[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: Creating bill of materials?

   oops, I forgot that in my original post:
   gEDA : GPL Electronic Design Automation
   This is gattrib -- gEDA's attribute editor
   Gattrib version: 1.6.1.20100214
   -J

   On Wed, Aug 17, 2011 at 11:10 AM, Andy Fierman
   <[1]andyfierman@xxxxxxxxxxxxxxx> wrote:

     What version of gattrib are you using?
     I opened a bug report on SourceForge about what seems to be the same
     problem back in 2009:
     Bugs item #2793743, was opened at 2009-05-19 11:18
     The version of gattrib I was using then was 1.4.0.20080127 from the
     Debian lenny repos.
     I don't know if that bug report can still be accessed since the
     SourceForge Tracker had been disabled:
     [2]https://sourceforge.net/tracker/?func=detail&atid=818426&aid=2793
     743&group_id=161080
     Sorry, knowledge buffer now empty.
              Andy.
     [3]signality.co.uk

   On 17 August 2011 15:40, John Hudak <[4]jjhudak@xxxxxxxxx> wrote:
   >   Very cool, thank you!  So, I tried it....and it produced output
   that
   >   was not expected, and I would go so far as to say that it is wrong.
   >   Attached is a jpg file of how the original attribute-component
   matrix
   >   looks like.....
   >   Then I do an "Add attribute column" and I get the result shown in
   >   modified attribute pic...
   >   Ummm, I expected to see a  blank column with my designated heading
   >   appended to the right of the existing column.  What I got was my
   new
   >   column PREPENDED before the last column, and populated with the
   >   contents of the original last column.  So what did I do wrong?!?
   >   John
   >
   >   On Wed, Aug 17, 2011 at 9:43 AM, Andy Fierman

   >   <[1][5]andyfierman@xxxxxxxxxxxxxxx> wrote:
   >
   >     Hi John,
   >     Sounds like you've not yet found this:

     >     [2][6]http://geda.seul.org/wiki/geda:faq-gnetlist

   >     I know, "netlist" isn't necessarily the first search term that
   comes
   >     to mind when looking for info on how to generate a BoM ...
   >     See also:

     >     [3][7]http://geda.seul.org/wiki/geda:faq-attribs
     >     Cheers,
     >              Andy.
     >     [4][8]signality.co.uk

   >
   >   On 17 August 2011 13:24, John Hudak <[5][9]jjhudak@xxxxxxxxx>
   wrote:
   >   >   Perhaps I have not progress through the development cycle far
   >   enough,
   >   >   but, it there a way generate a bill of materials (BoM) from
   gschem
   >   >   and/or PCB?  In my readings I have not come across reference to
   >   BoMs.
   >   >   I am thinking that one could be made by specifying the BoM
   headings
   >   of
   >   >   interest (which would be the desired attributes from gschem) in
   a
   >   BoM
   >   >   template file, have a program comb through the components in
   gschem
   >   and
   >   >   create a csv file suitable for Excel to use.
   >   >   Along these lines, are there program provisions in gschem
   and/or
   >   pcb
   >   >   that allows one to create user define attributes for a
   component?
   >   (e.g.
   >   >   component supplier, pointer to relevant documentation such as
   an
   >   app
   >   >   note, or even a note attribute).
   >   >   Again, thank you for your feedback
   >   >   John
   >   >
   >   >
   >   >
   >
   >     > _______________________________________________
   >     > geda-user mailing list

     >     > [6][10]geda-user@xxxxxxxxxxxxxx
     >     >
     [7][11]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
     >     >
     >     >
     >     _______________________________________________
     >     geda-user mailing list
     >     [8][12]geda-user@xxxxxxxxxxxxxx
     >     [9][13]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
     >
     > References
     >
     >   1. mailto:[14]andyfierman@xxxxxxxxxxxxxxx
     >   2. [15]http://geda.seul.org/wiki/geda:faq-gnetlist
     >   3. [16]http://geda.seul.org/wiki/geda:faq-attribs
     >   4. [17]http://signality.co.uk/
     >   5. mailto:[18]jjhudak@xxxxxxxxx
     >   6. mailto:[19]geda-user@xxxxxxxxxxxxxx
     >   7. [20]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
     >   8. mailto:[21]geda-user@xxxxxxxxxxxxxx
     >   9. [22]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user

   >
   >
   >
   > _______________________________________________
   > geda-user mailing list
   > [23]geda-user@xxxxxxxxxxxxxx
   > [24]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
   >
   >
   _______________________________________________
   geda-user mailing list
   [25]geda-user@xxxxxxxxxxxxxx
   [26]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user

References

   1. mailto:andyfierman@xxxxxxxxxxxxxxx
   2. https://sourceforge.net/tracker/?func=detail&atid=818426&aid=2793743&group_id=161080
   3. http://signality.co.uk/
   4. mailto:jjhudak@xxxxxxxxx
   5. mailto:andyfierman@xxxxxxxxxxxxxxx
   6. http://geda.seul.org/wiki/geda:faq-gnetlist
   7. http://geda.seul.org/wiki/geda:faq-attribs
   8. http://signality.co.uk/
   9. mailto:jjhudak@xxxxxxxxx
  10. mailto:geda-user@xxxxxxxxxxxxxx
  11. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
  12. mailto:geda-user@xxxxxxxxxxxxxx
  13. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
  14. mailto:andyfierman@xxxxxxxxxxxxxxx
  15. http://geda.seul.org/wiki/geda:faq-gnetlist
  16. http://geda.seul.org/wiki/geda:faq-attribs
  17. http://signality.co.uk/
  18. mailto:jjhudak@xxxxxxxxx
  19. mailto:geda-user@xxxxxxxxxxxxxx
  20. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
  21. mailto:geda-user@xxxxxxxxxxxxxx
  22. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
  23. mailto:geda-user@xxxxxxxxxxxxxx
  24. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
  25. mailto:geda-user@xxxxxxxxxxxxxx
  26. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user


_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user