[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[tor-commits] [community/master] Imported bridges obfs4 deployment guide for debian, centos, freebsd, openbsd

To: tor-commits@xxxxxxxxxxxxxxxxxxxx
Subject: [tor-commits] [community/master] Imported bridges obfs4 deployment guide for debian, centos, freebsd, openbsd
From: hiro@xxxxxxxxxxxxxx
Date: Fri, 5 Jul 2019 13:23:33 +0000 (UTC)
Delivered-to: archiver@xxxxxxxx
Delivery-date: Fri, 05 Jul 2019 09:24:00 -0400
List-archive: <http://lists.torproject.org/pipermail/tor-commits/>
List-help: <mailto:tor-commits-request@lists.torproject.org?subject=help>
List-id: "auto: code repository commits" <tor-commits.lists.torproject.org>
List-post: <mailto:tor-commits@lists.torproject.org>
List-subscribe: <https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits>, <mailto:tor-commits-request@lists.torproject.org?subject=subscribe>
List-unsubscribe: <https://lists.torproject.org/cgi-bin/mailman/options/tor-commits>, <mailto:tor-commits-request@lists.torproject.org?subject=unsubscribe>
Patch-author: gus <gus@xxxxxxxxxxxxxx>
Sender: "tor-commits" <tor-commits-bounces@xxxxxxxxxxxxxxxxxxxx>
commit 303d780bdadd4837b44b74c80add451cc7bf8887
Author: gus <gus@xxxxxxxxxxxxxx>
Date:   Thu Jul 4 14:47:49 2019 -0400

    Imported bridges obfs4 deployment guide for debian, centos, freebsd, openbsd
---
 .../centos-rhel-opensuse/contents.lr               | 101 +++++++++++++++++++++
 .../bridge-deployment-guide/contents.lr            |  19 ++++
 .../debian-ubuntu/contents.lr                      |  80 ++++++++++++++++
 .../bridge-deployment-guide/freebsd/contents.lr    |  98 ++++++++++++++++++++
 .../bridge-deployment-guide/openbsd/contents.lr    |   7 ++
 .../post-install/contents.lr                       |  22 +++++
 6 files changed, 327 insertions(+)

diff --git a/content/relay-operations/technical-setup/bridge-deployment-guide/centos-rhel-opensuse/contents.lr b/content/relay-operations/technical-setup/bridge-deployment-guide/centos-rhel-opensuse/contents.lr
new file mode 100644
index 0000000..22d0f46
--- /dev/null
+++ b/content/relay-operations/technical-setup/bridge-deployment-guide/centos-rhel-opensuse/contents.lr
@@ -0,0 +1,101 @@
+_model: page
+---
+title: CentOS / RHEL / OpenSUSE
+---
+body:
+
+# 1. Install tor and dependencies 
+
+* Redhat / RHEL:
+
+```
+yum install epel-release
+yum install git golang tor
+```
+
+* OpenSUSE:
+
+```
+zypper install tor go git
+```
+
+# 2. Build obfs4proxy and move it into place. 
+
+Heavily outdated versions of git can make `go get` fail, so try upgrading to a more recent git version if you're running into this problem.
+
+* CentOS / RHEL:
+
+```
+export GOPATH=`mktemp -d`
+go get gitlab.com/yawning/obfs4.git/obfs4proxy
+sudo cp $GOPATH/bin/obfs4proxy /usr/local/bin/
+chcon --reference=/usr/bin/tor /usr/local/bin/obfs4proxy
+```
+
+* OpenSUSE:
+
+```
+export GOPATH=`mktemp -d`
+go get gitlab.com/yawning/obfs4.git/obfs4proxy
+sudo cp $GOPATH/bin/obfs4proxy /usr/local/bin/
+```
+
+# 3. Edit your Tor config file, usually located at `/etc/tor/torrc` and add the following lines:
+
+```
+#Bridge config
+RunAsDaemon 1
+ORPort auto
+BridgeRelay 1
+ServerTransportPlugin obfs4 exec /usr/local/bin/obfs4proxy
+# For a fixed obfs4 port (e.g. 34176), uncomment the following line.
+#ServerTransportListenAddr obfs4 0.0.0.0:34176
+# Local communication port between Tor and obfs4. Always set this to "auto". "Ext" means
+# "extended", not "external". Don't try to set a specific port number, nor listen on 0.0.0.0.
+ExtORPort auto
+
+# Contact information that allows us to get in touch with you in case of
+# critical updates or problems with your bridge.  This is optional, so you
+# don't have to provide an email address if you don't want to.
+ContactInfo <address@xxxxxxxxx>
+# Pick a nickname that you like for your bridge.
+Nickname PickANickname
+```
+
+Don't forget to change the ContactInfo and Nickname options.
+
+* Note that both Tor's OR port **and** its obfs4 port must be reachable. If your bridge is behind a firewall or NAT, make sure to open both ports.
+
+# 4. Restart tor
+
+`systemctl restart tor`
+
+# 5. Monitor your logs (usually in your syslog)
+
+To confirm your bridge is running with no issues, you should see something like this:
+
+``` 
+[notice] Your Tor server's identity key fingerprint is '<NICKNAME> <FINGERPRINT>'
+[notice] Your Tor bridge's hashed identity key fingerprint is '<NICKNAME> <HASHED FINGERPRINT>'
+[notice] Registered server transport 'obfs4' at '[::]:46396'
+[notice] Tor has successfully opened a circuit. Looks like client functionality is working.
+[notice] Bootstrapped 100%: Done
+[notice] Now checking whether ORPort <redacted>:9001 is reachable... (this may take up to 20 minutes -- look for log messages indicating success)
+[notice] Self-testing indicates your ORPort is reachable from the outside. Excellent. Publishing server descriptor.
+``` 
+
+Remember to open the random port associated with your bridge. You can find it in your tor log; in the above example it is 46396. To use a fixed port, uncomment the [ServerTransportListenAddr](https://www.torproject.org/docs/tor-manual.html.en#ServerTransportListenAddr) option in your torrc. You can use [our reachability test](https://bridges.torproject.org/scan/) to see if your obfs4 port is reachable from the Internet.
+
+
+---
+html: two-columns-page.html
+---
+key:
+
+2 
+---
+color: primary
+---
+subtitle: How to deploy obfs4proxy on CentOS / RHEL
+---
+_template: layout.html
diff --git a/content/relay-operations/technical-setup/bridge-deployment-guide/contents.lr b/content/relay-operations/technical-setup/bridge-deployment-guide/contents.lr
new file mode 100644
index 0000000..b542590
--- /dev/null
+++ b/content/relay-operations/technical-setup/bridge-deployment-guide/contents.lr
@@ -0,0 +1,19 @@
+_model: page
+---
+title:
+
+ Bridge deployment
+---
+body:
+
+This guide will help you run an obfs4 bridge to help censored users connect to the Tor network. The requirements are 1) 24/7 Internet connectivity and 2) the ability to expose TCP ports to the Internet (make sure that NAT doesn't get in the way). 
+---
+html: two-columns-page.html
+---
+key: 1
+---
+section: Bridge operations
+---
+section_id: bridge-operations
+---
+subtitle: Run an obfs4 bridge to help censored users connect to the Tor network
diff --git a/content/relay-operations/technical-setup/bridge-deployment-guide/debian-ubuntu/contents.lr b/content/relay-operations/technical-setup/bridge-deployment-guide/debian-ubuntu/contents.lr
new file mode 100644
index 0000000..6bb7b79
--- /dev/null
+++ b/content/relay-operations/technical-setup/bridge-deployment-guide/debian-ubuntu/contents.lr
@@ -0,0 +1,80 @@
+_model: page
+---
+title: Debian / Ubuntu
+---
+body:
+
+# 1. Install Tor
+
+Get the latest version of Tor. If you're on Debian stable, `sudo apt-get install tor` should give you the latest stable version of Tor.
+
+* Note:''' Ubuntu users need to get it from Tor repository. Please see [Download instructions for Ubuntu](https://www.torproject.org/docs/debian.html.en#ubuntu).
+
+# 2. Install obfs4proxy
+
+On [Debian](https://packages.debian.org/search?keywords=obfs4proxy), the `obfs4proxy` package is available in sid, buster, and stretch. On [https://packages.ubuntu.com/search?keywords=obfs4proxy Ubuntu], bionic, cosmic, disco, and eoan have the package. If you're running any of them, `sudo apt-get install obfs4proxy` should work.
+
+If not, you can [build it from source](https://gitlab.com/yawning/obfs4#installation).
+
+# 3. Edit your Tor config file, usually located at `/etc/tor/torrc` and add the following lines:
+
+```
+#Bridge config
+RunAsDaemon 1
+ORPort auto
+BridgeRelay 1
+ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy
+# For a fixed obfs4 port (e.g. 34176), uncomment the following line.
+#ServerTransportListenAddr obfs4 0.0.0.0:34176
+# Local communication port between Tor and obfs4. Always set this to "auto". "Ext" means
+# "extended", not "external". Don't try to set a specific port number, nor listen on 0.0.0.0.
+ExtORPort auto
+
+# Contact information that allows us to get in touch with you in case of
+# critical updates or problems with your bridge.  This is optional, so you
+# don't have to provide an email address if you don't want to.
+ContactInfo <address@xxxxxxxxx>
+# Pick a nickname that you like for your bridge.
+Nickname PickANickname
+```
+
+Don't forget to change the ContactInfo and Nickname options.
+
+* If you decide to use a fixed obfs4 port smaller than 1024 (for example 80 or 443), you will need to give obfs4 `CAP_NET_BIND_SERVICE` capabilities to bind the port with a non-root user: 
+
+```
+sudo setcap cap_net_bind_service=+ep /usr/bin/obfs4proxy
+```
+
+* Under Debian, you will also need to set `NoNewPrivileges=no` in `/lib/systemd/system/tor@default.service` and `/lib/systemd/system/tor@.service` and then run `systemctl daemon-reload`. [bug #18356](https://trac.torproject.org/projects/tor/ticket/18356)
+
+* Note that both Tor's OR port **and** its obfs4 port must be reachable. If your bridge is behind a firewall or NAT, make sure to open both ports.
+
+# 4. Restart tor
+
+`systemctl restart tor`
+
+# 5. Monitor your logs 
+
+To confirm your bridge is running with no issues, you should see something like this (usually in `/var/log/tor/log` or `/var/log/syslog`):
+
+
+```
+[notice] Your Tor server's identity key fingerprint is '<NICKNAME> <FINGERPRINT>'
+[notice] Your Tor bridge's hashed identity key fingerprint is '<NICKNAME> <HASHED FINGERPRINT>'
+[notice] Registered server transport 'obfs4' at '[::]:46396'
+[notice] Tor has successfully opened a circuit. Looks like client functionality is working.
+[notice] Bootstrapped 100%: Done
+[notice] Now checking whether ORPort <redacted>:9001 is reachable... (this may take up to 20 minutes -- look for log messages indicating success)
+[notice] Self-testing indicates your ORPort is reachable from the outside. Excellent. Publishing server descriptor.
+```
+
+Remember to open the random port associated with your bridge. You can find it in your tor log; in the above example it is 46396. To use a fixed port, uncomment the [ServerTransportListenAddr](https://www.torproject.org/docs/tor-manual.html.en#ServerTransportListenAddr) option in your torrc. You can use [our reachability test](https://bridges.torproject.org/scan/) to see if your obfs4 port is reachable from the Internet.
+
+
+---
+key: 1
+---
+html: two-columns-page.html
+---
+subtitle: Follow the steps below to deploy obfs4proxy on Debian / Ubuntu
diff --git a/content/relay-operations/technical-setup/bridge-deployment-guide/freebsd/contents.lr b/content/relay-operations/technical-setup/bridge-deployment-guide/freebsd/contents.lr
new file mode 100644
index 0000000..e14737e
--- /dev/null
+++ b/content/relay-operations/technical-setup/bridge-deployment-guide/freebsd/contents.lr
@@ -0,0 +1,98 @@
+_model: page
+---
+title: FreeBSD
+---
+html: two-columns-page.html
+---
+key: 3
+---
+body:
+
+# 1. Install packages
+
+```
+pkg install obfs4proxy-tor tor ca_root_nss
+```
+
+# 2. Edit your Tor config file, usually located at `/usr/local/etc/tor` and add the following lines
+
+```
+#Bridge config
+RunAsDaemon 1
+ORPort auto
+BridgeRelay 1
+ServerTransportPlugin obfs4 exec /usr/local/bin/obfs4proxy
+# For a fixed obfs4 port (e.g. 34176), uncomment the following line.
+#ServerTransportListenAddr obfs4 0.0.0.0:34176
+# Local communication port between Tor and obfs4. Always set this to "auto". "Ext" means
+# "extended", not "external". Don't try to set a specific port number, nor listen on 0.0.0.0.
+ExtORPort auto
+
+# Contact information that allows us to get in touch with you in case of
+# critical updates or problems with your bridge.  This is optional, so you
+# don't have to provide an email address if you don't want to.
+ContactInfo <address@xxxxxxxxx>
+# Pick a nickname that you like for your bridge.
+Nickname PickANickname
+
+Log notice file /var/log/tor/notices.log
+```
+
+Don't forget to change the ContactInfo and Nickname options.
+
+* Note that both Tor's OR port **and** its obfs4 port must be reachable. If your bridge is behind a firewall or NAT, make sure to open both ports.
+
+# 3. Ensure that the `random_id` sysctl setting is enabled:
+
+```
+echo "net.inet.ip.random_id=1" >> /etc/sysctl.conf
+sysctl net.inet.ip.random_id=1
+```
+
+# 4. Start the tor daemon and make sure it starts at boot:
+
+```
+sysrc tor_enable=YES
+service tor start
+```
+
+# 5. Monitor your logs 
+
+To confirm your bridge is running with no issues, you should see something like this in `/var/log/tor/notices.log`:
+
+```
+[notice] Your Tor server's identity key fingerprint is '<NICKNAME> <FINGERPRINT>'
+[notice] Your Tor bridge's hashed identity key fingerprint is '<NICKNAME> <HASHED FINGERPRINT>'
+[notice] Registered server transport 'obfs4' at '[::]:46396'
+[notice] Tor has successfully opened a circuit. Looks like client functionality is working.
+[notice] Bootstrapped 100%: Done
+[notice] Now checking whether ORPort <redacted>:9001 is reachable... (this may take up to 20 minutes -- look for log messages indicating success)
+[notice] Self-testing indicates your ORPort is reachable from the outside. Excellent. Publishing server descriptor.
+```
+
+Remember to open the random port associated with your bridge. You can find it in your tor log; in the above example it is 46396. To use a fixed port, uncomment the [ ServerTransportListenAddr](https://www.torproject.org/docs/tor-manual.html.en#ServerTransportListenAddr) option in your torrc. You can use[our reachability test] (https://bridges.torproject.org/scan/) to see if your obfs4 port is reachable from the Internet.
+
+# 6. To get the fastest package updates, switch from the  "quarterly" package repo to the "latest" repo.
+
+Create the following folder:
+
+```
+mkdir -p /usr/local/etc/pkg/repos
+```
+
+Create the file `/usr/local/etc/pkg/repos/FreeBSD.conf` with the following content:
+
+```
+FreeBSD: { enabled: no }
+
+FreeBSDlatest: {
+  url: "pkg+https://pkg.FreeBSD.org/${ABI}/latest";,
+  mirror_type: "srv",
+  signature_type: "fingerprints",
+  fingerprints: "/usr/share/keys/pkg",
+  enabled: yes
+}
+```
+
+---
+subtitle: Follow the steps below to deploy obfs4proxy on FreeBSD
diff --git a/content/relay-operations/technical-setup/bridge-deployment-guide/openbsd/contents.lr b/content/relay-operations/technical-setup/bridge-deployment-guide/openbsd/contents.lr
new file mode 100644
index 0000000..24f1601
--- /dev/null
+++ b/content/relay-operations/technical-setup/bridge-deployment-guide/openbsd/contents.lr
@@ -0,0 +1,7 @@
+_model: page
+---
+title: OpenBSD
+---
+html: two-columns-page.html
+---
+key: 4
diff --git a/content/relay-operations/technical-setup/bridge-deployment-guide/post-install/contents.lr b/content/relay-operations/technical-setup/bridge-deployment-guide/post-install/contents.lr
new file mode 100644
index 0000000..e7f19cd
--- /dev/null
+++ b/content/relay-operations/technical-setup/bridge-deployment-guide/post-install/contents.lr
@@ -0,0 +1,22 @@
+_model: page
+---
+title: Post-install
+---
+body:
+
+Congrats! If you get to this point, it means that your obfs4 bridge is running and is being distributed by BridgeDB to censored users. If you want to connect to your bridge manually, you will need to know the bridge's obfs4 certificate. See the file `/var/lib/tor/pt_state/obfs4_bridgeline.txt` and paste the entire bridge line into Tor Browser:
+
+```
+Bridge obfs4 <IP ADDRESS>:<PORT> <FINGERPRINT> cert=<CERTIFICATE> iat-mode=0
+```
+
+You'll need to replace `<IP ADDRESS>`, `<PORT>`, and `<FINGERPRINT>` with the actual values, which you can find in the tor log. Make sure to use `<FINGERPRINT>`, not `<HASHED FINGERPRINT>`; and that `<PORT>` is the one from the log line `Registered server transport 'obfs4'`, not the one from the line `Now checking whether ORPort ... is reachable`.
+
+Finally, you can monitor your obfs4 bridge's usage on [Relay Search](https://metrics.torproject.org/rs.html#search).  Just enter your bridge's `<HASHED FINGERPRINT>` in the form and click "Search". After having set up the bridge, it takes approximately three hours for the bridge to show up in Relay Search.
+
+---
+html: two-columns-page.html
+---
+key: 5
+---
+subtitle: How to find your Bridge in Relay Search and connect manually



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits
Prev by Author: [tor-commits] [community/master] Add community resources - tor abuse templates, exit guidelines, tor universities, goodbadisps
Next by Author: [tor-commits] [community/master] Add submodule lego
Previous by thread: [tor-commits] [community/master] add Fedora relay instructions
Next by thread: [tor-commits] [community/master] Migrate content Tor Abuse Templates to lektor
Index(es):
- Author
- Thread