Re: gEDA-user: gschem: How to connect two nets from different sheet

[John Doty <jpd@xxxxxxxxx>]

On Oct 6, 2008, at 1:18 AM, Wojciech Zabolotny wrote:

>> Do you really need multiple netnames for the same net?
>>
>> I did it this way, see
>>
>> http://www.ssalewski.de/Controller.pdf
>>
>> My Connector has pin names like MOSI.
>>
>> I use a io.sym symbol with attribute net=uC_MOSI:1  and connect this
>> symbol to the pin of the connector and to the Microcontroller.
>>
>> I use no netname= attribute in all my 18-pages schematic.
>>
>
> OK. I've tried to use the passive-1.sym
> The results are as previously.
> Please see the attached archive. If there is a testpoint
> (interconnections2.sch), everything is fine (test2.net), when there is
> only interconnections between two passive-1 blocks - no connection is
> generated in the netlist.
> It looks like a real bug in the gnetlist :-(.
>

Your problem is that you're trying to hang two names on one net.  
There is no support for this, and no definition of what should happen  
if you try.

John Doty              Noqsi Aerospace, Ltd.
http://www.noqsi.com/
jpd@xxxxxxxxx




_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user