Re: gEDA-user: lost newbie (less frustrated cos ive got somewhere)

[John Doty <jpd@xxxxxxxxxxxxx>]

On Jan 7, 2006, at 1:03 PM, Marc wrote:

> LED1 0 6 <No valid value attribute found>

The spice netlister thinks this is an inductor, because its refdes  
begins with L. Use D for a diode (but then you'd need a model). Or  
you could substitute a 200 ohm resistor for sim purposes.

> GND 0 <No valid value attribute found>

Not sure what you did here. I use the symbol gnd-1 from the power  
library and don't see this.

> L1 2 1 <No valid value attribute

Another inductor without a value.

> U2 ERROR_INVALID_PIN 0 7 0 ERROR_INVALID_PIN <No valid value  
> attribute found>

U indicates a distributed RC line to SPICE. For complex subcircuits  
you need X (and a subcircuit file to simulate whatever it does!).

> U1 1 0 3 <No valid value attribute found>

Ditto.

> ok im back down to 16 errors i ran a sim and it gave these errors  
> any ideas pls
>
> Marc :)

John Doty              Noqsi Aerospace, Ltd.
jpd@xxxxxxxxxxxxx