[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[or-cvs] [tor/master 02/12] Remove the torrc.complete file.
Author: Sebastian Hahn <sebastian@xxxxxxxxxxxxxx>
Date: Fri, 29 Oct 2010 23:04:21 +0200
Subject: Remove the torrc.complete file.
Commit: 40fd0c1ca184c5f04e1d345585df0a059d3a86fe
We haven't been keeping it up to date, and the manpage exists as a
replacement for users who want an overview of all available options.
---
changes/torrc.complete | 4 +
contrib/checkOptionDocs.pl | 6 +-
src/config/torrc.complete.in | 534 ------------------------------------------
3 files changed, 5 insertions(+), 539 deletions(-)
create mode 100644 changes/torrc.complete
delete mode 100644 src/config/torrc.complete.in
diff --git a/changes/torrc.complete b/changes/torrc.complete
new file mode 100644
index 0000000..03d51c1
--- /dev/null
+++ b/changes/torrc.complete
@@ -0,0 +1,4 @@
+ o Code simplifications and refactorings:
+ - Remove the torrc.complete file. It hasn't been kept up to date
+ and users will have better luck checking out the manpage.
+
diff --git a/contrib/checkOptionDocs.pl b/contrib/checkOptionDocs.pl
index 425410d..23e57b4 100755
--- a/contrib/checkOptionDocs.pl
+++ b/contrib/checkOptionDocs.pl
@@ -4,7 +4,6 @@ use strict;
my %options = ();
my %descOptions = ();
my %torrcSampleOptions = ();
-my %torrcCompleteOptions = ();
my %manPageOptions = ();
# Load the canonical list as actually accepted by Tor.
@@ -20,7 +19,7 @@ while (<F>) {
}
close F;
-# Load the contents of torrc.sample and torrc.complete
+# Load the contents of torrc.sample
sub loadTorrc {
my ($fname, $options) = @_;
local *F;
@@ -36,7 +35,6 @@ sub loadTorrc {
}
loadTorrc("./src/config/torrc.sample.in", \%torrcSampleOptions);
-loadTorrc("./src/config/torrc.complete.in", \%torrcCompleteOptions);
# Try to figure out what's in the man page.
@@ -64,8 +62,6 @@ sub subtractHashes {
# subtractHashes("No online docs", \%options, \%descOptions);
# subtractHashes("Orphaned online docs", \%descOptions, \%options);
-subtractHashes("Not in torrc.complete.in", \%options, \%torrcCompleteOptions);
-subtractHashes("Orphaned in torrc.complete.in", \%torrcCompleteOptions, \%options);
subtractHashes("Orphaned in torrc.sample.in", \%torrcSampleOptions, \%options);
subtractHashes("Not in man page", \%options, \%manPageOptions);
diff --git a/src/config/torrc.complete.in b/src/config/torrc.complete.in
deleted file mode 100644
index 1a1eea1..0000000
--- a/src/config/torrc.complete.in
+++ /dev/null
@@ -1,534 +0,0 @@
-####################################################################
-## This config file is divided into four sections. They are:
-## 1. Global Options (clients and servers)
-## 2. Client Options Only
-## 3. Server Options Only
-## 4. Directory Server Options (for running your own Tor network)
-## 5. Hidden Service Options (clients and servers)
-##
-## The conventions used are:
-## double hash (##) is for summary text about the config option;
-## single hash (#) is for the config option; and,
-## the config option is always after the text.
-####################################################################
-
-
-## Section 1: Global Options (clients and servers)
-
-## A token bucket limits the average incoming bandwidth on this node
-## to the specified number of bytes per second. (Default: 2MB)
-#BandwidthRate N bytes|KB|MB|GB|TB
-
-## Limit the maximum token bucket size (also known as the burst) to
-## the given number of bytes. (Default: 5 MB)
-#BandwidthBurst N bytes|KB|MB|GB|TB
-
-## If set, we will not advertise more than this amount of bandwidth
-## for our BandwidthRate. Server operators who want to reduce the
-## number of clients who ask to build circuits through them (since
-## this is proportional to advertised bandwidth rate) can thus
-## reduce the CPU demands on their server without impacting
-## network performance.
-#MaxAdvertisedBandwidth N bytes|KB|MB|GB|TB
-
-## If set, Tor will accept connections from the same machine
-## (localhost only) on this port, and allow those connections to
-## control the Tor process using the Tor Control Protocol
-## (described in control-spec.txt). Note: unless you also specify
-## one of HashedControlPassword or CookieAuthentication, setting
-## this option will cause Tor to allow any process on the local
-## host to control it.
-#ControlPort Port
-
-## Donâ??t allow any connections on the control port except when the
-## other process knows the password whose one-way hash is
-## hashed_password. You can compute the hash of a password by
-## running "tor --hash-password password".
-#HashedControlPassword hashed_password
-
-## If this option is set to 1, donâ??t allow any connections on the
-## control port except when the connecting process knows the
-## contents of a file named "control_auth_cookie", which Tor will
-## create in its data directory. This authentication method
-## should only be used on systems with good filesystem security.
-## (Default: 0)
-#CookieAuthentication 0|1
-
-## Store working data in DIR (Default: /usr/local/var/lib/tor)
-#DataDirectory DIR
-
-## Every time the specified period elapses, Tor downloads a direc-
-## tory. A directory contains a signed list of all known servers
-## as well as their current liveness status. A value of "0 sec-
-## onds" tells Tor to choose an appropriate default.
-## (Default: 1 hour for clients, 20 minutes for servers)
-#DirFetchPeriod N seconds|minutes|hours|days|weeks
-
-## Tor only trusts directories signed with one of these keys, and
-## uses the given addresses to connect to the trusted directory
-## servers. If no DirServer lines are specified, Tor uses the built-in
-## defaults (moria1, moria2, tor26), so you can leave this alone unless
-## you need to change it.
-##
-## WARNING! Changing these options will make your Tor behave
-## differently from everyone else's, and hurt your anonymity. Even
-## uncommenting these lines is a bad idea. They are the defaults now,
-## but the defaults may change in the future, leaving you behind.
-##
-#DirServer moria1 v1 18.244.0.188:9031 FFCB 46DB 1339 DA84 674C 70D7 CB58 6434 C437 0441
-#DirServer moria2 v1 18.244.0.114:80 719B E45D E224 B607 C537 07D0 E214 3E2D 423E 74CF
-#DirServer tor26 v1 86.59.21.38:80 847B 1F85 0344 D787 6491 A548 92F9 0493 4E4E B85D
-
-## Attempt to lock current and future memory pages and effectively disable swap
-# DisableAllSwap 0|1
-
-## On startup, setgid to this user.
-#Group GID
-
-## Tor will make all its directory requests through this host:port
-## (or host:80 if port is not specified), rather than connecting
-## directly to any directory servers.
-#HttpProxy host[:port]
-
-## If defined, Tor will use this username:password for Basic Http
-## proxy authentication, as in RFC 2617. This is currently the
-## only form of Http proxy authentication that Tor supports; feel
-## free to submit a patch if you want it to support others.
-#HttpProxyAuthenticator username:password
-
-## Tor will make all its OR (SSL) connections through this
-## host:port (or host:443 if port is not specified), via HTTP CON-
-## NECT rather than connecting directly to servers. You may want
-## to set FascistFirewall to restrict the set of ports you might
-## try to connect to, if your Https proxy only allows connecting
-## to certain ports.
-#HttpsProxy host[:port]
-
-## If defined, Tor will use this username:password for Basic Https
-## proxy authentication, as in RFC 2617. This is currently the
-## only form of Https proxy authentication that Tor supports; feel
-## free to submit a patch if you want it to support others.
-#HttpsProxyAuthenticator username:password
-
-## To keep firewalls from expiring connections, send a padding
-## keepalive cell every NUM seconds on open connections that are
-## in use. If the connection has no open circuits, it will instead
-## be closed after NUM seconds of idleness. (Default: 5 minutes)
-#KeepalivePeriod NUM
-
-## Send all messages between minSeverity and maxSeverity to the
-## standard output stream, the standard error stream, or to the
-## system log. (The "syslog" value is only supported on Unix.)
-## Recognized severity levels are debug, info, notice, warn, and
-## err. If only one severity level is given, all messages of that
-## level or higher will be sent to the listed destination.
-#Log minSeverity[-maxSeverity] stderr|stdout|syslog
-
-## As above, but send log messages to the listed filename. The
-## "Log" option may appear more than once in a configuration file.
-## Messages are sent to all the logs that match their severity
-## level.
-#Log minSeverity[-maxSeverity] file FILENAME
-
-## Maximum number of simultaneous sockets allowed. You probably
-## donâ??t need to adjust this. (Default: 1024)
-#MaxConn NUM
-
-## Make all outbound connections originate from the IP address
-## specified. This is only useful when you have multiple network
-## interfaces, and you want all of Torâ??s outgoing connections to
-## use a single one.
-#OutboundBindAddress IP
-
-## On startup, write our PID to FILE. On clean shutdown, remove
-## FILE.
-#PIDFile FILE
-
-## If 1, Tor forks and daemonizes to the background. (Default: 0)
-#RunAsDaemon 0|1
-
-## If 1, Tor replaces potentially sensitive strings in the logs
-## (e.g. addresses) with the string [scrubbed]. This way logs can
-## still be useful, but they donâ??t leave behind personally identi-
-## fying information about what sites a user might have visited.
-## (Default: 1)
-#SafeLogging 0|1
-
-## Every time the specified period elapses, Tor downloads signed
-## status information about the current state of known servers. A
-## value of "0 seconds" tells Tor to choose an appropriate
-## default. (Default: 30 minutes for clients, 15 minutes for
-## servers)
-#StatusFetchPeriod N seconds|minutes|hours|days|weeks
-
-## On startup, setuid to this user.
-#User UID
-
-## If non-zero, try to use crypto hardware acceleration when
-## available. (Default: 1)
-#HardwareAccel 0|1
-
-
-## Section 2: Client Options Only
-
-## Where on our circuits should we allow Tor servers that the
-## directory servers havenâ??t authenticated as "verified"?
-## (Default: middle,rendezvous)
-#AllowUnverifiedNodes entry|exit|middle|introduction|rendezvous|...
-
-## If set to 1, Tor will under no circumstances run as a server.
-## The default is to run as a client unless ORPort is configured.
-## (Usually, you donâ??t need to set this; Tor is pretty smart at
-## figuring out whether you are reliable and high-bandwidth enough
-## to be a useful server.)
-## This option will likely be deprecated in the future; see the
-## NoPublish option below. (Default: 0)
-#ClientOnly 0|1
-
-## A list of preferred nodes to use for the first hop in the
-## circuit, if possible.
-#EntryNodes nickname,nickname,...
-
-## A list of preferred nodes to use for the last hop in the
-## circuit, if possible.
-#ExitNodes nickname,nickname,...
-
-## A list of nodes to never use when building a circuit.
-#ExcludeNodes nickname,nickname,...
-
-## If 1, Tor will never use any nodes besides those listed in
-## "exitnodes" for the last hop of a circuit.
-#StrictExitNodes 0|1
-
-## If 1, Tor will never use any nodes besides those listed in
-## "entrynodes" for the first hop of a circuit.
-#StrictEntryNodes 0|1
-
-## If 1, Tor will only create outgoing connections to ORs running
-## on ports that your firewall allows (defaults to 80 and 443; see
-## FirewallPorts). This will allow you to run Tor as a client
-## behind a firewall with restrictive policies, but will not allow
-## you to run as a server behind such a firewall.
-#FascistFirewall 0|1
-
-## A list of ports that your firewall allows you to connect to.
-## Only used when FascistFirewall is set. (Default: 80, 443)
-#FirewallPorts PORTS
-
-## A comma-separated list of IPs that your firewall allows you to
-## connect to. Only used when FascistFirewall is set. The format
-## is as for the addresses in ExitPolicy.
-## For example, â??FirewallIPs 99.0.0.0/8, *:80â?? means that your
-## firewall allows connections to everything inside net 99, and
-## to port 80 outside.
-#FirewallIPs ADDR[/MASK][:PORT]...
-
-## A list of ports for services that tend to have long-running
-## connections (e.g. chat and interactive shells). Circuits for
-## streams that use these ports will contain only high-uptime
-## nodes, to reduce the chance that a node will go down before the
-## stream is finished. (Default: 21, 22, 706, 1863, 5050, 5190,
-## 5222, 5223, 6667, 8300, 8888)
-#LongLivedPorts PORTS
-
-## When a request for address arrives to Tor, it will rewrite it
-## to newaddress before processing it. For example, if you always
-## want connections to www.indymedia.org to exit via torserver
-## (where torserver is the nickname of the server),
-## use "MapAddress www.indymedia.org www.indymedia.org.torserver.exit".
-#MapAddress address newaddress
-
-## Every NUM seconds consider whether to build a new circuit.
-## (Default: 30 seconds)
-#NewCircuitPeriod NUM
-
-## Feel free to reuse a circuit that was first used at most NUM
-## seconds ago, but never attach a new stream to a circuit that is
-## too old. (Default: 10 minutes)
-#MaxCircuitDirtiness NUM
-
-## The named Tor servers constitute a "family" of similar or co-
-## administered servers, so never use any two of them in the same
-## circuit. Defining a NodeFamily is only needed when a server
-## doesnâ??t list the family itself (with MyFamily). This option can
-## be used multiple times.
-#NodeFamily nickname,nickname,...
-
-## A list of preferred nodes to use for the rendezvous point, if
-## possible.
-#RendNodes nickname,nickname,...
-
-## A list of nodes to never use when choosing a rendezvous point.
-#RendExcludeNodes nickname,nickname,...
-
-## Advertise this port to listen for connections from SOCKS-speak-
-## ing applications. Set this to 0 if you donâ??t want to allow
-## application connections. (Default: 9050)
-#SOCKSPort PORT
-
-## Bind to this address to listen for connections from SOCKS-
-## speaking applications. (Default: 127.0.0.1) You can also spec-
-## ify a port (e.g. 192.168.0.1:9100). This directive can be spec-
-## ified multiple times to bind to multiple addresses/ports.
-#SOCKSBindAddress IP[:PORT]
-
-## Set an entrance policy for this server, to limit who can con-
-## nect to the SOCKS ports. The policies have the same form as
-## exit policies below.
-#SOCKSPolicy policy,policy,...
-
-## For each value in the comma separated list, Tor will track
-## recent connections to hosts that match this value and attempt
-## to reuse the same exit node for each. If the value is prepended
-## with a â??.â??, it is treated as matching an entire domain. If one
-## of the values is just a â??.â??, it means match everything. This
-## option is useful if you frequently connect to sites that will
-## expire all your authentication cookies (ie log you out) if your
-## IP address changes. Note that this option does have the disad-
-## vantage of making it more clear that a given history is associ-
-## ated with a single user. However, most people who would wish to
-## observe this will observe it through cookies or other protocol-
-## specific means anyhow.
-#TrackHostExits host,.domain,...
-
-## Since exit servers go up and down, it is desirable to expire
-## the association between host and exit server after NUM seconds.
-## The default is 1800 seconds (30 minutes).
-#TrackHostExitsExpire NUM
-
-## If this option is set to 1, we pick a few entry servers as our
-## "helpers", and try to use only those fixed entry servers. This
-## is desirable, because constantly changing servers increases the
-## odds that an adversary who owns some servers will observe a
-## fraction of your paths. (Defaults to 0; will eventually
-## default to 1.)
-#UseHelperNodes 0|1
-
-## If UseHelperNodes is set to 1, we will try to pick a total of
-## NUM helper nodes as entries for our circuits. (Defaults to 3.)
-#NumHelperNodes NUM
-
-
-## Section 3: Server Options Only
-
-## The IP or fqdn of this server (e.g. moria.mit.edu). You can
-## leave this unset, and Tor will guess your IP.
-#Address address
-
-## Administrative contact information for server.
-#ContactInfo email_address
-
-## Set an exit policy for this server. Each policy is of the form
-## "accept|reject ADDR[/MASK][:PORT]". If /MASK is omitted then
-## this policy just applies to the host given. Instead of giving
-## a host or network you can also use "*" to denote the universe
-## (0.0.0.0/0). PORT can be a single port number, an interval of
-## ports "FROM_PORT-TO_PORT", or "*". If PORT is omitted, that
-## means "*".
-##
-## For example, "reject 127.0.0.1:*,reject 192.168.1.0/24:*,accept
-## *:*" would reject any traffic destined for localhost and any
-## 192.168.1.* address, but accept anything else.
-##
-## This directive can be specified multiple times so you donâ??t
-## have to put it all on one line.
-##
-## See RFC 3330 for more details about internal and reserved IP
-## address space. Policies are considered first to last, and the
-## first match wins. If you want to _replace_ the default exit
-## policy, end your exit policy with either a reject *:* or an
-## accept *:*. Otherwise, youâ??re _augmenting_ (prepending to) the
-## default exit policy. The default exit policy is:
-## reject 0.0.0.0/8
-## reject 169.254.0.0/16
-## reject 127.0.0.0/8
-## reject 192.168.0.0/16
-## reject 10.0.0.0/8
-## reject 172.16.0.0/12
-## reject *:25
-## reject *:119
-## reject *:135-139
-## reject *:445
-## reject *:1214
-## reject *:4661-4666
-## reject *:6346-6429
-## reject *:6699
-## reject *:6881-6999
-## accept *:*
-#ExitPolicy policy,policy,...
-
-## If you have more than this number of onionskins queued for
-## decrypt, reject new ones. (Default: 100)
-#MaxOnionsPending NUM
-
-## Declare that this Tor server is controlled or administered by a
-## group or organization identical or similar to that of the other
-## named servers. When two servers both declare that they are in
-## the same â??familyâ??, Tor clients will not use them in the same
-## circuit. (Each server only needs to list the other servers in
-## its family; it doesnâ??t need to list itself, but it wonâ??t hurt.)
-#MyFamily nickname,nickname,...
-
-## Set the serverâ??s nickname to â??nameâ??.
-#Nickname name
-
-## If you set NoPublish 1, Tor will act as a server if you have an
-## ORPort defined, but it will not publish its descriptor to the
-## dirservers. This option is useful if you're testing out your
-## server, or if you're using alternate dirservers (e.g. for other
-## Tor networks such as Blossom). (Default: 0)
-#NoPublish 0|1
-
-## How many processes to use at once for decrypting onionskins.
-## (Default: 1)
-#NumCPUs num
-
-## Advertise this port to listen for connections from Tor clients
-## and servers.
-#ORPort PORT
-
-## Bind to this IP address to listen for connections from Tor
-## clients and servers. If you specify a port, bind to this port
-## rather than the one specified in ORPort. (Default: 0.0.0.0)
-#ORBindAddress IP[:PORT]
-
-## Whenever an outgoing connection tries to connect to one of a
-## given set of addresses, connect to target (an address:port
-## pair) instead. The address pattern is given in the same format
-## as for an exit policy. The address translation applies after
-## exit policies are applied. Multiple RedirectExit options can
-## be used: once any one has matched successfully, no subsequent
-## rules are considered. You can specify that no redirection is
-## to be performed on a given set of addresses by using the spe-
-## cial target string "pass", which prevents subsequent rules from
-## being considered.
-#RedirectExit pattern target
-
-## When we get a SIGINT and we're a server, we begin shutting
-## down: we close listeners and start refusing new circuits. After
-## NUM seconds, we exit. If we get a second SIGINT, we exit imme-
-## diately. (Default: 30 seconds)
-#ShutdownWaitLengthNUM
-
-## Every time the specified period elapses, Tor uploads its server
-## descriptors to the directory servers. This information is also
-## uploaded whenever it changes. (Default: 20 minutes)
-#DirPostPeriod N seconds|minutes|hours|days|weeks
-
-## A token bucket limits the average relayed bandwidth (server
-## traffic only, not client traffic) on this node to the specified
-## number of bytes per second.
-#RelayBandwidthRate N bytes|KB|MB|GB|TB
-
-## Limit the maximum token bucket size (also known as the burst) for
-## relayed traffic (server traffic only, not client traffic) to the
-## given number of bytes.
-#RelayBandwidthBurst N bytes|KB|MB|GB|TB
-
-## Never send more than the specified number of bytes in a given
-## accounting period, or receive more than that number in the
-## period. For example, with AccountingMax set to 1 GB, a server
-## could send 900 MB and receive 800 MB and continue running. It
-## will only hibernate once one of the two reaches 1 GB. When the
-## number of bytes is exhausted, Tor will hibernate until some
-## time in the next accounting period. To prevent all servers
-## from waking at the same time, Tor will also wait until a random
-## point in each period before waking up. If you have bandwidth
-## cost issues, enabling hibernation is preferable to setting a
-## low bandwidth, since it provides users with a collection of
-## fast servers that are up some of the time, which is more useful
-## than a set of slow servers that are always "available".
-#AccountingMax N bytes|KB|MB|GB|TB
-
-## Specify how long accounting periods last. If month is given,
-## each accounting period runs from the time HH:MM on the dayth
-## day of one month to the same day and time of the next. (The
-## day must be between 1 and 28.) If week is given, each account-
-## ing period runs from the time HH:MM of the dayth day of one
-## week to the same day and time of the next week, with Monday as
-## day 1 and Sunday as day 7. If day is given, each accounting
-## period runs from the time HH:MM each day to the same time on
-## the next day. All times are local, and given in 24-hour time.
-## (Defaults to "month 1 0:00".)
-#AccountingStart day|week|month [day] HH:MM
-
-
-## Section 4: Directory Server Options (for running your own Tor
-## network)
-
-## When this option is set to 1, Tor operates as an authoritative
-## directory server. Instead of caching the directory, it gener-
-## ates its own list of good servers, signs it, and sends that to
-## the clients. Unless the clients already have you listed as a
-## trusted directory, you probably do not want to set this option.
-## Please coordinate with the other admins at
-## tor-ops@xxxxxxxxxxxxx if you think you should be a directory.
-#AuthoritativeDirectory 0|1
-
-## Advertise the directory service on this port.
-#DirPort PORT
-
-## Bind the directory service to this address. If you specify a
-## port, bind to this port rather than the one specified in DirPort.
-## (Default: 0.0.0.0)
-#DirBindAddress IP[:PORT]
-
-## Set an entrance policy for this server, to limit who can con-
-## nect to the directory ports. The policies have the same form
-## as exit policies above.
-#DirPolicy policy,policy,...
-
-## STRING is a command-separated list of Tor versions currently
-## believed to be safe. The list is included in each directory,
-## and nodes which pull down the directory learn whether they need
-## to upgrade. This option can appear multiple times: the values
-## from multiple lines are spliced together.
-#RecommendedVersions STRING
-
-
-## If set to 1, Tor will accept router descriptors with arbitrary
-## "Address" elements. Otherwise, if the address is not an IP or
-## is a private IP, it will reject the router descriptor. Defaults
-## to 0.
-#DirAllowPrivateAddresses 0|1
-
-## If set to 1, Tor tries to build circuits through all of the
-## servers it knows about, so it can tell which are up and which
-## are down. This option is only useful for authoritative direc-
-## tories, so you probably don't want to use it.
-#RunTesting 0|1
-
-## Section 5: Hidden Service Options (clients and servers)
-
-## Store data files for a hidden service in DIRECTORY. Every hid-
-## den service must have a separate directory. You may use this
-## option multiple times to specify multiple services.
-#HiddenServiceDir DIRECTORY
-
-## Configure a virtual port VIRTPORT for a hidden service. You
-## may use this option multiple times; each time applies to the
-## service using the most recent hiddenservicedir. By default,
-## this option maps the virtual port to the same port on
-## 127.0.0.1. You may override the target port, address, or both
-## by specifying a target of addr, port, or addr:port.
-#HiddenServicePort VIRTPORT [TARGET]
-
-## If possible, use the specified nodes as introduction points for
-## the hidden service. If this is left unset, Tor will be smart
-## and pick some reasonable ones; most people can leave this unset.
-#HiddenServiceNodes nickname,nickname,...
-
-## Do not use the specified nodes as introduction points for the
-## hidden service. In normal use there is no reason to set this.
-#HiddenServiceExcludeNodes nickname,nickname,...
-
-## Publish the given rendezvous service descriptor versions for the
-## hidden service.
-#HiddenServiceVersion 0,2
-
-## Every time the specified period elapses, Tor uploads any ren-
-## dezvous service descriptors to the directory servers. This
-## information is also uploaded whenever it changes.
-## (Default: 1 hour)
-#RendPostPeriod N seconds|minutes|hours|days|weeks
-#
--
1.7.1