Hi, > On 1 Jun 2019, at 14:57, Matt Westfall <mwestfall@xxxxxxxxxxx> wrote: > > Hello thanks for the comments, I might do that, remove the limits, because it's self limiting by the 1 Gbps network port, so it can't use more than that anyway. Following the instructions here: https://trac.torproject.org/projects/tor/wiki/doc/MyRelayIsSlow#TorNetworkLimits It looks like your relay is limited by its own observed bandwidth. (The observed bandwidth that your relay has seen itself using.) So increasing the RelayBandwidthRate would be a good idea. If your relay's observed bandwidth gets above 9 megabytes a second, your relay will be limited by the bandwidth authorities' measurements. (The median measurement for your relay is 8910 scaled kilobytes per second.) https://consensus-health.torproject.org/consensus-health-2019-06-02-04-00.html#B1B10104EB72A1FBBF6687B05F1915D87D00DBDE There might not be much you can do about this: Comcast has slow peering with a large number of internet networks. And it looks like 4/6 of tor's current bandwidth authorities are on those networks. This isn't something Tor can fix: we can only measure the bandwidth that Comcast is giving you. If Comcast has slow peering to US East and Europe, then clients using your relay will be slow. > I tried to run chutney tests to see what hardware supports but haven't quite figured out what the command line I should be using is. > > Any help with that would be appreciated. You're right, the README is more confusing than it needs to be. Try: ./chutney/tools/test-network.sh --data $[10*1024*1024] If a 10 MB transfer is too fast, try 100 MB. I opened this ticket for us to fix our documentation: https://trac.torproject.org/projects/tor/ticket/30720 T
Attachment:
signature.asc
Description: Message signed with OpenPGP
_______________________________________________ tor-relays mailing list tor-relays@xxxxxxxxxxxxxxxxxxxx https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays