[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: gEDA-user: Design Flow Roadmap starting point
> Couldn't resource file be used with the plugin mode of programming
> to extend function? Since it is LISP-ish it seems closest to a
> common file format language with gschem, which uses guile. Are
> there rumors of planning to stop using guile?
The resource file is purely data. Its primary benefits are that its
syntax is independent of its content, and the values are all strings.
Hence, you can put pretty much any data in it, and pcb can parse it.
Here's a copy of pcb-menu.res:
# -*- c -*-
# Note - pcb-menu.res is used to build pcb-menu.h
# Note - parameters are sensitive to extra spaces around the commas
Mouse =
{
Left = {
Mode(Notify)
up = Mode(Release)
}
Right = {
{ Mode(Save) Mode(Rotate) Mode(Notify) Mode(Release) Mode(Restore) }
}
Middle = {
Pan(1)
up = Pan(0)
ctrl = Pan(thumb,1)
ctrl-up = Pan(thumb,0)
}
Up = Zoom(0.8)
Down = Zoom(1.25)
# If you want zoom to center, do this instead.
#Up = { {Zoom(0.8) Center()} }
#Down = { {Zoom(1.25) Center()} }
}
MainMenu =
{
{File
{"About..." About()}
{"Save layout" Save(Layout)}
{"Save layout as..." Save(LayoutAs)}
{"Revert" Load(Revert,none)}
{"Load layout" Load(Layout)}
{"Load element data to paste-buffer" PasteBuffer(Clear) Load(ElementTobuffer)}
{"Load layout data to paste-buffer" PasteBuffer(Clear) Load(LayoutTobuffer)}
{"Load netlist file" Load(Netlist)}
{"Load vendor resource file" LoadVendor()}
{"Print layout..." Print()}
{"Export layout..." Export()}
{"Calibrate Printer..." PrintCalibrate()}
-
{"Save connection data of..." foreground=grey50 sensitive=false}
{" a single element" GetXY(press a button at the element location) Save(ElementConnections)}
{" all elements" Save(AllConnections)}
{" unused pins" Save(AllUnusedPins)}
-
{"Start new layout" New()}
-
{"Quit Program" Quit() m=Q a={"Ctrl-Q" "Ctrl<Key>q"}}
}
{View
{"Flip up/down" checked=flip_y SwapSides(V) a={"Tab" "<Key>Tab"}}
{"Flip left/right" checked=flip_x SwapSides(H) a={"Shift-Tab" "Shift<Key>Tab"}}
{"Spin 180°" SwapSides(R) a={"Ctrl-Tab" "Ctrl<Key>Tab"}}
{"Swap Sides" SwapSides() a={"Ctrl-Shift-Tab" "Ctrl Shift<Key>Tab"}}
{"Center cursor" Center() a={"C" "<Key>c"}}
{"Show soldermask" checked=showmask Display(ToggleMask)}
-
{"Displayed element-name..." foreground=grey50 sensitive=false}
{"Description" Display(Description) checked=elementname,1}
{"Reference Designator" Display(NameOnPCB) checked=elementname,2}
{"Value" Display(Value) checked=elementname,3}
{"Lock Names" checked=locknames Display(ToggleLockNames)}
{"Only Names" checked=onlynames Display(ToggleOnlyNames)}
-
{"Pinout shows number" checked=shownumber Display(ToggleName)}
{"Open pinout menu" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
-
{Zoom
{"Zoom In 2X" Zoom(-2)}
{"Zoom In 20%" Zoom(-1.2) m=Z a={"Z" "<Key>z"}}
{"Zoom Out 20%" Zoom(+1.2) m=O a={"Shift-Z" "Shift<Key>z"}}
# If you want zoom to center, do this instead.
#{"Zoom In 20%" Zoom(-1.2) Center() m=Z a={"Z" "<Key>z"}}
#{"Zoom Out 20%" Zoom(+1.2) Center() m=O a={"Shift-Z" "Shift<Key>z"}}
{"Zoom Out 2X" Zoom(+2)}
{"Zoom Max" Zoom() m=M a={"V" "<Key>v"}}
-
{"Zoom to 0.1mil/px" Zoom(=10)}
{"Zoom to 0.01mm/px" Zoom(=39.37)}
{"Zoom to 1mil/px" Zoom(=100)}
{"Zoom to 0.05mm/px" Zoom(=196.8504)}
{"Zoom to 2.5mil/px" Zoom(=250)}
{"Zoom to 0.1mm/px" Zoom(=393.7)}
{"Zoom to 10mil/px" Zoom(=1000)}
}
{Grid
{"mils" checked=grid_units_mm,0 SetUnits(mil)}
{"mms" checked=grid_units_mm,1 SetUnits(mm)}
{"Display grid" checked=drawgrid Display(Grid)}
{"Realign grid" GetXY(Press a button at a grid point) Display(ToggleGrid)}
{"No Grid" checked=gridsize,1 SetValue(Grid,1)}
-
{ "0.1 mil" checked=gridsize,10 SetUnits(mil) SetValue(Grid,10)}
{ "1 mil" checked=gridsize,100 SetUnits(mil) SetValue(Grid,100)}
{ "5 mil" checked=gridsize,500 SetUnits(mil) SetValue(Grid,500)}
{ "10 mil" checked=gridsize,1000 SetUnits(mil) SetValue(Grid,1000)}
{ "25 mil" checked=gridsize,2500 SetUnits(mil) SetValue(Grid,2500)}
{"100 mil" checked=gridsize,10000 SetUnits(mil) SetValue(Grid,10000)}
-
{"0.01 mm" checked=gridsize,39 SetUnits(mm) SetValue(Grid,39.37007874)}
{"0.05 mm" checked=gridsize,197 SetUnits(mm) SetValue(Grid,196.85039370)}
{"0.1 mm" checked=gridsize,394 SetUnits(mm) SetValue(Grid,393.70078740)}
{"0.25 mm" checked=gridsize,984 SetUnits(mm) SetValue(Grid,984.25197)}
{"0.5 mm" checked=gridsize,1969 SetUnits(mm) SetValue(Grid,1968.503937)}
{"1 mm" checked=gridsize,3937 SetUnits(mm) SetValue(Grid,3937.00787400)}
-
{"Grid -5mil" SetValue(Grid,-5,mil) a={"Shift-G" "Shift<Key>g"}}
{"Grid +5mil" SetValue(Grid,+5,mil) a={"G" "<Key>g"}}
{"Grid -0.05mm" SetValue(Grid,-0.05,mm) a={"Shift-Ctrl-G" "Shift Ctrl<Key>g"}}
{"Grid +0.05mm" SetValue(Grid,+0.05,mm) a={"Ctrl-G" "Ctrl<Key>g"}}
}
-
{"Shown Layers"
@layerview
-
{"Edit Layer Groups" EditLayerGroups()}
}
{"Current Layer"
@layerpick
-
{"Delete current layer" MoveLayer(c,-1)}
{"Add new layer" MoveLayer(-1,c)}
{"Move current layer up" MoveLayer(c,up)}
{"Move current layer down" MoveLayer(c,down)}
}
}
{Edit
{"Undo last operation" Undo() a={"U" "<Key>u"}}
{"Redo last undone operation" Redo() a={"Shift-R" "Shift<Key>r"}}
{"Clear undo-buffer" Undo(ClearList) a={"Shift-Ctrl-U" "Shift Ctrl<Key>u"}}
-
{"Cut selection to buffer" GetXY(Press a button at the reference location)
PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)
a={"Ctrl-C" "Ctrl<Key>c"}}
{"Copy selection to buffer" GetXY(Press a button at the reference location)
PasteBuffer(Clear) PasteBuffer(AddSelected) Mode(PasteBuffer)
a={"Ctrl-X" "Ctrl<Key>x"}}
{"Paste buffer to layout" Mode(PasteBuffer) a={"F7" "<Key>F7"}}
-
{"Unselect all" Unselect(All) a={"Shift-Alt-A" "Shift Alt<Key>a"}}
{"Select all" Select(All) a={"Alt-A" "Alt<Key>a"}}
-
{"Move to current layer" MoveToCurrentLayer(Object) a={"M" "<Key>m"}}
{"Move selected to current layer" MoveToCurrentLayer(Selected) a={"Shift-M" "Shift<Key>m"}}
-
{"Edit Names..." foreground=grey50 sensitive=false}
{" Change text on layout" ChangeName(Object) a={"N" "<Key>n"}}
{" Edit name of layout" ChangeName(Layout)}
{" Edit name of active layer" ChangeName(Layer)}
-
{"Board Sizes" AdjustSizes()}
{"Route Styles"
@routestyles
-
{"Edit..." AdjustStyle(0)}
}
}
{Tools
{"None" checked=nomode,1 Mode(None)}
{"Via" checked=viamode,1 Mode(Via) a={"F1" "<Key>F1"}}
{"Line" checked=linemode,1 Mode(Line) a={"F2" "<Key>F2"}}
{"Arc" checked=arcmode,1 Mode(Arc) a={"F3" "<Key>F3"}}
{"Text" checked=textmode,1 Mode(Text) a={"F4" "<Key>F4"}}
{"Rectangle" checked=rectanglemode,1 Mode(Rectangle) a={"F5" "<Key>F5"}}
{"Polygon" checked=polygonmode,1 Mode(Polygon) a={"F6" "<Key>F6"}}
{"Buffer" checked=pastebuffermode,1 Mode(PasteBuffer) a={"F7" "<Key>F7"}}
{"Remove" checked=removemode,1 Mode(Remove) a={"F8" "<Key>F8"}}
{"Rotate" checked=rotatemode,1 Mode(Rotate) a={"F9" "<Key>F9"}}
{"Thermal" checked=thermalmode,1 Mode(Thermal) a={"F10" "<Key>F10"}}
{"Arrow" checked=arrowmode,1 Mode(Arrow) a={"F11" "<Key>F11"}}
{"Insert Point" checked=insertpointmode,1 Mode(InsertPoint) a={"Insert" "<Key>Insert"}}
{"Move" checked=movemode,1 Mode(Move)}
{"Copy" checked=copymode,1 Mode(Copy)}
{"Lock" checked=lockmode,1 Mode(Lock)}
{"Cancel" Mode(Cancel) a={"Esc" "<Key>Escape"}}
-
{"Command" Command() a={":" "<Key>:"}}
}
{Settings
{"Layer groups" foreground=grey50 sensitive=false}
{"Edit layer groupings" EditLayerGroups()}
-
{"'All-direction' lines" checked=alldirection Display(Toggle45Degree) a={"." "<Key>."}}
{"Auto swap line start angle" checked=swapstartdir Display(ToggleStartDirection)}
{"Orthogonal moves" checked=orthomove Display(ToggleOrthoMove)}
{"Crosshair snaps to pins and pads" checked=snappin Display(ToggleSnapPin)}
{"Crosshair shows DRC clearance" checked=showdrc Display(ToggleShowDRC)}
{"Auto enforce DRC clearance" checked=autodrc Display(ToggleAutoDRC)}
-
{"Rubber band mode" checked=rubberband Display(ToggleRubberBandMode)}
{"Require unique element names" checked=uniquename Display(ToggleUniqueNames)}
{"Auto-zero delta measurements" checked=localref Display(ToggleLocalRef)}
{"New lines, arcs clear polygons" checked=clearnew Display(ToggleClearLine)}
{"Show autorouter trials" checked=liveroute Display(ToggleLiveRoute)}
{"Thin draw" checked=thindraw Display(ToggleThindraw) a={"|" "<Key>|"}}
{"Thin draw poly" checked=thindrawpoly Display(ToggleThindrawPoly) a={"Ctrl-Shift-P" "Ctrl Shift<Key>p"}}
{"Check polygons" checked=checkplanes Display(ToggleCheckPlanes)}
-
{"Pinout shows number" checked=shownumber Display(ToggleName)}
{"Pins/Via show Name/Number" Display(PinOrPadName) a={"D" "<Key>d"}}
{"Enable vendor drill mapping" ToggleVendor() checked=VendorMapOn}
}
{Select
{"Select all objects" Select(All)}
{"Select all connected objects" Select(Connection)}
-
{"Unselect all objects" Unselect(All)}
{"unselect all connected objects" Unselect(Connection)}
-
{"Select by name" foreground=grey50 sensitive=false}
{"All objects" Select(ObjectByName) ActiveWhen(have_regex)}
{"Elements" Select(ElementByName) ActiveWhen(have_regex)}
{"Pads" Select(PadByName) ActiveWhen(have_regex)}
{"Pins" Select(PinByName) ActiveWhen(have_regex)}
{"Text Objects" Select(TextByName) ActiveWhen(have_regex)}
{"Vias" Select(ViaByName) ActiveWhen(have_regex)}
-
{"Auto-place selected elements" AutoPlaceSelected() a={"Ctrl-P" "Ctrl<Key>p"}}
{"Disperse all elements" DisperseElements(All)}
{"Move selected elements to other side" Flip(SelectedElements) a={"Shift-B" "Shift<Key>b"}}
{"Delete selected objects" RemoveSelected()}
{"Convert selection to element" Select(Convert)}
-
{"Optimize selected rats" DeleteRats(SelectedRats) AddRats(SelectedRats)}
{"Auto-route selected rats" AutoRoute(SelectedRats) a={"Alt-R" "Alt<Key>r"}}
{"Rip-up selected auto-routed tracks" RipUp(Selected)}
-
{"Change size of selected objects" foreground=grey50 sensitive=false}
{"Lines -10 mil" ChangeSize(SelectedLines,-10,mil) ChangeSize(SelectedArcs,-10,mil)}
{"Lines +10 mil" ChangeSize(SelectedLines,+10,mil) ChangeSize(SelectedArcs,+10,mil)}
{"Pads -10 mil" ChangeSize(SelectedPads,-10,mil)}
{"Pads +10 mil" ChangeSize(SelectedPads,+10,mil)}
{"Pins -10 mil" ChangeSize(SelectedPins,-10,mil)}
{"Pins +10 mil" ChangeSize(SelectedPins,+10,mil)}
{"Texts -10 mil" ChangeSize(SelectedTexts,-10,mil)}
{"Texts +10 mil" ChangeSize(SelectedTexts,+10,mil)}
{"Vias -10 mil" ChangeSize(SelectedVias,-10,mil)}
{"Vias +10 mil" ChangeSize(SelectedVias,+10,mil)}
-
{"Change drilling hole of selected objects" foreground=grey50 sensitive=false}
{"Vias -10 mil" ChangeDrillSize(SelectedVias,-10,mil)}
{"Vias +10 mil" ChangeDrillSize(SelectedVias,+10,mil)}
{"Pins -10 mil" ChangeDrillSize(SelectedPins,-10,mil)}
{"Pins +10 mil" ChangeDrillSize(SelectedPins,+10,mil)}
-
{"Change square-flag of selected objects" foreground=grey50 sensitive=false}
{"Elements" ChangeSquare(SelectedElements)}
{"Pins" ChangeSquare(SelectedPins)}
}
{Buffer
{"Copy selection to buffer" GetXY(Press a button at the element location)
PasteBuffer(Clear) PasteBuffer(AddSelected) Mode(PasteBuffer)}
{"Cut selection to buffer" GetXY(Press a button at the element location)
PasteBuffer(Clear) PasteBuffer(AddSelected) RemoveSelected() Mode(PasteBuffer)}
{"Paste buffer to layout" Mode(PasteBuffer)}
-
{"Rotate buffer 90 deg CCW" Mode(PasteBuffer) PasteBuffer(Rotate,1)
a={"Shift-F7" "Shift<Key>F7"}}
{"Rotate buffer 90 deg CW" Mode(PasteBuffer) PasteBuffer(Rotate,3)}
{"Mirror buffer (up/down)" Mode(PasteBuffer) PasteBuffer(Mirror)}
{"Mirror buffer (left/right)" Mode(PasteBuffer) PasteBuffer(Rotate,1)
PasteBuffer(Mirror) PasteBuffer(Rotate,3)}
-
{"Clear buffer" PasteBuffer(Clear)}
{"Convert buffer to element" PasteBuffer(Convert)}
{"Break buffer elements to pieces" PasteBuffer(Restore)}
{"Save buffer elements to file" Save(PasteBuffer)}
-
{"Select current buffer" foreground=grey50 sensitive=false}
{"#1" CheckWhen(buffer,1) PasteBuffer(1) a={"Shift-1" "Shift<Key>1"}}
{"#2" CheckWhen(buffer,2) PasteBuffer(2) a={"Shift-2" "Shift<Key>2"}}
{"#3" CheckWhen(buffer,3) PasteBuffer(3) a={"Shift-3" "Shift<Key>3"}}
{"#4" CheckWhen(buffer,4) PasteBuffer(4) a={"Shift-4" "Shift<Key>4"}}
{"#5" CheckWhen(buffer,5) PasteBuffer(5) a={"Shift-5" "Shift<Key>5"}}
}
{Connects
{"Lookup connection to object" GetXY(Select the object) Connection(Find) a={"Ctrl-F" "Ctrl<Key>f"}}
{"Reset scanned pads/pins/vias" Connection(ResetPinsViasAndPads) Display(Redraw)}
{"Reset scanned lines/polygons" Connection(ResetLinesAndPolygons) Display(Redraw)}
{"Reset all connections" Connection(Reset) Display(Redraw) a={"Shift-F" "Shift<Key>f"}}
-
{"Optimize rats-nest" Atomic(Save) DeleteRats(AllRats)
Atomic(Restore) AddRats(AllRats) Atomic(Block) a={"O" "<Key>o"}}
{"Erase rats-nest" DeleteRats(AllRats) a={"E" "<Key>e"}}
{"Erase selected rats" DeleteRats(SelectedRats) a={"Shift-E" "Shift<Key>e"}}
-
{"Auto-route selected rats" AutoRoute(Selected)}
{"Auto-route all rats" AutoRoute(AllRats)}
{"Rip up all auto-routed tracks" RipUp(All)}
-
{"Auto-Optimize" djopt(auto) a={"Shift-=" "Shift<Key>="}}
{"Debumpify" djopt(debumpify) }
{"Unjaggy" djopt(unjaggy) }
{"Vianudge" djopt(vianudge) }
{"Viatrim" djopt(viatrim) }
{"Orthopull" djopt(orthopull) }
{"SimpleOpts" djopt(simple) a={"=" "<Key>="}}
{"Miter" djopt(miter) }
{"Puller" a={"Y" "<Key>y"} Puller() }
{"Only autorouted nets" OptAutoOnly() checked=optautoonly}
-
{"Design Rule Checker" DRC()}
-
{"Apply vendor drill mapping" ApplyVendor()}
}
{Info
{"Generate object report" ReportObject() a={"Ctrl-R" "Ctrl<Key>r"}}
{"Generate drill summary" Report(DrillReport)}
{"Report found pins/pads" Report(FoundPins)}
{"Report net length" Report(NetLength) a={"R" "<Key>r"}}
{"Key Bindings"
{"Remove" a={"Backspace" "<Key>BackSpace"}
Mode(Save)
Mode(Remove)
Mode(Notify)
Mode(Restore)
}
{"Remove" a={"Delete" "<Key>Delete"}
Mode(Save)
Mode(Remove)
Mode(Notify)
Mode(Restore)
}
{"Remove Connected" a={"Shift-Backspace" "Shift<Key>BackSpace"}
Atomic(Save)
Connection(Reset)
Atomic(Restore)
Unselect(All)
Atomic(Restore)
Connection(Find)
Atomic(Restore)
Select(Connection)
Atomic(Restore)
RemoveSelected()
Atomic(Restore)
Connection(Reset)
Atomic(Restore)
Unselect(All)
Atomic(Block)
}
{"Remove Connected" a={"Shift-Delete" "Shift<Key>Delete"}
Atomic(Save)
Connection(Reset)
Atomic(Restore)
Unselect(All)
Atomic(Restore)
Connection(Find)
Atomic(Restore)
Select(Connection)
Atomic(Restore)
RemoveSelected()
Atomic(Restore)
Connection(Reset)
Atomic(Restore)
Unselect(All)
Atomic(Block)
}
{"Set Same" a={"A" "<Key>a"} SetSame()}
{"Flip Object" a={"B" "<Key>b"} Flip(Object)}
{"Find Connections" a={"F" "<Key>f"} Connection(Reset) Connection(Find)}
{"ToggleHideName Object" a={"H" "<Key>h"} ToggleHideName(Object)}
{"ToggleHideName SelectedElement" a={"Shift-H" "Shift<Key>h"} ToggleHideName(SelectedElements)}
{"ChangeHole Object" a={"Ctrl-H" "Ctrl<Key>h"} ChangeHole(Object)}
{"ChangeJoin Object" a={"J" "<Key>j"} ChangeJoin(Object)}
{"ChangeJoin SelectedObject" a={"Shift-J" "Shift<Key>j"} ChangeJoin(SelectedObjects)}
{"Clear Object +2 mil" a={"K" "<Key>k"} ChangeClearSize(Object,+2,mil)}
{"Clear Object -2 mil" a={"Shift-K" "Shift<Key>k"} ChangeClearSize(Object,-2,mil)}
{"Clear Selected +2 mil" a={"Ctrl-K" "Ctrl<Key>k"} ChangeClearSize(SelectedObjects,+2,mil)}
{"Clear Selected -2 mil" a={"Shift-Ctrl-K" "Shift Ctrl<Key>k"} ChangeClearSize(SelectedObjects,-2,mil)}
{"Linesize +5 mil" a={"L" "<Key>l"} SetValue(LineSize,+5,mil)}
{"Linesize -5 mil" a={"Shift-L" "Shift<Key>l"} SetValue(LineSize,-5,mil)}
{"MarkCrosshair" a={"Ctrl-M" "Ctrl<Key>m"} MarkCrosshair()}
{"Select shortest rat" a={"Shift-N" "Shift<Key>n"} AddRats(Close)}
{"AddRats to selected pins" a={"Shift-O" "Shift<Key>o"}
Atomic(Save)
DeleteRats(AllRats)
Atomic(Restore)
AddRats(SelectedRats)
Atomic(Block) }
{"ChangeOctagon Object" a={"Ctrl-O" "Ctrl<Key>o"} ChangeOctagon(Object)}
{"Polygon PreviousPoint" a={"P" "<Key>p"} Polygon(PreviousPoint)}
{"Polygon Close" a={"Shift-P" "Shift<Key>p"} Polygon(Close)}
{"ChangeSquare Object" a={"Q" "<Key>q"} ChangeSquare(Object)}
{"ChangeSize +5 mil" a={"S" "<Key>s"} ChangeSize(Object,+5,mil)}
{"ChangeSize -5 mil" a={"Shift-S" "Shift<Key>s"} ChangeSize(Object,-5,mil)}
{"ChangeDrill +5 mil" a={"Alt-S" "Alt<Key>s"} ChangeDrillSize(Object,+5,mil)}
{"ChangeDrill -5 mil" a={"Alt-Shift-S" "Alt Shift<Key>s"} ChangeDrillSize(Object,-5,mil)}
{"TextScale +10 mil" a={"T" "<Key>t"} SetValue(TextScale,+10,mil)}
{"TextScale -10 mil" a={"Shift-T" "Shift<Key>t"} SetValue(TextScale,-10,mil)}
{"ViaSize +5 mil" a={"Ctrl-V" "Ctrl<Key>v"} SetValue(ViaSize,+5,mil)}
{"ViaSize -5 mil" a={"Shift-Ctrl-V" "Shift Ctrl<Key>v"} SetValue(ViaSize,-5,mil)}
{"ViaDrill +5 mil" a={"Alt-V" "Alt<Key>v"} SetValue(ViaDrillingHole,+5,mil)}
{"ViaDrill -5 mil" a={"Alt-Shift-V" "Alt Shift<Key>v"} SetValue(ViaDrillingHole,-5,mil)}
{"AddRats Selected" a={"Shift-W" "Shift<Key>w"} AddRats(SelectedRats)}
{"Add All Rats" a={"W" "<Key>w"} AddRats(AllRats)}
{"Undo" a={"Alt-Z" "Alt<Key>z"} Undo()}
{"Cycle Clip" a={"/" "<Key>/"} Display(CycleClip)}
{"Arrow" a={"Space" "<Key>space"} Mode(Arrow) checked=arrowmode,1}
{"Temp Arrow ON" a={"[" "<Key>["} Mode(Save) Mode(Arrow) Mode(Notify)}
{"Temp Arrow OFF" a={"]" "<Key>]"} Mode(Release) Mode(Restore)}
{"Step Up" a={"Up" "<Key>Up"} Cursor(Warp,0,1,grid)}
{"Step Down" a={"Down" "<Key>Down"} Cursor(Warp,0,-1,grid)}
{"Step Left" a={"Left" "<Key>Left"} Cursor(Warp,-1,0,grid)}
{"Step Right" a={"Right" "<Key>Right"} Cursor(Warp,1,0,grid)}
{"Step +Up" a={"Up" "Shift<Key>Up"} Cursor(Pan,0,50,view)}
{"Step +Down" a={"Down" "Shift<Key>Down"} Cursor(Pan,0,-50,view)}
{"Step +Left" a={"Left" "Shift<Key>Left"} Cursor(Pan,-50,0,view)}
{"Step +Right" a={"Right" "Shift<Key>Right"} Cursor(Pan,50,0,view)}
{'"Click"' a={"Enter" "<Key>Enter"} Mode(Notify) Mode(Release) }
}
}
{Window
{"Board Layout" DoWindows(Layout)}
{"Library" DoWindows(Library)}
{"Message Log" DoWindows(Log)}
{"Netlist" DoWindows(Netlist)}
{"Pinout" Display(Pinout) a={"Shift-D" "Shift<Key>d"}}
}
}
_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user