[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[or-cvs] r15272: In Steve Jobs parlance, "boom." The Tor osx bundle is now ju (in tor/trunk: contrib/osx doc)



Author: phobos
Date: 2008-06-15 08:51:51 -0400 (Sun, 15 Jun 2008)
New Revision: 15272

Removed:
   tor/trunk/contrib/osx/PrivoxyConfDesc.plist
   tor/trunk/contrib/osx/PrivoxyConfInfo.plist
   tor/trunk/contrib/osx/TorbuttonDesc.plist
   tor/trunk/contrib/osx/TorbuttonInfo.plist
   tor/trunk/contrib/osx/privoxy.config
Modified:
   tor/trunk/contrib/osx/Makefile.am
   tor/trunk/contrib/osx/Tor
   tor/trunk/contrib/osx/TorBundleDesc.plist.in
   tor/trunk/contrib/osx/TorBundleInfo.plist.in
   tor/trunk/contrib/osx/TorBundleWelcome.rtf
   tor/trunk/contrib/osx/TorPostflight
   tor/trunk/contrib/osx/TorPreFlight
   tor/trunk/contrib/osx/package.sh
   tor/trunk/contrib/osx/package_list.txt
   tor/trunk/doc/tor-osx-dmg-creation.txt
Log:
In Steve Jobs parlance, "boom."  The Tor osx bundle is now just Tor and
a startup script.  This is consistent with every other OS for which we
build packages.  If you want privoxy and torbutton, use the Vidalia
bundle.


Modified: tor/trunk/contrib/osx/Makefile.am
===================================================================
--- tor/trunk/contrib/osx/Makefile.am	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/Makefile.am	2008-06-15 12:51:51 UTC (rev 15272)
@@ -2,11 +2,8 @@
 # one from the top-level configure? -RD
 confdir = $(sysconfdir)/Tor
 
-EXTRA_DIST = PrivoxyConfDesc.plist PrivoxyConfInfo.plist          \
-    ReadMe.rtf StartupParameters.plist Tor TorBundleDesc.plist.in \
+EXTRA_DIST = ReadMe.rtf StartupParameters.plist Tor TorBundleDesc.plist.in \
     TorBundleInfo.plist.in TorBundleWelcome.rtf TorDesc.plist.in  \
     TorInfo.plist.in TorStartupDesc.plist.in TorStartupInfo.plist \
-    package.sh privoxy.config TorPostflight addsysuser            \
-    Tor_Uninstaller.applescript uninstall_tor_bundle.sh           \
-    TorbuttonInfo.plist TorbuttonDesc.plist                       \
-    package_list.txt tor_logo.gif TorPreFlight
+    package.sh TorPostflight addsysuser Tor_Uninstaller.applescript \
+    uninstall_tor_bundle.sh package_list.txt tor_logo.gif TorPreFlight

Deleted: tor/trunk/contrib/osx/PrivoxyConfDesc.plist
===================================================================
--- tor/trunk/contrib/osx/PrivoxyConfDesc.plist	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/PrivoxyConfDesc.plist	2008-06-15 12:51:51 UTC (rev 15272)
@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd";>
-<plist version="1.0">
-<dict>
-	<key>IFPkgDescriptionTitle</key>
-	<string>Privoxy configuration for Tor</string>
-	<key>IFPkgDescriptionVersion</key>
-	<string>0.1</string>
-</dict>
-</plist>

Deleted: tor/trunk/contrib/osx/PrivoxyConfInfo.plist
===================================================================
--- tor/trunk/contrib/osx/PrivoxyConfInfo.plist	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/PrivoxyConfInfo.plist	2008-06-15 12:51:51 UTC (rev 15272)
@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd";>
-<plist version="1.0">
-<dict>
-	<key>CFBundleIdentifier</key>
-	<string>Privoxy configuration for Tor</string>
-	<key>CFBundleGetInfoString</key>
-	<string>Privoxy configuration for Tor</string>
-	<key>CFBundleName</key>
-	<string>Privoxy configuration for Tor</string>
-	<key>CFBundleSortVersionString</key>
-	<string>0.1</string>
-	<key>IFPkgFlagAuthorizationAction</key>
-	<string>RootAuthorization</string>
-        <key>IFPkgFlagRestartAction</key>
-        <string>RecommendedRestart</string>
-	<key>IFPkgFlagFollowLinks</key>
-	<true/>
-	<key>IFPkgFlagIsRequired</key>
-	<false/>
-</dict>
-</plist>

Modified: tor/trunk/contrib/osx/Tor
===================================================================
--- tor/trunk/contrib/osx/Tor	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/Tor	2008-06-15 12:51:51 UTC (rev 15272)
@@ -25,6 +25,7 @@
 # the OS version
   OSVER=`/usr/bin/sw_vers | grep ProductVersion | cut -f2 | cut -d"." -f1,2`
       case "$OSVER" in
+    "10.6") OS="snowleopard" ARCH="universal";;
 	"10.5") OS="leopard" ARCH="universal";;
  	"10.4") OS="tiger" ARCH="universal";;
  	"10.3") OS="panther" ARCH="ppc";;

Modified: tor/trunk/contrib/osx/TorBundleDesc.plist.in
===================================================================
--- tor/trunk/contrib/osx/TorBundleDesc.plist.in	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorBundleDesc.plist.in	2008-06-15 12:51:51 UTC (rev 15272)
@@ -5,9 +5,9 @@
 	<key>IFPkgDescriptionDeleteWarning</key>
 	<string></string>
 	<key>IFPkgDescriptionDescription</key>
-	<string>Bundled package of Tor @VERSION@, Privoxy 3.0.6, and Torbutton.</string>
+	<string>Bundled package of Tor @VERSION@.</string>
 	<key>IFPkgDescriptionTitle</key>
-	<string>Tor - Privoxy - Torbutton Bundle</string>
+	<string>Tor Expert Bundle</string>
 	<key>IFPkgDescriptionVersion</key>
 	<string>@VERSION@</string>
 </dict>

Modified: tor/trunk/contrib/osx/TorBundleInfo.plist.in
===================================================================
--- tor/trunk/contrib/osx/TorBundleInfo.plist.in	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorBundleInfo.plist.in	2008-06-15 12:51:51 UTC (rev 15272)
@@ -22,28 +22,10 @@
 		</dict>
 		<dict>
 			<key>IFPkgFlagPackageLocation</key>
-			<string>Privoxy.pkg</string>
-			<key>IFPkgFlagPackageSelection</key>
-			<string>selected</string>
-		</dict>
-		<dict>
-			<key>IFPkgFlagPackageLocation</key>
-			<string>privoxyconf.pkg</string>
-			<key>IFPkgFlagPackageSelection</key>
-			<string>selected</string>
-		</dict>
-		<dict>
-			<key>IFPkgFlagPackageLocation</key>
 			<string>torstartup.pkg</string>
 			<key>IFPkgFlagPackageSelection</key>
 			<string>selected</string>
 		</dict>
-		<dict>
-			<key>IFPkgFlagPackageLocation</key>
-			<string>torbutton.pkg</string>
-			<key>IFPkgFlagPackageSelection</key>
-			<string>selected</string>
-		</dict>
 	</array>
         <key>IFPkgFormatVersion</key>
         <real>0.10000000149011612</real>

Modified: tor/trunk/contrib/osx/TorBundleWelcome.rtf
===================================================================
--- tor/trunk/contrib/osx/TorBundleWelcome.rtf	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorBundleWelcome.rtf	2008-06-15 12:51:51 UTC (rev 15272)
@@ -5,14 +5,10 @@
 \paperw11900\paperh16840\margl1440\margr1440\vieww9000\viewh9000\viewkind0
 \pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\ql\qnatural
 
-\f0\fs24 \cf0 Welcome to Tor - Privoxy - Torbutton Bundle installer.\
-This will install Tor, Privoxy, and Torbutton in your computer.\
+\f0\fs24 \cf0 Welcome to the Tor Expert installer.\
+This will install Tor in your computer.\
 \
 
-\f1\i Tor, Privoxy, and Torbutton are separate products.\
-They are packaged together for your convenience.
-\f2\i0\b \
-
 \f0\b0 \
 \pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural
 
@@ -22,17 +18,3 @@
 \
 	For more information, please visit https://www.torproject.org/\
 \
-
-\f2\b Privoxy
-\f0\b0  stands between your web browser and Tor to make your web surfing experience safer.\
-\
-	For more information, please visit http://www.privoxy.org/\
-\
-\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural\pardirnatural
-
-\f2\b \cf0 Torbutton
-\f0\b0  is a 1-click way for Firefox users to enable or disable the browser's use of Tor.   
-\f1\i Torbutton will not install if you do not have Firefox installed.
-\f0\i0 \
-\
-	For more information, please visit https://torbutton.torproject.org/}

Modified: tor/trunk/contrib/osx/TorPostflight
===================================================================
--- tor/trunk/contrib/osx/TorPostflight	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorPostflight	2008-06-15 12:51:51 UTC (rev 15272)
@@ -3,6 +3,7 @@
 #  TorPostFlight is distributed under this license
 #
 #  Copyright (c) 2006 Andrew Lewman
+#  Copyright (c) 2008 The Tor Project
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
@@ -46,7 +47,6 @@
 TARGET=$2/Library/Tor
 TORDIR=$TARGET/var/lib/tor
 LOGFILE=/var/log/tor.log
-TORBUTTON_VERSION="1.2.0rc2"
 
 # Check defaults for TARGET
 if [ "$TARGET" == "//Library/Tor" ]; then
@@ -97,10 +97,6 @@
 MAN1=$TARGET/share/man/man1
 #ln -sf $MAN1/*.1 .
 
-if [ -d /Library/StartupItems/Privoxy ]; then
-  find /Library/StartupItems/Privoxy -print0 | xargs -0 chown root:wheel
-fi
-
 # Copy Documentation
 if [ -d $PACKAGE_PATH/Contents/Resources/documents ];then
    cp -r $PACKAGE_PATH/Contents/Resources/documents $TARGET/documents
@@ -125,12 +121,3 @@
    rm -f /Library/StartupItems/Tor/Tor.loc
    echo "$TARGET" > /Library/StartupItems/Tor/Tor.loc
 fi
-
-# This only works if the user installing us is an Admin user.
-# Otherwise, this will silently fail to install torbutton in firefox.
-if [ -f /Applications/Firefox.app/Contents/MacOS/firefox ]; then
-  if [ -f /Library/Torbutton/torbutton-$TORBUTTON_VERSION.xpi ]; then
-# Open firefox with a prompt to install the torbutton xpi
-      su $USER open -a /Applications/Firefox.app /Library/Torbutton/torbutton-$TORBUTTON_VERSION.xpi
-  fi
-fi

Modified: tor/trunk/contrib/osx/TorPreFlight
===================================================================
--- tor/trunk/contrib/osx/TorPreFlight	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorPreFlight	2008-06-15 12:51:51 UTC (rev 15272)
@@ -5,6 +5,7 @@
 # TorPreFlight is distributed under this license:
 #
 # Copyright (c) 2006 Andrew Lewman
+# Copyright (c) 2008 The Tor Project
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
@@ -44,16 +45,7 @@
 	TORPATH="/Library/Tor/"
 fi
 
-if [ -f /Library/StartupItems/Privoxy/Privoxy.loc ]; then
-	PRIVOXYPATH=`cat /Library/StartupItems/Privoxy/Privoxy.loc`
-else
-	PRIVOXYPATH="/Library/Privoxy/"
-fi
-
 # Backup all of Tor, just in case
 if [ -d $TORPATH ]; then
   cp $TORPATH/torrc $TORPATH/torrc.installer-saved
-  cp $PRIVOXYPATH/config $PRIVOXYPATH/config.installer-saved
-  cp $PRIVOXYPATH/user.action $PRIVOXYPATH/user.action.installer-saved
 fi
-

Deleted: tor/trunk/contrib/osx/TorbuttonDesc.plist
===================================================================
--- tor/trunk/contrib/osx/TorbuttonDesc.plist	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorbuttonDesc.plist	2008-06-15 12:51:51 UTC (rev 15272)
@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd";>
-<plist version="1.0">
-<dict>
-	<key>IFPkgDescriptionTitle</key>
-	<string>Torbutton Extension for Firefox</string>
-	<key>IFPkgDescriptionVersion</key>
-	<string>0.1</string>
-</dict>
-</plist>

Deleted: tor/trunk/contrib/osx/TorbuttonInfo.plist
===================================================================
--- tor/trunk/contrib/osx/TorbuttonInfo.plist	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/TorbuttonInfo.plist	2008-06-15 12:51:51 UTC (rev 15272)
@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd";>
-<plist version="1.0">
-<dict>
-	<key>CFBundleIdentifier</key>
-	<string>Torbutton Extension for Firefox</string>
-	<key>CFBundleGetInfoString</key>
-	<string>Torbutton configuration for Tor</string>
-	<key>CFBundleName</key>
-	<string>Torbutton configuration for Tor</string>
-	<key>CFBundleSortVersionString</key>
-	<string>0.1</string>
-	<key>IFPkgFlagAuthorizationAction</key>
-	<string>RootAuthorization</string>
-        <key>IFPkgFlagRestartAction</key>
-        <string>RecommendedRestart</string>
-	<key>IFPkgFlagFollowLinks</key>
-	<true/>
-	<key>IFPkgFlagIsRequired</key>
-	<false/>
-</dict>
-</plist>

Modified: tor/trunk/contrib/osx/package.sh
===================================================================
--- tor/trunk/contrib/osx/package.sh	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/package.sh	2008-06-15 12:51:51 UTC (rev 15272)
@@ -2,14 +2,12 @@
 # $Id$
 # Copyright 2004-2005 Nick Mathewson. 
 # Copyright 2005-2007 Andrew Lewman
+# Copyright 2008 The Tor Project
 # See LICENSE in Tor distribution for licensing information.
 
-# This script builds a Macintosh OS X metapackage containing 4 packages:
+# This script builds a Macintosh OS X metapackage containing 2 packages:
 #    - One for Tor.
-#    - One for Privoxy.
-#    - One for a tor-specific privoxy configuration script.
 #    - One for Startup scripts for Tor.
-#    - One for Torbutton, an extension for FireFox
 #
 # This script expects to be run from the toplevel makefile, with VERSION
 # set to the latest Tor version, and Tor already built.
@@ -18,15 +16,6 @@
 # Read the documentation located in tor/doc/tor-osx-dmg-creation.txt on
 # how to build Tor for OSX
 
-# Where have we put the zip file containing Privoxy?  Edit this if your
-# privoxy lives somewhere else.
-PRIVOXY_PKG_ZIP=~/tmp/privoxyosx_setup_3.0.6.zip
-
-# Where have we put the xpi and license for Torbutton? Edit this if your
-# torbutton and torbutton license live somewhere else.
-TORBUTTON_PATH=~/tmp/torbutton-1.2.0rc2.xpi
-TORBUTTON_LIC_PATH=~/tmp/LICENSE
-
 ###
 # Helpful info on OS X packaging:
 #   http://developer.apple.com/documentation/DeveloperTools/Conceptual/SoftwareDistribution/index.html
@@ -72,9 +61,7 @@
 mkdir $BUILD_DIR || exit 1
 for subdir in tor_packageroot tor_resources \
               torstartup_packageroot \
-              privoxyconf_packageroot \
               torbundle_resources \
-              torbutton_packageroot \
               output; do
     mkdir $BUILD_DIR/$subdir
 done
@@ -128,18 +115,6 @@
     -i contrib/osx/TorInfo.plist  \
     -d contrib/osx/TorDesc.plist
 
-### Put privoxy configuration package in place.
-mkdir -p $BUILD_DIR/privoxyconf_packageroot/Library/Privoxy
-cp contrib/osx/privoxy.config $BUILD_DIR/privoxyconf_packageroot/Library/Privoxy/config
-
-find $BUILD_DIR/privoxyconf_packageroot -print0 |sudo xargs -0 chown root:wheel
-
-$PACKAGEMAKER -build                      \
-    -p $BUILD_DIR/output/privoxyconf.pkg  \
-    -f $BUILD_DIR/privoxyconf_packageroot \
-    -i contrib/osx/PrivoxyConfInfo.plist  \
-    -d contrib/osx/PrivoxyConfDesc.plist
-
 ### Make Startup Script package
 
 mkdir -p $BUILD_DIR/torstartup_packageroot/Library/StartupItems/Tor
@@ -154,20 +129,6 @@
   -i contrib/osx/TorStartupInfo.plist  \
   -d contrib/osx/TorStartupDesc.plist
 
-### Make Torbutton Installation package
-
-mkdir -p $BUILD_DIR/torbutton_packageroot/Library/Torbutton
-cp $TORBUTTON_PATH $BUILD_DIR/torbutton_packageroot/Library/Torbutton/
-cp $TORBUTTON_LIC_PATH $BUILD_DIR/torbutton_packageroot/Library/Torbutton/Torbutton-LICENSE.txt
-
-find $BUILD_DIR/torbutton_packageroot -print0 | sudo xargs -0 chown root:wheel
-
-$PACKAGEMAKER -build 		       	\
-  -p $BUILD_DIR/output/torbutton.pkg	\
-  -f $BUILD_DIR/torbutton_packageroot 	\
-  -i contrib/osx/TorbuttonInfo.plist  	\
-  -d contrib/osx/TorbuttonDesc.plist
-
 ### Assemble the metapackage.  Packagemaker won't buld metapackages from
 # the command line, so we need to do it by hand.
 
@@ -180,19 +141,14 @@
 cp contrib/osx/TorBundleDesc.plist "$MPKG/Contents/Resources/Description.plist"
 cp contrib/osx/tor_logo.gif "$MPKG/Contents/Resources/background.gif"
 
-# Move all the subpackages into place.  unzip Privoxy.pkg into place,
-# and fix its file permissions so we can rm -rf it later.
+# Move all the subpackages into place.  
 mkdir $BUILD_DIR/output/.contained_packages
 mv $BUILD_DIR/output/*.pkg $BUILD_DIR/OUTPUT/.contained_packages
-( cd $BUILD_DIR/output/.contained_packages && unzip $PRIVOXY_PKG_ZIP && find Privoxy.pkg -type d -print0 | xargs -0 chmod u+w )
+( cd $BUILD_DIR/output/.contained_packages )
 
 ### Copy readmes and licenses into toplevel.
-PRIVOXY_RESDIR=$BUILD_DIR/output/.contained_packages/Privoxy.pkg/Contents/Resources
-cp $PRIVOXY_RESDIR/License.html $BUILD_DIR/output/Privoxy\ License.html
-cp $PRIVOXY_RESDIR/ReadMe.txt $BUILD_DIR/output/Privoxy\ ReadMe.txt
 cp contrib/osx/ReadMe.rtf $BUILD_DIR/output/Tor\ ReadMe.rtf
 cp LICENSE $BUILD_DIR/output/Tor\ License.txt
-cp $TORBUTTON_LIC_PATH $BUILD_DIR/output/Torbutton_LICENSE.txt
 
 ### Package it all into a DMG
 

Modified: tor/trunk/contrib/osx/package_list.txt
===================================================================
--- tor/trunk/contrib/osx/package_list.txt	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/package_list.txt	2008-06-15 12:51:51 UTC (rev 15272)
@@ -1,6 +1,2 @@
 Tor
-Privoxy
 torstartup
-privoxyconf
-Vidalia
-torbutton

