Mail Thread Index

• Author Index

• gEDA-user: SC70-6, which is pin 1?, yamazakir2
  • Re: gEDA-user: SC70-6, which is pin 1?, Stephen Trier
  • Re: gEDA-user: SC70-6, which is pin 1?, Duncan Drennan
  • Re: gEDA-user: SC70-6, which is pin 1?, Cullen Newsom
    • Re: gEDA-user: SC70-6, which is pin 1?, yamazakir2
      • Re: gEDA-user: SC70-6, which is pin 1?, Steven Michalske
      • Re: gEDA-user: SC70-6, which is pin 1?, Joe Chisolm - Gmail
      • Re: gEDA-user: SC70-6, which is pin 1?, yamazakir2
• gEDA-user: New mass attribute tool: gattrib_csv, Joshua
  • Re: gEDA-user: New mass attribute tool: gattrib_csv, Russell Dill
    • Re: gEDA-user: New mass attribute tool: gattrib_csv, Joshua
      • Re: gEDA-user: New mass attribute tool: gattrib_csv, Kai-Martin Knaak
      • Re: gEDA-user: New mass attribute tool: gattrib_csv, DJ Delorie
  • Re: gEDA-user: New mass attribute tool: gattrib_csv, Kai-Martin Knaak
    • Re: gEDA-user: New mass attribute tool: gattrib_csv, Stefan Salewski
  • <Possible follow-ups>
  • Re: gEDA-user: New mass attribute tool: gattrib_csv, Joshua
• Re: gEDA-user: Make vias exposed, Kai-Martin Knaak
  • Re: gEDA-user: Make vias exposed, DJ Delorie
• Re: gEDA-user: Please check for artaefacts in git HEAD PCB, Kai-Martin Knaak
• Re: gEDA-user: US Distributor for Balloon Board, Dave McGuire
  • Re: gEDA-user: US Distributor for Balloon Board, Stephan Boettcher
  • <Possible follow-ups>
  • Re: gEDA-user: US Distributor for Balloon Board, rickman
    • Re: gEDA-user: US Distributor for Balloon Board, Patrick Doyle
      • Message not available
      • Re: gEDA-user: US Distributor for Balloon Board, rickman
    • Re: gEDA-user: US Distributor for Balloon Board, Dave McGuire
• gEDA-user: Two Power Supplies in gschem, Daniel B.
  • Re: gEDA-user: Two Power Supplies in gschem, Kai-Martin Knaak
  • Re: gEDA-user: Two Power Supplies in gschem, Stefan Salewski
    • Re: gEDA-user: Two Power Supplies in gschem, Daniel B.
  • Re: gEDA-user: Two Power Supplies in gschem, Thomas Oldbury
• gEDA-user: anybody use ngspice with openmp?, yamazakir2
• gEDA-user: Modding Nintendo 3DS controllers for accessability, Peter Clifton
  • Re: gEDA-user: Modding Nintendo 3DS controllers for accessability, Ben Jackson
    • Re: gEDA-user: Modding Nintendo 3DS controllers for accessability, Peter Clifton
• gEDA-user: Configuring PCB for out of source builds?, Bob Paddock
  • Re: gEDA-user: Configuring PCB for out of source builds?, DJ Delorie
    • Re: gEDA-user: Configuring PCB for out of source builds?, Mark Rages
      • Re: gEDA-user: Configuring PCB for out of source builds?, DJ Delorie
• gEDA-user: zview/ngscope, A.Burinskiy
  • Re: gEDA-user: zview/ngscope, Kai-Martin Knaak
    • Re: gEDA-user: zview/ngscope, A.Burinskiy
      • Re: gEDA-user: zview/ngscope, Hannu Vuolasaho
      • Re: gEDA-user: zview/ngscope, Kai-Martin Knaak
      • Re: gEDA-user: zview/ngscope, rickman
      • Re: gEDA-user: zview/ngscope, Kai-Martin Knaak
      • Re: gEDA-user: zview/ngscope, Bert Timmerman
      • Re: gEDA-user: zview/ngscope, Kai-Martin Knaak
      • Re: gEDA-user: zview/ngscope, rickman
      • Re: gEDA-user: zview/ngscope, Kai-Martin Knaak
      • Re: gEDA-user: zview/ngscope, rickman
      • Re: gEDA-user: zview/ngscope, Larry Doolittle
      • Re: gEDA-user: zview/ngscope, Peter Clifton
      • Re: gEDA-user: zview/ngscope, Larry Doolittle
      • Re: gEDA-user: zview/ngscope, A.Burinskiy
      • Re: gEDA-user: zview/ngscope, rickman
      • Re: gEDA-user: zview/ngscope, gedau
      • Re: gEDA-user: zview/ngscope, Andrzej
      • Re: gEDA-user: zview/ngscope, A.Burinskiy
      • Re: gEDA-user: zview/ngscope, Kai-Martin Knaak
      • Re: gEDA-user: zview/ngscope, yamazakir2
      • Re: gEDA-user: zview/ngscope, Stephan Boettcher
      • Re: gEDA-user: zview/ngscope, Dave McGuire
      • Re: gEDA-user: zview/ngscope, John Doty
      • Re: gEDA-user: zview/ngscope, Rubén Gómez Antolí
      • Re: gEDA-user: zview/ngscope, John Doty
      • gEDA-user: Change the subject line! [WAS: Re: zview/ngscope], Peter Clifton
      • Re: gEDA-user: Power users us normal users, a conflict? [WAS: Re: zview/ngscope], RubÃn GÃmez AntolÃ
      • Re: gEDA-user: Power users us normal users, a conflict?, Stephan Boettcher
      • Re: gEDA-user: Power users us normal users, a conflict?, John Doty
      • Re: gEDA-user: Power users us normal users, a conflict?, Rubén Gómez Antolí
      • Re: gEDA-user: zview/ngscope, Russell Dill
      • gEDA-user: Oscopy input formats (was Re: zview/ngscope), Arnaud Gardelein
      • Re: gEDA-user: Oscopy input formats (was Re: zview/ngscope), Andrzej
• Re: gEDA-user: pcb-20100929 released, Cesar Strauss
  • Re: gEDA-user: pcb-20100929 released, Duncan Drennan
    • Re: gEDA-user: pcb-20100929 released, Peter Clifton
      • Re: gEDA-user: pcb-20100929 released, Duncan Drennan
      • Re: gEDA-user: pcb-20100929 released, Cesar Strauss
      • Re: gEDA-user: pcb-20100929 released, Duncan Drennan
      • Re: gEDA-user: pcb-20100929 released, Peter Clifton
      • Re: gEDA-user: pcb-20100929 released, Duncan Drennan
      • Re: gEDA-user: pcb-20100929 released, Duncan Drennan
      • Re: gEDA-user: pcb-20100929 released, Felix Ruoff
      • Re: gEDA-user: pcb-20100929 released, Cesar Strauss
      • Re: gEDA-user: pcb-20100929 released, Cesar Strauss
• gEDA-user: gnetlist and "flat" hierarchy handling, JohnLM
  • Re: gEDA-user: gnetlist and "flat" hierarchy handling, Kai-Martin Knaak
• gEDA-user: simulation data reader, Dan White
• gEDA-user: Split ground planes and zero ohm jumpers, Russell Dill
  • Re: gEDA-user: Split ground planes and zero ohm jumpers, Kovacs Levente
    • Re: gEDA-user: Split ground planes and zero ohm jumpers, Russell Dill
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Levente Kovacs
    • Re: gEDA-user: Split ground planes and zero ohm jumpers, Markus Traidl
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Kovacs Levente
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Kai-Martin Knaak
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Stephen Ecob
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Russell Dill
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, John Griessen
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Kovacs Levente
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Kai-Martin Knaak
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Kovacs Levente
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, rickman
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Stephan Boettcher
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Steven Michalske
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, rickman
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Russell Dill
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, John Griessen
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Karl Hammar
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, DJ Delorie
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Russell Dill
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Steven Michalske
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Karl Hammar
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, DJ Delorie
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Stephan Boettcher
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, John Griessen
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Mark Rages
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, rickman
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Stephan Boettcher
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Stephan Boettcher
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, John Griessen
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Stephan Boettcher
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Thomas Oldbury
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Martin Kupec
      • Re: gEDA-user: Split ground planes and zero ohm jumpers, Russell Dill
• gEDA-user: Bug in gnetlist?, Abhijit Kshirsagar
  • Re: gEDA-user: Bug in gnetlist?, Krzysztof KoÅciuszkiewicz
    • Re: gEDA-user: Bug in gnetlist?, Abhijit Kshirsagar
• gEDA-user: PCB Netlist syntax, Abhijit Kshirsagar
  • Re: gEDA-user: PCB Netlist syntax, DJ Delorie
    • Re: gEDA-user: PCB Netlist syntax, Abhijit Kshirsagar
  • Re: gEDA-user: PCB Netlist syntax, Bob Paddock
    • Re: gEDA-user: PCB Netlist syntax, Abhijit Kshirsagar
• gEDA-user: Small change to get pcb to build on my FreeBSD machine, Ed Maste
  • Re: gEDA-user: Small change to get pcb to build on my FreeBSD machine, DJ Delorie
• gEDA-user: Footprint/symbol generating scripts + question, Richard Rasker
  • Re: gEDA-user: Footprint/symbol generating scripts + question, Stephan Boettcher
    • Re: gEDA-user: Footprint/symbol generating scripts + question, Geoff Swan
      • Re: gEDA-user: Footprint/symbol generating scripts + question, DJ Delorie
      • Re: gEDA-user: Footprint/symbol generating scripts + question, Kai-Martin Knaak
      • Re: gEDA-user: Footprint/symbol generating scripts + question, Larry Doolittle
• gEDA-user: PCB: Isolated snippets of ground planes in the middle, Paul Wiedenbeck
  • Re: gEDA-user: PCB: Isolated snippets of ground planes in the middle, DJ Delorie
    • Re: gEDA-user: PCB: Isolated snippets of ground planes in the middle, Peter Clifton
• gEDA-user: Sorta OT: What kind of paper is used for owners manuals?, yamazakir2
  • Re: gEDA-user: Sorta OT: What kind of paper is used for owners manuals?, Thomas Oldbury
    • Re: gEDA-user: Sorta OT: What kind of paper is used for owners manuals?, yamazakir2
  • Re: gEDA-user: Sorta OT: What kind of paper is used for owners manuals?, Hannu Vuolasaho
• gEDA-user: inherited attribute, Vincent
  • Re: gEDA-user: inherited attribute, Kai-Martin Knaak
  • Re: gEDA-user: inherited attribute, Felipe De La Puente
• Re: gEDA-user: gschem usability: expand the component tree after filtering, Felix Ruoff
  • Re: gEDA-user: gschem usability: expand the component tree after filtering, Krzysztof KoÅciuszkiewicz
    • Re: gEDA-user: gschem usability: expand the component tree after filtering, Felix Ruoff
• gEDA-user: lost mail, Vincent
  • Re: gEDA-user: lost mail, DJ Delorie
  • <Possible follow-ups>
  • Re: gEDA-user: lost mail, Vincent
• gEDA-user: inherited attributes, Vincent
  • Re: gEDA-user: inherited attributes, Stefan Salewski
  • <Possible follow-ups>
  • Re: gEDA-user: inherited attributes, Vincent
• gEDA-user: OT?: Altium (Protel) Relocates From Sydney Australia to Shanghai China, Bob Paddock
  • Re: gEDA-user: OT?: Altium (Protel) Relocates From Sydney Australia to Shanghai China, gedau
    • Re: gEDA-user: OT?: Altium (Protel) Relocates From Sydney Australia to Shanghai China, Evan Foss
      • Re: gEDA-user: OT?: Altium (Protel) Relocates From Sydney Australia to Shanghai China, Andrew Seddon
• gEDA-user: Strokes in gEDA (gschem), Markus Traidl
  • Re: gEDA-user: Strokes in gEDA (gschem), Vladimir Zhbanov
• gEDA-user: please recommend me a good water soluable flux, yamazakir2
  • Re: gEDA-user: please recommend me a good water soluable flux, John Luciani
• gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, John Griessen
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
    • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, John Griessen
    • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Steven Michalske
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Ethan Swint
    • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Stefan Salewski
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Stefan Salewski
    • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Steven Michalske
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Stefan Salewski
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Steven Michalske
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Kai-Martin Knaak
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Larry Doolittle
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Larry Doolittle
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Markus Hitter
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Eduardo Costa
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Steven Michalske
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Kai-Martin Knaak
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
  • <Possible follow-ups>
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
    • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
    • gEDA-user: Fwd: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
    • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Peter Clifton
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Andrew Seddon
      • Re: gEDA-user: RFC using SVG with semantic markup as an EDA format, Stephan Boettcher
• gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Markus Traidl
  • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Krzysztof KoÅciuszkiewicz
  • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Krzysztof KoÅciuszkiewicz
    • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Stefan Salewski
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Geoff Swan
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Powerand Port Symbols, Wojciech Kazubski
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Powerand Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Steven Michalske
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Mark Rages
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Kai-Martin Knaak
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Mark Rages
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, John Doty
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Russell Dill
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Krzysztof KoÅciuszkiewicz
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, DJ Delorie
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, DJ Delorie
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, DJ Delorie
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Colin D Bennett
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, DJ Delorie
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Krzysztof KoÅciuszkiewicz
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Gabriel Paubert
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Stephan Boettcher
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Gabriel Paubert
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Kai-Martin Knaak
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, John Doty
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Mark Rages
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Krzysztof KoÅciuszkiewicz
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, DJ Delorie
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, DJ Delorie
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Peter Clifton
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, Stephan Boettcher
      • Re: gEDA-user: Attribute Net (without pin assignment) - for Power and Port Symbols, John Doty
• gEDA-user: default pcb stackup change?, DJ Delorie
  • Re: gEDA-user: default pcb stackup change?, Peter Clifton
    • Re: gEDA-user: default pcb stackup change?, Stephan Boettcher
      • Re: gEDA-user: default pcb stackup change?, DJ Delorie
      • Re: gEDA-user: default pcb stackup change?, Peter Clifton
      • Re: gEDA-user: default pcb stackup change?, DJ Delorie
      • Re: gEDA-user: default pcb stackup change?, Steven Michalske
  • Re: gEDA-user: default pcb stackup change?, Kai-Martin Knaak
    • Re: gEDA-user: default pcb stackup change?, Vanessa Ezekowitz
  • Re: gEDA-user: default pcb stackup change?, Bob Paddock
    • Re: gEDA-user: default pcb stackup change?, DJ Delorie
    • Re: gEDA-user: default pcb stackup change?, John Griessen
      • Re: gEDA-user: default pcb stackup change?, Steven Michalske
  • Re: gEDA-user: default pcb stackup change?, John Griessen
  • Re: gEDA-user: default pcb stackup change?, Abhijit Kshirsagar
    • Re: gEDA-user: default pcb stackup change?, DJ Delorie
    • Re: gEDA-user: default pcb stackup change?, gedau
  • Re: gEDA-user: default pcb stackup change?, Gabriel Paubert
    • Re: gEDA-user: default pcb stackup change?, DJ Delorie
      • Re: gEDA-user: default pcb stackup change?, Gabriel Paubert
      • Re: gEDA-user: default pcb stackup change?, DJ Delorie
    • Re: gEDA-user: default pcb stackup change?, John Griessen
  • Re: gEDA-user: default pcb stackup change?, Mark Rages
    • Re: gEDA-user: default pcb stackup change?, Kai-Martin Knaak
  • Re: gEDA-user: default pcb stackup change?, Felix Ruoff
• Re: gEDA-user: RFC using SVG with semantic markup as an EDA, Andrew Seddon
  • Re: gEDA-user: RFC using SVG with semantic markup as an EDA, John Griessen
• gEDA-user: OFF: capacitors for RF power amplifier, Kovacs Levente
  • Re: gEDA-user: OFF: capacitors for RF power amplifier, Uwe Bonnes
    • Re: gEDA-user: OFF: capacitors for RF power amplifier, Andy Fierman
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, John Doty
    • Re: gEDA-user: OFF: capacitors for RF power amplifier, Kovacs Levente
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, Steven Michalske
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, John Doty
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, John Doty
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, Uwe Bonnes
  • Re: gEDA-user: OFF: capacitors for RF power amplifier, Ben Jackson
  • Re: gEDA-user: OFF: capacitors for RF power amplifier, gene glick
  • Re: gEDA-user: OFF: capacitors for RF power amplifier, gene glick
  • Re: gEDA-user: OFF: capacitors for RF power amplifier, Wojciech Kazubski
    • Re: gEDA-user: OFF: capacitors for RF power amplifier, Andy Fierman
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, Russell Dill
      • Re: gEDA-user: OFF: capacitors for RF power amplifier, Gabriel Paubert
• gEDA-user: Spam Email to This List, rickman
  • Re: gEDA-user: Spam Email to This List, Felix Ruoff
  • Re: gEDA-user: Spam Email to This List, Andrew Seddon
    • Re: gEDA-user: Spam Email to This List, gedau
      • Re: gEDA-user: Spam Email to This List, rickman
      • Re: gEDA-user: Spam Email to This List, gedau
      • Re: gEDA-user: Spam Email to This List, Kai-Martin Knaak
      • Re: gEDA-user: Spam Email to This List, Raymond Lillard
  • Re: gEDA-user: Spam Email to This List, Thomas Oldbury
  • Re: gEDA-user: Spam Email to This List, David C. Kerber
  • Re: gEDA-user: Spam Email to This List, Abhijit Kshirsagar
• gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
  • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Thomas Oldbury
    • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
  • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, DJ Delorie
    • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Bob Paddock
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Tom Pope
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, DJ Delorie
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Peter Clifton
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Kai-Martin Knaak
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, DJ Delorie
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Peter Clifton
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, DJ Delorie
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, gedau
      • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, DJ Delorie
    • Re: gEDA-user: Where is pcb-20100929 for Win32 ?, Vaclav Peroutka
• gEDA-user: PCB Panelisation and outline layers, Tom Pope
  • Re: gEDA-user: PCB Panelisation and outline layers, DJ Delorie
    • Re: gEDA-user: PCB Panelisation and outline layers, Gabriel Paubert
• Re: gEDA-user: Tragesym template problem., Werner Hoch
• gEDA-user: Parallel Installation of Stable and Unstable gEDA Version, Markus Traidl
  • Re: gEDA-user: Parallel Installation of Stable and Unstable gEDA Version, Tom Pope
  • Re: gEDA-user: Parallel Installation of Stable and Unstable gEDA Version, Peter Clifton
    • Re: gEDA-user: Parallel Installation of Stable and Unstable gEDA Version, Colin D Bennett
      • Re: gEDA-user: Parallel Installation of Stable and Unstable gEDA Version, Peter Clifton
• gEDA-user: eagle to open source library conversion, Kai-Martin Knaak
• gEDA-user: [spice] capacitor current, Levente Kovacs
  • Re: gEDA-user: [spice] capacitor current, al davis
    • Re: gEDA-user: [spice] capacitor current, Levente Kovacs
  • Re: gEDA-user: [spice] capacitor current, John Doty
    • Re: gEDA-user: [spice] capacitor current, Levente Kovacs
• gEDA-user: zener diode modeling, yamazakir2
  • Re: gEDA-user: zener diode modeling, Andy Fierman
    • Re: gEDA-user: zener diode modeling, yamazakir2
      • Re: gEDA-user: zener diode modeling, Andy Fierman
  • Re: gEDA-user: zener diode modeling, al davis
• gEDA-user: [PATCH] allow empty pinlabels in tragesym, Stefan Tauner
• gEDA-user: PCB nanometer conversion, Andrew Poelstra
  • Re: gEDA-user: PCB nanometer conversion, DJ Delorie
    • Re: gEDA-user: PCB nanometer conversion, Andrew Poelstra
      • Re: gEDA-user: PCB nanometer conversion, DJ Delorie
  • Re: gEDA-user: PCB nanometer conversion, Peter Clifton
• gEDA-user: Dispersing updated & new elements -- question, Richard Rasker
  • Re: gEDA-user: Dispersing updated & new elements -- question, DJ Delorie
• gEDA-user: Origami Flex Circuits Take Shape at All Flex, Bob Paddock
  • Re: gEDA-user: Origami Flex Circuits Take Shape at All Flex, Dave McGuire
  • <Possible follow-ups>
  • Re: gEDA-user: Origami Flex Circuits Take Shape at All Flex, Andrew Miner
    • Re: gEDA-user: Origami Flex Circuits Take Shape at All Flex, Steven Michalske
• gEDA-user: Segfault in pcb when exporting (latest branch), Andrew Poelstra
  • Re: gEDA-user: Segfault in pcb when exporting (latest branch), Link
    • Re: gEDA-user: Segfault in pcb when exporting (latest branch), Geoff Swan
      • Re: gEDA-user: Segfault in pcb when exporting (latest branch), Peter Clifton
• gEDA-user: PCB gcode generation, Mikey Sklar
  • Re: gEDA-user: PCB gcode generation, John Griessen
    • Re: gEDA-user: PCB gcode generation, Alberto Maccioni
      • Re: gEDA-user: PCB gcode generation, Markus Hitter
      • Re: gEDA-user: PCB gcode generation, Alberto Maccioni
      • Re: gEDA-user: PCB gcode generation, Markus Hitter
      • Re: gEDA-user: PCB gcode generation, Alberto Maccioni
      • Re: gEDA-user: PCB gcode generation, Markus Hitter
      • Re: gEDA-user: PCB gcode generation, Peter Clifton
      • Re: gEDA-user: PCB gcode generation, Alberto Maccioni
      • Re: gEDA-user: PCB gcode generation, Peter Clifton
• gEDA-user: Wrong Pinout for LM337, Daniel B.
  • Re: gEDA-user: Wrong Pinout for LM337, Stefan Salewski
• gEDA-user: SOIC footprints in PCB, Rob Butts
  • Re: gEDA-user: SOIC footprints in PCB, Thomas Oldbury
    • Re: gEDA-user: SOIC footprints in PCB, Thomas Oldbury
    • Re: gEDA-user: SOIC footprints in PCB, Rob Butts
  • Re: gEDA-user: SOIC footprints in PCB, Kai-Martin Knaak
• gEDA-user: How to identify a refdes' owner in gSchem, Rob Butts
  • Re: gEDA-user: How to identify a refdes' owner in gSchem, Mark Rages
  • Re: gEDA-user: How to identify a refdes' owner in gSchem, Rob Butts
    • Re: gEDA-user: How to identify a refdes' owner in gSchem, Mark Rages
      • Re: gEDA-user: How to identify a refdes' owner in gSchem, Rob Butts
      • Re: gEDA-user: How to identify a refdes' owner in gSchem, Rob Butts
      • Re: gEDA-user: How to identify a refdes' owner in gSchem, DJ Delorie
      • Re: gEDA-user: How to identify a refdes' owner in gSchem, Rob Butts
      • Re: gEDA-user: How to identify a refdes' owner in gSchem, Stephan Boettcher
• gEDA-user: Building PCB so it uses my footprint directory, Thomas Oldbury
  • Re: gEDA-user: Building PCB so it uses my footprint directory, Kai-Martin Knaak
• gEDA-user: Can i use geda for electric indoor installation?, Jonas Stein
  • Re: gEDA-user: Can i use geda for electric indoor installation?, Stephan Boettcher