[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
gEDA-cvs: pcb.git: branch: master updated (481fe9e27df67e93921d20cac95a38c49ea6a664)
The branch, master has been updated
via 481fe9e27df67e93921d20cac95a38c49ea6a664 (commit)
via 73ee8734a76611b4356d52db0cd067e1013743a3 (commit)
from 17ba60b0515558fdcaaa1af4371cc3dfda657de9 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
=========
Summary
=========
po/POTFILES.in | 4 ++--
src/Makefile.am | 22 ++++++++++++++++------
src/{gpcb-menu.res => gpcb-menu.res.in} | 0
src/{pcb-menu.res => pcb-menu.res.in} | 2 +-
4 files changed, 19 insertions(+), 9 deletions(-)
rename src/{gpcb-menu.res => gpcb-menu.res.in} (100%)
rename src/{pcb-menu.res => pcb-menu.res.in} (99%)
=================
Commit Messages
=================
commit 481fe9e27df67e93921d20cac95a38c49ea6a664
Author: Peter Clifton <pcjc2@xxxxxxxxx>
Commit: Peter Clifton <pcjc2@xxxxxxxxx>
Generate pcb-menu.res and gpcb-menu.res from ".in" files
No functional changes here, just a preliminary cleaning before
adding the topological autorouter to the menus. Doing so requies
conditional inclusion of certain lines, as the toporouter is not
always built.
Based on a patch by Stanislav Brabec <sbrabec@xxxxxxx>
Affects-bug: lp-812429
:100644 100644 0e5e331... 8d62595... M po/POTFILES.in
:100644 100644 7efb2d7... 75c6886... M src/Makefile.am
:100644 000000 dc594c4... 0000000... D src/gpcb-menu.res
:000000 100644 0000000... dc594c4... A src/gpcb-menu.res.in
:100644 000000 1e88e52... 0000000... D src/pcb-menu.res
:000000 100644 0000000... 1e88e52... A src/pcb-menu.res.in
commit 73ee8734a76611b4356d52db0cd067e1013743a3
Author: Peter Clifton <pcjc2@xxxxxxxxx>
Commit: Peter Clifton <pcjc2@xxxxxxxxx>
pcb-menu.res: Fixup some more whitespace
:100644 100644 bda9bd7... 1e88e52... M src/pcb-menu.res
=========
Changes
=========
commit 481fe9e27df67e93921d20cac95a38c49ea6a664
Author: Peter Clifton <pcjc2@xxxxxxxxx>
Commit: Peter Clifton <pcjc2@xxxxxxxxx>
Generate pcb-menu.res and gpcb-menu.res from ".in" files
No functional changes here, just a preliminary cleaning before
adding the topological autorouter to the menus. Doing so requies
conditional inclusion of certain lines, as the toporouter is not
always built.
Based on a patch by Stanislav Brabec <sbrabec@xxxxxxx>
Affects-bug: lp-812429
diff --git a/po/POTFILES.in b/po/POTFILES.in
index 0e5e331..8d62595 100644
--- a/po/POTFILES.in
+++ b/po/POTFILES.in
@@ -16,7 +16,7 @@ src/edif.c
src/error.c
src/file.c
src/find.c
-src/gpcb-menu.res
+src/gpcb-menu.res.in
src/hid/batch/batch.c
src/hid/common/actions.c
src/hid/common/hidnogui.c
@@ -40,7 +40,7 @@ src/misc.c
src/move.c
src/netlist.c
src/parse_y.c
-src/pcb-menu.res
+src/pcb-menu.res.in
src/polygon.c
src/rats.c
src/report.c
diff --git a/src/Makefile.am b/src/Makefile.am
index 7efb2d7..75c6886 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -18,7 +18,7 @@ EXTRA_LIBRARIES = \
liblpr.a libgerber.a libbom.a libpng.a libps.a libnelma.a \
libgcode.a
-pcblib_DATA= \
+pcblib_DATA= \
default_font \
gpcb-menu.res \
pcb-menu.res
@@ -230,8 +230,8 @@ EXTRA_DIST= \
$(srcdir)/hid/png/hid.conf \
$(srcdir)/hid/nelma/hid.conf \
$(srcdir)/hid/ps/hid.conf \
- gpcb-menu.res \
- pcb-menu.res \
+ gpcb-menu.res.in \
+ pcb-menu.res.in \
pcbtest.sh.in \
dbus.xml
@@ -239,16 +239,24 @@ AM_YFLAGS= -d
all-local: pcbtest.sh
+pcb-menu.res : pcb-menu.res.in
+ echo '/* AUTOMATICALLY GENERATED FROM pcb-menu.res.in DO NOT EDIT */' > $@
+ cat ${srcdir}/pcb-menu.res.in >> $@
+
pcb-menu.h : pcb-menu.res
echo '/* AUTOMATICALLY GENERATED FROM pcb-menu.res DO NOT EDIT */' > $@
echo 'const char *pcb_menu_default[] = {' >> $@
- sed 's/\\/\\\\/g; s/"/\\"/g; s/^/"/; s/$$/",/' < ${srcdir}/pcb-menu.res >> $@
+ sed 's/\\/\\\\/g; s/"/\\"/g; s/^/"/; s/$$/",/' < pcb-menu.res >> $@
echo '0};' >> $@
+gpcb-menu.res : gpcb-menu.res.in
+ echo '/* AUTOMATICALLY GENERATED FROM gpcb-menu.res.in DO NOT EDIT */' > $@
+ cat ${srcdir}/gpcb-menu.res.in >> $@
+
gpcb-menu.h : gpcb-menu.res
echo '/* AUTOMATICALLY GENERATED FROM gpcb-menu.res DO NOT EDIT */' > $@
echo 'const char *gpcb_menu_default[] = {' >> $@
- sed 's/\\/\\\\/g; s/"/\\"/g; s/^/"/; s/$$/",/' < ${srcdir}/gpcb-menu.res >> $@
+ sed 's/\\/\\\\/g; s/"/\\"/g; s/^/"/; s/$$/",/' < gpcb-menu.res >> $@
echo '0};' >> $@
hid/common/hidlist.h : Makefile
@@ -449,7 +457,9 @@ DISTCLEANFILES= pcbtest.sh gpcb-menu.h pcb-menu.h \
hid/nelma/nelma_lists.h \
hid/ps/ps_lists.h \
core_lists.h \
- dbus-introspect.h
+ dbus-introspect.h \
+ gpcb-menu.res \
+ pcb-menu.res
# create wrapper script that lets you test pcb prior to installation
pcbtest.sh: $(srcdir)/pcbtest.sh.in Makefile
diff --git a/src/gpcb-menu.res b/src/gpcb-menu.res
deleted file mode 100644
index dc594c4..0000000
--- a/src/gpcb-menu.res
+++ /dev/null
@@ -1,532 +0,0 @@
-# -*- c -*-
-# Note - gpcb-menu.res is used to build gpcb-menu.h
-# Note - parameters are sensitive to extra spaces around the commas
-
-Mouse =
-{
- Left = {
- Mode(Notify)
- ctrl = { Mode(Save) Mode(None) Mode(Restore) Mode(Notify) }
- shift-ctrl = { Mode(Save) Mode(Remove) Mode(Notify) Mode(Restore) }
- up = Mode(Release)
- }
- Right = {
- Pan(1)
- up = Pan(0)
- shift = Popup(Popup1)
- ctrl = Display(CycleCrosshair)
- }
- Middle = {
- Mode(Stroke)
- up = Mode(Release)
- ctrl = { Mode(Save) Mode(Copy) Mode(Notify) }
- up-ctrl = { Mode(Notify) Mode(Restore) }
- shift-ctrl = { Display(ToggleRubberbandMode) Mode(Save) Mode(Move) Mode(Notify) }
- up-shift-ctrl = { Mode(Notify) Mode(Restore) Display(ToggleRubberbandMode) }
- }
- Up = {
- Zoom(0.8)
- shift = Scroll(up)
- ctrl = Scroll(left)
- }
- Down = {
- Zoom(1.25)
- shift = Scroll(down)
- ctrl = Scroll(right)
- }
-# If you want zoom to center, do this instead.
- #Up = { {Zoom(0.8) Center()} }
- #Down = { {Zoom(1.25) Center()} }
-}
-
-MainMenu =
-{
-
-#
-# File Menu
-#
- {"File"
- {"Save Layout" Save(Layout) tip="Saves current layout" m=S a={"Ctrl-S" "Ctrl<Key>s"}}
- {"Save Layout As..." Save(LayoutAs) tip="Saves current layout into a new file" m=A a={"Shift Ctrl-S" "Shift Ctrl<Key>s"}}
- -
- {"Revert" Load(Revert,none) tip="Revert to the layout stored on disk"}
- -
- {"Import Schematics" Import() }
- {"Load layout" Load(Layout) tip="Load a layout from a file"}
- {"Load element data to paste-buffer" PasteBuffer(Clear) Load(ElementTobuffer)}
- {"Load layout data to paste-buffer" PasteBuffer(Clear) Load(LayoutTobuffer)}
- {"Load netlist file" Load(Netlist)}
- {"Load vendor resource file" LoadVendorFrom()}
- -
- {"Save connection data of"
- {" a single element" GetXY(Click to set the element mark <>) Save(ElementConnections)}
- {" all elements" Save(AllConnections)}
- {" unused pins" Save(AllUnusedPins)}
- }
- -
- {"Print layout..." Print()}
- {"Export layout..." Export()}
- {"Calibrate Printer..." PrintCalibrate()}
- -
- {"Start New Layout" New() a={"Ctrl-N" "Ctrl<Key>n"}}
- -
- {"Preferences..." DoWindows(Preferences)}
- -
- {"Quit Program" Quit() a={"Ctrl-Q" "Ctrl<Key>q"}}
- }
-
-#
-# Edit Menu
-#
- {"Edit"
- {"Undo last operation" Undo() a={"U" "<Key>u"}}
- {"Redo last undone operation" Redo() a={"Shift-R" "Shift<Key>r"}}
- {"Clear undo-buffer" Undo(ClearList) a={"Shift-Ctrl-U" "Shift Ctrl<Key>u"}}
- -
- {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)
- a={"Ctrl-X" "Ctrl<Key>x"}}
- {"Copy selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) Unselect(All) Mode(PasteBuffer)
- a={"Ctrl-C" "Ctrl<Key>c"}}
- {"Paste buffer to layout" Mode(PasteBuffer) a={"Ctrl-V" "Ctrl<Key>v"}}
- -
- {"Unselect all" Unselect(All) a={"Shift-Alt-A" "Shift Alt<Key>a"}}
- {"Select all visible" Select(All) a={"Alt-A" "Alt<Key>a"}}
- -
- {"Edit name of"
- {"text on layout" ChangeName(Object) a={"N" "<Key>n"}}
- {"layout" ChangeName(Layout)}
- {"active layer" ChangeName(Layer)}
- }
- {"Edit attributes of"
- {"Layout" Attributes(Layout)}
- {"CurrentLayer" Attributes(Layer)}
- {"Element" Attributes(Element)}
- }
- -
- {"Route Styles" @routestyles
- -
- {"Edit..." AdjustStyle(0)}
- }
- }
-
-#
-# View Menu
-#
- {"View"
- {"Enable visible grid" checked=drawgrid Display(Grid)}
- {"Grid units"
- {"mil" checked=grid_units_mm,0 SetUnits(mil)}
- {"mm" checked=grid_units_mm,1 SetUnits(mm)}
- }
- {"Grid size"
- {"No Grid" checked=gridsize,1 SetValue(Grid,1)}
- -
- { "0.1 mil" checked=gridsize,10 SetUnits(mil) SetValue(Grid,10)}
- { "1 mil" checked=gridsize,100 SetUnits(mil) SetValue(Grid,100)}
- { "5 mil" checked=gridsize,500 SetUnits(mil) SetValue(Grid,500)}
- { "10 mil" checked=gridsize,1000 SetUnits(mil) SetValue(Grid,1000)}
- { "25 mil" checked=gridsize,2500 SetUnits(mil) SetValue(Grid,2500)}
- { "50 mil" checked=gridsize,5000 SetUnits(mil) SetValue(Grid,5000)}
- {"100 mil" checked=gridsize,10000 SetUnits(mil) SetValue(Grid,10000)}
- -
- {"0.01 mm" checked=gridsize,39 SetUnits(mm) SetValue(Grid,0.01mm)}
- {"0.05 mm" checked=gridsize,197 SetUnits(mm) SetValue(Grid,0.05mm)}
- {"0.1 mm" checked=gridsize,394 SetUnits(mm) SetValue(Grid,0.1mm)}
- {"0.25 mm" checked=gridsize,984 SetUnits(mm) SetValue(Grid,0.25mm)}
- {"0.5 mm" checked=gridsize,1969 SetUnits(mm) SetValue(Grid,0.5mm)}
- {"1 mm" checked=gridsize,3937 SetUnits(mm) SetValue(Grid,1mm)}
- -
- {"Grid -5mil" SetValue(Grid,-5,mil) a={"Shift-G" "Shift<Key>g"}}
- {"Grid +5mil" SetValue(Grid,+5,mil) a={"G" "<Key>g"}}
- {"Grid -0.05mm" SetValue(Grid,-0.05,mm) a={"Shift-Ctrl-G" "Shift Ctrl<Key>g"}}
- {"Grid +0.05mm" SetValue(Grid,+0.05,mm) a={"Ctrl-G" "Ctrl<Key>g"}}
- }
- {"Realign grid" GetXY(Click to set the grid origin) Display(ToggleGrid)}
- -
- {"Displayed element name"
- {"Description" Display(Description) checked=elementname,1}
- {"Reference Designator" Display(NameOnPCB) checked=elementname,2}
- {"Value" Display(Value) checked=elementname,3}
- }
- {"Enable Pinout shows number" checked=shownumber Display(ToggleName)}
- {"Pins/Via show Name/Number" Display(PinOrPadName) a={"D" "<Key>d"}}
- -
- {"Zoom In 20%" Zoom(-1.2) m=Z a={"Z" "<Key>z"}}
- {"Zoom Out 20%" Zoom(+1.2) m=O a={"Shift-Z" "Shift<Key>z"}}
- {"More zooms and view changes"
- {"Zoom Max" Zoom() m=M a={"V" "<Key>v"}}
- {"Zoom In 2X" Zoom(-2)}
- {"Zoom Out 2X" Zoom(+2)}
- {"Zoom to 0.1mil/px" Zoom(=10)}
- {"Zoom to 0.01mm/px" Zoom(=39.37)}
- {"Zoom to 1mil/px" Zoom(=100)}
- {"Zoom to 0.05mm/px" Zoom(=196.8504)}
- {"Zoom to 2.5mil/px" Zoom(=250)}
- {"Zoom to 0.1mm/px" Zoom(=393.7)}
- {"Zoom to 10mil/px" Zoom(=1000)}
- {"Zoom In 20% and center" Zoom(-1.2) Center() m=Z }
- {"Zoom Out 20% and center" Zoom(+1.2) Center() m=O }
- {"Flip up/down" checked=flip_y SwapSides(V) a={"Tab" "<Key>Tab"}}
- {"Flip left/right" checked=flip_x SwapSides(H) a={"Shift-Tab" "Shift<Key>Tab"}}
- {"Spin 180 degrees" SwapSides(R) a={"Ctrl-Tab" "Ctrl<Key>Tab"}}
- {"Swap Sides" SwapSides() a={"Ctrl-Shift-Tab" "Ctrl Shift<Key>Tab"}}
- {"Center cursor" Center() a={"C" "<Key>c"}}
- }
- -
- {"Shown Layers"
- @layerview
- -
- {"Edit Layer Groups" EditLayerGroups()}
- }
- {"Current Layer"
- @layerpick
- -
- {"Delete current layer" MoveLayer(c,-1)}
- {"Add new layer" MoveLayer(-1,c)}
- {"Move current layer up" MoveLayer(c,up)}
- {"Move current layer down" MoveLayer(c,down)}
- }
- }
-
-#
-# Settings menu
-#
- {"Settings"
- {"'All-direction' lines" checked=alldirection Display(Toggle45Degree) a={"." "<Key>."}}
- {"Auto swap line start angle" checked=swapstartdir Display(ToggleStartDirection)}
- {"Orthogonal moves" checked=orthomove Display(ToggleOrthoMove)}
- {"Crosshair snaps to pins and pads" checked=snappin Display(ToggleSnapPin)}
- {"Crosshair shows DRC clearance" checked=showdrc Display(ToggleShowDRC)}
- {"Auto enforce DRC clearance" checked=autodrc Display(ToggleAutoDRC)}
- {"Lock Names" checked=locknames Display(ToggleLockNames)}
- {"Only Names" checked=onlynames Display(ToggleOnlyNames)}
- {"Hide Names" checked=hidenames Display(ToggleHideNames)}
- -
- {"Rubber band mode" checked=rubberband Display(ToggleRubberBandMode)}
- {"Require unique element names" checked=uniquename Display(ToggleUniqueNames)}
- {"Auto-zero delta measurements" checked=localref Display(ToggleLocalRef)}
- {"New lines, arcs clear polygons" checked=clearnew Display(ToggleClearLine)}
- {"New polygons are full ones" checked=newfullpoly Display(ToggleFullPoly)}
- {"Show autorouter trials" checked=liveroute Display(ToggleLiveRoute)}
- {"Thin draw" checked=thindraw Display(ToggleThindraw) a={"|" "<Key>|"}}
- {"Thin draw poly" checked=thindrawpoly Display(ToggleThindrawPoly) a={"Ctrl-Shift-P" "Ctrl Shift<Key>p"}}
- {"Check polygons" checked=checkplanes Display(ToggleCheckPlanes)}
- -
- {"Vendor drill mapping" ToggleVendor() checked=VendorMapOn}
- {"Import New Elements at" m=I
- {" Center" Import(setnewpoint,center) m=C}
- {" Mark" Import(setnewpoint,mark) m=M}
- {" Crosshair" Import(setnewpoint) m=h}
- -
- {"Set Dispersion" Import(setdisperse) m=D}
- }
- }
-
-#
-# Select menu
-#
- {"Select"
- {"Select all visible objects" Select(All)}
- {"Select all connected objects" Select(Connection)}
- -
- {"Unselect all objects" Unselect(All)}
- {"unselect all connected objects" Unselect(Connection)}
- -
- {"Select by name"
- {"All objects" Select(ObjectByName) active=have_regex}
- {"Elements" Select(ElementByName) active=have_regex}
- {"Pads" Select(PadByName) active=have_regex}
- {"Pins" Select(PinByName) active=have_regex}
- {"Text" Select(TextByName) active=have_regex}
- {"Vias" Select(ViaByName) active=have_regex}
- }
- -
- {"Auto-place selected elements" AutoPlaceSelected() a={"Ctrl-P" "Ctrl<Key>p"}}
- {"Disperse all elements" DisperseElements(All)}
- {"Disperse selected elements" DisperseElements(Selected)}
- -
- {"Move selected elements to other side" Flip(SelectedElements) a={"Shift-B" "Shift<Key>b"}}
- {"Move selected to current layer" MoveToCurrentLayer(Selected) a={"Shift-M" "Shift<Key>m"}}
- {"Remove selected objects" RemoveSelected() a={"Shift-Delete" "Shift<Key>Delete"}}
- {"Convert selection to element" Select(Convert)}
- -
- {"Optimize selected rats" DeleteRats(SelectedRats) AddRats(SelectedRats)}
- {"Auto-route selected rats" AutoRoute(SelectedRats) a={"Alt-R" "Alt<Key>r"}}
- {"Rip up selected auto-routed tracks" RipUp(Selected)}
- -
- {"Change size of selected objects"
- {"Lines -10 mil" ChangeSize(SelectedLines,-10,mil) ChangeSize(SelectedArcs,-10,mil)}
- {"Lines +10 mil" ChangeSize(SelectedLines,+10,mil) ChangeSize(SelectedArcs,+10,mil)}
- {"Pads -10 mil" ChangeSize(SelectedPads,-10,mil)}
- {"Pads +10 mil" ChangeSize(SelectedPads,+10,mil)}
- {"Pins -10 mil" ChangeSize(SelectedPins,-10,mil)}
- {"Pins +10 mil" ChangeSize(SelectedPins,+10,mil)}
- {"Texts -10 mil" ChangeSize(SelectedTexts,-10,mil)}
- {"Texts +10 mil" ChangeSize(SelectedTexts,+10,mil)}
- {"Vias -10 mil" ChangeSize(SelectedVias,-10,mil)}
- {"Vias +10 mil" ChangeSize(SelectedVias,+10,mil)}
- }
- -
- {"Change drilling hole of selected objects"
- {"Vias -10 mil" ChangeDrillSize(SelectedVias,-10,mil)}
- {"Vias +10 mil" ChangeDrillSize(SelectedVias,+10,mil)}
- {"Pins -10 mil" ChangeDrillSize(SelectedPins,-10,mil)}
- {"Pins +10 mil" ChangeDrillSize(SelectedPins,+10,mil)}
- }
- -
- {"Change square-flag of selected objects"
- {"Elements" ChangeSquare(SelectedElements)}
- {"Pins" ChangeSquare(SelectedPins)}
- }
- }
-
-#
-# Buffer menu
-#
- {"Buffer"
- {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)}
- {"Paste buffer to layout" Mode(PasteBuffer)}
- -
- {"Rotate buffer 90 deg CCW" Mode(PasteBuffer) PasteBuffer(Rotate,1)
- a={"Shift-F7" "Shift<Key>F7"}}
- {"Rotate buffer 90 deg CW" Mode(PasteBuffer) PasteBuffer(Rotate,3)}
- {"Arbitrarily Rotate Buffer" Mode(PasteBuffer) FreeRotateBuffer()}
- {"Mirror buffer (up/down)" Mode(PasteBuffer) PasteBuffer(Mirror)}
- {"Mirror buffer (left/right)" Mode(PasteBuffer) PasteBuffer(Rotate,1)
- PasteBuffer(Mirror) PasteBuffer(Rotate,3)}
- -
- {"Clear buffer" PasteBuffer(Clear)}
- {"Convert buffer to element" PasteBuffer(Convert)}
- {"Break buffer elements to pieces" PasteBuffer(Restore)}
- {"Save buffer elements to file" Save(PasteBuffer)}
- -
- {"Select Buffer #1" checked=buffer,1 PasteBuffer(1) m=1 a={"Shift-1" "Shift<Key>1"}}
- {"Select Buffer #2" checked=buffer,2 PasteBuffer(2) m=2 a={"Shift-2" "Shift<Key>2"}}
- {"Select Buffer #3" checked=buffer,3 PasteBuffer(3) m=3 a={"Shift-3" "Shift<Key>3"}}
- {"Select Buffer #4" checked=buffer,4 PasteBuffer(4) m=4 a={"Shift-4" "Shift<Key>4"}}
- {"Select Buffer #5" checked=buffer,5 PasteBuffer(5) m=5 a={"Shift-5" "Shift<Key>5"}}
- }
-
-#
-# Connects menu
-#
- {"Connects"
- {"Lookup connection to object" GetXY(Click on the object) Connection(Find) a={"Ctrl-F" "Ctrl<Key>f"}}
- {"Reset scanned pads/pins/vias" Connection(ResetPinsViasAndPads) Display(Redraw)}
- {"Reset scanned lines/polygons" Connection(ResetLinesAndPolygons) Display(Redraw)}
- {"Reset all connections" Connection(Reset) Display(Redraw) a={"Shift-F" "Shift<Key>f"}}
- -
- {"Optimize rats nest" Atomic(Save) DeleteRats(AllRats)
- Atomic(Restore) AddRats(AllRats) Atomic(Block) a={"O" "<Key>o"}}
- {"Erase rats nest" DeleteRats(AllRats) a={"E" "<Key>e"}}
- {"Erase selected rats" DeleteRats(SelectedRats) a={"Shift-E" "Shift<Key>e"}}
- -
- {"Auto-route selected rats" AutoRoute(Selected)}
- {"Auto-route all rats" AutoRoute(AllRats)}
- {"Rip up all auto-routed tracks" RipUp(All)}
- -
- {"Optimize routed tracks"
- {"Auto-Optimize" djopt(auto) a={"Shift-=" "Shift<Key>="}}
- {"Debumpify" djopt(debumpify) }
- {"Unjaggy" djopt(unjaggy) }
- {"Vianudge" djopt(vianudge) }
- {"Viatrim" djopt(viatrim) }
- {"Ortho pull" djopt(orthopull) }
- {"Simple optimization" djopt(simple) a={"=" "<Key>="}}
- {"Miter" djopt(miter) }
- {"Puller" a={"Y" "<Key>y"} Puller() }
- {"Global Puller"
- {"Selected" GlobalPuller(selected) }
- {"Found" GlobalPuller(found) }
- {"All" GlobalPuller() }
- }
- -
- {"Only autorouted nets" OptAutoOnly() checked=optautoonly}
- }
- -
- {"Design Rule Checker" DRC()}
- -
- {"Apply vendor drill mapping" ApplyVendor()}
- }
-
-#
-# Info Menu
-#
- {"Info"
- {"Generate object report" ReportObject() a={"Ctrl-R" "Ctrl<Key>r"}}
- {"Generate drill summary" Report(DrillReport)}
- {"Report found pins/pads" Report(FoundPins)}
- {"Key Bindings"
- {"Remove" a={"Delete" "<Key>Delete"}
- Mode(Save)
- Mode(Remove)
- Mode(Notify)
- Mode(Restore)
- }
- {"Remove Selected" a={"Backspace" "<Key>BackSpace"}
- RemoveSelected()
- }
- {"Remove Connected" a={"Shift-Backspace" "Shift<Key>BackSpace"}
- Atomic(Save)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Restore)
- Connection(Find)
- Atomic(Restore)
- Select(Connection)
- Atomic(Restore)
- RemoveSelected()
- Atomic(Restore)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Block)
- }
- {"Remove Connected"
- Atomic(Save)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Restore)
- Connection(Find)
- Atomic(Restore)
- Select(Connection)
- Atomic(Restore)
- RemoveSelected()
- Atomic(Restore)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Block)
- }
- {"Set Same" a={"A" "<Key>a"} SetSame()}
- {"Flip Object" a={"B" "<Key>b"} Flip(Object)}
- {"Find Connections" a={"F" "<Key>f"} Connection(Reset) Connection(Find)}
- {"ToggleHideName Object" a={"H" "<Key>h"} ToggleHideName(Object)}
- {"ToggleHideName SelectedElement" a={"Shift-H" "Shift<Key>h"} ToggleHideName(SelectedElements)}
- {"ChangeHole Object" a={"Ctrl-H" "Ctrl<Key>h"} ChangeHole(Object)}
- {"ChangeJoin Object" a={"J" "<Key>j"} ChangeJoin(Object)}
- {"ChangeJoin SelectedObject" a={"Shift-J" "Shift<Key>j"} ChangeJoin(SelectedObjects)}
- {"Clear Object +2 mil" a={"K" "<Key>k"} ChangeClearSize(Object,+2,mil)}
- {"Clear Object -2 mil" a={"Shift-K" "Shift<Key>k"} ChangeClearSize(Object,-2,mil)}
- {"Clear Selected +2 mil" a={"Ctrl-K" "Ctrl<Key>k"} ChangeClearSize(SelectedObjects,+2,mil)}
- {"Clear Selected -2 mil" a={"Shift-Ctrl-K" "Shift Ctrl<Key>k"} ChangeClearSize(SelectedObjects,-2,mil)}
- {"Line Tool size +5 mil" a={"L" "<Key>l"} SetValue(LineSize,+5,mil)}
- {"Line Tool size -5 mil" a={"Shift-L" "Shift<Key>l"} SetValue(LineSize,-5,mil)}
- {"Move Object to current layer" a={"M" "<Key>m"} MoveToCurrentLayer(Object)}
- {"MarkCrosshair" a={"Ctrl-M" "Ctrl<Key>m"} MarkCrosshair()}
- {"Select shortest rat" a={"Shift-N" "Shift<Key>n"} AddRats(Close)}
- {"AddRats to selected pins" a={"Shift-O" "Shift<Key>o"}
- Atomic(Save)
- DeleteRats(AllRats)
- Atomic(Restore)
- AddRats(SelectedRats)
- Atomic(Block) }
- {"ChangeOctagon Object" a={"Ctrl-O" "Ctrl<Key>o"} ChangeOctagon(Object)}
- {"Polygon PreviousPoint" a={"P" "<Key>p"} Polygon(PreviousPoint)}
- {"Polygon Close" a={"Shift-P" "Shift<Key>p"} Polygon(Close)}
- {"ChangeSquare Object" a={"Q" "<Key>q"} ChangeSquare(ToggleObject)}
- {"ChangeSize +5 mil" a={"S" "<Key>s"} ChangeSize(Object,+5,mil)}
- {"ChangeSize -5 mil" a={"Shift-S" "Shift<Key>s"} ChangeSize(Object,-5,mil)}
- {"ChangeDrill +5 mil" a={"Alt-S" "Alt<Key>s"} ChangeDrillSize(Object,+5,mil)}
- {"ChangeDrill -5 mil" a={"Alt-Shift-S" "Alt Shift<Key>s"} ChangeDrillSize(Object,-5,mil)}
- {"Text Tool scale +10 mil" a={"T" "<Key>t"} SetValue(TextScale,+10,mil)}
- {"Text Tool scale -10 mil" a={"Shift-T" "Shift<Key>t"} SetValue(TextScale,-10,mil)}
- {"Via Tool size +5 mil" a={"Shift-V" "Shift<Key>v"} SetValue(ViaSize,+5,mil)}
- {"Via Tool size -5 mil" a={"Shift-Ctrl-V" "Shift Ctrl<Key>v"} SetValue(ViaSize,-5,mil)}
- {"Via Tool drill +5 mil" a={"Alt-V" "Alt<Key>v"} SetValue(ViaDrillingHole,+5,mil)}
- {"Via Tool drill -5 mil" a={"Alt-Shift-V" "Alt Shift<Key>v"} SetValue(ViaDrillingHole,-5,mil)}
- {"AddRats Selected" a={"Shift-W" "Shift<Key>w"} AddRats(SelectedRats)}
- {"Add All Rats" a={"W" "<Key>w"} AddRats(AllRats)}
- {"Cycle Clip" a={"/" "<Key>/"} Display(CycleClip)}
- {"Arrow Mode" a={"Space" "<Key>space"} Mode(Arrow) checked=arrowmode,1}
- {"Temp Arrow ON" a={"[" "<Key>["} Mode(Save) Mode(Arrow) Mode(Notify)}
- {"Temp Arrow OFF" a={"]" "<Key>]"} Mode(Release) Mode(Restore)}
- -
- {"Step Up" a={"Up" "<Key>Up"} Cursor(Warp,0,1,grid)}
- {"Step Down" a={"Down" "<Key>Down"} Cursor(Warp,0,-1,grid)}
- {"Step Left" a={"Left" "<Key>Left"} Cursor(Warp,-1,0,grid)}
- {"Step Right" a={"Right" "<Key>Right"} Cursor(Warp,1,0,grid)}
- {"Step +Up" a={"Up" "Shift<Key>Up"} Cursor(Pan,0,50,view)}
- {"Step +Down" a={"Down" "Shift<Key>Down"} Cursor(Pan,0,-50,view)}
- {"Step +Left" a={"Left" "Shift<Key>Left"} Cursor(Pan,-50,0,view)}
- {"Step +Right" a={"Right" "Shift<Key>Right"} Cursor(Pan,50,0,view)}
- {'"Click"' a={"Enter" "<Key>Enter"} Mode(Notify) Mode(Release)}
- -
- }
- }
-
-#
-# Window Menu
-#
- {"Window"
- {"Library" DoWindows(Library) a={"i" "<Key>i"}}
- {"Message Log" DoWindows(Log)}
- {"DRC Check" DoWindows(DRC)}
- {"Netlist" DoWindows(Netlist)}
- {"Command Entry" Command() a={":" "<Key>:"}}
- {"Pinout" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
- -
- {"About..." About()}
- }
-}
-
-PopupMenus =
- {
- Popup1 =
- {
- {"Operations on selections"
- {"Unselect all objects" Unselect(All)}
- {"Remove selected objects" RemoveSelected()}
- {"Copy selection to buffer"
- GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear)
- PasteBuffer(AddSelected)
- Mode(PasteBuffer)
- }
- {"Cut selection to buffer"
- GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear)
- PasteBuffer(AddSelected)
- RemoveSelected()
- Mode(PasteBuffer)
- }
- {"Convert selection to element" Select(Convert)}
- {"Auto place selected elements" AutoPlaceSelected()}
- {"Autoroute selected elements" AutoRoute(SelectedRats)}
- {"Rip up selected auto-routed tracks" RipUp(Selected)}
- }
- {"Operations on this location"
- {"Generate object report" GetXY(Click on the object) Report(Object)}
- }
- -
- {"Undo last operation" Undo()}
- {"Redo last undone operation" Redo()}
- -
- {Tools
- {"None" checked=nomode,1 Mode(None)}
- {"Via" checked=viamode,1 Mode(Via) a={"F1" "<Key>F1"}}
- {"Line" checked=linemode,1 Mode(Line) a={"F2" "<Key>F2"}}
- {"Arc" checked=arcmode,1 Mode(Arc) a={"F3" "<Key>F3"}}
- {"Text" checked=textmode,1 Mode(Text) a={"F4" "<Key>F4"}}
- {"Rectangle" checked=rectanglemode,1 Mode(Rectangle) a={"F5" "<Key>F5"}}
- {"Polygon" checked=polygonmode,1 Mode(Polygon) a={"F6" "<Key>F6"}}
- {"Polygon Hole" checked=polygonholemode,1 Mode(PolygonHole)}
- {"Buffer" checked=pastebuffermode,1 Mode(PasteBuffer) a={"F7" "<Key>F7"}}
- {"Remove" checked=removemode,1 Mode(Remove) a={"F8" "<Key>F8"}}
- {"Rotate" checked=rotatemode,1 Mode(Rotate) a={"F9" "<Key>F9"}}
- {"Thermal" checked=thermalmode,1 Mode(Thermal) a={"F10" "<Key>F10"}}
- {"Arrow" checked=arrowmode,1 Mode(Arrow) a={"F11" "<Key>F11"}}
- {"Insert Point" checked=insertpointmode,1 Mode(InsertPoint) a={"Insert" "<Key>Insert"}}
- {"Move" checked=movemode,1 Mode(Move)}
- {"Copy" checked=copymode,1 Mode(Copy)}
- {"Lock" checked=lockmode,1 Mode(Lock) a={"F12" "<Key>F12"}}
- {"Cancel" Mode(Escape) a={"Esc" "<Key>Escape"}}
- }
- }
- }
-
diff --git a/src/gpcb-menu.res.in b/src/gpcb-menu.res.in
new file mode 100644
index 0000000..dc594c4
--- /dev/null
+++ b/src/gpcb-menu.res.in
@@ -0,0 +1,532 @@
+# -*- c -*-
+# Note - gpcb-menu.res is used to build gpcb-menu.h
+# Note - parameters are sensitive to extra spaces around the commas
+
+Mouse =
+{
+ Left = {
+ Mode(Notify)
+ ctrl = { Mode(Save) Mode(None) Mode(Restore) Mode(Notify) }
+ shift-ctrl = { Mode(Save) Mode(Remove) Mode(Notify) Mode(Restore) }
+ up = Mode(Release)
+ }
+ Right = {
+ Pan(1)
+ up = Pan(0)
+ shift = Popup(Popup1)
+ ctrl = Display(CycleCrosshair)
+ }
+ Middle = {
+ Mode(Stroke)
+ up = Mode(Release)
+ ctrl = { Mode(Save) Mode(Copy) Mode(Notify) }
+ up-ctrl = { Mode(Notify) Mode(Restore) }
+ shift-ctrl = { Display(ToggleRubberbandMode) Mode(Save) Mode(Move) Mode(Notify) }
+ up-shift-ctrl = { Mode(Notify) Mode(Restore) Display(ToggleRubberbandMode) }
+ }
+ Up = {
+ Zoom(0.8)
+ shift = Scroll(up)
+ ctrl = Scroll(left)
+ }
+ Down = {
+ Zoom(1.25)
+ shift = Scroll(down)
+ ctrl = Scroll(right)
+ }
+# If you want zoom to center, do this instead.
+ #Up = { {Zoom(0.8) Center()} }
+ #Down = { {Zoom(1.25) Center()} }
+}
+
+MainMenu =
+{
+
+#
+# File Menu
+#
+ {"File"
+ {"Save Layout" Save(Layout) tip="Saves current layout" m=S a={"Ctrl-S" "Ctrl<Key>s"}}
+ {"Save Layout As..." Save(LayoutAs) tip="Saves current layout into a new file" m=A a={"Shift Ctrl-S" "Shift Ctrl<Key>s"}}
+ -
+ {"Revert" Load(Revert,none) tip="Revert to the layout stored on disk"}
+ -
+ {"Import Schematics" Import() }
+ {"Load layout" Load(Layout) tip="Load a layout from a file"}
+ {"Load element data to paste-buffer" PasteBuffer(Clear) Load(ElementTobuffer)}
+ {"Load layout data to paste-buffer" PasteBuffer(Clear) Load(LayoutTobuffer)}
+ {"Load netlist file" Load(Netlist)}
+ {"Load vendor resource file" LoadVendorFrom()}
+ -
+ {"Save connection data of"
+ {" a single element" GetXY(Click to set the element mark <>) Save(ElementConnections)}
+ {" all elements" Save(AllConnections)}
+ {" unused pins" Save(AllUnusedPins)}
+ }
+ -
+ {"Print layout..." Print()}
+ {"Export layout..." Export()}
+ {"Calibrate Printer..." PrintCalibrate()}
+ -
+ {"Start New Layout" New() a={"Ctrl-N" "Ctrl<Key>n"}}
+ -
+ {"Preferences..." DoWindows(Preferences)}
+ -
+ {"Quit Program" Quit() a={"Ctrl-Q" "Ctrl<Key>q"}}
+ }
+
+#
+# Edit Menu
+#
+ {"Edit"
+ {"Undo last operation" Undo() a={"U" "<Key>u"}}
+ {"Redo last undone operation" Redo() a={"Shift-R" "Shift<Key>r"}}
+ {"Clear undo-buffer" Undo(ClearList) a={"Shift-Ctrl-U" "Shift Ctrl<Key>u"}}
+ -
+ {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)
+ a={"Ctrl-X" "Ctrl<Key>x"}}
+ {"Copy selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) Unselect(All) Mode(PasteBuffer)
+ a={"Ctrl-C" "Ctrl<Key>c"}}
+ {"Paste buffer to layout" Mode(PasteBuffer) a={"Ctrl-V" "Ctrl<Key>v"}}
+ -
+ {"Unselect all" Unselect(All) a={"Shift-Alt-A" "Shift Alt<Key>a"}}
+ {"Select all visible" Select(All) a={"Alt-A" "Alt<Key>a"}}
+ -
+ {"Edit name of"
+ {"text on layout" ChangeName(Object) a={"N" "<Key>n"}}
+ {"layout" ChangeName(Layout)}
+ {"active layer" ChangeName(Layer)}
+ }
+ {"Edit attributes of"
+ {"Layout" Attributes(Layout)}
+ {"CurrentLayer" Attributes(Layer)}
+ {"Element" Attributes(Element)}
+ }
+ -
+ {"Route Styles" @routestyles
+ -
+ {"Edit..." AdjustStyle(0)}
+ }
+ }
+
+#
+# View Menu
+#
+ {"View"
+ {"Enable visible grid" checked=drawgrid Display(Grid)}
+ {"Grid units"
+ {"mil" checked=grid_units_mm,0 SetUnits(mil)}
+ {"mm" checked=grid_units_mm,1 SetUnits(mm)}
+ }
+ {"Grid size"
+ {"No Grid" checked=gridsize,1 SetValue(Grid,1)}
+ -
+ { "0.1 mil" checked=gridsize,10 SetUnits(mil) SetValue(Grid,10)}
+ { "1 mil" checked=gridsize,100 SetUnits(mil) SetValue(Grid,100)}
+ { "5 mil" checked=gridsize,500 SetUnits(mil) SetValue(Grid,500)}
+ { "10 mil" checked=gridsize,1000 SetUnits(mil) SetValue(Grid,1000)}
+ { "25 mil" checked=gridsize,2500 SetUnits(mil) SetValue(Grid,2500)}
+ { "50 mil" checked=gridsize,5000 SetUnits(mil) SetValue(Grid,5000)}
+ {"100 mil" checked=gridsize,10000 SetUnits(mil) SetValue(Grid,10000)}
+ -
+ {"0.01 mm" checked=gridsize,39 SetUnits(mm) SetValue(Grid,0.01mm)}
+ {"0.05 mm" checked=gridsize,197 SetUnits(mm) SetValue(Grid,0.05mm)}
+ {"0.1 mm" checked=gridsize,394 SetUnits(mm) SetValue(Grid,0.1mm)}
+ {"0.25 mm" checked=gridsize,984 SetUnits(mm) SetValue(Grid,0.25mm)}
+ {"0.5 mm" checked=gridsize,1969 SetUnits(mm) SetValue(Grid,0.5mm)}
+ {"1 mm" checked=gridsize,3937 SetUnits(mm) SetValue(Grid,1mm)}
+ -
+ {"Grid -5mil" SetValue(Grid,-5,mil) a={"Shift-G" "Shift<Key>g"}}
+ {"Grid +5mil" SetValue(Grid,+5,mil) a={"G" "<Key>g"}}
+ {"Grid -0.05mm" SetValue(Grid,-0.05,mm) a={"Shift-Ctrl-G" "Shift Ctrl<Key>g"}}
+ {"Grid +0.05mm" SetValue(Grid,+0.05,mm) a={"Ctrl-G" "Ctrl<Key>g"}}
+ }
+ {"Realign grid" GetXY(Click to set the grid origin) Display(ToggleGrid)}
+ -
+ {"Displayed element name"
+ {"Description" Display(Description) checked=elementname,1}
+ {"Reference Designator" Display(NameOnPCB) checked=elementname,2}
+ {"Value" Display(Value) checked=elementname,3}
+ }
+ {"Enable Pinout shows number" checked=shownumber Display(ToggleName)}
+ {"Pins/Via show Name/Number" Display(PinOrPadName) a={"D" "<Key>d"}}
+ -
+ {"Zoom In 20%" Zoom(-1.2) m=Z a={"Z" "<Key>z"}}
+ {"Zoom Out 20%" Zoom(+1.2) m=O a={"Shift-Z" "Shift<Key>z"}}
+ {"More zooms and view changes"
+ {"Zoom Max" Zoom() m=M a={"V" "<Key>v"}}
+ {"Zoom In 2X" Zoom(-2)}
+ {"Zoom Out 2X" Zoom(+2)}
+ {"Zoom to 0.1mil/px" Zoom(=10)}
+ {"Zoom to 0.01mm/px" Zoom(=39.37)}
+ {"Zoom to 1mil/px" Zoom(=100)}
+ {"Zoom to 0.05mm/px" Zoom(=196.8504)}
+ {"Zoom to 2.5mil/px" Zoom(=250)}
+ {"Zoom to 0.1mm/px" Zoom(=393.7)}
+ {"Zoom to 10mil/px" Zoom(=1000)}
+ {"Zoom In 20% and center" Zoom(-1.2) Center() m=Z }
+ {"Zoom Out 20% and center" Zoom(+1.2) Center() m=O }
+ {"Flip up/down" checked=flip_y SwapSides(V) a={"Tab" "<Key>Tab"}}
+ {"Flip left/right" checked=flip_x SwapSides(H) a={"Shift-Tab" "Shift<Key>Tab"}}
+ {"Spin 180 degrees" SwapSides(R) a={"Ctrl-Tab" "Ctrl<Key>Tab"}}
+ {"Swap Sides" SwapSides() a={"Ctrl-Shift-Tab" "Ctrl Shift<Key>Tab"}}
+ {"Center cursor" Center() a={"C" "<Key>c"}}
+ }
+ -
+ {"Shown Layers"
+ @layerview
+ -
+ {"Edit Layer Groups" EditLayerGroups()}
+ }
+ {"Current Layer"
+ @layerpick
+ -
+ {"Delete current layer" MoveLayer(c,-1)}
+ {"Add new layer" MoveLayer(-1,c)}
+ {"Move current layer up" MoveLayer(c,up)}
+ {"Move current layer down" MoveLayer(c,down)}
+ }
+ }
+
+#
+# Settings menu
+#
+ {"Settings"
+ {"'All-direction' lines" checked=alldirection Display(Toggle45Degree) a={"." "<Key>."}}
+ {"Auto swap line start angle" checked=swapstartdir Display(ToggleStartDirection)}
+ {"Orthogonal moves" checked=orthomove Display(ToggleOrthoMove)}
+ {"Crosshair snaps to pins and pads" checked=snappin Display(ToggleSnapPin)}
+ {"Crosshair shows DRC clearance" checked=showdrc Display(ToggleShowDRC)}
+ {"Auto enforce DRC clearance" checked=autodrc Display(ToggleAutoDRC)}
+ {"Lock Names" checked=locknames Display(ToggleLockNames)}
+ {"Only Names" checked=onlynames Display(ToggleOnlyNames)}
+ {"Hide Names" checked=hidenames Display(ToggleHideNames)}
+ -
+ {"Rubber band mode" checked=rubberband Display(ToggleRubberBandMode)}
+ {"Require unique element names" checked=uniquename Display(ToggleUniqueNames)}
+ {"Auto-zero delta measurements" checked=localref Display(ToggleLocalRef)}
+ {"New lines, arcs clear polygons" checked=clearnew Display(ToggleClearLine)}
+ {"New polygons are full ones" checked=newfullpoly Display(ToggleFullPoly)}
