Hi Stefan,
On Mon, 2009-04-06 at 02:19 +0200, Stefan Salewski wrote:
> Hello,
>
> there exits some trimmers which can be adjusted from top and from bottom
> -- for the later we need a hole in the pcb.
>
> I am not absolutely sure how the pin which makes this hole should be
> defined. I did some search for examples at gedasymbols and in the wiki,
> but there seems to be more than one way.
>
> Simple make drill dia equal to outer pad dia? Use the hole flag -- or is
> this flag for internal use of PCB only? Use "" for name and number?
>
> For the following example I have used drill==thickness and set the hole
> flag:
>
> Element["" "" "TRIMR" "" 0 0 -13780 -21280 0 100 ""]
> (
> Pin[-11811 -3937 7874 2000 9074 4921 "1" "1" ""]
> Pin[0 11811 7874 2000 9074 4921 "2" "2" ""]
> Pin[11811 -3937 7874 2000 9074 4921 "3" "3" ""]
> Pin[0 0 7874 2000 9074 7874 "" "" "hole"]
> ElementArc[0 0 13780 13780 5 62 1000]
> ElementArc[0 0 13780 13780 113 62 1000]
> ElementArc[0 0 13780 13780 222 96 1000]
> Attribute("comment" "arbitrary test data")
> )
>
> Is this correct?
>
> Best regards
>
> Stefan Salewski
>
>
>
See attachment.
Kind regards,
Bert Timmerman.
Attachment:
TRIM_Piher_PT-10LV_PT-10_MTG400.fp
Description: application/pcb-footprint
_______________________________________________ geda-user mailing list geda-user@xxxxxxxxxxxxxx http://www.seul.org/cgi-bin/mailman/listinfo/geda-user