class[c/8] |= (1 << (c&7));
-        }
-      class_charcount++;
-      class_lastchar = c;
-      }
-
-    /* Loop until ']' reached; the check for end of string happens inside the
-    loop. This "while" is the end of the "do" above. */
-
-    while ((c = *(++ptr)) != ']');
-
-    /* If class_charcount is 1 and class_lastchar is not negative, we saw
-    precisely one character. This doesn't need the whole 32-byte bit map.
-    We turn it into a 1-character OP_CHAR if it's positive, or OP_NOT if
-    it's negative. */
-
-    if (class_charcount == 1 && class_lastchar >= 0)
-      {
-      if (negate_class)
-        {
-        code[-1] = OP_NOT;
-        }
-      else
-        {
-        code[-1] = OP_CHARS;
-        *code++ = 1;
-        }
-      *code++ = class_lastchar;
-      }
-
-    /* Otherwise, negate the 32-byte map if necessary, and copy it into
-    the code vector. */
-
-    else
-      {
-      if (negate_class)
-        for (c = 0; c < 32; c++) code[c] = ~class[c];
-      else
-        memcpy(code, class, 32);
-      code += 32;
-      }
-    break;
-
-    /* Various kinds of repeat */
-
-    case '{':
-    if (!is_counted_repeat(ptr+1, cd)) goto NORMAL_CHAR;
-    ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorptr, cd);
-    if (*errorptr != NULL) goto FAILED;
-    goto REPEAT;
-
-    case '*':
-    repeat_min = 0;
-    repeat_max = -1;
-    goto REPEAT;
-
-    case '+':
-    repeat_min = 1;
-    repeat_max = -1;
-    goto REPEAT;
-
-    case '?':
-    repeat_min = 0;
-    repeat_max = 1;
-
-    REPEAT:
-    if (previous == NULL)
-      {
-      *errorptr = ERR9;
-      goto FAILED;
-      }
-
-    /* If the next character is '?' this is a minimizing repeat, by default,
-    but if PCRE_UNGREEDY is set, it works the other way round. Advance to the
-    next character. */
-
-    if (ptr[1] == '?')
-      { repeat_type = greedy_non_default; ptr++; }
-    else repeat_type = greedy_default;
-
-    /* If previous was a string of characters, chop off the last one and use it
-    as the subject of the repeat. If there was only one character, we can
-    abolish the previous item altogether. A repeat with a zero minimum wipes
-    out any reqchar setting, backing up to the previous value. We must also
-    adjust the countlits value. */
-
-    if (*previous == OP_CHARS)
-      {
-      int len = previous[1];
-
-      if (repeat_min == 0) *reqchar = prevreqchar;
-      *countlits += repeat_min - 1;
-
-      if (len == 1)
-        {
-        c = previous[2];
-        code = previous;
-        }
-      else
-        {
-        c = previous[len+1];
-        previous[1]--;
-        code--;
-        }
-      op_type = 0;                 /* Use single-char op codes */
-      goto OUTPUT_SINGLE_REPEAT;   /* Code shared with single character types */
-      }
-
-    /* If previous was a single negated character ([^a] or similar), we use
-    one of the special opcodes, replacing it. The code is shared with single-
-    character repeats by adding a suitable offset into repeat_type. */
-
-    else if ((int)*previous == OP_NOT)
-      {
-      op_type = OP_NOTSTAR - OP_STAR;  /* Use "not" opcodes */
-      c = previous[1];
-      code = previous;
-      goto OUTPUT_SINGLE_REPEAT;
-      }
-
-    /* If previous was a character type match (\d or similar), abolish it and
-    create a suitable repeat item. The code is shared with single-character
-    repeats by adding a suitable offset into repeat_type. */
-
-    else if ((int)*previous < OP_EODN || *previous == OP_ANY)
-      {
-      op_type = OP_TYPESTAR - OP_STAR;  /* Use type opcodes */
-      c = *previous;
-      code = previous;
-
-      OUTPUT_SINGLE_REPEAT:
-
-      /* If the maximum is zero then the minimum must also be zero; Perl allows
-      this case, so we do too - by simply omitting the item altogether. */
-
-      if (repeat_max == 0) goto END_REPEAT;
-
-      /* Combine the op_type with the repeat_type */
-
-      repeat_type += op_type;
-
-      /* A minimum of zero is handled either as the special case * or ?, or as
-      an UPTO, with the maximum given. */
-
-      if (repeat_min == 0)
-        {
-        if (repeat_max == -1) *code++ = OP_STAR + repeat_type;
-          else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type;
-        else
-          {
-          *code++ = OP_UPTO + repeat_type;
-          *code++ = repeat_max >> 8;
-          *code++ = (repeat_max & 255);
-          }
-        }
-
-      /* The case {1,} is handled as the special case + */
-
-      else if (repeat_min == 1 && repeat_max == -1)
-        *code++ = OP_PLUS + repeat_type;
-
-      /* The case {n,n} is just an EXACT, while the general case {n,m} is
-      handled as an EXACT followed by an UPTO. An EXACT of 1 is optimized. */
-
-      else
-        {
-        if (repeat_min != 1)
-          {
-          *code++ = OP_EXACT + op_type;  /* NB EXACT doesn't have repeat_type */
-          *code++ = repeat_min >> 8;
-          *code++ = (repeat_min & 255);
-          }
-
-        /* If the mininum is 1 and the previous item was a character string,
-        we either have to put back the item that got cancelled if the string
-        length was 1, or add the character back onto the end of a longer
-        string. For a character type nothing need be done; it will just get
-        put back naturally. Note that the final character is always going to
-        get added below. */
-
-        else if (*previous == OP_CHARS)
-          {
-          if (code == previous) code += 2; else previous[1]++;
-          }
-
-        /*  For a single negated character we also have to put back the
-        item that got cancelled. */
-
-        else if (*previous == OP_NOT) code++;
-
-        /* If the maximum is unlimited, insert an OP_STAR. */
-
-        if (repeat_max < 0)
-          {
-          *code++ = c;
-          *code++ = OP_STAR + repeat_type;
-          }
-
-        /* Else insert an UPTO if the max is greater than the min. */
-
-        else if (repeat_max != repeat_min)
-          {
-          *code++ = c;
-          repeat_max -= repeat_min;
-          *code++ = OP_UPTO + repeat_type;
-          *code++ = repeat_max >> 8;
-          *code++ = (repeat_max & 255);
-          }
-        }
-
-      /* The character or character type itself comes last in all cases. */
-
-      *code++ = c;
-      }
-
-    /* If previous was a character class or a back reference, we put the repeat
-    stuff after it, but just skip the item if the repeat was {0,0}. */
-
-    else if (*previous == OP_CLASS || *previous == OP_REF)
-      {
-      if (repeat_max == 0)
-        {
-        code = previous;
-        goto END_REPEAT;
-        }
-      if (repeat_min == 0 && repeat_max == -1)
-        *code++ = OP_CRSTAR + repeat_type;
-      else if (repeat_min == 1 && repeat_max == -1)
-        *code++ = OP_CRPLUS + repeat_type;
-      else if (repeat_min == 0 && repeat_max == 1)
-        *code++ = OP_CRQUERY + repeat_type;
-      else
-        {
-        *code++ = OP_CRRANGE + repeat_type;
-        *code++ = repeat_min >> 8;
-        *code++ = repeat_min & 255;
-        if (repeat_max == -1) repeat_max = 0;  /* 2-byte encoding for max */
-        *code++ = repeat_max >> 8;
-        *code++ = repeat_max & 255;
-        }
-      }
-
-    /* If previous was a bracket group, we may have to replicate it in certain
-    cases. */
-
-    else if ((int)*previous >= OP_BRA || (int)*previous == OP_ONCE ||
-             (int)*previous == OP_COND)
-      {
-      register int i;
-      int ketoffset = 0;
-      int len = code - previous;
-      uschar *bralink = NULL;
-
-      /* If the maximum repeat count is unlimited, find the end of the bracket
-      by scanning through from the start, and compute the offset back to it
-      from the current code pointer. There may be an OP_OPT setting following
-      the final KET, so we can't find the end just by going back from the code
-      pointer. */
-
-      if (repeat_max == -1)
-        {
-        register uschar *ket = previous;
-        do ket += (ket[1] << 8) + ket[2]; while (*ket != OP_KET);
-        ketoffset = code - ket;
-        }
-
-      /* The case of a zero minimum is special because of the need to stick
-      OP_BRAZERO in front of it, and because the group appears once in the
-      data, whereas in other cases it appears the minimum number of times. For
-      this reason, it is simplest to treat this case separately, as otherwise
-      the code gets far too mess. There are several special subcases when the
-      minimum is zero. */
-
-      if (repeat_min == 0)
-        {
-        /* If we set up a required char from the bracket, we must back off
-        to the previous value and reset the countlits value too. */
-
-        if (subcountlits > 0)
-          {
-          *reqchar = prevreqchar;
-          *countlits -= subcountlits;
-          }
-
-        /* If the maximum is also zero, we just omit the group from the output
-        altogether. */
-
-        if (repeat_max == 0)
-          {
-          code = previous;
-          goto END_REPEAT;
-          }
-
-        /* If the maximum is 1 or unlimited, we just have to stick in the
-        BRAZERO and do no more at this point. */
-
-        if (repeat_max <= 1)
-          {
-          memmove(previous+1, previous, len);
-          code++;
-          *previous++ = OP_BRAZERO + repeat_type;
-          }
-
-        /* If the maximum is greater than 1 and limited, we have to replicate
-        in a nested fashion, sticking OP_BRAZERO before each set of brackets.
-        The first one has to be handled carefully because it's the original
-        copy, which has to be moved up. The remainder can be handled by code
-        that is common with the non-zero minimum case below. We just have to
-        adjust the value or repeat_max, since one less copy is required. */
-
-        else
-          {
-          int offset;
-          memmove(previous+4, previous, len);
-          code += 4;
-          *previous++ = OP_BRAZERO + repeat_type;
-          *previous++ = OP_BRA;
-
-          /* We chain together the bracket offset fields that have to be
-          filled in later when the ends of the brackets are reached. */
-
-          offset = (bralink == NULL)? 0 : previous - bralink;
-          bralink = previous;
-          *previous++ = offset >> 8;
-          *previous++ = offset & 255;
-          }
-
-        repeat_max--;
-        }
-
-      /* If the minimum is greater than zero, replicate the group as many
-      times as necessary, and adjust the maximum to the number of subsequent
-      copies that we need. */
-
-      else
-        {
-        for (i = 1; i < repeat_min; i++)
-          {
-          memcpy(code, previous, len);
-          code += len;
-          }
-        if (repeat_max > 0) repeat_max -= repeat_min;
-        }
-
-      /* This code is common to both the zero and non-zero minimum cases. If
-      the maximum is limited, it replicates the group in a nested fashion,
-      remembering the bracket starts on a stack. In the case of a zero minimum,
-      the first one was set up above. In all cases the repeat_max now specifies
-      the number of additional copies needed. */
-
-      if (repeat_max >= 0)
-        {
-        for (i = repeat_max - 1; i >= 0; i--)
-          {
-          *code++ = OP_BRAZERO + repeat_type;
-
-          /* All but the final copy start a new nesting, maintaining the
-          chain of brackets outstanding. */
-
-          if (i != 0)
-            {
-            int offset;
-            *code++ = OP_BRA;
-            offset = (bralink == NULL)? 0 : code - bralink;
-            bralink = code;
-            *code++ = offset >> 8;
-            *code++ = offset & 255;
-            }
-
-          memcpy(code, previous, len);
-          code += len;
-          }
-
-        /* Now chain through the pending brackets, and fill in their length
-        fields (which are holding the chain links pro tem). */
-
-        while (bralink != NULL)
-          {
-          int oldlinkoffset;
-          int offset = code - bralink + 1;
-          uschar *bra = code - offset;
-          oldlinkoffset = (bra[1] << 8) + bra[2];
-          bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset;
-          *code++ = OP_KET;
-          *code++ = bra[1] = offset >> 8;
-          *code++ = bra[2] = (offset & 255);
-          }
-        }
-
-      /* If the maximum is unlimited, set a repeater in the final copy. We
-      can't just offset backwards from the current code point, because we
-      don't know if there's been an options resetting after the ket. The
-      correct offset was computed above. */
-
-      else code[-ketoffset] = OP_KETRMAX + repeat_type;
-      }
-
-    /* Else there's some kind of shambles */
-
-    else
-      {
-      *errorptr = ERR11;
-      goto FAILED;
-      }
-
-    /* In all case we no longer have a previous item. */
-
-    END_REPEAT:
-    previous = NULL;
-    break;
-
-
-    /* Start of nested bracket sub-expression, or comment or lookahead or
-    lookbehind or option setting or condition. First deal with special things
-    that can come after a bracket; all are introduced by ?, and the appearance
-    of any of them means that this is not a referencing group. They were
-    checked for validity in the first pass over the string, so we don't have to
-    check for syntax errors here.  */
-
-    case '(':
-    newoptions = options;
-    condref = -1;
-
-    if (*(++ptr) == '?')
-      {
-      int set, unset;
-      int *optset;
-
-      switch (*(++ptr))
-        {
-        case '#':                 /* Comment; skip to ket */
-        ptr++;
-        while (*ptr != ')') ptr++;
-        continue;
-
-        case ':':                 /* Non-extracting bracket */
-        bravalue = OP_BRA;
-        ptr++;
-        break;
-
-        case '(':
-        bravalue = OP_COND;       /* Conditional group */
-        if ((cd->ctypes[*(++ptr)] & ctype_digit) != 0)
-          {
-          condref = *ptr - '0';
-          while (*(++ptr) != ')') condref = condref*10 + *ptr - '0';
-          if (condref == 0)
-            {
-            *errorptr = ERR35;
-            goto FAILED;
-            }
-          ptr++;
-          }
-        else ptr--;
-        break;
-
-        case '=':                 /* Positive lookahead */
-        bravalue = OP_ASSERT;
-        ptr++;
-        break;
-
-        case '!':                 /* Negative lookahead */
-        bravalue = OP_ASSERT_NOT;
-        ptr++;
-        break;
-
-        case '<':                 /* Lookbehinds */
-        switch (*(++ptr))
-          {
-          case '=':               /* Positive lookbehind */
-          bravalue = OP_ASSERTBACK;
-          ptr++;
-          break;
-
-          case '!':               /* Negative lookbehind */
-          bravalue = OP_ASSERTBACK_NOT;
-          ptr++;
-          break;
-
-          default:                /* Syntax error */
-          *errorptr = ERR24;
-          goto FAILED;
-          }
-        break;
-
-        case '>':                 /* One-time brackets */
-        bravalue = OP_ONCE;
-        ptr++;
-        break;
-
-        case 'R':                 /* Pattern recursion */
-        *code++ = OP_RECURSE;
-        ptr++;
-        continue;
-
-        default:                  /* Option setting */
-        set = unset = 0;
-        optset = &set;
-
-        while (*ptr != ')' && *ptr != ':')
-          {
-          switch (*ptr++)
-            {
-            case '-': optset = &unset; break;
-
-            case 'i': *optset |= PCRE_CASELESS; break;
-            case 'm': *optset |= PCRE_MULTILINE; break;
-            case 's': *optset |= PCRE_DOTALL; break;
-            case 'x': *optset |= PCRE_EXTENDED; break;
-            case 'U': *optset |= PCRE_UNGREEDY; break;
-            case 'X': *optset |= PCRE_EXTRA; break;
-
-            default:
-            *errorptr = ERR12;
-            goto FAILED;
-            }
-          }
-
-        /* Set up the changed option bits, but don't change anything yet. */
-
-        newoptions = (options | set) & (~unset);
-
-        /* If the options ended with ')' this is not the start of a nested
-        group with option changes, so the options change at this level. At top
-        level there is nothing else to be done (the options will in fact have
-        been set from the start of compiling as a result of the first pass) but
-        at an inner level we must compile code to change the ims options if
-        necessary, and pass the new setting back so that it can be put at the
-        start of any following branches, and when this group ends, a resetting
-        item can be compiled. */
-
-        if (*ptr == ')')
-          {
-          if ((options & PCRE_INGROUP) != 0 &&
-              (options & PCRE_IMS) != (newoptions & PCRE_IMS))
-            {
-            *code++ = OP_OPT;
-            *code++ = *optchanged = newoptions & PCRE_IMS;
-            }
-          options = newoptions;  /* Change options at this level */
-          previous = NULL;       /* This item can't be repeated */
-          continue;              /* It is complete */
-          }
-
-        /* If the options ended with ':' we are heading into a nested group
-        with possible change of options. Such groups are non-capturing and are
-        not assertions of any kind. All we need to do is skip over the ':';
-        the newoptions value is handled below. */
-
-        bravalue = OP_BRA;
-        ptr++;
-        }
-      }
-
-    /* Else we have a referencing group; adjust the opcode. */
-
-    else
-      {
-      if (++(*brackets) > EXTRACT_MAX)
-        {
-        *errorptr = ERR13;
-        goto FAILED;
-        }
-      bravalue = OP_BRA + *brackets;
-      }
-
-    /* Process nested bracketed re. Assertions may not be repeated, but other
-    kinds can be. We copy code into a non-register variable in order to be able
-    to pass its address because some compilers complain otherwise. Pass in a
-    new setting for the ims options if they have changed. */
-
-    previous = (bravalue >= OP_ONCE)? code : NULL;
-    *code = bravalue;
-    tempcode = code;
-
-    if (!compile_regex(
-         options | PCRE_INGROUP,       /* Set for all nested groups */
-         ((options & PCRE_IMS) != (newoptions & PCRE_IMS))?
-           newoptions & PCRE_IMS : -1, /* Pass ims options if changed */
-         brackets,                     /* Bracket level */
-         &tempcode,                    /* Where to put code (updated) */
-         &ptr,                         /* Input pointer (updated) */
-         errorptr,                     /* Where to put an error message */
-         (bravalue == OP_ASSERTBACK ||
-          bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */
-         condref,                      /* Condition reference number */
-         &subreqchar,                  /* For possible last char */
-         &subcountlits,                /* For literal count */
-         cd))                          /* Tables block */
-      goto FAILED;
-
-    /* At the end of compiling, code is still pointing to the start of the
-    group, while tempcode has been updated to point past the end of the group
-    and any option resetting that may follow it. The pattern pointer (ptr)
-    is on the bracket. */
-
-    /* If this is a conditional bracket, check that there are no more than
-    two branches in the group. */
-
-    if (bravalue == OP_COND)
-      {
-      uschar *tc = code;
-      condcount = 0;
-
-      do {
-         condcount++;
-         tc += (tc[1] << 8) | tc[2];
-         }
-      while (*tc != OP_KET);
-
-      if (condcount > 2)
-        {
-        *errorptr = ERR27;
-        goto FAILED;
-        }
-      }
-
-    /* Handle updating of the required character. If the subpattern didn't
-    set one, leave it as it was. Otherwise, update it for normal brackets of
-    all kinds, forward assertions, and conditions with two branches. Don't
-    update the literal count for forward assertions, however. If the bracket
-    is followed by a quantifier with zero repeat, we have to back off. Hence
-    the definition of prevreqchar and subcountlits outside the main loop so
-    that they can be accessed for the back off. */
-
-    if (subreqchar > 0 &&
-         (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_ASSERT ||
-         (bravalue == OP_COND && condcount == 2)))
-      {
-      prevreqchar = *reqchar;
-      *reqchar = subreqchar;
-      if (bravalue != OP_ASSERT) *countlits += subcountlits;
-      }
-
-    /* Now update the main code pointer to the end of the group. */
-
-    code = tempcode;
-
-    /* Error if hit end of pattern */
-
-    if (*ptr != ')')
-      {
-      *errorptr = ERR14;
-      goto FAILED;
-      }
-    break;
-
-    /* Check \ for being a real metacharacter; if not, fall through and handle
-    it as a data character at the start of a string. Escape items are checked
-    for validity in the pre-compiling pass. */
-
-    case '\\':
-    tempptr = ptr;
-    c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd);
-
-    /* Handle metacharacters introduced by \. For ones like \d, the ESC_ values
-    are arranged to be the negation of the corresponding OP_values. For the
-    back references, the values are ESC_REF plus the reference number. Only
-    back references and those types that consume a character may be repeated.
-    We can test for values between ESC_b and ESC_Z for the latter; this may
-    have to change if any new ones are ever created. */
-
-    if (c < 0)
-      {
-      if (-c >= ESC_REF)
-        {
-        previous = code;
-        *code++ = OP_REF;
-        *code++ = -c - ESC_REF;
-        }
-      else
-        {
-        previous = (-c > ESC_b && -c < ESC_Z)? code : NULL;
-        *code++ = -c;
-        }
-      continue;
-      }
-
-    /* Data character: reset and fall through */
-
-    ptr = tempptr;
-    c = '\\';
-
-    /* Handle a run of data characters until a metacharacter is encountered.
-    The first character is guaranteed not to be whitespace or # when the
-    extended flag is set. */
-
-    NORMAL_CHAR:
-    default:
-    previous = code;
-    *code = OP_CHARS;
-    code += 2;
-    length = 0;
-
-    do
-      {
-      if ((options & PCRE_EXTENDED) != 0)
-        {
-        if ((cd->ctypes[c] & ctype_space) != 0) continue;
-        if (c == '#')
-          {
-          /* The space before the ; is to avoid a warning on a silly compiler
-          on the Macintosh. */
-          while ((c = *(++ptr)) != 0 && c != '\n') ;
-          if (c == 0) break;
-          continue;
-          }
-        }
-
-      /* Backslash may introduce a data char or a metacharacter. Escaped items
-      are checked for validity in the pre-compiling pass. Stop the string
-      before a metaitem. */
-
-      if (c == '\\')
-        {
-        tempptr = ptr;
-        c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd);
-        if (c < 0) { ptr = tempptr; break; }
-
-        /* If a character is > 127 in UTF-8 mode, we have to turn it into
-        two or more characters in the UTF-8 encoding. */
-
-#ifdef SUPPORT_UTF8
-        if (c > 127 && (options & PCRE_UTF8) != 0)
-          {
-          uschar buffer[8];
-          int len = ord2utf8(c, buffer);
-          for (c = 0; c < len; c++) *code++ = buffer[c];
-          length += len;
-          continue;
-          }
-#endif
-        }
-
-      /* Ordinary character or single-char escape */
-
-      *code++ = c;
-      length++;
-      }
-
-    /* This "while" is the end of the "do" above. */
-
-    while (length < MAXLIT && (cd->ctypes[c = *(++ptr)] & ctype_meta) == 0);
-
-    /* Update the last character and the count of literals */
-
-    prevreqchar = (length > 1)? code[-2] : *reqchar;
-    *reqchar = code[-1];
-    *countlits += length;
-
-    /* Compute the length and set it in the data vector, and advance to
-    the next state. */
-
-    previous[1] = length;
-    if (length < MAXLIT) ptr--;
-    break;
-    }
-  }                   /* end of big loop */
-
-/* Control never reaches here by falling through, only by a goto for all the
-error states. Pass back the position in the pattern so that it can be displayed
-to the user for diagnosing the error. */
-
-FAILED:
-*ptrptr = ptr;
-return FALSE;
-}
-
-
-
-
-/*************************************************
-*     Compile sequence of alternatives           *
-*************************************************/
-
-/* On entry, ptr is pointing past the bracket character, but on return
-it points to the closing bracket, or vertical bar, or end of string.
-The code variable is pointing at the byte into which the BRA operator has been
-stored. If the ims options are changed at the start (for a (?ims: group) or
-during any branch, we need to insert an OP_OPT item at the start of every
-following branch to ensure they get set correctly at run time, and also pass
-the new options into every subsequent branch compile.
-
-Argument:
-  options     the option bits
-  optchanged  new ims options to set as if (?ims) were at the start, or -1
-               for no change
-  brackets    -> int containing the number of extracting brackets used
-  codeptr     -> the address of the current code pointer
-  ptrptr      -> the address of the current pattern pointer
-  errorptr    -> pointer to error message
-  lookbehind  TRUE if this is a lookbehind assertion
-  condref     >= 0 for OPT_CREF setting at start of conditional group
-  reqchar     -> place to put the last required character, or a negative number
-  countlits   -> place to put the shortest literal count of any branch
-  cd          points to the data block with tables pointers
-
-Returns:      TRUE on success
-*/
-
-static BOOL
-compile_regex(int options, int optchanged, int *brackets, uschar **codeptr,
-  const uschar **ptrptr, const char **errorptr, BOOL lookbehind, int condref,
-  int *reqchar, int *countlits, compile_data *cd)
-{
-const uschar *ptr = *ptrptr;
-uschar *code = *codeptr;
-uschar *last_branch = code;
-uschar *start_bracket = code;
-uschar *reverse_count = NULL;
-int oldoptions = options & PCRE_IMS;
-int branchreqchar, branchcountlits;
-
-*reqchar = -1;
-*countlits = INT_MAX;
-code += 3;
-
-/* At the start of a reference-based conditional group, insert the reference
-number as an OP_CREF item. */
-
-if (condref >= 0)
-  {
-  *code++ = OP_CREF;
-  *code++ = condref;
-  }
-
-/* Loop for each alternative branch */
-
-for (;;)
-  {
-  int length;
-
-  /* Handle change of options */
-
-  if (optchanged >= 0)
-    {
-    *code++ = OP_OPT;
-    *code++ = optchanged;
-    options = (options & ~PCRE_IMS) | optchanged;
-    }
-
-  /* Set up dummy OP_REVERSE if lookbehind assertion */
-
-  if (lookbehind)
-    {
-    *code++ = OP_REVERSE;
-    reverse_count = code;
-    *code++ = 0;
-    *code++ = 0;
-    }
-
-  /* Now compile the branch */
-
-  if (!compile_branch(options, brackets, &code, &ptr, errorptr, &optchanged,
-      &branchreqchar, &branchcountlits, cd))
-    {
-    *ptrptr = ptr;
-    return FALSE;
-    }
-
-  /* Fill in the length of the last branch */
-
-  length = code - last_branch;
-  last_branch[1] = length >> 8;
-  last_branch[2] = length & 255;
-
-  /* Save the last required character if all branches have the same; a current
-  value of -1 means unset, while -2 means "previous branch had no last required
-  char".  */
-
-  if (*reqchar != -2)
-    {
-    if (branchreqchar >= 0)
-      {
-      if (*reqchar == -1) *reqchar = branchreqchar;
-      else if (*reqchar != branchreqchar) *reqchar = -2;
-      }
-    else *reqchar = -2;
-    }
-
-  /* Keep the shortest literal count */
-
-  if (branchcountlits < *countlits) *countlits = branchcountlits;
-  DPRINTF(("literal count = %d min=%d\n", branchcountlits, *countlits));
-
-  /* If lookbehind, check that this branch matches a fixed-length string,
-  and put the length into the OP_REVERSE item. Temporarily mark the end of
-  the branch with OP_END. */
-
-  if (lookbehind)
-    {
-    *code = OP_END;
-    length = find_fixedlength(last_branch, options);
-    DPRINTF(("fixed length = %d\n", length));
-    if (length < 0)
-      {
-      *errorptr = ERR25;
-      *ptrptr = ptr;
-      return FALSE;
-      }
-    reverse_count[0] = (length >> 8);
-    reverse_count[1] = length & 255;
-    }
-
-  /* Reached end of expression, either ')' or end of pattern. Insert a
-  terminating ket and the length of the whole bracketed item, and return,
-  leaving the pointer at the terminating char. If any of the ims options
-  were changed inside the group, compile a resetting op-code following. */
-
-  if (*ptr != '|')
-    {
-    length = code - start_bracket;
-    *code++ = OP_KET;
-    *code++ = length >> 8;
-    *code++ = length & 255;
-    if (optchanged >= 0)
-      {
-      *code++ = OP_OPT;
-      *code++ = oldoptions;
-      }
-    *codeptr = code;
-    *ptrptr = ptr;
-    return TRUE;
-    }
-
-  /* Another branch follows; insert an "or" node and advance the pointer. */
-
-  *code = OP_ALT;
-  last_branch = code;
-  code += 3;
-  ptr++;
-  }
-/* Control never reaches here */
-}
-
-
-
-
-/*************************************************
-*      Find first significant op code            *
-*************************************************/
-
-/* This is called by several functions that scan a compiled expression looking
-for a fixed first character, or an anchoring op code etc. It skips over things
-that do not influence this. For one application, a change of caseless option is
-important.
-
-Arguments:
-  code       pointer to the start of the group
-  options    pointer to external options
-  optbit     the option bit whose changing is significant, or
-             zero if none are
-  optstop    TRUE to return on option change, otherwise change the options
-               value and continue
-
-Returns:     pointer to the first significant opcode
-*/
-
-static const uschar*
-first_significant_code(const uschar *code, int *options, int optbit,
-  BOOL optstop)
-{
-for (;;)
-  {
-  switch ((int)*code)
-    {
-    case OP_OPT:
-    if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit))
-      {
-      if (optstop) return code;
-      *options = (int)code[1];
-      }
-    code += 2;
-    break;
-
-    case OP_CREF:
-    code += 2;
-    break;
-
-    case OP_WORD_BOUNDARY:
-    case OP_NOT_WORD_BOUNDARY:
-    code++;
-    break;
-
-    case OP_ASSERT_NOT:
-    case OP_ASSERTBACK:
-    case OP_ASSERTBACK_NOT:
-    do code += (code[1] << 8) + code[2]; while (*code == OP_ALT);
-    code += 3;
-    break;
-
-    default:
-    return code;
-    }
-  }
-/* Control never reaches here */
-}
-
-
-
-
-/*************************************************
-*          Check for anchored expression         *
-*************************************************/
-
-/* Try to find out if this is an anchored regular expression. Consider each
-alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket
-all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then
-it's anchored. However, if this is a multiline pattern, then only OP_SOD
-counts, since OP_CIRC can match in the middle.
-
-A branch is also implicitly anchored if it starts with .* and DOTALL is set,
-because that will try the rest of the pattern at all possible matching points,
-so there is no point trying them again.
-
-Arguments:
-  code       points to start of expression (the bracket)
-  options    points to the options setting
-
-Returns:     TRUE or FALSE
-*/
-
-static BOOL
-is_anchored(register const uschar *code, int *options)
-{
-do {
-   const uschar *scode = first_significant_code(code + 3, options,
-     PCRE_MULTILINE, FALSE);
-   register int op = *scode;
-   if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
-     { if (!is_anchored(scode, options)) return FALSE; }
-   else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) &&
-            (*options & PCRE_DOTALL) != 0)
-     { if (scode[1] != OP_ANY) return FALSE; }
-   else if (op != OP_SOD &&
-           ((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC))
-     return FALSE;
-   code += (code[1] << 8) + code[2];
-   }
-while (*code == OP_ALT);
-return TRUE;
-}
-
-
-
-/*************************************************
-*         Check for starting with ^ or .*        *
-*************************************************/
-
-/* This is called to find out if every branch starts with ^ or .* so that
-"first char" processing can be done to speed things up in multiline
-matching and for non-DOTALL patterns that start with .* (which must start at
-the beginning or after \n).
-
-Argument:  points to start of expression (the bracket)
-Returns:   TRUE or FALSE
-*/
-
-static BOOL
-is_startline(const uschar *code)
-{
-do {
-   const uschar *scode = first_significant_code(code + 3, NULL, 0, FALSE);
-   register int op = *scode;
-   if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND)
-     { if (!is_startline(scode)) return FALSE; }
-   else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR)
-     { if (scode[1] != OP_ANY) return FALSE; }
-   else if (op != OP_CIRC) return FALSE;
-   code += (code[1] << 8) + code[2];
-   }
-while (*code == OP_ALT);
-return TRUE;
-}
-
-
-
-/*************************************************
-*          Check for fixed first char            *
-*************************************************/
-
-/* Try to find out if there is a fixed first character. This is called for
-unanchored expressions, as it speeds up their processing quite considerably.
-Consider each alternative branch. If they all start with the same char, or with
-a bracket all of whose alternatives start with the same char (recurse ad lib),
-then we return that char, otherwise -1.
-
-Arguments:
-  code       points to start of expression (the bracket)
-  options    pointer to the options (used to check casing changes)
-
-Returns:     -1 or the fixed first char
-*/
-
-static int
-find_firstchar(const uschar *code, int *options)
-{
-register int c = -1;
-do {
-   int d;
-   const uschar *scode = first_significant_code(code + 3, options,
-     PCRE_CASELESS, TRUE);
-   register int op = *scode;
-
-   if (op >= OP_BRA) op = OP_BRA;
-
-   switch(op)
-     {
-     default:
-     return -1;
-
-     case OP_BRA:
-     case OP_ASSERT:
-     case OP_ONCE:
-     case OP_COND:
-     if ((d = find_firstchar(scode, options)) < 0) return -1;
-     if (c < 0) c = d; else if (c != d) return -1;
-     break;
-
-     case OP_EXACT:       /* Fall through */
-     scode++;
-
-     case OP_CHARS:       /* Fall through */
-     scode++;
-
-     case OP_PLUS:
-     case OP_MINPLUS:
-     if (c < 0) c = scode[1]; else if (c != scode[1]) return -1;
-     break;
-     }
-
-   code += (code[1] << 8) + code[2];
-   }
-while (*code == OP_ALT);
-return c;
-}
-
-
-
-
-
-/*************************************************
-*        Compile a Regular Expression            *
-*************************************************/
-
-/* This function takes a string and returns a pointer to a block of store
-holding a compiled version of the expression.
-
-Arguments:
-  pattern      the regular expression
-  options      various option bits
-  errorptr     pointer to pointer to error text
-  erroroffset  ptr offset in pattern where error was detected
-  tables       pointer to character tables or NULL
-
-Returns:       pointer to compiled data block, or NULL on error,
-               with errorptr and erroroffset set
-*/
-
-pcre *
-pcre_compile(const char *pattern, int options, const char **errorptr,
-  int *erroroffset, const unsigned char *tables)
-{
-real_pcre *re;
-int length = 3;      /* For initial BRA plus length */
-int runlength;
-int c, reqchar, countlits;
-int bracount = 0;
-int top_backref = 0;
-int branch_extra = 0;
-int branch_newextra;
-unsigned int brastackptr = 0;
-size_t size;
-uschar *code;
-const uschar *ptr;
-compile_data compile_block;
-int brastack[BRASTACK_SIZE];
-uschar bralenstack[BRASTACK_SIZE];
-
-#ifdef DEBUG
-uschar *code_base, *code_end;
-#endif
-
-/* Can't support UTF8 unless PCRE has been compiled to include the code. */
-
-#ifndef SUPPORT_UTF8
-if ((options & PCRE_UTF8) != 0)
-  {
-  *errorptr = ERR32;
-  return NULL;
-  }
-#endif
-
-/* We can't pass back an error message if errorptr is NULL; I guess the best we
-can do is just return NULL. */
-
-if (errorptr == NULL) return NULL;
-*errorptr = NULL;
-
-/* However, we can give a message for this error */
-
-if (erroroffset == NULL)
-  {
-  *errorptr = ERR16;
-  return NULL;
-  }
-*erroroffset = 0;
-
-if ((options & ~PUBLIC_OPTIONS) != 0)
-  {
-  *errorptr = ERR17;
-  return NULL;
-  }
-
-/* Set up pointers to the individual character tables */
-
-if (tables == NULL) tables = pcre_default_tables;
-compile_block.lcc = tables + lcc_offset;
-compile_block.fcc = tables + fcc_offset;
-compile_block.cbits = tables + cbits_offset;
-compile_block.ctypes = tables + ctypes_offset;
-
-/* Reflect pattern for debugging output */
-
-DPRINTF(("------------------------------------------------------------------\n"));
-DPRINTF(("%s\n", pattern));
-
-/* The first thing to do is to make a pass over the pattern to compute the
-amount of store required to hold the compiled code. This does not have to be
-perfect as long as errors are overestimates. At the same time we can detect any
-internal flag settings. Make an attempt to correct for any counted white space
-if an "extended" flag setting appears late in the pattern. We can't be so
-clever for #-comments. */
-
-ptr = (const uschar *)(pattern - 1);
-while ((c = *(++ptr)) != 0)
-  {
-  int min, max;
-  int class_charcount;
-
-  if ((options & PCRE_EXTENDED) != 0)
-    {
-    if ((compile_block.ctypes[c] & ctype_space) != 0) continue;
-    if (c == '#')
-      {
-      /* The space before the ; is to avoid a warning on a silly compiler
-      on the Macintosh. */
-      while ((c = *(++ptr)) != 0 && c != '\n') ;
-      continue;
-      }
-    }
-
-  switch(c)
-    {
-    /* A backslashed item may be an escaped "normal" character or a
-    character type. For a "normal" character, put the pointers and
-    character back so that tests for whitespace etc. in the input
-    are done correctly. */
-
-    case '\\':
-      {
-      const uschar *save_ptr = ptr;
-      c = check_escape(&ptr, errorptr, bracount, options, FALSE, &compile_block);
-      if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-      if (c >= 0)
-        {
-        ptr = save_ptr;
-        c = '\\';
-        goto NORMAL_CHAR;
-        }
-      }
-    length++;
-
-    /* A back reference needs an additional char, plus either one or 5
-    bytes for a repeat. We also need to keep the value of the highest
-    back reference. */
-
-    if (c <= -ESC_REF)
-      {
-      int refnum = -c - ESC_REF;
-      if (refnum > top_backref) top_backref = refnum;
-      length++;   /* For single back reference */
-      if (ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block))
-        {
-        ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block);
-        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-        if ((min == 0 && (max == 1 || max == -1)) ||
-          (min == 1 && max == -1))
-            length++;
-        else length += 5;
-        if (ptr[1] == '?') ptr++;
-        }
-      }
-    continue;
-
-    case '^':
-    case '.':
-    case '$':
-    case '*':     /* These repeats won't be after brackets; */
-    case '+':     /* those are handled separately */
-    case '?':
-    length++;
-    continue;
-
-    /* This covers the cases of repeats after a single char, metachar, class,
-    or back reference. */
-
-    case '{':
-    if (!is_counted_repeat(ptr+1, &compile_block)) goto NORMAL_CHAR;
-    ptr = read_repeat_counts(ptr+1, &min, &max, errorptr, &compile_block);
-    if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-    if ((min == 0 && (max == 1 || max == -1)) ||
-      (min == 1 && max == -1))
-        length++;
-    else
-      {
-      length--;   /* Uncount the original char or metachar */
-      if (min == 1) length++; else if (min > 0) length += 4;
-      if (max > 0) length += 4; else length += 2;
-      }
-    if (ptr[1] == '?') ptr++;
-    continue;
-
-    /* An alternation contains an offset to the next branch or ket. If any ims
-    options changed in the previous branch(es), and/or if we are in a
-    lookbehind assertion, extra space will be needed at the start of the
-    branch. This is handled by branch_extra. */
-
-    case '|':
-    length += 3 + branch_extra;
-    continue;
-
-    /* A character class uses 33 characters. Don't worry about character types
-    that aren't allowed in classes - they'll get picked up during the compile.
-    A character class that contains only one character uses 2 or 3 bytes,
-    depending on whether it is negated or not. Notice this where we can. */
-
-    case '[':
-    class_charcount = 0;
-    if (*(++ptr) == '^') ptr++;
-    do
-      {
-      if (*ptr == '\\')
-        {
-        int ch = check_escape(&ptr, errorptr, bracount, options, TRUE,
-          &compile_block);
-        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-        if (-ch == ESC_b) class_charcount++; else class_charcount = 10;
-        }
-      else class_charcount++;
-      ptr++;
-      }
-    while (*ptr != 0 && *ptr != ']');
-
-    /* Repeats for negated single chars are handled by the general code */
-
-    if (class_charcount == 1) length += 3; else
-      {
-      length += 33;
-
-      /* A repeat needs either 1 or 5 bytes. */
-
-      if (*ptr != 0 && ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block))
-        {
-        ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block);
-        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-        if ((min == 0 && (max == 1 || max == -1)) ||
-          (min == 1 && max == -1))
-            length++;
-        else length += 5;
-        if (ptr[1] == '?') ptr++;
-        }
-      }
-    continue;
-
-    /* Brackets may be genuine groups or special things */
-
-    case '(':
-    branch_newextra = 0;
-
-    /* Handle special forms of bracket, which all start (? */
-
-    if (ptr[1] == '?')
-      {
-      int set, unset;
-      int *optset;
-
-      switch (c = ptr[2])
-        {
-        /* Skip over comments entirely */
-        case '#':
-        ptr += 3;
-        while (*ptr != 0 && *ptr != ')') ptr++;
-        if (*ptr == 0)
-          {
-          *errorptr = ERR18;
-          goto PCRE_ERROR_RETURN;
-          }
-        continue;
-
-        /* Non-referencing groups and lookaheads just move the pointer on, and
-        then behave like a non-special bracket, except that they don't increment
-        the count of extracting brackets. Ditto for the "once only" bracket,
-        which is in Perl from version 5.005. */
-
-        case ':':
-        case '=':
-        case '!':
-        case '>':
-        ptr += 2;
-        break;
-
-        /* A recursive call to the regex is an extension, to provide the
-        facility which can be obtained by $(?p{perl-code}) in Perl 5.6. */
-
-        case 'R':
-        if (ptr[3] != ')')
-          {
-          *errorptr = ERR29;
-          goto PCRE_ERROR_RETURN;
-          }
-        ptr += 3;
-        length += 1;
-        break;
-
-        /* Lookbehinds are in Perl from version 5.005 */
-
-        case '<':
-        if (ptr[3] == '=' || ptr[3] == '!')
-          {
-          ptr += 3;
-          branch_newextra = 3;
-          length += 3;         /* For the first branch */
-          break;
-          }
-        *errorptr = ERR24;
-        goto PCRE_ERROR_RETURN;
-
-        /* Conditionals are in Perl from version 5.005. The bracket must either
-        be followed by a number (for bracket reference) or by an assertion
-        group. */
-
-        case '(':
-        if ((compile_block.ctypes[ptr[3]] & ctype_digit) != 0)
-          {
-          ptr += 4;
-          length += 2;
-          while ((compile_block.ctypes[*ptr] & ctype_digit) != 0) ptr++;
-          if (*ptr != ')')
-            {
-            *errorptr = ERR26;
-            goto PCRE_ERROR_RETURN;
-            }
-          }
-        else   /* An assertion must follow */
-          {
-          ptr++;   /* Can treat like ':' as far as spacing is concerned */
-          if (ptr[2] != '?' ||
-             (ptr[3] != '=' && ptr[3] != '!' && ptr[3] != '<') )
-            {
-            ptr += 2;    /* To get right offset in message */
-            *errorptr = ERR28;
-            goto PCRE_ERROR_RETURN;
-            }
-          }
-        break;
-
-        /* Else loop checking valid options until ) is met. Anything else is an
-        error. If we are without any brackets, i.e. at top level, the settings
-        act as if specified in the options, so massage the options immediately.
-        This is for backward compatibility with Perl 5.004. */
-
-        default:
-        set = unset = 0;
-        optset = &set;
-        ptr += 2;
-
-        for (;; ptr++)
-          {
-          c = *ptr;
-          switch (c)
-            {
-            case 'i':
-            *optset |= PCRE_CASELESS;
-            continue;
-
-            case 'm':
-            *optset |= PCRE_MULTILINE;
-            continue;
-
-            case 's':
-            *optset |= PCRE_DOTALL;
-            continue;
-
-            case 'x':
-            *optset |= PCRE_EXTENDED;
-            continue;
-
-            case 'X':
-            *optset |= PCRE_EXTRA;
-            continue;
-
-            case 'U':
-            *optset |= PCRE_UNGREEDY;
-            continue;
-
-            case '-':
-            optset = &unset;
-            continue;
-
-            /* A termination by ')' indicates an options-setting-only item;
-            this is global at top level; otherwise nothing is done here and
-            it is handled during the compiling process on a per-bracket-group
-            basis. */
-
-            case ')':
-            if (brastackptr == 0)
-              {
-              options = (options | set) & (~unset);
-              set = unset = 0;     /* To save length */
-              }
-            /* Fall through */
-
-            /* A termination by ':' indicates the start of a nested group with
-            the given options set. This is again handled at compile time, but
-            we must allow for compiled space if any of the ims options are
-            set. We also have to allow for resetting space at the end of
-            the group, which is why 4 is added to the length and not just 2.
-            If there are several changes of options within the same group, this
-            will lead to an over-estimate on the length, but this shouldn't
-            matter very much. We also have to allow for resetting options at
-            the start of any alternations, which we do by setting
-            branch_newextra to 2. Finally, we record whether the case-dependent
-            flag ever changes within the regex. This is used by the "required
-            character" code. */
-
-            case ':':
-            if (((set|unset) & PCRE_IMS) != 0)
-              {
-              length += 4;
-              branch_newextra = 2;
-              if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED;
-              }
-            goto END_OPTIONS;
-
-            /* Unrecognized option character */
-
-            default:
-            *errorptr = ERR12;
-            goto PCRE_ERROR_RETURN;
-            }
-          }
-
-        /* If we hit a closing bracket, that's it - this is a freestanding
-        option-setting. We need to ensure that branch_extra is updated if
-        necessary. The only values branch_newextra can have here are 0 or 2.
-        If the value is 2, then branch_extra must either be 2 or 5, depending
-        on whether this is a lookbehind group or not. */
-
-        END_OPTIONS:
-        if (c == ')')
-          {
-          if (branch_newextra == 2 && (branch_extra == 0 || branch_extra == 3))
-            branch_extra += branch_newextra;
-          continue;
-          }
-
-        /* If options were terminated by ':' control comes here. Fall through
-        to handle the group below. */
-        }
-      }
-
-    /* Extracting brackets must be counted so we can process escapes in a
-    Perlish way. */
-
-    else bracount++;
-
-    /* Non-special forms of bracket. Save length for computing whole length
-    at end if there's a repeat that requires duplication of the group. Also
-    save the current value of branch_extra, and start the new group with
-    the new value. If non-zero, this will either be 2 for a (?imsx: group, or 3
-    for a lookbehind assertion. */
-
-    if (brastackptr >= sizeof(brastack)/sizeof(int))
-      {
-      *errorptr = ERR19;
-      goto PCRE_ERROR_RETURN;
-      }
-
-    bralenstack[brastackptr] = branch_extra;
-    branch_extra = branch_newextra;
-
-    brastack[brastackptr++] = length;
-    length += 3;
-    continue;
-
-    /* Handle ket. Look for subsequent max/min; for certain sets of values we
-    have to replicate this bracket up to that many times. If brastackptr is
-    0 this is an unmatched bracket which will generate an error, but take care
-    not to try to access brastack[-1] when computing the length and restoring
-    the branch_extra value. */
-
-    case ')':
-    length += 3;
-      {
-      int minval = 1;
-      int maxval = 1;
-      int duplength;
-
-      if (brastackptr > 0)
-        {
-        duplength = length - brastack[--brastackptr];
-        branch_extra = bralenstack[brastackptr];
-        }
-      else duplength = 0;
-
-      /* Leave ptr at the final char; for read_repeat_counts this happens
-      automatically; for the others we need an increment. */
-
-      if ((c = ptr[1]) == '{' && is_counted_repeat(ptr+2, &compile_block))
-        {
-        ptr = read_repeat_counts(ptr+2, &minval, &maxval, errorptr,
-          &compile_block);
-        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-        }
-      else if (c == '*') { minval = 0; maxval = -1; ptr++; }
-      else if (c == '+') { maxval = -1; ptr++; }
-      else if (c == '?') { minval = 0; ptr++; }
-
-      /* If the minimum is zero, we have to allow for an OP_BRAZERO before the
-      group, and if the maximum is greater than zero, we have to replicate
-      maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting
-      bracket set - hence the 7. */
-
-      if (minval == 0)
-        {
-        length++;
-        if (maxval > 0) length += (maxval - 1) * (duplength + 7);
-        }
-
-      /* When the minimum is greater than zero, 1 we have to replicate up to
-      minval-1 times, with no additions required in the copies. Then, if
-      there is a limited maximum we have to replicate up to maxval-1 times
-      allowing for a BRAZERO item before each optional copy and nesting
-      brackets for all but one of the optional copies. */
-
-      else
-        {
-        length += (minval - 1) * duplength;
-        if (maxval > minval)   /* Need this test as maxval=-1 means no limit */
-          length += (maxval - minval) * (duplength + 7) - 6;
-        }
-      }
-    continue;
-
-    /* Non-special character. For a run of such characters the length required
-    is the number of characters + 2, except that the maximum run length is 255.
-    We won't get a skipped space or a non-data escape or the start of a #
-    comment as the first character, so the length can't be zero. */
-
-    NORMAL_CHAR:
-    default:
-    length += 2;
-    runlength = 0;
-    do
-      {
-      if ((options & PCRE_EXTENDED) != 0)
-        {
-        if ((compile_block.ctypes[c] & ctype_space) != 0) continue;
-        if (c == '#')
-          {
-          /* The space before the ; is to avoid a warning on a silly compiler
-          on the Macintosh. */
-          while ((c = *(++ptr)) != 0 && c != '\n') ;
-          continue;
-          }
-        }
-
-      /* Backslash may introduce a data char or a metacharacter; stop the
-      string before the latter. */
-
-      if (c == '\\')
-        {
-        const uschar *saveptr = ptr;
-        c = check_escape(&ptr, errorptr, bracount, options, FALSE,
-          &compile_block);
-        if (*errorptr != NULL) goto PCRE_ERROR_RETURN;
-        if (c < 0) { ptr = saveptr; break; }
-
-#ifdef SUPPORT_UTF8
-        if (c > 127 && (options & PCRE_UTF8) != 0)
-          {
-          int i;
-          for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)
-            if (c <= utf8_table1[i]) break;
-          runlength += i;
-          }
-#endif
-        }
-
-      /* Ordinary character or single-char escape */
-
-      runlength++;
-      }
-
-    /* This "while" is the end of the "do" above. */
-
-    while (runlength < MAXLIT &&
-      (compile_block.ctypes[c = *(++ptr)] & ctype_meta) == 0);
-
-    ptr--;
-    length += runlength;
-    continue;
-    }
-  }
-
-length += 4;    /* For final KET and END */
-
-if (length > 65539)
-  {
-  *errorptr = ERR20;
-  return NULL;
-  }
-
-/* Compute the size of data block needed and get it, either from malloc or
-externally provided function. We specify "code[0]" in the offsetof() expression
-rather than just "code", because it has been reported that one broken compiler
-fails on "code" because it is also an independent variable. It should make no
-difference to the value of the offsetof(). */
-
-size = length + offsetof(real_pcre, code[0]);
-re = (real_pcre *)(pcre_malloc)(size);
-
-if (re == NULL)
-  {
-  *errorptr = ERR21;
-  return NULL;
-  }
-
-/* Put in the magic number, and save the size, options, and table pointer */
-
-re->magic_number = MAGIC_NUMBER;
-re->size = size;
-re->options = options;
-re->tables = tables;
-
-/* Set up a starting, non-extracting bracket, then compile the expression. On
-error, *errorptr will be set non-NULL, so we don't need to look at the result
-of the function here. */
-
-ptr = (const uschar *)pattern;
-code = re->code;
-*code = OP_BRA;
-bracount = 0;
-(void)compile_regex(options, -1, &bracount, &code, &ptr, errorptr, FALSE, -1,
-  &reqchar, &countlits, &compile_block);
-re->top_bracket = bracount;
-re->top_backref = top_backref;
-
-/* If not reached end of pattern on success, there's an excess bracket. */
-
-if (*errorptr == NULL && *ptr != 0) *errorptr = ERR22;
-
-/* Fill in the terminating state and check for disastrous overflow, but
-if debugging, leave the test till after things are printed out. */
-
-*code++ = OP_END;
-
-#ifndef DEBUG
-if (code - re->code > length) *errorptr = ERR23;
-#endif
-
-/* Give an error if there's back reference to a non-existent capturing
-subpattern. */
-
-if (top_backref > re->top_bracket) *errorptr = ERR15;
-
-/* Failed to compile */
-
-if (*errorptr != NULL)
-  {
-  (pcre_free)(re);
-  PCRE_ERROR_RETURN:
-  *erroroffset = ptr - (const uschar *)pattern;
-  return NULL;
-  }
-
-/* If the anchored option was not passed, set flag if we can determine that the
-pattern is anchored by virtue of ^ characters or \A or anything else (such as
-starting with .* when DOTALL is set).
-
-Otherwise, see if we can determine what the first character has to be, because
-that speeds up unanchored matches no end. If not, see if we can set the
-PCRE_STARTLINE flag. This is helpful for multiline matches when all branches
-start with ^. and also when all branches start with .* for non-DOTALL matches.
-*/
-
-if ((options & PCRE_ANCHORED) == 0)
-  {
-  int temp_options = options;
-  if (is_anchored(re->code, &temp_options))
-    re->options |= PCRE_ANCHORED;
-  else
-    {
-    int ch = find_firstchar(re->code, &temp_options);
-    if (ch >= 0)
-      {
-      re->first_char = ch;
-      re->options |= PCRE_FIRSTSET;
-      }
-    else if (is_startline(re->code))
-      re->options |= PCRE_STARTLINE;
-    }
-  }
-
-/* Save the last required character if there are at least two literal
-characters on all paths, or if there is no first character setting. */
-
-if (reqchar >= 0 && (countlits > 1 || (re->options & PCRE_FIRSTSET) == 0))
-  {
-  re->req_char = reqchar;
-  re->options |= PCRE_REQCHSET;
-  }
-
-/* Print out the compiled data for debugging */
-
-#ifdef DEBUG
-
-printf("Length = %d top_bracket = %d top_backref = %d\n",
-  length, re->top_bracket, re->top_backref);
-
-if (re->options != 0)
-  {
-  printf("%s%s%s%s%s%s%s%s%s\n",
-    ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "",
-    ((re->options & PCRE_CASELESS) != 0)? "caseless " : "",
-    ((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "",
-    ((re->options & PCRE_EXTENDED) != 0)? "extended " : "",
-    ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "",
-    ((re->options & PCRE_DOTALL) != 0)? "dotall " : "",
-    ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "",
-    ((re->options & PCRE_EXTRA) != 0)? "extra " : "",
-    ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : "");
-  }
-
-if ((re->options & PCRE_FIRSTSET) != 0)
-  {
-  if (isprint(re->first_char)) printf("First char = %c\n", re->first_char);
-    else printf("First char = \\x%02x\n", re->first_char);
-  }
-
-if ((re->options & PCRE_REQCHSET) != 0)
-  {
-  if (isprint(re->req_char)) printf("Req char = %c\n", re->req_char);
-    else printf("Req char = \\x%02x\n", re->req_char);
-  }
-
-code_end = code;
-code_base = code = re->code;
-
-while (code < code_end)
-  {
-  int charlength;
-
-  printf("%3d ", code - code_base);
-
-  if (*code >= OP_BRA)
-    {
-    printf("%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA);
-    code += 2;
-    }
-
-  else switch(*code)
-    {
-    case OP_OPT:
-    printf(" %.2x %s", code[1], OP_names[*code]);
-    code++;
-    break;
-
-    case OP_COND:
-    printf("%3d Cond", (code[1] << 8) + code[2]);
-    code += 2;
-    break;
-
-    case OP_CREF:
-    printf(" %.2d %s", code[1], OP_names[*code]);
-    code++;
-    break;
-
-    case OP_CHARS:
-    charlength = *(++code);
-    printf("%3d ", charlength);
-    while (charlength-- > 0)
-      if (isprint(c = *(++code))) printf("%c", c); else printf("\\x%02x", c);
-    break;
-
-    case OP_KETRMAX:
-    case OP_KETRMIN:
-    case OP_ALT:
-    case OP_KET:
-    case OP_ASSERT:
-    case OP_ASSERT_NOT:
-    case OP_ASSERTBACK:
-    case OP_ASSERTBACK_NOT:
-    case OP_ONCE:
-    printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
-    code += 2;
-    break;
-
-    case OP_REVERSE:
-    printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
-    code += 2;
-    break;
-
-    case OP_STAR:
-    case OP_MINSTAR:
-    case OP_PLUS:
-    case OP_MINPLUS:
-    case OP_QUERY:
-    case OP_MINQUERY:
-    case OP_TYPESTAR:
-    case OP_TYPEMINSTAR:
-    case OP_TYPEPLUS:
-    case OP_TYPEMINPLUS:
-    case OP_TYPEQUERY:
-    case OP_TYPEMINQUERY:
-    if (*code >= OP_TYPESTAR)
-      printf("    %s", OP_names[code[1]]);
-    else if (isprint(c = code[1])) printf("    %c", c);
-      else printf("    \\x%02x", c);
-    printf("%s", OP_names[*code++]);
-    break;
-
-    case OP_EXACT:
-    case OP_UPTO:
-    case OP_MINUPTO:
-    if (isprint(c = code[3])) printf("    %c{", c);
-      else printf("    \\x%02x{", c);
-    if (*code != OP_EXACT) printf("0,");
-    printf("%d}", (code[1] << 8) + code[2]);
-    if (*code == OP_MINUPTO) printf("?");
-    code += 3;
-    break;
-
-    case OP_TYPEEXACT:
-    case OP_TYPEUPTO:
-    case OP_TYPEMINUPTO:
-    printf("    %s{", OP_names[code[3]]);
-    if (*code != OP_TYPEEXACT) printf(",");
-    printf("%d}", (code[1] << 8) + code[2]);
-    if (*code == OP_TYPEMINUPTO) printf("?");
-    code += 3;
-    break;
-
-    case OP_NOT:
-    if (isprint(c = *(++code))) printf("    [^%c]", c);
-      else printf("    [^\\x%02x]", c);
-    break;
-
-    case OP_NOTSTAR:
-    case OP_NOTMINSTAR:
-    case OP_NOTPLUS:
-    case OP_NOTMINPLUS:
-    case OP_NOTQUERY:
-    case OP_NOTMINQUERY:
-    if (isprint(c = code[1])) printf("    [^%c]", c);
-      else printf("    [^\\x%02x]", c);
-    printf("%s", OP_names[*code++]);
-    break;
-
-    case OP_NOTEXACT:
-    case OP_NOTUPTO:
-    case OP_NOTMINUPTO:
-    if (isprint(c = code[3])) printf("    [^%c]{", c);
-      else printf("    [^\\x%02x]{", c);
-    if (*code != OP_NOTEXACT) printf(",");
-    printf("%d}", (code[1] << 8) + code[2]);
-    if (*code == OP_NOTMINUPTO) printf("?");
-    code += 3;
-    break;
-
-    case OP_REF:
-    printf("    \\%d", *(++code));
-    code ++;
-    goto CLASS_REF_REPEAT;
-
-    case OP_CLASS:
-      {
-      int i, min, max;
-      code++;
-      printf("    [");
-
-      for (i = 0; i < 256; i++)
-        {
-        if ((code[i/8] & (1 << (i&7))) != 0)
-          {
-          int j;
-          for (j = i+1; j < 256; j++)
-            if ((code[j/8] & (1 << (j&7))) == 0) break;
-          if (i == '-' || i == ']') printf("\\");
-          if (isprint(i)) printf("%c", i); else printf("\\x%02x", i);
-          if (--j > i)
-            {
-            printf("-");
-            if (j == '-' || j == ']') printf("\\");
-            if (isprint(j)) printf("%c", j); else printf("\\x%02x", j);
-            }
-          i = j;
-          }
-        }
-      printf("]");
-      code += 32;
-
-      CLASS_REF_REPEAT:
-
-      switch(*code)
-        {
-        case OP_CRSTAR:
-        case OP_CRMINSTAR:
-        case OP_CRPLUS:
-        case OP_CRMINPLUS:
-        case OP_CRQUERY:
-        case OP_CRMINQUERY:
-        printf("%s", OP_names[*code]);
-        break;
-
-        case OP_CRRANGE:
-        case OP_CRMINRANGE:
-        min = (code[1] << 8) + code[2];
-        max = (code[3] << 8) + code[4];
-        if (max == 0) printf("{%d,}", min);
-        else printf("{%d,%d}", min, max);
-        if (*code == OP_CRMINRANGE) printf("?");
-        code += 4;
-        break;
-
-        default:
-        code--;
-        }
-      }
-    break;
-
-    /* Anything else is just a one-node item */
-
-    default:
-    printf("    %s", OP_names[*code]);
-    break;
-    }
-
-  code++;
-  printf("\n");
-  }
-printf("------------------------------------------------------------------\n");
-
-/* This check is done here in the debugging case so that the code that
-was compiled can be seen. */
-
-if (code - re->code > length)
-  {
-  *errorptr = ERR23;
-  (pcre_free)(re);
-  *erroroffset = ptr - (uschar *)pattern;
-  return NULL;
-  }
-#endif
-
-return (pcre *)re;
-}
-
-
-
-/*************************************************
-*          Match a back-reference                *
-*************************************************/
-
-/* If a back reference hasn't been set, the length that is passed is greater
-than the number of characters left in the string, so the match fails.
-
-Arguments:
-  offset      index into the offset vector
-  eptr        points into the subject
-  length      length to be matched
-  md          points to match data block
-  ims         the ims flags
-
-Returns:      TRUE if matched
-*/
-
-static BOOL
-match_ref(int offset, register const uschar *eptr, int length, match_data *md,
-  unsigned long int ims)
-{
-const uschar *p = md->start_subject + md->offset_vector[offset];
-
-#ifdef DEBUG
-if (eptr >= md->end_subject)
-  printf("matching subject <null>");
-else
-  {
-  printf("matching subject ");
-  pchars(eptr, length, TRUE, md);
-  }
-printf(" against backref ");
-pchars(p, length, FALSE, md);
-printf("\n");
-#endif
-
-/* Always fail if not enough characters left */
-
-if (length > md->end_subject - eptr) return FALSE;
-
-/* Separate the caselesss case for speed */
-
-if ((ims & PCRE_CASELESS) != 0)
-  {
-  while (length-- > 0)
-    if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE;
-  }
-else
-  { while (length-- > 0) if (*p++ != *eptr++) return FALSE; }
-
-return TRUE;
-}
-
-
-
-/*************************************************
-*         Match from current position            *
-*************************************************/
-
-/* On entry ecode points to the first opcode, and eptr to the first character
-in the subject string, while eptrb holds the value of eptr at the start of the
-last bracketed group - used for breaking infinite loops matching zero-length
-strings.
-
-Arguments:
-   eptr        pointer in subject
-   ecode       position in code
-   offset_top  current top pointer
-   md          pointer to "static" info for the match
-   ims         current /i, /m, and /s options
-   eptrb       pointer to chain of blocks containing eptr at start of
-                 brackets - for testing for empty matches
-   flags       can contain
-                 match_condassert - this is an assertion condition
-                 match_isgroup - this is the start of a bracketed group
-
-Returns:       TRUE if matched
-*/
-
-static BOOL
-match(register const uschar *eptr, register const uschar *ecode,
-  int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb,
-  int flags)
-{
-unsigned long int original_ims = ims;   /* Save for resetting on ')' */
-eptrblock newptrb;
-
-/* At the start of a bracketed group, add the current subject pointer to the
-stack of such pointers, to be re-instated at the end of the group when we hit
-the closing ket. When match() is called in other circumstances, we don't add to
-the stack. */
-
-if ((flags & match_isgroup) != 0)
-  {
-  newptrb.prev = eptrb;
-  newptrb.saved_eptr = eptr;
-  eptrb = &newptrb;
-  }
-
-/* Now start processing the operations. */
-
-for (;;)
-  {
-  int op = (int)*ecode;
-  int min, max, ctype;
-  register int i;
-  register int c;
-  BOOL minimize = FALSE;
-
-  /* Opening capturing bracket. If there is space in the offset vector, save
-  the current subject position in the working slot at the top of the vector. We
-  mustn't change the current values of the data slot, because they may be set
-  from a previous iteration of this group, and be referred to by a reference
-  inside the group.
-
-  If the bracket fails to match, we need to restore this value and also the
-  values of the final offsets, in case they were set by a previous iteration of
-  the same bracket.
-
-  If there isn't enough space in the offset vector, treat this as if it were a
-  non-capturing bracket. Don't worry about setting the flag for the error case
-  here; that is handled in the code for KET. */
-
-  if (op > OP_BRA)
-    {
-    int number = op - OP_BRA;
-    int offset = number << 1;
-
-#ifdef DEBUG
-    printf("start bracket %d subject=", number);
-    pchars(eptr, 16, TRUE, md);
-    printf("\n");
-#endif
-
-    if (offset < md->offset_max)
-      {
-      int save_offset1 = md->offset_vector[offset];
-      int save_offset2 = md->offset_vector[offset+1];
-      int save_offset3 = md->offset_vector[md->offset_end - number];
-
-      DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
-      md->offset_vector[md->offset_end - number] = eptr - md->start_subject;
-
-      do
-        {
-        if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup))
-          return TRUE;
-        ecode += (ecode[1] << 8) + ecode[2];
-        }
-      while (*ecode == OP_ALT);
-
-      DPRINTF(("bracket %d failed\n", number));
-
-      md->offset_vector[offset] = save_offset1;
-      md->offset_vector[offset+1] = save_offset2;
-      md->offset_vector[md->offset_end - number] = save_offset3;
-      return FALSE;
-      }
-
-    /* Insufficient room for saving captured contents */
-
-    else op = OP_BRA;
-    }
-
-  /* Other types of node can be handled by a switch */
-
-  switch(op)
-    {
-    case OP_BRA:     /* Non-capturing bracket: optimized */
-    DPRINTF(("start bracket 0\n"));
-    do
-      {
-      if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup))
-        return TRUE;
-      ecode += (ecode[1] << 8) + ecode[2];
-      }
-    while (*ecode == OP_ALT);
-    DPRINTF(("bracket 0 failed\n"));
-    return FALSE;
-
-    /* Conditional group: compilation checked that there are no more than
-    two branches. If the condition is false, skipping the first branch takes us
-    past the end if there is only one branch, but that's OK because that is
-    exactly what going to the ket would do. */
-
-    case OP_COND:
-    if (ecode[3] == OP_CREF)         /* Condition is extraction test */
-      {
-      int offset = ecode[4] << 1;    /* Doubled reference number */
-      return match(eptr,
-        ecode + ((offset < offset_top && md->offset_vector[offset] >= 0)?
-          5 : 3 + (ecode[1] << 8) + ecode[2]),
-        offset_top, md, ims, eptrb, match_isgroup);
-      }
-
-    /* The condition is an assertion. Call match() to evaluate it - setting
-    the final argument TRUE causes it to stop at the end of an assertion. */
-
-    else
-      {
-      if (match(eptr, ecode+3, offset_top, md, ims, NULL,
-          match_condassert | match_isgroup))
-        {
-        ecode += 3 + (ecode[4] << 8) + ecode[5];
-        while (*ecode == OP_ALT) ecode += (ecode[1] << 8) + ecode[2];
-        }
-      else ecode += (ecode[1] << 8) + ecode[2];
-      return match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup);
-      }
-    /* Control never reaches here */
-
-    /* Skip over conditional reference data if encountered (should not be) */
-
-    case OP_CREF:
-    ecode += 2;
-    break;
-
-    /* End of the pattern. If PCRE_NOTEMPTY is set, fail if we have matched
-    an empty string - recursion will then try other alternatives, if any. */
-
-    case OP_END:
-    if (md->notempty && eptr == md->start_match) return FALSE;
-    md->end_match_ptr = eptr;          /* Record where we ended */
-    md->end_offset_top = offset_top;   /* and how many extracts were taken */
-    return TRUE;
-
-    /* Change option settings */
-
-    case OP_OPT:
-    ims = ecode[1];
-    ecode += 2;
-    DPRINTF(("ims set to %02lx\n", ims));
-    break;
-
-    /* Assertion brackets. Check the alternative branches in turn - the
-    matching won't pass the KET for an assertion. If any one branch matches,
-    the assertion is true. Lookbehind assertions have an OP_REVERSE item at the
-    start of each branch to move the current point backwards, so the code at
-    this level is identical to the lookahead case. */
-
-    case OP_ASSERT:
-    case OP_ASSERTBACK:
-    do
-      {
-      if (match(eptr, ecode+3, offset_top, md, ims, NULL, match_isgroup)) break;
-      ecode += (ecode[1] << 8) + ecode[2];
-      }
-    while (*ecode == OP_ALT);
-    if (*ecode == OP_KET) return FALSE;
-
-    /* If checking an assertion for a condition, return TRUE. */
-
-    if ((flags & match_condassert) != 0) return TRUE;
-
-    /* Continue from after the assertion, updating the offsets high water
-    mark, since extracts may have been taken during the assertion. */
-
-    do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT);
-    ecode += 3;
-    offset_top = md->end_offset_top;
-    continue;
-
-    /* Negative assertion: all branches must fail to match */
-
-    case OP_ASSERT_NOT:
-    case OP_ASSERTBACK_NOT:
-    do
-      {
-      if (match(eptr, ecode+3, offset_top, md, ims, NULL, match_isgroup))
-        return FALSE;
-      ecode += (ecode[1] << 8) + ecode[2];
-      }
-    while (*ecode == OP_ALT);
-
-    if ((flags & match_condassert) != 0) return TRUE;
-
-    ecode += 3;
-    continue;
-
-    /* Move the subject pointer back. This occurs only at the start of
-    each branch of a lookbehind assertion. If we are too close to the start to
-    move back, this match function fails. When working with UTF-8 we move
-    back a number of characters, not bytes. */
-
-    case OP_REVERSE:
-#ifdef SUPPORT_UTF8
-    c = (ecode[1] << 8) + ecode[2];
-    for (i = 0; i < c; i++)
-      {
-      eptr--;
-      BACKCHAR(eptr)
-      }
-#else
-    eptr -= (ecode[1] << 8) + ecode[2];
-#endif
-
-    if (eptr < md->start_subject) return FALSE;
-    ecode += 3;
-    break;
-
-    /* Recursion matches the current regex, nested. If there are any capturing
-    brackets started but not finished, we have to save their starting points
-    and reinstate them after the recursion. However, we don't know how many
-    such there are (offset_top records the completed total) so we just have
-    to save all the potential data. There may be up to 99 such values, which
-    is a bit large to put on the stack, but using malloc for small numbers
-    seems expensive. As a compromise, the stack is used when there are fewer
-    than 16 values to store; otherwise malloc is used. A problem is what to do
-    if the malloc fails ... there is no way of returning to the top level with
-    an error. Save the top 15 values on the stack, and accept that the rest
-    may be wrong. */
-
-    case OP_RECURSE:
-      {
-      BOOL rc;
-      int *save;
-      int stacksave[15];
-
-      c = md->offset_max;
-
-      if (c < 16) save = stacksave; else
-        {
-        save = (int *)(pcre_malloc)((c+1) * sizeof(int));
-        if (save == NULL)
-          {
-          save = stacksave;
-          c = 15;
-          }
-        }
-
-      for (i = 1; i <= c; i++)
-        save[i] = md->offset_vector[md->offset_end - i];
-      rc = match(eptr, md->start_pattern, offset_top, md, ims, eptrb,
-        match_isgroup);
-      for (i = 1; i <= c; i++)
-        md->offset_vector[md->offset_end - i] = save[i];
-      if (save != stacksave) (pcre_free)(save);
-      if (!rc) return FALSE;
-
-      /* In case the recursion has set more capturing values, save the final
-      number, then move along the subject till after the recursive match,
-      and advance one byte in the pattern code. */
-
-      offset_top = md->end_offset_top;
-      eptr = md->end_match_ptr;
-      ecode++;
-      }
-    break;
-
-    /* "Once" brackets are like assertion brackets except that after a match,
-    the point in the subject string is not moved back. Thus there can never be
-    a move back into the brackets. Check the alternative branches in turn - the
-    matching won't pass the KET for this kind of subpattern. If any one branch
-    matches, we carry on as at the end of a normal bracket, leaving the subject
-    pointer. */
-
-    case OP_ONCE:
-      {
-      const uschar *prev = ecode;
-      const uschar *saved_eptr = eptr;
-
-      do
-        {
-        if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup))
-          break;
-        ecode += (ecode[1] << 8) + ecode[2];
-        }
-      while (*ecode == OP_ALT);
-
-      /* If hit the end of the group (which could be repeated), fail */
-
-      if (*ecode != OP_ONCE && *ecode != OP_ALT) return FALSE;
-
-      /* Continue as from after the assertion, updating the offsets high water
-      mark, since extracts may have been taken. */
-
-      do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT);
-
-      offset_top = md->end_offset_top;
-      eptr = md->end_match_ptr;
-
-      /* For a non-repeating ket, just continue at this level. This also
-      happens for a repeating ket if no characters were matched in the group.
-      This is the forcible breaking of infinite loops as implemented in Perl
-      5.005. If there is an options reset, it will get obeyed in the normal
-      course of events. */
-
-      if (*ecode == OP_KET || eptr == saved_eptr)
-        {
-        ecode += 3;
-        break;
-        }
-
-      /* The repeating kets try the rest of the pattern or restart from the
-      preceding bracket, in the appropriate order. We need to reset any options
-      that changed within the bracket before re-running it, so check the next
-      opcode. */
-
-      if (ecode[3] == OP_OPT)
-        {
-        ims = (ims & ~PCRE_IMS) | ecode[4];
-        DPRINTF(("ims set to %02lx at group repeat\n", ims));
-        }
-
-      if (*ecode == OP_KETRMIN)
-        {
-        if (match(eptr, ecode+3, offset_top, md, ims, eptrb, 0) ||
-            match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup))
-              return TRUE;
-        }
-      else  /* OP_KETRMAX */
-        {
-        if (match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup) ||
-            match(eptr, ecode+3, offset_top, md, ims, eptrb, 0)) return TRUE;
-        }
-      }
-    return FALSE;
-
-    /* An alternation is the end of a branch; scan along to find the end of the
-    bracketed group and go to there. */
-
-    case OP_ALT:
-    do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT);
-    break;
-
-    /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating
-    that it may occur zero times. It may repeat infinitely, or not at all -
-    i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper
-    repeat limits are compiled as a number of copies, with the optional ones
-    preceded by BRAZERO or BRAMINZERO. */
-
-    case OP_BRAZERO:
-      {
-      const uschar *next = ecode+1;
-      if (match(eptr, next, offset_top, md, ims, eptrb, match_isgroup))
-        return TRUE;
-      do next += (next[1] << 8) + next[2]; while (*next == OP_ALT);
-      ecode = next + 3;
-      }
-    break;
-
-    case OP_BRAMINZERO:
-      {
-      const uschar *next = ecode+1;
-      do next += (next[1] << 8) + next[2]; while (*next == OP_ALT);
-      if (match(eptr, next+3, offset_top, md, ims, eptrb, match_isgroup))
-        return TRUE;
-      ecode++;
-      }
-    break;
-
-    /* End of a group, repeated or non-repeating. If we are at the end of
-    an assertion "group", stop matching and return TRUE, but record the
-    current high water mark for use by positive assertions. Do this also
-    for the "once" (not-backup up) groups. */
-
-    case OP_KET:
-    case OP_KETRMIN:
-    case OP_KETRMAX:
-      {
-      const uschar *prev = ecode - (ecode[1] << 8) - ecode[2];
-      const uschar *saved_eptr = eptrb->saved_eptr;
-
-      eptrb = eptrb->prev;    /* Back up the stack of bracket start pointers */
-
-      if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT ||
-          *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT ||
-          *prev == OP_ONCE)
-        {
-        md->end_match_ptr = eptr;      /* For ONCE */
-        md->end_offset_top = offset_top;
-        return TRUE;
-        }
-
-      /* In all other cases except a conditional group we have to check the
-      group number back at the start and if necessary complete handling an
-      extraction by setting the offsets and bumping the high water mark. */
-
-      if (*prev != OP_COND)
-        {
-        int number = *prev - OP_BRA;
-        int offset = number << 1;
-
-#ifdef DEBUG
-        printf("end bracket %d", number);
-        printf("\n");
-#endif
-
-        if (number > 0)
-          {
-          if (offset >= md->offset_max) md->offset_overflow = TRUE; else
-            {
-            md->offset_vector[offset] =
-              md->offset_vector[md->offset_end - number];
-            md->offset_vector[offset+1] = eptr - md->start_subject;
-            if (offset_top <= offset) offset_top = offset + 2;
-            }
-          }
-        }
-
-      /* Reset the value of the ims flags, in case they got changed during
-      the group. */
-
-      ims = original_ims;
-      DPRINTF(("ims reset to %02lx\n", ims));
-
-      /* For a non-repeating ket, just continue at this level. This also
-      happens for a repeating ket if no characters were matched in the group.
-      This is the forcible breaking of infinite loops as implemented in Perl
-      5.005. If there is an options reset, it will get obeyed in the normal
-      course of events. */
-
-      if (*ecode == OP_KET || eptr == saved_eptr)
-        {
-        ecode += 3;
-        break;
-        }
-
-      /* The repeating kets try the rest of the pattern or restart from the
-      preceding bracket, in the appropriate order. */
-
-      if (*ecode == OP_KETRMIN)
-        {
-        if (match(eptr, ecode+3, offset_top, md, ims, eptrb, 0) ||
-            match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup))
-              return TRUE;
-        }
-      else  /* OP_KETRMAX */
-        {
-        if (match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup) ||
-            match(eptr, ecode+3, offset_top, md, ims, eptrb, 0)) return TRUE;
-        }
-      }
-    return FALSE;
-
-    /* Start of subject unless notbol, or after internal newline if multiline */
-
-    case OP_CIRC:
-    if (md->notbol && eptr == md->start_subject) return FALSE;
-    if ((ims & PCRE_MULTILINE) != 0)
-      {
-      if (eptr != md->start_subject && eptr[-1] != '\n') return FALSE;
-      ecode++;
-      break;
-      }
-    /* ... else fall through */
-
-    /* Start of subject assertion */
-
-    case OP_SOD:
-    if (eptr != md->start_subject) return FALSE;
-    ecode++;
-    break;
-
-    /* Assert before internal newline if multiline, or before a terminating
-    newline unless endonly is set, else end of subject unless noteol is set. */
-
-    case OP_DOLL:
-    if ((ims & PCRE_MULTILINE) != 0)
-      {
-      if (eptr < md->end_subject) { if (*eptr != '\n') return FALSE; }
-        else { if (md->noteol) return FALSE; }
-      ecode++;
-      break;
-      }
-    else
-      {
-      if (md->noteol) return FALSE;
-      if (!md->endonly)
-        {
-        if (eptr < md->end_subject - 1 ||
-           (eptr == md->end_subject - 1 && *eptr != '\n')) return FALSE;
-
-        ecode++;
-        break;
-        }
-      }
-    /* ... else fall through */
-
-    /* End of subject assertion (\z) */
-
-    case OP_EOD:
-    if (eptr < md->end_subject) return FALSE;
-    ecode++;
-    break;
-
-    /* End of subject or ending \n assertion (\Z) */
-
-    case OP_EODN:
-    if (eptr < md->end_subject - 1 ||
-       (eptr == md->end_subject - 1 && *eptr != '\n')) return FALSE;
-    ecode++;
-    break;
-
-    /* Word boundary assertions */
-
-    case OP_NOT_WORD_BOUNDARY:
-    case OP_WORD_BOUNDARY:
-      {
-      BOOL prev_is_word = (eptr != md->start_subject) &&
-        ((md->ctypes[eptr[-1]] & ctype_word) != 0);
-      BOOL cur_is_word = (eptr < md->end_subject) &&
-        ((md->ctypes[*eptr] & ctype_word) != 0);
-      if ((*ecode++ == OP_WORD_BOUNDARY)?
-           cur_is_word == prev_is_word : cur_is_word != prev_is_word)
-        return FALSE;
-      }
-    break;
-
-    /* Match a single character type; inline for speed */
-
-    case OP_ANY:
-    if ((ims & PCRE_DOTALL) == 0 && eptr < md->end_subject && *eptr == '\n')
-      return FALSE;
-    if (eptr++ >= md->end_subject) return FALSE;
-#ifdef SUPPORT_UTF8
-    if (md->utf8)
-      while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;
-#endif
-    ecode++;
-    break;
-
-    case OP_NOT_DIGIT:
-    if (eptr >= md->end_subject ||
-       (md->ctypes[*eptr++] & ctype_digit) != 0)
-      return FALSE;
-    ecode++;
-    break;
-
-    case OP_DIGIT:
-    if (eptr >= md->end_subject ||
-       (md->ctypes[*eptr++] & ctype_digit) == 0)
-      return FALSE;
-    ecode++;
-    break;
-
-    case OP_NOT_WHITESPACE:
-    if (eptr >= md->end_subject ||
-       (md->ctypes[*eptr++] & ctype_space) != 0)
-      return FALSE;
-    ecode++;
-    break;
-
-    case OP_WHITESPACE:
-    if (eptr >= md->end_subject ||
-       (md->ctypes[*eptr++] & ctype_space) == 0)
-      return FALSE;
-    ecode++;
-    break;
-
-    case OP_NOT_WORDCHAR:
-    if (eptr >= md->end_subject ||
-       (md->ctypes[*eptr++] & ctype_word) != 0)
-      return FALSE;
-    ecode++;
-    break;
-
-    case OP_WORDCHAR:
-    if (eptr >= md->end_subject ||
-       (md->ctypes[*eptr++] & ctype_word) == 0)
-      return FALSE;
-    ecode++;
-    break;
-
-    /* Match a back reference, possibly repeatedly. Look past the end of the
-    item to see if there is repeat information following. The code is similar
-    to that for character classes, but repeated for efficiency. Then obey
-    similar code to character type repeats - written out again for speed.
-    However, if the referenced string is the empty string, always treat
-    it as matched, any number of times (otherwise there could be infinite
-    loops). */
-
-    case OP_REF:
-      {
-      int length;
-      int offset = ecode[1] << 1;                /* Doubled reference number */
-      ecode += 2;                                /* Advance past the item */
-
-      /* If the reference is unset, set the length to be longer than the amount
-      of subject left; this ensures that every attempt at a match fails. We
-      can't just fail here, because of the possibility of quantifiers with zero
-      minima. */
-
-      length = (offset >= offset_top || md->offset_vector[offset] < 0)?
-        md->end_subject - eptr + 1 :
-        md->offset_vector[offset+1] - md->offset_vector[offset];
-
-      /* Set up for repetition, or handle the non-repeated case */
-
-      switch (*ecode)
-        {
-        case OP_CRSTAR:
-        case OP_CRMINSTAR:
-        case OP_CRPLUS:
-        case OP_CRMINPLUS:
-        case OP_CRQUERY:
-        case OP_CRMINQUERY:
-        c = *ecode++ - OP_CRSTAR;
-        minimize = (c & 1) != 0;
-        min = rep_min[c];                 /* Pick up values from tables; */
-        max = rep_max[c];                 /* zero for max => infinity */
-        if (max == 0) max = INT_MAX;
-        break;
-
-        case OP_CRRANGE:
-        case OP_CRMINRANGE:
-        minimize = (*ecode == OP_CRMINRANGE);
-        min = (ecode[1] << 8) + ecode[2];
-        max = (ecode[3] << 8) + ecode[4];
-        if (max == 0) max = INT_MAX;
-        ecode += 5;
-        break;
-
-        default:               /* No repeat follows */
-        if (!match_ref(offset, eptr, length, md, ims)) return FALSE;
-        eptr += length;
-        continue;              /* With the main loop */
-        }
-
-      /* If the length of the reference is zero, just continue with the
-      main loop. */
-
-      if (length == 0) continue;
-
-      /* First, ensure the minimum number of matches are present. We get back
-      the length of the reference string explicitly rather than passing the
-      address of eptr, so that eptr can be a register variable. */
-
-      for (i = 1; i <= min; i++)
-        {
-        if (!match_ref(offset, eptr, length, md, ims)) return FALSE;
-        eptr += length;
-        }
-
-      /* If min = max, continue at the same level without recursion.
-      They are not both allowed to be zero. */
-
-      if (min == max) continue;
-
-      /* If minimizing, keep trying and advancing the pointer */
-
-      if (minimize)
-        {
-        for (i = min;; i++)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          if (i >= max || !match_ref(offset, eptr, length, md, ims))
-            return FALSE;
-          eptr += length;
-          }
-        /* Control never gets here */
-        }
-
-      /* If maximizing, find the longest string and work backwards */
-
-      else
-        {
-        const uschar *pp = eptr;
-        for (i = min; i < max; i++)
-          {
-          if (!match_ref(offset, eptr, length, md, ims)) break;
-          eptr += length;
-          }
-        while (eptr >= pp)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          eptr -= length;
-          }
-        return FALSE;
-        }
-      }
-    /* Control never gets here */
-
-
-
-    /* Match a character class, possibly repeatedly. Look past the end of the
-    item to see if there is repeat information following. Then obey similar
-    code to character type repeats - written out again for speed. */
-
-    case OP_CLASS:
-      {
-      const uschar *data = ecode + 1;  /* Save for matching */
-      ecode += 33;                     /* Advance past the item */
-
-      switch (*ecode)
-        {
-        case OP_CRSTAR:
-        case OP_CRMINSTAR:
-        case OP_CRPLUS:
-        case OP_CRMINPLUS:
-        case OP_CRQUERY:
-        case OP_CRMINQUERY:
-        c = *ecode++ - OP_CRSTAR;
-        minimize = (c & 1) != 0;
-        min = rep_min[c];                 /* Pick up values from tables; */
-        max = rep_max[c];                 /* zero for max => infinity */
-        if (max == 0) max = INT_MAX;
-        break;
-
-        case OP_CRRANGE:
-        case OP_CRMINRANGE:
-        minimize = (*ecode == OP_CRMINRANGE);
-        min = (ecode[1] << 8) + ecode[2];
-        max = (ecode[3] << 8) + ecode[4];
-        if (max == 0) max = INT_MAX;
-        ecode += 5;
-        break;
-
-        default:               /* No repeat follows */
-        min = max = 1;
-        break;
-        }
-
-      /* First, ensure the minimum number of matches are present. */
-
-      for (i = 1; i <= min; i++)
-        {
-        if (eptr >= md->end_subject) return FALSE;
-        GETCHARINC(c, eptr)         /* Get character; increment eptr */
-
-#ifdef SUPPORT_UTF8
-        /* We do not yet support class members > 255 */
-        if (c > 255) return FALSE;
-#endif
-
-        if ((data[c/8] & (1 << (c&7))) != 0) continue;
-        return FALSE;
-        }
-
-      /* If max == min we can continue with the main loop without the
-      need to recurse. */
-
-      if (min == max) continue;
-
-      /* If minimizing, keep testing the rest of the expression and advancing
-      the pointer while it matches the class. */
-
-      if (minimize)
-        {
-        for (i = min;; i++)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          if (i >= max || eptr >= md->end_subject) return FALSE;
-          GETCHARINC(c, eptr)       /* Get character; increment eptr */
-
-#ifdef SUPPORT_UTF8
-          /* We do not yet support class members > 255 */
-          if (c > 255) return FALSE;
-#endif
-          if ((data[c/8] & (1 << (c&7))) != 0) continue;
-          return FALSE;
-          }
-        /* Control never gets here */
-        }
-
-      /* If maximizing, find the longest possible run, then work backwards. */
-
-      else
-        {
-        const uschar *pp = eptr;
-        int len = 1;
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject) break;
-          GETCHARLEN(c, eptr, len)  /* Get character, set length if UTF-8 */
-
-#ifdef SUPPORT_UTF8
-          /* We do not yet support class members > 255 */
-          if (c > 255) break;
-#endif
-          if ((data[c/8] & (1 << (c&7))) == 0) break;
-          eptr += len;
-          }
-
-        while (eptr >= pp)
-          {
-          if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-
-#ifdef SUPPORT_UTF8
-          BACKCHAR(eptr)
-#endif
-          }
-        return FALSE;
-        }
-      }
-    /* Control never gets here */
-
-    /* Match a run of characters */
-
-    case OP_CHARS:
-      {
-      register int length = ecode[1];
-      ecode += 2;
-
-#ifdef DEBUG    /* Sigh. Some compilers never learn. */
-      if (eptr >= md->end_subject)
-        printf("matching subject <null> against pattern ");
-      else
-        {
-        printf("matching subject ");
-        pchars(eptr, length, TRUE, md);
-        printf(" against pattern ");
-        }
-      pchars(ecode, length, FALSE, md);
-      printf("\n");
-#endif
-
-      if (length > md->end_subject - eptr) return FALSE;
-      if ((ims & PCRE_CASELESS) != 0)
-        {
-        while (length-- > 0)
-          if (md->lcc[*ecode++] != md->lcc[*eptr++])
-            return FALSE;
-        }
-      else
-        {
-        while (length-- > 0) if (*ecode++ != *eptr++) return FALSE;
-        }
-      }
-    break;
-
-    /* Match a single character repeatedly; different opcodes share code. */
-
-    case OP_EXACT:
-    min = max = (ecode[1] << 8) + ecode[2];
-    ecode += 3;
-    goto REPEATCHAR;
-
-    case OP_UPTO:
-    case OP_MINUPTO:
-    min = 0;
-    max = (ecode[1] << 8) + ecode[2];
-    minimize = *ecode == OP_MINUPTO;
-    ecode += 3;
-    goto REPEATCHAR;
-
-    case OP_STAR:
-    case OP_MINSTAR:
-    case OP_PLUS:
-    case OP_MINPLUS:
-    case OP_QUERY:
-    case OP_MINQUERY:
-    c = *ecode++ - OP_STAR;
-    minimize = (c & 1) != 0;
-    min = rep_min[c];                 /* Pick up values from tables; */
-    max = rep_max[c];                 /* zero for max => infinity */
-    if (max == 0) max = INT_MAX;
-
-    /* Common code for all repeated single-character matches. We can give
-    up quickly if there are fewer than the minimum number of characters left in
-    the subject. */
-
-    REPEATCHAR:
-    if (min > md->end_subject - eptr) return FALSE;
-    c = *ecode++;
-
-    /* The code is duplicated for the caseless and caseful cases, for speed,
-    since matching characters is likely to be quite common. First, ensure the
-    minimum number of matches are present. If min = max, continue at the same
-    level without recursing. Otherwise, if minimizing, keep trying the rest of
-    the expression and advancing one matching character if failing, up to the
-    maximum. Alternatively, if maximizing, find the maximum number of
-    characters and work backwards. */
-
-    DPRINTF(("matching %c{%d,%d} against subject %.*s\n", c, min, max,
-      max, eptr));
-
-    if ((ims & PCRE_CASELESS) != 0)
-      {
-      c = md->lcc[c];
-      for (i = 1; i <= min; i++)
-        if (c != md->lcc[*eptr++]) return FALSE;
-      if (min == max) continue;
-      if (minimize)
-        {
-        for (i = min;; i++)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          if (i >= max || eptr >= md->end_subject ||
-              c != md->lcc[*eptr++])
-            return FALSE;
-          }
-        /* Control never gets here */
-        }
-      else
-        {
-        const uschar *pp = eptr;
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || c != md->lcc[*eptr]) break;
-          eptr++;
-          }
-        while (eptr >= pp)
-          if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-        return FALSE;
-        }
-      /* Control never gets here */
-      }
-
-    /* Caseful comparisons */
-
-    else
-      {
-      for (i = 1; i <= min; i++) if (c != *eptr++) return FALSE;
-      if (min == max) continue;
-      if (minimize)
-        {
-        for (i = min;; i++)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          if (i >= max || eptr >= md->end_subject || c != *eptr++) return FALSE;
-          }
-        /* Control never gets here */
-        }
-      else
-        {
-        const uschar *pp = eptr;
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || c != *eptr) break;
-          eptr++;
-          }
-        while (eptr >= pp)
-         if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0))
-           return TRUE;
-        return FALSE;
-        }
-      }
-    /* Control never gets here */
-
-    /* Match a negated single character */
-
-    case OP_NOT:
-    if (eptr >= md->end_subject) return FALSE;
-    ecode++;
-    if ((ims & PCRE_CASELESS) != 0)
-      {
-      if (md->lcc[*ecode++] == md->lcc[*eptr++]) return FALSE;
-      }
-    else
-      {
-      if (*ecode++ == *eptr++) return FALSE;
-      }
-    break;
-
-    /* Match a negated single character repeatedly. This is almost a repeat of
-    the code for a repeated single character, but I haven't found a nice way of
-    commoning these up that doesn't require a test of the positive/negative
-    option for each character match. Maybe that wouldn't add very much to the
-    time taken, but character matching *is* what this is all about... */
-
-    case OP_NOTEXACT:
-    min = max = (ecode[1] << 8) + ecode[2];
-    ecode += 3;
-    goto REPEATNOTCHAR;
-
-    case OP_NOTUPTO:
-    case OP_NOTMINUPTO:
-    min = 0;
-    max = (ecode[1] << 8) + ecode[2];
-    minimize = *ecode == OP_NOTMINUPTO;
-    ecode += 3;
-    goto REPEATNOTCHAR;
-
-    case OP_NOTSTAR:
-    case OP_NOTMINSTAR:
-    case OP_NOTPLUS:
-    case OP_NOTMINPLUS:
-    case OP_NOTQUERY:
-    case OP_NOTMINQUERY:
-    c = *ecode++ - OP_NOTSTAR;
-    minimize = (c & 1) != 0;
-    min = rep_min[c];                 /* Pick up values from tables; */
-    max = rep_max[c];                 /* zero for max => infinity */
-    if (max == 0) max = INT_MAX;
-
-    /* Common code for all repeated single-character matches. We can give
-    up quickly if there are fewer than the minimum number of characters left in
-    the subject. */
-
-    REPEATNOTCHAR:
-    if (min > md->end_subject - eptr) return FALSE;
-    c = *ecode++;
-
-    /* The code is duplicated for the caseless and caseful cases, for speed,
-    since matching characters is likely to be quite common. First, ensure the
-    minimum number of matches are present. If min = max, continue at the same
-    level without recursing. Otherwise, if minimizing, keep trying the rest of
-    the expression and advancing one matching character if failing, up to the
-    maximum. Alternatively, if maximizing, find the maximum number of
-    characters and work backwards. */
-
-    DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", c, min, max,
-      max, eptr));
-
-    if ((ims & PCRE_CASELESS) != 0)
-      {
-      c = md->lcc[c];
-      for (i = 1; i <= min; i++)
-        if (c == md->lcc[*eptr++]) return FALSE;
-      if (min == max) continue;
-      if (minimize)
-        {
-        for (i = min;; i++)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          if (i >= max || eptr >= md->end_subject ||
-              c == md->lcc[*eptr++])
-            return FALSE;
-          }
-        /* Control never gets here */
-        }
-      else
-        {
-        const uschar *pp = eptr;
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || c == md->lcc[*eptr]) break;
-          eptr++;
-          }
-        while (eptr >= pp)
-          if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-        return FALSE;
-        }
-      /* Control never gets here */
-      }
-
-    /* Caseful comparisons */
-
-    else
-      {
-      for (i = 1; i <= min; i++) if (c == *eptr++) return FALSE;
-      if (min == max) continue;
-      if (minimize)
-        {
-        for (i = min;; i++)
-          {
-          if (match(eptr, ecode, offset_top, md, ims, eptrb, 0))
-            return TRUE;
-          if (i >= max || eptr >= md->end_subject || c == *eptr++) return FALSE;
-          }
-        /* Control never gets here */
-        }
-      else
-        {
-        const uschar *pp = eptr;
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || c == *eptr) break;
-          eptr++;
-          }
-        while (eptr >= pp)
-         if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0))
-           return TRUE;
-        return FALSE;
-        }
-      }
-    /* Control never gets here */
-
-    /* Match a single character type repeatedly; several different opcodes
-    share code. This is very similar to the code for single characters, but we
-    repeat it in the interests of efficiency. */
-
-    case OP_TYPEEXACT:
-    min = max = (ecode[1] << 8) + ecode[2];
-    minimize = TRUE;
-    ecode += 3;
-    goto REPEATTYPE;
-
-    case OP_TYPEUPTO:
-    case OP_TYPEMINUPTO:
-    min = 0;
-    max = (ecode[1] << 8) + ecode[2];
-    minimize = *ecode == OP_TYPEMINUPTO;
-    ecode += 3;
-    goto REPEATTYPE;
-
-    case OP_TYPESTAR:
-    case OP_TYPEMINSTAR:
-    case OP_TYPEPLUS:
-    case OP_TYPEMINPLUS:
-    case OP_TYPEQUERY:
-    case OP_TYPEMINQUERY:
-    c = *ecode++ - OP_TYPESTAR;
-    minimize = (c & 1) != 0;
-    min = rep_min[c];                 /* Pick up values from tables; */
-    max = rep_max[c];                 /* zero for max => infinity */
-    if (max == 0) max = INT_MAX;
-
-    /* Common code for all repeated single character type matches */
-
-    REPEATTYPE:
-    ctype = *ecode++;      /* Code for the character type */
-
-    /* First, ensure the minimum number of matches are present. Use inline
-    code for maximizing the speed, and do the type test once at the start
-    (i.e. keep it out of the loop). Also we can test that there are at least
-    the minimum number of bytes before we start, except when doing '.' in
-    UTF8 mode. Leave the test in in all cases; in the special case we have
-    to test after each character. */
-
-    if (min > md->end_subject - eptr) return FALSE;
-    if (min > 0) switch(ctype)
-      {
-      case OP_ANY:
-#ifdef SUPPORT_UTF8
-      if (md->utf8)
-        {
-        for (i = 1; i <= min; i++)
-          {
-          if (eptr >= md->end_subject ||
-             (*eptr++ == '\n' && (ims & PCRE_DOTALL) == 0))
-            return FALSE;
-          while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;
-          }
-        break;
-        }
-#endif
-      /* Non-UTF8 can be faster */
-      if ((ims & PCRE_DOTALL) == 0)
-        { for (i = 1; i <= min; i++) if (*eptr++ == '\n') return FALSE; }
-      else eptr += min;
-      break;
-
-      case OP_NOT_DIGIT:
-      for (i = 1; i <= min; i++)
-        if ((md->ctypes[*eptr++] & ctype_digit) != 0) return FALSE;
-      break;
-
-      case OP_DIGIT:
-      for (i = 1; i <= min; i++)
-        if ((md->ctypes[*eptr++] & ctype_digit) == 0) return FALSE;
-      break;
-
-      case OP_NOT_WHITESPACE:
-      for (i = 1; i <= min; i++)
-        if ((md->ctypes[*eptr++] & ctype_space) != 0) return FALSE;
-      break;
-
-      case OP_WHITESPACE:
-      for (i = 1; i <= min; i++)
-        if ((md->ctypes[*eptr++] & ctype_space) == 0) return FALSE;
-      break;
-
-      case OP_NOT_WORDCHAR:
-      for (i = 1; i <= min; i++)
-        if ((md->ctypes[*eptr++] & ctype_word) != 0)
-          return FALSE;
-      break;
-
-      case OP_WORDCHAR:
-      for (i = 1; i <= min; i++)
-        if ((md->ctypes[*eptr++] & ctype_word) == 0)
-          return FALSE;
-      break;
-      }
-
-    /* If min = max, continue at the same level without recursing */
-
-    if (min == max) continue;
-
-    /* If minimizing, we have to test the rest of the pattern before each
-    subsequent match. */
-
-    if (minimize)
-      {
-      for (i = min;; i++)
-        {
-        if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) return TRUE;
-        if (i >= max || eptr >= md->end_subject) return FALSE;
-
-        c = *eptr++;
-        switch(ctype)
-          {
-          case OP_ANY:
-          if ((ims & PCRE_DOTALL) == 0 && c == '\n') return FALSE;
-#ifdef SUPPORT_UTF8
-          if (md->utf8)
-            while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;
-#endif
-          break;
-
-          case OP_NOT_DIGIT:
-          if ((md->ctypes[c] & ctype_digit) != 0) return FALSE;
-          break;
-
-          case OP_DIGIT:
-          if ((md->ctypes[c] & ctype_digit) == 0) return FALSE;
-          break;
-
-          case OP_NOT_WHITESPACE:
-          if ((md->ctypes[c] & ctype_space) != 0) return FALSE;
-          break;
-
-          case OP_WHITESPACE:
-          if  ((md->ctypes[c] & ctype_space) == 0) return FALSE;
-          break;
-
-          case OP_NOT_WORDCHAR:
-          if ((md->ctypes[c] & ctype_word) != 0) return FALSE;
-          break;
-
-          case OP_WORDCHAR:
-          if ((md->ctypes[c] & ctype_word) == 0) return FALSE;
-          break;
-          }
-        }
-      /* Control never gets here */
-      }
-
-    /* If maximizing it is worth using inline code for speed, doing the type
-    test once at the start (i.e. keep it out of the loop). */
-
-    else
-      {
-      const uschar *pp = eptr;
-      switch(ctype)
-        {
-        case OP_ANY:
-
-        /* Special code is required for UTF8, but when the maximum is unlimited
-        we don't need it. */
-
-#ifdef SUPPORT_UTF8
-        if (md->utf8 && max < INT_MAX)
-          {
-          if ((ims & PCRE_DOTALL) == 0)
-            {
-            for (i = min; i < max; i++)
-              {
-              if (eptr >= md->end_subject || *eptr++ == '\n') break;
-              while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;
-              }
-            }
-          else
-            {
-            for (i = min; i < max; i++)
-              {
-              eptr++;
-              while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++;
-              }
-            }
-          break;
-          }
-#endif
-        /* Non-UTF8 can be faster */
-        if ((ims & PCRE_DOTALL) == 0)
-          {
-          for (i = min; i < max; i++)
-            {
-            if (eptr >= md->end_subject || *eptr == '\n') break;
-            eptr++;
-            }
-          }
-        else
-          {
-          c = max - min;
-          if (c > md->end_subject - eptr) c = md->end_subject - eptr;
-          eptr += c;
-          }
-        break;
-
-        case OP_NOT_DIGIT:
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) != 0)
-            break;
-          eptr++;
-          }
-        break;
-
-        case OP_DIGIT:
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) == 0)
-            break;
-          eptr++;
-          }
-        break;
-
-        case OP_NOT_WHITESPACE:
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) != 0)
-            break;
-          eptr++;
-          }
-        break;
-
-        case OP_WHITESPACE:
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) == 0)
-            break;
-          eptr++;
-          }
-        break;
-
-        case OP_NOT_WORDCHAR:
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) != 0)
-            break;
-          eptr++;
-          }
-        break;
-
-        case OP_WORDCHAR:
-        for (i = min; i < max; i++)
-          {
-          if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) == 0)
-            break;
-          eptr++;
-          }
-        break;
-        }
-
-      while (eptr >= pp)
-        {
-        if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0))
-          return TRUE;
-#ifdef SUPPORT_UTF8
-        if (md->utf8)
-          while (eptr > pp && (*eptr & 0xc0) == 0x80) eptr--;
-#endif
-        }
-      return FALSE;
-      }
-    /* Control never gets here */
-
-    /* There's been some horrible disaster. */
-
-    default:
-    DPRINTF(("Unknown opcode %d\n", *ecode));
-    md->errorcode = PCRE_ERROR_UNKNOWN_NODE;
-    return FALSE;
-    }
-
-  /* Do not stick any code in here without much thought; it is assumed
-  that "continue" in the code above comes out to here to repeat the main
-  loop. */
-
-  }             /* End of main loop */
-/* Control never reaches here */
-}
-
-
-
-
-/*************************************************
-*         Execute a Regular Expression           *
-*************************************************/
-
-/* This function applies a compiled re to a subject string and picks out
-portions of the string if it matches. Two elements in the vector are set for
-each substring: the offsets to the start and end of the substring.
-
-Arguments:
-  external_re     points to the compiled expression
-  external_extra  points to "hints" from pcre_study() or is NULL
-  subject         points to the subject string
-  length          length of subject string (may contain binary zeros)
-  start_offset    where to start in the subject string
-  options         option bits
-  offsets         points to a vector of ints to be filled in with offsets
-  offsetcount     the number of elements in the vector
-
-Returns:          > 0 => success; value is the number of elements filled in
-                  = 0 => success, but offsets is not big enough
-                   -1 => failed to match
-                 < -1 => some kind of unexpected problem
-*/
-
-int
-pcre_exec(const pcre *external_re, const pcre_extra *external_extra,
-  const char *subject, int length, int start_offset, int options, int *offsets,
-  int offsetcount)
-{
-int resetcount, ocount;
-int first_char = -1;
-int req_char = -1;
-int req_char2 = -1;
-unsigned long int ims = 0;
-match_data match_block;
-const uschar *start_bits = NULL;
-const uschar *start_match = (const uschar *)subject + start_offset;
-const uschar *end_subject;
-const uschar *req_char_ptr = start_match - 1;
-const real_pcre *re = (const real_pcre *)external_re;
-const real_pcre_extra *extra = (const real_pcre_extra *)external_extra;
-BOOL using_temporary_offsets = FALSE;
-BOOL anchored = ((re->options | options) & PCRE_ANCHORED) != 0;
-BOOL startline = (re->options & PCRE_STARTLINE) != 0;
-
-if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION;
-
-if (re == NULL || subject == NULL ||
-   (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL;
-if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC;
-
-match_block.start_pattern = re->code;
-match_block.start_subject = (const uschar *)subject;
-match_block.end_subject = match_block.start_subject + length;
-end_subject = match_block.end_subject;
-
-match_block.endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0;
-match_block.utf8 = (re->options & PCRE_UTF8) != 0;
-
-match_block.notbol = (options & PCRE_NOTBOL) != 0;
-match_block.noteol = (options & PCRE_NOTEOL) != 0;
-match_block.notempty = (options & PCRE_NOTEMPTY) != 0;
-
-match_block.errorcode = PCRE_ERROR_NOMATCH;     /* Default error */
-
-match_block.lcc = re->tables + lcc_offset;
-match_block.ctypes = re->tables + ctypes_offset;
-
-/* The ims options can vary during the matching as a result of the presence
-of (?ims) items in the pattern. They are kept in a local variable so that
-restoring at the exit of a group is easy. */
-
-ims = re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL);
-
-/* If the expression has got more back references than the offsets supplied can
-hold, we get a temporary bit of working store to use during the matching.
-Otherwise, we can use the vector supplied, rounding down its size to a multiple
-of 3. */
-
-ocount = offsetcount - (offsetcount % 3);
-
-if (re->top_backref > 0 && re->top_backref >= ocount/3)
-  {
-  ocount = re->top_backref * 3 + 3;
-  match_block.offset_vector = (int *)(pcre_malloc)(ocount * sizeof(int));
-  if (match_block.offset_vector == NULL) return PCRE_ERROR_NOMEMORY;
-  using_temporary_offsets = TRUE;
-  DPRINTF(("Got memory to hold back references\n"));
-  }
-else match_block.offset_vector = offsets;
-
-match_block.offset_end = ocount;
-match_block.offset_max = (2*ocount)/3;
-match_block.offset_overflow = FALSE;
-
-/* Compute the minimum number of offsets that we need to reset each time. Doing
-this makes a huge difference to execution time when there aren't many brackets
-in the pattern. */
-
-resetcount = 2 + re->top_bracket * 2;
-if (resetcount > offsetcount) resetcount = ocount;
-
-/* Reset the working variable associated with each extraction. These should
-never be used unless previously set, but they get saved and restored, and so we
-initialize them to avoid reading uninitialized locations. */
-
-if (match_block.offset_vector != NULL)
-  {
-  register int *iptr = match_block.offset_vector + ocount;
-  register int *iend = iptr - resetcount/2 + 1;
-  while (--iptr >= iend) *iptr = -1;
-  }
-
-/* Set up the first character to match, if available. The first_char value is
-never set for an anchored regular expression, but the anchoring may be forced
-at run time, so we have to test for anchoring. The first char may be unset for
-an unanchored pattern, of course. If there's no first char and the pattern was
-studied, there may be a bitmap of possible first characters. */
-
-if (!anchored)
-  {
-  if ((re->options & PCRE_FIRSTSET) != 0)
-    {
-    first_char = re->first_char;
-    if ((ims & PCRE_CASELESS) != 0) first_char = match_block.lcc[first_char];
-    }
-  else
-    if (!startline && extra != NULL &&
-      (extra->options & PCRE_STUDY_MAPPED) != 0)
-        start_bits = extra->start_bits;
-  }
-
-/* For anchored or unanchored matches, there may be a "last known required
-character" set. If the PCRE_CASELESS is set, implying that the match starts
-caselessly, or if there are any changes of this flag within the regex, set up
-both cases of the character. Otherwise set the two values the same, which will
-avoid duplicate testing (which takes significant time). This covers the vast
-majority of cases. It will be suboptimal when the case flag changes in a regex
-and the required character in fact is caseful. */
-
-if ((re->options & PCRE_REQCHSET) != 0)
-  {
-  req_char = re->req_char;
-  req_char2 = ((re->options & (PCRE_CASELESS | PCRE_ICHANGED)) != 0)?
-    (re->tables + fcc_offset)[req_char] : req_char;
-  }
-
-/* Loop for handling unanchored repeated matching attempts; for anchored regexs
-the loop runs just once. */
-
-do
-  {
-  int rc;
-  register int *iptr = match_block.offset_vector;
-  register int *iend = iptr + resetcount;
-
-  /* Reset the maximum number of extractions we might see. */
-
-  while (iptr < iend) *iptr++ = -1;
-
-  /* Advance to a unique first char if possible */
-
-  if (first_char >= 0)
-    {
-    if ((ims & PCRE_CASELESS) != 0)
-      while (start_match < end_subject &&
-             match_block.lcc[*start_match] != first_char)
-        start_match++;
-    else
-      while (start_match < end_subject && *start_match != first_char)
-        start_match++;
-    }
-
-  /* Or to just after \n for a multiline match if possible */
-
-  else if (startline)
-    {
-    if (start_match > match_block.start_subject + start_offset)
-      {
-      while (start_match < end_subject && start_match[-1] != '\n')
-        start_match++;
-      }
-    }
-
-  /* Or to a non-unique first char after study */
-
-  else if (start_bits != NULL)
-    {
-    while (start_match < end_subject)
-      {
-      register int c = *start_match;
-      if ((start_bits[c/8] & (1 << (c&7))) == 0) start_match++; else break;
-      }
-    }
-
-#ifdef DEBUG  /* Sigh. Some compilers never learn. */
-  printf(">>>> Match against: ");
-  pchars(start_match, end_subject - start_match, TRUE, &match_block);
-  printf("\n");
-#endif
-
-  /* If req_char is set, we know that that character must appear in the subject
-  for the match to succeed. If the first character is set, req_char must be
-  later in the subject; otherwise the test starts at the match point. This
-  optimization can save a huge amount of backtracking in patterns with nested
-  unlimited repeats that aren't going to match. We don't know what the state of
-  case matching may be when this character is hit, so test for it in both its
-  cases if necessary. However, the different cased versions will not be set up
-  unless PCRE_CASELESS was given or the casing state changes within the regex.
-  Writing separate code makes it go faster, as does using an autoincrement and
-  backing off on a match. */
-
-  if (req_char >= 0)
-    {
-    register const uschar *p = start_match + ((first_char >= 0)? 1 : 0);
-
-    /* We don't need to repeat the search if we haven't yet reached the
-    place we found it at last time. */
-
-    if (p > req_char_ptr)
-      {
-      /* Do a single test if no case difference is set up */
-
-      if (req_char == req_char2)
-        {
-        while (p < end_subject)
-          {
-          if (*p++ == req_char) { p--; break; }
-          }
-        }
-
-      /* Otherwise test for either case */
-
-      else
-        {
-        while (p < end_subject)
-          {
-          register int pp = *p++;
-          if (pp == req_char || pp == req_char2) { p--; break; }
-          }
-        }
-
-      /* If we can't find the required character, break the matching loop */
-
-      if (p >= end_subject) break;
-
-      /* If we have found the required character, save the point where we
-      found it, so that we don't search again next time round the loop if
-      the start hasn't passed this character yet. */
-
-      req_char_ptr = p;
-      }
-    }
-
-  /* When a match occurs, substrings will be set for all internal extractions;
-  we just need to set up the whole thing as substring 0 before returning. If
-  there were too many extractions, set the return code to zero. In the case
-  where we had to get some local store to hold offsets for backreferences, copy
-  those back references that we can. In this case there need not be overflow
-  if certain parts of the pattern were not used. */
-
-  match_block.start_match = start_match;
-  if (!match(start_match, re->code, 2, &match_block, ims, NULL, match_isgroup))
-    continue;
-
-  /* Copy the offset information from temporary store if necessary */
-
-  if (using_temporary_offsets)
-    {
-    if (offsetcount >= 4)
-      {
-      memcpy(offsets + 2, match_block.offset_vector + 2,
-        (offsetcount - 2) * sizeof(int));
-      DPRINTF(("Copied offsets from temporary memory\n"));
-      }
-    if (match_block.end_offset_top > offsetcount)
-      match_block.offset_overflow = TRUE;
-
-    DPRINTF(("Freeing temporary memory\n"));
-    (pcre_free)(match_block.offset_vector);
-    }
-
-  rc = match_block.offset_overflow? 0 : match_block.end_offset_top/2;
-
-  if (match_block.offset_end < 2) rc = 0; else
-    {
-    offsets[0] = start_match - match_block.start_subject;
-    offsets[1] = match_block.end_match_ptr - match_block.start_subject;
-    }
-
-  DPRINTF((">>>> returning %d\n", rc));
-  return rc;
-  }
-
-/* This "while" is the end of the "do" above */
-
-while (!anchored &&
-       match_block.errorcode == PCRE_ERROR_NOMATCH &&
-       start_match++ < end_subject);
-
-if (using_temporary_offsets)
-  {
-  DPRINTF(("Freeing temporary memory\n"));
-  (pcre_free)(match_block.offset_vector);
-  }
-
-DPRINTF((">>>> returning %d\n", match_block.errorcode));
-
-return match_block.errorcode;
-}
-
-/* End of pcre.c */
diff --git a/external/privoxy/pcre/pcre.def b/external/privoxy/pcre/pcre.def
deleted file mode 100644
index 0e8cf3f..0000000
--- a/external/privoxy/pcre/pcre.def
+++ /dev/null
@@ -1,19 +0,0 @@
-EXPORTS
-
-pcre_malloc DATA
-pcre_free DATA
-
-pcre_compile
-pcre_copy_substring
-pcre_exec
-pcre_get_substring
-pcre_get_substring_list
-pcre_info
-pcre_maketables
-pcre_study
-pcre_version
-
-regcomp
-regexec
-regerror
-regfree
diff --git a/external/privoxy/pcre/pcre.h b/external/privoxy/pcre/pcre.h
deleted file mode 100644
index d27ba85..0000000
--- a/external/privoxy/pcre/pcre.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*************************************************
-*       Perl-Compatible Regular Expressions      *
-*************************************************/
-
-/* Copyright (c) 1997-2000 University of Cambridge */
-
-#ifndef _PCRE_H
-#define _PCRE_H
-
-/* The file pcre.h is build by "configure". Do not edit it; instead
-make changes to pcre.in. */
-
-#define PCRE_MAJOR 3
-#define PCRE_MINOR 4
-#define PCRE_DATE  22-Aug-2000
-
-/* Win32 uses DLL by default */
-
-#ifdef _WIN32
-# ifdef STATIC_PCRE
-#  define PCRE_DL_IMPORT
-# else
-#  define PCRE_DL_IMPORT __declspec(dllimport)
-# endif
-#else
-# define PCRE_DL_IMPORT
-#endif
-
-/* Have to include stdlib.h in order to ensure that size_t is defined;
-it is needed here for malloc. */
-
-#include <stdlib.h>
-
-/* Allow for C++ users */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Options */
-
-#define PCRE_CASELESS        0x0001
-#define PCRE_MULTILINE       0x0002
-#define PCRE_DOTALL          0x0004
-#define PCRE_EXTENDED        0x0008
-#define PCRE_ANCHORED        0x0010
-#define PCRE_DOLLAR_ENDONLY  0x0020
-#define PCRE_EXTRA           0x0040
-#define PCRE_NOTBOL          0x0080
-#define PCRE_NOTEOL          0x0100
-#define PCRE_UNGREEDY        0x0200
-#define PCRE_NOTEMPTY        0x0400
-#define PCRE_UTF8            0x0800
-
-/* Exec-time and get-time error codes */
-
-#define PCRE_ERROR_NOMATCH        (-1)
-#define PCRE_ERROR_NULL           (-2)
-#define PCRE_ERROR_BADOPTION      (-3)
-#define PCRE_ERROR_BADMAGIC       (-4)
-#define PCRE_ERROR_UNKNOWN_NODE   (-5)
-#define PCRE_ERROR_NOMEMORY       (-6)
-#define PCRE_ERROR_NOSUBSTRING    (-7)
-
-/* Request types for pcre_fullinfo() */
-
-#define PCRE_INFO_OPTIONS         0
-#define PCRE_INFO_SIZE            1
-#define PCRE_INFO_CAPTURECOUNT    2
-#define PCRE_INFO_BACKREFMAX      3
-#define PCRE_INFO_FIRSTCHAR       4
-#define PCRE_INFO_FIRSTTABLE      5
-#define PCRE_INFO_LASTLITERAL     6
-
-/* Types */
-
-typedef void pcre;
-typedef void pcre_extra;
-
-/* Store get and free functions. These can be set to alternative malloc/free
-functions if required. Some magic is required for Win32 DLL; it is null on
-other OS. */
-
-PCRE_DL_IMPORT extern void *(*pcre_malloc)(size_t);
-PCRE_DL_IMPORT extern void  (*pcre_free)(void *);
-
-#undef PCRE_DL_IMPORT
-
-/* Functions */
-
-extern pcre *pcre_compile(const char *, int, const char **, int *,
-              const unsigned char *);
-extern int  pcre_copy_substring(const char *, int *, int, int, char *, int);
-extern int  pcre_exec(const pcre *, const pcre_extra *, const char *,
-              int, int, int, int *, int);
-extern void pcre_free_substring(const char *);
-extern void pcre_free_substring_list(const char **);
-extern int  pcre_get_substring(const char *, int *, int, int, const char **);
-extern int  pcre_get_substring_list(const char *, int *, int, const char ***);
-extern int  pcre_info(const pcre *, int *, int *);
-extern int  pcre_fullinfo(const pcre *, const pcre_extra *, int, void *);
-extern unsigned const char *pcre_maketables(void);
-extern pcre_extra *pcre_study(const pcre *, int, const char **);
-extern const char *pcre_version(void);
-
-#ifdef __cplusplus
-}  /* extern "C" */
-#endif
-
-#endif /* End of pcre.h */
diff --git a/external/privoxy/pcre/pcre.in b/external/privoxy/pcre/pcre.in
deleted file mode 100644
index d698f40..0000000
--- a/external/privoxy/pcre/pcre.in
+++ /dev/null
@@ -1,110 +0,0 @@
-/*************************************************
-*       Perl-Compatible Regular Expressions      *
-*************************************************/
-
-/* Copyright (c) 1997-2000 University of Cambridge */
-
-#ifndef _PCRE_H
-#define _PCRE_H
-
-/* The file pcre.h is build by "configure". Do not edit it; instead
-make changes to pcre.in. */
-
-#define PCRE_MAJOR @PCRE_MAJOR@
-#define PCRE_MINOR @PCRE_MINOR@
-#define PCRE_DATE  @PCRE_DATE@
-
-/* Win32 uses DLL by default */
-
-#ifdef _WIN32
-# ifdef STATIC_PCRE
-#  define PCRE_DL_IMPORT
-# else
-#  define PCRE_DL_IMPORT __declspec(dllimport)
-# endif
-#else
-# define PCRE_DL_IMPORT
-#endif
-
-/* Have to include stdlib.h in order to ensure that size_t is defined;
-it is needed here for malloc. */
-
-#include <stdlib.h>
-
-/* Allow for C++ users */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Options */
-
-#define PCRE_CASELESS        0x0001
-#define PCRE_MULTILINE       0x0002
-#define PCRE_DOTALL          0x0004
-#define PCRE_EXTENDED        0x0008
-#define PCRE_ANCHORED        0x0010
-#define PCRE_DOLLAR_ENDONLY  0x0020
-#define PCRE_EXTRA           0x0040
-#define PCRE_NOTBOL          0x0080
-#define PCRE_NOTEOL          0x0100
-#define PCRE_UNGREEDY        0x0200
-#define PCRE_NOTEMPTY        0x0400
-#define PCRE_UTF8            0x0800
-
-/* Exec-time and get-time error codes */
-
-#define PCRE_ERROR_NOMATCH        (-1)
-#define PCRE_ERROR_NULL           (-2)
-#define PCRE_ERROR_BADOPTION      (-3)
-#define PCRE_ERROR_BADMAGIC       (-4)
-#define PCRE_ERROR_UNKNOWN_NODE   (-5)
-#define PCRE_ERROR_NOMEMORY       (-6)
-#define PCRE_ERROR_NOSUBSTRING    (-7)
-
-/* Request types for pcre_fullinfo() */
-
-#define PCRE_INFO_OPTIONS         0
-#define PCRE_INFO_SIZE            1
-#define PCRE_INFO_CAPTURECOUNT    2
-#define PCRE_INFO_BACKREFMAX      3
-#define PCRE_INFO_FIRSTCHAR       4
-#define PCRE_INFO_FIRSTTABLE      5
-#define PCRE_INFO_LASTLITERAL     6
-
-/* Types */
-
-typedef void pcre;
-typedef void pcre_extra;
-
-/* Store get and free functions. These can be set to alternative malloc/free
-functions if required. Some magic is required for Win32 DLL; it is null on
-other OS. */
-
-PCRE_DL_IMPORT extern void *(*pcre_malloc)(size_t);
-PCRE_DL_IMPORT extern void  (*pcre_free)(void *);
-
-#undef PCRE_DL_IMPORT
-
-/* Functions */
-
-extern pcre *pcre_compile(const char *, int, const char **, int *,
-              const unsigned char *);
-extern int  pcre_copy_substring(const char *, int *, int, int, char *, int);
-extern int  pcre_exec(const pcre *, const pcre_extra *, const char *,
-              int, int, int, int *, int);
-extern void pcre_free_substring(const char *);
-extern void pcre_free_substring_list(const char **);
-extern int  pcre_get_substring(const char *, int *, int, int, const char **);
-extern int  pcre_get_substring_list(const char *, int *, int, const char ***);
-extern int  pcre_info(const pcre *, int *, int *);
-extern int  pcre_fullinfo(const pcre *, const pcre_extra *, int, void *);
-extern unsigned const char *pcre_maketables(void);
-extern pcre_extra *pcre_study(const pcre *, int, const char **);
-extern const char *pcre_version(void);
-
-#ifdef __cplusplus
-}  /* extern "C" */
-#endif
-
-#endif /* End of pcre.h */
diff --git a/external/privoxy/pcre/pcregrep.c b/external/privoxy/pcre/pcregrep.c
deleted file mode 100644
index e8c934e..0000000
--- a/external/privoxy/pcre/pcregrep.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*************************************************
-*               pcregrep program                 *
-*************************************************/
-
-/* This is a grep program that uses the PCRE regular expression library to do
-its pattern matching. */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include "config.h"
-#include "pcre.h"
-
-#define FALSE 0
-#define TRUE 1
-
-typedef int BOOL;
-
-
-
-/*************************************************
-*               Global variables                 *
-*************************************************/
-
-static pcre *pattern;
-static pcre_extra *hints;
-
-static BOOL count_only = FALSE;
-static BOOL filenames_only = FALSE;
-static BOOL invert = FALSE;
-static BOOL number = FALSE;
-static BOOL silent = FALSE;
-static BOOL whole_lines = FALSE;
-
-
-
-#if ! HAVE_STRERROR
-/*************************************************
-*     Provide strerror() for non-ANSI libraries  *
-*************************************************/
-
-/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
-in their libraries, but can provide the same facility by this simple
-alternative function. */
-
-extern int   sys_nerr;
-extern char *sys_errlist[];
-
-char *
-strerror(int n)
-{
-if (n < 0 || n >= sys_nerr) return "unknown error number";
-return sys_errlist[n];
-}
-#endif /* HAVE_STRERROR */
-
-
-
-/*************************************************
-*              Grep an individual file           *
-*************************************************/
-
-static int
-pcregrep(FILE *in, char *name)
-{
-int rc = 1;
-int linenumber = 0;
-int count = 0;
-int offsets[99];
-char buffer[BUFSIZ];
-
-while (fgets(buffer, sizeof(buffer), in) != NULL)
-  {
-  BOOL match;
-  int length = (int)strlen(buffer);
-  if (length > 0 && buffer[length-1] == '\n') buffer[--length] = 0;
-  linenumber++;
-
-  match = pcre_exec(pattern, hints, buffer, length, 0, 0, offsets, 99) >= 0;
-  if (match && whole_lines && offsets[1] != length) match = FALSE;
-
-  if (match != invert)
-    {
-    if (count_only) count++;
-
-    else if (filenames_only)
-      {
-      fprintf(stdout, "%s\n", (name == NULL)? "<stdin>" : name);
-      return 0;
-      }
-
-    else if (silent) return 0;
-
-    else
-      {
-      if (name != NULL) fprintf(stdout, "%s:", name);
-      if (number) fprintf(stdout, "%d:", linenumber);
-      fprintf(stdout, "%s\n", buffer);
-      }
-
-    rc = 0;
-    }
-  }
-
-if (count_only)
-  {
-  if (name != NULL) fprintf(stdout, "%s:", name);
-  fprintf(stdout, "%d\n", count);
-  }
-
-return rc;
-}
-
-
-
-
-/*************************************************
-*                Usage function                  *
-*************************************************/
-
-static int
-usage(int rc)
-{
-fprintf(stderr, "Usage: pcregrep [-Vchilnsvx] pattern [file] ...\n");
-return rc;
-}
-
-
-
-
-/*************************************************
-*                Main program                    *
-*************************************************/
-
-int
-main(int argc, char **argv)
-{
-int i;
-int rc = 1;
-int options = 0;
-int errptr;
-const char *error;
-BOOL filenames = TRUE;
-
-/* Process the options */
-
-for (i = 1; i < argc; i++)
-  {
-  char *s;
-  if (argv[i][0] != '-') break;
-  s = argv[i] + 1;
-  while (*s != 0)
-    {
-    switch (*s++)
-      {
-      case 'c': count_only = TRUE; break;
-      case 'h': filenames = FALSE; break;
-      case 'i': options |= PCRE_CASELESS; break;
-      case 'l': filenames_only = TRUE;
-      case 'n': number = TRUE; break;
-      case 's': silent = TRUE; break;
-      case 'v': invert = TRUE; break;
-      case 'x': whole_lines = TRUE; options |= PCRE_ANCHORED; break;
-
-      case 'V':
-      fprintf(stderr, "PCRE version %s\n", pcre_version());
-      break;
-
-      default:
-      fprintf(stderr, "pcregrep: unknown option %c\n", s[-1]);
-      return usage(2);
-      }
-    }
-  }
-
-/* There must be at least a regexp argument */
-
-if (i >= argc) return usage(0);
-
-/* Compile the regular expression. */
-
-pattern = pcre_compile(argv[i++], options, &error, &errptr, NULL);
-if (pattern == NULL)
-  {
-  fprintf(stderr, "pcregrep: error in regex at offset %d: %s\n", errptr, error);
-  return 2;
-  }
-
-/* Study the regular expression, as we will be running it may times */
-
-hints = pcre_study(pattern, 0, &error);
-if (error != NULL)
-  {
-  fprintf(stderr, "pcregrep: error while studing regex: %s\n", error);
-  return 2;
-  }
-
-/* If there are no further arguments, do the business on stdin and exit */
-
-if (i >= argc) return pcregrep(stdin, NULL);
-
-/* Otherwise, work through the remaining arguments as files. If there is only
-one, don't give its name on the output. */
-
-if (i == argc - 1) filenames = FALSE;
-if (filenames_only) filenames = TRUE;
-
-for (; i < argc; i++)
-  {
-  FILE *in = fopen(argv[i], "r");
-  if (in == NULL)
-    {
-    fprintf(stderr, "%s: failed to open: %s\n", argv[i], strerror(errno));
-    rc = 2;
-    }
-  else
-    {
-    int frc = pcregrep(in, filenames? argv[i] : NULL);
-    if (frc == 0 && rc == 1) rc = 0;
-    fclose(in);
-    }
-  }
-
-return rc;
-}
-
-/* End */
diff --git a/external/privoxy/pcre/pcreposix.c b/external/privoxy/pcre/pcreposix.c
deleted file mode 100644
index 519d2dd..0000000
--- a/external/privoxy/pcre/pcreposix.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/*
-This is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language. See
-the file Tech.Notes for some information on the internals.
-
-This module is a wrapper that provides a POSIX API to the underlying PCRE
-functions.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-*/
-
-#include "internal.h"
-#include "pcreposix.h"
-#include "stdlib.h"
-
-
-
-/* Corresponding tables of PCRE error messages and POSIX error codes. */
-
-static const char *estring[] = {
-  ERR1,  ERR2,  ERR3,  ERR4,  ERR5,  ERR6,  ERR7,  ERR8,  ERR9,  ERR10,
-  ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19, ERR20,
-  ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR29, ERR29, ERR30,
-  ERR31 };
-
-static int eint[] = {
-  REG_EESCAPE, /* "\\ at end of pattern" */
-  REG_EESCAPE, /* "\\c at end of pattern" */
-  REG_EESCAPE, /* "unrecognized character follows \\" */
-  REG_BADBR,   /* "numbers out of order in {} quantifier" */
-  REG_BADBR,   /* "number too big in {} quantifier" */
-  REG_EBRACK,  /* "missing terminating ] for character class" */
-  REG_ECTYPE,  /* "invalid escape sequence in character class" */
-  REG_ERANGE,  /* "range out of order in character class" */
-  REG_BADRPT,  /* "nothing to repeat" */
-  REG_BADRPT,  /* "operand of unlimited repeat could match the empty string" */
-  REG_ASSERT,  /* "internal error: unexpected repeat" */
-  REG_BADPAT,  /* "unrecognized character after (?" */
-  REG_ESIZE,   /* "too many capturing parenthesized sub-patterns" */
-  REG_EPAREN,  /* "missing )" */
-  REG_ESUBREG, /* "back reference to non-existent subpattern" */
-  REG_INVARG,  /* "erroffset passed as NULL" */
-  REG_INVARG,  /* "unknown option bit(s) set" */
-  REG_EPAREN,  /* "missing ) after comment" */
-  REG_ESIZE,   /* "too many sets of parentheses" */
-  REG_ESIZE,   /* "regular expression too large" */
-  REG_ESPACE,  /* "failed to get memory" */
-  REG_EPAREN,  /* "unmatched brackets" */
-  REG_ASSERT,  /* "internal error: code overflow" */
-  REG_BADPAT,  /* "unrecognized character after (?<" */
-  REG_BADPAT,  /* "lookbehind assertion is not fixed length" */
-  REG_BADPAT,  /* "malformed number after (?(" */
-  REG_BADPAT,  /* "conditional group containe more than two branches" */
-  REG_BADPAT,  /* "assertion expected after (?(" */
-  REG_BADPAT,  /* "(?p must be followed by )" */
-  REG_ECTYPE,  /* "unknown POSIX class name" */
-  REG_BADPAT,  /* "POSIX collating elements are not supported" */
-  REG_INVARG,  /* "this version of PCRE is not compiled with PCRE_UTF8 support" */
-  REG_BADPAT,  /* "characters with values > 255 are not yet supported in classes" */
-  REG_BADPAT,  /* "character value in \x{...} sequence is too large" */
-  REG_BADPAT   /* "invalid condition (?(0)" */
-};
-
-/* Table of texts corresponding to POSIX error codes */
-
-static const char *pstring[] = {
-  "",                                /* Dummy for value 0 */
-  "internal error",                  /* REG_ASSERT */
-  "invalid repeat counts in {}",     /* BADBR      */
-  "pattern error",                   /* BADPAT     */
-  "? * + invalid",                   /* BADRPT     */
-  "unbalanced {}",                   /* EBRACE     */
-  "unbalanced []",                   /* EBRACK     */
-  "collation error - not relevant",  /* ECOLLATE   */
-  "bad class",                       /* ECTYPE     */
-  "bad escape sequence",             /* EESCAPE    */
-  "empty expression",                /* EMPTY      */
-  "unbalanced ()",                   /* EPAREN     */
-  "bad range inside []",             /* ERANGE     */
-  "expression too big",              /* ESIZE      */
-  "failed to get memory",            /* ESPACE     */
-  "bad back reference",              /* ESUBREG    */
-  "bad argument",                    /* INVARG     */
-  "match failed"                     /* NOMATCH    */
-};
-
-
-
-
-/*************************************************
-*          Translate PCRE text code to int       *
-*************************************************/
-
-/* PCRE compile-time errors are given as strings defined as macros. We can just
-look them up in a table to turn them into POSIX-style error codes. */
-
-static int
-pcre_posix_error_code(const char *s)
-{
-size_t i;
-for (i = 0; i < sizeof(estring)/sizeof(char *); i++)
-  if (strcmp(s, estring[i]) == 0) return eint[i];
-return REG_ASSERT;
-}
-
-
-
-/*************************************************
-*          Translate error code to string        *
-*************************************************/
-
-size_t
-regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size)
-{
-const char *message, *addmessage;
-size_t length, addlength;
-
-message = (errcode >= (int)(sizeof(pstring)/sizeof(char *)))?
-  "unknown error code" : pstring[errcode];
-length = strlen(message) + 1;
-
-addmessage = " at offset ";
-addlength = (preg != NULL && (int)preg->re_erroffset != -1)?
-  strlen(addmessage) + 6 : 0;
-
-if (errbuf_size > 0)
-  {
-  if (addlength > 0 && errbuf_size >= length + addlength)
-    sprintf(errbuf, "%s%s%-6d", message, addmessage, (int)preg->re_erroffset);
-  else
-    {
-    strncpy(errbuf, message, errbuf_size - 1);
-    errbuf[errbuf_size-1] = 0;
-    }
-  }
-
-return length + addlength;
-}
-
-
-
-
-/*************************************************
-*           Free store held by a regex           *
-*************************************************/
-
-void
-regfree(regex_t *preg)
-{
-(pcre_free)(preg->re_pcre);
-}
-
-
-
-
-/*************************************************
-*            Compile a regular expression        *
-*************************************************/
-
-/*
-Arguments:
-  preg        points to a structure for recording the compiled expression
-  pattern     the pattern to compile
-  cflags      compilation flags
-
-Returns:      0 on success
-              various non-zero codes on failure
-*/
-
-int
-regcomp(regex_t *preg, const char *pattern, int cflags)
-{
-const char *errorptr;
-int erroffset;
-int options = 0;
-
-if ((cflags & REG_ICASE) != 0) options |= PCRE_CASELESS;
-if ((cflags & REG_NEWLINE) != 0) options |= PCRE_MULTILINE;
-
-preg->re_pcre = pcre_compile(pattern, options, &errorptr, &erroffset, NULL);
-preg->re_erroffset = erroffset;
-
-if (preg->re_pcre == NULL) return pcre_posix_error_code(errorptr);
-
-preg->re_nsub = pcre_info(preg->re_pcre, NULL, NULL);
-return 0;
-}
-
-
-
-
-/*************************************************
-*              Match a regular expression        *
-*************************************************/
-
-/* Unfortunately, PCRE requires 3 ints of working space for each captured
-substring, so we have to get and release working store instead of just using
-the POSIX structures as was done in earlier releases when PCRE needed only 2
-ints. */
-
-int
-regexec(regex_t *preg, const char *string, size_t nmatch,
-  regmatch_t pmatch[], int eflags)
-{
-int rc;
-int options = 0;
-int *ovector = NULL;
-
-if ((eflags & REG_NOTBOL) != 0) options |= PCRE_NOTBOL;
-if ((eflags & REG_NOTEOL) != 0) options |= PCRE_NOTEOL;
-
-preg->re_erroffset = (size_t)(-1);   /* Only has meaning after compile */
-
-if (nmatch > 0)
-  {
-  ovector = (int *)malloc(sizeof(int) * nmatch * 3);
-  if (ovector == NULL) return REG_ESPACE;
-  }
-
-rc = pcre_exec(preg->re_pcre, NULL, string, (int)strlen(string), 0, options,
-  ovector, nmatch * 3);
-
-if (rc == 0) rc = nmatch;    /* All captured slots were filled in */
-
-if (rc >= 0)
-  {
-  size_t i;
-  for (i = 0; i < (size_t)rc; i++)
-    {
-    pmatch[i].rm_so = ovector[i*2];
-    pmatch[i].rm_eo = ovector[i*2+1];
-    }
-  if (ovector != NULL) free(ovector);
-  for (; i < nmatch; i++) pmatch[i].rm_so = pmatch[i].rm_eo = -1;
-  return 0;
-  }
-
-else
-  {
-  if (ovector != NULL) free(ovector);
-  switch(rc)
-    {
-    case PCRE_ERROR_NOMATCH: return REG_NOMATCH;
-    case PCRE_ERROR_NULL: return REG_INVARG;
-    case PCRE_ERROR_BADOPTION: return REG_INVARG;
-    case PCRE_ERROR_BADMAGIC: return REG_INVARG;
-    case PCRE_ERROR_UNKNOWN_NODE: return REG_ASSERT;
-    case PCRE_ERROR_NOMEMORY: return REG_ESPACE;
-    default: return REG_ASSERT;
-    }
-  }
-}
-
-/* End of pcreposix.c */
diff --git a/external/privoxy/pcre/pcreposix.h b/external/privoxy/pcre/pcreposix.h
deleted file mode 100644
index 7660acb..0000000
--- a/external/privoxy/pcre/pcreposix.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*************************************************
-*       Perl-Compatible Regular Expressions      *
-*************************************************/
-
-/* Copyright (c) 1997-2000 University of Cambridge */
-
-#ifndef _PCREPOSIX_H
-#define _PCREPOSIX_H
-
-/* This is the header for the POSIX wrapper interface to the PCRE Perl-
-Compatible Regular Expression library. It defines the things POSIX says should
-be there. I hope. */
-
-/* Have to include stdlib.h in order to ensure that size_t is defined. */
-
-#include <stdlib.h>
-
-/* Allow for C++ users */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Options defined by POSIX. */
-
-#define REG_ICASE     0x01
-#define REG_NEWLINE   0x02
-#define REG_NOTBOL    0x04
-#define REG_NOTEOL    0x08
-
-/* These are not used by PCRE, but by defining them we make it easier
-to slot PCRE into existing programs that make POSIX calls. */
-
-#define REG_EXTENDED  0
-#define REG_NOSUB     0
-
-/* Error values. Not all these are relevant or used by the wrapper. */
-
-enum {
-  REG_ASSERT = 1,  /* internal error ? */
-  REG_BADBR,       /* invalid repeat counts in {} */
-  REG_BADPAT,      /* pattern error */
-  REG_BADRPT,      /* ? * + invalid */
-  REG_EBRACE,      /* unbalanced {} */
-  REG_EBRACK,      /* unbalanced [] */
-  REG_ECOLLATE,    /* collation error - not relevant */
-  REG_ECTYPE,      /* bad class */
-  REG_EESCAPE,     /* bad escape sequence */
-  REG_EMPTY,       /* empty expression */
-  REG_EPAREN,      /* unbalanced () */
-  REG_ERANGE,      /* bad range inside [] */
-  REG_ESIZE,       /* expression too big */
-  REG_ESPACE,      /* failed to get memory */
-  REG_ESUBREG,     /* bad back reference */
-  REG_INVARG,      /* bad argument */
-  REG_NOMATCH      /* match failed */
-};
-
-
-/* The structure representing a compiled regular expression. */
-
-typedef struct {
-  void *re_pcre;
-  size_t re_nsub;
-  size_t re_erroffset;
-} regex_t;
-
-/* The structure in which a captured offset is returned. */
-
-typedef int regoff_t;
-
-typedef struct {
-  regoff_t rm_so;
-  regoff_t rm_eo;
-} regmatch_t;
-
-/* The functions */
-
-extern int regcomp(regex_t *, const char *, int);
-extern int regexec(regex_t *, const char *, size_t, regmatch_t *, int);
-extern size_t regerror(int, const regex_t *, char *, size_t);
-extern void regfree(regex_t *);
-
-#ifdef __cplusplus
-}   /* extern "C" */
-#endif
-
-#endif /* End of pcreposix.h */
diff --git a/external/privoxy/pcre/pcretest.c b/external/privoxy/pcre/pcretest.c
deleted file mode 100644
index ee5df5f..0000000
--- a/external/privoxy/pcre/pcretest.c
+++ /dev/null
@@ -1,1225 +0,0 @@
-/*************************************************
-*             PCRE testing program               *
-*************************************************/
-
-#include <ctype.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <time.h>
-#include <locale.h>
-
-/* Use the internal info for displaying the results of pcre_study(). */
-
-#include "internal.h"
-
-/* It is possible to compile this test program without including support for
-testing the POSIX interface, though this is not available via the standard
-Makefile. */
-
-#if !defined NOPOSIX
-#include "pcreposix.h"
-#endif
-
-#ifndef CLOCKS_PER_SEC
-#ifdef CLK_TCK
-#define CLOCKS_PER_SEC CLK_TCK
-#else
-#define CLOCKS_PER_SEC 100
-#endif
-#endif
-
-#define LOOPREPEAT 20000
-
-
-static FILE *outfile;
-static int log_store = 0;
-static size_t gotten_store;
-
-
-
-static int utf8_table1[] = {
-  0x0000007f, 0x000007ff, 0x0000ffff, 0x001fffff, 0x03ffffff, 0x7fffffff};
-
-static int utf8_table2[] = {
-  0, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc};
-
-static int utf8_table3[] = {
-  0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};
-
-
-/*************************************************
-*       Convert character value to UTF-8         *
-*************************************************/
-
-/* This function takes an integer value in the range 0 - 0x7fffffff
-and encodes it as a UTF-8 character in 0 to 6 bytes.
-
-Arguments:
-  cvalue     the character value
-  buffer     pointer to buffer for result - at least 6 bytes long
-
-Returns:     number of characters placed in the buffer
-             -1 if input character is negative
-             0 if input character is positive but too big (only when
-             int is longer than 32 bits)
-*/
-
-static int
-ord2utf8(int cvalue, unsigned char *buffer)
-{
-register int i, j;
-for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++)
-  if (cvalue <= utf8_table1[i]) break;
-if (i >= sizeof(utf8_table1)/sizeof(int)) return 0;
-if (cvalue < 0) return -1;
-*buffer++ = utf8_table2[i] | (cvalue & utf8_table3[i]);
-cvalue >>= 6 - i;
-for (j = 0; j < i; j++)
-  {
-  *buffer++ = 0x80 | (cvalue & 0x3f);
-  cvalue >>= 6;
-  }
-return i + 1;
-}
-
-
-/*************************************************
-*            Convert UTF-8 string to value       *
-*************************************************/
-
-/* This function takes one or more bytes that represents a UTF-8 character,
-and returns the value of the character.
-
-Argument:
-  buffer   a pointer to the byte vector
-  vptr     a pointer to an int to receive the value
-
-Returns:   >  0 => the number of bytes consumed
-           -6 to 0 => malformed UTF-8 character at offset = (-return)
-*/
-
-int
-utf82ord(unsigned char *buffer, int *vptr)
-{
-int c = *buffer++;
-int d = c;
-int i, j, s;
-
-for (i = -1; i < 6; i++)               /* i is number of additional bytes */
-  {
-  if ((d & 0x80) == 0) break;
-  d <<= 1;
-  }
-
-if (i == -1) { *vptr = c; return 1; }  /* ascii character */
-if (i == 0 || i == 6) return 0;        /* invalid UTF-8 */
-
-/* i now has a value in the range 1-5 */
-
-d = c & utf8_table3[i];
-s = 6 - i;
-
-for (j = 0; j < i; j++)
-  {
-  c = *buffer++;
-  if ((c & 0xc0) != 0x80) return -(j+1);
-  d |= (c & 0x3f) << s;
-  s += 6;
-  }
-
-/* Check that encoding was the correct unique one */
-
-for (j = 0; j < sizeof(utf8_table1)/sizeof(int); j++)
-  if (d <= utf8_table1[j]) break;
-if (j != i) return -(i+1);
-
-/* Valid value */
-
-*vptr = d;
-return i+1;
-}
-
-
-
-
-
-
-/* Debugging function to print the internal form of the regex. This is the same
-code as contained in pcre.c under the DEBUG macro. */
-
-static const char *OP_names[] = {
-  "End", "\\A", "\\B", "\\b", "\\D", "\\d",
-  "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z",
-  "Opt", "^", "$", "Any", "chars", "not",
-  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
-  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
-  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",
-  "*", "*?", "+", "+?", "?", "??", "{", "{",
-  "class", "Ref", "Recurse",
-  "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not",
-  "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref",
-  "Brazero", "Braminzero", "Bra"
-};
-
-
-static void print_internals(pcre *re)
-{
-unsigned char *code = ((real_pcre *)re)->code;
-
-fprintf(outfile, "------------------------------------------------------------------\n");
-
-for(;;)
-  {
-  int c;
-  int charlength;
-
-  fprintf(outfile, "%3d ", (int)(code - ((real_pcre *)re)->code));
-
-  if (*code >= OP_BRA)
-    {
-    fprintf(outfile, "%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA);
-    code += 2;
-    }
-
-  else switch(*code)
-    {
-    case OP_END:
-    fprintf(outfile, "    %s\n", OP_names[*code]);
-    fprintf(outfile, "------------------------------------------------------------------\n");
-    return;
-
-    case OP_OPT:
-    fprintf(outfile, " %.2x %s", code[1], OP_names[*code]);
-    code++;
-    break;
-
-    case OP_COND:
-    fprintf(outfile, "%3d Cond", (code[1] << 8) + code[2]);
-    code += 2;
-    break;
-
-    case OP_CREF:
-    fprintf(outfile, " %.2d %s", code[1], OP_names[*code]);
-    code++;
-    break;
-
-    case OP_CHARS:
-    charlength = *(++code);
-    fprintf(outfile, "%3d ", charlength);
-    while (charlength-- > 0)
-      if (isprint(c = *(++code))) fprintf(outfile, "%c", c);
-        else fprintf(outfile, "\\x%02x", c);
-    break;
-
-    case OP_KETRMAX:
-    case OP_KETRMIN:
-    case OP_ALT:
-    case OP_KET:
-    case OP_ASSERT:
-    case OP_ASSERT_NOT:
-    case OP_ASSERTBACK:
-    case OP_ASSERTBACK_NOT:
-    case OP_ONCE:
-    fprintf(outfile, "%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
-    code += 2;
-    break;
-
-    case OP_REVERSE:
-    fprintf(outfile, "%3d %s", (code[1] << 8) + code[2], OP_names[*code]);
-    code += 2;
-    break;
-
-    case OP_STAR:
-    case OP_MINSTAR:
-    case OP_PLUS:
-    case OP_MINPLUS:
-    case OP_QUERY:
-    case OP_MINQUERY:
-    case OP_TYPESTAR:
-    case OP_TYPEMINSTAR:
-    case OP_TYPEPLUS:
-    case OP_TYPEMINPLUS:
-    case OP_TYPEQUERY:
-    case OP_TYPEMINQUERY:
-    if (*code >= OP_TYPESTAR)
-      fprintf(outfile, "    %s", OP_names[code[1]]);
-    else if (isprint(c = code[1])) fprintf(outfile, "    %c", c);
-      else fprintf(outfile, "    \\x%02x", c);
-    fprintf(outfile, "%s", OP_names[*code++]);
-    break;
-
-    case OP_EXACT:
-    case OP_UPTO:
-    case OP_MINUPTO:
-    if (isprint(c = code[3])) fprintf(outfile, "    %c{", c);
-      else fprintf(outfile, "    \\x%02x{", c);
-    if (*code != OP_EXACT) fprintf(outfile, ",");
-    fprintf(outfile, "%d}", (code[1] << 8) + code[2]);
-    if (*code == OP_MINUPTO) fprintf(outfile, "?");
-    code += 3;
-    break;
-
-    case OP_TYPEEXACT:
-    case OP_TYPEUPTO:
-    case OP_TYPEMINUPTO:
-    fprintf(outfile, "    %s{", OP_names[code[3]]);
-    if (*code != OP_TYPEEXACT) fprintf(outfile, "0,");
-    fprintf(outfile, "%d}", (code[1] << 8) + code[2]);
-    if (*code == OP_TYPEMINUPTO) fprintf(outfile, "?");
-    code += 3;
-    break;
-
-    case OP_NOT:
-    if (isprint(c = *(++code))) fprintf(outfile, "    [^%c]", c);
-      else fprintf(outfile, "    [^\\x%02x]", c);
-    break;
-
-    case OP_NOTSTAR:
-    case OP_NOTMINSTAR:
-    case OP_NOTPLUS:
-    case OP_NOTMINPLUS:
-    case OP_NOTQUERY:
-    case OP_NOTMINQUERY:
-    if (isprint(c = code[1])) fprintf(outfile, "    [^%c]", c);
-      else fprintf(outfile, "    [^\\x%02x]", c);
-    fprintf(outfile, "%s", OP_names[*code++]);
-    break;
-
-    case OP_NOTEXACT:
-    case OP_NOTUPTO:
-    case OP_NOTMINUPTO:
-    if (isprint(c = code[3])) fprintf(outfile, "    [^%c]{", c);
-      else fprintf(outfile, "    [^\\x%02x]{", c);
-    if (*code != OP_NOTEXACT) fprintf(outfile, ",");
-    fprintf(outfile, "%d}", (code[1] << 8) + code[2]);
-    if (*code == OP_NOTMINUPTO) fprintf(outfile, "?");
-    code += 3;
-    break;
-
-    case OP_REF:
-    fprintf(outfile, "    \\%d", *(++code));
-    code++;
-    goto CLASS_REF_REPEAT;
-
-    case OP_CLASS:
-      {
-      int i, min, max;
-      code++;
-      fprintf(outfile, "    [");
-
-      for (i = 0; i < 256; i++)
-        {
-        if ((code[i/8] & (1 << (i&7))) != 0)
-          {
-          int j;
-          for (j = i+1; j < 256; j++)
-            if ((code[j/8] & (1 << (j&7))) == 0) break;
-          if (i == '-' || i == ']') fprintf(outfile, "\\");
-          if (isprint(i)) fprintf(outfile, "%c", i); else fprintf(outfile, "\\x%02x", i);
-          if (--j > i)
-            {
-            fprintf(outfile, "-");
-            if (j == '-' || j == ']') fprintf(outfile, "\\");
-            if (isprint(j)) fprintf(outfile, "%c", j); else fprintf(outfile, "\\x%02x", j);
-            }
-          i = j;
-          }
-        }
-      fprintf(outfile, "]");
-      code += 32;
-
-      CLASS_REF_REPEAT:
-
-      switch(*code)
-        {
-        case OP_CRSTAR:
-        case OP_CRMINSTAR:
-        case OP_CRPLUS:
-        case OP_CRMINPLUS:
-        case OP_CRQUERY:
-        case OP_CRMINQUERY:
-        fprintf(outfile, "%s", OP_names[*code]);
-        break;
-
-        case OP_CRRANGE:
-        case OP_CRMINRANGE:
-        min = (code[1] << 8) + code[2];
-        max = (code[3] << 8) + code[4];
-        if (max == 0) fprintf(outfile, "{%d,}", min);
-        else fprintf(outfile, "{%d,%d}", min, max);
-        if (*code == OP_CRMINRANGE) fprintf(outfile, "?");
-        code += 4;
-        break;
-
-        default:
-        code--;
-        }
-      }
-    break;
-
-    /* Anything else is just a one-node item */
-
-    default:
-    fprintf(outfile, "    %s", OP_names[*code]);
-    break;
-    }
-
-  code++;
-  fprintf(outfile, "\n");
-  }
-}
-
-
-
-/* Character string printing function. A "normal" and a UTF-8 version. */
-
-static void pchars(unsigned char *p, int length, int utf8)
-{
-int c;
-while (length-- > 0)
-  {
-  if (utf8)
-    {
-    int rc = utf82ord(p, &c);
-    if (rc > 0)
-      {
-      length -= rc - 1;
-      p += rc;
-      if (c < 256 && isprint(c)) fprintf(outfile, "%c", c);
-        else fprintf(outfile, "\\x{%02x}", c);
-      continue;
-      }
-    }
-
-   /* Not UTF-8, or malformed UTF-8  */
-
-  if (isprint(c = *(p++))) fprintf(outfile, "%c", c);
-    else fprintf(outfile, "\\x%02x", c);
-  }
-}
-
-
-
-/* Alternative malloc function, to test functionality and show the size of the
-compiled re. */
-
-static void *new_malloc(size_t size)
-{
-gotten_store = size;
-if (log_store)
-  fprintf(outfile, "Memory allocation (code space): %d\n",
-    (int)((int)size - offsetof(real_pcre, code[0])));
-return malloc(size);
-}
-
-
-
-
-/* Get one piece of information from the pcre_fullinfo() function */
-
-static void new_info(pcre *re, pcre_extra *study, int option, void *ptr)
-{
-int rc;
-if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0)
-  fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option);
-}
-
-
-
-
-/* Read lines from named file or stdin and write to named file or stdout; lines
-consist of a regular expression, in delimiters and optionally followed by
-options, followed by a set of test data, terminated by an empty line. */
-
-int main(int argc, char **argv)
-{
-FILE *infile = stdin;
-int options = 0;
-int study_options = 0;
-int op = 1;
-int timeit = 0;
-int showinfo = 0;
-int showstore = 0;
-int posix = 0;
-int debug = 0;
-int done = 0;
-unsigned char buffer[30000];
-unsigned char dbuffer[1024];
-
-/* Static so that new_malloc can use it. */
-
-outfile = stdout;
-
-/* Scan options */
-
-while (argc > 1 && argv[op][0] == '-')
-  {
-  if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0)
-    showstore = 1;
-  else if (strcmp(argv[op], "-t") == 0) timeit = 1;
-  else if (strcmp(argv[op], "-i") == 0) showinfo = 1;
-  else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;
-  else if (strcmp(argv[op], "-p") == 0) posix = 1;
-  else
-    {
-    printf("*** Unknown option %s\n", argv[op]);
-    printf("Usage: pcretest [-d] [-i] [-p] [-s] [-t] [<input> [<output>]]\n");
-    printf("  -d   debug: show compiled code; implies -i\n"
-           "  -i   show information about compiled pattern\n"
-           "  -p   use POSIX interface\n"
-           "  -s   output store information\n"
-           "  -t   time compilation and execution\n");
-    return 1;
-    }
-  op++;
-  argc--;
-  }
-
-/* Sort out the input and output files */
-
-if (argc > 1)
-  {
-  infile = fopen(argv[op], "r");
-  if (infile == NULL)
-    {
-    printf("** Failed to open %s\n", argv[op]);
-    return 1;
-    }
-  }
-
-if (argc > 2)
-  {
-  outfile = fopen(argv[op+1], "w");
-  if (outfile == NULL)
-    {
-    printf("** Failed to open %s\n", argv[op+1]);
-    return 1;
-    }
-  }
-
-/* Set alternative malloc function */
-
-pcre_malloc = new_malloc;
-
-/* Heading line, then prompt for first regex if stdin */
-
-fprintf(outfile, "PCRE version %s\n\n", pcre_version());
-
-/* Main loop */
-
-while (!done)
-  {
-  pcre *re = NULL;
-  pcre_extra *extra = NULL;
-
-#if !defined NOPOSIX  /* There are still compilers that require no indent */
-  regex_t preg;
-  int do_posix = 0;
-#endif
-
-  const char *error;
-  unsigned char *p, *pp, *ppp;
-  unsigned const char *tables = NULL;
-  int do_study = 0;
-  int do_debug = debug;
-  int do_G = 0;
-  int do_g = 0;
-  int do_showinfo = showinfo;
-  int do_showrest = 0;
-  int utf8 = 0;
-  int erroroffset, len, delimiter;
-
-  if (infile == stdin) printf("  re> ");
-  if (fgets((char *)buffer, sizeof(buffer), infile) == NULL) break;
-  if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
-
-  p = buffer;
-  while (isspace(*p)) p++;
-  if (*p == 0) continue;
-
-  /* Get the delimiter and seek the end of the pattern; if is isn't
-  complete, read more. */
-
-  delimiter = *p++;
-
-  if (isalnum(delimiter) || delimiter == '\\')
-    {
-    fprintf(outfile, "** Delimiter must not be alphameric or \\\n");
-    goto SKIP_DATA;
-    }
-
-  pp = p;
-
-  for(;;)
-    {
-    while (*pp != 0)
-      {
-      if (*pp == '\\' && pp[1] != 0) pp++;
-        else if (*pp == delimiter) break;
-      pp++;
-      }
-    if (*pp != 0) break;
-
-    len = sizeof(buffer) - (pp - buffer);
-    if (len < 256)
-      {
-      fprintf(outfile, "** Expression too long - missing delimiter?\n");
-      goto SKIP_DATA;
-      }
-
-    if (infile == stdin) printf("    > ");
-    if (fgets((char *)pp, len, infile) == NULL)
-      {
-      fprintf(outfile, "** Unexpected EOF\n");
-      done = 1;
-      goto CONTINUE;
-      }
-    if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
-    }
-
-  /* If the first character after the delimiter is backslash, make
-  the pattern end with backslash. This is purely to provide a way
-  of testing for the error message when a pattern ends with backslash. */
-
-  if (pp[1] == '\\') *pp++ = '\\';
-
-  /* Terminate the pattern at the delimiter */
-
-  *pp++ = 0;
-
-  /* Look for options after final delimiter */
-
-  options = 0;
-  study_options = 0;
-  log_store = showstore;  /* default from command line */
-
-  while (*pp != 0)
-    {
-    switch (*pp++)
-      {
-      case 'g': do_g = 1; break;
-      case 'i': options |= PCRE_CASELESS; break;
-      case 'm': options |= PCRE_MULTILINE; break;
-      case 's': options |= PCRE_DOTALL; break;
-      case 'x': options |= PCRE_EXTENDED; break;
-
-      case '+': do_showrest = 1; break;
-      case 'A': options |= PCRE_ANCHORED; break;
-      case 'D': do_debug = do_showinfo = 1; break;
-      case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
-      case 'G': do_G = 1; break;
-      case 'I': do_showinfo = 1; break;
-      case 'M': log_store = 1; break;
-
-#if !defined NOPOSIX
-      case 'P': do_posix = 1; break;
-#endif
-
-      case 'S': do_study = 1; break;
-      case 'U': options |= PCRE_UNGREEDY; break;
-      case 'X': options |= PCRE_EXTRA; break;
-      case '8': options |= PCRE_UTF8; utf8 = 1; break;
-
-      case 'L':
-      ppp = pp;
-      while (*ppp != '\n' && *ppp != ' ') ppp++;
-      *ppp = 0;
-      if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
-        {
-        fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
-        goto SKIP_DATA;
-        }
-      tables = pcre_maketables();
-      pp = ppp;
-      break;
-
-      case '\n': case ' ': break;
-      default:
-      fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);
-      goto SKIP_DATA;
-      }
-    }
-
-  /* Handle compiling via the POSIX interface, which doesn't support the
-  timing, showing, or debugging options, nor the ability to pass over
-  local character tables. */
-
-#if !defined NOPOSIX
-  if (posix || do_posix)
-    {
-    int rc;
-    int cflags = 0;
-    if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
-    if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
-    rc = regcomp(&preg, (char *)p, cflags);
-
-    /* Compilation failed; go back for another re, skipping to blank line
-    if non-interactive. */
-
-    if (rc != 0)
-      {
-      (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer));
-      fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
-      goto SKIP_DATA;
-      }
-    }
-
-  /* Handle compiling via the native interface */
-
-  else
-#endif  /* !defined NOPOSIX */
-
-    {
-    if (timeit)
-      {
-      register int i;
-      clock_t time_taken;
-      clock_t start_time = clock();
-      for (i = 0; i < LOOPREPEAT; i++)
-        {
-        re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
-        if (re != NULL) free(re);
-        }
-      time_taken = clock() - start_time;
-      fprintf(outfile, "Compile time %.3f milliseconds\n",
-        ((double)time_taken * 1000.0) /
-        ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC));
-      }
-
-    re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
-
-    /* Compilation failed; go back for another re, skipping to blank line
-    if non-interactive. */
-
-    if (re == NULL)
-      {
-      fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);
-      SKIP_DATA:
-      if (infile != stdin)
-        {
-        for (;;)
-          {
-          if (fgets((char *)buffer, sizeof(buffer), infile) == NULL)
-            {
-            done = 1;
-            goto CONTINUE;
-            }
-          len = (int)strlen((char *)buffer);
-          while (len > 0 && isspace(buffer[len-1])) len--;
-          if (len == 0) break;
-          }
-        fprintf(outfile, "\n");
-        }
-      goto CONTINUE;
-      }
-
-    /* Compilation succeeded; print data if required. There are now two
-    info-returning functions. The old one has a limited interface and
-    returns only limited data. Check that it agrees with the newer one. */
-
-    if (do_showinfo)
-      {
-      int old_first_char, old_options, old_count;
-      int count, backrefmax, first_char, need_char;
-      size_t size;
-
-      if (do_debug) print_internals(re);
-
-      new_info(re, NULL, PCRE_INFO_OPTIONS, &options);
-      new_info(re, NULL, PCRE_INFO_SIZE, &size);
-      new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
-      new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);
-      new_info(re, NULL, PCRE_INFO_FIRSTCHAR, &first_char);
-      new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char);
-
-      old_count = pcre_info(re, &old_options, &old_first_char);
-      if (count < 0) fprintf(outfile,
-        "Error %d from pcre_info()\n", count);
-      else
-        {
-        if (old_count != count) fprintf(outfile,
-          "Count disagreement: pcre_fullinfo=%d pcre_info=%d\n", count,
-            old_count);
-
-        if (old_first_char != first_char) fprintf(outfile,
-          "First char disagreement: pcre_fullinfo=%d pcre_info=%d\n",
-            first_char, old_first_char);
-
-        if (old_options != options) fprintf(outfile,
-          "Options disagreement: pcre_fullinfo=%d pcre_info=%d\n", options,
-            old_options);
-        }
-
-      if (size != gotten_store) fprintf(outfile,
-        "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",
-        size, gotten_store);
-
-      fprintf(outfile, "Capturing subpattern count = %d\n", count);
-      if (backrefmax > 0)
-        fprintf(outfile, "Max back reference = %d\n", backrefmax);
-      if (options == 0) fprintf(outfile, "No options\n");
-        else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s\n",
-          ((options & PCRE_ANCHORED) != 0)? " anchored" : "",
-          ((options & PCRE_CASELESS) != 0)? " caseless" : "",
-          ((options & PCRE_EXTENDED) != 0)? " extended" : "",
-          ((options & PCRE_MULTILINE) != 0)? " multiline" : "",
-          ((options & PCRE_DOTALL) != 0)? " dotall" : "",
-          ((options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
-          ((options & PCRE_EXTRA) != 0)? " extra" : "",
-          ((options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",
-          ((options & PCRE_UTF8) != 0)? " utf8" : "");
-
-      if (((((real_pcre *)re)->options) & PCRE_ICHANGED) != 0)
-        fprintf(outfile, "Case state changes\n");
-
-      if (first_char == -1)
-        {
-        fprintf(outfile, "First char at start or follows \\n\n");
-        }
-      else if (first_char < 0)
-        {
-        fprintf(outfile, "No first char\n");
-        }
-      else
-        {
-        if (isprint(first_char))
-          fprintf(outfile, "First char = \'%c\'\n", first_char);
-        else
-          fprintf(outfile, "First char = %d\n", first_char);
-        }
-
-      if (need_char < 0)
-        {
-        fprintf(outfile, "No need char\n");
-        }
-      else
-        {
-        if (isprint(need_char))
-          fprintf(outfile, "Need char = \'%c\'\n", need_char);
-        else
-          fprintf(outfile, "Need char = %d\n", need_char);
-        }
-      }
-
-    /* If /S was present, study the regexp to generate additional info to
-    help with the matching. */
-
-    if (do_study)
-      {
-      if (timeit)
-        {
-        register int i;
-        clock_t time_taken;
-        clock_t start_time = clock();
-        for (i = 0; i < LOOPREPEAT; i++)
-          extra = pcre_study(re, study_options, &error);
-        time_taken = clock() - start_time;
-        if (extra != NULL) free(extra);
-        fprintf(outfile, "  Study time %.3f milliseconds\n",
-          ((double)time_taken * 1000.0)/
-          ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC));
-        }
-
-      extra = pcre_study(re, study_options, &error);
-      if (error != NULL)
-        fprintf(outfile, "Failed to study: %s\n", error);
-      else if (extra == NULL)
-        fprintf(outfile, "Study returned NULL\n");
-
-      else if (do_showinfo)
-        {
-        uschar *start_bits = NULL;
-        new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);
-        if (start_bits == NULL)
-          fprintf(outfile, "No starting character set\n");
-        else
-          {
-          int i;
-          int c = 24;
-          fprintf(outfile, "Starting character set: ");
-          for (i = 0; i < 256; i++)
-            {
-            if ((start_bits[i/8] & (1<<(i%8))) != 0)
-              {
-              if (c > 75)
-                {
-                fprintf(outfile, "\n  ");
-                c = 2;
-                }
-              if (isprint(i) && i != ' ')
-                {
-                fprintf(outfile, "%c ", i);
-                c += 2;
-                }
-              else
-                {
-                fprintf(outfile, "\\x%02x ", i);
-                c += 5;
-                }
-              }
-            }
-          fprintf(outfile, "\n");
-          }
-        }
-      }
-    }
-
-  /* Read data lines and test them */
-
-  for (;;)
-    {
-    unsigned char *q;
-    unsigned char *bptr = dbuffer;
-    int count, c;
-    int copystrings = 0;
-    int getstrings = 0;
-    int getlist = 0;
-    int gmatched = 0;
-    int start_offset = 0;
-    int g_notempty = 0;
-    int offsets[45];
-    int size_offsets = sizeof(offsets)/sizeof(int);
-
-    options = 0;
-
-    if (infile == stdin) printf("data> ");
-    if (fgets((char *)buffer, sizeof(buffer), infile) == NULL)
-      {
-      done = 1;
-      goto CONTINUE;
-      }
-    if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
-
-    len = (int)strlen((char *)buffer);
-    while (len > 0 && isspace(buffer[len-1])) len--;
-    buffer[len] = 0;
-    if (len == 0) break;
-
-    p = buffer;
-    while (isspace(*p)) p++;
-
-    q = dbuffer;
-    while ((c = *p++) != 0)
-      {
-      int i = 0;
-      int n = 0;
-      if (c == '\\') switch ((c = *p++))
-        {
-        case 'a': c =    7; break;
-        case 'b': c = '\b'; break;
-        case 'e': c =   27; break;
-        case 'f': c = '\f'; break;
-        case 'n': c = '\n'; break;
-        case 'r': c = '\r'; break;
-        case 't': c = '\t'; break;
-        case 'v': c = '\v'; break;
-
-        case '0': case '1': case '2': case '3':
-        case '4': case '5': case '6': case '7':
-        c -= '0';
-        while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')
-          c = c * 8 + *p++ - '0';
-        break;
-
-        case 'x':
-
-        /* Handle \x{..} specially - new Perl thing for utf8 */
-
-        if (*p == '{')
-          {
-          unsigned char *pt = p;
-          c = 0;
-          while (isxdigit(*(++pt)))
-            c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'W');
-          if (*pt == '}')
-            {
-            unsigned char buffer[8];
-            int ii, utn;
-            utn = ord2utf8(c, buffer);
-            for (ii = 0; ii < utn - 1; ii++) *q++ = buffer[ii];
-            c = buffer[ii];   /* Last byte */
-            p = pt + 1;
-            break;
-            }
-          /* Not correct form; fall through */
-          }
-
-        /* Ordinary \x */
-
-        c = 0;
-        while (i++ < 2 && isxdigit(*p))
-          {
-          c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'W');
-          p++;
-          }
-        break;
-
-        case 0:   /* Allows for an empty line */
-        p--;
-        continue;
-
-        case 'A':  /* Option setting */
-        options |= PCRE_ANCHORED;
-        continue;
-
-        case 'B':
-        options |= PCRE_NOTBOL;
-        continue;
-
-        case 'C':
-        while(isdigit(*p)) n = n * 10 + *p++ - '0';
-        copystrings |= 1 << n;
-        continue;
-
-        case 'G':
-        while(isdigit(*p)) n = n * 10 + *p++ - '0';
-        getstrings |= 1 << n;
-        continue;
-
-        case 'L':
-        getlist = 1;
-        continue;
-
-        case 'N':
-        options |= PCRE_NOTEMPTY;
-        continue;
-
-        case 'O':
-        while(isdigit(*p)) n = n * 10 + *p++ - '0';
-        if (n <= (int)(sizeof(offsets)/sizeof(int))) size_offsets = n;
-        continue;
-
-        case 'Z':
-        options |= PCRE_NOTEOL;
-        continue;
-        }
-      *q++ = c;
-      }
-    *q = 0;
-    len = q - dbuffer;
-
-    /* Handle matching via the POSIX interface, which does not
-    support timing. */
-
-#if !defined NOPOSIX
-    if (posix || do_posix)
-      {
-      int rc;
-      int eflags = 0;
-      regmatch_t pmatch[sizeof(offsets)/sizeof(int)];
-      if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;
-      if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;
-
-      rc = regexec(&preg, (const char *)bptr, size_offsets, pmatch, eflags);
-
-      if (rc != 0)
-        {
-        (void)regerror(rc, &preg, (char *)buffer, sizeof(buffer));
-        fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);
-        }
-      else
-        {
-        size_t i;
-        for (i = 0; i < size_offsets; i++)
-          {
-          if (pmatch[i].rm_so >= 0)
-            {
-            fprintf(outfile, "%2d: ", (int)i);
-            pchars(dbuffer + pmatch[i].rm_so,
-              pmatch[i].rm_eo - pmatch[i].rm_so, utf8);
-            fprintf(outfile, "\n");
-            if (i == 0 && do_showrest)
-              {
-              fprintf(outfile, " 0+ ");
-              pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo, utf8);
-              fprintf(outfile, "\n");
-              }
-            }
-          }
-        }
-      }
-
-    /* Handle matching via the native interface - repeats for /g and /G */
-
-    else
-#endif  /* !defined NOPOSIX */
-
-    for (;; gmatched++)    /* Loop for /g or /G */
-      {
-      if (timeit)
-        {
-        register int i;
-        clock_t time_taken;
-        clock_t start_time = clock();
-        for (i = 0; i < LOOPREPEAT; i++)
-          count = pcre_exec(re, extra, (char *)bptr, len,
-            start_offset, options | g_notempty, offsets, size_offsets);
-        time_taken = clock() - start_time;
-        fprintf(outfile, "Execute time %.3f milliseconds\n",
-          ((double)time_taken * 1000.0)/
-          ((double)LOOPREPEAT * (double)CLOCKS_PER_SEC));
-        }
-
-      count = pcre_exec(re, extra, (char *)bptr, len,
-        start_offset, options | g_notempty, offsets, size_offsets);
-
-      if (count == 0)
-        {
-        fprintf(outfile, "Matched, but too many substrings\n");
-        count = size_offsets/3;
-        }
-
-      /* Matched */
-
-      if (count >= 0)
-        {
-        int i;
-        for (i = 0; i < count * 2; i += 2)
-          {
-          if (offsets[i] < 0)
-            fprintf(outfile, "%2d: <unset>\n", i/2);
-          else
-            {
-            fprintf(outfile, "%2d: ", i/2);
-            pchars(bptr + offsets[i], offsets[i+1] - offsets[i], utf8);
-            fprintf(outfile, "\n");
-            if (i == 0)
-              {
-              if (do_showrest)
-                {
-                fprintf(outfile, " 0+ ");
-                pchars(bptr + offsets[i+1], len - offsets[i+1], utf8);
-                fprintf(outfile, "\n");
-                }
-              }
-            }
-          }
-
-        for (i = 0; i < 32; i++)
-          {
-          if ((copystrings & (1 << i)) != 0)
-            {
-            char copybuffer[16];
-            int rc = pcre_copy_substring((char *)bptr, offsets, count,
-              i, copybuffer, sizeof(copybuffer));
-            if (rc < 0)
-              fprintf(outfile, "copy substring %d failed %d\n", i, rc);
-            else
-              fprintf(outfile, "%2dC %s (%d)\n", i, copybuffer, rc);
-            }
-          }
-
-        for (i = 0; i < 32; i++)
-          {
-          if ((getstrings & (1 << i)) != 0)
-            {
-            const char *substring;
-            int rc = pcre_get_substring((char *)bptr, offsets, count,
-              i, &substring);
-            if (rc < 0)
-              fprintf(outfile, "get substring %d failed %d\n", i, rc);
-            else
-              {
-              fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc);
-              /* free((void *)substring); */
-              pcre_free_substring(substring);
-              }
-            }
-          }
-
-        if (getlist)
-          {
-          const char **stringlist;
-          int rc = pcre_get_substring_list((char *)bptr, offsets, count,
-            &stringlist);
-          if (rc < 0)
-            fprintf(outfile, "get substring list failed %d\n", rc);
-          else
-            {
-            for (i = 0; i < count; i++)
-              fprintf(outfile, "%2dL %s\n", i, stringlist[i]);
-            if (stringlist[i] != NULL)
-              fprintf(outfile, "string list not terminated by NULL\n");
-            /* free((void *)stringlist); */
-            pcre_free_substring_list(stringlist);
-            }
-          }
-        }
-
-      /* Failed to match. If this is a /g or /G loop and we previously set
-      g_notempty after a null match, this is not necessarily the end.
-      We want to advance the start offset, and continue. Fudge the offset
-      values to achieve this. We won't be at the end of the string - that
-      was checked before setting g_notempty. */
-
-      else
-        {
-        if (g_notempty != 0)
-          {
-          offsets[0] = start_offset;
-          offsets[1] = start_offset + 1;
-          }
-        else
-          {
-          if (gmatched == 0)   /* Error if no previous matches */
-            {
-            if (count == -1) fprintf(outfile, "No match\n");
-              else fprintf(outfile, "Error %d\n", count);
-            }
-          break;  /* Out of the /g loop */
-          }
-        }
-
-      /* If not /g or /G we are done */
-
-      if (!do_g && !do_G) break;
-
-      /* If we have matched an empty string, first check to see if we are at
-      the end of the subject. If so, the /g loop is over. Otherwise, mimic
-      what Perl's /g options does. This turns out to be rather cunning. First
-      we set PCRE_NOTEMPTY and PCRE_ANCHORED and try the match again at the
-      same point. If this fails (picked up above) we advance to the next
-      character. */
-
-      g_notempty = 0;
-      if (offsets[0] == offsets[1])
-        {
-        if (offsets[0] == len) break;
-        g_notempty = PCRE_NOTEMPTY | PCRE_ANCHORED;
-        }
-
-      /* For /g, update the start offset, leaving the rest alone */
-
-      if (do_g) start_offset = offsets[1];
-
-      /* For /G, update the pointer and length */
-
-      else
-        {
-        bptr += offsets[1];
-        len -= offsets[1];
-        }
-      }  /* End of loop for /g and /G */
-    }    /* End of loop for data lines */
-
-  CONTINUE:
-
-#if !defined NOPOSIX
-  if (posix || do_posix) regfree(&preg);
-#endif
-
-  if (re != NULL) free(re);
-  if (extra != NULL) free(extra);
-  if (tables != NULL)
-    {
-    free((void *)tables);
-    setlocale(LC_CTYPE, "C");
-    }
-  }
-
-fprintf(outfile, "\n");
-return 0;
-}
-
-/* End */
diff --git a/external/privoxy/pcre/study.c b/external/privoxy/pcre/study.c
deleted file mode 100644
index 676db94..0000000
--- a/external/privoxy/pcre/study.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*************************************************
-*      Perl-Compatible Regular Expressions       *
-*************************************************/
-
-/*
-This is a library of functions to support regular expressions whose syntax
-and semantics are as close as possible to those of the Perl 5 language. See
-the file Tech.Notes for some information on the internals.
-
-Written by: Philip Hazel <ph10@xxxxxxxxx>
-
-           Copyright (c) 1997-2000 University of Cambridge
-
------------------------------------------------------------------------------
-Permission is granted to anyone to use this software for any purpose on any
-computer system, and to redistribute it freely, subject to the following
-restrictions:
-
-1. This software is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-2. The origin of this software must not be misrepresented, either by
-   explicit claim or by omission.
-
-3. Altered versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-
-4. If PCRE is embedded in any software that is released under the GNU
-   General Purpose Licence (GPL), then the terms of that licence shall
-   supersede any condition above with which it is incompatible.
------------------------------------------------------------------------------
-*/
-
-
-/* Include the internals header, which itself includes Standard C headers plus
-the external pcre header. */
-
-#include "internal.h"
-
-
-
-/*************************************************
-*      Set a bit and maybe its alternate case    *
-*************************************************/
-
-/* Given a character, set its bit in the table, and also the bit for the other
-version of a letter if we are caseless.
-
-Arguments:
-  start_bits    points to the bit map
-  c             is the character
-  caseless      the caseless flag
-  cd            the block with char table pointers
-
-Returns:        nothing
-*/
-
-static void
-set_bit(uschar *start_bits, int c, BOOL caseless, compile_data *cd)
-{
-start_bits[c/8] |= (1 << (c&7));
-if (caseless && (cd->ctypes[c] & ctype_letter) != 0)
-  start_bits[cd->fcc[c]/8] |= (1 << (cd->fcc[c]&7));
-}
-
-
-
-/*************************************************
-*          Create bitmap of starting chars       *
-*************************************************/
-
-/* This function scans a compiled unanchored expression and attempts to build a
-bitmap of the set of initial characters. If it can't, it returns FALSE. As time
-goes by, we may be able to get more clever at doing this.
-
-Arguments:
-  code         points to an expression
-  start_bits   points to a 32-byte table, initialized to 0
-  caseless     the current state of the caseless flag
-  cd           the block with char table pointers
-
-Returns:       TRUE if table built, FALSE otherwise
-*/
-
-static BOOL
-set_start_bits(const uschar *code, uschar *start_bits, BOOL caseless,
-  compile_data *cd)
-{
-register int c;
-
-/* This next statement and the later reference to dummy are here in order to
-trick the optimizer of the IBM C compiler for OS/2 into generating correct
-code. Apparently IBM isn't going to fix the problem, and we would rather not
-disable optimization (in this module it actually makes a big difference, and
-the pcre module can use all the optimization it can get). */
-
-volatile int dummy;
-
-do
-  {
-  const uschar *tcode = code + 3;
-  BOOL try_next = TRUE;
-
-  while (try_next)
-    {
-    try_next = FALSE;
-
-    /* If a branch starts with a bracket or a positive lookahead assertion,
-    recurse to set bits from within them. That's all for this branch. */
-
-    if ((int)*tcode >= OP_BRA || *tcode == OP_ASSERT)
-      {
-      if (!set_start_bits(tcode, start_bits, caseless, cd))
-        return FALSE;
-      }
-
-    else switch(*tcode)
-      {
-      default:
-      return FALSE;
-
-      /* Skip over lookbehind and negative lookahead assertions */
-
-      case OP_ASSERT_NOT:
-      case OP_ASSERTBACK:
-      case OP_ASSERTBACK_NOT:
-      try_next = TRUE;
-      do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT);
-      tcode += 3;
-      break;
-
-      /* Skip over an option setting, changing the caseless flag */
-
-      case OP_OPT:
-      caseless = (tcode[1] & PCRE_CASELESS) != 0;
-      tcode += 2;
-      try_next = TRUE;
-      break;
-
-      /* BRAZERO does the bracket, but carries on. */
-
-      case OP_BRAZERO:
-      case OP_BRAMINZERO:
-      if (!set_start_bits(++tcode, start_bits, caseless, cd))
-        return FALSE;
-      dummy = 1;
-      do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT);
-      tcode += 3;
-      try_next = TRUE;
-      break;
-
-      /* Single-char * or ? sets the bit and tries the next item */
-
-      case OP_STAR:
-      case OP_MINSTAR:
-      case OP_QUERY:
-      case OP_MINQUERY:
-      set_bit(start_bits, tcode[1], caseless, cd);
-      tcode += 2;
-      try_next = TRUE;
-      break;
-
-      /* Single-char upto sets the bit and tries the next */
-
-      case OP_UPTO:
-      case OP_MINUPTO:
-      set_bit(start_bits, tcode[3], caseless, cd);
-      tcode += 4;
-      try_next = TRUE;
-      break;
-
-      /* At least one single char sets the bit and stops */
-
-      case OP_EXACT:       /* Fall through */
-      tcode++;
-
-      case OP_CHARS:       /* Fall through */
-      tcode++;
-
-      case OP_PLUS:
-      case OP_MINPLUS:
-      set_bit(start_bits, tcode[1], caseless, cd);
-      break;
-
-      /* Single character type sets the bits and stops */
-
-      case OP_NOT_DIGIT:
-      for (c = 0; c < 32; c++)
-        start_bits[c] |= ~cd->cbits[c+cbit_digit];
-      break;
-
-      case OP_DIGIT:
-      for (c = 0; c < 32; c++)
-        start_bits[c] |= cd->cbits[c+cbit_digit];
-      break;
-
-      case OP_NOT_WHITESPACE:
-      for (c = 0; c < 32; c++)
-        start_bits[c] |= ~cd->cbits[c+cbit_space];
-      break;
-
-      case OP_WHITESPACE:
-      for (c = 0; c < 32; c++)
-        start_bits[c] |= cd->cbits[c+cbit_space];
-      break;
-
-      case OP_NOT_WORDCHAR:
-      for (c = 0; c < 32; c++)
-        start_bits[c] |= ~cd->cbits[c+cbit_word];
-      break;
-
-      case OP_WORDCHAR:
-      for (c = 0; c < 32; c++)
-        start_bits[c] |= cd->cbits[c+cbit_word];
-      break;
-
-      /* One or more character type fudges the pointer and restarts, knowing
-      it will hit a single character type and stop there. */
-
-      case OP_TYPEPLUS:
-      case OP_TYPEMINPLUS:
-      tcode++;
-      try_next = TRUE;
-      break;
-
-      case OP_TYPEEXACT:
-      tcode += 3;
-      try_next = TRUE;
-      break;
-
-      /* Zero or more repeats of character types set the bits and then
-      try again. */
-
-      case OP_TYPEUPTO:
-      case OP_TYPEMINUPTO:
-      tcode += 2;               /* Fall through */
-
-      case OP_TYPESTAR:
-      case OP_TYPEMINSTAR:
-      case OP_TYPEQUERY:
-      case OP_TYPEMINQUERY:
-      switch(tcode[1])
-        {
-        case OP_NOT_DIGIT:
-        for (c = 0; c < 32; c++)
-          start_bits[c] |= ~cd->cbits[c+cbit_digit];
-        break;
-
-        case OP_DIGIT:
-        for (c = 0; c < 32; c++)
-          start_bits[c] |= cd->cbits[c+cbit_digit];
-        break;
-
-        case OP_NOT_WHITESPACE:
-        for (c = 0; c < 32; c++)
-          start_bits[c] |= ~cd->cbits[c+cbit_space];
-        break;
-
-        case OP_WHITESPACE:
-        for (c = 0; c < 32; c++)
-          start_bits[c] |= cd->cbits[c+cbit_space];
-        break;
-
-        case OP_NOT_WORDCHAR:
-        for (c = 0; c < 32; c++)
-          start_bits[c] |= ~cd->cbits[c+cbit_word];
-        break;
-
-        case OP_WORDCHAR:
-        for (c = 0; c < 32; c++)
-          start_bits[c] |= cd->cbits[c+cbit_word];
-        break;
-        }
-
-      tcode += 2;
-      try_next = TRUE;
-      break;
-
-      /* Character class: set the bits and either carry on or not,
-      according to the repeat count. */
-
-      case OP_CLASS:
-        {
-        tcode++;
-        for (c = 0; c < 32; c++) start_bits[c] |= tcode[c];
-        tcode += 32;
-        switch (*tcode)
-          {
-          case OP_CRSTAR:
-          case OP_CRMINSTAR:
-          case OP_CRQUERY:
-          case OP_CRMINQUERY:
-          tcode++;
-          try_next = TRUE;
-          break;
-
-          case OP_CRRANGE:
-          case OP_CRMINRANGE:
-          if (((tcode[1] << 8) + tcode[2]) == 0)
-            {
-            tcode += 5;
-            try_next = TRUE;
-            }
-          break;
-          }
-        }
-      break; /* End of class handling */
-
-      }      /* End of switch */
-    }        /* End of try_next loop */
-
-  code += (code[1] << 8) + code[2];   /* Advance to next branch */
-  }
-while (*code == OP_ALT);
-return TRUE;
-}
-
-
-
-/*************************************************
-*          Study a compiled expression           *
-*************************************************/
-
-/* This function is handed a compiled expression that it must study to produce
-information that will speed up the matching. It returns a pcre_extra block
-which then gets handed back to pcre_exec().
-
-Arguments:
-  re        points to the compiled expression
-  options   contains option bits
-  errorptr  points to where to place error messages;
-            set NULL unless error
-
-Returns:    pointer to a pcre_extra block,
-            NULL on error or if no optimization possible
-*/
-
-pcre_extra *
-pcre_study(const pcre *external_re, int options, const char **errorptr)
-{
-uschar start_bits[32];
-real_pcre_extra *extra;
-const real_pcre *re = (const real_pcre *)external_re;
-compile_data compile_block;
-
-*errorptr = NULL;
-
-if (re == NULL || re->magic_number != MAGIC_NUMBER)
-  {
-  *errorptr = "argument is not a compiled regular expression";
-  return NULL;
-  }
-
-if ((options & ~PUBLIC_STUDY_OPTIONS) != 0)
-  {
-  *errorptr = "unknown or incorrect option bit(s) set";
-  return NULL;
-  }
-
-/* For an anchored pattern, or an unchored pattern that has a first char, or a
-multiline pattern that matches only at "line starts", no further processing at
-present. */
-
-if ((re->options & (PCRE_ANCHORED|PCRE_FIRSTSET|PCRE_STARTLINE)) != 0)
-  return NULL;
-
-/* Set the character tables in the block which is passed around */
-
-compile_block.lcc = re->tables + lcc_offset;
-compile_block.fcc = re->tables + fcc_offset;
-compile_block.cbits = re->tables + cbits_offset;
-compile_block.ctypes = re->tables + ctypes_offset;
-
-/* See if we can find a fixed set of initial characters for the pattern. */
-
-memset(start_bits, 0, 32 * sizeof(uschar));
-if (!set_start_bits(re->code, start_bits, (re->options & PCRE_CASELESS) != 0,
-  &compile_block)) return NULL;
-
-/* Get an "extra" block and put the information therein. */
-
-extra = (real_pcre_extra *)(pcre_malloc)(sizeof(real_pcre_extra));
-
-if (extra == NULL)
-  {
-  *errorptr = "failed to get memory";
-  return NULL;
-  }
-
-extra->options = PCRE_STUDY_MAPPED;
-memcpy(extra->start_bits, start_bits, sizeof(start_bits));
-
-return (pcre_extra *)extra;
-}
-
-/* End of study.c */
diff --git a/external/privoxy/pcre/vc_dftables.dsp b/external/privoxy/pcre/vc_dftables.dsp
deleted file mode 100755
index 60404f8..0000000
--- a/external/privoxy/pcre/vc_dftables.dsp
+++ /dev/null
@@ -1,296 +0,0 @@
-# Microsoft Developer Studio Project File - Name="vc_dftables" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 5.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=vc_dftables - Win32 Debug with Win32 threads
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "vc_dftables.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "vc_dftables.mak"\
- CFG="vc_dftables - Win32 Debug with Win32 threads"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "vc_dftables - Win32 Release" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE "vc_dftables - Win32 Debug" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE "vc_dftables - Win32 Debug with Win32 threads" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE "vc_dftables - Win32 Release with Win32 threads" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "vc_dftables - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "vc_dftables"
-# PROP Intermediate_Dir "vc_dftables"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# Begin Special Build Tool
-OutDir=.\vc_dftables
-SOURCE=$(InputPath)
-PostBuild_Desc=Running program to generate chartables.c
-PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c
-# End Special Build Tool
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "vc_dftables_dbg"
-# PROP Intermediate_Dir "vc_dftables_dbg"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# Begin Special Build Tool
-OutDir=.\vc_dftables_dbg
-SOURCE=$(InputPath)
-PostBuild_Desc=Running program to generate chartables.c
-PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c
-# End Special Build Tool
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "vc_dftab"
-# PROP BASE Intermediate_Dir "vc_dftab"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "vc_dftables_dbg"
-# PROP Intermediate_Dir "vc_dftables_dbg"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# Begin Special Build Tool
-OutDir=.\vc_dftables_dbg
-SOURCE=$(InputPath)
-PostBuild_Desc=Running program to generate chartables.c
-PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c
-# End Special Build Tool
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "vc_dfta0"
-# PROP BASE Intermediate_Dir "vc_dfta0"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "vc_dftables"
-# PROP Intermediate_Dir "vc_dftables"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# Begin Special Build Tool
-OutDir=.\vc_dftables
-SOURCE=$(InputPath)
-PostBuild_Desc=Running program to generate chartables.c
-PostBuild_Cmds=$(OutDir)\vc_dftables.exe >$(OutDir)\..\chartables.c
-# End Special Build Tool
-
-!ENDIF 
-
-# Begin Target
-
-# Name "vc_dftables - Win32 Release"
-# Name "vc_dftables - Win32 Debug"
-# Name "vc_dftables - Win32 Debug with Win32 threads"
-# Name "vc_dftables - Win32 Release with Win32 threads"
-# Begin Group "File Copy"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=..\vc_config_pthreads.h
-
-!IF  "$(CFG)" == "vc_dftables - Win32 Release"
-
-# PROP Ignore_Default_Tool 1
-# Begin Custom Build - Copying vc_config_pthreads.h
-WkspDir=.
-InputPath=..\vc_config_pthreads.h
-
-"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy "$(InputPath)" "$(WkspDir)\..\config.h"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug"
-
-# PROP Ignore_Default_Tool 1
-# Begin Custom Build - Copying vc_config_pthreads.h
-WkspDir=.
-InputPath=..\vc_config_pthreads.h
-
-"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy "$(InputPath)" "$(WkspDir)\..\config.h"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads"
-
-# PROP Exclude_From_Build 1
-# PROP Ignore_Default_Tool 1
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads"
-
-# PROP Exclude_From_Build 1
-# PROP Ignore_Default_Tool 1
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=..\vc_config_winthreads.h
-
-!IF  "$(CFG)" == "vc_dftables - Win32 Release"
-
-# PROP Exclude_From_Build 1
-# PROP Ignore_Default_Tool 1
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug"
-
-# PROP Exclude_From_Build 1
-# PROP Ignore_Default_Tool 1
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads"
-
-# PROP Ignore_Default_Tool 1
-# Begin Custom Build - Copying vc_config_winthreads.h
-WkspDir=.
-InputPath=..\vc_config_winthreads.h
-
-"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy "$(InputPath)" "$(WkspDir)\..\config.h"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads"
-
-# PROP Ignore_Default_Tool 1
-# Begin Custom Build - Copying vc_config_winthreads.h
-WkspDir=.
-InputPath=..\vc_config_winthreads.h
-
-"$(WkspDir)\..\config.h" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy "$(InputPath)" "$(WkspDir)\..\config.h"
-
-# End Custom Build
-
-!ENDIF 
-
-# End Source File
-# End Group
-# Begin Source File
-
-SOURCE=..\config.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\config.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\dftables.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\internal.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\maketables.c
-
-!IF  "$(CFG)" == "vc_dftables - Win32 Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Debug with Win32 threads"
-
-# PROP BASE Exclude_From_Build 1
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_dftables - Win32 Release with Win32 threads"
-
-# PROP BASE Exclude_From_Build 1
-# PROP Exclude_From_Build 1
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre.h
-# End Source File
-# End Target
-# End Project
diff --git a/external/privoxy/pcrs.c b/external/privoxy/pcrs.c
deleted file mode 100644
index 1946ca7..0000000
--- a/external/privoxy/pcrs.c
+++ /dev/null
@@ -1,1317 +0,0 @@
-const char pcrs_rcs[] = "$Id: pcrs.c,v 1.29 2007/09/22 16:17:19 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/pcrs.c,v $
- *
- * Purpose     :  pcrs is a supplement to the pcre library by Philip Hazel
- *                <ph10@xxxxxxxxx> and adds Perl-style substitution. That
- *                is, it mimics Perl's 's' operator. See pcrs(3) for details.
- *
- *                WARNING: This file contains additional functions and bug
- *                fixes that aren't part of the latest official pcrs package
- *                (which apparently is no longer maintained).
- *
- * Copyright   :  Written and Copyright (C) 2000, 2001 by Andreas S. Oesterhelt
- *                <andreas@xxxxxxxxxxxxxx>
- *
- *                Copyright (C) 2006, 2007 Fabian Keil <fk@xxxxxxxxxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU Lesser
- *                General Public License (LGPL), version 2.1, which  should
- *                be included in this distribution (see LICENSE.txt), with
- *                the exception that the permission to replace that license
- *                with the GNU General Public License (GPL) given in section
- *                3 is restricted to version 2 of the GPL.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the license for more details.
- *
- *                The GNU Lesser General Public License should be included
- *                with this file.  If not, you can view it at
- *                http://www.gnu.org/licenses/lgpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: pcrs.c,v $
- *    Revision 1.29  2007/09/22 16:17:19  fabiankeil
- *    Move our includes below system includes to prevent macro conflicts.
- *
- *    Revision 1.28  2007/08/18 14:37:27  fabiankeil
- *    Ditch hex_to_byte() in favour of xtoi().
- *
- *    Revision 1.27  2007/08/05 13:47:04  fabiankeil
- *    #1763173 from Stefan Huehner: s@const static@static const@.
- *
- *    Revision 1.26  2007/07/01 13:29:54  fabiankeil
- *    Add limited hex notation support for the PCRS
- *    substitution text ('\x7e' = '~'). Closes #1627140.
- *
- *    Revision 1.25  2007/04/30 15:02:18  fabiankeil
- *    Introduce dynamic pcrs jobs that can resolve variables.
- *
- *    Revision 1.24  2007/01/05 15:46:12  fabiankeil
- *    Don't use strlen() to calculate the length of
- *    the pcrs substitutes. They don't have to be valid C
- *    strings and getting their length wrong can result in
- *    user-controlled memory corruption.
- *
- *    Thanks to Felix Gröbert for reporting the problem
- *    and providing the fix [#1627140].
- *
- *    Revision 1.23  2006/12/29 17:53:05  fabiankeil
- *    Fixed gcc43 conversion warnings.
- *
- *    Revision 1.22  2006/12/24 17:34:20  fabiankeil
- *    Add pcrs_strerror() message for PCRE_ERROR_MATCHLIMIT
- *    and give a hint why an error code might be unknown.
- *
- *    Catch NULL subjects early in pcrs_execute().
- *
- *    Revision 1.21  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.19.2.4  2005/05/07 21:50:55  david__schmidt
- *    A few memory leaks plugged (mostly on error paths)
- *
- *    Revision 1.19.2.3  2003/12/04 12:32:45  oes
- *    Append a trailing nullbyte to result to facilitate string processing
- *
- *    Revision 1.19.2.2  2002/10/08 16:22:28  oes
- *    Bugfix: Need to check validity of backreferences explicitly,
- *    because when max_matches are reached and matches is expanded,
- *    realloc() does not zero the memory. Fixes Bug # 606227
- *
- *    Revision 1.19.2.1  2002/08/10 11:23:40  oes
- *    Include prce.h via project.h, where the appropriate
- *    source will have been selected
- *
- *    Revision 1.19  2002/03/08 14:47:48  oes
- *    Cosmetics
- *
- *    Revision 1.18  2002/03/08 14:17:14  oes
- *    Fixing -Wconversion warnings
- *
- *    Revision 1.17  2002/03/08 13:45:48  oes
- *    Hiding internal functions
- *
- *    Revision 1.16  2001/11/30 21:32:14  jongfoster
- *    Fixing signed/unsigned comparison (Andreas please check this!)
- *    One tab->space
- *
- *    Revision 1.15  2001/09/20 16:11:06  steudten
- *
- *    Add casting for some string functions.
- *
- *    Revision 1.14  2001/09/09 21:41:57  oes
- *    Fixing yet another silly bug
- *
- *    Revision 1.13  2001/09/06 14:05:59  oes
- *    Fixed silly bug
- *
- *    Revision 1.12  2001/08/18 11:35:00  oes
- *    - Introduced pcrs_strerror()
- *    - made some NULL arguments non-fatal
- *    - added support for \n \r \e \b \t \f \a \0 in substitute
- *    - made quoting adhere to standard rules
- *    - added warning for bad backrefs
- *    - added pcrs_execute_list()
- *    - fixed comments
- *    - bugfix & cosmetics
- *
- *    Revision 1.11  2001/08/15 15:32:03  oes
- *     - Added support for Perl's special variables $+, $' and $`
- *     - Improved the substitute parser
- *     - Replaced the hard limit for the maximum number of matches
- *       by dynamic reallocation
- *
- *    Revision 1.10  2001/08/05 13:13:11  jongfoster
- *    Making parameters "const" where possible.
- *
- *    Revision 1.9  2001/07/18 17:27:00  oes
- *    Changed interface; Cosmetics
- *
- *    Revision 1.8  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.7  2001/06/29 13:33:04  oes
- *    - Cleaned up, renamed and reordered functions,
- *      improved comments
- *    - Removed my_strsep
- *    - Replaced globalflag with a general flags int
- *      that holds PCRS_GLOBAL, PCRS_SUCCESS, and PCRS_TRIVIAL
- *    - Introduced trivial option that will prevent pcrs
- *      from honouring backreferences in the substitute,
- *      which is useful for large substitutes that are
- *      red in from somewhere and saves the pain of escaping
- *      the backrefs
- *    - Introduced convenience function pcrs_free_joblist()
- *    - Split pcrs_make_job() into pcrs_compile(), which still
- *      takes a complete s/// comand as argument and parses it,
- *      and a new function pcrs_make_job, which takes the
- *      three separate components. This should make for a
- *      much friendlier frontend.
- *    - Removed create_pcrs_job() which was useless
- *    - Fixed a bug in pcrs_execute
- *    - Success flag is now handled by pcrs instead of user
- *
- *    Revision 1.6  2001/06/03 19:12:45  oes
- *    added FIXME
- *
- *    Revision 1.5  2001/05/29 09:50:24  jongfoster
- *    (Fixed one int -> size_t)
- *
- *    Revision 1.4  2001/05/25 14:12:40  oes
- *    Fixed bug: Empty substitutes now detected
- *
- *    Revision 1.3  2001/05/25 11:03:55  oes
- *    Added sanity check for NULL jobs to pcrs_exec_substitution
- *
- *    Revision 1.2  2001/05/22 18:46:04  oes
- *
- *      Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:02  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include <string.h>
-#include <ctype.h>
-#include <assert.h>
-
-/*
- * Include project.h just so that the right pcre.h gets
- * included from there
- */
-#include "project.h"
-
-/* For snprintf only */
-#include "miscutil.h"
-/* For xtoi */
-#include "encode.h"
-
-#include "pcrs.h"
-
-const char pcrs_h_rcs[] = PCRS_H_VERSION;
-
-/*
- * Internal prototypes
- */
-
-static int              pcrs_parse_perl_options(const char *optstring, int *flags);
-static pcrs_substitute *pcrs_compile_replacement(const char *replacement, int trivialflag,
-                        int capturecount, int *errptr);
-static int              is_hex_sequence(const char *sequence);
-
-/*********************************************************************
- *
- * Function    :  pcrs_strerror
- *
- * Description :  Return a string describing a given error code.
- *             
- * Parameters  :
- *          1  :  error = the error code
- *
- * Returns     :  char * to the descriptive string
- *
- *********************************************************************/
-const char *pcrs_strerror(const int error)
-{
-   if (error < 0)
-   {
-      switch (error)
-      {
-         /* Passed-through PCRE error: */
-         case PCRE_ERROR_NOMEMORY:     return "(pcre:) No memory";
-
-         /* Shouldn't happen unless PCRE or PCRS bug, or user messed with compiled job: */
-         case PCRE_ERROR_NULL:         return "(pcre:) NULL code or subject or ovector";
-         case PCRE_ERROR_BADOPTION:    return "(pcre:) Unrecognized option bit";
-         case PCRE_ERROR_BADMAGIC:     return "(pcre:) Bad magic number in code";
-         case PCRE_ERROR_UNKNOWN_NODE: return "(pcre:) Bad node in pattern";
-
-         /* Can't happen / not passed: */
-         case PCRE_ERROR_NOSUBSTRING:  return "(pcre:) Fire in power supply"; 
-         case PCRE_ERROR_NOMATCH:      return "(pcre:) Water in power supply";
-
-#ifdef PCRE_ERROR_MATCHLIMIT
-         /*
-          * Only reported by PCRE versions newer than our own.
-          */
-         case PCRE_ERROR_MATCHLIMIT:   return "(pcre:) Match limit reached";
-#endif /* def PCRE_ERROR_MATCHLIMIT */
-
-         /* PCRS errors: */
-         case PCRS_ERR_NOMEM:          return "(pcrs:) No memory";
-         case PCRS_ERR_CMDSYNTAX:      return "(pcrs:) Syntax error while parsing command";
-         case PCRS_ERR_STUDY:          return "(pcrs:) PCRE error while studying the pattern";
-         case PCRS_ERR_BADJOB:         return "(pcrs:) Bad job - NULL job, pattern or substitute";
-         case PCRS_WARN_BADREF:        return "(pcrs:) Backreference out of range";
-         case PCRS_WARN_TRUNCATION:
-            return "(pcrs:) At least one variable was too big and has been truncated before compilation";
-
-         /* 
-          * XXX: With the exception of PCRE_ERROR_MATCHLIMIT we
-          * only catch PCRE errors that can happen with our internal
-          * version. If Privoxy is linked against a newer
-          * PCRE version all bets are off ...
-          */
-         default:  return "Unknown error. Privoxy out of sync with PCRE?";
-      }
-   }
-   /* error >= 0: No error */
-   return "(pcrs:) Everything's just fine. Thanks for asking.";
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_parse_perl_options
- *
- * Description :  This function parses a string containing the options to
- *                Perl's s/// operator. It returns an integer that is the
- *                pcre equivalent of the symbolic optstring.
- *                Since pcre doesn't know about Perl's 'g' (global) or pcrs',
- *                'T' (trivial) options but pcrs needs them, the corresponding
- *                flags are set if 'g'or 'T' is encountered.
- *                Note: The 'T' and 'U' options do not conform to Perl.
- *             
- * Parameters  :
- *          1  :  optstring = string with options in perl syntax
- *          2  :  flags = see description
- *
- * Returns     :  option integer suitable for pcre 
- *
- *********************************************************************/
-static int pcrs_parse_perl_options(const char *optstring, int *flags)
-{
-   size_t i;
-   int rc = 0;
-   *flags = 0;
-
-   if (NULL == optstring) return 0;
-
-   for (i = 0; i < strlen(optstring); i++)
-   {
-      switch(optstring[i])
-      {
-         case 'e': break; /* ToDo ;-) */
-         case 'g': *flags |= PCRS_GLOBAL; break;
-         case 'i': rc |= PCRE_CASELESS; break;
-         case 'm': rc |= PCRE_MULTILINE; break;
-         case 'o': break;
-         case 's': rc |= PCRE_DOTALL; break;
-         case 'x': rc |= PCRE_EXTENDED; break;
-         case 'U': rc |= PCRE_UNGREEDY; break;
-         case 'T': *flags |= PCRS_TRIVIAL; break;
-         default: break;
-      }
-   }
-   return rc;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_compile_replacement
- *
- * Description :  This function takes a Perl-style replacement (2nd argument
- *                to the s/// operator and returns a compiled pcrs_substitute,
- *                or NULL if memory allocation for the substitute structure
- *                fails.
- *
- * Parameters  :
- *          1  :  replacement = replacement part of s/// operator
- *                              in perl syntax
- *          2  :  trivialflag = Flag that causes backreferences to be
- *                              ignored.
- *          3  :  capturecount = Number of capturing subpatterns in
- *                               the pattern. Needed for $+ handling.
- *          4  :  errptr = pointer to an integer in which error
- *                         conditions can be returned.
- *
- * Returns     :  pcrs_substitute data structure, or NULL if an
- *                error is encountered. In that case, *errptr has
- *                the reason.
- *
- *********************************************************************/
-static pcrs_substitute *pcrs_compile_replacement(const char *replacement, int trivialflag, int capturecount, int *errptr)
-{
-   int i, k, l, quoted;
-   size_t length;
-   char *text;
-   pcrs_substitute *r;
-
-   i = k = l = quoted = 0;
-
-   /*
-    * Sanity check
-    */
-   if (NULL == replacement)
-   {
-      replacement = "";
-   }
-
-   /*
-    * Get memory or fail
-    */
-   if (NULL == (r = (pcrs_substitute *)malloc(sizeof(pcrs_substitute))))
-   {
-      *errptr = PCRS_ERR_NOMEM;
-      return NULL;
-   }
-   memset(r, '\0', sizeof(pcrs_substitute));
-
-   length = strlen(replacement);
-
-   if (NULL == (text = (char *)malloc(length + 1)))
-   {
-      free(r);
-      *errptr = PCRS_ERR_NOMEM;
-      return NULL;
-   }
-   memset(text, '\0', length + 1);
-   
-
-   /*
-    * In trivial mode, just copy the substitute text
-    */
-   if (trivialflag)
-   {
-      text = strncpy(text, replacement, length + 1);
-      k = (int)length;
-   }
-
-   /*
-    * Else, parse, cut out and record all backreferences
-    */
-   else
-   {
-      while (i < (int)length)
-      {
-         /* Quoting */
-         if (replacement[i] == '\\')
-         {
-            if (quoted)
-            {
-               text[k++] = replacement[i++];
-               quoted = 0;
-            }
-            else
-            {
-               if (replacement[i+1] && strchr("tnrfae0", replacement[i+1]))
-               {
-                  switch (replacement[++i])
-                  {
-                  case 't':
-                     text[k++] = '\t';
-                     break;
-                  case 'n':
-                     text[k++] = '\n';
-                     break;
-                  case 'r':
-                     text[k++] = '\r';
-                     break;
-                  case 'f':
-                     text[k++] = '\f';
-                     break;
-                  case 'a':
-                     text[k++] = 7;
-                     break;
-                  case 'e':
-                     text[k++] = 27;
-                     break;
-                  case '0':
-                     text[k++] = '\0';
-                     break;
-                  }
-                  i++;
-               }
-               else if (is_hex_sequence(&replacement[i]))
-               {
-                  /*
-                   * Replace a hex sequence with a single
-                   * character with the sequence's ascii value.
-                   * e.g.: '\x7e' => '~'
-                   */
-                  const int ascii_value = xtoi(&replacement[i+2]);
-
-                  assert(ascii_value > 0);
-                  assert(ascii_value < 256);
-                  text[k++] = (char)ascii_value;
-                  i += 4;
-               }               
-               else
-               {
-                  quoted = 1;
-                  i++;
-               }
-            }
-            continue;
-         }
-
-         /* Backreferences */
-         if (replacement[i] == '$' && !quoted && i < (int)(length - 1))
-         {
-            char *symbol, symbols[] = "'`+&";
-            r->block_length[l] = (size_t)(k - r->block_offset[l]);
-
-            /* Numerical backreferences */
-            if (isdigit((int)replacement[i + 1]))
-            {
-               while (i < (int)length && isdigit((int)replacement[++i]))
-               {
-                  r->backref[l] = r->backref[l] * 10 + replacement[i] - 48;
-               }
-               if (r->backref[l] > capturecount)
-               {
-                  *errptr = PCRS_WARN_BADREF;
-               }
-            }
-
-            /* Symbolic backreferences: */
-            else if (NULL != (symbol = strchr(symbols, replacement[i + 1])))
-            {
-               
-               if (symbol - symbols == 2) /* $+ */
-               {
-                  r->backref[l] = capturecount;
-               }
-               else if (symbol - symbols == 3) /* $& */
-               {
-                  r->backref[l] = 0;
-               }
-               else /* $' or $` */
-               {
-                  r->backref[l] = PCRS_MAX_SUBMATCHES + 1 - (symbol - symbols);
-               }
-               i += 2;
-            }
-
-            /* Invalid backref -> plain '$' */
-            else
-            {
-               goto plainchar;
-            }
-
-            /* Valid and in range? -> record */
-            if (r->backref[l] < PCRS_MAX_SUBMATCHES + 2)
-            {
-               r->backref_count[r->backref[l]] += 1;
-               r->block_offset[++l] = k;
-            }
-            else
-            {
-               *errptr = PCRS_WARN_BADREF;
-            }   
-            continue;
-         }
-         
-plainchar:
-         /* Plain chars are copied */
-         text[k++] = replacement[i++];
-         quoted = 0;
-      }
-   } /* -END- if (!trivialflag) */
-
-   /*
-    * Finish & return
-    */
-   r->text = text;
-   r->backrefs = l;
-   r->length = (size_t)k;
-   r->block_length[l] = (size_t)(k - r->block_offset[l]);
-
-   return r;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_free_job
- *
- * Description :  Frees the memory used by a pcrs_job struct and its
- *                dependant structures.
- *
- * Parameters  :
- *          1  :  job = pointer to the pcrs_job structure to be freed
- *
- * Returns     :  a pointer to the next job, if there was any, or
- *                NULL otherwise. 
- *
- *********************************************************************/
-pcrs_job *pcrs_free_job(pcrs_job *job)
-{
-   pcrs_job *next;
-
-   if (job == NULL)
-   {
-      return NULL;
-   }
-   else
-   {
-      next = job->next;
-      if (job->pattern != NULL) free(job->pattern);
-      if (job->hints != NULL) free(job->hints);
-      if (job->substitute != NULL)
-      {
-         if (job->substitute->text != NULL) free(job->substitute->text);
-         free(job->substitute);
-      }
-      free(job);
-   }
-   return next;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_free_joblist
- *
- * Description :  Iterates through a chained list of pcrs_job's and
- *                frees them using pcrs_free_job.
- *
- * Parameters  :
- *          1  :  joblist = pointer to the first pcrs_job structure to
- *                be freed
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void pcrs_free_joblist(pcrs_job *joblist)
-{
-   while ( NULL != (joblist = pcrs_free_job(joblist)) ) {};
-
-   return;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_compile_command
- *
- * Description :  Parses a string with a Perl-style s/// command, 
- *                calls pcrs_compile, and returns a corresponding
- *                pcrs_job, or NULL if parsing or compiling the job
- *                fails.
- *
- * Parameters  :
- *          1  :  command = string with perl-style s/// command
- *          2  :  errptr = pointer to an integer in which error
- *                         conditions can be returned.
- *
- * Returns     :  a corresponding pcrs_job data structure, or NULL
- *                if an error was encountered. In that case, *errptr
- *                has the reason.
- *
- *********************************************************************/
-pcrs_job *pcrs_compile_command(const char *command, int *errptr)
-{
-   int i, k, l, quoted = FALSE;
-   size_t limit;
-   char delimiter;
-   char *tokens[4];   
-   pcrs_job *newjob;
-   
-   i = k = l = 0;
-   
-   /*
-    * Tokenize the perl command
-    */
-   limit = strlen(command);
-   if (limit < 4)
-   {
-      *errptr = PCRS_ERR_CMDSYNTAX;
-      return NULL;
-   }
-   else
-   {
-      delimiter = command[1];
-   }
-
-   tokens[l] = (char *) malloc(limit + 1);
-
-   for (i = 0; i <= (int)limit; i++)
-   {
-      
-      if (command[i] == delimiter && !quoted)
-      {
-         if (l == 3)
-         {
-            l = -1;
-            break;
-         }
-         tokens[0][k++] = '\0';
-         tokens[++l] = tokens[0] + k;
-         continue;
-      }
-      
-      else if (command[i] == '\\' && !quoted)
-      {
-         quoted = TRUE;
-         if (command[i+1] == delimiter) continue;
-      }
-      else
-      {
-         quoted = FALSE;
-      }
-      tokens[0][k++] = command[i];
-   }
-
-   /*
-    * Syntax error ?
-    */
-   if (l != 3)
-   {
-      *errptr = PCRS_ERR_CMDSYNTAX;
-      free(tokens[0]);
-      return NULL;
-   }
-   
-   newjob = pcrs_compile(tokens[1], tokens[2], tokens[3], errptr);
-   free(tokens[0]);
-   return newjob;
-   
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_compile
- *
- * Description :  Takes the three arguments to a perl s/// command
- *                and compiles a pcrs_job structure from them.
- *
- * Parameters  :
- *          1  :  pattern = string with perl-style pattern
- *          2  :  substitute = string with perl-style substitute
- *          3  :  options = string with perl-style options
- *          4  :  errptr = pointer to an integer in which error
- *                         conditions can be returned.
- *
- * Returns     :  a corresponding pcrs_job data structure, or NULL
- *                if an error was encountered. In that case, *errptr
- *                has the reason.
- *
- *********************************************************************/
-pcrs_job *pcrs_compile(const char *pattern, const char *substitute, const char *options, int *errptr)
-{
-   pcrs_job *newjob;
-   int flags;
-   int capturecount;
-   const char *error;
-
-   *errptr = 0;
-
-   /* 
-    * Handle NULL arguments
-    */
-   if (pattern == NULL) pattern = "";
-   if (substitute == NULL) substitute = "";
-
-
-   /* 
-    * Get and init memory
-    */
-   if (NULL == (newjob = (pcrs_job *)malloc(sizeof(pcrs_job))))
-   {
-      *errptr = PCRS_ERR_NOMEM;
-      return NULL;
-   }
-   memset(newjob, '\0', sizeof(pcrs_job));
-
-
-   /*
-    * Evaluate the options
-    */
-   newjob->options = pcrs_parse_perl_options(options, &flags);
-   newjob->flags = flags;
-
-
-   /*
-    * Compile the pattern
-    */
-   newjob->pattern = pcre_compile(pattern, newjob->options, &error, errptr, NULL);
-   if (newjob->pattern == NULL)
-   {
-      pcrs_free_job(newjob);
-      return NULL;
-   }
-
-
-   /*
-    * Generate hints. This has little overhead, since the
-    * hints will be NULL for a boring pattern anyway.
-    */
-   newjob->hints = pcre_study(newjob->pattern, 0, &error);
-   if (error != NULL)
-   {
-      *errptr = PCRS_ERR_STUDY;
-      pcrs_free_job(newjob);
-      return NULL;
-   }
- 
-
-   /* 
-    * Determine the number of capturing subpatterns. 
-    * This is needed for handling $+ in the substitute.
-    */
-   if (0 > (*errptr = pcre_fullinfo(newjob->pattern, newjob->hints, PCRE_INFO_CAPTURECOUNT, &capturecount)))
-   {
-      pcrs_free_job(newjob);
-      return NULL;
-   }
- 
-
-   /*
-    * Compile the substitute
-    */
-   if (NULL == (newjob->substitute = pcrs_compile_replacement(substitute, newjob->flags & PCRS_TRIVIAL, capturecount, errptr)))
-   {
-      pcrs_free_job(newjob);
-      return NULL;
-   }
- 
-   return newjob;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_execute_list
- *
- * Description :  This is a multiple job wrapper for pcrs_execute().
- *                Apply the regular substitutions defined by the jobs in
- *                the joblist to the subject.
- *                The subject itself is left untouched, memory for the result
- *                is malloc()ed and it is the caller's responsibility to free
- *                the result when it's no longer needed. 
- *
- *                Note: For convenient string handling, a null byte is
- *                      appended to the result. It does not count towards the
- *                      result_length, though.
- *
- *
- * Parameters  :
- *          1  :  joblist = the chained list of pcrs_jobs to be executed
- *          2  :  subject = the subject string
- *          3  :  subject_length = the subject's length 
- *          4  :  result = char** for returning  the result 
- *          5  :  result_length = size_t* for returning the result's length
- *
- * Returns     :  On success, the number of substitutions that were made.
- *                 May be > 1 if job->flags contained PCRS_GLOBAL
- *                On failure, the (negative) pcre error code describing the
- *                 failure, which may be translated to text using pcrs_strerror().
- *
- *********************************************************************/
-int pcrs_execute_list(pcrs_job *joblist, char *subject, size_t subject_length, char **result, size_t *result_length)
-{
-   pcrs_job *job;
-   char *old, *new = NULL;
-   int hits, total_hits;
- 
-   old = subject;
-   *result_length = subject_length;
-   hits = total_hits = 0;
-
-   for (job = joblist; job != NULL; job = job->next)
-   {
-      hits = pcrs_execute(job, old, *result_length, &new, result_length);
-
-      if (old != subject) free(old);
-
-      if (hits < 0)
-      {
-         return(hits);
-      }
-      else
-      {
-         total_hits += hits;
-         old = new;
-      }
-   }
-
-   *result = new;
-   return(total_hits);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_execute
- *
- * Description :  Apply the regular substitution defined by the job to the
- *                subject.
- *                The subject itself is left untouched, memory for the result
- *                is malloc()ed and it is the caller's responsibility to free
- *                the result when it's no longer needed.
- *
- *                Note: For convenient string handling, a null byte is
- *                      appended to the result. It does not count towards the
- *                      result_length, though.
- *
- * Parameters  :
- *          1  :  job = the pcrs_job to be executed
- *          2  :  subject = the subject (== original) string
- *          3  :  subject_length = the subject's length 
- *          4  :  result = char** for returning  the result 
- *          5  :  result_length = size_t* for returning the result's length
- *
- * Returns     :  On success, the number of substitutions that were made.
- *                 May be > 1 if job->flags contained PCRS_GLOBAL
- *                On failure, the (negative) pcre error code describing the
- *                 failure, which may be translated to text using pcrs_strerror().
- *
- *********************************************************************/
-int pcrs_execute(pcrs_job *job, const char *subject, size_t subject_length, char **result, size_t *result_length)
-{
-   int offsets[3 * PCRS_MAX_SUBMATCHES],
-       offset,
-       i, k,
-       matches_found,
-       submatches,
-       max_matches = PCRS_MAX_MATCH_INIT;
-   size_t newsize;
-   pcrs_match *matches, *dummy;
-   char *result_offset;
-
-   offset = i = k = 0;
-
-   /* 
-    * Sanity check & memory allocation
-    */
-   if (job == NULL || job->pattern == NULL || job->substitute == NULL || NULL == subject)
-   {
-      *result = NULL;
-      return(PCRS_ERR_BADJOB);
-   }
-
-   if (NULL == (matches = (pcrs_match *)malloc((size_t)max_matches * sizeof(pcrs_match))))
-   {
-      *result = NULL;
-      return(PCRS_ERR_NOMEM);
-   }
-   memset(matches, '\0', (size_t)max_matches * sizeof(pcrs_match));
-
-
-   /*
-    * Find the pattern and calculate the space
-    * requirements for the result
-    */
-   newsize = subject_length;
-
-   while ((submatches = pcre_exec(job->pattern, job->hints, subject, (int)subject_length, offset, 0, offsets, 3 * PCRS_MAX_SUBMATCHES)) > 0)
-   {
-      job->flags |= PCRS_SUCCESS;
-      matches[i].submatches = submatches;
-
-      for (k = 0; k < submatches; k++)
-      {
-         matches[i].submatch_offset[k] = offsets[2 * k];
-
-         /* Note: Non-found optional submatches have length -1-(-1)==0 */
-         matches[i].submatch_length[k] = (size_t)(offsets[2 * k + 1] - offsets[2 * k]); 
-
-         /* reserve mem for each submatch as often as it is ref'd */
-         newsize += matches[i].submatch_length[k] * (size_t)job->substitute->backref_count[k];
-      }
-      /* plus replacement text size minus match text size */
-      newsize += job->substitute->length - matches[i].submatch_length[0]; 
-
-      /* chunk before match */
-      matches[i].submatch_offset[PCRS_MAX_SUBMATCHES] = 0;
-      matches[i].submatch_length[PCRS_MAX_SUBMATCHES] = (size_t)offsets[0];
-      newsize += (size_t)offsets[0] * (size_t)job->substitute->backref_count[PCRS_MAX_SUBMATCHES];
-
-      /* chunk after match */
-      matches[i].submatch_offset[PCRS_MAX_SUBMATCHES + 1] = offsets[1];
-      matches[i].submatch_length[PCRS_MAX_SUBMATCHES + 1] = subject_length - (size_t)offsets[1] - 1;
-      newsize += (subject_length - (size_t)offsets[1]) * (size_t)job->substitute->backref_count[PCRS_MAX_SUBMATCHES + 1];
-
-      /* Storage for matches exhausted? -> Extend! */
-      if (++i >= max_matches)
-      {
-         max_matches = (int)(max_matches * PCRS_MAX_MATCH_GROW);
-         if (NULL == (dummy = (pcrs_match *)realloc(matches, (size_t)max_matches * sizeof(pcrs_match))))
-         {
-            free(matches);
-            *result = NULL;
-            return(PCRS_ERR_NOMEM);
-         }
-         matches = dummy;
-      }
-
-      /* Non-global search or limit reached? */
-      if (!(job->flags & PCRS_GLOBAL)) break;
-
-      /* Don't loop on empty matches */
-      if (offsets[1] == offset)
-         if ((size_t)offset < subject_length)
-            offset++;
-         else
-            break;
-      /* Go find the next one */
-      else
-         offset = offsets[1];
-   }
-   /* Pass pcre error through if (bad) failiure */
-   if (submatches < PCRE_ERROR_NOMATCH)
-   {
-      free(matches);
-      return submatches;   
-   }
-   matches_found = i;
-
-
-   /* 
-    * Get memory for the result (must be freed by caller!)
-    * and append terminating null byte.
-    */
-   if ((*result = (char *)malloc(newsize + 1)) == NULL)
-   {
-      free(matches);
-      return PCRS_ERR_NOMEM;
-   }
-   else
-   {
-      (*result)[newsize] = '\0';
-   }
-
-
-   /* 
-    * Replace
-    */
-   offset = 0;
-   result_offset = *result;
-
-   for (i = 0; i < matches_found; i++)
-   {
-      /* copy the chunk preceding the match */
-      memcpy(result_offset, subject + offset, (size_t)(matches[i].submatch_offset[0] - offset)); 
-      result_offset += matches[i].submatch_offset[0] - offset;
-
-      /* For every segment of the substitute.. */
-      for (k = 0; k <= job->substitute->backrefs; k++)
-      {
-         /* ...copy its text.. */
-         memcpy(result_offset, job->substitute->text + job->substitute->block_offset[k], job->substitute->block_length[k]);
-         result_offset += job->substitute->block_length[k];
-
-         /* ..plus, if it's not the last chunk, i.e.: There *is* a backref.. */
-         if (k != job->substitute->backrefs
-             /* ..in legal range.. */
-             && job->substitute->backref[k] < PCRS_MAX_SUBMATCHES + 2
-             /* ..and referencing a real submatch.. */
-             && job->substitute->backref[k] < matches[i].submatches
-             /* ..that is nonempty.. */
-             && matches[i].submatch_length[job->substitute->backref[k]] > 0)
-         {
-            /* ..copy the submatch that is ref'd. */
-            memcpy(
-               result_offset,
-               subject + matches[i].submatch_offset[job->substitute->backref[k]],
-               matches[i].submatch_length[job->substitute->backref[k]]
-            );
-            result_offset += matches[i].submatch_length[job->substitute->backref[k]];
-         }
-      }
-      offset =  matches[i].submatch_offset[0] + (int)matches[i].submatch_length[0];
-   }
-
-   /* Copy the rest. */
-   memcpy(result_offset, subject + offset, subject_length - (size_t)offset);
-
-   *result_length = newsize;
-   free(matches);
-   return matches_found;
-
-}
-
-
-#define is_hex_digit(x) ((x) && strchr("0123456789ABCDEF", toupper(x)))
-
-/*********************************************************************
- *
- * Function    :  is_hex_sequence
- *
- * Description :  Checks the first four characters of a string
- *                and decides if they are a valid hex sequence
- *                (like '\x40').
- *
- * Parameters  :
- *          1  :  sequence = The string to check
- *
- * Returns     :  Non-zero if it's valid sequence, or
- *                Zero if it isn't.
- *
- *********************************************************************/
-static int is_hex_sequence(const char *sequence)
-{
-   return (sequence[0] == '\\' &&
-           sequence[1] == 'x'  &&
-           is_hex_digit(sequence[2]) &&
-           is_hex_digit(sequence[3]));
-}
-
-
-/*
- * Functions below this line are only part of the pcrs version
- * included in Privoxy. If you use any of them you should not
- * try to dynamically link against external pcrs versions.
- */
-
-/*********************************************************************
- *
- * Function    :  pcrs_job_is_dynamic
- *
- * Description :  Checks if a job has the "D" (dynamic) option set.
- *
- * Parameters  :
- *          1  :  job = The job to check
- *
- * Returns     :  TRUE if the job is indeed dynamic, otherwise
- *                FALSE
- *
- *********************************************************************/
-int pcrs_job_is_dynamic (char *job)
-{
-   const char delimiter = job[1];
-   const size_t length = strlen(job);
-   char *option;
-
-   if (length < 5)
-   {
-      /*
-       * The shortest valid (but useless)
-       * dynamic pattern is "s@@@D"
-       */
-      return FALSE;
-   }
-
-   /*
-    * Everything between the last character
-    * and the last delimiter is an option ...
-    */
-   for (option = job + length; *option != delimiter; option--)
-   {
-      if (*option == 'D')
-      {
-         /*
-          * ... and if said option is 'D' the job is dynamic.
-          */
-         return TRUE;
-      }
-   }
-   return FALSE;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_get_delimiter
- *
- * Description :  Tries to find a character that is safe to
- *                be used as a pcrs delimiter for a certain string.
- *
- * Parameters  :
- *          1  :  string = The string to search in
- *
- * Returns     :  A safe delimiter if one was found, otherwise '\0'.  
- *
- *********************************************************************/
-char pcrs_get_delimiter(const char *string)
-{
-   /*
-    * Some characters that are unlikely to
-    * be part of pcrs replacement strings.
-    */
-   char delimiters[] = "><§#+*~%^°-:;µ!@";
-   char *d = delimiters;
-
-   /* Take the first delimiter that isn't part of the string */
-   while (*d && NULL != strchr(string, *d))
-   {
-      d++;
-   }
-   return *d;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  pcrs_execute_single_command
- *
- * Description :  Apply single pcrs command to the subject.
- *                The subject itself is left untouched, memory for the result
- *                is malloc()ed and it is the caller's responsibility to free
- *                the result when it's no longer needed.
- *
- * Parameters  :
- *          1  :  subject = the subject (== original) string
- *          2  :  pcrs_command = the pcrs command as string (s@foo@bar@) 
- *          3  :  hits = int* for returning  the number of modifications 
- *
- * Returns     :  NULL in case of errors, otherwise the
- *                result of the pcrs command.  
- *
- *********************************************************************/
-char *pcrs_execute_single_command(const char *subject, const char *pcrs_command, int *hits)
-{
-   size_t size;
-   char *result = NULL;
-   pcrs_job *job;
-
-   assert(subject);
-   assert(pcrs_command);
-
-   *hits = 0;
-   size = strlen(subject);
-
-   job = pcrs_compile_command(pcrs_command, hits);
-   if (NULL != job)
-   {
-      *hits = pcrs_execute(job, subject, size, &result, &size);
-      if (*hits < 0)
-      {
-         freez(result);
-      }
-      pcrs_free_job(job);
-   }
-   return result;
-
-}
-
-
-static const char warning[] = "... [too long, truncated]";
-/*********************************************************************
- *
- * Function    :  pcrs_compile_dynamic_command
- *
- * Description :  Takes a dynamic pcrs command, fills in the
- *                values of the variables and compiles it.
- *
- * Parameters  :
- *          1  :  csp = Current client state (buffers, headers, etc...)
- *          2  :  pcrs_command = The dynamic pcrs command to compile
- *          3  :  v = NULL terminated array of variables and their values.
- *          4  :  error = pcrs error code
- *
- * Returns     :  NULL in case of hard errors, otherwise the
- *                compiled pcrs job.   
- *
- *********************************************************************/
-pcrs_job *pcrs_compile_dynamic_command(char *pcrs_command, const struct pcrs_variable v[], int *error)
-{
-   char buf[PCRS_BUFFER_SIZE];
-   const char *original_pcrs_command = pcrs_command;
-   char *pcrs_command_tmp = NULL;
-   pcrs_job *job = NULL;
-   int truncation = 0;
-   char d;
-   int ret;
-
-   while ((NULL != v->name) && (NULL != pcrs_command))
-   {
-      assert(NULL != v->value);
-
-      if (NULL == strstr(pcrs_command, v->name))
-      {
-         /*
-          * Skip the substitution if the variable
-          * name isn't part of the pattern.
-          */
-         v++;
-         continue;
-      }
-
-      /* Use pcrs to replace the variable with its value. */
-      d = pcrs_get_delimiter(v->value);
-      if ('\0' == d)
-      {
-         /* No proper delimiter found */
-         *error = PCRS_ERR_CMDSYNTAX;
-         return NULL;
-      }
-
-      /*
-       * Variable names are supposed to contain alpha
-       * numerical characters plus '_' only.
-       */
-      assert(NULL == strchr(v->name, d));
-
-      ret = snprintf(buf, sizeof(buf), "s%c\\$%s%c%s%cgT", d, v->name, d, v->value, d);
-      assert(ret >= 0);
-      if (ret >= sizeof(buf))
-      {
-         /*
-          * Value didn't completely fit into buffer,
-          * overwrite the end of the substitution text
-          * with a truncation message and close the pattern
-          * properly.
-          */
-         const size_t trailer_size = sizeof(warning) + 3; /* 3 for d + "gT" */
-         char *trailer_start = buf + sizeof(buf) - trailer_size;
-
-         ret = snprintf(trailer_start, trailer_size, "%s%cgT", warning, d);
-         assert(ret == trailer_size - 1);
-         assert(sizeof(buf) == strlen(buf) + 1);
-         truncation = 1;
-      }
-
-      pcrs_command_tmp = pcrs_execute_single_command(pcrs_command, buf, error);
-      if (NULL == pcrs_command_tmp)
-      {
-         return NULL;
-      }
-
-      if (pcrs_command != original_pcrs_command)
-      {
-         freez(pcrs_command);
-      }
-      pcrs_command = pcrs_command_tmp;
-
-      v++;
-   }
-
-   job = pcrs_compile_command(pcrs_command, error);
-   if (pcrs_command != original_pcrs_command)
-   {
-      freez(pcrs_command);
-   }
-
-   if (truncation)
-   {
-      *error = PCRS_WARN_TRUNCATION;
-   }
-
-   return job;
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/pcrs.h b/external/privoxy/pcrs.h
deleted file mode 100644
index b8939c0..0000000
--- a/external/privoxy/pcrs.h
+++ /dev/null
@@ -1,221 +0,0 @@
-#ifndef PCRS_H_INCLUDED
-#define PCRS_H_INCLUDED
-
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/pcrs.h,v $
- *
- * Purpose     :  Header file for pcrs.c
- *
- * Copyright   :  see pcrs.c
- *
- * Revisions   :
- *    $Log: pcrs.h,v $
- *    Revision 1.16  2007/04/30 15:02:19  fabiankeil
- *    Introduce dynamic pcrs jobs that can resolve variables.
- *
- *    Revision 1.15  2007/01/05 15:46:12  fabiankeil
- *    Don't use strlen() to calculate the length of
- *    the pcrs substitutes. They don't have to be valid C
- *    strings and getting their length wrong can result in
- *    user-controlled memory corruption.
- *
- *    Thanks to Felix Gröbert for reporting the problem
- *    and providing the fix [#1627140].
- *
- *    Revision 1.14  2006/12/24 17:27:37  fabiankeil
- *    Increase pcrs error code offset to prevent overlaps
- *    with pcre versions newer than our own.
- *
- *    Revision 1.13  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.11  2002/03/08 14:18:23  oes
- *    Fixing -Wconversion warnings
- *
- *    Revision 1.10  2002/03/08 13:44:48  oes
- *    Hiding internal functions, preventing double inclusion of pcre.h
- *
- *    Revision 1.9  2001/08/18 11:35:29  oes
- *    - Introduced pcrs_strerror()
- *    - added pcrs_execute_list()
- *
- *    Revision 1.8  2001/08/15 15:32:50  oes
- *    Replaced the hard limit for the maximum number of matches
- *    by dynamic reallocation
- *
- *    Revision 1.7  2001/08/05 13:13:11  jongfoster
- *    Making parameters "const" where possible.
- *
- *    Revision 1.6  2001/07/29 18:52:06  jongfoster
- *    Renaming _PCRS_H, and adding "extern C {}"
- *
- *    Revision 1.5  2001/07/18 17:27:00  oes
- *    Changed interface; Cosmetics
- *
- *    Revision 1.4  2001/06/29 13:33:19  oes
- *    - Cleaned up, commented and adapted to reflect the
- *      changes in pcrs.c
- *    - Introduced the PCRS_* flags
- *
- *    Revision 1.3  2001/06/09 10:58:57  jongfoster
- *    Removing a single unused #define which referenced BUFSIZ
- *
- *    Revision 1.2  2001/05/25 11:03:55  oes
- *    Added sanity check for NULL jobs to pcrs_exec_substitution
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:02  oes
- *    Initial import of version 2.9.3 source tree
- *
- *    Revision 1.4  2001/05/11 01:57:02  rodney
- *    Added new file header standard w/RCS control tags.
- *
- *    revision 1.3  2001/05/08 02:38:13  rodney
- *    Changed C++ "//" style comment to C style comments.
- *
- *    revision 1.2  2001/04/30 02:39:24  rodney
- *    Made this pcrs.h file conditionally included.
- *
- *    revision 1.1  2001/04/16 21:10:38  rodney
- *    Initial checkin
- *
- *********************************************************************/
-
-#define PCRS_H_VERSION "$Id: pcrs.h,v 1.16 2007/04/30 15:02:19 fabiankeil Exp $"
-
-
-#ifndef _PCRE_H
-#include <pcre.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Constants:
- */
-
-#define FALSE 0
-#define TRUE 1
-
-/* Capacity */
-#define PCRS_MAX_SUBMATCHES  33     /* Maximum number of capturing subpatterns allowed. MUST be <= 99! FIXME: Should be dynamic */
-#define PCRS_MAX_MATCH_INIT  40     /* Initial amount of matches that can be stored in global searches */
-#define PCRS_MAX_MATCH_GROW  1.6    /* Factor by which storage for matches is extended if exhausted */
-
-/*
- * PCRS error codes
- *
- * They are supposed to be handled together with PCRE error
- * codes and have to start with an offset to prevent overlaps.
- *
- * PCRE 6.7 uses error codes from -1 to -21, PCRS error codes
- * below -100 should be safe for a while.
- */
-#define PCRS_ERR_NOMEM           -100      /* Failed to acquire memory. */
-#define PCRS_ERR_CMDSYNTAX       -101      /* Syntax of s///-command */
-#define PCRS_ERR_STUDY           -102      /* pcre error while studying the pattern */
-#define PCRS_ERR_BADJOB          -103      /* NULL job pointer, pattern or substitute */
-#define PCRS_WARN_BADREF         -104      /* Backreference out of range */
-#define PCRS_WARN_TRUNCATION     -105      /* At least one pcrs variable was too big,
-                                            * only the first part was used. */
-
-/* Flags */
-#define PCRS_GLOBAL          1      /* Job should be applied globally, as with perl's g option */
-#define PCRS_TRIVIAL         2      /* Backreferences in the substitute are ignored */
-#define PCRS_SUCCESS         4      /* Job did previously match */
-
-
-/*
- * Data types:
- */
-
-/* A compiled substitute */
-
-typedef struct {
-  char  *text;                                   /* The plaintext part of the substitute, with all backreferences stripped */
-  size_t length;                                 /* The substitute may not be a valid C string so we can't rely on strlen(). */
-  int    backrefs;                               /* The number of backreferences */
-  int    block_offset[PCRS_MAX_SUBMATCHES];      /* Array with the offsets of all plaintext blocks in text */
-  size_t block_length[PCRS_MAX_SUBMATCHES];      /* Array with the lengths of all plaintext blocks in text */
-  int    backref[PCRS_MAX_SUBMATCHES];           /* Array with the backref number for all plaintext block borders */
-  int    backref_count[PCRS_MAX_SUBMATCHES + 2]; /* Array with the number of references to each backref index */
-} pcrs_substitute;
-
-
-/*
- * A match, including all captured subpatterns (submatches)
- * Note: The zeroth is the whole match, the PCRS_MAX_SUBMATCHES + 0th
- * is the range before the match, the PCRS_MAX_SUBMATCHES + 1th is the
- * range after the match.
- */
-
-typedef struct {
-  int    submatches;                               /* Number of captured subpatterns */
-  int    submatch_offset[PCRS_MAX_SUBMATCHES + 2]; /* Offset for each submatch in the subject */
-  size_t submatch_length[PCRS_MAX_SUBMATCHES + 2]; /* Length of each submatch in the subject */
-} pcrs_match;
-
-
-/* A PCRS job */
-
-typedef struct PCRS_JOB {
-  pcre *pattern;                            /* The compiled pcre pattern */
-  pcre_extra *hints;                        /* The pcre hints for the pattern */
-  int options;                              /* The pcre options (numeric) */
-  int flags;                                /* The pcrs and user flags (see "Flags" above) */
-  pcrs_substitute *substitute;              /* The compiled pcrs substitute */
-  struct PCRS_JOB *next;                    /* Pointer for chaining jobs to joblists */
-} pcrs_job;
-
-
-/*
- * Prototypes:
- */
-
-/* Main usage */
-extern pcrs_job        *pcrs_compile_command(const char *command, int *errptr);
-extern pcrs_job        *pcrs_compile(const char *pattern, const char *substitute, const char *options, int *errptr);
-extern int              pcrs_execute(pcrs_job *job, const char *subject, size_t subject_length, char **result, size_t *result_length);
-extern int              pcrs_execute_list(pcrs_job *joblist, char *subject, size_t subject_length, char **result, size_t *result_length);
-
-/* Freeing jobs */
-extern pcrs_job        *pcrs_free_job(pcrs_job *job);
-extern void             pcrs_free_joblist(pcrs_job *joblist);
-
-/* Info on errors: */
-extern const char *pcrs_strerror(const int error);
-
-extern int pcrs_job_is_dynamic(char *job);
-extern char pcrs_get_delimiter(const char *string);
-extern char *pcrs_execute_single_command(const char *subject, const char *pcrs_command, int *hits);
-/*
- * Variable/value pair for dynamic pcrs commands.
- */
-struct pcrs_variable
-{
-   const char *name;
-   char *value;
-   int static_value;
-};
-
-extern pcrs_job *pcrs_compile_dynamic_command(char *pcrs_command, const struct pcrs_variable v[], int *error);
-
-/* Only relevant for maximum pcrs variable size */
-#ifndef PCRS_BUFFER_SIZE
-#define PCRS_BUFFER_SIZE 4000
-#endif /* ndef PCRS_BUFFER_SIZE */
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef PCRS_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/privoxy-generic.init b/external/privoxy/privoxy-generic.init
deleted file mode 100755
index 53b4127..0000000
--- a/external/privoxy/privoxy-generic.init
+++ /dev/null
@@ -1,182 +0,0 @@
-#!/bin/sh 
-# 
-#  ********************************************************************
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/privoxy-generic.init,v $
-# 
-#  Purpose     :  This shell script takes care of starting and stopping
-#                 privoxy.
-# 
-#  Copyright   :  Written by and Copyright (C) 2001,2002 the SourceForge
-#                 Privoxy team. http://www.privoxy.org/
-# 
-#                 Based on the Internet Junkbuster originally written
-#                 by and Copyright (C) 1997 Anonymous Coders and
-#                 Junkbusters Corporation.  http://www.junkbusters.com
-# 
-#                 This program is free software; you can redistribute it
-#                 and/or modify it under the terms of the GNU General
-#                 Public License as published by the Free Software
-#                 Foundation; either version 2 of the License, or (at
-#                 your option) any later version.
-# 
-#                 This program is distributed in the hope that it will
-#                 be useful, but WITHOUT ANY WARRANTY; without even the
-#                 implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                 PARTICULAR PURPOSE.  See the GNU General Public
-#                 License for more details.
-# 
-#                 The GNU General Public License should be included with
-#                 this file.  If not, you can view it at
-#                 http://www.gnu.org/copyleft/gpl.html
-#                 or write to the Free Software Foundation, Inc., 59
-#                 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Developer's NOTE: This script should be tested against a true /bin/sh, which
-# has notable differences from bash. By design, this script does not try to do
-# too much, so as to be as cross-platform as possible.
-#
-# 
-#  Revisions   :
-#     $Log: privoxy-generic.init,v $
-#     Revision 1.8  2007/06/09 12:35:54  fabiankeil
-#     Add /usr/xpg4/bin to the PATH to make sure the POSIX
-#     version of id is used on Solaris. Closes BR#1733788.
-#     Thanks to Brent Chivers for report and fix.
-#
-#     Revision 1.7  2006/10/14 14:12:22  fabiankeil
-#     Print warnings if the user tries to run Privoxy as root
-#     or if the script is run without root privileges;
-#     only use "--user" if run with root privileges and
-#     don't depend on $USER being set to root. Fixes BR 779781.
-#
-#     Apparently $USER isn't set on all systems,
-#     but it also didn't work if the user only
-#     increased her privileges with su or sudo,
-#     but still had her real uid in $USER.
-#
-#     Thanks to Florian Effenberger for reporting.
-#
-#     Revision 1.6  2006/07/18 14:48:47  david__schmidt
-#     Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#     with what was really the latest development (the v_3_0_branch branch)
-#
-#     Revision 1.5.2.1  2002/10/17 17:04:22  hal9
-#     Add from main trunk. Will be needed for make install.
-#
-#     Revision 1.5  2002/10/17 17:01:29  hal9
-#     Set paths to match the defaults for a root install. Force remove PIDFILE on
-#     stop.
-#
-#     Revision 1.4  2002/09/11 01:15:02  hal9
-#     Fix typo in variable. Now tested on Solaris and Linux, with defaults.
-#
-#     Revision 1.3  2002/09/11 01:09:14  hal9
-#     Better handling of pidfile, and process owner.
-#
-#     Revision 1.2  2002/09/08 20:27:58  hal9
-#     -Rewrote script config section.
-#     -Added comments to script.
-#     -Tried to add logic to use a --user privoxy, if available.
-#     -Minor script changes due to 'echo -n' does not work on a true
-#      /bin/sh system.
-#
-#     Revision 1.1  2002/09/06 00:20:26  hal9
-#     Creating a generic init script, meant to be used on platforms where don't have
-#     a custom init script.
-#
-#     Revision 1.0  2002/09/05 17:14:32  hal9
-#
-#######################################################################
-
-# Is this needed by Solaris?
-#ident  "@(#)privoxy  1.0     02/09/05"
-
-# NOTE: This script may require editing to ensure proper location of 
-# config file, and the privoxy executable. Care should be taken to ensure 
-# logfile is writable by $P_USER (logfile is defined in config), and that 
-# there is suitable write access for $P_PIDFILE.
-
-PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/xpg4/bin:/usr/bin:/sbin:/bin
-P_NAME=Privoxy
-# Path to executable.
-P_DAEMON=privoxy
-# Full path to location of Privoxy config file. 
-P_CONF_FILE=/usr/local/etc/privoxy/config
-# Full path to PID file location. Location must be writable by 
-# whoever runs this script and by Privoxy itself.
-P_PIDFILE=/var/run/privoxy.pid
-# If uncommented, this script will try to run as USER=privoxy, which
-# may require special handling of config, *.action, trust, logfile, 
-# jarfile, and pidfile.
-P_USER=privoxy
-
-# If a privoxy user is specified, lets try that. /bin/sh does not seem to 
-# know about $UID.
-if [ 0 = `id -u` ]; then
-  if [ -n "$P_USER" ]; then
-    id $P_USER 2>/dev/null >/dev/null
-    if [ $? -eq 0 ]; then
-      P_USER_SETTINGS="--user $P_USER"
-    else
-      echo "User $P_USER doesn't exist, exiting."
-      exit 1
-    fi 
-  else
-    # The user has sufficient rights, but $P_USER isn't set
-    echo "Running Privoxy as root is not recommended!" 
-    P_USER_SETTINGS=""
-  fi
-else
-  # The user has insufficient rights to run Privoxy as $P_USER
-  # and may not be able to write or delete the PID file.
-  echo "You aren't root, expect trouble!"
-  P_USER_SETTINGS=""
-fi
-
-if [ ! -f $P_CONF_FILE ]; then
-  echo "Can't find $P_CONF_FILE, exiting."
-  exit 1
-fi
-
-case "$1" in
- 
- start)
-     if [ -f $P_PIDFILE ]; then
-       if kill -0 `cat $P_PIDFILE`; then
-         echo "Error: $P_NAME is already running, exiting."
-         exit 1
-       else
-         rm -f $P_PIDFILE
-       fi
-     fi
-
-	$P_DAEMON --pidfile $P_PIDFILE $P_USER_SETTINGS $P_CONF_FILE 2>/dev/null
-     
-     if [ $? -eq 0 ]; then
-       echo "Starting $P_NAME, OK." 
-     else
-       echo "Starting $P_NAME, Failed."
-       rm -f $P_PIDFILE
-     fi
-     ;;
- 
- restart)
-     $0 stop
-     $0 start
-     ;;
- 
- stop)
-     test ! -f $P_PIDFILE && echo "No $P_PIDFILE file found, exiting." && exit 1
-     kill `cat $P_PIDFILE` && rm -f $P_PIDFILE && \
-     echo "Stopping $P_NAME, OK." || echo "Stopping $P_NAME, failed."
-     ;;
- 
- *)
-     echo "Usage: $0 {start|stop|restart}"
-     exit 1
-     ;;
-
-esac
-
-exit 0
diff --git a/external/privoxy/privoxy-rh.spec b/external/privoxy/privoxy-rh.spec
deleted file mode 100644
index 40c82b4..0000000
--- a/external/privoxy/privoxy-rh.spec
+++ /dev/null
@@ -1,1196 +0,0 @@
-# $Id: privoxy-rh.spec,v 1.63 2009/03/21 10:46:15 fabiankeil Exp $
-#
-# Written by and Copyright (C) 2001-2006 the SourceForge
-# Privoxy team. http://www.privoxy.org/
-#
-# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and 
-# Junkbusters Corporation.  http://www.junkbusters.com
-#
-# This program is free software; you can redistribute it 
-# and/or modify it under the terms of the GNU General
-# Public License as published by the Free Software
-# Foundation; either version 2 of the License, or (at
-# your option) any later version.
-#
-# This program is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.  See the GNU General Public
-# License for more details.
-#
-# The GNU General Public License should be included with
-# this file.  If not, you can view it at
-# http://www.gnu.org/copyleft/gpl.html
-# or write to the Free Software Foundation, Inc., 59
-# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-
-# Defines should happen in the begining of the file
-%define veryoldname junkbust
-%define oldname junkbuster
-%define privoxyconf %{_sysconfdir}/%{name}
-%define privoxy_uid 73
-%define privoxy_gid 73
-
-Name: privoxy
-# ATTENTION
-# Version and release should be updated accordingly on configure.in and
-# configure. Otherwise, the package can be build with the wrong value
-Version: 3.0.12
-Release: 1
-Summary: Privoxy - privacy enhancing proxy
-License: GPL
-Source0: http://dl.sf.net/ijbswa/%{name}-%{version}-stable-src.tar.gz
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Group: System Environment/Daemons
-URL: http://www.privoxy.org/
-Obsoletes: junkbuster-raw junkbuster-blank junkbuster
-# Prereq: /usr/sbin/useradd , /sbin/chkconfig , /sbin/service 
-Prereq: shadow-utils, chkconfig, initscripts, sh-utils
-BuildRequires: perl gzip sed libtool autoconf 
-Conflicts: junkbuster-raw junkbuster-blank junkbuster
-
-%description 
-Privoxy is a web proxy with advanced filtering capabilities for
-protecting privacy, filtering web page data, managing cookies,
-controlling access, and removing ads, banners, pop-ups and other
-obnoxious Internet junk. Privoxy has a very flexible configuration and
-can be customized to suit individual needs and tastes. Privoxy has application
-for both stand-alone systems and multi-user networks.
-
-Privoxy is based on the Internet Junkbuster.
-
-%prep
-#%setup -q -c
-%setup -q -n "%{name}-%{version}-stable"
-
-%build
-
-# We check to see if versions match
-VERSION_MAJOR=3
-VERSION_MINOR=0
-VERSION_POINT=12
-
-# find CVS files and remove it.
-find -name CVS | xargs rm -rf
-
-CONFIG_VERSION=`cat configure.in | sed -n -e 's/^VERSION_MAJOR=\([0-9]*\)/\1./p' -e 's/^VERSION_MINOR=\([0-9]*\)/\1./p' -e 's/^VERSION_POINT=\([0-9]*\)/\1/p' | awk '{printf $1}'`
-if [ "%{version}" != "${CONFIG_VERSION}" ]; then
-	echo "The version declared on the specfile does not match the version"
-	echo "declared on configure.in. This should not happen. The build will"
-	echo "be interrupted now, so you can fix it."
-	exit 1
-fi
-autoheader
-autoconf
-%configure --disable-dynamic-pcre
-make 
-# Docs are in CVS and tarball now.
-#%%make dok
-
-## Explicitily stripping is not recomended.
-## This is handled altomaticaly by RPM, and can couse troubles if
-## anyone wants to build an unstriped version - morcego
-#strip %{name}
-
-%install
-[ "%{buildroot}" != "/" ] && rm -rf %{buildroot}
-mkdir -p %{buildroot}%{_sbindir} \
-         %{buildroot}%{_mandir}/man1 \
-         %{buildroot}%{_localstatedir}/log/%{name} \
-         %{buildroot}%{privoxyconf}/templates \
-         %{buildroot}%{_sysconfdir}/logrotate.d \
-         %{buildroot}%{_sysconfdir}/rc.d/init.d 
-
-## Manual gziping of manpages should not be done, once it can
-## break the building on some distributions. Anyway, rpm does it
-## automagicaly these days
-## Gziping the documentation files is not recomended - morcego
-#gzip README AUTHORS ChangeLog %{name}.1 || /bin/true
-
-install -s -m 744 %{name} %{buildroot}%{_sbindir}/%{name}
-
-# Using sed to "convert" from DOS format to UNIX
-# This is important behaviour, and should not be removed without some
-# other assurance that these files don't get packed in the the
-# wrong format
-for i in `ls *.action`
-do
-       cat $i | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/$i
-done
-cat default.filter | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/default.filter
-cat user.filter | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/user.filter
-cat trust | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/trust
-(
-cd templates
-for i in `ls`
-do
-	cat $i | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/templates/$i
-done
-)
-
-cp -f %{name}.1 %{buildroot}%{_mandir}/man1/%{name}.1
-cp -f %{name}.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/%{name}
-install -m 755 %{name}.init %{buildroot}%{_sysconfdir}/rc.d/init.d/%{name}
-install -m 711 -d %{buildroot}%{_localstatedir}/log/%{name}
-
-# verify all file locations, etc. in the config file
-# don't start with ^ or commented lines are not replaced
-## Changing the sed paramter delimiter to @, so we don't have to
-## escape the slashes
-cat config | \
-    sed 's@^confdir.*@confdir %{privoxyconf}@g' | \
-#    sed 's/^permissionsfile.*/permissionsfile \/etc\/%{name}\/permissionsfile/g' | \
-#    sed 's/^filterfile.*/default.filter \/etc\/%{name}\/default.filter/g' | \
-#    sed 's/^logfile.*/logfile \%{_localstatedir}\/log\/%{name}\/logfile/g' | \
-#    sed 's/^forward.*/forward \/etc\/%{name}\/forward/g' | \
-#    sed 's/^aclfile.*/aclfile \/etc\/%{name}\/aclfile/g' > \
-    sed 's@^logdir.*@logdir %{_localstatedir}/log/%{name}@g' | \
-    sed 's@#user-manual http://www.privoxy.org/user-manual/@user-manual %{_docdir}/%{name}-%{version}/user-manual/@g' | \
-    sed -e 's/[[:cntrl:]]*$//' > \
-    %{buildroot}%{privoxyconf}/config
-perl -pe 's/{-no-cookies}/{-no-cookies}\n\.redhat.com/' default.action >\
-    %{buildroot}%{privoxyconf}/default.action
-
-
-## Macros are expanded even on commentaries. So, we have to use %%
-## -- morcego
-#%%makeinstall
-
-%pre
-# This is where we handle old usernames (junkbust and junkbuster)
-# I'm not sure we should do that, but this is the way we have been
-# doing it for some time now -- morcego
-# We should do it for the group as well -- morcego
-# Doing it by brute force. Much cleaner (no more Mr. Nice Guy) -- morcego
-
-# Same for username
-usermod -u %{privoxy_uid} -g %{privoxy_gid} -l %{name} -d %{_sysconfdir}/%{name} -s "" %{oldname} > /dev/null 2>&1 || :
-usermod -u %{privoxy_uid} -g %{privoxy_gid} -l %{name} -d %{_sysconfdir}/%{name} -s "" %{veryoldname} > /dev/null 2>&1 || :
-userdel %{oldname} > /dev/null 2>&1 ||:
-userdel %{veryoldname} > /dev/null 2>&1 ||:
-
-# Change the group name. Remove anything left behind.
-groupmod -g %{privoxy_gid} -n %{name} %{oldname} > /dev/null 2>&1 ||:
-groupmod -g %{privoxy_gid} -n %{name} %{veryoldname} > /dev/null 2>&1 ||:
-groupdel %{oldname} > /dev/null 2>&1 ||:
-groupdel %{veryoldname} > /dev/null 2>&1 ||:
-
-# Doublecheck to see if the group exist, and that it has the correct gid
-/bin/grep -E '^%{name}:' %{_sysconfdir}/group > /dev/null 2>&1
-if [ $? -eq 1 ]; then
-	# Looks like it does not exist. Create it
-	groupadd -g %{privoxy_gid} %{name} > /dev/null 2>&1
-else
-	/bin/grep -E '^%{name}:[^:]*:%{privoxy_gid}:' %{_sysconfdir}/group > /dev/null 2>&1
-	if [ $? -eq 1 ]; then
-		# The group exists, but does not have the correct gid
-		groupmod -g %{privoxy_gid} %{name} > /dev/null 2>&1
-	fi
-fi
-
-# Check to see if everything is okey. Create user if it still does not
-# exist
-id %{name} > /dev/null 2>&1
-if [ $? -eq 1 ]; then
-	%{_sbindir}/useradd -u %{privoxy_uid} -g %{privoxy_gid} -d %{_sysconfdir}/%{name} -r -s "" %{name} > /dev/null 2>&1 
-fi
-
-# Double check that the group has the correct uid
-P_UID=`id -u %{name} 2>/dev/null`
-if [ $P_UID -ne %{privoxy_uid} ]; then
-	%{_sbindir}/usermod -u %{privoxy_uid} %{name}
-fi
-
-# The same for the gid
-P_GID=`id -g %{name} 2>/dev/null`
-if [ $P_GID -ne %{privoxy_gid} ]; then
-	%{_sbindir}/usermod -g %{privoxy_gid} %{name}
-fi
-
-%post
-# for upgrade from 2.0.x
-[ -f %{_localstatedir}/log/%{oldname}/logfile ] && {
-  mv -f %{_localstatedir}/log/%{oldname}/logfile %{_localstatedir}/log/%{name}/logfile ||: ;
-  chown -R %{name}:%{name} %{_localstatedir}/log/%{name} 2>/dev/null ||: ;
-}
-[ -f %{_localstatedir}/log/%{name}/%{name} ] && {
-  mv -f %{_localstatedir}/log/%{name}/%{name} %{_localstatedir}/log/%{name}/logfile ||: ;
-  chown -R %{name}:%{name} %{_sysconfdir}/%{name} 2>/dev/null ||: ;
-}
-/sbin/chkconfig --add privoxy
-if [ "$1" = "1" ]; then
-	/sbin/service %{name} condrestart > /dev/null 2>&1 ||:
-fi
-
-%preun
-/sbin/service %{veryoldname} stop > /dev/null 2>&1 ||:
-/sbin/service %{oldname} stop > /dev/null 2>&1 ||:
-
-if [ "$1" = "0" ]; then
-	/sbin/service %{name} stop > /dev/null 2>&1 ||:
-	/sbin/chkconfig --del privoxy
-fi
-
-%postun
-#if [ "$1" -ge "1" ]; then
-#	/sbin/service %{name} condrestart > /dev/null 2>&1
-#fi
-# We only remove it we this is not an upgrade
-if [ "$1" = "0" ]; then
-	id privoxy > /dev/null 2>&1 && %{_sbindir}/userdel privoxy || /bin/true
-	/bin/grep -E '^%{name}:' %{_sysconfdir}/group > /dev/null && %{_sbindir}/groupdel %{name} || /bin/true
-fi
-
-%clean
-[ "%{buildroot}" != "/" ] && rm -rf %{buildroot}
-
-%files
-%defattr(0644,root,root,0755)
-%doc README AUTHORS ChangeLog LICENSE 
-#%doc doc/text/developer-manual.txt doc/text/user-manual.txt doc/text/faq.txt
-%doc doc/webserver/developer-manual
-%doc doc/webserver/user-manual
-%doc doc/webserver/faq
-%doc doc/webserver/p_doc.css doc/webserver/privoxy-index.html
-%doc doc/webserver/images
-%doc doc/webserver/man-page
-
-# ATTENTION FOR defattr change here !
-%defattr(0644,%{name},%{name},0755)
-
-%dir %{privoxyconf}
-%dir %{privoxyconf}/templates
-%dir %{_localstatedir}/log/%{name}
-
-%attr(0744,%{name},%{name})%{_sbindir}/%{name}
-
-# WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING !
-# We should not use wildchars here. This could mask missing files problems
-# -- morcego
-# WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING ! WARNING !
-%config(noreplace) %{privoxyconf}/config
-%config(noreplace) %{privoxyconf}/user.action
-%config %{privoxyconf}/match-all.action
-%config %{privoxyconf}/default.action
-%config %{privoxyconf}/default.filter
-%config %{privoxyconf}/regression-tests.action
-%config(noreplace) %{privoxyconf}/user.filter
-%config(noreplace) %{privoxyconf}/trust
-
-# Please keep these alphabetized so its easier to find one that 
-# is not included.
-%config %{privoxyconf}/templates/blocked
-%config %{privoxyconf}/templates/cgi-error-404
-%config %{privoxyconf}/templates/cgi-error-bad-param
-%config %{privoxyconf}/templates/cgi-error-disabled
-%config %{privoxyconf}/templates/cgi-error-file
-%config %{privoxyconf}/templates/cgi-error-file-read-only
-%config %{privoxyconf}/templates/cgi-error-modified
-%config %{privoxyconf}/templates/cgi-error-parse
-%config %{privoxyconf}/templates/cgi-style.css
-%config %{privoxyconf}/templates/connect-failed
-%config %{privoxyconf}/templates/default
-%config %{privoxyconf}/templates/forwarding-failed
-%config %{privoxyconf}/templates/edit-actions-add-url-form
-%config %{privoxyconf}/templates/edit-actions-for-url
-%config %{privoxyconf}/templates/edit-actions-for-url-filter
-%config %{privoxyconf}/templates/edit-actions-list
-%config %{privoxyconf}/templates/edit-actions-list-button
-%config %{privoxyconf}/templates/edit-actions-list-section
-%config %{privoxyconf}/templates/edit-actions-list-url
-%config %{privoxyconf}/templates/edit-actions-remove-url-form
-%config %{privoxyconf}/templates/edit-actions-url-form
-%config %{privoxyconf}/templates/mod-local-help
-%config %{privoxyconf}/templates/mod-support-and-service
-%config %{privoxyconf}/templates/mod-title
-%config %{privoxyconf}/templates/mod-unstable-warning
-%config %{privoxyconf}/templates/no-such-domain
-%config %{privoxyconf}/templates/show-request
-%config %{privoxyconf}/templates/show-status
-%config %{privoxyconf}/templates/show-status-file
-%config %{privoxyconf}/templates/show-url-info
-%config %{privoxyconf}/templates/show-version
-%config %{privoxyconf}/templates/toggle
-%config %{privoxyconf}/templates/toggle-mini
-%config %{privoxyconf}/templates/untrusted
-%config %{privoxyconf}/templates/url-info-osd.xml
-
-# Attention, new defattr change here !
-%defattr(0644,root,root,0755)
-
-%config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
-%config(noreplace) %attr(0755,root,root) %{_sysconfdir}/rc.d/init.d/%{name}
-
-%{_mandir}/man1/%{name}.*
-
-%changelog
-* Sat Jun 18 2008 Hal Burgiss <hal@xxxxxxxxxx>
-- Remove reference to txt docs.
-
-* Sat Oct 18 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version to 3.0.6
-
-* Sat Sep 23 2006 Jochen Schlick <j.schlick_at_decagon_de> 3.0.5-1
-- let user-manual point to local documentation
-
-* Thu Sep 21 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Fix user.filter install section and clean up CVS cruft in tarball.
-
-* Wed Sep 20 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version to 3.0.5
-
-* Fri Sep 08 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version to 3.0.4
-
-* Sat Sep 02 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Include new file, user.filter. Do not overwrite "trust" file 
-  (does anyone use this?).
-
-* Wed Mar 26 2003 Andreas Oesterhelt <andreas@xxxxxxxxxxxxxx>
-- Bump version for 3.0.2.
-
-* Wed Mar 19 2003 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version for 3.0.1.
-
-* Tue Aug 25 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version for 3.0.0 :)
-
-* Tue Aug 06 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Reset version for 2.9.20.
-
-* Tue Jul 30 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Reset version for 2.9.18.
-
-* Sat Jul 27 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Reset version and release for 2.9.16.
-
-* Fri Jul 12 2002 Karsten Hopp <karsten@xxxxxxxxx>
-- don't use ghost files for rcX.d/*, using chkconfig is the 
-  correct way to do this job (#68619)
-
-* Fri Jul 05 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.15-8
-- Changing delete order for groups and users (users should be first)
-
-* Wed Jul 03 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.15-7
-- Changing sed expression that removed CR from the end of the lines. This
-  new one removes any control caracter, and should work with older versions
-  of sed
-
-* Tue Jul 02 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.15-6
-- Fixing defattr values. File and directory modes where swapped
-
-* Tue Jul 02 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.15-5
-- Bumping Release number (which should be changed every time the specfile
-  is)
-
-* Tue Jul 02 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-4
-- Fix typo in templates creation.
-
-* Wed Jun 26 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.15-4
-- Fixing issues created by specfile sync between branches
-  - Correcting the release number (WARNING)
-  - Reintroducing text file conversion (dos -> unix)
-  - Reconverting hardcoded directories to macros
-  - Refixing ownership of privoxy files (now using multiple defattr
-    definitions)
-
-* Thu Jun 20 2002 Karsten Hopp <karsten@xxxxxxxxx>
-- fix several .spec file issues to shut up rpmlint
-  - non-standard-dir-perm /var/log/privoxy 0744
-  - invalid-vendor Privoxy.Org (This is ok for binaries compiled by privoxy
-    members, but not for packages from Red Hat)
-  - non-standard-group Networking/Utilities
-  - logrotate and init scripts should be noreplace
-
-* Mon May 27 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Index.html is now privoxy-index.html for doc usage.
-
-* Sat May 25 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Add html man page so index.html does not 404.
-
-* Fri May 24 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Add another template and alphabetize these for easier tracking.
-- Add doc/images directory.
-
-* Wed May 15 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Add templates/edit-actions-list-button
-
-* Fri May 03 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Version bump
-- Adding noreplace for %%{privoxyconf}/config
-- Included a method to verify if the versions declared on the specfile and
-  configure.in match. Interrupt the build if they don't.
-
-* Fri Apr 26 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.14-3
-- Changing Vendor to Privoxy.Org
-
-* Tue Apr 23 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.14-2
-- Adjust for new *actions files.
-
-* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.14-2
-- Removed the redhat hack that prevented the user and group from
-  being dealocated. That was a misundestanding of my part regarding
-  redhat policy.
-
-* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.14-2
-- Using macros to define uid and gid values
-- Bumping release
-
-* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.14-1
-- Changes to fixate the uid and gid values as (both) 73. This is a 
-  value we hope to standarize for all distributions. RedHat already
-  uses it, and Conectiva should start as soon as I find where the heck
-  I left my cluebat :-)
-- Only remove the user and group on uninstall if this is not redhat, once
-  redhat likes to have the values allocated even if the package is not 
-  installed
-
-* Tue Apr 16 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-6
-- Add --disable-dynamic-pcre to configure.
-
-* Wed Apr 10 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.13-5
-- Relisting template files on the %%files section
-
-* Tue Apr 09 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-4
-- Removed 'make dok'. Docs are all maintained in CVS (and tarball) now.
-
-* Mon Apr 08 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-4
-- Add templates/cgi-style.css, faq.txt, p_web.css, LICENSE
-- Remove templates/blocked-compact.
-- Add more docbook stuff to Builderquires.
-
-* Thu Mar 28 2002 Sarantis Paskalis <sarantis@xxxxxxxxxxxxx>
-+ privoxy-2.9.13-3
-- Include correct documentation file.
-
-* Tue Mar 26 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-3
-- Fix typo in Description.
-
-* Tue Mar 26 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.13-3
-- Added commentary asking to update the release value on the configure
-  script
-
-* Tue Mar 25 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-3
-- Added the missing edit-actions-for-url-filter to templates.
-
-* Mon Mar 25 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-2.9.13-2
-- Fixing Release number
-
-* Sun Mar 24 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-2
-- Added faq to docs.
-
-* Sun Mar 24 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxx>
-+ privoxy-2.9.13-2
-- Fixed the init files entries. Now we use %%ghost
-- improved username (and groupname) handling on the %%pre section. By improved
-  I mean: we do it by brute force now. Much easier to maintain. Yeah, you
-  got it right. No more Mr. Nice Guy.
-- Removed the userdel call on %%post. No need, once it's complety handled on
-  the %%pre section
-
-* Sun Mar 24 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ junkbusterng-2.9.13-1
-  Added autoheader. Added autoconf to buildrequires.
-
-* Sun Mar 24 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ junkbusterng-2.9.13-1
-- Fixed build problems re: name conflicts with man page and logrotate.
-- Commented out rc?d/* configs for time being, which are causing a build 
-- failure. /etc/junkbuster is now /etc/privoxy. Stefan did other name 
-- changes. Fixed typo ';' should be ':' causing 'rpm -e' to fail.
-
-* Fri Mar 22 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbusterng-2.9.13-1
-- References to the expression ijb where changed where possible
-- New package name: junkbusterng (all in lower case, acording to
-  the LSB recomendation)
-- Version changed to: 2.9.13
-- Release: 1
-- Added: junkbuster to obsoletes and conflicts (Not sure this is
-  right. If it obsoletes, why conflict ? Have to check it later)
-- Summary changed: Stefan, please check and aprove it
-- Changes description to use the new name
-- Sed string was NOT changed. Have to wait to the manpage to
-  change first
-- Keeping the user junkbuster for now. It will require some aditional
-  changes on the script (scheduled for the next specfile release)
-- Added post entry to move the old logfile to the new log directory
-- Removing "chkconfig --add" entry (not good to have it automaticaly
-  added to the startup list).
-- Added preun section to stop the service with the old name, as well
-  as remove it from the startup list
-- Removed the chkconfig --del entry from the conditional block on
-  the preun scriptlet (now handled on the %files section)
-
-* Thu Mar 21 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- added ijb_docs.css to docs.
-
-* Mon Mar 11 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ junkbuster-2.9.11-8 
-- Take out --enable-no-gifs, breaks some browsers.
-
-* Sun Mar 10 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ junkbuster-2.9.11-8 
-- Add --enable-no-gifs to configure.
-
-* Fri Mar 08 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbuster-2.9.11-7
-- Added BuildRequires to libtool.
-
-* Tue Mar 06 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbuster-2.9.11-6
-- Changed the routined that handle the junkbust and junkbuster users on
-  %%pre and %%post to work in a smoother manner
-- %%files now uses hardcoded usernames, to avoid problems with package
-  name changes in the future
-
-* Tue Mar 05 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbuster-2.9.11-5
-- Added "make redhat-dok" to the build process
-- Added docbook-utils to BuildRequires
-
-* Tue Mar 05 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbuster-2.9.11-4
-- Changing man section in the manpage from 1 to 8
-- We now require packages, not files, to avoid issues with apt
-
-* Mon Mar 04 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbuster-2.9.11-3
-- Fixing permissions of the init script
-
-* Mon Mar 04 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ junkbuster-2.9.11-2
-- General specfile fixup, using the best recomended practices, including:
-	- Adding -q to %%setup
-	- Using macros whereever possible
-	- Not using wildchars on %%files section
-	- Doubling the percentage char on changelog and comments, to
-	  avoid rpm expanding them
-
-* Sun Mar 03 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- /bin/false for shell causes init script to fail. Reverting.
-
-* Wed Jan 09 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Removed UID 73. Included user-manual and developer-manual in docs.
-  Include other actions files. Default shell is now /bin/false.
-  Userdel user=junkbust. ChangeLog was not zipped. Removed 
-  RPM_OPT_FLAGS kludge.
-
-* Fri Dec 28 2001 Thomas Steudten <thomas@xxxxxxxxxxx>
-- add paranoia check for 'rm -rf %%{buildroot}'
-- add gzip to 'BuildRequires'
-
-* Sat Dec  1 2001 Hal Burgiss <hal@xxxxxxxxxx>
-- actionsfile is now ijb.action.
-
-* Tue Nov  6 2001 Thomas Steudten <thomas@xxxxxxxxxxx>
-- Compress manpage
-- Add more documents for installation
-- Add version string to name and source
-
-* Wed Oct 24 2001 Hal Burigss <hal@xxxxxxxxxx>
-- Back to user 'junkbuster' and fix configure macro.
-
-* Wed Oct 10 2001 Hal Burigss <hal@xxxxxxxxxx>
-- More changes for user 'junkbust'. Init script had 'junkbuster'.
-
-* Sun Sep 23 2001 Hal Burgiss <hal@xxxxxxxxxx>
-- Change of $RPM_OPT_FLAGS handling. Added new HTML doc files.
-- Changed owner of /etc/junkbuster to shut up PAM/xauth log noise.
-
-* Thu Sep 13 2001 Hal Burgiss <hal@xxxxxxxxxx>
-- Added $RPM_OPT_FLAGS support, renaming of old logfile, and 
-- made sure no default shell exists for user junkbust.
-
-* Sun Jun  3 2001 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-- rework of RPM
-
-* Mon Sep 25 2000 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-- CLF Logging patch by davep@xxxxxxxxxxxxxxx
-- Hal DeVore <haldevore@xxxxxxxxxxxxx> fix akamaitech in blocklist
-
-* Sun Sep 17 2000 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-- Steve Kemp skx@xxxxxxxxxxxxxxx's javascript popup patch.
-- Markus Breitenbach breitenb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx supplied
-  numerous fixes and enhancements for Steve's patch.
-- adamlock@xxxxxxxxxxxx (Adam Lock) in the windows version:
-  - Taskbar activity spinner always spins even when logging is
-  turned off (which is the default) - people who don't
-  like the spinner can turn it off from a menu option.
-  - Taskbar popup menu has a options submenu - people can now
-  open the settings files for cookies, blockers etc.
-  without opening the JB window.
-  - Logging functionality works again
-  - Buffer overflow is fixed - new code uses a bigger buffer
-  and snprintf so it shouldn't overflow anymore.
-- Fixed userid swa, group learning problem while installing.
-  root must build RPM.
-- Added patch by Benjamin Low <ben@xxxxxxxxxxxxxxx> that prevents JB to
-  core dump when there is no log file.
-- Tweaked SuSE startup with the help of mohataj@xxxxxxx and Doc.B@xxxxxxx
-- Fixed man page to include imagefile and popupfile.
-- Sanity check for the statistics function added.
-- "Patrick D'Cruze" <pdcruze@xxxxxxxxxxxxxxxxx>: It seems Microsoft
- are transitioning Hotmail from FreeBSD/Apache to Windows 2000/IIS.
- With IIS/5, it appears to omit the trailing \r\n from http header
- only messages.  eg, when I visit http://www.hotmail.com, IIS/5
- responds with a HTTP 302 redirect header.  However, this header
- message is missing the trailing \r\n.  IIS/5 then closes the
- connection.  Junkbuster, unfortunately, discards the header becomes
- it thinks it is incomplete - and it is.  MS have transmitted an
- incomplete header!
-- Added bug reports and patch submission forms in the docs.
-
-* Mon Mar 20 2000 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-       Andrew <anw@xxxxxxxxxxxxxxxxxxxxx> extended the JB:
-       Display of statistics of the total number of requests and the number
-       of requests filtered by junkbuster, also the percentage of requests
-       filtered. Suppression of the listing of files on the proxy-args page.
-       All stuff optional and configurable.
-
-* Sun Sep 12 1999 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-       Jan Willamowius (jan@xxxxxxxxxxxxxxx) fixed a bug in the 
-       code which prevented the JB from handling URLs of the form
-       user:password@xxxxxxxxxxxx Fixed.
-
-* Mon Aug  2 1999 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-	Blank images are no longer cached, thanks to a hint from Markus 
-        Breitenbach <breitenb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>. The user 
-        agent is NO longer set by the Junkbuster. Sadly, many sites depend 
-        on the correct browser version nowadays. Incorporated many 
-	suggestions from Jan "Yenya" Kasprzak <kas@xxxxxxxxxx> for the
-        spec file. Fixed logging problem and since runlevel 2 does not 
-        use networking, I replaced /etc/rc.d/rc2.d/S84junkbuster with
-        /etc/rc.d/rc2.d/K09junkbuster thanks to Shaw Walker 
-        <walker@xxxxxxxxxxx>. You should now be able to build this RPM as 
-        a non-root user (mathias@xxxxxxxxxxxxxxxxxxxxx).
-
-* Sun Jan 31 1999 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-	%%{_localstatedir}/log/junkbuster set to nobody. Added /etc/junkbuster/imagelist
-	to allow more sophisticated matching of blocked images. Logrotate
-	logfile. Added files for auto-updating the blocklist et al.
-
-* Wed Dec 16 1998 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-	Configure blank version via config file. No separate blank
-	version anymore. Added Roland's <roland@xxxxxxxxxxxxxxxxxx>
-	patch to show a logo instead of a blank area. Added a suggestion
-	from Alex <alex@xxxxxxxxxxxxxxxxx>: %%{_localstatedir}/lock/subsys/junkbuster.
-	More regexps in the blocklist. Prepared the forwardfile for
-	squid. Extended image regexp with help from gabriel 
-	<somlo@xxxxxxxxxxxxxxxx>.
-
-* Thu Nov 19 1998 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-	All RPMs now identify themselves in the show-proxy-args page.
-	Released Windoze version. Run junkbuster as nobody instead of
-	root. 
-
-* Fri Oct 30 1998 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-	Newest version. First release (hence the little version number
-	mixture -- 2.0.2-0 instead of 2.0-7). This version tightens 
-	security over 2.0.1; some multi-user sites will need to change 
-	the listen-address in the configuration file. The blank version of
-        the Internet Junkbuster has a more sophisticated way of replacing
-	images. All RPMs identify themselves in the show-proxy-args page.
-
-* Thu Sep 23 1998 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-	Modified the blocking feature, so that only GIFs and JPEGs are
-	blocked and replaced but not HTML pages. Thanks to 
-	"Gerd Flender" <plgerd@xxxxxxxxxxxxxxxxxxxxxxxx> for this nice
-	idea. Added numerous stuff to the blocklist. Keep patches in
-        seperate files and no longer in diffs (easier to maintain).
-
-* Tue Jun 16 1998 Stefan Waldherr <swa@xxxxxxxxxx>
-        Moved config files to /etc/junkbuster directory, moved man page,
-	added BuildRoot directive (Thanks to Alexey Nogin <ayn2@xxxxxxxxxxx>)
-        Made new version junkbuster-raw (which is only a stripped version of 
-        the junkuster rpm, i.e. without my blocklist, etc.)
-
-* Tue Jun 16 1998 (2.0-1)
-	Uhm, not that much. Just a new junkbuster version that
-	fixes a couple of bugs ... and of course a bigger 
-	blocklist with the unique Now-less-ads-than-ever(SM)
-	feature.
-	Oh, one thing: I changed the default user agent to Linux -- no 
-	need anymore to support Apple.
-
-* Tue Jun 16 1998 (2.0-0)
-	Now-less-ads-than-ever (SM)
-	compiled with gcc instead of cc
-	compiled with -O3, thus it should be a little faster
-	show-proxy-args now works
-	/etc/junkbuster.init wasn't necessary
-
-* Tue Jun 16 1998 (1.4)
-	some more config files were put into /etc
-	The junkbuster-blank rpm returns a 1x1 pixel image, that gets 
-	displayed by Netscape instead of the blocked image.
-	Read http://www.waldherr.org/junkbuster/ for
-	further info.
-
-* Tue Jun 16 1998 (1.3)
-	The program has been moved to /usr/sbin (from /usr/local/bin)
-	Init- and stopscripts (/etc/rc.d/rc*) have been added so
-	that the junkbuster starts automatically during bootup.
-	The /etc/blocklist file is much more sophisticated. Theoretically
-	one should e.g. browse all major US and German newspapers without
-	seeing one annoying ad.
-	junkbuster.init was modified. It now starts junkbuster with an
-	additional "-r @" flag.
-
-# $Log: privoxy-rh.spec,v $
-# Revision 1.63  2009/03/21 10:46:15  fabiankeil
-# Bump version to 3.0.12.
-#
-# Revision 1.62  2009/02/15 17:17:23  fabiankeil
-# - Bump version to 3.0.11.
-# - List match-all.action as %config file.
-#
-# Revision 1.61  2009/01/13 16:47:34  fabiankeil
-# The standard.action file is gone.
-#
-# Revision 1.60  2008/08/30 12:46:49  fabiankeil
-# The jarfile directive is gone. Update accordingly.
-#
-# Revision 1.59  2008/08/13 16:57:46  fabiankeil
-# Change version to 3.0.10.
-#
-# Revision 1.58  2008/06/19 01:52:17  hal9
-# Remove txt docs from spec file.
-#
-# Revision 1.57  2008/05/30 15:06:42  fabiankeil
-# - Add %config directive for url-info-osd.xml.
-#   As usual, this hasn't been tested.
-# - Fix comment typo.
-#
-# Revision 1.56  2008/03/16 14:17:25  fabiankeil
-# Add %config lines for regression-tests.action and forwarding-failed.
-# This might or might not help with #1915185, reported by Bernardo Bacic.
-#
-# Revision 1.55  2008/03/02 17:36:43  fabiankeil
-# Set version to 3.0.9.
-#
-# Revision 1.54  2008/01/20 14:30:59  fabiankeil
-# Set version to 3.0.8.
-#
-# Revision 1.53  2006/11/28 11:34:35  hal9
-# Fix the prep section per Support request so it actually builds.
-#
-# Revision 1.52  2006/11/18 17:36:53  hal9
-# Ooops, bumping version to 3.0.6
-#
-# Revision 1.51  2006/11/18 14:37:12  fabiankeil
-# Bump version to 3.0.6.
-#
-# Revision 1.50  2006/09/24 01:19:03  hal9
-# Add changes for user-manual directive by nfopd submitted via SF.
-#
-# Revision 1.49  2006/09/22 01:02:08  hal9
-# Fix user.filter installation and CVS files cruft per support request.
-#
-# Revision 1.48  2006/09/20 23:51:26  hal9
-# Bump versions to 3.0.5
-#
-# Revision 1.47  2006/09/09 00:35:10  hal9
-# Bumped versions to 3.0.4. Both files should be checked further.
-#
-# Revision 1.46  2006/09/02 22:22:59  hal9
-# Include user.filter, and do not overwrite trust file on updates.
-#
-# Revision 1.45  2006/07/18 14:48:47  david__schmidt
-# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-# with what was really the latest development (the v_3_0_branch branch)
-#
-# Revision 1.33.2.22  2004/01/30 17:09:29  oes
-# Bumped version for 3.0.3
-#
-# Revision 1.33.2.21  2003/03/26 00:25:00  oes
-# Bump version for 3.0.2
-#
-# Revision 1.33.2.20  2003/03/20 03:27:11  hal9
-# Bump version for 3.0.1 pending release.
-#
-# Revision 1.33.2.19  2002/08/25 23:36:03  hal9
-# Bump version for 3.0.0.
-#
-# Revision 1.33.2.18  2002/08/10 11:28:50  oes
-# Bumped version
-#
-# Revision 1.33.2.17  2002/08/07 01:08:49  hal9
-# Bumped version to 2.9.18.
-#
-# Revision 1.33.2.16  2002/08/05 08:42:13  kick_
-# same permissions, same runlevels as all the other initscripts
-#
-# Revision 1.33.2.15  2002/07/30 21:51:19  hal9
-# Bump version to 2.9.17.
-#
-# Revision 1.33.2.14  2002/07/27 21:58:16  kick_
-# bump version
-#
-# Revision 1.33.2.13  2002/07/27 21:39:41  kick_
-# condrestart raised an error during an fresh install when privoxy wasn't already running
-#
-# Revision 1.33.2.12  2002/07/27 15:47:10  hal9
-# Reset version and release for 2.9.16.
-#
-# Revision 1.33.2.11  2002/07/25 09:47:57  kick_
-# this caused some errors during a fresh installation. It's unnecessary to call an extra program (/bin/true) to set the error code to 0
-#
-# Revision 1.33.2.10  2002/07/12 09:14:26  kick_
-# don't use ghost files for rcX.d/*, chkconfig is available to do this job. Enable translation of error messge
-#
-# Revision 1.33.2.9  2002/07/05 17:16:19  morcego
-# - Changing delete order for groups and users (users should be first)
-#
-# Revision 1.33.2.8  2002/07/03 20:46:24  morcego
-# - Changing sed expression that removed CR from the end of the lines. This
-#   new one removes any control caracter, and should work with older versions
-#   of sed
-#
-# Revision 1.33.2.7  2002/07/02 18:16:48  morcego
-# - Fixing defattr values. File and directory modes where swapped
-#
-# Revision 1.33.2.6  2002/07/02 17:38:10  morcego
-# Bumping Release number
-#
-# Revision 1.33.2.5  2002/07/02 11:43:20  hal9
-# Fix typo in templates creation.
-#
-# Revision 1.33.2.4  2002/06/26 17:32:45  morcego
-# Integrating fixed from the main branch.
-#
-# Revision 1.33.2.3  2002/06/24 12:13:34  kick_
-# shut up rpmlint. btw: The vendor tag should be set in you .rpmmacros file, not in the spec file!
-#
-# Revision 1.33.2.2  2002/05/28 02:39:38  hal9
-# Replace index.html with privoxy-index.html for docs.
-#
-# Revision 1.33.2.1  2002/05/26 17:20:23  hal9
-# Add images to doc dirs.
-#
-# Revision 1.33  2002/05/25 02:08:23  hal9
-# Add doc/images directory.
-# Redhat: alphabetized list of templates (and I think added one in the process)
-#
-# Revision 1.32  2002/05/16 01:37:29  hal9
-# Add new template file so CGI stuff works :)
-#
-# Revision 1.31  2002/05/03 17:14:35  morcego
-# *.spec: Version bump to 2.9.15
-# -rh.spec: noreplace for %%{privoxyconf}/config
-#           Will interrupt the build if versions from configure.in and
-# 		specfile do not match
-#
-# Revision 1.30  2002/04/26 15:51:05  morcego
-# Changing Vendor value to Privoxy.Org
-#
-# Revision 1.29  2002/04/24 03:13:51  hal9
-# New actions files changes.
-#
-# Revision 1.28  2002/04/22 18:51:33  morcego
-# user and group now get removed on rh too.
-#
-# Revision 1.27  2002/04/22 16:32:31  morcego
-# configure.in, *.spec: Bumping release to 2 (2.9.14-2)
-# -rh.spec: uid and gid are now macros
-# -suse.spec: Changing the header Copyright to License (Copyright is
-#             deprecable)
-#
-# Revision 1.26  2002/04/22 16:24:36  morcego
-# - Changes to fixate the uid and gid values as (both) 73. This is a
-#   value we hope to standarize for all distributions. RedHat already
-#   uses it, and Conectiva should start as soon as I find where the heck
-#   I left my cluebat :-)
-# - Only remove the user and group on uninstall if this is not redhat, once
-#   redhat likes to have the values allocated even if the package is not
-#   installed
-#
-# Revision 1.25  2002/04/17 01:59:12  hal9
-# Add --disable-dynamic-pcre.
-#
-# Revision 1.24  2002/04/11 10:09:20  oes
-# Version 2.9.14
-#
-# Revision 1.23  2002/04/10 18:14:45  morcego
-# - (privoxy-rh.spec only) Relisting template files on the %%files section
-# - (configure.in, privoxy-rh.spec) Bumped package release to 5
-#
-# Revision 1.22  2002/04/09 22:06:12  hal9
-# Remove 'make dok'.
-#
-# Revision 1.21  2002/04/09 02:52:26  hal9
-# - Add templates/cgi-style.css, faq.txt, p_web.css, LICENSE
-# - Remove templates/blocked-compact.
-# - Add more docbook stuff to Buildrequires.
-#
-# Revision 1.20  2002/04/08 20:27:45  swa
-# fixed JB spelling
-#
-# Revision 1.19  2002/03/27 22:44:59  sarantis
-# Include correct documentation file.
-#
-# Revision 1.18  2002/03/27 22:10:14  sarantis
-# bumped Hal's last commit 1 day to the future to make rpm build again.
-#
-# Revision 1.17  2002/03/27 00:48:23  hal9
-# Fix up descrition.
-#
-# Revision 1.16  2002/03/26 22:29:55  swa
-# we have a new homepage!
-#
-# Revision 1.15  2002/03/26 17:39:54  morcego
-# Adding comment on the specfile to remember the packager to update
-# the release number on the configure script
-#
-# Revision 1.14  2002/03/26 14:25:15  hal9
-# Added edit-actions-for-url-filter to templates in %%config
-#
-# Revision 1.13  2002/03/25 13:31:04  morcego
-# Bumping Release tag.
-#
-# Revision 1.12  2002/03/25 03:11:40  hal9
-# Do it right way this time :/
-#
-# Revision 1.11  2002/03/25 03:09:51  hal9
-# Added faq to docs.
-#
-# Revision 1.10  2002/03/24 22:16:14  morcego
-# Just removing some old commentaries.
-#
-# Revision 1.9  2002/03/24 22:03:22  morcego
-# Should be working now. See %changelog for details
-#
-# Revision 1.8  2002/03/24 21:13:01  morcego
-# Tis broken.
-#
-# Revision 1.7  2002/03/24 21:07:18  hal9
-# Add autoheader, etc.
-#
-# Revision 1.6  2002/03/24 19:56:40  hal9
-# /etc/junkbuster is now /etc/privoxy. Fixed ';' typo.
-#
-# Revision 1.4  2002/03/24 13:32:42  swa
-# name change related issues
-#
-# Revision 1.3  2002/03/24 12:56:21  swa
-# name change related issues.
-#
-# Revision 1.2  2002/03/24 11:40:14  swa
-# name change
-#
-# Revision 1.1  2002/03/24 11:23:44  swa
-# name change
-#
-# Revision 1.1  2002/03/22 20:53:03  morcego
-# - Ongoing process to change name to JunkbusterNG
-# - configure/configure.in: no change needed
-# - GNUmakefile.in:
-#         - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
-#         - PROGRAM    = jbng@EXEEXT@
-#         - rh-spec now references as junkbusterng-rh.spec
-#         - redhat-upload: references changed to junkbusterng-* (package names)
-#         - tarball-dist: references changed to JunkbusterNG-distribution-*
-#         - tarball-src: now JunkbusterNG-*
-#         - install: initscript now junkbusterng.init and junkbusterng (when
-#                    installed)
-# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
-# - junkbusterng.spec:
-#         - References to the expression ijb where changed where possible
-#         - New package name: junkbusterng (all in lower case, acording to
-#           the LSB recomendation)
-#         - Version changed to: 2.9.13
-#         - Release: 1
-#         - Added: junkbuster to obsoletes and conflicts (Not sure this is
-#           right. If it obsoletes, why conflict ? Have to check it later)
-#         - Summary changed: Stefan, please check and aprove it
-#         - Changes description to use the new name
-#         - Sed string was NOT changed. Have to wait to the manpage to
-#           change first
-#         - Keeping the user junkbuster for now. It will require some aditional
-#           changes on the script (scheduled for the next specfile release)
-#         - Added post entry to move the old logfile to the new log directory
-#         - Removing "chkconfig --add" entry (not good to have it automaticaly
-#           added to the startup list).
-#         - Added preun section to stop the service with the old name, as well
-#           as remove it from the startup list
-#         - Removed the chkconfig --del entry from the conditional block on
-#           the preun scriptlet (now handled on the %files section)
-# - junkbuster.init: renamed to junkbusterng.init
-# - junkbusterng.init:
-#         - Changed JB_BIN to jbng
-#         - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
-#           be used where necessary (config dir)
-#
-# Aditional notes:
-# - The config directory is /etc/junkbuster yet. Have to change it on the
-# specfile, after it is changes on the code
-# - The only files that got renamed on the cvs tree were the rh specfile and
-# the init file. Some file references got changes on the makefile and on the
-# rh-spec (as listed above)
-#
-# Revision 1.43  2002/03/21 16:04:10  hal9
-# added ijb_docs.css to %doc
-#
-# Revision 1.42  2002/03/12 13:41:18  sarantis
-# remove hard-coded "ijbswa" string in build phase
-#
-# Revision 1.41  2002/03/11 22:58:32  hal9
-# Remove --enable-no-gifs
-#
-# Revision 1.39  2002/03/08 18:57:29  swa
-# remove user junkbuster after de-installation.
-#
-# Revision 1.38  2002/03/08 13:45:27  morcego
-# Adding libtool to Buildrequires
-#
-# Revision 1.37  2002/03/07 19:23:49  swa
-# i hate to scroll. suse: wrong configdir.
-#
-# Revision 1.36  2002/03/07 05:06:54  morcego
-# Fixed %pre scriptlet. And, as a bonus, you can even understand it now. :-)
-#
-# Revision 1.34  2002/03/07 00:11:57  morcego
-# Few changes on the %pre and %post sections of the rh specfile to handle
-# usernames more cleanly
-#
-# Revision 1.33  2002/03/05 13:13:57  morcego
-# - Added "make redhat-dok" to the build phase
-# - Added docbook-utils to BuildRequires
-#
-# Revision 1.32  2002/03/05 12:34:24  morcego
-# - Changing section internaly on the manpage from 1 to 8
-# - We now require packages, not files, to avoid issues with apt
-#
-# Revision 1.31  2002/03/04 18:06:09  morcego
-# SPECFILE: fixing permissing of the init script (broken by the last change)
-#
-# Revision 1.30  2002/03/04 16:18:03  morcego
-# General cleanup of the rh specfile.
-#
-# %changelog
-# * Mon Mar 04 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-# + junkbuster-2.9.11-2
-# - General specfile fixup, using the best recomended practices, including:
-#         - Adding -q to %%setup
-#         - Using macros whereever possible
-#         - Not using wildchars on %%files section
-#         - Doubling the percentage char on changelog and comments, to
-#           avoid rpm expanding them
-#
-# Revision 1.29  2002/03/03 19:21:22  hal9
-# Init script fails if shell is /bin/false.
-#
-# Revision 1.28  2002/01/09 18:34:03  hal9
-# nit.
-#
-# Revision 1.27  2002/01/09 18:32:02  hal9
-# Removed RPM_OPT_FLAGS kludge.
-#
-# Revision 1.26  2002/01/09 18:21:10  hal9
-# A few minor updates.
-#
-# Revision 1.25  2001/12/28 01:45:36  steudten
-# Add paranoia check and BuildReq: gzip
-#
-# Revision 1.24  2001/12/01 21:43:14  hal9
-# Allowed for new ijb.action file.
-#
-# Revision 1.23  2001/11/06 12:09:03  steudten
-# Compress doc files. Install README and AUTHORS at last as document.
-#
-# Revision 1.22  2001/11/05 21:37:34  steudten
-# Fix to include the actual version for name.
-# Let the 'real' packager be included - sorry stefan.
-#
-# Revision 1.21  2001/10/31 19:27:27  swa
-# consistent description. new name for suse since
-# we had troubles with rpms of identical names
-# on the webserver.
-#
-# Revision 1.20  2001/10/24 15:45:49  hal9
-# To keep Thomas happy (aka correcting my  mistakes)
-#
-# Revision 1.19  2001/10/15 03:23:59  hal9
-# Nits.
-#
-# Revision 1.17  2001/10/10 18:59:28  hal9
-# Minor change for init script.
-#
-# Revision 1.16  2001/09/24 20:56:23  hal9
-# Minor changes.
-#
-# Revision 1.13  2001/09/10 17:44:43  swa
-# integrate three pieces of documentation. needs work.
-# will not build cleanly under redhat.
-#
-# Revision 1.12  2001/09/10 16:25:04  swa
-# copy all templates. version updated.
-#
-# Revision 1.11  2001/07/03 11:00:25  sarantis
-# replaced permissionsfile with actionsfile
-#
-# Revision 1.10  2001/07/03 09:34:44  sarantis
-# bumped up version number.
-#
-# Revision 1.9  2001/06/12 18:15:29  swa
-# the %% in front of configure (see tag below) confused
-# the rpm build process on 7.1.
-#
-# Revision 1.8  2001/06/12 17:15:56  swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %% configure confuses rpm, etc.
-#
-# Revision 1.7  2001/06/11 12:17:26  sarantis
-# fix typo in %%post
-#
-# Revision 1.6  2001/06/11 11:28:25  sarantis
-# Further optimizations and adaptations in the spec file.
-#
-# Revision 1.5  2001/06/09 09:14:11  swa
-# shamelessly adapted RPM stuff from the newest rpm that
-# RedHat provided for the JB.
-#
-# Revision 1.4  2001/06/08 20:54:18  swa
-# type with status file. remove forward et. al from file list.
-#
-# Revision 1.3  2001/06/07 17:28:10  swa
-# cosmetics
-#
-# Revision 1.2  2001/06/04 18:31:58  swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
-#
-# Revision 1.1  2001/06/04 10:44:57  swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
-#
-#
-#
diff --git a/external/privoxy/privoxy-suse.spec b/external/privoxy/privoxy-suse.spec
deleted file mode 100644
index fc39938..0000000
--- a/external/privoxy/privoxy-suse.spec
+++ /dev/null
@@ -1,556 +0,0 @@
-# $Id: privoxy-suse.spec,v 1.33 2009/03/21 10:46:15 fabiankeil Exp $
-#
-# Written by and Copyright (C) 2001-2006 the SourceForge
-# Privoxy team. http://www.privoxy.org/
-#
-# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and 
-# Junkbusters Corporation.  http://www.junkbusters.com
-#
-# This program is free software; you can redistribute it 
-# and/or modify it under the terms of the GNU General
-# Public License as published by the Free Software
-# Foundation; either version 2 of the License, or (at
-# your option) any later version.
-#
-# This program is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.  See the GNU General Public 
-# License for more details.
-#
-# The GNU General Public License should be included with
-# this file.  If not, you can view it at
-# http://www.gnu.org/copyleft/gpl.html
-# or write to the Free Software Foundation, Inc., 59
-# Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-
-# do not set to %{name}
-%define privoxyconf %{_sysconfdir}/privoxy
-%define privoxy_uid 73
-%define privoxy_gid 73
-
-
-Summary:      Privoxy - privacy enhancing proxy
-Vendor:       Privoxy.Org
-Name:         privoxy-suse
-Distribution: defineme
-Version: 3.0.12
-Release: 1
-# Needs makefile change: Source: http://prdownloads.sourceforge.net/ijbswa/privoxy-%{version}-%{status}-src.tar.gz
-Source: http://prdownloads.sourceforge.net/ijbswa/privoxy-%{version}.tar.gz
-# not sure if this works
-BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Packager:     http://www.privoxy.org/
-License:     GPL
-Group:        Networking/Utilities
-URL:          http://www.privoxy.org/
-Autoreqprov:  on
-BuildRequires: perl gzip libtool autoconf
-Conflicts: junkbuster-raw junkbuster-blank junkbuster-suse junkbuster privoxy
-
-#
-# -----------------------------------------------------------------------------
-#
-%description
-Privoxy is a web proxy with advanced filtering capabilities for
-protecting privacy, modifying web page data, managing cookies,
-controlling access, and removing ads, banners, pop-ups and other
-obnoxious Internet junk. Privoxy has a very flexible configuration and
-can be customized to suit individual needs and tastes. Privoxy has 
-application for both stand-alone systems and multi-user networks.
-
-Privoxy is based on the Internet Junkbuster.
-
-Authors:
---------
-    http://www.privoxy.org/
-
-SuSE series: n
-
-#
-# -----------------------------------------------------------------------------
-#
-%prep
-%setup -c
-
-#
-# -----------------------------------------------------------------------------
-#
-%build
-autoheader
-autoconf
-./configure --disable-dynamic-pcre
-make
-
-
-## Explicitily stripping is not recomended.
-## This is handled altomaticaly by RPM, and can couse troubles if
-## anyone wants to build an unstriped version - morcego
-#strip privoxy
-
-#
-# -----------------------------------------------------------------------------
-#
-%install
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-mkdir -p ${RPM_BUILD_ROOT}%{_sbindir} \
-         ${RPM_BUILD_ROOT}%{_mandir}/man8 \
-         ${RPM_BUILD_ROOT}/var/log/privoxy \
-         ${RPM_BUILD_ROOT}%{privoxyconf}/templates \
-         ${RPM_BUILD_ROOT}%{_sysconfdir}/logrotate.d \
-         ${RPM_BUILD_ROOT}%{_sysconfdir}/init.d
-gzip README AUTHORS ChangeLog privoxy.1 LICENSE || /bin/true
-install -s -m 744 privoxy $RPM_BUILD_ROOT%{_sbindir}/privoxy
-cp -f privoxy.1.gz $RPM_BUILD_ROOT%{_mandir}/man8/privoxy.8.gz
-cp -f *.action $RPM_BUILD_ROOT%{privoxyconf}/
-cp -f default.filter $RPM_BUILD_ROOT%{privoxyconf}/default.filter
-cp -f trust $RPM_BUILD_ROOT%{privoxyconf}/trust
-cp -f templates/*  $RPM_BUILD_ROOT%{privoxyconf}/templates/
-cp -f privoxy.logrotate $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/privoxy
-install -m 755 privoxy.init.suse $RPM_BUILD_ROOT%{_sysconfdir}/init.d/privoxy
-install -m 711 -d $RPM_BUILD_ROOT/var/log/privoxy
-ln -sf /etc/init.d/privoxy $RPM_BUILD_ROOT/usr/sbin/rcprivoxy
-
-# verify all file locations, etc. in the config file
-# don't start with ^ or commented lines are not replaced
-cat config | \
-    sed 's/^confdir.*/confdir \/etc\/privoxy/g' | \
-#    sed 's/^permissionsfile.*/permissionsfile \/etc\/privoxy\/permissionsfile/g' | \
-#    sed 's/^filterfile.*/default.filter \/etc\/privoxy\/default.filter/g' | \
-#    sed 's/^logfile.*/logfile \/var\/log\/privoxy\/logfile/g' | \
-#    sed 's/^forward.*/forward \/etc\/privoxy\/forward/g' | \
-#    sed 's/^aclfile.*/aclfile \/etc\/privoxy\/aclfile/g' > \
-    sed 's/^logdir.*/logdir \/var\/log\/privoxy/g' > \
-    $RPM_BUILD_ROOT%{privoxyconf}/config
-
-#
-# -----------------------------------------------------------------------------
-#
-%pre
-# We check to see if the user privoxy exists.
-# If it does, we do nothing
-# If we don't, we check to see if the user junkbust exist and, in case it
-# does, we change it do privoxy. If it also does not exist, we create the
-# privoxy user -- morcego
-id privoxy > /dev/null 2>&1 
-if [ $? -eq 1 ]; then
-	id junkbust > /dev/null 2>&1 
-	if [ $? -eq 0 ]; then
-		/usr/sbin/usermod -u %{privoxy_uid} -g %{privoxy_gid} -l privoxy -d %{_sysconfdir}/privoxy -s "" junkbust  > /dev/null 2>&1
-	else
-# -r does not work on suse.
-		/usr/sbin/groupadd -g %{privoxy_gid} privoxy
-		/usr/sbin/useradd -u %{privoxy_uid} -d %{_sysconfdir}/privoxy -g privoxy -s "" privoxy > /dev/null 2>&1 
-	fi
-fi
-
-#
-# -----------------------------------------------------------------------------
-#
-%post
-[ -f /var/log/privoxy/privoxy ] &&\
- mv -f /var/log/privoxy/privoxy /var/log/privoxy/logfile || /bin/true
-chown -R privoxy:privoxy /var/log/privoxy 2>/dev/null
-chown -R privoxy:privoxy /etc/privoxy 2>/dev/null
-# not available on suse
-#if [ "$1" = "1" ]; then
-#     /sbin/chkconfig --add privoxy
-#	/sbin/service privoxy condrestart > /dev/null 2>&1
-#fi
-# 01/09/02 HB, getting rid of any user=junkbust
-# Changed by morcego to use the id command.
-id junkbust > /dev/null 2>&1 && /usr/sbin/userdel junkbust || /bin/true
-sbin/insserv etc/init.d/privoxy
-
-#
-# -----------------------------------------------------------------------------
-#
-%preun
-# need to stop the service on suse. swa.
-#if [ "$1" = "0" ]; then
-#	/sbin/service privoxy stop > /dev/null 2>&1 ||:
-#fi
-
-#
-# -----------------------------------------------------------------------------
-#
-%postun
-sbin/insserv etc/init.d/
-# dont forget to remove user and group privoxy
-id privoxy > /dev/null 2>&1 && /usr/sbin/userdel privoxy || /bin/true
-
-#
-# -----------------------------------------------------------------------------
-#
-%clean
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-
-#
-# -----------------------------------------------------------------------------
-#
-%files
-%defattr(-,root,root)
-%doc README.gz AUTHORS.gz ChangeLog.gz LICENSE.gz
-%doc doc/webserver/developer-manual
-%doc doc/webserver/user-manual
-%doc doc/webserver/faq
-%doc doc/webserver/p_doc.css
-%doc doc/webserver/privoxy-index.html
-%doc doc/webserver/images
-%doc doc/webserver/man-page
-
-%dir %{privoxyconf}
-%config %{privoxyconf}/*
-%attr(0740,privoxy,privoxy) %dir /var/log/privoxy
-%config %{_sysconfdir}/logrotate.d/privoxy
-%attr(0755,root,root)/usr/sbin/privoxy
-%{_mandir}/man8/*
-%config %{_sysconfdir}/init.d/privoxy
-/usr/sbin/rcprivoxy
-
-#
-# -----------------------------------------------------------------------------
-#
-%changelog
-* Wed Sep 20 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version for 3.0.5.
-
-* Fri Sep 08 2006 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version for 3.0.4.
-
-* Wed Mar 26 2003 Andreas Oesterhelt <andreas@xxxxxxxxxxxxxx>
-- Bump version for 3.0.2.
-
-* Wed Mar 19 2003 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version for 3.0.1.
-
-* Tue Aug 25 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Bump version for 3.0.0 :) 
-
-* Tue Aug 06 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Reset version for 2.9.18. 
-
-* Wed Jul 30 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Reset version for 2.9.17.
-
-* Sat Jul 27 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Reset version and release for 2.9.16.
-
-* Mon May 27 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Index.html is now privoxy-index.html for doc usage.
-
-* Mon May 27 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Index.html is now privoxy-index.html for doc usage.
-
-* Sat May 25 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Add html man page so index.html does not 404.
-
-* Fri May 24 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.15-1
-- Add doc/images directory.
-
-* Fri May 03 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-suse-2.9.15-1
-- Version bump
-
-* Fri Apr 26 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-suse-2.9.14-3
-- Changing Vendor to Privoxy.Org
-
-* Mon Apr 22 2002 Rodrigo Barbosa <rodrigob@xxxxxxxxxxxxxxxx>
-+ privoxy-suse-2.9.14-2
-- Bumping release to reflect the new value on configure.in
-- Taking the oportunity to change the header Copyright to License. The
-  Copyright headers is deprecated, and after all, GPL is a license, not a
-  Copyright
-
-* Mon Apr 08 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-4
-- Add LICENSE.gz, p_web.css, and index.html. Add autoconf
-- to Buildrequires.
-
-* Wed Mar 27 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-3
-- Doc css has changed names.
-
-* Tue Mar 25 2002 Hal Burgiss <hal@xxxxxxxxxx>
-+ privoxy-2.9.13-3
-- Minor fix to description.
-
-* Sun Mar 24 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- added faq to docs.
-
-* Thu Mar 21 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- added ijb_docs.css to docs.
-
-* Mon Mar 11 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Remove --enable-no-gifs from configure.
-
-* Sun Mar 03 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- /bin/false for shell causes init script to fail. Reverting.
-
-* Wed Jan 09 2002 Hal Burgiss <hal@xxxxxxxxxx>
-- Removed UID 73. Included user-manual and developer-manual in docs.
-  Include other actions files. Default shell is now /bin/false.
-  Userdel user=junkbust. ChangeLog was not zipped. Removed
-  RPM_OPT_FLAGS kludge.
-
-* Fri Dec 28 2001 Thomas Steudten <thomas@xxxxxxxxxxx>
-- add paranoia check for 'rm -rf $RPM_BUILD_ROOT'
-- add gzip to 'BuildRequires'
-
-* Sat Dec  1 2001 Hal Burgiss <hal@xxxxxxxxxx>
-- actionsfile is now ijb.action.
-
-* Tue Nov  6 2001 Thomas Steudten <thomas@xxxxxxxxxxx>
-- Compress manpage
-- Add more documents for installation
-- Add version string to name and source
-
-* Wed Oct 24 2001 Hal Burigss <hal@xxxxxxxxxx>
-- Back to user 'junkbuster' and fix configure macro.
-
-* Wed Oct 10 2001 Hal Burigss <hal@xxxxxxxxxx>
-- More changes for user 'junkbust'. Init script had 'junkbuster'.
-
-* Sun Sep 23 2001 Hal Burgiss <hal@xxxxxxxxxx>
-- Change of $RPM_OPT_FLAGS handling. Added new HTML doc files.
-- Changed owner of /etc/junkbuster to shut up PAM/xauth log noise.
-
-* Thu Sep 13 2001 Hal Burgiss <hal@xxxxxxxxxx>
-- Added $RPM_OPT_FLAGS support, renaming of old logfile, and
-- made sure no default shell exists for user junkbust.
-
-* Sun Jun  3 2001 Stefan Waldherr <stefan@xxxxxxxxxxxx>
-- rework of RPM
-* Wed Feb 14 2001 - uli@xxxxxxx
-- fixed init script
-* Wed Dec 06 2000 - bjacke@xxxxxxx
-- renamed package to junkbuster
-- fixed copyright tag
-* Thu Nov 30 2000 - uli@xxxxxxx
-- moved init script to /etc/init.d
-* Wed Feb 16 2000 - kukuk@xxxxxxx
-- Move /usr/man -> /usr/share/man
-- Mark /etc/ijb as "config(noreplace)"
-* Mon Sep 20 1999 - uli@xxxxxxx
-- fixed init script
-* Mon Sep 13 1999 - bs@xxxxxxx
-- ran old prepare_spec on spec file to switch to new prepare_spec.
-* Thu Apr 01 1999 - daniel@xxxxxxx
-- do not start ijb as root (security)
-* Tue Mar 30 1999 - daniel@xxxxxxx
-- don´t use saclfile.ini
-* Tue Mar 30 1999 - daniel@xxxxxxx
-- small fix to whitelist-configuration,
-  version is and was 2.0.2 WITHOUT Stefan Waldherr's patches
-  (http://www.waldherr.org/junkbuster/)
-* Mon Mar 01 1999 - daniel@xxxxxxx
-- new package: version 2.0
-
-# $Log: privoxy-suse.spec,v $
-# Revision 1.33  2009/03/21 10:46:15  fabiankeil
-# Bump version to 3.0.12.
-#
-# Revision 1.32  2009/02/15 17:18:14  fabiankeil
-# - Bump version to 3.0.11.
-#
-# Revision 1.31  2008/08/30 12:46:49  fabiankeil
-# The jarfile directive is gone. Update accordingly.
-#
-# Revision 1.30  2008/08/13 16:57:46  fabiankeil
-# Change version to 3.0.10.
-#
-# Revision 1.29  2008/03/02 17:36:43  fabiankeil
-# Set version to 3.0.9.
-#
-# Revision 1.28  2008/01/20 14:30:59  fabiankeil
-# Set version to 3.0.8.
-#
-# Revision 1.27  2006/11/18 14:37:12  fabiankeil
-# Bump version to 3.0.6.
-#
-# Revision 1.26  2006/09/20 23:51:26  hal9
-# Bump versions to 3.0.5
-#
-# Revision 1.25  2006/09/09 00:35:10  hal9
-# Bumped versions to 3.0.4. Both files should be checked further.
-#
-# Revision 1.24  2006/07/18 14:48:47  david__schmidt
-# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-# with what was really the latest development (the v_3_0_branch branch)
-#
-# Revision 1.20.2.10  2004/01/30 17:09:29  oes
-# Bumped version for 3.0.3
-#
-# Revision 1.20.2.9  2003/03/26 00:24:58  oes
-# Bump version for 3.0.2
-#
-# Revision 1.20.2.8  2003/03/20 03:27:11  hal9
-# Bump version for 3.0.1 pending release.
-#
-# Revision 1.20.2.7  2002/08/25 23:36:03  hal9
-# Bump version for 3.0.0.
-#
-# Revision 1.20.2.6  2002/08/10 11:28:50  oes
-# Bumped version
-#
-# Revision 1.20.2.5  2002/08/07 01:08:49  hal9
-# Bumped version to 2.9.18.
-#
-# Revision 1.20.2.4  2002/07/30 21:51:19  hal9
-# Bump version to 2.9.17.
-#
-# Revision 1.20.2.3  2002/07/27 15:47:10  hal9
-# Reset version and release for 2.9.16.
-#
-# Revision 1.20.2.2  2002/05/28 02:39:38  hal9
-# Replace index.html with privoxy-index.html for docs.
-#
-# Revision 1.20.2.1  2002/05/26 17:20:23  hal9
-# Add images to doc dirs.
-#
-# Revision 1.20  2002/05/25 02:08:23  hal9
-# Add doc/images directory.
-# Redhat: alphabetized list of templates (and I think added one in the process)
-#
-# Revision 1.19  2002/05/03 17:14:36  morcego
-# *.spec: Version bump to 2.9.15
-# -rh.spec: noreplace for %%{privoxyconf}/config
-#           Will interrupt the build if versions from configure.in and
-# 		specfile do not match
-#
-# Revision 1.18  2002/04/27 20:26:59  swa
-# uid, gui 73 incorporated
-#
-# Revision 1.17  2002/04/26 15:51:05  morcego
-# Changing Vendor value to Privoxy.Org
-#
-# Revision 1.16  2002/04/22 16:32:31  morcego
-# configure.in, *.spec: Bumping release to 2 (2.9.14-2)
-# -rh.spec: uid and gid are now macros
-# -suse.spec: Changing the header Copyright to License (Copyright is
-#             deprecable)
-#
-# Revision 1.15  2002/04/16 18:49:07  oes
-# Build with static built-in pcre
-#
-# Revision 1.14  2002/04/11 17:57:40  oes
-# Fixed(?) Conflicts: Provides: Obsoletes:
-#
-# Revision 1.13  2002/04/11 10:09:20  oes
-# Version 2.9.14
-#
-# Revision 1.12  2002/04/09 13:29:43  swa
-# build suse and gen-dist with html docs. do not generate docs while building rpm
-#
-# Revision 1.11  2002/04/09 03:12:37  hal9
-# Add LICENSE, p_web.css and index.html. Add autoconf to buildrequires.
-#
-# Revision 1.10  2002/04/08 20:24:13  swa
-# fixed JB spelling
-#
-# Revision 1.9  2002/03/30 09:01:52  swa
-# new release
-#
-# Revision 1.8  2002/03/27 23:46:41  hal9
-# ijb_docs.css to p_doc.css
-#
-# Revision 1.7  2002/03/27 00:49:39  hal9
-# Minor fix to description.
-#
-# Revision 1.6  2002/03/26 22:29:55  swa
-# we have a new homepage!
-#
-# Revision 1.5  2002/03/25 03:10:50  hal9
-# Added faq to docs.
-#
-# Revision 1.4  2002/03/24 12:56:21  swa
-# name change related issues.
-#
-# Revision 1.3  2002/03/24 12:44:31  swa
-# new version string
-#
-# Revision 1.2  2002/03/24 11:40:14  swa
-# name change
-#
-# Revision 1.1  2002/03/24 11:23:44  swa
-# name change
-#
-# Revision 1.21  2002/03/21 16:04:33  hal9
-# added ijb_docs.css to %%doc
-#
-# Revision 1.20  2002/03/12 13:42:14  sarantis
-# remove hardcoded "ijbswa" from build phase
-#
-# Revision 1.19  2002/03/11 22:59:05  hal9
-# Remove --enable-no-gifs
-#
-# Revision 1.18  2002/03/11 12:30:31  swa
-# be consistent with rh spec file
-#
-# Revision 1.17  2002/03/08 19:30:23  swa
-# remove user junkbuster after de-installation.
-# synced suse with rh-specfile. installation
-# and de-installation seem to work.
-#
-# Revision 1.16  2002/03/08 18:40:44  swa
-# build requires tools. useradd and del works
-# now.
-#
-# Revision 1.15  2002/03/07 19:23:50  swa
-# i hate to scroll. suse: wrong configdir.
-#
-# Revision 1.14  2002/03/07 19:10:21  swa
-# builds cleanly. thanks to kukuk@xxxxxxx
-# not yet tested.
-#
-# Revision 1.13  2002/03/07 18:25:56  swa
-# synced redhat and suse build process
-#
-# Revision 1.12  2002/03/02 15:50:04  swa
-# 2.9.11 version. more input for docs.
-#
-# Revision 1.11  2001/12/02 10:29:26  swa
-# New version made these changes necessary.
-#
-# Revision 1.10  2001/10/31 19:27:27  swa
-# consistent description. new name for suse since
-# we had troubles with rpms of identical names
-# on the webserver.
-#
-# Revision 1.9  2001/10/26 18:17:23  swa
-# new version string
-#
-# Revision 1.8  2001/09/13 16:22:42  swa
-# man page is legacy. suse rpm now contains html
-# documentation.
-#
-# Revision 1.7  2001/09/10 17:44:22  swa
-# integrate three pieces of documentation.
-#
-# Revision 1.6  2001/09/10 16:29:23  swa
-# binary contained debug info.
-# buildroot definition fucks up the build process under suse.
-# program needs to write in varlogjunkbuster
-# install all templates
-# create varlogjunkbuster
-#
-# Revision 1.5  2001/06/09 09:13:29  swa
-# description shorter
-#
-# Revision 1.4  2001/06/08 20:53:36  swa
-# use buildroot, export init to separate file (better manageability)
-#
-# Revision 1.3  2001/06/07 17:28:10  swa
-# cosmetics
-#
-# Revision 1.2  2001/06/07 17:18:44  swa
-# header fixed
-#
-#
diff --git a/external/privoxy/privoxy.1 b/external/privoxy/privoxy.1
deleted file mode 100644
index dca772a..0000000
--- a/external/privoxy/privoxy.1
+++ /dev/null
@@ -1,216 +0,0 @@
-.\" This manpage has been automatically generated by docbook2man 
-.\" from a DocBook document.  This tool can be found at:
-.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
-.\" Please send any bug reports, improvements, comments, patches, 
-.\" etc. to Steve Cheng <steve@xxxxxxxxxxxxxxx>.
-.TH "PRIVOXY" "1" "21 March 2009" "Privoxy 3.0.12" ""
-.SH NAME
-privoxy \- Privacy Enhancing Proxy
-.SH SYNOPSIS
-
-\fBprivoxy\fR [\fB\-\-help\fR ] [\fB\-\-version\fR ] [\fB\-\-no-daemon\fR ] [\fB\-\-pidfile \fIpidfile\fB\fR ] [\fB\-\-user \fIuser[.group]\fB\fR ] [\fB\-\-chroot\fR ] [\fB\-\-pre-chroot-nslookup \fIhostname\fB\fR ] [\fB\fIconfigfile\fB\fR ]
-
-.SH "OPTIONS"
-.PP
-\fBPrivoxy\fR may be invoked with the following command line
-options:
-.TP
-\fB\-\-help\fR
-Print brief usage info and exit.
-.TP
-\fB\-\-version\fR
-Print version info and exit.
-.TP
-\fB\-\-no-daemon\fR
-Don't  become  a daemon, i.e. don't fork and become process group
-leader, don't detach from controlling tty, and do all logging there.
-.TP
-\fB\-\-pidfile \fIpidfile\fB\fR
-On startup, write the process ID to \fIpidfile\fR.
-Delete the \fIpidfile\fR on exit.
-Failure to create or delete the \fIpidfile\fR
-is non-fatal. If no \fB\-\-pidfile\fR option is given, no PID file will be used.
-.TP
-\fB\-\-user \fIuser[.group]\fB\fR
-After (optionally) writing the PID file, assume the user ID of
-\fIuser\fR and the GID of
-\fIgroup\fR, or, if the optional
-\fIgroup\fR was not given, the default group of
-\fIuser\fR. Exit if the privileges are not
-sufficient to do so.
-.TP
-\fB\-\-chroot\fR
-Before changing to the user ID given in the \-\-user option, chroot to
-that user's home directory, i.e. make the kernel pretend to the
-\fBPrivoxy\fR process that the directory tree starts
-there. If set up carefully, this can limit the impact of possible
-vulnerabilities in \fBPrivoxy\fR to the files contained in
-that hierarchy. 
-.TP
-\fB\-\-pre-chroot-nslookup \fIhostname\fB\fR
-Initialize the resolver library using \fIhostname\fR
-before chroot'ing. On some systems this reduces the number of files
-that must be copied into the chroot tree.
-.PP
-If the \fIconfigfile\fR is not specified on  the  command  line,
-\fBPrivoxy\fR  will  look for a file named
-\fIconfig\fR in the current directory. If no
-\fIconfigfile\fR is found, \fBPrivoxy\fR will 
-fail to start.
-.SH "DESCRIPTION"
-.PP
-Privoxy is a non-caching web proxy with advanced filtering capabilities
-for enhancing privacy, modifying web page data and HTTP headers, controlling
-access, and removing ads and other obnoxious Internet junk. Privoxy has a
-flexible configuration and can be customized to suit individual needs and tastes.
-It has application for both stand-alone systems and multi-user networks.
-.PP
-Privoxy is Free Software and licensed under the GPL2.
-.SH "INSTALLATION AND USAGE"
-.PP
-Browsers can either be individually configured to use
-\fBPrivoxy\fR as a HTTP proxy (recommended),
-or \fBPrivoxy\fR can be combined with a packet
-filter to build an intercepting proxy
-(see \fIconfig\fR).  The default setting is  for
-localhost,  on port  8118 (configurable in the main config file).  To set the
-HTTP proxy in Firefox, go through: \fBTools\fR; 
-\fBOptions\fR; \fBGeneral\fR;
-\fBConnection Settings\fR;
-\fBManual Proxy Configuration\fR. 
-.PP
-For Internet Explorer, go through: \fBTools\fR; 
-\fBInternet Properties\fR; \fBConnections\fR;
-\fBLAN Settings\fR. 
-.PP
-The Secure (SSL) Proxy should also be set to the same values, otherwise
-https: URLs will not be proxied. Note: \fBPrivoxy\fR can only
-proxy HTTP and HTTPS traffic. Do not try it with FTP or other protocols.
-HTTPS presents some limitations, and not all features will work with HTTPS 
-connections.
-.PP
-For other browsers, check the documentation.
-.SH "CONFIGURATION"
-.PP
-\fBPrivoxy\fR can be configured with the various configuration
-files. The default configuration files are: \fIconfig\fR,
-\fIdefault.filter\fR, \fIdefault.action\fR and
-\fIdefault.action\fR. \fIuser.action\fR should 
-be used for locally defined exceptions to the default rules in
-\fImatch-all.action\fR and \fIdefault.action\fR,
-and \fIuser.filter\fR for locally defined filters. These are
-well commented.  On Unix and Unix-like systems, these are located in
-\fI/etc/privoxy/\fR by default. 
-.PP
-\fBPrivoxy\fR uses the concept of \fBactions\fR 
-in order to manipulate the data stream between the browser and remote sites.
-There are various actions available with specific functions for such things 
-as blocking web sites, managing cookies, etc. These actions can be invoked
-individually or combined, and used against individual URLs, or groups of URLs 
-that can be defined using wildcards and regular expressions. The result is
-that the user has greatly enhanced control and freedom.
-.PP
-The actions list (ad blocks, etc) can also be configured with your
-web browser at http://config.privoxy.org/ 
-(assuming the configuration allows it).
-\fBPrivoxy's\fR configuration parameters  can also  be viewed at
-the same page. In addition, \fBPrivoxy\fR can be toggled on/off.
-This is an internal page, and does not require Internet access.
-.PP
-See the \fIUser Manual\fR for a detailed
-explanation of installation, general usage, all configuration options, new
-features and notes on upgrading.
-.SH "FILES"
-
-.nf
- 
- \fI/usr/sbin/privoxy\fR
- \fI/etc/privoxy/config\fR
- \fI/etc/privoxy/match-all.action\fR
- \fI/etc/privoxy/default.action\fR
- \fI/etc/privoxy/user.action\fR
- \fI/etc/privoxy/default.filter\fR
- \fI/etc/privoxy/user.filter\fR
- \fI/etc/privoxy/trust\fR
- \fI/etc/privoxy/templates/*\fR
- \fI/var/log/privoxy/logfile\fR
-.fi
-.PP
-Various other files should be included, but may vary depending on platform
-and build configuration. Additional documentation should be included in the local
-documentation directory.
-.SH "SIGNALS"
-.PP
-\fBPrivoxy\fR terminates on the \fBSIGINT\fR,
-\fBSIGTERM\fR and \fBSIGABRT\fR signals. Log
-rotation scripts may cause a re-opening of the logfile by sending a 
-\fBSIGHUP\fR to \fBPrivoxy\fR. Note that unlike
-other daemons,  \fBPrivoxy\fR does not need to be made aware of
-config file changes by \fBSIGHUP\fR -- it will detect them
-automatically. 
-.SH "NOTES"
-.PP
-Please see the \fIUser Manual\fR on how to contact the
-developers, for feature requests, reporting problems, and other questions.
-.SH "SEE ALSO"
-.PP
-Other references and sites of interest to \fBPrivoxy\fR
-users:
-.PP
-
-http://www.privoxy.org/, 
-the \fBPrivoxy\fR Home page. 
-
-http://www.privoxy.org/faq/, 
-the \fBPrivoxy\fR FAQ. 
-
-http://www.privoxy.org/developer-manual/, 
-the \fBPrivoxy\fR developer manual. 
-
-https://sourceforge.net/projects/ijbswa/, 
-the Project Page for \fBPrivoxy\fR on 
-SourceForge.
-
-http://config.privoxy.org/,
-the web-based user interface. \fBPrivoxy\fR must be
-running for this to work. Shortcut: http://p.p/
-
-https://sourceforge.net/tracker/?group_id=11118&atid=460288, to submit ``misses'' and other
-configuration related suggestions to the developers. 
-.SH "DEVELOPMENT TEAM"
-
-.nf
- Fabian Keil, lead developer
- David Schmidt, developer
-
- Hal Burgiss
- Mark Miller
- Gerry Murphy
- Lee Rian
- Roland Rosenfeld
- J\[:o]rg Strohmayer
-.fi
-.SH "COPYRIGHT AND LICENSE"
-.SS "COPYRIGHT"
-.PP
-Copyright (C) 2001-2009 by Privoxy Developers <ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx>
-.PP
-Some source code is based on code Copyright (C) 1997 by Anonymous Coders
-and Junkbusters, Inc. and licensed under the \fIGNU General Public
-License\fR.
-.SS "LICENSE"
-.PP
-\fBPrivoxy\fR is free software; you can
-redistribute it and/or modify it under the terms of the 
-\fIGNU General Public License\fR, version 2,
-as published by the Free Software Foundation.
-.PP
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the  \fIGNU General Public License\fR for details.
-.PP
-You should have received a copy of the \fIGNU GPL\fR
-along with this program; if not, write to the  Free Software
-Foundation, Inc. 51 Franklin Street, Fifth Floor
-Boston, MA 02110-1301
-USA 
diff --git a/external/privoxy/privoxy.init b/external/privoxy/privoxy.init
deleted file mode 100644
index 3b3caf9..0000000
--- a/external/privoxy/privoxy.init
+++ /dev/null
@@ -1,276 +0,0 @@
-#!/bin/sh
-#
-# This is file /etc/rc.d/init.d/privoxy and was put here 
-# by the privoxy rpm
-#
-# chkconfig: 2345 84 09
-#
-# description: Web proxy with advanced filtering capabilities \
-#              such as filtering web page content, managing \
-#              cookies and removing ads
-#
-
-#  ********************************************************************
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/privoxy.init,v $
-# 
-#  Purpose     :  This shell script takes care of starting and stopping
-#                 privoxy.
-# 
-#  Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                 Privoxy team. http://www.privoxy.org/
-# 
-#                 Based on the Internet Junkbuster originally written
-#                 by and Copyright (C) 1997 Anonymous Coders and
-#                 Junkbusters Corporation.  http://www.junkbusters.com
-# 
-#                 This program is free software; you can redistribute it
-#                 and/or modify it under the terms of the GNU General
-#                 Public License as published by the Free Software
-#                 Foundation; either version 2 of the License, or (at
-#                 your option) any later version.
-# 
-#                 This program is distributed in the hope that it will
-#                 be useful, but WITHOUT ANY WARRANTY; without even the
-#                 implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                 PARTICULAR PURPOSE.  See the GNU General Public
-#                 License for more details.
-# 
-#                 The GNU General Public License should be included with
-#                 this file.  If not, you can view it at
-#                 http://www.gnu.org/copyleft/gpl.html
-#                 or write to the Free Software Foundation, Inc., 59
-#                 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-# 
-#  Revisions   :
-#     $Log: privoxy.init,v $
-#     Revision 1.11  2006/07/18 14:48:47  david__schmidt
-#     Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#     with what was really the latest development (the v_3_0_branch branch)
-#
-#     Revision 1.8.2.3  2002/12/10 20:52:16  kick_
-#     better service description. This text will be shown when the user configures the services
-#
-#     Revision 1.8.2.2  2002/08/05 08:42:13  kick_
-#     same permissions, same runlevels as all the other initscripts
-#
-#     Revision 1.8.2.1  2002/07/12 09:14:26  kick_
-#     don't use ghost files for rcX.d/*, chkconfig is available to do this job. Enable translation of error messge
-#
-#     Revision 1.8  2002/04/09 02:51:31  hal9
-#     Changed $JB to $PRIVOXY.
-#
-#     Revision 1.7  2002/04/08 14:54:51  morcego
-#     Moved the chkconfig comments to the begining of the file, couse Linuxconf
-#     was getting confused with it where it was.
-#
-#     Revision 1.6  2002/03/26 22:29:55  swa
-#     we have a new homepage!
-#
-#     Revision 1.5  2002/03/25 06:14:18  morcego
-#     Removing the OPRG definition (no longer needed)
-#
-#     Revision 1.4  2002/03/25 04:16:48  hal9
-#     Fix proper config file location.
-#
-#     Revision 1.3  2002/03/24 19:12:15  hal9
-#     Fixed some naming conflicts.
-#
-#     Revision 1.2  2002/03/24 11:40:14  swa
-#     name change
-#
-#     Revision 1.1  2002/03/24 11:23:44  swa
-#     name change
-#
-#     Revision 1.1  2002/03/22 20:53:03  morcego
-#     - Ongoing process to change name to JunkbusterNG
-#     - configure/configure.in: no change needed
-#     - GNUmakefile.in:
-#             - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
-#             - PROGRAM    = jbng@EXEEXT@
-#             - rh-spec now references as junkbusterng-rh.spec
-#             - redhat-upload: references changed to junkbusterng-* (package names)
-#             - tarball-dist: references changed to JunkbusterNG-distribution-*
-#             - tarball-src: now JunkbusterNG-*
-#             - install: initscript now junkbusterng.init and junkbusterng (when
-#                        installed)
-#     - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
-#     - junkbusterng.spec:
-#             - References to the expression ijb where changed where possible
-#             - New package name: junkbusterng (all in lower case, acording to
-#               the LSB recomendation)
-#             - Version changed to: 2.9.13
-#             - Release: 1
-#             - Added: junkbuster to obsoletes and conflicts (Not sure this is
-#               right. If it obsoletes, why conflict ? Have to check it later)
-#             - Summary changed: Stefan, please check and aprove it
-#             - Changes description to use the new name
-#             - Sed string was NOT changed. Have to wait to the manpage to
-#               change first
-#             - Keeping the user junkbuster for now. It will require some aditional
-#               changes on the script (scheduled for the next specfile release)
-#             - Added post entry to move the old logfile to the new log directory
-#             - Removing "chkconfig --add" entry (not good to have it automaticaly
-#               added to the startup list).
-#             - Added preun section to stop the service with the old name, as well
-#               as remove it from the startup list
-#             - Removed the chkconfig --del entry from the conditional block on
-#               the preun scriptlet (now handled on the %files section)
-#     - junkbuster.init: renamed to junkbusterng.init
-#     - junkbusterng.init:
-#             - Changed JB_BIN to jbng
-#             - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
-#               be used where necessary (config dir)
-#
-#     Aditional notes:
-#     - The config directory is /etc/junkbuster yet. Have to change it on the
-#     specfile, after it is changes on the code
-#     - The only files that got renamed on the cvs tree were the rh specfile and
-#     the init file. Some file references got changes on the makefile and on the
-#     rh-spec (as listed above)
-#
-#     Revision 1.15  2002/03/09 15:05:58  swa
-#     wrong user.group
-#
-#     Revision 1.14  2002/03/06 06:13:40  hal9
-#     Adapted for Andreas' changes for --user and --pidfile.
-#
-#     Revision 1.13  2002/03/05 05:10:10  oes
-#     Changed pidfile path to conform with FHS
-#
-#     Revision 1.12  2002/03/04 20:44:36  oes
-#     Changed to new cmdline syntax
-#
-#     Revision 1.11  2001/12/30 14:07:32  steudten
-#     - Add signal handling (unix)
-#     - Add SIGHUP handler (unix)
-#     - Add creation of pidfile (unix)
-#     - Add action 'top' in rc file (RH)
-#     - Add entry 'SIGNALS' to manpage
-#     - Add exit message to logfile (unix)
-#
-#     Revision 1.10  2001/11/05 21:30:23  steudten
-#     Make JB startup without & due to be a 'real' daemon right now.
-#     Make the script easy to change.
-#
-#     Revision 1.9  2001/09/15 01:53:12  steudten
-#
-#     Remove test for subsys flag in start. Some minor changes.
-#
-#     Revision 1.8  2001/06/28 13:50:36  sarantis
-#     swap ?$ with $?; remove bogus ";;"
-#
-#     Revision 1.7  2001/06/28 13:40:26  sarantis
-#     remove single quotes from $JB; it was not expanded.
-#
-#     Revision 1.6  2001/06/28 13:38:42  sarantis
-#     formatting changes; individual return values are returned from the init script.
-#
-#     Revision 1.5  2001/06/11 11:37:40  sarantis
-#     Minor editing changes.
-#
-#     Revision 1.4  2001/06/09 09:14:11  swa
-#     shamelessly adapted RPM stuff from the newest rpm that
-#     RedHat provided for the JB.
-#
-#     Revision 1.3  2001/05/25 10:12:44  oes
-#     Fixed default case in switch statement (# -> *)
-#
-#     Revision 1.2  2001/05/24 07:52:24  swa
-#     added header. removed ^M.
-#
-# 
-# ********************************************************************/
-
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-. /etc/sysconfig/network
-
-#  Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-PRIVOXY_PRG="privoxy"
-PRIVOXY_BIN="/usr/sbin/$PRIVOXY_PRG"
-PRIVOXY_CONF="/etc/$PRIVOXY_PRG/config"
-PRIVOXY_USER="privoxy"
-PRIVOXY_PID=/var/run/$PRIVOXY_PRG.pid
-PRIVOXY_LOCK=/var/lock/subsys/$PRIVOXY_PRG
-PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER.$PRIVOXY_USER --pidfile $PRIVOXY_PID $PRIVOXY_CONF"
-
-# some checks for us
-! [ -x $PRIVOXY_BIN  ] && echo $"Can't find $PRIVOXY_BIN, exit." && exit 0
-! [ -f $PRIVOXY_CONF ] && echo $"Can't find $PRIVOXY_CONF, exit." && exit 0
-
-# See how we were called.
-
-start () {
-	# start daemon
-	echo -n $"Starting $PRIVOXY_PRG: "
-     if [ -f $PRIVOXY_PID ]; then 
-        killproc $PRIVOXY_PRG && rm -f $PRIVOXY_LOCK $PRIVOXY_PID
-        RETVAL=$?
-        [ $RETVAL != 0 ] && return $RETVAL
-     fi
-	daemon $PRIVOXY
-	RETVAL=$?
-	echo
-	[ $RETVAL = 0 ] && touch $PRIVOXY_LOCK
-	return $RETVAL
-}
-
-stop () {
-	# stop daemon
-	echo -n $"Stopping $PRIVOXY_PRG: "
-	killproc $PRIVOXY_PRG && rm -f $PRIVOXY_LOCK $PRIVOXY_PID
-	RETVAL=$?
-	echo
-	return $RETVAL
-}
-
-case "$1" in
-  start)
-	start	
-	;;
-  stop)
-	stop
-	;;
-  reload)
-	if [ -f $PRIVOXY_PID ] ; then
-        kill -HUP `cat $PRIVOXY_PID`
-        RETVAL=$?
-     fi
-	;;
-  restart)
-	stop
-	start
-	RETVAL=$?
-	;;
-  condrestart)
-	# restart only if already running
-	if [ -f $PRIVOXY_PID ] ; then
-        stop
-        start
-        RETVAL=$?
-	fi 
-	;;
-  status)
-	status $PRIVOXY_PRG 
-	RETVAL=$?
-	;;
-  top)
-     if [ -f $PRIVOXY_PID ]; then
-                a=""
-                for i in `pidof $PRIVOXY_PRG` ; do
-                        a="$a -p $i"
-                done
-                top $a
-     fi
-	;;
-  *)
-	echo $"Usage: $PRIVOXY_PRG {start|stop|reload|restart|condrestart|status|top}"
-	exit 1
-esac
-
-exit $RETVAL
diff --git a/external/privoxy/privoxy.init.suse b/external/privoxy/privoxy.init.suse
deleted file mode 100644
index fee872a..0000000
--- a/external/privoxy/privoxy.init.suse
+++ /dev/null
@@ -1,127 +0,0 @@
-#! /bin/sh
-#  ********************************************************************
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/privoxy.init.suse,v $
-# 
-#  Purpose     :  This shell script takes care of starting and stopping
-#                 privoxy.
-# 
-#  Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                 Privoxy team. http://www.privoxy.org/
-# 
-#                 Based on the Internet Junkbuster originally written
-#                 by and Copyright (C) 1997 Anonymous Coders and
-#                 Junkbusters Corporation.  http://www.junkbusters.com
-# 
-#                 This program is free software; you can redistribute it
-#                 and/or modify it under the terms of the GNU General
-#                 Public License as published by the Free Software
-#                 Foundation; either version 2 of the License, or (at
-#                 your option) any later version.
-# 
-#                 This program is distributed in the hope that it will
-#                 be useful, but WITHOUT ANY WARRANTY; without even the
-#                 implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                 PARTICULAR PURPOSE.  See the GNU General Public
-#                 License for more details.
-# 
-#                 The GNU General Public License should be included with
-#                 this file.  If not, you can view it at
-#                 http://www.gnu.org/copyleft/gpl.html
-#                 or write to the Free Software Foundation, Inc., 59
-#                 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-# 
-#  Revisions   :
-#     $Log: privoxy.init.suse,v $
-#     Revision 1.4  2006/07/18 14:48:47  david__schmidt
-#     Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#     with what was really the latest development (the v_3_0_branch branch)
-#
-#     Revision 1.3.2.1  2003/03/17 14:04:16  oes
-#     No longer use obsolete rc.config
-#
-#     Revision 1.3  2002/03/26 22:29:55  swa
-#     we have a new homepage!
-#
-#     Revision 1.2  2002/03/24 11:40:14  swa
-#     name change
-#
-#     Revision 1.1  2002/03/24 11:23:44  swa
-#     name change
-#
-#     Revision 1.7  2002/03/11 11:44:46  oes
-#     Working in suggestions by Thorsten Kukuk <kukuk@xxxxxxx>
-#
-#     Revision 1.6  2002/03/09 14:56:34  swa
-#     wrong user.group
-#
-#     Revision 1.5  2002/03/08 21:39:59  oes
-#     setgid to nogroup
-#
-#     Revision 1.4  2002/03/05 19:54:37  oes
-#     Preliminary version of SuSE 8.0-certified init script ,-)
-#
-#     Revision 1.3  2002/03/05 05:28:05  oes
-#     Added pidfile creation
-#
-#     Revision 1.2  2001/09/10 16:25:46  swa
-#     jb did not start. none of the arguments worked. fixed.
-#
-#     Revision 1.1  2001/06/08 20:53:36  swa
-#     use buildroot, export init to separate file (better manageability)
-#
-#
-# 
-# ********************************************************************/
-### BEGIN INIT INFO
-# Provides:       privoxy
-# Required-Start: $network $syslog $remote_fs
-# Required-Stop:
-# Default-Start:  3 5
-# Default-Stop:   0 1 2 6
-# Description:    Starts Privoxy
-### END INIT INFO
-
-. /etc/rc.status
-rc_reset  
-
-case "$1" in
-    start)
-        echo -n "Starting Privoxy"
-        if [ ! -f /var/run/privoxy.pid ] || ! kill -0 `cat /var/run/privoxy.pid` 2> /dev/null; then
-           /usr/sbin/privoxy --user privoxy.privoxy --pidfile /var/run/privoxy.pid /etc/privoxy/config 2> /dev/null
-        else     
-           false 
-        fi
-	rc_status -v
-        ;;
-    stop)
-        echo -n "Shutting down Privoxy"
-        killproc -TERM /usr/sbin/privoxy && rm -f /var/run/privoxy.pid
-	rc_status -v
-        ;;
-    reload)
-        echo -n "Reloading Privoxy"
-        kill -HUP `cat /var/run/privoxy.pid`
-        rc_status -v
-        ;;
-    try-restart)
-        $0 stop && $0 start
-	rc_status
-        ;;
-    restart)
-        $0 stop
-        $0 start
-        rc_status
-        ;;           
-    status)
-	echo -n "Checking for Privoxy"
-        checkproc /usr/sbin/privoxy
-	rc_status -v
-        ;;
-    *)
-        echo "Usage: $0 {start|restart|reload|status|stop}"
-        exit 1
-esac
-
-rc_exit
diff --git a/external/privoxy/privoxy.logrotate b/external/privoxy/privoxy.logrotate
deleted file mode 100644
index bbfe652..0000000
--- a/external/privoxy/privoxy.logrotate
+++ /dev/null
@@ -1,107 +0,0 @@
-#
-# Logrotate file for Privoxy RPM
-#
-# ********************************************************************
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/privoxy.logrotate,v $
-# 
-#  Purpose     :  Rotates all potential Privoxy logfiles
-#                 
-# 
-#  Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                 Privoxy team. http://www.privoxy.org/
-# 
-#                 Based on the Internet Junkbuster originally written
-#                 by and Copyright (C) 1997 Anonymous Coders and 
-#                 Junkbusters Corporation.  http://www.junkbusters.com
-# 
-#                 This program is free software; you can redistribute it 
-#                 and/or modify it under the terms of the GNU General
-#                 Public License as published by the Free Software
-#                 Foundation; either version 2 of the License, or (at
-#                 your option) any later version.
-# 
-#                 This program is distributed in the hope that it will
-#                 be useful, but WITHOUT ANY WARRANTY; without even the
-#                 implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                 PARTICULAR PURPOSE.  See the GNU General Public
-#                 License for more details.
-# 
-#                 The GNU General Public License should be included with
-#                 this file.  If not, you can view it at
-#                 http://www.gnu.org/copyleft/gpl.html
-#                 or write to the Free Software Foundation, Inc., 59
-#                 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-# 
-#  Revisions   :
-#     $Log: privoxy.logrotate,v $
-#     Revision 1.6  2006/07/18 14:48:47  david__schmidt
-#     Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#     with what was really the latest development (the v_3_0_branch branch)
-#
-#     Revision 1.4.2.1  2002/06/25 17:33:07  kick_
-#     Avoid error messages if privoxy hasn't run at all and there is no logfile yet by adding missingok to the logrotate script
-#
-#     Revision 1.4  2002/03/26 22:29:55  swa
-#     we have a new homepage!
-#
-#     Revision 1.3  2002/03/24 15:19:57  swa
-#     name change related issue.
-#
-#     Revision 1.2  2002/03/24 11:40:14  swa
-#     name change
-#
-#     Revision 1.1  2002/03/24 11:23:44  swa
-#     name change
-#
-#     Revision 1.7  2001/12/30 14:07:32  steudten
-#     - Add signal handling (unix)
-#     - Add SIGHUP handler (unix)
-#     - Add creation of pidfile (unix)
-#     - Add action 'top' in rc file (RH)
-#     - Add entry 'SIGNALS' to manpage
-#     - Add exit message to logfile (unix)
-#
-#     Revision 1.6  2001/12/13 23:19:43  steudten
-#     Add 'restart' of junkbuster service after rotate logfiles.
-#     Better we could use the well known 'kill -HUP', but the handler
-#     isn't there at this time.
-#
-#     Revision 1.5  2001/11/05 21:31:51  steudten
-#     Change switch mode from weekly to size 1M
-#
-#     Revision 1.4  2001/06/28 13:30:22  sarantis
-#     add missingok for the jarfile entry
-#
-#     Revision 1.3  2001/06/04 18:31:58  swa
-#     files are now prefixed with either `confdir' or `logdir'.
-#     `make redhat-dist' replaces both entries confdir and logdir
-#     with redhat values
-#
-#     Revision 1.2  2001/05/24 07:52:24  swa
-#     added header. removed ^M.
-#
-#     Revision 1.3  2001/05/24 07:41:33  swa
-#     added header
-#
-# 
-# 
-# ********************************************************************/
-
-/var/log/privoxy/logfile {
-   missingok
-   compress
-   size 1M
-   postrotate
-        /sbin/service privoxy reload  2> /dev/null || true
-   endscript
-}
-
-/var/log/privoxy/jarfile {
-   missingok
-   compress
-   size 1M
-   postrotate
-        /sbin/service privoxy reload  2> /dev/null || true
-   endscript
-}
diff --git a/external/privoxy/project.h b/external/privoxy/project.h
deleted file mode 100644
index 300d9d6..0000000
--- a/external/privoxy/project.h
+++ /dev/null
@@ -1,1885 +0,0 @@
-#ifndef PROJECT_H_INCLUDED
-#define PROJECT_H_INCLUDED
-/** Version string. */
-#define PROJECT_H_VERSION "$Id: project.h,v 1.129 2009/03/08 14:12:51 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/project.h,v $
- *
- * Purpose     :  Defines data structures which are widely used in the
- *                project.  Does not define any variables or functions
- *                (though it does declare some macros).
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 the
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: project.h,v $
- *    Revision 1.129  2009/03/08 14:12:51  fabiankeil
- *    All the CSP_FLAG_FOO bit masks should be unsigned ints.
- *
- *    Revision 1.128  2009/03/07 13:09:17  fabiankeil
- *    Change csp->expected_content and_csp->expected_content_length from
- *    size_t to unsigned long long to reduce the likelihood of integer
- *    overflows that would let us close the connection prematurely.
- *    Bug found while investigating #2669131, reported by cyberpatrol.
- *
- *    Revision 1.127  2008/12/20 14:53:55  fabiankeil
- *    Add config option socket-timeout to control the time
- *    Privoxy waits for data to arrive on a socket. Useful
- *    in case of stale ssh tunnels or when fuzz-testing.
- *
- *    Revision 1.126  2008/12/14 17:02:54  fabiankeil
- *    Fix a cparser warning.
- *
- *    Revision 1.125  2008/11/20 08:22:28  fabiankeil
- *    Remove an obsolete comment.
- *
- *    Revision 1.124  2008/11/16 12:43:49  fabiankeil
- *    Turn keep-alive support into a runtime feature
- *    that is disabled by setting keep-alive-timeout
- *    to a negative value.
- *
- *    Revision 1.123  2008/11/10 16:55:59  fabiankeil
- *    Fix a gcc44 warning (in filters.c).
- *
- *    Revision 1.122  2008/10/16 07:11:34  fabiankeil
- *    Fix a bunch of gcc44 conversion warnings.
- *
- *    Revision 1.121  2008/10/09 18:21:41  fabiankeil
- *    Flush work-in-progress changes to keep outgoing connections
- *    alive where possible. Incomplete and mostly #ifdef'd out.
- *
- *    Revision 1.120  2008/09/21 13:36:52  fabiankeil
- *    If change-x-forwarded-for{add} is used and the client
- *    sends multiple X-Forwarded-For headers, append the client's
- *    IP address to each one of them. "Traditionally" we would
- *    lose all but the last one.
- *
- *    Revision 1.119  2008/09/20 10:04:33  fabiankeil
- *    Remove hide-forwarded-for-headers action which has
- *    been obsoleted by change-x-forwarded-for{block}.
- *
- *    Revision 1.118  2008/09/19 15:26:29  fabiankeil
- *    Add change-x-forwarded-for{} action to block or add
- *    X-Forwarded-For headers. Mostly based on code removed
- *    before 3.0.7.
- *
- *    Revision 1.117  2008/08/30 12:03:07  fabiankeil
- *    Remove FEATURE_COOKIE_JAR.
- *
- *    Revision 1.116  2008/05/20 16:05:02  fabiankeil
- *    Move parsers structure definition from project.h to parsers.h.
- *
- *    Revision 1.115  2008/05/19 16:57:20  fabiankeil
- *    Declare all members of the parsers structure immutable.
- *
- *    Revision 1.114  2008/04/11 16:35:39  fabiankeil
- *    Oops, I forgot to shorten the URL_SPEC_INITIALIZER in my last commit.
- *
- *    Revision 1.113  2008/04/10 14:41:04  fabiankeil
- *    Ditch url_spec's path member now that it's no longer used.
- *
- *    Revision 1.112  2008/04/06 15:18:34  fabiankeil
- *    Oh well, rename the --enable-pcre-host-patterns option to
- *    --enable-extended-host-patterns as it's not really PCRE syntax.
- *
- *    Revision 1.111  2008/04/06 14:54:26  fabiankeil
- *    Use PCRE syntax in host patterns when configured
- *    with --enable-pcre-host-patterns.
- *
- *    Revision 1.110  2008/03/29 12:13:46  fabiankeil
- *    Remove send-wafer and send-vanilla-wafer actions.
- *
- *    Revision 1.109  2008/03/28 15:13:41  fabiankeil
- *    Remove inspect-jpegs action.
- *
- *    Revision 1.108  2008/03/27 18:27:36  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.107  2008/03/26 18:07:08  fabiankeil
- *    Add hostname directive. Closes PR#1918189.
- *
- *    Revision 1.106  2008/03/24 11:21:03  fabiankeil
- *    Share the action settings for multiple patterns in the same
- *    section so we waste less memory for gigantic block lists
- *    (and load them slightly faster). Reported by Franz Schwartau.
- *
- *    Revision 1.105  2008/03/21 11:16:27  fabiankeil
- *    Garbage-collect csp->my_ip_addr_str and csp->my_hostname.
- *
- *    Revision 1.104  2008/03/04 18:30:40  fabiankeil
- *    Remove the treat-forbidden-connects-like-blocks action. We now
- *    use the "blocked" page for forbidden CONNECT requests by default.
- *
- *    Revision 1.103  2008/03/01 14:00:45  fabiankeil
- *    Let the block action take the reason for the block
- *    as argument and show it on the "blocked" page.
- *
- *    Revision 1.102  2008/02/03 13:46:14  fabiankeil
- *    Add SOCKS5 support. Patch #1862863 by Eric M. Hopper with minor changes.
- *
- *    Revision 1.101  2007/12/07 18:29:23  fabiankeil
- *    Remove now-obsolete csp member x_forwarded.
- *
- *    Revision 1.100  2007/09/02 13:42:11  fabiankeil
- *    - Allow port lists in url patterns.
- *    - Ditch unused url_spec member pathlen.
- *
- *    Revision 1.99  2007/07/21 11:51:36  fabiankeil
- *    As Hal noticed, checking dispatch_cgi() as the last cruncher
- *    looks like a bug if CGI requests are blocked unintentionally,
- *    so don't do it unless the user enabled the new config option
- *    "allow-cgi-request-crunching".
- *
- *    Revision 1.98  2007/07/14 07:31:26  fabiankeil
- *    Add new csp->content_type flag (CT_DECLARED).
- *
- *    Revision 1.97  2007/05/27 12:38:08  fabiankeil
- *    - Remove some left-overs from the switch to dedicated header filters.
- *    - Adjust "X-Filter: No" to disable dedicated header filters.
- *    - Prepare for forward-override{}
- *
- *    Revision 1.96  2007/05/14 10:41:15  fabiankeil
- *    Ditch the csp member cookie_list[] which isn't used anymore.
- *
- *    Revision 1.95  2007/04/30 15:02:19  fabiankeil
- *    Introduce dynamic pcrs jobs that can resolve variables.
- *
- *    Revision 1.94  2007/04/15 16:39:21  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.93  2007/03/20 15:16:34  fabiankeil
- *    Use dedicated header filter actions instead of abusing "filter".
- *    Replace "filter-client-headers" and "filter-client-headers"
- *    with "server-header-filter" and "client-header-filter".
- *
- *    Revision 1.92  2007/03/17 15:20:05  fabiankeil
- *    New config option: enforce-blocks.
- *
- *    Revision 1.91  2007/03/05 13:28:03  fabiankeil
- *    Add some CSP_FLAGs for the header parsers.
- *
- *    Revision 1.90  2007/02/07 10:36:16  fabiankeil
- *    Add new http_response member to save
- *    the reason why the response was generated.
- *
- *    Revision 1.89  2007/01/27 13:09:16  fabiankeil
- *    Add new config option "templdir" to
- *    change the templates directory.
- *
- *    Revision 1.88  2007/01/25 13:36:59  fabiankeil
- *    Add csp->error_message for failure reasons
- *    that should be embedded into the CGI pages.
- *
- *    Revision 1.87  2007/01/01 19:36:37  fabiankeil
- *    Integrate a modified version of Wil Mahan's
- *    zlib patch (PR #895531).
- *
- *    Revision 1.86  2006/12/31 17:56:37  fabiankeil
- *    Added config option accept-intercepted-requests
- *    and disabled it by default.
- *
- *    Revision 1.85  2006/12/31 15:03:31  fabiankeil
- *    Fix gcc43 compiler warnings and a comment.
- *
- *    Revision 1.84  2006/12/21 12:57:48  fabiankeil
- *    Add config option "split-large-forms"
- *    to work around the browser bug reported
- *    in BR #1570678.
- *
- *    Revision 1.83  2006/12/06 19:26:29  fabiankeil
- *    Moved HTTP snipplets into jcc.c. They aren't
- *    used anywhere else.
- *
- *    Revision 1.82  2006/09/20 15:50:31  fabiankeil
- *    Doubled size of HOSTENT_BUFFER_SIZE to mask
- *    problems with gethostbyname_r and some
- *    /etc/hosts configurations. Only a workaround
- *    until we get the real fix ready.
- *    Thanks Félix Rauch for reporting.
- *
- *    Increased value of MAX_TRUSTED_REFERRERS from 64 to 512.
- *
- *    Revision 1.81  2006/09/06 13:03:04  fabiankeil
- *    Respond with 400 and a short text message
- *    if the client tries to use Privoxy as FTP proxy.
- *
- *    Revision 1.80  2006/09/06 10:43:32  fabiankeil
- *    Added config option enable-remote-http-toggle
- *    to specify if Privoxy should recognize special
- *    headers (currently only X-Filter) to change its
- *    behaviour. Disabled by default.
- *
- *    Revision 1.79  2006/09/06 09:23:37  fabiankeil
- *    Make number of retries in case of forwarded-connect problems
- *    a config file option (forwarded-connect-retries) and use 0 as
- *    default.
- *
- *    Revision 1.78  2006/08/31 16:25:06  fabiankeil
- *    Work around a buffer overflow that caused Privoxy to
- *    segfault if too many trusted referrers were used. Good
- *    enough for now, but should be replaced with a real
- *    solution after the next release.
- *
- *    Revision 1.77  2006/08/21 12:50:51  david__schmidt
- *    Formatting cleanup
- *
- *    Revision 1.76  2006/08/14 08:25:19  fabiankeil
- *    Split filter-headers{} into filter-client-headers{}
- *    and filter-server-headers{}.
- *    Added parse_header_time() to share some code.
- *    Replaced timegm() with mktime().
- *
- *    Revision 1.75  2006/08/03 02:46:41  david__schmidt
- *    Incorporate Fabian Keil's patch work: *    http://www.fabiankeil.de/sourcecode/privoxy/
- *
- *    Revision 1.74  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.72.2.7  2006/01/29 23:10:56  david__schmidt
- *    Multiple filter file support
- *
- *    Revision 1.72.2.6  2004/10/03 12:53:46  david__schmidt
- *    Add the ability to check jpeg images for invalid
- *    lengths of comment blocks.  Defensive strategy
- *    against the exploit:
- *       Microsoft Security Bulletin MS04-028
- *       Buffer Overrun in JPEG Processing (GDI+) Could
- *       Allow Code Execution (833987)
- *    Enabled with +inspect-jpegs in actions files.
- *
- *    Revision 1.72.2.5  2004/01/30 15:29:29  oes
- *    Updated the copyright note
- *
- *    Revision 1.72.2.4  2004/01/13 16:12:14  oes
- *    Fixed double slash in USER_MANUAL_URL. Closes BR #867088.
- *
- *    Revision 1.72.2.3  2003/03/11 11:54:37  oes
- *    Introduced RC_FLAG_* flags for use in child process return code
- *
- *    Revision 1.72.2.2  2002/11/28 18:15:44  oes
- *    Added flag to each cgi_dispatcher that allows or denies
- *    external linking and removed const qualifier from
- *    struct list_entry.str.
- *
- *    Revision 1.72.2.1  2002/08/10 11:25:18  oes
- *    - Include config.h for access to config data
- *    - Include <pcre*.h> depending on where they are
- *
- *    Revision 1.72  2002/05/14 21:35:49  oes
- *    Split HELP_LINK_PREFIX into ACTIONS_HELP_PREFIX and CONFIG_HELP_PREFIX
- *    because of split in user-manual
- *
- *    Revision 1.71  2002/05/12 21:39:36  jongfoster
- *    - Adding Doxygen-style comments to structures and #defines.
- *
- *    Revision 1.70  2002/05/12 16:05:50  jongfoster
- *    Fixing ACTION_MASK_ALL to be unsigned long rather than
- *    just unsigned int.  I don't know if anyone is porting
- *    Privoxy to 16-bit platforms, but if so, +limit-connect
- *    wouldn't have worked because of this bug.
- *
- *    Revision 1.69  2002/05/08 16:00:16  oes
- *    Added size member to struct iob, so it can
- *    be alloced larger than needed.
- *
- *    Revision 1.68  2002/04/26 12:56:00  oes
- *    Killed REDIRECT_URL, added USER_MANUAL_URL and HELP_LINK_PREFIX
- *
- *    Revision 1.67  2002/04/24 02:12:43  oes
- *     - Jon's multiple AF patch:
- *       - Make csp->actions_list an array
- *       - #define MAX_AF_FILES
- *     - Moved CGI_PARAM_LEN_MAX (500) here
- *
- *    Revision 1.66  2002/04/15 19:06:43  jongfoster
- *    Typos
- *
- *    Revision 1.65  2002/04/04 00:36:36  gliptak
- *    always use pcre for matching
- *
- *    Revision 1.64  2002/04/03 22:28:03  gliptak
- *    Removed references to gnu_regex
- *
- *    Revision 1.63  2002/03/31 17:19:00  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.62  2002/03/26 22:48:49  swa
- *    new homepage url
- *
- *    Revision 1.61  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.60  2002/03/24 15:52:17  jongfoster
- *    Changing CGI URL prefixes for new name
- *
- *    Revision 1.59  2002/03/24 15:23:33  jongfoster
- *    Name changes
- *
- *    Revision 1.58  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.57  2002/03/16 20:28:34  oes
- *    Added descriptions to the filters so users will know what they select in the cgi editor
- *
- *    Revision 1.56  2002/03/13 20:27:30  oes
- *    Fixing bug with CT_TABOO
- *
- *    Revision 1.55  2002/03/12 01:42:50  oes
- *    Introduced modular filters
- *
- *    Revision 1.54  2002/03/09 20:03:52  jongfoster
- *    - Making various functions return int rather than size_t.
- *      (Undoing a recent change).  Since size_t is unsigned on
- *      Windows, functions like read_socket that return -1 on
- *      error cannot return a size_t.
- *
- *      THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- *      crashes, and also frequently caused JB to jump to 100%
- *      CPU and stay there.  (Because it thought it had just
- *      read ((unsigned)-1) == 4Gb of data...)
- *
- *    - The signature of write_socket has changed, it now simply
- *      returns success=0/failure=nonzero.
- *
- *    - Trying to get rid of a few warnings --with-debug on
- *      Windows, I've introduced a new type "jb_socket".  This is
- *      used for the socket file descriptors.  On Windows, this
- *      is SOCKET (a typedef for unsigned).  Everywhere else, it's
- *      an int.  The error value can't be -1 any more, so it's
- *      now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- *      Windows it maps to the #define INVALID_SOCKET.)
- *
- *    - The signature of bind_port has changed.
- *
- *    Revision 1.53  2002/03/08 16:48:55  oes
- *    Added FEATURE_NO_GIFS and BUILTIN_IMAGE_MIMETYPE
- *
- *    Revision 1.52  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.51  2002/03/05 04:52:42  oes
- *    Deleted non-errlog debugging code
- *
- *    Revision 1.50  2002/03/04 19:32:07  oes
- *    Changed default port to 8118
- *
- *    Revision 1.49  2002/03/04 18:28:55  oes
- *    Deleted PID_FILE_NAME
- *
- *    Revision 1.48  2002/03/03 14:50:40  oes
- *    Fixed CLF logging: Added ocmd member for client's request to struct http_request
- *
- *    Revision 1.47  2002/02/20 23:15:13  jongfoster
- *    Parsing functions now handle out-of-memory gracefully by returning
- *    an error code.
- *
- *    Revision 1.46  2002/01/17 21:06:09  jongfoster
- *    Now #defining the URLs of the config interface
- *
- *    Minor changes to struct http_request and struct url_spec due to
- *    standardizing that struct http_request is used to represent a URL, and
- *    struct url_spec is used to represent a URL pattern.  (Before, URLs were
- *    represented as seperate variables and a partially-filled-in url_spec).
- *
- *    Revision 1.45  2002/01/09 14:33:27  oes
- *    Added HOSTENT_BUFFER_SIZE
- *
- *    Revision 1.44  2001/12/30 14:07:32  steudten
- *    - Add signal handling (unix)
- *    - Add SIGHUP handler (unix)
- *    - Add creation of pidfile (unix)
- *    - Add action 'top' in rc file (RH)
- *    - Add entry 'SIGNALS' to manpage
- *    - Add exit message to logfile (unix)
- *
- *    Revision 1.43  2001/11/22 21:57:51  jongfoster
- *    Making action_spec->flags into an unsigned long rather than just an
- *    unsigned int.
- *    Adding ACTION_NO_COOKIE_KEEP
- *
- *    Revision 1.42  2001/11/05 21:42:41  steudten
- *    Include DBG() macro.
- *
- *    Revision 1.41  2001/10/28 19:12:06  jongfoster
- *    Adding ijb_toupper()
- *
- *    Revision 1.40  2001/10/26 17:40:47  oes
- *    Moved ijb_isspace and ijb_tolower to project.h
- *    Removed http->user_agent, csp->referrer and csp->accept_types
- *
- *    Revision 1.39  2001/10/25 03:45:02  david__schmidt
- *    Adding a (void*) cast to freez() because Visual Age C++ won't expand the
- *    macro when called with a cast; so moving the cast to the macro def'n
- *    seems to both eliminate compiler warnings (on darwin and OS/2, anyway) and
- *    doesn't make macro expansion complain.  Hope this works for everyone else
- *    too...
- *
- *    Revision 1.38  2001/10/23 21:19:04  jongfoster
- *    New error-handling support: jb_err type and JB_ERR_xxx constants
- *    CGI functions now return a jb_err, and their parameters map is const.
- *    Support for RUNTIME_FEATUREs to enable/disable config editor
- *    Adding a few comments
- *
- *    Revision 1.37  2001/10/14 22:14:01  jongfoster
- *    Removing name_length field from struct cgi_dispatcher, as this is
- *    now calculated at runtime from the "name" field.
- *
- *    Revision 1.36  2001/10/10 16:45:15  oes
- *    Added LIMIT_CONNECT action and string
- *    Fixed HTTP message line termination
- *    Added CFORBIDDEN HTTP message
- *
- *    Revision 1.35  2001/10/07 18:06:43  oes
- *    Added status member to struct http_request
- *
- *    Revision 1.34  2001/10/07 15:45:25  oes
- *    Added url member to struct http_request and commented all
- *      members
- *
- *    Added CT_TABOO
- *
- *    Added ACTION_DOWNGRADE and ACTION_NO_COMPRESSION
- *
- *    Replaced struct client_state members rejected,
- *      force, active and toggled_on with "flags" bitmap.
- *
- *    Added CSP_FLAG_MODIFIED and CSP_FLAG_CHUNKED
- *
- *    Added buffer_limit to struct configuration_spec
- *
- *    Revision 1.33  2001/09/20 13:30:08  steudten
- *
- *    Make freez() more secure in case of: if (exp) { free(z) ; a=*z }
- *    Last case will set z to NULL in free(z) and thats bad..
- *
- *    Revision 1.32  2001/09/16 23:02:51  jongfoster
- *    Fixing warning
- *
- *    Revision 1.31  2001/09/16 13:20:29  jongfoster
- *    Rewrite of list library.  Now has seperate header and list_entry
- *    structures.  Also added a large sprinking of assert()s to the list
- *    code.
- *
- *    Revision 1.30  2001/09/13 23:52:00  jongfoster
- *    Support for both static and dynamically generated CGI pages
- *
- *    Revision 1.29  2001/09/13 23:29:43  jongfoster
- *    Defining FORWARD_SPEC_INITIALIZER
- *
- *    Revision 1.28  2001/09/13 23:05:50  jongfoster
- *    Changing the string paramater to the header parsers a "const".
- *
- *    Revision 1.27  2001/08/05 16:06:20  jongfoster
- *    Modifiying "struct map" so that there are now separate header and
- *    "map_entry" structures.  This means that functions which modify a
- *    map no longer need to return a pointer to the modified map.
- *    Also, it no longer reverses the order of the entries (which may be
- *    important with some advanced template substitutions).
- *
- *    Revision 1.26  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.25  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.24  2001/07/25 17:20:27  oes
- *    Introduced http->user_agent
- *
- *    Revision 1.23  2001/07/18 12:32:23  oes
- *    - Added ACTION_STRING_DEANIMATE
- *    - moved #define freez from jcc.h to project.h
- *
- *    Revision 1.22  2001/07/15 17:51:41  jongfoster
- *    Renaming #define STATIC to STATIC_PCRE
- *
- *    Revision 1.21  2001/07/13 14:03:19  oes
- *     - Reorganized regex header inclusion and #defines to
- *       comply to the scheme in configure.in
- *     - Added csp->content_type and its CT_* keys
- *     - Added ACTION_DEANIMATE
- *     - Removed all #ifdef PCRS
- *
- *    Revision 1.20  2001/06/29 21:45:41  oes
- *    Indentation, CRLF->LF, Tab-> Space
- *
- *    Revision 1.19  2001/06/29 13:33:36  oes
- *    - Improved comments
- *    - Introduced http_request.host_ip_addr_str
- *    - Introduced http_response.head_length
- *    - Introduced config.my_ip_addr_str, config.my_hostname,
- *      config.admin_address and config.proxy_info_url
- *    - Removed config.proxy_args_header and config.proxy_args_trailer,
- *      renamed config.proxy_args_invocation to config.proxy_args
- *    - Removed HTML snipplets and GIFs
- *    - Removed logentry from cancelled commit
- *
- *    Revision 1.18  2001/06/09 10:57:39  jongfoster
- *    Adding definition of BUFFER_SIZE.
- *    Changing struct cgi_dispatcher to use "const" strings.
- *
- *    Revision 1.17  2001/06/07 23:15:09  jongfoster
- *    Merging ACL and forward files into config file.
- *    Moving struct gateway members into struct forward_spec
- *    Removing config->proxy_args_gateways
- *    Cosmetic: Adding a few comments
- *
- *    Revision 1.16  2001/06/04 18:31:58  swa
- *    files are now prefixed with either `confdir' or `logdir'.
- *    `make redhat-dist' replaces both entries confdir and logdir
- *    with redhat values
- *
- *    Revision 1.15  2001/06/04 11:28:53  swa
- *    redirect did not work due to missing /
- *
- *    Revision 1.14  2001/06/03 11:03:48  oes
- *    Added struct map,
- *    added struct http_response,
- *    changed struct interceptors to struct cgi_dispatcher,
- *    moved HTML stuff to cgi.h
- *
- *    Revision 1.13  2001/06/01 20:05:36  jongfoster
- *    Support for +image-blocker{}: added ACTION_IMAGE_BLOCKER
- *    constant, and removed csp->tinygif.
- *
- *    Revision 1.12  2001/06/01 18:49:17  jongfoster
- *    Replaced "list_share" with "list" - the tiny memory gain was not
- *    worth the extra complexity.
- *
- *    Revision 1.11  2001/06/01 10:32:47  oes
- *    Added constants for anchoring selection bitmap
- *
- *    Revision 1.10  2001/05/31 21:33:53  jongfoster
- *    Changes for new actions file, replacing permissionsfile
- *    and parts of the config file.  Also added support for
- *    list_shared.
- *
- *    Revision 1.9  2001/05/31 17:32:31  oes
- *
- *     - Enhanced domain part globbing with infix and prefix asterisk
- *       matching and optional unanchored operation
- *
- *    Revision 1.8  2001/05/29 20:09:15  joergs
- *    HTTP_REDIRECT_TEMPLATE fixed.
- *
- *    Revision 1.7  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/actionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.6  2001/05/27 22:17:04  oes
- *
- *    - re_process_buffer no longer writes the modified buffer
- *      to the client, which was very ugly. It now returns the
- *      buffer, which it is then written by chat.
- *
- *    - content_length now adjusts the Content-Length: header
- *      for modified documents rather than crunch()ing it.
- *      (Length info in csp->content_length, which is 0 for
- *      unmodified documents)
- *
- *    - For this to work, sed() is called twice when filtering.
- *
- *    Revision 1.5  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.4  2001/05/22 18:46:04  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Some minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.3  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "actionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.2  2001/05/17 23:01:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:03  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-/* Declare struct FILE for vars and funcs. */
-#include <stdio.h>
-
-/* Need time_t for file_list */
-#include <time.h>
-/* Needed for pcre choice */
-#include "config.h"
-
-/*
- * Include appropriate regular expression libraries.
- * Note that pcrs and pcre (native) are needed for cgi
- * and are included anyway.
- */
-
-#ifdef STATIC_PCRE
-#  include "pcre.h"
-#else
-#  ifdef PCRE_H_IN_SUBDIR
-#    include <pcre/pcre.h>
-#  else
-#    include <pcre.h>
-#  endif
-#endif
-
-#ifdef STATIC_PCRS
-#  include "pcrs.h"
-#else
-#  include <pcrs.h>
-#endif
-
-#ifdef STATIC_PCRE
-#  include "pcreposix.h"
-#else
-#  ifdef PCRE_H_IN_SUBDIR
-#    include <pcre/pcreposix.h>
-#  else
-#    include <pcreposix.h>
-#  endif
-#endif
-
-#ifdef AMIGA
-#include "amiga.h"
-#endif /* def AMIGA */
-
-#ifdef _WIN32
-/*
- * I don't want to have to #include all this just for the declaration
- * of SOCKET.  However, it looks like we have to...
- */
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-#endif
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef _WIN32
-
-typedef SOCKET jb_socket;
-
-#define JB_INVALID_SOCKET INVALID_SOCKET
-
-#else /* ndef _WIN32 */
-
-/**
- * The type used by sockets.  On UNIX it's an int.  Microsoft decided to
- * make it an unsigned.
- */
-typedef int jb_socket;
-
-/**
- * The error value used for variables of type jb_socket.  On UNIX this
- * is -1, however Microsoft decided to make socket handles unsigned, so
- * they use a different value.
- */
-
-#define JB_INVALID_SOCKET (-1)
-
-#endif /* ndef _WIN32 */
-
-
-/**
- * A standard error code.  This should be JB_ERR_OK or one of the JB_ERR_xxx
- * series of errors.
- */
-typedef int jb_err;
-
-#define JB_ERR_OK         0 /**< Success, no error                        */
-#define JB_ERR_MEMORY     1 /**< Out of memory                            */
-#define JB_ERR_CGI_PARAMS 2 /**< Missing or corrupt CGI parameters        */
-#define JB_ERR_FILE       3 /**< Error opening, reading or writing a file */
-#define JB_ERR_PARSE      4 /**< Error parsing file                       */
-#define JB_ERR_MODIFIED   5 /**< File has been modified outside of the  
-                                 CGI actions editor.                      */
-#define JB_ERR_COMPRESS   6 /**< Error on decompression                   */
-
-/**
- * This macro is used to free a pointer that may be NULL.
- * It also sets the variable to NULL after it's been freed.
- * The paramater should be a simple variable without side effects.
- */
-#define freez(X)  { if(X) { free((void*)X); X = NULL ; } }
-
-
-/**
- * Fix a problem with Solaris.  There should be no effect on other
- * platforms.
- *
- * Solaris's isspace() is a macro which uses it's argument directly
- * as an array index.  Therefore we need to make sure that high-bit
- * characters generate +ve values, and ideally we also want to make
- * the argument match the declared parameter type of "int".
- *
- * Note: Remember to #include <ctype.h> if you use these macros.
- */
-#define ijb_toupper(__X) toupper((int)(unsigned char)(__X))
-#define ijb_tolower(__X) tolower((int)(unsigned char)(__X))
-#define ijb_isspace(__X) isspace((int)(unsigned char)(__X))  
-
-/**
- * Use for statically allocated buffers if you have no other choice.
- * Remember to check the length of what you write into the buffer
- * - we don't want any buffer overflows!
- */
-#define BUFFER_SIZE 5000
-
-/**
- * Max length of CGI parameters (arbitrary limit).
- */
-#define CGI_PARAM_LEN_MAX 500U
-
-/**
- * Buffer size for capturing struct hostent data in the
- * gethostby(name|addr)_r library calls. Since we don't
- * loop over gethostbyname_r, the buffer must be sufficient
- * to accomodate multiple IN A RRs, as used in DNS round robin
- * load balancing. W3C's wwwlib uses 1K, so that should be
- * good enough for us, too.
- */
-/**
- * XXX: Temporary doubled, for some configurations
- * 1K is still too small and we didn't get the
- * real fix ready for inclusion.
- */
-#define HOSTENT_BUFFER_SIZE 2048
-
-/**
- * Do not use.  Originally this was so that you can
- * say "while (FOREVER) { ...do something... }".
- * However, this gives a warning with some compilers (e.g. VC++).
- * Instead, use "for (;;) { ...do something... }".
- */
-#define FOREVER 1
-
-/**
- * Default IP address to listen on, as a string.
- * Set to "127.0.0.1".
- */
-#define HADDR_DEFAULT   "127.0.0.1"
-
-/**
- * Default port to listen on, as a number.
- * Set to 8118.
- */
-#define HADDR_PORT      8118
-
-
-/* Forward def for struct client_state */
-struct configuration_spec;
-
-
-/**
- * Entry in a linked list of strings.
- */
-struct list_entry
-{
-   /**
-    * The string pointer. It must point to a dynamically malloc()ed
-    * string or be NULL for the list functions to work. In the latter
-    * case, just be careful next time you iterate through the list in
-    * your own code.
-    */
-   char *str;
-   
-   /** Next entry in the linked list, or NULL if no more. */
-   struct list_entry *next;
-};
-
-/**
- * A header for a linked list of strings.
- */
-struct list
-{
-   /** First entry in the list, or NULL if the list is empty. */
-   struct list_entry *first;
-
-   /** Last entry in the list, or NULL if the list is empty. */
-   struct list_entry *last;
-};
-
-
-/**
- * An entry in a map.  This is a name=value pair.
- */
-struct map_entry
-{
-   /** The key for the map. */
-   const char *name;
-   /** The value associated with that key. */
-   const char *value;
-   /** The next map entry, or NULL if none. */
-   struct map_entry *next;
-};
-
-/**
- * A map from a string to another string.
- * This is used for the paramaters passed in a HTTP GET request, and
- * to store the exports when the CGI interface is filling in a template.
- */
-struct map
-{
-   /** The first map entry, or NULL if the map is empty. */
-   struct map_entry *first;
-   /** The last map entry, or NULL if the map is empty. */
-   struct map_entry *last;
-};
-
-
-/**
- * A HTTP request.  This includes the method (GET, POST) and
- * the parsed URL.
- *
- * This is also used whenever we want to match a URL against a
- * URL pattern.  This always contains the URL to match, and never
- * a URL pattern.  (See struct url_spec).
- */
-struct http_request
-{
-   char *cmd;      /**< Whole command line: method, URL, Version */
-   char *ocmd;     /**< Backup of original cmd for CLF logging */
-   char *gpc;      /**< HTTP method: GET, POST, ... */
-   char *url;      /**< The URL */
-   char *ver;      /**< Protocol version */
-   int status;     /**< HTTP Status */
-
-   char *host;     /**< Host part of URL */
-   int   port;     /**< Port of URL or 80 (default) */
-   char *path;     /**< Path of URL */
-   char *hostport; /**< host[:port] */
-   int   ssl;      /**< Flag if protocol is https */
-
-   char *host_ip_addr_str; /**< String with dotted decimal representation
-                                of host's IP. NULL before connect_to() */
-
-   char  *dbuffer; /**< Buffer with '\0'-delimited domain name.           */
-   char **dvec;    /**< List of pointers to the strings in dbuffer.       */
-   int    dcount;  /**< How many parts to this domain? (length of dvec)   */
-};
-
-/**
- * Reasons for generating a http_response instead of delivering
- * the requested resource. Mostly ordered the way they are checked
- * for in chat().
- */
-#define RSP_REASON_UNSUPPORTED        1
-#define RSP_REASON_BLOCKED            2
-#define RSP_REASON_UNTRUSTED          3
-#define RSP_REASON_REDIRECTED         4
-#define RSP_REASON_CGI_CALL           5
-#define RSP_REASON_NO_SUCH_DOMAIN     6
-#define RSP_REASON_FORWARDING_FAILED  7
-#define RSP_REASON_CONNECT_FAILED     8
-#define RSP_REASON_OUT_OF_MEMORY      9
-#define RSP_REASON_INTERNAL_ERROR     10
-
-/**
- * Response generated by CGI, blocker, or error handler
- */
-struct http_response
-{
-  char  *status;          /**< HTTP status (string). */
-  struct list headers[1]; /**< List of header lines. */
-  char  *head;            /**< Formatted http response head. */
-  size_t head_length;     /**< Length of http response head. */
-  char  *body;            /**< HTTP document body. */
-  size_t content_length;  /**< Length of body, REQUIRED if binary body. */
-  int    is_static;       /**< Nonzero if the content will never change and
-                               should be cached by the browser (e.g. images). */
-  int reason;             /**< Why the response was generated in the first place. */
-};
-
-/**
- * A URL or a tag pattern.
- */
-struct url_spec
-{
-   /** The string which was parsed to produce this url_spec.
-       Used for debugging or display only.  */
-   char  *spec;
-
-#ifdef FEATURE_EXTENDED_HOST_PATTERNS
-   regex_t *host_regex;/**< Regex for host matching                          */
-#else
-   char  *dbuffer;     /**< Buffer with '\0'-delimited domain name, or NULL to match all hosts. */
-   char **dvec;        /**< List of pointers to the strings in dbuffer.       */
-   int    dcount;      /**< How many parts to this domain? (length of dvec)   */
-   int    unanchored;  /**< Bitmap - flags are ANCHOR_LEFT and ANCHOR_RIGHT.  */
-#endif /* defined FEATURE_EXTENDED_HOST_PATTERNS */
-
-   char  *port_list;   /**< List of acceptable ports, or NULL to match all ports */
-
-   regex_t *preg;      /**< Regex for matching path part                      */
-   regex_t *tag_regex; /**< Regex for matching tags                           */
-};
-
-/**
- * If you declare a static url_spec, this is the value to initialize it to zero.
- */
-#ifndef FEATURE_EXTENDED_HOST_PATTERNS
-#define URL_SPEC_INITIALIZER { NULL, NULL, NULL, 0, 0, NULL, NULL, NULL }
-#else
-#define URL_SPEC_INITIALIZER { NULL, NULL, NULL, NULL, NULL }
-#endif /* def FEATURE_EXTENDED_HOST_PATTERNS */
-
-/**
- * Constant for host part matching in URLs.  If set, indicates that the start of
- * the pattern must match the start of the URL.  E.g. this is not set for the
- * pattern ".example.com", so that it will match both "example.com" and
- * "www.example.com".  It is set for the pattern "example.com", which makes it
- * match "example.com" only, not "www.example.com".
- */
-#define ANCHOR_LEFT  1
-
-/**
- * Constant for host part matching in URLs.  If set, indicates that the end of
- * the pattern must match the end of the URL.  E.g. this is not set for the
- * pattern "ad.", so that it will match any host called "ad", irrespective
- * of how many subdomains are in the fully-qualified domain name.
- */
-#define ANCHOR_RIGHT 2
-
-
-/**
- * An I/O buffer.  Holds a string which can be appended to, and can have data
- * removed from the beginning.
- */
-struct iob
-{
-   char *buf;    /**< Start of buffer        */
-   char *cur;    /**< Start of relevant data */
-   char *eod;    /**< End of relevant data   */
-   size_t size;  /**< Size as malloc()ed     */
-};
-
-
-/**
- * Return the number of bytes in the I/O buffer associated with the passed
- * client_state pointer.
- * May be zero.
- */
-#define IOB_PEEK(CSP) ((CSP->iob->cur > CSP->iob->eod) ? (CSP->iob->eod - CSP->iob->cur) : 0)
-
-
-/**
- * Remove any data in the I/O buffer associated with the passed
- * client_state pointer.
- */
-#define IOB_RESET(CSP) if(CSP->iob->buf) free(CSP->iob->buf); memset(CSP->iob, '\0', sizeof(CSP->iob));
-
-/* Bits for csp->content_type bitmask: */
-#define CT_TEXT    0x0001U /**< Suitable for pcrs filtering. */
-#define CT_GIF     0x0002U /**< Suitable for GIF filtering.  */
-#define CT_TABOO   0x0004U /**< DO NOT filter, irrespective of other flags. */
-
-/* Although these are not, strictly speaking, content types
- * (they are content encodings), it is simple to handle them
- * as such.
- */
-#define CT_GZIP    0x0010U /**< gzip-compressed data. */
-#define CT_DEFLATE 0x0020U /**< zlib-compressed data. */
-
-/**
- * Flag to signal that the server declared the content type,
- * so we can differentiate between unknown and undeclared
- * content types.
- */
-#define CT_DECLARED 0x0040U
-
-/**
- * The mask which includes all actions.
- */
-#define ACTION_MASK_ALL        (~0UL)
-
-/**
- * The most compatible set of actions - i.e. none.
- */
-#define ACTION_MOST_COMPATIBLE                       0x00000000UL
-
-/** Action bitmap: Block the request. */
-#define ACTION_BLOCK                                 0x00000001UL
-/** Action bitmap: Deanimate if it's a GIF. */
-#define ACTION_DEANIMATE                             0x00000002UL
-/** Action bitmap: Downgrade HTTP/1.1 to 1.0. */
-#define ACTION_DOWNGRADE                             0x00000004UL
-/** Action bitmap: Fast redirects. */
-#define ACTION_FAST_REDIRECTS                        0x00000008UL
-/** Action bitmap: Remove or add "X-Forwarded-For" header. */
-#define ACTION_CHANGE_X_FORWARDED_FOR                0x00000010UL
-/** Action bitmap: Hide "From" header. */
-#define ACTION_HIDE_FROM                             0x00000020UL
-/** Action bitmap: Hide "Referer" header.  (sic - follow HTTP, not English). */
-#define ACTION_HIDE_REFERER                          0x00000040UL
-/** Action bitmap: Hide "User-Agent" and similar headers. */
-#define ACTION_HIDE_USER_AGENT                       0x00000080UL
-/** Action bitmap: This is an image. */
-#define ACTION_IMAGE                                 0x00000100UL
-/** Action bitmap: Sets the image blocker. */
-#define ACTION_IMAGE_BLOCKER                         0x00000200UL
-/** Action bitmap: Prevent compression. */
-#define ACTION_NO_COMPRESSION                        0x00000400UL
-/** Action bitmap: Change cookies to session only cookies. */
-#define ACTION_NO_COOKIE_KEEP                        0x00000800UL
-/** Action bitmap: Block rending cookies. */
-#define ACTION_NO_COOKIE_READ                        0x00001000UL
-/** Action bitmap: Block setting cookies. */
-#define ACTION_NO_COOKIE_SET                         0x00002000UL
-/** Action bitmap: Override the forward settings in the config file */
-#define ACTION_FORWARD_OVERRIDE                      0x00004000UL
-/** Action bitmap: Block as empty document */
-#define  ACTION_HANDLE_AS_EMPTY_DOCUMENT             0x00008000UL
-/** Action bitmap: Limit CONNECT requests to safe ports. */
-#define ACTION_LIMIT_CONNECT                         0x00010000UL
-/** Action bitmap: Redirect request. */
-#define  ACTION_REDIRECT                             0x00020000UL
-/** Action bitmap: Crunch or modify "if-modified-since" header. */
-#define ACTION_HIDE_IF_MODIFIED_SINCE                0x00040000UL
-/** Action bitmap: Overwrite Content-Type header. */
-#define ACTION_CONTENT_TYPE_OVERWRITE                0x00080000UL
-/** Action bitmap: Crunch specified server header. */
-#define ACTION_CRUNCH_SERVER_HEADER                  0x00100000UL
-/** Action bitmap: Crunch specified client header */
-#define ACTION_CRUNCH_CLIENT_HEADER                  0x00200000UL
-/** Action bitmap: Enable text mode by force */
-#define ACTION_FORCE_TEXT_MODE                       0x00400000UL
-/** Action bitmap: Enable text mode by force */
-#define ACTION_CRUNCH_IF_NONE_MATCH                  0x00800000UL
-/** Action bitmap: Enable content-dispostion crunching */
-#define ACTION_HIDE_CONTENT_DISPOSITION              0x01000000UL
-/** Action bitmap: Replace or block Last-Modified header */
-#define ACTION_OVERWRITE_LAST_MODIFIED               0x02000000UL
-/** Action bitmap: Replace or block Accept-Language header */
-#define ACTION_HIDE_ACCEPT_LANGUAGE                  0x04000000UL
-
-
-/** Action string index: How to deanimate GIFs */
-#define ACTION_STRING_DEANIMATE             0
-/** Action string index: Replacement for "From:" header */
-#define ACTION_STRING_FROM                  1
-/** Action string index: How to block images */
-#define ACTION_STRING_IMAGE_BLOCKER         2
-/** Action string index: Replacement for "Referer:" header */
-#define ACTION_STRING_REFERER               3
-/** Action string index: Replacement for "User-Agent:" header */
-#define ACTION_STRING_USER_AGENT            4
-/** Action string index: Legal CONNECT ports. */
-#define ACTION_STRING_LIMIT_CONNECT         5
-/** Action string index: Server headers containing this pattern are crunched*/
-#define ACTION_STRING_SERVER_HEADER         6
-/** Action string index: Client headers containing this pattern are crunched*/
-#define ACTION_STRING_CLIENT_HEADER         7
-/** Action string index: Replacement for the "Accept-Language:" header*/
-#define ACTION_STRING_LANGUAGE              8
-/** Action string index: Replacement for the "Content-Type:" header*/
-#define ACTION_STRING_CONTENT_TYPE          9
-/** Action string index: Replacement for the "content-dispostion:" header*/
-#define ACTION_STRING_CONTENT_DISPOSITION  10
-/** Action string index: Replacement for the "If-Modified-Since:" header*/
-#define ACTION_STRING_IF_MODIFIED_SINCE    11
-/** Action string index: Replacement for the "Last-Modified:" header. */
-#define ACTION_STRING_LAST_MODIFIED        12
-/** Action string index: Redirect URL */
-#define ACTION_STRING_REDIRECT             13
-/** Action string index: Decode before redirect? */
-#define ACTION_STRING_FAST_REDIRECTS       14
-/** Action string index: Overriding forward rule. */
-#define ACTION_STRING_FORWARD_OVERRIDE     15
-/** Action string index: Reason for the block. */
-#define ACTION_STRING_BLOCK                16
-/** Action string index: what to do with the "X-Forwarded-For" header. */
-#define ACTION_STRING_CHANGE_X_FORWARDED_FOR 17
-/** Number of string actions. */
-#define ACTION_STRING_COUNT                18
-
-
-/* To make the ugly hack in sed easier to understand */
-#define CHECK_EVERY_HEADER_REMAINING 0
-
-
-/** Index into current_action_spec::multi[] for headers to add. */
-#define ACTION_MULTI_ADD_HEADER              0
-/** Index into current_action_spec::multi[] for content filters to apply. */
-#define ACTION_MULTI_FILTER                  1
-/** Index into current_action_spec::multi[] for server-header filters to apply. */
-#define ACTION_MULTI_SERVER_HEADER_FILTER    2
-/** Index into current_action_spec::multi[] for client-header filters to apply. */
-#define ACTION_MULTI_CLIENT_HEADER_FILTER    3
-/** Index into current_action_spec::multi[] for client-header tags to apply. */
-#define ACTION_MULTI_CLIENT_HEADER_TAGGER    4
-/** Index into current_action_spec::multi[] for server-header tags to apply. */
-#define ACTION_MULTI_SERVER_HEADER_TAGGER    5
-/** Number of multi-string actions. */
-#define ACTION_MULTI_COUNT                   6
-
-
-/**
- * This structure contains a list of actions to apply to a URL.
- * It only contains positive instructions - no "-" options.
- * It is not used to store the actions list itself, only for
- * url_actions() to return the current values.
- */
-struct current_action_spec
-{
-   /** Actions to apply.  A bit set to "1" means perform the action. */
-   unsigned long flags;
-
-   /**
-    * Paramaters for those actions that require them.
-    * Each entry is valid if & only if the corresponding entry in "flags" is
-    * set.
-    */
-   char * string[ACTION_STRING_COUNT];
-
-   /** Lists of strings for multi-string actions. */
-   struct list multi[ACTION_MULTI_COUNT][1];
-};
-
-
-/**
- * This structure contains a set of changes to actions.
- * It can contain both positive and negative instructions.
- * It is used to store an entry in the actions list.
- */
-struct action_spec
-{
-   unsigned long mask; /**< Actions to keep. A bit set to "0" means remove action. */
-   unsigned long add;  /**< Actions to add.  A bit set to "1" means add action.    */
-
-   /**
-    * Paramaters for those actions that require them.
-    * Each entry is valid if & only if the corresponding entry in "flags" is
-    * set.
-    */
-   char * string[ACTION_STRING_COUNT];
-
-   /** Lists of strings to remove, for multi-string actions. */
-   struct list multi_remove[ACTION_MULTI_COUNT][1];
-
-   /** If nonzero, remove *all* strings from the multi-string action. */
-   int         multi_remove_all[ACTION_MULTI_COUNT];
-
-   /** Lists of strings to add, for multi-string actions. */
-   struct list multi_add[ACTION_MULTI_COUNT][1];
-};
-
-
-/**
- * This structure is used to store action files.
- *
- * It contains an URL or tag pattern, and the changes to
- * the actions. It's a linked list and should only be
- * free'd through unload_actions_file() unless there's
- * only a single entry.
- */
-struct url_actions
-{
-   struct url_spec url[1];     /**< The URL or tag pattern. */
-
-   struct action_spec *action; /**< Action settings that might be shared with
-                                    the list entry before or after the current
-                                    one and can't be free'd willy nilly. */
-
-   struct url_actions *next;   /**< Next action section in file, or NULL. */
-};
-
-
-/*
- * Flags for use in csp->flags
- */
- 
-/**
- * Flag for csp->flags: Set if this client is processing data.
- * Cleared when the thread associated with this structure dies.
- */
-#define CSP_FLAG_ACTIVE     0x01U
-
-/**
- * Flag for csp->flags: Set if the server's reply is in "chunked"
- * transfer encoding
- */
-#define CSP_FLAG_CHUNKED    0x02U
-
-/**
- * Flag for csp->flags: Set if this request was enforced, although it would
- * normally have been blocked.
- */
-#define CSP_FLAG_FORCED     0x04U
-
-/**
- * Flag for csp->flags: Set if any modification to the body was done.
- */
-#define CSP_FLAG_MODIFIED   0x08U
-
-/**
- * Flag for csp->flags: Set if request was blocked.
- */
-#define CSP_FLAG_REJECTED   0x10U
-
-/**
- * Flag for csp->flags: Set if we are toggled on (FEATURE_TOGGLE).
- */
-#define CSP_FLAG_TOGGLED_ON 0x20U
-
-/**
- * Flag for csp->flags: Set if an acceptable Connection header
- * is already set.
- */
-#define CSP_FLAG_CLIENT_CONNECTION_HEADER_SET  0x00000040U
-
-/**
- * Flag for csp->flags: Set if adding the 'Connection: close' header
- * for the server isn't necessary.
- */
-#define CSP_FLAG_SERVER_CONNECTION_CLOSE_SET   0x00000080U
-
-/**
- * Flag for csp->flags: Signals header parsers whether they
- * are parsing server or client headers.
- */
-#define CSP_FLAG_CLIENT_HEADER_PARSING_DONE    0x00000100U
-
-/**
- * Flag for csp->flags: Set if adding the Host: header
- * isn't necessary.
- */
-#define CSP_FLAG_HOST_HEADER_IS_SET            0x00000200U
-
-/**
- * Flag for csp->flags: Set if filtering is disabled by X-Filter: No
- * XXX: As we now have tags we might as well ditch this.
- */
-#define CSP_FLAG_NO_FILTERING                  0x00000400U
-
-/**
- * Flag for csp->flags: Set the client IP has appended to
- * an already existing X-Forwarded-For header in which case
- * no new header has to be generated.
- */
-#define CSP_FLAG_X_FORWARDED_FOR_APPENDED      0x00000800U
-
-/**
- * Flag for csp->flags: Set if the server wants to keep
- * the connection alive.
- */
-#define CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE  0x00001000U
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-/**
- * Flag for csp->flags: Set if the server specified the
- * content length.
- */
-#define CSP_FLAG_CONTENT_LENGTH_SET            0x00002000U
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-/*
- * Flags for use in return codes of child processes
- */
-
-/**
- * Flag for process return code: Set if exiting porcess has been toggled
- * during its lifetime.
- */
-#define RC_FLAG_TOGGLED   0x10
-
-/**
- * Flag for process return code: Set if exiting porcess has blocked its
- * request.
- */
-#define RC_FLAG_BLOCKED   0x20
-
-/**
- * Maximum number of actions/filter files.  This limit is arbitrary - it's just used
- * to size an array.
- */
-#define MAX_AF_FILES 10
-
-/**
- * The state of a Privoxy processing thread.
- */
-struct client_state
-{
-   /** The proxy's configuration */
-   struct configuration_spec * config;
-
-   /** The actions to perform on the current request */
-   struct current_action_spec  action[1];
-
-   /** socket to talk to client (web browser) */
-   jb_socket cfd;
-
-   /** socket to talk to server (web server or proxy) */
-   jb_socket sfd;
-
-   /** Multi-purpose flag container, see CSP_FLAG_* above */
-   unsigned int flags;
-
-   /** Client PC's IP address, as reported by the accept() function.
-       As a string. */
-   char *ip_addr_str;
-   /** Client PC's IP address, as reported by the accept() function.
-       As a number. */
-   unsigned long ip_addr_long;
-
-   /** The URL that was requested */
-   struct http_request http[1];
-
-   /*
-    * The final forwarding settings.
-    * XXX: Currently this is only used for forward-override,
-    * so we can free the space in sweep.
-    */
-   struct forward_spec * fwd;
-
-   /** An I/O buffer used for buffering data read from the network */
-   struct iob iob[1];
-
-   /** List of all headers for this request */
-   struct list headers[1];
-
-   /** List of all tags that apply to this request */
-   struct list tags[1];
-
-   /** MIME-Type key, see CT_* above */
-   unsigned int content_type;
-
-   /** Actions files associated with this client */
-   struct file_list *actions_list[MAX_AF_FILES];
-
-   /** pcrs job files. */
-   struct file_list *rlist[MAX_AF_FILES];
-
-   /** Length after content modification. */
-   unsigned long long content_length;
-
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
-   /** Expected length of content after which we
-    * should stop reading from the server socket.
-    */
-   /* XXX: is this the right location? */
-   unsigned long long expected_content_length;
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
-
-#ifdef FEATURE_TRUST
-
-   /** Trust file. */
-   struct file_list *tlist;
-
-#endif /* def FEATURE_TRUST */
-
-   /**
-    * Failure reason to embedded in the CGI error page,
-    * or NULL. Currently only used for socks errors.
-    */
-   char *error_message;
-
-   /** Next thread in linked list. Only read or modify from the main thread! */
-   struct client_state *next;
-};
-
-
-/**
- * A function to add a header
- */
-typedef jb_err (*add_header_func_ptr)(struct client_state *);
-
-/**
- * A function to process a header
- */
-typedef jb_err (*parser_func_ptr    )(struct client_state *, char **);
-
-
-/**
- * List of available CGI functions.
- */
-struct cgi_dispatcher
-{
-   /** The URL of the CGI, relative to the CGI root. */
-   const char * const name;
-
-   /** The handler function for the CGI */
-   jb_err    (* const handler)(struct client_state *csp, struct http_response *rsp, const struct map *parameters);
-
-   /** The description of the CGI, to appear on the main menu, or NULL to hide it. */
-   const char * const description;
-
-   /** A flag that indicates whether unintentional calls to this CGI can cause damage */
-   int harmless;
-};
-
-
-/**
- * A data file used by Privoxy.  Kept in a linked list.
- */
-struct file_list
-{
-   /**
-    * This is a pointer to the data structures associated with the file.
-    * Read-only once the structure has been created.
-    */
-   void *f;
-
-   /**
-    * The unloader function.
-    * Normally NULL.  When we are finished with file (i.e. when we have
-    * loaded a new one), set to a pointer to an unloader function.
-    * Unloader will be called by sweep() (called from main loop) when
-    * all clients using this file are done.  This prevents threading
-    * problems.
-    */
-   void (*unloader)(void *);
-
-   /**
-    * Used internally by sweep().  Do not access from elsewhere.
-    */
-   int active;
-
-   /**
-    * File last-modified time, so we can check if file has been changed.
-    * Read-only once the structure has been created.
-    */
-   time_t lastmodified;
-   
-   /**
-    * The full filename.
-    */
-   char * filename;
-
-   /**
-    * Pointer to next entry in the linked list of all "file_list"s.
-    * This linked list is so that sweep() can navigate it.
-    * Since sweep() can remove items from the list, we must be careful
-    * to only access this value from main thread (when we know sweep
-    * won't be running).
-    */
-   struct file_list *next;
-};
-
-
-#ifdef FEATURE_TRUST
-
-/**
- * The format of a trust file when loaded into memory.
- */
-struct block_spec
-{
-   struct url_spec url[1];   /**< The URL pattern              */
-   int    reject;            /**< FIXME: Please document this! */
-   struct block_spec *next;  /**< Next entry in linked list    */
-};
-
-/**
- * Arbitrary limit for the number of trusted referrers.
- */
-#define MAX_TRUSTED_REFERRERS 512
-
-#endif /* def FEATURE_TRUST */
-
-
-#define SOCKS_NONE    0    /**< Don't use a SOCKS server               */
-#define SOCKS_4      40    /**< original SOCKS 4 protocol              */
-#define SOCKS_4A     41    /**< as modified for hosts w/o external DNS */
-#define SOCKS_5      50    /**< as modified for hosts w/o external DNS */
-
-
-/**
- * How to forward a connection to a parent proxy.
- */
-struct forward_spec
-{
-   /** URL pattern that this forward_spec is for. */
-   struct url_spec url[1];
-
-   /** Connection type.  Must be SOCKS_NONE, SOCKS_4, SOCKS_4A or SOCKS_5. */
-   int   type;
-
-   /** SOCKS server hostname.  Only valid if "type" is SOCKS_4 or SOCKS_4A. */
-   char *gateway_host;
-
-   /** SOCKS server port. */
-   int   gateway_port;
-
-   /** Parent HTTP proxy hostname, or NULL for none. */
-   char *forward_host;
-
-   /** Parent HTTP proxy port. */
-   int   forward_port;
-
-   /** Next entry in the linked list. */
-   struct forward_spec *next;
-};
-
-
-/**
- * Initializer for a static struct forward_spec.
- */
-#define FORWARD_SPEC_INITIALIZER { { URL_SPEC_INITIALIZER }, 0, NULL, 0, NULL, 0, NULL }
-
-/* Supported filter types */
-#define FT_CONTENT_FILTER       0
-#define FT_CLIENT_HEADER_FILTER 1
-#define FT_SERVER_HEADER_FILTER 2
-#define FT_CLIENT_HEADER_TAGGER 3
-#define FT_SERVER_HEADER_TAGGER 4
-
-#define MAX_FILTER_TYPES        5
-
-/**
- * This struct represents one filter (one block) from
- * the re_filterfile. If there is more than one filter
- * in the file, the file will be represented by a
- * chained list of re_filterfile specs.
- */
-struct re_filterfile_spec
-{
-   char *name;                      /**< Name from FILTER: statement in re_filterfile. */
-   char *description;               /**< Description from FILTER: statement in re_filterfile. */
-   struct list patterns[1];         /**< The patterns from the re_filterfile. */
-   pcrs_job *joblist;               /**< The resulting compiled pcrs_jobs. */
-   int type;                        /**< Filter type (content, client-header, server-header). */
-   int dynamic;                     /**< Set to one if the pattern might contain variables
-                                         and has to be recompiled for every request. */
-   struct re_filterfile_spec *next; /**< The pointer for chaining. */
-};
-
-
-#ifdef FEATURE_ACL
-
-#define ACL_PERMIT   1  /**< Accept connection request */
-#define ACL_DENY     2  /**< Reject connection request */
-
-/**
- * An IP address pattern.  Used to specify networks in the ACL.
- */
-struct access_control_addr
-{
-   unsigned long addr;  /**< The IP address as an integer. */
-   unsigned long mask;  /**< The network mask as an integer. */
-   unsigned long port;  /**< The port number. */
-};
-
-/**
- * An access control list (ACL) entry.
- *
- * This is a linked list.
- */
-struct access_control_list
-{
-   struct access_control_addr src[1];  /**< Client IP address */
-   struct access_control_addr dst[1];  /**< Website or parent proxy IP address */
-
-   short action;                       /**< ACL_PERMIT or ACL_DENY */
-   struct access_control_list *next;   /**< The next entry in the ACL. */
-};
-
-#endif /* def FEATURE_ACL */
-
-
-/** Maximum number of loaders (actions, re_filter, ...) */
-#define NLOADERS 8
-
-
-/** configuration_spec::feature_flags: CGI actions editor. */
-#define RUNTIME_FEATURE_CGI_EDIT_ACTIONS             1U
-
-/** configuration_spec::feature_flags: Web-based toggle. */
-#define RUNTIME_FEATURE_CGI_TOGGLE                   2U
-
-/** configuration_spec::feature_flags: HTTP-header-based toggle. */
-#define RUNTIME_FEATURE_HTTP_TOGGLE                  4U
-
-/** configuration_spec::feature_flags: Split large forms to limit the number of GET arguments. */
-#define RUNTIME_FEATURE_SPLIT_LARGE_FORMS            8U
-
-/** configuration_spec::feature_flags: Check the host header for requests with host-less request lines. */
-#define RUNTIME_FEATURE_ACCEPT_INTERCEPTED_REQUESTS 16U
-
-/** configuration_spec::feature_flags: Don't allow to circumvent blocks with the force prefix. */
-#define RUNTIME_FEATURE_ENFORCE_BLOCKS              32U
-
-/** configuration_spec::feature_flags: Allow to block or redirect CGI requests. */
-#define RUNTIME_FEATURE_CGI_CRUNCHING               64U
-
-/** configuration_spec::feature_flags: Try to keep the connection to the server alive. */
-#define RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE      128U
-
-/**
- * Data loaded from the configuration file.
- *
- * (Anomaly: toggle is still handled through a global, not this structure)
- */
-struct configuration_spec
-{
-   /** What to log */
-   int debug;
-   
-   /** Nonzero to enable multithreading. */
-   int multi_threaded;
-
-   /**
-    * Bitmask of features that can be enabled/disabled through the config
-    * file.  Currently defined bits:
-    *
-    * - RUNTIME_FEATURE_CGI_EDIT_ACTIONS
-    * - RUNTIME_FEATURE_CGI_TOGGLE
-    * - RUNTIME_FEATURE_HTTP_TOGGLE
-    * - RUNTIME_FEATURE_SPLIT_LARGE_FORMS
-    */
-   unsigned feature_flags;
-
-   /** The log file name. */
-   const char *logfile;
-
-   /** The config file directory. */
-   const char *confdir;
-
-   /** The directory for customized CGI templates. */
-   const char *templdir;
-
-   /** The log file directory. */
-   const char *logdir;
-
-   /** The full paths to the actions files. */
-   const char *actions_file[MAX_AF_FILES];
-
-   /** The short names of the actions files. */
-   const char *actions_file_short[MAX_AF_FILES];
-
-   /** The administrator's email address */
-   char *admin_address;
-
-   /** A URL with info on this proxy */
-   char *proxy_info_url;
-
-   /** URL to the user manual (on our website or local copy) */
-   char *usermanual;
-
-   /** The file names of the pcre filter files. */
-   const char *re_filterfile[MAX_AF_FILES];
-
-   /** The short names of the pcre filter files. */
-   const char *re_filterfile_short[MAX_AF_FILES];
-
-   /** The hostname to show on CGI pages, or NULL to use the real one. */
-   const char *hostname;
-
-   /** IP address to bind to.  Defaults to HADDR_DEFAULT == 127.0.0.1. */
-   const char *haddr;
-
-   /** Port to bind to.  Defaults to HADDR_PORT == 8118. */
-   int         hport;
-
-   /** Size limit for IOB */
-   size_t buffer_limit;
-
-#ifdef FEATURE_TRUST
-
-   /** The file name of the trust file. */
-   const char * trustfile;
-
-   /** FIXME: DOCME: Document this. */
-   struct list trust_info[1];
-
-   /** FIXME: DOCME: Document this. */
-   struct url_spec *trust_list[MAX_TRUSTED_REFERRERS];
-
-#endif /* def FEATURE_TRUST */
-
-#ifdef FEATURE_ACL
-
-   /** The access control list (ACL). */
-   struct access_control_list *acl;
-
-#endif /* def FEATURE_ACL */
-
-   /** Information about parent proxies (forwarding). */
-   struct forward_spec *forward;
-
-   /** Number of retries in case a forwarded connection attempt fails */
-   int         forwarded_connect_retries;
-
-   /* Timeout when waiting on sockets for data to become available. */
-   int socket_timeout;
-
-   /** All options from the config file, HTML-formatted. */
-   char *proxy_args;
-
-   /** The configuration file object. */
-   struct file_list *config_file_list;
-
-   /** List of loaders */
-   int (*loaders[NLOADERS])(struct client_state *);
-
-   /** Nonzero if we need to bind() to the new port. */
-   int need_bind;
-};
-
-/** Calculates the number of elements in an array, using sizeof. */
-#define SZ(X)  (sizeof(X) / sizeof(*X))
-
-#ifdef FEATURE_FORCE_LOAD
-/** The force load URL prefix. */
-#define FORCE_PREFIX "/PRIVOXY-FORCE"
-#endif /* def FEATURE_FORCE_LOAD */
-
-#ifdef FEATURE_NO_GIFS
-/** The MIME type for images ("image/png" or "image/gif"). */
-#define BUILTIN_IMAGE_MIMETYPE "image/png"
-#else
-#define BUILTIN_IMAGE_MIMETYPE "image/gif"
-#endif /* def FEATURE_NO_GIFS */
-
-
-/* 
- * Hardwired URLs
- */
-
-/** URL for the Privoxy home page. */
-#define HOME_PAGE_URL     "http://www.privoxy.org/";
-
-/** URL for the Privoxy user manual. */
-#define USER_MANUAL_URL   HOME_PAGE_URL VERSION "/user-manual/"
-
-/** Prefix for actions help links  (append to USER_MANUAL_URL). */
-#define ACTIONS_HELP_PREFIX "actions-file.html#"
-
-/** Prefix for config option help links (append to USER_MANUAL_URL). */
-#define CONFIG_HELP_PREFIX  "config.html#"
-
-/*
- * The "hosts" to intercept and display CGI pages.
- * First one is a hostname only, second one can specify host and path.
- *
- * Notes:
- * 1) Do not specify the http: prefix
- * 2) CGI_SITE_2_PATH must not end with /, one will be added automatically.
- * 3) CGI_SITE_2_PATH must start with /, unless it is the empty string.
- */
-#define CGI_SITE_1_HOST "p.p"
-#define CGI_SITE_2_HOST "config.privoxy.org"
-#define CGI_SITE_2_PATH ""
-
-/**
- * The prefix for CGI pages.  Written out in generated HTML.
- * INCLUDES the trailing slash.
- */
-#define CGI_PREFIX  "http://"; CGI_SITE_2_HOST CGI_SITE_2_PATH "/"
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef PROJECT_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/regression-tests.action b/external/privoxy/regression-tests.action
deleted file mode 100644
index bf12a31..0000000
--- a/external/privoxy/regression-tests.action
+++ /dev/null
@@ -1,782 +0,0 @@
-#############################################################################
-# $Id: regression-tests.action,v 1.22 2009/02/22 15:07:58 fabiankeil Exp $
-#############################################################################
-#
-# This is a configuration file for Privoxy-Regression-Test
-# (included in the source tarball's tools directory).
-#
-# After referencing it in your Privoxy configuration both Privoxy and
-# Privoxy-Regression-Test should be good to go.
-#
-#############################################################################
-#
-# Copyright (c) 2007-2009 Fabian Keil <fk@xxxxxxxxxxxxx>
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-#############################################################################
-
-{{settings}}
-for-privoxy-version=3.0.11
-
-# Some dependencies Privoxy-Regression-Test should know about:
-#
-# Level  9 needs = config line user-manual\s+(\.?\.?/|[A-Za-z]:)
-# Level 12 needs = config line enable-edit-actions\s+1
-# Level 13 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE Yes
-# Level 14 needs = feature status FEATURE_CONNECTION_KEEP_ALIVE No
-
-#######################################################
-# Enable taggers to activate the tests on demand
-# and suppress hiding the User-Agent for
-# Privoxy-Regression-Test to save log space.
-#######################################################
-{\
- +client-header-tagger{user-agent} \
- +client-header-tagger{privoxy-control} \
- +client-header-filter{privoxy-control} \
-}
-config.privoxy.org/
-p.p/
-127.0.0.1/
-
-{-hide-user-agent}
-TAG:^User-Agent: Privoxy-Regression-Test
-
-#######################################################
-# Test accept-language{}.
-#######################################################
-
-# Set Header    = Accept-Language: de-de
-# Expect Header = Accept-Language: en-gb
-{+hide-accept-language{en-gb}}
-TAG:^hide-accept-language\{en-gb\}$
-
-# Set Header    = Accept-Language: de-de
-# Expect Header = REMOVAL
-{+hide-accept-language{block}}
-TAG:^hide-accept-language\{block\}$
-
-#######################################################
-# Sections for hide-referrer{} to test:
-#
-# 1) conditional-block
-# 2) conditional-forge
-# 3) forge
-# 4) block
-# 5) a parameter that looks like a valid fake referrer 
-# 6) a parameter that looks like an invalid fake referrer
-#######################################################
-
-# Set Header    = Referer: http://www.example.org/foo 
-# Expect Header = REMOVAL
-#
-# Set Header    = Referer: http://p.p/foo
-# Expect Header = NO CHANGE
-#
-# Set Header    = Referer: p.p/
-# Expect Header = REMOVAL
-#
-# Set Header    = Referer: p
-# Expect Header = REMOVAL
-#
-# Set Header    = Referer: http://
-# Expect Header = REMOVAL
-#
-# Set Header    = Referer: https://p.p/
-# Expect Header = REMOVAL
-{+hide-referrer{conditional-block}}
-TAG:^hide-referrer\{conditional-block\}$
-
-# Set Header    = Referer: http://www.example.org/foo 
-# Expect Header = Referer: http://p.p/
-#
-# Set Header    = Referer: http://p.p/foo
-# Expect Header = NO CHANGE
-#
-# Set Header    = Referer: p.p/
-# Expect Header = Referer: http://p.p/
-#
-# Set Header    = Referer: p
-# Expect Header = Referer: http://p.p/
-#
-# Set Header    = Referer: http://
-# Expect Header = Referer: http://p.p/
-#
-# Set Header    = Referer: https://p.p/
-# Expect Header = Referer: http://p.p/
-{+hide-referrer{conditional-forge}}
-TAG:^hide-referrer\{conditional-forge\}$
-
-# Set Header    = Referer: http://www.example.org/foo 
-# Expect Header = Referer: http://p.p/
-{+hide-referrer{forge}}
-TAG:^hide-referrer\{forge\}$
-
-# Set Header    = Referer: http://www.example.org/foo 
-# Expect Header = REMOVAL
-{+hide-referrer{block}}
-TAG:^hide-referrer\{block\}$
-
-# Set Header    = Referer: http://www.example.org/foo 
-# Expect Header = Referer: invalid
-{+hide-referrer{invalid}}
-TAG:^hide-referrer\{invalid\}$
-
-# Set Header    = Referer: http://www.example.org/asdf
-# Expect Header = Referer: http://www.privoxy.org/
-{+hide-referrer{http://www.privoxy.org/}}
-TAG:^hide-referrer\{http://www.privoxy.org/\}$
-
-#{+hide-referrer{}}
-#TAG:^hide-referrer\{\}$
-
-#######################################################
-# Test hide-user-agent{}.
-#######################################################
-
-# Set Header    = User-Agent: Mozilla/5.0 (X11; U; NetBSD i386; de-CH; rv:1.8.1.6) Gecko/20070806 Firefox/2.0.0.6
-# Expect Header = User-Agent: Mozilla/5.0 (X11; U; FreeBSD alpha; en-GB; rv:1.8.1.6) Gecko/20070913 Firefox/2.0.0.6
-{+hide-user-agent{Mozilla/5.0 (X11; U; FreeBSD alpha; en-GB; rv:1.8.1.6) Gecko/20070913 Firefox/2.0.0.6}}
-TAG:^hide-user-agent\{Mozilla/5\.0 \(X11; U; FreeBSD alpha; en-GB; rv:1\.8\.1\.6\) Gecko/20070913 Firefox/2\.0\.0\.6\}$
-
-# XXX: Check the code that is tested here.
-# Set Header = ua-blah: blah
-# Expect Header = REMOVAL
-{+hide-user-agent{block}}
-TAG:^hide-user-agent{block}$
-
-# Set Header = ua-blah: blah
-# Expect Header = NO CHANGE
-{-hide-user-agent{}}
-TAG:^-hide-user-agent{block}$
-
-
-#######################################################
-# Test add-header{}.
-#######################################################
-
-# Set Header    = X-Whatever: foo
-# Expect Header = X-Custom-Header: yes, please
-
-{+add-header{X-Custom-Header: yes, please}}
-TAG:^add-header\{X-Custom-Header: yes, please\}$
-
-#######################################################
-# Test client-header-filter{hide-tor-exit-notation}.
-#######################################################
-
-# Set Header    = Referer: http://p.p.zwiebelsuppe.exit/
-# Expect Header = Referer: http://p.p/
-#
-# Set Header    = Referer: http://p.p.zwiebelsuppe.exit/foo/bar/baaz/
-# Expect Header = Referer: http://p.p/foo/bar/baaz/
-#
-# Set Header    = Referer: http://p.p/
-# Expect Header = NO CHANGE
-#
-# Set Header    = Referer: http://config.privoxy.org.zwiebelsuppe.exit/foo/bar/baaz.html
-# Expect Header = Referer: http://config.privoxy.org/foo/bar/baaz.html
-#
-# Set Header    = Host: p.p.zwiebelsuppe.exit
-# Expect Header = Host: p.p
-#
-# Set Header    = Host: p.p
-# Expect Header = NO CHANGE
-#
-# Set Header    = Referer: http://config.privoxy.org.ad356ef8e87a89e6c898b74500d58607ac691178.exit/foo/baaz.html
-# Expect Header = Referer: http://config.privoxy.org/foo/baaz.html
-
-{+client-header-filter{hide-tor-exit-notation} -hide-referer}
-TAG:^client-header-filter\{hide-tor-exit-notation\}$
-
-#######################################################
-# Test crunch-client-header{}.
-#######################################################
-
-# Set Header    = Content-Type: text/html
-# Expect Header = REMOVAL
-#
-# Set Header    = Content-Type: text/html; charset=4711
-# Expect Header = REMOVAL
-#
-# Set Header    = Content-Type: text/plain
-# Expect Header = NO CHANGE
-
-{+crunch-client-header{text/html}}
-TAG:^crunch-client-header\{text/plain\}$
-
-
-#######################################################
-# Test crunch-if-none-match.
-#######################################################
-
-# Set Header    = If-None-Match: 8987afd239d2093kd2309kd
-# Expect Header = REMOVAL
-
-# Set Header    = If-None-Match: 82c3cb50c984ef11b1fed749949b2a16
-# Expect Header = REMOVAL
-
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = NO CHANGE
-
-{+crunch-if-none-match -hide-if-modified-since}
-TAG:^crunch-if-none-match$
-
-#######################################################
-# Test hide-if-modified-since
-#######################################################
-
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = REMOVAL
-#
-# Set Header    = If-None-Match: 82c3cb50c984ef11b1fed749949b2a16
-# Expect Header = NO CHANGE
-
-{+hide-if-modified-since{block} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{block\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = SOME CHANGE
-
-{+hide-if-modified-since{-60} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{-60\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = SOME CHANGE
-
-{+hide-if-modified-since{+60} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{\+60\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = SOME CHANGE
-
-{+hide-if-modified-since{60} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{60\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = NO CHANGE
-
-{+hide-if-modified-since{+0} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{\+0\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = NO CHANGE
-
-{+hide-if-modified-since{-0} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{-0\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = NO CHANGE
-
-{+hide-if-modified-since{0} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{0\}$
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = REMOVAL
-# Set Header    = If-Modified-Since: Thu, 04 Oct 2007 09:56:35 GMT
-# Expect Header = NO CHANGE
-
-{+hide-if-modified-since{NaN} -crunch-if-none-match}
-TAG:^hide-if-modified-since\{NaN\}$
-
-
-#######################################################
-# Test crunch-outgoing-cookies
-#######################################################
-
-# Set Header    = If-Modified-Since: Gee, this date is invalid
-# Expect Header = NO CHANGE
-#
-# Set Header    = Cookie: PREF=ID=6cf0abd34262:TM=117335617:LM=1617:S=jZypyJ7LPiwFi1_
-# Expect Header = REMOVAL
-{\
- +crunch-outgoing-cookies \
- -crunch-incoming-cookies \
- -session-cookies-only    \
- -hide-if-modified-since  \
-}
-TAG:^crunch-outgoing-cookies$
-
-#######################################################
-# Test session-cookies-only
-#
-# XXX: pretty useless as session-cookies-only doesn't
-# affect client headers.
-#######################################################
-
-# Set Header    = Cookie: NSC_gffe-iuuq-mc-wtfswfs=8efb330d3660;expires=Thu, 04-Oct-07 19:11:34 GMT;path=/
-# Expect Header = NO CHANGE
-#
-# Set Header    = Cookie: PREF=ID=6cf0abd34262:TM=117335617:LM=1617:S=jZypyJ7LPiwFi1_
-# Expect Header = NO CHANGE
-{\
- -crunch-outgoing-cookies \
- -crunch-incoming-cookies \
- +session-cookies-only    \
- -hide-if-modified-since  \
-}
-TAG:^session-cookies-only$
-
-#######################################################
-# Test change-x-forwarded-for
-#######################################################
-
-# Set Header    = X-Forwarded-For: 10.0.0.1
-# Expect Header = NO CHANGE
-{\
- -change-x-forwarded-for \
-}
-TAG:^-change-x-forwarded-for$
-
-# Set Header    = X-Forwarded-For: 10.0.0.1
-# Expect Header = REMOVAL
-{\
- +change-x-forwarded-for{block} \
-}
-TAG:^change-x-forwarded-for\{block\}$
-
-# Set Header    = X-Forwarded-For: 10.0.0.1
-# Expect Header = SOME CHANGE
-{\
- +change-x-forwarded-for{add} \
-}
-TAG:^change-x-forwarded-for\{add\}$
-
-#######################################################
-# Test hide-from-header
-#######################################################
-
-# Set Header    = From: schneewitchen@xxxxxxxxxxx
-# Expect Header = REMOVAL
-{\
- +hide-from-header{block}\
-}
-TAG:^hide-from-header\{block\}$
-
-# Set Header    = From: schneewitchen@xxxxxxxxxxx
-# Expect Header = From: siebenzwerge@xxxxxxxxxxx
-{\
- +hide-from-header{siebenzwerge@xxxxxxxxxxx}\
-}
-TAG:^hide-from-header\{siebenzwerge@xxxxxxxxxxx\}$
-
-#######################################################
-# Test prevent-compression
-#######################################################
-
-# Set Header    = Accept-Encoding: gzip, deflate
-# Expect Header = REMOVAL
-#
-# Set Header    = Accept-Encoding: gzip
-# Expect Header = REMOVAL
-#
-# Set Header    = Accept-Encoding: deflate
-# Expect Header = REMOVAL
-{\
- +prevent-compression\
-}
-TAG:^prevent-compression$
-
-#######################################################
-# Test content filters which could cause problems with
-# range requests.
-#######################################################
-
-# Set Header    = Range: bytes=1234-5678
-# Expect Header = REMOVAL
-# Set Header    = If-Range: bytes=1234-5678
-# Expect Header = REMOVAL
-# Set Header    = Request-Range: bytes=1234-5678
-# Expect Header = REMOVAL
-{\
- +deanimate-gifs{last} \
- -filter \
-}
-TAG:^deanimate-gifs\{last\}$
-
-# Set Header    = Range: bytes=1234-5678
-# Expect Header = REMOVAL
-# Set Header    = If-Range: bytes=1234-5678
-# Expect Header = REMOVAL
-# Set Header    = Request-Range: bytes=1234-5678
-# Expect Header = REMOVAL
-{\
- -deanimate-gifs \
- +filter{banners-by-size} \
-}
-TAG:^filter\{banners-by-size\}$
-
-# Set Header    = Range: bytes=1234-5678
-# Expect Header = NO CHANGE
-# Set Header    = If-Range: bytes=1234-5678
-# Expect Header = NO CHANGE
-# Set Header    = Request-Range: bytes=1234-5678
-# Expect Header = NO CHANGE
-{\
- -deanimate-gifs \
- -filter \
-}
-TAG:^no-content-filter$
-
-# Set Header    = Connection: close
-# Expect Header = Connection: keep-alive
-# Level = 13
-# Set Header    = Connection: keep-alive
-# Expect Header = NO CHANGE
-# Level = 13
-# Set Header    = Connection:
-# Expect Header = Connection: keep-alive
-# Level = 13
-{}
-TAG:^Connection: keep-alive$
-
-# Set Header    = Connection: keep-alive
-# Expect Header = Connection: close
-# Level = 14
-# Set Header    = Connection:
-# Expect Header = Connection: close
-# Level = 14
-{}
-TAG:^Connection: close$
-
-# XXX: Removing a header by not specifying a value is
-# an inherited curl feature and could be viewed as a
-# bug as far as Privoxy-Regression-Test is concerned.
-#
-# Set Header    = Host:
-# Expect Header = Host: p.p
-{}
-TAG:^No Host header$
-
-# Set Header    = Host: whatever.example.org
-# Expect Header = NO CHANGE
-{}
-TAG:^Host header other than the target host$
-
-# XXX: check the RFC to use a real value
-# Set Header = Keep-Alive: Yes
-# Expect Header = REMOVAL
-{}
-TAG:^Keep-Alive header removal$
-
-# XXX: check the RFC to use a real value
-# Set Header = proxy-connection: keep-alive
-# Expect Header = REMOVAL
-{}
-TAG:^Proxy-Connection removal$
-
-# Set Header = Proxy-Connection: keep-alive
-# Expect Header = REMOVAL
-{}
-TAG:^Proxy-Connection removal$
-
-# These are somewhat redundant when testing with
-# GET requests, but I want to remember then when
-# TRACE requests are supported.
-#
-# Set Header = Max-Forwards: 0
-# Expect Header = NO CHANGE
-# Set Header = Max-Forwards: 1
-# Expect Header = NO CHANGE
-# Set Header = Max-Forwards: -1
-# Expect Header = NO CHANGE
-# Set Header = Max-Forwards: 3
-# Expect Header = NO CHANGE
-{}
-TAG:^Max-Forwards header without TRACE method$
-
-################################################################
-#
-# Fairly dumb tests for Privoxy CGI pages.
-#
-# These are mainly useful for checking for memory leaks
-# with Valgrind or whether or not the user manual is installed
-# correctly and are unlikely to actually detect any
-#
-# Note that if "Expect Status Code" is missing, 200 is implied.
-#
-################################################################
-
-# Fetch Test = http://p.p/
-# Will fail if compiled with FEATURE_GRACEFUL_TERMINATION
-# Fetch Test = http://p.p/die
-# Expect Status Code = 404
-# Fetch Test = http://p.p/show-status
-# Fetch Test = http://config.privoxy.org/show-status?file=actions&index=0
-# Fetch Test = http://config.privoxy.org/show-status?file=filter&index=0
-# XXX: for the invalid ones we probably shouldn't return status code 200.
-# Fetch Test = http://config.privoxy.org/show-status?file=actions&index=100
-# Fetch Test = http://config.privoxy.org/show-status?file=actions&index=NaN
-# Fetch Test = http://config.privoxy.org/show-status?file=actions
-# Fetch Test = http://config.privoxy.org/show-status?file=filter&index=100
-# Fetch Test = http://config.privoxy.org/show-status?file=filter&index=NaN
-# Fetch Test = http://config.privoxy.org/show-status?file=filter
-# Fetch Test = http://config.privoxy.org/show-status?file=invalid
-# Fetch Test = http://config.privoxy.org/show-status?file=trust
-# Fetch Test = http://p.p/show-version
-# Fetch Test = http://p.p/show-request
-# Fetch Test = http://p.p/show-url-info
-# Fetch Test = http://p.p/show-url-info?url=www.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=http:%2F%2Fwww.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=HTTp:%2F%2Fwww.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=https:%2F%2Fwww.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=HtTps:%2F%2Fwww.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=ftp:%2F%2Fwww.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=FTp:%2F%2Fwww.privoxy.org%2F
-# Fetch Test = http://p.p/show-url-info?url=
-# Fetch Test = http://p.p/show-url-info?url=%2F
-# Fetch Test = http://p.p/toggle
-# Fetch Test = http://p.p/edit-actions
-# Fetch Test = http://p.p/eaa
-# Fetch Test = http://p.p/eau
-# Fetch Test = http://p.p/ear
-# Fetch Test = http://p.p/eal
-# Fetch Test = http://p.p/eafu
-# Fetch Test = http://p.p/eas
-# Fetch Test = http://p.p/easa
-# Fetch Test = http://p.p/easr
-# Fetch Test = http://p.p/eass
-# Fetch Test = http://p.p/edit-actions-for-url
-# Fetch Test = http://p.p/edit-actions-list
-# Fetch Test = http://p.p/edit-actions-submit
-# Fetch Test = http://p.p/edit-actions-url
-# Fetch Test = http://p.p/edit-actions-url-form
-# Fetch Test = http://p.p/edit-actions-add-url
-# Fetch Test = http://p.p/edit-actions-add-url-form
-# Fetch Test = http://p.p/edit-actions-remove-url
-# Fetch Test = http://p.p/edit-actions-remove-url-form
-# Fetch Test = http://p.p/edit-actions-section-add
-# Fetch Test = http://p.p/edit-actions-section-remove
-# Fetch Test = http://p.p/edit-actions-section-swap
-# Fetch Test = http://p.p/error-favicon.ico
-# Fetch Test = http://p.p/favicon.ico
-# Fetch Test = http://p.p/robots.txt
-# Fetch Test = http://p.p/send-banner
-# Fetch Test = http://p.p/send-stylesheet
-# Fetch Test = http://p.p/t
-# Fetch Test = http://p.p/url-info-osd.xml
-
-# Trusted CGI Request = http://p.p/edit-actions
-# Expect Status Code = 302
-# Level = 12 # Depends on the CGI editor being enabled
-# Fetch Test = http://p.p/does-not-exist
-# Expect Status Code = 404
-# Trusted CGI Request = http://p.p/eaa
-# Trusted CGI Request = http://p.p/eau
-# Trusted CGI Request = http://p.p/ear
-# Trusted CGI Request = http://p.p/eal
-# Trusted CGI Request = http://p.p/eafu
-# Trusted CGI Request = http://p.p/eas
-# Trusted CGI Request = http://p.p/easa
-# Trusted CGI Request = http://p.p/easr
-# Trusted CGI Request = http://p.p/eass
-# Trusted CGI Request = http://p.p/edit-actions-for-url
-# Trusted CGI Request = http://p.p/edit-actions-list
-# Trusted CGI Request = http://p.p/edit-actions-submit
-# Trusted CGI Request = http://p.p/edit-actions-url
-# Trusted CGI Request = http://p.p/edit-actions-url-form
-# Trusted CGI Request = http://p.p/edit-actions-add-url
-# Trusted CGI Request = http://p.p/edit-actions-add-url-form
-# Trusted CGI Request = http://p.p/edit-actions-remove-url
-# Trusted CGI Request = http://p.p/edit-actions-remove-url-form
-# Trusted CGI Request = http://p.p/edit-actions-section-add
-# Trusted CGI Request = http://p.p/edit-actions-section-remove
-# Trusted CGI Request = http://p.p/edit-actions-section-swap
-# Trusted CGI Request = http://p.p/send-stylesheet
-
-# The following tests depend on Privoxy being configured to deliver the user manual
-
-# Fetch Test = http://p.p/user-manual
-# Expect Status Code = 302
-# Level = 9
-# Fetch Test = http://p.p/user-manual/
-# Level = 9
-# Fetch Test = http://p.p/user-manual/actions-file.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/appendix.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/config.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/configuration.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/contact.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/copyright.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/files-in-use.jpg
-# Level = 9
-# Fetch Test = http://p.p/user-manual/filter-file.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/index.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/installation.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/introduction.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/p_doc.css
-# Level = 9
-# Fetch Test = http://p.p/user-manual/proxy2.jpg
-# Level = 9
-# Fetch Test = http://p.p/user-manual/proxy_setup.jpg
-# Level = 9
-# Fetch Test = http://p.p/user-manual/quickstart.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/seealso.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/startup.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/templates.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/upgradersnote.html
-# Level = 9
-# Fetch Test = http://p.p/user-manual/whatsnew.html
-# Level = 9
-
-
-# Method Test = OPTIONS
-# Method Test = GET
-# Method Test = get
-# Method Test = gEt
-# Method Test = HEAD
-# Method Test = POST
-# Method Test = PUT
-# Method Test = DELETE
-# Method Test = OPTIONS
-# Method Test = TRACE
-# Method Test = CONNECT
-# Method Test = PROPFIND
-# Method Test = PROPPATCH
-# Method Test = MOVE
-# Method Test = COPY
-# Method Test = MKCOL
-# Method Test = LOCK
-# Method Test = UNLOCK
-# Method Test = BCOPY
-# Method Test = BMOVE
-# Method Test = BDELETE
-# Method Test = BPROPFIND
-# Method Test = BPROPPATCH
-# Method Test = SUBSCRIBE
-# Method Test = UNSUBSCRIBE
-# Method Test = NOTIFY
-# Method Test = POLL
-# Method Test = VERSION-CONTROL
-# Method Test = REPORT
-# Method Test = CHECKOUT
-# Method Test = CHECKIN
-# Method Test = UNCHECKOUT
-# Method Test = MKWORKSPACE
-# Method Test = UPDATE
-# Method Test = LABEL
-# Method Test = MERGE
-# Method Test = BASELINE-CONTROL
-# Method Test = MKACTIVITY
-# Method Test = PRIVOXY-REGRESSION-TEST-IN-THE-HOUSE
-# Expect Status Code = 400
-
-{+block{Forbidden Port. You are not supposed to see this.}}
-config.privoxy.org:1-/
-p.p:1-/
-
-{-block}
-config.privoxy.org:3,79-81/
-p.p:3,22,79-81/
-
-# Fetch Test = http://oh-dear-this-hostname-is-so-very-long-that-it-can-not-possibly-be-forwarded-through-socks5-as-a-result-we-therefore-expect-privoxy-to-return-an-error-response-instead-of-forwarding-the-request-because-as-already-mentioned-this-host-is-really-very-long.example
-# Expect Status Code = 503
-{+forward-override{forward-socks5 127.0.0.1:12345 .}}
-oh-dear-this-hostname-is-so-very-long-that-it-can-not-possibly-be-forwarded-through-socks5-as-a-result-we-therefore-expect-privoxy-to-return-an-error-response-instead-of-forwarding-the-request-because-as-already-mentioned-this-host-is-really-very-long.example/
-
-# Fetch Test = http://oh-dear-this-hostname-is-short-enough-but-there-is-no-socks-server-listening.example
-# Expect Status Code = 503
-{+forward-override{forward-socks5 127.0.0.1:12345 .}}
-oh-dear-this-hostname-is-short-enough-but-there-is-no-socks-server-listening.example
-
-# This one currently triggers the same error condition as the
-# test above (socks5 server unreachable), but once Privoxy
-# starts to properly reject invalid ports it should become useful.
-
-# Fetch Test = http://invalid-forward5-gateway-port.example
-# Expect Status Code = 503
-{+forward-override{forward-socks5 127.0.0.1:-1 127.0.0.1:12345}}
-invalid-forward5-gateway-port.example
-
-# Fetch Test = http://forward5-null-gateway-host.example
-# Expect Status Code = 503
-{+forward-override{forward-socks5 :12345 127.0.0.1:12345}}
-forward5-null-gateway-host.example
-
-# Fetch Test = http://www.forbidden-connect.example:444/
-# Method = CONNECT
-# Expect Status Code = 403
-{+limit-connect{443}}
-www.forbidden-connect.example/
-
-# Fetch Test = http://www.blocked-request.example/blocked-request
-# Expect Status Code = 403
-{+block{This request failed to make it to the target destination which means the test succeeded.}}
-www.blocked-request.example/blocked-request
-
-# Fetch Test = http://www.blocked-request.example/blocked-request-with-no-reason-specified
-# Expect Status Code = 403
-{+block}
-www.blocked-request.example/blocked-request-with-no-reason-specified
-
-# Some domain pattern tests
-#
-{+block{domain pattern test}}
-# Blocked URL = http://domain-pattern-test.example/
-# Blocked URL = http://domain-pattern-test.example.org/
-domain-pattern-test.example.
-
-# Just in case there is no white-space fuzzer in the house ...
-#
-# Set Header = X-LWS-Test: no superfluous white space here
-# Expect Header = NO CHANGE
-# Set Header = X-LWS-Test:  superfluous   white space  in  the   house
-# Expect Header = X-LWS-Test: superfluous white space in the house
-# Set Header = X-LWS-Test   :  superfluous   white   space   in   the    house
-# Expect Header = X-LWS-Test: superfluous white space in the house
-# Set Header = X-LWS-Test:  :superfluous white space in the house
-# Expect Header = X-LWS-Test: :superfluous white space in the house
-# Set Header = X-LWS-Test: :no superfluous white space here
-# Expect Header = NO CHANGE
-# Set Header = X-LWS-Test:	superfluous 		white 			tabs in the house
-# Expect Header = X-LWS-Test: superfluous white tabs in the house
-# Set Header = X-LWS-Test	:	superfluous 		white 			tabs in the house
-# Expect Header = X-LWS-Test: superfluous white tabs in the house
-# Set Header = X-LWS-Test: "leave  quoted  lws alone"
-# Expect Header = X-LWS-Test: "leave  quoted  lws alone"
-# Set Header = X-LWS-Test:  "leave  quoted  lws alone"  thxbye
-# Expect Header = X-LWS-Test: "leave  quoted  lws alone" thxbye
-# Set Header = X-LWS-Test: " Do I Look like	quoted  text? Me    thinks  not.
-# Expect Header = X-LWS-Test: " Do I Look like quoted text? Me thinks not.
-# Set Header = X-LWS-Test: "This  is  quoted" this  is  not "but   this  is  again"
-# Expect Header = X-LWS-Test: "This  is  quoted" this is not "but   this  is  again"
-# Set Header = X-LWS-Test:  "This  is  quoted" this   is  not "this  is  "  but  "  this again   is  not
-# Expect Header = X-LWS-Test: "This  is  quoted" this is not "this  is  " but " this again is not
-{}
-TAG:^LWS Tests$
diff --git a/external/privoxy/slackware/rc.privoxy.orig b/external/privoxy/slackware/rc.privoxy.orig
deleted file mode 100644
index cbd0db5..0000000
--- a/external/privoxy/slackware/rc.privoxy.orig
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/bin/sh
-#  ********************************************************************
-#  This script uses exit to return proper error codes,
-#  sourcing (. /path/to/rc.privoxy) it in your system's
-#  rc files is a bad idea.
-#  ********************************************************************
-
-RETVAL=1
-
-PRIVOXY_PRG="%PROGRAM%"
-PRIVOXY_BIN="%SBIN_DEST%/$PRIVOXY_PRG"
-PRIVOXY_CONF="%CONF_DEST%/config"
-PRIVOXY_USER="%USER%"
-PRIVOXY_GROUP="%GROUP%"
-PRIVOXY_PID="/var/run/$PRIVOXY_PRG.pid"
-
-declare -i check
-check=(`/bin/ps -e|/bin/grep $PRIVOXY_PRG|/usr/bin/wc -l`)
-
-# some checks for us
-if [ ! -x $PRIVOXY_BIN  ] ; then exit 0 ;fi
-if [ ! -f $PRIVOXY_CONF ] ; then exit 0 ;fi
-
-# See how we were called.
-
-PRIVOXY="$PRIVOXY_BIN --user $PRIVOXY_USER.$PRIVOXY_GROUP --pidfile $PRIVOXY_PID $PRIVOXY_CONF"
-
-start () {
-	# start daemon
-	echo -n $"Starting $PRIVOXY_PRG: "
-
-	if [ ! -f $PRIVOXY_PID ]; then
-		( $PRIVOXY 2>/dev/tty9 ) \
-			&& echo " OK" \
-			&& /bin/touch /var/lock/$PRIVOXY_PRG \
-			&& RETVAL=0
-	elif [ $check -lt 3 ]; then 
-	        echo "Zombie lock file found"
-	        /bin/rm -f /var/lock/$PRIVOXY_PRG $PRIVOXY_PID
-		echo "Retrying..."
-		start
-	else
-		echo "Already running"
-	fi
-	echo
-}
-
-stop () {
-	# stop daemon
-	echo -n $"Stopping $PRIVOXY_PRG: "
-	if [ -f $PRIVOXY_PID ]; then
-		/bin/kill `/bin/cat $PRIVOXY_PID` \
-			&& /bin/rm -f /var/lock/$PRIVOXY_PRG $PRIVOXY_PID \
-			&& echo " OK" \
-			&& RETVAL=0
-		echo
-	else
-		echo " Not Running"
-	fi
-}
-
-case "$1" in
-  start)
-	start	
-	;;
-  stop)
-	stop	
-	;;
-  reload)
-	if [ -f $PRIVOXY_PID ] ; then
-                /bin/kill -HUP `cat $PRIVOXY_PID` \
-			&& RETVAL=0
-        fi
-	;;
-  restart)
-	stop 
-	start
-	;;
-  kill)
-	echo "Kill all Privoxy"
-	/bin/rm -f /var/lock/$PRIVOXY_PRG $PRIVOXY_PID 
-	/bin/killall $PRIVOXY
-	;;
-  condrestart)
-	# restart only if already running
-	if [ -f $PRIVOXY_PID ] ; then
-		stop
-		start
-	fi 
-	;;
-  status)
-	/bin/ps ax|/bin/grep $PRIVOXY_PRG|/bin/grep -v 'grep\|init\.d\|rc\.d'
-	RETVAL=0
-	;;
-  top)
-	if [ -f $PRIVOXY_PID ]; then
-                a=""
-                for i in `/sbin/pidof $PRIVOXY_PRG` ; do
-                        a="$a -p $i"
-                done
-                /usr/bin/top $a
-        fi
-	;;
-  *)
-	echo $"Usage: $PRIVOXY_PRG {start|stop|reload|restart|condrestart|status|top|kill}"
-	exit 1
-esac
-
-exit $RETVAL
diff --git a/external/privoxy/ssplit.c b/external/privoxy/ssplit.c
deleted file mode 100644
index d916286..0000000
--- a/external/privoxy/ssplit.c
+++ /dev/null
@@ -1,218 +0,0 @@
-const char ssplit_rcs[] = "$Id: ssplit.c,v 1.9 2007/11/03 14:35:45 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/ssplit.c,v $
- *
- * Purpose     :  A function to split a string at specified delimiters.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: ssplit.c,v $
- *    Revision 1.9  2007/11/03 14:35:45  fabiankeil
- *    Fix spelling in Purpose line. Patch submitted by Simon Ruderich.
- *
- *    Revision 1.8  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.6  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.5  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.4  2001/11/13 00:16:38  jongfoster
- *    Replacing references to malloc.h with the standard stdlib.h
- *    (See ANSI or K&R 2nd Ed)
- *
- *    Revision 1.3  2001/05/29 08:54:25  jongfoster
- *    Rewrote the innards of ssplit() to be easier to understand,
- *    faster, and to use less memory.  Didn't change the interface
- *    except to give the parameters meaningful names.
- *
- *    Revision 1.2  2001/05/17 23:01:01  oes
- *     - Cleaned CRLF's from the sources and related files
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:04  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <string.h>
-#include <stdlib.h>
-
-#include "ssplit.h"
-#include "miscutil.h"
-
-const char ssplit_h_rcs[] = SSPLIT_H_VERSION;
-
-/* Define this for lots of debugging information to stdout */
-#undef SSPLIT_VERBOSE
-/* #define SSPLIT_VERBOSE 1 */
-
-
-/*********************************************************************
- *
- * Function    :  ssplit
- *
- * Description :  Split a string using delimiters in `delim'.  Results
- *                go into `vec'.
- *
- * Parameters  :
- *          1  :  str = string to split.  Will be split in place
- *                (i.e. do not free until you've finished with vec,
- *                previous contents will be trashed by the call).
- *          2  :  delim = array of delimiters (if NULL, uses " \t").
- *          3  :  vec[] = results vector (aka. array) [out]
- *          4  :  vec_len = number of usable slots in the vector (aka. array size)
- *          5  :  dont_save_empty_fields = zero if consecutive delimiters
- *                give a null output field(s), nonzero if they are just 
- *                to be considered as single delimeter
- *          6  :  ignore_leading = nonzero to ignore leading field
- *                separators.
- *
- * Returns     :  -1 => Error: vec_len is too small to hold all the 
- *                      data, or str == NULL.
- *                >=0 => the number of fields put in `vec'.
- *                On error, vec and str may still have been overwritten.
- *
- *********************************************************************/
-int ssplit(char *str, const char *delim, char *vec[], int vec_len, 
-           int dont_save_empty_fields, int ignore_leading)
-{
-   unsigned char is_delim[256];
-   unsigned char char_type;
-   int vec_count = 0;
-
-   if (!str)
-   {
-      return(-1);
-   }
-
-
-   /* Build is_delim array */
-
-   memset(is_delim, '\0', sizeof(is_delim));
-
-   if (!delim)
-   {
-      delim = " \t";  /* default field separators */
-   }
-
-   while (*delim)
-   {
-      is_delim[(unsigned)(unsigned char)*delim++] = 1;   /* separator  */
-   }
-
-   is_delim[(unsigned)(unsigned char)'\0'] = 2;   /* terminator */
-   is_delim[(unsigned)(unsigned char)'\n'] = 2;   /* terminator */
-
-
-   /* Parse string */
-
-   if (ignore_leading)
-   {
-      /* skip leading separators */
-      while (is_delim[(unsigned)(unsigned char)*str] == 1)
-      {
-         str++;
-      }
-   }
-
-   /* first pointer is the beginning of string */
-   /* Check if we want to save this field */
-   if ( (!dont_save_empty_fields)
-     || (is_delim[(unsigned)(unsigned char)*str] == 0) )
-      {
-      /*
-       * We want empty fields, or the first character in this 
-       * field is not a delimiter or the end of string.
-       * So save it.
-       */
-      if (vec_count >= vec_len)
-      {
-         return(-1); /* overflow */
-      }
-      vec[vec_count++] = (char *) str;   
-   }
-
-   while ((char_type = is_delim[(unsigned)(unsigned char)*str]) != 2)
-   {
-      if (char_type == 1)    
-      {
-         /* the char is a separator */
-
-         /* null terminate the substring */
-         *str++ = '\0';      
-
-         /* Check if we want to save this field */
-         if ( (!dont_save_empty_fields)
-           || (is_delim[(unsigned)(unsigned char)*str] == 0) )
-            {
-            /*
-             * We want empty fields, or the first character in this 
-             * field is not a delimiter or the end of string.
-             * So save it.
-             */
-            if (vec_count >= vec_len)
-            {
-               return(-1); /* overflow */
-            }
-            vec[vec_count++] = (char *) str;   
-         }
-      }
-      else
-      {
-         str++;
-      }
-   }
-   *str = '\0';     /* null terminate the substring */
-
-#ifdef SSPLIT_VERBOSE
-   {
-      int i;
-      printf("dump %d strings\n", vec_count);
-      for (i = 0; i < vec_count; i++)
-      {
-         printf("%d '%s'\n", i, vec[i]);
-      }
-   }
-#endif /* def SSPLIT_VERBOSE */
-
-   return(vec_count);
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/ssplit.h b/external/privoxy/ssplit.h
deleted file mode 100644
index 3e9b991..0000000
--- a/external/privoxy/ssplit.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef SSPLIT_H_INCLUDED
-#define SSPLIT_H_INCLUDED
-#define SSPLIT_H_VERSION "$Id: ssplit.h,v 1.7 2006/07/18 14:48:47 david__schmidt Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/ssplit.h,v $
- *
- * Purpose     :  A function to split a string at specified deliminters.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: ssplit.h,v $
- *    Revision 1.7  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.5  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.4  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.3  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.2  2001/05/29 08:54:25  jongfoster
- *    Rewrote the innards of ssplit() to be easier to understand,
- *    faster, and to use less memory.  Didn't change the interface
- *    except to give the parameters meaningful names.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:04  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern int ssplit(char *str, const char *delim, char *vec[], int vec_len, 
-                  int dont_save_empty_fields, int ignore_leading);
-
-/* Revision control strings from this header and associated .c file */
-extern const char ssplit_rcs[];
-extern const char ssplit_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef SSPLIT_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/strptime.h b/external/privoxy/strptime.h
deleted file mode 100644
index 63ffe57..0000000
--- a/external/privoxy/strptime.h
+++ /dev/null
@@ -1,1003 +0,0 @@
-/* Convert a string representation of time to a time value.
-   Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@xxxxxxxxxx>, 1996.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* XXX This version of the implementation is not really complete.
-   Some of the fields cannot add information alone.  But if seeing
-   some of them in the same format (such as year, week and weekday)
-   this is enough information for determining the date.  */
-
-#ifdef HAVE_CONFIG_H
-# include "config.h"
-#endif
-
-#include <ctype.h>
-#include <limits.h>
-#include <string.h>
-#include <time.h>
-
-#ifdef _LIBC
-# include "../locale/localeinfo.h"
-#endif
-
-
-#ifndef __P
-# if defined (__GNUC__) || (defined (__STDC__) && __STDC__)
-#  define __P(args) args
-# else
-#  define __P(args) ()
-# endif  /* GCC.  */
-#endif  /* Not __P.  */
-
-#if ! HAVE_LOCALTIME_R && ! defined localtime_r
-# ifdef _LIBC
-#  define localtime_r __localtime_r
-# else
-/* Approximate localtime_r as best we can in its absence.  */
-#  define localtime_r my_localtime_r
-static struct tm *localtime_r __P ((const time_t *, struct tm *));
-static struct tm *
-localtime_r (t, tp)
-     const time_t *t;
-     struct tm *tp;
-{
-  struct tm *l = localtime (t);
-  if (! l)
-    return 0;
-  *tp = *l;
-  return tp;
-}
-# endif /* ! _LIBC */
-#endif /* ! HAVE_LOCALTIME_R && ! defined (localtime_r) */
-
-
-#define match_char(ch1, ch2) if (ch1 != ch2) return NULL
-#if defined __GNUC__ && __GNUC__ >= 2
-# define match_string(cs1, s2) \
-  ({ size_t len = strlen (cs1);						      \
-     int result = strncasecmp ((cs1), (s2), len) == 0;			      \
-     if (result) (s2) += len;						      \
-     result; })
-#else
-/* Oh come on.  Get a reasonable compiler.  */
-# define match_string(cs1, s2) \
-  (strncasecmp ((cs1), (s2), strlen (cs1)) ? 0 : ((s2) += strlen (cs1), 1))
-#endif
-/* We intentionally do not use isdigit() for testing because this will
-   lead to problems with the wide character version.  */
-#define get_number(from, to, n) \
-  do {									      \
-    int __n = n;							      \
-    val = 0;								      \
-    while (*rp == ' ')							      \
-      ++rp;								      \
-    if (*rp < '0' || *rp > '9')						      \
-      return NULL;							      \
-    do {								      \
-      val *= 10;							      \
-      val += *rp++ - '0';						      \
-    } while (--__n > 0 && val * 10 <= to && *rp >= '0' && *rp <= '9');	      \
-    if (val < from || val > to)						      \
-      return NULL;							      \
-  } while (0)
-#ifdef _NL_CURRENT
-# define get_alt_number(from, to, n) \
-  ({									      \
-    __label__ do_normal;						      \
-    if (*decided != raw)						      \
-      {									      \
-	const char *alts = _NL_CURRENT (LC_TIME, ALT_DIGITS);		      \
-	int __n = n;							      \
-	int any = 0;							      \
-	while (*rp == ' ')						      \
-	  ++rp;								      \
-	val = 0;							      \
-	do {								      \
-	  val *= 10;							      \
-	  while (*alts != '\0')						      \
-	    {								      \
-	      size_t len = strlen (alts);				      \
-	      if (strncasecmp (alts, rp, len) == 0)			      \
-	        break;							      \
-	      alts += len + 1;						      \
-	      ++val;							      \
-	    }								      \
-	  if (*alts == '\0')						      \
-	    {								      \
-	      if (*decided == not && ! any)				      \
-		goto do_normal;						      \
-	      /* If we haven't read anything it's an error.  */		      \
-	      if (! any)						      \
-		return NULL;						      \
-	      /* Correct the premature multiplication.  */		      \
-	      val /= 10;						      \
-	      break;							      \
-	    }								      \
-	  else								      \
-	    *decided = loc;						      \
-	} while (--__n > 0 && val * 10 <= to);				      \
-	if (val < from || val > to)					      \
-	  return NULL;							      \
-      }									      \
-    else								      \
-      {									      \
-       do_normal:							      \
-        get_number (from, to, n);					      \
-      }									      \
-    0;									      \
-  })
-#else
-# define get_alt_number(from, to, n) \
-  /* We don't have the alternate representation.  */			      \
-  get_number(from, to, n)
-#endif
-#define recursive(new_fmt) \
-  (*(new_fmt) != '\0'							      \
-   && (rp = strptime_internal (rp, (new_fmt), tm, decided, era_cnt)) != NULL)
-
-
-#ifdef _LIBC
-/* This is defined in locale/C-time.c in the GNU libc.  */
-extern const struct locale_data _nl_C_LC_TIME;
-extern const unsigned short int __mon_yday[2][13];
-
-# define weekday_name (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (DAY_1)].string)
-# define ab_weekday_name \
-  (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (ABDAY_1)].string)
-# define month_name (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (MON_1)].string)
-# define ab_month_name (&_nl_C_LC_TIME.values[_NL_ITEM_INDEX (ABMON_1)].string)
-# define HERE_D_T_FMT (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (D_T_FMT)].string)
-# define HERE_D_FMT (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (D_FMT)].string)
-# define HERE_AM_STR (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (AM_STR)].string)
-# define HERE_PM_STR (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (PM_STR)].string)
-# define HERE_T_FMT_AMPM \
-  (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (T_FMT_AMPM)].string)
-# define HERE_T_FMT (_nl_C_LC_TIME.values[_NL_ITEM_INDEX (T_FMT)].string)
-
-# define strncasecmp(s1, s2, n) __strncasecmp (s1, s2, n)
-#else
-static char const weekday_name[][10] =
-  {
-    "Sunday", "Monday", "Tuesday", "Wednesday",
-    "Thursday", "Friday", "Saturday"
-  };
-static char const ab_weekday_name[][4] =
-  {
-    "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
-  };
-static char const month_name[][10] =
-  {
-    "January", "February", "March", "April", "May", "June",
-    "July", "August", "September", "October", "November", "December"
-  };
-static char const ab_month_name[][4] =
-  {
-    "Jan", "Feb", "Mar", "Apr", "May", "Jun",
-    "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"
-  };
-# define HERE_D_T_FMT "%a %b %e %H:%M:%S %Y"
-# define HERE_D_FMT "%m/%d/%y"
-# define HERE_AM_STR "AM"
-# define HERE_PM_STR "PM"
-# define HERE_T_FMT_AMPM "%I:%M:%S %p"
-# define HERE_T_FMT "%H:%M:%S"
-
-const unsigned short int __mon_yday[2][13] =
-  {
-    /* Normal years.  */
-    { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
-    /* Leap years.  */
-    { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
-  };
-#endif
-
-/* Status of lookup: do we use the locale data or the raw data?  */
-enum locale_status { not, loc, raw };
-
-
-#ifndef __isleap
-/* Nonzero if YEAR is a leap year (every 4 years,
-   except every 100th isn't, and every 400th is).  */
-# define __isleap(year)	\
-  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-#endif
-
-/* Compute the day of the week.  */
-static void
-day_of_the_week (struct tm *tm)
-{
-  /* We know that January 1st 1970 was a Thursday (= 4).  Compute the
-     the difference between this data in the one on TM and so determine
-     the weekday.  */
-  int corr_year = 1900 + tm->tm_year - (tm->tm_mon < 2);
-  int wday = (-473
-	      + (365 * (tm->tm_year - 70))
-	      + (corr_year / 4)
-	      - ((corr_year / 4) / 25) + ((corr_year / 4) % 25 < 0)
-	      + (((corr_year / 4) / 25) / 4)
-	      + __mon_yday[0][tm->tm_mon]
-	      + tm->tm_mday - 1);
-  tm->tm_wday = ((wday % 7) + 7) % 7;
-}
-
-/* Compute the day of the year.  */
-static void
-day_of_the_year (struct tm *tm)
-{
-  tm->tm_yday = (__mon_yday[__isleap (1900 + tm->tm_year)][tm->tm_mon]
-		 + (tm->tm_mday - 1));
-}
-
-static char *
-#ifdef _LIBC
-internal_function
-#endif
-strptime_internal __P ((const char *rp, const char *fmt, struct tm *tm,
-			enum locale_status *decided, int era_cnt));
-
-static char *
-#ifdef _LIBC
-internal_function
-#endif
-strptime_internal (rp, fmt, tm, decided, era_cnt)
-     const char *rp;
-     const char *fmt;
-     struct tm *tm;
-     enum locale_status *decided;
-     int era_cnt;
-{
-  const char *rp_backup;
-  int cnt;
-  size_t val;
-  int have_I, is_pm;
-  int century, want_century;
-  int want_era;
-  int have_wday, want_xday;
-  int have_yday;
-  int have_mon, have_mday;
-#ifdef _NL_CURRENT
-  size_t num_eras;
-#endif
-  struct era_entry *era;
-
-  have_I = is_pm = 0;
-  century = -1;
-  want_century = 0;
-  want_era = 0;
-  era = NULL;
-
-  have_wday = want_xday = have_yday = have_mon = have_mday = 0;
-
-  while (*fmt != '\0')
-    {
-      /* A white space in the format string matches 0 more or white
-	 space in the input string.  */
-      if (isspace (*fmt))
-	{
-	  while (isspace (*rp))
-	    ++rp;
-	  ++fmt;
-	  continue;
-	}
-
-      /* Any character but `%' must be matched by the same character
-	 in the iput string.  */
-      if (*fmt != '%')
-	{
-	  match_char (*fmt++, *rp++);
-	  continue;
-	}
-
-      ++fmt;
-#ifndef _NL_CURRENT
-      /* We need this for handling the `E' modifier.  */
-    start_over:
-#endif
-
-      /* Make back up of current processing pointer.  */
-      rp_backup = rp;
-
-      switch (*fmt++)
-	{
-	case '%':
-	  /* Match the `%' character itself.  */
-	  match_char ('%', *rp++);
-	  break;
-	case 'a':
-	case 'A':
-	  /* Match day of week.  */
-	  for (cnt = 0; cnt < 7; ++cnt)
-	    {
-#ifdef _NL_CURRENT
-	      if (*decided !=raw)
-		{
-		  if (match_string (_NL_CURRENT (LC_TIME, DAY_1 + cnt), rp))
-		    {
-		      if (*decided == not
-			  && strcmp (_NL_CURRENT (LC_TIME, DAY_1 + cnt),
-				     weekday_name[cnt]))
-			*decided = loc;
-		      break;
-		    }
-		  if (match_string (_NL_CURRENT (LC_TIME, ABDAY_1 + cnt), rp))
-		    {
-		      if (*decided == not
-			  && strcmp (_NL_CURRENT (LC_TIME, ABDAY_1 + cnt),
-				     ab_weekday_name[cnt]))
-			*decided = loc;
-		      break;
-		    }
-		}
-#endif
-	      if (*decided != loc
-		  && (match_string (weekday_name[cnt], rp)
-		      || match_string (ab_weekday_name[cnt], rp)))
-		{
-		  *decided = raw;
-		  break;
-		}
-	    }
-	  if (cnt == 7)
-	    /* Does not match a weekday name.  */
-	    return NULL;
-	  tm->tm_wday = cnt;
-	  have_wday = 1;
-	  break;
-	case 'b':
-	case 'B':
-	case 'h':
-	  /* Match month name.  */
-	  for (cnt = 0; cnt < 12; ++cnt)
-	    {
-#ifdef _NL_CURRENT
-	      if (*decided !=raw)
-		{
-		  if (match_string (_NL_CURRENT (LC_TIME, MON_1 + cnt), rp))
-		    {
-		      if (*decided == not
-			  && strcmp (_NL_CURRENT (LC_TIME, MON_1 + cnt),
-				     month_name[cnt]))
-			*decided = loc;
-		      break;
-		    }
-		  if (match_string (_NL_CURRENT (LC_TIME, ABMON_1 + cnt), rp))
-		    {
-		      if (*decided == not
-			  && strcmp (_NL_CURRENT (LC_TIME, ABMON_1 + cnt),
-				     ab_month_name[cnt]))
-			*decided = loc;
-		      break;
-		    }
-		}
-#endif
-	      if (match_string (month_name[cnt], rp)
-		  || match_string (ab_month_name[cnt], rp))
-		{
-		  *decided = raw;
-		  break;
-		}
-	    }
-	  if (cnt == 12)
-	    /* Does not match a month name.  */
-	    return NULL;
-	  tm->tm_mon = cnt;
-	  want_xday = 1;
-	  break;
-	case 'c':
-	  /* Match locale's date and time format.  */
-#ifdef _NL_CURRENT
-	  if (*decided != raw)
-	    {
-	      if (!recursive (_NL_CURRENT (LC_TIME, D_T_FMT)))
-		{
-		  if (*decided == loc)
-		    return NULL;
-		  else
-		    rp = rp_backup;
-		}
-	      else
-		{
-		  if (*decided == not &&
-		      strcmp (_NL_CURRENT (LC_TIME, D_T_FMT), HERE_D_T_FMT))
-		    *decided = loc;
-		  want_xday = 1;
-		  break;
-		}
-	      *decided = raw;
-	    }
-#endif
-	  if (!recursive (HERE_D_T_FMT))
-	    return NULL;
-	  want_xday = 1;
-	  break;
-	case 'C':
-	  /* Match century number.  */
-#ifdef _NL_CURRENT
-	match_century:
-#endif
-	  get_number (0, 99, 2);
-	  century = val;
-	  want_xday = 1;
-	  break;
-	case 'd':
-	case 'e':
-	  /* Match day of month.  */
-	  get_number (1, 31, 2);
-	  tm->tm_mday = val;
-	  have_mday = 1;
-	  want_xday = 1;
-	  break;
-	case 'F':
-	  if (!recursive ("%Y-%m-%d"))
-	    return NULL;
-	  want_xday = 1;
-	  break;
-	case 'x':
-#ifdef _NL_CURRENT
-	  if (*decided != raw)
-	    {
-	      if (!recursive (_NL_CURRENT (LC_TIME, D_FMT)))
-		{
-		  if (*decided == loc)
-		    return NULL;
-		  else
-		    rp = rp_backup;
-		}
-	      else
-		{
-		  if (*decided == not
-		      && strcmp (_NL_CURRENT (LC_TIME, D_FMT), HERE_D_FMT))
-		    *decided = loc;
-		  want_xday = 1;
-		  break;
-		}
-	      *decided = raw;
-	    }
-#endif
-	  /* Fall through.  */
-	case 'D':
-	  /* Match standard day format.  */
-	  if (!recursive (HERE_D_FMT))
-	    return NULL;
-	  want_xday = 1;
-	  break;
-	case 'k':
-	case 'H':
-	  /* Match hour in 24-hour clock.  */
-	  get_number (0, 23, 2);
-	  tm->tm_hour = val;
-	  have_I = 0;
-	  break;
-	case 'I':
-	  /* Match hour in 12-hour clock.  */
-	  get_number (1, 12, 2);
-	  tm->tm_hour = val % 12;
-	  have_I = 1;
-	  break;
-	case 'j':
-	  /* Match day number of year.  */
-	  get_number (1, 366, 3);
-	  tm->tm_yday = val - 1;
-	  have_yday = 1;
-	  break;
-	case 'm':
-	  /* Match number of month.  */
-	  get_number (1, 12, 2);
-	  tm->tm_mon = val - 1;
-	  have_mon = 1;
-	  want_xday = 1;
-	  break;
-	case 'M':
-	  /* Match minute.  */
-	  get_number (0, 59, 2);
-	  tm->tm_min = val;
-	  break;
-	case 'n':
-	case 't':
-	  /* Match any white space.  */
-	  while (isspace (*rp))
-	    ++rp;
-	  break;
-	case 'p':
-	  /* Match locale's equivalent of AM/PM.  */
-#ifdef _NL_CURRENT
-	  if (*decided != raw)
-	    {
-	      if (match_string (_NL_CURRENT (LC_TIME, AM_STR), rp))
-		{
-		  if (strcmp (_NL_CURRENT (LC_TIME, AM_STR), HERE_AM_STR))
-		    *decided = loc;
-		  break;
-		}
-	      if (match_string (_NL_CURRENT (LC_TIME, PM_STR), rp))
-		{
-		  if (strcmp (_NL_CURRENT (LC_TIME, PM_STR), HERE_PM_STR))
-		    *decided = loc;
-		  is_pm = 1;
-		  break;
-		}
-	      *decided = raw;
-	    }
-#endif
-	  if (!match_string (HERE_AM_STR, rp))
-	    if (match_string (HERE_PM_STR, rp))
-	      is_pm = 1;
-	    else
-	      return NULL;
-	  break;
-	case 'r':
-#ifdef _NL_CURRENT
-	  if (*decided != raw)
-	    {
-	      if (!recursive (_NL_CURRENT (LC_TIME, T_FMT_AMPM)))
-		{
-		  if (*decided == loc)
-		    return NULL;
-		  else
-		    rp = rp_backup;
-		}
-	      else
-		{
-		  if (*decided == not &&
-		      strcmp (_NL_CURRENT (LC_TIME, T_FMT_AMPM),
-			      HERE_T_FMT_AMPM))
-		    *decided = loc;
-		  break;
-		}
-	      *decided = raw;
-	    }
-#endif
-	  if (!recursive (HERE_T_FMT_AMPM))
-	    return NULL;
-	  break;
-	case 'R':
-	  if (!recursive ("%H:%M"))
-	    return NULL;
-	  break;
-	case 's':
-	  {
-	    /* The number of seconds may be very high so we cannot use
-	       the `get_number' macro.  Instead read the number
-	       character for character and construct the result while
-	       doing this.  */
-	    time_t secs = 0;
-	    if (*rp < '0' || *rp > '9')
-	      /* We need at least one digit.  */
-	      return NULL;
-
-	    do
-	      {
-		secs *= 10;
-		secs += *rp++ - '0';
-	      }
-	    while (*rp >= '0' && *rp <= '9');
-
-	    if (localtime_r (&secs, tm) == NULL)
-	      /* Error in function.  */
-	      return NULL;
-	  }
-	  break;
-	case 'S':
-	  get_number (0, 61, 2);
-	  tm->tm_sec = val;
-	  break;
-	case 'X':
-#ifdef _NL_CURRENT
-	  if (*decided != raw)
-	    {
-	      if (!recursive (_NL_CURRENT (LC_TIME, T_FMT)))
-		{
-		  if (*decided == loc)
-		    return NULL;
-		  else
-		    rp = rp_backup;
-		}
-	      else
-		{
-		  if (strcmp (_NL_CURRENT (LC_TIME, T_FMT), HERE_T_FMT))
-		    *decided = loc;
-		  break;
-		}
-	      *decided = raw;
-	    }
-#endif
-	  /* Fall through.  */
-	case 'T':
-	  if (!recursive (HERE_T_FMT))
-	    return NULL;
-	  break;
-	case 'u':
-	  get_number (1, 7, 1);
-	  tm->tm_wday = val % 7;
-	  have_wday = 1;
-	  break;
-	case 'g':
-	  get_number (0, 99, 2);
-	  /* XXX This cannot determine any field in TM.  */
-	  break;
-	case 'G':
-	  if (*rp < '0' || *rp > '9')
-	    return NULL;
-	  /* XXX Ignore the number since we would need some more
-	     information to compute a real date.  */
-	  do
-	    ++rp;
-	  while (*rp >= '0' && *rp <= '9');
-	  break;
-	case 'U':
-	case 'V':
-	case 'W':
-	  get_number (0, 53, 2);
-	  /* XXX This cannot determine any field in TM without some
-	     information.  */
-	  break;
-	case 'w':
-	  /* Match number of weekday.  */
-	  get_number (0, 6, 1);
-	  tm->tm_wday = val;
-	  have_wday = 1;
-	  break;
-	case 'y':
-#ifdef _NL_CURRENT
-	match_year_in_century:
-#endif
-	  /* Match year within century.  */
-	  get_number (0, 99, 2);
-	  /* The "Year 2000: The Millennium Rollover" paper suggests that
-	     values in the range 69-99 refer to the twentieth century.  */
-	  tm->tm_year = val >= 69 ? val : val + 100;
-	  /* Indicate that we want to use the century, if specified.  */
-	  want_century = 1;
-	  want_xday = 1;
-	  break;
-	case 'Y':
-	  /* Match year including century number.  */
-	  get_number (0, 9999, 4);
-	  tm->tm_year = val - 1900;
-	  want_century = 0;
-	  want_xday = 1;
-	  break;
-	case 'Z':
-	  /* XXX How to handle this?  */
-	  break;
-	case 'E':
-#ifdef _NL_CURRENT
-	  switch (*fmt++)
-	    {
-	    case 'c':
-	      /* Match locale's alternate date and time format.  */
-	      if (*decided != raw)
-		{
-		  const char *fmt = _NL_CURRENT (LC_TIME, ERA_D_T_FMT);
-
-		  if (*fmt == '\0')
-		    fmt = _NL_CURRENT (LC_TIME, D_T_FMT);
-
-		  if (!recursive (fmt))
-		    {
-		      if (*decided == loc)
-			return NULL;
-		      else
-			rp = rp_backup;
-		    }
-		  else
-		    {
-		      if (strcmp (fmt, HERE_D_T_FMT))
-			*decided = loc;
-		      want_xday = 1;
-		      break;
-		    }
-		  *decided = raw;
-		}
-	      /* The C locale has no era information, so use the
-		 normal representation.  */
-	      if (!recursive (HERE_D_T_FMT))
-		return NULL;
-	      want_xday = 1;
-	      break;
-	    case 'C':
-	      if (*decided != raw)
-		{
-		  if (era_cnt >= 0)
-		    {
-		      era = _nl_select_era_entry (era_cnt);
-		      if (match_string (era->era_name, rp))
-			{
-			  *decided = loc;
-			  break;
-			}
-		      else
-			return NULL;
-		    }
-		  else
-		    {
-		      num_eras = _NL_CURRENT_WORD (LC_TIME,
-						   _NL_TIME_ERA_NUM_ENTRIES);
-		      for (era_cnt = 0; era_cnt < (int) num_eras;
-			   ++era_cnt, rp = rp_backup)
-			{
-			  era = _nl_select_era_entry (era_cnt);
-			  if (match_string (era->era_name, rp))
-			    {
-			      *decided = loc;
-			      break;
-			    }
-			}
-		      if (era_cnt == (int) num_eras)
-			{
-			  era_cnt = -1;
-			  if (*decided == loc)
-			    return NULL;
-			}
-		      else
-			break;
-		    }
-
-		  *decided = raw;
-		}
-	      /* The C locale has no era information, so use the
-		 normal representation.  */
-	      goto match_century;
- 	    case 'y':
-	      if (*decided == raw)
-		goto match_year_in_century;
-
-	      get_number(0, 9999, 4);
-	      tm->tm_year = val;
-	      want_era = 1;
-	      want_xday = 1;
-	      break;
-	    case 'Y':
-	      if (*decided != raw)
-		{
-		  num_eras = _NL_CURRENT_WORD (LC_TIME,
-					       _NL_TIME_ERA_NUM_ENTRIES);
-		  for (era_cnt = 0; era_cnt < (int) num_eras;
-		       ++era_cnt, rp = rp_backup)
-		    {
-		      era = _nl_select_era_entry (era_cnt);
-		      if (recursive (era->era_format))
-			break;
-		    }
-		  if (era_cnt == (int) num_eras)
-		    {
-		      era_cnt = -1;
-		      if (*decided == loc)
-			return NULL;
-		      else
-			rp = rp_backup;
-		    }
-		  else
-		    {
-		      *decided = loc;
-		      era_cnt = -1;
-		      break;
-		    }
-
-		  *decided = raw;
-		}
-	      get_number (0, 9999, 4);
-	      tm->tm_year = val - 1900;
-	      want_century = 0;
-	      want_xday = 1;
-	      break;
-	    case 'x':
-	      if (*decided != raw)
-		{
-		  const char *fmt = _NL_CURRENT (LC_TIME, ERA_D_FMT);
-
-		  if (*fmt == '\0')
-		    fmt = _NL_CURRENT (LC_TIME, D_FMT);
-
-		  if (!recursive (fmt))
-		    {
-		      if (*decided == loc)
-			return NULL;
-		      else
-			rp = rp_backup;
-		    }
-		  else
-		    {
-		      if (strcmp (fmt, HERE_D_FMT))
-			*decided = loc;
-		      break;
-		    }
-		  *decided = raw;
-		}
-	      if (!recursive (HERE_D_FMT))
-		return NULL;
-	      break;
-	    case 'X':
-	      if (*decided != raw)
-		{
-		  const char *fmt = _NL_CURRENT (LC_TIME, ERA_T_FMT);
-
-		  if (*fmt == '\0')
-		    fmt = _NL_CURRENT (LC_TIME, T_FMT);
-
-		  if (!recursive (fmt))
-		    {
-		      if (*decided == loc)
-			return NULL;
-		      else
-			rp = rp_backup;
-		    }
-		  else
-		    {
-		      if (strcmp (fmt, HERE_T_FMT))
-			*decided = loc;
-		      break;
-		    }
-		  *decided = raw;
-		}
-	      if (!recursive (HERE_T_FMT))
-		return NULL;
-	      break;
-	    default:
-	      return NULL;
-	    }
-	  break;
-#else
-	  /* We have no information about the era format.  Just use
-	     the normal format.  */
-	  if (*fmt != 'c' && *fmt != 'C' && *fmt != 'y' && *fmt != 'Y'
-	      && *fmt != 'x' && *fmt != 'X')
-	    /* This is an illegal format.  */
-	    return NULL;
-
-	  goto start_over;
-#endif
-	case 'O':
-	  switch (*fmt++)
-	    {
-	    case 'd':
-	    case 'e':
-	      /* Match day of month using alternate numeric symbols.  */
-	      get_alt_number (1, 31, 2);
-	      tm->tm_mday = val;
-	      have_mday = 1;
-	      want_xday = 1;
-	      break;
-	    case 'H':
-	      /* Match hour in 24-hour clock using alternate numeric
-		 symbols.  */
-	      get_alt_number (0, 23, 2);
-	      tm->tm_hour = val;
-	      have_I = 0;
-	      break;
-	    case 'I':
-	      /* Match hour in 12-hour clock using alternate numeric
-		 symbols.  */
-	      get_alt_number (1, 12, 2);
-	      tm->tm_hour = val - 1;
-	      have_I = 1;
-	      break;
-	    case 'm':
-	      /* Match month using alternate numeric symbols.  */
-	      get_alt_number (1, 12, 2);
-	      tm->tm_mon = val - 1;
-	      have_mon = 1;
-	      want_xday = 1;
-	      break;
-	    case 'M':
-	      /* Match minutes using alternate numeric symbols.  */
-	      get_alt_number (0, 59, 2);
-	      tm->tm_min = val;
-	      break;
-	    case 'S':
-	      /* Match seconds using alternate numeric symbols.  */
-	      get_alt_number (0, 61, 2);
-	      tm->tm_sec = val;
-	      break;
-	    case 'U':
-	    case 'V':
-	    case 'W':
-	      get_alt_number (0, 53, 2);
-	      /* XXX This cannot determine any field in TM without
-		 further information.  */
-	      break;
-	    case 'w':
-	      /* Match number of weekday using alternate numeric symbols.  */
-	      get_alt_number (0, 6, 1);
-	      tm->tm_wday = val;
-	      have_wday = 1;
-	      break;
-	    case 'y':
-	      /* Match year within century using alternate numeric symbols.  */
-	      get_alt_number (0, 99, 2);
-	      tm->tm_year = val >= 69 ? val : val + 100;
-	      want_xday = 1;
-	      break;
-	    default:
-	      return NULL;
-	    }
-	  break;
-	default:
-	  return NULL;
-	}
-    }
-
-  if (have_I && is_pm)
-    tm->tm_hour += 12;
-
-  if (century != -1)
-    {
-      if (want_century)
-	tm->tm_year = tm->tm_year % 100 + (century - 19) * 100;
-      else
-	/* Only the century, but not the year.  Strange, but so be it.  */
-	tm->tm_year = (century - 19) * 100;
-    }
-
-#ifdef _NL_CURRENT
-  if (era_cnt != -1)
-    {
-      era = _nl_select_era_entry(era_cnt);
-      if (want_era)
-	tm->tm_year = (era->start_date[0]
-		       + ((tm->tm_year - era->offset)
-			  * era->absolute_direction));
-      else
-	/* Era start year assumed.  */
-	tm->tm_year = era->start_date[0];
-    }
-  else
-#endif
-    if (want_era)
-      return NULL;
-
-  if (want_xday && !have_wday)
-    {
-      if ( !(have_mon && have_mday) && have_yday)
-	{
-	  /* We don't have tm_mon and/or tm_mday, compute them.  */
-	  int t_mon = 0;
-	  while (__mon_yday[__isleap(1900 + tm->tm_year)][t_mon] <= tm->tm_yday)
-	      t_mon++;
-	  if (!have_mon)
-	      tm->tm_mon = t_mon - 1;
-	  if (!have_mday)
-	      tm->tm_mday =
-		(tm->tm_yday
-		 - __mon_yday[__isleap(1900 + tm->tm_year)][t_mon - 1] + 1);
-	}
-      day_of_the_week (tm);
-    }
-  if (want_xday && !have_yday)
-    day_of_the_year (tm);
-
-  return (char *) rp;
-}
-
-
-char *
-strptime (buf, format, tm)
-     const char *buf;
-     const char *format;
-     struct tm *tm;
-{
-  enum locale_status decided;
-
-#ifdef _NL_CURRENT
-  decided = not;
-#else
-  decided = raw;
-#endif
-  return strptime_internal (buf, format, tm, &decided, -1);
-}
diff --git a/external/privoxy/templates/blocked b/external/privoxy/templates/blocked
deleted file mode 100644
index 3ebc22e..0000000
--- a/external/privoxy/templates/blocked
+++ /dev/null
@@ -1,287 +0,0 @@
-##########################################################
-#
-# "Blocked" Error Output template for Privoxy.
-#
-#  NOTE: UNLIKE THE OTHER TEMPLATES, THIS ONE USES
-#  JavaScript write() TO GENERATE THE PAGE IN JS_AWARE
-#  BROWSERS. SYMBOL SUBSTITUTIONS THAT RESULT IN MULTILINE
-#  STRINGS WILL BREAK THE JavaScript SYNTAX.
-#  USE WITH CAUTION.
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written in plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  protocol:
-#    The request's protocol: http:// or https://
-#  hostport:
-#    The host and port part of the blocked request's URL.
-#  path:
-#    The path part of the blocked request's URL.
-#  path-ue:
-#    The path part of the blocked request's URL, url-encoded.
-#
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    This is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  force-support:
-#    Privoxy has been compiled with support for forced loading
-#    of blocked content. In that case, the symbol "force-prefix" is
-#    avaiable, which translates to the FORCE_PREFIX  
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
- <head>
-  <title>Request blocked (Privoxy@@my-hostname@)</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx" type="image/x-icon">
-  <style type="text/css">
-#include cgi-style.css
-  </style>
-  <script type="text/javascript" language="javascript">
-  <!--
-    /*
-     * Is this window or frame too small
-     * for the full-blown "blocked" page?
-     */
-    function isSmallFrame()
-    {
-       minWidth  = 650;
-       minHeight = 330;
-
-       /* 
-        * Navigator, Mozilla, Opera
-        */
-       if (window.innerWidth 
-           && (window.innerWidth >= minWidth) 
-           && (window.innerHeight >= minHeight))
-       {
-          return false;
-       }
- 
-       /* 
-        * MSIE
-        */
-       else if (document.body && document.body.clientWidth 
-                && (document.body.clientWidth >= minWidth)
-                && (document.body.clientHeight >= minHeight))
-       {
-          return false;
-       }
-
-       /*
-        * Small window or unsupported browser
-        */
-       return true;
-   }
-  //-->
-  </script>
- </head>
- <body>
-  <script type="text/javascript" language="javascript">
-  <!--
-#   Note: The same small version is used at the bottom
-#         of this file in the <noscript> context. If you
-#         make changes here, keep the other version in sync!
-
-  if (isSmallFrame())
-  {
-     document.write('\
-   <p class="small" align="center"> \
-    Request blocked by <a href="@default-cgi@" target="_blank">Privoxy</a>: @block-reason@ \
-    <br>See <a href="@default-cgi@show-url-info?url=@hostport@@path-ue@" \
-     target="_blank">why this block applies</a> \
-    <!-- @if-force-support-start --> \
-    or <a href="http://@hostport@@force-prefix@@path@";>go \
-    <!-- if-force-support-end@ --> \
-    to <b>@protocol@@hostport@@path@</b> \
-    <!-- @if-force-support-start --> \
-    anyway</a>. \
-    <!-- if-force-support-end@ --> \
-   </p> \
-   ');
-
-  }
-  else
-  {
-     document.write('\
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">\
-    <tr> \
-      <td class="status"> \
-        BLOCKED \
-      </td> \
-      <td class="title" width=100%> \
-         <h1> \
-          This is <a href="@homepage@">Privoxy</a> @version@ on @my-hostname@ (@my-ip-address@), port @my-port@, \
-          @if-enabled-display-then@enabled@else-not-enabled-display@disabled@endif-enabled-display@ \
-        </h1> \
-      </td> \
-    </tr> \
- \
-<!-- @if-unstable-start --> \
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in \
-    <tr> \
-      <td class="warning" colspan="2"> \
-        <h2>Warning:</h2> \
-        <p> \
-          <b>Please note that this <font color=red>@code-status@</font> release \
-          of the proxy software is not intended for production systems! \
-          <br>Use at your own risk. See the <a href="http://www.gnu.org/copyleft/gpl.html";>license</a> for details.</b> \
-        </p> \
-      </td> \
-    </tr> \
-<!-- if-unstable-end@ --> \
- \
-    <tr> \
-      <td class="box" colspan="2"> \
-        <h2>Request for blocked URL</h2> \
-        <p>Your request for <b>@protocol@@hostport@@path@</b> was blocked. \
-         <br>Block reason: @block-reason@ \
-         <br><a href="@default-cgi@show-url-info?url=@hostport@@path-ue@" \
-         target="_blank">See why this block applies</a> \
-<!-- @if-force-support-start --> \
-          or <a href="http://@hostport@@force-prefix@@path@";>go there anyway</a>. \
-<!-- if-force-support-end@ --> \
-        </p> \
-      </td> \
-    </tr> \
- \
-    <tr> \
-      <td class="box" colspan="2"> \
-        <h2>More Privoxy:</h2> \
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul> \
-      </td> \
-    </tr> \
- \
-    <tr> \
-      <td class="info" colspan="2"> \
-        <big><b>Support and Service via Sourceforge:</b></big> \
-        <p> \
-          We value your feedback. To provide you with the best support, \
-          we ask that you: \
-        </p> \
-        <ul> \
-          <li> \
-            use the <a href="http://sourceforge.net/tracker/?group_id=11118&amp;atid=211118";>support forum</a> or (better) the \
-            <a href="http://sourceforge.net/mail/?group_id=11118";>mailing lists</a> to get help. \
-          </li> \
-          <li> \
-            submit banners and all problems with the actions file only through the \
-            <a href="javascript:void(window.open(\'http://www.privoxy.org/actions\',\'Feedback\',\'width=600,scrollbars=yes,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no\').focus());">actions \
-            file feedback system</a>. \
-          </li> \
-          <li> \
-            submit bugs only through our <a href="http://sourceforge.net/tracker/?group_id=11118&amp;atid=111118";>bug tracker</a>. \
-            Make sure that the bug has not yet been submitted. \
-          </li> \
-          <li> \
-            submit feature requests only through our <a href="http://sourceforge.net/tracker/?atid=361118&amp;group_id=11118&amp;func=browse";>feature \
-            request tracker</a>. \
-          </li> \
-        </ul> \
-      </td> \
-    </tr> \
- \
-<!-- @if-have-help-info-start --> \
-    <tr> \
-      <td class="info" colspan="2"> \
-        <h2>Local Privoxy support:</h2> \
- \
-<!-- @if-have-proxy-info-start --> \
-        <p>You can consult the <a href="@proxy-info-url@">online documentation</a> for more information about this Privoxy installation.</p> \
-<!-- if-have-proxy-info-end@ --> \
- \
-<!-- @if-have-adminaddr-info-start --> \
-        <p>Address e-mail questions about this service to \
-          <a href="mailto:@admin-address@";><code>@admin-address@</code></a>, \
-          who will be glad to help you. \
-        </p> \
-<!-- if-have-adminaddr-info-end@ --> \
-      </td> \
-    </tr> \
-<!-- if-have-help-info-end@ --> \
- \
-  </table> \
-     ');
-  }
-  //-->
-  </script>
-
-#   Note: The same small version is used above via JavaScript
-#         If you make changes here, keep the other version in sync!
-
-  <noscript>
-   <p class="small" align="center">
-    Request blocked by <a href="@default-cgi@" target="_blank">Privoxy</a>: @block-reason@
-    <br>See <a href="@default-cgi@show-url-info?url=@hostport@@path-ue@"
-     target="_blank">why this block applies</a>
-    <!-- @if-force-support-start -->
-    or <a href="http://@hostport@@force-prefix@@path@";>go
-    <!-- if-force-support-end@ -->
-    to <b>@protocol@@hostport@@path@</b>
-    <!-- @if-force-support-start -->
-    anyway</a>.
-    <!-- if-force-support-end@ -->
-   </p>
-  </noscript>
-
- </body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-404 b/external/privoxy/templates/cgi-error-404
deleted file mode 100644
index c12b564..0000000
--- a/external/privoxy/templates/cgi-error-404
+++ /dev/null
@@ -1,149 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>404 - Privoxy Configuration Page not found</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="status">
-        404
-      </td>     
-      <td class="title" style="width: 100%">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning" colspan="2">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning" colspan="2">
-        <h2>Privoxy Configuration page not found</h2>
-            <p>You typed in what looks like a URL used to configure
-               Privoxy, but it cannot be recognised.  Maybe it's
-               for a different Privoxy version, or you typed it
-               in wrong?  Or maybe the Privoxy administrator
-               has decided to disable the feature.</p>
-            <p>If you got here by clicking a link in the
-               configuration interface, please file a bug report!</p>
-            <p>You can use the menu below to select from the available
-               configuration options</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box" colspan="2">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-        
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-bad-param b/external/privoxy/templates/cgi-error-bad-param
deleted file mode 100644
index a1e3f05..0000000
--- a/external/privoxy/templates/cgi-error-bad-param
+++ /dev/null
@@ -1,156 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy: Bad parameter</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning">
-        <h2>Bad parameter to Privoxy configuration page</h2>
-        <p>You've found a page used to configure Privoxy, but the
-           parameters (the part of the web page address after the
-           "?" mark) are wrong or missing.</p>
-        <p>Possible causes:</p>
-        <ul>
-          <li>If you just typed a URL pattern into a form, then you got
-             something wrong.  Press the "back" button on your browser
-             once and correct what you typed.</li>
-          <li>If you tried to type in the URL, then you've found a
-             page where you can't do that.  You can only view this
-             page by following links from elsewhere in the configuration
-             interface.</li>
-          <li>If you got here using your browser's "back" button, then
-             that is deliberately disabled for this page.</li>
-          <li>If you got here by clicking a link in the
-             configuration interface, please file a bug report!</li>
-        </ul>
-        <p>You can use the menu below to select from the available
-           configuration options</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>Privoxy Menu:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-    
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-disabled b/external/privoxy/templates/cgi-error-disabled
deleted file mode 100644
index 9faffc6..0000000
--- a/external/privoxy/templates/cgi-error-disabled
+++ /dev/null
@@ -1,169 +0,0 @@
-##########################################################
-#
-# Feature disabled or referrer untrusted Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Configuration Page Disabled</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning">
-        <h2>Privoxy Configuration access denied</h2>
-          <p>Access to <b>@url@</b> has been denied because:</p>
-
-          <ul>
-            <li>it requires a feature that has been disabled by the Privoxy administrator,</li>
-            <li>you didn't come here through one of Privoxy's CGI pages, or</li>
-            <li>the <q>Referer:</q> header is blocked.</li>
-          </ul>
-
-          <p>Note that the following features which used to be enabled in earlier
-             releases are now off by default:
-          </p>
-          <ul>
-           <li><a href="@user-manual@xxxxxxxxxxx#ENABLE-EDIT-ACTIONS">enable-edit-actions</a></li>
-           <li><a href="@user-manual@xxxxxxxxxxx#ENABLE-REMOTE-TOGGLE">enable-remote-toggle</a></li>
-           <li><a href="@user-manual@xxxxxxxxxxx#ENABLE-REMOTE-HTTP-TOGGLE">enable-remote-http-toggle</a>
-           (Most likely you don't need this anyway.)</li>
-          </ul>
-
-          <p>Please refer to the documentation behind the links to learn how to
-             enable them again and what the consequences are.</p>
-
-          <p>All enabled features are accessible from the
-             <a href="@default-cgi@">main menu</a>, some of them
-             are <em>protected</em> with a referrer check though.
-             If you got caught by the referrer check, but are <strong>absolutely</strong> sure
-             you know what you are doing, please <a title="Retry from a trusted referrer"
-              href="@url@">try again</a>.</p>
-
-          <p>If the <q>Referer:</q> header is blocked, you'll have to make an exception for
-             Privoxy's web interface first. Note that <em>dumb</em> referrer blocking
-             is a bad idea anyway, as it makes it easier to fingerprint your
-             requests. Consider using Privoxy's conditional referrer block instead.</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-    
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-file b/external/privoxy/templates/cgi-error-file
deleted file mode 100644
index 09bf2cb..0000000
--- a/external/privoxy/templates/cgi-error-file
+++ /dev/null
@@ -1,139 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy: Actions file not found</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning">
-        <h2>Actions file not found</h2>
-        <p>The actions file you are trying to edit (index <code>@f@</code>)
-           does not exist, or cannot be read.</p>
-      </td>
-    </tr>
-
-     <tr>
-      <td class="box">
-        <h2>Privoxy Menu:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-file-read-only b/external/privoxy/templates/cgi-error-file-read-only
deleted file mode 100644
index bfce277..0000000
--- a/external/privoxy/templates/cgi-error-file-read-only
+++ /dev/null
@@ -1,146 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy: Cannot write to actions file</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning">
-        <h2>Cannot write to actions file</h2>
-        <p>The actions file you are trying to edit (<code>@f@.action</code>)
-           could not be written to.</p>
-        <p>You many not have permission to write to the file - check the file
-           permissions.  On Windows, right-click the file, choose Properties,
-           and make sure it is not read-only.</p>
-        <p>Another reason you may see this message is if you have run out of
-           disk space.  If that is the case, then the actions file has been
-           truncated - if you get further errors, you may need to fix it
-           using a text editor.</p>
-      </td>
-    </tr>
-
-     <tr>
-      <td class="box">
-        <h2>Privoxy Menu:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-modified b/external/privoxy/templates/cgi-error-modified
deleted file mode 100644
index 3b04b4b..0000000
--- a/external/privoxy/templates/cgi-error-modified
+++ /dev/null
@@ -1,157 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy: URL out of date</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning">
-        <h2>URL out of date - file has changed since it was generated</h2>
-        <p>The URL you're viewing is out of date.  To prevent possible
-           damage to your configuration file, this action has been ignored.
-        </p>
-        <p>Possible causes:</p>
-        <ul>
-          <li>If you got here using your browser's "back" button, then
-             that is deliberately disabled for this page.  Please 
-             navigate around the configuration editor using the
-             links provided.</li>
-          <li>Perhaps you've got more than one browser window open, and
-             you're trying to change the same file in both?  You can
-             only have one editor window open at a time.  Your other edit
-             window should continue to function.</li>
-          <li>You may have modified the file some other way - perhaps by
-             editing it with a text editor.  Simply go back in to the 
-             configuration interface using the links below.</li>
-        </ul>
-        <p>You can go back into the edit interface using the menu below,
-           or by clicking <a href="edit-actions-list?f=@f@">here</a>.
-        </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-        
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-error-parse b/external/privoxy/templates/cgi-error-parse
deleted file mode 100644
index 695131c..0000000
--- a/external/privoxy/templates/cgi-error-parse
+++ /dev/null
@@ -1,176 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy: Parse error</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning">
-        <h2>Parse error</h2>
-         <p>The file you're trying to edit is not valid.  You need to fix
-           it using a text editor before you can edit it using the
-           web-based editor.</p>
-        <p>This error should only occur if you edited the file using a text
-           editor.  If you managed to take a valid file and break it this
-           badly using the web-based editor, please file a bug report!</p>
-        <p>When you've fixed the problem, you can go back into the edit
-           interface using the menu below, or by clicking <a 
-           href="edit-actions-list?f=@f@">here</a>.
-        </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>Problem description:</h2>
-        <p>@parse-error@</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>The line which caused the problem:</h2>
-        <pre>@line-raw@</pre>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>The line which caused the problem, with comments removed</h2>
-        <p><code>@line-data@</code></p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>Note</h2>
-        <p>Only the first error is reported - the file may contain other
-           errors, as well as the one reported above.</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-    
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/cgi-style.css b/external/privoxy/templates/cgi-style.css
deleted file mode 100644
index b66c580..0000000
--- a/external/privoxy/templates/cgi-style.css
+++ /dev/null
@@ -1,173 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/cgi-style.css,v $
-#
-# Purpose     :  Style sheet for the web-based config interface.
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: cgi-style.css,v $
-#    Revision 1.12  2007/12/11 21:20:53  fabiankeil
-#    Make strong warnings red too.
-#
-#    Revision 1.11  2007/12/08 14:29:06  fabiankeil
-#    Use CSS to let the URL and pattern input fields scale with
-#    the browser width and try to prevent vertical scroll bars
-#    if the width is less than 80 characters. Closes #1843596,
-#    thanks to Gerry Murphy and Lee.
-#
-#    Revision 1.10  2007/01/22 13:12:43  fabiankeil
-#    White space cosmetics for #include.
-#
-#    Revision 1.9  2006/12/17 17:50:55  fabiankeil
-#    Add white space workaround for tables
-#    in show-status CGI page.
-#
-#    Revision 1.8  2002/05/12 15:53:41  jongfoster
-#    Adding standard comment header with license and CVS log.
-#
-#
-##############################################################################
-
-/*
- * CSS for Privoxy CGI and script output
- *
- * $Id: cgi-style.css,v 1.12 2007/12/11 21:20:53 fabiankeil Exp $
- */
-
-/*
- * General rules: Font, Color, Headings, Margins, Links
- */
-body,td,th { font-family: arial, helvetica, helv, sans-serif; }
-body { background-color: #ffffff; color: #000000; }
-
-h1 { font-size: 140%; margin: 0px; }
-h2 { font-size: 120%; margin: 0px; }
-h3 { font-size: 110%; margin: 0px; }
-
-p,pre  { margin-left: 15px; }
-li { margin: 2px 15px; }
-dl { margin: 2px 15px; }
-
-a:link    { color: #0000dd; text-decoration: none; }
-a:visited { color: #330099; text-decoration: none; }
-a:active  { color: #3333ff; text-decoration: none; }
-
-/*
- * Boxen as Table elements:
- */
-td.title   { border: solid black 1px; background-color: #dddddd; }
-td.box     { border: solid black 1px; background-color: #eeeeee; }
-td.info    { border: solid black 1px; background-color: #ccccff; }
-td.warning { border: solid black 1px; background-color: #ffdddd; }
-
-/*
- * Special Table Boxen: for nesting, naked container and for
- * the Status field in CGI Output:
- */
-td.wrapbox { border: solid black 1px; padding: 5px; }
-td.container { padding: 0px; }
-td.status  { border: solid black 1px; background-color: #ff0000; color: #ffffff; font-size: 300%; font-weight: bolder; }
-
-/*
- * Same Boxen as <div>s:
- */
-div.title    { border: solid black 1px; background-color: #dddddd; margin: 20px; padding: 20px; }
-div.box      { border: solid black 1px; background-color: #eeeeee; margin: 20px; padding: 20px; }
-div.info     { border: solid black 1px; background-color: #ccccff; margin: 20px; padding: 20px; }
-div.warning  { border: solid black 1px; background-color: #ffdddd; margin: 20px; padding: 20px; }
-div.wrapbox  { border: solid black 1px;                            margin: 20px; padding:  5px; }
-
-
-/*
- * Bold definitions in <dl>s, grey BG for table headings, transparent (no-bordered) table
- */
-dt { font-weight: bold; }
-th { background-color: #dddddd; }
-table.transparent { border-style: none}
-
-/*
- * Special purpose paragraphs: Small for page footers,
- * Important for quoting wrong or dangerous examples,
- * Whiteframed for the toggle?mini=y CGI
- */
-p.small { font-size: 10px; margin: 0px; }
-p.important { border: solid black 1px; background-color: #ffdddd; font-weight: bold; padding: 2px; }
-p.whiteframed { margin: 5px; padding: 5px; border: solid black 1px; text-align: center; background-color: #eeeeee; }
-
-/*
- * Links as buttons:
- */
-
-td.buttons {
-  padding: 2px;
-}
-
-a.cmd, td.indentbuttons a, td.buttons a {
-  white-space: nowrap;
-  width: auto;
-  padding: 2px;
-  background-color: #dddddd;
-  color:            #000000;
-  text-decoration: none;
-  border-top:    1px solid #ffffff;
-  border-left:   1px solid #ffffff;
-  border-bottom: 1px solid #000000;
-  border-right:  1px solid #000000;
-}
-a.cmd:hover, td.indentbuttons a:hover, td.buttons a:hover {
-  background-color: #eeeeee;
-}
-a.cmd:active, td.indentbuttons a:active, td.buttons a:active {
-  border-top:    1px solid #000000;
-  border-left:   1px solid #000000;
-  border-bottom: 1px solid #ffffff;
-  border-right:  1px solid #ffffff;
-}
-
-
-/*
- * Special red emphasis:
- */
-em.warning, strong.warning { color: #ff0000 }
-
-/*
- * In show-status we use tables directly behind headlines
- * and for some reason or another the headlines are set to
- * "margin:0" and leave the tables no air to breath.
- *
- * A proper fix would be to replace or remove the "margin:0",
- * but as this affects every cgi page we do it another time
- * and use this workaround until then.
- */
-.box table { margin-top: 1em; }
-
-/*
- * Let the URL and pattern input fields scale with the browser
- * width and try to prevent vertical scroll bars if the width
- * is less than 80 characters. 
- */
-input.url, input.pattern { width: 95%; }
diff --git a/external/privoxy/templates/connect-failed b/external/privoxy/templates/connect-failed
deleted file mode 100644
index 3607552..0000000
--- a/external/privoxy/templates/connect-failed
+++ /dev/null
@@ -1,156 +0,0 @@
-##########################################################
-#
-# Connect-Failed Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  host-ip:
-#    The IP address of the host that could not be reached
-#  hostport:
-#    The host and port part of the request that lead to this problem
-#  path:
-#    The path part of the request that lead to this problem
-#
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>503 - Connect failed (Privoxy@@my-hostname@)</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-  <style type="text/css">
-#include cgi-style.css
-  </style>
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="status">
-        503
-      </td>     
-      <td class="title" style="width: 100%">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning" colspan="2">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning" colspan=2>
-        <h2>Connect failed</h2>
-          <p>Your request for <a href="@protocol@@hostport@@path@"><b>@protocol@@hostport@@path@</b></a> could
-            not be fulfilled, because the connection to <b>@host@</b> (@host-ip@) could not be established.
-          </p>
-          <p>This is often a temporary failure, so you might just
-            <a href="@protocol@@hostport@@path@">try again</a>.
-         </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box" colspan="2">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/default b/external/privoxy/templates/default
deleted file mode 100644
index 065aedc..0000000
--- a/external/privoxy/templates/default
+++ /dev/null
@@ -1,131 +0,0 @@
-##########################################################
-#
-# Default-CGI Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy@@my-hostname@</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Privoxy Menu:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-    
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/edit-actions-add-url-form b/external/privoxy/templates/edit-actions-add-url-form
deleted file mode 100644
index 32ee64f..0000000
--- a/external/privoxy/templates/edit-actions-add-url-form
+++ /dev/null
@@ -1,216 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-add-url-form,v $
-#
-# Purpose     :  Template used to add a URL pattern to the actions file.
-#
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-add-url-form,v $
-#    Revision 1.18  2007/12/08 14:36:43  fabiankeil
-#    - Use the shiny new CSS "pattern" class.
-#    - s@URL Pattern@URL or TAG Pattern@
-#
-#    Revision 1.17  2007/01/23 16:03:16  fabiankeil
-#    - Add favicon links.
-#    - Remove useless W3C validator links.
-#
-#    Revision 1.16  2006/07/18 14:49:13  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.14.2.2  2002/08/23 02:22:53  hal9
-#    Fix a perl brain fart with <li> in comments.
-#
-#    Revision 1.14  2002/05/21 19:10:30  oes
-#     - Added jump target and button style to "cancel" link
-#     - Fixed title
-#
-#    Revision 1.13  2002/04/10 13:32:53  oes
-#    Made templates modular
-#
-#    Revision 1.12  2002/04/08 17:08:14  oes
-#    Cosmetic: make status in title lowercase
-#
-#    Revision 1.11  2002/04/05 16:01:33  oes
-#    Correct HTML, external Stylesheets, eye candy, some fixes
-#
-#    Revision 1.10  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.9  2002/03/24 15:23:33  jongfoster
-#    Name changes
-#
-#    Revision 1.8  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.7  2002/03/23 16:18:15  swa
-#    renamed every reference to the old name with foobar.
-#    fixed "application foobar application" tag, fixed
-#    "the foobar" with "foobar". left junkbuster in cvs
-#    comments and remarks to history untouched. should
-#    make final rename easier.
-#
-#    Revision 1.6  2002/03/16 15:22:19  jongfoster
-#    Moving 'alpha' warning to the end of the page
-#
-#    Revision 1.5  2002/03/03 10:29:12  swa
-#    point users to the right feedback forms,
-#    not necessarily the developer list.
-#
-#    Revision 1.4  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.3  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.2  2002/01/17 21:21:03  jongfoster
-#    DOS->Unix line endings
-#
-#    Revision 1.1  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-##############################################################################
-#
-# Standard support:
-#
-# This file currently produces valid HTML 4.01 Strict.
-#
-# If you change it, please save the generated page from your web browser
-# and then upload it to http://validator.w3.org/ for checking.
-#
-#############################################################################
-#
-# Available variables include:
-#
-# filename
-# ver
-# section
-#
-#############################################################################
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-<head>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-
-  <title>Privoxy@@my-hostname@: Add URL Pattern</title>
-
-  <script type="text/javascript">
-<!--
-  function validate(text)
-  {
-  if (text=="")
-  {
-    alert("You need to type a pattern in order to continue!");
-    return false;
-  }
-
-  return true;
-}
-//-->
-  </script>
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Add URL or TAG Pattern</h2>
-        <form method="GET" action="edit-actions-add-url"
-              onSubmit="return validate(u.value);">
-          <p>
-            <input type="hidden" name="f" value="@f@">
-            <input type="hidden" name="v" value="@v@">
-            <input type="hidden" name="s" value="@s@">
-            <input type="text" name="u" value="" size="78" class="pattern"><br>
-            <input type="submit" value="Submit"> &nbsp;
-            <input type="reset" value="Reset"> &nbsp;
-            <a class="cmd" href="edit-actions-list?f=@f@#l@s@">Cancel</a>
-          </p>
-        </form>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
-
diff --git a/external/privoxy/templates/edit-actions-for-url b/external/privoxy/templates/edit-actions-for-url
deleted file mode 100644
index fd673af..0000000
--- a/external/privoxy/templates/edit-actions-for-url
+++ /dev/null
@@ -1,1425 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-for-url,v $
-#
-# Purpose     :  Template used to edit the actions associated with a
-#                particular section in an actions file.
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2001-2008 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-for-url,v $
-#    Revision 1.56  2008/09/20 10:04:33  fabiankeil
-#    Remove hide-forwarded-for-headers action which has
-#    been obsoleted by change-x-forwarded-for{block}.
-#
-#    Revision 1.55  2008/09/19 15:26:29  fabiankeil
-#    Add change-x-forwarded-for{} action to block or add
-#    X-Forwarded-For headers. Mostly based on code removed
-#    before 3.0.7.
-#
-#    Revision 1.54  2008/03/29 12:14:27  fabiankeil
-#    Remove send-wafer and send-vanilla-wafer actions.
-#
-#    Revision 1.53  2008/03/28 15:13:45  fabiankeil
-#    Remove inspect-jpegs action.
-#
-#    Revision 1.52  2008/03/15 14:52:36  fabiankeil
-#    Add CGI editor support for the "disable all filters of this type"
-#    directives "-client-header-filter", "-server-header-filter",
-#    "-client-header-tagger" and "-server-header-tagger".
-#
-#    Revision 1.51  2008/03/07 16:46:49  fabiankeil
-#    Reword limit-connect{} entry.
-#
-#    Revision 1.50  2008/03/04 18:30:44  fabiankeil
-#    Remove the treat-forbidden-connects-like-blocks action. We now
-#    use the "blocked" page for forbidden CONNECT requests by default.
-#
-#    Revision 1.49  2008/03/01 14:00:47  fabiankeil
-#    Let the block action take the reason for the block
-#    as argument and show it on the "blocked" page.
-#
-#    Revision 1.48  2007/12/11 21:18:55  fabiankeil
-#    Make forward-override accessible through the CGI editor.
-#
-#    Revision 1.47  2007/12/06 18:21:55  fabiankeil
-#    Update hide-forwarded-for-headers description.
-#
-#    Revision 1.46  2007/11/10 15:06:10  fabiankeil
-#    - Add support for +hide-referrer{conditional-forge}.
-#    - Minor rewordings.
-#
-#    Revision 1.45  2007/05/24 13:38:45  fabiankeil
-#    Two minor fixes.
-#
-#    Revision 1.44  2007/04/15 16:39:21  fabiankeil
-#    Introduce tags as alternative way to specify which
-#    actions apply to a request. At the moment tags can be
-#    created based on client and server headers.
-#
-#    Revision 1.43  2007/03/29 11:40:34  fabiankeil
-#    Divide @filter-params@ into @client-header-filter-params@
-#    @content-filter-params@ and @server-header-filter-params@.
-#
-#    Revision 1.42  2007/03/20 15:40:00  fabiankeil
-#    Adjust to new world order with dedicated header-filter actions.
-#
-#    Revision 1.41  2007/01/23 16:03:16  fabiankeil
-#    - Add favicon links.
-#    - Remove useless W3C validator links.
-#
-#    Revision 1.40  2006/12/21 13:01:03  fabiankeil
-#    Prepare for "split-large-forms".
-#
-#    Mention that redirect{} now also understands
-#    a single pcrs job as argument.
-#
-#    Add some table summaries and remove useless validator link.
-#
-#    Revision 1.39  2006/10/04 17:37:54  fabiankeil
-#    JavaScript fix for bug report #1570678.
-#
-#    Revision 1.38  2006/09/08 12:06:35  fabiankeil
-#    Have hide-if-modified-since interpret the random
-#    range value as minutes instead of hours. Allows
-#    more fine-grained configuration.
-#
-#    Revision 1.37  2006/09/05 18:20:14  fabiankeil
-#    Sorted alphabetically, fixed spelling mistakes
-#    and shortened some descriptions.
-#
-#    Revision 1.36  2006/08/14 08:29:17  fabiankeil
-#    Split filter-headers{} into filter-client-headers{}
-#    and filter-server-headers{}.
-#
-#    Revision 1.35  2006/08/03 02:46:42  david__schmidt
-#    Incorporate Fabian Keil's patch work:http://www.fabiankeil.de/sourcecode/privoxy/
-#
-#    Revision 1.34  2006/07/18 14:49:13  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.29.2.5  2004/10/05 03:17:26  david__schmidt
-#    Typo: inspect_jpegs, not inspect-jpegs in form
-#
-#    Revision 1.29.2.4  2004/10/03 12:53:46  david__schmidt
-#    Add the ability to check jpeg images for invalid
-#    lengths of comment blocks.  Defensive strategy
-#    against the exploit:
-#       Microsoft Security Bulletin MS04-028
-#       Buffer Overrun in JPEG Processing (GDI+) Could
-#       Allow Code Execution (833987)
-#    Enabled with +inspect-jpegs in actions files.
-#
-#    Revision 1.29.2.3  2002/08/23 02:22:53  hal9
-#    Fix a perl brain fart with <li> in comments.
-#
-#    Revision 1.29.2.1  2002/08/02 12:51:42  oes
-#    Added top submit button; Consistency with docs: Change default name for action from hide-referer to hide-referrer
-#
-#    Revision 1.29  2002/05/21 19:10:57  oes
-#    Fixed JavaScript error
-#
-#    Revision 1.28  2002/05/14 21:36:38  oes
-#     - Renamed prevent-(setting/reading)-cookies to
-#       crunch-(incoming/outgoing)-cookies
-#     - Renamed helplink export to actions-help-prefix
-#     - Restored alphabetical order of actions
-#
-#    Revision 1.27  2002/04/26 22:55:26  jongfoster
-#    Removing the alternating colors because they've been wrong
-#    since the actions renames, they're high maintenance, they
-#    don't look particularly good, and now there are gaps between
-#    the table cells we don't need them.
-#
-#    Revision 1.26  2002/04/26 21:55:17  jongfoster
-#    Cosmetic change: Making the +filter UI look the same as
-#    the other actions.
-#
-#    Revision 1.25  2002/04/26 21:37:50  jongfoster
-#    Fixing all(?) the substitutions that were broken in the
-#    recent actions rename.
-#
-#    Revision 1.24  2002/04/26 18:24:28  jongfoster
-#    Fixing typos in help hyperlinks
-#
-#    Revision 1.23  2002/04/26 12:57:02  oes
-#    Actions renamed, alphabetically sorted, comments fixed, and names linked to help
-#
-#    Revision 1.22  2002/04/10 13:32:53  oes
-#    Made templates modular
-#
-#    Revision 1.21  2002/04/08 17:05:18  oes
-#    Inline a style exception
-#
-#    Revision 1.20  2002/04/05 16:01:30  oes
-#    Correct HTML, external Stylesheets, eye candy, some fixes
-#
-#    Revision 1.19  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.18  2002/03/24 16:32:08  jongfoster
-#    Removing logo option
-#
-#    Revision 1.17  2002/03/24 15:23:33  jongfoster
-#    Name changes
-#
-#    Revision 1.16  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.15  2002/03/23 16:18:15  swa
-#    renamed every reference to the old name with foobar.
-#    fixed "application foobar application" tag, fixed
-#    "the foobar" with "foobar". left junkbuster in cvs
-#    comments and remarks to history untouched. should
-#    make final rename easier.
-#
-#    Revision 1.14  2002/03/16 15:22:19  jongfoster
-#    Moving 'alpha' warning to the end of the page
-#
-#    Revision 1.13  2002/03/16 14:28:38  jongfoster
-#    First version of modular filters support
-#
-#    Revision 1.12  2002/03/12 01:42:50  oes
-#    Introduced modular filters
-#
-#    Revision 1.11  2002/03/08 18:19:14  jongfoster
-#    Adding +image-blocker{pattern} option to edit interface
-#
-#    Revision 1.10  2002/03/03 10:29:12  swa
-#    point users to the right feedback forms,
-#    not necessarily the developer list.
-#
-#    Revision 1.9  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.8  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.7  2002/01/17 21:21:03  jongfoster
-#    DOS->Unix line endings
-#
-#    Revision 1.6  2001/11/22 21:58:41  jongfoster
-#    Adding action +no-cookies-keep
-#
-#    Revision 1.5  2001/11/13 21:12:17  jongfoster
-#    Added support for the following actions:
-#    +downgrade, +limit-connect, +no-compression
-#
-#    Revision 1.4  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-##############################################################################
-#
-# Browser support for the JavaScript on this page:
-#   MS Internet Explorer 5.5 - Tested,   Yes
-#   Netscape 6.0             - Tested,   Yes
-#   Netscape 4.75            - Tested,   NO
-#   Opera 5.12               - Tested,   NO
-#   MS Internet Explorer 4+  - Untested, Yes
-#   MS IE 3.x, NS3.x         - Untested, NO
-#   Mozilla >=0.6            - Untested, Yes
-#
-# All browsers should work, you just might not get the pretty DHTML effects.
-#
-# The effects that only work under the browsers marked "Yes" above are:
-#  - Text edit boxes that won't have any effect are disabled.
-#  - Table rows containing additional settings are hidden if the feature in
-#    question is disabled.
-#
-# There are major kludges to get around these problems with NS4, but they
-# screw up the HTML too much for other browsers.  If anyone wants to try,
-# here's some descriptions of the kludges:
-#    http://www.webreference.com/js/tips/991114.html
-#    http://www.webreference.com/dhtml/column12/outDisplay.html
-#
-# If you're favorite browser isn't listed, please test and add it.
-#
-#
-#############################################################################
-#
-# Standard support:
-#
-# This file currently produces valid HTML 4.01 Strict.
-#
-# If you change it, please save the generated page from your web browser
-# and then upload it to http://validator.w3.org/ for checking.
