[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[tor-commits] [sbws/maint-1.1] fix: docs: Remove unneeded linter exception
commit 3edf2fe2a739af4a2ccc8f128e45245347bce265
Author: juga0 <juga@xxxxxxxxxx>
Date: Tue May 19 15:22:13 2020 +0000
fix: docs: Remove unneeded linter exception
---
docs/source/index.rst | 1 +
docs/source/torflow_aggr.rst | 30 ++++-----
sbws/lib/v3bwfile.py | 147 +------------------------------------------
3 files changed, 17 insertions(+), 161 deletions(-)
diff --git a/docs/source/index.rst b/docs/source/index.rst
index 342e857..58c3911 100644
--- a/docs/source/index.rst
+++ b/docs/source/index.rst
@@ -45,6 +45,7 @@ Included in the
config
config_tor
sbws
+ torflow_aggr
implementation
bandwidth_distribution
tor_bandwidth_files
diff --git a/docs/source/torflow_aggr.rst b/docs/source/torflow_aggr.rst
index 6fc8fd1..49441b4 100644
--- a/docs/source/torflow_aggr.rst
+++ b/docs/source/torflow_aggr.rst
@@ -5,28 +5,28 @@ Torflow measurements aggregation
From Torflow's README.spec.txt (section 2.2)::
- In this way, the resulting network status consensus bandwidth values # NOQA
- are effectively re-weighted proportional to how much faster the node # NOQA
+ In this way, the resulting network status consensus bandwidth values
+ are effectively re-weighted proportional to how much faster the node
was as compared to the rest of the network.
The variables and steps used in Torflow:
**strm_bw**::
- The strm_bw field is the average (mean) of all the streams for the relay # NOQA
+ The strm_bw field is the average (mean) of all the streams for the relay
identified by the fingerprint field.
strm_bw = sum(bw stream x)/|n stream|
**filt_bw**::
- The filt_bw field is computed similarly, but only the streams equal to # NOQA
- or greater than the strm_bw are counted in order to filter very slow # NOQA
+ The filt_bw field is computed similarly, but only the streams equal to
+ or greater than the strm_bw are counted in order to filter very slow
streams due to slow node pairings.
**filt_sbw and strm_sbw**::
for rs in RouterStats.query.filter(stats_clause).\
- options(eagerload_all('router.streams.circuit.routers')).all(): # NOQA
+ options(eagerload_all('router.streams.circuit.routers')).all():
tot_sbw = 0
sbw_cnt = 0
for s in rs.router.streams:
@@ -48,13 +48,13 @@ The variables and steps used in Torflow:
**filt_avg, and strm_avg**::
- Once we have determined the most recent measurements for each node, we # NOQA
- compute an average of the filt_bw fields over all nodes we have measured. # NOQA
+ Once we have determined the most recent measurements for each node, we
+ compute an average of the filt_bw fields over all nodes we have measured.
::
- filt_avg = sum(map(lambda n: n.filt_bw, nodes.itervalues()))/float(len(nodes)) # NOQA
- strm_avg = sum(map(lambda n: n.strm_bw, nodes.itervalues()))/float(len(nodes)) # NOQA
+ filt_avg = sum(map(lambda n: n.filt_bw, nodes.itervalues()))/float(len(nodes))
+ strm_avg = sum(map(lambda n: n.strm_bw, nodes.itervalues()))/float(len(nodes))
**true_filt_avg and true_strm_avg**::
@@ -72,7 +72,7 @@ In the non-pid case, all types of nodes get the same avg
**n.ratio**::
- These averages are used to produce ratios for each node by dividing the # NOQA
+ These averages are used to produce ratios for each node by dividing the
measured value for that node by the network average.
::
@@ -91,15 +91,15 @@ It is the minimum of all the descriptor bandwidth values::
bw_observed = min(bws)
return Router(ns.idhex, ns.nickname, bw_observed, dead, exitpolicy,
- ns.flags, ip, version, os, uptime, published, contact, rate_limited, # NOQA
+ ns.flags, ip, version, os, uptime, published, contact, rate_limited,
ns.orhash, ns.bandwidth, extra_info_digest, ns.unmeasured)
self.desc_bw = max(bw,1) # Avoid div by 0
**new_bw**::
- These ratios are then multiplied by the most recent observed descriptor # NOQA
- bandwidth we have available for each node, to produce a new value for # NOQA
+ These ratios are then multiplied by the most recent observed descriptor
+ bandwidth we have available for each node, to produce a new value for
the network status consensus process.
::
@@ -115,7 +115,7 @@ The descriptor observed bandwidth is multiplied by the ratio.
::
if n.new_bw > tot_net_bw*NODE_CAP:
- plog("INFO", "Clipping extremely fast "+n.node_class()+" node "+n.idhex+"="+n.nick+ # NOQA
+ plog("INFO", "Clipping extremely fast "+n.node_class()+" node "+n.idhex+"="+n.nick+
" at "+str(100*NODE_CAP)+"% of network capacity ("+
str(n.new_bw)+"->"+str(int(tot_net_bw*NODE_CAP))+") "+
" pid_error="+str(n.pid_error)+
diff --git a/sbws/lib/v3bwfile.py b/sbws/lib/v3bwfile.py
index 56925cb..a585bb7 100644
--- a/sbws/lib/v3bwfile.py
+++ b/sbws/lib/v3bwfile.py
@@ -1207,152 +1207,7 @@ class V3BWFile(object):
Obtain final bandwidth measurements applying Torflow's scaling
method.
- From Torflow's README.spec.txt (section 2.2)::
-
- In this way, the resulting network status consensus bandwidth values # NOQA
- are effectively re-weighted proportional to how much faster the node # NOQA
- was as compared to the rest of the network.
-
- The variables and steps used in Torflow:
-
- **strm_bw**::
-
- The strm_bw field is the average (mean) of all the streams for the relay # NOQA
- identified by the fingerprint field.
- strm_bw = sum(bw stream x)/|n stream|
-
- **filt_bw**::
-
- The filt_bw field is computed similarly, but only the streams equal to # NOQA
- or greater than the strm_bw are counted in order to filter very slow # NOQA
- streams due to slow node pairings.
-
- **filt_sbw and strm_sbw**::
-
- for rs in RouterStats.query.filter(stats_clause).\
- options(eagerload_all('router.streams.circuit.routers')).all(): # NOQA
- tot_sbw = 0
- sbw_cnt = 0
- for s in rs.router.streams:
- if isinstance(s, ClosedStream):
- skip = False
- #for br in badrouters:
- # if br != rs:
- # if br.router in s.circuit.routers:
- # skip = True
- if not skip:
- # Throw out outliers < mean
- # (too much variance for stddev to filter much)
- if rs.strm_closed == 1 or s.bandwidth() >= rs.sbw:
- tot_sbw += s.bandwidth()
- sbw_cnt += 1
-
- if sbw_cnt: rs.filt_sbw = tot_sbw/sbw_cnt
- else: rs.filt_sbw = None
-
- **filt_avg, and strm_avg**::
-
- Once we have determined the most recent measurements for each node, we # NOQA
- compute an average of the filt_bw fields over all nodes we have measured. # NOQA
-
- ::
-
- filt_avg = sum(map(lambda n: n.filt_bw, nodes.itervalues()))/float(len(nodes)) # NOQA
- strm_avg = sum(map(lambda n: n.strm_bw, nodes.itervalues()))/float(len(nodes)) # NOQA
-
- **true_filt_avg and true_strm_avg**::
-
- for cl in ["Guard+Exit", "Guard", "Exit", "Middle"]:
- true_filt_avg[cl] = filt_avg
- true_strm_avg[cl] = strm_avg
-
- In the non-pid case, all types of nodes get the same avg
-
- **n.fbw_ratio and n.fsw_ratio**::
-
- for n in nodes.itervalues():
- n.fbw_ratio = n.filt_bw/true_filt_avg[n.node_class()]
- n.sbw_ratio = n.strm_bw/true_strm_avg[n.node_class()]
-
- **n.ratio**::
-
- These averages are used to produce ratios for each node by dividing the # NOQA
- measured value for that node by the network average.
-
- ::
-
- # Choose the larger between sbw and fbw
- if n.sbw_ratio > n.fbw_ratio:
- n.ratio = n.sbw_ratio
- else:
- n.ratio = n.fbw_ratio
-
- **desc_bw**:
-
- It is the minimum of all the descriptor bandwidth values::
-
- bws = map(int, g)
- bw_observed = min(bws)
-
- return Router(ns.idhex, ns.nickname, bw_observed, dead, exitpolicy,
- ns.flags, ip, version, os, uptime, published, contact, rate_limited, # NOQA
- ns.orhash, ns.bandwidth, extra_info_digest, ns.unmeasured)
-
- self.desc_bw = max(bw,1) # Avoid div by 0
-
- **new_bw**::
-
- These ratios are then multiplied by the most recent observed descriptor # NOQA
- bandwidth we have available for each node, to produce a new value for # NOQA
- the network status consensus process.
-
- ::
-
- n.new_bw = n.desc_bw*n.ratio
-
- The descriptor observed bandwidth is multiplied by the ratio.
-
- **Limit the bandwidth to a maximum**::
-
- NODE_CAP = 0.05
-
- ::
-
- if n.new_bw > tot_net_bw*NODE_CAP:
- plog("INFO", "Clipping extremely fast "+n.node_class()+" node "+n.idhex+"="+n.nick+ # NOQA
- " at "+str(100*NODE_CAP)+"% of network capacity ("+
- str(n.new_bw)+"->"+str(int(tot_net_bw*NODE_CAP))+") "+
- " pid_error="+str(n.pid_error)+
- " pid_error_sum="+str(n.pid_error_sum))
- n.new_bw = int(tot_net_bw*NODE_CAP)
-
- However, tot_net_bw does not seems to be updated when not using pid.
- This clipping would make faster relays to all have the same value.
-
- All of that can be expressed as:
-
- .. math::
-
- bwn_i =& min\\left(bwnew_i,
- \\sum_{i=1}^{n}bwnew_i \\times 0.05\\right) \\
-
- &= min\\left(
- \\left(min\\left(bwobs_i, bwavg_i, bwbur_i \\right) \\times r_i\\right),
- \\sum_{i=1}^{n}\\left(min\\left(bwobs_i, bwavg_i, bwbur_i \\right) \\times r_i\\right)
- \\times 0.05\\right)\\
-
- &= min\\left(
- \\left(min\\left(bwobs_i, bwavg_i, bwbur_i \\right) \\times max\\left(rf_i, rs_i\\right)\\right),
- \\sum_{i=1}^{n}\\left(min\\left(bwobs_i, bwavg_i, bwbur_i \\right) \\times
- max\\left(rf_i, rs_i\\right)\\right) \\times 0.05\\right)\\
-
- &= min\\left(
- \\left(min\\left(bwobs_i, bwavg_i, bwbur_i \\right) \\times max\\left(\\frac{bwfilt_i}{bwfilt},
- \\frac{bw_i}{bwstrm}\\right)\\right),
- \\sum_{i=1}^{n}\\left(min\\left(bwobs_i, bwavg_i, bwbur_i \\right) \\times
- max\\left(\\frac{bwfilt_i}{bwfilt},
- \\frac{bw_i}{bwstrm}\\right)\\right) \\times 0.05\\right)
-
+ See details in :ref:`torflow_aggr`.
"""
log.info("Calculating relays' bandwidth using Torflow method.")
bw_lines_tf = copy.deepcopy(bw_lines)
_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits