[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: Next spin of CD installer available

To: geda-user@xxxxxxxx
Subject: Re: gEDA-user: Next spin of CD installer available
From: Daniel J Wisehart <dw@xxxxxxxxxxxxx>
Date: Sun, 28 Aug 2005 02:40:04 -0700
Delivered-to: archiver@seul.org
Delivered-to: geda-user-outgoing@seul.org
Delivered-to: geda-user@seul.org
Delivery-date: Sun, 28 Aug 2005 05:43:13 -0400
In-reply-to: <20050827162112.BD0E02AA07@earl-grey.cloud9.net>
References: <20050827162112.BD0E02AA07@earl-grey.cloud9.net>
Reply-to: geda-user@xxxxxxxx
Sender: owner-geda-user@xxxxxxxx
User-agent: KMail/1.6.2

That is fine, Stuart.

Everything compiled and installed up to PCB.  PCB failed:

checking for gtk+-2.0 >= 2.4.0... Requested 'gtk+-2.0 >= 2.4.0' but version of 
GTK+ is 2.2.4 
configure: error: Cannot find gtk+ >= 2.4.0, install it and rerun ./configure 
Failure executing command ./configure --prefix=/usr/local/bin/geda-install, 
ReturnCode = 1

I wish I knew where to get the gtk binary release for SuSE 9.1.  Building it 
from the sources does not sound fun.

Regards,
Daniel



On Saturday 27 August 2005 09:21, Stuart Brorson wrote:
> Daniel --
>
> Thanks for the report.  Do you mind if I stick this note into teh
> INSTALL.SuSE file?
>
> Also, I remain a little bit concerned.  When I create the CD, I
> "freeze" the python stuff, and create an executable "install.exe",
> which is supposed to have all dependencies wrapped up in it.  (The
> shell script "install" just calls this executable.)  Therefore, if you
> got the installer to work by installing some new stuff, it suggeests
> that the freeze process doesn't do 100% of the job.
>
> I will look into this.  Meanwhile, please do let us know of your
> success/failure.
>
> Finally, the installer does check for wxGTK's version.  I think you
> need 2.5.2 or above, but I don't recall.  You can loook at the source
> -- install.py -- to see what version is required.
>
> Stuart
>
> > Hello Stuart,
> >
> > I have the GUI from the 20050823 installer working on the install now.  I
> > noticed that my machine had libglade2, but not libglade or glade, so I
> > installed them.  When I did Yast2 picked up a bunch of Gnome dependencies
> > that I also needed.  Then I re-ran the pango-querymodules program.  The
> > next time I tried the installer it started up just fine.
> >
> > I had already installed wxGTK, but the installer decided it needed to
> > install it--a later version?--again.  It took quite a while, but it did
> > not time out even though I was using the 0823 installer.
> >
> > At the moment the installer is installing a bunch of connector symbols. 
> > I should know fairly soon if it is going to succeed or not.
> >
> > More later,
> > Daniel
> >
> > On Friday 26 August 2005 07:36, Stuart Brorson wrote:
> > > This is interesting.  I last used glade on a newer machine, which
> > > placed a bunch of new GTK properties into the glade file.  THen I
> > > froze the distribution on an older machine, which may not recognize
> > > new glade stuff.  It should just give you warnings, though.
> > >
> > > *Sigh*  Version skew is one of the problems Linux has
> > > w.r.t. mainstream adoption.  Trying to create portable software for
> > > Linux is more difficult than for Windoze because Linux developers
> > > aren't as concerned with maintaining backward compatability as they
> > > are with implementing the latest gee-whiz kewl feature.
> > >
> > > I will try to fix this issue over the weekend.
> > >
> > > Stuart
> > >
> > > > Hello Stuart,
> > > >
> > > > Many thanks for creating the installer 20050825.  Unfortunately, it
> > > > is failing for me on Suse 9.1.  When I run /media/cdrom/installer
> > > > --log I see:
> > > >
> > > >
> > > > (installer.exe:25431): libglade-WARNING **: unknown property
> > > > `decorated' for class `GtkWindow'
> > > >
> > > > (installer.exe:25431): libglade-WARNING **: unknown property
> > > > `gravity' for class `GtkWindow'
> > > >
> > > > (installer.exe:25431): libglade-WARNING **: unknown property
> > > > `overwrite' for class `GtkTextView'
> > > >
> > > > (installer.exe:25431): libglade-WARNING **: unknown property
> > > > `accepts_tab' for class `GtkTextView'
> > > >
> > > > (installer.exe:25431): Pango-WARNING **: No builtin or dynamically
> > > > loaded modules
> > > > were found. Pango will not work correctly. This probably means
> > > > there was an error in the creation of:
> > > >   '/usr/local/etc/pango/pango.modules'
> > > > You may be able to recreate this file by running pango-querymodules.
> > > >
> > > > (installer.exe:25431): GLib-GObject-CRITICAL **: g_object_ref:
> > > > assertion `G_IS_OBJECT (object)' failed
> > > >
> > > > (installer.exe:25431): Pango-CRITICAL **: _pango_engine_shape_shape:
> > > > assertion `PANGO_IS_FONT (font)' failed
> > > >
> > > > Pango-ERROR **: file shape.c: line 75 (pango_shape): assertion
> > > > failed: (glyphs->num_glyphs > 0)
> > > > aborting...
> > > > /media/cdrom/installer: line 25: 25431 Aborted                
> > > > `dirname $0`/installer.exe $1 $2
> > > >
> > > >
> > > > So then I ran pango-querymodules and I see:
> > > >
> > > >
> > > > # Pango Modules file
> > > > # Automatically generated file, do not edit
> > > > #
> > > > # ModulesPath = /usr/local/lib/pango/1.4.0/modules
> > > > #
> > > > /usr/local/lib/pango/1.4.0/modules/pango-basic-x.so
> > > > BasicScriptEngineX PangoEngineShape PangoRenderX common:
> > > > /usr/local/lib/pango/1.4.0/modules/pango-thai-fc.so
> > > > ThaiScriptEngineFc PangoEngineShape PangoRenderFc thai:* lao:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-arabic-fc.so
> > > > ArabicScriptEngineFc PangoEngineShape PangoRenderFc arabic:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > devaScriptEngineFc PangoEngineShape PangoRenderFc devanagari:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > bengScriptEngineFc PangoEngineShape PangoRenderFc bengali:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > guruScriptEngineFc PangoEngineShape PangoRenderFc gurmukhi:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > gujrScriptEngineFc PangoEngineShape PangoRenderFc gujarati:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > oryaScriptEngineFc PangoEngineShape PangoRenderFc oriya:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > tamlScriptEngineFc PangoEngineShape PangoRenderFc tamil:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > teluScriptEngineFc PangoEngineShape PangoRenderFc telugu:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > kndaScriptEngineFc PangoEngineShape PangoRenderFc kannada:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > mlymScriptEngineFc PangoEngineShape PangoRenderFc malayalam:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so
> > > > sinhScriptEngineFc PangoEngineShape PangoRenderFc sinhala:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-hangul-fc.so
> > > > HangulScriptEngineFc PangoEngineShape PangoRenderFc hangul:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-syriac-fc.so
> > > > SyriacScriptEngineFc PangoEngineShape PangoRenderFc syriac:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-basic-fc.so
> > > > BasicScriptEngineFc PangoEngineShape PangoRenderFc armenian:*
> > > > bopomofo:* cherokee:* coptic:* cyrillic:* deseret:* ethiopic:*
> > > > georgian:* gothic:* greek:* han:* hiragana:* katakana:* latin:*
> > > > ogham:* old-italic:* runic:*
> > > > canadian-aboriginal:* yi:* braille:* cypriot:* limbu:* osmanya:*
> > > > shavian:* linear-b:* ugaritic:* common:
> > > > /usr/local/lib/pango/1.4.0/modules/pango-hebrew-fc.so
> > > > HebrewScriptEngineFc PangoEngineShape PangoRenderFc hebrew:*
> > > > /usr/local/lib/pango/1.4.0/modules/pango-tibetan-fc.so
> > > > TibetanScriptEngineFc PangoEngineShape PangoRenderFc tibetan:*
> > > >
> > > >
> > > > Then I ran /media/cdrom/installer --log again, but I get the same
> > > > error.
> > > >
> > > > So then I went back to Yast2 and checked on Pango.  Yast2 says Pango
> > > > is installed properly.
> > > >
> > > > What should I check next?
> > > >
> > > > Regards,
> > > > Daniel

Follow-Ups:
- Re: gEDA-user: Next spin of CD installer available
  - From: Bob Paddock

References:
- Re: gEDA-user: Next spin of CD installer available
  - From: Stuart Brorson

Prev by Author: Re: gEDA-user: Next spin of CD installer available
Next by Author: Re: gEDA-user: Printing your artwork
Previous by thread: Re: gEDA-user: Next spin of CD installer available
Next by thread: Re: gEDA-user: Next spin of CD installer available
Index(es):
- Author
- Thread