Deleted: tor/trunk/contrib/osx/privoxy.config
===================================================================
--- tor/trunk/contrib/osx/privoxy.config	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/contrib/osx/privoxy.config	2008-06-15 12:51:51 UTC (rev 15272)
@@ -1,1179 +0,0 @@
-#        Sample Configuration File for Privoxy v3.0.6
-#
-#  $Id$
-#
-#  Copyright (C) 2001-2006 Privoxy Developers http://privoxy.org
-#
-####################################################################
-#                                                                  #
-#                      Table of Contents                           #
-#                                                                  #
-#        I. INTRODUCTION                                           #
-#       II. FORMAT OF THE CONFIGURATION FILE                       #
-#                                                                  #
-#        1. LOCAL SET-UP DOCUMENTATION                             #
-#        2. CONFIGURATION AND LOG FILE LOCATIONS                   #
-#        3. DEBUGGING                                              #
-#        4. ACCESS CONTROL AND SECURITY                            #
-#        5. FORWARDING                                             #
-#        6. WINDOWS GUI OPTIONS                                    #
-#                                                                  #
-####################################################################
-#
-#
-#  I. INTRODUCTION
-#   ===============
-#
-#  This file holds the Privoxy configuration. If you modify this file,
-#  you will need to send a couple of requests (of any kind) to the
-#  proxy before any changes take effect.
-#
-#  When starting Privoxy on Unix systems, give the name of this file as
-#  an argument. On Windows systems, Privoxy will look for this file
-#  with the name 'config.txt' in the same directory where Privoxy
-#  is installed.
-#
-#
-#  II. FORMAT OF THE CONFIGURATION FILE
-#  ====================================
-#
-#  Configuration lines consist of an initial keyword followed by a
-#  list of values, all separated by whitespace (any number of spaces
-#  or tabs). For example,
-#
-#  actionsfile default.action
-#
-#  Indicates that the actionsfile is named 'default.action'.
-#
-#  The '#' indicates a comment. Any part of a line following a '#'
-#  is ignored, except if the '#' is preceded by a '\'.
-#
-#  Thus, by placing a # at the start of an existing configuration line,
-#  you can make it a comment and it will be treated as if it weren't
-#  there. This is called "commenting out" an option and can be useful.
-#
-#  Note that commenting out and option and leaving it at its default
-#  are two completely different things! Most options behave very
-#  differently when unset.  See the the "Effect if unset" explanation
-#  in each option's description for details.
-#
-#  Long lines can be continued on the next line by using a `\' as the
-#  last character.
-#
-
-#
-#  1. LOCAL SET-UP DOCUMENTATION
-#  =============================
-#
-#  If you intend to operate Privoxy for more users than just yourself,
-#  it might be a good idea to let them know how to reach you, what
-#  you block and why you do that, your policies, etc.
-#
-
-#
-#  1.1. user-manual
-#  ================
-#
-#  Specifies:
-#
-#      Location of the Privoxy User Manual.
-#
-#  Type of value:
-#
-#      A fully qualified URI
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      http://www.privoxy.org/version/user-manual/ will be used,
-#      where version is the Privoxy version.
-#
-#  Notes:
-#
-#      The User Manual URI is the single best source of information on
-#      Privoxy, and is used for help links from some of the internal
-#      CGI pages. The manual itself is normally packaged with the
-#      binary distributions, so you probably want to set this to
-#      a locally installed copy. For multi-user setups, you could
-#      provide a copy on a local webserver for all your users and use
-#      the corresponding URL here.
-#
-#      Examples:
-#
-#      The best all purpose solution is simply to put the full local
-#      PATH to where the User Manual is located:
-#
-#        user-manual  /usr/share/doc/privoxy/user-manual
-#
-#      The User Manual is then available to anyone with
-#      access to the proxy, by following the built-in URL:
-#      http://config.privoxy.org/user-manual/ (or the shortcut:
-#      http://p.p/user-manual/).
-#
-#      If the documentation is not on the local system, it can be
-#      accessed from a remote server, as:
-#
-#        user-manual  http://example.com/privoxy/user-manual/
-#
-#      WARNING!!!
-#
-#          If set, this option should be the first option in the config
-#          file, because it is used while the config file is being read.
-#
-#user-manual http://www.privoxy.org/user-manual/
-
-#
-#  1.2. trust-info-url
-#  ===================
-#
-#  Specifies:
-#
-#      A URL to be displayed in the error page that users will see if
-#      access to an untrusted page is denied.
-#
-#  Type of value:
-#
-#      URL
-#
-#  Default value:
-#
-#      Two example URL are provided
-#
-#  Effect if unset:
-#
-#      No links are displayed on the "untrusted" error page.
-#
-#  Notes:
-#
-#      The value of this option only matters if the experimental trust
-#      mechanism has been activated. (See trustfile above.)
-#
-#      If you use the trust mechanism, it is a good idea to write
-#      up some on-line documentation about your trust policy and to
-#      specify the URL(s) here. Use multiple times for multiple URLs.
-#
-#      The URL(s) should be added to the trustfile as well, so users
-#      don't end up locked out from the information on why they were
-#      locked out in the first place!
-#
-trust-info-url  http://www.example.com/why_we_block.html
-trust-info-url  http://www.example.com/what_we_allow.html
-
-#
-#  1.3. admin-address
-#  ==================
-#
-#  Specifies:
-#
-#      An email address to reach the proxy administrator.
-#
-#  Type of value:
-#
-#      Email address
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No email address is displayed on error pages and the CGI user
-#      interface.
-#
-#  Notes:
-#
-#      If both admin-address and proxy-info-url are unset, the whole
-#      "Local Privoxy Support" box on all generated pages will not
-#      be shown.
-#
-#admin-address privoxy-admin@xxxxxxxxxxx
-
-#
-#  1.4. proxy-info-url
-#  ===================
-#
-#  Specifies:
-#
-#      A URL to documentation about the local Privoxy setup,
-#      configuration or policies.
-#
-#  Type of value:
-#
-#      URL
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      No link to local documentation is displayed on error pages and
-#      the CGI user interface.
-#
-#  Notes:
-#
-#      If both admin-address and proxy-info-url are unset, the whole
-#      "Local Privoxy Support" box on all generated pages will not
-#      be shown.
-#
-#      This URL shouldn't be blocked ;-)
-#
-#proxy-info-url http://www.example.com/proxy-service.html
-
-#
-#  2. CONFIGURATION AND LOG FILE LOCATIONS
-#  =======================================
-#
-#  Privoxy can (and normally does) use a number of other files for
-#  additional configuration, help and logging. This section of the
-#  configuration file tells Privoxy where to find those other files.
-#
-#  The user running Privoxy, must have read permission for all
-#  configuration files, and write permission to any files that would
-#  be modified, such as log files and actions files.
-#
-
-#
-#  2.1. confdir
-#  ============
-#
-#  Specifies:
-#
-#      The directory where the other configuration files are located
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      /etc/privoxy (Unix) or Privoxy installation dir (Windows)
-#
-#  Effect if unset:
-#
-#      Mandatory
-#
-#  Notes:
-#
-#      No trailing "/", please
-#
-#      When development goes modular and multi-user, the blocker,
-#      filter, and per-user config will be stored in subdirectories of
-#      "confdir". For now, the configuration directory structure is
-#      flat, except for confdir/templates, where the HTML templates
-#      for CGI output reside (e.g. Privoxy's 404 error page).
-#
-confdir .
-
-#
-#  2.2. logdir
-#  ===========
-#
-#  Specifies:
-#
-#      The directory where all logging takes place (i.e. where logfile
-#      and jarfile are located)
-#
-#  Type of value:
-#
-#      Path name
-#
-#  Default value:
-#
-#      /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
-#
-#  Effect if unset:
-#
-#      Mandatory
-#
-#  Notes:
-#
-#      No trailing "/", please
-#
-logdir .
-
-#
-#  2.3. actionsfile
-#  ================
-#
-#  Specifies:
-#
-#      The actions file(s) to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir, without the .action suffix
-#
-#  Default values:
-#
-#        standard     # Internal purposes, no editing recommended
-#
-#        default      # Main actions file
-#
-#        user         # User customizations
-#
-#  Effect if unset:
-#
-#      No actions are taken at all. Simple neutral proxying.
-#
-#  Notes:
-#
-#      Multiple actionsfile lines are permitted, and are in fact
-#      recommended!
-#
-#      The default values include standard.action, which is used
-#      for internal purposes and should be loaded, default.action,
-#      which is the "main" actions file maintained by the developers,
-#      and user.action, where you can make your personal additions.
-#
-#      Actions files are where all the per site and per URL
-#      configuration is done for ad blocking, cookie management,
-#      privacy considerations, etc. There is no point in using Privoxy
-#      without at least one actions file.
-#
-actionsfile standard  # Internal purpose, recommended
-actionsfile default   # Main actions file
-actionsfile user      # User customizations
-
-#
-#  2.4. filterfile
-#  ===============
-#
-#  Specifies:
-#
-#      The filter file(s) to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir
-#
-#  Default value:
-#
-#      default.filter (Unix) or default.filter.txt (Windows)
-#
-#  Effect if unset:
-#
-#      No textual content filtering takes place, i.e. all +filter{name}
-#      actions in the actions files are turned neutral.
-#
-#  Notes:
-#
-#      Multiple filterfile lines are permitted.
-#
-#      The filter files contain content modification rules that use
-#      regular expressions. These rules permit powerful changes on
-#      the content of Web pages, and optionally the headers as well,
-#      e.g., you could disable your favorite JavaScript annoyances,
-#      re-write the actual displayed text, or just have some fun
-#      playing buzzword bingo with web pages.
-#
-#      The +filter{name} actions rely on the relevant filter (name)
-#      to be defined in a filter file!
-#
-#      A pre-defined filter file called default.filter that contains a
-#      number of useful filters for common problems is included in the
-#      distribution. See the section on the filter action for a list.
-#
-#      It is recommended to place any locally adapted filters into a
-#      separate file, such as user.filter.
-#
-filterfile default.filter
-#filterfile user.filter      # User customizations
-
-#
-#  2.5. logfile
-#  ============
-#
-#  Specifies:
-#
-#      The log file to use
-#
-#  Type of value:
-#
-#      File name, relative to logdir
-#
-#  Default value:
-#
-#      logfile (Unix) or privoxy.log (Windows)
-#
-#  Effect if unset:
-#
-#      No log file is used, all log messages go to the console (STDERR).
-#
-#  Notes:
-#
-#      The logfile is where all logging and error messages are
-#      written. The level of detail and number of messages are set with
-#      the debug option (see below).  The logfile can be useful for
-#      tracking down a problem with Privoxy (e.g., it's not blocking
-#      an ad you think it should block) but in most cases you probably
-#      will never look at it.
-#
-#      Your logfile will grow indefinitely, and you will probably
-#      want to periodically remove it. On Unix systems, you can do
-#      this with a cron job (see "man cron"). For Red Hat, a logrotate
-#      script has been included.
-#
-#      On SuSE Linux systems, you can place a line like
-#      "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
-#      with the effect that cron.daily will automatically archive,
-#      gzip, and empty the log, when it exceeds 1M size.
-#
-#      Any log files must be writable by whatever user Privoxy is
-#      being run as (default on UNIX, user id is "privoxy").
-#
-#logfile privoxy.log
-
-#
-#  2.6. jarfile
-#  ============
-#
-#  Specifies:
-#
-#      The file to store intercepted cookies in
-#
-#  Type of value:
-#
-#      File name, relative to logdir
-#
-#  Default value:
-#
-#      Unset (commented out). When activated: jarfile (Unix) or
-#      privoxy.jar (Windows)
-#
-#  Effect if unset:
-#
-#      Intercepted cookies are not stored in a dedicated log file.
-#
-#  Notes:
-#
-#      The jarfile may grow to ridiculous sizes over time.
-#
-#      If debug 8 (show header parsing) is enabled, cookies are written
-#      to the logfile with the rest of the headers.
-#
-#jarfile jar.log
-
-#
-#  2.7. trustfile
-#  ==============
-#
-#  Specifies:
-#
-#      The trust file to use
-#
-#  Type of value:
-#
-#      File name, relative to confdir
-#
-#  Default value:
-#
-#      Unset (commented out). When activated: trust (Unix) or trust.txt
-#      (Windows)
-#
-#  Effect if unset:
-#
-#      The entire trust mechanism is turned off.
-#
-#  Notes:
-#
-#      The trust mechanism is an experimental feature for building
-#      white-lists and should be used with care. It is NOT recommended
-#      for the casual user.
-#
-#      If you specify a trust file, Privoxy will only allow access to
-#      sites that are specified in the trustfile. Sites can be listed
-#      in one of two ways:
-#
-#      Prepending a ~ character limits access to this site only (and
-#      any sub-paths within this site), e.g. ~www.example.com.
-#
-#      Or, you can designate sites as trusted referrers, by prepending
-#      the name with a + character. The effect is that access to
-#      untrusted sites will be granted -- but only if a link from this
-#      trusted referrer was used. The link target will then be added
-#      to the "trustfile" so that future, direct accesses will be
-#      granted. Sites added via this mechanism do not become trusted
-#      referrers themselves (i.e. they are added with a ~ designation).
-#
-#      If you use the + operator in the trust file, it may grow
-#      considerably over time.
-#
-#      It is recommended that Privoxy be compiled with the
-#      --disable-force, --disable-toggle and --disable-editor options,
-#      if this feature is to be used.
-#
-#      Possible applications include limiting Internet access for
-#      children.
-#
-#trustfile trust
-
-#
-#  3. DEBUGGING
-#  ============
-#
-#  These options are mainly useful when tracing a problem. Note that
-#  you might also want to invoke Privoxy with the --no-daemon command
-#  line option when debugging.
-#
-
-#
-#  3.1. debug
-#  ==========
-#
-#  Specifies:
-#
-#      Key values that determine what information gets logged to
-#      the logfile.
-#
-#  Type of value:
-#
-#      Integer values
-#
-#  Default value:
-#
-#      12289 (i.e.: URLs plus informational and warning messages)
-#
-#  Effect if unset:
-#
-#      Nothing gets logged.
-#
-#  Notes:
-#
-#      The available debug levels are:
-#  
-#          debug         1 # show each GET/POST/CONNECT request 
-#          debug         2 # show each connection status 
-#          debug         4 # show I/O status 
-#          debug         8 # show header parsing 
-#          debug        16 # log all data into the logfile 
-#          debug        32 # debug force feature 
-#          debug        64 # debug regular expression filter
-#          debug       128 # debug fast redirects 
-#          debug       256 # debug GIF de-animation 
-#          debug       512 # Common Log Format
-#          debug      1024 # debug kill pop-ups 
-#          debug      2048 # CGI user interface 
-#          debug      4096 # Startup banner and warnings.
-#          debug      8192 # Non-fatal errors
-#
-#      To select multiple debug levels, you can either add them or
-#      use multiple debug lines.
-#
-#      A debug level of 1 is informative because it will show you each
-#      request as it happens. 1, 4096 and 8192 are highly recommended
-#      so that you will notice when things go wrong. The other levels
-#      are probably only of interest if you are hunting down a specific
-#      problem. They can produce a hell of an output (especially 16).
-#
-#      The reporting of fatal errors (i.e. ones which crash Privoxy)
-#      is always on and cannot be disabled.
-#
-#      If you want to use CLF (Common Log Format), you should set
-#      "debug 512" ONLY and not enable anything else.
-#
-#debug   1    # show each GET/POST/CONNECT request
-debug   4096 # Startup banner and warnings
-debug   8192 # Errors - *we highly recommended enabling this*
-
-#
-#  3.2. single-threaded
-#  ====================
-#
-#  Specifies:
-#
-#      Whether to run only one server thread
-#
-#  Type of value:
-#
-#      None
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Multi-threaded (or, where unavailable: forked) operation,
-#      i.e. the ability to serve multiple requests simultaneously.
-#
-#  Notes:
-#
-#      This option is only there for debug purposes and you should
-#      never need to use it. It will drastically reduce performance.
-#
-#single-threaded
-
-#
-#  4. ACCESS CONTROL AND SECURITY
-#  ==============================
-#
-#  This section of the config file controls the security-relevant
-#  aspects of Privoxy's configuration.
-#
-
-#
-#  4.1. listen-address
-#  ===================
-#
-#  Specifies:
-#
-#      The IP address and TCP port on which Privoxy will listen for
-#      client requests.
-#
-#  Type of value:
-#
-#      [IP-Address]:Port
-#
-#  Default value:
-#
-#      127.0.0.1:8118
-#
-#  Effect if unset:
-#
-#      Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
-#      recommended for home users who run Privoxy on the same machine
-#      as their browser.
-#
-#  Notes:
-#
-#      You will need to configure your browser(s) to this proxy address
-#      and port.
-#
-#      If you already have another service running on port 8118, or
-#      if you want to serve requests from other machines (e.g. on your
-#      local network) as well, you will need to override the default.
-#
-#      If you leave out the IP address, Privoxy will bind to all
-#      interfaces (addresses) on your machine and may become reachable
-#      from the Internet. In that case, consider using access control
-#      lists (ACL's, see below), and/or a firewall.
-#
-#      If you open Privoxy to untrusted users, you will also want
-#      to turn off the enable-edit-actions and enable-remote-toggle
-#      options!
-#
-#  Example:
-#
-#      Suppose you are running Privoxy on a machine which has the
-#      address 192.168.0.1 on your local private network (192.168.0.0)
-#      and has another outside connection with a different address. You
-#      want it to serve requests from inside only:
-#
-#        listen-address  192.168.0.1:8118
-#
-listen-address  127.0.0.1:8118
-
-#
-#  4.2. toggle
-#  ===========
-#
-#  Specifies:
-#
-#      Initial state of "toggle" status
-#
-#  Type of value:
-#
-#      1 or 0
-#
-#  Default value:
-#
-#      1
-#
-#  Effect if unset:
-#
-#      Act as if toggled on
-#
-#  Notes:
-#
-#      If set to 0, Privoxy will start in "toggled off" mode,
-#      i.e. behave like a normal, content-neutral proxy where all ad
-#      blocking, filtering, etc are disabled. See enable-remote-toggle
-#      below. This is not really useful anymore, since toggling is
-#      much easier via the web interface than via editing the conf file.
-#
-#      The windows version will only display the toggle icon in the
-#      system tray if this option is present.
-#
-toggle  1
-
-#
-#  4.3. enable-remote-toggle
-#  =========================
-#
-#  Specifies:
-#
-#      Whether or not the web-based toggle feature may be used
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      1
-#
-#  Effect if unset:
-#
-#      The web-based toggle feature is disabled.
-#
-#  Notes:
-#
-#      When toggled off, Privoxy acts like a normal, content-neutral
-#      proxy, i.e.  it acts as if none of the actions applied to
-#      any URL.
-#
-#      For the time being, access to the toggle feature can not be
-#      controlled separately by "ACLs" or HTTP authentication, so that
-#      everybody who can access Privoxy (see "ACLs" and listen-address
-#      above) can toggle it for all users. So this option is not
-#      recommended for multi-user environments with untrusted users.
-#
-#      Note that you must have compiled Privoxy with support for this
-#      feature, otherwise this option has no effect.
-#
-enable-remote-toggle 0 
-
-#
-#  4.4. enable-remote-http-toggle
-#  ==============================
-#
-#  Specifies:
-#
-#      Whether or not Privoxy recognizes special HTTP headers to change
-#      its behaviour.
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      1
-#
-#  Effect if unset:
-#
-#      Privoxy ignores special HTTP headers.
-#
-#  Notes:
-#
-#      When toggled on, the client can change Privoxy's behaviour by
-#      setting special HTTP headers. Currently the only supported
-#      special header is "X-Filter: No", to disable filtering for
-#      the ongoing request, even if it is enabled in one of the
-#      action files.
-#
-#      If you are using Privoxy in a multi-user environment or with
-#      untrustworthy clients and want to enforce filtering, you will
-#      have to disable this option, otherwise you can ignore it.
-#
-enable-remote-http-toggle 0 
-
-#
-#  4.5. enable-edit-actions
-#  ========================
-#
-#  Specifies:
-#
-#      Whether or not the web-based actions file editor may be used
-#
-#  Type of value:
-#
-#      0 or 1
-#
-#  Default value:
-#
-#      1
-#
-#  Effect if unset:
-#
-#      The web-based actions file editor is disabled.
-#
-#  Notes:
-#
-#      For the time being, access to the editor can not be controlled
-#      separately by "ACLs" or HTTP authentication, so that everybody
-#      who can access Privoxy (see "ACLs" and listen-address above)
-#      can modify its configuration for all users. So this option is
-#      not recommended for multi-user environments with untrusted users.
-#
-#      Note that you must have compiled Privoxy with support for this
-#      feature, otherwise this option has no effect.
-#
-enable-edit-actions 0
-
-#
-#  4.6. ACLs: permit-access and deny-access
-#  ========================================
-#
-#  Specifies:
-#
-#      Who can access what.
-#
-#  Type of value:
-#
-#      src_addr[/src_masklen] [dst_addr[/dst_masklen]]
-#
-#      Where src_addr and dst_addr are IP addresses in dotted decimal
-#      notation or valid DNS names, and src_masklen and dst_masklen are
-#      subnet masks in CIDR notation, i.e. integer values from 2 to 30
-#      representing the length (in bits) of the network address. The
-#      masks and the whole destination part are optional.
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't restrict access further than implied by listen-address
-#
-#  Notes:
-#
-#      Access controls are included at the request of ISPs and systems
-#      administrators, and are not usually needed by individual
-#      users. For a typical home user, it will normally suffice to
-#      ensure that Privoxy only listens on the localhost (127.0.0.1)
-#      or internal (home) network address by means of the listen-address
-#      option.
-#
-#      Please see the warnings in the FAQ that this proxy is not
-#      intended to be a substitute for a firewall or to encourage
-#      anyone to defer addressing basic security weaknesses.
-#
-#      Multiple ACL lines are OK. If any ACLs are specified, then
-#      the Privoxy talks only to IP addresses that match at least one
-#      permit-access line and don't match any subsequent deny-access
-#      line. In other words, the last match wins, with the default
-#      being deny-access.
-#
-#      If Privoxy is using a forwarder (see forward below) for a
-#      particular destination URL, the dst_addr that is examined is
-#      the address of the forwarder and NOT the address of the ultimate
-#      target. This is necessary because it may be impossible for the
-#      local Privoxy to determine the IP address of the ultimate target
-#      (that's often what gateways are used for).
-#
-#      You should prefer using IP addresses over DNS names, because
-#      the address lookups take time. All DNS names must resolve! You
-#      can not use domain patterns like "*.org" or partial domain
-#      names. If a DNS name resolves to multiple IP addresses, only
-#      the first one is used.
-#
-#      Denying access to particular sites by ACL may have undesired
-#      side effects if the site in question is hosted on a machine
-#      which also hosts other sites.
-#
-#  Examples:
-#
-#      Explicitly define the default behavior if no ACL and
-#      listen-address are set: "localhost" is OK. The absence of a
-#      dst_addr implies that all destination addresses are OK:
-#
-#        permit-access  localhost
-#
-#      Allow any host on the same class C subnet as www.privoxy.org
-#      access to nothing but www.example.com:
-#
-#        permit-access  www.privoxy.org/24   www.example.com/32
-#
-#      Allow access from any host on the 26-bit subnet 192.168.45.64
-#      to anywhere, with the exception that 192.168.45.73 may not
-#      access www.dirty-stuff.example.com:
-#
-#        permit-access  192.168.45.64/26 
-#        deny-access    192.168.45.73     www.dirty-stuff.example.com
-#
-
-#
-#  4.7. buffer-limit
-#  =================
-#
-#  Specifies:
-#
-#      Maximum size of the buffer for content filtering.
-#
-#  Type of value:
-#
-#      Size in Kbytes
-#
-#  Default value:
-#
-#      4096
-#
-#  Effect if unset:
-#
-#      Use a 4MB (4096 KB) limit.
-#
-#  Notes:
-#
-#      For content filtering, i.e. the +filter and +deanimate-gif
-#      actions, it is necessary that Privoxy buffers the entire document
-#      body. This can be potentially dangerous, since a server could
-#      just keep sending data indefinitely and wait for your RAM to
-#      exhaust -- with nasty consequences.  Hence this option.
-#
-#      When a document buffer size reaches the buffer-limit, it is
-#      flushed to the client unfiltered and no further attempt to filter
-#      the rest of the document is made. Remember that there may be
-#      multiple threads running, which might require up to buffer-limit
-#      Kbytes each, unless you have enabled "single-threaded" above.
-#
-buffer-limit 4096
-
-#
-#  5. FORWARDING
-#  =============
-#
-#  This feature allows routing of HTTP requests through a chain
-#  of multiple proxies. It can be used to better protect privacy
-#  and confidentiality when accessing specific domains by routing
-#  requests to those domains through an anonymous public proxy.
-#  Or to use a caching proxy to speed up browsing. Or chaining to 
-#  a parent proxy may be necessary because the machine that Privoxy 
-#  runs on has no direct Internet access.
-#
-#  Also specified here are SOCKS proxies. Privoxy supports the SOCKS
-#  4 and SOCKS 4A protocols.
-#
-
-#
-#  5.1. forward
-#  ============
-#
-#  Specifies:
-#
-#      To which parent HTTP proxy specific requests should be routed.
-#
-#  Type of value:
-#
-#      target_pattern http_parent[:port]
-#
-#      where target_pattern is a URL pattern that specifies to which
-#      requests (i.e. URLs) this forward rule shall apply. Use /
-#      to denote "all URLs".  http_parent[:port] is the DNS name or
-#      IP address of the parent HTTP proxy through which the requests
-#      should be forwarded, optionally followed by its listening port
-#      (default: 8080). Use a single dot (.) to denote "no forwarding".
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't use parent HTTP proxies.
-#
-#  Notes:
-#
-#      If http_parent is ".", then requests are not forwarded to
-#      another HTTP proxy but are made directly to the web servers.
-#
-#      Multiple lines are OK, they are checked in sequence, and the
-#      last match wins.
-#
-#  Examples:
-#
-#      Everything goes to an example anonymizing proxy, except SSL on
-#      port 443 (which it doesn't handle):
-#
-#        forward   /      anon-proxy.example.org:8080 
-#        forward   :443   .
-#
-#      Everything goes to our example ISP's caching proxy, except for
-#      requests to that ISP's sites:
-#
-#        forward   /                  caching-proxy.example-isp.net:8000
-#        forward   .example-isp.net   .
-#
-
-#
-#  5.2. forward-socks4 and forward-socks4a
-#  =======================================
-#
-#  Specifies:
-#
-#      Through which SOCKS proxy (and to which parent HTTP proxy)
-#      specific requests should be routed.
-#
-#  Type of value:
-#
-#      target_pattern socks_proxy[:port] http_parent[:port]
-#
-#      where target_pattern is a URL pattern that specifies to which
-#      requests (i.e. URLs) this forward rule shall apply. Use / to
-#      denote "all URLs".  http_parent and socks_proxy are IP addresses
-#      in dotted decimal notation or valid DNS names (http_parent may
-#      be "." to denote "no HTTP forwarding"), and the optional port
-#      parameters are TCP ports, i.e. integer values from 1 to 64535
-#
-#  Default value:
-#
-#      Unset
-#
-#  Effect if unset:
-#
-#      Don't use SOCKS proxies.
-#
-#  Notes:
-#
-#      Multiple lines are OK, they are checked in sequence, and the
-#      last match wins.
-#
-#      The difference between forward-socks4 and forward-socks4a
-#      is that in the SOCKS 4A protocol, the DNS resolution of the
-#      target hostname happens on the SOCKS server, while in SOCKS 4
-#      it happens locally.
-#
-#      If http_parent is ".", then requests are not forwarded to another
-#      HTTP proxy but are made (HTTP-wise) directly to the web servers,
-#      albeit through a SOCKS proxy.
-#
-#  Examples:
-#
-#      From the company example.com, direct connections are made to all
-#      "internal" domains, but everything outbound goes through their
-#      ISP's proxy by way of example.com's corporate SOCKS 4A gateway
-#      to the Internet.
-#
-#        forward-socks4a   /              socks-gw.example.com:1080   www-cache.example-isp.net:8080 
-#        forward           .example.com   .
-#  
-#      A rule that uses a SOCKS 4 gateway for all destinations but no
-#      HTTP parent looks like this:
-#  
-#        forward-socks4   /               socks-gw.example.com:1080  .
-#
-#      To chain Privoxy and Tor, both running on the same system,
-#      you should use the rule:
-#  
-forward-socks4a / 127.0.0.1:9050 .
-
-#
-#      The public Tor network can't be used to reach your local network,
-#      therefore it's a good idea to make some exceptions:
-#
-#        forward         192.168.*.*/     .
-#        forward            10.*.*.*/     .
-#        forward           127.*.*.*/     .
-#
-#      Unencrypted connections to systems in these address ranges will
-#      be as (un)secure as the local network is, but the alternative is
-#      that you can't reach the network at all.
-#
-#      If you also want to be able to reach servers in your local
-#      network by using their names, you will need additional
-#      exceptions that look like this:
-#
-#        forward           localhost/     .
-#
-
-#
-#  5.3. forwarded-connect-retries
-#  ==============================
-#
-#  Specifies:
-#
-#      How often Privoxy retries if a forwarded connection request
-#      fails.
-#
-#  Type of value:
-#
-#      Number of retries.
-#
-#  Default value:
-#
-#      0
-#
-#  Effect if unset:
-#
-#      Forwarded connections are treated like direct connections and
-#      no retry attempts are made.
-#
-#  Notes:
-#
-#      forwarded-connect-retries is mainly interesting for socks4a
-#      connections, where Privoxy can't detect why the connections
-#      failed. The connection might have failed because of a DNS timeout
-#      in which case a retry makes sense, but it might also have failed
-#      because the server doesn't exist or isn't reachable. In this
-#      case the retry will just delay the appearance of Privoxy's
-#      error message.
-#
-#      Only use this option, if you are getting many forwarding related
-#      error messages, that go away when you try again manually. Start
-#      with a small value and check Privoxy's logfile from time to time,
-#      to see how many retries are usually needed.
-#
-#  Examples:
-#
-#      forwarded-connect-retries 1
-#
-forwarded-connect-retries  0
-
-#
-#  6. WINDOWS GUI OPTIONS
-#  ======================
-#
-#  Privoxy has a number of options specific to the Windows GUI
-#  interface:
-#
-
-#  If "activity-animation" is set to 1, the Privoxy icon will animate
-#  when "Privoxy" is active. To turn off, set to 0.
-#
-#activity-animation   1
-
-#  If "log-messages" is set to 1, Privoxy will log messages to the
-#  console window:
-#
-log-messages   0
-
-#  If "log-buffer-size" is set to 1, the size of the log buffer,
-#  i.e. the amount of memory used for the log messages displayed in
-#  the console window, will be limited to "log-max-lines" (see below).
-#
-#  Warning: Setting this to 0 will result in the buffer to grow
-#  infinitely and eat up all your memory!
-#
-#log-buffer-size 1
-
-#  log-max-lines is the maximum number of lines held in the log
-#  buffer. See above.
-#
-#log-max-lines 200
-
-#  If "log-highlight-messages" is set to 1, Privoxy will highlight
-#  portions of the log messages with a bold-faced font:
-#
-#log-highlight-messages 1
-
-#  The font used in the console window:
-#
-#log-font-name Comic Sans MS
-
-#  Font size used in the console window:
-#
-#log-font-size 8
-
-#  "show-on-task-bar" controls whether or not Privoxy will appear as
-#  a button on the Task bar when minimized:
-#
-#show-on-task-bar 0
-
-#  If "close-button-minimizes" is set to 1, the Windows close button
-#  will minimize Privoxy instead of closing the program (close with
-#  the exit option on the File menu).
-#
-#close-button-minimizes 1
-
-#  The "hide-console" option is specific to the MS-Win console version
-#  of Privoxy.  If this option is used, Privoxy will disconnect from
-#  and hide the command console.
-#
-#hide-console
-
-#

Modified: tor/trunk/doc/tor-osx-dmg-creation.txt
===================================================================
--- tor/trunk/doc/tor-osx-dmg-creation.txt	2008-06-15 12:44:11 UTC (rev 15271)
+++ tor/trunk/doc/tor-osx-dmg-creation.txt	2008-06-15 12:51:51 UTC (rev 15272)
@@ -7,18 +7,13 @@
 Summary:
 1) Compile and install a static version of the latest release of
 libevent.
-2) Acquire privoxyosx_setup_3.0.6.zip.  
-http://downloads.sourceforge.net/ijbswa/privoxyosx_setup_3.0.6.zip?modtime=1164104652&big_mirror=0
-  Remember where you put this file.
-3) Acquire torbutton xpi and license file.
-4) Acquire and install your preferred version of tor. Extract.
-5) Update some variables in contrib/osx/package.sh
-6) "make dist-osx"
-7) You now have a dmg from which you can install Tor, Privoxy, and the
-Torbutton extension for Firefox.
+2) Acquire and install your preferred version of tor. Extract.
+3) Update some variables in contrib/osx/package.sh
+4) "make dist-osx"
+5) You now have a dmg from which you can install Tor.
 
 ## Universal Binaries for OSX PPC and X86
-## This method works in OSX 10.4 (Tiger) and 10.5 (Leopard) only.
+## This method works in OSX 10.4 (Tiger) and newer OSX versions.
 ## See far below if you don't care about cross compiling for PPC and X86.
 ## The single architecture process starts with "###"
 
@@ -50,31 +45,10 @@
 /usr/local/lib/libevent.a (for architecture i386):      current ar archive random library
 /usr/local/lib/libevent.a (for architecture ppc):       current ar archive
 
-## Acquiring privoxy
-
-6) Download osx privoxy source from
-http://downloads.sourceforge.net/ijbswa/privoxyosx_setup_3.0.6.zip?modtime=1164104652&big_mirror=0
-
-7) Place the privoxyosx_setup_3.0.6.zip in a location of your choice.
-Remember this location.
-
-8) Get your preferred version of Torbutton from https://torbutton.torproject.org.
-Place into a location of your choosing, remember this location.
-
-9) Get the torbutton LICENSE file from https://torbutton.torproject.org.
-Place into a location of your choosing, remember this location.
-
-10) Get your preferred version of the tor source from https://www.torproject.org/download.  
+6) Get your preferred version of the tor source from https://www.torproject.org/download.  
 Extract the tarball.
 
-11) Update three variables in contrib/osx/package.sh:
-PRIVOXY_PKG_ZIP=~/tmp/privoxyosx_setup_3.0.6.zip
-TORBUTTON_PATH=~/tmp/torbutton-1.1.14-alpha.xpi
-TORBUTTON_LIC_PATH=~/tmp/LICENSE
-
-Make sure the paths are correct.  The build will fail if they are not.
-
-12) In the top level, this means /path/to/tor/, not tor/contrib/osx,
+7) In the top level, this means /path/to/tor/, not tor/contrib/osx,
 do a configure with these parameters:
 CFLAGS="-O -g -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" \
 LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" \
@@ -93,12 +67,10 @@
 15) There should exist in the top-level directory a
 Tor-$VERSION-universal-$OS-Bundle.dmg
 
-16) Congrats.  You have a universal binary. You are now ready to install Tor,
-Privoxy, and the Torbutton extension for Firefox.
+16) Congrats.  You have a universal binary. You are now ready to install Tor.
 
-
 ### Single Architecture Binaries for PPC or X86, not both.
-### This method works in all versions of OSX 10.1 through 10.5
+### This method works in all versions of OSX 10.3 through 10.5
 
 ### Compiling libevent
 
@@ -115,37 +87,15 @@
 4) If you have previouslly installed libevent, go rm the old libevent.so*
 files so the linker doesn't get suckered into using them.
 
-### Acquiring privoxy
-
-1) Download osx privoxy source from
-http://downloads.sourceforge.net/ijbswa/privoxyosx_setup_3.0.6.zip?modtime=1164104652&big_mirror=0
-
-2) Place the privoxyosx_setup_3.0.6.zip in a location of your choice.
-Remember this location.
-
 ### Compiling Tor
 
-1) Get your preferred version of Torbutton from
-https://torbutton.torproject.org.  
-Place into a location of your choosing, remember this location.
-
-2) Get the torbutton LICENSE file from https://torbutton.torproject.org.  
-Place into a location of your choosing, remember this location.
-
-3) Get your preferred version of the tor source from https://www.torproject.org.  Extract the
+1) Get your preferred version of the tor source from https://www.torproject.org.  Extract the
 tarball.
 
-4) Update three variables in contrib/osx/package.sh:
-PRIVOXY_PKG_ZIP=~/tmp/privoxyosx_setup_3.0.6.zip
-TORBUTTON_PATH=~/tmp/torbutton-1.1.14-alpha.xpi
-TORBUTTON_LIC_PATH=~/tmp/LICENSE
-
-Make sure the paths are correct.  The build will fail if they are not.
-
-5) In the top level, this means /path/to/tor/, not tor/contrib/osx,
+2) In the top level, this means /path/to/tor/, not tor/contrib/osx,
 do a configure with these parameters:
      CONFDIR=/Library/Tor ./configure --prefix=/Library/Tor \
      --bindir=/Library/Tor --sysconfdir=/Library
 
-6) In same top level dir, do a "make dist-osx".  There now exists a
+3) In same top level dir, do a "make dist-osx".  There now exists a
 .dmg file in the same directory.  Install from this dmg.