Re: gEDA-user: PCB line limit of 255 in pcb

[Anthony Shanks <yamazakir2@xxxxxxxxx>]

This worked! Thanks

On Sat, Dec 26, 2009 at 3:41 AM, Ineiev <ineiev@xxxxxxxxx> wrote:
> On 12/26/09, Anthony Shanks <yamazakir2@xxxxxxxxx> wrote:
>> When loading up a netlist file, PCB complains if a single line is over
>> 255 characters and cuts out the rest of the line. I have a net with
>> lots of components connected to it (gnd) and the line ends up being
>> way over 255 characters. The workaround I have done is to split the
>> net into two nets with identical names (both named gnd), but pcb also
>> doesn't play nice with this as it doesn't rat the nets properly to gnd
>> and it I manually connect the new nets together it complains about the
>> nets being short. Of course they are shorted but they have the same
>> name.
>
> Have you tried to split lines with `\'?
>
> Hope that helps,
> Ineiev
>
>
> _______________________________________________
> geda-user mailing list
> geda-user@xxxxxxxxxxxxxx
> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
>


_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user