-#
-#############################################################################
-#
-# Available variables include:
-#
-# action-name-y
-# action-name-n
-# action-name-x
-#
-# deanimate-gifs-param-first
-# deanimate-gifs-param-last
-# hide-from-param-block
-# hide-from-param-custom
-# hide-from-param
-# hide-referrer-param-forge
-# hide-referrer-param-block
-# hide-referrer-param-custom
-# hide-referrer-param
-# hide-user-agent-param
-# image-blocker-param-pattern
-# image-blocker-param-blank
-# image-blocker-param-custom
-#
-#
-#############################################################################
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-
-  <title>Privoxy@@my-hostname@: Edit actions</title>
-
-<style type="text/css">
-td.action    { font-weight: bold;
-               font-style: italic;
-               white-space: nowrap       }
-td.subaction { font-style: italic        }
-th           { font-weight: bold;        }
-# This is the key to the color names below:
-# bg=background, en="Enable", dis="Disable", noc="No Change", hdr=header
-# 1=odd rows, 2=even rows, h=Table header
-tr.hdr       { background-color: #999999 }
-tr.bg1       { background-color: #eeeeee }
-td.en1       { background-color: #ddffdd }
-td.dis1      { background-color: #ffdddd }
-td.noc1      { background-color: #ddddff }
-th.enh       { background-color: #99ff99 }
-th.dish      { background-color: #ff9999 }
-th.noch      { background-color: #9999ff }
-table.wide   { padding: 5px; }
-td.green     { border: solid black 1px; background-color: #ddffdd; }
-</style>
-
-<!--
-border-color: white;
-               border-style: solid;
-               border-left-width: 10px;
-               border-right-width: 10px;
-               border-top-width: 0px;
-               border-bottom-width: 0px  }
--->
-
-<script type="text/javascript">
-<!--
-
-function hide_from_header_param_disable(tf)
-{
-    if (document.getElementById) {
-    	// NS6 or IE5
-        document.getElementById("hide_from_header_param").disabled = tf;
-    } else if (document.all) {
-        // IE4
-        document.myform.hide_from_header_param.disabled = tf;
-    }
-}
-
-function hide_referrer_param_disable(tf)
-{
-    if (document.getElementById) {
-        document.getElementById("hide_referrer_param").disabled = tf;
-    } else if (document.all) {
-        document.myform.hide_referrer_param.disabled = tf;
-    }
-}
-
-function set_image_blocker_param_disable(tf)
-{
-    if (document.getElementById) {
-        document.getElementById("set_image_blocker_param").disabled = tf;
-    } else if (document.all) {
-        document.myform.set_image_blocker_param.disabled = tf;
-    }
-}
-
-function show_add_header_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("add_header_opts");
-    } else if (document.all) {
-        target = document.add_header_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-function show_deanimate_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("deanimate_opts");
-    } else if (document.all) {
-        target = document.deanimate_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-function show_hide_from_header_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("hide_from_header_opts");
-    } else if (document.all) {
-        target = document.hide_from_header_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-function show_hide_referrer_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("hide_referrer_opts");
-    } else if (document.all) {
-        target = document.hide_referrer_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-function show_user_agent_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("user_agent_opts");
-    } else if (document.all) {
-        target = document.user_agent_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-function show_set_image_blocker_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("set_image_blocker_opts");
-    } else if (document.all) {
-        target = document.set_image_blocker_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-function show_limit_connect_opts(tf)
-{
-    if (document.getElementById) {
-        target = document.getElementById("limit_connect_opts");
-    } else if (document.all) {
-        target = document.limit_connect_opts;
-    } else {
-        return;
-    }
-    target.style.display = (tf ? "" : "none");
-}
-
-//-->
-</script>
-</head>
-
-<body>
-
-<!-- @if-one-form-only-start -->
-<form method="GET" action="edit-actions-submit" id="myform" name="myform">
-<!-- if-one-form-only-end@ -->
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-<!-- @if-one-form-only-start -->
-    <tr>
-      <td class="box">
-        <h2>Edit Actions
-          <input type="hidden" name="f" value="@f@">
-          <input type="hidden" name="v" value="@v@">
-          <input type="hidden" name="s" value="@s@">
-        </h2>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="green" align="center">
-        <p><input type="submit" value="Submit" name="Submit"></p>
-      </td>
-    </tr>
-<!-- if-one-form-only-end@ -->
-
-<tr><td class="wrapbox">
-
-<!-- @if-multiple-forms-start -->
-<form method="GET" action="edit-actions-submit" id="myform" name="myform">
-  <h2>Edit Actions (Section 1)</h2>
-<!-- if-multiple-forms-end@ -->
-
-  <table summary="Action section 1" border="0" cellspacing="2" width="100%" class="wide">
-    <tr class="hdr" align="left">
-      <th class="enh" align="center">Enable</th>
-      <th class="dish" align="center">Disable</th>
-      <th class="noch" align="center">No Change</th>
-      <th>Action</th>
-      <th>Description</th>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="add_header" id="add_header_y" value="Y" @add-header-y@
-        onclick="show_add_header_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="add_header" value="N" @add-header-n@
-        onclick="show_add_header_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="add_header" value="X" @add-header-x@
-        onclick="show_add_header_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@ADD-HEADER">add-header</a></td>
-      <td>Adds HTTP headers.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="add_header_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Editing the settings for this option, or turning
-        it on if it was off, is not yet supported using this web-based
-        editor.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="block" value="Y" @block-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="block" value="N" @block-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="block" value="X" @block-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@BLOCK">block</a></td>
-      <td>Block the request.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="block_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Block reason to tell the user:<br>
-        <input type="text" name="block_mode" size="40" value="@block-param@">
-      </td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="change_x_forwarded_for" id="change_x_forwarded_for_y" value="Y" @change-x-forwarded-for-y@
-        onclick="show_change_x_forwarded_for_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="change_x_forwarded_for" value="N" @change-x-forwarded-for-n@
-        onclick="show_change_x_forwarded_for_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="change_x_forwarded_for" value="X" @change-x-forwarded-for-x@
-        onclick="show_change_x_forwarded_for_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CHANGE-X-FORWARDED-FOR">change-x-forwarded-for</a></td>
-      <td>Specifies whether to block or add X-Forwarded-For headers.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="change_x_forwarded_for_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="change_x_forwarded_for_mode" value="block"
-        id="change_x_forwarded_for_mode_block" @change-x-forwarded-for-param-block@><label
-        for="change_x_forwarded_for_mode_block">Block the header.</label><br>
-        <input type="radio" name="change_x_forwarded_for_mode" value="add"
-        id="change_x_forwarded_for_mode_add" @change-x-forwarded-for-param-add@><label 
-        for="change_x_forwarded_for_mode_add">Add the header.</label><br>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="client_header_filter_all" id="client_header_filter_all_n" value="N" @client-header-filter-all-n@ ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="client_header_filter_all" id="client_header_filter_all_x" value="X" @client-header-filter-all-x@ ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CLIENT-HEADER-FILTER">client-header-filter</a> *</td>
-      <td>Filter the client headers.
-        You can use the radio buttons on this line to disable
-        all client-header filters applied by previous rules, and/or
-        you can enable or disable the filters individually below.</td>
-    </tr>
-@client-header-filter-params@
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="client_header_tagger_all" id="client_header_tagger_all_n" value="N" @client-header-tagger-all-n@ ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="client_header_tagger_all" id="client_header_tagger_all_x" value="X" @client-header-tagger-all-x@ ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CLIENT-HEADER-TAGGER">client-header-tagger</a> *</td>
-      <td>Create tags based on the client headers.
-        You can use the radio buttons on this line to disable
-        all client-header taggers applied by previous rules, and/or
-        you can enable or disable the taggers individually below.</td>
-    </tr>
-@client-header-tagger-params@
-   <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="content_type_overwrite" value="Y" @content-type-overwrite-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="content_type_overwrite" value="N" @content-type-overwrite-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="content_type_overwrite" value="X" @content-type-overwrite-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CONTENT_TYPE_OVERWRITE">content-type-overwrite</a></td>
-      <td>Replace Content-Type header. By default it only applies to
-	 text documents, but if you know what you're doing you
-	 can enable force-text-mode to modify binary content types as well.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="content_type_overwrite_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>New Content-Type:<br>
-        <input type="text" name="content_type_overwrite_mode" size="40"
-        value="@content-type-overwrite-param@"></td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="crunch_client_header" id="crunch_client_header_y" value="Y" @crunch-client-header-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="crunch_client_header" value="N" @crunch-client-header-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="crunch_client_header" value="X" @crunch-client-header-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-CLIENT-HEADER">crunch-client-header</a></td>
-      <td>Remove header(s) matching the supplied pattern.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="crunch_client_header_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Header string to suppress:<br>
-        <input type="text" name="crunch_client_header_mode" size="40"
-        value="@crunch-client-header-param@"></td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="crunch_if_none_match" value="Y" @crunch-if-none-match-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="crunch_if_none_match" value="N" @crunch-if-none-match-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="crunch_if_none_match" value="X" @crunch-if-none-match-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH_IF_NONE_MATCH">crunch-if-none-match</a></td>
-      <td>Remove If-None-Match header. Useful for filter testing
-         and to make sure the header can't be used to track your visits.</td>
-    </tr>
-
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="crunch_incoming_cookies" value="Y" @crunch-incoming-cookies-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="crunch_incoming_cookies" value="N" @crunch-incoming-cookies-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="crunch_incoming_cookies" value="X" @crunch-incoming-cookies-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</a></td>
-      <td>Prevent the website from setting HTTP cookies on your system.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="crunch_outgoing_cookies" value="Y" @crunch-outgoing-cookies-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="crunch_outgoing_cookies" value="N" @crunch-outgoing-cookies-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="crunch_outgoing_cookies" value="X" @crunch-outgoing-cookies-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</a></td>
-      <td>Prevent the website from reading HTTP cookies from your system.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="crunch_server_header" id="crunch_server_header_y" value="Y" @crunch-server-header-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="crunch_server_header" value="N" @crunch-server-header-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="crunch_server_header" value="X" @crunch-server-header-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@CRUNCH-SERVER-HEADER">crunch-server-header</a></td>
-      <td>Remove server header(s) matching the supplied pattern.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="crunch_server_header_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Header string to suppress:<br>
-        <input type="text" name="crunch_server_header_mode" size="40"
-        value="@crunch-server-header-param@"></td>
-    </tr>
-
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="deanimate_gifs" id="deanimate_gifs_y" value="Y" @deanimate-gifs-y@
-        onclick="show_deanimate_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="deanimate_gifs" value="N" @deanimate-gifs-n@
-        onclick="show_deanimate_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="deanimate_gifs" value="X" @deanimate-gifs-x@
-        onclick="show_deanimate_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@DEANIMATE-GIFS">deanimate-gifs</a></td>
-      <td>Replace animated GIFs with their (first/last) frame.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="deanimate_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Use the <input type="radio" name="deanimate_gifs_mode"
-        value="first" id="deanimate_first" @deanimate-gifs-param-first@><label
-        for="deanimate_first">first frame</label>&nbsp;&nbsp; <input
-        type="radio" name="deanimate_gifs_mode" value="last" 
-        id="deanimate_last" @deanimate-gifs-param-last@><label
-        for="deanimate_last">last frame</label></td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="downgrade_http_version" value="Y" @downgrade-http-version-y@></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="downgrade_http_version" value="N" @downgrade-http-version-n@></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="downgrade_http_version" value="X" @downgrade-http-version-x@></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@DOWNGRADE-HTTP-VERSION"
-       >downgrade-http-version</a></td>
-      <td>Change HTTP/1.1 requests to HTTP/1.0.  Only change if you know
-        what you're doing!</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="fast_redirects" value="Y" @fast-redirects-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="fast_redirects" value="N" @fast-redirects-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="fast_redirects" value="X" @fast-redirects-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@FAST-REDIRECTS">fast-redirects</a></td>
-      <td>Bypass some click-tracking URLs.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="fast-redirects_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>
-       <input type="radio" name="fast_redirects_mode"
-        value="simple-check" id="fast_redirects_simple_check" @fast-redirects-param-simple-check@><label
-        for="fast_redirects_simple_check">Simple check.</label>
-       <br>
-       <input type="radio" name="fast_redirects_mode" value="check-decoded-url" 
-        id="fast_redirects_check_decoded_url" @fast-redirects-param-check-decoded-url@><label
-        for="fast_redirects_check_decoded_url">Decode URL before checking.</label></td>
-    </tr>
-<!-- @if-multiple-forms-start -->
-   </table>
-   <p>
-    <input type="hidden" name="f" value="@f@">
-    <input type="hidden" name="v" value="@v@">
-    <input type="hidden" name="s" value="@s@">
-    <input type="submit" value="Submit changes in Section 1" name="Submit">
-  </p>
-  </form>
- </td></tr>
- <tr><td class="wrapbox">
-  <form method="GET" action="edit-actions-submit" id="myform-2" name="myform">
-  <h2>Edit Actions (Section 2)</h2>
-  <table summary="Action section 2" border="0" cellspacing="2" width="100%" class="wide">
-    <tr class="hdr" align="left">
-      <th class="enh" align="center">Enable</th>
-      <th class="dish" align="center">Disable</th>
-      <th class="noch" align="center">No Change</th>
-      <th>Action</th>
-      <th>Description</th>
-    </tr>
-<!-- if-multiple-forms-end@ -->
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="filter_all" id="filter_all_n" value="N" @filter-all-n@ ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="filter_all" id="filter_all_x" value="X" @filter-all-x@ ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@FILTER">filter</a> *</td>
-      <td>Filter the website through regular expression
-        filters.  You can use the radio buttons on this line to disable
-        all filters applied by previous rules, and/or you can enable or
-        disable the filters individually below.</td>
-    </tr>
-
-@content-filter-params@
-
-<!-- @if-multiple-forms-start -->
-   </table>
-   <p>
-    <input type="hidden" name="f" value="@f@">
-    <input type="hidden" name="v" value="@v@">
-    <input type="hidden" name="s" value="@s@">
-    <input type="submit" value="Submit changes in Section 2" name="Submit">
-   </p>
-  </form>
- </td></tr>
- <tr><td class="wrapbox">
-  <form method="GET" action="edit-actions-submit" id="myform-3" name="myform">
-  <h2>Edit Actions (Section 3)</h2>
-  <table summary="Action section 3" border="0" cellspacing="2" width="100%" class="wide">
-    <tr class="hdr" align="left">
-      <th class="enh" align="center">Enable</th>
-      <th class="dish" align="center">Disable</th>
-      <th class="noch" align="center">No Change</th>
-      <th>Action</th>
-      <th>Description</th>
-    </tr>
-<!-- if-multiple-forms-end@ -->
-   <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="force_text_mode" value="Y" @force-text-mode-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="force_text_mode" value="N" @force-text-mode-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="force_text_mode" value="X" @force-text-mode-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@FORCE_TEXT_MODE">force-text-mode</a></td>
-      <td>
-       Enable filtering on documents whose Content-Type wasn't recognized as text.
-       Do think twice, nothing is alright.
-     </td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="forward_override" id="forward_override_y" value="Y" @forward-override-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="forward_override" id="forward_override_n" value="N" @forward-override-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="forward_override" id="forward_override_x" value="X" @forward-override-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@FORWARD-OVERRIDE">forward-override</a></td>
-      <td>Override forward directives in the configuration file.
-          Note that the <a href="@user-manual@xxxxxxxxxxxxxxxxx#FORWARD-OVERRIDE">parameter syntax</a>
-          isn't checked until the action is used. <strong class="warning">Syntax errors
-          will cause Privoxy to exit.</strong></td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="forward_override_language_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>
-        Overriding forward directive:<br>
-        <input type="text" name="forward_override_param" 
-        id="forward_override_param" size="40"
-        value="@forward-override-param@"><br>
-     </td>
-    </tr>
-   <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="handle_as_empty_document" value="Y" @handle-as-empty-document-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="handle_as_empty_document" value="N" @handle-as-empty-document-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="handle_as_empty_document" value="X" @handle-as-empty-document-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HANDLE_AS_EMPTY_DOCUMENT">handle-as-empty-document</a></td>
-      <td>
-       Block with an <em>empty</em> document instead of an Image or HTML message.
-       The <em>empty</em> document contains only a space and can safely be parsed
-       as JavaScript or Style Sheet. Use content-type-overwrite to specify the
-       Content-Type, default is <q>text/html</q>.
-     </td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="handle_as_image" value="Y" @handle-as-image-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="handle_as_image" value="N" @handle-as-image-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="handle_as_image" value="X" @handle-as-image-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HANDLE-AS-IMAGE">handle-as-image</a></td>
-      <td>Request is for an image (only useful in conjunction with the <i><b><a href="@user-manual@@actions-help-prefix@BLOCK">block</a></b></i>
-        and <i><b><a href="@user-manual@@actions-help-prefix@SET-IMAGE-BLOCKER">set-image-blocker</a></b></i> actions).</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="hide_accept_language" id="hide_accept_language_y" value="Y" @hide-accept-language-y@
-        onclick="show_hide_accept_language_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="hide_accept_language" id="hide_accept_language_n" value="N" @hide-accept-language-n@
-        onclick="show_hide_accept_language_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="hide_accept_language" id="hide_accept_language_x" value="X" @hide-accept-language-x@
-        onclick="show_hide_accept_language_opts(false)"
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-ACCEPT-LANGUAGE">hide-accept-language</a></td>
-      <td>Pretend to have different language settings. (Makes a fake User-Agent more believable,
-          but you may end up with content in the language you pretended to understand.)</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="hide_accept-language_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="hide_accept_language_mode" value="block"
-        onclick="hide_accept_language_param_disable(true)"
-        @hide-accept-language-param-block@ id="hide_accept_language_mode_block"><label
-        for="hide_accept_language_mode_block">Remove Accept-Language header without replacement.</label>
-        <br>
-        <input type="radio" name="hide_accept_language_mode" value="CUSTOM"
-        onclick="hide_accept_language_param_disable(false)"
-        @hide-accept-language-param-custom@ id="hide_accept_language_mode_set"><label
-        for="hide_accept_language_mode_set">Fake these language settings:</label><br>
-        <input type="text" name="hide_accept_language_param" 
-        id="hide_accept_language_param" size="40"
-        value="@hide-accept-language-param@"><br>
-     </td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="hide_content_disposition" id="hide_content_disposition_y" value="Y" @hide-content-disposition-y@
-        onclick="show_hide_content_disposition_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="hide_content_disposition" id="hide_content_disposition_n" value="N" @hide-content-disposition-n@
-        onclick="show_hide_content_disposition_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="hide_content_disposition" id="hide_content_disposition_x" value="X" @hide-content-disposition-x@
-        onclick="show_hide_content_disposition_opts(false)"
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-CONTENT-DISPOSITION">hide-content-disposition</a></td>
-      <td>Block or overwrite the content-disposition header. Useful to view a document inside the browser,
-       even if you were supposed to save it first, or to change the suggested file name.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="hide_content_disposition_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="hide_content_disposition_mode" value="block"
-        onclick="hide_content_disposition_param_disable(true)"
-        @hide-content-disposition-param-block@ id="hide_content_disposition_mode_block"><label
-        for="hide_content_disposition_mode_block">Remove content-disposition header without replacement.</label>
-        <br>
-        <input type="radio" name="hide_content_disposition_mode" value="CUSTOM"
-        onclick="hide_content_disposition_param_disable(false)"
-        @hide-content-disposition-param-custom@ id="hide_content_disposition_mode_set"><label
-        for="hide_content_disposition_mode_set">Overwrite content-dispostion header with:</label><br>
-        <input type="text" name="hide_content_disposition_param" 
-        id="hide_content_disposition_param" size="40"
-        value="@hide-content-disposition-param@"><br>
-     </td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="hide_from_header" id="hide_from_header_y" value="Y" @hide-from-header-y@
-        onclick="show_hide_from_header_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="hide_from_header" value="N" @hide-from-header-n@
-        onclick="show_hide_from_header_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="hide_from_header" value="X" @hide-from-header-x@
-        onclick="show_hide_from_header_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-FROM-HEADER">hide-from-header</a></td>
-      <td>Stop old web browsers from sending the user's e-mail address with
-        every request.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="hide_from_header_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="hide_from_header_mode" value="block"
-        onclick="hide_from_header_param_disable(true);"
-        @hide-from-header-param-block@ id="hide_from_header_mode_block"><label
-        for="hide_from_header_mode_block">Remove completely</label><br>
-        <input type="radio" name="hide_from_header_mode" value="CUSTOM" 
-        onclick="hide_from_header_param_disable(false);"
-        @hide-from-header-param-custom@ id="hide_from_header_mode_set"><label
-        for="hide_from_header_mode_set">Fake e-mail address:</label><br>
-        <input type="text" name="hide_from_header_param" id="hide_from_header_param"
-        size="40" value="@hide-from-header-param@"></td>
-    </tr>
-
-   <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="hide_if_modified_since" value="Y" @hide-if-modified-since-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="hide_if_modified_since" value="N" @hide-if-modified-since-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="hide_if_modified_since" value="X" @hide-if-modified-since-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE_IF_MODIFIED_SINCE">hide-if-modified-since</a></td>
-      <td>Remove or randomize the If-Modified-Since header.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="hide_if-modifed-since_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="hide_if_modified_since_mode" value="block"
-        onclick="hide_if_modified_since_param_disable(true)"
-        @hide-if-modified-since-param-block@ id="hide_if_modified_since_mode_block"><label
-        for="hide_if_modified_since_mode_block">Remove without replacement.</label>
-        Useful for filter testing.<br>
-        <input type="radio" name="hide_if_modified_since_mode" value="CUSTOM"
-        onclick="hide_if_modified_since_param_disable(true)"
-        @hide-if-modified-since-param-custom@ id="hide_if_modified_since_mode_set"><label
-        for="hide_if_modified_since_mode_set">Add random amount of seconds in the range of</label>
-        <input type="text" name="hide_if_modified_since_param" 
-        id="hide_if_modified_since_param" size="4"
-        value="@hide-if-modified-since-param@"> minute(s).
-        To appreciate this option a small amount of paranoia is required,
-        but at least in theory the If-Modified-Since header could be used
-	to keep track of your visits.
-     </td>
-    </tr>
-<!-- @if-multiple-forms-start -->
-   </table>
-   <p>
-    <input type="hidden" name="f" value="@f@">
-    <input type="hidden" name="v" value="@v@">
-    <input type="hidden" name="s" value="@s@">
-    <input type="submit" value="Submit changes in Section 3" name="Submit">
-   </p>
-  </form>
- </td></tr>
- <tr><td class="wrapbox">
-  <form method="GET" action="edit-actions-submit" id="myform-4" name="myform">
-  <h2>Edit Actions (Section 4)</h2>
-  <table summary="Action section 4" border="0" cellspacing="2" width="100%" class="wide">
-    <tr class="hdr" align="left">
-      <th class="enh" align="center">Enable</th>
-      <th class="dish" align="center">Disable</th>
-      <th class="noch" align="center">No Change</th>
-      <th>Action</th>
-      <th>Description</th>
-    </tr>
-<!-- if-multiple-forms-end@ -->
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="hide_referrer" id="hide_referrer_y" value="Y" @hide-referrer-y@
-        onclick="show_hide_referrer_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="hide_referrer" id="hide_referrer_n" value="N" @hide-referrer-n@
-        onclick="show_hide_referrer_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="hide_referrer" id="hide_referrer_x" value="X" @hide-referrer-x@
-        onclick="show_hide_referrer_opts(false)"
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-REFERRER">hide-referrer</a></td>
-      <td>Helps prevent tracking by not sending the URL of the previous web
-        page.&nbsp;</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="hide_referrer_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="hide_referrer_mode" value="block"
-        onclick="hide_referrer_param_disable(true)"
-        @hide-referrer-param-block@ id="hide_referrer_mode_block"><label
-        for="hide_referrer_mode_block">Remove completely</label> (breaks images
-        on some free web hosts).<br>
-        <input type="radio" name="hide_referrer_mode" value="forge"
-        onclick="hide_referrer_param_disable(true)"
-        @hide-referrer-param-forge@ id="hide_referrer_mode_forge"><label
-        for="hide_referrer_mode_forge">Fake as the root directory of the
-        site</label> (fools checks for in-site links.)<br>
-        <input type="radio" name="hide_referrer_mode" value="CUSTOM"
-        onclick="hide_referrer_param_disable(false)"
-        @hide-referrer-param-custom@ id="hide_referrer_mode_set"><label
-        for="hide_referrer_mode_set">Fake as this web address:</label><br>
-        <input type="text" name="hide_referrer_param" 
-        id="hide_referrer_param" size="40"
-        value="@hide-referrer-param@"><br>
-        <input type="radio" name="hide_referrer_mode" value="conditional-block"
-        onclick="hide_referrer_param_disable(true)"
-        @hide-referrer-param-conditional-block@ id="hide_referrer_mode_conditional-block"><label
-        for="hide_referrer_mode_conditional-block">Remove completely if host has changed,
-        but don't touch in-site referrers.
-        Less suspicious than the options above.</label><br>
-        <input type="radio" name="hide_referrer_mode" value="conditional-forge"
-        onclick="hide_referrer_param_disable(true)"
-        @hide-referrer-param-conditional-forge@ id="hide_referrer_mode_conditional-forge"><label
-        for="hide_referrer_mode_conditional-forge">Forge referrer if host has
-        changed, but don't touch in-site referrers.</label><br>
-      </td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="hide_user_agent" id="hide_user_agent_y" value="Y" @hide-user-agent-y@
-        onclick="show_user_agent_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="hide_user_agent" value="N" @hide-user-agent-n@
-        onclick="show_user_agent_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="hide_user_agent" value="X" @hide-user-agent-x@
-        onclick="show_user_agent_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@HIDE-USER-AGENT">hide-user-agent</a></td>
-      <td>Pretend to be using a different web browser.&nbsp; (May cause problems with broken web sites).</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="user_agent_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>User Agent string to send:<br>
-        <input type="text" name="hide_user_agent_mode" size="40"
-        value="@hide-user-agent-param@"></td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="limit_connect" id="limit_connect_y" value="Y" @limit-connect-y@
-        onclick="show_limit_connect_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="limit_connect" value="N" @limit-connect-n@
-        onclick="show_limit_connect_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="limit_connect" value="X" @limit-connect-x@
-        onclick="show_limit_connect_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@LIMIT-CONNECT">limit-connect</a></td>
-      <td>Limit which ports are allowed in HTTP CONNECT requests. These requests are
-        used to tunnel SSL and other protocols through HTTP proxies.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="limit_connect_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Legal ports (comma separated, ranges allowed):<br>
-        <input type="text" name="limit_connect_mode" size="40"
-        value="@limit-connect-param@"></td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="overwrite_last_modified" value="Y" @overwrite-last-modified-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="overwrite_last_modified" value="N" @overwrite-last-modified-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="overwrite_last_modified" value="X" @overwrite-last-modified-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@OVERWRITE_LAST_MODIFIED">overwrite-last-modified</a></td>
-      <td>Remove or randomize the Last-Modified header.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="overwrite_last_modified_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="overwrite_last_modified_mode" value="block"
-        onclick="overwrite_last_modified_param_disable(true)"
-        @overwrite-last-modified-param-block@ id="overwrite_last_modified_mode_block"><label
-        for="overwrite_last_modified_mode_block">Remove without replacement.</label>
-        <br>
-        <input type="radio" name="overwrite_last_modified_mode" value="reset-to-request-time"
-        onclick="overwrite_last_modified_param_disable(true)"
-        @overwrite-last-modified-param-reset-to-request-time@
-         id="overwrite_last_modified_mode_reset-to-request-time"><label
-        for="overwrite_last_modified_mode_reset-to-request-time">Reset to the time of the request.</label>
-        <br>
-        <input type="radio" name="overwrite_last_modified_mode" value="randomize"
-        onclick="overwrite_last_modified_param_disable(true)"
-        @overwrite-last-modified-param-randomize@
-         id="overwrite_last_modified_mode_randomize"><label
-        for="overwrite_last_modified_mode_randomize">Overwrite with random value
-        between original header value and the time of the request.</label>
-     </td>
-    </tr>
-
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="prevent_compression" value="Y" @prevent-compression-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="prevent_compression" value="N" @prevent-compression-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="prevent_compression" value="X" @prevent-compression-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@PREVENT-COMPRESSION">prevent-compression</a></td>
-      <td>Disables compression.  Compressed web pages are faster to
-        download, but cannot be filtered with <a href="@user-manual@@actions-help-prefix@FILTER"><b>filter</b></a>
-        or <a href="@user-manual@@actions-help-prefix@KILL-POPUPS"><b>kill-popups</b></a>
-        if your Privoxy version was build without zlib support.</td>
-    </tr>
-   <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="redirect" value="Y" @redirect-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="redirect" value="N" @redirect-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="redirect" value="X" @redirect-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@REDIRECT">redirect</a></td>
-      <td>Redirect to another address.
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="redirect_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td>Static address or a single pcrs command to redirect to a rewritten version of the original URL:<br>
-        <input type="text" name="redirect_mode" size="40"
-        value="@redirect-param@"></td>
-    </tr>
-
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="server_header_filter_all" id="server_header_filter_all_n" value="N" @server-header-filter-all-n@ ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="server_header_filter_all" id="server_header_filter_all_x" value="X" @server-header-filter-all-x@ ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@SERVER-HEADER-FILTER">server-header-filter</a> *</td>
-      <td>Filter the server headers.
-        You can use the radio buttons on this line to disable
-        all server-header filters applied by previous rules, and/or
-        you can enable or disable the filters individually below.</td>
-    </tr>
-@server-header-filter-params@
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="server_header_tagger_all" id="server_header_tagger_all_n" value="N" @server-header-tagger-all-n@ ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="server_header_tagger_all" id="server_header_tagger_all_x" value="X" @server-header-tagger-all-x@ ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@SERVER-HEADER-TAGGER">server-header-tagger</a> *</td>
-      <td>Create tags based on the server headers.
-        You can use the radio buttons on this line to disable
-        all server-header taggers applied by previous rules, and/or
-        you can enable or disable the taggers individually below.</td>
-    </tr>
-@server-header-tagger-params@
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="session_cookies_only" value="Y" @session-cookies-only-y@
-        ></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="session_cookies_only" value="N" @session-cookies-only-n@
-        ></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="session_cookies_only" value="X" @session-cookies-only-x@
-        ></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@SESSION-COOKIES-ONLY">session-cookies-only</a></td>
-      <td>HTTP cookies set by the website are changed to temporary
-        ("per-session") ones, which only last until you close your web
-        browser.  This will allow you to use sites that require cookies, but
-        sites will not be able to track you across sessions.  For this to
-        be useful, you should disable 
-        <a href="@user-manual@@actions-help-prefix@CRUNCH-OUTGOING-COOKIES"><b>crunch-outgoing-cookies</b></a> and
-        <a href="@user-manual@@actions-help-prefix@CRUNCH-INCOMING-COOKIES"><b>crunch-incoming-cookies</b></a>.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top">
-      <td class="en1" align="center" valign="middle"><input type="radio"
-        name="set_image_blocker" id="set_image_blocker_y" value="Y" @set-image-blocker-y@
-        onclick="show_set_image_blocker_opts(true)"></td>
-      <td class="dis1" align="center" valign="middle"><input type="radio"
-        name="set_image_blocker" value="N" @set-image-blocker-n@
-        onclick="show_set_image_blocker_opts(false)"></td>
-      <td class="noc1" align="center" valign="middle"><input type="radio"
-        name="set_image_blocker" value="X" @set-image-blocker-x@
-        onclick="show_set_image_blocker_opts(false)"></td>
-      <td class="action"><a href="@user-manual@@actions-help-prefix@SET-IMAGE-BLOCKER">set-image-blocker</a></td>
-      <td>Specifies how to block images.</td>
-    </tr>
-    <tr class="bg1" align="left" valign="top" id="set_image_blocker_opts">
-      <td class="en1">&nbsp;</td>
-      <td class="dis1">&nbsp;</td>
-      <td class="noc1">&nbsp;</td>
-      <td>&nbsp;</td>
-      <td><input type="radio" name="set_image_blocker_mode"
-        onclick="set_image_blocker_param_disable(true)"
-        value="pattern" id="set_image_blocker_mode_pattern"
-        @set-image-blocker-param-pattern@><label
-        for="set_image_blocker_mode_pattern">Send a pattern (<img
-        src="send-banner?type=p" width="12" height="12"
-        alt="pattern">)</label><br>
-        <input type="radio" name="set_image_blocker_mode" value="blank"
-        onclick="set_image_blocker_param_disable(true)"
-        id="set_image_blocker_mode_blank" @set-image-blocker-param-blank@><label 
-        for="set_image_blocker_mode_blank">Send a 1x1 transparent GIF</label><br>
-        <input type="radio" name="set_image_blocker_mode" value="CUSTOM"
-        onclick="set_image_blocker_param_disable(false)"
-        id="set_image_blocker_mode_set" @set-image-blocker-param-custom@><label
-        for="set_image_blocker_mode_set">Redirect
-        the browser to this image URL:</label><br>
-        <input type="text" name="set_image_blocker_param" id="set_image_blocker_param"
-        size="40" value="@set-image-blocker-param@"></td>
-    </tr>
-  </table>
-
-<!-- @if-multiple-forms-start -->
-  <p>
-   <input type="hidden" name="f" value="@f@">
-   <input type="hidden" name="v" value="@v@">
-   <input type="hidden" name="s" value="@s@">
-   <input type="submit" value="Submit changes in Section 4" name="Submit">
-  </p>
- </form>
-<!-- if-multiple-forms-end@ -->
-</td></tr>
-<!-- @if-one-form-only-start -->
-    <tr>
-      <td class="green" align="center">
-        <p><input type="submit" value="Submit" name="Submit"></p>
-      </td>
-    </tr>
-<!-- if-one-form-only-end@ -->
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-<!-- @if-one-form-only-start -->
-</form>
-<!-- if-one-form-only-end@ -->
-
-<script type="text/javascript">
-<!--
-
-if (document.getElementById) {
-    // alert("Netscape 6 or IE5");
-    document.getElementById("hide_from_header_param").disabled = !(document.getElementById("hide_from_header_mode_set").checked);
-    document.getElementById("hide_referrer_param").disabled = !(document.getElementById("hide_referrer_mode_set").checked);
-    document.getElementById("set_image_blocker_param").disabled = !(document.getElementById("set_image_blocker_mode_set").checked);
-
-    show_add_header_opts    (document.getElementById("add_header_y").checked);
-    show_deanimate_opts     (document.getElementById("deanimate_gifs_y").checked);
-    show_hide_from_header_opts(document.getElementById("hide_from_header_y").checked);
-    show_hide_referrer_opts (document.getElementById("hide_referrer_y").checked);
-    show_user_agent_opts    (document.getElementById("hide_user_agent_y").checked);
-    show_set_image_blocker_opts (document.getElementById("set_image_blocker_y").checked);
-    show_limit_connect_opts (document.getElementById("limit_connect_y").checked);
-    show_send_wafer_opts    (document.getElementById("send_wafer_y").checked);
-} else if (document.all) {
-    // alert("IE4");
-    document.myform.hide_from_header_param.disabled = !(document.myform.hide_from_header_mode_set.checked);
-    document.myform.hide_referrer_param.disabled = !(document.myform.hide_referrer_mode_set.checked);
-    document.myform.set_image_blocker_param.disabled = !(document.myform.set_image_blocker_mode_set.checked);
-
-    show_add_header_opts    (document.myform.add_header_y.checked);
-    show_deanimate_opts     (document.myform.deanimate_gifs_y.checked);
-    show_hide_from_header_opts (document.myform.hide_from_header_y.checked);
-    show_hide_referrer_opts (document.myform.hide_referrer_y.checked);
-    show_user_agent_opts    (document.myform.hide_user_agent_y.checked);
-    show_set_image_blocker_opts (document.myform.set_image_blocker_y.checked);
-    show_limit_connect_opts (document.myform.limit_connect_y.checked);
-    show_send_wafer_opts    (document.myform.send_wafer_y.checked);
-} else if (document.layers) {
-    // alert("Netscape 4");
-}
-//-->
-</script>
-
-
-</body>
-
-</html>
diff --git a/external/privoxy/templates/edit-actions-for-url-filter b/external/privoxy/templates/edit-actions-for-url-filter
deleted file mode 100644
index d4dad90..0000000
--- a/external/privoxy/templates/edit-actions-for-url-filter
+++ /dev/null
@@ -1,40 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-for-url-filter,v $
-#
-# Purpose     :  Template that is included from most of Privoxy's CGI pages
-#                to show the user how to get help or report problems.
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2002-2007 members of
-#                the SourceForge Privoxy team. http://www.privoxy.org/
-#
-#                This template is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-# Revisions   :
-#    $Log: edit-actions-for-url-filter,v $
-#    Revision 1.8  2007/03/29 11:40:34  fabiankeil
-#    Divide @filter-params@ into @client-header-filter-params@
-#    @content-filter-params@ and @server-header-filter-params@.
-#
-#    Revision 1.7  2007/03/20 15:40:00  fabiankeil
-#    Adjust to new world order with dedicated header-filter actions.
-#
-#
-##############################################################################
-
-<tr class="bg1" align="left" valign="top">
-  <td class="en1" align="center" valign="middle"><input type="radio" name="filter_r@index@" value="Y" @this-filter-y@></td>
-  <td class="dis1" align="center" valign="middle"><input type="radio" name="filter_r@index@" value="N" @this-filter-n@></td>
-  <td class="noc1" align="center" valign="middle"><input type="radio" name="filter_r@index@" value="X" @this-filter-x@></td>
-  <td class="action">
-    <input type="hidden" name="filter_t@index@" value="@abbr-filter-type@">
-    <input type="hidden" name="filter_n@index@" value="@name@">
-    <a href="@user-manual@@actions-help-prefix@@anchor@">@filter-type@</a> @name@
-  </td>
-  <td>@description@</td>
-</tr>
diff --git a/external/privoxy/templates/edit-actions-list b/external/privoxy/templates/edit-actions-list
deleted file mode 100644
index 85ec9b5..0000000
--- a/external/privoxy/templates/edit-actions-list
+++ /dev/null
@@ -1,412 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-list,v $
-#
-# Purpose     :  Template used to edit the actions file.
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-list,v $
-#    Revision 1.34  2007/05/21 10:54:46  fabiankeil
-#    - Use strlcpy() instead of strcpy().
-#    - Stop treating actions files special. Expect a complete file name
-#      (with or without path) like it's done for the rest of the files.
-#      Closes FR#588084.
-#    - Don't rerun sed() in cgi_show_request().
-#
-#    Revision 1.33  2007/04/08 13:21:06  fabiankeil
-#    Reference action files in CGI URLs by id instead
-#    of using the first part of the file name.
-#    Fixes BR 1694250 and BR 1590556.
-#
-#    Revision 1.32  2007/01/23 16:03:16  fabiankeil
-#    - Add favicon links.
-#    - Remove useless W3C validator links.
-#
-#    Revision 1.31  2006/09/10 14:39:24  hal9
-#    Fix typo + minor change.
-#
-#    Revision 1.30  2006/09/09 01:12:15  hal9
-#    Soften actions files update interval.
-#
-#    Revision 1.29  2006/07/18 14:49:13  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.26.2.4  2003/12/17 16:35:17  oes
-#    Work around new & silly MSIE behaviour where the request resulting from
-#    changing window.location.href doesn't reveal the referrer anymore
-#
-#    Revision 1.26.2.3  2002/09/25 15:34:09  oes
-#    - Work around JS problem in NS 2.0 (no joke)
-#    - Make JS string edit popup remove the pattern
-#      if edited to empty; make JS add popup do nothing
-#      if pattern empty.
-#
-#    Revision 1.26.2.2  2002/08/23 02:22:53  hal9
-#    Fix a perl brain fart with <li> in comments.
-#
-#    Revision 1.26  2002/05/23 23:37:25  oes
-#    Nit
-#
-#    Revision 1.25  2002/05/21 21:02:52  oes
-#    Added more help links
-#
-#    Revision 1.24  2002/05/21 19:11:40  oes
-#     - Added client-side JavaScript versions of edit and add URL forms
-#     - Moved jump targets to before container table cell
-#     - Let earu determine the jump target when removing URLs via JS
-#     - Fixed broken help link
-#
-#    Revision 1.23  2002/05/12 15:53:10  jongfoster
-#    Restoring CVS log information accidentally removed in
-#    my previous commit.
-#
-#    Revision 1.22  2002/05/12 15:45:33  jongfoster
-#    Applying [Patch 552094] New templates for edit-actions-list
-#    This cleans up the templates by:
-#    - Removing the (confusing) alternating color scheme.
-#    - Making everything left-justified.
-#
-#    Revision 1.21  2002/05/03 22:58:15  jongfoster
-#    Fixing link target in all URLs section
-#
-#    Revision 1.20  2002/04/26 12:57:18  oes
-#     - Central "button" link style in cgi-style.css
-#     - Help links now dynamic
-#
-#    Revision 1.19  2002/04/24 02:19:16  oes
-#     - Show name of actions file being edited
-#     - Show context sensitive help
-#     - Add buttons for easy changing of defaults
-#     - Cosmetics and clarifications
-#
-#    Revision 1.18  2002/04/18 19:21:09  jongfoster
-#    Added code to detect "conventional" action files, that start
-#    with a set of actions for all URLs (the pattern "/").
-#    These are special-cased in the "edit-actions-list" CGI, so
-#    that a special UI can be written for them.
-#
-#    Revision 1.17  2002/04/10 13:32:53  oes
-#    Made templates modular
-#
-#    Revision 1.16  2002/04/08 17:08:14  oes
-#    Cosmetic: make status in title lowercase
-#
-#    Revision 1.15  2002/04/05 16:01:32  oes
-#    Correct HTML, external Stylesheets, eye candy, some fixes
-#
-#    Revision 1.14  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.13  2002/03/24 15:23:33  jongfoster
-#    Name changes
-#
-#    Revision 1.12  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.11  2002/03/23 16:18:15  swa
-#    renamed every reference to the old name with foobar.
-#    fixed "application foobar application" tag, fixed
-#    "the foobar" with "foobar". left junkbuster in cvs
-#    comments and remarks to history untouched. should
-#    make final rename easier.
-#
-#    Revision 1.10  2002/03/16 15:22:19  jongfoster
-#    Moving 'alpha' warning to the end of the page
-#
-#    Revision 1.9  2002/03/05 00:24:51  jongfoster
-#    Patch to always edit the current actions file.
-#
-#    Revision 1.8  2002/03/03 10:29:12  swa
-#    point users to the right feedback forms,
-#    not necessarily the developer list.
-#
-#    Revision 1.7  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.6  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.5  2002/01/17 21:21:05  jongfoster
-#    DOS->Unix line endings
-#
-#    Revision 1.4  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-##############################################################################
-#
-# Browser support for the CSS on this page:
-#   MS Internet Explorer 5.5 - Yes - everything works.
-#   Netscape 6.2             - Yes - everything works.
-#   Netscape 4.75            - No  - CSS buttons look really bad, but they are
-#                                    usable.  Everything else works.
-#   Opera 5.12               - Yes - everything works.
-#   MS Internet Explorer 4+  - Untested
-#   MS IE 3.x, NS3.x         - Untested (Don't support CSS, so everything
-#                              should work, but will look ugly).
-#   Mozilla >=0.6            - Yes - everything works.
-#
-# All browsers should work, you just might not get the pretty CSS buttons.
-#
-# If your favorite browser isn't listed/tested, please test and add it.
-#
-#
-#############################################################################
-#
-# Standard support:
-#
-# This file currently produces valid HTML 4.01 Strict.
-#
-# If you change it, please save the generated page from your web browser
-# and then upload it to http://validator.w3.org/ for checking.
-#
-#############################################################################
-#
-# Available variables include:
-#
-# filename
-# ver
-#
-#
-#############################################################################
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-
-  <title>Privoxy: Edit actions file @actions-file@</title>
-
-  <style type="text/css">
-
-table.framed {
-  border: solid black 1px;
-  margin: 10px 0px;
-}
-tr.actions {
-  background-color: #eeffee;
-}
-tr.url {
-  background-color: #ddddff;
-}
-tr.adv {
-  background-color: #FFFFD0;
-}
-td.header {
-  font-weight: bold;
-  font-size: 110%;
-  padding: 10px 15px 2px 15px;
-}
-td.url {
-  font-weight: bold;
-}
-td.action {
-  font-weight: bold;
-  font-style: italic;
-  padding: 2px 30px;
-}
-td.nbr, td.buttons {
-  white-space: nowrap;
-}
-td.indentbuttons {
-  padding: 2px 30px;
-}
-</style>
-
-<script type="text/javascript">
-<!--
-
-// Non-JS capable browsers will follow the link to a HTML "are you sure?" page
-// JavaScript-capable browsers will call this function, which does a
-// client-side prompt for speed.  It may kick off the delete directly.
-// It always returns false to cancel following the link.
-function rm_p(link,pattern,curtext)
-{
-   if (window.confirm("Are you sure you want to delete this URL pattern?\nPattern is: "+unescape(curtext)))
-   {
-      link.href="edit-actions-remove-url?f=@f@&v=@v@&p="+pattern;
-      return true;
-   }
-   return false;
-}
-
-function e_p(link,pattern,curtext)
-{
-   if ((newtext=window.prompt("Edit the pattern to your needs:", unescape(curtext))) != null)
-   {
-      if (newtext != "")
-      { link.href="edit-actions-url?f=@f@&v=@v@&p="+pattern+"&u="+escape(newtext); }
-      else
-      { link.href="edit-actions-remove-url?f=@f@&v=@v@&p="+pattern; }
-      return true;
-   }
-   return false;
-}
-
-function a_p(link,section)
-{
-   if (((newtext=window.prompt("Enter the new pattern:", "")) != null ) && (newtext != ""))
-   {
-      link.href="edit-actions-add-url?f=@f@&v=@v@&s="+section+"&u="+escape(newtext);
-      return true;
-   }
-   return false;
-}
-//-->
-</script>
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="info">
-	<h2>What is all this?</h2>
-        <p>
-         If you haven't already done so, it is <b>strongly recommended</b> that you at 
-         least skim <a href="@user-manual@@actions-help-prefix@ACTIONS-FILE">the
-         chapter on actions files</a> in the <a href="@user-manual@">User Manual</a>
-         before making any changes. You will also find a comprehensive list of
-         all available actions there, as well how the settings on this page
-         work.
-        </p>
-         <!-- @if-all-urls-present-then@ -->
-        <p>
-         Please note that <b>the first section has special importance</b>. It sets the default actions for
-         all URLs. The resulting actions for a particular URL may differ from these defaults if that
-         URL matches again further down, but this section is largely responsible for your browsing
-         experience. Edit manually with great care, or choose from the predefined sets of actions.
-        </p>
-        <!-- @else-not-all-urls-present@@endif-all-urls-present@ -->
-        <!-- @if-default-action-then@ -->
-        <p>
-         This is the default action file. Updates for it are available from
-         <a href="http://www.privoxy.org/";>Privoxy.org</a> from time to time. 
-         It is therefore <b>not recommended</b> that you add your private
-         rules here, since they will be lost if you install an update in the future.
-         Put your rules in a separate actions file, like <tt>user.action</tt> instead.
-        </p>
-        <!-- @else-not-default-action@@endif-default-action@ -->
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <div class="buttons">
-          <h2>Editing Actions File @actions-file@</h2>
-          <!-- @if-all-urls-present-then@@else-not-all-urls-present@ -->
-          <p><a class="cmd" href="edit-actions-section-add?f=@f@&amp;v=@v@&amp;s=0">Insert new section at top</a></p>
-          <!-- @endif-all-urls-present@ -->
-        </div>
-      </td>
-    </tr>
-
-    <!-- @if-all-urls-present-then@ -->
-    <tr>
-      <td class="container"><a name="l@all-urls-s@"></a>
-        <table border="0" width="100%" cellspacing="2" cellpadding="3" class="framed">
-          <tr class="actions"><td class="header"><a href="@user-manual@@actions-help-prefix@ACTIONS">Actions</a>:</td></tr>
-          <tr class="actions">
-            <td class="indentbuttons">
-              <a href="eafu?f=@f@&amp;v=@v@&amp;s=@all-urls-s@">Edit</a>
-              @all-urls-buttons@
-            </td>
-          </tr>
-          <tr class="actions"><td class="action">@all-urls-actions@</td></tr>
-          <tr class="url"><td class="header"><a href="@user-manual@@actions-help-prefix@AF-PATTERNS">URL patterns</a>:</td></tr>
-          <tr class="url"><td class="indentbuttons">/ &nbsp; <i>(Matches all requests)</a></td></tr>
-          <tr class="adv"><td class="header">Advanced:</td></tr>
-          <tr class="adv">
-            <td class="indentbuttons">
-              <a href="easa?f=@f@&amp;v=@v@&amp;s=@all-urls-s@#l@all-urls-s-next@">Insert new section below</a>
-            </td>
-          </tr>
-        </table>
-      </td>
-    </tr>
-    <!-- @else-not-all-urls-present@@endif-all-urls-present@ -->
-
-@sections@
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-</body>
-
-</html>
diff --git a/external/privoxy/templates/edit-actions-list-button b/external/privoxy/templates/edit-actions-list-button
deleted file mode 100644
index fd0e8b9..0000000
--- a/external/privoxy/templates/edit-actions-list-button
+++ /dev/null
@@ -1,49 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-list-button,v $
-#
-# Purpose     :  Template which forms part of edit-actions-list
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-list-button,v $
-#    Revision 1.3  2002/05/12 15:53:10  jongfoster
-#    Restoring CVS log information accidentally removed in
-#    my previous commit.
-#
-#    Revision 1.2  2002/05/12 15:45:33  jongfoster
-#    Applying [Patch 552094] New templates for edit-actions-list
-#    This cleans up the templates by:
-#    - Removing the (confusing) alternating color scheme.
-#    - Making everything left-justified.
-#
-#    Revision 1.1  2002/05/03 23:00:38  jongfoster
-#    Support for templates for "standard actions" buttons.
-#    See bug #549871
-#
-#############################################################################
- &nbsp; <a href="eas?f=@f@&amp;v=@v@&amp;s=@all-urls-s@&amp;p=@button-name@#l@all-urls-s@">Set to @button-name@</a>
diff --git a/external/privoxy/templates/edit-actions-list-section b/external/privoxy/templates/edit-actions-list-section
deleted file mode 100644
index c8578ad..0000000
--- a/external/privoxy/templates/edit-actions-list-section
+++ /dev/null
@@ -1,125 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-list-section,v $
-#
-# Purpose     :  Template which forms part of edit-actions-list
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-list-section,v $
-#    Revision 1.16  2006/07/18 14:49:13  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.15.2.1  2003/12/17 16:35:17  oes
-#    Work around new & silly MSIE behaviour where the request resulting from
-#    changing window.location.href doesn't reveal the referrer anymore
-#
-#    Revision 1.15  2002/05/21 21:02:52  oes
-#    Added more help links
-#
-#    Revision 1.14  2002/05/21 19:12:43  oes
-#     - Added client-side JavaScript versions of edit and add URL forms
-#     - Moved jump targets to before container table cell
-#
-#    Revision 1.13  2002/05/12 15:45:33  jongfoster
-#    Applying [Patch 552094] New templates for edit-actions-list
-#    This cleans up the templates by:
-#    - Removing the (confusing) alternating color scheme.
-#    - Making everything left-justified.
-#
-#    Revision 1.12  2002/04/26 12:58:11  oes
-#    Central "button" link style in cgi-style.css
-#
-#    Revision 1.11  2002/04/24 02:14:03  oes
-#    Changed shortcuts, Cosmetics
-#
-#    Revision 1.10  2002/04/17 21:27:26  jongfoster
-#    Adding #linenumber to the URLs which affect blocks, to make
-#    editing in long files easier.
-#
-#    Revision 1.9  2002/04/17 15:51:47  oes
-#    Args! Restoring CVS history
-#
-#    Revision 1.8  2002/04/17 15:04:16  oes
-#    Adapted to style change
-#
-#    Revision 1.7  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.6  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.5  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.4  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.3  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-#############################################################################
-#
-# Available variables include:
-#
-# filename
-# ver
-# sectionid
-# urls
-#
-#############################################################################
-#
-# ** Important note: **
-#
-# It is important to keep this file small.  That's why all the
-# identifiers in the HTML are short and cryptic.  Currently, the main
-# edit-actions page is ~300k.  Before it was optimized, it was ~550k.
-#
-#############################################################################
-
-<tr><td class="container"><a name="l@s@"></a>
-<table border="0" width="100%" cellspacing="2" cellpadding="3" class="framed">
-<tr class="actions"><td class="header"><a href="@user-manual@@actions-help-prefix@ACTIONS">Actions</a>:</td></tr>
-<tr class="actions"><td class="indentbuttons"><a href="eafu?f=@f@&amp;v=@v@&amp;s=@s@">Edit</a></td></tr>
-<tr class="actions"><td class="action">@actions@</td></tr>
-<tr class="url"><td class="header"><a href="@user-manual@@actions-help-prefix@AF-PATTERNS">URL patterns</a>:</td></tr>
-<tr class="url"><td class="indentbuttons"><a href="eaa?f=@f@&amp;v=@v@&amp;s=@s@" onclick="return a_p(this,@s@);">Add</a></td></tr>
-@urls@
-<tr class="adv"><td class="header">Advanced:</td></tr>
-<tr class="adv"><td class="indentbuttons">
-@if-s-prev-exists-start@<a href="eass?f=@f@&amp;v=@v@&amp;s1=@s-prev@&amp;s2=@s@#l@s-prev@">Move section up</a> &nbsp; @if-s-prev-exists-end@
-@if-s-next-exists-start@<a href="eass?f=@f@&amp;v=@v@&amp;s1=@s@&amp;s2=@s-next@#l@s@">Move section down</a> &nbsp; @if-s-next-exists-end@
-<a href="easa?f=@f@&amp;v=@v@&amp;s=@s@#l@s-next@">Insert new section below</a>
-@if-empty-section-start@ &nbsp; <a href="easr?f=@f@&amp;v=@v@&amp;s=@s@#l@s@">Delete whole section</a>@if-empty-section-end@
-</td></tr>
-</table>
-</td></tr>
diff --git a/external/privoxy/templates/edit-actions-list-url b/external/privoxy/templates/edit-actions-list-url
deleted file mode 100644
index 08c1ea4..0000000
--- a/external/privoxy/templates/edit-actions-list-url
+++ /dev/null
@@ -1,95 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-list-url,v $
-#
-# Purpose     :  Template which forms part of edit-actions-list
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-list-url,v $
-#    Revision 1.11  2006/07/18 14:49:14  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.10.2.1  2003/12/17 16:35:17  oes
-#    Work around new & silly MSIE behaviour where the request resulting from
-#    changing window.location.href doesn't reveal the referrer anymore
-#
-#    Revision 1.10  2002/05/21 19:13:14  oes
-#    Added client-side JavaScript versions of edit and add URL forms
-#
-#    Revision 1.9  2002/05/12 15:45:33  jongfoster
-#    Applying [Patch 552094] New templates for edit-actions-list
-#    This cleans up the templates by:
-#    - Removing the (confusing) alternating color scheme.
-#    - Making everything left-justified.
-#
-#    Revision 1.8  2002/04/26 12:58:11  oes
-#    Central "button" link style in cgi-style.css
-#
-#    Revision 1.7  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.6  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.5  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.4  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.3  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-#############################################################################
-#
-# Available variables include:
-#
-# filename
-# ver
-# sectionid
-# urls
-#
-#############################################################################
-#
-# ** Important note: **
-#
-# It is *extremely* important to keep this file small.  That's why all the
-# identifiers in the HTML are short and cryptic.  Currently, the main
-# edit-actions page is ~300k.  Before it was optimized, it was ~550k.
-#
-#############################################################################
-<tr class="url" valign="top">
-<td class="indentbuttons"><a name="l@p@"
-href="ear?f=@f@&amp;v=@v@&amp;p=@p@" onclick="return rm_p(this, @p@,'@url@');">Remove</a>&nbsp;&nbsp;&nbsp;<a
-href="eau?f=@f@&amp;v=@v@&amp;p=@p@" onclick="return  e_p(this, @p@,'@url@');">Edit</a>&nbsp; @url-html@</td>
-</tr>
diff --git a/external/privoxy/templates/edit-actions-remove-url-form b/external/privoxy/templates/edit-actions-remove-url-form
deleted file mode 100644
index 17b9b22..0000000
--- a/external/privoxy/templates/edit-actions-remove-url-form
+++ /dev/null
@@ -1,196 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-remove-url-form,v $
-#
-# Purpose     :  Template used to confirm removal of a particular URL
-#                pattern from an actions file.  Only used on browsers that
-#                don't support JavaScript.
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-remove-url-form,v $
-#    Revision 1.17  2007/01/23 16:03:16  fabiankeil
-#    - Add favicon links.
-#    - Remove useless W3C validator links.
-#
-#    Revision 1.16  2006/07/18 14:49:14  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.14.2.2  2002/08/23 02:22:53  hal9
-#    Fix a perl brain fart with <li> in comments.
-#
-#    Revision 1.14  2002/05/21 19:13:49  oes
-#    Added button style and jumptargets to "add" and "cancel" links
-#
-#    Revision 1.13  2002/04/10 13:32:53  oes
-#    Made templates modular
-#
-#    Revision 1.12  2002/04/08 17:08:14  oes
-#    Cosmetic: make status in title lowercase
-#
-#    Revision 1.11  2002/04/05 16:01:30  oes
-#    Correct HTML, external Stylesheets, eye candy, some fixes
-#
-#    Revision 1.10  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.9  2002/03/24 15:23:33  jongfoster
-#    Name changes
-#
-#    Revision 1.8  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.7  2002/03/23 16:18:15  swa
-#    renamed every reference to the old name with foobar.
-#    fixed "application foobar application" tag, fixed
-#    "the foobar" with "foobar". left junkbuster in cvs
-#    comments and remarks to history untouched. should
-#    make final rename easier.
-#
-#    Revision 1.6  2002/03/16 15:22:19  jongfoster
-#    Moving 'alpha' warning to the end of the page
-#
-#    Revision 1.5  2002/03/03 10:29:12  swa
-#    point users to the right feedback forms,
-#    not necessarily the developer list.
-#
-#    Revision 1.4  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.3  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.2  2002/01/17 21:21:05  jongfoster
-#    DOS->Unix line endings
-#
-#    Revision 1.1  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-##############################################################################
-#
-# Standard support:
-#
-# This file currently produces valid HTML 4.01 Strict.
-#
-# If you change it, please save the generated page from your web browser
-# and then upload it to http://validator.w3.org/ for checking.
-#
-#############################################################################
-#
-# Available variables include:
-#
-# filename
-# ver
-# section
-# pattern
-# oldval
-# jumptarget - append to eal URL to jump to relevant section
-#
-#############################################################################
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-
-  <title>Privoxy@@my-hostname@: Remove URL Pattern</title>
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Remove URL Pattern</h2>
-        <p>Are you sure you want to delete this URL pattern?  The pattern is:</p>
-        <p class="important">@u@</p>
-        <p>
-          <a class="cmd" href="edit-actions-remove-url?f=@f@&amp;v=@v@&amp;p=@p@">OK</a>
-          &nbsp;
-          <a class="cmd" href="edit-actions-list?f=@f@@jumptarget@">Cancel</a>
-        </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-</body>
-
-</html>
diff --git a/external/privoxy/templates/edit-actions-url-form b/external/privoxy/templates/edit-actions-url-form
deleted file mode 100644
index 0b91035..0000000
--- a/external/privoxy/templates/edit-actions-url-form
+++ /dev/null
@@ -1,219 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/edit-actions-url-form,v $
-#
-# Purpose     :  Template used to edit a URL pattern in an actions file.
-#
-#
-# Copyright   :  Written by and Copyright (C) 2001 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                Original Author: Copyright (C) 2001 Jonathan Foster
-#                http://www.jon-foster.co.uk/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: edit-actions-url-form,v $
-#    Revision 1.18  2007/12/08 14:38:55  fabiankeil
-#    - Use the shiny new CSS "pattern" class.
-#    - s@URL Pattern@URL or TAG Pattern@
-#    - Use the standard favicon as this ain't no error page.
-#
-#    Revision 1.17  2007/01/23 16:03:16  fabiankeil
-#    - Add favicon links.
-#    - Remove useless W3C validator links.
-#
-#    Revision 1.16  2006/07/18 14:49:14  david__schmidt
-#    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-#    with what was really the latest development (the v_3_0_branch branch)
-#
-#    Revision 1.14.2.2  2002/08/23 02:22:53  hal9
-#    Fix a perl brain fart with <li> in comments.
-#
-#    Revision 1.14  2002/05/21 19:14:10  oes
-#    Added button style and jumptarget "cancel" link
-#
-#    Revision 1.13  2002/04/10 13:32:53  oes
-#    Made templates modular
-#
-#    Revision 1.12  2002/04/08 17:08:14  oes
-#    Cosmetic: make status in title lowercase
-#
-#    Revision 1.11  2002/04/05 16:01:32  oes
-#    Correct HTML, external Stylesheets, eye candy, some fixes
-#
-#    Revision 1.10  2002/03/26 22:29:56  swa
-#    we have a new homepage!
-#
-#    Revision 1.9  2002/03/24 15:23:33  jongfoster
-#    Name changes
-#
-#    Revision 1.8  2002/03/24 11:01:06  swa
-#    name change
-#
-#    Revision 1.7  2002/03/23 16:18:15  swa
-#    renamed every reference to the old name with foobar.
-#    fixed "application foobar application" tag, fixed
-#    "the foobar" with "foobar". left junkbuster in cvs
-#    comments and remarks to history untouched. should
-#    make final rename easier.
-#
-#    Revision 1.6  2002/03/16 15:22:19  jongfoster
-#    Moving 'alpha' warning to the end of the page
-#
-#    Revision 1.5  2002/03/03 10:29:13  swa
-#    point users to the right feedback forms,
-#    not necessarily the developer list.
-#
-#    Revision 1.4  2002/01/23 00:26:45  jongfoster
-#    Reducing length of URLs
-#    Where encoded and unencoded versions of a string existed, removing
-#    the unencoded one.
-#
-#    Revision 1.3  2002/01/17 21:33:00  jongfoster
-#    Replacing all references to the URL of the config interface
-#    with @default-cgi@
-#
-#    Revision 1.2  2002/01/17 21:21:05  jongfoster
-#    DOS->Unix line endings
-#
-#    Revision 1.1  2001/11/13 00:58:18  jongfoster
-#    New version of actions file editor templates
-#
-#
-##############################################################################
-#
-# Standard support:
-#
-# This file currently produces valid HTML 4.01 Strict.
-#
-# If you change it, please save the generated page from your web browser
-# and then upload it to http://validator.w3.org/ for checking.
-#
-#############################################################################
-#
-# Available variables include:
-#
-# f - filename
-# v - version
-# s - section
-# p - pattern
-# u - old value of URL
-# jumptarget - append to eal URL to jump to relevant section
-#
-#############################################################################
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx">
-
-  <title>Privoxy@@my-hostname@: Edit URL Pattern</title>
-
-  <script type="text/javascript">
-<!--
-function validate(text)
-{
-  if (text=="")
-  {
-    alert("You need to type a pattern in order to continue!");
-    return false;
-  }
-
-  return true;
-}
-//-->
-  </script>
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Edit URL or TAG Pattern</h2>
-        <form method="GET" action="edit-actions-url"
-              onSubmit="return validate(u.value);">
-          <p>
-            <input type="hidden" name="f" value="@f@">
-            <input type="hidden" name="v" value="@v@">
-            <input type="hidden" name="p" value="@p@">
-            <input type="text" name="u" value="@u@" size="78" class="pattern"><br>
-            <input type="submit" value="Submit"> &nbsp;
-            <input type="reset" value="Reset"> &nbsp;
-            <a class="cmd" href="edit-actions-list?f=@f@@jumptarget@">Cancel</a>
-          </p>
-        </form>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-</body>
-
-</html>
diff --git a/external/privoxy/templates/forwarding-failed b/external/privoxy/templates/forwarding-failed
deleted file mode 100644
index fca5c8c..0000000
--- a/external/privoxy/templates/forwarding-failed
+++ /dev/null
@@ -1,167 +0,0 @@
-##########################################################
-#
-# Forwarding-failed template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written in plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  gateway
-#    The IP or hostname of the forwarding server
-#  hostport:
-#    The host and port part of the request that lead to this problem
-#  path:
-#    The path part of the request that lead to this problem
-#  error-message:
-#    The failure reason.
-#  forwarding-type:
-#    The type of the forwarding request: "socks4-", "socks4a-"
-#    or (in the future) "" for direct connections to the forwarder.
-#
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>503 - Forwarding failure (Privoxy@@my-hostname@)</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-  <style type="text/css">
-#include cgi-style.css
-  </style>
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="status">
-        503
-      </td>     
-      <td class="title" style="width: 100%">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning" colspan="2">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning" colspan=2>
-        <h2>Forwarding failure</h2>
-          <p>Privoxy was unable to <b>@forwarding-type@forward</b> your request
-             <a  title="Repeat the request"
-              href="@protocol@@hostport@@path@"><b>@protocol@@hostport@@path@</b></a>
-             through <b>@gateway@</b>:
-            <strong>@error-message@</strong></p>
-          </p>
-          <p>Just <a title="Repeat the request" href="@protocol@@hostport@@path@">try again</a> to
-             see if this is a temporary problem, or check your <a title="Privoxy's show-status page"
-              href="@default-cgi@show-status">forwarding settings</a>
-             and make sure that all forwarding servers are working correctly and
-             listening where they are supposed to be listening.
-         </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box" colspan="2">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/mod-local-help b/external/privoxy/templates/mod-local-help
deleted file mode 100644
index 21d6596..0000000
--- a/external/privoxy/templates/mod-local-help
+++ /dev/null
@@ -1,12 +0,0 @@
-        <h2>Local Privoxy support:</h2>
-
-<!-- @if-have-proxy-info-start -->
-        <p>You can consult the <a href="@proxy-info-url@">online documentation</a> for more information about this Privoxy installation.</p>        
-<!-- if-have-proxy-info-end@ -->
-
-<!-- @if-have-adminaddr-info-start -->
-        <p>Address e-mail questions about this service to
-          <a href="mailto:@admin-address@";><code>@admin-address@</code></a>,
-          who will be glad to help you.
-        </p>
-<!-- if-have-adminaddr-info-end@ -->
diff --git a/external/privoxy/templates/mod-support-and-service b/external/privoxy/templates/mod-support-and-service
deleted file mode 100644
index 9868761..0000000
--- a/external/privoxy/templates/mod-support-and-service
+++ /dev/null
@@ -1,61 +0,0 @@
-##############################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/mod-support-and-service,v $
-#
-# Purpose     :  Template that is included from most of Privoxy's CGI pages
-#                to show the user how to get help or report problems.
-# 
-#
-# Copyright   :  Written by and Copyright (C) 2002-2007 members of
-#                the SourceForge Privoxy team. http://www.privoxy.org/
-#
-#                This template is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-# Revisions   :
-#    $Log: mod-support-and-service,v $
-#    Revision 1.11  2008/01/02 18:06:58  fabiankeil
-#    Instead of linking to the "Contacting the developers ..." section
-#    in the FAQ, use the one from the User Manual. The latter can be
-#    delivered by Privoxy and thus possibly loads faster.
-#
-#    Revision 1.10  2007/03/17 11:31:36  fabiankeil
-#    - Add revision log and copyright header.
-#    - Reword instructions and link to the FAQ
-#      in an attempt to reduce the number of
-#      incomplete reports.
-#
-##############################################################################
-       <h2>Support and Service:</h2>
-        <p>
-          The Privoxy Team values your feedback. To provide you with the best support,
-          we ask that you:
-        </p>
-        <ul>
-          <li>
-            use the <a href="http://sourceforge.net/tracker/?group_id=11118&amp;atid=211118";>Support Tracker</a>
-            if you need help.
-          </li>
-          <li>
-            submit ads and configuration related problems with the actions files through the
-            <a href="http://sourceforge.net/tracker/?group_id=11118&amp;atid=460288";>Actionsfile Feedback Tracker</a>.
-          </li>
-          <li>
-            submit bugs only through the
-            <a href="http://sourceforge.net/tracker/?group_id=11118&amp;atid=111118";>Bug Tracker</a>.
-            Please make sure that the bug has not been submitted yet.
-          </li>
-          <li>
-            submit feature requests only through the
-            <a href="http://sourceforge.net/tracker/?atid=361118&amp;group_id=11118&amp;func=browse";>Feature
-            Request Tracker</a>.
-          </li>
-          <li>
-            read the <a title="Contacting the developers, Bug Reporting and Feature Requests"
-             href="@user-manual@xxxxxxxxxxxx">instructions in the User Manual</a>
-            to make sure your request contains all the information we need.
-          </li>
-        </ul>
diff --git a/external/privoxy/templates/mod-title b/external/privoxy/templates/mod-title
deleted file mode 100644
index de73eba..0000000
--- a/external/privoxy/templates/mod-title
+++ /dev/null
@@ -1,4 +0,0 @@
-        <h1>
-          This is <a href="@homepage@">Privoxy</a> @version@ on @my-hostname@ (@my-ip-address@), port @my-port@<!-- @if-can-toggle-start -->,
-          @if-enabled-display-then@enabled@else-not-enabled-display@disabled@endif-enabled-display@<!-- if-can-toggle-end@ -->
-        </h1>
diff --git a/external/privoxy/templates/mod-unstable-warning b/external/privoxy/templates/mod-unstable-warning
deleted file mode 100644
index dd77c29..0000000
--- a/external/privoxy/templates/mod-unstable-warning
+++ /dev/null
@@ -1,7 +0,0 @@
-        <h2>Warning:</h2>
-        <p>
-          <strong>This Privoxy version is based on <em class="warning">@code-status@</em> code and
-          not intended for production systems!
-          <br>Use at your own risk. See the <a title="GNU General Public License version 2"
-          href="http://www.gnu.org/licenses/old-licenses/gpl-2.0.html";>license</a> for details.</strong>
-        </p>
diff --git a/external/privoxy/templates/no-such-domain b/external/privoxy/templates/no-such-domain
deleted file mode 100644
index 08cf5da..0000000
--- a/external/privoxy/templates/no-such-domain
+++ /dev/null
@@ -1,158 +0,0 @@
-##########################################################
-#
-# No-Such-Domain Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the proxy's administrator, as configured
-#    in the 'config' file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  host:
-#    The host part of the request that lead to this problem
-#  hostport:
-#    The host and port part of the request that lead to this problem
-#  path:
-#    The path part of the request that lead to this problem
-#  proxy-info-url:
-#    The URL to local online Privoxy documentation, if define in the
-#    'config' file
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>404 - No such Domain (Privoxy@@my-hostname@)</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-  <style type="text/css">
-#include cgi-style.css
-  </style>
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="status">
-        404
-      </td>     
-      <td class="title" style="width: 100%">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning" colspan="2">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning" colspan="2">
-        <h2>No such domain</h2>
-          <p>Your request for <a href="@protocol@@hostport@@path@"><b>@protocol@@hostport@@path@</b></a>
-            could not be fulfilled, because the domain name <b>@host@</b> could not be resolved.
-          </p>
-          <p>This is often a temporary failure, so you might just
-            <a href="@protocol@@hostport@@path@">try again</a>.
-         </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box" colspan="2">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-    
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/show-request b/external/privoxy/templates/show-request
deleted file mode 100644
index 30a2529..0000000
--- a/external/privoxy/templates/show-request
+++ /dev/null
@@ -1,154 +0,0 @@
-##########################################################
-#
-# Show-Request-CGI Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#  client-request:
-#    The request and headers that the client sent.
-#  processed-request:
-#    What we would have rewritten this request to, if this had not
-#    been intercepted.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy@@my-hostname@</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-	<h2>Show-Request</h2>
-          <p>
-            Here you see the original headers that your client sent when requesting this page, along with
-            the headers that Privoxy would have sent to the remote server if this request hadn't been
-            intercepted. 
-          </p>
-
-        <h3>Original Client Request:</h3>
-        <pre>@client-request@</pre>
-
-        <h3>Processed Request:</h3>
-       <pre>@processed-request@</pre>
-
-      </td>
-    </tr>
-
-     <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/show-status b/external/privoxy/templates/show-status
deleted file mode 100644
index f71e2de..0000000
--- a/external/privoxy/templates/show-status
+++ /dev/null
@@ -1,343 +0,0 @@
-##########################################################
-#
-# Show-Status-CGI Output template for Privoxy.
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach Privoxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the Privoxy administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of Privoxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The Privoxy version number
-#  code-status:
-#    The Privoxy development status: "alpha", "beta", or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  redirect-url:
-#    The URL to a script that will redirect to the Privoxy
-#    documentation for a given item  
-#  invocation:
-#    The command line with which Privoxy was invoked
-#  options:
-#    The options read from the configfile, linked to their
-#    explanations, plus warnings if parsing acl or forward
-#    statements produced errors.
-#  sourceversions:
-#    A HTML-formatted list of the individual source file cvs versions
-#  defines:
-#    A HTML-formatted list of all conditional #defines used when
-#    Privoxy was compiled
-#
-#  
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    This is an alpha or beta Privoxy release
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for Privoxy's online documentation has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  statistics:
-#    Privoxy was compiled with statistics support
-#  have-stats:
-#    There have been previous requests and statistics have
-#    been collected. In this case, the following symbols
-#    are available:
-#    requests-received:
-#      The number of requests received so far
-#    requests-blocked:
-#      The number of request blocked so far
-#    percent-blocked:
-#      The percentage of blocked requests
-#  have-no-stats:
-#    There haven't any statistics been collected yet
-#  pcrs-support:
-#    Privoxy was compiled with pcrs support
-#  trust-support:
-#    Privoxy was compiled with trust support
-#  actions-filenames:
-#    The path to the actions files.
-#  re-filter-filenames:
-#    The path to the re_filter files. Only available if
-#    pcrs-support is set
-#  trust-filename:
-#    The path to the trust file. Only available if
-#    trust-support is set
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy@@my-hostname@: Proxy Status</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>The following files are in use:</h2>
-        <table summary="Action, filter and trust files in use." class="transparent">
-          <tr>
-            <th colspan="2"><a href="@user-manual@@actions-help-prefix@ACTIONS-FILE">Actions Files:</a></th>
-          </tr>
-            @actions-filenames@
-          <tr>
-            <th colspan="2"><a href="@user-manual@xxxxxxxxxxxxxxxx">Filter Files:</a></th>
-          </tr>
-            @re-filter-filenames@
-<!-- @if-trust-support-start -->
-          <tr>
-            <th colspan="2"><a href="@user-manual@xxxxxxxxxxx#TRUSTFILE">Trust File:</a></th>
-          </tr>
-          <tr>
-            <td>
-              @trust-filename@
-            </td>
-            <td class="buttons">
-              <!-- @if-have-trustfile-start -->
-              <a href="show-status?file=trust">View</a>
-              <!-- if-have-trustfile-end@ -->
-            </td>
-          </tr>
-<!-- if-trust-support-end@ -->
-        </table>
-<!-- @if-cgi-editor-is-disabled-start -->
-        <p>
-          The CGI editor is currently disabled, thus no edit buttons are shown.<br>
-          Please have a look at the
-           <a href="@user-manual@xxxxxxxxxxx#ENABLE-EDIT-ACTIONS">enable-edit-actions documentation</a>
-          to learn how to enable it and what the risks are.
-        </p>
-<!--  if-cgi-editor-is-disabled-end@ -->
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>Privoxy was <a href="@user-manual@xxxxxxxxxxxx#CMDOPTIONS">invoked</a> as follows:</h2>
-        <p>@invocation@</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>The following options were given in the <a href="@user-manual@xxxxxxxxxxx">config file</a>:</h2>
-        <p>@options@</p>
-      </td>
-    </tr>
-
-<!-- @if-statistics-start -->
-    <tr>
-      <td class="box">
-        <h2>Blocking Statistics:</h2>
-        <p>
-  <!-- @if-have-stats-start -->
-          @requests-blocked@ out of @requests-received@ requests have been blocked,
-          which equals a block rate of @percent-blocked@%.
-<!-- if-have-stats-end@ -->
-<!-- @if-have-no-stats-start -->
-          There haven't been any requests so far.
-<!-- if-have-no-stats-end@ -->
-        </p>                                   
-      </td>
-    </tr>
-<!-- if-statistics-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Conditional #defines:</h2>
-          <table summary="The state of some ./configure options and what they do." border="1" style="margin-left: 10px">
-            <tr> 
-              <th>#define</th> <th>Enabled?</th> <th>Effects when enabled</th>
-            </tr>
-            <tr>
-              <td><code>FEATURE_ACL</code></td>
-              <td>@if-FEATURE_ACL-then@ Yes @else-not-FEATURE_ACL@ No @endif-FEATURE_ACL@</td>
-              <td>Allows the use of an ACL to control access to Privoxy by IP address.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_CGI_EDIT_ACTIONS</code></td>
-              <td>@if-FEATURE_CGI_EDIT_ACTIONS-then@ Yes @else-not-FEATURE_CGI_EDIT_ACTIONS@ No @endif-FEATURE_CGI_EDIT_ACTIONS@</td>
-              <td>Allows the use of the @if-FEATURE_CGI_EDIT_ACTIONS-then@<a
-                 href="@default-cgi@edit-actions">@else-not-FEATURE_CGI_EDIT_ACTIONS@
-                 @endif-FEATURE_CGI_EDIT_ACTIONS@web-based actions file
-                 editor@if-FEATURE_CGI_EDIT_ACTIONS-then@</a>@else-not-FEATURE_CGI_EDIT_ACTIONS@@endif-FEATURE_CGI_EDIT_ACTIONS@.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_CONNECTION_KEEP_ALIVE</code></td>
-              <td>@if-FEATURE_CONNECTION_KEEP_ALIVE-then@ Yes @else-not-FEATURE_CONNECTION_KEEP_ALIVE@ No @endif-FEATURE_CONNECTION_KEEP_ALIVE@</td>
-              <td>
-               Allows to reuse outgoing connections if the server supports it.
-               Requires the keep-alive-timeout config directive to be set.
-              </td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_FAST_REDIRECTS</code></td>
-              <td>@if-FEATURE_FAST_REDIRECTS-then@ Yes @else-not-FEATURE_FAST_REDIRECTS@ No @endif-FEATURE_FAST_REDIRECTS@</td>
-              <td>Allows the +fast-redirects action, to bypass redirect and logging scripts.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_FORCE_LOAD</code></td>
-              <td>@if-FEATURE_FORCE_LOAD-then@ Yes @else-not-FEATURE_FORCE_LOAD@ No @endif-FEATURE_FORCE_LOAD@</td>
-              <td>Allows bypassing all filtering for a single page using the prefix
-                  <q><code>@FORCE_PREFIX@</code></q>.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_GRACEFUL_TERMINATION</code></td>
-              <td>@if-FEATURE_GRACEFUL_TERMINATION-then@ Yes @else-not-FEATURE_GRACEFUL_TERMINATION@ No @endif-FEATURE_GRACEFUL_TERMINATION@</td>
-              <td>Allows to shutdown Privoxy through the web interface.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_IMAGE_BLOCKING</code></td>
-              <td>@if-FEATURE_IMAGE_BLOCKING-then@ Yes @else-not-FEATURE_IMAGE_BLOCKING@ No @endif-FEATURE_IMAGE_BLOCKING@</td>
-              <td>Allows the +handle-as-image action, to send <q>blocked</q> images instead of HTML.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_IMAGE_DETECT_MSIE</code></td>
-              <td>@if-FEATURE_IMAGE_DETECT_MSIE-then@ Yes @else-not-FEATURE_IMAGE_DETECT_MSIE@ No @endif-FEATURE_IMAGE_DETECT_MSIE@</td>
-              <td>Enables automatic detection of image and HTML requests from
-               Microsoft Internet Explorer users, overriding the setting of 
-               +image in the actions file.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_NO_GIFS</code></td>
-              <td>@if-FEATURE_NO_GIFS-then@ Yes @else-not-FEATURE_NO_GIFS@ No @endif-FEATURE_NO_GIFS@</td>
-              <td>Use PNG instead of GIF for the built-in images.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_PTHREAD</code></td>
-              <td>@if-FEATURE_PTHREAD-then@ Yes @else-not-FEATURE_PTHREAD@ No @endif-FEATURE_PTHREAD@</td>
-              <td>Use POSIX threads rather than native threads</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_STATISTICS</code></td>
-              <td>@if-FEATURE_STATISTICS-then@ Yes @else-not-FEATURE_STATISTICS@ No @endif-FEATURE_STATISTICS@</td>
-              <td>Enables the statistics function.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_TOGGLE</code></td>
-              <td>@if-FEATURE_TOGGLE-then@ Yes @else-not-FEATURE_TOGGLE@ No @endif-FEATURE_TOGGLE@</td>
-              <td>Allow Privoxy to be <q>disabled</q> so it is just a normal non-blocking non-anonymizing proxy.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_TRUST</code></td>
-              <td>@if-FEATURE_TRUST-then@ Yes @else-not-FEATURE_TRUST@ No @endif-FEATURE_TRUST@</td>
-              <td>Allows the use of trust files.</td>
-            </tr>
-            <tr>
-              <td><code>FEATURE_ZLIB</code></td>
-              <td>@if-FEATURE_ZLIB-then@ Yes @else-not-FEATURE_ZLIB@ No @endif-FEATURE_ZLIB@</td>
-              <td>Allows to decompress gzip and zlib compressed documents for filtering.
-                Requires external zlib library and hasn't been tested on all platforms.</td>
-            </tr>
-            <tr>
-              <td><code>STATIC_PCRE</code></td>
-              <td>@if-STATIC_PCRE-then@ Yes @else-not-STATIC_PCRE@ No @endif-STATIC_PCRE@</td>
-              <td>Use the supplied statically-linked PCRE library.  This is set automatically
-               by <code>./configure</code> if you do not have the libpcre installed.</td>
-            </tr>
-            <tr>
-              <td><code>STATIC_PCRS</code></td>
-              <td>@if-STATIC_PCRS-then@ Yes @else-not-STATIC_PCRS@ No @endif-STATIC_PCRS@</td>
-              <td>Use the supplied statically-linked PCRS library.  This is set automatically
-               by <code>./configure</code> if you do not have the libpcrs installed.</td>
-            </tr>
-          </table>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/show-status-file b/external/privoxy/templates/show-status-file
deleted file mode 100644
index 4fa9333..0000000
--- a/external/privoxy/templates/show-status-file
+++ /dev/null
@@ -1,146 +0,0 @@
-##########################################################
-#
-# Show-Status-CGI Output template for Privoxy.
-# (Variant for the show-file mode)
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  file-description:
-#    A descriptive name for the file being shown
-#  contents:
-#    The contents of the file being shown
-#  filepath
-#    The complete filename of the file being shown
-#
-#  
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    This is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy@@my-hostname@: Contents of @file-description@</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Contents of @file-description@ @filepath@</h2>
-        <pre>@contents@</pre>
-      </td>
-    </tr>
- 
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/show-url-info b/external/privoxy/templates/show-url-info
deleted file mode 100644
index a5013f5..0000000
--- a/external/privoxy/templates/show-url-info
+++ /dev/null
@@ -1,340 +0,0 @@
-########################################################################
-#
-# File        :  $Source: /cvsroot/ijbswa/current/templates/show-url-info,v $
-#
-# Purpose     :  Template for Privoxy's show-url-info CGI page.
-#
-# Copyright   :  Written by and Copyright (C) 2001-2007 the SourceForge
-#                Privoxy team. http://www.privoxy.org/
-#
-#                This program is free software; you can redistribute it 
-#                and/or modify it under the terms of the GNU General
-#                Public License as published by the Free Software
-#                Foundation; either version 2 of the License, or (at
-#                your option) any later version.
-#
-#                This program is distributed in the hope that it will
-#                be useful, but WITHOUT ANY WARRANTY; without even the
-#                implied warranty of MERCHANTABILITY or FITNESS FOR A
-#                PARTICULAR PURPOSE.  See the GNU General Public
-#                License for more details.
-#
-#                The GNU General Public License should be included with
-#                this file.  If not, you can view it at
-#                http://www.gnu.org/copyleft/gpl.html
-#                or write to the Free Software Foundation, Inc., 59
-#                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-#
-# Revisions   :
-#    $Log: show-url-info,v $
-#    Revision 1.29  2009/01/01 17:36:41  ler762
-#    remove non-standard <nobr> tags
-#
-#    Revision 1.28  2009/01/01 14:51:21  ler762
-#    keep the input field and 'go' button on the same line.
-#
-#    Revision 1.27  2008/05/26 17:30:58  fabiankeil
-#    Provide an OpenSearch Description to access the
-#    show-url-info page through "search engine plugins".
-#
-#    Revision 1.26  2008/05/05 10:03:06  fabiankeil
-#    If the provided URL isn't valid, don't show the
-#    cgi-editor-is-disabled and filters-might-be-ineffective
-#    sections.
-#
-#    Revision 1.25  2008/04/26 10:34:18  fabiankeil
-#    If zlib support is unavailable and there are content filters active
-#    but the prevent-compression action is disabled, include a warning
-#    on the show-url-info page that compression might prevent filtering.
-#
-#    Revision 1.24  2008/02/10 17:26:52  fabiankeil
-#    Reduce superfluous white space by not marking
-#    up the final results list as paragraph.
-#
-#    Revision 1.23  2008/02/01 06:04:31  fabiankeil
-#    If edit buttons on the show-url-info CGI page are hidden, explain why.
-#
-#    Revision 1.22  2007/12/08 14:29:06  fabiankeil
-#    Use CSS to let the URL and pattern input fields scale with
-#    the browser width and try to prevent vertical scroll bars
-#    if the width is less than 80 characters. Closes #1843596,
-#    thanks to Gerry Murphy and Lee.
-#
-#    Revision 1.21  2007/11/15 19:11:11  fabiankeil
-#    Reword HTTPS URL information.
-#
-#    Revision 1.20  2007/07/21 12:19:50  fabiankeil
-#    If show-url-info is called with an URL that Privoxy
-#    would reject as invalid, don't show unresolved forwarding
-#    variables, "final matches" or claim the site's secure.
-#
-#    Revision 1.19  2007/02/10 16:55:22  fabiankeil
-#    - Show forwarding settings on the show-url-info page
-#    - Fix some HTML syntax errors.
-#
-#
-#########################################################################
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach Privoxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the Privoxy administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for Privoxy's "main menu" builtin CGI page
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    Privoxy's version number
-#  code-status:
-#    Privoxy's development status: "alpha", "beta", or "stable".
-#  homepage:
-#    The Privoxy web site.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  url-given:
-#    The CGI was called with a url parameter. In that case, the
-#    following symbols are available:
-#    url:
-#      The given URL
-#    default:
-#      The system default for actions
-#    matches:
-#      The list of all matches in the actions file that this URL
-#      produced, along with the actions that were triggered by
-#      these matches
-#    final:
-#      The actions that are associated with the URL at the end of
-#      the matching process
-#  no-forwarder: Requests to url will be made directly.
-#  http-forwarder:
-#      Requests to url will be made through a HTTP proxy
-#      forward-host:
-#         The IP address or its hostname
-#      forward-port.
-#         The proxy port
-#  socks-forwarder:
-#      Requests to url will be made through a socks proxy
-#      socks-type:
-#         The socks type: socks4 or socks4a
-#      gateway-host:
-#         The IP address or its hostname
-#      gateway-port:
-#         The proxy port.
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy@@my-hostname@ URL Info</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-  <link rel="search" type="application/opensearchdescription+xml" title="Privoxy URL Info" href="/url-info-osd.xml">
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-<!-- @if-url-given-start -->
-    <tr>
-      <td class="box">
-<!-- @if-valid-url-start -->
-        <h2>Forwarding settings:</h2>
-        <p>
-          Requests for <a href="@url@">@url@</a> will be <!--
-
-# "Interesting" formatting to prevent white space at the end of the sentence.
-
-          @if-no-forwarder-start -->
-
-             made <b>directly</b>, no forwarding settings apply<!--
-
-          if-no-forwarder-end@--><!--
-          @if-http-forwarder-start --><!-- @if-socks-forwarder-start -->
-
-             first <!--
-
-          if-socks-forwarder-end@ --><!-- if-http-forwarder-end@ --><!--
-          @if-socks-forwarder-start -->
-
-             forwarded through <b>@socks-type@-proxy @gateway-host@:@gateway-port@</b><!--
-
-          if-socks-forwarder-end@ --><!--
-          @if-http-forwarder-start --><!-- @if-socks-forwarder-start -->
-
-             and then <!--
-
-          if-socks-forwarder-end@ --><!-- if-http-forwarder-end@ --><!--
-          @if-http-forwarder-start -->
-
-             forwarded through <b>HTTP-proxy @forward-host@:@forward-port@</b><!--
-
-          if-http-forwarder-end@ -->.
-      </td>
-    </tr>
-    <tr>
-      <td class="box">
-<!-- @if-https-start -->
-        <h2>NOTE:</h2>
-        <p>This is a HTTPS URL, so the part after the "/" is ignored
-          as Privoxy doesn't see the path for real HTTPS requests either.</p>
-<!-- if-https-end@ -->
-<!-- if-valid-url-end@ -->
-        <h2>Matches for <a href="@url@">@url@</a>:</h2>
-        @matches@
-<!-- @if-valid-url-start -->
-<!-- @if-cgi-editor-is-disabled-start -->
-        <p>
-          The CGI editor is currently disabled, thus no edit buttons are shown.<br>
-          Please have a look at the
-           <a href="@user-manual@xxxxxxxxxxx#ENABLE-EDIT-ACTIONS">enable-edit-actions documentation</a>
-          to learn how to enable it and what the risks are.
-        </p>
-<!--  if-cgi-editor-is-disabled-end@ -->
-<!-- @if-valid-url-end -->
-      </td>
-    </tr>
-<!-- @if-valid-url-start -->
-<!-- @if-filters-might-be-ineffective-start -->
-    <tr>
-      <td class="warning">
-        <h2>Warning:</h2>
-        <p>
-          This Privoxy version has been build without zlib support,
-          <strong>content filters will not work if the server sends compressed content.</strong>
-          Consider enabling the <a title="prevent-compression documentation"
-           href="@user-manual@xxxxxxxxxxxxxxxxx#PREVENT-COMPRESSION">prevent-compression</a>
-          action for this URL or rebuild Privoxy with zlib support.
-        </p>
-      </td>
-    </tr>
-<!-- if-filters-might-be-ineffective-end@ -->
-    <tr>
-      <td class="box">
-        <h2>Final results:</h2>
-        <b>@final@</b>
-      </td>
-    </tr>
-<!-- if-valid-url-end@ -->
-<!-- if-url-given-end@ -->
-
-<!-- @if-privoxy-is-toggled-off-start -->
-
-    <tr>
-      <td class="warning">
-        <h2>Warning:</h2>
-        <p>
-          <strong>Privoxy is currently toggled off. Matching actions will not apply
-          unless you <a href="@default-cgi@toggle?set=enable">toggle Privoxy on</a> first.</strong>
-        </p>
-      </td>
-    </tr>
-<!-- if-privoxy-is-toggled-off-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Look up the actions for a 
-<!-- @if-url-given-start -->new<!-- if-url-given-end@ -->
-          URL:</h2>
-        <form method="GET" action="@default-cgi@show-url-info">
-          <p>
-            <input type="text" name="url" size="80" value="@url@" class="url"> 
-            <input type="submit" value="Go">
-          </p>
-        </form>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/show-version b/external/privoxy/templates/show-version
deleted file mode 100644
index 9bdbbba..0000000
--- a/external/privoxy/templates/show-version
+++ /dev/null
@@ -1,159 +0,0 @@
-##########################################################
-#
-# Show-Status-CGI Output template for Privoxy.
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  redirect-url:
-#    The URL to a script that will redirect to the Privoxy
-#    documentation for a given item  
-#  invocation:
-#    The command line with whitch Privoxy was invoked
-#  options:
-#    The options read from the configfile, linked to their
-#    explanations, plus warnings if parsing acl or forward
-#    statements produced errors.
-#  sourceversions:
-#    A HTML-formatted list of the individual source file cvs versions
-#  defines:
-#    A HTML-formatted list of all conditional #defines used when
-#    Privoxy was compiled
-#
-#  
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    This is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  sourceversions
-#    The versions.
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>Privoxy@@my-hostname@: Detailed proxy version information</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Source code versions:</h2>
-        <p><i>(Note: This information is only relevant if you checked out Privoxy from CVS
-           and compiled it yourself.  If you downloaded a binary, .exe, RPM, or a .tgz file, 
-           then when you ask for support just mention the version number <b>@version@</b> 
-           and the type of download you got.)</i>
-        </p>
-        <pre>@sourceversions@</pre>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
- 
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/toggle b/external/privoxy/templates/toggle
deleted file mode 100644
index 3d63eb1..0000000
--- a/external/privoxy/templates/toggle
+++ /dev/null
@@ -1,180 +0,0 @@
-##########################################################
-#
-# Toggle Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  @if-enabled-display-then@ on @else-not-enabled-display@ off @endif-enabled-display@
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";>
-<html>
-
-<head>
-  <title>@if-enabled-display-then@Enabled@else-not-enabled-display@Disabled@endif-enabled-display@ - Privoxy@@my-hostname@</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-
-  <table cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="title">
-
-#include mod-title
-
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="box">
-        <h2>Privoxy is @if-enabled-display-then@Enabled@else-not-enabled-display@Disabled@endif-enabled-display@</h2>
-          <p>When enabled, Privoxy performs its magic - blocking
-            adverts, filtering cookies, regex-filtering, etc.</p>
-          <p>When disabled, Privoxy behaves as a normal HTTP proxy,
-            and will not affect your web browsing.</p>
-          <p><a href="@default-cgi@toggle?set=@if-enabled-display-then@disable@else-not-enabled-display@enable@endif-enabled-display@">Click
-            here</a> to @if-enabled-display-then@disable@else-not-enabled-display@enable@endif-enabled-display@ Privoxy.</p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>Bookmarklets</h2>
-          <p>Here are some bookmarklets to allow you to easily access a
-            "mini" version of this page.  They are known to work with MS 
-            Internet Explorer, Netscape and Mozilla, but should work equally
-            well in other browsers which support JavaScript.  They are designed
-            to run directly from your bookmarks - <b>not</b> by clicking the
-            links below (although that will work for testing).
-          </p>
-          <p>To save them, right-click the link and choose
-            "Add to Favorites" (IE) or "Add Bookmark" (Netscape).  You
-            will get a warning that the bookmark "may not be safe" - just
-            click OK.  Then you can run the Bookmarklet directly from your
-            favourites/bookmarks.  For even faster access, you can put
-            them on the "Links" bar (IE) or the "Personal Toolbar"
-            (Netscape), and run them with a single click.
-          </p>
-
-          <ul>
-            <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y&amp;set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Enable</a></li>
-            <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y&amp;set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Disable</a></li>
-            <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y&amp;set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - Toggle Privoxy</a>
-                  (Toggles between enabled and disabled)</li>
-            <li><a href="javascript:void(window.open('@default-cgi@toggle?mini=y','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Privoxy - View Status</a></li>
-          </ul>
-
-          <p>
-            <b>Credit:</b> The site which gave us the general idea for these
-            bookmarklets is <a href="http://www.bookmarklets.com/";>www.bookmarklets.com</a>.
-            They have <a href="http://www.bookmarklets.com/about/";>more information</a> about them.
-          </p>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-    
-  </table>
-
-</body>
-</html>
-
diff --git a/external/privoxy/templates/toggle-mini b/external/privoxy/templates/toggle-mini
deleted file mode 100644
index 3b5d5c9..0000000
--- a/external/privoxy/templates/toggle-mini
+++ /dev/null
@@ -1,91 +0,0 @@
-##########################################################
-#
-# Toggle Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    this is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  @if-enabled-display-then@ on @else-not-enabled-display@ off @endif-enabled-display@
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
-
-<head>
-  <title>@if-enabled-display-then@Enabled@else-not-enabled-display@Disabled@endif-enabled-display@ - Privoxy@@my-hostname@</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="stylesheet" type="text/css" href="@default-cgi@send-stylesheet">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxx" type="image/x-icon">
-</head>
-
-<body>
-  <p class="whiteframed">
-    <a href="@default-cgi@" target="_blank">Privoxy</a> is 
-    <b>@if-enabled-display-then@enabled@else-not-enabled-display@disabled@endif-enabled-display@</b>.
-    <br><a href="@default-cgi@toggle?mini=y&amp;set=@if-enabled-display-then@disable@else-not-enabled-display@enable@endif-enabled-display@"
-    >@if-enabled-display-then@[Disable]@else-not-enabled-display@[Enable]@endif-enabled-display@</a> |
-    <a href="javascript:window.close();">[Close]</a>
-  </p>
-</body>
-</html>
diff --git a/external/privoxy/templates/untrusted b/external/privoxy/templates/untrusted
deleted file mode 100644
index bd4015a..0000000
--- a/external/privoxy/templates/untrusted
+++ /dev/null
@@ -1,191 +0,0 @@
-##########################################################
-#
-# "Untrusted" Error Output template for Privoxy.
-#
-#
-# USING HTML TEMPLATES:
-# ---------------------
-#
-# Template files are written win plain HTML, with a few
-# additions:
-# 
-# - Lines that start with a '#' character like this one
-#   are ignored
-#
-# - Each item in the below list of exported symbols will
-#   be replaced by dynamically generated text, if they
-#   are enclosed in '@'-characters. E.g. The string @version@
-#   will be replaced by the version number of Privoxy.
-#
-# - One special application of this is to make whole blocks
-#   of the HTML template disappear if the condition <name>
-#   is not given. Simply enclose the block between the two
-#   strings @if-<name>start and if-<name>-end@. The strings
-#   should be placed in HTML comments (<!-- -->), so the
-#   html structure won't be messed when the magic happens.
-#   
-# USABLE SYMBOLS IN THIS TEMPLATE:
-# --------------------------------
-#
-#  my-ip-addr:
-#    The IP-address that the client used to reach this proxy
-#  my-hostname:
-#    The hostname associated with my-ip-addr
-#  admin-address:
-#    The email address of the pxoxy's administrator, as configured
-#    in the config file
-#  default-cgi:
-#    The URL for the "main menu" builtin CGI of this proxy
-#  menu:
-#    List of <li> elements linking to the other available CGIs
-#  version:
-#    The version number of the proxy software
-#  code-status:
-#    The development status of the proxy software: "alpha", "beta",
-#    or "stable".
-#  homepage:
-#    The URL of the SourceForge ijbswa project, who maintains this
-#    software.
-#
-#  hostport:
-#    The host and port part of the request that lead to this problem
-#  path:
-#    The path part of the request that lead to this problem
-#  referrer:
-#    The referrer of the request that lead to this problem
-#  trusted-referrers:
-#    An HTML-formatted list of referrers that are marked as trusted in
-#    the trustfile
-#
-#
-# CONDITIONAL SYMBOLS FOR THIS TEMPLATE AND THEIR DEPANDANT SYMBOLS:
-# ------------------------------------------------------------------
-#
-#  unstable:
-#    This is an alpha or beta release of the proxy software
-#  have-adminaddr-info:
-#    An e-mail address for the local Privoxy adminstrator has
-#    been specified and is available through the "admin-address"
-#    symbol
-#  have-proxy-info:
-#    A URL for online documentation about this proxy has been
-#    specified and is available through the "proxy-info-url"
-#    symbol
-#  have-help-info:
-#    If either have-proxy-info is true or have-adminaddr-info is
-#    true, have-help-info is true.  Used to conditionally include
-#    a grey box for any and all help info.
-#  force-support:
-#    Privoxy has been compiled with support for forced loading
-#    of blocked content. In that case, the symbol "force-prefix" is
-#    avaiable, which translates to the FORCE_PREFIX  
-#  have-trust-info:
-#    There were URLs with info on the trust policy defined in the config
-#    file. In this case the list of URLs is available through the
-#    "trust-info" symbol.
-#
-#
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd";><html>
-
-<head>
-  <title>Untrusted request (Privoxy@@my-hostname@)</title>
-  <meta http-equiv="Content-Style-Type" content="text/css">
-  <meta http-equiv="Content-Script-Type" content="text/javascript">
-  <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-  <meta name="robots" content="noindex,nofollow">
-  <link rel="shortcut icon" href="@default-cgi@xxxxxxxxxxxxxxxxx">
-  <style type="text/css">
-#include cgi-style.css
-  </style>
-</head>
-
-<body>
-
-  <table summary="" cellpadding="20" cellspacing="10" border="0" width="100%">
-    <tr>
-      <td class="status">
-        UNTRUSTED
-      </td>
-      <td class="title" style="width: 100%">
- 
-#include mod-title
- 
-      </td>
-    </tr>
-
-<!-- @if-unstable-start -->
-# This will only appear if CODE_STATUS is "alpha" or "beta". See configure.in
-    <tr>
-      <td class="warning" colspan="2">
-
-#include mod-unstable-warning
-
-      </td>
-    </tr>
-<!-- if-unstable-end@ -->
-
-    <tr>
-      <td class="warning" colspan="2">
-        <h2>Request for untrusted URL</h2>
-        <p>Your request for <b>@protocol@@hostport@@path@</b> was blocked,
-          because neither the request URL itself, nor its referrer
-          (<b>@referrer@</b>) were trusted.
-        </p>
-<!-- @if-force-support-start -->
-        <p>(You can <a href="@protocol@@hostport@@force-prefix@@path@">go there anyway</a>.)</p>
-<!-- if-force-support-end@ -->
-      </td>
-    </tr>
-
-    <tr>
-      <td class="box" colspan="2">
-        <h2>The following referrers are trusted:</h2>
-        <ul>
-          @trusted-referrers@
-        </ul>
-      </td>
-    </tr>
-
-<!-- @if-have-trust-info-start -->
-    <tr>
-      <td class="box" colspan="2">
-        <h2>More information on the trust policy:</h2>
-        <p>You can learn more about what this means and what you may be able to do about it by
-          reading the following documents:
-        </p>
-        <ol>
-            @trust-info@
-        </ol>
-      </td>
-    </tr>
-<!-- if-have-trust-info-end@ -->
-
-    <tr>
-      <td class="box" colspan="2">
-        <h2>More Privoxy:</h2>
-        <ul>@menu@<li><a href="@user-manual@">Documentation</a></li></ul>
-      </td>
-    </tr>
-
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-support-and-service
-
-      </td>
-    </tr>
-
-<!-- @if-have-help-info-start -->
-    <tr>
-      <td class="info" colspan="2">
-
-#include mod-local-help
-
-      </td>
-    </tr>
-<!-- if-have-help-info-end@ -->
-        
-  </table>
-
-</body>
-</html>
diff --git a/external/privoxy/templates/url-info-osd.xml b/external/privoxy/templates/url-info-osd.xml
deleted file mode 100644
index 3fbaaf1..0000000
--- a/external/privoxy/templates/url-info-osd.xml
+++ /dev/null
@@ -1,14 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/";>
-  <ShortName>Privoxy URL Info</ShortName>
-  <Description>
-    Enter a URL to see which Privoxy actions apply.
-    Only works while the browser is configured to use Privoxy.
-  </Description>
-  <InputEncoding>ISO-8859-1</InputEncoding>
-  <OutputEncoding>ISO-8859-1</OutputEncoding>
-  <Developer>Privoxy Team</Developer>
-  <Contact>ijbswa-developers@xxxxxxxxxxxxxxxxxxxxx</Contact>
-  <Image width="16" height="16" type="image/x-icon">@default-cgi@xxxxxxxxxxx</Image>
-  <Url type="text/html" method="GET" template="@default-cgi@show-url-info?url={searchTerms}"/>
-</OpenSearchDescription>
diff --git a/external/privoxy/tools/privoxy-log-parser.pl b/external/privoxy/tools/privoxy-log-parser.pl
deleted file mode 100755
index 29839a4..0000000
--- a/external/privoxy/tools/privoxy-log-parser.pl
+++ /dev/null
@@ -1,2064 +0,0 @@
-#!/usr/bin/perl
-
-################################################################################
-# privoxy-log-parser
-#
-# A parser for Privoxy log messages. For incomplete documentation run
-# perldoc privoxy-log-parser(.pl), for fancy screenshots see:
-#
-# http://www.fabiankeil.de/sourcecode/privoxy-log-parser/
-#
-# $Id: privoxy-log-parser.pl,v 1.23 2009/03/14 15:31:58 fabiankeil Exp $
-#
-# TODO:
-#       - LOG_LEVEL_CGI, LOG_LEVEL_ERROR, LOG_LEVEL_WRITE content highlighting
-#       - create fancy statistics
-#       - grep through Privoxy sources to find unsupported log messages
-#       - hunt down substitutions that match content from variables which
-#         can contain stuff like ()?'[]
-#       - replace $h{'foo'} with h('foo') where possible
-#       - hunt down XXX comments instead of just creating them
-#       - add example log lines for every regex and mark them up for
-#         regression testing
-#       - Handle incomplete input without Perl warning about undefined variables.
-#       - Use generic highlighting function that takes a regex and the
-#         hash key as input.
-#
-# Copyright (c) 2007-2009 Fabian Keil <fk@xxxxxxxxxxxxx>
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-################################################################################
-
-use strict;
-use warnings;
-use Getopt::Long;
-
-use constant {
-    PRIVOXY_LOG_PARSER_VERSION => '0.5',
-    # Feel free to mess with these ...
-    DEFAULT_BACKGROUND => 'black',  # Choose registered colour (like 'black')
-    DEFAULT_TEXT_COLOUR => 'white', # Choose registered colour (like 'black')
-    HEADER_DEFAULT_COLOUR => 'yellow',
-    REGISTER_HEADERS_WITH_THE_SAME_COLOUR => 1,
-
-    CLI_OPTION_DEFAULT_TO_HTML_OUTPUT => 0,
-    CLI_OPTION_TITLE => 'Privoxy-Log-Parser in da house',
-    CLI_OPTION_NO_EMBEDDED_CSS => 0,
-    CLI_OPTION_NO_MSECS => 0,
-    CLI_OPTION_NO_SYNTAX_HIGHLIGHTING => 0,
-    CLI_OPTION_ERROR_LOG_FILE => '/var/log/privoxy-log.log',
-    CLI_OPTION_SHOW_INEFFECTIVE_FILTERS => 0,
-    CLI_OPTION_ACCEPT_UNKNOWN_MESSAGES => 0,
-    CLI_OPTION_STATISTIC => 0,
-
-    SUPPRESS_SUCCEEDED_FILTER_ADDITIONS => 1,
-    SHOW_SCAN_INTRO => 0,
-    SHOW_FILTER_READIN_IN => 0,
-    SUPPRESS_EMPTY_LINES => 1,
-    SUPPRESS_SUCCESSFUL_CONNECTIONS => 1,
-    SUPPRESS_ACCEPTED_CONNECTIONS => 1,
-    SUPPRESS_GIF_NOT_CHANGED => 1,
-    SUPPRESS_NEED_TO_DE_CHUNK_FIRST => 1,
-
-    DEBUG_HEADER_REGISTERING => 0,
-    DEBUG_HEADER_HIGHLIGHTING => 0,
-    DEBUG_TICKS => 0,
-    DEBUG_PAINT_IT => 0,
-    DEBUG_SUPPRESS_LOG_MESSAGES => 0,
-
-    PUNISH_MISSING_LOG_KNOWLEDGE_WITH_DEATH => 0,
-    PUNISH_MISSING_HIGHLIGHT_KNOWLEDGE_WITH_DEATH => 1,
-
-    LOG_UNPARSED_LINES_TO_EXTRA_FILE => 0,
-
-    # You better leave these alone unless you know what you're doing.
-    COLOUR_RESET      => "\033[0;0m",
-    ESCAPE => "\033[",
-};
-
-sub prepare_our_stuff () {
-
-    # Syntax Higlight hash
-    our @all_colours = (
-        'red', 'green', 'brown', 'blue', 'purple', 'cyan',
-        'light_gray', 'light_red', 'light_green', 'yellow',
-        'light_blue', 'pink', 'light_cyan', 'white'
-    );
-
-    our %h = (
-        # LOG_LEVEL
-        Info            => 'blue',
-        Header          => 'green',
-        Filter          => 'purple', # XXX: Used?
-        'Re-Filter'     => 'purple',
-        Connect         => 'brown',
-        Request         => 'light_cyan',
-        CGI             => 'light_green',
-        Redirect        => 'cyan',
-        Error           => 'light_red',
-        Crunch          => 'cyan',
-        'Fatal error'   => 'light_red',
-        'Gif-Deanimate' => 'blue',
-        Force           => 'red',
-        Writing         => 'light_green',
-        # ----------------------
-        URL                  => 'yellow',
-        path                 => 'brown',
-        request_             => 'brown', # host+path but no protocol
-        'ip-address'         => 'yellow',
-        Number               => 'yellow',
-        Standard             => 'reset',
-        Truncation           => 'light_red',
-        Status               => 'brown',
-        Timestamp            => 'brown',
-        Crunching            => 'light_red',
-        crunched             => 'light_red',
-        'Request-Line'       => 'pink',
-        method               => 'purple',
-        destination          => 'yellow',
-        'http-version'       => 'pink',
-        'crunch-pattern'     => 'pink',
-        not                  => 'brown',
-        file                 => 'brown',
-        signal               => 'yellow',
-        version              => 'green',
-        'program-name'       => 'cyan',
-        port                 => 'red',
-        host                 => 'red',
-        warning              => 'light_red',
-        debug                => 'light_red',
-        filter               => 'green',
-        tag                  => 'green',
-        tagger               => 'green',
-        'status-message'     => 'light_cyan',
-        'status-code'        => 'yellow',
-        'invalid-request'    => 'light_red',
-        'hits'               => 'yellow',
-        error                => 'light_red',
-        'rewritten-URL'      => 'light_red',
-        'pcrs-delimiter'     => 'light_red',
-        'ignored'            => 'light_red',
-        'action-bits-update' => 'light_red',
-        'configuration-line' => 'red',
-        'content-type'       => 'yellow',
-    );
-
-    our %h_colours = %h;
-
-    # Header colours need their own hash so the keys can be accessed properly
-    our %header_colours = (
-        # Prefilled with headers that should not appear with default header colours
-        Cookie => 'light_red',
-        'Set-Cookie' => 'light_red',
-        Warning => 'light_red',
-        Default => HEADER_DEFAULT_COLOUR,
-    );
-
-    # Crunch reasons need their own hash as well
-    our %reason_colours = (
-        'Unsupported HTTP feature'               => 'light_red',
-        Blocked                                  => 'light_red',
-        Untrusted                                => 'light_red',
-        Redirected                               => 'green', 
-        'CGI Call'                               => 'white',
-        'DNS failure'                            => 'red',
-        'Forwarding failed'                      => 'light_red',
-        'Connection failure'                     => 'light_red',
-        'Out of memory (may mask other reasons)' => 'light_red',
-        'No reason recorded'                     => 'light_red',
-    );
-
-    our @time_colours = ('white', 'light_gray');
-
-    # Translate highlight strings into highlight code
-    prepare_highlight_hash(\%header_colours);
-    prepare_highlight_hash(\%reason_colours);
-    prepare_highlight_hash(\%h);
-    prepare_colour_array(\@all_colours);
-    prepare_colour_array(\@time_colours);
-    init_css_colours();
-}
-
-sub paint_it ($) {
-###############################################################
-# Takes a colour string and returns an ANSI escape sequence
-# (unless --no-syntax-highlighting is used).
-# XXX: The Rolling Stones reference has to go.
-###############################################################
-
-    my $colour = shift @_;
-
-    return "" if cli_option_is_set('no-syntax-highlighting');
-
-    my %light = (
-        black       => 0,    
-        red         => 0,   
-        green       => 0,  
-        brown       => 0, 
-        blue        => 0,   
-        purple      => 0, 
-        cyan        => 0,  
-        light_gray  => 0,
-        gray        => 0,
-        dark_gray   => 1,
-        light_red   => 1,
-        light_green => 1,
-        yellow      => 1,
-        light_blue  => 1,
-        pink        => 1,
-        light_cyan  => 1,
-        white       => 1,
-    );
-
-    my %text = (
-        black       => 30,    
-        red         => 31,   
-        green       => 32,  
-        brown       => 33, 
-        blue        => 34,   
-        purple      => 35, 
-        cyan        => 36,  
-        gray        => 37,
-        light_gray  => 37,
-        dark_gray   => 30,
-        light_red   => 31,
-        light_green => 32,
-        yellow      => 33,
-        light_blue  => 34,
-        pink        => 35,
-        light_cyan  => 36,
-        white       => 37,
-    );
-
-    my $bg_code = get_background();
-    my $colour_code;
-    our $default = default_colours();
-
-    if (defined($text{$colour})) {
-        $colour_code  = ESCAPE;
-        $colour_code .= $text{$colour};
-        $colour_code .= ";";
-        $colour_code .= $light{$colour} ? "1" : "2";
-        $colour_code .= ";";
-        $colour_code .= $bg_code; 
-        $colour_code .= "m";
-        debug_message $colour . " is \'" . $colour_code . $colour . $default . "\'" if DEBUG_PAINT_IT; 
-
-    } elsif ($colour =~ /reset/) {
-
-        $colour_code = default_colours();
-
-    } else {
-
-        die "What's $colour supposed to mean?\n"; 
-    }
-
-    return $colour_code;
-}
-
-sub get_semantic_html_markup ($) {
-###############################################################
-# Takes a string and returns a span element
-###############################################################
-
-    my $type = shift @_;
-    my $code;
-
-    if ($type =~ /Standard/) {
-        $code = '</span>';
-    } else {
-        $type = lc($type);
-        $code = '<span title="' . $type . '" class="' . $type . '">';
-    }
-
-    return $code;
-}
-
-sub cli_option_is_set ($) {
-
-    our %cli_options;
-    my $cli_option = shift;
-
-    die "Unknown CLI option: $cli_option" unless defined $cli_options{$cli_option};
-
-    return $cli_options{$cli_option};
-}
-
-sub get_html_title () {
-
-    our %cli_options;
-    return $cli_options{'title'};
-
-}
-
-sub init_css_colours() {
-
-    our %css_colours = (
-        black       => "000",    
-        red         => "F00",   
-        green       => "0F0",  
-        brown       => "C90", 
-        blue        => "0F0",   
-        purple      => "F06", # XXX: wrong  
-        cyan        => "F09", # XXX: wrong  
-        light_gray  => "999",
-        gray        => "333",
-        dark_gray   => "222",
-        light_red   => "F33",
-        light_green => "33F",
-        yellow      => "FF0",
-        light_blue  => "30F",
-        pink        => "F0F",
-        light_cyan  => "66F",
-        white       => "FFF",
-    );
-}
-
-sub get_css_colour ($) {
-
-   our %css_colours;
-   my $colour = shift;
-
-   die "What's $colour supposed to mean?\n" unless defined($css_colours{$colour}); 
-
-   return '#' . $css_colours{$colour};
-}
-
-sub get_css_line ($) {
-
-    our %h_colours;
-
-    my $class = shift;
-    my $css_line;
-
-    $css_line .= '.' . lc($class) . ' {'; # XXX: lc() shouldn't be necessary
-    die "What's $class supposed to mean?\n" unless defined($h_colours{$class}); 
-    $css_line .= 'color:' . get_css_colour($h_colours{$class}) . ';';
-    $css_line .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';';
-    $css_line .= '}' . "\n"; 
-
-    return $css_line;
-}
-
-sub get_css_line_for_colour ($) {
-
-    our %h_colours;
-
-    my $colour = shift;
-    my $css_line;
-
-    $css_line .= '.' . lc($colour) . ' {'; # XXX: lc() shouldn't be necessary
-    $css_line .= 'color:' . get_css_colour($colour) . ';';
-    $css_line .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';';
-    $css_line .= '}' . "\n"; 
-
-    return $css_line;
-}
-
-# XXX: Wrong solution
-sub get_missing_css_lines () {
-
-    my $css_line;
-
-    $css_line .= '.' . 'default' . ' {'; # XXX: lc() shouldn't be necessary
-    $css_line .= 'color:' . HEADER_DEFAULT_COLOUR . ';';
-    $css_line .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';';
-    $css_line .= '}' . "\n"; 
-
-    return $css_line;
-}
-
-sub get_css () {
-
-    our %h_colours;
-    our %css_colours; #XXX: Wrong solution
-
-    my $css = '';
-
-    $css .= '.privoxy-log {';
-    $css .= 'color:' . get_css_colour(DEFAULT_TEXT_COLOUR) . ';';
-    $css .= 'background-color:' . get_css_colour(DEFAULT_BACKGROUND) . ';';
-    $css .= '}' . "\n"; 
- 
-    foreach my $key (keys %h_colours) {
-
-        next if ($h_colours{$key} =~ m/reset/); #XXX: Wrong solution.
-        $css .= get_css_line($key);
-
-    }
-
-    foreach my $colour (keys %css_colours) {
-
-        $css .= get_css_line_for_colour($colour);
-
-    }
-
-    $css .= get_missing_css_lines(); #XXX: Wrong solution
-
-    return $css;
-}
-
-sub print_intro () {
-
-    my $intro = '';
-
-    if (cli_option_is_set('html-output')) {
-
-        my $title = get_html_title();
-
-        $intro .= '<html><head>';
-        $intro .= '<title>' . $title . '</title>';
-        $intro .= '<style>' . get_css() . '</style>' unless cli_option_is_set('no-embedded-css');
-        $intro .= '</head><body>';
-        $intro .= '<h1>' . $title . '</h1><p class="privoxy-log">';
-
-        print $intro;
-    }
-}
-
-sub print_outro () {
-
-    my $outro = '';
-
-    if (cli_option_is_set('html-output')) {
-
-        $outro = '</p></body></html>';
-        print $outro;
-
-    }
-}
-
-sub get_line_end () {
-
-    my $line_end = "\n";
-
-    $line_end = '<br>' . $line_end if cli_option_is_set('html-output');
-
-    return $line_end;
-}
-
-sub get_colour_html_markup ($) {
-###############################################################
-# Takes a colour string a span element. XXX: WHAT?
-# XXX: This function shouldn't be necessary, the
-# markup should always be semantically correct.
-###############################################################
-
-    my $type = shift @_;
-    my $code;
-
-    if ($type =~ /Standard/) {
-        $code = '</span>';
-    } else {
-        $code = '<span class="' . lc($type) . '">';
-    }
-
-    return $code;
-}
-
-sub default_colours () {
-    # XXX: Properly
-    our $bg_code;
-    return reset_colours();
-}
-
-sub show_colours () {
-    # XXX: Implement
-}
-
-sub reset_colours () {
-    return ESCAPE . "0m";
-}
-
-sub set_background ($){
-
-    my $colour = shift;
-    our $bg_code;
-    my %backgrounds = (
-              black       => "40",    
-              red         => "41",   
-              green       => "42",  
-              brown       => "43", 
-              blue        => "44",   
-              magenta     => "45",  
-              cyan        => "46",
-              white       => "47",  
-              default     => "49",  
-    );
-    
-    if (defined($backgrounds{$colour})) {
-        $bg_code = $backgrounds{$colour};
-    } else {
-        die "Invalid background colour: " . $colour;
-    }
-}
-
-sub get_background (){
-    return our $bg_code;
-}
-
-sub prepare_highlight_hash ($) {
-    my $ref = shift;
-
-    if (!cli_option_is_set('html-output')) {
-
-        foreach my $key (keys %$ref) {
-            $$ref{$key} = paint_it($$ref{$key}); 
-        }
-
-    } else {
-
-        foreach my $key (keys %$ref) {
-            $$ref{$key} = get_semantic_html_markup($key); 
-        }
-
-    } 
-}
-
-sub prepare_colour_array ($) {
-    my $ref = shift;
-
-    if (!cli_option_is_set('html-output')) {
-
-        foreach my $i (0 ... @$ref - 1) {
-            $$ref[$i] = paint_it($$ref[$i]); 
-        } 
-
-    } else {
-
-        foreach my $i (0 ... @$ref - 1) {
-            $$ref[$i] = get_colour_html_markup($$ref[$i]);
-        } 
-
-    }
-}
-
-sub found_unknown_content ($) {
-
-    my $unknown = shift;
-    my $message;
-
-    our %req;
-    our $t;
-
-    return if cli_option_is_set('accept-unknown-messages');
-
-    return if ($unknown =~ /\[too long, truncated\]$/);
-
-    $message = "found_unknown_content: Don't know how to highlight: ";
-    # Break line so the log file can later be parsed as Privoxy log file again
-    $message .= '"' . $unknown . '"' . " in:\n";
-    $message .= $req{$t}{'log-message'};
-    debug_message($message);
-    log_parse_error($req{$t}{'log-message'});
-
-    die "Unworthy content parser" if PUNISH_MISSING_LOG_KNOWLEDGE_WITH_DEATH;
-}
-
-sub log_parse_error ($) {
-
-    my $message = shift;
-
-    if (LOG_UNPARSED_LINES_TO_EXTRA_FILE) {
-        open(ERRORLOG, ">>" . ERROR_LOG_FILE) || die "Writing " . ERROR_LOG_FILE . " failed";
-        print ERRORLOG $message;
-        close(ERRORLOG);
-    }
-}
-
-sub debug_message (@) {
-    my @message = @_;
-    our %h;
-
-    print $h{'debug'} . "@message" . $h{'Standard'} . "\n";
-}
-
-################################################################################
-# highlighter functions that aren't loglevel-specific 
-################################################################################
-
-sub h ($) {
-
-    # Get highlight marker
-    our %h;
-    my $highlight = shift; # XXX: Stupid name;
-    my $result = '';
-    my $message;
-
-    if (defined($highlight)) {
-
-        $result = $h{$highlight};
-
-    } else {
-
-        $message = "h: Don't recognize highlighter $highlight.";
-        debug_message($message);
-        log_parser_error($message);
-        die "Unworthy highlighter function" if PUNISH_MISSING_HIGHLIGHT_KNOWLEDGE_WITH_DEATH;
-    }
-   
-    return $result;
-}
-
-sub highlight_known_headers ($) {
-
-    my $content = shift;
-    our %header_colours;
-    our %h;
-    my $headers = join ('|', keys %header_colours);
-
-    debug_message("Searching $content for things to highlight.") if DEBUG_HEADER_HIGHLIGHTING;
-
-    if ($content =~ m/(?<=\s)($headers):/) {
-        my $header = $1;
-        $content =~ s@(?<=[\s|'])($header)(?=:)@$header_colours{$header}$1$h{'Standard'}@ig;
-        debug_message("Highlighted $content") if DEBUG_HEADER_HIGHLIGHTING;
-    }
-
-    return $content;
-}
-
-sub highlight_matched_request_line ($$) {
-
-    my $result = shift; # XXX: Stupid name;
-    my $regex = shift;
-    if ($result =~ m@(.*)($regex)(.*)@) {
-        $result = $1 . highlight_request_line($2) . $3
-    }
-    return $result;
-}
-
-sub highlight_request_line ($) {
-
-    my $rl = shift;
-    my ($method, $url, $http_version);
-    our %h;
-
-    #GET http://images.sourceforge.net/sfx/icon_warning.gif HTTP/1.1
-    if ($rl =~ m/Invalid request/) {
-
-        $rl = h('invalid-request') . $rl . h('Standard');
-
-    } elsif ($rl =~ m/^([-\w]+) (.*) (HTTP\/\d\.\d)/) {
-
-        # XXX: might not match in case of HTTP method fuzzing.
-        # XXX: save these: ($method, $path, $http_version) = ($1, $2, $3);
-        $rl =~ s@^(\w+)@$h{'method'}$1$h{'Standard'}@;
-        if ($rl =~ /http:\/\//) {
-            $rl = highlight_matched_url($rl, '[^\s]*(?=\sHTTP)');
-        } else {
-            $rl = highlight_matched_pattern($rl, 'request_', '[^\s]*(?=\sHTTP)');
-        }
-
-        $rl =~ s@(HTTP\/\d\.\d)$@$h{'http-version'}$1$h{'Standard'}@;
-
-    } elsif ($rl =~ m/\.\.\. \[too long, truncated\]$/) {
-
-        $rl =~ s@^(\w+)@$h{'method'}$1$h{'Standard'}@;
-        $rl = highlight_matched_url($rl, '[^\s]*(?=\.\.\.)');
-
-    } elsif ($rl =~ m/^ $/) {
-
-        $rl = h('error') . "No request line specified!" . h('Standard');
-
-    } else {
-
-        debug_message ("Can't parse request line: $rl");
-
-    }
-
-    return $rl;
-}
-
-sub highlight_response_line ($) {
-
-    my $rl = shift;
-    my ($http_version, $status_code, $status_message);
-
-    #HTTP/1.1 200 OK
-    #ICY 200 OK
-
-    # TODO: Mark different status codes differently
-
-    if ($rl =~ m/((?:HTTP\/\d\.\d|ICY)) (\d+) (.*)/) {
-        ($http_version, $status_code, $status_message) = ($1, $2, $3);
-    } else {
-        debug_message ("Can't parse response line: $rl") and die 'Fix this';
-    }
-
-    # Rebuild highlighted
-    $rl= "";
-    $rl .= h('http-version') . $http_version . h('Standard');
-    $rl .= " ";
-    $rl .= h('status-code') . $status_code . h('Standard');
-    $rl .= " ";
-    $rl .= h('status-message') . $status_message . h('Standard');
-
-    return $rl;
-}
-
-sub highlight_matched_url ($$) {
-
-    my $result = shift; # XXX: Stupid name;
-    my $regex = shift;
-
-    #print "Got $result, regex ($regex)\n";
-
-    if ($result =~ m@(.*?)($regex)(.*)@) {
-        $result = $1 . highlight_url($2) . $3;
-        #print "Now the result is $result\n";
-    }
-
-    return $result;
-}
-
-sub highlight_matched_host ($$) {
-
-    my $result = shift; # XXX: Stupid name;
-    my $regex = shift;
-
-    if ($result =~ m@(.*?)($regex)(.*)@) {
-        $result = $1 . h('host') . $2 . h('Standard') . $3;
-    }
-
-    return $result;
-}
-
-sub highlight_matched_pattern ($$$) {
-
-    our %h;
-    my $result = shift; # XXX: Stupid name;
-    my $key = shift;
-    my $regex = shift;
-
-    die "Unknown key $key" unless defined $h{$key};
-
-    if ($result =~ m@(.*?)($regex)(.*)@) {
-        $result = $1 . h($key) . $2 . h('Standard') . $3;
-    }
-
-    return $result;
-}
-
-sub highlight_matched_path ($$) {
-
-    my $result = shift; # XXX: Stupid name;
-    my $regex = shift;
-
-    if ($result =~ m@(.*?)($regex)(.*)@) {
-        $result = $1 . h('path') . $2 . h('Standard') . $3;
-    }
-
-    return $result;
-}
-
-sub highlight_url ($) {
-
-    my $url = shift;
-
-    if (cli_option_is_set('html-output')) {
-
-        $url = '<a href="' . $url . '">' . $url . '</a>';
-
-    } else {
-
-        $url = h('URL') . $url . h('Standard');
-
-    }
-
-    return $url;
-}
-
-################################################################################
-# loglevel-specific highlighter functions
-################################################################################
-
-sub handle_loglevel_header ($) {
-
-    my $content = shift;
-    my $c = $content;
-    our $t;
-    our %req;
-    our %h;
-    our %header_colours;
-    our @all_colours;
-    our $header_colour_index;
-    our $no_special_header_highlighting;
-
-    # Register new headers
-    # scan: Accept: image/png,image/*;q=0.8,*/*;q=0.5
-    if ($c =~ m/^scan: ((?>[^:]+)):/) {
-        my $header = $1;
-        if (!defined($header_colours{$header}) and $header =~ /^[\d\w-]*$/) {
-            debug_message "Registering previously unknown header $1" if DEBUG_HEADER_REGISTERING;
-
-            if (REGISTER_HEADERS_WITH_THE_SAME_COLOUR) {
-                $header_colours{$header} =  $header_colours{'Default'};
-            } else {
-                $header_colours{$header} = $all_colours[$header_colour_index % @all_colours];
-                $header_colour_index++;
-            }
-        }
-    }
-
-    if ($c =~ m/^scan: ((\w*) (.*) (HTTP\/\d\.\d))/) {
-
-            # Client request line
-            # Save for statistics (XXX: Not implemented yet)
-            $req{$t}{'method'} = $2;
-            $req{$t}{'destination'} = $3;
-            $req{$t}{'http-version'} = $4;
-
-            $content = highlight_request_line($1);
-
-    } elsif ($c =~ m/^(scan: )((?:HTTP\/\d\.\d|ICY) (\d+) (.*))/) {
-
-            # Server response line
-            $req{$t}{'response_line'} = $2;
-            $req{$t}{'status_code'} = $3;
-            $req{$t}{'status_message'} = $4;
-            $content = $1 . highlight_response_line($req{$t}{'response_line'});
-
-    } elsif ($c =~ m/^Crunching (?:server|client) header: .* \(contains: ([^\)]*)\)/) {
-
-        # Crunching server header: Set-Cookie: trac_form_token=d5308c34e16d15e9e301a456; (contains: Cookie:)
-        $content =~ s@(?<=contains: )($1)@$h{'crunch-pattern'}$1$h{'Standard'}@;
-        $content =~ s@(Crunching)@$h{$1}$1$h{'Standard'}@;    
-
-    } elsif ($c =~ m/^New host is: ([^\s]*)\./) {
-
-        # New host is: trac.vidalia-project.net. Crunching Referer: http://www.vidalia-project.net/
-        $c = highlight_matched_host($c, '(?<=New host is: )[^\s]+');
-        $content = highlight_matched_url($c, '(?<=Crunching Referer: )[^\s]+');
-
-    } elsif ($c =~ m/^Text mode enabled by force. (Take cover)!/) {
-
-        # Text mode enabled by force. Take cover!
-        $content =~ s@($1)@$h{'warning'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^(New HTTP Request-Line: )(.*)/) {
-
-        # New HTTP Request-Line: GET http://www.privoxy.org/ HTTP/1.1
-        $content = $1 . highlight_request_line($2);
-
-    } elsif ($c =~ m/^Adjust(ed)? Content-Length to \d+/) {
-
-        # Adjusted Content-Length to 2132
-        # Adjust Content-Length to 33533
-        $content =~ s@(?<=Content-Length to )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $content = highlight_known_headers($content);
-
-    } elsif ($c =~ m/^Destination extracted from "Host:" header. New request URL:/) {
-
-        # Destination extracted from "Host:" header. New request URL: http://www.cccmz.de/~ridcully/blog/
-        $content = highlight_matched_url($content, '(?<=New request URL: ).*');
-
-    } elsif ($c =~ m/^Couldn\'t parse:/) {
-
-        # XXX: These should probable be logged with LOG_LEVEL_ERROR
-        # Couldn't parse: If-Modified-Since: Wed, 21 Mar 2007 16:34:50 GMT (crunching!)
-        # Couldn't parse: at, 24 Mar 2007 13:46:21 GMT in If-Modified-Since: Sat, 24 Mar 2007 13:46:21 GMT (crunching!)
-        $content =~ s@^(Couldn\'t parse)@$h{'error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ /^Tagger \'([^\']*)\' added tag \'([^\']*)\'/ or
-             $c =~ m/^Adding tag \'([^\']*)\' created by header tagger \'([^\']*)\'/) {
-
-        # Adding tag 'GET request' created by header tagger 'method-man' (XXX: no longer used)
-        # Tagger 'revalidation' added tag 'REVALIDATION-REQUEST'. No action bit update necessary.
-        # Tagger 'revalidation' added tag 'REVALIDATION-REQUEST'. Action bits updated accordingly.
-
-        # XXX: Save tag and tagger
-
-        $content =~ s@(?<=^Tagger \')([^\']*)@$h{'tagger'}$1$h{'Standard'}@;
-        $content =~ s@(?<=added tag \')([^\']*)@$h{'tag'}$1$h{'Standard'}@;
-        $content =~ s@(?<=Action bits )(updated)@$h{'action-bits-update'}$1$h{'Standard'}@;
-        $no_special_header_highlighting = 1;
-
-    } elsif ($c =~ /^Tagger \'([^\']*)\' didn['']t add tag \'([^\']*)\'/) {
-
-        # Tagger 'revalidation' didn't add tag 'REVALIDATION-REQUEST'. Tag already present
-        # XXX: Save tag and tagger
-
-        $content =~ s@(?<=^Tagger \')([^\']*)@$h{'tag'}$1$h{'Standard'}@;
-        $content =~ s@(?<=didn['']t add tag \')([^\']*)@$h{'tagger'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^(?:scan:|Randomiz|addh:|Adding:|Removing:|Referer:|Modified:|Accept-Language header|[Cc]ookie)/
-          or $c =~ m/^(Text mode is already enabled|Denied request with NULL byte|Replaced:|add-unique:)/
-          or $c =~ m/^(Crunched (incoming|outgoing) cookie|Suppressed offer|Accepted the client)/
-          or $c =~ m/^(addh-unique|Referer forged to)/
-          or $c =~ m/^Downgraded answer to HTTP\/1.0/
-          or $c =~ m/^Parameter: \+hide-referrer\{[^\}]*\} is a bad idea, but I don\'t care./
-          or $c =~ m/^Referer (?:overwritten|replaced) with: Referer: / #XXX: should this be highlighted?
-          or $c =~ m/^Referer crunched!/
-          or $c =~ m/^crunched x-forwarded-for!/
-          or $c =~ m/^crunched From!/
-          or $c =~ m/^ modified$/
-          or $c =~ m/^Content filtering is enabled. Crunching:/
-          or $c =~ m/^force-text-mode overruled the client/
-          or $c =~ m/^Server time in the future\./
-          or $c =~ m/^content-disposition header crunched and replaced with:/i
-          or $c =~ m/^Reducing white space in /
-          or $c =~ m/^Ignoring single quote in /
-          or $c =~ m/^Converting tab to space in /
-          or $c =~ m/A HTTP\/1\.1 response without/
-          or $c =~ m/Disabled filter mode on behalf of the client/
-            )
-    {
-        # XXX: Some of these may need highlighting
-
-        # Modified: User-Agent: Mozilla/5.0 (X11; U; SunOS i86pc; pl-PL; rv:1.8.1.1) Gecko/20070214 Firefox/2.0.0.1
-        # Accept-Language header crunched and replaced with: Accept-Language: pl-pl
-        # cookie 'Set-Cookie: eZSessionCookie=07bfec287c197440d299f81580593c3d; \
-        #  expires=Thursday, 12-Apr-07 15:16:18 GMT; path=/' send by \
-        #  http://wirres.net/article/articleview/4265/1/6/ appears to be using time format 1 (XXX: gone with the wind)
-        # Cookie rewritten to a temporary one: Set-Cookie: NSC_gffe-iuuq-mc-wtfswfs=8efb33a53660;path=/
-        # Text mode is already enabled
-        # Denied request with NULL byte(s) turned into line break(s)
-        # Replaced: 'Connection: Yo, home to Bel Air' with 'Connection: close'
-        # addh-unique: Host: people.freebsd.org
-        # Suppressed offer to compress content
-        # Crunched incoming cookie -- yum!
-        # Accepted the client's request to fetch without filtering.
-        # Crunched outgoing cookie: Cookie: PREF=ID=6cf0abd347b30262:TM=1173357617:LM=1173357617:S=jZypyyJ7LPiwFi1_
-        # addh-unique: Host: subkeys.pgp.net:11371
-        # Referer forged to: Referer: http://10.0.0.1/
-        # Downgraded answer to HTTP/1.0
-        # Parameter: +hide-referrer{pille-palle} is a bad idea, but I don't care.
-        # Referer overwritten with: Referer: pille-palle
-        # Referer replaced with: Referer: pille-palle
-        # crunched x-forwarded-for!
-        # crunched From!
-        #  modified # XXX: pretty stupid log message
-        # Content filtering is enabled. Crunching: 'Range: 1234-5678' to prevent range-mismatch problems
-        # force-text-mode overruled the client's request to fetch without filtering!
-        # Server time in the future.
-        # content-disposition header crunched and replaced with: content-disposition: filename=baz
-        # Content-Disposition header crunched and replaced with: content-disposition: filename=baz
-        # Reducing white space in 'X-LWS-Test: "This  is  quoted" this is not "this  is  " but " this again   is  not'
-        # Ignoring single quote in 'X-LWS-Test: "This  is  quoted" this is not "this  is  " but "  this again   is  not'
-        # Converting tab to space in 'X-LWS-Test:   "This  is  quoted" this   is  not "this  is  "  but  "\
-        #  this again   is  not'
-        # A HTTP/1.1 response without Connection header implies keep-alive.
-        # Disabled filter mode on behalf of the client.
-
-    } elsif ($c =~ m/^scanning headers for:/) {
-
-        return '' unless SHOW_SCAN_INTRO;
-
-    } elsif ($c =~ m/^[Cc]runch(ing|ed)|crumble crunched:/) {
-        # crunched User-Agent!
-        # Crunching: Content-Encoding: gzip
-
-        $content =~ s@(Crunching|crunched)@$h{$1}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Offending request data with NULL bytes turned into \'°\' characters:/) {
-        
-        # Offending request data with NULL bytes turned into '°' characters: °°n°°(°°°
-
-        $content = h('warning') . $content . h('Standard');
- 
-    } elsif ($c =~ m/^(Transforming \")(.*?)(\" to \")(.*?)(\")/) {
-
-        # Transforming "Proxy-Authenticate: Basic realm="Correos Proxy Server"" to\
-        #  "Proxy-Authenticate: Basic realm="Correos Proxy Server""
-
-       $content =~ s@(?<=^Transforming \")(.*)(?=\" to)@$h{'Header'}$1$h{'Standard'}@;
-       $content =~ s@(?<=to \")(.*)(?=\")@$h{'Header'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Removing empty header/) {
-
-        # Removing empty header
-        # Ignore for now
-
-    } elsif ($c =~ m/^Content-Type: .* not replaced/) {
-
-        # Content-Type: application/octet-stream not replaced. It doesn't look like text.\
-        #  Enable force-text-mode if you know what you're doing.
-        # XXX: Could highlight more here.
-        $content =~ s@(?<=^Content-Type: )(.*)(?= not replaced)@$h{'content-type'}$1$h{'Standard'}@;
-
-    } else {
-
-        found_unknown_content($content);
-    }
-
-    # Highlight headers   
-    unless ($c =~ m/^Transforming/) {
-        $content = highlight_known_headers($content) unless $no_special_header_highlighting;
-    }
-
-    return $content;
-}
-
-sub handle_loglevel_re_filter ($) {
-
-    my $content = shift;
-    my $c = $content;
-    my $key;
-    our $t;
-    our %req;
-    our %h;
-    our %header_colours;
-    our @all_colours;
-    our $header_colour_index;
-
-    if ($c =~ /\.{3}$/
-        and $c =~ m/^(?:re_)?filtering \'?(.*?)\'? \(size (\d*)\) with (?:filter )?\'?([^\s]*?)\'? ?\.{3}$/) {
-
-        # Used by Privoxy 3.0.5 and 3.0.6:
-        # XXX: Fill in ...
-        # Used by Privoxy 3.0.7:
-        # filtering 'Connection: close' (size 17) with 'generic-content-ads' ...
-
-        $req{$t}{'filtered_header'} = $1;
-        $req{$t}{'old_header_size'} = $2;
-        $req{$t}{'header_filter_name'} = $3;
-
-        unless (cli_option_is_set('show-ineffective-filters') or
-                $req{$t}{'header_filter_name'} =~ m/^privoxy-filter-test$/) {
-            return '';
-        }
-        $content =~ s@(?<=\(size )(\d+)@$h{'Number'}$1$h{'Standard'}@;   
-        $content =~ s@($req{$t}{'header_filter_name'})@$h{'filter'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^ ?\.\.\. ?produced (\d*) hits \(new size (\d*)\)\./) {
-
-        # ...produced 0 hits (new size 23).
-        #... produced 1 hits (new size 54).
-
-        $req{$t}{'header_filter_hits'} = $1;
-        $req{$t}{'new_header_size'} = $2;
-
-        unless (cli_option_is_set('show-ineffective-filters') or
-                (defined($req{$t}{'header_filter_name'}) and
-                 $req{$t}{'header_filter_name'} =~ m/^privoxy-filter-test$/)) {
-
-            if ($req{$t}{'header_filter_hits'} == 0 and
-                not (defined($req{$t}{'header_filter_name'}) and
-                 $req{$t}{'header_filter_name'} =~ m/^privoxy-filter-test$/)) {
-                return ''; 
-            }
-            # Reformat including information from the intro
-            $c = "'" . h('filter') . $req{$t}{'header_filter_name'} . h('Standard') . "'";
-            $c .= " hit ";
-            # XXX: Hide behind constant, it may be interesting if LOG_LEVEL_HEADER isn't enabled as well.
-            # $c .= $req{$t}{'filtered_header'} . " ";
-            $c .= h('Number') . $req{$t}{'header_filter_hits'}. h('Standard');
-            $c .= ($req{$t}{'header_filter_hits'} == 1) ? " time, " : " times, ";
-
-            if ($req{$t}{'old_header_size'} !=  $req{$t}{'new_header_size'}) {
-
-                $c .= "changing size from ";
-                $c .=  h('Number') . $req{$t}{'old_header_size'} . h('Standard');
-                $c .= " to ";
-                $c .= h('Number') . $req{$t}{'new_header_size'} . h('Standard');
-                $c .= ".";
-
-            } else {
-
-                $c .= "keeping the size at " . $req{$t}{'old_header_size'};
-
-            }
-
-            # Highlight from last line (XXX: What?)
-            # $c =~ s@(?<=produced )(\d+)@$h{'Number'}$1$h{'Standard'}@;   
-            # $c =~ s@($req{$t}{'header_filter_name'})@$h{'filter'}$1$h{'Standard'}@;
-
-        } else {
-
-           # XXX: Untested
-           $c =~ s@(?<=produced )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-           $c =~ s@(?<=new size )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-        }
-        $content = $c;
-
-    } elsif ($c =~ m/^(Tagger|Filter) ([^\s]*) has empty joblist. Nothing to do./) {
-
-        # Filter privoxy-filter-test has empty joblist. Nothing to do.
-        # Tagger variable-test has empty joblist. Nothing to do.
-
-        $content =~ s@(?<=$1 )([^\s]*)@$h{'filter'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^(?:re_)?filtering ([^\s]+) \(size (\d+)\) with (?:filter )?\'?([^\s]+?)\'? produced (\d+) hits \(new size (\d+)\)/) {
-
-        # XXX: only the second version gets highlighted properly.
-        # re_filtering www.lfk.de/favicon.ico (size 209) with filter untrackable-hulk produced 0 hits (new size 209).
-        # filtering aci.blogg.de/ (size 37988) with 'blogg.de' produced 3 hits (new size 38057)
-        $req{$t}{'content_source'} = $1;
-        $req{$t}{'content_size'}   = $2;
-        $req{$t}{'content_filter'} = $3;
-        $req{$t}{'content_hits'}   = $4;
-        $req{$t}{'new_content_size'} = $5;
-        $req{$t}{'content_size_change'} = $req{$t}{'new_content_size'} - $req{$t}{'content_size'};
-        #return '' if ($req{$t}{'content_hits'} == 0 && !cli_option_is_set('show-ineffective-filters'));
-        if ($req{$t}{'content_hits'} == 0 and
-            not (cli_option_is_set('show-ineffective-filters')
-                 or ($req{$t}{'content_filter'} =~ m/^privoxy-filter-test$/))) {
-                return ''; 
-        }
-
-        $c =~ s@(?<=\(size )(\d+)\)(?= with)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=\(new size )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=produced )(\d+)(?= hits)@$h{'Number'}$1$h{'Standard'}@;
-
-        $c =~ s@([^\s]+?)(\'? produced)@$h{'filter'}$1$h{'Standard'}$2@;
-        $c = highlight_matched_host($c, '(?<=filtering )[^\s]+');
-
-        $c =~ s@\.$@ @;
-        $c .= "(" . $h{'Number'};
-        $c .= "+" if ($req{$t}{'content_size_change'} >= 0);
-        $c .= $req{$t}{'content_size_change'} . $h{'Standard'} . ")";
-        $content = $c;
-
-    } elsif ($c =~ m/^De-chunking successful. Shrunk from (\d+) to (\d+)/) {
-
-        $req{$t}{'chunked-size'} = $1;
-        $req{$t}{'dechunked-size'} = $2;
-        $req{$t}{'dechunk-change'} = $req{$t}{'dechunked-size'} - $req{$t}{'chunked-size'};
-
-        $content .= " (" . h('Number') . $req{$t}{'dechunk-change'} . h('Standard') . ")";
-
-        $content =~ s@(?<=from )($req{$t}{'chunked-size'})@$h{'Number'}$1$h{'Standard'}@;
-        $content =~ s@(?<=to )($req{$t}{'dechunked-size'})@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Decompression successful. Old size: (\d+), new size: (\d+)./) {
-
-        # Decompression successful. Old size: 670, new size: 1166.
-
-        $req{$t}{'size-compressed'} = $1;
-        $req{$t}{'size-decompressed'} = $2;
-        $req{$t}{'decompression-gain'} = $req{$t}{'size-decompressed'} - $req{$t}{'size-compressed'};
-
-        $content =~ s@(?<=Old size: )($req{$t}{'size-compressed'})@$h{'Number'}$1$h{'Standard'}@;
-        $content =~ s@(?<=new size: )($req{$t}{'size-decompressed'})@$h{'Number'}$1$h{'Standard'}@;
-
-        # XXX: Create sub get_percentage()
-        if ($req{$t}{'size-decompressed'}) {
-            $req{$t}{'decompression-gain-percent'} =
-                $req{$t}{'decompression-gain'} / $req{$t}{'size-decompressed'} * 100;
-
-            $content .= " (saved: ";
-            #$content .= h('Number') . $req{$t}{'decompression-gain'} . h('Standard');
-            #$content .= "/";
-            $content .= h('Number') . sprintf("%.2f%%", $req{$t}{'decompression-gain-percent'}) . h('Standard');
-            $content .= ")";
-        }
-
-    } elsif ($c =~ m/^(Need to de-chunk first)/) {
-
-        # Need to de-chunk first
-        return '' if SUPPRESS_NEED_TO_DE_CHUNK_FIRST;
-
-    } elsif ($c =~ m/^(Adding (?:dynamic )?re_filter job)/) {
-
-        return ''  if (SUPPRESS_SUCCEEDED_FILTER_ADDITIONS && m/succeeded/);
-
-        # Adding re_filter job ...
-        # Adding dynamic re_filter job s@^(?:\w*)\s+.*\s+HTTP/\d\.\d\s*@IP-ADDRESS: $origin@D\
-        #  to filter client-ip-address succeeded.
-
-    } elsif ($c =~ m/^Reading in filter/) {
-
-        return '' unless SHOW_FILTER_READIN_IN;
-
-    } else {
-
-        found_unknown_content($content);
-
-    }
-
-    return $content;
-}
-
-sub handle_loglevel_redirect ($) {
-
-    my $c = shift;
-    our $t;
-    our %req;
-    our %h;
-
-    if ($c =~ m/^Decoding "([^""]*)"/) {
-
-         $req{$t}{'original-destination'} = $1;
-         $c = highlight_matched_path($c, '(?<=Decoding ")[^"]*');
-         $c =~ s@\"@@g;
-
-    } elsif ($c =~ m/^Checking/) {
-
-         # Checking /_ylt=A0geu.Z76BRGR9k/**http://search.yahoo.com/search?p=view+odb+presentation+on+freebsd\
-         #  &ei=UTF-8&xargs=0&pstart=1&fr=moz2&b=11 for redirects.
-
-         # TODO: Change colour if really url-decoded
-         $req{$t}{'decoded-original-destination'} = $1;
-         $c = highlight_matched_path($c, '(?<=Checking ")[^"]*');
-         $c =~ s@\"@@g;
-
-    } elsif ($c =~ m/^pcrs command "([^""]*)" changed "([^""]*)" to "([^""]*)" \((\d+) hits?\)/) {
-
-        # pcrs command "s@&from=rss@@" changed "http://it.slashdot.org/article.pl?sid=07/03/02/1657247&from=rss"\
-        #  to "http://it.slashdot.org/article.pl?sid=07/03/02/1657247"; (1 hit).
-
-        my ($pcrs_command, $url_before, $url_after, $hits) = ($1, $2, $3, $4); # XXX: save these?
-
-        $c =~ s@(?<=pcrs command )"([^""]*)"@$h{'filter'}$1$h{'Standard'}@;
-        $c = highlight_matched_url($c, '(?<=changed ")[^""]*');
-        $c =~ s@(?<=changed )"([^""]*)"@$1@; # Remove quotes
-        $c = highlight_matched_url($c, '(?<=to ")[^""]*');
-        $c =~ s@(?<=to )"([^""]*)"@$1@; # Remove quotes
-        $c =~ s@(\d+)(?= hits?)@$h{'hits'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/(^New URL is: )(.*)/) {
-
-        # New URL is: http://it.slashdot.org/article.pl?sid=07/03/04/1511210
-        # XXX: Use URL highlighter
-        # XXX: Save?
-        $c = $1 . h('rewritten-URL') . $2 . h('Standard');
-
-    } elsif ($c =~ m/No pcrs command recognized, assuming that/) {
-        # No pcrs command recognized, assuming that "http://config.privoxy.org/user-manual/favicon.png"\
-        #  is already properly formatted.
-        # XXX: assume the same?
-        $c = highlight_matched_url($c, '(?<=assuming that \")[^"]*');
-
-    } else {
-
-        found_unknown_content($c);
-
-    }
-
-    return $c;
-}
-
-sub handle_loglevel_gif_deanimate ($) {
-
-    my $content = shift;
-    our $t;
-    our %req;
-    our %h;
-
-    if ($content =~ m/Success! GIF shrunk from (\d+) bytes to (\d+)\./) {
-
-        my $bytes_from = $1;
-        my $bytes_to = $2;
-        # Gif-Deanimate: Success! GIF shrunk from 205 bytes to 133.
-        $content =~ s@$bytes_from@$h{'Number'}$bytes_from$h{'Standard'}@;
-        # XXX: Do we need g in case of ($1 == $2)?
-        $content =~ s@$bytes_to@$h{'Number'}$bytes_to$h{'Standard'}@;
-
-    } elsif ($content =~ m/GIF (not) changed/) {
-
-        # Gif-Deanimate: GIF not changed.
-        return '' if SUPPRESS_GIF_NOT_CHANGED;
-        $content =~ s@($1)@$h{'not'}$1$h{'Standard'}@;
-
-    } elsif ($content =~ m/^failed! \(gif parsing\)/) {
-
-        # failed! (gif parsing)
-        # XXX: Replace this error message with something less stupid 
-        $content =~ s@(failed!)@$h{'error'}$1$h{'Standard'}@;
-
-    } elsif ($content =~ m/^Need to de-chunk first/) {
-
-        # Need to de-chunk first
-        return '' if SUPPRESS_NEED_TO_DE_CHUNK_FIRST;
-
-    } elsif ($content =~ m/^(?:No GIF header found|failed while parsing)/) {
-
-        # No GIF header found (XXX: Did I ever commit this?)
-        # failed while parsing 195 134747048 (XXX: never commited)
-
-        # Ignore these for now
-
-    } else {
-
-        found_unknown_content($content);
-
-    }
-
-    return $content;
-}
-
-sub handle_loglevel_request ($) {
-
-    my $content = shift;
-    our $t;
-    our %req;
-    our %h;
-    our %reason_colours;
-
-    if ($content =~ m/crunch! /) {
-
-        # config.privoxy.org/send-stylesheet crunch! (CGI Call)
-
-        # Highlight crunch reasons
-        foreach my $reason (keys %reason_colours) {
-            $content =~ s@\(($reason)\)@$reason_colours{$reason}($1)$h{'Standard'}@g;
-        }
-        # Highlight request URL domain and ditch 'crunch!'
-        $content = highlight_matched_pattern($content, 'request_', '[^ ]*(?= crunch!)');
-        $content =~ s@ crunch!@@;
-
-    } elsif ($content =~ m/\[too long, truncated\]$/) {
-
-        # config.privoxy.org/edit-actions-submit?f=3&v=1176116716&s=7&Submit=Submit[...]&filter... [too long, truncated]
-        $content = highlight_matched_pattern($content, 'request_', '^.*(?=\.\.\. \[too long, truncated\]$)');
-
-    } elsif ($content =~ m/(.*)/) { # XXX: Pretty stupid
-
-        # trac.vidalia-project.net/wiki/Volunteer?format=txt
-        $content = h('request_') . $content . h('Standard');
-
-    } else {  # XXX: Nop
-
-        found_unknown_content($content);
-
-    }
-            
-    return $content;
-}
-
-sub handle_loglevel_crunch ($) {
-
-    my $content = shift;
-    our %h;
-    our %reason_colours;
-
-    # Highlight crunch reason
-    foreach my $reason (keys %reason_colours) {
-        $content =~ s@($reason)@$reason_colours{$reason}$1$h{'Standard'}@g;
-    }
-
-    if ($content =~ m/\[too long, truncated\]$/) {
-
-        # Blocked: config.privoxy.org/edit-actions-submit?f=3&v=1176116716&s=7&Submit=Submit\
-        #  [...]&filter... [too long, truncated]
-        $content = highlight_matched_pattern($content, 'request_', '^.*(?=\.\.\. \[too long, truncated\]$)');
-
-    } else {
-
-        # Blocked: http://ads.example.org/
-        $content = highlight_matched_pattern($content, 'request_', '(?<=: ).*');
-    }
-
-    return $content;
-}
-
-sub handle_loglevel_connect ($) {
-
-    my $c = shift;
-    our $t;
-    our %req;
-    our %h;
-
-    if ($c =~ m/^via [^\s]+ to: [^\s]+/) {
-
-        # Connect: via 10.0.0.1:8123 to: www.example.org.noconnect
-
-        $c = highlight_matched_host($c, '(?<=via )[^\s]+');
-        $c = highlight_matched_host($c, '(?<=to: )[^\s]+');
-
-    } elsif ($c =~ m/^connect to: .* failed: .*/) {
-
-        # connect to: www.example.org.noconnect failed: Operation not permitted
-
-        $c = highlight_matched_host($c, '(?<=connect to: )[^\s]+');
-
-        $c =~ s@(?<=failed: )(.*)@$h{'error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^to ([^\s]*) successful$/) {
-
-        # Connect: to www.nzherald.co.nz successful
-
-        return '' if SUPPRESS_SUCCESSFUL_CONNECTIONS;
-        $c = highlight_matched_host($c, '(?<=to )[^\s]+');
-
-    } elsif ($c =~ m/^to ([^\s]*)$/) {
-
-        # Connect: to lists.sourceforge.net:443
-
-        $c = highlight_matched_host($c, '(?<=to )[^\s]+');
-
-    } elsif ($c =~ m/^accepted connection from .*/ or
-             $c =~ m/^OK/) {
-
-        # accepted connection from 10.0.0.1
-        # Privoxy 3.0.6 and earlier just say:
-        # OK
-        return '' if SUPPRESS_ACCEPTED_CONNECTIONS;
-        $c = highlight_matched_host($c, '(?<=connection from ).*');
-
-    } elsif ($c =~ m/^write header to: .* failed:/) {
-
-        # write header to: 10.0.0.1 failed: Broken pipe
-
-        $c = highlight_matched_host($c, '(?<=write header to: )[^\s]*');
-        $c =~ s@(?<=failed: )(.*)@$h{'Error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^write header to client failed:/) {
-
-        # write header to client failed: Broken pipe
-        # XXX: Stil in use?
-        $c =~ s@(?<=failed: )(.*)@$h{'Error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^socks4_connect:/) {
-
-        # socks4_connect: SOCKS request rejected or failed.
-        $c =~ s@(?<=socks4_connect: )(.*)@$h{'Error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Listening for new connections/ or
-             $c =~ m/^accept connection/) {
-        # XXX: Highlight?
-        # Privoxy versions above 3.0.6 say:
-        # Listening for new connections ...
-        # earlier versions say:
-        # accept connection ...
-        return '';
-
-    } elsif ($c =~ m/^accept failed:/) {
-
-        $c =~ s@(?<=accept failed: )(.*)@$h{'Error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Overriding forwarding settings/) {
-
-        # Overriding forwarding settings based on 'forward 10.0.0.1:8123'
-        $c =~ s@(?<=based on \')(.*)(?=\')@$h{'configuration-line'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Denying suspicious CONNECT request from/) {
-
-        # Denying suspicious CONNECT request from 10.0.0.1
-        $c = highlight_matched_host($c, '(?<=from )[^\s]+'); # XXX: not an URL
-
-    } elsif ($c =~ m/^socks5_connect:/) {
-    
-        $c =~ s@(?<=socks5_connect: )(.*)@$h{'error'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Created new connection to/) {
-
-        # Created new connection to www.privoxy.org:80 on socket 11.
-        $c = highlight_matched_host($c, '(?<=connection to )[^\s]+');
-        $c =~ s@(?<=on socket )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^^Found reusable socket/) {
-
-        # Found reusable socket 9 for www.privoxy.org:80 in slot 0.
-        $c =~ s@(?<=Found reusable socket )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c = highlight_matched_host($c, '(?<=for )[^\s]+');
-        $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Marking open socket/) {
-
-        # Marking open socket 9 for www.privoxy.org:80 in slot 0 as unused.
-        $c =~ s@(?<=Marking open socket )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c = highlight_matched_host($c, '(?<=for )[^\s]+');
-        $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^No reusable/) {
-
-        # No reusable socket for addons.mozilla.org:443 found. Opening a new one.
-        $c = highlight_matched_host($c, '(?<=for )[^\s]+');
-
-    } elsif ($c =~ m/^(Remembering|Forgetting) socket/) {
-
-        # Remembering socket 13 for www.privoxy.org:80 in slot 0.
-        # Forgetting socket 38 for www.privoxy.org:80 in slot 5.
-        $c =~ s@(?<=socket )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c = highlight_matched_host($c, '(?<=for )[^\s]+');
-        $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Socket/) {
-
-        # Socket 16 already forgotten or never remembered.
-        $c =~ s@(?<=Socket )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^The connection to/) {
-
-        # The connection to www.privoxy.org:80 in slot 6 timed out. Closing socket 19. Timeout is: 61.
-        # The connection to 10.0.0.1:80 in slot 0 is no longer usable. Closing socket 4.
-        $c = highlight_matched_host($c, '(?<=connection to )[^\s]+');
-        $c =~ s@(?<=in slot )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=Closing socket )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=Timeout is: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Waiting for/) {
-
-        # Waiting for 1 connections to timeout.
-        $c =~ s@(?<=^Waiting for )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Initialized/) {
-
-        # Initialized 20 socket slots.
-        $c =~ s@(?<=Initialized )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Done reading from server/) {
-
-        # Done reading from server. Expected content length: 24892. \
-        #  Actual content length: 24892. Most recently received: 4412.
-        $c =~ s@(?<=Expected content length: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=Actual content length: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=received: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Continuing buffering headers/) {
-
-        # Continuing buffering headers. byte_count: 19. header_offset: 517. len: 536.
-        $c =~ s@(?<=byte_count: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=header_offset: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=len: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Received \d+ bytes while/) {
-
-        # Received 206 bytes while expecting 12103.
-        $c =~ s@(?<=Received )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=expecting )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Connection from/) {
-
-        # Connection from 81.163.28.218 dropped due to ACL
-        $c =~ s@(?<=^Connection from )((?:\d+\.?){4})@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Looks like we rea/ or
-             $c =~ m/^Unsetting keep-alive flag/ or
-             $c =~ m/^No connections to wait/) {
-
-        # Looks like we reached the end of the last chunk. We better stop reading.
-        # Looks like we read the end of the last chunk together with the server \
-        #  headers. We better stop reading.
-        # Unsetting keep-alive flag.
-        # No connections to wait for left.
-
-    } else {
-
-        found_unknown_content($c);
-
-    }
-            
-    return $c;
-}
-
-
-sub handle_loglevel_info ($) {
-
-    my $c = shift;
-    our $t;
-    our %req;
-    our %h;
- 
-    if ($c =~ m/^Rewrite detected:/) {
-
-        # Rewrite detected: GET http://10.0.0.2:88/blah.txt HTTP/1.1
-        $c = highlight_matched_request_line($c, '(?<=^Rewrite detected: ).*');
-
-    } elsif ($c =~ m/^Decompress(ing deflated|ion didn)/ or
-             $c =~ m/^Compressed content detected/ or
-             $c =~ m/^Tagger/
-            ) {
-        # Decompressing deflated iob: 117
-        # Decompression didn't result in any content.
-        # Compressed content detected, content filtering disabled. Consider recompiling Privoxy\
-        #  with zlib support or enable the prevent-compression action.
-        # Tagger 'complete-url' created empty tag. Ignored.
-
-        # Ignored for now
-
-    } elsif ($c =~ m/^(Re)?loading configuration file /) {
-
-        # loading configuration file '/usr/local/etc/privoxy/config':
-        # Reloading configuration file '/usr/local/etc/privoxy/config'
-        $c =~ s@(?<=loading configuration file \')([^\']*)@$h{'file'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^exiting by signal/) {
-        
-        # exiting by signal 15 .. bye
-        $c =~ s@(?<=exiting by signal )(\d+)@$h{'signal'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Privoxy version/) {
-        
-        # Privoxy version 3.0.7
-        $c =~ s@(?<=^Privoxy version )(\d+\.\d+\.\d+)$@$h{'version'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Program name: /) {
-
-        # Program name: /usr/local/sbin/privoxy
-        $c =~ s@(?<=Program name: )(.*)@$h{'program-name'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Listening on port /) {
-
-        # Listening on port 8118 on IP address 10.0.0.1
-        $c =~ s@(?<=Listening on port )(\d+)@$h{'port'}$1$h{'Standard'}@;
-        $c =~ s@(?<=on IP address )(.*)@$h{'ip-address'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^\(Re-\)Open(?:ing)? logfile/) {
-
-        # (Re-)Open logfile /var/log/privoxy/privoxy.log
-        $c =~ s@(?<=Open logfile )(.*)@$h{'file'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^(Request from|Malformed server response detected)/) {
-
-        # Request from 10.0.0.1 denied. limit-connect{,} doesn't allow CONNECT requests to port 443.
-        # Request from 10.0.0.1 marked for blocking. limit-connect{,} doesn't allow CONNECT requests to port 443.
-        # Malformed server response detected. Downgrading to HTTP/1.0 impossible.
-
-        $c =~ s@(?<=Request from )([^\s]*)@$h{'ip-address'}$1$h{'Standard'}@;
-        $c =~ s@(denied|blocking)@$h{'warning'}$1$h{'Standard'}@;
-        $c =~ s@(CONNECT)@$h{'method'}$1$h{'Standard'}@;
-        $c =~ s@(?<=to port )(\d+)@$h{'port'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Status code/) {
-
-        # Status code 304 implies no body.
-        $c =~ s@(?<=Status code )(\d+)@$h{'status-code'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Method/) {
-
-        # Method HEAD implies no body.
-        $c =~ s@(?<=Method )([^\s]+)@$h{'method'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^Buffer limit reached while extending /) {
-
-        # Buffer limit reached while extending the buffer (iob). Needed: 4197470. Limit: 4194304
-        $c =~ s@(?<=Needed: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-        $c =~ s@(?<=Limit: )(\d+)@$h{'Number'}$1$h{'Standard'}@;
-
-    } elsif ($c =~ m/^No logfile configured/ or
-             $c =~ m/^Malformerd HTTP headers detected and MS IIS5 hack enabled/ or
-             $c =~ m/^Invalid \"chunked\" transfer/ or
-             $c =~ m/^Support for/ or
-             $c =~ m/^Flushing header and buffers/
-             ) {
-
-        # No logfile configured. Please enable it before reporting any problems.
-        # Malformerd HTTP headers detected and MS IIS5 hack enabled. Expect an invalid \
-        #  response or even no response at all.
-        # No logfile configured. Logging disabled.
-        # Invalid "chunked" transfer encoding detected and ignored.
-        # Support for 'Connection: keep-alive' is experimental, incomplete and\
-        #  known not to work properly in some situations.
-        # Flushing header and buffers. Stepping back from filtering.
-
-    } else {
-
-        found_unknown_content($c);
-
-    }
-
-    return $c;
-}
-
-sub handle_loglevel_cgi ($) {
-
-    my $c = shift;
-    our $t;
-    our %req;
-    our %h;
-
-    if ($c =~ m/^Granting access to/) {
-      
-        #Granting access to http://config.privoxy.org/send-stylesheet, referrer http://p.p/ is trustworthy.
-
-    } elsif ($c =~ m/^Substituting: s(.)/) {
-      
-        # Substituting: s/@else-not-FEATURE_ZLIB@.*@endif-FEATURE_ZLIB@//sigTU
-        # XXX: prone to span several lines
-
-        my $delimiter = $1;
-        #$c =~ s@(?<=failed: )(.*)@$h{'error'}$1$h{'Standard'}@;
-        $c =~ s@(?!<=\\)($delimiter)@$h{'pcrs-delimiter'}$1$h{'Standard'}@g; # XXX: Too aggressive
-        #$c =~ s@(?!<=\\)($1)@$h{'pcrs-delimiter'}$1$h{'Standard'}@g;
-    }
-
-    return $c;
-}
-
-sub handle_loglevel_force ($) {
-
-    my $c = shift;
-    our $t;
-    our %req;
-    our %h;
-
-    if ($c =~ m/^Ignored force prefix in request:/) {
-      
-        # Ignored force prefix in request: "GET http://10.0.0.1/PRIVOXY-FORCE/block HTTP/1.1"
-        $c =~ s@^(Ignored)@$h{'ignored'}$1$h{'Standard'}@;
-        $c = highlight_matched_request_line($c, '(?<=request: ")[^"]*');
-
-    } elsif ($c =~ m/^Enforcing request:/) {
-      
-        # Enforcing request: "GET http://10.0.0.1/block HTTP/1.1".
-        $c = highlight_matched_request_line($c, '(?<=request: ")[^"]*');
-
-    } else {
-
-        found_unknown_content($c);
-
-    }
-
-    return $c;
-}
-
-sub handle_loglevel_ignore ($) {
-    return shift;
-}
-
-################################################################################
-# Functions that actually print stuff
-################################################################################
-
-sub print_clf_message () {
-
-    our ($ip, $timestamp, $request_line, $status_code, $size);
-    our %h;
-    my $output = '';
-
-    return if DEBUG_SUPPRESS_LOG_MESSAGES;
-
-    # Rebuild highlighted
-    $output .= $h{'Number'} . $ip . $h{'Standard'};
-    $output .= " - - ";
-    $output .= "[" . $h{'Timestamp'} . $timestamp . $h{'Standard'} . "]";
-    $output .= " ";
-    $output .= "\"" . highlight_request_line("$request_line") . "\"";
-    $output .= " ";
-    $output .= $h{'Status'} . $status_code . $h{'Standard'};
-    $output .= " ";
-    $output .= $h{'Number'} . $size . $h{'Standard'};
-    $output .= get_line_end();
-
-    print $output;
-}
-
-sub print_non_clf_message ($) {
-
-    our %req;
-    our %thread_colours;
-    our %h;
-    our $t;
-    our $time_colour_index;
-    our @time_colours;
-    my $output;
-    my $content = shift;
-    my ($day, $time_stamp, $msecs, $thread, $log_level)
-     = ($req{$t}{'day'}, $req{$t}{'time-stamp'}, $req{$t}{'msecs'}, $t, $req{$t}{'log-level'} );
-
-    return if DEBUG_SUPPRESS_LOG_MESSAGES;
-
-    $output .= $h{"Standard"} unless cli_option_is_set('html-output');
-    #    $output .= "$day ";
-    $output .= $time_colours[$time_colour_index % 2]; 
-
-    $output .= $time_stamp;
-    $output .= ".$msecs" unless cli_option_is_set('no-msecs');
-    $output .= $h{"Standard"};
-    $output .= " ";
-    $output .= $thread_colours{$thread} if (defined($thread_colours{$thread}));
-    $output .= $thread;
-    $output .= $h{"Standard"} . " ";
-    $output .= $h{$log_level} if (defined($h{$log_level}));
-    $output .= $log_level;
-    $output .= $h{"Standard"} . ": ";
-    $output .= "$content";
-    $output .= get_line_end();
-
-    print $output;
-}
-
-sub parse_loop () {
-
-    our $t;
-    our %req; # request data from previous lines
-    our %h;
-    our %thread_colours;
-    our @all_colours;
-    our @time_colours;
-    our $thread_colour_index = 0;
-    our $header_colour_index = 0;
-    our $time_colour_index = 0;
-
-    my ($day, $time_stamp, $thread, $log_level, $content, $c, $msecs);
-    my $last_msecs  = 0;
-    my $last_thread = 0;
-    my $last_timestamp = 0;
-    my $output;
-    my $filters_that_did_nothing;
-    my $key;
-    my $time_colour;
-    our $no_special_header_highlighting;
-    $time_colour = paint_it('white');
-    my %log_level_count;
-
-    my %log_level_handlers = (
-        'Re-Filter'     => \&handle_loglevel_re_filter,
-        'Header'        => \&handle_loglevel_header,
-        'Connect'       => \&handle_loglevel_connect,
-        'Redirect'      => \&handle_loglevel_redirect,
-        'Request'       => \&handle_loglevel_request,
-        'Crunch'        => \&handle_loglevel_crunch,
-        'Gif-Deanimate' => \&handle_loglevel_gif_deanimate,
-        'Info'          => \&handle_loglevel_info,
-        'CGI'           => \&handle_loglevel_cgi,
-        'Force'         => \&handle_loglevel_force,
-        'Error'         => \&handle_loglevel_ignore,
-        'Fatal error'   => \&handle_loglevel_ignore,
-        'Writing'       => \&handle_loglevel_ignore,
-    );
-
-    while (<>) {
- 
-        $output = '';
-
-        if (m/^(\w{3} \d{2}) (\d\d:\d\d:\d\d)\.?(\d+)? (?:Privoxy\()?([^\)\s]*)[\)]? ([\w -]*): (.*)$/) {
-            # XXX: Put in req hash?
-            $day = $1;
-            $time_stamp = $2;
-            $msecs = $3 ? $3 : 0; # Only the cool kids have micro second resolution
-            $log_level = $5;
-            $content = $c = $6;
-            $thread = $t = $4;
-
-            $req{$t}{'day'} = $day;
-            $req{$t}{'time-stamp'} = $time_stamp;
-            $req{$t}{'msecs'} = $msecs; # Only the cool kids have micro second resolution;
-            $req{$t}{'log-level'} = $log_level;
-            $req{$t}{'content'} = $content;
-            $req{$t}{'log-message'} = $_;
-            $no_special_header_highlighting = 0;
-
-            $log_level_count{$log_level}++;
-
-            if (defined($log_level_handlers{$log_level})) {
-
-                $content = $log_level_handlers{$log_level}($content);
-
-            } else {
-
-                die "No handler found for log level \"$log_level\"\n";
-
-            }
-
-            # Highlight Truncations    
-            if (m/\.\.\. \[(too long, truncated)/) {
-                $content =~ s@($1)@$h{'Truncation'}$1$h{'Standard'}@g;
-            }
-
-            next unless $content;
-
-            # Register threads to keep the colour constant
-            if (!defined($thread_colours{$thread})) {
-                $thread_colours{$thread} = $all_colours[$thread_colour_index % @all_colours];
-                $thread_colour_index++;
-            }
-
-            # Switch timestamp colour if timestamps differ
-            if ($msecs != $last_msecs || !($time_stamp =~ m/$last_timestamp/)) {
-               debug_message("Tick tack!") if DEBUG_TICKS;
-               $time_colour = $time_colours[$time_colour_index % 2]; 
-               $time_colour_index++
-            }
-
-            $last_msecs = $msecs;
-            $last_thread = $thread;
-            $last_timestamp = $time_stamp;
-
-            print_non_clf_message($content);
-
-        } elsif (m/^(\d+\.\d+\.\d+\.\d+) - - \[(.*)\] "(.*)" (\d+) (\d+)/) {
-
-            # LOG_LEVEL_CLF lines look like this
-            # 61.152.239.32 - - [04/Mar/2007:18:28:23 +0100] "GET \
-            #  http://ad.yieldmanager.com/imp?z=1&Z=120x600&s=109339&u=http%3A%2F%2Fwww.365loan.co.uk%2F&r=1\
-            #  HTTP/1.1" 403 1730
-            our ($ip, $timestamp, $request_line, $status_code, $size) = ($1, $2, $3, $4, $5);
-
-            print_clf_message();
-    
-        } else {
-
-            # Some Privoxy log messages span more than one line,
-            # usually to dump lots of content that doesn't need any syntax highlighting.
-            # XXX: add mechanism to forward these lines to the right handler anyway.
-            chomp();
-            unless (DEBUG_SUPPRESS_LOG_MESSAGES or (SUPPRESS_EMPTY_LINES and m/^\s+$/)) {
-                print and print get_line_end(); # unless (SUPPRESS_EMPTY_LINES and m/^\s+$/);
-            }
-        }
-    }
-
-    if (cli_option_is_set('statistic')) {
-        foreach (keys %log_level_count) {
-            print $_ . ": " . $log_level_count{$_} . " ";
-        }
-    }
-}
-
-sub VersionMessage {
-    my $version_message;
-
-    $version_message .= 'Privoxy-Log-Parser ' . PRIVOXY_LOG_PARSER_VERSION  . "\n";
-    $version_message .= 'Copyright (C) 2007-2009 Fabian Keil <fk@xxxxxxxxxxxxx>' . "\n";
-    $version_message .= 'http://www.fabiankeil.de/sourcecode/privoxy-log-parser/' . "\n";
-
-    print $version_message;
-}
-
-sub get_cli_options () {
-
-    our %cli_options = (
-        'html-output'              => CLI_OPTION_DEFAULT_TO_HTML_OUTPUT,
-        'title'                    => CLI_OPTION_TITLE,
-        'no-syntax-highlighting'   => CLI_OPTION_NO_SYNTAX_HIGHLIGHTING,
-        'no-embedded-css'          => CLI_OPTION_NO_EMBEDDED_CSS,
-        'no-msecs'                 => CLI_OPTION_NO_MSECS,
-        'show-ineffective-filters' => CLI_OPTION_SHOW_INEFFECTIVE_FILTERS,
-        'accept-unknown-messages'  => CLI_OPTION_ACCEPT_UNKNOWN_MESSAGES,
-        'statistic'                => CLI_OPTION_STATISTIC,
-    ); 
-
-    GetOptions (
-        'html-output'              => \$cli_options{'html-output'},
-        'title'                    => \$cli_options{'title'},
-        'no-syntax-highlighting'   => \$cli_options{'no-syntax-highlighting'},
-        'no-embedded-css'          => \$cli_options{'no-embedded-css'},
-        'no-msecs'                 => \$cli_options{'no-msecs'},
-        'show-ineffective-filters' => \$cli_options{'show-ineffective-filters'},
-        'accept-unknown-messages'  => \$cli_options{'accept-unknown-messages'},
-        'statistic'                => \$cli_options{'statistic'},
-        'version'                  => sub { VersionMessage && exit(0) }
-   );
-}
-
-
-
-################################################################################
-# main
-################################################################################
-sub main () {
-
-    get_cli_options();
-    set_background(DEFAULT_BACKGROUND);
-    prepare_our_stuff();
-
-    print_intro();
-
-    parse_loop();
-
-    print_outro();
-}
-
-main();
-
-=head1 NAME
-
-B<privoxy-log-parser> - A parser and syntax-highlighter for Privoxy log messages
-
-=head1 SYNOPSIS
-
-B<privoxy-log-parser> [B<--accept-unknown-messages>] [B<--html-output>]
-[B<--no-msecs>] [B<--no-syntax-higlighting>] [B<--show-ineffective-filters>]
-[B<--version>]
-
-=head1 DESCRIPTION
-
-B<privoxy-log-parser> reads Privoxy log messages and
-
-- syntax-highlights recognized lines,
-
-- reformats some of them for easier comprehension,
-
-- filters out less useful messages, and
-
-- (in some cases) calculates additional information,
-  like the compression ratio or how a filter affected
-  the content size.
- 
-With B<privoxy-log-parser> you should be able to increase Privoxy's log level
-without getting confused by the resulting amount of output. For example for
-"debug 64" B<privoxy-log-parser> will (by default) only show messages that
-affect the content. If a filter doesn't cause any hits, B<privoxy-log-parser>
-will hide the "filter foo caused 0 hits" message.
-
-=head1 OPTIONS
-
-[B<--accept-unknown-messages>] Don't print warnings in case of unknown messages,
-just don't highlight them.
-
-[B<--html-output>] Use HTML and CSS for the syntax highlighting. If this option is
-omitted, ANSI escape sequences are used unless B<--no-syntax-highlighting> is active.
-This option is only intended to make embedding log excerpts in web pages easier.
-It does not excape any input!
-
-[B<--no-msecs>] Don't expect milisecond resolution
-
-[B<--no-syntax-highlighting>] Disable syntax-highlighting. Useful when
-the filtered output is piped into less in which case the ANSI control
-codes don't work, or if the terminal itself doesn't support the control
-codes.
-
-[B<--show-ineffective-filters>] Don't suppress log lines for filters
-that didn't modify the content.
-
-[B<--version>] Print version and exit.
-
-=head1 EXAMPLES
-
-To monitor a log file:
-
-tail -F /usr/jails/privoxy-jail/var/log/privoxy/privoxy.log | B<privoxy-log-parser>
-
-Replace '-F' with '-f' if your tail implementation lacks '-F' support
-or if the log won't get rotated anyway. The log file location depends
-on your system (Doh!).
-
-To monitor Privoxy without having it write to a log file:
-
-privoxy --no-daemon /usr/jails/privoxy-jail/usr/local/etc/privoxy/config 2>&1 | B<privoxy-log-parser>
-
-Again, the config file location depends on your system. Output redirection
-depends on your shell, the above works with bourne shells.
-
-To read a processed Privoxy log file from top to bottom, letting the content
-scroll by slightly faster than you can read:
-
-B<privoxy-log-parser> < /usr/jails/privoxy-jail/var/log/privoxy/privoxy.log
-
-This is probably only useful to fill screens in the background of haxor movies.
-
-=head1 CAVEATS
-
-Syntax highlighting with ANSI escape sequences will look strange
-if your background color isn't black.
-
-Some messages aren't recognized yet and will not be fully highlighted.
-
-B<privoxy-log-parser> is developed with Privoxy 3.0.7 or later in mind,
-using earlier Privoxy versions will probably result in an increased amount
-of unrecognized log lines.
-
-Privoxy's log files tend to be rather large. If you use HTML
-highlighting some browsers can't handle them, get confused and
-will eventually crash because of segmentation faults or unexpected
-exceptions. This is a problem in the browser and not B<privoxy-log-parser>'s
-fault.
-
-=head1 BUGS
-
-Many settings can't be controlled through command line options yet.
-
-=head1 SEE ALSO
-
-privoxy(1)
-
-=head1 AUTHOR
-
-Fabian Keil <fk@xxxxxxxxxxxxx>
-
-=cut
diff --git a/external/privoxy/tools/privoxy-regression-test.pl b/external/privoxy/tools/privoxy-regression-test.pl
deleted file mode 100755
index c7269b7..0000000
--- a/external/privoxy/tools/privoxy-regression-test.pl
+++ /dev/null
@@ -1,1754 +0,0 @@
-#!/usr/bin/perl
-
-############################################################################
-#
-# Privoxy-Regression-Test
-#
-# A regression test "framework" for Privoxy. For documentation see:
-# perldoc privoxy-regression-test.pl
-#
-# $Id: privoxy-regression-test.pl,v 1.34 2009/02/27 18:35:22 fabiankeil Exp $
-#
-# Wish list:
-#
-# - Update documentation
-# - Validate HTTP times.
-# - Implement a HTTP_VERSION directive or allow to
-#   specify whole request lines.
-# - Support filter regression tests.
-# - Document magic Expect Header values
-# - Internal fuzz support?
-#
-# Copyright (c) 2007-2009 Fabian Keil <fk@xxxxxxxxxxxxx>
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-############################################################################
-
-use warnings;
-use strict;
-use Getopt::Long;
-
-use constant {
-    PRT_VERSION => 'Privoxy-Regression-Test 0.3',
- 
-    CURL => 'curl',
-
-    # CLI option defaults
-    CLI_RETRIES   => 1,
-    CLI_LOOPS     => 1,
-    CLI_MAX_TIME  => 5,
-    CLI_MIN_LEVEL => 0,
-    # XXX: why limit at all?
-    CLI_MAX_LEVEL => 100,
-    CLI_FORKS     => 0,
-
-    PRIVOXY_CGI_URL  => 'http://p.p/',
-    FELLATIO_URL     => 'http://127.0.0.1:8080/',
-    LEADING_LOG_DATE => 1,
-    LEADING_LOG_TIME => 1,
-
-    DEBUG_LEVEL_FILE_LOADING    => 0,
-    DEBUG_LEVEL_PAGE_FETCHING   => 0,
-    DEBUG_LEVEL_VERBOSE_FAILURE => 1,
-    # XXX: Only partly implemented and mostly useless.
-    DEBUG_LEVEL_VERBOSE_SUCCESS => 0,
-    DEBUG_LEVEL_STATUS          => 1,
-
-    VERBOSE_TEST_DESCRIPTION    => 1,
-
-    # Internal use, don't modify
-    # Available debug bits:
-    LL_ERROR            =>  1,
-    LL_VERBOSE_FAILURE  =>  2,
-    LL_PAGE_FETCHING    =>  4,
-    LL_FILE_LOADING     =>  8,
-    LL_VERBOSE_SUCCESS  => 16,
-    LL_STATUS           => 32,
-    LL_SOFT_ERROR       => 64,
-
-    CLIENT_HEADER_TEST  =>  1,
-    SERVER_HEADER_TEST  =>  2,
-    DUMB_FETCH_TEST     =>  3,
-    METHOD_TEST         =>  4,
-    STICKY_ACTIONS_TEST =>  5,
-    TRUSTED_CGI_REQUEST =>  6,
-    BLOCK_TEST          =>  7,
-};
-
-sub init_our_variables () {
-
-    our $leading_log_time = LEADING_LOG_TIME;
-    our $leading_log_date = LEADING_LOG_DATE;
-
-    our $privoxy_cgi_url  = PRIVOXY_CGI_URL;
-
-    our $verbose_test_description = VERBOSE_TEST_DESCRIPTION;
-
-    our $log_level = get_default_log_level();
-
-}
-
-sub get_default_log_level () {
-    
-    my $log_level = 0;
-
-    $log_level |= LL_FILE_LOADING    if DEBUG_LEVEL_FILE_LOADING;
-    $log_level |= LL_PAGE_FETCHING   if DEBUG_LEVEL_PAGE_FETCHING;
-    $log_level |= LL_VERBOSE_FAILURE if DEBUG_LEVEL_VERBOSE_FAILURE;
-    $log_level |= LL_VERBOSE_SUCCESS if DEBUG_LEVEL_VERBOSE_SUCCESS;
-    $log_level |= LL_STATUS          if DEBUG_LEVEL_STATUS;
-
-    # These are intended to be always on.
-    $log_level |= LL_SOFT_ERROR;
-    $log_level |= LL_ERROR;
-
-    return $log_level;
-}
-
-############################################################################
-#
-# File loading functions
-#
-############################################################################
-
-sub parse_tag ($) {
-
-    my $tag = shift;
-
-    # Remove anchors
-    $tag =~ s@[\$\^]@@g;
-    # Unescape brackets and dots
-    $tag =~ s@\\(?=[{}().+])@@g;
-
-    # log_message("Parsed tag: " . $tag);
-
-    check_for_forbidden_characters($tag);
-
-    return $tag;
-}
-
-sub check_for_forbidden_characters ($) {
-
-    my $tag = shift; # XXX: also used to check values though.
-    my $allowed = '[-=\dA-Za-z~{}:.\/();\s,+@"_%\?&*^]';
-
-    unless ($tag =~ m/^$allowed*$/) {
-        my $forbidden = $tag;
-        $forbidden =~ s@^$allowed*(.).*@$1@;
-
-        l(LL_ERROR, "'" . $tag . "' contains character '" . $forbidden. "' which is unacceptable.");
-    }
-}
-
-sub load_regressions_tests () {
-
-    our $privoxy_cgi_url;
-    our @privoxy_config;
-    our %privoxy_features;
-    my @actionfiles;
-    my $curl_url = '';
-    my $file_number = 0;
-    my $feature;
-
-    $curl_url .= $privoxy_cgi_url;
-    $curl_url .= 'show-status';
-
-    l(LL_STATUS, "Asking Privoxy for the number of action files available ...");
-
-    foreach (@{get_cgi_page_or_else($curl_url)}) {
-
-        chomp;
-        if (/<td>(.*?)<\/td><td class=\"buttons\"><a href=\"\/show-status\?file=actions&amp;index=(\d+)\">/) {
-
-            my $url = $privoxy_cgi_url . 'show-status?file=actions&index=' . $2;
-            $actionfiles[$file_number++] = $url;
-
-        } elsif (m@config\.html#.*\">([^<]*)</a>\s+(.*)<br>@) {
-
-            my $directive = $1 . " " . $2;
-            push (@privoxy_config, $directive);
-
-        } elsif (m@<td><code>([^<]*)</code></td>@) {
-
-            $feature = $1;
-
-        } elsif (m@<td> (Yes|No) </td>@) {
-
-            $privoxy_features{$feature} = $1 if defined $feature;
-            $feature = undef;
-        }
-    }
-
-    l(LL_FILE_LOADING, "Recognized " . @actionfiles . " actions files");
-
-    load_action_files(\@actionfiles);
-}
-
-sub token_starts_new_test ($) {
-
-    my $token = shift;
-    my @new_test_directives = ('set header', 'fetch test',
-         'trusted cgi request', 'request header', 'method test',
-         'blocked url', 'url');
-
-    foreach my $new_test_directive (@new_test_directives) {
-        return 1 if $new_test_directive eq $token;
-    }
-
-    return 0;
-}
-
-sub tokenize ($) {
-
-    my ($token, $value) = (undef, undef);
-
-    # Remove leading and trailing white space.
-    s@^\s*@@;
-    s@\s*$@@;
-
-    # Reverse HTML-encoding
-    # XXX: Seriously imcomplete. 
-    s@&quot;@"@g;
-    s@&amp;@&@g;
-
-    # Tokenize
-    if (/^\#\s*([^=:]*?)\s*[=]\s*(.+?)\s*$/) {
-
-        $token = $1;
-        $value = $2;
-
-        $token =~ s@\s\s+@ @g;
-        $token =~ tr/[A-Z]/[a-z]/;
-
-    } elsif (/^TAG\s*:(.*)$/) {
-
-        $token = 'tag';
-        $value = $1;
-    }
-
-    return ($token, $value);
-}
-
-sub enlist_new_test ($$$$$$) {
-
-    my ($regression_tests, $token, $value, $si, $ri, $number) = @_;
-    my $type;
-
-    if ($token eq 'set header') {
-
-        l(LL_FILE_LOADING, "Header to set: " . $value);
-        $type = CLIENT_HEADER_TEST;
-
-    } elsif ($token eq 'request header') {
-
-        l(LL_FILE_LOADING, "Header to request: " . $value);
-        $type = SERVER_HEADER_TEST;
-        $$regression_tests[$si][$ri]{'expected-status-code'} = 200;
-
-    } elsif ($token eq 'trusted cgi request') {
-
-        l(LL_FILE_LOADING, "CGI URL to test in a dumb way: " . $value);
-        $type = TRUSTED_CGI_REQUEST;
-        $$regression_tests[$si][$ri]{'expected-status-code'} = 200;
-
-    } elsif ($token eq 'fetch test') {
-
-        l(LL_FILE_LOADING, "URL to test in a dumb way: " . $value);
-        $type = DUMB_FETCH_TEST;
-        $$regression_tests[$si][$ri]{'expected-status-code'} = 200;
-
-    } elsif ($token eq 'method test') {
-
-        l(LL_FILE_LOADING, "Method to test: " . $value);
-        $type = METHOD_TEST;
-        $$regression_tests[$si][$ri]{'expected-status-code'} = 200;
-
-    } elsif ($token eq 'blocked url') {
-
-        l(LL_FILE_LOADING, "URL to block-test: " . $value);
-        $type = BLOCK_TEST;
-
-    } elsif ($token eq 'url') {
-
-        l(LL_FILE_LOADING, "Sticky URL to test: " . $value);
-        $type = STICKY_ACTIONS_TEST;
-
-    } else {
-
-        die "Incomplete '" . $token . "' support detected."; 
-    }
-
-    $$regression_tests[$si][$ri]{'type'} = $type;
-    $$regression_tests[$si][$ri]{'level'} = $type;
-
-    check_for_forbidden_characters($value);
-
-    $$regression_tests[$si][$ri]{'data'} = $value;
-
-    # For function that only get passed single tests
-    $$regression_tests[$si][$ri]{'section-id'} = $si;
-    $$regression_tests[$si][$ri]{'regression-test-id'} = $ri;
-    $$regression_tests[$si][$ri]{'number'} = $number - 1;
-    l(LL_FILE_LOADING,
-      "Regression test " . $number . " (section:" . $si . "):");
-}
-
-sub load_action_files ($) {
-
-    # initialized here
-    our %actions;
-    our @regression_tests;
-
-    my $actionfiles_ref = shift;
-    my @actionfiles = @{$actionfiles_ref};
-
-    my $si = 0;  # Section index
-    my $ri = -1; # Regression test index
-    my $count = 0;
-
-    my $ignored = 0;
-
-    l(LL_STATUS, "Gathering regression tests from " .
-      @actionfiles . " action file(s) delivered by Privoxy.");
-
-    for my $file_number (0 .. @actionfiles - 1) {
-
-        my $curl_url = ' "' . $actionfiles[$file_number] . '"';
-        my $actionfile = undef;
-        my $sticky_actions = undef;
-
-        foreach (@{get_cgi_page_or_else($curl_url)}) {
-
-            my $no_checks = 0;
-            chomp;
-
-            if (/<h2>Contents of Actions File (.*?)</) {
-                $actionfile = $1;
-                next;
-            }
-            next unless defined $actionfile;
-
-            last if (/<\/pre>/);
-
-            my ($token, $value) = tokenize($_);
-
-            next unless defined $token;
-
-            # Load regression tests
-
-            if (token_starts_new_test($token)) {
-
-                # Beginning of new regression test.
-                $ri++;
-                $count++;
-                enlist_new_test(\@regression_tests, $token, $value, $si, $ri, $count);
-            }
-
-            if ($token =~ /level\s+(\d+)/i) {
-
-                my $level = $1;
-                register_dependency($level, $value);
-            }
-
-            if ($token eq 'sticky actions') {
-
-                # Will be used by each following Sticky URL.
-                $sticky_actions = $value;
-                if ($sticky_actions =~ /{[^}]*\s/) {
-                    l(LL_ERROR,
-                      "'Sticky Actions' with whitespace inside the " .
-                      "action parameters are currently unsupported.");
-                }
-            }
-            
-            if ($si == -1 || $ri == -1) {
-                # No beginning of a test detected yet,
-                # so we don't care about any other test
-                # attributes.
-                next;
-            }
-
-            if ($token eq 'expect header') {
-
-                l(LL_FILE_LOADING, "Detected expectation: " . $value);
-                $regression_tests[$si][$ri]{'expect-header'} = $value;
-
-            } elsif ($token eq 'tag') {
-                
-                next if ($ri == -1);
-
-                my $tag = parse_tag($value);
-
-                # We already checked in parse_tag() after filtering
-                $no_checks = 1;
-
-                l(LL_FILE_LOADING, "Detected TAG: " . $tag);
-
-                # Save tag for all tests in this section
-                do {
-                    $regression_tests[$si][$ri]{'tag'} = $tag; 
-                } while ($ri-- > 0);
-
-                $si++;
-                $ri = -1;
-
-            } elsif ($token eq 'ignore' && $value =~ /Yes/i) {
-
-                l(LL_FILE_LOADING, "Ignoring section: " . test_content_as_string($regression_tests[$si][$ri]));
-                $regression_tests[$si][$ri]{'ignore'} = 1;
-                $ignored++;
-
-            } elsif ($token eq 'expect status code') {
-
-                l(LL_FILE_LOADING, "Expecting status code: " . $value);
-                $regression_tests[$si][$ri]{'expected-status-code'} = $value;
-
-            } elsif ($token eq 'level') { # XXX: stupid name
-
-                $value =~ s@(\d+).*@$1@;
-                l(LL_FILE_LOADING, "Level: " . $value);
-                $regression_tests[$si][$ri]{'level'} = $value;
-
-            } elsif ($token eq 'method') {
-
-                l(LL_FILE_LOADING, "Method: " . $value);
-                $regression_tests[$si][$ri]{'method'} = $value;
-
-            } elsif ($token eq 'url') {
-
-                if (defined $sticky_actions) {
-                    die "WTF? Attempted to overwrite Sticky Actions"
-                        if defined ($regression_tests[$si][$ri]{'sticky-actions'});
-
-                    l(LL_FILE_LOADING, "Sticky actions: " . $sticky_actions);
-                    $regression_tests[$si][$ri]{'sticky-actions'} = $sticky_actions;
-                } else {
-                    l(LL_ERROR, "Sticky URL without Sticky Actions: $value");
-                }
-
-            } else {
-
-                # We don't use it, so we don't need
-                $no_checks = 1;
-            }
-            # XXX: Neccessary?
-            check_for_forbidden_characters($value) unless $no_checks;
-            check_for_forbidden_characters($token);
-        }
-    }
-
-    l(LL_FILE_LOADING, "Done loading " . $count . " regression tests." 
-      . " Of which " . $ignored. " will be ignored)\n");
-}
-
-############################################################################
-#
-# Regression test executing functions
-#
-############################################################################
-
-sub execute_regression_tests () {
-
-    our @regression_tests;
-    my $loops = get_cli_option('loops');
-    my $all_tests    = 0;
-    my $all_failures = 0;
-    my $all_successes = 0;
-
-    unless (@regression_tests) {
-
-        l(LL_STATUS, "No regression tests found.");
-        return;
-    }
-
-    l(LL_STATUS, "Executing regression tests ...");
-
-    while ($loops-- > 0) {
-
-        my $successes = 0;
-        my $tests = 0;
-        my $failures;
-        my $skipped = 0;
-
-        for my $s (0 .. @regression_tests - 1) {
-
-            my $r = 0;
-
-            while (defined $regression_tests[$s][$r]) {
-
-                die "Section id mismatch" if ($s != $regression_tests[$s][$r]{'section-id'});
-                die "Regression test id mismatch" if ($r != $regression_tests[$s][$r]{'regression-test-id'});
-
-                my $number = $regression_tests[$s][$r]{'number'};
-                my $skip_reason = undef;
-
-                if ($regression_tests[$s][$r]{'ignore'}) {
-
-                    $skip_reason = "Ignore flag is set";
-
-                } elsif (cli_option_is_set('test-number')
-                         and get_cli_option('test-number') != $number) {
-
-                    $skip_reason = "Only executing test " . get_cli_option('test-number');
-
-                } else {
-
-                    $skip_reason = level_is_unacceptable($regression_tests[$s][$r]{'level'});
-                }
-
-                if (defined $skip_reason) {
-
-                    my $message = "Skipping test " . $number . ": " . $skip_reason . ".";
-                    log_message($message) if (cli_option_is_set('verbose') or
-                                              cli_option_is_set('show-skipped-tests'));
-                    $skipped++;
-
-                } else {
-
-                    my $result = execute_regression_test($regression_tests[$s][$r]);
-
-                    log_result($regression_tests[$s][$r], $result, $tests);
-
-                    $successes += $result;
-                    $tests++;
-                }
-                $r++;
-            }
-        }
-        $failures = $tests - $successes;
-
-        log_message("Executed " . $tests . " regression tests. " .
-            'Skipped ' . $skipped . '. ' . 
-            $successes . " successes, " . $failures . " failures.");
-
-        $all_tests     += $tests;
-        $all_failures  += $failures;
-        $all_successes += $successes;
-
-    }
-
-    if (get_cli_option('loops') > 1) {
-        log_message("Total: Executed " . $all_tests . " regression tests. " .
-            $all_successes . " successes, " . $all_failures . " failures.");
-    }
-}
-
-sub level_is_unacceptable ($) {
-    my $level = shift;
-    my $min_level = get_cli_option('min-level');
-    my $max_level = get_cli_option('max-level');
-    my $required_level = cli_option_is_set('level') ?
-        get_cli_option('level') : $level;
-    my $reason = undef;
-
-    if ($required_level != $level) {
-
-        $reason = "Level doesn't match (" . $level .
-                  " != " . $required_level . ")"
-
-    } elsif ($level < $min_level) {
-
-        $reason = "Level to low (" . $level . " < " . $min_level . ")";
-
-    } elsif ($level > $max_level) {
-
-        $reason = "Level to high (" . $level . " > " . $max_level . ")";
-
-    } else {
-
-        $reason = dependency_unsatisfied($level);
-    }
-
-    return $reason;
-}
-
-sub dependency_unsatisfied ($) {
-
-    my $level = shift;
-    our %dependencies;
-    our @privoxy_config;
-    our %privoxy_features;
-
-    my $dependency_problem = undef;
-
-    if (defined ($dependencies{$level}{'config line'})) {
-
-        my $dependency = $dependencies{$level}{'config line'};
-        $dependency_problem = "depends on config line matching: '" . $dependency . "'";
-
-        foreach (@privoxy_config) {
-
-             $dependency_problem = undef if (/$dependency/);
-             last; # XXX: this looks ... interesting.
-        }
-
-    } elsif (defined ($dependencies{$level}{'feature status'})) {
-
-        my $dependency = $dependencies{$level}{'feature status'};
-        my ($feature, $status) = $dependency =~ /([^\s]*)\s+(Yes|No)/;
-
-        unless (defined($privoxy_features{$feature})
-                and ($privoxy_features{$feature} eq $status))
-        {
-            $dependency_problem = "depends on '" . $feature .
-                "' being set to '" . $status . "'";
-        }
-    }
-
-    return $dependency_problem;
-}
-
-sub register_dependency ($$) {
-
-    my $level = shift;
-    my $dependency = shift;
-    our %dependencies;
-
-    if ($dependency =~ /config line\s+(.*)/) {
-
-        $dependencies{$level}{'config line'} = $1;
-
-    } elsif ($dependency =~ /feature status\s+(.*)/) {
-
-        $dependencies{$level}{'feature status'} = $1;
-
-    }
-}
-
-# XXX: somewhat misleading name
-sub execute_regression_test ($) {
-
-    my $test_ref = shift;
-    my %test = %{$test_ref};
-    my $result = 0;
-
-    if ($test{'type'} == CLIENT_HEADER_TEST) {
-
-        $result = execute_client_header_regression_test($test_ref);
-
-    } elsif ($test{'type'} == SERVER_HEADER_TEST) {
-
-        $result = execute_server_header_regression_test($test_ref);
-
-    } elsif ($test{'type'} == DUMB_FETCH_TEST
-          or $test{'type'} == TRUSTED_CGI_REQUEST) {
-
-        $result = execute_dumb_fetch_test($test_ref);
-
-    } elsif ($test{'type'} == METHOD_TEST) {
-
-        $result = execute_method_test($test_ref);
-
-    } elsif ($test{'type'} == BLOCK_TEST) {
-
-        $result = execute_block_test($test_ref);
-
-    } elsif ($test{'type'} == STICKY_ACTIONS_TEST) {
-
-        $result = execute_sticky_actions_test($test_ref);
-
-    } else {
-
-        die "Unsupported test type detected: " . $test{'type'};
-    }
-
-    return $result;
-}
-
-sub execute_method_test ($) {
-
-    my $test_ref = shift;
-    my %test = %{$test_ref};
-    my $buffer_ref;
-    my $status_code;
-    my $method = $test{'data'};
-
-    my $curl_parameters = '';
-    my $expected_status_code = $test{'expected-status-code'};
-
-    $curl_parameters .= '--request ' . $method . ' ';
-    # Don't complain about the 'missing' body
-    $curl_parameters .= '--head ' if ($method =~ /^HEAD$/i);
-
-    $curl_parameters .= PRIVOXY_CGI_URL;
-
-    $buffer_ref = get_page_with_curl($curl_parameters);
-    $status_code = get_status_code($buffer_ref);
-
-    return check_status_code_result($status_code, $expected_status_code);
-}
-
-sub execute_dumb_fetch_test ($) {
-
-    my $test_ref = shift;
-    my %test = %{$test_ref};
-    my $buffer_ref;
-    my $status_code;
-
-    my $curl_parameters = '';
-    my $expected_status_code = $test{'expected-status-code'};
-
-    if (defined $test{method}) {
-        $curl_parameters .= '--request ' . $test{method} . ' ';
-    }
-    if ($test{type} == TRUSTED_CGI_REQUEST) {
-        $curl_parameters .= '--referer ' . PRIVOXY_CGI_URL . ' ';
-    }
-
-    $curl_parameters .= $test{'data'};
-
-    $buffer_ref = get_page_with_curl($curl_parameters);
-    $status_code = get_status_code($buffer_ref);
-
-    return check_status_code_result($status_code, $expected_status_code);
-}
-
-sub execute_block_test ($) {
-
-    my $test = shift;
-    my $url = $test->{'data'};
-    my $final_results = get_final_results($url);
-
-    return defined $final_results->{'+block'};
-}
-
-sub execute_sticky_actions_test ($) {
-
-    my $test = shift;
-    my $url = $test->{'data'};
-    my $verified_actions = 0;
-    # XXX: splitting currently doesn't work for actions whose parameters contain spaces.
-    my @sticky_actions = split(/\s+/, $test->{'sticky-actions'});
-    my $final_results = get_final_results($url);
-
-    foreach my $sticky_action (@sticky_actions) {
-        if (defined $final_results->{$sticky_action}) {
-            # Exact match
-            $verified_actions++;
-        }elsif ($sticky_action =~ /-.*\{/ and
-                not defined $final_results->{$sticky_action}) {
-            # Disabled multi actions aren't explicitly listed as
-            # disabled and thus have to be checked by verifying
-            # that they aren't enabled.
-            $verified_actions++;
-        } else {
-            l(LL_VERBOSE_FAILURE,
-              "Ooops. '$sticky_action' is not among the final results.");
-        }
-    }
-
-    return $verified_actions == @sticky_actions;
-}
-
-sub get_final_results ($) {
-
-    my $url = shift;
-    my $curl_parameters = '';
-    my %final_results = ();
-    my $final_results_reached = 0;
-
-    die "Unacceptable characters in $url" if $url =~ m@[\\'"]@;
-    # XXX: should be URL-encoded properly
-    $url =~ s@%@%25@g;
-    $url =~ s@\s@%20@g;
-    $url =~ s@&@%26@g;
-    $url =~ s@:@%3A@g;
-    $url =~ s@/@%2F@g;
-
-    $curl_parameters .= quote(PRIVOXY_CGI_URL . 'show-url-info?url=' . $url);
-
-    foreach (@{get_cgi_page_or_else($curl_parameters)}) {
-
-        $final_results_reached = 1 if (m@<h2>Final results:</h2>@);
-
-        next unless ($final_results_reached);
-        last if (m@</td>@);
-
-        if (m@<br>([-+])<a.*>([^>]*)</a>(?: (\{.*\}))?@) {
-            my $action = $1.$2;
-            my $parameter = $3;
-            
-            if (defined $parameter) {
-                # In case the caller needs to check
-                # the action and its parameter
-                $final_results{$action . $parameter} = 1;
-            }
-            # In case the action doesn't have parameters
-            # or the caller doesn't care for the parameter.
-            $final_results{$action} = 1;
-        }
-    }
-
-    return \%final_results;
-}
-
-sub check_status_code_result ($$) {
-
-    my $status_code = shift;
-    my $expected_status_code = shift;
-    my $result = 0;
-
-    unless (defined $status_code) {
-
-        # XXX: should probably be caught earlier.
-        l(LL_VERBOSE_FAILURE,
-          "Ooops. We expected status code " . $expected_status_code . ", but didn't get any status code at all.");
-
-    } elsif ($expected_status_code == $status_code) {
-
-        $result = 1;
-        l(LL_VERBOSE_SUCCESS,
-          "Yay. We expected status code " . $expected_status_code . ", and received: " . $status_code . '.');
-
-    } elsif (cli_option_is_set('fuzzer-feeding') and $status_code == 123) {
-
-        l(LL_VERBOSE_FAILURE,
-          "Oh well. Status code lost while fuzzing. Can't check if it was " . $expected_status_code . '.');
-
-    } else {
-
-        l(LL_VERBOSE_FAILURE,
-          "Ooops. We expected status code " . $expected_status_code . ", but received: " . $status_code . '.');
-    }
-    
-    return $result;
-}
-
-sub execute_client_header_regression_test ($) {
-
-    my $test_ref = shift;
-    my $buffer_ref;
-    my $header;
-
-    $buffer_ref = get_show_request_with_curl($test_ref);
-
-    $header = get_header($buffer_ref, $test_ref);
-
-    return check_header_result($test_ref, $header);
-}
-
-sub execute_server_header_regression_test ($) {
-
-    my $test_ref = shift;
-    my $buffer_ref;
-    my $header;
-
-    $buffer_ref = get_head_with_curl($test_ref);
-
-    $header = get_server_header($buffer_ref, $test_ref);
-
-    return check_header_result($test_ref, $header);
-}
-
-sub interpret_result ($) {
-    my $success = shift;
-    return $success ? "Success" : "Failure";
-}
-
-sub check_header_result ($$) {
-
-    my $test_ref = shift;
-    my $header = shift;
-
-    my %test = %{$test_ref};
-    my $expect_header = $test{'expect-header'};
-    my $success = 0;
-
-    if ($expect_header eq 'NO CHANGE') {
-
-        if (defined($header) and $header eq $test{'data'}) {
-
-            $success = 1;
-
-        } else {
-
-            $header = "REMOVAL" unless defined $header;
-            l(LL_VERBOSE_FAILURE,
-              "Ooops. Got: " . $header . " while expecting: " . $expect_header);
-        }
-
-    } elsif ($expect_header eq 'REMOVAL') {
-
-        if (defined($header) and $header eq $test{'data'}) {
-
-            l(LL_VERBOSE_FAILURE,
-              "Ooops. Expected removal but: " . $header . " is still there.");
-
-        } else {
-
-            # XXX: Use more reliable check here and make sure
-            # the header has a different name.
-            $success = 1;
-        }
-
-    } elsif ($expect_header eq 'SOME CHANGE') {
-
-        if (defined($header) and not $header eq $test{'data'}) {
-
-            $success = 1;
-
-        } else {
-
-            $header = "REMOVAL" unless defined $header;
-            l(LL_VERBOSE_FAILURE,
-              "Ooops. Got: " . $header . " while expecting: SOME CHANGE");
-        }
-
-
-    } else {
-
-        if (defined($header) and $header eq $expect_header) {
-
-            $success = 1;
-
-        } else {
-
-            $header = "'No matching header'" unless defined $header; # XXX: No header detected to be precise
-            l(LL_VERBOSE_FAILURE,
-              "Ooops. Got: " . $header . " while expecting: " . $expect_header);
-        }
-    }
-    return $success;
-}
-
-sub get_header_name ($) {
-
-    my $header = shift;
-
-    $header =~ s@(.*?: ).*@$1@;
-
-    return $header;
-}
-
-sub get_header ($$) {
-
-    our $filtered_request = '';
-
-    my $buffer_ref = shift;
-    my $test_ref = shift;
-
-    my %test = %{$test_ref};
-    my @buffer = @{$buffer_ref};
-
-    my $expect_header = $test{'expect-header'};
-
-    die "get_header called with no expect header" unless defined $expect_header;
-
-    my $line;
-    my $processed_request_reached = 0;
-    my $read_header = 0;
-    my $processed_request = '';
-    my $header;
-    my $header_to_get;
-
-    if ($expect_header eq 'REMOVAL'
-     or $expect_header eq 'NO CHANGE'
-     or  $expect_header eq 'SOME CHANGE') {
-
-        $expect_header = $test{'data'};
-
-    }
-
-    $header_to_get = get_header_name($expect_header);
-
-    foreach (@buffer) {
-
-        # Skip everything before the Processed request
-        if (/Processed Request/) {
-            $processed_request_reached = 1;
-            next;
-        }
-        next unless $processed_request_reached;
-
-        # End loop after the Processed request
-        last if (/<\/pre>/);
-
-        # Ditch tags and leading/trailing white space.
-        s@^\s*<.*?>@@g;
-        s@\s*$@@g;
-
-        # Decode characters we care about. 
-        s@&quot;@"@g;
-
-        $filtered_request .=  "\n" . $_;
-         
-        if (/^$header_to_get/) {
-            $read_header = 1;
-            $header = $_;
-            last;
-        }
-    }
-
-    return $header;
-}
-
-sub get_server_header ($$) {
-
-    my $buffer_ref = shift;
-    my $test_ref = shift;
-
-    my %test = %{$test_ref};
-    my @buffer = @{$buffer_ref};
-
-    my $expect_header = $test{'expect-header'};
-    my $header;
-    my $header_to_get;
-
-    # XXX: Should be caught before starting to test.
-    l(LL_ERROR, "No expect header for test " . $test{'number'})
-        unless defined $expect_header;
-
-    if ($expect_header eq 'REMOVAL'
-     or $expect_header eq 'NO CHANGE'
-     or $expect_header eq 'SOME CHANGE') {
-
-        $expect_header = $test{'data'};
-    }
-
-    $header_to_get = get_header_name($expect_header);
-
-    foreach (@buffer) {
-
-        # XXX: should probably verify that the request
-        # was actually answered by Fellatio.
-        if (/^$header_to_get/) {
-            $header = $_;
-            $header =~ s@\s*$@@g;
-            last;
-        }
-    }
-
-    return $header;
-}
-
-sub get_status_code ($) {
-
-    my $buffer_ref = shift;
-    my @buffer = @{$buffer_ref}; 
-
-    foreach (@buffer) {
-
-        if (/^HTTP\/\d\.\d (\d{3})/) {
-
-            return $1;
-
-        } else {
-
-            return '123' if cli_option_is_set('fuzzer-feeding');
-            chomp;
-            l(LL_ERROR, 'Unexpected buffer line: "' . $_ . '"');
-        }
-    }
-}
-
-sub get_test_keys () {
-    return ('tag', 'data', 'expect-header', 'ignore');
-}
-
-# XXX: incomplete
-sub test_content_as_string ($) {
-
-    my $test_ref = shift;
-    my %test = %{$test_ref};
-
-    my $s = "\n\t";
-
-    foreach my $key (get_test_keys()) {
-        $test{$key} = 'Not set' unless (defined $test{$key});
-    }
-
-    $s .= 'Tag: ' . $test{'tag'};
-    $s .= "\n\t";
-    $s .= 'Set header: ' . $test{'data'}; # XXX: adjust for other test types
-    $s .= "\n\t";
-    $s .= 'Expected header: ' . $test{'expect-header'};
-    $s .= "\n\t";
-    $s .= 'Ignore: ' . $test{'ignore'};
-
-    return $s;
-}
-
-sub fuzz_header($) {
-    my $header = shift;
-    my $white_space = int(rand(2)) - 1 ? " " : "\t";
-
-    $white_space = $white_space x (1 + int(rand(5)));
-
-    # Only fuzz white space before the first quoted token.
-    # (Privoxy doesn't touch white space inside quoted tokens
-    # and modifying it would cause the tests to fail).
-    $header =~ s@(^[^"]*?)\s@$1$white_space@g;
-
-    return $header;
-}
-
-############################################################################
-#
-# HTTP fetch functions
-#
-############################################################################
-
-sub check_for_curl () {
-    my $curl = CURL;
-    l(LL_ERROR, "No curl found.") unless (`which $curl`);
-}
-
-sub get_cgi_page_or_else ($) {
-
-    my $cgi_url = shift;
-    my $content_ref = get_page_with_curl($cgi_url);
-    my $status_code = get_status_code($content_ref);
-
-    if (200 != $status_code) {
-
-        my $log_message = "Failed to fetch Privoxy CGI Page. " .
-                          "Received status code ". $status_code .
-                          " while only 200 is acceptable.";
-
-        if (cli_option_is_set('fuzzer-feeding')) {
-
-            $log_message .= " Ignored due to fuzzer feeding.";
-            l(LL_SOFT_ERROR, $log_message)
-
-        } else {
-
-            l(LL_ERROR, $log_message);
-        }
-    }
-    
-    return $content_ref;
-}
-
-# XXX: misleading name
-sub get_show_request_with_curl ($) {
-
-    our $privoxy_cgi_url;
-    my $test_ref = shift;
-    my %test = %{$test_ref};
-
-    my $curl_parameters = ' ';
-    my $header = $test{'data'};
-
-    if (cli_option_is_set('header-fuzzing')) {
-        $header = fuzz_header($header);
-    }
-
-    # Enable the action to test
-    $curl_parameters .= '-H \'X-Privoxy-Control: ' . $test{'tag'} . '\' ';
-    # The header to filter
-    $curl_parameters .= '-H \'' . $header . '\' ';
-
-    $curl_parameters .= ' ';
-    $curl_parameters .= $privoxy_cgi_url;
-    $curl_parameters .= 'show-request';
-
-    return get_cgi_page_or_else($curl_parameters);
-}
-
-sub get_head_with_curl ($) {
-
-    our $fellatio_url = FELLATIO_URL;
-    my $test_ref = shift;
-    my %test = %{$test_ref};
-
-    my $curl_parameters = ' ';
-
-    # Enable the action to test
-    $curl_parameters .= '-H \'X-Privoxy-Control: ' . $test{'tag'} . '\' ';
-    # The header to filter
-    $curl_parameters .= '-H \'X-Gimme-Head-With: ' . $test{'data'} . '\' ';
-    $curl_parameters .= '--head ';
-
-    $curl_parameters .= ' ';
-    $curl_parameters .= $fellatio_url;
-
-    return get_page_with_curl($curl_parameters);
-}
-
-sub get_page_with_curl ($) {
-
-    our $proxy;
-
-    my $parameters = shift;
-    my @buffer;
-    my $curl_line = CURL;
-    my $retries_left = get_cli_option('retries') + 1;
-    my $failure_reason;
-
-    $curl_line .= ' --proxy ' . $proxy if (defined $proxy);
-
-    # We want to see the HTTP status code
-    $curl_line .= " --include ";
-    # Let Privoxy emit two log messages less.
-    $curl_line .= ' -H \'Proxy-Connection:\' ' unless $parameters =~ /Proxy-Connection:/;
-    $curl_line .= ' -H \'Connection: close\' ' unless $parameters =~ /Connection:/;
-    # We don't care about fetch statistic.
-    $curl_line .= " -s ";
-    # We do care about the failure reason if any.
-    $curl_line .= " -S ";
-    # We want to advertise ourselves
-    $curl_line .= " --user-agent '" . PRT_VERSION . "' ";
-    # We aren't too patient
-    $curl_line .= " --max-time '" . get_cli_option('max-time') . "' ";
-
-    $curl_line .= $parameters;
-    # XXX: still necessary?
-    $curl_line .= ' 2>&1';
-
-    l(LL_PAGE_FETCHING, "Executing: " . $curl_line);
-
-    do {
-        @buffer = `$curl_line`;
-
-        if ($?) {
-            $failure_reason = array_as_string(\@buffer);
-            chomp $failure_reason;
-            l(LL_SOFT_ERROR, "Fetch failure: '" . $failure_reason . $! ."'");
-        }
-    } while ($? && --$retries_left);
-
-    unless ($retries_left) {
-        l(LL_ERROR,
-          "Running curl failed " . get_cli_option('retries') .
-          " times in a row. Last error: '" . $failure_reason . "'.");
-    }
-
-    return \@buffer;
-}
-
-
-############################################################################
-#
-# Log functions
-#
-############################################################################
-
-sub array_as_string ($) {
-    my $array_ref = shift;
-    my $string = '';
-
-    foreach (@{$array_ref}) {
-        $string .= $_;
-    }
-
-    return $string;
-}
-
-sub show_test ($) {
-    my $test_ref = shift;
-    log_message('Test is:' . test_content_as_string($test_ref));
-}
-
-# Conditional log
-sub l ($$) {
-    our $log_level;
-    my $this_level = shift;
-    my $message = shift;
-
-    return unless ($log_level & $this_level);
-
-    if (LL_ERROR & $this_level) {
-        $message = 'Oh noes. ' . $message . ' Fatal error. Exiting.';
-    }
-
-    log_message($message);
-
-    if (LL_ERROR & $this_level) {
-        exit;
-    }
-}
-
-sub log_message ($) {
-
-    my $message = shift;
-
-    our $logfile;
-    our $no_logging;
-    our $leading_log_date;
-    our $leading_log_time;
-
-    my $time_stamp = '';
-    my ( $sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst ) = localtime time;
-
-    if ($leading_log_date || $leading_log_time) {
-
-        if ($leading_log_date) {
-            $year += 1900;
-            $mon  += 1;
-            $time_stamp = sprintf("%i/%.2i/%.2i", $year, $mon, $mday);
-        }
-
-        if ($leading_log_time) {
-            $time_stamp .= ' ' if $leading_log_date;
-            $time_stamp.= sprintf("%.2i:%.2i:%.2i", $hour, $min, $sec);
-        }
-        
-        $message = $time_stamp . ": " . $message;
-    }
-
-    printf(STDERR "%s\n", $message);
-}
-
-sub log_result ($$) {
-
-    our $verbose_test_description;
-    our $filtered_request;
-
-    my $test_ref = shift;
-    my $result = shift;
-    my $number = shift;
-
-    my %test = %{$test_ref};
-    my $message = '';
-
-    $message .= interpret_result($result);
-    $message .= " for test ";
-    $message .= $number;
-    $message .= '/';
-    $message .= $test{'number'};
-    $message .= '/';
-    $message .= $test{'section-id'};
-    $message .= '/';
-    $message .= $test{'regression-test-id'};
-    $message .= '.';
-
-    if ($verbose_test_description) {
-
-        if ($test{'type'} == CLIENT_HEADER_TEST) {
-
-            $message .= ' Header ';
-            $message .= quote($test{'data'});
-            $message .= ' and tag ';
-            $message .= quote($test{'tag'});
-
-        } elsif ($test{'type'} == SERVER_HEADER_TEST) {
-
-            $message .= ' Request Header ';
-            $message .= quote($test{'data'});
-            $message .= ' and tag ';
-            $message .= quote($test{'tag'});
-
-        } elsif ($test{'type'} == DUMB_FETCH_TEST) {
-
-            $message .= ' URL ';
-            $message .= quote($test{'data'});
-            $message .= ' and expected status code ';
-            $message .= quote($test{'expected-status-code'});
-
-        } elsif ($test{'type'} == TRUSTED_CGI_REQUEST) {
-
-            $message .= ' CGI URL ';
-            $message .= quote($test{'data'});
-            $message .= ' and expected status code ';
-            $message .= quote($test{'expected-status-code'});
-
-        } elsif ($test{'type'} == METHOD_TEST) {
-
-            $message .= ' HTTP method ';
-            $message .= quote($test{'data'});
-            $message .= ' and expected status code ';
-            $message .= quote($test{'expected-status-code'});
-
-        } elsif ($test{'type'} == BLOCK_TEST) {
-
-            $message .= ' Supposedly-blocked URL: ';
-            $message .= quote($test{'data'});
-
-        } elsif ($test{'type'} == STICKY_ACTIONS_TEST) {
-
-            $message .= ' Sticky Actions: ';
-            $message .= quote($test{'sticky-actions'});
-            $message .= ' and URL: ';
-            $message .= quote($test{'data'});
-
-        } else {
-
-            die "Incomplete support for test type " . $test{'type'} .  " detected.";
-        }
-    }
-
-    log_message($message) if (!$result or cli_option_is_set('verbose'));
-}
-
-sub quote ($) {
-    my $s = shift;
-    return '\'' . $s . '\'';
-}
-
-sub print_version () {
-    printf PRT_VERSION . "\n" . 'Copyright (C) 2007-2009 Fabian Keil <fk@xxxxxxxxxxxxx>' . "\n";
-}
-
-sub help () {
-
-    our %cli_options;
-
-    print_version();
-
-    print << "    EOF"
-
-Options and their default values if they have any:
-    [--debug $cli_options{'debug'}]
-    [--forks $cli_options{'forks'}]
-    [--fuzzer-address]
-    [--fuzzer-feeding]
-    [--help]
-    [--header-fuzzing]
-    [--level]
-    [--loops $cli_options{'loops'}]
-    [--max-level $cli_options{'max-level'}]
-    [--max-time $cli_options{'max-time'}]
-    [--min-level $cli_options{'min-level'}]
-    [--privoxy-address]
-    [--retries $cli_options{'retries'}]
-    [--show-skipped-tests]
-    [--test-number]
-    [--verbose]
-    [--version]
-see "perldoc $0" for more information
-    EOF
-    ;
-    exit(0);
-}
-
-sub init_cli_options () {
-
-    our %cli_options;
-    our $log_level;
-
-    $cli_options{'debug'}     = $log_level;
-    $cli_options{'forks'}     = CLI_FORKS;
-    $cli_options{'loops'}     = CLI_LOOPS;
-    $cli_options{'max-level'} = CLI_MAX_LEVEL;
-    $cli_options{'max-time'}  = CLI_MAX_TIME;
-    $cli_options{'min-level'} = CLI_MIN_LEVEL;
-    $cli_options{'retries'}   = CLI_RETRIES;
-}
-
-sub parse_cli_options () {
-
-    our %cli_options;
-    our $log_level;
-
-    init_cli_options();
-
-    GetOptions (
-        'debug=s'            => \$cli_options{'debug'},
-        'forks=s'            => \$cli_options{'forks'},
-        'fuzzer-address=s'   => \$cli_options{'fuzzer-address'},
-        'fuzzer-feeding'     => \$cli_options{'fuzzer-feeding'},
-        'header-fuzzing'     => \$cli_options{'header-fuzzing'},
-        'help'               => sub {help},
-        'level=s'            => \$cli_options{'level'},
-        'loops=s'            => \$cli_options{'loops'},
-        'max-level=s'        => \$cli_options{'max-level'},
-        'max-time=s'         => \$cli_options{'max-time'},
-        'min-level=s'        => \$cli_options{'min-level'},
-        'privoxy-address=s'  => \$cli_options{'privoxy-address'},
-        'retries=s'          => \$cli_options{'retries'},
-        'show-skipped-tests' => \$cli_options{'show-skipped-tests'},
-        'test-number=s'      => \$cli_options{'test-number'},
-        'verbose'            => \$cli_options{'verbose'},
-        'version'            => sub {print_version && exit(0)}
-    );
-    $log_level |= $cli_options{'debug'};
-}
-
-sub cli_option_is_set ($) {
-
-    our %cli_options;
-    my $cli_option = shift;
-
-    return defined $cli_options{$cli_option};
-}
-
-sub get_cli_option ($) {
-
-    our %cli_options;
-    my $cli_option = shift;
-
-    die "Unknown CLI option: $cli_option" unless defined $cli_options{$cli_option};
-
-    return $cli_options{$cli_option};
-}
-
-sub init_proxy_settings($) {
-
-    my $choice = shift;
-    our $proxy = undef;
-
-    if (($choice eq 'fuzz-proxy') and cli_option_is_set('fuzzer-address')) {
-        $proxy = get_cli_option('fuzzer-address');
-    }
-
-    if ((not defined $proxy) or ($choice eq 'vanilla-proxy')) {
-
-        if (cli_option_is_set('privoxy-address')) {
-            $proxy .=  get_cli_option('privoxy-address');
-        }
-
-    }
-}
-
-sub start_forks($) {
-    my $forks = shift;
-
-    l(LL_ERROR, "Invalid --fork value: " . $forks . ".") if ($forks < 0); 
-
-    foreach my $fork (1 .. $forks) {
-        log_message("Starting fork $fork");
-        my $pid = fork();
-        if (defined $pid && !$pid) {
-            return;
-        }
-    }
-}
-
-sub main () {
-
-    init_our_variables();
-    parse_cli_options();
-    check_for_curl();
-    init_proxy_settings('vanilla-proxy');
-    load_regressions_tests();
-    init_proxy_settings('fuzz-proxy');
-    start_forks(get_cli_option('forks')) if cli_option_is_set('forks');
-    execute_regression_tests();
-}
-
-main();
-
-=head1 NAME
-
-B<privoxy-regression-test> - A regression test "framework" for Privoxy.
-
-=head1 SYNOPSIS
-
-B<privoxy-regression-test> [B<--debug bitmask>] [B<--forks> forks]
-[B<--fuzzer-feeding>] [B<--fuzzer-feeding>] [B<--help>] [B<--level level>]
-[B<--loops count>] [B<--max-level max-level>] [B<--max-time max-time>]
-[B<--min-level min-level>] B<--privoxy-address proxy-address>
-[B<--retries retries>] [B<--test-number test-number>]
-[B<--show-skipped-tests>] [B<--verbose>]
-[B<--version>]
-
-=head1 DESCRIPTION
-
-Privoxy-Regression-Test is supposed to one day become
-a regression test suite for Privoxy. It's not quite there
-yet, however, and can currently only test header actions,
-check the returned status code for requests to arbitrary
-URLs and verify which actions are applied to them.
-
-Client header actions are tested by requesting
-B<http://p.p/show-request> and checking whether
-or not Privoxy modified the original request as expected.
-
-The original request contains both the header the action-to-be-tested
-acts upon and an additional tagger-triggering header that enables
-the action to test.
-
-Applied actions are checked through B<http://p.p/show-url-info>.
-
-=head1 CONFIGURATION FILE SYNTAX
-
-Privoxy-Regression-Test's configuration is embedded in
-Privoxy action files and loaded through Privoxy's web interface.
-
-It makes testing a Privoxy version running on a remote system easier
-and should prevent you from updating your tests without updating Privoxy's
-configuration accordingly.
-
-A client-header-action test section looks like this:
-
-    # Set Header    = Referer: http://www.example.org.zwiebelsuppe.exit/
-    # Expect Header = Referer: http://www.example.org/
-    {+client-header-filter{hide-tor-exit-notation} -hide-referer}
-    TAG:^client-header-filter\{hide-tor-exit-notation\}$
-
-The example above causes Privoxy-Regression-Test to set
-the header B<Referer: http://www.example.org.zwiebelsuppe.exit/>
-and to expect it to be modified to
-B<Referer: http://www.example.org/>.
-
-When testing this section, Privoxy-Regression-Test will set the header
-B<X-Privoxy-Control: client-header-filter{hide-tor-exit-notation}>
-causing the B<privoxy-control> tagger to create the tag
-B<client-header-filter{hide-tor-exit-notation}> which will finally
-cause Privoxy to enable the action section.
-
-Note that the actions itself are only used by Privoxy,
-Privoxy-Regression-Test ignores them and will be happy
-as long as the expectations are satisfied.
-
-A fetch test looks like this:
-
-    # Fetch Test = http://p.p/user-manual
-    # Expect Status Code = 302
-
-It tells Privoxy-Regression-Test to request B<http://p.p/user-manual>
-and to expect a response with the HTTP status code B<302>. Obviously that's
-not a very thorough test and mainly useful to get some code coverage
-for Valgrind or to verify that the templates are installed correctly.
-
-If you want to test CGI pages that require a trusted
-referer, you can use:
-
-    # Trusted CGI Request = http://p.p/edit-actions
-
-It works like ordinary fetch tests, but sets the referer
-header to a trusted value.
-
-If no explicit status code expectation is set, B<200> is used.
-
-To verify that a URL is blocked, use:
-
-    # Blocked URL = http://www.example.com/blocked
-
-To verify that a specific set of actions is applied to an URL, use:
-
-    # Sticky Actions = +block{foo} +handle-as-empty-document -handle-as-image
-    # URL = http://www.example.org/my-first-url
-
-The sticky actions will be checked for all URLs below it
-until the next sticky actions directive.
-
-=head1 TEST LEVELS
-
-All tests have test levels to let the user
-control which ones to execute (see I<OPTIONS> below). 
-Test levels are either set with the B<Level> directive,
-or implicitly through the test type.
-
-Block tests default to level 7, fetch tests to level 6,
-"Sticky Actions" tests default to level 5, tests for trusted CGI
-requests to level 3 and client-header-action tests to level 1.
-
-=head1 OPTIONS
-
-B<--debug bitmask> Add the bitmask provided as integer
-to the debug settings.
-
-B<--forks forks> Number of forks to start before executing
-the regression tests. This is mainly useful for stress-testing.
-
-B<--fuzzer-address> Listening address used when executing
-the regression tests. Useful to make sure that the requests
-to load the regression tests don't fail due to fuzzing.
-
-B<--fuzzer-feeding> Ignore some errors that would otherwise
-cause Privoxy-Regression-Test to abort the test because
-they shouldn't happen in normal operation. This option is
-intended to be used if Privoxy-Regression-Test is only
-used to feed a fuzzer in which case there's a high chance
-that Privoxy gets an invalid request and returns an error
-message.
-
-B<--help> Shows available command line options.
-
-B<--header-fuzzing> Modifies linear white space in
-headers in a way that should not affect the test result.
-
-B<--level level> Only execute tests with the specified B<level>. 
-
-B<--loop count> Loop through the regression tests B<count> times. 
-Useful to feed a fuzzer, or when doing stress tests with
-several Privoxy-Regression-Test instances running at the same
-time.
-
-B<--max-level max-level> Only execute tests with a B<level>
-below or equal to the numerical B<max-level>.
-
-B<--max-time max-time> Give Privoxy B<max-time> seconds
-to return data. Increasing the default may make sense when
-Privoxy is run through Valgrind, decreasing the default may
-make sense when Privoxy-Regression-Test is used to feed
-a fuzzer.
-
-B<--min-level min-level> Only execute tests with a B<level>
-above or equal to the numerical B<min-level>.
-
-B<--privoxy-address proxy-address> Privoxy's listening address.
-If it's not set, the value of the environment variable http_proxy
-will be used. B<proxy-address> has to be specified in http_proxy
-syntax.
-
-B<--retries retries> Retry B<retries> times.
-
-B<--test-number test-number> Only run the test with the specified
-number.
-
-B<--show-skipped-tests> Log skipped tests even if verbose mode is off.
-
-B<--verbose> Log succesful and skipped tests.
-
-B<--version> Print version and exit.
-
-The second dash is optional, options can be shortened,
-as long as there are no ambiguities.
-
-=head1 PRIVOXY CONFIGURATION
-
-Privoxy-Regression-Test is shipped with B<regression-tests.action>
-which aims to test all official client-header modifying actions
-and can be used to verify that the templates and the user manual
-files are installed correctly.
-
-To use it, it has to be copied in Privoxy's configuration
-directory, and afterwards referenced in Privoxy's configuration
-file with the line:
-
-    actionsfile regression-tests.action
-
-In general, its tests are supposed to work without changing
-any other action files, unless you already added lots of
-taggers yourself. If you are using taggers that cause problems,
-you might have to temporary disable them for Privoxy's CGI pages.
-
-Some of the regression tests rely on Privoxy features that
-may be disabled in your configuration. Tests with a level below
-7 are supposed to work with all Privoxy configurations (provided
-you didn't build with FEATURE_GRACEFUL_TERMINATION).
-
-Tests with level 9 require Privoxy to deliver the User Manual,
-tests with level 12 require the CGI editor to be enabled.
-
-=head1 CAVEATS
-
-Expect the configuration file syntax to change with future releases.
-
-=head1 LIMITATIONS
-
-As Privoxy's B<show-request> page only shows client headers,
-Privoxy-Regression-Test can't use it to test Privoxy actions
-that modify server headers.
-
-As Privoxy-Regression-Test relies on Privoxy's tag feature to
-control the actions to test, it currently only works with
-Privoxy 3.0.7 or later.
-
-At the moment Privoxy-Regression-Test fetches Privoxy's
-configuration page through I<curl>(1), therefore you have to
-have I<curl> installed, otherwise you won't be able to run
-Privoxy-Regression-Test in a meaningful way.
-
-=head1 SEE ALSO
-
-privoxy(1) curl(1)
-
-=head1 AUTHOR
-
-Fabian Keil <fk@xxxxxxxxxxxxx>
-
-=cut
diff --git a/external/privoxy/tools/url-pattern-translator.pl b/external/privoxy/tools/url-pattern-translator.pl
deleted file mode 100755
index a575333..0000000
--- a/external/privoxy/tools/url-pattern-translator.pl
+++ /dev/null
@@ -1,139 +0,0 @@
-#!/usr/bin/perl
-
-############################################################################
-#
-# url-pattern-translator
-#
-# Filters Privoxy action files and changes old-school URL patterns to
-# use extended regular expressions for the host as well.
-#
-# While it works good enough to satisfy the regression tests in
-# default.action.master, it isn't perfect and you should double-check
-# the output and keep backups of your old action files.
-#
-# Usage:
-#
-# url-pattern-translator.pl old.action > new.action 
-#
-# Only convert your files once, or, as RoboCop used to say,
-# there will be... trouble.
-#
-# $Id: url-pattern-translator.pl,v 1.3 2009/01/13 17:01:04 fabiankeil Exp $
-#
-# Copyright (c) 2008 Fabian Keil <fk@xxxxxxxxxxxxx>
-#
-# Permission to use, copy, modify, and distribute this software for any
-# purpose with or without fee is hereby granted, provided that the above
-# copyright notice and this permission notice appear in all copies.
-#
-# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-#
-############################################################################
-
-use strict;
-use warnings;
-
-sub p ($) {
-    my $message = shift;
-    print $message . "\n";
-}
-
-sub convert_host_pattern ($) {
-    my $host_pattern = shift;
-    my $hp = $host_pattern;
-
-    $hp =~ s@\s@@g;
-
-    if ($hp =~ m@^\.@) {
-        # Not left-anchored
-        #
-        # XXX: This is somewhat ugly and while it's
-        # the equivalent pattern in most cases
-        # \. should be good enough.
-        $hp =~ s@^\.@(^|.)@;
-    } else {
-        # left-anchored
-        $hp = '^' . $hp;
-    }
-
-    # Match-all syntax has changed ...
-    $hp =~ s@\*@.*@g;
-
-    # Extended host patterns are right-anchored by default
-    $hp =~ s@\.$@(\..*)?@;
-
-    # Literal dots have to be escaped    
-    $hp =~ s@((?<!\\)\.[^*])@\\$1@g;
-
-    # Match single character with a dot.
-    $hp =~ s@(?<!\))\?@.@g;
-
-    return $hp;
-}
-
-sub looks_interesting($) {
-    my $line = shift;
-    my $type_to_skip = undef;
-
-    if (/^\s*\#/) {
-
-        $type_to_skip = "comment";
-
-    } elsif (/[{}]/ or /\\$/) {
-
-        $type_to_skip = "action settings";
-
-    } elsif (m@^\s*$@) {
-
-        $type_to_skip = "whitespace";
-
-    } elsif (m@^\s*TAG:@) {
-
-        $type_to_skip = "tag patttern";
-
-    } elsif (m@^[^/]*=@) {
-
-        $type_to_skip = "macro or version definition";
-
-    } elsif (m@^\s*standard\.@) {
-
-        $type_to_skip = "predefined settings";
-
-    }
-
-    #p("Skipping " . $type_to_skip . ": " . $_) if defined $type_to_skip;
-
-    return not defined $type_to_skip;
-}
-
-sub main () {
-    my $host = undef;
-    my $path = undef;
- 
-    while (<>) {
-        chomp;
-
-        if (looks_interesting($_)) {
-            if (m@^([^/]+)(/.*)$@) {
-                $host = $1;
-                $path = $2;
-                $host = convert_host_pattern($host);
-                $_ = $host . $path;
-            }
-            elsif (m@^([^/]*)$@) {
-                $host = $1;
-                $host = convert_host_pattern($host);
-                $_ = $host;
-            }
-        }
-        p($_);
-    }
-}
-
-main();
diff --git a/external/privoxy/trust b/external/privoxy/trust
deleted file mode 100644
index 5767363..0000000
--- a/external/privoxy/trust
+++ /dev/null
@@ -1,85 +0,0 @@
-######################################################################
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/trust,v $
-# 
-#  $Id: trust,v 1.6 2007/05/14 17:19:42 fabiankeil Exp $
-#
-#  Purpose     :  Trustfiles are an experimental feature and can be used
-#                 to build "whitelists" (versus the usual "blacklists"
-#                 techniques).
-# 
-#  Copyright   :  Written by and Copyright
-#                 Privoxy team. http://www.privoxy.org/
-#
-#                 Based on the Internet Junkbuster originally written
-#                 by and Copyright (C) 1997 Anonymous Coders and
-#                 Junkbusters Corporation.  http://www.junkbusters.com
-#
-# We value your feedback. However, to provide you with the best support,
-# please note:
-#  
-#  * Use the support forum to get help:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=211118
-#  * Submit bugs only thru our bug forum:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=111118 
-#    Make sure that the bug has not already been submitted. Please try
-#    to verify that it is a Privoxy bug, and not a browser or site
-#    bug first. If you are using your own custom configuration, please
-#    try the stock configs to see if the problem is a configuration
-#    related bug. And if not using the latest development snapshot,
-#    please try the latest one. Or even better, CVS sources.
-#  * Submit feature requests only thru our feature request tracker:
-#    http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse
-#      
-# For any other issues, feel free to use the mailing lists:
-# http://sourceforge.net/mail/?group_id=11118
-#    
-# Anyone interested in actively participating in development and related
-# discussions can join the appropriate mailing list here:
-# http://sourceforge.net/mail/?group_id=11118. Archives are available
-# here too.
-# 
-######################################################################
-#
-#                      Sample Trustfile for Privoxy
-
-# For this file to have any effect, the line in the main config file beginning
-# with "trustfile" must be uncommented, with the name of this file following the
-# word "trustfile".
-
-# Trustfiles are an experimental feature used for building "whitelists"
-# of "trusted" sites (versus the usual "blacklists" technique). For more
-# detail, see http://www.privoxy.org/user-manual/config.html#TRUSTFILE.
-
-# List trusted domains here. The default is to block any URL that is NOT
-# referenced. Access to trusted domains includes all paths within that
-# domain.
-
-# Preceding a domain with a '+' character will designate that domain
-# as a "trusted referrer", meaning any requests whose HTTP "Referer" headers
-# contain an URL from that domain will be allowed, and the previously untrusted
-# host will be dynamically added to this file. Thus, this builds a "white-list"
-# of hosts the user is allowed to visit.
-
-# Note this means that the file will grow with use!
-
-# Also note that you can only trust referrers if you control the user's
-# system and make sure that there are no programs available that allow
-# to set arbitrary headers.
-
-# Preceding the domain with '~' character allows access to that domain only
-# (including all paths within that domain), but does not allow access to links
-# to other, outside domains. Sites that are added dynamically by trusted 
-# referrers will include the '~' character, and thus do not become trusted
-# referrers themselves.
-
-# Example: to allow example.com and to white-list domains that appear to
-# be reached through links from example.com, uncomment this line:
-
-# +example.com 
-
-# The next two lines make sure that the user can access Privoxy's
-# CGI pages, without automatically trusting their links.
-
-~config.privoxy.org
-~p.p
diff --git a/external/privoxy/urlmatch.c b/external/privoxy/urlmatch.c
deleted file mode 100644
index 47b607c..0000000
--- a/external/privoxy/urlmatch.c
+++ /dev/null
@@ -1,1452 +0,0 @@
-const char urlmatch_rcs[] = "$Id: urlmatch.c,v 1.47 2009/03/02 19:18:10 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/urlmatch.c,v $
- *
- * Purpose     :  Declares functions to match URLs against URL
- *                patterns.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009
- *                the Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: urlmatch.c,v $
- *    Revision 1.47  2009/03/02 19:18:10  fabiankeil
- *    Streamline parse_http_request()'s prototype. As
- *    cparser pointed out it doesn't actually use csp.
- *
- *    Revision 1.46  2009/02/11 19:31:32  fabiankeil
- *    Reject request lines that end with neither HTTP/1.0 nor HTTP/1.1.
- *
- *    Revision 1.45  2008/06/21 21:19:18  fabiankeil
- *    Silence bogus compiler warning.
- *
- *    Revision 1.44  2008/05/04 16:18:32  fabiankeil
- *    Provide parse_http_url() with a third parameter to specify
- *    whether or not URLs without protocol are acceptable.
- *
- *    Revision 1.43  2008/05/04 13:30:55  fabiankeil
- *    Streamline parse_http_url()'s prototype.
- *
- *    Revision 1.42  2008/05/04 13:24:16  fabiankeil
- *    If the method isn't CONNECT, reject URLs without protocol.
- *
- *    Revision 1.41  2008/05/02 09:51:34  fabiankeil
- *    In parse_http_url(), don't muck around with values
- *    that are none of its business: require an initialized
- *    http structure and never unset http->ssl.
- *
- *    Revision 1.40  2008/04/23 16:12:28  fabiankeil
- *    Free with freez().
- *
- *    Revision 1.39  2008/04/22 16:27:42  fabiankeil
- *    In parse_http_request(), remove a pointless
- *    temporary variable and free the buffer earlier.
- *
- *    Revision 1.38  2008/04/18 05:17:18  fabiankeil
- *    Mark simplematch()'s parameters as immutable.
- *
- *    Revision 1.37  2008/04/17 14:53:29  fabiankeil
- *    Move simplematch() into urlmatch.c as it's only
- *    used to match (old-school) domain patterns.
- *
- *    Revision 1.36  2008/04/14 18:19:48  fabiankeil
- *    Remove now-pointless cast in create_url_spec().
- *
- *    Revision 1.35  2008/04/14 18:11:21  fabiankeil
- *    The compiler might not notice it, but the buffer passed to
- *    create_url_spec() is modified later on and thus shouldn't
- *    be declared immutable.
- *
- *    Revision 1.34  2008/04/13 13:32:07  fabiankeil
- *    Factor URL pattern compilation out of create_url_spec().
- *
- *    Revision 1.33  2008/04/12 14:03:13  fabiankeil
- *    Remove an obvious comment and improve another one.
- *
- *    Revision 1.32  2008/04/12 12:38:06  fabiankeil
- *    Factor out duplicated code to compile host, path and tag patterns.
- *
- *    Revision 1.31  2008/04/10 14:41:04  fabiankeil
- *    Ditch url_spec's path member now that it's no longer used.
- *
- *    Revision 1.30  2008/04/10 04:24:24  fabiankeil
- *    Stop duplicating the plain text representation of the path regex
- *    (and keeping the copy around). Once the regex is compiled it's no
- *    longer useful.
- *
- *    Revision 1.29  2008/04/10 04:17:56  fabiankeil
- *    In url_match(), check the right member for NULL when determining
- *    whether there's a path regex to execute. Looking for a plain-text
- *    representation works as well, but it looks "interesting" and that
- *    member will be removed soonish anyway.
- *
- *    Revision 1.28  2008/04/08 16:07:39  fabiankeil
- *    Make it harder to mistake url_match()'s
- *    second parameter for an url_spec.
- *
- *    Revision 1.27  2008/04/08 15:44:33  fabiankeil
- *    Save a bit of memory (and a few cpu cycles) by not bothering to
- *    compile slash-only path regexes that don't affect the result.
- *
- *    Revision 1.26  2008/04/07 16:57:18  fabiankeil
- *    - Use free_url_spec() more consistently.
- *    - Let it reset url->dcount just in case.
- *
- *    Revision 1.25  2008/04/06 15:18:38  fabiankeil
- *    Oh well, rename the --enable-pcre-host-patterns option to
- *    --enable-extended-host-patterns as it's not really PCRE syntax.
- *
- *    Revision 1.24  2008/04/06 14:54:26  fabiankeil
- *    Use PCRE syntax in host patterns when configured
- *    with --enable-pcre-host-patterns.
- *
- *    Revision 1.23  2008/04/05 12:19:20  fabiankeil
- *    Factor compile_host_pattern() out of create_url_spec().
- *
- *    Revision 1.22  2008/03/30 15:02:32  fabiankeil
- *    SZitify unknown_method().
- *
- *    Revision 1.21  2007/12/24 16:34:23  fabiankeil
- *    Band-aid (and micro-optimization) that makes it less likely to run out of
- *    stack space with overly-complex path patterns. Probably masks the problem
- *    reported by Lee in #1856679. Hohoho.
- *
- *    Revision 1.20  2007/09/02 15:31:20  fabiankeil
- *    Move match_portlist() from filter.c to urlmatch.c.
- *    It's used for url matching, not for filtering.
- *
- *    Revision 1.19  2007/09/02 13:42:11  fabiankeil
- *    - Allow port lists in url patterns.
- *    - Ditch unused url_spec member pathlen.
- *
- *    Revision 1.18  2007/07/30 16:42:21  fabiankeil
- *    Move the method check into unknown_method()
- *    and loop through the known methods instead
- *    of using a screen-long OR chain.
- *
- *    Revision 1.17  2007/04/15 16:39:21  fabiankeil
- *    Introduce tags as alternative way to specify which
- *    actions apply to a request. At the moment tags can be
- *    created based on client and server headers.
- *
- *    Revision 1.16  2007/02/13 13:59:24  fabiankeil
- *    Remove redundant log message.
- *
- *    Revision 1.15  2007/01/28 16:11:23  fabiankeil
- *    Accept WebDAV methods for subversion
- *    in parse_http_request(). Closes FR 1581425.
- *
- *    Revision 1.14  2007/01/06 14:23:56  fabiankeil
- *    Fix gcc43 warnings. Mark *csp as immutable
- *    for parse_http_url() and url_match().
- *    Replace a sprintf call with snprintf.
- *
- *    Revision 1.13  2006/12/06 19:50:54  fabiankeil
- *    parse_http_url() now handles intercepted
- *    HTTP request lines as well. Moved parts
- *    of parse_http_url()'s code into
- *    init_domain_components() so that it can
- *    be reused in chat().
- *
- *    Revision 1.12  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.10.2.7  2003/05/17 15:57:24  oes
- *     - parse_http_url now checks memory allocation failure for
- *       duplication of "*" URL and rejects "*something" URLs
- *       Closes bug #736344
- *     - Added a comment to what might look like a bug in
- *       create_url_spec (see !bug #736931)
- *     - Comment cosmetics
- *
- *    Revision 1.10.2.6  2003/05/07 12:39:48  oes
- *    Fix typo: Default port for https URLs is 443, not 143.
- *    Thanks to Scott Tregear for spotting this one.
- *
- *    Revision 1.10.2.5  2003/02/28 13:09:29  oes
- *    Fixed a rare double free condition as per Bug #694713
- *
- *    Revision 1.10.2.4  2003/02/28 12:57:44  oes
- *    Moved freeing of http request structure to its owner
- *    as per Dan Price's observations in Bug #694713
- *
- *    Revision 1.10.2.3  2002/11/12 16:50:40  oes
- *    Fixed memory leak in parse_http_request() reported by Oliver Stoeneberg. Fixes bug #637073
- *
- *    Revision 1.10.2.2  2002/09/25 14:53:15  oes
- *    Added basic support for OPTIONS and TRACE HTTP methods:
- *    parse_http_url now recognizes the "*" URI as well as
- *    the OPTIONS and TRACE method keywords.
- *
- *    Revision 1.10.2.1  2002/06/06 19:06:44  jongfoster
- *    Adding support for proprietary Microsoft WebDAV extensions
- *
- *    Revision 1.10  2002/05/12 21:40:37  jongfoster
- *    - Removing some unused code
- *
- *    Revision 1.9  2002/04/04 00:36:36  gliptak
- *    always use pcre for matching
- *
- *    Revision 1.8  2002/04/03 23:32:47  jongfoster
- *    Fixing memory leak on error
- *
- *    Revision 1.7  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.6  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.5  2002/03/13 00:27:05  jongfoster
- *    Killing warnings
- *
- *    Revision 1.4  2002/03/07 03:46:17  oes
- *    Fixed compiler warnings
- *
- *    Revision 1.3  2002/03/03 14:51:11  oes
- *    Fixed CLF logging: Added ocmd member for client's request to struct http_request
- *
- *    Revision 1.2  2002/01/21 00:14:09  jongfoster
- *    Correcting comment style
- *    Fixing an uninitialized memory bug in create_url_spec()
- *
- *    Revision 1.1  2002/01/17 20:53:46  jongfoster
- *    Moving all our URL and URL pattern parsing code to the same file - it
- *    was scattered around in filters.c, loaders.c and parsers.c.
- *
- *    Providing a single, simple url_match(pattern,url) function - rather than
- *    the 3-line match routine which was repeated all over the place.
- *
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Providing parse_http_url() so that URLs can be parsed without faking a
- *    HTTP request line for parse_http_request() or repeating the parsing
- *    code (both of which were techniques that were actually in use).
- *
- *    Standardizing that struct http_request is used to represent a URL, and
- *    struct url_spec is used to represent a URL pattern.  (Before, URLs were
- *    represented as seperate variables and a partially-filled-in url_spec).
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#ifndef _WIN32
-#include <stdio.h>
-#include <sys/types.h>
-#endif
-
-#include <stdlib.h>
-#include <ctype.h>
-#include <assert.h>
-#include <string.h>
-
-#if !defined(_WIN32) && !defined(__OS2__)
-#include <unistd.h>
-#endif
-
-#include "project.h"
-#include "urlmatch.h"
-#include "ssplit.h"
-#include "miscutil.h"
-#include "errlog.h"
-
-const char urlmatch_h_rcs[] = URLMATCH_H_VERSION;
-
-enum regex_anchoring {NO_ANCHORING, LEFT_ANCHORED, RIGHT_ANCHORED};
-static jb_err compile_host_pattern(struct url_spec *url, const char *host_pattern);
-
-/*********************************************************************
- *
- * Function    :  free_http_request
- *
- * Description :  Freez a http_request structure
- *
- * Parameters  :
- *          1  :  http = points to a http_request structure to free
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_http_request(struct http_request *http)
-{
-   assert(http);
-
-   freez(http->cmd);
-   freez(http->ocmd);
-   freez(http->gpc);
-   freez(http->host);
-   freez(http->url);
-   freez(http->hostport);
-   freez(http->path);
-   freez(http->ver);
-   freez(http->host_ip_addr_str);
-   freez(http->dbuffer);
-   freez(http->dvec);
-   http->dcount = 0;
-}
-
-
-/*********************************************************************
- *
- * Function    :  init_domain_components
- *
- * Description :  Splits the domain name so we can compare it
- *                against wildcards. It used to be part of
- *                parse_http_url, but was separated because the
- *                same code is required in chat in case of
- *                intercepted requests.
- *
- * Parameters  :
- *          1  :  http = pointer to the http structure to hold elements.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out of memory
- *                JB_ERR_PARSE on malformed command/URL
- *                             or >100 domains deep.
- *
- *********************************************************************/
-jb_err init_domain_components(struct http_request *http)
-{
-   char *vec[BUFFER_SIZE];
-   size_t size;
-   char *p;
-
-   http->dbuffer = strdup(http->host);
-   if (NULL == http->dbuffer)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   /* map to lower case */
-   for (p = http->dbuffer; *p ; p++)
-   {
-      *p = (char)tolower((int)(unsigned char)*p);
-   }
-
-   /* split the domain name into components */
-   http->dcount = ssplit(http->dbuffer, ".", vec, SZ(vec), 1, 1);
-
-   if (http->dcount <= 0)
-   {
-      /*
-       * Error: More than SZ(vec) components in domain
-       *    or: no components in domain
-       */
-      log_error(LOG_LEVEL_ERROR, "More than SZ(vec) components in domain or none at all.");
-      return JB_ERR_PARSE;
-   }
-
-   /* save a copy of the pointers in dvec */
-   size = (size_t)http->dcount * sizeof(*http->dvec);
-
-   http->dvec = (char **)malloc(size);
-   if (NULL == http->dvec)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   memcpy(http->dvec, vec, size);
-
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  parse_http_url
- *
- * Description :  Parse out the host and port from the URL.  Find the
- *                hostname & path, port (if ':'), and/or password (if '@')
- *
- * Parameters  :
- *          1  :  url = URL (or is it URI?) to break down
- *          2  :  http = pointer to the http structure to hold elements.
- *                       Must be initialized with valid values (like NULLs).
- *          3  :  require_protocol = Whether or not URLs without
- *                                   protocol are acceptable.
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out of memory
- *                JB_ERR_PARSE on malformed command/URL
- *                             or >100 domains deep.
- *
- *********************************************************************/
-jb_err parse_http_url(const char *url, struct http_request *http, int require_protocol)
-{
-   int host_available = 1; /* A proxy can dream. */
-
-   /*
-    * Save our initial URL
-    */
-   http->url = strdup(url);
-   if (http->url == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-
-   /*
-    * Check for * URI. If found, we're done.
-    */  
-   if (*http->url == '*')
-   {
-      if  ( NULL == (http->path = strdup("*"))
-         || NULL == (http->hostport = strdup("")) ) 
-      {
-         return JB_ERR_MEMORY;
-      }
-      if (http->url[1] != '\0')
-      {
-         return JB_ERR_PARSE;
-      }
-      return JB_ERR_OK;
-   }
-
-
-   /*
-    * Split URL into protocol,hostport,path.
-    */
-   {
-      char *buf;
-      char *url_noproto;
-      char *url_path;
-
-      buf = strdup(url);
-      if (buf == NULL)
-      {
-         return JB_ERR_MEMORY;
-      }
-
-      /* Find the start of the URL in our scratch space */
-      url_noproto = buf;
-      if (strncmpic(url_noproto, "http://";,  7) == 0)
-      {
-         url_noproto += 7;
-      }
-      else if (strncmpic(url_noproto, "https://";, 8) == 0)
-      {
-         /*
-          * Should only happen when called from cgi_show_url_info().
-          */
-         url_noproto += 8;
-         http->ssl = 1;
-      }
-      else if (*url_noproto == '/')
-      {
-        /*
-         * Short request line without protocol and host.
-         * Most likely because the client's request
-         * was intercepted and redirected into Privoxy.
-         */
-         http->host = NULL;
-         host_available = 0;
-      }
-      else if (require_protocol)
-      {
-         freez(buf);
-         return JB_ERR_PARSE;
-      }
-
-      url_path = strchr(url_noproto, '/');
-      if (url_path != NULL)
-      {
-         /*
-          * Got a path.
-          *
-          * NOTE: The following line ignores the path for HTTPS URLS.
-          * This means that you get consistent behaviour if you type a
-          * https URL in and it's parsed by the function.  (When the
-          * URL is actually retrieved, SSL hides the path part).
-          */
-         http->path = strdup(http->ssl ? "/" : url_path);
-         *url_path = '\0';
-         http->hostport = strdup(url_noproto);
-      }
-      else
-      {
-         /*
-          * Repair broken HTTP requests that don't contain a path,
-          * or CONNECT requests
-          */
-         http->path = strdup("/");
-         http->hostport = strdup(url_noproto);
-      }
-
-      freez(buf);
-
-      if ( (http->path == NULL)
-        || (http->hostport == NULL))
-      {
-         return JB_ERR_MEMORY;
-      }
-   }
-
-   if (!host_available)
-   {
-      /* Without host, there is nothing left to do here */
-      return JB_ERR_OK;
-   }
-
-   /*
-    * Split hostport into user/password (ignored), host, port.
