Well, since the 741 has only one "unit", include a "numslots=0" attribute to quiet the slotdef complaint. As to the "Number of pins does not match footprint size" complaint, you'll need to engage your brain and find out what's so objectionable about the footprint that it doesn't correspond to the symbol. At any rate, if you're only doing SPICE simulation, you can reasonably ignore any footprint complaints. As I've suggested earlier, gsymcheck is a little too anal for my purposes, and I use it to discover big mistakes rather than marginal technicalities. Marshall -----Original Message----- From: owner-geda-user@xxxxxxxx on behalf of Marc Sent: Sun 1/8/2006 1:46 PM To: geda-user@xxxxxxxx Subject: gEDA-user: lost newbie vs geDA Checking: /geda-test/share/gEDA/sym/linear/lm741-1.sym Warning: Number of pins does not match footprint size. ERROR: Invalid slotdef=1 attributes, not continuing 1 warnings found 1 ERROR found im getting there down from 12 errors Marc :)
<<winmail.dat>>