Re: gEDA-user: pcb doesn't find my pins

[Jim <jim@xxxxxxxxx>]

Here I thought I was OK.  Something screwy is going on here.

No complaints from  pcb, log looks just fine.  Gsch2pcb ran fine.  
Attached are the schematic and the PCB.  I couldn't figure out why the 
rat lines kept overlaying.  When I did an autoroute it became clear.  
The device are shorted out!

Here's the footprint for C1

Element["" "Res/Cap" "axial300" "" 0 0 -15000 -13500 0 100 ""]
(
 Pin[-15000 0 4000 2000 5200 2500 "1" "1" "square"]
 Pin[15000 0 4000 2000 5200 2500 "2" "2" ""]
 ElementLine[-13500 -6000 -13500 -3500 1000]
 ElementLine[-13500 6000 -13500 3500 1000]
 ElementLine[-13500 -6000 13500 -6000 1000]
 ElementLine[13500 -6000 13500 -3500 1000]
 ElementLine[13500 6000 13500 3500 1000]
 ElementLine[13500 6000 -13500 6000 1000]
 Attribute("name" "axial300")
 Attribute("dist-license" "GPL")
 Attribute("use-license" "unlimited")
 Attribute("description" "Axial SIL")
 Attribute("desc" "Res/Cap")
)

Here's the footprint for the regulator:

Element["" "Three terminal regulator" "LD1117" "" 0 0 -17500 -12500 0 
100 ""]
(
 Pin[-10000 0 3000 2000 4200 2010 "Gnd" "1" "octagon"]
 Pin[0 0 3000 2000 4200 2010 "Out" "2" ""]
 Pin[10000 0 3000 2000 4200 2010 "In" "3" ""]
 ElementLine[-17500 -2750 -17500 5000 1000]
 ElementLine[-15250 -5000 17500 -5000 1000]
 ElementLine[-17500 -2750 -15250 -5000 1000]
 ElementLine[17500 5000 17500 -5000 1000]
 ElementLine[17500 5000 -17500 5000 1000]
 Attribute("name" "LD1117")
 Attribute("author" "Jim Lynch`")
 Attribute("email" "jim@xxxxxxxxxxxxxxxxxx")
 Attribute("dist-license" "GPL")
 Attribute("use-license" "unlimited")
 Attribute("date" "20100306")
 Attribute("description" "Three terminal regulator")
 Attribute("desc" "Three terminal regulator")
)

What the heck is going on?

Thanks for any advice, I'm really confused now.  And things were going 
so well.  :(

Jim.

_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user