+ {"Show autorouter trials" checked=liveroute Display(ToggleLiveRoute)}
+ {"Thin draw" checked=thindraw Display(ToggleThindraw) a={"|" "<Key>|"}}
+ {"Thin draw poly" checked=thindrawpoly Display(ToggleThindrawPoly) a={"Ctrl-Shift-P" "Ctrl Shift<Key>p"}}
+ {"Check polygons" checked=checkplanes Display(ToggleCheckPlanes)}
+ -
+ {"Vendor drill mapping" ToggleVendor() checked=VendorMapOn}
+ {"Import New Elements at" m=I
+ {" Center" Import(setnewpoint,center) m=C}
+ {" Mark" Import(setnewpoint,mark) m=M}
+ {" Crosshair" Import(setnewpoint) m=h}
+ -
+ {"Set Dispersion" Import(setdisperse) m=D}
+ }
+ }
+
+#
+# Select menu
+#
+ {"Select"
+ {"Select all visible objects" Select(All)}
+ {"Select all connected objects" Select(Connection)}
+ -
+ {"Unselect all objects" Unselect(All)}
+ {"unselect all connected objects" Unselect(Connection)}
+ -
+ {"Select by name"
+ {"All objects" Select(ObjectByName) active=have_regex}
+ {"Elements" Select(ElementByName) active=have_regex}
+ {"Pads" Select(PadByName) active=have_regex}
+ {"Pins" Select(PinByName) active=have_regex}
+ {"Text" Select(TextByName) active=have_regex}
+ {"Vias" Select(ViaByName) active=have_regex}
+ }
+ -
+ {"Auto-place selected elements" AutoPlaceSelected() a={"Ctrl-P" "Ctrl<Key>p"}}
+ {"Disperse all elements" DisperseElements(All)}
+ {"Disperse selected elements" DisperseElements(Selected)}
+ -
+ {"Move selected elements to other side" Flip(SelectedElements) a={"Shift-B" "Shift<Key>b"}}
+ {"Move selected to current layer" MoveToCurrentLayer(Selected) a={"Shift-M" "Shift<Key>m"}}
+ {"Remove selected objects" RemoveSelected() a={"Shift-Delete" "Shift<Key>Delete"}}
+ {"Convert selection to element" Select(Convert)}
+ -
+ {"Optimize selected rats" DeleteRats(SelectedRats) AddRats(SelectedRats)}
+ {"Auto-route selected rats" AutoRoute(SelectedRats) a={"Alt-R" "Alt<Key>r"}}
+ {"Rip up selected auto-routed tracks" RipUp(Selected)}
+ -
+ {"Change size of selected objects"
+ {"Lines -10 mil" ChangeSize(SelectedLines,-10,mil) ChangeSize(SelectedArcs,-10,mil)}
+ {"Lines +10 mil" ChangeSize(SelectedLines,+10,mil) ChangeSize(SelectedArcs,+10,mil)}
+ {"Pads -10 mil" ChangeSize(SelectedPads,-10,mil)}
+ {"Pads +10 mil" ChangeSize(SelectedPads,+10,mil)}
+ {"Pins -10 mil" ChangeSize(SelectedPins,-10,mil)}
+ {"Pins +10 mil" ChangeSize(SelectedPins,+10,mil)}
+ {"Texts -10 mil" ChangeSize(SelectedTexts,-10,mil)}
+ {"Texts +10 mil" ChangeSize(SelectedTexts,+10,mil)}
+ {"Vias -10 mil" ChangeSize(SelectedVias,-10,mil)}
+ {"Vias +10 mil" ChangeSize(SelectedVias,+10,mil)}
+ }
+ -
+ {"Change drilling hole of selected objects"
+ {"Vias -10 mil" ChangeDrillSize(SelectedVias,-10,mil)}
+ {"Vias +10 mil" ChangeDrillSize(SelectedVias,+10,mil)}
+ {"Pins -10 mil" ChangeDrillSize(SelectedPins,-10,mil)}
+ {"Pins +10 mil" ChangeDrillSize(SelectedPins,+10,mil)}
+ }
+ -
+ {"Change square-flag of selected objects"
+ {"Elements" ChangeSquare(SelectedElements)}
+ {"Pins" ChangeSquare(SelectedPins)}
+ }
+ }
+
+#
+# Buffer menu
+#
+ {"Buffer"
+ {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)}
+ {"Paste buffer to layout" Mode(PasteBuffer)}
+ -
+ {"Rotate buffer 90 deg CCW" Mode(PasteBuffer) PasteBuffer(Rotate,1)
+ a={"Shift-F7" "Shift<Key>F7"}}
+ {"Rotate buffer 90 deg CW" Mode(PasteBuffer) PasteBuffer(Rotate,3)}
+ {"Arbitrarily Rotate Buffer" Mode(PasteBuffer) FreeRotateBuffer()}
+ {"Mirror buffer (up/down)" Mode(PasteBuffer) PasteBuffer(Mirror)}
+ {"Mirror buffer (left/right)" Mode(PasteBuffer) PasteBuffer(Rotate,1)
+ PasteBuffer(Mirror) PasteBuffer(Rotate,3)}
+ -
+ {"Clear buffer" PasteBuffer(Clear)}
+ {"Convert buffer to element" PasteBuffer(Convert)}
+ {"Break buffer elements to pieces" PasteBuffer(Restore)}
+ {"Save buffer elements to file" Save(PasteBuffer)}
+ -
+ {"Select Buffer #1" checked=buffer,1 PasteBuffer(1) m=1 a={"Shift-1" "Shift<Key>1"}}
+ {"Select Buffer #2" checked=buffer,2 PasteBuffer(2) m=2 a={"Shift-2" "Shift<Key>2"}}
+ {"Select Buffer #3" checked=buffer,3 PasteBuffer(3) m=3 a={"Shift-3" "Shift<Key>3"}}
+ {"Select Buffer #4" checked=buffer,4 PasteBuffer(4) m=4 a={"Shift-4" "Shift<Key>4"}}
+ {"Select Buffer #5" checked=buffer,5 PasteBuffer(5) m=5 a={"Shift-5" "Shift<Key>5"}}
+ }
+
+#
+# Connects menu
+#
+ {"Connects"
+ {"Lookup connection to object" GetXY(Click on the object) Connection(Find) a={"Ctrl-F" "Ctrl<Key>f"}}
+ {"Reset scanned pads/pins/vias" Connection(ResetPinsViasAndPads) Display(Redraw)}
+ {"Reset scanned lines/polygons" Connection(ResetLinesAndPolygons) Display(Redraw)}
+ {"Reset all connections" Connection(Reset) Display(Redraw) a={"Shift-F" "Shift<Key>f"}}
+ -
+ {"Optimize rats nest" Atomic(Save) DeleteRats(AllRats)
+ Atomic(Restore) AddRats(AllRats) Atomic(Block) a={"O" "<Key>o"}}
+ {"Erase rats nest" DeleteRats(AllRats) a={"E" "<Key>e"}}
+ {"Erase selected rats" DeleteRats(SelectedRats) a={"Shift-E" "Shift<Key>e"}}
+ -
+ {"Auto-route selected rats" AutoRoute(Selected)}
+ {"Auto-route all rats" AutoRoute(AllRats)}
+ {"Rip up all auto-routed tracks" RipUp(All)}
+ -
+ {"Optimize routed tracks"
+ {"Auto-Optimize" djopt(auto) a={"Shift-=" "Shift<Key>="}}
+ {"Debumpify" djopt(debumpify) }
+ {"Unjaggy" djopt(unjaggy) }
+ {"Vianudge" djopt(vianudge) }
+ {"Viatrim" djopt(viatrim) }
+ {"Ortho pull" djopt(orthopull) }
+ {"Simple optimization" djopt(simple) a={"=" "<Key>="}}
+ {"Miter" djopt(miter) }
+ {"Puller" a={"Y" "<Key>y"} Puller() }
+ {"Global Puller"
+ {"Selected" GlobalPuller(selected) }
+ {"Found" GlobalPuller(found) }
+ {"All" GlobalPuller() }
+ }
+ -
+ {"Only autorouted nets" OptAutoOnly() checked=optautoonly}
+ }
+ -
+ {"Design Rule Checker" DRC()}
+ -
+ {"Apply vendor drill mapping" ApplyVendor()}
+ }
+
+#
+# Info Menu
+#
+ {"Info"
+ {"Generate object report" ReportObject() a={"Ctrl-R" "Ctrl<Key>r"}}
+ {"Generate drill summary" Report(DrillReport)}
+ {"Report found pins/pads" Report(FoundPins)}
+ {"Key Bindings"
+ {"Remove" a={"Delete" "<Key>Delete"}
+ Mode(Save)
+ Mode(Remove)
+ Mode(Notify)
+ Mode(Restore)
+ }
+ {"Remove Selected" a={"Backspace" "<Key>BackSpace"}
+ RemoveSelected()
+ }
+ {"Remove Connected" a={"Shift-Backspace" "Shift<Key>BackSpace"}
+ Atomic(Save)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Restore)
+ Connection(Find)
+ Atomic(Restore)
+ Select(Connection)
+ Atomic(Restore)
+ RemoveSelected()
+ Atomic(Restore)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Block)
+ }
+ {"Remove Connected"
+ Atomic(Save)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Restore)
+ Connection(Find)
+ Atomic(Restore)
+ Select(Connection)
+ Atomic(Restore)
+ RemoveSelected()
+ Atomic(Restore)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Block)
+ }
+ {"Set Same" a={"A" "<Key>a"} SetSame()}
+ {"Flip Object" a={"B" "<Key>b"} Flip(Object)}
+ {"Find Connections" a={"F" "<Key>f"} Connection(Reset) Connection(Find)}
+ {"ToggleHideName Object" a={"H" "<Key>h"} ToggleHideName(Object)}
+ {"ToggleHideName SelectedElement" a={"Shift-H" "Shift<Key>h"} ToggleHideName(SelectedElements)}
+ {"ChangeHole Object" a={"Ctrl-H" "Ctrl<Key>h"} ChangeHole(Object)}
+ {"ChangeJoin Object" a={"J" "<Key>j"} ChangeJoin(Object)}
+ {"ChangeJoin SelectedObject" a={"Shift-J" "Shift<Key>j"} ChangeJoin(SelectedObjects)}
+ {"Clear Object +2 mil" a={"K" "<Key>k"} ChangeClearSize(Object,+2,mil)}
+ {"Clear Object -2 mil" a={"Shift-K" "Shift<Key>k"} ChangeClearSize(Object,-2,mil)}
+ {"Clear Selected +2 mil" a={"Ctrl-K" "Ctrl<Key>k"} ChangeClearSize(SelectedObjects,+2,mil)}
+ {"Clear Selected -2 mil" a={"Shift-Ctrl-K" "Shift Ctrl<Key>k"} ChangeClearSize(SelectedObjects,-2,mil)}
+ {"Line Tool size +5 mil" a={"L" "<Key>l"} SetValue(LineSize,+5,mil)}
+ {"Line Tool size -5 mil" a={"Shift-L" "Shift<Key>l"} SetValue(LineSize,-5,mil)}
+ {"Move Object to current layer" a={"M" "<Key>m"} MoveToCurrentLayer(Object)}
+ {"MarkCrosshair" a={"Ctrl-M" "Ctrl<Key>m"} MarkCrosshair()}
+ {"Select shortest rat" a={"Shift-N" "Shift<Key>n"} AddRats(Close)}
+ {"AddRats to selected pins" a={"Shift-O" "Shift<Key>o"}
+ Atomic(Save)
+ DeleteRats(AllRats)
+ Atomic(Restore)
+ AddRats(SelectedRats)
+ Atomic(Block) }
+ {"ChangeOctagon Object" a={"Ctrl-O" "Ctrl<Key>o"} ChangeOctagon(Object)}
+ {"Polygon PreviousPoint" a={"P" "<Key>p"} Polygon(PreviousPoint)}
+ {"Polygon Close" a={"Shift-P" "Shift<Key>p"} Polygon(Close)}
+ {"ChangeSquare Object" a={"Q" "<Key>q"} ChangeSquare(ToggleObject)}
+ {"ChangeSize +5 mil" a={"S" "<Key>s"} ChangeSize(Object,+5,mil)}
+ {"ChangeSize -5 mil" a={"Shift-S" "Shift<Key>s"} ChangeSize(Object,-5,mil)}
+ {"ChangeDrill +5 mil" a={"Alt-S" "Alt<Key>s"} ChangeDrillSize(Object,+5,mil)}
+ {"ChangeDrill -5 mil" a={"Alt-Shift-S" "Alt Shift<Key>s"} ChangeDrillSize(Object,-5,mil)}
+ {"Text Tool scale +10 mil" a={"T" "<Key>t"} SetValue(TextScale,+10,mil)}
+ {"Text Tool scale -10 mil" a={"Shift-T" "Shift<Key>t"} SetValue(TextScale,-10,mil)}
+ {"Via Tool size +5 mil" a={"Shift-V" "Shift<Key>v"} SetValue(ViaSize,+5,mil)}
+ {"Via Tool size -5 mil" a={"Shift-Ctrl-V" "Shift Ctrl<Key>v"} SetValue(ViaSize,-5,mil)}
+ {"Via Tool drill +5 mil" a={"Alt-V" "Alt<Key>v"} SetValue(ViaDrillingHole,+5,mil)}
+ {"Via Tool drill -5 mil" a={"Alt-Shift-V" "Alt Shift<Key>v"} SetValue(ViaDrillingHole,-5,mil)}
+ {"AddRats Selected" a={"Shift-W" "Shift<Key>w"} AddRats(SelectedRats)}
+ {"Add All Rats" a={"W" "<Key>w"} AddRats(AllRats)}
+ {"Cycle Clip" a={"/" "<Key>/"} Display(CycleClip)}
+ {"Arrow Mode" a={"Space" "<Key>space"} Mode(Arrow) checked=arrowmode,1}
+ {"Temp Arrow ON" a={"[" "<Key>["} Mode(Save) Mode(Arrow) Mode(Notify)}
+ {"Temp Arrow OFF" a={"]" "<Key>]"} Mode(Release) Mode(Restore)}
+ -
+ {"Step Up" a={"Up" "<Key>Up"} Cursor(Warp,0,1,grid)}
+ {"Step Down" a={"Down" "<Key>Down"} Cursor(Warp,0,-1,grid)}
+ {"Step Left" a={"Left" "<Key>Left"} Cursor(Warp,-1,0,grid)}
+ {"Step Right" a={"Right" "<Key>Right"} Cursor(Warp,1,0,grid)}
+ {"Step +Up" a={"Up" "Shift<Key>Up"} Cursor(Pan,0,50,view)}
+ {"Step +Down" a={"Down" "Shift<Key>Down"} Cursor(Pan,0,-50,view)}
+ {"Step +Left" a={"Left" "Shift<Key>Left"} Cursor(Pan,-50,0,view)}
+ {"Step +Right" a={"Right" "Shift<Key>Right"} Cursor(Pan,50,0,view)}
+ {'"Click"' a={"Enter" "<Key>Enter"} Mode(Notify) Mode(Release)}
+ -
+ }
+ }
+
+#
+# Window Menu
+#
+ {"Window"
+ {"Library" DoWindows(Library) a={"i" "<Key>i"}}
+ {"Message Log" DoWindows(Log)}
+ {"DRC Check" DoWindows(DRC)}
+ {"Netlist" DoWindows(Netlist)}
+ {"Command Entry" Command() a={":" "<Key>:"}}
+ {"Pinout" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
+ -
+ {"About..." About()}
+ }
+}
+
+PopupMenus =
+ {
+ Popup1 =
+ {
+ {"Operations on selections"
+ {"Unselect all objects" Unselect(All)}
+ {"Remove selected objects" RemoveSelected()}
+ {"Copy selection to buffer"
+ GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear)
