[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: gEDA-user: gschem2pcb netlist problem
Philipp Klaus Krause schrieb:
> I have a problem in a recently created schematic:
> gschem2pcb creates a netlist where +5V and GND are connected together.
> I do not see such a connection in the schematic (5V stuff is in the
> lower left corner only, VCC is +3.3V)
>
> gschem2pcb worked initially, then I realized that pins on the voltage
> regulator were wrong in the symbol. I changed the pin numbers in the
> symbol, now there's the problem. I already tried deleting and
> reinserting the voltage regulatgor symbol, but it didn't help.
>
> Philipp
I've solved the problem: There was a net=GND:2 in the symbol.
Philipp
_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user