Re: [tor-relays] High speed Tor relay advice

[Green Dream <greendream848@xxxxxxxxx>]

Hi i3,

Thanks for running relays! Agreed you will want to run multiple instances to make the most of your host.

The Xeon E5-2620v3 does have AES-NI, which is good.

Other items to consider:

- On most linux/unix systems the ulimits will be set too low by default. On debian-like linux, higher limits for Tor might look like the following in /etc/security/limits.conf:

debian-tor             soft    nofile          64000
debian-tor             hard    nofile          64000

- There are a lot of possible syctl tweaks. You could check out https://raw.githubusercontent.com/torservers/server-config-templates/master/sysctl.conf. I use these values on my non-exit relays:

net.core.wmem_max = 12582912
net.core.rmem_max = 12582912
net.ipv4.tcp_rmem = 10240 87380 12582912
net.ipv4.tcp_wmem = 10240 87380 12582912
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.send_redirects = 0
kernel.sysrq = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 4
net.ipv4.tcp_keepalive_time = 60
net.ipv4.tcp_keepalive_intvl = 10
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.ip_local_port_range = 1025 65530
net.core.somaxconn = 20480
net.ipv4.tcp_timestamps = 0
fs.file-max = 64000

- You should install ntp make sure your clock is synced.

- You should install a local DNS resolver (unbound, named, dnsmasq, something along those lines).
 
This guide has a lot of helpful info: https://www.torservers.net/wiki/setup/server

_______________________________________________
tor-relays mailing list
tor-relays@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays