Re: gEDA-user: schematic hierarchy netlist problem

[Peter Baxendale <peter.baxendale@xxxxxxxxxxxx>]

Found the answer to my own question by playing around a bit. The pins on
the top level symbol didn't have a pinnumber attribute - I didn't think
I needed them since they are meaningless. When I put them in, the
problem goes away. I've made them invisible so as not to give
meaningless info on the top level schematic.

On Thu, 2007-07-19 at 10:06 +0100, Peter Baxendale wrote:
> OK, thanks for the response. Attached is a very simple hierarchical
> design. The .pcb and .net files were generated by "gsch2pcb --skip-m4".
> You can see the U?-? in the .net file.
> 
> On Wed, 2007-07-18 at 07:11 -0400, John Luciani wrote:
> > On 7/18/07, Peter Baxendale <peter.baxendale@xxxxxxxxxxxx> wrote:
> > > I don't know where the U?-? comes from. It's not in any of the
> > > schematics, just in the netlist produced by gsch2pcb. Every net that
> > > connects to one of the io symbols ends in a U?-?. The line I quoted
> > > should only have 3 nodes, the extra U?-? looks to be entirely spurious.
> > > I should have said, I'm using the gschem 1.0.1-20070626 release.
> > 
> > You may want to post a simple schematic that demonstrates the problem.
> > 
> > (* jcl *)
> > 
> 
> _______________________________________________
> geda-user mailing list
> geda-user@xxxxxxxxxxxxxx
> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
-- 
------------------------------------------------------------
Peter Baxendale                       University of Durham
peter.baxendale@xxxxxxxxxxxx          School of Engineering
tel +44 191 33 42492                  South Road
fax +44 191 33 42408                  Durham DH1 3LE
                                      England
------------------------------------------------------------



_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user