[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: PCB .8mm 44TQFP/ATmega32?

To: geda-user@seul.org
Subject: Re: gEDA-user: PCB .8mm 44TQFP/ATmega32?
From: Mario Klebsch <mario@klebsch.de>
Date: Mon, 10 May 2004 08:55:21 +0200
Delivered-to: archiver@seul.org
Delivered-to: geda-user-outgoing@seul.org
Delivered-to: geda-user@seul.org
Delivery-date: Mon, 10 May 2004 03:06:06 -0400
In-reply-to: <200405091833.58587.bpaddock@csonline.net>
References: <200405091833.58587.bpaddock@csonline.net>
Reply-to: geda-user@seul.org
Sender: owner-geda-user@seul.org

Hi!

Am 10.05.2004 um 00:33 schrieb Bob Paddock:

Anyone have a footprint for the Atmel ATmega32 44-pin, 0.8mm pitch part for
PCB? Then ones already there are different pitches. Thought I'd ask before
making one.

I thought, the QFP44_10 has 0.8mm pitch. I use it in my design, but it still is onnly on paper, not on copper. So I was not able te check, wether my parts really fit on this footprint.

73, Mario
--
Mario Klebsch mario@klebsch.de
PGP-Key available at http://www.klebsch.de/public.key
Fingerprint DSS: EE7C DBCC D9C8 5DC1 D4DB 1483 30CE 9FB2 A047 9CE0
Diffie-Hellman: D447 4ED6 8A10 2C65 C5E5 8B98 9464 53FF 9382 F518

Follow-Ups:
- Re: gEDA-user: PCB .8mm 44TQFP/ATmega32?
  - From: Bob Paddock <bpaddock@csonline.net>

References:
- gEDA-user: PCB .8mm 44TQFP/ATmega32?
  - From: Bob Paddock <bpaddock@csonline.net>

Prev by Author: Re: gEDA-user: Newbie PCB & gschem
Next by Author: Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
Previous by thread: gEDA-user: PCB .8mm 44TQFP/ATmega32?
Next by thread: Re: gEDA-user: PCB .8mm 44TQFP/ATmega32?
Index(es):
- Author
- Thread