Re: [tor-relays] running relay severely degrades network performance eventually

[Andy Isaacson <adi@xxxxxxxxxxxxx>]

On Mon, Jan 21, 2013 at 04:31:01PM -0700, Nicolas Bock wrote:
> every time I run a relay on a Comcast cable connection, after a while (a
> few hours to days) other network operations such as DNS lookups slow down
> to such an extent that the network becomes unusable. Unfortunately I don't
> know how to exactly pinpoint what the problem is, but found that the only
> reliable solution at such a point seems to be to reset the cable modem.
> 
> Is that a known issue? Could you suggest how I can diagnose this more
> accurately?

Two likely possible causes:  either your relay is using a lot of
bandwidth and causing congestion, or your cable modem is doing NAT and
the many active TCP connections from the relay overload the modem's
feeble mind.  Try reducing the maximum bandwidth in your torrc and see
if that resolves the problem.

To get closer to a root cause, I'd use mtr,
http://en.wikipedia.org/wiki/MTR_%28software%29 , to compare performance
during a "speedy" period and during a "slow" period.  Specifically, I'd
"mtr -u some-nearby-IP" and switch to "last" mode with the 'd' command,
twice.  This lets me see where in my pipeline the slowdown is likely
occurring.  If the location of the bottlenck changes over time as the
visible performance gets worse, then there is a clue where the
performance change is coming from.

-andy
_______________________________________________
tor-relays mailing list
tor-relays@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays