gEDA-user: PCB Updates at luciani.org

["John Luciani" <jluciani@xxxxxxxxx>]

I have made the following additions and changes to the footprint
library at luciani.org ---

Additions

* Added all Hirose DF9 Series 1mm pitch SMT Board to Board Connectors
 except the bottom entry header (DF9L-31P-1V).
* Added Molex 71308 Dual Row, SMT, Vertical Header, 100 mil pitch
  with retention pegs.
* Added Keystone AAA Battery Clips, part number 82. The footprint
 contains two clips spaced 1080 mils apart.
* Added Keystone AA Battery Clips, part number 92. The footprint
 contains two clips spaced 1300 mils apart.
* Added 3M 2mm x 2mm Pin Strip Headers 1512xx-8x2x-xx (straight)
* Added 3M 2mm x 2mm Pin Strip Headers 1512xx-7x2x-xx (right angle)
* Added 3M 2mm x 2mm Pin Strip Headers 1502xx-600x-xx (straight)
* Added TO263_170P_788L1_5N__National_TS5B_Package
* Added SC70-65P-210L1-6N__On-Semi_419B-02-Package and
 SC70-65P-210L1-5N__On-Semi_419A-02-Package. The On-Semi
 pad length specification is 0.5mm compared to 1mm for the LTC SC70.
* Added Powerstor FC Supercap CAPMP-1000P-1750W-4000L__Powerstor_FC-Series

Changes

* CON_USB_TYPEB__Keystone_924 --- changed the mounting holes to pins
in footprint.
* CON__CUI_PJ-002AH-SMT --- decreased the size of the alignment pin holes.
 The small pin is now 67mils, the large pin is now to 79mils.
* Corrected pads on the JST BxB-PH-K headers. The solder-side pads are
 changed from pins to pins with rounded pads which now matches the
component-side
 pins. The refdes is shifted 10mils from the body outline (it was apx 1-2mils).

(* jcl *)

--
http://www.luciani.org


_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user