Mail Index

• Thread Index

• gEDA-user: Fourth pin on 7805 regulator
  • From: Karel Kulhavý <clock@twibright.com>
• Re: gEDA-user: Fourth pin on 7805 regulator
  • From: Karel Kulhavý <clock@twibright.com>
• Re: gEDA-user: Stupid newbie question
  • From: Karel Kulhavý <clock@twibright.com>
• Re: gEDA-user: New symbols
  • From: Karel Kulhavý <clock@twibright.com>
• gEDA-user: virtex tools
  • From: Karel Kulhavý <clock@twibright.com>
• Re: gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: Al Davis <ad60@freeelectron.net>
• Re: gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: Al Davis <ad60@freeelectron.net>
• Re: gEDA-user: geda vs. SPARC
  • From: Albert Lederer <albertlederer@gmx.de>
• Re: gEDA-user: geda vs. SPARC
  • From: Albert Lederer <albertlederer@gmx.de>
• Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: gschem installation
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Assertion based verification using VCD and VHDL
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• gEDA-user: gschem wish list addition
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Assertion based verification using VCD and VHDL
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: gschem: Using mouse wheels for scrolling
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Question: Buss Implementation Status?
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: gschem: Using mouse wheels for scrolling
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: New symbols
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: gschem: Using mouse wheels for scrolling
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• Re: gEDA-user: Any Fink users out there?
  • From: Ales Hvezda <ahvezda@moria.seul.org>
• gEDA-user: Richard Stallman is checking into free EDA software...
  • From: Bill Cox <bill@viasic.com>
• Re: gEDA-user: Stupid newbie question
  • From: Bill Wilson <billw@wt.net>
• Re: gEDA-user: Stupid newbie question
  • From: Bill Wilson <billw@wt.net>
• Re: gEDA-user: Stupid newbie question
  • From: Bill Wilson <billw@wt.net>
• gEDA-user: Locking down auto-routed traces?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: DRC vs shorted nets?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: Locking down auto-routed traces?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: PCB .8mm 44TQFP/ATmega32?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: PCB .8mm 44TQFP/ATmega32?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: printing
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: Locking down auto-routed traces?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: PCB CTRL-H ChangeHole?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: Locking down auto-routed traces?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: How do you create soldermask?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: Standard Fiducial points?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: Newbie PCB & gschem
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: Constraining Drill Tool List?
  • From: Bob Paddock <bpaddock@csonline.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: How do you unmask via's in PCB?
  • From: Bob Paddock <bpaddock@csonline.net>
• gEDA-user: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Chad Robinson <crj@lucubration.com>
• Re: gEDA-user: solder masks, etc.
  • From: Charles Lepple <clepple@ghz.cc>
• Re: gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: "Charles Lepple" <clepple@ghz.cc>
• gEDA-user: Any Fink users out there?
  • From: Charles Lepple <clepple@ghz.cc>
• Re: gEDA-user: Locking down auto-routed traces?
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: geda vs. SPARC
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: solder masks, etc.
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: solder masks, etc.
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: solder masks, etc.
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: printing
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: Gschem Segment Fault
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: Gschem Segment Fault
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: Snap-to-pins, was: Stupid newbie question
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: New symbols
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: ANN: gerbv-0.16 released
  • From: Dan McMahill <dan@mcmahill.net>
• Re: gEDA-user: How do you unmask via's in PCB?
  • From: Dan McMahill <dan@mcmahill.net>
• gEDA-user: pcb-20040530 snapshot
  • From: Dan McMahill <dan@mcmahill.net>
• gEDA-user: PCB quad flat-pack symbols
  • From: Dave McGuire <mcguire@neurotica.com>
• Re: gEDA-user: PCB quad flat-pack symbols
  • From: Dave McGuire <mcguire@neurotica.com>
• Re: gEDA-user: PCB quad flat-pack symbols
  • From: Dave McGuire <mcguire@neurotica.com>
• gEDA-user: looking for SOJ-36 PCB element
  • From: Dave McGuire <mcguire@neurotica.com>
• Re: gEDA-user: Stupid newbie question
  • From: Dave McGuire <mcguire@neurotica.com>
• Re: gEDA-user: Newbie PCB & gschem
  • From: Dave McGuire <mcguire@neurotica.com>
• Re: gEDA-user: How do you create soldermask?
  • From: Dave McGuire <mcguire@neurotica.com>
• gEDA-user: solder masks, etc.
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: solder masks, etc.
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: solder masks, etc.
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: solder masks, etc.
  • From: David Koski <david@kosmosisland.com>
• gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: printing
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: Newbie PCB & gschem
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: How do you create soldermask?
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: How do you create soldermask?
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: pcb-20040530 snapshot
  • From: David Koski <david@kosmosisland.com>
• Re: gEDA-user: DRC vs shorted nets?
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: DRC vs shorted nets?
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: printing
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: printing
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: printing
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: PCB CTRL-H ChangeHole?
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: printing
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: Stupid newbie question
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: Constraining Drill Tool List?
  • From: DJ Delorie <dj@delorie.com>
• Re: gEDA-user: How do you unmask via's in PCB?
  • From: DJ Delorie <dj@delorie.com>
• gEDA-user: unsubscribe
  • From: Easy B <easy-b@freesurf.ch>
• gEDA-user: Fwd: unsubscribe
  • From: Easy B <easy-b@freesurf.ch>
• Re: gEDA-user: Any Fink users out there?
  • From: Easy B <easy-b@freesurf.ch>
• gEDA-user: spice questions
  • From: Eric Nist <enist@cox.net>
• gEDA-user: tclspice
  • From: Eric Nist <enist@cox.net>
• Re: gEDA-user: Locking down auto-routed traces?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: PCB quad flat-pack symbols
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: size of PCB
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: Locking down auto-routed traces?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: Fourth pin on 7805 regulator
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: How do you create soldermask?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: How do you create soldermask?
  • From: "harry eaton" <bumpelo@comcast.net>
• Re: gEDA-user: DRC vs shorted nets?
  • From: John Griessen <john_g@cibolo.com>
• Re: gEDA-user: DRC vs shorted nets?
  • From: John Griessen <john_g@cibolo.com>
• Re: gEDA-user: DRC vs shorted nets?
  • From: John Griessen <john_g@cibolo.com>
• Re: gEDA-user: Constraining Drill Tool List?
  • From: Karel Kulhavy <clock@twibright.com>
• gEDA-user: gschem installation
  • From: LAURENT Emmanuel <laurent.em@free.fr>
• Re: gEDA-user: gschem installation
  • From: LAURENT Emmanuel <laurent.em@free.fr>
• Re: gEDA-user: geda vs. SPARC
  • From: Levente KOVACS <leva@interware.hu>
• gEDA-user: size of PCB
  • From: Levente KOVACS <leva@interware.hu>
• Re: gEDA-user: geda vs. SPARC
  • From: Levente KOVACS <leva@interware.hu>
• Re: gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: Magnus Danielson <cfmd@bredband.net>
• Re: gEDA-user: How do you create soldermask?
  • From: Magnus Danielson <cfmd@bredband.net>
• Re: gEDA-user: Newbie PCB & gschem
  • From: Magnus Danielson <cfmd@bredband.net>
• Re: gEDA-user: PCB .8mm 44TQFP/ATmega32?
  • From: Mario Klebsch <mario@klebsch.de>
• Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Mario Klebsch <mario@klebsch.de>
• Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Mario Klebsch <mario@klebsch.de>
• Re: gEDA-user: Stupid newbie question
  • From: Mario Klebsch <mario@klebsch.de>
• Re: gEDA-user: Stupid newbie question
  • From: Mario Klebsch <mario@klebsch.de>
• gEDA-user: New symbols
  • From: Marvin Dickens <mpdickens@tlanta.com>
• Re: gEDA-user: New symbols
  • From: Marvin Dickens <mpdickens@tlanta.com>
• gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Mel <ehlem2003@yahoo.com>
• gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Mel <ehlem2003@yahoo.com>
• Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Mel <ehlem2003@yahoo.com>
• Re: gEDA-user: Assertion based verification using VCD and VHDL
  • From: Peter Kaiser <peter@easy-asic.de>
• Re: gEDA-user: tclspice
  • From: Peter Kaiser <peter@easy-asic.de>
• Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: Richard Barrington <richard@freedomwigs.com>
• Re: gEDA-user: Assertion based verification using VCD and VHDL
  • From: "Samuel A. Falvo II" <sam.falvo@falvotech.com>
• Re: gEDA-user: Newbie PCB & gschem
  • From: Sascha Silbe <sascha-ml-geda-user@silbe.org>
• gEDA-user: gschem: Using mouse wheels for scrolling
  • From: Sascha Silbe <sascha-ml-geda-user@silbe.org>
• Re: gEDA-user: gschem: Using mouse wheels for scrolling
  • From: Sascha Silbe <sascha-ml-geda-user@silbe.org>
• Re: gEDA-user: gschem: Using mouse wheels for scrolling
  • From: Sascha Silbe <sascha-ml-geda-user@silbe.org>
• gEDA-user: Newbie PCB & gschem
  • From: Shahab Sanjari <sanjari@hrz.tu-darmstadt.de>
• gEDA-user: ANN: gerbv-0.16 released
  • From: Stefan Petersen <spe@stacken.kth.se>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• Re: gEDA-user: DRC vs shorted nets?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• gEDA-user: Question: Buss Implementation Status?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• Re: gEDA-user: Question: Buss Implementation Status?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• Re: gEDA-user: How do you create soldermask?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• Re: gEDA-user: How do you create soldermask?
  • From: Stephen Meier <smeier@AlchemyResearch.com>
• Re: gEDA-user: Stupid newbie question
  • From: Steve Meier <smeier@alchemyresearch.com>
• Re: gEDA-user: Stupid newbie question
  • From: Steve Meier <smeier@alchemyresearch.com>
• Re: gEDA-user: gwave cannot find libguilegtk-1.2.so.0 ?
  • From: sdb@cloud9.net (Stuart Brorson)
• gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: sdb@cloud9.net (Stuart Brorson)
• Re: gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: sdb@cloud9.net (Stuart Brorson)
• Re: gEDA-user: Stupid newbie question
  • From: sdb@cloud9.net (Stuart Brorson)
• Re: gEDA-user: tclspice
  • From: sdb@cloud9.net (Stuart Brorson)
• gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• Re: gEDA-user: Gschem Segment Fault
  • From: "Thomas D. Dean" <tomdean@speakeasy.org>
• gEDA-user: PCAD or MCAD converters?
  • From: Tim Alberts <talberts@msiscales.com>
• Re: gEDA-user: Assertion based verification using VCD and VHDL
  • From: Tom Hawkins <tom@launchbird.com>
• Re: gEDA-user: Assertion based verification using VCD and VHDL
  • From: Tom Hawkins <tom@launchbird.com>
• gEDA-user: DAC Anyone?
  • From: Tom Hawkins <tom@launchbird.com>
• gEDA-user: Deepchip mentions Icarus
  • From: Tom Hawkins <tom@launchbird.com>
• Re: gEDA-user: SPICE/gEDA going to the LDP . . .
  • From: Wojciech Kazubski <wk@ire.pw.edu.pl>