gEDA-user: Gnetlist -g PCB

["Thomas D. Dean" <tomdean@xxxxxxxxxxxxx>]

I am a newbie using PCB.  I created a schematic with footprints,
values, etc.

I used gnetlist -g drc2 and had one warning.

WARNING: Pin(s) with pintype 'input/output': R101:3 
        are connected by net 'GND'
        to pin(s) with pintype 'power': U101:7 

I used gsch2pcb and then pcb.  I recieved an error about pins numbered
'n1' and 'n2.

I used gnetlist -g PCB and saw the n1 and n2 pin numbers in
output.net.  I also see pins like n+ and n-.

output.net is below.  I can post the schematic, if it will help.

In pcb, none of the resistors or capacitors are connected with the
ratsnest.

What am I doing wrong? 

tomdean

G_CS    J107-4 J104-15 
ADC6    J106-6 J104-6 
R/W     J105-5 J104-9 
ADC4    J106-2 J104-4 
ADC5    J106-4 J104-3 
ADC2    R104-n2 R103-n1 J104-2 
unnamed_net2    R102-n1 R101-1 
unnamed_net1    J105-3 R101-2 
DAT7    J105-14 U101-13 
DAT6    J105-13 U101-12 
DAT5    J105-12 U101-11 
DAT4    J105-11 U101-10 
DAT3    J105-10 U101-6 
DAT2    J105-9 U101-5 
DAT1    J105-8 U101-4 
DAT0    J105-7 U101-3 
+12V    R104-n1 J103-15 
R_PULSE J108-3 J103-6 
R_INT   J108-2 J103-7 
E1      J105-6 J103-8 
LCD_CS  U101-2 J103-9 
RS      J105-4 J103-5 
TXD     J104-14 J102-4 
RXD     J104-13 J102-3 
SCK     J107-3 U101-8 J103-12 J101-6 
A_CS    J104-10 J101-7 
MOSI    J107-6 U101-1 J103-10 J101-5 
Vcc     J108-1 C105-n+ C103-n+ J107-1 C101-n+ J105-1 J104-7 R102-n2 U101-14 U101-9 J103-3 C104-n- J102-2 C102-n+ J101-1 
MISO    J107-5 J103-11 J101-4 
IO      J108-4 J104-16 J104-11 J104-12 J104-5 J104-1 J103-14 J103-1 J103-2 J102-6 J102-7 J102-9 J102-10 J101-8 J101-3 
GND     J108-5 C105-n- R103-n2 C103-n- J107-2 J106-5 J106-1 J106-3 C101-n- J105-2 J104-8 R101-3 U101-7 J103-16 J103-13 J103-4 J102-8 J102-5 C104-n+ J102-1 C102-n- J101-2 


_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user