[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: PCB pin hole size

To: geda-user@xxxxxxxx
Subject: Re: gEDA-user: PCB pin hole size
From: DJ Delorie <dj@xxxxxxxxxxx>
Date: Tue, 25 Jan 2005 08:14:43 -0500
Delivered-to: archiver@seul.org
Delivered-to: geda-user-outgoing@seul.org
Delivered-to: geda-user@seul.org
Delivery-date: Tue, 25 Jan 2005 08:15:25 -0500
In-reply-to: <200501251114.19517.wk@ire.pw.edu.pl> (message from Wojciech Kazubski on Tue, 25 Jan 2005 11:14:18 +0100)
References: <41F4FF85.9090207@ieee.org> <200501241530.56070.wk@ire.pw.edu.pl> <41F50B73.8060900@ieee.org> <200501251114.19517.wk@ire.pw.edu.pl>
Reply-to: geda-user@xxxxxxxx
Sender: owner-geda-user@xxxxxxxx

> > > I think that 20mils hole was used to serve as drill guide for manual
> > > drilling.
> >
> > crosses at hole centers.
>
> Ability to reduce holes would be usefull also for those who have to use 
> postscript to cerate masks. 

None of these ideas is right.  The drill sizes should be the final
hole sizes, and if you want a small dimple to help you get the hole
centered, choose the "drill helper" option when you print your
postscript files.  That puts an EXTRA circle in the middle of the hole
just for this purpose.

Follow-Ups:
- Re: gEDA-user: PCB pin hole size
  - From: Daniel Nilsson
- Re: gEDA-user: PCB pin hole size
  - From: Walter Fetter Lages

References:
- gEDA-user: PCB pin hole size
  - From: Walter Fetter Lages
- Re: gEDA-user: PCB pin hole size
  - From: Wojciech Kazubski
- Re: gEDA-user: PCB pin hole size
  - From: Walter Fetter Lages
- Re: gEDA-user: PCB pin hole size
  - From: Wojciech Kazubski

Prev by Author: Re: gEDA-user: PCB pin hole size
Next by Author: Re: gEDA-user: PCB pin hole size
Previous by thread: Re: gEDA-user: PCB pin hole size
Next by thread: Re: gEDA-user: PCB pin hole size
Index(es):
- Author
- Thread