[tor-commits] [community/translations] update contents from master

[emmapeel@xxxxxxxxxxxxxx]

commit da604a721ad208342c4e10d7c5b3bf1830973acb
Author: emma peel <emma.peel@xxxxxxxxxx>
Date:   Wed May 19 15:15:38 2021 +0200

    update contents from master
---
 content/relay/setup/bridge/fedora/contents.lr | 28 +++++++++------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/content/relay/setup/bridge/fedora/contents.lr b/content/relay/setup/bridge/fedora/contents.lr
index 095bac2..11113ba 100644
--- a/content/relay/setup/bridge/fedora/contents.lr
+++ b/content/relay/setup/bridge/fedora/contents.lr
@@ -22,22 +22,10 @@ cost=100
 Then install tor and the dependencies.
 
 ```
-dnf install git golang tor policycoreutils-python-utils
+dnf install tor obfs4 policycoreutils-python-utils
 ```
 
-### 2. Build obfs4proxy and move it into place.
-
-```
-export GOPATH=`mktemp -d`
-go get gitlab.com/yawning/obfs4.git/obfs4proxy
-sudo cp $GOPATH/bin/obfs4proxy /usr/local/bin/
-```
-And tell selinux to allow Tor to use obfs4proxy:
-```
-/sbin/restorecon -v /usr/local/bin/obfs4proxy
-```
-
-### 3. Edit your Tor config file, usually located at `/etc/tor/torrc` and replace its content with:
+### 2. Edit your Tor config file, usually located at `/etc/tor/torrc` and replace its content with:
 
 ```
 RunAsDaemon 1
@@ -48,7 +36,7 @@ BridgeRelay 1
 # censors may be scanning the Internet for this port.
 ORPort TODO1
 
-ServerTransportPlugin obfs4 exec /usr/local/bin/obfs4proxy
+ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy
 
 # Replace "TODO2" with an obfs4 port of your choice.  This port must be
 # externally reachable and must be different from the one specified for ORPort.
@@ -71,9 +59,11 @@ Nickname PickANickname
 
  Don't forget to change the `ORPort`, `ServerTransportListenAddr`, `ContactInfo`, and `Nickname` options.
 
-* Note that both Tor's OR port and its obfs4 port must be reachable. If your bridge is behind a firewall or NAT, make sure to open both ports. You can use [our reachability test](https://bridges.torproject.org/scan/) to see if your obfs4 port is reachable from the Internet.
+* Note that both Tor's OR port and its obfs4 port must be reachable.
+  If your bridge is behind a firewall or NAT, make sure to open both ports.
+  You can use [our reachability test](https://bridges.torproject.org/scan/) to see if your obfs4 port is reachable from the Internet.
 
-### 4. Restart tor
+### 3. Restart tor
 
 ```
 sudo semanage port -a -t tor_port_t -p tcp [OR port set earlier, in TODO1]
@@ -81,7 +71,7 @@ sudo semanage port -a -t tor_port_t -p tcp [obfs4 port set earlier, in TODO2]
 systemctl restart tor
 ```
 
-### 5. Monitor your logs (usually in your syslog)
+### 4. Monitor your logs (usually in your syslog)
 
 To confirm your bridge is running with no issues, you should see something like this:
 
@@ -95,7 +85,7 @@ To confirm your bridge is running with no issues, you should see something like
 [notice] Self-testing indicates your ORPort is reachable from the outside. Excellent. Publishing server descriptor.
 ```
 
-### 6. Final notes
+### 5. Final notes
 
 If you are having trouble setting up your bridge, have a look at [our help section](https://community.torproject.org/relay/getting-help/).
 If your bridge is now running, check out the [post-install notes](https://community.torproject.org/relay/setup/bridge/post-install/).



_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits