[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[or-cvs] [tor/release-0.2.1 7/8] close idle tls conns early
Author: Roger Dingledine <arma@xxxxxxxxxxxxxx>
Date: Fri, 23 Apr 2010 20:23:00 -0400
Subject: close idle tls conns early
Commit: 67b38d506850768924b7a5d679d02842c595f858
---
changes/close_idle_conns_faster | 6 ++
src/or/main.c | 99 +++++++++++++++++++++------------------
2 files changed, 59 insertions(+), 46 deletions(-)
create mode 100644 changes/close_idle_conns_faster
diff --git a/changes/close_idle_conns_faster b/changes/close_idle_conns_faster
new file mode 100644
index 0000000..9eff607
--- /dev/null
+++ b/changes/close_idle_conns_faster
@@ -0,0 +1,6 @@
+ o Major bugfixes:
+ - Make relays more aggressive about closing TLS connections that
+ have no circuits on them. Tens of thousands of them were piling
+ up at the fast relays, causing the relays to run out of sockets
+ and memory. Bugfix on 0.2.0.22-rc (where clients started tunneling
+ their directory fetches over TLS).
diff --git a/src/or/main.c b/src/or/main.c
index 321fc5a..9052f7c 100644
--- a/src/or/main.c
+++ b/src/or/main.c
@@ -663,6 +663,15 @@ directory_info_has_arrived(time_t now, int from_cache)
consider_testing_reachability(1, 1);
}
+/** How long do we wait before killing OR connections with no circuits?
+ * In Tor versions up to 0.2.1.25 and 0.2.2.12-alpha, we waited 15 minutes
+ * before cancelling these connections, which caused fast relays to accrue
+ * many many idle connections. Hopefully 3 minutes is low enough that
+ * it kills most idle connections, without being so low that we cause
+ * clients to bounce on and off.
+ */
+#define IDLE_OR_CONN_TIMEOUT 180
+
/** Perform regular maintenance tasks for a single connection. This
* function gets run once per second per connection by run_scheduled_events.
*/
@@ -673,6 +682,8 @@ run_connection_housekeeping(int i, time_t now)
connection_t *conn = smartlist_get(connection_array, i);
or_options_t *options = get_options();
or_connection_t *or_conn;
+ int past_keepalive =
+ now >= conn->timestamp_lastwritten + options->KeepalivePeriod;
if (conn->outbuf && !buf_datalen(conn->outbuf) && conn->type == CONN_TYPE_OR)
TO_OR_CONN(conn)->timestamp_lastempty = now;
@@ -707,6 +718,9 @@ run_connection_housekeeping(int i, time_t now)
if (!connection_speaks_cells(conn))
return; /* we're all done here, the rest is just for OR conns */
+ /* If we haven't written to an OR connection for a while, then either nuke
+ the connection or send a keepalive, depending. */
+
or_conn = TO_OR_CONN(conn);
if (or_conn->is_bad_for_new_circs && !or_conn->n_circuits) {
@@ -721,52 +735,45 @@ run_connection_housekeeping(int i, time_t now)
"Tor gave up on the connection");
connection_mark_for_close(conn);
conn->hold_open_until_flushed = 1;
- return;
- }
-
- /* If we haven't written to an OR connection for a while, then either nuke
- the connection or send a keepalive, depending. */
- if (now >= conn->timestamp_lastwritten + options->KeepalivePeriod) {
- int maxCircuitlessPeriod = options->MaxCircuitDirtiness*3/2;
- if (!connection_state_is_open(conn)) {
- /* We never managed to actually get this connection open and happy. */
- log_info(LD_OR,"Expiring non-open OR connection to fd %d (%s:%d).",
- conn->s,conn->address, conn->port);
- connection_mark_for_close(conn);
- conn->hold_open_until_flushed = 1;
- } else if (we_are_hibernating() && !or_conn->n_circuits &&
- !buf_datalen(conn->outbuf)) {
- /* We're hibernating, there's no circuits, and nothing to flush.*/
- log_info(LD_OR,"Expiring non-used OR connection to fd %d (%s:%d) "
- "[Hibernating or exiting].",
- conn->s,conn->address, conn->port);
- connection_mark_for_close(conn);
- conn->hold_open_until_flushed = 1;
- } else if (!or_conn->n_circuits &&
- now >= or_conn->timestamp_last_added_nonpadding +
- maxCircuitlessPeriod) {
- log_info(LD_OR,"Expiring non-used OR connection to fd %d (%s:%d) "
- "[idle].", conn->s,conn->address, conn->port);
- connection_mark_for_close(conn);
- conn->hold_open_until_flushed = 1;
- } else if (
- now >= or_conn->timestamp_lastempty + options->KeepalivePeriod*10 &&
- now >= conn->timestamp_lastwritten + options->KeepalivePeriod*10) {
- log_fn(LOG_PROTOCOL_WARN,LD_PROTOCOL,
- "Expiring stuck OR connection to fd %d (%s:%d). (%d bytes to "
- "flush; %d seconds since last write)",
- conn->s, conn->address, conn->port,
- (int)buf_datalen(conn->outbuf),
- (int)(now-conn->timestamp_lastwritten));
- connection_mark_for_close(conn);
- } else if (!buf_datalen(conn->outbuf)) {
- /* either in clique mode, or we've got a circuit. send a padding cell. */
- log_fn(LOG_DEBUG,LD_OR,"Sending keepalive to (%s:%d)",
- conn->address, conn->port);
- memset(&cell,0,sizeof(cell_t));
- cell.command = CELL_PADDING;
- connection_or_write_cell_to_buf(&cell, or_conn);
- }
+ } else if (past_keepalive && !connection_state_is_open(conn)) {
+ /* We never managed to actually get this connection open and happy. */
+ log_info(LD_OR,"Expiring non-open OR connection to fd %d (%s:%d).",
+ conn->s,conn->address, conn->port);
+ connection_mark_for_close(conn);
+ conn->hold_open_until_flushed = 1;
+ } else if (we_are_hibernating() && !or_conn->n_circuits &&
+ !buf_datalen(conn->outbuf)) {
+ /* We're hibernating, there's no circuits, and nothing to flush.*/
+ log_info(LD_OR,"Expiring non-used OR connection to fd %d (%s:%d) "
+ "[Hibernating or exiting].",
+ conn->s,conn->address, conn->port);
+ connection_mark_for_close(conn);
+ conn->hold_open_until_flushed = 1;
+ } else if (!or_conn->n_circuits &&
+ now >= or_conn->timestamp_last_added_nonpadding +
+ IDLE_OR_CONN_TIMEOUT) {
+ log_info(LD_OR,"Expiring non-used OR connection to fd %d (%s:%d) "
+ "[idle %d].", conn->s,conn->address, conn->port,
+ (int)(now - or_conn->timestamp_last_added_nonpadding));
+ connection_mark_for_close(conn);
+ conn->hold_open_until_flushed = 1;
+ } else if (
+ now >= or_conn->timestamp_lastempty + options->KeepalivePeriod*10 &&
+ now >= conn->timestamp_lastwritten + options->KeepalivePeriod*10) {
+ log_fn(LOG_PROTOCOL_WARN,LD_PROTOCOL,
+ "Expiring stuck OR connection to fd %d (%s:%d). (%d bytes to "
+ "flush; %d seconds since last write)",
+ conn->s, conn->address, conn->port,
+ (int)buf_datalen(conn->outbuf),
+ (int)(now-conn->timestamp_lastwritten));
+ connection_mark_for_close(conn);
+ } else if (past_keepalive && !buf_datalen(conn->outbuf)) {
+ /* send a padding cell */
+ log_fn(LOG_DEBUG,LD_OR,"Sending keepalive to (%s:%d)",
+ conn->address, conn->port);
+ memset(&cell,0,sizeof(cell_t));
+ cell.command = CELL_PADDING;
+ connection_or_write_cell_to_buf(&cell, or_conn);
}
}
--
1.6.5