Re: gEDA-user: Comments on pcb's g-code exporter & HeeksCAD/HeeksCNC FOSS program for pcb milling

[Markus Hitter <mah@xxxxxxxxxxx>]

Am 11.11.2010 um 20:28 schrieb dfro@xxxxxxxxx:

> The drill xxx.gcode.drill.cnc file goes through the board drilling  
> all of the holes without differentiating the different drill sizes  
> (found in the xxx.fab.gbr file). And, there are no tool change g- 
> codes for changing between drill sizes.

You have an old version of the G-code exporter. Ths sorting is done  
already, just the T command is missing. See:

http://sourceforge.net/tracker/index.php? 
func=detail&aid=3100354&group_id=73743&atid=538813

That said, I plan to mill bigger holes with the mill bit: drill with  
a 0.8 mm bit, do an outline mill with an 1.0 mm bit and everything is  
appropriate with just one tool change.


Markus

- - - - - - - - - - - - - - - - - - -
Dipl. Ing. (FH) Markus Hitter
http://www.jump-ing.de/







_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user