[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: OT: need fine (5 to 10 mils) solder

To: geda-user@xxxxxxxx
Subject: Re: gEDA-user: OT: need fine (5 to 10 mils) solder
From: David Koski <david@xxxxxxxxxxxxxxxx>
Date: Mon, 13 Dec 2004 22:08:44 -0800
Delivered-to: archiver@seul.org
Delivered-to: geda-user-outgoing@seul.org
Delivered-to: geda-user@seul.org
Delivery-date: Tue, 14 Dec 2004 01:09:21 -0500
In-reply-to: <002d01c4e18b$2a46c000$0400a8c0@hwrd1.md.home.com>
References: <20041213140854.27004269@torvi.localnet> <20041213182233.35587e7a@torvi.localnet> <002d01c4e18b$2a46c000$0400a8c0@hwrd1.md.home.com>
Reply-to: geda-user@xxxxxxxx
Sender: owner-geda-user@xxxxxxxx

On Mon, 13 Dec 2004 22:15:29 -0500
"harry eaton" <bumpelo@xxxxxxxxxxx> wrote:

> I've had good success with the blob technique with lots of flux on a
> CTS series 741 resistor array..

Yep, those are the ones.  I have been using some rosin flux from the
local Radio Shack because that is what I had.  It doesn't smoke at
710 F.

Regards,
David

-- 
David Koski
david@xxxxxxxxxxxxxxxx

References:
- gEDA-user: OT: need fine (5 to 10 mils) solder
  - From: David Koski
- Re: gEDA-user: OT: need fine (5 to 10 mils) solder
  - From: David Koski
- Re: gEDA-user: OT: need fine (5 to 10 mils) solder
  - From: harry eaton

Prev by Author: Re: gEDA-user: OT: need fine (5 to 10 mils) solder
Next by Author: Re: gEDA-user: PC board preview
Previous by thread: Re: gEDA-user: OT: need fine (5 to 10 mils) solder
Next by thread: gEDA-user: netlist -> schematic
Index(es):
- Author
- Thread