+ PasteBuffer(AddSelected)
+ Mode(PasteBuffer)
+ }
+ {"Cut selection to buffer"
+ GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear)
+ PasteBuffer(AddSelected)
+ RemoveSelected()
+ Mode(PasteBuffer)
+ }
+ {"Convert selection to element" Select(Convert)}
+ {"Auto place selected elements" AutoPlaceSelected()}
+ {"Autoroute selected elements" AutoRoute(SelectedRats)}
+ {"Rip up selected auto-routed tracks" RipUp(Selected)}
+ }
+ {"Operations on this location"
+ {"Generate object report" GetXY(Click on the object) Report(Object)}
+ }
+ -
+ {"Undo last operation" Undo()}
+ {"Redo last undone operation" Redo()}
+ -
+ {Tools
+ {"None" checked=nomode,1 Mode(None)}
+ {"Via" checked=viamode,1 Mode(Via) a={"F1" "<Key>F1"}}
+ {"Line" checked=linemode,1 Mode(Line) a={"F2" "<Key>F2"}}
+ {"Arc" checked=arcmode,1 Mode(Arc) a={"F3" "<Key>F3"}}
+ {"Text" checked=textmode,1 Mode(Text) a={"F4" "<Key>F4"}}
+ {"Rectangle" checked=rectanglemode,1 Mode(Rectangle) a={"F5" "<Key>F5"}}
+ {"Polygon" checked=polygonmode,1 Mode(Polygon) a={"F6" "<Key>F6"}}
+ {"Polygon Hole" checked=polygonholemode,1 Mode(PolygonHole)}
+ {"Buffer" checked=pastebuffermode,1 Mode(PasteBuffer) a={"F7" "<Key>F7"}}
+ {"Remove" checked=removemode,1 Mode(Remove) a={"F8" "<Key>F8"}}
+ {"Rotate" checked=rotatemode,1 Mode(Rotate) a={"F9" "<Key>F9"}}
+ {"Thermal" checked=thermalmode,1 Mode(Thermal) a={"F10" "<Key>F10"}}
+ {"Arrow" checked=arrowmode,1 Mode(Arrow) a={"F11" "<Key>F11"}}
+ {"Insert Point" checked=insertpointmode,1 Mode(InsertPoint) a={"Insert" "<Key>Insert"}}
+ {"Move" checked=movemode,1 Mode(Move)}
+ {"Copy" checked=copymode,1 Mode(Copy)}
+ {"Lock" checked=lockmode,1 Mode(Lock) a={"F12" "<Key>F12"}}
+ {"Cancel" Mode(Escape) a={"Esc" "<Key>Escape"}}
+ }
+ }
+ }
+
diff --git a/src/pcb-menu.res b/src/pcb-menu.res
deleted file mode 100644
index 1e88e52..0000000
--- a/src/pcb-menu.res
+++ /dev/null
@@ -1,441 +0,0 @@
-# -*- c -*-
-# Note - pcb-menu.res is used to build pcb-menu.h
-# Note - parameters are sensitive to extra spaces around the commas
-
-Mouse =
-{
- Left = {
- Mode(Notify)
- up = Mode(Release)
- }
- Right = {
- { Mode(Save) Mode(Rotate) Mode(Notify) Mode(Release) Mode(Restore) }
- ctrl = Display(CycleCrosshair)
- }
- Middle = {
- Pan(1)
- up = Pan(0)
- ctrl = Pan(thumb,1)
- ctrl-up = Pan(thumb,0)
- }
- Up = Zoom(0.8)
- Down = Zoom(1.25)
-# If you want zoom to center, do this instead.
- #Up = { {Zoom(0.8) Center()} }
- #Down = { {Zoom(1.25) Center()} }
-}
-
-MainMenu =
-{
- {File
- {"About..." About()}
- {"Save layout" Save(Layout) m=S a={"Ctrl-S" "Ctrl<Key>s"}}
- {"Save layout as..." Save(LayoutAs) m=A a={"Shift Ctrl-S" "Shift Ctrl<Key>s"}}
- {"Revert" Load(Revert,none)}
- {"Import Schematics" Import() }
- {"Load layout" Load(Layout)}
- {"Load element data to paste-buffer" PasteBuffer(Clear) Load(ElementTobuffer)}
- {"Load layout data to paste-buffer" PasteBuffer(Clear) Load(LayoutTobuffer)}
- {"Load netlist file" Load(Netlist)}
- {"Load vendor resource file" LoadVendor()}
- {"Print layout..." Print()}
- {"Export layout..." Export()}
- {"Calibrate Printer..." PrintCalibrate()}
- -
- {"Save connection data of..." foreground=grey50 sensitive=false}
- {" a single element" GetXY(Click to set the element mark <>) Save(ElementConnections)}
- {" all elements" Save(AllConnections)}
- {" unused pins" Save(AllUnusedPins)}
- -
- {"Start new layout" New() a={"Ctrl-N" "Ctrl<Key>n"}}
- -
- {"Quit Program" Quit() m=Q a={"Ctrl-Q" "Ctrl<Key>q"}}
- }
- {View
- {"Flip up/down" checked=flip_y SwapSides(V) a={"Tab" "<Key>Tab"}}
- {"Flip left/right" checked=flip_x SwapSides(H) a={"Shift-Tab" "Shift<Key>Tab"}}
- {"Spin 180°" SwapSides(R) a={"Ctrl-Tab" "Ctrl<Key>Tab"}}
- {"Swap Sides" SwapSides() a={"Ctrl-Shift-Tab" "Ctrl Shift<Key>Tab"}}
- {"Center cursor" Center() a={"C" "<Key>c"}}
- {"Show soldermask" checked=showmask Display(ToggleMask)}
- -
- {"Displayed element-name..." foreground=grey50 sensitive=false}
- {"Description" Display(Description) checked=elementname,1}
- {"Reference Designator" Display(NameOnPCB) checked=elementname,2}
- {"Value" Display(Value) checked=elementname,3}
- {"Lock Names" checked=locknames Display(ToggleLockNames)}
- {"Only Names" checked=onlynames Display(ToggleOnlyNames)}
- {"Hide Names" checked=hidenames Display(ToggleHideNames)}
- -
- {"Pinout shows number" checked=shownumber Display(ToggleName)}
- {"Open pinout menu" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
- -
- {Zoom
- {"Zoom In 2X" Zoom(-2)}
- {"Zoom In 20%" Zoom(-1.2) m=Z a={"Z" "<Key>z"}}
- {"Zoom Out 20%" Zoom(+1.2) m=O a={"Shift-Z" "Shift<Key>z"}}
-# If you want zoom to center, do this instead.
- #{"Zoom In 20%" Zoom(-1.2) Center() m=Z a={"Z" "<Key>z"}}
- #{"Zoom Out 20%" Zoom(+1.2) Center() m=O a={"Shift-Z" "Shift<Key>z"}}
- {"Zoom Out 2X" Zoom(+2)}
- {"Zoom Max" Zoom() m=M a={"V" "<Key>v"}}
- {"Zoom Toggle" Zoom(Toggle) a={"`" "<Key>`"}}
- -
- {"Zoom to 0.1mil/px" Zoom(=10)}
- {"Zoom to 0.01mm/px" Zoom(=39.37)}
- {"Zoom to 1mil/px" Zoom(=100)}
- {"Zoom to 0.05mm/px" Zoom(=196.8504)}
- {"Zoom to 2.5mil/px" Zoom(=250)}
- {"Zoom to 0.1mm/px" Zoom(=393.7)}
- {"Zoom to 10mil/px" Zoom(=1000)}
- }
- {Grid
- {"mil" checked=grid_units_mm,0 SetUnits(mil)}
- {"mm" checked=grid_units_mm,1 SetUnits(mm)}
- {"Display grid" checked=drawgrid Display(Grid)}
- {"Realign grid" GetXY(Click to set the grid origin) Display(ToggleGrid)}
- {"No Grid" checked=gridsize,1 SetValue(Grid,1)}
- -
- { "0.1 mil" checked=gridsize,10 SetUnits(mil) SetValue(Grid,10)}
- { "1 mil" checked=gridsize,100 SetUnits(mil) SetValue(Grid,100)}
- { "5 mil" checked=gridsize,500 SetUnits(mil) SetValue(Grid,500)}
- { "10 mil" checked=gridsize,1000 SetUnits(mil) SetValue(Grid,1000)}
- { "25 mil" checked=gridsize,2500 SetUnits(mil) SetValue(Grid,2500)}
- { "50 mil" checked=gridsize,5000 SetUnits(mil) SetValue(Grid,5000)}
- {"100 mil" checked=gridsize,10000 SetUnits(mil) SetValue(Grid,10000)}
- -
- {"0.01 mm" checked=gridsize,39 SetUnits(mm) SetValue(Grid,0.01mm)}
- {"0.05 mm" checked=gridsize,197 SetUnits(mm) SetValue(Grid,0.05mm)}
- {"0.1 mm" checked=gridsize,394 SetUnits(mm) SetValue(Grid,0.1mm)}
- {"0.25 mm" checked=gridsize,984 SetUnits(mm) SetValue(Grid,0.25mm)}
- {"0.5 mm" checked=gridsize,1969 SetUnits(mm) SetValue(Grid,0.5mm)}
- {"1 mm" checked=gridsize,3937 SetUnits(mm) SetValue(Grid,1mm)}
- -
- {"Grid -5mil" SetValue(Grid,-5,mil) a={"Shift-G" "Shift<Key>g"}}
- {"Grid +5mil" SetValue(Grid,+5,mil) a={"G" "<Key>g"}}
- {"Grid -0.05mm" SetValue(Grid,-0.05,mm) a={"Shift-Ctrl-G" "Shift Ctrl<Key>g"}}
- {"Grid +0.05mm" SetValue(Grid,+0.05,mm) a={"Ctrl-G" "Ctrl<Key>g"}}
- }
- -
- {"Shown Layers"
- @layerview
- -
- {"Edit Layer Groups" EditLayerGroups()}
- }
- {"Current Layer"
- @layerpick
- -
- {"Delete current layer" MoveLayer(c,-1)}
- {"Add new layer" MoveLayer(-1,c)}
- {"Move current layer up" MoveLayer(c,up)}
- {"Move current layer down" MoveLayer(c,down)}
- }
- }
- {Edit
- {"Undo last operation" Undo() a={"U" "<Key>u"}}
- {"Redo last undone operation" Redo() a={"Shift-R" "Shift<Key>r"}}
- {"Clear undo-buffer" Undo(ClearList) a={"Shift-Ctrl-U" "Shift Ctrl<Key>u"}}
- -
- {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)
- a={"Ctrl-X" "Ctrl<Key>x"}}
- {"Copy selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) Mode(PasteBuffer)
- a={"Ctrl-C" "Ctrl<Key>c"}}
- {"Paste buffer to layout" Mode(PasteBuffer) a={"Ctrl-V" "Ctrl<Key>v"}}
- -
- {"Unselect all" Unselect(All) a={"Shift-Alt-A" "Shift Alt<Key>a"}}
- {"Select all visible" Select(All) a={"Alt-A" "Alt<Key>a"}}
- -
- {"Edit Names..." foreground=grey50 sensitive=false}
- {" Change text on layout" ChangeName(Object) a={"N" "<Key>n"}}
- {" Edit name of layout" ChangeName(Layout)}
- {" Edit name of active layer" ChangeName(Layer)}
- {"Edit Attributes..." foreground=grey50 sensitive=false}
- {" Layout" Attributes(Layout)}
- {" CurrentLayer" Attributes(Layer)}
- {" Element" Attributes(Element)}
- -
- {"Board Sizes" AdjustSizes()}
- {"Route Styles"
- @routestyles
- -
- {"Edit..." AdjustStyle(0)}
- }
- }
- {Tools
- {"None" checked=nomode,1 Mode(None)}
- {"Via" checked=viamode,1 Mode(Via) a={"F1" "<Key>F1"}}
- {"Line" checked=linemode,1 Mode(Line) a={"F2" "<Key>F2"}}
- {"Arc" checked=arcmode,1 Mode(Arc) a={"F3" "<Key>F3"}}
- {"Text" checked=textmode,1 Mode(Text) a={"F4" "<Key>F4"}}
- {"Rectangle" checked=rectanglemode,1 Mode(Rectangle) a={"F5" "<Key>F5"}}
- {"Polygon" checked=polygonmode,1 Mode(Polygon) a={"F6" "<Key>F6"}}
- {"Polygon Hole" checked=polygonholemode,1 Mode(PolygonHole)}
- {"Buffer" checked=pastebuffermode,1 Mode(PasteBuffer) a={"F7" "<Key>F7"}}
- {"Remove" checked=removemode,1 Mode(Remove) a={"F8" "<Key>F8"}}
- {"Rotate" checked=rotatemode,1 Mode(Rotate) a={"F9" "<Key>F9"}}
- {"Thermal" checked=thermalmode,1 Mode(Thermal) a={"F10" "<Key>F10"}}
- {"Arrow" checked=arrowmode,1 Mode(Arrow) a={"F11" "<Key>F11"}}
- {"Insert Point" checked=insertpointmode,1 Mode(InsertPoint) a={"Insert" "<Key>Insert"}}
- {"Move" checked=movemode,1 Mode(Move)}
- {"Copy" checked=copymode,1 Mode(Copy)}
- {"Lock" checked=lockmode,1 Mode(Lock) a={"F12" "<Key>F12"}}
- {"Cancel" Mode(Cancel) a={"Esc" "<Key>Escape"}}
- -
- {"Command" Command() a={":" "<Key>:"}}
- }
- {Settings
- {"Layer groups" foreground=grey50 sensitive=false}
- {"Edit layer groupings" EditLayerGroups()}
- -
- {"'All-direction' lines" checked=alldirection Display(Toggle45Degree) a={"." "<Key>."}}
- {"Auto swap line start angle" checked=swapstartdir Display(ToggleStartDirection)}
- {"Orthogonal moves" checked=orthomove Display(ToggleOrthoMove)}
- {"Crosshair snaps to pins and pads" checked=snappin Display(ToggleSnapPin)}
- {"Crosshair shows DRC clearance" checked=showdrc Display(ToggleShowDRC)}
- {"Auto enforce DRC clearance" checked=autodrc Display(ToggleAutoDRC)}
- -
- {"Rubber band mode" checked=rubberband Display(ToggleRubberBandMode)}
- {"Require unique element names" checked=uniquename Display(ToggleUniqueNames)}
- {"Auto-zero delta measurements" checked=localref Display(ToggleLocalRef)}
- {"New lines, arcs clear polygons" checked=clearnew Display(ToggleClearLine)}
- {"New polygons are full ones" checked=newfullpoly Display(ToggleFullPoly)}
- {"Show autorouter trials" checked=liveroute Display(ToggleLiveRoute)}
- {"Thin draw" checked=thindraw Display(ToggleThindraw) a={"|" "<Key>|"}}
- {"Thin draw poly" checked=thindrawpoly Display(ToggleThindrawPoly) a={"Ctrl-Shift-P" "Ctrl Shift<Key>p"}}
- {"Check polygons" checked=checkplanes Display(ToggleCheckPlanes)}
- -
- {"Pinout shows number" checked=shownumber Display(ToggleName)}
- {"Pins/Via show Name/Number" Display(PinOrPadName) a={"D" "<Key>d"}}
- {"Enable vendor drill mapping" ToggleVendor() checked=VendorMapOn}
- {"Import Settings"
- {"New elements added at..." foreground=grey50 sensitive=false}
- {" Center" Import(setnewpoint,center)}
- {" Mark" Import(setnewpoint,mark)}
- {" Crosshair" Import(setnewpoint)}
- -
- {"Set Dispersion" Import(setdisperse)}
- }
- }
-
- {Select
- {"Select all visible objects" Select(All)}
- {"Select all connected objects" Select(Connection)}
- -
- {"Unselect all objects" Unselect(All)}
- {"unselect all connected objects" Unselect(Connection)}
- -
- {"Select by name" foreground=grey50 sensitive=false}
- {"All objects" Select(ObjectByName) active=have_regex}
- {"Elements" Select(ElementByName) active=have_regex}
- {"Pads" Select(PadByName) active=have_regex}
- {"Pins" Select(PinByName) active=have_regex}
- {"Text Objects" Select(TextByName) active=have_regex}
- {"Vias" Select(ViaByName) active=have_regex}
- -
- {"Auto-place selected elements" AutoPlaceSelected() a={"Ctrl-P" "Ctrl<Key>p"}}
- {"Disperse all elements" DisperseElements(All)}
- {"Move selected elements to other side" Flip(SelectedElements) a={"Shift-B" "Shift<Key>b"}}
- {"Move selected to current layer" MoveToCurrentLayer(Selected) a={"Shift-M" "Shift<Key>m"}}
- {"Delete selected objects" Delete(Selected) a={"Delete" "<Key>Delete"}}
- {"Convert selection to element" Select(Convert)}
- -
- {"Optimize selected rats" DeleteRats(SelectedRats) AddRats(SelectedRats)}
- {"Auto-route selected rats" AutoRoute(SelectedRats) a={"Alt-R" "Alt<Key>r"}}
- {"Rip up selected auto-routed tracks" RipUp(Selected)}
- -
- {"Change size of selected objects" foreground=grey50 sensitive=false}
- {"Lines -10 mil" ChangeSize(SelectedLines,-10,mil) ChangeSize(SelectedArcs,-10,mil)}
- {"Lines +10 mil" ChangeSize(SelectedLines,+10,mil) ChangeSize(SelectedArcs,+10,mil)}
- {"Pads -10 mil" ChangeSize(SelectedPads,-10,mil)}
- {"Pads +10 mil" ChangeSize(SelectedPads,+10,mil)}
- {"Pins -10 mil" ChangeSize(SelectedPins,-10,mil)}
- {"Pins +10 mil" ChangeSize(SelectedPins,+10,mil)}
- {"Texts -10 mil" ChangeSize(SelectedTexts,-10,mil)}
- {"Texts +10 mil" ChangeSize(SelectedTexts,+10,mil)}
- {"Vias -10 mil" ChangeSize(SelectedVias,-10,mil)}
- {"Vias +10 mil" ChangeSize(SelectedVias,+10,mil)}
- -
- {"Change drilling hole of selected objects" foreground=grey50 sensitive=false}
- {"Vias -10 mil" ChangeDrillSize(SelectedVias,-10,mil)}
- {"Vias +10 mil" ChangeDrillSize(SelectedVias,+10,mil)}
- {"Pins -10 mil" ChangeDrillSize(SelectedPins,-10,mil)}
- {"Pins +10 mil" ChangeDrillSize(SelectedPins,+10,mil)}
- -
- {"Change square-flag of selected objects" foreground=grey50 sensitive=false}
- {"Elements" ChangeSquare(SelectedElements)}
- {"Pins" ChangeSquare(SelectedPins)}
- }
-
- {Buffer
- {"Copy selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) Mode(PasteBuffer)}
- {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
- PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)}
- {"Paste buffer to layout" Mode(PasteBuffer)}
- -
- {"Rotate buffer 90 deg CCW" Mode(PasteBuffer) PasteBuffer(Rotate,1)
- a={"Shift-F7" "Shift<Key>F7"}}
- {"Rotate buffer 90 deg CW" Mode(PasteBuffer) PasteBuffer(Rotate,3)}
- {"Arbitrarily Rotate Buffer" Mode(PasteBuffer) FreeRotateBuffer()}
- {"Mirror buffer (up/down)" Mode(PasteBuffer) PasteBuffer(Mirror)}
- {"Mirror buffer (left/right)" Mode(PasteBuffer) PasteBuffer(Rotate,1)
- PasteBuffer(Mirror) PasteBuffer(Rotate,3)}
- -
- {"Clear buffer" PasteBuffer(Clear)}
- {"Convert buffer to element" PasteBuffer(Convert)}
- {"Break buffer elements to pieces" PasteBuffer(Restore)}
- {"Save buffer elements to file" Save(PasteBuffer)}
- -
- {"Select current buffer" foreground=grey50 sensitive=false}
- {"#1" checked=buffer,1 PasteBuffer(1) a={"Shift-1" "Shift<Key>1"}}
- {"#2" checked=buffer,2 PasteBuffer(2) a={"Shift-2" "Shift<Key>2"}}
- {"#3" checked=buffer,3 PasteBuffer(3) a={"Shift-3" "Shift<Key>3"}}
- {"#4" checked=buffer,4 PasteBuffer(4) a={"Shift-4" "Shift<Key>4"}}
- {"#5" checked=buffer,5 PasteBuffer(5) a={"Shift-5" "Shift<Key>5"}}
- }
-
- {Connects
- {"Lookup connection to object" GetXY(Click on the object) Connection(Find) a={"Ctrl-F" "Ctrl<Key>f"}}
- {"Reset scanned pads/pins/vias" Connection(ResetPinsViasAndPads) Display(Redraw)}
- {"Reset scanned lines/polygons" Connection(ResetLinesAndPolygons) Display(Redraw)}
- {"Reset all connections" Connection(Reset) Display(Redraw) a={"Shift-F" "Shift<Key>f"}}
- -
- {"Optimize rats-nest" Atomic(Save) DeleteRats(AllRats)
- Atomic(Restore) AddRats(AllRats) Atomic(Block) a={"O" "<Key>o"}}
- {"Erase rats-nest" DeleteRats(AllRats) a={"E" "<Key>e"}}
- {"Erase selected rats" DeleteRats(SelectedRats) a={"Shift-E" "Shift<Key>e"}}
- -
- {"Auto-route selected rats" AutoRoute(Selected)}
- {"Auto-route all rats" AutoRoute(AllRats)}
- {"Rip up all auto-routed tracks" RipUp(All)}
- -
- {"Auto-Optimize" djopt(auto) a={"Shift-=" "Shift<Key>="}}
- {"Debumpify" djopt(debumpify) }
- {"Unjaggy" djopt(unjaggy) }
- {"Vianudge" djopt(vianudge) }
- {"Viatrim" djopt(viatrim) }
- {"Orthopull" djopt(orthopull) }
- {"SimpleOpts" djopt(simple) a={"=" "<Key>="}}
- {"Miter" djopt(miter) }
- {"Puller" a={"Y" "<Key>y"} Puller() }
- {"Global Puller"
- {"Selected" GlobalPuller(selected) }
- {"Found" GlobalPuller(found) }
- {"All" GlobalPuller() }
- }
- {"Only autorouted nets" OptAutoOnly() checked=optautoonly}
- -
- {"Design Rule Checker" DRC()}
- -
- {"Apply vendor drill mapping" ApplyVendor()}
- }
-
- {Info
- {"Generate object report" ReportObject() a={"Ctrl-R" "Ctrl<Key>r"}}
- {"Generate drill summary" Report(DrillReport)}
- {"Report found pins/pads" Report(FoundPins)}
- {"Report net length" Report(NetLength) a={"R" "<Key>r"}}
- {"Key Bindings"
- {"Remove" a={"Backspace" "<Key>BackSpace"}
- Delete(Selected)
- }
- {"Remove Connected" a={"Shift-Backspace" "Shift<Key>BackSpace"}
- Atomic(Save)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Restore)
- Connection(Find)
- Atomic(Restore)
- Select(Connection)
- Atomic(Restore)
- RemoveSelected()
- Atomic(Restore)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Block)
- }
- {"Remove Connected" a={"Shift-Delete" "Shift<Key>Delete"}
- Atomic(Save)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Restore)
- Connection(Find)
- Atomic(Restore)
- Select(Connection)
- Atomic(Restore)
- RemoveSelected()
- Atomic(Restore)
- Connection(Reset)
- Atomic(Restore)
- Unselect(All)
- Atomic(Block)
- }
- {"Set Same" a={"A" "<Key>a"} SetSame()}
- {"Flip Object" a={"B" "<Key>b"} Flip(Object)}
- {"Find Connections" a={"F" "<Key>f"} Connection(Reset) Connection(Find)}
- {"ToggleHideName Object" a={"H" "<Key>h"} ToggleHideName(Object)}
- {"ToggleHideName SelectedElement" a={"Shift-H" "Shift<Key>h"} ToggleHideName(SelectedElements)}
- {"ChangeHole Object" a={"Ctrl-H" "Ctrl<Key>h"} ChangeHole(Object)}
- {"ChangeJoin Object" a={"J" "<Key>j"} ChangeJoin(Object)}
- {"ChangeJoin SelectedObject" a={"Shift-J" "Shift<Key>j"} ChangeJoin(SelectedObjects)}
- {"Clear Object +2 mil" a={"K" "<Key>k"} ChangeClearSize(Object,+2,mil)}
- {"Clear Object -2 mil" a={"Shift-K" "Shift<Key>k"} ChangeClearSize(Object,-2,mil)}
- {"Clear Selected +2 mil" a={"Ctrl-K" "Ctrl<Key>k"} ChangeClearSize(SelectedObjects,+2,mil)}
- {"Clear Selected -2 mil" a={"Shift-Ctrl-K" "Shift Ctrl<Key>k"} ChangeClearSize(SelectedObjects,-2,mil)}
- {"Line Tool size +5 mil" a={"L" "<Key>l"} SetValue(LineSize,+5,mil)}
- {"Line Tool size -5 mil" a={"Shift-L" "Shift<Key>l"} SetValue(LineSize,-5,mil)}
- {"Move Object to current layer" a={"M" "<Key>m"} MoveToCurrentLayer(Object)}
- {"MarkCrosshair" a={"Ctrl-M" "Ctrl<Key>m"} MarkCrosshair()}
- {"Select shortest rat" a={"Shift-N" "Shift<Key>n"} AddRats(Close)}
- {"AddRats to selected pins" a={"Shift-O" "Shift<Key>o"}
- Atomic(Save)
- DeleteRats(AllRats)
- Atomic(Restore)
- AddRats(SelectedRats)
- Atomic(Block) }
- {"ChangeOctagon Object" a={"Ctrl-O" "Ctrl<Key>o"} ChangeOctagon(Object)}
- {"Polygon PreviousPoint" a={"P" "<Key>p"} Polygon(PreviousPoint)}
- {"Polygon Close" a={"Shift-P" "Shift<Key>p"} Polygon(Close)}
- {"ChangeSquare Object" a={"Q" "<Key>q"} ChangeSquare(Object)}
- {"ChangeSize +5 mil" a={"S" "<Key>s"} ChangeSize(Object,+5,mil)}
- {"ChangeSize -5 mil" a={"Shift-S" "Shift<Key>s"} ChangeSize(Object,-5,mil)}
- {"ChangeDrill +5 mil" a={"Alt-S" "Alt<Key>s"} ChangeDrillSize(Object,+5,mil)}
- {"ChangeDrill -5 mil" a={"Alt-Shift-S" "Alt Shift<Key>s"} ChangeDrillSize(Object,-5,mil)}
- {"Text Tool scale +10 mil" a={"T" "<Key>t"} SetValue(TextScale,+10,mil)}
- {"Text Tool scale -10 mil" a={"Shift-T" "Shift<Key>t"} SetValue(TextScale,-10,mil)}
- {"Via Tool size +5 mil" a={"Shift-V" "Shift<Key>v"} SetValue(ViaSize,+5,mil)}
- {"Via Tool size -5 mil" a={"Shift-Ctrl-V" "Shift Ctrl<Key>v"} SetValue(ViaSize,-5,mil)}
- {"Via Tool drill +5 mil" a={"Alt-V" "Alt<Key>v"} SetValue(ViaDrillingHole,+5,mil)}
- {"Via Tool drill -5 mil" a={"Alt-Shift-V" "Alt Shift<Key>v"} SetValue(ViaDrillingHole,-5,mil)}
- {"AddRats Selected" a={"Shift-W" "Shift<Key>w"} AddRats(SelectedRats)}
- {"Add All Rats" a={"W" "<Key>w"} AddRats(AllRats)}
- {"Undo" a={"Alt-Z" "Alt<Key>z"} Undo()}
- {"Cycle Clip" a={"/" "<Key>/"} Display(CycleClip)}
- {"Arrow" a={"Space" "<Key>space"} Mode(Arrow) checked=arrowmode,1}
- {"Temp Arrow ON" a={"[" "<Key>["} Mode(Save) Mode(Arrow) Mode(Notify)}
- {"Temp Arrow OFF" a={"]" "<Key>]"} Mode(Release) Mode(Restore)}
-
- {"Step Up" a={"Up" "<Key>Up"} Cursor(Warp,0,1,grid)}
- {"Step Down" a={"Down" "<Key>Down"} Cursor(Warp,0,-1,grid)}
- {"Step Left" a={"Left" "<Key>Left"} Cursor(Warp,-1,0,grid)}
- {"Step Right" a={"Right" "<Key>Right"} Cursor(Warp,1,0,grid)}
- {"Step +Up" a={"Up" "Shift<Key>Up"} Cursor(Pan,0,50,view)}
- {"Step +Down" a={"Down" "Shift<Key>Down"} Cursor(Pan,0,-50,view)}
- {"Step +Left" a={"Left" "Shift<Key>Left"} Cursor(Pan,-50,0,view)}
- {"Step +Right" a={"Right" "Shift<Key>Right"} Cursor(Pan,50,0,view)}
- {'"Click"' a={"Enter" "<Key>Enter"} Mode(Notify) Mode(Release) }
- }
- }
- {Window
- {"Board Layout" DoWindows(Layout)}
- {"Library" DoWindows(Library)}
- {"Message Log" DoWindows(Log)}
- {"Netlist" DoWindows(Netlist)}
- {"Pinout" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
- }
-}
diff --git a/src/pcb-menu.res.in b/src/pcb-menu.res.in
new file mode 100644
index 0000000..1e88e52
--- /dev/null
+++ b/src/pcb-menu.res.in
@@ -0,0 +1,441 @@
+# -*- c -*-
+# Note - pcb-menu.res is used to build pcb-menu.h
+# Note - parameters are sensitive to extra spaces around the commas
+
+Mouse =
+{
+ Left = {
+ Mode(Notify)
+ up = Mode(Release)
+ }
+ Right = {
+ { Mode(Save) Mode(Rotate) Mode(Notify) Mode(Release) Mode(Restore) }
+ ctrl = Display(CycleCrosshair)
+ }
+ Middle = {
+ Pan(1)
+ up = Pan(0)
+ ctrl = Pan(thumb,1)
+ ctrl-up = Pan(thumb,0)
+ }
+ Up = Zoom(0.8)
+ Down = Zoom(1.25)
+# If you want zoom to center, do this instead.
+ #Up = { {Zoom(0.8) Center()} }
+ #Down = { {Zoom(1.25) Center()} }
+}
+
+MainMenu =
+{
+ {File
+ {"About..." About()}
+ {"Save layout" Save(Layout) m=S a={"Ctrl-S" "Ctrl<Key>s"}}
+ {"Save layout as..." Save(LayoutAs) m=A a={"Shift Ctrl-S" "Shift Ctrl<Key>s"}}
+ {"Revert" Load(Revert,none)}
+ {"Import Schematics" Import() }
+ {"Load layout" Load(Layout)}
+ {"Load element data to paste-buffer" PasteBuffer(Clear) Load(ElementTobuffer)}
+ {"Load layout data to paste-buffer" PasteBuffer(Clear) Load(LayoutTobuffer)}
+ {"Load netlist file" Load(Netlist)}
+ {"Load vendor resource file" LoadVendor()}
+ {"Print layout..." Print()}
+ {"Export layout..." Export()}
+ {"Calibrate Printer..." PrintCalibrate()}
+ -
+ {"Save connection data of..." foreground=grey50 sensitive=false}
+ {" a single element" GetXY(Click to set the element mark <>) Save(ElementConnections)}
+ {" all elements" Save(AllConnections)}
+ {" unused pins" Save(AllUnusedPins)}
+ -
+ {"Start new layout" New() a={"Ctrl-N" "Ctrl<Key>n"}}
+ -
+ {"Quit Program" Quit() m=Q a={"Ctrl-Q" "Ctrl<Key>q"}}
+ }
+ {View
+ {"Flip up/down" checked=flip_y SwapSides(V) a={"Tab" "<Key>Tab"}}
+ {"Flip left/right" checked=flip_x SwapSides(H) a={"Shift-Tab" "Shift<Key>Tab"}}
+ {"Spin 180°" SwapSides(R) a={"Ctrl-Tab" "Ctrl<Key>Tab"}}
+ {"Swap Sides" SwapSides() a={"Ctrl-Shift-Tab" "Ctrl Shift<Key>Tab"}}
+ {"Center cursor" Center() a={"C" "<Key>c"}}
+ {"Show soldermask" checked=showmask Display(ToggleMask)}
+ -
+ {"Displayed element-name..." foreground=grey50 sensitive=false}
+ {"Description" Display(Description) checked=elementname,1}
+ {"Reference Designator" Display(NameOnPCB) checked=elementname,2}
+ {"Value" Display(Value) checked=elementname,3}
+ {"Lock Names" checked=locknames Display(ToggleLockNames)}
+ {"Only Names" checked=onlynames Display(ToggleOnlyNames)}
+ {"Hide Names" checked=hidenames Display(ToggleHideNames)}
+ -
+ {"Pinout shows number" checked=shownumber Display(ToggleName)}
+ {"Open pinout menu" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
+ -
+ {Zoom
+ {"Zoom In 2X" Zoom(-2)}
+ {"Zoom In 20%" Zoom(-1.2) m=Z a={"Z" "<Key>z"}}
+ {"Zoom Out 20%" Zoom(+1.2) m=O a={"Shift-Z" "Shift<Key>z"}}
+# If you want zoom to center, do this instead.
+ #{"Zoom In 20%" Zoom(-1.2) Center() m=Z a={"Z" "<Key>z"}}
+ #{"Zoom Out 20%" Zoom(+1.2) Center() m=O a={"Shift-Z" "Shift<Key>z"}}
+ {"Zoom Out 2X" Zoom(+2)}
+ {"Zoom Max" Zoom() m=M a={"V" "<Key>v"}}
+ {"Zoom Toggle" Zoom(Toggle) a={"`" "<Key>`"}}
+ -
+ {"Zoom to 0.1mil/px" Zoom(=10)}
+ {"Zoom to 0.01mm/px" Zoom(=39.37)}
+ {"Zoom to 1mil/px" Zoom(=100)}
+ {"Zoom to 0.05mm/px" Zoom(=196.8504)}
+ {"Zoom to 2.5mil/px" Zoom(=250)}
+ {"Zoom to 0.1mm/px" Zoom(=393.7)}
+ {"Zoom to 10mil/px" Zoom(=1000)}
+ }
+ {Grid
+ {"mil" checked=grid_units_mm,0 SetUnits(mil)}
+ {"mm" checked=grid_units_mm,1 SetUnits(mm)}
+ {"Display grid" checked=drawgrid Display(Grid)}
+ {"Realign grid" GetXY(Click to set the grid origin) Display(ToggleGrid)}
+ {"No Grid" checked=gridsize,1 SetValue(Grid,1)}
+ -
+ { "0.1 mil" checked=gridsize,10 SetUnits(mil) SetValue(Grid,10)}
+ { "1 mil" checked=gridsize,100 SetUnits(mil) SetValue(Grid,100)}
+ { "5 mil" checked=gridsize,500 SetUnits(mil) SetValue(Grid,500)}
+ { "10 mil" checked=gridsize,1000 SetUnits(mil) SetValue(Grid,1000)}
+ { "25 mil" checked=gridsize,2500 SetUnits(mil) SetValue(Grid,2500)}
+ { "50 mil" checked=gridsize,5000 SetUnits(mil) SetValue(Grid,5000)}
+ {"100 mil" checked=gridsize,10000 SetUnits(mil) SetValue(Grid,10000)}
+ -
+ {"0.01 mm" checked=gridsize,39 SetUnits(mm) SetValue(Grid,0.01mm)}
+ {"0.05 mm" checked=gridsize,197 SetUnits(mm) SetValue(Grid,0.05mm)}
+ {"0.1 mm" checked=gridsize,394 SetUnits(mm) SetValue(Grid,0.1mm)}
+ {"0.25 mm" checked=gridsize,984 SetUnits(mm) SetValue(Grid,0.25mm)}
+ {"0.5 mm" checked=gridsize,1969 SetUnits(mm) SetValue(Grid,0.5mm)}
+ {"1 mm" checked=gridsize,3937 SetUnits(mm) SetValue(Grid,1mm)}
+ -
+ {"Grid -5mil" SetValue(Grid,-5,mil) a={"Shift-G" "Shift<Key>g"}}
+ {"Grid +5mil" SetValue(Grid,+5,mil) a={"G" "<Key>g"}}
+ {"Grid -0.05mm" SetValue(Grid,-0.05,mm) a={"Shift-Ctrl-G" "Shift Ctrl<Key>g"}}
+ {"Grid +0.05mm" SetValue(Grid,+0.05,mm) a={"Ctrl-G" "Ctrl<Key>g"}}
+ }
+ -
+ {"Shown Layers"
+ @layerview
+ -
+ {"Edit Layer Groups" EditLayerGroups()}
+ }
+ {"Current Layer"
+ @layerpick
+ -
+ {"Delete current layer" MoveLayer(c,-1)}
+ {"Add new layer" MoveLayer(-1,c)}
+ {"Move current layer up" MoveLayer(c,up)}
+ {"Move current layer down" MoveLayer(c,down)}
+ }
+ }
+ {Edit
+ {"Undo last operation" Undo() a={"U" "<Key>u"}}
+ {"Redo last undone operation" Redo() a={"Shift-R" "Shift<Key>r"}}
+ {"Clear undo-buffer" Undo(ClearList) a={"Shift-Ctrl-U" "Shift Ctrl<Key>u"}}
+ -
+ {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)
+ a={"Ctrl-X" "Ctrl<Key>x"}}
+ {"Copy selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) Mode(PasteBuffer)
+ a={"Ctrl-C" "Ctrl<Key>c"}}
+ {"Paste buffer to layout" Mode(PasteBuffer) a={"Ctrl-V" "Ctrl<Key>v"}}
+ -
+ {"Unselect all" Unselect(All) a={"Shift-Alt-A" "Shift Alt<Key>a"}}
+ {"Select all visible" Select(All) a={"Alt-A" "Alt<Key>a"}}
+ -
+ {"Edit Names..." foreground=grey50 sensitive=false}
+ {" Change text on layout" ChangeName(Object) a={"N" "<Key>n"}}
+ {" Edit name of layout" ChangeName(Layout)}
+ {" Edit name of active layer" ChangeName(Layer)}
+ {"Edit Attributes..." foreground=grey50 sensitive=false}
+ {" Layout" Attributes(Layout)}
+ {" CurrentLayer" Attributes(Layer)}
+ {" Element" Attributes(Element)}
+ -
+ {"Board Sizes" AdjustSizes()}
+ {"Route Styles"
+ @routestyles
+ -
+ {"Edit..." AdjustStyle(0)}
+ }
+ }
+ {Tools
+ {"None" checked=nomode,1 Mode(None)}
+ {"Via" checked=viamode,1 Mode(Via) a={"F1" "<Key>F1"}}
+ {"Line" checked=linemode,1 Mode(Line) a={"F2" "<Key>F2"}}
+ {"Arc" checked=arcmode,1 Mode(Arc) a={"F3" "<Key>F3"}}
+ {"Text" checked=textmode,1 Mode(Text) a={"F4" "<Key>F4"}}
+ {"Rectangle" checked=rectanglemode,1 Mode(Rectangle) a={"F5" "<Key>F5"}}
+ {"Polygon" checked=polygonmode,1 Mode(Polygon) a={"F6" "<Key>F6"}}
+ {"Polygon Hole" checked=polygonholemode,1 Mode(PolygonHole)}
+ {"Buffer" checked=pastebuffermode,1 Mode(PasteBuffer) a={"F7" "<Key>F7"}}
+ {"Remove" checked=removemode,1 Mode(Remove) a={"F8" "<Key>F8"}}
+ {"Rotate" checked=rotatemode,1 Mode(Rotate) a={"F9" "<Key>F9"}}
+ {"Thermal" checked=thermalmode,1 Mode(Thermal) a={"F10" "<Key>F10"}}
+ {"Arrow" checked=arrowmode,1 Mode(Arrow) a={"F11" "<Key>F11"}}
+ {"Insert Point" checked=insertpointmode,1 Mode(InsertPoint) a={"Insert" "<Key>Insert"}}
+ {"Move" checked=movemode,1 Mode(Move)}
+ {"Copy" checked=copymode,1 Mode(Copy)}
+ {"Lock" checked=lockmode,1 Mode(Lock) a={"F12" "<Key>F12"}}
+ {"Cancel" Mode(Cancel) a={"Esc" "<Key>Escape"}}
+ -
+ {"Command" Command() a={":" "<Key>:"}}
+ }
+ {Settings
+ {"Layer groups" foreground=grey50 sensitive=false}
+ {"Edit layer groupings" EditLayerGroups()}
+ -
+ {"'All-direction' lines" checked=alldirection Display(Toggle45Degree) a={"." "<Key>."}}
+ {"Auto swap line start angle" checked=swapstartdir Display(ToggleStartDirection)}
+ {"Orthogonal moves" checked=orthomove Display(ToggleOrthoMove)}
+ {"Crosshair snaps to pins and pads" checked=snappin Display(ToggleSnapPin)}
+ {"Crosshair shows DRC clearance" checked=showdrc Display(ToggleShowDRC)}
+ {"Auto enforce DRC clearance" checked=autodrc Display(ToggleAutoDRC)}
+ -
+ {"Rubber band mode" checked=rubberband Display(ToggleRubberBandMode)}
+ {"Require unique element names" checked=uniquename Display(ToggleUniqueNames)}
+ {"Auto-zero delta measurements" checked=localref Display(ToggleLocalRef)}
+ {"New lines, arcs clear polygons" checked=clearnew Display(ToggleClearLine)}
+ {"New polygons are full ones" checked=newfullpoly Display(ToggleFullPoly)}
+ {"Show autorouter trials" checked=liveroute Display(ToggleLiveRoute)}
+ {"Thin draw" checked=thindraw Display(ToggleThindraw) a={"|" "<Key>|"}}
+ {"Thin draw poly" checked=thindrawpoly Display(ToggleThindrawPoly) a={"Ctrl-Shift-P" "Ctrl Shift<Key>p"}}
+ {"Check polygons" checked=checkplanes Display(ToggleCheckPlanes)}
+ -
+ {"Pinout shows number" checked=shownumber Display(ToggleName)}
+ {"Pins/Via show Name/Number" Display(PinOrPadName) a={"D" "<Key>d"}}
+ {"Enable vendor drill mapping" ToggleVendor() checked=VendorMapOn}
+ {"Import Settings"
+ {"New elements added at..." foreground=grey50 sensitive=false}
+ {" Center" Import(setnewpoint,center)}
+ {" Mark" Import(setnewpoint,mark)}
+ {" Crosshair" Import(setnewpoint)}
+ -
+ {"Set Dispersion" Import(setdisperse)}
+ }
+ }
+
+ {Select
+ {"Select all visible objects" Select(All)}
+ {"Select all connected objects" Select(Connection)}
+ -
+ {"Unselect all objects" Unselect(All)}
+ {"unselect all connected objects" Unselect(Connection)}
+ -
+ {"Select by name" foreground=grey50 sensitive=false}
+ {"All objects" Select(ObjectByName) active=have_regex}
+ {"Elements" Select(ElementByName) active=have_regex}
+ {"Pads" Select(PadByName) active=have_regex}
+ {"Pins" Select(PinByName) active=have_regex}
+ {"Text Objects" Select(TextByName) active=have_regex}
+ {"Vias" Select(ViaByName) active=have_regex}
+ -
+ {"Auto-place selected elements" AutoPlaceSelected() a={"Ctrl-P" "Ctrl<Key>p"}}
+ {"Disperse all elements" DisperseElements(All)}
+ {"Move selected elements to other side" Flip(SelectedElements) a={"Shift-B" "Shift<Key>b"}}
+ {"Move selected to current layer" MoveToCurrentLayer(Selected) a={"Shift-M" "Shift<Key>m"}}
+ {"Delete selected objects" Delete(Selected) a={"Delete" "<Key>Delete"}}
+ {"Convert selection to element" Select(Convert)}
+ -
+ {"Optimize selected rats" DeleteRats(SelectedRats) AddRats(SelectedRats)}
+ {"Auto-route selected rats" AutoRoute(SelectedRats) a={"Alt-R" "Alt<Key>r"}}
+ {"Rip up selected auto-routed tracks" RipUp(Selected)}
+ -
+ {"Change size of selected objects" foreground=grey50 sensitive=false}
+ {"Lines -10 mil" ChangeSize(SelectedLines,-10,mil) ChangeSize(SelectedArcs,-10,mil)}
+ {"Lines +10 mil" ChangeSize(SelectedLines,+10,mil) ChangeSize(SelectedArcs,+10,mil)}
+ {"Pads -10 mil" ChangeSize(SelectedPads,-10,mil)}
+ {"Pads +10 mil" ChangeSize(SelectedPads,+10,mil)}
+ {"Pins -10 mil" ChangeSize(SelectedPins,-10,mil)}
+ {"Pins +10 mil" ChangeSize(SelectedPins,+10,mil)}
+ {"Texts -10 mil" ChangeSize(SelectedTexts,-10,mil)}
+ {"Texts +10 mil" ChangeSize(SelectedTexts,+10,mil)}
+ {"Vias -10 mil" ChangeSize(SelectedVias,-10,mil)}
+ {"Vias +10 mil" ChangeSize(SelectedVias,+10,mil)}
+ -
+ {"Change drilling hole of selected objects" foreground=grey50 sensitive=false}
+ {"Vias -10 mil" ChangeDrillSize(SelectedVias,-10,mil)}
+ {"Vias +10 mil" ChangeDrillSize(SelectedVias,+10,mil)}
+ {"Pins -10 mil" ChangeDrillSize(SelectedPins,-10,mil)}
+ {"Pins +10 mil" ChangeDrillSize(SelectedPins,+10,mil)}
+ -
+ {"Change square-flag of selected objects" foreground=grey50 sensitive=false}
+ {"Elements" ChangeSquare(SelectedElements)}
+ {"Pins" ChangeSquare(SelectedPins)}
+ }
+
+ {Buffer
+ {"Copy selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) Mode(PasteBuffer)}
+ {"Cut selection to buffer" GetXY(Click to set the snap point for this buffer)
+ PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)}
+ {"Paste buffer to layout" Mode(PasteBuffer)}
+ -
+ {"Rotate buffer 90 deg CCW" Mode(PasteBuffer) PasteBuffer(Rotate,1)
+ a={"Shift-F7" "Shift<Key>F7"}}
+ {"Rotate buffer 90 deg CW" Mode(PasteBuffer) PasteBuffer(Rotate,3)}
+ {"Arbitrarily Rotate Buffer" Mode(PasteBuffer) FreeRotateBuffer()}
+ {"Mirror buffer (up/down)" Mode(PasteBuffer) PasteBuffer(Mirror)}
+ {"Mirror buffer (left/right)" Mode(PasteBuffer) PasteBuffer(Rotate,1)
+ PasteBuffer(Mirror) PasteBuffer(Rotate,3)}
+ -
+ {"Clear buffer" PasteBuffer(Clear)}
+ {"Convert buffer to element" PasteBuffer(Convert)}
+ {"Break buffer elements to pieces" PasteBuffer(Restore)}
+ {"Save buffer elements to file" Save(PasteBuffer)}
+ -
+ {"Select current buffer" foreground=grey50 sensitive=false}
+ {"#1" checked=buffer,1 PasteBuffer(1) a={"Shift-1" "Shift<Key>1"}}
+ {"#2" checked=buffer,2 PasteBuffer(2) a={"Shift-2" "Shift<Key>2"}}
+ {"#3" checked=buffer,3 PasteBuffer(3) a={"Shift-3" "Shift<Key>3"}}
+ {"#4" checked=buffer,4 PasteBuffer(4) a={"Shift-4" "Shift<Key>4"}}
+ {"#5" checked=buffer,5 PasteBuffer(5) a={"Shift-5" "Shift<Key>5"}}
+ }
+
+ {Connects
+ {"Lookup connection to object" GetXY(Click on the object) Connection(Find) a={"Ctrl-F" "Ctrl<Key>f"}}
+ {"Reset scanned pads/pins/vias" Connection(ResetPinsViasAndPads) Display(Redraw)}
+ {"Reset scanned lines/polygons" Connection(ResetLinesAndPolygons) Display(Redraw)}
+ {"Reset all connections" Connection(Reset) Display(Redraw) a={"Shift-F" "Shift<Key>f"}}
+ -
+ {"Optimize rats-nest" Atomic(Save) DeleteRats(AllRats)
+ Atomic(Restore) AddRats(AllRats) Atomic(Block) a={"O" "<Key>o"}}
+ {"Erase rats-nest" DeleteRats(AllRats) a={"E" "<Key>e"}}
+ {"Erase selected rats" DeleteRats(SelectedRats) a={"Shift-E" "Shift<Key>e"}}
+ -
+ {"Auto-route selected rats" AutoRoute(Selected)}
+ {"Auto-route all rats" AutoRoute(AllRats)}
+ {"Rip up all auto-routed tracks" RipUp(All)}
+ -
+ {"Auto-Optimize" djopt(auto) a={"Shift-=" "Shift<Key>="}}
+ {"Debumpify" djopt(debumpify) }
+ {"Unjaggy" djopt(unjaggy) }
+ {"Vianudge" djopt(vianudge) }
+ {"Viatrim" djopt(viatrim) }
+ {"Orthopull" djopt(orthopull) }
+ {"SimpleOpts" djopt(simple) a={"=" "<Key>="}}
+ {"Miter" djopt(miter) }
+ {"Puller" a={"Y" "<Key>y"} Puller() }
+ {"Global Puller"
+ {"Selected" GlobalPuller(selected) }
+ {"Found" GlobalPuller(found) }
+ {"All" GlobalPuller() }
+ }
+ {"Only autorouted nets" OptAutoOnly() checked=optautoonly}
+ -
+ {"Design Rule Checker" DRC()}
+ -
+ {"Apply vendor drill mapping" ApplyVendor()}
+ }
+
+ {Info
+ {"Generate object report" ReportObject() a={"Ctrl-R" "Ctrl<Key>r"}}
+ {"Generate drill summary" Report(DrillReport)}
+ {"Report found pins/pads" Report(FoundPins)}
+ {"Report net length" Report(NetLength) a={"R" "<Key>r"}}
+ {"Key Bindings"
+ {"Remove" a={"Backspace" "<Key>BackSpace"}
+ Delete(Selected)
+ }
+ {"Remove Connected" a={"Shift-Backspace" "Shift<Key>BackSpace"}
+ Atomic(Save)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Restore)
+ Connection(Find)
+ Atomic(Restore)
+ Select(Connection)
+ Atomic(Restore)
+ RemoveSelected()
+ Atomic(Restore)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Block)
+ }
+ {"Remove Connected" a={"Shift-Delete" "Shift<Key>Delete"}
+ Atomic(Save)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Restore)
+ Connection(Find)
+ Atomic(Restore)
+ Select(Connection)
+ Atomic(Restore)
+ RemoveSelected()
+ Atomic(Restore)
+ Connection(Reset)
+ Atomic(Restore)
+ Unselect(All)
+ Atomic(Block)
+ }
+ {"Set Same" a={"A" "<Key>a"} SetSame()}
+ {"Flip Object" a={"B" "<Key>b"} Flip(Object)}
+ {"Find Connections" a={"F" "<Key>f"} Connection(Reset) Connection(Find)}
+ {"ToggleHideName Object" a={"H" "<Key>h"} ToggleHideName(Object)}
+ {"ToggleHideName SelectedElement" a={"Shift-H" "Shift<Key>h"} ToggleHideName(SelectedElements)}
+ {"ChangeHole Object" a={"Ctrl-H" "Ctrl<Key>h"} ChangeHole(Object)}
+ {"ChangeJoin Object" a={"J" "<Key>j"} ChangeJoin(Object)}
+ {"ChangeJoin SelectedObject" a={"Shift-J" "Shift<Key>j"} ChangeJoin(SelectedObjects)}
+ {"Clear Object +2 mil" a={"K" "<Key>k"} ChangeClearSize(Object,+2,mil)}
+ {"Clear Object -2 mil" a={"Shift-K" "Shift<Key>k"} ChangeClearSize(Object,-2,mil)}
+ {"Clear Selected +2 mil" a={"Ctrl-K" "Ctrl<Key>k"} ChangeClearSize(SelectedObjects,+2,mil)}
+ {"Clear Selected -2 mil" a={"Shift-Ctrl-K" "Shift Ctrl<Key>k"} ChangeClearSize(SelectedObjects,-2,mil)}
+ {"Line Tool size +5 mil" a={"L" "<Key>l"} SetValue(LineSize,+5,mil)}
+ {"Line Tool size -5 mil" a={"Shift-L" "Shift<Key>l"} SetValue(LineSize,-5,mil)}
+ {"Move Object to current layer" a={"M" "<Key>m"} MoveToCurrentLayer(Object)}
+ {"MarkCrosshair" a={"Ctrl-M" "Ctrl<Key>m"} MarkCrosshair()}
+ {"Select shortest rat" a={"Shift-N" "Shift<Key>n"} AddRats(Close)}
+ {"AddRats to selected pins" a={"Shift-O" "Shift<Key>o"}
+ Atomic(Save)
+ DeleteRats(AllRats)
+ Atomic(Restore)
+ AddRats(SelectedRats)
+ Atomic(Block) }
+ {"ChangeOctagon Object" a={"Ctrl-O" "Ctrl<Key>o"} ChangeOctagon(Object)}
+ {"Polygon PreviousPoint" a={"P" "<Key>p"} Polygon(PreviousPoint)}
+ {"Polygon Close" a={"Shift-P" "Shift<Key>p"} Polygon(Close)}
+ {"ChangeSquare Object" a={"Q" "<Key>q"} ChangeSquare(Object)}
+ {"ChangeSize +5 mil" a={"S" "<Key>s"} ChangeSize(Object,+5,mil)}
+ {"ChangeSize -5 mil" a={"Shift-S" "Shift<Key>s"} ChangeSize(Object,-5,mil)}
+ {"ChangeDrill +5 mil" a={"Alt-S" "Alt<Key>s"} ChangeDrillSize(Object,+5,mil)}
+ {"ChangeDrill -5 mil" a={"Alt-Shift-S" "Alt Shift<Key>s"} ChangeDrillSize(Object,-5,mil)}
+ {"Text Tool scale +10 mil" a={"T" "<Key>t"} SetValue(TextScale,+10,mil)}
+ {"Text Tool scale -10 mil" a={"Shift-T" "Shift<Key>t"} SetValue(TextScale,-10,mil)}
+ {"Via Tool size +5 mil" a={"Shift-V" "Shift<Key>v"} SetValue(ViaSize,+5,mil)}
+ {"Via Tool size -5 mil" a={"Shift-Ctrl-V" "Shift Ctrl<Key>v"} SetValue(ViaSize,-5,mil)}
+ {"Via Tool drill +5 mil" a={"Alt-V" "Alt<Key>v"} SetValue(ViaDrillingHole,+5,mil)}
+ {"Via Tool drill -5 mil" a={"Alt-Shift-V" "Alt Shift<Key>v"} SetValue(ViaDrillingHole,-5,mil)}
+ {"AddRats Selected" a={"Shift-W" "Shift<Key>w"} AddRats(SelectedRats)}
+ {"Add All Rats" a={"W" "<Key>w"} AddRats(AllRats)}
+ {"Undo" a={"Alt-Z" "Alt<Key>z"} Undo()}
+ {"Cycle Clip" a={"/" "<Key>/"} Display(CycleClip)}
+ {"Arrow" a={"Space" "<Key>space"} Mode(Arrow) checked=arrowmode,1}
+ {"Temp Arrow ON" a={"[" "<Key>["} Mode(Save) Mode(Arrow) Mode(Notify)}
+ {"Temp Arrow OFF" a={"]" "<Key>]"} Mode(Release) Mode(Restore)}
+
+ {"Step Up" a={"Up" "<Key>Up"} Cursor(Warp,0,1,grid)}
+ {"Step Down" a={"Down" "<Key>Down"} Cursor(Warp,0,-1,grid)}
+ {"Step Left" a={"Left" "<Key>Left"} Cursor(Warp,-1,0,grid)}
+ {"Step Right" a={"Right" "<Key>Right"} Cursor(Warp,1,0,grid)}
+ {"Step +Up" a={"Up" "Shift<Key>Up"} Cursor(Pan,0,50,view)}
+ {"Step +Down" a={"Down" "Shift<Key>Down"} Cursor(Pan,0,-50,view)}
+ {"Step +Left" a={"Left" "Shift<Key>Left"} Cursor(Pan,-50,0,view)}
+ {"Step +Right" a={"Right" "Shift<Key>Right"} Cursor(Pan,50,0,view)}
+ {'"Click"' a={"Enter" "<Key>Enter"} Mode(Notify) Mode(Release) }
+ }
+ }
+ {Window
+ {"Board Layout" DoWindows(Layout)}
+ {"Library" DoWindows(Library)}
+ {"Message Log" DoWindows(Log)}
+ {"Netlist" DoWindows(Netlist)}
+ {"Pinout" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
+ }
+}
commit 73ee8734a76611b4356d52db0cd067e1013743a3
Author: Peter Clifton <pcjc2@xxxxxxxxx>
Commit: Peter Clifton <pcjc2@xxxxxxxxx>
pcb-menu.res: Fixup some more whitespace
diff --git a/src/pcb-menu.res b/src/pcb-menu.res
index bda9bd7..1e88e52 100644
--- a/src/pcb-menu.res
+++ b/src/pcb-menu.res
@@ -31,7 +31,7 @@ MainMenu =
{"About..." About()}
{"Save layout" Save(Layout) m=S a={"Ctrl-S" "Ctrl<Key>s"}}
{"Save layout as..." Save(LayoutAs) m=A a={"Shift Ctrl-S" "Shift Ctrl<Key>s"}}
- {"Revert" Load(Revert,none)}
+ {"Revert" Load(Revert,none)}
{"Import Schematics" Import() }
{"Load layout" Load(Layout)}
{"Load element data to paste-buffer" PasteBuffer(Clear) Load(ElementTobuffer)}
_______________________________________________
geda-cvs mailing list
geda-cvs@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-cvs