-    */
-   {
-      char *buf;
-      char *host;
-      char *port;
-
-      buf = strdup(http->hostport);
-      if (buf == NULL)
-      {
-         return JB_ERR_MEMORY;
-      }
-
-      /* check if url contains username and/or password */
-      host = strchr(buf, '@');
-      if (host != NULL)
-      {
-         /* Contains username/password, skip it and the @ sign. */
-         host++;
-      }
-      else
-      {
-         /* No username or password. */
-         host = buf;
-      }
-
-      /* check if url contains port */
-      port = strchr(host, ':');
-      if (port != NULL)
-      {
-         /* Contains port */
-         /* Terminate hostname and point to start of port string */
-         *port++ = '\0';
-         http->port = atoi(port);
-      }
-      else
-      {
-         /* No port specified. */
-         http->port = (http->ssl ? 443 : 80);
-      }
-
-      http->host = strdup(host);
-
-      freez(buf);
-
-      if (http->host == NULL)
-      {
-         return JB_ERR_MEMORY;
-      }
-   }
-
-   /*
-    * Split domain name so we can compare it against wildcards
-    */
-   return init_domain_components(http);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  unknown_method
- *
- * Description :  Checks whether a method is unknown.
- *
- * Parameters  :
- *          1  :  method = points to a http method
- *
- * Returns     :  TRUE if it's unknown, FALSE otherwise.
- *
- *********************************************************************/
-static int unknown_method(const char *method)
-{
-   static const char *known_http_methods[] = {
-      /* Basic HTTP request type */
-      "GET", "HEAD", "POST", "PUT", "DELETE", "OPTIONS", "TRACE", "CONNECT",
-      /* webDAV extensions (RFC2518) */
-      "PROPFIND", "PROPPATCH", "MOVE", "COPY", "MKCOL", "LOCK", "UNLOCK",
-      /*
-       * Microsoft webDAV extension for Exchange 2000.  See:
-       * http://lists.w3.org/Archives/Public/w3c-dist-auth/2002JanMar/0001.html
-       * http://msdn.microsoft.com/library/en-us/wss/wss/_webdav_methods.asp
-       */ 
-      "BCOPY", "BMOVE", "BDELETE", "BPROPFIND", "BPROPPATCH",
-      /*
-       * Another Microsoft webDAV extension for Exchange 2000.  See:
-       * http://systems.cs.colorado.edu/grunwald/MobileComputing/Papers/draft-cohen-gena-p-base-00.txt
-       * http://lists.w3.org/Archives/Public/w3c-dist-auth/2002JanMar/0001.html
-       * http://msdn.microsoft.com/library/en-us/wss/wss/_webdav_methods.asp
-       */ 
-      "SUBSCRIBE", "UNSUBSCRIBE", "NOTIFY", "POLL",
-      /*
-       * Yet another WebDAV extension, this time for
-       * Web Distributed Authoring and Versioning (RFC3253)
-       */
-      "VERSION-CONTROL", "REPORT", "CHECKOUT", "CHECKIN", "UNCHECKOUT",
-      "MKWORKSPACE", "UPDATE", "LABEL", "MERGE", "BASELINE-CONTROL", "MKACTIVITY",
-   };
-   int i;
-
-   for (i = 0; i < SZ(known_http_methods); i++)
-   {
-      if (0 == strcmpic(method, known_http_methods[i]))
-      {
-         return FALSE;
-      }
-   }
-
-   return TRUE;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  parse_http_request
- *
- * Description :  Parse out the host and port from the URL.  Find the
- *                hostname & path, port (if ':'), and/or password (if '@')
- *
- * Parameters  :
- *          1  :  req = HTTP request line to break down
- *          2  :  http = pointer to the http structure to hold elements
- *
- * Returns     :  JB_ERR_OK on success
- *                JB_ERR_MEMORY on out of memory
- *                JB_ERR_CGI_PARAMS on malformed command/URL
- *                                  or >100 domains deep.
- *
- *********************************************************************/
-jb_err parse_http_request(const char *req, struct http_request *http)
-{
-   char *buf;
-   char *v[10]; /* XXX: Why 10? We should only need three. */
-   int n;
-   jb_err err;
-
-   memset(http, '\0', sizeof(*http));
-
-   buf = strdup(req);
-   if (buf == NULL)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   n = ssplit(buf, " \r\n", v, SZ(v), 1, 1);
-   if (n != 3)
-   {
-      freez(buf);
-      return JB_ERR_PARSE;
-   }
-
-   /*
-    * Fail in case of unknown methods
-    * which we might not handle correctly.
-    *
-    * XXX: There should be a config option
-    * to forward requests with unknown methods
-    * anyway. Most of them don't need special
-    * steps.
-    */
-   if (unknown_method(v[0]))
-   {
-      log_error(LOG_LEVEL_ERROR, "Unknown HTTP method detected: %s", v[0]);
-      freez(buf);
-      return JB_ERR_PARSE;
-   }
-
-   if (strcmpic(v[2], "HTTP/1.1") && strcmpic(v[2], "HTTP/1.0"))
-   {
-      log_error(LOG_LEVEL_ERROR, "The only supported HTTP "
-         "versions are 1.0 and 1.1. This rules out: %s", v[2]);
-      freez(buf);
-      return JB_ERR_PARSE;
-   }
-
-   http->ssl = !strcmpic(v[0], "CONNECT");
-
-   err = parse_http_url(v[1], http, !http->ssl);
-   if (err)
-   {
-      freez(buf);
-      return err;
-   }
-
-   /*
-    * Copy the details into the structure
-    */
-   http->cmd = strdup(req);
-   http->gpc = strdup(v[0]);
-   http->ver = strdup(v[2]);
-
-   freez(buf);
-
-   if ( (http->cmd == NULL)
-     || (http->gpc == NULL)
-     || (http->ver == NULL) )
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  compile_pattern
- *
- * Description :  Compiles a host, domain or TAG pattern.
- *
- * Parameters  :
- *          1  :  pattern = The pattern to compile.
- *          2  :  anchoring = How the regex should be anchored.
- *                            Can be either one of NO_ANCHORING,
- *                            LEFT_ANCHORED or RIGHT_ANCHORED.
- *          3  :  url     = In case of failures, the spec member is
- *                          logged and the structure freed.
- *          4  :  regex   = Where the compiled regex should be stored.
- *
- * Returns     :  JB_ERR_OK - Success
- *                JB_ERR_MEMORY - Out of memory
- *                JB_ERR_PARSE - Cannot parse regex
- *
- *********************************************************************/
-static jb_err compile_pattern(const char *pattern, enum regex_anchoring anchoring,
-                              struct url_spec *url, regex_t **regex)
-{
-   int errcode;
-   char rebuf[BUFFER_SIZE];
-   const char *fmt = NULL;
-
-   assert(pattern);
-   assert(strlen(pattern) < sizeof(rebuf) - 2);
-
-   if (pattern[0] == '\0')
-   {
-      *regex = NULL;
-      return JB_ERR_OK;
-   }
-
-   switch (anchoring)
-   {
-      case NO_ANCHORING:
-         fmt = "%s";
-         break;
-      case RIGHT_ANCHORED:
-         fmt = "%s$";
-         break;
-      case LEFT_ANCHORED:
-         fmt = "^%s";
-         break;
-      default:
-         log_error(LOG_LEVEL_FATAL,
-            "Invalid anchoring in compile_pattern %d", anchoring);
-   }
-
-   *regex = zalloc(sizeof(**regex));
-   if (NULL == *regex)
-   {
-      free_url_spec(url);
-      return JB_ERR_MEMORY;
-   }
-
-   snprintf(rebuf, sizeof(rebuf), fmt, pattern);
-
-   errcode = regcomp(*regex, rebuf, (REG_EXTENDED|REG_NOSUB|REG_ICASE));
-
-   if (errcode)
-   {
-      size_t errlen = regerror(errcode, *regex, rebuf, sizeof(rebuf));
-      if (errlen > (sizeof(rebuf) - (size_t)1))
-      {
-         errlen = sizeof(rebuf) - (size_t)1;
-      }
-      rebuf[errlen] = '\0';
-      log_error(LOG_LEVEL_ERROR, "error compiling %s from %s: %s",
-         pattern, url->spec, rebuf);
-      free_url_spec(url);
-
-      return JB_ERR_PARSE;
-   }
-
-   return JB_ERR_OK;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  compile_url_pattern
- *
- * Description :  Compiles the three parts of an URL pattern.
- *
- * Parameters  :
- *          1  :  url = Target url_spec to be filled in.
- *          2  :  buf = The url pattern to compile. Will be messed up.
- *
- * Returns     :  JB_ERR_OK - Success
- *                JB_ERR_MEMORY - Out of memory
- *                JB_ERR_PARSE - Cannot parse regex
- *
- *********************************************************************/
-static jb_err compile_url_pattern(struct url_spec *url, char *buf)
-{
-   char *p;
-
-   p = strchr(buf, '/');
-   if (NULL != p)
-   {
-      /*
-       * Only compile the regex if it consists of more than
-       * a single slash, otherwise it wouldn't affect the result.
-       */
-      if (p[1] != '\0')
-      {
-         /*
-          * XXX: does it make sense to compile the slash at the beginning?
-          */
-         jb_err err = compile_pattern(p, LEFT_ANCHORED, url, &url->preg);
-
-         if (JB_ERR_OK != err)
-         {
-            return err;
-         }
-      }
-      *p = '\0';
-   }
-
-   p = strchr(buf, ':');
-   if (NULL != p)
-   {
-      *p++ = '\0';
-      url->port_list = strdup(p);
-      if (NULL == url->port_list)
-      {
-         return JB_ERR_MEMORY;
-      }
-   }
-   else
-   {
-      url->port_list = NULL;
-   }
-
-   if (buf[0] != '\0')
-   {
-      return compile_host_pattern(url, buf);
-   }
-
-   return JB_ERR_OK;
-
-}
-
-
-#ifdef FEATURE_EXTENDED_HOST_PATTERNS
-/*********************************************************************
- *
- * Function    :  compile_host_pattern
- *
- * Description :  Parses and compiles a host pattern..
- *
- * Parameters  :
- *          1  :  url = Target url_spec to be filled in.
- *          2  :  host_pattern = Host pattern to compile.
- *
- * Returns     :  JB_ERR_OK - Success
- *                JB_ERR_MEMORY - Out of memory
- *                JB_ERR_PARSE - Cannot parse regex
- *
- *********************************************************************/
-static jb_err compile_host_pattern(struct url_spec *url, const char *host_pattern)
-{
-   return compile_pattern(host_pattern, RIGHT_ANCHORED, url, &url->host_regex);
-}
-
-#else
-
-/*********************************************************************
- *
- * Function    :  compile_host_pattern
- *
- * Description :  Parses and "compiles" an old-school host pattern.
- *
- * Parameters  :
- *          1  :  url = Target url_spec to be filled in.
- *          2  :  host_pattern = Host pattern to parse.
- *
- * Returns     :  JB_ERR_OK - Success
- *                JB_ERR_MEMORY - Out of memory
- *                JB_ERR_PARSE - Cannot parse regex
- *
- *********************************************************************/
-static jb_err compile_host_pattern(struct url_spec *url, const char *host_pattern)
-{
-   char *v[150];
-   size_t size;
-   char *p;
-
-   /*
-    * Parse domain part
-    */
-   if (host_pattern[strlen(host_pattern) - 1] == '.')
-   {
-      url->unanchored |= ANCHOR_RIGHT;
-   }
-   if (host_pattern[0] == '.')
-   {
-      url->unanchored |= ANCHOR_LEFT;
-   }
-
-   /* 
-    * Split domain into components
-    */
-   url->dbuffer = strdup(host_pattern);
-   if (NULL == url->dbuffer)
-   {
-      free_url_spec(url);
-      return JB_ERR_MEMORY;
-   }
-
-   /* 
-    * Map to lower case
-    */
-   for (p = url->dbuffer; *p ; p++)
-   {
-      *p = (char)tolower((int)(unsigned char)*p);
-   }
-
-   /* 
-    * Split the domain name into components
-    */
-   url->dcount = ssplit(url->dbuffer, ".", v, SZ(v), 1, 1);
-
-   if (url->dcount < 0)
-   {
-      free_url_spec(url);
-      return JB_ERR_MEMORY;
-   }
-   else if (url->dcount != 0)
-   {
-      /* 
-       * Save a copy of the pointers in dvec
-       */
-      size = (size_t)url->dcount * sizeof(*url->dvec);
-      
-      url->dvec = (char **)malloc(size);
-      if (NULL == url->dvec)
-      {
-         free_url_spec(url);
-         return JB_ERR_MEMORY;
-      }
-
-      memcpy(url->dvec, v, size);
-   }
-   /*
-    * else dcount == 0 in which case we needn't do anything,
-    * since dvec will never be accessed and the pattern will
-    * match all domains.
-    */
-   return JB_ERR_OK;
-}
-
-
-/*********************************************************************
- *
- * Function    :  simplematch
- *
- * Description :  String matching, with a (greedy) '*' wildcard that
- *                stands for zero or more arbitrary characters and
- *                character classes in [], which take both enumerations
- *                and ranges.
- *
- * Parameters  :
- *          1  :  pattern = pattern for matching
- *          2  :  text    = text to be matched
- *
- * Returns     :  0 if match, else nonzero
- *
- *********************************************************************/
-static int simplematch(const char *pattern, const char *text)
-{
-   const unsigned char *pat = (const unsigned char *)pattern;
-   const unsigned char *txt = (const unsigned char *)text;
-   const unsigned char *fallback = pat; 
-   int wildcard = 0;
-  
-   unsigned char lastchar = 'a';
-   unsigned i;
-   unsigned char charmap[32];
-  
-   while (*txt)
-   {
-
-      /* EOF pattern but !EOF text? */
-      if (*pat == '\0')
-      {
-         if (wildcard)
-         {
-            pat = fallback;
-         }
-         else
-         {
-            return 1;
-         }
-      }
-
-      /* '*' in the pattern?  */
-      if (*pat == '*') 
-      {
-     
-         /* The pattern ends afterwards? Speed up the return. */
-         if (*++pat == '\0')
-         {
-            return 0;
-         }
-     
-         /* Else, set wildcard mode and remember position after '*' */
-         wildcard = 1;
-         fallback = pat;
-      }
-
-      /* Character range specification? */
-      if (*pat == '[')
-      {
-         memset(charmap, '\0', sizeof(charmap));
-
-         while (*++pat != ']')
-         {
-            if (!*pat)
-            { 
-               return 1;
-            }
-            else if (*pat == '-')
-            {
-               if ((*++pat == ']') || *pat == '\0')
-               {
-                  return(1);
-               }
-               for (i = lastchar; i <= *pat; i++)
-               {
-                  charmap[i / 8] |= (unsigned char)(1 << (i % 8));
-               } 
-            }
-            else
-            {
-               charmap[*pat / 8] |= (unsigned char)(1 << (*pat % 8));
-               lastchar = *pat;
-            }
-         }
-      } /* -END- if Character range specification */
-
-
-      /* 
-       * Char match, or char range match? 
-       */
-      if ( (*pat == *txt)
-      ||   (*pat == '?')
-      ||   ((*pat == ']') && (charmap[*txt / 8] & (1 << (*txt % 8)))) )
-      {
-         /* 
-          * Sucess: Go ahead
-          */
-         pat++;
-      }
-      else if (!wildcard)
-      {
-         /* 
-          * No match && no wildcard: No luck
-          */
-         return 1;
-      }
-      else if (pat != fallback)
-      {
-         /*
-          * Increment text pointer if in char range matching
-          */
-         if (*pat == ']')
-         {
-            txt++;
-         }
-         /*
-          * Wildcard mode && nonmatch beyond fallback: Rewind pattern
-          */
-         pat = fallback;
-         /*
-          * Restart matching from current text pointer
-          */
-         continue;
-      }
-      txt++;
-   }
-
-   /* Cut off extra '*'s */
-   if(*pat == '*')  pat++;
-
-   /* If this is the pattern's end, fine! */
-   return(*pat);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  simple_domaincmp
- *
- * Description :  Domain-wise Compare fqdn's.  The comparison is
- *                both left- and right-anchored.  The individual
- *                domain names are compared with simplematch().
- *                This is only used by domain_match.
- *
- * Parameters  :
- *          1  :  pv = array of patterns to compare
- *          2  :  fv = array of domain components to compare
- *          3  :  len = length of the arrays (both arrays are the
- *                      same length - if they weren't, it couldn't
- *                      possibly be a match).
- *
- * Returns     :  0 => domains are equivalent, else no match.
- *
- *********************************************************************/
-static int simple_domaincmp(char **pv, char **fv, int len)
-{
-   int n;
-
-   for (n = 0; n < len; n++)
-   {
-      if (simplematch(pv[n], fv[n]))
-      {
-         return 1;
-      }
-   }
-
-   return 0;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  domain_match
- *
- * Description :  Domain-wise Compare fqdn's. Governed by the bimap in
- *                pattern->unachored, the comparison is un-, left-,
- *                right-anchored, or both.
- *                The individual domain names are compared with
- *                simplematch().
- *
- * Parameters  :
- *          1  :  pattern = a domain that may contain a '*' as a wildcard.
- *          2  :  fqdn = domain name against which the patterns are compared.
- *
- * Returns     :  0 => domains are equivalent, else no match.
- *
- *********************************************************************/
-static int domain_match(const struct url_spec *pattern, const struct http_request *fqdn)
-{
-   char **pv, **fv;  /* vectors  */
-   int    plen, flen;
-   int unanchored = pattern->unanchored & (ANCHOR_RIGHT | ANCHOR_LEFT);
-
-   plen = pattern->dcount;
-   flen = fqdn->dcount;
-
-   if (flen < plen)
-   {
-      /* fqdn is too short to match this pattern */
-      return 1;
-   }
-
-   pv   = pattern->dvec;
-   fv   = fqdn->dvec;
-
-   if (unanchored == ANCHOR_LEFT)
-   {
-      /*
-       * Right anchored.
-       *
-       * Convert this into a fully anchored pattern with
-       * the fqdn and pattern the same length
-       */
-      fv += (flen - plen); /* flen - plen >= 0 due to check above */
-      return simple_domaincmp(pv, fv, plen);
-   }
-   else if (unanchored == 0)
-   {
-      /* Fully anchored, check length */
-      if (flen != plen)
-      {
-         return 1;
-      }
-      return simple_domaincmp(pv, fv, plen);
-   }
-   else if (unanchored == ANCHOR_RIGHT)
-   {
-      /* Left anchored, ignore all extra in fqdn */
-      return simple_domaincmp(pv, fv, plen);
-   }
-   else
-   {
-      /* Unanchored */
-      int n;
-      int maxn = flen - plen;
-      for (n = 0; n <= maxn; n++)
-      {
-         if (!simple_domaincmp(pv, fv, plen))
-         {
-            return 0;
-         }
-         /*
-          * Doesn't match from start of fqdn
-          * Try skipping first part of fqdn
-          */
-         fv++;
-      }
-      return 1;
-   }
-
-}
-#endif /* def FEATURE_EXTENDED_HOST_PATTERNS */
-
-
-/*********************************************************************
- *
- * Function    :  create_url_spec
- *
- * Description :  Creates a "url_spec" structure from a string.
- *                When finished, free with free_url_spec().
- *
- * Parameters  :
- *          1  :  url = Target url_spec to be filled in.  Will be
- *                      zeroed before use.
- *          2  :  buf = Source pattern, null terminated.  NOTE: The
- *                      contents of this buffer are destroyed by this
- *                      function.  If this function succeeds, the
- *                      buffer is copied to url->spec.  If this
- *                      function fails, the contents of the buffer
- *                      are lost forever.
- *
- * Returns     :  JB_ERR_OK - Success
- *                JB_ERR_MEMORY - Out of memory
- *                JB_ERR_PARSE - Cannot parse regex (Detailed message
- *                               written to system log)
- *
- *********************************************************************/
-jb_err create_url_spec(struct url_spec *url, char *buf)
-{
-   assert(url);
-   assert(buf);
-
-   memset(url, '\0', sizeof(*url));
-
-   /* Remember the original specification for the CGI pages. */
-   url->spec = strdup(buf);
-   if (NULL == url->spec)
-   {
-      return JB_ERR_MEMORY;
-   }
-
-   /* Is it tag pattern? */
-   if (0 == strncmpic("TAG:", url->spec, 4))
-   {
-      /* The pattern starts with the first character after "TAG:" */
-      const char *tag_pattern = buf + 4;
-      return compile_pattern(tag_pattern, NO_ANCHORING, url, &url->tag_regex);
-   }
-
-   /* If it isn't a tag pattern it must be a URL pattern. */
-   return compile_url_pattern(url, buf);
-}
-
-
-/*********************************************************************
- *
- * Function    :  free_url_spec
- *
- * Description :  Called from the "unloaders".  Freez the url
- *                structure elements.
- *
- * Parameters  :
- *          1  :  url = pointer to a url_spec structure.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void free_url_spec(struct url_spec *url)
-{
-   if (url == NULL) return;
-
-   freez(url->spec);
-#ifdef FEATURE_EXTENDED_HOST_PATTERNS
-   if (url->host_regex)
-   {
-      regfree(url->host_regex);
-      freez(url->host_regex);
-   }
-#else
-   freez(url->dbuffer);
-   freez(url->dvec);
-   url->dcount = 0;
-#endif /* ndef FEATURE_EXTENDED_HOST_PATTERNS */
-   freez(url->port_list);
-   if (url->preg)
-   {
-      regfree(url->preg);
-      freez(url->preg);
-   }
-   if (url->tag_regex)
-   {
-      regfree(url->tag_regex);
-      freez(url->tag_regex);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  url_match
- *
- * Description :  Compare a URL against a URL pattern.
- *
- * Parameters  :
- *          1  :  pattern = a URL pattern
- *          2  :  url = URL to match
- *
- * Returns     :  Nonzero if the URL matches the pattern, else 0.
- *
- *********************************************************************/
-int url_match(const struct url_spec *pattern,
-              const struct http_request *http)
-{
-   /* XXX: these should probably be functions. */
-#define PORT_MATCHES ((NULL == pattern->port_list) || match_portlist(pattern->port_list, http->port))
-#ifdef FEATURE_EXTENDED_HOST_PATTERNS
-#define DOMAIN_MATCHES ((NULL == pattern->host_regex) || (0 == regexec(pattern->host_regex, http->host, 0, NULL, 0)))
-#else
-#define DOMAIN_MATCHES ((NULL == pattern->dbuffer) || (0 == domain_match(pattern, http)))
-#endif
-#define PATH_MATCHES ((NULL == pattern->preg) || (0 == regexec(pattern->preg, http->path, 0, NULL, 0)))
-
-   if (pattern->tag_regex != NULL)
-   {
-      /* It's a tag pattern and shouldn't be matched against URLs */
-      return 0;
-   } 
-
-   return (PORT_MATCHES && DOMAIN_MATCHES && PATH_MATCHES);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  match_portlist
- *
- * Description :  Check if a given number is covered by a comma
- *                separated list of numbers and ranges (a,b-c,d,..)
- *
- * Parameters  :
- *          1  :  portlist = String with list
- *          2  :  port = port to check
- *
- * Returns     :  0 => no match
- *                1 => match
- *
- *********************************************************************/
-int match_portlist(const char *portlist, int port)
-{
-   char *min, *max, *next, *portlist_copy;
-
-   min = next = portlist_copy = strdup(portlist);
-
-   /*
-    * Zero-terminate first item and remember offset for next
-    */
-   if (NULL != (next = strchr(portlist_copy, (int) ',')))
-   {
-      *next++ = '\0';
-   }
-
-   /*
-    * Loop through all items, checking for match
-    */
-   while(min)
-   {
-      if (NULL == (max = strchr(min, (int) '-')))
-      {
-         /*
-          * No dash, check for equality
-          */
-         if (port == atoi(min))
-         {
-            freez(portlist_copy);
-            return(1);
-         }
-      }
-      else
-      {
-         /*
-          * This is a range, so check if between min and max,
-          * or, if max was omitted, between min and 65K
-          */
-         *max++ = '\0';
-         if(port >= atoi(min) && port <= (atoi(max) ? atoi(max) : 65535))
-         {
-            freez(portlist_copy);
-            return(1);
-         }
-
-      }
-
-      /*
-       * Jump to next item
-       */
-      min = next;
-
-      /*
-       * Zero-terminate next item and remember offset for n+1
-       */
-      if ((NULL != next) && (NULL != (next = strchr(next, (int) ','))))
-      {
-         *next++ = '\0';
-      }
-   }
-
-   freez(portlist_copy);
-   return 0;
-
-}
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/urlmatch.h b/external/privoxy/urlmatch.h
deleted file mode 100644
index db5c60b..0000000
--- a/external/privoxy/urlmatch.h
+++ /dev/null
@@ -1,136 +0,0 @@
-#ifndef URLMATCH_H_INCLUDED
-#define URLMATCH_H_INCLUDED
-#define URLMATCH_H_VERSION "$Id: urlmatch.h,v 1.13 2009/03/02 19:18:11 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/urlmatch.h,v $
- *
- * Purpose     :  Declares functions to match URLs against URL
- *                patterns.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002, 2006 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: urlmatch.h,v $
- *    Revision 1.13  2009/03/02 19:18:11  fabiankeil
- *    Streamline parse_http_request()'s prototype. As
- *    cparser pointed out it doesn't actually use csp.
- *
- *    Revision 1.12  2008/05/04 16:18:32  fabiankeil
- *    Provide parse_http_url() with a third parameter to specify
- *    whether or not URLs without protocol are acceptable.
- *
- *    Revision 1.11  2008/05/04 13:30:55  fabiankeil
- *    Streamline parse_http_url()'s prototype.
- *
- *    Revision 1.10  2008/04/14 18:11:21  fabiankeil
- *    The compiler might not notice it, but the buffer passed to
- *    create_url_spec() is modified later on and thus shouldn't
- *    be declared immutable.
- *
- *    Revision 1.9  2008/04/08 16:07:39  fabiankeil
- *    Make it harder to mistake url_match()'s
- *    second parameter for an url_spec.
- *
- *    Revision 1.8  2007/09/02 15:31:20  fabiankeil
- *    Move match_portlist() from filter.c to urlmatch.c.
- *    It's used for url matching, not for filtering.
- *
- *    Revision 1.7  2007/01/06 14:24:38  fabiankeil
- *    Mark *csp as immutable for parse_http_url()
- *    and url_match().
- *
- *    Revision 1.6  2006/12/06 19:12:43  fabiankeil
- *    Added prototype for init_domain_components().
- *
- *    Revision 1.5  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.3  2002/03/26 22:29:55  swa
- *    we have a new homepage!
- *
- *    Revision 1.2  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.1  2002/01/17 20:53:46  jongfoster
- *    Moving all our URL and URL pattern parsing code to the same file - it
- *    was scattered around in filters.c, loaders.c and parsers.c.
- *
- *    Providing a single, simple url_match(pattern,url) function - rather than
- *    the 3-line match routine which was repeated all over the place.
- *
- *    Renaming free_url to free_url_spec, since it frees a struct url_spec.
- *
- *    Providing parse_http_url() so that URLs can be parsed without faking a
- *    HTTP request line for parse_http_request() or repeating the parsing
- *    code (both of which were techniques that were actually in use).
- *
- *    Standardizing that struct http_request is used to represent a URL, and
- *    struct url_spec is used to represent a URL pattern.  (Before, URLs were
- *    represented as seperate variables and a partially-filled-in url_spec).
- *
- *
- *********************************************************************/
-
-
-#include "project.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern void free_http_request(struct http_request *http);
-extern jb_err init_domain_components(struct http_request *http);
-extern jb_err parse_http_request(const char *req, struct http_request *http);
-extern jb_err parse_http_url(const char *url,
-                             struct http_request *http,
-                             int require_protocol);
-#define REQUIRE_PROTOCOL 1
-
-extern int url_match(const struct url_spec *pattern,
-                     const struct http_request *http);
-
-extern jb_err create_url_spec(struct url_spec *url, char *buf);
-extern void free_url_spec(struct url_spec *url);
-extern int match_portlist(const char *portlist, int port);
-
-
-/* Revision control strings from this header and associated .c file */
-extern const char urlmatch_rcs[];
-extern const char urlmatch_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef URLMATCH_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/user.action b/external/privoxy/user.action
deleted file mode 100644
index 7b18dd9..0000000
--- a/external/privoxy/user.action
+++ /dev/null
@@ -1,169 +0,0 @@
-######################################################################
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/user.action,v $
-# 
-#  $Id: user.action,v 1.9 2008/03/27 18:27:37 fabiankeil Exp $
-#
-#  Purpose     :  User-maintained actions file, see
-#                 http://www.privoxy.org/user-manual/actions-file.html
-#
-######################################################################
-
-# This is the place to add your personal exceptions and additions to
-# the general policies as defined in default.action. (Here they will be
-# safe from updates to default.action.) Later defined actions always
-# take precedence, so anything defined here should have the last word.
-
-# See http://www.privoxy.org/user-manual/actions-file.html, or the 
-# comments in default.action, for an explanation of what an "action" is
-# and what each action does.
-
-# The examples included here either use bogus sites, or have the actual
-# rules commented out (with the '#' character). Useful aliases are
-# included in the top section as a convenience.
-
-#############################################################################
-# Aliases
-#############################################################################
-{{alias}}
-#############################################################################
-#
-# You can define a short form for a list of permissions - e.g., instead
-# of "-crunch-incoming-cookies -crunch-outgoing-cookies -filter -fast-redirects",
-# you can just write "shop". This is called an alias.
-#
-# Currently, an alias can contain any character except space, tab, '=', '{'
-# or '}'.
-# But please use only 'a'-'z', '0'-'9', '+', and '-'.
-#
-# Alias names are not case sensitive.
-#
-# Aliases beginning with '+' or '-' may be used for system action names 
-# in future releases - so try to avoid alias names like this.  (e.g. 
-# "+crunch-all-cookies" below is not a good name)
-#
-# Aliases must be defined before they are used.
-# 
-# These aliases just save typing later:
-#
-+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
--crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
- allow-all-cookies  = -crunch-all-cookies -session-cookies-only -filter{content-cookies}
- allow-popups       = -filter{all-popups} -filter{unsolicited-popups}
-+block-as-image     = +block{Blocked image request.} +handle-as-image
--block-as-image     = -block
-
-# These aliases define combinations of actions
-# that are useful for certain types of sites:
-#
-fragile     = -block -crunch-all-cookies -filter -fast-redirects -hide-referer -prevent-compression
-shop        = -crunch-all-cookies allow-popups
-
-# Your favourite blend of filters:
-#
-myfilters   = +filter{html-annoyances} +filter{js-annoyances} +filter{all-popups}\
-              +filter{webbugs} +filter{banners-by-size}
-
-# Allow ads for selected useful free sites:
-#
-allow-ads   = -block -filter{banners-by-size} -filter{banners-by-link}
-#... etc.  Customize to your heart's content.
-
-## end aliases ########################################################
-#######################################################################
-
-# Begin examples: #####################################################
-
-# Say you have accounts on some sites that you visit regularly, and you
-# don't want to have to log in manually each time. So you'd like to allow
-# persistent cookies for these sites. The allow-all-cookies alias defined
-# above does exactly that, i.e. it disables crunching of cookies in any
-# direction, and the processing of cookies to make them only temporary.
-#
-{ allow-all-cookies }
-#.sourceforge.net
-#sunsolve.sun.com
-#slashdot.org
-#.yahoo.com
-#.msdn.microsoft.com
-#.redhat.com
-
-# Say the site where you do your homebanking needs to open popup
-# windows, but you have chosen to kill popups uncoditionally by default.
-# This will allow it for your-example-bank.com:
-#
-{ -filter{all-popups} }
-.banking.example.com
-
-# Some hosts and some file types you may not want to filter for
-# various reasons:
-#
-{ -filter }
-
-# Technical documentation is likely to contain strings that might
-# erroneously get altered by the JavaScript-oriented filters:
-#
-#.tldp.org
-#/(.*/)?selfhtml/
-
-# And this stupid host sends streaming video with a wrong MIME type,
-# so that Privoxy thinks it is getting HTML and starts filtering:
-#
-stupid-server.example.com/
-
-
-# Example of a simple "block" action. Say you've seen an ad on your
-# favourite page on example.com that you want to get rid of. You have
-# right-clicked the image, selected "copy image location" and pasted
-# the URL below while removing the leading http://, into a { +block{reason} }
-# section. Note that { +handle-as-image } need not be specified, since
-# all URLs ending in .gif will be tagged as images by the general rules
-# as set in default.action anyway:
-#
-{ +block{Nasty ads.} }
-www.example.com/nasty-ads/sponsor.gif
-
-# The URLs of dynamically generated banners, especially from large banner
-# farms, often don't use the well-known image file name extensions, which
-# makes it impossible for Privoxy to guess the file type just by looking
-# at the URL. 
-# You can use the +block-as-image alias defined above for these cases.
-# Note that objects which match this rule but then turn out NOT to be an
-# image are typically rendered as a "broken image" icon by the browser.
-# Use cautiously.
-#
-{ +block-as-image }
-#.doubleclick.net
-#/Realmedia/ads/
-#ar.atwola.com/
-
-# Now you noticed that the default configuration breaks Forbes
-# Magazine, but you were too lazy to find out which action is the
-# culprit, and you were again too lazy to give feedback, so you just
-# used the fragile alias on the site, and -- whoa! -- it worked. The
-# 'fragile' aliases disables those actions that are most likely to break
-# a site. Also, good for testing purposes to see if it is Privoxy that
-# is causing the problem or not.
-# 
-{ fragile }
-#.forbes.com
-
-# Here are some sites we wish to support, and we will allow their ads
-# through.
-#
-{ allow-ads }
-#.sourceforge.net
-#.slashdot.org
-#.osdn.net
-
-# user.action is generally the best place to define exceptions and
-# additions to the default policies of default.action. Some actions are
-# safe to have their default policies set here though. So let's set a
-# default policy to have a 'blank' image as opposed to the checkerboard
-# pattern for ALL sites. '/' of course matches all URLs.
-# patterns:
-#
-{ +set-image-blocker{blank} }
-#/
-
-## set vi:nowrap tw=72
diff --git a/external/privoxy/user.filter b/external/privoxy/user.filter
deleted file mode 100644
index 98de1c6..0000000
--- a/external/privoxy/user.filter
+++ /dev/null
@@ -1,75 +0,0 @@
-# ********************************************************************
-# 
-#  File        :  $Source: /cvsroot/ijbswa/current/user.filter,v $
-# 
-#  $Id: user.filter,v 1.3 2008/05/21 20:17:03 fabiankeil Exp $
-#
-#  Purpose     :  Rules to process the content of web pages
-# 
-#  Copyright   :  Written by and Copyright (C) 2006-2008 the
-#                 Privoxy team. http://www.privoxy.org/
-#
-# We value your feedback. However, to provide you with the best support,
-# please note:
-#  
-#  * Use the support forum to get help:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=211118
-#  * Submit bugs only thru our bug forum:
-#    http://sourceforge.net/tracker/?group_id=11118&atid=111118 
-#    Make sure that the bug has not already been submitted. Please try
-#    to verify that it is a Privoxy bug, and not a browser or site
-#    bug first. If you are using your own custom configuration, please
-#    try the stock configs to see if the problem is a configuration
-#    related bug. And if not using the latest development snapshot,
-#    please try the latest one. Or even better, CVS sources.
-#  * Submit feature requests only thru our feature request forum:
-#    http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse
-#      
-# For any other issues, feel free to use the mailing lists:
-# http://sourceforge.net/mail/?group_id=11118
-#    
-# Anyone interested in actively participating in development and related
-# discussions can join the appropriate mailing list here:
-# http://sourceforge.net/mail/?group_id=11118. Archives are available
-# here too.
-# 
-#################################################################################
-#
-# Syntax:
-#
-# Generally filters start with a line like "FILTER: name description".
-# They are then referrable from the actionsfile with +filter{name}
-#
-# FILTER marks a filter as content filter, other filter
-# types are CLIENT-HEADER-FILTER, CLIENT-HEADER-TAGGER,
-# SERVER-HEADER-FILTER and SERVER-HEADER-TAGGER.
-#
-# Inside the filters, write one Perl-Style substitution (job) per line.
-# Jobs that precede the first FILTER: line are ignored.
-#
-# For Details see the pcrs manpage contained in this distribution.
-# (and the perlre, perlop and pcre manpages)
-#
-# Note that you are free to choose the delimiter as you see fit.
-#
-# Note2: In addition to the Perl options gimsx, the following nonstandard
-# options are supported:
-# 
-# 'U' turns the default to ungreedy matching.  Add ? to quantifiers to
-#     switch back to greedy.
-#
-# 'T' (trivial) prevents parsing for backreferences in the substitute.
-#     Use if you want to include text like '$&' in your substitute without
-#     quoting.
-#
-# 'D' (Dynamic) allows the use of variables. Supported variables are:
-#     $host, $origin (the IP address the request came from), $path and $url.
-#
-#     Note that '$' is a bad choice as delimiter for dynamic filters as you
-#     might end up with unintended variables if you use a variable name
-#     directly after the delimiter. Variables will be resolved without
-#     escaping anything, therefore you also have to be careful not to chose
-#     delimiters that appear in the replacement text. For example '<' should
-#     be save, while '?' will sooner or later cause conflicts with $url.
-# 
-#################################################################################
diff --git a/external/privoxy/utils/changelog2doc.pl b/external/privoxy/utils/changelog2doc.pl
deleted file mode 100755
index a12cb32..0000000
--- a/external/privoxy/utils/changelog2doc.pl
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/usr/bin/perl
-
-# $Id: changelog2doc.pl,v 1.2 2008/09/26 16:49:09 fabiankeil Exp $
-# $Source: /cvsroot/ijbswa/current/utils/changelog2doc.pl,v $
-
-# Filter to parse the ChangeLog and translate the changes for
-# the most recent version into something that looks like markup
-# for the documentation but still needs fine-tuning.
-
-use strict;
-use warnings;
-
-my @entries;
-
-sub read_entries() {
-    my $section_reached = 0;
-    my $i = -1;
-
-    while (<>) {
-        if (/^\*{3} /) {
-            last if $section_reached;
-            $section_reached = 1;
-            next;
-        }
-        next unless $section_reached;
-        next if /^\s*$/;
-
-        if (/^-/) {
-            $i++; 
-            $entries[$i] = '';
-        }
-        s@^-?\s*@@;
-
-        $entries[$i] .= $_;
-    }
-    print "Parsed " . @entries . " entries.\n";
-}
-
-sub generate_markup() {
-    my $markup = '';
-
-    $markup .= "<para>\n" .
-               " <itemizedlist>\n";
-
-    foreach my $entry (@entries) {
-        chomp $entry;
-        $entry =~ s@\n@\n    @g;
-        $markup .= "  <listitem>\n" .
-                   "   <para>\n" .
-                   "    " . $entry . "\n" .
-                   "   </para>\n" .
-                   "  </listitem>\n"
-                   ;
-    }
-    $markup .= " </itemizedlist>\n" .
-               "</para>\n";
-
-    print $markup;
-}
-
-sub main () {
-    read_entries();
-    generate_markup();
-}
-
-main();
diff --git a/external/privoxy/utils/docbook2man/COPYING b/external/privoxy/utils/docbook2man/COPYING
deleted file mode 100644
index d60c31a..0000000
--- a/external/privoxy/utils/docbook2man/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year  name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/external/privoxy/utils/docbook2man/docbook2man-spec.pl b/external/privoxy/utils/docbook2man/docbook2man-spec.pl
deleted file mode 100644
index 4e6d484..0000000
--- a/external/privoxy/utils/docbook2man/docbook2man-spec.pl
+++ /dev/null
@@ -1,1229 +0,0 @@
-=head1 NAME
-
-docbook2man-spec - convert DocBook RefEntries to Unix manpages
-
-=head1 SYNOPSIS
-
-The SGMLSpm package from CPAN.  This contains the sgmlspl script which
-is used to grok this file.  Use it like this:
-
-nsgmls some-docbook-document.sgml | sgmlspl docbook2man-spec.pl
-
-=head1 DESCRIPTION
-
-This is a sgmlspl spec file that produces Unix-style
-manpages from RefEntry markup.
-
-See the accompanying RefEntry man page for 'plain new' documentation. :)
-
-=head1 LIMITATIONS
-
-Trying docbook2man on non-DocBook or non-conformant SGML results in
-undefined behavior. :-)
-
-This program is a slow, dodgy Perl script.
-
-This program does not come close to supporting all the possible markup
-in DocBook, and will produce wrong output in some cases with supported
-markup.
-
-=head1 TODO
-
-Add new element handling and fix existing handling.  Be robust.
-Produce cleanest, readable man output as possible (unlike some
-other converters).  Follow Linux man(7) convention.
-If this results in added logic in this script,
-that's okay.  The code should still be reasonably organized.
-
-Make it faster.  If Perl sucks port it to another language.
-
-=head1 COPYRIGHT
-
-Copyright (C) 1998-1999 Steve Cheng <steve@xxxxxxxxxxxxxxx>
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
-version.
-
-You should have received a copy of the GNU General Public License along with
-this program; see the file COPYING.  If not, please write to the Free
-Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-=cut
-
-# $Id: docbook2man-spec.pl,v 1.4 2006/07/18 14:49:14 david__schmidt Exp $
-
-use SGMLS;			# Use the SGMLS package.
-use SGMLS::Output;		# Use stack-based output.
-use SGMLS::Refs;
-
-########################################################################
-# SGMLSPL script produced automatically by the script sgmlspl.pl
-#
-# Document Type: any, but processes only RefEntries
-# Edited by: me :)
-########################################################################
-
-$write_manpages = 0;
-$blank_xrefs = 0;
-
-sgml('start', sub { 
-	push_output('nul');
-	$raw_cdata = 1;			# Makes it a bit faster.
-	
-	# Links file
-	open(LINKSFILE, ">manpage.links");
-
-	$Refs = new SGMLS::Refs("manpage.refs");
-});
-sgml('end', sub {
-	close(LINKSFILE);
-	if($blank_xrefs) {
-		print STDERR "Warning: output contains unresolved XRefs\n";
-	}
-});
-
-
-
-
-########################################################################
-#
-# Output helpers 
-#
-########################################################################
-
-# Our own version of sgml() and output() to allow simple string output
-# to play well with roff's stupid whitespace rules. 
-
-sub man_sgml
-{
-	if(ref($_[1]) eq 'CODE') {
-		return &sgml;
-	}
-	
-	my $s = $_[1];
-
-	$s =~ s/\\/\\\\/g;
-	$s =~ s/'/\\'/g;
-
-	# \n at the beginning means start at beginning of line
-	if($s =~ s/^\n//) {
-		$sub = 'sub { output "\n" unless $newline_last++; ';
-		if($s eq '') { 
-			sgml($_[0], eval('sub { output "\n" unless $newline_last++; }'));
-		} elsif($s =~ /\n$/) {
-			sgml($_[0], eval("sub { output \"\\n\" unless \$newline_last++; output '$s'; }"));
-		} else {
-			sgml($_[0], eval("sub { output \"\\n\" unless \$newline_last; output '$s'; \$newline_last = 0; }"));
-		}
-	} else {
-		if($s =~ /\n$/) {
-			sgml($_[0], eval("sub { output '$s'; \$newline_last = 1; }"));
-		} else {
-			sgml($_[0], eval("sub { output '$s'; \$newline_last = 0; }"));
-		}
-	}
-}
-
-sub man_output
-{
-	$_ = shift;
-	if(s/^\n//) {
-		output "\n" unless $newline_last++;
-	}
-	return if $_ eq '';
-	
-	output $_;
-
-	if(@_) {
-		output @_;
-		$newline_last = (pop(@_) =~ /\n$/);
-	} else {
-		$newline_last = ($_ =~ /\n$/)
-	}
-}
-
-# Fold lines into one, quote some characters
-sub fold_string
-{
-	$_ = shift;
-	
-	s/\\/\\\\/g;
-	s/"/\\\&"/g;
-
-	# Change tabs to spaces
-	tr/\t\n/  /;
-
-	# Trim whitespace from beginning and end.
-	s/^ +//;
-	s/ +$//;
-
-	return $_;
-}
-	
-sub save_cdata()
-{
-	$raw_cdata++;
-	push_output('string');
-}
-
-sub bold_on()
-{
-	# If the last font is also bold, don't change anything.
-	# Basically this is to just get more readable man output.
-	if($fontstack[$#fontstack] ne 'bold') {
-		if(!$raw_cdata) {
-			output '\fB';
-			$newline_last = 0;
-		}
-	}
-	push(@fontstack, 'bold');
-}
-
-sub italic_on()
-{
-	# If the last font is also italic, don't change anything.
-	if($fontstack[$#fontstack] ne 'italic') {
-		if(!$raw_cdata) {
-			output '\fI';
-			$newline_last = 0;
-		}
-	}
-	push(@fontstack, 'italic');
-}
-
-sub font_off()
-{
-	my $thisfont = pop(@fontstack);
-	my $lastfont = $fontstack[$#fontstack];
-	
-	# Only output font change if it is different
-	if($thisfont ne $lastfont) {
-		if($raw_cdata)			{ return; }
-		elsif($lastfont eq 'bold') 	{ output '\fB'; }
-		elsif($lastfont eq 'italic')	{ output '\fI'; }
-		else				{ output '\fR'; }
-	
-		$newline_last = 0;
-	}
-}
-
-
-
-
-
-
-########################################################################
-#
-# Manpage management
-#
-########################################################################
-
-sgml('<REFENTRY>', sub { 
-	# This will be overwritten at end of REFMETA, when we know the name of the page.
-	pop_output();
-	
-	$write_manpages = 1;		# Currently writing manpage.
-	
-	$nocollapse_whitespace = 0;	# Current whitespace collapse counter.
-	$newline_last = 1;		# At beginning of line?
-		# Just a bit of warning, you will see this variable manipulated
-		# manually a lot.  It makes the code harder to follow but it
-		# saves you from having to worry about collapsing at the end of
-		# parse, stopping at verbatims, etc.
-	$raw_cdata = 0;                 # Instructs certain output functions to
-					# leave CDATA alone, so we can assign
-					# it to a string and process it, etc.
-	@fontstack = ();		# Fonts being activated.
-	
-	$manpage_title = '';		# Needed for indexing.
-	$manpage_sect = '';
-	@manpage_names = ();
-	
-	$manpage_misc = '';
-	
-	$list_nestlevel = 0;		# Indent certain nested content.
-});
-sgml('</REFENTRY>', sub {
-	if(!$newline_last) {
-		output "\n";
-	}
-	
-	$write_manpages = 0;
-	$raw_cdata = 1;
-	push_output('nul');
-});
-
-sgml('</REFMETA>', sub {
-	push_output('file', "$manpage_title.$manpage_sect");
-
-	output <<_END_BANNER;
-.\\" This manpage has been automatically generated by docbook2man 
-.\\" from a DocBook document.  This tool can be found at:
-.\\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
-.\\" Please send any bug reports, improvements, comments, patches, 
-.\\" etc. to Steve Cheng <steve\@ggi-project.org>.
-_END_BANNER
-
-	my $manpage_date = `date "+%d %B %Y"`;
-		
-	output '.TH "';
-	
-	# If the title is not mixed-case, convention says to
-	# uppercase the whole title.  (The canonical title is
-	# lowercase.)
-	if($manpage_title =~ /[A-Z]/) {
-		output fold_string($manpage_title);
-	} else {
-		output uc(fold_string($manpage_title));
-	}
-	
-	output  '" "', fold_string($manpage_sect), 
-		'" "', fold_string(`date "+%d %B %Y"`), 
-		'" "', $manpage_misc, 
-		'" "', $manpage_manual, 
-		"\"\n";
-
-	$newline_last = 1;
-
-	# References to this RefEntry.
-	my $id = $_[0]->parent->attribute('ID')->value;
-	if($id ne '') {
-		# The 'package name' part of the section should
-		# not be used when citing it.
-		my ($sectnum) = ($manpage_sect =~ /([0-9]*)/);
-		
-		if($_[0]->parent->attribute('XREFLABEL')->value eq '') {
-			$Refs->put("refentry:$id", "$manpage_title($sectnum)");
-		} else {
-			$Refs->put("refentry:$id",
-				$_[0]->parent->attribute('XREFLABEL')->value . 
-				"($sectnum)");
-		}
-	}
-});
-
-sgml('<REFENTRYTITLE>', sub { 
-	if($_[0]->in('REFMETA')) { 
-		save_cdata();
-	} else { 
-		# Manpage citations are in bold.
-		bold_on();
-	}
-});
-sgml('</REFENTRYTITLE>', sub { 
-	if($_[0]->in('REFMETA')) {
-		$raw_cdata--;
-		$manpage_title = pop_output();
-	}
-	else { font_off(); }
-});
-
-sgml('<MANVOLNUM>', sub { 
-	if($_[0]->in('REFMETA')) { 
-		save_cdata();	
-	} else {
-		# Manpage citations use ().
-		output '(';
-	}
-});
-sgml('</MANVOLNUM>', sub { 
-	if($_[0]->in('REFMETA')) {
-		$raw_cdata--;
-		$manpage_sect = pop_output();
-	}
-	else { output ')' }
-});
-
-sgml('<REFMISCINFO>', \&save_cdata);
-sgml('</REFMISCINFO>', sub { 
-	$raw_cdata--;
-	$manpage_misc = fold_string(pop_output());
-});
-
-
-# NAME section
-man_sgml('<REFNAMEDIV>', "\n.SH NAME\n");
-
-sgml('<REFNAME>', \&save_cdata);
-sgml('</REFNAME>', sub { 
-	$raw_cdata--;
-	push(@manpage_names, pop_output());
-});
-
-sgml('<REFPURPOSE>', \&save_cdata);
-sgml('</REFPURPOSE>', sub { 
-	$raw_cdata--;
-	my $manpage_purpose = fold_string(pop_output());
-	
-	for(my $i = 0; $i < $#manpage_names; $i++) {
-		output fold_string($manpage_names[$i]), ', ';
-	}
-
-	output fold_string($manpage_names[$#manpage_names]);
-	output " \\- $manpage_purpose\n";
-
-	$newline_last = 1;
-
-	foreach(@manpage_names) {
-		# Don't link to itself
-		if($_ ne $manpage_title) {
-			print LINKSFILE "$manpage_title.$manpage_sect	$_.$manpage_sect\n";
-		}
-	}
-});
-	
-man_sgml('<REFCLASS>', "\n.sp\n");
-
-#RefDescriptor
-
-
-
-
-
-########################################################################
-#
-# SYNOPSIS section and synopses
-#
-########################################################################
-
-man_sgml('<REFSYNOPSISDIV>', "\n.SH SYNOPSIS\n");
-man_sgml('</REFSYNOPSISDIV>', "\n");
-
-## FIXME! Must be made into block elements!!
-#sgml('<FUNCSYNOPSIS>', \&bold_on);
-#sgml('</FUNCSYNOPSIS>', \&font_off);
-#sgml('<CMDSYNOPSIS>', \&bold_on);
-#sgml('</CMDSYNOPSIS>', \&font_off);
-
-man_sgml('<FUNCSYNOPSIS>', sub {
-	man_output("\n.sp\n");
-	bold_on();
-});
-man_sgml('</FUNCSYNOPSIS>', sub {
-	font_off();
-	man_output("\n");
-});
-
-man_sgml('<CMDSYNOPSIS>', "\n\n");
-man_sgml('</CMDSYNOPSIS>', "\n\n");
-
-man_sgml('<FUNCPROTOTYPE>', "\n.sp\n");
-
-# Arguments to functions.  This is C convention.
-sub paramdef
-{
-	if($_[0]->parent->ext->{'inparams'}) {
-		output ', ';
-	} else {
-		output ' (';
-		$_[0]->parent->ext->{'inparams'} = 1;
-	}
-}
-man_sgml('<PARAMDEF>', \&paramdef);
-man_sgml('</FUNCPROTOTYPE>', ");\n");
-man_sgml('<VOID>', "(void");
-man_sgml('<VARARGS>', "(...");
-
-
-
-sub group_start
-{
-	if(not $_[0]->parent->in('TERM')) {
-		if($_[0]->attribute('CHOICE')->value =~ /opt/i) {
-			output ' [';
-		} elsif($_[0]->attribute('CHOICE')->value =~ /req/i) {
-			output ' {';
-		}
-	}
-	$_[0]->ext->{'count'} = 1;
-}
-sub group_end
-{
-	if($_[0]->attribute('REP')->value =~ /^Repeat/i) {
-		italic_on();
-		output ' ...';
-		font_off();
-	}
-	if(not $_[0]->parent->in('TERM')) {
-		if($_[0]->attribute('CHOICE')->value =~ /opt/i) {
-			output ' ]';
-		} elsif($_[0]->attribute('CHOICE')->value =~ /req/i) {
-			output ' }';
-		}
-	}
-}
-
-sub arg_start
-{
-	# my $choice = $_[0]->attribute('CHOICE')->value;
-
-	# The content model for CmdSynopsis doesn't include #PCDATA,
-	# so we won't see any of the whitespace in the source file,
-	# so we have to add it after each component.
-	output ' ';
-
-	if($_[0]->in('GROUP')) {
-		output '| ' if $_[0]->parent->ext->{'count'} > 1;
-		$_[0]->parent->ext->{'count'}++;
-	} elsif($_[0]->attribute('CHOICE')->value =~ /opt/i) {
-		output '[ ';
-	}
-	bold_on();
-}
-sub arg_end
-{
-	font_off();
-	if($_[0]->attribute('REP')->value =~ /^Repeat/i) {
-		italic_on();
-		output ' ...';
-		font_off();
-	}
-	if($_[0]->attribute('CHOICE')->value =~ /opt/i and
-           not $_[0]->in('GROUP')) {
-		output ' ]';
-	}
-}
-
-sgml('<ARG>', \&arg_start);
-sgml('</ARG>', \&arg_end);
-sgml('<GROUP>', \&group_start);
-sgml('</GROUP>', \&group_end);
-
-sgml('<OPTION>', \&bold_on);
-sgml('</OPTION>', \&font_off);
-
-man_sgml('<SBR>', "\n   ");
-
-
-########################################################################
-#
-# General sections
-#
-########################################################################
-
-# The name of the section is handled by TITLE.  This just sets
-# up the roff markup.
-man_sgml('<REFSECT1>', "\n.SH ");
-man_sgml('<REFSECT2>', "\n.SS ");
-man_sgml('<REFSECT3>', "\n.SS ");
-
-
-########################################################################
-#
-# Titles, metadata.
-#
-########################################################################
-
-sgml('<TITLE>', sub {
-	if($_[0]->in('REFERENCE') or $_[0]->in('BOOK')) {
-		$write_manpages = 1;
-	}
-	save_cdata();
-});
-sgml('</TITLE>', sub { 
-	my $title = fold_string(pop_output());
-	$raw_cdata--;
-	
-	if($_[0]->in('REFERENCE') or $_[0]->in('BOOK')) {
-		# We use TITLE of enclosing Reference or Book as manual name
-		$manpage_manual = $title;
-		$write_manpages = 0;
-	}
-	elsif(exists $_[0]->parent->ext->{'title'}) {
-		# By far the easiest case.  Just fold the string as
-		# above, and then set the parent element's variable.
-		$_[0]->parent->ext->{'title'} = $title;
-	}
-	else {
-		# If the parent element's handlers are lazy, 
-		# output the folded string for them :)
-		# We assume they want uppercase and a newline.
-		output '"', uc($title), "\"\n";
-		$newline_last = 1;
-	}
-});
-
-sgml('<ATTRIBUTION>', sub { push_output('string') });
-sgml('</ATTRIBUTION>', sub { $_[0]->parent->ext->{'attribution'} = pop_output(); });
-
-
-# IGNORE.
-sgml('<DOCINFO>', sub { push_output('nul'); });
-sgml('</DOCINFO>', sub { pop_output(); });
-sgml('<REFSECT1INFO>', sub { push_output('nul'); });
-sgml('</REFSECT1INFO>', sub { pop_output(); });
-sgml('<REFSECT2INFO>', sub { push_output('nul'); });
-sgml('</REFSECT2INFO>', sub { pop_output(); });
-sgml('<REFSECT3INFO>', sub { push_output('nul'); });
-sgml('</REFSECT3INFO>', sub { pop_output(); });
-
-sgml('<INDEXTERM>', sub { push_output('nul'); });
-sgml('</INDEXTERM>', sub { pop_output(); });
-
-
-########################################################################
-#
-# Set bold on enclosed content 
-#
-########################################################################
-
-sgml('<APPLICATION>', \&bold_on);	sgml('</APPLICATION>', \&font_off);
-
-sgml('<CLASSNAME>', \&bold_on);		sgml('</CLASSNAME>', \&font_off);
-sgml('<STRUCTNANE>', \&bold_on);	sgml('</STRUCTNAME>', \&font_off);
-sgml('<STRUCTFIELD>', \&bold_on);	sgml('</STRUCTFIELD>', \&font_off);
-sgml('<SYMBOL>', \&bold_on);		sgml('</SYMBOL>', \&font_off);
-sgml('<TYPE>', \&bold_on);		sgml('</TYPE>', \&font_off);
-
-sgml('<ENVAR>', \&bold_on);	sgml('</ENVAR>', \&font_off);
-
-sgml('<FUNCTION>', \&bold_on);	sgml('</FUNCTION>', \&font_off);
-
-sgml('<EMPHASIS>', \&bold_on);	sgml('</EMPHASIS>', \&font_off);
-
-sgml('<ERRORNAME>', \&bold_on);	sgml('</ERRORNAME>', \&font_off);
-# ERRORTYPE
-
-sgml('<COMMAND>', \&bold_on);	sgml('</COMMAND>', \&font_off);
-
-sgml('<GUIBUTTON>', \&bold_on);	sgml('</GUIBUTTON>', \&font_off);
-sgml('<GUIICON>', \&bold_on);	sgml('</GUIICON>', \&font_off);
-# GUILABEL
-# GUIMENU
-# GUIMENUITEM
-# GUISUBMENU
-# MENUCHOICE
-# MOUSEBUTTON
-
-sgml('<ACCEL>', \&bold_on);	sgml('</ACCEL>', \&font_off);
-sgml('<KEYCAP>', \&bold_on);	sgml('</KEYCAP>', \&font_off);
-sgml('<KEYSYM>', \&bold_on);	sgml('</KEYSYM>', \&font_off);
-# KEYCODE
-# KEYCOMBO
-# SHORTCUT
-
-sgml('<USERINPUT>', \&bold_on);	sgml('</USERINPUT>', \&font_off);
-
-sgml('<INTERFACEDEFINITION>', \&bold_on);
-sgml('</INTERFACEDEFINITION>', \&font_off);
-
-# May need to look at the CLASS
-sgml('<SYSTEMITEM>', \&bold_on);
-sgml('</SYSTEMITEM>', \&font_off);
-
-
-
-
-
-########################################################################
-#
-# Set italic on enclosed content 
-#
-########################################################################
-
-sgml('<FIRSTTERM>', \&italic_on);	sgml('</FIRSTTERM>', \&font_off);
-
-sgml('<FILENAME>', \&italic_on);	sgml('</FILENAME>', \&font_off);
-sgml('<PARAMETER>', \&italic_on);	sgml('</PARAMETER>', \&font_off);
-sgml('<PROPERTY>', \&italic_on);	sgml('</PROPERTY>', \&font_off);
-
-sgml('<REPLACEABLE>', sub {
-	italic_on();
-	if($_[0]->in('TOKEN')) {
-		# When tokenizing, follow more 'intuitive' convention
-		output "<";
-	}
-});
-sgml('</REPLACEABLE>', sub {
-	if($_[0]->in('TOKEN')) {
-		output ">";
-	}
-	font_off();
-});
-
-sgml('<CITETITLE>', \&italic_on);	sgml('</CITETITLE>', \&font_off);
-sgml('<FOREIGNPHRASE>', \&italic_on);	sgml('</FOREIGNPHRASE>', \&font_off);
-
-sgml('<LINEANNOTATION>', \&italic_on);	sgml('</LINEANNOTATION>', \&font_off);
-
-
-
-
-
-
-########################################################################
-#
-# Other 'inline' elements 
-#
-########################################################################
-
-man_sgml('<EMAIL>', '<');
-man_sgml('</EMAIL>', '>');
-man_sgml('<OPTIONAL>', '[');
-man_sgml('</OPTIONAL>', ']');
-
-man_sgml('</TRADEMARK>', "\\u\\s-2TM\\s+2\\d");
-
-man_sgml('<COMMENT>', "[Comment: ");
-man_sgml('</COMMENT>', "]");
-
-man_sgml('<QUOTE>', "``");
-man_sgml('</QUOTE>', "''");
-
-#man_sgml('<LITERAL>', '"');
-#man_sgml('</LITERAL>', '"');
-
-# No special presentation:
-
-# AUTHOR
-# AUTHORINITIALS
-
-# ABBREV
-# ACTION
-# ACRONYM
-# ALT
-# CITATION
-# PHRASE
-# QUOTE
-# WORDASWORD
-
-# COMPUTEROUTPUT
-# MARKUP
-# PROMPT
-# RETURNVALUE
-# SGMLTAG
-# TOKEN
-
-# DATABASE
-# HARDWARE
-# INTERFACE
-# MEDIALABEL
-
-# There doesn't seem to be a good way to represent LITERAL in -man
-
-
-
-########################################################################
-#
-# Paragraph and paragraph-like elements 
-#
-########################################################################
-
-sub para_start {
-	output "\n" unless $newline_last++;
-
-	# In lists, etc., don't start paragraph with .PP since
-	# the indentation will be gone.
-
-	if($_[0]->parent->ext->{'nobreak'}==1) {
-		# Usually this is the FIRST element of
-		# a hanging tag, so we MUST not do a full
-		# paragraph break.
-		$_[0]->parent->ext->{'nobreak'} = 2;
-	} elsif($_[0]->parent->ext->{'nobreak'}==2) {
-		# Usually these are the NEXT elements of
-		# a hanging tag.  If we break using a blank
-		# line, we're okay.
-		output "\n";
-	} else {
-		# Normal case. (For indented blocks too, at least
-		# -man isn't so braindead in this area.)
-		output ".PP\n";
-	}
-}
-# Actually applies to a few other block elements as well
-sub para_end {
-	output "\n" unless $newline_last++; 
-}
-
-sgml('<PARA>', \&para_start);
-sgml('</PARA>', \&para_end);
-sgml('<SIMPARA>', \&para_start);
-sgml('</SIMPARA>', \&para_end);
-
-# Nothing special, except maybe FIXME set nobreak.
-sgml('<INFORMALEXAMPLE>', \&para_start);
-sgml('</INFORMALEXAMPLE>', \&para_end);
-
-
-
-
-
-########################################################################
-#
-# Blocks using SS sections
-#
-########################################################################
-
-# FIXME: We need to consider the effects of SS
-# in a hanging tag :(
-
-# Complete with the optional-title dilemma (again).
-sgml('<ABSTRACT>', sub {
-	$_[0]->ext->{'title'} = 'ABSTRACT';
-	output "\n" unless $newline_last++;
-	push_output('string');
-});
-sgml('</ABSTRACT>', sub {
-	my $content = pop_output();
-	
-	# As ABSTRACT is never on the same level as RefSect1,
-	# this leaves us with only .SS in terms of -man macros.
-	output ".SS \"", uc($_[0]->ext->{'title'}), "\"\n";
-
-	output $content;
-	output "\n" unless $newline_last++;
-});
-
-# Ah, I needed a break.  Example always has a title.
-man_sgml('<EXAMPLE>', "\n.SS ");
-sgml('</EXAMPLE>', \&para_end);
-
-# Same with sidebar.
-man_sgml('<SIDEBAR>', "\n.SS ");
-sgml('</SIDEBAR>', \&para_end);
-
-# NO title.
-man_sgml('<HIGHLIGHTS>', "\n.SS HIGHLIGHTS\n");
-sgml('</HIGHLIGHTS>', \&para_end);
-
-
-
-
-########################################################################
-#
-# Indented 'Block' elements 
-#
-########################################################################
-
-sub indent_block_start
-{
-	output "\n" unless $newline_last++;
-	output ".sp\n.RS\n";
-}
-sub indent_block_end
-{
-	output "\n" unless $newline_last++;
-	output ".RE\n";
-}
-
-# This element is almost like an admonition (below),
-# only the default title is blank :)
-
-sgml('<BLOCKQUOTE>', sub { 
-	$_[0]->ext->{'title'} = ''; 
-	output "\n" unless $newline_last++;
-	push_output('string');
-});
-sgml('</BLOCKQUOTE>', sub {
-	my $content = pop_output();
-
-	indent_block_start();
-	
-	if($_[0]->ext->{'title'}) {
-		output ".B \"", $_[0]->ext->{'title'}, ":\"\n";
-	}
-	
-	output $content;
-
-	if($_[0]->ext->{'attribution'}) {
-		output "\n" unless $newline_last++;
-		# One place where roff's space-sensitivity makes sense :)
-		output "\n                -- ";
-		output $_[0]->ext->{'attribution'} . "\n";
-	}
-	
-	indent_block_end();
-});
-
-# Set off admonitions from the rest of the text by indenting.
-# FIXME: Need to check if this works inside paragraphs, not enclosing them.
-sub admonition_end {
-	my $content = pop_output();
-
-	indent_block_start();
-	
-	# When the admonition is only one paragraph,
-	# it looks nicer if the title was inline.
-	my $num_para;
-	while ($content =~ /^\.PP/gm) { $num_para++ }
-	if($num_para==1) {
-		$content =~ s/^\.PP\n//;
-	}
-	
-	output ".B \"" . $_[0]->ext->{'title'} . ":\"\n";
-	output $content;
-	
-	indent_block_end();
-}
-
-sgml('<NOTE>', sub {
-	# We can't see right now whether or not there is a TITLE
-	# element, so we have to save the output now and add it back
-	# at the end of this admonition.
-	$_[0]->ext->{'title'} = 'Note';
-
-	# Although admonition_end's indent_block_start will do this,
-	# we need to synchronize the output _now_
-	output "\n" unless $newline_last++;
-
-	push_output('string');
-});
-sgml('</NOTE>', \&admonition_end);
-
-# Same as above.
-sgml('<WARNING>', sub { 
-	$_[0]->ext->{'title'} = 'Warning'; 
-	output "\n" unless $newline_last++;
-	push_output('string');
-});
-sgml('</WARNING>', \&admonition_end);
-
-sgml('<TIP>', sub {
-	$_[0]->ext->{'title'} = 'Tip';
-	output "\n" unless $newline_last++;
-	push_output('string');
-});
-sgml('</TIP>', \&admonition_end);
-sgml('<CAUTION>', sub {
-	$_[0]->ext->{'title'} = 'Caution';
-	output "\n" unless $newline_last++;
-	push_output('string');
-});
-sgml('</CAUTION>', \&admonition_end);
-
-sgml('<IMPORTANT>', sub {
-	$_[0]->ext->{'title'} = 'Important';
-	output "\n" unless $newline_last++;
-	push_output('string');
-});
-sgml('</IMPORTANT>', \&admonition_end);
-
-
-
-
-
-
-
-
-
-
-
-
-########################################################################
-#
-# Verbatim displays. 
-#
-########################################################################
-
-sub verbatim_start {
-	output "\n" unless $newline_last++;
-	
-	if($_[0]->parent->ext->{'nobreak'}==1) {
-		# Usually this is the FIRST element of
-		# a hanging tag, so we MUST not do a full
-		# paragraph break.
-		$_[0]->parent->ext->{'nobreak'} = 2;
-	} else {
-		output "\n";
-	}
-	
-	output(".nf\n") unless $nocollapse_whitespace++;
-}
-
-sub verbatim_end {
-	output "\n" unless $newline_last++;
-	output(".fi\n") unless --$nocollapse_whitespace;
-}
-
-sgml('<PROGRAMLISTING>', \&verbatim_start); 
-sgml('</PROGRAMLISTING>', \&verbatim_end);
-
-sgml('<SCREEN>', \&verbatim_start); 
-sgml('</SCREEN>', \&verbatim_end);
-
-sgml('<LITERALLAYOUT>', \&verbatim_start); 
-sgml('</LITERALLAYOUT>', \&verbatim_end);
-
-#sgml('<SYNOPSIS>', sub {
-#	if($_[0]->attribute('FORMAT')->value =~ /linespecific/i) {
-#		&verbatim_start;
-#	} else {
-#		roffcmd("");
-#	}
-#});
-#
-#sgml('</SYNOPSIS>', sub {
-#	if($_[0]->attribute('FORMAT')->value =~ /linespecific/i) {
-#		&verbatim_end;
-#	}
-#	else {
-#		roffcmd("");# not sure about this.
-#	}
-#});
-sgml('<SYNOPSIS>', \&verbatim_start);
-sgml('</SYNOPSIS>', \&verbatim_end);
-
-
-
-
-
-
-
-
-
-########################################################################
-#
-# Lists
-#
-########################################################################
-
-# Indent nested lists.
-sub indent_list_start {
-	if($list_nestlevel++) {
-		output "\n" unless $newline_last++;
-		output ".RS\n";
-	}
-}
-sub indent_list_end {
-	if(--$list_nestlevel) {
-		output "\n" unless $newline_last++;
-		output ".RE\n";
-	}
-}
-
-sgml('<VARIABLELIST>', \&indent_list_start);
-sgml('</VARIABLELIST>', \&indent_list_end);
-sgml('<ITEMIZEDLIST>', \&indent_list_start);
-sgml('</ITEMIZEDLIST>', \&indent_list_end);
-sgml('<ORDEREDLIST>', sub { 
-	indent_list_start();
-	$_[0]->ext->{'count'} = 1;
-});
-sgml('</ORDEREDLIST>', \&indent_list_end);
-sgml('<GLOSSLIST>', \&indent_list_start);
-sgml('</GLOSSLIST>', \&indent_list_end);
-		
-# Output content on one line, bolded.
-sgml('<TERM>', sub { 
-	output "\n" unless $newline_last++;
-	output ".TP\n";
-	bold_on();
-	push_output('string');
-});
-sgml('</TERM>', sub { 
-	my $term = pop_output();
-	$term =~ tr/\n/ /;
-	output $term;
-	font_off();
-	output "\n";
-	$newline_last = 1;
-});
-sgml('<GLOSSTERM>', sub { 
-	output "\n" unless $newline_last++;
-	output ".TP\n";
-	bold_on();
-	push_output('string');
-});
-sgml('</GLOSSTERM>', sub { 
-	my $term = pop_output();
-	$term =~ tr/\n/ /;
-	output $term;
-	font_off();
-	output "\n";
-	$newline_last = 1;
-});
-	
-sgml('<LISTITEM>', sub {
-	# A bulleted list.
-	if($_[0]->in('ITEMIZEDLIST')) {
-		output "\n" unless $newline_last++;
-		output ".TP 0.2i\n\\(bu\n";
-	}
-
-	# Need numbers.
-	# Assume Arabic numeration for now.
-	elsif($_[0]->in('ORDEREDLIST')) {
-		output "\n" unless $newline_last++;
-		output ".TP 3\n", $_[0]->parent->ext->{'count'}++, ". \n";
-	}
-	
-	$_[0]->ext->{'nobreak'} = 1;
-});
-sgml('<GLOSSDEF>', sub {
-	$_[0]->ext->{'nobreak'} = 1;
-});
-
-sgml('<SIMPLELIST>', sub {
-	$_[0]->ext->{'first_member'} = 1;
-});
-
-sgml('<MEMBER>', sub {
-	my $parent = $_[0]->parent;
-	
-	if($parent->attribute('TYPE')->value =~ /Inline/i) {
-		if($parent->ext->{'first_member'}) { 
-			# If this is the first member don't put any commas
-			$parent->ext->{'first_member'} = 0;
-		} else {
-			output ", ";
-		}
-	} elsif($parent->attribute('TYPE')->value =~ /Vert/i) {
-		output "\n" unless $newline_last++;
-		output "\n";
-	}
-});
-
-
-
-
-
-########################################################################
-#
-# Stuff we don't know how to handle (yet) 
-#
-########################################################################
-
-# Address blocks:
-
-# Credit stuff:
-# ACKNO
-# ADDRESS
-# AFFILIATION
-# ARTPAGENUMS
-# ATTRIBUTION
-# AUTHORBLURB
-# AUTHORGROUP
-# OTHERCREDIT
-# HONORIFIC
-
-# Areas:
-# AREA
-# AREASET
-# AREASPEC
-
-
-
-
-
-########################################################################
-#
-# Linkage, cross references
-#
-########################################################################
-
-# Print the URL
-sgml('</ULINK>', sub {
-	output ' <URL:', $_[0]->attribute('URL')->value, '>';
-	$newline_last = 0;
-});
-
-# If cross reference target is a RefEntry, 
-# output CiteRefEntry-style references.
-sgml('<XREF>', sub {
-	my $id = $_[0]->attribute('LINKEND')->value;
-	my $manref = $Refs->get("refentry:$id");
-
-	if($manref) {
-		my ($title, $sect) = ($manref =~ /(.*)(\(.*\))/);
-		bold_on();
-		output $title;
-		font_off();
-		output $sect;
-	} else {
-		$blank_xrefs++ if $write_manpages;
-		output "[XRef to $id]";
-	}
-
-	$newline_last = 0;
-});
-
-# Anchor
-
-
-
-
-########################################################################
-#
-# Other handlers 
-#
-########################################################################
-
-man_sgml('|[lt    ]|', '<');
-man_sgml('|[gt    ]|', '>');
-man_sgml('|[amp   ]|', '&');
-
-#
-# Default handlers (uncomment these if needed).  Right now, these are set
-# up to gag on any unrecognised elements, sdata, processing-instructions,
-# or entities.
-#
-# sgml('start_element',sub { die "Unknown element: " . $_[0]->name; });
-# sgml('end_element','');
-
-# This is for weeding out and escaping certain characters.
-# This looks like it's inefficient since it's done on every line, but
-# in reality, SGMLSpm and sgmlspl parsing ESIS takes _much_ longer.
-
-sgml('cdata', sub
-{ 
-	if(!$write_manpages) { return; }
-	elsif($raw_cdata) { output $_[0]; return; }
-	
-	# Escape backslashes
-	$_[0] =~ s/\\/\\\\/g;
-
-	# In non-'pre'-type elements:
-	if(!$nocollapse_whitespace) {
-		# Change tabs to spaces
-		$_[0] =~ tr/\t/ /;
-
-		# Do not allow indents at beginning of line
-		# groff chokes on that.
-		if($newline_last) { 
-			$_[0] =~ s/^ +//;
-
-			# If the line is all blank, don't do anything.
-			if($_[0] eq '') { return; }
-			
-			$_[0] =~ s/^\./\\\&\./;
-
-			# Argh... roff doesn't like ' either...
-			$_[0] =~ s/^\'/\\\&\'/;
-		}
-	}
-
-	$newline_last = 0;
-
-	output $_[0];
-});
-
-
-# When in whitespace-collapsing mode, we disallow consecutive newlines.
-
-sgml('re', sub
-{
-	if($nocollapse_whitespace || !$newline_last) {
-		output "\n";
-	}
-
-	$newline_last = 1;
-});
-
-sgml('sdata',sub
-{
-	if($_[0] =~ /\[minus \]/) { output "-"; }
-	elsif($_[0] =~ /\[copy  \]/) { output "(C)"; }
-	elsif($_[0] =~ /\[nbsp  \]/) { output " "; }
-	else { die "Unknown SDATA: " . $_[0]; }
-});
-sgml('pi',sub { die "Unknown processing instruction: " . $_[0]; });
-sgml('entity',sub { die "Unknown external entity: " . $_[0]->name; });
-sgml('start_subdoc',sub { die "Unknown subdoc entity: " . $_[0]->name; });
-sgml('end_subdoc','');
-sgml('conforming','');
-
-1;
-
diff --git a/external/privoxy/utils/docbook2man/docbook2man-spec.pl.1 b/external/privoxy/utils/docbook2man/docbook2man-spec.pl.1
deleted file mode 100644
index 4d2bf3b..0000000
--- a/external/privoxy/utils/docbook2man/docbook2man-spec.pl.1
+++ /dev/null
@@ -1,99 +0,0 @@
-.\" This manpage has been automatically generated by docbook2man 
-.\" from a DocBook document.  This tool can be found at:
-.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
-.\" Please send any bug reports, improvements, comments, patches, 
-.\" etc. to Steve Cheng <steve@xxxxxxxxxxxxxxx>.
-.TH "DOCBOOK2MAN-SPEC.PL" "1" "27 June 2002" "" ""
-.SH NAME
-docbook2man-spec.pl \- convert DocBook RefEntries to man pages
-.SH SYNOPSIS
-
-\fBsgmlspl\fR \fBdocbook2man-spec.pl\fR
-
-
-\fBnsgmls\fR [ \fB\fIsgml document\fB\fR ]\fB| sgmlspl\fR \fBdocbook2man-spec.pl\fR
-
-.SH "DESCRIPTION"
-.PP
-\fBdocbook2man\fR is a sgmlspl spec file that produced man
-pages (using the -man macros) from DocBook RefEntry markup.
-.PP
-The program reads ESIS produced by nsgmls (or other SGML parsers) from
-standard input.  Markup not found in RefEntry is discarded.
-.PP
-Its output, the converted man pages, are written to the current directory.  If
-RefMeta information is not specified in a
-RefEntry, then the man page will be written to standard
-output.
-.PP
-The file \fImanpage.links\fR will also be created, which contains
-any aliases of the manpages generated.  This file is in the format:
-
-.nf
-\fI<man page>\fR \fI<alias
-manpage>\fR
-.fi
-.PP
-The \fImanpage.refs\fR file keeps track of
-XRef references.  Note that if the input document has any
-forward references, then \fBdocbook2man\fR may have to be
-invoked twice (the first time updating \fImanpage.refs\fR) to
-resolve them.
-.SH "REQUIREMENTS"
-
-The SGMLSpm package from CPAN.  This package includes the sgmlspl script
-that is also needed.
-.SH "LIMITATIONS"
-.PP
-Trying \fBdocbook2man\fR on non-DocBook or non-conformant
-SGML results in undefined behavior. :-)
-.PP
-This program is a slow, dodgy Perl script.
-.PP
-This program does not come close to supporting all the possible markup
-in DocBook, and may produce wrong output in some cases with supported
-markup.
-.SH "TO DO"
-.PP
-Obvious stuff:
-.TP 0.2i
-\(bu
-Fix \fBdocbook2man\fR breakages found in
-the test documents, especially
-\fIweird.sgml\fR.
-.TP 0.2i
-\(bu
-Add new element handling and fix existing handling.  
-Be robust.  
-.TP 0.2i
-\(bu
-Produce cleanest, readable man output as possible (unlike some
-other converters).  Follow Linux
-\fBman\fR(7)
-convention.  As conversion to man pages is usually not done very often, it is
-better to be slower/more complicated than to produce wrong output.  Also if
-someone wants to give up using DocBook for whatever reason, the last-converted
-man pages can then be maintained manually.  
-.TP 0.2i
-\(bu
-Make it faster. I think most of the speed problems so far is with parsing
-ESIS.  Rewrite \fISGMLS.pm\fR with C and/or get input directly
-from \fBSP\fR.
-.TP 0.2i
-\(bu
-Support other (human) languages.  But what to do with non-ASCII charsets?
-SGMLSpm doesn't report them and \fBroff\fR does not grok them.
-[Comment: text after enclosed lists (and SS blocks) will break docbook2man]
-If we do this, more people can use DocBook.
-.SH "COPYRIGHT"
-.PP
-Copyright (C) 1998-1999 Steve Cheng <steve@xxxxxxxxxxxxxxx>
-.PP
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-.PP
-You should have received a copy of the GNU General Public License along with
-this program; see the file \fICOPYING\fR.  If not, please write
-to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
diff --git a/external/privoxy/utils/filter2docs.pl b/external/privoxy/utils/filter2docs.pl
deleted file mode 100755
index b47e92e..0000000
--- a/external/privoxy/utils/filter2docs.pl
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/usr/bin/perl
-
-# $Id: filter2docs.pl,v 1.6 2009/01/13 16:48:09 fabiankeil Exp $
-# $Source: /cvsroot/ijbswa/current/utils/filter2docs.pl,v $
-
-# Parse the filter names and descriptions from a filter file and
-# spit out copy&paste-ready markup for the various places in
-# configuration and documentation where all filters are listed.
-
-use strict;
-use warnings;
-
-my (%comment_lines, %action_lines, %sgml_source_1, %sgml_source_2);
-
-sub main() {
-
-    die "Usage: $0 filter-file\n" unless (@ARGV == 1) ;
-    open(INPUT, "< $ARGV[0]") or die "Coudln't open input file $ARGV[0] because $!\n";
-
-    parse_file();
-    print_markup();
-}
-
-sub parse_file() {
-    while (<INPUT>) {
-        if (/^((?:(?:SERVER|CLIENT)-HEADER-)?(?:FILTER|TAGGER)): ([-\w]+) (.*)$/) {
-            my $type_uc = $1;
-            my $name = $2;
-            my $description = $3;
-            my $type = lc($type_uc);
-
-            my $white_space = ' ' x (($type eq 'filter' ? 20 : 27) - length($name));
-
-            $comment_lines{$type} .= "#     $name:" . $white_space . "$description\n";
-            $action_lines{$type}  .= "+$type" . "{$name} \\\n";
-            $sgml_source_1{$type} .= "   <para>\n    <anchor id=\"$type-$name\">\n" .
-                "    <screen>+$type" . "{$name}" . $white_space .
-                "# $description</screen>\n   </para>\n";
-            $sgml_source_2{$type} .= ' -<link linkend="' . $type_uc . "-" .
-                uc($name) . "\">$type" . "{$name}</link> \\\n";
-        }
-    }
-}
-
-sub print_markup() {
-
-    my @filter_types = (
-        'filter',
-        'server-header-filter',
-        'client-header-filter',
-        'server-header-tagger',
-        'client-header-tagger'
-    );
-
-    foreach my $type (@filter_types) {
-
-        next unless defined $action_lines{$type};
-
-        print "=" x 90;
-        
-        print <<"        DOCMARKUP";
-
-Producing $type markup:
-
-Comment lines for default.action:
-
-$comment_lines{$type}
-Block of $type actions for default.action:
-
-$action_lines{$type}
-SGML Source for AF chapter in U-M:
-
-$sgml_source_1{$type}
-SGML Source for AF Tutorial chapter in U-M:
-
-$sgml_source_2{$type}
-        DOCMARKUP
-    }
-}
-
-main();
diff --git a/external/privoxy/utils/ldp_print/README b/external/privoxy/utils/ldp_print/README
deleted file mode 100644
index 833ae0b..0000000
--- a/external/privoxy/utils/ldp_print/README
+++ /dev/null
@@ -1,80 +0,0 @@
-
-######################################################################
-    ldp_print -  print tool/script for DocBook SGML/XML documents 
-######################################################################
-
- Copyright (C) 2002-2000  - Greg Ferguson (gferg@xxxxxxxxxxxxxxx)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-
-######################################################################
-
-This process/script is used in the production environment for the
-LDP.  It relies on the HTMLDOC software package (GPL'ed) which can be
-obtained from the Easy Software Products (c) web site:
-
-        http://www.easysw.com/htmldoc/
-
-This process creates a PDF variant from the single-file HTML
-representation of a DocBook SGML (or XML) instance. The simple
-wrapper script (ldp_print) assumes that the file was created using
-{open}jade in a manner similar to:
-
-        jade -t sgml -i html -V nochunks -d $style $fname > $fname.html
-
-Give the script the filename as an argument. It will then parse the
-file into 'title.html' and 'body.html' and send each to htmldoc (as
-the corresponding title page and body of the document).
-
-
-CAVEATS
-=======
-
-o  Assumes perl is in /usr/bin; adjust if necessary
-
-o  You may need to specify where the htmldoc executable resides.
-   The script assumes it's within your $PATH.
-
-o  If you want Postscript as an output variant, uncomment the
-   appropriate lines (see below).
-
-o  Relies on output from a DocBook instance created via DSSSL/{open}jade!
-
-o  Cleans up (removes) the intermediate files it creates (but not the
-   PDF or Postscript files, obviously!)
-
-o  Works silently; PDF (PostScript) will be created in the same directory
-   as was specified for the input (single-file HTML) file.
-
-o  Provided without warranty or support!
-
-o  I ran into a problem with htmldoc v1.8.8 which required a source
-   code change (I was getting a core dump from the htmldoc process).
-   Here is the change required:
-
-	htmldoc/ps-pdf.cxx :
-	3662,3665d3661
-	<      /* gjf = 11Oct2000 */
-	<      if( temprow == NULL )
-	<          break;
-	< 
-
-   UPDATE (2001-10-10): It appears that later versions of htmldoc
-   have this problem corrected. The patch is not required.
-
-====
-Greg Ferguson / gferg (at) metalab.unc.edu
-11 Jan 2000
-
diff --git a/external/privoxy/utils/ldp_print/VERSION b/external/privoxy/utils/ldp_print/VERSION
deleted file mode 100644
index 8f00eb7..0000000
--- a/external/privoxy/utils/ldp_print/VERSION
+++ /dev/null
@@ -1 +0,0 @@
-0.7.0, 2002-04-04
diff --git a/external/privoxy/utils/ldp_print/fix_print_html.lib b/external/privoxy/utils/ldp_print/fix_print_html.lib
deleted file mode 100644
index fdb9ab4..0000000
--- a/external/privoxy/utils/ldp_print/fix_print_html.lib
+++ /dev/null
@@ -1,227 +0,0 @@
-#
-# fix_print_html.lib
-#
-#   Dan Scott  / <dan.scott (at) acm.org>
-#   Ferg       / <gferg (at) sgi.com>
-#
-#   Used to prepare single-file HTML variant for PDF/Postscript creation
-#   thru htmldoc.
-#
-# log:
-#     16Oct2000 - 0.1   - initial entry <gferg (at) sgi.com>
-#     03Apr2001 - 0.2   - fix for <preface>
-#     05Jul2001 - 0.3   - fix for <tt> and -f
-#     12Oct2001 - 0.4   - fix for sections; loop thru both files (body/title)
-#     27Nov2001 - 0.5   - fixed bug in determining where doc-index lies
-#     18Jan2002 - 0.5.1 - entity fix (822*)
-#     02Apr2002 - 0.6   - misc fixes (bibliography/appendix, etc).
-#     04Apr2002 - 0.7   - fix for newer DSSSL
-#
-
-sub fix_print_html {
-
-   my($in,$out,$ttl) = @_;
-
-   open(IN_FILE, "< $in") || do {
-        print "fix_print_html: cannot open $in: $!\n";
-        return 0;
-   };
-
-   my($buf, $ttl_buf) = '';
-   my($indx) = -1;
-   my($is_article) = 1;
-   while(<IN_FILE>) {
-
-         if( $indx == 1 ) {
-
-             # ignore everything until we see the chapter or sect
-             #
-             if( $_ =~ /CLASS="CHAP/i || $_ =~ /CLASS="PREF/i
-                 ||
-                 $_ =~ /CLASS="SECT/i )  {
-
-                 $buf .= $_;
-                 $indx++;
-
-             } else {
-                 next;
-             }
-
-         } elsif( $indx == 0 ) {
-
-             # write out the title page file
-             #
-             if( $_ =~ /CLASS="TOC"/ ) {
-
-                 $ttl_buf .= "></DIV>\n</BODY>\n</HTML>\n"; 
-                 $ttl_buf =~ s/<\/H1\n/<\/H1\n><P><BR><BR\n/ms;
-                 $ttl_buf =~ s/<HR><\/DIV\n><HR>/<HR><\/DIV\n>/ms;
-                 &fix_html(\$ttl_buf, 1);
-                 
-                 open(TOC_FILE, "> $ttl") || do {
-                      print "fix_print_html: cannot open $ttl: $!\n";
-                      close(IN_FILE);
-                      return 0;
-                 };
-                 print TOC_FILE $ttl_buf;
-                 close(TOC_FILE);
-                 $ttl_buf = '';
-                 $indx++;
-
-             } else {
-                $ttl_buf .= $_;
-             }
-
-         } elsif( $indx < 0 ) {
-
-             if( $_ =~ /CLASS="BOOK"/i ) {
-                 $is_article = 0;
-             }
-
-             # up to this point, both buffers get the line
-             #
-             if( $_ =~ /CLASS="TITLEPAGE"/ ) {
-
-                 $ttl_buf .= $_ . ">\n<P>\n<BR><BR><BR><BR>\n<\/P\n";
-                 $indx++;
-
-             } else {
-                 $buf .= $_;
-                 $ttl_buf .= $_;
-             }
-
-         } else {
-
-             $buf .= $_;
-         }
-   }
-   close(IN_FILE);
-
-
-   # fix body file
-   #
-   open(OUT_FILE, "> $out") || do {
-        print "fix_print_html: cannot open $out: $!\n";
-        return 0;
-   };
-
-   &fix_html(\$buf, $is_article);
-
-   print OUT_FILE $buf;
-   close(OUT_FILE);
-
-
-   return 1;
-}
-
-
-sub fix_html {
-   
-   my($buf, $is_article) = @_;
-   my($indx) = -1;
-
-
-   # make corrections and write out the file
-   #
-
-   $$buf =~ s/(\n><LI\n)><P\n(.*?)<\/P\n>/$1$2\n/gms;
-   $$buf =~ s/(\n><LI\n><DIV\nCLASS="FORMALPARA"\n)><P\n(.*?)<\/P\n>/$1$2\n/gms;
-   $$buf =~ s/(\n><LI\nSTYLE="[^\"]+"\n)><P\n(.*?)<\/P\n>/$1$2\n/gms;
-   if( $is_article == 0 ) {
-       $$buf =~ 
-         s/(\nCLASS="SECT[TION\d]+"\n>)<H1\n(.*?)<\/H1/$1<H0\n$2<\/H0/gims;
-       $$buf =~ 
-         s/(\nCLASS="SECT[TION\d]+"\n><HR>)<H1\n(.*?)<\/H1/$1<H0\n$2<\/H0/gims;
-   }
-   $$buf =~ s/<H1(\nCLASS="INDEXDIV"\n)(.*?)<\/H1/<H2$1$2<\/H2/gims;
-   if( ($indx = rindex($$buf, "<H1\n><A\nNAME=\"DOC-INDEX\"")) > -1 ) {
-       $$buf = substr($$buf, 0, $indx);
-       $$buf .= "\n<\/BODY>\n<\/HTML>\n\n";
-   } elsif( ($indx = rindex($$buf, "<H1\n><A\nNAME=\"doc-index\"")) > -1 ) {
-       $$buf = substr($$buf, 0, $indx);
-       $$buf .= "\n<\/BODY>\n<\/HTML>\n\n";
-   }
-
-   $$buf =~ s/\&\#13;//g;
-   $$buf =~ s/\&\#60;/\&lt;/g;
-   $$buf =~ s/\&\#62;/\&gt;/g;
-   $$buf =~ s/\&\#8211;/\-/g;
-   $$buf =~ s/\&\#8220;/\"/g;
-   $$buf =~ s/\&\#8221;/\"/g;
-   $$buf =~ s/WIDTH=\"\d\"//g;
-   $$buf =~ s/><[\/]*TBODY//g;
-   $$buf =~ s/><[\/]*THEAD//g;
-   $$buf =~ s/TYPE=\"1\"\n//gim;
-
-   $$buf =~ s/<P\nCLASS="LITERALLAYOUT"(.*?)<\/P/<P CLASS="LITERALLAYOUT"><FONT FACE=\"courier\"$1<\/FONT><\/P/gms;
-
-   my($cnt, $j) = 0;
-
-   if( $$buf !~ /<H1/ ) {
-       
-       # for newer docbook styles, set h2 to h1, etc.
-       #
-       for($cnt=2; $cnt < 7; $cnt++ ) {
-           $j = $cnt - 1;
-           $$buf =~ s/<H${cnt}/<H${j}/g;
-           $$buf =~ s/<\/H${cnt}/<\/H${j}/g;
-       }
-
-   } elsif( $is_article == 0 ) {
-
-       # decrement the headers by 1 and then re-set the
-       # chapter level only to H1...
-       #
-       for($cnt=5; $cnt >= 0; $cnt--) {
-           $j = $cnt + 1;
-           if( $cnt == 0 ) {
-               $j = 2;
-           }
-           $$buf =~ s/<H${cnt}/<H${j}/g;
-           $$buf =~ s/<\/H${cnt}/<\/H${j}/g;
-       }
-
-       my(@l) = split(/\n/, $$buf);
-       for( $cnt=0; $cnt < (@l + 0); $cnt++ ) {
-
-            if( $j == 1 ) {
-                if( $l[$cnt] =~ /<DIV/ ) {
-                    $j = 0;
-                    next;
-                }
-                $l[$cnt] =~ s/<H2/<H1/g;
-                $l[$cnt] =~ s/<\/H2/<\/H1/g;
-            }
-
-            if( $l[$cnt] =~ /^CLASS=\"CHAP/i
-                ||
-                $l[$cnt] =~ /^NAME=\"BIBL/i
-                ||
-                $l[$cnt] =~ /^CLASS=\"APPENDIX/i
-                ||
-                $l[$cnt] =~ /^CLASS=\"GLOSSARY/i
-                ||
-                $l[$cnt] =~ /^CLASS=\"PREF/i ) {
-                $j = 1;
-            }
-       }
-
-       $$buf = join("\n", @l);
-
-   }
-   $$buf =~ s/><DIV\nCLASS="\w+"\n//gms;
-   $$buf =~ s/><\/DIV\n//gms;
-
-   $buf =~ s/<SPAN\n[^>]*?>//gms;
-   $buf =~ s/<\/SPAN\n>//gms;
-
-   $$buf =~ s/(><LI\n)><P\n(.*?)<\/P\n>(<\/LI\n)/$1$2$3/gms;
-
-   return;
-}
-
-
-# Return true from package include
-#
-1;
-
diff --git a/external/privoxy/utils/ldp_print/ldp_print b/external/privoxy/utils/ldp_print/ldp_print
deleted file mode 100755
index 35b6053..0000000
--- a/external/privoxy/utils/ldp_print/ldp_print
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/usr/bin/perl -w
-#
-# usage: ldp_print <single_file.html>
-#
-# Creates a PDF variant of a single-file HTML representation of a
-# DocBook SGML (or XML) instance. This simple wrapper assumes that
-# the file was created using {open}jade in a manner similar to:
-#
-#	jade -t sgml -i html -V nochunks -d $style $fname > $fname.html
-#
-# Give this script the filename as an argument. It will then parse
-# the file into 'title.html' and 'body.html' and send each to
-# htmldoc (as the corresponding title page and body of the document).
-#
-#
-# CAVEATS:
-#
-# Assumes perl is in /usr/bin; adjust if necessary
-#
-# You may need to specify where the htmldoc executable resides.
-# The script assumes it's within your $PATH.
-#
-# If you want Postscript as an output variant, uncomment the 
-# appropriate lines (see below).
-#
-# Relies on output from a DocBook instance created via DSSSL/{open}jade!
-#
-# Cleans up (removes) the intermediate files it creates (but not the
-# PDF or Postscript files, obviously!)
-#
-# Works silently; PDF (PostScript) will be created in the same directory
-# as was specified for the input (single-file HTML) file.
-#
-# Provided without warranty or support!
-#
-#	gferg@xxxxxxx / Ferg (used as part of the LDP production env)
-#
-
-use strict;
-push(@INC, "./");
-require 'fix_print_html.lib';
-
-if( $ARGV[0] eq '' || !(-r $ARGV[0]) ) {
-    die "\nusage: ldp_print <single_file.html>\n\n";
-}
-
-my($fname_wo_ext) = $ARGV[0];
-$fname_wo_ext =~ s/\.[\w]+$//;
-
-
-# create new files from single HTML file to use for print
-#
-&fix_print_html($ARGV[0], 'body.html', 'title.html');
-
-my($cmd) = "htmldoc --size universal --bodyfont helvetica --fontsize 8 " .
-           "-t pdf -f ${fname_wo_ext}.pdf --firstpage p1 --titlefile title.html" .
-           " body.html --footer c.1";
-
-# For postscript output; append onto the above cmd string:
-#
-#          "; htmldoc --size universal -t ps -f ${fname_wo_ext}.ps " .
-#          "--firstpage p1 --titlefile title.html body.html";
-#
-system($cmd);
-die "\nldp_print: could not create ${fname_wo_ext}.pdf ($!)\n" if ($?);
-
-# cleanup
-#
-system("rm -f body.html title.html");
-
-exit(0);
-
diff --git a/external/privoxy/utils/prepare-configfile.pl b/external/privoxy/utils/prepare-configfile.pl
deleted file mode 100755
index e3b2b55..0000000
--- a/external/privoxy/utils/prepare-configfile.pl
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/usr/local/bin/perl
-
-use strict;
-use warnings;
-
-sub main() {
-    my $hit_header = 0;
-    my $hit_option = 0;
-    my $header_len;
-
-    while (<>) {
-        s/^1\. \@\@TITLE\@\@/     /i;
-
-        if (m/^(\d\.)(\d\.)(\d\.)?\s/) {
-            # Remove the first digit as it's the
-            # config file section in the User Manual.
-            s/^(\d\.)//;
-
-            # If it's a section header, uppercase it.
-            $_ = uc() if (/^\d\.\s+/);
-
-            # Remember to underline it.
-            $hit_header = 1;
-            $header_len = length($_);
-        }
-
-        s/^/#  /;
-
-        # XXX: someone should figure out what this stuff
-        # is supposed to do (and if it really does that).
-        s/^#  #/####/ if /^#  #{12,}/;
-        s/^.*$// if $hit_option;
-        $hit_option = 0;
-        s/^\n//;
-        s/^#\s*-{20,}//;
-        s/ *$//;
-        $hit_option = 1 if s/^#\s+@@//;
-    
-        print;
-
-        if ($hit_header) {
-            # The previous line was a section
-            # header so we better underline it.
-            die "Invalid header length" unless defined $header_len;
-            print "#  " . "=" x $header_len . "\n";
-            $hit_header = 0;
-        };
-    }
-}
-main();
diff --git a/external/privoxy/vc_config_pthreads.h b/external/privoxy/vc_config_pthreads.h
deleted file mode 100644
index 638f5bd..0000000
--- a/external/privoxy/vc_config_pthreads.h
+++ /dev/null
@@ -1,484 +0,0 @@
-#ifndef CONFIG_H_INCLUDED
-#define CONFIG_H_INCLUDED
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/vc_config_pthreads.h,v $
- *
- * Purpose     :  This file should be the first thing included in every
- *                .c file.  (Before even system headers).  It contains 
- *                #define statements for various features.  It was
- *                introduced because the compile command line started
- *                getting ludicrously long with feature defines.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: vc_config_pthreads.h,v $
- *    Revision 1.6  2008/03/27 18:27:38  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.5  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.3  2002/05/03 22:54:24  jongfoster
- *    Version number bump to 2.9.15
- *
- *    Revision 1.2  2002/04/26 18:26:09  jongfoster
- *    Bumping version numbers
- *
- *    Revision 1.1  2002/04/06 20:38:01  jongfoster
- *    Renaming VC++ versions of config.h
- *
- *    Revision 1.20  2002/04/03 22:28:03  gliptak
- *    Removed references to gnu_regex
- *
- *    Revision 1.19  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.18  2002/03/24 17:08:12  jongfoster
- *    Version number bump
- *
- *    Revision 1.17  2002/03/24 13:33:26  swa
- *    name change related issues
- *
- *    Revision 1.16  2002/03/16 14:27:22  jongfoster
- *    Ignoring a very common warning.
- *
- *    Revision 1.15  2002/03/13 00:28:32  jongfoster
- *    Hiding all the warnings generated by #include<windows.h>
- *
- *    Revision 1.14  2001/11/30 21:35:54  jongfoster
- *    Bumping version number to 2.9.10
- *
- *    Revision 1.13  2001/10/23 21:24:09  jongfoster
- *    Support for FEATURE_CGI_EDIT_ACTIONS
- *
- *    Revision 1.12  2001/10/07 15:33:14  oes
- *    Removed FEATURE_DENY_GZIP
- *    Bumped up version number
- *
- *    Revision 1.11  2001/09/16 16:59:34  jongfoster
- *    Bugfix - couldn't build resources with previous version.
- *
- *    Revision 1.10  2001/09/16 16:19:02  jongfoster
- *    New version based on latest configure.in and acconfig.h
- *
- *    Revision 1.9  2001/07/30 22:16:07  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.8  2001/07/25 19:16:27  oes
- *    Bumping version number to 2.9.8
- *
- *    Revision 1.7  2001/07/21 18:00:07  jongfoster
- *    Bumping version number to 2.9.7
- *
- *    Revision 1.6  2001/07/15 20:08:40  jongfoster
- *    New build files for VC++ which provide the option of POSIX
- *    or Win32 threads.
- *
- *    Revision 1.5  2001/07/15 18:00:46  jongfoster
- *    Renaming STATIC to STATIC_PCRE.
- *    Replacing this file with one built by "configure" from
- *    "config.h.in", for consistency.
- *
- *    Revision 1.6  2001/07/15 17:54:29  jongfoster
- *    Renaming #define STATIC to STATIC_PCRE
- *    Adding new #define FEATURE_PTHREAD that will be used to enable
- *    POSIX threads support.
- *
- *    Revision 1.5  2001/07/13 13:48:37  oes
- *     - (Fix:) Copied CODE_STATUS #define from config.h.in
- *     - split REGEX #define into REGEX_GNU and REGEX_PCRE
- *       and removed PCRE.
- *       (REGEX = REGEX_GNU || REGEX_PCRE per project.h)
- *     - Moved STATIC (for pcre) here from Makefile.in
- *     - Introduced STATIC_PCRS #define to allow for dynaimc linking with
- *       libpcrs
- *     - Removed PCRS #define, since pcrs is now needed for CGI anyway
- *
- *    Revision 1.4  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.3  2001/05/26 01:26:34  jongfoster
- *    New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor.
- *    This #define cannot be set from ./configure - there's no point, it
- *    doesn't work yet.  See feature request # 425722
- *
- *    Revision 1.2  2001/05/22 17:43:35  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Many minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:45  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-/*
- * Version number - Major (X._._)
- */
-#define VERSION_MAJOR 2
-
-/*
- * Version number - Minor (_.X._)
- */
-#define VERSION_MINOR 9
-
-/*
- * Version number - Point (_._.X)
- */
-#define VERSION_POINT 15
-
-/*
- * Version number, as a string
- */
-#define VERSION "2.9.15"
-
-/*
- * Status of the code: alpha, beta or stable
- */
-#define CODE_STATUS "beta"
-
-/*
- * Regular expression matching for URLs.  (Highly recommended).
- * If neither of these are defined then you can ony use prefix matching.
- * Don't bother to change this here! Use configure instead.
- */
-#define REGEX_PCRE 1
-
-/* 
- * Should pcre be statically built in instead of linkling with libpcre?
- * (This is determined by configure depending on the availiability of
- * libpcre and user preferences). The name is ugly, but pcre needs it.
- * Don't bother to change this here! Use configure instead.
- */
-#define STATIC_PCRE 1
-
-/* 
- * Should pcrs be statically built in instead of linkling with libpcrs?
- * (This is determined by configure depending on the availiability of
- * libpcrs and user preferences).
- * Don't bother to change this here! Use configure instead.
- */
-#define STATIC_PCRS 1
-
-/*
- * Allows the use of an ACL to control access to the proxy by IP address.
- */
-#define FEATURE_ACL 1
-
-/*
- * Enables the web-based configuration (actionsfile) editor.  If you
- * have a shared proxy, you might want to turn this off.
- */
-#define FEATURE_CGI_EDIT_ACTIONS 1
-
-/*
- * Allows the use of jar files to capture cookies.
- */
-#define FEATURE_COOKIE_JAR 1
-
-/*
- * Locally redirect remote script-redirect URLs
- */
-#define FEATURE_FAST_REDIRECTS 1
-
-/*
- * Bypass filtering for 1 page only
- */
-#define FEATURE_FORCE_LOAD 1
-
-/*
- * Allow blocking using images as well as HTML.
- * If you do not define this then everything is blocked as HTML.
- *
- * Note that this is required if you want to use FEATURE_IMAGE_DETECT_MSIE.
- */
-#define FEATURE_IMAGE_BLOCKING 1
-
-/*
- * Detect image requests automatically for MSIE.  Will fall back to
- * other image-detection methods (i.e. "+image" permission) for other
- * browsers.
- *
- * You must also define FEATURE_IMAGE_BLOCKING to use this feature.
- *
- * It detects the following header pair as an image request:
- *
- * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
- * Accept: * / *
- *
- * And the following as a HTML request:
- *
- * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
- * Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * / *
- *
- * And no, I haven't got that backwards - IE is being wierd.
- *
- * Known limitations: 
- * 1) If you press shift-reload on a blocked HTML page, you get
- *    the image "blocked" page, not the HTML "blocked" page.
- * 2) Once an image "blocked" page has been sent, viewing it 
- *    in it's own browser window *should* bring up the HTML
- *    "blocked" page, but it doesn't.  You need to clear the 
- *    browser cache to get the HTML version again.
- *
- * These limitations are due to IE making inconsistent choices
- * about which "Accept:" header to send.
- */
-#define FEATURE_IMAGE_DETECT_MSIE 1
-
-/*
- * Use POSIX threads instead of native threads.
- */
-#define FEATURE_PTHREAD 1
-
-/*
- * Enables statistics function.
- */
-#define FEATURE_STATISTICS 1
-
-/*
- * Allow JunkBuster to be "disabled" so it is just a normal non-blocking
- * non-anonymizing proxy.  This is useful if you're trying to access a
- * blocked or broken site - just change the setting in the config file,
- * or use the handy "Disable" menu option in the Windows GUI.
- */
-#define FEATURE_TOGGLE 1
-
-/*
- * Allows the use of trust files.
- */
-#define FEATURE_TRUST 1
-
-
-/****************************************************************************
- * The following values are correct for MS VC++97.
- * You should normally not change them.
- ***************************************************************************/
-
-
-/*
- * Defined on Solaris only.  Makes the system libraries thread safe.
- */
-/* #define _REENTRANT 1 */
-
-/*
- * Defined on Solaris only.  Without this, many important functions are not
- * defined in the system headers.
- */
-/* #define __EXTENSIONS__ 1 */
-
-/*
- * Defined always.
- * FIXME: Don't know what it does or why we need it.
- * (presumably something to do with MultiThreading?)
- */
-#define __MT__ 1
-
-
-/* Define if you have the `bcopy' function. */
-/* #define HAVE_BCOPY 1 */
-
-/* Define if you have the <inttypes.h> header file. */
-/* #define HAVE_INTTYPES_H 1 */
-
-/* Define if you have the `memmove' function. */
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define if you have the <stdint.h> header file. */
-/* #define HAVE_STDINT_H 1 */
-
-/* Define if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define if you have the `strerror' function. */
-#define HAVE_STRERROR 1
-
-/* Define if you have the <strings.h> header file. */
-/* #define HAVE_STRINGS_H 1 */
-
-/* Define if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define if you have the <unistd.h> header file. */
-/* #define HAVE_UNISTD_H 1 */
-
-/* The size of a `char *', as computed by sizeof. */
-#define SIZEOF_CHAR_P 4
-
-/* The size of a `int', as computed by sizeof. */
-#define SIZEOF_INT 4
-
-/* The size of a `long', as computed by sizeof. */
-#define SIZEOF_LONG 4
-
-/* The size of a `long long', as computed by sizeof. */
-/* #define SIZEOF_LONG_LONG ---not supported--- */
-
-/* The size of a `size_t', as computed by sizeof. */
-#define SIZEOF_SIZE_T 4
-
-/* Define if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #define const */
-
-/* Define to `unsigned' if <sys/types.h> does not define. */
-/* #define size_t unsigned */
-
-/*
- * Defined always.
- * FIXME: Don't know what it does or why we need it.
- * (presumably something to do with ANSI Standard C?)
- */
-/* Don't define for MS VC++ or you don't get strdup() declared.
-#ifndef __STDC__
-#define __STDC__ 1
-#endif
-*/
-
-/*
- * Need to set up this define only for the Pthreads library for
- * Win32, available from http://sources.redhat.com/pthreads-win32/
- */
-#if defined(FEATURE_PTHREAD) && defined(_WIN32)
-#define __CLEANUP_C
-#endif /* defined(FEATURE_PTHREAD) && defined(_WIN32) */
-
-/*
- * BEOS does not currently support POSIX threads.
- * This *should* be detected by ./configure, but let's be sure.
- */
-#if defined(FEATURE_PTHREAD) && defined(__BEOS__)
-#error BEOS does not support pthread - please run ./configure again with "--disable-pthread"
-
-#endif /* defined(FEATURE_PTHREAD) && defined(__BEOS__) */
-
-
-#if (!defined(_MSC_VER)) && (!defined(RC_INVOKED))
-#error This file is only intended for MS VC++ on Win32.  For other compilers, please run configure.
-#endif /* (!defined(_MSC_VER)) && (!defined(RC_INVOKED)) */
-
-#pragma warning ( disable: 4100 4115 4201 4214 4244 4514 )
-
-/*
- * C4100 : unreferenced formal parameter
- * Very common, not a bug
- * 
- * C4115 : named type definition in parentheses
- * #include <windows.h> causes a warning about one of these.
- *
- * C4201 : nonstandard extension used : nameless struct/union
- * Endemic in <windows.h>
- *
- * C4214 nonstandard extension used : bit field types other than int
- * Endemic in <windows.h>
- *
- * C4244 conversion from 'int' to 'char', possible loss of data
- * Should really fix this one.  Throughout the JB code.
- *
- * C4514 unreferenced inline/local function has been removed
- * Caused by #include <windows.h>
- */
-
-#endif /* CONFIG_H_INCLUDED */
-
diff --git a/external/privoxy/vc_config_winthreads.h b/external/privoxy/vc_config_winthreads.h
deleted file mode 100644
index ca863a9..0000000
--- a/external/privoxy/vc_config_winthreads.h
+++ /dev/null
@@ -1,675 +0,0 @@
-#ifndef CONFIG_H_INCLUDED
-#define CONFIG_H_INCLUDED
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/vc_config_winthreads.h,v $
- *
- * Purpose     :  This file should be the first thing included in every
- *                .c file.  (Before even system headers).  It contains 
- *                #define statements for various features.  It was
- *                introduced because the compile command line started
- *                getting ludicrously long with feature defines.
- *
- * Copyright   :  Written by and Copyright (C) 2001 the SourceForge
- *                Privoxy team. http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: vc_config_winthreads.h,v $
- *    Revision 1.6  2008/03/27 18:27:39  fabiankeil
- *    Remove kill-popups action.
- *
- *    Revision 1.5  2006/07/18 14:48:47  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.3.2.1  2006/04/08 21:57:26  david__schmidt
- *    Synchronize with a more modern copy of config.h.
- *
- *    Revision 1.3  2002/05/03 22:54:24  jongfoster
- *    Version number bump to 2.9.15
- *
- *    Revision 1.2  2002/04/26 18:26:09  jongfoster
- *    Bumping version numbers
- *
- *    Revision 1.1  2002/04/06 20:38:01  jongfoster
- *    Renaming VC++ versions of config.h
- *
- *    Revision 1.14  2002/03/26 22:29:54  swa
- *    we have a new homepage!
- *
- *    Revision 1.13  2002/03/24 17:08:12  jongfoster
- *    Version number bump
- *
- *    Revision 1.12  2002/03/24 13:25:43  swa
- *    name change related issues
- *
- *    Revision 1.11  2002/03/16 14:27:22  jongfoster
- *    Ignoring a very common warning.
- *
- *    Revision 1.10  2002/03/13 00:28:32  jongfoster
- *    Hiding all the warnings generated by #include<windows.h>
- *
- *    Revision 1.9  2001/11/30 21:35:54  jongfoster
- *    Bumping version number to 2.9.10
- *
- *    Revision 1.8  2001/10/23 21:24:09  jongfoster
- *    Support for FEATURE_CGI_EDIT_ACTIONS
- *
- *    Revision 1.7  2001/10/07 15:33:14  oes
- *    Removed FEATURE_DENY_GZIP
- *    Bumped up version number
- *
- *    Revision 1.6  2001/09/16 16:59:34  jongfoster
- *    Bugfix - couldn't build resources with previous version.
- *
- *    Revision 1.5  2001/09/16 16:19:02  jongfoster
- *    New version based on latest configure.in and acconfig.h
- *
- *    Revision 1.9  2001/07/30 22:16:07  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.8  2001/07/25 19:16:27  oes
- *    Bumping version number to 2.9.8
- *
- *    Revision 1.7  2001/07/21 18:00:07  jongfoster
- *    Bumping version number to 2.9.7
- *
- *    Revision 1.6  2001/07/15 20:08:40  jongfoster
- *    New build files for VC++ which provide the option of POSIX
- *    or Win32 threads.
- *
- *    Revision 1.5  2001/07/15 18:00:46  jongfoster
- *    Renaming STATIC to STATIC_PCRE.
- *    Replacing this file with one built by "configure" from
- *    "config.h.in", for consistency.
- *
- *    Revision 1.6  2001/07/15 17:54:29  jongfoster
- *    Renaming #define STATIC to STATIC_PCRE
- *    Adding new #define FEATURE_PTHREAD that will be used to enable
- *    POSIX threads support.
- *
- *    Revision 1.5  2001/07/13 13:48:37  oes
- *     - (Fix:) Copied CODE_STATUS #define from config.h.in
- *     - split REGEX #define into REGEX_GNU and REGEX_PCRE
- *       and removed PCRE.
- *       (REGEX = REGEX_GNU || REGEX_PCRE per project.h)
- *     - Moved STATIC (for pcre) here from Makefile.in
- *     - Introduced STATIC_PCRS #define to allow for dynaimc linking with
- *       libpcrs
- *     - Removed PCRS #define, since pcrs is now needed for CGI anyway
- *
- *    Revision 1.4  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.3  2001/05/26 01:26:34  jongfoster
- *    New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor.
- *    This #define cannot be set from ./configure - there's no point, it
- *    doesn't work yet.  See feature request # 425722
- *
- *    Revision 1.2  2001/05/22 17:43:35  oes
- *
- *    - Enabled filtering banners by size rather than URL
- *      by adding patterns that replace all standard banner
- *      sizes with the "Junkbuster" gif to the re_filterfile
- *
- *    - Enabled filtering WebBugs by providing a pattern
- *      which kills all 1x1 images
- *
- *    - Added support for PCRE_UNGREEDY behaviour to pcrs,
- *      which is selected by the (nonstandard and therefore
- *      capital) letter 'U' in the option string.
- *      It causes the quantifiers to be ungreedy by default.
- *      Appending a ? turns back to greedy (!).
- *
- *    - Added a new interceptor ijb-send-banner, which
- *      sends back the "Junkbuster" gif. Without imagelist or
- *      MSIE detection support, or if tinygif = 1, or the
- *      URL isn't recognized as an imageurl, a lame HTML
- *      explanation is sent instead.
- *
- *    - Added new feature, which permits blocking remote
- *      script redirects and firing back a local redirect
- *      to the browser.
- *      The feature is conditionally compiled, i.e. it
- *      can be disabled with --disable-fast-redirects,
- *      plus it must be activated by a "fast-redirects"
- *      line in the config file, has its own log level
- *      and of course wants to be displayed by show-proxy-args
- *      Note: Boy, all the #ifdefs in 1001 locations and
- *      all the fumbling with configure.in and acconfig.h
- *      were *way* more work than the feature itself :-(
- *
- *    - Because a generic redirect template was needed for
- *      this, tinygif = 3 now uses the same.
- *
- *    - Moved GIFs, and other static HTTP response templates
- *      to project.h
- *
- *    - Many minor fixes
- *
- *    - Removed some >400 CRs again (Jon, you really worked
- *      a lot! ;-)
- *
- *    Revision 1.1.1.1  2001/05/15 13:58:45  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-/*
- * Version number - Major (X._._)
- */
-#define VERSION_MAJOR 0
-
-/*
- * Version number - Minor (_.X._)
- */
-#define VERSION_MINOR 0
-
-/*
- * Version number - Point (_._.X)
- */
-#define VERSION_POINT 0
-
-/*
- * Version number, as a string
- */
-#define VERSION "0.0.0"
-
-/*
- * Status of the code: alpha, beta or stable
- */
-#define CODE_STATUS "UNRELEASED"
-
-/*
- * Regular expression matching for URLs.  (Highly recommended).
- * If neither of these are defined then you can ony use prefix matching.
- * Don't bother to change this here! Use configure instead.
- */
-/* #define REGEX_GNU 1 */
-#define REGEX_PCRE 1
-
-/* 
- * Should pcre be statically built in instead of linkling with libpcre?
- * (This is determined by configure depending on the availiability of
- * libpcre and user preferences). The name is ugly, but pcre needs it.
- * Don't bother to change this here! Use configure instead.
- */
-#define STATIC_PCRE 1
-
-/* 
- * Should pcrs be statically built in instead of linkling with libpcrs?
- * (This is determined by configure depending on the availiability of
- * libpcrs and user preferences).
- * Don't bother to change this here! Use configure instead.
- */
-#define STATIC_PCRS 1
-
-/*
- * Allows the use of an ACL to control access to the proxy by IP address.
- */
-#define FEATURE_ACL 1
-
-/*
- * Enables the web-based configuration (actionsfile) editor.  If you
- * have a shared proxy, you might want to turn this off.
- */
-#define FEATURE_CGI_EDIT_ACTIONS 1
-
-/*
- * Allows the use of jar files to capture cookies.
- */
-#define FEATURE_COOKIE_JAR 1
-
-/*
- * Locally redirect remote script-redirect URLs
- */
-#define FEATURE_FAST_REDIRECTS 1
-
-/*
- * Bypass filtering for 1 page only
- */
-#define FEATURE_FORCE_LOAD 1
-
-/*
- * Allow blocking using images as well as HTML.
- * If you do not define this then everything is blocked as HTML.
- *
- * Note that this is required if you want to use FEATURE_IMAGE_DETECT_MSIE.
- */
-#define FEATURE_IMAGE_BLOCKING 1
-
-/*
- * Detect image requests automatically for MSIE.  Will fall back to
- * other image-detection methods (i.e. "+image" permission) for other
- * browsers.
- *
- * You must also define FEATURE_IMAGE_BLOCKING to use this feature.
- *
- * It detects the following header pair as an image request:
- *
- * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
- * Accept: * / *
- *
- * And the following as a HTML request:
- *
- * User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 5.0)
- * Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * / *
- *
- * And no, I haven't got that backwards - IE is being wierd.
- *
- * Known limitations: 
- * 1) If you press shift-reload on a blocked HTML page, you get
- *    the image "blocked" page, not the HTML "blocked" page.
- * 2) Once an image "blocked" page has been sent, viewing it 
- *    in it's own browser window *should* bring up the HTML
- *    "blocked" page, but it doesn't.  You need to clear the 
- *    browser cache to get the HTML version again.
- *
- * These limitations are due to IE making inconsistent choices
- * about which "Accept:" header to send.
- */
-#define FEATURE_IMAGE_DETECT_MSIE 1
-
-/*
- * Use PNG instead of GIF for built-in images
- */
-/* #undef FEATURE_NO_GIFS */
-
-/*
- * Use POSIX threads instead of native threads.
- */
-/* #define FEATURE_PTHREAD 1 */
-
-/*
- * Enables statistics function.
- */
-#define FEATURE_STATISTICS 1
-
-/*
- * Allow JunkBuster to be "disabled" so it is just a normal non-blocking
- * non-anonymizing proxy.  This is useful if you're trying to access a
- * blocked or broken site - just change the setting in the config file,
- * or use the handy "Disable" menu option in the Windows GUI.
- */
-#define FEATURE_TOGGLE 1
-
-/*
- * Allows the use of trust files.
- */
-#define FEATURE_TRUST 1
-
-
-/****************************************************************************
- * The following values are correct for MS VC++97.
- * You should normally not change them.
- ***************************************************************************/
-
-
-/*
- * Defined on Solaris only.  Makes the system libraries thread safe.
- */
-/* #define _REENTRANT 1 */
-
-/*
- * Defined on Solaris only.  Without this, many important functions are not
- * defined in the system headers.
- */
-/* #define __EXTENSIONS__ 1 */
-
-/*
- * Defined always.
- * FIXME: Don't know what it does or why we need it.
- * (presumably something to do with MultiThreading?)
- */
-#define __MT__ 1
-
-/* If the (nonstandard and thread-safe) function gethostbyname_r
- * is available, select which signature to use
- */
-/* #undef HAVE_GETHOSTBYNAME_R_6_ARGS */
-/* #undef HAVE_GETHOSTBYNAME_R_5_ARGS */
-/* #undef HAVE_GETHOSTBYNAME_R_3_ARGS */
-
-/* If the (nonstandard and thread-safe) function gethostbyaddr_r
- * is available, select which signature to use
- */
-/* #undef HAVE_GETHOSTBYADDR_R_8_ARGS */
-/* #undef HAVE_GETHOSTBYADDR_R_7_ARGS */
-/* #undef HAVE_GETHOSTBYADDR_R_5_ARGS */
-
-/* Defined if you have gmtime_r and localtime_r with a signature
- * of (struct time *, struct tm *)
- */
-#undef HAVE_GMTIME_R
-
-/* #define HAVE_LOCALTIME_R 1 */
-
-/* Define to 'int' if <sys/socket.h> doesn't have it.
- */
-#define socklen_t int
-
-/* Define if pcre.h must be included as <pcre/pcre.h>
- */
-/* #undef PCRE_H_IN_SUBDIR */
-
-/* Define if pcreposix.h must be included as <pcre/pcreposix.h>
- */
-/* #undef PCREPOSIX_H_IN_SUBDIR */
-
-
-/* Define to 1 if you have the <arpa/inet.h> header file. */
-#define HAVE_ARPA_INET_H 1
-
-/* Define to 1 if you have the `atexit' function. */
-#define HAVE_ATEXIT 1
-
-/* Define if you have the `bcopy' function. */
-/* #define HAVE_BCOPY 1 */
-
-/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
-   */
-#define HAVE_DIRENT_H 1
-
-/* Define to 1 if you have the <errno.h> header file. */
-#define HAVE_ERRNO_H 1
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#define HAVE_FCNTL_H 1
-
-/* Define to 1 if you have the `getcwd' function. */
-#define HAVE_GETCWD 1
-
-/* Define to 1 if you have the `gethostbyaddr' function. */
-#define HAVE_GETHOSTBYADDR 1
-
-/* Define to 1 if you have the `gethostbyname' function. */
-#define HAVE_GETHOSTBYNAME 1
-
-/* Define to 1 if you have the `inet_ntoa' function. */
-#define HAVE_INET_NTOA 1
-
-/* Define if you have the <inttypes.h> header file. */
-/* #define HAVE_INTTYPES_H 1 */
-
-/* Define to 1 if you have the `nsl' library (-lnsl). */
-/* #undef HAVE_LIBNSL */
-
-/* Define to 1 if you have the <limits.h> header file. */
-#define HAVE_LIMITS_H 1
-
-/* Define to 1 if you have the <locale.h> header file. */
-#define HAVE_LOCALE_H 1
-
-/* Define to 1 if you have the `localtime_r' function. */
-#undef HAVE_LOCALTIME_R
-
-/* Define to 1 if you have the `memchr' function. */
-#define HAVE_MEMCHR 1
-
-/* Define if you have the `memmove' function. */
-#define HAVE_MEMMOVE 1
-
-/* Define if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define to 1 if you have the `memset' function. */
-#define HAVE_MEMSET 1
-
-/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
-/* #undef HAVE_NDIR_H */
-
-/* Define to 1 if you have the <netdb.h> header file. */
-#define HAVE_NETDB_H 1
-
-/* Define to 1 if you have the <netinet/in.h> header file. */
-#define HAVE_NETINET_IN_H 1
-
-/* Define to 1 if you have the <OS.h> header file. */
-/* #undef HAVE_OS_H */
-
-/* Define to 1 if you have the `regcomp' function. */
-#define HAVE_REGCOMP 1
-
-/* Define to 1 if you have the `select' function. */
-#define HAVE_SELECT 1
-
-/* Define to 1 if you have the `setlocale' function. */
-#define HAVE_SETLOCALE 1
-
-/* Define to 1 if you have the `socket' function. */
-#define HAVE_SOCKET 1
-
-/* Define to 1 if you have the <stddef.h> header file. */
-#define HAVE_STDDEF_H 1
-
-/* Define if you have the <stdint.h> header file. */
-/* #define HAVE_STDINT_H 1 */
-
-/* Define if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the `strchr' function. */
-#define HAVE_STRCHR 1
-
-/* Define to 1 if you have the `strdup' function. */
-#define HAVE_STRDUP 1
-
-/* Define if you have the `strerror' function. */
-#define HAVE_STRERROR 1
-
-/* Define to 1 if you have the `strftime' function. */
-#define HAVE_STRFTIME 1
-
-/* Define if you have the <strings.h> header file. */
-/* #define HAVE_STRINGS_H 1 */
-
-/* Define if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the `strstr' function. */
-#define HAVE_STRSTR 1
-
-/* Define to 1 if you have the `strtoul' function. */
-#define HAVE_STRTOUL 1
-
-/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
-   */
-/* #undef HAVE_SYS_DIR_H */
-
-/* Define to 1 if you have the <sys/ioctl.h> header file. */
-#define HAVE_SYS_IOCTL_H 1
-
-/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
-   */
-/* #undef HAVE_SYS_NDIR_H */
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#define HAVE_SYS_SOCKET_H 1
-
-/* Define if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/timeb.h> header file. */
-#define HAVE_SYS_TIMEB_H 1
-
-/* Define to 1 if you have the <sys/time.h> header file. */
-#define HAVE_SYS_TIME_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have the <sys/wait.h> header file. */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define if you have the <unistd.h> header file. */
-/* #define HAVE_UNISTD_H 1 */
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT ""
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME ""
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING ""
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME ""
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION ""
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#define RETSIGTYPE void
-
-/* Define to 1 if the `setpgrp' function takes no argument. */
-#define SETPGRP_VOID 1
-
-/* The size of a `char *', as computed by sizeof. */
-#define SIZEOF_CHAR_P 4
-
-/* The size of a `int', as computed by sizeof. */
-#define SIZEOF_INT 4
-
-/* The size of a `long', as computed by sizeof. */
-#define SIZEOF_LONG 4
-
-/* The size of a `long long', as computed by sizeof. */
-/* #define SIZEOF_LONG_LONG ---not supported--- */
-
-/* The size of a `size_t', as computed by sizeof. */
-#define SIZEOF_SIZE_T 4
-
-/* Define if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define to 1 if your <sys/time.h> declares `struct tm'. */
-/* #undef TM_IN_SYS_TIME */
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #define const */
-
-/* Define to `int' if <sys/types.h> does not define. */
-/* #undef pid_t */
-
-/* Define to `unsigned' if <sys/types.h> does not define. */
-/* #define size_t unsigned */
-
-/* Define to 'int' if <sys/socket.h> doesn't have it. */
-#define socklen_t int
-
-/*
- * Defined always.
- * FIXME: Don't know what it does or why we need it.
- * (presumably something to do with ANSI Standard C?)
- */
-/* Don't define for MS VC++ or you don't get strdup() declared.
-#ifndef __STDC__
-#define __STDC__ 1
-#endif
-*/
-
-/*
- * Need to set up this define only for the Pthreads library for
- * Win32, available from http://sources.redhat.com/pthreads-win32/
- */
-#if defined(FEATURE_PTHREAD) && defined(_WIN32)
-#define __CLEANUP_C
-#endif /* defined(FEATURE_PTHREAD) && defined(_WIN32) */
-
-/*
- * Need to keep errlog.c from trying to inline the non-existent
- * locking stubs.  Could be removed once a real platform-specific
- * solution is generated.
- */
-#define inline ""
-
-/*
- * BEOS does not currently support POSIX threads.
- * This *should* be detected by ./configure, but let's be sure.
