Re: gEDA-user: IPC Least/Nominal/Most

[Stefan Salewski <mail@xxxxxxxxxxxx>]

On Thu, 2009-06-11 at 09:57 -0400, John Luciani wrote:
> For hand soldering which footprint variation are people using?
> 
> My existing passive footprints are very generous in length 

I tried to use your 0805 and 0603 (imperial) footprints. But the space
between the pads was very small, not much room for a trace. So I made my
own 0805 and 0603 with some more free area (only local copy, not
available at gedasymbols). For the 0805 there is now enough room for a
0.3mm trace, and for the 0603 for a 0.2mm trace with 0.2 mm clearance.

Element[0x00000000 "0603" "" "" 0 0 -6318 -10168 0 100 0x00000000]
(
	Pad[-3248 -98 -3248 98 3740 2000 4940 "1" "1" 0x00000100]
	Pad[3248 -98 3248 98 3740 2000 4940 "2" "2" 0x00000100]
	ElementLine [6318 3168 -6318 3168 800]
	ElementLine [-6318 3168 -6318 -3168 800]
	ElementLine [-6318 -3168 6318 -3168 800]
	ElementLine [6318 -3168 6318 3168 800]
)

Element[0x00000000 "0805" "" "" 0 0 -7695 -10956 0 100 0x00000000]
(
	Pad[-4133 -394 -4133 394 4724 2000 6324 "1" "1" 0x00000100]
	Pad[4134 -394 4134 394 4724 2000 6324 "2" "2" 0x00000100]
	ElementLine [7695 3956 -7695 3956 800]
	ElementLine [-7695 3956 -7695 -3956 800]
	ElementLine [-7695 -3956 7695 -3956 800]
	ElementLine [7695 -3956 7695 3956 800]
)




_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user