[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: double side edge conector

To: geda-user@xxxxxxxx
Subject: Re: gEDA-user: double side edge conector
From: DJ Delorie <dj@xxxxxxxxxxx>
Date: Mon, 13 Mar 2006 23:00:45 -0500
Delivered-to: archiver@seul.org
Delivered-to: geda-user-outgoing@seul.org
Delivered-to: geda-user@seul.org
Delivery-date: Mon, 13 Mar 2006 23:00:58 -0500
In-reply-to: <44163E6E.3080904@soupacific.com> (message from hiroshi on Tue, 14 Mar 2006 12:54:22 +0900)
References: <44162C5C.4070100@mcmahill.net> <44163E6E.3080904@soupacific.com>
Reply-to: geda-user@xxxxxxxx
Sender: owner-geda-user@xxxxxxxx

> What "auto,edge2" stands for ?

auto should be onsolder (they share a bit), which means it's on the
solder side of the board.  I'll fix it shortly.

@item 0x0080 onsolder
For elements, indicates that the element is on the solder side.

@item 0x4000 edge2
For pads, indicates that the second point is closer to the edge.  For
pins, indicates that the pin is closer to a horizontal edge and thus
pinout text should be vertical.

http://pcb.sourceforge.net/pcb-cvs.html/Object-Flags.html

References:
- gEDA-user: footprint= values
  - From: Dan McMahill
- gEDA-user: double side edge conector
  - From: hiroshi

Prev by Author: Re: gEDA-user: "Open Pinout Menu" issue?
Next by Author: Re: gEDA-user: PCB text/symbol sizes
Previous by thread: gEDA-user: double side edge conector
Next by thread: Re: gEDA-user: double side edge conector
Index(es):
- Author
- Thread