[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[tor-commits] [tor/release-0.3.3] doc: Move DOS options below SERVER options
commit 712a7d76a00789e88de731dc7f69616119bbe3e1
Author: David Goulet <dgoulet@xxxxxxxxxxxxxx>
Date: Thu Apr 12 10:40:03 2018 -0400
doc: Move DOS options below SERVER options
Signed-off-by: David Goulet <dgoulet@xxxxxxxxxxxxxx>
---
doc/tor.1.txt | 257 +++++++++++++++++++++++++++++-----------------------------
1 file changed, 129 insertions(+), 128 deletions(-)
diff --git a/doc/tor.1.txt b/doc/tor.1.txt
index 8bb27fa5a..8ce374c12 100644
--- a/doc/tor.1.txt
+++ b/doc/tor.1.txt
@@ -2406,6 +2406,135 @@ details.)
(Default: 0)
+DENIAL OF SERVICE MITIGATION OPTIONS
+------------------------------------
+
+Tor has three built-in mitigation options that can be individually
+enabled/disabled and fine-tuned, but by default Tor directory authorities will
+define reasonable values for relays and no explicit configuration is required
+to make use of these protections. The mitigations are:
+
+ 1. If a single client address makes too many concurrent connections (this is
+ configurable via DoSConnectionMaxConcurrentCount), hang up on further
+ connections.
+ +
+ 2. If a single client IP address (v4 or v6) makes circuits too quickly
+ (default values are more than 3 per second, with an allowed burst of 90,
+ see DoSCircuitCreationRate and DoSCircuitCreationBurst) while also having
+ too many connections open (default is 3, see
+ DoSCircuitCreationMinConnections), tor will refuse any new circuit (CREATE
+ cells) for the next while (random value between 1 and 2 hours).
+ +
+ 3. If a client asks to establish a rendezvous point to you directly (ex:
+ Tor2Web client), ignore the request.
+
+These defenses can be manually controlled by torrc options, but relays will
+also take guidance from consensus parameters, so there's no need to configure
+anything manually. In doubt, do not change those values.
+
+The values set by the consensus, if any, can be found here:
+https://consensus-health.torproject.org/#consensusparams
+
+If any of the DoS mitigations are enabled, an heartbeat message will appear in
+your log at NOTICE level which looks like:
+
+ DoS mitigation since startup: 429042 circuits rejected, 17 marked addresses.
+ 2238 connections closed. 8052 single hop clients refused.
+
+The following options are useful only for a public relay. They control the
+Denial of Service mitigation subsystem described above.
+
+[[DoSCircuitCreationEnabled]] **DoSCircuitCreationEnabled** **0**|**1**|**auto**::
+
+ Enable circuit creation DoS mitigation. If set to 1 (enabled), tor will
+ cache client IPs along with statistics in order to detect circuit DoS
+ attacks. If an address is positively identified, tor will activate
+ defenses against the address. See the DoSCircuitCreationDefenseType option
+ for more details. This is a client to relay detection only. "auto" means
+ use the consensus parameter. If not defined in the consensus, the value is 0.
+ (Default: auto)
+
+[[DoSCircuitCreationMinConnections]] **DoSCircuitCreationMinConnections** __NUM__::
+
+ Minimum threshold of concurrent connections before a client address can be
+ flagged as executing a circuit creation DoS. In other words, once a client
+ address reaches the circuit rate and has a minimum of NUM concurrent
+ connections, a detection is positive. "0" means use the consensus
+ parameter. If not defined in the consensus, the value is 3.
+ (Default: 0)
+
+[[DoSCircuitCreationRate]] **DoSCircuitCreationRate** __NUM__::
+
+ The allowed circuit creation rate per second applied per client IP
+ address. If this option is 0, it obeys a consensus parameter. If not
+ defined in the consensus, the value is 3.
+ (Default: 0)
+
+[[DoSCircuitCreationBurst]] **DoSCircuitCreationBurst** __NUM__::
+
+ The allowed circuit creation burst per client IP address. If the circuit
+ rate and the burst are reached, a client is marked as executing a circuit
+ creation DoS. "0" means use the consensus parameter. If not defined in the
+ consensus, the value is 90.
+ (Default: 0)
+
+[[DoSCircuitCreationDefenseType]] **DoSCircuitCreationDefenseType** __NUM__::
+
+ This is the type of defense applied to a detected client address. The
+ possible values are:
+ +
+ 1: No defense.
+ +
+ 2: Refuse circuit creation for the DoSCircuitCreationDefenseTimePeriod period of time.
+ +
+ "0" means use the consensus parameter. If not defined in the consensus, the value is 2.
+ (Default: 0)
+
+[[DoSCircuitCreationDefenseTimePeriod]] **DoSCircuitCreationDefenseTimePeriod** __N__ **seconds**|**minutes**|**hours**::
+
+ The base time period in seconds that the DoS defense is activated for. The
+ actual value is selected randomly for each activation from N+1 to 3/2 * N.
+ "0" means use the consensus parameter. If not defined in the consensus,
+ the value is 3600 seconds (1 hour).
+ (Default: 0)
+
+[[DoSConnectionEnabled]] **DoSConnectionEnabled** **0**|**1**|**auto**::
+
+ Enable the connection DoS mitigation. If set to 1 (enabled), for client
+ address only, this allows tor to mitigate against large number of
+ concurrent connections made by a single IP address. "auto" means use the
+ consensus parameter. If not defined in the consensus, the value is 0.
+ (Default: auto)
+
+[[DoSConnectionMaxConcurrentCount]] **DoSConnectionMaxConcurrentCount** __NUM__::
+
+ The maximum threshold of concurrent connection from a client IP address.
+ Above this limit, a defense selected by DoSConnectionDefenseType is
+ applied. "0" means use the consensus parameter. If not defined in the
+ consensus, the value is 100.
+ (Default: 0)
+
+[[DoSConnectionDefenseType]] **DoSConnectionDefenseType** __NUM__::
+
+ This is the type of defense applied to a detected client address for the
+ connection mitigation. The possible values are:
+ +
+ 1: No defense.
+ +
+ 2: Immediately close new connections.
+ +
+ "0" means use the consensus parameter. If not defined in the consensus, the value is 2.
+ (Default: 0)
+
+[[DoSRefuseSingleHopClientRendezvous]] **DoSRefuseSingleHopClientRendezvous** **0**|**1**|**auto**::
+
+ Refuse establishment of rendezvous points for single hop clients. In other
+ words, if a client directly connects to the relay and sends an
+ ESTABLISH_RENDEZVOUS cell, it is silently dropped. "auto" means use the
+ consensus parameter. If not defined in the consensus, the value is 0.
+ (Default: auto)
+
+
DIRECTORY AUTHORITY SERVER OPTIONS
----------------------------------
@@ -2752,134 +2881,6 @@ The following options are used to configure a hidden service.
including setting SOCKSPort to "0". Can not be changed while tor is
running. (Default: 0)
-DENIAL OF SERVICE MITIGATION OPTIONS
-------------------------------------
-
-Tor has three built-in mitigation options that can be individually
-enabled/disabled and fine-tuned, but by default Tor directory authorities will
-define reasonable values for relays and no explicit configuration is required
-to make use of these protections. The mitigations are:
-
- 1. If a single client address makes too many concurrent connections (this
- is configurable via DoSConnectionMaxConcurrentCount), hang up on
- further connections.
- +
- 2. If a single client IP address (v4 or v6) makes circuits too quickly
- (default values are more than 3 per second, with an allowed burst of 90,
- see DoSCircuitCreationRate and DoSCircuitCreationBurst) while also having
- too many connections open (default is 3, see
- DoSCircuitCreationMinConnections), tor will refuse any new circuit
- (CREATE cells) for the next while (random value between 1 and 2 hours).
- +
- 3. If a client asks to establish a rendezvous point to you directly (ex:
- Tor2Web client), ignore the request.
-
-These defenses can be manually controlled by torrc options, but relays will
-also take guidance from consensus parameters, so there's no need to configure
-anything manually. In doubt, do not change those values.
-
-The values set by the consensus, if any, can be found here:
-https://consensus-health.torproject.org/#consensusparams
-
-If any of the DoS mitigations are enabled, an heartbeat message will appear in
-your log at NOTICE level which looks like:
-
- DoS mitigation since startup: 429042 circuits rejected, 17 marked addresses.
- 2238 connections closed. 8052 single hop clients refused.
-
-The following options are useful only for a public relay. They control the
-Denial of Service mitigation subsystem described above.
-
-[[DoSCircuitCreationEnabled]] **DoSCircuitCreationEnabled** **0**|**1**|**auto**::
-
- Enable circuit creation DoS mitigation. If set to 1 (enabled), tor will
- cache client IPs along with statistics in order to detect circuit DoS
- attacks. If an address is positively identified, tor will activate
- defenses against the address. See the DoSCircuitCreationDefenseType option
- for more details. This is a client to relay detection only. "auto" means
- use the consensus parameter. If not defined in the consensus, the value is 0.
- (Default: auto)
-
-[[DoSCircuitCreationMinConnections]] **DoSCircuitCreationMinConnections** __NUM__::
-
- Minimum threshold of concurrent connections before a client address can be
- flagged as executing a circuit creation DoS. In other words, once a client
- address reaches the circuit rate and has a minimum of NUM concurrent
- connections, a detection is positive. "0" means use the consensus
- parameter. If not defined in the consensus, the value is 3.
- (Default: 0)
-
-[[DoSCircuitCreationRate]] **DoSCircuitCreationRate** __NUM__::
-
- The allowed circuit creation rate per second applied per client IP
- address. If this option is 0, it obeys a consensus parameter. If not
- defined in the consensus, the value is 3.
- (Default: 0)
-
-[[DoSCircuitCreationBurst]] **DoSCircuitCreationBurst** __NUM__::
-
- The allowed circuit creation burst per client IP address. If the circuit
- rate and the burst are reached, a client is marked as executing a circuit
- creation DoS. "0" means use the consensus parameter. If not defined in the
- consensus, the value is 90.
- (Default: 0)
-
-[[DoSCircuitCreationDefenseType]] **DoSCircuitCreationDefenseType** __NUM__::
-
- This is the type of defense applied to a detected client address. The
- possible values are:
-
- 1: No defense.
- 2: Refuse circuit creation for the DoSCircuitCreationDefenseTimePeriod period of time.
-+
- "0" means use the consensus parameter. If not defined in the consensus,
- the value is 2.
- (Default: 0)
-
-[[DoSCircuitCreationDefenseTimePeriod]] **DoSCircuitCreationDefenseTimePeriod** __N__ **seconds**|**minutes**|**hours**::
-
- The base time period in seconds that the DoS defense is activated for. The
- actual value is selected randomly for each activation from N+1 to 3/2 * N.
- "0" means use the consensus parameter. If not defined in the consensus,
- the value is 3600 seconds (1 hour).
- (Default: 0)
-
-[[DoSConnectionEnabled]] **DoSConnectionEnabled** **0**|**1**|**auto**::
-
- Enable the connection DoS mitigation. If set to 1 (enabled), for client
- address only, this allows tor to mitigate against large number of
- concurrent connections made by a single IP address. "auto" means use the
- consensus parameter. If not defined in the consensus, the value is 0.
- (Default: auto)
-
-[[DoSConnectionMaxConcurrentCount]] **DoSConnectionMaxConcurrentCount** __NUM__::
-
- The maximum threshold of concurrent connection from a client IP address.
- Above this limit, a defense selected by DoSConnectionDefenseType is
- applied. "0" means use the consensus parameter. If not defined in the
- consensus, the value is 100.
- (Default: 0)
-
-[[DoSConnectionDefenseType]] **DoSConnectionDefenseType** __NUM__::
-
- This is the type of defense applied to a detected client address for the
- connection mitigation. The possible values are:
-
- 1: No defense.
- 2: Immediately close new connections.
-+
- "0" means use the consensus parameter. If not defined in the consensus,
- the value is 2.
- (Default: 0)
-
-[[DoSRefuseSingleHopClientRendezvous]] **DoSRefuseSingleHopClientRendezvous** **0**|**1**|**auto**::
-
- Refuse establishment of rendezvous points for single hop clients. In other
- words, if a client directly connects to the relay and sends an
- ESTABLISH_RENDEZVOUS cell, it is silently dropped. "auto" means use the
- consensus parameter. If not defined in the consensus, the value is 0.
- (Default: auto)
-
TESTING NETWORK OPTIONS
-----------------------
_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits