[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
gEDA-user: Importing board outline from .emn file
Hi Folks,
Does anyone know if there is a way to import a board outline defined in
an emn file into PCB? The emn file is produced by ProEng 3-D CAD tool
and it seems quite simply structured. I have attached it below ...
.HEADER
BOARD_FILE 3.0 "Pro/ENGINEER TM Wildfire 3.0 (c" 2009/02/04.13:30:43
3
PCB-DB MM
.END_HEADER
.BOARD_OUTLINE MCAD
1.20000
0 0.00000 0.00000 0.00000
0 60.00000 0.00000 0.00000
0 60.00000 30.00000 0.00000
0 0.00000 30.00000 0.00000
0 0.00000 0.00000 0.00000
.END_BOARD_OUTLINE
.DRILLED_HOLES
3.50000 21.50000 16.00000 NPTH BOARD PIN
MCAD
.END_DRILLED_HOLES
.PLACE_KEEPOUT UNOWNED
TOP 0.00000
0 7.83200 30.00000 0.00000
0 7.83200 27.99400 0.00000
0 10.83200 27.99400 0.00000
0 10.83200 30.00000 0.00000
0 7.83200 30.00000 0.00000
.END_PLACE_KEEPOUT
.PLACE_KEEPOUT UNOWNED
TOP 0.00000
0 49.14500 30.00000 0.00000
0 49.14500 27.99400 0.00000
0 52.14500 27.99400 0.00000
0 52.14500 30.00000 0.00000
0 49.14500 30.00000 0.00000
.END_PLACE_KEEPOUT
.PLACE_KEEPOUT UNOWNED
TOP 0.00000
0 10.84300 0.00000 0.00000
0 7.84300 0.00000 0.00000
0 7.84300 2.00600 0.00000
0 10.84300 2.00600 0.00000
0 10.84300 0.00000 0.00000
.END_PLACE_KEEPOUT
.PLACE_KEEPOUT UNOWNED
TOP 0.00000
0 52.12000 0.00000 0.00000
0 49.12000 0.00000 0.00000
0 49.12000 2.00600 0.00000
0 52.12000 2.00600 0.00000
0 52.12000 0.00000 0.00000
.END_PLACE_KEEPOUT
.PLACE_KEEPOUT UNOWNED
TOP 0.00000
0 0.00000 18.87600 0.00000
0 0.00000 15.87600 0.00000
0 2.00600 15.87600 0.00000
0 2.00600 18.87600 0.00000
0 0.00000 18.87600 0.00000
.END_PLACE_KEEPOUT
.PLACE_KEEPOUT UNOWNED
TOP 0.00000
0 57.99400 18.88100 0.00000
0 60.00000 18.88100 0.00000
0 60.00000 15.88100 0.00000
0 57.99400 15.88100 0.00000
0 57.99400 18.88100 0.00000
.END_PLACE_KEEPOUT
_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user