gEDA-user: no raw file generated?

[Piter_ <x.piter@xxxxxxxxx>]

   Hi all
   I've got strange "problem" (?).
   This is my net file:
   * gnetlist -g spice-sdb -o [1]basic2n2222a.net basic2n2222a.sch
   *********************************************************
   * Spice file generated by gnetlist                      *
   * spice-sdb version 4.28.2007 by SDB --                 *
   * provides advanced spice netlisting capability.        *
   * Documentation at [2]http://www.brorson.com/gEDA/SPICE/   *
   *********************************************************
   *vvvvvvvv  Included SPICE model from
   /home/petro/GEDA/PROJECTS/BASIC_2N2222/modells/2N2222.mod vvvvvvvv
   * .model Q2N2222 NPN(IS=1E-14 VAF=100
   * +   BF=200 IKF=0.3 XTB=1.5 BR=3
   * +   CJC=8E-12 CJE=25E-12 TR=100E-9 TF=400E-12
   * +   ITF=1 VTF=2 XTF=3 RB=10 RC=3 RE=1 Vceo=30 Icrating=800m
   mfg=Philips)
   *^^^^^^^^  End of included SPICE model from
   /home/petro/GEDA/PROJECTS/BASIC_2N2222/modells/2N2222.mod ^^^^^^^^
   *2N2222A
   *Si 500mW  40V 800mA 300MHz pkg:TO-18 3,2,1
   .MODEL Q2N2222A NPN(IS=8.11E-14 BF=150 VAF=113 IKF=0.5 ISE=1.06E-11
   + NE=2 BR=4 VAR=24 IKR=0.225 RB=1.37 RE=0.343 RC=0.137 CJE=2.95E-11
   + TF=3.97E-10 CJC=1.52E-11 TR=8.5E-8 XTB=1.5 )
   *==============  Begin SPICE netlist of main design ============
   Q1 n2 n1 0 Q2N2222A
   Ibe 0 n1 DC 0.2mA
   Vce n2 0 DC 10
   .control
   dc Vce 0 12V 0.001 Ibe 0 150u 10u
   .endc
   .end
   And this is the command I run.
   ngspice -b [3]basic2n2222a.net -o basic2n2222a.out  -r
   basic2n2222a.raw
   but there  is no raw file generated.
   What do  I do wrong.
   Thanks.

References

   1. http://basic2n2222a.net/
   2. http://www.brorson.com/gEDA/SPICE/
   3. http://basic2n2222a.net/


_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user