[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

[tor-relays] Force OpenSSL AES-NI usage on a VPS without the AES CPU flag passthrough



Hello,

Today I found that it is possible to force OpenSSL enable the use of CPU AES
acceleration even if it doesn't detect the "aes" CPU flag.

Many VPS hosts configure their hypervisors in a way that does not have the
flag passed through into VPSes, even though all their host nodes surely have
CPUs with support for AES-NI. In my experience hosts have not been forthcoming
in reconfiguring their systems to include that flag passthrough.

But it turns out we can force OpenSSL to believe AES is supported, even
if the CPU does not report it. This can be done with the "OPENSSL_ia32cap"
environment variable. Searching around, all I found was scenarios to use it for
disabling AES-NI (for testing), e.g.: 

  https://mjanja.ch/2013/11/disabling-aes-ni-on-linux-openssl/

I believe the syntax used there applies "xor" over the real flag values, e.g.
OPENSSL_ia32cap="~0x200000200000000" to disable AES. But what if you need to
force-enable it. Turns out the syntax working for that is simply:

  OPENSSL_ia32cap="+0x200000200000000"

Let's take one VPS box with the aforementioned problem. 

# cat /proc/cpuinfo 
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 13
model name	: QEMU Virtual CPU version 1.5.3
stepping	: 3
microcode	: 0x1
cpu MHz		: 1695.729
cache size	: 4096 KB
physical id	: 0
siblings	: 1
core id		: 0
cpu cores	: 1
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 4
wp		: yes
flags		: fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm rep_good nopl eagerfpu pni cx16 hypervisor lahf_lm
bugs		:
bogomips	: 3391.45
clflush size	: 64
cache_alignment	: 64
address sizes	: 46 bits physical, 48 bits virtual
power management:

As you can see "aes" is not present.

Testing OpenSSL speed in the default configuration.

# openssl speed -elapsed -evp aes-128-gcm
...
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-128-gcm      32332.17k    40365.80k    42265.77k    42376.19k  43196.42k    43401.22k

And now we force AES hardware acceleration usage:

# OPENSSL_ia32cap="+0x200000200000000" openssl speed -elapsed -evp aes-128-gcm
...
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes  16384 bytes
aes-128-gcm      59047.07k   104467.39k   141712.21k   151093.93k   158321.32k   156827.65k

Almost 4 times faster! For Tor this leads to higher bandwidth utilization and lower CPU usage
(which will actually make your VPS host happier :)

But how to apply that to Tor? Well, for some initial testing I just chose to add the following
line to /etc/init.d/tor (not using systemd here), right after "#! /bin/bash":

  export OPENSSL_ia32cap="+0x200000200000000"

(but this will get overwritten and removed by the next Tor version upgrade).

Seems to work just fine, my CPU usage is half of what it was before, at similar bandwidth levels.
So now it has headroom to ramp up further.

A word of caution, firstly always test as shown above to verify that it works.

I believe if the underlying CPU actually doesn't support AES, all programs trying to use it,
including "openssl speed", will crash outright, with an incorrect instruction error, or somesuch.

So there is no risk to jeopardize encryption strength or security of Tor.

Also even if it works now, it may stop working down the line if the host migrates your VPS to
a node with older CPU, one which doesn't support AES. But migrations of customers between do not
happen very often, and in fact all CPUs used today in a hosting environment should support
AES, as that's been implemented in server (and even desktop) CPUs a very very long time ago.

(Apologies for double-post, I realized tor-relays should have been the better place to post).

-- 
With respect,
Roman
_______________________________________________
tor-relays mailing list
tor-relays@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays