[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: [tor-relays] Bridge operator iat_mode setting



Hi Luiz

Am 23.02.2021 um 02:18 schrieb torjoy:
I work with time and frequency references and run some tor bridges. What is the objective of "iat_mode" setting? Is an good timming reference important for this setting? For now, i'm adminstrating 3 briges, one with iat_mode=0, iat_mode=1 and iat_mode=2.
Could you explain or forward me to some reading about it?

There might be other sources, but this is a short and nice one:

[
https://github.com/mikeperry-tor/vanguards/blob/master/README_SECURITY.md ]
§ The Best Way To Use Bridges

Note the use of the iat-mode=2 parameter. Setting iat-mode=2 (as opposed
to iat-mode=0 or 1) causes obfs4 to inject traffic timing changes into
your outgoing traffic, which is exactly the direction you want as a
service. The bridge itself does not need to have the same setting.


You can apply it to the client and/or the bridge. The outbound timing
will be handled accordingly.



--
Cheers, Felix
_______________________________________________
tor-relays mailing list
tor-relays@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays