[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

gEDA-user: New mass attribute tool: gattrib_csv

Hey guys. I wrote a tool which exports and imports the properties from a project to and to a csv file. The format is simular to that of the bom2 format as it groups lines together which have similar data. This way I could use oocalc to mass edit the attributes. Each component in my design now has its price, distributer, manufactuer, width. height. etc etc. asociated with it. Because similar data shows up on the same line I could specify the vendor for all 40 resistors of a particular value with a single edit, and then the vendor for 20 caps with another single edit. I can copy and paste a row of attributes from one group of parts to another group of parts. It accepts an filter file to specify which attributes to export. Parts do not need to have refdeses before the tool can work. Parts are distinguished by position in the csv when the refdes is not specific enough. Do backup your project before you try it. It can be downloaded from 

http://public.laserlinc.com/Joshua/gattrib_csv.java

I know.  It is written in java.  The following command compiles it to exe.

gcj --main=gattrib_csv -o gattrib_csv gattrib_csv.java

Have fun :-)
~Joshua


On 4/1/2011 12:00 PM, geda-user-request@xxxxxxxxxxxxxx wrote:

Send geda-user mailing list submissions to
	geda-user@xxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
	http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
or, via email, send a message with subject or body 'help' to
	geda-user-request@xxxxxxxxxxxxxx

You can reach the person managing the list at
	geda-user-owner@xxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of geda-user digest..."


Today's Topics:

    1. Re: SC70-6, which is pin 1? (Stephen Trier)
    2. Re: SC70-6, which is pin 1? (Duncan Drennan)
    3. Re: SC70-6, which is pin 1? (Cullen Newsom)


----------------------------------------------------------------------

Message: 1
Date: Fri, 1 Apr 2011 06:21:30 -0400
From: Stephen Trier<stephen.trier+geda@xxxxxxxxx>
Subject: Re: gEDA-user: SC70-6, which is pin 1?
To: gEDA user mailing list<geda-user@xxxxxxxxxxxxxx>
Message-ID:
	<AANLkTinbEZNM0aFEU2OffSVPOW=rAwtjz8RsWSZy-v6G@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"

It's hard to be sure from the picture, though my best guess matches yours.
If you want to be sure, take a look in the data sheet for the package
markings section. It will tell you what to look for.

                 Stephen
-------------- next part --------------
    It's hard to be sure from the picture, though my best guess matches
    yours. If you want to be sure, take a look in the data sheet for the
    package markings section. It will tell you what to look for.

                    Stephen

------------------------------

Message: 2
Date: Fri, 1 Apr 2011 12:58:41 +0200
From: Duncan Drennan<duncan.drennan@xxxxxxxxx>
Subject: Re: gEDA-user: SC70-6, which is pin 1?
To: gEDA user mailing list<geda-user@xxxxxxxxxxxxxx>
Message-ID:
	<AANLkTi=q3w8zEfaXYi1NL-tUPrMSNE-1h_WUrD+7RXeC@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1


I'm guessing based off that mark the bottom left pin is pin 1. The
datasheet isn't clear. Does anybody know for sure if thats pin 1?

Yes, bottom left is pin 1.


------------------------------

Message: 3
Date: Fri, 1 Apr 2011 07:21:06 -0500
From: Cullen Newsom<cullennewsom@xxxxxxxxx>
Subject: Re: gEDA-user: SC70-6, which is pin 1?
To: gEDA user mailing list<geda-user@xxxxxxxxxxxxxx>
Message-ID:
	<AANLkTin5v69=dRXnDkL+5nFzg0oE=XwOL5rhyE_6tGLw@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"

Have you got a part number for it? What's inside? You could use a DMM to
confirm, if you consider its internals. Your guess of bottom left seems
reasonable.

-CN

On Fri, Apr 1, 2011 at 4:13 AM, yamazakir2<yamazakir2@xxxxxxxxx>  wrote:


I'm guessing based off that mark the bottom left pin is pin 1. The
datasheet isn't clear. Does anybody know for sure if thats pin 1?



_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user



-------------- next part --------------
    Have you got a part number for it? What's inside? You could use a DMM
    to confirm, if you consider its internals. Your guess of bottom left
    seems reasonable.
    -CN

    On Fri, Apr 1, 2011 at 4:13 AM, yamazakir2<[1]yamazakir2@xxxxxxxxx>
    wrote:

      I'm guessing based off that mark the bottom left pin is pin 1. The
      datasheet isn't clear. Does anybody know for sure if thats pin 1?
      _______________________________________________
      geda-user mailing list
      [2]geda-user@xxxxxxxxxxxxxx
      [3]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user

References

    1. mailto:yamazakir2@xxxxxxxxx
    2. mailto:geda-user@xxxxxxxxxxxxxx
    3. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user

------------------------------

_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user


End of geda-user Digest, Vol 59, Issue 2
****************************************




_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user