[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Proposal: Including Network Statistics in Extra-Info Documents
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Filename: XXX-statistics-extra-info-docs.txt
Title: Including Network Statistics in Extra-Info Documents
Author: Karsten Loesing
Created: 21-Jul-2009
Target: 0.2.2
Status: Open
Change history:
21-Jul-2009 Initial proposal for or-dev
Overview:
The Tor network has grown to almost two thousand relays and millions
of casual users over the past few years. With growth has come
increasing performance problems and attempts by some countries to
block access to the Tor network. In order to address these problems,
we need to learn more about the Tor network. This proposal suggests to
measure additional statistics and include them in extra-info documents
to help us understand the Tor network better.
Introduction:
As of May 2009, relays, bridges, and directories gather the following
data for statistical purposes:
- Relays and bridges count the number of bytes that they have pushed
in 15-minute intervals over the past 24 hours. Relays and bridges
include these data in extra-info documents that they send to the
directory authorities whenever they publish their server descriptor.
- Bridges further include a rough number of clients per country that
they have seen in the past 48 hours in their extra-info documents.
- Directories can be configured to count the number of clients they
see per country in the past 24 hours and to write them to a local
file.
Since then we extended the network statistics in Tor. These statistics
include:
- Directories now gather more precise statistics about connecting
clients. Fixes include measuring in intervals of exactly 24 hours,
counting unsuccessful requests, measuring download times, etc. The
directories append their statistics to a local file every 24 hours.
- Entry guards count the number of clients per country per day like
bridges do and write them to a local file every 24 hours.
- Relays measure statistics of the number of cells in their circuit
queues and how much time these cells spend waiting there. Relays
write these statistics to a local file every 24 hours.
- Exit nodes count the number of read and written bytes on exit
connections per port as well as the number of opened exit streams
per port in 24-hour intervals. Exit nodes write their statistics to
a local file.
The following four sections contain descriptions for adding these
statistics to the relays' extra-info documents.
Directory request statistics:
The first type of statistics aims at measuring directory requests sent
by clients to a directory mirror or directory authority. More
precisely, these statistics aim at requests for v2 and v3 network
statuses only. These directory requests are sent non-anonymously,
either via HTTP-like requests to a directory's Dir port or tunneled
over a 1-hop circuit.
Measuring directory request statistics is useful for several reasons:
First, the number of locally seen directory requests can be used to
estimate the total number of clients in the Tor network. Second, the
country-wise classification of requests using a GeoIP database can
help counting the relative and absolute number of users per country.
Third, the download times can give hints on the available bandwidth
capacity at clients.
Directory requests do not give any hints on the contents that clients
send or receive over the Tor network. Every client requests network
statuses from the directories, so that there are no anonymity-related
concerns to gather these statistics. It might be, though, that clients
wish to hide the fact that they are connecting to the Tor network.
Therefore, IP addresses are resolved to country codes in memory,
events are accumulated over 24 hours, and numbers are rounded up to
multiples of 4 or 8.
"dirreq-stats-end" YYYY-MM-DD HH:MM:SS (NSEC s) NL
[At most once.]
YYYY-MM-DD HH:MM:SS defines the end of the included measurement
interval of length NSEC seconds (86400 seconds by default).
A "dirreq-stats-end" line, as well as any other "dirreq-*" line,
is only added when the relay has opened its Dir port and after 24
hours of measuring directory requests.
"dirreq-v2-ips" CC=N,CC=N,... NL
[At most once.]
"dirreq-v3-ips" CC=N,CC=N,... NL
[At most once.]
List of mappings from two-letter country codes to the number of
unique IP addresses that have connected from that country to
request a v2/v3 network status, rounded up to the nearest multiple
of 8. Only those IP addresses are counted that the directory can
answer with a 200 OK status code.
"dirreq-v2-reqs" CC=N,CC=N,... NL
[At most once.]
"dirreq-v3-reqs" CC=N,CC=N,... NL
[At most once.]
List of mappings from two-letter country codes to the number of
requests for v2/v3 network statuses from that country, rounded up
to the nearest multiple of 8. Only those requests are counted that
the directory can answer with a 200 OK status code.
"dirreq-v2-share" num% NL
[At most once.]
"dirreq-v3-share" num% NL
[At most once.]
The share of v2/v3 network status requests that the directory
expects to receive from clients based on its advertised bandwidth
compared to the overall network bandwidth capacity. Shares are
formatted in percent with two decimal places. Shares are
calculated as means over the whole 24-hour interval.
"dirreq-v2-resp" status=num,... NL
[At most once.]
"dirreq-v3-resp" status=nul,... NL
[At most once.]
List of mappings from response statuses to the number of requests
for v2/v3 network statuses that were answered with that response
status, rounded up to the nearest multiple of 4. Only response
statuses with at least 1 response are reported. New response
statuses can be added at any time. The current list of response
statuses is as follows:
"ok": a network status request is answered; this number
corresponds to the sum of all requests as reported in
"dirreq-v2-reqs" or "dirreq-v3-reqs", respectively, before
rounding up.
"not-enough-sigs: a version 3 network status is not signed by a
sufficient number of requested authorities.
"unavailable": a requested network status object is unavailable.
"not-found": a requested network status is not found.
"not-modified": a network status has not been modified since the
If-Modified-Since time that is included in the request.
"busy": the directory is busy.
"dirreq-v2-direct-dl" key=val,... NL
[At most once.]
"dirreq-v3-direct-dl" key=val,... NL
[At most once.]
"dirreq-v2-tunneled-dl" key=val,... NL
[At most once.]
"dirreq-v3-tunneled-dl" key=val,... NL
[At most once.]
List of statistics about possible failures in the download process
of v2/v3 network statuses. Requests are either "direct"
HTTP-encoded requests over the relay's directory port, or
"tunneled" requests using a BEGIN_DIR cell over the relay's OR
port. The list of possible statistics can change, and statistics
can be left out from reporting. The current list of statistics is
as follows:
Successful downloads and failures:
"complete": a client has finished the download successfully.
"timeout": a download did not finish within 10 minutes after
starting to send the response.
"running": a download is still running at the end of the
measurement period for less than 10 minutes after starting to
send the response.
Download times:
"min", "max": smallest and largest measured bandwidth in B/s.
"d[1-4,6-9]": 1st to 4th and 6th to 9th decile of measured
bandwidth in B/s. For a given decile i, i/10 of all downloads
had a smaller bandwidth than di, and (10-i)/10 of all downloads
had a larger bandwidth than di.
"q[1,3]": 1st and 3rd quartile of measured bandwidth in B/s. One
fourth of all downloads had a smaller bandwidth than q1, one
fourth of all downloads had a larger bandwidth than q3, and the
remaining half of all downloads had a bandwidth between q1 and
q3.
"md": median of measured bandwidth in B/s. Half of the downloads
had a smaller bandwidth than md, the other half had a larger
bandwidth than md.
Entry guard statistics:
Entry guard statistics include the number of clients per country and
per day that are connecting directly to an entry guard.
Entry guard statistics are important to learn more about the
distribution of clients to countries. In the future, this knowledge
can be useful to detect if there are or start to be any restrictions
for clients connecting from specific countries.
The information which client connects to a given entry guard is very
sensitive. This information must not be combined with the information
what contents are leaving the network at the exit nodes. Therefore,
entry guard statistics need to be aggregated to prevent them from
becoming useful for de-anonymization. Aggregation includes resolving
IP addresses to country codes, counting events over 24-hour intervals,
and rounding up numbers to the next multiple of 8.
"entry-stats-end" YYYY-MM-DD HH:MM:SS (NSEC s) NL
[At most once.]
YYYY-MM-DD HH:MM:SS defines the end of the included measurement
interval of length NSEC seconds (86400 seconds by default).
An "entry-stats-end" line, as well as any other "entry-*"
line, is first added after the relay has been running for at least
24 hours.
"entry-ips" CC=N,CC=N,... NL
[At most once.]
List of mappings from two-letter country codes to the number of
unique IP addresses that have connected from that country to the
relay and which are no known other relays, rounded up to the
nearest multiple of 8.
Cell statistics:
The third type of statistics have to do with the time that cells spend
in circuit queues. In order to gather these statistics, the relay
memorizes when it puts a given cell in a circuit queue and when this
cell is flushed. The relay further notes the life time of the circuit.
These data are sufficient to determine the mean number of cells in a
queue over time and the mean time that cells spend in a queue.
Cell statistics are necessary to learn more about possible reasons for
the poor network performance of the Tor network, especially high
latencies. The same statistics are also useful to determine the
effects of design changes by comparing today's data with future data.
There are basically no privacy concerns from measuring cell
statistics, regardless of a node being an entry, middle, or exit node.
"cell-stats-end" YYYY-MM-DD HH:MM:SS (NSEC s) NL
[At most once.]
YYYY-MM-DD HH:MM:SS defines the end of the included measurement
interval of length NSEC seconds (86400 seconds by default).
A "cell-stats-end" line, as well as any other "cell-*" line,
is first added after the relay has been running for at least 24
hours.
"cell-processed-cells" num,...,num NL
[At most once.]
Mean number of processed cells per circuit, subdivided into
deciles of circuits by the number of cells they have processed in
descending order from loudest to quietest circuits.
"cell-queued-cells" num,...,num NL
[At most once.]
Mean number of cells contained in queues by circuit decile. These
means are calculated by 1) determining the mean number of cells in
a single circuit between its creation and its termination and 2)
calculating the mean for all circuits in a given decile as
determined in "cell-processed-cells". Numbers have a precision of
two decimal places.
"cell-time-in-queue" num,...,num NL
[At most once.]
Mean time cells spend in circuit queues in milliseconds. Times are
calculated by 1) determining the mean time cells spend in the
queue of a single circuit and 2) calculating the mean for all
circuits in a given decile as determined in
"cell-processed-cells".
"cell-circuits-per-decile" num NL
[At most once.]
Mean number of circuits that are included in any of the deciles,
rounded up to the next integer.
Exit statistics:
The last type of statistics affects exit nodes counting the number of
bytes written and read and the number of streams opened per port and
per 24 hours. Exit port statistics can be measured from looking of
headers of BEGIN and DATA cells. A BEGIN cell contains the exit port
that is required for the exit node to open a new exit stream.
Subsequent DATA cells coming from the client or being sent back to the
client contain a length field stating how many bytes of application
data are contained in the cell.
Exit port statistics are important to measure in order to identify
possible load-balancing problems with respect to exit policies. Exit
nodes that permit more ports than others are very likely overloaded
with traffic for those ports plus traffic for other ports. Improving
load balancing in the Tor network improves the overall utilization of
bandwidth capacity.
Exit traffic is one of the most sensitive parts of network data in the
Tor network. Even though these statistics do not require looking at
traffic contents, statistics are aggregated so that they are not
useful for de-anonymizing users. Only those ports are reported that
have seen at least 0.1% of exiting or incoming bytes, numbers of bytes
are rounded up to full kibibytes (KiB), and stream numbers are rounded
up to the next multiple of 4.
"exit-stats-end" YYYY-MM-DD HH:MM:SS (NSEC s) NL
[At most once.]
YYYY-MM-DD HH:MM:SS defines the end of the included measurement
interval of length NSEC seconds (86400 seconds by default).
An "exit-stats-end" line, as well as any other "exit-*" line, is
first added after the relay has been running for at least 24 hours
and only if the relay permits exiting (where exiting to a single
port and IP address is sufficient).
"exit-kibibytes-written" port=N,port=N,... NL
[At most once.]
"exit-kibibytes-read" port=N,port=N,... NL
[At most once.]
List of mappings from ports to the number of kibibytes that the
relay has written to or read from exit connections to that port,
rounded up to the next full kibibyte.
"exit-streams-opened" port=N,port=N,... NL
[At most once.]
List of mappings from ports to the number of opened exit streams
to that port, rounded up to the nearest multiple of 4.
Implementation notes:
Right now, relays that are configured accordingly write similar
statistics to those described in this proposal to disk every 24 hours.
With this proposal being implemented, relays include the contents of
these files in extra-info documents.
The following steps are necessary to implement this proposal:
1. The current format of [dirreq|entry|buffer|exit]-stats files needs
to be adapted to the description in this proposal. This step
basically means renaming keywords.
2. The timing of writing the four *-stats files should be unified, so
that they are written exactly after 24 hours after starting the
relay. Right now, the measurement intervals for dirreq, entry, and
exit stats starts with the first observed request, and files are
written when observing the first request that occurs more than 24
hours after the beginning of the measurement interval. With this
proposal, the measurement intervals should all start at the same
time, and files should be written exactly 24 hours later.
3. It is advantageous to cache statistics in local files in the data
directory until they are included in extra-info documents. The
reason is that the 24-hour measurement interval can be very
different from the 18-hour publication interval of extra-info
documents. When a relay crashed after finishing a measurement
interval, but before publishing the next extra-info document,
statistics would get lost. Therefore, statistics are written to
disk when finishing a measurement interval and read from disk when
generating an extra-info document. As a result, the *-stats files
need to be overwritten after 24 hours, rather than appending new
statistics to them. Further, the contents of the *-stats files need
to be checked in the process of generating extra-info documents.
4. With the statistics patches being tested, the ./configure options
should be removed and the statistics code be compiled by default.
It is still required for relay operators to add configuration
options (DirReqStatistics, ExitPortStatistics, etc.) to enable
gathering statistics. However, in the near future, statistics shall
be enabled gathered by all relays by default, where requiring a
./configure option would be a barrier for many relay operators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkpmM2EACgkQ0M+WPffBEmVxvwCePIPo/oWaHqspvidENbuxWXzB
PJkAn2oaYfyy67CK3ui/AmMYt/lUl1JP
=oWQx
-----END PGP SIGNATURE-----