[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

gEDA-user: RE: pcb 1.99n automake version DJ Barrow and Egil Kvaleberg m4 added to library



Terry:

I got the same error.  All of the normal 'log' output seems to go to the
console I launch pcb from.  

My layouts are very simple, usually can be contained in 1 or at most 2
layers, and I've found that with autoroute, I end up with many vias
(something I try to avoid, as I don't send my boards out to fab, I do them
myself).

Basically the changes I see going from PCB 1.99j to 1.99n are the failure on
the log window and newer part libraries.

Of course, we're all running unreleased code ;)

-travis

-----Original Message-----
From: Terry Porter [mailto:techman@d2.net.au]
Sent: Monday, February 10, 2003 7:12 PM
<SNIP>

On Sun, 9 Feb 2003 23:15:59 +0100
Leva <leva@interware.hu> wrote:

<SNIP>
> http://web.interware.hu/leva/cuccok/pcb/pcb-1.99n.tar.gz
<SNIP>
Further testing has found that the above dies when the log window is
selected with
the error:-
X Error of failed request:  BadWindow (invalid Window parameter)
  Major opcode of failed request:  12 (X_ConfigureWindow)
  Resource id in failed request:  0x0
  Serial number of failed request:  2614
  Current serial number in output stream:  2616

This seems to be the only problem so far.

-- 
Kind Regards
Terry