[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
[tor-commits] [translation/liveusb-creator] https://gitweb.torproject.org/translation.git/commit/?h=liveusb-creator
commit 3ae84fb1f0f70c145e1d64eeeea90405f5159b7e
Author: Translation commit bot <translation@xxxxxxxxxxxxxx>
Date: Sun Oct 27 02:46:11 2019 +0000
https://gitweb.torproject.org/translation.git/commit/?h=liveusb-creator
---
da/da.po | 216 +++++++++++++++++++++++++++++++--------------------------------
1 file changed, 108 insertions(+), 108 deletions(-)
diff --git a/da/da.po b/da/da.po
index 6c613713f..cbeb127d4 100644
--- a/da/da.po
+++ b/da/da.po
@@ -20,9 +20,9 @@ msgid ""
msgstr ""
"Project-Id-Version: Tor Project\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-04-13 08:42+0200\n"
-"PO-Revision-Date: 2019-04-14 07:52+0000\n"
-"Last-Translator: Emma Peel\n"
+"POT-Creation-Date: 2019-10-21 09:03+0200\n"
+"PO-Revision-Date: 2019-10-27 02:36+0000\n"
+"Last-Translator: scootergrisen\n"
"Language-Team: Danish (http://www.transifex.com/otf/torproject/language/da/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -32,295 +32,295 @@ msgstr ""
#: ../tails_installer/creator.py:100
msgid "You must run this application as root"
-msgstr ""
+msgstr "Du skal køre dette program som root"
#: ../tails_installer/creator.py:146
msgid "Extracting live image to the target device..."
-msgstr ""
+msgstr "Udpakker det direkte foto til den valgte enhed..."
#: ../tails_installer/creator.py:153
#, python-format
msgid "Wrote to device at %(speed)d MB/sec"
-msgstr ""
+msgstr "Skrev til enhed med %(speed)d MB/s"
#: ../tails_installer/creator.py:296
#, python-format
msgid ""
"There was a problem executing the following command: `%(command)s`.\n"
"A more detailed error log has been written to '%(filename)s'."
-msgstr ""
+msgstr "Der opstod et problem under kørsel af følgende kommando: \"%(command)s\".\nEn mere detaljeret fejllog er blevet skrevet til \"%(filename)s\"."
#: ../tails_installer/creator.py:315
msgid "Verifying SHA1 checksum of LiveCD image..."
-msgstr ""
+msgstr "Verificerer SHA1-kontrolsum af LiveCD-aftrykket..."
#: ../tails_installer/creator.py:319
msgid "Verifying SHA256 checksum of LiveCD image..."
-msgstr ""
+msgstr "Verificerer SHA256-kontrolsum af LiveCD-aftrykket..."
#: ../tails_installer/creator.py:335
msgid ""
"Error: The SHA1 of your Live CD is invalid. You can run this program with "
"the --noverify argument to bypass this verification check."
-msgstr ""
+msgstr "Fejl: SHA1'et på din live-CD er ugyldig. Du kan køre dette program med \"--noverify\"-argumentet for at springe over denne verificeringskontrol."
#: ../tails_installer/creator.py:341
msgid "Unknown ISO, skipping checksum verification"
-msgstr ""
+msgstr "Ukendt ISO, undlader verifikation af kontrolsum"
#: ../tails_installer/creator.py:353
#, python-format
msgid ""
"Not enough free space on device.\n"
"%dMB ISO + %dMB overlay > %dMB free space"
-msgstr ""
+msgstr "Der er ikke tilstrækkelig ledig plads på enheden.\n%dMB ISO + %dMB ekstra > %dMB fri plads"
#: ../tails_installer/creator.py:360
#, python-format
msgid "Creating %sMB persistent overlay"
-msgstr ""
+msgstr "Opretter %sMB vedvarende overlæg"
#: ../tails_installer/creator.py:421
#, python-format
msgid "Unable to copy %(infile)s to %(outfile)s: %(message)s"
-msgstr ""
+msgstr "Kan ikke kopiere %(infile)s til %(outfile)s: %(message)s"
#: ../tails_installer/creator.py:435
msgid "Removing existing Live OS"
-msgstr ""
+msgstr "Fjerner eksisterende Live OS"
#: ../tails_installer/creator.py:444 ../tails_installer/creator.py:457
#, python-format
msgid "Unable to chmod %(file)s: %(message)s"
-msgstr ""
+msgstr "Kan ikke chmod %(file)s: %(message)s"
#: ../tails_installer/creator.py:450
#, python-format
msgid "Unable to remove file from previous LiveOS: %(message)s"
-msgstr ""
+msgstr "Kan ikke fjerne fil fra tidligere LiveOS: %(message)s"
#: ../tails_installer/creator.py:464
#, python-format
msgid "Unable to remove directory from previous LiveOS: %(message)s"
-msgstr ""
+msgstr "Kan ikke fjerne mappe fra tidligere LiveOS: %(message)s"
#: ../tails_installer/creator.py:512
#, python-format
msgid "Cannot find device %s"
-msgstr ""
+msgstr "Kan ikke finde enhed %s"
#: ../tails_installer/creator.py:713
#, python-format
msgid "Unable to write on %(device)s, skipping."
-msgstr ""
+msgstr "Kan ikke skrive til %(device)s, springer over."
#: ../tails_installer/creator.py:743
#, python-format
msgid ""
"Some partitions of the target device %(device)s are mounted. They will be "
"unmounted before starting the installation process."
-msgstr ""
+msgstr "Nogle partitioner på den valgte enhed %(device)s er monteret. De afmonteres før installationensprocessen."
#: ../tails_installer/creator.py:786 ../tails_installer/creator.py:1010
msgid "Unknown filesystem. Your device may need to be reformatted."
-msgstr ""
+msgstr "Ukendt filsystem. Din enhed skal måske formateres igen."
#: ../tails_installer/creator.py:789 ../tails_installer/creator.py:1013
#, python-format
msgid "Unsupported filesystem: %s"
-msgstr ""
+msgstr "Filsystem understøttes ikke: %s"
#: ../tails_installer/creator.py:807
#, python-format
msgid "Unknown GLib exception while trying to mount device: %(message)s"
-msgstr ""
+msgstr "Ukendt GLib-undtagelse ved forsøg på at montere enhed: %(message)s"
#: ../tails_installer/creator.py:812
#, python-format
msgid "Unable to mount device: %(message)s"
-msgstr ""
+msgstr "Kan ikke tilslutte enhed: %(message)s"
#: ../tails_installer/creator.py:817
msgid "No mount points found"
-msgstr ""
+msgstr "Fandt ingen tilslutningspunkter"
#: ../tails_installer/creator.py:828
#, python-format
msgid "Entering unmount_device for '%(device)s'"
-msgstr ""
+msgstr "Starter afmontering for \"%(device)s\""
#: ../tails_installer/creator.py:838
#, python-format
msgid "Unmounting mounted filesystems on '%(device)s'"
-msgstr ""
+msgstr "Afmonterer monterede filsystemer på \"%(device)s\""
#: ../tails_installer/creator.py:842
#, python-format
msgid "Unmounting '%(udi)s' on '%(device)s'"
-msgstr ""
+msgstr "Afmonterer \"%(udi)s\" på \"%(device)s\""
#: ../tails_installer/creator.py:853
#, python-format
msgid "Mount %s exists after unmounting"
-msgstr ""
+msgstr "Tilslutning %s eksisterer efter frakobling"
#: ../tails_installer/creator.py:866
#, python-format
msgid "Partitioning device %(device)s"
-msgstr ""
+msgstr "Partitionerer enheden %(device)s"
#: ../tails_installer/creator.py:995
#, python-format
msgid "Unsupported device '%(device)s', please report a bug."
-msgstr ""
+msgstr "Enheden \"%(device)s\" understøttes ikke. Rapportér venligst en fejl."
#: ../tails_installer/creator.py:998
msgid "Trying to continue anyway."
-msgstr ""
+msgstr "Prøver at forsætte alligevel."
#: ../tails_installer/creator.py:1007 ../tails_installer/creator.py:1405
msgid "Verifying filesystem..."
-msgstr ""
+msgstr "Verificerer filsystem..."
#: ../tails_installer/creator.py:1031
#, python-format
msgid "Unable to change volume label: %(message)s"
-msgstr ""
+msgstr "Kan ikke ændre drev-navn: %(message)s"
#: ../tails_installer/creator.py:1037 ../tails_installer/creator.py:1440
msgid "Installing bootloader..."
-msgstr ""
+msgstr "Installerer opstartsindlæser..."
#: ../tails_installer/creator.py:1064
#, python-format
msgid "Could not find the '%s' COM32 module"
-msgstr ""
+msgstr "Kunne ikke finde '%s' COM32-modulet"
#: ../tails_installer/creator.py:1072 ../tails_installer/creator.py:1458
#, python-format
msgid "Removing %(file)s"
-msgstr ""
+msgstr "Fjerner %(file)s"
#: ../tails_installer/creator.py:1186
#, python-format
msgid "%s already bootable"
-msgstr ""
+msgstr "%s er allerede i stand til at starte"
#: ../tails_installer/creator.py:1206
msgid "Unable to find partition"
-msgstr ""
+msgstr "Kan ikke finde partition"
#: ../tails_installer/creator.py:1229
#, python-format
msgid "Formatting %(device)s as FAT32"
-msgstr ""
+msgstr "Formatterer %(device)s som FAT32"
#: ../tails_installer/creator.py:1289
msgid "Could not find syslinux' gptmbr.bin"
-msgstr ""
+msgstr "Kunne ikke finde syslinux' gptmbr.bin"
#: ../tails_installer/creator.py:1302
#, python-format
msgid "Reading extracted MBR from %s"
-msgstr ""
+msgstr "Læser udtrukket MBR fra %s"
#: ../tails_installer/creator.py:1306
#, python-format
msgid "Could not read the extracted MBR from %(path)s"
-msgstr ""
+msgstr "Kunne ikke læse den udtrukne MBR fra %(path)s"
#: ../tails_installer/creator.py:1319 ../tails_installer/creator.py:1320
#, python-format
msgid "Resetting Master Boot Record of %s"
-msgstr ""
+msgstr "Nulstiller Master Boot Record for %s"
#: ../tails_installer/creator.py:1325
msgid "Drive is a loopback, skipping MBR reset"
-msgstr ""
+msgstr "Drevet er et loopback, springer nulstilling af MBR over"
#: ../tails_installer/creator.py:1329 ../tails_installer/creator.py:1589
#, python-format
msgid "Calculating the SHA1 of %s"
-msgstr ""
+msgstr "Beregner SHA1 for %s"
#: ../tails_installer/creator.py:1354
msgid "Synchronizing data on disk..."
-msgstr ""
+msgstr "Synkroniserer data på disk..."
#: ../tails_installer/creator.py:1397
msgid "Error probing device"
-msgstr ""
+msgstr "Fejl ved undersøgelse af enhed"
#: ../tails_installer/creator.py:1399
msgid "Unable to find any supported device"
-msgstr ""
+msgstr "Kan ikke finde nogen understøttede enheder"
#: ../tails_installer/creator.py:1409
msgid ""
"Make sure your USB key is plugged in and formatted with the FAT filesystem"
-msgstr ""
+msgstr "Sørg for at din USB-nøgle er sæt i og formateret med FAT-filsystemet"
#: ../tails_installer/creator.py:1412
#, python-format
msgid ""
"Unsupported filesystem: %s\n"
"Please backup and format your USB key with the FAT filesystem."
-msgstr ""
+msgstr "Filsystem understøttes ikke: %s\nForetag venligst en sikkerhedskopi og formatér din USB-nøgle med FAT-filsystemet."
#: ../tails_installer/creator.py:1481
msgid ""
"Unable to get Win32_LogicalDisk; win32com query did not return any results"
-msgstr ""
+msgstr "Kan ikke få Win32_LogicalDisk; win32com forespørgslen returnerede ingen resultater"
#: ../tails_installer/creator.py:1536
msgid "Cannot find"
-msgstr ""
+msgstr "Kan ikke finde"
#: ../tails_installer/creator.py:1537
msgid ""
"Make sure to extract the entire tails-installer zip file before running this"
" program."
-msgstr ""
+msgstr "Sørg for at udtrække hele tails-installationsprogram zip-filen inden dette program køres."
#: ../tails_installer/gui.py:69
#, python-format
msgid "Unknown release: %s"
-msgstr ""
+msgstr "Ukendt udgivelse: %s"
#: ../tails_installer/gui.py:73
#, python-format
msgid "Downloading %s..."
-msgstr ""
+msgstr "Downloader %s..."
#: ../tails_installer/gui.py:213
msgid ""
"Error: Cannot set the label or obtain the UUID of your device. Unable to "
"continue."
-msgstr ""
+msgstr "Fejl: Kan ikke sætte etiket eller finde enhedens UUID. Kan ikke fortsætte."
#: ../tails_installer/gui.py:260
#, python-format
msgid "Installation complete! (%s)"
-msgstr ""
+msgstr "Installation færdig! (%s)"
#: ../tails_installer/gui.py:265
msgid "Tails installation failed!"
-msgstr ""
+msgstr "Tails installation mislykkedes!"
#: ../tails_installer/gui.py:369
msgid ""
"Warning: This tool needs to be run as an Administrator. To do this, right "
"click on the icon and open the Properties. Under the Compatibility tab, "
"check the \"Run this program as an administrator\" box."
-msgstr ""
+msgstr "Advarsel: Dette værktøj skal køres som en administrator. For dette, højreklik på ikonet og åbn egenskaberne. Under kompatibilitetsfanebladet afkrydses boksen »Kør dette program som en administrator«."
#: ../tails_installer/gui.py:381
msgid "Tails Installer"
-msgstr ""
+msgstr "Tails-installationsprogram"
#: ../tails_installer/gui.py:441
msgid "Tails Installer is deprecated in Debian"
-msgstr ""
+msgstr "Tails-installationsprogram er udgået i Debian"
#: ../tails_installer/gui.py:443
msgid ""
@@ -329,62 +329,62 @@ msgid ""
"\n"
"To upgrade Tails, do an automatic upgrade from Tails or a manual upgrade from Debian using a second USB stick.\n"
"<a href='https://tails.boum.org/upgrade/tails-overview'>See the manual upgrade instructions</a>"
-msgstr ""
+msgstr "Brug i stedet GNOME Diske for at installere Tails fra bunden.\n<a href='https://tails.boum.org/install/linux/usb-overview'>Se instruktionerne til installation</a>\n\nOpgrader Tails ved at foretage en automatisk opgradering fra Tails eller en manual opgradering fra Debian med en anden USB-pen.\n<a href='https://tails.boum.org/upgrade/tails-overview'>Se instruktionerne til manuel opgradering</a>"
#: ../tails_installer/gui.py:450 ../data/tails-installer.ui.h:2
msgid "Clone the current Tails"
-msgstr ""
+msgstr "Klon den nuværende Tails"
#: ../tails_installer/gui.py:457 ../data/tails-installer.ui.h:3
msgid "Use a downloaded Tails ISO image"
-msgstr ""
+msgstr "Brug et downloadet Tails ISO-aftryk"
#: ../tails_installer/gui.py:494 ../tails_installer/gui.py:815
msgid "Upgrade"
-msgstr ""
+msgstr "Opgrader"
#: ../tails_installer/gui.py:496
msgid "Manual Upgrade Instructions"
-msgstr ""
+msgstr "Instruktioner til manuel opgradering"
#: ../tails_installer/gui.py:498
msgid "https://tails.boum.org/upgrade/";
-msgstr ""
+msgstr "https://tails.boum.org/upgrade/";
#: ../tails_installer/gui.py:506 ../tails_installer/gui.py:727
#: ../tails_installer/gui.py:792 ../data/tails-installer.ui.h:7
msgid "Install"
-msgstr ""
+msgstr "Installer"
#: ../tails_installer/gui.py:509 ../data/tails-installer.ui.h:1
msgid "Installation Instructions"
-msgstr ""
+msgstr "Installationsinstruktioner"
#: ../tails_installer/gui.py:511
msgid "https://tails.boum.org/install/";
-msgstr ""
+msgstr "https://tails.boum.org/install/";
#: ../tails_installer/gui.py:517
#, python-format
msgid "%(size)s %(vendor)s %(model)s device (%(device)s)"
-msgstr ""
+msgstr "%(size)s %(vendor)s %(model)s enhed (%(device)s)"
#: ../tails_installer/gui.py:529
msgid "No ISO image selected"
-msgstr ""
+msgstr "Ingen ISO-aftryk valgt"
#: ../tails_installer/gui.py:530
msgid "Please select a Tails ISO image."
-msgstr ""
+msgstr "Vælg venligst et Tails ISO-aftryk."
#: ../tails_installer/gui.py:572
msgid "No device suitable to install Tails could be found"
-msgstr ""
+msgstr "Der kunne ikke findes nogen egnet enhed til installation af Tails"
#: ../tails_installer/gui.py:574
#, python-format
msgid "Please plug a USB flash drive or SD card of at least %0.1f GB."
-msgstr ""
+msgstr "Sæt venligst et USB-flash-drev eller SD-kort i på mindst %0.1f GB."
#: ../tails_installer/gui.py:608
#, python-format
@@ -392,49 +392,49 @@ msgid ""
"The USB stick \"%(pretty_name)s\" is configured as non-removable by its "
"manufacturer and Tails will fail to start from it. Please try installing on "
"a different model."
-msgstr ""
+msgstr "USB-pennen \"%(pretty_name)s\" er konfigureret som ikke-flytbar af dens producent og Tails vil ikke kunne start fra den. Prøv venligst at installere en anden model."
#: ../tails_installer/gui.py:618
#, python-format
msgid ""
"The device \"%(pretty_name)s\" is too small to install Tails (at least "
"%(size)s GB is required)."
-msgstr ""
+msgstr "Enheden \"%(pretty_name)s\" har ikke plads nok til at installere Tails (kræver mindst %(size)s GB)."
#: ../tails_installer/gui.py:631
#, python-format
msgid ""
"To upgrade device \"%(pretty_name)s\" from this Tails, you need to use a downloaded Tails ISO image:\n"
"https://tails.boum.org/install/download";
-msgstr ""
+msgstr "For at opgradere enheden \"%(pretty_name)s\" fra denne Tails, skal du bruge et downloadet Tails ISO-aftryk:\nhttps://tails.boum.org/install/download";
#: ../tails_installer/gui.py:652
msgid "An error happened while installing Tails"
-msgstr ""
+msgstr "Der opstod fejl ved installation af Tails"
#: ../tails_installer/gui.py:664
msgid "Refreshing releases..."
-msgstr ""
+msgstr "Genopfrisker udgivelser..."
#: ../tails_installer/gui.py:669
msgid "Releases updated!"
-msgstr ""
+msgstr "Udgivelser opdateret!"
#: ../tails_installer/gui.py:722
msgid "Installation complete!"
-msgstr ""
+msgstr "Installation færdig!"
#: ../tails_installer/gui.py:738
msgid "Cancel"
-msgstr ""
+msgstr "Annullér"
#: ../tails_installer/gui.py:774
msgid "Unable to mount device"
-msgstr ""
+msgstr "Kan ikke tilslutte enhed"
#: ../tails_installer/gui.py:781 ../tails_installer/gui.py:814
msgid "Confirm the target USB stick"
-msgstr ""
+msgstr "Bekræft mål USB-pennen"
#: ../tails_installer/gui.py:782
#, python-format
@@ -442,62 +442,62 @@ msgid ""
"%(size)s %(vendor)s %(model)s device (%(device)s)\n"
"\n"
"All data on this USB stick will be lost."
-msgstr ""
+msgstr "%(size)s %(vendor)s %(model)s enhed (%(device)s)\n\nAl data på denne USB-pen vil gå tabt."
#: ../tails_installer/gui.py:801
#, python-format
msgid "%(parent_size)s %(vendor)s %(model)s device (%(device)s)"
-msgstr ""
+msgstr "%(parent_size)s %(vendor)s %(model)s enhed (%(device)s)"
#: ../tails_installer/gui.py:809
msgid ""
"\n"
"\n"
"The persistent storage on this USB stick will be preserved."
-msgstr ""
+msgstr "\n\nDet vedvarende lager på denne USB-pen vil blive bevaret."
#: ../tails_installer/gui.py:810
#, python-format
msgid "%(description)s%(persistence_message)s"
-msgstr ""
+msgstr "%(description)s%(persistence_message)s"
#: ../tails_installer/gui.py:853
msgid "Download complete!"
-msgstr ""
+msgstr "Download udført!"
#: ../tails_installer/gui.py:857
msgid "Download failed: "
-msgstr ""
+msgstr "Download fejlede: "
#: ../tails_installer/gui.py:858
msgid "You can try again to resume your download"
-msgstr ""
+msgstr "Du kan prøve at genoptage din download"
#: ../tails_installer/gui.py:866
msgid ""
"The selected file is unreadable. Please fix its permissions or select "
"another file."
-msgstr ""
+msgstr "Den valgte fil er ikke læsbar. Du kan enten ændre filtilladelserne eller vælge en anden fil."
#: ../tails_installer/gui.py:872
msgid ""
"Unable to use the selected file. You may have better luck if you move your "
"ISO to the root of your drive (ie: C:\\)"
-msgstr ""
+msgstr "Kan ikke bruge den valgte fil. Prøv i stedet at flytte din ISO til roden af dit drev (dvs. C:\\)"
#: ../tails_installer/gui.py:878
#, python-format
msgid "%(filename)s selected"
-msgstr ""
+msgstr "%(filename)s valgt"
#: ../tails_installer/source.py:29
msgid "Unable to find LiveOS on ISO"
-msgstr ""
+msgstr "Kan ikke finde LiveOS på ISO"
#: ../tails_installer/source.py:35
#, python-format
msgid "Could not guess underlying block device: %s"
-msgstr ""
+msgstr "Kunne ikke gætte underliggende blokenhed: %s"
#: ../tails_installer/source.py:50
#, python-format
@@ -505,42 +505,42 @@ msgid ""
"There was a problem executing `%s`.\n"
"%s\n"
"%s"
-msgstr ""
+msgstr "Der opstod et problem ved eksekvering af `%s`.\n%s\n%s"
#: ../tails_installer/source.py:64
#, python-format
msgid "'%s' does not exist"
-msgstr ""
+msgstr "'%s' findes ikke"
#: ../tails_installer/source.py:66
#, python-format
msgid "'%s' is not a directory"
-msgstr ""
+msgstr "'%s' er ikke en mappe"
#: ../tails_installer/source.py:76
#, python-format
msgid "Skipping '%(filename)s'"
-msgstr ""
+msgstr "Springer '%(filename)s' over"
#: ../tails_installer/utils.py:55
#, python-format
msgid ""
"There was a problem executing `%s`.%s\n"
"%s"
-msgstr ""
+msgstr "Der opstod et problem ved eksekvering af `%s`.%s\n%s"
#: ../tails_installer/utils.py:135
msgid "Could not open device for writing."
-msgstr ""
+msgstr "Kunne ikke åbne enhed til skrivning."
#: ../data/tails-installer.ui.h:4
msgid "Select a distribution to download:"
-msgstr ""
+msgstr "Vælg en distribution som skal downloades:"
#: ../data/tails-installer.ui.h:5
msgid "Target USB stick:"
-msgstr ""
+msgstr "MÃ¥l USB-pen:"
#: ../data/tails-installer.ui.h:6
msgid "Reinstall (delete all data)"
-msgstr ""
+msgstr "Geninstaller (slet al data)"
_______________________________________________
tor-commits mailing list
tor-commits@xxxxxxxxxxxxxxxxxxxx
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-commits