[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: gEDA-user: buzzing board
> take your 3.3 volt bench supply and bypass the 3.3v switcher.
No change!
I took out the switcher and wired an LDO into the test points, same
symptoms as before.
The LDO got hot, which is why I went with a switcher - it's got to
drop 12-17v down to 3.3v with enough current to drive the cpu,
ethernet, mp3 chip, eeproms, and oled logic.
But the board worked, and still buzzed.
So, it's NOT the inductors!
Whew.
_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user