- */
-#if defined(FEATURE_PTHREAD) && defined(__BEOS__)
-#error BEOS does not support pthread - please run ./configure again with "--disable-pthread"
-
-#endif /* defined(FEATURE_PTHREAD) && defined(__BEOS__) */
-
-
-#if (!defined(_MSC_VER)) && (!defined(RC_INVOKED))
-#error This file is only intended for MS VC++ on Win32.  For other compilers, please run configure.
-#endif /* (!defined(_MSC_VER)) && (!defined(RC_INVOKED)) */
-
-#pragma warning ( disable: 4100 4115 4201 4214 4244 4514 )
-
-/*
- * C4100 : unreferenced formal parameter
- * Very common, not a bug
- * 
- * C4115 : named type definition in parentheses
- * #include <windows.h> causes a warning about one of these.
- *
- * C4201 : nonstandard extension used : nameless struct/union
- * Endemic in <windows.h>
- *
- * C4214 nonstandard extension used : bit field types other than int
- * Endemic in <windows.h>
- *
- * C4244 conversion from 'int' to 'char', possible loss of data
- * Should really fix this one.  Throughout the JB code.
- *
- * C4514 unreferenced inline/local function has been removed
- * Caused by #include <windows.h>
- */
-
-
-#endif /* CONFIG_H_INCLUDED */
-
diff --git a/external/privoxy/vc_console.dsp b/external/privoxy/vc_console.dsp
deleted file mode 100644
index 3561b5e..0000000
--- a/external/privoxy/vc_console.dsp
+++ /dev/null
@@ -1,405 +0,0 @@
-# Microsoft Developer Studio Project File - Name="vc_console" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 5.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=vc_console - Win32 Debug with Win32 threads
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "vc_console.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "vc_console.mak"\
- CFG="vc_console - Win32 Debug with Win32 threads"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "vc_console - Win32 Release" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE "vc_console - Win32 Debug" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE "vc_console - Win32 Debug with Win32 threads" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE "vc_console - Win32 Release with Win32 threads" (based on\
- "Win32 (x86) Console Application")
-!MESSAGE 
-
-# Begin Project
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "vc_console - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "console_release"
-# PROP Intermediate_Dir "console_release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "vc_console - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "console_debug"
-# PROP Intermediate_Dir "console_debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /FR /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "vc_console - Win32 Debug with Win32 threads"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "console_"
-# PROP BASE Intermediate_Dir "console_"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "console_debug_winthr"
-# PROP Intermediate_Dir "console_debug_winthr"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /FR /YX /FD /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /FR /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "vc_console - Win32 Release with Win32 threads"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "console0"
-# PROP BASE Intermediate_Dir "console0"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "console_release_winthr"
-# PROP Intermediate_Dir "console_release_winthr"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "_WIN_CONSOLE" /D "STATIC" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:console /machine:I386
-
-!ENDIF 
-
-# Begin Target
-
-# Name "vc_console - Win32 Release"
-# Name "vc_console - Win32 Debug"
-# Name "vc_console - Win32 Debug with Win32 threads"
-# Name "vc_console - Win32 Release with Win32 threads"
-# Begin Group "JunkBuster"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\actionlist.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\actions.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\actions.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgi.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgi.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgiedit.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgiedit.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgisimple.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgisimple.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\config.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\deanimate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\deanimate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\errlog.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\errlog.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\filters.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\filters.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\jcc.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\jcc.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\loadcfg.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\loadcfg.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\loaders.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\loaders.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\parsers.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\parsers.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\project.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\urlmatch.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\urlmatch.h
-# End Source File
-# End Group
-# Begin Group "Win32"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\cygwin.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\win32.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\win32.h
-# End Source File
-# End Group
-# Begin Group "PCRE"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\pcre\chartables.c
-
-!IF  "$(CFG)" == "vc_console - Win32 Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_console - Win32 Debug"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_console - Win32 Debug with Win32 threads"
-
-# PROP BASE Exclude_From_Build 1
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_console - Win32 Release with Win32 threads"
-
-# PROP BASE Exclude_From_Build 1
-# PROP Exclude_From_Build 1
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\config.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\get.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\internal.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\maketables.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcre.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcre.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcreposix.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcreposix.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\study.c
-# End Source File
-# End Group
-# Begin Group "PCRS"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\pcrs.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcrs.h
-# End Source File
-# End Group
-# Begin Group "Sockets"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\gateway.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\gateway.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\jbsockets.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\jbsockets.h
-# End Source File
-# End Group
-# Begin Group "Utilities"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\encode.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\encode.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\list.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\list.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\miscutil.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\miscutil.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\ssplit.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\ssplit.h
-# End Source File
-# End Group
-# End Target
-# End Project
diff --git a/external/privoxy/vc_privoxy.dsp b/external/privoxy/vc_privoxy.dsp
deleted file mode 100644
index 5afaec9..0000000
--- a/external/privoxy/vc_privoxy.dsp
+++ /dev/null
@@ -1,488 +0,0 @@
-# Microsoft Developer Studio Project File - Name="vc_privoxy" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 5.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Application" 0x0101
-
-CFG=vc_privoxy - Win32 Debug with Win32 threads
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "vc_privoxy.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "vc_privoxy.mak"\
- CFG="vc_privoxy - Win32 Debug with Win32 threads"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "vc_privoxy - Win32 Release" (based on "Win32 (x86) Application")
-!MESSAGE "vc_privoxy - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE "vc_privoxy - Win32 Release with Win32 threads" (based on\
- "Win32 (x86) Application")
-!MESSAGE "vc_privoxy - Win32 Debug with Win32 threads" (based on\
- "Win32 (x86) Application")
-!MESSAGE 
-
-# Begin Project
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-MTL=midl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "vc_privoxy - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "vc_release"
-# PROP BASE Intermediate_Dir "vc_release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "vc_release"
-# PROP Intermediate_Dir "vc_release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /machine:I386
-
-!ELSEIF  "$(CFG)" == "vc_privoxy - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "vc_debug"
-# PROP BASE Intermediate_Dir "vc_debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "vc_debug"
-# PROP Intermediate_Dir "vc_debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /FD /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "vc_privoxy - Win32 Release with Win32 threads"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "vc_junkb"
-# PROP BASE Intermediate_Dir "vc_junkb"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "vc_release_winthr"
-# PROP Intermediate_Dir "vc_release_winthr"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /Ob2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /I "pcre" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /o NUL /win32
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:windows /machine:I386
-
-!ELSEIF  "$(CFG)" == "vc_privoxy - Win32 Debug with Win32 threads"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "vc_junk0"
-# PROP BASE Intermediate_Dir "vc_junk0"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "vc_debug_winthr"
-# PROP Intermediate_Dir "vc_debug_winthr"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /O2 /I "pcre" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "STATIC" /YX /FD /c
-# ADD CPP /nologo /MTd /W4 /Gm /GX /Zi /Od /I "pcre" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "STATIC" /FR /YX /FD /c
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /o NUL /win32
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib pthreadVC.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib ws2_32.lib comctl32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-
-!ENDIF 
-
-# Begin Target
-
-# Name "vc_privoxy - Win32 Release"
-# Name "vc_privoxy - Win32 Debug"
-# Name "vc_privoxy - Win32 Release with Win32 threads"
-# Name "vc_privoxy - Win32 Debug with Win32 threads"
-# Begin Group "JunkBuster"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\actionlist.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\actions.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\actions.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgi.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgi.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgiedit.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgiedit.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgisimple.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\cgisimple.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\config.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\deanimate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\deanimate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\errlog.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\errlog.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\filters.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\filters.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\jcc.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\jcc.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\loadcfg.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\loadcfg.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\loaders.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\loaders.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\parsers.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\parsers.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\project.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\urlmatch.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\urlmatch.h
-# End Source File
-# End Group
-# Begin Group "Win32"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\cygwin.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32log.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32log.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32res.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32taskbar.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32taskbar.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\win32.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\win32.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32svrapi.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32svrapi.h
-# End Source File
-# End Group
-# Begin Group "Resources"
-
-# PROP Default_Filter "rc,ico,bmp"
-# Begin Source File
-
-SOURCE=.\icons\ico00001.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00002.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00003.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00004.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00005.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00006.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00007.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\ico00008.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\idle.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\icons\privoxy.ico
-# End Source File
-# Begin Source File
-
-SOURCE=.\w32.rc
-# End Source File
-# End Group
-# Begin Group "PCRE"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\pcre\chartables.c
-
-!IF  "$(CFG)" == "vc_privoxy - Win32 Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_privoxy - Win32 Debug"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_privoxy - Win32 Release with Win32 threads"
-
-# PROP BASE Exclude_From_Build 1
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "vc_privoxy - Win32 Debug with Win32 threads"
-
-# PROP BASE Exclude_From_Build 1
-# PROP Exclude_From_Build 1
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\config.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\get.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\internal.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\maketables.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcre.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcre.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcreposix.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\pcreposix.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcre\study.c
-# End Source File
-# End Group
-# Begin Group "PCRS"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\pcrs.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\pcrs.h
-# End Source File
-# End Group
-# Begin Group "Sockets"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\gateway.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\gateway.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\jbsockets.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\jbsockets.h
-# End Source File
-# End Group
-# Begin Group "Utilities"
-
-# PROP Default_Filter ""
-# Begin Source File
-
-SOURCE=.\encode.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\encode.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\list.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\list.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\miscutil.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\miscutil.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\ssplit.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\ssplit.h
-# End Source File
-# End Group
-# End Target
-# End Project
diff --git a/external/privoxy/vc_privoxy.dsw b/external/privoxy/vc_privoxy.dsw
deleted file mode 100644
index 9685de2..0000000
--- a/external/privoxy/vc_privoxy.dsw
+++ /dev/null
@@ -1,59 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 5.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "vc_console"=".\vc_console.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-    Begin Project Dependency
-    Project_Dep_Name vc_dftables
-    End Project Dependency
-}}}
-
-###############################################################################
-
-Project: "vc_dftables"=".\pcre\vc_dftables.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "vc_privoxy"=".\vc_privoxy.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-    Begin Project Dependency
-    Project_Dep_Name vc_dftables
-    End Project Dependency
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-
diff --git a/external/privoxy/w32.rc b/external/privoxy/w32.rc
deleted file mode 100644
index 93b518a..0000000
--- a/external/privoxy/w32.rc
+++ /dev/null
@@ -1,343 +0,0 @@
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32.rc,v $
- *
- * Purpose     :  Windows GUI resource script.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32.rc,v $
- *    Revision 1.22  2009/01/01 15:09:23  ler762
- *    Change the Windows taskbar icon when privoxy is toggled off.
- *
- *    Revision 1.21  2008/11/02 14:37:47  ler762
- *    commit the part of the patches I've been using that were written by torford and gjmurphy
- *      [ 1824315 ] Minor code cleanup
- *      [ 1781135 ] Patch - Add clear log, select all, and Accelerators for w32
- *        http://sourceforge.net/tracker/?func=detail&atid=311118&aid=1781135&group_id=11118
- *    The full patch adds control keys A(select all), C(copy) and D(delete all) to the
- *    Privoxy log window menu.  Select all and copy work for me without the patch
- *    (albeit without showing the accelerator keys on the menu), so the only part of the
- *    patch I've been using for the last year or so has been the ctrl-d to delete
- *    everything in the Privoxy log window.
- *
- *    Revision 1.20  2006/08/18 02:06:25  david__schmidt
- *    Making icon go back to blue when idle.
- *    See: bug #967648.
- *
- *    Revision 1.19  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.17.2.1  2002/08/21 17:58:40  oes
- *     - Reorder of Win32 menu
- *     - "Show Privoxy Window" now a toggle
- *     - Temp kludge to let user and default action file be edited through win32 GUI (FR 592080)
- *
- *    Revision 1.17  2002/03/31 17:19:00  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.16  2002/03/26 22:57:44  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.15  2002/03/24 14:29:25  jongfoster
- *    Renaming icon file
- *
- *    Revision 1.14  2002/03/24 12:07:36  jongfoster
- *    Consistern name for filters file
- *
- *    Revision 1.13  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.12  2001/07/30 22:16:07  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.11  2001/07/21 17:53:41  jongfoster
- *    Adding version information block.
- *
- *    Revision 1.10  2001/07/19 19:14:19  haroon
- *    -  Removed all #ifdef PCRS. The .rc file extension had eluded Andreas.
- *
- *    Revision 1.9  2001/06/07 23:08:54  jongfoster
- *    Forward and ACL edit options removed.
- *    Config edit option renamed from "&Junkbuster" to "&Configuration".
- *
- *    Revision 1.8  2001/05/31 21:37:11  jongfoster
- *    GUI changes to rename "permissions file" to "actions file".
- *
- *    Revision 1.7  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.6  2001/05/26 14:15:18  jongfoster
- *    Cosmetic fix: // -> block comment
- *
- *    Revision 1.5  2001/05/26 13:24:31  jongfoster
- *    New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor.
- *    This #define cannot be set from ./configure - there's no point, it
- *    doesn't work yet.  See feature request # 425722
- *    (I missed this file in my original checkin)
- *
- *    Revision 1.4  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.3  2001/05/25 22:33:40  jongfoster
- *    CRLF->LF
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:07  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-#include "config.h"
-
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-
-#include "w32res.h"
-
-#ifdef __MINGW32__
-#include "cygwin.h"
-#endif
-
-/****************************************************************************
- *  Language-neutral resources
- ****************************************************************************/
-
-#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_NEU)
-#ifdef _WIN32
-/* LANGUAGE LANG_NEUTRAL, SUBLANG_NEUTRAL */
-#pragma code_page(1252)
-#endif /* _WIN32 */
-
-/*
- * Icons
- *
- * Icon with lowest ID value placed first to ensure application icon
- * remains consistent on all systems.
- */
-IDI_MAINICON            ICON    DISCARDABLE     "icons/privoxy.ico"
-IDI_ANIMATED1           ICON    DISCARDABLE     "icons/ico00001.ico"
-IDI_ANIMATED2           ICON    DISCARDABLE     "icons/ico00002.ico"
-IDI_ANIMATED3           ICON    DISCARDABLE     "icons/ico00003.ico"
-IDI_ANIMATED4           ICON    DISCARDABLE     "icons/ico00004.ico"
-IDI_ANIMATED5           ICON    DISCARDABLE     "icons/ico00005.ico"
-IDI_ANIMATED6           ICON    DISCARDABLE     "icons/ico00006.ico"
-IDI_ANIMATED7           ICON    DISCARDABLE     "icons/ico00007.ico"
-IDI_ANIMATED8           ICON    DISCARDABLE     "icons/ico00008.ico"
-IDI_IDLE                ICON    DISCARDABLE     "icons/privoxy.ico"
-IDI_OFF                 ICON    DISCARDABLE     "icons/off.ico"
-
-#endif /* Neutral resources */
-
-
-/****************************************************************************
- *  English (U.S.) resources
- ****************************************************************************/
-
-#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU)
-#ifdef _WIN32
-/* LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US */
-#pragma code_page(1252)
-#endif /* def _WIN32 */
-
-/*
- * File Version
- */
-#ifndef _MAC
-
-VS_VERSION_INFO VERSIONINFO
- FILEVERSION VERSION_MAJOR,VERSION_MINOR,VERSION_POINT,0
- PRODUCTVERSION VERSION_MAJOR,VERSION_MINOR,VERSION_POINT,0
- FILEFLAGSMASK 0x3fL
-#ifdef _DEBUG
- FILEFLAGS 0x1L
-#else
- FILEFLAGS 0x0L
-#endif
- FILEOS 0x40004L
- FILETYPE 0x1L
- FILESUBTYPE 0x0L
-BEGIN
-    BLOCK "StringFileInfo"
-    BEGIN
-        BLOCK "040904b0"
-        BEGIN
-            VALUE "CompanyName", "The Privoxy team - www.privoxy.org\0"
-            VALUE "FileDescription", "Privoxy\0"
-            VALUE "FileVersion", VERSION "\0"
-            VALUE "InternalName", "Privoxy\0"
-            VALUE "LegalCopyright", "Distributed under the GNU GPL\0"
-            VALUE "OriginalFilename", "privoxy.exe\0"
-            VALUE "ProductName", "Privoxy\0"
-            VALUE "ProductVersion", VERSION "\0"
-        END
-    END
-    BLOCK "VarFileInfo"
-    BEGIN
-        VALUE "Translation", 0x409, 1200
-    END
-END
-
-#endif /* ndef _MAC */
-
-
-/*
- * Menus
- */
-
-IDR_TRAYMENU MENU DISCARDABLE
-BEGIN
-    POPUP "Popup"
-    BEGIN
-        MENUITEM "E&xit Privoxy",      ID_FILE_EXIT
-        MENUITEM                       SEPARATOR
-        POPUP "E&dit.."
-        BEGIN
-            MENUITEM "&Main Configuration",           ID_TOOLS_EDITCONFIG
-            MENUITEM "&Default Actions",              ID_TOOLS_EDITDEFAULTACTIONS
-            MENUITEM "&User Actions",                 ID_TOOLS_EDITUSERACTIONS
-            MENUITEM "&Filters",                      ID_TOOLS_EDITFILTERS
-#ifdef FEATURE_TRUST
-            MENUITEM "&Trust list",                   ID_TOOLS_EDITTRUST
-#endif /* def FEATURE_TRUST */
-        END
-        MENUITEM                              SEPARATOR
-#ifdef FEATURE_TOGGLE
-        MENUITEM "&Enable",                   ID_TOGGLE_ENABLED, CHECKED
-#endif /* def FEATURE_TOGGLE */
-        MENUITEM "Show Privoxy &Window",      ID_TOGGLE_SHOWWINDOW, CHECKED
-    END
-END
-
-IDR_LOGVIEW MENU DISCARDABLE
-BEGIN
-    POPUP "&File"
-    BEGIN
-        MENUITEM "E&xit",                       ID_FILE_EXIT
-    END
-    POPUP "&Edit"
-    BEGIN
-        MENUITEM "Copy",                        ID_EDIT_COPY
-    END
-    POPUP "&View"
-    BEGIN
-        MENUITEM "&Clear Log\tCtrl+D",          ID_VIEW_CLEARLOG
-        MENUITEM                                SEPARATOR
-        MENUITEM "&Log Messages",               ID_VIEW_LOGMESSAGES, CHECKED
-        MENUITEM "Message &Highlighting",       ID_VIEW_MESSAGEHIGHLIGHTING, CHECKED
-        MENUITEM "Limit &Buffer Size",          ID_VIEW_LIMITBUFFERSIZE, CHECKED
-        MENUITEM "&Activity Animation",         ID_VIEW_ACTIVITYANIMATION, CHECKED
-    END
-    POPUP "&Options"
-    BEGIN
-#ifdef FEATURE_TOGGLE
-        MENUITEM "&Enable",                     ID_TOGGLE_ENABLED, CHECKED
-        MENUITEM                                SEPARATOR
-#endif /* def FEATURE_TOGGLE */
-        MENUITEM "Edit Main &Configuration",      ID_TOOLS_EDITCONFIG
-        MENUITEM "Edit &Default Actions",         ID_TOOLS_EDITDEFAULTACTIONS
-        MENUITEM "Edit &User Actions",            ID_TOOLS_EDITUSERACTIONS
-        MENUITEM "Edit &Filters",                 ID_TOOLS_EDITFILTERS
-#ifdef FEATURE_TRUST
-        MENUITEM "Edit &Trust list",              ID_TOOLS_EDITTRUST
-#endif /* def FEATURE_TRUST */
-    END
-    POPUP "&Help"
-    BEGIN
-        MENUITEM "Privoxy &FAQ",                ID_HELP_FAQ
-        MENUITEM "Privoxy &Manual",             ID_HELP_MANUAL
-        MENUITEM "GNU &General Public Licence", ID_HELP_GPL
-        MENUITEM                                SEPARATOR
-        MENUITEM "Privoxy Status...",           ID_HELP_STATUS
-        MENUITEM                                SEPARATOR
-        MENUITEM "About Privoxy...",            ID_HELP_ABOUT
-    END
-END
-
-IDR_POPUP_SELECTION MENU DISCARDABLE
-BEGIN
-    POPUP "Popup"
-    BEGIN
-        MENUITEM "&Copy",                       ID_EDIT_COPY
-    END
-END
-
-
-/*
- * Accelerators
- */
-
-IDR_ACCELERATOR ACCELERATORS DISCARDABLE
-BEGIN
-    "C",            ID_EDIT_COPY,           VIRTKEY, CONTROL, NOINVERT
-    "D",            ID_VIEW_CLEARLOG,       VIRTKEY, CONTROL, NOINVERT
-END
-
-#endif /* English (U.S.) resources */
diff --git a/external/privoxy/w32log.c b/external/privoxy/w32log.c
deleted file mode 100644
index e5df8b0..0000000
--- a/external/privoxy/w32log.c
+++ /dev/null
@@ -1,1480 +0,0 @@
-const char w32log_rcs[] = "$Id: w32log.c,v 1.33 2009/03/09 19:02:09 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32log.c,v $
- *
- * Purpose     :  Functions for creating and destroying the log window,
- *                ouputting strings, processing messages and so on.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 1999 Adam Lock
- *                <locka@xxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32log.c,v $
- *    Revision 1.33  2009/03/09 19:02:09  fabiankeil
- *    Request the default charset in LogPutStringNoMatch().
- *    Submitted by Burberry in #2674342 as fix for #2662382.
- *
- *    Revision 1.32  2009/03/09 18:32:48  fabiankeil
- *    Use the Privoxy icon in the alt+tab window.
- *    Patch submitted by Burberry in #2674342.
- *
- *    Revision 1.31  2009/03/07 17:58:02  fabiankeil
- *    Fix two mingw32-only buffer overflows. Note that triggering
- *    them requires control over the configuration file in which
- *    case all bets are off anyway.
- *
- *    Revision 1.30  2009/01/01 15:09:23  ler762
- *    Change the Windows taskbar icon when privoxy is toggled off.
- *
- *    Revision 1.29  2008/12/20 15:27:40  ler762
- *    The crunch log message format changed, so update the strings to highlight
- *    in the log window.
- *
- *    Revision 1.28  2008/11/02 14:37:47  ler762
- *    commit the part of the patches I've been using that were written by torford and gjmurphy
- *      [ 1824315 ] Minor code cleanup
- *      [ 1781135 ] Patch - Add clear log, select all, and Accelerators for w32
- *        http://sourceforge.net/tracker/?func=detail&atid=311118&aid=1781135&group_id=11118
- *    The full patch adds control keys A(select all), C(copy) and D(delete all) to the
- *    Privoxy log window menu.  Select all and copy work for me without the patch
- *    (albeit without showing the accelerator keys on the menu), so the only part of the
- *    patch I've been using for the last year or so has been the ctrl-d to delete
- *    everything in the Privoxy log window.
- *
- *    Revision 1.27  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.25.2.5  2003/04/04 12:48:51  oes
- *    Fixed bug #711865:
- *     - Made tray menu correctly reflect initial window visibility state
- *     - Hopefully fixed problem where log window contents wasn't visible
- *       until vertical scroll bar was clicked. Thanks to Guy for the fix!
- *
- *    Revision 1.25.2.4  2003/03/11 11:53:59  oes
- *    Cosmetic: Renamed cryptic variable
- *
- *    Revision 1.25.2.3  2002/11/20 14:39:05  oes
- *    Fixed compiler warning
- *
- *    Revision 1.25.2.2  2002/09/25 15:23:10  oes
- *    Uncheck the "Show Privoxy Window" taskbar menu item when window gets minimized. Fixes bug #606804
- *
- *    Revision 1.25.2.1  2002/08/21 17:59:05  oes
- *     - "Show Privoxy Window" now a toggle
- *     - Temp kludge to let user and default action file be edited through win32 GUI (FR 592080)
- *
- *    Revision 1.25  2002/04/04 00:36:36  gliptak
- *    always use pcre for matching
- *
- *    Revision 1.24  2002/03/31 17:19:00  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.23  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.22  2002/03/24 12:48:23  jongfoster
- *    Fixing doc links
- *
- *    Revision 1.21  2002/03/24 12:07:35  jongfoster
- *    Consistern name for filters file
- *
- *    Revision 1.20  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.19  2002/01/17 21:04:17  jongfoster
- *    Replacing hard references to the URL of the config interface
- *    with #defines from project.h
- *
- *    Revision 1.18  2001/11/30 23:37:24  jongfoster
- *    Renaming the Win32 config file to config.txt - this is almost the
- *    same as the corresponding UNIX name "config"
- *
- *    Revision 1.17  2001/11/16 00:46:31  jongfoster
- *    Fixing compiler warnings
- *
- *    Revision 1.16  2001/08/01 19:58:12  jongfoster
- *    Fixing documentation filenames in help menu, and making status
- *    option work without needing the "Junkbuster Status.URL" file.
- *
- *    Revision 1.15  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.14  2001/07/29 18:47:05  jongfoster
- *    Adding missing #include "loadcfg.h"
- *
- *    Revision 1.13  2001/07/19 19:15:14  haroon
- *    - Added a FIXME for EditFile but didn't fix :-)
- *
- *    Revision 1.12  2001/07/13 14:04:59  oes
- *    Removed all #ifdef PCRS
- *
- *    Revision 1.11  2001/06/07 23:08:12  jongfoster
- *    Forward and ACL edit options removed.
- *
- *    Revision 1.10  2001/05/31 21:37:11  jongfoster
- *    GUI changes to rename "permissions file" to "actions file".
- *
- *    Revision 1.9  2001/05/31 17:33:13  oes
- *
- *    CRLF -> LF
- *
- *    Revision 1.8  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.7  2001/05/26 01:26:34  jongfoster
- *    New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor.
- *    This #define cannot be set from ./configure - there's no point, it
- *    doesn't work yet.  See feature request # 425722
- *
- *    Revision 1.6  2001/05/26 00:31:30  jongfoster
- *    Fixing compiler warning about comparing signed/unsigned.
- *
- *    Revision 1.5  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.4  2001/05/22 18:56:28  oes
- *    CRLF -> LF
- *
- *    Revision 1.3  2001/05/20 15:07:54  jongfoster
- *    File is now ignored if _WIN_CONSOLE is defined.
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:07  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <assert.h>
-#include <stdio.h>
-
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-#include <richedit.h>
-
-#include "project.h"
-#include "w32log.h"
-#include "w32taskbar.h"
-#include "win32.h"
-#include "w32res.h"
-#include "jcc.h"
-#include "miscutil.h"
-#include "errlog.h"
-#include "loadcfg.h"
-
-const char w32res_h_rcs[] = W32RES_H_VERSION;
-
-#ifdef __MINGW32__
-#include "cygwin.h"
-const char cygwin_h_rcs[] = CYGWIN_H_VERSION;
-#endif
-
-const char w32log_h_rcs[] = W32LOG_H_VERSION;
-
-#ifndef _WIN_CONSOLE /* entire file */
-
-/*
- * Timers and the various durations
- */
-#define TIMER_ANIM_ID               1
-#define TIMER_ANIM_TIME             100
-#define TIMER_ANIMSTOP_ID           2
-#define TIMER_ANIMSTOP_TIME         1000
-#define TIMER_CLIPBUFFER_ID         3
-#define TIMER_CLIPBUFFER_TIME       1000
-#define TIMER_CLIPBUFFER_FORCE_ID   4
-#define TIMER_CLIPBUFFER_FORCE_TIME 5000
-
-/*
- * Styles of text that can be output
- */
-#define STYLE_NONE      0
-#define STYLE_HIGHLIGHT 1
-#define STYLE_LINK      2
-#define STYLE_HEADER    3
-
-/*
- * Number of frames of animation in tray activity sequence
- */
-#define ANIM_FRAMES 8
-
-#define DEFAULT_MAX_BUFFER_LINES    200
-#define DEFAULT_LOG_FONT_NAME       "MS Sans Serif"
-#define DEFAULT_LOG_FONT_SIZE       8
-
-/*
- * These values affect the way the log window behaves, they should be read
- * from a file but for the moment, they are hardcoded here. Some options are
- * configurable through the UI.
- */
-
-/* Indicates whether task bar shows activity animation */
-BOOL g_bShowActivityAnimation = 1;
-
-/* Indicates whether the log window is shown */
-BOOL g_bShowLogWindow = 1;
-
-/* Indicates if the log window appears on the task bar */
-BOOL g_bShowOnTaskBar = 0;
-
-/* Indicates whether closing the log window really just hides it */
-BOOL g_bCloseHidesWindow = 1;
-
-/* Indicates if messages are logged at all */
-BOOL g_bLogMessages = 1;
-
-/* Indicates whether log messages are highlighted */
-BOOL g_bHighlightMessages = 1;
-
-/* Indicates if buffer is limited in size */
-BOOL g_bLimitBufferSize = 1;
-
-/* Maximum number of lines allowed in buffer when limited */
-int g_nMaxBufferLines = DEFAULT_MAX_BUFFER_LINES;
-
-/* Font to use */
-char g_szFontFaceName[32] = DEFAULT_LOG_FONT_NAME;
-
-/* Size of font to use */
-int g_nFontSize = DEFAULT_LOG_FONT_SIZE;
-
-
-/* FIXME: this is a kludge */
-
-const char * g_default_actions_file = NULL;
-const char * g_user_actions_file = NULL;
-const char * g_re_filterfile = NULL;
-#ifdef FEATURE_TRUST
-const char * g_trustfile = NULL;
-#endif /* def FEATURE_TRUST */
-
-/* FIXME: end kludge */
-
-/* Regular expression for detected URLs */
-#define RE_URL "http:[^ \n\r]*"
-
-/*
- * Regular expressions that are used to perform highlight in the log window
- */
-static struct _Pattern
-{
-   const char *str;
-   int style;
-   regex_t buffer;
-} patterns_to_highlight[] =
-{
-   /* url headers */
-   { RE_URL,                STYLE_LINK },
-/* { "[a-zA-Z0-9]+\\.[a-zA-Z0-9]+\\.[a-zA-Z0-9]+\\.[^ \n\r]*", STYLE_LINK }, */
-   /* interesting text to highlight */
-   /*   see jcc.c crunch_reason for the full list */
-   { "Crunch: Blocked:",            STYLE_HIGHLIGHT },
-   { "Crunch: Untrusted",           STYLE_HIGHLIGHT },
-   { "Crunch: Redirected:",         STYLE_HIGHLIGHT },
-   { "Crunch: DNS failure",         STYLE_HIGHLIGHT },
-   { "Crunch: Forwarding failed",   STYLE_HIGHLIGHT },
-   { "Crunch: Connection failure",  STYLE_HIGHLIGHT },
-   { "Crunch: Out of memory",       STYLE_HIGHLIGHT },
-   /* what are all the possible error strings?? */
-   { "Error:",                      STYLE_HIGHLIGHT },
-   /* http headers */
-   { "referer:",            STYLE_HEADER },
-   { "proxy-connection:",   STYLE_HEADER },
-   { "proxy-agent:",        STYLE_HEADER },
-   { "user-agent:",         STYLE_HEADER },
-   { "host:",               STYLE_HEADER },
-   { "accept:",             STYLE_HEADER },
-   { "accept-encoding:",    STYLE_HEADER },
-   { "accept-language:",    STYLE_HEADER },
-   { "accept-charset:",     STYLE_HEADER },
-   { "accept-ranges:",      STYLE_HEADER },
-   { "date:",               STYLE_HEADER },
-   { "cache-control:",      STYLE_HEADER },
-   { "cache-last-checked:", STYLE_HEADER },
-   { "connection:",         STYLE_HEADER },
-   { "content-type",        STYLE_HEADER },
-   { "content-length",      STYLE_HEADER },
-   { "cookie",              STYLE_HEADER },
-   { "last-modified:",      STYLE_HEADER },
-   { "pragma:",             STYLE_HEADER },
-   { "server:",             STYLE_HEADER },
-   { "etag:",               STYLE_HEADER },
-   { "expires:",            STYLE_HEADER },
-   { "warning:",            STYLE_HEADER },
-   /* this is the terminator statement - do not delete! */
-   { NULL,                  STYLE_NONE }
-};
-
-/*
- * Public variables
- */
-HWND g_hwndLogFrame;
-HICON g_hiconApp;
-
-/*
- * Private variables
- */
-static CRITICAL_SECTION g_criticalsection;
-static HWND g_hwndTray;
-static HWND g_hwndLogBox;
-static WNDPROC g_fnLogBox;
-static HICON g_hiconAnim[ANIM_FRAMES];
-static HICON g_hiconIdle;
-static HICON g_hiconOff;
-static int g_nAnimFrame;
-static BOOL g_bClipPending = FALSE;
-static int g_nRichEditVersion = 0;
-
-/*
- * Private functions
- */
-static HWND CreateLogWindow(HINSTANCE hInstance, int nCmdShow);
-static HWND CreateHiddenLogOwnerWindow(HINSTANCE hInstance);
-static LRESULT CALLBACK LogWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam);
-static LRESULT CALLBACK LogOwnerWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam);
-static LRESULT CALLBACK LogRichEditProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam);
-static BOOL InitRichEdit(void);
-static void LogClipBuffer(void);
-static void LogCreatePatternMatchingBuffers(void);
-static void LogDestroyPatternMatchingBuffers(void);
-static int LogPutStringNoMatch(const char *pszText, int style);
-static void SetIdleIcon(void);
-
-
-/*********************************************************************
- *
- * Function    :  InitLogWindow
- *
- * Description :  Initialise the log window.
- *
- * Parameters  :  None
- *
- * Returns     :  Always TRUE (there should be error checking on the resources).
- *
- *********************************************************************/
-BOOL InitLogWindow(void)
-{
-   int i;
-
-   /* Load the icons */
-   g_hiconIdle = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_IDLE));
-   g_hiconOff  = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_OFF));
-   for (i = 0; i < ANIM_FRAMES; i++)
-   {
-      g_hiconAnim[i] = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_ANIMATED1 + i));
-   }
-   g_hiconApp = LoadIcon(g_hInstance, MAKEINTRESOURCE(IDI_MAINICON));
-
-   /* Create the user interface */
-   g_hwndLogFrame = CreateLogWindow(g_hInstance, g_nCmdShow);
-   g_hwndTray = CreateTrayWindow(g_hInstance);
-   TrayAddIcon(g_hwndTray, 1, g_hiconApp, "Privoxy");
-
-   /* Create pattern matching buffers (for highlighting */
-   LogCreatePatternMatchingBuffers();
-
-   /* Create a critical section to protect multi-threaded access to certain things */
-   InitializeCriticalSection(&g_criticalsection);
-
-   return TRUE;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  TermLogWindow
- *
- * Description :  Cleanup the logwindow.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void TermLogWindow(void)
-{
-   int i;
-
-   LogDestroyPatternMatchingBuffers();
-
-   TrayDeleteIcon(g_hwndTray, 1);
-   DeleteObject(g_hiconApp);
-   DeleteObject(g_hiconIdle);
-   DeleteObject(g_hiconOff);
-   for (i = 0; i < ANIM_FRAMES; i++)
-   {
-      DeleteObject(g_hiconAnim[i]);
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogCreatePatternMatchingBuffers
- *
- * Description :  Compile the pattern matching buffers.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void LogCreatePatternMatchingBuffers(void)
-{
-   int i;
-   for (i = 0; patterns_to_highlight[i].str != NULL; i++)
-   {
-      regcomp(&patterns_to_highlight[i].buffer, patterns_to_highlight[i].str, REG_ICASE);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogDestroyPatternMatchingBuffers
- *
- * Description :  Free up the pattern matching buffers.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void LogDestroyPatternMatchingBuffers(void)
-{
-   int i;
-   for (i = 0; patterns_to_highlight[i].str != NULL; i++)
-   {
-      regfree(&patterns_to_highlight[i].buffer);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogGetURLUnderCursor
- *
- * Description :  Returns the URL from under the cursor (remember to free it!).
- *
- * Parameters  :  None
- *
- * Returns     :  NULL or a pointer to an URL string.
- *
- *********************************************************************/
-char *LogGetURLUnderCursor(void)
-{
-   char *szResult = NULL;
-   regex_t re;
-   POINT ptCursor;
-   POINTL ptl;
-   DWORD nPos;
-   DWORD nWordStart = 0;
-   DWORD nWordEnd = 0;
-
-   regcomp(&re, RE_URL, REG_ICASE);
-
-   /* Get the position of the cursor over the text window */
-   GetCursorPos(&ptCursor);
-   ScreenToClient(g_hwndLogBox, &ptCursor);
-   ptl.x = ptCursor.x;
-   ptl.y = ptCursor.y;
-
-   /* Search backwards and fowards to obtain the word that is highlighted */
-   nPos = LOWORD(SendMessage(g_hwndLogBox, EM_CHARFROMPOS, 0, (LPARAM) &ptl));
-   nWordStart = SendMessage(g_hwndLogBox, EM_FINDWORDBREAK, WB_LEFT, nPos);
-   nWordEnd = SendMessage(g_hwndLogBox, EM_FINDWORDBREAK, WB_RIGHTBREAK, nPos);
-
-   /* Compare the string to the pattern */
-   if (nWordEnd > nWordStart)
-   {
-      TEXTRANGE range;
-      regmatch_t match;
-
-      range.chrg.cpMin = nWordStart;
-      range.chrg.cpMax = nWordEnd;
-      range.lpstrText = (LPSTR)zalloc(nWordEnd - nWordStart + 1);
-      SendMessage(g_hwndLogBox, EM_GETTEXTRANGE, 0, (LPARAM) &range);
-
-      if (regexec(&re, range.lpstrText, 1, &match, 0) == 0)
-      {
-         szResult = range.lpstrText;
-      }
-      else
-      {
-         free(range.lpstrText);
-      }
-
-      regfree(&re);
-   }
-   return szResult;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogPutString
- *
- * Description :  Inserts text into the logging window.  This is really
- *                a regexp aware wrapper function to `LogPutStringNoMatch'.
- *
- * Parameters  :
- *          1  :  pszText = pointer to string going to the log window
- *
- * Returns     :  1 => success, else the return code from `LogPutStringNoMatch'.
- *                FIXME: this is backwards to the rest of IJB and to common
- *                programming practice.  Please use 0 => success instead.
- *
- *********************************************************************/
-int LogPutString(const char *pszText)
-{
-   int i;
-   int result = 0;
-
-   if (pszText == NULL || strlen(pszText) == 0)
-   {
-      return 1;
-   }
-
-   if (!g_bLogMessages)
-   {
-      return 1;
-   }
-
-   /* Critical section stops multiple threads doing nasty interactions that
-    * foul up the highlighting and output.
-    */
-   EnterCriticalSection(&g_criticalsection);
-
-   if (g_bHighlightMessages)
-   {
-      regmatch_t match;
-
-      /* First things first, regexp scan for various things that we would like highlighted */
-      for (i = 0; patterns_to_highlight[i].str != NULL; i++)
-      {
-         if (regexec(&patterns_to_highlight[i].buffer, pszText, 1, &match, 0) == 0)
-         {
-            char *pszBefore = NULL;
-            char *pszMatch = NULL;
-            char *pszAfter = NULL;
-            int nMatchSize;
-
-            /* Split the string up into pieces representing the strings, before
-               at and after the matching pattern
-             */
-            if (match.rm_so > 0)
-            {
-               pszBefore = (char *)malloc((match.rm_so + 1) * sizeof(char));
-               memset(pszBefore, 0, (match.rm_so + 1) * sizeof(char));
-               strncpy(pszBefore, pszText, match.rm_so);
-            }
-            if (match.rm_eo < (regoff_t)strlen(pszText))
-            {
-               pszAfter = strdup(&pszText[match.rm_eo]);
-            }
-            nMatchSize = match.rm_eo - match.rm_so;
-            pszMatch = (char *)malloc(nMatchSize + 1);
-            strncpy(pszMatch, &pszText[match.rm_so], nMatchSize);
-            pszMatch[nMatchSize] = '\0';
-
-            /* Recursively call LogPutString */
-            if (pszBefore)
-            {
-               LogPutString(pszBefore);
-               free(pszBefore);
-            }
-            if (pszMatch)
-            {
-               LogPutStringNoMatch(pszMatch, patterns_to_highlight[i].style);
-               free(pszMatch);
-            }
-            if (pszAfter)
-            {
-               LogPutString(pszAfter);
-               free(pszAfter);
-            }
-
-            result = 1;
-            goto end;
-         }
-      }
-   }
-
-   result = LogPutStringNoMatch(pszText, STYLE_NONE);
-
-end:
-   LeaveCriticalSection(&g_criticalsection);
-
-   return result;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogPutStringNoMatch
- *
- * Description :  Puts a string into the logging window.
- *
- * Parameters  :
- *          1  :  pszText = pointer to string going to the log window
- *          2  :  style = STYLE_NONE, STYLE_HEADER, STYLE_HIGHLIGHT, or STYLE_LINK
- *
- * Returns     :  Always 1 => success.
- *                FIXME: this is backwards to the rest of IJB and to common
- *                programming practice.  Please use 0 => success instead.
- *
- *********************************************************************/
-int LogPutStringNoMatch(const char *pszText, int style)
-{
-   CHARRANGE range;
-   CHARFORMAT format;
-   int nTextLength;
-
-   assert(g_hwndLogBox);
-   if (g_hwndLogBox == NULL)
-   {
-      return 1;
-   }
-
-   /* TODO preserve existing selection */
-
-   /* Go to the end of the text */
-   nTextLength = GetWindowTextLength(g_hwndLogBox);
-   range.cpMin = nTextLength;
-   range.cpMax = nTextLength;
-   SendMessage(g_hwndLogBox, EM_EXSETSEL, 0, (LPARAM) &range);
-
-   /* Apply a formatting style */
-   memset(&format, 0, sizeof(format));
-   format.cbSize = sizeof(format);
-   format.dwMask = CFM_BOLD | CFM_UNDERLINE | CFM_STRIKEOUT |
-      CFM_ITALIC | CFM_COLOR | CFM_FACE | CFM_SIZE | CFM_CHARSET;
-   format.bCharSet = DEFAULT_CHARSET;
-   format.yHeight = (g_nFontSize * 1440) / 72;
-   strlcpy(format.szFaceName, g_szFontFaceName, sizeof(format.szFaceName));
-   if (style == STYLE_NONE)
-   {
-      /* DO NOTHING */
-      format.dwEffects |= CFE_AUTOCOLOR;
-   }
-   else if (style == STYLE_HEADER)
-   {
-      format.dwEffects |= CFE_AUTOCOLOR | CFE_ITALIC;
-   }
-   else if (style == STYLE_HIGHLIGHT)
-   {
-      format.dwEffects |= CFE_AUTOCOLOR | CFE_BOLD;
-   }
-   else if (style == STYLE_LINK)
-   {
-      format.dwEffects |= CFE_UNDERLINE;
-      format.crTextColor = RGB(0, 0, 255);
-   }
-   SendMessage(g_hwndLogBox, EM_SETCHARFORMAT, SCF_SELECTION, (LPARAM) &format);
-
-   /* Append text to the end */
-   SendMessage(g_hwndLogBox, EM_REPLACESEL, FALSE, (LPARAM) pszText);
-
-   /* TODO Restore the old selection */
-
-   /* Purge buffer */
-   if (strchr(pszText, '\n') != NULL)
-   {
-      SetTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_ID, TIMER_CLIPBUFFER_TIME, NULL);
-      if (!g_bClipPending)
-      {
-         /* Set the force clip timer going. This timer ensures clipping is done
-            intermittently even when there is a sustained burst of logging
-         */
-         SetTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_FORCE_ID, TIMER_CLIPBUFFER_FORCE_TIME, NULL);
-      }
-      g_bClipPending = TRUE;
-   }
-
-   return 1;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogShowActivity
- *
- * Description :  Start the spinner.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void LogShowActivity(void)
-{
-   /* Start some activity timers */
-   if (g_bShowActivityAnimation)
-   {
-      SetTimer(g_hwndLogFrame, TIMER_ANIM_ID, TIMER_ANIM_TIME, NULL);
-      SetTimer(g_hwndLogFrame, TIMER_ANIMSTOP_ID, TIMER_ANIMSTOP_TIME, NULL);
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogClipBuffer
- *
- * Description :  Prunes old lines from the log.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void LogClipBuffer(void)
-{
-   int nLines = SendMessage(g_hwndLogBox, EM_GETLINECOUNT, 0, 0);
-   if (g_bLimitBufferSize && nLines > g_nMaxBufferLines)
-   {
-      /* Compute the range representing the lines to be deleted */
-      LONG nLastLineToDelete = nLines - g_nMaxBufferLines;
-      LONG nLastChar = SendMessage(g_hwndLogBox, EM_LINEINDEX, nLastLineToDelete, 0);
-      CHARRANGE range;
-      range.cpMin = 0;
-      range.cpMax = nLastChar;
-
-      /* TODO get current selection */
-
-      /* TODO adjust and clip old selection against range to be deleted */
-
-      /* Select range and erase it (turning off autoscroll to prevent
-         nasty scrolling) */
-      SendMessage(g_hwndLogBox, EM_SETOPTIONS, ECOOP_XOR, ECO_AUTOVSCROLL);
-      SendMessage(g_hwndLogBox, EM_EXSETSEL, 0, (LPARAM) &range);
-      SendMessage(g_hwndLogBox, EM_REPLACESEL, FALSE, (LPARAM) "");
-      SendMessage(g_hwndLogBox, EM_SETOPTIONS, ECOOP_XOR, ECO_AUTOVSCROLL);
-
-      /* reposition (back to) the end of the log content */
-      range.cpMin = SendMessage (g_hwndLogBox, WM_GETTEXTLENGTH, 0, 0);
-      range.cpMax = -1;
-      SendMessage(g_hwndLogBox, EM_EXSETSEL, 0, (LPARAM) &range);
- 
-      /* restore vertical ScrollBar stuff (messed up by AUTOVSCROLL) */
-      SendMessage (g_hwndLogBox, EM_SCROLL, SB_LINEDOWN, 0);
- 
-   }
-
-}                                        
-
-
-/*********************************************************************
- *
- * Function    :  CreateHiddenLogOwnerWindow
- *
- * Description :  Creates a hidden owner window that stops the log
- *                window appearing in the task bar.
- *
- * Parameters  :
- *          1  :  hInstance = application's instance handle
- *
- * Returns     :  Handle to newly created window.
- *
- *********************************************************************/
-HWND CreateHiddenLogOwnerWindow(HINSTANCE hInstance)
-{
-   static const char *szWndName = "PrivoxyLogOwner";
-   WNDCLASS wc;
-   HWND hwnd;
-
-   wc.style          = 0;
-   wc.lpfnWndProc    = LogOwnerWindowProc;
-   wc.cbClsExtra     = 0;
-   wc.cbWndExtra     = 0;
-   wc.hInstance      = hInstance;
-   wc.hIcon          = g_hiconApp;
-   wc.hCursor        = 0;
-   wc.hbrBackground  = 0;
-   wc.lpszMenuName   = 0;
-   wc.lpszClassName  = szWndName;
-
-   RegisterClass(&wc);
-
-   hwnd = CreateWindow(szWndName, szWndName,
-      WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT,
-      CW_USEDEFAULT, NULL, NULL, hInstance, NULL );
-
-   return hwnd;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogOwnerWindowProc
- *
- * Description :  Dummy procedure that does nothing special.
- *
- * Parameters  :
- *          1  :  hwnd = window handle
- *          2  :  uMsg = message number
- *          3  :  wParam = first param for this message
- *          4  :  lParam = next param for this message
- *
- * Returns     :  Same as `DefWindowProc'.
- *
- *********************************************************************/
-LRESULT CALLBACK LogOwnerWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
-{
-   return DefWindowProc(hwnd, uMsg, wParam, lParam);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  CreateLogWindow
- *
- * Description :  Create the logging window.
- *
- * Parameters  :
- *          1  :  hInstance = application's instance handle
- *          2  :  nCmdShow = window show value (MIN, MAX, NORMAL, etc...)
- *
- * Returns     :  Handle to newly created window.
- *
- *********************************************************************/
-HWND CreateLogWindow(HINSTANCE hInstance, int nCmdShow)
-{
-   static const char *szWndName = "PrivoxyLogWindow";
-   static const char *szWndTitle = "Privoxy";
-
-   HWND hwnd = NULL;
-   HWND hwndOwner = (g_bShowOnTaskBar) ? NULL : CreateHiddenLogOwnerWindow(hInstance);
-   RECT rcClient;
-   WNDCLASSEX wc;
-
-   memset(&wc, 0, sizeof(wc));
-   wc.cbSize         = sizeof(wc);
-   wc.style          = CS_DBLCLKS;
-   wc.lpfnWndProc    = LogWindowProc;
-   wc.cbClsExtra     = 0;
-   wc.cbWndExtra     = 0;
-   wc.hInstance      = hInstance;
-   wc.hIcon          = g_hiconApp;
-   wc.hCursor        = 0;
-   wc.hbrBackground  = 0;
-   wc.lpszMenuName   = MAKEINTRESOURCE(IDR_LOGVIEW);
-   wc.lpszClassName  = szWndName;
-   wc.hbrBackground  = GetStockObject(WHITE_BRUSH);
-   RegisterClassEx(&wc);
-
-   hwnd = CreateWindowEx(WS_EX_APPWINDOW, szWndName, szWndTitle,
-      WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT,
-      CW_USEDEFAULT, hwndOwner, NULL, hInstance, NULL);
-
-   /* Now create a child list box */
-   GetClientRect(hwnd, &rcClient);
-
-   /* Create a rich edit control */
-   InitRichEdit();
-   g_hwndLogBox = CreateWindowEx(0, (g_nRichEditVersion == 0x0100) ? "RichEdit" : RICHEDIT_CLASS, "",
-      ES_AUTOVSCROLL | ES_MULTILINE | ES_READONLY | ES_NOHIDESEL | WS_CHILD | WS_VSCROLL | WS_HSCROLL | WS_VISIBLE,
-      rcClient.left, rcClient.top, rcClient.right, rcClient.bottom,
-      hwnd, NULL, hInstance, NULL);
-/* SendMessage(g_hwndLogBox, EM_SETWORDWRAPMODE, 0, 0); */
-
-   /* Subclass the control to catch certain messages */
-   g_fnLogBox = (WNDPROC) GetWindowLong(g_hwndLogBox, GWL_WNDPROC);
-   SetWindowLong(g_hwndLogBox, GWL_WNDPROC, (LONG) LogRichEditProc);
-
-   /* Minimizing looks stupid when the log window is not on the task bar, so hide instead */
-   if (!g_bShowOnTaskBar &&
-         (nCmdShow == SW_SHOWMINIMIZED ||
-          nCmdShow == SW_MINIMIZE ||
-          nCmdShow == SW_SHOWMINNOACTIVE))
-   {
-      g_bShowLogWindow = FALSE;
-      nCmdShow = SW_HIDE;
-   }
-
-   ShowWindow(hwnd, nCmdShow);
-   UpdateWindow(hwnd);
-
-
-   GetClientRect(g_hwndLogFrame, &rcClient);
-   SetWindowPos(g_hwndLogBox, NULL, rcClient.left, rcClient.top, rcClient.right - rcClient.left, rcClient.bottom - rcClient.top, SWP_NOZORDER);
-
-   return hwnd;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  InitRichEdit
- *
- * Description :  Initialise the rich edit control library.
- *
- * Parameters  :  None
- *
- * Returns     :  TRUE => success, FALSE => failure.
- *                FIXME: this is backwards to the rest of IJB and to common
- *                programming practice.  Please use 0 => success instead.
- *
- *********************************************************************/
-BOOL InitRichEdit(void)
-{
-   static HINSTANCE hInstRichEdit;
-   if (hInstRichEdit == NULL)
-   {
-      g_nRichEditVersion = 0;
-      hInstRichEdit = LoadLibraryA("RICHED20.DLL");
-      if (hInstRichEdit)
-      {
-         g_nRichEditVersion = _RICHEDIT_VER;
-      }
-      else
-      {
-         hInstRichEdit = LoadLibraryA("RICHED32.DLL");
-         if (hInstRichEdit)
-         {
-            g_nRichEditVersion = 0x0100;
-         }
-      }
-   }
-   return (hInstRichEdit != NULL) ? TRUE : FALSE;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  ShowLogWindow
- *
- * Description :  Shows or hides the log window.  We will also raise the
- *                window on a show command in case it is buried.
- *
- * Parameters  :
- *          1  :  bShow = TRUE to show, FALSE to mimize/hide
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void ShowLogWindow(BOOL bShow)
-{
-   if (bShow)
-   {
-      SetForegroundWindow(g_hwndLogFrame);
-      SetWindowPos(g_hwndLogFrame, HWND_TOP, 0, 0, 0, 0, SWP_SHOWWINDOW | SWP_NOSIZE | SWP_NOMOVE);
-      
-   }
-   else if (g_bShowOnTaskBar)
-   {
-      ShowWindow(g_hwndLogFrame, SW_MINIMIZE);
-   }
-   else
-   {
-      ShowWindow(g_hwndLogFrame, SW_HIDE);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  EditFile
- *
- * Description :  Opens the specified setting file for editing.
- * FIXME: What if the file has no associated application. Check for return values
-*        from ShellExecute??
- *
- * Parameters  :
- *          1  :  filename = filename from the config (aka config.txt) file.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void EditFile(const char *filename)
-{
-   if (filename)
-   {
-      ShellExecute(g_hwndLogFrame, "open", filename, NULL, NULL, SW_SHOWNORMAL);
-   }
-
-}
-
-
-/*--------------------------------------------------------------------------*/
-/* Windows message handlers                                                 */
-/*--------------------------------------------------------------------------*/
-
-
-/*********************************************************************
- *
- * Function    :  OnLogRButtonUp
- *
- * Description :  Handler for WM_RBUTTONUP messages.
- *
- * Parameters  :
- *          1  :  nModifier = wParam from mouse message (unused)
- *          2  :  x = x coordinate of the mouse event
- *          3  :  y = y coordinate of the mouse event
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void OnLogRButtonUp(int nModifier, int x, int y)
-{
-   HMENU hMenu = LoadMenu(g_hInstance, MAKEINTRESOURCE(IDR_POPUP_SELECTION));
-   if (hMenu != NULL)
-   {
-      HMENU hMenuPopup = GetSubMenu(hMenu, 0);
-
-      /* Check if there is a selection */
-      CHARRANGE range;
-      SendMessage(g_hwndLogBox, EM_EXGETSEL, 0, (LPARAM) &range);
-      if (range.cpMin == range.cpMax)
-      {
-         EnableMenuItem(hMenuPopup, ID_EDIT_COPY, MF_BYCOMMAND | MF_GRAYED);
-      }
-      else
-      {
-         EnableMenuItem(hMenuPopup, ID_EDIT_COPY, MF_BYCOMMAND | MF_ENABLED);
-      }
-
-      /* Display the popup */
-      TrackPopupMenu(hMenuPopup, TPM_LEFTALIGN | TPM_TOPALIGN | TPM_RIGHTBUTTON, x, y, 0, g_hwndLogFrame, NULL);
-      DestroyMenu(hMenu);
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  OnLogCommand
- *
- * Description :  Handler for WM_COMMAND messages.
- *
- * Parameters  :
- *          1  :  nCommand = the command portion of the menu selection event
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void OnLogCommand(int nCommand)
-{
-   switch (nCommand)
-   {
-      case ID_TOGGLE_SHOWWINDOW:
-         g_bShowLogWindow = !g_bShowLogWindow;
-
-         ShowLogWindow(g_bShowLogWindow);
-         break;
-
-      case ID_FILE_EXIT:
-         PostMessage(g_hwndLogFrame, WM_CLOSE, 0, 0);
-         break;
-
-      case ID_EDIT_COPY:
-         SendMessage(g_hwndLogBox, WM_COPY, 0, 0);
-         break;
-
-      case ID_VIEW_CLEARLOG:
-         SendMessage(g_hwndLogBox, WM_SETTEXT, 0, (LPARAM) "");
-         break;
-
-      case ID_VIEW_LOGMESSAGES:
-         g_bLogMessages = !g_bLogMessages;
-         /* SaveLogSettings(); */
-         break;
-
-      case ID_VIEW_MESSAGEHIGHLIGHTING:
-         g_bHighlightMessages = !g_bHighlightMessages;
-         /* SaveLogSettings(); */
-         break;
-
-      case ID_VIEW_LIMITBUFFERSIZE:
-         g_bLimitBufferSize = !g_bLimitBufferSize;
-         /* SaveLogSettings(); */
-         break;
-
-      case ID_VIEW_ACTIVITYANIMATION:
-         g_bShowActivityAnimation = !g_bShowActivityAnimation;
-         /* SaveLogSettings(); */
-         break;
-
-#ifdef FEATURE_TOGGLE
-      /* by haroon - change toggle to its opposite value */
-      case ID_TOGGLE_ENABLED:
-         global_toggle_state = !global_toggle_state;
-         if (global_toggle_state)
-         {
-            log_error(LOG_LEVEL_INFO, "Now toggled ON.");
-         }
-         else
-         {
-            log_error(LOG_LEVEL_INFO, "Now toggled OFF.");
-         }
-         SetIdleIcon();
-         break;
-#endif /* def FEATURE_TOGGLE */
-
-      case ID_TOOLS_EDITCONFIG:
-         EditFile(configfile);
-         break;
-
-      case ID_TOOLS_EDITDEFAULTACTIONS:
-         EditFile(g_default_actions_file);
-         break;
-
-      case ID_TOOLS_EDITUSERACTIONS:
-         EditFile(g_user_actions_file);
-         break;
-
-      case ID_TOOLS_EDITFILTERS:
-         EditFile(g_re_filterfile);
-         break;
-
-#ifdef FEATURE_TRUST
-      case ID_TOOLS_EDITTRUST:
-         EditFile(g_trustfile);
-         break;
-#endif /* def FEATURE_TRUST */
-
-      case ID_HELP_GPL:
-         ShellExecute(g_hwndLogFrame, "open", "LICENSE.txt", NULL, NULL, SW_SHOWNORMAL);
-         break;
-
-      case ID_HELP_FAQ:
-         ShellExecute(g_hwndLogFrame, "open", "doc\\faq\\index.html", NULL, NULL, SW_SHOWNORMAL);
-         break;
-
-      case ID_HELP_MANUAL:
-         ShellExecute(g_hwndLogFrame, "open", "doc\\user-manual\\index.html", NULL, NULL, SW_SHOWNORMAL);
-         break;
-
-      case ID_HELP_STATUS:
-         ShellExecute(g_hwndLogFrame, "open", CGI_PREFIX "show-status", NULL, NULL, SW_SHOWNORMAL);
-         break;
-
-      case ID_HELP_ABOUT:
-         MessageBox(g_hwndLogFrame, win32_blurb, "About Privoxy", MB_OK);
-         break;
-
-      default:
-         /* DO NOTHING */
-         break;
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  OnLogInitMenu
- *
- * Description :  Handler for WM_INITMENU messages.  Enable, disable,
- *                check, and/or uncheck menu options as apropos.
- *
- * Parameters  :
- *          1  :  hmenu = handle to menu to "make current"
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void OnLogInitMenu(HMENU hmenu)
-{
-   /* Only enable editors if there is a file to edit */
-   EnableMenuItem(hmenu, ID_TOOLS_EDITDEFAULTACTIONS, MF_BYCOMMAND | (g_default_actions_file ? MF_ENABLED : MF_GRAYED));
-   EnableMenuItem(hmenu, ID_TOOLS_EDITUSERACTIONS, MF_BYCOMMAND | (g_user_actions_file ? MF_ENABLED : MF_GRAYED));
-   EnableMenuItem(hmenu, ID_TOOLS_EDITFILTERS, MF_BYCOMMAND | (g_re_filterfile ? MF_ENABLED : MF_GRAYED));
-#ifdef FEATURE_TRUST
-   EnableMenuItem(hmenu, ID_TOOLS_EDITTRUST, MF_BYCOMMAND | (g_trustfile ? MF_ENABLED : MF_GRAYED));
-#endif /* def FEATURE_TRUST */
-
-   /* Check/uncheck options */
-   CheckMenuItem(hmenu, ID_VIEW_LOGMESSAGES, MF_BYCOMMAND | (g_bLogMessages ? MF_CHECKED : MF_UNCHECKED));
-   CheckMenuItem(hmenu, ID_VIEW_MESSAGEHIGHLIGHTING, MF_BYCOMMAND | (g_bHighlightMessages ? MF_CHECKED : MF_UNCHECKED));
-   CheckMenuItem(hmenu, ID_VIEW_LIMITBUFFERSIZE, MF_BYCOMMAND | (g_bLimitBufferSize ? MF_CHECKED : MF_UNCHECKED));
-   CheckMenuItem(hmenu, ID_VIEW_ACTIVITYANIMATION, MF_BYCOMMAND | (g_bShowActivityAnimation ? MF_CHECKED : MF_UNCHECKED));
-#ifdef FEATURE_TOGGLE
-   /* by haroon - menu item for Enable toggle on/off */
-   CheckMenuItem(hmenu, ID_TOGGLE_ENABLED, MF_BYCOMMAND | (global_toggle_state ? MF_CHECKED : MF_UNCHECKED));
-#endif /* def FEATURE_TOGGLE */
-   CheckMenuItem(hmenu, ID_TOGGLE_SHOWWINDOW, MF_BYCOMMAND | (g_bShowLogWindow ? MF_CHECKED : MF_UNCHECKED));
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  OnLogTimer
- *
- * Description :  Handler for WM_TIMER messages.
- *
- * Parameters  :
- *          1  :  nTimer = timer id (animation start/stop or clip buffer)
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void OnLogTimer(int nTimer)
-{
-   switch (nTimer)
-   {
-      case TIMER_ANIM_ID:
-         TraySetIcon(g_hwndTray, 1, g_hiconAnim[g_nAnimFrame++ % ANIM_FRAMES]);
-         break;
-
-      case TIMER_ANIMSTOP_ID:
-         g_nAnimFrame = 0;
-         SetIdleIcon();
-         KillTimer(g_hwndLogFrame, TIMER_ANIM_ID);
-         KillTimer(g_hwndLogFrame, TIMER_ANIMSTOP_ID);
-         break;
-
-      case TIMER_CLIPBUFFER_ID:
-      case TIMER_CLIPBUFFER_FORCE_ID:
-         LogClipBuffer();
-         g_bClipPending = FALSE;
-         KillTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_ID);
-         KillTimer(g_hwndLogFrame, TIMER_CLIPBUFFER_FORCE_ID);
-         break;
-
-      default:
-         /* DO NOTHING */
-         break;
-   }
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  SetIdleIcon
- *
- * Description :  Sets the tray icon to either idle or off
- *
- * Parameters  :  none
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void SetIdleIcon()
-{
-#ifdef FEATURE_TOGGLE
-         if (!global_toggle_state)
-         {
-            TraySetIcon(g_hwndTray, 1, g_hiconOff);
-            /* log_error(LOG_LEVEL_INFO, "Privoxy OFF icon selected."); */
-         }
-         else
-#endif /* def FEATURE_TOGGLE */
-         TraySetIcon(g_hwndTray, 1, g_hiconIdle);
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogRichEditProc
- *
- * Description :  Window subclass routine handles some events for the rich edit control.
- *
- * Parameters  :
- *          1  :  hwnd = window handle of the rich edit control
- *          2  :  uMsg = message number
- *          3  :  wParam = first param for this message
- *          4  :  lParam = next param for this message
- *
- * Returns     :  Appropriate M$ window message handler codes.
- *
- *********************************************************************/
-LRESULT CALLBACK LogRichEditProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
-{
-   switch (uMsg)
-   {
-      case WM_RBUTTONUP:
-      {
-         POINT pt;
-         pt.x = LOWORD(lParam);
-         pt.y = HIWORD(lParam);
-         ClientToScreen(hwnd, &pt);
-         OnLogRButtonUp(wParam, pt.x, pt.y);
-         return 0;
-      }
-      case WM_CHAR:
-      {
-         if ((GetKeyState(VK_CONTROL) != 0) && (wParam == 4)) /* ctrl+d */
-         {
-             OnLogCommand(ID_VIEW_CLEARLOG);
-             return 0;
-         }
-      }
-   }
-   return CallWindowProc(g_fnLogBox, hwnd, uMsg, wParam, lParam);
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  LogWindowProc
- *
- * Description :  Windows call back routine handles events on the log window.
- *
- * Parameters  :
- *          1  :  hwnd = handle of the logging window
- *          2  :  uMsg = message number
- *          3  :  wParam = first param for this message
- *          4  :  lParam = next param for this message
- *
- * Returns     :  Appropriate M$ window message handler codes.
- *
- *********************************************************************/
-LRESULT CALLBACK LogWindowProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
-{
-   switch (uMsg)
-   {
-      case WM_CREATE:
-         return 0;
-
-      case WM_CLOSE:
-         /* This is the end - beautiful friend - the end */
-         DestroyWindow(g_hwndLogBox);
-         DestroyWindow(g_hwndLogFrame);
-         return 0;
-
-      case WM_DESTROY:
-         PostQuitMessage(0);
-         return 0;
-
-      case WM_SHOWWINDOW:
-         g_bShowLogWindow = wParam;
-      case WM_SIZE:
-         /* Resize the logging window to fit the new frame */
-         if (g_hwndLogBox)
-         {
-            RECT rc;
-            GetClientRect(g_hwndLogFrame, &rc);
-            SetWindowPos(g_hwndLogBox, NULL, rc.left, rc.top, rc.right - rc.left, rc.bottom - rc.top, SWP_NOZORDER);
-         }
-         return 0;
-
-      case WM_INITMENU:
-         OnLogInitMenu((HMENU) wParam);
-         return 0;
-
-      case WM_TIMER:
-         OnLogTimer(wParam);
-         return 0;
-
-      case WM_COMMAND:
-         OnLogCommand(LOWORD(wParam));
-         return 0;
-
-      case WM_SYSCOMMAND:
-         switch (wParam)
-         {
-            case SC_CLOSE:
-               if (g_bCloseHidesWindow)
-               {
-                  ShowLogWindow(FALSE);
-                  return 0;
-               }
-               break;
-            case SC_MINIMIZE:
-               ShowLogWindow(FALSE);
-               return 0;
-         }
-         break;
-
-      case WM_CHAR:
-         if ((GetKeyState(VK_CONTROL) != 0) && (wParam == 4)) /* ctrl+d */
-         {
-             OnLogCommand(ID_VIEW_CLEARLOG);
-             return 0;
-         }
-         break;
-   }
-
-   return DefWindowProc(hwnd, uMsg, wParam, lParam);
-
-}
-
-#endif /* ndef _WIN_CONSOLE - entire file */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/w32log.h b/external/privoxy/w32log.h
deleted file mode 100644
index fff13ad..0000000
--- a/external/privoxy/w32log.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef W32LOG_H_INCLUDED
-#define W32LOG_H_INCLUDED
-#define W32LOG_H_VERSION "$Id: w32log.h,v 1.13 2009/03/07 17:58:02 fabiankeil Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32log.h,v $
- *
- * Purpose     :  Functions for creating and destroying the log window,
- *                ouputting strings, processing messages and so on.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2009 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 1999 Adam Lock
- *                <locka@xxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32log.h,v $
- *    Revision 1.13  2009/03/07 17:58:02  fabiankeil
- *    Fix two mingw32-only buffer overflows. Note that triggering
- *    them requires control over the configuration file in which
- *    case all bets are off anyway.
- *
- *    Revision 1.12  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.10.2.2  2002/11/20 14:39:05  oes
- *    Fixed compiler warning
- *
- *    Revision 1.10.2.1  2002/08/21 17:58:05  oes
- *    Temp kludge to let user and default action file be edited through win32 GUI (FR 592080)
- *
- *    Revision 1.10  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.9  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.8  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.7  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.6  2001/07/13 14:04:59  oes
- *    Removed all #ifdef PCRS
- *
- *    Revision 1.5  2001/06/07 23:08:12  jongfoster
- *    Forward and ACL edit options removed.
- *
- *    Revision 1.4  2001/05/31 21:37:11  jongfoster
- *    GUI changes to rename "permissions file" to "actions file".
- *
- *    Revision 1.3  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.2  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:07  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern HWND g_hwndLogFrame;
-
-/* Indicates whether task bar shows activity animation */
-extern BOOL g_bShowActivityAnimation;
-
-/* Indicates if the log window appears on the task bar */
-extern BOOL g_bShowOnTaskBar;
-
-/* Indicates whether closing the log window really just hides it */
-extern BOOL g_bCloseHidesWindow;
-
-/* Indicates if messages are logged at all */
-extern BOOL g_bLogMessages;
-
-/* Indicates whether log messages are highlighted */
-extern BOOL g_bHighlightMessages;
-
-/* Indicates if buffer is limited in size */
-extern BOOL g_bLimitBufferSize;
-
-/* Maximum number of lines allowed in buffer when limited */
-extern int g_nMaxBufferLines;
-
-/* Font to use */
-extern char g_szFontFaceName[32];
-
-/* Size of font to use */
-extern int g_nFontSize;
-
-
-/* FIXME: this is a kludge */
-
-extern const char * g_default_actions_file;
-extern const char * g_user_actions_file;
-extern const char * g_re_filterfile;
-#ifdef FEATURE_TRUST
-extern const char * g_trustfile;
-#endif /* def FEATURE_TRUST */
-
-/* FIXME: end kludge */
-
-extern HICON g_hiconApp;
-extern int LogPutString(const char *pszText);
-extern BOOL InitLogWindow(void);
-extern void TermLogWindow(void);
-extern void ShowLogWindow(BOOL bShow);
-extern void LogShowActivity(void);
-
-/* Revision control strings from this header and associated .c file */
-extern const char w32log_rcs[];
-extern const char w32log_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef W32LOG_H_INCLUDED */
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/w32res.h b/external/privoxy/w32res.h
deleted file mode 100644
index ecee2c3..0000000
--- a/external/privoxy/w32res.h
+++ /dev/null
@@ -1,194 +0,0 @@
-#ifndef W32RES_H_INCLUDED
-#define W32RES_H_INCLUDED
-#define W32RES_H_VERSION "$Id: w32res.h,v 1.17 2009/01/01 15:09:23 ler762 Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32res.h,v $
- *
- * Purpose     :  Identifiers for Windows GUI resources.
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Based on the Internet Junkbuster originally written
- *                by and Copyright (C) 1997 Anonymous Coders and 
- *                Junkbusters Corporation.  http://www.junkbusters.com
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32res.h,v $
- *    Revision 1.17  2009/01/01 15:09:23  ler762
- *    Change the Windows taskbar icon when privoxy is toggled off.
- *
- *    Revision 1.16  2008/11/02 14:37:47  ler762
- *    commit the part of the patches I've been using that were written by torford and gjmurphy
- *      [ 1824315 ] Minor code cleanup
- *      [ 1781135 ] Patch - Add clear log, select all, and Accelerators for w32
- *        http://sourceforge.net/tracker/?func=detail&atid=311118&aid=1781135&group_id=11118
- *    The full patch adds control keys A(select all), C(copy) and D(delete all) to the
- *    Privoxy log window menu.  Select all and copy work for me without the patch
- *    (albeit without showing the accelerator keys on the menu), so the only part of the
- *    patch I've been using for the last year or so has been the ctrl-d to delete
- *    everything in the Privoxy log window.
- *
- *    Revision 1.15  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.13.2.1  2002/08/21 17:59:06  oes
- *     - "Show Privoxy Window" now a toggle
- *     - Temp kludge to let user and default action file be edited through win32 GUI (FR 592080)
- *
- *    Revision 1.13  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.12  2002/03/24 12:07:36  jongfoster
- *    Consistern name for filters file
- *
- *    Revision 1.11  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.10  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.9  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.8  2001/07/13 14:04:59  oes
- *    Removed all #ifdef PCRS
- *
- *    Revision 1.7  2001/06/07 23:08:12  jongfoster
- *    Forward and ACL edit options removed.
- *
- *    Revision 1.6  2001/05/31 21:37:11  jongfoster
- *    GUI changes to rename "permissions file" to "actions file".
- *
- *    Revision 1.5  2001/05/29 09:50:24  jongfoster
- *    Unified blocklist/imagelist/permissionslist.
- *    File format is still under discussion, but the internal changes
- *    are (mostly) done.
- *
- *    Also modified interceptor behaviour:
- *    - We now intercept all URLs beginning with one of the following
- *      prefixes (and *only* these prefixes):
- *        * http://i.j.b/
- *        * http://ijbswa.sf.net/config/
- *        * http://ijbswa.sourceforge.net/config/
- *    - New interceptors "home page" - go to http://i.j.b/ to see it.
- *    - Internal changes so that intercepted and fast redirect pages
- *      are not replaced with an image.
- *    - Interceptors now have the option to send a binary page direct
- *      to the client. (i.e. ijb-send-banner uses this)
- *    - Implemented show-url-info interceptor.  (Which is why I needed
- *      the above interceptors changes - a typical URL is
- *      "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif";.
- *      The previous mechanism would not have intercepted that, and
- *      if it had been intercepted then it then it would have replaced
- *      it with an image.)
- *
- *    Revision 1.4  2001/05/26 01:26:34  jongfoster
- *    New #define, WIN_GUI_EDIT, enables the (embryonic) Win32 GUI editor.
- *    This #define cannot be set from ./configure - there's no point, it
- *    doesn't work yet.  See feature request # 425722
- *
- *    Revision 1.3  2001/05/26 00:28:36  jongfoster
- *    Automatic reloading of config file.
- *    Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- *    Most of the global variables have been moved to a new
- *    struct configuration_spec, accessed through csp->config->globalname
- *    Most of the globals remaining are used by the Win32 GUI.
- *
- *    Revision 1.2  2001/05/20 01:21:20  jongfoster
- *    Version 2.9.4 checkin.
- *    - Merged popupfile and cookiefile, and added control over PCRS
- *      filtering, in new "permissionsfile".
- *    - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- *      file error you now get a message box (in the Win32 GUI) rather
- *      than the program exiting with no explanation.
- *    - Made killpopup use the PCRS MIME-type checking and HTTP-header
- *      skipping.
- *    - Removed tabs from "config"
- *    - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- *    - Bumped up version number.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:08  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-#define IDR_TRAYMENU                      101
-#define IDI_IDLE                          102
-#define IDR_LOGVIEW                       103
-#define IDR_ACCELERATOR                   104
-#define IDR_POPUP_SELECTION               105
-
-
-#define IDI_MAINICON                      200
-#define IDI_ANIMATED1                     201
-#define IDI_ANIMATED2                     202
-#define IDI_ANIMATED3                     203
-#define IDI_ANIMATED4                     204
-#define IDI_ANIMATED5                     205
-#define IDI_ANIMATED6                     206
-#define IDI_ANIMATED7                     207
-#define IDI_ANIMATED8                     208
-#define IDI_OFF                           209
-
-#define ID_TOGGLE_SHOWWINDOW              4000
-#define ID_HELP_ABOUT                     4001
-#define ID_FILE_EXIT                      4002
-#define ID_VIEW_CLEARLOG                  4003
-#define ID_VIEW_LOGMESSAGES               4004
-#define ID_VIEW_MESSAGEHIGHLIGHTING       4005
-#define ID_VIEW_LIMITBUFFERSIZE           4006
-#define ID_VIEW_ACTIVITYANIMATION         4007
-#define ID_HELP_FAQ                       4008
-#define ID_HELP_MANUAL                    4009
-#define ID_HELP_GPL                       4010
-#define ID_HELP_STATUS                    4011
-#ifdef FEATURE_TOGGLE
-#define ID_TOGGLE_ENABLED                 4012
-#endif /* def FEATURE_TOGGLE */
-
-/* Break these out so they are easier to extend, but keep consecutive */
-#define ID_TOOLS_EDITCONFIG               5000
-#define ID_TOOLS_EDITDEFAULTACTIONS       5001
-#define ID_TOOLS_EDITUSERACTIONS          5002
-#define ID_TOOLS_EDITFILTERS              5003
-
-#ifdef FEATURE_TRUST
-#define ID_TOOLS_EDITTRUST                5004
-#endif /* def FEATURE_TRUST */
-
-#define ID_EDIT_COPY  30000
-
-
-#endif /* ndef W32RES_H_INCLUDED */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/w32svrapi.c b/external/privoxy/w32svrapi.c
deleted file mode 100644
index aed1232..0000000
--- a/external/privoxy/w32svrapi.c
+++ /dev/null
@@ -1,952 +0,0 @@
-const char w32_svrapi_rcs[] = "$Id: w32svrapi.c,v 1.2 2006/09/20 03:15:43 david__schmidt Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32svrapi.c,v $
- *
- * Purpose     :  Win32 Services API for Privoxy.
- *                Provides the implementation of an Win32 service to
- *                allow the code to directly register and run as a
- *                native Windows service application.
- *
- *                Since Win9x/ME platforms don't provide or support
- *                running programs as services, this code uses runtime
- *                loading and calling of the Win32 Service API, to
- *                prevent the possibility of getting "entry point not
- *                found" type errors on unsupported platforms. This adds
- *                a little more complexity to the code, but it is worth
- *                doing to provide that isolation.
- *
- * Copyright   :  Written by and Copyright (C) 2003, 2006 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 2003 Ian Cummings
- *                <ian_a_c@xxxxxxxxxxx>
- *
- *                Special thanks to Mates Dolák <matesek@xxxxxxx> for
- *                some very helpful feedback and suggestions during the
- *                development of this code.
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32svrapi.c,v $
- *    Revision 1.2  2006/09/20 03:15:43  david__schmidt
- *    Clean up a variable type declaration which just
- *    happened to work...
- *
- *    Revision 1.1  2006/08/12 03:54:37  david__schmidt
- *    Windows service integration
- *
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#ifdef _WIN32
-
-#include <stdio.h>
-
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-#include <process.h>
-
-#ifndef _WIN_CONSOLE
-#  include "w32log.h"
-#endif /* ndef _WIN_CONSOLE */
-
-#include "w32svrapi.h"
-const char w32_svrapi_h_rcs[] = W32_SVRAPI_H_VERSION;
-
-
-/* Only the ANSI Win32 APIs are used at this time. If for some
- * reason, we're building under unicode then we must stop
- */
-#ifdef UNICODE
-#error "Privoxy interface to Win32 Services only runs under ANSI builds. Unicode is not supported at present, but you can volunteer for the job if you like! :)"
-#endif
-
-
-/* Default to not running as service, unless the command line says so */
-BOOL bRunAsService = FALSE;
-
-/* According to the Win32 docs for CreateService,
- * the max length for the service name is 256 chars
- */
-char szThisServiceName[260];
-
-static BOOL get_service_description(const char *pszServiceName, char *pszDisplayName, DWORD dwDispSize);
-static void WINAPI privoxy_w32_service_start(DWORD dw, LPSTR* psz);
-static void WINAPI privoxy_w32_service_handler(DWORD dwOpcode);
-SERVICE_TABLE_ENTRY w32ServiceDispatchTable[] = {{"", privoxy_w32_service_start}, {NULL, NULL}};
-static SERVICE_STATUS_HANDLE hSrv_status = 0;
-static SERVICE_STATUS srv_status;
-
-
-
-/*********************************************************************
- * This function returns TRUE if we are running on an OS that can
- * support services, like NT, etc. It returns FALSE for Win9x/ME.
- *********************************************************************/
-static BOOL HasServiceControlManager()
-{
-   HMODULE     hDll;
-   FARPROC     pFunc;
-   SC_HANDLE   hScm;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      printf("Can't load Advapi32.dll -- LoadLibrary failed!\n");
-      return FALSE;
-   }
-
-   /* Get the address of the ANSI OpenSCManager function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "OpenSCManagerA");
-   if (pFunc == NULL)
-   {
-      printf("Can't find OpenSCManagerA -- GetProcAddress failed!\n");
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   /* Try and connect to the SCM. If it fails check and see if the error 
-    * code is ERROR_CALL_NOT_IMPLEMENTED, which means:
-    *    "This function is not supported on this system."
-    */
-   hScm = (SC_HANDLE)(*pFunc)(NULL, NULL, SC_MANAGER_CONNECT);
-   if (hScm == NULL)
-   {
-      DWORD dwErr = GetLastError();
-      if (dwErr == ERROR_CALL_NOT_IMPLEMENTED)
-      {
-         /* Expected error under Win9x/Me, so don't print any debug info
-          * here as we'll leave that up to the calling function to do
-          */
-         FreeLibrary(hDll);
-         return FALSE;
-      }
-
-      printf("Call to OpenSCManager failed -- GetLastError() returned %lu!\n", dwErr);
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   w32_close_service_handle(hScm);
-
-   /* OpenSCManager function exists and works, so we're on an NT type platform */
-   FreeLibrary(hDll);
-
-   return TRUE;
-
-} /* -END- HasServiceControlManager */
-
-
-BOOL CanSystemSupportServices()
-{
-   BOOL bHasScm = HasServiceControlManager();
-   return bHasScm;
-
-} /* -END- CanSystemSupportServices */
-
-
-
-/*********************************************************************
- *
- * The Service functions are defined in <winsvc.h> which is where
- * the declarations used in this file are taken from
- *
- *********************************************************************/ 
-
-
-/*********************************************************************
- * Open a connection to the service control manager
- *********************************************************************/ 
-SC_HANDLE w32_open_sc_manager(
-  LPCTSTR lpMachineName,   /* computer name */
-  LPCTSTR lpDatabaseName,  /* SCM database name */
-  DWORD dwDesiredAccess)   /* access type */
-{
-   HMODULE     hDll = NULL;
-   SC_HANDLE   hScm = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-
-   /* Load the DLL with the SCM functions or return failure */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return NULL;
-   }
-
-   /* Get the address of the ANSI OpenSCManager function, or return failure */
-   pFunc = GetProcAddress(hDll, "OpenSCManagerA");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return NULL;
-   }
-
-   /* Call the SCM function, and save the error code */
-   hScm = (SC_HANDLE)(*pFunc)(lpMachineName, lpDatabaseName, dwDesiredAccess);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-     
-   return hScm;
-
-} /* -END- w32_open_sc_manager */
-
-
-
-BOOL w32_close_service_handle(
-  SC_HANDLE hSCObject)   /* handle to service or SCM object */
-{
-   HMODULE     hDll = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-   BOOL        bRet;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return FALSE;
-   }
-
-   /* Get the address of the CloseServiceHandle function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "CloseServiceHandle");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   /* Close the handle, and save the error code */
-   bRet = (BOOL)(*pFunc)(hSCObject);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-
-   return bRet;
-
-} /* -END- w32_close_service_handle */
-
-
-
-/*********************************************************************
- * Open a service
- *********************************************************************/ 
-SC_HANDLE w32_open_service(
-  SC_HANDLE hSCManager,   /* handle to SCM database */
-  LPCTSTR lpServiceName,  /* service name */
-  DWORD dwDesiredAccess)  /* access */
-{
-   HMODULE     hDll = NULL;
-   SC_HANDLE   hSrv = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-
-   /* Load the DLL with the SCM functions or return failure */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return NULL;
-   }
-
-   /* Get the address of the ANSI OpenService function, or return failure */
-   pFunc = GetProcAddress(hDll, "OpenServiceA");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return NULL;
-   }
-
-   /* Call the SCM function, and save the error code */
-   hSrv = (SC_HANDLE)(*pFunc)(hSCManager, lpServiceName, dwDesiredAccess);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-     
-   return hSrv;
-
-} /* -END- w32_open_service */
-
-
-
-SC_HANDLE w32_create_service(
-  SC_HANDLE hSCManager,       /* handle to SCM database */
-  LPCTSTR lpServiceName,      /* name of service to start */
-  LPCTSTR lpDisplayName,      /* display name */
-  DWORD dwDesiredAccess,      /* type of access to service */
-  DWORD dwServiceType,        /* type of service */
-  DWORD dwStartType,          /* when to start service */
-  DWORD dwErrorControl,       /* severity of service failure */
-  LPCTSTR lpBinaryPathName,   /* name of binary file */
-  LPCTSTR lpLoadOrderGroup,   /* name of load ordering group */
-  LPDWORD lpdwTagId,          /* tag identifier */
-  LPCTSTR lpDependencies,     /* array of dependency names */
-  LPCTSTR lpServiceStartName, /* account name */
-  LPCTSTR lpPassword)         /* account password */
-{
-   HMODULE     hDll = NULL;
-   SC_HANDLE   hSrv = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-
-   /* Load the DLL with the SCM functions or return failure */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return NULL;
-   }
-
-   /* Get the address of the ANSI CreateService function, or return failure */
-   pFunc = GetProcAddress(hDll, "CreateServiceA");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return NULL;
-   }
-
-   /* Call the SCM function, and save the error code */
-   hSrv = (SC_HANDLE)(*pFunc)(hSCManager,          /* handle to SCM database */
-                              lpServiceName,       /* name of service to start */
-                              lpDisplayName,       /* display name */
-                              dwDesiredAccess,     /* type of access to service */
-                              dwServiceType,       /* type of service */
-                              dwStartType,         /* when to start service */
-                              dwErrorControl,      /* severity of service failure */
-                              lpBinaryPathName,    /* name of binary file */
-                              lpLoadOrderGroup,    /* name of load ordering group */
-                              lpdwTagId,           /* tag identifier */
-                              lpDependencies,      /* array of dependency names */
-                              lpServiceStartName,  /* account name */
-                              lpPassword);         /* account password */
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-     
-   return hSrv;
-
-} /* -END- w32_create_service */
-
-
-
-BOOL w32_delete_service(
-  SC_HANDLE hService)   /* handle to service */
-{
-   HMODULE     hDll = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-   BOOL        bRet;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return FALSE;
-   }
-
-   /* Get the address of the DeleteService function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "DeleteService");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   /* Close the handle, and save the error code */
-   bRet = (BOOL)(*pFunc)(hService);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-
-   return bRet;
-
-} /* -END- w32_delete_service */
-
-
-
-BOOL w32_query_service_config(
-  SC_HANDLE hService,                     /* handle to service */
-  LPQUERY_SERVICE_CONFIG lpServiceConfig, /* buffer */
-  DWORD cbBufSize,                        /* size of buffer */
-  LPDWORD pcbBytesNeeded)                 /* bytes needed */
-{
-   HMODULE     hDll = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-   BOOL        bRet;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return FALSE;
-   }
-
-   /* Get the address of the QueryServiceConfig function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "QueryServiceConfigA");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   /* Close the handle, and save the error code */
-   bRet = (BOOL)(*pFunc)(hService, lpServiceConfig, cbBufSize, pcbBytesNeeded);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-
-   return bRet;
-
-} /* -END- w32_query_service_config */
-
-
-BOOL w32_start_service_ctrl_dispatcher(
-  CONST LPSERVICE_TABLE_ENTRY lpServiceTable)   /* service table */
-{
-   HMODULE     hDll = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-   BOOL        bRet;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return FALSE;
-   }
-
-   /* Get the address of the StartServiceCtrlDispatcher function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "StartServiceCtrlDispatcherA");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   /* Close the handle, and save the error code */
-   bRet = (BOOL)(*pFunc)(lpServiceTable);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-
-   return bRet;
-
-} /* -END- w32_start_service_ctrl_dispatcher */
-
-
-
-SERVICE_STATUS_HANDLE w32_register_service_ctrl_handler(
-  LPCTSTR lpServiceName,               /* service name */
-  LPHANDLER_FUNCTION lpHandlerProc)    /* handler function */
-{
-   HMODULE     hDll = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-   SERVICE_STATUS_HANDLE hServStat = (SERVICE_STATUS_HANDLE)0;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return hServStat;
-   }
-
-   /* Get the address of the RegisterServiceCtrlHandler function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "RegisterServiceCtrlHandlerA");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return hServStat;
-   }
-
-   /* Close the handle, and save the error code */
-   hServStat = (SERVICE_STATUS_HANDLE)(*pFunc)(lpServiceName, lpHandlerProc);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-
-   return hServStat;
-
-} /* -END- w32_register_service_ctrl_handler */
-
-
-
-BOOL w32_set_service_status(
-  SERVICE_STATUS_HANDLE hServiceStatus,   /* service status handle */
-  LPSERVICE_STATUS lpServiceStatus)       /* status buffer */
-{
-   HMODULE     hDll = NULL;
-   FARPROC     pFunc = NULL;
-   DWORD       dwLastErr = 0;
-   BOOL        bRet;
-
-   /* Load the DLL with the SCM functions or return a failure status */
-   hDll = LoadLibrary("Advapi32.dll");
-   if (hDll == NULL)
-   {
-      return FALSE;
-   }
-
-   /* Get the address of the SetServiceStatus function, or return a failure status */
-   pFunc = GetProcAddress(hDll, "SetServiceStatus");
-   if (pFunc == NULL)
-   {
-      FreeLibrary(hDll);
-      return FALSE;
-   }
-
-   /* Close the handle, and save the error code */
-   bRet = (BOOL)(*pFunc)(hServiceStatus, lpServiceStatus);
-   dwLastErr = GetLastError();
-
-   /* Release the library and then restore the last error
-    * code, in case FreeLibrary altered it.
-    */
-   FreeLibrary(hDll);
-   SetLastError(dwLastErr);
-
-   return bRet;
-
-} /* -END- w32_set_service_status */
-
-
-static void display_win32_msg(BOOL bIsError, char *msg)
-{
-#ifdef _WIN_CONSOLE
-   printf("%s", msg);
-#else
-   if (bIsError)
-   {
-      MessageBox(NULL, msg, "Privoxy Error", 
-         MB_OK | MB_ICONERROR | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST);
-   }
-   else
-   {
-      MessageBox(NULL, msg, "Privoxy Information", 
-         MB_OK | MB_ICONINFORMATION | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST);
-   }
-#endif
-
-} /* -END- display_win32_msg */
-
-
-static BOOL get_service_description(const char *pszServiceName, char *pszDisplayName, DWORD dwDispSize)
-{
-   /*********************************************************************
-    * Create a simple display name
-    *********************************************************************/
-   strcpy(pszDisplayName, "Privoxy (");
-   strncat(pszDisplayName, pszServiceName, dwDispSize - strlen(pszDisplayName) - 2);
-   strcat(pszDisplayName, ")");
-
-   return TRUE;
-}
-
-
-
-BOOL install_service(const char *service_name)
-{
-   char szModule[(MAX_PATH*2)+1];
-   char szDisplayName[MAX_PATH+2];
-   SC_HANDLE hSCM;
-   SC_HANDLE hService;
-
-   /*********************************************************************
-    * First check if this system can support a service architecture
-    *********************************************************************/
-   if (!CanSystemSupportServices())
-   {
-      display_win32_msg(TRUE, "This system doesn't support installing Privoxy as a service.\nWinNT/2000/XP are required for this feature.\n");
-      return FALSE;
-   }
-
-   /* Use a default service name if none was supplied */
-   if ((service_name == NULL) || (strlen(service_name) == 0))
-   {
-      service_name = "privoxy";
-   }
-
-   /*********************************************************************
-    * Open a handle to the Service Control Manager with full access rights
-    *********************************************************************/
-   hSCM = w32_open_sc_manager(NULL, NULL, SC_MANAGER_ALL_ACCESS);
-   if (hSCM == NULL)
-   {
-      display_win32_msg(TRUE, "Can't open Service Control Manager - Service install failed!\n  Administrator rights are required to create a service.\n");
-      return FALSE;
-   }
-
-
-   /*********************************************************************
-    * Work out the full image path plus command line for the service
-    * We'll temporarily use szDisplayName as a second buffer.
-    *********************************************************************/
-   GetModuleFileName(NULL, szDisplayName, MAX_PATH);
-   sprintf(szModule, "\"%s\" --service", szDisplayName); 
-
-   
-   /*********************************************************************
-    * Get the display name for the service
-    *********************************************************************/
-   get_service_description(service_name, szDisplayName, sizeof(szDisplayName)/sizeof(char));
-
-
-   /*********************************************************************
-    * Create the service
-    *********************************************************************/
-   hService = w32_create_service(hSCM, 
-                           service_name,              /* the internal service name */
-                           szDisplayName,             /* the display name */
-                           SERVICE_ALL_ACCESS,        /* get full access during creation */
-                           SERVICE_WIN32_OWN_PROCESS  /* run in our own process */
-#ifndef _WIN_CONSOLE
-                         + SERVICE_INTERACTIVE_PROCESS /* GUI also wants interactive rights */
-#endif
-                           ,
-                           SERVICE_DEMAND_START,      /* For now, only start when asked to */
-                           SERVICE_ERROR_NORMAL,      /* Normal error handling by the SCM */
-                           szModule,                  /* The executable service file */
-                           NULL,                      /* No load order info needed */
-                           NULL,                      /* No load order info needed */
-                           NULL,                      /* No dependencies */
-                           NULL,                      /* Default to LocalSystem... */
-                           NULL);                     /* ...which doesn't require a password */
-   if (hService == NULL)
-   {
-      display_win32_msg(TRUE, "Can't install service!\n");
-      w32_close_service_handle(hSCM);
-      return FALSE;
-   }
-
-   display_win32_msg(FALSE, "Service was successfully created.\n*** IMPORTANT NOTE: You should now use the Services control panel to\n*** configure the startup type and user account details for the service.\n\n");
-
-   /* tidy up */
-   w32_close_service_handle(hService);
-   w32_close_service_handle(hSCM);
-   return TRUE;
-
-} /* -END- install_service */
-
-
-
-BOOL uninstall_service(const char *service_name)
-{
-   char szDisplayName[MAX_PATH+2];
-   SC_HANDLE hSCM;
-   SC_HANDLE hService;
-   BOOL bResult = FALSE;
-
-
-   /*********************************************************************
-    * First check if this system can support a service architecture
-    *********************************************************************/
-   if (!CanSystemSupportServices())
-   {
-      display_win32_msg(TRUE, "This system doesn't support installing Privoxy as a service.\nWinNT/2000/XP are required for this feature.\n");
-      return FALSE;
-   }
-
-
-   /* Use a default service name if none was supplied */
-   if ((service_name == NULL) || (strlen(service_name) == 0))
-   {
-      service_name = "privoxy";
-   }
-
-
-   /*********************************************************************
-    * Open a handle to the Service Control Manager with full access rights
-    *********************************************************************/
-   hSCM = w32_open_sc_manager(NULL, NULL, SC_MANAGER_ALL_ACCESS);
-   if (hSCM == NULL)
-   {
-      display_win32_msg(TRUE, "Can't open Service Control Manager - Service uninstall failed!\n  Administrator rights are required to delete a service.\n");
-      return FALSE;
-   }
-
-
-   /*********************************************************************
-    * Get the display name for the service
-    *********************************************************************/
-   get_service_description(service_name, szDisplayName, sizeof(szDisplayName)/sizeof(char));
-
-
-   /*********************************************************************
-    * Open and then delete the service
-    *********************************************************************/
-   hService = w32_open_service(hSCM, service_name, DELETE);
-   if (hService == NULL)
-   {
-      display_win32_msg(TRUE, "Can't open service for delete access rights!\n");
-      w32_close_service_handle(hSCM);
-      return FALSE;
-   }
-
-   if (w32_delete_service(hService))
-   {
-      display_win32_msg(FALSE, "Service was deleted successfully.\n");
-      bResult = TRUE;
-   }
-   else
-   {
-      display_win32_msg(TRUE, "Service could not be deleted!\n");
-      bResult = FALSE;
-   }
-
-   w32_close_service_handle(hService);
-   w32_close_service_handle(hSCM);
-   return bResult;
-
-} /* -END- uninstall_service */
-
-
-
-/*********************************************************************
- *
- * Function    :  privoxy_w32_service_start
- *
- * Description :  This is the entry point function for the service.
- *                In other words, it's the ServiceMain function.
- *
- * Parameters  :  Defined by the Win32 API, but not used here
- *
- * Returns     :  void
- *
- *********************************************************************/
-static void WINAPI privoxy_w32_service_start(DWORD dw, LPSTR* pszArgs)
-{
-   int child_id;
-
-   /* Arg zero is always the service name, and we need to 
-    * know it when we call RegisterServiceCtrlHandler.
-    */
-   strcpy(szThisServiceName, pszArgs[0]);
-
-   /* Tell the SCM we are running */
-   srv_status.dwServiceType = SERVICE_WIN32_OWN_PROCESS;
-   srv_status.dwCurrentState = SERVICE_RUNNING;
-   srv_status.dwCheckPoint = 0;
-   srv_status.dwControlsAccepted = SERVICE_ACCEPT_STOP;
-   srv_status.dwWin32ExitCode = NO_ERROR;
-   srv_status.dwServiceSpecificExitCode = 0;
-   srv_status.dwWaitHint = 0;
-
-   hSrv_status = w32_register_service_ctrl_handler(szThisServiceName, privoxy_w32_service_handler);
-   if (!hSrv_status)
-   {
-      return;
-   }
-   w32_set_service_status(hSrv_status, &srv_status);
-
-#ifndef FEATURE_PTHREAD
-   child_id = _beginthread(w32_service_listen_loop, 0, NULL);
-   if (child_id > 0)
-#else
-#error "FIXME: Do pthread stuff here!"
-#endif
-   {
-      w32_set_service_status(hSrv_status, &srv_status);
-   }
-   else
-   {
-      srv_status.dwCurrentState = SERVICE_STOPPED;
-      srv_status.dwCheckPoint = 0;
-      srv_status.dwWin32ExitCode = ERROR_SERVICE_SPECIFIC_ERROR;
-      srv_status.dwServiceSpecificExitCode = ERROR_SERVICE_NO_THREAD;
-      w32_set_service_status(hSrv_status, &srv_status);
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  w32_set_service_cwd
- *
- * Description :  Simple function to change the current directory to
- *                the same location as the service executable.
- *
- * Parameters  :  void
- *
- * Returns     :  void
- *
- *********************************************************************/
-void w32_set_service_cwd(void)
-{
-   char exe_name[MAX_PATH+1];
-   char dir_name[MAX_PATH+1];
-   char *pszFile = NULL;
-
-   /* Get the exe name and path of the service */
-   if (GetModuleFileName(NULL, exe_name, MAX_PATH))
-   {
-      /* Ask the API to tell us where the filename portion starts */
-      if (GetFullPathName(exe_name, MAX_PATH, dir_name, &pszFile))
-      {
-         /* remove the filename from the string */
-         if (pszFile != NULL)
-         {
-            *pszFile = '\0';
-            /* We have just a directory path now, so make it current */
-            SetCurrentDirectory(dir_name);
-         }
-      }
-   }
-}
-
-
-/*********************************************************************
- *
- * Function    :  w32_service_exit_notify
- *
- * Description :  This is a simple atexit function that is called by the
- *                C runtime after exit has been called. It allows the
- *                service code to detect when the app is about to die and
- *                send an quick notification to the SCM that the service
- *                now stopped.
- *
- * Parameters  :  void
- *
- * Returns     :  void
- *
- *********************************************************************/
-void w32_service_exit_notify(void)
-{
-   if (hSrv_status != 0)
-   {
-      if (srv_status.dwCurrentState != SERVICE_STOPPED)
-      {
-         srv_status.dwCurrentState = SERVICE_STOPPED;
-         srv_status.dwCheckPoint = 0;
-         srv_status.dwWin32ExitCode = ERROR_SERVICE_SPECIFIC_ERROR;
-         srv_status.dwServiceSpecificExitCode = ERROR_PROCESS_ABORTED;
-         w32_set_service_status(hSrv_status, &srv_status);
-      }
-   }
-}
-
-
-static void w32_mini_exit(void *p)
-{
-   Sleep(100);
-#ifdef _WIN_CONSOLE
-   exit(0);
-#else
-   PostMessage(g_hwndLogFrame, WM_CLOSE, 0, 0);
-#endif /* def _WIN_CONSOLE */
-}
-
-
-/*********************************************************************
- *
- * Function    :  privoxy_w32_service_handler
- *
- * Description :  This is the control message handler function for
- *                the service.
- *
- * Parameters  :  dwOpcode
- *                   requested control code sent by SCM
- *
- * Returns     :  void
- *
- *********************************************************************/
-static void WINAPI privoxy_w32_service_handler(DWORD dwOpcode)
-{
-   switch(dwOpcode)
-   {
-      case SERVICE_CONTROL_STOP:
-         /* We've stopped
-          */
-         srv_status.dwCurrentState = SERVICE_STOPPED;
-         srv_status.dwCheckPoint = 0;
-         srv_status.dwWin32ExitCode = NO_ERROR;
-         srv_status.dwServiceSpecificExitCode = 0;
-
-         /* Maybe there is a more friendly way to stop, but this will do for now! */
-         w32_set_service_status(hSrv_status, &srv_status);
-
-         /* During testing, I kept getting error 109 (ERROR_BROKEN_PIPE) and
-          * as far as the SCM was concerned the service was still stopping,
-          * even after the process had disappeared.
-          *
-          * It seems that if we call exit in the ServiceMain thread, it causes
-          * the SCM to not recieve the status we sent in the line above. The
-          * simple fix was to create a new thread to actually call exit for us
-          * whilst this thread continues and returns to its caller.
-          */
-
-         if (_beginthread(w32_mini_exit, 0, NULL) < 0)
-         {
-            /* we failed to create the exit thread, so just force an exit here
-             * and the SCM will just have to go and whistle!
-             */
-            exit(0);
-         }
-         break;
-
-      default:
-         break;
-   }
-
-   w32_set_service_status(hSrv_status, &srv_status);
-}
-
-
-#endif /* ifdef _WIN32 */
-
diff --git a/external/privoxy/w32svrapi.h b/external/privoxy/w32svrapi.h
deleted file mode 100644
index 48a6d8d..0000000
--- a/external/privoxy/w32svrapi.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef W32_SVRAPI_H_INCLUDED
-#define W32_SVRAPI_H_INCLUDED
-#define W32_SVRAPI_H_VERSION "$Id: w32svrapi.h,v 1.1 2006/08/12 03:54:37 david__schmidt Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32svrapi.h,v $
- *
- * Purpose     :  Win32 Services API for Privoxy.
- *                Provides the implementation of an Win32 service to
- *                allow the code to directly register and run as a
- *                native Windows service application.
- *
- *                Since Win9x/ME platforms don't provide or support
- *                running programs as services, this code uses runtime
- *                loading and calling of the Win32 Service API, to
- *                prevent the possibility of getting "entry point not
- *                found" type errors on unsupported platforms. This adds
- *                a little more complexity to the code, but it is worth
- *                doing to provide that isolation.
- *
- * Copyright   :  Written by and Copyright (C) 2003 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 2003 Ian Cummings
- *                <ian_a_c@xxxxxxxxxxx>
- *
- *                Special thanks to Mates Dolák <matesek@xxxxxxx> for
- *                some very helpful feedback and suggestions during the
- *                development of this code.
- *
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32svrapi.h,v $
- *    Revision 1.1  2006/08/12 03:54:37  david__schmidt
- *    Windows service integration
- *
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef _WIN32
-
-
-extern char szThisServiceName[];
-extern BOOL bRunAsService;
-extern SERVICE_TABLE_ENTRY w32ServiceDispatchTable[];
-
-extern BOOL install_service(const char *service_name);
-extern BOOL uninstall_service(const char *service_name);
-extern void w32_service_exit_notify(void);
-extern void w32_set_service_cwd(void);
-extern void w32_service_listen_loop(void *p);
-
-
-extern BOOL CanSystemSupportServices();
-
-
-extern SC_HANDLE w32_open_sc_manager(
-  LPCTSTR lpMachineName,   /* computer name */
-  LPCTSTR lpDatabaseName,  /* SCM database name */
-  DWORD dwDesiredAccess);  /* access type */
-
-
-extern BOOL w32_close_service_handle(
-  SC_HANDLE hSCObject);    /* handle to service or SCM object */
-
-
-extern SC_HANDLE w32_open_service(
-  SC_HANDLE hSCManager,    /* handle to SCM database */
-  LPCTSTR lpServiceName,   /* service name */
-  DWORD dwDesiredAccess);  /* access */
-
-
-extern SC_HANDLE w32_create_service(
-  SC_HANDLE hSCManager,       /* handle to SCM database */
-  LPCTSTR lpServiceName,      /* name of service to start */
-  LPCTSTR lpDisplayName,      /* display name */
-  DWORD dwDesiredAccess,      /* type of access to service */
-  DWORD dwServiceType,        /* type of service */
-  DWORD dwStartType,          /* when to start service */
-  DWORD dwErrorControl,       /* severity of service failure */
-  LPCTSTR lpBinaryPathName,   /* name of binary file */
-  LPCTSTR lpLoadOrderGroup,   /* name of load ordering group */
-  LPDWORD lpdwTagId,          /* tag identifier */
-  LPCTSTR lpDependencies,     /* array of dependency names */
-  LPCTSTR lpServiceStartName, /* account name */
-  LPCTSTR lpPassword);        /* account password */
-
-
-extern BOOL w32_delete_service(
-  SC_HANDLE hService);   /* handle to service */
-
-
-extern BOOL w32_query_service_config(
-  SC_HANDLE hService,                     /* handle to service */
-  LPQUERY_SERVICE_CONFIG lpServiceConfig, /* buffer */
-  DWORD cbBufSize,                        /* size of buffer */
-  LPDWORD pcbBytesNeeded);                /* bytes needed */
-
-
-extern BOOL w32_start_service_ctrl_dispatcher(
-  CONST LPSERVICE_TABLE_ENTRY lpServiceTable);   /* service table */
-
-
-extern SERVICE_STATUS_HANDLE w32_register_service_ctrl_handler(
-  LPCTSTR lpServiceName,               /* service name */
-  LPHANDLER_FUNCTION lpHandlerProc);   /* handler function */
-
-
-extern BOOL w32_set_service_status(
-  SERVICE_STATUS_HANDLE hServiceStatus,   /* service status handle */
-  LPSERVICE_STATUS lpServiceStatus);      /* status buffer */
-
-
-#endif  /* def _WIN32 */
-
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef W32_SVRAPI_H_INCLUDED */
-  
diff --git a/external/privoxy/w32taskbar.c b/external/privoxy/w32taskbar.c
deleted file mode 100644
index 079e45e..0000000
--- a/external/privoxy/w32taskbar.c
+++ /dev/null
@@ -1,313 +0,0 @@
-const char w32taskbar_rcs[] = "$Id: w32taskbar.c,v 1.10 2006/09/23 13:26:38 roro Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32taskbar.c,v $
- *
- * Purpose     :  Functions for creating, setting and destroying the
- *                workspace tray icon
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 1999 Adam Lock
- *                <locka@xxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32taskbar.c,v $
- *    Revision 1.10  2006/09/23 13:26:38  roro
- *    Replace TABs by spaces in source code.
- *
- *    Revision 1.9  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.7.2.2  2003/03/19 21:27:42  gliptak
- *    Corrected compilation error/typo
- *
- *    Revision 1.7.2.1  2002/11/20 14:39:32  oes
- *    Applied patch by Mattes Dolak which adds re-creation of the win32 taskbar
- *    icon on reception of the "TaskbarCreated" window message.
- *
- *    Revision 1.7  2002/03/31 17:19:00  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.6  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.5  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.4  2001/11/16 00:46:31  jongfoster
- *    Fixing compiler warnings
- *
- *    Revision 1.3  2001/05/22 18:56:28  oes
- *    CRLF -> LF
- *
- *    Revision 1.2  2001/05/20 15:07:54  jongfoster
- *    File is now ignored if _WIN_CONSOLE is defined.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:08  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#include <stdio.h>
-
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-
-#include "w32taskbar.h"
-#include "w32res.h"
-#include "w32log.h"
-
-const char w32taskbar_h_rcs[] = W32TASKBAR_H_VERSION;
-
-#ifndef _WIN_CONSOLE /* entire file */
-
-#define WM_TRAYMSG WM_USER+1
-
-static HMENU g_hmenuTray;
-static HWND g_hwndTrayX;
-static UINT g_traycreatedmsg;
-
-static LRESULT CALLBACK TrayProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam);
-
-
-/*********************************************************************
- *
- * Function    :  CreateTrayWindow
- *
- * Description :  Creates and returns the invisible window responsible
- *                for processing tray messages.
- *
- * Parameters  :
- *          1  :  hInstance = instance handle of this application
- *
- * Returns     :  Handle of the systray window.
- *
- *********************************************************************/
-HWND CreateTrayWindow(HINSTANCE hInstance)
-{
-   WNDCLASS wc;
-   static const char *szWndName = "PrivoxyTrayWindow";
-
-   wc.style          = 0;
-   wc.lpfnWndProc    = TrayProc;
-   wc.cbClsExtra     = 0;
-   wc.cbWndExtra     = 0;
-   wc.hInstance      = hInstance;
-   wc.hIcon          = 0;
-   wc.hCursor        = 0;
-   wc.hbrBackground  = 0;
-   wc.lpszMenuName   = 0;
-   wc.lpszClassName  = szWndName;
-
-   RegisterClass(&wc);
-
-   /* TaskbarCreated is sent to a window when it should re-add its tray icons */
-   g_traycreatedmsg = RegisterWindowMessage("TaskbarCreated");
-
-   g_hwndTrayX = CreateWindow(szWndName, szWndName,
-      WS_OVERLAPPEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT,
-      CW_USEDEFAULT, NULL, NULL, hInstance, NULL );
-
-   ShowWindow(g_hwndTrayX, SW_HIDE);
-   UpdateWindow(g_hwndTrayX);
-
-   g_hmenuTray = LoadMenu(hInstance, MAKEINTRESOURCE(IDR_TRAYMENU));
-
-   return g_hwndTrayX;
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  TraySetIcon
- *
- * Description :  Sets the tray icon to the specified shape.
- *
- * Parameters  :
- *          1  :  hwnd = handle of the systray window
- *          2  :  uID = user message number to notify systray window
- *          3  :  hicon = set the current icon to this handle
- *
- * Returns     :  Same value as `Shell_NotifyIcon'.
- *
- *********************************************************************/
-BOOL TraySetIcon(HWND hwnd, UINT uID, HICON hicon)
-{
-   NOTIFYICONDATA nid;
-
-   memset(&nid, 0, sizeof(nid));
-
-   nid.cbSize = sizeof(nid);
-   nid.hWnd = hwnd;
-   nid.uID = uID;
-   nid.uFlags = NIF_ICON;
-   nid.uCallbackMessage = 0;
-   nid.hIcon = hicon;
-
-   return( Shell_NotifyIcon(NIM_MODIFY, &nid) );
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  TrayAddIcon
- *
- * Description :  Adds a tray icon.
- *
- * Parameters  :
- *          1  :  hwnd = handle of the systray window
- *          2  :  uID = user message number to notify systray window
- *          3  :  hicon = handle of icon to add to systray window
- *          4  :  pszToolTip = tool tip when mouse hovers over systray window
- *
- * Returns     :  Same as `Shell_NotifyIcon'.
- *
- *********************************************************************/
-BOOL TrayAddIcon(HWND hwnd, UINT uID, HICON hicon, const char *pszToolTip)
-{
-   NOTIFYICONDATA nid;
-
-   memset(&nid, 0, sizeof(nid));
-
-   nid.cbSize = sizeof(nid);
-   nid.hWnd = hwnd;
-   nid.uID = uID;
-   nid.uFlags = NIF_MESSAGE | NIF_ICON | NIF_TIP;
-   nid.uCallbackMessage = WM_TRAYMSG;
-   nid.hIcon = hicon;
-
-   if (pszToolTip)
-   {
-      strcpy(nid.szTip, pszToolTip);
-   }
-
-   return( Shell_NotifyIcon(NIM_ADD, &nid) );
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  TrayDeleteIcon
- *
- * Description :  Deletes a tray icon.
- *
- * Parameters  :
- *          1  :  hwnd = handle of the systray window
- *          2  :  uID = user message number to notify systray window
- *
- * Returns     :  Same as `Shell_NotifyIcon'.
- *
- *********************************************************************/
-BOOL TrayDeleteIcon(HWND hwnd, UINT uID)
-{
-   NOTIFYICONDATA nid;
-
-   memset(&nid, 0, sizeof(nid));
-
-   nid.cbSize = sizeof(nid);
-   nid.hWnd = hwnd;
-   nid.uID = uID;
-
-   return( Shell_NotifyIcon(NIM_DELETE, &nid) );
-
-}
-
-
-/*********************************************************************
- *
- * Function    :  TrayProc
- *
- * Description :  Call back procedure processes tray messages.
- *
- * Parameters  :
- *          1  :  hwnd = handle of the systray window
- *          2  :  msg = message number
- *          3  :  wParam = first param for this message
- *          4  :  lParam = next param for this message
- *
- * Returns     :  Appropriate M$ window message handler codes.
- *
- *********************************************************************/
-LRESULT CALLBACK TrayProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam)
-{
-   switch (msg)
-   {
-      case WM_CREATE:
-         return 0;
-
-      case WM_CLOSE:
-         PostQuitMessage(0);
-         return 0;
-
-      case WM_TRAYMSG:
-      {
-         /* UINT uID = (UINT) wParam; */
-         UINT uMouseMsg = (UINT) lParam;
-
-         if (uMouseMsg == WM_RBUTTONDOWN)
-         {
-            POINT pt;
-            HMENU hmenu = GetSubMenu(g_hmenuTray,0);
-            GetCursorPos(&pt);
-            SetForegroundWindow(g_hwndLogFrame);
-            TrackPopupMenu(hmenu, TPM_LEFTALIGN | TPM_TOPALIGN, pt.x, pt.y, 0, g_hwndLogFrame, NULL);
-            PostMessage(g_hwndLogFrame, WM_NULL, 0, 0 ) ;
-         }
-         else if (uMouseMsg == WM_LBUTTONDBLCLK)
-         {
-            ShowLogWindow(TRUE);
-         }
-      }
-      return 0;
-
-      default:
-
-         if (msg == g_traycreatedmsg)
-         {
-            TrayAddIcon(g_hwndTrayX, 1, g_hiconApp, "Privoxy");
-         }
-         break;
-   }
-
-   return DefWindowProc(hwnd, msg, wParam, lParam);
-
-}
-
-
-#endif /* ndef _WIN_CONSOLE - entire file */
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/w32taskbar.h b/external/privoxy/w32taskbar.h
deleted file mode 100644
index 7ea7588..0000000
--- a/external/privoxy/w32taskbar.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef W32TASKBAR_H_INCLUDED
-#define W32TASKBAR_H_INCLUDED
-#define W32TASKBAR_H_VERSION "$Id: w32taskbar.h,v 1.6 2006/07/18 14:48:48 david__schmidt Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/w32taskbar.h,v $
- *
- * Purpose     :  Functions for creating, setting and destroying the
- *                workspace tray icon
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 1999 Adam Lock
- *                <locka@xxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: w32taskbar.h,v $
- *    Revision 1.6  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.4  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.3  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.2  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:08  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern HWND CreateTrayWindow(HINSTANCE hInstance);
-extern BOOL TrayAddIcon(HWND hwnd, UINT uID, HICON hicon, const char *pszToolTip);
-extern BOOL TraySetIcon(HWND hwnd, UINT uID, HICON hicon);
-extern BOOL TrayDeleteIcon(HWND hwnd, UINT uID);
-
-/* Revision control strings from this header and associated .c file */
-extern const char w32taskbar_rcs[];
-extern const char w32taskbar_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef W32TASKBAR_H_INCLUDED */
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/win32.c b/external/privoxy/win32.c
deleted file mode 100644
index 3aedd53..0000000
--- a/external/privoxy/win32.c
+++ /dev/null
@@ -1,366 +0,0 @@
-const char win32_rcs[] = "$Id: win32.c,v 1.15 2009/02/09 19:16:35 fabiankeil Exp $";
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/win32.c,v $
- *
- * Purpose     :  Win32 User Interface initialization and message loop
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 1999 Adam Lock
- *                <locka@xxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: win32.c,v $
- *    Revision 1.15  2009/02/09 19:16:35  fabiankeil
- *    Bump copyright year in win32_blurb[].
- *
- *    Revision 1.14  2008/03/02 18:15:41  fabiankeil
- *    Update copyright year in win32_blurb[].
- *
- *    Revision 1.13  2007/01/31 16:25:24  fabiankeil
- *    Update copyright range for the About message.
- *
- *    Revision 1.12  2006/08/12 03:54:37  david__schmidt
- *    Windows service integration
- *
- *    Revision 1.11  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.9.2.2  2002/08/27 18:03:40  oes
- *    Fixed stupid typo
- *
- *    Revision 1.9.2.1  2002/08/21 17:59:27  oes
- *    Sync win32_blurb[] with our standard blurb
- *
- *    Revision 1.9  2002/03/31 17:19:00  jongfoster
- *    Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- *    Revision 1.8  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.7  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.6  2002/03/16 21:53:28  jongfoster
- *    VC++ Heap debug option
- *
- *    Revision 1.5  2002/03/04 23:47:30  jongfoster
- *    - Rewritten, simpler command-line pre-parser
- *    - not using raise(SIGINT) any more
- *
- *    Revision 1.4  2001/11/30 21:29:33  jongfoster
- *    Fixing a warning
- *
- *    Revision 1.3  2001/11/16 00:46:31  jongfoster
- *    Fixing compiler warnings
- *
- *    Revision 1.2  2001/07/29 19:32:00  jongfoster
- *    Renaming _main() [mingw32 only] to real_main(), for ANSI compliance.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:08  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#include "config.h"
-
-#ifdef _WIN32
-
-#include <stdio.h>
-
-#include "project.h"
-#include "jcc.h"
-#include "miscutil.h"
-
-/* Uncomment this if you want to build Win32 as a console app */
-/* #define _WIN_CONSOLE */
-
-#ifndef STRICT
-#define STRICT
-#endif
-#include <windows.h>
-
-#include <stdarg.h>
-#include <process.h>
-
-#if defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG)
-/* Visual C++ Heap debugging */
-#include <crtdbg.h>
-#endif /* defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG) */
-
-#include "win32.h"
-
-const char win32_h_rcs[] = WIN32_H_VERSION;
-
-/**
- * A short introductory text about Privoxy.  Used for the "About" box
- * or the console startup message.
- */
-const char win32_blurb[] =
-"Privoxy version " VERSION " for Windows\n"
-"Copyright (C) 2000-2009 the Privoxy Team (" HOME_PAGE_URL ")\n"
-"Based on the Internet Junkbuster by Junkbusters Corp.\n"
-"This is free software; it may be used and copied under the\n"
-"GNU General Public License: http://www.gnu.org/copyleft/gpl.html .\n"
-"This program comes with ABSOLUTELY NO WARRANTY OF ANY KIND.\n";
-
-#ifdef _WIN_CONSOLE
-
-/**
- * Hide the console.  If set, the program will disconnect from the 
- * console and run in the background.  This allows the command-prompt
- * window to close.
- */
-int hideConsole     = 0;
-
-
-#else /* ndef _WIN_CONSOLE */
-
-
-/**
- * The application instance handle.
- */
-HINSTANCE g_hInstance;
-
-
-/**
- * The command to show the window that was specified at startup.
- */
-int g_nCmdShow;
-
-static void  __cdecl UserInterfaceThread(void *);
-
-
-#endif /* ndef _WIN_CONSOLE */
-
-/*********************************************************************
- *
- * Function    :  WinMain
- *
- * Description :  M$ Windows "main" routine:
- *                parse the `lpCmdLine' param into main's argc and argv variables,
- *                start the user interface thread (for the systray window), and
- *                call main (i.e. patch execution into normal startup).
- *
- * Parameters  :
- *          1  :  hInstance = instance handle of this execution
- *          2  :  hPrevInstance = instance handle of previous execution
- *          3  :  lpCmdLine = command line string which started us
- *          4  :  nCmdShow = window show value (MIN, MAX, NORMAL, etc...)
- *
- * Returns     :  `main' never returns, so WinMain will also never return.
- *
- *********************************************************************/
-int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow)
-{
-#if 0   /* See comment about __argc & __argv below */
-   int i;
-   int argc = 1;
-   const char *argv[3];
-   char szModule[MAX_PATH+1];
-#endif
-
-   int res;
-#ifndef _WIN_CONSOLE
-   HANDLE hInitCompleteEvent = NULL;
-#endif
-
-
-#if defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG)
-#if 0
-   /* Visual C++ Heap debugging */
-
-   /* Get current flag*/
-   int tmpFlag = _CrtSetDbgFlag( _CRTDBG_REPORT_FLAG );
-
-   /* Turn on leak-checking bit */
-   tmpFlag |= _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF | _CRTDBG_CHECK_ALWAYS_DF;
-
-   /* Turn off CRT block checking bit */
-   tmpFlag &= ~(_CRTDBG_CHECK_CRT_DF | _CRTDBG_DELAY_FREE_MEM_DF);
-
-   /* Set flag to the new value */
-   _CrtSetDbgFlag( tmpFlag );
-#endif
-#endif /* defined(_WIN32) && defined(_MSC_VER) && defined(_DEBUG) */
-
-
-/************
- * I couldn't figure out why the command line was being sorta parsed here
- * instead of using the __argc & __argv globals usually defined in stdlib.h
- *
- * From what I can tell by looking at the MinWG source, it supports these
- * globals, so i'd hope that the other compilers do so as well.
- * Obviously, if i'm wrong i'll find out soon enough!  :)
- ************/
-#if 0
-   /*
-    * Cheat in parsing the command line.  We only ever have at most one
-    * paramater, which may optionally be specified inside double quotes.
-    */
-
-   if (lpCmdLine != NULL)
-   {
-      /* Make writable copy */
-      lpCmdLine = strdup(lpCmdLine);
-   }
-   if (lpCmdLine != NULL)
-   {
-      chomp(lpCmdLine);
-      i = strlen(lpCmdLine);
-      if ((i >= 2) && (lpCmdLine[0] == '\"') && (lpCmdLine[i - 1] == '\"'))
-      {
-         lpCmdLine[i - 1] = '\0';
-         lpCmdLine++;
-      }
-      if (lpCmdLine[0] == '\0')
-      {
-         lpCmdLine = NULL;
-      }
-   }
-
-   GetModuleFileName(hInstance, szModule, MAX_PATH);
-   argv[0] = szModule;
-   argv[1] = lpCmdLine;
-   argv[2] = NULL;
-   argc = ((lpCmdLine != NULL) ? 2 : 1);
-#endif /* -END- 0 */
-
-
-#ifndef _WIN_CONSOLE
-   /* Create a user-interface thread and wait for it to initialise */
-   hInitCompleteEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
-   g_hInstance = hInstance;
-   g_nCmdShow = nCmdShow;
-   _beginthread(UserInterfaceThread, 0, &hInitCompleteEvent);
-   WaitForSingleObject(hInitCompleteEvent, INFINITE);
-   DeleteObject(hInitCompleteEvent);
-#endif
-
-#ifdef __MINGW32__
-   res = real_main( __argc, __argv );
-#else
-   res = main( __argc, __argv );
-#endif
-
-   return res;
-
-}
-
-#endif
-
-/*********************************************************************
- *
- * Function    :  InitWin32
- *
- * Description :  Initialise windows, setting up the console or windows as appropriate.
- *
- * Parameters  :  None
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-void InitWin32(void)
-{
-   WORD wVersionRequested;
-   WSADATA wsaData;
-
-#ifdef _WIN_CONSOLE
-   SetProcessShutdownParameters(0x100, SHUTDOWN_NORETRY);
-   if (hideConsole)
-   {
-      FreeConsole();
-   }
-#endif
-   wVersionRequested = MAKEWORD(2, 0);
-   if (WSAStartup(wVersionRequested, &wsaData) != 0)
-   {
-#ifndef _WIN_CONSOLE
-      MessageBox(NULL, "Cannot initialize WinSock library", "Privoxy Error", 
-         MB_OK | MB_ICONERROR | MB_TASKMODAL | MB_SETFOREGROUND | MB_TOPMOST);  
-#endif
-      exit(1);
-   }
-
-}
-
-
-#ifndef _WIN_CONSOLE
-#include <signal.h>
-#include <assert.h>
-
-#include "win32.h"
-#include "w32log.h"
-
-
-/*********************************************************************
- *
- * Function    :  UserInterfaceThread
- *
- * Description :  User interface thread.  WinMain will wait for us to set
- *                the hInitCompleteEvent before patching over to `main'.
- *                This ensures the systray window is active before beginning
- *                operations.
- *
- * Parameters  :
- *          1  :  pData = pointer to `hInitCompleteEvent'.
- *
- * Returns     :  N/A
- *
- *********************************************************************/
-static void __cdecl UserInterfaceThread(void *pData)
-{
-   MSG msg;
-   HANDLE hInitCompleteEvent = *((HANDLE *) pData);
-
-   /* Initialise */
-   InitLogWindow();
-   SetEvent(hInitCompleteEvent);
-
-   /* Enter a message processing loop */
-   while (GetMessage(&msg, (HWND) NULL, 0, 0))
-   {
-      TranslateMessage(&msg);
-      DispatchMessage(&msg);
-   }
-
-   /* Cleanup */
-   TermLogWindow();
-
-   /* Time to die... */
-   exit(0);
-
-}
-
-
-#endif /* ndef _WIN_CONSOLE */
-
-
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/
diff --git a/external/privoxy/win32.h b/external/privoxy/win32.h
deleted file mode 100644
index 1b4e814..0000000
--- a/external/privoxy/win32.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef WIN32_H_INCLUDED
-#define WIN32_H_INCLUDED
-#define WIN32_H_VERSION "$Id: win32.h,v 1.7 2006/07/18 14:48:48 david__schmidt Exp $"
-/*********************************************************************
- *
- * File        :  $Source: /cvsroot/ijbswa/current/win32.h,v $
- *
- * Purpose     :  Win32 User Interface initialization and message loop
- *
- * Copyright   :  Written by and Copyright (C) 2001-2002 members of
- *                the Privoxy team.  http://www.privoxy.org/
- *
- *                Written by and Copyright (C) 1999 Adam Lock
- *                <locka@xxxxxx>
- *
- *                This program is free software; you can redistribute it 
- *                and/or modify it under the terms of the GNU General
- *                Public License as published by the Free Software
- *                Foundation; either version 2 of the License, or (at
- *                your option) any later version.
- *
- *                This program is distributed in the hope that it will
- *                be useful, but WITHOUT ANY WARRANTY; without even the
- *                implied warranty of MERCHANTABILITY or FITNESS FOR A
- *                PARTICULAR PURPOSE.  See the GNU General Public
- *                License for more details.
- *
- *                The GNU General Public License should be included with
- *                this file.  If not, you can view it at
- *                http://www.gnu.org/copyleft/gpl.html
- *                or write to the Free Software Foundation, Inc., 59
- *                Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * Revisions   :
- *    $Log: win32.h,v $
- *    Revision 1.7  2006/07/18 14:48:48  david__schmidt
- *    Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- *    with what was really the latest development (the v_3_0_branch branch)
- *
- *    Revision 1.5  2002/03/26 22:57:10  jongfoster
- *    Web server name should begin www.
- *
- *    Revision 1.4  2002/03/24 12:03:47  jongfoster
- *    Name change
- *
- *    Revision 1.3  2001/07/30 22:08:36  jongfoster
- *    Tidying up #defines:
- *    - All feature #defines are now of the form FEATURE_xxx
- *    - Permanently turned off WIN_GUI_EDIT
- *    - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- *    Revision 1.2  2001/07/29 18:43:08  jongfoster
- *    Changing #ifdef _FILENAME_H to FILENAME_H_INCLUDED, to conform to
- *    ANSI C rules.
- *
- *    Revision 1.1.1.1  2001/05/15 13:59:08  oes
- *    Initial import of version 2.9.3 source tree
- *
- *
- *********************************************************************/
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern const char win32_blurb[];
-
-extern void InitWin32(void);
-
-#ifdef _WIN_CONSOLE
-extern int hideConsole;
-#endif /*def _WIN_CONSOLE */
-
-extern HINSTANCE g_hInstance;
-extern int g_nCmdShow;
-
-extern int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow);
-
-/* Revision control strings from this header and associated .c file */
-extern const char win32_rcs[];
-extern const char win32_h_rcs[];
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* ndef WIN32_H_INCLUDED */
-  
-/*
-  Local Variables:
-  tab-width: 3
-  end:
-*/



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits