[tor-commits] [ooni-probe/master] Add OONI installation instructions (#7760)

[art@xxxxxxxxxxxxxx]

commit a9fb1414b8a5c3f6806b532ed341991c5c41d965
Author: anadahz <kojgelo@xxxxxxxxx>
Date:   Sat Apr 26 17:53:38 2014 +0300

    Add OONI installation instructions (#7760)
    
    Add installation instructions for OONI to the documentation.
    https://trac.torproject.org/projects/tor/ticket/7760
---
 docs/source/index.rst |  198 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 198 insertions(+)

diff --git a/docs/source/index.rst b/docs/source/index.rst
index e425c4a..5be19c1 100644
--- a/docs/source/index.rst
+++ b/docs/source/index.rst
@@ -35,6 +35,204 @@ component for running the test.
 blocked from the probes network point of view. As such they usually require to
 have specified an input list for running the test.
 
+Installation
+------------
+
+**Read this before running ooniprobe!**
+
+Running ooniprobe is a potentially risky activity. This greatly depends on the
+jurisdiction in which you are in and which test you are running. It is
+technically possible for a person observing your internet connection to be
+aware of the fact that you are running ooniprobe. This means that if running
+network measurement tests is something considered to be illegal in your country
+then you could be spotted.
+
+Futhermore, ooniprobe takes no precautions to protect the install target machine
+from forensics analysis.  If the fact that you have installed or used ooni
+probe is a liability for you, please be aware of this risk.
+
+Debian based systems
+....................
+
+`sudo sh -c 'echo "deb http://deb.ooni.nu/ooni wheezy main" >> /etc/apt/sources.list'`
+
+`gpg --keyserver pgp.mit.edu --recv-key 0x49B8CDF4`
+
+`gpg --export 89AB86D4788F3785FE9EDA31F9E2D9B049B8CDF4 | sudo apt-key add -`
+
+`sudo apt-get update && sudo apt-get install ooniprobe`
+
+Linux
+.....
+
+We believe that ooniprobe runs reasonably well on Debian GNU/Linux wheezy as
+well as versions of Ubuntu such as natty and later releases. Running ooniprobe
+without installing it is supported with the following commands:
+
+`git clone https://git.torproject.org/ooni-probe.git`
+
+`cd ooni-probe`
+
+`./setup-dependencies.sh`
+
+`python setup.py install`
+
+Setting up development environment
+..................................
+
+On debian based systems this can be done with:
+
+`Vsudo apt-get install libgeoip-dev python-virtualenv virtualenvwrapper`
+
+`mkvirtualenv ooniprobe`
+
+`python setup.py install`
+
+`pip install -r requirements-dev.txt`
+
+Other platforms (with Vagrant)
+..............................
+
+`Install Vagrant <https://www.vagrantup.com/downloads.html>`_ 
+and `Install Virtualbox <https://www.virtualbox.org/wiki/Downloads>`_
+
+**On OSX:**
+
+If you don't have it install `homebrew <http://mxcl.github.io/homebrew/>`_
+
+`brew install git`
+
+**On debian/ubuntu:**
+
+`sudo apt-get install git`
+
+1. Open a Terminal and run:
+
+`git clone https://git.torproject.org/ooni-probe.git`
+
+`cd ooni-probe/`
+
+`vagrant up`
+
+2. Login to the box with:
+
+`vagrant ssh`
+
+ooniprobe will be installed in `/ooni`.
+
+3. You can run tests with:
+
+`ooniprobe blocking/http_requests -f /ooni/inputs/input-pack/alexa-top-1k.txt`
+
+Using ooniprobe
+---------------
+
+**Net test** is a set of measurements to assess what kind of internet censorship is occurring.
+
+**Decks** are collections of ooniprobe nettests with some associated inputs.
+
+**Collector** is a service used to report the results of measurements.
+
+**Test helper** is a service used by a probe for successfully performing its measurements.
+
+**Bouncer** is a service used to discover the addresses of test helpers and collectors.
+
+Configuring ooniprobe
+.....................
+
+You may edit the configuration for ooniprobe by editing the configuration file
+found inside of `~/.ooni/ooniprobe.conf`.
+
+By default ooniprobe will not include personal identifying information in the
+test result, nor create a pcap file. This behavior can be personalized.
+
+Running decks
+.............
+
+You will find all the installed decks inside of `/usr/share/ooni/decks`.
+
+You may then run a deck by using the command line option `-i`:
+
+As root:
+
+`ooniprobe -i /usr/share/ooni/decks/mlab.deck`
+
+Or as a user:
+
+`ooniprobe -i /usr/share/ooni/decks/mlab_no_root.deck`
+
+Or:
+
+As root:
+
+`ooniprobe -i /usr/share/ooni/decks/complete.deck`
+
+Or as a user:
+
+`ooniprobe -i /usr/share/ooni/decks/complete_no_root.deck`
+
+The above tests will require around 20-30 minutes to complete depending on your network speed.
+
+If you would prefer to run some faster tests you should run:
+As root:
+
+`ooniprobe -i /usr/share/ooni/decks/fast.deck`
+
+Or as a user:
+
+`ooniprobe -i /usr/share/ooni/decks/fast_no_root.deck`
+
+Running net tests
+.................
+
+You may list all the installed stable net tests with:
+
+`ooniprobe -s`
+
+You may then run a nettest by specifying its name for example:
+
+`ooniprobe manipulation/http_header_field_manipulation`
+
+It is also possible to specify inputs to tests as URLs:
+
+
+`ooniprobe blocking/http_requests -f httpo://ihiderha53f36lsd.onion/input/37e60e13536f6afe47a830bfb6b371b5cf65da66d7ad65137344679b24fdccd1`
+
+You can find the result of the test in your current working directory.
+
+By default the report result will be collected by the default ooni collector
+and the addresses of test helpers will be obtained from the default bouncer.
+
+You may also specify your own collector or bouncer with the options `-c` and
+`-b`.
+
+(Optional) Install obfsproxy
+----------------------------
+
+Install the latest version of obfsproxy for your platform.
+
+`Download Obfsproxy <https://www.torproject.org/projects/obfsproxy.html.en>`_
+
+Bridges and obfsproxy bridges
+-----------------------------
+
+ooniprobe submits reports to oonib report collectors through Tor to a hidden
+service endpoint. By default, ooniprobe uses the installed system Tor, but can
+also be configured to launch Tor (see the advanced.start_tor option in
+ooniprobe.conf), and ooniprobe supports bridges (and obfsproxy bridges, if
+obfsproxy is installed). The tor.bridges option in ooniprobe.conf sets the path
+to a file that should contain a set of "bridge" lines (of the same format as
+used in torrc, and as returned by https://bridges.torproject.org). If obfsproxy
+bridges are to be used, the path to the obfsproxy binary must be configured.
+See option advanced.obfsproxy_binary, in ooniprobe.conf.
+
+Setting capabilities on your virtualenv python binary
+-----------------------------------------------------
+
+If your distributation supports capabilities you can avoid needing to run OONI as root:
+
+`setcap cap_net_admin,cap_net_raw+eip /path/to/your/virtualenv's/python`
+
 Core ooniprobe Tests
 --------------------
 



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits