gEDA-user: Gross errors using gsymcheck

["Gary L. Roach" <gary719_list1@xxxxxxxxxxx>]

Hi

I just ran gsymcheck on a schematic for a power supply and got the 
following:


gary@cruncher:~/gaf/PFC_1Kw_Regulator$ gsymcheck -vv PFC_1kwRegulatorP1.sch
gEDA/gsymcheck version 1.4.0.20080127
gEDA/symcheck comes with ABSOLUTELY NO WARRANTY; see COPYING for more 
details.
This is free software, and you are welcome to redistribute it under certain
conditions; please see the COPYING file for more details.


Checking: /home/gary/gaf/PFC_1Kw_Regulator/PFC_1kwRegulatorP1.sch
ERROR: Found wrongly attached attribute: [refdes=CONN101]
ERROR: Found wrongly attached attribute: [device=MAINS_ENTRY]
ERROR: Found wrongly attached attribute: [footprint=""]
ERROR: Found wrongly attached attribute: [symversion=1.0]
ERROR: Found wrongly attached attribute: [description=115V 60Hz ]
ERROR: Found wrongly attached attribute: [device=CAPACITOR]
ERROR: Found wrongly attached attribute: [refdes=C101]
ERROR: Found wrongly attached attribute: [symversion=0.1]
ERROR: Found wrongly attached attribute: [value=0.033 uf]
ERROR: Found wrongly attached attribute: [description=Panasonic 
ECQM4333KZ 0.033 uf 400WVDC +/- 10%]
ERROR: Found wrongly attached attribute: [footprint=""]
ERROR: Found wrongly attached attribute: [device=FUSE]
ERROR: Found wrongly attached attribute: [refdes=F101]
ERROR: Found wrongly attached attribute: [symversion=0.1]
ERROR: Found wrongly attached attribute: [value=15A]
ERROR: Found wrongly attached attribute: [footprint=""]
ERROR: Found wrongly attached attribute: [description=AGC Panel Mounted 
Holder]
ERROR: Found wrongly attached attribute: [refdes=U101]
ERROR: Found wrongly attached attribute: [device=DIODE-BRIDGE]
ERROR: Found wrongly attached attribute: [numslots=0]
ERROR: Found wrongly attached attribute: [description=GBPC1504  15A, 
400PIV Bridge Recifier by Diodes Inc.  Digikey P/N GBPC1504DI-ND $3.75/1]
ERROR: Found wrongly attached attribute: [footprint=""]
ERROR: Found wrongly attached attribute: [value=GBPC1504]

There were 118 errors. All components errored out. Almost all of the 
symbols used are from the library. While this part of the circuit is to 
be chassis built, I don't think that should make a difference at this 
stage. I have no idea what is wrong. Gattrib looks fine.

Thanks for any help in advance.

Gary Roach



_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user