[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[tor-commits] [ooni-probe/master] Add configs for lepidopter update
commit 6217c6533f4977024e3d2d23168e05f8c06ae3f3
Author: Arturo Filastò <arturo@xxxxxxxxxxx>
Date: Tue Jul 12 12:22:24 2016 +0200
Add configs for lepidopter update
---
data/configs/lepidopter-ooniprobe.conf | 75 +++++++++++++++++++++++++++++++++
data/configs/lepidopter-oonireport.conf | 69 ++++++++++++++++++++++++++++++
2 files changed, 144 insertions(+)
diff --git a/data/configs/lepidopter-ooniprobe.conf b/data/configs/lepidopter-ooniprobe.conf
new file mode 100644
index 0000000..5c8ba40
--- /dev/null
+++ b/data/configs/lepidopter-ooniprobe.conf
@@ -0,0 +1,75 @@
+# This is the configuration file for OONIProbe
+# This file follows the YAML markup format: http://yaml.org/spec/1.2/spec.html
+# Keep in mind that indentation matters.
+
+basic:
+ # Where OONIProbe should be writing it's log file
+ logfile: /var/log/ooni/ooniprobe.log
+ # in the future we will support loglevels
+ loglevel: WARNING
+privacy:
+ # Should we include the IP address of the probe in the report?
+ includeip: false
+ # Should we include the ASN of the probe in the report?
+ includeasn: true
+ # Should we include the country as reported by GeoIP in the report?
+ includecountry: true
+ # Should we include the city as reported by GeoIP in the report?
+ includecity: false
+ # Should we collect a full packet capture on the client?
+ includepcap: false
+reports:
+ # Should we place a unique ID inside of every report
+ unique_id: true
+ # This is a prefix for each packet capture file (.pcap) per test:
+ pcap: null
+ collector: null
+advanced:
+ geoip_data_dir: /usr/share/GeoIP
+ debug: false
+ # enable if auto detection fails
+ #tor_binary: /usr/sbin/tor
+ #obfsproxy_binary: /usr/bin/obfsproxy
+ # For auto detection
+ interface: auto
+ # Of specify a specific interface
+ #interface: wlan0
+ # If you do not specify start_tor, you will have to have Tor running and
+ # explicitly set the control port and SOCKS port
+ start_tor: true
+ # After how many seconds we should give up on a particular measurement
+ measurement_timeout: 120
+ # After how many retries we should give up on a measurement
+ measurement_retries: 2
+ # How many measurements to perform concurrently
+ measurement_concurrency: 4
+ # After how may seconds we should give up reporting
+ reporting_timeout: 360
+ # After how many retries to give up on reporting
+ reporting_retries: 5
+ # How many reports to perform concurrently
+ reporting_concurrency: 7
+ oonid_api_port: 8042
+ report_log_file: null
+ inputs_dir: null
+ decks_dir: null
+tor:
+ #socks_port: 8801
+ #control_port: 8802
+ # Specify the absolute path to the Tor bridges to use for testing
+ #bridges: bridges.list
+ # Specify path of the tor datadirectory.
+ # This should be set to something to avoid having Tor download each time
+ # the descriptors and consensus data.
+ data_dir: /opt/ooni/tor_data_dir
+torrc:
+ #HTTPProxy: host:port
+ #HTTPProxyAuthenticator: user:password
+ #HTTPSProxy: host:port
+ #HTTPSProxyAuthenticator: user:password
+ # Uncomment following 5 lines to connect via meek pluggable transport in tor
+ #UseBridges: 1
+ #Bridge:
+ #- "meek_lite 0.0.2.0:1 url=https://d2zfqthxsdq309.cloudfront.net/ front=a0.awsstatic.com"
+ #- "meek_lite 0.0.2.0:2 url=https://az786092.vo.msecnd.net/ front=ajax.aspnetcdn.com"
+ #ClientTransportPlugin: "meek_lite exec /usr/bin/obfs4proxy"
diff --git a/data/configs/lepidopter-oonireport.conf b/data/configs/lepidopter-oonireport.conf
new file mode 100644
index 0000000..8ea3ccc
--- /dev/null
+++ b/data/configs/lepidopter-oonireport.conf
@@ -0,0 +1,69 @@
+# This is the configuration file for OONIProbe
+# This file follows the YAML markup format: http://yaml.org/spec/1.2/spec.html
+# Keep in mind that indentation matters.
+
+basic:
+ # Where OONIProbe should be writing it's log file
+ logfile: /var/log/ooni/oonireport.log
+ # in the future we will support loglevels
+ loglevel: WARNING
+privacy:
+ # Should we include the IP address of the probe in the report?
+ includeip: false
+ # Should we include the ASN of the probe in the report?
+ includeasn: true
+ # Should we include the country as reported by GeoIP in the report?
+ includecountry: true
+ # Should we include the city as reported by GeoIP in the report?
+ includecity: false
+ # Should we collect a full packet capture on the client?
+ includepcap: false
+reports:
+ # Should we place a unique ID inside of every report
+ unique_id: true
+ # This is a prefix for each packet capture file (.pcap) per test:
+ pcap: null
+ collector: null
+advanced:
+ geoip_data_dir: /usr/share/GeoIP
+ debug: false
+ # enable if auto detection fails
+ #tor_binary: /usr/sbin/tor
+ #obfsproxy_binary: /usr/bin/obfsproxy
+ # For auto detection
+ interface: auto
+ # Of specify a specific interface
+ #interface: wlan0
+ # If you do not specify start_tor, you will have to have Tor running and
+ # explicitly set the control port and SOCKS port
+ start_tor: false
+ # After how many seconds we should give up on a particular measurement
+ measurement_timeout: 120
+ # After how many retries we should give up on a measurement
+ measurement_retries: 2
+ # How many measurements to perform concurrently
+ measurement_concurrency: 4
+ # After how may seconds we should give up reporting
+ reporting_timeout: 360
+ # After how many retries to give up on reporting
+ reporting_retries: 5
+ # How many reports to perform concurrently
+ reporting_concurrency: 7
+ oonid_api_port: 8042
+ report_log_file: null
+ inputs_dir: null
+ decks_dir: null
+tor:
+ socks_port: 9050
+ #control_port: 8802
+ # Specify the absolute path to the Tor bridges to use for testing
+ #bridges: bridges.list
+ # Specify path of the tor datadirectory.
+ # This should be set to something to avoid having Tor download each time
+ # the descriptors and consensus data.
+ #data_dir: ~/.tor/
+ torrc:
+ #HTTPProxy: host:port
+ #HTTPProxyAuthenticator: user:password
+ #HTTPSProxy: host:port
+ #HTTPSProxyAuthenticator: user:password
_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits